© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f7xx
+ * @{
+ */
+
+#ifndef __STM32F7xx_H
+#define __STM32F7xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/**
+ * @brief STM32 Family
+ */
+#if !defined (STM32F7)
+#define STM32F7
+#endif /* STM32F7 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+#if !defined (STM32F756xx) && !defined (STM32F746xx) && !defined (STM32F745xx) && !defined (STM32F767xx) && \
+ !defined (STM32F769xx) && !defined (STM32F777xx) && !defined (STM32F779xx) && !defined (STM32F722xx) && \
+ !defined (STM32F723xx) && !defined (STM32F732xx) && !defined (STM32F733xx)
+ /* #define STM32F756xx */ /*!< STM32F756VG, STM32F756ZG, STM32F756ZG, STM32F756IG, STM32F756BG,
+ STM32F756NG Devices */
+ /* #define STM32F746xx */ /*!< STM32F746VE, STM32F746VG, STM32F746ZE, STM32F746ZG, STM32F746IE, STM32F746IG,
+ STM32F746BE, STM32F746BG, STM32F746NE, STM32F746NG Devices */
+ /* #define STM32F745xx */ /*!< STM32F745VE, STM32F745VG, STM32F745ZG, STM32F745ZE, STM32F745IE, STM32F745IG Devices */
+ /* #define STM32F765xx */ /*!< STM32F765BI, STM32F765BG, STM32F765NI, STM32F765NG, STM32F765II, STM32F765IG,
+ STM32F765ZI, STM32F765ZG, STM32F765VI, STM32F765VG Devices */
+ /* #define STM32F767xx */ /*!< STM32F767BG, STM32F767BI, STM32F767IG, STM32F767II, STM32F767NG, STM32F767NI,
+ STM32F767VG, STM32F767VI, STM32F767ZG, STM32F767ZI Devices */
+ /* #define STM32F769xx */ /*!< STM32F769AG, STM32F769AI, STM32F769BG, STM32F769BI, STM32F769IG, STM32F769II,
+ STM32F769NG, STM32F769NI, STM32F768AI Devices */
+ /* #define STM32F777xx */ /*!< STM32F777VI, STM32F777ZI, STM32F777II, STM32F777BI, STM32F777NI Devices */
+ /* #define STM32F779xx */ /*!< STM32F779II, STM32F779BI, STM32F779NI, STM32F779AI, STM32F778AI Devices */
+ /* #define STM32F722xx */ /*!< STM32F722IE, STM32F722ZE, STM32F722VE, STM32F722RE, STM32F722IC, STM32F722ZC,
+ STM32F722VC, STM32F722RC Devices */
+ /* #define STM32F723xx */ /*!< STM32F723IE, STM32F723ZE, STM32F723VE, STM32F723IC, STM32F723ZC, STM32F723VC Devices */
+ /* #define STM32F732xx */ /*!< STM32F732IE, STM32F732ZE, STM32F732VE, STM32F732RE Devices */
+ /* #define STM32F733xx */ /*!< STM32F733IE, STM32F733ZE, STM32F733VE Devices */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+ /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V1.2.2
+ */
+#define __STM32F7_CMSIS_VERSION_MAIN (0x01) /*!< [31:24] main version */
+#define __STM32F7_CMSIS_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */
+#define __STM32F7_CMSIS_VERSION_SUB2 (0x02) /*!< [15:8] sub2 version */
+#define __STM32F7_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F7_CMSIS_VERSION ((__STM32F7_CMSIS_VERSION_MAIN << 24)\
+ |(__STM32F7_CMSIS_VERSION_SUB1 << 16)\
+ |(__STM32F7_CMSIS_VERSION_SUB2 << 8 )\
+ |(__STM32F7_CMSIS_VERSION))
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+#if defined(STM32F722xx)
+ #include "stm32f722xx.h"
+#elif defined(STM32F723xx)
+ #include "stm32f723xx.h"
+#elif defined(STM32F732xx)
+ #include "stm32f732xx.h"
+#elif defined(STM32F733xx)
+ #include "stm32f733xx.h"
+#elif defined(STM32F756xx)
+ #include "stm32f756xx.h"
+#elif defined(STM32F746xx)
+ #include "stm32f746xx.h"
+#elif defined(STM32F745xx)
+ #include "stm32f745xx.h"
+#elif defined(STM32F765xx)
+ #include "stm32f765xx.h"
+#elif defined(STM32F767xx)
+ #include "stm32f767xx.h"
+#elif defined(STM32F769xx)
+ #include "stm32f769xx.h"
+#elif defined(STM32F777xx)
+ #include "stm32f777xx.h"
+#elif defined(STM32F779xx)
+ #include "stm32f779xx.h"
+#else
+ #error "Please select first the target STM32F7xx device used in your application (in stm32f7xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0U,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0U,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0U,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+/**
+ * @}
+ */
+
+#ifdef USE_HAL_DRIVER
+ #include "stm32f7xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F7xx_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h
new file mode 100644
index 00000000..140be1b6
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h
@@ -0,0 +1,123 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f7xx.h
+ * @author MCD Application Team
+ * @brief CMSIS Cortex-M7 Device System Source File for STM32F7xx devices.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f7xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F7XX_H
+#define __SYSTEM_STM32F7XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F7xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F7xx_System_Exported_Variables
+ * @{
+ */
+ /* The SystemCoreClock variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */
+extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F7xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F7xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F7xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F7XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/arm_common_tables.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/arm_common_tables.h
new file mode 100644
index 00000000..8742a569
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/arm_common_tables.h
@@ -0,0 +1,136 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
+*
+* $Date: 19. October 2015
+* $Revision: V.1.4.5 a
+*
+* Project: CMSIS DSP Library
+* Title: arm_common_tables.h
+*
+* Description: This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+* - Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* - Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in
+* the documentation and/or other materials provided with the
+* distribution.
+* - Neither the name of ARM LIMITED nor the names of its contributors
+* may be used to endorse or promote products derived from this
+* software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+#ifndef _ARM_COMMON_TABLES_H
+#define _ARM_COMMON_TABLES_H
+
+#include "arm_math.h"
+
+extern const uint16_t armBitRevTable[1024];
+extern const q15_t armRecipTableQ15[64];
+extern const q31_t armRecipTableQ31[64];
+/* extern const q31_t realCoefAQ31[1024]; */
+/* extern const q31_t realCoefBQ31[1024]; */
+extern const float32_t twiddleCoef_16[32];
+extern const float32_t twiddleCoef_32[64];
+extern const float32_t twiddleCoef_64[128];
+extern const float32_t twiddleCoef_128[256];
+extern const float32_t twiddleCoef_256[512];
+extern const float32_t twiddleCoef_512[1024];
+extern const float32_t twiddleCoef_1024[2048];
+extern const float32_t twiddleCoef_2048[4096];
+extern const float32_t twiddleCoef_4096[8192];
+#define twiddleCoef twiddleCoef_4096
+extern const q31_t twiddleCoef_16_q31[24];
+extern const q31_t twiddleCoef_32_q31[48];
+extern const q31_t twiddleCoef_64_q31[96];
+extern const q31_t twiddleCoef_128_q31[192];
+extern const q31_t twiddleCoef_256_q31[384];
+extern const q31_t twiddleCoef_512_q31[768];
+extern const q31_t twiddleCoef_1024_q31[1536];
+extern const q31_t twiddleCoef_2048_q31[3072];
+extern const q31_t twiddleCoef_4096_q31[6144];
+extern const q15_t twiddleCoef_16_q15[24];
+extern const q15_t twiddleCoef_32_q15[48];
+extern const q15_t twiddleCoef_64_q15[96];
+extern const q15_t twiddleCoef_128_q15[192];
+extern const q15_t twiddleCoef_256_q15[384];
+extern const q15_t twiddleCoef_512_q15[768];
+extern const q15_t twiddleCoef_1024_q15[1536];
+extern const q15_t twiddleCoef_2048_q15[3072];
+extern const q15_t twiddleCoef_4096_q15[6144];
+extern const float32_t twiddleCoef_rfft_32[32];
+extern const float32_t twiddleCoef_rfft_64[64];
+extern const float32_t twiddleCoef_rfft_128[128];
+extern const float32_t twiddleCoef_rfft_256[256];
+extern const float32_t twiddleCoef_rfft_512[512];
+extern const float32_t twiddleCoef_rfft_1024[1024];
+extern const float32_t twiddleCoef_rfft_2048[2048];
+extern const float32_t twiddleCoef_rfft_4096[4096];
+
+
+/* floating-point bit reversal tables */
+#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20 )
+#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48 )
+#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56 )
+#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208 )
+#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440 )
+#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448 )
+#define ARMBITREVINDEXTABLE1024_TABLE_LENGTH ((uint16_t)1800)
+#define ARMBITREVINDEXTABLE2048_TABLE_LENGTH ((uint16_t)3808)
+#define ARMBITREVINDEXTABLE4096_TABLE_LENGTH ((uint16_t)4032)
+
+extern const uint16_t armBitRevIndexTable16[ARMBITREVINDEXTABLE__16_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable32[ARMBITREVINDEXTABLE__32_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable64[ARMBITREVINDEXTABLE__64_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable128[ARMBITREVINDEXTABLE_128_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable256[ARMBITREVINDEXTABLE_256_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable512[ARMBITREVINDEXTABLE_512_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable1024[ARMBITREVINDEXTABLE1024_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE2048_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE4096_TABLE_LENGTH];
+
+/* fixed-point bit reversal tables */
+#define ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH ((uint16_t)12 )
+#define ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH ((uint16_t)24 )
+#define ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH ((uint16_t)56 )
+#define ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH ((uint16_t)112 )
+#define ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH ((uint16_t)240 )
+#define ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH ((uint16_t)480 )
+#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992 )
+#define ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH ((uint16_t)1984)
+#define ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH ((uint16_t)4032)
+
+extern const uint16_t armBitRevIndexTable_fixed_16[ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_32[ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_64[ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_128[ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_256[ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_512[ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_1024[ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_2048[ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_4096[ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH];
+
+/* Tables for Fast Math Sine and Cosine */
+extern const float32_t sinTable_f32[FAST_MATH_TABLE_SIZE + 1];
+extern const q31_t sinTable_q31[FAST_MATH_TABLE_SIZE + 1];
+extern const q15_t sinTable_q15[FAST_MATH_TABLE_SIZE + 1];
+
+#endif /* ARM_COMMON_TABLES_H */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/arm_const_structs.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/arm_const_structs.h
new file mode 100644
index 00000000..726d06eb
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/arm_const_structs.h
@@ -0,0 +1,79 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
+*
+* $Date: 19. March 2015
+* $Revision: V.1.4.5
+*
+* Project: CMSIS DSP Library
+* Title: arm_const_structs.h
+*
+* Description: This file has constant structs that are initialized for
+* user convenience. For example, some can be given as
+* arguments to the arm_cfft_f32() function.
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+* - Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* - Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in
+* the documentation and/or other materials provided with the
+* distribution.
+* - Neither the name of ARM LIMITED nor the names of its contributors
+* may be used to endorse or promote products derived from this
+* software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+#ifndef _ARM_CONST_STRUCTS_H
+#define _ARM_CONST_STRUCTS_H
+
+#include "arm_math.h"
+#include "arm_common_tables.h"
+
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096;
+
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096;
+
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096;
+
+#endif
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/arm_math.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/arm_math.h
new file mode 100644
index 00000000..d33f8a9b
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/arm_math.h
@@ -0,0 +1,7154 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2015 ARM Limited. All rights reserved.
+*
+* $Date: 20. October 2015
+* $Revision: V1.4.5 b
+*
+* Project: CMSIS DSP Library
+* Title: arm_math.h
+*
+* Description: Public header file for CMSIS DSP Library
+*
+* Target Processor: Cortex-M7/Cortex-M4/Cortex-M3/Cortex-M0
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+* - Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* - Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in
+* the documentation and/or other materials provided with the
+* distribution.
+* - Neither the name of ARM LIMITED nor the names of its contributors
+* may be used to endorse or promote products derived from this
+* software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+ * -------------------------------------------------------------------- */
+
+/**
+ \mainpage CMSIS DSP Software Library
+ *
+ * Introduction
+ * ------------
+ *
+ * This user manual describes the CMSIS DSP software library,
+ * a suite of common signal processing functions for use on Cortex-M processor based devices.
+ *
+ * The library is divided into a number of functions each covering a specific category:
+ * - Basic math functions
+ * - Fast math functions
+ * - Complex math functions
+ * - Filters
+ * - Matrix functions
+ * - Transforms
+ * - Motor control functions
+ * - Statistical functions
+ * - Support functions
+ * - Interpolation functions
+ *
+ * The library has separate functions for operating on 8-bit integers, 16-bit integers,
+ * 32-bit integer and 32-bit floating-point values.
+ *
+ * Using the Library
+ * ------------
+ *
+ * The library installer contains prebuilt versions of the libraries in the Lib folder.
+ * - arm_cortexM7lfdp_math.lib (Little endian and Double Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7bfdp_math.lib (Big endian and Double Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7lfsp_math.lib (Little endian and Single Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7bfsp_math.lib (Big endian and Single Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7l_math.lib (Little endian on Cortex-M7)
+ * - arm_cortexM7b_math.lib (Big endian on Cortex-M7)
+ * - arm_cortexM4lf_math.lib (Little endian and Floating Point Unit on Cortex-M4)
+ * - arm_cortexM4bf_math.lib (Big endian and Floating Point Unit on Cortex-M4)
+ * - arm_cortexM4l_math.lib (Little endian on Cortex-M4)
+ * - arm_cortexM4b_math.lib (Big endian on Cortex-M4)
+ * - arm_cortexM3l_math.lib (Little endian on Cortex-M3)
+ * - arm_cortexM3b_math.lib (Big endian on Cortex-M3)
+ * - arm_cortexM0l_math.lib (Little endian on Cortex-M0 / CortexM0+)
+ * - arm_cortexM0b_math.lib (Big endian on Cortex-M0 / CortexM0+)
+ *
+ * The library functions are declared in the public file arm_math.h which is placed in the Include folder.
+ * Simply include this file and link the appropriate library in the application and begin calling the library functions. The Library supports single
+ * public header file arm_math.h for Cortex-M7/M4/M3/M0/M0+ with little endian and big endian. Same header file will be used for floating point unit(FPU) variants.
+ * Define the appropriate pre processor MACRO ARM_MATH_CM7 or ARM_MATH_CM4 or ARM_MATH_CM3 or
+ * ARM_MATH_CM0 or ARM_MATH_CM0PLUS depending on the target processor in the application.
+ *
+ * Examples
+ * --------
+ *
+ * The library ships with a number of examples which demonstrate how to use the library functions.
+ *
+ * Toolchain Support
+ * ------------
+ *
+ * The library has been developed and tested with MDK-ARM version 5.14.0.0
+ * The library is being tested in GCC and IAR toolchains and updates on this activity will be made available shortly.
+ *
+ * Building the Library
+ * ------------
+ *
+ * The library installer contains a project file to re build libraries on MDK-ARM Tool chain in the CMSIS\\DSP_Lib\\Source\\ARM folder.
+ * - arm_cortexM_math.uvprojx
+ *
+ *
+ * The libraries can be built by opening the arm_cortexM_math.uvprojx project in MDK-ARM, selecting a specific target, and defining the optional pre processor MACROs detailed above.
+ *
+ * Pre-processor Macros
+ * ------------
+ *
+ * Each library project have differant pre-processor macros.
+ *
+ * - UNALIGNED_SUPPORT_DISABLE:
+ *
+ * Define macro UNALIGNED_SUPPORT_DISABLE, If the silicon does not support unaligned memory access
+ *
+ * - ARM_MATH_BIG_ENDIAN:
+ *
+ * Define macro ARM_MATH_BIG_ENDIAN to build the library for big endian targets. By default library builds for little endian targets.
+ *
+ * - ARM_MATH_MATRIX_CHECK:
+ *
+ * Define macro ARM_MATH_MATRIX_CHECK for checking on the input and output sizes of matrices
+ *
+ * - ARM_MATH_ROUNDING:
+ *
+ * Define macro ARM_MATH_ROUNDING for rounding on support functions
+ *
+ * - ARM_MATH_CMx:
+ *
+ * Define macro ARM_MATH_CM4 for building the library on Cortex-M4 target, ARM_MATH_CM3 for building library on Cortex-M3 target
+ * and ARM_MATH_CM0 for building library on Cortex-M0 target, ARM_MATH_CM0PLUS for building library on Cortex-M0+ target, and
+ * ARM_MATH_CM7 for building the library on cortex-M7.
+ *
+ * - __FPU_PRESENT:
+ *
+ * Initialize macro __FPU_PRESENT = 1 when building on FPU supported Targets. Enable this macro for M4bf and M4lf libraries
+ *
+ *
+ * CMSIS-DSP in ARM::CMSIS Pack
+ * -----------------------------
+ *
+ * The following files relevant to CMSIS-DSP are present in the ARM::CMSIS Pack directories:
+ * |File/Folder |Content |
+ * |------------------------------|------------------------------------------------------------------------|
+ * |\b CMSIS\\Documentation\\DSP | This documentation |
+ * |\b CMSIS\\DSP_Lib | Software license agreement (license.txt) |
+ * |\b CMSIS\\DSP_Lib\\Examples | Example projects demonstrating the usage of the library functions |
+ * |\b CMSIS\\DSP_Lib\\Source | Source files for rebuilding the library |
+ *
+ *
+ * Revision History of CMSIS-DSP
+ * ------------
+ * Please refer to \ref ChangeLog_pg.
+ *
+ * Copyright Notice
+ * ------------
+ *
+ * Copyright (C) 2010-2015 ARM Limited. All rights reserved.
+ */
+
+
+/**
+ * @defgroup groupMath Basic Math Functions
+ */
+
+/**
+ * @defgroup groupFastMath Fast Math Functions
+ * This set of functions provides a fast approximation to sine, cosine, and square root.
+ * As compared to most of the other functions in the CMSIS math library, the fast math functions
+ * operate on individual values and not arrays.
+ * There are separate functions for Q15, Q31, and floating-point data.
+ *
+ */
+
+/**
+ * @defgroup groupCmplxMath Complex Math Functions
+ * This set of functions operates on complex data vectors.
+ * The data in the complex arrays is stored in an interleaved fashion
+ * (real, imag, real, imag, ...).
+ * In the API functions, the number of samples in a complex array refers
+ * to the number of complex values; the array contains twice this number of
+ * real values.
+ */
+
+/**
+ * @defgroup groupFilters Filtering Functions
+ */
+
+/**
+ * @defgroup groupMatrix Matrix Functions
+ *
+ * This set of functions provides basic matrix math operations.
+ * The functions operate on matrix data structures. For example,
+ * the type
+ * definition for the floating-point matrix structure is shown
+ * below:
+ *
+ * typedef struct
+ * {
+ * uint16_t numRows; // number of rows of the matrix.
+ * uint16_t numCols; // number of columns of the matrix.
+ * float32_t *pData; // points to the data of the matrix.
+ * } arm_matrix_instance_f32;
+ *
+ * There are similar definitions for Q15 and Q31 data types.
+ *
+ * The structure specifies the size of the matrix and then points to
+ * an array of data. The array is of size numRows X numCols
+ * and the values are arranged in row order. That is, the
+ * matrix element (i, j) is stored at:
+ *
+ * pData[i*numCols + j]
+ *
+ *
+ * \par Init Functions
+ * There is an associated initialization function for each type of matrix
+ * data structure.
+ * The initialization function sets the values of the internal structure fields.
+ * Refer to the function arm_mat_init_f32(), arm_mat_init_q31()
+ * and arm_mat_init_q15() for floating-point, Q31 and Q15 types, respectively.
+ *
+ * \par
+ * Use of the initialization function is optional. However, if initialization function is used
+ * then the instance structure cannot be placed into a const data section.
+ * To place the instance structure in a const data
+ * section, manually initialize the data structure. For example:
+ *
+ * arm_matrix_instance_f32 S = {nRows, nColumns, pData};
+ * arm_matrix_instance_q31 S = {nRows, nColumns, pData};
+ * arm_matrix_instance_q15 S = {nRows, nColumns, pData};
+ *
+ * where nRows specifies the number of rows, nColumns
+ * specifies the number of columns, and pData points to the
+ * data array.
+ *
+ * \par Size Checking
+ * By default all of the matrix functions perform size checking on the input and
+ * output matrices. For example, the matrix addition function verifies that the
+ * two input matrices and the output matrix all have the same number of rows and
+ * columns. If the size check fails the functions return:
+ *
+ * ARM_MATH_SIZE_MISMATCH
+ *
+ * Otherwise the functions return
+ *
+ * ARM_MATH_SUCCESS
+ *
+ * There is some overhead associated with this matrix size checking.
+ * The matrix size checking is enabled via the \#define
+ *
+ * ARM_MATH_MATRIX_CHECK
+ *
+ * within the library project settings. By default this macro is defined
+ * and size checking is enabled. By changing the project settings and
+ * undefining this macro size checking is eliminated and the functions
+ * run a bit faster. With size checking disabled the functions always
+ * return ARM_MATH_SUCCESS.
+ */
+
+/**
+ * @defgroup groupTransforms Transform Functions
+ */
+
+/**
+ * @defgroup groupController Controller Functions
+ */
+
+/**
+ * @defgroup groupStats Statistics Functions
+ */
+/**
+ * @defgroup groupSupport Support Functions
+ */
+
+/**
+ * @defgroup groupInterpolation Interpolation Functions
+ * These functions perform 1- and 2-dimensional interpolation of data.
+ * Linear interpolation is used for 1-dimensional data and
+ * bilinear interpolation is used for 2-dimensional data.
+ */
+
+/**
+ * @defgroup groupExamples Examples
+ */
+#ifndef _ARM_MATH_H
+#define _ARM_MATH_H
+
+/* ignore some GCC warnings */
+#if defined ( __GNUC__ )
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wsign-conversion"
+#pragma GCC diagnostic ignored "-Wconversion"
+#pragma GCC diagnostic ignored "-Wunused-parameter"
+#endif
+
+#define __CMSIS_GENERIC /* disable NVIC and Systick functions */
+
+#if defined(ARM_MATH_CM7)
+ #include "core_cm7.h"
+#elif defined (ARM_MATH_CM4)
+ #include "core_cm4.h"
+#elif defined (ARM_MATH_CM3)
+ #include "core_cm3.h"
+#elif defined (ARM_MATH_CM0)
+ #include "core_cm0.h"
+ #define ARM_MATH_CM0_FAMILY
+#elif defined (ARM_MATH_CM0PLUS)
+ #include "core_cm0plus.h"
+ #define ARM_MATH_CM0_FAMILY
+#else
+ #error "Define according the used Cortex core ARM_MATH_CM7, ARM_MATH_CM4, ARM_MATH_CM3, ARM_MATH_CM0PLUS or ARM_MATH_CM0"
+#endif
+
+#undef __CMSIS_GENERIC /* enable NVIC and Systick functions */
+#include "string.h"
+#include "math.h"
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+
+ /**
+ * @brief Macros required for reciprocal calculation in Normalized LMS
+ */
+
+#define DELTA_Q31 (0x100)
+#define DELTA_Q15 0x5
+#define INDEX_MASK 0x0000003F
+#ifndef PI
+#define PI 3.14159265358979f
+#endif
+
+ /**
+ * @brief Macros required for SINE and COSINE Fast math approximations
+ */
+
+#define FAST_MATH_TABLE_SIZE 512
+#define FAST_MATH_Q31_SHIFT (32 - 10)
+#define FAST_MATH_Q15_SHIFT (16 - 10)
+#define CONTROLLER_Q31_SHIFT (32 - 9)
+#define TABLE_SIZE 256
+#define TABLE_SPACING_Q31 0x400000
+#define TABLE_SPACING_Q15 0x80
+
+ /**
+ * @brief Macros required for SINE and COSINE Controller functions
+ */
+ /* 1.31(q31) Fixed value of 2/360 */
+ /* -1 to +1 is divided into 360 values so total spacing is (2/360) */
+#define INPUT_SPACING 0xB60B61
+
+ /**
+ * @brief Macro for Unaligned Support
+ */
+#ifndef UNALIGNED_SUPPORT_DISABLE
+ #define ALIGN4
+#else
+ #if defined (__GNUC__)
+ #define ALIGN4 __attribute__((aligned(4)))
+ #else
+ #define ALIGN4 __align(4)
+ #endif
+#endif /* #ifndef UNALIGNED_SUPPORT_DISABLE */
+
+ /**
+ * @brief Error status returned by some functions in the library.
+ */
+
+ typedef enum
+ {
+ ARM_MATH_SUCCESS = 0, /**< No error */
+ ARM_MATH_ARGUMENT_ERROR = -1, /**< One or more arguments are incorrect */
+ ARM_MATH_LENGTH_ERROR = -2, /**< Length of data buffer is incorrect */
+ ARM_MATH_SIZE_MISMATCH = -3, /**< Size of matrices is not compatible with the operation. */
+ ARM_MATH_NANINF = -4, /**< Not-a-number (NaN) or infinity is generated */
+ ARM_MATH_SINGULAR = -5, /**< Generated by matrix inversion if the input matrix is singular and cannot be inverted. */
+ ARM_MATH_TEST_FAILURE = -6 /**< Test Failed */
+ } arm_status;
+
+ /**
+ * @brief 8-bit fractional data type in 1.7 format.
+ */
+ typedef int8_t q7_t;
+
+ /**
+ * @brief 16-bit fractional data type in 1.15 format.
+ */
+ typedef int16_t q15_t;
+
+ /**
+ * @brief 32-bit fractional data type in 1.31 format.
+ */
+ typedef int32_t q31_t;
+
+ /**
+ * @brief 64-bit fractional data type in 1.63 format.
+ */
+ typedef int64_t q63_t;
+
+ /**
+ * @brief 32-bit floating-point type definition.
+ */
+ typedef float float32_t;
+
+ /**
+ * @brief 64-bit floating-point type definition.
+ */
+ typedef double float64_t;
+
+ /**
+ * @brief definition to read/write two 16 bit values.
+ */
+#if defined __CC_ARM
+ #define __SIMD32_TYPE int32_t __packed
+ #define CMSIS_UNUSED __attribute__((unused))
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __SIMD32_TYPE int32_t
+ #define CMSIS_UNUSED __attribute__((unused))
+
+#elif defined __GNUC__
+ #define __SIMD32_TYPE int32_t
+ #define CMSIS_UNUSED __attribute__((unused))
+
+#elif defined __ICCARM__
+ #define __SIMD32_TYPE int32_t __packed
+ #define CMSIS_UNUSED
+
+#elif defined __CSMC__
+ #define __SIMD32_TYPE int32_t
+ #define CMSIS_UNUSED
+
+#elif defined __TASKING__
+ #define __SIMD32_TYPE __unaligned int32_t
+ #define CMSIS_UNUSED
+
+#else
+ #error Unknown compiler
+#endif
+
+#define __SIMD32(addr) (*(__SIMD32_TYPE **) & (addr))
+#define __SIMD32_CONST(addr) ((__SIMD32_TYPE *)(addr))
+#define _SIMD32_OFFSET(addr) (*(__SIMD32_TYPE *) (addr))
+#define __SIMD64(addr) (*(int64_t **) & (addr))
+
+#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
+ /**
+ * @brief definition to pack two 16 bit values.
+ */
+#define __PKHBT(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0x0000FFFF) | \
+ (((int32_t)(ARG2) << ARG3) & (int32_t)0xFFFF0000) )
+#define __PKHTB(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0xFFFF0000) | \
+ (((int32_t)(ARG2) >> ARG3) & (int32_t)0x0000FFFF) )
+
+#endif
+
+
+ /**
+ * @brief definition to pack four 8 bit values.
+ */
+#ifndef ARM_MATH_BIG_ENDIAN
+
+#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v0) << 0) & (int32_t)0x000000FF) | \
+ (((int32_t)(v1) << 8) & (int32_t)0x0000FF00) | \
+ (((int32_t)(v2) << 16) & (int32_t)0x00FF0000) | \
+ (((int32_t)(v3) << 24) & (int32_t)0xFF000000) )
+#else
+
+#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v3) << 0) & (int32_t)0x000000FF) | \
+ (((int32_t)(v2) << 8) & (int32_t)0x0000FF00) | \
+ (((int32_t)(v1) << 16) & (int32_t)0x00FF0000) | \
+ (((int32_t)(v0) << 24) & (int32_t)0xFF000000) )
+
+#endif
+
+
+ /**
+ * @brief Clips Q63 to Q31 values.
+ */
+ static __INLINE q31_t clip_q63_to_q31(
+ q63_t x)
+ {
+ return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
+ ((0x7FFFFFFF ^ ((q31_t) (x >> 63)))) : (q31_t) x;
+ }
+
+ /**
+ * @brief Clips Q63 to Q15 values.
+ */
+ static __INLINE q15_t clip_q63_to_q15(
+ q63_t x)
+ {
+ return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
+ ((0x7FFF ^ ((q15_t) (x >> 63)))) : (q15_t) (x >> 15);
+ }
+
+ /**
+ * @brief Clips Q31 to Q7 values.
+ */
+ static __INLINE q7_t clip_q31_to_q7(
+ q31_t x)
+ {
+ return ((q31_t) (x >> 24) != ((q31_t) x >> 23)) ?
+ ((0x7F ^ ((q7_t) (x >> 31)))) : (q7_t) x;
+ }
+
+ /**
+ * @brief Clips Q31 to Q15 values.
+ */
+ static __INLINE q15_t clip_q31_to_q15(
+ q31_t x)
+ {
+ return ((q31_t) (x >> 16) != ((q31_t) x >> 15)) ?
+ ((0x7FFF ^ ((q15_t) (x >> 31)))) : (q15_t) x;
+ }
+
+ /**
+ * @brief Multiplies 32 X 64 and returns 32 bit result in 2.30 format.
+ */
+
+ static __INLINE q63_t mult32x64(
+ q63_t x,
+ q31_t y)
+ {
+ return ((((q63_t) (x & 0x00000000FFFFFFFF) * y) >> 32) +
+ (((q63_t) (x >> 32) * y)));
+ }
+
+/*
+ #if defined (ARM_MATH_CM0_FAMILY) && defined ( __CC_ARM )
+ #define __CLZ __clz
+ #endif
+ */
+/* note: function can be removed when all toolchain support __CLZ for Cortex-M0 */
+#if defined (ARM_MATH_CM0_FAMILY) && ((defined (__ICCARM__)) )
+ static __INLINE uint32_t __CLZ(
+ q31_t data);
+
+ static __INLINE uint32_t __CLZ(
+ q31_t data)
+ {
+ uint32_t count = 0;
+ uint32_t mask = 0x80000000;
+
+ while((data & mask) == 0)
+ {
+ count += 1u;
+ mask = mask >> 1u;
+ }
+
+ return (count);
+ }
+#endif
+
+ /**
+ * @brief Function to Calculates 1/in (reciprocal) value of Q31 Data type.
+ */
+
+ static __INLINE uint32_t arm_recip_q31(
+ q31_t in,
+ q31_t * dst,
+ q31_t * pRecipTable)
+ {
+ q31_t out;
+ uint32_t tempVal;
+ uint32_t index, i;
+ uint32_t signBits;
+
+ if(in > 0)
+ {
+ signBits = ((uint32_t) (__CLZ( in) - 1));
+ }
+ else
+ {
+ signBits = ((uint32_t) (__CLZ(-in) - 1));
+ }
+
+ /* Convert input sample to 1.31 format */
+ in = (in << signBits);
+
+ /* calculation of index for initial approximated Val */
+ index = (uint32_t)(in >> 24);
+ index = (index & INDEX_MASK);
+
+ /* 1.31 with exp 1 */
+ out = pRecipTable[index];
+
+ /* calculation of reciprocal value */
+ /* running approximation for two iterations */
+ for (i = 0u; i < 2u; i++)
+ {
+ tempVal = (uint32_t) (((q63_t) in * out) >> 31);
+ tempVal = 0x7FFFFFFFu - tempVal;
+ /* 1.31 with exp 1 */
+ /* out = (q31_t) (((q63_t) out * tempVal) >> 30); */
+ out = clip_q63_to_q31(((q63_t) out * tempVal) >> 30);
+ }
+
+ /* write output */
+ *dst = out;
+
+ /* return num of signbits of out = 1/in value */
+ return (signBits + 1u);
+ }
+
+
+ /**
+ * @brief Function to Calculates 1/in (reciprocal) value of Q15 Data type.
+ */
+ static __INLINE uint32_t arm_recip_q15(
+ q15_t in,
+ q15_t * dst,
+ q15_t * pRecipTable)
+ {
+ q15_t out = 0;
+ uint32_t tempVal = 0;
+ uint32_t index = 0, i = 0;
+ uint32_t signBits = 0;
+
+ if(in > 0)
+ {
+ signBits = ((uint32_t)(__CLZ( in) - 17));
+ }
+ else
+ {
+ signBits = ((uint32_t)(__CLZ(-in) - 17));
+ }
+
+ /* Convert input sample to 1.15 format */
+ in = (in << signBits);
+
+ /* calculation of index for initial approximated Val */
+ index = (uint32_t)(in >> 8);
+ index = (index & INDEX_MASK);
+
+ /* 1.15 with exp 1 */
+ out = pRecipTable[index];
+
+ /* calculation of reciprocal value */
+ /* running approximation for two iterations */
+ for (i = 0u; i < 2u; i++)
+ {
+ tempVal = (uint32_t) (((q31_t) in * out) >> 15);
+ tempVal = 0x7FFFu - tempVal;
+ /* 1.15 with exp 1 */
+ out = (q15_t) (((q31_t) out * tempVal) >> 14);
+ /* out = clip_q31_to_q15(((q31_t) out * tempVal) >> 14); */
+ }
+
+ /* write output */
+ *dst = out;
+
+ /* return num of signbits of out = 1/in value */
+ return (signBits + 1);
+ }
+
+
+ /*
+ * @brief C custom defined intrinisic function for only M0 processors
+ */
+#if defined(ARM_MATH_CM0_FAMILY)
+ static __INLINE q31_t __SSAT(
+ q31_t x,
+ uint32_t y)
+ {
+ int32_t posMax, negMin;
+ uint32_t i;
+
+ posMax = 1;
+ for (i = 0; i < (y - 1); i++)
+ {
+ posMax = posMax * 2;
+ }
+
+ if(x > 0)
+ {
+ posMax = (posMax - 1);
+
+ if(x > posMax)
+ {
+ x = posMax;
+ }
+ }
+ else
+ {
+ negMin = -posMax;
+
+ if(x < negMin)
+ {
+ x = negMin;
+ }
+ }
+ return (x);
+ }
+#endif /* end of ARM_MATH_CM0_FAMILY */
+
+
+ /*
+ * @brief C custom defined intrinsic function for M3 and M0 processors
+ */
+#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
+
+ /*
+ * @brief C custom defined QADD8 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QADD8(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s, t, u;
+
+ r = __SSAT(((((q31_t)x << 24) >> 24) + (((q31_t)y << 24) >> 24)), 8) & (int32_t)0x000000FF;
+ s = __SSAT(((((q31_t)x << 16) >> 24) + (((q31_t)y << 16) >> 24)), 8) & (int32_t)0x000000FF;
+ t = __SSAT(((((q31_t)x << 8) >> 24) + (((q31_t)y << 8) >> 24)), 8) & (int32_t)0x000000FF;
+ u = __SSAT(((((q31_t)x ) >> 24) + (((q31_t)y ) >> 24)), 8) & (int32_t)0x000000FF;
+
+ return ((uint32_t)((u << 24) | (t << 16) | (s << 8) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QSUB8 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QSUB8(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s, t, u;
+
+ r = __SSAT(((((q31_t)x << 24) >> 24) - (((q31_t)y << 24) >> 24)), 8) & (int32_t)0x000000FF;
+ s = __SSAT(((((q31_t)x << 16) >> 24) - (((q31_t)y << 16) >> 24)), 8) & (int32_t)0x000000FF;
+ t = __SSAT(((((q31_t)x << 8) >> 24) - (((q31_t)y << 8) >> 24)), 8) & (int32_t)0x000000FF;
+ u = __SSAT(((((q31_t)x ) >> 24) - (((q31_t)y ) >> 24)), 8) & (int32_t)0x000000FF;
+
+ return ((uint32_t)((u << 24) | (t << 16) | (s << 8) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QADD16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QADD16(
+ uint32_t x,
+ uint32_t y)
+ {
+/* q31_t r, s; without initialisation 'arm_offset_q15 test' fails but 'intrinsic' tests pass! for armCC */
+ q31_t r = 0, s = 0;
+
+ r = __SSAT(((((q31_t)x << 16) >> 16) + (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
+ s = __SSAT(((((q31_t)x ) >> 16) + (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SHADD16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SHADD16(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = (((((q31_t)x << 16) >> 16) + (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+ s = (((((q31_t)x ) >> 16) + (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QSUB16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QSUB16(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = __SSAT(((((q31_t)x << 16) >> 16) - (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
+ s = __SSAT(((((q31_t)x ) >> 16) - (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SHSUB16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SHSUB16(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = (((((q31_t)x << 16) >> 16) - (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+ s = (((((q31_t)x ) >> 16) - (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QASX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QASX(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = __SSAT(((((q31_t)x << 16) >> 16) - (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
+ s = __SSAT(((((q31_t)x ) >> 16) + (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SHASX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SHASX(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = (((((q31_t)x << 16) >> 16) - (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+ s = (((((q31_t)x ) >> 16) + (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QSAX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QSAX(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = __SSAT(((((q31_t)x << 16) >> 16) + (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
+ s = __SSAT(((((q31_t)x ) >> 16) - (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SHSAX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SHSAX(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = (((((q31_t)x << 16) >> 16) + (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+ s = (((((q31_t)x ) >> 16) - (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SMUSDX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMUSDX(
+ uint32_t x,
+ uint32_t y)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) -
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) ));
+ }
+
+ /*
+ * @brief C custom defined SMUADX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMUADX(
+ uint32_t x,
+ uint32_t y)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) ));
+ }
+
+
+ /*
+ * @brief C custom defined QADD for M3 and M0 processors
+ */
+ static __INLINE int32_t __QADD(
+ int32_t x,
+ int32_t y)
+ {
+ return ((int32_t)(clip_q63_to_q31((q63_t)x + (q31_t)y)));
+ }
+
+
+ /*
+ * @brief C custom defined QSUB for M3 and M0 processors
+ */
+ static __INLINE int32_t __QSUB(
+ int32_t x,
+ int32_t y)
+ {
+ return ((int32_t)(clip_q63_to_q31((q63_t)x - (q31_t)y)));
+ }
+
+
+ /*
+ * @brief C custom defined SMLAD for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMLAD(
+ uint32_t x,
+ uint32_t y,
+ uint32_t sum)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) +
+ ( ((q31_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMLADX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMLADX(
+ uint32_t x,
+ uint32_t y,
+ uint32_t sum)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ( ((q31_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMLSDX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMLSDX(
+ uint32_t x,
+ uint32_t y,
+ uint32_t sum)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) -
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ( ((q31_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMLALD for M3 and M0 processors
+ */
+ static __INLINE uint64_t __SMLALD(
+ uint32_t x,
+ uint32_t y,
+ uint64_t sum)
+ {
+/* return (sum + ((q15_t) (x >> 16) * (q15_t) (y >> 16)) + ((q15_t) x * (q15_t) y)); */
+ return ((uint64_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) +
+ ( ((q63_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMLALDX for M3 and M0 processors
+ */
+ static __INLINE uint64_t __SMLALDX(
+ uint32_t x,
+ uint32_t y,
+ uint64_t sum)
+ {
+/* return (sum + ((q15_t) (x >> 16) * (q15_t) y)) + ((q15_t) x * (q15_t) (y >> 16)); */
+ return ((uint64_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ( ((q63_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMUAD for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMUAD(
+ uint32_t x,
+ uint32_t y)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMUSD for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMUSD(
+ uint32_t x,
+ uint32_t y)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) -
+ ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) ));
+ }
+
+
+ /*
+ * @brief C custom defined SXTB16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SXTB16(
+ uint32_t x)
+ {
+ return ((uint32_t)(((((q31_t)x << 24) >> 24) & (q31_t)0x0000FFFF) |
+ ((((q31_t)x << 8) >> 8) & (q31_t)0xFFFF0000) ));
+ }
+
+#endif /* defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) */
+
+
+ /**
+ * @brief Instance structure for the Q7 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q7_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ } arm_fir_instance_q7;
+
+ /**
+ * @brief Instance structure for the Q15 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ } arm_fir_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ } arm_fir_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ } arm_fir_instance_f32;
+
+
+ /**
+ * @brief Processing function for the Q7 FIR filter.
+ * @param[in] S points to an instance of the Q7 FIR filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_q7(
+ const arm_fir_instance_q7 * S,
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q7 FIR filter.
+ * @param[in,out] S points to an instance of the Q7 FIR structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed.
+ */
+ void arm_fir_init_q7(
+ arm_fir_instance_q7 * S,
+ uint16_t numTaps,
+ q7_t * pCoeffs,
+ q7_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR filter.
+ * @param[in] S points to an instance of the Q15 FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_q15(
+ const arm_fir_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the fast Q15 FIR filter for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q15 FIR filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_fast_q15(
+ const arm_fir_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR filter.
+ * @param[in,out] S points to an instance of the Q15 FIR filter structure.
+ * @param[in] numTaps Number of filter coefficients in the filter. Must be even and greater than or equal to 4.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ * @return The function returns ARM_MATH_SUCCESS if initialization was successful or ARM_MATH_ARGUMENT_ERROR if
+ * numTaps is not a supported value.
+ */
+ arm_status arm_fir_init_q15(
+ arm_fir_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 FIR filter.
+ * @param[in] S points to an instance of the Q31 FIR filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_q31(
+ const arm_fir_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the fast Q31 FIR filter for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q31 FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_fast_q31(
+ const arm_fir_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 FIR filter.
+ * @param[in,out] S points to an instance of the Q31 FIR structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ */
+ void arm_fir_init_q31(
+ arm_fir_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point FIR filter.
+ * @param[in] S points to an instance of the floating-point FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_f32(
+ const arm_fir_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point FIR filter.
+ * @param[in,out] S points to an instance of the floating-point FIR filter structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ */
+ void arm_fir_init_f32(
+ arm_fir_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 Biquad cascade filter.
+ */
+ typedef struct
+ {
+ int8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q15_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ q15_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+ int8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
+ } arm_biquad_casd_df1_inst_q15;
+
+ /**
+ * @brief Instance structure for the Q31 Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q31_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ q31_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+ uint8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
+ } arm_biquad_casd_df1_inst_q31;
+
+ /**
+ * @brief Instance structure for the floating-point Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ float32_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_casd_df1_inst_f32;
+
+
+ /**
+ * @brief Processing function for the Q15 Biquad cascade filter.
+ * @param[in] S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_q15(
+ const arm_biquad_casd_df1_inst_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 Biquad cascade filter.
+ * @param[in,out] S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format
+ */
+ void arm_biquad_cascade_df1_init_q15(
+ arm_biquad_casd_df1_inst_q15 * S,
+ uint8_t numStages,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ int8_t postShift);
+
+
+ /**
+ * @brief Fast but less precise processing function for the Q15 Biquad cascade filter for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_fast_q15(
+ const arm_biquad_casd_df1_inst_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 Biquad cascade filter
+ * @param[in] S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_q31(
+ const arm_biquad_casd_df1_inst_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fast but less precise processing function for the Q31 Biquad cascade filter for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_fast_q31(
+ const arm_biquad_casd_df1_inst_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 Biquad cascade filter.
+ * @param[in,out] S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format
+ */
+ void arm_biquad_cascade_df1_init_q31(
+ arm_biquad_casd_df1_inst_q31 * S,
+ uint8_t numStages,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ int8_t postShift);
+
+
+ /**
+ * @brief Processing function for the floating-point Biquad cascade filter.
+ * @param[in] S points to an instance of the floating-point Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_f32(
+ const arm_biquad_casd_df1_inst_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point Biquad cascade filter.
+ * @param[in,out] S points to an instance of the floating-point Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ */
+ void arm_biquad_cascade_df1_init_f32(
+ arm_biquad_casd_df1_inst_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Instance structure for the floating-point matrix structure.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ float32_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_f32;
+
+
+ /**
+ * @brief Instance structure for the floating-point matrix structure.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ float64_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_f64;
+
+ /**
+ * @brief Instance structure for the Q15 matrix structure.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ q15_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 matrix structure.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ q31_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_q31;
+
+
+ /**
+ * @brief Floating-point matrix addition.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_add_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix addition.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_add_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst);
+
+
+ /**
+ * @brief Q31 matrix addition.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_add_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point, complex, matrix multiplication.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_cmplx_mult_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15, complex, matrix multiplication.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_cmplx_mult_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pScratch);
+
+
+ /**
+ * @brief Q31, complex, matrix multiplication.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_cmplx_mult_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix transpose.
+ * @param[in] pSrc points to the input matrix
+ * @param[out] pDst points to the output matrix
+ * @return The function returns either ARM_MATH_SIZE_MISMATCH
+ * or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_trans_f32(
+ const arm_matrix_instance_f32 * pSrc,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix transpose.
+ * @param[in] pSrc points to the input matrix
+ * @param[out] pDst points to the output matrix
+ * @return The function returns either ARM_MATH_SIZE_MISMATCH
+ * or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_trans_q15(
+ const arm_matrix_instance_q15 * pSrc,
+ arm_matrix_instance_q15 * pDst);
+
+
+ /**
+ * @brief Q31 matrix transpose.
+ * @param[in] pSrc points to the input matrix
+ * @param[out] pDst points to the output matrix
+ * @return The function returns either ARM_MATH_SIZE_MISMATCH
+ * or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_trans_q31(
+ const arm_matrix_instance_q31 * pSrc,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix multiplication
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix multiplication
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @param[in] pState points to the array for storing intermediate results
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pState);
+
+
+ /**
+ * @brief Q15 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @param[in] pState points to the array for storing intermediate results
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_fast_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pState);
+
+
+ /**
+ * @brief Q31 matrix multiplication
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Q31 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_fast_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix subtraction
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_sub_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix subtraction
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_sub_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst);
+
+
+ /**
+ * @brief Q31 matrix subtraction
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_sub_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix scaling.
+ * @param[in] pSrc points to the input matrix
+ * @param[in] scale scale factor
+ * @param[out] pDst points to the output matrix
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_scale_f32(
+ const arm_matrix_instance_f32 * pSrc,
+ float32_t scale,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix scaling.
+ * @param[in] pSrc points to input matrix
+ * @param[in] scaleFract fractional portion of the scale factor
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to output matrix
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_scale_q15(
+ const arm_matrix_instance_q15 * pSrc,
+ q15_t scaleFract,
+ int32_t shift,
+ arm_matrix_instance_q15 * pDst);
+
+
+ /**
+ * @brief Q31 matrix scaling.
+ * @param[in] pSrc points to input matrix
+ * @param[in] scaleFract fractional portion of the scale factor
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_scale_q31(
+ const arm_matrix_instance_q31 * pSrc,
+ q31_t scaleFract,
+ int32_t shift,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Q31 matrix initialization.
+ * @param[in,out] S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] pData points to the matrix data array.
+ */
+ void arm_mat_init_q31(
+ arm_matrix_instance_q31 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ q31_t * pData);
+
+
+ /**
+ * @brief Q15 matrix initialization.
+ * @param[in,out] S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] pData points to the matrix data array.
+ */
+ void arm_mat_init_q15(
+ arm_matrix_instance_q15 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ q15_t * pData);
+
+
+ /**
+ * @brief Floating-point matrix initialization.
+ * @param[in,out] S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] pData points to the matrix data array.
+ */
+ void arm_mat_init_f32(
+ arm_matrix_instance_f32 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ float32_t * pData);
+
+
+
+ /**
+ * @brief Instance structure for the Q15 PID Control.
+ */
+ typedef struct
+ {
+ q15_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+#ifdef ARM_MATH_CM0_FAMILY
+ q15_t A1;
+ q15_t A2;
+#else
+ q31_t A1; /**< The derived gain A1 = -Kp - 2Kd | Kd.*/
+#endif
+ q15_t state[3]; /**< The state array of length 3. */
+ q15_t Kp; /**< The proportional gain. */
+ q15_t Ki; /**< The integral gain. */
+ q15_t Kd; /**< The derivative gain. */
+ } arm_pid_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 PID Control.
+ */
+ typedef struct
+ {
+ q31_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+ q31_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
+ q31_t A2; /**< The derived gain, A2 = Kd . */
+ q31_t state[3]; /**< The state array of length 3. */
+ q31_t Kp; /**< The proportional gain. */
+ q31_t Ki; /**< The integral gain. */
+ q31_t Kd; /**< The derivative gain. */
+ } arm_pid_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point PID Control.
+ */
+ typedef struct
+ {
+ float32_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+ float32_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
+ float32_t A2; /**< The derived gain, A2 = Kd . */
+ float32_t state[3]; /**< The state array of length 3. */
+ float32_t Kp; /**< The proportional gain. */
+ float32_t Ki; /**< The integral gain. */
+ float32_t Kd; /**< The derivative gain. */
+ } arm_pid_instance_f32;
+
+
+
+ /**
+ * @brief Initialization function for the floating-point PID Control.
+ * @param[in,out] S points to an instance of the PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ */
+ void arm_pid_init_f32(
+ arm_pid_instance_f32 * S,
+ int32_t resetStateFlag);
+
+
+ /**
+ * @brief Reset function for the floating-point PID Control.
+ * @param[in,out] S is an instance of the floating-point PID Control structure
+ */
+ void arm_pid_reset_f32(
+ arm_pid_instance_f32 * S);
+
+
+ /**
+ * @brief Initialization function for the Q31 PID Control.
+ * @param[in,out] S points to an instance of the Q15 PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ */
+ void arm_pid_init_q31(
+ arm_pid_instance_q31 * S,
+ int32_t resetStateFlag);
+
+
+ /**
+ * @brief Reset function for the Q31 PID Control.
+ * @param[in,out] S points to an instance of the Q31 PID Control structure
+ */
+
+ void arm_pid_reset_q31(
+ arm_pid_instance_q31 * S);
+
+
+ /**
+ * @brief Initialization function for the Q15 PID Control.
+ * @param[in,out] S points to an instance of the Q15 PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ */
+ void arm_pid_init_q15(
+ arm_pid_instance_q15 * S,
+ int32_t resetStateFlag);
+
+
+ /**
+ * @brief Reset function for the Q15 PID Control.
+ * @param[in,out] S points to an instance of the q15 PID Control structure
+ */
+ void arm_pid_reset_q15(
+ arm_pid_instance_q15 * S);
+
+
+ /**
+ * @brief Instance structure for the floating-point Linear Interpolate function.
+ */
+ typedef struct
+ {
+ uint32_t nValues; /**< nValues */
+ float32_t x1; /**< x1 */
+ float32_t xSpacing; /**< xSpacing */
+ float32_t *pYData; /**< pointer to the table of Y values */
+ } arm_linear_interp_instance_f32;
+
+ /**
+ * @brief Instance structure for the floating-point bilinear interpolation function.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ float32_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_f32;
+
+ /**
+ * @brief Instance structure for the Q31 bilinear interpolation function.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q31_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q31;
+
+ /**
+ * @brief Instance structure for the Q15 bilinear interpolation function.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q15_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q15 bilinear interpolation function.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q7_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q7;
+
+
+ /**
+ * @brief Q7 vector multiplication.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_mult_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q15 vector multiplication.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_mult_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q31 vector multiplication.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_mult_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Floating-point vector multiplication.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_mult_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q15_t *pTwiddle; /**< points to the Sin twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix2_instance_q15;
+
+/* Deprecated */
+ arm_status arm_cfft_radix2_init_q15(
+ arm_cfft_radix2_instance_q15 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix2_q15(
+ const arm_cfft_radix2_instance_q15 * S,
+ q15_t * pSrc);
+
+
+ /**
+ * @brief Instance structure for the Q15 CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q15_t *pTwiddle; /**< points to the twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix4_instance_q15;
+
+/* Deprecated */
+ arm_status arm_cfft_radix4_init_q15(
+ arm_cfft_radix4_instance_q15 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix4_q15(
+ const arm_cfft_radix4_instance_q15 * S,
+ q15_t * pSrc);
+
+ /**
+ * @brief Instance structure for the Radix-2 Q31 CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q31_t *pTwiddle; /**< points to the Twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix2_instance_q31;
+
+/* Deprecated */
+ arm_status arm_cfft_radix2_init_q31(
+ arm_cfft_radix2_instance_q31 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix2_q31(
+ const arm_cfft_radix2_instance_q31 * S,
+ q31_t * pSrc);
+
+ /**
+ * @brief Instance structure for the Q31 CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q31_t *pTwiddle; /**< points to the twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix4_instance_q31;
+
+/* Deprecated */
+ void arm_cfft_radix4_q31(
+ const arm_cfft_radix4_instance_q31 * S,
+ q31_t * pSrc);
+
+/* Deprecated */
+ arm_status arm_cfft_radix4_init_q31(
+ arm_cfft_radix4_instance_q31 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the floating-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ float32_t *pTwiddle; /**< points to the Twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ float32_t onebyfftLen; /**< value of 1/fftLen. */
+ } arm_cfft_radix2_instance_f32;
+
+/* Deprecated */
+ arm_status arm_cfft_radix2_init_f32(
+ arm_cfft_radix2_instance_f32 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix2_f32(
+ const arm_cfft_radix2_instance_f32 * S,
+ float32_t * pSrc);
+
+ /**
+ * @brief Instance structure for the floating-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ float32_t *pTwiddle; /**< points to the Twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ float32_t onebyfftLen; /**< value of 1/fftLen. */
+ } arm_cfft_radix4_instance_f32;
+
+/* Deprecated */
+ arm_status arm_cfft_radix4_init_f32(
+ arm_cfft_radix4_instance_f32 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix4_f32(
+ const arm_cfft_radix4_instance_f32 * S,
+ float32_t * pSrc);
+
+ /**
+ * @brief Instance structure for the fixed-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ const q15_t *pTwiddle; /**< points to the Twiddle factor table. */
+ const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t bitRevLength; /**< bit reversal table length. */
+ } arm_cfft_instance_q15;
+
+void arm_cfft_q15(
+ const arm_cfft_instance_q15 * S,
+ q15_t * p1,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the fixed-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ const q31_t *pTwiddle; /**< points to the Twiddle factor table. */
+ const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t bitRevLength; /**< bit reversal table length. */
+ } arm_cfft_instance_q31;
+
+void arm_cfft_q31(
+ const arm_cfft_instance_q31 * S,
+ q31_t * p1,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the floating-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ const float32_t *pTwiddle; /**< points to the Twiddle factor table. */
+ const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t bitRevLength; /**< bit reversal table length. */
+ } arm_cfft_instance_f32;
+
+ void arm_cfft_f32(
+ const arm_cfft_instance_f32 * S,
+ float32_t * p1,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the Q15 RFFT/RIFFT function.
+ */
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ q15_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ q15_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ const arm_cfft_instance_q15 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_q15;
+
+ arm_status arm_rfft_init_q15(
+ arm_rfft_instance_q15 * S,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ void arm_rfft_q15(
+ const arm_rfft_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst);
+
+ /**
+ * @brief Instance structure for the Q31 RFFT/RIFFT function.
+ */
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ q31_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ q31_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ const arm_cfft_instance_q31 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_q31;
+
+ arm_status arm_rfft_init_q31(
+ arm_rfft_instance_q31 * S,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ void arm_rfft_q31(
+ const arm_rfft_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst);
+
+ /**
+ * @brief Instance structure for the floating-point RFFT/RIFFT function.
+ */
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint16_t fftLenBy2; /**< length of the complex FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ float32_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ float32_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_f32;
+
+ arm_status arm_rfft_init_f32(
+ arm_rfft_instance_f32 * S,
+ arm_cfft_radix4_instance_f32 * S_CFFT,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ void arm_rfft_f32(
+ const arm_rfft_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst);
+
+ /**
+ * @brief Instance structure for the floating-point RFFT/RIFFT function.
+ */
+typedef struct
+ {
+ arm_cfft_instance_f32 Sint; /**< Internal CFFT structure. */
+ uint16_t fftLenRFFT; /**< length of the real sequence */
+ float32_t * pTwiddleRFFT; /**< Twiddle factors real stage */
+ } arm_rfft_fast_instance_f32 ;
+
+arm_status arm_rfft_fast_init_f32 (
+ arm_rfft_fast_instance_f32 * S,
+ uint16_t fftLen);
+
+void arm_rfft_fast_f32(
+ arm_rfft_fast_instance_f32 * S,
+ float32_t * p, float32_t * pOut,
+ uint8_t ifftFlag);
+
+ /**
+ * @brief Instance structure for the floating-point DCT4/IDCT4 function.
+ */
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ float32_t normalize; /**< normalizing factor. */
+ float32_t *pTwiddle; /**< points to the twiddle factor table. */
+ float32_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_f32 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_f32;
+
+
+ /**
+ * @brief Initialization function for the floating-point DCT4/IDCT4.
+ * @param[in,out] S points to an instance of floating-point DCT4/IDCT4 structure.
+ * @param[in] S_RFFT points to an instance of floating-point RFFT/RIFFT structure.
+ * @param[in] S_CFFT points to an instance of floating-point CFFT/CIFFT structure.
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if fftLenReal is not a supported transform length.
+ */
+ arm_status arm_dct4_init_f32(
+ arm_dct4_instance_f32 * S,
+ arm_rfft_instance_f32 * S_RFFT,
+ arm_cfft_radix4_instance_f32 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ float32_t normalize);
+
+
+ /**
+ * @brief Processing function for the floating-point DCT4/IDCT4.
+ * @param[in] S points to an instance of the floating-point DCT4/IDCT4 structure.
+ * @param[in] pState points to state buffer.
+ * @param[in,out] pInlineBuffer points to the in-place input and output buffer.
+ */
+ void arm_dct4_f32(
+ const arm_dct4_instance_f32 * S,
+ float32_t * pState,
+ float32_t * pInlineBuffer);
+
+
+ /**
+ * @brief Instance structure for the Q31 DCT4/IDCT4 function.
+ */
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ q31_t normalize; /**< normalizing factor. */
+ q31_t *pTwiddle; /**< points to the twiddle factor table. */
+ q31_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_q31 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_q31;
+
+
+ /**
+ * @brief Initialization function for the Q31 DCT4/IDCT4.
+ * @param[in,out] S points to an instance of Q31 DCT4/IDCT4 structure.
+ * @param[in] S_RFFT points to an instance of Q31 RFFT/RIFFT structure
+ * @param[in] S_CFFT points to an instance of Q31 CFFT/CIFFT structure
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N is not a supported transform length.
+ */
+ arm_status arm_dct4_init_q31(
+ arm_dct4_instance_q31 * S,
+ arm_rfft_instance_q31 * S_RFFT,
+ arm_cfft_radix4_instance_q31 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ q31_t normalize);
+
+
+ /**
+ * @brief Processing function for the Q31 DCT4/IDCT4.
+ * @param[in] S points to an instance of the Q31 DCT4 structure.
+ * @param[in] pState points to state buffer.
+ * @param[in,out] pInlineBuffer points to the in-place input and output buffer.
+ */
+ void arm_dct4_q31(
+ const arm_dct4_instance_q31 * S,
+ q31_t * pState,
+ q31_t * pInlineBuffer);
+
+
+ /**
+ * @brief Instance structure for the Q15 DCT4/IDCT4 function.
+ */
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ q15_t normalize; /**< normalizing factor. */
+ q15_t *pTwiddle; /**< points to the twiddle factor table. */
+ q15_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_q15 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_q15;
+
+
+ /**
+ * @brief Initialization function for the Q15 DCT4/IDCT4.
+ * @param[in,out] S points to an instance of Q15 DCT4/IDCT4 structure.
+ * @param[in] S_RFFT points to an instance of Q15 RFFT/RIFFT structure.
+ * @param[in] S_CFFT points to an instance of Q15 CFFT/CIFFT structure.
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N is not a supported transform length.
+ */
+ arm_status arm_dct4_init_q15(
+ arm_dct4_instance_q15 * S,
+ arm_rfft_instance_q15 * S_RFFT,
+ arm_cfft_radix4_instance_q15 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ q15_t normalize);
+
+
+ /**
+ * @brief Processing function for the Q15 DCT4/IDCT4.
+ * @param[in] S points to an instance of the Q15 DCT4 structure.
+ * @param[in] pState points to state buffer.
+ * @param[in,out] pInlineBuffer points to the in-place input and output buffer.
+ */
+ void arm_dct4_q15(
+ const arm_dct4_instance_q15 * S,
+ q15_t * pState,
+ q15_t * pInlineBuffer);
+
+
+ /**
+ * @brief Floating-point vector addition.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_add_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q7 vector addition.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_add_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q15 vector addition.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_add_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q31 vector addition.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_add_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Floating-point vector subtraction.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_sub_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q7 vector subtraction.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_sub_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q15 vector subtraction.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_sub_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q31 vector subtraction.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_sub_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Multiplies a floating-point vector by a scalar.
+ * @param[in] pSrc points to the input vector
+ * @param[in] scale scale factor to be applied
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_scale_f32(
+ float32_t * pSrc,
+ float32_t scale,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Multiplies a Q7 vector by a scalar.
+ * @param[in] pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_scale_q7(
+ q7_t * pSrc,
+ q7_t scaleFract,
+ int8_t shift,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Multiplies a Q15 vector by a scalar.
+ * @param[in] pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_scale_q15(
+ q15_t * pSrc,
+ q15_t scaleFract,
+ int8_t shift,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Multiplies a Q31 vector by a scalar.
+ * @param[in] pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_scale_q31(
+ q31_t * pSrc,
+ q31_t scaleFract,
+ int8_t shift,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q7 vector absolute value.
+ * @param[in] pSrc points to the input buffer
+ * @param[out] pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_abs_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Floating-point vector absolute value.
+ * @param[in] pSrc points to the input buffer
+ * @param[out] pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_abs_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q15 vector absolute value.
+ * @param[in] pSrc points to the input buffer
+ * @param[out] pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_abs_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q31 vector absolute value.
+ * @param[in] pSrc points to the input buffer
+ * @param[out] pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_abs_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Dot product of floating-point vectors.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] result output result returned here
+ */
+ void arm_dot_prod_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ uint32_t blockSize,
+ float32_t * result);
+
+
+ /**
+ * @brief Dot product of Q7 vectors.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] result output result returned here
+ */
+ void arm_dot_prod_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ uint32_t blockSize,
+ q31_t * result);
+
+
+ /**
+ * @brief Dot product of Q15 vectors.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] result output result returned here
+ */
+ void arm_dot_prod_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ uint32_t blockSize,
+ q63_t * result);
+
+
+ /**
+ * @brief Dot product of Q31 vectors.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] result output result returned here
+ */
+ void arm_dot_prod_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ uint32_t blockSize,
+ q63_t * result);
+
+
+ /**
+ * @brief Shifts the elements of a Q7 vector a specified number of bits.
+ * @param[in] pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_shift_q7(
+ q7_t * pSrc,
+ int8_t shiftBits,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Shifts the elements of a Q15 vector a specified number of bits.
+ * @param[in] pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_shift_q15(
+ q15_t * pSrc,
+ int8_t shiftBits,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Shifts the elements of a Q31 vector a specified number of bits.
+ * @param[in] pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_shift_q31(
+ q31_t * pSrc,
+ int8_t shiftBits,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Adds a constant offset to a floating-point vector.
+ * @param[in] pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_offset_f32(
+ float32_t * pSrc,
+ float32_t offset,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Adds a constant offset to a Q7 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_offset_q7(
+ q7_t * pSrc,
+ q7_t offset,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Adds a constant offset to a Q15 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_offset_q15(
+ q15_t * pSrc,
+ q15_t offset,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Adds a constant offset to a Q31 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_offset_q31(
+ q31_t * pSrc,
+ q31_t offset,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Negates the elements of a floating-point vector.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_negate_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Negates the elements of a Q7 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_negate_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Negates the elements of a Q15 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_negate_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Negates the elements of a Q31 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_negate_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Copies the elements of a floating-point vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_copy_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Copies the elements of a Q7 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_copy_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Copies the elements of a Q15 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_copy_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Copies the elements of a Q31 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_copy_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fills a constant value into a floating-point vector.
+ * @param[in] value input value to be filled
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_fill_f32(
+ float32_t value,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fills a constant value into a Q7 vector.
+ * @param[in] value input value to be filled
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_fill_q7(
+ q7_t value,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fills a constant value into a Q15 vector.
+ * @param[in] value input value to be filled
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_fill_q15(
+ q15_t value,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fills a constant value into a Q31 vector.
+ * @param[in] value input value to be filled
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_fill_q31(
+ q31_t value,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+/**
+ * @brief Convolution of floating-point sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the location where the output result is written. Length srcALen+srcBLen-1.
+ */
+ void arm_conv_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ */
+ void arm_conv_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+/**
+ * @brief Convolution of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the location where the output result is written. Length srcALen+srcBLen-1.
+ */
+ void arm_conv_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ */
+ void arm_conv_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ */
+ void arm_conv_fast_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Convolution of Q31 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ */
+ void arm_conv_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ */
+ void arm_conv_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+ */
+ void arm_conv_opt_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Convolution of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ */
+ void arm_conv_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst);
+
+
+ /**
+ * @brief Partial convolution of floating-point sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Partial convolution of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_fast_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Partial convolution of Q31 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q7 sequences
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_opt_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+/**
+ * @brief Partial convolution of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR decimator.
+ */
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ } arm_fir_decimate_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR decimator.
+ */
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ } arm_fir_decimate_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR decimator.
+ */
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ } arm_fir_decimate_instance_f32;
+
+
+ /**
+ * @brief Processing function for the floating-point FIR decimator.
+ * @param[in] S points to an instance of the floating-point FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_f32(
+ const arm_fir_decimate_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point FIR decimator.
+ * @param[in,out] S points to an instance of the floating-point FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * blockSize is not a multiple of M.
+ */
+ arm_status arm_fir_decimate_init_f32(
+ arm_fir_decimate_instance_f32 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR decimator.
+ * @param[in] S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_q15(
+ const arm_fir_decimate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_fast_q15(
+ const arm_fir_decimate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR decimator.
+ * @param[in,out] S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * blockSize is not a multiple of M.
+ */
+ arm_status arm_fir_decimate_init_q15(
+ arm_fir_decimate_instance_q15 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 FIR decimator.
+ * @param[in] S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_q31(
+ const arm_fir_decimate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q31 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_fast_q31(
+ arm_fir_decimate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 FIR decimator.
+ * @param[in,out] S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * blockSize is not a multiple of M.
+ */
+ arm_status arm_fir_decimate_init_q31(
+ arm_fir_decimate_instance_q31 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR interpolator.
+ */
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ q15_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
+ } arm_fir_interpolate_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR interpolator.
+ */
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ q31_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
+ } arm_fir_interpolate_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR interpolator.
+ */
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ float32_t *pState; /**< points to the state variable array. The array is of length phaseLength+numTaps-1. */
+ } arm_fir_interpolate_instance_f32;
+
+
+ /**
+ * @brief Processing function for the Q15 FIR interpolator.
+ * @param[in] S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_interpolate_q15(
+ const arm_fir_interpolate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR interpolator.
+ * @param[in,out] S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficient buffer.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length numTaps is not a multiple of the interpolation factor L.
+ */
+ arm_status arm_fir_interpolate_init_q15(
+ arm_fir_interpolate_instance_q15 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 FIR interpolator.
+ * @param[in] S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_interpolate_q31(
+ const arm_fir_interpolate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 FIR interpolator.
+ * @param[in,out] S points to an instance of the Q31 FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficient buffer.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length numTaps is not a multiple of the interpolation factor L.
+ */
+ arm_status arm_fir_interpolate_init_q31(
+ arm_fir_interpolate_instance_q31 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point FIR interpolator.
+ * @param[in] S points to an instance of the floating-point FIR interpolator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_interpolate_f32(
+ const arm_fir_interpolate_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point FIR interpolator.
+ * @param[in,out] S points to an instance of the floating-point FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficient buffer.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length numTaps is not a multiple of the interpolation factor L.
+ */
+ arm_status arm_fir_interpolate_init_f32(
+ arm_fir_interpolate_instance_f32 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the high precision Q31 Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q63_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */
+ q31_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ uint8_t postShift; /**< additional shift, in bits, applied to each output sample. */
+ } arm_biquad_cas_df1_32x64_ins_q31;
+
+
+ /**
+ * @param[in] S points to an instance of the high precision Q31 Biquad cascade filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cas_df1_32x64_q31(
+ const arm_biquad_cas_df1_32x64_ins_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @param[in,out] S points to an instance of the high precision Q31 Biquad cascade filter structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] postShift shift to be applied to the output. Varies according to the coefficients format
+ */
+ void arm_biquad_cas_df1_32x64_init_q31(
+ arm_biquad_cas_df1_32x64_ins_q31 * S,
+ uint8_t numStages,
+ q31_t * pCoeffs,
+ q63_t * pState,
+ uint8_t postShift);
+
+
+ /**
+ * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */
+ float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_cascade_df2T_instance_f32;
+
+ /**
+ * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */
+ float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_cascade_stereo_df2T_instance_f32;
+
+ /**
+ * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float64_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */
+ float64_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_cascade_df2T_instance_f64;
+
+
+ /**
+ * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in] S points to an instance of the filter data structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df2T_f32(
+ const arm_biquad_cascade_df2T_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. 2 channels
+ * @param[in] S points to an instance of the filter data structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_stereo_df2T_f32(
+ const arm_biquad_cascade_stereo_df2T_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in] S points to an instance of the filter data structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df2T_f64(
+ const arm_biquad_cascade_df2T_instance_f64 * S,
+ float64_t * pSrc,
+ float64_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in,out] S points to an instance of the filter data structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ */
+ void arm_biquad_cascade_df2T_init_f32(
+ arm_biquad_cascade_df2T_instance_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in,out] S points to an instance of the filter data structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ */
+ void arm_biquad_cascade_stereo_df2T_init_f32(
+ arm_biquad_cascade_stereo_df2T_instance_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in,out] S points to an instance of the filter data structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ */
+ void arm_biquad_cascade_df2T_init_f64(
+ arm_biquad_cascade_df2T_instance_f64 * S,
+ uint8_t numStages,
+ float64_t * pCoeffs,
+ float64_t * pState);
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_f32;
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR lattice filter.
+ * @param[in] S points to an instance of the Q15 FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] pState points to the state buffer. The array is of length numStages.
+ */
+ void arm_fir_lattice_init_q15(
+ arm_fir_lattice_instance_q15 * S,
+ uint16_t numStages,
+ q15_t * pCoeffs,
+ q15_t * pState);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR lattice filter.
+ * @param[in] S points to an instance of the Q15 FIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_lattice_q15(
+ const arm_fir_lattice_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 FIR lattice filter.
+ * @param[in] S points to an instance of the Q31 FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] pState points to the state buffer. The array is of length numStages.
+ */
+ void arm_fir_lattice_init_q31(
+ arm_fir_lattice_instance_q31 * S,
+ uint16_t numStages,
+ q31_t * pCoeffs,
+ q31_t * pState);
+
+
+ /**
+ * @brief Processing function for the Q31 FIR lattice filter.
+ * @param[in] S points to an instance of the Q31 FIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_lattice_q31(
+ const arm_fir_lattice_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+/**
+ * @brief Initialization function for the floating-point FIR lattice filter.
+ * @param[in] S points to an instance of the floating-point FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] pState points to the state buffer. The array is of length numStages.
+ */
+ void arm_fir_lattice_init_f32(
+ arm_fir_lattice_instance_f32 * S,
+ uint16_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Processing function for the floating-point FIR lattice filter.
+ * @param[in] S points to an instance of the floating-point FIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_lattice_f32(
+ const arm_fir_lattice_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ q15_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ q15_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ q31_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ q31_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ float32_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ float32_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_f32;
+
+
+ /**
+ * @brief Processing function for the floating-point IIR lattice filter.
+ * @param[in] S points to an instance of the floating-point IIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_f32(
+ const arm_iir_lattice_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point IIR lattice filter.
+ * @param[in] S points to an instance of the floating-point IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] pkCoeffs points to the reflection coefficient buffer. The array is of length numStages.
+ * @param[in] pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] pState points to the state buffer. The array is of length numStages+blockSize-1.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_init_f32(
+ arm_iir_lattice_instance_f32 * S,
+ uint16_t numStages,
+ float32_t * pkCoeffs,
+ float32_t * pvCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 IIR lattice filter.
+ * @param[in] S points to an instance of the Q31 IIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_q31(
+ const arm_iir_lattice_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 IIR lattice filter.
+ * @param[in] S points to an instance of the Q31 IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] pkCoeffs points to the reflection coefficient buffer. The array is of length numStages.
+ * @param[in] pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] pState points to the state buffer. The array is of length numStages+blockSize.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_init_q31(
+ arm_iir_lattice_instance_q31 * S,
+ uint16_t numStages,
+ q31_t * pkCoeffs,
+ q31_t * pvCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 IIR lattice filter.
+ * @param[in] S points to an instance of the Q15 IIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_q15(
+ const arm_iir_lattice_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+/**
+ * @brief Initialization function for the Q15 IIR lattice filter.
+ * @param[in] S points to an instance of the fixed-point Q15 IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] pkCoeffs points to reflection coefficient buffer. The array is of length numStages.
+ * @param[in] pvCoeffs points to ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] pState points to state buffer. The array is of length numStages+blockSize.
+ * @param[in] blockSize number of samples to process per call.
+ */
+ void arm_iir_lattice_init_q15(
+ arm_iir_lattice_instance_q15 * S,
+ uint16_t numStages,
+ q15_t * pkCoeffs,
+ q15_t * pvCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the floating-point LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ float32_t mu; /**< step size that controls filter coefficient updates. */
+ } arm_lms_instance_f32;
+
+
+ /**
+ * @brief Processing function for floating-point LMS filter.
+ * @param[in] S points to an instance of the floating-point LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_f32(
+ const arm_lms_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pRef,
+ float32_t * pOut,
+ float32_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for floating-point LMS filter.
+ * @param[in] S points to an instance of the floating-point LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to the coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_init_f32(
+ arm_lms_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ float32_t mu,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q15_t mu; /**< step size that controls filter coefficient updates. */
+ uint32_t postShift; /**< bit shift applied to coefficients. */
+ } arm_lms_instance_q15;
+
+
+ /**
+ * @brief Initialization function for the Q15 LMS filter.
+ * @param[in] S points to an instance of the Q15 LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to the coefficient buffer.
+ * @param[in] pState points to the state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ */
+ void arm_lms_init_q15(
+ arm_lms_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ q15_t mu,
+ uint32_t blockSize,
+ uint32_t postShift);
+
+
+ /**
+ * @brief Processing function for Q15 LMS filter.
+ * @param[in] S points to an instance of the Q15 LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_q15(
+ const arm_lms_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pRef,
+ q15_t * pOut,
+ q15_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q31 LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q31_t mu; /**< step size that controls filter coefficient updates. */
+ uint32_t postShift; /**< bit shift applied to coefficients. */
+ } arm_lms_instance_q31;
+
+
+ /**
+ * @brief Processing function for Q31 LMS filter.
+ * @param[in] S points to an instance of the Q15 LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_q31(
+ const arm_lms_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pRef,
+ q31_t * pOut,
+ q31_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for Q31 LMS filter.
+ * @param[in] S points to an instance of the Q31 LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ */
+ void arm_lms_init_q31(
+ arm_lms_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ q31_t mu,
+ uint32_t blockSize,
+ uint32_t postShift);
+
+
+ /**
+ * @brief Instance structure for the floating-point normalized LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ float32_t mu; /**< step size that control filter coefficient updates. */
+ float32_t energy; /**< saves previous frame energy. */
+ float32_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_f32;
+
+
+ /**
+ * @brief Processing function for floating-point normalized LMS filter.
+ * @param[in] S points to an instance of the floating-point normalized LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_norm_f32(
+ arm_lms_norm_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pRef,
+ float32_t * pOut,
+ float32_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for floating-point normalized LMS filter.
+ * @param[in] S points to an instance of the floating-point LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_norm_init_f32(
+ arm_lms_norm_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ float32_t mu,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q31 normalized LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q31_t mu; /**< step size that controls filter coefficient updates. */
+ uint8_t postShift; /**< bit shift applied to coefficients. */
+ q31_t *recipTable; /**< points to the reciprocal initial value table. */
+ q31_t energy; /**< saves previous frame energy. */
+ q31_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_q31;
+
+
+ /**
+ * @brief Processing function for Q31 normalized LMS filter.
+ * @param[in] S points to an instance of the Q31 normalized LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_norm_q31(
+ arm_lms_norm_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pRef,
+ q31_t * pOut,
+ q31_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for Q31 normalized LMS filter.
+ * @param[in] S points to an instance of the Q31 normalized LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ */
+ void arm_lms_norm_init_q31(
+ arm_lms_norm_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ q31_t mu,
+ uint32_t blockSize,
+ uint8_t postShift);
+
+
+ /**
+ * @brief Instance structure for the Q15 normalized LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< Number of coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q15_t mu; /**< step size that controls filter coefficient updates. */
+ uint8_t postShift; /**< bit shift applied to coefficients. */
+ q15_t *recipTable; /**< Points to the reciprocal initial value table. */
+ q15_t energy; /**< saves previous frame energy. */
+ q15_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_q15;
+
+
+ /**
+ * @brief Processing function for Q15 normalized LMS filter.
+ * @param[in] S points to an instance of the Q15 normalized LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_norm_q15(
+ arm_lms_norm_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pRef,
+ q15_t * pOut,
+ q15_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for Q15 normalized LMS filter.
+ * @param[in] S points to an instance of the Q15 normalized LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ */
+ void arm_lms_norm_init_q15(
+ arm_lms_norm_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ q15_t mu,
+ uint32_t blockSize,
+ uint8_t postShift);
+
+
+ /**
+ * @brief Correlation of floating-point sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+ void arm_correlate_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q15 sequences
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @param[in] pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ */
+ void arm_correlate_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch);
+
+
+ /**
+ * @brief Correlation of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+
+ void arm_correlate_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+
+ void arm_correlate_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @param[in] pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ */
+ void arm_correlate_fast_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch);
+
+
+ /**
+ * @brief Correlation of Q31 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+ void arm_correlate_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+ void arm_correlate_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+ */
+ void arm_correlate_opt_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Correlation of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+ void arm_correlate_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst);
+
+
+ /**
+ * @brief Instance structure for the floating-point sparse FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ float32_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_f32;
+
+ /**
+ * @brief Instance structure for the Q31 sparse FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q31_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q31;
+
+ /**
+ * @brief Instance structure for the Q15 sparse FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q15_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q7 sparse FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q7_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q7;
+
+
+ /**
+ * @brief Processing function for the floating-point sparse FIR filter.
+ * @param[in] S points to an instance of the floating-point sparse FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_sparse_f32(
+ arm_fir_sparse_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ float32_t * pScratchIn,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point sparse FIR filter.
+ * @param[in,out] S points to an instance of the floating-point sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] pCoeffs points to the array of filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ */
+ void arm_fir_sparse_init_f32(
+ arm_fir_sparse_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 sparse FIR filter.
+ * @param[in] S points to an instance of the Q31 sparse FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_sparse_q31(
+ arm_fir_sparse_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ q31_t * pScratchIn,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 sparse FIR filter.
+ * @param[in,out] S points to an instance of the Q31 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] pCoeffs points to the array of filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ */
+ void arm_fir_sparse_init_q31(
+ arm_fir_sparse_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 sparse FIR filter.
+ * @param[in] S points to an instance of the Q15 sparse FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] pScratchOut points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_sparse_q15(
+ arm_fir_sparse_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ q15_t * pScratchIn,
+ q31_t * pScratchOut,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 sparse FIR filter.
+ * @param[in,out] S points to an instance of the Q15 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] pCoeffs points to the array of filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ */
+ void arm_fir_sparse_init_q15(
+ arm_fir_sparse_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q7 sparse FIR filter.
+ * @param[in] S points to an instance of the Q7 sparse FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] pScratchOut points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_sparse_q7(
+ arm_fir_sparse_instance_q7 * S,
+ q7_t * pSrc,
+ q7_t * pDst,
+ q7_t * pScratchIn,
+ q31_t * pScratchOut,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q7 sparse FIR filter.
+ * @param[in,out] S points to an instance of the Q7 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] pCoeffs points to the array of filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ */
+ void arm_fir_sparse_init_q7(
+ arm_fir_sparse_instance_q7 * S,
+ uint16_t numTaps,
+ q7_t * pCoeffs,
+ q7_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Floating-point sin_cos function.
+ * @param[in] theta input value in degrees
+ * @param[out] pSinVal points to the processed sine output.
+ * @param[out] pCosVal points to the processed cos output.
+ */
+ void arm_sin_cos_f32(
+ float32_t theta,
+ float32_t * pSinVal,
+ float32_t * pCosVal);
+
+
+ /**
+ * @brief Q31 sin_cos function.
+ * @param[in] theta scaled input value in degrees
+ * @param[out] pSinVal points to the processed sine output.
+ * @param[out] pCosVal points to the processed cosine output.
+ */
+ void arm_sin_cos_q31(
+ q31_t theta,
+ q31_t * pSinVal,
+ q31_t * pCosVal);
+
+
+ /**
+ * @brief Floating-point complex conjugate.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_conj_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q31 complex conjugate.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_conj_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q15 complex conjugate.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_conj_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Floating-point complex magnitude squared
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_squared_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q31 complex magnitude squared
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_squared_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q15 complex magnitude squared
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_squared_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup PID PID Motor Control
+ *
+ * A Proportional Integral Derivative (PID) controller is a generic feedback control
+ * loop mechanism widely used in industrial control systems.
+ * A PID controller is the most commonly used type of feedback controller.
+ *
+ * This set of functions implements (PID) controllers
+ * for Q15, Q31, and floating-point data types. The functions operate on a single sample
+ * of data and each call to the function returns a single processed value.
+ * S points to an instance of the PID control data structure. in
+ * is the input sample value. The functions return the output value.
+ *
+ * \par Algorithm:
+ *
+ * y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2]
+ * A0 = Kp + Ki + Kd
+ * A1 = (-Kp ) - (2 * Kd )
+ * A2 = Kd
+ *
+ * \par
+ * where \c Kp is proportional constant, \c Ki is Integral constant and \c Kd is Derivative constant
+ *
+ * \par
+ * \image html PID.gif "Proportional Integral Derivative Controller"
+ *
+ * \par
+ * The PID controller calculates an "error" value as the difference between
+ * the measured output and the reference input.
+ * The controller attempts to minimize the error by adjusting the process control inputs.
+ * The proportional value determines the reaction to the current error,
+ * the integral value determines the reaction based on the sum of recent errors,
+ * and the derivative value determines the reaction based on the rate at which the error has been changing.
+ *
+ * \par Instance Structure
+ * The Gains A0, A1, A2 and state variables for a PID controller are stored together in an instance data structure.
+ * A separate instance structure must be defined for each PID Controller.
+ * There are separate instance structure declarations for each of the 3 supported data types.
+ *
+ * \par Reset Functions
+ * There is also an associated reset function for each data type which clears the state array.
+ *
+ * \par Initialization Functions
+ * There is also an associated initialization function for each data type.
+ * The initialization function performs the following operations:
+ * - Initializes the Gains A0, A1, A2 from Kp,Ki, Kd gains.
+ * - Zeros out the values in the state buffer.
+ *
+ * \par
+ * Instance structure cannot be placed into a const data section and it is recommended to use the initialization function.
+ *
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the fixed-point versions of the PID Controller functions.
+ * In particular, the overflow and saturation behavior of the accumulator used in each function must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup PID
+ * @{
+ */
+
+ /**
+ * @brief Process function for the floating-point PID Control.
+ * @param[in,out] S is an instance of the floating-point PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ */
+ static __INLINE float32_t arm_pid_f32(
+ arm_pid_instance_f32 * S,
+ float32_t in)
+ {
+ float32_t out;
+
+ /* y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2] */
+ out = (S->A0 * in) +
+ (S->A1 * S->state[0]) + (S->A2 * S->state[1]) + (S->state[2]);
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+
+ }
+
+ /**
+ * @brief Process function for the Q31 PID Control.
+ * @param[in,out] S points to an instance of the Q31 PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 64-bit accumulator.
+ * The accumulator has a 2.62 format and maintains full precision of the intermediate multiplication results but provides only a single guard bit.
+ * Thus, if the accumulator result overflows it wraps around rather than clip.
+ * In order to avoid overflows completely the input signal must be scaled down by 2 bits as there are four additions.
+ * After all multiply-accumulates are performed, the 2.62 accumulator is truncated to 1.32 format and then saturated to 1.31 format.
+ */
+ static __INLINE q31_t arm_pid_q31(
+ arm_pid_instance_q31 * S,
+ q31_t in)
+ {
+ q63_t acc;
+ q31_t out;
+
+ /* acc = A0 * x[n] */
+ acc = (q63_t) S->A0 * in;
+
+ /* acc += A1 * x[n-1] */
+ acc += (q63_t) S->A1 * S->state[0];
+
+ /* acc += A2 * x[n-2] */
+ acc += (q63_t) S->A2 * S->state[1];
+
+ /* convert output to 1.31 format to add y[n-1] */
+ out = (q31_t) (acc >> 31u);
+
+ /* out += y[n-1] */
+ out += S->state[2];
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+ }
+
+
+ /**
+ * @brief Process function for the Q15 PID Control.
+ * @param[in,out] S points to an instance of the Q15 PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using a 64-bit internal accumulator.
+ * Both Gains and state variables are represented in 1.15 format and multiplications yield a 2.30 result.
+ * The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format.
+ * There is no risk of internal overflow with this approach and the full precision of intermediate multiplications is preserved.
+ * After all additions have been performed, the accumulator is truncated to 34.15 format by discarding low 15 bits.
+ * Lastly, the accumulator is saturated to yield a result in 1.15 format.
+ */
+ static __INLINE q15_t arm_pid_q15(
+ arm_pid_instance_q15 * S,
+ q15_t in)
+ {
+ q63_t acc;
+ q15_t out;
+
+#ifndef ARM_MATH_CM0_FAMILY
+ __SIMD32_TYPE *vstate;
+
+ /* Implementation of PID controller */
+
+ /* acc = A0 * x[n] */
+ acc = (q31_t) __SMUAD((uint32_t)S->A0, (uint32_t)in);
+
+ /* acc += A1 * x[n-1] + A2 * x[n-2] */
+ vstate = __SIMD32_CONST(S->state);
+ acc = (q63_t)__SMLALD((uint32_t)S->A1, (uint32_t)*vstate, (uint64_t)acc);
+#else
+ /* acc = A0 * x[n] */
+ acc = ((q31_t) S->A0) * in;
+
+ /* acc += A1 * x[n-1] + A2 * x[n-2] */
+ acc += (q31_t) S->A1 * S->state[0];
+ acc += (q31_t) S->A2 * S->state[1];
+#endif
+
+ /* acc += y[n-1] */
+ acc += (q31_t) S->state[2] << 15;
+
+ /* saturate the output */
+ out = (q15_t) (__SSAT((acc >> 15), 16));
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+ }
+
+ /**
+ * @} end of PID group
+ */
+
+
+ /**
+ * @brief Floating-point matrix inverse.
+ * @param[in] src points to the instance of the input floating-point matrix structure.
+ * @param[out] dst points to the instance of the output floating-point matrix structure.
+ * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
+ * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
+ */
+ arm_status arm_mat_inverse_f32(
+ const arm_matrix_instance_f32 * src,
+ arm_matrix_instance_f32 * dst);
+
+
+ /**
+ * @brief Floating-point matrix inverse.
+ * @param[in] src points to the instance of the input floating-point matrix structure.
+ * @param[out] dst points to the instance of the output floating-point matrix structure.
+ * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
+ * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
+ */
+ arm_status arm_mat_inverse_f64(
+ const arm_matrix_instance_f64 * src,
+ arm_matrix_instance_f64 * dst);
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup clarke Vector Clarke Transform
+ * Forward Clarke transform converts the instantaneous stator phases into a two-coordinate time invariant vector.
+ * Generally the Clarke transform uses three-phase currents Ia, Ib and Ic to calculate currents
+ * in the two-phase orthogonal stator axis Ialpha and Ibeta.
+ * When Ialpha is superposed with Ia as shown in the figure below
+ * \image html clarke.gif Stator current space vector and its components in (a,b).
+ * and Ia + Ib + Ic = 0, in this condition Ialpha and Ibeta
+ * can be calculated using only Ia and Ib.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html clarkeFormula.gif
+ * where Ia and Ib are the instantaneous stator phases and
+ * pIalpha and pIbeta are the two coordinates of time invariant vector.
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Clarke transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup clarke
+ * @{
+ */
+
+ /**
+ *
+ * @brief Floating-point Clarke transform
+ * @param[in] Ia input three-phase coordinate a
+ * @param[in] Ib input three-phase coordinate b
+ * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
+ */
+ static __INLINE void arm_clarke_f32(
+ float32_t Ia,
+ float32_t Ib,
+ float32_t * pIalpha,
+ float32_t * pIbeta)
+ {
+ /* Calculate pIalpha using the equation, pIalpha = Ia */
+ *pIalpha = Ia;
+
+ /* Calculate pIbeta using the equation, pIbeta = (1/sqrt(3)) * Ia + (2/sqrt(3)) * Ib */
+ *pIbeta = ((float32_t) 0.57735026919 * Ia + (float32_t) 1.15470053838 * Ib);
+ }
+
+
+ /**
+ * @brief Clarke transform for Q31 version
+ * @param[in] Ia input three-phase coordinate a
+ * @param[in] Ib input three-phase coordinate b
+ * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition, hence there is no risk of overflow.
+ */
+ static __INLINE void arm_clarke_q31(
+ q31_t Ia,
+ q31_t Ib,
+ q31_t * pIalpha,
+ q31_t * pIbeta)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+
+ /* Calculating pIalpha from Ia by equation pIalpha = Ia */
+ *pIalpha = Ia;
+
+ /* Intermediate product is calculated by (1/(sqrt(3)) * Ia) */
+ product1 = (q31_t) (((q63_t) Ia * 0x24F34E8B) >> 30);
+
+ /* Intermediate product is calculated by (2/sqrt(3) * Ib) */
+ product2 = (q31_t) (((q63_t) Ib * 0x49E69D16) >> 30);
+
+ /* pIbeta is calculated by adding the intermediate products */
+ *pIbeta = __QADD(product1, product2);
+ }
+
+ /**
+ * @} end of clarke group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to Q31 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_q7_to_q31(
+ q7_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup inv_clarke Vector Inverse Clarke Transform
+ * Inverse Clarke transform converts the two-coordinate time invariant vector into instantaneous stator phases.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html clarkeInvFormula.gif
+ * where pIa and pIb are the instantaneous stator phases and
+ * Ialpha and Ibeta are the two coordinates of time invariant vector.
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Clarke transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup inv_clarke
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Inverse Clarke transform
+ * @param[in] Ialpha input two-phase orthogonal vector axis alpha
+ * @param[in] Ibeta input two-phase orthogonal vector axis beta
+ * @param[out] pIa points to output three-phase coordinate a
+ * @param[out] pIb points to output three-phase coordinate b
+ */
+ static __INLINE void arm_inv_clarke_f32(
+ float32_t Ialpha,
+ float32_t Ibeta,
+ float32_t * pIa,
+ float32_t * pIb)
+ {
+ /* Calculating pIa from Ialpha by equation pIa = Ialpha */
+ *pIa = Ialpha;
+
+ /* Calculating pIb from Ialpha and Ibeta by equation pIb = -(1/2) * Ialpha + (sqrt(3)/2) * Ibeta */
+ *pIb = -0.5f * Ialpha + 0.8660254039f * Ibeta;
+ }
+
+
+ /**
+ * @brief Inverse Clarke transform for Q31 version
+ * @param[in] Ialpha input two-phase orthogonal vector axis alpha
+ * @param[in] Ibeta input two-phase orthogonal vector axis beta
+ * @param[out] pIa points to output three-phase coordinate a
+ * @param[out] pIb points to output three-phase coordinate b
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the subtraction, hence there is no risk of overflow.
+ */
+ static __INLINE void arm_inv_clarke_q31(
+ q31_t Ialpha,
+ q31_t Ibeta,
+ q31_t * pIa,
+ q31_t * pIb)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+
+ /* Calculating pIa from Ialpha by equation pIa = Ialpha */
+ *pIa = Ialpha;
+
+ /* Intermediate product is calculated by (1/(2*sqrt(3)) * Ia) */
+ product1 = (q31_t) (((q63_t) (Ialpha) * (0x40000000)) >> 31);
+
+ /* Intermediate product is calculated by (1/sqrt(3) * pIb) */
+ product2 = (q31_t) (((q63_t) (Ibeta) * (0x6ED9EBA1)) >> 31);
+
+ /* pIb is calculated by subtracting the products */
+ *pIb = __QSUB(product2, product1);
+ }
+
+ /**
+ * @} end of inv_clarke group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to Q15 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_q7_to_q15(
+ q7_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup park Vector Park Transform
+ *
+ * Forward Park transform converts the input two-coordinate vector to flux and torque components.
+ * The Park transform can be used to realize the transformation of the Ialpha and the Ibeta currents
+ * from the stationary to the moving reference frame and control the spatial relationship between
+ * the stator vector current and rotor flux vector.
+ * If we consider the d axis aligned with the rotor flux, the diagram below shows the
+ * current vector and the relationship from the two reference frames:
+ * \image html park.gif "Stator current space vector and its component in (a,b) and in the d,q rotating reference frame"
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html parkFormula.gif
+ * where Ialpha and Ibeta are the stator vector components,
+ * pId and pIq are rotor vector components and cosVal and sinVal are the
+ * cosine and sine values of theta (rotor flux position).
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Park transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup park
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Park transform
+ * @param[in] Ialpha input two-phase vector coordinate alpha
+ * @param[in] Ibeta input two-phase vector coordinate beta
+ * @param[out] pId points to output rotor reference frame d
+ * @param[out] pIq points to output rotor reference frame q
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ *
+ * The function implements the forward Park transform.
+ *
+ */
+ static __INLINE void arm_park_f32(
+ float32_t Ialpha,
+ float32_t Ibeta,
+ float32_t * pId,
+ float32_t * pIq,
+ float32_t sinVal,
+ float32_t cosVal)
+ {
+ /* Calculate pId using the equation, pId = Ialpha * cosVal + Ibeta * sinVal */
+ *pId = Ialpha * cosVal + Ibeta * sinVal;
+
+ /* Calculate pIq using the equation, pIq = - Ialpha * sinVal + Ibeta * cosVal */
+ *pIq = -Ialpha * sinVal + Ibeta * cosVal;
+ }
+
+
+ /**
+ * @brief Park transform for Q31 version
+ * @param[in] Ialpha input two-phase vector coordinate alpha
+ * @param[in] Ibeta input two-phase vector coordinate beta
+ * @param[out] pId points to output rotor reference frame d
+ * @param[out] pIq points to output rotor reference frame q
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition and subtraction, hence there is no risk of overflow.
+ */
+ static __INLINE void arm_park_q31(
+ q31_t Ialpha,
+ q31_t Ibeta,
+ q31_t * pId,
+ q31_t * pIq,
+ q31_t sinVal,
+ q31_t cosVal)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+ q31_t product3, product4; /* Temporary variables used to store intermediate results */
+
+ /* Intermediate product is calculated by (Ialpha * cosVal) */
+ product1 = (q31_t) (((q63_t) (Ialpha) * (cosVal)) >> 31);
+
+ /* Intermediate product is calculated by (Ibeta * sinVal) */
+ product2 = (q31_t) (((q63_t) (Ibeta) * (sinVal)) >> 31);
+
+
+ /* Intermediate product is calculated by (Ialpha * sinVal) */
+ product3 = (q31_t) (((q63_t) (Ialpha) * (sinVal)) >> 31);
+
+ /* Intermediate product is calculated by (Ibeta * cosVal) */
+ product4 = (q31_t) (((q63_t) (Ibeta) * (cosVal)) >> 31);
+
+ /* Calculate pId by adding the two intermediate products 1 and 2 */
+ *pId = __QADD(product1, product2);
+
+ /* Calculate pIq by subtracting the two intermediate products 3 from 4 */
+ *pIq = __QSUB(product4, product3);
+ }
+
+ /**
+ * @} end of park group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q7_to_float(
+ q7_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup inv_park Vector Inverse Park transform
+ * Inverse Park transform converts the input flux and torque components to two-coordinate vector.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html parkInvFormula.gif
+ * where pIalpha and pIbeta are the stator vector components,
+ * Id and Iq are rotor vector components and cosVal and sinVal are the
+ * cosine and sine values of theta (rotor flux position).
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Park transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup inv_park
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Inverse Park transform
+ * @param[in] Id input coordinate of rotor reference frame d
+ * @param[in] Iq input coordinate of rotor reference frame q
+ * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ */
+ static __INLINE void arm_inv_park_f32(
+ float32_t Id,
+ float32_t Iq,
+ float32_t * pIalpha,
+ float32_t * pIbeta,
+ float32_t sinVal,
+ float32_t cosVal)
+ {
+ /* Calculate pIalpha using the equation, pIalpha = Id * cosVal - Iq * sinVal */
+ *pIalpha = Id * cosVal - Iq * sinVal;
+
+ /* Calculate pIbeta using the equation, pIbeta = Id * sinVal + Iq * cosVal */
+ *pIbeta = Id * sinVal + Iq * cosVal;
+ }
+
+
+ /**
+ * @brief Inverse Park transform for Q31 version
+ * @param[in] Id input coordinate of rotor reference frame d
+ * @param[in] Iq input coordinate of rotor reference frame q
+ * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition, hence there is no risk of overflow.
+ */
+ static __INLINE void arm_inv_park_q31(
+ q31_t Id,
+ q31_t Iq,
+ q31_t * pIalpha,
+ q31_t * pIbeta,
+ q31_t sinVal,
+ q31_t cosVal)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+ q31_t product3, product4; /* Temporary variables used to store intermediate results */
+
+ /* Intermediate product is calculated by (Id * cosVal) */
+ product1 = (q31_t) (((q63_t) (Id) * (cosVal)) >> 31);
+
+ /* Intermediate product is calculated by (Iq * sinVal) */
+ product2 = (q31_t) (((q63_t) (Iq) * (sinVal)) >> 31);
+
+
+ /* Intermediate product is calculated by (Id * sinVal) */
+ product3 = (q31_t) (((q63_t) (Id) * (sinVal)) >> 31);
+
+ /* Intermediate product is calculated by (Iq * cosVal) */
+ product4 = (q31_t) (((q63_t) (Iq) * (cosVal)) >> 31);
+
+ /* Calculate pIalpha by using the two intermediate products 1 and 2 */
+ *pIalpha = __QSUB(product1, product2);
+
+ /* Calculate pIbeta by using the two intermediate products 3 and 4 */
+ *pIbeta = __QADD(product4, product3);
+ }
+
+ /**
+ * @} end of Inverse park group
+ */
+
+
+ /**
+ * @brief Converts the elements of the Q31 vector to floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q31_to_float(
+ q31_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @ingroup groupInterpolation
+ */
+
+ /**
+ * @defgroup LinearInterpolate Linear Interpolation
+ *
+ * Linear interpolation is a method of curve fitting using linear polynomials.
+ * Linear interpolation works by effectively drawing a straight line between two neighboring samples and returning the appropriate point along that line
+ *
+ * \par
+ * \image html LinearInterp.gif "Linear interpolation"
+ *
+ * \par
+ * A Linear Interpolate function calculates an output value(y), for the input(x)
+ * using linear interpolation of the input values x0, x1( nearest input values) and the output values y0 and y1(nearest output values)
+ *
+ * \par Algorithm:
+ *
+ * y = y0 + (x - x0) * ((y1 - y0)/(x1-x0))
+ * where x0, x1 are nearest values of input x
+ * y0, y1 are nearest values to output y
+ *
+ *
+ * \par
+ * This set of functions implements Linear interpolation process
+ * for Q7, Q15, Q31, and floating-point data types. The functions operate on a single
+ * sample of data and each call to the function returns a single processed value.
+ * S points to an instance of the Linear Interpolate function data structure.
+ * x is the input sample value. The functions returns the output value.
+ *
+ * \par
+ * if x is outside of the table boundary, Linear interpolation returns first value of the table
+ * if x is below input range and returns last value of table if x is above range.
+ */
+
+ /**
+ * @addtogroup LinearInterpolate
+ * @{
+ */
+
+ /**
+ * @brief Process function for the floating-point Linear Interpolation Function.
+ * @param[in,out] S is an instance of the floating-point Linear Interpolation structure
+ * @param[in] x input sample to process
+ * @return y processed output sample.
+ *
+ */
+ static __INLINE float32_t arm_linear_interp_f32(
+ arm_linear_interp_instance_f32 * S,
+ float32_t x)
+ {
+ float32_t y;
+ float32_t x0, x1; /* Nearest input values */
+ float32_t y0, y1; /* Nearest output values */
+ float32_t xSpacing = S->xSpacing; /* spacing between input values */
+ int32_t i; /* Index variable */
+ float32_t *pYData = S->pYData; /* pointer to output table */
+
+ /* Calculation of index */
+ i = (int32_t) ((x - S->x1) / xSpacing);
+
+ if(i < 0)
+ {
+ /* Iniatilize output for below specified range as least output value of table */
+ y = pYData[0];
+ }
+ else if((uint32_t)i >= S->nValues)
+ {
+ /* Iniatilize output for above specified range as last output value of table */
+ y = pYData[S->nValues - 1];
+ }
+ else
+ {
+ /* Calculation of nearest input values */
+ x0 = S->x1 + i * xSpacing;
+ x1 = S->x1 + (i + 1) * xSpacing;
+
+ /* Read of nearest output values */
+ y0 = pYData[i];
+ y1 = pYData[i + 1];
+
+ /* Calculation of output */
+ y = y0 + (x - x0) * ((y1 - y0) / (x1 - x0));
+
+ }
+
+ /* returns output value */
+ return (y);
+ }
+
+
+ /**
+ *
+ * @brief Process function for the Q31 Linear Interpolation Function.
+ * @param[in] pYData pointer to Q31 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample x is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ *
+ */
+ static __INLINE q31_t arm_linear_interp_q31(
+ q31_t * pYData,
+ q31_t x,
+ uint32_t nValues)
+ {
+ q31_t y; /* output */
+ q31_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ int32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ index = ((x & (q31_t)0xFFF00000) >> 20);
+
+ if(index >= (int32_t)(nValues - 1))
+ {
+ return (pYData[nValues - 1]);
+ }
+ else if(index < 0)
+ {
+ return (pYData[0]);
+ }
+ else
+ {
+ /* 20 bits for the fractional part */
+ /* shift left by 11 to keep fract in 1.31 format */
+ fract = (x & 0x000FFFFF) << 11;
+
+ /* Read two nearest output values from the index in 1.31(q31) format */
+ y0 = pYData[index];
+ y1 = pYData[index + 1];
+
+ /* Calculation of y0 * (1-fract) and y is in 2.30 format */
+ y = ((q31_t) ((q63_t) y0 * (0x7FFFFFFF - fract) >> 32));
+
+ /* Calculation of y0 * (1-fract) + y1 *fract and y is in 2.30 format */
+ y += ((q31_t) (((q63_t) y1 * fract) >> 32));
+
+ /* Convert y to 1.31 format */
+ return (y << 1u);
+ }
+ }
+
+
+ /**
+ *
+ * @brief Process function for the Q15 Linear Interpolation Function.
+ * @param[in] pYData pointer to Q15 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample x is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ *
+ */
+ static __INLINE q15_t arm_linear_interp_q15(
+ q15_t * pYData,
+ q31_t x,
+ uint32_t nValues)
+ {
+ q63_t y; /* output */
+ q15_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ int32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ index = ((x & (int32_t)0xFFF00000) >> 20);
+
+ if(index >= (int32_t)(nValues - 1))
+ {
+ return (pYData[nValues - 1]);
+ }
+ else if(index < 0)
+ {
+ return (pYData[0]);
+ }
+ else
+ {
+ /* 20 bits for the fractional part */
+ /* fract is in 12.20 format */
+ fract = (x & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y0 = pYData[index];
+ y1 = pYData[index + 1];
+
+ /* Calculation of y0 * (1-fract) and y is in 13.35 format */
+ y = ((q63_t) y0 * (0xFFFFF - fract));
+
+ /* Calculation of (y0 * (1-fract) + y1 * fract) and y is in 13.35 format */
+ y += ((q63_t) y1 * (fract));
+
+ /* convert y to 1.15 format */
+ return (q15_t) (y >> 20);
+ }
+ }
+
+
+ /**
+ *
+ * @brief Process function for the Q7 Linear Interpolation Function.
+ * @param[in] pYData pointer to Q7 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample x is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ */
+ static __INLINE q7_t arm_linear_interp_q7(
+ q7_t * pYData,
+ q31_t x,
+ uint32_t nValues)
+ {
+ q31_t y; /* output */
+ q7_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ uint32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ if (x < 0)
+ {
+ return (pYData[0]);
+ }
+ index = (x >> 20) & 0xfff;
+
+ if(index >= (nValues - 1))
+ {
+ return (pYData[nValues - 1]);
+ }
+ else
+ {
+ /* 20 bits for the fractional part */
+ /* fract is in 12.20 format */
+ fract = (x & 0x000FFFFF);
+
+ /* Read two nearest output values from the index and are in 1.7(q7) format */
+ y0 = pYData[index];
+ y1 = pYData[index + 1];
+
+ /* Calculation of y0 * (1-fract ) and y is in 13.27(q27) format */
+ y = ((y0 * (0xFFFFF - fract)));
+
+ /* Calculation of y1 * fract + y0 * (1-fract) and y is in 13.27(q27) format */
+ y += (y1 * fract);
+
+ /* convert y to 1.7(q7) format */
+ return (q7_t) (y >> 20);
+ }
+ }
+
+ /**
+ * @} end of LinearInterpolate group
+ */
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for floating-point data.
+ * @param[in] x input value in radians.
+ * @return sin(x).
+ */
+ float32_t arm_sin_f32(
+ float32_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for Q31 data.
+ * @param[in] x Scaled input value in radians.
+ * @return sin(x).
+ */
+ q31_t arm_sin_q31(
+ q31_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for Q15 data.
+ * @param[in] x Scaled input value in radians.
+ * @return sin(x).
+ */
+ q15_t arm_sin_q15(
+ q15_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for floating-point data.
+ * @param[in] x input value in radians.
+ * @return cos(x).
+ */
+ float32_t arm_cos_f32(
+ float32_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for Q31 data.
+ * @param[in] x Scaled input value in radians.
+ * @return cos(x).
+ */
+ q31_t arm_cos_q31(
+ q31_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for Q15 data.
+ * @param[in] x Scaled input value in radians.
+ * @return cos(x).
+ */
+ q15_t arm_cos_q15(
+ q15_t x);
+
+
+ /**
+ * @ingroup groupFastMath
+ */
+
+
+ /**
+ * @defgroup SQRT Square Root
+ *
+ * Computes the square root of a number.
+ * There are separate functions for Q15, Q31, and floating-point data types.
+ * The square root function is computed using the Newton-Raphson algorithm.
+ * This is an iterative algorithm of the form:
+ *
+ * x1 = x0 - f(x0)/f'(x0)
+ *
+ * where x1 is the current estimate,
+ * x0 is the previous estimate, and
+ * f'(x0) is the derivative of f() evaluated at x0.
+ * For the square root function, the algorithm reduces to:
+ *
+ * x0 = in/2 [initial guess]
+ * x1 = 1/2 * ( x0 + in / x0) [each iteration]
+ *
+ */
+
+
+ /**
+ * @addtogroup SQRT
+ * @{
+ */
+
+ /**
+ * @brief Floating-point square root function.
+ * @param[in] in input value.
+ * @param[out] pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * in is negative value and returns zero output for negative values.
+ */
+ static __INLINE arm_status arm_sqrt_f32(
+ float32_t in,
+ float32_t * pOut)
+ {
+ if(in >= 0.0f)
+ {
+
+#if (__FPU_USED == 1) && defined ( __CC_ARM )
+ *pOut = __sqrtf(in);
+#elif (__FPU_USED == 1) && (defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050))
+ *pOut = __builtin_sqrtf(in);
+#elif (__FPU_USED == 1) && defined(__GNUC__)
+ *pOut = __builtin_sqrtf(in);
+#elif (__FPU_USED == 1) && defined ( __ICCARM__ ) && (__VER__ >= 6040000)
+ __ASM("VSQRT.F32 %0,%1" : "=t"(*pOut) : "t"(in));
+#else
+ *pOut = sqrtf(in);
+#endif
+
+ return (ARM_MATH_SUCCESS);
+ }
+ else
+ {
+ *pOut = 0.0f;
+ return (ARM_MATH_ARGUMENT_ERROR);
+ }
+ }
+
+
+ /**
+ * @brief Q31 square root function.
+ * @param[in] in input value. The range of the input value is [0 +1) or 0x00000000 to 0x7FFFFFFF.
+ * @param[out] pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * in is negative value and returns zero output for negative values.
+ */
+ arm_status arm_sqrt_q31(
+ q31_t in,
+ q31_t * pOut);
+
+
+ /**
+ * @brief Q15 square root function.
+ * @param[in] in input value. The range of the input value is [0 +1) or 0x0000 to 0x7FFF.
+ * @param[out] pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * in is negative value and returns zero output for negative values.
+ */
+ arm_status arm_sqrt_q15(
+ q15_t in,
+ q15_t * pOut);
+
+ /**
+ * @} end of SQRT group
+ */
+
+
+ /**
+ * @brief floating-point Circular write function.
+ */
+ static __INLINE void arm_circularWrite_f32(
+ int32_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const int32_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = (uint16_t)wOffset;
+ }
+
+
+
+ /**
+ * @brief floating-point Circular Read function.
+ */
+ static __INLINE void arm_circularRead_f32(
+ int32_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ int32_t * dst,
+ int32_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (int32_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update rOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+
+ /**
+ * @brief Q15 Circular write function.
+ */
+ static __INLINE void arm_circularWrite_q15(
+ q15_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const q15_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = (uint16_t)wOffset;
+ }
+
+
+ /**
+ * @brief Q15 Circular Read function.
+ */
+ static __INLINE void arm_circularRead_q15(
+ q15_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ q15_t * dst,
+ q15_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (q15_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+
+ /**
+ * @brief Q7 Circular write function.
+ */
+ static __INLINE void arm_circularWrite_q7(
+ q7_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const q7_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = (uint16_t)wOffset;
+ }
+
+
+ /**
+ * @brief Q7 Circular Read function.
+ */
+ static __INLINE void arm_circularRead_q7(
+ q7_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ q7_t * dst,
+ q7_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (q7_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update rOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+
+ /**
+ * @brief Sum of the squares of the elements of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_power_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q63_t * pResult);
+
+
+ /**
+ * @brief Sum of the squares of the elements of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_power_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Sum of the squares of the elements of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_power_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q63_t * pResult);
+
+
+ /**
+ * @brief Sum of the squares of the elements of a Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_power_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Mean value of a Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_mean_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * pResult);
+
+
+ /**
+ * @brief Mean value of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_mean_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+
+ /**
+ * @brief Mean value of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_mean_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Mean value of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_mean_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Variance of the elements of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_var_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Variance of the elements of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_var_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Variance of the elements of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_var_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+
+ /**
+ * @brief Root Mean Square of the elements of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_rms_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Root Mean Square of the elements of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_rms_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Root Mean Square of the elements of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_rms_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+
+ /**
+ * @brief Standard deviation of the elements of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_std_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Standard deviation of the elements of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_std_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Standard deviation of the elements of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_std_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+
+ /**
+ * @brief Floating-point complex magnitude
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q31 complex magnitude
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q15 complex magnitude
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q15 complex dot product
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] realResult real part of the result returned here
+ * @param[out] imagResult imaginary part of the result returned here
+ */
+ void arm_cmplx_dot_prod_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ uint32_t numSamples,
+ q31_t * realResult,
+ q31_t * imagResult);
+
+
+ /**
+ * @brief Q31 complex dot product
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] realResult real part of the result returned here
+ * @param[out] imagResult imaginary part of the result returned here
+ */
+ void arm_cmplx_dot_prod_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ uint32_t numSamples,
+ q63_t * realResult,
+ q63_t * imagResult);
+
+
+ /**
+ * @brief Floating-point complex dot product
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] realResult real part of the result returned here
+ * @param[out] imagResult imaginary part of the result returned here
+ */
+ void arm_cmplx_dot_prod_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ uint32_t numSamples,
+ float32_t * realResult,
+ float32_t * imagResult);
+
+
+ /**
+ * @brief Q15 complex-by-real multiplication
+ * @param[in] pSrcCmplx points to the complex input vector
+ * @param[in] pSrcReal points to the real input vector
+ * @param[out] pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ */
+ void arm_cmplx_mult_real_q15(
+ q15_t * pSrcCmplx,
+ q15_t * pSrcReal,
+ q15_t * pCmplxDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q31 complex-by-real multiplication
+ * @param[in] pSrcCmplx points to the complex input vector
+ * @param[in] pSrcReal points to the real input vector
+ * @param[out] pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ */
+ void arm_cmplx_mult_real_q31(
+ q31_t * pSrcCmplx,
+ q31_t * pSrcReal,
+ q31_t * pCmplxDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Floating-point complex-by-real multiplication
+ * @param[in] pSrcCmplx points to the complex input vector
+ * @param[in] pSrcReal points to the real input vector
+ * @param[out] pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ */
+ void arm_cmplx_mult_real_f32(
+ float32_t * pSrcCmplx,
+ float32_t * pSrcReal,
+ float32_t * pCmplxDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Minimum value of a Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] result is output pointer
+ * @param[in] index is the array index of the minimum value in the input buffer.
+ */
+ void arm_min_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * result,
+ uint32_t * index);
+
+
+ /**
+ * @brief Minimum value of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output pointer
+ * @param[in] pIndex is the array index of the minimum value in the input buffer.
+ */
+ void arm_min_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult,
+ uint32_t * pIndex);
+
+
+ /**
+ * @brief Minimum value of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output pointer
+ * @param[out] pIndex is the array index of the minimum value in the input buffer.
+ */
+ void arm_min_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult,
+ uint32_t * pIndex);
+
+
+ /**
+ * @brief Minimum value of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output pointer
+ * @param[out] pIndex is the array index of the minimum value in the input buffer.
+ */
+ void arm_min_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult,
+ uint32_t * pIndex);
+
+
+/**
+ * @brief Maximum value of a Q7 vector.
+ * @param[in] pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] pResult maximum value returned here
+ * @param[out] pIndex index of maximum value returned here
+ */
+ void arm_max_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * pResult,
+ uint32_t * pIndex);
+
+
+/**
+ * @brief Maximum value of a Q15 vector.
+ * @param[in] pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] pResult maximum value returned here
+ * @param[out] pIndex index of maximum value returned here
+ */
+ void arm_max_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult,
+ uint32_t * pIndex);
+
+
+/**
+ * @brief Maximum value of a Q31 vector.
+ * @param[in] pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] pResult maximum value returned here
+ * @param[out] pIndex index of maximum value returned here
+ */
+ void arm_max_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult,
+ uint32_t * pIndex);
+
+
+/**
+ * @brief Maximum value of a floating-point vector.
+ * @param[in] pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] pResult maximum value returned here
+ * @param[out] pIndex index of maximum value returned here
+ */
+ void arm_max_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult,
+ uint32_t * pIndex);
+
+
+ /**
+ * @brief Q15 complex-by-complex multiplication
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_mult_cmplx_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q31 complex-by-complex multiplication
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_mult_cmplx_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Floating-point complex-by-complex multiplication
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_mult_cmplx_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q31 vector.
+ * @param[in] pSrc points to the floating-point input vector
+ * @param[out] pDst points to the Q31 output vector
+ * @param[in] blockSize length of the input vector
+ */
+ void arm_float_to_q31(
+ float32_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q15 vector.
+ * @param[in] pSrc points to the floating-point input vector
+ * @param[out] pDst points to the Q15 output vector
+ * @param[in] blockSize length of the input vector
+ */
+ void arm_float_to_q15(
+ float32_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q7 vector.
+ * @param[in] pSrc points to the floating-point input vector
+ * @param[out] pDst points to the Q7 output vector
+ * @param[in] blockSize length of the input vector
+ */
+ void arm_float_to_q7(
+ float32_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q31 vector to Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q31_to_q15(
+ q31_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q31 vector to Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q31_to_q7(
+ q31_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q15 vector to floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q15_to_float(
+ q15_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q15 vector to Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q15_to_q31(
+ q15_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q15 vector to Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q15_to_q7(
+ q15_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @ingroup groupInterpolation
+ */
+
+ /**
+ * @defgroup BilinearInterpolate Bilinear Interpolation
+ *
+ * Bilinear interpolation is an extension of linear interpolation applied to a two dimensional grid.
+ * The underlying function f(x, y) is sampled on a regular grid and the interpolation process
+ * determines values between the grid points.
+ * Bilinear interpolation is equivalent to two step linear interpolation, first in the x-dimension and then in the y-dimension.
+ * Bilinear interpolation is often used in image processing to rescale images.
+ * The CMSIS DSP library provides bilinear interpolation functions for Q7, Q15, Q31, and floating-point data types.
+ *
+ * Algorithm
+ * \par
+ * The instance structure used by the bilinear interpolation functions describes a two dimensional data table.
+ * For floating-point, the instance structure is defined as:
+ *
+ * typedef struct
+ * {
+ * uint16_t numRows;
+ * uint16_t numCols;
+ * float32_t *pData;
+ * } arm_bilinear_interp_instance_f32;
+ *
+ *
+ * \par
+ * where numRows specifies the number of rows in the table;
+ * numCols specifies the number of columns in the table;
+ * and pData points to an array of size numRows*numCols values.
+ * The data table pTable is organized in row order and the supplied data values fall on integer indexes.
+ * That is, table element (x,y) is located at pTable[x + y*numCols] where x and y are integers.
+ *
+ * \par
+ * Let (x, y) specify the desired interpolation point. Then define:
+ *
+ * XF = floor(x)
+ * YF = floor(y)
+ *
+ * \par
+ * The interpolated output point is computed as:
+ *
+ * f(x, y) = f(XF, YF) * (1-(x-XF)) * (1-(y-YF))
+ * + f(XF+1, YF) * (x-XF)*(1-(y-YF))
+ * + f(XF, YF+1) * (1-(x-XF))*(y-YF)
+ * + f(XF+1, YF+1) * (x-XF)*(y-YF)
+ *
+ * Note that the coordinates (x, y) contain integer and fractional components.
+ * The integer components specify which portion of the table to use while the
+ * fractional components control the interpolation processor.
+ *
+ * \par
+ * if (x,y) are outside of the table boundary, Bilinear interpolation returns zero output.
+ */
+
+ /**
+ * @addtogroup BilinearInterpolate
+ * @{
+ */
+
+
+ /**
+ *
+ * @brief Floating-point bilinear interpolation.
+ * @param[in,out] S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate.
+ * @param[in] Y interpolation coordinate.
+ * @return out interpolated value.
+ */
+ static __INLINE float32_t arm_bilinear_interp_f32(
+ const arm_bilinear_interp_instance_f32 * S,
+ float32_t X,
+ float32_t Y)
+ {
+ float32_t out;
+ float32_t f00, f01, f10, f11;
+ float32_t *pData = S->pData;
+ int32_t xIndex, yIndex, index;
+ float32_t xdiff, ydiff;
+ float32_t b1, b2, b3, b4;
+
+ xIndex = (int32_t) X;
+ yIndex = (int32_t) Y;
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(xIndex < 0 || xIndex > (S->numRows - 1) || yIndex < 0 || yIndex > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* Calculation of index for two nearest points in X-direction */
+ index = (xIndex - 1) + (yIndex - 1) * S->numCols;
+
+
+ /* Read two nearest points in X-direction */
+ f00 = pData[index];
+ f01 = pData[index + 1];
+
+ /* Calculation of index for two nearest points in Y-direction */
+ index = (xIndex - 1) + (yIndex) * S->numCols;
+
+
+ /* Read two nearest points in Y-direction */
+ f10 = pData[index];
+ f11 = pData[index + 1];
+
+ /* Calculation of intermediate values */
+ b1 = f00;
+ b2 = f01 - f00;
+ b3 = f10 - f00;
+ b4 = f00 - f01 - f10 + f11;
+
+ /* Calculation of fractional part in X */
+ xdiff = X - xIndex;
+
+ /* Calculation of fractional part in Y */
+ ydiff = Y - yIndex;
+
+ /* Calculation of bi-linear interpolated output */
+ out = b1 + b2 * xdiff + b3 * ydiff + b4 * xdiff * ydiff;
+
+ /* return to application */
+ return (out);
+ }
+
+
+ /**
+ *
+ * @brief Q31 bilinear interpolation.
+ * @param[in,out] S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+ static __INLINE q31_t arm_bilinear_interp_q31(
+ arm_bilinear_interp_instance_q31 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q31_t out; /* Temporary output */
+ q31_t acc = 0; /* output */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ q31_t x1, x2, y1, y2; /* Nearest output values */
+ int32_t rI, cI; /* Row and column indices */
+ q31_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & (q31_t)0xFFF00000) >> 20);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & (q31_t)0xFFF00000) >> 20);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* shift left xfract by 11 to keep 1.31 format */
+ xfract = (X & 0x000FFFFF) << 11u;
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[(rI) + (int32_t)nCols * (cI) ];
+ x2 = pYData[(rI) + (int32_t)nCols * (cI) + 1];
+
+ /* 20 bits for the fractional part */
+ /* shift left yfract by 11 to keep 1.31 format */
+ yfract = (Y & 0x000FFFFF) << 11u;
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[(rI) + (int32_t)nCols * (cI + 1) ];
+ y2 = pYData[(rI) + (int32_t)nCols * (cI + 1) + 1];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 3.29(q29) format */
+ out = ((q31_t) (((q63_t) x1 * (0x7FFFFFFF - xfract)) >> 32));
+ acc = ((q31_t) (((q63_t) out * (0x7FFFFFFF - yfract)) >> 32));
+
+ /* x2 * (xfract) * (1-yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) x2 * (0x7FFFFFFF - yfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (xfract) >> 32));
+
+ /* y1 * (1 - xfract) * (yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) y1 * (0x7FFFFFFF - xfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
+
+ /* y2 * (xfract) * (yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) y2 * (xfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
+
+ /* Convert acc to 1.31(q31) format */
+ return ((q31_t)(acc << 2));
+ }
+
+
+ /**
+ * @brief Q15 bilinear interpolation.
+ * @param[in,out] S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+ static __INLINE q15_t arm_bilinear_interp_q15(
+ arm_bilinear_interp_instance_q15 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q63_t acc = 0; /* output */
+ q31_t out; /* Temporary output */
+ q15_t x1, x2, y1, y2; /* Nearest output values */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ int32_t rI, cI; /* Row and column indices */
+ q15_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & (q31_t)0xFFF00000) >> 20);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & (q31_t)0xFFF00000) >> 20);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* xfract should be in 12.20 format */
+ xfract = (X & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) ];
+ x2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) + 1];
+
+ /* 20 bits for the fractional part */
+ /* yfract should be in 12.20 format */
+ yfract = (Y & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) ];
+ y2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) + 1];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 13.51 format */
+
+ /* x1 is in 1.15(q15), xfract in 12.20 format and out is in 13.35 format */
+ /* convert 13.35 to 13.31 by right shifting and out is in 1.31 */
+ out = (q31_t) (((q63_t) x1 * (0xFFFFF - xfract)) >> 4u);
+ acc = ((q63_t) out * (0xFFFFF - yfract));
+
+ /* x2 * (xfract) * (1-yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) x2 * (0xFFFFF - yfract)) >> 4u);
+ acc += ((q63_t) out * (xfract));
+
+ /* y1 * (1 - xfract) * (yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) y1 * (0xFFFFF - xfract)) >> 4u);
+ acc += ((q63_t) out * (yfract));
+
+ /* y2 * (xfract) * (yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) y2 * (xfract)) >> 4u);
+ acc += ((q63_t) out * (yfract));
+
+ /* acc is in 13.51 format and down shift acc by 36 times */
+ /* Convert out to 1.15 format */
+ return ((q15_t)(acc >> 36));
+ }
+
+
+ /**
+ * @brief Q7 bilinear interpolation.
+ * @param[in,out] S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+ static __INLINE q7_t arm_bilinear_interp_q7(
+ arm_bilinear_interp_instance_q7 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q63_t acc = 0; /* output */
+ q31_t out; /* Temporary output */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ q7_t x1, x2, y1, y2; /* Nearest output values */
+ int32_t rI, cI; /* Row and column indices */
+ q7_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & (q31_t)0xFFF00000) >> 20);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & (q31_t)0xFFF00000) >> 20);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* xfract should be in 12.20 format */
+ xfract = (X & (q31_t)0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) ];
+ x2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) + 1];
+
+ /* 20 bits for the fractional part */
+ /* yfract should be in 12.20 format */
+ yfract = (Y & (q31_t)0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) ];
+ y2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) + 1];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 16.47 format */
+ out = ((x1 * (0xFFFFF - xfract)));
+ acc = (((q63_t) out * (0xFFFFF - yfract)));
+
+ /* x2 * (xfract) * (1-yfract) in 2.22 and adding to acc */
+ out = ((x2 * (0xFFFFF - yfract)));
+ acc += (((q63_t) out * (xfract)));
+
+ /* y1 * (1 - xfract) * (yfract) in 2.22 and adding to acc */
+ out = ((y1 * (0xFFFFF - xfract)));
+ acc += (((q63_t) out * (yfract)));
+
+ /* y2 * (xfract) * (yfract) in 2.22 and adding to acc */
+ out = ((y2 * (yfract)));
+ acc += (((q63_t) out * (xfract)));
+
+ /* acc in 16.47 format and down shift by 40 to convert to 1.7 format */
+ return ((q7_t)(acc >> 40));
+ }
+
+ /**
+ * @} end of BilinearInterpolate group
+ */
+
+
+/* SMMLAR */
+#define multAcc_32x32_keep32_R(a, x, y) \
+ a = (q31_t) (((((q63_t) a) << 32) + ((q63_t) x * y) + 0x80000000LL ) >> 32)
+
+/* SMMLSR */
+#define multSub_32x32_keep32_R(a, x, y) \
+ a = (q31_t) (((((q63_t) a) << 32) - ((q63_t) x * y) + 0x80000000LL ) >> 32)
+
+/* SMMULR */
+#define mult_32x32_keep32_R(a, x, y) \
+ a = (q31_t) (((q63_t) x * y + 0x80000000LL ) >> 32)
+
+/* SMMLA */
+#define multAcc_32x32_keep32(a, x, y) \
+ a += (q31_t) (((q63_t) x * y) >> 32)
+
+/* SMMLS */
+#define multSub_32x32_keep32(a, x, y) \
+ a -= (q31_t) (((q63_t) x * y) >> 32)
+
+/* SMMUL */
+#define mult_32x32_keep32(a, x, y) \
+ a = (q31_t) (((q63_t) x * y ) >> 32)
+
+
+#if defined ( __CC_ARM )
+ /* Enter low optimization region - place directly above function definition */
+ #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
+ #define LOW_OPTIMIZATION_ENTER \
+ _Pragma ("push") \
+ _Pragma ("O1")
+ #else
+ #define LOW_OPTIMIZATION_ENTER
+ #endif
+
+ /* Exit low optimization region - place directly after end of function definition */
+ #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
+ #define LOW_OPTIMIZATION_EXIT \
+ _Pragma ("pop")
+ #else
+ #define LOW_OPTIMIZATION_EXIT
+ #endif
+
+ /* Enter low optimization region - place directly above function definition */
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+
+ /* Exit low optimization region - place directly after end of function definition */
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define LOW_OPTIMIZATION_ENTER
+ #define LOW_OPTIMIZATION_EXIT
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__GNUC__)
+ #define LOW_OPTIMIZATION_ENTER __attribute__(( optimize("-O1") ))
+ #define LOW_OPTIMIZATION_EXIT
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__ICCARM__)
+ /* Enter low optimization region - place directly above function definition */
+ #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
+ #define LOW_OPTIMIZATION_ENTER \
+ _Pragma ("optimize=low")
+ #else
+ #define LOW_OPTIMIZATION_ENTER
+ #endif
+
+ /* Exit low optimization region - place directly after end of function definition */
+ #define LOW_OPTIMIZATION_EXIT
+
+ /* Enter low optimization region - place directly above function definition */
+ #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER \
+ _Pragma ("optimize=low")
+ #else
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #endif
+
+ /* Exit low optimization region - place directly after end of function definition */
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__CSMC__)
+ #define LOW_OPTIMIZATION_ENTER
+ #define LOW_OPTIMIZATION_EXIT
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__TASKING__)
+ #define LOW_OPTIMIZATION_ENTER
+ #define LOW_OPTIMIZATION_EXIT
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#if defined ( __GNUC__ )
+#pragma GCC diagnostic pop
+#endif
+
+#endif /* _ARM_MATH_H */
+
+/**
+ *
+ * End of file.
+ */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/cmsis_armcc.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/cmsis_armcc.h
new file mode 100644
index 00000000..74c49c67
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/cmsis_armcc.h
@@ -0,0 +1,734 @@
+/**************************************************************************//**
+ * @file cmsis_armcc.h
+ * @brief CMSIS Cortex-M Core Function/Instruction Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CMSIS_ARMCC_H
+#define __CMSIS_ARMCC_H
+
+
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/**
+ \brief Get Control Register
+ \details Returns the content of the Control Register.
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/**
+ \brief Set Control Register
+ \details Writes the given value to the Control Register.
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/**
+ \brief Get IPSR Register
+ \details Returns the content of the IPSR Register.
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/**
+ \brief Get APSR Register
+ \details Returns the content of the APSR Register.
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/**
+ \brief Get xPSR Register
+ \details Returns the content of the xPSR Register.
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/**
+ \brief Get Process Stack Pointer
+ \details Returns the current value of the Process Stack Pointer (PSP).
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/**
+ \brief Set Process Stack Pointer
+ \details Assigns the given value to the Process Stack Pointer (PSP).
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/**
+ \brief Get Main Stack Pointer
+ \details Returns the current value of the Main Stack Pointer (MSP).
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/**
+ \brief Set Main Stack Pointer
+ \details Assigns the given value to the Main Stack Pointer (MSP).
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/**
+ \brief Get Priority Mask
+ \details Returns the current state of the priority mask bit from the Priority Mask Register.
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/**
+ \brief Set Priority Mask
+ \details Assigns the given value to the Priority Mask Register.
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+
+/**
+ \brief Enable FIQ
+ \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/**
+ \brief Disable FIQ
+ \details Disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/**
+ \brief Get Base Priority
+ \details Returns the current value of the Base Priority register.
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/**
+ \brief Set Base Priority
+ \details Assigns the given value to the Base Priority register.
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xFFU);
+}
+
+
+/**
+ \brief Set Base Priority with condition
+ \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+ or the new value increases the BASEPRI priority level.
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri)
+{
+ register uint32_t __regBasePriMax __ASM("basepri_max");
+ __regBasePriMax = (basePri & 0xFFU);
+}
+
+
+/**
+ \brief Get Fault Mask
+ \details Returns the current value of the Fault Mask register.
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/**
+ \brief Set Fault Mask
+ \details Assigns the given value to the Fault Mask register.
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
+
+
+#if (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U)
+
+/**
+ \brief Get FPSCR
+ \details Returns the current value of the Floating Point Status/Control register.
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0U);
+#endif
+}
+
+
+/**
+ \brief Set FPSCR
+ \details Assigns the given value to the Floating Point Status/Control register.
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) */
+
+
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+/**
+ \brief No Operation
+ \details No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/**
+ \brief Wait For Interrupt
+ \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/**
+ \brief Wait For Event
+ \details Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/**
+ \brief Send Event
+ \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/**
+ \brief Instruction Synchronization Barrier
+ \details Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or memory,
+ after the instruction has been completed.
+ */
+#define __ISB() do {\
+ __schedule_barrier();\
+ __isb(0xF);\
+ __schedule_barrier();\
+ } while (0U)
+
+/**
+ \brief Data Synchronization Barrier
+ \details Acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() do {\
+ __schedule_barrier();\
+ __dsb(0xF);\
+ __schedule_barrier();\
+ } while (0U)
+
+/**
+ \brief Data Memory Barrier
+ \details Ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() do {\
+ __schedule_barrier();\
+ __dmb(0xF);\
+ __schedule_barrier();\
+ } while (0U)
+
+/**
+ \brief Reverse byte order (32 bit)
+ \details Reverses the byte order in integer value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/**
+ \brief Reverse byte order (16 bit)
+ \details Reverses the byte order in two unsigned short values.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/**
+ \brief Reverse byte order in signed short value
+ \details Reverses the byte order in a signed short value with sign extension to integer.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/**
+ \brief Rotate Right in unsigned value (32 bit)
+ \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/**
+ \brief Breakpoint
+ \details Causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+/**
+ \brief Reverse bit order of value
+ \details Reverses the bit order of the given value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+ #define __RBIT __rbit
+#else
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+ int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
+
+ result = value; /* r will be reversed bits of v; first get LSB of v */
+ for (value >>= 1U; value; value >>= 1U)
+ {
+ result <<= 1U;
+ result |= value & 1U;
+ s--;
+ }
+ result <<= s; /* shift when v's highest bits are zero */
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Count leading zeros
+ \details Counts the number of leading zeros of a data value.
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+
+/**
+ \brief LDR Exclusive (8 bit)
+ \details Executes a exclusive LDR instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+#else
+ #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop")
+#endif
+
+
+/**
+ \brief LDR Exclusive (16 bit)
+ \details Executes a exclusive LDR instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+#else
+ #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop")
+#endif
+
+
+/**
+ \brief LDR Exclusive (32 bit)
+ \details Executes a exclusive LDR instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+#else
+ #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop")
+#endif
+
+
+/**
+ \brief STR Exclusive (8 bit)
+ \details Executes a exclusive STR instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __STREXB(value, ptr) __strex(value, ptr)
+#else
+ #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
+#endif
+
+
+/**
+ \brief STR Exclusive (16 bit)
+ \details Executes a exclusive STR instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __STREXH(value, ptr) __strex(value, ptr)
+#else
+ #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
+#endif
+
+
+/**
+ \brief STR Exclusive (32 bit)
+ \details Executes a exclusive STR instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __STREXW(value, ptr) __strex(value, ptr)
+#else
+ #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
+#endif
+
+
+/**
+ \brief Remove the exclusive lock
+ \details Removes the exclusive lock which is created by LDREX.
+ */
+#define __CLREX __clrex
+
+
+/**
+ \brief Signed Saturate
+ \details Saturates a signed value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/**
+ \brief Unsigned Saturate
+ \details Saturates an unsigned value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/**
+ \brief Rotate Right with Extend (32 bit)
+ \details Moves each bit of a bitstring right by one bit.
+ The carry input is shifted in at the left end of the bitstring.
+ \param [in] value Value to rotate
+ \return Rotated value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
+{
+ rrx r0, r0
+ bx lr
+}
+#endif
+
+
+/**
+ \brief LDRT Unprivileged (8 bit)
+ \details Executes a Unprivileged LDRT instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr))
+
+
+/**
+ \brief LDRT Unprivileged (16 bit)
+ \details Executes a Unprivileged LDRT instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr))
+
+
+/**
+ \brief LDRT Unprivileged (32 bit)
+ \details Executes a Unprivileged LDRT instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr))
+
+
+/**
+ \brief STRT Unprivileged (8 bit)
+ \details Executes a Unprivileged STRT instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRBT(value, ptr) __strt(value, ptr)
+
+
+/**
+ \brief STRT Unprivileged (16 bit)
+ \details Executes a Unprivileged STRT instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRHT(value, ptr) __strt(value, ptr)
+
+
+/**
+ \brief STRT Unprivileged (32 bit)
+ \details Executes a Unprivileged STRT instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRT(value, ptr) __strt(value, ptr)
+
+#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if (__CORTEX_M >= 0x04U) /* only for Cortex-M4 and above */
+
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32U) ) >> 32U))
+
+#endif /* (__CORTEX_M >= 0x04) */
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CMSIS_ARMCC_H */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/cmsis_armcc_V6.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/cmsis_armcc_V6.h
new file mode 100644
index 00000000..cd13240c
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/cmsis_armcc_V6.h
@@ -0,0 +1,1800 @@
+/**************************************************************************//**
+ * @file cmsis_armcc_V6.h
+ * @brief CMSIS Cortex-M Core Function/Instruction Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CMSIS_ARMCC_V6_H
+#define __CMSIS_ARMCC_V6_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+/**
+ \brief Enable IRQ Interrupts
+ \details Enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/**
+ \brief Disable IRQ Interrupts
+ \details Disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/**
+ \brief Get Control Register
+ \details Returns the content of the Control Register.
+ \return Control Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Control Register (non-secure)
+ \details Returns the content of the non-secure Control Register when in secure mode.
+ \return non-secure Control Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_CONTROL_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Control Register
+ \details Writes the given value to the Control Register.
+ \param [in] control Control Register value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Control Register (non-secure)
+ \details Writes the given value to the non-secure Control Register when in secure state.
+ \param [in] control Control Register value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_CONTROL_NS(uint32_t control)
+{
+ __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory");
+}
+#endif
+
+
+/**
+ \brief Get IPSR Register
+ \details Returns the content of the IPSR Register.
+ \return IPSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get IPSR Register (non-secure)
+ \details Returns the content of the non-secure IPSR Register when in secure state.
+ \return IPSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_IPSR_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Get APSR Register
+ \details Returns the content of the APSR Register.
+ \return APSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get APSR Register (non-secure)
+ \details Returns the content of the non-secure APSR Register when in secure state.
+ \return APSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_APSR_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Get xPSR Register
+ \details Returns the content of the xPSR Register.
+ \return xPSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get xPSR Register (non-secure)
+ \details Returns the content of the non-secure xPSR Register when in secure state.
+ \return xPSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_xPSR_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Get Process Stack Pointer
+ \details Returns the current value of the Process Stack Pointer (PSP).
+ \return PSP Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Process Stack Pointer (non-secure)
+ \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state.
+ \return PSP Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PSP_NS(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Process Stack Pointer
+ \details Assigns the given value to the Process Stack Pointer (PSP).
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : "sp");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Process Stack Pointer (non-secure)
+ \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state.
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : "sp");
+}
+#endif
+
+
+/**
+ \brief Get Main Stack Pointer
+ \details Returns the current value of the Main Stack Pointer (MSP).
+ \return MSP Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Main Stack Pointer (non-secure)
+ \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state.
+ \return MSP Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_MSP_NS(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Main Stack Pointer
+ \details Assigns the given value to the Main Stack Pointer (MSP).
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : "sp");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Main Stack Pointer (non-secure)
+ \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state.
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : "sp");
+}
+#endif
+
+
+/**
+ \brief Get Priority Mask
+ \details Returns the current state of the priority mask bit from the Priority Mask Register.
+ \return Priority Mask value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Priority Mask (non-secure)
+ \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state.
+ \return Priority Mask value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PRIMASK_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Priority Mask
+ \details Assigns the given value to the Priority Mask Register.
+ \param [in] priMask Priority Mask
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Priority Mask (non-secure)
+ \details Assigns the given value to the non-secure Priority Mask Register when in secure state.
+ \param [in] priMask Priority Mask
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PRIMASK_NS(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory");
+}
+#endif
+
+
+#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */
+
+/**
+ \brief Enable FIQ
+ \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/**
+ \brief Disable FIQ
+ \details Disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/**
+ \brief Get Base Priority
+ \details Returns the current value of the Base Priority register.
+ \return Base Priority register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Base Priority (non-secure)
+ \details Returns the current value of the non-secure Base Priority register when in secure state.
+ \return Base Priority register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_BASEPRI_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Base Priority
+ \details Assigns the given value to the Base Priority register.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Base Priority (non-secure)
+ \details Assigns the given value to the non-secure Base Priority register when in secure state.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_BASEPRI_NS(uint32_t value)
+{
+ __ASM volatile ("MSR basepri_ns, %0" : : "r" (value) : "memory");
+}
+#endif
+
+
+/**
+ \brief Set Base Priority with condition
+ \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+ or the new value increases the BASEPRI priority level.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value)
+{
+ __ASM volatile ("MSR basepri_max, %0" : : "r" (value) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Base Priority with condition (non_secure)
+ \details Assigns the given value to the non-secure Base Priority register when in secure state only if BASEPRI masking is disabled,
+ or the new value increases the BASEPRI priority level.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_BASEPRI_MAX_NS(uint32_t value)
+{
+ __ASM volatile ("MSR basepri_max_ns, %0" : : "r" (value) : "memory");
+}
+#endif
+
+
+/**
+ \brief Get Fault Mask
+ \details Returns the current value of the Fault Mask register.
+ \return Fault Mask register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Fault Mask (non-secure)
+ \details Returns the current value of the non-secure Fault Mask register when in secure state.
+ \return Fault Mask register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_FAULTMASK_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Fault Mask
+ \details Assigns the given value to the Fault Mask register.
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Fault Mask (non-secure)
+ \details Assigns the given value to the non-secure Fault Mask register when in secure state.
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory");
+}
+#endif
+
+
+#endif /* ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */
+
+
+#if (__ARM_ARCH_8M__ == 1U)
+
+/**
+ \brief Get Process Stack Pointer Limit
+ \details Returns the current value of the Process Stack Pointer Limit (PSPLIM).
+ \return PSPLIM Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSPLIM(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psplim" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
+/**
+ \brief Get Process Stack Pointer Limit (non-secure)
+ \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state.
+ \return PSPLIM Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PSPLIM_NS(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Process Stack Pointer Limit
+ \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM).
+ \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit)
+{
+ __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit));
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
+/**
+ \brief Set Process Stack Pointer (non-secure)
+ \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state.
+ \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit)
+{
+ __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit));
+}
+#endif
+
+
+/**
+ \brief Get Main Stack Pointer Limit
+ \details Returns the current value of the Main Stack Pointer Limit (MSPLIM).
+ \return MSPLIM Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSPLIM(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msplim" : "=r" (result) );
+
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
+/**
+ \brief Get Main Stack Pointer Limit (non-secure)
+ \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state.
+ \return MSPLIM Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_MSPLIM_NS(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Main Stack Pointer Limit
+ \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM).
+ \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_MSPLIM(uint32_t MainStackPtrLimit)
+{
+ __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit));
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
+/**
+ \brief Set Main Stack Pointer Limit (non-secure)
+ \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state.
+ \param [in] MainStackPtrLimit Main Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit)
+{
+ __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit));
+}
+#endif
+
+#endif /* (__ARM_ARCH_8M__ == 1U) */
+
+
+#if ((__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=4 */
+
+/**
+ \brief Get FPSCR
+ \details eturns the current value of the Floating Point Status/Control register.
+ \return Floating Point Status/Control register value
+ */
+#define __get_FPSCR __builtin_arm_get_fpscr
+#if 0
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ uint32_t result;
+
+ __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+#endif
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get FPSCR (non-secure)
+ \details Returns the current value of the non-secure Floating Point Status/Control register when in secure state.
+ \return Floating Point Status/Control register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_FPSCR_NS(void)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ uint32_t result;
+
+ __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("VMRS %0, fpscr_ns" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+#endif
+
+
+/**
+ \brief Set FPSCR
+ \details Assigns the given value to the Floating Point Status/Control register.
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+#define __set_FPSCR __builtin_arm_set_fpscr
+#if 0
+__attribute__((always_inline)) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+#endif
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set FPSCR (non-secure)
+ \details Assigns the given value to the non-secure Floating Point Status/Control register when in secure state.
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_FPSCR_NS(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("VMSR fpscr_ns, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+#endif
+
+#endif /* ((__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */
+
+
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constraint "l"
+ * Otherwise, use general registers, specified by constraint "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/**
+ \brief No Operation
+ \details No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __builtin_arm_nop
+
+/**
+ \brief Wait For Interrupt
+ \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
+ */
+#define __WFI __builtin_arm_wfi
+
+
+/**
+ \brief Wait For Event
+ \details Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __builtin_arm_wfe
+
+
+/**
+ \brief Send Event
+ \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __builtin_arm_sev
+
+
+/**
+ \brief Instruction Synchronization Barrier
+ \details Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or memory,
+ after the instruction has been completed.
+ */
+#define __ISB() __builtin_arm_isb(0xF);
+
+/**
+ \brief Data Synchronization Barrier
+ \details Acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __builtin_arm_dsb(0xF);
+
+
+/**
+ \brief Data Memory Barrier
+ \details Ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __builtin_arm_dmb(0xF);
+
+
+/**
+ \brief Reverse byte order (32 bit)
+ \details Reverses the byte order in integer value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __builtin_bswap32
+
+
+/**
+ \brief Reverse byte order (16 bit)
+ \details Reverses the byte order in two unsigned short values.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV16 __builtin_bswap16 /* ToDo: ARMCC_V6: check if __builtin_bswap16 could be used */
+#if 0
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Reverse byte order in signed short value
+ \details Reverses the byte order in a signed short value with sign extension to integer.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+ /* ToDo: ARMCC_V6: check if __builtin_bswap16 could be used */
+__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+ int32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/**
+ \brief Rotate Right in unsigned value (32 bit)
+ \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+ \param [in] op1 Value to rotate
+ \param [in] op2 Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32U - op2));
+}
+
+
+/**
+ \brief Breakpoint
+ \details Causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+/**
+ \brief Reverse bit order of value
+ \details Reverses the bit order of the given value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+ /* ToDo: ARMCC_V6: check if __builtin_arm_rbit is supported */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+#else
+ int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
+
+ result = value; /* r will be reversed bits of v; first get LSB of v */
+ for (value >>= 1U; value; value >>= 1U)
+ {
+ result <<= 1U;
+ result |= value & 1U;
+ s--;
+ }
+ result <<= s; /* shift when v's highest bits are zero */
+#endif
+ return(result);
+}
+
+
+/**
+ \brief Count leading zeros
+ \details Counts the number of leading zeros of a data value.
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __builtin_clz
+
+
+#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */
+
+/**
+ \brief LDR Exclusive (8 bit)
+ \details Executes a exclusive LDR instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB (uint8_t)__builtin_arm_ldrex
+
+
+/**
+ \brief LDR Exclusive (16 bit)
+ \details Executes a exclusive LDR instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH (uint16_t)__builtin_arm_ldrex
+
+
+/**
+ \brief LDR Exclusive (32 bit)
+ \details Executes a exclusive LDR instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW (uint32_t)__builtin_arm_ldrex
+
+
+/**
+ \brief STR Exclusive (8 bit)
+ \details Executes a exclusive STR instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB (uint32_t)__builtin_arm_strex
+
+
+/**
+ \brief STR Exclusive (16 bit)
+ \details Executes a exclusive STR instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH (uint32_t)__builtin_arm_strex
+
+
+/**
+ \brief STR Exclusive (32 bit)
+ \details Executes a exclusive STR instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW (uint32_t)__builtin_arm_strex
+
+
+/**
+ \brief Remove the exclusive lock
+ \details Removes the exclusive lock which is created by LDREX.
+ */
+#define __CLREX __builtin_arm_clrex
+
+
+/**
+ \brief Signed Saturate
+ \details Saturates a signed value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+/*#define __SSAT __builtin_arm_ssat*/
+#define __SSAT(ARG1,ARG2) \
+({ \
+ int32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/**
+ \brief Unsigned Saturate
+ \details Saturates an unsigned value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __builtin_arm_usat
+#if 0
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+#endif
+
+
+/**
+ \brief Rotate Right with Extend (32 bit)
+ \details Moves each bit of a bitstring right by one bit.
+ The carry input is shifted in at the left end of the bitstring.
+ \param [in] value Value to rotate
+ \return Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/**
+ \brief LDRT Unprivileged (8 bit)
+ \details Executes a Unprivileged LDRT instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDRT Unprivileged (16 bit)
+ \details Executes a Unprivileged LDRT instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return ((uint16_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDRT Unprivileged (32 bit)
+ \details Executes a Unprivileged LDRT instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return(result);
+}
+
+
+/**
+ \brief STRT Unprivileged (8 bit)
+ \details Executes a Unprivileged STRT instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *ptr)
+{
+ __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief STRT Unprivileged (16 bit)
+ \details Executes a Unprivileged STRT instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *ptr)
+{
+ __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief STRT Unprivileged (32 bit)
+ \details Executes a Unprivileged STRT instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *ptr)
+{
+ __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) );
+}
+
+#endif /* ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */
+
+
+#if (__ARM_ARCH_8M__ == 1U)
+
+/**
+ \brief Load-Acquire (8 bit)
+ \details Executes a LDAB instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDAB(volatile uint8_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return ((uint8_t) result);
+}
+
+
+/**
+ \brief Load-Acquire (16 bit)
+ \details Executes a LDAH instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDAH(volatile uint16_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return ((uint16_t) result);
+}
+
+
+/**
+ \brief Load-Acquire (32 bit)
+ \details Executes a LDA instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDA(volatile uint32_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return(result);
+}
+
+
+/**
+ \brief Store-Release (8 bit)
+ \details Executes a STLB instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STLB(uint8_t value, volatile uint8_t *ptr)
+{
+ __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief Store-Release (16 bit)
+ \details Executes a STLH instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STLH(uint16_t value, volatile uint16_t *ptr)
+{
+ __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief Store-Release (32 bit)
+ \details Executes a STL instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STL(uint32_t value, volatile uint32_t *ptr)
+{
+ __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief Load-Acquire Exclusive (8 bit)
+ \details Executes a LDAB exclusive instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDAEXB (uint8_t)__builtin_arm_ldaex
+
+
+/**
+ \brief Load-Acquire Exclusive (16 bit)
+ \details Executes a LDAH exclusive instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDAEXH (uint16_t)__builtin_arm_ldaex
+
+
+/**
+ \brief Load-Acquire Exclusive (32 bit)
+ \details Executes a LDA exclusive instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDAEX (uint32_t)__builtin_arm_ldaex
+
+
+/**
+ \brief Store-Release Exclusive (8 bit)
+ \details Executes a STLB exclusive instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STLEXB (uint32_t)__builtin_arm_stlex
+
+
+/**
+ \brief Store-Release Exclusive (16 bit)
+ \details Executes a STLH exclusive instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STLEXH (uint32_t)__builtin_arm_stlex
+
+
+/**
+ \brief Store-Release Exclusive (32 bit)
+ \details Executes a STL exclusive instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STLEX (uint32_t)__builtin_arm_stlex
+
+#endif /* (__ARM_ARCH_8M__ == 1U) */
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if (__ARM_FEATURE_DSP == 1U) /* ToDo: ARMCC_V6: This should be ARCH >= ARMv7-M + SIMD */
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE int32_t __QADD( int32_t op1, int32_t op2)
+{
+ int32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE int32_t __QSUB( int32_t op1, int32_t op2)
+{
+ int32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#endif /* (__ARM_FEATURE_DSP == 1U) */
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CMSIS_ARMCC_V6_H */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/cmsis_gcc.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/cmsis_gcc.h
new file mode 100644
index 00000000..bb89fbba
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/cmsis_gcc.h
@@ -0,0 +1,1373 @@
+/**************************************************************************//**
+ * @file cmsis_gcc.h
+ * @brief CMSIS Cortex-M Core Function/Instruction Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CMSIS_GCC_H
+#define __CMSIS_GCC_H
+
+/* ignore some GCC warnings */
+#if defined ( __GNUC__ )
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wsign-conversion"
+#pragma GCC diagnostic ignored "-Wconversion"
+#pragma GCC diagnostic ignored "-Wunused-parameter"
+#endif
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+/**
+ \brief Enable IRQ Interrupts
+ \details Enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/**
+ \brief Disable IRQ Interrupts
+ \details Disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/**
+ \brief Get Control Register
+ \details Returns the content of the Control Register.
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Control Register
+ \details Writes the given value to the Control Register.
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/**
+ \brief Get IPSR Register
+ \details Returns the content of the IPSR Register.
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Get APSR Register
+ \details Returns the content of the APSR Register.
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Get xPSR Register
+ \details Returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Get Process Stack Pointer
+ \details Returns the current value of the Process Stack Pointer (PSP).
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Process Stack Pointer
+ \details Assigns the given value to the Process Stack Pointer (PSP).
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/**
+ \brief Get Main Stack Pointer
+ \details Returns the current value of the Main Stack Pointer (MSP).
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Main Stack Pointer
+ \details Assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/**
+ \brief Get Priority Mask
+ \details Returns the current state of the priority mask bit from the Priority Mask Register.
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Priority Mask
+ \details Assigns the given value to the Priority Mask Register.
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03U)
+
+/**
+ \brief Enable FIQ
+ \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/**
+ \brief Disable FIQ
+ \details Disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/**
+ \brief Get Base Priority
+ \details Returns the current value of the Base Priority register.
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Base Priority
+ \details Assigns the given value to the Base Priority register.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/**
+ \brief Set Base Priority with condition
+ \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+ or the new value increases the BASEPRI priority level.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value)
+{
+ __ASM volatile ("MSR basepri_max, %0" : : "r" (value) : "memory");
+}
+
+
+/**
+ \brief Get Fault Mask
+ \details Returns the current value of the Fault Mask register.
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Fault Mask
+ \details Assigns the given value to the Fault Mask register.
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03U) */
+
+
+#if (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U)
+
+/**
+ \brief Get FPSCR
+ \details Returns the current value of the Floating Point Status/Control register.
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/**
+ \brief Set FPSCR
+ \details Assigns the given value to the Floating Point Status/Control register.
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) */
+
+
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constraint "l"
+ * Otherwise, use general registers, specified by constraint "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/**
+ \brief No Operation
+ \details No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/**
+ \brief Wait For Interrupt
+ \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/**
+ \brief Wait For Event
+ \details Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/**
+ \brief Send Event
+ \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/**
+ \brief Instruction Synchronization Barrier
+ \details Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or memory,
+ after the instruction has been completed.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb 0xF":::"memory");
+}
+
+
+/**
+ \brief Data Synchronization Barrier
+ \details Acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb 0xF":::"memory");
+}
+
+
+/**
+ \brief Data Memory Barrier
+ \details Ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb 0xF":::"memory");
+}
+
+
+/**
+ \brief Reverse byte order (32 bit)
+ \details Reverses the byte order in integer value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/**
+ \brief Reverse byte order (16 bit)
+ \details Reverses the byte order in two unsigned short values.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/**
+ \brief Reverse byte order in signed short value
+ \details Reverses the byte order in a signed short value with sign extension to integer.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ int32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/**
+ \brief Rotate Right in unsigned value (32 bit)
+ \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32U - op2));
+}
+
+
+/**
+ \brief Breakpoint
+ \details Causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+/**
+ \brief Reverse bit order of value
+ \details Reverses the bit order of the given value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+#else
+ int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
+
+ result = value; /* r will be reversed bits of v; first get LSB of v */
+ for (value >>= 1U; value; value >>= 1U)
+ {
+ result <<= 1U;
+ result |= value & 1U;
+ s--;
+ }
+ result <<= s; /* shift when v's highest bits are zero */
+#endif
+ return(result);
+}
+
+
+/**
+ \brief Count leading zeros
+ \details Counts the number of leading zeros of a data value.
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __builtin_clz
+
+
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+
+/**
+ \brief LDR Exclusive (8 bit)
+ \details Executes a exclusive LDR instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDR Exclusive (16 bit)
+ \details Executes a exclusive LDR instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint16_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDR Exclusive (32 bit)
+ \details Executes a exclusive LDR instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/**
+ \brief STR Exclusive (8 bit)
+ \details Executes a exclusive STR instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+ return(result);
+}
+
+
+/**
+ \brief STR Exclusive (16 bit)
+ \details Executes a exclusive STR instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+ return(result);
+}
+
+
+/**
+ \brief STR Exclusive (32 bit)
+ \details Executes a exclusive STR instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/**
+ \brief Remove the exclusive lock
+ \details Removes the exclusive lock which is created by LDREX.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/**
+ \brief Signed Saturate
+ \details Saturates a signed value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/**
+ \brief Unsigned Saturate
+ \details Saturates an unsigned value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/**
+ \brief Rotate Right with Extend (32 bit)
+ \details Moves each bit of a bitstring right by one bit.
+ The carry input is shifted in at the left end of the bitstring.
+ \param [in] value Value to rotate
+ \return Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/**
+ \brief LDRT Unprivileged (8 bit)
+ \details Executes a Unprivileged LDRT instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDRT Unprivileged (16 bit)
+ \details Executes a Unprivileged LDRT instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint16_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDRT Unprivileged (32 bit)
+ \details Executes a Unprivileged LDRT instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/**
+ \brief STRT Unprivileged (8 bit)
+ \details Executes a Unprivileged STRT instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *addr)
+{
+ __ASM volatile ("strbt %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief STRT Unprivileged (16 bit)
+ \details Executes a Unprivileged STRT instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *addr)
+{
+ __ASM volatile ("strht %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief STRT Unprivileged (32 bit)
+ \details Executes a Unprivileged STRT instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *addr)
+{
+ __ASM volatile ("strt %1, %0" : "=Q" (*addr) : "r" (value) );
+}
+
+#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if (__CORTEX_M >= 0x04U) /* only for Cortex-M4 and above */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ int32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __QADD( int32_t op1, int32_t op2)
+{
+ int32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __QSUB( int32_t op1, int32_t op2)
+{
+ int32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x04) */
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#if defined ( __GNUC__ )
+#pragma GCC diagnostic pop
+#endif
+
+#endif /* __CMSIS_GCC_H */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cm0.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cm0.h
new file mode 100644
index 00000000..711dad55
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cm0.h
@@ -0,0 +1,798 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000U
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:1; /*!< bit: 0 Reserved */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31U];
+ __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31U];
+ __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31U];
+ __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31U];
+ uint32_t RESERVED4[64U];
+ __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+ Therefore they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
+#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
+#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+ else
+ {
+ NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device.h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cm0plus.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cm0plus.h
new file mode 100644
index 00000000..b04aa390
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cm0plus.h
@@ -0,0 +1,914 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0+ definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \
+ __CM0PLUS_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000U
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0U
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31U];
+ __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31U];
+ __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31U];
+ __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31U];
+ uint32_t RESERVED4[64U];
+ __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1U)
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1U)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+ Therefore they are not covered by the Cortex-M0+ header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
+#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
+#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+ else
+ {
+ NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device.h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cm3.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cm3.h
new file mode 100644
index 00000000..b4ac4c7b
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cm3.h
@@ -0,0 +1,1763 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200U
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27U /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24U];
+ __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24U];
+ __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24U];
+ __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24U];
+ __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56U];
+ __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644U];
+ __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5U];
+ __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201U) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200U))
+ __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1U];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __OM union
+ {
+ __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864U];
+ __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15U];
+ __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15U];
+ __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29U];
+ __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6U];
+ __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1U];
+ __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1U];
+ __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55U];
+ __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131U];
+ __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759U];
+ __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1U];
+ __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39U];
+ __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8U];
+ __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/**
+ \brief Set Priority Grouping
+ \details Sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/**
+ \brief Get Priority Grouping
+ \details Reads the priority grouping field from the NVIC Interrupt Controller.
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Active Interrupt
+ \details Reads the active register in NVIC and returns the active bit.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else
+ {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief Encode Priority
+ \details Encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/**
+ \brief Decode Priority
+ \details Decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device.h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+ \brief ITM Send Character
+ \details Transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+ \param [in] ch Character to transmit.
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0U].u32 == 0UL)
+ {
+ __NOP();
+ }
+ ITM->PORT[0U].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/**
+ \brief ITM Receive Character
+ \details Inputs a character via the external variable \ref ITM_RxBuffer.
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+ {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/**
+ \brief ITM Check Character
+ \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+ {
+ return (0); /* no character available */
+ }
+ else
+ {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cm4.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cm4.h
new file mode 100644
index 00000000..dc840ebf
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cm4.h
@@ -0,0 +1,1937 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16U) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1U
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+#include "core_cmSimd.h" /* Compiler specific SIMD Intrinsics */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000U
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0U
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27U /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+#define APSR_GE_Pos 16U /*!< APSR: GE Position */
+#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */
+#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */
+#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */
+
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24U];
+ __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24U];
+ __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24U];
+ __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24U];
+ __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56U];
+ __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644U];
+ __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5U];
+ __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __OM union
+ {
+ __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864U];
+ __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15U];
+ __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15U];
+ __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29U];
+ __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6U];
+ __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1U];
+ __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1U];
+ __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55U];
+ __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131U];
+ __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759U];
+ __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1U];
+ __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39U];
+ __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8U];
+ __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register Definitions */
+#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register Definitions */
+#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register Definitions */
+#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 Definitions */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 Definitions */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1U)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/**
+ \brief Set Priority Grouping
+ \details Sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/**
+ \brief Get Priority Grouping
+ \details Reads the priority grouping field from the NVIC Interrupt Controller.
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Active Interrupt
+ \details Reads the active register in NVIC and returns the active bit.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else
+ {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief Encode Priority
+ \details Encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/**
+ \brief Decode Priority
+ \details Decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device.h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+ \brief ITM Send Character
+ \details Transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+ \param [in] ch Character to transmit.
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0U].u32 == 0UL)
+ {
+ __NOP();
+ }
+ ITM->PORT[0U].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/**
+ \brief ITM Receive Character
+ \details Inputs a character via the external variable \ref ITM_RxBuffer.
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+ {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/**
+ \brief ITM Check Character
+ \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+ {
+ return (0); /* no character available */
+ }
+ else
+ {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cm7.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cm7.h
new file mode 100644
index 00000000..3b7530ad
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cm7.h
@@ -0,0 +1,2512 @@
+/**************************************************************************//**
+ * @file core_cm7.h
+ * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM7_H_GENERIC
+#define __CORE_CM7_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex_M7
+ @{
+ */
+
+/* CMSIS CM7 definitions */
+#define __CM7_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM7_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16U) | \
+ __CM7_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x07U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1U
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+#include "core_cmSimd.h" /* Compiler specific SIMD Intrinsics */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM7_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM7_H_DEPENDANT
+#define __CORE_CM7_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM7_REV
+ #define __CM7_REV 0x0000U
+ #warning "__CM7_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0U
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __ICACHE_PRESENT
+ #define __ICACHE_PRESENT 0U
+ #warning "__ICACHE_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __DCACHE_PRESENT
+ #define __DCACHE_PRESENT 0U
+ #warning "__DCACHE_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __DTCM_PRESENT
+ #define __DTCM_PRESENT 0U
+ #warning "__DTCM_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 3U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M7 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27U /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+#define APSR_GE_Pos 16U /*!< APSR: GE Position */
+#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */
+#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */
+#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */
+
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24U];
+ __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24U];
+ __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24U];
+ __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24U];
+ __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56U];
+ __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644U];
+ __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __IM uint32_t ID_MFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[1U];
+ __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */
+ __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */
+ __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */
+ __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */
+ __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+ uint32_t RESERVED3[93U];
+ __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */
+ uint32_t RESERVED4[15U];
+ __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */
+ __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */
+ __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 1 */
+ uint32_t RESERVED5[1U];
+ __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */
+ uint32_t RESERVED6[1U];
+ __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */
+ __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */
+ __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */
+ __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */
+ __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */
+ __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */
+ __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */
+ __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */
+ uint32_t RESERVED7[6U];
+ __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */
+ __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */
+ __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */
+ __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */
+ __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */
+ uint32_t RESERVED8[1U];
+ __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: Branch prediction enable bit Position */
+#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */
+
+#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: Instruction cache enable bit Position */
+#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */
+
+#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: Cache enable bit Position */
+#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */
+
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/* SCB Cache Level ID Register Definitions */
+#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */
+#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */
+
+#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */
+#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */
+
+/* SCB Cache Type Register Definitions */
+#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */
+#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */
+
+#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */
+#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */
+
+#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */
+#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */
+
+#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */
+#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */
+
+#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */
+#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */
+
+/* SCB Cache Size ID Register Definitions */
+#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */
+#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */
+
+#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */
+#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */
+
+#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */
+#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */
+
+#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */
+#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */
+
+#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */
+#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */
+
+#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */
+#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */
+
+#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */
+#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */
+
+/* SCB Cache Size Selection Register Definitions */
+#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */
+#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */
+
+#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */
+#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */
+
+/* SCB Software Triggered Interrupt Register Definitions */
+#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */
+#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */
+
+/* SCB D-Cache Invalidate by Set-way Register Definitions */
+#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */
+#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */
+
+#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */
+#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */
+
+/* SCB D-Cache Clean by Set-way Register Definitions */
+#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */
+#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */
+
+#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */
+#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */
+
+/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */
+#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */
+#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */
+
+#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */
+#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */
+
+/* Instruction Tightly-Coupled Memory Control Register Definitions */
+#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */
+#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */
+
+#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */
+#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */
+
+#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */
+#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */
+
+#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */
+#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */
+
+/* Data Tightly-Coupled Memory Control Register Definitions */
+#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */
+#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */
+
+#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */
+#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */
+
+#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */
+#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */
+
+#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */
+#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */
+
+/* AHBP Control Register Definitions */
+#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */
+#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */
+
+#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */
+#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */
+
+/* L1 Cache Control Register Definitions */
+#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */
+#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */
+
+#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */
+#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */
+
+#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */
+#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */
+
+/* AHBS Control Register Definitions */
+#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */
+#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */
+
+#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */
+#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */
+
+#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/
+#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */
+
+/* Auxiliary Bus Fault Status Register Definitions */
+#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/
+#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */
+
+#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/
+#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */
+
+#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/
+#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */
+
+#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/
+#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */
+
+#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/
+#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */
+
+#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/
+#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */
+#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */
+
+#define SCnSCB_ACTLR_DISRAMODE_Pos 11U /*!< ACTLR: DISRAMODE Position */
+#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */
+
+#define SCnSCB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */
+#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __OM union
+ {
+ __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864U];
+ __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15U];
+ __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15U];
+ __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29U];
+ __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6U];
+ __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1U];
+ __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1U];
+ __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+ uint32_t RESERVED3[981U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55U];
+ __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131U];
+ __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759U];
+ __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1U];
+ __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39U];
+ __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8U];
+ __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+ __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register Definitions */
+#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register Definitions */
+#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register Definitions */
+#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 Definitions */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 Definitions */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */
+
+/* Media and FP Feature Register 2 Definitions */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1U)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/**
+ \brief Set Priority Grouping
+ \details Sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/**
+ \brief Get Priority Grouping
+ \details Reads the priority grouping field from the NVIC Interrupt Controller.
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Active Interrupt
+ \details Reads the active register in NVIC and returns the active bit.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHPR[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else
+ {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return(((uint32_t)SCB->SHPR[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief Encode Priority
+ \details Encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/**
+ \brief Decode Priority
+ \details Decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+/* ########################## FPU functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_FpuFunctions FPU Functions
+ \brief Function that provides FPU type.
+ @{
+ */
+
+/**
+ \brief get FPU type
+ \details returns the FPU type
+ \returns
+ - \b 0: No FPU
+ - \b 1: Single precision FPU
+ - \b 2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+ uint32_t mvfr0;
+
+ mvfr0 = SCB->MVFR0;
+ if ((mvfr0 & 0x00000FF0UL) == 0x220UL)
+ {
+ return 2UL; /* Double + Single precision FPU */
+ }
+ else if ((mvfr0 & 0x00000FF0UL) == 0x020UL)
+ {
+ return 1UL; /* Single precision FPU */
+ }
+ else
+ {
+ return 0UL; /* No FPU */
+ }
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ########################## Cache functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_CacheFunctions Cache Functions
+ \brief Functions that configure Instruction and Data cache.
+ @{
+ */
+
+/* Cache Size ID Register Macros */
+#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos)
+#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos )
+
+
+/**
+ \brief Enable I-Cache
+ \details Turns on I-Cache
+ */
+__STATIC_INLINE void SCB_EnableICache (void)
+{
+ #if (__ICACHE_PRESENT == 1U)
+ __DSB();
+ __ISB();
+ SCB->ICIALLU = 0UL; /* invalidate I-Cache */
+ SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Disable I-Cache
+ \details Turns off I-Cache
+ */
+__STATIC_INLINE void SCB_DisableICache (void)
+{
+ #if (__ICACHE_PRESENT == 1U)
+ __DSB();
+ __ISB();
+ SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */
+ SCB->ICIALLU = 0UL; /* invalidate I-Cache */
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Invalidate I-Cache
+ \details Invalidates I-Cache
+ */
+__STATIC_INLINE void SCB_InvalidateICache (void)
+{
+ #if (__ICACHE_PRESENT == 1U)
+ __DSB();
+ __ISB();
+ SCB->ICIALLU = 0UL;
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Enable D-Cache
+ \details Turns on D-Cache
+ */
+__STATIC_INLINE void SCB_EnableDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ /* invalidate D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) |
+ ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+ __DSB();
+
+ SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Disable D-Cache
+ \details Turns off D-Cache
+ */
+__STATIC_INLINE void SCB_DisableDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */
+
+ /* clean & invalidate D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) |
+ ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Invalidate D-Cache
+ \details Invalidates D-Cache
+ */
+__STATIC_INLINE void SCB_InvalidateDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ /* invalidate D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) |
+ ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Clean D-Cache
+ \details Cleans D-Cache
+ */
+__STATIC_INLINE void SCB_CleanDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ /* clean D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) |
+ ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Clean & Invalidate D-Cache
+ \details Cleans and Invalidates D-Cache
+ */
+__STATIC_INLINE void SCB_CleanInvalidateDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ /* clean & invalidate D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) |
+ ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief D-Cache Invalidate by address
+ \details Invalidates D-Cache for the given address
+ \param[in] addr address (aligned to 32-byte boundary)
+ \param[in] dsize size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_InvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ int32_t op_size = dsize;
+ uint32_t op_addr = (uint32_t)addr;
+ int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */
+
+ __DSB();
+
+ while (op_size > 0) {
+ SCB->DCIMVAC = op_addr;
+ op_addr += linesize;
+ op_size -= linesize;
+ }
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief D-Cache Clean by address
+ \details Cleans D-Cache for the given address
+ \param[in] addr address (aligned to 32-byte boundary)
+ \param[in] dsize size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+ #if (__DCACHE_PRESENT == 1)
+ int32_t op_size = dsize;
+ uint32_t op_addr = (uint32_t) addr;
+ int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */
+
+ __DSB();
+
+ while (op_size > 0) {
+ SCB->DCCMVAC = op_addr;
+ op_addr += linesize;
+ op_size -= linesize;
+ }
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief D-Cache Clean and Invalidate by address
+ \details Cleans and invalidates D_Cache for the given address
+ \param[in] addr address (aligned to 32-byte boundary)
+ \param[in] dsize size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ int32_t op_size = dsize;
+ uint32_t op_addr = (uint32_t) addr;
+ int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */
+
+ __DSB();
+
+ while (op_size > 0) {
+ SCB->DCCIMVAC = op_addr;
+ op_addr += linesize;
+ op_size -= linesize;
+ }
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/*@} end of CMSIS_Core_CacheFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device.h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+ \brief ITM Send Character
+ \details Transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+ \param [in] ch Character to transmit.
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0U].u32 == 0UL)
+ {
+ __NOP();
+ }
+ ITM->PORT[0U].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/**
+ \brief ITM Receive Character
+ \details Inputs a character via the external variable \ref ITM_RxBuffer.
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+ {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/**
+ \brief ITM Check Character
+ \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+ {
+ return (0); /* no character available */
+ }
+ else
+ {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM7_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cmFunc.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cmFunc.h
new file mode 100644
index 00000000..652a48af
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cmFunc.h
@@ -0,0 +1,87 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+*/
+
+/*------------------ RealView Compiler -----------------*/
+#if defined ( __CC_ARM )
+ #include "cmsis_armcc.h"
+
+/*------------------ ARM Compiler V6 -------------------*/
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #include "cmsis_armcc_V6.h"
+
+/*------------------ GNU Compiler ----------------------*/
+#elif defined ( __GNUC__ )
+ #include "cmsis_gcc.h"
+
+/*------------------ ICC Compiler ----------------------*/
+#elif defined ( __ICCARM__ )
+ #include
+
+/*------------------ TI CCS Compiler -------------------*/
+#elif defined ( __TMS470__ )
+ #include
+
+/*------------------ TASKING Compiler ------------------*/
+#elif defined ( __TASKING__ )
+ /*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+/*------------------ COSMIC Compiler -------------------*/
+#elif defined ( __CSMC__ )
+ #include
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+#endif /* __CORE_CMFUNC_H */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cmInstr.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cmInstr.h
new file mode 100644
index 00000000..f474b0e6
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cmInstr.h
@@ -0,0 +1,87 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+/*------------------ RealView Compiler -----------------*/
+#if defined ( __CC_ARM )
+ #include "cmsis_armcc.h"
+
+/*------------------ ARM Compiler V6 -------------------*/
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #include "cmsis_armcc_V6.h"
+
+/*------------------ GNU Compiler ----------------------*/
+#elif defined ( __GNUC__ )
+ #include "cmsis_gcc.h"
+
+/*------------------ ICC Compiler ----------------------*/
+#elif defined ( __ICCARM__ )
+ #include
+
+/*------------------ TI CCS Compiler -------------------*/
+#elif defined ( __TMS470__ )
+ #include
+
+/*------------------ TASKING Compiler ------------------*/
+#elif defined ( __TASKING__ )
+ /*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+/*------------------ COSMIC Compiler -------------------*/
+#elif defined ( __CSMC__ )
+ #include
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cmSimd.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cmSimd.h
new file mode 100644
index 00000000..66bf5c2a
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_cmSimd.h
@@ -0,0 +1,96 @@
+/**************************************************************************//**
+ * @file core_cmSimd.h
+ * @brief CMSIS Cortex-M SIMD Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CMSIMD_H
+#define __CORE_CMSIMD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+/*------------------ RealView Compiler -----------------*/
+#if defined ( __CC_ARM )
+ #include "cmsis_armcc.h"
+
+/*------------------ ARM Compiler V6 -------------------*/
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #include "cmsis_armcc_V6.h"
+
+/*------------------ GNU Compiler ----------------------*/
+#elif defined ( __GNUC__ )
+ #include "cmsis_gcc.h"
+
+/*------------------ ICC Compiler ----------------------*/
+#elif defined ( __ICCARM__ )
+ #include
+
+/*------------------ TI CCS Compiler -------------------*/
+#elif defined ( __TMS470__ )
+ #include
+
+/*------------------ TASKING Compiler ------------------*/
+#elif defined ( __TASKING__ )
+ /*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+/*------------------ COSMIC Compiler -------------------*/
+#elif defined ( __CSMC__ )
+ #include
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CMSIMD_H */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_sc000.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_sc000.h
new file mode 100644
index 00000000..514dbd81
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_sc000.h
@@ -0,0 +1,926 @@
+/**************************************************************************//**
+ * @file core_sc000.h
+ * @brief CMSIS SC000 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_SC000_H_GENERIC
+#define __CORE_SC000_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup SC000
+ @{
+ */
+
+/* CMSIS SC000 definitions */
+#define __SC000_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __SC000_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \
+ __SC000_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_SC (000U) /*!< Cortex secure core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC000_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_SC000_H_DEPENDANT
+#define __CORE_SC000_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __SC000_REV
+ #define __SC000_REV 0x0000U
+ #warning "__SC000_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group SC000 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:1; /*!< bit: 0 Reserved */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31U];
+ __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31U];
+ __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31U];
+ __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31U];
+ uint32_t RESERVED4[64U];
+ __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ uint32_t RESERVED1[154U];
+ __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+ Therefore they are not covered by the SC000 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of SC000 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
+#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
+#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+ else
+ {
+ NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device.h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC000_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_sc300.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_sc300.h
new file mode 100644
index 00000000..8bd18aa3
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/CMSIS/Include/core_sc300.h
@@ -0,0 +1,1745 @@
+/**************************************************************************//**
+ * @file core_sc300.h
+ * @brief CMSIS SC300 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_SC300_H_GENERIC
+#define __CORE_SC300_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup SC3000
+ @{
+ */
+
+/* CMSIS SC300 definitions */
+#define __SC300_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __SC300_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \
+ __SC300_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_SC (300U) /*!< Cortex secure core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC300_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_SC300_H_DEPENDANT
+#define __CORE_SC300_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __SC300_REV
+ #define __SC300_REV 0x0000U
+ #warning "__SC300_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group SC300 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27U /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24U];
+ __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24U];
+ __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24U];
+ __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24U];
+ __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56U];
+ __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644U];
+ __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5U];
+ __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+ uint32_t RESERVED1[129U];
+ __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ uint32_t RESERVED1[1U];
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __OM union
+ {
+ __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864U];
+ __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15U];
+ __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15U];
+ __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29U];
+ __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6U];
+ __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1U];
+ __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1U];
+ __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55U];
+ __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131U];
+ __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759U];
+ __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1U];
+ __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39U];
+ __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8U];
+ __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/**
+ \brief Set Priority Grouping
+ \details Sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/**
+ \brief Get Priority Grouping
+ \details Reads the priority grouping field from the NVIC Interrupt Controller.
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Active Interrupt
+ \details Reads the active register in NVIC and returns the active bit.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else
+ {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief Encode Priority
+ \details Encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/**
+ \brief Decode Priority
+ \details Decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device.h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+ \brief ITM Send Character
+ \details Transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+ \param [in] ch Character to transmit.
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0U].u32 == 0UL)
+ {
+ __NOP();
+ }
+ ITM->PORT[0U].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/**
+ \brief ITM Receive Character
+ \details Inputs a character via the external variable \ref ITM_RxBuffer.
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+ {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/**
+ \brief ITM Check Character
+ \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+ {
+ return (0); /* no character available */
+ }
+ else
+ {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC300_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
new file mode 100644
index 00000000..d42722a2
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
@@ -0,0 +1,3312 @@
+/**
+ ******************************************************************************
+ * @file stm32_hal_legacy.h
+ * @author MCD Application Team
+ * @brief This file contains aliases definition for the STM32Cube HAL constants
+ * macros and functions maintained for legacy purpose.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32_HAL_LEGACY
+#define __STM32_HAL_LEGACY
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define AES_FLAG_RDERR CRYP_FLAG_RDERR
+#define AES_FLAG_WRERR CRYP_FLAG_WRERR
+#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF
+#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR
+#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define ADC_RESOLUTION12b ADC_RESOLUTION_12B
+#define ADC_RESOLUTION10b ADC_RESOLUTION_10B
+#define ADC_RESOLUTION8b ADC_RESOLUTION_8B
+#define ADC_RESOLUTION6b ADC_RESOLUTION_6B
+#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN
+#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED
+#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV
+#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV
+#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV
+#define REGULAR_GROUP ADC_REGULAR_GROUP
+#define INJECTED_GROUP ADC_INJECTED_GROUP
+#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP
+#define AWD_EVENT ADC_AWD_EVENT
+#define AWD1_EVENT ADC_AWD1_EVENT
+#define AWD2_EVENT ADC_AWD2_EVENT
+#define AWD3_EVENT ADC_AWD3_EVENT
+#define OVR_EVENT ADC_OVR_EVENT
+#define JQOVF_EVENT ADC_JQOVF_EVENT
+#define ALL_CHANNELS ADC_ALL_CHANNELS
+#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS
+#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS
+#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR
+#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT
+#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1
+#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2
+#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4
+#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6
+#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8
+#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO
+#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2
+#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO
+#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4
+#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO
+#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11
+#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1
+#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE
+#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING
+#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING
+#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING
+#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5
+
+#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY
+#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY
+#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC
+#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC
+#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL
+#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL
+#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE
+#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE
+#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1
+#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2
+#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3
+#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4
+#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5
+#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6
+#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7
+#if defined(STM32L0)
+#define COMP_LPTIMCONNECTION_ENABLED ((uint32_t)0x00000003U) /*!< COMPX output generic naming: connected to LPTIM input 1 for COMP1, LPTIM input 2 for COMP2 */
+#endif
+#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1
+#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32L0) || defined(STM32L4)
+#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON
+
+#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1
+#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2
+#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3
+#define COMP_NONINVERTINGINPUT_IO4 COMP_INPUT_PLUS_IO4
+#define COMP_NONINVERTINGINPUT_IO5 COMP_INPUT_PLUS_IO5
+#define COMP_NONINVERTINGINPUT_IO6 COMP_INPUT_PLUS_IO6
+
+#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT
+#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT
+#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT
+#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT
+#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1
+#if defined(STM32L0)
+/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2), */
+/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding */
+/* to the second dedicated IO (only for COMP2). */
+#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO2
+#else
+#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2
+#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3
+#endif
+#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4
+#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5
+
+#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW
+#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH
+
+/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */
+/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */
+#if defined(COMP_CSR_LOCK)
+#define COMP_FLAG_LOCK COMP_CSR_LOCK
+#elif defined(COMP_CSR_COMP1LOCK)
+#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK
+#elif defined(COMP_CSR_COMPxLOCK)
+#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK
+#endif
+
+#if defined(STM32L4)
+#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1
+#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1
+#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1
+#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2
+#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2
+#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2
+#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE
+#endif
+
+#if defined(STM32L0)
+#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED
+#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER
+#else
+#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED
+#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED
+#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER
+#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER
+#endif
+
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE
+#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define DAC1_CHANNEL_1 DAC_CHANNEL_1
+#define DAC1_CHANNEL_2 DAC_CHANNEL_2
+#define DAC2_CHANNEL_1 DAC_CHANNEL_1
+#define DAC_WAVE_NONE 0x00000000U
+#define DAC_WAVE_NOISE DAC_CR_WAVE1_0
+#define DAC_WAVE_TRIANGLE DAC_CR_WAVE1_1
+#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE
+#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE
+#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2
+#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4
+#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5
+#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4
+#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2
+#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32
+#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6
+#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7
+#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67
+#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67
+#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76
+#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6
+#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7
+#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6
+
+#define IS_HAL_REMAPDMA IS_DMA_REMAP
+#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE
+#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE
+
+
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD
+#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD
+#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS
+#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES
+#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES
+#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE
+#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE
+#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE
+#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE
+#define OBEX_PCROP OPTIONBYTE_PCROP
+#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG
+#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE
+#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE
+#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE
+#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD
+#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD
+#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE
+#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD
+#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD
+#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE
+#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD
+#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD
+#define PAGESIZE FLASH_PAGE_SIZE
+#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD
+#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1
+#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2
+#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3
+#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4
+#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST
+#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST
+#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA
+#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB
+#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA
+#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB
+#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE
+#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN
+#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE
+#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN
+#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE
+#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD
+#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP
+#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV
+#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR
+#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA
+#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS
+#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST
+#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR
+#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO
+#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS
+#define OB_WDG_SW OB_IWDG_SW
+#define OB_WDG_HW OB_IWDG_HW
+#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET
+#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET
+#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET
+#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET
+#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR
+#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0
+#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1
+#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1
+#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2
+#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3
+/**
+ * @}
+ */
+
+
+/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose
+ * @{
+ */
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) || defined(STM32G4)
+#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE
+#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16
+#else
+#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE
+#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE
+#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8
+#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef
+#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef
+/**
+ * @}
+ */
+
+/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define GET_GPIO_SOURCE GPIO_GET_INDEX
+#define GET_GPIO_INDEX GPIO_GET_INDEX
+
+#if defined(STM32F4)
+#define GPIO_AF12_SDMMC GPIO_AF12_SDIO
+#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO
+#endif
+
+#if defined(STM32F7)
+#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1
+#endif
+
+#if defined(STM32L4)
+#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1
+#endif
+
+#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1
+#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1
+#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1
+
+#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4)
+#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
+#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH
+#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
+#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 */
+
+#if defined(STM32L1)
+ #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW
+ #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM
+ #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH
+ #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
+#endif /* STM32L1 */
+
+#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1)
+ #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
+ #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+ #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH
+#endif /* STM32F0 || STM32F3 || STM32F1 */
+
+#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#if defined(STM32H7)
+ #define __HAL_RCC_JPEG_CLK_ENABLE __HAL_RCC_JPGDECEN_CLK_ENABLE
+ #define __HAL_RCC_JPEG_CLK_DISABLE __HAL_RCC_JPGDECEN_CLK_DISABLE
+ #define __HAL_RCC_JPEG_FORCE_RESET __HAL_RCC_JPGDECRST_FORCE_RESET
+ #define __HAL_RCC_JPEG_RELEASE_RESET __HAL_RCC_JPGDECRST_RELEASE_RESET
+ #define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE
+ #define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE
+
+ #define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1
+ #define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2
+
+ #define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX
+ #define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX
+
+ #define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT
+ #define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT
+ #define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT
+ #define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT
+ #define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT
+ #define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT
+ #define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0
+ #define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO HAL_DMAMUX1_REQ_GEN_TIM12_TRGO
+
+ #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT
+ #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT
+ #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT
+ #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT
+ #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT
+ #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT
+ #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT
+ #define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP
+ #define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP
+ #define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP
+ #define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT
+ #define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP
+ #define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT
+ #define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP
+ #define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP
+ #define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP HAL_DMAMUX2_REQ_GEN_I2C4_WKUP
+ #define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP HAL_DMAMUX2_REQ_GEN_SPI6_WKUP
+ #define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT HAL_DMAMUX2_REQ_GEN_COMP1_OUT
+ #define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT HAL_DMAMUX2_REQ_GEN_COMP2_OUT
+ #define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP HAL_DMAMUX2_REQ_GEN_RTC_WKUP
+ #define HAL_DMAMUX2_REQUEST_GEN_EXTI0 HAL_DMAMUX2_REQ_GEN_EXTI0
+ #define HAL_DMAMUX2_REQUEST_GEN_EXTI2 HAL_DMAMUX2_REQ_GEN_EXTI2
+ #define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT
+ #define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT HAL_DMAMUX2_REQ_GEN_SPI6_IT
+ #define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT
+ #define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT
+ #define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT HAL_DMAMUX2_REQ_GEN_ADC3_IT
+ #define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT
+ #define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT
+ #define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT
+
+ #define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT
+ #define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING
+ #define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING
+ #define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING
+
+
+#endif /* STM32H7 */
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7
+
+#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER
+#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER
+#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD
+#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD
+#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER
+#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER
+#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE
+#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE
+#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE
+#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE
+#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE
+#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE
+#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE
+#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE
+#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE
+#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7)
+#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE
+#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define KR_KEY_RELOAD IWDG_KEY_RELOAD
+#define KR_KEY_ENABLE IWDG_KEY_ENABLE
+#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE
+#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS
+
+#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING
+#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING
+#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING
+
+#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/* The following 3 definition have also been present in a temporary version of lptim.h */
+/* They need to be renamed also to the right name, just in case */
+#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b
+#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b
+#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b
+#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b
+
+#define NAND_AddressTypedef NAND_AddressTypeDef
+
+#define __ARRAY_ADDRESS ARRAY_ADDRESS
+#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE
+#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE
+#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE
+#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define NOR_StatusTypedef HAL_NOR_StatusTypeDef
+#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS
+#define NOR_ONGOING HAL_NOR_STATUS_ONGOING
+#define NOR_ERROR HAL_NOR_STATUS_ERROR
+#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT
+
+#define __NOR_WRITE NOR_WRITE
+#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT
+/**
+ * @}
+ */
+
+/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0
+#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1
+#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2
+#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3
+
+#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0
+#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1
+#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2
+#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3
+
+#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
+#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
+
+#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
+#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
+
+#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0
+#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO
+#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0
+#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS
+#if defined(STM32F7)
+ #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+/* Compact Flash-ATA registers description */
+#define CF_DATA ATA_DATA
+#define CF_SECTOR_COUNT ATA_SECTOR_COUNT
+#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER
+#define CF_CYLINDER_LOW ATA_CYLINDER_LOW
+#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH
+#define CF_CARD_HEAD ATA_CARD_HEAD
+#define CF_STATUS_CMD ATA_STATUS_CMD
+#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE
+#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA
+
+/* Compact Flash-ATA commands */
+#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD
+#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD
+#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD
+#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD
+
+#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef
+#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS
+#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING
+#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR
+#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define FORMAT_BIN RTC_FORMAT_BIN
+#define FORMAT_BCD RTC_FORMAT_BCD
+
+#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE
+#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE
+#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+
+#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE
+#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
+#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
+
+#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT
+#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2
+
+#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE
+#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1
+#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1
+
+#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT
+#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1
+#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE
+#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE
+
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+
+#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE
+#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE
+
+#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE
+#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE
+#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE
+#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE
+#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE
+#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE
+#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE
+#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE
+#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE
+#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE
+#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE
+#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE
+#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE
+
+#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE
+#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE
+
+#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE
+#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK
+#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK
+
+#define TIM_DMABase_CR1 TIM_DMABASE_CR1
+#define TIM_DMABase_CR2 TIM_DMABASE_CR2
+#define TIM_DMABase_SMCR TIM_DMABASE_SMCR
+#define TIM_DMABase_DIER TIM_DMABASE_DIER
+#define TIM_DMABase_SR TIM_DMABASE_SR
+#define TIM_DMABase_EGR TIM_DMABASE_EGR
+#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1
+#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2
+#define TIM_DMABase_CCER TIM_DMABASE_CCER
+#define TIM_DMABase_CNT TIM_DMABASE_CNT
+#define TIM_DMABase_PSC TIM_DMABASE_PSC
+#define TIM_DMABase_ARR TIM_DMABASE_ARR
+#define TIM_DMABase_RCR TIM_DMABASE_RCR
+#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1
+#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2
+#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3
+#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4
+#define TIM_DMABase_BDTR TIM_DMABASE_BDTR
+#define TIM_DMABase_DCR TIM_DMABASE_DCR
+#define TIM_DMABase_DMAR TIM_DMABASE_DMAR
+#define TIM_DMABase_OR1 TIM_DMABASE_OR1
+#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3
+#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5
+#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6
+#define TIM_DMABase_OR2 TIM_DMABASE_OR2
+#define TIM_DMABase_OR3 TIM_DMABASE_OR3
+#define TIM_DMABase_OR TIM_DMABASE_OR
+
+#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE
+#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1
+#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2
+#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3
+#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4
+#define TIM_EventSource_COM TIM_EVENTSOURCE_COM
+#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER
+#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK
+#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2
+
+#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER
+#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS
+#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS
+#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS
+#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS
+#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS
+#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS
+#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS
+#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS
+#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS
+#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS
+#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS
+#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS
+#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS
+#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS
+#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS
+#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS
+#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING
+#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
+#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
+
+#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE
+#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE
+
+#define __DIV_SAMPLING16 UART_DIV_SAMPLING16
+#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16
+#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16
+#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16
+
+#define __DIV_SAMPLING8 UART_DIV_SAMPLING8
+#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8
+#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8
+#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8
+
+#define __DIV_LPUART UART_DIV_LPUART
+
+#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE
+#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE
+#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE
+
+#define USARTNACK_ENABLED USART_NACK_ENABLE
+#define USARTNACK_DISABLED USART_NACK_DISABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CFR_BASE WWDG_CFR_BASE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CAN_FilterFIFO0 CAN_FILTER_FIFO0
+#define CAN_FilterFIFO1 CAN_FILTER_FIFO1
+#define CAN_IT_RQCP0 CAN_IT_TME
+#define CAN_IT_RQCP1 CAN_IT_TME
+#define CAN_IT_RQCP2 CAN_IT_TME
+#define INAK_TIMEOUT CAN_TIMEOUT_VALUE
+#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE
+#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U)
+#define CAN_TXSTATUS_OK ((uint8_t)0x01U)
+#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U)
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define VLAN_TAG ETH_VLAN_TAG
+#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD
+#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD
+#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD
+#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK
+#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK
+#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK
+#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK
+
+#define ETH_MMCCR 0x00000100U
+#define ETH_MMCRIR 0x00000104U
+#define ETH_MMCTIR 0x00000108U
+#define ETH_MMCRIMR 0x0000010CU
+#define ETH_MMCTIMR 0x00000110U
+#define ETH_MMCTGFSCCR 0x0000014CU
+#define ETH_MMCTGFMSCCR 0x00000150U
+#define ETH_MMCTGFCR 0x00000168U
+#define ETH_MMCRFCECR 0x00000194U
+#define ETH_MMCRFAECR 0x00000198U
+#define ETH_MMCRGUFCR 0x000001C4U
+
+#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */
+#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */
+#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */
+#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */
+#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */
+#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */
+#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */
+#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input frame for transmission */
+#define ETH_MAC_MII_TRANSMIT_ACTIVE 0x00010000U /* MAC MII transmit engine active */
+#define ETH_MAC_RXFIFO_EMPTY 0x00000000U /* Rx FIFO fill level: empty */
+#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */
+#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control activate threshold */
+#define ETH_MAC_RXFIFO_FULL 0x00000300U /* Rx FIFO fill level: full */
+#if defined(STM32F1)
+#else
+#define ETH_MAC_READCONTROLLER_IDLE 0x00000000U /* Rx FIFO read controller IDLE state */
+#define ETH_MAC_READCONTROLLER_READING_DATA 0x00000020U /* Rx FIFO read controller Reading frame data */
+#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status (or time-stamp) */
+#endif
+#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and status */
+#define ETH_MAC_RXFIFO_WRITE_ACTIVE 0x00000010U /* Rx FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_NOTACTIVE 0x00000000U /* MAC small FIFO read / write controllers not active */
+#define ETH_MAC_SMALL_FIFO_READ_ACTIVE 0x00000002U /* MAC small FIFO read controller active */
+#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE 0x00000004U /* MAC small FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_RW_ACTIVE 0x00000006U /* MAC small FIFO read / write controllers active */
+#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE 0x00000001U /* MAC MII receive protocol engine active */
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR
+#define DCMI_IT_OVF DCMI_IT_OVR
+#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI
+#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI
+
+#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop
+#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop
+#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop
+
+/**
+ * @}
+ */
+
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+ defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888
+#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888
+#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565
+#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555
+#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444
+
+#define CM_ARGB8888 DMA2D_INPUT_ARGB8888
+#define CM_RGB888 DMA2D_INPUT_RGB888
+#define CM_RGB565 DMA2D_INPUT_RGB565
+#define CM_ARGB1555 DMA2D_INPUT_ARGB1555
+#define CM_ARGB4444 DMA2D_INPUT_ARGB4444
+#define CM_L8 DMA2D_INPUT_L8
+#define CM_AL44 DMA2D_INPUT_AL44
+#define CM_AL88 DMA2D_INPUT_AL88
+#define CM_L4 DMA2D_INPUT_L4
+#define CM_A8 DMA2D_INPUT_A8
+#define CM_A4 DMA2D_INPUT_A4
+/**
+ * @}
+ */
+#endif /* STM32L4 || STM32F7*/
+
+/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef
+#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef
+#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish
+#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish
+#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish
+#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish
+
+/*HASH Algorithm Selection*/
+
+#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1
+#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224
+#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256
+#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5
+
+#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH
+#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC
+
+#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY
+#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode
+#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode
+#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode
+#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode
+#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode
+#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode
+#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
+#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect
+#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT())
+#if defined(STM32L0)
+#else
+#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT())
+#endif
+#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
+#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram
+#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown
+#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown
+#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock
+#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock
+#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase
+#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program
+
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter
+#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter
+#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter
+#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter
+
+#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose
+ * @{
+ */
+#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD
+#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg
+#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown
+#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor
+#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg
+#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown
+#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor
+#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler
+#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD
+#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler
+#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback
+#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive
+#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive
+#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC
+#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC
+#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM
+
+#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL
+#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING
+#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING
+#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING
+#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING
+#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING
+#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING
+
+#define CR_OFFSET_BB PWR_CR_OFFSET_BB
+#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB
+#define PMODE_BIT_NUMBER VOS_BIT_NUMBER
+#define CR_PMODE_BB CR_VOS_BB
+
+#define DBP_BitNumber DBP_BIT_NUMBER
+#define PVDE_BitNumber PVDE_BIT_NUMBER
+#define PMODE_BitNumber PMODE_BIT_NUMBER
+#define EWUP_BitNumber EWUP_BIT_NUMBER
+#define FPDS_BitNumber FPDS_BIT_NUMBER
+#define ODEN_BitNumber ODEN_BIT_NUMBER
+#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER
+#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER
+#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER
+#define BRE_BitNumber BRE_BIT_NUMBER
+
+#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL
+
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT
+#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback
+#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt
+#define HAL_TIM_DMAError TIM_DMAError
+#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt
+#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback
+#define HAL_LTDC_Relaod HAL_LTDC_Reload
+#define HAL_LTDC_StructInitFromVideoConfig HAL_LTDCEx_StructInitFromVideoConfig
+#define HAL_LTDC_StructInitFromAdaptedCommandConfig HAL_LTDCEx_StructInitFromAdaptedCommandConfig
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros ------------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define AES_IT_CC CRYP_IT_CC
+#define AES_IT_ERR CRYP_IT_ERR
+#define AES_FLAG_CCF CRYP_FLAG_CCF
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE
+#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH
+#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH
+#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM
+#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC
+#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM
+#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC
+#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI
+#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK
+#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG
+#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG
+#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE
+#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE
+#define __HAL_SYSCFG_SRAM2_WRP_ENABLE __HAL_SYSCFG_SRAM2_WRP_0_31_ENABLE
+
+#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY
+#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48
+#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS
+#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER
+#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __ADC_ENABLE __HAL_ADC_ENABLE
+#define __ADC_DISABLE __HAL_ADC_DISABLE
+#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS
+#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS
+#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE
+#define __ADC_IS_ENABLED ADC_IS_ENABLE
+#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR
+#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR
+#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING
+#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE
+
+#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION
+#define __HAL_ADC_JSQR_RK ADC_JSQR_RK
+#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT
+#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR
+#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION
+#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE
+#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM
+#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT
+#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS
+#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN
+#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ
+#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET
+#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET
+#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL
+#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL
+#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET
+#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET
+#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD
+
+#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER
+#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI
+#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
+#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
+#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER
+#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER
+#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE
+
+#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT
+#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT
+#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL
+#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM
+#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET
+#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE
+#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE
+#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER
+
+#define __HAL_ADC_SQR1 ADC_SQR1
+#define __HAL_ADC_SMPR1 ADC_SMPR1
+#define __HAL_ADC_SMPR2 ADC_SMPR2
+#define __HAL_ADC_SQR3_RK ADC_SQR3_RK
+#define __HAL_ADC_SQR2_RK ADC_SQR2_RK
+#define __HAL_ADC_SQR1_RK ADC_SQR1_RK
+#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS
+#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS
+#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV
+#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection
+#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq
+#define __HAL_ADC_JSQR ADC_JSQR
+
+#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL
+#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF
+#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT
+#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS
+#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN
+#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR
+#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT
+#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT
+#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT
+#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1
+#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1
+#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2
+#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2
+#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3
+#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3
+#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4
+#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4
+#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5
+#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5
+#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6
+#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6
+#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7
+#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7
+#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8
+#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8
+
+#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9
+#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9
+#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10
+#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10
+#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11
+#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11
+#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12
+#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12
+#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13
+#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13
+#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14
+#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14
+#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2
+#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2
+
+
+#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15
+#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15
+#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16
+#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16
+#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17
+#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17
+#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC
+#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC
+#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
+#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
+#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
+#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
+#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT
+#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT
+#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT
+#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT
+#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT
+#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT
+#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1
+#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1
+#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1
+#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1
+#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2
+#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#if defined(STM32F3)
+#define COMP_START __HAL_COMP_ENABLE
+#define COMP_STOP __HAL_COMP_DISABLE
+#define COMP_LOCK __HAL_COMP_LOCK
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F302xE) || defined(STM32F302xC)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP7_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP7_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F373xC) ||defined(STM32F378xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+# endif
+#else
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+#endif
+
+#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE
+
+#if defined(STM32L0) || defined(STM32L4)
+/* Note: On these STM32 families, the only argument of this macro */
+/* is COMP_FLAG_LOCK. */
+/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */
+/* argument. */
+#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__))
+#endif
+/**
+ * @}
+ */
+
+#if defined(STM32L0) || defined(STM32L4)
+/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
+#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
+/**
+ * @}
+ */
+#endif
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \
+ ((WAVE) == DAC_WAVE_NOISE)|| \
+ ((WAVE) == DAC_WAVE_TRIANGLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_WRPAREA IS_OB_WRPAREA
+#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM
+#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM
+#define IS_TYPEERASE IS_FLASH_TYPEERASE
+#define IS_NBSECTORS IS_FLASH_NBSECTORS
+#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2
+#define __HAL_I2C_GENERATE_START I2C_GENERATE_START
+#if defined(STM32F1)
+#define __HAL_I2C_FREQ_RANGE I2C_FREQRANGE
+#else
+#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE
+#endif /* STM32F1 */
+#define __HAL_I2C_RISE_TIME I2C_RISE_TIME
+#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD
+#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST
+#define __HAL_I2C_SPEED I2C_SPEED
+#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE
+#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ
+#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS
+#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE
+#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ
+#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB
+#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB
+#define __HAL_I2C_FREQRANGE I2C_FREQRANGE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE
+#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __IRDA_DISABLE __HAL_IRDA_DISABLE
+#define __IRDA_ENABLE __HAL_IRDA_ENABLE
+
+#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
+#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
+#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
+#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
+
+#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS
+#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT
+#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT
+#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD
+#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX
+#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX
+#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX
+#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX
+#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L
+#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H
+#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM
+#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES
+#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX
+#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT
+#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION
+#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE
+#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE
+#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine
+#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig
+#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0)
+#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0)
+#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0)
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention
+#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2
+#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2
+#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB
+#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB
+
+#if defined (STM32F4)
+#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT()
+#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT()
+#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG()
+#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG()
+#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG
+#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT
+#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT
+#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT
+#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG
+#endif /* STM32F4 */
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose
+ * @{
+ */
+
+#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI
+#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI
+
+#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback
+#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
+
+#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE
+#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE
+#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE
+#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE
+#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET
+#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET
+#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE
+#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE
+#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET
+#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET
+#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE
+#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE
+#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE
+#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET
+#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET
+#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE
+#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE
+#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET
+#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET
+#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE
+#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE
+#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE
+#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE
+#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET
+#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET
+#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE
+#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE
+#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE
+#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE
+#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET
+#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET
+#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE
+#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE
+#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET
+#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET
+#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET
+#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET
+#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET
+#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET
+#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET
+#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET
+#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET
+#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET
+#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET
+#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET
+#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET
+#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET
+#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE
+#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE
+#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET
+#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET
+#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE
+#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE
+#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE
+#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE
+#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET
+#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET
+#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE
+#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE
+#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE
+#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE
+#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET
+#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET
+#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE
+#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE
+#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET
+#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET
+#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE
+#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE
+#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE
+#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE
+#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET
+#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET
+#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE
+#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE
+#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET
+#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET
+#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE
+#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE
+#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE
+#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE
+#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET
+#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET
+#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE
+#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE
+#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET
+#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET
+#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE
+#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE
+#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE
+#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE
+#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET
+#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET
+#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE
+#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE
+#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE
+#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE
+#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET
+#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET
+#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE
+#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE
+#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE
+#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE
+#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET
+#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET
+#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE
+#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE
+#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET
+#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET
+#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE
+#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE
+#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE
+#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE
+#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE
+#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE
+#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE
+#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE
+#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE
+#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE
+#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET
+#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET
+#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE
+#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE
+#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET
+#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET
+#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE
+#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE
+#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE
+#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE
+#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE
+#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE
+#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET
+#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET
+#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE
+#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE
+#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE
+#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE
+#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE
+#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE
+#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET
+#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET
+#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE
+#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE
+#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE
+#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE
+#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET
+#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET
+#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE
+#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE
+#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE
+#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE
+#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET
+#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET
+#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE
+#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE
+#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE
+#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE
+#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET
+#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET
+#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE
+#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE
+#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE
+#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE
+#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET
+#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET
+#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE
+#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE
+#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE
+#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE
+#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET
+#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET
+#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE
+#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE
+#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE
+#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE
+#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET
+#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET
+#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE
+#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE
+#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE
+#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE
+#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET
+#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET
+#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE
+#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE
+#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE
+#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE
+#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET
+#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET
+#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE
+#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE
+#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE
+#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE
+#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET
+#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET
+#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE
+#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE
+#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE
+#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE
+#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET
+#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET
+#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE
+#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE
+#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE
+#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE
+#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET
+#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET
+#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE
+#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE
+#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE
+#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE
+#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET
+#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET
+#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE
+#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE
+#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE
+#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE
+#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET
+#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET
+#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE
+#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE
+#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE
+#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE
+#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET
+#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET
+#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE
+#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE
+#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE
+#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE
+#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET
+#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET
+#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE
+#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE
+#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE
+#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE
+#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET
+#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET
+#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE
+#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE
+#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE
+#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE
+#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET
+#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET
+#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE
+#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE
+#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE
+#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE
+#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET
+#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET
+
+#if defined(STM32WB)
+#define __HAL_RCC_QSPI_CLK_DISABLE __HAL_RCC_QUADSPI_CLK_DISABLE
+#define __HAL_RCC_QSPI_CLK_ENABLE __HAL_RCC_QUADSPI_CLK_ENABLE
+#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE
+#define __HAL_RCC_QSPI_FORCE_RESET __HAL_RCC_QUADSPI_FORCE_RESET
+#define __HAL_RCC_QSPI_RELEASE_RESET __HAL_RCC_QUADSPI_RELEASE_RESET
+#define __HAL_RCC_QSPI_IS_CLK_ENABLED __HAL_RCC_QUADSPI_IS_CLK_ENABLED
+#define __HAL_RCC_QSPI_IS_CLK_DISABLED __HAL_RCC_QUADSPI_IS_CLK_DISABLED
+#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED
+#define QSPI_IRQHandler QUADSPI_IRQHandler
+#endif /* __HAL_RCC_QUADSPI_CLK_ENABLE */
+
+#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE
+#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE
+#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE
+#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE
+#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET
+#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET
+#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE
+#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE
+#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE
+#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE
+#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET
+#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET
+#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE
+#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE
+#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE
+#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE
+#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET
+#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET
+#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
+#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
+#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE
+#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE
+#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE
+#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE
+#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET
+#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET
+#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE
+#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE
+#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE
+#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE
+#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET
+#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET
+#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE
+#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE
+#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE
+#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE
+#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET
+#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET
+#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE
+#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE
+#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE
+#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE
+#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET
+#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET
+#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE
+#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE
+#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE
+#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE
+#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE
+#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE
+#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE
+#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE
+#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE
+#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE
+#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET
+#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET
+#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE
+#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE
+#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE
+#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE
+#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET
+#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET
+#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE
+#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE
+#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE
+#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE
+#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET
+#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET
+#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE
+#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE
+#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET
+#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET
+#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE
+#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE
+#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET
+#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET
+#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE
+#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE
+#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET
+#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET
+#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE
+#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE
+#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET
+#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET
+#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE
+#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE
+#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET
+#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET
+#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE
+#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE
+#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE
+#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE
+#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET
+#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET
+#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE
+#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE
+#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE
+#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE
+#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET
+#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET
+#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE
+#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE
+#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE
+#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE
+#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET
+#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET
+#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE
+#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE
+#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE
+#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE
+#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET
+#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET
+#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE
+#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE
+#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE
+#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE
+#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET
+#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET
+#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE
+#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE
+#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE
+#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE
+#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET
+#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET
+#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE
+#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE
+#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE
+#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE
+#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET
+#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET
+#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE
+#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE
+#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE
+#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE
+#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET
+#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET
+#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE
+#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE
+#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE
+#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE
+#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET
+#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET
+#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE
+#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE
+#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE
+#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE
+#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET
+#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET
+#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE
+#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE
+#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET
+#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET
+#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE
+#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE
+#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE
+#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE
+#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET
+#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET
+#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE
+#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE
+#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE
+#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE
+#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET
+#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET
+#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE
+#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE
+#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE
+#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE
+#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET
+#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET
+#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE
+#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE
+#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE
+#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE
+#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET
+#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET
+#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE
+#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE
+#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE
+#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE
+#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET
+#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET
+#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE
+#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE
+#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE
+#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE
+#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET
+#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET
+#define __USART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE
+#define __USART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE
+#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE
+#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE
+#define __USART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET
+#define __USART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET
+#define __USART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE
+#define __USART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE
+#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE
+#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE
+#define __USART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET
+#define __USART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET
+#define __USART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE
+#define __USART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE
+#define __USART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET
+#define __USART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET
+#define __USART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE
+#define __USART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE
+#define __USART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET
+#define __USART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET
+#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE
+#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE
+#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET
+#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE
+#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE
+#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE
+#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE
+#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET
+#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE
+#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE
+#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE
+#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE
+#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET
+#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET
+#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE
+#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE
+#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET
+#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET
+#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE
+#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE
+#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE
+#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE
+#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET
+#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET
+#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE
+#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE
+#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE
+#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE
+#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE
+#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE
+#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET
+#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET
+#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE
+#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE
+
+#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE
+#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE
+#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE
+#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE
+#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE
+#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE
+#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE
+#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE
+#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE
+#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE
+#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE
+#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE
+#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE
+#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET
+#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET
+#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE
+#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE
+#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE
+#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE
+#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE
+#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET
+#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET
+#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE
+#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE
+#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE
+#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE
+#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET
+#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET
+#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE
+#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE
+#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE
+#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE
+#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET
+#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET
+#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE
+#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE
+#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE
+#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE
+#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE
+#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE
+#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE
+#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE
+#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE
+#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE
+#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE
+#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE
+#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE
+#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE
+#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE
+#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE
+#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE
+#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE
+#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE
+#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET
+#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET
+#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE
+#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE
+#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE
+#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE
+#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET
+#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET
+#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE
+#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE
+#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE
+#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE
+#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET
+#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET
+#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE
+#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE
+#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE
+#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE
+#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET
+#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET
+#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE
+#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE
+#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE
+#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE
+#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET
+#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE
+#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE
+#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE
+#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE
+#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE
+#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE
+#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET
+#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET
+#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE
+#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE
+#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE
+#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE
+#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET
+#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET
+#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE
+#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE
+#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE
+#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE
+#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET
+#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET
+#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE
+#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE
+#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED
+#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED
+#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE
+#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE
+#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE
+#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE
+#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE
+#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE
+#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET
+#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET
+#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE
+#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE
+#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
+#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
+#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE
+#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE
+#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET
+#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET
+#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE
+
+/* alias define maintained for legacy */
+#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+
+#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE
+#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE
+#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE
+#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE
+#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE
+#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE
+#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE
+#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE
+#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE
+#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE
+#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE
+#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE
+#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE
+#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE
+#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE
+#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE
+#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE
+#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE
+#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE
+#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE
+
+#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET
+#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET
+#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET
+#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET
+#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET
+#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET
+#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET
+#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET
+#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET
+#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET
+#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET
+#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET
+#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET
+#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET
+#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET
+#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET
+#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET
+#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET
+#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET
+#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET
+
+#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED
+#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED
+#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED
+#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED
+#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED
+#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED
+#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED
+#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED
+#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED
+#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED
+#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED
+#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED
+#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED
+#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED
+#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED
+#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED
+#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED
+#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED
+#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED
+#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED
+#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED
+#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED
+#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED
+#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED
+#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED
+#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED
+#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED
+#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED
+#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED
+#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED
+#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED
+#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED
+#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED
+#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED
+#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED
+#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED
+#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED
+#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED
+#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED
+#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED
+#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED
+#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED
+#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED
+#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED
+#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED
+#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED
+#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED
+#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED
+#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED
+#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED
+#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED
+#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED
+#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED
+#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED
+#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED
+#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED
+#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED
+#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED
+#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED
+#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED
+#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED
+#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED
+#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED
+#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED
+#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED
+#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED
+#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED
+#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED
+#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED
+#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED
+#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED
+#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED
+#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED
+#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED
+#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED
+#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED
+#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED
+#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED
+#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED
+#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED
+#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED
+#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED
+#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED
+#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED
+#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED
+#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED
+#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED
+#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED
+#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED
+#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED
+#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED
+#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED
+#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED
+#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED
+#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED
+#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED
+#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED
+#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED
+#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED
+#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED
+#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED
+#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED
+#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED
+#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED
+#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED
+#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED
+#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED
+#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED
+#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED
+#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED
+#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED
+#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED
+#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED
+#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED
+#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED
+#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED
+
+#if defined(STM32F4)
+#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
+#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
+#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED
+#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED
+#define Sdmmc1ClockSelection SdioClockSelection
+#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO
+#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48
+#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK
+#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG
+#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET
+#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE
+#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED
+#define SdioClockSelection Sdmmc1ClockSelection
+#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1
+#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG
+#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE
+#endif
+
+#if defined(STM32F7)
+#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48
+#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK
+#endif
+
+#if defined(STM32H7)
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() __HAL_RCC_USB1_OTG_HS_FORCE_RESET()
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() __HAL_RCC_USB1_OTG_HS_RELEASE_RESET()
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE()
+
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() __HAL_RCC_USB2_OTG_FS_FORCE_RESET()
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() __HAL_RCC_USB2_OTG_FS_RELEASE_RESET()
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE()
+#endif
+
+#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG
+#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG
+
+#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE
+
+#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE
+#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE
+#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK
+#define IS_RCC_HCLK_DIV IS_RCC_PCLK
+#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK
+
+#define RCC_IT_HSI14 RCC_IT_HSI14RDY
+
+#define RCC_IT_CSSLSE RCC_IT_LSECSS
+#define RCC_IT_CSSHSE RCC_IT_CSS
+
+#define RCC_PLLMUL_3 RCC_PLL_MUL3
+#define RCC_PLLMUL_4 RCC_PLL_MUL4
+#define RCC_PLLMUL_6 RCC_PLL_MUL6
+#define RCC_PLLMUL_8 RCC_PLL_MUL8
+#define RCC_PLLMUL_12 RCC_PLL_MUL12
+#define RCC_PLLMUL_16 RCC_PLL_MUL16
+#define RCC_PLLMUL_24 RCC_PLL_MUL24
+#define RCC_PLLMUL_32 RCC_PLL_MUL32
+#define RCC_PLLMUL_48 RCC_PLL_MUL48
+
+#define RCC_PLLDIV_2 RCC_PLL_DIV2
+#define RCC_PLLDIV_3 RCC_PLL_DIV3
+#define RCC_PLLDIV_4 RCC_PLL_DIV4
+
+#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE
+#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG
+#define RCC_MCO_NODIV RCC_MCODIV_1
+#define RCC_MCO_DIV1 RCC_MCODIV_1
+#define RCC_MCO_DIV2 RCC_MCODIV_2
+#define RCC_MCO_DIV4 RCC_MCODIV_4
+#define RCC_MCO_DIV8 RCC_MCODIV_8
+#define RCC_MCO_DIV16 RCC_MCODIV_16
+#define RCC_MCO_DIV32 RCC_MCODIV_32
+#define RCC_MCO_DIV64 RCC_MCODIV_64
+#define RCC_MCO_DIV128 RCC_MCODIV_128
+#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK
+#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI
+#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE
+#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK
+#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI
+#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14
+#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48
+#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE
+#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2
+
+#if defined(STM32L4)
+#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE
+#elif defined(STM32WB) || defined(STM32G0)
+#else
+#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK
+#endif
+
+#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1
+#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL
+#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI
+#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5
+#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2
+#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3
+
+#define HSION_BitNumber RCC_HSION_BIT_NUMBER
+#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER
+#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER
+#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER
+#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER
+#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER
+#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER
+#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER
+#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER
+#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER
+#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER
+#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER
+#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER
+#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER
+#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER
+#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER
+#define LSION_BitNumber RCC_LSION_BIT_NUMBER
+#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER
+#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER
+#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER
+#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER
+#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER
+#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER
+#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER
+#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER
+#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER
+#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS
+#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS
+#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS
+#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS
+#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE
+#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE
+
+#define CR_HSION_BB RCC_CR_HSION_BB
+#define CR_CSSON_BB RCC_CR_CSSON_BB
+#define CR_PLLON_BB RCC_CR_PLLON_BB
+#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB
+#define CR_MSION_BB RCC_CR_MSION_BB
+#define CSR_LSION_BB RCC_CSR_LSION_BB
+#define CSR_LSEON_BB RCC_CSR_LSEON_BB
+#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB
+#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB
+#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB
+#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB
+#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB
+#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB
+#define CR_HSEON_BB RCC_CR_HSEON_BB
+#define CSR_RMVF_BB RCC_CSR_RMVF_BB
+#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB
+#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB
+
+#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE
+#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE
+#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE
+#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE
+#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE
+
+#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT
+
+#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN
+#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF
+
+#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48
+#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ
+#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP
+#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ
+#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE
+#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48
+
+#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE
+#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE
+#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED
+#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED
+#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET
+#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET
+#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED
+#define DfsdmClockSelection Dfsdm1ClockSelection
+#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1
+#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK
+#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG
+#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE
+#define RCC_DFSDM1CLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_SWPMI1CLKSOURCE_PCLK RCC_SWPMI1CLKSOURCE_PCLK1
+#define RCC_LPTIM1CLKSOURCE_PCLK RCC_LPTIM1CLKSOURCE_PCLK1
+#define RCC_LPTIM2CLKSOURCE_PCLK RCC_LPTIM2CLKSOURCE_PCLK1
+
+#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM1AUDIOCLKSOURCE_I2S1
+#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM1AUDIOCLKSOURCE_I2S2
+#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM2AUDIOCLKSOURCE_I2S1
+#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM2AUDIOCLKSOURCE_I2S2
+#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2
+#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit)
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#if defined (STM32G0)
+#else
+#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
+#endif
+#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT
+#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT
+
+#if defined (STM32F1)
+#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG()
+
+#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT()
+
+#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT()
+
+#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG()
+
+#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
+#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
+#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
+#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
+#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
+#endif /* STM32F1 */
+
+#define IS_ALARM IS_RTC_ALARM
+#define IS_ALARM_MASK IS_RTC_ALARM_MASK
+#define IS_TAMPER IS_RTC_TAMPER
+#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE
+#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER
+#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT
+#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE
+#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION
+#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE
+#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ
+#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION
+#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER
+#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK
+#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER
+
+#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE
+#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE
+#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS
+
+#if defined(STM32F4) || defined(STM32F2)
+#define SD_SDMMC_DISABLED SD_SDIO_DISABLED
+#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY
+#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED
+#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION
+#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND
+#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT
+#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED
+#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE
+#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE
+#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE
+#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL
+#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT
+#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT
+#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG
+#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG
+#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT
+#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT
+#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS
+#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT
+#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND
+/* alias CMSIS */
+#define SDMMC1_IRQn SDIO_IRQn
+#define SDMMC1_IRQHandler SDIO_IRQHandler
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define SD_SDIO_DISABLED SD_SDMMC_DISABLED
+#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY
+#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED
+#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION
+#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND
+#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT
+#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED
+#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE
+#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE
+#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE
+#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE
+#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT
+#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT
+#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG
+#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG
+#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT
+#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT
+#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS
+#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT
+#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND
+/* alias CMSIS for compatibilities */
+#define SDIO_IRQn SDMMC1_IRQn
+#define SDIO_IRQHandler SDMMC1_IRQHandler
+#endif
+
+#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2)
+#define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef
+#define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef
+#define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef
+#define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef
+#endif
+
+#if defined(STM32H7)
+#define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback HAL_MMCEx_Read_DMADoubleBuf0CpltCallback
+#define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback HAL_MMCEx_Read_DMADoubleBuf1CpltCallback
+#define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback HAL_MMCEx_Write_DMADoubleBuf0CpltCallback
+#define HAL_MMCEx_Write_DMADoubleBuffer1CpltCallback HAL_MMCEx_Write_DMADoubleBuf1CpltCallback
+#define HAL_SDEx_Read_DMADoubleBuffer0CpltCallback HAL_SDEx_Read_DMADoubleBuf0CpltCallback
+#define HAL_SDEx_Read_DMADoubleBuffer1CpltCallback HAL_SDEx_Read_DMADoubleBuf1CpltCallback
+#define HAL_SDEx_Write_DMADoubleBuffer0CpltCallback HAL_SDEx_Write_DMADoubleBuf0CpltCallback
+#define HAL_SDEx_Write_DMADoubleBuffer1CpltCallback HAL_SDEx_Write_DMADoubleBuf1CpltCallback
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT
+#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT
+#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE
+#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE
+#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE
+#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE
+
+#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
+#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
+
+#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1
+#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2
+#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START
+#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH
+#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR
+#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE
+#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE
+#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_SPI_1LINE_TX SPI_1LINE_TX
+#define __HAL_SPI_1LINE_RX SPI_1LINE_RX
+#define __HAL_SPI_RESET_CRC SPI_RESET_CRC
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
+#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION
+#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
+#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION
+
+#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD
+
+#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE
+#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT
+#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT
+#define __USART_ENABLE __HAL_USART_ENABLE
+#define __USART_DISABLE __HAL_USART_DISABLE
+
+#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
+#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE
+
+#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE
+#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE
+#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+
+#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup
+#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup
+
+#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo
+#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE
+#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE
+
+#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
+#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT
+
+#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
+
+#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN
+#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER
+#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER
+#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER
+#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD
+#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD
+#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION
+#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION
+#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER
+#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER
+#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE
+#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE
+
+#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG
+#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER
+
+#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE
+#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE
+#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_LTDC_LAYER LTDC_LAYER
+#if defined(STM32F7)
+#else
+#define __HAL_LTDC_RELOAD_CONFIG __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE
+#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE
+#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE
+#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE
+#define SAI_STREOMODE SAI_STEREOMODE
+#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY
+#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL
+#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL
+#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL
+#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL
+#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL
+#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE
+#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1
+#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPDIFRX_Aliased_Macros HAL SPDIFRX Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#if defined(STM32H7)
+#define HAL_SPDIFRX_ReceiveControlFlow HAL_SPDIFRX_ReceiveCtrlFlow
+#define HAL_SPDIFRX_ReceiveControlFlow_IT HAL_SPDIFRX_ReceiveCtrlFlow_IT
+#define HAL_SPDIFRX_ReceiveControlFlow_DMA HAL_SPDIFRX_ReceiveCtrlFlow_DMA
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32_HAL_LEGACY */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h
new file mode 100644
index 00000000..2035c367
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h
@@ -0,0 +1,281 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal.h
+ * @author MCD Application Team
+ * @brief This file contains all the functions prototypes for the HAL
+ * module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_H
+#define __STM32F7xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_conf.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HAL
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Constants HAL Exported Constants
+ * @{
+ */
+
+/** @defgroup HAL_TICK_FREQ Tick Frequency
+ * @{
+ */
+typedef enum
+{
+ HAL_TICK_FREQ_10HZ = 100U,
+ HAL_TICK_FREQ_100HZ = 10U,
+ HAL_TICK_FREQ_1KHZ = 1U,
+ HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ
+} HAL_TickFreqTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup SYSCFG_BootMode Boot Mode
+ * @{
+ */
+#define SYSCFG_MEM_BOOT_ADD0 ((uint32_t)0x00000000U)
+#define SYSCFG_MEM_BOOT_ADD1 SYSCFG_MEMRMP_MEM_BOOT
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HAL_Exported_Macros HAL Exported Macros
+ * @{
+ */
+
+/** @brief Freeze/Unfreeze Peripherals in Debug mode
+ */
+#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_DBGMCU_FREEZE_LPTIM1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_LPTIM1_STOP))
+#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_I2C4_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_CAN1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP))
+#define __HAL_DBGMCU_FREEZE_CAN2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM9() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM10() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM11() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP))
+
+#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_DBGMCU_UNFREEZE_LPTIM1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_LPTIM1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C4_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_CAN1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_CAN2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM9() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM10() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM11() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP))
+
+
+/** @brief FMC (NOR/RAM) mapped at 0x60000000 and SDRAM mapped at 0xC0000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_FMC() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_SWP_FMC))
+
+
+/** @brief FMC/SDRAM mapped at 0x60000000 (NOR/RAM) mapped at 0xC0000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_SWP_FMC);\
+ SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_SWP_FMC_0);\
+ }while(0);
+/**
+ * @brief Return the memory boot mapping as configured by user.
+ * @retval The boot mode as configured by user. The returned value can be one
+ * of the following values:
+ * @arg @ref SYSCFG_MEM_BOOT_ADD0
+ * @arg @ref SYSCFG_MEM_BOOT_ADD1
+ */
+#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_BOOT)
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/** @brief SYSCFG Break Cortex-M7 Lockup lock.
+ * Enable and lock the connection of Cortex-M7 LOCKUP (Hardfault) output to TIM1/8 Break input.
+ * @note The selected configuration is locked and can be unlocked only by system reset.
+ */
+#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() SET_BIT(SYSCFG->CBR, SYSCFG_CBR_CLL)
+
+/** @brief SYSCFG Break PVD lock.
+ * Enable and lock the PVD connection to Timer1/8 Break input, as well as the PVDE and PLS[2:0] in the PWR_CR1 register.
+ * @note The selected configuration is locked and can be unlocked only by system reset.
+ */
+#define __HAL_SYSCFG_BREAK_PVD_LOCK() SET_BIT(SYSCFG->CBR, SYSCFG_CBR_PVDL)
+#endif /* STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Private_Macros HAL Private Macros
+ * @{
+ */
+#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \
+ ((FREQ) == HAL_TICK_FREQ_100HZ) || \
+ ((FREQ) == HAL_TICK_FREQ_1KHZ))
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HAL_Exported_Functions
+ * @{
+ */
+/** @addtogroup HAL_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and Configuration functions ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority);
+/**
+ * @}
+ */
+
+/** @addtogroup HAL_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+void HAL_IncTick(void);
+void HAL_Delay(uint32_t Delay);
+uint32_t HAL_GetTick(void);
+uint32_t HAL_GetTickPrio(void);
+HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
+HAL_TickFreqTypeDef HAL_GetTickFreq(void);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+uint32_t HAL_GetUIDw0(void);
+uint32_t HAL_GetUIDw1(void);
+uint32_t HAL_GetUIDw2(void);
+void HAL_DBGMCU_EnableDBGSleepMode(void);
+void HAL_DBGMCU_DisableDBGSleepMode(void);
+void HAL_DBGMCU_EnableDBGStopMode(void);
+void HAL_DBGMCU_DisableDBGStopMode(void);
+void HAL_DBGMCU_EnableDBGStandbyMode(void);
+void HAL_DBGMCU_DisableDBGStandbyMode(void);
+void HAL_EnableCompensationCell(void);
+void HAL_DisableCompensationCell(void);
+void HAL_EnableFMCMemorySwapping(void);
+void HAL_DisableFMCMemorySwapping(void);
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+void HAL_EnableMemorySwappingBank(void);
+void HAL_DisableMemorySwappingBank(void);
+#endif /* STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Variables HAL Private Variables
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Constants HAL Private Constants
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h
new file mode 100644
index 00000000..699f074a
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h
@@ -0,0 +1,422 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_cortex.h
+ * @author MCD Application Team
+ * @brief Header file of CORTEX HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_CORTEX_H
+#define __STM32F7xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CORTEX
+ * @{
+ */
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CORTEX_Exported_Types Cortex Exported Types
+ * @{
+ */
+
+#if (__MPU_PRESENT == 1)
+/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
+ * @brief MPU Region initialization structure
+ * @{
+ */
+typedef struct
+{
+ uint8_t Enable; /*!< Specifies the status of the region.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Enable */
+ uint8_t Number; /*!< Specifies the number of the region to protect.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Number */
+ uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */
+ uint8_t Size; /*!< Specifies the size of the region to protect.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Size */
+ uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint8_t TypeExtField; /*!< Specifies the TEX field level.
+ This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */
+ uint8_t AccessPermission; /*!< Specifies the region access permission type.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */
+ uint8_t DisableExec; /*!< Specifies the instruction access status.
+ This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */
+ uint8_t IsShareable; /*!< Specifies the shareability status of the protected region.
+ This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */
+ uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected.
+ This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */
+ uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region.
+ This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */
+}MPU_Region_InitTypeDef;
+/**
+ * @}
+ */
+#endif /* __MPU_PRESENT */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
+ * @{
+ */
+
+/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
+ * @{
+ */
+#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007U) /*!< 0 bits for pre-emption priority
+ 4 bits for subpriority */
+#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006U) /*!< 1 bits for pre-emption priority
+ 3 bits for subpriority */
+#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005U) /*!< 2 bits for pre-emption priority
+ 2 bits for subpriority */
+#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004U) /*!< 3 bits for pre-emption priority
+ 1 bits for subpriority */
+#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003U) /*!< 4 bits for pre-emption priority
+ 0 bits for subpriority */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source
+ * @{
+ */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000U)
+#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004U)
+
+/**
+ * @}
+ */
+
+#if (__MPU_PRESENT == 1)
+/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
+ * @{
+ */
+#define MPU_HFNMI_PRIVDEF_NONE ((uint32_t)0x00000000U)
+#define MPU_HARDFAULT_NMI ((uint32_t)0x00000002U)
+#define MPU_PRIVILEGED_DEFAULT ((uint32_t)0x00000004U)
+#define MPU_HFNMI_PRIVDEF ((uint32_t)0x00000006U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
+ * @{
+ */
+#define MPU_REGION_ENABLE ((uint8_t)0x01U)
+#define MPU_REGION_DISABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
+ * @{
+ */
+#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00U)
+#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
+ * @{
+ */
+#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01U)
+#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
+ * @{
+ */
+#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01U)
+#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
+ * @{
+ */
+#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01U)
+#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
+ * @{
+ */
+#define MPU_TEX_LEVEL0 ((uint8_t)0x00U)
+#define MPU_TEX_LEVEL1 ((uint8_t)0x01U)
+#define MPU_TEX_LEVEL2 ((uint8_t)0x02U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
+ * @{
+ */
+#define MPU_REGION_SIZE_32B ((uint8_t)0x04U)
+#define MPU_REGION_SIZE_64B ((uint8_t)0x05U)
+#define MPU_REGION_SIZE_128B ((uint8_t)0x06U)
+#define MPU_REGION_SIZE_256B ((uint8_t)0x07U)
+#define MPU_REGION_SIZE_512B ((uint8_t)0x08U)
+#define MPU_REGION_SIZE_1KB ((uint8_t)0x09U)
+#define MPU_REGION_SIZE_2KB ((uint8_t)0x0AU)
+#define MPU_REGION_SIZE_4KB ((uint8_t)0x0BU)
+#define MPU_REGION_SIZE_8KB ((uint8_t)0x0CU)
+#define MPU_REGION_SIZE_16KB ((uint8_t)0x0DU)
+#define MPU_REGION_SIZE_32KB ((uint8_t)0x0EU)
+#define MPU_REGION_SIZE_64KB ((uint8_t)0x0FU)
+#define MPU_REGION_SIZE_128KB ((uint8_t)0x10U)
+#define MPU_REGION_SIZE_256KB ((uint8_t)0x11U)
+#define MPU_REGION_SIZE_512KB ((uint8_t)0x12U)
+#define MPU_REGION_SIZE_1MB ((uint8_t)0x13U)
+#define MPU_REGION_SIZE_2MB ((uint8_t)0x14U)
+#define MPU_REGION_SIZE_4MB ((uint8_t)0x15U)
+#define MPU_REGION_SIZE_8MB ((uint8_t)0x16U)
+#define MPU_REGION_SIZE_16MB ((uint8_t)0x17U)
+#define MPU_REGION_SIZE_32MB ((uint8_t)0x18U)
+#define MPU_REGION_SIZE_64MB ((uint8_t)0x19U)
+#define MPU_REGION_SIZE_128MB ((uint8_t)0x1AU)
+#define MPU_REGION_SIZE_256MB ((uint8_t)0x1BU)
+#define MPU_REGION_SIZE_512MB ((uint8_t)0x1CU)
+#define MPU_REGION_SIZE_1GB ((uint8_t)0x1DU)
+#define MPU_REGION_SIZE_2GB ((uint8_t)0x1EU)
+#define MPU_REGION_SIZE_4GB ((uint8_t)0x1FU)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes
+ * @{
+ */
+#define MPU_REGION_NO_ACCESS ((uint8_t)0x00U)
+#define MPU_REGION_PRIV_RW ((uint8_t)0x01U)
+#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02U)
+#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03U)
+#define MPU_REGION_PRIV_RO ((uint8_t)0x05U)
+#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
+ * @{
+ */
+#define MPU_REGION_NUMBER0 ((uint8_t)0x00U)
+#define MPU_REGION_NUMBER1 ((uint8_t)0x01U)
+#define MPU_REGION_NUMBER2 ((uint8_t)0x02U)
+#define MPU_REGION_NUMBER3 ((uint8_t)0x03U)
+#define MPU_REGION_NUMBER4 ((uint8_t)0x04U)
+#define MPU_REGION_NUMBER5 ((uint8_t)0x05U)
+#define MPU_REGION_NUMBER6 ((uint8_t)0x06U)
+#define MPU_REGION_NUMBER7 ((uint8_t)0x07U)
+/**
+ * @}
+ */
+#endif /* __MPU_PRESENT */
+
+/**
+ * @}
+ */
+
+
+/* Exported Macros -----------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CORTEX_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup CORTEX_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+/**
+ * @}
+ */
+
+/** @addtogroup CORTEX_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+#if (__MPU_PRESENT == 1)
+void HAL_MPU_Enable(uint32_t MPU_Control);
+void HAL_MPU_Disable(void);
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
+#endif /* __MPU_PRESENT */
+uint32_t HAL_NVIC_GetPriorityGrouping(void);
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
+ * @{
+ */
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_1) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_2) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_3) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
+
+#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x00)
+
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+ ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+
+#if (__MPU_PRESENT == 1)
+#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
+ ((STATE) == MPU_REGION_DISABLE))
+
+#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
+ ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
+
+#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \
+ ((STATE) == MPU_ACCESS_NOT_SHAREABLE))
+
+#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \
+ ((STATE) == MPU_ACCESS_NOT_CACHEABLE))
+
+#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \
+ ((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
+
+#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \
+ ((TYPE) == MPU_TEX_LEVEL1) || \
+ ((TYPE) == MPU_TEX_LEVEL2))
+
+#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \
+ ((TYPE) == MPU_REGION_PRIV_RW) || \
+ ((TYPE) == MPU_REGION_PRIV_RW_URO) || \
+ ((TYPE) == MPU_REGION_FULL_ACCESS) || \
+ ((TYPE) == MPU_REGION_PRIV_RO) || \
+ ((TYPE) == MPU_REGION_PRIV_RO_URO))
+
+#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \
+ ((NUMBER) == MPU_REGION_NUMBER1) || \
+ ((NUMBER) == MPU_REGION_NUMBER2) || \
+ ((NUMBER) == MPU_REGION_NUMBER3) || \
+ ((NUMBER) == MPU_REGION_NUMBER4) || \
+ ((NUMBER) == MPU_REGION_NUMBER5) || \
+ ((NUMBER) == MPU_REGION_NUMBER6) || \
+ ((NUMBER) == MPU_REGION_NUMBER7))
+
+#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \
+ ((SIZE) == MPU_REGION_SIZE_64B) || \
+ ((SIZE) == MPU_REGION_SIZE_128B) || \
+ ((SIZE) == MPU_REGION_SIZE_256B) || \
+ ((SIZE) == MPU_REGION_SIZE_512B) || \
+ ((SIZE) == MPU_REGION_SIZE_1KB) || \
+ ((SIZE) == MPU_REGION_SIZE_2KB) || \
+ ((SIZE) == MPU_REGION_SIZE_4KB) || \
+ ((SIZE) == MPU_REGION_SIZE_8KB) || \
+ ((SIZE) == MPU_REGION_SIZE_16KB) || \
+ ((SIZE) == MPU_REGION_SIZE_32KB) || \
+ ((SIZE) == MPU_REGION_SIZE_64KB) || \
+ ((SIZE) == MPU_REGION_SIZE_128KB) || \
+ ((SIZE) == MPU_REGION_SIZE_256KB) || \
+ ((SIZE) == MPU_REGION_SIZE_512KB) || \
+ ((SIZE) == MPU_REGION_SIZE_1MB) || \
+ ((SIZE) == MPU_REGION_SIZE_2MB) || \
+ ((SIZE) == MPU_REGION_SIZE_4MB) || \
+ ((SIZE) == MPU_REGION_SIZE_8MB) || \
+ ((SIZE) == MPU_REGION_SIZE_16MB) || \
+ ((SIZE) == MPU_REGION_SIZE_32MB) || \
+ ((SIZE) == MPU_REGION_SIZE_64MB) || \
+ ((SIZE) == MPU_REGION_SIZE_128MB) || \
+ ((SIZE) == MPU_REGION_SIZE_256MB) || \
+ ((SIZE) == MPU_REGION_SIZE_512MB) || \
+ ((SIZE) == MPU_REGION_SIZE_1GB) || \
+ ((SIZE) == MPU_REGION_SIZE_2GB) || \
+ ((SIZE) == MPU_REGION_SIZE_4GB))
+
+#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FFU)
+#endif /* __MPU_PRESENT */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_CORTEX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h
new file mode 100644
index 00000000..2aa3123d
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h
@@ -0,0 +1,221 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_def.h
+ * @author MCD Application Team
+ * @brief This file contains HAL common defines, enumeration, macros and
+ * structures definitions.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_DEF
+#define __STM32F7xx_HAL_DEF
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx.h"
+#include "Legacy/stm32_hal_legacy.h"
+#include
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL Status structures definition
+ */
+typedef enum
+{
+ HAL_OK = 0x00U,
+ HAL_ERROR = 0x01U,
+ HAL_BUSY = 0x02U,
+ HAL_TIMEOUT = 0x03U
+} HAL_StatusTypeDef;
+
+/**
+ * @brief HAL Lock structures definition
+ */
+typedef enum
+{
+ HAL_UNLOCKED = 0x00U,
+ HAL_LOCKED = 0x01U
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+
+#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */
+
+#define HAL_MAX_DELAY 0xFFFFFFFFU
+
+#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != RESET)
+#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == RESET)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
+ do{ \
+ (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
+ (__DMA_HANDLE__).Parent = (__HANDLE__); \
+ } while(0)
+
+/** @brief Reset the Handle's State field.
+ * @param __HANDLE__ specifies the Peripheral Handle.
+ * @note This macro can be used for the following purpose:
+ * - When the Handle is declared as local variable; before passing it as parameter
+ * to HAL_PPP_Init() for the first time, it is mandatory to use this macro
+ * to set to 0 the Handle's "State" field.
+ * Otherwise, "State" field may have any random value and the first time the function
+ * HAL_PPP_Init() is called, the low level hardware initialization will be missed
+ * (i.e. HAL_PPP_MspInit() will not be executed).
+ * - When there is a need to reconfigure the low level hardware: instead of calling
+ * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+ * In this later function, when the Handle's "State" field is set to 0, it will execute the function
+ * HAL_PPP_MspInit() which will reconfigure the low level hardware.
+ * @retval None
+ */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
+
+#if (USE_RTOS == 1U)
+ /* Reserved for future use */
+ #error "USE_RTOS should be 0 in the current HAL release"
+#else
+ #define __HAL_LOCK(__HANDLE__) \
+ do{ \
+ if((__HANDLE__)->Lock == HAL_LOCKED) \
+ { \
+ return HAL_BUSY; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Lock = HAL_LOCKED; \
+ } \
+ }while (0U)
+
+ #define __HAL_UNLOCK(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Lock = HAL_UNLOCKED; \
+ }while (0U)
+#endif /* USE_RTOS */
+
+#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
+ #ifndef __weak
+ #define __weak __attribute__((weak))
+ #endif /* __weak */
+ #ifndef __packed
+ #define __packed __attribute__((__packed__))
+ #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
+ #ifndef __ALIGN_END
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #define __ALIGN_BEGIN
+ #endif /* __ALIGN_BEGIN */
+#else
+ #ifndef __ALIGN_END
+ #define __ALIGN_END
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #endif /* __CC_ARM */
+ #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+/* Macro to get variable aligned on 32-bytes,needed for cache maintenance purpose */
+#if defined (__GNUC__) /* GNU Compiler */
+ #define ALIGN_32BYTES(buf) buf __attribute__ ((aligned (32)))
+#elif defined (__ICCARM__) /* IAR Compiler */
+ #define ALIGN_32BYTES(buf) _Pragma("data_alignment=32") buf
+#elif defined (__CC_ARM) /* ARM Compiler */
+ #define ALIGN_32BYTES(buf) __align(32) buf
+#endif
+
+/**
+ * @brief __RAM_FUNC definition
+ */
+#if defined ( __CC_ARM )
+/* ARM Compiler
+ ------------
+ RAM functions are defined using the toolchain options.
+ Functions that are executed in RAM should reside in a separate source module.
+ Using the 'Options for File' dialog you can simply change the 'Code / Const'
+ area of a module to a memory space in physical RAM.
+ Available memory areas are declared in the 'Target' tab of the 'Options for Target'
+ dialog.
+*/
+#define __RAM_FUNC
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+ RAM functions are defined using a specific toolchain keyword "__ramfunc".
+*/
+#define __RAM_FUNC __ramfunc
+
+#elif defined ( __GNUC__ )
+/* GNU Compiler
+ ------------
+ RAM functions are defined using a specific toolchain attribute
+ "__attribute__((section(".RamFunc")))".
+*/
+#define __RAM_FUNC __attribute__((section(".RamFunc")))
+
+#endif
+
+/**
+ * @brief __NOINLINE definition
+ */
+#if defined ( __CC_ARM ) || defined ( __GNUC__ )
+/* ARM & GNUCompiler
+ ----------------
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F7xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h
new file mode 100644
index 00000000..dfe6ff58
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h
@@ -0,0 +1,765 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_dma.h
+ * @author MCD Application Team
+ * @brief Header file of DMA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_DMA_H
+#define __STM32F7xx_HAL_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Types DMA Exported Types
+ * @brief DMA Exported Types
+ * @{
+ */
+
+/**
+ * @brief DMA Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Channel; /*!< Specifies the channel used for the specified stream.
+ This parameter can be a value of @ref DMAEx_Channel_selection */
+
+ uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
+ from memory to memory or from peripheral to memory.
+ This parameter can be a value of @ref DMA_Data_transfer_direction */
+
+ uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
+
+ uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Memory_incremented_mode */
+
+ uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
+ This parameter can be a value of @ref DMA_Peripheral_data_size */
+
+ uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
+ This parameter can be a value of @ref DMA_Memory_data_size */
+
+ uint32_t Mode; /*!< Specifies the operation mode of the DMAy Streamx.
+ This parameter can be a value of @ref DMA_mode
+ @note The circular buffer mode cannot be used if the memory-to-memory
+ data transfer is configured on the selected Stream */
+
+ uint32_t Priority; /*!< Specifies the software priority for the DMAy Streamx.
+ This parameter can be a value of @ref DMA_Priority_level */
+
+ uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream.
+ This parameter can be a value of @ref DMA_FIFO_direct_mode
+ @note The Direct mode (FIFO mode disabled) cannot be used if the
+ memory-to-memory data transfer is configured on the selected stream */
+
+ uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level.
+ This parameter can be a value of @ref DMA_FIFO_threshold_level */
+
+ uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers.
+ It specifies the amount of data to be transferred in a single non interruptible
+ transaction.
+ This parameter can be a value of @ref DMA_Memory_burst
+ @note The burst mode is possible only if the address Increment mode is enabled. */
+
+ uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers.
+ It specifies the amount of data to be transferred in a single non interruptible
+ transaction.
+ This parameter can be a value of @ref DMA_Peripheral_burst
+ @note The burst mode is possible only if the address Increment mode is enabled. */
+}DMA_InitTypeDef;
+
+/**
+ * @brief HAL DMA State structures definition
+ */
+typedef enum
+{
+ HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */
+ HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */
+ HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */
+ HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */
+ HAL_DMA_STATE_ERROR = 0x04U, /*!< DMA error state */
+ HAL_DMA_STATE_ABORT = 0x05U, /*!< DMA Abort state */
+}HAL_DMA_StateTypeDef;
+
+/**
+ * @brief HAL DMA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */
+ HAL_DMA_HALF_TRANSFER = 0x01U, /*!< Half Transfer */
+}HAL_DMA_LevelCompleteTypeDef;
+
+/**
+ * @brief HAL DMA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */
+ HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half Transfer */
+ HAL_DMA_XFER_M1CPLT_CB_ID = 0x02U, /*!< M1 Full Transfer */
+ HAL_DMA_XFER_M1HALFCPLT_CB_ID = 0x03U, /*!< M1 Half Transfer */
+ HAL_DMA_XFER_ERROR_CB_ID = 0x04U, /*!< Error */
+ HAL_DMA_XFER_ABORT_CB_ID = 0x05U, /*!< Abort */
+ HAL_DMA_XFER_ALL_CB_ID = 0x06U /*!< All */
+}HAL_DMA_CallbackIDTypeDef;
+
+/**
+ * @brief DMA handle Structure definition
+ */
+typedef struct __DMA_HandleTypeDef
+{
+ DMA_Stream_TypeDef *Instance; /*!< Register base address */
+
+ DMA_InitTypeDef Init; /*!< DMA communication parameters */
+
+ HAL_LockTypeDef Lock; /*!< DMA locking object */
+
+ __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
+
+ void *Parent; /*!< Parent object state */
+
+ void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
+
+ void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
+
+ void (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete Memory1 callback */
+
+ void (* XferM1HalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Half complete Memory1 callback */
+
+ void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
+
+ void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Abort callback */
+
+ __IO uint32_t ErrorCode; /*!< DMA Error code */
+
+ uint32_t StreamBaseAddress; /*!< DMA Stream Base Address */
+
+ uint32_t StreamIndex; /*!< DMA Stream Index */
+
+}DMA_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Constants DMA Exported Constants
+ * @brief DMA Exported constants
+ * @{
+ */
+
+/** @defgroup DMA_Error_Code DMA Error Code
+ * @brief DMA Error Code
+ * @{
+ */
+#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */
+#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */
+#define HAL_DMA_ERROR_FE 0x00000002U /*!< FIFO error */
+#define HAL_DMA_ERROR_DME 0x00000004U /*!< Direct Mode error */
+#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */
+#define HAL_DMA_ERROR_PARAM 0x00000040U /*!< Parameter error */
+#define HAL_DMA_ERROR_NO_XFER 0x00000080U /*!< Abort requested with no Xfer ongoing */
+#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
+ * @brief DMA data transfer direction
+ * @{
+ */
+#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH DMA_SxCR_DIR_0 /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY DMA_SxCR_DIR_1 /*!< Memory to memory direction */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
+ * @brief DMA peripheral incremented mode
+ * @{
+ */
+#define DMA_PINC_ENABLE DMA_SxCR_PINC /*!< Peripheral increment mode enable */
+#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
+ * @brief DMA memory incremented mode
+ * @{
+ */
+#define DMA_MINC_ENABLE DMA_SxCR_MINC /*!< Memory increment mode enable */
+#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
+ * @brief DMA peripheral data size
+ * @{
+ */
+#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment: Byte */
+#define DMA_PDATAALIGN_HALFWORD DMA_SxCR_PSIZE_0 /*!< Peripheral data alignment: HalfWord */
+#define DMA_PDATAALIGN_WORD DMA_SxCR_PSIZE_1 /*!< Peripheral data alignment: Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_data_size DMA Memory data size
+ * @brief DMA memory data size
+ * @{
+ */
+#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment: Byte */
+#define DMA_MDATAALIGN_HALFWORD DMA_SxCR_MSIZE_0 /*!< Memory data alignment: HalfWord */
+#define DMA_MDATAALIGN_WORD DMA_SxCR_MSIZE_1 /*!< Memory data alignment: Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_mode DMA mode
+ * @brief DMA mode
+ * @{
+ */
+#define DMA_NORMAL 0x00000000U /*!< Normal mode */
+#define DMA_CIRCULAR DMA_SxCR_CIRC /*!< Circular mode */
+#define DMA_PFCTRL DMA_SxCR_PFCTRL /*!< Peripheral flow control mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Priority_level DMA Priority level
+ * @brief DMA priority levels
+ * @{
+ */
+#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level: Low */
+#define DMA_PRIORITY_MEDIUM DMA_SxCR_PL_0 /*!< Priority level: Medium */
+#define DMA_PRIORITY_HIGH DMA_SxCR_PL_1 /*!< Priority level: High */
+#define DMA_PRIORITY_VERY_HIGH DMA_SxCR_PL /*!< Priority level: Very High */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode
+ * @brief DMA FIFO direct mode
+ * @{
+ */
+#define DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */
+#define DMA_FIFOMODE_ENABLE DMA_SxFCR_DMDIS /*!< FIFO mode enable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level
+ * @brief DMA FIFO level
+ * @{
+ */
+#define DMA_FIFO_THRESHOLD_1QUARTERFULL 0x00000000U /*!< FIFO threshold 1 quart full configuration */
+#define DMA_FIFO_THRESHOLD_HALFFULL DMA_SxFCR_FTH_0 /*!< FIFO threshold half full configuration */
+#define DMA_FIFO_THRESHOLD_3QUARTERSFULL DMA_SxFCR_FTH_1 /*!< FIFO threshold 3 quarts full configuration */
+#define DMA_FIFO_THRESHOLD_FULL DMA_SxFCR_FTH /*!< FIFO threshold full configuration */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_burst DMA Memory burst
+ * @brief DMA memory burst
+ * @{
+ */
+#define DMA_MBURST_SINGLE 0x00000000U
+#define DMA_MBURST_INC4 DMA_SxCR_MBURST_0
+#define DMA_MBURST_INC8 DMA_SxCR_MBURST_1
+#define DMA_MBURST_INC16 DMA_SxCR_MBURST
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_burst DMA Peripheral burst
+ * @brief DMA peripheral burst
+ * @{
+ */
+#define DMA_PBURST_SINGLE 0x00000000U
+#define DMA_PBURST_INC4 DMA_SxCR_PBURST_0
+#define DMA_PBURST_INC8 DMA_SxCR_PBURST_1
+#define DMA_PBURST_INC16 DMA_SxCR_PBURST
+/**
+ * @}
+ */
+
+/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
+ * @brief DMA interrupts definition
+ * @{
+ */
+#define DMA_IT_TC DMA_SxCR_TCIE
+#define DMA_IT_HT DMA_SxCR_HTIE
+#define DMA_IT_TE DMA_SxCR_TEIE
+#define DMA_IT_DME DMA_SxCR_DMEIE
+#define DMA_IT_FE 0x00000080U
+/**
+ * @}
+ */
+
+/** @defgroup DMA_flag_definitions DMA flag definitions
+ * @brief DMA flag definitions
+ * @{
+ */
+#define DMA_FLAG_FEIF0_4 0x00000001U
+#define DMA_FLAG_DMEIF0_4 0x00000004U
+#define DMA_FLAG_TEIF0_4 0x00000008U
+#define DMA_FLAG_HTIF0_4 0x00000010U
+#define DMA_FLAG_TCIF0_4 0x00000020U
+#define DMA_FLAG_FEIF1_5 0x00000040U
+#define DMA_FLAG_DMEIF1_5 0x00000100U
+#define DMA_FLAG_TEIF1_5 0x00000200U
+#define DMA_FLAG_HTIF1_5 0x00000400U
+#define DMA_FLAG_TCIF1_5 0x00000800U
+#define DMA_FLAG_FEIF2_6 0x00010000U
+#define DMA_FLAG_DMEIF2_6 0x00040000U
+#define DMA_FLAG_TEIF2_6 0x00080000U
+#define DMA_FLAG_HTIF2_6 0x00100000U
+#define DMA_FLAG_TCIF2_6 0x00200000U
+#define DMA_FLAG_FEIF3_7 0x00400000U
+#define DMA_FLAG_DMEIF3_7 0x01000000U
+#define DMA_FLAG_TEIF3_7 0x02000000U
+#define DMA_FLAG_HTIF3_7 0x04000000U
+#define DMA_FLAG_TCIF3_7 0x08000000U
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset DMA handle state
+ * @param __HANDLE__ specifies the DMA handle.
+ * @retval None
+ */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+ * @brief Return the current DMA Stream FIFO filled level.
+ * @param __HANDLE__ DMA handle
+ * @retval The FIFO filling state.
+ * - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full
+ * and not empty.
+ * - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full.
+ * - DMA_FIFOStatus_HalfFull: if more than 1 half-full.
+ * - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full.
+ * - DMA_FIFOStatus_Empty: when FIFO is empty
+ * - DMA_FIFOStatus_Full: when FIFO is full
+ */
+#define __HAL_DMA_GET_FS(__HANDLE__) (((__HANDLE__)->Instance->FCR & (DMA_SxFCR_FS)))
+
+/**
+ * @brief Enable the specified DMA Stream.
+ * @param __HANDLE__ DMA handle
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA_SxCR_EN)
+
+/**
+ * @brief Disable the specified DMA Stream.
+ * @param __HANDLE__ DMA handle
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA_SxCR_EN)
+
+/* Interrupt & Flag management */
+
+/**
+ * @brief Return the current DMA Stream transfer complete flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\
+ DMA_FLAG_TCIF3_7)
+
+/**
+ * @brief Return the current DMA Stream half transfer complete flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\
+ DMA_FLAG_HTIF3_7)
+
+/**
+ * @brief Return the current DMA Stream transfer error flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\
+ DMA_FLAG_TEIF3_7)
+
+/**
+ * @brief Return the current DMA Stream FIFO error flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified FIFO error flag index.
+ */
+#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\
+ DMA_FLAG_FEIF3_7)
+
+/**
+ * @brief Return the current DMA Stream direct mode error flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified direct mode error flag index.
+ */
+#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\
+ DMA_FLAG_DMEIF3_7)
+
+/**
+ * @brief Get the DMA Stream pending flags.
+ * @param __HANDLE__ DMA handle
+ * @param __FLAG__ Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCIFx: Transfer complete flag.
+ * @arg DMA_FLAG_HTIFx: Half transfer complete flag.
+ * @arg DMA_FLAG_TEIFx: Transfer error flag.
+ * @arg DMA_FLAG_DMEIFx: Direct mode error flag.
+ * @arg DMA_FLAG_FEIFx: FIFO error flag.
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__)))
+
+/**
+ * @brief Clear the DMA Stream pending flags.
+ * @param __HANDLE__ DMA handle
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCIFx: Transfer complete flag.
+ * @arg DMA_FLAG_HTIFx: Half transfer complete flag.
+ * @arg DMA_FLAG_TEIFx: Transfer error flag.
+ * @arg DMA_FLAG_DMEIFx: Direct mode error flag.
+ * @arg DMA_FLAG_FEIFx: FIFO error flag.
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__)))
+
+/**
+ * @brief Enable the specified DMA Stream interrupts.
+ * @param __HANDLE__ DMA handle
+ * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask.
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask.
+ * @arg DMA_IT_TE: Transfer error interrupt mask.
+ * @arg DMA_IT_FE: FIFO error interrupt mask.
+ * @arg DMA_IT_DME: Direct mode error interrupt.
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
+((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__)))
+
+/**
+ * @brief Disable the specified DMA Stream interrupts.
+ * @param __HANDLE__ DMA handle
+ * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask.
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask.
+ * @arg DMA_IT_TE: Transfer error interrupt mask.
+ * @arg DMA_IT_FE: FIFO error interrupt mask.
+ * @arg DMA_IT_DME: Direct mode error interrupt.
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
+((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__)))
+
+/**
+ * @brief Check whether the specified DMA Stream interrupt is enabled or not.
+ * @param __HANDLE__ DMA handle
+ * @param __INTERRUPT__ specifies the DMA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask.
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask.
+ * @arg DMA_IT_TE: Transfer error interrupt mask.
+ * @arg DMA_IT_FE: FIFO error interrupt mask.
+ * @arg DMA_IT_DME: Direct mode error interrupt.
+ * @retval The state of DMA_IT.
+ */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
+ ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \
+ ((__HANDLE__)->Instance->FCR & (__INTERRUPT__)))
+
+/**
+ * @brief Writes the number of data units to be transferred on the DMA Stream.
+ * @param __HANDLE__ DMA handle
+ * @param __COUNTER__ Number of data units to be transferred (from 0 to 65535)
+ * Number of data items depends only on the Peripheral data format.
+ *
+ * @note If Peripheral data format is Bytes: number of data units is equal
+ * to total number of bytes to be transferred.
+ *
+ * @note If Peripheral data format is Half-Word: number of data units is
+ * equal to total number of bytes to be transferred / 2.
+ *
+ * @note If Peripheral data format is Word: number of data units is equal
+ * to total number of bytes to be transferred / 4.
+ *
+ * @retval The number of remaining data units in the current DMAy Streamx transfer.
+ */
+#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->NDTR = (uint16_t)(__COUNTER__))
+
+/**
+ * @brief Returns the number of remaining data units in the current DMAy Streamx transfer.
+ * @param __HANDLE__ DMA handle
+ *
+ * @retval The number of remaining data units in the current DMA Stream transfer.
+ */
+#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->NDTR)
+
+
+/* Include DMA HAL Extension module */
+#include "stm32f7xx_hal_dma_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Functions DMA Exported Functions
+ * @brief DMA Exported functions
+ * @{
+ */
+
+/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions
+ * @brief I/O operation functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout);
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma));
+HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions
+ * @brief Peripheral State functions
+ * @{
+ */
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+/* Private Constants -------------------------------------------------------------*/
+/** @defgroup DMA_Private_Constants DMA Private Constants
+ * @brief DMA private defines and constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMA_Private_Macros DMA Private Macros
+ * @brief DMA private macros
+ * @{
+ */
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+ ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
+ ((DIRECTION) == DMA_MEMORY_TO_MEMORY))
+
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x01U) && ((SIZE) < 0x10000U))
+
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+ ((STATE) == DMA_PINC_DISABLE))
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
+ ((STATE) == DMA_MINC_DISABLE))
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_PDATAALIGN_WORD))
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_MDATAALIGN_WORD ))
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
+ ((MODE) == DMA_CIRCULAR) || \
+ ((MODE) == DMA_PFCTRL))
+
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
+ ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+ ((PRIORITY) == DMA_PRIORITY_HIGH) || \
+ ((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
+
+#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \
+ ((STATE) == DMA_FIFOMODE_ENABLE))
+
+#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \
+ ((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL) || \
+ ((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \
+ ((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL))
+
+#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \
+ ((BURST) == DMA_MBURST_INC4) || \
+ ((BURST) == DMA_MBURST_INC8) || \
+ ((BURST) == DMA_MBURST_INC16))
+
+#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \
+ ((BURST) == DMA_PBURST_INC4) || \
+ ((BURST) == DMA_PBURST_INC8) || \
+ ((BURST) == DMA_PBURST_INC16))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DMA_Private_Functions DMA Private Functions
+ * @brief DMA private functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h
new file mode 100644
index 00000000..f4ad27c6
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h
@@ -0,0 +1,201 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_dma_ex.h
+ * @author MCD Application Team
+ * @brief Header file of DMA HAL extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_DMA_EX_H
+#define __STM32F7xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMAEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Types DMAEx Exported Types
+ * @brief DMAEx Exported types
+ * @{
+ */
+
+/**
+ * @brief HAL DMA Memory definition
+ */
+typedef enum
+{
+ MEMORY0 = 0x00U, /*!< Memory 0 */
+ MEMORY1 = 0x01U, /*!< Memory 1 */
+
+}HAL_DMA_MemoryTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Constants DMA Exported Constants
+ * @brief DMA Exported constants
+ * @{
+ */
+
+/** @defgroup DMAEx_Channel_selection DMA Channel selection
+ * @brief DMAEx channel selection
+ * @{
+ */
+#define DMA_CHANNEL_0 0x00000000U /*!< DMA Channel 0 */
+#define DMA_CHANNEL_1 0x02000000U /*!< DMA Channel 1 */
+#define DMA_CHANNEL_2 0x04000000U /*!< DMA Channel 2 */
+#define DMA_CHANNEL_3 0x06000000U /*!< DMA Channel 3 */
+#define DMA_CHANNEL_4 0x08000000U /*!< DMA Channel 4 */
+#define DMA_CHANNEL_5 0x0A000000U /*!< DMA Channel 5 */
+#define DMA_CHANNEL_6 0x0C000000U /*!< DMA Channel 6 */
+#define DMA_CHANNEL_7 0x0E000000U /*!< DMA Channel 7 */
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
+ defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
+ defined (STM32F779xx)
+#define DMA_CHANNEL_8 0x10000000U /*!< DMA Channel 8 */
+#define DMA_CHANNEL_9 0x12000000U /*!< DMA Channel 9 */
+#define DMA_CHANNEL_10 0x14000000U /*!< DMA Channel 10*/
+#define DMA_CHANNEL_11 0x16000000U /*!< DMA Channel 11*/
+#define DMA_CHANNEL_12 0x18000000U /*!< DMA Channel 12*/
+#define DMA_CHANNEL_13 0x1A000000U /*!< DMA Channel 13*/
+#define DMA_CHANNEL_14 0x1C000000U /*!< DMA Channel 14*/
+#define DMA_CHANNEL_15 0x1E000000U /*!< DMA Channel 15*/
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
+ STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
+ * @brief DMAEx Exported functions
+ * @{
+ */
+
+/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ * @{
+ */
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory);
+
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMAEx_Private_Macros DMA Private Macros
+ * @brief DMAEx private macros
+ * @{
+ */
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
+ defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
+ defined (STM32F779xx)
+#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \
+ ((CHANNEL) == DMA_CHANNEL_1) || \
+ ((CHANNEL) == DMA_CHANNEL_2) || \
+ ((CHANNEL) == DMA_CHANNEL_3) || \
+ ((CHANNEL) == DMA_CHANNEL_4) || \
+ ((CHANNEL) == DMA_CHANNEL_5) || \
+ ((CHANNEL) == DMA_CHANNEL_6) || \
+ ((CHANNEL) == DMA_CHANNEL_7) || \
+ ((CHANNEL) == DMA_CHANNEL_8) || \
+ ((CHANNEL) == DMA_CHANNEL_9) || \
+ ((CHANNEL) == DMA_CHANNEL_10) || \
+ ((CHANNEL) == DMA_CHANNEL_11) || \
+ ((CHANNEL) == DMA_CHANNEL_12) || \
+ ((CHANNEL) == DMA_CHANNEL_13) || \
+ ((CHANNEL) == DMA_CHANNEL_14) || \
+ ((CHANNEL) == DMA_CHANNEL_15))
+#else
+#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \
+ ((CHANNEL) == DMA_CHANNEL_1) || \
+ ((CHANNEL) == DMA_CHANNEL_2) || \
+ ((CHANNEL) == DMA_CHANNEL_3) || \
+ ((CHANNEL) == DMA_CHANNEL_4) || \
+ ((CHANNEL) == DMA_CHANNEL_5) || \
+ ((CHANNEL) == DMA_CHANNEL_6) || \
+ ((CHANNEL) == DMA_CHANNEL_7))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
+ STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DMAEx_Private_Functions DMAEx Private Functions
+ * @brief DMAEx Private functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_eth.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_eth.h
new file mode 100644
index 00000000..1f84c99d
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_eth.h
@@ -0,0 +1,2184 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_eth.h
+ * @author MCD Application Team
+ * @brief Header file of ETH HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_ETH_H
+#define __STM32F7xx_HAL_ETH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+#if defined (ETH)
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ETH
+ * @{
+ */
+
+/** @addtogroup ETH_Private_Macros
+ * @{
+ */
+#define IS_ETH_PHY_ADDRESS(ADDRESS) ((ADDRESS) <= 0x20)
+#define IS_ETH_AUTONEGOTIATION(CMD) (((CMD) == ETH_AUTONEGOTIATION_ENABLE) || \
+ ((CMD) == ETH_AUTONEGOTIATION_DISABLE))
+#define IS_ETH_SPEED(SPEED) (((SPEED) == ETH_SPEED_10M) || \
+ ((SPEED) == ETH_SPEED_100M))
+#define IS_ETH_DUPLEX_MODE(MODE) (((MODE) == ETH_MODE_FULLDUPLEX) || \
+ ((MODE) == ETH_MODE_HALFDUPLEX))
+#define IS_ETH_RX_MODE(MODE) (((MODE) == ETH_RXPOLLING_MODE) || \
+ ((MODE) == ETH_RXINTERRUPT_MODE))
+#define IS_ETH_CHECKSUM_MODE(MODE) (((MODE) == ETH_CHECKSUM_BY_HARDWARE) || \
+ ((MODE) == ETH_CHECKSUM_BY_SOFTWARE))
+#define IS_ETH_MEDIA_INTERFACE(MODE) (((MODE) == ETH_MEDIA_INTERFACE_MII) || \
+ ((MODE) == ETH_MEDIA_INTERFACE_RMII))
+#define IS_ETH_WATCHDOG(CMD) (((CMD) == ETH_WATCHDOG_ENABLE) || \
+ ((CMD) == ETH_WATCHDOG_DISABLE))
+#define IS_ETH_JABBER(CMD) (((CMD) == ETH_JABBER_ENABLE) || \
+ ((CMD) == ETH_JABBER_DISABLE))
+#define IS_ETH_INTER_FRAME_GAP(GAP) (((GAP) == ETH_INTERFRAMEGAP_96BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_88BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_80BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_72BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_64BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_56BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_48BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_40BIT))
+#define IS_ETH_CARRIER_SENSE(CMD) (((CMD) == ETH_CARRIERSENCE_ENABLE) || \
+ ((CMD) == ETH_CARRIERSENCE_DISABLE))
+#define IS_ETH_RECEIVE_OWN(CMD) (((CMD) == ETH_RECEIVEOWN_ENABLE) || \
+ ((CMD) == ETH_RECEIVEOWN_DISABLE))
+#define IS_ETH_LOOPBACK_MODE(CMD) (((CMD) == ETH_LOOPBACKMODE_ENABLE) || \
+ ((CMD) == ETH_LOOPBACKMODE_DISABLE))
+#define IS_ETH_CHECKSUM_OFFLOAD(CMD) (((CMD) == ETH_CHECKSUMOFFLAOD_ENABLE) || \
+ ((CMD) == ETH_CHECKSUMOFFLAOD_DISABLE))
+#define IS_ETH_RETRY_TRANSMISSION(CMD) (((CMD) == ETH_RETRYTRANSMISSION_ENABLE) || \
+ ((CMD) == ETH_RETRYTRANSMISSION_DISABLE))
+#define IS_ETH_AUTOMATIC_PADCRC_STRIP(CMD) (((CMD) == ETH_AUTOMATICPADCRCSTRIP_ENABLE) || \
+ ((CMD) == ETH_AUTOMATICPADCRCSTRIP_DISABLE))
+#define IS_ETH_BACKOFF_LIMIT(LIMIT) (((LIMIT) == ETH_BACKOFFLIMIT_10) || \
+ ((LIMIT) == ETH_BACKOFFLIMIT_8) || \
+ ((LIMIT) == ETH_BACKOFFLIMIT_4) || \
+ ((LIMIT) == ETH_BACKOFFLIMIT_1))
+#define IS_ETH_DEFERRAL_CHECK(CMD) (((CMD) == ETH_DEFFERRALCHECK_ENABLE) || \
+ ((CMD) == ETH_DEFFERRALCHECK_DISABLE))
+#define IS_ETH_RECEIVE_ALL(CMD) (((CMD) == ETH_RECEIVEALL_ENABLE) || \
+ ((CMD) == ETH_RECEIVEAll_DISABLE))
+#define IS_ETH_SOURCE_ADDR_FILTER(CMD) (((CMD) == ETH_SOURCEADDRFILTER_NORMAL_ENABLE) || \
+ ((CMD) == ETH_SOURCEADDRFILTER_INVERSE_ENABLE) || \
+ ((CMD) == ETH_SOURCEADDRFILTER_DISABLE))
+#define IS_ETH_CONTROL_FRAMES(PASS) (((PASS) == ETH_PASSCONTROLFRAMES_BLOCKALL) || \
+ ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDALL) || \
+ ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER))
+#define IS_ETH_BROADCAST_FRAMES_RECEPTION(CMD) (((CMD) == ETH_BROADCASTFRAMESRECEPTION_ENABLE) || \
+ ((CMD) == ETH_BROADCASTFRAMESRECEPTION_DISABLE))
+#define IS_ETH_DESTINATION_ADDR_FILTER(FILTER) (((FILTER) == ETH_DESTINATIONADDRFILTER_NORMAL) || \
+ ((FILTER) == ETH_DESTINATIONADDRFILTER_INVERSE))
+#define IS_ETH_PROMISCUOUS_MODE(CMD) (((CMD) == ETH_PROMISCUOUS_MODE_ENABLE) || \
+ ((CMD) == ETH_PROMISCUOUS_MODE_DISABLE))
+#define IS_ETH_MULTICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE) || \
+ ((FILTER) == ETH_MULTICASTFRAMESFILTER_HASHTABLE) || \
+ ((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECT) || \
+ ((FILTER) == ETH_MULTICASTFRAMESFILTER_NONE))
+#define IS_ETH_UNICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE) || \
+ ((FILTER) == ETH_UNICASTFRAMESFILTER_HASHTABLE) || \
+ ((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECT))
+#define IS_ETH_PAUSE_TIME(TIME) ((TIME) <= 0xFFFF)
+#define IS_ETH_ZEROQUANTA_PAUSE(CMD) (((CMD) == ETH_ZEROQUANTAPAUSE_ENABLE) || \
+ ((CMD) == ETH_ZEROQUANTAPAUSE_DISABLE))
+#define IS_ETH_PAUSE_LOW_THRESHOLD(THRESHOLD) (((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS4) || \
+ ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS28) || \
+ ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS144) || \
+ ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS256))
+#define IS_ETH_UNICAST_PAUSE_FRAME_DETECT(CMD) (((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_ENABLE) || \
+ ((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_DISABLE))
+#define IS_ETH_RECEIVE_FLOWCONTROL(CMD) (((CMD) == ETH_RECEIVEFLOWCONTROL_ENABLE) || \
+ ((CMD) == ETH_RECEIVEFLOWCONTROL_DISABLE))
+#define IS_ETH_TRANSMIT_FLOWCONTROL(CMD) (((CMD) == ETH_TRANSMITFLOWCONTROL_ENABLE) || \
+ ((CMD) == ETH_TRANSMITFLOWCONTROL_DISABLE))
+#define IS_ETH_VLAN_TAG_COMPARISON(COMPARISON) (((COMPARISON) == ETH_VLANTAGCOMPARISON_12BIT) || \
+ ((COMPARISON) == ETH_VLANTAGCOMPARISON_16BIT))
+#define IS_ETH_VLAN_TAG_IDENTIFIER(IDENTIFIER) ((IDENTIFIER) <= 0xFFFF)
+#define IS_ETH_MAC_ADDRESS0123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS0) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS1) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS2) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS3))
+#define IS_ETH_MAC_ADDRESS123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS1) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS2) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS3))
+#define IS_ETH_MAC_ADDRESS_FILTER(FILTER) (((FILTER) == ETH_MAC_ADDRESSFILTER_SA) || \
+ ((FILTER) == ETH_MAC_ADDRESSFILTER_DA))
+#define IS_ETH_MAC_ADDRESS_MASK(MASK) (((MASK) == ETH_MAC_ADDRESSMASK_BYTE6) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE5) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE4) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE3) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE2) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE1))
+#define IS_ETH_DROP_TCPIP_CHECKSUM_FRAME(CMD) (((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE) || \
+ ((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE))
+#define IS_ETH_RECEIVE_STORE_FORWARD(CMD) (((CMD) == ETH_RECEIVESTOREFORWARD_ENABLE) || \
+ ((CMD) == ETH_RECEIVESTOREFORWARD_DISABLE))
+#define IS_ETH_FLUSH_RECEIVE_FRAME(CMD) (((CMD) == ETH_FLUSHRECEIVEDFRAME_ENABLE) || \
+ ((CMD) == ETH_FLUSHRECEIVEDFRAME_DISABLE))
+#define IS_ETH_TRANSMIT_STORE_FORWARD(CMD) (((CMD) == ETH_TRANSMITSTOREFORWARD_ENABLE) || \
+ ((CMD) == ETH_TRANSMITSTOREFORWARD_DISABLE))
+#define IS_ETH_TRANSMIT_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_64BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_128BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_192BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_256BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_40BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_32BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_24BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_16BYTES))
+#define IS_ETH_FORWARD_ERROR_FRAMES(CMD) (((CMD) == ETH_FORWARDERRORFRAMES_ENABLE) || \
+ ((CMD) == ETH_FORWARDERRORFRAMES_DISABLE))
+#define IS_ETH_FORWARD_UNDERSIZED_GOOD_FRAMES(CMD) (((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE) || \
+ ((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE))
+#define IS_ETH_RECEIVE_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES) || \
+ ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES) || \
+ ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES) || \
+ ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES))
+#define IS_ETH_SECOND_FRAME_OPERATE(CMD) (((CMD) == ETH_SECONDFRAMEOPERARTE_ENABLE) || \
+ ((CMD) == ETH_SECONDFRAMEOPERARTE_DISABLE))
+#define IS_ETH_ADDRESS_ALIGNED_BEATS(CMD) (((CMD) == ETH_ADDRESSALIGNEDBEATS_ENABLE) || \
+ ((CMD) == ETH_ADDRESSALIGNEDBEATS_DISABLE))
+#define IS_ETH_FIXED_BURST(CMD) (((CMD) == ETH_FIXEDBURST_ENABLE) || \
+ ((CMD) == ETH_FIXEDBURST_DISABLE))
+#define IS_ETH_RXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_RXDMABURSTLENGTH_1BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_2BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_8BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_16BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_32BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_4BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_8BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_16BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_32BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_64BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_128BEAT))
+#define IS_ETH_TXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_TXDMABURSTLENGTH_1BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_2BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_8BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_16BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_32BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_4BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_8BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_16BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_32BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_64BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_128BEAT))
+#define IS_ETH_DMA_DESC_SKIP_LENGTH(LENGTH) ((LENGTH) <= 0x1F)
+#define IS_ETH_DMA_ARBITRATION_ROUNDROBIN_RXTX(RATIO) (((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_RXPRIORTX))
+#define IS_ETH_DMATXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMATXDESC_OWN) || \
+ ((FLAG) == ETH_DMATXDESC_IC) || \
+ ((FLAG) == ETH_DMATXDESC_LS) || \
+ ((FLAG) == ETH_DMATXDESC_FS) || \
+ ((FLAG) == ETH_DMATXDESC_DC) || \
+ ((FLAG) == ETH_DMATXDESC_DP) || \
+ ((FLAG) == ETH_DMATXDESC_TTSE) || \
+ ((FLAG) == ETH_DMATXDESC_TER) || \
+ ((FLAG) == ETH_DMATXDESC_TCH) || \
+ ((FLAG) == ETH_DMATXDESC_TTSS) || \
+ ((FLAG) == ETH_DMATXDESC_IHE) || \
+ ((FLAG) == ETH_DMATXDESC_ES) || \
+ ((FLAG) == ETH_DMATXDESC_JT) || \
+ ((FLAG) == ETH_DMATXDESC_FF) || \
+ ((FLAG) == ETH_DMATXDESC_PCE) || \
+ ((FLAG) == ETH_DMATXDESC_LCA) || \
+ ((FLAG) == ETH_DMATXDESC_NC) || \
+ ((FLAG) == ETH_DMATXDESC_LCO) || \
+ ((FLAG) == ETH_DMATXDESC_EC) || \
+ ((FLAG) == ETH_DMATXDESC_VF) || \
+ ((FLAG) == ETH_DMATXDESC_CC) || \
+ ((FLAG) == ETH_DMATXDESC_ED) || \
+ ((FLAG) == ETH_DMATXDESC_UF) || \
+ ((FLAG) == ETH_DMATXDESC_DB))
+#define IS_ETH_DMA_TXDESC_SEGMENT(SEGMENT) (((SEGMENT) == ETH_DMATXDESC_LASTSEGMENTS) || \
+ ((SEGMENT) == ETH_DMATXDESC_FIRSTSEGMENT))
+#define IS_ETH_DMA_TXDESC_CHECKSUM(CHECKSUM) (((CHECKSUM) == ETH_DMATXDESC_CHECKSUMBYPASS) || \
+ ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMIPV4HEADER) || \
+ ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT) || \
+ ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL))
+#define IS_ETH_DMATXDESC_BUFFER_SIZE(SIZE) ((SIZE) <= 0x1FFF)
+#define IS_ETH_DMARXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMARXDESC_OWN) || \
+ ((FLAG) == ETH_DMARXDESC_AFM) || \
+ ((FLAG) == ETH_DMARXDESC_ES) || \
+ ((FLAG) == ETH_DMARXDESC_DE) || \
+ ((FLAG) == ETH_DMARXDESC_SAF) || \
+ ((FLAG) == ETH_DMARXDESC_LE) || \
+ ((FLAG) == ETH_DMARXDESC_OE) || \
+ ((FLAG) == ETH_DMARXDESC_VLAN) || \
+ ((FLAG) == ETH_DMARXDESC_FS) || \
+ ((FLAG) == ETH_DMARXDESC_LS) || \
+ ((FLAG) == ETH_DMARXDESC_IPV4HCE) || \
+ ((FLAG) == ETH_DMARXDESC_LC) || \
+ ((FLAG) == ETH_DMARXDESC_FT) || \
+ ((FLAG) == ETH_DMARXDESC_RWT) || \
+ ((FLAG) == ETH_DMARXDESC_RE) || \
+ ((FLAG) == ETH_DMARXDESC_DBE) || \
+ ((FLAG) == ETH_DMARXDESC_CE) || \
+ ((FLAG) == ETH_DMARXDESC_MAMPCE))
+#define IS_ETH_DMA_RXDESC_BUFFER(BUFFER) (((BUFFER) == ETH_DMARXDESC_BUFFER1) || \
+ ((BUFFER) == ETH_DMARXDESC_BUFFER2))
+#define IS_ETH_PMT_GET_FLAG(FLAG) (((FLAG) == ETH_PMT_FLAG_WUFR) || \
+ ((FLAG) == ETH_PMT_FLAG_MPR))
+#define IS_ETH_DMA_FLAG(FLAG) ((((FLAG) & (uint32_t)0xC7FE1800) == 0x00) && ((FLAG) != 0x00))
+#define IS_ETH_DMA_GET_FLAG(FLAG) (((FLAG) == ETH_DMA_FLAG_TST) || ((FLAG) == ETH_DMA_FLAG_PMT) || \
+ ((FLAG) == ETH_DMA_FLAG_MMC) || ((FLAG) == ETH_DMA_FLAG_DATATRANSFERERROR) || \
+ ((FLAG) == ETH_DMA_FLAG_READWRITEERROR) || ((FLAG) == ETH_DMA_FLAG_ACCESSERROR) || \
+ ((FLAG) == ETH_DMA_FLAG_NIS) || ((FLAG) == ETH_DMA_FLAG_AIS) || \
+ ((FLAG) == ETH_DMA_FLAG_ER) || ((FLAG) == ETH_DMA_FLAG_FBE) || \
+ ((FLAG) == ETH_DMA_FLAG_ET) || ((FLAG) == ETH_DMA_FLAG_RWT) || \
+ ((FLAG) == ETH_DMA_FLAG_RPS) || ((FLAG) == ETH_DMA_FLAG_RBU) || \
+ ((FLAG) == ETH_DMA_FLAG_R) || ((FLAG) == ETH_DMA_FLAG_TU) || \
+ ((FLAG) == ETH_DMA_FLAG_RO) || ((FLAG) == ETH_DMA_FLAG_TJT) || \
+ ((FLAG) == ETH_DMA_FLAG_TBU) || ((FLAG) == ETH_DMA_FLAG_TPS) || \
+ ((FLAG) == ETH_DMA_FLAG_T))
+#define IS_ETH_MAC_IT(IT) ((((IT) & (uint32_t)0xFFFFFDF1) == 0x00) && ((IT) != 0x00))
+#define IS_ETH_MAC_GET_IT(IT) (((IT) == ETH_MAC_IT_TST) || ((IT) == ETH_MAC_IT_MMCT) || \
+ ((IT) == ETH_MAC_IT_MMCR) || ((IT) == ETH_MAC_IT_MMC) || \
+ ((IT) == ETH_MAC_IT_PMT))
+#define IS_ETH_MAC_GET_FLAG(FLAG) (((FLAG) == ETH_MAC_FLAG_TST) || ((FLAG) == ETH_MAC_FLAG_MMCT) || \
+ ((FLAG) == ETH_MAC_FLAG_MMCR) || ((FLAG) == ETH_MAC_FLAG_MMC) || \
+ ((FLAG) == ETH_MAC_FLAG_PMT))
+#define IS_ETH_DMA_IT(IT) ((((IT) & (uint32_t)0xC7FE1800) == 0x00) && ((IT) != 0x00))
+#define IS_ETH_DMA_GET_IT(IT) (((IT) == ETH_DMA_IT_TST) || ((IT) == ETH_DMA_IT_PMT) || \
+ ((IT) == ETH_DMA_IT_MMC) || ((IT) == ETH_DMA_IT_NIS) || \
+ ((IT) == ETH_DMA_IT_AIS) || ((IT) == ETH_DMA_IT_ER) || \
+ ((IT) == ETH_DMA_IT_FBE) || ((IT) == ETH_DMA_IT_ET) || \
+ ((IT) == ETH_DMA_IT_RWT) || ((IT) == ETH_DMA_IT_RPS) || \
+ ((IT) == ETH_DMA_IT_RBU) || ((IT) == ETH_DMA_IT_R) || \
+ ((IT) == ETH_DMA_IT_TU) || ((IT) == ETH_DMA_IT_RO) || \
+ ((IT) == ETH_DMA_IT_TJT) || ((IT) == ETH_DMA_IT_TBU) || \
+ ((IT) == ETH_DMA_IT_TPS) || ((IT) == ETH_DMA_IT_T))
+#define IS_ETH_DMA_GET_OVERFLOW(OVERFLOW) (((OVERFLOW) == ETH_DMA_OVERFLOW_RXFIFOCOUNTER) || \
+ ((OVERFLOW) == ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER))
+#define IS_ETH_MMC_IT(IT) (((((IT) & (uint32_t)0xFFDF3FFF) == 0x00) || (((IT) & (uint32_t)0xEFFDFF9F) == 0x00)) && \
+ ((IT) != 0x00))
+#define IS_ETH_MMC_GET_IT(IT) (((IT) == ETH_MMC_IT_TGF) || ((IT) == ETH_MMC_IT_TGFMSC) || \
+ ((IT) == ETH_MMC_IT_TGFSC) || ((IT) == ETH_MMC_IT_RGUF) || \
+ ((IT) == ETH_MMC_IT_RFAE) || ((IT) == ETH_MMC_IT_RFCE))
+#define IS_ETH_ENHANCED_DESCRIPTOR_FORMAT(CMD) (((CMD) == ETH_DMAENHANCEDDESCRIPTOR_ENABLE) || \
+ ((CMD) == ETH_DMAENHANCEDDESCRIPTOR_DISABLE))
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup ETH_Private_Defines
+ * @{
+ */
+/* Delay to wait when writing to some Ethernet registers */
+#define ETH_REG_WRITE_DELAY ((uint32_t)0x00000001U)
+
+/* Ethernet Errors */
+#define ETH_SUCCESS ((uint32_t)0U)
+#define ETH_ERROR ((uint32_t)1U)
+
+/* Ethernet DMA Tx descriptors Collision Count Shift */
+#define ETH_DMATXDESC_COLLISION_COUNTSHIFT ((uint32_t)3U)
+
+/* Ethernet DMA Tx descriptors Buffer2 Size Shift */
+#define ETH_DMATXDESC_BUFFER2_SIZESHIFT ((uint32_t)16U)
+
+/* Ethernet DMA Rx descriptors Frame Length Shift */
+#define ETH_DMARXDESC_FRAME_LENGTHSHIFT ((uint32_t)16U)
+
+/* Ethernet DMA Rx descriptors Buffer2 Size Shift */
+#define ETH_DMARXDESC_BUFFER2_SIZESHIFT ((uint32_t)16U)
+
+/* Ethernet DMA Rx descriptors Frame length Shift */
+#define ETH_DMARXDESC_FRAMELENGTHSHIFT ((uint32_t)16)
+
+/* Ethernet MAC address offsets */
+#define ETH_MAC_ADDR_HBASE (uint32_t)(ETH_MAC_BASE + (uint32_t)0x40U) /* Ethernet MAC address high offset */
+#define ETH_MAC_ADDR_LBASE (uint32_t)(ETH_MAC_BASE + (uint32_t)0x44U) /* Ethernet MAC address low offset */
+
+/* Ethernet MACMIIAR register Mask */
+#define ETH_MACMIIAR_CR_MASK ((uint32_t)0xFFFFFFE3U)
+
+/* Ethernet MACCR register Mask */
+#define ETH_MACCR_CLEAR_MASK ((uint32_t)0xFF20810FU)
+
+/* Ethernet MACFCR register Mask */
+#define ETH_MACFCR_CLEAR_MASK ((uint32_t)0x0000FF41U)
+
+/* Ethernet DMAOMR register Mask */
+#define ETH_DMAOMR_CLEAR_MASK ((uint32_t)0xF8DE3F23U)
+
+/* Ethernet Remote Wake-up frame register length */
+#define ETH_WAKEUP_REGISTER_LENGTH 8U
+
+/* Ethernet Missed frames counter Shift */
+#define ETH_DMA_RX_OVERFLOW_MISSEDFRAMES_COUNTERSHIFT 17U
+ /**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ETH_Exported_Types ETH Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_ETH_STATE_RESET = 0x00U, /*!< Peripheral not yet Initialized or disabled */
+ HAL_ETH_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_ETH_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */
+ HAL_ETH_STATE_BUSY_TX = 0x12U, /*!< Data Transmission process is ongoing */
+ HAL_ETH_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
+ HAL_ETH_STATE_BUSY_TX_RX = 0x32U, /*!< Data Transmission and Reception process is ongoing */
+ HAL_ETH_STATE_BUSY_WR = 0x42U, /*!< Write process is ongoing */
+ HAL_ETH_STATE_BUSY_RD = 0x82U, /*!< Read process is ongoing */
+ HAL_ETH_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
+ HAL_ETH_STATE_ERROR = 0x04U /*!< Reception process is ongoing */
+}HAL_ETH_StateTypeDef;
+
+/**
+ * @brief ETH Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t AutoNegotiation; /*!< Selects or not the AutoNegotiation mode for the external PHY
+ The AutoNegotiation allows an automatic setting of the Speed (10/100Mbps)
+ and the mode (half/full-duplex).
+ This parameter can be a value of @ref ETH_AutoNegotiation */
+
+ uint32_t Speed; /*!< Sets the Ethernet speed: 10/100 Mbps.
+ This parameter can be a value of @ref ETH_Speed */
+
+ uint32_t DuplexMode; /*!< Selects the MAC duplex mode: Half-Duplex or Full-Duplex mode
+ This parameter can be a value of @ref ETH_Duplex_Mode */
+
+ uint16_t PhyAddress; /*!< Ethernet PHY address.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 32 */
+
+ uint8_t *MACAddr; /*!< MAC Address of used Hardware: must be pointer on an array of 6 bytes */
+
+ uint32_t RxMode; /*!< Selects the Ethernet Rx mode: Polling mode, Interrupt mode.
+ This parameter can be a value of @ref ETH_Rx_Mode */
+
+ uint32_t ChecksumMode; /*!< Selects if the checksum is check by hardware or by software.
+ This parameter can be a value of @ref ETH_Checksum_Mode */
+
+ uint32_t MediaInterface ; /*!< Selects the media-independent interface or the reduced media-independent interface.
+ This parameter can be a value of @ref ETH_Media_Interface */
+
+} ETH_InitTypeDef;
+
+
+ /**
+ * @brief ETH MAC Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t Watchdog; /*!< Selects or not the Watchdog timer
+ When enabled, the MAC allows no more then 2048 bytes to be received.
+ When disabled, the MAC can receive up to 16384 bytes.
+ This parameter can be a value of @ref ETH_Watchdog */
+
+ uint32_t Jabber; /*!< Selects or not Jabber timer
+ When enabled, the MAC allows no more then 2048 bytes to be sent.
+ When disabled, the MAC can send up to 16384 bytes.
+ This parameter can be a value of @ref ETH_Jabber */
+
+ uint32_t InterFrameGap; /*!< Selects the minimum IFG between frames during transmission.
+ This parameter can be a value of @ref ETH_Inter_Frame_Gap */
+
+ uint32_t CarrierSense; /*!< Selects or not the Carrier Sense.
+ This parameter can be a value of @ref ETH_Carrier_Sense */
+
+ uint32_t ReceiveOwn; /*!< Selects or not the ReceiveOwn,
+ ReceiveOwn allows the reception of frames when the TX_EN signal is asserted
+ in Half-Duplex mode.
+ This parameter can be a value of @ref ETH_Receive_Own */
+
+ uint32_t LoopbackMode; /*!< Selects or not the internal MAC MII Loopback mode.
+ This parameter can be a value of @ref ETH_Loop_Back_Mode */
+
+ uint32_t ChecksumOffload; /*!< Selects or not the IPv4 checksum checking for received frame payloads' TCP/UDP/ICMP headers.
+ This parameter can be a value of @ref ETH_Checksum_Offload */
+
+ uint32_t RetryTransmission; /*!< Selects or not the MAC attempt retries transmission, based on the settings of BL,
+ when a collision occurs (Half-Duplex mode).
+ This parameter can be a value of @ref ETH_Retry_Transmission */
+
+ uint32_t AutomaticPadCRCStrip; /*!< Selects or not the Automatic MAC Pad/CRC Stripping.
+ This parameter can be a value of @ref ETH_Automatic_Pad_CRC_Strip */
+
+ uint32_t BackOffLimit; /*!< Selects the BackOff limit value.
+ This parameter can be a value of @ref ETH_Back_Off_Limit */
+
+ uint32_t DeferralCheck; /*!< Selects or not the deferral check function (Half-Duplex mode).
+ This parameter can be a value of @ref ETH_Deferral_Check */
+
+ uint32_t ReceiveAll; /*!< Selects or not all frames reception by the MAC (No filtering).
+ This parameter can be a value of @ref ETH_Receive_All */
+
+ uint32_t SourceAddrFilter; /*!< Selects the Source Address Filter mode.
+ This parameter can be a value of @ref ETH_Source_Addr_Filter */
+
+ uint32_t PassControlFrames; /*!< Sets the forwarding mode of the control frames (including unicast and multicast PAUSE frames)
+ This parameter can be a value of @ref ETH_Pass_Control_Frames */
+
+ uint32_t BroadcastFramesReception; /*!< Selects or not the reception of Broadcast Frames.
+ This parameter can be a value of @ref ETH_Broadcast_Frames_Reception */
+
+ uint32_t DestinationAddrFilter; /*!< Sets the destination filter mode for both unicast and multicast frames.
+ This parameter can be a value of @ref ETH_Destination_Addr_Filter */
+
+ uint32_t PromiscuousMode; /*!< Selects or not the Promiscuous Mode
+ This parameter can be a value of @ref ETH_Promiscuous_Mode */
+
+ uint32_t MulticastFramesFilter; /*!< Selects the Multicast Frames filter mode: None/HashTableFilter/PerfectFilter/PerfectHashTableFilter.
+ This parameter can be a value of @ref ETH_Multicast_Frames_Filter */
+
+ uint32_t UnicastFramesFilter; /*!< Selects the Unicast Frames filter mode: HashTableFilter/PerfectFilter/PerfectHashTableFilter.
+ This parameter can be a value of @ref ETH_Unicast_Frames_Filter */
+
+ uint32_t HashTableHigh; /*!< This field holds the higher 32 bits of Hash table.
+ This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFF */
+
+ uint32_t HashTableLow; /*!< This field holds the lower 32 bits of Hash table.
+ This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFF */
+
+ uint32_t PauseTime; /*!< This field holds the value to be used in the Pause Time field in the transmit control frame.
+ This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFF */
+
+ uint32_t ZeroQuantaPause; /*!< Selects or not the automatic generation of Zero-Quanta Pause Control frames.
+ This parameter can be a value of @ref ETH_Zero_Quanta_Pause */
+
+ uint32_t PauseLowThreshold; /*!< This field configures the threshold of the PAUSE to be checked for
+ automatic retransmission of PAUSE Frame.
+ This parameter can be a value of @ref ETH_Pause_Low_Threshold */
+
+ uint32_t UnicastPauseFrameDetect; /*!< Selects or not the MAC detection of the Pause frames (with MAC Address0
+ unicast address and unique multicast address).
+ This parameter can be a value of @ref ETH_Unicast_Pause_Frame_Detect */
+
+ uint32_t ReceiveFlowControl; /*!< Enables or disables the MAC to decode the received Pause frame and
+ disable its transmitter for a specified time (Pause Time)
+ This parameter can be a value of @ref ETH_Receive_Flow_Control */
+
+ uint32_t TransmitFlowControl; /*!< Enables or disables the MAC to transmit Pause frames (Full-Duplex mode)
+ or the MAC back-pressure operation (Half-Duplex mode)
+ This parameter can be a value of @ref ETH_Transmit_Flow_Control */
+
+ uint32_t VLANTagComparison; /*!< Selects the 12-bit VLAN identifier or the complete 16-bit VLAN tag for
+ comparison and filtering.
+ This parameter can be a value of @ref ETH_VLAN_Tag_Comparison */
+
+ uint32_t VLANTagIdentifier; /*!< Holds the VLAN tag identifier for receive frames */
+
+} ETH_MACInitTypeDef;
+
+
+/**
+ * @brief ETH DMA Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t DropTCPIPChecksumErrorFrame; /*!< Selects or not the Dropping of TCP/IP Checksum Error Frames.
+ This parameter can be a value of @ref ETH_Drop_TCP_IP_Checksum_Error_Frame */
+
+ uint32_t ReceiveStoreForward; /*!< Enables or disables the Receive store and forward mode.
+ This parameter can be a value of @ref ETH_Receive_Store_Forward */
+
+ uint32_t FlushReceivedFrame; /*!< Enables or disables the flushing of received frames.
+ This parameter can be a value of @ref ETH_Flush_Received_Frame */
+
+ uint32_t TransmitStoreForward; /*!< Enables or disables Transmit store and forward mode.
+ This parameter can be a value of @ref ETH_Transmit_Store_Forward */
+
+ uint32_t TransmitThresholdControl; /*!< Selects or not the Transmit Threshold Control.
+ This parameter can be a value of @ref ETH_Transmit_Threshold_Control */
+
+ uint32_t ForwardErrorFrames; /*!< Selects or not the forward to the DMA of erroneous frames.
+ This parameter can be a value of @ref ETH_Forward_Error_Frames */
+
+ uint32_t ForwardUndersizedGoodFrames; /*!< Enables or disables the Rx FIFO to forward Undersized frames (frames with no Error
+ and length less than 64 bytes) including pad-bytes and CRC)
+ This parameter can be a value of @ref ETH_Forward_Undersized_Good_Frames */
+
+ uint32_t ReceiveThresholdControl; /*!< Selects the threshold level of the Receive FIFO.
+ This parameter can be a value of @ref ETH_Receive_Threshold_Control */
+
+ uint32_t SecondFrameOperate; /*!< Selects or not the Operate on second frame mode, which allows the DMA to process a second
+ frame of Transmit data even before obtaining the status for the first frame.
+ This parameter can be a value of @ref ETH_Second_Frame_Operate */
+
+ uint32_t AddressAlignedBeats; /*!< Enables or disables the Address Aligned Beats.
+ This parameter can be a value of @ref ETH_Address_Aligned_Beats */
+
+ uint32_t FixedBurst; /*!< Enables or disables the AHB Master interface fixed burst transfers.
+ This parameter can be a value of @ref ETH_Fixed_Burst */
+
+ uint32_t RxDMABurstLength; /*!< Indicates the maximum number of beats to be transferred in one Rx DMA transaction.
+ This parameter can be a value of @ref ETH_Rx_DMA_Burst_Length */
+
+ uint32_t TxDMABurstLength; /*!< Indicates the maximum number of beats to be transferred in one Tx DMA transaction.
+ This parameter can be a value of @ref ETH_Tx_DMA_Burst_Length */
+
+ uint32_t EnhancedDescriptorFormat; /*!< Enables the enhanced descriptor format.
+ This parameter can be a value of @ref ETH_DMA_Enhanced_descriptor_format */
+
+ uint32_t DescriptorSkipLength; /*!< Specifies the number of word to skip between two unchained descriptors (Ring mode)
+ This parameter must be a number between Min_Data = 0 and Max_Data = 32 */
+
+ uint32_t DMAArbitration; /*!< Selects the DMA Tx/Rx arbitration.
+ This parameter can be a value of @ref ETH_DMA_Arbitration */
+} ETH_DMAInitTypeDef;
+
+
+/**
+ * @brief ETH DMA Descriptors data structure definition
+ */
+
+typedef struct
+{
+ __IO uint32_t Status; /*!< Status */
+
+ uint32_t ControlBufferSize; /*!< Control and Buffer1, Buffer2 lengths */
+
+ uint32_t Buffer1Addr; /*!< Buffer1 address pointer */
+
+ uint32_t Buffer2NextDescAddr; /*!< Buffer2 or next descriptor address pointer */
+
+ /*!< Enhanced Ethernet DMA PTP Descriptors */
+ uint32_t ExtendedStatus; /*!< Extended status for PTP receive descriptor */
+
+ uint32_t Reserved1; /*!< Reserved */
+
+ uint32_t TimeStampLow; /*!< Time Stamp Low value for transmit and receive */
+
+ uint32_t TimeStampHigh; /*!< Time Stamp High value for transmit and receive */
+
+} ETH_DMADescTypeDef;
+
+
+/**
+ * @brief Received Frame Informations structure definition
+ */
+typedef struct
+{
+ ETH_DMADescTypeDef *FSRxDesc; /*!< First Segment Rx Desc */
+
+ ETH_DMADescTypeDef *LSRxDesc; /*!< Last Segment Rx Desc */
+
+ uint32_t SegCount; /*!< Segment count */
+
+ uint32_t length; /*!< Frame length */
+
+ uint32_t buffer; /*!< Frame buffer */
+
+} ETH_DMARxFrameInfos;
+
+
+/**
+ * @brief ETH Handle Structure definition
+ */
+
+typedef struct
+{
+ ETH_TypeDef *Instance; /*!< Register base address */
+
+ ETH_InitTypeDef Init; /*!< Ethernet Init Configuration */
+
+ uint32_t LinkStatus; /*!< Ethernet link status */
+
+ ETH_DMADescTypeDef *RxDesc; /*!< Rx descriptor to Get */
+
+ ETH_DMADescTypeDef *TxDesc; /*!< Tx descriptor to Set */
+
+ ETH_DMARxFrameInfos RxFrameInfos; /*!< last Rx frame infos */
+
+ __IO HAL_ETH_StateTypeDef State; /*!< ETH communication state */
+
+ HAL_LockTypeDef Lock; /*!< ETH Lock */
+
+} ETH_HandleTypeDef;
+
+ /**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ETH_Exported_Constants ETH Exported Constants
+ * @{
+ */
+
+/** @defgroup ETH_Buffers_setting ETH Buffers setting
+ * @{
+ */
+#define ETH_MAX_PACKET_SIZE ((uint32_t)1524U) /*!< ETH_HEADER + ETH_EXTRA + ETH_VLAN_TAG + ETH_MAX_ETH_PAYLOAD + ETH_CRC */
+#define ETH_HEADER ((uint32_t)14U) /*!< 6 byte Dest addr, 6 byte Src addr, 2 byte length/type */
+#define ETH_CRC ((uint32_t)4U) /*!< Ethernet CRC */
+#define ETH_EXTRA ((uint32_t)2U) /*!< Extra bytes in some cases */
+#define ETH_VLAN_TAG ((uint32_t)4U) /*!< optional 802.1q VLAN Tag */
+#define ETH_MIN_ETH_PAYLOAD ((uint32_t)46U) /*!< Minimum Ethernet payload size */
+#define ETH_MAX_ETH_PAYLOAD ((uint32_t)1500U) /*!< Maximum Ethernet payload size */
+#define ETH_JUMBO_FRAME_PAYLOAD ((uint32_t)9000U) /*!< Jumbo frame payload size */
+
+ /* Ethernet driver receive buffers are organized in a chained linked-list, when
+ an Ethernet packet is received, the Rx-DMA will transfer the packet from RxFIFO
+ to the driver receive buffers memory.
+
+ Depending on the size of the received Ethernet packet and the size of
+ each Ethernet driver receive buffer, the received packet can take one or more
+ Ethernet driver receive buffer.
+
+ In below are defined the size of one Ethernet driver receive buffer ETH_RX_BUF_SIZE
+ and the total count of the driver receive buffers ETH_RXBUFNB.
+
+ The configured value for ETH_RX_BUF_SIZE and ETH_RXBUFNB are only provided as
+ example, they can be reconfigured in the application layer to fit the application
+ needs */
+
+/* Here we configure each Ethernet driver receive buffer to fit the Max size Ethernet
+ packet */
+#ifndef ETH_RX_BUF_SIZE
+ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE
+#endif
+
+/* 5 Ethernet driver receive buffers are used (in a chained linked list)*/
+#ifndef ETH_RXBUFNB
+ #define ETH_RXBUFNB ((uint32_t)5U) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */
+#endif
+
+
+ /* Ethernet driver transmit buffers are organized in a chained linked-list, when
+ an Ethernet packet is transmitted, Tx-DMA will transfer the packet from the
+ driver transmit buffers memory to the TxFIFO.
+
+ Depending on the size of the Ethernet packet to be transmitted and the size of
+ each Ethernet driver transmit buffer, the packet to be transmitted can take
+ one or more Ethernet driver transmit buffer.
+
+ In below are defined the size of one Ethernet driver transmit buffer ETH_TX_BUF_SIZE
+ and the total count of the driver transmit buffers ETH_TXBUFNB.
+
+ The configured value for ETH_TX_BUF_SIZE and ETH_TXBUFNB are only provided as
+ example, they can be reconfigured in the application layer to fit the application
+ needs */
+
+/* Here we configure each Ethernet driver transmit buffer to fit the Max size Ethernet
+ packet */
+#ifndef ETH_TX_BUF_SIZE
+ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE
+#endif
+
+/* 5 Ethernet driver transmit buffers are used (in a chained linked list)*/
+#ifndef ETH_TXBUFNB
+ #define ETH_TXBUFNB ((uint32_t)5U) /* 5 Tx buffers of size ETH_TX_BUF_SIZE */
+#endif
+
+ /**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_TX_Descriptor ETH DMA TX Descriptor
+ * @{
+ */
+
+/*
+ DMA Tx Descriptor
+ -----------------------------------------------------------------------------------------------
+ TDES0 | OWN(31) | CTRL[30:26] | Reserved[25:24] | CTRL[23:20] | Reserved[19:17] | Status[16:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES1 | Reserved[31:29] | Buffer2 ByteCount[28:16] | Reserved[15:13] | Buffer1 ByteCount[12:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES2 | Buffer1 Address [31:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES3 | Buffer2 Address [31:0] / Next Descriptor Address [31:0] |
+ -----------------------------------------------------------------------------------------------
+*/
+
+/**
+ * @brief Bit definition of TDES0 register: DMA Tx descriptor status register
+ */
+#define ETH_DMATXDESC_OWN ((uint32_t)0x80000000U) /*!< OWN bit: descriptor is owned by DMA engine */
+#define ETH_DMATXDESC_IC ((uint32_t)0x40000000U) /*!< Interrupt on Completion */
+#define ETH_DMATXDESC_LS ((uint32_t)0x20000000U) /*!< Last Segment */
+#define ETH_DMATXDESC_FS ((uint32_t)0x10000000U) /*!< First Segment */
+#define ETH_DMATXDESC_DC ((uint32_t)0x08000000U) /*!< Disable CRC */
+#define ETH_DMATXDESC_DP ((uint32_t)0x04000000U) /*!< Disable Padding */
+#define ETH_DMATXDESC_TTSE ((uint32_t)0x02000000U) /*!< Transmit Time Stamp Enable */
+#define ETH_DMATXDESC_CIC ((uint32_t)0x00C00000U) /*!< Checksum Insertion Control: 4 cases */
+#define ETH_DMATXDESC_CIC_BYPASS ((uint32_t)0x00000000U) /*!< Do Nothing: Checksum Engine is bypassed */
+#define ETH_DMATXDESC_CIC_IPV4HEADER ((uint32_t)0x00400000U) /*!< IPV4 header Checksum Insertion */
+#define ETH_DMATXDESC_CIC_TCPUDPICMP_SEGMENT ((uint32_t)0x00800000U) /*!< TCP/UDP/ICMP Checksum Insertion calculated over segment only */
+#define ETH_DMATXDESC_CIC_TCPUDPICMP_FULL ((uint32_t)0x00C00000U) /*!< TCP/UDP/ICMP Checksum Insertion fully calculated */
+#define ETH_DMATXDESC_TER ((uint32_t)0x00200000U) /*!< Transmit End of Ring */
+#define ETH_DMATXDESC_TCH ((uint32_t)0x00100000U) /*!< Second Address Chained */
+#define ETH_DMATXDESC_TTSS ((uint32_t)0x00020000U) /*!< Tx Time Stamp Status */
+#define ETH_DMATXDESC_IHE ((uint32_t)0x00010000U) /*!< IP Header Error */
+#define ETH_DMATXDESC_ES ((uint32_t)0x00008000U) /*!< Error summary: OR of the following bits: UE || ED || EC || LCO || NC || LCA || FF || JT */
+#define ETH_DMATXDESC_JT ((uint32_t)0x00004000U) /*!< Jabber Timeout */
+#define ETH_DMATXDESC_FF ((uint32_t)0x00002000U) /*!< Frame Flushed: DMA/MTL flushed the frame due to SW flush */
+#define ETH_DMATXDESC_PCE ((uint32_t)0x00001000U) /*!< Payload Checksum Error */
+#define ETH_DMATXDESC_LCA ((uint32_t)0x00000800U) /*!< Loss of Carrier: carrier lost during transmission */
+#define ETH_DMATXDESC_NC ((uint32_t)0x00000400U) /*!< No Carrier: no carrier signal from the transceiver */
+#define ETH_DMATXDESC_LCO ((uint32_t)0x00000200U) /*!< Late Collision: transmission aborted due to collision */
+#define ETH_DMATXDESC_EC ((uint32_t)0x00000100U) /*!< Excessive Collision: transmission aborted after 16 collisions */
+#define ETH_DMATXDESC_VF ((uint32_t)0x00000080U) /*!< VLAN Frame */
+#define ETH_DMATXDESC_CC ((uint32_t)0x00000078U) /*!< Collision Count */
+#define ETH_DMATXDESC_ED ((uint32_t)0x00000004U) /*!< Excessive Deferral */
+#define ETH_DMATXDESC_UF ((uint32_t)0x00000002U) /*!< Underflow Error: late data arrival from the memory */
+#define ETH_DMATXDESC_DB ((uint32_t)0x00000001U) /*!< Deferred Bit */
+
+/**
+ * @brief Bit definition of TDES1 register
+ */
+#define ETH_DMATXDESC_TBS2 ((uint32_t)0x1FFF0000U) /*!< Transmit Buffer2 Size */
+#define ETH_DMATXDESC_TBS1 ((uint32_t)0x00001FFFU) /*!< Transmit Buffer1 Size */
+
+/**
+ * @brief Bit definition of TDES2 register
+ */
+#define ETH_DMATXDESC_B1AP ((uint32_t)0xFFFFFFFFU) /*!< Buffer1 Address Pointer */
+
+/**
+ * @brief Bit definition of TDES3 register
+ */
+#define ETH_DMATXDESC_B2AP ((uint32_t)0xFFFFFFFFU) /*!< Buffer2 Address Pointer */
+
+ /*---------------------------------------------------------------------------------------------
+ TDES6 | Transmit Time Stamp Low [31:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES7 | Transmit Time Stamp High [31:0] |
+ ----------------------------------------------------------------------------------------------*/
+
+/* Bit definition of TDES6 register */
+ #define ETH_DMAPTPTXDESC_TTSL ((uint32_t)0xFFFFFFFFU) /* Transmit Time Stamp Low */
+
+/* Bit definition of TDES7 register */
+ #define ETH_DMAPTPTXDESC_TTSH ((uint32_t)0xFFFFFFFFU) /* Transmit Time Stamp High */
+
+/**
+ * @}
+ */
+/** @defgroup ETH_DMA_RX_Descriptor ETH DMA RX Descriptor
+ * @{
+ */
+
+/*
+ DMA Rx Descriptor
+ --------------------------------------------------------------------------------------------------------------------
+ RDES0 | OWN(31) | Status [30:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES1 | CTRL(31) | Reserved[30:29] | Buffer2 ByteCount[28:16] | CTRL[15:14] | Reserved(13) | Buffer1 ByteCount[12:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES2 | Buffer1 Address [31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES3 | Buffer2 Address [31:0] / Next Descriptor Address [31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+*/
+
+/**
+ * @brief Bit definition of RDES0 register: DMA Rx descriptor status register
+ */
+#define ETH_DMARXDESC_OWN ((uint32_t)0x80000000U) /*!< OWN bit: descriptor is owned by DMA engine */
+#define ETH_DMARXDESC_AFM ((uint32_t)0x40000000U) /*!< DA Filter Fail for the rx frame */
+#define ETH_DMARXDESC_FL ((uint32_t)0x3FFF0000U) /*!< Receive descriptor frame length */
+#define ETH_DMARXDESC_ES ((uint32_t)0x00008000U) /*!< Error summary: OR of the following bits: DE || OE || IPC || LC || RWT || RE || CE */
+#define ETH_DMARXDESC_DE ((uint32_t)0x00004000U) /*!< Descriptor error: no more descriptors for receive frame */
+#define ETH_DMARXDESC_SAF ((uint32_t)0x00002000U) /*!< SA Filter Fail for the received frame */
+#define ETH_DMARXDESC_LE ((uint32_t)0x00001000U) /*!< Frame size not matching with length field */
+#define ETH_DMARXDESC_OE ((uint32_t)0x00000800U) /*!< Overflow Error: Frame was damaged due to buffer overflow */
+#define ETH_DMARXDESC_VLAN ((uint32_t)0x00000400U) /*!< VLAN Tag: received frame is a VLAN frame */
+#define ETH_DMARXDESC_FS ((uint32_t)0x00000200U) /*!< First descriptor of the frame */
+#define ETH_DMARXDESC_LS ((uint32_t)0x00000100U) /*!< Last descriptor of the frame */
+#define ETH_DMARXDESC_IPV4HCE ((uint32_t)0x00000080U) /*!< IPC Checksum Error: Rx Ipv4 header checksum error */
+#define ETH_DMARXDESC_LC ((uint32_t)0x00000040U) /*!< Late collision occurred during reception */
+#define ETH_DMARXDESC_FT ((uint32_t)0x00000020U) /*!< Frame type - Ethernet, otherwise 802.3 */
+#define ETH_DMARXDESC_RWT ((uint32_t)0x00000010U) /*!< Receive Watchdog Timeout: watchdog timer expired during reception */
+#define ETH_DMARXDESC_RE ((uint32_t)0x00000008U) /*!< Receive error: error reported by MII interface */
+#define ETH_DMARXDESC_DBE ((uint32_t)0x00000004U) /*!< Dribble bit error: frame contains non int multiple of 8 bits */
+#define ETH_DMARXDESC_CE ((uint32_t)0x00000002U) /*!< CRC error */
+#define ETH_DMARXDESC_MAMPCE ((uint32_t)0x00000001U) /*!< Rx MAC Address/Payload Checksum Error: Rx MAC address matched/ Rx Payload Checksum Error */
+
+/**
+ * @brief Bit definition of RDES1 register
+ */
+#define ETH_DMARXDESC_DIC ((uint32_t)0x80000000U) /*!< Disable Interrupt on Completion */
+#define ETH_DMARXDESC_RBS2 ((uint32_t)0x1FFF0000U) /*!< Receive Buffer2 Size */
+#define ETH_DMARXDESC_RER ((uint32_t)0x00008000U) /*!< Receive End of Ring */
+#define ETH_DMARXDESC_RCH ((uint32_t)0x00004000U) /*!< Second Address Chained */
+#define ETH_DMARXDESC_RBS1 ((uint32_t)0x00001FFFU) /*!< Receive Buffer1 Size */
+
+/**
+ * @brief Bit definition of RDES2 register
+ */
+#define ETH_DMARXDESC_B1AP ((uint32_t)0xFFFFFFFFU) /*!< Buffer1 Address Pointer */
+
+/**
+ * @brief Bit definition of RDES3 register
+ */
+#define ETH_DMARXDESC_B2AP ((uint32_t)0xFFFFFFFFU) /*!< Buffer2 Address Pointer */
+
+/*---------------------------------------------------------------------------------------------------------------------
+ RDES4 | Reserved[31:15] | Extended Status [14:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES5 | Reserved[31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES6 | Receive Time Stamp Low [31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES7 | Receive Time Stamp High [31:0] |
+ --------------------------------------------------------------------------------------------------------------------*/
+
+/* Bit definition of RDES4 register */
+#define ETH_DMAPTPRXDESC_PTPV ((uint32_t)0x00002000U) /* PTP Version */
+#define ETH_DMAPTPRXDESC_PTPFT ((uint32_t)0x00001000U) /* PTP Frame Type */
+#define ETH_DMAPTPRXDESC_PTPMT ((uint32_t)0x00000F00U) /* PTP Message Type */
+#define ETH_DMAPTPRXDESC_PTPMT_SYNC ((uint32_t)0x00000100U) /* SYNC message (all clock types) */
+#define ETH_DMAPTPRXDESC_PTPMT_FOLLOWUP ((uint32_t)0x00000200U) /* FollowUp message (all clock types) */
+#define ETH_DMAPTPRXDESC_PTPMT_DELAYREQ ((uint32_t)0x00000300U) /* DelayReq message (all clock types) */
+#define ETH_DMAPTPRXDESC_PTPMT_DELAYRESP ((uint32_t)0x00000400U) /* DelayResp message (all clock types) */
+#define ETH_DMAPTPRXDESC_PTPMT_PDELAYREQ_ANNOUNCE ((uint32_t)0x00000500U) /* PdelayReq message (peer-to-peer transparent clock) or Announce message (Ordinary or Boundary clock) */
+#define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESP_MANAG ((uint32_t)0x00000600U) /* PdelayResp message (peer-to-peer transparent clock) or Management message (Ordinary or Boundary clock) */
+#define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESPFOLLOWUP_SIGNAL ((uint32_t)0x00000700U) /* PdelayRespFollowUp message (peer-to-peer transparent clock) or Signaling message (Ordinary or Boundary clock) */
+#define ETH_DMAPTPRXDESC_IPV6PR ((uint32_t)0x00000080U) /* IPv6 Packet Received */
+#define ETH_DMAPTPRXDESC_IPV4PR ((uint32_t)0x00000040U) /* IPv4 Packet Received */
+#define ETH_DMAPTPRXDESC_IPCB ((uint32_t)0x00000020U) /* IP Checksum Bypassed */
+#define ETH_DMAPTPRXDESC_IPPE ((uint32_t)0x00000010U) /* IP Payload Error */
+#define ETH_DMAPTPRXDESC_IPHE ((uint32_t)0x00000008U) /* IP Header Error */
+#define ETH_DMAPTPRXDESC_IPPT ((uint32_t)0x00000007U) /* IP Payload Type */
+#define ETH_DMAPTPRXDESC_IPPT_UDP ((uint32_t)0x00000001U) /* UDP payload encapsulated in the IP datagram */
+#define ETH_DMAPTPRXDESC_IPPT_TCP ((uint32_t)0x00000002U) /* TCP payload encapsulated in the IP datagram */
+#define ETH_DMAPTPRXDESC_IPPT_ICMP ((uint32_t)0x00000003U) /* ICMP payload encapsulated in the IP datagram */
+
+/* Bit definition of RDES6 register */
+#define ETH_DMAPTPRXDESC_RTSL ((uint32_t)0xFFFFFFFFU) /* Receive Time Stamp Low */
+
+/* Bit definition of RDES7 register */
+#define ETH_DMAPTPRXDESC_RTSH ((uint32_t)0xFFFFFFFFU) /* Receive Time Stamp High */
+/**
+ * @}
+ */
+ /** @defgroup ETH_AutoNegotiation ETH AutoNegotiation
+ * @{
+ */
+#define ETH_AUTONEGOTIATION_ENABLE ((uint32_t)0x00000001U)
+#define ETH_AUTONEGOTIATION_DISABLE ((uint32_t)0x00000000U)
+
+/**
+ * @}
+ */
+/** @defgroup ETH_Speed ETH Speed
+ * @{
+ */
+#define ETH_SPEED_10M ((uint32_t)0x00000000U)
+#define ETH_SPEED_100M ((uint32_t)0x00004000U)
+
+/**
+ * @}
+ */
+/** @defgroup ETH_Duplex_Mode ETH Duplex Mode
+ * @{
+ */
+#define ETH_MODE_FULLDUPLEX ((uint32_t)0x00000800U)
+#define ETH_MODE_HALFDUPLEX ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+/** @defgroup ETH_Rx_Mode ETH Rx Mode
+ * @{
+ */
+#define ETH_RXPOLLING_MODE ((uint32_t)0x00000000U)
+#define ETH_RXINTERRUPT_MODE ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Checksum_Mode ETH Checksum Mode
+ * @{
+ */
+#define ETH_CHECKSUM_BY_HARDWARE ((uint32_t)0x00000000U)
+#define ETH_CHECKSUM_BY_SOFTWARE ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Media_Interface ETH Media Interface
+ * @{
+ */
+#define ETH_MEDIA_INTERFACE_MII ((uint32_t)0x00000000U)
+#define ETH_MEDIA_INTERFACE_RMII ((uint32_t)SYSCFG_PMC_MII_RMII_SEL)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Watchdog ETH Watchdog
+ * @{
+ */
+#define ETH_WATCHDOG_ENABLE ((uint32_t)0x00000000U)
+#define ETH_WATCHDOG_DISABLE ((uint32_t)0x00800000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Jabber ETH Jabber
+ * @{
+ */
+#define ETH_JABBER_ENABLE ((uint32_t)0x00000000U)
+#define ETH_JABBER_DISABLE ((uint32_t)0x00400000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Inter_Frame_Gap ETH Inter Frame Gap
+ * @{
+ */
+#define ETH_INTERFRAMEGAP_96BIT ((uint32_t)0x00000000U) /*!< minimum IFG between frames during transmission is 96Bit */
+#define ETH_INTERFRAMEGAP_88BIT ((uint32_t)0x00020000U) /*!< minimum IFG between frames during transmission is 88Bit */
+#define ETH_INTERFRAMEGAP_80BIT ((uint32_t)0x00040000U) /*!< minimum IFG between frames during transmission is 80Bit */
+#define ETH_INTERFRAMEGAP_72BIT ((uint32_t)0x00060000U) /*!< minimum IFG between frames during transmission is 72Bit */
+#define ETH_INTERFRAMEGAP_64BIT ((uint32_t)0x00080000U) /*!< minimum IFG between frames during transmission is 64Bit */
+#define ETH_INTERFRAMEGAP_56BIT ((uint32_t)0x000A0000U) /*!< minimum IFG between frames during transmission is 56Bit */
+#define ETH_INTERFRAMEGAP_48BIT ((uint32_t)0x000C0000U) /*!< minimum IFG between frames during transmission is 48Bit */
+#define ETH_INTERFRAMEGAP_40BIT ((uint32_t)0x000E0000U) /*!< minimum IFG between frames during transmission is 40Bit */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Carrier_Sense ETH Carrier Sense
+ * @{
+ */
+#define ETH_CARRIERSENCE_ENABLE ((uint32_t)0x00000000U)
+#define ETH_CARRIERSENCE_DISABLE ((uint32_t)0x00010000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Own ETH Receive Own
+ * @{
+ */
+#define ETH_RECEIVEOWN_ENABLE ((uint32_t)0x00000000U)
+#define ETH_RECEIVEOWN_DISABLE ((uint32_t)0x00002000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Loop_Back_Mode ETH Loop Back Mode
+ * @{
+ */
+#define ETH_LOOPBACKMODE_ENABLE ((uint32_t)0x00001000U)
+#define ETH_LOOPBACKMODE_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Checksum_Offload ETH Checksum Offload
+ * @{
+ */
+#define ETH_CHECKSUMOFFLAOD_ENABLE ((uint32_t)0x00000400U)
+#define ETH_CHECKSUMOFFLAOD_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Retry_Transmission ETH Retry Transmission
+ * @{
+ */
+#define ETH_RETRYTRANSMISSION_ENABLE ((uint32_t)0x00000000U)
+#define ETH_RETRYTRANSMISSION_DISABLE ((uint32_t)0x00000200U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Automatic_Pad_CRC_Strip ETH Automatic Pad CRC Strip
+ * @{
+ */
+#define ETH_AUTOMATICPADCRCSTRIP_ENABLE ((uint32_t)0x00000080U)
+#define ETH_AUTOMATICPADCRCSTRIP_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Back_Off_Limit ETH Back Off Limit
+ * @{
+ */
+#define ETH_BACKOFFLIMIT_10 ((uint32_t)0x00000000U)
+#define ETH_BACKOFFLIMIT_8 ((uint32_t)0x00000020U)
+#define ETH_BACKOFFLIMIT_4 ((uint32_t)0x00000040U)
+#define ETH_BACKOFFLIMIT_1 ((uint32_t)0x00000060U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Deferral_Check ETH Deferral Check
+ * @{
+ */
+#define ETH_DEFFERRALCHECK_ENABLE ((uint32_t)0x00000010U)
+#define ETH_DEFFERRALCHECK_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_All ETH Receive All
+ * @{
+ */
+#define ETH_RECEIVEALL_ENABLE ((uint32_t)0x80000000U)
+#define ETH_RECEIVEAll_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Source_Addr_Filter ETH Source Addr Filter
+ * @{
+ */
+#define ETH_SOURCEADDRFILTER_NORMAL_ENABLE ((uint32_t)0x00000200U)
+#define ETH_SOURCEADDRFILTER_INVERSE_ENABLE ((uint32_t)0x00000300U)
+#define ETH_SOURCEADDRFILTER_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Pass_Control_Frames ETH Pass Control Frames
+ * @{
+ */
+#define ETH_PASSCONTROLFRAMES_BLOCKALL ((uint32_t)0x00000040U) /*!< MAC filters all control frames from reaching the application */
+#define ETH_PASSCONTROLFRAMES_FORWARDALL ((uint32_t)0x00000080U) /*!< MAC forwards all control frames to application even if they fail the Address Filter */
+#define ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER ((uint32_t)0x000000C0U) /*!< MAC forwards control frames that pass the Address Filter. */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Broadcast_Frames_Reception ETH Broadcast Frames Reception
+ * @{
+ */
+#define ETH_BROADCASTFRAMESRECEPTION_ENABLE ((uint32_t)0x00000000U)
+#define ETH_BROADCASTFRAMESRECEPTION_DISABLE ((uint32_t)0x00000020U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Destination_Addr_Filter ETH Destination Addr Filter
+ * @{
+ */
+#define ETH_DESTINATIONADDRFILTER_NORMAL ((uint32_t)0x00000000U)
+#define ETH_DESTINATIONADDRFILTER_INVERSE ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Promiscuous_Mode ETH Promiscuous Mode
+ * @{
+ */
+#define ETH_PROMISCUOUS_MODE_ENABLE ((uint32_t)0x00000001U)
+#define ETH_PROMISCUOUS_MODE_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Multicast_Frames_Filter ETH Multicast Frames Filter
+ * @{
+ */
+#define ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE ((uint32_t)0x00000404U)
+#define ETH_MULTICASTFRAMESFILTER_HASHTABLE ((uint32_t)0x00000004U)
+#define ETH_MULTICASTFRAMESFILTER_PERFECT ((uint32_t)0x00000000U)
+#define ETH_MULTICASTFRAMESFILTER_NONE ((uint32_t)0x00000010U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Unicast_Frames_Filter ETH Unicast Frames Filter
+ * @{
+ */
+#define ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE ((uint32_t)0x00000402U)
+#define ETH_UNICASTFRAMESFILTER_HASHTABLE ((uint32_t)0x00000002U)
+#define ETH_UNICASTFRAMESFILTER_PERFECT ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Zero_Quanta_Pause ETH Zero Quanta Pause
+ * @{
+ */
+#define ETH_ZEROQUANTAPAUSE_ENABLE ((uint32_t)0x00000000U)
+#define ETH_ZEROQUANTAPAUSE_DISABLE ((uint32_t)0x00000080U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Pause_Low_Threshold ETH Pause Low Threshold
+ * @{
+ */
+#define ETH_PAUSELOWTHRESHOLD_MINUS4 ((uint32_t)0x00000000U) /*!< Pause time minus 4 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS28 ((uint32_t)0x00000010U) /*!< Pause time minus 28 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS144 ((uint32_t)0x00000020U) /*!< Pause time minus 144 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS256 ((uint32_t)0x00000030U) /*!< Pause time minus 256 slot times */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Unicast_Pause_Frame_Detect ETH Unicast Pause Frame Detect
+ * @{
+ */
+#define ETH_UNICASTPAUSEFRAMEDETECT_ENABLE ((uint32_t)0x00000008U)
+#define ETH_UNICASTPAUSEFRAMEDETECT_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Flow_Control ETH Receive Flow Control
+ * @{
+ */
+#define ETH_RECEIVEFLOWCONTROL_ENABLE ((uint32_t)0x00000004U)
+#define ETH_RECEIVEFLOWCONTROL_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Transmit_Flow_Control ETH Transmit Flow Control
+ * @{
+ */
+#define ETH_TRANSMITFLOWCONTROL_ENABLE ((uint32_t)0x00000002U)
+#define ETH_TRANSMITFLOWCONTROL_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_VLAN_Tag_Comparison ETH VLAN Tag Comparison
+ * @{
+ */
+#define ETH_VLANTAGCOMPARISON_12BIT ((uint32_t)0x00010000U)
+#define ETH_VLANTAGCOMPARISON_16BIT ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_addresses ETH MAC addresses
+ * @{
+ */
+#define ETH_MAC_ADDRESS0 ((uint32_t)0x00000000U)
+#define ETH_MAC_ADDRESS1 ((uint32_t)0x00000008U)
+#define ETH_MAC_ADDRESS2 ((uint32_t)0x00000010U)
+#define ETH_MAC_ADDRESS3 ((uint32_t)0x00000018U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_addresses_filter_SA_DA ETH MAC addresses filter SA DA
+ * @{
+ */
+#define ETH_MAC_ADDRESSFILTER_SA ((uint32_t)0x00000000U)
+#define ETH_MAC_ADDRESSFILTER_DA ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_addresses_filter_Mask_bytes ETH MAC addresses filter Mask bytes
+ * @{
+ */
+#define ETH_MAC_ADDRESSMASK_BYTE6 ((uint32_t)0x20000000U) /*!< Mask MAC Address high reg bits [15:8] */
+#define ETH_MAC_ADDRESSMASK_BYTE5 ((uint32_t)0x10000000U) /*!< Mask MAC Address high reg bits [7:0] */
+#define ETH_MAC_ADDRESSMASK_BYTE4 ((uint32_t)0x08000000U) /*!< Mask MAC Address low reg bits [31:24] */
+#define ETH_MAC_ADDRESSMASK_BYTE3 ((uint32_t)0x04000000U) /*!< Mask MAC Address low reg bits [23:16] */
+#define ETH_MAC_ADDRESSMASK_BYTE2 ((uint32_t)0x02000000U) /*!< Mask MAC Address low reg bits [15:8] */
+#define ETH_MAC_ADDRESSMASK_BYTE1 ((uint32_t)0x01000000U) /*!< Mask MAC Address low reg bits [70] */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Drop_TCP_IP_Checksum_Error_Frame ETH Drop TCP IP Checksum Error Frame
+ * @{
+ */
+#define ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE ((uint32_t)0x00000000U)
+#define ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE ((uint32_t)0x04000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Store_Forward ETH Receive Store Forward
+ * @{
+ */
+#define ETH_RECEIVESTOREFORWARD_ENABLE ((uint32_t)0x02000000U)
+#define ETH_RECEIVESTOREFORWARD_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Flush_Received_Frame ETH Flush Received Frame
+ * @{
+ */
+#define ETH_FLUSHRECEIVEDFRAME_ENABLE ((uint32_t)0x00000000U)
+#define ETH_FLUSHRECEIVEDFRAME_DISABLE ((uint32_t)0x01000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Transmit_Store_Forward ETH Transmit Store Forward
+ * @{
+ */
+#define ETH_TRANSMITSTOREFORWARD_ENABLE ((uint32_t)0x00200000U)
+#define ETH_TRANSMITSTOREFORWARD_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Transmit_Threshold_Control ETH Transmit Threshold Control
+ * @{
+ */
+#define ETH_TRANSMITTHRESHOLDCONTROL_64BYTES ((uint32_t)0x00000000U) /*!< threshold level of the MTL Transmit FIFO is 64 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_128BYTES ((uint32_t)0x00004000U) /*!< threshold level of the MTL Transmit FIFO is 128 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_192BYTES ((uint32_t)0x00008000U) /*!< threshold level of the MTL Transmit FIFO is 192 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_256BYTES ((uint32_t)0x0000C000U) /*!< threshold level of the MTL Transmit FIFO is 256 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_40BYTES ((uint32_t)0x00010000U) /*!< threshold level of the MTL Transmit FIFO is 40 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_32BYTES ((uint32_t)0x00014000U) /*!< threshold level of the MTL Transmit FIFO is 32 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_24BYTES ((uint32_t)0x00018000U) /*!< threshold level of the MTL Transmit FIFO is 24 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_16BYTES ((uint32_t)0x0001C000U) /*!< threshold level of the MTL Transmit FIFO is 16 Bytes */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Forward_Error_Frames ETH Forward Error Frames
+ * @{
+ */
+#define ETH_FORWARDERRORFRAMES_ENABLE ((uint32_t)0x00000080U)
+#define ETH_FORWARDERRORFRAMES_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Forward_Undersized_Good_Frames ETH Forward Undersized Good Frames
+ * @{
+ */
+#define ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE ((uint32_t)0x00000040U)
+#define ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Threshold_Control ETH Receive Threshold Control
+ * @{
+ */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES ((uint32_t)0x00000000U) /*!< threshold level of the MTL Receive FIFO is 64 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES ((uint32_t)0x00000008U) /*!< threshold level of the MTL Receive FIFO is 32 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES ((uint32_t)0x00000010U) /*!< threshold level of the MTL Receive FIFO is 96 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES ((uint32_t)0x00000018U) /*!< threshold level of the MTL Receive FIFO is 128 Bytes */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Second_Frame_Operate ETH Second Frame Operate
+ * @{
+ */
+#define ETH_SECONDFRAMEOPERARTE_ENABLE ((uint32_t)0x00000004U)
+#define ETH_SECONDFRAMEOPERARTE_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Address_Aligned_Beats ETH Address Aligned Beats
+ * @{
+ */
+#define ETH_ADDRESSALIGNEDBEATS_ENABLE ((uint32_t)0x02000000U)
+#define ETH_ADDRESSALIGNEDBEATS_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Fixed_Burst ETH Fixed Burst
+ * @{
+ */
+#define ETH_FIXEDBURST_ENABLE ((uint32_t)0x00010000U)
+#define ETH_FIXEDBURST_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Rx_DMA_Burst_Length ETH Rx DMA Burst Length
+ * @{
+ */
+#define ETH_RXDMABURSTLENGTH_1BEAT ((uint32_t)0x00020000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 1 */
+#define ETH_RXDMABURSTLENGTH_2BEAT ((uint32_t)0x00040000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 2 */
+#define ETH_RXDMABURSTLENGTH_4BEAT ((uint32_t)0x00080000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */
+#define ETH_RXDMABURSTLENGTH_8BEAT ((uint32_t)0x00100000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */
+#define ETH_RXDMABURSTLENGTH_16BEAT ((uint32_t)0x00200000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */
+#define ETH_RXDMABURSTLENGTH_32BEAT ((uint32_t)0x00400000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_4BEAT ((uint32_t)0x01020000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_8BEAT ((uint32_t)0x01040000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_16BEAT ((uint32_t)0x01080000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_32BEAT ((uint32_t)0x01100000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_64BEAT ((uint32_t)0x01200000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 64 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_128BEAT ((uint32_t)0x01400000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 128 */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Tx_DMA_Burst_Length ETH Tx DMA Burst Length
+ * @{
+ */
+#define ETH_TXDMABURSTLENGTH_1BEAT ((uint32_t)0x00000100U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */
+#define ETH_TXDMABURSTLENGTH_2BEAT ((uint32_t)0x00000200U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */
+#define ETH_TXDMABURSTLENGTH_4BEAT ((uint32_t)0x00000400U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+#define ETH_TXDMABURSTLENGTH_8BEAT ((uint32_t)0x00000800U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+#define ETH_TXDMABURSTLENGTH_16BEAT ((uint32_t)0x00001000U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+#define ETH_TXDMABURSTLENGTH_32BEAT ((uint32_t)0x00002000U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_4BEAT ((uint32_t)0x01000100U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_8BEAT ((uint32_t)0x01000200U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_16BEAT ((uint32_t)0x01000400U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_32BEAT ((uint32_t)0x01000800U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_64BEAT ((uint32_t)0x01001000U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_128BEAT ((uint32_t)0x01002000U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Enhanced_descriptor_format ETH DMA Enhanced descriptor format
+ * @{
+ */
+#define ETH_DMAENHANCEDDESCRIPTOR_ENABLE ((uint32_t)0x00000080U)
+#define ETH_DMAENHANCEDDESCRIPTOR_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Arbitration ETH DMA Arbitration
+ * @{
+ */
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1 ((uint32_t)0x00000000U)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1 ((uint32_t)0x00004000U)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1 ((uint32_t)0x00008000U)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1 ((uint32_t)0x0000C000U)
+#define ETH_DMAARBITRATION_RXPRIORTX ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Tx_descriptor_segment ETH DMA Tx descriptor segment
+ * @{
+ */
+#define ETH_DMATXDESC_LASTSEGMENTS ((uint32_t)0x40000000U) /*!< Last Segment */
+#define ETH_DMATXDESC_FIRSTSEGMENT ((uint32_t)0x20000000U) /*!< First Segment */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Tx_descriptor_Checksum_Insertion_Control ETH DMA Tx descriptor Checksum Insertion Control
+ * @{
+ */
+#define ETH_DMATXDESC_CHECKSUMBYPASS ((uint32_t)0x00000000U) /*!< Checksum engine bypass */
+#define ETH_DMATXDESC_CHECKSUMIPV4HEADER ((uint32_t)0x00400000U) /*!< IPv4 header checksum insertion */
+#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT ((uint32_t)0x00800000U) /*!< TCP/UDP/ICMP checksum insertion. Pseudo header checksum is assumed to be present */
+#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL ((uint32_t)0x00C00000U) /*!< TCP/UDP/ICMP checksum fully in hardware including pseudo header */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Rx_descriptor_buffers ETH DMA Rx descriptor buffers
+ * @{
+ */
+#define ETH_DMARXDESC_BUFFER1 ((uint32_t)0x00000000U) /*!< DMA Rx Desc Buffer1 */
+#define ETH_DMARXDESC_BUFFER2 ((uint32_t)0x00000001U) /*!< DMA Rx Desc Buffer2 */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_PMT_Flags ETH PMT Flags
+ * @{
+ */
+#define ETH_PMT_FLAG_WUFFRPR ((uint32_t)0x80000000U) /*!< Wake-Up Frame Filter Register Pointer Reset */
+#define ETH_PMT_FLAG_WUFR ((uint32_t)0x00000040U) /*!< Wake-Up Frame Received */
+#define ETH_PMT_FLAG_MPR ((uint32_t)0x00000020U) /*!< Magic Packet Received */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MMC_Tx_Interrupts ETH MMC Tx Interrupts
+ * @{
+ */
+#define ETH_MMC_IT_TGF ((uint32_t)0x00200000U) /*!< When Tx good frame counter reaches half the maximum value */
+#define ETH_MMC_IT_TGFMSC ((uint32_t)0x00008000U) /*!< When Tx good multi col counter reaches half the maximum value */
+#define ETH_MMC_IT_TGFSC ((uint32_t)0x00004000U) /*!< When Tx good single col counter reaches half the maximum value */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MMC_Rx_Interrupts ETH MMC Rx Interrupts
+ * @{
+ */
+#define ETH_MMC_IT_RGUF ((uint32_t)0x10020000U) /*!< When Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMC_IT_RFAE ((uint32_t)0x10000040U) /*!< When Rx alignment error counter reaches half the maximum value */
+#define ETH_MMC_IT_RFCE ((uint32_t)0x10000020U) /*!< When Rx crc error counter reaches half the maximum value */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_Flags ETH MAC Flags
+ * @{
+ */
+#define ETH_MAC_FLAG_TST ((uint32_t)0x00000200U) /*!< Time stamp trigger flag (on MAC) */
+#define ETH_MAC_FLAG_MMCT ((uint32_t)0x00000040U) /*!< MMC transmit flag */
+#define ETH_MAC_FLAG_MMCR ((uint32_t)0x00000020U) /*!< MMC receive flag */
+#define ETH_MAC_FLAG_MMC ((uint32_t)0x00000010U) /*!< MMC flag (on MAC) */
+#define ETH_MAC_FLAG_PMT ((uint32_t)0x00000008U) /*!< PMT flag (on MAC) */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Flags ETH DMA Flags
+ * @{
+ */
+#define ETH_DMA_FLAG_TST ((uint32_t)0x20000000U) /*!< Time-stamp trigger interrupt (on DMA) */
+#define ETH_DMA_FLAG_PMT ((uint32_t)0x10000000U) /*!< PMT interrupt (on DMA) */
+#define ETH_DMA_FLAG_MMC ((uint32_t)0x08000000U) /*!< MMC interrupt (on DMA) */
+#define ETH_DMA_FLAG_DATATRANSFERERROR ((uint32_t)0x00800000U) /*!< Error bits 0-Rx DMA, 1-Tx DMA */
+#define ETH_DMA_FLAG_READWRITEERROR ((uint32_t)0x01000000U) /*!< Error bits 0-write transfer, 1-read transfer */
+#define ETH_DMA_FLAG_ACCESSERROR ((uint32_t)0x02000000U) /*!< Error bits 0-data buffer, 1-desc. access */
+#define ETH_DMA_FLAG_NIS ((uint32_t)0x00010000U) /*!< Normal interrupt summary flag */
+#define ETH_DMA_FLAG_AIS ((uint32_t)0x00008000U) /*!< Abnormal interrupt summary flag */
+#define ETH_DMA_FLAG_ER ((uint32_t)0x00004000U) /*!< Early receive flag */
+#define ETH_DMA_FLAG_FBE ((uint32_t)0x00002000U) /*!< Fatal bus error flag */
+#define ETH_DMA_FLAG_ET ((uint32_t)0x00000400U) /*!< Early transmit flag */
+#define ETH_DMA_FLAG_RWT ((uint32_t)0x00000200U) /*!< Receive watchdog timeout flag */
+#define ETH_DMA_FLAG_RPS ((uint32_t)0x00000100U) /*!< Receive process stopped flag */
+#define ETH_DMA_FLAG_RBU ((uint32_t)0x00000080U) /*!< Receive buffer unavailable flag */
+#define ETH_DMA_FLAG_R ((uint32_t)0x00000040U) /*!< Receive flag */
+#define ETH_DMA_FLAG_TU ((uint32_t)0x00000020U) /*!< Underflow flag */
+#define ETH_DMA_FLAG_RO ((uint32_t)0x00000010U) /*!< Overflow flag */
+#define ETH_DMA_FLAG_TJT ((uint32_t)0x00000008U) /*!< Transmit jabber timeout flag */
+#define ETH_DMA_FLAG_TBU ((uint32_t)0x00000004U) /*!< Transmit buffer unavailable flag */
+#define ETH_DMA_FLAG_TPS ((uint32_t)0x00000002U) /*!< Transmit process stopped flag */
+#define ETH_DMA_FLAG_T ((uint32_t)0x00000001U) /*!< Transmit flag */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_Interrupts ETH MAC Interrupts
+ * @{
+ */
+#define ETH_MAC_IT_TST ((uint32_t)0x00000200U) /*!< Time stamp trigger interrupt (on MAC) */
+#define ETH_MAC_IT_MMCT ((uint32_t)0x00000040U) /*!< MMC transmit interrupt */
+#define ETH_MAC_IT_MMCR ((uint32_t)0x00000020U) /*!< MMC receive interrupt */
+#define ETH_MAC_IT_MMC ((uint32_t)0x00000010U) /*!< MMC interrupt (on MAC) */
+#define ETH_MAC_IT_PMT ((uint32_t)0x00000008U) /*!< PMT interrupt (on MAC) */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Interrupts ETH DMA Interrupts
+ * @{
+ */
+#define ETH_DMA_IT_TST ((uint32_t)0x20000000U) /*!< Time-stamp trigger interrupt (on DMA) */
+#define ETH_DMA_IT_PMT ((uint32_t)0x10000000U) /*!< PMT interrupt (on DMA) */
+#define ETH_DMA_IT_MMC ((uint32_t)0x08000000U) /*!< MMC interrupt (on DMA) */
+#define ETH_DMA_IT_NIS ((uint32_t)0x00010000U) /*!< Normal interrupt summary */
+#define ETH_DMA_IT_AIS ((uint32_t)0x00008000U) /*!< Abnormal interrupt summary */
+#define ETH_DMA_IT_ER ((uint32_t)0x00004000U) /*!< Early receive interrupt */
+#define ETH_DMA_IT_FBE ((uint32_t)0x00002000U) /*!< Fatal bus error interrupt */
+#define ETH_DMA_IT_ET ((uint32_t)0x00000400U) /*!< Early transmit interrupt */
+#define ETH_DMA_IT_RWT ((uint32_t)0x00000200U) /*!< Receive watchdog timeout interrupt */
+#define ETH_DMA_IT_RPS ((uint32_t)0x00000100U) /*!< Receive process stopped interrupt */
+#define ETH_DMA_IT_RBU ((uint32_t)0x00000080U) /*!< Receive buffer unavailable interrupt */
+#define ETH_DMA_IT_R ((uint32_t)0x00000040U) /*!< Receive interrupt */
+#define ETH_DMA_IT_TU ((uint32_t)0x00000020U) /*!< Underflow interrupt */
+#define ETH_DMA_IT_RO ((uint32_t)0x00000010U) /*!< Overflow interrupt */
+#define ETH_DMA_IT_TJT ((uint32_t)0x00000008U) /*!< Transmit jabber timeout interrupt */
+#define ETH_DMA_IT_TBU ((uint32_t)0x00000004U) /*!< Transmit buffer unavailable interrupt */
+#define ETH_DMA_IT_TPS ((uint32_t)0x00000002U) /*!< Transmit process stopped interrupt */
+#define ETH_DMA_IT_T ((uint32_t)0x00000001U) /*!< Transmit interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_transmit_process_state ETH DMA transmit process state
+ * @{
+ */
+#define ETH_DMA_TRANSMITPROCESS_STOPPED ((uint32_t)0x00000000U) /*!< Stopped - Reset or Stop Tx Command issued */
+#define ETH_DMA_TRANSMITPROCESS_FETCHING ((uint32_t)0x00100000U) /*!< Running - fetching the Tx descriptor */
+#define ETH_DMA_TRANSMITPROCESS_WAITING ((uint32_t)0x00200000U) /*!< Running - waiting for status */
+#define ETH_DMA_TRANSMITPROCESS_READING ((uint32_t)0x00300000U) /*!< Running - reading the data from host memory */
+#define ETH_DMA_TRANSMITPROCESS_SUSPENDED ((uint32_t)0x00600000U) /*!< Suspended - Tx Descriptor unavailable */
+#define ETH_DMA_TRANSMITPROCESS_CLOSING ((uint32_t)0x00700000U) /*!< Running - closing Rx descriptor */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup ETH_DMA_receive_process_state ETH DMA receive process state
+ * @{
+ */
+#define ETH_DMA_RECEIVEPROCESS_STOPPED ((uint32_t)0x00000000U) /*!< Stopped - Reset or Stop Rx Command issued */
+#define ETH_DMA_RECEIVEPROCESS_FETCHING ((uint32_t)0x00020000U) /*!< Running - fetching the Rx descriptor */
+#define ETH_DMA_RECEIVEPROCESS_WAITING ((uint32_t)0x00060000U) /*!< Running - waiting for packet */
+#define ETH_DMA_RECEIVEPROCESS_SUSPENDED ((uint32_t)0x00080000U) /*!< Suspended - Rx Descriptor unavailable */
+#define ETH_DMA_RECEIVEPROCESS_CLOSING ((uint32_t)0x000A0000U) /*!< Running - closing descriptor */
+#define ETH_DMA_RECEIVEPROCESS_QUEUING ((uint32_t)0x000E0000U) /*!< Running - queuing the receive frame into host memory */
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_overflow ETH DMA overflow
+ * @{
+ */
+#define ETH_DMA_OVERFLOW_RXFIFOCOUNTER ((uint32_t)0x10000000U) /*!< Overflow bit for FIFO overflow counter */
+#define ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER ((uint32_t)0x00010000U) /*!< Overflow bit for missed frame counter */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_EXTI_LINE_WAKEUP ETH EXTI LINE WAKEUP
+ * @{
+ */
+#define ETH_EXTI_LINE_WAKEUP ((uint32_t)0x00080000U) /*!< External interrupt line 19 Connected to the ETH EXTI Line */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup ETH_Exported_Macros ETH Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+/** @brief Reset ETH handle state
+ * @param __HANDLE__ specifies the ETH handle.
+ * @retval None
+ */
+#define __HAL_ETH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ETH_STATE_RESET)
+
+/**
+ * @brief Checks whether the specified Ethernet DMA Tx Desc flag is set or not.
+ * @param __HANDLE__ ETH Handle
+ * @param __FLAG__ specifies the flag of TDES0 to check.
+ * @retval the ETH_DMATxDescFlag (SET or RESET).
+ */
+#define __HAL_ETH_DMATXDESC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->TxDesc->Status & (__FLAG__) == (__FLAG__))
+
+/**
+ * @brief Checks whether the specified Ethernet DMA Rx Desc flag is set or not.
+ * @param __HANDLE__ ETH Handle
+ * @param __FLAG__ specifies the flag of RDES0 to check.
+ * @retval the ETH_DMATxDescFlag (SET or RESET).
+ */
+#define __HAL_ETH_DMARXDESC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->RxDesc->Status & (__FLAG__) == (__FLAG__))
+
+/**
+ * @brief Enables the specified DMA Rx Desc receive interrupt.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMARXDESC_ENABLE_IT(__HANDLE__) ((__HANDLE__)->RxDesc->ControlBufferSize &=(~(uint32_t)ETH_DMARXDESC_DIC))
+
+/**
+ * @brief Disables the specified DMA Rx Desc receive interrupt.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMARXDESC_DISABLE_IT(__HANDLE__) ((__HANDLE__)->RxDesc->ControlBufferSize |= ETH_DMARXDESC_DIC)
+
+/**
+ * @brief Set the specified DMA Rx Desc Own bit.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMARXDESC_SET_OWN_BIT(__HANDLE__) ((__HANDLE__)->RxDesc->Status |= ETH_DMARXDESC_OWN)
+
+/**
+ * @brief Returns the specified Ethernet DMA Tx Desc collision count.
+ * @param __HANDLE__ ETH Handle
+ * @retval The Transmit descriptor collision counter value.
+ */
+#define __HAL_ETH_DMATXDESC_GET_COLLISION_COUNT(__HANDLE__) (((__HANDLE__)->TxDesc->Status & ETH_DMATXDESC_CC) >> ETH_DMATXDESC_COLLISION_COUNTSHIFT)
+
+/**
+ * @brief Set the specified DMA Tx Desc Own bit.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_SET_OWN_BIT(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_OWN)
+
+/**
+ * @brief Enables the specified DMA Tx Desc Transmit interrupt.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_ENABLE_IT(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_IC)
+
+/**
+ * @brief Disables the specified DMA Tx Desc Transmit interrupt.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_DISABLE_IT(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_IC)
+
+/**
+ * @brief Selects the specified Ethernet DMA Tx Desc Checksum Insertion.
+ * @param __HANDLE__ ETH Handle
+ * @param __CHECKSUM__ specifies is the DMA Tx desc checksum insertion.
+ * This parameter can be one of the following values:
+ * @arg ETH_DMATXDESC_CHECKSUMBYPASS : Checksum bypass
+ * @arg ETH_DMATXDESC_CHECKSUMIPV4HEADER : IPv4 header checksum
+ * @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT : TCP/UDP/ICMP checksum. Pseudo header checksum is assumed to be present
+ * @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL : TCP/UDP/ICMP checksum fully in hardware including pseudo header
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_CHECKSUM_INSERTION(__HANDLE__, __CHECKSUM__) ((__HANDLE__)->TxDesc->Status |= (__CHECKSUM__))
+
+/**
+ * @brief Enables the DMA Tx Desc CRC.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_CRC_ENABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DC)
+
+/**
+ * @brief Disables the DMA Tx Desc CRC.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_CRC_DISABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DC)
+
+/**
+ * @brief Enables the DMA Tx Desc padding for frame shorter than 64 bytes.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_ENABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DP)
+
+/**
+ * @brief Disables the DMA Tx Desc padding for frame shorter than 64 bytes.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_DISABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DP)
+
+/**
+ * @brief Enables the specified Ethernet MAC interrupts.
+ * @param __HANDLE__ ETH Handle
+ * @param __INTERRUPT__ specifies the Ethernet MAC interrupt sources to be
+ * enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg ETH_MAC_IT_TST : Time stamp trigger interrupt
+ * @arg ETH_MAC_IT_PMT : PMT interrupt
+ * @retval None
+ */
+#define __HAL_ETH_MAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIMR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified Ethernet MAC interrupts.
+ * @param __HANDLE__ ETH Handle
+ * @param __INTERRUPT__ specifies the Ethernet MAC interrupt sources to be
+ * enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg ETH_MAC_IT_TST : Time stamp trigger interrupt
+ * @arg ETH_MAC_IT_PMT : PMT interrupt
+ * @retval None
+ */
+#define __HAL_ETH_MAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIMR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Initiate a Pause Control Frame (Full-duplex only).
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_INITIATE_PAUSE_CONTROL_FRAME(__HANDLE__) ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Checks whether the Ethernet flow control busy bit is set or not.
+ * @param __HANDLE__ ETH Handle
+ * @retval The new state of flow control busy status bit (SET or RESET).
+ */
+#define __HAL_ETH_GET_FLOW_CONTROL_BUSY_STATUS(__HANDLE__) (((__HANDLE__)->Instance->MACFCR & ETH_MACFCR_FCBBPA) == ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Enables the MAC Back Pressure operation activation (Half-duplex only).
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Disables the MAC BackPressure operation activation (Half-duplex only).
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACFCR &= ~ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Checks whether the specified Ethernet MAC flag is set or not.
+ * @param __HANDLE__ ETH Handle
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg ETH_MAC_FLAG_TST : Time stamp trigger flag
+ * @arg ETH_MAC_FLAG_MMCT : MMC transmit flag
+ * @arg ETH_MAC_FLAG_MMCR : MMC receive flag
+ * @arg ETH_MAC_FLAG_MMC : MMC flag
+ * @arg ETH_MAC_FLAG_PMT : PMT flag
+ * @retval The state of Ethernet MAC flag.
+ */
+#define __HAL_ETH_MAC_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->MACSR &( __FLAG__)) == ( __FLAG__))
+
+/**
+ * @brief Enables the specified Ethernet DMA interrupts.
+ * @param __HANDLE__ ETH Handle
+ * @param __INTERRUPT__ specifies the Ethernet DMA interrupt sources to be
+ * enabled @ref ETH_DMA_Interrupts
+ * @retval None
+ */
+#define __HAL_ETH_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMAIER |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified Ethernet DMA interrupts.
+ * @param __HANDLE__ ETH Handle
+ * @param __INTERRUPT__ specifies the Ethernet DMA interrupt sources to be
+ * disabled. @ref ETH_DMA_Interrupts
+ * @retval None
+ */
+#define __HAL_ETH_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMAIER &= ~(__INTERRUPT__))
+
+/**
+ * @brief Clears the Ethernet DMA IT pending bit.
+ * @param __HANDLE__ ETH Handle
+ * @param __INTERRUPT__ specifies the interrupt pending bit to clear. @ref ETH_DMA_Interrupts
+ * @retval None
+ */
+#define __HAL_ETH_DMA_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMASR =(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified Ethernet DMA flag is set or not.
+* @param __HANDLE__ ETH Handle
+ * @param __FLAG__ specifies the flag to check. @ref ETH_DMA_Flags
+ * @retval The new state of ETH_DMA_FLAG (SET or RESET).
+ */
+#define __HAL_ETH_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->DMASR &( __FLAG__)) == ( __FLAG__))
+
+/**
+ * @brief Checks whether the specified Ethernet DMA flag is set or not.
+ * @param __HANDLE__ ETH Handle
+ * @param __FLAG__ specifies the flag to clear. @ref ETH_DMA_Flags
+ * @retval The new state of ETH_DMA_FLAG (SET or RESET).
+ */
+#define __HAL_ETH_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->DMASR = (__FLAG__))
+
+/**
+ * @brief Checks whether the specified Ethernet DMA overflow flag is set or not.
+ * @param __HANDLE__ ETH Handle
+ * @param __OVERFLOW__ specifies the DMA overflow flag to check.
+ * This parameter can be one of the following values:
+ * @arg ETH_DMA_OVERFLOW_RXFIFOCOUNTER : Overflow for FIFO Overflows Counter
+ * @arg ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER : Overflow for Buffer Unavailable Missed Frame Counter
+ * @retval The state of Ethernet DMA overflow Flag (SET or RESET).
+ */
+#define __HAL_ETH_GET_DMA_OVERFLOW_STATUS(__HANDLE__, __OVERFLOW__) (((__HANDLE__)->Instance->DMAMFBOCR & (__OVERFLOW__)) == (__OVERFLOW__))
+
+/**
+ * @brief Set the DMA Receive status watchdog timer register value
+ * @param __HANDLE__ ETH Handle
+ * @param __VALUE__ DMA Receive status watchdog timer register value
+ * @retval None
+ */
+#define __HAL_ETH_SET_RECEIVE_WATCHDOG_TIMER(__HANDLE__, __VALUE__) ((__HANDLE__)->Instance->DMARSWTR = (__VALUE__))
+
+/**
+ * @brief Enables any unicast packet filtered by the MAC address
+ * recognition to be a wake-up frame.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_GU)
+
+/**
+ * @brief Disables any unicast packet filtered by the MAC address
+ * recognition to be a wake-up frame.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_GU)
+
+/**
+ * @brief Enables the MAC Wake-Up Frame Detection.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_FRAME_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_WFE)
+
+/**
+ * @brief Disables the MAC Wake-Up Frame Detection.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_FRAME_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE)
+
+/**
+ * @brief Enables the MAC Magic Packet Detection.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MAGIC_PACKET_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_MPE)
+
+/**
+ * @brief Disables the MAC Magic Packet Detection.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MAGIC_PACKET_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE)
+
+/**
+ * @brief Enables the MAC Power Down.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_POWER_DOWN_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_PD)
+
+/**
+ * @brief Disables the MAC Power Down.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_POWER_DOWN_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_PD)
+
+/**
+ * @brief Checks whether the specified Ethernet PMT flag is set or not.
+ * @param __HANDLE__ ETH Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg ETH_PMT_FLAG_WUFFRPR : Wake-Up Frame Filter Register Pointer Reset
+ * @arg ETH_PMT_FLAG_WUFR : Wake-Up Frame Received
+ * @arg ETH_PMT_FLAG_MPR : Magic Packet Received
+ * @retval The new state of Ethernet PMT Flag (SET or RESET).
+ */
+#define __HAL_ETH_GET_PMT_FLAG_STATUS(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->MACPMTCSR &( __FLAG__)) == ( __FLAG__))
+
+/**
+ * @brief Preset and Initialize the MMC counters to almost-full value: 0xFFFF_FFF0 (full - 16)
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_FULL_PRESET(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= (ETH_MMCCR_MCFHP | ETH_MMCCR_MCP))
+
+/**
+ * @brief Preset and Initialize the MMC counters to almost-half value: 0x7FFF_FFF0 (half - 16)
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_HALF_PRESET(__HANDLE__) do{(__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCFHP;\
+ (__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCP;} while (0)
+
+/**
+ * @brief Enables the MMC Counter Freeze.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_FREEZE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCF)
+
+/**
+ * @brief Disables the MMC Counter Freeze.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_FREEZE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCF)
+
+/**
+ * @brief Enables the MMC Reset On Read.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_RESET_ONREAD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_ROR)
+
+/**
+ * @brief Disables the MMC Reset On Read.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_RESET_ONREAD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_ROR)
+
+/**
+ * @brief Enables the MMC Counter Stop Rollover.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_CSR)
+
+/**
+ * @brief Disables the MMC Counter Stop Rollover.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CSR)
+
+/**
+ * @brief Resets the MMC Counters.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTERS_RESET(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CR)
+
+/**
+ * @brief Enables the specified Ethernet MMC Rx interrupts.
+ * @param __HANDLE__ ETH Handle.
+ * @param __INTERRUPT__ specifies the Ethernet MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_RGUF : When Rx good unicast frames counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFAE : When Rx alignment error counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFCE : When Rx crc error counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_RX_IT_ENABLE(__HANDLE__, __INTERRUPT__) (__HANDLE__)->Instance->MMCRIMR &= ~((__INTERRUPT__) & 0xEFFFFFFF)
+/**
+ * @brief Disables the specified Ethernet MMC Rx interrupts.
+ * @param __HANDLE__ ETH Handle.
+ * @param __INTERRUPT__ specifies the Ethernet MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_RGUF : When Rx good unicast frames counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFAE : When Rx alignment error counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFCE : When Rx crc error counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_RX_IT_DISABLE(__HANDLE__, __INTERRUPT__) (__HANDLE__)->Instance->MMCRIMR |= ((__INTERRUPT__) & 0xEFFFFFFF)
+/**
+ * @brief Enables the specified Ethernet MMC Tx interrupts.
+ * @param __HANDLE__ ETH Handle.
+ * @param __INTERRUPT__ specifies the Ethernet MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_TGF : When Tx good frame counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_TX_IT_ENABLE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MMCRIMR &= ~ (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified Ethernet MMC Tx interrupts.
+ * @param __HANDLE__ ETH Handle.
+ * @param __INTERRUPT__ specifies the Ethernet MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_TGF : When Tx good frame counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_TX_IT_DISABLE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MMCRIMR |= (__INTERRUPT__))
+
+/**
+ * @brief Enables the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Disables the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Enable event on ETH External event line.
+ * @retval None.
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_EVENT() EXTI->EMR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Disable event on ETH External event line
+ * @retval None.
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_EVENT() EXTI->EMR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Get flag of the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Clear flag of the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Enables rising edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER() EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP
+
+/**
+ * @brief Disables the rising edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_RISING_EDGE_TRIGGER() EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Enables falling edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER() EXTI->FTSR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Disables falling edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_FALLING_EDGE_TRIGGER() EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Enables rising/falling edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER() do{EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP;\
+ EXTI->FTSR |= ETH_EXTI_LINE_WAKEUP;\
+ }while(0)
+
+/**
+ * @brief Disables rising/falling edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_FALLINGRISING_TRIGGER() do{EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP);\
+ EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP);\
+ }while(0)
+
+/**
+ * @brief Generate a Software interrupt on selected EXTI line.
+ * @retval None.
+ */
+#define __HAL_ETH_WAKEUP_EXTI_GENERATE_SWIT() EXTI->SWIER|= ETH_EXTI_LINE_WAKEUP
+
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup ETH_Exported_Functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+
+/** @addtogroup ETH_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t* TxBuff, uint32_t TxBuffCount);
+HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount);
+
+/**
+ * @}
+ */
+/* IO operation functions ****************************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group2
+ * @{
+ */
+HAL_StatusTypeDef HAL_ETH_TransmitFrame(ETH_HandleTypeDef *heth, uint32_t FrameLength);
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame(ETH_HandleTypeDef *heth);
+/* Communication with PHY functions*/
+HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue);
+HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t RegValue);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame_IT(ETH_HandleTypeDef *heth);
+void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth);
+/* Callback in non blocking modes (Interrupt) */
+void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions **********************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group3
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_ConfigMAC(ETH_HandleTypeDef *heth, ETH_MACInitTypeDef *macconf);
+HAL_StatusTypeDef HAL_ETH_ConfigDMA(ETH_HandleTypeDef *heth, ETH_DMAInitTypeDef *dmaconf);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group4
+ * @{
+ */
+HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* ETH */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_ETH_H */
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h
new file mode 100644
index 00000000..4f4ea732
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h
@@ -0,0 +1,424 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_flash.h
+ * @author MCD Application Team
+ * @brief Header file of FLASH HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_FLASH_H
+#define __STM32F7xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+ * @{
+ */
+
+/**
+ * @brief FLASH Procedure structure definition
+ */
+typedef enum
+{
+ FLASH_PROC_NONE = 0U,
+ FLASH_PROC_SECTERASE,
+ FLASH_PROC_MASSERASE,
+ FLASH_PROC_PROGRAM
+} FLASH_ProcedureTypeDef;
+
+
+/**
+ * @brief FLASH handle Structure definition
+ */
+typedef struct
+{
+ __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */
+
+ __IO uint32_t NbSectorsToErase; /* Internal variable to save the remaining sectors to erase in IT context */
+
+ __IO uint8_t VoltageForErase; /* Internal variable to provide voltage range selected by user in IT context */
+
+ __IO uint32_t Sector; /* Internal variable to define the current sector which is erasing */
+
+ __IO uint32_t Address; /* Internal variable to save address selected for program */
+
+ HAL_LockTypeDef Lock; /* FLASH locking object */
+
+ __IO uint32_t ErrorCode; /* FLASH error code */
+
+}FLASH_ProcessTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+
+/** @defgroup FLASH_Error_Code FLASH Error Code
+ * @brief FLASH Error Code
+ * @{
+ */
+#define HAL_FLASH_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_FLASH_ERROR_ERS ((uint32_t)0x00000002U) /*!< Programming Sequence error */
+#define HAL_FLASH_ERROR_PGP ((uint32_t)0x00000004U) /*!< Programming Parallelism error */
+#define HAL_FLASH_ERROR_PGA ((uint32_t)0x00000008U) /*!< Programming Alignment error */
+#define HAL_FLASH_ERROR_WRP ((uint32_t)0x00000010U) /*!< Write protection error */
+#define HAL_FLASH_ERROR_OPERATION ((uint32_t)0x00000020U) /*!< Operation Error */
+#define HAL_FLASH_ERROR_RD ((uint32_t)0x00000040U) /*!< Read Protection Error */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+ * @{
+ */
+#define FLASH_TYPEPROGRAM_BYTE ((uint32_t)0x00U) /*!< Program byte (8-bit) at a specified address */
+#define FLASH_TYPEPROGRAM_HALFWORD ((uint32_t)0x01U) /*!< Program a half-word (16-bit) at a specified address */
+#define FLASH_TYPEPROGRAM_WORD ((uint32_t)0x02U) /*!< Program a word (32-bit) at a specified address */
+#define FLASH_TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03U) /*!< Program a double word (64-bit) at a specified address */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Flag_definition FLASH Flag definition
+ * @brief Flag definition
+ * @{
+ */
+#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
+#define FLASH_FLAG_OPERR FLASH_SR_OPERR /*!< FLASH operation Error flag */
+#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
+#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */
+#define FLASH_FLAG_ERSERR FLASH_SR_ERSERR /*!< FLASH Erasing Sequence error flag */
+#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
+
+#if defined (FLASH_OPTCR2_PCROP)
+#define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< FLASH Read protection error flag */
+#define FLASH_FLAG_ALL_ERRORS (FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+ FLASH_FLAG_PGPERR | FLASH_FLAG_ERSERR | FLASH_FLAG_RDERR)
+#else
+#define FLASH_FLAG_ALL_ERRORS (FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+ FLASH_FLAG_PGPERR | FLASH_FLAG_ERSERR)
+#endif /* FLASH_OPTCR2_PCROP */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
+ * @brief FLASH Interrupt definition
+ * @{
+ */
+#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_ERR ((uint32_t)0x02000000U) /*!< Error Interrupt source */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
+ * @{
+ */
+#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000U)
+#define FLASH_PSIZE_HALF_WORD ((uint32_t)FLASH_CR_PSIZE_0)
+#define FLASH_PSIZE_WORD ((uint32_t)FLASH_CR_PSIZE_1)
+#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)FLASH_CR_PSIZE)
+#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFFU)
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Keys FLASH Keys
+ * @{
+ */
+#define FLASH_KEY1 ((uint32_t)0x45670123U)
+#define FLASH_KEY2 ((uint32_t)0xCDEF89ABU)
+#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3BU)
+#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7FU)
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Sectors FLASH Sectors
+ * @{
+ */
+#define FLASH_SECTOR_0 ((uint32_t)0U) /*!< Sector Number 0 */
+#define FLASH_SECTOR_1 ((uint32_t)1U) /*!< Sector Number 1 */
+#define FLASH_SECTOR_2 ((uint32_t)2U) /*!< Sector Number 2 */
+#define FLASH_SECTOR_3 ((uint32_t)3U) /*!< Sector Number 3 */
+#define FLASH_SECTOR_4 ((uint32_t)4U) /*!< Sector Number 4 */
+#define FLASH_SECTOR_5 ((uint32_t)5U) /*!< Sector Number 5 */
+#define FLASH_SECTOR_6 ((uint32_t)6U) /*!< Sector Number 6 */
+#define FLASH_SECTOR_7 ((uint32_t)7U) /*!< Sector Number 7 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
+ * @{
+ */
+/**
+ * @brief Set the FLASH Latency.
+ * @param __LATENCY__ FLASH Latency
+ * The value of this parameter depend on device used within the same series
+ * @retval none
+ */
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) \
+ MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(__LATENCY__))
+
+/**
+ * @brief Get the FLASH Latency.
+ * @retval FLASH Latency
+ * The value of this parameter depend on device used within the same series
+ */
+#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
+
+/**
+ * @brief Enable the FLASH prefetch buffer.
+ * @retval none
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN)
+
+/**
+ * @brief Disable the FLASH prefetch buffer.
+ * @retval none
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
+
+/**
+ * @brief Enable the FLASH Adaptive Real-Time memory accelerator.
+ * @note The ART accelerator is available only for flash access on ITCM interface.
+ * @retval none
+ */
+#define __HAL_FLASH_ART_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_ARTEN)
+
+/**
+ * @brief Disable the FLASH Adaptive Real-Time memory accelerator.
+ * @retval none
+ */
+#define __HAL_FLASH_ART_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_ARTEN)
+
+/**
+ * @brief Resets the FLASH Adaptive Real-Time memory accelerator.
+ * @note This function must be used only when the Adaptive Real-Time memory accelerator
+ * is disabled.
+ * @retval None
+ */
+#define __HAL_FLASH_ART_RESET() (FLASH->ACR |= FLASH_ACR_ARTRST)
+
+/**
+ * @brief Enable the specified FLASH interrupt.
+ * @param __INTERRUPT__ FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified FLASH interrupt.
+ * @param __INTERRUPT__ FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
+
+/**
+ * @brief Get the specified FLASH flag status.
+ * @param __FLAG__ specifies the FLASH flag to check.
+ * This parameter can be one of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPERR : FLASH operation Error flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
+ * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+ * @arg FLASH_FLAG_ERSERR : FLASH Erasing Sequence error flag
+ * @arg FLASH_FLAG_BSY : FLASH Busy flag
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)))
+
+/**
+ * @brief Clear the specified FLASH flag.
+ * @param __FLAG__ specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPERR : FLASH operation Error flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
+ * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+ * @arg FLASH_FLAG_ERSERR : FLASH Erasing Sequence error flag
+ * @retval none
+ */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
+/**
+ * @}
+ */
+
+/* Include FLASH HAL Extension module */
+#include "stm32f7xx_hal_flash_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_Exported_Functions
+ * @{
+ */
+/** @addtogroup FLASH_Exported_Functions_Group1
+ * @{
+ */
+/* Program operation functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+/* FLASH IRQ handler method */
+void HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */
+void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions **********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+/* Option bytes control */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+uint32_t HAL_FLASH_GetError(void);
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Variables FLASH Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Constants FLASH Private Constants
+ * @{
+ */
+
+/**
+ * @brief OPTCR register byte 1 (Bits[15:8]) base address
+ */
+#define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15)
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FLASH_Private_Macros FLASH Private Macros
+ * @{
+ */
+
+/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters
+ * @{
+ */
+#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Functions FLASH Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h
new file mode 100644
index 00000000..a2bbd5b4
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h
@@ -0,0 +1,661 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_flash_ex.h
+ * @author MCD Application Team
+ * @brief Header file of FLASH HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_FLASH_EX_H
+#define __STM32F7xx_HAL_FLASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASHEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Types FLASH Exported Types
+ * @{
+ */
+
+/**
+ * @brief FLASH Erase structure definition
+ */
+typedef struct
+{
+ uint32_t TypeErase; /*!< Mass erase or sector Erase.
+ This parameter can be a value of @ref FLASHEx_Type_Erase */
+
+#if defined (FLASH_OPTCR_nDBANK)
+ uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled.
+ This parameter must be a value of @ref FLASHEx_Banks */
+#endif /* FLASH_OPTCR_nDBANK */
+
+ uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled
+ This parameter must be a value of @ref FLASHEx_Sectors */
+
+ uint32_t NbSectors; /*!< Number of sectors to be erased.
+ This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/
+
+ uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism
+ This parameter must be a value of @ref FLASHEx_Voltage_Range */
+
+} FLASH_EraseInitTypeDef;
+
+/**
+ * @brief FLASH Option Bytes Program structure definition
+ */
+typedef struct
+{
+ uint32_t OptionType; /*!< Option byte to be configured.
+ This parameter can be a value of @ref FLASHEx_Option_Type */
+
+ uint32_t WRPState; /*!< Write protection activation or deactivation.
+ This parameter can be a value of @ref FLASHEx_WRP_State */
+
+ uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected.
+ The value of this parameter depend on device used within the same series */
+
+ uint32_t RDPLevel; /*!< Set the read protection level.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */
+
+ uint32_t BORLevel; /*!< Set the BOR Level.
+ This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */
+
+ uint32_t USERConfig; /*!< Program the FLASH User Option Byte: WWDG_SW / IWDG_SW / RST_STOP / RST_STDBY /
+ IWDG_FREEZE_STOP / IWDG_FREEZE_SANDBY / nDBANK / nDBOOT.
+ nDBANK / nDBOOT are only available for STM32F76xxx/STM32F77xxx devices */
+
+ uint32_t BootAddr0; /*!< Boot base address when Boot pin = 0.
+ This parameter can be a value of @ref FLASHEx_Boot_Address */
+
+ uint32_t BootAddr1; /*!< Boot base address when Boot pin = 1.
+ This parameter can be a value of @ref FLASHEx_Boot_Address */
+
+#if defined (FLASH_OPTCR2_PCROP)
+ uint32_t PCROPSector; /*!< Set the PCROP sector.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_PCROP_Sectors */
+
+ uint32_t PCROPRdp; /*!< Set the PCROP_RDP option.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_PCROP_RDP */
+#endif /* FLASH_OPTCR2_PCROP */
+
+} FLASH_OBProgramInitTypeDef;
+
+/**
+ * @}
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+
+/** @defgroup FLASHEx_Type_Erase FLASH Type Erase
+ * @{
+ */
+#define FLASH_TYPEERASE_SECTORS ((uint32_t)0x00U) /*!< Sectors erase only */
+#define FLASH_TYPEERASE_MASSERASE ((uint32_t)0x01U) /*!< Flash Mass erase activation */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range
+ * @{
+ */
+#define FLASH_VOLTAGE_RANGE_1 ((uint32_t)0x00U) /*!< Device operating range: 1.8V to 2.1V */
+#define FLASH_VOLTAGE_RANGE_2 ((uint32_t)0x01U) /*!< Device operating range: 2.1V to 2.7V */
+#define FLASH_VOLTAGE_RANGE_3 ((uint32_t)0x02U) /*!< Device operating range: 2.7V to 3.6V */
+#define FLASH_VOLTAGE_RANGE_4 ((uint32_t)0x03U) /*!< Device operating range: 2.7V to 3.6V + External Vpp */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_WRP_State FLASH WRP State
+ * @{
+ */
+#define OB_WRPSTATE_DISABLE ((uint32_t)0x00U) /*!< Disable the write protection of the desired bank 1 sectors */
+#define OB_WRPSTATE_ENABLE ((uint32_t)0x01U) /*!< Enable the write protection of the desired bank 1 sectors */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Type FLASH Option Type
+ * @{
+ */
+#define OPTIONBYTE_WRP ((uint32_t)0x01U) /*!< WRP option byte configuration */
+#define OPTIONBYTE_RDP ((uint32_t)0x02U) /*!< RDP option byte configuration */
+#define OPTIONBYTE_USER ((uint32_t)0x04U) /*!< USER option byte configuration */
+#define OPTIONBYTE_BOR ((uint32_t)0x08U) /*!< BOR option byte configuration */
+#define OPTIONBYTE_BOOTADDR_0 ((uint32_t)0x10U) /*!< Boot 0 Address configuration */
+#define OPTIONBYTE_BOOTADDR_1 ((uint32_t)0x20U) /*!< Boot 1 Address configuration */
+#if defined (FLASH_OPTCR2_PCROP)
+#define OPTIONBYTE_PCROP ((uint32_t)0x40U) /*!< PCROP configuration */
+#define OPTIONBYTE_PCROP_RDP ((uint32_t)0x80U) /*!< PCROP_RDP configuration */
+#endif /* FLASH_OPTCR2_PCROP */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection
+ * @{
+ */
+#define OB_RDP_LEVEL_0 ((uint8_t)0xAAU)
+#define OB_RDP_LEVEL_1 ((uint8_t)0x55U)
+#define OB_RDP_LEVEL_2 ((uint8_t)0xCCU) /*!< Warning: When enabling read protection level 2
+ it s no more possible to go back to level 1 or 0 */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_WWatchdog FLASH Option Bytes WWatchdog
+ * @{
+ */
+#define OB_WWDG_SW ((uint32_t)0x10U) /*!< Software WWDG selected */
+#define OB_WWDG_HW ((uint32_t)0x00U) /*!< Hardware WWDG selected */
+/**
+ * @}
+ */
+
+
+/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog
+ * @{
+ */
+#define OB_IWDG_SW ((uint32_t)0x20U) /*!< Software IWDG selected */
+#define OB_IWDG_HW ((uint32_t)0x00U) /*!< Hardware IWDG selected */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP
+ * @{
+ */
+#define OB_STOP_NO_RST ((uint32_t)0x40U) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST ((uint32_t)0x00U) /*!< Reset generated when entering in STOP */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY
+ * @{
+ */
+#define OB_STDBY_NO_RST ((uint32_t)0x80U) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST ((uint32_t)0x00U) /*!< Reset generated when entering in STANDBY */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_IWDG_FREEZE_STOP FLASH IWDG Counter Freeze in STOP
+ * @{
+ */
+#define OB_IWDG_STOP_FREEZE ((uint32_t)0x00000000U) /*!< Freeze IWDG counter in STOP mode */
+#define OB_IWDG_STOP_ACTIVE ((uint32_t)0x80000000U) /*!< IWDG counter active in STOP mode */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_IWDG_FREEZE_SANDBY FLASH IWDG Counter Freeze in STANDBY
+ * @{
+ */
+#define OB_IWDG_STDBY_FREEZE ((uint32_t)0x00000000U) /*!< Freeze IWDG counter in STANDBY mode */
+#define OB_IWDG_STDBY_ACTIVE ((uint32_t)0x40000000U) /*!< IWDG counter active in STANDBY mode */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level
+ * @{
+ */
+#define OB_BOR_LEVEL3 ((uint32_t)0x00U) /*!< Supply voltage ranges from 2.70 to 3.60 V */
+#define OB_BOR_LEVEL2 ((uint32_t)0x04U) /*!< Supply voltage ranges from 2.40 to 2.70 V */
+#define OB_BOR_LEVEL1 ((uint32_t)0x08U) /*!< Supply voltage ranges from 2.10 to 2.40 V */
+#define OB_BOR_OFF ((uint32_t)0x0CU) /*!< Supply voltage ranges from 1.62 to 2.10 V */
+/**
+ * @}
+ */
+
+#if defined (FLASH_OPTCR_nDBOOT)
+/** @defgroup FLASHEx_Option_Bytes_nDBOOT FLASH Option Bytes nDBOOT
+ * @{
+ */
+#define OB_DUAL_BOOT_DISABLE ((uint32_t)0x10000000U) /* !< Dual Boot disable. Boot according to boot address option */
+#define OB_DUAL_BOOT_ENABLE ((uint32_t)0x00000000U) /* !< Dual Boot enable. Boot always from system memory if boot address in flash
+ (Dual bank Boot mode), or RAM if Boot address option in RAM */
+/**
+ * @}
+ */
+#endif /* FLASH_OPTCR_nDBOOT */
+
+#if defined (FLASH_OPTCR_nDBANK)
+/** @defgroup FLASHEx_Option_Bytes_nDBank FLASH Single Bank or Dual Bank
+ * @{
+ */
+#define OB_NDBANK_SINGLE_BANK ((uint32_t)0x20000000U) /*!< NDBANK bit is set : Single Bank mode */
+#define OB_NDBANK_DUAL_BANK ((uint32_t)0x00000000U) /*!< NDBANK bit is reset : Dual Bank mode */
+/**
+ * @}
+ */
+#endif /* FLASH_OPTCR_nDBANK */
+
+/** @defgroup FLASHEx_Boot_Address FLASH Boot Address
+ * @{
+ */
+#define OB_BOOTADDR_ITCM_RAM ((uint32_t)0x0000U) /*!< Boot from ITCM RAM (0x00000000) */
+#define OB_BOOTADDR_SYSTEM ((uint32_t)0x0040U) /*!< Boot from System memory bootloader (0x00100000) */
+#define OB_BOOTADDR_ITCM_FLASH ((uint32_t)0x0080U) /*!< Boot from Flash on ITCM interface (0x00200000) */
+#define OB_BOOTADDR_AXIM_FLASH ((uint32_t)0x2000U) /*!< Boot from Flash on AXIM interface (0x08000000) */
+#define OB_BOOTADDR_DTCM_RAM ((uint32_t)0x8000U) /*!< Boot from DTCM RAM (0x20000000) */
+#define OB_BOOTADDR_SRAM1 ((uint32_t)0x8004U) /*!< Boot from SRAM1 (0x20010000) */
+#if (SRAM2_BASE == 0x2003C000U)
+#define OB_BOOTADDR_SRAM2 ((uint32_t)0x800FU) /*!< Boot from SRAM2 (0x2003C000) */
+#else
+#define OB_BOOTADDR_SRAM2 ((uint32_t)0x8013U) /*!< Boot from SRAM2 (0x2004C000) */
+#endif /* SRAM2_BASE == 0x2003C000U */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Latency FLASH Latency
+ * @{
+ */
+#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */
+#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */
+#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */
+#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */
+#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */
+#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */
+#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */
+#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */
+#define FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH Eight Latency cycles */
+#define FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH Nine Latency cycles */
+#define FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH Ten Latency cycles */
+#define FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH Eleven Latency cycles */
+#define FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH Twelve Latency cycles */
+#define FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH Thirteen Latency cycles */
+#define FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH Fourteen Latency cycles */
+#define FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH Fifteen Latency cycles */
+/**
+ * @}
+ */
+
+#if defined (FLASH_OPTCR_nDBANK)
+/** @defgroup FLASHEx_Banks FLASH Banks
+ * @{
+ */
+#define FLASH_BANK_1 ((uint32_t)0x01U) /*!< Bank 1 */
+#define FLASH_BANK_2 ((uint32_t)0x02U) /*!< Bank 2 */
+#define FLASH_BANK_BOTH ((uint32_t)(FLASH_BANK_1 | FLASH_BANK_2)) /*!< Bank1 and Bank2 */
+/**
+ * @}
+ */
+#endif /* FLASH_OPTCR_nDBANK */
+
+/** @defgroup FLASHEx_MassErase_bit FLASH Mass Erase bit
+ * @{
+ */
+#if defined (FLASH_OPTCR_nDBANK)
+#define FLASH_MER_BIT (FLASH_CR_MER1 | FLASH_CR_MER2) /*!< 2 MER bits */
+#else
+#define FLASH_MER_BIT (FLASH_CR_MER) /*!< only 1 MER bit */
+#endif /* FLASH_OPTCR_nDBANK */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Sectors FLASH Sectors
+ * @{
+ */
+#if (FLASH_SECTOR_TOTAL == 24)
+#define FLASH_SECTOR_8 ((uint32_t)8U) /*!< Sector Number 8 */
+#define FLASH_SECTOR_9 ((uint32_t)9U) /*!< Sector Number 9 */
+#define FLASH_SECTOR_10 ((uint32_t)10U) /*!< Sector Number 10 */
+#define FLASH_SECTOR_11 ((uint32_t)11U) /*!< Sector Number 11 */
+#define FLASH_SECTOR_12 ((uint32_t)12U) /*!< Sector Number 12 */
+#define FLASH_SECTOR_13 ((uint32_t)13U) /*!< Sector Number 13 */
+#define FLASH_SECTOR_14 ((uint32_t)14U) /*!< Sector Number 14 */
+#define FLASH_SECTOR_15 ((uint32_t)15U) /*!< Sector Number 15 */
+#define FLASH_SECTOR_16 ((uint32_t)16U) /*!< Sector Number 16 */
+#define FLASH_SECTOR_17 ((uint32_t)17U) /*!< Sector Number 17 */
+#define FLASH_SECTOR_18 ((uint32_t)18U) /*!< Sector Number 18 */
+#define FLASH_SECTOR_19 ((uint32_t)19U) /*!< Sector Number 19 */
+#define FLASH_SECTOR_20 ((uint32_t)20U) /*!< Sector Number 20 */
+#define FLASH_SECTOR_21 ((uint32_t)21U) /*!< Sector Number 21 */
+#define FLASH_SECTOR_22 ((uint32_t)22U) /*!< Sector Number 22 */
+#define FLASH_SECTOR_23 ((uint32_t)23U) /*!< Sector Number 23 */
+#endif /* FLASH_SECTOR_TOTAL == 24 */
+/**
+ * @}
+ */
+
+#if (FLASH_SECTOR_TOTAL == 24)
+/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
+ * @note For Single Bank mode, use OB_WRP_SECTOR_x defines: In fact, in FLASH_OPTCR register,
+ * nWRP[11:0] bits contain the value of the write-protection option bytes for sectors 0 to 11.
+ * For Dual Bank mode, use OB_WRP_DB_SECTOR_x defines: In fact, in FLASH_OPTCR register,
+ * nWRP[11:0] bits are divided on two groups, one group dedicated for bank 1 and
+ * a second one dedicated for bank 2 (nWRP[i] activates Write protection on sector 2*i and 2*i+1).
+ * This behavior is applicable only for STM32F76xxx / STM32F77xxx devices.
+ * @{
+ */
+/* Single Bank Sectors */
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Single Bank Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00020000U) /*!< Write protection of Single Bank Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00040000U) /*!< Write protection of Single Bank Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00080000U) /*!< Write protection of Single Bank Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00100000U) /*!< Write protection of Single Bank Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00200000U) /*!< Write protection of Single Bank Sector5 */
+#define OB_WRP_SECTOR_6 ((uint32_t)0x00400000U) /*!< Write protection of Single Bank Sector6 */
+#define OB_WRP_SECTOR_7 ((uint32_t)0x00800000U) /*!< Write protection of Single Bank Sector7 */
+#define OB_WRP_SECTOR_8 ((uint32_t)0x01000000U) /*!< Write protection of Single Bank Sector8 */
+#define OB_WRP_SECTOR_9 ((uint32_t)0x02000000U) /*!< Write protection of Single Bank Sector9 */
+#define OB_WRP_SECTOR_10 ((uint32_t)0x04000000U) /*!< Write protection of Single Bank Sector10 */
+#define OB_WRP_SECTOR_11 ((uint32_t)0x08000000U) /*!< Write protection of Single Bank Sector11 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x0FFF0000U) /*!< Write protection of all Sectors for Single Bank Flash */
+
+/* Dual Bank Sectors */
+#define OB_WRP_DB_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Dual Bank Sector0 */
+#define OB_WRP_DB_SECTOR_1 ((uint32_t)0x00010000U) /*!< Write protection of Dual Bank Sector1 */
+#define OB_WRP_DB_SECTOR_2 ((uint32_t)0x00020000U) /*!< Write protection of Dual Bank Sector2 */
+#define OB_WRP_DB_SECTOR_3 ((uint32_t)0x00020000U) /*!< Write protection of Dual Bank Sector3 */
+#define OB_WRP_DB_SECTOR_4 ((uint32_t)0x00040000U) /*!< Write protection of Dual Bank Sector4 */
+#define OB_WRP_DB_SECTOR_5 ((uint32_t)0x00040000U) /*!< Write protection of Dual Bank Sector5 */
+#define OB_WRP_DB_SECTOR_6 ((uint32_t)0x00080000U) /*!< Write protection of Dual Bank Sector6 */
+#define OB_WRP_DB_SECTOR_7 ((uint32_t)0x00080000U) /*!< Write protection of Dual Bank Sector7 */
+#define OB_WRP_DB_SECTOR_8 ((uint32_t)0x00100000U) /*!< Write protection of Dual Bank Sector8 */
+#define OB_WRP_DB_SECTOR_9 ((uint32_t)0x00100000U) /*!< Write protection of Dual Bank Sector9 */
+#define OB_WRP_DB_SECTOR_10 ((uint32_t)0x00200000U) /*!< Write protection of Dual Bank Sector10 */
+#define OB_WRP_DB_SECTOR_11 ((uint32_t)0x00200000U) /*!< Write protection of Dual Bank Sector11 */
+#define OB_WRP_DB_SECTOR_12 ((uint32_t)0x00400000U) /*!< Write protection of Dual Bank Sector12 */
+#define OB_WRP_DB_SECTOR_13 ((uint32_t)0x00400000U) /*!< Write protection of Dual Bank Sector13 */
+#define OB_WRP_DB_SECTOR_14 ((uint32_t)0x00800000U) /*!< Write protection of Dual Bank Sector14 */
+#define OB_WRP_DB_SECTOR_15 ((uint32_t)0x00800000U) /*!< Write protection of Dual Bank Sector15 */
+#define OB_WRP_DB_SECTOR_16 ((uint32_t)0x01000000U) /*!< Write protection of Dual Bank Sector16 */
+#define OB_WRP_DB_SECTOR_17 ((uint32_t)0x01000000U) /*!< Write protection of Dual Bank Sector17 */
+#define OB_WRP_DB_SECTOR_18 ((uint32_t)0x02000000U) /*!< Write protection of Dual Bank Sector18 */
+#define OB_WRP_DB_SECTOR_19 ((uint32_t)0x02000000U) /*!< Write protection of Dual Bank Sector19 */
+#define OB_WRP_DB_SECTOR_20 ((uint32_t)0x04000000U) /*!< Write protection of Dual Bank Sector20 */
+#define OB_WRP_DB_SECTOR_21 ((uint32_t)0x04000000U) /*!< Write protection of Dual Bank Sector21 */
+#define OB_WRP_DB_SECTOR_22 ((uint32_t)0x08000000U) /*!< Write protection of Dual Bank Sector22 */
+#define OB_WRP_DB_SECTOR_23 ((uint32_t)0x08000000U) /*!< Write protection of Dual Bank Sector23 */
+#define OB_WRP_DB_SECTOR_All ((uint32_t)0x0FFF0000U) /*!< Write protection of all Sectors for Dual Bank Flash */
+/**
+ * @}
+ */
+#endif /* FLASH_SECTOR_TOTAL == 24 */
+
+#if (FLASH_SECTOR_TOTAL == 8)
+/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
+ * @{
+ */
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00020000U) /*!< Write protection of Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00040000U) /*!< Write protection of Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00080000U) /*!< Write protection of Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00100000U) /*!< Write protection of Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00200000U) /*!< Write protection of Sector5 */
+#define OB_WRP_SECTOR_6 ((uint32_t)0x00400000U) /*!< Write protection of Sector6 */
+#define OB_WRP_SECTOR_7 ((uint32_t)0x00800000U) /*!< Write protection of Sector7 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x00FF0000U) /*!< Write protection of all Sectors */
+/**
+ * @}
+ */
+#endif /* FLASH_SECTOR_TOTAL == 8 */
+
+#if defined (FLASH_OPTCR2_PCROP)
+/** @defgroup FLASHEx_Option_Bytes_PCROP_Sectors FLASH Option Bytes PCROP Sectors
+ * @{
+ */
+#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001U) /*!< PC Readout protection of Sector0 */
+#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002U) /*!< PC Readout protection of Sector1 */
+#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004U) /*!< PC Readout protection of Sector2 */
+#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008U) /*!< PC Readout protection of Sector3 */
+#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010U) /*!< PC Readout protection of Sector4 */
+#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020U) /*!< PC Readout protection of Sector5 */
+#define OB_PCROP_SECTOR_6 ((uint32_t)0x00000040U) /*!< PC Readout protection of Sector6 */
+#define OB_PCROP_SECTOR_7 ((uint32_t)0x00000080U) /*!< PC Readout protection of Sector7 */
+#define OB_PCROP_SECTOR_All ((uint32_t)0x000000FFU) /*!< PC Readout protection of all Sectors */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_PCROP_RDP FLASH Option Bytes PCROP_RDP Bit
+ * @{
+ */
+#define OB_PCROP_RDP_ENABLE ((uint32_t)0x80000000U) /*!< PCROP_RDP Enable */
+#define OB_PCROP_RDP_DISABLE ((uint32_t)0x00000000U) /*!< PCROP_RDP Disable */
+/**
+ * @}
+ */
+#endif /* FLASH_OPTCR2_PCROP */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
+ * @{
+ */
+/**
+ * @brief Calculate the FLASH Boot Base Adress (BOOT_ADD0 or BOOT_ADD1)
+ * @note Returned value BOOT_ADDx[15:0] corresponds to boot address [29:14].
+ * @param __ADDRESS__ FLASH Boot Address (in the range 0x0000 0000 to 0x2004 FFFF with a granularity of 16KB)
+ * @retval The FLASH Boot Base Adress
+ */
+#define __HAL_FLASH_CALC_BOOT_BASE_ADR(__ADDRESS__) ((__ADDRESS__) >> 14)
+ /**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASHEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup FLASHEx_Exported_Functions_Group1
+ * @{
+ */
+/* Extension Program operation functions *************************************/
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError);
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Macros FLASH Private Macros
+ * @{
+ */
+
+/** @defgroup FLASHEx_IS_FLASH_Definitions FLASH Private macros to check input parameters
+ * @{
+ */
+
+#define IS_FLASH_TYPEERASE(VALUE)(((VALUE) == FLASH_TYPEERASE_SECTORS) || \
+ ((VALUE) == FLASH_TYPEERASE_MASSERASE))
+
+#define IS_VOLTAGERANGE(RANGE)(((RANGE) == FLASH_VOLTAGE_RANGE_1) || \
+ ((RANGE) == FLASH_VOLTAGE_RANGE_2) || \
+ ((RANGE) == FLASH_VOLTAGE_RANGE_3) || \
+ ((RANGE) == FLASH_VOLTAGE_RANGE_4))
+
+#define IS_WRPSTATE(VALUE)(((VALUE) == OB_WRPSTATE_DISABLE) || \
+ ((VALUE) == OB_WRPSTATE_ENABLE))
+
+#if defined (FLASH_OPTCR2_PCROP)
+#define IS_OPTIONBYTE(VALUE)(((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\
+ OPTIONBYTE_BOR | OPTIONBYTE_BOOTADDR_0 | OPTIONBYTE_BOOTADDR_1 |\
+ OPTIONBYTE_PCROP | OPTIONBYTE_PCROP_RDP)))
+#else
+#define IS_OPTIONBYTE(VALUE)(((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\
+ OPTIONBYTE_BOR | OPTIONBYTE_BOOTADDR_0 | OPTIONBYTE_BOOTADDR_1)))
+#endif /* FLASH_OPTCR2_PCROP */
+
+#define IS_OB_BOOT_ADDRESS(ADDRESS) ((ADDRESS) <= 0x8013)
+
+#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
+ ((LEVEL) == OB_RDP_LEVEL_1) ||\
+ ((LEVEL) == OB_RDP_LEVEL_2))
+
+#define IS_OB_WWDG_SOURCE(SOURCE) (((SOURCE) == OB_WWDG_SW) || ((SOURCE) == OB_WWDG_HW))
+
+#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
+
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
+
+#define IS_OB_IWDG_STOP_FREEZE(FREEZE) (((FREEZE) == OB_IWDG_STOP_FREEZE) || ((FREEZE) == OB_IWDG_STOP_ACTIVE))
+
+#define IS_OB_IWDG_STDBY_FREEZE(FREEZE) (((FREEZE) == OB_IWDG_STDBY_FREEZE) || ((FREEZE) == OB_IWDG_STDBY_ACTIVE))
+
+#define IS_OB_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\
+ ((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF))
+
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
+ ((LATENCY) == FLASH_LATENCY_1) || \
+ ((LATENCY) == FLASH_LATENCY_2) || \
+ ((LATENCY) == FLASH_LATENCY_3) || \
+ ((LATENCY) == FLASH_LATENCY_4) || \
+ ((LATENCY) == FLASH_LATENCY_5) || \
+ ((LATENCY) == FLASH_LATENCY_6) || \
+ ((LATENCY) == FLASH_LATENCY_7) || \
+ ((LATENCY) == FLASH_LATENCY_8) || \
+ ((LATENCY) == FLASH_LATENCY_9) || \
+ ((LATENCY) == FLASH_LATENCY_10) || \
+ ((LATENCY) == FLASH_LATENCY_11) || \
+ ((LATENCY) == FLASH_LATENCY_12) || \
+ ((LATENCY) == FLASH_LATENCY_13) || \
+ ((LATENCY) == FLASH_LATENCY_14) || \
+ ((LATENCY) == FLASH_LATENCY_15))
+
+#define IS_FLASH_ADDRESS(ADDRESS) ((((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= FLASH_END)) || \
+ (((ADDRESS) >= FLASH_OTP_BASE) && ((ADDRESS) <= FLASH_OTP_END)))
+#define IS_FLASH_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0U) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL))
+
+#if (FLASH_SECTOR_TOTAL == 8)
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
+ ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7))
+
+#define IS_OB_WRP_SECTOR(SECTOR) ((((SECTOR) & 0xFF00FFFFU) == 0x00000000U) && ((SECTOR) != 0x00000000U))
+#endif /* FLASH_SECTOR_TOTAL == 8 */
+
+#if (FLASH_SECTOR_TOTAL == 24)
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
+ ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7) ||\
+ ((SECTOR) == FLASH_SECTOR_8) || ((SECTOR) == FLASH_SECTOR_9) ||\
+ ((SECTOR) == FLASH_SECTOR_10) || ((SECTOR) == FLASH_SECTOR_11) ||\
+ ((SECTOR) == FLASH_SECTOR_12) || ((SECTOR) == FLASH_SECTOR_13) ||\
+ ((SECTOR) == FLASH_SECTOR_14) || ((SECTOR) == FLASH_SECTOR_15) ||\
+ ((SECTOR) == FLASH_SECTOR_16) || ((SECTOR) == FLASH_SECTOR_17) ||\
+ ((SECTOR) == FLASH_SECTOR_18) || ((SECTOR) == FLASH_SECTOR_19) ||\
+ ((SECTOR) == FLASH_SECTOR_20) || ((SECTOR) == FLASH_SECTOR_21) ||\
+ ((SECTOR) == FLASH_SECTOR_22) || ((SECTOR) == FLASH_SECTOR_23))
+
+#define IS_OB_WRP_SECTOR(SECTOR) ((((SECTOR) & 0xF000FFFFU) == 0x00000000U) && ((SECTOR) != 0x00000000U))
+#endif /* FLASH_SECTOR_TOTAL == 24 */
+
+#if defined (FLASH_OPTCR_nDBANK)
+#define IS_OB_NDBANK(VALUE) (((VALUE) == OB_NDBANK_SINGLE_BANK) || \
+ ((VALUE) == OB_NDBANK_DUAL_BANK))
+
+#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \
+ ((BANK) == FLASH_BANK_2) || \
+ ((BANK) == FLASH_BANK_BOTH))
+#endif /* FLASH_OPTCR_nDBANK */
+
+#if defined (FLASH_OPTCR_nDBOOT)
+#define IS_OB_NDBOOT(VALUE) (((VALUE) == OB_DUAL_BOOT_DISABLE) || \
+ ((VALUE) == OB_DUAL_BOOT_ENABLE))
+#endif /* FLASH_OPTCR_nDBOOT */
+
+#if defined (FLASH_OPTCR2_PCROP)
+#define IS_OB_PCROP_SECTOR(SECTOR) (((SECTOR) & (uint32_t)0xFFFFFF00U) == 0x00000000U)
+#define IS_OB_PCROP_RDP_VALUE(VALUE) (((VALUE) == OB_PCROP_RDP_DISABLE) || \
+ ((VALUE) == OB_PCROP_RDP_ENABLE))
+#endif /* FLASH_OPTCR2_PCROP */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Functions FLASH Private Functions
+ * @{
+ */
+void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_FLASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h
new file mode 100644
index 00000000..bb7954f6
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h
@@ -0,0 +1,325 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_gpio.h
+ * @author MCD Application Team
+ * @brief Header file of GPIO HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_GPIO_H
+#define __STM32F7xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+ * @{
+ */
+
+/**
+ * @brief GPIO Init structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_pins_define */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_mode_define */
+
+ uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+ This parameter can be a value of @ref GPIO_pull_define */
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_speed_define */
+
+ uint32_t Alternate; /*!< Peripheral to be connected to the selected pins.
+ This parameter can be a value of @ref GPIO_Alternate_function_selection */
+}GPIO_InitTypeDef;
+
+/**
+ * @brief GPIO Bit SET and Bit RESET enumeration
+ */
+typedef enum
+{
+ GPIO_PIN_RESET = 0,
+ GPIO_PIN_SET
+}GPIO_PinState;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIO_pins_define GPIO pins define
+ * @{
+ */
+#define GPIO_PIN_0 ((uint16_t)0x0001U) /* Pin 0 selected */
+#define GPIO_PIN_1 ((uint16_t)0x0002U) /* Pin 1 selected */
+#define GPIO_PIN_2 ((uint16_t)0x0004U) /* Pin 2 selected */
+#define GPIO_PIN_3 ((uint16_t)0x0008U) /* Pin 3 selected */
+#define GPIO_PIN_4 ((uint16_t)0x0010U) /* Pin 4 selected */
+#define GPIO_PIN_5 ((uint16_t)0x0020U) /* Pin 5 selected */
+#define GPIO_PIN_6 ((uint16_t)0x0040U) /* Pin 6 selected */
+#define GPIO_PIN_7 ((uint16_t)0x0080U) /* Pin 7 selected */
+#define GPIO_PIN_8 ((uint16_t)0x0100U) /* Pin 8 selected */
+#define GPIO_PIN_9 ((uint16_t)0x0200U) /* Pin 9 selected */
+#define GPIO_PIN_10 ((uint16_t)0x0400U) /* Pin 10 selected */
+#define GPIO_PIN_11 ((uint16_t)0x0800U) /* Pin 11 selected */
+#define GPIO_PIN_12 ((uint16_t)0x1000U) /* Pin 12 selected */
+#define GPIO_PIN_13 ((uint16_t)0x2000U) /* Pin 13 selected */
+#define GPIO_PIN_14 ((uint16_t)0x4000U) /* Pin 14 selected */
+#define GPIO_PIN_15 ((uint16_t)0x8000U) /* Pin 15 selected */
+#define GPIO_PIN_All ((uint16_t)0xFFFFU) /* All pins selected */
+
+#define GPIO_PIN_MASK ((uint32_t)0x0000FFFFU) /* PIN mask for assert test */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_mode_define GPIO mode define
+ * @brief GPIO Configuration Mode
+ * Elements values convention: 0xX0yz00YZ
+ * - X : GPIO mode or EXTI Mode
+ * - y : External IT or Event trigger detection
+ * - z : IO configuration on External IT or Event
+ * - Y : Output type (Push Pull or Open Drain)
+ * - Z : IO Direction mode (Input, Output, Alternate or Analog)
+ * @{
+ */
+#define GPIO_MODE_INPUT ((uint32_t)0x00000000U) /*!< Input Floating Mode */
+#define GPIO_MODE_OUTPUT_PP ((uint32_t)0x00000001U) /*!< Output Push Pull Mode */
+#define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011U) /*!< Output Open Drain Mode */
+#define GPIO_MODE_AF_PP ((uint32_t)0x00000002U) /*!< Alternate Function Push Pull Mode */
+#define GPIO_MODE_AF_OD ((uint32_t)0x00000012U) /*!< Alternate Function Open Drain Mode */
+
+#define GPIO_MODE_ANALOG ((uint32_t)0x00000003U) /*!< Analog Mode */
+
+#define GPIO_MODE_IT_RISING ((uint32_t)0x10110000U) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000U) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+
+#define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000U) /*!< External Event Mode with Rising edge trigger detection */
+#define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000U) /*!< External Event Mode with Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000U) /*!< External Event Mode with Rising/Falling edge trigger detection */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_speed_define GPIO speed define
+ * @brief GPIO Output Maximum frequency
+ * @{
+ */
+#define GPIO_SPEED_FREQ_LOW ((uint32_t)0x00000000U) /*!< Low speed */
+#define GPIO_SPEED_FREQ_MEDIUM ((uint32_t)0x00000001U) /*!< Medium speed */
+#define GPIO_SPEED_FREQ_HIGH ((uint32_t)0x00000002U) /*!< Fast speed */
+#define GPIO_SPEED_FREQ_VERY_HIGH ((uint32_t)0x00000003U) /*!< High speed */
+/**
+ * @}
+ */
+
+ /** @defgroup GPIO_pull_define GPIO pull define
+ * @brief GPIO Pull-Up or Pull-Down Activation
+ * @{
+ */
+#define GPIO_NOPULL ((uint32_t)0x00000000U) /*!< No Pull-up or Pull-down activation */
+#define GPIO_PULLUP ((uint32_t)0x00000001U) /*!< Pull-up activation */
+#define GPIO_PULLDOWN ((uint32_t)0x00000002U) /*!< Pull-down activation */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param __EXTI_LINE__ specifies the EXTI line flag to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending flags.
+ * @param __EXTI_LINE__ specifies the EXTI lines flags to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Checks whether the specified EXTI line is asserted or not.
+ * @param __EXTI_LINE__ specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending bits.
+ * @param __EXTI_LINE__ specifies the EXTI lines to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTI_LINE__ specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+/**
+ * @}
+ */
+
+/* Include GPIO HAL Extension module */
+#include "stm32f7xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
+/**
+ * @}
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Constants GPIO Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIO_Private_Macros GPIO Private Macros
+ * @{
+ */
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+#define IS_GPIO_PIN(__PIN__) ((((__PIN__) & GPIO_PIN_MASK) != (uint32_t)0x00))
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_PP) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_OD) ||\
+ ((MODE) == GPIO_MODE_AF_PP) ||\
+ ((MODE) == GPIO_MODE_AF_OD) ||\
+ ((MODE) == GPIO_MODE_IT_RISING) ||\
+ ((MODE) == GPIO_MODE_IT_FALLING) ||\
+ ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING) ||\
+ ((MODE) == GPIO_MODE_EVT_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_ANALOG))
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW) || ((SPEED) == GPIO_SPEED_MEDIUM) || \
+ ((SPEED) == GPIO_SPEED_FAST) || ((SPEED) == GPIO_SPEED_HIGH))
+#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
+ ((PULL) == GPIO_PULLDOWN))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Functions GPIO Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h
new file mode 100644
index 00000000..e1f6e21f
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h
@@ -0,0 +1,673 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_gpio_ex.h
+ * @author MCD Application Team
+ * @brief Header file of GPIO HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_GPIO_EX_H
+#define __STM32F7xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup GPIOEx GPIOEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection
+ * @{
+ */
+/*--------------- STM32F74xxx/STM32F75xxx/STM32F76xxx/STM32F77xxx -------------*/
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || defined (STM32F767xx) ||\
+ defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF1_UART5 ((uint8_t)0x01U) /* UART5 Alternate Function mapping */
+#define GPIO_AF1_I2C4 ((uint8_t)0x01U) /* I2C4 Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+#define GPIO_AF3_LPTIM1 ((uint8_t)0x03U) /* LPTIM1 Alternate Function mapping */
+#define GPIO_AF3_CEC ((uint8_t)0x03U) /* CEC Alternate Function mapping */
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF3_DFSDM1 ((uint8_t)0x03U) /* DFSDM1 Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF4_I2C4 ((uint8_t)0x04U) /* I2C4 Alternate Function mapping */
+#define GPIO_AF4_CEC ((uint8_t)0x04U) /* CEC Alternate Function mapping */
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF4_USART1 ((uint8_t)0x04) /* USART1 Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_SPI5 ((uint8_t)0x05U) /* SPI5 Alternate Function mapping */
+#define GPIO_AF5_SPI6 ((uint8_t)0x05U) /* SPI6 Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_SAI1 ((uint8_t)0x06U) /* SAI1 Alternate Function mapping */
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF6_UART4 ((uint8_t)0x06U) /* UART4 Alternate Function mapping */
+#define GPIO_AF6_DFSDM1 ((uint8_t)0x06U) /* DFSDM1 Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_UART5 ((uint8_t)0x07U) /* UART5 Alternate Function mapping */
+#define GPIO_AF7_SPDIFRX ((uint8_t)0x07U) /* SPDIF-RX Alternate Function mapping */
+#define GPIO_AF7_SPI2 ((uint8_t)0x07U) /* SPI2 Alternate Function mapping */
+#define GPIO_AF7_SPI3 ((uint8_t)0x07U) /* SPI3 Alternate Function mapping */
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF7_SPI6 ((uint8_t)0x07U) /* SPI6 Alternate Function mapping */
+#define GPIO_AF7_DFSDM1 ((uint8_t)0x07U) /* DFSDM1 Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_UART7 ((uint8_t)0x08U) /* UART7 Alternate Function mapping */
+#define GPIO_AF8_UART8 ((uint8_t)0x08U) /* UART8 Alternate Function mapping */
+#define GPIO_AF8_SPDIFRX ((uint8_t)0x08U) /* SPIDIF-RX Alternate Function mapping */
+#define GPIO_AF8_SAI2 ((uint8_t)0x08U) /* SAI2 Alternate Function mapping */
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF8_SPI6 ((uint8_t)0x08U) /* SPI6 Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09U) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_QUADSPI ((uint8_t)0x09U) /* QUADSPI Alternate Function mapping */
+#if defined(STM32F746xx) || defined(STM32F756xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF9_LTDC ((uint8_t)0x09U) /* LCD-TFT Alternate Function mapping */
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined(STM32F746xx) || defined(STM32F756xx) || defined(STM32F765xx) || defined(STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF9_FMC ((uint8_t)0x09U) /* FMC Alternate Function mapping */
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xAU) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0xAU) /* OTG_HS Alternate Function mapping */
+#define GPIO_AF10_QUADSPI ((uint8_t)0xAU) /* QUADSPI Alternate Function mapping */
+#define GPIO_AF10_SAI2 ((uint8_t)0xAU) /* SAI2 Alternate Function mapping */
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF10_DFSDM1 ((uint8_t)0x0AU) /* DFSDM1 Alternate Function mapping */
+#define GPIO_AF10_SDMMC2 ((uint8_t)0x0AU) /* SDMMC2 Alternate Function mapping */
+#define GPIO_AF10_LTDC ((uint8_t)0x0AU) /* LCD-TFT Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0BU) /* ETHERNET Alternate Function mapping */
+#if defined(STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define GPIO_AF11_CAN3 ((uint8_t)0x0BU) /* CAN3 Alternate Function mapping */
+#define GPIO_AF11_SDMMC2 ((uint8_t)0x0BU) /* SDMMC2 Alternate Function mapping */
+#define GPIO_AF11_I2C4 ((uint8_t)0x0BU) /* I2C4 Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FMC ((uint8_t)0xCU) /* FMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xCU) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDMMC1 ((uint8_t)0xCU) /* SDMMC1 Alternate Function mapping */
+#if defined(STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define GPIO_AF12_MDIOS ((uint8_t)0xCU) /* SDMMC1 Alternate Function mapping */
+#define GPIO_AF12_UART7 ((uint8_t)0xCU) /* UART7 Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0DU) /* DCMI Alternate Function mapping */
+#if defined (STM32F769xx) || defined (STM32F779xx)
+#define GPIO_AF13_DSI ((uint8_t)0x0DU) /* DSI Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined(STM32F746xx) || defined(STM32F756xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF13_LTDC ((uint8_t)0x0DU) /* LTDC Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+#define GPIO_AF14_LTDC ((uint8_t)0x0EU) /* LCD-TFT Alternate Function mapping */
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------- STM32F72xxx/STM32F73xxx -----------------------*/
+#if defined(STM32F722xx) || defined(STM32F723xx) || defined(STM32F732xx) || defined(STM32F733xx)
+ /**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+#define GPIO_AF3_LPTIM1 ((uint8_t)0x03U) /* LPTIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_SPI5 ((uint8_t)0x05U) /* SPI5 Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_SAI1 ((uint8_t)0x06U) /* SAI1 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_UART5 ((uint8_t)0x07U) /* UART5 Alternate Function mapping */
+#define GPIO_AF7_SPI2 ((uint8_t)0x07U) /* SPI2 Alternate Function mapping */
+#define GPIO_AF7_SPI3 ((uint8_t)0x07U) /* SPI3 Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_UART7 ((uint8_t)0x08U) /* UART7 Alternate Function mapping */
+#define GPIO_AF8_UART8 ((uint8_t)0x08U) /* UART8 Alternate Function mapping */
+#define GPIO_AF8_SAI2 ((uint8_t)0x08U) /* SAI2 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_QUADSPI ((uint8_t)0x09U) /* QUADSPI Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xAU) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0xAU) /* OTG_HS Alternate Function mapping */
+#define GPIO_AF10_QUADSPI ((uint8_t)0xAU) /* QUADSPI Alternate Function mapping */
+#define GPIO_AF10_SAI2 ((uint8_t)0xAU) /* SAI2 Alternate Function mapping */
+#define GPIO_AF10_SDMMC2 ((uint8_t)0x0AU) /* SDMMC2 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_SDMMC2 ((uint8_t)0x0BU) /* SDMMC2 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FMC ((uint8_t)0xCU) /* FMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xCU) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDMMC1 ((uint8_t)0xCU) /* SDMMC1 Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_RNG ((uint8_t)0x0DU) /* RNG Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx */
+/*----------------------------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Constants GPIO Private Constants
+ * @{
+ */
+
+/**
+ * @brief GPIO pin available on the platform
+ */
+/* Defines the available pins per GPIOs */
+#define GPIOA_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOB_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOC_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOD_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOE_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOF_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOG_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOI_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOJ_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOH_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOK_PIN_AVAILABLE (GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | \
+ GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7)
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Macros GPIO Private Macros
+ * @{
+ */
+/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index
+ * @{
+ */
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U :\
+ ((__GPIOx__) == (GPIOF))? 5U :\
+ ((__GPIOx__) == (GPIOG))? 6U :\
+ ((__GPIOx__) == (GPIOH))? 7U :\
+ ((__GPIOx__) == (GPIOI))? 8U :\
+ ((__GPIOx__) == (GPIOJ))? 9U : 10U)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx)
+#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U :\
+ ((__GPIOx__) == (GPIOF))? 5U :\
+ ((__GPIOx__) == (GPIOG))? 6U :\
+ ((__GPIOx__) == (GPIOH))? 7U : 8U)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx */
+/**
+ * @}
+ */
+
+#define IS_GPIO_PIN_AVAILABLE(__INSTANCE__,__PIN__) \
+ ((((__INSTANCE__) == GPIOA) && (((__PIN__) & (GPIOA_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOA_PIN_AVAILABLE)) == (GPIOA_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOB) && (((__PIN__) & (GPIOB_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOB_PIN_AVAILABLE)) == (GPIOB_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOC) && (((__PIN__) & (GPIOC_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOC_PIN_AVAILABLE)) == (GPIOC_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOD) && (((__PIN__) & (GPIOD_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOD_PIN_AVAILABLE)) == (GPIOD_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOE) && (((__PIN__) & (GPIOE_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOE_PIN_AVAILABLE)) == (GPIOE_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOF) && (((__PIN__) & (GPIOF_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOF_PIN_AVAILABLE)) == (GPIOF_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOG) && (((__PIN__) & (GPIOG_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOG_PIN_AVAILABLE)) == (GPIOG_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOI) && (((__PIN__) & (GPIOI_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOI_PIN_AVAILABLE)) == (GPIOI_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOJ) && (((__PIN__) & (GPIOJ_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOJ_PIN_AVAILABLE)) == (GPIOJ_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOK) && (((__PIN__) & (GPIOK_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOK_PIN_AVAILABLE)) == (GPIOK_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOH) && (((__PIN__) & (GPIOH_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOH_PIN_AVAILABLE)) == (GPIOH_PIN_AVAILABLE))))
+/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function
+ * @{
+ */
+#if defined(STM32F756xx) || defined(STM32F746xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
+ ((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
+ ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
+ ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
+ ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
+ ((AF) == GPIO_AF9_LTDC) || ((AF) == GPIO_AF10_OTG_FS) || \
+ ((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
+ ((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
+ ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDMMC1) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF15_EVENTOUT) || \
+ ((AF) == GPIO_AF13_DCMI) || ((AF) == GPIO_AF14_LTDC))
+#elif defined(STM32F745xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
+ ((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
+ ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
+ ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
+ ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
+ ((AF) == GPIO_AF13_DCMI) || ((AF) == GPIO_AF10_OTG_FS) || \
+ ((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
+ ((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
+ ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDMMC1) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF15_EVENTOUT))
+#elif defined(STM32F767xx) || defined(STM32F777xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
+ ((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
+ ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
+ ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
+ ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF9_LTDC) || \
+ ((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
+ ((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
+ ((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \
+ ((AF) == GPIO_AF11_CAN3) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDMMC1) || ((AF) == GPIO_AF12_FMC) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF14_LTDC))
+#elif defined(STM32F769xx) || defined(STM32F779xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
+ ((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
+ ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
+ ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
+ ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
+ ((AF) == GPIO_AF9_LTDC) || ((AF) == GPIO_AF10_OTG_FS) || \
+ ((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
+ ((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
+ ((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \
+ ((AF) == GPIO_AF11_CAN3) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDMMC1) || ((AF) == GPIO_AF12_FMC) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF14_LTDC) || ((AF) == GPIO_AF13_DSI))
+#elif defined(STM32F765xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
+ ((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
+ ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
+ ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
+ ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
+ ((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
+ ((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
+ ((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \
+ ((AF) == GPIO_AF11_CAN3) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDMMC1) || ((AF) == GPIO_AF12_FMC) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF10_OTG_FS))
+#elif defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
+ ((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF5_SPI3) || \
+ ((AF) == GPIO_AF5_SPI4) || ((AF) == GPIO_AF5_SPI5) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
+ ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF9_QUADSPI) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF10_SAI2) || ((AF) == GPIO_AF10_QUADSPI) || \
+ ((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \
+ ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDMMC1) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF15_EVENTOUT) || \
+ ((AF) == GPIO_AF10_OTG_FS))
+#endif /* STM32F756xx || STM32F746xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Functions GPIO Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_GPIO_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h
new file mode 100644
index 00000000..80b7a23f
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h
@@ -0,0 +1,710 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_i2c.h
+ * @author MCD Application Team
+ * @brief Header file of I2C HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_I2C_H
+#define __STM32F7xx_HAL_I2C_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2C
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2C_Exported_Types I2C Exported Types
+ * @{
+ */
+
+/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
+ * @brief I2C Configuration Structure definition
+ * @{
+ */
+typedef struct
+{
+ uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value.
+ This parameter calculated by referring to I2C initialization
+ section in Reference manual */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+ This parameter can be a value of @ref I2C_ADDRESSING_MODE */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected
+ This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref I2C_NOSTRETCH_MODE */
+
+} I2C_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_state_structure_definition HAL state structure definition
+ * @brief HAL State structure definition
+ * @note HAL I2C State value coding follow below described bitmap :\n
+ * b7-b6 Error information\n
+ * 00 : No Error\n
+ * 01 : Abort (Abort user request on going)\n
+ * 10 : Timeout\n
+ * 11 : Error\n
+ * b5 IP initilisation status\n
+ * 0 : Reset (IP not initialized)\n
+ * 1 : Init done (IP initialized and ready to use. HAL I2C Init function called)\n
+ * b4 (not used)\n
+ * x : Should be set to 0\n
+ * b3\n
+ * 0 : Ready or Busy (No Listen mode ongoing)\n
+ * 1 : Listen (IP in Address Listen Mode)\n
+ * b2 Intrinsic process state\n
+ * 0 : Ready\n
+ * 1 : Busy (IP busy with some configuration or internal operations)\n
+ * b1 Rx state\n
+ * 0 : Ready (no Rx operation ongoing)\n
+ * 1 : Busy (Rx operation ongoing)\n
+ * b0 Tx state\n
+ * 0 : Ready (no Tx operation ongoing)\n
+ * 1 : Busy (Tx operation ongoing)
+ * @{
+ */
+typedef enum
+{
+ HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
+ HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
+ HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
+ HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
+ HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
+ HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
+ HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
+ process is ongoing */
+ HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
+ process is ongoing */
+ HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
+ HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
+ HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */
+
+} HAL_I2C_StateTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_mode_structure_definition HAL mode structure definition
+ * @brief HAL Mode structure definition
+ * @note HAL I2C Mode value coding follow below described bitmap :\n
+ * b7 (not used)\n
+ * x : Should be set to 0\n
+ * b6\n
+ * 0 : None\n
+ * 1 : Memory (HAL I2C communication is in Memory Mode)\n
+ * b5\n
+ * 0 : None\n
+ * 1 : Slave (HAL I2C communication is in Slave Mode)\n
+ * b4\n
+ * 0 : None\n
+ * 1 : Master (HAL I2C communication is in Master Mode)\n
+ * b3-b2-b1-b0 (not used)\n
+ * xxxx : Should be set to 0000
+ * @{
+ */
+typedef enum
+{
+ HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */
+ HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */
+ HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */
+ HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */
+
+} HAL_I2C_ModeTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Error_Code_definition I2C Error Code definition
+ * @brief I2C Error Code definition
+ * @{
+ */
+#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */
+#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */
+#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */
+#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */
+#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */
+#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
+#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */
+#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */
+/**
+ * @}
+ */
+
+/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
+ * @brief I2C handle Structure definition
+ * @{
+ */
+typedef struct __I2C_HandleTypeDef
+{
+ I2C_TypeDef *Instance; /*!< I2C registers base address */
+
+ I2C_InitTypeDef Init; /*!< I2C communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
+
+ uint16_t XferSize; /*!< I2C transfer size */
+
+ __IO uint16_t XferCount; /*!< I2C transfer counter */
+
+ __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can
+ be a value of @ref I2C_XFEROPTIONS */
+
+ __IO uint32_t PreviousState; /*!< I2C communication Previous state */
+
+ HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); /*!< I2C transfer IRQ handler function pointer */
+
+ DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< I2C locking object */
+
+ __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
+
+ __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */
+
+ __IO uint32_t ErrorCode; /*!< I2C Error code */
+
+ __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */
+} I2C_HandleTypeDef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Constants I2C Exported Constants
+ * @{
+ */
+
+/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options
+ * @{
+ */
+#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE)
+#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
+#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
+#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
+#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
+#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode
+ * @{
+ */
+#define I2C_ADDRESSINGMODE_7BIT (0x00000001U)
+#define I2C_ADDRESSINGMODE_10BIT (0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode
+ * @{
+ */
+#define I2C_DUALADDRESS_DISABLE (0x00000000U)
+#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN
+/**
+ * @}
+ */
+
+/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks
+ * @{
+ */
+#define I2C_OA2_NOMASK ((uint8_t)0x00U)
+#define I2C_OA2_MASK01 ((uint8_t)0x01U)
+#define I2C_OA2_MASK02 ((uint8_t)0x02U)
+#define I2C_OA2_MASK03 ((uint8_t)0x03U)
+#define I2C_OA2_MASK04 ((uint8_t)0x04U)
+#define I2C_OA2_MASK05 ((uint8_t)0x05U)
+#define I2C_OA2_MASK06 ((uint8_t)0x06U)
+#define I2C_OA2_MASK07 ((uint8_t)0x07U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode
+ * @{
+ */
+#define I2C_GENERALCALL_DISABLE (0x00000000U)
+#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN
+/**
+ * @}
+ */
+
+/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode
+ * @{
+ */
+#define I2C_NOSTRETCH_DISABLE (0x00000000U)
+#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
+/**
+ * @}
+ */
+
+/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size
+ * @{
+ */
+#define I2C_MEMADD_SIZE_8BIT (0x00000001U)
+#define I2C_MEMADD_SIZE_16BIT (0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View
+ * @{
+ */
+#define I2C_DIRECTION_TRANSMIT (0x00000000U)
+#define I2C_DIRECTION_RECEIVE (0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode
+ * @{
+ */
+#define I2C_RELOAD_MODE I2C_CR2_RELOAD
+#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND
+#define I2C_SOFTEND_MODE (0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode
+ * @{
+ */
+#define I2C_NO_STARTSTOP (0x00000000U)
+#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP)
+#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)
+#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
+ * @brief I2C Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define I2C_IT_ERRI I2C_CR1_ERRIE
+#define I2C_IT_TCI I2C_CR1_TCIE
+#define I2C_IT_STOPI I2C_CR1_STOPIE
+#define I2C_IT_NACKI I2C_CR1_NACKIE
+#define I2C_IT_ADDRI I2C_CR1_ADDRIE
+#define I2C_IT_RXI I2C_CR1_RXIE
+#define I2C_IT_TXI I2C_CR1_TXIE
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Flag_definition I2C Flag definition
+ * @{
+ */
+#define I2C_FLAG_TXE I2C_ISR_TXE
+#define I2C_FLAG_TXIS I2C_ISR_TXIS
+#define I2C_FLAG_RXNE I2C_ISR_RXNE
+#define I2C_FLAG_ADDR I2C_ISR_ADDR
+#define I2C_FLAG_AF I2C_ISR_NACKF
+#define I2C_FLAG_STOPF I2C_ISR_STOPF
+#define I2C_FLAG_TC I2C_ISR_TC
+#define I2C_FLAG_TCR I2C_ISR_TCR
+#define I2C_FLAG_BERR I2C_ISR_BERR
+#define I2C_FLAG_ARLO I2C_ISR_ARLO
+#define I2C_FLAG_OVR I2C_ISR_OVR
+#define I2C_FLAG_PECERR I2C_ISR_PECERR
+#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT
+#define I2C_FLAG_ALERT I2C_ISR_ALERT
+#define I2C_FLAG_BUSY I2C_ISR_BUSY
+#define I2C_FLAG_DIR I2C_ISR_DIR
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Macros I2C Exported Macros
+ * @{
+ */
+
+/** @brief Reset I2C handle state.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+
+/** @brief Enable the specified I2C interrupt.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_IT_ERRI Errors interrupt enable
+ * @arg @ref I2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref I2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref I2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref I2C_IT_RXI RX interrupt enable
+ * @arg @ref I2C_IT_TXI TX interrupt enable
+ *
+ * @retval None
+ */
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+
+/** @brief Disable the specified I2C interrupt.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_IT_ERRI Errors interrupt enable
+ * @arg @ref I2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref I2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref I2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref I2C_IT_RXI RX interrupt enable
+ * @arg @ref I2C_IT_TXI TX interrupt enable
+ *
+ * @retval None
+ */
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief Check whether the specified I2C interrupt source is enabled or not.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __INTERRUPT__ specifies the I2C interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_IT_ERRI Errors interrupt enable
+ * @arg @ref I2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref I2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref I2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref I2C_IT_RXI RX interrupt enable
+ * @arg @ref I2C_IT_TXI TX interrupt enable
+ *
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified I2C flag is set or not.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_FLAG_TXE Transmit data register empty
+ * @arg @ref I2C_FLAG_TXIS Transmit interrupt status
+ * @arg @ref I2C_FLAG_RXNE Receive data register not empty
+ * @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
+ * @arg @ref I2C_FLAG_AF Acknowledge failure received flag
+ * @arg @ref I2C_FLAG_STOPF STOP detection flag
+ * @arg @ref I2C_FLAG_TC Transfer complete (master mode)
+ * @arg @ref I2C_FLAG_TCR Transfer complete reload
+ * @arg @ref I2C_FLAG_BERR Bus error
+ * @arg @ref I2C_FLAG_ARLO Arbitration lost
+ * @arg @ref I2C_FLAG_OVR Overrun/Underrun
+ * @arg @ref I2C_FLAG_PECERR PEC error in reception
+ * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
+ * @arg @ref I2C_FLAG_ALERT SMBus alert
+ * @arg @ref I2C_FLAG_BUSY Bus busy
+ * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode)
+ *
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) ? SET : RESET)
+
+/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg @ref I2C_FLAG_TXE Transmit data register empty
+ * @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
+ * @arg @ref I2C_FLAG_AF Acknowledge failure received flag
+ * @arg @ref I2C_FLAG_STOPF STOP detection flag
+ * @arg @ref I2C_FLAG_BERR Bus error
+ * @arg @ref I2C_FLAG_ARLO Arbitration lost
+ * @arg @ref I2C_FLAG_OVR Overrun/Underrun
+ * @arg @ref I2C_FLAG_PECERR PEC error in reception
+ * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
+ * @arg @ref I2C_FLAG_ALERT SMBus alert
+ *
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \
+ : ((__HANDLE__)->Instance->ICR = (__FLAG__)))
+
+/** @brief Enable the specified I2C peripheral.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
+
+/** @brief Disable the specified I2C peripheral.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
+
+/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
+/**
+ * @}
+ */
+
+/* Include I2C HAL Extended module */
+#include "stm32f7xx_hal_i2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2C_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions******************************/
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* IO operation functions ****************************************************/
+/******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+/******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
+
+/******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
+/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
+void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
+ * @{
+ */
+/* Peripheral State, Mode and Error functions *********************************/
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
+HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Constants I2C Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2C_Private_Macro I2C Private Macros
+ * @{
+ */
+
+#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \
+ ((MODE) == I2C_ADDRESSINGMODE_10BIT))
+
+#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
+ ((ADDRESS) == I2C_DUALADDRESS_ENABLE))
+
+#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \
+ ((MASK) == I2C_OA2_MASK01) || \
+ ((MASK) == I2C_OA2_MASK02) || \
+ ((MASK) == I2C_OA2_MASK03) || \
+ ((MASK) == I2C_OA2_MASK04) || \
+ ((MASK) == I2C_OA2_MASK05) || \
+ ((MASK) == I2C_OA2_MASK06) || \
+ ((MASK) == I2C_OA2_MASK07))
+
+#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
+ ((CALL) == I2C_GENERALCALL_ENABLE))
+
+#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
+ ((STRETCH) == I2C_NOSTRETCH_ENABLE))
+
+#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
+ ((SIZE) == I2C_MEMADD_SIZE_16BIT))
+
+#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \
+ ((MODE) == I2C_AUTOEND_MODE) || \
+ ((MODE) == I2C_SOFTEND_MODE))
+
+#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \
+ ((REQUEST) == I2C_GENERATE_START_READ) || \
+ ((REQUEST) == I2C_GENERATE_START_WRITE) || \
+ ((REQUEST) == I2C_NO_STARTSTOP))
+
+#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \
+ ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \
+ ((REQUEST) == I2C_NEXT_FRAME) || \
+ ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \
+ ((REQUEST) == I2C_LAST_FRAME) || \
+ ((REQUEST) == I2C_LAST_FRAME_NO_STOP))
+
+#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+
+#define I2C_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U)
+#define I2C_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U)
+#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
+#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)
+#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)
+
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU)
+#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU)
+
+#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U)))
+#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
+
+#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+/**
+ * @}
+ */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Functions I2C Private Functions
+ * @{
+ */
+/* Private functions are defined in stm32f7xx_hal_i2c.c file */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h
new file mode 100644
index 00000000..46d6bcbd
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h
@@ -0,0 +1,221 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_i2c_ex.h
+ * @author MCD Application Team
+ * @brief Header file of I2C HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_I2C_EX_H
+#define __STM32F7xx_HAL_I2C_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2CEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter
+ * @{
+ */
+#define I2C_ANALOGFILTER_ENABLE 0x00000000U
+#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF
+/**
+ * @}
+ */
+
+/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus
+ * @{
+ */
+#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */
+#if defined(SYSCFG_PMC_I2C_PB6_FMP)
+#define I2C_FASTMODEPLUS_PB6 SYSCFG_PMC_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */
+#define I2C_FASTMODEPLUS_PB7 SYSCFG_PMC_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */
+#else
+#define I2C_FASTMODEPLUS_PB6 (uint32_t)(0x00000004U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB6 not supported */
+#define I2C_FASTMODEPLUS_PB7 (uint32_t)(0x00000008U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB7 not supported */
+#endif
+#if defined(SYSCFG_PMC_I2C_PB8_FMP)
+#define I2C_FASTMODEPLUS_PB8 SYSCFG_PMC_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */
+#define I2C_FASTMODEPLUS_PB9 SYSCFG_PMC_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */
+#else
+#define I2C_FASTMODEPLUS_PB8 (uint32_t)(0x00000010U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB8 not supported */
+#define I2C_FASTMODEPLUS_PB9 (uint32_t)(0x00000012U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB9 not supported */
+#endif
+#if defined(SYSCFG_PMC_I2C1_FMP)
+#define I2C_FASTMODEPLUS_I2C1 SYSCFG_PMC_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */
+#else
+#define I2C_FASTMODEPLUS_I2C1 (uint32_t)(0x00000100U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C1 not supported */
+#endif
+#if defined(SYSCFG_PMC_I2C2_FMP)
+#define I2C_FASTMODEPLUS_I2C2 SYSCFG_PMC_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */
+#else
+#define I2C_FASTMODEPLUS_I2C2 (uint32_t)(0x00000200U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C2 not supported */
+#endif
+#if defined(SYSCFG_PMC_I2C3_FMP)
+#define I2C_FASTMODEPLUS_I2C3 SYSCFG_PMC_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */
+#else
+#define I2C_FASTMODEPLUS_I2C3 (uint32_t)(0x00000400U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C3 not supported */
+#endif
+#if defined(SYSCFG_PMC_I2C4_FMP)
+#define I2C_FASTMODEPLUS_I2C4 SYSCFG_PMC_I2C4_FMP /*!< Enable Fast Mode Plus on I2C4 pins */
+#else
+#define I2C_FASTMODEPLUS_I2C4 (uint32_t)(0x00000800U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C4 not supported */
+#endif
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup I2CEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ * @{
+ */
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
+#if (defined(SYSCFG_PMC_I2C_PB6_FMP) || defined(SYSCFG_PMC_I2C_PB7_FMP)) || (defined(SYSCFG_PMC_I2C_PB8_FMP) || defined(SYSCFG_PMC_I2C_PB9_FMP)) || (defined(SYSCFG_PMC_I2C1_FMP)) || (defined(SYSCFG_PMC_I2C2_FMP)) || defined(SYSCFG_PMC_I2C3_FMP) || defined(SYSCFG_PMC_I2C4_FMP)
+void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
+void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
+#endif
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros
+ * @{
+ */
+#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \
+ ((FILTER) == I2C_ANALOGFILTER_DISABLE))
+
+#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU)
+
+#if defined(SYSCFG_PMC_I2C1_FMP) && defined(SYSCFG_PMC_I2C2_FMP) && defined(SYSCFG_PMC_I2C3_FMP) && defined(SYSCFG_PMC_I2C4_FMP)
+#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C3) == I2C_FASTMODEPLUS_I2C3) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C4) == I2C_FASTMODEPLUS_I2C4))
+#elif defined(SYSCFG_PMC_I2C1_FMP) && defined(SYSCFG_PMC_I2C2_FMP) && defined(SYSCFG_PMC_I2C3_FMP)
+#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C3) == I2C_FASTMODEPLUS_I2C3))
+#elif defined(SYSCFG_PMC_I2C1_FMP) && defined(SYSCFG_PMC_I2C2_FMP)
+#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2))
+#elif defined(SYSCFG_PMC_I2C1_FMP)
+#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1))
+#endif /* SYSCFG_PMC_I2C1_FMP && SYSCFG_PMC_I2C2_FMP && SYSCFG_PMC_I2C3_FMP && SYSCFG_PMC_I2C4_FMP */
+/**
+ * @}
+ */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions
+ * @{
+ */
+/* Private functions are defined in stm32f7xx_hal_i2c_ex.c file */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_I2C_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h
new file mode 100644
index 00000000..b0e193e4
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h
@@ -0,0 +1,420 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_pwr.h
+ * @author MCD Application Team
+ * @brief Header file of PWR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_PWR_H
+#define __STM32F7xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWR
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Types PWR Exported Types
+ * @{
+ */
+
+/**
+ * @brief PWR PVD configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
+ This parameter can be a value of @ref PWR_PVD_detection_level */
+
+ uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref PWR_PVD_Mode */
+}PWR_PVDTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+ * @{
+ */
+
+/** @defgroup PWR_PVD_detection_level PWR PVD detection level
+ * @{
+ */
+#define PWR_PVDLEVEL_0 PWR_CR1_PLS_LEV0
+#define PWR_PVDLEVEL_1 PWR_CR1_PLS_LEV1
+#define PWR_PVDLEVEL_2 PWR_CR1_PLS_LEV2
+#define PWR_PVDLEVEL_3 PWR_CR1_PLS_LEV3
+#define PWR_PVDLEVEL_4 PWR_CR1_PLS_LEV4
+#define PWR_PVDLEVEL_5 PWR_CR1_PLS_LEV5
+#define PWR_PVDLEVEL_6 PWR_CR1_PLS_LEV6
+#define PWR_PVDLEVEL_7 PWR_CR1_PLS_LEV7/* External input analog voltage
+ (Compare internally to VREFINT) */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_PVD_Mode PWR PVD Mode
+ * @{
+ */
+#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000U) /*!< basic mode is used */
+#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001U) /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002U) /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000U)
+#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPDS
+/**
+ * @}
+ */
+
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+ * @{
+ */
+#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01U)
+#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02U)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+ * @{
+ */
+#define PWR_STOPENTRY_WFI ((uint8_t)0x01U)
+#define PWR_STOPENTRY_WFE ((uint8_t)0x02U)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale
+ * @{
+ */
+#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR1_VOS
+#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR1_VOS_1
+#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR1_VOS_0
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Flag PWR Flag
+ * @{
+ */
+#define PWR_FLAG_WU PWR_CSR1_WUIF
+#define PWR_FLAG_SB PWR_CSR1_SBF
+#define PWR_FLAG_PVDO PWR_CSR1_PVDO
+#define PWR_FLAG_BRR PWR_CSR1_BRR
+#define PWR_FLAG_VOSRDY PWR_CSR1_VOSRDY
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+ * @{
+ */
+
+/** @brief macros configure the main internal regulator output voltage.
+ * @param __REGULATOR__ specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power consumption when the device does
+ * not operate at the maximum frequency (refer to the datasheets for more details).
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
+ * @retval None
+ */
+#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
+ __IO uint32_t tmpreg; \
+ MODIFY_REG(PWR->CR1, PWR_CR1_VOS, (__REGULATOR__)); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(PWR->CR1, PWR_CR1_VOS); \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Check PWR flag is set or not.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
+ * was received on the internal wakeup line in standby mode (RTC alarm (Alarm A or Alarm B),
+ * RTC Tamper event, RTC TimeStamp event or RTC Wakeup)).
+ * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+ * resumed from StandBy mode.
+ * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
+ * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+ * For this reason, this bit is equal to 0 after Standby or reset
+ * until the PVDE bit is set.
+ * @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset
+ * when the device wakes up from Standby mode or by a system reset
+ * or power reset.
+ * @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage
+ * scaling output selection is ready.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the PWR's pending flags.
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_SB: StandBy flag
+ */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR1 |= (__FLAG__) << 2)
+
+/**
+ * @brief Enable the PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable the PVD EXTI Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Enable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Enable the PVD Extended Interrupt Rising Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Disable the PVD Extended Interrupt Rising Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Enable the PVD Extended Interrupt Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+ * @brief Disable the PVD Extended Interrupt Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+ * @brief PVD EXTI line configuration: set rising & falling edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+ * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+ * @brief checks whether the specified PVD Exti interrupt flag is set or not.
+ * @retval EXTI PVD Line Status.
+ */
+#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Clear the PVD Exti flag.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Generates a Software interrupt on PVD EXTI line.
+ * @retval None
+ */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @}
+ */
+
+/* Include PWR HAL Extension module */
+#include "stm32f7xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+/**
+ * @}
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions **********************************************/
+/* PVD configuration */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+
+/* WakeUp pins configuration */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes entry */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+/* Power PVD IRQ Handler */
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+
+/* Cortex System Control functions *******************************************/
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PWR_Private_Constants PWR Private Constants
+ * @{
+ */
+
+/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
+ * @{
+ */
+#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_IM16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWR_Private_Macros PWR Private Macros
+ * @{
+ */
+
+/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
+ * @{
+ */
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+ ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+ ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+ ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+ ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_NORMAL))
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h
new file mode 100644
index 00000000..0c8b81dc
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h
@@ -0,0 +1,278 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_pwr_ex.h
+ * @author MCD Application Team
+ * @brief Header file of PWR HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_PWR_EX_H
+#define __STM32F7xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWREx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+ * @{
+ */
+/** @defgroup PWREx_WakeUp_Pins PWREx Wake Up Pins
+ * @{
+ */
+#define PWR_WAKEUP_PIN1 PWR_CSR2_EWUP1
+#define PWR_WAKEUP_PIN2 PWR_CSR2_EWUP2
+#define PWR_WAKEUP_PIN3 PWR_CSR2_EWUP3
+#define PWR_WAKEUP_PIN4 PWR_CSR2_EWUP4
+#define PWR_WAKEUP_PIN5 PWR_CSR2_EWUP5
+#define PWR_WAKEUP_PIN6 PWR_CSR2_EWUP6
+#define PWR_WAKEUP_PIN1_HIGH PWR_CSR2_EWUP1
+#define PWR_WAKEUP_PIN2_HIGH PWR_CSR2_EWUP2
+#define PWR_WAKEUP_PIN3_HIGH PWR_CSR2_EWUP3
+#define PWR_WAKEUP_PIN4_HIGH PWR_CSR2_EWUP4
+#define PWR_WAKEUP_PIN5_HIGH PWR_CSR2_EWUP5
+#define PWR_WAKEUP_PIN6_HIGH PWR_CSR2_EWUP6
+#define PWR_WAKEUP_PIN1_LOW (uint32_t)((PWR_CR2_WUPP1<<6) | PWR_CSR2_EWUP1)
+#define PWR_WAKEUP_PIN2_LOW (uint32_t)((PWR_CR2_WUPP2<<6) | PWR_CSR2_EWUP2)
+#define PWR_WAKEUP_PIN3_LOW (uint32_t)((PWR_CR2_WUPP3<<6) | PWR_CSR2_EWUP3)
+#define PWR_WAKEUP_PIN4_LOW (uint32_t)((PWR_CR2_WUPP4<<6) | PWR_CSR2_EWUP4)
+#define PWR_WAKEUP_PIN5_LOW (uint32_t)((PWR_CR2_WUPP5<<6) | PWR_CSR2_EWUP5)
+#define PWR_WAKEUP_PIN6_LOW (uint32_t)((PWR_CR2_WUPP6<<6) | PWR_CSR2_EWUP6)
+
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR1_MRUDS
+#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR1_LPDS | PWR_CR1_LPUDS))
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag
+ * @{
+ */
+#define PWR_FLAG_ODRDY PWR_CSR1_ODRDY
+#define PWR_FLAG_ODSWRDY PWR_CSR1_ODSWRDY
+#define PWR_FLAG_UDRDY PWR_CSR1_UDRDY
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_Wakeup_Pins_Flag PWREx Wake Up Pin Flags
+ * @{
+ */
+#define PWR_WAKEUP_PIN_FLAG1 PWR_CSR2_WUPF1
+#define PWR_WAKEUP_PIN_FLAG2 PWR_CSR2_WUPF2
+#define PWR_WAKEUP_PIN_FLAG3 PWR_CSR2_WUPF3
+#define PWR_WAKEUP_PIN_FLAG4 PWR_CSR2_WUPF4
+#define PWR_WAKEUP_PIN_FLAG5 PWR_CSR2_WUPF5
+#define PWR_WAKEUP_PIN_FLAG6 PWR_CSR2_WUPF6
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Macro PWREx Exported Macro
+ * @{
+ */
+/** @brief Macros to enable or disable the Over drive mode.
+ */
+#define __HAL_PWR_OVERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODEN)
+#define __HAL_PWR_OVERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODEN))
+
+/** @brief Macros to enable or disable the Over drive switching.
+ */
+#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODSWEN)
+#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODSWEN))
+
+/** @brief Macros to enable or disable the Under drive mode.
+ * @note This mode is enabled only with STOP low power mode.
+ * In this mode, the 1.2V domain is preserved in reduced leakage mode. This
+ * mode is only available when the main regulator or the low power regulator
+ * is in low voltage mode.
+ * @note If the Under-drive mode was enabled, it is automatically disabled after
+ * exiting Stop mode.
+ * When the voltage regulator operates in Under-drive mode, an additional
+ * startup delay is induced when waking up from Stop mode.
+ */
+#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_UDEN)
+#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_UDEN))
+
+/** @brief Check PWR flag is set or not.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
+ * is ready
+ * @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
+ * switching is ready
+ * @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
+ * is enabled in Stop mode
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the Under-Drive Ready flag.
+ */
+#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR1 |= PWR_FLAG_UDRDY)
+
+/** @brief Check Wake Up flag is set or not.
+ * @param __WUFLAG__ specifies the Wake Up flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0
+ * @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2
+ * @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1
+ * @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13
+ * @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8
+ * @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11
+ */
+#define __HAL_PWR_GET_WAKEUP_FLAG(__WUFLAG__) (PWR->CSR2 & (__WUFLAG__))
+
+/** @brief Clear the WakeUp pins flags.
+ * @param __WUFLAG__ specifies the Wake Up pin flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0
+ * @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2
+ * @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1
+ * @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13
+ * @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8
+ * @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11
+ */
+#define __HAL_PWR_CLEAR_WAKEUP_FLAG(__WUFLAG__) (PWR->CR2 |= (__WUFLAG__))
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWREx_Exported_Functions_Group1
+ * @{
+ */
+uint32_t HAL_PWREx_GetVoltageRange(void);
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
+
+void HAL_PWREx_EnableFlashPowerDown(void);
+void HAL_PWREx_DisableFlashPowerDown(void);
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
+
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
+
+HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWREx_Private_Macros PWREx Private Macros
+ * @{
+ */
+
+/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
+ * @{
+ */
+#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
+#define IS_PWR_WAKEUP_PIN(__PIN__) (((__PIN__) == PWR_WAKEUP_PIN1) || \
+ ((__PIN__) == PWR_WAKEUP_PIN2) || \
+ ((__PIN__) == PWR_WAKEUP_PIN3) || \
+ ((__PIN__) == PWR_WAKEUP_PIN4) || \
+ ((__PIN__) == PWR_WAKEUP_PIN5) || \
+ ((__PIN__) == PWR_WAKEUP_PIN6) || \
+ ((__PIN__) == PWR_WAKEUP_PIN1_HIGH) || \
+ ((__PIN__) == PWR_WAKEUP_PIN2_HIGH) || \
+ ((__PIN__) == PWR_WAKEUP_PIN3_HIGH) || \
+ ((__PIN__) == PWR_WAKEUP_PIN4_HIGH) || \
+ ((__PIN__) == PWR_WAKEUP_PIN5_HIGH) || \
+ ((__PIN__) == PWR_WAKEUP_PIN6_HIGH) || \
+ ((__PIN__) == PWR_WAKEUP_PIN1_LOW) || \
+ ((__PIN__) == PWR_WAKEUP_PIN2_LOW) || \
+ ((__PIN__) == PWR_WAKEUP_PIN3_LOW) || \
+ ((__PIN__) == PWR_WAKEUP_PIN4_LOW) || \
+ ((__PIN__) == PWR_WAKEUP_PIN5_LOW) || \
+ ((__PIN__) == PWR_WAKEUP_PIN6_LOW))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h
new file mode 100644
index 00000000..493258b6
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h
@@ -0,0 +1,1326 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_rcc.h
+ * @author MCD Application Team
+ * @brief Header file of RCC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_RCC_H
+#define __STM32F7xx_HAL_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/* Include RCC HAL Extended module */
+/* (include on top of file since RCC structures are defined in extended file) */
+#include "stm32f7xx_hal_rcc_ex.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Types RCC Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
+ */
+typedef struct
+{
+ uint32_t OscillatorType; /*!< The oscillators to be configured.
+ This parameter can be a value of @ref RCC_Oscillator_Type */
+
+ uint32_t HSEState; /*!< The new state of the HSE.
+ This parameter can be a value of @ref RCC_HSE_Config */
+
+ uint32_t LSEState; /*!< The new state of the LSE.
+ This parameter can be a value of @ref RCC_LSE_Config */
+
+ uint32_t HSIState; /*!< The new state of the HSI.
+ This parameter can be a value of @ref RCC_HSI_Config */
+
+ uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT).
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+
+ uint32_t LSIState; /*!< The new state of the LSI.
+ This parameter can be a value of @ref RCC_LSI_Config */
+
+ RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
+
+}RCC_OscInitTypeDef;
+
+/**
+ * @brief RCC System, AHB and APB busses clock configuration structure definition
+ */
+typedef struct
+{
+ uint32_t ClockType; /*!< The clock to be configured.
+ This parameter can be a value of @ref RCC_System_Clock_Type */
+
+ uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock.
+ This parameter can be a value of @ref RCC_System_Clock_Source */
+
+ uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+ This parameter can be a value of @ref RCC_AHB_Clock_Source */
+
+ uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+ uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+}RCC_ClkInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_Exported_Constants RCC Exported Constants
+ * @{
+ */
+
+/** @defgroup RCC_Oscillator_Type Oscillator Type
+ * @{
+ */
+#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000U)
+#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001U)
+#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002U)
+#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004U)
+#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Config RCC HSE Config
+ * @{
+ */
+#define RCC_HSE_OFF ((uint32_t)0x00000000U)
+#define RCC_HSE_ON RCC_CR_HSEON
+#define RCC_HSE_BYPASS ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Config RCC LSE Config
+ * @{
+ */
+#define RCC_LSE_OFF ((uint32_t)0x00000000U)
+#define RCC_LSE_ON RCC_BDCR_LSEON
+#define RCC_LSE_BYPASS ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSEON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Config RCC HSI Config
+ * @{
+ */
+#define RCC_HSI_OFF ((uint32_t)0x00000000U)
+#define RCC_HSI_ON RCC_CR_HSION
+
+#define RCC_HSICALIBRATION_DEFAULT ((uint32_t)0x10U) /* Default HSI calibration trimming value */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Config RCC LSI Config
+ * @{
+ */
+#define RCC_LSI_OFF ((uint32_t)0x00000000U)
+#define RCC_LSI_ON RCC_CSR_LSION
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Config RCC PLL Config
+ * @{
+ */
+#define RCC_PLL_NONE ((uint32_t)0x00000000U)
+#define RCC_PLL_OFF ((uint32_t)0x00000001U)
+#define RCC_PLL_ON ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider
+ * @{
+ */
+#define RCC_PLLP_DIV2 ((uint32_t)0x00000002U)
+#define RCC_PLLP_DIV4 ((uint32_t)0x00000004U)
+#define RCC_PLLP_DIV6 ((uint32_t)0x00000006U)
+#define RCC_PLLP_DIV8 ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Clock_Source PLL Clock Source
+ * @{
+ */
+#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI
+#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Type RCC System Clock Type
+ * @{
+ */
+#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001U)
+#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002U)
+#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004U)
+#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source RCC System Clock Source
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI
+#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE
+#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL
+/**
+ * @}
+ */
+
+
+/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Clock_Source RCC AHB Clock Source
+ * @{
+ */
+#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1
+#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2
+#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4
+#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8
+#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16
+#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64
+#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128
+#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256
+#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_APB2_Clock_Source RCC APB1/APB2 Clock Source
+ * @{
+ */
+#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1
+#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2
+#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4
+#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8
+#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16
+/**
+ * @}
+ */
+
+/** @defgroup RCC_RTC_Clock_Source RCC RTC Clock Source
+ * @{
+ */
+#define RCC_RTCCLKSOURCE_NO_CLK ((uint32_t)0x00000000U)
+#define RCC_RTCCLKSOURCE_LSE ((uint32_t)0x00000100U)
+#define RCC_RTCCLKSOURCE_LSI ((uint32_t)0x00000200U)
+#define RCC_RTCCLKSOURCE_HSE_DIVX ((uint32_t)0x00000300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV2 ((uint32_t)0x00020300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV3 ((uint32_t)0x00030300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV4 ((uint32_t)0x00040300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV5 ((uint32_t)0x00050300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV6 ((uint32_t)0x00060300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV7 ((uint32_t)0x00070300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV8 ((uint32_t)0x00080300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV9 ((uint32_t)0x00090300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV10 ((uint32_t)0x000A0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV11 ((uint32_t)0x000B0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV12 ((uint32_t)0x000C0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV13 ((uint32_t)0x000D0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV14 ((uint32_t)0x000E0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV15 ((uint32_t)0x000F0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV16 ((uint32_t)0x00100300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV17 ((uint32_t)0x00110300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV18 ((uint32_t)0x00120300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV19 ((uint32_t)0x00130300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV20 ((uint32_t)0x00140300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV21 ((uint32_t)0x00150300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV22 ((uint32_t)0x00160300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV23 ((uint32_t)0x00170300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV24 ((uint32_t)0x00180300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV25 ((uint32_t)0x00190300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV26 ((uint32_t)0x001A0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV27 ((uint32_t)0x001B0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV28 ((uint32_t)0x001C0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV29 ((uint32_t)0x001D0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV30 ((uint32_t)0x001E0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV31 ((uint32_t)0x001F0300U)
+/**
+ * @}
+ */
+
+
+
+/** @defgroup RCC_MCO_Index RCC MCO Index
+ * @{
+ */
+#define RCC_MCO1 ((uint32_t)0x00000000U)
+#define RCC_MCO2 ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO1_Clock_Source RCC MCO1 Clock Source
+ * @{
+ */
+#define RCC_MCO1SOURCE_HSI ((uint32_t)0x00000000U)
+#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO1_0
+#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO1_1
+#define RCC_MCO1SOURCE_PLLCLK RCC_CFGR_MCO1
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO2_Clock_Source RCC MCO2 Clock Source
+ * @{
+ */
+#define RCC_MCO2SOURCE_SYSCLK ((uint32_t)0x00000000U)
+#define RCC_MCO2SOURCE_PLLI2SCLK RCC_CFGR_MCO2_0
+#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1
+#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCOx_Clock_Prescaler RCC MCO1 Clock Prescaler
+ * @{
+ */
+#define RCC_MCODIV_1 ((uint32_t)0x00000000U)
+#define RCC_MCODIV_2 RCC_CFGR_MCO1PRE_2
+#define RCC_MCODIV_3 ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2)
+#define RCC_MCODIV_4 ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2)
+#define RCC_MCODIV_5 RCC_CFGR_MCO1PRE
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Interrupt RCC Interrupt
+ * @{
+ */
+#define RCC_IT_LSIRDY ((uint8_t)0x01U)
+#define RCC_IT_LSERDY ((uint8_t)0x02U)
+#define RCC_IT_HSIRDY ((uint8_t)0x04U)
+#define RCC_IT_HSERDY ((uint8_t)0x08U)
+#define RCC_IT_PLLRDY ((uint8_t)0x10U)
+#define RCC_IT_PLLI2SRDY ((uint8_t)0x20U)
+#define RCC_IT_PLLSAIRDY ((uint8_t)0x40U)
+#define RCC_IT_CSS ((uint8_t)0x80U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flag RCC Flags
+ * Elements values convention: 0XXYYYYYb
+ * - YYYYY : Flag position in the register
+ * - 0XX : Register index
+ * - 01: CR register
+ * - 10: BDCR register
+ * - 11: CSR register
+ * @{
+ */
+/* Flags in the CR register */
+#define RCC_FLAG_HSIRDY ((uint8_t)0x21U)
+#define RCC_FLAG_HSERDY ((uint8_t)0x31U)
+#define RCC_FLAG_PLLRDY ((uint8_t)0x39U)
+#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3BU)
+#define RCC_FLAG_PLLSAIRDY ((uint8_t)0x3CU)
+
+/* Flags in the BDCR register */
+#define RCC_FLAG_LSERDY ((uint8_t)0x41U)
+
+/* Flags in the CSR register */
+#define RCC_FLAG_LSIRDY ((uint8_t)0x61U)
+#define RCC_FLAG_BORRST ((uint8_t)0x79U)
+#define RCC_FLAG_PINRST ((uint8_t)0x7AU)
+#define RCC_FLAG_PORRST ((uint8_t)0x7BU)
+#define RCC_FLAG_SFTRST ((uint8_t)0x7CU)
+#define RCC_FLAG_IWDGRST ((uint8_t)0x7DU)
+#define RCC_FLAG_WWDGRST ((uint8_t)0x7EU)
+#define RCC_FLAG_LPWRRST ((uint8_t)0x7FU)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSEDrive_Configuration RCC LSE Drive configurations
+ * @{
+ */
+#define RCC_LSEDRIVE_LOW ((uint32_t)0x00000000U)
+#define RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_1
+#define RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_0
+#define RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCC_Exported_Macros RCC Exported Macros
+ * @{
+ */
+
+/** @defgroup RCC_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_DMA1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA1EN))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_WWDG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_PWR_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
+#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA1EN)) != RESET)
+
+#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
+#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA1EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET)
+#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET)
+
+#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET)
+#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief EGet the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET)
+#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Peripheral_Clock_Force_Release RCC Peripheral Clock Force Release
+ * @brief Force or release AHB peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+#define __HAL_RCC_DMA1_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST))
+
+#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U)
+#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+#define __HAL_RCC_DMA1_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA1RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
+
+#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00U)
+#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
+
+#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U)
+#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Peripheral_Clock_Sleep_Enable_Disable RCC Peripheral Clock Sleep Enable Disable
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN))
+
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA1LPEN))
+
+/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_WWDGLPEN))
+#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_PWRLPEN))
+
+#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_WWDGLPEN))
+#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_PWRLPEN))
+
+/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SYSCFGLPEN))
+#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SYSCFGLPEN))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB1_Clock_Sleep_Enable_Disable_Status AHB1 Peripheral Clock Sleep Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_CRCLPEN)) != RESET)
+#define __HAL_RCC_DMA1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA1LPEN)) != RESET)
+
+#define __HAL_RCC_CRC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_CRCLPEN)) == RESET)
+#define __HAL_RCC_DMA1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA1LPEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable_Status APB1 Peripheral Clock Sleep Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_WWDG_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_WWDGLPEN)) != RESET)
+#define __HAL_RCC_PWR_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_PWRLPEN)) != RESET)
+
+#define __HAL_RCC_WWDG_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_WWDGLPEN)) == RESET)
+#define __HAL_RCC_PWR_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_PWRLPEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable_Status APB2 Peripheral Clock Sleep Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SYSCFGLPEN)) != RESET)
+#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SYSCFGLPEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Configuration HSI Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
+ * @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
+ * It is used (enabled by hardware) as system clock source after startup
+ * from Reset, wakeup from STOP and STANDBY mode, or in case of failure
+ * of the HSE used directly or indirectly as system clock (if the Clock
+ * Security System CSS is enabled).
+ * @note HSI can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI.
+ * @note After enabling the HSI, the application software should wait on HSIRDY
+ * flag to be set indicating that HSI clock is stable and can be used as
+ * system clock source.
+ * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_HSI_ENABLE() (RCC->CR |= (RCC_CR_HSION))
+#define __HAL_RCC_HSI_DISABLE() (RCC->CR &= ~(RCC_CR_HSION))
+
+/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
+ * @note The calibration is used to compensate for the variations in voltage
+ * and temperature that influence the frequency of the internal HSI RC.
+ * @param __HSICALIBRATIONVALUE__ specifies the calibration trimming value.
+ * (default is RCC_HSICALIBRATION_DEFAULT).
+ */
+#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICALIBRATIONVALUE__) (MODIFY_REG(RCC->CR,\
+ RCC_CR_HSITRIM, (uint32_t)(__HSICALIBRATIONVALUE__) << RCC_CR_HSITRIM_Pos))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Configuration LSI Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI).
+ * @note After enabling the LSI, the application software should wait on
+ * LSIRDY flag to be set indicating that LSI clock is stable and can
+ * be used to clock the IWDG and/or the RTC.
+ * @note LSI can not be disabled if the IWDG is running.
+ * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_LSI_ENABLE() (RCC->CSR |= (RCC_CSR_LSION))
+#define __HAL_RCC_LSI_DISABLE() (RCC->CSR &= ~(RCC_CSR_LSION))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Configuration HSE Configuration
+ * @{
+ */
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE).
+ * @note Transitions HSE Bypass to HSE On and HSE On to HSE Bypass are not
+ * supported by this macro. User should request a transition to HSE Off
+ * first and then HSE On or HSE Bypass.
+ * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
+ * software should wait on HSERDY flag to be set indicating that HSE clock
+ * is stable and can be used to clock the PLL and/or system clock.
+ * @note HSE state can not be changed if it is used directly or through the
+ * PLL as system clock. In this case, you have to select another source
+ * of the system clock then change the HSE state (ex. disable it).
+ * @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
+ * @note This function reset the CSSON bit, so if the clock security system(CSS)
+ * was previously enabled you have to enable it again after calling this
+ * function.
+ * @param __STATE__ specifies the new state of the HSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
+ * 6 HSE oscillator clock cycles.
+ * @arg RCC_HSE_ON: turn ON the HSE oscillator.
+ * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock.
+ */
+#define __HAL_RCC_HSE_CONFIG(__STATE__) \
+ do { \
+ if ((__STATE__) == RCC_HSE_ON) \
+ { \
+ SET_BIT(RCC->CR, RCC_CR_HSEON); \
+ } \
+ else if ((__STATE__) == RCC_HSE_OFF) \
+ { \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \
+ } \
+ else if ((__STATE__) == RCC_HSE_BYPASS) \
+ { \
+ SET_BIT(RCC->CR, RCC_CR_HSEBYP); \
+ SET_BIT(RCC->CR, RCC_CR_HSEON); \
+ } \
+ else \
+ { \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \
+ } \
+ } while(0)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Configuration LSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External Low Speed oscillator (LSE).
+ * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro.
+ * User should request a transition to LSE Off first and then LSE On or LSE Bypass.
+ * @note As the LSE is in the Backup domain and write access is denied to
+ * this domain after reset, you have to enable write access using
+ * HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+ * (to be done once after reset).
+ * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
+ * software should wait on LSERDY flag to be set indicating that LSE clock
+ * is stable and can be used to clock the RTC.
+ * @param __STATE__ specifies the new state of the LSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
+ * 6 LSE oscillator clock cycles.
+ * @arg RCC_LSE_ON: turn ON the LSE oscillator.
+ * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock.
+ */
+#define __HAL_RCC_LSE_CONFIG(__STATE__) \
+ do { \
+ if((__STATE__) == RCC_LSE_ON) \
+ { \
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ } \
+ else if((__STATE__) == RCC_LSE_OFF) \
+ { \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
+ } \
+ else if((__STATE__) == RCC_LSE_BYPASS) \
+ { \
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ } \
+ else \
+ { \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
+ } \
+ } while(0)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Internal_RTC_Clock_Configuration RTC Clock Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the RTC clock.
+ * @note These macros must be used only after the RTC clock source was selected.
+ */
+#define __HAL_RCC_RTC_ENABLE() (RCC->BDCR |= (RCC_BDCR_RTCEN))
+#define __HAL_RCC_RTC_DISABLE() (RCC->BDCR &= ~(RCC_BDCR_RTCEN))
+
+/** @brief Macros to configure the RTC clock (RTCCLK).
+ * @note As the RTC clock configuration bits are in the Backup domain and write
+ * access is denied to this domain after reset, you have to enable write
+ * access using the Power Backup Access macro before to configure
+ * the RTC clock source (to be done once after reset).
+ * @note Once the RTC clock is configured it can't be changed unless the
+ * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by
+ * a Power On Reset (POR).
+ * @param __RTCCLKSource__ specifies the RTC clock source.
+ * This parameter can be one of the following values:
+ @arg @ref RCC_RTCCLKSOURCE_NO_CLK: No clock selected as RTC clock.
+ * @arg @ref RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock.
+ * @arg @ref RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock.
+ * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX: HSE clock divided by x selected
+ * as RTC clock, where x:[2,31]
+ * @note If the LSE or LSI is used as RTC clock source, the RTC continues to
+ * work in STOP and STANDBY modes, and can be used as wakeup source.
+ * However, when the HSE clock is used as RTC clock source, the RTC
+ * cannot be used in STOP and STANDBY modes.
+ * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as
+ * RTC clock source).
+ */
+#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ? \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFF)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)
+
+#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__); \
+ RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFF); \
+ } while (0)
+
+/** @brief Macro to get the RTC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER()
+ */
+#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL))
+
+/**
+ * @brief Get the RTC and HSE clock divider (RTCPRE).
+ * @retval Returned value can be one of the following values:
+ * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX: HSE clock divided by x selected
+ * as RTC clock, where x:[2,31]
+ */
+#define __HAL_RCC_GET_RTC_HSE_PRESCALER() (READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE) | RCC_BDCR_RTCSEL)
+
+/** @brief Macros to force or release the Backup domain reset.
+ * @note This function resets the RTC peripheral (including the backup registers)
+ * and the RTC clock source selection in RCC_CSR register.
+ * @note The BKPSRAM is not affected by this reset.
+ */
+#define __HAL_RCC_BACKUPRESET_FORCE() (RCC->BDCR |= (RCC_BDCR_BDRST))
+#define __HAL_RCC_BACKUPRESET_RELEASE() (RCC->BDCR &= ~(RCC_BDCR_BDRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Configuration PLL Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the main PLL.
+ * @note After enabling the main PLL, the application software should wait on
+ * PLLRDY flag to be set indicating that PLL clock is stable and can
+ * be used as system clock source.
+ * @note The main PLL can not be disabled if it is used as system clock source
+ * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON)
+#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON)
+
+/** @brief Macro to configure the PLL clock source.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __PLLSOURCE__ specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ *
+ */
+#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__))
+
+/** @brief Macro to configure the PLL multiplication factor.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __PLLM__ specifies the division factor for PLL VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLL jitter.
+ *
+ */
+#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, (__PLLM__))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_I2S_Configuration PLL I2S Configuration
+ * @{
+ */
+
+/** @brief Macro to configure the I2S clock source (I2SCLK).
+ * @note This function must be called before enabling the I2S APB clock.
+ * @param __SOURCE__ specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source.
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source.
+ */
+#define __HAL_RCC_I2S_CONFIG(__SOURCE__) do {RCC->CFGR &= ~(RCC_CFGR_I2SSRC); \
+ RCC->CFGR |= (__SOURCE__); \
+ }while(0)
+
+/** @brief Macros to enable or disable the PLLI2S.
+ * @note The PLLI2S is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLLI2S_ENABLE() (RCC->CR |= (RCC_CR_PLLI2SON))
+#define __HAL_RCC_PLLI2S_DISABLE() (RCC->CR &= ~(RCC_CR_PLLI2SON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Get_Clock_source Get Clock source
+ * @{
+ */
+/**
+ * @brief Macro to configure the system clock source.
+ * @param __RCC_SYSCLKSOURCE__ specifies the system clock source.
+ * This parameter can be one of the following values:
+ * - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source.
+ * - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source.
+ * - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source.
+ */
+#define __HAL_RCC_SYSCLK_CONFIG(__RCC_SYSCLKSOURCE__) MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__RCC_SYSCLKSOURCE__))
+
+/** @brief Macro to get the clock source used as system clock.
+ * @retval The clock source used as system clock. The returned value can be one
+ * of the following:
+ * - RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock.
+ * - RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock.
+ * - RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock.
+ */
+#define __HAL_RCC_GET_SYSCLK_SOURCE() (RCC->CFGR & RCC_CFGR_SWS)
+
+/**
+ * @brief Macro to configures the External Low Speed oscillator (LSE) drive capability.
+ * @note As the LSE is in the Backup domain and write access is denied to
+ * this domain after reset, you have to enable write access using
+ * HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+ * (to be done once after reset).
+ * @param __RCC_LSEDRIVE__ specifies the new state of the LSE drive capability.
+ * This parameter can be one of the following values:
+ * @arg RCC_LSEDRIVE_LOW: LSE oscillator low drive capability.
+ * @arg RCC_LSEDRIVE_MEDIUMLOW: LSE oscillator medium low drive capability.
+ * @arg RCC_LSEDRIVE_MEDIUMHIGH: LSE oscillator medium high drive capability.
+ * @arg RCC_LSEDRIVE_HIGH: LSE oscillator high drive capability.
+ * @retval None
+ */
+#define __HAL_RCC_LSEDRIVE_CONFIG(__RCC_LSEDRIVE__) \
+ (MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, (uint32_t)(__RCC_LSEDRIVE__) ))
+
+/** @brief Macro to get the oscillator used as PLL clock source.
+ * @retval The oscillator used as PLL clock source. The returned value can be one
+ * of the following:
+ * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source.
+ * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source.
+ */
+#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the MCO1 clock.
+ * @param __MCOCLKSOURCE__ specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
+ * @param __MCODIV__ specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCODIV_1: no division applied to MCOx clock
+ * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
+ * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
+ * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
+ * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
+ */
+
+#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
+
+/** @brief Macro to configure the MCO2 clock.
+ * @param __MCOCLKSOURCE__ specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
+ * @param __MCODIV__ specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCODIV_1: no division applied to MCOx clock
+ * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
+ * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
+ * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
+ * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
+ */
+
+#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3)));
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management
+ * @brief macros to manage the specified RCC Flags and interrupts.
+ * @{
+ */
+
+/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to enable
+ * the selected interrupts).
+ * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ */
+#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
+
+/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to disable
+ * the selected interrupts).
+ * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ */
+#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__)))
+
+/** @brief Clear the RCC's interrupt pending bits (Perform Byte access to RCC_CIR[23:16]
+ * bits to clear the selected interrupt pending bits.
+ * @param __INTERRUPT__ specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ */
+#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__))
+
+/** @brief Check the RCC's interrupt has occurred or not.
+ * @param __INTERRUPT__ specifies the RCC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_PINRST, RCC_FLAG_PORRST,
+ * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST.
+ */
+#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF)
+
+/** @brief Check RCC flag is set or not.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready.
+ * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready.
+ * @arg RCC_FLAG_PLLRDY: Main PLL clock ready.
+ * @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready.
+ * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready.
+ * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready.
+ * @arg RCC_FLAG_BORRST: POR/PDR or BOR reset.
+ * @arg RCC_FLAG_PINRST: Pin reset.
+ * @arg RCC_FLAG_PORRST: POR/PDR reset.
+ * @arg RCC_FLAG_SFTRST: Software reset.
+ * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset.
+ * @arg RCC_FLAG_WWDGRST: Window Watchdog reset.
+ * @arg RCC_FLAG_LPWRRST: Low Power reset.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define RCC_FLAG_MASK ((uint8_t)0x1F)
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5) == 1)? RCC->CR :((((__FLAG__) >> 5) == 2) ? RCC->BDCR :((((__FLAG__) >> 5) == 3)? RCC->CSR :RCC->CIR))) & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK)))!= 0)? 1 : 0)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Include RCC HAL Extension module */
+#include "stm32f7xx_hal_rcc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+ /** @addtogroup RCC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions ******************************/
+HAL_StatusTypeDef HAL_RCC_DeInit(void);
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
+void HAL_RCC_EnableCSS(void);
+void HAL_RCC_DisableCSS(void);
+uint32_t HAL_RCC_GetSysClockFreq(void);
+uint32_t HAL_RCC_GetHCLKFreq(void);
+uint32_t HAL_RCC_GetPCLK1Freq(void);
+uint32_t HAL_RCC_GetPCLK2Freq(void);
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
+
+/* CSS NMI IRQ handler */
+void HAL_RCC_NMI_IRQHandler(void);
+
+/* User Callbacks in non blocking mode (IT mode) */
+void HAL_RCC_CSSCallback(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RCC_Private_Constants RCC Private Constants
+ * @{
+ */
+#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT
+#define HSI_TIMEOUT_VALUE ((uint32_t)2) /* 2 ms */
+#define LSI_TIMEOUT_VALUE ((uint32_t)2) /* 2 ms */
+#define PLL_TIMEOUT_VALUE ((uint32_t)2) /* 2 ms */
+#define CLOCKSWITCH_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */
+#define PLLI2S_TIMEOUT_VALUE 100U /* Timeout value fixed to 100 ms */
+#define PLLSAI_TIMEOUT_VALUE 100U /* Timeout value fixed to 100 ms */
+
+/** @defgroup RCC_BitAddress_Alias RCC BitAddress Alias
+ * @brief RCC registers bit address alias
+ * @{
+ */
+/* CIR register byte 2 (Bits[15:8]) base address */
+#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x01))
+
+/* CIR register byte 3 (Bits[23:16]) base address */
+#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x02))
+
+#define RCC_DBP_TIMEOUT_VALUE ((uint32_t)100)
+#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup RCC_Private_Macros RCC Private Macros
+ * @{
+ */
+
+/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters
+ * @{
+ */
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) ((OSCILLATOR) <= 15)
+
+#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
+ ((HSE) == RCC_HSE_BYPASS))
+
+#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
+ ((LSE) == RCC_LSE_BYPASS))
+
+#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON))
+
+#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON))
+
+#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON))
+
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSE))
+
+#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK))
+#define IS_RCC_PLLM_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 63))
+
+#define IS_RCC_PLLN_VALUE(VALUE) ((50 <= (VALUE)) && ((VALUE) <= 432))
+
+#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == RCC_PLLP_DIV2) || ((VALUE) == RCC_PLLP_DIV4) || \
+ ((VALUE) == RCC_PLLP_DIV6) || ((VALUE) == RCC_PLLP_DIV8))
+#define IS_RCC_PLLQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
+
+#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_DIV1) || ((HCLK) == RCC_SYSCLK_DIV2) || \
+ ((HCLK) == RCC_SYSCLK_DIV4) || ((HCLK) == RCC_SYSCLK_DIV8) || \
+ ((HCLK) == RCC_SYSCLK_DIV16) || ((HCLK) == RCC_SYSCLK_DIV64) || \
+ ((HCLK) == RCC_SYSCLK_DIV128) || ((HCLK) == RCC_SYSCLK_DIV256) || \
+ ((HCLK) == RCC_SYSCLK_DIV512))
+
+#define IS_RCC_CLOCKTYPE(CLK) ((1 <= (CLK)) && ((CLK) <= 15))
+
+#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_DIV1) || ((PCLK) == RCC_HCLK_DIV2) || \
+ ((PCLK) == RCC_HCLK_DIV4) || ((PCLK) == RCC_HCLK_DIV8) || \
+ ((PCLK) == RCC_HCLK_DIV16))
+
+#define IS_RCC_MCO(MCOX) (((MCOX) == RCC_MCO1) || ((MCOX) == RCC_MCO2))
+
+
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLLCLK))
+
+#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_PLLI2SCLK)|| \
+ ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK))
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \
+ ((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \
+ ((DIV) == RCC_MCODIV_5))
+#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
+
+#define IS_RCC_RTCCLKSOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSOURCE_LSE) || ((SOURCE) == RCC_RTCCLKSOURCE_LSI) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV2) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV3) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV4) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV5) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV6) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV7) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV8) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV9) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV10) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV11) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV12) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV13) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV14) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV15) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV16) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV17) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV18) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV19) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV20) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV21) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV22) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV23) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV24) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV25) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV26) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV27) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV28) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV29) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV30) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV31))
+
+
+#define IS_RCC_LSE_DRIVE(DRIVE) (((DRIVE) == RCC_LSEDRIVE_LOW) || \
+ ((DRIVE) == RCC_LSEDRIVE_MEDIUMLOW) || \
+ ((DRIVE) == RCC_LSEDRIVE_MEDIUMHIGH) || \
+ ((DRIVE) == RCC_LSEDRIVE_HIGH))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h
new file mode 100644
index 00000000..3e76778e
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h
@@ -0,0 +1,3520 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_rcc_ex.h
+ * @author MCD Application Team
+ * @brief Header file of RCC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_RCC_EX_H
+#define __STM32F7xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC PLL configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PLLState; /*!< The new state of the PLL.
+ This parameter can be a value of @ref RCC_PLL_Config */
+
+ uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source.
+ This parameter must be a value of @ref RCC_PLL_Clock_Source */
+
+ uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 63 */
+
+ uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432 */
+
+ uint32_t PLLP; /*!< PLLP: Division factor for main system clock (SYSCLK).
+ This parameter must be a value of @ref RCC_PLLP_Clock_Divider */
+
+ uint32_t PLLQ; /*!< PLLQ: Division factor for OTG FS, SDMMC and RNG clocks.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15 */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ uint32_t PLLR; /*!< PLLR: Division factor for DSI clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7 */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+}RCC_PLLInitTypeDef;
+
+/**
+ * @brief PLLI2S Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || defined (STM32F767xx) || \
+ defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ uint32_t PLLI2SP; /*!< Specifies the division factor for SPDIF-RX clock.
+ This parameter must be a value of @ref RCCEx_PLLI2SP_Clock_Divider.
+ This parameter will be used only when PLLI2S is selected as Clock Source SPDIF-RX */
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+}RCC_PLLI2SInitTypeDef;
+
+/**
+ * @brief PLLSAI Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || defined (STM32F767xx) || \
+ defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ uint32_t PLLSAIR; /*!< specifies the division factor for LTDC clock
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLSAI is selected as Clock Source LTDC */
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+ uint32_t PLLSAIP; /*!< Specifies the division factor for 48MHz clock.
+ This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider
+ This parameter will be used only when PLLSAI is disabled */
+}RCC_PLLSAIInitTypeDef;
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+ uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI */
+
+ uint32_t PLLSAIDivR; /*!< Specifies the PLLSAI division factor for LTDC clock.
+ This parameter must be one value of @ref RCCEx_PLLSAI_DIVR */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock source Selection.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< Specifies I2S Clock source Selection.
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t TIMPresSelection; /*!< Specifies TIM Clock Prescalers Selection.
+ This parameter can be a value of @ref RCCEx_TIM_Prescaler_Selection */
+
+ uint32_t Sai1ClockSelection; /*!< Specifies SAI1 Clock Prescalers Selection
+ This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */
+
+ uint32_t Sai2ClockSelection; /*!< Specifies SAI2 Clock Prescalers Selection
+ This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCCEx_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t Usart6ClockSelection; /*!< USART6 clock source
+ This parameter can be a value of @ref RCCEx_USART6_Clock_Source */
+
+ uint32_t Uart7ClockSelection; /*!< UART7 clock source
+ This parameter can be a value of @ref RCCEx_UART7_Clock_Source */
+
+ uint32_t Uart8ClockSelection; /*!< UART8 clock source
+ This parameter can be a value of @ref RCCEx_UART8_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCCEx_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t I2c4ClockSelection; /*!< I2C4 clock source
+ This parameter can be a value of @ref RCCEx_I2C4_Clock_Source */
+
+ uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 clock source
+ This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+ uint32_t Clk48ClockSelection; /*!< Specifies 48Mhz clock source used by USB OTG FS, RNG and SDMMC
+ This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */
+
+ uint32_t Sdmmc1ClockSelection; /*!< SDMMC1 clock source
+ This parameter can be a value of @ref RCCEx_SDMMC1_Clock_Source */
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ uint32_t Sdmmc2ClockSelection; /*!< SDMMC2 clock source
+ This parameter can be a value of @ref RCCEx_SDMMC2_Clock_Source */
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ uint32_t Dfsdm1ClockSelection; /*!< DFSDM1 clock source
+ This parameter can be a value of @ref RCCEx_DFSDM1_Kernel_Clock_Source */
+
+ uint32_t Dfsdm1AudioClockSelection; /*!< DFSDM1 clock source
+ This parameter can be a value of @ref RCCEx_DFSDM1_AUDIO_Clock_Source */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+}RCC_PeriphCLKInitTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup RCCEx_Periph_Clock_Selection RCC Periph Clock Selection
+ * @{
+ */
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001U)
+#if defined(STM32F746xx) || defined(STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define RCC_PERIPHCLK_LTDC ((uint32_t)0x00000008U)
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010U)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020U)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000040U)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000080U)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000100U)
+#define RCC_PERIPHCLK_UART4 ((uint32_t)0x00000200U)
+#define RCC_PERIPHCLK_UART5 ((uint32_t)0x00000400U)
+#define RCC_PERIPHCLK_USART6 ((uint32_t)0x00000800U)
+#define RCC_PERIPHCLK_UART7 ((uint32_t)0x00001000U)
+#define RCC_PERIPHCLK_UART8 ((uint32_t)0x00002000U)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00004000U)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00008000U)
+#define RCC_PERIPHCLK_I2C3 ((uint32_t)0x00010000U)
+#define RCC_PERIPHCLK_I2C4 ((uint32_t)0x00020000U)
+#define RCC_PERIPHCLK_LPTIM1 ((uint32_t)0x00040000U)
+#define RCC_PERIPHCLK_SAI1 ((uint32_t)0x00080000U)
+#define RCC_PERIPHCLK_SAI2 ((uint32_t)0x00100000U)
+#define RCC_PERIPHCLK_CLK48 ((uint32_t)0x00200000U)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00400000U)
+#define RCC_PERIPHCLK_SDMMC1 ((uint32_t)0x00800000U)
+#define RCC_PERIPHCLK_SPDIFRX ((uint32_t)0x01000000U)
+#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x02000000U)
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define RCC_PERIPHCLK_SDMMC2 ((uint32_t)0x04000000U)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define RCC_PERIPHCLK_DFSDM1 ((uint32_t)0x08000000U)
+#define RCC_PERIPHCLK_DFSDM1_AUDIO ((uint32_t)0x10000000U)
+#endif /* STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @}
+ */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || defined (STM32F767xx) || \
+ defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/** @defgroup RCCEx_PLLI2SP_Clock_Divider RCCEx PLLI2SP Clock Divider
+ * @{
+ */
+#define RCC_PLLI2SP_DIV2 ((uint32_t)0x00000000U)
+#define RCC_PLLI2SP_DIV4 ((uint32_t)0x00000001U)
+#define RCC_PLLI2SP_DIV6 ((uint32_t)0x00000002U)
+#define RCC_PLLI2SP_DIV8 ((uint32_t)0x00000003U)
+/**
+ * @}
+ */
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @defgroup RCCEx_PLLSAIP_Clock_Divider RCCEx PLLSAIP Clock Divider
+ * @{
+ */
+#define RCC_PLLSAIP_DIV2 ((uint32_t)0x00000000U)
+#define RCC_PLLSAIP_DIV4 ((uint32_t)0x00000001U)
+#define RCC_PLLSAIP_DIV6 ((uint32_t)0x00000002U)
+#define RCC_PLLSAIP_DIV8 ((uint32_t)0x00000003U)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLSAI_DIVR RCCEx PLLSAI DIVR
+ * @{
+ */
+#define RCC_PLLSAIDIVR_2 ((uint32_t)0x00000000U)
+#define RCC_PLLSAIDIVR_4 RCC_DCKCFGR1_PLLSAIDIVR_0
+#define RCC_PLLSAIDIVR_8 RCC_DCKCFGR1_PLLSAIDIVR_1
+#define RCC_PLLSAIDIVR_16 RCC_DCKCFGR1_PLLSAIDIVR
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2S_Clock_Source RCCEx I2S Clock Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_PLLI2S ((uint32_t)0x00000000U)
+#define RCC_I2SCLKSOURCE_EXT RCC_CFGR_I2SSRC
+
+/**
+ * @}
+ */
+
+
+/** @defgroup RCCEx_SAI1_Clock_Source RCCEx SAI1 Clock Source
+ * @{
+ */
+#define RCC_SAI1CLKSOURCE_PLLSAI ((uint32_t)0x00000000U)
+#define RCC_SAI1CLKSOURCE_PLLI2S RCC_DCKCFGR1_SAI1SEL_0
+#define RCC_SAI1CLKSOURCE_PIN RCC_DCKCFGR1_SAI1SEL_1
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define RCC_SAI1CLKSOURCE_PLLSRC RCC_DCKCFGR1_SAI1SEL
+#endif /* STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SAI2_Clock_Source RCCEx SAI2 Clock Source
+ * @{
+ */
+#define RCC_SAI2CLKSOURCE_PLLSAI ((uint32_t)0x00000000U)
+#define RCC_SAI2CLKSOURCE_PLLI2S RCC_DCKCFGR1_SAI2SEL_0
+#define RCC_SAI2CLKSOURCE_PIN RCC_DCKCFGR1_SAI2SEL_1
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define RCC_SAI2CLKSOURCE_PLLSRC RCC_DCKCFGR1_SAI2SEL
+#endif /* STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CEC_Clock_Source RCCEx CEC Clock Source
+ * @{
+ */
+#define RCC_CECCLKSOURCE_LSE ((uint32_t)0x00000000U)
+#define RCC_CECCLKSOURCE_HSI RCC_DCKCFGR2_CECSEL /* CEC clock is HSI/488*/
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_USART1_Clock_Source RCCEx USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 ((uint32_t)0x00000000U)
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_DCKCFGR2_USART1SEL_0
+#define RCC_USART1CLKSOURCE_HSI RCC_DCKCFGR2_USART1SEL_1
+#define RCC_USART1CLKSOURCE_LSE RCC_DCKCFGR2_USART1SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_USART2_Clock_Source RCCEx USART2 Clock Source
+ * @{
+ */
+#define RCC_USART2CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_USART2CLKSOURCE_SYSCLK RCC_DCKCFGR2_USART2SEL_0
+#define RCC_USART2CLKSOURCE_HSI RCC_DCKCFGR2_USART2SEL_1
+#define RCC_USART2CLKSOURCE_LSE RCC_DCKCFGR2_USART2SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_USART3_Clock_Source RCCEx USART3 Clock Source
+ * @{
+ */
+#define RCC_USART3CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_USART3CLKSOURCE_SYSCLK RCC_DCKCFGR2_USART3SEL_0
+#define RCC_USART3CLKSOURCE_HSI RCC_DCKCFGR2_USART3SEL_1
+#define RCC_USART3CLKSOURCE_LSE RCC_DCKCFGR2_USART3SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART4_Clock_Source RCCEx UART4 Clock Source
+ * @{
+ */
+#define RCC_UART4CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_UART4CLKSOURCE_SYSCLK RCC_DCKCFGR2_UART4SEL_0
+#define RCC_UART4CLKSOURCE_HSI RCC_DCKCFGR2_UART4SEL_1
+#define RCC_UART4CLKSOURCE_LSE RCC_DCKCFGR2_UART4SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART5_Clock_Source RCCEx UART5 Clock Source
+ * @{
+ */
+#define RCC_UART5CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_UART5CLKSOURCE_SYSCLK RCC_DCKCFGR2_UART5SEL_0
+#define RCC_UART5CLKSOURCE_HSI RCC_DCKCFGR2_UART5SEL_1
+#define RCC_UART5CLKSOURCE_LSE RCC_DCKCFGR2_UART5SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_USART6_Clock_Source RCCEx USART6 Clock Source
+ * @{
+ */
+#define RCC_USART6CLKSOURCE_PCLK2 ((uint32_t)0x00000000U)
+#define RCC_USART6CLKSOURCE_SYSCLK RCC_DCKCFGR2_USART6SEL_0
+#define RCC_USART6CLKSOURCE_HSI RCC_DCKCFGR2_USART6SEL_1
+#define RCC_USART6CLKSOURCE_LSE RCC_DCKCFGR2_USART6SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART7_Clock_Source RCCEx UART7 Clock Source
+ * @{
+ */
+#define RCC_UART7CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_UART7CLKSOURCE_SYSCLK RCC_DCKCFGR2_UART7SEL_0
+#define RCC_UART7CLKSOURCE_HSI RCC_DCKCFGR2_UART7SEL_1
+#define RCC_UART7CLKSOURCE_LSE RCC_DCKCFGR2_UART7SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART8_Clock_Source RCCEx UART8 Clock Source
+ * @{
+ */
+#define RCC_UART8CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_UART8CLKSOURCE_SYSCLK RCC_DCKCFGR2_UART8SEL_0
+#define RCC_UART8CLKSOURCE_HSI RCC_DCKCFGR2_UART8SEL_1
+#define RCC_UART8CLKSOURCE_LSE RCC_DCKCFGR2_UART8SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C1_Clock_Source RCCEx I2C1 Clock Source
+ * @{
+ */
+#define RCC_I2C1CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_I2C1CLKSOURCE_SYSCLK RCC_DCKCFGR2_I2C1SEL_0
+#define RCC_I2C1CLKSOURCE_HSI RCC_DCKCFGR2_I2C1SEL_1
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source RCCEx I2C2 Clock Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_DCKCFGR2_I2C2SEL_0
+#define RCC_I2C2CLKSOURCE_HSI RCC_DCKCFGR2_I2C2SEL_1
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C3_Clock_Source RCCEx I2C3 Clock Source
+ * @{
+ */
+#define RCC_I2C3CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_I2C3CLKSOURCE_SYSCLK RCC_DCKCFGR2_I2C3SEL_0
+#define RCC_I2C3CLKSOURCE_HSI RCC_DCKCFGR2_I2C3SEL_1
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C4_Clock_Source RCCEx I2C4 Clock Source
+ * @{
+ */
+#define RCC_I2C4CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_I2C4CLKSOURCE_SYSCLK RCC_DCKCFGR2_I2C4SEL_0
+#define RCC_I2C4CLKSOURCE_HSI RCC_DCKCFGR2_I2C4SEL_1
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_LPTIM1_Clock_Source RCCEx LPTIM1 Clock Source
+ * @{
+ */
+#define RCC_LPTIM1CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_LPTIM1CLKSOURCE_LSI RCC_DCKCFGR2_LPTIM1SEL_0
+#define RCC_LPTIM1CLKSOURCE_HSI RCC_DCKCFGR2_LPTIM1SEL_1
+#define RCC_LPTIM1CLKSOURCE_LSE RCC_DCKCFGR2_LPTIM1SEL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CLK48_Clock_Source RCCEx CLK48 Clock Source
+ * @{
+ */
+#define RCC_CLK48SOURCE_PLL ((uint32_t)0x00000000U)
+#define RCC_CLK48SOURCE_PLLSAIP RCC_DCKCFGR2_CK48MSEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM_Prescaler_Selection RCCEx TIM Prescaler Selection
+ * @{
+ */
+#define RCC_TIMPRES_DESACTIVATED ((uint32_t)0x00000000U)
+#define RCC_TIMPRES_ACTIVATED RCC_DCKCFGR1_TIMPRE
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SDMMC1_Clock_Source RCCEx SDMMC1 Clock Source
+ * @{
+ */
+#define RCC_SDMMC1CLKSOURCE_CLK48 ((uint32_t)0x00000000U)
+#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_DCKCFGR2_SDMMC1SEL
+/**
+ * @}
+ */
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/** @defgroup RCCEx_SDMMC2_Clock_Source RCCEx SDMMC2 Clock Source
+ * @{
+ */
+#define RCC_SDMMC2CLKSOURCE_CLK48 ((uint32_t)0x00000000U)
+#define RCC_SDMMC2CLKSOURCE_SYSCLK RCC_DCKCFGR2_SDMMC2SEL
+/**
+ * @}
+ */
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/** @defgroup RCCEx_DFSDM1_Kernel_Clock_Source RCCEx DFSDM1 Kernel Clock Source
+ * @{
+ */
+#define RCC_DFSDM1CLKSOURCE_PCLK2 ((uint32_t)0x00000000U)
+#define RCC_DFSDM1CLKSOURCE_SYSCLK RCC_DCKCFGR1_DFSDM1SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_DFSDM1_AUDIO_Clock_Source RCCEx DFSDM1 AUDIO Clock Source
+ * @{
+ */
+#define RCC_DFSDM1AUDIOCLKSOURCE_SAI1 ((uint32_t)0x00000000U)
+#define RCC_DFSDM1AUDIOCLKSOURCE_SAI2 RCC_DCKCFGR1_ADFSDM1SEL
+/**
+ * @}
+ */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F769xx) || defined (STM32F779xx)
+/** @defgroup RCCEx_DSI_Clock_Source RCC DSI Clock Source
+ * @{
+ */
+#define RCC_DSICLKSOURCE_DSIPHY ((uint32_t)0x00000000U)
+#define RCC_DSICLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR2_DSISEL)
+/**
+ * @}
+ */
+#endif /* STM32F769xx || STM32F779xx */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
+ * @{
+ */
+/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable RCCEx_Peripheral_Clock_Enable_Disable
+ * @brief Enables or disables the AHB/APB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+
+/** @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_DTCMRAMEN_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DTCMRAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DTCMRAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_DMA2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_GPIOJ_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOK_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_DMA2D_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
+#define __HAL_RCC_DTCMRAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DTCMRAMEN))
+#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2EN))
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
+#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOAEN))
+#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOBEN))
+#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN))
+#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN))
+#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_GPIOJ_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOJEN))
+#define __HAL_RCC_GPIOK_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOKEN))
+#define __HAL_RCC_DMA2D_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2DEN))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/**
+ * @brief Enable ETHERNET clock.
+ */
+#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_ETH_CLK_ENABLE() do { \
+ __HAL_RCC_ETHMAC_CLK_ENABLE(); \
+ __HAL_RCC_ETHMACTX_CLK_ENABLE(); \
+ __HAL_RCC_ETHMACRX_CLK_ENABLE(); \
+ } while(0)
+/**
+ * @brief Disable ETHERNET clock.
+ */
+#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
+#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
+#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
+#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
+#define __HAL_RCC_ETH_CLK_DISABLE() do { \
+ __HAL_RCC_ETHMACTX_CLK_DISABLE(); \
+ __HAL_RCC_ETHMACRX_CLK_DISABLE(); \
+ __HAL_RCC_ETHMAC_CLK_DISABLE(); \
+ } while(0)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DCMI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_JPEG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_JPEGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_JPEGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_JPEG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_JPEGEN))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_RNG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN);\
+ UNUSED(tmpreg); \
+ __HAL_RCC_SYSCFG_CLK_ENABLE();\
+ } while(0)
+
+#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
+
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
+#if defined(STM32F756xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CRYP_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_HASH_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
+#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
+#endif /* STM32F756x || STM32F777xx || STM32F779xx */
+
+#if defined(STM32F732xx) || defined (STM32F733xx)
+#define __HAL_RCC_AES_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_AES_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_AESEN))
+#endif /* STM32F732xx || STM32F733xx */
+
+/** @brief Enables or disables the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_FMC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_QSPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN))
+#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN))
+
+/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
+ defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
+ defined (STM32F779xx)
+#define __HAL_RCC_RTC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
+ STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_USART2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_UART4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_UART5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_I2C1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_DAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_UART7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_UART8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SPDIFRX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_I2C4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_CEC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_LPTIM1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_LPTIM1EN))
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
+ defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
+ defined (STM32F779xx)
+#define __HAL_RCC_RTC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_RTCEN))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
+ STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN3EN))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
+#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+#define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN))
+#define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN))
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SPDIFRX_CLK_DISABLE()(RCC->APB1ENR &= ~(RCC_APB1ENR_SPDIFRXEN))
+#define __HAL_RCC_I2C4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C4EN))
+#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_TIM1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_USART1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_USART6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SDMMC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_ADC1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_ADC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_ADC3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SDMMC1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SPI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM9_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM11_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SPI5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SPI6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SAI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SAI2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F769xx) || defined (STM32F779xx)
+#define __HAL_RCC_DSI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F769xx || STM32F779xx */
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DFSDM1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_MDIO_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_MDIOEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_MDIOEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F723xx) || defined (STM32F733xx)
+#define __HAL_RCC_OTGPHYC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_OTGPHYCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_OTGPHYCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F723xx || STM32F733xx */
+
+#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
+#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
+#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SDMMC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDMMC2EN))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
+#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+#define __HAL_RCC_SDMMC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDMMC1EN))
+#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN))
+#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN))
+#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
+#define __HAL_RCC_SPI6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI6EN))
+#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN))
+#define __HAL_RCC_SAI2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI2EN))
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_LTDCEN))
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F769xx) || defined (STM32F779xx)
+#define __HAL_RCC_DSI_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DSIEN))
+#endif /* STM32F769xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DFSDM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DFSDM1EN))
+#define __HAL_RCC_MDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_MDIOEN))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F723xx) || defined (STM32F733xx)
+#define __HAL_RCC_OTGPHYC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_OTGPHYCEN))
+#endif /* STM32F723xx || STM32F733xx */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable_Status Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB/APB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+
+/** @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET)
+#define __HAL_RCC_DTCMRAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DTCMRAMEN)) != RESET)
+#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2EN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET)
+#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOAEN)) != RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOBEN)) != RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOCEN)) != RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOHEN)) != RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) != RESET)
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_GPIOJ_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) != RESET)
+#define __HAL_RCC_GPIOK_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) != RESET)
+#define __HAL_RCC_DMA2D_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) != RESET)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET)
+#define __HAL_RCC_DTCMRAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DTCMRAMEN)) == RESET)
+#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2EN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) == RESET)
+#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOAEN)) == RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOBEN)) == RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOCEN)) == RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOHEN)) == RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) == RESET)
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_GPIOJ_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) == RESET)
+#define __HAL_RCC_GPIOK_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) == RESET)
+#define __HAL_RCC_DMA2D_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) == RESET)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/**
+ * @brief Enable ETHERNET clock.
+ */
+#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) != RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) != RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) != RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) != RESET)
+#define __HAL_RCC_ETH_IS_CLK_ENABLED() (__HAL_RCC_ETHMAC_IS_CLK_ENABLED() && \
+ __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \
+ __HAL_RCC_ETHMACRX_IS_CLK_ENABLED())
+
+/**
+ * @brief Disable ETHERNET clock.
+ */
+#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) == RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) == RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) == RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) == RESET)
+#define __HAL_RCC_ETH_IS_CLK_DISABLED() (__HAL_RCC_ETHMAC_IS_CLK_DISABLED() && \
+ __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \
+ __HAL_RCC_ETHMACRX_IS_CLK_DISABLED())
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Get the enable or disable status of the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
+
+#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET)
+#define __HAL_RCC_USB_IS_OTG_FS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
+
+#if defined(STM32F756xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) != RESET)
+#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) != RESET)
+#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) == RESET)
+#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) == RESET)
+#endif /* STM32F756xx || STM32F777xx || STM32F779xx */
+
+#if defined(STM32F732xx) || defined (STM32F733xx)
+#define __HAL_RCC_AES_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_AESEN)) != RESET)
+#define __HAL_RCC_AES_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_AESEN)) == RESET)
+#endif /* STM32F732xx || STM32F733xx */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET)
+#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_JPEG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_JPEGEN)) != RESET)
+#define __HAL_RCC_JPEG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_JPEGEN)) == RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Get the enable or disable status of the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) != RESET)
+#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET)
+
+#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) == RESET)
+#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET)
+
+/** @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
+#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
+#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
+#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) != RESET)
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN3EN)) != RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET)
+#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
+#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET)
+#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET)
+#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET)
+#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
+#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET)
+#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
+#define __HAL_RCC_UART7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) != RESET)
+#define __HAL_RCC_UART8_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
+#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
+#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
+#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) == RESET)
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN3EN)) == RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET)
+#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
+#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET)
+#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET)
+#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET)
+#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
+#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
+#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
+#define __HAL_RCC_UART7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) == RESET)
+#define __HAL_RCC_UART8_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) == RESET)
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SPDIFRX_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) != RESET)
+#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET)
+#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET)
+#define __HAL_RCC_I2C4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C4EN)) != RESET)
+
+#define __HAL_RCC_SPDIFRX_IS_CLK_DISABLED()((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) == RESET)
+#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET)
+#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET)
+#define __HAL_RCC_I2C4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C4EN)) == RESET)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
+ defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
+ defined (STM32F779xx)
+#define __HAL_RCC_RTC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCEN)) != RESET)
+#define __HAL_RCC_RTC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCEN)) == RESET)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
+ STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET)
+#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
+#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET)
+#define __HAL_RCC_USART6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) != RESET)
+#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET)
+#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET)
+#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET)
+#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDMMC1EN)) != RESET)
+#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET)
+#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
+#define __HAL_RCC_TIM9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) != RESET)
+#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET)
+#define __HAL_RCC_TIM11_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) != RESET)
+#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET)
+#define __HAL_RCC_SPI6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) != RESET)
+#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET)
+#define __HAL_RCC_SAI2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) != RESET)
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) != RESET)
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F769xx) || defined (STM32F779xx)
+#define __HAL_RCC_DSI_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) != RESET)
+#endif /* STM32F769xx || STM32F779xx */
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SDMMC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDMMC2EN)) != RESET)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DFSDM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) != RESET)
+#define __HAL_RCC_MDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_MDIOEN)) != RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F723xx) || defined (STM32F733xx)
+#define __HAL_RCC_OTGPHYC_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_OTGPHYCEN)) != RESET)
+#endif /* STM32F723xx || STM32F733xx */
+
+#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET)
+#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
+#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET)
+#define __HAL_RCC_USART6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) == RESET)
+#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET)
+#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET)
+#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET)
+#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDMMC1EN)) == RESET)
+#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET)
+#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
+#define __HAL_RCC_TIM9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) == RESET)
+#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
+#define __HAL_RCC_TIM11_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) == RESET)
+#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET)
+#define __HAL_RCC_SPI6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) == RESET)
+#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET)
+#define __HAL_RCC_SAI2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) == RESET)
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) == RESET)
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F769xx) || defined (STM32F779xx)
+#define __HAL_RCC_DSI_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) == RESET)
+#endif /* STM32F769xx || STM32F779xx */
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SDMMC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDMMC2EN)) == RESET)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DFSDM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) == RESET)
+#define __HAL_RCC_MDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_MDIOEN)) == RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F723xx) || defined (STM32F733xx)
+#define __HAL_RCC_OTGPHYC_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_OTGPHYCEN)) == RESET)
+#endif /* STM32F723xx || STM32F733xx */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Force_Release_Peripheral_Reset RCCEx Force Release Peripheral Reset
+ * @brief Forces or releases AHB/APB peripheral reset.
+ * @{
+ */
+
+/** @brief Force or release AHB1 peripheral reset.
+ */
+#define __HAL_RCC_DMA2_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST))
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOCRST))
+#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOHRST))
+#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
+
+#define __HAL_RCC_DMA2_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2RST))
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOCRST))
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOHRST))
+#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DMA2D_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2DRST))
+#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_GPIOJ_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOJRST))
+#define __HAL_RCC_GPIOK_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOKRST))
+
+#define __HAL_RCC_DMA2D_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2DRST))
+#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_GPIOJ_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOJRST))
+#define __HAL_RCC_GPIOK_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOKRST))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Force or release AHB2 peripheral reset.
+ */
+#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
+
+#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
+#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
+
+#if defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_JPEG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_JPEGRST))
+#define __HAL_RCC_JPEG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_JPEGRST))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined(STM32F756xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
+#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
+#endif /* STM32F756xx || STM32F777xx || STM32F779xx */
+
+#if defined(STM32F732xx) || defined (STM32F733xx)
+#define __HAL_RCC_AES_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_AESRST))
+#define __HAL_RCC_AES_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_AESRST))
+#endif /* STM32F732xx || STM32F733xx */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
+#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Force or release AHB3 peripheral reset
+ */
+#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST))
+#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST))
+
+#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
+#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST))
+#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST))
+
+/** @brief Force or release APB1 peripheral reset.
+ */
+#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_LPTIM1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_LPTIM1RST))
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN3RST))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST))
+#define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST))
+
+#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_LPTIM1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_LPTIM1RST))
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN3RST))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST))
+#define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST))
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SPDIFRX_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPDIFRXRST))
+#define __HAL_RCC_I2C4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C4RST))
+#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
+
+#define __HAL_RCC_SPDIFRX_RELEASE_RESET()(RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPDIFRXRST))
+#define __HAL_RCC_I2C4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C4RST))
+#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
+#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
+#define __HAL_RCC_ADC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADCRST))
+#define __HAL_RCC_SDMMC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDMMC1RST))
+#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST))
+#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST))
+#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SPI6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI6RST))
+#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST))
+#define __HAL_RCC_SAI2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI2RST))
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_LTDCRST))
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F723xx) || defined (STM32F733xx)
+#define __HAL_RCC_OTGPHYC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_OTGPHYCRST))
+#endif /* STM32F723xx || STM32F733xx */
+
+#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
+#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
+#define __HAL_RCC_ADC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADCRST))
+#define __HAL_RCC_SDMMC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDMMC1RST))
+#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST))
+#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST))
+#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SPI6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI6RST))
+#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST))
+#define __HAL_RCC_SAI2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI2RST))
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_LTDCRST))
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F723xx) || defined (STM32F733xx)
+#define __HAL_RCC_OTGPHYC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_OTGPHYCRST))
+#endif /* STM32F723xx || STM32F733xx */
+
+#if defined (STM32F769xx) || defined (STM32F779xx)
+#define __HAL_RCC_DSI_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DSIRST))
+#define __HAL_RCC_DSI_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DSIRST))
+#endif /* STM32F769xx || STM32F779xx */
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SDMMC2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDMMC2RST))
+#define __HAL_RCC_SDMMC2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDMMC2RST))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DFSDM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DFSDM1RST))
+#define __HAL_RCC_MDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_MDIORST))
+#define __HAL_RCC_DFSDM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DFSDM1RST))
+#define __HAL_RCC_MDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_MDIORST))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Peripheral_Clock_Sleep_Enable_Disable RCCEx Peripheral Clock Sleep Enable Disable
+ * @brief Enables or disables the AHB/APB peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+
+/** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ */
+#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_AXI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_AXILPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
+#define __HAL_RCC_DTCM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DTCMLPEN))
+#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOALPEN))
+#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOBLPEN))
+#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOCLPEN))
+#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOHLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
+
+#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_AXI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_AXILPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
+#define __HAL_RCC_DTCM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DTCMLPEN))
+#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2LPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOALPEN))
+#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOBLPEN))
+#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOCLPEN))
+#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOHLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2DLPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOJLPEN))
+#define __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOKLPEN))
+
+#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2DLPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOJLPEN))
+#define __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOKLPEN))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
+#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_JPEGLPEN))
+#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_JPEGLPEN))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
+#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
+
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
+
+#if defined(STM32F756xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
+
+#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
+#endif /* STM32F756xx || STM32F777xx || STM32F779xx */
+
+#if defined(STM32F732xx) || defined (STM32F733xx)
+#define __HAL_RCC_AES_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_AESLPEN))
+#define __HAL_RCC_AES_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_AESLPEN))
+#endif /* STM32F732xx || STM32F733xx */
+
+/** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN))
+#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN))
+
+#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN))
+#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN))
+
+/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM5LPEN))
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_LPTIM1LPEN))
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN3LPEN))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI2LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART2LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C1LPEN))
+#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C2LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN))
+#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM5LPEN))
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_LPTIM1LPEN))
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN3LPEN))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI2LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART2LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C1LPEN))
+#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C2LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN))
+#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN))
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
+ defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
+ defined (STM32F779xx)
+#define __HAL_RCC_RTC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_RTCLPEN))
+#define __HAL_RCC_RTC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_RTCLPEN))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
+ STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SPDIFRX_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPDIFRXLPEN))
+#define __HAL_RCC_I2C4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C4LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CECLPEN))
+
+#define __HAL_RCC_SPDIFRX_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPDIFRXLPEN))
+#define __HAL_RCC_I2C4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C4LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CECLPEN))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM1LPEN))
+#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART1LPEN))
+#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART6LPEN))
+#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC1LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDMMC1LPEN))
+#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI1LPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM9LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_TIM11_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM11LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN))
+#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI2LPEN))
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_LTDCLPEN))
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM1LPEN))
+#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART1LPEN))
+#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART6LPEN))
+#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC1LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDMMC1LPEN))
+#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI1LPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM9LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_TIM11_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM11LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN))
+#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI2LPEN))
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_LTDCLPEN))
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F769xx) || defined (STM32F779xx)
+#define __HAL_RCC_DSI_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DSILPEN))
+#define __HAL_RCC_DSI_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DSILPEN))
+#endif /* STM32F769xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DFSDM1LPEN))
+#define __HAL_RCC_MDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_MDIOLPEN))
+#define __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DFSDM1LPEN))
+#define __HAL_RCC_MDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_MDIOLPEN))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SDMMC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDMMC2LPEN))
+#define __HAL_RCC_SDMMC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDMMC2LPEN))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI6LPEN))
+#define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI6LPEN))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Clock_Sleep_Enable_Disable_Status AHB/APB Peripheral Clock Sleep Enable Disable Status
+ * @brief Get the enable or disable status of the AHB/APB peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+
+/** @brief Get the enable or disable status of the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_FLITF_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_FLITFLPEN)) != RESET)
+#define __HAL_RCC_AXI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_AXILPEN)) != RESET)
+#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM1LPEN)) != RESET)
+#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM2LPEN)) != RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_BKPSRAMLPEN)) != RESET)
+#define __HAL_RCC_DTCM_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DTCMLPEN)) != RESET)
+#define __HAL_RCC_DMA2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2LPEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSLPEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSULPILPEN)) != RESET)
+#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOALPEN)) != RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOBLPEN)) != RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOCLPEN)) != RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIODLPEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOELPEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOFLPEN)) != RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOGLPEN)) != RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOHLPEN)) != RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOILPEN)) != RESET)
+
+#define __HAL_RCC_FLITF_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_FLITFLPEN)) == RESET)
+#define __HAL_RCC_AXI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_AXILPEN)) == RESET)
+#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM1LPEN)) == RESET)
+#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM2LPEN)) == RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_BKPSRAMLPEN)) == RESET)
+#define __HAL_RCC_DTCM_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DTCMLPEN)) == RESET)
+#define __HAL_RCC_DMA2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2LPEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSLPEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSULPILPEN)) == RESET)
+#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOALPEN)) == RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOBLPEN)) == RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOCLPEN)) == RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIODLPEN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOELPEN)) == RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOFLPEN)) == RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOGLPEN)) == RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOHLPEN)) == RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOILPEN)) == RESET)
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2DLPEN)) != RESET)
+#define __HAL_RCC_ETHMAC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACLPEN)) != RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACTXLPEN)) != RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACRXLPEN)) != RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACPTPLPEN)) != RESET)
+#define __HAL_RCC_GPIOJ_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOJLPEN)) != RESET)
+#define __HAL_RCC_GPIOK_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOKLPEN)) != RESET)
+
+#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2DLPEN)) == RESET)
+#define __HAL_RCC_ETHMAC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACLPEN)) == RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACTXLPEN)) == RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACRXLPEN)) == RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACPTPLPEN)) == RESET)
+#define __HAL_RCC_GPIOJ_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOJLPEN)) == RESET)
+#define __HAL_RCC_GPIOK_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOKLPEN)) == RESET)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Get the enable or disable status of the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DCMI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DCMILPEN)) != RESET)
+#define __HAL_RCC_DCMI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DCMILPEN)) == RESET)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined(STM32F767xx) || defined(STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_JPEG_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_JPEGLPEN)) != RESET)
+#define __HAL_RCC_JPEG_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_JPEGLPEN)) == RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_RNGLPEN)) != RESET)
+#define __HAL_RCC_RNG_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_RNGLPEN)) == RESET)
+
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_OTGFSLPEN)) != RESET)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_OTGFSLPEN)) == RESET)
+
+#if defined(STM32F756xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CRYP_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_CRYPLPEN)) != RESET)
+#define __HAL_RCC_HASH_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_HASHLPEN)) != RESET)
+
+#define __HAL_RCC_CRYP_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_CRYPLPEN)) == RESET)
+#define __HAL_RCC_HASH_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_HASHLPEN)) == RESET)
+#endif /* STM32F756xx || STM32F777xx || STM32F779xx */
+
+#if defined(STM32F732xx) || defined (STM32F733xx)
+#define __HAL_RCC_AES_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_AESLPEN)) != RESET)
+#define __HAL_RCC_AES_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_AESLPEN)) == RESET)
+#endif /* STM32F732xx || STM32F733xx */
+
+/** @brief Get the enable or disable status of the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_FMC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & (RCC_AHB3LPENR_FMCLPEN)) != RESET)
+#define __HAL_RCC_FMC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & (RCC_AHB3LPENR_FMCLPEN)) == RESET)
+
+#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & (RCC_AHB3LPENR_QSPILPEN)) != RESET)
+#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & (RCC_AHB3LPENR_QSPILPEN)) == RESET)
+
+/** @brief Get the enable or disable status of the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM2LPEN)) != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM3LPEN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM4LPEN)) != RESET)
+#define __HAL_RCC_TIM5_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM5LPEN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM6LPEN)) != RESET)
+#define __HAL_RCC_TIM7_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM7LPEN)) != RESET)
+#define __HAL_RCC_TIM12_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM12LPEN)) != RESET)
+#define __HAL_RCC_TIM13_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM13LPEN)) != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM14LPEN)) != RESET)
+#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_LPTIM1LPEN)) != RESET)
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
+ defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
+ defined (STM32F779xx)
+#define __HAL_RCC_RTC_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_RTCLPEN)) != RESET)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
+ STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN3LPEN)) != RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI2LPEN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI3LPEN)) != RESET)
+#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART2LPEN)) != RESET)
+#define __HAL_RCC_USART3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART3LPEN)) != RESET)
+#define __HAL_RCC_UART4_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART4LPEN)) != RESET)
+#define __HAL_RCC_UART5_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART5LPEN)) != RESET)
+#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C1LPEN)) != RESET)
+#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C2LPEN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C3LPEN)) != RESET)
+#define __HAL_RCC_CAN1_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN1LPEN)) != RESET)
+#define __HAL_RCC_DAC_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_DACLPEN)) != RESET)
+#define __HAL_RCC_UART7_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART7LPEN)) != RESET)
+#define __HAL_RCC_UART8_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART8LPEN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM2LPEN)) == RESET)
+#define __HAL_RCC_TIM3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM3LPEN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM4LPEN)) == RESET)
+#define __HAL_RCC_TIM5_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM5LPEN)) == RESET)
+#define __HAL_RCC_TIM6_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM6LPEN)) == RESET)
+#define __HAL_RCC_TIM7_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM7LPEN)) == RESET)
+#define __HAL_RCC_TIM12_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM12LPEN)) == RESET)
+#define __HAL_RCC_TIM13_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM13LPEN)) == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM14LPEN)) == RESET)
+#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_LPTIM1LPEN)) == RESET)
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
+ defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
+ defined (STM32F779xx)
+#define __HAL_RCC_RTC_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_RTCLPEN)) == RESET)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
+ STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN3LPEN)) == RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_SPI2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI2LPEN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI3LPEN)) == RESET)
+#define __HAL_RCC_USART2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART2LPEN)) == RESET)
+#define __HAL_RCC_USART3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART3LPEN)) == RESET)
+#define __HAL_RCC_UART4_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART4LPEN)) == RESET)
+#define __HAL_RCC_UART5_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART5LPEN)) == RESET)
+#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C1LPEN)) == RESET)
+#define __HAL_RCC_I2C2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C2LPEN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C3LPEN)) == RESET)
+#define __HAL_RCC_CAN1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN1LPEN)) == RESET)
+#define __HAL_RCC_DAC_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_DACLPEN)) == RESET)
+#define __HAL_RCC_UART7_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART7LPEN)) == RESET)
+#define __HAL_RCC_UART8_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART8LPEN)) == RESET)
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SPDIFRX_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPDIFRXLPEN)) != RESET)
+#define __HAL_RCC_I2C4_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C4LPEN)) != RESET)
+#define __HAL_RCC_CAN2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN2LPEN)) != RESET)
+#define __HAL_RCC_CEC_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CECLPEN)) != RESET)
+
+#define __HAL_RCC_SPDIFRX_IS_CLK_SLEEP_DISABLED()((RCC->APB1LPENR & (RCC_APB1LPENR_SPDIFRXLPEN)) == RESET)
+#define __HAL_RCC_I2C4_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C4LPEN)) == RESET)
+#define __HAL_RCC_CAN2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN2LPEN)) == RESET)
+#define __HAL_RCC_CEC_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CECLPEN)) == RESET)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Get the enable or disable status of the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM1LPEN)) != RESET)
+#define __HAL_RCC_TIM8_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM8LPEN)) != RESET)
+#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART1LPEN)) != RESET)
+#define __HAL_RCC_USART6_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART6LPEN)) != RESET)
+#define __HAL_RCC_ADC1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC1LPEN)) != RESET)
+#define __HAL_RCC_ADC2_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC2LPEN)) != RESET)
+#define __HAL_RCC_ADC3_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC3LPEN)) != RESET)
+#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SDMMC1LPEN)) != RESET)
+#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI1LPEN)) != RESET)
+#define __HAL_RCC_SPI4_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI4LPEN)) != RESET)
+#define __HAL_RCC_TIM9_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM9LPEN)) != RESET)
+#define __HAL_RCC_TIM10_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM10LPEN)) != RESET)
+#define __HAL_RCC_TIM11_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM11LPEN)) != RESET)
+#define __HAL_RCC_SPI5_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI5LPEN)) != RESET)
+#define __HAL_RCC_SAI1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI1LPEN)) != RESET)
+#define __HAL_RCC_SAI2_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI2LPEN)) != RESET)
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_LTDCLPEN)) != RESET)
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F769xx) || defined (STM32F779xx)
+#define __HAL_RCC_DSI_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_DSILPEN)) != RESET)
+#endif /* STM32F769xx || STM32F779xx */
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SDMMC2_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SDMMC2LPEN)) != RESET)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_DFSDM1LPEN)) != RESET)
+#define __HAL_RCC_MDIO_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_MDIOLPEN)) != RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_TIM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM1LPEN)) == RESET)
+#define __HAL_RCC_TIM8_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM8LPEN)) == RESET)
+#define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART1LPEN)) == RESET)
+#define __HAL_RCC_USART6_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART6LPEN)) == RESET)
+#define __HAL_RCC_ADC1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC1LPEN)) == RESET)
+#define __HAL_RCC_ADC2_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC2LPEN)) == RESET)
+#define __HAL_RCC_ADC3_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC3LPEN)) == RESET)
+#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SDMMC1LPEN)) == RESET)
+#define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI1LPEN)) == RESET)
+#define __HAL_RCC_SPI4_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI4LPEN)) == RESET)
+#define __HAL_RCC_TIM9_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM9LPEN)) == RESET)
+#define __HAL_RCC_TIM10_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM10LPEN)) == RESET)
+#define __HAL_RCC_TIM11_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM11LPEN)) == RESET)
+#define __HAL_RCC_SPI5_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI5LPEN)) == RESET)
+#define __HAL_RCC_SAI1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI1LPEN)) == RESET)
+#define __HAL_RCC_SAI2_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI2LPEN)) == RESET)
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_LTDCLPEN)) == RESET)
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F769xx) || defined (STM32F779xx)
+#define __HAL_RCC_DSI_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_DSILPEN)) == RESET)
+#endif /* STM32F769xx || STM32F779xx */
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SDMMC2_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SDMMC2LPEN)) == RESET)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_DFSDM1LPEN)) == RESET)
+#define __HAL_RCC_MDIO_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_MDIOLPEN)) == RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SPI6_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI6LPEN)) != RESET)
+#define __HAL_RCC_SPI6_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI6LPEN)) == RESET)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/*------------------------------- PLL Configuration --------------------------*/
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/** @brief Macro to configure the main PLL clock source, multiplication and division factors.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __RCC_PLLSource__ specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S.
+ * @param __PLLM__ specifies the division factor for PLL VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLL jitter.
+ * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLN parameter correctly to ensure that the VCO
+ * output frequency is between 100 and 432 MHz.
+ * @param __PLLP__ specifies the division factor for main system clock (SYSCLK)
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ * @note You have to set the PLLP parameter correctly to not exceed 216 MHz on
+ * the System clock frequency.
+ * @param __PLLQ__ specifies the division factor for OTG FS, SDMMC and RNG clocks
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @note If the USB OTG FS is used in your application, you have to set the
+ * PLLQ parameter correctly to have 48 MHz clock for the USB. However,
+ * the SDMMC and RNG need a frequency lower than or equal to 48 MHz to work
+ * correctly.
+ * @param __PLLR__ specifies the division factor for DSI clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__) \
+ (RCC->PLLCFGR = ((__RCC_PLLSource__) | (__PLLM__) | \
+ ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \
+ ((((__PLLP__) >> 1) -1) << RCC_PLLCFGR_PLLP_Pos) | \
+ ((__PLLQ__) << RCC_PLLCFGR_PLLQ_Pos) | \
+ ((__PLLR__) << RCC_PLLCFGR_PLLR_Pos)))
+#else
+/** @brief Macro to configure the main PLL clock source, multiplication and division factors.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __RCC_PLLSource__ specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S.
+ * @param __PLLM__ specifies the division factor for PLL VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLL jitter.
+ * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLN parameter correctly to ensure that the VCO
+ * output frequency is between 100 and 432 MHz.
+ * @param __PLLP__ specifies the division factor for main system clock (SYSCLK)
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ * @note You have to set the PLLP parameter correctly to not exceed 216 MHz on
+ * the System clock frequency.
+ * @param __PLLQ__ specifies the division factor for OTG FS, SDMMC and RNG clocks
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @note If the USB OTG FS is used in your application, you have to set the
+ * PLLQ parameter correctly to have 48 MHz clock for the USB. However,
+ * the SDMMC and RNG need a frequency lower than or equal to 48 MHz to work
+ * correctly.
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__) \
+ (RCC->PLLCFGR = (0x20000000 | (__RCC_PLLSource__) | (__PLLM__)| \
+ ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \
+ ((((__PLLP__) >> 1) -1) << RCC_PLLCFGR_PLLP_Pos) | \
+ ((__PLLQ__) << RCC_PLLCFGR_PLLQ_Pos)))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/*---------------------------------------------------------------------------------------------*/
+
+/** @brief Macro to configure the Timers clocks prescalers
+ * @param __PRESC__ specifies the Timers clocks prescalers selection
+ * This parameter can be one of the following values:
+ * @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is
+ * equal to HPRE if PPREx is corresponding to division by 1 or 2,
+ * else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to
+ * division by 4 or more.
+ * @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is
+ * equal to HPRE if PPREx is corresponding to division by 1, 2 or 4,
+ * else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding
+ * to division by 8 or more.
+ */
+#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) do {RCC->DCKCFGR1 &= ~(RCC_DCKCFGR1_TIMPRE);\
+ RCC->DCKCFGR1 |= (__PRESC__); \
+ }while(0)
+
+/** @brief Macros to Enable or Disable the PLLISAI.
+ * @note The PLLSAI is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLLSAI_ENABLE() (RCC->CR |= (RCC_CR_PLLSAION))
+#define __HAL_RCC_PLLSAI_DISABLE() (RCC->CR &= ~(RCC_CR_PLLSAION))
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx)
+/** @brief Macro to configure the PLLSAI clock multiplication and division factors.
+ * @note This function must be used only when the PLLSAI is disabled.
+ * @note PLLSAI clock source is common with the main PLL (configured in
+ * RCC_PLLConfig function )
+ * @param __PLLSAIN__ specifies the multiplication factor for PLLSAI VCO output clock.
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ * @param __PLLSAIP__ specifies the division factor for USB, RNG, SDMMC clocks
+ * This parameter can be a value of @ref RCCEx_PLLSAIP_Clock_Divider.
+ * @param __PLLSAIQ__ specifies the division factor for SAI clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ */
+#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIP__, __PLLSAIQ__) \
+ (RCC->PLLSAICFGR = ((__PLLSAIN__) << RCC_PLLSAICFGR_PLLSAIN_Pos) |\
+ ((__PLLSAIP__) << RCC_PLLSAICFGR_PLLSAIP_Pos) |\
+ ((__PLLSAIQ__) << RCC_PLLSAICFGR_PLLSAIQ_Pos))
+
+/** @brief Macro to configure the PLLI2S clock multiplication and division factors.
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API)
+ * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock.
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ * @param __PLLI2SQ__ specifies the division factor for SAI clock.
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @param __PLLI2SR__ specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ */
+#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) \
+ (RCC->PLLI2SCFGR = ((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\
+ ((__PLLI2SQ__) << RCC_PLLI2SCFGR_PLLI2SQ_Pos) |\
+ ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))
+#else
+/** @brief Macro to configure the PLLSAI clock multiplication and division factors.
+ * @note This function must be used only when the PLLSAI is disabled.
+ * @note PLLSAI clock source is common with the main PLL (configured in
+ * RCC_PLLConfig function )
+ * @param __PLLSAIN__ specifies the multiplication factor for PLLSAI VCO output clock.
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ * @param __PLLSAIP__ specifies the division factor for USB, RNG, SDMMC clocks
+ * This parameter can be a value of @ref RCCEx_PLLSAIP_Clock_Divider.
+ * @param __PLLSAIQ__ specifies the division factor for SAI clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @param __PLLSAIR__ specifies the division factor for LTDC clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ */
+#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) \
+ (RCC->PLLSAICFGR = ((__PLLSAIN__) << RCC_PLLSAICFGR_PLLSAIN_Pos) |\
+ ((__PLLSAIP__) << RCC_PLLSAICFGR_PLLSAIP_Pos) |\
+ ((__PLLSAIQ__) << RCC_PLLSAICFGR_PLLSAIQ_Pos) |\
+ ((__PLLSAIR__) << RCC_PLLSAICFGR_PLLSAIR_Pos))
+
+/** @brief Macro to configure the PLLI2S clock multiplication and division factors.
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API)
+ * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock.
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ * @param __PLLI2SP__ specifies the division factor for SPDDIF-RX clock.
+ * This parameter can be a value of @ref RCCEx_PLLI2SP_Clock_Divider.
+ * @param __PLLI2SQ__ specifies the division factor for SAI clock.
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @param __PLLI2SR__ specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ */
+#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SP__, __PLLI2SQ__, __PLLI2SR__) \
+ (RCC->PLLI2SCFGR = ((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\
+ ((__PLLI2SP__) << RCC_PLLI2SCFGR_PLLI2SP_Pos) |\
+ ((__PLLI2SQ__) << RCC_PLLI2SCFGR_PLLI2SQ_Pos) |\
+ ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx */
+
+/** @brief Macro to configure the SAI clock Divider coming from PLLI2S.
+ * @note This function must be called before enabling the PLLI2S.
+ * @param __PLLI2SDivQ__ specifies the PLLI2S division factor for SAI1 clock .
+ * This parameter must be a number between 1 and 32.
+ * SAI1 clock frequency = f(PLLI2SQ) / __PLLI2SDivQ__
+ */
+#define __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(__PLLI2SDivQ__) (MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLI2SDIVQ, (__PLLI2SDivQ__)-1))
+
+/** @brief Macro to configure the SAI clock Divider coming from PLLSAI.
+ * @note This function must be called before enabling the PLLSAI.
+ * @param __PLLSAIDivQ__ specifies the PLLSAI division factor for SAI1 clock .
+ * This parameter must be a number between Min_Data = 1 and Max_Data = 32.
+ * SAI1 clock frequency = f(PLLSAIQ) / __PLLSAIDivQ__
+ */
+#define __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(__PLLSAIDivQ__) (MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLSAIDIVQ, ((__PLLSAIDivQ__)-1)<<8))
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/** @brief Macro to configure the LTDC clock Divider coming from PLLSAI.
+ * @note This function must be called before enabling the PLLSAI.
+ * @param __PLLSAIDivR__ specifies the PLLSAI division factor for LTDC clock .
+ * This parameter can be a value of @ref RCCEx_PLLSAI_DIVR.
+ * LTDC clock frequency = f(PLLSAIR) / __PLLSAIDivR__
+ */
+#define __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(__PLLSAIDivR__)\
+ MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLSAIDIVR, (uint32_t)(__PLLSAIDivR__))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Macro to configure SAI1 clock source selection.
+ * @note This function must be called before enabling PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__ specifies the SAI1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+ * as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+ * as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin
+ * used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock
+ * used as SAI1 clock.
+ * @note The RCC_SAI1CLKSOURCE_PLLSRC value is only available with STM32F767/769/777/779xx Devices
+ */
+#define __HAL_RCC_SAI1_CONFIG(__SOURCE__)\
+ MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI1SEL, (uint32_t)(__SOURCE__))
+
+/** @brief Macro to get the SAI1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+ * as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+ * as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin
+ * used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock
+ * used as SAI1 clock.
+ * @note The RCC_SAI1CLKSOURCE_PLLSRC value is only available with STM32F767/769/777/779xx Devices
+ */
+#define __HAL_RCC_GET_SAI1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI1SEL)))
+
+
+/** @brief Macro to configure SAI2 clock source selection.
+ * @note This function must be called before enabling PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__ specifies the SAI2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+ * as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+ * as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin
+ * used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock
+ * used as SAI2 clock.
+ * @note The RCC_SAI2CLKSOURCE_PLLSRC value is only available with STM32F767/769/777/779xx Devices
+ */
+#define __HAL_RCC_SAI2_CONFIG(__SOURCE__)\
+ MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI2SEL, (uint32_t)(__SOURCE__))
+
+
+/** @brief Macro to get the SAI2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+ * as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+ * as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin
+ * used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock
+ * used as SAI2 clock.
+ * @note The RCC_SAI2CLKSOURCE_PLLSRC value is only available with STM32F767/769/777/779xx Devices
+ */
+#define __HAL_RCC_GET_SAI2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI2SEL)))
+
+
+/** @brief Enable PLLSAI_RDY interrupt.
+ */
+#define __HAL_RCC_PLLSAI_ENABLE_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Disable PLLSAI_RDY interrupt.
+ */
+#define __HAL_RCC_PLLSAI_DISABLE_IT() (RCC->CIR &= ~(RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Clear the PLLSAI RDY interrupt pending bits.
+ */
+#define __HAL_RCC_PLLSAI_CLEAR_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYF))
+
+/** @brief Check the PLLSAI RDY interrupt has occurred or not.
+ * @retval The new state (TRUE or FALSE).
+ */
+#define __HAL_RCC_PLLSAI_GET_IT() ((RCC->CIR & (RCC_CIR_PLLSAIRDYIE)) == (RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Check PLLSAI RDY flag is set or not.
+ * @retval The new state (TRUE or FALSE).
+ */
+#define __HAL_RCC_PLLSAI_GET_FLAG() ((RCC->CR & (RCC_CR_PLLSAIRDY)) == (RCC_CR_PLLSAIRDY))
+
+/** @brief Macro to Get I2S clock source selection.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S clock source
+ */
+#define __HAL_RCC_GET_I2SCLKSOURCE() (READ_BIT(RCC->CFGR, RCC_CFGR_I2SSRC))
+
+/** @brief Macro to configure the I2C1 clock (I2C1CLK).
+ *
+ * @param __I2C1_CLKSOURCE__ specifies the I2C1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C1CLKSOURCE_PCLK1: PCLK1 selected as I2C1 clock
+ * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
+ * @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_I2C1_CONFIG(__I2C1_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C1SEL, (uint32_t)(__I2C1_CLKSOURCE__))
+
+/** @brief Macro to get the I2C1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C1CLKSOURCE_PCLK1: PCLK1 selected as I2C1 clock
+ * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
+ * @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C1SEL)))
+
+/** @brief Macro to configure the I2C2 clock (I2C2CLK).
+ *
+ * @param __I2C2_CLKSOURCE__ specifies the I2C2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_PCLK1: PCLK1 selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_I2C2_CONFIG(__I2C2_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C2SEL, (uint32_t)(__I2C2_CLKSOURCE__))
+
+/** @brief Macro to get the I2C2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_PCLK1: PCLK1 selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C2SEL)))
+
+/** @brief Macro to configure the I2C3 clock (I2C3CLK).
+ *
+ * @param __I2C3_CLKSOURCE__ specifies the I2C3 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C3CLKSOURCE_PCLK1: PCLK1 selected as I2C3 clock
+ * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock
+ * @arg RCC_I2C3CLKSOURCE_SYSCLK: System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_I2C3_CONFIG(__I2C3_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C3SEL, (uint32_t)(__I2C3_CLKSOURCE__))
+
+/** @brief macro to get the I2C3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C3CLKSOURCE_PCLK1: PCLK1 selected as I2C3 clock
+ * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock
+ * @arg RCC_I2C3CLKSOURCE_SYSCLK: System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_GET_I2C3_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C3SEL)))
+
+/** @brief Macro to configure the I2C4 clock (I2C4CLK).
+ *
+ * @param __I2C4_CLKSOURCE__ specifies the I2C4 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C4CLKSOURCE_PCLK1: PCLK1 selected as I2C4 clock
+ * @arg RCC_I2C4CLKSOURCE_HSI: HSI selected as I2C4 clock
+ * @arg RCC_I2C4CLKSOURCE_SYSCLK: System Clock selected as I2C4 clock
+ */
+#define __HAL_RCC_I2C4_CONFIG(__I2C4_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C4SEL, (uint32_t)(__I2C4_CLKSOURCE__))
+
+/** @brief macro to get the I2C4 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C4CLKSOURCE_PCLK1: PCLK1 selected as I2C4 clock
+ * @arg RCC_I2C4CLKSOURCE_HSI: HSI selected as I2C4 clock
+ * @arg RCC_I2C4CLKSOURCE_SYSCLK: System Clock selected as I2C4 clock
+ */
+#define __HAL_RCC_GET_I2C4_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C4SEL)))
+
+/** @brief Macro to configure the USART1 clock (USART1CLK).
+ *
+ * @param __USART1_CLKSOURCE__ specifies the USART1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART1CLKSOURCE_PCLK2: PCLK2 selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
+ */
+#define __HAL_RCC_USART1_CONFIG(__USART1_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART1SEL, (uint32_t)(__USART1_CLKSOURCE__))
+
+/** @brief macro to get the USART1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART1CLKSOURCE_PCLK2: PCLK2 selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
+ */
+#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART1SEL)))
+
+/** @brief Macro to configure the USART2 clock (USART2CLK).
+ *
+ * @param __USART2_CLKSOURCE__ specifies the USART2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+ */
+#define __HAL_RCC_USART2_CONFIG(__USART2_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART2SEL, (uint32_t)(__USART2_CLKSOURCE__))
+
+/** @brief macro to get the USART2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+ */
+#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART2SEL)))
+
+/** @brief Macro to configure the USART3 clock (USART3CLK).
+ *
+ * @param __USART3_CLKSOURCE__ specifies the USART3 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART3CLKSOURCE_PCLK1: PCLK1 selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_SYSCLK: System Clock selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock
+ */
+#define __HAL_RCC_USART3_CONFIG(__USART3_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART3SEL, (uint32_t)(__USART3_CLKSOURCE__))
+
+/** @brief macro to get the USART3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART3CLKSOURCE_PCLK1: PCLK1 selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_SYSCLK: System Clock selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock
+ */
+#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART3SEL)))
+
+ /** @brief Macro to configure the UART4 clock (UART4CLK).
+ *
+ * @param __UART4_CLKSOURCE__ specifies the UART4 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_UART4CLKSOURCE_PCLK1: PCLK1 selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_SYSCLK: System Clock selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock
+ */
+#define __HAL_RCC_UART4_CONFIG(__UART4_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART4SEL, (uint32_t)(__UART4_CLKSOURCE__))
+
+/** @brief macro to get the UART4 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_UART4CLKSOURCE_PCLK1: PCLK1 selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_SYSCLK: System Clock selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock
+ */
+#define __HAL_RCC_GET_UART4_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART4SEL)))
+
+ /** @brief Macro to configure the UART5 clock (UART5CLK).
+ *
+ * @param __UART5_CLKSOURCE__ specifies the UART5 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_UART5CLKSOURCE_PCLK1: PCLK1 selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_SYSCLK: System Clock selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock
+ */
+#define __HAL_RCC_UART5_CONFIG(__UART5_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART5SEL, (uint32_t)(__UART5_CLKSOURCE__))
+
+/** @brief macro to get the UART5 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_UART5CLKSOURCE_PCLK1: PCLK1 selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_SYSCLK: System Clock selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock
+ */
+#define __HAL_RCC_GET_UART5_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART5SEL)))
+
+ /** @brief Macro to configure the USART6 clock (USART6CLK).
+ *
+ * @param __USART6_CLKSOURCE__ specifies the USART6 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART6CLKSOURCE_PCLK1: PCLK1 selected as USART6 clock
+ * @arg RCC_USART6CLKSOURCE_HSI: HSI selected as USART6 clock
+ * @arg RCC_USART6CLKSOURCE_SYSCLK: System Clock selected as USART6 clock
+ * @arg RCC_USART6CLKSOURCE_LSE: LSE selected as USART6 clock
+ */
+#define __HAL_RCC_USART6_CONFIG(__USART6_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART6SEL, (uint32_t)(__USART6_CLKSOURCE__))
+
+/** @brief macro to get the USART6 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART6CLKSOURCE_PCLK1: PCLK1 selected as USART6 clock
+ * @arg RCC_USART6CLKSOURCE_HSI: HSI selected as USART6 clock
+ * @arg RCC_USART6CLKSOURCE_SYSCLK: System Clock selected as USART6 clock
+ * @arg RCC_USART6CLKSOURCE_LSE: LSE selected as USART6 clock
+ */
+#define __HAL_RCC_GET_USART6_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART6SEL)))
+
+ /** @brief Macro to configure the UART7 clock (UART7CLK).
+ *
+ * @param __UART7_CLKSOURCE__ specifies the UART7 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_UART7CLKSOURCE_PCLK1: PCLK1 selected as UART7 clock
+ * @arg RCC_UART7CLKSOURCE_HSI: HSI selected as UART7 clock
+ * @arg RCC_UART7CLKSOURCE_SYSCLK: System Clock selected as UART7 clock
+ * @arg RCC_UART7CLKSOURCE_LSE: LSE selected as UART7 clock
+ */
+#define __HAL_RCC_UART7_CONFIG(__UART7_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART7SEL, (uint32_t)(__UART7_CLKSOURCE__))
+
+/** @brief macro to get the UART7 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_UART7CLKSOURCE_PCLK1: PCLK1 selected as UART7 clock
+ * @arg RCC_UART7CLKSOURCE_HSI: HSI selected as UART7 clock
+ * @arg RCC_UART7CLKSOURCE_SYSCLK: System Clock selected as UART7 clock
+ * @arg RCC_UART7CLKSOURCE_LSE: LSE selected as UART7 clock
+ */
+#define __HAL_RCC_GET_UART7_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART7SEL)))
+
+/** @brief Macro to configure the UART8 clock (UART8CLK).
+ *
+ * @param __UART8_CLKSOURCE__ specifies the UART8 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_UART8CLKSOURCE_PCLK1: PCLK1 selected as UART8 clock
+ * @arg RCC_UART8CLKSOURCE_HSI: HSI selected as UART8 clock
+ * @arg RCC_UART8CLKSOURCE_SYSCLK: System Clock selected as UART8 clock
+ * @arg RCC_UART8CLKSOURCE_LSE: LSE selected as UART8 clock
+ */
+#define __HAL_RCC_UART8_CONFIG(__UART8_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART8SEL, (uint32_t)(__UART8_CLKSOURCE__))
+
+/** @brief macro to get the UART8 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_UART8CLKSOURCE_PCLK1: PCLK1 selected as UART8 clock
+ * @arg RCC_UART8CLKSOURCE_HSI: HSI selected as UART8 clock
+ * @arg RCC_UART8CLKSOURCE_SYSCLK: System Clock selected as UART8 clock
+ * @arg RCC_UART8CLKSOURCE_LSE: LSE selected as UART8 clock
+ */
+#define __HAL_RCC_GET_UART8_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART8SEL)))
+
+/** @brief Macro to configure the LPTIM1 clock (LPTIM1CLK).
+ *
+ * @param __LPTIM1_CLKSOURCE__ specifies the LPTIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock
+ */
+#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, (uint32_t)(__LPTIM1_CLKSOURCE__))
+
+/** @brief macro to get the LPTIM1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock
+ */
+#define __HAL_RCC_GET_LPTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL)))
+
+/** @brief Macro to configure the CEC clock (CECCLK).
+ *
+ * @param __CEC_CLKSOURCE__ specifies the CEC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_HSI: HSI divided by 488 selected as CEC clock
+ */
+#define __HAL_RCC_CEC_CONFIG(__CEC_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, (uint32_t)(__CEC_CLKSOURCE__))
+
+/** @brief macro to get the CEC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
+ */
+#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL)))
+
+/** @brief Macro to configure the CLK48 source (CLK48CLK).
+ *
+ * @param __CLK48_SOURCE__ specifies the CLK48 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CLK48SOURCE_PLL: PLL selected as CLK48 source
+ * @arg RCC_CLK48SOURCE_PLLSAIP: PLLSAIP selected as CLK48 source
+ */
+#define __HAL_RCC_CLK48_CONFIG(__CLK48_SOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__CLK48_SOURCE__))
+
+/** @brief macro to get the CLK48 source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_CLK48SOURCE_PLL: PLL used as CLK48 source
+ * @arg RCC_CLK48SOURCE_PLLSAIP: PLLSAIP used as CLK48 source
+ */
+#define __HAL_RCC_GET_CLK48_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL)))
+
+/** @brief Macro to configure the SDMMC1 clock (SDMMC1CLK).
+ *
+ * @param __SDMMC1_CLKSOURCE__ specifies the SDMMC1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SDMMC1CLKSOURCE_CLK48: CLK48 selected as SDMMC clock
+ * @arg RCC_SDMMC1CLKSOURCE_SYSCLK: SYSCLK selected as SDMMC clock
+ */
+#define __HAL_RCC_SDMMC1_CONFIG(__SDMMC1_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDMMC1SEL, (uint32_t)(__SDMMC1_CLKSOURCE__))
+
+/** @brief macro to get the SDMMC1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SDMMC1CLKSOURCE_CLK48: CLK48 selected as SDMMC1 clock
+ * @arg RCC_SDMMC1CLKSOURCE_SYSCLK: SYSCLK selected as SDMMC1 clock
+ */
+#define __HAL_RCC_GET_SDMMC1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDMMC1SEL)))
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/** @brief Macro to configure the SDMMC2 clock (SDMMC2CLK).
+ * @param __SDMMC2_CLKSOURCE__ specifies the SDMMC2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SDMMC2CLKSOURCE_CLK48: CLK48 selected as SDMMC2 clock
+ * @arg RCC_SDMMC2CLKSOURCE_SYSCLK: SYSCLK selected as SDMMC2 clock
+ */
+#define __HAL_RCC_SDMMC2_CONFIG(__SDMMC2_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDMMC2SEL, (uint32_t)(__SDMMC2_CLKSOURCE__))
+
+/** @brief macro to get the SDMMC2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SDMMC2CLKSOURCE_CLK48: CLK48 selected as SDMMC2 clock
+ * @arg RCC_SDMMC2CLKSOURCE_SYSCLK: SYSCLK selected as SDMMC2 clock
+ */
+#define __HAL_RCC_GET_SDMMC2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDMMC2SEL)))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/** @brief Macro to configure the DFSDM1 clock
+ * @param __DFSDM1_CLKSOURCE__ specifies the DFSDM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_DFSDM1CLKSOURCE_PCLK2: PCLK2 Clock selected as DFSDM clock
+ * @arg RCC_DFSDMCLKSOURCE_SYSCLK: System Clock selected as DFSDM clock
+ */
+#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_DFSDM1SEL, (uint32_t)(__DFSDM1_CLKSOURCE__))
+
+/** @brief Macro to get the DFSDM1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_DFSDM1CLKSOURCE_PCLK2: PCLK2 Clock selected as DFSDM1 clock
+ * @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System Clock selected as DFSDM1 clock
+ */
+#define __HAL_RCC_GET_DFSDM1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_DFSDM1SEL)))
+
+/** @brief Macro to configure the DFSDM1 Audio clock
+ * @param __DFSDM1AUDIO_CLKSOURCE__ specifies the DFSDM1 Audio clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_DFSDM1AUDIOCLKSOURCE_SAI1: SAI1 Clock selected as DFSDM1 Audio clock
+ * @arg RCC_DFSDM1AUDIOCLKSOURCE_SAI2: SAI2 Clock selected as DFSDM1 Audio clock
+ */
+#define __HAL_RCC_DFSDM1AUDIO_CONFIG(__DFSDM1AUDIO_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_ADFSDM1SEL, (uint32_t)(__DFSDM1AUDIO_CLKSOURCE__))
+
+/** @brief Macro to get the DFSDM1 Audio clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_DFSDM1AUDIOCLKSOURCE_SAI1: SAI1 Clock selected as DFSDM1 Audio clock
+ * @arg RCC_DFSDM1AUDIOCLKSOURCE_SAI2: SAI2 Clock selected as DFSDM1 Audio clock
+ */
+#define __HAL_RCC_GET_DFSDM1AUDIO_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_ADFSDM1SEL)))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F769xx) || defined (STM32F779xx)
+/** @brief Macro to configure the DSI clock.
+ * @param __DSI_CLKSOURCE__ specifies the DSI clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock.
+ * @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock.
+ */
+#define __HAL_RCC_DSI_CONFIG(__DSI_CLKSOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_DSISEL, (uint32_t)(__DSI_CLKSOURCE__)))
+
+/** @brief Macro to Get the DSI clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock.
+ * @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock.
+ */
+#define __HAL_RCC_GET_DSI_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_DSISEL))
+#endif /* STM32F769xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCCEx_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk);
+HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit);
+HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void);
+HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI(RCC_PLLSAIInitTypeDef *PLLSAIInit);
+HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI(void);
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup RCCEx_Private_Macros RCCEx Private Macros
+ * @{
+ */
+/** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters
+ * @{
+ */
+#if defined(STM32F756xx) || defined(STM32F746xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) \
+ ((((SELECTION) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || \
+ (((SELECTION) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) || \
+ (((SELECTION) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \
+ (((SELECTION) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \
+ (((SELECTION) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) || \
+ (((SELECTION) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \
+ (((SELECTION) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) || \
+ (((SELECTION) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC))
+#elif defined(STM32F745xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) \
+ ((((SELECTION) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || \
+ (((SELECTION) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \
+ (((SELECTION) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \
+ (((SELECTION) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) || \
+ (((SELECTION) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \
+ (((SELECTION) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) || \
+ (((SELECTION) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC))
+#elif defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) \
+ ((((SELECTION) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || \
+ (((SELECTION) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) || \
+ (((SELECTION) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \
+ (((SELECTION) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \
+ (((SELECTION) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) || \
+ (((SELECTION) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \
+ (((SELECTION) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SDMMC2) == RCC_PERIPHCLK_SDMMC2) || \
+ (((SELECTION) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) || \
+ (((SELECTION) & RCC_PERIPHCLK_DFSDM1_AUDIO) == RCC_PERIPHCLK_DFSDM1_AUDIO) || \
+ (((SELECTION) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) || \
+ (((SELECTION) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC))
+#elif defined (STM32F765xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) \
+ ((((SELECTION) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || \
+ (((SELECTION) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \
+ (((SELECTION) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \
+ (((SELECTION) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) || \
+ (((SELECTION) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \
+ (((SELECTION) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SDMMC2) == RCC_PERIPHCLK_SDMMC2) || \
+ (((SELECTION) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) || \
+ (((SELECTION) & RCC_PERIPHCLK_DFSDM1_AUDIO) == RCC_PERIPHCLK_DFSDM1_AUDIO) || \
+ (((SELECTION) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) || \
+ (((SELECTION) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC))
+#elif defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) \
+ ((((SELECTION) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || \
+ (((SELECTION) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((SELECTION) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \
+ (((SELECTION) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) || \
+ (((SELECTION) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SDMMC2) == RCC_PERIPHCLK_SDMMC2) || \
+ (((SELECTION) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC))
+#endif /* STM32F746xx || STM32F756xx */
+#define IS_RCC_PLLI2SN_VALUE(VALUE) ((50 <= (VALUE)) && ((VALUE) <= 432))
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || defined (STM32F767xx) || \
+ defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define IS_RCC_PLLI2SP_VALUE(VALUE) (((VALUE) == RCC_PLLI2SP_DIV2) ||\
+ ((VALUE) == RCC_PLLI2SP_DIV4) ||\
+ ((VALUE) == RCC_PLLI2SP_DIV6) ||\
+ ((VALUE) == RCC_PLLI2SP_DIV8))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
+#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
+
+#define IS_RCC_PLLSAIN_VALUE(VALUE) ((50 <= (VALUE)) && ((VALUE) <= 432))
+#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV4) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV6) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV8))
+#define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
+#define IS_RCC_PLLSAIR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
+
+#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
+
+#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
+
+#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDIVR_2) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_4) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_8) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_16))
+#define IS_RCC_I2SCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SCLKSOURCE_PLLI2S) || \
+ ((SOURCE) == RCC_I2SCLKSOURCE_EXT))
+
+#define IS_RCC_SDMMC1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SDMMC1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_SDMMC1CLKSOURCE_CLK48))
+
+#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_CECCLKSOURCE_LSE))
+#define IS_RCC_USART1CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+
+#define IS_RCC_USART2CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_USART2CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_HSI))
+#define IS_RCC_USART3CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_USART3CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_HSI))
+
+#define IS_RCC_UART4CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_UART4CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_HSI))
+
+#define IS_RCC_UART5CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_UART5CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_HSI))
+
+#define IS_RCC_USART6CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_USART6CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART6CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART6CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART6CLKSOURCE_HSI))
+
+#define IS_RCC_UART7CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_UART7CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART7CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART7CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART7CLKSOURCE_HSI))
+
+#define IS_RCC_UART8CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_UART8CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART8CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART8CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART8CLKSOURCE_HSI))
+#define IS_RCC_I2C1CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_I2C1CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_I2C1CLKSOURCE_SYSCLK)|| \
+ ((SOURCE) == RCC_I2C1CLKSOURCE_HSI))
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_I2C2CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK)|| \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_HSI))
+
+#define IS_RCC_I2C3CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_I2C3CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_I2C3CLKSOURCE_SYSCLK)|| \
+ ((SOURCE) == RCC_I2C3CLKSOURCE_HSI))
+#define IS_RCC_I2C4CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_I2C4CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_I2C4CLKSOURCE_SYSCLK)|| \
+ ((SOURCE) == RCC_I2C4CLKSOURCE_HSI))
+#define IS_RCC_LPTIM1CLK(SOURCE) \
+ (((SOURCE) == RCC_LPTIM1CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSI) || \
+ ((SOURCE) == RCC_LPTIM1CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSE))
+#define IS_RCC_CLK48SOURCE(SOURCE) \
+ (((SOURCE) == RCC_CLK48SOURCE_PLLSAIP) || \
+ ((SOURCE) == RCC_CLK48SOURCE_PLL))
+#define IS_RCC_TIMPRES(VALUE) \
+ (((VALUE) == RCC_TIMPRES_DESACTIVATED) || \
+ ((VALUE) == RCC_TIMPRES_ACTIVATED))
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F745xx) ||\
+ defined (STM32F746xx) || defined (STM32F756xx)
+#define IS_RCC_SAI1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI1CLKSOURCE_PLLSAI) || \
+ ((SOURCE) == RCC_SAI1CLKSOURCE_PLLI2S) || \
+ ((SOURCE) == RCC_SAI1CLKSOURCE_PIN))
+#define IS_RCC_SAI2CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI2CLKSOURCE_PLLSAI) || \
+ ((SOURCE) == RCC_SAI2CLKSOURCE_PLLI2S) || \
+ ((SOURCE) == RCC_SAI2CLKSOURCE_PIN))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F745xx || STM32F746xx || STM32F756xx */
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define IS_RCC_PLLR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
+
+#define IS_RCC_SAI1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI1CLKSOURCE_PLLSAI) || \
+ ((SOURCE) == RCC_SAI1CLKSOURCE_PLLI2S) || \
+ ((SOURCE) == RCC_SAI1CLKSOURCE_PIN) || \
+ ((SOURCE) == RCC_SAI1CLKSOURCE_PLLSRC))
+
+#define IS_RCC_SAI2CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI2CLKSOURCE_PLLSAI) || \
+ ((SOURCE) == RCC_SAI2CLKSOURCE_PLLI2S) || \
+ ((SOURCE) == RCC_SAI2CLKSOURCE_PIN) || \
+ ((SOURCE) == RCC_SAI2CLKSOURCE_PLLSRC))
+
+#define IS_RCC_DFSDM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_DFSDM1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_DFSDM1CLKSOURCE_SYSCLK))
+
+#define IS_RCC_DFSDM1AUDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_DFSDM1AUDIOCLKSOURCE_SAI1) || \
+ ((SOURCE) == RCC_DFSDM1AUDIOCLKSOURCE_SAI2))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define IS_RCC_SDMMC2CLKSOURCE(SOURCE) (((SOURCE) == RCC_SDMMC2CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_SDMMC2CLKSOURCE_CLK48))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define IS_RCC_DSIBYTELANECLKSOURCE(SOURCE) (((SOURCE) == RCC_DSICLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_DSICLKSOURCE_DSIPHY))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h
new file mode 100644
index 00000000..74255a4e
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h
@@ -0,0 +1,1806 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_tim.h
+ * @author MCD Application Team
+ * @brief Header file of TIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_TIM_H
+#define __STM32F7xx_HAL_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIM
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Types TIM Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Time base Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_Counter_Mode */
+
+ uint32_t Period; /*!< Specifies the period value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_ClockDivision */
+
+ uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR down-counter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload.
+ This parameter can be a value of @ref TIM_AutoReloadPreload */
+
+} TIM_Base_InitTypeDef;
+
+/**
+ * @brief TIM Output Compare Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIMEx_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCFastMode; /*!< Specifies the Fast mode state.
+ This parameter can be a value of @ref TIM_Output_Fast_State
+ @note This parameter is valid only in PWM1 and PWM2 mode. */
+
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OC_InitTypeDef;
+
+/**
+ * @brief TIM One Pulse Mode Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIMEx_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_OnePulse_InitTypeDef;
+
+
+/**
+ * @brief TIM Input Capture Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_IC_InitTypeDef;
+
+/**
+ * @brief TIM Encoder Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t EncoderMode; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Encoder_Mode */
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC2Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC2Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_Encoder_InitTypeDef;
+
+/**
+ * @brief Clock Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSource; /*!< TIM clock sources.
+ This parameter can be a value of @ref TIM_Clock_Source */
+ uint32_t ClockPolarity; /*!< TIM clock polarity.
+ This parameter can be a value of @ref TIM_Clock_Polarity */
+ uint32_t ClockPrescaler; /*!< TIM clock prescaler.
+ This parameter can be a value of @ref TIM_Clock_Prescaler */
+ uint32_t ClockFilter; /*!< TIM clock filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+}TIM_ClockConfigTypeDef;
+
+/**
+ * @brief Clear Input Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClearInputState; /*!< TIM clear Input state.
+ This parameter can be ENABLE or DISABLE */
+ uint32_t ClearInputSource; /*!< TIM clear Input sources.
+ This parameter can be a value of @ref TIMEx_ClearInput_Source */
+ uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity.
+ This parameter can be a value of @ref TIM_ClearInput_Polarity */
+ uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler.
+ This parameter can be a value of @ref TIM_ClearInput_Prescaler */
+ uint32_t ClearInputFilter; /*!< TIM Clear Input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+}TIM_ClearInputConfigTypeDef;
+
+/**
+ * @brief TIM Slave configuration Structure definition
+ */
+typedef struct {
+ uint32_t SlaveMode; /*!< Slave mode selection
+ This parameter can be a value of @ref TIMEx_Slave_Mode */
+ uint32_t InputTrigger; /*!< Input Trigger source
+ This parameter can be a value of @ref TIM_Trigger_Selection */
+ uint32_t TriggerPolarity; /*!< Input Trigger polarity
+ This parameter can be a value of @ref TIM_Trigger_Polarity */
+ uint32_t TriggerPrescaler; /*!< Input trigger prescaler
+ This parameter can be a value of @ref TIM_Trigger_Prescaler */
+ uint32_t TriggerFilter; /*!< Input trigger filter
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+}TIM_SlaveConfigTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */
+ HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */
+ HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
+ HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */
+}HAL_TIM_StateTypeDef;
+
+/**
+ * @brief HAL Active channel structures definition
+ */
+typedef enum
+{
+ HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */
+ HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */
+ HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */
+ HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */
+ HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */
+}HAL_TIM_ActiveChannel;
+
+/**
+ * @brief TIM Time Base Handle Structure definition
+ */
+typedef struct __TIM_HandleTypeDef
+{
+ TIM_TypeDef *Instance; /*!< Register base address */
+ TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
+ HAL_TIM_ActiveChannel Channel; /*!< Active channel */
+ DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
+ This array is accessed by a @ref DMA_Handle_index */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ void (* Base_MspInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */
+ void (* Base_MspDeInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */
+ void (* IC_MspInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */
+ void (* IC_MspDeInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */
+ void (* OC_MspInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */
+ void (* OC_MspDeInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */
+ void (* PWM_MspInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */
+ void (* PWM_MspDeInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */
+ void (* OnePulse_MspInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */
+ void (* OnePulse_MspDeInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */
+ void (* Encoder_MspInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */
+ void (* Encoder_MspDeInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */
+ void (* HallSensor_MspInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */
+ void (* HallSensor_MspDeInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */
+
+ void (* PeriodElapsedCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */
+ void (* TriggerCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */
+ void (* IC_CaptureCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */
+ void (* OC_DelayElapsedCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */
+ void (* PWM_PulseFinishedCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */
+ void (* ErrorCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */
+ void (* CommutationCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */
+ void (* BreakCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */
+
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+}TIM_HandleTypeDef;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+/**
+ * @brief HAL TIM Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U, /*!< TIM Base MspInit Callback ID */
+ HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U, /*!< TIM Base MspDeInit Callback ID */
+ HAL_TIM_IC_MSPINIT_CB_ID = 0x02U, /*!< TIM IC MspInit Callback ID */
+ HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U, /*!< TIM IC MspDeInit Callback ID */
+ HAL_TIM_OC_MSPINIT_CB_ID = 0x04U, /*!< TIM OC MspInit Callback ID */
+ HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U, /*!< TIM OC MspDeInit Callback ID */
+ HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U, /*!< TIM PWM MspInit Callback ID */
+ HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U, /*!< TIM PWM MspDeInit Callback ID */
+ HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U, /*!< TIM One Pulse MspInit Callback ID */
+ HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U, /*!< TIM One Pulse MspDeInit Callback ID */
+ HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU, /*!< TIM Encoder MspInit Callback ID */
+ HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU, /*!< TIM Encoder MspDeInit Callback ID */
+ HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU, /*!< TIM Encoder MspDeInit Callback ID */
+ HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU, /*!< TIM Encoder MspDeInit Callback ID */
+
+ HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU, /*!< TIM Period Elapsed Callback ID */
+ HAL_TIM_TRIGGER_CB_ID = 0x0FU, /*!< TIM Trigger Callback ID */
+ HAL_TIM_IC_CAPTURE_CB_ID = 0x10U, /*!< TIM Input Capture Callback ID */
+ HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x11U, /*!< TIM Output Compare Delay Elapsed Callback ID */
+ HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x12U, /*!< TIM PWM Pulse Finished Callback ID */
+ HAL_TIM_ERROR_CB_ID = 0x13U, /*!< TIM Error Callback ID */
+ HAL_TIM_COMMUTATION_CB_ID = 0x14U, /*!< TIM Commutation Callback ID */
+ HAL_TIM_BREAK_CB_ID = 0x15U /*!< TIM Break Callback ID */
+
+}HAL_TIM_CallbackIDTypeDef;
+
+/**
+ * @brief HAL TIM Callback pointer definition
+ */
+typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef * htim); /*!< pointer to the TIM callback function */
+
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Constants TIM Exported Constants
+ * @{
+ */
+
+/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel Polarity
+ * @{
+ */
+#define TIM_INPUTCHANNELPOLARITY_RISING ((uint32_t)0x00000000U) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_FALLING (TIM_CCER_CC1P) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Polarity TIM ETR Polarity
+ * @{
+ */
+#define TIM_ETRPOLARITY_INVERTED (TIM_SMCR_ETP) /*!< Polarity for ETR source */
+#define TIM_ETRPOLARITY_NONINVERTED ((uint32_t)0x0000U) /*!< Polarity for ETR source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler
+ * @{
+ */
+#define TIM_ETRPRESCALER_DIV1 ((uint32_t)0x0000U) /*!< No prescaler is used */
+#define TIM_ETRPRESCALER_DIV2 (TIM_SMCR_ETPS_0) /*!< ETR input source is divided by 2 */
+#define TIM_ETRPRESCALER_DIV4 (TIM_SMCR_ETPS_1) /*!< ETR input source is divided by 4 */
+#define TIM_ETRPRESCALER_DIV8 (TIM_SMCR_ETPS) /*!< ETR input source is divided by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Counter_Mode TIM Counter Mode
+ * @{
+ */
+#define TIM_COUNTERMODE_UP ((uint32_t)0x0000U)
+#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR
+#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0
+#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1
+#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClockDivision TIM Clock Division
+ * @{
+ */
+#define TIM_CLOCKDIVISION_DIV1 ((uint32_t)0x0000U)
+#define TIM_CLOCKDIVISION_DIV2 (TIM_CR1_CKD_0)
+#define TIM_CLOCKDIVISION_DIV4 (TIM_CR1_CKD_1)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_State TIM Output Compare State
+ * @{
+ */
+#define TIM_OUTPUTSTATE_DISABLE ((uint32_t)0x0000U)
+#define TIM_OUTPUTSTATE_ENABLE (TIM_CCER_CC1E)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload
+ * @{
+ */
+#define TIM_AUTORELOAD_PRELOAD_DISABLE ((uint32_t)0x0000) /*!< TIMx_ARR register is not buffered */
+#define TIM_AUTORELOAD_PRELOAD_ENABLE (TIM_CR1_ARPE) /*!< TIMx_ARR register is buffered */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Fast_State TIM Output Fast State
+ * @{
+ */
+#define TIM_OCFAST_DISABLE ((uint32_t)0x0000U)
+#define TIM_OCFAST_ENABLE (TIM_CCMR1_OC1FE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State
+ * @{
+ */
+#define TIM_OUTPUTNSTATE_DISABLE ((uint32_t)0x0000U)
+#define TIM_OUTPUTNSTATE_ENABLE (TIM_CCER_CC1NE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity
+ * @{
+ */
+#define TIM_OCPOLARITY_HIGH ((uint32_t)0x0000U)
+#define TIM_OCPOLARITY_LOW (TIM_CCER_CC1P)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity
+ * @{
+ */
+#define TIM_OCNPOLARITY_HIGH ((uint32_t)0x0000U)
+#define TIM_OCNPOLARITY_LOW (TIM_CCER_CC1NP)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State
+ * @{
+ */
+#define TIM_OCIDLESTATE_SET (TIM_CR2_OIS1)
+#define TIM_OCIDLESTATE_RESET ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State TIM Output Compare N Idle State
+ * @{
+ */
+#define TIM_OCNIDLESTATE_SET (TIM_CR2_OIS1N)
+#define TIM_OCNIDLESTATE_RESET ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity
+ * @{
+ */
+#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING
+#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING
+#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
+ * @{
+ */
+#define TIM_ICSELECTION_DIRECTTI (TIM_CCMR1_CC1S_0) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI (TIM_CCMR1_CC1S_1) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_TRC (TIM_CCMR1_CC1S) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler
+ * @{
+ */
+#define TIM_ICPSC_DIV1 ((uint32_t)0x0000U) /*!< Capture performed each time an edge is detected on the capture input */
+#define TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0) /*!< Capture performed once every 2 events */
+#define TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 4 events */
+#define TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC) /*!< Capture performed once every 8 events */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode
+ * @{
+ */
+#define TIM_OPMODE_SINGLE (TIM_CR1_OPM)
+#define TIM_OPMODE_REPETITIVE ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Encoder_Mode TIM Encoder Mode
+ * @{
+ */
+#define TIM_ENCODERMODE_TI1 (TIM_SMCR_SMS_0)
+#define TIM_ENCODERMODE_TI2 (TIM_SMCR_SMS_1)
+#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Interrupt_definition TIM Interrupt definition
+ * @{
+ */
+#define TIM_IT_UPDATE (TIM_DIER_UIE)
+#define TIM_IT_CC1 (TIM_DIER_CC1IE)
+#define TIM_IT_CC2 (TIM_DIER_CC2IE)
+#define TIM_IT_CC3 (TIM_DIER_CC3IE)
+#define TIM_IT_CC4 (TIM_DIER_CC4IE)
+#define TIM_IT_COM (TIM_DIER_COMIE)
+#define TIM_IT_TRIGGER (TIM_DIER_TIE)
+#define TIM_IT_BREAK (TIM_DIER_BIE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Commutation_Source TIM Commutation Source
+ * @{
+ */
+#define TIM_COMMUTATION_TRGI (TIM_CR2_CCUS)
+#define TIM_COMMUTATION_SOFTWARE ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_sources TIM DMA sources
+ * @{
+ */
+#define TIM_DMA_UPDATE (TIM_DIER_UDE)
+#define TIM_DMA_CC1 (TIM_DIER_CC1DE)
+#define TIM_DMA_CC2 (TIM_DIER_CC2DE)
+#define TIM_DMA_CC3 (TIM_DIER_CC3DE)
+#define TIM_DMA_CC4 (TIM_DIER_CC4DE)
+#define TIM_DMA_COM (TIM_DIER_COMDE)
+#define TIM_DMA_TRIGGER (TIM_DIER_TDE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Event_Source TIM Event Source
+ * @{
+ */
+#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG
+#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G
+#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G
+#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G
+#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G
+#define TIM_EVENTSOURCE_COM TIM_EGR_COMG
+#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG
+#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG
+#define TIM_EVENTSOURCE_BREAK2 TIM_EGR_B2G
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Flag_definition TIM Flag definition
+ * @{
+ */
+#define TIM_FLAG_UPDATE (TIM_SR_UIF)
+#define TIM_FLAG_CC1 (TIM_SR_CC1IF)
+#define TIM_FLAG_CC2 (TIM_SR_CC2IF)
+#define TIM_FLAG_CC3 (TIM_SR_CC3IF)
+#define TIM_FLAG_CC4 (TIM_SR_CC4IF)
+#define TIM_FLAG_COM (TIM_SR_COMIF)
+#define TIM_FLAG_TRIGGER (TIM_SR_TIF)
+#define TIM_FLAG_BREAK (TIM_SR_BIF)
+#define TIM_FLAG_BREAK2 (TIM_SR_B2IF)
+#define TIM_FLAG_CC1OF (TIM_SR_CC1OF)
+#define TIM_FLAG_CC2OF (TIM_SR_CC2OF)
+#define TIM_FLAG_CC3OF (TIM_SR_CC3OF)
+#define TIM_FLAG_CC4OF (TIM_SR_CC4OF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Source TIM Clock Source
+ * @{
+ */
+#define TIM_CLOCKSOURCE_ETRMODE2 (TIM_SMCR_ETPS_1)
+#define TIM_CLOCKSOURCE_INTERNAL (TIM_SMCR_ETPS_0)
+#define TIM_CLOCKSOURCE_ITR0 ((uint32_t)0x0000U)
+#define TIM_CLOCKSOURCE_ITR1 (TIM_SMCR_TS_0)
+#define TIM_CLOCKSOURCE_ITR2 (TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_TI1ED (TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_ETRMODE1 (TIM_SMCR_TS)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Polarity TIM Clock Polarity
+ * @{
+ */
+#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler
+ * @{
+ */
+#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
+#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
+#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity
+ * @{
+ */
+#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */
+#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler
+ * @{
+ */
+#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state
+ * @{
+ */
+#define TIM_OSSR_ENABLE (TIM_BDTR_OSSR)
+#define TIM_OSSR_DISABLE ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state
+ * @{
+ */
+#define TIM_OSSI_ENABLE (TIM_BDTR_OSSI)
+#define TIM_OSSI_DISABLE ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Lock_level TIM Lock level
+ * @{
+ */
+#define TIM_LOCKLEVEL_OFF ((uint32_t)0x0000U)
+#define TIM_LOCKLEVEL_1 (TIM_BDTR_LOCK_0)
+#define TIM_LOCKLEVEL_2 (TIM_BDTR_LOCK_1)
+#define TIM_LOCKLEVEL_3 (TIM_BDTR_LOCK)
+/**
+ * @}
+ */
+/** @defgroup TIM_Break_Input_enable_disable TIM Break Input State
+ * @{
+ */
+#define TIM_BREAK_ENABLE (TIM_BDTR_BKE)
+#define TIM_BREAK_DISABLE ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Break_Polarity TIM Break Polarity
+ * @{
+ */
+#define TIM_BREAKPOLARITY_LOW ((uint32_t)0x0000U)
+#define TIM_BREAKPOLARITY_HIGH (TIM_BDTR_BKP)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_AOE_Bit_Set_Reset TIM AOE Bit State
+ * @{
+ */
+#define TIM_AUTOMATICOUTPUT_ENABLE (TIM_BDTR_AOE)
+#define TIM_AUTOMATICOUTPUT_DISABLE ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection
+ * @{
+ */
+#define TIM_TRGO_RESET ((uint32_t)0x0000U)
+#define TIM_TRGO_ENABLE (TIM_CR2_MMS_0)
+#define TIM_TRGO_UPDATE (TIM_CR2_MMS_1)
+#define TIM_TRGO_OC1 ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC1REF (TIM_CR2_MMS_2)
+#define TIM_TRGO_OC2REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC3REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1))
+#define TIM_TRGO_OC4REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Slave_Mode TIM Master Slave Mode
+ * @{
+ */
+#define TIM_MASTERSLAVEMODE_ENABLE ((uint32_t)0x0080)
+#define TIM_MASTERSLAVEMODE_DISABLE ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Selection TIM Trigger Selection
+ * @{
+ */
+#define TIM_TS_ITR0 ((uint32_t)0x0000U)
+#define TIM_TS_ITR1 ((uint32_t)0x0010U)
+#define TIM_TS_ITR2 ((uint32_t)0x0020U)
+#define TIM_TS_ITR3 ((uint32_t)0x0030U)
+#define TIM_TS_TI1F_ED ((uint32_t)0x0040U)
+#define TIM_TS_TI1FP1 ((uint32_t)0x0050U)
+#define TIM_TS_TI2FP2 ((uint32_t)0x0060U)
+#define TIM_TS_ETRF ((uint32_t)0x0070U)
+#define TIM_TS_NONE ((uint32_t)0xFFFFU)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity
+ * @{
+ */
+#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler
+ * @{
+ */
+#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
+#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
+#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+
+/** @defgroup TIM_TI1_Selection TIM TI1 Selection
+ * @{
+ */
+#define TIM_TI1SELECTION_CH1 ((uint32_t)0x0000U)
+#define TIM_TI1SELECTION_XORCOMBINATION (TIM_CR2_TI1S)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address TIM DMA Base address
+ * @{
+ */
+#define TIM_DMABASE_CR1 (0x00000000U)
+#define TIM_DMABASE_CR2 (0x00000001U)
+#define TIM_DMABASE_SMCR (0x00000002U)
+#define TIM_DMABASE_DIER (0x00000003U)
+#define TIM_DMABASE_SR (0x00000004U)
+#define TIM_DMABASE_EGR (0x00000005U)
+#define TIM_DMABASE_CCMR1 (0x00000006U)
+#define TIM_DMABASE_CCMR2 (0x00000007U)
+#define TIM_DMABASE_CCER (0x00000008U)
+#define TIM_DMABASE_CNT (0x00000009U)
+#define TIM_DMABASE_PSC (0x0000000AU)
+#define TIM_DMABASE_ARR (0x0000000BU)
+#define TIM_DMABASE_RCR (0x0000000CU)
+#define TIM_DMABASE_CCR1 (0x0000000DU)
+#define TIM_DMABASE_CCR2 (0x0000000EU)
+#define TIM_DMABASE_CCR3 (0x0000000FU)
+#define TIM_DMABASE_CCR4 (0x00000010U)
+#define TIM_DMABASE_BDTR (0x00000011U)
+#define TIM_DMABASE_DCR (0x00000012U)
+#define TIM_DMABASE_OR (0x00000013U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
+ * @{
+ */
+#define TIM_DMABURSTLENGTH_1TRANSFER (0x00000000U)
+#define TIM_DMABURSTLENGTH_2TRANSFERS (0x00000100U)
+#define TIM_DMABURSTLENGTH_3TRANSFERS (0x00000200U)
+#define TIM_DMABURSTLENGTH_4TRANSFERS (0x00000300U)
+#define TIM_DMABURSTLENGTH_5TRANSFERS (0x00000400U)
+#define TIM_DMABURSTLENGTH_6TRANSFERS (0x00000500U)
+#define TIM_DMABURSTLENGTH_7TRANSFERS (0x00000600U)
+#define TIM_DMABURSTLENGTH_8TRANSFERS (0x00000700U)
+#define TIM_DMABURSTLENGTH_9TRANSFERS (0x00000800U)
+#define TIM_DMABURSTLENGTH_10TRANSFERS (0x00000900U)
+#define TIM_DMABURSTLENGTH_11TRANSFERS (0x00000A00U)
+#define TIM_DMABURSTLENGTH_12TRANSFERS (0x00000B00U)
+#define TIM_DMABURSTLENGTH_13TRANSFERS (0x00000C00U)
+#define TIM_DMABURSTLENGTH_14TRANSFERS (0x00000D00U)
+#define TIM_DMABURSTLENGTH_15TRANSFERS (0x00000E00U)
+#define TIM_DMABURSTLENGTH_16TRANSFERS (0x00000F00U)
+#define TIM_DMABURSTLENGTH_17TRANSFERS (0x00001000U)
+#define TIM_DMABURSTLENGTH_18TRANSFERS (0x00001100U)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Handle_index DMA Handle index
+ * @{
+ */
+#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0U) /*!< Index of the DMA handle used for Update DMA requests */
+#define TIM_DMA_ID_CC1 ((uint16_t) 0x1U) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
+#define TIM_DMA_ID_CC2 ((uint16_t) 0x2U) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
+#define TIM_DMA_ID_CC3 ((uint16_t) 0x3U) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
+#define TIM_DMA_ID_CC4 ((uint16_t) 0x4U) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
+#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x5U) /*!< Index of the DMA handle used for Commutation DMA requests */
+#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x6U) /*!< Index of the DMA handle used for Trigger DMA requests */
+/**
+ * @}
+ */
+
+/** @defgroup Channel_CC_State Channel CC State
+ * @{
+ */
+#define TIM_CCx_ENABLE ((uint32_t)0x0001U)
+#define TIM_CCx_DISABLE ((uint32_t)0x0000U)
+#define TIM_CCxN_ENABLE ((uint32_t)0x0004U)
+#define TIM_CCxN_DISABLE ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Macros TIM Exported Macros
+ * @{
+ */
+/** @brief Reset TIM handle state
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
+
+/**
+ * @brief Enable the TIM peripheral.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
+
+/**
+ * @brief Enable the TIM update source request.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_URS))
+
+/**
+ * @brief Enable the TIM main Output.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
+
+/**
+ * @brief Disable the TIM peripheral.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0) \
+ { \
+ (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
+ } \
+ } \
+ } while(0)
+
+/**
+ * @brief Disable the TIM update source request.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~(TIM_CR1_URS))
+
+/**
+ * @brief Disable the TIM main Output.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled
+ */
+#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0) \
+ { \
+ (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
+ } \
+ } \
+ } while(0)
+
+/** @brief Enable the specified TIM interrupt.
+ * @param __HANDLE__: specifies the TIM Handle.
+ * @param __INTERRUPT__: specifies the TIM interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
+
+/** @brief Disable the specified TIM interrupt.
+ * @param __HANDLE__: specifies the TIM Handle.
+ * @param __INTERRUPT__: specifies the TIM interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
+
+/** @brief Enable the specified DMA request.
+ * @param __HANDLE__: specifies the TIM Handle.
+ * @param __DMA__: specifies the TIM DMA request to enable.
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: Update DMA request
+ * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request
+ * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request
+ * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request
+ * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request
+ * @arg TIM_DMA_COM: Commutation DMA request
+ * @arg TIM_DMA_TRIGGER: Trigger DMA request
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__))
+
+/** @brief Disable the specified DMA request.
+ * @param __HANDLE__: specifies the TIM Handle.
+ * @param __DMA__: specifies the TIM DMA request to disable.
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: Update DMA request
+ * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request
+ * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request
+ * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request
+ * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request
+ * @arg TIM_DMA_COM: Commutation DMA request
+ * @arg TIM_DMA_TRIGGER: Trigger DMA request
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
+
+/** @brief Check whether the specified TIM interrupt flag is set or not.
+ * @param __HANDLE__: specifies the TIM Handle.
+ * @param __FLAG__: specifies the TIM interrupt flag to check.
+ * This parameter can be one of the following values:
+ * @arg TIM_FLAG_UPDATE: Update interrupt flag
+ * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
+ * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
+ * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
+ * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
+ * @arg TIM_FLAG_COM: Commutation interrupt flag
+ * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
+ * @arg TIM_FLAG_BREAK: Break interrupt flag
+ * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag
+ * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
+ * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
+ * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
+ * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the specified TIM interrupt flag.
+ * @param __HANDLE__: specifies the TIM Handle.
+ * @param __FLAG__: specifies the TIM interrupt flag to clear.
+ * This parameter can be one of the following values:
+ * @arg TIM_FLAG_UPDATE: Update interrupt flag
+ * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
+ * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
+ * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
+ * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
+ * @arg TIM_FLAG_COM: Commutation interrupt flag
+ * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
+ * @arg TIM_FLAG_BREAK: Break interrupt flag
+ * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag
+ * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
+ * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
+ * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
+ * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/**
+ * @brief Check whether the specified TIM interrupt source is enabled or not.
+ * @param __HANDLE__: TIM handle
+ * @param __INTERRUPT__: specifies the TIM interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval The state of TIM_IT (SET or RESET).
+ */
+#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Clear the TIM interrupt pending bits.
+ * @param __HANDLE__: TIM handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval None
+ */
+#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+/**
+ * @brief Indicates whether or not the TIM Counter is used as downcounter.
+ * @param __HANDLE__: TIM handle.
+ * @retval False (Counter used as upcounter) or True (Counter used as downcounter)
+ * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder
+mode.
+ */
+#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
+
+/**
+ * @brief Set the TIM Prescaler on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @param __PRESC__: specifies the Prescaler new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
+
+/**
+ * @brief Set the TIM Counter Register value on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @param __COUNTER__ specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
+
+/**
+ * @brief Get the TIM Counter Register value on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @retval 16-bit or 32-bit value of the timer counter register
+ */
+#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT)
+
+/**
+ * @brief Set the TIM Autoreload Register value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__ TIM handle.
+ * @param __AUTORELOAD__ specifies the Counter register new value.
+ * @retval 16-bit or 32-bit value of the timer auto-reload
+ */
+#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \
+ do{ \
+ (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \
+ (__HANDLE__)->Init.Period = (__AUTORELOAD__); \
+ } while(0)
+/**
+ * @brief Get the TIM Autoreload Register value on runtime
+ * @param __HANDLE__ TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR)
+
+/**
+ * @brief Set the TIM Clock Division value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CKD__ specifies the clock division value.
+ * This parameter can be one of the following value:
+ * @arg TIM_CLOCKDIVISION_DIV1
+ * @arg TIM_CLOCKDIVISION_DIV2
+ * @arg TIM_CLOCKDIVISION_DIV4
+ * @retval None
+ */
+#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \
+ do{ \
+ (__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD); \
+ (__HANDLE__)->Instance->CR1 |= (__CKD__); \
+ (__HANDLE__)->Init.ClockDivision = (__CKD__); \
+ } while(0)
+/**
+ * @brief Get the TIM Clock Division value on runtime
+ * @param __HANDLE__ TIM handle.
+ * @retval The clock division can be one of the following values:
+ * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT
+ */
+#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
+
+/**
+ * @brief Set the TIM Input Capture prescaler on runtime without calling
+ * another time HAL_TIM_IC_ConfigChannel() function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __ICPSC__ specifies the Input Capture4 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \
+ do{ \
+ TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \
+ TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
+ } while(0)
+
+/**
+ * @brief Get the TIM Input Capture prescaler on runtime
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get input capture 1 prescaler value
+ * @arg TIM_CHANNEL_2: get input capture 2 prescaler value
+ * @arg TIM_CHANNEL_3: get input capture 3 prescaler value
+ * @arg TIM_CHANNEL_4: get input capture 4 prescaler value
+ * @retval The input capture prescaler can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ */
+#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
+ (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8)
+
+/**
+ * @brief Set the TIM Capture x input polarity on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __POLARITY__ Polarity for TIx source
+ * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge
+ * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge
+ * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge
+ * @note The polarity TIM_INPUTCHANNELPOLARITY_BOTHEDGE is not authorized for TIM Channel 4.
+ * @retval None
+ */
+#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+ do{ \
+ TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \
+ TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \
+ }while(0)
+
+/**
+ * @}
+ */
+/* End of exported macros ----------------------------------------------------*/
+
+/* Include TIM HAL Extension module */
+#include "stm32f7xx_hal_tim_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIM_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group1
+ * @{
+ */
+
+/* Time Base functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group2
+ * @{
+ */
+/* Timer Output Compare functions **********************************************/
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group3
+ * @{
+ */
+/* Timer PWM functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
+
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group4
+ * @{
+ */
+/* Timer Input Capture functions ***********************************************/
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group5
+ * @{
+ */
+/* Timer One Pulse functions ***************************************************/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group6
+ * @{
+ */
+/* Timer Encoder functions *****************************************************/
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group7
+ * @{
+ */
+/* Interrupt Handler functions **********************************************/
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group8
+ * @{
+ */
+/* Control functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel);
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig);
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group9
+ * @{
+ */
+/* Callback in non blocking modes (Interrupt and DMA) *************************/
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
+
+/* Callbacks Register/UnRegister functions ***********************************/
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, pTIM_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group10
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup TIM_Private_Constants TIM Private Constants
+ * @{
+ */
+/* The counter of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
+#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
+/**
+ * @}
+ */
+/* End of private constants --------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup TIM_Private_Macros TIM Private Macros
+ * @{
+ */
+
+/** @defgroup TIM_IS_TIM_Definitions TIM Private macros to check input parameters
+ * @{
+ */
+#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \
+ ((__MODE__) == TIM_COUNTERMODE_DOWN) || \
+ ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \
+ ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \
+ ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3))
+
+#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \
+ ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \
+ ((__DIV__) == TIM_CLOCKDIVISION_DIV4))
+
+#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \
+ ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE))
+
+#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \
+ ((__STATE__) == TIM_OCFAST_ENABLE))
+
+#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OUTPUTSTATE_DISABLE) || \
+ ((STATE) == TIM_OUTPUTSTATE_ENABLE))
+
+#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OUTPUTNSTATE_DISABLE) || \
+ ((STATE) == TIM_OUTPUTNSTATE_ENABLE))
+
+#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \
+ ((__POLARITY__) == TIM_OCPOLARITY_LOW))
+
+#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \
+ ((__POLARITY__) == TIM_OCNPOLARITY_LOW))
+
+#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \
+ ((__STATE__) == TIM_OCIDLESTATE_RESET))
+
+#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \
+ ((__STATE__) == TIM_OCNIDLESTATE_RESET))
+
+#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \
+ ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \
+ ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE))
+
+#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \
+ ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \
+ ((__SELECTION__) == TIM_ICSELECTION_TRC))
+
+#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \
+ ((__PRESCALER__) == TIM_ICPSC_DIV2) || \
+ ((__PRESCALER__) == TIM_ICPSC_DIV4) || \
+ ((__PRESCALER__) == TIM_ICPSC_DIV8))
+
+#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \
+ ((__MODE__) == TIM_OPMODE_REPETITIVE))
+
+#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \
+ ((__MODE__) == TIM_ENCODERMODE_TI2) || \
+ ((__MODE__) == TIM_ENCODERMODE_TI12))
+
+#define IS_TIM_IT(__IT__) ((((__IT__) & 0xFFFFFF00U) == 0x00000000U) && ((__IT__) != 0x00000000U))
+
+
+#define IS_TIM_GET_IT(__IT__) (((__IT__) == TIM_IT_UPDATE) || \
+ ((__IT__) == TIM_IT_CC1) || \
+ ((__IT__) == TIM_IT_CC2) || \
+ ((__IT__) == TIM_IT_CC3) || \
+ ((__IT__) == TIM_IT_CC4) || \
+ ((__IT__) == TIM_IT_COM) || \
+ ((__IT__) == TIM_IT_TRIGGER) || \
+ ((__IT__) == TIM_IT_BREAK))
+
+#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U))
+
+#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFE00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U))
+
+#define IS_TIM_FLAG(__FLAG__) (((__FLAG__) == TIM_FLAG_UPDATE) || \
+ ((__FLAG__) == TIM_FLAG_CC1) || \
+ ((__FLAG__) == TIM_FLAG_CC2) || \
+ ((__FLAG__) == TIM_FLAG_CC3) || \
+ ((__FLAG__) == TIM_FLAG_CC4) || \
+ ((__FLAG__) == TIM_FLAG_COM) || \
+ ((__FLAG__) == TIM_FLAG_TRIGGER) || \
+ ((__FLAG__) == TIM_FLAG_BREAK) || \
+ ((__FLAG__) == TIM_FLAG_BREAK2) || \
+ ((__FLAG__) == TIM_FLAG_CC1OF) || \
+ ((__FLAG__) == TIM_FLAG_CC2OF) || \
+ ((__FLAG__) == TIM_FLAG_CC3OF) || \
+ ((__FLAG__) == TIM_FLAG_CC4OF))
+
+#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1))
+
+#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \
+ ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \
+ ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \
+ ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \
+ ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE))
+
+#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \
+ ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \
+ ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \
+ ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8))
+
+#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xF)
+
+#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
+ ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
+
+#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \
+ ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \
+ ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \
+ ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8))
+
+#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xF)
+
+#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \
+ ((__STATE__) == TIM_OSSR_DISABLE))
+
+#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \
+ ((__STATE__) == TIM_OSSI_DISABLE))
+
+#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \
+ ((__LEVEL__) == TIM_LOCKLEVEL_1) || \
+ ((__LEVEL__) == TIM_LOCKLEVEL_2) || \
+ ((__LEVEL__) == TIM_LOCKLEVEL_3))
+
+#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \
+ ((__STATE__) == TIM_BREAK_DISABLE))
+
+#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \
+ ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH))
+
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \
+ ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE))
+
+#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \
+ ((__SOURCE__) == TIM_TRGO_ENABLE) || \
+ ((__SOURCE__) == TIM_TRGO_UPDATE) || \
+ ((__SOURCE__) == TIM_TRGO_OC1) || \
+ ((__SOURCE__) == TIM_TRGO_OC1REF) || \
+ ((__SOURCE__) == TIM_TRGO_OC2REF) || \
+ ((__SOURCE__) == TIM_TRGO_OC3REF) || \
+ ((__SOURCE__) == TIM_TRGO_OC4REF))
+
+#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \
+ ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE))
+
+#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \
+ ((__SELECTION__) == TIM_TS_ITR1) || \
+ ((__SELECTION__) == TIM_TS_ITR2) || \
+ ((__SELECTION__) == TIM_TS_ITR3) || \
+ ((__SELECTION__) == TIM_TS_TI1F_ED) || \
+ ((__SELECTION__) == TIM_TS_TI1FP1) || \
+ ((__SELECTION__) == TIM_TS_TI2FP2) || \
+ ((__SELECTION__) == TIM_TS_ETRF))
+
+#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3))
+
+#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \
+ ((__SELECTION__) == TIM_TS_ITR1) || \
+ ((__SELECTION__) == TIM_TS_ITR2) || \
+ ((__SELECTION__) == TIM_TS_ITR3) || \
+ ((__SELECTION__) == TIM_TS_NONE))
+
+#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \
+ ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
+ ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \
+ ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \
+ ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE ))
+
+#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \
+ ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \
+ ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \
+ ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8))
+
+#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xF)
+
+#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \
+ ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION))
+
+#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \
+ ((__BASE__) == TIM_DMABASE_CR2) || \
+ ((__BASE__) == TIM_DMABASE_SMCR) || \
+ ((__BASE__) == TIM_DMABASE_DIER) || \
+ ((__BASE__) == TIM_DMABASE_SR) || \
+ ((__BASE__) == TIM_DMABASE_EGR) || \
+ ((__BASE__) == TIM_DMABASE_CCMR1) || \
+ ((__BASE__) == TIM_DMABASE_CCMR2) || \
+ ((__BASE__) == TIM_DMABASE_CCER) || \
+ ((__BASE__) == TIM_DMABASE_CNT) || \
+ ((__BASE__) == TIM_DMABASE_PSC) || \
+ ((__BASE__) == TIM_DMABASE_ARR) || \
+ ((__BASE__) == TIM_DMABASE_RCR) || \
+ ((__BASE__) == TIM_DMABASE_CCR1) || \
+ ((__BASE__) == TIM_DMABASE_CCR2) || \
+ ((__BASE__) == TIM_DMABASE_CCR3) || \
+ ((__BASE__) == TIM_DMABASE_CCR4) || \
+ ((__BASE__) == TIM_DMABASE_BDTR) || \
+ ((__BASE__) == TIM_DMABASE_DCR) || \
+ ((__BASE__) == TIM_DMABASE_OR))
+
+#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS))
+
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ICPRESCALER TIM Private macros to SET/RESET TIM Input capture value
+ * @{
+ */
+#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
+ ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8)))
+
+#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\
+ ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_CAPTUREPOLARITY TIM Private macros to SET/RESET TIM capture polarity value
+ * @{
+ */
+#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8)) :\
+ ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12) & TIM_CCER_CC4P)))
+
+#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\
+ ((__HANDLE__)->Instance->CCER &= (uint16_t)~TIM_CCER_CC4P))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* End of private macros -----------------------------------------------------*/
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup TIM_Private_Functions TIM Private Functions
+ * @{
+ */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
+void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler, uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
+
+void HAL_TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
+void HAL_TIM_DMAError(DMA_HandleTypeDef *hdma);
+void HAL_TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+void TIM_ResetCallback(TIM_HandleTypeDef *htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+/* End of private functions --------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_TIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h
new file mode 100644
index 00000000..b5034904
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h
@@ -0,0 +1,661 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_tim_ex.h
+ * @author MCD Application Team
+ * @brief Header file of TIM HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_TIM_EX_H
+#define __STM32F7xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIMEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIM Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Hall sensor Configuration Structure definition
+ */
+
+typedef struct
+{
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+} TIM_HallSensor_InitTypeDef;
+
+/**
+ * @brief TIM Master configuration Structure definition
+ */
+typedef struct {
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection.
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection
+ This parameter can be a value of @ref TIMEx_Master_Mode_Selection_2 */
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection.
+ This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+
+/**
+ * @brief TIM Break input(s) and Dead time configuration Structure definition
+ * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable
+ * filter and polarity.
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode.
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode.
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level.
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time.
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint32_t BreakState; /*!< TIM Break State.
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity.
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t BreakFilter; /*!< Specifies the break input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t Break2State; /*!< TIM Break2 State
+ This parameter can be a value of @ref TIMEx_Break2_Input_enable_disable */
+ uint32_t Break2Polarity; /*!< TIM Break2 input polarity
+ This parameter can be a value of @ref TIMEx_Break2_Polarity */
+ uint32_t Break2Filter; /*!< TIM break2 input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BreakDeadTimeConfigTypeDef;
+
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+/**
+ * @brief TIM Break/Break2 input configuration
+ */
+typedef struct {
+ uint32_t Source; /*!< Specifies the source of the timer break input.
+ This parameter can be a value of @ref TIMEx_Break_Input_Source */
+ uint32_t Enable; /*!< Specifies whether or not the break input source is enabled.
+ This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */
+ uint32_t Polarity; /*!< Specifies the break input source polarity.
+ This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity
+ Not relevant when analog watchdog output of the DFSDM1 used as break input source */
+} TIMEx_BreakInputConfigTypeDef;
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants TIMEx Exported Constants
+ * @{
+ */
+
+/** @defgroup TIMEx_Channel TIMEx Channel
+ * @{
+ */
+
+#define TIM_CHANNEL_1 ((uint32_t)0x0000U)
+#define TIM_CHANNEL_2 ((uint32_t)0x0004U)
+#define TIM_CHANNEL_3 ((uint32_t)0x0008U)
+#define TIM_CHANNEL_4 ((uint32_t)0x000CU)
+#define TIM_CHANNEL_5 ((uint32_t)0x0010U)
+#define TIM_CHANNEL_6 ((uint32_t)0x0014U)
+#define TIM_CHANNEL_ALL ((uint32_t)0x003CU)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Output_Compare_and_PWM_modes TIMEx Output Compare and PWM Modes
+ * @{
+ */
+#define TIM_OCMODE_TIMING ((uint32_t)0x0000U)
+#define TIM_OCMODE_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE ((uint32_t)TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_PWM1 ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM2 ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_FORCED_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_FORCED_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_2)
+
+#define TIM_OCMODE_RETRIGERRABLE_OPM1 ((uint32_t)TIM_CCMR1_OC1M_3)
+#define TIM_OCMODE_RETRIGERRABLE_OPM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_COMBINED_PWM1 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_COMBINED_PWM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_ASSYMETRIC_PWM1 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_ASSYMETRIC_PWM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Remap TIMEx Remap
+ * @{
+ */
+#define TIM_TIM2_TIM8_TRGO (0x00000000U)
+#define TIM_TIM2_ETH_PTP (0x00000400U)
+#define TIM_TIM2_USBFS_SOF (0x00000800U)
+#define TIM_TIM2_USBHS_SOF (0x00000C00U)
+#define TIM_TIM5_GPIO (0x00000000U)
+#define TIM_TIM5_LSI (0x00000040U)
+#define TIM_TIM5_LSE (0x00000080U)
+#define TIM_TIM5_RTC (0x000000C0U)
+#define TIM_TIM11_GPIO (0x00000000U)
+#define TIM_TIM11_SPDIFRX (0x00000001U)
+#define TIM_TIM11_HSE (0x00000002U)
+#define TIM_TIM11_MCO1 (0x00000003U)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_ClearInput_Source TIMEx Clear Input Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x0001U)
+#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break2_Input_enable_disable TIMEx Break input 2 Enable
+ * @{
+ */
+#define TIM_BREAK2_DISABLE ((uint32_t)0x00000000U)
+#define TIM_BREAK2_ENABLE ((uint32_t)TIM_BDTR_BK2E)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break2_Polarity TIMEx Break2 Polarity
+ * @{
+ */
+#define TIM_BREAK2POLARITY_LOW ((uint32_t)0x00000000U)
+#define TIM_BREAK2POLARITY_HIGH (TIM_BDTR_BK2P)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Group_Channel5 TIMEx Group Channel 5 and Channel 1, 2 or 3
+ * @{
+ */
+#define TIM_GROUPCH5_NONE ((uint32_t)0x00000000U) /* !< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */
+#define TIM_GROUPCH5_OC1REFC (TIM_CCR5_GC5C1) /* !< OC1REFC is the logical AND of OC1REFC and OC5REF */
+#define TIM_GROUPCH5_OC2REFC (TIM_CCR5_GC5C2) /* !< OC2REFC is the logical AND of OC2REFC and OC5REF */
+#define TIM_GROUPCH5_OC3REFC (TIM_CCR5_GC5C3) /* !< OC3REFC is the logical AND of OC3REFC and OC5REF */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Master_Mode_Selection_2 TIMEx Master Mode Selection 2 (TRGO2)
+ * @{
+ */
+#define TIM_TRGO2_RESET ((uint32_t)0x00000000U)
+#define TIM_TRGO2_ENABLE ((uint32_t)(TIM_CR2_MMS2_0))
+#define TIM_TRGO2_UPDATE ((uint32_t)(TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC1 ((uint32_t)(TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC1REF ((uint32_t)(TIM_CR2_MMS2_2))
+#define TIM_TRGO2_OC2REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC3REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC4REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC5REF ((uint32_t)(TIM_CR2_MMS2_3))
+#define TIM_TRGO2_OC6REF ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC4REF_RISINGFALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC6REF_RISINGFALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC4REF_RISING_OC6REF_RISING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2))
+#define TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC5REF_RISING_OC6REF_RISING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Slave_Mode TIMEx Slave mode
+ * @{
+ */
+#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x0000U)
+#define TIM_SLAVEMODE_RESET ((uint32_t)(TIM_SMCR_SMS_2))
+#define TIM_SLAVEMODE_GATED ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_TRIGGER ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1))
+#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER ((uint32_t)(TIM_SMCR_SMS_3))
+/**
+ * @}
+ */
+#if defined(STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+/** @defgroup TIMEx_Break_Input TIM Extended Break input
+ * @{
+ */
+#define TIM_BREAKINPUT_BRK ((uint32_t)0x00000001U) /* !< Timer break input */
+#define TIM_BREAKINPUT_BRK2 ((uint32_t)0x00000002U) /* !< Timer break2 input */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source
+ * @{
+ */
+#define TIM_BREAKINPUTSOURCE_BKIN ((uint32_t)0x00000001U) /* !< An external source (GPIO) is connected to the BKIN pin */
+#define TIM_BREAKINPUTSOURCE_DFSDM1 ((uint32_t)0x00000008U) /* !< The analog watchdog output of the DFSDM1 peripheral is connected to the break input */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling
+ * @{
+ */
+#define TIM_BREAKINPUTSOURCE_DISABLE ((uint32_t)0x00000000U) /* !< Break input source is disabled */
+#define TIM_BREAKINPUTSOURCE_ENABLE ((uint32_t)0x00000001U) /* !< Break input source is enabled */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity
+ * @{
+ */
+#define TIM_BREAKINPUTSOURCE_POLARITY_LOW ((uint32_t)(0x00000001)) /* !< Break input source is active low */
+#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH ((uint32_t)(0x00000000)) /* !< Break input source is active_high */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Macros TIMEx Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Sets the TIM Capture Compare Register value on runtime without
+ * calling another time ConfigChannel function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @param __COMPARE__ specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\
+ ((__HANDLE__)->Instance->CCR6 = (__COMPARE__)))
+
+/**
+ * @brief Gets the TIM Capture Compare Register value on runtime
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @arg TIM_CHANNEL_5: get capture/compare 5 register value
+ * @arg TIM_CHANNEL_6: get capture/compare 6 register value
+ * @retval None
+ */
+#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\
+ ((__HANDLE__)->Instance->CCR6))
+
+/**
+ * @brief Sets the TIM Output compare preload.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5PE) :\
+ ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6PE))
+
+/**
+ * @brief Resets the TIM Output compare preload.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC1PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC2PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC3PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC4PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= (uint16_t)~TIM_CCMR3_OC5PE) :\
+ ((__HANDLE__)->Instance->CCMR3 &= (uint16_t)~TIM_CCMR3_OC6PE))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1
+ * @{
+ */
+/* Timer Hall Sensor functions **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef* htim, TIM_HallSensor_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef* htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef* htim);
+
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef* htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef* htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group2
+ * @{
+ */
+/* Timer Complementary Output Compare functions *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group3
+ * @{
+ */
+/* Timer Complementary PWM functions ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group4
+ * @{
+ */
+/* Timer Complementary One Pulse functions **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group5
+ * @{
+ */
+/* Extension Control functions ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef* htim, TIM_MasterConfigTypeDef * sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef* htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, TIMEx_BreakInputConfigTypeDef *sBreakInputConfig);
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef* htim, uint32_t Remap);
+HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t OCRef);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group6
+ * @{
+ */
+/* Extension Callback *********************************************************/
+void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group7
+ * @{
+ */
+/* Extension Peripheral State functions **************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef* htim);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Macros TIMEx Private Macros
+ * @{
+ */
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_5) || \
+ ((CHANNEL) == TIM_CHANNEL_6) || \
+ ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+ ((MODE) == TIM_OCMODE_PWM2) || \
+ ((MODE) == TIM_OCMODE_COMBINED_PWM1) || \
+ ((MODE) == TIM_OCMODE_COMBINED_PWM2) || \
+ ((MODE) == TIM_OCMODE_ASSYMETRIC_PWM1) || \
+ ((MODE) == TIM_OCMODE_ASSYMETRIC_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
+ ((MODE) == TIM_OCMODE_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_TOGGLE) || \
+ ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_FORCED_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \
+ ((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM2))
+#define IS_TIM_REMAP(__TIM_REMAP__) (((__TIM_REMAP__) == TIM_TIM2_TIM8_TRGO)||\
+ ((__TIM_REMAP__) == TIM_TIM2_ETH_PTP)||\
+ ((__TIM_REMAP__) == TIM_TIM2_USBFS_SOF)||\
+ ((__TIM_REMAP__) == TIM_TIM2_USBHS_SOF)||\
+ ((__TIM_REMAP__) == TIM_TIM5_GPIO)||\
+ ((__TIM_REMAP__) == TIM_TIM5_LSI)||\
+ ((__TIM_REMAP__) == TIM_TIM5_LSE)||\
+ ((__TIM_REMAP__) == TIM_TIM5_RTC)||\
+ ((__TIM_REMAP__) == TIM_TIM11_GPIO)||\
+ ((__TIM_REMAP__) == TIM_TIM11_SPDIFRX)||\
+ ((__TIM_REMAP__) == TIM_TIM11_HSE)||\
+ ((__TIM_REMAP__) == TIM_TIM11_MCO1))
+#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFF)
+#define IS_TIM_BREAK_FILTER(__FILTER__) ((__FILTER__) <= 0xF)
+#define IS_TIM_CLEARINPUT_SOURCE(MODE) (((MODE) == TIM_CLEARINPUTSOURCE_ETR) || \
+ ((MODE) == TIM_CLEARINPUTSOURCE_NONE))
+#define IS_TIM_BREAK2_STATE(STATE) (((STATE) == TIM_BREAK2_ENABLE) || \
+ ((STATE) == TIM_BREAK2_DISABLE))
+#define IS_TIM_BREAK2_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAK2POLARITY_LOW) || \
+ ((__POLARITY__) == TIM_BREAK2POLARITY_HIGH))
+#define IS_TIM_GROUPCH5(OCREF) ((((OCREF) & 0x1FFFFFFF) == 0x00000000))
+#define IS_TIM_TRGO2_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO2_RESET) || \
+ ((SOURCE) == TIM_TRGO2_ENABLE) || \
+ ((SOURCE) == TIM_TRGO2_UPDATE) || \
+ ((SOURCE) == TIM_TRGO2_OC1) || \
+ ((SOURCE) == TIM_TRGO2_OC1REF) || \
+ ((SOURCE) == TIM_TRGO2_OC2REF) || \
+ ((SOURCE) == TIM_TRGO2_OC3REF) || \
+ ((SOURCE) == TIM_TRGO2_OC3REF) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF) || \
+ ((SOURCE) == TIM_TRGO2_OC6REF) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISINGFALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC6REF_RISINGFALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING))
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+ ((MODE) == TIM_SLAVEMODE_RESET) || \
+ ((MODE) == TIM_SLAVEMODE_GATED) || \
+ ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+ ((MODE) == TIM_SLAVEMODE_EXTERNAL1) || \
+ ((MODE) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER))
+
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \
+ ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2))
+
+#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \
+ ((__SOURCE__) == TIM_BREAKINPUTSOURCE_DFSDM))
+
+#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \
+ ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE))
+
+#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \
+ ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH))
+
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Functions TIMEx Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h
new file mode 100644
index 00000000..c5b19d09
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h
@@ -0,0 +1,1992 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_ll_bus.h
+ * @author MCD Application Team
+ * @brief Header file of BUS LL module.
+
+ @verbatim
+ ##### RCC Limitations #####
+ ==============================================================================
+ [..]
+ A delay between an RCC peripheral clock enable and the effective peripheral
+ enabling should be taken into account in order to manage the peripheral read/write
+ from/to registers.
+ (+) This delay depends on the peripheral mapping.
+ (++) AHB & APB peripherals, 1 dummy read is necessary
+
+ [..]
+ Workarounds:
+ (#) For AHB & APB peripherals, a dummy read to the peripheral register has been
+ inserted in each LL_{BUS}_GRP{x}_EnableClock() function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_LL_BUS_H
+#define __STM32F7xx_LL_BUS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx.h"
+
+/** @addtogroup STM32F7xx_LL_Driver
+ * @{
+ */
+
+#if defined(RCC)
+
+/** @defgroup BUS_LL BUS
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants
+ * @{
+ */
+
+/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH
+ * @{
+ */
+#define LL_AHB1_GRP1_PERIPH_ALL 0xFFFFFFFFU
+#define LL_AHB1_GRP1_PERIPH_GPIOA RCC_AHB1ENR_GPIOAEN
+#define LL_AHB1_GRP1_PERIPH_GPIOB RCC_AHB1ENR_GPIOBEN
+#define LL_AHB1_GRP1_PERIPH_GPIOC RCC_AHB1ENR_GPIOCEN
+#define LL_AHB1_GRP1_PERIPH_GPIOD RCC_AHB1ENR_GPIODEN
+#define LL_AHB1_GRP1_PERIPH_GPIOE RCC_AHB1ENR_GPIOEEN
+#define LL_AHB1_GRP1_PERIPH_GPIOF RCC_AHB1ENR_GPIOFEN
+#define LL_AHB1_GRP1_PERIPH_GPIOG RCC_AHB1ENR_GPIOGEN
+#define LL_AHB1_GRP1_PERIPH_GPIOH RCC_AHB1ENR_GPIOHEN
+#define LL_AHB1_GRP1_PERIPH_GPIOI RCC_AHB1ENR_GPIOIEN
+#if defined(GPIOJ)
+#define LL_AHB1_GRP1_PERIPH_GPIOJ RCC_AHB1ENR_GPIOJEN
+#endif /* GPIOJ */
+#if defined(GPIOK)
+#define LL_AHB1_GRP1_PERIPH_GPIOK RCC_AHB1ENR_GPIOKEN
+#endif /* GPIOK */
+#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHB1ENR_CRCEN
+#define LL_AHB1_GRP1_PERIPH_BKPSRAM RCC_AHB1ENR_BKPSRAMEN
+#define LL_AHB1_GRP1_PERIPH_DTCMRAM RCC_AHB1ENR_DTCMRAMEN
+#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHB1ENR_DMA1EN
+#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHB1ENR_DMA2EN
+#if defined(DMA2D)
+#define LL_AHB1_GRP1_PERIPH_DMA2D RCC_AHB1ENR_DMA2DEN
+#endif /* DMA2D */
+#if defined(ETH)
+#define LL_AHB1_GRP1_PERIPH_ETHMAC RCC_AHB1ENR_ETHMACEN
+#define LL_AHB1_GRP1_PERIPH_ETHMACTX RCC_AHB1ENR_ETHMACTXEN
+#define LL_AHB1_GRP1_PERIPH_ETHMACRX RCC_AHB1ENR_ETHMACRXEN
+#define LL_AHB1_GRP1_PERIPH_ETHMACPTP RCC_AHB1ENR_ETHMACPTPEN
+#endif /* ETH */
+#define LL_AHB1_GRP1_PERIPH_OTGHS RCC_AHB1ENR_OTGHSEN
+#define LL_AHB1_GRP1_PERIPH_OTGHSULPI RCC_AHB1ENR_OTGHSULPIEN
+#define LL_AHB1_GRP1_PERIPH_AXI RCC_AHB1LPENR_AXILPEN
+#define LL_AHB1_GRP1_PERIPH_FLITF RCC_AHB1LPENR_FLITFLPEN
+#define LL_AHB1_GRP1_PERIPH_SRAM1 RCC_AHB1LPENR_SRAM1LPEN
+#define LL_AHB1_GRP1_PERIPH_SRAM2 RCC_AHB1LPENR_SRAM2LPEN
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH AHB2 GRP1 PERIPH
+ * @{
+ */
+#define LL_AHB2_GRP1_PERIPH_ALL 0xFFFFFFFFU
+#if defined(DCMI)
+#define LL_AHB2_GRP1_PERIPH_DCMI RCC_AHB2ENR_DCMIEN
+#endif /* DCMI */
+#if defined(JPEG)
+#define LL_AHB2_GRP1_PERIPH_JPEG RCC_AHB2ENR_JPEGEN
+#endif /* JPEG */
+#if defined(CRYP)
+#define LL_AHB2_GRP1_PERIPH_CRYP RCC_AHB2ENR_CRYPEN
+#endif /* CRYP */
+#if defined(AES)
+#define LL_AHB2_GRP1_PERIPH_AES RCC_AHB2ENR_AESEN
+#endif /* AES */
+#if defined(HASH)
+#define LL_AHB2_GRP1_PERIPH_HASH RCC_AHB2ENR_HASHEN
+#endif /* HASH */
+#define LL_AHB2_GRP1_PERIPH_RNG RCC_AHB2ENR_RNGEN
+#define LL_AHB2_GRP1_PERIPH_OTGFS RCC_AHB2ENR_OTGFSEN
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_AHB3_GRP1_PERIPH AHB3 GRP1 PERIPH
+ * @{
+ */
+#define LL_AHB3_GRP1_PERIPH_ALL 0xFFFFFFFFU
+#define LL_AHB3_GRP1_PERIPH_FMC RCC_AHB3ENR_FMCEN
+#define LL_AHB3_GRP1_PERIPH_QSPI RCC_AHB3ENR_QSPIEN
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH
+ * @{
+ */
+#define LL_APB1_GRP1_PERIPH_ALL 0xFFFFFFFFU
+#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN
+#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN
+#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR_TIM4EN
+#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR_TIM5EN
+#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN
+#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN
+#define LL_APB1_GRP1_PERIPH_TIM12 RCC_APB1ENR_TIM12EN
+#define LL_APB1_GRP1_PERIPH_TIM13 RCC_APB1ENR_TIM13EN
+#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1ENR_TIM14EN
+#define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APB1ENR_LPTIM1EN
+#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN
+#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN
+#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR_SPI3EN
+#if defined(SPDIFRX)
+#define LL_APB1_GRP1_PERIPH_SPDIFRX RCC_APB1ENR_SPDIFRXEN
+#endif /* SPDIFRX */
+#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN
+#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR_USART3EN
+#define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1ENR_UART4EN
+#define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1ENR_UART5EN
+#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN
+#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN
+#define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1ENR_I2C3EN
+#if defined(I2C4)
+#define LL_APB1_GRP1_PERIPH_I2C4 RCC_APB1ENR_I2C4EN
+#endif /* I2C4 */
+#define LL_APB1_GRP1_PERIPH_CAN1 RCC_APB1ENR_CAN1EN
+#if defined(CAN2)
+#define LL_APB1_GRP1_PERIPH_CAN2 RCC_APB1ENR_CAN2EN
+#endif /* CAN2 */
+#if defined(CAN3)
+#define LL_APB1_GRP1_PERIPH_CAN3 RCC_APB1ENR_CAN3EN
+#endif /* CAN3 */
+#if defined(CEC)
+#define LL_APB1_GRP1_PERIPH_CEC RCC_APB1ENR_CECEN
+#endif /* CEC */
+#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN
+#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR_DACEN
+#define LL_APB1_GRP1_PERIPH_UART7 RCC_APB1ENR_UART7EN
+#define LL_APB1_GRP1_PERIPH_UART8 RCC_APB1ENR_UART8EN
+#if defined(RCC_APB1ENR_RTCEN)
+#define LL_APB1_GRP1_PERIPH_RTCAPB RCC_APB1ENR_RTCEN
+#endif /* RCC_APB1ENR_RTCEN */
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH
+ * @{
+ */
+#define LL_APB2_GRP1_PERIPH_ALL 0xFFFFFFFFU
+#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN
+#define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN
+#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN
+#define LL_APB2_GRP1_PERIPH_USART6 RCC_APB2ENR_USART6EN
+#define LL_APB2_GRP1_PERIPH_ADC1 RCC_APB2ENR_ADC1EN
+#define LL_APB2_GRP1_PERIPH_ADC2 RCC_APB2ENR_ADC2EN
+#define LL_APB2_GRP1_PERIPH_ADC3 RCC_APB2ENR_ADC3EN
+#define LL_APB2_GRP1_PERIPH_SDMMC1 RCC_APB2ENR_SDMMC1EN
+#if defined(SDMMC2)
+#define LL_APB2_GRP1_PERIPH_SDMMC2 RCC_APB2ENR_SDMMC2EN
+#endif /* SDMMC2 */
+#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN
+#define LL_APB2_GRP1_PERIPH_SPI4 RCC_APB2ENR_SPI4EN
+#define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN
+#define LL_APB2_GRP1_PERIPH_TIM9 RCC_APB2ENR_TIM9EN
+#define LL_APB2_GRP1_PERIPH_TIM10 RCC_APB2ENR_TIM10EN
+#define LL_APB2_GRP1_PERIPH_TIM11 RCC_APB2ENR_TIM11EN
+#define LL_APB2_GRP1_PERIPH_SPI5 RCC_APB2ENR_SPI5EN
+#if defined(SPI6)
+#define LL_APB2_GRP1_PERIPH_SPI6 RCC_APB2ENR_SPI6EN
+#endif /* SPI6 */
+#define LL_APB2_GRP1_PERIPH_SAI1 RCC_APB2ENR_SAI1EN
+#define LL_APB2_GRP1_PERIPH_SAI2 RCC_APB2ENR_SAI2EN
+#if defined(LTDC)
+#define LL_APB2_GRP1_PERIPH_LTDC RCC_APB2ENR_LTDCEN
+#endif /* LTDC */
+#if defined(DSI)
+#define LL_APB2_GRP1_PERIPH_DSI RCC_APB2ENR_DSIEN
+#endif /* DSI */
+#if defined(DFSDM1_Channel0)
+#define LL_APB2_GRP1_PERIPH_DFSDM1 RCC_APB2ENR_DFSDM1EN
+#endif /* DFSDM1_Channel0 */
+#if defined(MDIOS)
+#define LL_APB2_GRP1_PERIPH_MDIO RCC_APB2ENR_MDIOEN
+#endif /* MDIOS */
+#if defined(USB_HS_PHYC)
+#define LL_APB2_GRP1_PERIPH_OTGPHYC RCC_APB2ENR_OTGPHYCEN
+#endif /* USB_HS_PHYC */
+#define LL_APB2_GRP1_PERIPH_ADC RCC_APB2RSTR_ADCRST
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions
+ * @{
+ */
+
+/** @defgroup BUS_LL_EF_AHB1 AHB1
+ * @{
+ */
+
+/**
+ * @brief Enable AHB1 peripherals clock.
+ * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR GPIOBEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR GPIOCEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR GPIODEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR GPIOEEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR GPIOFEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR GPIOGEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR GPIOHEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR GPIOIEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR GPIOJEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR GPIOKEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR CRCEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR DTCMRAMEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR DMA1EN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR DMA2EN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR DMA2DEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR ETHMACEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR OTGHSEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR OTGHSULPIEN LL_AHB1_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DTCMRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB1ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB1ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if AHB1 peripheral clock is enabled or not
+ * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR GPIOBEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR GPIOCEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR GPIODEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR GPIOEEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR GPIOFEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR GPIOGEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR GPIOHEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR GPIOIEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR GPIOJEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR GPIOKEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR DTCMRAMEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR DMA2DEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR ETHMACEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR OTGHSEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR OTGHSULPIENDEN LL_AHB1_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DTCMRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->AHB1ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable AHB1 peripherals clock.
+ * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR GPIOBEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR GPIOCEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR GPIODEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR GPIOEEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR GPIOFEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR GPIOGEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR GPIOHEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR GPIOIEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR GPIOJEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR GPIOKEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR CRCEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR DTCMRAMEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR DMA1EN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR DMA2EN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR DMA2DEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR ETHMACEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR OTGHSEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR OTGHSULPIENDEN LL_AHB1_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DTCMRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB1ENR, Periphs);
+}
+
+/**
+ * @brief Force AHB1 peripherals reset.
+ * @rmtoll AHB1RSTR GPIOARST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR GPIOBRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR GPIOCRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR GPIODRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR GPIOERST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR GPIOFRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR GPIOGRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR GPIOHRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR GPIOIRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR GPIOJRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR GPIOKRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR CRCRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR DMA1RST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR DMA2RST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR DMA2DRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR ETHMACRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR OTGHSRST LL_AHB1_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->AHB1RSTR, Periphs);
+}
+
+/**
+ * @brief Release AHB1 peripherals reset.
+ * @rmtoll AHB1RSTR GPIOARST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR GPIOBRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR GPIOCRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR GPIODRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR GPIOERST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR GPIOFRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR GPIOGRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR GPIOHRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR GPIOIRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR GPIOJRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR GPIOKRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR DMA2RST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR DMA2DRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR ETHMACRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR OTGHSRST LL_AHB1_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB1RSTR, Periphs);
+}
+
+/**
+ * @brief Enable AHB1 peripheral clocks in low-power mode
+ * @rmtoll AHB1LPENR GPIOALPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR GPIOBLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR GPIOCLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR GPIODLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR GPIOELPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR GPIOFLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR GPIOGLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR GPIOHLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR GPIOILPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR GPIOJLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR GPIOKLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR CRCLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR AXILPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR FLITFLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR SRAM1LPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR SRAM2LPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR DTCMRAMLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR DMA1LPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR DMA2DLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR ETHMACLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR ETHMACTXLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR ETHMACRXLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR ETHMACPTPLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR OTGHSLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR OTGHSULPILPEN LL_AHB1_GRP1_EnableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_AXI
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLITF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DTCMRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_EnableClockLowPower(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB1LPENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB1LPENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable AHB1 peripheral clocks in low-power mode
+ * @rmtoll AHB1LPENR GPIOALPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR GPIOBLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR GPIOCLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR GPIODLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR GPIOELPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR GPIOFLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR GPIOGLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR GPIOHLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR GPIOILPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR GPIOJLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR GPIOKLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR CRCLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR AXILPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR FLITFLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR SRAM1LPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR SRAM2LPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR DTCMRAMLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR DMA1LPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR DMA2DLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR ETHMACLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR ETHMACTXLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR ETHMACRXLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR ETHMACPTPLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR OTGHSLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR OTGHSULPILPEN LL_AHB1_GRP1_DisableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_AXI
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLITF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DTCMRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_DisableClockLowPower(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB1LPENR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_AHB2 AHB2
+ * @{
+ */
+
+/**
+ * @brief Enable AHB2 peripherals clock.
+ * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR JPEGEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR CRYPEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR AESEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR HASHEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR RNGEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR OTGFSEN LL_AHB2_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_JPEG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB2ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB2ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if AHB2 peripheral clock is enabled or not
+ * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR JPEGEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR CRYPEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR AESEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR HASHEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR RNGEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR OTGFSEN LL_AHB2_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_JPEG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->AHB2ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable AHB2 peripherals clock.
+ * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR JPEGEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR CRYPEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR AESEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR HASHEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR RNGEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR OTGFSEN LL_AHB2_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_JPEG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB2ENR, Periphs);
+}
+
+/**
+ * @brief Force AHB2 peripherals reset.
+ * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR JPEGRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR CRYPRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR AESRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR HASHRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR RNGRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_JPEG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->AHB2RSTR, Periphs);
+}
+
+/**
+ * @brief Release AHB2 peripherals reset.
+ * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR JPEGRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR CRYPRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR AESRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR HASHRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR RNGRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_JPEG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB2RSTR, Periphs);
+}
+
+/**
+ * @brief Enable AHB2 peripheral clocks in low-power mode
+ * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_EnableClockLowPower\n
+ * AHB2LPENR JPEGLPEN LL_AHB2_GRP1_EnableClockLowPower\n
+ * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_EnableClockLowPower\n
+ * AHB2LPENR AESLPEN LL_AHB2_GRP1_EnableClockLowPower\n
+ * AHB2LPENR HASHLPEN LL_AHB2_GRP1_EnableClockLowPower\n
+ * AHB2LPENR RNGLPEN LL_AHB2_GRP1_EnableClockLowPower\n
+ * AHB2LPENR OTGFSLPEN LL_AHB2_GRP1_EnableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_JPEG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_EnableClockLowPower(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB2LPENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB2LPENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable AHB2 peripheral clocks in low-power mode
+ * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_DisableClockLowPower\n
+ * AHB2LPENR JPEGLPEN LL_AHB2_GRP1_DisableClockLowPower\n
+ * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_DisableClockLowPower\n
+ * AHB2LPENR AESLPEN LL_AHB2_GRP1_DisableClockLowPower\n
+ * AHB2LPENR HASHLPEN LL_AHB2_GRP1_DisableClockLowPower\n
+ * AHB2LPENR RNGLPEN LL_AHB2_GRP1_DisableClockLowPower\n
+ * AHB2LPENR OTGFSLPEN LL_AHB2_GRP1_DisableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_JPEG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_DisableClockLowPower(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB2LPENR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_AHB3 AHB3
+ * @{
+ */
+
+/**
+ * @brief Enable AHB3 peripherals clock.
+ * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_EnableClock\n
+ * AHB3ENR QSPIEN LL_AHB3_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB3ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB3ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if AHB3 peripheral clock is enabled or not
+ * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_IsEnabledClock\n
+ * AHB3ENR QSPIEN LL_AHB3_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->AHB3ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable AHB3 peripherals clock.
+ * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_DisableClock\n
+ * AHB3ENR QSPIEN LL_AHB3_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB3ENR, Periphs);
+}
+
+/**
+ * @brief Force AHB3 peripherals reset.
+ * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ForceReset\n
+ * AHB3RSTR QSPIRST LL_AHB3_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->AHB3RSTR, Periphs);
+}
+
+/**
+ * @brief Release AHB3 peripherals reset.
+ * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ReleaseReset\n
+ * AHB3RSTR QSPIRST LL_AHB3_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB3RSTR, Periphs);
+}
+
+/**
+ * @brief Enable AHB3 peripheral clocks in low-power mode
+ * @rmtoll AHB3LPENR FMCLPEN LL_AHB3_GRP1_EnableClockLowPower\n
+ * AHB3LPENR QSPILPEN LL_AHB3_GRP1_EnableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_EnableClockLowPower(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB3LPENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB3LPENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable AHB3 peripheral clocks in low-power mode
+ * @rmtoll AHB3LPENR FMCLPEN LL_AHB3_GRP1_DisableClockLowPower\n
+ * AHB3LPENR QSPILPEN LL_AHB3_GRP1_DisableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_DisableClockLowPower(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB3LPENR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_APB1 APB1
+ * @{
+ */
+
+/**
+ * @brief Enable APB1 peripherals clock.
+ * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM4EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM5EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM6EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM7EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM12EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM13EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM14EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR LPTIM1EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR WWDGEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR SPI2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR SPI3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR SPDIFRXEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR USART2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR USART3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR UART4EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR UART5EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR I2C1EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR I2C2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR I2C3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR I2C4EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR CAN1EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR CAN2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR CAN3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR CECEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR PWREN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR DACEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR UART7EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR UART8EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR RTCEN LL_APB1_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM12
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM13
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART7
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART8
+ * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB1ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB1ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if APB1 peripheral clock is enabled or not
+ * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM4EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM5EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM12EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM13EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR LPTIM1EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR WWDGEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR SPI3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR SPDIFRXEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR USART2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR USART3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR UART4EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR UART5EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR I2C3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR I2C4EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR CAN1EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR CAN2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR CAN3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR CECEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR PWREN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR DACEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR UART7EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR UART8EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR RTCEN LL_APB1_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM12
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM13
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART7
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART8
+ * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->APB1ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable APB1 peripherals clock.
+ * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM4EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM5EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM6EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM7EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM12EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM13EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM14EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR LPTIM1EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR WWDGEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR SPI2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR SPI3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR SPDIFRXEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR USART2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR USART3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR UART4EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR UART5EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR I2C1EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR I2C2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR I2C3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR I2C4EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR CAN1EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR CAN2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR CAN3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR CECEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR PWREN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR DACEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR UART7EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR UART8EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR RTCEN LL_APB1_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM12
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM13
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART7
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART8
+ * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1ENR, Periphs);
+}
+
+/**
+ * @brief Force APB1 peripherals reset.
+ * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM4RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM5RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM6RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM7RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM12RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM13RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM14RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR LPTIM1RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR WWDGRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR SPI2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR SPI3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR SPDIFRXRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR USART2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR USART3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR UART4RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR UART5RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR I2C3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR I2C4RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR CAN1RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR CAN2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR CAN3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR CECRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR PWRRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR DACRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR UART7RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR UART8RST LL_APB1_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM12
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM13
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART7
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART8
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->APB1RSTR, Periphs);
+}
+
+/**
+ * @brief Release APB1 peripherals reset.
+ * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM4RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM5RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM12RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM13RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR LPTIM1RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR WWDGRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR SPI3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR SPDIFRXRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR USART2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR USART3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR UART4RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR UART5RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR I2C3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR I2C4RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR CAN1RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR CAN2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR CAN3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR CECRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR PWRRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR DACRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR UART7RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR UART8RST LL_APB1_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM12
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM13
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART7
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART8
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1RSTR, Periphs);
+}
+
+/**
+ * @brief Enable APB1 peripheral clocks in low-power mode
+ * @rmtoll APB1LPENR TIM2LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR TIM3LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR TIM4LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR TIM5LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR TIM6LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR TIM7LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR TIM12LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR TIM13LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR TIM14LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR LPTIM1LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR WWDGLPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR SPI2LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR SPI3LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR SPDIFRXLPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR USART2LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR USART3LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR UART4LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR UART5LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR I2C1LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR I2C2LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR I2C3LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR I2C4LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR CAN1LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR CAN2LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR CAN3LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR CECLPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR PWRLPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR DACLPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR UART7LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR UART8LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR RTCLPEN LL_APB1_GRP1_EnableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM12
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM13
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART7
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART8
+ * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_EnableClockLowPower(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB1LPENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB1LPENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable APB1 peripheral clocks in low-power mode
+ * @rmtoll APB1LPENR TIM2LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR TIM3LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR TIM4LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR TIM5LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR TIM6LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR TIM7LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR TIM12LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR TIM13LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR TIM14LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR LPTIM1LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR WWDGLPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR SPI2LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR SPI3LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR SPDIFRXLPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR USART2LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR USART3LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR UART4LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR UART5LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR I2C1LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR I2C2LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR I2C3LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR I2C4LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR CAN1LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR CAN2LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR CAN3LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR CECLPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR PWRLPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR DACLPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR UART7LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR UART8LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR RTCLPEN LL_APB1_GRP1_DisableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM12
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM13
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART7
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART8
+ * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_DisableClockLowPower(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1LPENR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_APB2 APB2
+ * @{
+ */
+
+/**
+ * @brief Enable APB2 peripherals clock.
+ * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR USART6EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR ADC1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR ADC2EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR ADC3EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SDMMC1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SDMMC2EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SPI4EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SYSCFGEN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM9EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM10EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM11EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SPI5EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SPI6EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SAI1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SAI2EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR LTDCEN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR DSIEN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR DFSDM1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR MDIOEN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR OTGPHYCEN LL_APB2_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART6
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC1
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC2
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC3
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI4
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM9
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM10
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM11
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI5
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2
+ * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_MDIO (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_OTGPHYC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB2ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB2ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if APB2 peripheral clock is enabled or not
+ * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR USART6EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR ADC1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR ADC2EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR ADC3EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SDMMC1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SDMMC2EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SPI4EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM9EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM10EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM11EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SPI5EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SPI6EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SAI1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SAI2EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR LTDCEN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR DSIEN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR DFSDM1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR MDIOEN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR OTGPHYCEN LL_APB2_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART6
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC1
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC2
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC3
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI4
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM9
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM10
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM11
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI5
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2
+ * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_MDIO (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_OTGPHYC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable APB2 peripherals clock.
+ * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR USART6EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR ADC1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR ADC2EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR ADC3EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SDMMC1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SDMMC2EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SPI4EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SYSCFGEN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM9EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM10EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM11EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SPI5EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SPI6EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SAI1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SAI2EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR LTDCEN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR DSIEN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR DFSDM1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR MDIOEN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR OTGPHYCEN LL_APB2_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART6
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC1
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC2
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC3
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI4
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM9
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM10
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM11
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI5
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2
+ * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_MDIO (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_OTGPHYC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB2ENR, Periphs);
+}
+
+/**
+ * @brief Force APB2 peripherals reset.
+ * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR USART6RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR ADCRST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SDMMC1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SDMMC2RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SPI4RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SYSCFGRST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM9RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM10RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM11RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SPI5RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SPI6RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SAI1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SAI2RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR LTDCRST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR DSIRST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR DFSDM1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR MDIORST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR OTGPHYCRST LL_APB2_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART6
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI4
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM9
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM10
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM11
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI5
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2
+ * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_MDIO (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_OTGPHYC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->APB2RSTR, Periphs);
+}
+
+/**
+ * @brief Release APB2 peripherals reset.
+ * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM8RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR USART6RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR ADCRST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SDMMC1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SDMMC2RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SPI4RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SYSCFGRST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM9RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM10RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM11RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SPI5RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SPI6RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SAI1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SAI2RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR LTDCRST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR DSIRST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR DFSDM1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR MDIORST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR OTGPHYCRST LL_APB2_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART6
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI4
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM9
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM10
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM11
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI5
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2
+ * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_MDIO (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_OTGPHYC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB2RSTR, Periphs);
+}
+
+/**
+ * @brief Enable APB2 peripheral clocks in low-power mode
+ * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR TIM8LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR USART1LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR USART6LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR ADC1LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR ADC2LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR ADC3LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR SDMMC1LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR SDMMC2LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR SPI1LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR SPI4LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR SYSCFGLPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR TIM9LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR TIM10LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR TIM11LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR SPI5LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR SPI6LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR SAI1LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR SAI2LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR LTDCLPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR DSILPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR DFSDM1LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR MDIOLPEN LL_APB2_GRP1_EnableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART6
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC1
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC2
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC3
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI4
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM9
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM10
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM11
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI5
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2
+ * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_MDIO (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_EnableClockLowPower(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB2LPENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB2LPENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable APB2 peripheral clocks in low-power mode
+ * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR TIM8LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR USART1LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR USART6LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR ADC1LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR ADC2LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR ADC3LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR SDMMC1LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR SDMMC2LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR SPI1LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR SPI4LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR SYSCFGLPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR TIM9LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR TIM10LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR TIM11LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR SPI5LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR SPI6LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR SAI1LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR SAI2LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR LTDCLPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR DSILPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR DFSDM1LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR MDIOLPEN LL_APB2_GRP1_DisableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART6
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC1
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC2
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC3
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI4
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM9
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM10
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM11
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI5
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2
+ * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_MDIO (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_DisableClockLowPower(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB2LPENR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(RCC) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_LL_BUS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h
new file mode 100644
index 00000000..37e3fa79
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h
@@ -0,0 +1,655 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_ll_cortex.h
+ * @author MCD Application Team
+ * @brief Header file of CORTEX LL module.
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The LL CORTEX driver contains a set of generic APIs that can be
+ used by user:
+ (+) SYSTICK configuration used by @ref LL_mDelay and @ref LL_Init1msTick
+ functions
+ (+) Low power mode configuration (SCB register of Cortex-MCU)
+ (+) MPU API to configure and enable regions
+ (+) API to access to MCU info (CPUID register)
+ (+) API to enable fault handler (SHCSR accesses)
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_LL_CORTEX_H
+#define __STM32F7xx_LL_CORTEX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx.h"
+
+/** @addtogroup STM32F7xx_LL_Driver
+ * @{
+ */
+
+/** @defgroup CORTEX_LL CORTEX
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants
+ * @{
+ */
+
+/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source
+ * @{
+ */
+#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U /*!< AHB clock divided by 8 selected as SysTick clock source.*/
+#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick clock source. */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EC_FAULT Handler Fault type
+ * @{
+ */
+#define LL_HANDLER_FAULT_USG SCB_SHCSR_USGFAULTENA_Msk /*!< Usage fault */
+#define LL_HANDLER_FAULT_BUS SCB_SHCSR_BUSFAULTENA_Msk /*!< Bus fault */
+#define LL_HANDLER_FAULT_MEM SCB_SHCSR_MEMFAULTENA_Msk /*!< Memory management fault */
+/**
+ * @}
+ */
+
+#if __MPU_PRESENT
+
+/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control
+ * @{
+ */
+#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE 0x00000000U /*!< Disable NMI and privileged SW access */
+#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */
+#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */
+#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EC_REGION MPU Region Number
+ * @{
+ */
+#define LL_MPU_REGION_NUMBER0 0x00U /*!< REGION Number 0 */
+#define LL_MPU_REGION_NUMBER1 0x01U /*!< REGION Number 1 */
+#define LL_MPU_REGION_NUMBER2 0x02U /*!< REGION Number 2 */
+#define LL_MPU_REGION_NUMBER3 0x03U /*!< REGION Number 3 */
+#define LL_MPU_REGION_NUMBER4 0x04U /*!< REGION Number 4 */
+#define LL_MPU_REGION_NUMBER5 0x05U /*!< REGION Number 5 */
+#define LL_MPU_REGION_NUMBER6 0x06U /*!< REGION Number 6 */
+#define LL_MPU_REGION_NUMBER7 0x07U /*!< REGION Number 7 */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size
+ * @{
+ */
+#define LL_MPU_REGION_SIZE_32B (0x04U << MPU_RASR_SIZE_Pos) /*!< 32B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_64B (0x05U << MPU_RASR_SIZE_Pos) /*!< 64B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_128B (0x06U << MPU_RASR_SIZE_Pos) /*!< 128B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_256B (0x07U << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_512B (0x08U << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_1KB (0x09U << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_2KB (0x0AU << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_4KB (0x0BU << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_8KB (0x0CU << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_16KB (0x0DU << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_32KB (0x0EU << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_64KB (0x0FU << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_128KB (0x10U << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_256KB (0x11U << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_512KB (0x12U << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_1MB (0x13U << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_2MB (0x14U << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_4MB (0x15U << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_8MB (0x16U << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_16MB (0x17U << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_32MB (0x18U << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_64MB (0x19U << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_128MB (0x1AU << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_256MB (0x1BU << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_512MB (0x1CU << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_1GB (0x1DU << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_2GB (0x1EU << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_4GB (0x1FU << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges
+ * @{
+ */
+#define LL_MPU_REGION_NO_ACCESS (0x00U << MPU_RASR_AP_Pos) /*!< No access*/
+#define LL_MPU_REGION_PRIV_RW (0x01U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/
+#define LL_MPU_REGION_PRIV_RW_URO (0x02U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */
+#define LL_MPU_REGION_FULL_ACCESS (0x03U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */
+#define LL_MPU_REGION_PRIV_RO (0x05U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/
+#define LL_MPU_REGION_PRIV_RO_URO (0x06U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level
+ * @{
+ */
+#define LL_MPU_TEX_LEVEL0 (0x00U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */
+#define LL_MPU_TEX_LEVEL1 (0x01U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */
+#define LL_MPU_TEX_LEVEL2 (0x02U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */
+#define LL_MPU_TEX_LEVEL4 (0x04U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access
+ * @{
+ */
+#define LL_MPU_INSTRUCTION_ACCESS_ENABLE 0x00U /*!< Instruction fetches enabled */
+#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access
+ * @{
+ */
+#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */
+#define LL_MPU_ACCESS_NOT_SHAREABLE 0x00U /*!< Not Shareable memory attribute */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access
+ * @{
+ */
+#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */
+#define LL_MPU_ACCESS_NOT_CACHEABLE 0x00U /*!< Not Cacheable memory attribute */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access
+ * @{
+ */
+#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */
+#define LL_MPU_ACCESS_NOT_BUFFERABLE 0x00U /*!< Not Bufferable memory attribute */
+/**
+ * @}
+ */
+#endif /* __MPU_PRESENT */
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions
+ * @{
+ */
+
+/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK
+ * @{
+ */
+
+/**
+ * @brief This function checks if the Systick counter flag is active or not.
+ * @note It can be used in timeout function on application side.
+ * @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void)
+{
+ return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk));
+}
+
+/**
+ * @brief Configures the SysTick clock source
+ * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
+ * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source)
+{
+ if (Source == LL_SYSTICK_CLKSOURCE_HCLK)
+ {
+ SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
+ }
+ else
+ {
+ CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
+ }
+}
+
+/**
+ * @brief Get the SysTick clock source
+ * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
+ * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
+ */
+__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void)
+{
+ return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
+}
+
+/**
+ * @brief Enable SysTick exception request
+ * @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSTICK_EnableIT(void)
+{
+ SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
+}
+
+/**
+ * @brief Disable SysTick exception request
+ * @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSTICK_DisableIT(void)
+{
+ CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
+}
+
+/**
+ * @brief Checks if the SYSTICK interrupt is enabled or disabled.
+ * @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void)
+{
+ return (READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE
+ * @{
+ */
+
+/**
+ * @brief Processor uses sleep as its low power mode
+ * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPM_EnableSleep(void)
+{
+ /* Clear SLEEPDEEP bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+}
+
+/**
+ * @brief Processor uses deep sleep as its low power mode
+ * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPM_EnableDeepSleep(void)
+{
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+}
+
+/**
+ * @brief Configures sleep-on-exit when returning from Handler mode to Thread mode.
+ * @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an
+ * empty main application.
+ * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void)
+{
+ /* Set SLEEPONEXIT bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+ * @brief Do not sleep when returning to Thread mode.
+ * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void)
+{
+ /* Clear SLEEPONEXIT bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+ * @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the
+ * processor.
+ * @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPM_EnableEventOnPend(void)
+{
+ /* Set SEVEONPEND bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+ * @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are
+ * excluded
+ * @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPM_DisableEventOnPend(void)
+{
+ /* Clear SEVEONPEND bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EF_HANDLER HANDLER
+ * @{
+ */
+
+/**
+ * @brief Enable a fault in System handler control register (SHCSR)
+ * @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_EnableFault
+ * @param Fault This parameter can be a combination of the following values:
+ * @arg @ref LL_HANDLER_FAULT_USG
+ * @arg @ref LL_HANDLER_FAULT_BUS
+ * @arg @ref LL_HANDLER_FAULT_MEM
+ * @retval None
+ */
+__STATIC_INLINE void LL_HANDLER_EnableFault(uint32_t Fault)
+{
+ /* Enable the system handler fault */
+ SET_BIT(SCB->SHCSR, Fault);
+}
+
+/**
+ * @brief Disable a fault in System handler control register (SHCSR)
+ * @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_DisableFault
+ * @param Fault This parameter can be a combination of the following values:
+ * @arg @ref LL_HANDLER_FAULT_USG
+ * @arg @ref LL_HANDLER_FAULT_BUS
+ * @arg @ref LL_HANDLER_FAULT_MEM
+ * @retval None
+ */
+__STATIC_INLINE void LL_HANDLER_DisableFault(uint32_t Fault)
+{
+ /* Disable the system handler fault */
+ CLEAR_BIT(SCB->SHCSR, Fault);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO
+ * @{
+ */
+
+/**
+ * @brief Get Implementer code
+ * @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer
+ * @retval Value should be equal to 0x41 for ARM
+ */
+__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void)
+{
+ return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos);
+}
+
+/**
+ * @brief Get Variant number (The r value in the rnpn product revision identifier)
+ * @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant
+ * @retval Value between 0 and 255 (0x0: revision 0)
+ */
+__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void)
+{
+ return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos);
+}
+
+/**
+ * @brief Get Constant number
+ * @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetConstant
+ * @retval Value should be equal to 0xF for Cortex-M7 devices
+ */
+__STATIC_INLINE uint32_t LL_CPUID_GetConstant(void)
+{
+ return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos);
+}
+
+/**
+ * @brief Get Part number
+ * @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo
+ * @retval Value should be equal to 0xC27 for Cortex-M7
+ */
+__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void)
+{
+ return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos);
+}
+
+/**
+ * @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release)
+ * @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision
+ * @retval Value between 0 and 255 (0x1: patch 1)
+ */
+__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void)
+{
+ return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos);
+}
+
+/**
+ * @}
+ */
+
+#if __MPU_PRESENT
+/** @defgroup CORTEX_LL_EF_MPU MPU
+ * @{
+ */
+
+/**
+ * @brief Enable MPU with input options
+ * @rmtoll MPU_CTRL ENABLE LL_MPU_Enable
+ * @param Options This parameter can be one of the following values:
+ * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE
+ * @arg @ref LL_MPU_CTRL_HARDFAULT_NMI
+ * @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT
+ * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF
+ * @retval None
+ */
+__STATIC_INLINE void LL_MPU_Enable(uint32_t Options)
+{
+ /* Enable the MPU*/
+ WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options));
+ /* Ensure MPU settings take effects */
+ __DSB();
+ /* Sequence instruction fetches using update settings */
+ __ISB();
+}
+
+/**
+ * @brief Disable MPU
+ * @rmtoll MPU_CTRL ENABLE LL_MPU_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_MPU_Disable(void)
+{
+ /* Make sure outstanding transfers are done */
+ __DMB();
+ /* Disable MPU*/
+ WRITE_REG(MPU->CTRL, 0U);
+}
+
+/**
+ * @brief Check if MPU is enabled or not
+ * @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void)
+{
+ return (READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk));
+}
+
+/**
+ * @brief Enable a MPU region
+ * @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion
+ * @param Region This parameter can be one of the following values:
+ * @arg @ref LL_MPU_REGION_NUMBER0
+ * @arg @ref LL_MPU_REGION_NUMBER1
+ * @arg @ref LL_MPU_REGION_NUMBER2
+ * @arg @ref LL_MPU_REGION_NUMBER3
+ * @arg @ref LL_MPU_REGION_NUMBER4
+ * @arg @ref LL_MPU_REGION_NUMBER5
+ * @arg @ref LL_MPU_REGION_NUMBER6
+ * @arg @ref LL_MPU_REGION_NUMBER7
+ * @retval None
+ */
+__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region)
+{
+ /* Set Region number */
+ WRITE_REG(MPU->RNR, Region);
+ /* Enable the MPU region */
+ SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
+}
+
+/**
+ * @brief Configure and enable a region
+ * @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n
+ * MPU_RBAR REGION LL_MPU_ConfigRegion\n
+ * MPU_RBAR ADDR LL_MPU_ConfigRegion\n
+ * MPU_RASR XN LL_MPU_ConfigRegion\n
+ * MPU_RASR AP LL_MPU_ConfigRegion\n
+ * MPU_RASR S LL_MPU_ConfigRegion\n
+ * MPU_RASR C LL_MPU_ConfigRegion\n
+ * MPU_RASR B LL_MPU_ConfigRegion\n
+ * MPU_RASR SIZE LL_MPU_ConfigRegion
+ * @param Region This parameter can be one of the following values:
+ * @arg @ref LL_MPU_REGION_NUMBER0
+ * @arg @ref LL_MPU_REGION_NUMBER1
+ * @arg @ref LL_MPU_REGION_NUMBER2
+ * @arg @ref LL_MPU_REGION_NUMBER3
+ * @arg @ref LL_MPU_REGION_NUMBER4
+ * @arg @ref LL_MPU_REGION_NUMBER5
+ * @arg @ref LL_MPU_REGION_NUMBER6
+ * @arg @ref LL_MPU_REGION_NUMBER7
+ * @param Address Value of region base address
+ * @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF
+ * @param Attributes This parameter can be a combination of the following values:
+ * @arg @ref LL_MPU_REGION_SIZE_32B or @ref LL_MPU_REGION_SIZE_64B or @ref LL_MPU_REGION_SIZE_128B or @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B
+ * or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB
+ * or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB
+ * or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB
+ * or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB
+ * or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB
+ * @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS
+ * or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO
+ * @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4
+ * @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE
+ * @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE
+ * @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE
+ * @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE
+ * @retval None
+ */
+__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes)
+{
+ /* Set Region number */
+ WRITE_REG(MPU->RNR, Region);
+ /* Set base address */
+ WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U));
+ /* Configure MPU */
+ WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | SubRegionDisable << MPU_RASR_SRD_Pos));
+}
+
+/**
+ * @brief Disable a region
+ * @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n
+ * MPU_RASR ENABLE LL_MPU_DisableRegion
+ * @param Region This parameter can be one of the following values:
+ * @arg @ref LL_MPU_REGION_NUMBER0
+ * @arg @ref LL_MPU_REGION_NUMBER1
+ * @arg @ref LL_MPU_REGION_NUMBER2
+ * @arg @ref LL_MPU_REGION_NUMBER3
+ * @arg @ref LL_MPU_REGION_NUMBER4
+ * @arg @ref LL_MPU_REGION_NUMBER5
+ * @arg @ref LL_MPU_REGION_NUMBER6
+ * @arg @ref LL_MPU_REGION_NUMBER7
+ * @retval None
+ */
+__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region)
+{
+ /* Set Region number */
+ WRITE_REG(MPU->RNR, Region);
+ /* Disable the MPU region */
+ CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
+}
+
+/**
+ * @}
+ */
+
+#endif /* __MPU_PRESENT */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_LL_CORTEX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h
new file mode 100644
index 00000000..cbcb3618
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h
@@ -0,0 +1,2909 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_ll_dma.h
+ * @author MCD Application Team
+ * @brief Header file of DMA LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_LL_DMA_H
+#define __STM32F7xx_LL_DMA_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx.h"
+
+/** @addtogroup STM32F7xx_LL_Driver
+ * @{
+ */
+
+#if defined (DMA1) || defined (DMA2)
+
+/** @defgroup DMA_LL DMA
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup DMA_LL_Private_Variables DMA Private Variables
+ * @{
+ */
+/* Array used to get the DMA stream register offset versus stream index LL_DMA_STREAM_x */
+static const uint8_t STREAM_OFFSET_TAB[] =
+{
+ (uint8_t)(DMA1_Stream0_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Stream1_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Stream2_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Stream3_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Stream4_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Stream5_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Stream6_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Stream7_BASE - DMA1_BASE)
+};
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DMA_LL_Private_Constants DMA Private Constants
+ * @{
+ */
+#if defined(DMA_SxCR_CHSEL_3)
+#define DMA_CHANNEL_SELECTION_8_15
+#endif /* DMA_SxCR_CHSEL_3 */
+/**
+ * @}
+ */
+
+
+/* Private macros ------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure
+ * @{
+ */
+typedef struct
+{
+ uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer
+ or as Source base address in case of memory to memory transfer direction.
+
+ This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */
+
+ uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer
+ or as Destination base address in case of memory to memory transfer direction.
+
+ This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */
+
+ uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
+ from memory to memory or from peripheral to memory.
+ This parameter can be a value of @ref DMA_LL_EC_DIRECTION
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */
+
+ uint32_t Mode; /*!< Specifies the normal or circular operation mode.
+ This parameter can be a value of @ref DMA_LL_EC_MODE
+ @note The circular buffer mode cannot be used if the memory to memory
+ data transfer direction is configured on the selected Stream
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */
+
+ uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction
+ is incremented or not.
+ This parameter can be a value of @ref DMA_LL_EC_PERIPH
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */
+
+ uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction
+ is incremented or not.
+ This parameter can be a value of @ref DMA_LL_EC_MEMORY
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */
+
+ uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word)
+ in case of memory to memory transfer direction.
+ This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */
+
+ uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word)
+ in case of memory to memory transfer direction.
+ This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */
+
+ uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit.
+ The data unit is equal to the source buffer configuration set in PeripheralSize
+ or MemorySize parameters depending in the transfer direction.
+ This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */
+
+ uint32_t Channel; /*!< Specifies the peripheral channel.
+ This parameter can be a value of @ref DMA_LL_EC_CHANNEL
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelSelection(). */
+
+ uint32_t Priority; /*!< Specifies the channel priority level.
+ This parameter can be a value of @ref DMA_LL_EC_PRIORITY
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetStreamPriorityLevel(). */
+
+ uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream.
+ This parameter can be a value of @ref DMA_LL_FIFOMODE
+ @note The Direct mode (FIFO mode disabled) cannot be used if the
+ memory-to-memory data transfer is configured on the selected stream
+
+ This feature can be modified afterwards using unitary functions @ref LL_DMA_EnableFifoMode() or @ref LL_DMA_EnableFifoMode() . */
+
+ uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level.
+ This parameter can be a value of @ref DMA_LL_EC_FIFOTHRESHOLD
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetFIFOThreshold(). */
+
+ uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers.
+ It specifies the amount of data to be transferred in a single non interruptible
+ transaction.
+ This parameter can be a value of @ref DMA_LL_EC_MBURST
+ @note The burst mode is possible only if the address Increment mode is enabled.
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryBurstxfer(). */
+
+ uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers.
+ It specifies the amount of data to be transferred in a single non interruptible
+ transaction.
+ This parameter can be a value of @ref DMA_LL_EC_PBURST
+ @note The burst mode is possible only if the address Increment mode is enabled.
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphBurstxfer(). */
+
+} LL_DMA_InitTypeDef;
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants
+ * @{
+ */
+
+/** @defgroup DMA_LL_EC_STREAM STREAM
+ * @{
+ */
+#define LL_DMA_STREAM_0 0x00000000U
+#define LL_DMA_STREAM_1 0x00000001U
+#define LL_DMA_STREAM_2 0x00000002U
+#define LL_DMA_STREAM_3 0x00000003U
+#define LL_DMA_STREAM_4 0x00000004U
+#define LL_DMA_STREAM_5 0x00000005U
+#define LL_DMA_STREAM_6 0x00000006U
+#define LL_DMA_STREAM_7 0x00000007U
+#define LL_DMA_STREAM_ALL 0xFFFF0000U
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_DIRECTION DIRECTION
+ * @{
+ */
+#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */
+#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_SxCR_DIR_0 /*!< Memory to peripheral direction */
+#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_SxCR_DIR_1 /*!< Memory to memory direction */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_MODE MODE
+ * @{
+ */
+#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */
+#define LL_DMA_MODE_CIRCULAR DMA_SxCR_CIRC /*!< Circular Mode */
+#define LL_DMA_MODE_PFCTRL DMA_SxCR_PFCTRL /*!< Peripheral flow control mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_DOUBLEBUFFER_MODE DOUBLE BUFFER MODE
+ * @{
+ */
+#define LL_DMA_DOUBLEBUFFER_MODE_DISABLE 0x00000000U /*!< Disable double buffering mode */
+#define LL_DMA_DOUBLEBUFFER_MODE_ENABLE DMA_SxCR_DBM /*!< Enable double buffering mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_PERIPH PERIPH
+ * @{
+ */
+#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */
+#define LL_DMA_PERIPH_INCREMENT DMA_SxCR_PINC /*!< Peripheral increment mode Enable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_MEMORY MEMORY
+ * @{
+ */
+#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */
+#define LL_DMA_MEMORY_INCREMENT DMA_SxCR_MINC /*!< Memory increment mode Enable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_PDATAALIGN PDATAALIGN
+ * @{
+ */
+#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */
+#define LL_DMA_PDATAALIGN_HALFWORD DMA_SxCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */
+#define LL_DMA_PDATAALIGN_WORD DMA_SxCR_PSIZE_1 /*!< Peripheral data alignment : Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_MDATAALIGN MDATAALIGN
+ * @{
+ */
+#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */
+#define LL_DMA_MDATAALIGN_HALFWORD DMA_SxCR_MSIZE_0 /*!< Memory data alignment : HalfWord */
+#define LL_DMA_MDATAALIGN_WORD DMA_SxCR_MSIZE_1 /*!< Memory data alignment : Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_OFFSETSIZE OFFSETSIZE
+ * @{
+ */
+#define LL_DMA_OFFSETSIZE_PSIZE 0x00000000U /*!< Peripheral increment offset size is linked to the PSIZE */
+#define LL_DMA_OFFSETSIZE_FIXEDTO4 DMA_SxCR_PINCOS /*!< Peripheral increment offset size is fixed to 4 (32-bit alignment) */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_PRIORITY PRIORITY
+ * @{
+ */
+#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */
+#define LL_DMA_PRIORITY_MEDIUM DMA_SxCR_PL_0 /*!< Priority level : Medium */
+#define LL_DMA_PRIORITY_HIGH DMA_SxCR_PL_1 /*!< Priority level : High */
+#define LL_DMA_PRIORITY_VERYHIGH DMA_SxCR_PL /*!< Priority level : Very_High */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_CHANNEL CHANNEL
+ * @{
+ */
+#define LL_DMA_CHANNEL_0 0x00000000U /* Select Channel0 of DMA Instance */
+#define LL_DMA_CHANNEL_1 DMA_SxCR_CHSEL_0 /* Select Channel1 of DMA Instance */
+#define LL_DMA_CHANNEL_2 DMA_SxCR_CHSEL_1 /* Select Channel2 of DMA Instance */
+#define LL_DMA_CHANNEL_3 (DMA_SxCR_CHSEL_0 | DMA_SxCR_CHSEL_1) /* Select Channel3 of DMA Instance */
+#define LL_DMA_CHANNEL_4 DMA_SxCR_CHSEL_2 /* Select Channel4 of DMA Instance */
+#define LL_DMA_CHANNEL_5 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_0) /* Select Channel5 of DMA Instance */
+#define LL_DMA_CHANNEL_6 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1) /* Select Channel6 of DMA Instance */
+#define LL_DMA_CHANNEL_7 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel7 of DMA Instance */
+#if defined(DMA_CHANNEL_SELECTION_8_15)
+#define LL_DMA_CHANNEL_8 DMA_SxCR_CHSEL_3 /* Select Channel8 of DMA Instance */
+#define LL_DMA_CHANNEL_9 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_0) /* Select Channel9 of DMA Instance */
+#define LL_DMA_CHANNEL_10 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_1) /* Select Channel10 of DMA Instance */
+#define LL_DMA_CHANNEL_11 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel11 of DMA Instance */
+#define LL_DMA_CHANNEL_12 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2) /* Select Channel12 of DMA Instance */
+#define LL_DMA_CHANNEL_13 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_0) /* Select Channel13 of DMA Instance */
+#define LL_DMA_CHANNEL_14 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1) /* Select Channel14 of DMA Instance */
+#define LL_DMA_CHANNEL_15 DMA_SxCR_CHSEL /* Select Channel15 of DMA Instance */
+#endif /* DMA_CHANNEL_SELECTION_8_15 */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_MBURST MBURST
+ * @{
+ */
+#define LL_DMA_MBURST_SINGLE 0x00000000U /*!< Memory burst single transfer configuration */
+#define LL_DMA_MBURST_INC4 DMA_SxCR_MBURST_0 /*!< Memory burst of 4 beats transfer configuration */
+#define LL_DMA_MBURST_INC8 DMA_SxCR_MBURST_1 /*!< Memory burst of 8 beats transfer configuration */
+#define LL_DMA_MBURST_INC16 (DMA_SxCR_MBURST_0 | DMA_SxCR_MBURST_1) /*!< Memory burst of 16 beats transfer configuration */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_PBURST PBURST
+ * @{
+ */
+#define LL_DMA_PBURST_SINGLE 0x00000000U /*!< Peripheral burst single transfer configuration */
+#define LL_DMA_PBURST_INC4 DMA_SxCR_PBURST_0 /*!< Peripheral burst of 4 beats transfer configuration */
+#define LL_DMA_PBURST_INC8 DMA_SxCR_PBURST_1 /*!< Peripheral burst of 8 beats transfer configuration */
+#define LL_DMA_PBURST_INC16 (DMA_SxCR_PBURST_0 | DMA_SxCR_PBURST_1) /*!< Peripheral burst of 16 beats transfer configuration */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_FIFOMODE DMA_LL_FIFOMODE
+ * @{
+ */
+#define LL_DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable (direct mode is enabled) */
+#define LL_DMA_FIFOMODE_ENABLE DMA_SxFCR_DMDIS /*!< FIFO mode enable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_FIFOSTATUS_0 FIFOSTATUS 0
+ * @{
+ */
+#define LL_DMA_FIFOSTATUS_0_25 0x00000000U /*!< 0 < fifo_level < 1/4 */
+#define LL_DMA_FIFOSTATUS_25_50 DMA_SxFCR_FS_0 /*!< 1/4 < fifo_level < 1/2 */
+#define LL_DMA_FIFOSTATUS_50_75 DMA_SxFCR_FS_1 /*!< 1/2 < fifo_level < 3/4 */
+#define LL_DMA_FIFOSTATUS_75_100 (DMA_SxFCR_FS_1 | DMA_SxFCR_FS_0) /*!< 3/4 < fifo_level < full */
+#define LL_DMA_FIFOSTATUS_EMPTY DMA_SxFCR_FS_2 /*!< FIFO is empty */
+#define LL_DMA_FIFOSTATUS_FULL (DMA_SxFCR_FS_2 | DMA_SxFCR_FS_0) /*!< FIFO is full */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_FIFOTHRESHOLD FIFOTHRESHOLD
+ * @{
+ */
+#define LL_DMA_FIFOTHRESHOLD_1_4 0x00000000U /*!< FIFO threshold 1 quart full configuration */
+#define LL_DMA_FIFOTHRESHOLD_1_2 DMA_SxFCR_FTH_0 /*!< FIFO threshold half full configuration */
+#define LL_DMA_FIFOTHRESHOLD_3_4 DMA_SxFCR_FTH_1 /*!< FIFO threshold 3 quarts full configuration */
+#define LL_DMA_FIFOTHRESHOLD_FULL DMA_SxFCR_FTH /*!< FIFO threshold full configuration */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_CURRENTTARGETMEM CURRENTTARGETMEM
+ * @{
+ */
+#define LL_DMA_CURRENTTARGETMEM0 0x00000000U /*!< Set CurrentTarget Memory to Memory 0 */
+#define LL_DMA_CURRENTTARGETMEM1 DMA_SxCR_CT /*!< Set CurrentTarget Memory to Memory 1 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros
+ * @{
+ */
+
+/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros
+ * @{
+ */
+/**
+ * @brief Write a value in DMA register
+ * @param __INSTANCE__ DMA Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in DMA register
+ * @param __INSTANCE__ DMA Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxStreamy
+ * @{
+ */
+/**
+ * @brief Convert DMAx_Streamy into DMAx
+ * @param __STREAM_INSTANCE__ DMAx_Streamy
+ * @retval DMAx
+ */
+#define __LL_DMA_GET_INSTANCE(__STREAM_INSTANCE__) \
+(((uint32_t)(__STREAM_INSTANCE__) > ((uint32_t)DMA1_Stream7)) ? DMA2 : DMA1)
+
+/**
+ * @brief Convert DMAx_Streamy into LL_DMA_STREAM_y
+ * @param __STREAM_INSTANCE__ DMAx_Streamy
+ * @retval LL_DMA_CHANNEL_y
+ */
+#define __LL_DMA_GET_STREAM(__STREAM_INSTANCE__) \
+(((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream0)) ? LL_DMA_STREAM_0 : \
+ ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream0)) ? LL_DMA_STREAM_0 : \
+ ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream1)) ? LL_DMA_STREAM_1 : \
+ ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream1)) ? LL_DMA_STREAM_1 : \
+ ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream2)) ? LL_DMA_STREAM_2 : \
+ ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream2)) ? LL_DMA_STREAM_2 : \
+ ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream3)) ? LL_DMA_STREAM_3 : \
+ ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream3)) ? LL_DMA_STREAM_3 : \
+ ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream4)) ? LL_DMA_STREAM_4 : \
+ ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream4)) ? LL_DMA_STREAM_4 : \
+ ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream5)) ? LL_DMA_STREAM_5 : \
+ ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream5)) ? LL_DMA_STREAM_5 : \
+ ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream6)) ? LL_DMA_STREAM_6 : \
+ ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream6)) ? LL_DMA_STREAM_6 : \
+ LL_DMA_STREAM_7)
+
+/**
+ * @brief Convert DMA Instance DMAx and LL_DMA_STREAM_y into DMAx_Streamy
+ * @param __DMA_INSTANCE__ DMAx
+ * @param __STREAM__ LL_DMA_STREAM_y
+ * @retval DMAx_Streamy
+ */
+#define __LL_DMA_GET_STREAM_INSTANCE(__DMA_INSTANCE__, __STREAM__) \
+((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_0))) ? DMA1_Stream0 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_0))) ? DMA2_Stream0 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_1))) ? DMA1_Stream1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_1))) ? DMA2_Stream1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_2))) ? DMA1_Stream2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_2))) ? DMA2_Stream2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_3))) ? DMA1_Stream3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_3))) ? DMA2_Stream3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_4))) ? DMA1_Stream4 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_4))) ? DMA2_Stream4 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_5))) ? DMA1_Stream5 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_5))) ? DMA2_Stream5 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_6))) ? DMA1_Stream6 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_6))) ? DMA2_Stream6 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_7))) ? DMA1_Stream7 : \
+ DMA2_Stream7)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+ /** @defgroup DMA_LL_Exported_Functions DMA Exported Functions
+ * @{
+ */
+
+/** @defgroup DMA_LL_EF_Configuration Configuration
+ * @{
+ */
+/**
+ * @brief Enable DMA stream.
+ * @rmtoll CR EN LL_DMA_EnableStream
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableStream(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_EN);
+}
+
+/**
+ * @brief Disable DMA stream.
+ * @rmtoll CR EN LL_DMA_DisableStream
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableStream(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_EN);
+}
+
+/**
+ * @brief Check if DMA stream is enabled or disabled.
+ * @rmtoll CR EN LL_DMA_IsEnabledStream
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledStream(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_EN) == (DMA_SxCR_EN));
+}
+
+/**
+ * @brief Configure all parameters linked to DMA transfer.
+ * @rmtoll CR DIR LL_DMA_ConfigTransfer\n
+ * CR CIRC LL_DMA_ConfigTransfer\n
+ * CR PINC LL_DMA_ConfigTransfer\n
+ * CR MINC LL_DMA_ConfigTransfer\n
+ * CR PSIZE LL_DMA_ConfigTransfer\n
+ * CR MSIZE LL_DMA_ConfigTransfer\n
+ * CR PL LL_DMA_ConfigTransfer\n
+ * CR PFCTRL LL_DMA_ConfigTransfer
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param Configuration This parameter must be a combination of all the following values:
+ * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+ * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR or @ref LL_DMA_MODE_PFCTRL
+ * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT
+ * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT
+ * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD
+ * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD
+ * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH
+ *@retval None
+ */
+__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Configuration)
+{
+ MODIFY_REG(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR,
+ DMA_SxCR_DIR | DMA_SxCR_CIRC | DMA_SxCR_PINC | DMA_SxCR_MINC | DMA_SxCR_PSIZE | DMA_SxCR_MSIZE | DMA_SxCR_PL | DMA_SxCR_PFCTRL,
+ Configuration);
+}
+
+/**
+ * @brief Set Data transfer direction (read from peripheral or from memory).
+ * @rmtoll CR DIR LL_DMA_SetDataTransferDirection
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param Direction This parameter can be one of the following values:
+ * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Direction)
+{
+ MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DIR, Direction);
+}
+
+/**
+ * @brief Get Data transfer direction (read from peripheral or from memory).
+ * @rmtoll CR DIR LL_DMA_GetDataTransferDirection
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DIR));
+}
+
+/**
+ * @brief Set DMA mode normal, circular or peripheral flow control.
+ * @rmtoll CR CIRC LL_DMA_SetMode\n
+ * CR PFCTRL LL_DMA_SetMode
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param Mode This parameter can be one of the following values:
+ * @arg @ref LL_DMA_MODE_NORMAL
+ * @arg @ref LL_DMA_MODE_CIRCULAR
+ * @arg @ref LL_DMA_MODE_PFCTRL
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Mode)
+{
+ MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CIRC | DMA_SxCR_PFCTRL, Mode);
+}
+
+/**
+ * @brief Get DMA mode normal, circular or peripheral flow control.
+ * @rmtoll CR CIRC LL_DMA_GetMode\n
+ * CR PFCTRL LL_DMA_GetMode
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_MODE_NORMAL
+ * @arg @ref LL_DMA_MODE_CIRCULAR
+ * @arg @ref LL_DMA_MODE_PFCTRL
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CIRC | DMA_SxCR_PFCTRL));
+}
+
+/**
+ * @brief Set Peripheral increment mode.
+ * @rmtoll CR PINC LL_DMA_SetPeriphIncMode
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param IncrementMode This parameter can be one of the following values:
+ * @arg @ref LL_DMA_PERIPH_NOINCREMENT
+ * @arg @ref LL_DMA_PERIPH_INCREMENT
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t IncrementMode)
+{
+ MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINC, IncrementMode);
+}
+
+/**
+ * @brief Get Peripheral increment mode.
+ * @rmtoll CR PINC LL_DMA_GetPeriphIncMode
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_PERIPH_NOINCREMENT
+ * @arg @ref LL_DMA_PERIPH_INCREMENT
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINC));
+}
+
+/**
+ * @brief Set Memory increment mode.
+ * @rmtoll CR MINC LL_DMA_SetMemoryIncMode
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param IncrementMode This parameter can be one of the following values:
+ * @arg @ref LL_DMA_MEMORY_NOINCREMENT
+ * @arg @ref LL_DMA_MEMORY_INCREMENT
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t IncrementMode)
+{
+ MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MINC, IncrementMode);
+}
+
+/**
+ * @brief Get Memory increment mode.
+ * @rmtoll CR MINC LL_DMA_GetMemoryIncMode
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_MEMORY_NOINCREMENT
+ * @arg @ref LL_DMA_MEMORY_INCREMENT
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MINC));
+}
+
+/**
+ * @brief Set Peripheral size.
+ * @rmtoll CR PSIZE LL_DMA_SetPeriphSize
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param Size This parameter can be one of the following values:
+ * @arg @ref LL_DMA_PDATAALIGN_BYTE
+ * @arg @ref LL_DMA_PDATAALIGN_HALFWORD
+ * @arg @ref LL_DMA_PDATAALIGN_WORD
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Size)
+{
+ MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PSIZE, Size);
+}
+
+/**
+ * @brief Get Peripheral size.
+ * @rmtoll CR PSIZE LL_DMA_GetPeriphSize
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_PDATAALIGN_BYTE
+ * @arg @ref LL_DMA_PDATAALIGN_HALFWORD
+ * @arg @ref LL_DMA_PDATAALIGN_WORD
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PSIZE));
+}
+
+/**
+ * @brief Set Memory size.
+ * @rmtoll CR MSIZE LL_DMA_SetMemorySize
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param Size This parameter can be one of the following values:
+ * @arg @ref LL_DMA_MDATAALIGN_BYTE
+ * @arg @ref LL_DMA_MDATAALIGN_HALFWORD
+ * @arg @ref LL_DMA_MDATAALIGN_WORD
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Size)
+{
+ MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MSIZE, Size);
+}
+
+/**
+ * @brief Get Memory size.
+ * @rmtoll CR MSIZE LL_DMA_GetMemorySize
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_MDATAALIGN_BYTE
+ * @arg @ref LL_DMA_MDATAALIGN_HALFWORD
+ * @arg @ref LL_DMA_MDATAALIGN_WORD
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MSIZE));
+}
+
+/**
+ * @brief Set Peripheral increment offset size.
+ * @rmtoll CR PINCOS LL_DMA_SetIncOffsetSize
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param OffsetSize This parameter can be one of the following values:
+ * @arg @ref LL_DMA_OFFSETSIZE_PSIZE
+ * @arg @ref LL_DMA_OFFSETSIZE_FIXEDTO4
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetIncOffsetSize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t OffsetSize)
+{
+ MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINCOS, OffsetSize);
+}
+
+/**
+ * @brief Get Peripheral increment offset size.
+ * @rmtoll CR PINCOS LL_DMA_GetIncOffsetSize
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_OFFSETSIZE_PSIZE
+ * @arg @ref LL_DMA_OFFSETSIZE_FIXEDTO4
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetIncOffsetSize(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINCOS));
+}
+
+/**
+ * @brief Set Stream priority level.
+ * @rmtoll CR PL LL_DMA_SetStreamPriorityLevel
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param Priority This parameter can be one of the following values:
+ * @arg @ref LL_DMA_PRIORITY_LOW
+ * @arg @ref LL_DMA_PRIORITY_MEDIUM
+ * @arg @ref LL_DMA_PRIORITY_HIGH
+ * @arg @ref LL_DMA_PRIORITY_VERYHIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetStreamPriorityLevel(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Priority)
+{
+ MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PL, Priority);
+}
+
+/**
+ * @brief Get Stream priority level.
+ * @rmtoll CR PL LL_DMA_GetStreamPriorityLevel
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_PRIORITY_LOW
+ * @arg @ref LL_DMA_PRIORITY_MEDIUM
+ * @arg @ref LL_DMA_PRIORITY_HIGH
+ * @arg @ref LL_DMA_PRIORITY_VERYHIGH
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetStreamPriorityLevel(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PL));
+}
+
+/**
+ * @brief Set Number of data to transfer.
+ * @rmtoll NDTR NDT LL_DMA_SetDataLength
+ * @note This action has no effect if
+ * stream is enabled.
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param NbData Between 0 to 0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t NbData)
+{
+ MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->NDTR, DMA_SxNDT, NbData);
+}
+
+/**
+ * @brief Get Number of data to transfer.
+ * @rmtoll NDTR NDT LL_DMA_GetDataLength
+ * @note Once the stream is enabled, the return value indicate the
+ * remaining bytes to be transmitted.
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Between 0 to 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef* DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->NDTR, DMA_SxNDT));
+}
+
+/**
+ * @brief Select Channel number associated to the Stream.
+ * @rmtoll CR CHSEL LL_DMA_SetChannelSelection
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_0
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @arg @ref LL_DMA_CHANNEL_8 (*)
+ * @arg @ref LL_DMA_CHANNEL_9 (*)
+ * @arg @ref LL_DMA_CHANNEL_10 (*)
+ * @arg @ref LL_DMA_CHANNEL_11 (*)
+ * @arg @ref LL_DMA_CHANNEL_12 (*)
+ * @arg @ref LL_DMA_CHANNEL_13 (*)
+ * @arg @ref LL_DMA_CHANNEL_14 (*)
+ * @arg @ref LL_DMA_CHANNEL_15 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetChannelSelection(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Channel)
+{
+ MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CHSEL, Channel);
+}
+
+/**
+ * @brief Get the Channel number associated to the Stream.
+ * @rmtoll CR CHSEL LL_DMA_GetChannelSelection
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_0
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @arg @ref LL_DMA_CHANNEL_8 (*)
+ * @arg @ref LL_DMA_CHANNEL_9 (*)
+ * @arg @ref LL_DMA_CHANNEL_10 (*)
+ * @arg @ref LL_DMA_CHANNEL_11 (*)
+ * @arg @ref LL_DMA_CHANNEL_12 (*)
+ * @arg @ref LL_DMA_CHANNEL_13 (*)
+ * @arg @ref LL_DMA_CHANNEL_14 (*)
+ * @arg @ref LL_DMA_CHANNEL_15 (*)
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetChannelSelection(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CHSEL));
+}
+
+/**
+ * @brief Set Memory burst transfer configuration.
+ * @rmtoll CR MBURST LL_DMA_SetMemoryBurstxfer
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param Mburst This parameter can be one of the following values:
+ * @arg @ref LL_DMA_MBURST_SINGLE
+ * @arg @ref LL_DMA_MBURST_INC4
+ * @arg @ref LL_DMA_MBURST_INC8
+ * @arg @ref LL_DMA_MBURST_INC16
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetMemoryBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Mburst)
+{
+ MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MBURST, Mburst);
+}
+
+/**
+ * @brief Get Memory burst transfer configuration.
+ * @rmtoll CR MBURST LL_DMA_GetMemoryBurstxfer
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_MBURST_SINGLE
+ * @arg @ref LL_DMA_MBURST_INC4
+ * @arg @ref LL_DMA_MBURST_INC8
+ * @arg @ref LL_DMA_MBURST_INC16
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetMemoryBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MBURST));
+}
+
+/**
+ * @brief Set Peripheral burst transfer configuration.
+ * @rmtoll CR PBURST LL_DMA_SetPeriphBurstxfer
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param Pburst This parameter can be one of the following values:
+ * @arg @ref LL_DMA_PBURST_SINGLE
+ * @arg @ref LL_DMA_PBURST_INC4
+ * @arg @ref LL_DMA_PBURST_INC8
+ * @arg @ref LL_DMA_PBURST_INC16
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetPeriphBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Pburst)
+{
+ MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PBURST, Pburst);
+}
+
+/**
+ * @brief Get Peripheral burst transfer configuration.
+ * @rmtoll CR PBURST LL_DMA_GetPeriphBurstxfer
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_PBURST_SINGLE
+ * @arg @ref LL_DMA_PBURST_INC4
+ * @arg @ref LL_DMA_PBURST_INC8
+ * @arg @ref LL_DMA_PBURST_INC16
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetPeriphBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PBURST));
+}
+
+/**
+ * @brief Set Current target (only in double buffer mode) to Memory 1 or Memory 0.
+ * @rmtoll CR CT LL_DMA_SetCurrentTargetMem
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param CurrentMemory This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CURRENTTARGETMEM0
+ * @arg @ref LL_DMA_CURRENTTARGETMEM1
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetCurrentTargetMem(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t CurrentMemory)
+{
+ MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CT, CurrentMemory);
+}
+
+/**
+ * @brief Set Current target (only in double buffer mode) to Memory 1 or Memory 0.
+ * @rmtoll CR CT LL_DMA_GetCurrentTargetMem
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_CURRENTTARGETMEM0
+ * @arg @ref LL_DMA_CURRENTTARGETMEM1
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetCurrentTargetMem(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CT));
+}
+
+/**
+ * @brief Enable the double buffer mode.
+ * @rmtoll CR DBM LL_DMA_EnableDoubleBufferMode
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableDoubleBufferMode(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DBM);
+}
+
+/**
+ * @brief Disable the double buffer mode.
+ * @rmtoll CR DBM LL_DMA_DisableDoubleBufferMode
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableDoubleBufferMode(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DBM);
+}
+
+/**
+ * @brief Get FIFO status.
+ * @rmtoll FCR FS LL_DMA_GetFIFOStatus
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_FIFOSTATUS_0_25
+ * @arg @ref LL_DMA_FIFOSTATUS_25_50
+ * @arg @ref LL_DMA_FIFOSTATUS_50_75
+ * @arg @ref LL_DMA_FIFOSTATUS_75_100
+ * @arg @ref LL_DMA_FIFOSTATUS_EMPTY
+ * @arg @ref LL_DMA_FIFOSTATUS_FULL
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetFIFOStatus(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FS));
+}
+
+/**
+ * @brief Disable Fifo mode.
+ * @rmtoll FCR DMDIS LL_DMA_DisableFifoMode
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableFifoMode(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_DMDIS);
+}
+
+/**
+ * @brief Enable Fifo mode.
+ * @rmtoll FCR DMDIS LL_DMA_EnableFifoMode
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableFifoMode(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_DMDIS);
+}
+
+/**
+ * @brief Select FIFO threshold.
+ * @rmtoll FCR FTH LL_DMA_SetFIFOThreshold
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param Threshold This parameter can be one of the following values:
+ * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4
+ * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2
+ * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4
+ * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetFIFOThreshold(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Threshold)
+{
+ MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FTH, Threshold);
+}
+
+/**
+ * @brief Get FIFO threshold.
+ * @rmtoll FCR FTH LL_DMA_GetFIFOThreshold
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4
+ * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2
+ * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4
+ * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetFIFOThreshold(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FTH));
+}
+
+/**
+ * @brief Configure the FIFO .
+ * @rmtoll FCR FTH LL_DMA_ConfigFifo\n
+ * FCR DMDIS LL_DMA_ConfigFifo
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param FifoMode This parameter can be one of the following values:
+ * @arg @ref LL_DMA_FIFOMODE_ENABLE
+ * @arg @ref LL_DMA_FIFOMODE_DISABLE
+ * @param FifoThreshold This parameter can be one of the following values:
+ * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4
+ * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2
+ * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4
+ * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ConfigFifo(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t FifoMode, uint32_t FifoThreshold)
+{
+ MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FTH|DMA_SxFCR_DMDIS, FifoMode|FifoThreshold);
+}
+
+/**
+ * @brief Configure the Source and Destination addresses.
+ * @note This API must not be called when the DMA stream is enabled.
+ * @rmtoll M0AR M0A LL_DMA_ConfigAddresses\n
+ * PAR PA LL_DMA_ConfigAddresses
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param SrcAddress Between 0 to 0xFFFFFFFF
+ * @param DstAddress Between 0 to 0xFFFFFFFF
+ * @param Direction This parameter can be one of the following values:
+ * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t SrcAddress, uint32_t DstAddress, uint32_t Direction)
+{
+ /* Direction Memory to Periph */
+ if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH)
+ {
+ WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, SrcAddress);
+ WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, DstAddress);
+ }
+ /* Direction Periph to Memory and Memory to Memory */
+ else
+ {
+ WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, SrcAddress);
+ WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, DstAddress);
+ }
+}
+
+/**
+ * @brief Set the Memory address.
+ * @rmtoll M0AR M0A LL_DMA_SetMemoryAddress
+ * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+ * @note This API must not be called when the DMA channel is enabled.
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param MemoryAddress Between 0 to 0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t MemoryAddress)
+{
+ WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, MemoryAddress);
+}
+
+/**
+ * @brief Set the Peripheral address.
+ * @rmtoll PAR PA LL_DMA_SetPeriphAddress
+ * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+ * @note This API must not be called when the DMA channel is enabled.
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param PeriphAddress Between 0 to 0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t PeriphAddress)
+{
+ WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, PeriphAddress);
+}
+
+/**
+ * @brief Get the Memory address.
+ * @rmtoll M0AR M0A LL_DMA_GetMemoryAddress
+ * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Between 0 to 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef* DMAx, uint32_t Stream)
+{
+ return (READ_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR));
+}
+
+/**
+ * @brief Get the Peripheral address.
+ * @rmtoll PAR PA LL_DMA_GetPeriphAddress
+ * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Between 0 to 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef* DMAx, uint32_t Stream)
+{
+ return (READ_REG(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR));
+}
+
+/**
+ * @brief Set the Memory to Memory Source address.
+ * @rmtoll PAR PA LL_DMA_SetM2MSrcAddress
+ * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+ * @note This API must not be called when the DMA channel is enabled.
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param MemoryAddress Between 0 to 0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t MemoryAddress)
+{
+ WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, MemoryAddress);
+}
+
+/**
+ * @brief Set the Memory to Memory Destination address.
+ * @rmtoll M0AR M0A LL_DMA_SetM2MDstAddress
+ * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+ * @note This API must not be called when the DMA channel is enabled.
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param MemoryAddress Between 0 to 0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t MemoryAddress)
+ {
+ WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, MemoryAddress);
+ }
+
+/**
+ * @brief Get the Memory to Memory Source address.
+ * @rmtoll PAR PA LL_DMA_GetM2MSrcAddress
+ * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Between 0 to 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef* DMAx, uint32_t Stream)
+ {
+ return (READ_REG(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR));
+ }
+
+/**
+ * @brief Get the Memory to Memory Destination address.
+ * @rmtoll M0AR M0A LL_DMA_GetM2MDstAddress
+ * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Between 0 to 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef* DMAx, uint32_t Stream)
+{
+ return (READ_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR));
+}
+
+/**
+ * @brief Set Memory 1 address (used in case of Double buffer mode).
+ * @rmtoll M1AR M1A LL_DMA_SetMemory1Address
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param Address Between 0 to 0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetMemory1Address(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Address)
+{
+ MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M1AR, DMA_SxM1AR_M1A, Address);
+}
+
+/**
+ * @brief Get Memory 1 address (used in case of Double buffer mode).
+ * @rmtoll M1AR M1A LL_DMA_GetMemory1Address
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval Between 0 to 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetMemory1Address(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M1AR);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management
+ * @{
+ */
+
+/**
+ * @brief Get Stream 0 half transfer flag.
+ * @rmtoll LISR HTIF0 LL_DMA_IsActiveFlag_HT0
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT0(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF0)==(DMA_LISR_HTIF0));
+}
+
+/**
+ * @brief Get Stream 1 half transfer flag.
+ * @rmtoll LISR HTIF1 LL_DMA_IsActiveFlag_HT1
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF1)==(DMA_LISR_HTIF1));
+}
+
+/**
+ * @brief Get Stream 2 half transfer flag.
+ * @rmtoll LISR HTIF2 LL_DMA_IsActiveFlag_HT2
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF2)==(DMA_LISR_HTIF2));
+}
+
+/**
+ * @brief Get Stream 3 half transfer flag.
+ * @rmtoll LISR HTIF3 LL_DMA_IsActiveFlag_HT3
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF3)==(DMA_LISR_HTIF3));
+}
+
+/**
+ * @brief Get Stream 4 half transfer flag.
+ * @rmtoll HISR HTIF4 LL_DMA_IsActiveFlag_HT4
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF4)==(DMA_HISR_HTIF4));
+}
+
+/**
+ * @brief Get Stream 5 half transfer flag.
+ * @rmtoll HISR HTIF0 LL_DMA_IsActiveFlag_HT5
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF5)==(DMA_HISR_HTIF5));
+}
+
+/**
+ * @brief Get Stream 6 half transfer flag.
+ * @rmtoll HISR HTIF6 LL_DMA_IsActiveFlag_HT6
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF6)==(DMA_HISR_HTIF6));
+}
+
+/**
+ * @brief Get Stream 7 half transfer flag.
+ * @rmtoll HISR HTIF7 LL_DMA_IsActiveFlag_HT7
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF7)==(DMA_HISR_HTIF7));
+}
+
+/**
+ * @brief Get Stream 0 transfer complete flag.
+ * @rmtoll LISR TCIF0 LL_DMA_IsActiveFlag_TC0
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC0(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF0)==(DMA_LISR_TCIF0));
+}
+
+/**
+ * @brief Get Stream 1 transfer complete flag.
+ * @rmtoll LISR TCIF1 LL_DMA_IsActiveFlag_TC1
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF1)==(DMA_LISR_TCIF1));
+}
+
+/**
+ * @brief Get Stream 2 transfer complete flag.
+ * @rmtoll LISR TCIF2 LL_DMA_IsActiveFlag_TC2
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF2)==(DMA_LISR_TCIF2));
+}
+
+/**
+ * @brief Get Stream 3 transfer complete flag.
+ * @rmtoll LISR TCIF3 LL_DMA_IsActiveFlag_TC3
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF3)==(DMA_LISR_TCIF3));
+}
+
+/**
+ * @brief Get Stream 4 transfer complete flag.
+ * @rmtoll HISR TCIF4 LL_DMA_IsActiveFlag_TC4
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF4)==(DMA_HISR_TCIF4));
+}
+
+/**
+ * @brief Get Stream 5 transfer complete flag.
+ * @rmtoll HISR TCIF0 LL_DMA_IsActiveFlag_TC5
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF5)==(DMA_HISR_TCIF5));
+}
+
+/**
+ * @brief Get Stream 6 transfer complete flag.
+ * @rmtoll HISR TCIF6 LL_DMA_IsActiveFlag_TC6
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF6)==(DMA_HISR_TCIF6));
+}
+
+/**
+ * @brief Get Stream 7 transfer complete flag.
+ * @rmtoll HISR TCIF7 LL_DMA_IsActiveFlag_TC7
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF7)==(DMA_HISR_TCIF7));
+}
+
+/**
+ * @brief Get Stream 0 transfer error flag.
+ * @rmtoll LISR TEIF0 LL_DMA_IsActiveFlag_TE0
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE0(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF0)==(DMA_LISR_TEIF0));
+}
+
+/**
+ * @brief Get Stream 1 transfer error flag.
+ * @rmtoll LISR TEIF1 LL_DMA_IsActiveFlag_TE1
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF1)==(DMA_LISR_TEIF1));
+}
+
+/**
+ * @brief Get Stream 2 transfer error flag.
+ * @rmtoll LISR TEIF2 LL_DMA_IsActiveFlag_TE2
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF2)==(DMA_LISR_TEIF2));
+}
+
+/**
+ * @brief Get Stream 3 transfer error flag.
+ * @rmtoll LISR TEIF3 LL_DMA_IsActiveFlag_TE3
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF3)==(DMA_LISR_TEIF3));
+}
+
+/**
+ * @brief Get Stream 4 transfer error flag.
+ * @rmtoll HISR TEIF4 LL_DMA_IsActiveFlag_TE4
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF4)==(DMA_HISR_TEIF4));
+}
+
+/**
+ * @brief Get Stream 5 transfer error flag.
+ * @rmtoll HISR TEIF0 LL_DMA_IsActiveFlag_TE5
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF5)==(DMA_HISR_TEIF5));
+}
+
+/**
+ * @brief Get Stream 6 transfer error flag.
+ * @rmtoll HISR TEIF6 LL_DMA_IsActiveFlag_TE6
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF6)==(DMA_HISR_TEIF6));
+}
+
+/**
+ * @brief Get Stream 7 transfer error flag.
+ * @rmtoll HISR TEIF7 LL_DMA_IsActiveFlag_TE7
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF7)==(DMA_HISR_TEIF7));
+}
+
+/**
+ * @brief Get Stream 0 direct mode error flag.
+ * @rmtoll LISR DMEIF0 LL_DMA_IsActiveFlag_DME0
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME0(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF0)==(DMA_LISR_DMEIF0));
+}
+
+/**
+ * @brief Get Stream 1 direct mode error flag.
+ * @rmtoll LISR DMEIF1 LL_DMA_IsActiveFlag_DME1
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME1(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF1)==(DMA_LISR_DMEIF1));
+}
+
+/**
+ * @brief Get Stream 2 direct mode error flag.
+ * @rmtoll LISR DMEIF2 LL_DMA_IsActiveFlag_DME2
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME2(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF2)==(DMA_LISR_DMEIF2));
+}
+
+/**
+ * @brief Get Stream 3 direct mode error flag.
+ * @rmtoll LISR DMEIF3 LL_DMA_IsActiveFlag_DME3
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME3(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF3)==(DMA_LISR_DMEIF3));
+}
+
+/**
+ * @brief Get Stream 4 direct mode error flag.
+ * @rmtoll HISR DMEIF4 LL_DMA_IsActiveFlag_DME4
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME4(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF4)==(DMA_HISR_DMEIF4));
+}
+
+/**
+ * @brief Get Stream 5 direct mode error flag.
+ * @rmtoll HISR DMEIF0 LL_DMA_IsActiveFlag_DME5
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME5(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF5)==(DMA_HISR_DMEIF5));
+}
+
+/**
+ * @brief Get Stream 6 direct mode error flag.
+ * @rmtoll HISR DMEIF6 LL_DMA_IsActiveFlag_DME6
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME6(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF6)==(DMA_HISR_DMEIF6));
+}
+
+/**
+ * @brief Get Stream 7 direct mode error flag.
+ * @rmtoll HISR DMEIF7 LL_DMA_IsActiveFlag_DME7
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME7(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF7)==(DMA_HISR_DMEIF7));
+}
+
+/**
+ * @brief Get Stream 0 FIFO error flag.
+ * @rmtoll LISR FEIF0 LL_DMA_IsActiveFlag_FE0
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE0(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF0)==(DMA_LISR_FEIF0));
+}
+
+/**
+ * @brief Get Stream 1 FIFO error flag.
+ * @rmtoll LISR FEIF1 LL_DMA_IsActiveFlag_FE1
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE1(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF1)==(DMA_LISR_FEIF1));
+}
+
+/**
+ * @brief Get Stream 2 FIFO error flag.
+ * @rmtoll LISR FEIF2 LL_DMA_IsActiveFlag_FE2
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE2(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF2)==(DMA_LISR_FEIF2));
+}
+
+/**
+ * @brief Get Stream 3 FIFO error flag.
+ * @rmtoll LISR FEIF3 LL_DMA_IsActiveFlag_FE3
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE3(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF3)==(DMA_LISR_FEIF3));
+}
+
+/**
+ * @brief Get Stream 4 FIFO error flag.
+ * @rmtoll HISR FEIF4 LL_DMA_IsActiveFlag_FE4
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE4(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF4)==(DMA_HISR_FEIF4));
+}
+
+/**
+ * @brief Get Stream 5 FIFO error flag.
+ * @rmtoll HISR FEIF0 LL_DMA_IsActiveFlag_FE5
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE5(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF5)==(DMA_HISR_FEIF5));
+}
+
+/**
+ * @brief Get Stream 6 FIFO error flag.
+ * @rmtoll HISR FEIF6 LL_DMA_IsActiveFlag_FE6
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE6(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF6)==(DMA_HISR_FEIF6));
+}
+
+/**
+ * @brief Get Stream 7 FIFO error flag.
+ * @rmtoll HISR FEIF7 LL_DMA_IsActiveFlag_FE7
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE7(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF7)==(DMA_HISR_FEIF7));
+}
+
+/**
+ * @brief Clear Stream 0 half transfer flag.
+ * @rmtoll LIFCR CHTIF0 LL_DMA_ClearFlag_HT0
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT0(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF0);
+}
+
+/**
+ * @brief Clear Stream 1 half transfer flag.
+ * @rmtoll LIFCR CHTIF1 LL_DMA_ClearFlag_HT1
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF1);
+}
+
+/**
+ * @brief Clear Stream 2 half transfer flag.
+ * @rmtoll LIFCR CHTIF2 LL_DMA_ClearFlag_HT2
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF2);
+}
+
+/**
+ * @brief Clear Stream 3 half transfer flag.
+ * @rmtoll LIFCR CHTIF3 LL_DMA_ClearFlag_HT3
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF3);
+}
+
+/**
+ * @brief Clear Stream 4 half transfer flag.
+ * @rmtoll HIFCR CHTIF4 LL_DMA_ClearFlag_HT4
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF4);
+}
+
+/**
+ * @brief Clear Stream 5 half transfer flag.
+ * @rmtoll HIFCR CHTIF5 LL_DMA_ClearFlag_HT5
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF5);
+}
+
+/**
+ * @brief Clear Stream 6 half transfer flag.
+ * @rmtoll HIFCR CHTIF6 LL_DMA_ClearFlag_HT6
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF6);
+}
+
+/**
+ * @brief Clear Stream 7 half transfer flag.
+ * @rmtoll HIFCR CHTIF7 LL_DMA_ClearFlag_HT7
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF7);
+}
+
+/**
+ * @brief Clear Stream 0 transfer complete flag.
+ * @rmtoll LIFCR CTCIF0 LL_DMA_ClearFlag_TC0
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC0(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF0);
+}
+
+/**
+ * @brief Clear Stream 1 transfer complete flag.
+ * @rmtoll LIFCR CTCIF1 LL_DMA_ClearFlag_TC1
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF1);
+}
+
+/**
+ * @brief Clear Stream 2 transfer complete flag.
+ * @rmtoll LIFCR CTCIF2 LL_DMA_ClearFlag_TC2
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF2);
+}
+
+/**
+ * @brief Clear Stream 3 transfer complete flag.
+ * @rmtoll LIFCR CTCIF3 LL_DMA_ClearFlag_TC3
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF3);
+}
+
+/**
+ * @brief Clear Stream 4 transfer complete flag.
+ * @rmtoll HIFCR CTCIF4 LL_DMA_ClearFlag_TC4
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF4);
+}
+
+/**
+ * @brief Clear Stream 5 transfer complete flag.
+ * @rmtoll HIFCR CTCIF5 LL_DMA_ClearFlag_TC5
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF5);
+}
+
+/**
+ * @brief Clear Stream 6 transfer complete flag.
+ * @rmtoll HIFCR CTCIF6 LL_DMA_ClearFlag_TC6
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF6);
+}
+
+/**
+ * @brief Clear Stream 7 transfer complete flag.
+ * @rmtoll HIFCR CTCIF7 LL_DMA_ClearFlag_TC7
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF7);
+}
+
+/**
+ * @brief Clear Stream 0 transfer error flag.
+ * @rmtoll LIFCR CTEIF0 LL_DMA_ClearFlag_TE0
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE0(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF0);
+}
+
+/**
+ * @brief Clear Stream 1 transfer error flag.
+ * @rmtoll LIFCR CTEIF1 LL_DMA_ClearFlag_TE1
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF1);
+}
+
+/**
+ * @brief Clear Stream 2 transfer error flag.
+ * @rmtoll LIFCR CTEIF2 LL_DMA_ClearFlag_TE2
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF2);
+}
+
+/**
+ * @brief Clear Stream 3 transfer error flag.
+ * @rmtoll LIFCR CTEIF3 LL_DMA_ClearFlag_TE3
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF3);
+}
+
+/**
+ * @brief Clear Stream 4 transfer error flag.
+ * @rmtoll HIFCR CTEIF4 LL_DMA_ClearFlag_TE4
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF4);
+}
+
+/**
+ * @brief Clear Stream 5 transfer error flag.
+ * @rmtoll HIFCR CTEIF5 LL_DMA_ClearFlag_TE5
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF5);
+}
+
+/**
+ * @brief Clear Stream 6 transfer error flag.
+ * @rmtoll HIFCR CTEIF6 LL_DMA_ClearFlag_TE6
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF6);
+}
+
+/**
+ * @brief Clear Stream 7 transfer error flag.
+ * @rmtoll HIFCR CTEIF7 LL_DMA_ClearFlag_TE7
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF7);
+}
+
+/**
+ * @brief Clear Stream 0 direct mode error flag.
+ * @rmtoll LIFCR CDMEIF0 LL_DMA_ClearFlag_DME0
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_DME0(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF0);
+}
+
+/**
+ * @brief Clear Stream 1 direct mode error flag.
+ * @rmtoll LIFCR CDMEIF1 LL_DMA_ClearFlag_DME1
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_DME1(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF1);
+}
+
+/**
+ * @brief Clear Stream 2 direct mode error flag.
+ * @rmtoll LIFCR CDMEIF2 LL_DMA_ClearFlag_DME2
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_DME2(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF2);
+}
+
+/**
+ * @brief Clear Stream 3 direct mode error flag.
+ * @rmtoll LIFCR CDMEIF3 LL_DMA_ClearFlag_DME3
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_DME3(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF3);
+}
+
+/**
+ * @brief Clear Stream 4 direct mode error flag.
+ * @rmtoll HIFCR CDMEIF4 LL_DMA_ClearFlag_DME4
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_DME4(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF4);
+}
+
+/**
+ * @brief Clear Stream 5 direct mode error flag.
+ * @rmtoll HIFCR CDMEIF5 LL_DMA_ClearFlag_DME5
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_DME5(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF5);
+}
+
+/**
+ * @brief Clear Stream 6 direct mode error flag.
+ * @rmtoll HIFCR CDMEIF6 LL_DMA_ClearFlag_DME6
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_DME6(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF6);
+}
+
+/**
+ * @brief Clear Stream 7 direct mode error flag.
+ * @rmtoll HIFCR CDMEIF7 LL_DMA_ClearFlag_DME7
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_DME7(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF7);
+}
+
+/**
+ * @brief Clear Stream 0 FIFO error flag.
+ * @rmtoll LIFCR CFEIF0 LL_DMA_ClearFlag_FE0
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_FE0(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF0);
+}
+
+/**
+ * @brief Clear Stream 1 FIFO error flag.
+ * @rmtoll LIFCR CFEIF1 LL_DMA_ClearFlag_FE1
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_FE1(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF1);
+}
+
+/**
+ * @brief Clear Stream 2 FIFO error flag.
+ * @rmtoll LIFCR CFEIF2 LL_DMA_ClearFlag_FE2
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_FE2(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF2);
+}
+
+/**
+ * @brief Clear Stream 3 FIFO error flag.
+ * @rmtoll LIFCR CFEIF3 LL_DMA_ClearFlag_FE3
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_FE3(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF3);
+}
+
+/**
+ * @brief Clear Stream 4 FIFO error flag.
+ * @rmtoll HIFCR CFEIF4 LL_DMA_ClearFlag_FE4
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_FE4(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF4);
+}
+
+/**
+ * @brief Clear Stream 5 FIFO error flag.
+ * @rmtoll HIFCR CFEIF5 LL_DMA_ClearFlag_FE5
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_FE5(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF5);
+}
+
+/**
+ * @brief Clear Stream 6 FIFO error flag.
+ * @rmtoll HIFCR CFEIF6 LL_DMA_ClearFlag_FE6
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_FE6(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF6);
+}
+
+/**
+ * @brief Clear Stream 7 FIFO error flag.
+ * @rmtoll HIFCR CFEIF7 LL_DMA_ClearFlag_FE7
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_FE7(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF7);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EF_IT_Management IT_Management
+ * @{
+ */
+
+/**
+ * @brief Enable Half transfer interrupt.
+ * @rmtoll CR HTIE LL_DMA_EnableIT_HT
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_HTIE);
+}
+
+/**
+ * @brief Enable Transfer error interrupt.
+ * @rmtoll CR TEIE LL_DMA_EnableIT_TE
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TEIE);
+}
+
+/**
+ * @brief Enable Transfer complete interrupt.
+ * @rmtoll CR TCIE LL_DMA_EnableIT_TC
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TCIE);
+}
+
+/**
+ * @brief Enable Direct mode error interrupt.
+ * @rmtoll CR DMEIE LL_DMA_EnableIT_DME
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableIT_DME(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DMEIE);
+}
+
+/**
+ * @brief Enable FIFO error interrupt.
+ * @rmtoll FCR FEIE LL_DMA_EnableIT_FE
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableIT_FE(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FEIE);
+}
+
+/**
+ * @brief Disable Half transfer interrupt.
+ * @rmtoll CR HTIE LL_DMA_DisableIT_HT
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_HTIE);
+}
+
+/**
+ * @brief Disable Transfer error interrupt.
+ * @rmtoll CR TEIE LL_DMA_DisableIT_TE
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TEIE);
+}
+
+/**
+ * @brief Disable Transfer complete interrupt.
+ * @rmtoll CR TCIE LL_DMA_DisableIT_TC
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TCIE);
+}
+
+/**
+ * @brief Disable Direct mode error interrupt.
+ * @rmtoll CR DMEIE LL_DMA_DisableIT_DME
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableIT_DME(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DMEIE);
+}
+
+/**
+ * @brief Disable FIFO error interrupt.
+ * @rmtoll FCR FEIE LL_DMA_DisableIT_FE
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableIT_FE(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FEIE);
+}
+
+/**
+ * @brief Check if Half transfer interrup is enabled.
+ * @rmtoll CR HTIE LL_DMA_IsEnabledIT_HT
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_HTIE) == DMA_SxCR_HTIE);
+}
+
+/**
+ * @brief Check if Transfer error nterrup is enabled.
+ * @rmtoll CR TEIE LL_DMA_IsEnabledIT_TE
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TEIE) == DMA_SxCR_TEIE);
+}
+
+/**
+ * @brief Check if Transfer complete interrup is enabled.
+ * @rmtoll CR TCIE LL_DMA_IsEnabledIT_TC
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TCIE) == DMA_SxCR_TCIE);
+}
+
+/**
+ * @brief Check if Direct mode error interrupt is enabled.
+ * @rmtoll CR DMEIE LL_DMA_IsEnabledIT_DME
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_DME(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DMEIE) == DMA_SxCR_DMEIE);
+}
+
+/**
+ * @brief Check if FIFO error interrup is enabled.
+ * @rmtoll FCR FEIE LL_DMA_IsEnabledIT_FE
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_FE(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FEIE) == DMA_SxFCR_FEIE);
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Stream, LL_DMA_InitTypeDef *DMA_InitStruct);
+uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Stream);
+void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct);
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* DMA1 || DMA2 */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_LL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h
new file mode 100644
index 00000000..b85d64a1
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h
@@ -0,0 +1,966 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_ll_exti.h
+ * @author MCD Application Team
+ * @brief Header file of EXTI LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_LL_EXTI_H
+#define __STM32F7xx_LL_EXTI_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx.h"
+
+/** @addtogroup STM32F7xx_LL_Driver
+ * @{
+ */
+
+#if defined (EXTI)
+
+/** @defgroup EXTI_LL EXTI
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private Macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure
+ * @{
+ */
+typedef struct
+{
+
+ uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31
+ This parameter can be any combination of @ref EXTI_LL_EC_LINE */
+
+ FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines.
+ This parameter can be set either to ENABLE or DISABLE */
+
+ uint8_t Mode; /*!< Specifies the mode for the EXTI lines.
+ This parameter can be a value of @ref EXTI_LL_EC_MODE. */
+
+ uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
+ This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */
+} LL_EXTI_InitTypeDef;
+
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants
+ * @{
+ */
+
+/** @defgroup EXTI_LL_EC_LINE LINE
+ * @{
+ */
+#define LL_EXTI_LINE_0 EXTI_IMR_IM0 /*!< Extended line 0 */
+#define LL_EXTI_LINE_1 EXTI_IMR_IM1 /*!< Extended line 1 */
+#define LL_EXTI_LINE_2 EXTI_IMR_IM2 /*!< Extended line 2 */
+#define LL_EXTI_LINE_3 EXTI_IMR_IM3 /*!< Extended line 3 */
+#define LL_EXTI_LINE_4 EXTI_IMR_IM4 /*!< Extended line 4 */
+#define LL_EXTI_LINE_5 EXTI_IMR_IM5 /*!< Extended line 5 */
+#define LL_EXTI_LINE_6 EXTI_IMR_IM6 /*!< Extended line 6 */
+#define LL_EXTI_LINE_7 EXTI_IMR_IM7 /*!< Extended line 7 */
+#define LL_EXTI_LINE_8 EXTI_IMR_IM8 /*!< Extended line 8 */
+#define LL_EXTI_LINE_9 EXTI_IMR_IM9 /*!< Extended line 9 */
+#define LL_EXTI_LINE_10 EXTI_IMR_IM10 /*!< Extended line 10 */
+#define LL_EXTI_LINE_11 EXTI_IMR_IM11 /*!< Extended line 11 */
+#define LL_EXTI_LINE_12 EXTI_IMR_IM12 /*!< Extended line 12 */
+#define LL_EXTI_LINE_13 EXTI_IMR_IM13 /*!< Extended line 13 */
+#define LL_EXTI_LINE_14 EXTI_IMR_IM14 /*!< Extended line 14 */
+#define LL_EXTI_LINE_15 EXTI_IMR_IM15 /*!< Extended line 15 */
+#if defined(EXTI_IMR_IM16)
+#define LL_EXTI_LINE_16 EXTI_IMR_IM16 /*!< Extended line 16 */
+#endif
+#define LL_EXTI_LINE_17 EXTI_IMR_IM17 /*!< Extended line 17 */
+#if defined(EXTI_IMR_IM18)
+#define LL_EXTI_LINE_18 EXTI_IMR_IM18 /*!< Extended line 18 */
+#endif
+#define LL_EXTI_LINE_19 EXTI_IMR_IM19 /*!< Extended line 19 */
+#if defined(EXTI_IMR_IM20)
+#define LL_EXTI_LINE_20 EXTI_IMR_IM20 /*!< Extended line 20 */
+#endif
+#if defined(EXTI_IMR_IM21)
+#define LL_EXTI_LINE_21 EXTI_IMR_IM21 /*!< Extended line 21 */
+#endif
+#if defined(EXTI_IMR_IM22)
+#define LL_EXTI_LINE_22 EXTI_IMR_IM22 /*!< Extended line 22 */
+#endif
+#define LL_EXTI_LINE_23 EXTI_IMR_IM23 /*!< Extended line 23 */
+#if defined(EXTI_IMR_IM24)
+#define LL_EXTI_LINE_24 EXTI_IMR_IM24 /*!< Extended line 24 */
+#endif
+#if defined(EXTI_IMR_IM25)
+#define LL_EXTI_LINE_25 EXTI_IMR_IM25 /*!< Extended line 25 */
+#endif
+#if defined(EXTI_IMR_IM26)
+#define LL_EXTI_LINE_26 EXTI_IMR_IM26 /*!< Extended line 26 */
+#endif
+#if defined(EXTI_IMR_IM27)
+#define LL_EXTI_LINE_27 EXTI_IMR_IM27 /*!< Extended line 27 */
+#endif
+#if defined(EXTI_IMR_IM28)
+#define LL_EXTI_LINE_28 EXTI_IMR_IM28 /*!< Extended line 28 */
+#endif
+#if defined(EXTI_IMR_IM29)
+#define LL_EXTI_LINE_29 EXTI_IMR_IM29 /*!< Extended line 29 */
+#endif
+#if defined(EXTI_IMR_IM30)
+#define LL_EXTI_LINE_30 EXTI_IMR_IM30 /*!< Extended line 30 */
+#endif
+#if defined(EXTI_IMR_IM31)
+#define LL_EXTI_LINE_31 EXTI_IMR_IM31 /*!< Extended line 31 */
+#endif
+#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR_IM /*!< All Extended line not reserved*/
+
+
+#define LL_EXTI_LINE_ALL (0xFFFFFFFFU) /*!< All Extended line */
+
+#if defined(USE_FULL_LL_DRIVER)
+#define LL_EXTI_LINE_NONE (0x00000000U) /*!< None Extended line */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/**
+ * @}
+ */
+#if defined(USE_FULL_LL_DRIVER)
+
+/** @defgroup EXTI_LL_EC_MODE Mode
+ * @{
+ */
+#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */
+#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */
+#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger
+ * @{
+ */
+#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */
+#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */
+#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */
+#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */
+
+/**
+ * @}
+ */
+
+
+#endif /*USE_FULL_LL_DRIVER*/
+
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros
+ * @{
+ */
+
+/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in EXTI register
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in EXTI register
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__)
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions
+ * @{
+ */
+/** @defgroup EXTI_LL_EF_IT_Management IT_Management
+ * @{
+ */
+
+/**
+ * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31
+ * @note The reset value for the direct or internal lines (see RM)
+ * is set to 1 in order to enable the interrupt by default.
+ * Bits are set automatically at Power on.
+ * @rmtoll IMR IMx LL_EXTI_EnableIT_0_31
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_17
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_23
+ * @arg @ref LL_EXTI_LINE_24(*)
+ * @arg @ref LL_EXTI_LINE_ALL_0_31
+ * @note (*): Available in some devices
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->IMR, ExtiLine);
+}
+
+/**
+ * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31
+ * @note The reset value for the direct or internal lines (see RM)
+ * is set to 1 in order to enable the interrupt by default.
+ * Bits are set automatically at Power on.
+ * @rmtoll IMR IMx LL_EXTI_DisableIT_0_31
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_17
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_23
+ * @arg @ref LL_EXTI_LINE_24(*)
+ * @arg @ref LL_EXTI_LINE_ALL_0_31
+ * @note (*): Available in some devices
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine)
+{
+ CLEAR_BIT(EXTI->IMR, ExtiLine);
+}
+
+
+/**
+ * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31
+ * @note The reset value for the direct or internal lines (see RM)
+ * is set to 1 in order to enable the interrupt by default.
+ * Bits are set automatically at Power on.
+ * @rmtoll IMR IMx LL_EXTI_IsEnabledIT_0_31
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_17
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_23
+ * @arg @ref LL_EXTI_LINE_24(*)
+ * @arg @ref LL_EXTI_LINE_ALL_0_31
+ * @note (*): Available in some devices
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->IMR, ExtiLine) == (ExtiLine));
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_LL_EF_Event_Management Event_Management
+ * @{
+ */
+
+/**
+ * @brief Enable ExtiLine Event request for Lines in range 0 to 31
+ * @rmtoll EMR EMx LL_EXTI_EnableEvent_0_31
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_17
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_23
+ * @arg @ref LL_EXTI_LINE_24(*)
+ * @arg @ref LL_EXTI_LINE_ALL_0_31
+ * @note (*): Available in some devices
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->EMR, ExtiLine);
+
+}
+
+
+/**
+ * @brief Disable ExtiLine Event request for Lines in range 0 to 31
+ * @rmtoll EMR EMx LL_EXTI_DisableEvent_0_31
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_17
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_23
+ * @arg @ref LL_EXTI_LINE_24(*)
+ * @arg @ref LL_EXTI_LINE_ALL_0_31
+ * @note (*): Available in some devices
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine)
+{
+ CLEAR_BIT(EXTI->EMR, ExtiLine);
+}
+
+
+/**
+ * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31
+ * @rmtoll EMR EMx LL_EXTI_IsEnabledEvent_0_31
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_17
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_23
+ * @arg @ref LL_EXTI_LINE_24(*)
+ * @arg @ref LL_EXTI_LINE_ALL_0_31
+ * @note (*): Available in some devices
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->EMR, ExtiLine) == (ExtiLine));
+
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management
+ * @{
+ */
+
+/**
+ * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
+ * @note The configurable wakeup lines are edge-triggered. No glitch must be
+ * generated on these lines. If a rising edge on a configurable interrupt
+ * line occurs during a write operation in the EXTI_RTSR register, the
+ * pending bit is not set.
+ * Rising and falling edge triggers can be set for
+ * the same interrupt line. In this case, both generate a trigger
+ * condition.
+ * @rmtoll RTSR RTx LL_EXTI_EnableRisingTrig_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->RTSR, ExtiLine);
+
+}
+
+
+/**
+ * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
+ * @note The configurable wakeup lines are edge-triggered. No glitch must be
+ * generated on these lines. If a rising edge on a configurable interrupt
+ * line occurs during a write operation in the EXTI_RTSR register, the
+ * pending bit is not set.
+ * Rising and falling edge triggers can be set for
+ * the same interrupt line. In this case, both generate a trigger
+ * condition.
+ * @rmtoll RTSR RTx LL_EXTI_DisableRisingTrig_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine)
+{
+ CLEAR_BIT(EXTI->RTSR, ExtiLine);
+
+}
+
+
+/**
+ * @brief Check if rising edge trigger is enabled for Lines in range 0 to 31
+ * @rmtoll RTSR RTx LL_EXTI_IsEnabledRisingTrig_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->RTSR, ExtiLine) == (ExtiLine));
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management
+ * @{
+ */
+
+/**
+ * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
+ * @note The configurable wakeup lines are edge-triggered. No glitch must be
+ * generated on these lines. If a falling edge on a configurable interrupt
+ * line occurs during a write operation in the EXTI_FTSR register, the
+ * pending bit is not set.
+ * Rising and falling edge triggers can be set for
+ * the same interrupt line. In this case, both generate a trigger
+ * condition.
+ * @rmtoll FTSR FTx LL_EXTI_EnableFallingTrig_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->FTSR, ExtiLine);
+}
+
+
+/**
+ * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
+ * @note The configurable wakeup lines are edge-triggered. No glitch must be
+ * generated on these lines. If a Falling edge on a configurable interrupt
+ * line occurs during a write operation in the EXTI_FTSR register, the
+ * pending bit is not set.
+ * Rising and falling edge triggers can be set for the same interrupt line.
+ * In this case, both generate a trigger condition.
+ * @rmtoll FTSR FTx LL_EXTI_DisableFallingTrig_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine)
+{
+ CLEAR_BIT(EXTI->FTSR, ExtiLine);
+}
+
+
+/**
+ * @brief Check if falling edge trigger is enabled for Lines in range 0 to 31
+ * @rmtoll FTSR FTx LL_EXTI_IsEnabledFallingTrig_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->FTSR, ExtiLine) == (ExtiLine));
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management
+ * @{
+ */
+
+/**
+ * @brief Generate a software Interrupt Event for Lines in range 0 to 31
+ * @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to
+ * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR
+ * resulting in an interrupt request generation.
+ * This bit is cleared by clearing the corresponding bit in the EXTI_PR
+ * register (by writing a 1 into the bit)
+ * @rmtoll SWIER SWIx LL_EXTI_GenerateSWI_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->SWIER, ExtiLine);
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management
+ * @{
+ */
+
+/**
+ * @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31
+ * @note This bit is set when the selected edge event arrives on the interrupt
+ * line. This bit is cleared by writing a 1 to the bit.
+ * @rmtoll PR PIFx LL_EXTI_IsActiveFlag_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->PR, ExtiLine) == (ExtiLine));
+}
+
+
+/**
+ * @brief Read ExtLine Combination Flag for Lines in range 0 to 31
+ * @note This bit is set when the selected edge event arrives on the interrupt
+ * line. This bit is cleared by writing a 1 to the bit.
+ * @rmtoll PR PIFx LL_EXTI_ReadFlag_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval @note This bit is set when the selected edge event arrives on the interrupt
+ */
+__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine)
+{
+ return (uint32_t)(READ_BIT(EXTI->PR, ExtiLine));
+}
+
+
+/**
+ * @brief Clear ExtLine Flags for Lines in range 0 to 31
+ * @note This bit is set when the selected edge event arrives on the interrupt
+ * line. This bit is cleared by writing a 1 to the bit.
+ * @rmtoll PR PIFx LL_EXTI_ClearFlag_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine)
+{
+ WRITE_REG(EXTI->PR, ExtiLine);
+}
+
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct);
+uint32_t LL_EXTI_DeInit(void);
+void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct);
+
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* EXTI */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_LL_EXTI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h
new file mode 100644
index 00000000..92c6ae1b
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h
@@ -0,0 +1,998 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_ll_gpio.h
+ * @author MCD Application Team
+ * @brief Header file of GPIO LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_LL_GPIO_H
+#define __STM32F7xx_LL_GPIO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx.h"
+
+/** @addtogroup STM32F7xx_LL_Driver
+ * @{
+ */
+
+#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK)
+
+/** @defgroup GPIO_LL GPIO
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures
+ * @{
+ */
+
+/**
+ * @brief LL GPIO Init Structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_LL_EC_PIN */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_MODE.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_SPEED.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/
+
+ uint32_t OutputType; /*!< Specifies the operating output type for the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_OUTPUT.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/
+
+ uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_PULL.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/
+
+ uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_AF.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/
+} LL_GPIO_InitTypeDef;
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIO_LL_EC_PIN PIN
+ * @{
+ */
+#define LL_GPIO_PIN_0 GPIO_BSRR_BS_0 /*!< Select pin 0 */
+#define LL_GPIO_PIN_1 GPIO_BSRR_BS_1 /*!< Select pin 1 */
+#define LL_GPIO_PIN_2 GPIO_BSRR_BS_2 /*!< Select pin 2 */
+#define LL_GPIO_PIN_3 GPIO_BSRR_BS_3 /*!< Select pin 3 */
+#define LL_GPIO_PIN_4 GPIO_BSRR_BS_4 /*!< Select pin 4 */
+#define LL_GPIO_PIN_5 GPIO_BSRR_BS_5 /*!< Select pin 5 */
+#define LL_GPIO_PIN_6 GPIO_BSRR_BS_6 /*!< Select pin 6 */
+#define LL_GPIO_PIN_7 GPIO_BSRR_BS_7 /*!< Select pin 7 */
+#define LL_GPIO_PIN_8 GPIO_BSRR_BS_8 /*!< Select pin 8 */
+#define LL_GPIO_PIN_9 GPIO_BSRR_BS_9 /*!< Select pin 9 */
+#define LL_GPIO_PIN_10 GPIO_BSRR_BS_10 /*!< Select pin 10 */
+#define LL_GPIO_PIN_11 GPIO_BSRR_BS_11 /*!< Select pin 11 */
+#define LL_GPIO_PIN_12 GPIO_BSRR_BS_12 /*!< Select pin 12 */
+#define LL_GPIO_PIN_13 GPIO_BSRR_BS_13 /*!< Select pin 13 */
+#define LL_GPIO_PIN_14 GPIO_BSRR_BS_14 /*!< Select pin 14 */
+#define LL_GPIO_PIN_15 GPIO_BSRR_BS_15 /*!< Select pin 15 */
+#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS_0 | GPIO_BSRR_BS_1 | GPIO_BSRR_BS_2 | \
+ GPIO_BSRR_BS_3 | GPIO_BSRR_BS_4 | GPIO_BSRR_BS_5 | \
+ GPIO_BSRR_BS_6 | GPIO_BSRR_BS_7 | GPIO_BSRR_BS_8 | \
+ GPIO_BSRR_BS_9 | GPIO_BSRR_BS_10 | GPIO_BSRR_BS_11 | \
+ GPIO_BSRR_BS_12 | GPIO_BSRR_BS_13 | GPIO_BSRR_BS_14 | \
+ GPIO_BSRR_BS_15) /*!< Select all pins */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EC_MODE Mode
+ * @{
+ */
+#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */
+#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODER0_0 /*!< Select output mode */
+#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODER0_1 /*!< Select alternate function mode */
+#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODER0 /*!< Select analog mode */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EC_OUTPUT Output Type
+ * @{
+ */
+#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */
+#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT_0 /*!< Select open-drain as output type */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EC_SPEED Output Speed
+ * @{
+ */
+#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */
+#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDER_OSPEEDR0_0 /*!< Select I/O medium output speed */
+#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDER_OSPEEDR0_1 /*!< Select I/O fast output speed */
+#define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDER_OSPEEDR0 /*!< Select I/O high output speed */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down
+ * @{
+ */
+#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */
+#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPDR0_0 /*!< Select I/O pull up */
+#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPDR0_1 /*!< Select I/O pull down */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EC_AF Alternate Function
+ * @{
+ */
+#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */
+#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */
+#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */
+#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */
+#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */
+#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */
+#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */
+#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */
+#define LL_GPIO_AF_8 (0x0000008U) /*!< Select alternate function 8 */
+#define LL_GPIO_AF_9 (0x0000009U) /*!< Select alternate function 9 */
+#define LL_GPIO_AF_10 (0x000000AU) /*!< Select alternate function 10 */
+#define LL_GPIO_AF_11 (0x000000BU) /*!< Select alternate function 11 */
+#define LL_GPIO_AF_12 (0x000000CU) /*!< Select alternate function 12 */
+#define LL_GPIO_AF_13 (0x000000DU) /*!< Select alternate function 13 */
+#define LL_GPIO_AF_14 (0x000000EU) /*!< Select alternate function 14 */
+#define LL_GPIO_AF_15 (0x000000FU) /*!< Select alternate function 15 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+
+/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in GPIO register
+ * @param __INSTANCE__ GPIO Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in GPIO register
+ * @param __INSTANCE__ GPIO Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+
+/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration
+ * @{
+ */
+
+/**
+ * @brief Configure gpio mode for a dedicated pin on dedicated port.
+ * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll MODER MODEy LL_GPIO_SetPinMode
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @param Mode This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_MODE_INPUT
+ * @arg @ref LL_GPIO_MODE_OUTPUT
+ * @arg @ref LL_GPIO_MODE_ALTERNATE
+ * @arg @ref LL_GPIO_MODE_ANALOG
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode)
+{
+ MODIFY_REG(GPIOx->MODER, (GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U)), (Mode << (POSITION_VAL(Pin) * 2U)));
+}
+
+/**
+ * @brief Return gpio mode for a dedicated pin on dedicated port.
+ * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll MODER MODEy LL_GPIO_GetPinMode
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_MODE_INPUT
+ * @arg @ref LL_GPIO_MODE_OUTPUT
+ * @arg @ref LL_GPIO_MODE_ALTERNATE
+ * @arg @ref LL_GPIO_MODE_ANALOG
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->MODER,
+ (GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U));
+}
+
+/**
+ * @brief Configure gpio output type for several pins on dedicated port.
+ * @note Output type as to be set when gpio pin is in output or
+ * alternate modes. Possible type are Push-pull or Open-drain.
+ * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @param OutputType This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_OUTPUT_PUSHPULL
+ * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType)
+{
+ MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType));
+}
+
+/**
+ * @brief Return gpio output type for several pins on dedicated port.
+ * @note Output type as to be set when gpio pin is in output or
+ * alternate modes. Possible type are Push-pull or Open-drain.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_OUTPUT_PUSHPULL
+ * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) >> POSITION_VAL(Pin));
+}
+
+/**
+ * @brief Configure gpio speed for a dedicated pin on dedicated port.
+ * @note I/O speed can be Low, Medium, Fast or High speed.
+ * @note Warning: only one pin can be passed as parameter.
+ * @note Refer to datasheet for frequency specifications and the power
+ * supply and load conditions for each speed.
+ * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @param Speed This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_SPEED_FREQ_LOW
+ * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
+ * @arg @ref LL_GPIO_SPEED_FREQ_HIGH
+ * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed)
+{
+ MODIFY_REG(GPIOx->OSPEEDR, (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U)),
+ (Speed << (POSITION_VAL(Pin) * 2U)));
+}
+
+/**
+ * @brief Return gpio speed for a dedicated pin on dedicated port.
+ * @note I/O speed can be Low, Medium, Fast or High speed.
+ * @note Warning: only one pin can be passed as parameter.
+ * @note Refer to datasheet for frequency specifications and the power
+ * supply and load conditions for each speed.
+ * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_SPEED_FREQ_LOW
+ * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
+ * @arg @ref LL_GPIO_SPEED_FREQ_HIGH
+ * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->OSPEEDR,
+ (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U));
+}
+
+/**
+ * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @param Pull This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PULL_NO
+ * @arg @ref LL_GPIO_PULL_UP
+ * @arg @ref LL_GPIO_PULL_DOWN
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull)
+{
+ MODIFY_REG(GPIOx->PUPDR, (GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U)), (Pull << (POSITION_VAL(Pin) * 2U)));
+}
+
+/**
+ * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_PULL_NO
+ * @arg @ref LL_GPIO_PULL_UP
+ * @arg @ref LL_GPIO_PULL_DOWN
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->PUPDR,
+ (GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U));
+}
+
+/**
+ * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
+ * @note Possible values are from AF0 to AF15 depending on target.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @param Alternate This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_AF_0
+ * @arg @ref LL_GPIO_AF_1
+ * @arg @ref LL_GPIO_AF_2
+ * @arg @ref LL_GPIO_AF_3
+ * @arg @ref LL_GPIO_AF_4
+ * @arg @ref LL_GPIO_AF_5
+ * @arg @ref LL_GPIO_AF_6
+ * @arg @ref LL_GPIO_AF_7
+ * @arg @ref LL_GPIO_AF_8
+ * @arg @ref LL_GPIO_AF_9
+ * @arg @ref LL_GPIO_AF_10
+ * @arg @ref LL_GPIO_AF_11
+ * @arg @ref LL_GPIO_AF_12
+ * @arg @ref LL_GPIO_AF_13
+ * @arg @ref LL_GPIO_AF_14
+ * @arg @ref LL_GPIO_AF_15
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
+{
+ MODIFY_REG(GPIOx->AFR[0], (GPIO_AFRL_AFRL0 << (POSITION_VAL(Pin) * 4U)),
+ (Alternate << (POSITION_VAL(Pin) * 4U)));
+}
+
+/**
+ * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
+ * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_AF_0
+ * @arg @ref LL_GPIO_AF_1
+ * @arg @ref LL_GPIO_AF_2
+ * @arg @ref LL_GPIO_AF_3
+ * @arg @ref LL_GPIO_AF_4
+ * @arg @ref LL_GPIO_AF_5
+ * @arg @ref LL_GPIO_AF_6
+ * @arg @ref LL_GPIO_AF_7
+ * @arg @ref LL_GPIO_AF_8
+ * @arg @ref LL_GPIO_AF_9
+ * @arg @ref LL_GPIO_AF_10
+ * @arg @ref LL_GPIO_AF_11
+ * @arg @ref LL_GPIO_AF_12
+ * @arg @ref LL_GPIO_AF_13
+ * @arg @ref LL_GPIO_AF_14
+ * @arg @ref LL_GPIO_AF_15
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->AFR[0],
+ (GPIO_AFRL_AFRL0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U));
+}
+
+/**
+ * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
+ * @note Possible values are from AF0 to AF15 depending on target.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @param Alternate This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_AF_0
+ * @arg @ref LL_GPIO_AF_1
+ * @arg @ref LL_GPIO_AF_2
+ * @arg @ref LL_GPIO_AF_3
+ * @arg @ref LL_GPIO_AF_4
+ * @arg @ref LL_GPIO_AF_5
+ * @arg @ref LL_GPIO_AF_6
+ * @arg @ref LL_GPIO_AF_7
+ * @arg @ref LL_GPIO_AF_8
+ * @arg @ref LL_GPIO_AF_9
+ * @arg @ref LL_GPIO_AF_10
+ * @arg @ref LL_GPIO_AF_11
+ * @arg @ref LL_GPIO_AF_12
+ * @arg @ref LL_GPIO_AF_13
+ * @arg @ref LL_GPIO_AF_14
+ * @arg @ref LL_GPIO_AF_15
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
+{
+ MODIFY_REG(GPIOx->AFR[1], (GPIO_AFRH_AFRH0 << (POSITION_VAL(Pin >> 8U) * 4U)),
+ (Alternate << (POSITION_VAL(Pin >> 8U) * 4U)));
+}
+
+/**
+ * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
+ * @note Possible values are from AF0 to AF15 depending on target.
+ * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_AF_0
+ * @arg @ref LL_GPIO_AF_1
+ * @arg @ref LL_GPIO_AF_2
+ * @arg @ref LL_GPIO_AF_3
+ * @arg @ref LL_GPIO_AF_4
+ * @arg @ref LL_GPIO_AF_5
+ * @arg @ref LL_GPIO_AF_6
+ * @arg @ref LL_GPIO_AF_7
+ * @arg @ref LL_GPIO_AF_8
+ * @arg @ref LL_GPIO_AF_9
+ * @arg @ref LL_GPIO_AF_10
+ * @arg @ref LL_GPIO_AF_11
+ * @arg @ref LL_GPIO_AF_12
+ * @arg @ref LL_GPIO_AF_13
+ * @arg @ref LL_GPIO_AF_14
+ * @arg @ref LL_GPIO_AF_15
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->AFR[1],
+ (GPIO_AFRH_AFRH0 << (POSITION_VAL(Pin >> 8U) * 4U))) >> (POSITION_VAL(Pin >> 8U) * 4U));
+}
+
+
+/**
+ * @brief Lock configuration of several pins for a dedicated port.
+ * @note When the lock sequence has been applied on a port bit, the
+ * value of this port bit can no longer be modified until the
+ * next reset.
+ * @note Each lock bit freezes a specific configuration register
+ * (control and alternate function registers).
+ * @rmtoll LCKR LCKK LL_GPIO_LockPin
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ __IO uint32_t temp;
+ WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
+ WRITE_REG(GPIOx->LCKR, PinMask);
+ WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
+ temp = READ_REG(GPIOx->LCKR);
+ (void) temp;
+}
+
+/**
+ * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0.
+ * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ return (READ_BIT(GPIOx->LCKR, PinMask) == (PinMask));
+}
+
+/**
+ * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0.
+ * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked
+ * @param GPIOx GPIO Port
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx)
+{
+ return (READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EF_Data_Access Data Access
+ * @{
+ */
+
+/**
+ * @brief Return full input data register value for a dedicated port.
+ * @rmtoll IDR IDy LL_GPIO_ReadInputPort
+ * @param GPIOx GPIO Port
+ * @retval Input data register value of port
+ */
+__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx)
+{
+ return (uint32_t)(READ_REG(GPIOx->IDR));
+}
+
+/**
+ * @brief Return if input data level for several pins of dedicated port is high or low.
+ * @rmtoll IDR IDy LL_GPIO_IsInputPinSet
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ return (READ_BIT(GPIOx->IDR, PinMask) == (PinMask));
+}
+
+/**
+ * @brief Write output data register for the port.
+ * @rmtoll ODR ODy LL_GPIO_WriteOutputPort
+ * @param GPIOx GPIO Port
+ * @param PortValue Level value for each pin of the port
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue)
+{
+ WRITE_REG(GPIOx->ODR, PortValue);
+}
+
+/**
+ * @brief Return full output data register value for a dedicated port.
+ * @rmtoll ODR ODy LL_GPIO_ReadOutputPort
+ * @param GPIOx GPIO Port
+ * @retval Output data register value of port
+ */
+__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx)
+{
+ return (uint32_t)(READ_REG(GPIOx->ODR));
+}
+
+/**
+ * @brief Return if input data level for several pins of dedicated port is high or low.
+ * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ return (READ_BIT(GPIOx->ODR, PinMask) == (PinMask));
+}
+
+/**
+ * @brief Set several pins to high level on dedicated gpio port.
+ * @rmtoll BSRR BSy LL_GPIO_SetOutputPin
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ WRITE_REG(GPIOx->BSRR, PinMask);
+}
+
+/**
+ * @brief Set several pins to low level on dedicated gpio port.
+ * @rmtoll BSRR BRy LL_GPIO_ResetOutputPin
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ WRITE_REG(GPIOx->BSRR, (PinMask << 16));
+}
+
+/**
+ * @brief Toggle data value for several pin of dedicated port.
+ * @rmtoll ODR ODy LL_GPIO_TogglePin
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ WRITE_REG(GPIOx->ODR, READ_REG(GPIOx->ODR) ^ PinMask);
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx);
+ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct);
+void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct);
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK) */
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_LL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h
new file mode 100644
index 00000000..eae8e337
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h
@@ -0,0 +1,1034 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_ll_pwr.h
+ * @author MCD Application Team
+ * @brief Header file of PWR LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_LL_PWR_H
+#define __STM32F7xx_LL_PWR_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx.h"
+
+/** @addtogroup STM32F7xx_LL_Driver
+ * @{
+ */
+
+#if defined(PWR)
+
+/** @defgroup PWR_LL PWR
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants
+ * @{
+ */
+
+/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines
+ * @brief Flags defines which can be used with LL_PWR_WriteReg function
+ * @{
+ */
+#define LL_PWR_CR1_CSBF PWR_CR1_CSBF /*!< Clear standby flag */
+
+#define LL_PWR_CR2_CWUF6 PWR_CR2_CWUF6 /*!< Clear WKUP pin 6 */
+#define LL_PWR_CR2_CWUF5 PWR_CR2_CWUF5 /*!< Clear WKUP pin 5 */
+#define LL_PWR_CR2_CWUF4 PWR_CR2_CWUF4 /*!< Clear WKUP pin 4 */
+#define LL_PWR_CR2_CWUF3 PWR_CR2_CWUF3 /*!< Clear WKUP pin 3 */
+#define LL_PWR_CR2_CWUF2 PWR_CR2_CWUF2 /*!< Clear WKUP pin 2 */
+#define LL_PWR_CR2_CWUF1 PWR_CR2_CWUF1 /*!< Clear WKUP pin 1 */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_PWR_ReadReg function
+ * @{
+ */
+#define LL_PWR_CSR1_WUIF PWR_CSR1_WUIF /*!< Wakeup flag */
+#define LL_PWR_CSR1_SBF PWR_CSR1_SBF /*!< Standby flag */
+#define LL_PWR_CSR1_PVDO PWR_CSR1_PVDO /*!< Power voltage detector output flag */
+#define LL_PWR_CSR1_BRR PWR_CSR1_BRR /*!< Backup Regulator ready flag */
+#define LL_PWR_CSR1_VOSRDY PWR_CSR1_VOSRDY /*!< Voltage scaling select flag */
+#define LL_PWR_CSR1_ODRDY PWR_CSR1_ODRDY /*!< Over-drive mode ready */
+#define LL_PWR_CSR1_ODSWRDY PWR_CSR1_ODSWRDY /*!< Over-drive mode switching ready */
+#define LL_PWR_CSR1_UDRDY PWR_CSR1_UDRDY /*!< Under-drive ready flag */
+
+#define LL_PWR_CSR2_EWUP1 PWR_CSR2_EWUP1 /*!< Enable WKUP pin 1 */
+#define LL_PWR_CSR2_EWUP2 PWR_CSR2_EWUP2 /*!< Enable WKUP pin 2 */
+#define LL_PWR_CSR2_EWUP3 PWR_CSR2_EWUP3 /*!< Enable WKUP pin 3 */
+#define LL_PWR_CSR2_EWUP4 PWR_CSR2_EWUP4 /*!< Enable WKUP pin 4 */
+#define LL_PWR_CSR2_EWUP5 PWR_CSR2_EWUP5 /*!< Enable WKUP pin 5 */
+#define LL_PWR_CSR2_EWUP6 PWR_CSR2_EWUP6 /*!< Enable WKUP pin 6 */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EC_MODE_PWR Mode Power
+ * @{
+ */
+#define LL_PWR_MODE_STOP_MAINREGU 0x00000000U /*!< Enter Stop mode (with main Regulator ON) when the CPU enters deepsleep */
+#define LL_PWR_MODE_STOP_MAINREGU_UNDERDRIVE (PWR_CR1_MRUDS | PWR_CR1_FPDS) /*!< Enter Stop mode (with main Regulator in under-drive mode) when the CPU enters deepsleep */
+#define LL_PWR_MODE_STOP_LPREGU PWR_CR1_LPDS /*!< Enter Stop mode (with low power Regulator ON) when the CPU enters deepsleep */
+#define LL_PWR_MODE_STOP_LPREGU_UNDERDRIVE (PWR_CR1_LPDS | PWR_CR1_LPUDS | PWR_CR1_FPDS) /*!< Enter Stop mode (with low power Regulator in under-drive mode) when the CPU enters deepsleep */
+#define LL_PWR_MODE_STANDBY PWR_CR1_PDDS /*!< Enter Standby mode when the CPU enters deepsleep */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EC_REGU_VOLTAGE Regulator Voltage
+ * @{
+ */
+#define LL_PWR_REGU_VOLTAGE_SCALE3 PWR_CR1_VOS_0
+#define LL_PWR_REGU_VOLTAGE_SCALE2 PWR_CR1_VOS_1
+#define LL_PWR_REGU_VOLTAGE_SCALE1 (PWR_CR1_VOS_0 | PWR_CR1_VOS_1)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE Regulator Mode In Deep Sleep Mode
+ * @{
+ */
+#define LL_PWR_REGU_DSMODE_MAIN 0x00000000U /*!< Voltage Regulator in main mode during deepsleep mode */
+#define LL_PWR_REGU_DSMODE_LOW_POWER PWR_CR1_LPDS /*!< Voltage Regulator in low-power mode during deepsleep mode */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EC_PVDLEVEL Power Voltage Detector Level
+ * @{
+ */
+#define LL_PWR_PVDLEVEL_0 PWR_CR1_PLS_LEV0 /*!< Voltage threshold detected by PVD 2.0 V */
+#define LL_PWR_PVDLEVEL_1 PWR_CR1_PLS_LEV1 /*!< Voltage threshold detected by PVD 2.1 V */
+#define LL_PWR_PVDLEVEL_2 PWR_CR1_PLS_LEV2 /*!< Voltage threshold detected by PVD 2.3 V */
+#define LL_PWR_PVDLEVEL_3 PWR_CR1_PLS_LEV3 /*!< Voltage threshold detected by PVD 2.5 V */
+#define LL_PWR_PVDLEVEL_4 PWR_CR1_PLS_LEV4 /*!< Voltage threshold detected by PVD 2.6 V */
+#define LL_PWR_PVDLEVEL_5 PWR_CR1_PLS_LEV5 /*!< Voltage threshold detected by PVD 2.7 V */
+#define LL_PWR_PVDLEVEL_6 PWR_CR1_PLS_LEV6 /*!< Voltage threshold detected by PVD 2.8 V */
+#define LL_PWR_PVDLEVEL_7 PWR_CR1_PLS_LEV7 /*!< Voltage threshold detected by PVD 2.9 V */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EC_WAKEUP_PIN Wakeup Pins
+ * @{
+ */
+#define LL_PWR_WAKEUP_PIN1 PWR_CSR2_EWUP1 /*!< WKUP pin 1 : PA0 */
+#define LL_PWR_WAKEUP_PIN2 PWR_CSR2_EWUP2 /*!< WKUP pin 2 : PA2 */
+#define LL_PWR_WAKEUP_PIN3 PWR_CSR2_EWUP3 /*!< WKUP pin 3 : PC1 */
+#define LL_PWR_WAKEUP_PIN4 PWR_CSR2_EWUP4 /*!< WKUP pin 4 : PC13 */
+#define LL_PWR_WAKEUP_PIN5 PWR_CSR2_EWUP5 /*!< WKUP pin 5 : PI8 */
+#define LL_PWR_WAKEUP_PIN6 PWR_CSR2_EWUP6 /*!< WKUP pin 6 : PI11 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros
+ * @{
+ */
+
+/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in PWR register
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in PWR register
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @defgroup PWR_LL_EF_Configuration Configuration
+ * @{
+ */
+
+/**
+ * @brief Enable Under Drive Mode
+ * @rmtoll CR1 UDEN LL_PWR_EnableUnderDriveMode
+ * @note This mode is enabled only with STOP low power mode.
+ * In this mode, the 1.2V domain is preserved in reduced leakage mode. This
+ * mode is only available when the main Regulator or the low power Regulator
+ * is in low voltage mode.
+ * @note If the Under-drive mode was enabled, it is automatically disabled after
+ * exiting Stop mode.
+ * When the voltage Regulator operates in Under-drive mode, an additional
+ * startup delay is induced when waking up from Stop mode.
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableUnderDriveMode(void)
+{
+ SET_BIT(PWR->CR1, PWR_CR1_UDEN);
+}
+
+/**
+ * @brief Disable Under Drive Mode
+ * @rmtoll CR1 UDEN LL_PWR_DisableUnderDriveMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableUnderDriveMode(void)
+{
+ CLEAR_BIT(PWR->CR1, PWR_CR1_UDEN);
+}
+
+/**
+ * @brief Check if Under Drive Mode is enabled
+ * @rmtoll CR1 UDEN LL_PWR_IsEnabledUnderDriveMode
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledUnderDriveMode(void)
+{
+ return (READ_BIT(PWR->CR1, PWR_CR1_UDEN) == (PWR_CR1_UDEN));
+}
+
+/**
+ * @brief Enable Over drive switching
+ * @rmtoll CR1 ODSWEN LL_PWR_EnableOverDriveSwitching
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableOverDriveSwitching(void)
+{
+ SET_BIT(PWR->CR1, PWR_CR1_ODSWEN);
+}
+
+/**
+ * @brief Disable Over drive switching
+ * @rmtoll CR1 ODSWEN LL_PWR_DisableOverDriveSwitching
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableOverDriveSwitching(void)
+{
+ CLEAR_BIT(PWR->CR1, PWR_CR1_ODSWEN);
+}
+
+/**
+ * @brief Check if Over drive switching is enabled
+ * @rmtoll CR1 ODSWEN LL_PWR_IsEnabledOverDriveSwitching
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledOverDriveSwitching(void)
+{
+ return (READ_BIT(PWR->CR1, PWR_CR1_ODSWEN) == (PWR_CR1_ODSWEN));
+}
+
+/**
+ * @brief Enable Over drive Mode
+ * @rmtoll CR1 ODEN LL_PWR_EnableOverDriveMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableOverDriveMode(void)
+{
+ SET_BIT(PWR->CR1, PWR_CR1_ODEN);
+}
+
+/**
+ * @brief Disable Over drive Mode
+ * @rmtoll CR1 ODEN LL_PWR_DisableOverDriveMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableOverDriveMode(void)
+{
+ CLEAR_BIT(PWR->CR1, PWR_CR1_ODEN);
+}
+
+/**
+ * @brief Check if Over drive switching is enabled
+ * @rmtoll CR1 ODEN LL_PWR_IsEnabledOverDriveMode
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledOverDriveMode(void)
+{
+ return (READ_BIT(PWR->CR1, PWR_CR1_ODEN) == (PWR_CR1_ODEN));
+}
+
+/**
+ * @brief Set the main internal Regulator output voltage
+ * @rmtoll CR1 VOS LL_PWR_SetRegulVoltageScaling
+ * @param VoltageScaling This parameter can be one of the following values:
+ * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1
+ * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2
+ * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE3
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_SetRegulVoltageScaling(uint32_t VoltageScaling)
+{
+ MODIFY_REG(PWR->CR1, PWR_CR1_VOS, VoltageScaling);
+}
+
+/**
+ * @brief Get the main internal Regulator output voltage
+ * @rmtoll CR1 VOS LL_PWR_GetRegulVoltageScaling
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1
+ * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2
+ * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE3
+ */
+__STATIC_INLINE uint32_t LL_PWR_GetRegulVoltageScaling(void)
+{
+ return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_VOS));
+}
+
+/**
+ * @brief Enable Main Regulator in deepsleep under-drive Mode
+ * @rmtoll CR1 MRUDS LL_PWR_EnableMainRegulatorDeepSleepUDMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableMainRegulatorDeepSleepUDMode(void)
+{
+ SET_BIT(PWR->CR1, PWR_CR1_MRUDS);
+}
+
+/**
+ * @brief Disable Main Regulator in deepsleep under-drive Mode
+ * @rmtoll CR1 MRUDS LL_PWR_DisableMainRegulatorDeepSleepUDMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableMainRegulatorDeepSleepUDMode(void)
+{
+ CLEAR_BIT(PWR->CR1, PWR_CR1_MRUDS);
+}
+
+/**
+ * @brief Check if Main Regulator in deepsleep under-drive Mode is enabled
+ * @rmtoll CR1 MRUDS LL_PWR_IsEnabledMainRegulatorDeepSleepUDMode
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledMainRegulatorDeepSleepUDMode(void)
+{
+ return (READ_BIT(PWR->CR1, PWR_CR1_MRUDS) == (PWR_CR1_MRUDS));
+}
+
+/**
+ * @brief Enable Low Power Regulator in deepsleep under-drive Mode
+ * @rmtoll CR1 LPUDS LL_PWR_EnableLowPowerRegulatorDeepSleepUDMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableLowPowerRegulatorDeepSleepUDMode(void)
+{
+ SET_BIT(PWR->CR1, PWR_CR1_LPUDS);
+}
+
+/**
+ * @brief Disable Low Power Regulator in deepsleep under-drive Mode
+ * @rmtoll CR1 LPUDS LL_PWR_DisableLowPowerRegulatorDeepSleepUDMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableLowPowerRegulatorDeepSleepUDMode(void)
+{
+ CLEAR_BIT(PWR->CR1, PWR_CR1_LPUDS);
+}
+
+/**
+ * @brief Check if Low Power Regulator in deepsleep under-drive Mode is enabled
+ * @rmtoll CR1 LPUDS LL_PWR_IsEnabledLowPowerRegulatorDeepSleepUDMode
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledLowPowerRegulatorDeepSleepUDMode(void)
+{
+ return (READ_BIT(PWR->CR1, PWR_CR1_LPUDS) == (PWR_CR1_LPUDS));
+}
+
+/**
+ * @brief Enable the Flash Power Down in Stop Mode
+ * @rmtoll CR1 FPDS LL_PWR_EnableFlashPowerDown
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableFlashPowerDown(void)
+{
+ SET_BIT(PWR->CR1, PWR_CR1_FPDS);
+}
+
+/**
+ * @brief Disable the Flash Power Down in Stop Mode
+ * @rmtoll CR1 FPDS LL_PWR_DisableFlashPowerDown
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableFlashPowerDown(void)
+{
+ CLEAR_BIT(PWR->CR1, PWR_CR1_FPDS);
+}
+
+/**
+ * @brief Check if the Flash Power Down in Stop Mode is enabled
+ * @rmtoll CR1 FPDS LL_PWR_IsEnabledFlashPowerDown
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledFlashPowerDown(void)
+{
+ return (READ_BIT(PWR->CR1, PWR_CR1_FPDS) == (PWR_CR1_FPDS));
+}
+
+/**
+ * @brief Enable access to the backup domain
+ * @rmtoll CR1 DBP LL_PWR_EnableBkUpAccess
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void)
+{
+ SET_BIT(PWR->CR1, PWR_CR1_DBP);
+}
+
+/**
+ * @brief Disable access to the backup domain
+ * @rmtoll CR1 DBP LL_PWR_DisableBkUpAccess
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void)
+{
+ CLEAR_BIT(PWR->CR1, PWR_CR1_DBP);
+}
+
+/**
+ * @brief Check if the backup domain is enabled
+ * @rmtoll CR1 DBP LL_PWR_IsEnabledBkUpAccess
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void)
+{
+ return (READ_BIT(PWR->CR1, PWR_CR1_DBP) == (PWR_CR1_DBP));
+}
+
+/**
+ * @brief Enable Backup Regulator
+ * @rmtoll CSR1 BRE LL_PWR_EnableBkUpRegulator
+ * @note When set, the Backup Regulator (used to maintain backup SRAM content in Standby and
+ * VBAT modes) is enabled. If BRE is reset, the backup Regulator is switched off. The backup
+ * SRAM can still be used but its content will be lost in the Standby and VBAT modes. Once set,
+ * the application must wait that the Backup Regulator Ready flag (BRR) is set to indicate that
+ * the data written into the RAM will be maintained in the Standby and VBAT modes.
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableBkUpRegulator(void)
+{
+ SET_BIT(PWR->CSR1, PWR_CSR1_BRE);
+}
+
+/**
+ * @brief Disable Backup Regulator
+ * @rmtoll CSR1 BRE LL_PWR_DisableBkUpRegulator
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableBkUpRegulator(void)
+{
+ CLEAR_BIT(PWR->CSR1, PWR_CSR1_BRE);
+}
+
+/**
+ * @brief Check if the backup Regulator is enabled
+ * @rmtoll CSR1 BRE LL_PWR_IsEnabledBkUpRegulator
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpRegulator(void)
+{
+ return (READ_BIT(PWR->CSR1, PWR_CSR1_BRE) == (PWR_CSR1_BRE));
+}
+
+/**
+ * @brief Set voltage Regulator mode during deep sleep mode
+ * @rmtoll CR1 LPDS LL_PWR_SetRegulModeDS
+ * @param RegulMode This parameter can be one of the following values:
+ * @arg @ref LL_PWR_REGU_DSMODE_MAIN
+ * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode)
+{
+ MODIFY_REG(PWR->CR1, PWR_CR1_LPDS, RegulMode);
+}
+
+/**
+ * @brief Get voltage Regulator mode during deep sleep mode
+ * @rmtoll CR1 LPDS LL_PWR_GetRegulModeDS
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_PWR_REGU_DSMODE_MAIN
+ * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
+ */
+__STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void)
+{
+ return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_LPDS));
+}
+
+/**
+ * @brief Set Power Down mode when CPU enters deepsleep
+ * @rmtoll CR1 PDDS LL_PWR_SetPowerMode\n
+ * CR1 LPDS LL_PWR_SetPowerMode\n
+ * CR1 FPDS LL_PWR_SetPowerMode\n
+ * CR1 LPUDS LL_PWR_SetPowerMode\n
+ * CR1 MRUDS LL_PWR_SetPowerMode
+ * @param PDMode This parameter can be one of the following values:
+ * @arg @ref LL_PWR_MODE_STOP_MAINREGU
+ * @arg @ref LL_PWR_MODE_STOP_MAINREGU_UNDERDRIVE
+ * @arg @ref LL_PWR_MODE_STOP_LPREGU
+ * @arg @ref LL_PWR_MODE_STOP_LPREGU_UNDERDRIVE
+ * @arg @ref LL_PWR_MODE_STANDBY
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t PDMode)
+{
+ MODIFY_REG(PWR->CR1, (PWR_CR1_PDDS | PWR_CR1_LPDS | PWR_CR1_FPDS | PWR_CR1_LPUDS | PWR_CR1_MRUDS), PDMode);
+}
+
+/**
+ * @brief Get Power Down mode when CPU enters deepsleep
+ * @rmtoll CR1 PDDS LL_PWR_GetPowerMode\n
+ * CR1 LPDS LL_PWR_GetPowerMode\n
+ * CR1 FPDS LL_PWR_GetPowerMode\n
+ * CR1 LPUDS LL_PWR_GetPowerMode\n
+ * CR1 MRUDS LL_PWR_GetPowerMode
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_PWR_MODE_STOP_MAINREGU
+ * @arg @ref LL_PWR_MODE_STOP_MAINREGU_UNDERDRIVE
+ * @arg @ref LL_PWR_MODE_STOP_LPREGU
+ * @arg @ref LL_PWR_MODE_STOP_LPREGU_UNDERDRIVE
+ * @arg @ref LL_PWR_MODE_STANDBY
+ */
+__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void)
+{
+ return (uint32_t)(READ_BIT(PWR->CR1, (PWR_CR1_PDDS | PWR_CR1_LPDS | PWR_CR1_FPDS | PWR_CR1_LPUDS | PWR_CR1_MRUDS)));
+}
+
+/**
+ * @brief Configure the voltage threshold detected by the Power Voltage Detector
+ * @rmtoll CR1 PLS LL_PWR_SetPVDLevel
+ * @param PVDLevel This parameter can be one of the following values:
+ * @arg @ref LL_PWR_PVDLEVEL_0
+ * @arg @ref LL_PWR_PVDLEVEL_1
+ * @arg @ref LL_PWR_PVDLEVEL_2
+ * @arg @ref LL_PWR_PVDLEVEL_3
+ * @arg @ref LL_PWR_PVDLEVEL_4
+ * @arg @ref LL_PWR_PVDLEVEL_5
+ * @arg @ref LL_PWR_PVDLEVEL_6
+ * @arg @ref LL_PWR_PVDLEVEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel)
+{
+ MODIFY_REG(PWR->CR1, PWR_CR1_PLS, PVDLevel);
+}
+
+/**
+ * @brief Get the voltage threshold detection
+ * @rmtoll CR1 PLS LL_PWR_GetPVDLevel
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_PWR_PVDLEVEL_0
+ * @arg @ref LL_PWR_PVDLEVEL_1
+ * @arg @ref LL_PWR_PVDLEVEL_2
+ * @arg @ref LL_PWR_PVDLEVEL_3
+ * @arg @ref LL_PWR_PVDLEVEL_4
+ * @arg @ref LL_PWR_PVDLEVEL_5
+ * @arg @ref LL_PWR_PVDLEVEL_6
+ * @arg @ref LL_PWR_PVDLEVEL_7
+ */
+__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void)
+{
+ return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_PLS));
+}
+
+/**
+ * @brief Enable Power Voltage Detector
+ * @rmtoll CR1 PVDE LL_PWR_EnablePVD
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnablePVD(void)
+{
+ SET_BIT(PWR->CR1, PWR_CR1_PVDE);
+}
+
+/**
+ * @brief Disable Power Voltage Detector
+ * @rmtoll CR1 PVDE LL_PWR_DisablePVD
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisablePVD(void)
+{
+ CLEAR_BIT(PWR->CR1, PWR_CR1_PVDE);
+}
+
+/**
+ * @brief Check if Power Voltage Detector is enabled
+ * @rmtoll CR1 PVDE LL_PWR_IsEnabledPVD
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void)
+{
+ return (READ_BIT(PWR->CR1, PWR_CR1_PVDE) == (PWR_CR1_PVDE));
+}
+
+/**
+ * @brief Enable the WakeUp PINx functionality
+ * @rmtoll CSR2 EWUP1 LL_PWR_EnableWakeUpPin\n
+ * CSR2 EWUP2 LL_PWR_EnableWakeUpPin\n
+ * CSR2 EWUP3 LL_PWR_EnableWakeUpPin\n
+ * CSR2 EWUP4 LL_PWR_EnableWakeUpPin\n
+ * CSR2 EWUP5 LL_PWR_EnableWakeUpPin\n
+ * CSR2 EWUP6 LL_PWR_EnableWakeUpPin
+ * @param WakeUpPin This parameter can be one of the following values:
+ * @arg @ref LL_PWR_WAKEUP_PIN1
+ * @arg @ref LL_PWR_WAKEUP_PIN2
+ * @arg @ref LL_PWR_WAKEUP_PIN3
+ * @arg @ref LL_PWR_WAKEUP_PIN4
+ * @arg @ref LL_PWR_WAKEUP_PIN5
+ * @arg @ref LL_PWR_WAKEUP_PIN6
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin)
+{
+ SET_BIT(PWR->CSR2, WakeUpPin);
+}
+
+/**
+ * @brief Disable the WakeUp PINx functionality
+ * @rmtoll CSR2 EWUP1 LL_PWR_DisableWakeUpPin\n
+ * CSR2 EWUP2 LL_PWR_DisableWakeUpPin\n
+ * CSR2 EWUP3 LL_PWR_DisableWakeUpPin\n
+ * CSR2 EWUP4 LL_PWR_DisableWakeUpPin\n
+ * CSR2 EWUP5 LL_PWR_DisableWakeUpPin\n
+ * CSR2 EWUP6 LL_PWR_DisableWakeUpPin
+ * @param WakeUpPin This parameter can be one of the following values:
+ * @arg @ref LL_PWR_WAKEUP_PIN1
+ * @arg @ref LL_PWR_WAKEUP_PIN2
+ * @arg @ref LL_PWR_WAKEUP_PIN3
+ * @arg @ref LL_PWR_WAKEUP_PIN4
+ * @arg @ref LL_PWR_WAKEUP_PIN5
+ * @arg @ref LL_PWR_WAKEUP_PIN6
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin)
+{
+ CLEAR_BIT(PWR->CSR2, WakeUpPin);
+}
+
+/**
+ * @brief Check if the WakeUp PINx functionality is enabled
+ * @rmtoll CSR2 EWUP1 LL_PWR_IsEnabledWakeUpPin\n
+ * CSR2 EWUP2 LL_PWR_IsEnabledWakeUpPin\n
+ * CSR2 EWUP3 LL_PWR_IsEnabledWakeUpPin\n
+ * CSR2 EWUP4 LL_PWR_IsEnabledWakeUpPin\n
+ * CSR2 EWUP5 LL_PWR_IsEnabledWakeUpPin\n
+ * CSR2 EWUP6 LL_PWR_IsEnabledWakeUpPin
+ * @param WakeUpPin This parameter can be one of the following values:
+ * @arg @ref LL_PWR_WAKEUP_PIN1
+ * @arg @ref LL_PWR_WAKEUP_PIN2
+ * @arg @ref LL_PWR_WAKEUP_PIN3
+ * @arg @ref LL_PWR_WAKEUP_PIN4
+ * @arg @ref LL_PWR_WAKEUP_PIN5
+ * @arg @ref LL_PWR_WAKEUP_PIN6
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin)
+{
+ return (READ_BIT(PWR->CSR2, WakeUpPin) == (WakeUpPin));
+}
+
+/**
+ * @brief Set the Wake-Up pin polarity low for the event detection
+ * @rmtoll CR2 WUPP1 LL_PWR_SetWakeUpPinPolarityLow\n
+ * CR2 WUPP2 LL_PWR_SetWakeUpPinPolarityLow\n
+ * CR2 WUPP3 LL_PWR_SetWakeUpPinPolarityLow\n
+ * CR2 WUPP4 LL_PWR_SetWakeUpPinPolarityLow\n
+ * CR2 WUPP5 LL_PWR_SetWakeUpPinPolarityLow\n
+ * CR2 WUPP6 LL_PWR_SetWakeUpPinPolarityLow
+ * @param WakeUpPin This parameter can be one of the following values:
+ * @arg @ref LL_PWR_WAKEUP_PIN1
+ * @arg @ref LL_PWR_WAKEUP_PIN2
+ * @arg @ref LL_PWR_WAKEUP_PIN3
+ * @arg @ref LL_PWR_WAKEUP_PIN4
+ * @arg @ref LL_PWR_WAKEUP_PIN5
+ * @arg @ref LL_PWR_WAKEUP_PIN6
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityLow(uint32_t WakeUpPin)
+{
+ SET_BIT(PWR->CR2, WakeUpPin);
+}
+
+/**
+ * @brief Set the Wake-Up pin polarity high for the event detection
+ * @rmtoll CR2 WUPP1 LL_PWR_SetWakeUpPinPolarityHigh\n
+ * CR2 WUPP2 LL_PWR_SetWakeUpPinPolarityHigh\n
+ * CR2 WUPP3 LL_PWR_SetWakeUpPinPolarityHigh\n
+ * CR2 WUPP4 LL_PWR_SetWakeUpPinPolarityHigh\n
+ * CR2 WUPP5 LL_PWR_SetWakeUpPinPolarityHigh\n
+ * CR2 WUPP6 LL_PWR_SetWakeUpPinPolarityHigh
+ * @param WakeUpPin This parameter can be one of the following values:
+ * @arg @ref LL_PWR_WAKEUP_PIN1
+ * @arg @ref LL_PWR_WAKEUP_PIN2
+ * @arg @ref LL_PWR_WAKEUP_PIN3
+ * @arg @ref LL_PWR_WAKEUP_PIN4
+ * @arg @ref LL_PWR_WAKEUP_PIN5
+ * @arg @ref LL_PWR_WAKEUP_PIN6
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityHigh(uint32_t WakeUpPin)
+{
+ CLEAR_BIT(PWR->CR2, WakeUpPin);
+}
+
+/**
+ * @brief Get the Wake-Up pin polarity for the event detection
+ * @rmtoll CR2 WUPP1 LL_PWR_IsWakeUpPinPolarityLow\n
+ * CR2 WUPP2 LL_PWR_IsWakeUpPinPolarityLow\n
+ * CR2 WUPP3 LL_PWR_IsWakeUpPinPolarityLow\n
+ * CR2 WUPP4 LL_PWR_IsWakeUpPinPolarityLow\n
+ * CR2 WUPP5 LL_PWR_IsWakeUpPinPolarityLow\n
+ * CR2 WUPP6 LL_PWR_IsWakeUpPinPolarityLow
+ * @param WakeUpPin This parameter can be one of the following values:
+ * @arg @ref LL_PWR_WAKEUP_PIN1
+ * @arg @ref LL_PWR_WAKEUP_PIN2
+ * @arg @ref LL_PWR_WAKEUP_PIN3
+ * @arg @ref LL_PWR_WAKEUP_PIN4
+ * @arg @ref LL_PWR_WAKEUP_PIN5
+ * @arg @ref LL_PWR_WAKEUP_PIN6
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsWakeUpPinPolarityLow(uint32_t WakeUpPin)
+{
+ return (READ_BIT(PWR->CR2, WakeUpPin) == (WakeUpPin));
+}
+
+/**
+ * @brief Enable Internal WakeUp
+ * @rmtoll CSR1 EIWUP LL_PWR_EnableInternalWakeUp
+ * @note This API must be used when RTC events (Alarm A or Alarm B, RTC Tamper, RTC TimeStamp
+ * or RTC Wakeup time) are used to wake up the system from Standby mode.
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableInternalWakeUp(void)
+{
+ SET_BIT(PWR->CSR1, PWR_CSR1_EIWUP);
+}
+
+/**
+ * @brief Disable Internal WakeUp
+ * @rmtoll CSR1 EIWUP LL_PWR_DisableInternalWakeUp
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableInternalWakeUp(void)
+{
+ CLEAR_BIT(PWR->CSR1, PWR_CSR1_EIWUP);
+}
+
+/**
+ * @brief Check if the Internal WakeUp functionality is enabled
+ * @rmtoll CSR1 EIWUP LL_PWR_IsEnabledInternalWakeUp
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledInternalWakeUp(void)
+{
+ return (READ_BIT(PWR->CSR1, PWR_CSR1_EIWUP) == (PWR_CSR1_EIWUP));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management
+ * @{
+ */
+
+/**
+ * @brief Get Wake-up Flag 6
+ * @rmtoll CSR2 WUPF6 LL_PWR_IsActiveFlag_WU6
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU6(void)
+{
+ return (READ_BIT(PWR->CSR2, PWR_CSR2_WUPF6) == (PWR_CSR2_WUPF6));
+}
+
+/**
+ * @brief Get Wake-up Flag 5
+ * @rmtoll CSR2 WUPF5 LL_PWR_IsActiveFlag_WU5
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU5(void)
+{
+ return (READ_BIT(PWR->CSR2, PWR_CSR2_WUPF5) == (PWR_CSR2_WUPF5));
+}
+
+/**
+ * @brief Get Wake-up Flag 4
+ * @rmtoll CSR2 WUPF4 LL_PWR_IsActiveFlag_WU4
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU4(void)
+{
+ return (READ_BIT(PWR->CSR2, PWR_CSR2_WUPF4) == (PWR_CSR2_WUPF4));
+}
+
+/**
+ * @brief Get Wake-up Flag 3
+ * @rmtoll CSR2 WUPF3 LL_PWR_IsActiveFlag_WU3
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU3(void)
+{
+ return (READ_BIT(PWR->CSR2, PWR_CSR2_WUPF3) == (PWR_CSR2_WUPF3));
+}
+
+/**
+ * @brief Get Wake-up Flag 2
+ * @rmtoll CSR2 WUPF2 LL_PWR_IsActiveFlag_WU2
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU2(void)
+{
+ return (READ_BIT(PWR->CSR2, PWR_CSR2_WUPF2) == (PWR_CSR2_WUPF2));
+}
+
+/**
+ * @brief Get Wake-up Flag 1
+ * @rmtoll CSR2 WUPF1 LL_PWR_IsActiveFlag_WU1
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU1(void)
+{
+ return (READ_BIT(PWR->CSR2, PWR_CSR2_WUPF1) == (PWR_CSR2_WUPF1));
+}
+
+/**
+ * @brief Get Standby Flag
+ * @rmtoll CSR1 SBF LL_PWR_IsActiveFlag_SB
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void)
+{
+ return (READ_BIT(PWR->CSR1, PWR_CSR1_SBF) == (PWR_CSR1_SBF));
+}
+
+/**
+ * @brief Indicate whether VDD voltage is below the selected PVD threshold
+ * @rmtoll CSR1 PVDO LL_PWR_IsActiveFlag_PVDO
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void)
+{
+ return (READ_BIT(PWR->CSR1, PWR_CSR1_PVDO) == (PWR_CSR1_PVDO));
+}
+
+/**
+ * @brief Get Backup Regulator ready Flag
+ * @rmtoll CSR1 BRR LL_PWR_IsActiveFlag_BRR
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_BRR(void)
+{
+ return (READ_BIT(PWR->CSR1, PWR_CSR1_BRR) == (PWR_CSR1_BRR));
+}
+
+/**
+ * @brief Indicate whether the Regulator is ready in the selected voltage range or if its output voltage is still changing to the required voltage level
+ * @rmtoll CSR1 VOSRDY LL_PWR_IsActiveFlag_VOS
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VOS(void)
+{
+ return (READ_BIT(PWR->CSR1, PWR_CSR1_VOSRDY) == (PWR_CSR1_VOSRDY));
+}
+
+/**
+ * @brief Indicate whether the Over-Drive mode is ready or not
+ * @rmtoll CSR1 ODRDY LL_PWR_IsActiveFlag_OD
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_OD(void)
+{
+ return (READ_BIT(PWR->CSR1, PWR_CSR1_ODRDY) == (PWR_CSR1_ODRDY));
+}
+
+/**
+ * @brief Indicate whether the Over-Drive mode switching is ready or not
+ * @rmtoll CSR1 ODSWRDY LL_PWR_IsActiveFlag_ODSW
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_ODSW(void)
+{
+ return (READ_BIT(PWR->CSR1, PWR_CSR1_ODSWRDY) == (PWR_CSR1_ODSWRDY));
+}
+
+/**
+ * @brief Indicate whether the Under-Drive mode is ready or not
+ * @rmtoll CSR1 UDRDY LL_PWR_IsActiveFlag_UD
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_UD(void)
+{
+ return (READ_BIT(PWR->CSR1, PWR_CSR1_UDRDY) == (PWR_CSR1_UDRDY));
+}
+
+/**
+ * @brief Clear Standby Flag
+ * @rmtoll CR1 CSBF LL_PWR_ClearFlag_SB
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ClearFlag_SB(void)
+{
+ SET_BIT(PWR->CR1, PWR_CR1_CSBF);
+}
+
+/**
+ * @brief Clear Wake-up Flag 6
+ * @rmtoll CR2 CWUF6 LL_PWR_ClearFlag_WU6
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ClearFlag_WU6(void)
+{
+ WRITE_REG(PWR->CR2, PWR_CR2_CWUPF6);
+}
+
+/**
+ * @brief Clear Wake-up Flag 5
+ * @rmtoll CR2 CWUF5 LL_PWR_ClearFlag_WU5
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ClearFlag_WU5(void)
+{
+ WRITE_REG(PWR->CR2, PWR_CR2_CWUPF5);
+}
+
+/**
+ * @brief Clear Wake-up Flag 4
+ * @rmtoll CR2 CWUF4 LL_PWR_ClearFlag_WU4
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ClearFlag_WU4(void)
+{
+ WRITE_REG(PWR->CR2, PWR_CR2_CWUPF4);
+}
+
+/**
+ * @brief Clear Wake-up Flag 3
+ * @rmtoll CR2 CWUF3 LL_PWR_ClearFlag_WU3
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ClearFlag_WU3(void)
+{
+ WRITE_REG(PWR->CR2, PWR_CR2_CWUPF3);
+}
+
+/**
+ * @brief Clear Wake-up Flag 2
+ * @rmtoll CR2 CWUF2 LL_PWR_ClearFlag_WU2
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ClearFlag_WU2(void)
+{
+ WRITE_REG(PWR->CR2, PWR_CR2_CWUPF2);
+}
+
+/**
+ * @brief Clear Wake-up Flag 1
+ * @rmtoll CR2 CWUF1 LL_PWR_ClearFlag_WU1
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ClearFlag_WU1(void)
+{
+ WRITE_REG(PWR->CR2, PWR_CR2_CWUPF1);
+}
+
+/**
+ * @brief Clear Under-Drive ready Flag
+ * @rmtoll CSR1 UDRDY LL_PWR_ClearFlag_UD
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ClearFlag_UD(void)
+{
+ WRITE_REG(PWR->CSR1, PWR_CSR1_UDRDY);
+}
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup PWR_LL_EF_Init De-initialization function
+ * @{
+ */
+ErrorStatus LL_PWR_DeInit(void);
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(PWR) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_LL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h
new file mode 100644
index 00000000..b90bb2ae
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h
@@ -0,0 +1,5181 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_ll_rcc.h
+ * @author MCD Application Team
+ * @brief Header file of RCC LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_LL_RCC_H
+#define __STM32F7xx_LL_RCC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx.h"
+
+/** @addtogroup STM32F7xx_LL_Driver
+ * @{
+ */
+
+#if defined(RCC)
+
+/** @defgroup RCC_LL RCC
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup RCC_LL_Private_Variables RCC Private Variables
+ * @{
+ */
+
+#if defined(RCC_DCKCFGR1_PLLSAIDIVR)
+static const uint8_t aRCC_PLLSAIDIVRPrescTable[4] = {2, 4, 8, 16};
+#endif /* RCC_DCKCFGR1_PLLSAIDIVR */
+
+/**
+ * @}
+ */
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RCC_LL_Private_Macros RCC Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RCC_LL_Exported_Types RCC Exported Types
+ * @{
+ */
+
+/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure
+ * @{
+ */
+
+/**
+ * @brief RCC Clocks Frequency Structure
+ */
+typedef struct
+{
+ uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */
+ uint32_t HCLK_Frequency; /*!< HCLK clock frequency */
+ uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */
+ uint32_t PCLK2_Frequency; /*!< PCLK2 clock frequency */
+} LL_RCC_ClocksTypeDef;
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants
+ * @{
+ */
+
+/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation
+ * @brief Defines used to adapt values of different oscillators
+ * @note These values could be modified in the user environment according to
+ * HW set-up.
+ * @{
+ */
+#if !defined (HSE_VALUE)
+#define HSE_VALUE 25000000U /*!< Value of the HSE oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+#define HSI_VALUE 16000000U /*!< Value of the HSI oscillator in Hz */
+#endif /* HSI_VALUE */
+
+#if !defined (LSE_VALUE)
+#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined (LSI_VALUE)
+#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */
+#endif /* LSI_VALUE */
+
+#if !defined (EXTERNAL_CLOCK_VALUE)
+#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the I2S_CKIN external oscillator in Hz */
+#endif /* EXTERNAL_CLOCK_VALUE */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_CLEAR_FLAG Clear Flags Defines
+ * @brief Flags defines which can be used with LL_RCC_WriteReg function
+ * @{
+ */
+#define LL_RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC /*!< LSI Ready Interrupt Clear */
+#define LL_RCC_CIR_LSERDYC RCC_CIR_LSERDYC /*!< LSE Ready Interrupt Clear */
+#define LL_RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC /*!< HSI Ready Interrupt Clear */
+#define LL_RCC_CIR_HSERDYC RCC_CIR_HSERDYC /*!< HSE Ready Interrupt Clear */
+#define LL_RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC /*!< PLL Ready Interrupt Clear */
+#define LL_RCC_CIR_PLLI2SRDYC RCC_CIR_PLLI2SRDYC /*!< PLLI2S Ready Interrupt Clear */
+#define LL_RCC_CIR_PLLSAIRDYC RCC_CIR_PLLSAIRDYC /*!< PLLSAI Ready Interrupt Clear */
+#define LL_RCC_CIR_CSSC RCC_CIR_CSSC /*!< Clock Security System Interrupt Clear */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_RCC_ReadReg function
+ * @{
+ */
+#define LL_RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF /*!< LSI Ready Interrupt flag */
+#define LL_RCC_CIR_LSERDYF RCC_CIR_LSERDYF /*!< LSE Ready Interrupt flag */
+#define LL_RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF /*!< HSI Ready Interrupt flag */
+#define LL_RCC_CIR_HSERDYF RCC_CIR_HSERDYF /*!< HSE Ready Interrupt flag */
+#define LL_RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF /*!< PLL Ready Interrupt flag */
+#define LL_RCC_CIR_PLLI2SRDYF RCC_CIR_PLLI2SRDYF /*!< PLLI2S Ready Interrupt flag */
+#define LL_RCC_CIR_PLLSAIRDYF RCC_CIR_PLLSAIRDYF /*!< PLLSAI Ready Interrupt flag */
+#define LL_RCC_CIR_CSSF RCC_CIR_CSSF /*!< Clock Security System Interrupt flag */
+#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */
+#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */
+#define LL_RCC_CSR_PORRSTF RCC_CSR_PORRSTF /*!< POR/PDR reset flag */
+#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */
+#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */
+#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */
+#define LL_RCC_CSR_BORRSTF RCC_CSR_BORRSTF /*!< BOR reset flag */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_IT IT Defines
+ * @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions
+ * @{
+ */
+#define LL_RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE /*!< LSI Ready Interrupt Enable */
+#define LL_RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE /*!< LSE Ready Interrupt Enable */
+#define LL_RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE /*!< HSI Ready Interrupt Enable */
+#define LL_RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE /*!< HSE Ready Interrupt Enable */
+#define LL_RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE /*!< PLL Ready Interrupt Enable */
+#define LL_RCC_CIR_PLLI2SRDYIE RCC_CIR_PLLI2SRDYIE /*!< PLLI2S Ready Interrupt Enable */
+#define LL_RCC_CIR_PLLSAIRDYIE RCC_CIR_PLLSAIRDYIE /*!< PLLSAI Ready Interrupt Enable */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_LSEDRIVE LSE oscillator drive capability
+ * @{
+ */
+#define LL_RCC_LSEDRIVE_LOW 0x00000000U /*!< Xtal mode lower driving capability */
+#define LL_RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium high driving capability */
+#define LL_RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_1 /*!< Xtal mode medium low driving capability */
+#define LL_RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch
+ * @{
+ */
+#define LL_RCC_SYS_CLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selection as system clock */
+#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selection as system clock */
+#define LL_RCC_SYS_CLKSOURCE_PLL RCC_CFGR_SW_PLL /*!< PLL selection as system clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status
+ * @{
+ */
+#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */
+#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */
+#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL RCC_CFGR_SWS_PLL /*!< PLL used as system clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler
+ * @{
+ */
+#define LL_RCC_SYSCLK_DIV_1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */
+#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */
+#define LL_RCC_SYSCLK_DIV_4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */
+#define LL_RCC_SYSCLK_DIV_8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */
+#define LL_RCC_SYSCLK_DIV_16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */
+#define LL_RCC_SYSCLK_DIV_64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */
+#define LL_RCC_SYSCLK_DIV_128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */
+#define LL_RCC_SYSCLK_DIV_256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */
+#define LL_RCC_SYSCLK_DIV_512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1)
+ * @{
+ */
+#define LL_RCC_APB1_DIV_1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */
+#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */
+#define LL_RCC_APB1_DIV_4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */
+#define LL_RCC_APB1_DIV_8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */
+#define LL_RCC_APB1_DIV_16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */
+/**
+ * @}
+ */
+/** @defgroup RCC_LL_EC_APB2_DIV APB high-speed prescaler (APB2)
+ * @{
+ */
+#define LL_RCC_APB2_DIV_1 RCC_CFGR_PPRE2_DIV1 /*!< HCLK not divided */
+#define LL_RCC_APB2_DIV_2 RCC_CFGR_PPRE2_DIV2 /*!< HCLK divided by 2 */
+#define LL_RCC_APB2_DIV_4 RCC_CFGR_PPRE2_DIV4 /*!< HCLK divided by 4 */
+#define LL_RCC_APB2_DIV_8 RCC_CFGR_PPRE2_DIV8 /*!< HCLK divided by 8 */
+#define LL_RCC_APB2_DIV_16 RCC_CFGR_PPRE2_DIV16 /*!< HCLK divided by 16 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_MCOxSOURCE MCO source selection
+ * @{
+ */
+#define LL_RCC_MCO1SOURCE_HSI (uint32_t)(RCC_CFGR_MCO1|0x00000000U) /*!< HSI selection as MCO1 source */
+#define LL_RCC_MCO1SOURCE_LSE (uint32_t)(RCC_CFGR_MCO1|(RCC_CFGR_MCO1_0 >> 16U)) /*!< LSE selection as MCO1 source */
+#define LL_RCC_MCO1SOURCE_HSE (uint32_t)(RCC_CFGR_MCO1|(RCC_CFGR_MCO1_1 >> 16U)) /*!< HSE selection as MCO1 source */
+#define LL_RCC_MCO1SOURCE_PLLCLK (uint32_t)(RCC_CFGR_MCO1|((RCC_CFGR_MCO1_1|RCC_CFGR_MCO1_0) >> 16U)) /*!< PLLCLK selection as MCO1 source */
+#define LL_RCC_MCO2SOURCE_SYSCLK (uint32_t)(RCC_CFGR_MCO2|0x00000000U) /*!< SYSCLK selection as MCO2 source */
+#define LL_RCC_MCO2SOURCE_PLLI2S (uint32_t)(RCC_CFGR_MCO2|(RCC_CFGR_MCO2_0 >> 16U)) /*!< PLLI2S selection as MCO2 source */
+#define LL_RCC_MCO2SOURCE_HSE (uint32_t)(RCC_CFGR_MCO2|(RCC_CFGR_MCO2_1 >> 16U)) /*!< HSE selection as MCO2 source */
+#define LL_RCC_MCO2SOURCE_PLLCLK (uint32_t)(RCC_CFGR_MCO2|((RCC_CFGR_MCO2_1|RCC_CFGR_MCO2_0) >> 16U)) /*!< PLLCLK selection as MCO2 source */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_MCOx_DIV MCO prescaler
+ * @{
+ */
+#define LL_RCC_MCO1_DIV_1 (uint32_t)(RCC_CFGR_MCO1PRE|0x00000000U) /*!< MCO1 not divided */
+#define LL_RCC_MCO1_DIV_2 (uint32_t)(RCC_CFGR_MCO1PRE|(RCC_CFGR_MCO1PRE_2 >> 16U)) /*!< MCO1 divided by 2 */
+#define LL_RCC_MCO1_DIV_3 (uint32_t)(RCC_CFGR_MCO1PRE|((RCC_CFGR_MCO1PRE_2|RCC_CFGR_MCO1PRE_0) >> 16U)) /*!< MCO1 divided by 3 */
+#define LL_RCC_MCO1_DIV_4 (uint32_t)(RCC_CFGR_MCO1PRE|((RCC_CFGR_MCO1PRE_2|RCC_CFGR_MCO1PRE_1) >> 16U)) /*!< MCO1 divided by 4 */
+#define LL_RCC_MCO1_DIV_5 (uint32_t)(RCC_CFGR_MCO1PRE|(RCC_CFGR_MCO1PRE >> 16U)) /*!< MCO1 divided by 5 */
+#define LL_RCC_MCO2_DIV_1 (uint32_t)(RCC_CFGR_MCO2PRE|0x00000000U) /*!< MCO2 not divided */
+#define LL_RCC_MCO2_DIV_2 (uint32_t)(RCC_CFGR_MCO2PRE|(RCC_CFGR_MCO2PRE_2 >> 16U)) /*!< MCO2 divided by 2 */
+#define LL_RCC_MCO2_DIV_3 (uint32_t)(RCC_CFGR_MCO2PRE|((RCC_CFGR_MCO2PRE_2|RCC_CFGR_MCO2PRE_0) >> 16U)) /*!< MCO2 divided by 3 */
+#define LL_RCC_MCO2_DIV_4 (uint32_t)(RCC_CFGR_MCO2PRE|((RCC_CFGR_MCO2PRE_2|RCC_CFGR_MCO2PRE_1) >> 16U)) /*!< MCO2 divided by 4 */
+#define LL_RCC_MCO2_DIV_5 (uint32_t)(RCC_CFGR_MCO2PRE|(RCC_CFGR_MCO2PRE >> 16U)) /*!< MCO2 divided by 5 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_RTC_HSEDIV HSE prescaler for RTC clock
+ * @{
+ */
+#define LL_RCC_RTC_NOCLOCK 0x00000000U /*!< HSE not divided */
+#define LL_RCC_RTC_HSE_DIV_2 RCC_CFGR_RTCPRE_1 /*!< HSE clock divided by 2 */
+#define LL_RCC_RTC_HSE_DIV_3 (RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 3 */
+#define LL_RCC_RTC_HSE_DIV_4 RCC_CFGR_RTCPRE_2 /*!< HSE clock divided by 4 */
+#define LL_RCC_RTC_HSE_DIV_5 (RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 5 */
+#define LL_RCC_RTC_HSE_DIV_6 (RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 6 */
+#define LL_RCC_RTC_HSE_DIV_7 (RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 7 */
+#define LL_RCC_RTC_HSE_DIV_8 RCC_CFGR_RTCPRE_3 /*!< HSE clock divided by 8 */
+#define LL_RCC_RTC_HSE_DIV_9 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 9 */
+#define LL_RCC_RTC_HSE_DIV_10 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 10 */
+#define LL_RCC_RTC_HSE_DIV_11 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 11 */
+#define LL_RCC_RTC_HSE_DIV_12 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) /*!< HSE clock divided by 12 */
+#define LL_RCC_RTC_HSE_DIV_13 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 13 */
+#define LL_RCC_RTC_HSE_DIV_14 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 14 */
+#define LL_RCC_RTC_HSE_DIV_15 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 15 */
+#define LL_RCC_RTC_HSE_DIV_16 RCC_CFGR_RTCPRE_4 /*!< HSE clock divided by 16 */
+#define LL_RCC_RTC_HSE_DIV_17 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 17 */
+#define LL_RCC_RTC_HSE_DIV_18 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 18 */
+#define LL_RCC_RTC_HSE_DIV_19 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 19 */
+#define LL_RCC_RTC_HSE_DIV_20 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2) /*!< HSE clock divided by 20 */
+#define LL_RCC_RTC_HSE_DIV_21 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 21 */
+#define LL_RCC_RTC_HSE_DIV_22 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 22 */
+#define LL_RCC_RTC_HSE_DIV_23 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 23 */
+#define LL_RCC_RTC_HSE_DIV_24 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3) /*!< HSE clock divided by 24 */
+#define LL_RCC_RTC_HSE_DIV_25 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 25 */
+#define LL_RCC_RTC_HSE_DIV_26 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 26 */
+#define LL_RCC_RTC_HSE_DIV_27 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 27 */
+#define LL_RCC_RTC_HSE_DIV_28 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) /*!< HSE clock divided by 28 */
+#define LL_RCC_RTC_HSE_DIV_29 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 29 */
+#define LL_RCC_RTC_HSE_DIV_30 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 30 */
+#define LL_RCC_RTC_HSE_DIV_31 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 31 */
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency
+ * @{
+ */
+#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */
+#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/** @defgroup RCC_LL_EC_USARTx_CLKSOURCE Peripheral USART clock source selection
+ * @{
+ */
+#define LL_RCC_USART1_CLKSOURCE_PCLK2 (uint32_t)((RCC_DCKCFGR2_USART1SEL << 16U) | 0x00000000U) /*!< PCLK2 clock used as USART1 clock source */
+#define LL_RCC_USART1_CLKSOURCE_SYSCLK (uint32_t)((RCC_DCKCFGR2_USART1SEL << 16U) | RCC_DCKCFGR2_USART1SEL_0) /*!< SYSCLK clock used as USART1 clock source */
+#define LL_RCC_USART1_CLKSOURCE_HSI (uint32_t)((RCC_DCKCFGR2_USART1SEL << 16U) | RCC_DCKCFGR2_USART1SEL_1) /*!< HSI clock used as USART1 clock source */
+#define LL_RCC_USART1_CLKSOURCE_LSE (uint32_t)((RCC_DCKCFGR2_USART1SEL << 16U) | RCC_DCKCFGR2_USART1SEL) /*!< LSE clock used as USART1 clock source */
+#define LL_RCC_USART2_CLKSOURCE_PCLK1 (uint32_t)((RCC_DCKCFGR2_USART2SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as USART2 clock source */
+#define LL_RCC_USART2_CLKSOURCE_SYSCLK (uint32_t)((RCC_DCKCFGR2_USART2SEL << 16U) | RCC_DCKCFGR2_USART2SEL_0) /*!< SYSCLK clock used as USART2 clock source */
+#define LL_RCC_USART2_CLKSOURCE_HSI (uint32_t)((RCC_DCKCFGR2_USART2SEL << 16U) | RCC_DCKCFGR2_USART2SEL_1) /*!< HSI clock used as USART2 clock source */
+#define LL_RCC_USART2_CLKSOURCE_LSE (uint32_t)((RCC_DCKCFGR2_USART2SEL << 16U) | RCC_DCKCFGR2_USART2SEL) /*!< LSE clock used as USART2 clock source */
+#define LL_RCC_USART3_CLKSOURCE_PCLK1 (uint32_t)((RCC_DCKCFGR2_USART3SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as USART3 clock source */
+#define LL_RCC_USART3_CLKSOURCE_SYSCLK (uint32_t)((RCC_DCKCFGR2_USART3SEL << 16U) | RCC_DCKCFGR2_USART3SEL_0) /*!< SYSCLK clock used as USART3 clock source */
+#define LL_RCC_USART3_CLKSOURCE_HSI (uint32_t)((RCC_DCKCFGR2_USART3SEL << 16U) | RCC_DCKCFGR2_USART3SEL_1) /*!< HSI clock used as USART3 clock source */
+#define LL_RCC_USART3_CLKSOURCE_LSE (uint32_t)((RCC_DCKCFGR2_USART3SEL << 16U) | RCC_DCKCFGR2_USART3SEL) /*!< LSE clock used as USART3 clock source */
+#define LL_RCC_USART6_CLKSOURCE_PCLK2 (uint32_t)((RCC_DCKCFGR2_USART6SEL << 16U) | 0x00000000U) /*!< PCLK2 clock used as USART6 clock source */
+#define LL_RCC_USART6_CLKSOURCE_SYSCLK (uint32_t)((RCC_DCKCFGR2_USART6SEL << 16U) | RCC_DCKCFGR2_USART6SEL_0) /*!< SYSCLK clock used as USART6 clock source */
+#define LL_RCC_USART6_CLKSOURCE_HSI (uint32_t)((RCC_DCKCFGR2_USART6SEL << 16U) | RCC_DCKCFGR2_USART6SEL_1) /*!< HSI clock used as USART6 clock source */
+#define LL_RCC_USART6_CLKSOURCE_LSE (uint32_t)((RCC_DCKCFGR2_USART6SEL << 16U) | RCC_DCKCFGR2_USART6SEL) /*!< LSE clock used as USART6 clock source */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_UARTx_CLKSOURCE Peripheral UART clock source selection
+ * @{
+ */
+#define LL_RCC_UART4_CLKSOURCE_PCLK1 (uint32_t)((RCC_DCKCFGR2_UART4SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as UART4 clock source */
+#define LL_RCC_UART4_CLKSOURCE_SYSCLK (uint32_t)((RCC_DCKCFGR2_UART4SEL << 16U) | RCC_DCKCFGR2_UART4SEL_0) /*!< SYSCLK clock used as UART4 clock source */
+#define LL_RCC_UART4_CLKSOURCE_HSI (uint32_t)((RCC_DCKCFGR2_UART4SEL << 16U) | RCC_DCKCFGR2_UART4SEL_1) /*!< HSI clock used as UART4 clock source */
+#define LL_RCC_UART4_CLKSOURCE_LSE (uint32_t)((RCC_DCKCFGR2_UART4SEL << 16U) | RCC_DCKCFGR2_UART4SEL) /*!< LSE clock used as UART4 clock source */
+#define LL_RCC_UART5_CLKSOURCE_PCLK1 (uint32_t)((RCC_DCKCFGR2_UART5SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as UART5 clock source */
+#define LL_RCC_UART5_CLKSOURCE_SYSCLK (uint32_t)((RCC_DCKCFGR2_UART5SEL << 16U) | RCC_DCKCFGR2_UART5SEL_0) /*!< SYSCLK clock used as UART5 clock source */
+#define LL_RCC_UART5_CLKSOURCE_HSI (uint32_t)((RCC_DCKCFGR2_UART5SEL << 16U) | RCC_DCKCFGR2_UART5SEL_1) /*!< HSI clock used as UART5 clock source */
+#define LL_RCC_UART5_CLKSOURCE_LSE (uint32_t)((RCC_DCKCFGR2_UART5SEL << 16U) | RCC_DCKCFGR2_UART5SEL) /*!< LSE clock used as UART5 clock source */
+#define LL_RCC_UART7_CLKSOURCE_PCLK1 (uint32_t)((RCC_DCKCFGR2_UART7SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as UART7 clock source */
+#define LL_RCC_UART7_CLKSOURCE_SYSCLK (uint32_t)((RCC_DCKCFGR2_UART7SEL << 16U) | RCC_DCKCFGR2_UART7SEL_0) /*!< SYSCLK clock used as UART7 clock source */
+#define LL_RCC_UART7_CLKSOURCE_HSI (uint32_t)((RCC_DCKCFGR2_UART7SEL << 16U) | RCC_DCKCFGR2_UART7SEL_1) /*!< HSI clock used as UART7 clock source */
+#define LL_RCC_UART7_CLKSOURCE_LSE (uint32_t)((RCC_DCKCFGR2_UART7SEL << 16U) | RCC_DCKCFGR2_UART7SEL) /*!< LSE clock used as UART7 clock source */
+#define LL_RCC_UART8_CLKSOURCE_PCLK1 (uint32_t)((RCC_DCKCFGR2_UART8SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as UART8 clock source */
+#define LL_RCC_UART8_CLKSOURCE_SYSCLK (uint32_t)((RCC_DCKCFGR2_UART8SEL << 16U) | RCC_DCKCFGR2_UART8SEL_0) /*!< SYSCLK clock used as UART8 clock source */
+#define LL_RCC_UART8_CLKSOURCE_HSI (uint32_t)((RCC_DCKCFGR2_UART8SEL << 16U) | RCC_DCKCFGR2_UART8SEL_1) /*!< HSI clock used as UART8 clock source */
+#define LL_RCC_UART8_CLKSOURCE_LSE (uint32_t)((RCC_DCKCFGR2_UART8SEL << 16U) | RCC_DCKCFGR2_UART8SEL) /*!< LSE clock used as UART8 clock source */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_I2Cx_CLKSOURCE Peripheral I2C clock source selection
+ * @{
+ */
+#define LL_RCC_I2C1_CLKSOURCE_PCLK1 (uint32_t)(RCC_DCKCFGR2_I2C1SEL|0x00000000U) /*!< PCLK1 clock used as I2C1 clock source */
+#define LL_RCC_I2C1_CLKSOURCE_SYSCLK (uint32_t)(RCC_DCKCFGR2_I2C1SEL|(RCC_DCKCFGR2_I2C1SEL_0 >> 16U)) /*!< SYSCLK clock used as I2C1 clock source */
+#define LL_RCC_I2C1_CLKSOURCE_HSI (uint32_t)(RCC_DCKCFGR2_I2C1SEL|(RCC_DCKCFGR2_I2C1SEL_1 >> 16U)) /*!< HSI clock used as I2C1 clock source */
+#define LL_RCC_I2C2_CLKSOURCE_PCLK1 (uint32_t)(RCC_DCKCFGR2_I2C2SEL|0x00000000U) /*!< PCLK1 clock used as I2C2 clock source */
+#define LL_RCC_I2C2_CLKSOURCE_SYSCLK (uint32_t)(RCC_DCKCFGR2_I2C2SEL|(RCC_DCKCFGR2_I2C2SEL_0 >> 16U)) /*!< SYSCLK clock used as I2C2 clock source */
+#define LL_RCC_I2C2_CLKSOURCE_HSI (uint32_t)(RCC_DCKCFGR2_I2C2SEL|(RCC_DCKCFGR2_I2C2SEL_1 >> 16U)) /*!< HSI clock used as I2C2 clock source */
+#define LL_RCC_I2C3_CLKSOURCE_PCLK1 (uint32_t)(RCC_DCKCFGR2_I2C3SEL|0x00000000U) /*!< PCLK1 clock used as I2C3 clock source */
+#define LL_RCC_I2C3_CLKSOURCE_SYSCLK (uint32_t)(RCC_DCKCFGR2_I2C3SEL|(RCC_DCKCFGR2_I2C3SEL_0 >> 16U)) /*!< SYSCLK clock used as I2C3 clock source */
+#define LL_RCC_I2C3_CLKSOURCE_HSI (uint32_t)(RCC_DCKCFGR2_I2C3SEL|(RCC_DCKCFGR2_I2C3SEL_1 >> 16U)) /*!< HSI clock used as I2C3 clock source */
+#if defined(I2C4)
+#define LL_RCC_I2C4_CLKSOURCE_PCLK1 (uint32_t)(RCC_DCKCFGR2_I2C4SEL|0x00000000U) /*!< PCLK1 clock used as I2C4 clock source */
+#define LL_RCC_I2C4_CLKSOURCE_SYSCLK (uint32_t)(RCC_DCKCFGR2_I2C4SEL|(RCC_DCKCFGR2_I2C4SEL_0 >> 16U)) /*!< SYSCLK clock used as I2C4 clock source */
+#define LL_RCC_I2C4_CLKSOURCE_HSI (uint32_t)(RCC_DCKCFGR2_I2C4SEL|(RCC_DCKCFGR2_I2C4SEL_1 >> 16U)) /*!< HSI clock used as I2C4 clock source */
+#endif /* I2C4 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_LPTIM1_CLKSOURCE Peripheral LPTIM clock source selection
+ * @{
+ */
+#define LL_RCC_LPTIM1_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 clock used as LPTIM1 clock */
+#define LL_RCC_LPTIM1_CLKSOURCE_LSI RCC_DCKCFGR2_LPTIM1SEL_0 /*!< LSI oscillator clock used as LPTIM1 clock */
+#define LL_RCC_LPTIM1_CLKSOURCE_HSI RCC_DCKCFGR2_LPTIM1SEL_1 /*!< HSI oscillator clock used as LPTIM1 clock */
+#define LL_RCC_LPTIM1_CLKSOURCE_LSE (uint32_t)(RCC_DCKCFGR2_LPTIM1SEL_1 | RCC_DCKCFGR2_LPTIM1SEL_0) /*!< LSE oscillator clock used as LPTIM1 clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_SAIx_CLKSOURCE Peripheral SAI clock source selection
+ * @{
+ */
+#define LL_RCC_SAI1_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR1_SAI1SEL | 0x00000000U) /*!< PLLSAI clock used as SAI1 clock source */
+#define LL_RCC_SAI1_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR1_SAI1SEL | (RCC_DCKCFGR1_SAI1SEL_0 >> 16U)) /*!< PLLI2S clock used as SAI1 clock source */
+#define LL_RCC_SAI1_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR1_SAI1SEL | (RCC_DCKCFGR1_SAI1SEL_1 >> 16U)) /*!< External pin clock used as SAI1 clock source */
+#if defined(RCC_SAI1SEL_PLLSRC_SUPPORT)
+#define LL_RCC_SAI1_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR1_SAI1SEL | (RCC_DCKCFGR1_SAI1SEL >> 16U)) /*!< Main source clock used as SAI1 clock source */
+#endif /* RCC_SAI1SEL_PLLSRC_SUPPORT */
+#define LL_RCC_SAI2_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR1_SAI2SEL | 0x00000000U) /*!< PLLSAI clock used as SAI2 clock source */
+#define LL_RCC_SAI2_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR1_SAI2SEL | (RCC_DCKCFGR1_SAI2SEL_0 >> 16U)) /*!< PLLI2S clock used as SAI2 clock source */
+#define LL_RCC_SAI2_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR1_SAI2SEL | (RCC_DCKCFGR1_SAI2SEL_1 >> 16U)) /*!< External pin clock used as SAI2 clock source */
+#if defined(RCC_SAI2SEL_PLLSRC_SUPPORT)
+#define LL_RCC_SAI2_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR1_SAI2SEL | (RCC_DCKCFGR1_SAI2SEL >> 16U)) /*!< Main source clock used as SAI2 clock source */
+#endif /* RCC_SAI2SEL_PLLSRC_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_SDMMCx_CLKSOURCE Peripheral SDMMC clock source selection
+ * @{
+ */
+#define LL_RCC_SDMMC1_CLKSOURCE_PLL48CLK (uint32_t)(RCC_DCKCFGR2_SDMMC1SEL | 0x00000000U) /*!< PLL 48M domain clock used as SDMMC1 clock */
+#define LL_RCC_SDMMC1_CLKSOURCE_SYSCLK (uint32_t)(RCC_DCKCFGR2_SDMMC1SEL | (RCC_DCKCFGR2_SDMMC1SEL >> 16U)) /*!< System clock clock used as SDMMC1 clock */
+#if defined(SDMMC2)
+#define LL_RCC_SDMMC2_CLKSOURCE_PLL48CLK (uint32_t)(RCC_DCKCFGR2_SDMMC2SEL | 0x00000000U) /*!< PLL 48M domain clock used as SDMMC2 clock */
+#define LL_RCC_SDMMC2_CLKSOURCE_SYSCLK (uint32_t)(RCC_DCKCFGR2_SDMMC2SEL | (RCC_DCKCFGR2_SDMMC2SEL >> 16U)) /*!< System clock clock used as SDMMC2 clock */
+#endif /* SDMMC2 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_RNG_CLKSOURCE Peripheral RNG clock source selection
+ * @{
+ */
+#define LL_RCC_RNG_CLKSOURCE_PLL 0x00000000U /*!< PLL clock used as RNG clock source */
+#define LL_RCC_RNG_CLKSOURCE_PLLSAI RCC_DCKCFGR2_CK48MSEL /*!< PLLSAI clock used as RNG clock source */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_USB_CLKSOURCE Peripheral USB clock source selection
+ * @{
+ */
+#define LL_RCC_USB_CLKSOURCE_PLL 0x00000000U /*!< PLL clock used as USB clock source */
+#define LL_RCC_USB_CLKSOURCE_PLLSAI RCC_DCKCFGR2_CK48MSEL /*!< PLLSAI1 clock used as USB clock source */
+/**
+ * @}
+ */
+
+#if defined(DSI)
+/** @defgroup RCC_LL_EC_DSI_CLKSOURCE Peripheral DSI clock source selection
+ * @{
+ */
+#define LL_RCC_DSI_CLKSOURCE_PHY 0x00000000U /*!< DSI-PHY clock used as DSI byte lane clock source */
+#define LL_RCC_DSI_CLKSOURCE_PLL RCC_DCKCFGR2_DSISEL /*!< PLL clock used as DSI byte lane clock source */
+/**
+ * @}
+ */
+#endif /* DSI */
+
+#if defined(CEC)
+/** @defgroup RCC_LL_EC_CEC_CLKSOURCE Peripheral CEC clock source selection
+ * @{
+ */
+#define LL_RCC_CEC_CLKSOURCE_LSE 0x00000000U /*!< LSE oscillator clock used as CEC clock */
+#define LL_RCC_CEC_CLKSOURCE_HSI_DIV488 RCC_DCKCFGR2_CECSEL /*!< HSI oscillator clock divided by 488 used as CEC clock */
+/**
+ * @}
+ */
+#endif /* CEC */
+
+/** @defgroup RCC_LL_EC_I2S1_CLKSOURCE Peripheral I2S clock source selection
+ * @{
+ */
+#define LL_RCC_I2S1_CLKSOURCE_PLLI2S 0x00000000U /*!< I2S oscillator clock used as I2S1 clock */
+#define LL_RCC_I2S1_CLKSOURCE_PIN RCC_CFGR_I2SSRC /*!< External pin clock used as I2S1 clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_CK48M_CLKSOURCE Peripheral 48Mhz domain clock source selection
+ * @{
+ */
+#define LL_RCC_CK48M_CLKSOURCE_PLL 0x00000000U /*!< PLL oscillator clock used as 48Mhz domain clock */
+#define LL_RCC_CK48M_CLKSOURCE_PLLSAI RCC_DCKCFGR2_CK48MSEL /*!< PLLSAI oscillator clock used as 48Mhz domain clock */
+/**
+ * @}
+ */
+
+#if defined(DFSDM1_Channel0)
+/** @defgroup RCC_LL_EC_DFSDM1_AUDIO_CLKSOURCE Peripheral DFSDM Audio clock source selection
+ * @{
+ */
+#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI1 0x00000000U /*!< SAI1 clock used as DFSDM1 Audio clock */
+#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI2 RCC_DCKCFGR1_ADFSDM1SEL /*!< SAI2 clock used as DFSDM1 Audio clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_DFSDM1_CLKSOURCE Peripheral DFSDM clock source selection
+ * @{
+ */
+#define LL_RCC_DFSDM1_CLKSOURCE_PCLK2 0x00000000U /*!< PCLK2 clock used as DFSDM1 clock */
+#define LL_RCC_DFSDM1_CLKSOURCE_SYSCLK RCC_DCKCFGR1_DFSDM1SEL /*!< System clock used as DFSDM1 clock */
+/**
+ * @}
+ */
+#endif /* DFSDM1_Channel0 */
+
+/** @defgroup RCC_LL_EC_USARTx Peripheral USART get clock source
+ * @{
+ */
+#define LL_RCC_USART1_CLKSOURCE RCC_DCKCFGR2_USART1SEL /*!< USART1 Clock source selection */
+#define LL_RCC_USART2_CLKSOURCE RCC_DCKCFGR2_USART2SEL /*!< USART2 Clock source selection */
+#define LL_RCC_USART3_CLKSOURCE RCC_DCKCFGR2_USART3SEL /*!< USART3 Clock source selection */
+#define LL_RCC_USART6_CLKSOURCE RCC_DCKCFGR2_USART6SEL /*!< USART6 Clock source selection */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_UARTx Peripheral UART get clock source
+ * @{
+ */
+#define LL_RCC_UART4_CLKSOURCE RCC_DCKCFGR2_UART4SEL /*!< UART4 Clock source selection */
+#define LL_RCC_UART5_CLKSOURCE RCC_DCKCFGR2_UART5SEL /*!< UART5 Clock source selection */
+#define LL_RCC_UART7_CLKSOURCE RCC_DCKCFGR2_UART7SEL /*!< UART7 Clock source selection */
+#define LL_RCC_UART8_CLKSOURCE RCC_DCKCFGR2_UART8SEL /*!< UART8 Clock source selection */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_I2Cx Peripheral I2C get clock source
+ * @{
+ */
+#define LL_RCC_I2C1_CLKSOURCE RCC_DCKCFGR2_I2C1SEL /*!< I2C1 Clock source selection */
+#define LL_RCC_I2C2_CLKSOURCE RCC_DCKCFGR2_I2C2SEL /*!< I2C2 Clock source selection */
+#define LL_RCC_I2C3_CLKSOURCE RCC_DCKCFGR2_I2C3SEL /*!< I2C3 Clock source selection */
+#if defined(I2C4)
+#define LL_RCC_I2C4_CLKSOURCE RCC_DCKCFGR2_I2C4SEL /*!< I2C4 Clock source selection */
+#endif /* I2C4 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_LPTIM1 Peripheral LPTIM get clock source
+ * @{
+ */
+#define LL_RCC_LPTIM1_CLKSOURCE RCC_DCKCFGR2_LPTIM1SEL /*!< LPTIM1 Clock source selection */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_SAIx Peripheral SAI get clock source
+ * @{
+ */
+#define LL_RCC_SAI1_CLKSOURCE RCC_DCKCFGR1_SAI1SEL /*!< SAI1 Clock source selection */
+#define LL_RCC_SAI2_CLKSOURCE RCC_DCKCFGR1_SAI2SEL /*!< SAI2 Clock source selection */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_SDMMCx Peripheral SDMMC get clock source
+ * @{
+ */
+#define LL_RCC_SDMMC1_CLKSOURCE RCC_DCKCFGR2_SDMMC1SEL /*!< SDMMC1 Clock source selection */
+#if defined(SDMMC2)
+#define LL_RCC_SDMMC2_CLKSOURCE RCC_DCKCFGR2_SDMMC2SEL /*!< SDMMC2 Clock source selection */
+#endif /* SDMMC2 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_CK48M Peripheral CK48M get clock source
+ * @{
+ */
+#define LL_RCC_CK48M_CLKSOURCE RCC_DCKCFGR2_CK48MSEL /*!< CK48M Domain clock source selection */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_RNG Peripheral RNG get clock source
+ * @{
+ */
+#define LL_RCC_RNG_CLKSOURCE RCC_DCKCFGR2_CK48MSEL /*!< RNG Clock source selection */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_USB Peripheral USB get clock source
+ * @{
+ */
+#define LL_RCC_USB_CLKSOURCE RCC_DCKCFGR2_CK48MSEL /*!< USB Clock source selection */
+/**
+ * @}
+ */
+
+#if defined(CEC)
+/** @defgroup RCC_LL_EC_CEC Peripheral CEC get clock source
+ * @{
+ */
+#define LL_RCC_CEC_CLKSOURCE RCC_DCKCFGR2_CECSEL /*!< CEC Clock source selection */
+/**
+ * @}
+ */
+#endif /* CEC */
+
+/** @defgroup RCC_LL_EC_I2S1 Peripheral I2S get clock source
+ * @{
+ */
+#define LL_RCC_I2S1_CLKSOURCE RCC_CFGR_I2SSRC /*!< I2S Clock source selection */
+/**
+ * @}
+ */
+#if defined(DFSDM1_Channel0)
+/** @defgroup RCC_LL_EC_DFSDM_AUDIO Peripheral DFSDM Audio get clock source
+ * @{
+ */
+#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE RCC_DCKCFGR1_ADFSDM1SEL /*!< DFSDM Audio Clock source selection */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_DFSDM Peripheral DFSDM get clock source
+ * @{
+ */
+#define LL_RCC_DFSDM1_CLKSOURCE RCC_DCKCFGR1_DFSDM1SEL /*!< DFSDM Clock source selection */
+/**
+ * @}
+ */
+#endif /* DFSDM1_Channel0 */
+
+#if defined(DSI)
+/** @defgroup RCC_LL_EC_DSI Peripheral DSI get clock source
+ * @{
+ */
+#define LL_RCC_DSI_CLKSOURCE RCC_DCKCFGR2_DSISEL /*!< DSI Clock source selection */
+/**
+ * @}
+ */
+#endif /* DSI */
+
+#if defined(LTDC)
+/** @defgroup RCC_LL_EC_LTDC Peripheral LTDC get clock source
+ * @{
+ */
+#define LL_RCC_LTDC_CLKSOURCE RCC_DCKCFGR1_PLLSAIDIVR /*!< LTDC Clock source selection */
+/**
+ * @}
+ */
+#endif /* LTDC */
+
+#if defined(SPDIFRX)
+/** @defgroup RCC_LL_EC_SPDIFRX Peripheral SPDIFRX get clock source
+ * @{
+ */
+#define LL_RCC_SPDIFRX1_CLKSOURCE RCC_PLLI2SCFGR_PLLI2SP /*!< SPDIFRX Clock source selection */
+/**
+ * @}
+ */
+#endif /* SPDIFRX */
+
+/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection
+ * @{
+ */
+#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */
+#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */
+#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */
+#define LL_RCC_RTC_CLKSOURCE_HSE RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by HSE prescaler used as RTC clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_TIM_CLKPRESCALER Timers clocks prescalers selection
+ * @{
+ */
+#define LL_RCC_TIM_PRESCALER_TWICE 0x00000000U /*!< Timers clock to twice PCLK */
+#define LL_RCC_TIM_PRESCALER_FOUR_TIMES RCC_DCKCFGR1_TIMPRE /*!< Timers clock to four time PCLK */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PLLSOURCE PLL, PLLI2S and PLLSAI entry clock source
+ * @{
+ */
+#define LL_RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI /*!< HSI16 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PLLM_DIV PLL, PLLI2S and PLLSAI division factor
+ * @{
+ */
+#define LL_RCC_PLLM_DIV_2 (RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 2 */
+#define LL_RCC_PLLM_DIV_3 (RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 3 */
+#define LL_RCC_PLLM_DIV_4 (RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 4 */
+#define LL_RCC_PLLM_DIV_5 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 5 */
+#define LL_RCC_PLLM_DIV_6 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 6 */
+#define LL_RCC_PLLM_DIV_7 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 7 */
+#define LL_RCC_PLLM_DIV_8 (RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 8 */
+#define LL_RCC_PLLM_DIV_9 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 9 */
+#define LL_RCC_PLLM_DIV_10 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 10 */
+#define LL_RCC_PLLM_DIV_11 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 11 */
+#define LL_RCC_PLLM_DIV_12 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 12 */
+#define LL_RCC_PLLM_DIV_13 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 13 */
+#define LL_RCC_PLLM_DIV_14 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 14 */
+#define LL_RCC_PLLM_DIV_15 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 15 */
+#define LL_RCC_PLLM_DIV_16 (RCC_PLLCFGR_PLLM_4) /*!< PLL, PLLI2S and PLLSAI division factor by 16 */
+#define LL_RCC_PLLM_DIV_17 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 17 */
+#define LL_RCC_PLLM_DIV_18 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 18 */
+#define LL_RCC_PLLM_DIV_19 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 19 */
+#define LL_RCC_PLLM_DIV_20 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 20 */
+#define LL_RCC_PLLM_DIV_21 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 21 */
+#define LL_RCC_PLLM_DIV_22 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 22 */
+#define LL_RCC_PLLM_DIV_23 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 23 */
+#define LL_RCC_PLLM_DIV_24 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 24 */
+#define LL_RCC_PLLM_DIV_25 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 25 */
+#define LL_RCC_PLLM_DIV_26 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 26 */
+#define LL_RCC_PLLM_DIV_27 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 27 */
+#define LL_RCC_PLLM_DIV_28 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 28 */
+#define LL_RCC_PLLM_DIV_29 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 29 */
+#define LL_RCC_PLLM_DIV_30 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 30 */
+#define LL_RCC_PLLM_DIV_31 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 31 */
+#define LL_RCC_PLLM_DIV_32 (RCC_PLLCFGR_PLLM_5) /*!< PLL, PLLI2S and PLLSAI division factor by 32 */
+#define LL_RCC_PLLM_DIV_33 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 33 */
+#define LL_RCC_PLLM_DIV_34 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 34 */
+#define LL_RCC_PLLM_DIV_35 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 35 */
+#define LL_RCC_PLLM_DIV_36 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 36 */
+#define LL_RCC_PLLM_DIV_37 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 37 */
+#define LL_RCC_PLLM_DIV_38 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 38 */
+#define LL_RCC_PLLM_DIV_39 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 39 */
+#define LL_RCC_PLLM_DIV_40 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 40 */
+#define LL_RCC_PLLM_DIV_41 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 41 */
+#define LL_RCC_PLLM_DIV_42 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 42 */
+#define LL_RCC_PLLM_DIV_43 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 43 */
+#define LL_RCC_PLLM_DIV_44 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 44 */
+#define LL_RCC_PLLM_DIV_45 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 45 */
+#define LL_RCC_PLLM_DIV_46 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 46 */
+#define LL_RCC_PLLM_DIV_47 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 47 */
+#define LL_RCC_PLLM_DIV_48 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4) /*!< PLL, PLLI2S and PLLSAI division factor by 48 */
+#define LL_RCC_PLLM_DIV_49 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 49 */
+#define LL_RCC_PLLM_DIV_50 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 50 */
+#define LL_RCC_PLLM_DIV_51 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 51 */
+#define LL_RCC_PLLM_DIV_52 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 52 */
+#define LL_RCC_PLLM_DIV_53 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 53 */
+#define LL_RCC_PLLM_DIV_54 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 54 */
+#define LL_RCC_PLLM_DIV_55 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 55 */
+#define LL_RCC_PLLM_DIV_56 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 56 */
+#define LL_RCC_PLLM_DIV_57 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 57 */
+#define LL_RCC_PLLM_DIV_58 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 58 */
+#define LL_RCC_PLLM_DIV_59 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 59 */
+#define LL_RCC_PLLM_DIV_60 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 60 */
+#define LL_RCC_PLLM_DIV_61 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 61 */
+#define LL_RCC_PLLM_DIV_62 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 62 */
+#define LL_RCC_PLLM_DIV_63 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 63 */
+/**
+ * @}
+ */
+
+#if defined(RCC_PLLCFGR_PLLR)
+/** @defgroup RCC_LL_EC_PLLR_DIV PLL division factor (PLLR)
+ * @{
+ */
+#define LL_RCC_PLLR_DIV_2 (RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 2 */
+#define LL_RCC_PLLR_DIV_3 (RCC_PLLCFGR_PLLR_1|RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 3 */
+#define LL_RCC_PLLR_DIV_4 (RCC_PLLCFGR_PLLR_2) /*!< Main PLL division factor for PLLCLK (system clock) by 4 */
+#define LL_RCC_PLLR_DIV_5 (RCC_PLLCFGR_PLLR_2|RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 5 */
+#define LL_RCC_PLLR_DIV_6 (RCC_PLLCFGR_PLLR_2|RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 6 */
+#define LL_RCC_PLLR_DIV_7 (RCC_PLLCFGR_PLLR) /*!< Main PLL division factor for PLLCLK (system clock) by 7 */
+/**
+ * @}
+ */
+#endif /* RCC_PLLCFGR_PLLR */
+
+/** @defgroup RCC_LL_EC_PLLP_DIV PLL division factor (PLLP)
+ * @{
+ */
+#define LL_RCC_PLLP_DIV_2 0x00000000U /*!< Main PLL division factor for PLLP output by 2 */
+#define LL_RCC_PLLP_DIV_4 RCC_PLLCFGR_PLLP_0 /*!< Main PLL division factor for PLLP output by 4 */
+#define LL_RCC_PLLP_DIV_6 RCC_PLLCFGR_PLLP_1 /*!< Main PLL division factor for PLLP output by 6 */
+#define LL_RCC_PLLP_DIV_8 (RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< Main PLL division factor for PLLP output by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PLLQ_DIV PLL division factor (PLLQ)
+ * @{
+ */
+#define LL_RCC_PLLQ_DIV_2 RCC_PLLCFGR_PLLQ_1 /*!< Main PLL division factor for PLLQ output by 2 */
+#define LL_RCC_PLLQ_DIV_3 (RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 3 */
+#define LL_RCC_PLLQ_DIV_4 RCC_PLLCFGR_PLLQ_2 /*!< Main PLL division factor for PLLQ output by 4 */
+#define LL_RCC_PLLQ_DIV_5 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 5 */
+#define LL_RCC_PLLQ_DIV_6 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 6 */
+#define LL_RCC_PLLQ_DIV_7 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 7 */
+#define LL_RCC_PLLQ_DIV_8 RCC_PLLCFGR_PLLQ_3 /*!< Main PLL division factor for PLLQ output by 8 */
+#define LL_RCC_PLLQ_DIV_9 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 9 */
+#define LL_RCC_PLLQ_DIV_10 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 10 */
+#define LL_RCC_PLLQ_DIV_11 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 11 */
+#define LL_RCC_PLLQ_DIV_12 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2) /*!< Main PLL division factor for PLLQ output by 12 */
+#define LL_RCC_PLLQ_DIV_13 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 13 */
+#define LL_RCC_PLLQ_DIV_14 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 14 */
+#define LL_RCC_PLLQ_DIV_15 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 15 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PLL_SPRE_SEL PLL Spread Spectrum Selection
+ * @{
+ */
+#define LL_RCC_SPREAD_SELECT_CENTER 0x00000000U /*!< PLL center spread spectrum selection */
+#define LL_RCC_SPREAD_SELECT_DOWN RCC_SSCGR_SPREADSEL /*!< PLL down spread spectrum selection */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PLLI2SQ PLLI2SQ division factor (PLLI2SQ)
+ * @{
+ */
+#define LL_RCC_PLLI2SQ_DIV_2 RCC_PLLI2SCFGR_PLLI2SQ_1 /*!< PLLI2S division factor for PLLI2SQ output by 2 */
+#define LL_RCC_PLLI2SQ_DIV_3 (RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 3 */
+#define LL_RCC_PLLI2SQ_DIV_4 RCC_PLLI2SCFGR_PLLI2SQ_2 /*!< PLLI2S division factor for PLLI2SQ output by 4 */
+#define LL_RCC_PLLI2SQ_DIV_5 (RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 5 */
+#define LL_RCC_PLLI2SQ_DIV_6 (RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1) /*!< PLLI2S division factor for PLLI2SQ output by 6 */
+#define LL_RCC_PLLI2SQ_DIV_7 (RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 7 */
+#define LL_RCC_PLLI2SQ_DIV_8 RCC_PLLI2SCFGR_PLLI2SQ_3 /*!< PLLI2S division factor for PLLI2SQ output by 8 */
+#define LL_RCC_PLLI2SQ_DIV_9 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 9 */
+#define LL_RCC_PLLI2SQ_DIV_10 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_1) /*!< PLLI2S division factor for PLLI2SQ output by 10 */
+#define LL_RCC_PLLI2SQ_DIV_11 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 11 */
+#define LL_RCC_PLLI2SQ_DIV_12 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2) /*!< PLLI2S division factor for PLLI2SQ output by 12 */
+#define LL_RCC_PLLI2SQ_DIV_13 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 13 */
+#define LL_RCC_PLLI2SQ_DIV_14 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1) /*!< PLLI2S division factor for PLLI2SQ output by 14 */
+#define LL_RCC_PLLI2SQ_DIV_15 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 15 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PLLI2SDIVQ PLLI2SDIVQ division factor (PLLI2SDIVQ)
+ * @{
+ */
+#define LL_RCC_PLLI2SDIVQ_DIV_1 0x00000000U /*!< PLLI2S division factor for PLLI2SDIVQ output by 1 */
+#define LL_RCC_PLLI2SDIVQ_DIV_2 RCC_DCKCFGR1_PLLI2SDIVQ_0 /*!< PLLI2S division factor for PLLI2SDIVQ output by 2 */
+#define LL_RCC_PLLI2SDIVQ_DIV_3 RCC_DCKCFGR1_PLLI2SDIVQ_1 /*!< PLLI2S division factor for PLLI2SDIVQ output by 3 */
+#define LL_RCC_PLLI2SDIVQ_DIV_4 (RCC_DCKCFGR1_PLLI2SDIVQ_1 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 4 */
+#define LL_RCC_PLLI2SDIVQ_DIV_5 RCC_DCKCFGR1_PLLI2SDIVQ_2 /*!< PLLI2S division factor for PLLI2SDIVQ output by 5 */
+#define LL_RCC_PLLI2SDIVQ_DIV_6 (RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 6 */
+#define LL_RCC_PLLI2SDIVQ_DIV_7 (RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 7 */
+#define LL_RCC_PLLI2SDIVQ_DIV_8 (RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_1 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 8 */
+#define LL_RCC_PLLI2SDIVQ_DIV_9 RCC_DCKCFGR1_PLLI2SDIVQ_3 /*!< PLLI2S division factor for PLLI2SDIVQ output by 9 */
+#define LL_RCC_PLLI2SDIVQ_DIV_10 (RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 10 */
+#define LL_RCC_PLLI2SDIVQ_DIV_11 (RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 11 */
+#define LL_RCC_PLLI2SDIVQ_DIV_12 (RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_1 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 12 */
+#define LL_RCC_PLLI2SDIVQ_DIV_13 (RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_2) /*!< PLLI2S division factor for PLLI2SDIVQ output by 13 */
+#define LL_RCC_PLLI2SDIVQ_DIV_14 (RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 14 */
+#define LL_RCC_PLLI2SDIVQ_DIV_15 (RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 15 */
+#define LL_RCC_PLLI2SDIVQ_DIV_16 (RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_1 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 16 */
+#define LL_RCC_PLLI2SDIVQ_DIV_17 RCC_DCKCFGR1_PLLI2SDIVQ_4 /*!< PLLI2S division factor for PLLI2SDIVQ output by 17 */
+#define LL_RCC_PLLI2SDIVQ_DIV_18 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 18 */
+#define LL_RCC_PLLI2SDIVQ_DIV_19 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 19 */
+#define LL_RCC_PLLI2SDIVQ_DIV_20 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_1 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 20 */
+#define LL_RCC_PLLI2SDIVQ_DIV_21 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_2) /*!< PLLI2S division factor for PLLI2SDIVQ output by 21 */
+#define LL_RCC_PLLI2SDIVQ_DIV_22 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 22 */
+#define LL_RCC_PLLI2SDIVQ_DIV_23 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 23 */
+#define LL_RCC_PLLI2SDIVQ_DIV_24 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_1 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 24 */
+#define LL_RCC_PLLI2SDIVQ_DIV_25 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_3) /*!< PLLI2S division factor for PLLI2SDIVQ output by 25 */
+#define LL_RCC_PLLI2SDIVQ_DIV_26 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 26 */
+#define LL_RCC_PLLI2SDIVQ_DIV_27 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 27 */
+#define LL_RCC_PLLI2SDIVQ_DIV_28 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_1 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 28 */
+#define LL_RCC_PLLI2SDIVQ_DIV_29 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_2) /*!< PLLI2S division factor for PLLI2SDIVQ output by 29 */
+#define LL_RCC_PLLI2SDIVQ_DIV_30 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 30 */
+#define LL_RCC_PLLI2SDIVQ_DIV_31 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 31 */
+#define LL_RCC_PLLI2SDIVQ_DIV_32 (RCC_DCKCFGR1_PLLI2SDIVQ_4 | RCC_DCKCFGR1_PLLI2SDIVQ_3 | RCC_DCKCFGR1_PLLI2SDIVQ_2 | RCC_DCKCFGR1_PLLI2SDIVQ_1 | RCC_DCKCFGR1_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 32 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PLLI2SR PLLI2SR division factor (PLLI2SR)
+ * @{
+ */
+#define LL_RCC_PLLI2SR_DIV_2 RCC_PLLI2SCFGR_PLLI2SR_1 /*!< PLLI2S division factor for PLLI2SR output by 2 */
+#define LL_RCC_PLLI2SR_DIV_3 (RCC_PLLI2SCFGR_PLLI2SR_1 | RCC_PLLI2SCFGR_PLLI2SR_0) /*!< PLLI2S division factor for PLLI2SR output by 3 */
+#define LL_RCC_PLLI2SR_DIV_4 RCC_PLLI2SCFGR_PLLI2SR_2 /*!< PLLI2S division factor for PLLI2SR output by 4 */
+#define LL_RCC_PLLI2SR_DIV_5 (RCC_PLLI2SCFGR_PLLI2SR_2 | RCC_PLLI2SCFGR_PLLI2SR_0) /*!< PLLI2S division factor for PLLI2SR output by 5 */
+#define LL_RCC_PLLI2SR_DIV_6 (RCC_PLLI2SCFGR_PLLI2SR_2 | RCC_PLLI2SCFGR_PLLI2SR_1) /*!< PLLI2S division factor for PLLI2SR output by 6 */
+#define LL_RCC_PLLI2SR_DIV_7 (RCC_PLLI2SCFGR_PLLI2SR_2 | RCC_PLLI2SCFGR_PLLI2SR_1 | RCC_PLLI2SCFGR_PLLI2SR_0) /*!< PLLI2S division factor for PLLI2SR output by 7 */
+/**
+ * @}
+ */
+
+#if defined(RCC_PLLI2SCFGR_PLLI2SP)
+/** @defgroup RCC_LL_EC_PLLI2SP PLLI2SP division factor (PLLI2SP)
+ * @{
+ */
+#define LL_RCC_PLLI2SP_DIV_2 0x00000000U /*!< PLLI2S division factor for PLLI2SP output by 2 */
+#define LL_RCC_PLLI2SP_DIV_4 RCC_PLLI2SCFGR_PLLI2SP_0 /*!< PLLI2S division factor for PLLI2SP output by 4 */
+#define LL_RCC_PLLI2SP_DIV_6 RCC_PLLI2SCFGR_PLLI2SP_1 /*!< PLLI2S division factor for PLLI2SP output by 6 */
+#define LL_RCC_PLLI2SP_DIV_8 (RCC_PLLI2SCFGR_PLLI2SP_1 | RCC_PLLI2SCFGR_PLLI2SP_0) /*!< PLLI2S division factor for PLLI2SP output by 8 */
+/**
+ * @}
+ */
+#endif /* RCC_PLLI2SCFGR_PLLI2SP */
+
+/** @defgroup RCC_LL_EC_PLLSAIQ PLLSAIQ division factor (PLLSAIQ)
+ * @{
+ */
+#define LL_RCC_PLLSAIQ_DIV_2 RCC_PLLSAICFGR_PLLSAIQ_1 /*!< PLLSAI division factor for PLLSAIQ output by 2 */
+#define LL_RCC_PLLSAIQ_DIV_3 (RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 3 */
+#define LL_RCC_PLLSAIQ_DIV_4 RCC_PLLSAICFGR_PLLSAIQ_2 /*!< PLLSAI division factor for PLLSAIQ output by 4 */
+#define LL_RCC_PLLSAIQ_DIV_5 (RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 5 */
+#define LL_RCC_PLLSAIQ_DIV_6 (RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1) /*!< PLLSAI division factor for PLLSAIQ output by 6 */
+#define LL_RCC_PLLSAIQ_DIV_7 (RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 7 */
+#define LL_RCC_PLLSAIQ_DIV_8 RCC_PLLSAICFGR_PLLSAIQ_3 /*!< PLLSAI division factor for PLLSAIQ output by 8 */
+#define LL_RCC_PLLSAIQ_DIV_9 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 9 */
+#define LL_RCC_PLLSAIQ_DIV_10 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_1) /*!< PLLSAI division factor for PLLSAIQ output by 10 */
+#define LL_RCC_PLLSAIQ_DIV_11 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 11 */
+#define LL_RCC_PLLSAIQ_DIV_12 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2) /*!< PLLSAI division factor for PLLSAIQ output by 12 */
+#define LL_RCC_PLLSAIQ_DIV_13 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 13 */
+#define LL_RCC_PLLSAIQ_DIV_14 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1) /*!< PLLSAI division factor for PLLSAIQ output by 14 */
+#define LL_RCC_PLLSAIQ_DIV_15 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 15 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PLLSAIDIVQ PLLSAIDIVQ division factor (PLLSAIDIVQ)
+ * @{
+ */
+#define LL_RCC_PLLSAIDIVQ_DIV_1 0x00000000U /*!< PLLSAI division factor for PLLSAIDIVQ output by 1 */
+#define LL_RCC_PLLSAIDIVQ_DIV_2 RCC_DCKCFGR1_PLLSAIDIVQ_0 /*!< PLLSAI division factor for PLLSAIDIVQ output by 2 */
+#define LL_RCC_PLLSAIDIVQ_DIV_3 RCC_DCKCFGR1_PLLSAIDIVQ_1 /*!< PLLSAI division factor for PLLSAIDIVQ output by 3 */
+#define LL_RCC_PLLSAIDIVQ_DIV_4 (RCC_DCKCFGR1_PLLSAIDIVQ_1 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 4 */
+#define LL_RCC_PLLSAIDIVQ_DIV_5 RCC_DCKCFGR1_PLLSAIDIVQ_2 /*!< PLLSAI division factor for PLLSAIDIVQ output by 5 */
+#define LL_RCC_PLLSAIDIVQ_DIV_6 (RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 6 */
+#define LL_RCC_PLLSAIDIVQ_DIV_7 (RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 7 */
+#define LL_RCC_PLLSAIDIVQ_DIV_8 (RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_1 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 8 */
+#define LL_RCC_PLLSAIDIVQ_DIV_9 RCC_DCKCFGR1_PLLSAIDIVQ_3 /*!< PLLSAI division factor for PLLSAIDIVQ output by 9 */
+#define LL_RCC_PLLSAIDIVQ_DIV_10 (RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 10 */
+#define LL_RCC_PLLSAIDIVQ_DIV_11 (RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 11 */
+#define LL_RCC_PLLSAIDIVQ_DIV_12 (RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_1 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 12 */
+#define LL_RCC_PLLSAIDIVQ_DIV_13 (RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_2) /*!< PLLSAI division factor for PLLSAIDIVQ output by 13 */
+#define LL_RCC_PLLSAIDIVQ_DIV_14 (RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 14 */
+#define LL_RCC_PLLSAIDIVQ_DIV_15 (RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 15 */
+#define LL_RCC_PLLSAIDIVQ_DIV_16 (RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_1 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 16 */
+#define LL_RCC_PLLSAIDIVQ_DIV_17 RCC_DCKCFGR1_PLLSAIDIVQ_4 /*!< PLLSAI division factor for PLLSAIDIVQ output by 17 */
+#define LL_RCC_PLLSAIDIVQ_DIV_18 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 18 */
+#define LL_RCC_PLLSAIDIVQ_DIV_19 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 19 */
+#define LL_RCC_PLLSAIDIVQ_DIV_20 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_1 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 20 */
+#define LL_RCC_PLLSAIDIVQ_DIV_21 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_2) /*!< PLLSAI division factor for PLLSAIDIVQ output by 21 */
+#define LL_RCC_PLLSAIDIVQ_DIV_22 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 22 */
+#define LL_RCC_PLLSAIDIVQ_DIV_23 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 23 */
+#define LL_RCC_PLLSAIDIVQ_DIV_24 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_1 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 24 */
+#define LL_RCC_PLLSAIDIVQ_DIV_25 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_3) /*!< PLLSAI division factor for PLLSAIDIVQ output by 25 */
+#define LL_RCC_PLLSAIDIVQ_DIV_26 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 26 */
+#define LL_RCC_PLLSAIDIVQ_DIV_27 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 27 */
+#define LL_RCC_PLLSAIDIVQ_DIV_28 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_1 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 28 */
+#define LL_RCC_PLLSAIDIVQ_DIV_29 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_2) /*!< PLLSAI division factor for PLLSAIDIVQ output by 29 */
+#define LL_RCC_PLLSAIDIVQ_DIV_30 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 30 */
+#define LL_RCC_PLLSAIDIVQ_DIV_31 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 31 */
+#define LL_RCC_PLLSAIDIVQ_DIV_32 (RCC_DCKCFGR1_PLLSAIDIVQ_4 | RCC_DCKCFGR1_PLLSAIDIVQ_3 | RCC_DCKCFGR1_PLLSAIDIVQ_2 | RCC_DCKCFGR1_PLLSAIDIVQ_1 | RCC_DCKCFGR1_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 32 */
+/**
+ * @}
+ */
+
+#if defined(RCC_PLLSAICFGR_PLLSAIR)
+/** @defgroup RCC_LL_EC_PLLSAIR PLLSAIR division factor (PLLSAIR)
+ * @{
+ */
+#define LL_RCC_PLLSAIR_DIV_2 RCC_PLLSAICFGR_PLLSAIR_1 /*!< PLLSAI division factor for PLLSAIR output by 2 */
+#define LL_RCC_PLLSAIR_DIV_3 (RCC_PLLSAICFGR_PLLSAIR_1 | RCC_PLLSAICFGR_PLLSAIR_0) /*!< PLLSAI division factor for PLLSAIR output by 3 */
+#define LL_RCC_PLLSAIR_DIV_4 RCC_PLLSAICFGR_PLLSAIR_2 /*!< PLLSAI division factor for PLLSAIR output by 4 */
+#define LL_RCC_PLLSAIR_DIV_5 (RCC_PLLSAICFGR_PLLSAIR_2 | RCC_PLLSAICFGR_PLLSAIR_0) /*!< PLLSAI division factor for PLLSAIR output by 5 */
+#define LL_RCC_PLLSAIR_DIV_6 (RCC_PLLSAICFGR_PLLSAIR_2 | RCC_PLLSAICFGR_PLLSAIR_1) /*!< PLLSAI division factor for PLLSAIR output by 6 */
+#define LL_RCC_PLLSAIR_DIV_7 (RCC_PLLSAICFGR_PLLSAIR_2 | RCC_PLLSAICFGR_PLLSAIR_1 | RCC_PLLSAICFGR_PLLSAIR_0) /*!< PLLSAI division factor for PLLSAIR output by 7 */
+/**
+ * @}
+ */
+#endif /* RCC_PLLSAICFGR_PLLSAIR */
+
+#if defined(RCC_DCKCFGR1_PLLSAIDIVR)
+/** @defgroup RCC_LL_EC_PLLSAIDIVR PLLSAIDIVR division factor (PLLSAIDIVR)
+ * @{
+ */
+#define LL_RCC_PLLSAIDIVR_DIV_2 0x00000000U /*!< PLLSAI division factor for PLLSAIDIVR output by 2 */
+#define LL_RCC_PLLSAIDIVR_DIV_4 RCC_DCKCFGR1_PLLSAIDIVR_0 /*!< PLLSAI division factor for PLLSAIDIVR output by 4 */
+#define LL_RCC_PLLSAIDIVR_DIV_8 RCC_DCKCFGR1_PLLSAIDIVR_1 /*!< PLLSAI division factor for PLLSAIDIVR output by 8 */
+#define LL_RCC_PLLSAIDIVR_DIV_16 (RCC_DCKCFGR1_PLLSAIDIVR_1 | RCC_DCKCFGR1_PLLSAIDIVR_0) /*!< PLLSAI division factor for PLLSAIDIVR output by 16 */
+/**
+ * @}
+ */
+#endif /* RCC_DCKCFGR1_PLLSAIDIVR */
+
+/** @defgroup RCC_LL_EC_PLLSAIP PLLSAIP division factor (PLLSAIP)
+ * @{
+ */
+#define LL_RCC_PLLSAIP_DIV_2 0x00000000U /*!< PLLSAI division factor for PLLSAIP output by 2 */
+#define LL_RCC_PLLSAIP_DIV_4 RCC_PLLSAICFGR_PLLSAIP_0 /*!< PLLSAI division factor for PLLSAIP output by 4 */
+#define LL_RCC_PLLSAIP_DIV_6 RCC_PLLSAICFGR_PLLSAIP_1 /*!< PLLSAI division factor for PLLSAIP output by 6 */
+#define LL_RCC_PLLSAIP_DIV_8 (RCC_PLLSAICFGR_PLLSAIP_1 | RCC_PLLSAICFGR_PLLSAIP_0) /*!< PLLSAI division factor for PLLSAIP output by 8 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros
+ * @{
+ */
+
+/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in RCC register
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in RCC register
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies
+ * @{
+ */
+
+/**
+ * @brief Helper macro to calculate the PLLCLK frequency on system domain
+ * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9
+ * @arg @ref LL_RCC_PLLM_DIV_10
+ * @arg @ref LL_RCC_PLLM_DIV_11
+ * @arg @ref LL_RCC_PLLM_DIV_12
+ * @arg @ref LL_RCC_PLLM_DIV_13
+ * @arg @ref LL_RCC_PLLM_DIV_14
+ * @arg @ref LL_RCC_PLLM_DIV_15
+ * @arg @ref LL_RCC_PLLM_DIV_16
+ * @arg @ref LL_RCC_PLLM_DIV_17
+ * @arg @ref LL_RCC_PLLM_DIV_18
+ * @arg @ref LL_RCC_PLLM_DIV_19
+ * @arg @ref LL_RCC_PLLM_DIV_20
+ * @arg @ref LL_RCC_PLLM_DIV_21
+ * @arg @ref LL_RCC_PLLM_DIV_22
+ * @arg @ref LL_RCC_PLLM_DIV_23
+ * @arg @ref LL_RCC_PLLM_DIV_24
+ * @arg @ref LL_RCC_PLLM_DIV_25
+ * @arg @ref LL_RCC_PLLM_DIV_26
+ * @arg @ref LL_RCC_PLLM_DIV_27
+ * @arg @ref LL_RCC_PLLM_DIV_28
+ * @arg @ref LL_RCC_PLLM_DIV_29
+ * @arg @ref LL_RCC_PLLM_DIV_30
+ * @arg @ref LL_RCC_PLLM_DIV_31
+ * @arg @ref LL_RCC_PLLM_DIV_32
+ * @arg @ref LL_RCC_PLLM_DIV_33
+ * @arg @ref LL_RCC_PLLM_DIV_34
+ * @arg @ref LL_RCC_PLLM_DIV_35
+ * @arg @ref LL_RCC_PLLM_DIV_36
+ * @arg @ref LL_RCC_PLLM_DIV_37
+ * @arg @ref LL_RCC_PLLM_DIV_38
+ * @arg @ref LL_RCC_PLLM_DIV_39
+ * @arg @ref LL_RCC_PLLM_DIV_40
+ * @arg @ref LL_RCC_PLLM_DIV_41
+ * @arg @ref LL_RCC_PLLM_DIV_42
+ * @arg @ref LL_RCC_PLLM_DIV_43
+ * @arg @ref LL_RCC_PLLM_DIV_44
+ * @arg @ref LL_RCC_PLLM_DIV_45
+ * @arg @ref LL_RCC_PLLM_DIV_46
+ * @arg @ref LL_RCC_PLLM_DIV_47
+ * @arg @ref LL_RCC_PLLM_DIV_48
+ * @arg @ref LL_RCC_PLLM_DIV_49
+ * @arg @ref LL_RCC_PLLM_DIV_50
+ * @arg @ref LL_RCC_PLLM_DIV_51
+ * @arg @ref LL_RCC_PLLM_DIV_52
+ * @arg @ref LL_RCC_PLLM_DIV_53
+ * @arg @ref LL_RCC_PLLM_DIV_54
+ * @arg @ref LL_RCC_PLLM_DIV_55
+ * @arg @ref LL_RCC_PLLM_DIV_56
+ * @arg @ref LL_RCC_PLLM_DIV_57
+ * @arg @ref LL_RCC_PLLM_DIV_58
+ * @arg @ref LL_RCC_PLLM_DIV_59
+ * @arg @ref LL_RCC_PLLM_DIV_60
+ * @arg @ref LL_RCC_PLLM_DIV_61
+ * @arg @ref LL_RCC_PLLM_DIV_62
+ * @arg @ref LL_RCC_PLLM_DIV_63
+ * @param __PLLN__ Between 50 and 432
+ * @param __PLLP__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLP_DIV_2
+ * @arg @ref LL_RCC_PLLP_DIV_4
+ * @arg @ref LL_RCC_PLLP_DIV_6
+ * @arg @ref LL_RCC_PLLP_DIV_8
+ * @retval PLL clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \
+ ((((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos ) + 1U) * 2U))
+
+/**
+ * @brief Helper macro to calculate the PLLCLK frequency used on 48M domain
+ * @note ex: @ref __LL_RCC_CALC_PLLCLK_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9
+ * @arg @ref LL_RCC_PLLM_DIV_10
+ * @arg @ref LL_RCC_PLLM_DIV_11
+ * @arg @ref LL_RCC_PLLM_DIV_12
+ * @arg @ref LL_RCC_PLLM_DIV_13
+ * @arg @ref LL_RCC_PLLM_DIV_14
+ * @arg @ref LL_RCC_PLLM_DIV_15
+ * @arg @ref LL_RCC_PLLM_DIV_16
+ * @arg @ref LL_RCC_PLLM_DIV_17
+ * @arg @ref LL_RCC_PLLM_DIV_18
+ * @arg @ref LL_RCC_PLLM_DIV_19
+ * @arg @ref LL_RCC_PLLM_DIV_20
+ * @arg @ref LL_RCC_PLLM_DIV_21
+ * @arg @ref LL_RCC_PLLM_DIV_22
+ * @arg @ref LL_RCC_PLLM_DIV_23
+ * @arg @ref LL_RCC_PLLM_DIV_24
+ * @arg @ref LL_RCC_PLLM_DIV_25
+ * @arg @ref LL_RCC_PLLM_DIV_26
+ * @arg @ref LL_RCC_PLLM_DIV_27
+ * @arg @ref LL_RCC_PLLM_DIV_28
+ * @arg @ref LL_RCC_PLLM_DIV_29
+ * @arg @ref LL_RCC_PLLM_DIV_30
+ * @arg @ref LL_RCC_PLLM_DIV_31
+ * @arg @ref LL_RCC_PLLM_DIV_32
+ * @arg @ref LL_RCC_PLLM_DIV_33
+ * @arg @ref LL_RCC_PLLM_DIV_34
+ * @arg @ref LL_RCC_PLLM_DIV_35
+ * @arg @ref LL_RCC_PLLM_DIV_36
+ * @arg @ref LL_RCC_PLLM_DIV_37
+ * @arg @ref LL_RCC_PLLM_DIV_38
+ * @arg @ref LL_RCC_PLLM_DIV_39
+ * @arg @ref LL_RCC_PLLM_DIV_40
+ * @arg @ref LL_RCC_PLLM_DIV_41
+ * @arg @ref LL_RCC_PLLM_DIV_42
+ * @arg @ref LL_RCC_PLLM_DIV_43
+ * @arg @ref LL_RCC_PLLM_DIV_44
+ * @arg @ref LL_RCC_PLLM_DIV_45
+ * @arg @ref LL_RCC_PLLM_DIV_46
+ * @arg @ref LL_RCC_PLLM_DIV_47
+ * @arg @ref LL_RCC_PLLM_DIV_48
+ * @arg @ref LL_RCC_PLLM_DIV_49
+ * @arg @ref LL_RCC_PLLM_DIV_50
+ * @arg @ref LL_RCC_PLLM_DIV_51
+ * @arg @ref LL_RCC_PLLM_DIV_52
+ * @arg @ref LL_RCC_PLLM_DIV_53
+ * @arg @ref LL_RCC_PLLM_DIV_54
+ * @arg @ref LL_RCC_PLLM_DIV_55
+ * @arg @ref LL_RCC_PLLM_DIV_56
+ * @arg @ref LL_RCC_PLLM_DIV_57
+ * @arg @ref LL_RCC_PLLM_DIV_58
+ * @arg @ref LL_RCC_PLLM_DIV_59
+ * @arg @ref LL_RCC_PLLM_DIV_60
+ * @arg @ref LL_RCC_PLLM_DIV_61
+ * @arg @ref LL_RCC_PLLM_DIV_62
+ * @arg @ref LL_RCC_PLLM_DIV_63
+ * @param __PLLN__ Between 50 and 432
+ * @param __PLLQ__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLQ_DIV_2
+ * @arg @ref LL_RCC_PLLQ_DIV_3
+ * @arg @ref LL_RCC_PLLQ_DIV_4
+ * @arg @ref LL_RCC_PLLQ_DIV_5
+ * @arg @ref LL_RCC_PLLQ_DIV_6
+ * @arg @ref LL_RCC_PLLQ_DIV_7
+ * @arg @ref LL_RCC_PLLQ_DIV_8
+ * @arg @ref LL_RCC_PLLQ_DIV_9
+ * @arg @ref LL_RCC_PLLQ_DIV_10
+ * @arg @ref LL_RCC_PLLQ_DIV_11
+ * @arg @ref LL_RCC_PLLQ_DIV_12
+ * @arg @ref LL_RCC_PLLQ_DIV_13
+ * @arg @ref LL_RCC_PLLQ_DIV_14
+ * @arg @ref LL_RCC_PLLQ_DIV_15
+ * @retval PLL clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLCLK_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \
+ ((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos ))
+
+#if defined(DSI)
+/**
+ * @brief Helper macro to calculate the PLLCLK frequency used on DSI
+ * @note ex: @ref __LL_RCC_CALC_PLLCLK_DSI_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9
+ * @arg @ref LL_RCC_PLLM_DIV_10
+ * @arg @ref LL_RCC_PLLM_DIV_11
+ * @arg @ref LL_RCC_PLLM_DIV_12
+ * @arg @ref LL_RCC_PLLM_DIV_13
+ * @arg @ref LL_RCC_PLLM_DIV_14
+ * @arg @ref LL_RCC_PLLM_DIV_15
+ * @arg @ref LL_RCC_PLLM_DIV_16
+ * @arg @ref LL_RCC_PLLM_DIV_17
+ * @arg @ref LL_RCC_PLLM_DIV_18
+ * @arg @ref LL_RCC_PLLM_DIV_19
+ * @arg @ref LL_RCC_PLLM_DIV_20
+ * @arg @ref LL_RCC_PLLM_DIV_21
+ * @arg @ref LL_RCC_PLLM_DIV_22
+ * @arg @ref LL_RCC_PLLM_DIV_23
+ * @arg @ref LL_RCC_PLLM_DIV_24
+ * @arg @ref LL_RCC_PLLM_DIV_25
+ * @arg @ref LL_RCC_PLLM_DIV_26
+ * @arg @ref LL_RCC_PLLM_DIV_27
+ * @arg @ref LL_RCC_PLLM_DIV_28
+ * @arg @ref LL_RCC_PLLM_DIV_29
+ * @arg @ref LL_RCC_PLLM_DIV_30
+ * @arg @ref LL_RCC_PLLM_DIV_31
+ * @arg @ref LL_RCC_PLLM_DIV_32
+ * @arg @ref LL_RCC_PLLM_DIV_33
+ * @arg @ref LL_RCC_PLLM_DIV_34
+ * @arg @ref LL_RCC_PLLM_DIV_35
+ * @arg @ref LL_RCC_PLLM_DIV_36
+ * @arg @ref LL_RCC_PLLM_DIV_37
+ * @arg @ref LL_RCC_PLLM_DIV_38
+ * @arg @ref LL_RCC_PLLM_DIV_39
+ * @arg @ref LL_RCC_PLLM_DIV_40
+ * @arg @ref LL_RCC_PLLM_DIV_41
+ * @arg @ref LL_RCC_PLLM_DIV_42
+ * @arg @ref LL_RCC_PLLM_DIV_43
+ * @arg @ref LL_RCC_PLLM_DIV_44
+ * @arg @ref LL_RCC_PLLM_DIV_45
+ * @arg @ref LL_RCC_PLLM_DIV_46
+ * @arg @ref LL_RCC_PLLM_DIV_47
+ * @arg @ref LL_RCC_PLLM_DIV_48
+ * @arg @ref LL_RCC_PLLM_DIV_49
+ * @arg @ref LL_RCC_PLLM_DIV_50
+ * @arg @ref LL_RCC_PLLM_DIV_51
+ * @arg @ref LL_RCC_PLLM_DIV_52
+ * @arg @ref LL_RCC_PLLM_DIV_53
+ * @arg @ref LL_RCC_PLLM_DIV_54
+ * @arg @ref LL_RCC_PLLM_DIV_55
+ * @arg @ref LL_RCC_PLLM_DIV_56
+ * @arg @ref LL_RCC_PLLM_DIV_57
+ * @arg @ref LL_RCC_PLLM_DIV_58
+ * @arg @ref LL_RCC_PLLM_DIV_59
+ * @arg @ref LL_RCC_PLLM_DIV_60
+ * @arg @ref LL_RCC_PLLM_DIV_61
+ * @arg @ref LL_RCC_PLLM_DIV_62
+ * @arg @ref LL_RCC_PLLM_DIV_63
+ * @param __PLLN__ Between 50 and 432
+ * @param __PLLR__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLR_DIV_2
+ * @arg @ref LL_RCC_PLLR_DIV_3
+ * @arg @ref LL_RCC_PLLR_DIV_4
+ * @arg @ref LL_RCC_PLLR_DIV_5
+ * @arg @ref LL_RCC_PLLR_DIV_6
+ * @arg @ref LL_RCC_PLLR_DIV_7
+ * @retval PLL clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLCLK_DSI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \
+ ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos ))
+#endif /* DSI */
+
+/**
+ * @brief Helper macro to calculate the PLLSAI frequency used for SAI1 and SAI2 domains
+ * @note ex: @ref __LL_RCC_CALC_PLLSAI_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLLSAI_GetN (), @ref LL_RCC_PLLSAI_GetQ (), @ref LL_RCC_PLLSAI_GetDIVQ ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9
+ * @arg @ref LL_RCC_PLLM_DIV_10
+ * @arg @ref LL_RCC_PLLM_DIV_11
+ * @arg @ref LL_RCC_PLLM_DIV_12
+ * @arg @ref LL_RCC_PLLM_DIV_13
+ * @arg @ref LL_RCC_PLLM_DIV_14
+ * @arg @ref LL_RCC_PLLM_DIV_15
+ * @arg @ref LL_RCC_PLLM_DIV_16
+ * @arg @ref LL_RCC_PLLM_DIV_17
+ * @arg @ref LL_RCC_PLLM_DIV_18
+ * @arg @ref LL_RCC_PLLM_DIV_19
+ * @arg @ref LL_RCC_PLLM_DIV_20
+ * @arg @ref LL_RCC_PLLM_DIV_21
+ * @arg @ref LL_RCC_PLLM_DIV_22
+ * @arg @ref LL_RCC_PLLM_DIV_23
+ * @arg @ref LL_RCC_PLLM_DIV_24
+ * @arg @ref LL_RCC_PLLM_DIV_25
+ * @arg @ref LL_RCC_PLLM_DIV_26
+ * @arg @ref LL_RCC_PLLM_DIV_27
+ * @arg @ref LL_RCC_PLLM_DIV_28
+ * @arg @ref LL_RCC_PLLM_DIV_29
+ * @arg @ref LL_RCC_PLLM_DIV_30
+ * @arg @ref LL_RCC_PLLM_DIV_31
+ * @arg @ref LL_RCC_PLLM_DIV_32
+ * @arg @ref LL_RCC_PLLM_DIV_33
+ * @arg @ref LL_RCC_PLLM_DIV_34
+ * @arg @ref LL_RCC_PLLM_DIV_35
+ * @arg @ref LL_RCC_PLLM_DIV_36
+ * @arg @ref LL_RCC_PLLM_DIV_37
+ * @arg @ref LL_RCC_PLLM_DIV_38
+ * @arg @ref LL_RCC_PLLM_DIV_39
+ * @arg @ref LL_RCC_PLLM_DIV_40
+ * @arg @ref LL_RCC_PLLM_DIV_41
+ * @arg @ref LL_RCC_PLLM_DIV_42
+ * @arg @ref LL_RCC_PLLM_DIV_43
+ * @arg @ref LL_RCC_PLLM_DIV_44
+ * @arg @ref LL_RCC_PLLM_DIV_45
+ * @arg @ref LL_RCC_PLLM_DIV_46
+ * @arg @ref LL_RCC_PLLM_DIV_47
+ * @arg @ref LL_RCC_PLLM_DIV_48
+ * @arg @ref LL_RCC_PLLM_DIV_49
+ * @arg @ref LL_RCC_PLLM_DIV_50
+ * @arg @ref LL_RCC_PLLM_DIV_51
+ * @arg @ref LL_RCC_PLLM_DIV_52
+ * @arg @ref LL_RCC_PLLM_DIV_53
+ * @arg @ref LL_RCC_PLLM_DIV_54
+ * @arg @ref LL_RCC_PLLM_DIV_55
+ * @arg @ref LL_RCC_PLLM_DIV_56
+ * @arg @ref LL_RCC_PLLM_DIV_57
+ * @arg @ref LL_RCC_PLLM_DIV_58
+ * @arg @ref LL_RCC_PLLM_DIV_59
+ * @arg @ref LL_RCC_PLLM_DIV_60
+ * @arg @ref LL_RCC_PLLM_DIV_61
+ * @arg @ref LL_RCC_PLLM_DIV_62
+ * @arg @ref LL_RCC_PLLM_DIV_63
+ * @param __PLLSAIN__ Between 50 and 432
+ * @param __PLLSAIQ__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_2
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_3
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_4
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_5
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_6
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_7
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_8
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_9
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_10
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_11
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_12
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_13
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_14
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_15
+ * @param __PLLSAIDIVQ__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_1
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_2
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_3
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_4
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_5
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_6
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_7
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_8
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_9
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_10
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_11
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_12
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_13
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_14
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_15
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_16
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_17
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_18
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_19
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_20
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_21
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_22
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_23
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_24
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_25
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_26
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_27
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_28
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_29
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_30
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_31
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_32
+ * @retval PLLSAI clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLSAI_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAIN__, __PLLSAIQ__, __PLLSAIDIVQ__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLSAIN__) / \
+ (((__PLLSAIQ__) >> RCC_PLLSAICFGR_PLLSAIQ_Pos) * (((__PLLSAIDIVQ__) >> RCC_DCKCFGR1_PLLSAIDIVQ_Pos) + 1U)))
+
+/**
+ * @brief Helper macro to calculate the PLLSAI frequency used on 48Mhz domain
+ * @note ex: @ref __LL_RCC_CALC_PLLSAI_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLLSAI_GetN (), @ref LL_RCC_PLLSAI_GetP ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9
+ * @arg @ref LL_RCC_PLLM_DIV_10
+ * @arg @ref LL_RCC_PLLM_DIV_11
+ * @arg @ref LL_RCC_PLLM_DIV_12
+ * @arg @ref LL_RCC_PLLM_DIV_13
+ * @arg @ref LL_RCC_PLLM_DIV_14
+ * @arg @ref LL_RCC_PLLM_DIV_15
+ * @arg @ref LL_RCC_PLLM_DIV_16
+ * @arg @ref LL_RCC_PLLM_DIV_17
+ * @arg @ref LL_RCC_PLLM_DIV_18
+ * @arg @ref LL_RCC_PLLM_DIV_19
+ * @arg @ref LL_RCC_PLLM_DIV_20
+ * @arg @ref LL_RCC_PLLM_DIV_21
+ * @arg @ref LL_RCC_PLLM_DIV_22
+ * @arg @ref LL_RCC_PLLM_DIV_23
+ * @arg @ref LL_RCC_PLLM_DIV_24
+ * @arg @ref LL_RCC_PLLM_DIV_25
+ * @arg @ref LL_RCC_PLLM_DIV_26
+ * @arg @ref LL_RCC_PLLM_DIV_27
+ * @arg @ref LL_RCC_PLLM_DIV_28
+ * @arg @ref LL_RCC_PLLM_DIV_29
+ * @arg @ref LL_RCC_PLLM_DIV_30
+ * @arg @ref LL_RCC_PLLM_DIV_31
+ * @arg @ref LL_RCC_PLLM_DIV_32
+ * @arg @ref LL_RCC_PLLM_DIV_33
+ * @arg @ref LL_RCC_PLLM_DIV_34
+ * @arg @ref LL_RCC_PLLM_DIV_35
+ * @arg @ref LL_RCC_PLLM_DIV_36
+ * @arg @ref LL_RCC_PLLM_DIV_37
+ * @arg @ref LL_RCC_PLLM_DIV_38
+ * @arg @ref LL_RCC_PLLM_DIV_39
+ * @arg @ref LL_RCC_PLLM_DIV_40
+ * @arg @ref LL_RCC_PLLM_DIV_41
+ * @arg @ref LL_RCC_PLLM_DIV_42
+ * @arg @ref LL_RCC_PLLM_DIV_43
+ * @arg @ref LL_RCC_PLLM_DIV_44
+ * @arg @ref LL_RCC_PLLM_DIV_45
+ * @arg @ref LL_RCC_PLLM_DIV_46
+ * @arg @ref LL_RCC_PLLM_DIV_47
+ * @arg @ref LL_RCC_PLLM_DIV_48
+ * @arg @ref LL_RCC_PLLM_DIV_49
+ * @arg @ref LL_RCC_PLLM_DIV_50
+ * @arg @ref LL_RCC_PLLM_DIV_51
+ * @arg @ref LL_RCC_PLLM_DIV_52
+ * @arg @ref LL_RCC_PLLM_DIV_53
+ * @arg @ref LL_RCC_PLLM_DIV_54
+ * @arg @ref LL_RCC_PLLM_DIV_55
+ * @arg @ref LL_RCC_PLLM_DIV_56
+ * @arg @ref LL_RCC_PLLM_DIV_57
+ * @arg @ref LL_RCC_PLLM_DIV_58
+ * @arg @ref LL_RCC_PLLM_DIV_59
+ * @arg @ref LL_RCC_PLLM_DIV_60
+ * @arg @ref LL_RCC_PLLM_DIV_61
+ * @arg @ref LL_RCC_PLLM_DIV_62
+ * @arg @ref LL_RCC_PLLM_DIV_63
+ * @param __PLLSAIN__ Between 50 and 432
+ * @param __PLLSAIP__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAIP_DIV_2
+ * @arg @ref LL_RCC_PLLSAIP_DIV_4
+ * @arg @ref LL_RCC_PLLSAIP_DIV_6
+ * @arg @ref LL_RCC_PLLSAIP_DIV_8
+ * @retval PLLSAI clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLSAI_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAIN__, __PLLSAIP__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLSAIN__) / \
+ ((((__PLLSAIP__) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U ) * 2U))
+
+#if defined(LTDC)
+/**
+ * @brief Helper macro to calculate the PLLSAI frequency used for LTDC domain
+ * @note ex: @ref __LL_RCC_CALC_PLLSAI_LTDC_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLLSAI_GetN (), @ref LL_RCC_PLLSAI_GetR (), @ref LL_RCC_PLLSAI_GetDIVR ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9
+ * @arg @ref LL_RCC_PLLM_DIV_10
+ * @arg @ref LL_RCC_PLLM_DIV_11
+ * @arg @ref LL_RCC_PLLM_DIV_12
+ * @arg @ref LL_RCC_PLLM_DIV_13
+ * @arg @ref LL_RCC_PLLM_DIV_14
+ * @arg @ref LL_RCC_PLLM_DIV_15
+ * @arg @ref LL_RCC_PLLM_DIV_16
+ * @arg @ref LL_RCC_PLLM_DIV_17
+ * @arg @ref LL_RCC_PLLM_DIV_18
+ * @arg @ref LL_RCC_PLLM_DIV_19
+ * @arg @ref LL_RCC_PLLM_DIV_20
+ * @arg @ref LL_RCC_PLLM_DIV_21
+ * @arg @ref LL_RCC_PLLM_DIV_22
+ * @arg @ref LL_RCC_PLLM_DIV_23
+ * @arg @ref LL_RCC_PLLM_DIV_24
+ * @arg @ref LL_RCC_PLLM_DIV_25
+ * @arg @ref LL_RCC_PLLM_DIV_26
+ * @arg @ref LL_RCC_PLLM_DIV_27
+ * @arg @ref LL_RCC_PLLM_DIV_28
+ * @arg @ref LL_RCC_PLLM_DIV_29
+ * @arg @ref LL_RCC_PLLM_DIV_30
+ * @arg @ref LL_RCC_PLLM_DIV_31
+ * @arg @ref LL_RCC_PLLM_DIV_32
+ * @arg @ref LL_RCC_PLLM_DIV_33
+ * @arg @ref LL_RCC_PLLM_DIV_34
+ * @arg @ref LL_RCC_PLLM_DIV_35
+ * @arg @ref LL_RCC_PLLM_DIV_36
+ * @arg @ref LL_RCC_PLLM_DIV_37
+ * @arg @ref LL_RCC_PLLM_DIV_38
+ * @arg @ref LL_RCC_PLLM_DIV_39
+ * @arg @ref LL_RCC_PLLM_DIV_40
+ * @arg @ref LL_RCC_PLLM_DIV_41
+ * @arg @ref LL_RCC_PLLM_DIV_42
+ * @arg @ref LL_RCC_PLLM_DIV_43
+ * @arg @ref LL_RCC_PLLM_DIV_44
+ * @arg @ref LL_RCC_PLLM_DIV_45
+ * @arg @ref LL_RCC_PLLM_DIV_46
+ * @arg @ref LL_RCC_PLLM_DIV_47
+ * @arg @ref LL_RCC_PLLM_DIV_48
+ * @arg @ref LL_RCC_PLLM_DIV_49
+ * @arg @ref LL_RCC_PLLM_DIV_50
+ * @arg @ref LL_RCC_PLLM_DIV_51
+ * @arg @ref LL_RCC_PLLM_DIV_52
+ * @arg @ref LL_RCC_PLLM_DIV_53
+ * @arg @ref LL_RCC_PLLM_DIV_54
+ * @arg @ref LL_RCC_PLLM_DIV_55
+ * @arg @ref LL_RCC_PLLM_DIV_56
+ * @arg @ref LL_RCC_PLLM_DIV_57
+ * @arg @ref LL_RCC_PLLM_DIV_58
+ * @arg @ref LL_RCC_PLLM_DIV_59
+ * @arg @ref LL_RCC_PLLM_DIV_60
+ * @arg @ref LL_RCC_PLLM_DIV_61
+ * @arg @ref LL_RCC_PLLM_DIV_62
+ * @arg @ref LL_RCC_PLLM_DIV_63
+ * @param __PLLSAIN__ Between 50 and 432
+ * @param __PLLSAIR__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAIR_DIV_2
+ * @arg @ref LL_RCC_PLLSAIR_DIV_3
+ * @arg @ref LL_RCC_PLLSAIR_DIV_4
+ * @arg @ref LL_RCC_PLLSAIR_DIV_5
+ * @arg @ref LL_RCC_PLLSAIR_DIV_6
+ * @arg @ref LL_RCC_PLLSAIR_DIV_7
+ * @param __PLLSAIDIVR__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAIDIVR_DIV_2
+ * @arg @ref LL_RCC_PLLSAIDIVR_DIV_4
+ * @arg @ref LL_RCC_PLLSAIDIVR_DIV_8
+ * @arg @ref LL_RCC_PLLSAIDIVR_DIV_16
+ * @retval PLLSAI clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLSAI_LTDC_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAIN__, __PLLSAIR__, __PLLSAIDIVR__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLSAIN__) / \
+ (((__PLLSAIR__) >> RCC_PLLSAICFGR_PLLSAIR_Pos) * (aRCC_PLLSAIDIVRPrescTable[(__PLLSAIDIVR__) >> RCC_DCKCFGR1_PLLSAIDIVR_Pos])))
+#endif /* LTDC */
+
+/**
+ * @brief Helper macro to calculate the PLLI2S frequency used for SAI1 and SAI2 domains
+ * @note ex: @ref __LL_RCC_CALC_PLLI2S_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetQ (), @ref LL_RCC_PLLI2S_GetDIVQ ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9
+ * @arg @ref LL_RCC_PLLM_DIV_10
+ * @arg @ref LL_RCC_PLLM_DIV_11
+ * @arg @ref LL_RCC_PLLM_DIV_12
+ * @arg @ref LL_RCC_PLLM_DIV_13
+ * @arg @ref LL_RCC_PLLM_DIV_14
+ * @arg @ref LL_RCC_PLLM_DIV_15
+ * @arg @ref LL_RCC_PLLM_DIV_16
+ * @arg @ref LL_RCC_PLLM_DIV_17
+ * @arg @ref LL_RCC_PLLM_DIV_18
+ * @arg @ref LL_RCC_PLLM_DIV_19
+ * @arg @ref LL_RCC_PLLM_DIV_20
+ * @arg @ref LL_RCC_PLLM_DIV_21
+ * @arg @ref LL_RCC_PLLM_DIV_22
+ * @arg @ref LL_RCC_PLLM_DIV_23
+ * @arg @ref LL_RCC_PLLM_DIV_24
+ * @arg @ref LL_RCC_PLLM_DIV_25
+ * @arg @ref LL_RCC_PLLM_DIV_26
+ * @arg @ref LL_RCC_PLLM_DIV_27
+ * @arg @ref LL_RCC_PLLM_DIV_28
+ * @arg @ref LL_RCC_PLLM_DIV_29
+ * @arg @ref LL_RCC_PLLM_DIV_30
+ * @arg @ref LL_RCC_PLLM_DIV_31
+ * @arg @ref LL_RCC_PLLM_DIV_32
+ * @arg @ref LL_RCC_PLLM_DIV_33
+ * @arg @ref LL_RCC_PLLM_DIV_34
+ * @arg @ref LL_RCC_PLLM_DIV_35
+ * @arg @ref LL_RCC_PLLM_DIV_36
+ * @arg @ref LL_RCC_PLLM_DIV_37
+ * @arg @ref LL_RCC_PLLM_DIV_38
+ * @arg @ref LL_RCC_PLLM_DIV_39
+ * @arg @ref LL_RCC_PLLM_DIV_40
+ * @arg @ref LL_RCC_PLLM_DIV_41
+ * @arg @ref LL_RCC_PLLM_DIV_42
+ * @arg @ref LL_RCC_PLLM_DIV_43
+ * @arg @ref LL_RCC_PLLM_DIV_44
+ * @arg @ref LL_RCC_PLLM_DIV_45
+ * @arg @ref LL_RCC_PLLM_DIV_46
+ * @arg @ref LL_RCC_PLLM_DIV_47
+ * @arg @ref LL_RCC_PLLM_DIV_48
+ * @arg @ref LL_RCC_PLLM_DIV_49
+ * @arg @ref LL_RCC_PLLM_DIV_50
+ * @arg @ref LL_RCC_PLLM_DIV_51
+ * @arg @ref LL_RCC_PLLM_DIV_52
+ * @arg @ref LL_RCC_PLLM_DIV_53
+ * @arg @ref LL_RCC_PLLM_DIV_54
+ * @arg @ref LL_RCC_PLLM_DIV_55
+ * @arg @ref LL_RCC_PLLM_DIV_56
+ * @arg @ref LL_RCC_PLLM_DIV_57
+ * @arg @ref LL_RCC_PLLM_DIV_58
+ * @arg @ref LL_RCC_PLLM_DIV_59
+ * @arg @ref LL_RCC_PLLM_DIV_60
+ * @arg @ref LL_RCC_PLLM_DIV_61
+ * @arg @ref LL_RCC_PLLM_DIV_62
+ * @arg @ref LL_RCC_PLLM_DIV_63
+ * @param __PLLI2SN__ Between 50 and 432
+ * @param __PLLI2SQ__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_2
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_3
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_4
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_5
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_6
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_7
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_8
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_9
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_10
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_11
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_12
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_13
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_14
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_15
+ * @param __PLLI2SDIVQ__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_1
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_2
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_3
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_4
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_5
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_6
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_7
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_8
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_9
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_10
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_11
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_12
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_13
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_14
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_15
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_16
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_17
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_18
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_19
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_20
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_21
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_22
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_23
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_24
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_25
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_26
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_27
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_28
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_29
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_30
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_31
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_32
+ * @retval PLLI2S clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLI2S_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SQ__, __PLLI2SDIVQ__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \
+ (((__PLLI2SQ__) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos) * (((__PLLI2SDIVQ__) >> RCC_DCKCFGR1_PLLI2SDIVQ_Pos) + 1U)))
+
+#if defined(SPDIFRX)
+/**
+ * @brief Helper macro to calculate the PLLI2S frequency used on SPDIFRX domain
+ * @note ex: @ref __LL_RCC_CALC_PLLI2S_SPDIFRX_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetP ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9
+ * @arg @ref LL_RCC_PLLM_DIV_10
+ * @arg @ref LL_RCC_PLLM_DIV_11
+ * @arg @ref LL_RCC_PLLM_DIV_12
+ * @arg @ref LL_RCC_PLLM_DIV_13
+ * @arg @ref LL_RCC_PLLM_DIV_14
+ * @arg @ref LL_RCC_PLLM_DIV_15
+ * @arg @ref LL_RCC_PLLM_DIV_16
+ * @arg @ref LL_RCC_PLLM_DIV_17
+ * @arg @ref LL_RCC_PLLM_DIV_18
+ * @arg @ref LL_RCC_PLLM_DIV_19
+ * @arg @ref LL_RCC_PLLM_DIV_20
+ * @arg @ref LL_RCC_PLLM_DIV_21
+ * @arg @ref LL_RCC_PLLM_DIV_22
+ * @arg @ref LL_RCC_PLLM_DIV_23
+ * @arg @ref LL_RCC_PLLM_DIV_24
+ * @arg @ref LL_RCC_PLLM_DIV_25
+ * @arg @ref LL_RCC_PLLM_DIV_26
+ * @arg @ref LL_RCC_PLLM_DIV_27
+ * @arg @ref LL_RCC_PLLM_DIV_28
+ * @arg @ref LL_RCC_PLLM_DIV_29
+ * @arg @ref LL_RCC_PLLM_DIV_30
+ * @arg @ref LL_RCC_PLLM_DIV_31
+ * @arg @ref LL_RCC_PLLM_DIV_32
+ * @arg @ref LL_RCC_PLLM_DIV_33
+ * @arg @ref LL_RCC_PLLM_DIV_34
+ * @arg @ref LL_RCC_PLLM_DIV_35
+ * @arg @ref LL_RCC_PLLM_DIV_36
+ * @arg @ref LL_RCC_PLLM_DIV_37
+ * @arg @ref LL_RCC_PLLM_DIV_38
+ * @arg @ref LL_RCC_PLLM_DIV_39
+ * @arg @ref LL_RCC_PLLM_DIV_40
+ * @arg @ref LL_RCC_PLLM_DIV_41
+ * @arg @ref LL_RCC_PLLM_DIV_42
+ * @arg @ref LL_RCC_PLLM_DIV_43
+ * @arg @ref LL_RCC_PLLM_DIV_44
+ * @arg @ref LL_RCC_PLLM_DIV_45
+ * @arg @ref LL_RCC_PLLM_DIV_46
+ * @arg @ref LL_RCC_PLLM_DIV_47
+ * @arg @ref LL_RCC_PLLM_DIV_48
+ * @arg @ref LL_RCC_PLLM_DIV_49
+ * @arg @ref LL_RCC_PLLM_DIV_50
+ * @arg @ref LL_RCC_PLLM_DIV_51
+ * @arg @ref LL_RCC_PLLM_DIV_52
+ * @arg @ref LL_RCC_PLLM_DIV_53
+ * @arg @ref LL_RCC_PLLM_DIV_54
+ * @arg @ref LL_RCC_PLLM_DIV_55
+ * @arg @ref LL_RCC_PLLM_DIV_56
+ * @arg @ref LL_RCC_PLLM_DIV_57
+ * @arg @ref LL_RCC_PLLM_DIV_58
+ * @arg @ref LL_RCC_PLLM_DIV_59
+ * @arg @ref LL_RCC_PLLM_DIV_60
+ * @arg @ref LL_RCC_PLLM_DIV_61
+ * @arg @ref LL_RCC_PLLM_DIV_62
+ * @arg @ref LL_RCC_PLLM_DIV_63
+ * @param __PLLI2SN__ Between 50 and 432
+ * @param __PLLI2SP__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLI2SP_DIV_2
+ * @arg @ref LL_RCC_PLLI2SP_DIV_4
+ * @arg @ref LL_RCC_PLLI2SP_DIV_6
+ * @arg @ref LL_RCC_PLLI2SP_DIV_8
+ * @retval PLLI2S clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLI2S_SPDIFRX_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SP__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \
+ ((((__PLLI2SP__) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) * 2U))
+#endif /* SPDIFRX */
+
+/**
+ * @brief Helper macro to calculate the PLLI2S frequency used for I2S domain
+ * @note ex: @ref __LL_RCC_CALC_PLLI2S_I2S_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetR ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9
+ * @arg @ref LL_RCC_PLLM_DIV_10
+ * @arg @ref LL_RCC_PLLM_DIV_11
+ * @arg @ref LL_RCC_PLLM_DIV_12
+ * @arg @ref LL_RCC_PLLM_DIV_13
+ * @arg @ref LL_RCC_PLLM_DIV_14
+ * @arg @ref LL_RCC_PLLM_DIV_15
+ * @arg @ref LL_RCC_PLLM_DIV_16
+ * @arg @ref LL_RCC_PLLM_DIV_17
+ * @arg @ref LL_RCC_PLLM_DIV_18
+ * @arg @ref LL_RCC_PLLM_DIV_19
+ * @arg @ref LL_RCC_PLLM_DIV_20
+ * @arg @ref LL_RCC_PLLM_DIV_21
+ * @arg @ref LL_RCC_PLLM_DIV_22
+ * @arg @ref LL_RCC_PLLM_DIV_23
+ * @arg @ref LL_RCC_PLLM_DIV_24
+ * @arg @ref LL_RCC_PLLM_DIV_25
+ * @arg @ref LL_RCC_PLLM_DIV_26
+ * @arg @ref LL_RCC_PLLM_DIV_27
+ * @arg @ref LL_RCC_PLLM_DIV_28
+ * @arg @ref LL_RCC_PLLM_DIV_29
+ * @arg @ref LL_RCC_PLLM_DIV_30
+ * @arg @ref LL_RCC_PLLM_DIV_31
+ * @arg @ref LL_RCC_PLLM_DIV_32
+ * @arg @ref LL_RCC_PLLM_DIV_33
+ * @arg @ref LL_RCC_PLLM_DIV_34
+ * @arg @ref LL_RCC_PLLM_DIV_35
+ * @arg @ref LL_RCC_PLLM_DIV_36
+ * @arg @ref LL_RCC_PLLM_DIV_37
+ * @arg @ref LL_RCC_PLLM_DIV_38
+ * @arg @ref LL_RCC_PLLM_DIV_39
+ * @arg @ref LL_RCC_PLLM_DIV_40
+ * @arg @ref LL_RCC_PLLM_DIV_41
+ * @arg @ref LL_RCC_PLLM_DIV_42
+ * @arg @ref LL_RCC_PLLM_DIV_43
+ * @arg @ref LL_RCC_PLLM_DIV_44
+ * @arg @ref LL_RCC_PLLM_DIV_45
+ * @arg @ref LL_RCC_PLLM_DIV_46
+ * @arg @ref LL_RCC_PLLM_DIV_47
+ * @arg @ref LL_RCC_PLLM_DIV_48
+ * @arg @ref LL_RCC_PLLM_DIV_49
+ * @arg @ref LL_RCC_PLLM_DIV_50
+ * @arg @ref LL_RCC_PLLM_DIV_51
+ * @arg @ref LL_RCC_PLLM_DIV_52
+ * @arg @ref LL_RCC_PLLM_DIV_53
+ * @arg @ref LL_RCC_PLLM_DIV_54
+ * @arg @ref LL_RCC_PLLM_DIV_55
+ * @arg @ref LL_RCC_PLLM_DIV_56
+ * @arg @ref LL_RCC_PLLM_DIV_57
+ * @arg @ref LL_RCC_PLLM_DIV_58
+ * @arg @ref LL_RCC_PLLM_DIV_59
+ * @arg @ref LL_RCC_PLLM_DIV_60
+ * @arg @ref LL_RCC_PLLM_DIV_61
+ * @arg @ref LL_RCC_PLLM_DIV_62
+ * @arg @ref LL_RCC_PLLM_DIV_63
+ * @param __PLLI2SN__ Between 50 and 432
+ * @param __PLLI2SR__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLI2SR_DIV_2
+ * @arg @ref LL_RCC_PLLI2SR_DIV_3
+ * @arg @ref LL_RCC_PLLI2SR_DIV_4
+ * @arg @ref LL_RCC_PLLI2SR_DIV_5
+ * @arg @ref LL_RCC_PLLI2SR_DIV_6
+ * @arg @ref LL_RCC_PLLI2SR_DIV_7
+ * @retval PLLI2S clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLI2S_I2S_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SR__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \
+ ((__PLLI2SR__) >> RCC_PLLI2SCFGR_PLLI2SR_Pos))
+
+/**
+ * @brief Helper macro to calculate the HCLK frequency
+ * @param __SYSCLKFREQ__ SYSCLK frequency (based on HSE/HSI/PLLCLK)
+ * @param __AHBPRESCALER__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SYSCLK_DIV_1
+ * @arg @ref LL_RCC_SYSCLK_DIV_2
+ * @arg @ref LL_RCC_SYSCLK_DIV_4
+ * @arg @ref LL_RCC_SYSCLK_DIV_8
+ * @arg @ref LL_RCC_SYSCLK_DIV_16
+ * @arg @ref LL_RCC_SYSCLK_DIV_64
+ * @arg @ref LL_RCC_SYSCLK_DIV_128
+ * @arg @ref LL_RCC_SYSCLK_DIV_256
+ * @arg @ref LL_RCC_SYSCLK_DIV_512
+ * @retval HCLK clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __AHBPRESCALER__) ((__SYSCLKFREQ__) >> AHBPrescTable[((__AHBPRESCALER__) & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos])
+
+/**
+ * @brief Helper macro to calculate the PCLK1 frequency (ABP1)
+ * @param __HCLKFREQ__ HCLK frequency
+ * @param __APB1PRESCALER__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_APB1_DIV_1
+ * @arg @ref LL_RCC_APB1_DIV_2
+ * @arg @ref LL_RCC_APB1_DIV_4
+ * @arg @ref LL_RCC_APB1_DIV_8
+ * @arg @ref LL_RCC_APB1_DIV_16
+ * @retval PCLK1 clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB1PRESCALER__) >> RCC_CFGR_PPRE1_Pos])
+
+/**
+ * @brief Helper macro to calculate the PCLK2 frequency (ABP2)
+ * @param __HCLKFREQ__ HCLK frequency
+ * @param __APB2PRESCALER__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_APB2_DIV_1
+ * @arg @ref LL_RCC_APB2_DIV_2
+ * @arg @ref LL_RCC_APB2_DIV_4
+ * @arg @ref LL_RCC_APB2_DIV_8
+ * @arg @ref LL_RCC_APB2_DIV_16
+ * @retval PCLK2 clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PCLK2_FREQ(__HCLKFREQ__, __APB2PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB2PRESCALER__) >> RCC_CFGR_PPRE2_Pos])
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions
+ * @{
+ */
+
+/** @defgroup RCC_LL_EF_HSE HSE
+ * @{
+ */
+
+/**
+ * @brief Enable the Clock Security System.
+ * @rmtoll CR CSSON LL_RCC_HSE_EnableCSS
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_CSSON);
+}
+
+/**
+ * @brief Enable HSE external oscillator (HSE Bypass)
+ * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_HSEBYP);
+}
+
+/**
+ * @brief Disable HSE external oscillator (HSE Bypass)
+ * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);
+}
+
+/**
+ * @brief Enable HSE crystal oscillator (HSE ON)
+ * @rmtoll CR HSEON LL_RCC_HSE_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_Enable(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_HSEON);
+}
+
+/**
+ * @brief Disable HSE crystal oscillator (HSE ON)
+ * @rmtoll CR HSEON LL_RCC_HSE_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_Disable(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON);
+}
+
+/**
+ * @brief Check if HSE oscillator Ready
+ * @rmtoll CR HSERDY LL_RCC_HSE_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void)
+{
+ return (READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_HSI HSI
+ * @{
+ */
+
+/**
+ * @brief Enable HSI oscillator
+ * @rmtoll CR HSION LL_RCC_HSI_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI_Enable(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_HSION);
+}
+
+/**
+ * @brief Disable HSI oscillator
+ * @rmtoll CR HSION LL_RCC_HSI_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI_Disable(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_HSION);
+}
+
+/**
+ * @brief Check if HSI clock is ready
+ * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void)
+{
+ return (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY));
+}
+
+/**
+ * @brief Get HSI Calibration value
+ * @note When HSITRIM is written, HSICAL is updated with the sum of
+ * HSITRIM and the factory trim value
+ * @rmtoll CR HSICAL LL_RCC_HSI_GetCalibration
+ * @retval Between Min_Data = 0x00 and Max_Data = 0xFF
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSICAL) >> RCC_CR_HSICAL_Pos);
+}
+
+/**
+ * @brief Set HSI Calibration trimming
+ * @note user-programmable trimming value that is added to the HSICAL
+ * @note Default value is 16, which, when added to the HSICAL value,
+ * should trim the HSI to 16 MHz +/- 1 %
+ * @rmtoll CR HSITRIM LL_RCC_HSI_SetCalibTrimming
+ * @param Value Between Min_Data = 0 and Max_Data = 31
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value)
+{
+ MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, Value << RCC_CR_HSITRIM_Pos);
+}
+
+/**
+ * @brief Get HSI Calibration trimming
+ * @rmtoll CR HSITRIM LL_RCC_HSI_GetCalibTrimming
+ * @retval Between Min_Data = 0 and Max_Data = 31
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_LSE LSE
+ * @{
+ */
+
+/**
+ * @brief Enable Low Speed External (LSE) crystal.
+ * @rmtoll BDCR LSEON LL_RCC_LSE_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_Enable(void)
+{
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEON);
+}
+
+/**
+ * @brief Disable Low Speed External (LSE) crystal.
+ * @rmtoll BDCR LSEON LL_RCC_LSE_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_Disable(void)
+{
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON);
+}
+
+/**
+ * @brief Enable external clock source (LSE bypass).
+ * @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void)
+{
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP);
+}
+
+/**
+ * @brief Disable external clock source (LSE bypass).
+ * @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void)
+{
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP);
+}
+
+/**
+ * @brief Set LSE oscillator drive capability
+ * @note The oscillator is in Xtal mode when it is not in bypass mode.
+ * @rmtoll BDCR LSEDRV LL_RCC_LSE_SetDriveCapability
+ * @param LSEDrive This parameter can be one of the following values:
+ * @arg @ref LL_RCC_LSEDRIVE_LOW
+ * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH
+ * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW
+ * @arg @ref LL_RCC_LSEDRIVE_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_SetDriveCapability(uint32_t LSEDrive)
+{
+ MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, LSEDrive);
+}
+
+/**
+ * @brief Get LSE oscillator drive capability
+ * @rmtoll BDCR LSEDRV LL_RCC_LSE_GetDriveCapability
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_LSEDRIVE_LOW
+ * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH
+ * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW
+ * @arg @ref LL_RCC_LSEDRIVE_HIGH
+ */
+__STATIC_INLINE uint32_t LL_RCC_LSE_GetDriveCapability(void)
+{
+ return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSEDRV));
+}
+
+/**
+ * @brief Check if LSE oscillator Ready
+ * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void)
+{
+ return (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == (RCC_BDCR_LSERDY));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_LSI LSI
+ * @{
+ */
+
+/**
+ * @brief Enable LSI Oscillator
+ * @rmtoll CSR LSION LL_RCC_LSI_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSI_Enable(void)
+{
+ SET_BIT(RCC->CSR, RCC_CSR_LSION);
+}
+
+/**
+ * @brief Disable LSI Oscillator
+ * @rmtoll CSR LSION LL_RCC_LSI_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSI_Disable(void)
+{
+ CLEAR_BIT(RCC->CSR, RCC_CSR_LSION);
+}
+
+/**
+ * @brief Check if LSI is Ready
+ * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == (RCC_CSR_LSIRDY));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_System System
+ * @{
+ */
+
+/**
+ * @brief Configure the system clock source
+ * @rmtoll CFGR SW LL_RCC_SetSysClkSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_PLL
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source);
+}
+
+/**
+ * @brief Get the system clock source
+ * @rmtoll CFGR SWS LL_RCC_GetSysClkSource
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS));
+}
+
+/**
+ * @brief Set AHB prescaler
+ * @rmtoll CFGR HPRE LL_RCC_SetAHBPrescaler
+ * @param Prescaler This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SYSCLK_DIV_1
+ * @arg @ref LL_RCC_SYSCLK_DIV_2
+ * @arg @ref LL_RCC_SYSCLK_DIV_4
+ * @arg @ref LL_RCC_SYSCLK_DIV_8
+ * @arg @ref LL_RCC_SYSCLK_DIV_16
+ * @arg @ref LL_RCC_SYSCLK_DIV_64
+ * @arg @ref LL_RCC_SYSCLK_DIV_128
+ * @arg @ref LL_RCC_SYSCLK_DIV_256
+ * @arg @ref LL_RCC_SYSCLK_DIV_512
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, Prescaler);
+}
+
+/**
+ * @brief Set APB1 prescaler
+ * @rmtoll CFGR PPRE1 LL_RCC_SetAPB1Prescaler
+ * @param Prescaler This parameter can be one of the following values:
+ * @arg @ref LL_RCC_APB1_DIV_1
+ * @arg @ref LL_RCC_APB1_DIV_2
+ * @arg @ref LL_RCC_APB1_DIV_4
+ * @arg @ref LL_RCC_APB1_DIV_8
+ * @arg @ref LL_RCC_APB1_DIV_16
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, Prescaler);
+}
+
+/**
+ * @brief Set APB2 prescaler
+ * @rmtoll CFGR PPRE2 LL_RCC_SetAPB2Prescaler
+ * @param Prescaler This parameter can be one of the following values:
+ * @arg @ref LL_RCC_APB2_DIV_1
+ * @arg @ref LL_RCC_APB2_DIV_2
+ * @arg @ref LL_RCC_APB2_DIV_4
+ * @arg @ref LL_RCC_APB2_DIV_8
+ * @arg @ref LL_RCC_APB2_DIV_16
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetAPB2Prescaler(uint32_t Prescaler)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, Prescaler);
+}
+
+/**
+ * @brief Get AHB prescaler
+ * @rmtoll CFGR HPRE LL_RCC_GetAHBPrescaler
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_SYSCLK_DIV_1
+ * @arg @ref LL_RCC_SYSCLK_DIV_2
+ * @arg @ref LL_RCC_SYSCLK_DIV_4
+ * @arg @ref LL_RCC_SYSCLK_DIV_8
+ * @arg @ref LL_RCC_SYSCLK_DIV_16
+ * @arg @ref LL_RCC_SYSCLK_DIV_64
+ * @arg @ref LL_RCC_SYSCLK_DIV_128
+ * @arg @ref LL_RCC_SYSCLK_DIV_256
+ * @arg @ref LL_RCC_SYSCLK_DIV_512
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE));
+}
+
+/**
+ * @brief Get APB1 prescaler
+ * @rmtoll CFGR PPRE1 LL_RCC_GetAPB1Prescaler
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_APB1_DIV_1
+ * @arg @ref LL_RCC_APB1_DIV_2
+ * @arg @ref LL_RCC_APB1_DIV_4
+ * @arg @ref LL_RCC_APB1_DIV_8
+ * @arg @ref LL_RCC_APB1_DIV_16
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE1));
+}
+
+/**
+ * @brief Get APB2 prescaler
+ * @rmtoll CFGR PPRE2 LL_RCC_GetAPB2Prescaler
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_APB2_DIV_1
+ * @arg @ref LL_RCC_APB2_DIV_2
+ * @arg @ref LL_RCC_APB2_DIV_4
+ * @arg @ref LL_RCC_APB2_DIV_8
+ * @arg @ref LL_RCC_APB2_DIV_16
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetAPB2Prescaler(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE2));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_MCO MCO
+ * @{
+ */
+
+/**
+ * @brief Configure MCOx
+ * @rmtoll CFGR MCO1 LL_RCC_ConfigMCO\n
+ * CFGR MCO1PRE LL_RCC_ConfigMCO\n
+ * CFGR MCO2 LL_RCC_ConfigMCO\n
+ * CFGR MCO2PRE LL_RCC_ConfigMCO
+ * @param MCOxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_MCO1SOURCE_HSI
+ * @arg @ref LL_RCC_MCO1SOURCE_LSE
+ * @arg @ref LL_RCC_MCO1SOURCE_HSE
+ * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK
+ * @arg @ref LL_RCC_MCO2SOURCE_SYSCLK
+ * @arg @ref LL_RCC_MCO2SOURCE_PLLI2S
+ * @arg @ref LL_RCC_MCO2SOURCE_HSE
+ * @arg @ref LL_RCC_MCO2SOURCE_PLLCLK
+ * @param MCOxPrescaler This parameter can be one of the following values:
+ * @arg @ref LL_RCC_MCO1_DIV_1
+ * @arg @ref LL_RCC_MCO1_DIV_2
+ * @arg @ref LL_RCC_MCO1_DIV_3
+ * @arg @ref LL_RCC_MCO1_DIV_4
+ * @arg @ref LL_RCC_MCO1_DIV_5
+ * @arg @ref LL_RCC_MCO2_DIV_1
+ * @arg @ref LL_RCC_MCO2_DIV_2
+ * @arg @ref LL_RCC_MCO2_DIV_3
+ * @arg @ref LL_RCC_MCO2_DIV_4
+ * @arg @ref LL_RCC_MCO2_DIV_5
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler)
+{
+ MODIFY_REG(RCC->CFGR, (MCOxSource & 0xFFFF0000U) | (MCOxPrescaler & 0xFFFF0000U), (MCOxSource << 16U) | (MCOxPrescaler << 16U));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source
+ * @{
+ */
+
+/**
+ * @brief Configure USARTx clock source
+ * @rmtoll DCKCFGR2 USART1SEL LL_RCC_SetUSARTClockSource\n
+ * DCKCFGR2 USART2SEL LL_RCC_SetUSARTClockSource\n
+ * DCKCFGR2 USART3SEL LL_RCC_SetUSARTClockSource\n
+ * DCKCFGR2 USART6SEL LL_RCC_SetUSARTClockSource
+ * @param USARTxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK2
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_USART6_CLKSOURCE_PCLK2
+ * @arg @ref LL_RCC_USART6_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_USART6_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_USART6_CLKSOURCE_LSE
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetUSARTClockSource(uint32_t USARTxSource)
+{
+ MODIFY_REG(RCC->DCKCFGR2, (USARTxSource >> 16U), (USARTxSource & 0x0000FFFFU));
+}
+
+/**
+ * @brief Configure UARTx clock source
+ * @rmtoll DCKCFGR2 UART4SEL LL_RCC_SetUARTClockSource\n
+ * DCKCFGR2 UART5SEL LL_RCC_SetUARTClockSource\n
+ * DCKCFGR2 UART7SEL LL_RCC_SetUARTClockSource\n
+ * DCKCFGR2 UART8SEL LL_RCC_SetUARTClockSource
+ * @param UARTxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_UART7_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_UART7_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_UART7_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_UART7_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_UART8_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_UART8_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_UART8_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_UART8_CLKSOURCE_LSE
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetUARTClockSource(uint32_t UARTxSource)
+{
+ MODIFY_REG(RCC->DCKCFGR2, (UARTxSource >> 16U), (UARTxSource & 0x0000FFFFU));
+}
+
+/**
+ * @brief Configure I2Cx clock source
+ * @rmtoll DCKCFGR2 I2C1SEL LL_RCC_SetI2CClockSource\n
+ * DCKCFGR2 I2C2SEL LL_RCC_SetI2CClockSource\n
+ * DCKCFGR2 I2C3SEL LL_RCC_SetI2CClockSource\n
+ * DCKCFGR2 I2C4SEL LL_RCC_SetI2CClockSource
+ * @param I2CxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_I2C4_CLKSOURCE_SYSCLK (*)
+ * @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetI2CClockSource(uint32_t I2CxSource)
+{
+ MODIFY_REG(RCC->DCKCFGR2, (I2CxSource & 0xFFFF0000U), (I2CxSource << 16U));
+}
+
+/**
+ * @brief Configure LPTIMx clock source
+ * @rmtoll DCKCFGR2 LPTIM1SEL LL_RCC_SetLPTIMClockSource
+ * @param LPTIMxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetLPTIMClockSource(uint32_t LPTIMxSource)
+{
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, LPTIMxSource);
+}
+
+/**
+ * @brief Configure SAIx clock source
+ * @rmtoll DCKCFGR1 SAI1SEL LL_RCC_SetSAIClockSource\n
+ * DCKCFGR1 SAI2SEL LL_RCC_SetSAIClockSource
+ * @param SAIxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLI2S
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSRC (*)
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLI2S
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE_PIN
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSRC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetSAIClockSource(uint32_t SAIxSource)
+{
+ MODIFY_REG(RCC->DCKCFGR1, (SAIxSource & 0xFFFF0000U), (SAIxSource << 16U));
+}
+
+/**
+ * @brief Configure SDMMC clock source
+ * @rmtoll DCKCFGR2 SDMMC1SEL LL_RCC_SetSDMMCClockSource\n
+ * DCKCFGR2 SDMMC2SEL LL_RCC_SetSDMMCClockSource
+ * @param SDMMCxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_PLL48CLK
+ * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_SDMMC2_CLKSOURCE_PLL48CLK (*)
+ * @arg @ref LL_RCC_SDMMC2_CLKSOURCE_SYSCLK (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetSDMMCClockSource(uint32_t SDMMCxSource)
+{
+ MODIFY_REG(RCC->DCKCFGR2, (SDMMCxSource & 0xFFFF0000U), (SDMMCxSource << 16U));
+}
+
+/**
+ * @brief Configure 48Mhz domain clock source
+ * @rmtoll DCKCFGR2 CK48MSEL LL_RCC_SetCK48MClockSource
+ * @param CK48MxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLL
+ * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLSAI
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetCK48MClockSource(uint32_t CK48MxSource)
+{
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, CK48MxSource);
+}
+
+/**
+ * @brief Configure RNG clock source
+ * @rmtoll DCKCFGR2 CK48MSEL LL_RCC_SetRNGClockSource
+ * @param RNGxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL
+ * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLSAI
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetRNGClockSource(uint32_t RNGxSource)
+{
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, RNGxSource);
+}
+
+/**
+ * @brief Configure USB clock source
+ * @rmtoll DCKCFGR2 CK48MSEL LL_RCC_SetUSBClockSource
+ * @param USBxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USB_CLKSOURCE_PLL
+ * @arg @ref LL_RCC_USB_CLKSOURCE_PLLSAI
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource)
+{
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, USBxSource);
+}
+
+#if defined(CEC)
+/**
+ * @brief Configure CEC clock source
+ * @rmtoll DCKCFGR2 CECSEL LL_RCC_SetCECClockSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV488
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetCECClockSource(uint32_t Source)
+{
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, Source);
+}
+#endif /* CEC */
+
+/**
+ * @brief Configure I2S clock source
+ * @rmtoll CFGR I2SSRC LL_RCC_SetI2SClockSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLI2S
+ * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetI2SClockSource(uint32_t Source)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_I2SSRC, Source);
+}
+
+#if defined(DSI)
+/**
+ * @brief Configure DSI clock source
+ * @rmtoll DCKCFGR2 DSISEL LL_RCC_SetDSIClockSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_DSI_CLKSOURCE_PHY
+ * @arg @ref LL_RCC_DSI_CLKSOURCE_PLL
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetDSIClockSource(uint32_t Source)
+{
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_DSISEL, Source);
+}
+#endif /* DSI */
+
+#if defined(DFSDM1_Channel0)
+/**
+ * @brief Configure DFSDM Audio clock source
+ * @rmtoll DCKCFGR1 ADFSDM1SEL LL_RCC_SetDFSDMAudioClockSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI1
+ * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI2
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetDFSDMAudioClockSource(uint32_t Source)
+{
+ MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_ADFSDM1SEL, Source);
+}
+
+/**
+ * @brief Configure DFSDM Kernel clock source
+ * @rmtoll DCKCFGR1 DFSDM1SEL LL_RCC_SetDFSDMClockSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2
+ * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetDFSDMClockSource(uint32_t Source)
+{
+ MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_DFSDM1SEL, Source);
+}
+#endif /* DFSDM1_Channel0 */
+
+/**
+ * @brief Get USARTx clock source
+ * @rmtoll DCKCFGR2 USART1SEL LL_RCC_GetUSARTClockSource\n
+ * DCKCFGR2 USART2SEL LL_RCC_GetUSARTClockSource\n
+ * DCKCFGR2 USART3SEL LL_RCC_GetUSARTClockSource\n
+ * DCKCFGR2 USART6SEL LL_RCC_GetUSARTClockSource
+ * @param USARTx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USART1_CLKSOURCE
+ * @arg @ref LL_RCC_USART2_CLKSOURCE
+ * @arg @ref LL_RCC_USART3_CLKSOURCE
+ * @arg @ref LL_RCC_USART6_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK2
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_USART6_CLKSOURCE_PCLK2
+ * @arg @ref LL_RCC_USART6_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_USART6_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_USART6_CLKSOURCE_LSE
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetUSARTClockSource(uint32_t USARTx)
+{
+ return (uint32_t)(READ_BIT(RCC->DCKCFGR2, USARTx) | (USARTx << 16U));
+}
+
+/**
+ * @brief Get UARTx clock source
+ * @rmtoll DCKCFGR2 UART4SEL LL_RCC_GetUARTClockSource\n
+ * DCKCFGR2 UART5SEL LL_RCC_GetUARTClockSource\n
+ * DCKCFGR2 UART7SEL LL_RCC_GetUARTClockSource\n
+ * DCKCFGR2 UART8SEL LL_RCC_GetUARTClockSource
+ * @param UARTx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_UART4_CLKSOURCE
+ * @arg @ref LL_RCC_UART5_CLKSOURCE
+ * @arg @ref LL_RCC_UART7_CLKSOURCE
+ * @arg @ref LL_RCC_UART8_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_UART7_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_UART7_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_UART7_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_UART7_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_UART8_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_UART8_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_UART8_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_UART8_CLKSOURCE_LSE
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetUARTClockSource(uint32_t UARTx)
+{
+ return (uint32_t)(READ_BIT(RCC->DCKCFGR2, UARTx) | (UARTx << 16U));
+}
+
+/**
+ * @brief Get I2Cx clock source
+ * @rmtoll DCKCFGR2 I2C1SEL LL_RCC_GetI2CClockSource\n
+ * DCKCFGR2 I2C2SEL LL_RCC_GetI2CClockSource\n
+ * DCKCFGR2 I2C3SEL LL_RCC_GetI2CClockSource\n
+ * DCKCFGR2 I2C4SEL LL_RCC_GetI2CClockSource
+ * @param I2Cx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE
+ * @arg @ref LL_RCC_I2C4_CLKSOURCE (*)
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_I2C4_CLKSOURCE_SYSCLK (*)
+ * @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI (*)
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetI2CClockSource(uint32_t I2Cx)
+{
+ return (uint32_t)((READ_BIT(RCC->DCKCFGR2, I2Cx) >> 16U) | I2Cx);
+}
+
+/**
+ * @brief Get LPTIMx clock source
+ * @rmtoll DCKCFGR2 LPTIM1SEL LL_RCC_GetLPTIMClockSource
+ * @param LPTIMx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetLPTIMClockSource(uint32_t LPTIMx)
+{
+ return (uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL));
+}
+
+/**
+ * @brief Get SAIx clock source
+ * @rmtoll DCKCFGR1 SAI1SEL LL_RCC_GetSAIClockSource\n
+ * DCKCFGR1 SAI2SEL LL_RCC_GetSAIClockSource
+ * @param SAIx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLI2S
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSRC (*)
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLI2S
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE_PIN
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSRC (*)
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetSAIClockSource(uint32_t SAIx)
+{
+ return (uint32_t)(READ_BIT(RCC->DCKCFGR1, SAIx) >> 16U | SAIx);
+}
+
+/**
+ * @brief Get SDMMCx clock source
+ * @rmtoll DCKCFGR2 SDMMC1SEL LL_RCC_GetSDMMCClockSource\n
+ * DCKCFGR2 SDMMC2SEL LL_RCC_GetSDMMCClockSource
+ * @param SDMMCx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SDMMC1_CLKSOURCE
+ * @arg @ref LL_RCC_SDMMC1_CLKSOURCE (*)
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_PLL48CLK
+ * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_SDMMC2_CLKSOURCE_PLL48CLK (*)
+ * @arg @ref LL_RCC_SDMMC2_CLKSOURCE_SYSCLK (*)
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetSDMMCClockSource(uint32_t SDMMCx)
+{
+ return (uint32_t)(READ_BIT(RCC->DCKCFGR2, SDMMCx) >> 16U | SDMMCx);
+}
+
+/**
+ * @brief Get 48Mhz domain clock source
+ * @rmtoll DCKCFGR2 CK48MSEL LL_RCC_GetCK48MClockSource
+ * @param CK48Mx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_CK48M_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLL
+ * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLSAI
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetCK48MClockSource(uint32_t CK48Mx)
+{
+ return (uint32_t)(READ_BIT(RCC->DCKCFGR2, CK48Mx));
+}
+
+/**
+ * @brief Get RNGx clock source
+ * @rmtoll DCKCFGR2 CK48MSEL LL_RCC_GetRNGClockSource
+ * @param RNGx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_RNG_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL
+ * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLSAI
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetRNGClockSource(uint32_t RNGx)
+{
+ return (uint32_t)(READ_BIT(RCC->DCKCFGR2, RNGx));
+}
+
+/**
+ * @brief Get USBx clock source
+ * @rmtoll DCKCFGR2 CK48MSEL LL_RCC_GetUSBClockSource
+ * @param USBx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USB_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_USB_CLKSOURCE_PLL
+ * @arg @ref LL_RCC_USB_CLKSOURCE_PLLSAI
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx)
+{
+ return (uint32_t)(READ_BIT(RCC->DCKCFGR2, USBx));
+}
+
+#if defined(CEC)
+/**
+ * @brief Get CEC Clock Source
+ * @rmtoll DCKCFGR2 CECSEL LL_RCC_GetCECClockSource
+ * @param CECx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_CEC_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV488
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetCECClockSource(uint32_t CECx)
+{
+ return (uint32_t)(READ_BIT(RCC->DCKCFGR2, CECx));
+}
+#endif /* CEC */
+
+/**
+ * @brief Get I2S Clock Source
+ * @rmtoll CFGR I2SSRC LL_RCC_GetI2SClockSource
+ * @param I2Sx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_I2S1_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLI2S
+ * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetI2SClockSource(uint32_t I2Sx)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, I2Sx));
+}
+
+#if defined(DFSDM1_Channel0)
+/**
+ * @brief Get DFSDM Audio Clock Source
+ * @rmtoll DCKCFGR1 ADFSDM1SEL LL_RCC_GetDFSDMAudioClockSource
+ * @param DFSDMx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI1
+ * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI2
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetDFSDMAudioClockSource(uint32_t DFSDMx)
+{
+ return (uint32_t)(READ_BIT(RCC->DCKCFGR1, DFSDMx));
+}
+
+/**
+ * @brief Get DFSDM Audio Clock Source
+ * @rmtoll DCKCFGR1 DFSDM1SEL LL_RCC_GetDFSDMClockSource
+ * @param DFSDMx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_DFSDM1_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2
+ * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetDFSDMClockSource(uint32_t DFSDMx)
+{
+ return (uint32_t)(READ_BIT(RCC->DCKCFGR1, DFSDMx));
+}
+#endif /* DFSDM1_Channel0 */
+
+#if defined(DSI)
+/**
+ * @brief Get DSI Clock Source
+ * @rmtoll DCKCFGR2 DSISEL LL_RCC_GetDSIClockSource
+ * @param DSIx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_DSI_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_DSI_CLKSOURCE_PHY
+ * @arg @ref LL_RCC_DSI_CLKSOURCE_PLL
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetDSIClockSource(uint32_t DSIx)
+{
+ return (uint32_t)(READ_BIT(RCC->DCKCFGR2, DSIx));
+}
+#endif /* DSI */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_RTC RTC
+ * @{
+ */
+
+/**
+ * @brief Set RTC Clock Source
+ * @note Once the RTC clock source has been selected, it cannot be changed anymore unless
+ * the Backup domain is reset, or unless a failure is detected on LSE (LSECSSD is
+ * set). The BDRST bit can be used to reset them.
+ * @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source)
+{
+ MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source);
+}
+
+/**
+ * @brief Get RTC Clock Source
+ * @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void)
+{
+ return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL));
+}
+
+/**
+ * @brief Enable RTC
+ * @rmtoll BDCR RTCEN LL_RCC_EnableRTC
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableRTC(void)
+{
+ SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN);
+}
+
+/**
+ * @brief Disable RTC
+ * @rmtoll BDCR RTCEN LL_RCC_DisableRTC
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableRTC(void)
+{
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN);
+}
+
+/**
+ * @brief Check if RTC has been enabled or not
+ * @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void)
+{
+ return (READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == (RCC_BDCR_RTCEN));
+}
+
+/**
+ * @brief Force the Backup domain reset
+ * @rmtoll BDCR BDRST LL_RCC_ForceBackupDomainReset
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void)
+{
+ SET_BIT(RCC->BDCR, RCC_BDCR_BDRST);
+}
+
+/**
+ * @brief Release the Backup domain reset
+ * @rmtoll BDCR BDRST LL_RCC_ReleaseBackupDomainReset
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void)
+{
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST);
+}
+
+/**
+ * @brief Set HSE Prescalers for RTC Clock
+ * @rmtoll CFGR RTCPRE LL_RCC_SetRTC_HSEPrescaler
+ * @param Prescaler This parameter can be one of the following values:
+ * @arg @ref LL_RCC_RTC_NOCLOCK
+ * @arg @ref LL_RCC_RTC_HSE_DIV_2
+ * @arg @ref LL_RCC_RTC_HSE_DIV_3
+ * @arg @ref LL_RCC_RTC_HSE_DIV_4
+ * @arg @ref LL_RCC_RTC_HSE_DIV_5
+ * @arg @ref LL_RCC_RTC_HSE_DIV_6
+ * @arg @ref LL_RCC_RTC_HSE_DIV_7
+ * @arg @ref LL_RCC_RTC_HSE_DIV_8
+ * @arg @ref LL_RCC_RTC_HSE_DIV_9
+ * @arg @ref LL_RCC_RTC_HSE_DIV_10
+ * @arg @ref LL_RCC_RTC_HSE_DIV_11
+ * @arg @ref LL_RCC_RTC_HSE_DIV_12
+ * @arg @ref LL_RCC_RTC_HSE_DIV_13
+ * @arg @ref LL_RCC_RTC_HSE_DIV_14
+ * @arg @ref LL_RCC_RTC_HSE_DIV_15
+ * @arg @ref LL_RCC_RTC_HSE_DIV_16
+ * @arg @ref LL_RCC_RTC_HSE_DIV_17
+ * @arg @ref LL_RCC_RTC_HSE_DIV_18
+ * @arg @ref LL_RCC_RTC_HSE_DIV_19
+ * @arg @ref LL_RCC_RTC_HSE_DIV_20
+ * @arg @ref LL_RCC_RTC_HSE_DIV_21
+ * @arg @ref LL_RCC_RTC_HSE_DIV_22
+ * @arg @ref LL_RCC_RTC_HSE_DIV_23
+ * @arg @ref LL_RCC_RTC_HSE_DIV_24
+ * @arg @ref LL_RCC_RTC_HSE_DIV_25
+ * @arg @ref LL_RCC_RTC_HSE_DIV_26
+ * @arg @ref LL_RCC_RTC_HSE_DIV_27
+ * @arg @ref LL_RCC_RTC_HSE_DIV_28
+ * @arg @ref LL_RCC_RTC_HSE_DIV_29
+ * @arg @ref LL_RCC_RTC_HSE_DIV_30
+ * @arg @ref LL_RCC_RTC_HSE_DIV_31
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetRTC_HSEPrescaler(uint32_t Prescaler)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, Prescaler);
+}
+
+/**
+ * @brief Get HSE Prescalers for RTC Clock
+ * @rmtoll CFGR RTCPRE LL_RCC_GetRTC_HSEPrescaler
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_RTC_NOCLOCK
+ * @arg @ref LL_RCC_RTC_HSE_DIV_2
+ * @arg @ref LL_RCC_RTC_HSE_DIV_3
+ * @arg @ref LL_RCC_RTC_HSE_DIV_4
+ * @arg @ref LL_RCC_RTC_HSE_DIV_5
+ * @arg @ref LL_RCC_RTC_HSE_DIV_6
+ * @arg @ref LL_RCC_RTC_HSE_DIV_7
+ * @arg @ref LL_RCC_RTC_HSE_DIV_8
+ * @arg @ref LL_RCC_RTC_HSE_DIV_9
+ * @arg @ref LL_RCC_RTC_HSE_DIV_10
+ * @arg @ref LL_RCC_RTC_HSE_DIV_11
+ * @arg @ref LL_RCC_RTC_HSE_DIV_12
+ * @arg @ref LL_RCC_RTC_HSE_DIV_13
+ * @arg @ref LL_RCC_RTC_HSE_DIV_14
+ * @arg @ref LL_RCC_RTC_HSE_DIV_15
+ * @arg @ref LL_RCC_RTC_HSE_DIV_16
+ * @arg @ref LL_RCC_RTC_HSE_DIV_17
+ * @arg @ref LL_RCC_RTC_HSE_DIV_18
+ * @arg @ref LL_RCC_RTC_HSE_DIV_19
+ * @arg @ref LL_RCC_RTC_HSE_DIV_20
+ * @arg @ref LL_RCC_RTC_HSE_DIV_21
+ * @arg @ref LL_RCC_RTC_HSE_DIV_22
+ * @arg @ref LL_RCC_RTC_HSE_DIV_23
+ * @arg @ref LL_RCC_RTC_HSE_DIV_24
+ * @arg @ref LL_RCC_RTC_HSE_DIV_25
+ * @arg @ref LL_RCC_RTC_HSE_DIV_26
+ * @arg @ref LL_RCC_RTC_HSE_DIV_27
+ * @arg @ref LL_RCC_RTC_HSE_DIV_28
+ * @arg @ref LL_RCC_RTC_HSE_DIV_29
+ * @arg @ref LL_RCC_RTC_HSE_DIV_30
+ * @arg @ref LL_RCC_RTC_HSE_DIV_31
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetRTC_HSEPrescaler(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_TIM_CLOCK_PRESCALER TIM
+ * @{
+ */
+
+/**
+ * @brief Set Timers Clock Prescalers
+ * @rmtoll DCKCFGR1 TIMPRE LL_RCC_SetTIMPrescaler
+ * @param Prescaler This parameter can be one of the following values:
+ * @arg @ref LL_RCC_TIM_PRESCALER_TWICE
+ * @arg @ref LL_RCC_TIM_PRESCALER_FOUR_TIMES
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetTIMPrescaler(uint32_t Prescaler)
+{
+ MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_TIMPRE, Prescaler);
+}
+
+/**
+ * @brief Get Timers Clock Prescalers
+ * @rmtoll DCKCFGR1 TIMPRE LL_RCC_GetTIMPrescaler
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_TIM_PRESCALER_TWICE
+ * @arg @ref LL_RCC_TIM_PRESCALER_FOUR_TIMES
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetTIMPrescaler(void)
+{
+ return (uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_TIMPRE));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_PLL PLL
+ * @{
+ */
+
+/**
+ * @brief Enable PLL
+ * @rmtoll CR PLLON LL_RCC_PLL_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_Enable(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_PLLON);
+}
+
+/**
+ * @brief Disable PLL
+ * @note Cannot be disabled if the PLL clock is used as the system clock
+ * @rmtoll CR PLLON LL_RCC_PLL_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_Disable(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_PLLON);
+}
+
+/**
+ * @brief Check if PLL Ready
+ * @rmtoll CR PLLRDY LL_RCC_PLL_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void)
+{
+ return (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == (RCC_CR_PLLRDY));
+}
+
+/**
+ * @brief Configure PLL used for SYSCLK Domain
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLI2S and PLLSAI are disabled
+ * @note PLLN/PLLP can be written only when PLL is disabled
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n
+ * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SYS\n
+ * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SYS\n
+ * PLLCFGR PLLP LL_RCC_PLL_ConfigDomain_SYS
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9
+ * @arg @ref LL_RCC_PLLM_DIV_10
+ * @arg @ref LL_RCC_PLLM_DIV_11
+ * @arg @ref LL_RCC_PLLM_DIV_12
+ * @arg @ref LL_RCC_PLLM_DIV_13
+ * @arg @ref LL_RCC_PLLM_DIV_14
+ * @arg @ref LL_RCC_PLLM_DIV_15
+ * @arg @ref LL_RCC_PLLM_DIV_16
+ * @arg @ref LL_RCC_PLLM_DIV_17
+ * @arg @ref LL_RCC_PLLM_DIV_18
+ * @arg @ref LL_RCC_PLLM_DIV_19
+ * @arg @ref LL_RCC_PLLM_DIV_20
+ * @arg @ref LL_RCC_PLLM_DIV_21
+ * @arg @ref LL_RCC_PLLM_DIV_22
+ * @arg @ref LL_RCC_PLLM_DIV_23
+ * @arg @ref LL_RCC_PLLM_DIV_24
+ * @arg @ref LL_RCC_PLLM_DIV_25
+ * @arg @ref LL_RCC_PLLM_DIV_26
+ * @arg @ref LL_RCC_PLLM_DIV_27
+ * @arg @ref LL_RCC_PLLM_DIV_28
+ * @arg @ref LL_RCC_PLLM_DIV_29
+ * @arg @ref LL_RCC_PLLM_DIV_30
+ * @arg @ref LL_RCC_PLLM_DIV_31
+ * @arg @ref LL_RCC_PLLM_DIV_32
+ * @arg @ref LL_RCC_PLLM_DIV_33
+ * @arg @ref LL_RCC_PLLM_DIV_34
+ * @arg @ref LL_RCC_PLLM_DIV_35
+ * @arg @ref LL_RCC_PLLM_DIV_36
+ * @arg @ref LL_RCC_PLLM_DIV_37
+ * @arg @ref LL_RCC_PLLM_DIV_38
+ * @arg @ref LL_RCC_PLLM_DIV_39
+ * @arg @ref LL_RCC_PLLM_DIV_40
+ * @arg @ref LL_RCC_PLLM_DIV_41
+ * @arg @ref LL_RCC_PLLM_DIV_42
+ * @arg @ref LL_RCC_PLLM_DIV_43
+ * @arg @ref LL_RCC_PLLM_DIV_44
+ * @arg @ref LL_RCC_PLLM_DIV_45
+ * @arg @ref LL_RCC_PLLM_DIV_46
+ * @arg @ref LL_RCC_PLLM_DIV_47
+ * @arg @ref LL_RCC_PLLM_DIV_48
+ * @arg @ref LL_RCC_PLLM_DIV_49
+ * @arg @ref LL_RCC_PLLM_DIV_50
+ * @arg @ref LL_RCC_PLLM_DIV_51
+ * @arg @ref LL_RCC_PLLM_DIV_52
+ * @arg @ref LL_RCC_PLLM_DIV_53
+ * @arg @ref LL_RCC_PLLM_DIV_54
+ * @arg @ref LL_RCC_PLLM_DIV_55
+ * @arg @ref LL_RCC_PLLM_DIV_56
+ * @arg @ref LL_RCC_PLLM_DIV_57
+ * @arg @ref LL_RCC_PLLM_DIV_58
+ * @arg @ref LL_RCC_PLLM_DIV_59
+ * @arg @ref LL_RCC_PLLM_DIV_60
+ * @arg @ref LL_RCC_PLLM_DIV_61
+ * @arg @ref LL_RCC_PLLM_DIV_62
+ * @arg @ref LL_RCC_PLLM_DIV_63
+ * @param PLLN Between 50 and 432
+ * @param PLLP This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLP_DIV_2
+ * @arg @ref LL_RCC_PLLP_DIV_4
+ * @arg @ref LL_RCC_PLLP_DIV_6
+ * @arg @ref LL_RCC_PLLP_DIV_8
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLP,
+ Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLP);
+}
+
+/**
+ * @brief Configure PLL used for 48Mhz domain clock
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLI2S and PLLSAI are disabled
+ * @note PLLN/PLLQ can be written only when PLL is disabled
+ * @note This can be selected for USB, RNG, SDMMC1
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_48M\n
+ * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_48M\n
+ * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_48M\n
+ * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_48M
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9
+ * @arg @ref LL_RCC_PLLM_DIV_10
+ * @arg @ref LL_RCC_PLLM_DIV_11
+ * @arg @ref LL_RCC_PLLM_DIV_12
+ * @arg @ref LL_RCC_PLLM_DIV_13
+ * @arg @ref LL_RCC_PLLM_DIV_14
+ * @arg @ref LL_RCC_PLLM_DIV_15
+ * @arg @ref LL_RCC_PLLM_DIV_16
+ * @arg @ref LL_RCC_PLLM_DIV_17
+ * @arg @ref LL_RCC_PLLM_DIV_18
+ * @arg @ref LL_RCC_PLLM_DIV_19
+ * @arg @ref LL_RCC_PLLM_DIV_20
+ * @arg @ref LL_RCC_PLLM_DIV_21
+ * @arg @ref LL_RCC_PLLM_DIV_22
+ * @arg @ref LL_RCC_PLLM_DIV_23
+ * @arg @ref LL_RCC_PLLM_DIV_24
+ * @arg @ref LL_RCC_PLLM_DIV_25
+ * @arg @ref LL_RCC_PLLM_DIV_26
+ * @arg @ref LL_RCC_PLLM_DIV_27
+ * @arg @ref LL_RCC_PLLM_DIV_28
+ * @arg @ref LL_RCC_PLLM_DIV_29
+ * @arg @ref LL_RCC_PLLM_DIV_30
+ * @arg @ref LL_RCC_PLLM_DIV_31
+ * @arg @ref LL_RCC_PLLM_DIV_32
+ * @arg @ref LL_RCC_PLLM_DIV_33
+ * @arg @ref LL_RCC_PLLM_DIV_34
+ * @arg @ref LL_RCC_PLLM_DIV_35
+ * @arg @ref LL_RCC_PLLM_DIV_36
+ * @arg @ref LL_RCC_PLLM_DIV_37
+ * @arg @ref LL_RCC_PLLM_DIV_38
+ * @arg @ref LL_RCC_PLLM_DIV_39
+ * @arg @ref LL_RCC_PLLM_DIV_40
+ * @arg @ref LL_RCC_PLLM_DIV_41
+ * @arg @ref LL_RCC_PLLM_DIV_42
+ * @arg @ref LL_RCC_PLLM_DIV_43
+ * @arg @ref LL_RCC_PLLM_DIV_44
+ * @arg @ref LL_RCC_PLLM_DIV_45
+ * @arg @ref LL_RCC_PLLM_DIV_46
+ * @arg @ref LL_RCC_PLLM_DIV_47
+ * @arg @ref LL_RCC_PLLM_DIV_48
+ * @arg @ref LL_RCC_PLLM_DIV_49
+ * @arg @ref LL_RCC_PLLM_DIV_50
+ * @arg @ref LL_RCC_PLLM_DIV_51
+ * @arg @ref LL_RCC_PLLM_DIV_52
+ * @arg @ref LL_RCC_PLLM_DIV_53
+ * @arg @ref LL_RCC_PLLM_DIV_54
+ * @arg @ref LL_RCC_PLLM_DIV_55
+ * @arg @ref LL_RCC_PLLM_DIV_56
+ * @arg @ref LL_RCC_PLLM_DIV_57
+ * @arg @ref LL_RCC_PLLM_DIV_58
+ * @arg @ref LL_RCC_PLLM_DIV_59
+ * @arg @ref LL_RCC_PLLM_DIV_60
+ * @arg @ref LL_RCC_PLLM_DIV_61
+ * @arg @ref LL_RCC_PLLM_DIV_62
+ * @arg @ref LL_RCC_PLLM_DIV_63
+ * @param PLLN Between 50 and 432
+ * @param PLLQ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLQ_DIV_2
+ * @arg @ref LL_RCC_PLLQ_DIV_3
+ * @arg @ref LL_RCC_PLLQ_DIV_4
+ * @arg @ref LL_RCC_PLLQ_DIV_5
+ * @arg @ref LL_RCC_PLLQ_DIV_6
+ * @arg @ref LL_RCC_PLLQ_DIV_7
+ * @arg @ref LL_RCC_PLLQ_DIV_8
+ * @arg @ref LL_RCC_PLLQ_DIV_9
+ * @arg @ref LL_RCC_PLLQ_DIV_10
+ * @arg @ref LL_RCC_PLLQ_DIV_11
+ * @arg @ref LL_RCC_PLLQ_DIV_12
+ * @arg @ref LL_RCC_PLLQ_DIV_13
+ * @arg @ref LL_RCC_PLLQ_DIV_14
+ * @arg @ref LL_RCC_PLLQ_DIV_15
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ,
+ Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLQ);
+}
+
+#if defined(DSI)
+/**
+ * @brief Configure PLL used for DSI clock
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLI2S and PLLSAI are disabled
+ * @note PLLN/PLLR can be written only when PLL is disabled
+ * @note This can be selected for DSI
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_DSI\n
+ * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_DSI\n
+ * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_DSI\n
+ * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_DSI
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9
+ * @arg @ref LL_RCC_PLLM_DIV_10
+ * @arg @ref LL_RCC_PLLM_DIV_11
+ * @arg @ref LL_RCC_PLLM_DIV_12
+ * @arg @ref LL_RCC_PLLM_DIV_13
+ * @arg @ref LL_RCC_PLLM_DIV_14
+ * @arg @ref LL_RCC_PLLM_DIV_15
+ * @arg @ref LL_RCC_PLLM_DIV_16
+ * @arg @ref LL_RCC_PLLM_DIV_17
+ * @arg @ref LL_RCC_PLLM_DIV_18
+ * @arg @ref LL_RCC_PLLM_DIV_19
+ * @arg @ref LL_RCC_PLLM_DIV_20
+ * @arg @ref LL_RCC_PLLM_DIV_21
+ * @arg @ref LL_RCC_PLLM_DIV_22
+ * @arg @ref LL_RCC_PLLM_DIV_23
+ * @arg @ref LL_RCC_PLLM_DIV_24
+ * @arg @ref LL_RCC_PLLM_DIV_25
+ * @arg @ref LL_RCC_PLLM_DIV_26
+ * @arg @ref LL_RCC_PLLM_DIV_27
+ * @arg @ref LL_RCC_PLLM_DIV_28
+ * @arg @ref LL_RCC_PLLM_DIV_29
+ * @arg @ref LL_RCC_PLLM_DIV_30
+ * @arg @ref LL_RCC_PLLM_DIV_31
+ * @arg @ref LL_RCC_PLLM_DIV_32
+ * @arg @ref LL_RCC_PLLM_DIV_33
+ * @arg @ref LL_RCC_PLLM_DIV_34
+ * @arg @ref LL_RCC_PLLM_DIV_35
+ * @arg @ref LL_RCC_PLLM_DIV_36
+ * @arg @ref LL_RCC_PLLM_DIV_37
+ * @arg @ref LL_RCC_PLLM_DIV_38
+ * @arg @ref LL_RCC_PLLM_DIV_39
+ * @arg @ref LL_RCC_PLLM_DIV_40
+ * @arg @ref LL_RCC_PLLM_DIV_41
+ * @arg @ref LL_RCC_PLLM_DIV_42
+ * @arg @ref LL_RCC_PLLM_DIV_43
+ * @arg @ref LL_RCC_PLLM_DIV_44
+ * @arg @ref LL_RCC_PLLM_DIV_45
+ * @arg @ref LL_RCC_PLLM_DIV_46
+ * @arg @ref LL_RCC_PLLM_DIV_47
+ * @arg @ref LL_RCC_PLLM_DIV_48
+ * @arg @ref LL_RCC_PLLM_DIV_49
+ * @arg @ref LL_RCC_PLLM_DIV_50
+ * @arg @ref LL_RCC_PLLM_DIV_51
+ * @arg @ref LL_RCC_PLLM_DIV_52
+ * @arg @ref LL_RCC_PLLM_DIV_53
+ * @arg @ref LL_RCC_PLLM_DIV_54
+ * @arg @ref LL_RCC_PLLM_DIV_55
+ * @arg @ref LL_RCC_PLLM_DIV_56
+ * @arg @ref LL_RCC_PLLM_DIV_57
+ * @arg @ref LL_RCC_PLLM_DIV_58
+ * @arg @ref LL_RCC_PLLM_DIV_59
+ * @arg @ref LL_RCC_PLLM_DIV_60
+ * @arg @ref LL_RCC_PLLM_DIV_61
+ * @arg @ref LL_RCC_PLLM_DIV_62
+ * @arg @ref LL_RCC_PLLM_DIV_63
+ * @param PLLN Between 50 and 432
+ * @param PLLR This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLR_DIV_2
+ * @arg @ref LL_RCC_PLLR_DIV_3
+ * @arg @ref LL_RCC_PLLR_DIV_4
+ * @arg @ref LL_RCC_PLLR_DIV_5
+ * @arg @ref LL_RCC_PLLR_DIV_6
+ * @arg @ref LL_RCC_PLLR_DIV_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_DSI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR,
+ Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR);
+}
+#endif /* DSI */
+
+/**
+ * @brief Configure PLL clock source
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_SetMainSource
+ * @param PLLSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_SetMainSource(uint32_t PLLSource)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PLLSource);
+}
+
+/**
+ * @brief Get the oscillator used as PLL clock source.
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_GetMainSource
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC));
+}
+
+/**
+ * @brief Get Main PLL multiplication factor for VCO
+ * @rmtoll PLLCFGR PLLN LL_RCC_PLL_GetN
+ * @retval Between 50 and 432
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetN(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos);
+}
+
+/**
+ * @brief Get Main PLL division factor for PLLP
+ * @rmtoll PLLCFGR PLLP LL_RCC_PLL_GetP
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLP_DIV_2
+ * @arg @ref LL_RCC_PLLP_DIV_4
+ * @arg @ref LL_RCC_PLLP_DIV_6
+ * @arg @ref LL_RCC_PLLP_DIV_8
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetP(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP));
+}
+
+/**
+ * @brief Get Main PLL division factor for PLLQ
+ * @note used for PLL48MCLK selected for USB, RNG, SDMMC (48 MHz clock)
+ * @rmtoll PLLCFGR PLLQ LL_RCC_PLL_GetQ
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLQ_DIV_2
+ * @arg @ref LL_RCC_PLLQ_DIV_3
+ * @arg @ref LL_RCC_PLLQ_DIV_4
+ * @arg @ref LL_RCC_PLLQ_DIV_5
+ * @arg @ref LL_RCC_PLLQ_DIV_6
+ * @arg @ref LL_RCC_PLLQ_DIV_7
+ * @arg @ref LL_RCC_PLLQ_DIV_8
+ * @arg @ref LL_RCC_PLLQ_DIV_9
+ * @arg @ref LL_RCC_PLLQ_DIV_10
+ * @arg @ref LL_RCC_PLLQ_DIV_11
+ * @arg @ref LL_RCC_PLLQ_DIV_12
+ * @arg @ref LL_RCC_PLLQ_DIV_13
+ * @arg @ref LL_RCC_PLLQ_DIV_14
+ * @arg @ref LL_RCC_PLLQ_DIV_15
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetQ(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ));
+}
+
+#if defined(RCC_PLLCFGR_PLLR)
+/**
+ * @brief Get Main PLL division factor for PLLR
+ * @note used for PLLCLK (system clock)
+ * @rmtoll PLLCFGR PLLR LL_RCC_PLL_GetR
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLR_DIV_2
+ * @arg @ref LL_RCC_PLLR_DIV_3
+ * @arg @ref LL_RCC_PLLR_DIV_4
+ * @arg @ref LL_RCC_PLLR_DIV_5
+ * @arg @ref LL_RCC_PLLR_DIV_6
+ * @arg @ref LL_RCC_PLLR_DIV_7
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetR(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR));
+}
+#endif /* RCC_PLLCFGR_PLLR */
+
+/**
+ * @brief Get Division factor for the main PLL and other PLL
+ * @rmtoll PLLCFGR PLLM LL_RCC_PLL_GetDivider
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9
+ * @arg @ref LL_RCC_PLLM_DIV_10
+ * @arg @ref LL_RCC_PLLM_DIV_11
+ * @arg @ref LL_RCC_PLLM_DIV_12
+ * @arg @ref LL_RCC_PLLM_DIV_13
+ * @arg @ref LL_RCC_PLLM_DIV_14
+ * @arg @ref LL_RCC_PLLM_DIV_15
+ * @arg @ref LL_RCC_PLLM_DIV_16
+ * @arg @ref LL_RCC_PLLM_DIV_17
+ * @arg @ref LL_RCC_PLLM_DIV_18
+ * @arg @ref LL_RCC_PLLM_DIV_19
+ * @arg @ref LL_RCC_PLLM_DIV_20
+ * @arg @ref LL_RCC_PLLM_DIV_21
+ * @arg @ref LL_RCC_PLLM_DIV_22
+ * @arg @ref LL_RCC_PLLM_DIV_23
+ * @arg @ref LL_RCC_PLLM_DIV_24
+ * @arg @ref LL_RCC_PLLM_DIV_25
+ * @arg @ref LL_RCC_PLLM_DIV_26
+ * @arg @ref LL_RCC_PLLM_DIV_27
+ * @arg @ref LL_RCC_PLLM_DIV_28
+ * @arg @ref LL_RCC_PLLM_DIV_29
+ * @arg @ref LL_RCC_PLLM_DIV_30
+ * @arg @ref LL_RCC_PLLM_DIV_31
+ * @arg @ref LL_RCC_PLLM_DIV_32
+ * @arg @ref LL_RCC_PLLM_DIV_33
+ * @arg @ref LL_RCC_PLLM_DIV_34
+ * @arg @ref LL_RCC_PLLM_DIV_35
+ * @arg @ref LL_RCC_PLLM_DIV_36
+ * @arg @ref LL_RCC_PLLM_DIV_37
+ * @arg @ref LL_RCC_PLLM_DIV_38
+ * @arg @ref LL_RCC_PLLM_DIV_39
+ * @arg @ref LL_RCC_PLLM_DIV_40
+ * @arg @ref LL_RCC_PLLM_DIV_41
+ * @arg @ref LL_RCC_PLLM_DIV_42
+ * @arg @ref LL_RCC_PLLM_DIV_43
+ * @arg @ref LL_RCC_PLLM_DIV_44
+ * @arg @ref LL_RCC_PLLM_DIV_45
+ * @arg @ref LL_RCC_PLLM_DIV_46
+ * @arg @ref LL_RCC_PLLM_DIV_47
+ * @arg @ref LL_RCC_PLLM_DIV_48
+ * @arg @ref LL_RCC_PLLM_DIV_49
+ * @arg @ref LL_RCC_PLLM_DIV_50
+ * @arg @ref LL_RCC_PLLM_DIV_51
+ * @arg @ref LL_RCC_PLLM_DIV_52
+ * @arg @ref LL_RCC_PLLM_DIV_53
+ * @arg @ref LL_RCC_PLLM_DIV_54
+ * @arg @ref LL_RCC_PLLM_DIV_55
+ * @arg @ref LL_RCC_PLLM_DIV_56
+ * @arg @ref LL_RCC_PLLM_DIV_57
+ * @arg @ref LL_RCC_PLLM_DIV_58
+ * @arg @ref LL_RCC_PLLM_DIV_59
+ * @arg @ref LL_RCC_PLLM_DIV_60
+ * @arg @ref LL_RCC_PLLM_DIV_61
+ * @arg @ref LL_RCC_PLLM_DIV_62
+ * @arg @ref LL_RCC_PLLM_DIV_63
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetDivider(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM));
+}
+
+/**
+ * @brief Configure Spread Spectrum used for PLL
+ * @note These bits must be written before enabling PLL
+ * @rmtoll SSCGR MODPER LL_RCC_PLL_ConfigSpreadSpectrum\n
+ * SSCGR INCSTEP LL_RCC_PLL_ConfigSpreadSpectrum\n
+ * SSCGR SPREADSEL LL_RCC_PLL_ConfigSpreadSpectrum
+ * @param Mod Between Min_Data=0 and Max_Data=8191
+ * @param Inc Between Min_Data=0 and Max_Data=32767
+ * @param Sel This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SPREAD_SELECT_CENTER
+ * @arg @ref LL_RCC_SPREAD_SELECT_DOWN
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_ConfigSpreadSpectrum(uint32_t Mod, uint32_t Inc, uint32_t Sel)
+{
+ MODIFY_REG(RCC->SSCGR, RCC_SSCGR_MODPER | RCC_SSCGR_INCSTEP | RCC_SSCGR_SPREADSEL, Mod | (Inc << RCC_SSCGR_INCSTEP_Pos) | Sel);
+}
+
+/**
+ * @brief Get Spread Spectrum Modulation Period for PLL
+ * @rmtoll SSCGR MODPER LL_RCC_PLL_GetPeriodModulation
+ * @retval Between Min_Data=0 and Max_Data=8191
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetPeriodModulation(void)
+{
+ return (uint32_t)(READ_BIT(RCC->SSCGR, RCC_SSCGR_MODPER));
+}
+
+/**
+ * @brief Get Spread Spectrum Incrementation Step for PLL
+ * @note Must be written before enabling PLL
+ * @rmtoll SSCGR INCSTEP LL_RCC_PLL_GetStepIncrementation
+ * @retval Between Min_Data=0 and Max_Data=32767
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetStepIncrementation(void)
+{
+ return (uint32_t)(READ_BIT(RCC->SSCGR, RCC_SSCGR_INCSTEP) >> RCC_SSCGR_INCSTEP_Pos);
+}
+
+/**
+ * @brief Get Spread Spectrum Selection for PLL
+ * @note Must be written before enabling PLL
+ * @rmtoll SSCGR SPREADSEL LL_RCC_PLL_GetSpreadSelection
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_SPREAD_SELECT_CENTER
+ * @arg @ref LL_RCC_SPREAD_SELECT_DOWN
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetSpreadSelection(void)
+{
+ return (uint32_t)(READ_BIT(RCC->SSCGR, RCC_SSCGR_SPREADSEL));
+}
+
+/**
+ * @brief Enable Spread Spectrum for PLL.
+ * @rmtoll SSCGR SSCGEN LL_RCC_PLL_SpreadSpectrum_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_SpreadSpectrum_Enable(void)
+{
+ SET_BIT(RCC->SSCGR, RCC_SSCGR_SSCGEN);
+}
+
+/**
+ * @brief Disable Spread Spectrum for PLL.
+ * @rmtoll SSCGR SSCGEN LL_RCC_PLL_SpreadSpectrum_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_SpreadSpectrum_Disable(void)
+{
+ CLEAR_BIT(RCC->SSCGR, RCC_SSCGR_SSCGEN);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_PLLI2S PLLI2S
+ * @{
+ */
+
+/**
+ * @brief Enable PLLI2S
+ * @rmtoll CR PLLI2SON LL_RCC_PLLI2S_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLI2S_Enable(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_PLLI2SON);
+}
+
+/**
+ * @brief Disable PLLI2S
+ * @rmtoll CR PLLI2SON LL_RCC_PLLI2S_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLI2S_Disable(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_PLLI2SON);
+}
+
+/**
+ * @brief Check if PLLI2S Ready
+ * @rmtoll CR PLLI2SRDY LL_RCC_PLLI2S_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLI2S_IsReady(void)
+{
+ return (READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) == (RCC_CR_PLLI2SRDY));
+}
+
+/**
+ * @brief Configure PLLI2S used for SAI1 and SAI2 domain clock
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLI2S and PLLSAI are disabled
+ * @note PLLN/PLLQ can be written only when PLLI2S is disabled
+ * @note This can be selected for SAI1 and SAI2
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_SAI\n
+ * PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_SAI\n
+ * PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_SAI\n
+ * PLLI2SCFGR PLLI2SQ LL_RCC_PLLI2S_ConfigDomain_SAI\n
+ * DCKCFGR1 PLLI2SDIVQ LL_RCC_PLLI2S_ConfigDomain_SAI
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9
+ * @arg @ref LL_RCC_PLLM_DIV_10
+ * @arg @ref LL_RCC_PLLM_DIV_11
+ * @arg @ref LL_RCC_PLLM_DIV_12
+ * @arg @ref LL_RCC_PLLM_DIV_13
+ * @arg @ref LL_RCC_PLLM_DIV_14
+ * @arg @ref LL_RCC_PLLM_DIV_15
+ * @arg @ref LL_RCC_PLLM_DIV_16
+ * @arg @ref LL_RCC_PLLM_DIV_17
+ * @arg @ref LL_RCC_PLLM_DIV_18
+ * @arg @ref LL_RCC_PLLM_DIV_19
+ * @arg @ref LL_RCC_PLLM_DIV_20
+ * @arg @ref LL_RCC_PLLM_DIV_21
+ * @arg @ref LL_RCC_PLLM_DIV_22
+ * @arg @ref LL_RCC_PLLM_DIV_23
+ * @arg @ref LL_RCC_PLLM_DIV_24
+ * @arg @ref LL_RCC_PLLM_DIV_25
+ * @arg @ref LL_RCC_PLLM_DIV_26
+ * @arg @ref LL_RCC_PLLM_DIV_27
+ * @arg @ref LL_RCC_PLLM_DIV_28
+ * @arg @ref LL_RCC_PLLM_DIV_29
+ * @arg @ref LL_RCC_PLLM_DIV_30
+ * @arg @ref LL_RCC_PLLM_DIV_31
+ * @arg @ref LL_RCC_PLLM_DIV_32
+ * @arg @ref LL_RCC_PLLM_DIV_33
+ * @arg @ref LL_RCC_PLLM_DIV_34
+ * @arg @ref LL_RCC_PLLM_DIV_35
+ * @arg @ref LL_RCC_PLLM_DIV_36
+ * @arg @ref LL_RCC_PLLM_DIV_37
+ * @arg @ref LL_RCC_PLLM_DIV_38
+ * @arg @ref LL_RCC_PLLM_DIV_39
+ * @arg @ref LL_RCC_PLLM_DIV_40
+ * @arg @ref LL_RCC_PLLM_DIV_41
+ * @arg @ref LL_RCC_PLLM_DIV_42
+ * @arg @ref LL_RCC_PLLM_DIV_43
+ * @arg @ref LL_RCC_PLLM_DIV_44
+ * @arg @ref LL_RCC_PLLM_DIV_45
+ * @arg @ref LL_RCC_PLLM_DIV_46
+ * @arg @ref LL_RCC_PLLM_DIV_47
+ * @arg @ref LL_RCC_PLLM_DIV_48
+ * @arg @ref LL_RCC_PLLM_DIV_49
+ * @arg @ref LL_RCC_PLLM_DIV_50
+ * @arg @ref LL_RCC_PLLM_DIV_51
+ * @arg @ref LL_RCC_PLLM_DIV_52
+ * @arg @ref LL_RCC_PLLM_DIV_53
+ * @arg @ref LL_RCC_PLLM_DIV_54
+ * @arg @ref LL_RCC_PLLM_DIV_55
+ * @arg @ref LL_RCC_PLLM_DIV_56
+ * @arg @ref LL_RCC_PLLM_DIV_57
+ * @arg @ref LL_RCC_PLLM_DIV_58
+ * @arg @ref LL_RCC_PLLM_DIV_59
+ * @arg @ref LL_RCC_PLLM_DIV_60
+ * @arg @ref LL_RCC_PLLM_DIV_61
+ * @arg @ref LL_RCC_PLLM_DIV_62
+ * @arg @ref LL_RCC_PLLM_DIV_63
+ * @param PLLN Between 50 and 432
+ * @param PLLQ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_2
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_3
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_4
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_5
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_6
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_7
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_8
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_9
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_10
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_11
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_12
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_13
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_14
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_15
+ * @param PLLDIVQ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_1
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_2
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_3
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_4
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_5
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_6
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_7
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_8
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_9
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_10
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_11
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_12
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_13
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_14
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_15
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_16
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_17
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_18
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_19
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_20
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_21
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_22
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_23
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_24
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_25
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_26
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_27
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_28
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_29
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_30
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_31
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_32
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ, uint32_t PLLDIVQ)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
+ MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN | RCC_PLLI2SCFGR_PLLI2SQ, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos | PLLQ);
+ MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLI2SDIVQ, PLLDIVQ);
+}
+
+#if defined(SPDIFRX)
+/**
+ * @brief Configure PLLI2S used for SPDIFRX domain clock
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLI2S and PLLSAI are disabled
+ * @note PLLN/PLLP can be written only when PLLI2S is disabled
+ * @note This can be selected for SPDIFRX
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n
+ * PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n
+ * PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n
+ * PLLI2SCFGR PLLI2SP LL_RCC_PLLI2S_ConfigDomain_SPDIFRX
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9
+ * @arg @ref LL_RCC_PLLM_DIV_10
+ * @arg @ref LL_RCC_PLLM_DIV_11
+ * @arg @ref LL_RCC_PLLM_DIV_12
+ * @arg @ref LL_RCC_PLLM_DIV_13
+ * @arg @ref LL_RCC_PLLM_DIV_14
+ * @arg @ref LL_RCC_PLLM_DIV_15
+ * @arg @ref LL_RCC_PLLM_DIV_16
+ * @arg @ref LL_RCC_PLLM_DIV_17
+ * @arg @ref LL_RCC_PLLM_DIV_18
+ * @arg @ref LL_RCC_PLLM_DIV_19
+ * @arg @ref LL_RCC_PLLM_DIV_20
+ * @arg @ref LL_RCC_PLLM_DIV_21
+ * @arg @ref LL_RCC_PLLM_DIV_22
+ * @arg @ref LL_RCC_PLLM_DIV_23
+ * @arg @ref LL_RCC_PLLM_DIV_24
+ * @arg @ref LL_RCC_PLLM_DIV_25
+ * @arg @ref LL_RCC_PLLM_DIV_26
+ * @arg @ref LL_RCC_PLLM_DIV_27
+ * @arg @ref LL_RCC_PLLM_DIV_28
+ * @arg @ref LL_RCC_PLLM_DIV_29
+ * @arg @ref LL_RCC_PLLM_DIV_30
+ * @arg @ref LL_RCC_PLLM_DIV_31
+ * @arg @ref LL_RCC_PLLM_DIV_32
+ * @arg @ref LL_RCC_PLLM_DIV_33
+ * @arg @ref LL_RCC_PLLM_DIV_34
+ * @arg @ref LL_RCC_PLLM_DIV_35
+ * @arg @ref LL_RCC_PLLM_DIV_36
+ * @arg @ref LL_RCC_PLLM_DIV_37
+ * @arg @ref LL_RCC_PLLM_DIV_38
+ * @arg @ref LL_RCC_PLLM_DIV_39
+ * @arg @ref LL_RCC_PLLM_DIV_40
+ * @arg @ref LL_RCC_PLLM_DIV_41
+ * @arg @ref LL_RCC_PLLM_DIV_42
+ * @arg @ref LL_RCC_PLLM_DIV_43
+ * @arg @ref LL_RCC_PLLM_DIV_44
+ * @arg @ref LL_RCC_PLLM_DIV_45
+ * @arg @ref LL_RCC_PLLM_DIV_46
+ * @arg @ref LL_RCC_PLLM_DIV_47
+ * @arg @ref LL_RCC_PLLM_DIV_48
+ * @arg @ref LL_RCC_PLLM_DIV_49
+ * @arg @ref LL_RCC_PLLM_DIV_50
+ * @arg @ref LL_RCC_PLLM_DIV_51
+ * @arg @ref LL_RCC_PLLM_DIV_52
+ * @arg @ref LL_RCC_PLLM_DIV_53
+ * @arg @ref LL_RCC_PLLM_DIV_54
+ * @arg @ref LL_RCC_PLLM_DIV_55
+ * @arg @ref LL_RCC_PLLM_DIV_56
+ * @arg @ref LL_RCC_PLLM_DIV_57
+ * @arg @ref LL_RCC_PLLM_DIV_58
+ * @arg @ref LL_RCC_PLLM_DIV_59
+ * @arg @ref LL_RCC_PLLM_DIV_60
+ * @arg @ref LL_RCC_PLLM_DIV_61
+ * @arg @ref LL_RCC_PLLM_DIV_62
+ * @arg @ref LL_RCC_PLLM_DIV_63
+ * @param PLLN Between 50 and 432
+ * @param PLLP This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLI2SP_DIV_2
+ * @arg @ref LL_RCC_PLLI2SP_DIV_4
+ * @arg @ref LL_RCC_PLLI2SP_DIV_6
+ * @arg @ref LL_RCC_PLLI2SP_DIV_8
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_SPDIFRX(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
+ MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN | RCC_PLLI2SCFGR_PLLI2SP, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos | PLLP);
+}
+#endif /* SPDIFRX */
+
+/**
+ * @brief Configure PLLI2S used for I2S1 domain clock
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLI2S and PLLSAI are disabled
+ * @note PLLN/PLLR can be written only when PLLI2S is disabled
+ * @note This can be selected for I2S
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_I2S\n
+ * PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_I2S\n
+ * PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_I2S\n
+ * PLLI2SCFGR PLLI2SR LL_RCC_PLLI2S_ConfigDomain_I2S
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9
+ * @arg @ref LL_RCC_PLLM_DIV_10
+ * @arg @ref LL_RCC_PLLM_DIV_11
+ * @arg @ref LL_RCC_PLLM_DIV_12
+ * @arg @ref LL_RCC_PLLM_DIV_13
+ * @arg @ref LL_RCC_PLLM_DIV_14
+ * @arg @ref LL_RCC_PLLM_DIV_15
+ * @arg @ref LL_RCC_PLLM_DIV_16
+ * @arg @ref LL_RCC_PLLM_DIV_17
+ * @arg @ref LL_RCC_PLLM_DIV_18
+ * @arg @ref LL_RCC_PLLM_DIV_19
+ * @arg @ref LL_RCC_PLLM_DIV_20
+ * @arg @ref LL_RCC_PLLM_DIV_21
+ * @arg @ref LL_RCC_PLLM_DIV_22
+ * @arg @ref LL_RCC_PLLM_DIV_23
+ * @arg @ref LL_RCC_PLLM_DIV_24
+ * @arg @ref LL_RCC_PLLM_DIV_25
+ * @arg @ref LL_RCC_PLLM_DIV_26
+ * @arg @ref LL_RCC_PLLM_DIV_27
+ * @arg @ref LL_RCC_PLLM_DIV_28
+ * @arg @ref LL_RCC_PLLM_DIV_29
+ * @arg @ref LL_RCC_PLLM_DIV_30
+ * @arg @ref LL_RCC_PLLM_DIV_31
+ * @arg @ref LL_RCC_PLLM_DIV_32
+ * @arg @ref LL_RCC_PLLM_DIV_33
+ * @arg @ref LL_RCC_PLLM_DIV_34
+ * @arg @ref LL_RCC_PLLM_DIV_35
+ * @arg @ref LL_RCC_PLLM_DIV_36
+ * @arg @ref LL_RCC_PLLM_DIV_37
+ * @arg @ref LL_RCC_PLLM_DIV_38
+ * @arg @ref LL_RCC_PLLM_DIV_39
+ * @arg @ref LL_RCC_PLLM_DIV_40
+ * @arg @ref LL_RCC_PLLM_DIV_41
+ * @arg @ref LL_RCC_PLLM_DIV_42
+ * @arg @ref LL_RCC_PLLM_DIV_43
+ * @arg @ref LL_RCC_PLLM_DIV_44
+ * @arg @ref LL_RCC_PLLM_DIV_45
+ * @arg @ref LL_RCC_PLLM_DIV_46
+ * @arg @ref LL_RCC_PLLM_DIV_47
+ * @arg @ref LL_RCC_PLLM_DIV_48
+ * @arg @ref LL_RCC_PLLM_DIV_49
+ * @arg @ref LL_RCC_PLLM_DIV_50
+ * @arg @ref LL_RCC_PLLM_DIV_51
+ * @arg @ref LL_RCC_PLLM_DIV_52
+ * @arg @ref LL_RCC_PLLM_DIV_53
+ * @arg @ref LL_RCC_PLLM_DIV_54
+ * @arg @ref LL_RCC_PLLM_DIV_55
+ * @arg @ref LL_RCC_PLLM_DIV_56
+ * @arg @ref LL_RCC_PLLM_DIV_57
+ * @arg @ref LL_RCC_PLLM_DIV_58
+ * @arg @ref LL_RCC_PLLM_DIV_59
+ * @arg @ref LL_RCC_PLLM_DIV_60
+ * @arg @ref LL_RCC_PLLM_DIV_61
+ * @arg @ref LL_RCC_PLLM_DIV_62
+ * @arg @ref LL_RCC_PLLM_DIV_63
+ * @param PLLN Between 50 and 432
+ * @param PLLR This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLI2SR_DIV_2
+ * @arg @ref LL_RCC_PLLI2SR_DIV_3
+ * @arg @ref LL_RCC_PLLI2SR_DIV_4
+ * @arg @ref LL_RCC_PLLI2SR_DIV_5
+ * @arg @ref LL_RCC_PLLI2SR_DIV_6
+ * @arg @ref LL_RCC_PLLI2SR_DIV_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_I2S(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
+ MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN | RCC_PLLI2SCFGR_PLLI2SR, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos | PLLR);
+}
+
+/**
+ * @brief Get I2SPLL multiplication factor for VCO
+ * @rmtoll PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_GetN
+ * @retval Between 50 and 432
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetN(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos);
+}
+
+/**
+ * @brief Get I2SPLL division factor for PLLI2SQ
+ * @rmtoll PLLI2SCFGR PLLI2SQ LL_RCC_PLLI2S_GetQ
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_2
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_3
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_4
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_5
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_6
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_7
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_8
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_9
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_10
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_11
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_12
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_13
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_14
+ * @arg @ref LL_RCC_PLLI2SQ_DIV_15
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetQ(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SQ));
+}
+
+/**
+ * @brief Get I2SPLL division factor for PLLI2SR
+ * @note used for PLLI2SCLK (I2S clock)
+ * @rmtoll PLLI2SCFGR PLLI2SR LL_RCC_PLLI2S_GetR
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLI2SR_DIV_2
+ * @arg @ref LL_RCC_PLLI2SR_DIV_3
+ * @arg @ref LL_RCC_PLLI2SR_DIV_4
+ * @arg @ref LL_RCC_PLLI2SR_DIV_5
+ * @arg @ref LL_RCC_PLLI2SR_DIV_6
+ * @arg @ref LL_RCC_PLLI2SR_DIV_7
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetR(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SR));
+}
+
+#if defined(RCC_PLLI2SCFGR_PLLI2SP)
+/**
+ * @brief Get I2SPLL division factor for PLLI2SP
+ * @note used for PLLSPDIFRXCLK (SPDIFRX clock)
+ * @rmtoll PLLI2SCFGR PLLI2SP LL_RCC_PLLI2S_GetP
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLI2SP_DIV_2
+ * @arg @ref LL_RCC_PLLI2SP_DIV_4
+ * @arg @ref LL_RCC_PLLI2SP_DIV_6
+ * @arg @ref LL_RCC_PLLI2SP_DIV_8
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetP(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SP));
+}
+#endif /* RCC_PLLI2SCFGR_PLLI2SP */
+
+/**
+ * @brief Get I2SPLL division factor for PLLI2SDIVQ
+ * @note used PLLSAI1CLK, PLLSAI2CLK selected (SAI1 and SAI2 clock)
+ * @rmtoll DCKCFGR1 PLLI2SDIVQ LL_RCC_PLLI2S_GetDIVQ
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_1
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_2
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_3
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_4
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_5
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_6
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_7
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_8
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_9
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_10
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_11
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_12
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_13
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_14
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_15
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_16
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_17
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_18
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_19
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_20
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_21
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_22
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_23
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_24
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_25
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_26
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_27
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_28
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_29
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_30
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_31
+ * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_32
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetDIVQ(void)
+{
+ return (uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLI2SDIVQ));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_PLLSAI PLLSAI
+ * @{
+ */
+
+/**
+ * @brief Enable PLLSAI
+ * @rmtoll CR PLLSAION LL_RCC_PLLSAI_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI_Enable(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_PLLSAION);
+}
+
+/**
+ * @brief Disable PLLSAI
+ * @rmtoll CR PLLSAION LL_RCC_PLLSAI_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI_Disable(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_PLLSAION);
+}
+
+/**
+ * @brief Check if PLLSAI Ready
+ * @rmtoll CR PLLSAIRDY LL_RCC_PLLSAI_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI_IsReady(void)
+{
+ return (READ_BIT(RCC->CR, RCC_CR_PLLSAIRDY) == (RCC_CR_PLLSAIRDY));
+}
+
+/**
+ * @brief Configure PLLSAI used for SAI1 and SAI2 domain clock
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLI2S and PLLSAI are disabled
+ * @note PLLN/PLLQ can be written only when PLLSAI is disabled
+ * @note This can be selected for SAI1 and SAI2
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI_ConfigDomain_SAI\n
+ * PLLCFGR PLLM LL_RCC_PLLSAI_ConfigDomain_SAI\n
+ * PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_ConfigDomain_SAI\n
+ * PLLSAICFGR PLLSAIQ LL_RCC_PLLSAI_ConfigDomain_SAI\n
+ * DCKCFGR1 PLLSAIDIVQ LL_RCC_PLLSAI_ConfigDomain_SAI
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9
+ * @arg @ref LL_RCC_PLLM_DIV_10
+ * @arg @ref LL_RCC_PLLM_DIV_11
+ * @arg @ref LL_RCC_PLLM_DIV_12
+ * @arg @ref LL_RCC_PLLM_DIV_13
+ * @arg @ref LL_RCC_PLLM_DIV_14
+ * @arg @ref LL_RCC_PLLM_DIV_15
+ * @arg @ref LL_RCC_PLLM_DIV_16
+ * @arg @ref LL_RCC_PLLM_DIV_17
+ * @arg @ref LL_RCC_PLLM_DIV_18
+ * @arg @ref LL_RCC_PLLM_DIV_19
+ * @arg @ref LL_RCC_PLLM_DIV_20
+ * @arg @ref LL_RCC_PLLM_DIV_21
+ * @arg @ref LL_RCC_PLLM_DIV_22
+ * @arg @ref LL_RCC_PLLM_DIV_23
+ * @arg @ref LL_RCC_PLLM_DIV_24
+ * @arg @ref LL_RCC_PLLM_DIV_25
+ * @arg @ref LL_RCC_PLLM_DIV_26
+ * @arg @ref LL_RCC_PLLM_DIV_27
+ * @arg @ref LL_RCC_PLLM_DIV_28
+ * @arg @ref LL_RCC_PLLM_DIV_29
+ * @arg @ref LL_RCC_PLLM_DIV_30
+ * @arg @ref LL_RCC_PLLM_DIV_31
+ * @arg @ref LL_RCC_PLLM_DIV_32
+ * @arg @ref LL_RCC_PLLM_DIV_33
+ * @arg @ref LL_RCC_PLLM_DIV_34
+ * @arg @ref LL_RCC_PLLM_DIV_35
+ * @arg @ref LL_RCC_PLLM_DIV_36
+ * @arg @ref LL_RCC_PLLM_DIV_37
+ * @arg @ref LL_RCC_PLLM_DIV_38
+ * @arg @ref LL_RCC_PLLM_DIV_39
+ * @arg @ref LL_RCC_PLLM_DIV_40
+ * @arg @ref LL_RCC_PLLM_DIV_41
+ * @arg @ref LL_RCC_PLLM_DIV_42
+ * @arg @ref LL_RCC_PLLM_DIV_43
+ * @arg @ref LL_RCC_PLLM_DIV_44
+ * @arg @ref LL_RCC_PLLM_DIV_45
+ * @arg @ref LL_RCC_PLLM_DIV_46
+ * @arg @ref LL_RCC_PLLM_DIV_47
+ * @arg @ref LL_RCC_PLLM_DIV_48
+ * @arg @ref LL_RCC_PLLM_DIV_49
+ * @arg @ref LL_RCC_PLLM_DIV_50
+ * @arg @ref LL_RCC_PLLM_DIV_51
+ * @arg @ref LL_RCC_PLLM_DIV_52
+ * @arg @ref LL_RCC_PLLM_DIV_53
+ * @arg @ref LL_RCC_PLLM_DIV_54
+ * @arg @ref LL_RCC_PLLM_DIV_55
+ * @arg @ref LL_RCC_PLLM_DIV_56
+ * @arg @ref LL_RCC_PLLM_DIV_57
+ * @arg @ref LL_RCC_PLLM_DIV_58
+ * @arg @ref LL_RCC_PLLM_DIV_59
+ * @arg @ref LL_RCC_PLLM_DIV_60
+ * @arg @ref LL_RCC_PLLM_DIV_61
+ * @arg @ref LL_RCC_PLLM_DIV_62
+ * @arg @ref LL_RCC_PLLM_DIV_63
+ * @param PLLN Between 50 and 432
+ * @param PLLQ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_2
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_3
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_4
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_5
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_6
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_7
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_8
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_9
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_10
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_11
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_12
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_13
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_14
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_15
+ * @param PLLDIVQ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_1
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_2
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_3
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_4
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_5
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_6
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_7
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_8
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_9
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_10
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_11
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_12
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_13
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_14
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_15
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_16
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_17
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_18
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_19
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_20
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_21
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_22
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_23
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_24
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_25
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_26
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_27
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_28
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_29
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_30
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_31
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_32
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ, uint32_t PLLDIVQ)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
+ MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN | RCC_PLLSAICFGR_PLLSAIQ, PLLN << RCC_PLLSAICFGR_PLLSAIN_Pos | PLLQ);
+ MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLSAIDIVQ, PLLDIVQ);
+}
+
+/**
+ * @brief Configure PLLSAI used for 48Mhz domain clock
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLI2S and PLLSAI are disabled
+ * @note PLLN/PLLP can be written only when PLLSAI is disabled
+ * @note This can be selected for USB, RNG, SDMMC1
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI_ConfigDomain_48M\n
+ * PLLCFGR PLLM LL_RCC_PLLSAI_ConfigDomain_48M\n
+ * PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_ConfigDomain_48M\n
+ * PLLSAICFGR PLLSAIP LL_RCC_PLLSAI_ConfigDomain_48M
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9
+ * @arg @ref LL_RCC_PLLM_DIV_10
+ * @arg @ref LL_RCC_PLLM_DIV_11
+ * @arg @ref LL_RCC_PLLM_DIV_12
+ * @arg @ref LL_RCC_PLLM_DIV_13
+ * @arg @ref LL_RCC_PLLM_DIV_14
+ * @arg @ref LL_RCC_PLLM_DIV_15
+ * @arg @ref LL_RCC_PLLM_DIV_16
+ * @arg @ref LL_RCC_PLLM_DIV_17
+ * @arg @ref LL_RCC_PLLM_DIV_18
+ * @arg @ref LL_RCC_PLLM_DIV_19
+ * @arg @ref LL_RCC_PLLM_DIV_20
+ * @arg @ref LL_RCC_PLLM_DIV_21
+ * @arg @ref LL_RCC_PLLM_DIV_22
+ * @arg @ref LL_RCC_PLLM_DIV_23
+ * @arg @ref LL_RCC_PLLM_DIV_24
+ * @arg @ref LL_RCC_PLLM_DIV_25
+ * @arg @ref LL_RCC_PLLM_DIV_26
+ * @arg @ref LL_RCC_PLLM_DIV_27
+ * @arg @ref LL_RCC_PLLM_DIV_28
+ * @arg @ref LL_RCC_PLLM_DIV_29
+ * @arg @ref LL_RCC_PLLM_DIV_30
+ * @arg @ref LL_RCC_PLLM_DIV_31
+ * @arg @ref LL_RCC_PLLM_DIV_32
+ * @arg @ref LL_RCC_PLLM_DIV_33
+ * @arg @ref LL_RCC_PLLM_DIV_34
+ * @arg @ref LL_RCC_PLLM_DIV_35
+ * @arg @ref LL_RCC_PLLM_DIV_36
+ * @arg @ref LL_RCC_PLLM_DIV_37
+ * @arg @ref LL_RCC_PLLM_DIV_38
+ * @arg @ref LL_RCC_PLLM_DIV_39
+ * @arg @ref LL_RCC_PLLM_DIV_40
+ * @arg @ref LL_RCC_PLLM_DIV_41
+ * @arg @ref LL_RCC_PLLM_DIV_42
+ * @arg @ref LL_RCC_PLLM_DIV_43
+ * @arg @ref LL_RCC_PLLM_DIV_44
+ * @arg @ref LL_RCC_PLLM_DIV_45
+ * @arg @ref LL_RCC_PLLM_DIV_46
+ * @arg @ref LL_RCC_PLLM_DIV_47
+ * @arg @ref LL_RCC_PLLM_DIV_48
+ * @arg @ref LL_RCC_PLLM_DIV_49
+ * @arg @ref LL_RCC_PLLM_DIV_50
+ * @arg @ref LL_RCC_PLLM_DIV_51
+ * @arg @ref LL_RCC_PLLM_DIV_52
+ * @arg @ref LL_RCC_PLLM_DIV_53
+ * @arg @ref LL_RCC_PLLM_DIV_54
+ * @arg @ref LL_RCC_PLLM_DIV_55
+ * @arg @ref LL_RCC_PLLM_DIV_56
+ * @arg @ref LL_RCC_PLLM_DIV_57
+ * @arg @ref LL_RCC_PLLM_DIV_58
+ * @arg @ref LL_RCC_PLLM_DIV_59
+ * @arg @ref LL_RCC_PLLM_DIV_60
+ * @arg @ref LL_RCC_PLLM_DIV_61
+ * @arg @ref LL_RCC_PLLM_DIV_62
+ * @arg @ref LL_RCC_PLLM_DIV_63
+ * @param PLLN Between 50 and 432
+ * @param PLLP This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAIP_DIV_2
+ * @arg @ref LL_RCC_PLLSAIP_DIV_4
+ * @arg @ref LL_RCC_PLLSAIP_DIV_6
+ * @arg @ref LL_RCC_PLLSAIP_DIV_8
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
+ MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN | RCC_PLLSAICFGR_PLLSAIP, PLLN << RCC_PLLSAICFGR_PLLSAIN_Pos | PLLP);
+}
+
+#if defined(LTDC)
+/**
+ * @brief Configure PLLSAI used for LTDC domain clock
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLI2S and PLLSAI are disabled
+ * @note PLLN/PLLR can be written only when PLLSAI is disabled
+ * @note This can be selected for LTDC
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI_ConfigDomain_LTDC\n
+ * PLLCFGR PLLM LL_RCC_PLLSAI_ConfigDomain_LTDC\n
+ * PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_ConfigDomain_LTDC\n
+ * PLLSAICFGR PLLSAIR LL_RCC_PLLSAI_ConfigDomain_LTDC\n
+ * DCKCFGR1 PLLSAIDIVR LL_RCC_PLLSAI_ConfigDomain_LTDC
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9
+ * @arg @ref LL_RCC_PLLM_DIV_10
+ * @arg @ref LL_RCC_PLLM_DIV_11
+ * @arg @ref LL_RCC_PLLM_DIV_12
+ * @arg @ref LL_RCC_PLLM_DIV_13
+ * @arg @ref LL_RCC_PLLM_DIV_14
+ * @arg @ref LL_RCC_PLLM_DIV_15
+ * @arg @ref LL_RCC_PLLM_DIV_16
+ * @arg @ref LL_RCC_PLLM_DIV_17
+ * @arg @ref LL_RCC_PLLM_DIV_18
+ * @arg @ref LL_RCC_PLLM_DIV_19
+ * @arg @ref LL_RCC_PLLM_DIV_20
+ * @arg @ref LL_RCC_PLLM_DIV_21
+ * @arg @ref LL_RCC_PLLM_DIV_22
+ * @arg @ref LL_RCC_PLLM_DIV_23
+ * @arg @ref LL_RCC_PLLM_DIV_24
+ * @arg @ref LL_RCC_PLLM_DIV_25
+ * @arg @ref LL_RCC_PLLM_DIV_26
+ * @arg @ref LL_RCC_PLLM_DIV_27
+ * @arg @ref LL_RCC_PLLM_DIV_28
+ * @arg @ref LL_RCC_PLLM_DIV_29
+ * @arg @ref LL_RCC_PLLM_DIV_30
+ * @arg @ref LL_RCC_PLLM_DIV_31
+ * @arg @ref LL_RCC_PLLM_DIV_32
+ * @arg @ref LL_RCC_PLLM_DIV_33
+ * @arg @ref LL_RCC_PLLM_DIV_34
+ * @arg @ref LL_RCC_PLLM_DIV_35
+ * @arg @ref LL_RCC_PLLM_DIV_36
+ * @arg @ref LL_RCC_PLLM_DIV_37
+ * @arg @ref LL_RCC_PLLM_DIV_38
+ * @arg @ref LL_RCC_PLLM_DIV_39
+ * @arg @ref LL_RCC_PLLM_DIV_40
+ * @arg @ref LL_RCC_PLLM_DIV_41
+ * @arg @ref LL_RCC_PLLM_DIV_42
+ * @arg @ref LL_RCC_PLLM_DIV_43
+ * @arg @ref LL_RCC_PLLM_DIV_44
+ * @arg @ref LL_RCC_PLLM_DIV_45
+ * @arg @ref LL_RCC_PLLM_DIV_46
+ * @arg @ref LL_RCC_PLLM_DIV_47
+ * @arg @ref LL_RCC_PLLM_DIV_48
+ * @arg @ref LL_RCC_PLLM_DIV_49
+ * @arg @ref LL_RCC_PLLM_DIV_50
+ * @arg @ref LL_RCC_PLLM_DIV_51
+ * @arg @ref LL_RCC_PLLM_DIV_52
+ * @arg @ref LL_RCC_PLLM_DIV_53
+ * @arg @ref LL_RCC_PLLM_DIV_54
+ * @arg @ref LL_RCC_PLLM_DIV_55
+ * @arg @ref LL_RCC_PLLM_DIV_56
+ * @arg @ref LL_RCC_PLLM_DIV_57
+ * @arg @ref LL_RCC_PLLM_DIV_58
+ * @arg @ref LL_RCC_PLLM_DIV_59
+ * @arg @ref LL_RCC_PLLM_DIV_60
+ * @arg @ref LL_RCC_PLLM_DIV_61
+ * @arg @ref LL_RCC_PLLM_DIV_62
+ * @arg @ref LL_RCC_PLLM_DIV_63
+ * @param PLLN Between 50 and 432
+ * @param PLLR This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAIR_DIV_2
+ * @arg @ref LL_RCC_PLLSAIR_DIV_3
+ * @arg @ref LL_RCC_PLLSAIR_DIV_4
+ * @arg @ref LL_RCC_PLLSAIR_DIV_5
+ * @arg @ref LL_RCC_PLLSAIR_DIV_6
+ * @arg @ref LL_RCC_PLLSAIR_DIV_7
+ * @param PLLDIVR This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAIDIVR_DIV_2
+ * @arg @ref LL_RCC_PLLSAIDIVR_DIV_4
+ * @arg @ref LL_RCC_PLLSAIDIVR_DIV_8
+ * @arg @ref LL_RCC_PLLSAIDIVR_DIV_16
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI_ConfigDomain_LTDC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR, uint32_t PLLDIVR)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
+ MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN | RCC_PLLSAICFGR_PLLSAIR, PLLN << RCC_PLLSAICFGR_PLLSAIN_Pos | PLLR);
+ MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLSAIDIVR, PLLDIVR);
+}
+#endif /* LTDC */
+
+/**
+ * @brief Get SAIPLL multiplication factor for VCO
+ * @rmtoll PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_GetN
+ * @retval Between 50 and 432
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetN(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos);
+}
+
+/**
+ * @brief Get SAIPLL division factor for PLLSAIQ
+ * @rmtoll PLLSAICFGR PLLSAIQ LL_RCC_PLLSAI_GetQ
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_2
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_3
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_4
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_5
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_6
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_7
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_8
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_9
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_10
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_11
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_12
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_13
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_14
+ * @arg @ref LL_RCC_PLLSAIQ_DIV_15
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetQ(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIQ));
+}
+
+#if defined(RCC_PLLSAICFGR_PLLSAIR)
+/**
+ * @brief Get SAIPLL division factor for PLLSAIR
+ * @note used for PLLSAICLK (SAI clock)
+ * @rmtoll PLLSAICFGR PLLSAIR LL_RCC_PLLSAI_GetR
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAIR_DIV_2
+ * @arg @ref LL_RCC_PLLSAIR_DIV_3
+ * @arg @ref LL_RCC_PLLSAIR_DIV_4
+ * @arg @ref LL_RCC_PLLSAIR_DIV_5
+ * @arg @ref LL_RCC_PLLSAIR_DIV_6
+ * @arg @ref LL_RCC_PLLSAIR_DIV_7
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetR(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIR));
+}
+#endif /* RCC_PLLSAICFGR_PLLSAIR */
+
+/**
+ * @brief Get SAIPLL division factor for PLLSAIP
+ * @note used for PLL48MCLK (48M domain clock)
+ * @rmtoll PLLSAICFGR PLLSAIP LL_RCC_PLLSAI_GetP
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAIP_DIV_2
+ * @arg @ref LL_RCC_PLLSAIP_DIV_4
+ * @arg @ref LL_RCC_PLLSAIP_DIV_6
+ * @arg @ref LL_RCC_PLLSAIP_DIV_8
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetP(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIP));
+}
+
+/**
+ * @brief Get SAIPLL division factor for PLLSAIDIVQ
+ * @note used PLLSAI1CLK, PLLSAI2CLK selected (SAI1 and SAI2 clock)
+ * @rmtoll DCKCFGR1 PLLSAIDIVQ LL_RCC_PLLSAI_GetDIVQ
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_1
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_2
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_3
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_4
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_5
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_6
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_7
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_8
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_9
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_10
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_11
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_12
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_13
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_14
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_15
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_16
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_17
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_18
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_19
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_20
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_21
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_22
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_23
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_24
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_25
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_26
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_27
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_28
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_29
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_30
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_31
+ * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_32
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetDIVQ(void)
+{
+ return (uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLSAIDIVQ));
+}
+
+#if defined(RCC_DCKCFGR1_PLLSAIDIVR)
+/**
+ * @brief Get SAIPLL division factor for PLLSAIDIVR
+ * @note used for LTDC domain clock
+ * @rmtoll DCKCFGR1 PLLSAIDIVR LL_RCC_PLLSAI_GetDIVR
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAIDIVR_DIV_2
+ * @arg @ref LL_RCC_PLLSAIDIVR_DIV_4
+ * @arg @ref LL_RCC_PLLSAIDIVR_DIV_8
+ * @arg @ref LL_RCC_PLLSAIDIVR_DIV_16
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetDIVR(void)
+{
+ return (uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLSAIDIVR));
+}
+#endif /* RCC_DCKCFGR1_PLLSAIDIVR */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management
+ * @{
+ */
+
+/**
+ * @brief Clear LSI ready interrupt flag
+ * @rmtoll CIR LSIRDYC LL_RCC_ClearFlag_LSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC);
+}
+
+/**
+ * @brief Clear LSE ready interrupt flag
+ * @rmtoll CIR LSERDYC LL_RCC_ClearFlag_LSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_LSERDYC);
+}
+
+/**
+ * @brief Clear HSI ready interrupt flag
+ * @rmtoll CIR HSIRDYC LL_RCC_ClearFlag_HSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_HSIRDYC);
+}
+
+/**
+ * @brief Clear HSE ready interrupt flag
+ * @rmtoll CIR HSERDYC LL_RCC_ClearFlag_HSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_HSERDYC);
+}
+
+/**
+ * @brief Clear PLL ready interrupt flag
+ * @rmtoll CIR PLLRDYC LL_RCC_ClearFlag_PLLRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_PLLRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_PLLRDYC);
+}
+
+/**
+ * @brief Clear PLLI2S ready interrupt flag
+ * @rmtoll CIR PLLI2SRDYC LL_RCC_ClearFlag_PLLI2SRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_PLLI2SRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYC);
+}
+
+/**
+ * @brief Clear PLLSAI ready interrupt flag
+ * @rmtoll CIR PLLSAIRDYC LL_RCC_ClearFlag_PLLSAIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_PLLSAIRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYC);
+}
+
+/**
+ * @brief Clear Clock security system interrupt flag
+ * @rmtoll CIR CSSC LL_RCC_ClearFlag_HSECSS
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_CSSC);
+}
+
+/**
+ * @brief Check if LSI ready interrupt occurred or not
+ * @rmtoll CIR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYF) == (RCC_CIR_LSIRDYF));
+}
+
+/**
+ * @brief Check if LSE ready interrupt occurred or not
+ * @rmtoll CIR LSERDYF LL_RCC_IsActiveFlag_LSERDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYF) == (RCC_CIR_LSERDYF));
+}
+
+/**
+ * @brief Check if HSI ready interrupt occurred or not
+ * @rmtoll CIR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYF) == (RCC_CIR_HSIRDYF));
+}
+
+/**
+ * @brief Check if HSE ready interrupt occurred or not
+ * @rmtoll CIR HSERDYF LL_RCC_IsActiveFlag_HSERDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYF) == (RCC_CIR_HSERDYF));
+}
+
+/**
+ * @brief Check if PLL ready interrupt occurred or not
+ * @rmtoll CIR PLLRDYF LL_RCC_IsActiveFlag_PLLRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYF) == (RCC_CIR_PLLRDYF));
+}
+
+/**
+ * @brief Check if PLLI2S ready interrupt occurred or not
+ * @rmtoll CIR PLLI2SRDYF LL_RCC_IsActiveFlag_PLLI2SRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLI2SRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYF) == (RCC_CIR_PLLI2SRDYF));
+}
+
+/**
+ * @brief Check if PLLSAI ready interrupt occurred or not
+ * @rmtoll CIR PLLSAIRDYF LL_RCC_IsActiveFlag_PLLSAIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLSAIRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYF) == (RCC_CIR_PLLSAIRDYF));
+}
+
+/**
+ * @brief Check if Clock security system interrupt occurred or not
+ * @rmtoll CIR CSSF LL_RCC_IsActiveFlag_HSECSS
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_CSSF) == (RCC_CIR_CSSF));
+}
+
+/**
+ * @brief Check if RCC flag Independent Watchdog reset is set or not.
+ * @rmtoll CSR IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_IWDGRSTF) == (RCC_CSR_IWDGRSTF));
+}
+
+/**
+ * @brief Check if RCC flag Low Power reset is set or not.
+ * @rmtoll CSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_LPWRRSTF) == (RCC_CSR_LPWRRSTF));
+}
+
+/**
+ * @brief Check if RCC flag Pin reset is set or not.
+ * @rmtoll CSR PINRSTF LL_RCC_IsActiveFlag_PINRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_PINRSTF) == (RCC_CSR_PINRSTF));
+}
+
+/**
+ * @brief Check if RCC flag POR/PDR reset is set or not.
+ * @rmtoll CSR PORRSTF LL_RCC_IsActiveFlag_PORRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PORRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_PORRSTF) == (RCC_CSR_PORRSTF));
+}
+
+/**
+ * @brief Check if RCC flag Software reset is set or not.
+ * @rmtoll CSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == (RCC_CSR_SFTRSTF));
+}
+
+/**
+ * @brief Check if RCC flag Window Watchdog reset is set or not.
+ * @rmtoll CSR WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_WWDGRSTF) == (RCC_CSR_WWDGRSTF));
+}
+
+/**
+ * @brief Check if RCC flag BOR reset is set or not.
+ * @rmtoll CSR BORRSTF LL_RCC_IsActiveFlag_BORRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_BORRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_BORRSTF) == (RCC_CSR_BORRSTF));
+}
+
+/**
+ * @brief Set RMVF bit to clear the reset flags.
+ * @rmtoll CSR RMVF LL_RCC_ClearResetFlags
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearResetFlags(void)
+{
+ SET_BIT(RCC->CSR, RCC_CSR_RMVF);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_IT_Management IT Management
+ * @{
+ */
+
+/**
+ * @brief Enable LSI ready interrupt
+ * @rmtoll CIR LSIRDYIE LL_RCC_EnableIT_LSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_LSIRDYIE);
+}
+
+/**
+ * @brief Enable LSE ready interrupt
+ * @rmtoll CIR LSERDYIE LL_RCC_EnableIT_LSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_LSERDYIE);
+}
+
+/**
+ * @brief Enable HSI ready interrupt
+ * @rmtoll CIR HSIRDYIE LL_RCC_EnableIT_HSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_HSIRDYIE);
+}
+
+/**
+ * @brief Enable HSE ready interrupt
+ * @rmtoll CIR HSERDYIE LL_RCC_EnableIT_HSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_HSERDYIE);
+}
+
+/**
+ * @brief Enable PLL ready interrupt
+ * @rmtoll CIR PLLRDYIE LL_RCC_EnableIT_PLLRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_PLLRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_PLLRDYIE);
+}
+
+/**
+ * @brief Enable PLLI2S ready interrupt
+ * @rmtoll CIR PLLI2SRDYIE LL_RCC_EnableIT_PLLI2SRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_PLLI2SRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE);
+}
+
+/**
+ * @brief Enable PLLSAI ready interrupt
+ * @rmtoll CIR PLLSAIRDYIE LL_RCC_EnableIT_PLLSAIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_PLLSAIRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE);
+}
+
+/**
+ * @brief Disable LSI ready interrupt
+ * @rmtoll CIR LSIRDYIE LL_RCC_DisableIT_LSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void)
+{
+ CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE);
+}
+
+/**
+ * @brief Disable LSE ready interrupt
+ * @rmtoll CIR LSERDYIE LL_RCC_DisableIT_LSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void)
+{
+ CLEAR_BIT(RCC->CIR, RCC_CIR_LSERDYIE);
+}
+
+/**
+ * @brief Disable HSI ready interrupt
+ * @rmtoll CIR HSIRDYIE LL_RCC_DisableIT_HSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void)
+{
+ CLEAR_BIT(RCC->CIR, RCC_CIR_HSIRDYIE);
+}
+
+/**
+ * @brief Disable HSE ready interrupt
+ * @rmtoll CIR HSERDYIE LL_RCC_DisableIT_HSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void)
+{
+ CLEAR_BIT(RCC->CIR, RCC_CIR_HSERDYIE);
+}
+
+/**
+ * @brief Disable PLL ready interrupt
+ * @rmtoll CIR PLLRDYIE LL_RCC_DisableIT_PLLRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_PLLRDY(void)
+{
+ CLEAR_BIT(RCC->CIR, RCC_CIR_PLLRDYIE);
+}
+
+/**
+ * @brief Disable PLLI2S ready interrupt
+ * @rmtoll CIR PLLI2SRDYIE LL_RCC_DisableIT_PLLI2SRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_PLLI2SRDY(void)
+{
+ CLEAR_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE);
+}
+
+/**
+ * @brief Disable PLLSAI ready interrupt
+ * @rmtoll CIR PLLSAIRDYIE LL_RCC_DisableIT_PLLSAIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_PLLSAIRDY(void)
+{
+ CLEAR_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE);
+}
+
+/**
+ * @brief Checks if LSI ready interrupt source is enabled or disabled.
+ * @rmtoll CIR LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYIE) == (RCC_CIR_LSIRDYIE));
+}
+
+/**
+ * @brief Checks if LSE ready interrupt source is enabled or disabled.
+ * @rmtoll CIR LSERDYIE LL_RCC_IsEnabledIT_LSERDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYIE) == (RCC_CIR_LSERDYIE));
+}
+
+/**
+ * @brief Checks if HSI ready interrupt source is enabled or disabled.
+ * @rmtoll CIR HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYIE) == (RCC_CIR_HSIRDYIE));
+}
+
+/**
+ * @brief Checks if HSE ready interrupt source is enabled or disabled.
+ * @rmtoll CIR HSERDYIE LL_RCC_IsEnabledIT_HSERDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYIE) == (RCC_CIR_HSERDYIE));
+}
+
+/**
+ * @brief Checks if PLL ready interrupt source is enabled or disabled.
+ * @rmtoll CIR PLLRDYIE LL_RCC_IsEnabledIT_PLLRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYIE) == (RCC_CIR_PLLRDYIE));
+}
+
+/**
+ * @brief Checks if PLLI2S ready interrupt source is enabled or disabled.
+ * @rmtoll CIR PLLI2SRDYIE LL_RCC_IsEnabledIT_PLLI2SRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLI2SRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE) == (RCC_CIR_PLLI2SRDYIE));
+}
+
+/**
+ * @brief Checks if PLLSAI ready interrupt source is enabled or disabled.
+ * @rmtoll CIR PLLSAIRDYIE LL_RCC_IsEnabledIT_PLLSAIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLSAIRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE) == (RCC_CIR_PLLSAIRDYIE));
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RCC_LL_EF_Init De-initialization function
+ * @{
+ */
+ErrorStatus LL_RCC_DeInit(void);
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions
+ * @{
+ */
+void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks);
+uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource);
+uint32_t LL_RCC_GetUARTClockFreq(uint32_t UARTxSource);
+uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource);
+uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource);
+uint32_t LL_RCC_GetSAIClockFreq(uint32_t SAIxSource);
+uint32_t LL_RCC_GetSDMMCClockFreq(uint32_t SDMMCxSource);
+uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource);
+uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource);
+#if defined(DFSDM1_Channel0)
+uint32_t LL_RCC_GetDFSDMClockFreq(uint32_t DFSDMxSource);
+uint32_t LL_RCC_GetDFSDMAudioClockFreq(uint32_t DFSDMxSource);
+#endif /* DFSDM1_Channel0 */
+uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource);
+#if defined(CEC)
+uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource);
+#endif /* CEC */
+#if defined(LTDC)
+uint32_t LL_RCC_GetLTDCClockFreq(uint32_t LTDCxSource);
+#endif /* LTDC */
+#if defined(SPDIFRX)
+uint32_t LL_RCC_GetSPDIFRXClockFreq(uint32_t SPDIFRXxSource);
+#endif /* SPDIFRX */
+#if defined(DSI)
+uint32_t LL_RCC_GetDSIClockFreq(uint32_t DSIxSource);
+#endif /* DSI */
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(RCC) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_LL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h
new file mode 100644
index 00000000..af8934ec
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h
@@ -0,0 +1,1034 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_ll_system.h
+ * @author MCD Application Team
+ * @brief Header file of SYSTEM LL module.
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The LL SYSTEM driver contains a set of generic APIs that can be
+ used by user:
+ (+) Some of the FLASH features need to be handled in the SYSTEM file.
+ (+) Access to DBGCMU registers
+ (+) Access to SYSCFG registers
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_LL_SYSTEM_H
+#define __STM32F7xx_LL_SYSTEM_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx.h"
+
+/** @addtogroup STM32F7xx_LL_Driver
+ * @{
+ */
+
+#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU)
+
+/** @defgroup SYSTEM_LL SYSTEM
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants
+ * @{
+ */
+
+/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP
+* @{
+*/
+#define LL_SYSCFG_REMAP_BOOT0 0x00000000U /*!< Boot information after Reset */
+#define LL_SYSCFG_REMAP_BOOT1 SYSCFG_MEMRMP_MEM_BOOT /*!< Boot information after Reset */
+/**
+ * @}
+ */
+
+
+#if defined(SYSCFG_MEMRMP_SWP_FB)
+/** @defgroup SYSTEM_LL_EC_BANKMODE SYSCFG BANK MODE
+ * @{
+ */
+#define LL_SYSCFG_BANKMODE_BANK1 0x00000000U /*!< Flash Bank 1 base address mapped at 0x0800 0000 (AXI) and 0x0020 0000 (TCM)
+ and Flash Bank 2 base address mapped at 0x0810 0000 (AXI) and 0x0030 0000 (TCM)*/
+
+#define LL_SYSCFG_BANKMODE_BANK2 SYSCFG_MEMRMP_SWP_FB /*!< Flash Bank 2 base address mapped at 0x0800 0000 (AXI) and 0x0020 0000(TCM)
+ and Flash Bank 1 base address mapped at 0x0810 0000 (AXI) and 0x0030 0000(TCM) */
+/**
+ * @}
+ */
+#endif /* SYSCFG_MEMRMP_SWP_FB */
+
+#if defined(SYSCFG_PMC_MII_RMII_SEL)
+ /** @defgroup SYSTEM_LL_EC_PMC SYSCFG PMC
+* @{
+*/
+#define LL_SYSCFG_PMC_ETHMII 0x00000000U /*!< ETH Media MII interface */
+#define LL_SYSCFG_PMC_ETHRMII (uint32_t)SYSCFG_PMC_MII_RMII_SEL /*!< ETH Media RMII interface */
+
+/**
+ * @}
+ */
+#endif /* SYSCFG_PMC_MII_RMII_SEL */
+
+/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS
+ * @{
+ */
+#if defined(SYSCFG_PMC_I2C1_FMP)
+#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 SYSCFG_PMC_I2C1_FMP /*!< Enable Fast Mode Plus for I2C1 */
+#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 SYSCFG_PMC_I2C2_FMP /*!< Enable Fast Mode Plus for I2C2 */
+#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 SYSCFG_PMC_I2C3_FMP /*!< Enable Fast Mode Plus for I2C3 */
+#endif /* SYSCFG_PMC_I2C1_FMP */
+#if defined(SYSCFG_PMC_I2C4_FMP)
+#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C4 SYSCFG_PMC_I2C4_FMP /*!< Enable Fast Mode Plus for I2C4 */
+#endif /* SYSCFG_PMC_I2C4_FMP */
+#if defined(SYSCFG_PMC_I2C_PB6_FMP)
+#define LL_SYSCFG_I2C_FASTMODEPLUS_PB6 SYSCFG_PMC_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */
+#define LL_SYSCFG_I2C_FASTMODEPLUS_PB7 SYSCFG_PMC_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */
+#define LL_SYSCFG_I2C_FASTMODEPLUS_PB8 SYSCFG_PMC_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */
+#define LL_SYSCFG_I2C_FASTMODEPLUS_PB9 SYSCFG_PMC_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */
+#endif /* SYSCFG_PMC_I2C_PB6_FMP */
+/**
+ * @}
+ */
+
+/** @defgroup SYSTEM_LL_EC_EXTI_PORT SYSCFG EXTI PORT
+ * @{
+ */
+#define LL_SYSCFG_EXTI_PORTA 0U /*!< EXTI PORT A */
+#define LL_SYSCFG_EXTI_PORTB 1U /*!< EXTI PORT B */
+#define LL_SYSCFG_EXTI_PORTC 2U /*!< EXTI PORT C */
+#define LL_SYSCFG_EXTI_PORTD 3U /*!< EXTI PORT D */
+#define LL_SYSCFG_EXTI_PORTE 4U /*!< EXTI PORT E */
+#if defined(GPIOF)
+#define LL_SYSCFG_EXTI_PORTF 5U /*!< EXTI PORT F */
+#endif /* GPIOF */
+#if defined(GPIOG)
+#define LL_SYSCFG_EXTI_PORTG 6U /*!< EXTI PORT G */
+#endif /* GPIOG */
+#define LL_SYSCFG_EXTI_PORTH 7U /*!< EXTI PORT H */
+#if defined(GPIOI)
+#define LL_SYSCFG_EXTI_PORTI 8U /*!< EXTI PORT I */
+#endif /* GPIOI */
+#if defined(GPIOJ)
+#define LL_SYSCFG_EXTI_PORTJ 9U /*!< EXTI PORT J */
+#endif /* GPIOJ */
+#if defined(GPIOK)
+#define LL_SYSCFG_EXTI_PORTK 10U /*!< EXTI PORT k */
+#endif /* GPIOK */
+/**
+ * @}
+ */
+
+/** @defgroup SYSTEM_LL_EC_EXTI_LINE SYSCFG EXTI LINE
+ * @{
+ */
+#define LL_SYSCFG_EXTI_LINE0 (0x000FU << 16U | 0U) /*!< EXTI_POSITION_0 | EXTICR[0] */
+#define LL_SYSCFG_EXTI_LINE1 (0x00F0U << 16U | 0U) /*!< EXTI_POSITION_4 | EXTICR[0] */
+#define LL_SYSCFG_EXTI_LINE2 (0x0F00U << 16U | 0U) /*!< EXTI_POSITION_8 | EXTICR[0] */
+#define LL_SYSCFG_EXTI_LINE3 (0xF000U << 16U | 0U) /*!< EXTI_POSITION_12 | EXTICR[0] */
+#define LL_SYSCFG_EXTI_LINE4 (0x000FU << 16U | 1U) /*!< EXTI_POSITION_0 | EXTICR[1] */
+#define LL_SYSCFG_EXTI_LINE5 (0x00F0U << 16U | 1U) /*!< EXTI_POSITION_4 | EXTICR[1] */
+#define LL_SYSCFG_EXTI_LINE6 (0x0F00U << 16U | 1U) /*!< EXTI_POSITION_8 | EXTICR[1] */
+#define LL_SYSCFG_EXTI_LINE7 (0xF000U << 16U | 1U) /*!< EXTI_POSITION_12 | EXTICR[1] */
+#define LL_SYSCFG_EXTI_LINE8 (0x000FU << 16U | 2U) /*!< EXTI_POSITION_0 | EXTICR[2] */
+#define LL_SYSCFG_EXTI_LINE9 (0x00F0U << 16U | 2U) /*!< EXTI_POSITION_4 | EXTICR[2] */
+#define LL_SYSCFG_EXTI_LINE10 (0x0F00U << 16U | 2U) /*!< EXTI_POSITION_8 | EXTICR[2] */
+#define LL_SYSCFG_EXTI_LINE11 (0xF000U << 16U | 2U) /*!< EXTI_POSITION_12 | EXTICR[2] */
+#define LL_SYSCFG_EXTI_LINE12 (0x000FU << 16U | 3U) /*!< EXTI_POSITION_0 | EXTICR[3] */
+#define LL_SYSCFG_EXTI_LINE13 (0x00F0U << 16U | 3U) /*!< EXTI_POSITION_4 | EXTICR[3] */
+#define LL_SYSCFG_EXTI_LINE14 (0x0F00U << 16U | 3U) /*!< EXTI_POSITION_8 | EXTICR[3] */
+#define LL_SYSCFG_EXTI_LINE15 (0xF000U << 16U | 3U) /*!< EXTI_POSITION_12 | EXTICR[3] */
+/**
+ * @}
+ */
+
+/** @defgroup SYSTEM_LL_EC_TIMBREAK SYSCFG TIMER BREAK
+ * @{
+ */
+#if defined(SYSCFG_CBR_CLL)
+#define LL_SYSCFG_TIMBREAK_LOCKUP SYSCFG_CBR_CLL /*!< Enables and locks the Lockup output (raised during core
+ lockup state) of Cortex-M7 with Break Input of TIMER1, TIMER8 */
+#define LL_SYSCFG_TIMBREAK_PVD SYSCFG_CBR_PVDL /*!< Enables and locks the PVD connection with TIMER1, TIMER8 Break input.
+ It also locks (write protect) the PVD_EN and PVDSEL[2:0] bits
+ of the power controller */
+#endif /* SYSCFG_CBR_CLL */
+/**
+ * @}
+ */
+/** @defgroup SYSTEM_LL_EC_CMP_PD SYSCFG CMP PD
+ * @{
+ */
+#define LL_SYSCFG_DISABLE_CMP_PD 0x00000000U /*!< I/O compensation cell power-down mode */
+#define LL_SYSCFG_ENABLE_CMP_PD SYSCFG_CMPCR_CMP_PD /*!< I/O compensation cell enabled */
+/**
+ * @}
+ */
+
+/** @defgroup SYSTEM_LL_EC_TRACE DBGMCU TRACE Pin Assignment
+ * @{
+ */
+#define LL_DBGMCU_TRACE_NONE 0x00000000U /*!< TRACE pins not assigned (default state) */
+#define LL_DBGMCU_TRACE_ASYNCH DBGMCU_CR_TRACE_IOEN /*!< TRACE pin assignment for Asynchronous Mode */
+#define LL_DBGMCU_TRACE_SYNCH_SIZE1 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_0) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 1 */
+#define LL_DBGMCU_TRACE_SYNCH_SIZE2 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_1) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 2 */
+#define LL_DBGMCU_TRACE_SYNCH_SIZE4 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 4 */
+/**
+ * @}
+ */
+
+/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP
+ * @{
+ */
+#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBGMCU_APB1_FZ_DBG_TIM2_STOP /*!< TIM2 counter stopped when core is halted */
+#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_APB1_FZ_DBG_TIM3_STOP /*!< TIM3 counter stopped when core is halted */
+#define LL_DBGMCU_APB1_GRP1_TIM4_STOP DBGMCU_APB1_FZ_DBG_TIM4_STOP /*!< TIM4 counter stopped when core is halted */
+#define LL_DBGMCU_APB1_GRP1_TIM5_STOP DBGMCU_APB1_FZ_DBG_TIM5_STOP /*!< TIM5 counter stopped when core is halted */
+#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBGMCU_APB1_FZ_DBG_TIM6_STOP /*!< TIM6 counter stopped when core is halted */
+#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBGMCU_APB1_FZ_DBG_TIM7_STOP /*!< TIM7 counter stopped when core is halted */
+#define LL_DBGMCU_APB1_GRP1_TIM12_STOP DBGMCU_APB1_FZ_DBG_TIM12_STOP /*!< TIM12 counter stopped when core is halted */
+#define LL_DBGMCU_APB1_GRP1_TIM13_STOP DBGMCU_APB1_FZ_DBG_TIM13_STOP /*!< TIM13 counter stopped when core is halted */
+#define LL_DBGMCU_APB1_GRP1_TIM14_STOP DBGMCU_APB1_FZ_DBG_TIM14_STOP /*!< TIM14 counter stopped when core is halted */
+#define LL_DBGMCU_APB1_GRP1_LPTIM1_STOP DBGMCU_APB1_FZ_DBG_LPTIM1_STOP /*!< LPTIIM1 counter stopped when core is halted */
+#define LL_DBGMCU_APB1_GRP1_RTC_STOP DBGMCU_APB1_FZ_DBG_RTC_STOP /*!< RTC counter stopped when core is halted */
+#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBGMCU_APB1_FZ_DBG_WWDG_STOP /*!< Debug Window Watchdog stopped when Core is halted */
+#define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBGMCU_APB1_FZ_DBG_IWDG_STOP /*!< Debug Independent Watchdog stopped when Core is halted */
+#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
+#define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT /*!< I2C2 SMBUS timeout mode stopped when Core is halted */
+#define LL_DBGMCU_APB1_GRP1_I2C3_STOP DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT /*!< I2C3 SMBUS timeout mode stopped when Core is halted */
+#if defined(DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT)
+#define LL_DBGMCU_APB1_GRP1_I2C4_STOP DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT /*!< I2C4 SMBUS timeout mode stopped when core is halted */
+#endif /* DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT */
+#define LL_DBGMCU_APB1_GRP1_CAN1_STOP DBGMCU_APB1_FZ_DBG_CAN1_STOP /*!< CAN1 debug stopped when Core is halted */
+#if defined(DBGMCU_APB1_FZ_DBG_CAN2_STOP)
+#define LL_DBGMCU_APB1_GRP1_CAN2_STOP DBGMCU_APB1_FZ_DBG_CAN2_STOP /*!< CAN2 debug stopped when Core is halted */
+#endif /* DBGMCU_APB1_FZ_DBG_CAN2_STOP */
+#if defined(DBGMCU_APB1_FZ_DBG_CAN3_STOP)
+#define LL_DBGMCU_APB1_GRP1_CAN3_STOP DBGMCU_APB1_FZ_DBG_CAN3_STOP /*!< CAN3 debug stopped when Core is halted */
+#endif /*DBGMCU_APB1_FZ_DBG_CAN3_STOP*/
+/**
+ * @}
+ */
+
+/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP
+ * @{
+ */
+#define LL_DBGMCU_APB2_GRP1_TIM1_STOP DBGMCU_APB2_FZ_DBG_TIM1_STOP /*!< TIM1 counter stopped when core is halted */
+#define LL_DBGMCU_APB2_GRP1_TIM8_STOP DBGMCU_APB2_FZ_DBG_TIM8_STOP /*!< TIM8 counter stopped when core is halted */
+#define LL_DBGMCU_APB2_GRP1_TIM9_STOP DBGMCU_APB2_FZ_DBG_TIM9_STOP /*!< TIM9 counter stopped when core is halted */
+#define LL_DBGMCU_APB2_GRP1_TIM10_STOP DBGMCU_APB2_FZ_DBG_TIM10_STOP /*!< TIM10 counter stopped when core is halted */
+#define LL_DBGMCU_APB2_GRP1_TIM11_STOP DBGMCU_APB2_FZ_DBG_TIM11_STOP /*!< TIM11 counter stopped when core is halted */
+/**
+ * @}
+ */
+
+/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY
+ * @{
+ */
+#define LL_FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero wait state */
+#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One wait state */
+#define LL_FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two wait states */
+#define LL_FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three wait states */
+#define LL_FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four wait states */
+#define LL_FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH five wait state */
+#define LL_FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH six wait state */
+#define LL_FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH seven wait states */
+#define LL_FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH eight wait states */
+#define LL_FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH nine wait states */
+#define LL_FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH ten wait states */
+#define LL_FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH eleven wait states */
+#define LL_FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH twelve wait states */
+#define LL_FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH thirteen wait states */
+#define LL_FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH fourteen wait states */
+#define LL_FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH fifteen wait states */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions
+ * @{
+ */
+
+/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG
+ * @{
+ */
+
+/**
+ * @brief Enables the FMC Memory Mapping Swapping
+ * @rmtoll SYSCFG_MEMRMP SWP_FMC LL_SYSCFG_EnableFMCMemorySwapping
+ * @note SDRAM is accessible at 0x60000000 and NOR/RAM
+ * is accessible at 0xC0000000
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_EnableFMCMemorySwapping(void)
+{
+ SET_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FMC_0);
+}
+
+/**
+ * @brief Disables the FMC Memory Mapping Swapping
+ * @rmtoll SYSCFG_MEMRMP SWP_FMC LL_SYSCFG_DisableFMCMemorySwapping
+ * @note SDRAM is accessible at 0xC0000000 (default mapping)
+ * and NOR/RAM is accessible at 0x60000000 (default mapping)
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_DisableFMCMemorySwapping(void)
+{
+ CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FMC);
+}
+
+/**
+ * @brief Enables the Compensation Cell
+ * @rmtoll SYSCFG_CMPCR CMP_PD LL_SYSCFG_EnableCompensationCell
+ * @note The I/O compensation cell can be used only when the device supply
+ * voltage ranges from 2.4 to 3.6 V
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_EnableCompensationCell(void)
+{
+ SET_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_CMP_PD);
+}
+
+/**
+ * @brief Disables the Compensation Cell
+ * @rmtoll SYSCFG_CMPCR CMP_PD LL_SYSCFG_DisableCompensationCell
+ * @note The I/O compensation cell can be used only when the device supply
+ * voltage ranges from 2.4 to 3.6 V
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_DisableCompensationCell(void)
+{
+ CLEAR_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_CMP_PD);
+}
+
+/**
+ * @brief Get Compensation Cell ready Flag
+ * @rmtoll SYSCFG_CMPCR READY LL_SYSCFG_IsActiveFlag_CMPCR
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CMPCR(void)
+{
+ return (READ_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_READY) == (SYSCFG_CMPCR_READY));
+}
+
+
+/**
+ * @brief Get the memory boot mapping as configured by user
+ * @rmtoll SYSCFG_MEMRMP MEM_BOOT LL_SYSCFG_GetRemapMemoryBoot
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SYSCFG_REMAP_BOOT0
+ * @arg @ref LL_SYSCFG_REMAP_BOOT1
+ *
+ * (*) value not defined in all devices
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemoryBoot(void)
+{
+ return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_BOOT));
+}
+
+#if defined(SYSCFG_PMC_MII_RMII_SEL)
+/**
+ * @brief Select Ethernet PHY interface
+ * @rmtoll SYSCFG_PMC MII_RMII_SEL LL_SYSCFG_SetPHYInterface
+ * @param Interface This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_PMC_ETHMII
+ * @arg @ref LL_SYSCFG_PMC_ETHRMII
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetPHYInterface(uint32_t Interface)
+{
+ MODIFY_REG(SYSCFG->PMC, SYSCFG_PMC_MII_RMII_SEL, Interface);
+}
+
+/**
+ * @brief Get Ethernet PHY interface
+ * @rmtoll SYSCFG_PMC MII_RMII_SEL LL_SYSCFG_GetPHYInterface
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SYSCFG_PMC_ETHMII
+ * @arg @ref LL_SYSCFG_PMC_ETHRMII
+ * @retval None
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_GetPHYInterface(void)
+{
+ return (uint32_t)(READ_BIT(SYSCFG->PMC, SYSCFG_PMC_MII_RMII_SEL));
+}
+#endif /* SYSCFG_PMC_MII_RMII_SEL */
+
+
+#if defined(SYSCFG_MEMRMP_SWP_FB)
+/**
+ * @brief Select Flash bank mode (Bank flashed at 0x08000000)
+ * @rmtoll SYSCFG_MEMRMP FB_MODE LL_SYSCFG_SetFlashBankMode
+ * @param Bank This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_BANKMODE_BANK1
+ * @arg @ref LL_SYSCFG_BANKMODE_BANK2
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetFlashBankMode(uint32_t Bank)
+{
+ MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FB, Bank);
+}
+
+/**
+ * @brief Get Flash bank mode (Bank flashed at 0x08000000)
+ * @rmtoll SYSCFG_MEMRMP FB_MODE LL_SYSCFG_GetFlashBankMode
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SYSCFG_BANKMODE_BANK1
+ * @arg @ref LL_SYSCFG_BANKMODE_BANK2
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashBankMode(void)
+{
+ return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FB));
+}
+
+#endif /* SYSCFG_MEMRMP_SWP_FB */
+
+#if defined(SYSCFG_PMC_I2C1_FMP)
+/**
+ * @brief Enable the I2C fast mode plus driving capability.
+ * @rmtoll SYSCFG_PMC I2C_PBx_FMP LL_SYSCFG_EnableFastModePlus\n
+ * SYSCFG_PMC I2Cx_FMP LL_SYSCFG_EnableFastModePlus
+ * @param ConfigFastModePlus This parameter can be a combination of the following values:
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 (*)
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 (*)
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*)
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C4(*)
+ *
+ * (*) value not defined in all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ SET_BIT(SYSCFG->PMC, ConfigFastModePlus);
+}
+
+/**
+ * @brief Disable the I2C fast mode plus driving capability.
+ * @rmtoll SYSCFG_PMC I2C_PBx_FMP LL_SYSCFG_DisableFastModePlus\n
+ * SYSCFG_PMC I2Cx_FMP LL_SYSCFG_DisableFastModePlus
+ * @param ConfigFastModePlus This parameter can be a combination of the following values:
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 (*)
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 (*)
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*)
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C4
+ * (*) value not defined in all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ CLEAR_BIT(SYSCFG->PMC, ConfigFastModePlus);
+}
+#endif /* SYSCFG_PMC_I2C1_FMP */
+
+
+/**
+ * @brief Configure source input for the EXTI external interrupt.
+ * @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTIx LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTIx LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTIx LL_SYSCFG_SetEXTISource
+ * @param Port This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_EXTI_PORTA
+ * @arg @ref LL_SYSCFG_EXTI_PORTB
+ * @arg @ref LL_SYSCFG_EXTI_PORTC
+ * @arg @ref LL_SYSCFG_EXTI_PORTD
+ * @arg @ref LL_SYSCFG_EXTI_PORTE
+ * @arg @ref LL_SYSCFG_EXTI_PORTF
+ * @arg @ref LL_SYSCFG_EXTI_PORTG
+ * @arg @ref LL_SYSCFG_EXTI_PORTH
+ * @arg @ref LL_SYSCFG_EXTI_PORTI
+ * @arg @ref LL_SYSCFG_EXTI_PORTJ
+ * @arg @ref LL_SYSCFG_EXTI_PORTK
+ *
+ * (*) value not defined in all devices
+ * @param Line This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_EXTI_LINE0
+ * @arg @ref LL_SYSCFG_EXTI_LINE1
+ * @arg @ref LL_SYSCFG_EXTI_LINE2
+ * @arg @ref LL_SYSCFG_EXTI_LINE3
+ * @arg @ref LL_SYSCFG_EXTI_LINE4
+ * @arg @ref LL_SYSCFG_EXTI_LINE5
+ * @arg @ref LL_SYSCFG_EXTI_LINE6
+ * @arg @ref LL_SYSCFG_EXTI_LINE7
+ * @arg @ref LL_SYSCFG_EXTI_LINE8
+ * @arg @ref LL_SYSCFG_EXTI_LINE9
+ * @arg @ref LL_SYSCFG_EXTI_LINE10
+ * @arg @ref LL_SYSCFG_EXTI_LINE11
+ * @arg @ref LL_SYSCFG_EXTI_LINE12
+ * @arg @ref LL_SYSCFG_EXTI_LINE13
+ * @arg @ref LL_SYSCFG_EXTI_LINE14
+ * @arg @ref LL_SYSCFG_EXTI_LINE15
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line)
+{
+ MODIFY_REG(SYSCFG->EXTICR[Line & 0xFFU], (Line >> 16U), Port << POSITION_VAL((Line >> 16U)));
+}
+
+/**
+ * @brief Get the configured defined for specific EXTI Line
+ * @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR2 EXTIx LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR3 EXTIx LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR4 EXTIx LL_SYSCFG_GetEXTISource
+ * @param Line This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_EXTI_LINE0
+ * @arg @ref LL_SYSCFG_EXTI_LINE1
+ * @arg @ref LL_SYSCFG_EXTI_LINE2
+ * @arg @ref LL_SYSCFG_EXTI_LINE3
+ * @arg @ref LL_SYSCFG_EXTI_LINE4
+ * @arg @ref LL_SYSCFG_EXTI_LINE5
+ * @arg @ref LL_SYSCFG_EXTI_LINE6
+ * @arg @ref LL_SYSCFG_EXTI_LINE7
+ * @arg @ref LL_SYSCFG_EXTI_LINE8
+ * @arg @ref LL_SYSCFG_EXTI_LINE9
+ * @arg @ref LL_SYSCFG_EXTI_LINE10
+ * @arg @ref LL_SYSCFG_EXTI_LINE11
+ * @arg @ref LL_SYSCFG_EXTI_LINE12
+ * @arg @ref LL_SYSCFG_EXTI_LINE13
+ * @arg @ref LL_SYSCFG_EXTI_LINE14
+ * @arg @ref LL_SYSCFG_EXTI_LINE15
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SYSCFG_EXTI_PORTA
+ * @arg @ref LL_SYSCFG_EXTI_PORTB
+ * @arg @ref LL_SYSCFG_EXTI_PORTC
+ * @arg @ref LL_SYSCFG_EXTI_PORTD
+ * @arg @ref LL_SYSCFG_EXTI_PORTE
+ * @arg @ref LL_SYSCFG_EXTI_PORTF
+ * @arg @ref LL_SYSCFG_EXTI_PORTG
+ * @arg @ref LL_SYSCFG_EXTI_PORTH
+ * @arg @ref LL_SYSCFG_EXTI_PORTI
+ * @arg @ref LL_SYSCFG_EXTI_PORTJ
+ * @arg @ref LL_SYSCFG_EXTI_PORTK
+ * (*) value not defined in all devices
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line)
+{
+ return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0xFFU], (Line >> 16U)) >> POSITION_VAL(Line >> 16U));
+}
+
+#if defined(SYSCFG_CBR_CLL)
+/**
+ * @brief Set connections to TIM1/8/15/16/17 Break inputs
+ * SYSCFG_CBR CLL LL_SYSCFG_SetTIMBreakInputs\n
+ * SYSCFG_CBR PVDL LL_SYSCFG_SetTIMBreakInputs
+ * @param Break This parameter can be a combination of the following values:
+ * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP
+ * @arg @ref LL_SYSCFG_TIMBREAK_PVD
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetTIMBreakInputs(uint32_t Break)
+{
+ MODIFY_REG(SYSCFG->CBR, SYSCFG_CBR_CLL | SYSCFG_CBR_PVDL, Break);
+}
+
+/**
+ * @brief Get connections to TIM1/8/15/16/17 Break inputs
+ * SYSCFG_CBR CLL LL_SYSCFG_GetTIMBreakInputs\n
+ * SYSCFG_CBR PVDL LL_SYSCFG_GetTIMBreakInputs
+ * @retval Returned value can be can be a combination of the following values:
+ * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP
+ * @arg @ref LL_SYSCFG_TIMBREAK_PVD
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_GetTIMBreakInputs(void)
+{
+ return (uint32_t)(READ_BIT(SYSCFG->CBR, SYSCFG_CBR_CLL | SYSCFG_CBR_PVDL));
+}
+#endif /* SYSCFG_CBR_CLL */
+
+/**
+ * @}
+ */
+
+/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU
+ * @{
+ */
+
+/**
+ * @brief Return the device identifier
+ * @note For STM32F75xxx and STM32F74xxx devices, the device ID is 0x449
+ * @note For STM32F77xxx and STM32F76xxx devices, the device ID is 0x451
+ * @note For STM32F72xxx and STM32F73xxx devices, the device ID is 0x452
+ * @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID
+ * @retval Values between Min_Data=0x00 and Max_Data=0xFFF
+ */
+__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void)
+{
+ return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID));
+}
+
+/**
+ * @brief Return the device revision identifier
+ * @note This field indicates the revision of the device.
+ For example, it is read as RevA -> 0x1000, Cat 2 revZ -> 0x1001
+ * @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID
+ * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF
+ */
+__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void)
+{
+ return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos);
+}
+
+/**
+ * @brief Enable the Debug Module during SLEEP mode
+ * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+ * @brief Disable the Debug Module during SLEEP mode
+ * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+ * @brief Enable the Debug Module during STOP mode
+ * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+ * @brief Disable the Debug Module during STOP mode
+ * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+ * @brief Enable the Debug Module during STANDBY mode
+ * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+ * @brief Disable the Debug Module during STANDBY mode
+ * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+ * @brief Set Trace pin assignment control
+ * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_SetTracePinAssignment\n
+ * DBGMCU_CR TRACE_MODE LL_DBGMCU_SetTracePinAssignment
+ * @param PinAssignment This parameter can be one of the following values:
+ * @arg @ref LL_DBGMCU_TRACE_NONE
+ * @arg @ref LL_DBGMCU_TRACE_ASYNCH
+ * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
+ * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
+ * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment(uint32_t PinAssignment)
+{
+ MODIFY_REG(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE, PinAssignment);
+}
+
+/**
+ * @brief Get Trace pin assignment control
+ * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_GetTracePinAssignment\n
+ * DBGMCU_CR TRACE_MODE LL_DBGMCU_GetTracePinAssignment
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DBGMCU_TRACE_NONE
+ * @arg @ref LL_DBGMCU_TRACE_ASYNCH
+ * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
+ * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
+ * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
+ */
+__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment(void)
+{
+ return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE));
+}
+
+/**
+ * @brief Freeze APB1 peripherals (group1 peripherals)
+ * @rmtoll DBGMCU_APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_LPTIM1_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_I2C3_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_I2C4_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_CAN3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_I2C4_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_CAN3_STOP (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs)
+{
+ SET_BIT(DBGMCU->APB1FZ, Periphs);
+}
+
+/**
+ * @brief Unfreeze APB1 peripherals (group1 peripherals)
+ * @rmtoll DBGMCU_APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_LPTIM1_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_I2C3_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_I2C4_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1_FZ DBG_CAN3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_I2C4_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_CAN3_STOP (*)
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs)
+{
+ CLEAR_BIT(DBGMCU->APB1FZ, Periphs);
+}
+
+/**
+ * @brief Freeze APB2 peripherals
+ * @rmtoll DBGMCU_APB2_FZ DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
+ * DBGMCU_APB2_FZ DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
+ * DBGMCU_APB2_FZ DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
+ * DBGMCU_APB2_FZ DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
+ * DBGMCU_APB2_FZ DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs)
+{
+ SET_BIT(DBGMCU->APB2FZ, Periphs);
+}
+
+/**
+ * @brief Unfreeze APB2 peripherals
+ * @rmtoll DBGMCU_APB2_FZ DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB2_FZ DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB2_FZ DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB2_FZ DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB2_FZ DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs)
+{
+ CLEAR_BIT(DBGMCU->APB2FZ, Periphs);
+}
+/**
+ * @}
+ */
+
+/** @defgroup SYSTEM_LL_EF_FLASH FLASH
+ * @{
+ */
+
+/**
+ * @brief Set FLASH Latency
+ * @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency
+ * @param Latency This parameter can be one of the following values:
+ * @arg @ref LL_FLASH_LATENCY_0
+ * @arg @ref LL_FLASH_LATENCY_1
+ * @arg @ref LL_FLASH_LATENCY_2
+ * @arg @ref LL_FLASH_LATENCY_3
+ * @arg @ref LL_FLASH_LATENCY_4
+ * @arg @ref LL_FLASH_LATENCY_5
+ * @arg @ref LL_FLASH_LATENCY_6
+ * @arg @ref LL_FLASH_LATENCY_7
+ * @arg @ref LL_FLASH_LATENCY_8
+ * @arg @ref LL_FLASH_LATENCY_9
+ * @arg @ref LL_FLASH_LATENCY_10
+ * @arg @ref LL_FLASH_LATENCY_11
+ * @arg @ref LL_FLASH_LATENCY_12
+ * @arg @ref LL_FLASH_LATENCY_13
+ * @arg @ref LL_FLASH_LATENCY_14
+ * @arg @ref LL_FLASH_LATENCY_15
+ * @retval None
+ */
+__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency)
+{
+ MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency);
+}
+
+/**
+ * @brief Get FLASH Latency
+ * @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_FLASH_LATENCY_0
+ * @arg @ref LL_FLASH_LATENCY_1
+ * @arg @ref LL_FLASH_LATENCY_2
+ * @arg @ref LL_FLASH_LATENCY_3
+ * @arg @ref LL_FLASH_LATENCY_4
+ * @arg @ref LL_FLASH_LATENCY_5
+ * @arg @ref LL_FLASH_LATENCY_6
+ * @arg @ref LL_FLASH_LATENCY_7
+ * @arg @ref LL_FLASH_LATENCY_8
+ * @arg @ref LL_FLASH_LATENCY_9
+ * @arg @ref LL_FLASH_LATENCY_10
+ * @arg @ref LL_FLASH_LATENCY_11
+ * @arg @ref LL_FLASH_LATENCY_12
+ * @arg @ref LL_FLASH_LATENCY_13
+ * @arg @ref LL_FLASH_LATENCY_14
+ * @arg @ref LL_FLASH_LATENCY_15
+ */
+__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void)
+{
+ return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY));
+}
+
+/**
+ * @brief Enable Prefetch
+ * @rmtoll FLASH_ACR PRFTEN LL_FLASH_EnablePrefetch
+ * @retval None
+ */
+__STATIC_INLINE void LL_FLASH_EnablePrefetch(void)
+{
+ SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN);
+}
+
+/**
+ * @brief Disable Prefetch
+ * @rmtoll FLASH_ACR PRFTEN LL_FLASH_DisablePrefetch
+ * @retval None
+ */
+__STATIC_INLINE void LL_FLASH_DisablePrefetch(void)
+{
+ CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN);
+}
+
+/**
+ * @brief Check if Prefetch buffer is enabled
+ * @rmtoll FLASH_ACR PRFTEN LL_FLASH_IsPrefetchEnabled
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void)
+{
+ return (READ_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) == (FLASH_ACR_PRFTEN));
+}
+
+
+
+/**
+ * @brief Enable ART Accelerator
+ * @rmtoll FLASH_ACR ARTEN LL_FLASH_EnableART
+ * @retval None
+ */
+__STATIC_INLINE void LL_FLASH_EnableART(void)
+{
+ SET_BIT(FLASH->ACR, FLASH_ACR_ARTEN);
+}
+
+/**
+ * @brief Disable ART Accelerator
+ * @rmtoll FLASH_ACR ARTEN LL_FLASH_DisableART
+ * @retval None
+ */
+__STATIC_INLINE void LL_FLASH_DisableART(void)
+{
+ CLEAR_BIT(FLASH->ACR, FLASH_ACR_ARTEN);
+}
+
+/**
+ * @brief Enable ART Reset
+ * @rmtoll FLASH_ACR ARTRST LL_FLASH_EnableARTReset
+ * @retval None
+ */
+__STATIC_INLINE void LL_FLASH_EnableARTReset(void)
+{
+ SET_BIT(FLASH->ACR, FLASH_ACR_ARTRST);
+}
+
+/**
+ * @brief Disable ART Reset
+ * @rmtoll FLASH_ACR ARTRST LL_FLASH_DisableARTReset
+ * @retval None
+ */
+__STATIC_INLINE void LL_FLASH_DisableARTReset(void)
+{
+ CLEAR_BIT(FLASH->ACR, FLASH_ACR_ARTRST);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_LL_SYSTEM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h
new file mode 100644
index 00000000..de906f0a
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h
@@ -0,0 +1,3558 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_ll_usart.h
+ * @author MCD Application Team
+ * @brief Header file of USART LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_LL_USART_H
+#define __STM32F7xx_LL_USART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx.h"
+
+/** @addtogroup STM32F7xx_LL_Driver
+ * @{
+ */
+
+#if defined (USART1) || defined (USART2) || defined (USART3) || defined (USART6) || defined (UART4) || defined (UART5) || defined (UART7) || defined (UART8)
+
+/** @defgroup USART_LL USART
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup USART_LL_Private_Constants USART Private Constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup USART_LL_Private_Macros USART Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup USART_LL_ES_INIT USART Exported Init structures
+ * @{
+ */
+
+/**
+ * @brief LL USART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This field defines expected Usart communication baud rate.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetBaudRate().*/
+
+ uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref USART_LL_EC_DATAWIDTH.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetDataWidth().*/
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref USART_LL_EC_STOPBITS.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetStopBitsLength().*/
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref USART_LL_EC_PARITY.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetParity().*/
+
+ uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref USART_LL_EC_DIRECTION.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetTransferDirection().*/
+
+ uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled.
+ This parameter can be a value of @ref USART_LL_EC_HWCONTROL.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetHWFlowCtrl().*/
+
+ uint32_t OverSampling; /*!< Specifies whether USART oversampling mode is 16 or 8.
+ This parameter can be a value of @ref USART_LL_EC_OVERSAMPLING.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetOverSampling().*/
+
+} LL_USART_InitTypeDef;
+
+/**
+ * @brief LL USART Clock Init Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockOutput; /*!< Specifies whether the USART clock is enabled or disabled.
+ This parameter can be a value of @ref USART_LL_EC_CLOCK.
+
+ USART HW configuration can be modified afterwards using unitary functions
+ @ref LL_USART_EnableSCLKOutput() or @ref LL_USART_DisableSCLKOutput().
+ For more details, refer to description of this function. */
+
+ uint32_t ClockPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref USART_LL_EC_POLARITY.
+
+ USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetClockPolarity().
+ For more details, refer to description of this function. */
+
+ uint32_t ClockPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref USART_LL_EC_PHASE.
+
+ USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetClockPhase().
+ For more details, refer to description of this function. */
+
+ uint32_t LastBitClockPulse; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref USART_LL_EC_LASTCLKPULSE.
+
+ USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetLastClkPulseOutput().
+ For more details, refer to description of this function. */
+
+} LL_USART_ClockInitTypeDef;
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USART_LL_Exported_Constants USART Exported Constants
+ * @{
+ */
+
+/** @defgroup USART_LL_EC_CLEAR_FLAG Clear Flags Defines
+ * @brief Flags defines which can be used with LL_USART_WriteReg function
+ * @{
+ */
+#define LL_USART_ICR_PECF USART_ICR_PECF /*!< Parity error flag */
+#define LL_USART_ICR_FECF USART_ICR_FECF /*!< Framing error flag */
+#define LL_USART_ICR_NCF USART_ICR_NCF /*!< Noise detected flag */
+#define LL_USART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error flag */
+#define LL_USART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected flag */
+#define LL_USART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete flag */
+#if defined(USART_TCBGT_SUPPORT)
+#define LL_USART_ICR_TCBGTCF USART_ICR_TCBGTCF /*!< Transmission completed before guard time flag */
+#endif
+#define LL_USART_ICR_LBDCF USART_ICR_LBDCF /*!< LIN break detection flag */
+#define LL_USART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS flag */
+#define LL_USART_ICR_RTOCF USART_ICR_RTOCF /*!< Receiver timeout flag */
+#define LL_USART_ICR_EOBCF USART_ICR_EOBCF /*!< End of block flag */
+#define LL_USART_ICR_CMCF USART_ICR_CMCF /*!< Character match flag */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_USART_ReadReg function
+ * @{
+ */
+#define LL_USART_ISR_PE USART_ISR_PE /*!< Parity error flag */
+#define LL_USART_ISR_FE USART_ISR_FE /*!< Framing error flag */
+#define LL_USART_ISR_NE USART_ISR_NE /*!< Noise detected flag */
+#define LL_USART_ISR_ORE USART_ISR_ORE /*!< Overrun error flag */
+#define LL_USART_ISR_IDLE USART_ISR_IDLE /*!< Idle line detected flag */
+#define LL_USART_ISR_RXNE USART_ISR_RXNE /*!< Read data register not empty flag */
+#define LL_USART_ISR_TC USART_ISR_TC /*!< Transmission complete flag */
+#define LL_USART_ISR_TXE USART_ISR_TXE /*!< Transmit data register empty flag */
+#define LL_USART_ISR_LBDF USART_ISR_LBDF /*!< LIN break detection flag */
+#define LL_USART_ISR_CTSIF USART_ISR_CTSIF /*!< CTS interrupt flag */
+#define LL_USART_ISR_CTS USART_ISR_CTS /*!< CTS flag */
+#define LL_USART_ISR_RTOF USART_ISR_RTOF /*!< Receiver timeout flag */
+#define LL_USART_ISR_EOBF USART_ISR_EOBF /*!< End of block flag */
+#define LL_USART_ISR_ABRE USART_ISR_ABRE /*!< Auto baud rate error flag */
+#define LL_USART_ISR_ABRF USART_ISR_ABRF /*!< Auto baud rate flag */
+#define LL_USART_ISR_BUSY USART_ISR_BUSY /*!< Busy flag */
+#define LL_USART_ISR_CMF USART_ISR_CMF /*!< Character match flag */
+#define LL_USART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */
+#define LL_USART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */
+#define LL_USART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */
+#if defined(USART_TCBGT_SUPPORT)
+#define LL_USART_ISR_TCBGT USART_ISR_TCBGT /*!< Transmission complete before guard time completion flag */
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_IT IT Defines
+ * @brief IT defines which can be used with LL_USART_ReadReg and LL_USART_WriteReg functions
+ * @{
+ */
+#define LL_USART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */
+#define LL_USART_CR1_RXNEIE USART_CR1_RXNEIE /*!< Read data register not empty interrupt enable */
+#define LL_USART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */
+#define LL_USART_CR1_TXEIE USART_CR1_TXEIE /*!< Transmit data register empty interrupt enable */
+#define LL_USART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */
+#define LL_USART_CR1_CMIE USART_CR1_CMIE /*!< Character match interrupt enable */
+#define LL_USART_CR1_RTOIE USART_CR1_RTOIE /*!< Receiver timeout interrupt enable */
+#define LL_USART_CR1_EOBIE USART_CR1_EOBIE /*!< End of Block interrupt enable */
+#define LL_USART_CR2_LBDIE USART_CR2_LBDIE /*!< LIN break detection interrupt enable */
+#define LL_USART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */
+#define LL_USART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */
+#if defined(USART_TCBGT_SUPPORT)
+#define LL_USART_CR3_TCBGTIE USART_CR3_TCBGTIE /*!< Transmission complete before guard time interrupt enable */
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_DIRECTION Communication Direction
+ * @{
+ */
+#define LL_USART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */
+#define LL_USART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */
+#define LL_USART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */
+#define LL_USART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_PARITY Parity Control
+ * @{
+ */
+#define LL_USART_PARITY_NONE 0x00000000U /*!< Parity control disabled */
+#define LL_USART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */
+#define LL_USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_WAKEUP Wakeup
+ * @{
+ */
+#define LL_USART_WAKEUP_IDLELINE 0x00000000U /*!< USART wake up from Mute mode on Idle Line */
+#define LL_USART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< USART wake up from Mute mode on Address Mark */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_DATAWIDTH Datawidth
+ * @{
+ */
+#define LL_USART_DATAWIDTH_7B USART_CR1_M1 /*!< 7 bits word length : Start bit, 7 data bits, n stop bits */
+#define LL_USART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */
+#define LL_USART_DATAWIDTH_9B USART_CR1_M0 /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_OVERSAMPLING Oversampling
+ * @{
+ */
+#define LL_USART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */
+#define LL_USART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup USART_LL_EC_CLOCK Clock Signal
+ * @{
+ */
+
+#define LL_USART_CLOCK_DISABLE 0x00000000U /*!< Clock signal not provided */
+#define LL_USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< Clock signal provided */
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/** @defgroup USART_LL_EC_LASTCLKPULSE Last Clock Pulse
+ * @{
+ */
+#define LL_USART_LASTCLKPULSE_NO_OUTPUT 0x00000000U /*!< The clock pulse of the last data bit is not output to the SCLK pin */
+#define LL_USART_LASTCLKPULSE_OUTPUT USART_CR2_LBCL /*!< The clock pulse of the last data bit is output to the SCLK pin */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_PHASE Clock Phase
+ * @{
+ */
+#define LL_USART_PHASE_1EDGE 0x00000000U /*!< The first clock transition is the first data capture edge */
+#define LL_USART_PHASE_2EDGE USART_CR2_CPHA /*!< The second clock transition is the first data capture edge */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_POLARITY Clock Polarity
+ * @{
+ */
+#define LL_USART_POLARITY_LOW 0x00000000U /*!< Steady low value on SCLK pin outside transmission window*/
+#define LL_USART_POLARITY_HIGH USART_CR2_CPOL /*!< Steady high value on SCLK pin outside transmission window */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_STOPBITS Stop Bits
+ * @{
+ */
+#define LL_USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< 0.5 stop bit */
+#define LL_USART_STOPBITS_1 0x00000000U /*!< 1 stop bit */
+#define LL_USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< 1.5 stop bits */
+#define LL_USART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_TXRX TX RX Pins Swap
+ * @{
+ */
+#define LL_USART_TXRX_STANDARD 0x00000000U /*!< TX/RX pins are used as defined in standard pinout */
+#define LL_USART_TXRX_SWAPPED (USART_CR2_SWAP) /*!< TX and RX pins functions are swapped. */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_RXPIN_LEVEL RX Pin Active Level Inversion
+ * @{
+ */
+#define LL_USART_RXPIN_LEVEL_STANDARD 0x00000000U /*!< RX pin signal works using the standard logic levels */
+#define LL_USART_RXPIN_LEVEL_INVERTED (USART_CR2_RXINV) /*!< RX pin signal values are inverted. */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_TXPIN_LEVEL TX Pin Active Level Inversion
+ * @{
+ */
+#define LL_USART_TXPIN_LEVEL_STANDARD 0x00000000U /*!< TX pin signal works using the standard logic levels */
+#define LL_USART_TXPIN_LEVEL_INVERTED (USART_CR2_TXINV) /*!< TX pin signal values are inverted. */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_BINARY_LOGIC Binary Data Inversion
+ * @{
+ */
+#define LL_USART_BINARY_LOGIC_POSITIVE 0x00000000U /*!< Logical data from the data register are send/received in positive/direct logic. (1=H, 0=L) */
+#define LL_USART_BINARY_LOGIC_NEGATIVE USART_CR2_DATAINV /*!< Logical data from the data register are send/received in negative/inverse logic. (1=L, 0=H). The parity bit is also inverted. */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_BITORDER Bit Order
+ * @{
+ */
+#define LL_USART_BITORDER_LSBFIRST 0x00000000U /*!< data is transmitted/received with data bit 0 first, following the start bit */
+#define LL_USART_BITORDER_MSBFIRST USART_CR2_MSBFIRST /*!< data is transmitted/received with the MSB first, following the start bit */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_AUTOBAUD_DETECT_ON Autobaud Detection
+ * @{
+ */
+#define LL_USART_AUTOBAUD_DETECT_ON_STARTBIT 0x00000000U /*!< Measurement of the start bit is used to detect the baud rate */
+#define LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE USART_CR2_ABRMODE_0 /*!< Falling edge to falling edge measurement. Received frame must start with a single bit = 1 -> Frame = Start10xxxxxx */
+#define LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME USART_CR2_ABRMODE_1 /*!< 0x7F frame detection */
+#define LL_USART_AUTOBAUD_DETECT_ON_55_FRAME (USART_CR2_ABRMODE_1 | USART_CR2_ABRMODE_0) /*!< 0x55 frame detection */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_ADDRESS_DETECT Address Length Detection
+ * @{
+ */
+#define LL_USART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit address detection method selected */
+#define LL_USART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit address detection (in 8-bit data mode) method selected */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_HWCONTROL Hardware Control
+ * @{
+ */
+#define LL_USART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */
+#define LL_USART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested when there is space in the receive buffer */
+#define LL_USART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted when the nCTS input is asserted (tied to 0) */
+#define LL_USART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */
+/**
+ * @}
+ */
+
+
+/** @defgroup USART_LL_EC_IRDA_POWER IrDA Power
+ * @{
+ */
+#define LL_USART_IRDA_POWER_NORMAL 0x00000000U /*!< IrDA normal power mode */
+#define LL_USART_IRDA_POWER_LOW USART_CR3_IRLP /*!< IrDA low power mode */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_LINBREAK_DETECT LIN Break Detection Length
+ * @{
+ */
+#define LL_USART_LINBREAK_DETECT_10B 0x00000000U /*!< 10-bit break detection method selected */
+#define LL_USART_LINBREAK_DETECT_11B USART_CR2_LBDL /*!< 11-bit break detection method selected */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_DE_POLARITY Driver Enable Polarity
+ * @{
+ */
+#define LL_USART_DE_POLARITY_HIGH 0x00000000U /*!< DE signal is active high */
+#define LL_USART_DE_POLARITY_LOW USART_CR3_DEP /*!< DE signal is active low */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_DMA_REG_DATA DMA Register Data
+ * @{
+ */
+#define LL_USART_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */
+#define LL_USART_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup USART_LL_Exported_Macros USART Exported Macros
+ * @{
+ */
+
+/** @defgroup USART_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in USART register
+ * @param __INSTANCE__ USART Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_USART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in USART register
+ * @param __INSTANCE__ USART Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_USART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EM_Exported_Macros_Helper Exported_Macros_Helper
+ * @{
+ */
+
+/**
+ * @brief Compute USARTDIV value according to Peripheral Clock and
+ * expected Baud Rate in 8 bits sampling mode (32 bits value of USARTDIV is returned)
+ * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance
+ * @param __BAUDRATE__ Baud rate value to achieve
+ * @retval USARTDIV value to be used for BRR register filling in OverSampling_8 case
+ */
+#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) ((((__PERIPHCLK__)*2) + ((__BAUDRATE__)/2))/(__BAUDRATE__))
+
+/**
+ * @brief Compute USARTDIV value according to Peripheral Clock and
+ * expected Baud Rate in 16 bits sampling mode (32 bits value of USARTDIV is returned)
+ * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance
+ * @param __BAUDRATE__ Baud rate value to achieve
+ * @retval USARTDIV value to be used for BRR register filling in OverSampling_16 case
+ */
+#define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) (((__PERIPHCLK__) + ((__BAUDRATE__)/2))/(__BAUDRATE__))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup USART_LL_Exported_Functions USART Exported Functions
+ * @{
+ */
+
+/** @defgroup USART_LL_EF_Configuration Configuration functions
+ * @{
+ */
+
+/**
+ * @brief USART Enable
+ * @rmtoll CR1 UE LL_USART_Enable
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_Enable(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_UE);
+}
+
+/**
+ * @brief USART Disable (all USART prescalers and outputs are disabled)
+ * @note When USART is disabled, USART prescalers and outputs are stopped immediately,
+ * and current operations are discarded. The configuration of the USART is kept, but all the status
+ * flags, in the USARTx_ISR are set to their default values.
+ * @rmtoll CR1 UE LL_USART_Disable
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_Disable(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_UE);
+}
+
+/**
+ * @brief Indicate if USART is enabled
+ * @rmtoll CR1 UE LL_USART_IsEnabled
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabled(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_UE) == (USART_CR1_UE));
+}
+
+
+/**
+ * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit)
+ * @rmtoll CR1 RE LL_USART_EnableDirectionRx
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_RE);
+}
+
+/**
+ * @brief Receiver Disable
+ * @rmtoll CR1 RE LL_USART_DisableDirectionRx
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_RE);
+}
+
+/**
+ * @brief Transmitter Enable
+ * @rmtoll CR1 TE LL_USART_EnableDirectionTx
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_TE);
+}
+
+/**
+ * @brief Transmitter Disable
+ * @rmtoll CR1 TE LL_USART_DisableDirectionTx
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_TE);
+}
+
+/**
+ * @brief Configure simultaneously enabled/disabled states
+ * of Transmitter and Receiver
+ * @rmtoll CR1 RE LL_USART_SetTransferDirection\n
+ * CR1 TE LL_USART_SetTransferDirection
+ * @param USARTx USART Instance
+ * @param TransferDirection This parameter can be one of the following values:
+ * @arg @ref LL_USART_DIRECTION_NONE
+ * @arg @ref LL_USART_DIRECTION_RX
+ * @arg @ref LL_USART_DIRECTION_TX
+ * @arg @ref LL_USART_DIRECTION_TX_RX
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetTransferDirection(USART_TypeDef *USARTx, uint32_t TransferDirection)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection);
+}
+
+/**
+ * @brief Return enabled/disabled states of Transmitter and Receiver
+ * @rmtoll CR1 RE LL_USART_GetTransferDirection\n
+ * CR1 TE LL_USART_GetTransferDirection
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_DIRECTION_NONE
+ * @arg @ref LL_USART_DIRECTION_RX
+ * @arg @ref LL_USART_DIRECTION_TX
+ * @arg @ref LL_USART_DIRECTION_TX_RX
+ */
+__STATIC_INLINE uint32_t LL_USART_GetTransferDirection(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_RE | USART_CR1_TE));
+}
+
+/**
+ * @brief Configure Parity (enabled/disabled and parity mode if enabled).
+ * @note This function selects if hardware parity control (generation and detection) is enabled or disabled.
+ * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position
+ * (9th or 8th bit depending on data width) and parity is checked on the received data.
+ * @rmtoll CR1 PS LL_USART_SetParity\n
+ * CR1 PCE LL_USART_SetParity
+ * @param USARTx USART Instance
+ * @param Parity This parameter can be one of the following values:
+ * @arg @ref LL_USART_PARITY_NONE
+ * @arg @ref LL_USART_PARITY_EVEN
+ * @arg @ref LL_USART_PARITY_ODD
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetParity(USART_TypeDef *USARTx, uint32_t Parity)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity);
+}
+
+/**
+ * @brief Return Parity configuration (enabled/disabled and parity mode if enabled)
+ * @rmtoll CR1 PS LL_USART_GetParity\n
+ * CR1 PCE LL_USART_GetParity
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_PARITY_NONE
+ * @arg @ref LL_USART_PARITY_EVEN
+ * @arg @ref LL_USART_PARITY_ODD
+ */
+__STATIC_INLINE uint32_t LL_USART_GetParity(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE));
+}
+
+/**
+ * @brief Set Receiver Wake Up method from Mute mode.
+ * @rmtoll CR1 WAKE LL_USART_SetWakeUpMethod
+ * @param USARTx USART Instance
+ * @param Method This parameter can be one of the following values:
+ * @arg @ref LL_USART_WAKEUP_IDLELINE
+ * @arg @ref LL_USART_WAKEUP_ADDRESSMARK
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetWakeUpMethod(USART_TypeDef *USARTx, uint32_t Method)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_WAKE, Method);
+}
+
+/**
+ * @brief Return Receiver Wake Up method from Mute mode
+ * @rmtoll CR1 WAKE LL_USART_GetWakeUpMethod
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_WAKEUP_IDLELINE
+ * @arg @ref LL_USART_WAKEUP_ADDRESSMARK
+ */
+__STATIC_INLINE uint32_t LL_USART_GetWakeUpMethod(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_WAKE));
+}
+
+/**
+ * @brief Set Word length (i.e. nb of data bits, excluding start and stop bits)
+ * @rmtoll CR1 M0 LL_USART_SetDataWidth\n
+ * CR1 M1 LL_USART_SetDataWidth
+ * @param USARTx USART Instance
+ * @param DataWidth This parameter can be one of the following values:
+ * @arg @ref LL_USART_DATAWIDTH_7B
+ * @arg @ref LL_USART_DATAWIDTH_8B
+ * @arg @ref LL_USART_DATAWIDTH_9B
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetDataWidth(USART_TypeDef *USARTx, uint32_t DataWidth)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_M, DataWidth);
+}
+
+/**
+ * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits)
+ * @rmtoll CR1 M0 LL_USART_GetDataWidth\n
+ * CR1 M1 LL_USART_GetDataWidth
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_DATAWIDTH_7B
+ * @arg @ref LL_USART_DATAWIDTH_8B
+ * @arg @ref LL_USART_DATAWIDTH_9B
+ */
+__STATIC_INLINE uint32_t LL_USART_GetDataWidth(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_M));
+}
+
+/**
+ * @brief Allow switch between Mute Mode and Active mode
+ * @rmtoll CR1 MME LL_USART_EnableMuteMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableMuteMode(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_MME);
+}
+
+/**
+ * @brief Prevent Mute Mode use. Set Receiver in active mode permanently.
+ * @rmtoll CR1 MME LL_USART_DisableMuteMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableMuteMode(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_MME);
+}
+
+/**
+ * @brief Indicate if switch between Mute Mode and Active mode is allowed
+ * @rmtoll CR1 MME LL_USART_IsEnabledMuteMode
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledMuteMode(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_MME) == (USART_CR1_MME));
+}
+
+/**
+ * @brief Set Oversampling to 8-bit or 16-bit mode
+ * @rmtoll CR1 OVER8 LL_USART_SetOverSampling
+ * @param USARTx USART Instance
+ * @param OverSampling This parameter can be one of the following values:
+ * @arg @ref LL_USART_OVERSAMPLING_16
+ * @arg @ref LL_USART_OVERSAMPLING_8
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetOverSampling(USART_TypeDef *USARTx, uint32_t OverSampling)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_OVER8, OverSampling);
+}
+
+/**
+ * @brief Return Oversampling mode
+ * @rmtoll CR1 OVER8 LL_USART_GetOverSampling
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_OVERSAMPLING_16
+ * @arg @ref LL_USART_OVERSAMPLING_8
+ */
+__STATIC_INLINE uint32_t LL_USART_GetOverSampling(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_OVER8));
+}
+
+/**
+ * @brief Configure if Clock pulse of the last data bit is output to the SCLK pin or not
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 LBCL LL_USART_SetLastClkPulseOutput
+ * @param USARTx USART Instance
+ * @param LastBitClockPulse This parameter can be one of the following values:
+ * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT
+ * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetLastClkPulseOutput(USART_TypeDef *USARTx, uint32_t LastBitClockPulse)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_LBCL, LastBitClockPulse);
+}
+
+/**
+ * @brief Retrieve Clock pulse of the last data bit output configuration
+ * (Last bit Clock pulse output to the SCLK pin or not)
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 LBCL LL_USART_GetLastClkPulseOutput
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT
+ * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT
+ */
+__STATIC_INLINE uint32_t LL_USART_GetLastClkPulseOutput(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBCL));
+}
+
+/**
+ * @brief Select the phase of the clock output on the SCLK pin in synchronous mode
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CPHA LL_USART_SetClockPhase
+ * @param USARTx USART Instance
+ * @param ClockPhase This parameter can be one of the following values:
+ * @arg @ref LL_USART_PHASE_1EDGE
+ * @arg @ref LL_USART_PHASE_2EDGE
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetClockPhase(USART_TypeDef *USARTx, uint32_t ClockPhase)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_CPHA, ClockPhase);
+}
+
+/**
+ * @brief Return phase of the clock output on the SCLK pin in synchronous mode
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CPHA LL_USART_GetClockPhase
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_PHASE_1EDGE
+ * @arg @ref LL_USART_PHASE_2EDGE
+ */
+__STATIC_INLINE uint32_t LL_USART_GetClockPhase(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPHA));
+}
+
+/**
+ * @brief Select the polarity of the clock output on the SCLK pin in synchronous mode
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CPOL LL_USART_SetClockPolarity
+ * @param USARTx USART Instance
+ * @param ClockPolarity This parameter can be one of the following values:
+ * @arg @ref LL_USART_POLARITY_LOW
+ * @arg @ref LL_USART_POLARITY_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetClockPolarity(USART_TypeDef *USARTx, uint32_t ClockPolarity)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_CPOL, ClockPolarity);
+}
+
+/**
+ * @brief Return polarity of the clock output on the SCLK pin in synchronous mode
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CPOL LL_USART_GetClockPolarity
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_POLARITY_LOW
+ * @arg @ref LL_USART_POLARITY_HIGH
+ */
+__STATIC_INLINE uint32_t LL_USART_GetClockPolarity(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPOL));
+}
+
+/**
+ * @brief Configure Clock signal format (Phase Polarity and choice about output of last bit clock pulse)
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clock Phase configuration using @ref LL_USART_SetClockPhase() function
+ * - Clock Polarity configuration using @ref LL_USART_SetClockPolarity() function
+ * - Output of Last bit Clock pulse configuration using @ref LL_USART_SetLastClkPulseOutput() function
+ * @rmtoll CR2 CPHA LL_USART_ConfigClock\n
+ * CR2 CPOL LL_USART_ConfigClock\n
+ * CR2 LBCL LL_USART_ConfigClock
+ * @param USARTx USART Instance
+ * @param Phase This parameter can be one of the following values:
+ * @arg @ref LL_USART_PHASE_1EDGE
+ * @arg @ref LL_USART_PHASE_2EDGE
+ * @param Polarity This parameter can be one of the following values:
+ * @arg @ref LL_USART_POLARITY_LOW
+ * @arg @ref LL_USART_POLARITY_HIGH
+ * @param LBCPOutput This parameter can be one of the following values:
+ * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT
+ * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigClock(USART_TypeDef *USARTx, uint32_t Phase, uint32_t Polarity, uint32_t LBCPOutput)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, Phase | Polarity | LBCPOutput);
+}
+
+/**
+ * @brief Enable Clock output on SCLK pin
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CLKEN LL_USART_EnableSCLKOutput
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableSCLKOutput(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR2, USART_CR2_CLKEN);
+}
+
+/**
+ * @brief Disable Clock output on SCLK pin
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CLKEN LL_USART_DisableSCLKOutput
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableSCLKOutput(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN);
+}
+
+/**
+ * @brief Indicate if Clock output on SCLK pin is enabled
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CLKEN LL_USART_IsEnabledSCLKOutput
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledSCLKOutput(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR2, USART_CR2_CLKEN) == (USART_CR2_CLKEN));
+}
+
+/**
+ * @brief Set the length of the stop bits
+ * @rmtoll CR2 STOP LL_USART_SetStopBitsLength
+ * @param USARTx USART Instance
+ * @param StopBits This parameter can be one of the following values:
+ * @arg @ref LL_USART_STOPBITS_0_5
+ * @arg @ref LL_USART_STOPBITS_1
+ * @arg @ref LL_USART_STOPBITS_1_5
+ * @arg @ref LL_USART_STOPBITS_2
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetStopBitsLength(USART_TypeDef *USARTx, uint32_t StopBits)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits);
+}
+
+/**
+ * @brief Retrieve the length of the stop bits
+ * @rmtoll CR2 STOP LL_USART_GetStopBitsLength
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_STOPBITS_0_5
+ * @arg @ref LL_USART_STOPBITS_1
+ * @arg @ref LL_USART_STOPBITS_1_5
+ * @arg @ref LL_USART_STOPBITS_2
+ */
+__STATIC_INLINE uint32_t LL_USART_GetStopBitsLength(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_STOP));
+}
+
+/**
+ * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits)
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Data Width configuration using @ref LL_USART_SetDataWidth() function
+ * - Parity Control and mode configuration using @ref LL_USART_SetParity() function
+ * - Stop bits configuration using @ref LL_USART_SetStopBitsLength() function
+ * @rmtoll CR1 PS LL_USART_ConfigCharacter\n
+ * CR1 PCE LL_USART_ConfigCharacter\n
+ * CR1 M0 LL_USART_ConfigCharacter\n
+ * CR1 M1 LL_USART_ConfigCharacter\n
+ * CR2 STOP LL_USART_ConfigCharacter
+ * @param USARTx USART Instance
+ * @param DataWidth This parameter can be one of the following values:
+ * @arg @ref LL_USART_DATAWIDTH_7B
+ * @arg @ref LL_USART_DATAWIDTH_8B
+ * @arg @ref LL_USART_DATAWIDTH_9B
+ * @param Parity This parameter can be one of the following values:
+ * @arg @ref LL_USART_PARITY_NONE
+ * @arg @ref LL_USART_PARITY_EVEN
+ * @arg @ref LL_USART_PARITY_ODD
+ * @param StopBits This parameter can be one of the following values:
+ * @arg @ref LL_USART_STOPBITS_0_5
+ * @arg @ref LL_USART_STOPBITS_1
+ * @arg @ref LL_USART_STOPBITS_1_5
+ * @arg @ref LL_USART_STOPBITS_2
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigCharacter(USART_TypeDef *USARTx, uint32_t DataWidth, uint32_t Parity,
+ uint32_t StopBits)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth);
+ MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits);
+}
+
+/**
+ * @brief Configure TX/RX pins swapping setting.
+ * @rmtoll CR2 SWAP LL_USART_SetTXRXSwap
+ * @param USARTx USART Instance
+ * @param SwapConfig This parameter can be one of the following values:
+ * @arg @ref LL_USART_TXRX_STANDARD
+ * @arg @ref LL_USART_TXRX_SWAPPED
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetTXRXSwap(USART_TypeDef *USARTx, uint32_t SwapConfig)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_SWAP, SwapConfig);
+}
+
+/**
+ * @brief Retrieve TX/RX pins swapping configuration.
+ * @rmtoll CR2 SWAP LL_USART_GetTXRXSwap
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_TXRX_STANDARD
+ * @arg @ref LL_USART_TXRX_SWAPPED
+ */
+__STATIC_INLINE uint32_t LL_USART_GetTXRXSwap(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_SWAP));
+}
+
+/**
+ * @brief Configure RX pin active level logic
+ * @rmtoll CR2 RXINV LL_USART_SetRXPinLevel
+ * @param USARTx USART Instance
+ * @param PinInvMethod This parameter can be one of the following values:
+ * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD
+ * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetRXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_RXINV, PinInvMethod);
+}
+
+/**
+ * @brief Retrieve RX pin active level logic configuration
+ * @rmtoll CR2 RXINV LL_USART_GetRXPinLevel
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD
+ * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED
+ */
+__STATIC_INLINE uint32_t LL_USART_GetRXPinLevel(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_RXINV));
+}
+
+/**
+ * @brief Configure TX pin active level logic
+ * @rmtoll CR2 TXINV LL_USART_SetTXPinLevel
+ * @param USARTx USART Instance
+ * @param PinInvMethod This parameter can be one of the following values:
+ * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD
+ * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetTXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_TXINV, PinInvMethod);
+}
+
+/**
+ * @brief Retrieve TX pin active level logic configuration
+ * @rmtoll CR2 TXINV LL_USART_GetTXPinLevel
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD
+ * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED
+ */
+__STATIC_INLINE uint32_t LL_USART_GetTXPinLevel(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_TXINV));
+}
+
+/**
+ * @brief Configure Binary data logic.
+ * @note Allow to define how Logical data from the data register are send/received :
+ * either in positive/direct logic (1=H, 0=L) or in negative/inverse logic (1=L, 0=H)
+ * @rmtoll CR2 DATAINV LL_USART_SetBinaryDataLogic
+ * @param USARTx USART Instance
+ * @param DataLogic This parameter can be one of the following values:
+ * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE
+ * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetBinaryDataLogic(USART_TypeDef *USARTx, uint32_t DataLogic)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_DATAINV, DataLogic);
+}
+
+/**
+ * @brief Retrieve Binary data configuration
+ * @rmtoll CR2 DATAINV LL_USART_GetBinaryDataLogic
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE
+ * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE
+ */
+__STATIC_INLINE uint32_t LL_USART_GetBinaryDataLogic(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_DATAINV));
+}
+
+/**
+ * @brief Configure transfer bit order (either Less or Most Significant Bit First)
+ * @note MSB First means data is transmitted/received with the MSB first, following the start bit.
+ * LSB First means data is transmitted/received with data bit 0 first, following the start bit.
+ * @rmtoll CR2 MSBFIRST LL_USART_SetTransferBitOrder
+ * @param USARTx USART Instance
+ * @param BitOrder This parameter can be one of the following values:
+ * @arg @ref LL_USART_BITORDER_LSBFIRST
+ * @arg @ref LL_USART_BITORDER_MSBFIRST
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetTransferBitOrder(USART_TypeDef *USARTx, uint32_t BitOrder)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_MSBFIRST, BitOrder);
+}
+
+/**
+ * @brief Return transfer bit order (either Less or Most Significant Bit First)
+ * @note MSB First means data is transmitted/received with the MSB first, following the start bit.
+ * LSB First means data is transmitted/received with data bit 0 first, following the start bit.
+ * @rmtoll CR2 MSBFIRST LL_USART_GetTransferBitOrder
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_BITORDER_LSBFIRST
+ * @arg @ref LL_USART_BITORDER_MSBFIRST
+ */
+__STATIC_INLINE uint32_t LL_USART_GetTransferBitOrder(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_MSBFIRST));
+}
+
+/**
+ * @brief Enable Auto Baud-Rate Detection
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll CR2 ABREN LL_USART_EnableAutoBaudRate
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableAutoBaudRate(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR2, USART_CR2_ABREN);
+}
+
+/**
+ * @brief Disable Auto Baud-Rate Detection
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll CR2 ABREN LL_USART_DisableAutoBaudRate
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableAutoBaudRate(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR2, USART_CR2_ABREN);
+}
+
+/**
+ * @brief Indicate if Auto Baud-Rate Detection mechanism is enabled
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll CR2 ABREN LL_USART_IsEnabledAutoBaud
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledAutoBaud(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR2, USART_CR2_ABREN) == (USART_CR2_ABREN));
+}
+
+/**
+ * @brief Set Auto Baud-Rate mode bits
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll CR2 ABRMODE LL_USART_SetAutoBaudRateMode
+ * @param USARTx USART Instance
+ * @param AutoBaudRateMode This parameter can be one of the following values:
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetAutoBaudRateMode(USART_TypeDef *USARTx, uint32_t AutoBaudRateMode)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_ABRMODE, AutoBaudRateMode);
+}
+
+/**
+ * @brief Return Auto Baud-Rate mode
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll CR2 ABRMODE LL_USART_GetAutoBaudRateMode
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME
+ */
+__STATIC_INLINE uint32_t LL_USART_GetAutoBaudRateMode(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ABRMODE));
+}
+
+/**
+ * @brief Enable Receiver Timeout
+ * @rmtoll CR2 RTOEN LL_USART_EnableRxTimeout
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableRxTimeout(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR2, USART_CR2_RTOEN);
+}
+
+/**
+ * @brief Disable Receiver Timeout
+ * @rmtoll CR2 RTOEN LL_USART_DisableRxTimeout
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableRxTimeout(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR2, USART_CR2_RTOEN);
+}
+
+/**
+ * @brief Indicate if Receiver Timeout feature is enabled
+ * @rmtoll CR2 RTOEN LL_USART_IsEnabledRxTimeout
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledRxTimeout(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR2, USART_CR2_RTOEN) == (USART_CR2_RTOEN));
+}
+
+/**
+ * @brief Set Address of the USART node.
+ * @note This is used in multiprocessor communication during Mute mode or Stop mode,
+ * for wake up with address mark detection.
+ * @note 4bits address node is used when 4-bit Address Detection is selected in ADDM7.
+ * (b7-b4 should be set to 0)
+ * 8bits address node is used when 7-bit Address Detection is selected in ADDM7.
+ * (This is used in multiprocessor communication during Mute mode or Stop mode,
+ * for wake up with 7-bit address mark detection.
+ * The MSB of the character sent by the transmitter should be equal to 1.
+ * It may also be used for character detection during normal reception,
+ * Mute mode inactive (for example, end of block detection in ModBus protocol).
+ * In this case, the whole received character (8-bit) is compared to the ADD[7:0]
+ * value and CMF flag is set on match)
+ * @rmtoll CR2 ADD LL_USART_ConfigNodeAddress\n
+ * CR2 ADDM7 LL_USART_ConfigNodeAddress
+ * @param USARTx USART Instance
+ * @param AddressLen This parameter can be one of the following values:
+ * @arg @ref LL_USART_ADDRESS_DETECT_4B
+ * @arg @ref LL_USART_ADDRESS_DETECT_7B
+ * @param NodeAddress 4 or 7 bit Address of the USART node.
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigNodeAddress(USART_TypeDef *USARTx, uint32_t AddressLen, uint32_t NodeAddress)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_ADD | USART_CR2_ADDM7,
+ (uint32_t)(AddressLen | (NodeAddress << USART_CR2_ADD_Pos)));
+}
+
+/**
+ * @brief Return 8 bit Address of the USART node as set in ADD field of CR2.
+ * @note If 4-bit Address Detection is selected in ADDM7,
+ * only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant)
+ * If 7-bit Address Detection is selected in ADDM7,
+ * only 8bits (b7-b0) of returned value are relevant (b31-b8 are not relevant)
+ * @rmtoll CR2 ADD LL_USART_GetNodeAddress
+ * @param USARTx USART Instance
+ * @retval Address of the USART node (Value between Min_Data=0 and Max_Data=255)
+ */
+__STATIC_INLINE uint32_t LL_USART_GetNodeAddress(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADD) >> USART_CR2_ADD_Pos);
+}
+
+/**
+ * @brief Return Length of Node Address used in Address Detection mode (7-bit or 4-bit)
+ * @rmtoll CR2 ADDM7 LL_USART_GetNodeAddressLen
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_ADDRESS_DETECT_4B
+ * @arg @ref LL_USART_ADDRESS_DETECT_7B
+ */
+__STATIC_INLINE uint32_t LL_USART_GetNodeAddressLen(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADDM7));
+}
+
+/**
+ * @brief Enable RTS HW Flow Control
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 RTSE LL_USART_EnableRTSHWFlowCtrl
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableRTSHWFlowCtrl(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_RTSE);
+}
+
+/**
+ * @brief Disable RTS HW Flow Control
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 RTSE LL_USART_DisableRTSHWFlowCtrl
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableRTSHWFlowCtrl(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_RTSE);
+}
+
+/**
+ * @brief Enable CTS HW Flow Control
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 CTSE LL_USART_EnableCTSHWFlowCtrl
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableCTSHWFlowCtrl(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_CTSE);
+}
+
+/**
+ * @brief Disable CTS HW Flow Control
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 CTSE LL_USART_DisableCTSHWFlowCtrl
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableCTSHWFlowCtrl(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_CTSE);
+}
+
+/**
+ * @brief Configure HW Flow Control mode (both CTS and RTS)
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 RTSE LL_USART_SetHWFlowCtrl\n
+ * CR3 CTSE LL_USART_SetHWFlowCtrl
+ * @param USARTx USART Instance
+ * @param HardwareFlowControl This parameter can be one of the following values:
+ * @arg @ref LL_USART_HWCONTROL_NONE
+ * @arg @ref LL_USART_HWCONTROL_RTS
+ * @arg @ref LL_USART_HWCONTROL_CTS
+ * @arg @ref LL_USART_HWCONTROL_RTS_CTS
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetHWFlowCtrl(USART_TypeDef *USARTx, uint32_t HardwareFlowControl)
+{
+ MODIFY_REG(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl);
+}
+
+/**
+ * @brief Return HW Flow Control configuration (both CTS and RTS)
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 RTSE LL_USART_GetHWFlowCtrl\n
+ * CR3 CTSE LL_USART_GetHWFlowCtrl
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_HWCONTROL_NONE
+ * @arg @ref LL_USART_HWCONTROL_RTS
+ * @arg @ref LL_USART_HWCONTROL_CTS
+ * @arg @ref LL_USART_HWCONTROL_RTS_CTS
+ */
+__STATIC_INLINE uint32_t LL_USART_GetHWFlowCtrl(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE));
+}
+
+/**
+ * @brief Enable One bit sampling method
+ * @rmtoll CR3 ONEBIT LL_USART_EnableOneBitSamp
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableOneBitSamp(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_ONEBIT);
+}
+
+/**
+ * @brief Disable One bit sampling method
+ * @rmtoll CR3 ONEBIT LL_USART_DisableOneBitSamp
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableOneBitSamp(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_ONEBIT);
+}
+
+/**
+ * @brief Indicate if One bit sampling method is enabled
+ * @rmtoll CR3 ONEBIT LL_USART_IsEnabledOneBitSamp
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledOneBitSamp(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_ONEBIT) == (USART_CR3_ONEBIT));
+}
+
+/**
+ * @brief Enable Overrun detection
+ * @rmtoll CR3 OVRDIS LL_USART_EnableOverrunDetect
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableOverrunDetect(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_OVRDIS);
+}
+
+/**
+ * @brief Disable Overrun detection
+ * @rmtoll CR3 OVRDIS LL_USART_DisableOverrunDetect
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableOverrunDetect(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_OVRDIS);
+}
+
+/**
+ * @brief Indicate if Overrun detection is enabled
+ * @rmtoll CR3 OVRDIS LL_USART_IsEnabledOverrunDetect
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledOverrunDetect(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_OVRDIS) != USART_CR3_OVRDIS);
+}
+
+
+/**
+ * @brief Configure USART BRR register for achieving expected Baud Rate value.
+ * @note Compute and set USARTDIV value in BRR Register (full BRR content)
+ * according to used Peripheral Clock, Oversampling mode, and expected Baud Rate values
+ * @note Peripheral clock and Baud rate values provided as function parameters should be valid
+ * (Baud rate value != 0)
+ * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d.
+ * @rmtoll BRR BRR LL_USART_SetBaudRate
+ * @param USARTx USART Instance
+ * @param PeriphClk Peripheral Clock
+ * @param OverSampling This parameter can be one of the following values:
+ * @arg @ref LL_USART_OVERSAMPLING_16
+ * @arg @ref LL_USART_OVERSAMPLING_8
+ * @param BaudRate Baud Rate
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling,
+ uint32_t BaudRate)
+{
+ register uint32_t usartdiv = 0x0U;
+ register uint32_t brrtemp = 0x0U;
+
+ if (OverSampling == LL_USART_OVERSAMPLING_8)
+ {
+ usartdiv = (uint16_t)(__LL_USART_DIV_SAMPLING8(PeriphClk, BaudRate));
+ brrtemp = usartdiv & 0xFFF0U;
+ brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U);
+ USARTx->BRR = brrtemp;
+ }
+ else
+ {
+ USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING16(PeriphClk, BaudRate));
+ }
+}
+
+/**
+ * @brief Return current Baud Rate value, according to USARTDIV present in BRR register
+ * (full BRR content), and to used Peripheral Clock and Oversampling mode values
+ * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned.
+ * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d.
+ * @rmtoll BRR BRR LL_USART_GetBaudRate
+ * @param USARTx USART Instance
+ * @param PeriphClk Peripheral Clock
+ * @param OverSampling This parameter can be one of the following values:
+ * @arg @ref LL_USART_OVERSAMPLING_16
+ * @arg @ref LL_USART_OVERSAMPLING_8
+ * @retval Baud Rate
+ */
+__STATIC_INLINE uint32_t LL_USART_GetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling)
+{
+ register uint32_t usartdiv = 0x0U;
+ register uint32_t brrresult = 0x0U;
+
+ usartdiv = USARTx->BRR;
+
+ if (OverSampling == LL_USART_OVERSAMPLING_8)
+ {
+ if ((usartdiv & 0xFFF7U) != 0U)
+ {
+ usartdiv = (uint16_t)((usartdiv & 0xFFF0U) | ((usartdiv & 0x0007U) << 1U)) ;
+ brrresult = (PeriphClk * 2U) / usartdiv;
+ }
+ }
+ else
+ {
+ if ((usartdiv & 0xFFFFU) != 0U)
+ {
+ brrresult = PeriphClk / usartdiv;
+ }
+ }
+ return (brrresult);
+}
+
+/**
+ * @brief Set Receiver Time Out Value (expressed in nb of bits duration)
+ * @rmtoll RTOR RTO LL_USART_SetRxTimeout
+ * @param USARTx USART Instance
+ * @param Timeout Value between Min_Data=0x00 and Max_Data=0x00FFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetRxTimeout(USART_TypeDef *USARTx, uint32_t Timeout)
+{
+ MODIFY_REG(USARTx->RTOR, USART_RTOR_RTO, Timeout);
+}
+
+/**
+ * @brief Get Receiver Time Out Value (expressed in nb of bits duration)
+ * @rmtoll RTOR RTO LL_USART_GetRxTimeout
+ * @param USARTx USART Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0x00FFFFFF
+ */
+__STATIC_INLINE uint32_t LL_USART_GetRxTimeout(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_RTO));
+}
+
+/**
+ * @brief Set Block Length value in reception
+ * @rmtoll RTOR BLEN LL_USART_SetBlockLength
+ * @param USARTx USART Instance
+ * @param BlockLength Value between Min_Data=0x00 and Max_Data=0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetBlockLength(USART_TypeDef *USARTx, uint32_t BlockLength)
+{
+ MODIFY_REG(USARTx->RTOR, USART_RTOR_BLEN, BlockLength << USART_RTOR_BLEN_Pos);
+}
+
+/**
+ * @brief Get Block Length value in reception
+ * @rmtoll RTOR BLEN LL_USART_GetBlockLength
+ * @param USARTx USART Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0xFF
+ */
+__STATIC_INLINE uint32_t LL_USART_GetBlockLength(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_BLEN) >> USART_RTOR_BLEN_Pos);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_Configuration_IRDA Configuration functions related to Irda feature
+ * @{
+ */
+
+/**
+ * @brief Enable IrDA mode
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll CR3 IREN LL_USART_EnableIrda
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIrda(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_IREN);
+}
+
+/**
+ * @brief Disable IrDA mode
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll CR3 IREN LL_USART_DisableIrda
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIrda(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_IREN);
+}
+
+/**
+ * @brief Indicate if IrDA mode is enabled
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll CR3 IREN LL_USART_IsEnabledIrda
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIrda(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_IREN) == (USART_CR3_IREN));
+}
+
+/**
+ * @brief Configure IrDA Power Mode (Normal or Low Power)
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll CR3 IRLP LL_USART_SetIrdaPowerMode
+ * @param USARTx USART Instance
+ * @param PowerMode This parameter can be one of the following values:
+ * @arg @ref LL_USART_IRDA_POWER_NORMAL
+ * @arg @ref LL_USART_IRDA_POWER_LOW
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetIrdaPowerMode(USART_TypeDef *USARTx, uint32_t PowerMode)
+{
+ MODIFY_REG(USARTx->CR3, USART_CR3_IRLP, PowerMode);
+}
+
+/**
+ * @brief Retrieve IrDA Power Mode configuration (Normal or Low Power)
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll CR3 IRLP LL_USART_GetIrdaPowerMode
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_IRDA_POWER_NORMAL
+ * @arg @ref LL_USART_PHASE_2EDGE
+ */
+__STATIC_INLINE uint32_t LL_USART_GetIrdaPowerMode(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_IRLP));
+}
+
+/**
+ * @brief Set Irda prescaler value, used for dividing the USART clock source
+ * to achieve the Irda Low Power frequency (8 bits value)
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll GTPR PSC LL_USART_SetIrdaPrescaler
+ * @param USARTx USART Instance
+ * @param PrescalerValue Value between Min_Data=0x00 and Max_Data=0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetIrdaPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue)
+{
+ MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, PrescalerValue);
+}
+
+/**
+ * @brief Return Irda prescaler value, used for dividing the USART clock source
+ * to achieve the Irda Low Power frequency (8 bits value)
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll GTPR PSC LL_USART_GetIrdaPrescaler
+ * @param USARTx USART Instance
+ * @retval Irda prescaler value (Value between Min_Data=0x00 and Max_Data=0xFF)
+ */
+__STATIC_INLINE uint32_t LL_USART_GetIrdaPrescaler(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_Configuration_Smartcard Configuration functions related to Smartcard feature
+ * @{
+ */
+
+/**
+ * @brief Enable Smartcard NACK transmission
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 NACK LL_USART_EnableSmartcardNACK
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableSmartcardNACK(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_NACK);
+}
+
+/**
+ * @brief Disable Smartcard NACK transmission
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 NACK LL_USART_DisableSmartcardNACK
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableSmartcardNACK(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_NACK);
+}
+
+/**
+ * @brief Indicate if Smartcard NACK transmission is enabled
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 NACK LL_USART_IsEnabledSmartcardNACK
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcardNACK(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_NACK) == (USART_CR3_NACK));
+}
+
+/**
+ * @brief Enable Smartcard mode
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 SCEN LL_USART_EnableSmartcard
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableSmartcard(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_SCEN);
+}
+
+/**
+ * @brief Disable Smartcard mode
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 SCEN LL_USART_DisableSmartcard
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableSmartcard(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_SCEN);
+}
+
+/**
+ * @brief Indicate if Smartcard mode is enabled
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 SCEN LL_USART_IsEnabledSmartcard
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcard(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_SCEN) == (USART_CR3_SCEN));
+}
+
+/**
+ * @brief Set Smartcard Auto-Retry Count value (SCARCNT[2:0] bits)
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @note This bit-field specifies the number of retries in transmit and receive, in Smartcard mode.
+ * In transmission mode, it specifies the number of automatic retransmission retries, before
+ * generating a transmission error (FE bit set).
+ * In reception mode, it specifies the number or erroneous reception trials, before generating a
+ * reception error (RXNE and PE bits set)
+ * @rmtoll CR3 SCARCNT LL_USART_SetSmartcardAutoRetryCount
+ * @param USARTx USART Instance
+ * @param AutoRetryCount Value between Min_Data=0 and Max_Data=7
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetSmartcardAutoRetryCount(USART_TypeDef *USARTx, uint32_t AutoRetryCount)
+{
+ MODIFY_REG(USARTx->CR3, USART_CR3_SCARCNT, AutoRetryCount << USART_CR3_SCARCNT_Pos);
+}
+
+/**
+ * @brief Return Smartcard Auto-Retry Count value (SCARCNT[2:0] bits)
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 SCARCNT LL_USART_GetSmartcardAutoRetryCount
+ * @param USARTx USART Instance
+ * @retval Smartcard Auto-Retry Count value (Value between Min_Data=0 and Max_Data=7)
+ */
+__STATIC_INLINE uint32_t LL_USART_GetSmartcardAutoRetryCount(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_SCARCNT) >> USART_CR3_SCARCNT_Pos);
+}
+
+/**
+ * @brief Set Smartcard prescaler value, used for dividing the USART clock
+ * source to provide the SMARTCARD Clock (5 bits value)
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll GTPR PSC LL_USART_SetSmartcardPrescaler
+ * @param USARTx USART Instance
+ * @param PrescalerValue Value between Min_Data=0 and Max_Data=31
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetSmartcardPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue)
+{
+ MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, PrescalerValue);
+}
+
+/**
+ * @brief Return Smartcard prescaler value, used for dividing the USART clock
+ * source to provide the SMARTCARD Clock (5 bits value)
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll GTPR PSC LL_USART_GetSmartcardPrescaler
+ * @param USARTx USART Instance
+ * @retval Smartcard prescaler value (Value between Min_Data=0 and Max_Data=31)
+ */
+__STATIC_INLINE uint32_t LL_USART_GetSmartcardPrescaler(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC));
+}
+
+/**
+ * @brief Set Smartcard Guard time value, expressed in nb of baud clocks periods
+ * (GT[7:0] bits : Guard time value)
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll GTPR GT LL_USART_SetSmartcardGuardTime
+ * @param USARTx USART Instance
+ * @param GuardTime Value between Min_Data=0x00 and Max_Data=0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetSmartcardGuardTime(USART_TypeDef *USARTx, uint32_t GuardTime)
+{
+ MODIFY_REG(USARTx->GTPR, USART_GTPR_GT, GuardTime << USART_GTPR_GT_Pos);
+}
+
+/**
+ * @brief Return Smartcard Guard time value, expressed in nb of baud clocks periods
+ * (GT[7:0] bits : Guard time value)
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll GTPR GT LL_USART_GetSmartcardGuardTime
+ * @param USARTx USART Instance
+ * @retval Smartcard Guard time value (Value between Min_Data=0x00 and Max_Data=0xFF)
+ */
+__STATIC_INLINE uint32_t LL_USART_GetSmartcardGuardTime(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_GT) >> USART_GTPR_GT_Pos);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature
+ * @{
+ */
+
+/**
+ * @brief Enable Single Wire Half-Duplex mode
+ * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not
+ * Half-Duplex mode is supported by the USARTx instance.
+ * @rmtoll CR3 HDSEL LL_USART_EnableHalfDuplex
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableHalfDuplex(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_HDSEL);
+}
+
+/**
+ * @brief Disable Single Wire Half-Duplex mode
+ * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not
+ * Half-Duplex mode is supported by the USARTx instance.
+ * @rmtoll CR3 HDSEL LL_USART_DisableHalfDuplex
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableHalfDuplex(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL);
+}
+
+/**
+ * @brief Indicate if Single Wire Half-Duplex mode is enabled
+ * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not
+ * Half-Duplex mode is supported by the USARTx instance.
+ * @rmtoll CR3 HDSEL LL_USART_IsEnabledHalfDuplex
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledHalfDuplex(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_Configuration_LIN Configuration functions related to LIN feature
+ * @{
+ */
+
+/**
+ * @brief Set LIN Break Detection Length
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LBDL LL_USART_SetLINBrkDetectionLen
+ * @param USARTx USART Instance
+ * @param LINBDLength This parameter can be one of the following values:
+ * @arg @ref LL_USART_LINBREAK_DETECT_10B
+ * @arg @ref LL_USART_LINBREAK_DETECT_11B
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetLINBrkDetectionLen(USART_TypeDef *USARTx, uint32_t LINBDLength)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_LBDL, LINBDLength);
+}
+
+/**
+ * @brief Return LIN Break Detection Length
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LBDL LL_USART_GetLINBrkDetectionLen
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_LINBREAK_DETECT_10B
+ * @arg @ref LL_USART_LINBREAK_DETECT_11B
+ */
+__STATIC_INLINE uint32_t LL_USART_GetLINBrkDetectionLen(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBDL));
+}
+
+/**
+ * @brief Enable LIN mode
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LINEN LL_USART_EnableLIN
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableLIN(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR2, USART_CR2_LINEN);
+}
+
+/**
+ * @brief Disable LIN mode
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LINEN LL_USART_DisableLIN
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableLIN(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR2, USART_CR2_LINEN);
+}
+
+/**
+ * @brief Indicate if LIN mode is enabled
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LINEN LL_USART_IsEnabledLIN
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledLIN(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR2, USART_CR2_LINEN) == (USART_CR2_LINEN));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_Configuration_DE Configuration functions related to Driver Enable feature
+ * @{
+ */
+
+/**
+ * @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits).
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR1 DEDT LL_USART_SetDEDeassertionTime
+ * @param USARTx USART Instance
+ * @param Time Value between Min_Data=0 and Max_Data=31
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetDEDeassertionTime(USART_TypeDef *USARTx, uint32_t Time)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_DEDT, Time << USART_CR1_DEDT_Pos);
+}
+
+/**
+ * @brief Return DEDT (Driver Enable De-Assertion Time)
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR1 DEDT LL_USART_GetDEDeassertionTime
+ * @param USARTx USART Instance
+ * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31
+ */
+__STATIC_INLINE uint32_t LL_USART_GetDEDeassertionTime(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEDT) >> USART_CR1_DEDT_Pos);
+}
+
+/**
+ * @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits).
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR1 DEAT LL_USART_SetDEAssertionTime
+ * @param USARTx USART Instance
+ * @param Time Value between Min_Data=0 and Max_Data=31
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetDEAssertionTime(USART_TypeDef *USARTx, uint32_t Time)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_DEAT, Time << USART_CR1_DEAT_Pos);
+}
+
+/**
+ * @brief Return DEAT (Driver Enable Assertion Time)
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR1 DEAT LL_USART_GetDEAssertionTime
+ * @param USARTx USART Instance
+ * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31
+ */
+__STATIC_INLINE uint32_t LL_USART_GetDEAssertionTime(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEAT) >> USART_CR1_DEAT_Pos);
+}
+
+/**
+ * @brief Enable Driver Enable (DE) Mode
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR3 DEM LL_USART_EnableDEMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableDEMode(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_DEM);
+}
+
+/**
+ * @brief Disable Driver Enable (DE) Mode
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR3 DEM LL_USART_DisableDEMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableDEMode(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_DEM);
+}
+
+/**
+ * @brief Indicate if Driver Enable (DE) Mode is enabled
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR3 DEM LL_USART_IsEnabledDEMode
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledDEMode(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_DEM) == (USART_CR3_DEM));
+}
+
+/**
+ * @brief Select Driver Enable Polarity
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR3 DEP LL_USART_SetDESignalPolarity
+ * @param USARTx USART Instance
+ * @param Polarity This parameter can be one of the following values:
+ * @arg @ref LL_USART_DE_POLARITY_HIGH
+ * @arg @ref LL_USART_DE_POLARITY_LOW
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetDESignalPolarity(USART_TypeDef *USARTx, uint32_t Polarity)
+{
+ MODIFY_REG(USARTx->CR3, USART_CR3_DEP, Polarity);
+}
+
+/**
+ * @brief Return Driver Enable Polarity
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR3 DEP LL_USART_GetDESignalPolarity
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_DE_POLARITY_HIGH
+ * @arg @ref LL_USART_DE_POLARITY_LOW
+ */
+__STATIC_INLINE uint32_t LL_USART_GetDESignalPolarity(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_DEP));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_AdvancedConfiguration Advanced Configurations services
+ * @{
+ */
+
+/**
+ * @brief Perform basic configuration of USART for enabling use in Asynchronous Mode (UART)
+ * @note In UART mode, the following bits must be kept cleared:
+ * - LINEN bit in the USART_CR2 register,
+ * - CLKEN bit in the USART_CR2 register,
+ * - SCEN bit in the USART_CR3 register,
+ * - IREN bit in the USART_CR3 register,
+ * - HDSEL bit in the USART_CR3 register.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function
+ * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function
+ * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function
+ * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function
+ * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function
+ * @note Other remaining configurations items related to Asynchronous Mode
+ * (as Baud Rate, Word length, Parity, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 LINEN LL_USART_ConfigAsyncMode\n
+ * CR2 CLKEN LL_USART_ConfigAsyncMode\n
+ * CR3 SCEN LL_USART_ConfigAsyncMode\n
+ * CR3 IREN LL_USART_ConfigAsyncMode\n
+ * CR3 HDSEL LL_USART_ConfigAsyncMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigAsyncMode(USART_TypeDef *USARTx)
+{
+ /* In Asynchronous mode, the following bits must be kept cleared:
+ - LINEN, CLKEN bits in the USART_CR2 register,
+ - SCEN, IREN and HDSEL bits in the USART_CR3 register.*/
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL));
+}
+
+/**
+ * @brief Perform basic configuration of USART for enabling use in Synchronous Mode
+ * @note In Synchronous mode, the following bits must be kept cleared:
+ * - LINEN bit in the USART_CR2 register,
+ * - SCEN bit in the USART_CR3 register,
+ * - IREN bit in the USART_CR3 register,
+ * - HDSEL bit in the USART_CR3 register.
+ * This function also sets the USART in Synchronous mode.
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function
+ * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function
+ * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function
+ * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function
+ * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function
+ * @note Other remaining configurations items related to Synchronous Mode
+ * (as Baud Rate, Word length, Parity, Clock Polarity, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 LINEN LL_USART_ConfigSyncMode\n
+ * CR2 CLKEN LL_USART_ConfigSyncMode\n
+ * CR3 SCEN LL_USART_ConfigSyncMode\n
+ * CR3 IREN LL_USART_ConfigSyncMode\n
+ * CR3 HDSEL LL_USART_ConfigSyncMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigSyncMode(USART_TypeDef *USARTx)
+{
+ /* In Synchronous mode, the following bits must be kept cleared:
+ - LINEN bit in the USART_CR2 register,
+ - SCEN, IREN and HDSEL bits in the USART_CR3 register.*/
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN));
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL));
+ /* set the UART/USART in Synchronous mode */
+ SET_BIT(USARTx->CR2, USART_CR2_CLKEN);
+}
+
+/**
+ * @brief Perform basic configuration of USART for enabling use in LIN Mode
+ * @note In LIN mode, the following bits must be kept cleared:
+ * - STOP and CLKEN bits in the USART_CR2 register,
+ * - SCEN bit in the USART_CR3 register,
+ * - IREN bit in the USART_CR3 register,
+ * - HDSEL bit in the USART_CR3 register.
+ * This function also set the UART/USART in LIN mode.
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function
+ * - Clear STOP in CR2 using @ref LL_USART_SetStopBitsLength() function
+ * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function
+ * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function
+ * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function
+ * - Set LINEN in CR2 using @ref LL_USART_EnableLIN() function
+ * @note Other remaining configurations items related to LIN Mode
+ * (as Baud Rate, Word length, LIN Break Detection Length, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 CLKEN LL_USART_ConfigLINMode\n
+ * CR2 STOP LL_USART_ConfigLINMode\n
+ * CR2 LINEN LL_USART_ConfigLINMode\n
+ * CR3 IREN LL_USART_ConfigLINMode\n
+ * CR3 SCEN LL_USART_ConfigLINMode\n
+ * CR3 HDSEL LL_USART_ConfigLINMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigLINMode(USART_TypeDef *USARTx)
+{
+ /* In LIN mode, the following bits must be kept cleared:
+ - STOP and CLKEN bits in the USART_CR2 register,
+ - IREN, SCEN and HDSEL bits in the USART_CR3 register.*/
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_CLKEN | USART_CR2_STOP));
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL));
+ /* Set the UART/USART in LIN mode */
+ SET_BIT(USARTx->CR2, USART_CR2_LINEN);
+}
+
+/**
+ * @brief Perform basic configuration of USART for enabling use in Half Duplex Mode
+ * @note In Half Duplex mode, the following bits must be kept cleared:
+ * - LINEN bit in the USART_CR2 register,
+ * - CLKEN bit in the USART_CR2 register,
+ * - SCEN bit in the USART_CR3 register,
+ * - IREN bit in the USART_CR3 register,
+ * This function also sets the UART/USART in Half Duplex mode.
+ * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not
+ * Half-Duplex mode is supported by the USARTx instance.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function
+ * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function
+ * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function
+ * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function
+ * - Set HDSEL in CR3 using @ref LL_USART_EnableHalfDuplex() function
+ * @note Other remaining configurations items related to Half Duplex Mode
+ * (as Baud Rate, Word length, Parity, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 LINEN LL_USART_ConfigHalfDuplexMode\n
+ * CR2 CLKEN LL_USART_ConfigHalfDuplexMode\n
+ * CR3 HDSEL LL_USART_ConfigHalfDuplexMode\n
+ * CR3 SCEN LL_USART_ConfigHalfDuplexMode\n
+ * CR3 IREN LL_USART_ConfigHalfDuplexMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigHalfDuplexMode(USART_TypeDef *USARTx)
+{
+ /* In Half Duplex mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - SCEN and IREN bits in the USART_CR3 register.*/
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN));
+ /* set the UART/USART in Half Duplex mode */
+ SET_BIT(USARTx->CR3, USART_CR3_HDSEL);
+}
+
+/**
+ * @brief Perform basic configuration of USART for enabling use in Smartcard Mode
+ * @note In Smartcard mode, the following bits must be kept cleared:
+ * - LINEN bit in the USART_CR2 register,
+ * - IREN bit in the USART_CR3 register,
+ * - HDSEL bit in the USART_CR3 register.
+ * This function also configures Stop bits to 1.5 bits and
+ * sets the USART in Smartcard mode (SCEN bit).
+ * Clock Output is also enabled (CLKEN).
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function
+ * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function
+ * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function
+ * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function
+ * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function
+ * - Set SCEN in CR3 using @ref LL_USART_EnableSmartcard() function
+ * @note Other remaining configurations items related to Smartcard Mode
+ * (as Baud Rate, Word length, Parity, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 LINEN LL_USART_ConfigSmartcardMode\n
+ * CR2 STOP LL_USART_ConfigSmartcardMode\n
+ * CR2 CLKEN LL_USART_ConfigSmartcardMode\n
+ * CR3 HDSEL LL_USART_ConfigSmartcardMode\n
+ * CR3 SCEN LL_USART_ConfigSmartcardMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigSmartcardMode(USART_TypeDef *USARTx)
+{
+ /* In Smartcard mode, the following bits must be kept cleared:
+ - LINEN bit in the USART_CR2 register,
+ - IREN and HDSEL bits in the USART_CR3 register.*/
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN));
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL));
+ /* Configure Stop bits to 1.5 bits */
+ /* Synchronous mode is activated by default */
+ SET_BIT(USARTx->CR2, (USART_CR2_STOP_0 | USART_CR2_STOP_1 | USART_CR2_CLKEN));
+ /* set the UART/USART in Smartcard mode */
+ SET_BIT(USARTx->CR3, USART_CR3_SCEN);
+}
+
+/**
+ * @brief Perform basic configuration of USART for enabling use in Irda Mode
+ * @note In IRDA mode, the following bits must be kept cleared:
+ * - LINEN bit in the USART_CR2 register,
+ * - STOP and CLKEN bits in the USART_CR2 register,
+ * - SCEN bit in the USART_CR3 register,
+ * - HDSEL bit in the USART_CR3 register.
+ * This function also sets the UART/USART in IRDA mode (IREN bit).
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function
+ * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function
+ * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function
+ * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function
+ * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function
+ * - Set IREN in CR3 using @ref LL_USART_EnableIrda() function
+ * @note Other remaining configurations items related to Irda Mode
+ * (as Baud Rate, Word length, Power mode, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 LINEN LL_USART_ConfigIrdaMode\n
+ * CR2 CLKEN LL_USART_ConfigIrdaMode\n
+ * CR2 STOP LL_USART_ConfigIrdaMode\n
+ * CR3 SCEN LL_USART_ConfigIrdaMode\n
+ * CR3 HDSEL LL_USART_ConfigIrdaMode\n
+ * CR3 IREN LL_USART_ConfigIrdaMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigIrdaMode(USART_TypeDef *USARTx)
+{
+ /* In IRDA mode, the following bits must be kept cleared:
+ - LINEN, STOP and CLKEN bits in the USART_CR2 register,
+ - SCEN and HDSEL bits in the USART_CR3 register.*/
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP));
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL));
+ /* set the UART/USART in IRDA mode */
+ SET_BIT(USARTx->CR3, USART_CR3_IREN);
+}
+
+/**
+ * @brief Perform basic configuration of USART for enabling use in Multi processor Mode
+ * (several USARTs connected in a network, one of the USARTs can be the master,
+ * its TX output connected to the RX inputs of the other slaves USARTs).
+ * @note In MultiProcessor mode, the following bits must be kept cleared:
+ * - LINEN bit in the USART_CR2 register,
+ * - CLKEN bit in the USART_CR2 register,
+ * - SCEN bit in the USART_CR3 register,
+ * - IREN bit in the USART_CR3 register,
+ * - HDSEL bit in the USART_CR3 register.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function
+ * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function
+ * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function
+ * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function
+ * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function
+ * @note Other remaining configurations items related to Multi processor Mode
+ * (as Baud Rate, Wake Up Method, Node address, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 LINEN LL_USART_ConfigMultiProcessMode\n
+ * CR2 CLKEN LL_USART_ConfigMultiProcessMode\n
+ * CR3 SCEN LL_USART_ConfigMultiProcessMode\n
+ * CR3 HDSEL LL_USART_ConfigMultiProcessMode\n
+ * CR3 IREN LL_USART_ConfigMultiProcessMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigMultiProcessMode(USART_TypeDef *USARTx)
+{
+ /* In Multi Processor mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - IREN, SCEN and HDSEL bits in the USART_CR3 register.*/
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_FLAG_Management FLAG_Management
+ * @{
+ */
+
+/**
+ * @brief Check if the USART Parity Error Flag is set or not
+ * @rmtoll ISR PE LL_USART_IsActiveFlag_PE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_PE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_PE) == (USART_ISR_PE));
+}
+
+/**
+ * @brief Check if the USART Framing Error Flag is set or not
+ * @rmtoll ISR FE LL_USART_IsActiveFlag_FE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_FE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_FE) == (USART_ISR_FE));
+}
+
+/**
+ * @brief Check if the USART Noise error detected Flag is set or not
+ * @rmtoll ISR NF LL_USART_IsActiveFlag_NE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_NE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_NE) == (USART_ISR_NE));
+}
+
+/**
+ * @brief Check if the USART OverRun Error Flag is set or not
+ * @rmtoll ISR ORE LL_USART_IsActiveFlag_ORE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ORE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_ORE) == (USART_ISR_ORE));
+}
+
+/**
+ * @brief Check if the USART IDLE line detected Flag is set or not
+ * @rmtoll ISR IDLE LL_USART_IsActiveFlag_IDLE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_IDLE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_IDLE) == (USART_ISR_IDLE));
+}
+
+/**
+ * @brief Check if the USART Read Data Register Not Empty Flag is set or not
+ * @rmtoll ISR RXNE LL_USART_IsActiveFlag_RXNE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXNE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_RXNE) == (USART_ISR_RXNE));
+}
+
+/**
+ * @brief Check if the USART Transmission Complete Flag is set or not
+ * @rmtoll ISR TC LL_USART_IsActiveFlag_TC
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TC(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_TC) == (USART_ISR_TC));
+}
+
+/**
+ * @brief Check if the USART Transmit Data Register Empty Flag is set or not
+ * @rmtoll ISR TXE LL_USART_IsActiveFlag_TXE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_TXE) == (USART_ISR_TXE));
+}
+
+/**
+ * @brief Check if the USART LIN Break Detection Flag is set or not
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll ISR LBDF LL_USART_IsActiveFlag_LBD
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_LBD(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_LBDF) == (USART_ISR_LBDF));
+}
+
+/**
+ * @brief Check if the USART CTS interrupt Flag is set or not
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll ISR CTSIF LL_USART_IsActiveFlag_nCTS
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_nCTS(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_CTSIF) == (USART_ISR_CTSIF));
+}
+
+/**
+ * @brief Check if the USART CTS Flag is set or not
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll ISR CTS LL_USART_IsActiveFlag_CTS
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CTS(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_CTS) == (USART_ISR_CTS));
+}
+
+/**
+ * @brief Check if the USART Receiver Time Out Flag is set or not
+ * @rmtoll ISR RTOF LL_USART_IsActiveFlag_RTO
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RTO(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_RTOF) == (USART_ISR_RTOF));
+}
+
+/**
+ * @brief Check if the USART End Of Block Flag is set or not
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll ISR EOBF LL_USART_IsActiveFlag_EOB
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_EOB(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_EOBF) == (USART_ISR_EOBF));
+}
+
+/**
+ * @brief Check if the USART Auto-Baud Rate Error Flag is set or not
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll ISR ABRE LL_USART_IsActiveFlag_ABRE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABRE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_ABRE) == (USART_ISR_ABRE));
+}
+
+/**
+ * @brief Check if the USART Auto-Baud Rate Flag is set or not
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll ISR ABRF LL_USART_IsActiveFlag_ABR
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABR(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_ABRF) == (USART_ISR_ABRF));
+}
+
+/**
+ * @brief Check if the USART Busy Flag is set or not
+ * @rmtoll ISR BUSY LL_USART_IsActiveFlag_BUSY
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_BUSY(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_BUSY) == (USART_ISR_BUSY));
+}
+
+/**
+ * @brief Check if the USART Character Match Flag is set or not
+ * @rmtoll ISR CMF LL_USART_IsActiveFlag_CM
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CM(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_CMF) == (USART_ISR_CMF));
+}
+
+/**
+ * @brief Check if the USART Send Break Flag is set or not
+ * @rmtoll ISR SBKF LL_USART_IsActiveFlag_SBK
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_SBK(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_SBKF) == (USART_ISR_SBKF));
+}
+
+/**
+ * @brief Check if the USART Receive Wake Up from mute mode Flag is set or not
+ * @rmtoll ISR RWU LL_USART_IsActiveFlag_RWU
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RWU(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_RWU) == (USART_ISR_RWU));
+}
+
+
+/**
+ * @brief Check if the USART Transmit Enable Acknowledge Flag is set or not
+ * @rmtoll ISR TEACK LL_USART_IsActiveFlag_TEACK
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TEACK(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_TEACK) == (USART_ISR_TEACK));
+}
+
+
+#if defined(USART_TCBGT_SUPPORT)
+/* Function available only on devices supporting Transmit Complete before Guard Time feature */
+/**
+ * @brief Check if the Smartcard Transmission Complete Before Guard Time Flag is set or not
+ * @rmtoll ISR TCBGT LL_USART_IsActiveFlag_TCBGT
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TCBGT(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_TCBGT) == (USART_ISR_TCBGT));
+}
+#endif
+
+/**
+ * @brief Clear Parity Error Flag
+ * @rmtoll ICR PECF LL_USART_ClearFlag_PE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_PE(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_PECF);
+}
+
+/**
+ * @brief Clear Framing Error Flag
+ * @rmtoll ICR FECF LL_USART_ClearFlag_FE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_FE(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_FECF);
+}
+
+/**
+ * @brief Clear Noise detected Flag
+ * @rmtoll ICR NCF LL_USART_ClearFlag_NE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_NE(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_NCF);
+}
+
+/**
+ * @brief Clear OverRun Error Flag
+ * @rmtoll ICR ORECF LL_USART_ClearFlag_ORE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_ORE(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_ORECF);
+}
+
+/**
+ * @brief Clear IDLE line detected Flag
+ * @rmtoll ICR IDLECF LL_USART_ClearFlag_IDLE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_IDLE(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_IDLECF);
+}
+
+/**
+ * @brief Clear Transmission Complete Flag
+ * @rmtoll ICR TCCF LL_USART_ClearFlag_TC
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_TC(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_TCCF);
+}
+
+#if defined(USART_TCBGT_SUPPORT)
+/* Function available only on devices supporting Transmit Complete before Guard Time feature */
+/**
+ * @brief Clear Smartcard Transmission Complete Before Guard Time Flag
+ * @rmtoll ICR TCBGTCF LL_USART_ClearFlag_TCBGT
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_TCBGT(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_TCBGTCF);
+}
+#endif
+
+/**
+ * @brief Clear LIN Break Detection Flag
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll ICR LBDCF LL_USART_ClearFlag_LBD
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_LBD(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_LBDCF);
+}
+
+/**
+ * @brief Clear CTS Interrupt Flag
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll ICR CTSCF LL_USART_ClearFlag_nCTS
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_nCTS(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_CTSCF);
+}
+
+/**
+ * @brief Clear Receiver Time Out Flag
+ * @rmtoll ICR RTOCF LL_USART_ClearFlag_RTO
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_RTO(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_RTOCF);
+}
+
+/**
+ * @brief Clear End Of Block Flag
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll ICR EOBCF LL_USART_ClearFlag_EOB
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_EOB(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_EOBCF);
+}
+
+/**
+ * @brief Clear Character Match Flag
+ * @rmtoll ICR CMCF LL_USART_ClearFlag_CM
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_CM(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_CMCF);
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_IT_Management IT_Management
+ * @{
+ */
+
+/**
+ * @brief Enable IDLE Interrupt
+ * @rmtoll CR1 IDLEIE LL_USART_EnableIT_IDLE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_IDLEIE);
+}
+
+/**
+ * @brief Enable RX Not Empty Interrupt
+ * @rmtoll CR1 RXNEIE LL_USART_EnableIT_RXNE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_RXNE(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_RXNEIE);
+}
+
+/**
+ * @brief Enable Transmission Complete Interrupt
+ * @rmtoll CR1 TCIE LL_USART_EnableIT_TC
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_TCIE);
+}
+
+/**
+ * @brief Enable TX Empty Interrupt
+ * @rmtoll CR1 TXEIE LL_USART_EnableIT_TXE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_TXE(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_TXEIE);
+}
+
+/**
+ * @brief Enable Parity Error Interrupt
+ * @rmtoll CR1 PEIE LL_USART_EnableIT_PE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_PEIE);
+}
+
+/**
+ * @brief Enable Character Match Interrupt
+ * @rmtoll CR1 CMIE LL_USART_EnableIT_CM
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_CM(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_CMIE);
+}
+
+/**
+ * @brief Enable Receiver Timeout Interrupt
+ * @rmtoll CR1 RTOIE LL_USART_EnableIT_RTO
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_RTO(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_RTOIE);
+}
+
+/**
+ * @brief Enable End Of Block Interrupt
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR1 EOBIE LL_USART_EnableIT_EOB
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_EOB(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_EOBIE);
+}
+
+/**
+ * @brief Enable LIN Break Detection Interrupt
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LBDIE LL_USART_EnableIT_LBD
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_LBD(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR2, USART_CR2_LBDIE);
+}
+
+/**
+ * @brief Enable Error Interrupt
+ * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing
+ * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register).
+ * 0: Interrupt is inhibited
+ * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register.
+ * @rmtoll CR3 EIE LL_USART_EnableIT_ERROR
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_EIE);
+}
+
+/**
+ * @brief Enable CTS Interrupt
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 CTSIE LL_USART_EnableIT_CTS
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_CTSIE);
+}
+
+
+#if defined(USART_TCBGT_SUPPORT)
+/* Function available only on devices supporting Transmit Complete before Guard Time feature */
+/**
+ * @brief Enable Smartcard Transmission Complete Before Guard Time Interrupt
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 TCBGTIE LL_USART_EnableIT_TCBGT
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_TCBGT(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_TCBGTIE);
+}
+#endif
+
+/**
+ * @brief Disable IDLE Interrupt
+ * @rmtoll CR1 IDLEIE LL_USART_DisableIT_IDLE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE);
+}
+
+/**
+ * @brief Disable RX Not Empty Interrupt
+ * @rmtoll CR1 RXNEIE LL_USART_DisableIT_RXNE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_RXNE(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE);
+}
+
+/**
+ * @brief Disable Transmission Complete Interrupt
+ * @rmtoll CR1 TCIE LL_USART_DisableIT_TC
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE);
+}
+
+/**
+ * @brief Disable TX Empty Interrupt
+ * @rmtoll CR1 TXEIE LL_USART_DisableIT_TXE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_TXE(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE);
+}
+
+/**
+ * @brief Disable Parity Error Interrupt
+ * @rmtoll CR1 PEIE LL_USART_DisableIT_PE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE);
+}
+
+/**
+ * @brief Disable Character Match Interrupt
+ * @rmtoll CR1 CMIE LL_USART_DisableIT_CM
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_CM(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_CMIE);
+}
+
+/**
+ * @brief Disable Receiver Timeout Interrupt
+ * @rmtoll CR1 RTOIE LL_USART_DisableIT_RTO
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_RTO(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_RTOIE);
+}
+
+/**
+ * @brief Disable End Of Block Interrupt
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR1 EOBIE LL_USART_DisableIT_EOB
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_EOB(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_EOBIE);
+}
+
+/**
+ * @brief Disable LIN Break Detection Interrupt
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LBDIE LL_USART_DisableIT_LBD
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_LBD(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR2, USART_CR2_LBDIE);
+}
+
+/**
+ * @brief Disable Error Interrupt
+ * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing
+ * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register).
+ * 0: Interrupt is inhibited
+ * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register.
+ * @rmtoll CR3 EIE LL_USART_DisableIT_ERROR
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_EIE);
+}
+
+/**
+ * @brief Disable CTS Interrupt
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 CTSIE LL_USART_DisableIT_CTS
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE);
+}
+
+
+#if defined(USART_TCBGT_SUPPORT)
+/* Function available only on devices supporting Transmit Complete before Guard Time feature */
+/**
+ * @brief Disable Smartcard Transmission Complete Before Guard Time Interrupt
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 TCBGTIE LL_USART_DisableIT_TCBGT
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_TCBGT(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_TCBGTIE);
+}
+#endif
+
+/**
+ * @brief Check if the USART IDLE Interrupt source is enabled or disabled.
+ * @rmtoll CR1 IDLEIE LL_USART_IsEnabledIT_IDLE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_IDLE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE));
+}
+
+/**
+ * @brief Check if the USART RX Not Empty Interrupt is enabled or disabled.
+ * @rmtoll CR1 RXNEIE LL_USART_IsEnabledIT_RXNE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXNE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_RXNEIE) == (USART_CR1_RXNEIE));
+}
+
+/**
+ * @brief Check if the USART Transmission Complete Interrupt is enabled or disabled.
+ * @rmtoll CR1 TCIE LL_USART_IsEnabledIT_TC
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TC(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE));
+}
+
+/**
+ * @brief Check if the USART TX Empty Interrupt is enabled or disabled.
+ * @rmtoll CR1 TXEIE LL_USART_IsEnabledIT_TXE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_TXEIE) == (USART_CR1_TXEIE));
+}
+
+/**
+ * @brief Check if the USART Parity Error Interrupt is enabled or disabled.
+ * @rmtoll CR1 PEIE LL_USART_IsEnabledIT_PE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_PE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE));
+}
+
+/**
+ * @brief Check if the USART Character Match Interrupt is enabled or disabled.
+ * @rmtoll CR1 CMIE LL_USART_IsEnabledIT_CM
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CM(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_CMIE) == (USART_CR1_CMIE));
+}
+
+/**
+ * @brief Check if the USART Receiver Timeout Interrupt is enabled or disabled.
+ * @rmtoll CR1 RTOIE LL_USART_IsEnabledIT_RTO
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RTO(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_RTOIE) == (USART_CR1_RTOIE));
+}
+
+/**
+ * @brief Check if the USART End Of Block Interrupt is enabled or disabled.
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR1 EOBIE LL_USART_IsEnabledIT_EOB
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_EOB(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_EOBIE) == (USART_CR1_EOBIE));
+}
+
+/**
+ * @brief Check if the USART LIN Break Detection Interrupt is enabled or disabled.
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LBDIE LL_USART_IsEnabledIT_LBD
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_LBD(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR2, USART_CR2_LBDIE) == (USART_CR2_LBDIE));
+}
+
+/**
+ * @brief Check if the USART Error Interrupt is enabled or disabled.
+ * @rmtoll CR3 EIE LL_USART_IsEnabledIT_ERROR
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_ERROR(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE));
+}
+
+/**
+ * @brief Check if the USART CTS Interrupt is enabled or disabled.
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 CTSIE LL_USART_IsEnabledIT_CTS
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CTS(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE));
+}
+
+
+#if defined(USART_TCBGT_SUPPORT)
+/* Function available only on devices supporting Transmit Complete before Guard Time feature */
+/**
+ * @brief Check if the Smartcard Transmission Complete Before Guard Time Interrupt is enabled or disabled.
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 TCBGTIE LL_USART_IsEnabledIT_TCBGT
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TCBGT(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_TCBGTIE) == (USART_CR3_TCBGTIE));
+}
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_DMA_Management DMA_Management
+ * @{
+ */
+
+/**
+ * @brief Enable DMA Mode for reception
+ * @rmtoll CR3 DMAR LL_USART_EnableDMAReq_RX
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_DMAR);
+}
+
+/**
+ * @brief Disable DMA Mode for reception
+ * @rmtoll CR3 DMAR LL_USART_DisableDMAReq_RX
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableDMAReq_RX(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR);
+}
+
+/**
+ * @brief Check if DMA Mode is enabled for reception
+ * @rmtoll CR3 DMAR LL_USART_IsEnabledDMAReq_RX
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_RX(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR));
+}
+
+/**
+ * @brief Enable DMA Mode for transmission
+ * @rmtoll CR3 DMAT LL_USART_EnableDMAReq_TX
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_DMAT);
+}
+
+/**
+ * @brief Disable DMA Mode for transmission
+ * @rmtoll CR3 DMAT LL_USART_DisableDMAReq_TX
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableDMAReq_TX(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT);
+}
+
+/**
+ * @brief Check if DMA Mode is enabled for transmission
+ * @rmtoll CR3 DMAT LL_USART_IsEnabledDMAReq_TX
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_TX(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT));
+}
+
+/**
+ * @brief Enable DMA Disabling on Reception Error
+ * @rmtoll CR3 DDRE LL_USART_EnableDMADeactOnRxErr
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableDMADeactOnRxErr(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_DDRE);
+}
+
+/**
+ * @brief Disable DMA Disabling on Reception Error
+ * @rmtoll CR3 DDRE LL_USART_DisableDMADeactOnRxErr
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableDMADeactOnRxErr(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_DDRE);
+}
+
+/**
+ * @brief Indicate if DMA Disabling on Reception Error is disabled
+ * @rmtoll CR3 DDRE LL_USART_IsEnabledDMADeactOnRxErr
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledDMADeactOnRxErr(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_DDRE) == (USART_CR3_DDRE));
+}
+
+/**
+ * @brief Get the data register address used for DMA transfer
+ * @rmtoll RDR RDR LL_USART_DMA_GetRegAddr\n
+ * @rmtoll TDR TDR LL_USART_DMA_GetRegAddr
+ * @param USARTx USART Instance
+ * @param Direction This parameter can be one of the following values:
+ * @arg @ref LL_USART_DMA_REG_DATA_TRANSMIT
+ * @arg @ref LL_USART_DMA_REG_DATA_RECEIVE
+ * @retval Address of data register
+ */
+__STATIC_INLINE uint32_t LL_USART_DMA_GetRegAddr(USART_TypeDef *USARTx, uint32_t Direction)
+{
+ register uint32_t data_reg_addr = 0U;
+
+ if (Direction == LL_USART_DMA_REG_DATA_TRANSMIT)
+ {
+ /* return address of TDR register */
+ data_reg_addr = (uint32_t) &(USARTx->TDR);
+ }
+ else
+ {
+ /* return address of RDR register */
+ data_reg_addr = (uint32_t) &(USARTx->RDR);
+ }
+
+ return data_reg_addr;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_Data_Management Data_Management
+ * @{
+ */
+
+/**
+ * @brief Read Receiver Data register (Receive Data value, 8 bits)
+ * @rmtoll RDR RDR LL_USART_ReceiveData8
+ * @param USARTx USART Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0xFF
+ */
+__STATIC_INLINE uint8_t LL_USART_ReceiveData8(USART_TypeDef *USARTx)
+{
+ return (uint8_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR));
+}
+
+/**
+ * @brief Read Receiver Data register (Receive Data value, 9 bits)
+ * @rmtoll RDR RDR LL_USART_ReceiveData9
+ * @param USARTx USART Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0x1FF
+ */
+__STATIC_INLINE uint16_t LL_USART_ReceiveData9(USART_TypeDef *USARTx)
+{
+ return (uint16_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR));
+}
+
+/**
+ * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits)
+ * @rmtoll TDR TDR LL_USART_TransmitData8
+ * @param USARTx USART Instance
+ * @param Value between Min_Data=0x00 and Max_Data=0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_TransmitData8(USART_TypeDef *USARTx, uint8_t Value)
+{
+ USARTx->TDR = Value;
+}
+
+/**
+ * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits)
+ * @rmtoll TDR TDR LL_USART_TransmitData9
+ * @param USARTx USART Instance
+ * @param Value between Min_Data=0x00 and Max_Data=0x1FF
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_TransmitData9(USART_TypeDef *USARTx, uint16_t Value)
+{
+ USARTx->TDR = Value & 0x1FFU;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_Execution Execution
+ * @{
+ */
+
+/**
+ * @brief Request an Automatic Baud Rate measurement on next received data frame
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll RQR ABRRQ LL_USART_RequestAutoBaudRate
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_RequestAutoBaudRate(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->RQR, USART_RQR_ABRRQ);
+}
+
+/**
+ * @brief Request Break sending
+ * @rmtoll RQR SBKRQ LL_USART_RequestBreakSending
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_RequestBreakSending(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->RQR, USART_RQR_SBKRQ);
+}
+
+/**
+ * @brief Put USART in mute mode and set the RWU flag
+ * @rmtoll RQR MMRQ LL_USART_RequestEnterMuteMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_RequestEnterMuteMode(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->RQR, USART_RQR_MMRQ);
+}
+
+/**
+ * @brief Request a Receive Data flush
+ * @rmtoll RQR RXFRQ LL_USART_RequestRxDataFlush
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_RequestRxDataFlush(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->RQR, USART_RQR_RXFRQ);
+}
+
+/**
+ * @brief Request a Transmit data flush
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll RQR TXFRQ LL_USART_RequestTxDataFlush
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_RequestTxDataFlush(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->RQR, USART_RQR_TXFRQ);
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup USART_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+ErrorStatus LL_USART_DeInit(USART_TypeDef *USARTx);
+ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_InitStruct);
+void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct);
+ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, LL_USART_ClockInitTypeDef *USART_ClockInitStruct);
+void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct);
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* USART1 || USART2 || USART3 || USART6 || UART4 || UART5 || UART7 || UART8 */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_LL_USART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h
new file mode 100644
index 00000000..3d70e1c7
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h
@@ -0,0 +1,321 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_ll_utils.h
+ * @author MCD Application Team
+ * @brief Header file of UTILS LL module.
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The LL UTILS driver contains a set of generic APIs that can be
+ used by user:
+ (+) Device electronic signature
+ (+) Timing functions
+ (+) PLL configuration functions
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_LL_UTILS_H
+#define __STM32F7xx_LL_UTILS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx.h"
+
+/** @addtogroup STM32F7xx_LL_Driver
+ * @{
+ */
+
+/** @defgroup UTILS_LL UTILS
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants
+ * @{
+ */
+
+/* Max delay can be used in LL_mDelay */
+#define LL_MAX_DELAY 0xFFFFFFFFU
+
+/**
+ * @brief Unique device ID register base address
+ */
+#define UID_BASE_ADDRESS UID_BASE
+
+/**
+ * @brief Flash size data register base address
+ */
+#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE
+
+/**
+ * @brief Package data register base address
+ */
+#define PACKAGE_BASE_ADDRESS PACKAGE_BASE
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures
+ * @{
+ */
+/**
+ * @brief UTILS PLL structure definition
+ */
+typedef struct
+{
+ uint32_t PLLM; /*!< Division factor for PLL VCO input clock.
+ This parameter can be a value of @ref RCC_LL_EC_PLLM_DIV
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RCC_PLL_ConfigDomain_SYS(). */
+
+ uint32_t PLLN; /*!< Multiplication factor for PLL VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RCC_PLL_ConfigDomain_SYS(). */
+
+ uint32_t PLLP; /*!< Division for the main system clock.
+ This parameter can be a value of @ref RCC_LL_EC_PLLP_DIV
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RCC_PLL_ConfigDomain_SYS(). */
+} LL_UTILS_PLLInitTypeDef;
+
+/**
+ * @brief UTILS System, AHB and APB buses clock configuration structure definition
+ */
+typedef struct
+{
+ uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+ This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RCC_SetAHBPrescaler(). */
+
+ uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_LL_EC_APB1_DIV
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RCC_SetAPB1Prescaler(). */
+
+ uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_LL_EC_APB2_DIV
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RCC_SetAPB2Prescaler(). */
+
+} LL_UTILS_ClkInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants
+ * @{
+ */
+
+/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation
+ * @{
+ */
+#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */
+#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */
+/**
+ * @}
+ */
+
+/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE
+ * @{
+ */
+#define LL_UTILS_PACKAGETYPE_LQFP100 0x00000100U /*!< LQFP100 package type */
+#define LL_UTILS_PACKAGETYPE_LQFP144_WLCSP143 0x00000200U /*!< LQFP144 or WLCSP143 package type */
+#define LL_UTILS_PACKAGETYPE_WLCSP180_LQFP176_UFBGA176 0x00000300U /*!< WLCSP180, LQFP176 or UFBGA176 package type */
+#define LL_UTILS_PACKAGETYPE_LQFP176_LQFP208_TFBGA216 0x00000400U /*!< LQFP176, LQFP208 or TFBGA216 package type */
+#define LL_UTILS_PACKAGETYPE_TFBGA216_LQFP176_LQFP208 0x00000500U /*!< LQFP176, LQFP208 or TFBGA216 package type */
+#define LL_UTILS_PACKAGETYPE_LQFP176_TFBGA216_LQFP208 0x00000600U /*!< LQFP176, LQFP208 or TFBGA216 package type */
+#define LL_UTILS_PACKAGETYPE_LQFP208_LQFP176_TFBGA216 0x00000700U /*!< LQFP176, LQFP208 or TFBGA216 package type */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions
+ * @{
+ */
+
+/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE
+ * @{
+ */
+
+/**
+ * @brief Get Word0 of the unique device identifier (UID based on 96 bits)
+ * @retval UID[31:0]
+ */
+__STATIC_INLINE uint32_t LL_GetUID_Word0(void)
+{
+ return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS)));
+}
+
+/**
+ * @brief Get Word1 of the unique device identifier (UID based on 96 bits)
+ * @retval UID[63:32]
+ */
+__STATIC_INLINE uint32_t LL_GetUID_Word1(void)
+{
+ return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U))));
+}
+
+/**
+ * @brief Get Word2 of the unique device identifier (UID based on 96 bits)
+ * @retval UID[95:64]
+ */
+__STATIC_INLINE uint32_t LL_GetUID_Word2(void)
+{
+ return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U))));
+}
+
+/**
+ * @brief Get Flash memory size
+ * @note This bitfield indicates the size of the device Flash memory expressed in
+ * Kbytes. As an example, 0x040 corresponds to 64 Kbytes.
+ * @retval FLASH_SIZE[15:0]: Flash memory size
+ */
+__STATIC_INLINE uint32_t LL_GetFlashSize(void)
+{
+ return (uint32_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)) & 0xFFFFU);
+}
+
+/**
+ * @brief Get Package type
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_UTILS_PACKAGETYPE_LQFP100
+ * @arg @ref LL_UTILS_PACKAGETYPE_LQFP144_WLCSP143 (*)
+ * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP180_LQFP176_UFBGA176 (*)
+ * @arg @ref LL_UTILS_PACKAGETYPE_LQFP176_LQFP208_TFBGA216 (*)
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_GetPackageType(void)
+{
+ return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0x0700U);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup UTILS_LL_EF_DELAY DELAY
+ * @{
+ */
+
+/**
+ * @brief This function configures the Cortex-M SysTick source of the time base.
+ * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro)
+ * @note When a RTOS is used, it is recommended to avoid changing the SysTick
+ * configuration by calling this function, for a delay use rather osDelay RTOS service.
+ * @param Ticks Number of ticks
+ * @retval None
+ */
+__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks)
+{
+ /* Configure the SysTick to have interrupt in 1ms time base */
+ SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */
+}
+
+void LL_Init1msTick(uint32_t HCLKFrequency);
+void LL_mDelay(uint32_t Delay);
+
+/**
+ * @}
+ */
+
+/** @defgroup UTILS_EF_SYSTEM SYSTEM
+ * @{
+ */
+
+void LL_SetSystemCoreClock(uint32_t HCLKFrequency);
+ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
+ LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
+ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass,
+ LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_LL_UTILS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c
new file mode 100644
index 00000000..c280e154
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c
@@ -0,0 +1,624 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal.c
+ * @author MCD Application Team
+ * @brief HAL module driver.
+ * This is the common part of the HAL initialization
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The common HAL driver contains a set of generic and common APIs that can be
+ used by the PPP peripheral drivers and the user to start using the HAL.
+ [..]
+ The HAL contains two APIs' categories:
+ (+) Common HAL APIs
+ (+) Services HAL APIs
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup HAL HAL
+ * @brief HAL module driver.
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup HAL_Private_Constants
+ * @{
+ */
+/**
+ * @brief STM32F7xx HAL Driver version number V1.2.5
+ */
+#define __STM32F7xx_HAL_VERSION_MAIN (0x01) /*!< [31:24] main version */
+#define __STM32F7xx_HAL_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */
+#define __STM32F7xx_HAL_VERSION_SUB2 (0x05) /*!< [15:8] sub2 version */
+#define __STM32F7xx_HAL_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F7xx_HAL_VERSION ((__STM32F7xx_HAL_VERSION_MAIN << 24)\
+ |(__STM32F7xx_HAL_VERSION_SUB1 << 16)\
+ |(__STM32F7xx_HAL_VERSION_SUB2 << 8 )\
+ |(__STM32F7xx_HAL_VERSION_RC))
+
+#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup HAL_Private_Variables
+ * @{
+ */
+__IO uint32_t uwTick;
+uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */
+HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Functions HAL Exported Functions
+ * @{
+ */
+
+/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initializes the Flash interface the NVIC allocation and initial clock
+ configuration. It initializes the systick also when timeout is needed
+ and the backup domain when enabled.
+ (+) De-Initializes common part of the HAL.
+ (+) Configure the time base source to have 1ms time base with a dedicated
+ Tick interrupt priority.
+ (++) SysTick timer is used by default as source of time base, but user
+ can eventually implement his proper time base source (a general purpose
+ timer for example or other time source), keeping in mind that Time base
+ duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
+ handled in milliseconds basis.
+ (++) Time base configuration function (HAL_InitTick ()) is called automatically
+ at the beginning of the program after reset by HAL_Init() or at any time
+ when clock is configured, by HAL_RCC_ClockConfig().
+ (++) Source of time base is configured to generate interrupts at regular
+ time intervals. Care must be taken if HAL_Delay() is called from a
+ peripheral ISR process, the Tick interrupt line must have higher priority
+ (numerically lower) than the peripheral interrupt. Otherwise the caller
+ ISR process will be blocked.
+ (++) functions affecting time base configurations are declared as __weak
+ to make override possible in case of other implementations in user file.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function is used to initialize the HAL Library; it must be the first
+ * instruction to be executed in the main program (before to call any other
+ * HAL function), it performs the following:
+ * Configure the Flash prefetch, and instruction cache through ART accelerator.
+ * Configures the SysTick to generate an interrupt each 1 millisecond,
+ * which is clocked by the HSI (at this stage, the clock is not yet
+ * configured and thus the system is running from the internal HSI at 16 MHz).
+ * Set NVIC Group Priority to 4.
+ * Calls the HAL_MspInit() callback function defined in user file
+ * "stm32f7xx_hal_msp.c" to do the global low level hardware initialization
+ *
+ * @note SysTick is used as time base for the HAL_Delay() function, the application
+ * need to ensure that the SysTick time base is always set to 1 millisecond
+ * to have correct HAL operation.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_Init(void)
+{
+ /* Configure Instruction cache through ART accelerator */
+#if (ART_ACCLERATOR_ENABLE != 0)
+ __HAL_FLASH_ART_ENABLE();
+#endif /* ART_ACCLERATOR_ENABLE */
+
+ /* Configure Flash prefetch */
+#if (PREFETCH_ENABLE != 0U)
+ __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
+#endif /* PREFETCH_ENABLE */
+
+ /* Set Interrupt Group Priority */
+ HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+
+ /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */
+ HAL_InitTick(TICK_INT_PRIORITY);
+
+ /* Init the low level hardware */
+ HAL_MspInit();
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief This function de-Initializes common part of the HAL and stops the systick.
+ * This function is optional.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DeInit(void)
+{
+ /* Reset of all peripherals */
+ __HAL_RCC_APB1_FORCE_RESET();
+ __HAL_RCC_APB1_RELEASE_RESET();
+
+ __HAL_RCC_APB2_FORCE_RESET();
+ __HAL_RCC_APB2_RELEASE_RESET();
+
+ __HAL_RCC_AHB1_FORCE_RESET();
+ __HAL_RCC_AHB1_RELEASE_RESET();
+
+ __HAL_RCC_AHB2_FORCE_RESET();
+ __HAL_RCC_AHB2_RELEASE_RESET();
+
+ __HAL_RCC_AHB3_FORCE_RESET();
+ __HAL_RCC_AHB3_RELEASE_RESET();
+
+ /* De-Init the low level hardware */
+ HAL_MspDeInit();
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the MSP.
+ * @retval None
+ */
+__weak void HAL_MspInit(void)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the MSP.
+ * @retval None
+ */
+__weak void HAL_MspDeInit(void)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function configures the source of the time base.
+ * The time source is configured to have 1ms time base with a dedicated
+ * Tick interrupt priority.
+ * @note This function is called automatically at the beginning of program after
+ * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig().
+ * @note In the default implementation, SysTick timer is the source of time base.
+ * It is used to generate interrupts at regular time intervals.
+ * Care must be taken if HAL_Delay() is called from a peripheral ISR process,
+ * The SysTick interrupt must have higher priority (numerically lower)
+ * than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
+ * The function is declared as __weak to be overwritten in case of other
+ * implementation in user file.
+ * @param TickPriority Tick interrupt priority.
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
+{
+ /* Configure the SysTick to have interrupt in 1ms time basis*/
+ if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Configure the SysTick IRQ priority */
+ if (TickPriority < (1UL << __NVIC_PRIO_BITS))
+ {
+ HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U);
+ uwTickPrio = TickPriority;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions
+ * @brief HAL Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### HAL Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Provide a tick value in millisecond
+ (+) Provide a blocking delay in millisecond
+ (+) Suspend the time base source interrupt
+ (+) Resume the time base source interrupt
+ (+) Get the HAL API driver version
+ (+) Get the device identifier
+ (+) Get the device revision identifier
+ (+) Enable/Disable Debug module during SLEEP mode
+ (+) Enable/Disable Debug module during STOP mode
+ (+) Enable/Disable Debug module during STANDBY mode
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function is called to increment a global variable "uwTick"
+ * used as application time base.
+ * @note In the default implementation, this variable is incremented each 1ms
+ * in SysTick ISR.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval None
+ */
+__weak void HAL_IncTick(void)
+{
+ uwTick += uwTickFreq;
+}
+
+/**
+ * @brief Provides a tick value in millisecond.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval tick value
+ */
+__weak uint32_t HAL_GetTick(void)
+{
+ return uwTick;
+}
+
+/**
+ * @brief This function returns a tick priority.
+ * @retval tick priority
+ */
+uint32_t HAL_GetTickPrio(void)
+{
+ return uwTickPrio;
+}
+
+/**
+ * @brief Set new tick Freq.
+ * @retval Status
+ */
+HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ assert_param(IS_TICKFREQ(Freq));
+
+ if (uwTickFreq != Freq)
+ {
+ uwTickFreq = Freq;
+
+ /* Apply the new tick Freq */
+ status = HAL_InitTick(uwTickPrio);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Return tick frequency.
+ * @retval tick period in Hz
+ */
+HAL_TickFreqTypeDef HAL_GetTickFreq(void)
+{
+ return uwTickFreq;
+}
+
+/**
+ * @brief This function provides minimum delay (in milliseconds) based
+ * on variable incremented.
+ * @note In the default implementation , SysTick timer is the source of time base.
+ * It is used to generate interrupts at regular time intervals where uwTick
+ * is incremented.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @param Delay specifies the delay time length, in milliseconds.
+ * @retval None
+ */
+__weak void HAL_Delay(uint32_t Delay)
+{
+ uint32_t tickstart = HAL_GetTick();
+ uint32_t wait = Delay;
+
+ /* Add a freq to guarantee minimum wait */
+ if (wait < HAL_MAX_DELAY)
+ {
+ wait += (uint32_t)(uwTickFreq);
+ }
+
+ while ((HAL_GetTick() - tickstart) < wait)
+ {
+ }
+}
+
+/**
+ * @brief Suspend Tick increment.
+ * @note In the default implementation , SysTick timer is the source of time base. It is
+ * used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
+ * is called, the SysTick interrupt will be disabled and so Tick increment
+ * is suspended.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval None
+ */
+__weak void HAL_SuspendTick(void)
+{
+ /* Disable SysTick Interrupt */
+ SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk;
+}
+
+/**
+ * @brief Resume Tick increment.
+ * @note In the default implementation , SysTick timer is the source of time base. It is
+ * used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
+ * is called, the SysTick interrupt will be enabled and so Tick increment
+ * is resumed.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval None
+ */
+__weak void HAL_ResumeTick(void)
+{
+ /* Enable SysTick Interrupt */
+ SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk;
+}
+
+/**
+ * @brief Returns the HAL revision
+ * @retval version : 0xXYZR (8bits for each decimal, R for RC)
+ */
+uint32_t HAL_GetHalVersion(void)
+{
+ return __STM32F7xx_HAL_VERSION;
+}
+
+/**
+ * @brief Returns the device revision identifier.
+ * @retval Device revision identifier
+ */
+uint32_t HAL_GetREVID(void)
+{
+ return((DBGMCU->IDCODE) >> 16U);
+}
+
+/**
+ * @brief Returns the device identifier.
+ * @retval Device identifier
+ */
+uint32_t HAL_GetDEVID(void)
+{
+ return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
+}
+
+/**
+ * @brief Returns first word of the unique device identifier (UID based on 96 bits)
+ * @retval Device identifier
+ */
+uint32_t HAL_GetUIDw0(void)
+{
+ return(READ_REG(*((uint32_t *)UID_BASE)));
+}
+
+/**
+ * @brief Returns second word of the unique device identifier (UID based on 96 bits)
+ * @retval Device identifier
+ */
+uint32_t HAL_GetUIDw1(void)
+{
+ return(READ_REG(*((uint32_t *)(UID_BASE + 4U))));
+}
+
+/**
+ * @brief Returns third word of the unique device identifier (UID based on 96 bits)
+ * @retval Device identifier
+ */
+uint32_t HAL_GetUIDw2(void)
+{
+ return(READ_REG(*((uint32_t *)(UID_BASE + 8U))));
+}
+
+/**
+ * @brief Enable the Debug Module during SLEEP mode
+ * @retval None
+ */
+void HAL_DBGMCU_EnableDBGSleepMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+ * @brief Disable the Debug Module during SLEEP mode
+ * @retval None
+ */
+void HAL_DBGMCU_DisableDBGSleepMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+ * @brief Enable the Debug Module during STOP mode
+ * @retval None
+ */
+void HAL_DBGMCU_EnableDBGStopMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+ * @brief Disable the Debug Module during STOP mode
+ * @retval None
+ */
+void HAL_DBGMCU_DisableDBGStopMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+ * @brief Enable the Debug Module during STANDBY mode
+ * @retval None
+ */
+void HAL_DBGMCU_EnableDBGStandbyMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+ * @brief Disable the Debug Module during STANDBY mode
+ * @retval None
+ */
+void HAL_DBGMCU_DisableDBGStandbyMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+ * @brief Enables the I/O Compensation Cell.
+ * @note The I/O compensation cell can be used only when the device supply
+ * voltage ranges from 2.4 to 3.6 V.
+ * @retval None
+ */
+void HAL_EnableCompensationCell(void)
+{
+ SYSCFG->CMPCR |= SYSCFG_CMPCR_CMP_PD;
+}
+
+/**
+ * @brief Power-down the I/O Compensation Cell.
+ * @note The I/O compensation cell can be used only when the device supply
+ * voltage ranges from 2.4 to 3.6 V.
+ * @retval None
+ */
+void HAL_DisableCompensationCell(void)
+{
+ SYSCFG->CMPCR &= (uint32_t)~((uint32_t)SYSCFG_CMPCR_CMP_PD);
+}
+
+/**
+ * @brief Enables the FMC Memory Mapping Swapping.
+ *
+ * @note SDRAM is accessible at 0x60000000
+ * and NOR/RAM is accessible at 0xC0000000
+ *
+ * @retval None
+ */
+void HAL_EnableFMCMemorySwapping(void)
+{
+ SYSCFG->MEMRMP |= SYSCFG_MEMRMP_SWP_FMC_0;
+}
+
+/**
+ * @brief Disables the FMC Memory Mapping Swapping
+ *
+ * @note SDRAM is accessible at 0xC0000000 (default mapping)
+ * and NOR/RAM is accessible at 0x60000000 (default mapping)
+ *
+ * @retval None
+ */
+void HAL_DisableFMCMemorySwapping(void)
+{
+
+ SYSCFG->MEMRMP &= (uint32_t)~((uint32_t)SYSCFG_MEMRMP_SWP_FMC);
+}
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/**
+* @brief Enable the Internal FLASH Bank Swapping.
+*
+* @note This function can be used only for STM32F77xx/STM32F76xx devices.
+*
+* @note Flash Bank2 mapped at 0x08000000 (AXI) (aliased at 0x00200000 (TCM))
+* and Flash Bank1 mapped at 0x08100000 (AXI) (aliased at 0x00300000 (TCM))
+*
+* @retval None
+*/
+void HAL_EnableMemorySwappingBank(void)
+{
+ SET_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FB);
+}
+
+/**
+* @brief Disable the Internal FLASH Bank Swapping.
+*
+* @note This function can be used only for STM32F77xx/STM32F76xx devices.
+*
+* @note The default state : Flash Bank1 mapped at 0x08000000 (AXI) (aliased at 0x00200000 (TCM))
+* and Flash Bank2 mapped at 0x08100000 (AXI)( aliased at 0x00300000 (TCM))
+*
+* @retval None
+*/
+void HAL_DisableMemorySwappingBank(void)
+{
+ CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FB);
+}
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c
new file mode 100644
index 00000000..de5aeb87
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c
@@ -0,0 +1,521 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_cortex.c
+ * @author MCD Application Team
+ * @brief CORTEX HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the CORTEX:
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+
+ [..]
+ *** How to configure Interrupts using CORTEX HAL driver ***
+ ===========================================================
+ [..]
+ This section provides functions allowing to configure the NVIC interrupts (IRQ).
+ The Cortex-M4 exceptions are managed by CMSIS functions.
+
+ (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping()
+ function according to the following table.
+ (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority().
+ (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ().
+ (#) please refer to programming manual for details in how to configure priority.
+
+ -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ preemption is no more possible.
+ The pending IRQ priority will be managed only by the sub priority.
+
+ -@- IRQ priority order (sorted by highest to lowest priority):
+ (+@) Lowest preemption priority
+ (+@) Lowest sub priority
+ (+@) Lowest hardware priority (IRQ number)
+
+ [..]
+ *** How to configure Systick using CORTEX HAL driver ***
+ ========================================================
+ [..]
+ Setup SysTick Timer for time base.
+
+ (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which
+ is a CMSIS function that:
+ (++) Configures the SysTick Reload register with value passed as function parameter.
+ (++) Configures the SysTick IRQ priority to the lowest value (0x0F).
+ (++) Resets the SysTick Counter register.
+ (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
+ (++) Enables the SysTick Interrupt.
+ (++) Starts the SysTick Counter.
+
+ (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
+ __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
+ HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined
+ inside the stm32f7xx_hal_cortex.h file.
+
+ (+) You can change the SysTick IRQ priority by calling the
+ HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function
+ call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
+
+ (+) To adjust the SysTick time base, use the following formula:
+
+ Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s)
+ (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
+ (++) Reload Value should not exceed 0xFFFFFF
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup CORTEX CORTEX
+ * @brief CORTEX HAL module driver
+ * @{
+ */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
+ * @{
+ */
+
+
+/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides the CORTEX HAL driver functions allowing to configure Interrupts
+ Systick functionalities
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Sets the priority grouping field (preemption priority and subpriority)
+ * using the required unlock sequence.
+ * @param PriorityGroup The priority grouping bits length.
+ * This parameter can be one of the following values:
+ * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
+ * 4 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
+ * 3 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
+ * 2 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
+ * 1 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
+ * 0 bits for subpriority
+ * @note When the NVIC_PriorityGroup_0 is selected, IRQ preemption is no more possible.
+ * The pending IRQ priority will be managed only by the subpriority.
+ * @retval None
+ */
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+
+ /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */
+ NVIC_SetPriorityGrouping(PriorityGroup);
+}
+
+/**
+ * @brief Sets the priority of an interrupt.
+ * @param IRQn External interrupt number.
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+ * @param PreemptPriority The preemption priority for the IRQn channel.
+ * This parameter can be a value between 0 and 15
+ * A lower priority value indicates a higher priority
+ * @param SubPriority the subpriority level for the IRQ channel.
+ * This parameter can be a value between 0 and 15
+ * A lower priority value indicates a higher priority.
+ * @retval None
+ */
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t prioritygroup = 0x00;
+
+ /* Check the parameters */
+ assert_param(IS_NVIC_SUB_PRIORITY(SubPriority));
+ assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
+
+ prioritygroup = NVIC_GetPriorityGrouping();
+
+ NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority));
+}
+
+/**
+ * @brief Enables a device specific interrupt in the NVIC interrupt controller.
+ * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
+ * function should be called before.
+ * @param IRQn External interrupt number.
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Enable interrupt */
+ NVIC_EnableIRQ(IRQn);
+}
+
+/**
+ * @brief Disables a device specific interrupt in the NVIC interrupt controller.
+ * @param IRQn External interrupt number.
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Disable interrupt */
+ NVIC_DisableIRQ(IRQn);
+}
+
+/**
+ * @brief Initiates a system reset request to reset the MCU.
+ * @retval None
+ */
+void HAL_NVIC_SystemReset(void)
+{
+ /* System Reset */
+ NVIC_SystemReset();
+}
+
+/**
+ * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ * Counter is in free running mode to generate periodic interrupts.
+ * @param TicksNumb Specifies the ticks Number of ticks between two interrupts.
+ * @retval status: - 0 Function succeeded.
+ * - 1 Function failed.
+ */
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
+{
+ return SysTick_Config(TicksNumb);
+}
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
+ * @brief Cortex control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the CORTEX
+ (NVIC, SYSTICK, MPU) functionalities.
+
+
+@endverbatim
+ * @{
+ */
+
+#if (__MPU_PRESENT == 1)
+/**
+ * @brief Disables the MPU
+ * @retval None
+ */
+void HAL_MPU_Disable(void)
+{
+ /* Make sure outstanding transfers are done */
+ __DMB();
+
+ /* Disable fault exceptions */
+ SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+
+ /* Disable the MPU and clear the control register*/
+ MPU->CTRL = 0;
+}
+
+/**
+ * @brief Enables the MPU
+ * @param MPU_Control Specifies the control mode of the MPU during hard fault,
+ * NMI, FAULTMASK and privileged access to the default memory
+ * This parameter can be one of the following values:
+ * @arg MPU_HFNMI_PRIVDEF_NONE
+ * @arg MPU_HARDFAULT_NMI
+ * @arg MPU_PRIVILEGED_DEFAULT
+ * @arg MPU_HFNMI_PRIVDEF
+ * @retval None
+ */
+void HAL_MPU_Enable(uint32_t MPU_Control)
+{
+ /* Enable the MPU */
+ MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
+
+ /* Enable fault exceptions */
+ SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+
+ /* Ensure MPU setting take effects */
+ __DSB();
+ __ISB();
+}
+
+/**
+ * @brief Initializes and configures the Region and the memory to be protected.
+ * @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains
+ * the initialization and configuration information.
+ * @retval None
+ */
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init)
+{
+ /* Check the parameters */
+ assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number));
+ assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable));
+
+ /* Set the Region number */
+ MPU->RNR = MPU_Init->Number;
+
+ if ((MPU_Init->Enable) != RESET)
+ {
+ /* Check the parameters */
+ assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec));
+ assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission));
+ assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField));
+ assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable));
+ assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable));
+ assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable));
+ assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable));
+ assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size));
+
+ MPU->RBAR = MPU_Init->BaseAddress;
+ MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) |
+ ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) |
+ ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) |
+ ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) |
+ ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) |
+ ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) |
+ ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) |
+ ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) |
+ ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos);
+ }
+ else
+ {
+ MPU->RBAR = 0x00;
+ MPU->RASR = 0x00;
+ }
+}
+#endif /* __MPU_PRESENT */
+
+/**
+ * @brief Gets the priority grouping field from the NVIC Interrupt Controller.
+ * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field)
+ */
+uint32_t HAL_NVIC_GetPriorityGrouping(void)
+{
+ /* Get the PRIGROUP[10:8] field value */
+ return NVIC_GetPriorityGrouping();
+}
+
+/**
+ * @brief Gets the priority of an interrupt.
+ * @param IRQn External interrupt number.
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+ * @param PriorityGroup the priority grouping bits length.
+ * This parameter can be one of the following values:
+ * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
+ * 4 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
+ * 3 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
+ * 2 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
+ * 1 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
+ * 0 bits for subpriority
+ * @param pPreemptPriority Pointer on the Preemptive priority value (starting from 0).
+ * @param pSubPriority Pointer on the Subpriority value (starting from 0).
+ * @retval None
+ */
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+ /* Get priority for Cortex-M system or device specific interrupts */
+ NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority);
+}
+
+/**
+ * @brief Sets Pending bit of an external interrupt.
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Set interrupt pending */
+ NVIC_SetPendingIRQ(IRQn);
+}
+
+/**
+ * @brief Gets Pending Interrupt (reads the pending register in the NVIC
+ * and returns the pending bit for the specified interrupt).
+ * @param IRQn External interrupt number.
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+ * @retval status: - 0 Interrupt status is not pending.
+ * - 1 Interrupt status is pending.
+ */
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Return 1 if pending else 0 */
+ return NVIC_GetPendingIRQ(IRQn);
+}
+
+/**
+ * @brief Clears the pending bit of an external interrupt.
+ * @param IRQn External interrupt number.
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Clear pending interrupt */
+ NVIC_ClearPendingIRQ(IRQn);
+}
+
+/**
+ * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit).
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+ * @retval status: - 0 Interrupt status is not pending.
+ * - 1 Interrupt status is pending.
+ */
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Return 1 if active else 0 */
+ return NVIC_GetActive(IRQn);
+}
+
+/**
+ * @brief Configures the SysTick clock source.
+ * @param CLKSource specifies the SysTick clock source.
+ * This parameter can be one of the following values:
+ * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+ * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+ * @retval None
+ */
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
+ if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
+ {
+ SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
+ }
+ else
+ {
+ SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
+ }
+}
+
+/**
+ * @brief This function handles SYSTICK interrupt request.
+ * @retval None
+ */
+void HAL_SYSTICK_IRQHandler(void)
+{
+ HAL_SYSTICK_Callback();
+}
+
+/**
+ * @brief SYSTICK callback.
+ * @retval None
+ */
+__weak void HAL_SYSTICK_Callback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SYSTICK_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c
new file mode 100644
index 00000000..276dfa02
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c
@@ -0,0 +1,1323 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_dma.c
+ * @author MCD Application Team
+ * @brief DMA HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the Direct Memory Access (DMA) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State and errors functions
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Enable and configure the peripheral to be connected to the DMA Stream
+ (except for internal SRAM/FLASH memories: no initialization is
+ necessary) please refer to Reference manual for connection between peripherals
+ and DMA requests.
+
+ (#) For a given Stream, program the required configuration through the following parameters:
+ Transfer Direction, Source and Destination data formats,
+ Circular, Normal or peripheral flow control mode, Stream Priority level,
+ Source and Destination Increment mode, FIFO mode and its Threshold (if needed),
+ Burst mode for Source and/or Destination (if needed) using HAL_DMA_Init() function.
+
+ -@- Prior to HAL_DMA_Init() the clock must be enabled for DMA through the following macros:
+ __HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE().
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source
+ address and destination address and the Length of data to be transferred.
+ (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this
+ case a fixed Timeout can be configured by User depending from his application.
+ (+) Use HAL_DMA_Abort() function to abort the current transfer.
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority()
+ (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ()
+ (+) Select Callbacks functions using HAL_DMA_RegisterCallback()
+ (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of
+ Source address and destination address and the Length of data to be transferred. In this
+ case the DMA interrupt is configured
+ (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine
+ (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can
+ add his own function by customization of function pointer XferCpltCallback and
+ XferErrorCallback (i.e a member of DMA handle structure).
+ [..]
+ (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error
+ detection.
+
+ (#) Use HAL_DMA_Abort_IT() function to abort the current transfer
+
+ -@- In Memory-to-Memory transfer mode, Circular mode is not allowed.
+
+ -@- The FIFO is used mainly to reduce bus usage and to allow data packing/unpacking: it is
+ possible to set different Data Sizes for the Peripheral and the Memory (ie. you can set
+ Half-Word data size for the peripheral to access its data register and set Word data size
+ for the Memory to gain in access time. Each two half words will be packed and written in
+ a single access to a Word in the Memory).
+
+ -@- When FIFO is disabled, it is not allowed to configure different Data Sizes for Source
+ and Destination. In this case the Peripheral Data Size will be applied to both Source
+ and Destination.
+
+ *** DMA HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in DMA HAL driver.
+
+ (+) __HAL_DMA_ENABLE: Enable the specified DMA Stream.
+ (+) __HAL_DMA_DISABLE: Disable the specified DMA Stream.
+ (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Stream interrupt has occurred or not.
+
+ [..]
+ (@) You can refer to the DMA HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup DMA DMA
+ * @brief DMA HAL module driver
+ * @{
+ */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register */
+ __IO uint32_t Reserved0;
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register */
+} DMA_Base_Registers;
+
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup DMA_Private_Constants
+ * @{
+ */
+ #define HAL_TIMEOUT_DMA_ABORT ((uint32_t)5) /* 5 ms */
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup DMA_Private_Functions
+ * @{
+ */
+static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma);
+
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+/** @addtogroup DMA_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group1
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ This section provides functions allowing to initialize the DMA Stream source
+ and destination addresses, incrementation and data sizes, transfer direction,
+ circular/normal mode selection, memory-to-memory mode selection and Stream priority value.
+ [..]
+ The HAL_DMA_Init() function follows the DMA configuration procedures as described in
+ reference manual.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the DMA according to the specified
+ * parameters in the DMA_InitTypeDef and create the associated handle.
+ * @param hdma Pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma)
+{
+ uint32_t tmp = 0U;
+ uint32_t tickstart = HAL_GetTick();
+ DMA_Base_Registers *regs;
+
+ /* Check the DMA peripheral state */
+ if(hdma == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
+ assert_param(IS_DMA_CHANNEL(hdma->Init.Channel));
+ assert_param(IS_DMA_DIRECTION(hdma->Init.Direction));
+ assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc));
+ assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc));
+ assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment));
+ assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment));
+ assert_param(IS_DMA_MODE(hdma->Init.Mode));
+ assert_param(IS_DMA_PRIORITY(hdma->Init.Priority));
+ assert_param(IS_DMA_FIFO_MODE_STATE(hdma->Init.FIFOMode));
+ /* Check the memory burst, peripheral burst and FIFO threshold parameters only
+ when FIFO mode is enabled */
+ if(hdma->Init.FIFOMode != DMA_FIFOMODE_DISABLE)
+ {
+ assert_param(IS_DMA_FIFO_THRESHOLD(hdma->Init.FIFOThreshold));
+ assert_param(IS_DMA_MEMORY_BURST(hdma->Init.MemBurst));
+ assert_param(IS_DMA_PERIPHERAL_BURST(hdma->Init.PeriphBurst));
+ }
+
+ /* Allocate lock resource */
+ __HAL_UNLOCK(hdma);
+
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Disable the peripheral */
+ __HAL_DMA_DISABLE(hdma);
+
+ /* Check if the DMA Stream is effectively disabled */
+ while((hdma->Instance->CR & DMA_SxCR_EN) != RESET)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT)
+ {
+ /* Update error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_TIMEOUT;
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get the CR register value */
+ tmp = hdma->Instance->CR;
+
+ /* Clear CHSEL, MBURST, PBURST, PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR, CT and DBM bits */
+ tmp &= ((uint32_t)~(DMA_SxCR_CHSEL | DMA_SxCR_MBURST | DMA_SxCR_PBURST | \
+ DMA_SxCR_PL | DMA_SxCR_MSIZE | DMA_SxCR_PSIZE | \
+ DMA_SxCR_MINC | DMA_SxCR_PINC | DMA_SxCR_CIRC | \
+ DMA_SxCR_DIR | DMA_SxCR_CT | DMA_SxCR_DBM));
+
+ /* Prepare the DMA Stream configuration */
+ tmp |= hdma->Init.Channel | hdma->Init.Direction |
+ hdma->Init.PeriphInc | hdma->Init.MemInc |
+ hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment |
+ hdma->Init.Mode | hdma->Init.Priority;
+
+ /* the Memory burst and peripheral burst are not used when the FIFO is disabled */
+ if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE)
+ {
+ /* Get memory burst and peripheral burst */
+ tmp |= hdma->Init.MemBurst | hdma->Init.PeriphBurst;
+ }
+
+ /* Write to DMA Stream CR register */
+ hdma->Instance->CR = tmp;
+
+ /* Get the FCR register value */
+ tmp = hdma->Instance->FCR;
+
+ /* Clear Direct mode and FIFO threshold bits */
+ tmp &= (uint32_t)~(DMA_SxFCR_DMDIS | DMA_SxFCR_FTH);
+
+ /* Prepare the DMA Stream FIFO configuration */
+ tmp |= hdma->Init.FIFOMode;
+
+ /* The FIFO threshold is not used when the FIFO mode is disabled */
+ if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE)
+ {
+ /* Get the FIFO threshold */
+ tmp |= hdma->Init.FIFOThreshold;
+
+ /* Check compatibility between FIFO threshold level and size of the memory burst */
+ /* for INCR4, INCR8, INCR16 bursts */
+ if (hdma->Init.MemBurst != DMA_MBURST_SINGLE)
+ {
+ if (DMA_CheckFifoParam(hdma) != HAL_OK)
+ {
+ /* Update error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_PARAM;
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ /* Write to DMA Stream FCR */
+ hdma->Instance->FCR = tmp;
+
+ /* Initialize StreamBaseAddress and StreamIndex parameters to be used to calculate
+ DMA steam Base Address needed by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */
+ regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma);
+
+ /* Clear all interrupt flags */
+ regs->IFCR = 0x3FU << hdma->StreamIndex;
+
+ /* Initialize the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Initialize the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the DMA peripheral
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma)
+{
+ DMA_Base_Registers *regs;
+
+ /* Check the DMA peripheral state */
+ if(hdma == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the DMA peripheral state */
+ if(hdma->State == HAL_DMA_STATE_BUSY)
+ {
+ /* Return error status */
+ return HAL_BUSY;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
+
+ /* Disable the selected DMA Streamx */
+ __HAL_DMA_DISABLE(hdma);
+
+ /* Reset DMA Streamx control register */
+ hdma->Instance->CR = 0U;
+
+ /* Reset DMA Streamx number of data to transfer register */
+ hdma->Instance->NDTR = 0U;
+
+ /* Reset DMA Streamx peripheral address register */
+ hdma->Instance->PAR = 0U;
+
+ /* Reset DMA Streamx memory 0 address register */
+ hdma->Instance->M0AR = 0U;
+
+ /* Reset DMA Streamx memory 1 address register */
+ hdma->Instance->M1AR = 0U;
+
+ /* Reset DMA Streamx FIFO control register */
+ hdma->Instance->FCR = (uint32_t)0x00000021U;
+
+ /* Get DMA steam Base Address */
+ regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma);
+
+ /* Clear all interrupt flags at correct offset within the register */
+ regs->IFCR = 0x3FU << hdma->StreamIndex;
+
+ /* Clean all callbacks */
+ hdma->XferCpltCallback = NULL;
+ hdma->XferHalfCpltCallback = NULL;
+ hdma->XferM1CpltCallback = NULL;
+ hdma->XferM1HalfCpltCallback = NULL;
+ hdma->XferErrorCallback = NULL;
+ hdma->XferAbortCallback = NULL;
+
+ /* Reset the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Reset the DMA state */
+ hdma->State = HAL_DMA_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group2
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure the source, destination address and data length and Start DMA transfer
+ (+) Configure the source, destination address and data length and
+ Start DMA transfer with interrupt
+ (+) Abort DMA transfer
+ (+) Poll for transfer complete
+ (+) Handle DMA interrupt request
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the DMA Transfer.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param SrcAddress The source memory Buffer address
+ * @param DstAddress The destination memory Buffer address
+ * @param DataLength The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Initialize the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Configure the source, destination address and the data length */
+ DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+ /* Enable the Peripheral */
+ __HAL_DMA_ENABLE(hdma);
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Return error status */
+ status = HAL_BUSY;
+ }
+ return status;
+}
+
+/**
+ * @brief Start the DMA Transfer with interrupt enabled.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param SrcAddress The source memory Buffer address
+ * @param DstAddress The destination memory Buffer address
+ * @param DataLength The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* calculate DMA base and stream number */
+ DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Initialize the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Configure the source, destination address and the data length */
+ DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+ /* Clear all interrupt flags at correct offset within the register */
+ regs->IFCR = 0x3FU << hdma->StreamIndex;
+
+ /* Enable Common interrupts*/
+ hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME;
+ hdma->Instance->FCR |= DMA_IT_FE;
+
+ if(hdma->XferHalfCpltCallback != NULL)
+ {
+ hdma->Instance->CR |= DMA_IT_HT;
+ }
+
+ /* Enable the Peripheral */
+ __HAL_DMA_ENABLE(hdma);
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Return error status */
+ status = HAL_BUSY;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Aborts the DMA Transfer.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ *
+ * @note After disabling a DMA Stream, a check for wait until the DMA Stream is
+ * effectively disabled is added. If a Stream is disabled
+ * while a data transfer is ongoing, the current data will be transferred
+ * and the Stream will be effectively disabled only after the transfer of
+ * this single data is finished.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma)
+{
+ /* calculate DMA base and stream number */
+ DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
+
+ uint32_t tickstart = HAL_GetTick();
+
+ if(hdma->State != HAL_DMA_STATE_BUSY)
+ {
+ hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Disable all the transfer interrupts */
+ hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME);
+ hdma->Instance->FCR &= ~(DMA_IT_FE);
+
+ if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL))
+ {
+ hdma->Instance->CR &= ~(DMA_IT_HT);
+ }
+
+ /* Disable the stream */
+ __HAL_DMA_DISABLE(hdma);
+
+ /* Check if the DMA Stream is effectively disabled */
+ while((hdma->Instance->CR & DMA_SxCR_EN) != RESET)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT)
+ {
+ /* Update error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_TIMEOUT;
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear all interrupt flags at correct offset within the register */
+ regs->IFCR = 0x3FU << hdma->StreamIndex;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state*/
+ hdma->State = HAL_DMA_STATE_READY;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Aborts the DMA Transfer in Interrupt mode.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma)
+{
+ if(hdma->State != HAL_DMA_STATE_BUSY)
+ {
+ hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Set Abort State */
+ hdma->State = HAL_DMA_STATE_ABORT;
+
+ /* Disable the stream */
+ __HAL_DMA_DISABLE(hdma);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Polling for transfer complete.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param CompleteLevel Specifies the DMA level complete.
+ * @note The polling mode is kept in this version for legacy. it is recommanded to use the IT model instead.
+ * This model could be used for debug purpose.
+ * @note The HAL_DMA_PollForTransfer API cannot be used in circular and double buffering mode (automatic circular mode).
+ * @param Timeout Timeout duration.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t mask_cpltlevel;
+ uint32_t tickstart = HAL_GetTick();
+ uint32_t tmpisr;
+
+ /* calculate DMA base and stream number */
+ DMA_Base_Registers *regs;
+
+ if(HAL_DMA_STATE_BUSY != hdma->State)
+ {
+ /* No transfer ongoing */
+ hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
+ __HAL_UNLOCK(hdma);
+ return HAL_ERROR;
+ }
+
+ /* Polling mode not supported in circular mode and double buffering mode */
+ if ((hdma->Instance->CR & DMA_SxCR_CIRC) != RESET)
+ {
+ hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
+ return HAL_ERROR;
+ }
+
+ /* Get the level transfer complete flag */
+ if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
+ {
+ /* Transfer Complete flag */
+ mask_cpltlevel = DMA_FLAG_TCIF0_4 << hdma->StreamIndex;
+ }
+ else
+ {
+ /* Half Transfer Complete flag */
+ mask_cpltlevel = DMA_FLAG_HTIF0_4 << hdma->StreamIndex;
+ }
+
+ regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
+ tmpisr = regs->ISR;
+
+ while(((tmpisr & mask_cpltlevel) == RESET) && ((hdma->ErrorCode & HAL_DMA_ERROR_TE) == RESET))
+ {
+ /* Check for the Timeout (Not applicable in circular mode)*/
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Update error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get the ISR register value */
+ tmpisr = regs->ISR;
+
+ if((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ /* Update error code */
+ hdma->ErrorCode |= HAL_DMA_ERROR_TE;
+
+ /* Clear the transfer error flag */
+ regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex;
+ }
+
+ if((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ /* Update error code */
+ hdma->ErrorCode |= HAL_DMA_ERROR_FE;
+
+ /* Clear the FIFO error flag */
+ regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex;
+ }
+
+ if((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ /* Update error code */
+ hdma->ErrorCode |= HAL_DMA_ERROR_DME;
+
+ /* Clear the Direct Mode error flag */
+ regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex;
+ }
+ }
+
+ if(hdma->ErrorCode != HAL_DMA_ERROR_NONE)
+ {
+ if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET)
+ {
+ HAL_DMA_Abort(hdma);
+
+ /* Clear the half transfer and transfer complete flags */
+ regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state */
+ hdma->State= HAL_DMA_STATE_READY;
+
+ return HAL_ERROR;
+ }
+ }
+
+ /* Get the level transfer complete flag */
+ if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
+ {
+ /* Clear the half transfer and transfer complete flags */
+ regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ hdma->State = HAL_DMA_STATE_READY;
+ }
+ else
+ {
+ /* Clear the half transfer flag */
+ regs->IFCR = (DMA_FLAG_HTIF0_4) << hdma->StreamIndex;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Handles DMA interrupt request.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval None
+ */
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
+{
+ uint32_t tmpisr;
+ __IO uint32_t count = 0;
+ uint32_t timeout = SystemCoreClock / 9600;
+
+ /* calculate DMA base and stream number */
+ DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
+
+ tmpisr = regs->ISR;
+
+ /* Transfer Error Interrupt management ***************************************/
+ if ((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TE) != RESET)
+ {
+ /* Disable the transfer error interrupt */
+ hdma->Instance->CR &= ~(DMA_IT_TE);
+
+ /* Clear the transfer error flag */
+ regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex;
+
+ /* Update error code */
+ hdma->ErrorCode |= HAL_DMA_ERROR_TE;
+ }
+ }
+ /* FIFO Error Interrupt management ******************************************/
+ if ((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_FE) != RESET)
+ {
+ /* Clear the FIFO error flag */
+ regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex;
+
+ /* Update error code */
+ hdma->ErrorCode |= HAL_DMA_ERROR_FE;
+ }
+ }
+ /* Direct Mode Error Interrupt management ***********************************/
+ if ((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_DME) != RESET)
+ {
+ /* Clear the direct mode error flag */
+ regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex;
+
+ /* Update error code */
+ hdma->ErrorCode |= HAL_DMA_ERROR_DME;
+ }
+ }
+ /* Half Transfer Complete Interrupt management ******************************/
+ if ((tmpisr & (DMA_FLAG_HTIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != RESET)
+ {
+ /* Clear the half transfer complete flag */
+ regs->IFCR = DMA_FLAG_HTIF0_4 << hdma->StreamIndex;
+
+ /* Multi_Buffering mode enabled */
+ if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET)
+ {
+ /* Current memory buffer used is Memory 0 */
+ if((hdma->Instance->CR & DMA_SxCR_CT) == RESET)
+ {
+ if(hdma->XferHalfCpltCallback != NULL)
+ {
+ /* Half transfer callback */
+ hdma->XferHalfCpltCallback(hdma);
+ }
+ }
+ /* Current memory buffer used is Memory 1 */
+ else
+ {
+ if(hdma->XferM1HalfCpltCallback != NULL)
+ {
+ /* Half transfer callback */
+ hdma->XferM1HalfCpltCallback(hdma);
+ }
+ }
+ }
+ else
+ {
+ /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET)
+ {
+ /* Disable the half transfer interrupt */
+ hdma->Instance->CR &= ~(DMA_IT_HT);
+ }
+
+ if(hdma->XferHalfCpltCallback != NULL)
+ {
+ /* Half transfer callback */
+ hdma->XferHalfCpltCallback(hdma);
+ }
+ }
+ }
+ }
+ /* Transfer Complete Interrupt management ***********************************/
+ if ((tmpisr & (DMA_FLAG_TCIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != RESET)
+ {
+ /* Clear the transfer complete flag */
+ regs->IFCR = DMA_FLAG_TCIF0_4 << hdma->StreamIndex;
+
+ if(HAL_DMA_STATE_ABORT == hdma->State)
+ {
+ /* Disable all the transfer interrupts */
+ hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME);
+ hdma->Instance->FCR &= ~(DMA_IT_FE);
+
+ if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL))
+ {
+ hdma->Instance->CR &= ~(DMA_IT_HT);
+ }
+
+ /* Clear all interrupt flags at correct offset within the register */
+ regs->IFCR = 0x3FU << hdma->StreamIndex;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ if(hdma->XferAbortCallback != NULL)
+ {
+ hdma->XferAbortCallback(hdma);
+ }
+ return;
+ }
+
+ if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET)
+ {
+ /* Current memory buffer used is Memory 0 */
+ if((hdma->Instance->CR & DMA_SxCR_CT) == RESET)
+ {
+ if(hdma->XferM1CpltCallback != NULL)
+ {
+ /* Transfer complete Callback for memory1 */
+ hdma->XferM1CpltCallback(hdma);
+ }
+ }
+ /* Current memory buffer used is Memory 1 */
+ else
+ {
+ if(hdma->XferCpltCallback != NULL)
+ {
+ /* Transfer complete Callback for memory0 */
+ hdma->XferCpltCallback(hdma);
+ }
+ }
+ }
+ /* Disable the transfer complete interrupt if the DMA mode is not CIRCULAR */
+ else
+ {
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET)
+ {
+ /* Disable the transfer complete interrupt */
+ hdma->Instance->CR &= ~(DMA_IT_TC);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+ }
+
+ if(hdma->XferCpltCallback != NULL)
+ {
+ /* Transfer complete callback */
+ hdma->XferCpltCallback(hdma);
+ }
+ }
+ }
+ }
+
+ /* manage error case */
+ if(hdma->ErrorCode != HAL_DMA_ERROR_NONE)
+ {
+ if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET)
+ {
+ hdma->State = HAL_DMA_STATE_ABORT;
+
+ /* Disable the stream */
+ __HAL_DMA_DISABLE(hdma);
+
+ do
+ {
+ if (++count > timeout)
+ {
+ break;
+ }
+ }
+ while((hdma->Instance->CR & DMA_SxCR_EN) != RESET);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+ }
+
+ if(hdma->XferErrorCallback != NULL)
+ {
+ /* Transfer error callback */
+ hdma->XferErrorCallback(hdma);
+ }
+ }
+}
+
+/**
+ * @brief Register callbacks
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param CallbackID User Callback identifer
+ * a DMA_HandleTypeDef structure as parameter.
+ * @param pCallback pointer to private callbacsk function which has pointer to
+ * a DMA_HandleTypeDef structure as parameter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma))
+{
+
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_DMA_XFER_CPLT_CB_ID:
+ hdma->XferCpltCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_HALFCPLT_CB_ID:
+ hdma->XferHalfCpltCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_M1CPLT_CB_ID:
+ hdma->XferM1CpltCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_M1HALFCPLT_CB_ID:
+ hdma->XferM1HalfCpltCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_ERROR_CB_ID:
+ hdma->XferErrorCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_ABORT_CB_ID:
+ hdma->XferAbortCallback = pCallback;
+ break;
+
+ default:
+ break;
+ }
+ }
+ else
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdma);
+
+ return status;
+}
+
+/**
+ * @brief UnRegister callbacks
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param CallbackID User Callback identifer
+ * a HAL_DMA_CallbackIDTypeDef ENUM as parameter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_DMA_XFER_CPLT_CB_ID:
+ hdma->XferCpltCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_HALFCPLT_CB_ID:
+ hdma->XferHalfCpltCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_M1CPLT_CB_ID:
+ hdma->XferM1CpltCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_M1HALFCPLT_CB_ID:
+ hdma->XferM1HalfCpltCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_ERROR_CB_ID:
+ hdma->XferErrorCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_ABORT_CB_ID:
+ hdma->XferAbortCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_ALL_CB_ID:
+ hdma->XferCpltCallback = NULL;
+ hdma->XferHalfCpltCallback = NULL;
+ hdma->XferM1CpltCallback = NULL;
+ hdma->XferM1HalfCpltCallback = NULL;
+ hdma->XferErrorCallback = NULL;
+ hdma->XferAbortCallback = NULL;
+ break;
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdma);
+
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group3
+ *
+@verbatim
+ ===============================================================================
+ ##### State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Check the DMA state
+ (+) Get error code
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the DMA state.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval HAL state
+ */
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma)
+{
+ return hdma->State;
+}
+
+/**
+ * @brief Return the DMA error code
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval DMA Error Code
+ */
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma)
+{
+ return hdma->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Sets the DMA Transfer parameter.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param SrcAddress The source memory Buffer address
+ * @param DstAddress The destination memory Buffer address
+ * @param DataLength The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ /* Clear DBM bit */
+ hdma->Instance->CR &= (uint32_t)(~DMA_SxCR_DBM);
+
+ /* Configure DMA Stream data length */
+ hdma->Instance->NDTR = DataLength;
+
+ /* Memory to Peripheral */
+ if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
+ {
+ /* Configure DMA Stream destination address */
+ hdma->Instance->PAR = DstAddress;
+
+ /* Configure DMA Stream source address */
+ hdma->Instance->M0AR = SrcAddress;
+ }
+ /* Peripheral to Memory */
+ else
+ {
+ /* Configure DMA Stream source address */
+ hdma->Instance->PAR = SrcAddress;
+
+ /* Configure DMA Stream destination address */
+ hdma->Instance->M0AR = DstAddress;
+ }
+}
+
+/**
+ * @brief Returns the DMA Stream base address depending on stream number
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval Stream base address
+ */
+static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma)
+{
+ uint32_t stream_number = (((uint32_t)hdma->Instance & 0xFFU) - 16U) / 24U;
+
+ /* lookup table for necessary bitshift of flags within status registers */
+ static const uint8_t flagBitshiftOffset[8U] = {0U, 6U, 16U, 22U, 0U, 6U, 16U, 22U};
+ hdma->StreamIndex = flagBitshiftOffset[stream_number];
+
+ if (stream_number > 3U)
+ {
+ /* return pointer to HISR and HIFCR */
+ hdma->StreamBaseAddress = (((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU)) + 4U);
+ }
+ else
+ {
+ /* return pointer to LISR and LIFCR */
+ hdma->StreamBaseAddress = ((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU));
+ }
+
+ return hdma->StreamBaseAddress;
+}
+
+/**
+ * @brief Check compatibility between FIFO threshold level and size of the memory burst
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tmp = hdma->Init.FIFOThreshold;
+
+ /* Memory Data size equal to Byte */
+ if(hdma->Init.MemDataAlignment == DMA_MDATAALIGN_BYTE)
+ {
+ switch (tmp)
+ {
+ case DMA_FIFO_THRESHOLD_1QUARTERFULL:
+ case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
+ if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
+ {
+ status = HAL_ERROR;
+ }
+ break;
+ case DMA_FIFO_THRESHOLD_HALFFULL:
+ if (hdma->Init.MemBurst == DMA_MBURST_INC16)
+ {
+ status = HAL_ERROR;
+ }
+ break;
+ case DMA_FIFO_THRESHOLD_FULL:
+ break;
+ default:
+ break;
+ }
+ }
+
+ /* Memory Data size equal to Half-Word */
+ else if (hdma->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)
+ {
+ switch (tmp)
+ {
+ case DMA_FIFO_THRESHOLD_1QUARTERFULL:
+ case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
+ status = HAL_ERROR;
+ break;
+ case DMA_FIFO_THRESHOLD_HALFFULL:
+ if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
+ {
+ status = HAL_ERROR;
+ }
+ break;
+ case DMA_FIFO_THRESHOLD_FULL:
+ if (hdma->Init.MemBurst == DMA_MBURST_INC16)
+ {
+ status = HAL_ERROR;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+ /* Memory Data size equal to Word */
+ else
+ {
+ switch (tmp)
+ {
+ case DMA_FIFO_THRESHOLD_1QUARTERFULL:
+ case DMA_FIFO_THRESHOLD_HALFFULL:
+ case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
+ status = HAL_ERROR;
+ break;
+ case DMA_FIFO_THRESHOLD_FULL:
+ if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
+ {
+ status = HAL_ERROR;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_DMA_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c
new file mode 100644
index 00000000..d16a1ccf
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c
@@ -0,0 +1,326 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_dma_ex.c
+ * @author MCD Application Team
+ * @brief DMA Extension HAL module driver
+ * This file provides firmware functions to manage the following
+ * functionalities of the DMA Extension peripheral:
+ * + Extended features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The DMA Extension HAL driver can be used as follows:
+ (+) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function
+ for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode.
+
+ -@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed.
+ -@- When Multi (Double) Buffer mode is enabled, the transfer is circular by default.
+ -@- In Multi (Double) buffer mode, it is possible to update the base address for
+ the AHB memory port on the fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup DMAEx DMAEx
+ * @brief DMA Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private Constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup DMAEx_Private_Functions
+ * @{
+ */
+
+static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @addtogroup DMAEx_Exported_Functions
+ * @{
+ */
+
+
+/** @addtogroup DMAEx_Exported_Functions_Group1
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure the source, destination address and data length and
+ Start MultiBuffer DMA transfer
+ (+) Configure the source, destination address and data length and
+ Start MultiBuffer DMA transfer with interrupt
+ (+) Change on the fly the memory0 or memory1 address.
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Starts the multi_buffer DMA Transfer.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param SrcAddress The source memory Buffer address
+ * @param DstAddress The destination memory Buffer address
+ * @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer
+ * @param DataLength The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+ /* Memory-to-memory transfer not supported in double buffering mode */
+ if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY)
+ {
+ hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Process Locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Enable the double buffer mode */
+ hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
+
+ /* Configure DMA Stream destination address */
+ hdma->Instance->M1AR = SecondMemAddress;
+
+ /* Configure the source, destination address and the data length */
+ DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+ /* Enable the peripheral */
+ __HAL_DMA_ENABLE(hdma);
+ }
+ else
+ {
+ /* Return error status */
+ status = HAL_BUSY;
+ }
+ }
+ return status;
+}
+
+/**
+ * @brief Starts the multi_buffer DMA Transfer with interrupt enabled.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param SrcAddress The source memory Buffer address
+ * @param DstAddress The destination memory Buffer address
+ * @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer
+ * @param DataLength The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+ /* Memory-to-memory transfer not supported in double buffering mode */
+ if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY)
+ {
+ hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
+ return HAL_ERROR;
+ }
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Initialize the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Enable the Double buffer mode */
+ hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
+
+ /* Configure DMA Stream destination address */
+ hdma->Instance->M1AR = SecondMemAddress;
+
+ /* Configure the source, destination address and the data length */
+ DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+ /* Clear all flags */
+ __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
+ __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
+ __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
+ __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma));
+ __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma));
+
+ /* Enable Common interrupts*/
+ hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME;
+ hdma->Instance->FCR |= DMA_IT_FE;
+
+ if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL))
+ {
+ hdma->Instance->CR |= DMA_IT_HT;
+ }
+
+ /* Enable the peripheral */
+ __HAL_DMA_ENABLE(hdma);
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Return error status */
+ status = HAL_BUSY;
+ }
+ return status;
+}
+
+/**
+ * @brief Change the memory0 or memory1 address on the fly.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param Address The new address
+ * @param memory the memory to be changed, This parameter can be one of
+ * the following values:
+ * MEMORY0 /
+ * MEMORY1
+ * @note The MEMORY0 address can be changed only when the current transfer use
+ * MEMORY1 and the MEMORY1 address can be changed only when the current
+ * transfer use MEMORY0.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory)
+{
+ if(memory == MEMORY0)
+ {
+ /* change the memory0 address */
+ hdma->Instance->M0AR = Address;
+ }
+ else
+ {
+ /* change the memory1 address */
+ hdma->Instance->M1AR = Address;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMAEx_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Set the DMA Transfer parameter.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param SrcAddress The source memory Buffer address
+ * @param DstAddress The destination memory Buffer address
+ * @param DataLength The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ /* Configure DMA Stream data length */
+ hdma->Instance->NDTR = DataLength;
+
+ /* Peripheral to Memory */
+ if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
+ {
+ /* Configure DMA Stream destination address */
+ hdma->Instance->PAR = DstAddress;
+
+ /* Configure DMA Stream source address */
+ hdma->Instance->M0AR = SrcAddress;
+ }
+ /* Memory to Peripheral */
+ else
+ {
+ /* Configure DMA Stream source address */
+ hdma->Instance->PAR = SrcAddress;
+
+ /* Configure DMA Stream destination address */
+ hdma->Instance->M0AR = DstAddress;
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_DMA_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_eth.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_eth.c
new file mode 100644
index 00000000..94f044ff
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_eth.c
@@ -0,0 +1,2043 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_eth.c
+ * @author MCD Application Team
+ * @brief ETH HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Ethernet (ETH) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#)Declare a ETH_HandleTypeDef handle structure, for example:
+ ETH_HandleTypeDef heth;
+
+ (#)Fill parameters of Init structure in heth handle
+
+ (#)Call HAL_ETH_Init() API to initialize the Ethernet peripheral (MAC, DMA, ...)
+
+ (#)Initialize the ETH low level resources through the HAL_ETH_MspInit() API:
+ (##) Enable the Ethernet interface clock using
+ (+++) __HAL_RCC_ETHMAC_CLK_ENABLE();
+ (+++) __HAL_RCC_ETHMACTX_CLK_ENABLE();
+ (+++) __HAL_RCC_ETHMACRX_CLK_ENABLE();
+
+ (##) Initialize the related GPIO clocks
+ (##) Configure Ethernet pin-out
+ (##) Configure Ethernet NVIC interrupt (IT mode)
+
+ (#)Initialize Ethernet DMA Descriptors in chain mode and point to allocated buffers:
+ (##) HAL_ETH_DMATxDescListInit(); for Transmission process
+ (##) HAL_ETH_DMARxDescListInit(); for Reception process
+
+ (#)Enable MAC and DMA transmission and reception:
+ (##) HAL_ETH_Start();
+
+ (#)Prepare ETH DMA TX Descriptors and give the hand to ETH DMA to transfer
+ the frame to MAC TX FIFO:
+ (##) HAL_ETH_TransmitFrame();
+
+ (#)Poll for a received frame in ETH RX DMA Descriptors and get received
+ frame parameters
+ (##) HAL_ETH_GetReceivedFrame(); (should be called into an infinite loop)
+
+ (#) Get a received frame when an ETH RX interrupt occurs:
+ (##) HAL_ETH_GetReceivedFrame_IT(); (called in IT mode only)
+
+ (#) Communicate with external PHY device:
+ (##) Read a specific register from the PHY
+ HAL_ETH_ReadPHYRegister();
+ (##) Write data to a specific RHY register:
+ HAL_ETH_WritePHYRegister();
+
+ (#) Configure the Ethernet MAC after ETH peripheral initialization
+ HAL_ETH_ConfigMAC(); all MAC parameters should be filled.
+
+ (#) Configure the Ethernet DMA after ETH peripheral initialization
+ HAL_ETH_ConfigDMA(); all DMA parameters should be filled.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup ETH ETH
+ * @brief ETH HAL module driver
+ * @{
+ */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+#if defined (ETH)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup ETH_Private_Constants ETH Private Constants
+ * @{
+ */
+#define ETH_TIMEOUT_SWRESET ((uint32_t)500)
+#define ETH_TIMEOUT_LINKED_STATE ((uint32_t)5000)
+#define ETH_TIMEOUT_AUTONEGO_COMPLETED ((uint32_t)5000)
+
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup ETH_Private_Functions ETH Private Functions
+ * @{
+ */
+static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth, uint32_t err);
+static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr);
+static void ETH_MACReceptionEnable(ETH_HandleTypeDef *heth);
+static void ETH_MACReceptionDisable(ETH_HandleTypeDef *heth);
+static void ETH_MACTransmissionEnable(ETH_HandleTypeDef *heth);
+static void ETH_MACTransmissionDisable(ETH_HandleTypeDef *heth);
+static void ETH_DMATransmissionEnable(ETH_HandleTypeDef *heth);
+static void ETH_DMATransmissionDisable(ETH_HandleTypeDef *heth);
+static void ETH_DMAReceptionEnable(ETH_HandleTypeDef *heth);
+static void ETH_DMAReceptionDisable(ETH_HandleTypeDef *heth);
+static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth);
+
+/**
+ * @}
+ */
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup ETH_Exported_Functions ETH Exported Functions
+ * @{
+ */
+
+/** @defgroup ETH_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the Ethernet peripheral
+ (+) De-initialize the Ethernet peripheral
+
+ @endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the Ethernet MAC and DMA according to default
+ * parameters.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth)
+{
+ uint32_t tempreg = 0, phyreg = 0;
+ uint32_t hclk = 60000000;
+ uint32_t tickstart = 0;
+ uint32_t err = ETH_SUCCESS;
+
+ /* Check the ETH peripheral state */
+ if(heth == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check parameters */
+ assert_param(IS_ETH_AUTONEGOTIATION(heth->Init.AutoNegotiation));
+ assert_param(IS_ETH_RX_MODE(heth->Init.RxMode));
+ assert_param(IS_ETH_CHECKSUM_MODE(heth->Init.ChecksumMode));
+ assert_param(IS_ETH_MEDIA_INTERFACE(heth->Init.MediaInterface));
+
+ if(heth->State == HAL_ETH_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ heth->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, NVIC. */
+ HAL_ETH_MspInit(heth);
+ }
+
+ /* Enable SYSCFG Clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Select MII or RMII Mode*/
+ SYSCFG->PMC &= ~(SYSCFG_PMC_MII_RMII_SEL);
+ SYSCFG->PMC |= (uint32_t)heth->Init.MediaInterface;
+
+ /* Ethernet Software reset */
+ /* Set the SWR bit: resets all MAC subsystem internal registers and logic */
+ /* After reset all the registers holds their respective reset values */
+ (heth->Instance)->DMABMR |= ETH_DMABMR_SR;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait for software reset */
+ while (((heth->Instance)->DMABMR & ETH_DMABMR_SR) != (uint32_t)RESET)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > ETH_TIMEOUT_SWRESET)
+ {
+ heth->State= HAL_ETH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Note: The SWR is not performed if the ETH_RX_CLK or the ETH_TX_CLK are
+ not available, please check your external PHY or the IO configuration */
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /*-------------------------------- MAC Initialization ----------------------*/
+ /* Get the ETHERNET MACMIIAR value */
+ tempreg = (heth->Instance)->MACMIIAR;
+ /* Clear CSR Clock Range CR[2:0] bits */
+ tempreg &= ETH_MACMIIAR_CR_MASK;
+
+ /* Get hclk frequency value */
+ hclk = HAL_RCC_GetHCLKFreq();
+
+ /* Set CR bits depending on hclk value */
+ if((hclk >= 20000000)&&(hclk < 35000000))
+ {
+ /* CSR Clock Range between 20-35 MHz */
+ tempreg |= (uint32_t)ETH_MACMIIAR_CR_Div16;
+ }
+ else if((hclk >= 35000000)&&(hclk < 60000000))
+ {
+ /* CSR Clock Range between 35-60 MHz */
+ tempreg |= (uint32_t)ETH_MACMIIAR_CR_Div26;
+ }
+ else if((hclk >= 60000000)&&(hclk < 100000000))
+ {
+ /* CSR Clock Range between 60-100 MHz */
+ tempreg |= (uint32_t)ETH_MACMIIAR_CR_Div42;
+ }
+ else if((hclk >= 100000000)&&(hclk < 150000000))
+ {
+ /* CSR Clock Range between 100-150 MHz */
+ tempreg |= (uint32_t)ETH_MACMIIAR_CR_Div62;
+ }
+ else /* ((hclk >= 150000000)&&(hclk <= 216000000)) */
+ {
+ /* CSR Clock Range between 150-216 MHz */
+ tempreg |= (uint32_t)ETH_MACMIIAR_CR_Div102;
+ }
+
+ /* Write to ETHERNET MAC MIIAR: Configure the ETHERNET CSR Clock Range */
+ (heth->Instance)->MACMIIAR = (uint32_t)tempreg;
+
+ /*-------------------- PHY initialization and configuration ----------------*/
+ /* Put the PHY in reset mode */
+ if((HAL_ETH_WritePHYRegister(heth, PHY_BCR, PHY_RESET)) != HAL_OK)
+ {
+ /* In case of write timeout */
+ err = ETH_ERROR;
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ /* Set the ETH peripheral state to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Return HAL_ERROR */
+ return HAL_ERROR;
+ }
+
+ /* Delay to assure PHY reset */
+ HAL_Delay(PHY_RESET_DELAY);
+
+ if((heth->Init).AutoNegotiation != ETH_AUTONEGOTIATION_DISABLE)
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* We wait for linked status */
+ do
+ {
+ HAL_ETH_ReadPHYRegister(heth, PHY_BSR, &phyreg);
+
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > ETH_TIMEOUT_LINKED_STATE)
+ {
+ /* In case of write timeout */
+ err = ETH_ERROR;
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ return HAL_TIMEOUT;
+ }
+ } while (((phyreg & PHY_LINKED_STATUS) != PHY_LINKED_STATUS));
+
+
+ /* Enable Auto-Negotiation */
+ if((HAL_ETH_WritePHYRegister(heth, PHY_BCR, PHY_AUTONEGOTIATION)) != HAL_OK)
+ {
+ /* In case of write timeout */
+ err = ETH_ERROR;
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ /* Set the ETH peripheral state to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Return HAL_ERROR */
+ return HAL_ERROR;
+ }
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until the auto-negotiation will be completed */
+ do
+ {
+ HAL_ETH_ReadPHYRegister(heth, PHY_BSR, &phyreg);
+
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > ETH_TIMEOUT_AUTONEGO_COMPLETED)
+ {
+ /* In case of write timeout */
+ err = ETH_ERROR;
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ return HAL_TIMEOUT;
+ }
+
+ } while (((phyreg & PHY_AUTONEGO_COMPLETE) != PHY_AUTONEGO_COMPLETE));
+
+ /* Read the result of the auto-negotiation */
+ if((HAL_ETH_ReadPHYRegister(heth, PHY_SR, &phyreg)) != HAL_OK)
+ {
+ /* In case of write timeout */
+ err = ETH_ERROR;
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ /* Set the ETH peripheral state to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Return HAL_ERROR */
+ return HAL_ERROR;
+ }
+
+ /* Configure the MAC with the Duplex Mode fixed by the auto-negotiation process */
+ if((phyreg & PHY_DUPLEX_STATUS) != (uint32_t)RESET)
+ {
+ /* Set Ethernet duplex mode to Full-duplex following the auto-negotiation */
+ (heth->Init).DuplexMode = ETH_MODE_FULLDUPLEX;
+ }
+ else
+ {
+ /* Set Ethernet duplex mode to Half-duplex following the auto-negotiation */
+ (heth->Init).DuplexMode = ETH_MODE_HALFDUPLEX;
+ }
+ /* Configure the MAC with the speed fixed by the auto-negotiation process */
+ if((phyreg & PHY_SPEED_STATUS) == PHY_SPEED_STATUS)
+ {
+ /* Set Ethernet speed to 10M following the auto-negotiation */
+ (heth->Init).Speed = ETH_SPEED_10M;
+ }
+ else
+ {
+ /* Set Ethernet speed to 100M following the auto-negotiation */
+ (heth->Init).Speed = ETH_SPEED_100M;
+ }
+ }
+ else /* AutoNegotiation Disable */
+ {
+ /* Check parameters */
+ assert_param(IS_ETH_SPEED(heth->Init.Speed));
+ assert_param(IS_ETH_DUPLEX_MODE(heth->Init.DuplexMode));
+
+ /* Set MAC Speed and Duplex Mode */
+ if(HAL_ETH_WritePHYRegister(heth, PHY_BCR, ((uint16_t)((heth->Init).DuplexMode >> 3) |
+ (uint16_t)((heth->Init).Speed >> 1))) != HAL_OK)
+ {
+ /* In case of write timeout */
+ err = ETH_ERROR;
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ /* Set the ETH peripheral state to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Return HAL_ERROR */
+ return HAL_ERROR;
+ }
+
+ /* Delay to assure PHY configuration */
+ HAL_Delay(PHY_CONFIG_DELAY);
+ }
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ /* Set ETH HAL State to Ready */
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief De-Initializes the ETH peripheral.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth)
+{
+ /* Set the ETH peripheral state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* De-Init the low level hardware : GPIO, CLOCK, NVIC. */
+ HAL_ETH_MspDeInit(heth);
+
+ /* Set ETH HAL state to Disabled */
+ heth->State= HAL_ETH_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the DMA Tx descriptors in chain mode.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param DMATxDescTab Pointer to the first Tx desc list
+ * @param TxBuff Pointer to the first TxBuffer list
+ * @param TxBuffCount Number of the used Tx desc in the list
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t *TxBuff, uint32_t TxBuffCount)
+{
+ uint32_t i = 0;
+ ETH_DMADescTypeDef *dmatxdesc;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* Set the DMATxDescToSet pointer with the first one of the DMATxDescTab list */
+ heth->TxDesc = DMATxDescTab;
+
+ /* Fill each DMATxDesc descriptor with the right values */
+ for(i=0; i < TxBuffCount; i++)
+ {
+ /* Get the pointer on the ith member of the Tx Desc list */
+ dmatxdesc = DMATxDescTab + i;
+
+ /* Set Second Address Chained bit */
+ dmatxdesc->Status = ETH_DMATXDESC_TCH;
+
+ /* Set Buffer1 address pointer */
+ dmatxdesc->Buffer1Addr = (uint32_t)(&TxBuff[i*ETH_TX_BUF_SIZE]);
+
+ if ((heth->Init).ChecksumMode == ETH_CHECKSUM_BY_HARDWARE)
+ {
+ /* Set the DMA Tx descriptors checksum insertion */
+ dmatxdesc->Status |= ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL;
+ }
+
+ /* Initialize the next descriptor with the Next Descriptor Polling Enable */
+ if(i < (TxBuffCount-1))
+ {
+ /* Set next descriptor address register with next descriptor base address */
+ dmatxdesc->Buffer2NextDescAddr = (uint32_t)(DMATxDescTab+i+1);
+ }
+ else
+ {
+ /* For last descriptor, set next descriptor address register equal to the first descriptor base address */
+ dmatxdesc->Buffer2NextDescAddr = (uint32_t) DMATxDescTab;
+ }
+ }
+
+ /* Set Transmit Descriptor List Address Register */
+ (heth->Instance)->DMATDLAR = (uint32_t) DMATxDescTab;
+
+ /* Set ETH HAL State to Ready */
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the DMA Rx descriptors in chain mode.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param DMARxDescTab Pointer to the first Rx desc list
+ * @param RxBuff Pointer to the first RxBuffer list
+ * @param RxBuffCount Number of the used Rx desc in the list
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount)
+{
+ uint32_t i = 0;
+ ETH_DMADescTypeDef *DMARxDesc;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* Set the Ethernet RxDesc pointer with the first one of the DMARxDescTab list */
+ heth->RxDesc = DMARxDescTab;
+
+ /* Fill each DMARxDesc descriptor with the right values */
+ for(i=0; i < RxBuffCount; i++)
+ {
+ /* Get the pointer on the ith member of the Rx Desc list */
+ DMARxDesc = DMARxDescTab+i;
+
+ /* Set Own bit of the Rx descriptor Status */
+ DMARxDesc->Status = ETH_DMARXDESC_OWN;
+
+ /* Set Buffer1 size and Second Address Chained bit */
+ DMARxDesc->ControlBufferSize = ETH_DMARXDESC_RCH | ETH_RX_BUF_SIZE;
+
+ /* Set Buffer1 address pointer */
+ DMARxDesc->Buffer1Addr = (uint32_t)(&RxBuff[i*ETH_RX_BUF_SIZE]);
+
+ if((heth->Init).RxMode == ETH_RXINTERRUPT_MODE)
+ {
+ /* Enable Ethernet DMA Rx Descriptor interrupt */
+ DMARxDesc->ControlBufferSize &= ~ETH_DMARXDESC_DIC;
+ }
+
+ /* Initialize the next descriptor with the Next Descriptor Polling Enable */
+ if(i < (RxBuffCount-1))
+ {
+ /* Set next descriptor address register with next descriptor base address */
+ DMARxDesc->Buffer2NextDescAddr = (uint32_t)(DMARxDescTab+i+1);
+ }
+ else
+ {
+ /* For last descriptor, set next descriptor address register equal to the first descriptor base address */
+ DMARxDesc->Buffer2NextDescAddr = (uint32_t)(DMARxDescTab);
+ }
+ }
+
+ /* Set Receive Descriptor List Address Register */
+ (heth->Instance)->DMARDLAR = (uint32_t) DMARxDescTab;
+
+ /* Set ETH HAL State to Ready */
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the ETH MSP.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+__weak void HAL_ETH_MspInit(ETH_HandleTypeDef *heth)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(heth);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ETH_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes ETH MSP.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+__weak void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(heth);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ETH_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Exported_Functions_Group2 IO operation functions
+ * @brief Data transfers functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Transmit a frame
+ HAL_ETH_TransmitFrame();
+ (+) Receive a frame
+ HAL_ETH_GetReceivedFrame();
+ HAL_ETH_GetReceivedFrame_IT();
+ (+) Read from an External PHY register
+ HAL_ETH_ReadPHYRegister();
+ (+) Write to an External PHY register
+ HAL_ETH_WritePHYRegister();
+
+ @endverbatim
+
+ * @{
+ */
+
+/**
+ * @brief Sends an Ethernet frame.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param FrameLength Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_TransmitFrame(ETH_HandleTypeDef *heth, uint32_t FrameLength)
+{
+ uint32_t bufcount = 0, size = 0, i = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ if (FrameLength == 0)
+ {
+ /* Set ETH HAL state to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ return HAL_ERROR;
+ }
+
+ /* Check if the descriptor is owned by the ETHERNET DMA (when set) or CPU (when reset) */
+ if(((heth->TxDesc)->Status & ETH_DMATXDESC_OWN) != (uint32_t)RESET)
+ {
+ /* OWN bit set */
+ heth->State = HAL_ETH_STATE_BUSY_TX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ return HAL_ERROR;
+ }
+
+ /* Get the number of needed Tx buffers for the current frame */
+ if (FrameLength > ETH_TX_BUF_SIZE)
+ {
+ bufcount = FrameLength/ETH_TX_BUF_SIZE;
+ if (FrameLength % ETH_TX_BUF_SIZE)
+ {
+ bufcount++;
+ }
+ }
+ else
+ {
+ bufcount = 1;
+ }
+ if (bufcount == 1)
+ {
+ /* Set LAST and FIRST segment */
+ heth->TxDesc->Status |=ETH_DMATXDESC_FS|ETH_DMATXDESC_LS;
+ /* Set frame size */
+ heth->TxDesc->ControlBufferSize = (FrameLength & ETH_DMATXDESC_TBS1);
+ /* Set Own bit of the Tx descriptor Status: gives the buffer back to ETHERNET DMA */
+ heth->TxDesc->Status |= ETH_DMATXDESC_OWN;
+ /* Point to next descriptor */
+ heth->TxDesc= (ETH_DMADescTypeDef *)(heth->TxDesc->Buffer2NextDescAddr);
+ }
+ else
+ {
+ for (i=0; i< bufcount; i++)
+ {
+ /* Clear FIRST and LAST segment bits */
+ heth->TxDesc->Status &= ~(ETH_DMATXDESC_FS | ETH_DMATXDESC_LS);
+
+ if (i == 0)
+ {
+ /* Setting the first segment bit */
+ heth->TxDesc->Status |= ETH_DMATXDESC_FS;
+ }
+
+ /* Program size */
+ heth->TxDesc->ControlBufferSize = (ETH_TX_BUF_SIZE & ETH_DMATXDESC_TBS1);
+
+ if (i == (bufcount-1))
+ {
+ /* Setting the last segment bit */
+ heth->TxDesc->Status |= ETH_DMATXDESC_LS;
+ size = FrameLength - (bufcount-1)*ETH_TX_BUF_SIZE;
+ heth->TxDesc->ControlBufferSize = (size & ETH_DMATXDESC_TBS1);
+ }
+
+ /* Set Own bit of the Tx descriptor Status: gives the buffer back to ETHERNET DMA */
+ heth->TxDesc->Status |= ETH_DMATXDESC_OWN;
+ /* point to next descriptor */
+ heth->TxDesc = (ETH_DMADescTypeDef *)(heth->TxDesc->Buffer2NextDescAddr);
+ }
+ }
+
+ /* When Tx Buffer unavailable flag is set: clear it and resume transmission */
+ if (((heth->Instance)->DMASR & ETH_DMASR_TBUS) != (uint32_t)RESET)
+ {
+ /* Clear TBUS ETHERNET DMA flag */
+ (heth->Instance)->DMASR = ETH_DMASR_TBUS;
+ /* Resume DMA transmission*/
+ (heth->Instance)->DMATPDR = 0;
+ }
+
+ /* Set ETH HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Checks for received frames.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame(ETH_HandleTypeDef *heth)
+{
+ uint32_t framelength = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Check the ETH state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* Check if segment is not owned by DMA */
+ /* (((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET) && ((heth->RxDesc->Status & ETH_DMARXDESC_LS) != (uint32_t)RESET)) */
+ if(((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET))
+ {
+ /* Check if last segment */
+ if(((heth->RxDesc->Status & ETH_DMARXDESC_LS) != (uint32_t)RESET))
+ {
+ /* increment segment count */
+ (heth->RxFrameInfos).SegCount++;
+
+ /* Check if last segment is first segment: one segment contains the frame */
+ if ((heth->RxFrameInfos).SegCount == 1)
+ {
+ (heth->RxFrameInfos).FSRxDesc =heth->RxDesc;
+ }
+
+ heth->RxFrameInfos.LSRxDesc = heth->RxDesc;
+
+ /* Get the Frame Length of the received packet: substruct 4 bytes of the CRC */
+ framelength = (((heth->RxDesc)->Status & ETH_DMARXDESC_FL) >> ETH_DMARXDESC_FRAMELENGTHSHIFT) - 4;
+ heth->RxFrameInfos.length = framelength;
+
+ /* Get the address of the buffer start address */
+ heth->RxFrameInfos.buffer = ((heth->RxFrameInfos).FSRxDesc)->Buffer1Addr;
+ /* point to next descriptor */
+ heth->RxDesc = (ETH_DMADescTypeDef*) ((heth->RxDesc)->Buffer2NextDescAddr);
+
+ /* Set HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ /* Check if first segment */
+ else if((heth->RxDesc->Status & ETH_DMARXDESC_FS) != (uint32_t)RESET)
+ {
+ (heth->RxFrameInfos).FSRxDesc = heth->RxDesc;
+ (heth->RxFrameInfos).LSRxDesc = NULL;
+ (heth->RxFrameInfos).SegCount = 1;
+ /* Point to next descriptor */
+ heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+ }
+ /* Check if intermediate segment */
+ else
+ {
+ (heth->RxFrameInfos).SegCount++;
+ /* Point to next descriptor */
+ heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+ }
+ }
+
+ /* Set ETH HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_ERROR;
+}
+
+/**
+ * @brief Gets the Received frame in interrupt mode.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame_IT(ETH_HandleTypeDef *heth)
+{
+ uint32_t descriptorscancounter = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set ETH HAL State to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* Scan descriptors owned by CPU */
+ while (((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET) && (descriptorscancounter < ETH_RXBUFNB))
+ {
+ /* Just for security */
+ descriptorscancounter++;
+
+ /* Check if first segment in frame */
+ /* ((heth->RxDesc->Status & ETH_DMARXDESC_FS) != (uint32_t)RESET) && ((heth->RxDesc->Status & ETH_DMARXDESC_LS) == (uint32_t)RESET)) */
+ if((heth->RxDesc->Status & (ETH_DMARXDESC_FS | ETH_DMARXDESC_LS)) == (uint32_t)ETH_DMARXDESC_FS)
+ {
+ heth->RxFrameInfos.FSRxDesc = heth->RxDesc;
+ heth->RxFrameInfos.SegCount = 1;
+ /* Point to next descriptor */
+ heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+ }
+ /* Check if intermediate segment */
+ /* ((heth->RxDesc->Status & ETH_DMARXDESC_LS) == (uint32_t)RESET)&& ((heth->RxDesc->Status & ETH_DMARXDESC_FS) == (uint32_t)RESET)) */
+ else if ((heth->RxDesc->Status & (ETH_DMARXDESC_LS | ETH_DMARXDESC_FS)) == (uint32_t)RESET)
+ {
+ /* Increment segment count */
+ (heth->RxFrameInfos.SegCount)++;
+ /* Point to next descriptor */
+ heth->RxDesc = (ETH_DMADescTypeDef*)(heth->RxDesc->Buffer2NextDescAddr);
+ }
+ /* Should be last segment */
+ else
+ {
+ /* Last segment */
+ heth->RxFrameInfos.LSRxDesc = heth->RxDesc;
+
+ /* Increment segment count */
+ (heth->RxFrameInfos.SegCount)++;
+
+ /* Check if last segment is first segment: one segment contains the frame */
+ if ((heth->RxFrameInfos.SegCount) == 1)
+ {
+ heth->RxFrameInfos.FSRxDesc = heth->RxDesc;
+ }
+
+ /* Get the Frame Length of the received packet: substruct 4 bytes of the CRC */
+ heth->RxFrameInfos.length = (((heth->RxDesc)->Status & ETH_DMARXDESC_FL) >> ETH_DMARXDESC_FRAMELENGTHSHIFT) - 4;
+
+ /* Get the address of the buffer start address */
+ heth->RxFrameInfos.buffer =((heth->RxFrameInfos).FSRxDesc)->Buffer1Addr;
+
+ /* Point to next descriptor */
+ heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+
+ /* Set HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ }
+
+ /* Set HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_ERROR;
+}
+
+/**
+ * @brief This function handles ETH interrupt request.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth)
+{
+ /* Frame received */
+ if (__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_R))
+ {
+ /* Receive complete callback */
+ HAL_ETH_RxCpltCallback(heth);
+
+ /* Clear the Eth DMA Rx IT pending bits */
+ __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_R);
+
+ /* Set HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ }
+ /* Frame transmitted */
+ else if (__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_T))
+ {
+ /* Transfer complete callback */
+ HAL_ETH_TxCpltCallback(heth);
+
+ /* Clear the Eth DMA Tx IT pending bits */
+ __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_T);
+
+ /* Set HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+ }
+
+ /* Clear the interrupt flags */
+ __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_NIS);
+
+ /* ETH DMA Error */
+ if(__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_AIS))
+ {
+ /* Ethernet Error callback */
+ HAL_ETH_ErrorCallback(heth);
+
+ /* Clear the interrupt flags */
+ __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_FLAG_AIS);
+
+ /* Set HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+ }
+}
+
+/**
+ * @brief Tx Transfer completed callbacks.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+__weak void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(heth);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ETH_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+__weak void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(heth);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ETH_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Ethernet transfer error callbacks
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+__weak void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(heth);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ETH_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Reads a PHY register
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param PHYReg PHY register address, is the index of one of the 32 PHY register.
+ * This parameter can be one of the following values:
+ * PHY_BCR: Transceiver Basic Control Register,
+ * PHY_BSR: Transceiver Basic Status Register.
+ * More PHY register could be read depending on the used PHY
+ * @param RegValue PHY register value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue)
+{
+ uint32_t tmpreg = 0;
+ uint32_t tickstart = 0;
+
+ /* Check parameters */
+ assert_param(IS_ETH_PHY_ADDRESS(heth->Init.PhyAddress));
+
+ /* Check the ETH peripheral state */
+ if(heth->State == HAL_ETH_STATE_BUSY_RD)
+ {
+ return HAL_BUSY;
+ }
+ /* Set ETH HAL State to BUSY_RD */
+ heth->State = HAL_ETH_STATE_BUSY_RD;
+
+ /* Get the ETHERNET MACMIIAR value */
+ tmpreg = heth->Instance->MACMIIAR;
+
+ /* Keep only the CSR Clock Range CR[2:0] bits value */
+ tmpreg &= ~ETH_MACMIIAR_CR_MASK;
+
+ /* Prepare the MII address register value */
+ tmpreg |=(((uint32_t)heth->Init.PhyAddress << 11) & ETH_MACMIIAR_PA); /* Set the PHY device address */
+ tmpreg |=(((uint32_t)PHYReg<<6) & ETH_MACMIIAR_MR); /* Set the PHY register address */
+ tmpreg &= ~ETH_MACMIIAR_MW; /* Set the read mode */
+ tmpreg |= ETH_MACMIIAR_MB; /* Set the MII Busy bit */
+
+ /* Write the result value into the MII Address register */
+ heth->Instance->MACMIIAR = tmpreg;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Check for the Busy flag */
+ while((tmpreg & ETH_MACMIIAR_MB) == ETH_MACMIIAR_MB)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > PHY_READ_TO)
+ {
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ return HAL_TIMEOUT;
+ }
+
+ tmpreg = heth->Instance->MACMIIAR;
+ }
+
+ /* Get MACMIIDR value */
+ *RegValue = (uint16_t)(heth->Instance->MACMIIDR);
+
+ /* Set ETH HAL State to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes to a PHY register.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param PHYReg PHY register address, is the index of one of the 32 PHY register.
+ * This parameter can be one of the following values:
+ * PHY_BCR: Transceiver Control Register.
+ * More PHY register could be written depending on the used PHY
+ * @param RegValue the value to write
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t RegValue)
+{
+ uint32_t tmpreg = 0;
+ uint32_t tickstart = 0;
+
+ /* Check parameters */
+ assert_param(IS_ETH_PHY_ADDRESS(heth->Init.PhyAddress));
+
+ /* Check the ETH peripheral state */
+ if(heth->State == HAL_ETH_STATE_BUSY_WR)
+ {
+ return HAL_BUSY;
+ }
+ /* Set ETH HAL State to BUSY_WR */
+ heth->State = HAL_ETH_STATE_BUSY_WR;
+
+ /* Get the ETHERNET MACMIIAR value */
+ tmpreg = heth->Instance->MACMIIAR;
+
+ /* Keep only the CSR Clock Range CR[2:0] bits value */
+ tmpreg &= ~ETH_MACMIIAR_CR_MASK;
+
+ /* Prepare the MII register address value */
+ tmpreg |=(((uint32_t)heth->Init.PhyAddress<<11) & ETH_MACMIIAR_PA); /* Set the PHY device address */
+ tmpreg |=(((uint32_t)PHYReg<<6) & ETH_MACMIIAR_MR); /* Set the PHY register address */
+ tmpreg |= ETH_MACMIIAR_MW; /* Set the write mode */
+ tmpreg |= ETH_MACMIIAR_MB; /* Set the MII Busy bit */
+
+ /* Give the value to the MII data register */
+ heth->Instance->MACMIIDR = (uint16_t)RegValue;
+
+ /* Write the result value into the MII Address register */
+ heth->Instance->MACMIIAR = tmpreg;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Check for the Busy flag */
+ while((tmpreg & ETH_MACMIIAR_MB) == ETH_MACMIIAR_MB)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > PHY_WRITE_TO)
+ {
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ return HAL_TIMEOUT;
+ }
+
+ tmpreg = heth->Instance->MACMIIAR;
+ }
+
+ /* Set ETH HAL State to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Enable MAC and DMA transmission and reception.
+ HAL_ETH_Start();
+ (+) Disable MAC and DMA transmission and reception.
+ HAL_ETH_Stop();
+ (+) Set the MAC configuration in runtime mode
+ HAL_ETH_ConfigMAC();
+ (+) Set the DMA configuration in runtime mode
+ HAL_ETH_ConfigDMA();
+
+@endverbatim
+ * @{
+ */
+
+ /**
+ * @brief Enables Ethernet MAC and DMA reception/transmission
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth)
+{
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* Enable transmit state machine of the MAC for transmission on the MII */
+ ETH_MACTransmissionEnable(heth);
+
+ /* Enable receive state machine of the MAC for reception from the MII */
+ ETH_MACReceptionEnable(heth);
+
+ /* Flush Transmit FIFO */
+ ETH_FlushTransmitFIFO(heth);
+
+ /* Start DMA transmission */
+ ETH_DMATransmissionEnable(heth);
+
+ /* Start DMA reception */
+ ETH_DMAReceptionEnable(heth);
+
+ /* Set the ETH state to READY*/
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop Ethernet MAC and DMA reception/transmission
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth)
+{
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* Stop DMA transmission */
+ ETH_DMATransmissionDisable(heth);
+
+ /* Stop DMA reception */
+ ETH_DMAReceptionDisable(heth);
+
+ /* Disable receive state machine of the MAC for reception from the MII */
+ ETH_MACReceptionDisable(heth);
+
+ /* Flush Transmit FIFO */
+ ETH_FlushTransmitFIFO(heth);
+
+ /* Disable transmit state machine of the MAC for transmission on the MII */
+ ETH_MACTransmissionDisable(heth);
+
+ /* Set the ETH state*/
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Set ETH MAC Configuration.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param macconf MAC Configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_ConfigMAC(ETH_HandleTypeDef *heth, ETH_MACInitTypeDef *macconf)
+{
+ uint32_t tmpreg = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State= HAL_ETH_STATE_BUSY;
+
+ assert_param(IS_ETH_SPEED(heth->Init.Speed));
+ assert_param(IS_ETH_DUPLEX_MODE(heth->Init.DuplexMode));
+
+ if (macconf != NULL)
+ {
+ /* Check the parameters */
+ assert_param(IS_ETH_WATCHDOG(macconf->Watchdog));
+ assert_param(IS_ETH_JABBER(macconf->Jabber));
+ assert_param(IS_ETH_INTER_FRAME_GAP(macconf->InterFrameGap));
+ assert_param(IS_ETH_CARRIER_SENSE(macconf->CarrierSense));
+ assert_param(IS_ETH_RECEIVE_OWN(macconf->ReceiveOwn));
+ assert_param(IS_ETH_LOOPBACK_MODE(macconf->LoopbackMode));
+ assert_param(IS_ETH_CHECKSUM_OFFLOAD(macconf->ChecksumOffload));
+ assert_param(IS_ETH_RETRY_TRANSMISSION(macconf->RetryTransmission));
+ assert_param(IS_ETH_AUTOMATIC_PADCRC_STRIP(macconf->AutomaticPadCRCStrip));
+ assert_param(IS_ETH_BACKOFF_LIMIT(macconf->BackOffLimit));
+ assert_param(IS_ETH_DEFERRAL_CHECK(macconf->DeferralCheck));
+ assert_param(IS_ETH_RECEIVE_ALL(macconf->ReceiveAll));
+ assert_param(IS_ETH_SOURCE_ADDR_FILTER(macconf->SourceAddrFilter));
+ assert_param(IS_ETH_CONTROL_FRAMES(macconf->PassControlFrames));
+ assert_param(IS_ETH_BROADCAST_FRAMES_RECEPTION(macconf->BroadcastFramesReception));
+ assert_param(IS_ETH_DESTINATION_ADDR_FILTER(macconf->DestinationAddrFilter));
+ assert_param(IS_ETH_PROMISCUOUS_MODE(macconf->PromiscuousMode));
+ assert_param(IS_ETH_MULTICAST_FRAMES_FILTER(macconf->MulticastFramesFilter));
+ assert_param(IS_ETH_UNICAST_FRAMES_FILTER(macconf->UnicastFramesFilter));
+ assert_param(IS_ETH_PAUSE_TIME(macconf->PauseTime));
+ assert_param(IS_ETH_ZEROQUANTA_PAUSE(macconf->ZeroQuantaPause));
+ assert_param(IS_ETH_PAUSE_LOW_THRESHOLD(macconf->PauseLowThreshold));
+ assert_param(IS_ETH_UNICAST_PAUSE_FRAME_DETECT(macconf->UnicastPauseFrameDetect));
+ assert_param(IS_ETH_RECEIVE_FLOWCONTROL(macconf->ReceiveFlowControl));
+ assert_param(IS_ETH_TRANSMIT_FLOWCONTROL(macconf->TransmitFlowControl));
+ assert_param(IS_ETH_VLAN_TAG_COMPARISON(macconf->VLANTagComparison));
+ assert_param(IS_ETH_VLAN_TAG_IDENTIFIER(macconf->VLANTagIdentifier));
+
+ /*------------------------ ETHERNET MACCR Configuration --------------------*/
+ /* Get the ETHERNET MACCR value */
+ tmpreg = (heth->Instance)->MACCR;
+ /* Clear WD, PCE, PS, TE and RE bits */
+ tmpreg &= ETH_MACCR_CLEAR_MASK;
+
+ tmpreg |= (uint32_t)(macconf->Watchdog |
+ macconf->Jabber |
+ macconf->InterFrameGap |
+ macconf->CarrierSense |
+ (heth->Init).Speed |
+ macconf->ReceiveOwn |
+ macconf->LoopbackMode |
+ (heth->Init).DuplexMode |
+ macconf->ChecksumOffload |
+ macconf->RetryTransmission |
+ macconf->AutomaticPadCRCStrip |
+ macconf->BackOffLimit |
+ macconf->DeferralCheck);
+
+ /* Write to ETHERNET MACCR */
+ (heth->Instance)->MACCR = (uint32_t)tmpreg;
+
+ /* Wait until the write operation will be taken into account :
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg;
+
+ /*----------------------- ETHERNET MACFFR Configuration --------------------*/
+ /* Write to ETHERNET MACFFR */
+ (heth->Instance)->MACFFR = (uint32_t)(macconf->ReceiveAll |
+ macconf->SourceAddrFilter |
+ macconf->PassControlFrames |
+ macconf->BroadcastFramesReception |
+ macconf->DestinationAddrFilter |
+ macconf->PromiscuousMode |
+ macconf->MulticastFramesFilter |
+ macconf->UnicastFramesFilter);
+
+ /* Wait until the write operation will be taken into account :
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACFFR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACFFR = tmpreg;
+
+ /*--------------- ETHERNET MACHTHR and MACHTLR Configuration ---------------*/
+ /* Write to ETHERNET MACHTHR */
+ (heth->Instance)->MACHTHR = (uint32_t)macconf->HashTableHigh;
+
+ /* Write to ETHERNET MACHTLR */
+ (heth->Instance)->MACHTLR = (uint32_t)macconf->HashTableLow;
+ /*----------------------- ETHERNET MACFCR Configuration --------------------*/
+
+ /* Get the ETHERNET MACFCR value */
+ tmpreg = (heth->Instance)->MACFCR;
+ /* Clear xx bits */
+ tmpreg &= ETH_MACFCR_CLEAR_MASK;
+
+ tmpreg |= (uint32_t)((macconf->PauseTime << 16) |
+ macconf->ZeroQuantaPause |
+ macconf->PauseLowThreshold |
+ macconf->UnicastPauseFrameDetect |
+ macconf->ReceiveFlowControl |
+ macconf->TransmitFlowControl);
+
+ /* Write to ETHERNET MACFCR */
+ (heth->Instance)->MACFCR = (uint32_t)tmpreg;
+
+ /* Wait until the write operation will be taken into account :
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACFCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACFCR = tmpreg;
+
+ /*----------------------- ETHERNET MACVLANTR Configuration -----------------*/
+ (heth->Instance)->MACVLANTR = (uint32_t)(macconf->VLANTagComparison |
+ macconf->VLANTagIdentifier);
+
+ /* Wait until the write operation will be taken into account :
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACVLANTR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACVLANTR = tmpreg;
+ }
+ else /* macconf == NULL : here we just configure Speed and Duplex mode */
+ {
+ /*------------------------ ETHERNET MACCR Configuration --------------------*/
+ /* Get the ETHERNET MACCR value */
+ tmpreg = (heth->Instance)->MACCR;
+
+ /* Clear FES and DM bits */
+ tmpreg &= ~((uint32_t)0x00004800);
+
+ tmpreg |= (uint32_t)(heth->Init.Speed | heth->Init.DuplexMode);
+
+ /* Write to ETHERNET MACCR */
+ (heth->Instance)->MACCR = (uint32_t)tmpreg;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg;
+ }
+
+ /* Set the ETH state to Ready */
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets ETH DMA Configuration.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param dmaconf DMA Configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_ConfigDMA(ETH_HandleTypeDef *heth, ETH_DMAInitTypeDef *dmaconf)
+{
+ uint32_t tmpreg = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State= HAL_ETH_STATE_BUSY;
+
+ /* Check parameters */
+ assert_param(IS_ETH_DROP_TCPIP_CHECKSUM_FRAME(dmaconf->DropTCPIPChecksumErrorFrame));
+ assert_param(IS_ETH_RECEIVE_STORE_FORWARD(dmaconf->ReceiveStoreForward));
+ assert_param(IS_ETH_FLUSH_RECEIVE_FRAME(dmaconf->FlushReceivedFrame));
+ assert_param(IS_ETH_TRANSMIT_STORE_FORWARD(dmaconf->TransmitStoreForward));
+ assert_param(IS_ETH_TRANSMIT_THRESHOLD_CONTROL(dmaconf->TransmitThresholdControl));
+ assert_param(IS_ETH_FORWARD_ERROR_FRAMES(dmaconf->ForwardErrorFrames));
+ assert_param(IS_ETH_FORWARD_UNDERSIZED_GOOD_FRAMES(dmaconf->ForwardUndersizedGoodFrames));
+ assert_param(IS_ETH_RECEIVE_THRESHOLD_CONTROL(dmaconf->ReceiveThresholdControl));
+ assert_param(IS_ETH_SECOND_FRAME_OPERATE(dmaconf->SecondFrameOperate));
+ assert_param(IS_ETH_ADDRESS_ALIGNED_BEATS(dmaconf->AddressAlignedBeats));
+ assert_param(IS_ETH_FIXED_BURST(dmaconf->FixedBurst));
+ assert_param(IS_ETH_RXDMA_BURST_LENGTH(dmaconf->RxDMABurstLength));
+ assert_param(IS_ETH_TXDMA_BURST_LENGTH(dmaconf->TxDMABurstLength));
+ assert_param(IS_ETH_ENHANCED_DESCRIPTOR_FORMAT(dmaconf->EnhancedDescriptorFormat));
+ assert_param(IS_ETH_DMA_DESC_SKIP_LENGTH(dmaconf->DescriptorSkipLength));
+ assert_param(IS_ETH_DMA_ARBITRATION_ROUNDROBIN_RXTX(dmaconf->DMAArbitration));
+
+ /*----------------------- ETHERNET DMAOMR Configuration --------------------*/
+ /* Get the ETHERNET DMAOMR value */
+ tmpreg = (heth->Instance)->DMAOMR;
+ /* Clear xx bits */
+ tmpreg &= ETH_DMAOMR_CLEAR_MASK;
+
+ tmpreg |= (uint32_t)(dmaconf->DropTCPIPChecksumErrorFrame |
+ dmaconf->ReceiveStoreForward |
+ dmaconf->FlushReceivedFrame |
+ dmaconf->TransmitStoreForward |
+ dmaconf->TransmitThresholdControl |
+ dmaconf->ForwardErrorFrames |
+ dmaconf->ForwardUndersizedGoodFrames |
+ dmaconf->ReceiveThresholdControl |
+ dmaconf->SecondFrameOperate);
+
+ /* Write to ETHERNET DMAOMR */
+ (heth->Instance)->DMAOMR = (uint32_t)tmpreg;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->DMAOMR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->DMAOMR = tmpreg;
+
+ /*----------------------- ETHERNET DMABMR Configuration --------------------*/
+ (heth->Instance)->DMABMR = (uint32_t)(dmaconf->AddressAlignedBeats |
+ dmaconf->FixedBurst |
+ dmaconf->RxDMABurstLength | /* !! if 4xPBL is selected for Tx or Rx it is applied for the other */
+ dmaconf->TxDMABurstLength |
+ dmaconf->EnhancedDescriptorFormat |
+ (dmaconf->DescriptorSkipLength << 2) |
+ dmaconf->DMAArbitration |
+ ETH_DMABMR_USP); /* Enable use of separate PBL for Rx and Tx */
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->DMABMR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->DMABMR = tmpreg;
+
+ /* Set the ETH state to Ready */
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+ (+) Get the ETH handle state:
+ HAL_ETH_GetState();
+
+
+ @endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the ETH HAL state
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL state
+ */
+HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth)
+{
+ /* Return ETH state */
+ return heth->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup ETH_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Configures Ethernet MAC and DMA with default parameters.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param err Ethernet Init error
+ * @retval HAL status
+ */
+static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth, uint32_t err)
+{
+ ETH_MACInitTypeDef macinit;
+ ETH_DMAInitTypeDef dmainit;
+ uint32_t tmpreg = 0;
+
+ if (err != ETH_SUCCESS) /* Auto-negotiation failed */
+ {
+ /* Set Ethernet duplex mode to Full-duplex */
+ (heth->Init).DuplexMode = ETH_MODE_FULLDUPLEX;
+
+ /* Set Ethernet speed to 100M */
+ (heth->Init).Speed = ETH_SPEED_100M;
+ }
+
+ /* Ethernet MAC default initialization **************************************/
+ macinit.Watchdog = ETH_WATCHDOG_ENABLE;
+ macinit.Jabber = ETH_JABBER_ENABLE;
+ macinit.InterFrameGap = ETH_INTERFRAMEGAP_96BIT;
+ macinit.CarrierSense = ETH_CARRIERSENCE_ENABLE;
+ macinit.ReceiveOwn = ETH_RECEIVEOWN_ENABLE;
+ macinit.LoopbackMode = ETH_LOOPBACKMODE_DISABLE;
+ if(heth->Init.ChecksumMode == ETH_CHECKSUM_BY_HARDWARE)
+ {
+ macinit.ChecksumOffload = ETH_CHECKSUMOFFLAOD_ENABLE;
+ }
+ else
+ {
+ macinit.ChecksumOffload = ETH_CHECKSUMOFFLAOD_DISABLE;
+ }
+ macinit.RetryTransmission = ETH_RETRYTRANSMISSION_DISABLE;
+ macinit.AutomaticPadCRCStrip = ETH_AUTOMATICPADCRCSTRIP_DISABLE;
+ macinit.BackOffLimit = ETH_BACKOFFLIMIT_10;
+ macinit.DeferralCheck = ETH_DEFFERRALCHECK_DISABLE;
+ macinit.ReceiveAll = ETH_RECEIVEAll_DISABLE;
+ macinit.SourceAddrFilter = ETH_SOURCEADDRFILTER_DISABLE;
+ macinit.PassControlFrames = ETH_PASSCONTROLFRAMES_BLOCKALL;
+ macinit.BroadcastFramesReception = ETH_BROADCASTFRAMESRECEPTION_ENABLE;
+ macinit.DestinationAddrFilter = ETH_DESTINATIONADDRFILTER_NORMAL;
+ macinit.PromiscuousMode = ETH_PROMISCUOUS_MODE_DISABLE;
+ macinit.MulticastFramesFilter = ETH_MULTICASTFRAMESFILTER_PERFECT;
+ macinit.UnicastFramesFilter = ETH_UNICASTFRAMESFILTER_PERFECT;
+ macinit.HashTableHigh = 0x0;
+ macinit.HashTableLow = 0x0;
+ macinit.PauseTime = 0x0;
+ macinit.ZeroQuantaPause = ETH_ZEROQUANTAPAUSE_DISABLE;
+ macinit.PauseLowThreshold = ETH_PAUSELOWTHRESHOLD_MINUS4;
+ macinit.UnicastPauseFrameDetect = ETH_UNICASTPAUSEFRAMEDETECT_DISABLE;
+ macinit.ReceiveFlowControl = ETH_RECEIVEFLOWCONTROL_DISABLE;
+ macinit.TransmitFlowControl = ETH_TRANSMITFLOWCONTROL_DISABLE;
+ macinit.VLANTagComparison = ETH_VLANTAGCOMPARISON_16BIT;
+ macinit.VLANTagIdentifier = 0x0;
+
+ /*------------------------ ETHERNET MACCR Configuration --------------------*/
+ /* Get the ETHERNET MACCR value */
+ tmpreg = (heth->Instance)->MACCR;
+ /* Clear WD, PCE, PS, TE and RE bits */
+ tmpreg &= ETH_MACCR_CLEAR_MASK;
+ /* Set the WD bit according to ETH Watchdog value */
+ /* Set the JD: bit according to ETH Jabber value */
+ /* Set the IFG bit according to ETH InterFrameGap value */
+ /* Set the DCRS bit according to ETH CarrierSense value */
+ /* Set the FES bit according to ETH Speed value */
+ /* Set the DO bit according to ETH ReceiveOwn value */
+ /* Set the LM bit according to ETH LoopbackMode value */
+ /* Set the DM bit according to ETH Mode value */
+ /* Set the IPCO bit according to ETH ChecksumOffload value */
+ /* Set the DR bit according to ETH RetryTransmission value */
+ /* Set the ACS bit according to ETH AutomaticPadCRCStrip value */
+ /* Set the BL bit according to ETH BackOffLimit value */
+ /* Set the DC bit according to ETH DeferralCheck value */
+ tmpreg |= (uint32_t)(macinit.Watchdog |
+ macinit.Jabber |
+ macinit.InterFrameGap |
+ macinit.CarrierSense |
+ (heth->Init).Speed |
+ macinit.ReceiveOwn |
+ macinit.LoopbackMode |
+ (heth->Init).DuplexMode |
+ macinit.ChecksumOffload |
+ macinit.RetryTransmission |
+ macinit.AutomaticPadCRCStrip |
+ macinit.BackOffLimit |
+ macinit.DeferralCheck);
+
+ /* Write to ETHERNET MACCR */
+ (heth->Instance)->MACCR = (uint32_t)tmpreg;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg;
+
+ /*----------------------- ETHERNET MACFFR Configuration --------------------*/
+ /* Set the RA bit according to ETH ReceiveAll value */
+ /* Set the SAF and SAIF bits according to ETH SourceAddrFilter value */
+ /* Set the PCF bit according to ETH PassControlFrames value */
+ /* Set the DBF bit according to ETH BroadcastFramesReception value */
+ /* Set the DAIF bit according to ETH DestinationAddrFilter value */
+ /* Set the PR bit according to ETH PromiscuousMode value */
+ /* Set the PM, HMC and HPF bits according to ETH MulticastFramesFilter value */
+ /* Set the HUC and HPF bits according to ETH UnicastFramesFilter value */
+ /* Write to ETHERNET MACFFR */
+ (heth->Instance)->MACFFR = (uint32_t)(macinit.ReceiveAll |
+ macinit.SourceAddrFilter |
+ macinit.PassControlFrames |
+ macinit.BroadcastFramesReception |
+ macinit.DestinationAddrFilter |
+ macinit.PromiscuousMode |
+ macinit.MulticastFramesFilter |
+ macinit.UnicastFramesFilter);
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACFFR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACFFR = tmpreg;
+
+ /*--------------- ETHERNET MACHTHR and MACHTLR Configuration --------------*/
+ /* Write to ETHERNET MACHTHR */
+ (heth->Instance)->MACHTHR = (uint32_t)macinit.HashTableHigh;
+
+ /* Write to ETHERNET MACHTLR */
+ (heth->Instance)->MACHTLR = (uint32_t)macinit.HashTableLow;
+ /*----------------------- ETHERNET MACFCR Configuration -------------------*/
+
+ /* Get the ETHERNET MACFCR value */
+ tmpreg = (heth->Instance)->MACFCR;
+ /* Clear xx bits */
+ tmpreg &= ETH_MACFCR_CLEAR_MASK;
+
+ /* Set the PT bit according to ETH PauseTime value */
+ /* Set the DZPQ bit according to ETH ZeroQuantaPause value */
+ /* Set the PLT bit according to ETH PauseLowThreshold value */
+ /* Set the UP bit according to ETH UnicastPauseFrameDetect value */
+ /* Set the RFE bit according to ETH ReceiveFlowControl value */
+ /* Set the TFE bit according to ETH TransmitFlowControl value */
+ tmpreg |= (uint32_t)((macinit.PauseTime << 16) |
+ macinit.ZeroQuantaPause |
+ macinit.PauseLowThreshold |
+ macinit.UnicastPauseFrameDetect |
+ macinit.ReceiveFlowControl |
+ macinit.TransmitFlowControl);
+
+ /* Write to ETHERNET MACFCR */
+ (heth->Instance)->MACFCR = (uint32_t)tmpreg;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACFCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACFCR = tmpreg;
+
+ /*----------------------- ETHERNET MACVLANTR Configuration ----------------*/
+ /* Set the ETV bit according to ETH VLANTagComparison value */
+ /* Set the VL bit according to ETH VLANTagIdentifier value */
+ (heth->Instance)->MACVLANTR = (uint32_t)(macinit.VLANTagComparison |
+ macinit.VLANTagIdentifier);
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACVLANTR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACVLANTR = tmpreg;
+
+ /* Ethernet DMA default initialization ************************************/
+ dmainit.DropTCPIPChecksumErrorFrame = ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE;
+ dmainit.ReceiveStoreForward = ETH_RECEIVESTOREFORWARD_ENABLE;
+ dmainit.FlushReceivedFrame = ETH_FLUSHRECEIVEDFRAME_ENABLE;
+ dmainit.TransmitStoreForward = ETH_TRANSMITSTOREFORWARD_ENABLE;
+ dmainit.TransmitThresholdControl = ETH_TRANSMITTHRESHOLDCONTROL_64BYTES;
+ dmainit.ForwardErrorFrames = ETH_FORWARDERRORFRAMES_DISABLE;
+ dmainit.ForwardUndersizedGoodFrames = ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE;
+ dmainit.ReceiveThresholdControl = ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES;
+ dmainit.SecondFrameOperate = ETH_SECONDFRAMEOPERARTE_ENABLE;
+ dmainit.AddressAlignedBeats = ETH_ADDRESSALIGNEDBEATS_ENABLE;
+ dmainit.FixedBurst = ETH_FIXEDBURST_ENABLE;
+ dmainit.RxDMABurstLength = ETH_RXDMABURSTLENGTH_32BEAT;
+ dmainit.TxDMABurstLength = ETH_TXDMABURSTLENGTH_32BEAT;
+ dmainit.EnhancedDescriptorFormat = ETH_DMAENHANCEDDESCRIPTOR_ENABLE;
+ dmainit.DescriptorSkipLength = 0x0;
+ dmainit.DMAArbitration = ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1;
+
+ /* Get the ETHERNET DMAOMR value */
+ tmpreg = (heth->Instance)->DMAOMR;
+ /* Clear xx bits */
+ tmpreg &= ETH_DMAOMR_CLEAR_MASK;
+
+ /* Set the DT bit according to ETH DropTCPIPChecksumErrorFrame value */
+ /* Set the RSF bit according to ETH ReceiveStoreForward value */
+ /* Set the DFF bit according to ETH FlushReceivedFrame value */
+ /* Set the TSF bit according to ETH TransmitStoreForward value */
+ /* Set the TTC bit according to ETH TransmitThresholdControl value */
+ /* Set the FEF bit according to ETH ForwardErrorFrames value */
+ /* Set the FUF bit according to ETH ForwardUndersizedGoodFrames value */
+ /* Set the RTC bit according to ETH ReceiveThresholdControl value */
+ /* Set the OSF bit according to ETH SecondFrameOperate value */
+ tmpreg |= (uint32_t)(dmainit.DropTCPIPChecksumErrorFrame |
+ dmainit.ReceiveStoreForward |
+ dmainit.FlushReceivedFrame |
+ dmainit.TransmitStoreForward |
+ dmainit.TransmitThresholdControl |
+ dmainit.ForwardErrorFrames |
+ dmainit.ForwardUndersizedGoodFrames |
+ dmainit.ReceiveThresholdControl |
+ dmainit.SecondFrameOperate);
+
+ /* Write to ETHERNET DMAOMR */
+ (heth->Instance)->DMAOMR = (uint32_t)tmpreg;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->DMAOMR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->DMAOMR = tmpreg;
+
+ /*----------------------- ETHERNET DMABMR Configuration ------------------*/
+ /* Set the AAL bit according to ETH AddressAlignedBeats value */
+ /* Set the FB bit according to ETH FixedBurst value */
+ /* Set the RPBL and 4*PBL bits according to ETH RxDMABurstLength value */
+ /* Set the PBL and 4*PBL bits according to ETH TxDMABurstLength value */
+ /* Set the Enhanced DMA descriptors bit according to ETH EnhancedDescriptorFormat value*/
+ /* Set the DSL bit according to ETH DesciptorSkipLength value */
+ /* Set the PR and DA bits according to ETH DMAArbitration value */
+ (heth->Instance)->DMABMR = (uint32_t)(dmainit.AddressAlignedBeats |
+ dmainit.FixedBurst |
+ dmainit.RxDMABurstLength | /* !! if 4xPBL is selected for Tx or Rx it is applied for the other */
+ dmainit.TxDMABurstLength |
+ dmainit.EnhancedDescriptorFormat |
+ (dmainit.DescriptorSkipLength << 2) |
+ dmainit.DMAArbitration |
+ ETH_DMABMR_USP); /* Enable use of separate PBL for Rx and Tx */
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->DMABMR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->DMABMR = tmpreg;
+
+ if((heth->Init).RxMode == ETH_RXINTERRUPT_MODE)
+ {
+ /* Enable the Ethernet Rx Interrupt */
+ __HAL_ETH_DMA_ENABLE_IT((heth), ETH_DMA_IT_NIS | ETH_DMA_IT_R);
+ }
+
+ /* Initialize MAC address in ethernet MAC */
+ ETH_MACAddressConfig(heth, ETH_MAC_ADDRESS0, heth->Init.MACAddr);
+}
+
+/**
+ * @brief Configures the selected MAC address.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param MacAddr The MAC address to configure
+ * This parameter can be one of the following values:
+ * @arg ETH_MAC_Address0: MAC Address0
+ * @arg ETH_MAC_Address1: MAC Address1
+ * @arg ETH_MAC_Address2: MAC Address2
+ * @arg ETH_MAC_Address3: MAC Address3
+ * @param Addr Pointer to MAC address buffer data (6 bytes)
+ * @retval HAL status
+ */
+static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr)
+{
+ uint32_t tmpreg;
+
+ /* Check the parameters */
+ assert_param(IS_ETH_MAC_ADDRESS0123(MacAddr));
+
+ /* Calculate the selected MAC address high register */
+ tmpreg = ((uint32_t)Addr[5] << 8) | (uint32_t)Addr[4];
+ /* Load the selected MAC address high register */
+ (*(__IO uint32_t *)((uint32_t)(ETH_MAC_ADDR_HBASE + MacAddr))) = tmpreg;
+ /* Calculate the selected MAC address low register */
+ tmpreg = ((uint32_t)Addr[3] << 24) | ((uint32_t)Addr[2] << 16) | ((uint32_t)Addr[1] << 8) | Addr[0];
+
+ /* Load the selected MAC address low register */
+ (*(__IO uint32_t *)((uint32_t)(ETH_MAC_ADDR_LBASE + MacAddr))) = tmpreg;
+}
+
+/**
+ * @brief Enables the MAC transmission.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_MACTransmissionEnable(ETH_HandleTypeDef *heth)
+{
+ __IO uint32_t tmpreg = 0;
+
+ /* Enable the MAC transmission */
+ (heth->Instance)->MACCR |= ETH_MACCR_TE;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg;
+}
+
+/**
+ * @brief Disables the MAC transmission.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_MACTransmissionDisable(ETH_HandleTypeDef *heth)
+{
+ __IO uint32_t tmpreg = 0;
+
+ /* Disable the MAC transmission */
+ (heth->Instance)->MACCR &= ~ETH_MACCR_TE;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg;
+}
+
+/**
+ * @brief Enables the MAC reception.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_MACReceptionEnable(ETH_HandleTypeDef *heth)
+{
+ __IO uint32_t tmpreg = 0;
+
+ /* Enable the MAC reception */
+ (heth->Instance)->MACCR |= ETH_MACCR_RE;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg;
+}
+
+/**
+ * @brief Disables the MAC reception.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_MACReceptionDisable(ETH_HandleTypeDef *heth)
+{
+ __IO uint32_t tmpreg = 0;
+
+ /* Disable the MAC reception */
+ (heth->Instance)->MACCR &= ~ETH_MACCR_RE;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg;
+}
+
+/**
+ * @brief Enables the DMA transmission.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_DMATransmissionEnable(ETH_HandleTypeDef *heth)
+{
+ /* Enable the DMA transmission */
+ (heth->Instance)->DMAOMR |= ETH_DMAOMR_ST;
+}
+
+/**
+ * @brief Disables the DMA transmission.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_DMATransmissionDisable(ETH_HandleTypeDef *heth)
+{
+ /* Disable the DMA transmission */
+ (heth->Instance)->DMAOMR &= ~ETH_DMAOMR_ST;
+}
+
+/**
+ * @brief Enables the DMA reception.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_DMAReceptionEnable(ETH_HandleTypeDef *heth)
+{
+ /* Enable the DMA reception */
+ (heth->Instance)->DMAOMR |= ETH_DMAOMR_SR;
+}
+
+/**
+ * @brief Disables the DMA reception.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_DMAReceptionDisable(ETH_HandleTypeDef *heth)
+{
+ /* Disable the DMA reception */
+ (heth->Instance)->DMAOMR &= ~ETH_DMAOMR_SR;
+}
+
+/**
+ * @brief Clears the ETHERNET transmit FIFO.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth)
+{
+ __IO uint32_t tmpreg = 0;
+
+ /* Set the Flush Transmit FIFO bit */
+ (heth->Instance)->DMAOMR |= ETH_DMAOMR_FTF;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->DMAOMR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->DMAOMR = tmpreg;
+}
+
+/**
+ * @}
+ */
+
+#endif /* ETH */
+#endif /* HAL_ETH_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c
new file mode 100644
index 00000000..556f0d2a
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c
@@ -0,0 +1,833 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_flash.c
+ * @author MCD Application Team
+ * @brief FLASH HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the internal FLASH memory:
+ * + Program operations functions
+ * + Memory Control functions
+ * + Peripheral Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### FLASH peripheral features #####
+ ==============================================================================
+
+ [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses
+ to the Flash memory. It implements the erase and program Flash memory operations
+ and the read and write protection mechanisms.
+
+ [..] The Flash memory interface accelerates code execution with a system of instruction
+ prefetch and cache lines.
+
+ [..] The FLASH main features are:
+ (+) Flash memory read operations
+ (+) Flash memory program/erase operations
+ (+) Read / write protections
+ (+) Prefetch on I-Code
+ (+) 64 cache lines of 128 bits on I-Code
+ (+) 8 cache lines of 128 bits on D-Code
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver provides functions and macros to configure and program the FLASH
+ memory of all STM32F7xx devices.
+
+ (#) FLASH Memory IO Programming functions:
+ (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and
+ HAL_FLASH_Lock() functions
+ (++) Program functions: byte, half word, word and double word
+ (++) There Two modes of programming :
+ (+++) Polling mode using HAL_FLASH_Program() function
+ (+++) Interrupt mode using HAL_FLASH_Program_IT() function
+
+ (#) Interrupts and flags management functions :
+ (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler()
+ (++) Wait for last FLASH operation according to its status
+ (++) Get error flag status by calling HAL_SetErrorCode()
+ [..]
+ In addition to these functions, this driver includes a set of macros allowing
+ to handle the following operations:
+ (+) Set the latency
+ (+) Enable/Disable the prefetch buffer
+ (+) Enable/Disable the Instruction cache and the Data cache
+ (+) Reset the Instruction cache and the Data cache
+ (+) Enable/Disable the FLASH interrupts
+ (+) Monitor the FLASH flags status
+ [..]
+ (@) For any Flash memory program operation (erase or program), the CPU clock frequency
+ (HCLK) must be at least 1MHz.
+ (@) The contents of the Flash memory are not guaranteed if a device reset occurs during
+ a Flash memory operation.
+ (@) Any attempt to read the Flash memory while it is being written or erased, causes the
+ bus to stall. Read operations are processed correctly once the program operation has
+ completed. This means that code or data fetches cannot be performed while a write/erase
+ operation is ongoing.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup FLASH FLASH
+ * @brief FLASH HAL module driver
+ * @{
+ */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup FLASH_Private_Constants
+ * @{
+ */
+#define SECTOR_MASK ((uint32_t)0xFFFFFF07U)
+#define FLASH_TIMEOUT_VALUE ((uint32_t)50000U)/* 50 s */
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup FLASH_Private_Variables
+ * @{
+ */
+/* Variable used for Erase sectors under interruption */
+FLASH_ProcessTypeDef pFlash;
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup FLASH_Private_Functions
+ * @{
+ */
+/* Program operations */
+static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data);
+static void FLASH_Program_Word(uint32_t Address, uint32_t Data);
+static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data);
+static void FLASH_Program_Byte(uint32_t Address, uint8_t Data);
+static void FLASH_SetErrorCode(void);
+
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Functions FLASH Exported Functions
+ * @{
+ */
+
+/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions
+ * @brief Programming operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Programming operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the FLASH
+ program operations.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Program byte, halfword, word or double word at a specified address
+ * @param TypeProgram Indicate the way to program at a specified address.
+ * This parameter can be a value of @ref FLASH_Type_Program
+ * @param Address specifies the address to be programmed.
+ * @param Data specifies the data to be programmed
+ *
+ * @retval HAL_StatusTypeDef HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ switch(TypeProgram)
+ {
+ case FLASH_TYPEPROGRAM_BYTE :
+ {
+ /*Program byte (8-bit) at a specified address.*/
+ FLASH_Program_Byte(Address, (uint8_t) Data);
+ break;
+ }
+
+ case FLASH_TYPEPROGRAM_HALFWORD :
+ {
+ /*Program halfword (16-bit) at a specified address.*/
+ FLASH_Program_HalfWord(Address, (uint16_t) Data);
+ break;
+ }
+
+ case FLASH_TYPEPROGRAM_WORD :
+ {
+ /*Program word (32-bit) at a specified address.*/
+ FLASH_Program_Word(Address, (uint32_t) Data);
+ break;
+ }
+
+ case FLASH_TYPEPROGRAM_DOUBLEWORD :
+ {
+ /*Program double word (64-bit) at a specified address.*/
+ FLASH_Program_DoubleWord(Address, Data);
+ break;
+ }
+ default :
+ break;
+ }
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* If the program operation is completed, disable the PG Bit */
+ FLASH->CR &= (~FLASH_CR_PG);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+
+ return status;
+}
+
+/**
+ * @brief Program byte, halfword, word or double word at a specified address with interrupt enabled.
+ * @param TypeProgram Indicate the way to program at a specified address.
+ * This parameter can be a value of @ref FLASH_Type_Program
+ * @param Address specifies the address to be programmed.
+ * @param Data specifies the data to be programmed
+ *
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+
+ /* Enable End of FLASH Operation interrupt */
+ __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP);
+
+ /* Enable Error source interrupt */
+ __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR);
+
+ /* Clear pending flags (if any) */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |\
+ FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR| FLASH_FLAG_ERSERR);
+
+ pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM;
+ pFlash.Address = Address;
+
+ switch(TypeProgram)
+ {
+ case FLASH_TYPEPROGRAM_BYTE :
+ {
+ /*Program byte (8-bit) at a specified address.*/
+ FLASH_Program_Byte(Address, (uint8_t) Data);
+ break;
+ }
+
+ case FLASH_TYPEPROGRAM_HALFWORD :
+ {
+ /*Program halfword (16-bit) at a specified address.*/
+ FLASH_Program_HalfWord(Address, (uint16_t) Data);
+ break;
+ }
+
+ case FLASH_TYPEPROGRAM_WORD :
+ {
+ /*Program word (32-bit) at a specified address.*/
+ FLASH_Program_Word(Address, (uint32_t) Data);
+ break;
+ }
+
+ case FLASH_TYPEPROGRAM_DOUBLEWORD :
+ {
+ /*Program double word (64-bit) at a specified address.*/
+ FLASH_Program_DoubleWord(Address, Data);
+ break;
+ }
+ default :
+ break;
+ }
+ return status;
+}
+
+/**
+ * @brief This function handles FLASH interrupt request.
+ * @retval None
+ */
+void HAL_FLASH_IRQHandler(void)
+{
+ uint32_t temp = 0;
+
+ /* If the program operation is completed, disable the PG Bit */
+ FLASH->CR &= (~FLASH_CR_PG);
+
+ /* If the erase operation is completed, disable the SER Bit */
+ FLASH->CR &= (~FLASH_CR_SER);
+ FLASH->CR &= SECTOR_MASK;
+
+ /* if the erase operation is completed, disable the MER Bit */
+ FLASH->CR &= (~FLASH_MER_BIT);
+
+ /* Check FLASH End of Operation flag */
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET)
+ {
+ /* Clear FLASH End of Operation pending bit */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+
+ switch (pFlash.ProcedureOnGoing)
+ {
+ case FLASH_PROC_SECTERASE :
+ {
+ /* Nb of sector to erased can be decreased */
+ pFlash.NbSectorsToErase--;
+
+ /* Check if there are still sectors to erase */
+ if(pFlash.NbSectorsToErase != 0)
+ {
+ temp = pFlash.Sector;
+ /* Indicate user which sector has been erased */
+ HAL_FLASH_EndOfOperationCallback(temp);
+
+ /* Increment sector number */
+ temp = ++pFlash.Sector;
+ FLASH_Erase_Sector(temp, pFlash.VoltageForErase);
+ }
+ else
+ {
+ /* No more sectors to Erase, user callback can be called.*/
+ /* Reset Sector and stop Erase sectors procedure */
+ pFlash.Sector = temp = 0xFFFFFFFFU;
+ /* FLASH EOP interrupt user callback */
+ HAL_FLASH_EndOfOperationCallback(temp);
+ /* Sector Erase procedure is completed */
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ }
+ break;
+ }
+
+ case FLASH_PROC_MASSERASE :
+ {
+ /* MassErase ended. Return the selected bank : in this product we don't have Banks */
+ /* FLASH EOP interrupt user callback */
+ HAL_FLASH_EndOfOperationCallback(0);
+ /* MAss Erase procedure is completed */
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ break;
+ }
+
+ case FLASH_PROC_PROGRAM :
+ {
+ /*Program ended. Return the selected address*/
+ /* FLASH EOP interrupt user callback */
+ HAL_FLASH_EndOfOperationCallback(pFlash.Address);
+ /* Programming procedure is completed */
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ break;
+ }
+ default :
+ break;
+ }
+ }
+
+ /* Check FLASH operation error flags */
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_ALL_ERRORS) != RESET)
+ {
+ switch (pFlash.ProcedureOnGoing)
+ {
+ case FLASH_PROC_SECTERASE :
+ {
+ /* return the faulty sector */
+ temp = pFlash.Sector;
+ pFlash.Sector = 0xFFFFFFFFU;
+ break;
+ }
+ case FLASH_PROC_MASSERASE :
+ {
+ /* No return in case of Mass Erase */
+ temp = 0;
+ break;
+ }
+ case FLASH_PROC_PROGRAM :
+ {
+ /*return the faulty address*/
+ temp = pFlash.Address;
+ break;
+ }
+ default :
+ break;
+ }
+ /*Save the Error code*/
+ FLASH_SetErrorCode();
+
+ /* FLASH error interrupt user callback */
+ HAL_FLASH_OperationErrorCallback(temp);
+
+ /*Stop the procedure ongoing */
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ }
+
+ if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE)
+ {
+ /* Disable End of FLASH Operation interrupt */
+ __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP);
+
+ /* Disable Error source interrupt */
+ __HAL_FLASH_DISABLE_IT(FLASH_IT_ERR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+ }
+
+}
+
+/**
+ * @brief FLASH end of operation interrupt callback
+ * @param ReturnValue The value saved in this parameter depends on the ongoing procedure
+ * - Sectors Erase: Sector which has been erased (if 0xFFFFFFFF, it means that
+ * all the selected sectors have been erased)
+ * - Program : Address which was selected for data program
+ * - Mass Erase : No return value expected
+ * @retval None
+ */
+__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(ReturnValue);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief FLASH operation error interrupt callback
+ * @param ReturnValue The value saved in this parameter depends on the ongoing procedure
+ * - Sectors Erase: Sector which has been erased (if 0xFFFFFFFF, it means that
+ * all the selected sectors have been erased)
+ * - Program : Address which was selected for data program
+ * - Mass Erase : No return value expected
+ * @retval None
+ */
+__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(ReturnValue);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_FLASH_OperationErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions
+ * @brief management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the FLASH
+ memory operations.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Unlock the FLASH control register access
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Unlock(void)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET)
+ {
+ /* Authorize the FLASH Registers access */
+ WRITE_REG(FLASH->KEYR, FLASH_KEY1);
+ WRITE_REG(FLASH->KEYR, FLASH_KEY2);
+
+ /* Verify Flash is unlocked */
+ if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET)
+ {
+ status = HAL_ERROR;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * @brief Locks the FLASH control register access
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Lock(void)
+{
+ /* Set the LOCK Bit to lock the FLASH Registers access */
+ FLASH->CR |= FLASH_CR_LOCK;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Unlock the FLASH Option Control Registers access.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
+{
+ if((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET)
+ {
+ /* Authorizes the Option Byte register programming */
+ FLASH->OPTKEYR = FLASH_OPT_KEY1;
+ FLASH->OPTKEYR = FLASH_OPT_KEY2;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Lock the FLASH Option Control Registers access.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
+{
+ /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */
+ FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Launch the option byte loading.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
+{
+ /* Set the OPTSTRT bit in OPTCR register */
+ FLASH->OPTCR |= FLASH_OPTCR_OPTSTRT;
+
+ /* Wait for last operation to be completed */
+ return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief Peripheral Errors functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time Errors of the FLASH peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Get the specific FLASH error flag.
+ * @retval FLASH_ErrorCode: The returned value can be:
+ * @arg FLASH_ERROR_ERS: FLASH Erasing Sequence error flag
+ * @arg FLASH_ERROR_PGP: FLASH Programming Parallelism error flag
+ * @arg FLASH_ERROR_PGA: FLASH Programming Alignment error flag
+ * @arg FLASH_ERROR_WRP: FLASH Write protected error flag
+ * @arg FLASH_ERROR_OPERATION: FLASH operation Error flag
+ */
+uint32_t HAL_FLASH_GetError(void)
+{
+ return pFlash.ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief Wait for a FLASH operation to complete.
+ * @param Timeout maximum flash operationtimeout
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ /* Clear Error Code */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
+ Even if the FLASH operation fails, the BUSY flag will be reset and an error
+ flag will be set */
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_ALL_ERRORS) != RESET)
+ {
+ /*Save the error code*/
+ FLASH_SetErrorCode();
+ return HAL_ERROR;
+ }
+
+ /* Check FLASH End of Operation flag */
+ if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET)
+ {
+ /* Clear FLASH End of Operation pending bit */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+ }
+
+ /* If there is an error flag set */
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Program a double word (64-bit) at a specified address.
+ * @note This function must be used when the device voltage range is from
+ * 2.7V to 3.6V and an External Vpp is present.
+ *
+ * @note If an erase and a program operations are requested simultaneously,
+ * the erase operation is performed before the program one.
+ *
+ * @param Address specifies the address to be programmed.
+ * @param Data specifies the data to be programmed.
+ * @retval None
+ */
+static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+ /* If the previous operation is completed, proceed to program the new data */
+ FLASH->CR &= CR_PSIZE_MASK;
+ FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD;
+ FLASH->CR |= FLASH_CR_PG;
+
+ /* Program the double-word */
+ *(__IO uint32_t*)Address = (uint32_t)Data;
+ *(__IO uint32_t*)(Address+4) = (uint32_t)(Data >> 32);
+
+ /* Data synchronous Barrier (DSB) Just after the write operation
+ This will force the CPU to respect the sequence of instruction (no optimization).*/
+ __DSB();
+}
+
+
+/**
+ * @brief Program word (32-bit) at a specified address.
+ * @note This function must be used when the device voltage range is from
+ * 2.7V to 3.6V.
+ *
+ * @note If an erase and a program operations are requested simultaneously,
+ * the erase operation is performed before the program one.
+ *
+ * @param Address specifies the address to be programmed.
+ * @param Data specifies the data to be programmed.
+ * @retval None
+ */
+static void FLASH_Program_Word(uint32_t Address, uint32_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+ /* If the previous operation is completed, proceed to program the new data */
+ FLASH->CR &= CR_PSIZE_MASK;
+ FLASH->CR |= FLASH_PSIZE_WORD;
+ FLASH->CR |= FLASH_CR_PG;
+
+ *(__IO uint32_t*)Address = Data;
+
+ /* Data synchronous Barrier (DSB) Just after the write operation
+ This will force the CPU to respect the sequence of instruction (no optimization).*/
+ __DSB();
+}
+
+/**
+ * @brief Program a half-word (16-bit) at a specified address.
+ * @note This function must be used when the device voltage range is from
+ * 2.7V to 3.6V.
+ *
+ * @note If an erase and a program operations are requested simultaneously,
+ * the erase operation is performed before the program one.
+ *
+ * @param Address specifies the address to be programmed.
+ * @param Data specifies the data to be programmed.
+ * @retval None
+ */
+static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+ /* If the previous operation is completed, proceed to program the new data */
+ FLASH->CR &= CR_PSIZE_MASK;
+ FLASH->CR |= FLASH_PSIZE_HALF_WORD;
+ FLASH->CR |= FLASH_CR_PG;
+
+ *(__IO uint16_t*)Address = Data;
+
+ /* Data synchronous Barrier (DSB) Just after the write operation
+ This will force the CPU to respect the sequence of instruction (no optimization).*/
+ __DSB();
+
+}
+
+/**
+ * @brief Program byte (8-bit) at a specified address.
+ * @note This function must be used when the device voltage range is from
+ * 2.7V to 3.6V.
+ *
+ * @note If an erase and a program operations are requested simultaneously,
+ * the erase operation is performed before the program one.
+ *
+ * @param Address specifies the address to be programmed.
+ * @param Data specifies the data to be programmed.
+ * @retval None
+ */
+static void FLASH_Program_Byte(uint32_t Address, uint8_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+ /* If the previous operation is completed, proceed to program the new data */
+ FLASH->CR &= CR_PSIZE_MASK;
+ FLASH->CR |= FLASH_PSIZE_BYTE;
+ FLASH->CR |= FLASH_CR_PG;
+
+ *(__IO uint8_t*)Address = Data;
+
+ /* Data synchronous Barrier (DSB) Just after the write operation
+ This will force the CPU to respect the sequence of instruction (no optimization).*/
+ __DSB();
+}
+
+/**
+ * @brief Set the specific FLASH error flag.
+ * @retval None
+ */
+static void FLASH_SetErrorCode(void)
+{
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR) != RESET)
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_OPERATION;
+ }
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET)
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP;
+ }
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET)
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA;
+ }
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR) != RESET)
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_PGP;
+ }
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_ERSERR) != RESET)
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_ERS;
+ }
+
+#if defined (FLASH_OPTCR2_PCROP)
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) != RESET)
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_RD;
+ }
+#endif /* FLASH_OPTCR2_PCROP */
+
+ /* Clear error programming flags */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_ALL_ERRORS);
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c
new file mode 100644
index 00000000..c4d66b06
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c
@@ -0,0 +1,1138 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_flash_ex.c
+ * @author MCD Application Team
+ * @brief Extended FLASH HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the FLASH extension peripheral:
+ * + Extended programming operations functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### Flash Extension features #####
+ ==============================================================================
+
+ [..] Comparing to other previous devices, the FLASH interface for STM32F76xx/STM32F77xx
+ devices contains the following additional features
+
+ (+) Capacity up to 2 Mbyte with dual bank architecture supporting read-while-write
+ capability (RWW)
+ (+) Dual bank memory organization
+ (+) Dual boot mode
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..] This driver provides functions to configure and program the FLASH memory
+ of all STM32F7xx devices. It includes
+ (#) FLASH Memory Erase functions:
+ (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and
+ HAL_FLASH_Lock() functions
+ (++) Erase function: Erase sector, erase all sectors
+ (++) There are two modes of erase :
+ (+++) Polling Mode using HAL_FLASHEx_Erase()
+ (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT()
+
+ (#) Option Bytes Programming functions: Use HAL_FLASHEx_OBProgram() to :
+ (++) Set/Reset the write protection
+ (++) Set the Read protection Level
+ (++) Set the BOR level
+ (++) Program the user Option Bytes
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup FLASHEx FLASHEx
+ * @brief FLASH HAL Extension module driver
+ * @{
+ */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup FLASHEx_Private_Constants
+ * @{
+ */
+#define SECTOR_MASK 0xFFFFFF07U
+#define FLASH_TIMEOUT_VALUE 50000U/* 50 s */
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup FLASHEx_Private_Variables
+ * @{
+ */
+extern FLASH_ProcessTypeDef pFlash;
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup FLASHEx_Private_Functions
+ * @{
+ */
+/* Option bytes control */
+static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector);
+static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector);
+static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level);
+static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level);
+static HAL_StatusTypeDef FLASH_OB_BootAddressConfig(uint32_t BootOption, uint32_t Address);
+static uint32_t FLASH_OB_GetUser(void);
+static uint32_t FLASH_OB_GetWRP(void);
+static uint8_t FLASH_OB_GetRDP(void);
+static uint32_t FLASH_OB_GetBOR(void);
+static uint32_t FLASH_OB_GetBootAddress(uint32_t BootOption);
+
+#if defined (FLASH_OPTCR_nDBANK)
+static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks);
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint32_t Wwdg, uint32_t Iwdg, uint32_t Stop, uint32_t Stdby, uint32_t Iwdgstop, \
+ uint32_t Iwdgstdby, uint32_t NDBank, uint32_t NDBoot);
+#else
+static void FLASH_MassErase(uint8_t VoltageRange);
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint32_t Wwdg, uint32_t Iwdg, uint32_t Stop, uint32_t Stdby, uint32_t Iwdgstop, uint32_t Iwdgstdby);
+#endif /* FLASH_OPTCR_nDBANK */
+
+#if defined (FLASH_OPTCR2_PCROP)
+static HAL_StatusTypeDef FLASH_OB_PCROP_Config(uint32_t PCROPSector);
+static HAL_StatusTypeDef FLASH_OB_PCROP_RDP_Config(uint32_t Pcrop_Rdp);
+static uint32_t FLASH_OB_GetPCROP(void);
+static uint32_t FLASH_OB_GetPCROPRDP(void);
+#endif /* FLASH_OPTCR2_PCROP */
+
+extern HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions
+ * @{
+ */
+
+/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions
+ * @brief Extended IO operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended programming operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the Extension FLASH
+ programming operations Operations.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Perform a mass erase or erase the specified FLASH memory sectors
+ * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
+ * contains the configuration information for the erasing.
+ *
+ * @param[out] SectorError pointer to variable that
+ * contains the configuration information on faulty sector in case of error
+ * (0xFFFFFFFF means that all the sectors have been correctly erased)
+ *
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+ uint32_t index = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /*Initialization of SectorError variable*/
+ *SectorError = 0xFFFFFFFFU;
+
+ if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
+ {
+ /*Mass erase to be done*/
+#if defined (FLASH_OPTCR_nDBANK)
+ FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks);
+#else
+ FLASH_MassErase((uint8_t) pEraseInit->VoltageRange);
+#endif /* FLASH_OPTCR_nDBANK */
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* if the erase operation is completed, disable the MER Bit */
+ FLASH->CR &= (~FLASH_MER_BIT);
+ }
+ else
+ {
+ /* Check the parameters */
+ assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector));
+
+ /* Erase by sector by sector to be done*/
+ for(index = pEraseInit->Sector; index < (pEraseInit->NbSectors + pEraseInit->Sector); index++)
+ {
+ FLASH_Erase_Sector(index, (uint8_t) pEraseInit->VoltageRange);
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* If the erase operation is completed, disable the SER Bit and SNB Bits */
+ CLEAR_BIT(FLASH->CR, (FLASH_CR_SER | FLASH_CR_SNB));
+
+ if(status != HAL_OK)
+ {
+ /* In case of error, stop erase procedure and return the faulty sector*/
+ *SectorError = index;
+ break;
+ }
+ }
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+
+ return status;
+}
+
+/**
+ * @brief Perform a mass erase or erase the specified FLASH memory sectors with interrupt enabled
+ * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
+ * contains the configuration information for the erasing.
+ *
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
+
+ /* Enable End of FLASH Operation interrupt */
+ __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP);
+
+ /* Enable Error source interrupt */
+ __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR);
+
+ /* Clear pending flags (if any) */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |\
+ FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR| FLASH_FLAG_ERSERR);
+
+ if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
+ {
+ /*Mass erase to be done*/
+ pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE;
+#if defined (FLASH_OPTCR_nDBANK)
+ FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks);
+#else
+ FLASH_MassErase((uint8_t) pEraseInit->VoltageRange);
+#endif /* FLASH_OPTCR_nDBANK */
+ }
+ else
+ {
+ /* Erase by sector to be done*/
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector));
+
+ pFlash.ProcedureOnGoing = FLASH_PROC_SECTERASE;
+ pFlash.NbSectorsToErase = pEraseInit->NbSectors;
+ pFlash.Sector = pEraseInit->Sector;
+ pFlash.VoltageForErase = (uint8_t)pEraseInit->VoltageRange;
+
+ /*Erase 1st sector and wait for IT*/
+ FLASH_Erase_Sector(pEraseInit->Sector, pEraseInit->VoltageRange);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Program option bytes
+ * @param pOBInit pointer to an FLASH_OBInitStruct structure that
+ * contains the configuration information for the programming.
+ *
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_OPTIONBYTE(pOBInit->OptionType));
+
+ /* Write protection configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP)
+ {
+ assert_param(IS_WRPSTATE(pOBInit->WRPState));
+ if(pOBInit->WRPState == OB_WRPSTATE_ENABLE)
+ {
+ /*Enable of Write protection on the selected Sector*/
+ status = FLASH_OB_EnableWRP(pOBInit->WRPSector);
+ }
+ else
+ {
+ /*Disable of Write protection on the selected Sector*/
+ status = FLASH_OB_DisableWRP(pOBInit->WRPSector);
+ }
+ }
+
+ /* Read protection configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP)
+ {
+ status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel);
+ }
+
+ /* USER configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER)
+ {
+#if defined (FLASH_OPTCR_nDBANK)
+ status = FLASH_OB_UserConfig(pOBInit->USERConfig & OB_WWDG_SW,
+ pOBInit->USERConfig & OB_IWDG_SW,
+ pOBInit->USERConfig & OB_STOP_NO_RST,
+ pOBInit->USERConfig & OB_STDBY_NO_RST,
+ pOBInit->USERConfig & OB_IWDG_STOP_ACTIVE,
+ pOBInit->USERConfig & OB_IWDG_STDBY_ACTIVE,
+ pOBInit->USERConfig & OB_NDBANK_SINGLE_BANK,
+ pOBInit->USERConfig & OB_DUAL_BOOT_DISABLE);
+#else
+ status = FLASH_OB_UserConfig(pOBInit->USERConfig & OB_WWDG_SW,
+ pOBInit->USERConfig & OB_IWDG_SW,
+ pOBInit->USERConfig & OB_STOP_NO_RST,
+ pOBInit->USERConfig & OB_STDBY_NO_RST,
+ pOBInit->USERConfig & OB_IWDG_STOP_ACTIVE,
+ pOBInit->USERConfig & OB_IWDG_STDBY_ACTIVE);
+#endif /* FLASH_OPTCR_nDBANK */
+ }
+
+ /* BOR Level configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_BOR) == OPTIONBYTE_BOR)
+ {
+ status = FLASH_OB_BOR_LevelConfig(pOBInit->BORLevel);
+ }
+
+ /* Boot 0 Address configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_BOOTADDR_0) == OPTIONBYTE_BOOTADDR_0)
+ {
+ status = FLASH_OB_BootAddressConfig(OPTIONBYTE_BOOTADDR_0, pOBInit->BootAddr0);
+ }
+
+ /* Boot 1 Address configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_BOOTADDR_1) == OPTIONBYTE_BOOTADDR_1)
+ {
+ status = FLASH_OB_BootAddressConfig(OPTIONBYTE_BOOTADDR_1, pOBInit->BootAddr1);
+ }
+
+#if defined (FLASH_OPTCR2_PCROP)
+ /* PCROP configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_PCROP) == OPTIONBYTE_PCROP)
+ {
+ status = FLASH_OB_PCROP_Config(pOBInit->PCROPSector);
+ }
+
+ /* PCROP_RDP configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_PCROP_RDP) == OPTIONBYTE_PCROP_RDP)
+ {
+ status = FLASH_OB_PCROP_RDP_Config(pOBInit->PCROPRdp);
+ }
+#endif /* FLASH_OPTCR2_PCROP */
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+
+ return status;
+}
+
+/**
+ * @brief Get the Option byte configuration
+ * @param pOBInit pointer to an FLASH_OBInitStruct structure that
+ * contains the configuration information for the programming.
+ *
+ * @retval None
+ */
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit)
+{
+ pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\
+ OPTIONBYTE_BOR | OPTIONBYTE_BOOTADDR_0 | OPTIONBYTE_BOOTADDR_1;
+
+ /*Get WRP*/
+ pOBInit->WRPSector = FLASH_OB_GetWRP();
+
+ /*Get RDP Level*/
+ pOBInit->RDPLevel = FLASH_OB_GetRDP();
+
+ /*Get USER*/
+ pOBInit->USERConfig = FLASH_OB_GetUser();
+
+ /*Get BOR Level*/
+ pOBInit->BORLevel = FLASH_OB_GetBOR();
+
+ /*Get Boot Address when Boot pin = 0 */
+ pOBInit->BootAddr0 = FLASH_OB_GetBootAddress(OPTIONBYTE_BOOTADDR_0);
+
+ /*Get Boot Address when Boot pin = 1 */
+ pOBInit->BootAddr1 = FLASH_OB_GetBootAddress(OPTIONBYTE_BOOTADDR_1);
+
+#if defined (FLASH_OPTCR2_PCROP)
+ /*Get PCROP Sectors */
+ pOBInit->PCROPSector = FLASH_OB_GetPCROP();
+
+ /*Get PCROP_RDP Value */
+ pOBInit->PCROPRdp = FLASH_OB_GetPCROPRDP();
+#endif /* FLASH_OPTCR2_PCROP */
+}
+/**
+ * @}
+ */
+
+#if defined (FLASH_OPTCR_nDBANK)
+/**
+ * @brief Full erase of FLASH memory sectors
+ * @param VoltageRange The device voltage range which defines the erase parallelism.
+ * This parameter can be one of the following values:
+ * @arg VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
+ * the operation will be done by byte (8-bit)
+ * @arg VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
+ * the operation will be done by half word (16-bit)
+ * @arg VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
+ * the operation will be done by word (32-bit)
+ * @arg VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
+ * the operation will be done by double word (64-bit)
+ * @param Banks Banks to be erased
+ * This parameter can be one of the following values:
+ * @arg FLASH_BANK_1: Bank1 to be erased
+ * @arg FLASH_BANK_2: Bank2 to be erased
+ * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased
+ *
+ * @retval HAL Status
+ */
+static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks)
+{
+ /* Check the parameters */
+ assert_param(IS_VOLTAGERANGE(VoltageRange));
+ assert_param(IS_FLASH_BANK(Banks));
+
+ /* if the previous operation is completed, proceed to erase all sectors */
+ FLASH->CR &= CR_PSIZE_MASK;
+ if(Banks == FLASH_BANK_BOTH)
+ {
+ /* bank1 & bank2 will be erased*/
+ FLASH->CR |= FLASH_MER_BIT;
+ }
+ else if(Banks == FLASH_BANK_2)
+ {
+ /*Only bank2 will be erased*/
+ FLASH->CR |= FLASH_CR_MER2;
+ }
+ else
+ {
+ /*Only bank1 will be erased*/
+ FLASH->CR |= FLASH_CR_MER1;
+ }
+ FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange <<8);
+ /* Data synchronous Barrier (DSB) Just after the write operation
+ This will force the CPU to respect the sequence of instruction (no optimization).*/
+ __DSB();
+}
+
+/**
+ * @brief Erase the specified FLASH memory sector
+ * @param Sector FLASH sector to erase
+ * The value of this parameter depend on device used within the same series
+ * @param VoltageRange The device voltage range which defines the erase parallelism.
+ * This parameter can be one of the following values:
+ * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
+ * the operation will be done by byte (8-bit)
+ * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
+ * the operation will be done by half word (16-bit)
+ * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
+ * the operation will be done by word (32-bit)
+ * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
+ * the operation will be done by double word (64-bit)
+ *
+ * @retval None
+ */
+void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange)
+{
+ uint32_t tmp_psize = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_SECTOR(Sector));
+ assert_param(IS_VOLTAGERANGE(VoltageRange));
+
+ if(VoltageRange == FLASH_VOLTAGE_RANGE_1)
+ {
+ tmp_psize = FLASH_PSIZE_BYTE;
+ }
+ else if(VoltageRange == FLASH_VOLTAGE_RANGE_2)
+ {
+ tmp_psize = FLASH_PSIZE_HALF_WORD;
+ }
+ else if(VoltageRange == FLASH_VOLTAGE_RANGE_3)
+ {
+ tmp_psize = FLASH_PSIZE_WORD;
+ }
+ else
+ {
+ tmp_psize = FLASH_PSIZE_DOUBLE_WORD;
+ }
+
+ /* Need to add offset of 4 when sector higher than FLASH_SECTOR_11 */
+ if(Sector > FLASH_SECTOR_11)
+ {
+ Sector += 4;
+ }
+
+ /* If the previous operation is completed, proceed to erase the sector */
+ FLASH->CR &= CR_PSIZE_MASK;
+ FLASH->CR |= tmp_psize;
+ CLEAR_BIT(FLASH->CR, FLASH_CR_SNB);
+ FLASH->CR |= FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos);
+ FLASH->CR |= FLASH_CR_STRT;
+
+ /* Data synchronous Barrier (DSB) Just after the write operation
+ This will force the CPU to respect the sequence of instruction (no optimization).*/
+ __DSB();
+}
+
+/**
+ * @brief Return the FLASH Write Protection Option Bytes value.
+ * @retval uint32_t FLASH Write Protection Option Bytes value
+ */
+static uint32_t FLASH_OB_GetWRP(void)
+{
+ /* Return the FLASH write protection Register value */
+ return ((uint32_t)(FLASH->OPTCR & 0x0FFF0000));
+}
+
+/**
+ * @brief Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.
+ * @param Wwdg Selects the IWDG mode
+ * This parameter can be one of the following values:
+ * @arg OB_WWDG_SW: Software WWDG selected
+ * @arg OB_WWDG_HW: Hardware WWDG selected
+ * @param Iwdg Selects the WWDG mode
+ * This parameter can be one of the following values:
+ * @arg OB_IWDG_SW: Software IWDG selected
+ * @arg OB_IWDG_HW: Hardware IWDG selected
+ * @param Stop Reset event when entering STOP mode.
+ * This parameter can be one of the following values:
+ * @arg OB_STOP_NO_RST: No reset generated when entering in STOP
+ * @arg OB_STOP_RST: Reset generated when entering in STOP
+ * @param Stdby Reset event when entering Standby mode.
+ * This parameter can be one of the following values:
+ * @arg OB_STDBY_NO_RST: No reset generated when entering in STANDBY
+ * @arg OB_STDBY_RST: Reset generated when entering in STANDBY
+ * @param Iwdgstop Independent watchdog counter freeze in Stop mode.
+ * This parameter can be one of the following values:
+ * @arg OB_IWDG_STOP_FREEZE: Freeze IWDG counter in STOP
+ * @arg OB_IWDG_STOP_ACTIVE: IWDG counter active in STOP
+ * @param Iwdgstdby Independent watchdog counter freeze in standby mode.
+ * This parameter can be one of the following values:
+ * @arg OB_IWDG_STDBY_FREEZE: Freeze IWDG counter in STANDBY
+ * @arg OB_IWDG_STDBY_ACTIVE: IWDG counter active in STANDBY
+ * @param NDBank Flash Single Bank mode enabled.
+ * This parameter can be one of the following values:
+ * @arg OB_NDBANK_SINGLE_BANK: enable 256 bits mode (Flash is a single bank)
+ * @arg OB_NDBANK_DUAL_BANK: disable 256 bits mode (Flash is a dual bank in 128 bits mode)
+ * @param NDBoot Flash Dual boot mode disable.
+ * This parameter can be one of the following values:
+ * @arg OB_DUAL_BOOT_DISABLE: Disable Dual Boot
+ * @arg OB_DUAL_BOOT_ENABLE: Enable Dual Boot
+
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint32_t Wwdg, uint32_t Iwdg, uint32_t Stop, uint32_t Stdby, uint32_t Iwdgstop, \
+ uint32_t Iwdgstdby, uint32_t NDBank, uint32_t NDBoot)
+{
+ uint32_t useroptionmask = 0x00;
+ uint32_t useroptionvalue = 0x00;
+
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_WWDG_SOURCE(Wwdg));
+ assert_param(IS_OB_IWDG_SOURCE(Iwdg));
+ assert_param(IS_OB_STOP_SOURCE(Stop));
+ assert_param(IS_OB_STDBY_SOURCE(Stdby));
+ assert_param(IS_OB_IWDG_STOP_FREEZE(Iwdgstop));
+ assert_param(IS_OB_IWDG_STDBY_FREEZE(Iwdgstdby));
+ assert_param(IS_OB_NDBANK(NDBank));
+ assert_param(IS_OB_NDBOOT(NDBoot));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ useroptionmask = (FLASH_OPTCR_WWDG_SW | FLASH_OPTCR_IWDG_SW | FLASH_OPTCR_nRST_STOP | \
+ FLASH_OPTCR_nRST_STDBY | FLASH_OPTCR_IWDG_STOP | FLASH_OPTCR_IWDG_STDBY | \
+ FLASH_OPTCR_nDBOOT | FLASH_OPTCR_nDBANK);
+
+ useroptionvalue = (Iwdg | Wwdg | Stop | Stdby | Iwdgstop | Iwdgstdby | NDBoot | NDBank);
+
+ /* Update User Option Byte */
+ MODIFY_REG(FLASH->OPTCR, useroptionmask, useroptionvalue);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Return the FLASH User Option Byte value.
+ * @retval uint32_t FLASH User Option Bytes values: WWDG_SW(Bit4), IWDG_SW(Bit5), nRST_STOP(Bit6),
+ * nRST_STDBY(Bit7), nDBOOT(Bit28), nDBANK(Bit29), IWDG_STDBY(Bit30) and IWDG_STOP(Bit31).
+ */
+static uint32_t FLASH_OB_GetUser(void)
+{
+ /* Return the User Option Byte */
+ return ((uint32_t)(FLASH->OPTCR & 0xF00000F0U));
+}
+#else
+
+/**
+ * @brief Full erase of FLASH memory sectors
+ * @param VoltageRange The device voltage range which defines the erase parallelism.
+ * This parameter can be one of the following values:
+ * @arg VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
+ * the operation will be done by byte (8-bit)
+ * @arg VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
+ * the operation will be done by half word (16-bit)
+ * @arg VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
+ * the operation will be done by word (32-bit)
+ * @arg VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
+ * the operation will be done by double word (64-bit)
+ *
+ * @retval HAL Status
+ */
+static void FLASH_MassErase(uint8_t VoltageRange)
+{
+ /* Check the parameters */
+ assert_param(IS_VOLTAGERANGE(VoltageRange));
+
+ /* if the previous operation is completed, proceed to erase all sectors */
+ FLASH->CR &= CR_PSIZE_MASK;
+ FLASH->CR |= FLASH_CR_MER;
+ FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange <<8);
+ /* Data synchronous Barrier (DSB) Just after the write operation
+ This will force the CPU to respect the sequence of instruction (no optimization).*/
+ __DSB();
+}
+
+/**
+ * @brief Erase the specified FLASH memory sector
+ * @param Sector FLASH sector to erase
+ * The value of this parameter depend on device used within the same series
+ * @param VoltageRange The device voltage range which defines the erase parallelism.
+ * This parameter can be one of the following values:
+ * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
+ * the operation will be done by byte (8-bit)
+ * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
+ * the operation will be done by half word (16-bit)
+ * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
+ * the operation will be done by word (32-bit)
+ * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
+ * the operation will be done by double word (64-bit)
+ *
+ * @retval None
+ */
+void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange)
+{
+ uint32_t tmp_psize = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_SECTOR(Sector));
+ assert_param(IS_VOLTAGERANGE(VoltageRange));
+
+ if(VoltageRange == FLASH_VOLTAGE_RANGE_1)
+ {
+ tmp_psize = FLASH_PSIZE_BYTE;
+ }
+ else if(VoltageRange == FLASH_VOLTAGE_RANGE_2)
+ {
+ tmp_psize = FLASH_PSIZE_HALF_WORD;
+ }
+ else if(VoltageRange == FLASH_VOLTAGE_RANGE_3)
+ {
+ tmp_psize = FLASH_PSIZE_WORD;
+ }
+ else
+ {
+ tmp_psize = FLASH_PSIZE_DOUBLE_WORD;
+ }
+
+ /* If the previous operation is completed, proceed to erase the sector */
+ FLASH->CR &= CR_PSIZE_MASK;
+ FLASH->CR |= tmp_psize;
+ FLASH->CR &= SECTOR_MASK;
+ FLASH->CR |= FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos);
+ FLASH->CR |= FLASH_CR_STRT;
+
+ /* Data synchronous Barrier (DSB) Just after the write operation
+ This will force the CPU to respect the sequence of instruction (no optimization).*/
+ __DSB();
+}
+
+/**
+ * @brief Return the FLASH Write Protection Option Bytes value.
+ * @retval uint32_t FLASH Write Protection Option Bytes value
+ */
+static uint32_t FLASH_OB_GetWRP(void)
+{
+ /* Return the FLASH write protection Register value */
+ return ((uint32_t)(FLASH->OPTCR & 0x00FF0000));
+}
+
+/**
+ * @brief Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.
+ * @param Wwdg Selects the IWDG mode
+ * This parameter can be one of the following values:
+ * @arg OB_WWDG_SW: Software WWDG selected
+ * @arg OB_WWDG_HW: Hardware WWDG selected
+ * @param Iwdg Selects the WWDG mode
+ * This parameter can be one of the following values:
+ * @arg OB_IWDG_SW: Software IWDG selected
+ * @arg OB_IWDG_HW: Hardware IWDG selected
+ * @param Stop Reset event when entering STOP mode.
+ * This parameter can be one of the following values:
+ * @arg OB_STOP_NO_RST: No reset generated when entering in STOP
+ * @arg OB_STOP_RST: Reset generated when entering in STOP
+ * @param Stdby Reset event when entering Standby mode.
+ * This parameter can be one of the following values:
+ * @arg OB_STDBY_NO_RST: No reset generated when entering in STANDBY
+ * @arg OB_STDBY_RST: Reset generated when entering in STANDBY
+ * @param Iwdgstop Independent watchdog counter freeze in Stop mode.
+ * This parameter can be one of the following values:
+ * @arg OB_IWDG_STOP_FREEZE: Freeze IWDG counter in STOP
+ * @arg OB_IWDG_STOP_ACTIVE: IWDG counter active in STOP
+ * @param Iwdgstdby Independent watchdog counter freeze in standby mode.
+ * This parameter can be one of the following values:
+ * @arg OB_IWDG_STDBY_FREEZE: Freeze IWDG counter in STANDBY
+ * @arg OB_IWDG_STDBY_ACTIVE: IWDG counter active in STANDBY
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint32_t Wwdg, uint32_t Iwdg, uint32_t Stop, uint32_t Stdby, uint32_t Iwdgstop, uint32_t Iwdgstdby)
+{
+ uint32_t useroptionmask = 0x00;
+ uint32_t useroptionvalue = 0x00;
+
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_WWDG_SOURCE(Wwdg));
+ assert_param(IS_OB_IWDG_SOURCE(Iwdg));
+ assert_param(IS_OB_STOP_SOURCE(Stop));
+ assert_param(IS_OB_STDBY_SOURCE(Stdby));
+ assert_param(IS_OB_IWDG_STOP_FREEZE(Iwdgstop));
+ assert_param(IS_OB_IWDG_STDBY_FREEZE(Iwdgstdby));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ useroptionmask = (FLASH_OPTCR_WWDG_SW | FLASH_OPTCR_IWDG_SW | FLASH_OPTCR_nRST_STOP | \
+ FLASH_OPTCR_nRST_STDBY | FLASH_OPTCR_IWDG_STOP | FLASH_OPTCR_IWDG_STDBY);
+
+ useroptionvalue = (Iwdg | Wwdg | Stop | Stdby | Iwdgstop | Iwdgstdby);
+
+ /* Update User Option Byte */
+ MODIFY_REG(FLASH->OPTCR, useroptionmask, useroptionvalue);
+ }
+
+ return status;
+
+}
+
+/**
+ * @brief Return the FLASH User Option Byte value.
+ * @retval uint32_t FLASH User Option Bytes values: WWDG_SW(Bit4), IWDG_SW(Bit5), nRST_STOP(Bit6),
+ * nRST_STDBY(Bit7), IWDG_STDBY(Bit30) and IWDG_STOP(Bit31).
+ */
+static uint32_t FLASH_OB_GetUser(void)
+{
+ /* Return the User Option Byte */
+ return ((uint32_t)(FLASH->OPTCR & 0xC00000F0U));
+}
+#endif /* FLASH_OPTCR_nDBANK */
+
+/**
+ * @brief Enable the write protection of the desired bank1 or bank2 sectors
+ *
+ * @note When the memory read protection level is selected (RDP level = 1),
+ * it is not possible to program or erase the flash sector i if CortexM7
+ * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
+ *
+ * @param WRPSector specifies the sector(s) to be write protected.
+ * This parameter can be one of the following values:
+ * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_7 (for STM32F74xxx/STM32F75xxx devices)
+ * or a value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_11 (in Single Bank mode for STM32F76xxx/STM32F77xxx devices)
+ * or a value between OB_WRP_DB_SECTOR_0 and OB_WRP_DB_SECTOR_23 (in Dual Bank mode for STM32F76xxx/STM32F77xxx devices)
+ * @arg OB_WRP_SECTOR_All
+ *
+ * @retval HAL FLASH State
+ */
+static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_WRP_SECTOR(WRPSector));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /*Write protection enabled on sectors */
+ FLASH->OPTCR &= (~WRPSector);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Disable the write protection of the desired bank1 or bank 2 sectors
+ *
+ * @note When the memory read protection level is selected (RDP level = 1),
+ * it is not possible to program or erase the flash sector i if CortexM4
+ * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
+ *
+ * @param WRPSector specifies the sector(s) to be write protected.
+ * This parameter can be one of the following values:
+ * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_7 (for STM32F74xxx/STM32F75xxx devices)
+ * or a value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_11 (in Single Bank mode for STM32F76xxx/STM32F77xxx devices)
+ * or a value between OB_WRP_DB_SECTOR_0 and OB_WRP_DB_SECTOR_23 (in Dual Bank mode for STM32F76xxx/STM32F77xxx devices)
+ * @arg OB_WRP_Sector_All
+ *
+ *
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_WRP_SECTOR(WRPSector));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Write protection disabled on sectors */
+ FLASH->OPTCR |= (WRPSector);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Set the read protection level.
+ * @param Level specifies the read protection level.
+ * This parameter can be one of the following values:
+ * @arg OB_RDP_LEVEL_0: No protection
+ * @arg OB_RDP_LEVEL_1: Read protection of the memory
+ * @arg OB_RDP_LEVEL_2: Full chip protection
+ *
+ * @note WARNING: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0
+ *
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_RDP_LEVEL(Level));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ *(__IO uint8_t*)OPTCR_BYTE1_ADDRESS = Level;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Set the BOR Level.
+ * @param Level specifies the Option Bytes BOR Reset Level.
+ * This parameter can be one of the following values:
+ * @arg OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V
+ * @arg OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V
+ * @arg OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V
+ * @arg OB_BOR_OFF: Supply voltage ranges from 1.62 to 2.1 V
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level)
+{
+ /* Check the parameters */
+ assert_param(IS_OB_BOR_LEVEL(Level));
+
+ /* Set the BOR Level */
+ MODIFY_REG(FLASH->OPTCR, FLASH_OPTCR_BOR_LEV, Level);
+
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Configure Boot base address.
+ *
+ * @param BootOption specifies Boot base address depending from Boot pin = 0 or pin = 1
+ * This parameter can be one of the following values:
+ * @arg OPTIONBYTE_BOOTADDR_0 : Boot address based when Boot pin = 0
+ * @arg OPTIONBYTE_BOOTADDR_1 : Boot address based when Boot pin = 1
+ * @param Address specifies Boot base address
+ * This parameter can be one of the following values:
+ * @arg OB_BOOTADDR_ITCM_RAM : Boot from ITCM RAM (0x00000000)
+ * @arg OB_BOOTADDR_SYSTEM : Boot from System memory bootloader (0x00100000)
+ * @arg OB_BOOTADDR_ITCM_FLASH : Boot from Flash on ITCM interface (0x00200000)
+ * @arg OB_BOOTADDR_AXIM_FLASH : Boot from Flash on AXIM interface (0x08000000)
+ * @arg OB_BOOTADDR_DTCM_RAM : Boot from DTCM RAM (0x20000000)
+ * @arg OB_BOOTADDR_SRAM1 : Boot from SRAM1 (0x20010000)
+ * @arg OB_BOOTADDR_SRAM2 : Boot from SRAM2 (0x2004C000)
+ *
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_BootAddressConfig(uint32_t BootOption, uint32_t Address)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_BOOT_ADDRESS(Address));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ if(BootOption == OPTIONBYTE_BOOTADDR_0)
+ {
+ MODIFY_REG(FLASH->OPTCR1, FLASH_OPTCR1_BOOT_ADD0, Address);
+ }
+ else
+ {
+ MODIFY_REG(FLASH->OPTCR1, FLASH_OPTCR1_BOOT_ADD1, (Address << 16));
+ }
+ }
+
+ return status;
+}
+
+/**
+ * @brief Returns the FLASH Read Protection level.
+ * @retval FlagStatus FLASH ReadOut Protection Status:
+ * This parameter can be one of the following values:
+ * @arg OB_RDP_LEVEL_0: No protection
+ * @arg OB_RDP_LEVEL_1: Read protection of the memory
+ * @arg OB_RDP_LEVEL_2: Full chip protection
+ */
+static uint8_t FLASH_OB_GetRDP(void)
+{
+ uint8_t readstatus = OB_RDP_LEVEL_0;
+
+ if ((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS)) == OB_RDP_LEVEL_0)
+ {
+ readstatus = OB_RDP_LEVEL_0;
+ }
+ else if ((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS)) == OB_RDP_LEVEL_2)
+ {
+ readstatus = OB_RDP_LEVEL_2;
+ }
+ else
+ {
+ readstatus = OB_RDP_LEVEL_1;
+ }
+
+ return readstatus;
+}
+
+/**
+ * @brief Returns the FLASH BOR level.
+ * @retval uint32_t The FLASH BOR level:
+ * - OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V
+ * - OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V
+ * - OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V
+ * - OB_BOR_OFF : Supply voltage ranges from 1.62 to 2.1 V
+ */
+static uint32_t FLASH_OB_GetBOR(void)
+{
+ /* Return the FLASH BOR level */
+ return ((uint32_t)(FLASH->OPTCR & 0x0C));
+}
+
+/**
+ * @brief Configure Boot base address.
+ *
+ * @param BootOption specifies Boot base address depending from Boot pin = 0 or pin = 1
+ * This parameter can be one of the following values:
+ * @arg OPTIONBYTE_BOOTADDR_0 : Boot address based when Boot pin = 0
+ * @arg OPTIONBYTE_BOOTADDR_1 : Boot address based when Boot pin = 1
+ *
+ * @retval uint32_t Boot Base Address:
+ * - OB_BOOTADDR_ITCM_RAM : Boot from ITCM RAM (0x00000000)
+ * - OB_BOOTADDR_SYSTEM : Boot from System memory bootloader (0x00100000)
+ * - OB_BOOTADDR_ITCM_FLASH : Boot from Flash on ITCM interface (0x00200000)
+ * - OB_BOOTADDR_AXIM_FLASH : Boot from Flash on AXIM interface (0x08000000)
+ * - OB_BOOTADDR_DTCM_RAM : Boot from DTCM RAM (0x20000000)
+ * - OB_BOOTADDR_SRAM1 : Boot from SRAM1 (0x20010000)
+ * - OB_BOOTADDR_SRAM2 : Boot from SRAM2 (0x2004C000)
+ */
+static uint32_t FLASH_OB_GetBootAddress(uint32_t BootOption)
+{
+ uint32_t Address = 0;
+
+ /* Return the Boot base Address */
+ if(BootOption == OPTIONBYTE_BOOTADDR_0)
+ {
+ Address = FLASH->OPTCR1 & FLASH_OPTCR1_BOOT_ADD0;
+ }
+ else
+ {
+ Address = ((FLASH->OPTCR1 & FLASH_OPTCR1_BOOT_ADD1) >> 16);
+ }
+
+ return Address;
+}
+
+#if defined (FLASH_OPTCR2_PCROP)
+/**
+ * @brief Set the PCROP protection for sectors.
+ * @param PCROPSector specifies the sector(s) to be PCROP protected.
+ * This parameter can be one of the following values:
+ * @arg OB_PCROP_SECTOR_x: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_7
+ * @arg OB_PCROP_SECTOR_ALL
+ *
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_PCROP_Config(uint32_t PCROPSector)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_PCROP_SECTOR(PCROPSector));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ MODIFY_REG(FLASH->OPTCR2, FLASH_OPTCR2_PCROP, PCROPSector);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Set the PCROP_RDP value
+ * @param Pcrop_Rdp specifies the PCROP_RDP bit value.
+ *
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_PCROP_RDP_Config(uint32_t Pcrop_Rdp)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_PCROP_RDP_VALUE(Pcrop_Rdp));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ MODIFY_REG(FLASH->OPTCR2, FLASH_OPTCR2_PCROP_RDP, Pcrop_Rdp);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Return the FLASH PCROP Protection Option Bytes value.
+ * @retval uint32_t FLASH PCROP Protection Option Bytes value
+ */
+static uint32_t FLASH_OB_GetPCROP(void)
+{
+ /* Return the FLASH write protection Register value */
+ return ((uint32_t)(FLASH->OPTCR2 & FLASH_OPTCR2_PCROP));
+}
+
+/**
+ * @brief Return the FLASH PCROP_RDP option byte value.
+ * @retval uint32_t FLASH PCROP_RDP option byte value
+ */
+static uint32_t FLASH_OB_GetPCROPRDP(void)
+{
+ /* Return the FLASH write protection Register value */
+ return ((uint32_t)(FLASH->OPTCR2 & FLASH_OPTCR2_PCROP_RDP));
+}
+#endif /* FLASH_OPTCR2_PCROP */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c
new file mode 100644
index 00000000..0650fd86
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c
@@ -0,0 +1,541 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_gpio.c
+ * @author MCD Application Team
+ * @brief GPIO HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the General Purpose Input/Output (GPIO) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### GPIO Peripheral features #####
+ ==============================================================================
+ [..]
+ Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each
+ port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software
+ in several modes:
+ (+) Input mode
+ (+) Analog mode
+ (+) Output mode
+ (+) Alternate function mode
+ (+) External interrupt/event lines
+
+ [..]
+ During and just after reset, the alternate functions and external interrupt
+ lines are not active and the I/O ports are configured in input floating mode.
+
+ [..]
+ All GPIO pins have weak internal pull-up and pull-down resistors, which can be
+ activated or not.
+
+ [..]
+ In Output or Alternate mode, each IO can be configured on open-drain or push-pull
+ type and the IO speed can be selected depending on the VDD value.
+
+ [..]
+ All ports have external interrupt/event capability. To use external interrupt
+ lines, the port must be configured in input mode. All available GPIO pins are
+ connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
+
+ [..]
+ The external interrupt/event controller consists of up to 23 edge detectors
+ (16 lines are connected to GPIO) for generating event/interrupt requests (each
+ input line can be independently configured to select the type (interrupt or event)
+ and the corresponding trigger event (rising or falling or both). Each line can
+ also be masked independently.
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE().
+
+ (#) Configure the GPIO pin(s) using HAL_GPIO_Init().
+ (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
+ (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef
+ structure.
+ (++) In case of Output or alternate function mode selection: the speed is
+ configured through "Speed" member from GPIO_InitTypeDef structure.
+ (++) In alternate mode is selection, the alternate function connected to the IO
+ is configured through "Alternate" member from GPIO_InitTypeDef structure.
+ (++) Analog mode is required when a pin is to be used as ADC channel
+ or DAC output.
+ (++) In case of external interrupt/event selection the "Mode" member from
+ GPIO_InitTypeDef structure select the type (interrupt or event) and
+ the corresponding trigger event (rising or falling or both).
+
+ (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority
+ mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
+ HAL_NVIC_EnableIRQ().
+
+ (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
+
+ (#) To set/reset the level of a pin configured in output mode use
+ HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
+
+ (#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
+
+
+ (#) During and just after reset, the alternate functions are not
+ active and the GPIO pins are configured in input floating mode (except JTAG
+ pins).
+
+ (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose
+ (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has
+ priority over the GPIO function.
+
+ (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as
+ general purpose PH0 and PH1, respectively, when the HSE oscillator is off.
+ The HSE has priority over the GPIO function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup GPIO GPIO
+ * @brief GPIO HAL module driver
+ * @{
+ */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup GPIO_Private_Constants GPIO Private Constants
+ * @{
+ */
+#define GPIO_MODE ((uint32_t)0x00000003U)
+#define EXTI_MODE ((uint32_t)0x10000000U)
+#define GPIO_MODE_IT ((uint32_t)0x00010000U)
+#define GPIO_MODE_EVT ((uint32_t)0x00020000U)
+#define RISING_EDGE ((uint32_t)0x00100000U)
+#define FALLING_EDGE ((uint32_t)0x00200000U)
+#define GPIO_OUTPUT_TYPE ((uint32_t)0x00000010U)
+
+#define GPIO_NUMBER ((uint32_t)16U)
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+
+/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ This section provides functions allowing to initialize and de-initialize the GPIOs
+ to be ready for use.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init.
+ * @param GPIOx where x can be (A..K) to select the GPIO peripheral.
+ * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains
+ * the configuration information for the specified GPIO peripheral.
+ * @retval None
+ */
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init)
+{
+ uint32_t position = 0x00;
+ uint32_t ioposition = 0x00;
+ uint32_t iocurrent = 0x00;
+ uint32_t temp = 0x00;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
+ assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
+ assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
+
+ /* Configure the port pins */
+ for(position = 0; position < GPIO_NUMBER; position++)
+ {
+ /* Get the IO position */
+ ioposition = ((uint32_t)0x01) << position;
+ /* Get the current IO position */
+ iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition;
+
+ if(iocurrent == ioposition)
+ {
+ /*--------------------- GPIO Mode Configuration ------------------------*/
+ /* In case of Alternate function mode selection */
+ if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ {
+ /* Check the Alternate function parameter */
+ assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
+
+ /* Configure Alternate function mapped with the current IO */
+ temp = GPIOx->AFR[position >> 3];
+ temp &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ;
+ temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & (uint32_t)0x07) * 4));
+ GPIOx->AFR[position >> 3] = temp;
+ }
+
+ /* Configure IO Direction mode (Input, Output, Alternate or Analog) */
+ temp = GPIOx->MODER;
+ temp &= ~(GPIO_MODER_MODER0 << (position * 2));
+ temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2));
+ GPIOx->MODER = temp;
+
+ /* In case of Output or Alternate function mode selection */
+ if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
+ (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ {
+ /* Check the Speed parameter */
+ assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
+ /* Configure the IO Speed */
+ temp = GPIOx->OSPEEDR;
+ temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2));
+ temp |= (GPIO_Init->Speed << (position * 2));
+ GPIOx->OSPEEDR = temp;
+
+ /* Configure the IO Output Type */
+ temp = GPIOx->OTYPER;
+ temp &= ~(GPIO_OTYPER_OT_0 << position) ;
+ temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4) << position);
+ GPIOx->OTYPER = temp;
+ }
+
+ /* Activate the Pull-up or Pull down resistor for the current IO */
+ temp = GPIOx->PUPDR;
+ temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2));
+ temp |= ((GPIO_Init->Pull) << (position * 2));
+ GPIOx->PUPDR = temp;
+
+ /*--------------------- EXTI Mode Configuration ------------------------*/
+ /* Configure the External Interrupt or event for the current IO */
+ if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
+ {
+ /* Enable SYSCFG Clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ temp = SYSCFG->EXTICR[position >> 2];
+ temp &= ~(((uint32_t)0x0F) << (4 * (position & 0x03)));
+ temp |= ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4 * (position & 0x03)));
+ SYSCFG->EXTICR[position >> 2] = temp;
+
+ /* Clear EXTI line configuration */
+ temp = EXTI->IMR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->IMR = temp;
+
+ temp = EXTI->EMR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->EMR = temp;
+
+ /* Clear Rising Falling edge configuration */
+ temp = EXTI->RTSR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->RTSR = temp;
+
+ temp = EXTI->FTSR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->FTSR = temp;
+ }
+ }
+ }
+}
+
+/**
+ * @brief De-initializes the GPIOx peripheral registers to their default reset values.
+ * @param GPIOx where x can be (A..K) to select the GPIO peripheral.
+ * @param GPIO_Pin specifies the port bit to be written.
+ * This parameter can be one of GPIO_PIN_x where x can be (0..15).
+ * @retval None
+ */
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin)
+{
+ uint32_t position;
+ uint32_t ioposition = 0x00;
+ uint32_t iocurrent = 0x00;
+ uint32_t tmp = 0x00;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+
+ /* Configure the port pins */
+ for(position = 0; position < GPIO_NUMBER; position++)
+ {
+ /* Get the IO position */
+ ioposition = ((uint32_t)0x01) << position;
+ /* Get the current IO position */
+ iocurrent = (GPIO_Pin) & ioposition;
+
+ if(iocurrent == ioposition)
+ {
+ /*------------------------- GPIO Mode Configuration --------------------*/
+ /* Configure IO Direction in Input Floating Mode */
+ GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2));
+
+ /* Configure the default Alternate Function in current IO */
+ GPIOx->AFR[position >> 3] &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ;
+
+ /* Configure the default value for IO Speed */
+ GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2));
+
+ /* Configure the default value IO Output Type */
+ GPIOx->OTYPER &= ~(GPIO_OTYPER_OT_0 << position) ;
+
+ /* Deactivate the Pull-up and Pull-down resistor for the current IO */
+ GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2));
+
+ /*------------------------- EXTI Mode Configuration --------------------*/
+ tmp = SYSCFG->EXTICR[position >> 2];
+ tmp &= (((uint32_t)0x0F) << (4 * (position & 0x03)));
+ if(tmp == ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4 * (position & 0x03))))
+ {
+ /* Configure the External Interrupt or event for the current IO */
+ tmp = ((uint32_t)0x0F) << (4 * (position & 0x03));
+ SYSCFG->EXTICR[position >> 2] &= ~tmp;
+
+ /* Clear EXTI line configuration */
+ EXTI->IMR &= ~((uint32_t)iocurrent);
+ EXTI->EMR &= ~((uint32_t)iocurrent);
+
+ /* Clear Rising Falling edge configuration */
+ EXTI->RTSR &= ~((uint32_t)iocurrent);
+ EXTI->FTSR &= ~((uint32_t)iocurrent);
+ }
+ }
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions
+ * @brief GPIO Read and Write
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Reads the specified input port pin.
+ * @param GPIOx where x can be (A..K) to select the GPIO peripheral.
+ * @param GPIO_Pin specifies the port bit to read.
+ * This parameter can be GPIO_PIN_x where x can be (0..15).
+ * @retval The input port pin value.
+ */
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ GPIO_PinState bitstatus;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ if((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET)
+ {
+ bitstatus = GPIO_PIN_SET;
+ }
+ else
+ {
+ bitstatus = GPIO_PIN_RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Sets or clears the selected data port bit.
+ *
+ * @note This function uses GPIOx_BSRR register to allow atomic read/modify
+ * accesses. In this way, there is no risk of an IRQ occurring between
+ * the read and the modify access.
+ *
+ * @param GPIOx where x can be (A..K) to select the GPIO peripheral.
+ * @param GPIO_Pin specifies the port bit to be written.
+ * This parameter can be one of GPIO_PIN_x where x can be (0..15).
+ * @param PinState specifies the value to be written to the selected bit.
+ * This parameter can be one of the GPIO_PinState enum values:
+ * @arg GPIO_PIN_RESET: to clear the port pin
+ * @arg GPIO_PIN_SET: to set the port pin
+ * @retval None
+ */
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+ assert_param(IS_GPIO_PIN_ACTION(PinState));
+
+ if(PinState != GPIO_PIN_RESET)
+ {
+ GPIOx->BSRR = GPIO_Pin;
+ }
+ else
+ {
+ GPIOx->BSRR = (uint32_t)GPIO_Pin << 16;
+ }
+}
+
+/**
+ * @brief Toggles the specified GPIO pins.
+ * @param GPIOx Where x can be (A..I) to select the GPIO peripheral.
+ * @param GPIO_Pin Specifies the pins to be toggled.
+ * @retval None
+ */
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ GPIOx->ODR ^= GPIO_Pin;
+}
+
+/**
+ * @brief Locks GPIO Pins configuration registers.
+ * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
+ * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
+ * @note The configuration of the locked GPIO pins can no longer be modified
+ * until the next reset.
+ * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F7 family
+ * @param GPIO_Pin specifies the port bit to be locked.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15).
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ __IO uint32_t tmp = GPIO_LCKR_LCKK;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ /* Apply lock key write sequence */
+ tmp |= GPIO_Pin;
+ /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+ GPIOx->LCKR = tmp;
+ /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */
+ GPIOx->LCKR = GPIO_Pin;
+ /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+ GPIOx->LCKR = tmp;
+ /* Read LCKK bit*/
+ tmp = GPIOx->LCKR;
+
+ if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET)
+ {
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief This function handles EXTI interrupt request.
+ * @param GPIO_Pin Specifies the pins connected EXTI line
+ * @retval None
+ */
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
+{
+ /* EXTI line interrupt detected */
+ if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET)
+ {
+ __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin);
+ HAL_GPIO_EXTI_Callback(GPIO_Pin);
+ }
+}
+
+/**
+ * @brief EXTI line detection callbacks.
+ * @param GPIO_Pin Specifies the pins connected EXTI line
+ * @retval None
+ */
+__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(GPIO_Pin);
+
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_GPIO_EXTI_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+#endif /* HAL_GPIO_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c
new file mode 100644
index 00000000..15e7e6e8
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c
@@ -0,0 +1,4874 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_i2c.c
+ * @author MCD Application Team
+ * @brief I2C HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Inter Integrated Circuit (I2C) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State and Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The I2C HAL driver can be used as follows:
+
+ (#) Declare a I2C_HandleTypeDef handle structure, for example:
+ I2C_HandleTypeDef hi2c;
+
+ (#)Initialize the I2C low level resources by implementing the HAL_I2C_MspInit() API:
+ (##) Enable the I2Cx interface clock
+ (##) I2C pins configuration
+ (+++) Enable the clock for the I2C GPIOs
+ (+++) Configure I2C pins as alternate function open-drain
+ (##) NVIC configuration if you need to use interrupt process
+ (+++) Configure the I2Cx interrupt priority
+ (+++) Enable the NVIC I2C IRQ Channel
+ (##) DMA Configuration if you need to use DMA process
+ (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream
+ (+++) Enable the DMAx interface clock using
+ (+++) Configure the DMA handle parameters
+ (+++) Configure the DMA Tx or Rx stream
+ (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on
+ the DMA Tx or Rx stream
+
+ (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode,
+ Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure.
+
+ (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware
+ (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API.
+
+ (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady()
+
+ (#) For I2C IO and IO MEM operations, three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit()
+ (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive()
+ (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit()
+ (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive()
+
+ *** Polling mode IO MEM operation ***
+ =====================================
+ [..]
+ (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write()
+ (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read()
+
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Transmit in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Transmit_IT()
+ (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback()
+ (+) Receive in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Receive_IT()
+ (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback()
+ (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Transmit_IT()
+ (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback()
+ (+) Receive in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Receive_IT()
+ (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback()
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+ (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT()
+ (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_AbortCpltCallback()
+ (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro.
+ This action will inform Master to generate a Stop condition to discard the communication.
+
+
+ *** Interrupt mode IO sequential operation ***
+ ==============================================
+ [..]
+ (@) These interfaces allow to manage a sequential transfer with a repeated start condition
+ when a direction change during transfer
+ [..]
+ (+) A specific option field manage the different steps of a sequential transfer
+ (+) Option field values are defined through @ref I2C_XFEROPTIONS and are listed below:
+ (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functionnal is same as associated interfaces in no sequential mode
+ (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address
+ and data to transfer without a final stop condition
+ (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with start condition, address
+ and data to transfer without a final stop condition, an then permit a call the same master sequential interface
+ several times (like HAL_I2C_Master_Sequential_Transmit_IT() then HAL_I2C_Master_Sequential_Transmit_IT())
+ (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address
+ and with new data to transfer if the direction change or manage only the new data to transfer
+ if no direction change and without a final stop condition in both cases
+ (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address
+ and with new data to transfer if the direction change or manage only the new data to transfer
+ if no direction change and with a final stop condition in both cases
+ (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition after several call of the same master sequential
+ interface several times (link with option I2C_FIRST_AND_NEXT_FRAME).
+ Usage can, transfer several bytes one by one using HAL_I2C_Master_Sequential_Transmit_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME)
+ or HAL_I2C_Master_Sequential_Receive_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME).
+ Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or Receive sequence permit to call the oposite interface Receive or Transmit
+ without stopping the communication and so generate a restart condition.
+
+ (+) Differents sequential I2C interfaces are listed below:
+ (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Sequential_Transmit_IT()
+ (+++) At transmission end of current frame transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback()
+ (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Sequential_Receive_IT()
+ (+++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback()
+ (++) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT()
+ (+++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_AbortCpltCallback()
+ (++) Enable/disable the Address listen mode in slave I2C mode using HAL_I2C_EnableListen_IT() HAL_I2C_DisableListen_IT()
+ (+++) When address slave I2C match, HAL_I2C_AddrCallback() is executed and user can
+ add his own code to check the Address Match Code and the transmission direction request by master (Write/Read).
+ (+++) At Listen mode end HAL_I2C_ListenCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ListenCpltCallback()
+ (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Sequential_Transmit_IT()
+ (+++) At transmission end of current frame transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback()
+ (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Sequential_Receive_IT()
+ (+++) At reception end of current frame transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback()
+ (++) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+ (++) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT()
+ (++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_AbortCpltCallback()
+ (++) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro.
+ This action will inform Master to generate a Stop condition to discard the communication.
+
+ *** Interrupt mode IO MEM operation ***
+ =======================================
+ [..]
+ (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using
+ HAL_I2C_Mem_Write_IT()
+ (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback()
+ (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using
+ HAL_I2C_Mem_Read_IT()
+ (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback()
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using
+ HAL_I2C_Master_Transmit_DMA()
+ (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback()
+ (+) Receive in master mode an amount of data in non-blocking mode (DMA) using
+ HAL_I2C_Master_Receive_DMA()
+ (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback()
+ (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using
+ HAL_I2C_Slave_Transmit_DMA()
+ (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback()
+ (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using
+ HAL_I2C_Slave_Receive_DMA()
+ (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback()
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+ (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT()
+ (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_AbortCpltCallback()
+ (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro.
+ This action will inform Master to generate a Stop condition to discard the communication.
+
+ *** DMA mode IO MEM operation ***
+ =================================
+ [..]
+ (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using
+ HAL_I2C_Mem_Write_DMA()
+ (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback()
+ (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using
+ HAL_I2C_Mem_Read_DMA()
+ (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback()
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+
+
+ *** I2C HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in I2C HAL driver.
+
+ (+) __HAL_I2C_ENABLE: Enable the I2C peripheral
+ (+) __HAL_I2C_DISABLE: Disable the I2C peripheral
+ (+) __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode
+ (+) __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not
+ (+) __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag
+ (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt
+ (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt
+
+ [..]
+ (@) You can refer to the I2C HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup I2C I2C
+ * @brief I2C HAL module driver
+ * @{
+ */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup I2C_Private_Define I2C Private Define
+ * @{
+ */
+#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */
+#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */
+#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */
+
+#define MAX_NBYTE_SIZE 255U
+#define SlaveAddr_SHIFT 7U
+#define SlaveAddr_MSK 0x06U
+
+/* Private define for @ref PreviousState usage */
+#define I2C_STATE_MSK ((uint32_t)((HAL_I2C_STATE_BUSY_TX | HAL_I2C_STATE_BUSY_RX) & (~((uint32_t)HAL_I2C_STATE_READY)))) /*!< Mask State define, keep only RX and TX bits */
+#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) /*!< Default Value */
+#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)((HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | HAL_I2C_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)((HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | HAL_I2C_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)((HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | HAL_I2C_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)((HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | HAL_I2C_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MEM_BUSY_TX ((uint32_t)((HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | HAL_I2C_MODE_MEM)) /*!< Memory Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MEM_BUSY_RX ((uint32_t)((HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | HAL_I2C_MODE_MEM)) /*!< Memory Busy RX, combinaison of State LSB and Mode enum */
+
+
+/* Private define to centralize the enable/disable of Interrupts */
+#define I2C_XFER_TX_IT (0x00000001U)
+#define I2C_XFER_RX_IT (0x00000002U)
+#define I2C_XFER_LISTEN_IT (0x00000004U)
+
+#define I2C_XFER_ERROR_IT (0x00000011U)
+#define I2C_XFER_CPLT_IT (0x00000012U)
+#define I2C_XFER_RELOAD_IT (0x00000012U)
+
+/* Private define Sequential Transfer Options default/reset value */
+#define I2C_NO_OPTION_FRAME (0xFFFF0000U)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+#define I2C_GET_DMA_REMAIN_DATA(__HANDLE__) ((((__HANDLE__)->State) == HAL_I2C_STATE_BUSY_TX) ? \
+ ((uint32_t)(((DMA_Stream_TypeDef *)(__HANDLE__)->hdmatx->Instance)->NDTR)) : \
+ ((uint32_t)(((DMA_Stream_TypeDef *)(__HANDLE__)->hdmarx->Instance)->NDTR)))
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/** @defgroup I2C_Private_Functions I2C Private Functions
+ * @{
+ */
+/* Private functions to handle DMA transfer */
+static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAError(DMA_HandleTypeDef *hdma);
+static void I2C_DMAAbort(DMA_HandleTypeDef *hdma);
+
+/* Private functions to handle IT transfer */
+static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITMasterSequentialCplt(I2C_HandleTypeDef *hi2c);
+static void I2C_ITSlaveSequentialCplt(I2C_HandleTypeDef *hi2c);
+static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode);
+
+/* Private functions to handle IT transfer */
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
+
+/* Private functions for I2C transfer IRQ handler */
+static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+
+/* Private functions to handle flags during polling transfer */
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+
+/* Private functions to centralize the enable/disable of Interrupts */
+static HAL_StatusTypeDef I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest);
+static HAL_StatusTypeDef I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest);
+
+/* Private functions to flush TXDR register */
+static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c);
+
+/* Private functions to handle start, restart or stop a transfer */
+static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Functions I2C Exported Functions
+ * @{
+ */
+
+/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ deinitialize the I2Cx peripheral:
+
+ (+) User must Implement HAL_I2C_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+ (+) Call the function HAL_I2C_Init() to configure the selected device with
+ the selected configuration:
+ (++) Clock Timing
+ (++) Own Address 1
+ (++) Addressing mode (Master, Slave)
+ (++) Dual Addressing mode
+ (++) Own Address 2
+ (++) Own Address 2 Mask
+ (++) General call mode
+ (++) Nostretch mode
+
+ (+) Call the function HAL_I2C_DeInit() to restore the default configuration
+ of the selected I2Cx peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the I2C according to the specified parameters
+ * in the I2C_InitTypeDef and initialize the associated handle.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c)
+{
+ /* Check the I2C handle allocation */
+ if (hi2c == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1));
+ assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode));
+ assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode));
+ assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2));
+ assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks));
+ assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode));
+ assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode));
+
+ if (hi2c->State == HAL_I2C_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hi2c->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+ HAL_I2C_MspInit(hi2c);
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /*---------------------------- I2Cx TIMINGR Configuration ------------------*/
+ /* Configure I2Cx: Frequency range */
+ hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK;
+
+ /*---------------------------- I2Cx OAR1 Configuration ---------------------*/
+ /* Disable Own Address1 before set the Own Address1 configuration */
+ hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN;
+
+ /* Configure I2Cx: Own Address1 and ack own address1 mode */
+ if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
+ {
+ hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1);
+ }
+ else /* I2C_ADDRESSINGMODE_10BIT */
+ {
+ hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1);
+ }
+
+ /*---------------------------- I2Cx CR2 Configuration ----------------------*/
+ /* Configure I2Cx: Addressing Master mode */
+ if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+ {
+ hi2c->Instance->CR2 = (I2C_CR2_ADD10);
+ }
+ /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */
+ hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK);
+
+ /*---------------------------- I2Cx OAR2 Configuration ---------------------*/
+ /* Disable Own Address2 before set the Own Address2 configuration */
+ hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE;
+
+ /* Configure I2Cx: Dual mode and Own Address2 */
+ hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | (hi2c->Init.OwnAddress2Masks << 8));
+
+ /*---------------------------- I2Cx CR1 Configuration ----------------------*/
+ /* Configure I2Cx: Generalcall and NoStretch mode */
+ hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode);
+
+ /* Enable the selected I2C peripheral */
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitialize the I2C peripheral.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c)
+{
+ /* Check the I2C handle allocation */
+ if (hi2c == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the I2C Peripheral Clock */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_I2C_MspDeInit(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->State = HAL_I2C_STATE_RESET;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the I2C MSP.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitialize the I2C MSP.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the I2C data
+ transfers.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode : The communication is performed in the polling mode.
+ The status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode : The communication is performed using Interrupts
+ or DMA. These functions return the status of the transfer startup.
+ The end of the data processing will be indicated through the
+ dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+
+ (#) Blocking mode functions are :
+ (++) HAL_I2C_Master_Transmit()
+ (++) HAL_I2C_Master_Receive()
+ (++) HAL_I2C_Slave_Transmit()
+ (++) HAL_I2C_Slave_Receive()
+ (++) HAL_I2C_Mem_Write()
+ (++) HAL_I2C_Mem_Read()
+ (++) HAL_I2C_IsDeviceReady()
+
+ (#) No-Blocking mode functions with Interrupt are :
+ (++) HAL_I2C_Master_Transmit_IT()
+ (++) HAL_I2C_Master_Receive_IT()
+ (++) HAL_I2C_Slave_Transmit_IT()
+ (++) HAL_I2C_Slave_Receive_IT()
+ (++) HAL_I2C_Mem_Write_IT()
+ (++) HAL_I2C_Mem_Read_IT()
+
+ (#) No-Blocking mode functions with DMA are :
+ (++) HAL_I2C_Master_Transmit_DMA()
+ (++) HAL_I2C_Master_Receive_DMA()
+ (++) HAL_I2C_Slave_Transmit_DMA()
+ (++) HAL_I2C_Slave_Receive_DMA()
+ (++) HAL_I2C_Mem_Write_DMA()
+ (++) HAL_I2C_Mem_Read_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_I2C_MemTxCpltCallback()
+ (++) HAL_I2C_MemRxCpltCallback()
+ (++) HAL_I2C_MasterTxCpltCallback()
+ (++) HAL_I2C_MasterRxCpltCallback()
+ (++) HAL_I2C_SlaveTxCpltCallback()
+ (++) HAL_I2C_SlaveRxCpltCallback()
+ (++) HAL_I2C_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmits in master mode an amount of data in blocking mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+ }
+
+ while (hi2c->XferCount > 0U)
+ {
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ hi2c->XferSize--;
+
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+ }
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives in master mode an amount of data in blocking mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+ }
+
+ while (hi2c->XferCount > 0U)
+ {
+ /* Wait until RXNE flag is set */
+ if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+ }
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmits in slave mode an amount of data in blocking mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Wait until ADDR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* If 10bit addressing mode is selected */
+ if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+ {
+ /* Wait until ADDR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+ }
+
+ /* Wait until DIR flag is set Transmitter mode */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ while (hi2c->XferCount > 0U)
+ {
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ }
+
+ /* Wait until STOP flag is set */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Normal use case for Transmitter mode */
+ /* A NACK is generated to confirm the end of transfer */
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Wait until BUSY flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in blocking mode
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Wait until ADDR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* Wait until DIR flag is reset Receiver mode */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ while (hi2c->XferCount > 0U)
+ {
+ /* Wait until RXNE flag is set */
+ if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ /* Store Last receive data if any */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET)
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferCount--;
+ }
+
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferCount--;
+ }
+
+ /* Wait until STOP flag is set */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Wait until BUSY flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in master mode an amount of data in non-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_DMA;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ if (hi2c->XferSize > 0U)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA stream */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+ }
+ else
+ {
+ /* Update Transfer ISR function pointer */
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and generate START condition */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in master mode an amount of data in non-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_DMA;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ if (hi2c->XferSize > 0U)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA stream */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+ }
+ else
+ {
+ /* Update Transfer ISR function pointer */
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ /* Send Slave Address */
+ /* Set NBYTES to read and generate START condition */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Slave_ISR_DMA;
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA stream */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, STOP, NACK, ADDR interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in non-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Slave_ISR_DMA;
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA stream */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, STOP, NACK, ADDR interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in blocking mode to a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+
+ do
+ {
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ hi2c->XferSize--;
+
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+
+ }
+ while (hi2c->XferCount > 0U);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Read an amount of data in blocking mode from a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+ }
+
+ do
+ {
+ /* Wait until RXNE flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+ }
+ while (hi2c->XferCount > 0U);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_NO_STARTSTOP);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_DMA;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA stream */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_NO_STARTSTOP);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be read
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_DMA;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA stream */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Checks if target device is ready for communication.
+ * @note This function is used with Memory devices
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param Trials Number of trials
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ __IO uint32_t I2C_Trials = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ do
+ {
+ /* Generate Start */
+ hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set or a NACK flag is set*/
+ tickstart = HAL_GetTick();
+ while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) && (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) && (hi2c->State != HAL_I2C_STATE_TIMEOUT))
+ {
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ /* Device is ready */
+ hi2c->State = HAL_I2C_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Check if the NACKF flag has not been set */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET)
+ {
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Device is ready */
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Clear STOP Flag, auto generated with autoend*/
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+ }
+
+ /* Check if the maximum allowed number of trials has been reached */
+ if (I2C_Trials++ == Trials)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR2 |= I2C_CR2_STOP;
+
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+ }
+ }
+ while (I2C_Trials < Trials);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt.
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ uint32_t xfermode = 0U;
+ uint32_t xferrequest = I2C_GENERATE_START_WRITE;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = XferOptions;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ /* If size > MAX_NBYTE_SIZE, use reload mode */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = hi2c->XferOptions;
+ }
+
+ /* If transfer direction not change, do not generate Restart Condition */
+ /* Mean Previous state is same as current state */
+ if (hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX)
+ {
+ xferrequest = I2C_NO_STARTSTOP;
+ }
+
+ /* Send Slave Address and set NBYTES to write */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, xferrequest);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ uint32_t xfermode = 0U;
+ uint32_t xferrequest = I2C_GENERATE_START_READ;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = XferOptions;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = hi2c->XferOptions;
+ }
+
+ /* If transfer direction not change, do not generate Restart Condition */
+ /* Mean Previous state is same as current state */
+ if (hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX)
+ {
+ xferrequest = I2C_NO_STARTSTOP;
+ }
+
+ /* Send Slave Address and set NBYTES to read */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, xferrequest);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) == HAL_I2C_STATE_LISTEN)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Disable Interrupts, to prevent preemption during treatment in case of multicall */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */
+ /* and then toggle the HAL slave RX state to TX state */
+ if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN)
+ {
+ /* Disable associated Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = XferOptions;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE)
+ {
+ /* Clear ADDR flag after prepare the transfer parameters */
+ /* This action will generate an acknowledge to the Master */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* REnable ADDR interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) == HAL_I2C_STATE_LISTEN)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Disable Interrupts, to prevent preemption during treatment in case of multicall */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */
+ /* and then toggle the HAL slave TX state to RX state */
+ if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN)
+ {
+ /* Disable associated Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = XferOptions;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT)
+ {
+ /* Clear ADDR flag after prepare the transfer parameters */
+ /* This action will generate an acknowledge to the Master */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* REnable ADDR interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Enable the Address listen mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ /* Enable the Address Match interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Disable the Address listen mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of tmp to prevent undefined behavior of volatile usage */
+ uint32_t tmp;
+
+ /* Disable Address listen mode only if a transfer is not ongoing */
+ if (hi2c->State == HAL_I2C_STATE_LISTEN)
+ {
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->XferISR = NULL;
+
+ /* Disable the Address Match interrupt */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Abort a master I2C IT or DMA process communication with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress)
+{
+ if (hi2c->Mode == HAL_I2C_MODE_MASTER)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ /* Set State at HAL_I2C_STATE_ABORT */
+ hi2c->State = HAL_I2C_STATE_ABORT;
+
+ /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */
+ /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */
+ I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Wrong usage of abort function */
+ /* This function should be used only in case of abort monitored by master device */
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
+
+/**
+ * @brief This function handles I2C event interrupt request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+ /* Get current IT Flags and IT sources value */
+ uint32_t itflags = READ_REG(hi2c->Instance->ISR);
+ uint32_t itsources = READ_REG(hi2c->Instance->CR1);
+
+ /* I2C events treatment -------------------------------------*/
+ if (hi2c->XferISR != NULL)
+ {
+ hi2c->XferISR(hi2c, itflags, itsources);
+ }
+}
+
+/**
+ * @brief This function handles I2C error interrupt request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+ uint32_t itflags = READ_REG(hi2c->Instance->ISR);
+ uint32_t itsources = READ_REG(hi2c->Instance->CR1);
+
+ /* I2C Bus error interrupt occurred ------------------------------------*/
+ if (((itflags & I2C_FLAG_BERR) != RESET) && ((itsources & I2C_IT_ERRI) != RESET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_BERR;
+
+ /* Clear BERR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR);
+ }
+
+ /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/
+ if (((itflags & I2C_FLAG_OVR) != RESET) && ((itsources & I2C_IT_ERRI) != RESET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_OVR;
+
+ /* Clear OVR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR);
+ }
+
+ /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/
+ if (((itflags & I2C_FLAG_ARLO) != RESET) && ((itsources & I2C_IT_ERRI) != RESET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO;
+
+ /* Clear ARLO flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO);
+ }
+
+ /* Call the Error Callback in case of Error detected */
+ if ((hi2c->ErrorCode & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE)
+ {
+ I2C_ITError(hi2c, hi2c->ErrorCode);
+ }
+}
+
+/**
+ * @brief Master Tx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MasterTxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Master Rx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MasterRxCpltCallback could be implemented in the user file
+ */
+}
+
+/** @brief Slave Tx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Slave Rx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Slave Address Match callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION
+ * @param AddrMatchCode Address Match Code
+ * @retval None
+ */
+__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ UNUSED(TransferDirection);
+ UNUSED(AddrMatchCode);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_AddrCallback() could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Listen Complete callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_ListenCpltCallback() could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Memory Tx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MemTxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Memory Rx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MemRxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2C error callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2C abort callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_AbortCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
+ * @brief Peripheral State, Mode and Error functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State, Mode and Error functions #####
+ ===============================================================================
+ [..]
+ This subsection permit to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the I2C handle state.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL state
+ */
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c)
+{
+ /* Return I2C handle state */
+ return hi2c->State;
+}
+
+/**
+ * @brief Returns the I2C Master, Slave, Memory or no mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL mode
+ */
+HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c)
+{
+ return hi2c->Mode;
+}
+
+/**
+ * @brief Return the I2C error code.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+* @retval I2C Error Code
+*/
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c)
+{
+ return hi2c->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ uint16_t devaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ if (((ITFlags & I2C_FLAG_AF) != RESET) && ((ITSources & I2C_IT_NACKI) != RESET))
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set corresponding Error Code */
+ /* No need to generate STOP, it is automatically done */
+ /* Error callback will be send during stop flag treatment */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+ }
+ else if (((ITFlags & I2C_FLAG_RXNE) != RESET) && ((ITSources & I2C_IT_RXI) != RESET))
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+ }
+ else if (((ITFlags & I2C_FLAG_TXIS) != RESET) && ((ITSources & I2C_IT_TXI) != RESET))
+ {
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+ }
+ else if (((ITFlags & I2C_FLAG_TCR) != RESET) && ((ITSources & I2C_IT_TCI) != RESET))
+ {
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ devaddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, devaddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ if (hi2c->XferOptions != I2C_NO_OPTION_FRAME)
+ {
+ I2C_TransferConfig(hi2c, devaddress, hi2c->XferSize, hi2c->XferOptions, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c, devaddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+ }
+ else
+ {
+ /* Call TxCpltCallback() if no stop mode is set */
+ if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE)
+ {
+ /* Call I2C Master Sequential complete process */
+ I2C_ITMasterSequentialCplt(hi2c);
+ }
+ else
+ {
+ /* Wrong size Status regarding TCR flag event */
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
+ }
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_TC) != RESET) && ((ITSources & I2C_IT_TCI) != RESET))
+ {
+ if (hi2c->XferCount == 0U)
+ {
+ if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE)
+ {
+ /* Generate a stop condition in case of no transfer option */
+ if (hi2c->XferOptions == I2C_NO_OPTION_FRAME)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR2 |= I2C_CR2_STOP;
+ }
+ else
+ {
+ /* Call I2C Master Sequential complete process */
+ I2C_ITMasterSequentialCplt(hi2c);
+ }
+ }
+ }
+ else
+ {
+ /* Wrong size Status regarding TC flag event */
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
+ }
+ }
+
+ if (((ITFlags & I2C_FLAG_STOPF) != RESET) && ((ITSources & I2C_IT_STOPI) != RESET))
+ {
+ /* Call I2C Master complete process */
+ I2C_ITMasterCplt(hi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ /* Process locked */
+ __HAL_LOCK(hi2c);
+
+ if (((ITFlags & I2C_FLAG_AF) != RESET) && ((ITSources & I2C_IT_NACKI) != RESET))
+ {
+ /* Check that I2C transfer finished */
+ /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */
+ /* Mean XferCount == 0*/
+ /* So clear Flag NACKF only */
+ if (hi2c->XferCount == 0U)
+ {
+ if (((hi2c->XferOptions == I2C_FIRST_AND_LAST_FRAME) || (hi2c->XferOptions == I2C_LAST_FRAME)) && \
+ (hi2c->State == HAL_I2C_STATE_LISTEN))
+ {
+ /* Call I2C Listen complete process */
+ I2C_ITListenCplt(hi2c, ITFlags);
+ }
+ else if ((hi2c->XferOptions != I2C_NO_OPTION_FRAME) && (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN))
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+
+ /* Last Byte is Transmitted */
+ /* Call I2C Slave Sequential complete process */
+ I2C_ITSlaveSequentialCplt(hi2c);
+ }
+ else
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+ }
+ }
+ else
+ {
+ /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_RXNE) != RESET) && ((ITSources & I2C_IT_RXI) != RESET))
+ {
+ if (hi2c->XferCount > 0U)
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+ }
+
+ if ((hi2c->XferCount == 0U) && \
+ (hi2c->XferOptions != I2C_NO_OPTION_FRAME))
+ {
+ /* Call I2C Slave Sequential complete process */
+ I2C_ITSlaveSequentialCplt(hi2c);
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_ADDR) != RESET) && ((ITSources & I2C_IT_ADDRI) != RESET))
+ {
+ I2C_ITAddrCplt(hi2c, ITFlags);
+ }
+ else if (((ITFlags & I2C_FLAG_TXIS) != RESET) && ((ITSources & I2C_IT_TXI) != RESET))
+ {
+ /* Write data to TXDR only if XferCount not reach "0" */
+ /* A TXIS flag can be set, during STOP treatment */
+ /* Check if all Datas have already been sent */
+ /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */
+ if (hi2c->XferCount > 0U)
+ {
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ hi2c->XferSize--;
+ }
+ else
+ {
+ if ((hi2c->XferOptions == I2C_NEXT_FRAME) || (hi2c->XferOptions == I2C_FIRST_FRAME))
+ {
+ /* Last Byte is Transmitted */
+ /* Call I2C Slave Sequential complete process */
+ I2C_ITSlaveSequentialCplt(hi2c);
+ }
+ }
+ }
+
+ /* Check if STOPF is set */
+ if (((ITFlags & I2C_FLAG_STOPF) != RESET) && ((ITSources & I2C_IT_STOPI) != RESET))
+ {
+ /* Call I2C Slave complete process */
+ I2C_ITSlaveCplt(hi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ uint16_t devaddress = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ if (((ITFlags & I2C_FLAG_AF) != RESET) && ((ITSources & I2C_IT_NACKI) != RESET))
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set corresponding Error Code */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+
+ /* No need to generate STOP, it is automatically done */
+ /* But enable STOP interrupt, to treat it */
+ /* Error callback will be send during stop flag treatment */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+ }
+ else if (((ITFlags & I2C_FLAG_TCR) != RESET) && ((ITSources & I2C_IT_TCI) != RESET))
+ {
+ /* Disable TC interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI);
+
+ if (hi2c->XferCount != 0U)
+ {
+ /* Recover Slave address */
+ devaddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+
+ /* Prepare the new XferSize to transfer */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Set the new XferSize in Nbytes register */
+ I2C_TransferConfig(hi2c, devaddress, hi2c->XferSize, xfermode, I2C_NO_STARTSTOP);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Enable DMA Request */
+ if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
+ {
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+ }
+ else
+ {
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+ }
+ }
+ else
+ {
+ /* Wrong size Status regarding TCR flag event */
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_STOPF) != RESET) && ((ITSources & I2C_IT_STOPI) != RESET))
+ {
+ /* Call I2C Master complete process */
+ I2C_ITMasterCplt(hi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ /* Process locked */
+ __HAL_LOCK(hi2c);
+
+ if (((ITFlags & I2C_FLAG_AF) != RESET) && ((ITSources & I2C_IT_NACKI) != RESET))
+ {
+ /* Check that I2C transfer finished */
+ /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */
+ /* Mean XferCount == 0 */
+ /* So clear Flag NACKF only */
+ if (I2C_GET_DMA_REMAIN_DATA(hi2c) == 0U)
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+ }
+ else
+ {
+ /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_ADDR) != RESET) && ((ITSources & I2C_IT_ADDRI) != RESET))
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+ }
+ else if (((ITFlags & I2C_FLAG_STOPF) != RESET) && ((ITSources & I2C_IT_STOPI) != RESET))
+ {
+ /* Call I2C Slave complete process */
+ I2C_ITSlaveCplt(hi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address followed by internal memory address for write request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+{
+ I2C_TransferConfig(hi2c, DevAddress, MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
+
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* If Memory address size is 8Bit */
+ if (MemAddSize == I2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+ /* If Memory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress);
+
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send LSB of Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address followed by internal memory address for read request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+{
+ I2C_TransferConfig(hi2c, DevAddress, MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE);
+
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* If Memory address size is 8Bit */
+ if (MemAddSize == I2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+ /* If Memory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress);
+
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send LSB of Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+
+ /* Wait until TC flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief I2C Address complete process callback.
+ * @param hi2c I2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+ uint8_t transferdirection = 0U;
+ uint16_t slaveaddrcode = 0U;
+ uint16_t ownadd1code = 0U;
+ uint16_t ownadd2code = 0U;
+
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(ITFlags);
+
+ /* In case of Listen state, need to inform upper layer of address match code event */
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) == HAL_I2C_STATE_LISTEN)
+ {
+ transferdirection = I2C_GET_DIR(hi2c);
+ slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c);
+ ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c);
+ ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c);
+
+ /* If 10bits addressing mode is selected */
+ if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+ {
+ if ((slaveaddrcode & SlaveAddr_MSK) == ((ownadd1code >> SlaveAddr_SHIFT) & SlaveAddr_MSK))
+ {
+ slaveaddrcode = ownadd1code;
+ hi2c->AddrEventCount++;
+ if (hi2c->AddrEventCount == 2U)
+ {
+ /* Reset Address Event counter */
+ hi2c->AddrEventCount = 0U;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call Slave Addr callback */
+ HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode);
+ }
+ }
+ else
+ {
+ slaveaddrcode = ownadd2code;
+
+ /* Disable ADDR Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call Slave Addr callback */
+ HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode);
+ }
+ }
+ /* else 7 bits addressing mode is selected */
+ else
+ {
+ /* Disable ADDR Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call Slave Addr callback */
+ HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode);
+ }
+ }
+ /* Else clear address flag only */
+ else
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Master sequential complete process.
+ * @param hi2c I2C handle.
+ * @retval None
+ */
+static void I2C_ITMasterSequentialCplt(I2C_HandleTypeDef *hi2c)
+{
+ /* Reset I2C handle mode */
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* No Generate Stop, to permit restart mode */
+ /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */
+ if (hi2c->State == HAL_I2C_STATE_BUSY_TX)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX;
+ hi2c->XferISR = NULL;
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_MasterTxCpltCallback(hi2c);
+ }
+ /* hi2c->State == HAL_I2C_STATE_BUSY_RX */
+ else
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX;
+ hi2c->XferISR = NULL;
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_MasterRxCpltCallback(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Slave sequential complete process.
+ * @param hi2c I2C handle.
+ * @retval None
+ */
+static void I2C_ITSlaveSequentialCplt(I2C_HandleTypeDef *hi2c)
+{
+ /* Reset I2C handle mode */
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN)
+ {
+ /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX;
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Tx complete callback to inform upper layer of the end of transmit process */
+ HAL_I2C_SlaveTxCpltCallback(hi2c);
+ }
+
+ else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN)
+ {
+ /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX;
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Rx complete callback to inform upper layer of the end of receive process */
+ HAL_I2C_SlaveRxCpltCallback(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Master complete process.
+ * @param hi2c I2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ /* Reset handle parameters */
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->XferISR = NULL;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ if ((ITFlags & I2C_FLAG_AF) != RESET)
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set acknowledge error code */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_RX_IT);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ if ((hi2c->ErrorCode != HAL_I2C_ERROR_NONE) || (hi2c->State == HAL_I2C_STATE_ABORT))
+ {
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, hi2c->ErrorCode);
+ }
+ /* hi2c->State == HAL_I2C_STATE_BUSY_TX */
+ else if (hi2c->State == HAL_I2C_STATE_BUSY_TX)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ if (hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_MemTxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_MasterTxCpltCallback(hi2c);
+ }
+ }
+ /* hi2c->State == HAL_I2C_STATE_BUSY_RX */
+ else if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ if (hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ HAL_I2C_MemRxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ HAL_I2C_MasterRxCpltCallback(hi2c);
+ }
+ }
+}
+
+/**
+ * @brief I2C Slave complete process.
+ * @param hi2c I2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* Disable all interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT | I2C_XFER_RX_IT);
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+
+ /* If a DMA is ongoing, Update handle size context */
+ if (((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) ||
+ ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN))
+ {
+ hi2c->XferCount = I2C_GET_DMA_REMAIN_DATA(hi2c);
+ }
+
+ /* All data are not transferred, so set error code accordingly */
+ if (hi2c->XferCount != 0U)
+ {
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+
+ /* Store Last receive data if any */
+ if (((ITFlags & I2C_FLAG_RXNE) != RESET))
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+
+ if ((hi2c->XferSize > 0U))
+ {
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ }
+
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->XferISR = NULL;
+
+ if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, hi2c->ErrorCode);
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ if (hi2c->State == HAL_I2C_STATE_LISTEN)
+ {
+ /* Call I2C Listen complete process */
+ I2C_ITListenCplt(hi2c, ITFlags);
+ }
+ }
+ else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME)
+ {
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ HAL_I2C_ListenCpltCallback(hi2c);
+ }
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ else if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Slave Rx Complete callback */
+ HAL_I2C_SlaveRxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Slave Tx Complete callback */
+ HAL_I2C_SlaveTxCpltCallback(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Listen complete process.
+ * @param hi2c I2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+ /* Reset handle parameters */
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->XferISR = NULL;
+
+ /* Store Last receive data if any */
+ if (((ITFlags & I2C_FLAG_RXNE) != RESET))
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+
+ if ((hi2c->XferSize > 0U))
+ {
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ }
+
+ /* Disable all Interrupts*/
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT);
+
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ HAL_I2C_ListenCpltCallback(hi2c);
+}
+
+/**
+ * @brief I2C interrupts error process.
+ * @param hi2c I2C handle.
+ * @param ErrorCode Error code to handle.
+ * @retval None
+ */
+static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode)
+{
+ /* Reset handle parameters */
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferCount = 0U;
+
+ /* Set new error code */
+ hi2c->ErrorCode |= ErrorCode;
+
+ /* Disable Interrupts */
+ if ((hi2c->State == HAL_I2C_STATE_LISTEN) ||
+ (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) ||
+ (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN))
+ {
+ /* Disable all interrupts, except interrupts related to LISTEN state */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT);
+
+ /* keep HAL_I2C_STATE_LISTEN if set */
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+ }
+ else
+ {
+ /* Disable all interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT);
+
+ /* If state is an abort treatment on goind, don't change state */
+ /* This change will be do later */
+ if (hi2c->State != HAL_I2C_STATE_ABORT)
+ {
+ /* Set HAL_I2C_STATE_READY */
+ hi2c->State = HAL_I2C_STATE_READY;
+ }
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->XferISR = NULL;
+ }
+
+ /* Abort DMA TX transfer if any */
+ if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN)
+ {
+ hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+
+ /* Set the I2C DMA Abort callback :
+ will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+ hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Abort DMA TX */
+ if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK)
+ {
+ /* Call Directly XferAbortCallback function in case of error */
+ hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx);
+ }
+ }
+ /* Abort DMA RX transfer if any */
+ else if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN)
+ {
+ hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+
+ /* Set the I2C DMA Abort callback :
+ will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+ hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Abort DMA RX */
+ if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK)
+ {
+ /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */
+ hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx);
+ }
+ }
+ else if (hi2c->State == HAL_I2C_STATE_ABORT)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_AbortCpltCallback(hi2c);
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Tx data register flush process.
+ * @param hi2c I2C handle.
+ * @retval None
+ */
+static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c)
+{
+ /* If a pending TXIS flag is set */
+ /* Write a dummy data in TXDR to clear it */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET)
+ {
+ hi2c->Instance->TXDR = 0x00U;
+ }
+
+ /* Flush TX register if not empty */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET)
+ {
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE);
+ }
+}
+
+/**
+ * @brief DMA I2C master transmit process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+
+ /* If last transfer, enable STOP interrupt */
+ if (hi2c->XferCount == 0U)
+ {
+ /* Enable STOP interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+ }
+ /* else prepare a new DMA transfer and enable TCReload interrupt */
+ else
+ {
+ /* Update Buffer pointer */
+ hi2c->pBuffPtr += hi2c->XferSize;
+
+ /* Set the XferSize to transfer */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ }
+
+ /* Enable the DMA stream */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Enable TC interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT);
+ }
+}
+
+/**
+ * @brief DMA I2C slave transmit process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+
+ /* No specific action, Master fully manage the generation of STOP condition */
+ /* Mean that this generation can arrive at any time, at the end or during DMA process */
+ /* So STOP condition should be manage through Interrupt treatment */
+}
+
+/**
+ * @brief DMA I2C master receive process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+
+ /* If last transfer, enable STOP interrupt */
+ if (hi2c->XferCount == 0U)
+ {
+ /* Enable STOP interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+ }
+ /* else prepare a new DMA transfer and enable TCReload interrupt */
+ else
+ {
+ /* Update Buffer pointer */
+ hi2c->pBuffPtr += hi2c->XferSize;
+
+ /* Set the XferSize to transfer */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ }
+
+ /* Enable the DMA stream */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize);
+
+ /* Enable TC interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT);
+ }
+}
+
+/**
+ * @brief DMA I2C slave receive process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+
+ /* No specific action, Master fully manage the generation of STOP condition */
+ /* Mean that this generation can arrive at any time, at the end or during DMA process */
+ /* So STOP condition should be manage through Interrupt treatment */
+}
+
+/**
+ * @brief DMA I2C communication error callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMAError(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, HAL_I2C_ERROR_DMA);
+}
+
+/**
+ * @brief DMA I2C communication abort callback
+ * (To be called at end of DMA Abort procedure).
+ * @param hdma DMA handle.
+ * @retval None
+ */
+static void I2C_DMAAbort(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ /* Reset AbortCpltCallback */
+ hi2c->hdmatx->XferAbortCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Check if come from abort from user */
+ if (hi2c->State == HAL_I2C_STATE_ABORT)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_AbortCpltCallback(hi2c);
+ }
+ else
+ {
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Flag Specifies the I2C flag to check.
+ * @param Status The new Flag status (SET or RESET).
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart)
+{
+ while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status)
+ {
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of STOP flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check if a STOPF is detected */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET)
+ {
+ /* Check if an RXNE is pending */
+ /* Store Last receive data if any */
+ if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) && (hi2c->XferSize > 0U))
+ {
+ /* Return HAL_OK */
+ /* The Reading of data from RXDR will be done in caller function */
+ return HAL_OK;
+ }
+ else
+ {
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
+ }
+
+ /* Check for the Timeout */
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles Acknowledge failed detection during an I2C Communication.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
+ {
+ /* Wait until STOP Flag is reset */
+ /* AutoEnd should be initiate after AF */
+ while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
+ {
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear NACKF Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_AF;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set).
+ * @param hi2c I2C handle.
+ * @param DevAddress Specifies the slave address to be programmed.
+ * @param Size Specifies the number of bytes to be programmed.
+ * This parameter must be a value between 0 and 255.
+ * @param Mode New state of the I2C START condition generation.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_RELOAD_MODE Enable Reload mode .
+ * @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode.
+ * @arg @ref I2C_SOFTEND_MODE Enable Software end mode.
+ * @param Request New state of the I2C START condition generation.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition.
+ * @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0).
+ * @arg @ref I2C_GENERATE_START_READ Generate Restart for read request.
+ * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request.
+ * @retval None
+ */
+static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_TRANSFER_MODE(Mode));
+ assert_param(IS_TRANSFER_REQUEST(Request));
+
+ /* update CR2 register */
+ MODIFY_REG(hi2c->Instance->CR2, ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | I2C_CR2_START | I2C_CR2_STOP)), \
+ (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | (uint32_t)Mode | (uint32_t)Request));
+}
+
+/**
+ * @brief Manage the enabling of Interrupts.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest)
+{
+ uint32_t tmpisr = 0U;
+
+ if ((hi2c->XferISR == I2C_Master_ISR_DMA) || \
+ (hi2c->XferISR == I2C_Slave_ISR_DMA))
+ {
+ if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
+ {
+ /* Enable ERR, STOP, NACK and ADDR interrupts */
+ tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_ERROR_IT) == I2C_XFER_ERROR_IT)
+ {
+ /* Enable ERR and NACK interrupts */
+ tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_CPLT_IT) == I2C_XFER_CPLT_IT)
+ {
+ /* Enable STOP interrupts */
+ tmpisr |= I2C_IT_STOPI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_RELOAD_IT) == I2C_XFER_RELOAD_IT)
+ {
+ /* Enable TC interrupts */
+ tmpisr |= I2C_IT_TCI;
+ }
+ }
+ else
+ {
+ if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
+ {
+ /* Enable ERR, STOP, NACK, and ADDR interrupts */
+ tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT)
+ {
+ /* Enable ERR, TC, STOP, NACK and RXI interrupts */
+ tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT)
+ {
+ /* Enable ERR, TC, STOP, NACK and TXI interrupts */
+ tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_CPLT_IT) == I2C_XFER_CPLT_IT)
+ {
+ /* Enable STOP interrupts */
+ tmpisr |= I2C_IT_STOPI;
+ }
+ }
+
+ /* Enable interrupts only at the end */
+ /* to avoid the risk of I2C interrupt handle execution before */
+ /* all interrupts requested done */
+ __HAL_I2C_ENABLE_IT(hi2c, tmpisr);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Manage the disabling of Interrupts.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest)
+{
+ uint32_t tmpisr = 0U;
+
+ if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT)
+ {
+ /* Disable TC and TXI interrupts */
+ tmpisr |= I2C_IT_TCI | I2C_IT_TXI;
+
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) != HAL_I2C_STATE_LISTEN)
+ {
+ /* Disable NACK and STOP interrupts */
+ tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+ }
+
+ if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT)
+ {
+ /* Disable TC and RXI interrupts */
+ tmpisr |= I2C_IT_TCI | I2C_IT_RXI;
+
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) != HAL_I2C_STATE_LISTEN)
+ {
+ /* Disable NACK and STOP interrupts */
+ tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+ }
+
+ if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
+ {
+ /* Disable ADDR, NACK and STOP interrupts */
+ tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_ERROR_IT) == I2C_XFER_ERROR_IT)
+ {
+ /* Enable ERR and NACK interrupts */
+ tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_CPLT_IT) == I2C_XFER_CPLT_IT)
+ {
+ /* Enable STOP interrupts */
+ tmpisr |= I2C_IT_STOPI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_RELOAD_IT) == I2C_XFER_RELOAD_IT)
+ {
+ /* Enable TC interrupts */
+ tmpisr |= I2C_IT_TCI;
+ }
+
+ /* Disable interrupts only at the end */
+ /* to avoid a breaking situation like at "t" time */
+ /* all disable interrupts request are not done */
+ __HAL_I2C_DISABLE_IT(hi2c, tmpisr);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c
new file mode 100644
index 00000000..f8f48aa9
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c
@@ -0,0 +1,274 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_i2c_ex.c
+ * @author MCD Application Team
+ * @brief I2C Extended HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of I2C Extended peripheral:
+ * + Extended features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### I2C peripheral Extended features #####
+ ==============================================================================
+
+ [..] Comparing to other previous devices, the I2C interface for STM32F7xx
+ devices contains the following additional features
+
+ (+) Possibility to disable or enable Analog Noise Filter
+ (+) Use of a configured Digital Noise Filter
+ (+) Disable or enable Fast Mode Plus
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..] This driver provides functions to:
+ (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter()
+ (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter()
+ (#) Configure the enable or disable of fast mode plus driving capability using the functions :
+ (++) HAL_I2CEx_EnableFastModePlus()
+ (++) HAL_I2CEx_DisableFastModePlus()
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup I2CEx I2CEx
+ * @brief I2C Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure Noise Filters
+ (+) Configure Fast Mode Plus
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure I2C Analog noise filter.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @param AnalogFilter New state of the Analog filter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Reset I2Cx ANOFF bit */
+ hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF);
+
+ /* Set analog filter bit*/
+ hi2c->Instance->CR1 |= AnalogFilter;
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Configure I2C Digital noise filter.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Get the old register value */
+ tmpreg = hi2c->Instance->CR1;
+
+ /* Reset I2Cx DNF bits [11:8] */
+ tmpreg &= ~(I2C_CR1_DNF);
+
+ /* Set I2Cx DNF coefficient */
+ tmpreg |= DigitalFilter << 8U;
+
+ /* Store the new register value */
+ hi2c->Instance->CR1 = tmpreg;
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+#if (defined(SYSCFG_PMC_I2C_PB6_FMP) || defined(SYSCFG_PMC_I2C_PB7_FMP)) || (defined(SYSCFG_PMC_I2C_PB8_FMP) || defined(SYSCFG_PMC_I2C_PB9_FMP)) || (defined(SYSCFG_PMC_I2C1_FMP)) || (defined(SYSCFG_PMC_I2C2_FMP)) || defined(SYSCFG_PMC_I2C3_FMP) || defined(SYSCFG_PMC_I2C4_FMP)
+/**
+ * @brief Enable the I2C fast mode plus driving capability.
+ * @param ConfigFastModePlus Selects the pin.
+ * This parameter can be one of the @ref I2CEx_FastModePlus values
+ * @note For I2C1, fast mode plus driving capability can be enabled on all selected
+ * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
+ * on each one of the following pins PB6, PB7, PB8 and PB9.
+ * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
+ * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
+ * @note For all I2C2 pins fast mode plus driving capability can be enabled
+ * only by using I2C_FASTMODEPLUS_I2C2 parameter.
+ * @note For all I2C3 pins fast mode plus driving capability can be enabled
+ * only by using I2C_FASTMODEPLUS_I2C3 parameter.
+ * @note For all I2C4 pins fast mode plus driving capability can be enabled
+ * only by using I2C_FASTMODEPLUS_I2C4 parameter.
+ * @retval None
+ */
+void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ /* Check the parameter */
+ assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
+
+ /* Enable SYSCFG clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Enable fast mode plus driving capability for selected pin */
+ SET_BIT(SYSCFG->PMC, (uint32_t)ConfigFastModePlus);
+}
+
+/**
+ * @brief Disable the I2C fast mode plus driving capability.
+ * @param ConfigFastModePlus Selects the pin.
+ * This parameter can be one of the @ref I2CEx_FastModePlus values
+ * @note For I2C1, fast mode plus driving capability can be disabled on all selected
+ * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
+ * on each one of the following pins PB6, PB7, PB8 and PB9.
+ * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
+ * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
+ * @note For all I2C2 pins fast mode plus driving capability can be disabled
+ * only by using I2C_FASTMODEPLUS_I2C2 parameter.
+ * @note For all I2C3 pins fast mode plus driving capability can be disabled
+ * only by using I2C_FASTMODEPLUS_I2C3 parameter.
+ * @note For all I2C4 pins fast mode plus driving capability can be disabled
+ * only by using I2C_FASTMODEPLUS_I2C4 parameter.
+ * @retval None
+ */
+void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ /* Check the parameter */
+ assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
+
+ /* Enable SYSCFG clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Disable fast mode plus driving capability for selected pin */
+ CLEAR_BIT(SYSCFG->PMC, (uint32_t)ConfigFastModePlus);
+}
+
+#endif
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c
new file mode 100644
index 00000000..17c4e923
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c
@@ -0,0 +1,615 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_pwr.c
+ * @author MCD Application Team
+ * @brief PWR HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Power Controller (PWR) peripheral:
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PWR PWR
+ * @brief PWR HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup PWR_Private_Constants
+ * @{
+ */
+
+/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask
+ * @{
+ */
+#define PVD_MODE_IT ((uint32_t)0x00010000U)
+#define PVD_MODE_EVT ((uint32_t)0x00020000U)
+#define PVD_RISING_EDGE ((uint32_t)0x00000001U)
+#define PVD_FALLING_EDGE ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_ENABLE_WUP_Mask PWR Enable WUP Mask
+ * @{
+ */
+#define PWR_EWUP_MASK ((uint32_t)0x00003F00)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ After reset, the backup domain (RTC registers, RTC backup data
+ registers and backup SRAM) is protected against possible unwanted
+ write accesses.
+ To enable access to the RTC Domain and RTC registers, proceed as follows:
+ (+) Enable the Power Controller (PWR) APB1 interface clock using the
+ __HAL_RCC_PWR_CLK_ENABLE() macro.
+ (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the HAL PWR peripheral registers to their default reset values.
+ * @retval None
+ */
+void HAL_PWR_DeInit(void)
+{
+ __HAL_RCC_PWR_FORCE_RESET();
+ __HAL_RCC_PWR_RELEASE_RESET();
+}
+
+/**
+ * @brief Enables access to the backup domain (RTC registers, RTC
+ * backup data registers and backup SRAM).
+ * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
+ * Backup Domain Access should be kept enabled.
+ * @retval None
+ */
+void HAL_PWR_EnableBkUpAccess(void)
+{
+ /* Enable access to RTC and backup registers */
+ SET_BIT(PWR->CR1, PWR_CR1_DBP);
+}
+
+/**
+ * @brief Disables access to the backup domain (RTC registers, RTC
+ * backup data registers and backup SRAM).
+ * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
+ * Backup Domain Access should be kept enabled.
+ * @retval None
+ */
+void HAL_PWR_DisableBkUpAccess(void)
+{
+ /* Disable access to RTC and backup registers */
+ CLEAR_BIT(PWR->CR1, PWR_CR1_DBP);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @brief Low Power modes configuration functions
+ *
+@verbatim
+
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+
+ *** PVD configuration ***
+ =========================
+ [..]
+ (+) The PVD is used to monitor the VDD power supply by comparing it to a
+ threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
+ (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
+ than the PVD threshold. This event is internally connected to the EXTI
+ line16 and can generate an interrupt if enabled. This is done through
+ __HAL_PWR_PVD_EXTI_ENABLE_IT() macro.
+ (+) The PVD is stopped in Standby mode.
+
+ *** Wake-up pin configuration ***
+ ================================
+ [..]
+ (+) Wake-up pin is used to wake up the system from Standby mode. This pin is
+ forced in input pull-down configuration and is active on rising edges.
+ (+) There are up to 6 Wake-up pin in the STM32F7 devices family
+
+ *** Low Power modes configuration ***
+ =====================================
+ [..]
+ The devices feature 3 low-power modes:
+ (+) Sleep mode: Cortex-M7 core stopped, peripherals kept running.
+ (+) Stop mode: all clocks are stopped, regulator running, regulator
+ in low power mode
+ (+) Standby mode: 1.2V domain powered off.
+
+ *** Sleep mode ***
+ ==================
+ [..]
+ (+) Entry:
+ The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI)
+ functions with
+ (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+ (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+
+ -@@- The Regulator parameter is not used for the STM32F7 family
+ and is kept as parameter just to maintain compatibility with the
+ lower power families (STM32L).
+ (+) Exit:
+ Any peripheral interrupt acknowledged by the nested vectored interrupt
+ controller (NVIC) can wake up the device from Sleep mode.
+
+ *** Stop mode ***
+ =================
+ [..]
+ In Stop mode, all clocks in the 1.2V domain are stopped, the PLL, the HSI,
+ and the HSE RC oscillators are disabled. Internal SRAM and register contents
+ are preserved.
+ The voltage regulator can be configured either in normal or low-power mode.
+ To minimize the consumption In Stop mode, FLASH can be powered off before
+ entering the Stop mode using the HAL_PWREx_EnableFlashPowerDown() function.
+ It can be switched on again by software after exiting the Stop mode using
+ the HAL_PWREx_DisableFlashPowerDown() function.
+
+ (+) Entry:
+ The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON)
+ function with:
+ (++) Main regulator ON.
+ (++) Low Power regulator ON.
+ (+) Exit:
+ Any EXTI Line (Internal or External) configured in Interrupt/Event mode.
+
+ *** Standby mode ***
+ ====================
+ [..]
+ (+)
+ The Standby mode allows to achieve the lowest power consumption. It is based
+ on the Cortex-M7 deep sleep mode, with the voltage regulator disabled.
+ The 1.2V domain is consequently powered off. The PLL, the HSI oscillator and
+ the HSE oscillator are also switched off. SRAM and register contents are lost
+ except for the RTC registers, RTC backup registers, backup SRAM and Standby
+ circuitry.
+
+ The voltage regulator is OFF.
+
+ (++) Entry:
+ (+++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function.
+ (++) Exit:
+ (+++) WKUP pin rising or falling edge, RTC alarm (Alarm A and Alarm B), RTC
+ wakeup, tamper event, time stamp event, external reset in NRST pin, IWDG reset.
+
+ *** Auto-wakeup (AWU) from low-power mode ***
+ =============================================
+ [..]
+
+ (+) The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC
+ Wakeup event, a tamper event or a time-stamp event, without depending on
+ an external interrupt (Auto-wakeup mode).
+
+ (+) RTC auto-wakeup (AWU) from the Stop and Standby modes
+
+ (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to
+ configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function.
+
+ (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it
+ is necessary to configure the RTC to detect the tamper or time stamp event using the
+ HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions.
+
+ (++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to
+ configure the RTC to generate the RTC WakeUp event using the HAL_RTCEx_SetWakeUpTimer_IT() function.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
+ * @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration
+ * information for the PVD.
+ * @note Refer to the electrical characteristics of your device datasheet for
+ * more details about the voltage threshold corresponding to each
+ * detection level.
+ * @retval None
+ */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
+ assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
+
+ /* Set PLS[7:5] bits according to PVDLevel value */
+ MODIFY_REG(PWR->CR1, PWR_CR1_PLS, sConfigPVD->PVDLevel);
+
+ /* Clear any previous config. Keep it clear if no event or IT mode is selected */
+ __HAL_PWR_PVD_EXTI_DISABLE_EVENT();
+ __HAL_PWR_PVD_EXTI_DISABLE_IT();
+ __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();
+ __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+ /* Configure interrupt mode */
+ if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_IT();
+ }
+
+ /* Configure event mode */
+ if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_EVENT();
+ }
+
+ /* Configure the edge */
+ if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
+ }
+
+ if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+ }
+}
+
+/**
+ * @brief Enables the Power Voltage Detector(PVD).
+ * @retval None
+ */
+void HAL_PWR_EnablePVD(void)
+{
+ /* Enable the power voltage detector */
+ SET_BIT(PWR->CR1, PWR_CR1_PVDE);
+}
+
+/**
+ * @brief Disables the Power Voltage Detector(PVD).
+ * @retval None
+ */
+void HAL_PWR_DisablePVD(void)
+{
+ /* Disable the power voltage detector */
+ CLEAR_BIT(PWR->CR1, PWR_CR1_PVDE);
+}
+
+/**
+ * @brief Enable the WakeUp PINx functionality.
+ * @param WakeUpPinPolarity Specifies which Wake-Up pin to enable.
+ * This parameter can be one of the following legacy values, which sets the default polarity:
+ * detection on high level (rising edge):
+ * @arg PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5, PWR_WAKEUP_PIN6
+ * or one of the following value where the user can explicitly states the enabled pin and
+ * the chosen polarity
+ * @arg PWR_WAKEUP_PIN1_HIGH or PWR_WAKEUP_PIN1_LOW
+ * @arg PWR_WAKEUP_PIN2_HIGH or PWR_WAKEUP_PIN2_LOW
+ * @arg PWR_WAKEUP_PIN3_HIGH or PWR_WAKEUP_PIN3_LOW
+ * @arg PWR_WAKEUP_PIN4_HIGH or PWR_WAKEUP_PIN4_LOW
+ * @arg PWR_WAKEUP_PIN5_HIGH or PWR_WAKEUP_PIN5_LOW
+ * @arg PWR_WAKEUP_PIN6_HIGH or PWR_WAKEUP_PIN6_LOW
+ * @note PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent.
+ * @retval None
+ */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity)
+{
+ assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity));
+
+ /* Enable wake-up pin */
+ SET_BIT(PWR->CSR2, (PWR_EWUP_MASK & WakeUpPinPolarity));
+
+ /* Specifies the Wake-Up pin polarity for the event detection
+ (rising or falling edge) */
+ MODIFY_REG(PWR->CR2, (PWR_EWUP_MASK & WakeUpPinPolarity), (WakeUpPinPolarity >> 0x06));
+}
+
+/**
+ * @brief Disables the WakeUp PINx functionality.
+ * @param WakeUpPinx Specifies the Power Wake-Up pin to disable.
+ * This parameter can be one of the following values:
+ * @arg PWR_WAKEUP_PIN1
+ * @arg PWR_WAKEUP_PIN2
+ * @arg PWR_WAKEUP_PIN3
+ * @arg PWR_WAKEUP_PIN4
+ * @arg PWR_WAKEUP_PIN5
+ * @arg PWR_WAKEUP_PIN6
+ * @retval None
+ */
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
+{
+ assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+
+ CLEAR_BIT(PWR->CSR2, WakeUpPinx);
+}
+
+/**
+ * @brief Enters Sleep mode.
+ *
+ * @note In Sleep mode, all I/O pins keep the same state as in Run mode.
+ *
+ * @note In Sleep mode, the systick is stopped to avoid exit from this mode with
+ * systick interrupt when used as time base for Timeout
+ *
+ * @param Regulator Specifies the regulator state in SLEEP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON
+ * @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON
+ * @note This parameter is not used for the STM32F7 family and is kept as parameter
+ * just to maintain compatibility with the lower power families.
+ * @param SLEEPEntry Specifies if SLEEP mode in entered with WFI or WFE instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+ * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+ * @retval None
+ */
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR(Regulator));
+ assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
+
+ /* Clear SLEEPDEEP bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+
+ /* Ensure that all instructions done before entering SLEEP mode */
+ __DSB();
+ __ISB();
+
+ /* Select SLEEP mode entry -------------------------------------------------*/
+ if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __SEV();
+ __WFE();
+ __WFE();
+ }
+}
+
+/**
+ * @brief Enters Stop mode.
+ * @note In Stop mode, all I/O pins keep the same state as in Run mode.
+ * @note When exiting Stop mode by issuing an interrupt or a wakeup event,
+ * the HSI RC oscillator is selected as system clock.
+ * @note When the voltage regulator operates in low power mode, an additional
+ * startup delay is incurred when waking up from Stop mode.
+ * By keeping the internal regulator ON during Stop mode, the consumption
+ * is higher although the startup time is reduced.
+ * @param Regulator Specifies the regulator state in Stop mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON
+ * @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON
+ * @param STOPEntry Specifies if Stop mode in entered with WFI or WFE instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction
+ * @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction
+ * @retval None
+ */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR(Regulator));
+ assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+
+ /* Select the regulator state in Stop mode ---------------------------------*/
+ tmpreg = PWR->CR1;
+ /* Clear PDDS and LPDS bits */
+ tmpreg &= (uint32_t)~(PWR_CR1_PDDS | PWR_CR1_LPDS);
+
+ /* Set LPDS, MRLVDS and LPLVDS bits according to Regulator value */
+ tmpreg |= Regulator;
+
+ /* Store the new value */
+ PWR->CR1 = tmpreg;
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+ /* Ensure that all instructions done before entering STOP mode */
+ __DSB();
+ __ISB();
+
+ /* Select Stop mode entry --------------------------------------------------*/
+ if(STOPEntry == PWR_STOPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __SEV();
+ __WFE();
+ __WFE();
+ }
+ /* Reset SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
+}
+
+/**
+ * @brief Enters Standby mode.
+ * @note In Standby mode, all I/O pins are high impedance except for:
+ * - Reset pad (still available)
+ * - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC
+ * Alarm out, or RTC clock calibration out.
+ * - RTC_AF2 pin (PI8) if configured for tamper or time-stamp.
+ * - WKUP pins if enabled.
+ * @retval None
+ */
+void HAL_PWR_EnterSTANDBYMode(void)
+{
+ /* Select Standby mode */
+ PWR->CR1 |= PWR_CR1_PDDS;
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+ /* This option is used to ensure that store operations are completed */
+#if defined ( __CC_ARM)
+ __force_stores();
+#endif
+ /* Request Wait For Interrupt */
+ __WFI();
+}
+
+/**
+ * @brief This function handles the PWR PVD interrupt request.
+ * @note This API should be called under the PVD_IRQHandler().
+ * @retval None
+ */
+void HAL_PWR_PVD_IRQHandler(void)
+{
+ /* Check PWR Exti flag */
+ if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
+ {
+ /* PWR PVD interrupt user callback */
+ HAL_PWR_PVDCallback();
+
+ /* Clear PWR Exti pending bit */
+ __HAL_PWR_PVD_EXTI_CLEAR_FLAG();
+ }
+}
+
+/**
+ * @brief PWR PVD interrupt callback
+ * @retval None
+ */
+__weak void HAL_PWR_PVDCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PWR_PVDCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode.
+ * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+ * re-enters SLEEP mode when an interruption handling is over.
+ * Setting this bit is useful when the processor is expected to run only on
+ * interruptions handling.
+ * @retval None
+ */
+void HAL_PWR_EnableSleepOnExit(void)
+{
+ /* Set SLEEPONEXIT bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+ * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode.
+ * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+ * re-enters SLEEP mode when an interruption handling is over.
+ * @retval None
+ */
+void HAL_PWR_DisableSleepOnExit(void)
+{
+ /* Clear SLEEPONEXIT bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+ * @brief Enables CORTEX M4 SEVONPEND bit.
+ * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes
+ * WFE to wake up when an interrupt moves from inactive to pended.
+ * @retval None
+ */
+void HAL_PWR_EnableSEVOnPend(void)
+{
+ /* Set SEVONPEND bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+ * @brief Disables CORTEX M4 SEVONPEND bit.
+ * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes
+ * WFE to wake up when an interrupt moves from inactive to pended.
+ * @retval None
+ */
+void HAL_PWR_DisableSEVOnPend(void)
+{
+ /* Clear SEVONPEND bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c
new file mode 100644
index 00000000..663fa1e7
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c
@@ -0,0 +1,570 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_pwr_ex.c
+ * @author MCD Application Team
+ * @brief Extended PWR HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of PWR extension peripheral:
+ * + Peripheral Extended features functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PWREx PWREx
+ * @brief PWR HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup PWREx_Private_Constants
+ * @{
+ */
+#define PWR_OVERDRIVE_TIMEOUT_VALUE 1000
+#define PWR_UDERDRIVE_TIMEOUT_VALUE 1000
+#define PWR_BKPREG_TIMEOUT_VALUE 1000
+#define PWR_VOSRDY_TIMEOUT_VALUE 1000
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Functions PWREx Exported Functions
+ * @{
+ */
+
+/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended features functions
+ * @brief Peripheral Extended features functions
+ *
+@verbatim
+
+ ===============================================================================
+ ##### Peripheral extended features functions #####
+ ===============================================================================
+
+ *** Main and Backup Regulators configuration ***
+ ================================================
+ [..]
+ (+) The backup domain includes 4 Kbytes of backup SRAM accessible only from
+ the CPU, and address in 32-bit, 16-bit or 8-bit mode. Its content is
+ retained even in Standby or VBAT mode when the low power backup regulator
+ is enabled. It can be considered as an internal EEPROM when VBAT is
+ always present. You can use the HAL_PWREx_EnableBkUpReg() function to
+ enable the low power backup regulator.
+
+ (+) When the backup domain is supplied by VDD (analog switch connected to VDD)
+ the backup SRAM is powered from VDD which replaces the VBAT power supply to
+ save battery life.
+
+ (+) The backup SRAM is not mass erased by a tamper event. It is read
+ protected to prevent confidential data, such as cryptographic private
+ key, from being accessed. The backup SRAM can be erased only through
+ the Flash interface when a protection level change from level 1 to
+ level 0 is requested.
+ -@- Refer to the description of Read protection (RDP) in the Flash
+ programming manual.
+
+ (+) The main internal regulator can be configured to have a tradeoff between
+ performance and power consumption when the device does not operate at
+ the maximum frequency. This is done through __HAL_PWR_MAINREGULATORMODE_CONFIG()
+ macro which configure VOS bit in PWR_CR register
+
+ Refer to the product datasheets for more details.
+
+ *** FLASH Power Down configuration ****
+ =======================================
+ [..]
+ (+) By setting the FPDS bit in the PWR_CR register by using the
+ HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters power
+ down mode when the device enters Stop mode. When the Flash memory
+ is in power down mode, an additional startup delay is incurred when
+ waking up from Stop mode.
+
+ *** Over-Drive and Under-Drive configuration ****
+ =================================================
+ [..]
+ (+) In Run mode: the main regulator has 2 operating modes available:
+ (++) Normal mode: The CPU and core logic operate at maximum frequency at a given
+ voltage scaling (scale 1, scale 2 or scale 3)
+ (++) Over-drive mode: This mode allows the CPU and the core logic to operate at a
+ higher frequency than the normal mode for a given voltage scaling (scale 1,
+ scale 2 or scale 3). This mode is enabled through HAL_PWREx_EnableOverDrive() function and
+ disabled by HAL_PWREx_DisableOverDrive() function, to enter or exit from Over-drive mode please follow
+ the sequence described in Reference manual.
+
+ (+) In Stop mode: the main regulator or low power regulator supplies a low power
+ voltage to the 1.2V domain, thus preserving the content of registers
+ and internal SRAM. 2 operating modes are available:
+ (++) Normal mode: the 1.2V domain is preserved in nominal leakage mode. This mode is only
+ available when the main regulator or the low power regulator is used in Scale 3 or
+ low voltage mode.
+ (++) Under-drive mode: the 1.2V domain is preserved in reduced leakage mode. This mode is only
+ available when the main regulator or the low power regulator is in low voltage mode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables the Backup Regulator.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void)
+{
+ uint32_t tickstart = 0;
+
+ /* Enable Backup regulator */
+ PWR->CSR1 |= PWR_CSR1_BRE;
+
+ /* Workaround for the following hardware bug: */
+ /* Id 19: PWR : No STANDBY wake-up when Back-up RAM enabled (ref. Errata Sheet p23) */
+ PWR->CSR1 |= PWR_CSR1_EIWUP;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till Backup regulator ready flag is set */
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables the Backup Regulator.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void)
+{
+ uint32_t tickstart = 0;
+
+ /* Disable Backup regulator */
+ PWR->CSR1 &= (uint32_t)~((uint32_t)PWR_CSR1_BRE);
+
+ /* Workaround for the following hardware bug: */
+ /* Id 19: PWR : No STANDBY wake-up when Back-up RAM enabled (ref. Errata Sheet p23) */
+ PWR->CSR1 |= PWR_CSR1_EIWUP;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till Backup regulator ready flag is set */
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the Flash Power Down in Stop mode.
+ * @retval None
+ */
+void HAL_PWREx_EnableFlashPowerDown(void)
+{
+ /* Enable the Flash Power Down */
+ PWR->CR1 |= PWR_CR1_FPDS;
+}
+
+/**
+ * @brief Disables the Flash Power Down in Stop mode.
+ * @retval None
+ */
+void HAL_PWREx_DisableFlashPowerDown(void)
+{
+ /* Disable the Flash Power Down */
+ PWR->CR1 &= (uint32_t)~((uint32_t)PWR_CR1_FPDS);
+}
+
+/**
+ * @brief Enables Main Regulator low voltage mode.
+ * @retval None
+ */
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void)
+{
+ /* Enable Main regulator low voltage */
+ PWR->CR1 |= PWR_CR1_MRUDS;
+}
+
+/**
+ * @brief Disables Main Regulator low voltage mode.
+ * @retval None
+ */
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void)
+{
+ /* Disable Main regulator low voltage */
+ PWR->CR1 &= (uint32_t)~((uint32_t)PWR_CR1_MRUDS);
+}
+
+/**
+ * @brief Enables Low Power Regulator low voltage mode.
+ * @retval None
+ */
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void)
+{
+ /* Enable low power regulator */
+ PWR->CR1 |= PWR_CR1_LPUDS;
+}
+
+/**
+ * @brief Disables Low Power Regulator low voltage mode.
+ * @retval None
+ */
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void)
+{
+ /* Disable low power regulator */
+ PWR->CR1 &= (uint32_t)~((uint32_t)PWR_CR1_LPUDS);
+}
+
+/**
+ * @brief Activates the Over-Drive mode.
+ * @note This mode allows the CPU and the core logic to operate at a higher frequency
+ * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).
+ * @note It is recommended to enter or exit Over-drive mode when the application is not running
+ * critical tasks and when the system clock source is either HSI or HSE.
+ * During the Over-drive switch activation, no peripheral clocks should be enabled.
+ * The peripheral clocks must be enabled once the Over-drive mode is activated.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void)
+{
+ uint32_t tickstart = 0;
+
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable the Over-drive to extend the clock frequency to 216 MHz */
+ __HAL_PWR_OVERDRIVE_ENABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Enable the Over-drive switch */
+ __HAL_PWR_OVERDRIVESWITCHING_ENABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivates the Over-Drive mode.
+ * @note This mode allows the CPU and the core logic to operate at a higher frequency
+ * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).
+ * @note It is recommended to enter or exit Over-drive mode when the application is not running
+ * critical tasks and when the system clock source is either HSI or HSE.
+ * During the Over-drive switch activation, no peripheral clocks should be enabled.
+ * The peripheral clocks must be enabled once the Over-drive mode is activated.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void)
+{
+ uint32_t tickstart = 0;
+
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Disable the Over-drive switch */
+ __HAL_PWR_OVERDRIVESWITCHING_DISABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Disable the Over-drive */
+ __HAL_PWR_OVERDRIVE_DISABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enters in Under-Drive STOP mode.
+ *
+ * @note This mode can be selected only when the Under-Drive is already active
+ *
+ * @note This mode is enabled only with STOP low power mode.
+ * In this mode, the 1.2V domain is preserved in reduced leakage mode. This
+ * mode is only available when the main regulator or the low power regulator
+ * is in low voltage mode
+ *
+ * @note If the Under-drive mode was enabled, it is automatically disabled after
+ * exiting Stop mode.
+ * When the voltage regulator operates in Under-drive mode, an additional
+ * startup delay is induced when waking up from Stop mode.
+ *
+ * @note In Stop mode, all I/O pins keep the same state as in Run mode.
+ *
+ * @note When exiting Stop mode by issuing an interrupt or a wakeup event,
+ * the HSI RC oscillator is selected as system clock.
+ *
+ * @note When the voltage regulator operates in low power mode, an additional
+ * startup delay is incurred when waking up from Stop mode.
+ * By keeping the internal regulator ON during Stop mode, the consumption
+ * is higher although the startup time is reduced.
+ *
+ * @param Regulator specifies the regulator state in STOP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_UNDERDRIVE_ON: Main Regulator in under-drive mode
+ * and Flash memory in power-down when the device is in Stop under-drive mode
+ * @arg PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON: Low Power Regulator in under-drive mode
+ * and Flash memory in power-down when the device is in Stop under-drive mode
+ * @param STOPEntry specifies if STOP mode in entered with WFI or WFE instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction
+ * @arg PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+ uint32_t tempreg = 0;
+ uint32_t tickstart = 0;
+
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR_UNDERDRIVE(Regulator));
+ assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+
+ /* Enable Power ctrl clock */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ /* Enable the Under-drive Mode ---------------------------------------------*/
+ /* Clear Under-drive flag */
+ __HAL_PWR_CLEAR_ODRUDR_FLAG();
+
+ /* Enable the Under-drive */
+ __HAL_PWR_UNDERDRIVE_ENABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait for UnderDrive mode is ready */
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_UDRDY))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_UDERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Select the regulator state in STOP mode ---------------------------------*/
+ tempreg = PWR->CR1;
+ /* Clear PDDS, LPDS, MRLUDS and LPLUDS bits */
+ tempreg &= (uint32_t)~(PWR_CR1_PDDS | PWR_CR1_LPDS | PWR_CR1_LPUDS | PWR_CR1_MRUDS);
+
+ /* Set LPDS, MRLUDS and LPLUDS bits according to PWR_Regulator value */
+ tempreg |= Regulator;
+
+ /* Store the new value */
+ PWR->CR1 = tempreg;
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+ /* Select STOP mode entry --------------------------------------------------*/
+ if(STOPEntry == PWR_SLEEPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __WFE();
+ }
+ /* Reset SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns Voltage Scaling Range.
+ * @retval VOS bit field (PWR_REGULATOR_VOLTAGE_SCALE1, PWR_REGULATOR_VOLTAGE_SCALE2 or
+ * PWR_REGULATOR_VOLTAGE_SCALE3)PWR_REGULATOR_VOLTAGE_SCALE1
+ */
+uint32_t HAL_PWREx_GetVoltageRange(void)
+{
+ return (PWR->CR1 & PWR_CR1_VOS);
+}
+
+/**
+ * @brief Configures the main internal regulator output voltage.
+ * @param VoltageScaling specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power consumption.
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode,
+ * typical output voltage at 1.4 V,
+ * system frequency up to 216 MHz.
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode,
+ * typical output voltage at 1.2 V,
+ * system frequency up to 180 MHz.
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output range 2 mode,
+ * typical output voltage at 1.00 V,
+ * system frequency up to 151 MHz.
+ * @note To update the system clock frequency(SYSCLK):
+ * - Set the HSI or HSE as system clock frequency using the HAL_RCC_ClockConfig().
+ * - Call the HAL_RCC_OscConfig() to configure the PLL.
+ * - Call HAL_PWREx_ConfigVoltageScaling() API to adjust the voltage scale.
+ * - Set the new system clock frequency using the HAL_RCC_ClockConfig().
+ * @note The scale can be modified only when the HSI or HSE clock source is selected
+ * as system clock source, otherwise the API returns HAL_ERROR.
+ * @note When the PLL is OFF, the voltage scale 3 is automatically selected and the VOS bits
+ * value in the PWR_CR1 register are not taken in account.
+ * @note This API forces the PLL state ON to allow the possibility to configure the voltage scale 1 or 2.
+ * @note The new voltage scale is active only when the PLL is ON.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling)
+{
+ uint32_t tickstart = 0;
+
+ assert_param(IS_PWR_REGULATOR_VOLTAGE(VoltageScaling));
+
+ /* Enable Power ctrl clock */
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Check if the PLL is used as system clock or not */
+ if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
+ {
+ /* Disable the main PLL */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLL is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set Range */
+ __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling);
+
+ /* Enable the main PLL */
+ __HAL_RCC_PLL_ENABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+ while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c
new file mode 100644
index 00000000..bde60779
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c
@@ -0,0 +1,1237 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_rcc.c
+ * @author MCD Application Team
+ * @brief RCC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Reset and Clock Control (RCC) peripheral:
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### RCC specific features #####
+ ==============================================================================
+ [..]
+ After reset the device is running from Internal High Speed oscillator
+ (HSI 16MHz) with Flash 0 wait state, Flash prefetch buffer, D-Cache
+ and I-Cache are disabled, and all peripherals are off except internal
+ SRAM, Flash and JTAG.
+ (+) There is no prescaler on High speed (AHB) and Low speed (APB) busses;
+ all peripherals mapped on these busses are running at HSI speed.
+ (+) The clock for all peripherals is switched off, except the SRAM and FLASH.
+ (+) All GPIOs are in input floating state, except the JTAG pins which
+ are assigned to be used for debug purpose.
+
+ [..]
+ Once the device started from reset, the user application has to:
+ (+) Configure the clock source to be used to drive the System clock
+ (if the application needs higher frequency/performance)
+ (+) Configure the System clock frequency and Flash settings
+ (+) Configure the AHB and APB busses prescalers
+ (+) Enable the clock for the peripheral(s) to be used
+ (+) Configure the clock source(s) for peripherals which clocks are not
+ derived from the System clock (I2S, RTC, ADC, USB OTG FS/SDIO/RNG)
+
+ ##### RCC Limitations #####
+ ==============================================================================
+ [..]
+ A delay between an RCC peripheral clock enable and the effective peripheral
+ enabling should be taken into account in order to manage the peripheral read/write
+ from/to registers.
+ (+) This delay depends on the peripheral mapping.
+ (+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle
+ after the clock enable bit is set on the hardware register
+ (+) If peripheral is mapped on APB: the delay is 2 APB clock cycle
+ after the clock enable bit is set on the hardware register
+
+ [..]
+ Implemented Workaround:
+ (+) For AHB & APB peripherals, a dummy read to the peripheral register has been
+ inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RCC RCC
+ * @brief RCC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup RCC_Private_Macros RCC Private Macros
+ * @{
+ */
+
+#define MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
+#define MCO1_GPIO_PORT GPIOA
+#define MCO1_PIN GPIO_PIN_8
+
+#define MCO2_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
+#define MCO2_GPIO_PORT GPIOC
+#define MCO2_PIN GPIO_PIN_9
+
+/**
+ * @}
+ */
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup RCC_Private_Variables RCC Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Functions RCC Exported Functions
+ * @{
+ */
+
+/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ===============================================================================
+##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ This section provides functions allowing to configure the internal/external oscillators
+ (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System buses clocks (SYSCLK, AHB, APB1
+ and APB2).
+
+ [..] Internal/external clock and PLL configuration
+ (#) HSI (high-speed internal), 16 MHz factory-trimmed RC used directly or through
+ the PLL as System clock source.
+
+ (#) LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC
+ clock source.
+
+ (#) HSE (high-speed external), 4 to 26 MHz crystal oscillator used directly or
+ through the PLL as System clock source. Can be used also as RTC clock source.
+
+ (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source.
+
+ (#) PLL (clocked by HSI or HSE), featuring two different output clocks:
+ (++) The first output is used to generate the high speed system clock (up to 216 MHz)
+ (++) The second output is used to generate the clock for the USB OTG FS (48 MHz),
+ the random analog generator (<=48 MHz) and the SDIO (<= 48 MHz).
+
+ (#) CSS (Clock security system), once enable using the function HAL_RCC_EnableCSS()
+ and if a HSE clock failure occurs(HSE used directly or through PLL as System
+ clock source), the System clock is automatically switched to HSI and an interrupt
+ is generated if enabled. The interrupt is linked to the Cortex-M7 NMI
+ (Non-Maskable Interrupt) exception vector.
+
+ (#) MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL
+ clock (through a configurable prescaler) on PA8 pin.
+
+ (#) MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or PLLI2S
+ clock (through a configurable prescaler) on PC9 pin.
+
+ [..] System, AHB and APB busses clocks configuration
+ (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI,
+ HSE and PLL.
+ The AHB clock (HCLK) is derived from System clock through configurable
+ prescaler and used to clock the CPU, memory and peripherals mapped
+ on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived
+ from AHB clock through configurable prescalers and used to clock
+ the peripherals mapped on these busses. You can use
+ "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks.
+
+ -@- All the peripheral clocks are derived from the System clock (SYSCLK) except:
+ (+@) I2S: the I2S clock can be derived either from a specific PLL (PLLI2S) or
+ from an external clock mapped on the I2S_CKIN pin.
+ You have to use __HAL_RCC_PLLI2S_CONFIG() macro to configure this clock.
+ (+@) SAI: the SAI clock can be derived either from a specific PLL (PLLI2S) or (PLLSAI) or
+ from an external clock mapped on the I2S_CKIN pin.
+ You have to use __HAL_RCC_PLLI2S_CONFIG() macro to configure this clock.
+ (+@) RTC: the RTC clock can be derived either from the LSI, LSE or HSE clock
+ divided by 2 to 31. You have to use __HAL_RCC_RTC_CONFIG() and __HAL_RCC_RTC_ENABLE()
+ macros to configure this clock.
+ (+@) USB OTG FS, SDIO and RTC: USB OTG FS require a frequency equal to 48 MHz
+ to work correctly, while the SDIO require a frequency equal or lower than
+ to 48. This clock is derived of the main PLL through PLLQ divider.
+ (+@) IWDG clock which is always the LSI clock.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Resets the RCC clock configuration to the default reset state.
+ * @note The default reset state of the clock configuration is given below:
+ * - HSI ON and used as system clock source
+ * - HSE, PLL, PLLI2S and PLLSAI OFF
+ * - AHB, APB1 and APB2 prescaler set to 1.
+ * - CSS, MCO1 and MCO2 OFF
+ * - All interrupts disabled
+ * @note This function doesn't modify the configuration of the
+ * - Peripheral clocks
+ * - LSI, LSE and RTC clocks
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_RCC_DeInit(void)
+{
+ uint32_t tickstart;
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Set HSION bit to the reset value */
+ SET_BIT(RCC->CR, RCC_CR_HSION);
+
+ /* Wait till HSI is ready */
+ while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set HSITRIM[4:0] bits to the reset value */
+ SET_BIT(RCC->CR, RCC_CR_HSITRIM_4);
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Reset CFGR register */
+ CLEAR_REG(RCC->CFGR);
+
+ /* Wait till clock switch is ready */
+ while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Clear HSEON, HSEBYP and CSSON bits */
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSEBYP | RCC_CR_CSSON);
+
+ /* Wait till HSE is disabled */
+ while (READ_BIT(RCC->CR, RCC_CR_HSERDY) != RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Clear PLLON bit */
+ CLEAR_BIT(RCC->CR, RCC_CR_PLLON);
+
+ /* Wait till PLL is disabled */
+ while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Reset PLLI2SON bit */
+ CLEAR_BIT(RCC->CR, RCC_CR_PLLI2SON);
+
+ /* Wait till PLLI2S is disabled */
+ while (READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) != RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Reset PLLSAI bit */
+ CLEAR_BIT(RCC->CR, RCC_CR_PLLSAION);
+
+ /* Wait till PLLSAI is disabled */
+ while (READ_BIT(RCC->CR, RCC_CR_PLLSAIRDY) != RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Once PLL, PLLI2S and PLLSAI are OFF, reset PLLCFGR register to default value */
+ RCC->PLLCFGR = RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_2 | 0x20000000U;
+
+ /* Reset PLLI2SCFGR register to default value */
+ RCC->PLLI2SCFGR = RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SR_1;
+
+ /* Reset PLLSAICFGR register to default value */
+ RCC->PLLSAICFGR = RCC_PLLSAICFGR_PLLSAIN_6 | RCC_PLLSAICFGR_PLLSAIN_7 | RCC_PLLSAICFGR_PLLSAIQ_2 | 0x20000000U;
+
+ /* Disable all interrupts */
+ CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE | RCC_CIR_LSERDYIE | RCC_CIR_HSIRDYIE | RCC_CIR_HSERDYIE | RCC_CIR_PLLRDYIE | RCC_CIR_PLLI2SRDYIE | RCC_CIR_PLLSAIRDYIE);
+
+ /* Clear all interrupt flags */
+ SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC | RCC_CIR_LSERDYC | RCC_CIR_HSIRDYC | RCC_CIR_HSERDYC | RCC_CIR_PLLRDYC | RCC_CIR_PLLI2SRDYC | RCC_CIR_PLLSAIRDYC | RCC_CIR_CSSC);
+
+ /* Clear LSION bit */
+ CLEAR_BIT(RCC->CSR, RCC_CSR_LSION);
+
+ /* Reset all CSR flags */
+ SET_BIT(RCC->CSR, RCC_CSR_RMVF);
+
+ /* Update the SystemCoreClock global variable */
+ SystemCoreClock = HSI_VALUE;
+
+ /* Adapt Systick interrupt period */
+ if(HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief Initializes the RCC Oscillators according to the specified parameters in the
+ * RCC_OscInitTypeDef.
+ * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that
+ * contains the configuration information for the RCC Oscillators.
+ * @note The PLL is not disabled when used as system clock.
+ * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not
+ * supported by this function. User should request a transition to LSE Off
+ * first and then LSE On or LSE Bypass.
+ * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not
+ * supported by this function. User should request a transition to HSE Off
+ * first and then HSE On or HSE Bypass.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+{
+ uint32_t tickstart;
+ FlagStatus pwrclkchanged = RESET;
+
+ /* Check Null pointer */
+ if(RCC_OscInitStruct == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
+
+ /*------------------------------- HSE Configuration ------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
+ /* When the HSE is used as system clock or clock source for PLL, It can not be disabled */
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE)
+ || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)))
+ {
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
+ {
+ return HAL_ERROR;
+ }
+ }
+ else
+ {
+ /* Set the new HSE configuration ---------------------------------------*/
+ __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
+
+ /* Check the HSE State */
+ if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF)
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is bypassed or disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*----------------------------- HSI Configuration --------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
+ assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
+
+ /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI)
+ || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)))
+ {
+ /* When HSI is used as system clock it will not disabled */
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
+ {
+ return HAL_ERROR;
+ }
+ /* Otherwise, just the calibration is allowed */
+ else
+ {
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ }
+ else
+ {
+ /* Check the HSI State */
+ if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF)
+ {
+ /* Enable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ else
+ {
+ /* Disable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*------------------------------ LSI Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
+
+ /* Check the LSI State */
+ if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF)
+ {
+ /* Enable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /*------------------------------ LSE Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
+
+ /* Update LSE configuration in Backup Domain control register */
+ /* Requires to enable write access to Backup Domain of necessary */
+ if(__HAL_RCC_PWR_IS_CLK_DISABLED())
+ {
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+ pwrclkchanged = SET;
+ }
+
+ if(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP))
+ {
+ /* Enable write access to Backup domain */
+ PWR->CR1 |= PWR_CR1_DBP;
+
+ /* Wait for Backup domain Write protection disable */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP))
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Set the new LSE configuration -----------------------------------------*/
+ __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
+ /* Check the LSE State */
+ if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF)
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Restore clock configuration if changed */
+ if(pwrclkchanged == SET)
+ {
+ __HAL_RCC_PWR_CLK_DISABLE();
+ }
+ }
+ /*-------------------------------- PLL Configuration -----------------------*/
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
+ if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
+ {
+ /* Check if the PLL is used as system clock or not */
+ if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+ {
+ if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
+ assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM));
+ assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN));
+ assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP));
+ assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ));
+#if defined (RCC_PLLCFGR_PLLR)
+ assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR));
+#endif
+
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Configure the main PLL clock source, multiplication and division factors. */
+#if defined (RCC_PLLCFGR_PLLR)
+ __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
+ RCC_OscInitStruct->PLL.PLLM,
+ RCC_OscInitStruct->PLL.PLLN,
+ RCC_OscInitStruct->PLL.PLLP,
+ RCC_OscInitStruct->PLL.PLLQ,
+ RCC_OscInitStruct->PLL.PLLR);
+#else
+ __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
+ RCC_OscInitStruct->PLL.PLLM,
+ RCC_OscInitStruct->PLL.PLLN,
+ RCC_OscInitStruct->PLL.PLLP,
+ RCC_OscInitStruct->PLL.PLLQ);
+#endif
+
+ /* Enable the main PLL. */
+ __HAL_RCC_PLL_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CPU, AHB and APB busses clocks according to the specified
+ * parameters in the RCC_ClkInitStruct.
+ * @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that
+ * contains the configuration information for the RCC peripheral.
+ * @param FLatency FLASH Latency, this parameter depend on device selected
+ *
+ * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
+ * and updated by HAL_RCC_GetHCLKFreq() function called within this function
+ *
+ * @note The HSI is used (enabled by hardware) as system clock source after
+ * startup from Reset, wake-up from STOP and STANDBY mode, or in case
+ * of failure of the HSE used directly or indirectly as system clock
+ * (if the Clock Security System CSS is enabled).
+ *
+ * @note A switch from one clock source to another occurs only if the target
+ * clock source is ready (clock stable after startup delay or PLL locked).
+ * If a clock source which is not yet ready is selected, the switch will
+ * occur when the clock source will be ready.
+ * You can use HAL_RCC_GetClockConfig() function to know which clock is
+ * currently used as system clock source.
+ * @note Depending on the device voltage range, the software has to set correctly
+ * HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency
+ * (for more details refer to section above "Initialization/de-initialization functions")
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency)
+{
+ uint32_t tickstart = 0;
+
+ /* Check Null pointer */
+ if(RCC_ClkInitStruct == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType));
+ assert_param(IS_FLASH_LATENCY(FLatency));
+
+ /* To correctly read data from FLASH memory, the number of wait states (LATENCY)
+ must be correctly programmed according to the frequency of the CPU clock
+ (HCLK) and the supply voltage of the device. */
+
+ /* Increasing the CPU frequency */
+ if(FLatency > __HAL_FLASH_GET_LATENCY())
+ {
+ /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+ __HAL_FLASH_SET_LATENCY(FLatency);
+
+ /* Check that the new number of wait states is taken into account to access the Flash
+ memory by reading the FLASH_ACR register */
+ if(__HAL_FLASH_GET_LATENCY() != FLatency)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /*-------------------------- HCLK Configuration --------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
+ {
+ /* Set the highest APBx dividers in order to ensure that we do not go through
+ a non-spec phase whatever we decrease or increase HCLK. */
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
+ {
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_HCLK_DIV16);
+ }
+
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
+ {
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, (RCC_HCLK_DIV16 << 3));
+ }
+
+ /* Set the new HCLK clock divider */
+ assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
+ }
+
+ /*------------------------- SYSCLK Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
+ {
+ assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
+
+ /* HSE is selected as System Clock Source */
+ if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+ {
+ /* Check the HSE ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ /* PLL is selected as System Clock Source */
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+ {
+ /* Check the PLL ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ /* HSI is selected as System Clock Source */
+ else
+ {
+ /* Check the HSI ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource);
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos))
+ {
+ if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Decreasing the number of wait states because of lower CPU frequency */
+ if(FLatency < __HAL_FLASH_GET_LATENCY())
+ {
+ /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+ __HAL_FLASH_SET_LATENCY(FLatency);
+
+ /* Check that the new number of wait states is taken into account to access the Flash
+ memory by reading the FLASH_ACR register */
+ if(__HAL_FLASH_GET_LATENCY() != FLatency)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /*-------------------------- PCLK1 Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
+ {
+ assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider);
+ }
+
+ /*-------------------------- PCLK2 Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
+ {
+ assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3));
+ }
+
+ /* Update the SystemCoreClock global variable */
+ SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_Pos];
+
+ /* Configure the source of time base considering new system clocks settings*/
+ HAL_InitTick (TICK_INT_PRIORITY);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions
+ * @brief RCC clocks control functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the RCC Clocks
+ frequencies.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Selects the clock source to output on MCO1 pin(PA8) or on MCO2 pin(PC9).
+ * @note PA8/PC9 should be configured in alternate function mode.
+ * @param RCC_MCOx specifies the output direction for the clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO1: Clock source to output on MCO1 pin(PA8).
+ * @arg RCC_MCO2: Clock source to output on MCO2 pin(PC9).
+ * @param RCC_MCOSource specifies the clock source to output.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
+ * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
+ * @param RCC_MCODiv specifies the MCOx prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCODIV_1: no division applied to MCOx clock
+ * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
+ * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
+ * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
+ * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
+ * @retval None
+ */
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv)
+{
+ GPIO_InitTypeDef GPIO_InitStruct;
+ /* Check the parameters */
+ assert_param(IS_RCC_MCO(RCC_MCOx));
+ assert_param(IS_RCC_MCODIV(RCC_MCODiv));
+ /* RCC_MCO1 */
+ if(RCC_MCOx == RCC_MCO1)
+ {
+ assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource));
+
+ /* MCO1 Clock Enable */
+ MCO1_CLK_ENABLE();
+
+ /* Configure the MCO1 pin in alternate function mode */
+ GPIO_InitStruct.Pin = MCO1_PIN;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
+ HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct);
+
+ /* Mask MCO1 and MCO1PRE[2:0] bits then Select MCO1 clock source and prescaler */
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), (RCC_MCOSource | RCC_MCODiv));
+ }
+ else
+ {
+ assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource));
+
+ /* MCO2 Clock Enable */
+ MCO2_CLK_ENABLE();
+
+ /* Configure the MCO2 pin in alternate function mode */
+ GPIO_InitStruct.Pin = MCO2_PIN;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
+ HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct);
+
+ /* Mask MCO2 and MCO2PRE[2:0] bits then Select MCO2 clock source and prescaler */
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), (RCC_MCOSource | (RCC_MCODiv << 3)));
+ }
+}
+
+/**
+ * @brief Enables the Clock Security System.
+ * @note If a failure is detected on the HSE oscillator clock, this oscillator
+ * is automatically disabled and an interrupt is generated to inform the
+ * software about the failure (Clock Security System Interrupt, CSSI),
+ * allowing the MCU to perform rescue operations. The CSSI is linked to
+ * the Cortex-M7 NMI (Non-Maskable Interrupt) exception vector.
+ * @retval None
+ */
+void HAL_RCC_EnableCSS(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_CSSON);
+}
+
+/**
+ * @brief Disables the Clock Security System.
+ * @retval None
+ */
+void HAL_RCC_DisableCSS(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_CSSON);
+}
+
+/**
+ * @brief Returns the SYSCLK frequency
+ *
+ * @note The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
+ * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**)
+ * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ * @note (*) HSI_VALUE is a constant defined in stm32f7xx_hal_conf.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ * @note (**) HSE_VALUE is a constant defined in stm32f7xx_hal_conf.h file (default value
+ * 25 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * @note The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @note This function can be used by the user application to compute the
+ * baudrate for the communication peripherals or configure other parameters.
+ *
+ * @note Each time SYSCLK changes, this function must be called to update the
+ * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
+ *
+ *
+ * @retval SYSCLK frequency
+ */
+uint32_t HAL_RCC_GetSysClockFreq(void)
+{
+ uint32_t pllm = 0, pllvco = 0, pllp = 0;
+ uint32_t sysclockfreq = 0;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ switch (RCC->CFGR & RCC_CFGR_SWS)
+ {
+ case RCC_SYSCLKSOURCE_STATUS_HSI: /* HSI used as system clock source */
+ {
+ sysclockfreq = HSI_VALUE;
+ break;
+ }
+ case RCC_SYSCLKSOURCE_STATUS_HSE: /* HSE used as system clock source */
+ {
+ sysclockfreq = HSE_VALUE;
+ break;
+ }
+ case RCC_SYSCLKSOURCE_STATUS_PLLCLK: /* PLL used as system clock source */
+ {
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
+ SYSCLK = PLL_VCO / PLLP */
+ pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+ if (__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLCFGR_PLLSRC_HSI)
+ {
+ /* HSE used as PLL clock source */
+ pllvco = (uint32_t) ((((uint64_t) HSE_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm);
+ }
+ else
+ {
+ /* HSI used as PLL clock source */
+ pllvco = (uint32_t) ((((uint64_t) HSI_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm);
+ }
+ pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1 ) *2);
+
+ sysclockfreq = pllvco/pllp;
+ break;
+ }
+ default:
+ {
+ sysclockfreq = HSI_VALUE;
+ break;
+ }
+ }
+ return sysclockfreq;
+}
+
+/**
+ * @brief Returns the HCLK frequency
+ * @note Each time HCLK changes, this function must be called to update the
+ * right HCLK value. Otherwise, any configuration based on this function will be incorrect.
+ * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency.
+ * @retval HCLK frequency
+ */
+uint32_t HAL_RCC_GetHCLKFreq(void)
+{
+ return SystemCoreClock;
+}
+
+/**
+ * @brief Returns the PCLK1 frequency
+ * @note Each time PCLK1 changes, this function must be called to update the
+ * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect.
+ * @retval PCLK1 frequency
+ */
+uint32_t HAL_RCC_GetPCLK1Freq(void)
+{
+ /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/
+ return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1)>> RCC_CFGR_PPRE1_Pos]);
+}
+
+/**
+ * @brief Returns the PCLK2 frequency
+ * @note Each time PCLK2 changes, this function must be called to update the
+ * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect.
+ * @retval PCLK2 frequency
+ */
+uint32_t HAL_RCC_GetPCLK2Freq(void)
+{
+ /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/
+ return (HAL_RCC_GetHCLKFreq()>> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2)>> RCC_CFGR_PPRE2_Pos]);
+}
+
+/**
+ * @brief Configures the RCC_OscInitStruct according to the internal
+ * RCC configuration registers.
+ * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that
+ * will be configured.
+ * @retval None
+ */
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+{
+ /* Set all possible values for the Oscillator type parameter ---------------*/
+ RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
+
+ /* Get the HSE configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
+ }
+ else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
+ }
+
+ /* Get the HSI configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
+ {
+ RCC_OscInitStruct->HSIState = RCC_HSI_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
+ }
+
+ RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos);
+
+ /* Get the LSE configuration -----------------------------------------------*/
+ if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
+ }
+ else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
+ }
+
+ /* Get the LSI configuration -----------------------------------------------*/
+ if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
+ {
+ RCC_OscInitStruct->LSIState = RCC_LSI_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
+ }
+
+ /* Get the PLL configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
+ {
+ RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
+ }
+ RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
+ RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM);
+ RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos);
+ RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1) >> RCC_PLLCFGR_PLLP_Pos);
+ RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos);
+#if defined (RCC_PLLCFGR_PLLR)
+ RCC_OscInitStruct->PLL.PLLR = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> POSITION_VAL(RCC_PLLCFGR_PLLR));
+#endif
+}
+
+/**
+ * @brief Configures the RCC_ClkInitStruct according to the internal
+ * RCC configuration registers.
+ * @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that
+ * will be configured.
+ * @param pFLatency Pointer on the Flash Latency.
+ * @retval None
+ */
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency)
+{
+ /* Set all possible values for the Clock type parameter --------------------*/
+ RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+
+ /* Get the SYSCLK configuration --------------------------------------------*/
+ RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW);
+
+ /* Get the HCLK configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE);
+
+ /* Get the APB1 configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1);
+
+ /* Get the APB2 configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3);
+
+ /* Get the Flash Wait State (Latency) configuration ------------------------*/
+ *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY);
+}
+
+/**
+ * @brief This function handles the RCC CSS interrupt request.
+ * @note This API should be called under the NMI_Handler().
+ * @retval None
+ */
+void HAL_RCC_NMI_IRQHandler(void)
+{
+ /* Check RCC CSSF flag */
+ if(__HAL_RCC_GET_IT(RCC_IT_CSS))
+ {
+ /* RCC Clock Security System interrupt user callback */
+ HAL_RCC_CSSCallback();
+
+ /* Clear RCC CSS pending bit */
+ __HAL_RCC_CLEAR_IT(RCC_IT_CSS);
+ }
+}
+
+/**
+ * @brief RCC Clock Security System interrupt callback
+ * @retval None
+ */
+__weak void HAL_RCC_CSSCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RCC_CSSCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c
new file mode 100644
index 00000000..407609bd
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c
@@ -0,0 +1,1791 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_rcc_ex.c
+ * @author MCD Application Team
+ * @brief Extension RCC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities RCC extension peripheral:
+ * + Extended Peripheral Control functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RCCEx RCCEx
+ * @brief RCCEx HAL module driver
+ * @{
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Defines RCCEx Private Defines
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Macros RCCEx Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Private_Macros RCCEx Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions
+ * @{
+ */
+
+/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions
+ * @brief Extended Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the RCC Clocks
+ frequencies.
+ [..]
+ (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to
+ select the RTC clock source; in this case the Backup domain will be reset in
+ order to modify the RTC Clock source, as consequence RTC registers (including
+ the backup registers) and RCC_BDCR register will be set to their reset values.
+
+@endverbatim
+ * @{
+ */
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || \
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/**
+ * @brief Initializes the RCC extended peripherals clocks according to the specified
+ * parameters in the RCC_PeriphCLKInitTypeDef.
+ * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * contains the configuration information for the Extended Peripherals
+ * clocks(I2S, SAI, LTDC, RTC, TIM, UARTs, USARTs, LTPIM, SDMMC...).
+ *
+ * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
+ * the RTC clock source; in this case the Backup domain will be reset in
+ * order to modify the RTC Clock source, as consequence RTC registers (including
+ * the backup registers) are set to their reset values.
+ *
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tickstart = 0;
+ uint32_t tmpreg0 = 0;
+ uint32_t tmpreg1 = 0;
+ uint32_t plli2sused = 0;
+ uint32_t pllsaiused = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+ /*----------------------------------- I2S configuration ----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2SCLKSOURCE(PeriphClkInit->I2sClockSelection));
+
+ /* Configure I2S Clock source */
+ __HAL_RCC_I2S_CONFIG(PeriphClkInit->I2sClockSelection);
+
+ /* Enable the PLLI2S when it's used as clock source for I2S */
+ if(PeriphClkInit->I2sClockSelection == RCC_I2SCLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1;
+ }
+ }
+
+ /*------------------------------------ SAI1 configuration --------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == (RCC_PERIPHCLK_SAI1))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SAI1CLKSOURCE(PeriphClkInit->Sai1ClockSelection));
+
+ /* Configure SAI1 Clock source */
+ __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection);
+ /* Enable the PLLI2S when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1;
+ }
+ /* Enable the PLLSAI when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)
+ {
+ pllsaiused = 1;
+ }
+ }
+
+ /*------------------------------------ SAI2 configuration --------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == (RCC_PERIPHCLK_SAI2))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SAI2CLKSOURCE(PeriphClkInit->Sai2ClockSelection));
+
+ /* Configure SAI2 Clock source */
+ __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection);
+
+ /* Enable the PLLI2S when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1;
+ }
+ /* Enable the PLLSAI when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)
+ {
+ pllsaiused = 1;
+ }
+ }
+
+ /*-------------------------------------- SPDIF-RX Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX)
+ {
+ plli2sused = 1;
+ }
+
+ /*------------------------------------ RTC configuration --------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+ {
+ /* Check for RTC Parameters used to output RTCCLK */
+ assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR1 |= PWR_CR1_DBP;
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait for Backup domain Write protection disable */
+ while((PWR->CR1 & PWR_CR1_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reset the Backup domain only if the RTC Clock source selection is modified */
+ tmpreg0 = (RCC->BDCR & RCC_BDCR_RTCSEL);
+
+ if((tmpreg0 != 0x00000000U) && (tmpreg0 != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
+ {
+ /* Store the content of BDCR register before the reset of Backup Domain */
+ tmpreg0 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+
+ /* RTC Clock selection can be changed only if the Backup Domain is reset */
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+
+ /* Restore the Content of BDCR register */
+ RCC->BDCR = tmpreg0;
+
+ /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */
+ if (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON))
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+ }
+
+ /*------------------------------------ TIM configuration --------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIMPRES(PeriphClkInit->TIMPresSelection));
+
+ /* Configure Timer Prescaler */
+ __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+ }
+
+ /*-------------------------------------- I2C1 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection));
+
+ /* Configure the I2C1 clock source */
+ __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection);
+ }
+
+ /*-------------------------------------- I2C2 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C2CLKSOURCE(PeriphClkInit->I2c2ClockSelection));
+
+ /* Configure the I2C2 clock source */
+ __HAL_RCC_I2C2_CONFIG(PeriphClkInit->I2c2ClockSelection);
+ }
+
+ /*-------------------------------------- I2C3 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C3CLKSOURCE(PeriphClkInit->I2c3ClockSelection));
+
+ /* Configure the I2C3 clock source */
+ __HAL_RCC_I2C3_CONFIG(PeriphClkInit->I2c3ClockSelection);
+ }
+
+ /*-------------------------------------- I2C4 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C4CLKSOURCE(PeriphClkInit->I2c4ClockSelection));
+
+ /* Configure the I2C4 clock source */
+ __HAL_RCC_I2C4_CONFIG(PeriphClkInit->I2c4ClockSelection);
+ }
+
+ /*-------------------------------------- USART1 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection));
+
+ /* Configure the USART1 clock source */
+ __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection);
+ }
+
+ /*-------------------------------------- USART2 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection));
+
+ /* Configure the USART2 clock source */
+ __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection);
+ }
+
+ /*-------------------------------------- USART3 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection));
+
+ /* Configure the USART3 clock source */
+ __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection);
+ }
+
+ /*-------------------------------------- UART4 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART4CLKSOURCE(PeriphClkInit->Uart4ClockSelection));
+
+ /* Configure the UART4 clock source */
+ __HAL_RCC_UART4_CONFIG(PeriphClkInit->Uart4ClockSelection);
+ }
+
+ /*-------------------------------------- UART5 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART5CLKSOURCE(PeriphClkInit->Uart5ClockSelection));
+
+ /* Configure the UART5 clock source */
+ __HAL_RCC_UART5_CONFIG(PeriphClkInit->Uart5ClockSelection);
+ }
+
+ /*-------------------------------------- USART6 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART6CLKSOURCE(PeriphClkInit->Usart6ClockSelection));
+
+ /* Configure the USART6 clock source */
+ __HAL_RCC_USART6_CONFIG(PeriphClkInit->Usart6ClockSelection);
+ }
+
+ /*-------------------------------------- UART7 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART7CLKSOURCE(PeriphClkInit->Uart7ClockSelection));
+
+ /* Configure the UART7 clock source */
+ __HAL_RCC_UART7_CONFIG(PeriphClkInit->Uart7ClockSelection);
+ }
+
+ /*-------------------------------------- UART8 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART8CLKSOURCE(PeriphClkInit->Uart8ClockSelection));
+
+ /* Configure the UART8 clock source */
+ __HAL_RCC_UART8_CONFIG(PeriphClkInit->Uart8ClockSelection);
+ }
+
+ /*--------------------------------------- CEC Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection));
+
+ /* Configure the CEC clock source */
+ __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection);
+ }
+
+ /*-------------------------------------- CK48 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_CLK48SOURCE(PeriphClkInit->Clk48ClockSelection));
+
+ /* Configure the CLK48 source */
+ __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection);
+
+ /* Enable the PLLSAI when it's used as clock source for CK48 */
+ if(PeriphClkInit->Clk48ClockSelection == RCC_CLK48SOURCE_PLLSAIP)
+ {
+ pllsaiused = 1;
+ }
+ }
+
+ /*-------------------------------------- LTDC Configuration -----------------------------------*/
+#if defined(STM32F746xx) || defined(STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC)
+ {
+ pllsaiused = 1;
+ }
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+ /*-------------------------------------- LPTIM1 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LPTIM1CLK(PeriphClkInit->Lptim1ClockSelection));
+
+ /* Configure the LTPIM1 clock source */
+ __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection);
+ }
+
+ /*------------------------------------- SDMMC1 Configuration ------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SDMMC1CLKSOURCE(PeriphClkInit->Sdmmc1ClockSelection));
+
+ /* Configure the SDMMC1 clock source */
+ __HAL_RCC_SDMMC1_CONFIG(PeriphClkInit->Sdmmc1ClockSelection);
+ }
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ /*------------------------------------- SDMMC2 Configuration ------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC2) == RCC_PERIPHCLK_SDMMC2)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SDMMC2CLKSOURCE(PeriphClkInit->Sdmmc2ClockSelection));
+
+ /* Configure the SDMMC2 clock source */
+ __HAL_RCC_SDMMC2_CONFIG(PeriphClkInit->Sdmmc2ClockSelection);
+ }
+
+ /*------------------------------------- DFSDM1 Configuration -------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_DFSDM1CLKSOURCE(PeriphClkInit->Dfsdm1ClockSelection));
+
+ /* Configure the DFSDM1 interface clock source */
+ __HAL_RCC_DFSDM1_CONFIG(PeriphClkInit->Dfsdm1ClockSelection);
+ }
+
+ /*------------------------------------- DFSDM AUDIO Configuration -------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1_AUDIO) == RCC_PERIPHCLK_DFSDM1_AUDIO)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_DFSDM1AUDIOCLKSOURCE(PeriphClkInit->Dfsdm1AudioClockSelection));
+
+ /* Configure the DFSDM interface clock source */
+ __HAL_RCC_DFSDM1AUDIO_CONFIG(PeriphClkInit->Dfsdm1AudioClockSelection);
+ }
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+ /*-------------------------------------- PLLI2S Configuration ---------------------------------*/
+ /* PLLI2S is configured when a peripheral will use it as source clock : SAI1, SAI2, I2S or SPDIF-RX */
+ if((plli2sused == 1) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S))
+ {
+ /* Disable the PLLI2S */
+ __HAL_RCC_PLLI2S_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLLI2S is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* check for common PLLI2S Parameters */
+ assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+
+ /*----------------- In Case of PLLI2S is selected as source clock for I2S -------------------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) && (PeriphClkInit->I2sClockSelection == RCC_I2SCLKSOURCE_PLLI2S)))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+
+ /* Read PLLI2SP and PLLI2SQ value from PLLI2SCFGR register (this value is not needed for I2S configuration) */
+ tmpreg0 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos);
+ tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos);
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLM) */
+ /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , tmpreg0, tmpreg1, PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /*----------------- In Case of PLLI2S is selected as source clock for SAI -------------------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)) ||
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S)))
+ {
+ /* Check for PLLI2S Parameters */
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+ /* Check for PLLI2S/DIVQ parameters */
+ assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ));
+
+ /* Read PLLI2SP and PLLI2SR values from PLLI2SCFGR register (this value is not needed for SAI configuration) */
+ tmpreg0 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos);
+ tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos);
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN, tmpreg0, PeriphClkInit->PLLI2S.PLLI2SQ, tmpreg1);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+ __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ);
+ }
+
+ /*----------------- In Case of PLLI2S is selected as source clock for SPDIF-RX -------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX)
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP));
+
+ /* Read PLLI2SR value from PLLI2SCFGR register (this value is not needed for SPDIF-RX configuration) */
+ tmpreg0 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos);
+ tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos);
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLM) */
+ /* SPDIFCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, tmpreg0, tmpreg1);
+ }
+
+ /*----------------- In Case of PLLI2S is just selected -----------------*/
+ if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)
+ {
+ /* Check for Parameters */
+ assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP));
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLI2SM) */
+ /* SPDIFRXCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /* Enable the PLLI2S */
+ __HAL_RCC_PLLI2S_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLLI2S is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /*-------------------------------------- PLLSAI Configuration ---------------------------------*/
+ /* PLLSAI is configured when a peripheral will use it as source clock : SAI1, SAI2, LTDC or CK48 */
+ if(pllsaiused == 1)
+ {
+ /* Disable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLLSAI is disabled */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Check the PLLSAI division factors */
+ assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN));
+
+ /*----------------- In Case of PLLSAI is selected as source clock for SAI -------------------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)) ||\
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)))
+ {
+ /* check for PLLSAIQ Parameter */
+ assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ));
+ /* check for PLLSAI/DIVQ Parameter */
+ assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ));
+
+ /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */
+ tmpreg0 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos);
+ tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLSAICFGR_PLLSAIR_Pos);
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg0, PeriphClkInit->PLLSAI.PLLSAIQ, tmpreg1);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+ __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ);
+ }
+
+ /*----------------- In Case of PLLSAI is selected as source clock for CLK48 -------------------*/
+ /* In Case of PLLI2S is selected as source clock for CK48 */
+ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48SOURCE_PLLSAIP))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP));
+ /* Read PLLSAIQ and PLLSAIR value from PLLSAICFGR register (this value is not needed for CK48 configuration) */
+ tmpreg0 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos);
+ tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos);
+
+ /* Configure the PLLSAI division factors */
+ /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) x (PLLI2SN/PLLM) */
+ /* 48CLK = f(PLLSAI clock output) = f(VCO clock) / PLLSAIP */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIP, tmpreg0, tmpreg1);
+ }
+
+#if defined(STM32F746xx) || defined(STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ /*---------------------------- LTDC configuration -------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == (RCC_PERIPHCLK_LTDC))
+ {
+ assert_param(IS_RCC_PLLSAIR_VALUE(PeriphClkInit->PLLSAI.PLLSAIR));
+ assert_param(IS_RCC_PLLSAI_DIVR_VALUE(PeriphClkInit->PLLSAIDivR));
+
+ /* Read PLLSAIP and PLLSAIQ value from PLLSAICFGR register (these value are not needed for LTDC configuration) */
+ tmpreg0 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos);
+ tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos);
+
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* LTDC_CLK(first level) = PLLSAI_VCO Output/PLLSAIR */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg1, tmpreg0, PeriphClkInit->PLLSAI.PLLSAIR);
+
+ /* LTDC_CLK = LTDC_CLK(first level)/PLLSAIDIVR */
+ __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLSAIDivR);
+ }
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+ /* Enable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLLSAI is ready */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Get the RCC_PeriphCLKInitTypeDef according to the internal
+ * RCC configuration registers.
+ * @param PeriphClkInit pointer to the configured RCC_PeriphCLKInitTypeDef structure
+ * @retval None
+ */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tempreg = 0;
+
+ /* Set all possible values for the extended clock type parameter------------*/
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_LPTIM1 |\
+ RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 |\
+ RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_I2C4 |\
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 |\
+ RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_USART1 |\
+ RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 |\
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 |\
+ RCC_PERIPHCLK_USART6 | RCC_PERIPHCLK_UART7 |\
+ RCC_PERIPHCLK_UART8 | RCC_PERIPHCLK_SDMMC1 |\
+ RCC_PERIPHCLK_CLK48 | RCC_PERIPHCLK_SDMMC2 |\
+ RCC_PERIPHCLK_DFSDM1 | RCC_PERIPHCLK_DFSDM1_AUDIO;
+#else
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_LPTIM1 |\
+ RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 |\
+ RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_I2C4 |\
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 |\
+ RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_USART1 |\
+ RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 |\
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 |\
+ RCC_PERIPHCLK_USART6 | RCC_PERIPHCLK_UART7 |\
+ RCC_PERIPHCLK_UART8 | RCC_PERIPHCLK_SDMMC1 |\
+ RCC_PERIPHCLK_CLK48;
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+ /* Get the PLLI2S Clock configuration -----------------------------------------------*/
+ PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos);
+ PeriphClkInit->PLLI2S.PLLI2SP = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos);
+ PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos);
+ PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos);
+
+ /* Get the PLLSAI Clock configuration -----------------------------------------------*/
+ PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos);
+ PeriphClkInit->PLLSAI.PLLSAIP = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos);
+ PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos);
+ PeriphClkInit->PLLSAI.PLLSAIR = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos);
+
+ /* Get the PLLSAI/PLLI2S division factors -------------------------------------------*/
+ PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLI2SDIVQ) >> RCC_DCKCFGR1_PLLI2SDIVQ_Pos);
+ PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLSAIDIVQ) >> RCC_DCKCFGR1_PLLSAIDIVQ_Pos);
+ PeriphClkInit->PLLSAIDivR = (uint32_t)((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLSAIDIVR) >> RCC_DCKCFGR1_PLLSAIDIVR_Pos);
+
+ /* Get the SAI1 clock configuration ----------------------------------------------*/
+ PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE();
+
+ /* Get the SAI2 clock configuration ----------------------------------------------*/
+ PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE();
+
+ /* Get the I2S clock configuration ------------------------------------------*/
+ PeriphClkInit->I2sClockSelection = __HAL_RCC_GET_I2SCLKSOURCE();
+
+ /* Get the I2C1 clock configuration ------------------------------------------*/
+ PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE();
+
+ /* Get the I2C2 clock configuration ------------------------------------------*/
+ PeriphClkInit->I2c2ClockSelection = __HAL_RCC_GET_I2C2_SOURCE();
+
+ /* Get the I2C3 clock configuration ------------------------------------------*/
+ PeriphClkInit->I2c3ClockSelection = __HAL_RCC_GET_I2C3_SOURCE();
+
+ /* Get the I2C4 clock configuration ------------------------------------------*/
+ PeriphClkInit->I2c4ClockSelection = __HAL_RCC_GET_I2C4_SOURCE();
+
+ /* Get the USART1 clock configuration ------------------------------------------*/
+ PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE();
+
+ /* Get the USART2 clock configuration ------------------------------------------*/
+ PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE();
+
+ /* Get the USART3 clock configuration ------------------------------------------*/
+ PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE();
+
+ /* Get the UART4 clock configuration ------------------------------------------*/
+ PeriphClkInit->Uart4ClockSelection = __HAL_RCC_GET_UART4_SOURCE();
+
+ /* Get the UART5 clock configuration ------------------------------------------*/
+ PeriphClkInit->Uart5ClockSelection = __HAL_RCC_GET_UART5_SOURCE();
+
+ /* Get the USART6 clock configuration ------------------------------------------*/
+ PeriphClkInit->Usart6ClockSelection = __HAL_RCC_GET_USART6_SOURCE();
+
+ /* Get the UART7 clock configuration ------------------------------------------*/
+ PeriphClkInit->Uart7ClockSelection = __HAL_RCC_GET_UART7_SOURCE();
+
+ /* Get the UART8 clock configuration ------------------------------------------*/
+ PeriphClkInit->Uart8ClockSelection = __HAL_RCC_GET_UART8_SOURCE();
+
+ /* Get the LPTIM1 clock configuration ------------------------------------------*/
+ PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE();
+
+ /* Get the CEC clock configuration -----------------------------------------------*/
+ PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE();
+
+ /* Get the CK48 clock configuration -----------------------------------------------*/
+ PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE();
+
+ /* Get the SDMMC1 clock configuration -----------------------------------------------*/
+ PeriphClkInit->Sdmmc1ClockSelection = __HAL_RCC_GET_SDMMC1_SOURCE();
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ /* Get the SDMMC2 clock configuration -----------------------------------------------*/
+ PeriphClkInit->Sdmmc2ClockSelection = __HAL_RCC_GET_SDMMC2_SOURCE();
+
+ /* Get the DFSDM clock configuration -----------------------------------------------*/
+ PeriphClkInit->Dfsdm1ClockSelection = __HAL_RCC_GET_DFSDM1_SOURCE();
+
+ /* Get the DFSDM AUDIO clock configuration -----------------------------------------------*/
+ PeriphClkInit->Dfsdm1AudioClockSelection = __HAL_RCC_GET_DFSDM1AUDIO_SOURCE();
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+ /* Get the RTC Clock configuration -----------------------------------------------*/
+ tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+ PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+ /* Get the TIM Prescaler configuration --------------------------------------------*/
+ if ((RCC->DCKCFGR1 & RCC_DCKCFGR1_TIMPRE) == RESET)
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+ }
+ else
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+ }
+}
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx)
+/**
+ * @brief Initializes the RCC extended peripherals clocks according to the specified
+ * parameters in the RCC_PeriphCLKInitTypeDef.
+ * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * contains the configuration information for the Extended Peripherals
+ * clocks(I2S, SAI, RTC, TIM, UARTs, USARTs, LTPIM, SDMMC...).
+ *
+ * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
+ * the RTC clock source; in this case the Backup domain will be reset in
+ * order to modify the RTC Clock source, as consequence RTC registers (including
+ * the backup registers) are set to their reset values.
+ *
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tickstart = 0;
+ uint32_t tmpreg0 = 0;
+ uint32_t plli2sused = 0;
+ uint32_t pllsaiused = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+ /*----------------------------------- I2S configuration ----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2SCLKSOURCE(PeriphClkInit->I2sClockSelection));
+
+ /* Configure I2S Clock source */
+ __HAL_RCC_I2S_CONFIG(PeriphClkInit->I2sClockSelection);
+
+ /* Enable the PLLI2S when it's used as clock source for I2S */
+ if(PeriphClkInit->I2sClockSelection == RCC_I2SCLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1;
+ }
+ }
+
+ /*------------------------------------ SAI1 configuration --------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == (RCC_PERIPHCLK_SAI1))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SAI1CLKSOURCE(PeriphClkInit->Sai1ClockSelection));
+
+ /* Configure SAI1 Clock source */
+ __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection);
+ /* Enable the PLLI2S when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1;
+ }
+ /* Enable the PLLSAI when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)
+ {
+ pllsaiused = 1;
+ }
+ }
+
+ /*------------------------------------ SAI2 configuration --------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == (RCC_PERIPHCLK_SAI2))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SAI2CLKSOURCE(PeriphClkInit->Sai2ClockSelection));
+
+ /* Configure SAI2 Clock source */
+ __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection);
+
+ /* Enable the PLLI2S when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1;
+ }
+ /* Enable the PLLSAI when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)
+ {
+ pllsaiused = 1;
+ }
+ }
+
+ /*------------------------------------ RTC configuration --------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+ {
+ /* Check for RTC Parameters used to output RTCCLK */
+ assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR1 |= PWR_CR1_DBP;
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait for Backup domain Write protection disable */
+ while((PWR->CR1 & PWR_CR1_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reset the Backup domain only if the RTC Clock source selection is modified */
+ tmpreg0 = (RCC->BDCR & RCC_BDCR_RTCSEL);
+
+ if((tmpreg0 != 0x00000000U) && (tmpreg0 != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
+ {
+ /* Store the content of BDCR register before the reset of Backup Domain */
+ tmpreg0 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+
+ /* RTC Clock selection can be changed only if the Backup Domain is reset */
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+
+ /* Restore the Content of BDCR register */
+ RCC->BDCR = tmpreg0;
+
+ /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */
+ if (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON))
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+ }
+
+ /*------------------------------------ TIM configuration --------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIMPRES(PeriphClkInit->TIMPresSelection));
+
+ /* Configure Timer Prescaler */
+ __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+ }
+
+ /*-------------------------------------- I2C1 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection));
+
+ /* Configure the I2C1 clock source */
+ __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection);
+ }
+
+ /*-------------------------------------- I2C2 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C2CLKSOURCE(PeriphClkInit->I2c2ClockSelection));
+
+ /* Configure the I2C2 clock source */
+ __HAL_RCC_I2C2_CONFIG(PeriphClkInit->I2c2ClockSelection);
+ }
+
+ /*-------------------------------------- I2C3 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C3CLKSOURCE(PeriphClkInit->I2c3ClockSelection));
+
+ /* Configure the I2C3 clock source */
+ __HAL_RCC_I2C3_CONFIG(PeriphClkInit->I2c3ClockSelection);
+ }
+
+ /*-------------------------------------- USART1 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection));
+
+ /* Configure the USART1 clock source */
+ __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection);
+ }
+
+ /*-------------------------------------- USART2 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection));
+
+ /* Configure the USART2 clock source */
+ __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection);
+ }
+
+ /*-------------------------------------- USART3 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection));
+
+ /* Configure the USART3 clock source */
+ __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection);
+ }
+
+ /*-------------------------------------- UART4 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART4CLKSOURCE(PeriphClkInit->Uart4ClockSelection));
+
+ /* Configure the UART4 clock source */
+ __HAL_RCC_UART4_CONFIG(PeriphClkInit->Uart4ClockSelection);
+ }
+
+ /*-------------------------------------- UART5 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART5CLKSOURCE(PeriphClkInit->Uart5ClockSelection));
+
+ /* Configure the UART5 clock source */
+ __HAL_RCC_UART5_CONFIG(PeriphClkInit->Uart5ClockSelection);
+ }
+
+ /*-------------------------------------- USART6 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART6CLKSOURCE(PeriphClkInit->Usart6ClockSelection));
+
+ /* Configure the USART6 clock source */
+ __HAL_RCC_USART6_CONFIG(PeriphClkInit->Usart6ClockSelection);
+ }
+
+ /*-------------------------------------- UART7 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART7CLKSOURCE(PeriphClkInit->Uart7ClockSelection));
+
+ /* Configure the UART7 clock source */
+ __HAL_RCC_UART7_CONFIG(PeriphClkInit->Uart7ClockSelection);
+ }
+
+ /*-------------------------------------- UART8 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART8CLKSOURCE(PeriphClkInit->Uart8ClockSelection));
+
+ /* Configure the UART8 clock source */
+ __HAL_RCC_UART8_CONFIG(PeriphClkInit->Uart8ClockSelection);
+ }
+
+ /*-------------------------------------- CK48 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_CLK48SOURCE(PeriphClkInit->Clk48ClockSelection));
+
+ /* Configure the CLK48 source */
+ __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection);
+
+ /* Enable the PLLSAI when it's used as clock source for CK48 */
+ if(PeriphClkInit->Clk48ClockSelection == RCC_CLK48SOURCE_PLLSAIP)
+ {
+ pllsaiused = 1;
+ }
+ }
+
+ /*-------------------------------------- LPTIM1 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LPTIM1CLK(PeriphClkInit->Lptim1ClockSelection));
+
+ /* Configure the LTPIM1 clock source */
+ __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection);
+ }
+
+ /*------------------------------------- SDMMC1 Configuration ------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SDMMC1CLKSOURCE(PeriphClkInit->Sdmmc1ClockSelection));
+
+ /* Configure the SDMMC1 clock source */
+ __HAL_RCC_SDMMC1_CONFIG(PeriphClkInit->Sdmmc1ClockSelection);
+ }
+
+ /*------------------------------------- SDMMC2 Configuration ------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC2) == RCC_PERIPHCLK_SDMMC2)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SDMMC2CLKSOURCE(PeriphClkInit->Sdmmc2ClockSelection));
+
+ /* Configure the SDMMC2 clock source */
+ __HAL_RCC_SDMMC2_CONFIG(PeriphClkInit->Sdmmc2ClockSelection);
+ }
+
+ /*-------------------------------------- PLLI2S Configuration ---------------------------------*/
+ /* PLLI2S is configured when a peripheral will use it as source clock : SAI1, SAI2 or I2S */
+ if((plli2sused == 1) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S))
+ {
+ /* Disable the PLLI2S */
+ __HAL_RCC_PLLI2S_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLLI2S is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* check for common PLLI2S Parameters */
+ assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+
+ /*----------------- In Case of PLLI2S is selected as source clock for I2S -------------------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) && (PeriphClkInit->I2sClockSelection == RCC_I2SCLKSOURCE_PLLI2S)))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+
+ /* Read PLLI2SQ value from PLLI2SCFGR register (this value is not needed for I2S configuration) */
+ tmpreg0 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos);
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLM) */
+ /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , tmpreg0, PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /*----------------- In Case of PLLI2S is selected as source clock for SAI -------------------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)) ||
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S)))
+ {
+ /* Check for PLLI2S Parameters */
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+ /* Check for PLLI2S/DIVQ parameters */
+ assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ));
+
+ /* Read PLLI2SP and PLLI2SR values from PLLI2SCFGR register (this value is not needed for SAI configuration) */
+ tmpreg0 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos);
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SQ, tmpreg0);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+ __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ);
+ }
+
+ /*----------------- In Case of PLLI2S is just selected -----------------*/
+ if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)
+ {
+ /* Check for Parameters */
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLI2SM) */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /* Enable the PLLI2S */
+ __HAL_RCC_PLLI2S_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLLI2S is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /*-------------------------------------- PLLSAI Configuration ---------------------------------*/
+ /* PLLSAI is configured when a peripheral will use it as source clock : SAI1, SAI2, LTDC or CK48 */
+ if(pllsaiused == 1)
+ {
+ /* Disable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLLSAI is disabled */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Check the PLLSAI division factors */
+ assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN));
+
+ /*----------------- In Case of PLLSAI is selected as source clock for SAI -------------------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)) ||\
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)))
+ {
+ /* check for PLLSAIQ Parameter */
+ assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ));
+ /* check for PLLSAI/DIVQ Parameter */
+ assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ));
+
+ /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */
+ tmpreg0 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos);
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg0, PeriphClkInit->PLLSAI.PLLSAIQ);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+ __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ);
+ }
+
+ /*----------------- In Case of PLLSAI is selected as source clock for CLK48 -------------------*/
+ /* In Case of PLLI2S is selected as source clock for CK48 */
+ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48SOURCE_PLLSAIP))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP));
+ /* Read PLLSAIQ and PLLSAIR value from PLLSAICFGR register (this value is not needed for CK48 configuration) */
+ tmpreg0 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos);
+
+ /* Configure the PLLSAI division factors */
+ /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) x (PLLI2SN/PLLM) */
+ /* 48CLK = f(PLLSAI clock output) = f(VCO clock) / PLLSAIP */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIP, tmpreg0);
+ }
+
+ /* Enable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLLSAI is ready */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Get the RCC_PeriphCLKInitTypeDef according to the internal
+ * RCC configuration registers.
+ * @param PeriphClkInit pointer to the configured RCC_PeriphCLKInitTypeDef structure
+ * @retval None
+ */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tempreg = 0;
+
+ /* Set all possible values for the extended clock type parameter------------*/
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_LPTIM1 |\
+ RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 |\
+ RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 |\
+ RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_USART1 |\
+ RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 |\
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 |\
+ RCC_PERIPHCLK_USART6 | RCC_PERIPHCLK_UART7 |\
+ RCC_PERIPHCLK_UART8 | RCC_PERIPHCLK_SDMMC1 |\
+ RCC_PERIPHCLK_CLK48 | RCC_PERIPHCLK_SDMMC2;
+
+ /* Get the PLLI2S Clock configuration -----------------------------------------------*/
+ PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos);
+ PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos);
+ PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos);
+
+ /* Get the PLLSAI Clock configuration -----------------------------------------------*/
+ PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos);
+ PeriphClkInit->PLLSAI.PLLSAIP = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos);
+ PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos);
+
+ /* Get the PLLSAI/PLLI2S division factors -------------------------------------------*/
+ PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLI2SDIVQ) >> RCC_DCKCFGR1_PLLI2SDIVQ_Pos);
+ PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLSAIDIVQ) >> RCC_DCKCFGR1_PLLSAIDIVQ_Pos);
+
+ /* Get the SAI1 clock configuration ----------------------------------------------*/
+ PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE();
+
+ /* Get the SAI2 clock configuration ----------------------------------------------*/
+ PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE();
+
+ /* Get the I2S clock configuration ------------------------------------------*/
+ PeriphClkInit->I2sClockSelection = __HAL_RCC_GET_I2SCLKSOURCE();
+
+ /* Get the I2C1 clock configuration ------------------------------------------*/
+ PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE();
+
+ /* Get the I2C2 clock configuration ------------------------------------------*/
+ PeriphClkInit->I2c2ClockSelection = __HAL_RCC_GET_I2C2_SOURCE();
+
+ /* Get the I2C3 clock configuration ------------------------------------------*/
+ PeriphClkInit->I2c3ClockSelection = __HAL_RCC_GET_I2C3_SOURCE();
+
+ /* Get the USART1 clock configuration ------------------------------------------*/
+ PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE();
+
+ /* Get the USART2 clock configuration ------------------------------------------*/
+ PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE();
+
+ /* Get the USART3 clock configuration ------------------------------------------*/
+ PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE();
+
+ /* Get the UART4 clock configuration ------------------------------------------*/
+ PeriphClkInit->Uart4ClockSelection = __HAL_RCC_GET_UART4_SOURCE();
+
+ /* Get the UART5 clock configuration ------------------------------------------*/
+ PeriphClkInit->Uart5ClockSelection = __HAL_RCC_GET_UART5_SOURCE();
+
+ /* Get the USART6 clock configuration ------------------------------------------*/
+ PeriphClkInit->Usart6ClockSelection = __HAL_RCC_GET_USART6_SOURCE();
+
+ /* Get the UART7 clock configuration ------------------------------------------*/
+ PeriphClkInit->Uart7ClockSelection = __HAL_RCC_GET_UART7_SOURCE();
+
+ /* Get the UART8 clock configuration ------------------------------------------*/
+ PeriphClkInit->Uart8ClockSelection = __HAL_RCC_GET_UART8_SOURCE();
+
+ /* Get the LPTIM1 clock configuration ------------------------------------------*/
+ PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE();
+
+ /* Get the CK48 clock configuration -----------------------------------------------*/
+ PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE();
+
+ /* Get the SDMMC1 clock configuration -----------------------------------------------*/
+ PeriphClkInit->Sdmmc1ClockSelection = __HAL_RCC_GET_SDMMC1_SOURCE();
+
+ /* Get the SDMMC2 clock configuration -----------------------------------------------*/
+ PeriphClkInit->Sdmmc2ClockSelection = __HAL_RCC_GET_SDMMC2_SOURCE();
+
+ /* Get the RTC Clock configuration -----------------------------------------------*/
+ tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+ PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+ /* Get the TIM Prescaler configuration --------------------------------------------*/
+ if ((RCC->DCKCFGR1 & RCC_DCKCFGR1_TIMPRE) == RESET)
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+ }
+ else
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+ }
+}
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx */
+
+/**
+ * @brief Return the peripheral clock frequency for a given peripheral(SAI..)
+ * @note Return 0 if peripheral clock identifier not managed by this API
+ * @param PeriphClk Peripheral clock identifier
+ * This parameter can be one of the following values:
+ * @arg RCC_PERIPHCLK_SAI1: SAI1 peripheral clock
+ * @arg RCC_PERIPHCLK_SAI2: SAI2 peripheral clock
+ * @retval Frequency in KHz
+ */
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk)
+{
+ uint32_t tmpreg = 0;
+ /* This variable is used to store the SAI clock frequency (value in Hz) */
+ uint32_t frequency = 0;
+ /* This variable is used to store the VCO Input (value in Hz) */
+ uint32_t vcoinput = 0;
+ /* This variable is used to store the SAI clock source */
+ uint32_t saiclocksource = 0;
+
+ if (PeriphClk == RCC_PERIPHCLK_SAI1)
+ {
+ saiclocksource = RCC->DCKCFGR1;
+ saiclocksource &= RCC_DCKCFGR1_SAI1SEL;
+ switch (saiclocksource)
+ {
+ case 0: /* PLLSAI is the clock source for SAI1 */
+ {
+ /* Configure the PLLSAI division factor */
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the PLL Source is HSI (Internal Clock) */
+ vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+ else
+ {
+ /* In Case the PLL Source is HSE (External Clock) */
+ vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+ }
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+ tmpreg = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24;
+ frequency = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6))/(tmpreg);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+ tmpreg = (((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLSAIDIVQ) >> 8) + 1);
+ frequency = frequency/(tmpreg);
+ break;
+ }
+ case RCC_DCKCFGR1_SAI1SEL_0: /* PLLI2S is the clock source for SAI1 */
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the PLL Source is HSI (Internal Clock) */
+ vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+ else
+ {
+ /* In Case the PLL Source is HSE (External Clock) */
+ vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+ }
+
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+ tmpreg = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24;
+ frequency = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6))/(tmpreg);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+ tmpreg = ((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLI2SDIVQ) + 1);
+ frequency = frequency/(tmpreg);
+ break;
+ }
+ case RCC_DCKCFGR1_SAI1SEL_1: /* External clock is the clock source for SAI1 */
+ {
+ frequency = EXTERNAL_CLOCK_VALUE;
+ break;
+ }
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ case RCC_DCKCFGR1_SAI1SEL: /* HSI or HSE is the clock source for SAI*/
+ {
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the main PLL Source is HSI */
+ frequency = HSI_VALUE;
+ }
+ else
+ {
+ /* In Case the main PLL Source is HSE */
+ frequency = HSE_VALUE;
+ }
+ break;
+ }
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+ default :
+ {
+ break;
+ }
+ }
+ }
+
+ if (PeriphClk == RCC_PERIPHCLK_SAI2)
+ {
+ saiclocksource = RCC->DCKCFGR1;
+ saiclocksource &= RCC_DCKCFGR1_SAI2SEL;
+ switch (saiclocksource)
+ {
+ case 0: /* PLLSAI is the clock source for SAI*/
+ {
+ /* Configure the PLLSAI division factor */
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the PLL Source is HSI (Internal Clock) */
+ vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+ else
+ {
+ /* In Case the PLL Source is HSE (External Clock) */
+ vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+ }
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+ tmpreg = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24;
+ frequency = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6))/(tmpreg);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+ tmpreg = (((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLSAIDIVQ) >> 8) + 1);
+ frequency = frequency/(tmpreg);
+ break;
+ }
+ case RCC_DCKCFGR1_SAI2SEL_0: /* PLLI2S is the clock source for SAI2 */
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the PLL Source is HSI (Internal Clock) */
+ vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+ else
+ {
+ /* In Case the PLL Source is HSE (External Clock) */
+ vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+ }
+
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+ tmpreg = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24;
+ frequency = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6))/(tmpreg);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+ tmpreg = ((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLI2SDIVQ) + 1);
+ frequency = frequency/(tmpreg);
+ break;
+ }
+ case RCC_DCKCFGR1_SAI2SEL_1: /* External clock is the clock source for SAI2 */
+ {
+ frequency = EXTERNAL_CLOCK_VALUE;
+ break;
+ }
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ case RCC_DCKCFGR1_SAI2SEL: /* HSI or HSE is the clock source for SAI2 */
+ {
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the main PLL Source is HSI */
+ frequency = HSI_VALUE;
+ }
+ else
+ {
+ /* In Case the main PLL Source is HSE */
+ frequency = HSE_VALUE;
+ }
+ break;
+ }
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+ default :
+ {
+ break;
+ }
+ }
+ }
+
+ return frequency;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Exported_Functions_Group2 Extended Clock management functions
+ * @brief Extended Clock management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended clock management functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the
+ activation or deactivation of PLLI2S, PLLSAI.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enable PLLI2S.
+ * @param PLLI2SInit pointer to an RCC_PLLI2SInitTypeDef structure that
+ * contains the configuration information for the PLLI2S
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit)
+{
+ uint32_t tickstart;
+
+ /* Check for parameters */
+ assert_param(IS_RCC_PLLI2SN_VALUE(PLLI2SInit->PLLI2SN));
+ assert_param(IS_RCC_PLLI2SR_VALUE(PLLI2SInit->PLLI2SR));
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PLLI2SInit->PLLI2SQ));
+#if defined(RCC_PLLI2SCFGR_PLLI2SP)
+ assert_param(IS_RCC_PLLI2SP_VALUE(PLLI2SInit->PLLI2SP));
+#endif /* RCC_PLLI2SCFGR_PLLI2SP */
+
+ /* Disable the PLLI2S */
+ __HAL_RCC_PLLI2S_DISABLE();
+
+ /* Wait till PLLI2S is disabled */
+ tickstart = HAL_GetTick();
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Configure the PLLI2S division factors */
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx)
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * PLLI2SN */
+ /* I2SQCLK = PLLI2S_VCO / PLLI2SQ */
+ /* I2SRCLK = PLLI2S_VCO / PLLI2SR */
+ __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SN, PLLI2SInit->PLLI2SQ, PLLI2SInit->PLLI2SR);
+#else
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * PLLI2SN */
+ /* I2SPCLK = PLLI2S_VCO / PLLI2SP */
+ /* I2SQCLK = PLLI2S_VCO / PLLI2SQ */
+ /* I2SRCLK = PLLI2S_VCO / PLLI2SR */
+ __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SN, PLLI2SInit->PLLI2SP, PLLI2SInit->PLLI2SQ, PLLI2SInit->PLLI2SR);
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx */
+
+ /* Enable the PLLI2S */
+ __HAL_RCC_PLLI2S_ENABLE();
+
+ /* Wait till PLLI2S is ready */
+ tickstart = HAL_GetTick();
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable PLLI2S.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void)
+{
+ uint32_t tickstart;
+
+ /* Disable the PLLI2S */
+ __HAL_RCC_PLLI2S_DISABLE();
+
+ /* Wait till PLLI2S is disabled */
+ tickstart = HAL_GetTick();
+ while(READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable PLLSAI.
+ * @param PLLSAIInit pointer to an RCC_PLLSAIInitTypeDef structure that
+ * contains the configuration information for the PLLSAI
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI(RCC_PLLSAIInitTypeDef *PLLSAIInit)
+{
+ uint32_t tickstart;
+
+ /* Check for parameters */
+ assert_param(IS_RCC_PLLSAIN_VALUE(PLLSAIInit->PLLSAIN));
+ assert_param(IS_RCC_PLLSAIQ_VALUE(PLLSAIInit->PLLSAIQ));
+ assert_param(IS_RCC_PLLSAIP_VALUE(PLLSAIInit->PLLSAIP));
+#if defined(RCC_PLLSAICFGR_PLLSAIR)
+ assert_param(IS_RCC_PLLSAIR_VALUE(PLLSAIInit->PLLSAIR));
+#endif /* RCC_PLLSAICFGR_PLLSAIR */
+
+ /* Disable the PLLSAI */
+ __HAL_RCC_PLLSAI_DISABLE();
+
+ /* Wait till PLLSAI is disabled */
+ tickstart = HAL_GetTick();
+ while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Configure the PLLSAI division factors */
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx)
+ /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * PLLSAIN */
+ /* SAIPCLK = PLLSAI_VCO / PLLSAIP */
+ /* SAIQCLK = PLLSAI_VCO / PLLSAIQ */
+ __HAL_RCC_PLLSAI_CONFIG(PLLSAIInit->PLLSAIN, PLLSAIInit->PLLSAIP, PLLSAIInit->PLLSAIQ);
+#else
+ /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * PLLSAIN */
+ /* SAIPCLK = PLLSAI_VCO / PLLSAIP */
+ /* SAIQCLK = PLLSAI_VCO / PLLSAIQ */
+ /* SAIRCLK = PLLSAI_VCO / PLLSAIR */
+ __HAL_RCC_PLLSAI_CONFIG(PLLSAIInit->PLLSAIN, PLLSAIInit->PLLSAIP, \
+ PLLSAIInit->PLLSAIQ, PLLSAIInit->PLLSAIR);
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx */
+
+ /* Enable the PLLSAI */
+ __HAL_RCC_PLLSAI_ENABLE();
+
+ /* Wait till PLLSAI is ready */
+ tickstart = HAL_GetTick();
+ while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable PLLSAI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI(void)
+{
+ uint32_t tickstart;
+
+ /* Disable the PLLSAI */
+ __HAL_RCC_PLLSAI_DISABLE();
+
+ /* Wait till PLLSAI is disabled */
+ tickstart = HAL_GetTick();
+ while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c
new file mode 100644
index 00000000..9d69d226
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c
@@ -0,0 +1,6255 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_tim.c
+ * @author MCD Application Team
+ * @brief TIM HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Timer (TIM) peripheral:
+ * + Time Base Initialization
+ * + Time Base Start
+ * + Time Base Start Interruption
+ * + Time Base Start DMA
+ * + Time Output Compare/PWM Initialization
+ * + Time Output Compare/PWM Channel Configuration
+ * + Time Output Compare/PWM Start
+ * + Time Output Compare/PWM Start Interruption
+ * + Time Output Compare/PWM Start DMA
+ * + Time Input Capture Initialization
+ * + Time Input Capture Channel Configuration
+ * + Time Input Capture Start
+ * + Time Input Capture Start Interruption
+ * + Time Input Capture Start DMA
+ * + Time One Pulse Initialization
+ * + Time One Pulse Channel Configuration
+ * + Time One Pulse Start
+ * + Time Encoder Interface Initialization
+ * + Time Encoder Interface Start
+ * + Time Encoder Interface Start Interruption
+ * + Time Encoder Interface Start DMA
+ * + Commutation Event configuration with Interruption and DMA
+ * + Time OCRef clear configuration
+ * + Time External Clock configuration
+ @verbatim
+ ==============================================================================
+ ##### TIMER Generic features #####
+ ==============================================================================
+ [..] The Timer features include:
+ (#) 16-bit up, down, up/down auto-reload counter.
+ (#) 16-bit programmable prescaler allowing dividing (also on the fly) the
+ counter clock frequency either by any factor between 1 and 65536.
+ (#) Up to 4 independent channels for:
+ (++) Input Capture
+ (++) Output Compare
+ (++) PWM generation (Edge and Center-aligned Mode)
+ (++) One-pulse mode output
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Initialize the TIM low level resources by implementing the following functions
+ depending from feature used :
+ (++) Time Base : HAL_TIM_Base_MspInit()
+ (++) Input Capture : HAL_TIM_IC_MspInit()
+ (++) Output Compare : HAL_TIM_OC_MspInit()
+ (++) PWM generation : HAL_TIM_PWM_MspInit()
+ (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+ (++) Encoder mode output : HAL_TIM_Encoder_MspInit()
+
+ (#) Initialize the TIM low level resources :
+ (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE();
+ (##) TIM pins configuration
+ (+++) Enable the clock for the TIM GPIOs using the following function:
+ __HAL_RCC_GPIOx_CLK_ENABLE();
+ (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+ (#) The external Clock can be configured, if needed (the default clock is the
+ internal clock from the APBx), using the following function:
+ HAL_TIM_ConfigClockSource, the clock configuration should be done before
+ any start function.
+
+ (#) Configure the TIM in the desired functioning mode using one of the
+ initialization function of this driver:
+ (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
+ (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an
+ Output Compare signal.
+ (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a
+ PWM signal.
+ (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an
+ external signal.
+ (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer
+ in One Pulse Mode.
+ (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
+
+ (#) Activate the TIM peripheral using one of the start functions depending from the feature used:
+ (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
+ (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
+ (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
+ (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
+ (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
+ (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
+
+ (#) The DMA Burst is managed with the two following functions:
+ HAL_TIM_DMABurst_WriteStart()
+ HAL_TIM_DMABurst_ReadStart()
+
+ *** Callback registration ***
+ =============================================
+
+ The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1
+ allows the user to configure dynamically the driver callbacks.
+
+ Use Function @ref HAL_TIM_RegisterCallback() to register a callback.
+ @ref HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle,
+ the Callback ID and a pointer to the user callback function.
+
+ Use function @ref HAL_TIM_UnRegisterCallback() to reset a callback to the default
+ weak function.
+ @ref HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle,
+ and the Callback ID.
+
+ These functions allow to register/unregister following callbacks:
+ (+) Base_MspInitCallback : TIM Base Msp Init Callback.
+ (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback.
+ (+) IC_MspInitCallback : TIM IC Msp Init Callback.
+ (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback.
+ (+) OC_MspInitCallback : TIM OC Msp Init Callback.
+ (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback.
+ (+) PWM_MspInitCallback : TIM PWM Msp Init Callback.
+ (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback.
+ (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback.
+ (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback.
+ (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback.
+ (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback.
+ (+) PeriodElapsedCallback : TIM Period Elapsed Callback.
+ (+) TriggerCallback : TIM Trigger Callback.
+ (+) IC_CaptureCallback : TIM Input Capture Callback.
+ (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback.
+ (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback.
+ (+) ErrorCallback : TIM Error Callback.
+ (+) CommutationCallback : TIM Commutation Callback.
+ (+) BreakCallback : TIM Break Callback.
+
+ By default, after the Init and when the state is HAL_TIM_STATE_RESET
+ all interrupt callbacks are set to the corresponding weak functions:
+ examples @ref HAL_TIM_TriggerCallback(), @ref HAL_TIM_ErrorCallback().
+
+ Exception done for MspInit and MspDeInit functions that are reset to the legacy weak
+ functionalities in the Init/DeInit only when these callbacks are null
+ (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init/DeInit
+ keep and use the user MspInit/MspDeInit callbacks (registered beforehand)
+
+ Callbacks can be registered/unregistered in HAL_TIM_STATE_READY state only.
+ Exception done MspInit/MspDeInit that can be registered/unregistered
+ in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state,
+ thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit.
+ In that case first register the MspInit/MspDeInit user callbacks
+ using @ref HAL_TIM_RegisterCallback() before calling DeInit or Init function.
+
+ When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or
+ not defined, the callback registration feature is not available and all callbacks
+ are set to the corresponding weak functions.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup TIM TIM
+ * @brief TIM HAL module driver
+ * @{
+ */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup TIM_Private_Functions
+ * @{
+ */
+/* Private function prototypes -----------------------------------------------*/
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+
+static void TIM_ITRx_SetConfig(TIM_TypeDef* TIMx, uint16_t TIM_ITRx);
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma);
+static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig);
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Functions TIM Exported Functions
+ * @{
+ */
+
+/** @defgroup TIM_Exported_Functions_Group1 Time Base functions
+ * @brief Time Base functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Base functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM base.
+ (+) De-initialize the TIM base.
+ (+) Start the Time Base.
+ (+) Stop the Time Base.
+ (+) Start the Time Base and enable interrupt.
+ (+) Stop the Time Base and disable interrupt.
+ (+) Start the Time Base and enable DMA transfer.
+ (+) Stop the Time Base and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Time base Unit according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy week callbacks */
+ TIM_ResetCallback(htim);
+
+ if(htim->Base_MspInitCallback == NULL)
+ {
+ htim->Base_MspInitCallback = HAL_TIM_Base_MspInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->Base_MspInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ HAL_TIM_Base_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Set the Time Base configuration */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Base peripheral
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if(htim->Base_MspDeInitCallback == NULL)
+ {
+ htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->Base_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_Base_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Base MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Base_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Base MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Base_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Base generation.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Change the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Base generation in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Enable the TIM Update interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ /* Disable the TIM Update interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Base generation in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length);
+
+ /* Enable the TIM Update DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group2 Time Output Compare functions
+ * @brief Time Output Compare functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Output Compare functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Output Compare.
+ (+) De-initialize the TIM Output Compare.
+ (+) Start the Time Output Compare.
+ (+) Stop the Time Output Compare.
+ (+) Start the Time Output Compare and enable interrupt.
+ (+) Stop the Time Output Compare and disable interrupt.
+ (+) Start the Time Output Compare and enable DMA transfer.
+ (+) Stop the Time Output Compare and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Output Compare according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef* htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy week callbacks */
+ TIM_ResetCallback(htim);
+
+ if(htim->OC_MspInitCallback == NULL)
+ {
+ htim->OC_MspInitCallback = HAL_TIM_OC_MspDeInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->OC_MspInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OC_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the Output Compare */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if(htim->OC_MspDeInitCallback == NULL)
+ {
+ htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->OC_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OC_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Output Compare MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Output Compare MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group3 Time PWM functions
+ * @brief Time PWM functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time PWM functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM OPWM.
+ (+) De-initialize the TIM PWM.
+ (+) Start the Time PWM.
+ (+) Stop the Time PWM.
+ (+) Start the Time PWM and enable interrupt.
+ (+) Stop the Time PWM and disable interrupt.
+ (+) Start the Time PWM and enable DMA transfer.
+ (+) Stop the Time PWM and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM PWM Time Base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy week callbacks */
+ TIM_ResetCallback(htim);
+
+ if(htim->PWM_MspInitCallback == NULL)
+ {
+ htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->PWM_MspInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_PWM_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the PWM */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if(htim->PWM_MspDeInitCallback == NULL)
+ {
+ htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->PWM_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_PWM_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM PWM MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_PWM_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM PWM MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_PWM_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the PWM signal generation.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the PWM signal generation in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM PWM signal generation in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Output Capture/Compare 3 request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM PWM signal generation in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group4 Time Input Capture functions
+ * @brief Time Input Capture functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Input Capture functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Input Capture.
+ (+) De-initialize the TIM Input Capture.
+ (+) Start the Time Input Capture.
+ (+) Stop the Time Input Capture.
+ (+) Start the Time Input Capture and enable interrupt.
+ (+) Stop the Time Input Capture and disable interrupt.
+ (+) Start the Time Input Capture and enable DMA transfer.
+ (+) Stop the Time Input Capture and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Input Capture Time base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy week callbacks */
+ TIM_ResetCallback(htim);
+
+ if(htim->IC_MspInitCallback == NULL)
+ {
+ htim->IC_MspInitCallback = HAL_TIM_IC_MspInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->IC_MspInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_IC_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the input capture */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if(htim->IC_MspDeInitCallback == NULL)
+ {
+ htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->IC_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_IC_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM INput Capture MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_IC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Input Capture MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_IC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement on in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData The destination Buffer address.
+ * @param Length The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement on in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group5 Time One Pulse functions
+ * @brief Time One Pulse functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time One Pulse functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM One Pulse.
+ (+) De-initialize the TIM One Pulse.
+ (+) Start the Time One Pulse.
+ (+) Stop the Time One Pulse.
+ (+) Start the Time One Pulse and enable interrupt.
+ (+) Stop the Time One Pulse and disable interrupt.
+ (+) Start the Time One Pulse and enable DMA transfer.
+ (+) Stop the Time One Pulse and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM One Pulse Time Base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OnePulseMode Select the One pulse mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated.
+ * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_OPM_MODE(OnePulseMode));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy week callbacks */
+ TIM_ResetCallback(htim);
+
+ if(htim->OnePulse_MspDeInitCallback == NULL)
+ {
+ htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->OnePulse_MspDeInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OnePulse_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Configure the Time base in the One Pulse Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Reset the OPM Bit */
+ htim->Instance->CR1 &= ~TIM_CR1_OPM;
+
+ /* Configure the OPM Mode */
+ htim->Instance->CR1 |= OnePulseMode;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM One Pulse
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if(htim->OnePulse_MspDeInitCallback == NULL)
+ {
+ htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->OnePulse_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_OnePulse_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM One Pulse MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OnePulse_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM One Pulse MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(OutputChannel);
+
+ /* Enable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+ No need to enable the counter, it's enabled automatically by hardware
+ (the counter starts in response to a stimulus and generate a pulse */
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel TIM Channels to be disable.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(OutputChannel);
+
+ /* Disable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Enable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+ No need to enable the counter, it's enabled automatically by hardware
+ (the counter starts in response to a stimulus and generate a pulse */
+
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(OutputChannel);
+
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(OutputChannel);
+
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+ /* Disable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group6 Time Encoder functions
+ * @brief Time Encoder functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Encoder functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Encoder.
+ (+) De-initialize the TIM Encoder.
+ (+) Start the Time Encoder.
+ (+) Stop the Time Encoder.
+ (+) Start the Time Encoder and enable interrupt.
+ (+) Stop the Time Encoder and disable interrupt.
+ (+) Start the Time Encoder and enable DMA transfer.
+ (+) Stop the Time Encoder and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Encoder Interface and create the associated handle.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig TIM Encoder Interface configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig)
+{
+ uint32_t tmpsmcr = 0;
+ uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+ assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC2Polarity));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy week callbacks */
+ TIM_ResetCallback(htim);
+
+ if(htim->Encoder_MspInitCallback == NULL)
+ {
+ htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->Encoder_MspInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_Encoder_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Reset the SMS bits */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+
+ /* Configure the Time base in the Encoder Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = htim->Instance->CCMR1;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = htim->Instance->CCER;
+
+ /* Set the encoder Mode */
+ tmpsmcr |= sConfig->EncoderMode;
+
+ /* Select the Capture Compare 1 and the Capture Compare 2 as input */
+ tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S);
+ tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8));
+
+ /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */
+ tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC);
+ tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F);
+ tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8);
+ tmpccmr1 |= (sConfig->IC1Filter << 4) | (sConfig->IC2Filter << 12);
+
+ /* Set the TI1 and the TI2 Polarities */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P);
+ tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP);
+ tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4);
+
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ /* Write to TIMx CCMR1 */
+ htim->Instance->CCMR1 = tmpccmr1;
+
+ /* Write to TIMx CCER */
+ htim->Instance->CCER = tmpccer;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Encoder interface
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if(htim->Encoder_MspDeInitCallback == NULL)
+ {
+ htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->Encoder_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_Encoder_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Encoder Interface MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Encoder_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Encoder Interface MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Encoder_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Enable the encoder interface channels */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ break;
+ }
+ }
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+ break;
+ }
+ }
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Enable the encoder interface channels */
+ /* Enable the capture compare Interrupts 1 and/or 2 */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ if(Channel == TIM_CHANNEL_1)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 1 */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ else if(Channel == TIM_CHANNEL_2)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 2 */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ else
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 1 and 2 */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @param pData1 The destination Buffer address for IC1.
+ * @param pData2 The destination Buffer address for IC2.
+ * @param Length The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((((pData1 == 0) || (pData2 == 0) )) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t )pData1, Length);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError;
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ }
+ break;
+
+ case TIM_CHANNEL_ALL:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length);
+
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ default:
+ break;
+ }
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ if(Channel == TIM_CHANNEL_1)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 1 */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ else if(Channel == TIM_CHANNEL_2)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 2 */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ else
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 1 and 2 */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management
+ * @brief IRQ handler management
+ *
+@verbatim
+ ==============================================================================
+ ##### IRQ handler management #####
+ ==============================================================================
+ [..]
+ This section provides Timer IRQ handler function.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief This function handles TIM interrupts requests.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim)
+{
+ /* Capture compare 1 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) !=RESET)
+ {
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+
+ /* Input capture event */
+ if((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00)
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->IC_CaptureCallback(htim);
+#else
+ HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ /* Output compare event */
+ else
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->OC_DelayElapsedCallback(htim);
+ htim->PWM_PulseFinishedCallback(htim);
+#else
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ }
+ /* Capture compare 2 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ /* Input capture event */
+ if((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00)
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->IC_CaptureCallback(htim);
+#else
+ HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ /* Output compare event */
+ else
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->OC_DelayElapsedCallback(htim);
+ htim->PWM_PulseFinishedCallback(htim);
+#else
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* Capture compare 3 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ /* Input capture event */
+ if((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00)
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->IC_CaptureCallback(htim);
+#else
+ HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ /* Output compare event */
+ else
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->OC_DelayElapsedCallback(htim);
+ htim->PWM_PulseFinishedCallback(htim);
+#else
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* Capture compare 4 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ /* Input capture event */
+ if((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00)
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->IC_CaptureCallback(htim);
+#else
+ HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ /* Output compare event */
+ else
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->OC_DelayElapsedCallback(htim);
+ htim->PWM_PulseFinishedCallback(htim);
+#else
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* TIM Update event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE);
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->PeriodElapsedCallback(htim);
+#else
+ HAL_TIM_PeriodElapsedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ }
+ /* TIM Break input event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK);
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->BreakCallback(htim);
+#else
+ HAL_TIMEx_BreakCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ }
+ }
+
+ /* TIM Break input event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK2) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK);
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->BreakCallback(htim);
+#else
+ HAL_TIMEx_BreakCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ }
+
+ /* TIM Trigger detection event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER);
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->TriggerCallback(htim);
+#else
+ HAL_TIM_TriggerCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ }
+ /* TIM commutation event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM);
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->CommutationCallback(htim);
+#else
+ HAL_TIMEx_CommutationCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group8 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
+ (+) Configure External Clock source.
+ (+) Configure Complementary channels, break features and dead time.
+ (+) Configure Master and the Slave synchronization.
+ (+) Configure the DMA Burst Mode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the TIM Output Compare Channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig TIM Output Compare configuration structure
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 1 in Output Compare */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 2 in Output Compare */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 3 in Output Compare */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 4 in Output Compare */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ default:
+ break;
+ }
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Input Capture Channels according to the specified
+ * parameters in the TIM_IC_InitTypeDef.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig TIM Input Capture configuration structure
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ if (Channel == TIM_CHANNEL_1)
+ {
+ /* TI1 Configuration */
+ TIM_TI1_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+ /* Set the IC1PSC value */
+ htim->Instance->CCMR1 |= sConfig->ICPrescaler;
+ }
+ else if (Channel == TIM_CHANNEL_2)
+ {
+ /* TI2 Configuration */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_TI2_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC2PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+ /* Set the IC2PSC value */
+ htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8);
+ }
+ else if (Channel == TIM_CHANNEL_3)
+ {
+ /* TI3 Configuration */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ TIM_TI3_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC3PSC Bits */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC;
+
+ /* Set the IC3PSC value */
+ htim->Instance->CCMR2 |= sConfig->ICPrescaler;
+ }
+ else
+ {
+ /* TI4 Configuration */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ TIM_TI4_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC4PSC Bits */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC;
+
+ /* Set the IC4PSC value */
+ htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8);
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM PWM channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig TIM PWM configuration structure
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ __HAL_LOCK(htim);
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+ assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ /* Configure the Channel 1 in PWM mode */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel1 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ /* Configure the Channel 2 in PWM mode */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel2 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode << 8;
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ /* Configure the Channel 3 in PWM mode */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel3 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ /* Configure the Channel 4 in PWM mode */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel4 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode << 8;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM One Pulse Channels according to the specified
+ * parameters in the TIM_OnePulse_InitTypeDef.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig TIM One Pulse configuration structure
+ * @param OutputChannel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param InputChannel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel)
+{
+ TIM_OC_InitTypeDef temp1;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_OPM_CHANNELS(OutputChannel));
+ assert_param(IS_TIM_OPM_CHANNELS(InputChannel));
+
+ if(OutputChannel != InputChannel)
+ {
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Extract the Output compare configuration from sConfig structure */
+ temp1.OCMode = sConfig->OCMode;
+ temp1.Pulse = sConfig->Pulse;
+ temp1.OCPolarity = sConfig->OCPolarity;
+ temp1.OCNPolarity = sConfig->OCNPolarity;
+ temp1.OCIdleState = sConfig->OCIdleState;
+ temp1.OCNIdleState = sConfig->OCNIdleState;
+
+ switch (OutputChannel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ TIM_OC1_SetConfig(htim->Instance, &temp1);
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_OC2_SetConfig(htim->Instance, &temp1);
+ }
+ break;
+ default:
+ break;
+ }
+ switch (InputChannel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity,
+ sConfig->ICSelection, sConfig->ICFilter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+ /* Select the Trigger source */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI1FP1;
+
+ /* Select the Slave Mode */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity,
+ sConfig->ICSelection, sConfig->ICFilter);
+
+ /* Reset the IC2PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+ /* Select the Trigger source */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI2FP2;
+
+ /* Select the Slave Mode */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param BurstBaseAddress TIM Base address from when the DMA will starts the Data write.
+ * This parameters can be on of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_DCR
+ * @param BurstRequestSrc TIM DMA Request sources.
+ * This parameters can be on of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer The Buffer address.
+ * @param BurstLength DMA Burst length. This parameter can be one value
+ * between TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+ uint32_t* BurstBuffer, uint32_t BurstLength)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+ assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((BurstBuffer == 0 ) && (BurstLength > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = HAL_TIMEx_DMACommutationCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ default:
+ break;
+ }
+ /* configure the DMA Burst Mode */
+ htim->Instance->DCR = BurstBaseAddress | BurstLength;
+
+ /* Enable the TIM DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM DMA Burst mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param BurstRequestSrc TIM DMA Request sources to disable
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+ /* Abort the DMA transfer (at least disable the DMA channel) */
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param BurstBaseAddress TIM Base address from when the DMA will starts the Data read.
+ * This parameters can be on of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_DCR
+ * @param BurstRequestSrc TIM DMA Request sources.
+ * This parameters can be on of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer The Buffer address.
+ * @param BurstLength DMA Burst length. This parameter can be one value
+ * between TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+ uint32_t *BurstBuffer, uint32_t BurstLength)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+ assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((BurstBuffer == 0 ) && (BurstLength > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = HAL_TIMEx_DMACommutationCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* configure the DMA Burst Mode */
+ htim->Instance->DCR = BurstBaseAddress | BurstLength;
+
+ /* Enable the TIM DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop the DMA burst reading
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param BurstRequestSrc TIM DMA Request sources to disable.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+ /* Abort the DMA transfer (at least disable the DMA channel) */
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Generate a software event
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param EventSource specifies the event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source
+ * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source
+ * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source
+ * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source
+ * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source
+ * @arg TIM_EVENTSOURCE_COM: Timer COM event source
+ * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source
+ * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source
+ * @arg TIM_EVENTSOURCE_BREAK2: Timer Break2 event source
+ * @note TIM6 and TIM7 can only generate an update event.
+ * @note TIM_EVENTSOURCE_COM, TIM_EVENTSOURCE_BREAK and TIM_EVENTSOURCE_BREAK2 are used only with TIM1 and TIM8.
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_EVENT_SOURCE(EventSource));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ /* Change the TIM state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Set the event sources */
+ htim->Instance->EGR = EventSource;
+
+ /* Change the TIM state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the OCRef clear feature
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that
+ * contains the OCREF clear feature and parameters for the TIM peripheral.
+ * @param Channel specifies the TIM Channel.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ if(sClearInputConfig->ClearInputSource == TIM_CLEARINPUTSOURCE_ETR)
+ {
+ assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
+ assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
+ assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
+
+ TIM_ETR_SetConfig(htim->Instance,
+ sClearInputConfig->ClearInputPrescaler,
+ sClearInputConfig->ClearInputPolarity,
+ sClearInputConfig->ClearInputFilter);
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 2 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 2 */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 3 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 3 */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 4 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 4 */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the clock source to be used
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that
+ * contains the clock source information for the TIM peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig)
+{
+ uint32_t tmpsmcr = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource));
+
+ /* Reset the SMS, TS, ECE, ETPS and ETRF bits */
+ tmpsmcr = htim->Instance->SMCR;
+ tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+ htim->Instance->SMCR = tmpsmcr;
+
+ switch (sClockSourceConfig->ClockSource)
+ {
+ case TIM_CLOCKSOURCE_INTERNAL:
+ {
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ /* Disable slave mode to clock the prescaler directly with the internal clock */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_ETRMODE1:
+ {
+ assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+ /* Configure the ETR Clock source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sClockSourceConfig->ClockPrescaler,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+ /* Reset the SMS and TS Bits */
+ tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+ /* Select the External clock mode1 and the ETRF trigger */
+ tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1);
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_ETRMODE2:
+ {
+ assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ /* Configure the ETR Clock source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sClockSourceConfig->ClockPrescaler,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ /* Enable the External clock mode2 */
+ htim->Instance->SMCR |= TIM_SMCR_ECE;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_TI1:
+ {
+ assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+ /* Check TI1 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1);
+ }
+ break;
+ case TIM_CLOCKSOURCE_TI2:
+ {
+ assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+ /* Check TI1 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI2_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2);
+ }
+ break;
+ case TIM_CLOCKSOURCE_TI1ED:
+ {
+ assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+ /* Check TI1 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR0:
+ {
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR0);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR1:
+ {
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR1);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR2:
+ {
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR2);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR3:
+ {
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR3);
+ }
+ break;
+
+ default:
+ break;
+ }
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Selects the signal connected to the TI1 input: direct from CH1_input
+ * or a XOR combination between CH1_input, CH2_input & CH3_input
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param TI1_Selection Indicate whether or not channel 1 is connected to the
+ * output of a XOR gate.
+ * This parameter can be one of the following values:
+ * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input
+ * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3
+ * pins are connected to the TI1 input (XOR combination)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection)
+{
+ uint32_t tmpcr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TI1SELECTION(TI1_Selection));
+
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = htim->Instance->CR2;
+
+ /* Reset the TI1 selection */
+ tmpcr2 &= ~TIM_CR2_TI1S;
+
+ /* Set the TI1 selection */
+ tmpcr2 |= TI1_Selection;
+
+ /* Write to TIMxCR2 */
+ htim->Instance->CR2 = tmpcr2;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in Slave mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that
+ * contains the selected trigger (internal trigger input, filtered
+ * timer input or external trigger input) and the ) and the Slave
+ * mode (Disable, Reset, Gated, Trigger, External clock mode 1).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ uint32_t tmpsmcr = 0;
+ uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+ assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Reset the Trigger Selection Bits */
+ tmpsmcr &= ~TIM_SMCR_TS;
+ /* Set the Input Trigger source */
+ tmpsmcr |= sSlaveConfig->InputTrigger;
+
+ /* Reset the slave mode Bits */
+ tmpsmcr &= ~TIM_SMCR_SMS;
+ /* Set the slave mode */
+ tmpsmcr |= sSlaveConfig->SlaveMode;
+
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ /* Configure the trigger prescaler, filter, and polarity */
+ switch (sSlaveConfig->InputTrigger)
+ {
+ case TIM_TS_ETRF:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+ /* Configure the ETR Trigger source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sSlaveConfig->TriggerPrescaler,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_TI1F_ED:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ tmpccer = htim->Instance->CCER;
+ htim->Instance->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = htim->Instance->CCMR1;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ htim->Instance->CCMR1 = tmpccmr1;
+ htim->Instance->CCER = tmpccer;
+
+ }
+ break;
+
+ case TIM_TS_TI1FP1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI1 Filter and Polarity */
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_TI2FP2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI2 Filter and Polarity */
+ TIM_TI2_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_ITR0:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR1:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR2:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR3:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in Slave mode in interrupt mode
+ * @param htim TIM handle.
+ * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that
+ * contains the selected trigger (internal trigger input, filtered
+ * timer input or external trigger input) and the ) and the Slave
+ * mode (Disable, Reset, Gated, Trigger, External clock mode 1).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+ assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
+
+ /* Enable Trigger Interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER);
+
+ /* Disable Trigger DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read the captured value from Capture Compare unit
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval Captured value
+ */
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpreg = 0;
+
+ __HAL_LOCK(htim);
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Return the capture 1 value */
+ tmpreg = htim->Instance->CCR1;
+
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Return the capture 2 value */
+ tmpreg = htim->Instance->CCR2;
+
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ /* Return the capture 3 value */
+ tmpreg = htim->Instance->CCR3;
+
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ /* Return the capture 4 value */
+ tmpreg = htim->Instance->CCR4;
+
+ break;
+ }
+
+ default:
+ break;
+ }
+
+ __HAL_UNLOCK(htim);
+ return tmpreg;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
+ * @brief TIM Callbacks functions
+ *
+@verbatim
+ ==============================================================================
+ ##### TIM Callbacks functions #####
+ ==============================================================================
+ [..]
+ This section provides TIM callback functions:
+ (+) Timer Period elapsed callback
+ (+) Timer Output Compare callback
+ (+) Timer Input capture callback
+ (+) Timer Trigger callback
+ (+) Timer Error callback
+ (+) Timer_RegisterCallback
+ (+) Timer_UnRegisterCallback
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Period elapsed callback in non blocking mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_PeriodElapsedCallback could be implemented in the user file
+ */
+
+}
+/**
+ * @brief Output Compare callback in non blocking mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file
+ */
+}
+/**
+ * @brief Input Capture callback in non blocking mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_IC_CaptureCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief PWM Pulse finished callback in non blocking mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Hall Trigger detection callback in non blocking mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_TriggerCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Timer error callback in non blocking mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_ErrorCallback could be implemented in the user file
+ */
+}
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+/**
+ * @brief Register a User TIM callback to be used instead of the weak predefined callback
+ * @param htim tim handle
+ * @param CallbackID ID of the callback to be registered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID
+ * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID
+ * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID
+ * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID
+ * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID
+ * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID
+ * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID
+ * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID
+ * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID
+ * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID
+ * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID
+ * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID
+ * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID
+ * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID
+ * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID
+ * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID
+ * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID
+ * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID
+ * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID
+ * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID
+ * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID
+ * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID
+ * @param pCallback pointer to the callback function
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, pTIM_CallbackTypeDef pCallback)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if(pCallback == NULL)
+ {
+ return HAL_ERROR;
+ }
+ /* Process locked */
+ __HAL_LOCK(htim);
+
+ if(htim->State == HAL_TIM_STATE_READY)
+ {
+ switch (CallbackID)
+ {
+ case HAL_TIM_BASE_MSPINIT_CB_ID :
+ htim->Base_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_BASE_MSPDEINIT_CB_ID :
+ htim->Base_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_IC_MSPINIT_CB_ID :
+ htim->IC_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_IC_MSPDEINIT_CB_ID :
+ htim->IC_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_OC_MSPINIT_CB_ID :
+ htim->OC_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_OC_MSPDEINIT_CB_ID :
+ htim->OC_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_PWM_MSPINIT_CB_ID :
+ htim->PWM_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_PWM_MSPDEINIT_CB_ID :
+ htim->PWM_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
+ htim->OnePulse_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
+ htim->OnePulse_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ENCODER_MSPINIT_CB_ID :
+ htim->Encoder_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
+ htim->Encoder_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
+ htim->HallSensor_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
+ htim->HallSensor_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_PERIOD_ELAPSED_CB_ID :
+ htim->PeriodElapsedCallback = pCallback;
+ break;
+
+ case HAL_TIM_TRIGGER_CB_ID :
+ htim->TriggerCallback = pCallback;
+ break;
+
+ case HAL_TIM_IC_CAPTURE_CB_ID :
+ htim->IC_CaptureCallback = pCallback;
+ break;
+
+ case HAL_TIM_OC_DELAY_ELAPSED_CB_ID :
+ htim->OC_DelayElapsedCallback = pCallback;
+ break;
+
+ case HAL_TIM_PWM_PULSE_FINISHED_CB_ID :
+ htim->PWM_PulseFinishedCallback = pCallback;
+ break;
+
+ case HAL_TIM_ERROR_CB_ID :
+ htim->ErrorCallback = pCallback;
+ break;
+
+ case HAL_TIM_COMMUTATION_CB_ID :
+ htim->CommutationCallback = pCallback;
+ break;
+
+ case HAL_TIM_BREAK_CB_ID :
+ htim->BreakCallback = pCallback;
+ break;
+
+ default :
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ switch (CallbackID)
+ {
+ case HAL_TIM_BASE_MSPINIT_CB_ID :
+ htim->Base_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_BASE_MSPDEINIT_CB_ID :
+ htim->Base_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_IC_MSPINIT_CB_ID :
+ htim->IC_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_IC_MSPDEINIT_CB_ID :
+ htim->IC_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_OC_MSPINIT_CB_ID :
+ htim->OC_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_OC_MSPDEINIT_CB_ID :
+ htim->OC_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_PWM_MSPINIT_CB_ID :
+ htim->PWM_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_PWM_MSPDEINIT_CB_ID :
+ htim->PWM_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
+ htim->OnePulse_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
+ htim->OnePulse_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ENCODER_MSPINIT_CB_ID :
+ htim->Encoder_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
+ htim->Encoder_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
+ htim->HallSensor_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
+ htim->HallSensor_MspDeInitCallback = pCallback;
+ break;
+
+ default :
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return status;
+}
+
+/**
+ * @brief Unregister a TIM callback
+ * TIM callback is redirected to the weak predefined callback
+ * @param htim tim handle
+ * @param CallbackID ID of the callback to be unregistered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID
+ * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID
+ * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID
+ * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID
+ * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID
+ * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID
+ * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID
+ * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID
+ * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID
+ * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID
+ * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID
+ * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID
+ * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID
+ * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID
+ * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID
+ * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID
+ * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID
+ * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID
+ * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID
+ * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID
+ * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID
+ * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(htim);
+
+ if(htim->State == HAL_TIM_STATE_READY)
+ {
+ switch (CallbackID)
+ {
+ case HAL_TIM_BASE_MSPINIT_CB_ID :
+ htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */
+ break;
+
+ case HAL_TIM_BASE_MSPDEINIT_CB_ID :
+ htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_IC_MSPINIT_CB_ID :
+ htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */
+ break;
+
+ case HAL_TIM_IC_MSPDEINIT_CB_ID :
+ htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_OC_MSPINIT_CB_ID :
+ htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */
+ break;
+
+ case HAL_TIM_OC_MSPDEINIT_CB_ID :
+ htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_PWM_MSPINIT_CB_ID :
+ htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */
+ break;
+
+ case HAL_TIM_PWM_MSPDEINIT_CB_ID :
+ htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
+ htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
+ htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_ENCODER_MSPINIT_CB_ID :
+ htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */
+ break;
+
+ case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
+ htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
+ htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
+ htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_PERIOD_ELAPSED_CB_ID :
+ htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak Period Elapsed Callback */
+ break;
+
+ case HAL_TIM_TRIGGER_CB_ID :
+ htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak Trigger Callback */
+ break;
+
+ case HAL_TIM_IC_CAPTURE_CB_ID :
+ htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC Capture Callback */
+ break;
+
+ case HAL_TIM_OC_DELAY_ELAPSED_CB_ID :
+ htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC Delay Elapsed Callback */
+ break;
+
+ case HAL_TIM_PWM_PULSE_FINISHED_CB_ID :
+ htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM Pulse Finished Callback */
+ break;
+
+ case HAL_TIM_ERROR_CB_ID :
+ htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak Error Callback */
+ break;
+
+ case HAL_TIM_COMMUTATION_CB_ID :
+ htim->CommutationCallback = HAL_TIMEx_CommutationCallback; /* Legacy weak Commutation Callback */
+ break;
+
+ case HAL_TIM_BREAK_CB_ID :
+ htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak Break Callback */
+ break;
+
+ default :
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ switch (CallbackID)
+ {
+ case HAL_TIM_BASE_MSPINIT_CB_ID :
+ htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */
+ break;
+
+ case HAL_TIM_BASE_MSPDEINIT_CB_ID :
+ htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_IC_MSPINIT_CB_ID :
+ htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */
+ break;
+
+ case HAL_TIM_IC_MSPDEINIT_CB_ID :
+ htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_OC_MSPINIT_CB_ID :
+ htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */
+ break;
+
+ case HAL_TIM_OC_MSPDEINIT_CB_ID :
+ htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_PWM_MSPINIT_CB_ID :
+ htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */
+ break;
+
+ case HAL_TIM_PWM_MSPDEINIT_CB_ID :
+ htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
+ htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
+ htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_ENCODER_MSPINIT_CB_ID :
+ htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */
+ break;
+
+ case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
+ htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
+ htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
+ htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */
+ break;
+
+ default :
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return status;
+}
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group10 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the TIM Base state
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM OC state
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM PWM state
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM Input Capture state
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM One Pulse Mode state
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM Encoder Mode state
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief TIM DMA error callback
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void HAL_TIM_DMAError(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->ErrorCallback(htim);
+#else
+ HAL_TIM_ErrorCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief TIM DMA Delay Pulse complete callback.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void HAL_TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->PWM_PulseFinishedCallback(htim);
+#else
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+/**
+ * @brief TIM DMA Capture complete callback.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void HAL_TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ }
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->IC_CaptureCallback(htim);
+#else
+ HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+
+}
+
+/**
+ * @brief TIM DMA Period Elapse complete callback.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->PeriodElapsedCallback(htim);
+#else
+ HAL_TIM_PeriodElapsedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief TIM DMA Trigger callback.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->TriggerCallback(htim);
+#else
+ HAL_TIM_TriggerCallback(htim);
+ #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief Time Base configuration
+ * @param TIMx TIM peripheral
+ * @param Structure pointer on TIM Time Base required parameters
+ * @retval None
+ */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure)
+{
+ uint32_t tmpcr1 = 0;
+ tmpcr1 = TIMx->CR1;
+
+ /* Set TIM Time Base Unit parameters ---------------------------------------*/
+ if(IS_TIM_CC3_INSTANCE(TIMx) != RESET)
+ {
+ /* Select the Counter Mode */
+ tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS);
+ tmpcr1 |= Structure->CounterMode;
+ }
+
+ if(IS_TIM_CC1_INSTANCE(TIMx) != RESET)
+ {
+ /* Set the clock division */
+ tmpcr1 &= ~TIM_CR1_CKD;
+ tmpcr1 |= (uint32_t)Structure->ClockDivision;
+ }
+
+ /* Set the auto-reload preload */
+ MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload);
+
+ TIMx->CR1 = tmpcr1;
+
+ /* Set the Auto-reload value */
+ TIMx->ARR = (uint32_t)Structure->Period ;
+
+ /* Set the Prescaler value */
+ TIMx->PSC = (uint32_t)Structure->Prescaler;
+
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ /* Set the Repetition Counter value */
+ TIMx->RCR = Structure->RepetitionCounter;
+ }
+
+ /* Generate an update event to reload the Prescaler
+ and the repetition counter(only for TIM1 and TIM8) value immediately */
+ TIMx->EGR = TIM_EGR_UG;
+}
+
+/**
+ * @brief Time Output Compare 1 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The output configuration structure
+ * @retval None
+ */
+void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0;
+ uint32_t tmpccer = 0;
+ uint32_t tmpcr2 = 0;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= ~TIM_CCMR1_OC1M;
+ tmpccmrx &= ~TIM_CCMR1_CC1S;
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC1P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= OC_Config->OCPolarity;
+
+
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC1NP;
+ /* Set the Output N Polarity */
+ tmpccer |= OC_Config->OCNPolarity;
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC1NE;
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS1;
+ tmpcr2 &= ~TIM_CR2_OIS1N;
+ /* Set the Output Idle state */
+ tmpcr2 |= OC_Config->OCIdleState;
+ /* Set the Output N Idle state */
+ tmpcr2 |= OC_Config->OCNIdleState;
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR1 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Output Compare 2 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The output configuration structure
+ * @retval None
+ */
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0;
+ uint32_t tmpccer = 0;
+ uint32_t tmpcr2 = 0;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR1_OC2M;
+ tmpccmrx &= ~TIM_CCMR1_CC2S;
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC2P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 4);
+
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC2NP;
+ /* Set the Output N Polarity */
+ tmpccer |= (OC_Config->OCNPolarity << 4);
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC2NE;
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS2;
+ tmpcr2 &= ~TIM_CR2_OIS2N;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 2);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (OC_Config->OCNIdleState << 2);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR2 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Output Compare 3 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The output configuration structure
+ * @retval None
+ */
+void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0;
+ uint32_t tmpccer = 0;
+ uint32_t tmpcr2 = 0;
+
+ /* Disable the Channel 3: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC3E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR2_OC3M;
+ tmpccmrx &= ~TIM_CCMR2_CC3S;
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC3P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 8);
+
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC3NP;
+ /* Set the Output N Polarity */
+ tmpccer |= (OC_Config->OCNPolarity << 8);
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC3NE;
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS3;
+ tmpcr2 &= ~TIM_CR2_OIS3N;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 4);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (OC_Config->OCNIdleState << 4);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR3 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Output Compare 4 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The output configuration structure
+ * @retval None
+ */
+void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0;
+ uint32_t tmpccer = 0;
+ uint32_t tmpcr2 = 0;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC4E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR2_OC4M;
+ tmpccmrx &= ~TIM_CCMR2_CC4S;
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC4P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 12);
+
+ /*if((TIMx == TIM1) || (TIMx == TIM8))*/
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS4;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 6);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR4 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Output Compare 4 configuration
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sSlaveConfig The slave configuration structure
+ * @retval None
+ */
+static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ uint32_t tmpsmcr = 0;
+ uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Reset the Trigger Selection Bits */
+ tmpsmcr &= ~TIM_SMCR_TS;
+ /* Set the Input Trigger source */
+ tmpsmcr |= sSlaveConfig->InputTrigger;
+
+ /* Reset the slave mode Bits */
+ tmpsmcr &= ~TIM_SMCR_SMS;
+ /* Set the slave mode */
+ tmpsmcr |= sSlaveConfig->SlaveMode;
+
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ /* Configure the trigger prescaler, filter, and polarity */
+ switch (sSlaveConfig->InputTrigger)
+ {
+ case TIM_TS_ETRF:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+ /* Configure the ETR Trigger source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sSlaveConfig->TriggerPrescaler,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_TI1F_ED:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ tmpccer = htim->Instance->CCER;
+ htim->Instance->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = htim->Instance->CCMR1;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ htim->Instance->CCMR1 = tmpccmr1;
+ htim->Instance->CCER = tmpccer;
+
+ }
+ break;
+
+ case TIM_TS_TI1FP1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI1 Filter and Polarity */
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_TI2FP2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI2 Filter and Polarity */
+ TIM_TI2_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_ITR0:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR1:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR2:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR3:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief Configure the TI1 as Input.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2.
+ * @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1
+ * (on channel2 path) is used as the input signal. Therefore CCMR1 must be
+ * protected against un-initialized filter and polarity values.
+ */
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ if(IS_TIM_CC2_INSTANCE(TIMx) != RESET)
+ {
+ tmpccmr1 &= ~TIM_CCMR1_CC1S;
+ tmpccmr1 |= TIM_ICSelection;
+ }
+ else
+ {
+ tmpccmr1 |= TIM_CCMR1_CC1S_0;
+ }
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= ((TIM_ICFilter << 4) & TIM_CCMR1_IC1F);
+
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+ tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP));
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the Polarity and Filter for TI1.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ tmpccer = TIMx->CCER;
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= (TIM_ICFilter << 4);
+
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+ tmpccer |= TIM_ICPolarity;
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI2 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1.
+ * @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2
+ * (on channel1 path) is used as the input signal. Therefore CCMR1 must be
+ * protected against un-initialized filter and polarity values.
+ */
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr1 &= ~TIM_CCMR1_CC2S;
+ tmpccmr1 |= (TIM_ICSelection << 8);
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC2F;
+ tmpccmr1 |= ((TIM_ICFilter << 12) & TIM_CCMR1_IC2F);
+
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+ tmpccer |= ((TIM_ICPolarity << 4) & (TIM_CCER_CC2P | TIM_CCER_CC2NP));
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the Polarity and Filter for TI2.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC2F;
+ tmpccmr1 |= (TIM_ICFilter << 12);
+
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+ tmpccer |= (TIM_ICPolarity << 4);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI3 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4.
+ * @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4
+ * (on channel1 path) is used as the input signal. Therefore CCMR2 must be
+ * protected against un-initialized filter and polarity values.
+ */
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr2 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Disable the Channel 3: Reset the CC3E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC3E;
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr2 &= ~TIM_CCMR2_CC3S;
+ tmpccmr2 |= TIM_ICSelection;
+
+ /* Set the filter */
+ tmpccmr2 &= ~TIM_CCMR2_IC3F;
+ tmpccmr2 |= ((TIM_ICFilter << 4) & TIM_CCMR2_IC3F);
+
+ /* Select the Polarity and set the CC3E Bit */
+ tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP);
+ tmpccer |= ((TIM_ICPolarity << 8) & (TIM_CCER_CC3P | TIM_CCER_CC3NP));
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI4 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3.
+ * @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3
+ * (on channel1 path) is used as the input signal. Therefore CCMR2 must be
+ * protected against un-initialized filter and polarity values.
+ */
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr2 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC4E;
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr2 &= ~TIM_CCMR2_CC4S;
+ tmpccmr2 |= (TIM_ICSelection << 8);
+
+ /* Set the filter */
+ tmpccmr2 &= ~TIM_CCMR2_IC4F;
+ tmpccmr2 |= ((TIM_ICFilter << 12) & TIM_CCMR2_IC4F);
+
+ /* Select the Polarity and set the CC4E Bit */
+ tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP);
+ tmpccer |= ((TIM_ICPolarity << 12) & (TIM_CCER_CC4P | TIM_CCER_CC4NP));
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer ;
+}
+
+/**
+ * @brief Selects the Input Trigger source
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ITRx The Input Trigger source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal Trigger 0
+ * @arg TIM_TS_ITR1: Internal Trigger 1
+ * @arg TIM_TS_ITR2: Internal Trigger 2
+ * @arg TIM_TS_ITR3: Internal Trigger 3
+ * @arg TIM_TS_TI1F_ED: TI1 Edge Detector
+ * @arg TIM_TS_TI1FP1: Filtered Timer Input 1
+ * @arg TIM_TS_TI2FP2: Filtered Timer Input 2
+ * @arg TIM_TS_ETRF: External Trigger input
+ * @retval None
+ */
+static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint16_t TIM_ITRx)
+{
+ uint32_t tmpsmcr = 0;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+ /* Reset the TS Bits */
+ tmpsmcr &= ~TIM_SMCR_TS;
+ /* Set the Input Trigger source and the slave mode*/
+ tmpsmcr |= TIM_ITRx | TIM_SLAVEMODE_EXTERNAL1;
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Configures the TIMx External Trigger (ETR).
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ExtTRGPrescaler The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPSC_DIV1: ETRP Prescaler OFF.
+ * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
+ * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
+ * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
+ * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
+ * @param ExtTRGFilter External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
+ uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter)
+{
+ uint32_t tmpsmcr = 0;
+
+ tmpsmcr = TIMx->SMCR;
+
+ /* Reset the ETR Bits */
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+
+ /* Set the Prescaler, the Filter value and the Polarity */
+ tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8)));
+
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel x.
+ * @param TIMx to select the TIM peripheral
+ * @param Channel specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @arg TIM_Channel_4: TIM Channel 4
+ * @param ChannelState specifies the TIM Channel CCxE bit new state.
+ * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_Disable.
+ * @retval None
+ */
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState)
+{
+ uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(TIMx));
+ assert_param(IS_TIM_CHANNELS(Channel));
+
+ tmp = TIM_CCER_CC1E << Channel;
+
+ /* Reset the CCxE Bit */
+ TIMx->CCER &= ~tmp;
+
+ /* Set or reset the CCxE Bit */
+ TIMx->CCER |= (uint32_t)(ChannelState << Channel);
+}
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+/**
+ * @brief Reset interrupt callbacks to the legacy week callbacks.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+void TIM_ResetCallback(TIM_HandleTypeDef *htim)
+{
+ /* Reset the TIM callback to the legacy weak callbacks */
+ htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak PeriodElapsedCallback */
+ htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak TriggerCallback */
+ htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC_CaptureCallback */
+ htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC_DelayElapsedCallback */
+ htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM_PulseFinishedCallback */
+ htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak ErrorCallback */
+ htim->CommutationCallback = HAL_TIMEx_CommutationCallback; /* Legacy weak CommutationCallback */
+ htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak BreakCallback */
+}
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c
new file mode 100644
index 00000000..4fdcc9ee
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c
@@ -0,0 +1,2599 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_tim_ex.c
+ * @author MCD Application Team
+ * @brief TIM HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Timer extension peripheral:
+ * + Time Hall Sensor Interface Initialization
+ * + Time Hall Sensor Interface Start
+ * + Time Complementary signal bread and dead time configuration
+ * + Time Master and Slave synchronization configuration
+ * + Time Output Compare/PWM Channel Configuration (for channels 5 and 6)
+ * + Time OCRef clear configuration
+ * + Timer remapping capabilities configuration
+ @verbatim
+ ==============================================================================
+ ##### TIMER Extended features #####
+ ==============================================================================
+ [..]
+ The Timer Extension features include:
+ (#) Complementary outputs with programmable dead-time for :
+ (++) Input Capture
+ (++) Output Compare
+ (++) PWM generation (Edge and Center-aligned Mode)
+ (++) One-pulse mode output
+ (#) Synchronization circuit to control the timer with external signals and to
+ interconnect several timers together.
+ (#) Break input to put the timer output signals in reset state or in a known state.
+ (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for
+ positioning purposes
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Initialize the TIM low level resources by implementing the following functions
+ depending from feature used :
+ (++) Complementary Output Compare : HAL_TIM_OC_MspInit()
+ (++) Complementary PWM generation : HAL_TIM_PWM_MspInit()
+ (++) Complementary One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+ (++) Hall Sensor output : HAL_TIM_HallSensor_MspInit()
+
+ (#) Initialize the TIM low level resources :
+ (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE();
+ (##) TIM pins configuration
+ (+++) Enable the clock for the TIM GPIOs using the following function:
+ __HAL_RCC_GPIOx_CLK_ENABLE();
+ (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+ (#) The external Clock can be configured, if needed (the default clock is the
+ internal clock from the APBx), using the following function:
+ HAL_TIM_ConfigClockSource, the clock configuration should be done before
+ any start function.
+
+ (#) Configure the TIM in the desired functioning mode using one of the
+ initialization function of this driver:
+ (++) HAL_TIMEx_HallSensor_Init and HAL_TIMEx_ConfigCommutationEvent: to use the
+ Timer Hall Sensor Interface and the commutation event with the corresponding
+ Interrupt and DMA request if needed (Note that One Timer is used to interface
+ with the Hall sensor Interface and another Timer should be used to use
+ the commutation event).
+
+ (#) Activate the TIM peripheral using one of the start functions:
+ (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OC_Start_IT()
+ (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT()
+ (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT()
+ (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT().
+
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup TIMEx TIMEx
+ * @brief TIM Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define BDTR_BKF_SHIFT (16)
+#define BDTR_BK2F_SHIFT (20)
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup TIMEx_Private_Functions
+ * @{
+ */
+static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState);
+static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+/**
+ * @}
+ */
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup TIMEx_Exported_Functions TIMEx Exported Functions
+ * @{
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
+ * @brief Timer Hall Sensor functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Hall Sensor functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure TIM HAL Sensor.
+ (+) De-initialize TIM HAL Sensor.
+ (+) Start the Hall Sensor Interface.
+ (+) Stop the Hall Sensor Interface.
+ (+) Start the Hall Sensor Interface and enable interrupts.
+ (+) Stop the Hall Sensor Interface and disable interrupts.
+ (+) Start the Hall Sensor Interface and enable DMA transfers.
+ (+) Stop the Hall Sensor Interface and disable DMA transfers.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Hall Sensor Interface and create the associated handle.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig TIM Hall Sensor configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig)
+{
+ TIM_OC_InitTypeDef OC_Config;
+
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy week callbacks */
+ TIM_ResetCallback(htim);
+
+ if(htim->HallSensor_MspInitCallback == NULL)
+ {
+ htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->HallSensor_MspInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIMEx_HallSensor_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Configure the Time base in the Encoder Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */
+ TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+ /* Set the IC1PSC value */
+ htim->Instance->CCMR1 |= sConfig->IC1Prescaler;
+
+ /* Enable the Hall sensor interface (XOR function of the three inputs) */
+ htim->Instance->CR2 |= TIM_CR2_TI1S;
+
+ /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI1F_ED;
+
+ /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_RESET;
+
+ /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/
+ OC_Config.OCFastMode = TIM_OCFAST_DISABLE;
+ OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET;
+ OC_Config.OCMode = TIM_OCMODE_PWM2;
+ OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+ OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+ OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH;
+ OC_Config.Pulse = sConfig->Commutation_Delay;
+
+ TIM_OC2_SetConfig(htim->Instance, &OC_Config);
+
+ /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2
+ register to 101 */
+ htim->Instance->CR2 &= ~TIM_CR2_MMS;
+ htim->Instance->CR2 |= TIM_TRGO_OC2REF;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Hall Sensor interface
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if(htim->HallSensor_MspDeInitCallback == NULL)
+ {
+ htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->HallSensor_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIMEx_HallSensor_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Hall Sensor MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Hall Sensor MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Enable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall sensor Interface.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1, 2 and 3
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Enable the capture compare Interrupts 1 event */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall Sensor Interface in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts event */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param pData The destination Buffer address.
+ * @param Length The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ /* Enable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Set the DMA Input Capture 1 Callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream for Capture 1*/
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
+
+ /* Enable the capture compare 1 Interrupt */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall Sensor Interface in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+
+ /* Disable the capture compare Interrupts 1 event */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
+ * @brief Timer Complementary Output Compare functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary Output Compare functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary Output Compare/PWM.
+ (+) Stop the Complementary Output Compare/PWM.
+ (+) Start the Complementary Output Compare/PWM and enable interrupts.
+ (+) Stop the Complementary Output Compare/PWM and disable interrupts.
+ (+) Start the Complementary Output Compare/PWM and enable DMA transfers.
+ (+) Stop the Complementary Output Compare/PWM and disable DMA transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the TIM Output Compare signal generation on the complementary
+ * output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation on the complementary
+ * output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in interrupt mode
+ * on the complementary output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the TIM Break interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in interrupt mode
+ * on the complementary output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the TIM Break interrupt (only if no more channel is active) */
+ tmpccer = htim->Instance->CCER;
+ if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
+ {
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+ }
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in DMA mode
+ * on the complementary output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+{
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in DMA mode
+ * on the complementary output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
+ * @brief Timer Complementary PWM functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary PWM functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary PWM.
+ (+) Stop the Complementary PWM.
+ (+) Start the Complementary PWM and enable interrupts.
+ (+) Stop the Complementary PWM and disable interrupts.
+ (+) Start the Complementary PWM and enable DMA transfers.
+ (+) Stop the Complementary PWM and disable DMA transfers.
+ (+) Start the Complementary Input Capture measurement.
+ (+) Stop the Complementary Input Capture.
+ (+) Start the Complementary Input Capture and enable interrupts.
+ (+) Stop the Complementary Input Capture and disable interrupts.
+ (+) Start the Complementary Input Capture and enable DMA transfers.
+ (+) Stop the Complementary Input Capture and disable DMA transfers.
+ (+) Start the Complementary One Pulse generation.
+ (+) Stop the Complementary One Pulse.
+ (+) Start the Complementary One Pulse and enable interrupts.
+ (+) Stop the Complementary One Pulse and disable interrupts.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the PWM signal generation on the complementary output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation on the complementary output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the PWM signal generation in interrupt mode on the
+ * complementary output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the TIM Break interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation in interrupt mode on the
+ * complementary output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the TIM Break interrupt (only if no more channel is active) */
+ tmpccer = htim->Instance->CCER;
+ if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
+ {
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+ }
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM PWM signal generation in DMA mode on the
+ * complementary output
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM PWM signal generation in DMA mode on the complementary
+ * output
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
+ * @brief Timer Complementary One Pulse functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary One Pulse functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary One Pulse generation.
+ (+) Stop the Complementary One Pulse.
+ (+) Start the Complementary One Pulse and enable interrupts.
+ (+) Stop the Complementary One Pulse and disable interrupts.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the TIM One Pulse signal generation on the complemetary
+ * output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Enable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation on the complementary
+ * output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Disable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation in interrupt mode on the
+ * complementary channel.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+ /* Enable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+
+/**
+ * @brief Stops the TIM One Pulse signal generation in interrupt mode on the
+ * complementary channel.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+ /* Disable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
+ (+) Configure External Clock source.
+ (+) Configure Complementary channels, break features and dead time.
+ (+) Configure Master and the Slave synchronization.
+ (+) Configure the commutation event in case of use of the Hall sensor interface.
+ (+) Configure the DMA Burst Mode.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Configure the TIM commutation event sequence.
+ * @note This function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource the Commutation Event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the TIM commutation event sequence with interrupt.
+ * @note This function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource the Commutation Event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ /* Enable the Commutation Interrupt Request */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM);
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the TIM commutation event sequence with DMA.
+ * @note This function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @note: The user should configure the DMA in his own software, in This function only the COMDE bit is set
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource the Commutation Event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ /* Enable the Commutation DMA Request */
+ /* Set the DMA Commutation Callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = HAL_TIMEx_DMACommutationCplt;
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = HAL_TIM_DMAError;
+
+ /* Enable the Commutation DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM);
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in master mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that
+ * contains the selected trigger output (TRGO) and the Master/Slave
+ * mode.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig)
+{
+ uint32_t tmpcr2;
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_SYNCHRO_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger));
+ assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = htim->Instance->CR2;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* If the timer supports ADC synchronization through TRGO2, set the master mode selection 2 */
+ if (IS_TIM_TRGO2_INSTANCE(htim->Instance))
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_TRGO2_SOURCE(sMasterConfig->MasterOutputTrigger2));
+
+ /* Clear the MMS2 bits */
+ tmpcr2 &= ~TIM_CR2_MMS2;
+ /* Select the TRGO2 source*/
+ tmpcr2 |= sMasterConfig->MasterOutputTrigger2;
+ }
+
+ /* Reset the MMS Bits */
+ tmpcr2 &= ~TIM_CR2_MMS;
+ /* Select the TRGO source */
+ tmpcr2 |= sMasterConfig->MasterOutputTrigger;
+
+ /* Reset the MSM Bit */
+ tmpsmcr &= ~TIM_SMCR_MSM;
+ /* Set master mode */
+ tmpsmcr |= sMasterConfig->MasterSlaveMode;
+
+ /* Update TIMx CR2 */
+ htim->Instance->CR2 = tmpcr2;
+
+ /* Update TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State
+ * and the AOE(automatic output enable).
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfig_TypeDef structure that
+ * contains the BDTR Register configuration information for the TIM peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
+ TIM_BreakDeadTimeConfigTypeDef * sBreakDeadTimeConfig)
+{
+ uint32_t tmpbdtr = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode));
+ assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode));
+ assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel));
+ assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime));
+ assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState));
+ assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity));
+ assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->BreakFilter));
+ assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput));
+ assert_param(IS_TIM_BREAK2_STATE(sBreakDeadTimeConfig->Break2State));
+ assert_param(IS_TIM_BREAK2_POLARITY(sBreakDeadTimeConfig->Break2Polarity));
+ assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->Break2Filter));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State,
+ the OSSI State, the dead time value and the Automatic Output Enable Bit */
+ /* Set the BDTR bits */
+ MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_MOE, sBreakDeadTimeConfig->AutomaticOutput);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BKF, (sBreakDeadTimeConfig->BreakFilter << BDTR_BKF_SHIFT));
+
+ if (IS_TIM_BKIN2_INSTANCE(htim->Instance))
+ {
+ assert_param(IS_TIM_BREAK2_STATE(sBreakDeadTimeConfig->Break2State));
+ assert_param(IS_TIM_BREAK2_POLARITY(sBreakDeadTimeConfig->Break2Polarity));
+ assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->Break2Filter));
+
+ /* Set the BREAK2 input related BDTR bits */
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BK2F, (sBreakDeadTimeConfig->Break2Filter << BDTR_BK2F_SHIFT));
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BK2E, sBreakDeadTimeConfig->Break2State);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BK2P, sBreakDeadTimeConfig->Break2Polarity);
+ }
+
+
+
+ /* Set TIMx_BDTR */
+ htim->Instance->BDTR = tmpbdtr;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+/**
+ * @brief Configures the break input source.
+ * @param htim TIM handle.
+ * @param BreakInput Break input to configure
+ * This parameter can be one of the following values:
+ * @arg TIM_BREAKINPUT_BRK: Timer break input
+ * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input
+ * @param sBreakInputConfig Break input source configuration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim,
+ uint32_t BreakInput,
+ TIMEx_BreakInputConfigTypeDef *sBreakInputConfig)
+
+{
+ uint32_t tmporx = 0;
+ uint32_t bkin_enable_mask = 0;
+ uint32_t bkin_polarity_mask = 0;
+ uint32_t bkin_enable_bitpos = 0;
+ uint32_t bkin_polarity_bitpos = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_BREAKINPUT(BreakInput));
+ assert_param(IS_TIM_BREAKINPUTSOURCE(sBreakInputConfig->Source));
+ assert_param(IS_TIM_BREAKINPUTSOURCE_STATE(sBreakInputConfig->Enable));
+ if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1)
+ {
+ assert_param(IS_TIM_BREAKINPUTSOURCE_POLARITY(sBreakInputConfig->Polarity));
+ }
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ switch(sBreakInputConfig->Source)
+ {
+ case TIM_BREAKINPUTSOURCE_BKIN:
+ {
+ bkin_enable_mask = TIM1_AF1_BKINE;
+ bkin_enable_bitpos = 0;
+ bkin_polarity_mask = TIM1_AF1_BKINP;
+ bkin_polarity_bitpos = 9;
+ }
+ break;
+
+ case TIM_BREAKINPUTSOURCE_DFSDM1:
+ {
+ bkin_enable_mask = TIM1_AF1_BKDF1BKE;
+ bkin_enable_bitpos = 8;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ switch(BreakInput)
+ {
+ case TIM_BREAKINPUT_BRK:
+ {
+ /* Get the TIMx_AF1 register value */
+ tmporx = htim->Instance->AF1;
+
+ /* Enable the break input */
+ tmporx &= ~bkin_enable_mask;
+ tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask;
+
+ if(sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1)
+ {
+ tmporx &= ~bkin_polarity_mask;
+ tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask;
+ }
+ /* Set TIMx_AF1 */
+ htim->Instance->AF1 = tmporx;
+ }
+ break;
+ case TIM_BREAKINPUT_BRK2:
+ {
+ /* Get the TIMx_AF2 register value */
+ tmporx = htim->Instance->AF2;
+
+ /* Enable the break input */
+ tmporx &= ~bkin_enable_mask;
+ tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask;
+
+ if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1)
+ {
+ tmporx &= ~bkin_polarity_mask;
+ tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask;
+ }
+
+ /* Set TIMx_AF2 */
+ htim->Instance->AF2 = tmporx;
+ }
+ break;
+ default:
+ break;
+ }
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @brief Configures the TIM2, TIM5 and TIM11 Remapping input capabilities.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Remap specifies the TIM input remapping source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TIM2_TIM8_TRGO: TIM2 ITR1 input is connected to TIM8 Trigger output(default)
+ * @arg TIM_TIM2_ETH_PTP: TIM2 ITR1 input is connected to ETH PTP trigger output.
+ * @arg TIM_TIM2_USBFS_SOF: TIM2 ITR1 input is connected to USB FS SOF.
+ * @arg TIM_TIM2_USBHS_SOF: TIM2 ITR1 input is connected to USB HS SOF.
+ * @arg TIM_TIM5_GPIO: TIM5 CH4 input is connected to dedicated Timer pin(default)
+ * @arg TIM_TIM5_LSI: TIM5 CH4 input is connected to LSI clock.
+ * @arg TIM_TIM5_LSE: TIM5 CH4 input is connected to LSE clock.
+ * @arg TIM_TIM5_RTC: TIM5 CH4 input is connected to RTC Output event.
+ * @arg TIM_TIM11_GPIO: TIM11 CH4 input is connected to dedicated Timer pin(default)
+ * @arg TIM_TIM11_SPDIF: SPDIF Frame synchronous
+ * @arg TIM_TIM11_HSE: TIM11 CH4 input is connected to HSE_RTC clock
+ * (HSE divided by a programmable prescaler)
+ * @arg TIM_TIM11_MCO1: TIM11 CH1 input is connected to MCO1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap)
+{
+ __HAL_LOCK(htim);
+
+ /* Check parameters */
+ assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_REMAP(Remap));
+
+ /* Set the Timer remapping configuration */
+ htim->Instance->OR = Remap;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Group channel 5 and channel 1, 2 or 3
+ * @param htim TIM handle.
+ * @param OCRef specifies the reference signal(s) the OC5REF is combined with.
+ * This parameter can be any combination of the following values:
+ * TIM_GROUPCH5_NONE: No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC
+ * TIM_GROUPCH5_OC1REFC: OC1REFC is the logical AND of OC1REFC and OC5REF
+ * TIM_GROUPCH5_OC2REFC: OC2REFC is the logical AND of OC2REFC and OC5REF
+ * TIM_GROUPCH5_OC3REFC: OC3REFC is the logical AND of OC3REFC and OC5REF
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t OCRef)
+{
+ /* Check parameters */
+ assert_param(IS_TIM_COMBINED3PHASEPWM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_GROUPCH5(OCRef));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Clear GC5Cx bit fields */
+ htim->Instance->CCR5 &= ~(TIM_CCR5_GC5C3|TIM_CCR5_GC5C2|TIM_CCR5_GC5C1);
+
+ /* Set GC5Cx bit fields */
+ htim->Instance->CCR5 |= OCRef;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
+ * @brief Extended Callbacks functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Extension Callbacks functions #####
+ ==============================================================================
+ [..]
+ This section provides Extension TIM callback functions:
+ (+) Timer Commutation callback
+ (+) Timer Break callback
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Hall commutation changed callback in non blocking mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_CommutationCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Hall Break detection callback in non blocking mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_BreakCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
+ * @brief Extended Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Extension Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the TIM Hall Sensor interface state
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief TIM DMA Commutation callback.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->CommutationCallback(htim);
+#else
+ HAL_TIMEx_CommutationCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+/**
+ * @}
+ */
+
+/**
+ * @brief Configures the OCRef clear feature
+ * @param htim TIM handle
+ * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that
+ * contains the OCREF clear feature and parameters for the TIM peripheral.
+ * @param Channel specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @arg TIM_Channel_4: TIM Channel 4
+ * @arg TIM_Channel_5: TIM Channel 5
+ * @arg TIM_Channel_6: TIM Channel 6
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim,
+ TIM_ClearInputConfigTypeDef *sClearInputConfig,
+ uint32_t Channel)
+{
+ uint32_t tmpsmcr = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ switch (sClearInputConfig->ClearInputSource)
+ {
+ case TIM_CLEARINPUTSOURCE_NONE:
+ {
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Clear the ETR Bits */
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+
+ /* Set TIMx_SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+ }
+ break;
+
+ case TIM_CLEARINPUTSOURCE_ETR:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
+ assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
+ assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
+
+ TIM_ETR_SetConfig(htim->Instance,
+ sClearInputConfig->ClearInputPrescaler,
+ sClearInputConfig->ClearInputPolarity,
+ sClearInputConfig->ClearInputFilter);
+ }
+ break;
+ default:
+ break;
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 2 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 2 */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_3:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 3 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 3 */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_4:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 4 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 4 */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_5:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR3 |= TIM_CCMR3_OC5CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_6:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR3 |= TIM_CCMR3_OC6CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6CE;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Output Compare Channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim TIM Output Compare handle
+ * @param sConfig TIM Output Compare configuration structure
+ * @param Channel TIM Channels to configure
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 1 in Output Compare */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 2 in Output Compare */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 3 in Output Compare */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 4 in Output Compare */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_5:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC5_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 5 in Output Compare */
+ TIM_OC5_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_6:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC6_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 6 in Output Compare */
+ TIM_OC6_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM PWM channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim TIM PWM handle
+ * @param sConfig TIM PWM configuration structure
+ * @param Channel TIM Channels to be configured
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim,
+ TIM_OC_InitTypeDef* sConfig,
+ uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+ assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 1 in PWM mode */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel1 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 2 in PWM mode */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel2 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode << 8;
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 3 in PWM mode */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel3 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 4 in PWM mode */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel4 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode << 8;
+ }
+ break;
+
+ case TIM_CHANNEL_5:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC5_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 5 in PWM mode */
+ TIM_OC5_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel5*/
+ htim->Instance->CCMR3 |= TIM_CCMR3_OC5PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE;
+ htim->Instance->CCMR3 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_6:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC6_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 5 in PWM mode */
+ TIM_OC6_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel6 */
+ htim->Instance->CCMR3 |= TIM_CCMR3_OC6PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE;
+ htim->Instance->CCMR3 |= sConfig->OCFastMode << 8;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel xN.
+ * @param TIMx to select the TIM peripheral
+ * @param Channel specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @param ChannelNState specifies the TIM Channel CCxNE bit new state.
+ * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable.
+ * @retval None
+ */
+static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState)
+{
+ uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_ADVANCED_INSTANCE(TIMx));
+ assert_param(IS_TIM_COMPLEMENTARY_CHANNELS(Channel));
+
+ tmp = TIM_CCER_CC1NE << Channel;
+
+ /* Reset the CCxNE Bit */
+ TIMx->CCER &= ~tmp;
+
+ /* Set or reset the CCxNE Bit */
+ TIMx->CCER |= (uint32_t)(ChannelNState << Channel);
+}
+
+/**
+ * @brief Timer Output Compare 5 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The output configuration structure
+ * @retval None
+ */
+static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0;
+ uint32_t tmpccer = 0;
+ uint32_t tmpcr2 = 0;
+
+ /* Disable the output: Reset the CCxE Bit */
+ TIMx->CCER &= ~TIM_CCER_CC5E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR3;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= ~(TIM_CCMR3_OC5M);
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC5P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 16);
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS5;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 8);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR3 */
+ TIMx->CCMR3 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR5 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Timer Output Compare 6 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The output configuration structure
+ * @retval None
+ */
+static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0;
+ uint32_t tmpccer = 0;
+ uint32_t tmpcr2 = 0;
+
+ /* Disable the output: Reset the CCxE Bit */
+ TIMx->CCER &= ~TIM_CCER_CC6E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR3;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= ~(TIM_CCMR3_OC6M);
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint32_t)~TIM_CCER_CC6P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 20);
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS6;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 10);
+ }
+
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR3 */
+ TIMx->CCMR3 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR6 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c
new file mode 100644
index 00000000..325bab36
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_dma.c
@@ -0,0 +1,462 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_ll_dma.c
+ * @author MCD Application Team
+ * @brief DMA LL module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_ll_dma.h"
+#include "stm32f7xx_ll_bus.h"
+#ifdef USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F7xx_LL_Driver
+ * @{
+ */
+
+#if defined (DMA1) || defined (DMA2)
+
+/** @defgroup DMA_LL DMA
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup DMA_LL_Private_Macros
+ * @{
+ */
+#define IS_LL_DMA_DIRECTION(__VALUE__) (((__VALUE__) == LL_DMA_DIRECTION_PERIPH_TO_MEMORY) || \
+ ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) || \
+ ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_MEMORY))
+
+#define IS_LL_DMA_MODE(__VALUE__) (((__VALUE__) == LL_DMA_MODE_NORMAL) || \
+ ((__VALUE__) == LL_DMA_MODE_CIRCULAR) || \
+ ((__VALUE__) == LL_DMA_MODE_PFCTRL))
+
+#define IS_LL_DMA_PERIPHINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_PERIPH_INCREMENT) || \
+ ((__VALUE__) == LL_DMA_PERIPH_NOINCREMENT))
+
+#define IS_LL_DMA_MEMORYINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_MEMORY_INCREMENT) || \
+ ((__VALUE__) == LL_DMA_MEMORY_NOINCREMENT))
+
+#define IS_LL_DMA_PERIPHDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_PDATAALIGN_BYTE) || \
+ ((__VALUE__) == LL_DMA_PDATAALIGN_HALFWORD) || \
+ ((__VALUE__) == LL_DMA_PDATAALIGN_WORD))
+
+#define IS_LL_DMA_MEMORYDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_MDATAALIGN_BYTE) || \
+ ((__VALUE__) == LL_DMA_MDATAALIGN_HALFWORD) || \
+ ((__VALUE__) == LL_DMA_MDATAALIGN_WORD))
+
+#define IS_LL_DMA_NBDATA(__VALUE__) ((__VALUE__) <= 0x0000FFFFU)
+
+#if defined(DMA_CHANNEL_SELECTION_8_15)
+#define IS_LL_DMA_CHANNEL(__VALUE__) (((__VALUE__) == LL_DMA_CHANNEL_0) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_1) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_2) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_3) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_4) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_5) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_6) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_7) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_8) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_9) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_10) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_11) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_12) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_13) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_14) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_15))
+
+#else
+#define IS_LL_DMA_CHANNEL(__VALUE__) (((__VALUE__) == LL_DMA_CHANNEL_0) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_1) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_2) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_3) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_4) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_5) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_6) || \
+ ((__VALUE__) == LL_DMA_CHANNEL_7))
+
+#endif /* DMA_CHANNEL_SELECTION_8_15 */
+
+#define IS_LL_DMA_PRIORITY(__VALUE__) (((__VALUE__) == LL_DMA_PRIORITY_LOW) || \
+ ((__VALUE__) == LL_DMA_PRIORITY_MEDIUM) || \
+ ((__VALUE__) == LL_DMA_PRIORITY_HIGH) || \
+ ((__VALUE__) == LL_DMA_PRIORITY_VERYHIGH))
+
+#define IS_LL_DMA_ALL_STREAM_INSTANCE(INSTANCE, STREAM) ((((INSTANCE) == DMA1) && \
+ (((STREAM) == LL_DMA_STREAM_0) || \
+ ((STREAM) == LL_DMA_STREAM_1) || \
+ ((STREAM) == LL_DMA_STREAM_2) || \
+ ((STREAM) == LL_DMA_STREAM_3) || \
+ ((STREAM) == LL_DMA_STREAM_4) || \
+ ((STREAM) == LL_DMA_STREAM_5) || \
+ ((STREAM) == LL_DMA_STREAM_6) || \
+ ((STREAM) == LL_DMA_STREAM_7) || \
+ ((STREAM) == LL_DMA_STREAM_ALL))) ||\
+ (((INSTANCE) == DMA2) && \
+ (((STREAM) == LL_DMA_STREAM_0) || \
+ ((STREAM) == LL_DMA_STREAM_1) || \
+ ((STREAM) == LL_DMA_STREAM_2) || \
+ ((STREAM) == LL_DMA_STREAM_3) || \
+ ((STREAM) == LL_DMA_STREAM_4) || \
+ ((STREAM) == LL_DMA_STREAM_5) || \
+ ((STREAM) == LL_DMA_STREAM_6) || \
+ ((STREAM) == LL_DMA_STREAM_7) || \
+ ((STREAM) == LL_DMA_STREAM_ALL))))
+
+#define IS_LL_DMA_FIFO_MODE_STATE(STATE) (((STATE) == LL_DMA_FIFOMODE_DISABLE ) || \
+ ((STATE) == LL_DMA_FIFOMODE_ENABLE))
+
+#define IS_LL_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == LL_DMA_FIFOTHRESHOLD_1_4) || \
+ ((THRESHOLD) == LL_DMA_FIFOTHRESHOLD_1_2) || \
+ ((THRESHOLD) == LL_DMA_FIFOTHRESHOLD_3_4) || \
+ ((THRESHOLD) == LL_DMA_FIFOTHRESHOLD_FULL))
+
+#define IS_LL_DMA_MEMORY_BURST(BURST) (((BURST) == LL_DMA_MBURST_SINGLE) || \
+ ((BURST) == LL_DMA_MBURST_INC4) || \
+ ((BURST) == LL_DMA_MBURST_INC8) || \
+ ((BURST) == LL_DMA_MBURST_INC16))
+
+#define IS_LL_DMA_PERIPHERAL_BURST(BURST) (((BURST) == LL_DMA_PBURST_SINGLE) || \
+ ((BURST) == LL_DMA_PBURST_INC4) || \
+ ((BURST) == LL_DMA_PBURST_INC8) || \
+ ((BURST) == LL_DMA_PBURST_INC16))
+
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DMA_LL_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DMA_LL_EF_Init
+ * @{
+ */
+
+/**
+ * @brief De-initialize the DMA registers to their default reset values.
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @arg @ref LL_DMA_STREAM_ALL
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: DMA registers are de-initialized
+ * - ERROR: DMA registers are not de-initialized
+ */
+uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Stream)
+{
+ DMA_Stream_TypeDef *tmp = (DMA_Stream_TypeDef *)DMA1_Stream0;
+ ErrorStatus status = SUCCESS;
+
+ /* Check the DMA Instance DMAx and Stream parameters*/
+ assert_param(IS_LL_DMA_ALL_STREAM_INSTANCE(DMAx, Stream));
+
+ if (Stream == LL_DMA_STREAM_ALL)
+ {
+ if (DMAx == DMA1)
+ {
+ /* Force reset of DMA clock */
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA1);
+
+ /* Release reset of DMA clock */
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA1);
+ }
+ else if (DMAx == DMA2)
+ {
+ /* Force reset of DMA clock */
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA2);
+
+ /* Release reset of DMA clock */
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA2);
+ }
+ else
+ {
+ status = ERROR;
+ }
+ }
+ else
+ {
+ /* Disable the selected Stream */
+ LL_DMA_DisableStream(DMAx,Stream);
+
+ /* Get the DMA Stream Instance */
+ tmp = (DMA_Stream_TypeDef *)(__LL_DMA_GET_STREAM_INSTANCE(DMAx, Stream));
+
+ /* Reset DMAx_Streamy configuration register */
+ LL_DMA_WriteReg(tmp, CR, 0U);
+
+ /* Reset DMAx_Streamy remaining bytes register */
+ LL_DMA_WriteReg(tmp, NDTR, 0U);
+
+ /* Reset DMAx_Streamy peripheral address register */
+ LL_DMA_WriteReg(tmp, PAR, 0U);
+
+ /* Reset DMAx_Streamy memory address register */
+ LL_DMA_WriteReg(tmp, M0AR, 0U);
+
+ /* Reset DMAx_Streamy memory address register */
+ LL_DMA_WriteReg(tmp, M1AR, 0U);
+
+ /* Reset DMAx_Streamy FIFO control register */
+ LL_DMA_WriteReg(tmp, FCR, 0x00000021U);
+
+ /* Reset Channel register field for DMAx Stream*/
+ LL_DMA_SetChannelSelection(DMAx, Stream, LL_DMA_CHANNEL_0);
+
+ if(Stream == LL_DMA_STREAM_0)
+ {
+ /* Reset the Stream0 pending flags */
+ DMAx->LIFCR = 0x0000003FU;
+ }
+ else if(Stream == LL_DMA_STREAM_1)
+ {
+ /* Reset the Stream1 pending flags */
+ DMAx->LIFCR = 0x00000F40U;
+ }
+ else if(Stream == LL_DMA_STREAM_2)
+ {
+ /* Reset the Stream2 pending flags */
+ DMAx->LIFCR = 0x003F0000U;
+ }
+ else if(Stream == LL_DMA_STREAM_3)
+ {
+ /* Reset the Stream3 pending flags */
+ DMAx->LIFCR = 0x0F400000U;
+ }
+ else if(Stream == LL_DMA_STREAM_4)
+ {
+ /* Reset the Stream4 pending flags */
+ DMAx->HIFCR = 0x0000003FU;
+ }
+ else if(Stream == LL_DMA_STREAM_5)
+ {
+ /* Reset the Stream5 pending flags */
+ DMAx->HIFCR = 0x00000F40U;
+ }
+ else if(Stream == LL_DMA_STREAM_6)
+ {
+ /* Reset the Stream6 pending flags */
+ DMAx->HIFCR = 0x003F0000U;
+ }
+ else if(Stream == LL_DMA_STREAM_7)
+ {
+ /* Reset the Stream7 pending flags */
+ DMAx->HIFCR = 0x0F400000U;
+ }
+ else
+ {
+ status = ERROR;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * @brief Initialize the DMA registers according to the specified parameters in DMA_InitStruct.
+ * @note To convert DMAx_Streamy Instance to DMAx Instance and Streamy, use helper macros :
+ * @arg @ref __LL_DMA_GET_INSTANCE
+ * @arg @ref __LL_DMA_GET_STREAM
+ * @param DMAx DMAx Instance
+ * @param Stream This parameter can be one of the following values:
+ * @arg @ref LL_DMA_STREAM_0
+ * @arg @ref LL_DMA_STREAM_1
+ * @arg @ref LL_DMA_STREAM_2
+ * @arg @ref LL_DMA_STREAM_3
+ * @arg @ref LL_DMA_STREAM_4
+ * @arg @ref LL_DMA_STREAM_5
+ * @arg @ref LL_DMA_STREAM_6
+ * @arg @ref LL_DMA_STREAM_7
+ * @param DMA_InitStruct pointer to a @ref LL_DMA_InitTypeDef structure.
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: DMA registers are initialized
+ * - ERROR: Not applicable
+ */
+uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Stream, LL_DMA_InitTypeDef *DMA_InitStruct)
+{
+ /* Check the DMA Instance DMAx and Stream parameters*/
+ assert_param(IS_LL_DMA_ALL_STREAM_INSTANCE(DMAx, Stream));
+
+ /* Check the DMA parameters from DMA_InitStruct */
+ assert_param(IS_LL_DMA_DIRECTION(DMA_InitStruct->Direction));
+ assert_param(IS_LL_DMA_MODE(DMA_InitStruct->Mode));
+ assert_param(IS_LL_DMA_PERIPHINCMODE(DMA_InitStruct->PeriphOrM2MSrcIncMode));
+ assert_param(IS_LL_DMA_MEMORYINCMODE(DMA_InitStruct->MemoryOrM2MDstIncMode));
+ assert_param(IS_LL_DMA_PERIPHDATASIZE(DMA_InitStruct->PeriphOrM2MSrcDataSize));
+ assert_param(IS_LL_DMA_MEMORYDATASIZE(DMA_InitStruct->MemoryOrM2MDstDataSize));
+ assert_param(IS_LL_DMA_NBDATA(DMA_InitStruct->NbData));
+ assert_param(IS_LL_DMA_CHANNEL(DMA_InitStruct->Channel));
+ assert_param(IS_LL_DMA_PRIORITY(DMA_InitStruct->Priority));
+ assert_param(IS_LL_DMA_FIFO_MODE_STATE(DMA_InitStruct->FIFOMode));
+ /* Check the memory burst, peripheral burst and FIFO threshold parameters only
+ when FIFO mode is enabled */
+ if(DMA_InitStruct->FIFOMode != LL_DMA_FIFOMODE_DISABLE)
+ {
+ assert_param(IS_LL_DMA_FIFO_THRESHOLD(DMA_InitStruct->FIFOThreshold));
+ assert_param(IS_LL_DMA_MEMORY_BURST(DMA_InitStruct->MemBurst));
+ assert_param(IS_LL_DMA_PERIPHERAL_BURST(DMA_InitStruct->PeriphBurst));
+ }
+
+ /*---------------------------- DMAx SxCR Configuration ------------------------
+ * Configure DMAx_Streamy: data transfer direction, data transfer mode,
+ * peripheral and memory increment mode,
+ * data size alignment and priority level with parameters :
+ * - Direction: DMA_SxCR_DIR[1:0] bits
+ * - Mode: DMA_SxCR_CIRC bit
+ * - PeriphOrM2MSrcIncMode: DMA_SxCR_PINC bit
+ * - MemoryOrM2MDstIncMode: DMA_SxCR_MINC bit
+ * - PeriphOrM2MSrcDataSize: DMA_SxCR_PSIZE[1:0] bits
+ * - MemoryOrM2MDstDataSize: DMA_SxCR_MSIZE[1:0] bits
+ * - Priority: DMA_SxCR_PL[1:0] bits
+ */
+ LL_DMA_ConfigTransfer(DMAx, Stream, DMA_InitStruct->Direction | \
+ DMA_InitStruct->Mode | \
+ DMA_InitStruct->PeriphOrM2MSrcIncMode | \
+ DMA_InitStruct->MemoryOrM2MDstIncMode | \
+ DMA_InitStruct->PeriphOrM2MSrcDataSize | \
+ DMA_InitStruct->MemoryOrM2MDstDataSize | \
+ DMA_InitStruct->Priority
+ );
+
+ if(DMA_InitStruct->FIFOMode != LL_DMA_FIFOMODE_DISABLE)
+ {
+ /*---------------------------- DMAx SxFCR Configuration ------------------------
+ * Configure DMAx_Streamy: fifo mode and fifo threshold with parameters :
+ * - FIFOMode: DMA_SxFCR_DMDIS bit
+ * - FIFOThreshold: DMA_SxFCR_FTH[1:0] bits
+ */
+ LL_DMA_ConfigFifo(DMAx, Stream, DMA_InitStruct->FIFOMode, DMA_InitStruct->FIFOThreshold);
+
+ /*---------------------------- DMAx SxCR Configuration --------------------------
+ * Configure DMAx_Streamy: memory burst transfer with parameters :
+ * - MemBurst: DMA_SxCR_MBURST[1:0] bits
+ */
+ LL_DMA_SetMemoryBurstxfer(DMAx,Stream,DMA_InitStruct->MemBurst);
+
+ /*---------------------------- DMAx SxCR Configuration --------------------------
+ * Configure DMAx_Streamy: peripheral burst transfer with parameters :
+ * - PeriphBurst: DMA_SxCR_PBURST[1:0] bits
+ */
+ LL_DMA_SetPeriphBurstxfer(DMAx,Stream,DMA_InitStruct->PeriphBurst);
+ }
+
+ /*-------------------------- DMAx SxM0AR Configuration --------------------------
+ * Configure the memory or destination base address with parameter :
+ * - MemoryOrM2MDstAddress: DMA_SxM0AR_M0A[31:0] bits
+ */
+ LL_DMA_SetMemoryAddress(DMAx, Stream, DMA_InitStruct->MemoryOrM2MDstAddress);
+
+ /*-------------------------- DMAx SxPAR Configuration ---------------------------
+ * Configure the peripheral or source base address with parameter :
+ * - PeriphOrM2MSrcAddress: DMA_SxPAR_PA[31:0] bits
+ */
+ LL_DMA_SetPeriphAddress(DMAx, Stream, DMA_InitStruct->PeriphOrM2MSrcAddress);
+
+ /*--------------------------- DMAx SxNDTR Configuration -------------------------
+ * Configure the peripheral base address with parameter :
+ * - NbData: DMA_SxNDT[15:0] bits
+ */
+ LL_DMA_SetDataLength(DMAx, Stream, DMA_InitStruct->NbData);
+
+ /*--------------------------- DMA SxCR_CHSEL Configuration ----------------------
+ * Configure the peripheral base address with parameter :
+ * - PeriphRequest: DMA_SxCR_CHSEL[3:0] bits
+ */
+ LL_DMA_SetChannelSelection(DMAx, Stream, DMA_InitStruct->Channel);
+
+ return SUCCESS;
+}
+
+/**
+ * @brief Set each @ref LL_DMA_InitTypeDef field to default value.
+ * @param DMA_InitStruct Pointer to a @ref LL_DMA_InitTypeDef structure.
+ * @retval None
+ */
+void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct)
+{
+ /* Set DMA_InitStruct fields to default values */
+ DMA_InitStruct->PeriphOrM2MSrcAddress = 0x00000000U;
+ DMA_InitStruct->MemoryOrM2MDstAddress = 0x00000000U;
+ DMA_InitStruct->Direction = LL_DMA_DIRECTION_PERIPH_TO_MEMORY;
+ DMA_InitStruct->Mode = LL_DMA_MODE_NORMAL;
+ DMA_InitStruct->PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT;
+ DMA_InitStruct->MemoryOrM2MDstIncMode = LL_DMA_MEMORY_NOINCREMENT;
+ DMA_InitStruct->PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_BYTE;
+ DMA_InitStruct->MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_BYTE;
+ DMA_InitStruct->NbData = 0x00000000U;
+ DMA_InitStruct->Channel = LL_DMA_CHANNEL_0;
+ DMA_InitStruct->Priority = LL_DMA_PRIORITY_LOW;
+ DMA_InitStruct->FIFOMode = LL_DMA_FIFOMODE_DISABLE;
+ DMA_InitStruct->FIFOThreshold = LL_DMA_FIFOTHRESHOLD_1_4;
+ DMA_InitStruct->MemBurst = LL_DMA_MBURST_SINGLE;
+ DMA_InitStruct->PeriphBurst = LL_DMA_PBURST_SINGLE;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* DMA1 || DMA2 */
+
+/**
+ * @}
+ */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c
new file mode 100644
index 00000000..4d58695e
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_exti.c
@@ -0,0 +1,230 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_ll_exti.c
+ * @author MCD Application Team
+ * @brief EXTI LL module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_ll_exti.h"
+#ifdef USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F7xx_LL_Driver
+ * @{
+ */
+
+#if defined (EXTI)
+
+/** @defgroup EXTI_LL EXTI
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup EXTI_LL_Private_Macros
+ * @{
+ */
+
+#define IS_LL_EXTI_LINE_0_31(__VALUE__) (((__VALUE__) & ~LL_EXTI_LINE_ALL_0_31) == 0x00000000U)
+
+#define IS_LL_EXTI_MODE(__VALUE__) (((__VALUE__) == LL_EXTI_MODE_IT) \
+ || ((__VALUE__) == LL_EXTI_MODE_EVENT) \
+ || ((__VALUE__) == LL_EXTI_MODE_IT_EVENT))
+
+
+#define IS_LL_EXTI_TRIGGER(__VALUE__) (((__VALUE__) == LL_EXTI_TRIGGER_NONE) \
+ || ((__VALUE__) == LL_EXTI_TRIGGER_RISING) \
+ || ((__VALUE__) == LL_EXTI_TRIGGER_FALLING) \
+ || ((__VALUE__) == LL_EXTI_TRIGGER_RISING_FALLING))
+
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup EXTI_LL_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup EXTI_LL_EF_Init
+ * @{
+ */
+
+/**
+ * @brief De-initialize the EXTI registers to their default reset values.
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: EXTI registers are de-initialized
+ * - ERROR: not applicable
+ */
+uint32_t LL_EXTI_DeInit(void)
+{
+ /* Interrupt mask register set to default reset values */
+ LL_EXTI_WriteReg(IMR, 0x00000000U);
+ /* Event mask register set to default reset values */
+ LL_EXTI_WriteReg(EMR, 0x00000000U);
+ /* Rising Trigger selection register set to default reset values */
+ LL_EXTI_WriteReg(RTSR, 0x00000000U);
+ /* Falling Trigger selection register set to default reset values */
+ LL_EXTI_WriteReg(FTSR, 0x00000000U);
+ /* Software interrupt event register set to default reset values */
+ LL_EXTI_WriteReg(SWIER, 0x00000000U);
+ /* Pending register set to default reset values */
+ LL_EXTI_WriteReg(PR, 0x01FFFFFFU);
+
+ return SUCCESS;
+}
+
+/**
+ * @brief Initialize the EXTI registers according to the specified parameters in EXTI_InitStruct.
+ * @param EXTI_InitStruct pointer to a @ref LL_EXTI_InitTypeDef structure.
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: EXTI registers are initialized
+ * - ERROR: not applicable
+ */
+uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct)
+{
+ ErrorStatus status = SUCCESS;
+ /* Check the parameters */
+ assert_param(IS_LL_EXTI_LINE_0_31(EXTI_InitStruct->Line_0_31));
+ assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->LineCommand));
+ assert_param(IS_LL_EXTI_MODE(EXTI_InitStruct->Mode));
+
+ /* ENABLE LineCommand */
+ if (EXTI_InitStruct->LineCommand != DISABLE)
+ {
+ assert_param(IS_LL_EXTI_TRIGGER(EXTI_InitStruct->Trigger));
+
+ /* Configure EXTI Lines in range from 0 to 31 */
+ if (EXTI_InitStruct->Line_0_31 != LL_EXTI_LINE_NONE)
+ {
+ switch (EXTI_InitStruct->Mode)
+ {
+ case LL_EXTI_MODE_IT:
+ /* First Disable Event on provided Lines */
+ LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31);
+ /* Then Enable IT on provided Lines */
+ LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31);
+ break;
+ case LL_EXTI_MODE_EVENT:
+ /* First Disable IT on provided Lines */
+ LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31);
+ /* Then Enable Event on provided Lines */
+ LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31);
+ break;
+ case LL_EXTI_MODE_IT_EVENT:
+ /* Directly Enable IT & Event on provided Lines */
+ LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31);
+ LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31);
+ break;
+ default:
+ status = ERROR;
+ break;
+ }
+ if (EXTI_InitStruct->Trigger != LL_EXTI_TRIGGER_NONE)
+ {
+ switch (EXTI_InitStruct->Trigger)
+ {
+ case LL_EXTI_TRIGGER_RISING:
+ /* First Disable Falling Trigger on provided Lines */
+ LL_EXTI_DisableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
+ /* Then Enable Rising Trigger on provided Lines */
+ LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
+ break;
+ case LL_EXTI_TRIGGER_FALLING:
+ /* First Disable Rising Trigger on provided Lines */
+ LL_EXTI_DisableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
+ /* Then Enable Falling Trigger on provided Lines */
+ LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
+ break;
+ case LL_EXTI_TRIGGER_RISING_FALLING:
+ LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
+ LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
+ break;
+ default:
+ status = ERROR;
+ break;
+ }
+ }
+ }
+ }
+ /* DISABLE LineCommand */
+ else
+ {
+ /* De-configure EXTI Lines in range from 0 to 31 */
+ LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31);
+ LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31);
+ }
+ return status;
+}
+
+/**
+ * @brief Set each @ref LL_EXTI_InitTypeDef field to default value.
+ * @param EXTI_InitStruct Pointer to a @ref LL_EXTI_InitTypeDef structure.
+ * @retval None
+ */
+void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct)
+{
+ EXTI_InitStruct->Line_0_31 = LL_EXTI_LINE_NONE;
+ EXTI_InitStruct->LineCommand = DISABLE;
+ EXTI_InitStruct->Mode = LL_EXTI_MODE_IT;
+ EXTI_InitStruct->Trigger = LL_EXTI_TRIGGER_FALLING;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined (EXTI) */
+
+/**
+ * @}
+ */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c
new file mode 100644
index 00000000..40080dbe
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_gpio.c
@@ -0,0 +1,323 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_ll_gpio.c
+ * @author MCD Application Team
+ * @brief GPIO LL module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_ll_gpio.h"
+#include "stm32f7xx_ll_bus.h"
+#ifdef USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F7xx_LL_Driver
+ * @{
+ */
+
+#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK)
+
+/** @addtogroup GPIO_LL
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup GPIO_LL_Private_Macros
+ * @{
+ */
+#define IS_LL_GPIO_PIN(__VALUE__) (((0x00000000U) < (__VALUE__)) && ((__VALUE__) <= (LL_GPIO_PIN_ALL)))
+
+#define IS_LL_GPIO_MODE(__VALUE__) (((__VALUE__) == LL_GPIO_MODE_INPUT) ||\
+ ((__VALUE__) == LL_GPIO_MODE_OUTPUT) ||\
+ ((__VALUE__) == LL_GPIO_MODE_ALTERNATE) ||\
+ ((__VALUE__) == LL_GPIO_MODE_ANALOG))
+
+#define IS_LL_GPIO_OUTPUT_TYPE(__VALUE__) (((__VALUE__) == LL_GPIO_OUTPUT_PUSHPULL) ||\
+ ((__VALUE__) == LL_GPIO_OUTPUT_OPENDRAIN))
+
+#define IS_LL_GPIO_SPEED(__VALUE__) (((__VALUE__) == LL_GPIO_SPEED_FREQ_LOW) ||\
+ ((__VALUE__) == LL_GPIO_SPEED_FREQ_MEDIUM) ||\
+ ((__VALUE__) == LL_GPIO_SPEED_FREQ_HIGH) ||\
+ ((__VALUE__) == LL_GPIO_SPEED_FREQ_VERY_HIGH))
+
+#define IS_LL_GPIO_PULL(__VALUE__) (((__VALUE__) == LL_GPIO_PULL_NO) ||\
+ ((__VALUE__) == LL_GPIO_PULL_UP) ||\
+ ((__VALUE__) == LL_GPIO_PULL_DOWN))
+
+#define IS_LL_GPIO_ALTERNATE(__VALUE__) (((__VALUE__) == LL_GPIO_AF_0 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_1 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_2 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_3 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_4 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_5 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_6 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_7 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_8 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_9 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_10 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_11 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_12 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_13 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_14 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_15 ))
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_LL_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup GPIO_LL_EF_Init
+ * @{
+ */
+
+/**
+ * @brief De-initialize GPIO registers (Registers restored to their default values).
+ * @param GPIOx GPIO Port
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: GPIO registers are de-initialized
+ * - ERROR: Wrong GPIO Port
+ */
+ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx)
+{
+ ErrorStatus status = SUCCESS;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+
+ /* Force and Release reset on clock of GPIOx Port */
+ if (GPIOx == GPIOA)
+ {
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOA);
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOA);
+ }
+ else if (GPIOx == GPIOB)
+ {
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOB);
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOB);
+ }
+ else if (GPIOx == GPIOC)
+ {
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOC);
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOC);
+ }
+#if defined(GPIOD)
+ else if (GPIOx == GPIOD)
+ {
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOD);
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOD);
+ }
+#endif /* GPIOD */
+#if defined(GPIOE)
+ else if (GPIOx == GPIOE)
+ {
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOE);
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOE);
+ }
+#endif /* GPIOE */
+#if defined(GPIOF)
+ else if (GPIOx == GPIOF)
+ {
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOF);
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOF);
+ }
+#endif /* GPIOF */
+#if defined(GPIOG)
+ else if (GPIOx == GPIOG)
+ {
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOG);
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOG);
+ }
+#endif /* GPIOG */
+#if defined(GPIOH)
+ else if (GPIOx == GPIOH)
+ {
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOH);
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOH);
+ }
+#endif /* GPIOH */
+#if defined(GPIOI)
+ else if (GPIOx == GPIOI)
+ {
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOI);
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOI);
+ }
+#endif /* GPIOI */
+#if defined(GPIOJ)
+ else if (GPIOx == GPIOJ)
+ {
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOJ);
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOJ);
+ }
+#endif /* GPIOJ */
+#if defined(GPIOK)
+ else if (GPIOx == GPIOK)
+ {
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOK);
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOK);
+ }
+#endif /* GPIOK */
+ else
+ {
+ status = ERROR;
+ }
+
+ return (status);
+}
+
+/**
+ * @brief Initialize GPIO registers according to the specified parameters in GPIO_InitStruct.
+ * @param GPIOx GPIO Port
+ * @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure
+ * that contains the configuration information for the specified GPIO peripheral.
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: GPIO registers are initialized according to GPIO_InitStruct content
+ * - ERROR: Not applicable
+ */
+ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct)
+{
+ uint32_t pinpos = 0x00000000U;
+ uint32_t currentpin = 0x00000000U;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+ assert_param(IS_LL_GPIO_PIN(GPIO_InitStruct->Pin));
+ assert_param(IS_LL_GPIO_MODE(GPIO_InitStruct->Mode));
+ assert_param(IS_LL_GPIO_PULL(GPIO_InitStruct->Pull));
+
+ /* ------------------------- Configure the port pins ---------------- */
+ /* Initialize pinpos on first pin set */
+ pinpos = POSITION_VAL(GPIO_InitStruct->Pin);
+
+ /* Configure the port pins */
+ while (((GPIO_InitStruct->Pin) >> pinpos) != 0x00000000U)
+ {
+ /* Get current io position */
+ currentpin = (GPIO_InitStruct->Pin) & (0x00000001U << pinpos);
+
+ if (currentpin)
+ {
+ /* Pin Mode configuration */
+ LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode);
+
+ if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE))
+ {
+ /* Check Speed mode parameters */
+ assert_param(IS_LL_GPIO_SPEED(GPIO_InitStruct->Speed));
+
+ /* Speed mode configuration */
+ LL_GPIO_SetPinSpeed(GPIOx, currentpin, GPIO_InitStruct->Speed);
+ }
+
+ /* Pull-up Pull down resistor configuration*/
+ LL_GPIO_SetPinPull(GPIOx, currentpin, GPIO_InitStruct->Pull);
+
+ if (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)
+ {
+ /* Check Alternate parameter */
+ assert_param(IS_LL_GPIO_ALTERNATE(GPIO_InitStruct->Alternate));
+
+ /* Speed mode configuration */
+ if (POSITION_VAL(currentpin) < 0x00000008U)
+ {
+ LL_GPIO_SetAFPin_0_7(GPIOx, currentpin, GPIO_InitStruct->Alternate);
+ }
+ else
+ {
+ LL_GPIO_SetAFPin_8_15(GPIOx, currentpin, GPIO_InitStruct->Alternate);
+ }
+ }
+ }
+ pinpos++;
+ }
+
+ if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE))
+ {
+ /* Check Output mode parameters */
+ assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType));
+
+ /* Output mode configuration*/
+ LL_GPIO_SetPinOutputType(GPIOx, GPIO_InitStruct->Pin, GPIO_InitStruct->OutputType);
+
+ }
+ return (SUCCESS);
+}
+
+/**
+ * @brief Set each @ref LL_GPIO_InitTypeDef field to default value.
+ * @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure
+ * whose fields will be set to default values.
+ * @retval None
+ */
+
+void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct)
+{
+ /* Reset GPIO init structure parameters values */
+ GPIO_InitStruct->Pin = LL_GPIO_PIN_ALL;
+ GPIO_InitStruct->Mode = LL_GPIO_MODE_ANALOG;
+ GPIO_InitStruct->Speed = LL_GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct->OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+ GPIO_InitStruct->Pull = LL_GPIO_PULL_NO;
+ GPIO_InitStruct->Alternate = LL_GPIO_AF_0;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK) */
+
+/**
+ * @}
+ */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c
new file mode 100644
index 00000000..43aed1fa
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_rcc.c
@@ -0,0 +1,1593 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_ll_rcc.c
+ * @author MCD Application Team
+ * @brief RCC LL module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_ll_rcc.h"
+#ifdef USE_FULL_ASSERT
+ #include "stm32_assert.h"
+#else
+ #define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F7xx_LL_Driver
+ * @{
+ */
+
+#if defined(RCC)
+
+/** @addtogroup RCC_LL
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup RCC_LL_Private_Macros
+ * @{
+ */
+#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_USART2_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_USART3_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_USART6_CLKSOURCE))
+
+#define IS_LL_RCC_UART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_UART4_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_UART5_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_UART7_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_UART8_CLKSOURCE))
+
+#if defined(I2C4)
+#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2C1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_I2C2_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_I2C3_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_I2C4_CLKSOURCE))
+#else
+#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2C1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_I2C2_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_I2C3_CLKSOURCE))
+#endif /* I2C4 */
+
+#define IS_LL_RCC_LPTIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_LPTIM1_CLKSOURCE))
+
+#define IS_LL_RCC_SAI_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_SAI1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_SAI2_CLKSOURCE))
+
+#if defined(SDMMC2)
+#define IS_LL_RCC_SDMMC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_SDMMC1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_SDMMC2_CLKSOURCE))
+#else
+#define IS_LL_RCC_SDMMC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_SDMMC1_CLKSOURCE))
+#endif /* SDMMC2 */
+
+#define IS_LL_RCC_RNG_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_RNG_CLKSOURCE))
+
+#define IS_LL_RCC_USB_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USB_CLKSOURCE))
+
+#if defined(DFSDM1_Channel0)
+#define IS_LL_RCC_DFSDM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_DFSDM1_CLKSOURCE))
+
+#define IS_LL_RCC_DFSDM_AUDIO_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_DFSDM1_AUDIO_CLKSOURCE))
+#endif /* DFSDM1_Channel0 */
+
+#define IS_LL_RCC_I2S_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2S1_CLKSOURCE))
+
+#if defined(CEC)
+#define IS_LL_RCC_CEC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_CEC_CLKSOURCE))
+#endif /* CEC */
+
+#if defined(DSI)
+#define IS_LL_RCC_DSI_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_DSI_CLKSOURCE))
+#endif /* DSI */
+
+#if defined(LTDC)
+#define IS_LL_RCC_LTDC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_LTDC_CLKSOURCE))
+#endif /* LTDC */
+
+#if defined(SPDIFRX)
+#define IS_LL_RCC_SPDIFRX_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_SPDIFRX1_CLKSOURCE))
+#endif /* SPDIFRX */
+
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup RCC_LL_Private_Functions RCC Private functions
+ * @{
+ */
+uint32_t RCC_GetSystemClockFreq(void);
+uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency);
+uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency);
+uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency);
+uint32_t RCC_PLL_GetFreqDomain_SYS(void);
+uint32_t RCC_PLL_GetFreqDomain_SAI(void);
+uint32_t RCC_PLL_GetFreqDomain_48M(void);
+#if defined(DSI)
+uint32_t RCC_PLL_GetFreqDomain_DSI(void);
+#endif /* DSI */
+uint32_t RCC_PLLSAI_GetFreqDomain_SAI(void);
+uint32_t RCC_PLLSAI_GetFreqDomain_48M(void);
+#if defined(LTDC)
+uint32_t RCC_PLLSAI_GetFreqDomain_LTDC(void);
+#endif /* LTDC */
+uint32_t RCC_PLLI2S_GetFreqDomain_I2S(void);
+uint32_t RCC_PLLI2S_GetFreqDomain_SAI(void);
+#if defined(SPDIFRX)
+uint32_t RCC_PLLI2S_GetFreqDomain_SPDIFRX(void);
+#endif /* SPDIFRX */
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCC_LL_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCC_LL_EF_Init
+ * @{
+ */
+
+/**
+ * @brief Reset the RCC clock configuration to the default reset state.
+ * @note The default reset state of the clock configuration is given below:
+ * - HSI ON and used as system clock source
+ * - HSE, PLL, PLLI2S, PLLSAI OFF
+ * - AHB, APB1 and APB2 prescaler set to 1.
+ * - CSS, MCO OFF
+ * - All interrupts disabled
+ * @note This function doesn't modify the configuration of the
+ * - Peripheral clocks
+ * - LSI, LSE and RTC clocks
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: RCC registers are de-initialized
+ * - ERROR: not applicable
+ */
+ErrorStatus LL_RCC_DeInit(void)
+{
+ uint32_t vl_mask = 0xFFFFFFFFU;
+
+ /* Set HSION bit */
+ LL_RCC_HSI_Enable();
+
+ /* Wait for HSI READY bit */
+ while(LL_RCC_HSI_IsReady() != 1U)
+ {}
+
+ /* Reset CFGR register */
+ LL_RCC_WriteReg(CFGR, 0x00000000U);
+
+ /* Reset HSEON, HSEBYP, PLLON, CSSON, PLLI2SON and PLLSAION bits */
+ CLEAR_BIT(vl_mask, (RCC_CR_HSEON | RCC_CR_HSEBYP | RCC_CR_PLLON | RCC_CR_CSSON | RCC_CR_PLLSAION | RCC_CR_PLLI2SON));
+
+ /* Write new mask in CR register */
+ LL_RCC_WriteReg(CR, vl_mask);
+
+ /* Set HSITRIM bits to the reset value*/
+ LL_RCC_HSI_SetCalibTrimming(0x10U);
+
+ /* Wait for PLL READY bit to be reset */
+ while(LL_RCC_PLL_IsReady() != 0U)
+ {}
+
+ /* Wait for PLLI2S READY bit to be reset */
+ while(LL_RCC_PLLI2S_IsReady() != 0U)
+ {}
+
+ /* Wait for PLLSAI READY bit to be reset */
+ while(LL_RCC_PLLSAI_IsReady() != 0U)
+ {}
+
+ /* Reset PLLCFGR register */
+ LL_RCC_WriteReg(PLLCFGR, 0x24003010U);
+
+ /* Reset PLLI2SCFGR register */
+ LL_RCC_WriteReg(PLLI2SCFGR, 0x24003000U);
+
+ /* Reset PLLSAICFGR register */
+ LL_RCC_WriteReg(PLLSAICFGR, 0x24003000U);
+
+ /* Disable all interrupts */
+ CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE | RCC_CIR_LSERDYIE | RCC_CIR_HSIRDYIE | RCC_CIR_HSERDYIE | RCC_CIR_PLLRDYIE | RCC_CIR_PLLI2SRDYIE | RCC_CIR_PLLSAIRDYIE);
+
+ /* Clear all interrupt flags */
+ SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC | RCC_CIR_LSERDYC | RCC_CIR_HSIRDYC | RCC_CIR_HSERDYC | RCC_CIR_PLLRDYC | RCC_CIR_PLLI2SRDYC | RCC_CIR_PLLSAIRDYC | RCC_CIR_CSSC);
+
+ /* Clear LSION bit */
+ CLEAR_BIT(RCC->CSR, RCC_CSR_LSION);
+
+ /* Reset all CSR flags */
+ SET_BIT(RCC->CSR, RCC_CSR_RMVF);
+
+ return SUCCESS;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_LL_EF_Get_Freq
+ * @brief Return the frequencies of different on chip clocks; System, AHB, APB1 and APB2 buses clocks
+ * and different peripheral clocks available on the device.
+ * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(**)
+ * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(***)
+ * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(***)
+ * or HSI_VALUE(**) multiplied/divided by the PLL factors.
+ * @note (**) HSI_VALUE is a constant defined in this file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ * @note (***) HSE_VALUE is a constant defined in this file (default value
+ * 25 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ * @note The result of this function could be incorrect when using fractional
+ * value for HSE crystal.
+ * @note This function can be used by the user application to compute the
+ * baud-rate for the communication peripherals or configure other parameters.
+ * @{
+ */
+
+/**
+ * @brief Return the frequencies of different on chip clocks; System, AHB, APB1 and APB2 buses clocks
+ * @note Each time SYSCLK, HCLK, PCLK1 and/or PCLK2 clock changes, this function
+ * must be called to update structure fields. Otherwise, any
+ * configuration based on this function will be incorrect.
+ * @param RCC_Clocks pointer to a @ref LL_RCC_ClocksTypeDef structure which will hold the clocks frequencies
+ * @retval None
+ */
+void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks)
+{
+ /* Get SYSCLK frequency */
+ RCC_Clocks->SYSCLK_Frequency = RCC_GetSystemClockFreq();
+
+ /* HCLK clock frequency */
+ RCC_Clocks->HCLK_Frequency = RCC_GetHCLKClockFreq(RCC_Clocks->SYSCLK_Frequency);
+
+ /* PCLK1 clock frequency */
+ RCC_Clocks->PCLK1_Frequency = RCC_GetPCLK1ClockFreq(RCC_Clocks->HCLK_Frequency);
+
+ /* PCLK2 clock frequency */
+ RCC_Clocks->PCLK2_Frequency = RCC_GetPCLK2ClockFreq(RCC_Clocks->HCLK_Frequency);
+}
+
+/**
+ * @brief Return USARTx clock frequency
+ * @param USARTxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USART1_CLKSOURCE
+ * @arg @ref LL_RCC_USART2_CLKSOURCE
+ * @arg @ref LL_RCC_USART3_CLKSOURCE
+ * @arg @ref LL_RCC_USART6_CLKSOURCE
+ * @retval USART clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready
+ */
+uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource)
+{
+ uint32_t usart_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_USART_CLKSOURCE(USARTxSource));
+
+ if (USARTxSource == LL_RCC_USART1_CLKSOURCE)
+ {
+ /* USART1CLK clock frequency */
+ switch (LL_RCC_GetUSARTClockSource(USARTxSource))
+ {
+ case LL_RCC_USART1_CLKSOURCE_SYSCLK: /* USART1 Clock is System Clock */
+ usart_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_USART1_CLKSOURCE_HSI: /* USART1 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ usart_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_USART1_CLKSOURCE_LSE: /* USART1 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ usart_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_USART1_CLKSOURCE_PCLK2: /* USART1 Clock is PCLK2 */
+ default:
+ usart_frequency = RCC_GetPCLK2ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+ else if (USARTxSource == LL_RCC_USART2_CLKSOURCE)
+ {
+ /* USART2CLK clock frequency */
+ switch (LL_RCC_GetUSARTClockSource(USARTxSource))
+ {
+ case LL_RCC_USART2_CLKSOURCE_SYSCLK: /* USART2 Clock is System Clock */
+ usart_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_USART2_CLKSOURCE_HSI: /* USART2 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ usart_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_USART2_CLKSOURCE_LSE: /* USART2 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ usart_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_USART2_CLKSOURCE_PCLK1: /* USART2 Clock is PCLK1 */
+ default:
+ usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+ else if (USARTxSource == LL_RCC_USART6_CLKSOURCE)
+ {
+ /* USART6CLK clock frequency */
+ switch (LL_RCC_GetUSARTClockSource(USARTxSource))
+ {
+ case LL_RCC_USART6_CLKSOURCE_SYSCLK: /* USART6 Clock is System Clock */
+ usart_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_USART6_CLKSOURCE_HSI: /* USART6 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ usart_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_USART6_CLKSOURCE_LSE: /* USART6 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ usart_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_USART6_CLKSOURCE_PCLK2: /* USART6 Clock is PCLK2 */
+ default:
+ usart_frequency = RCC_GetPCLK2ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+ else
+ {
+ if (USARTxSource == LL_RCC_USART3_CLKSOURCE)
+ {
+ /* USART3CLK clock frequency */
+ switch (LL_RCC_GetUSARTClockSource(USARTxSource))
+ {
+ case LL_RCC_USART3_CLKSOURCE_SYSCLK: /* USART3 Clock is System Clock */
+ usart_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_USART3_CLKSOURCE_HSI: /* USART3 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ usart_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_USART3_CLKSOURCE_LSE: /* USART3 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ usart_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_USART3_CLKSOURCE_PCLK1: /* USART3 Clock is PCLK1 */
+ default:
+ usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+ }
+ return usart_frequency;
+}
+
+/**
+ * @brief Return UARTx clock frequency
+ * @param UARTxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_UART4_CLKSOURCE
+ * @arg @ref LL_RCC_UART5_CLKSOURCE
+ * @arg @ref LL_RCC_UART7_CLKSOURCE
+ * @arg @ref LL_RCC_UART8_CLKSOURCE
+ * @retval UART clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready
+ */
+uint32_t LL_RCC_GetUARTClockFreq(uint32_t UARTxSource)
+{
+ uint32_t uart_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_UART_CLKSOURCE(UARTxSource));
+
+ if (UARTxSource == LL_RCC_UART4_CLKSOURCE)
+ {
+ /* UART4CLK clock frequency */
+ switch (LL_RCC_GetUARTClockSource(UARTxSource))
+ {
+ case LL_RCC_UART4_CLKSOURCE_SYSCLK: /* UART4 Clock is System Clock */
+ uart_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_UART4_CLKSOURCE_HSI: /* UART4 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ uart_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_UART4_CLKSOURCE_LSE: /* UART4 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ uart_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_UART4_CLKSOURCE_PCLK1: /* UART4 Clock is PCLK1 */
+ default:
+ uart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+ else if (UARTxSource == LL_RCC_UART5_CLKSOURCE)
+ {
+ /* UART5CLK clock frequency */
+ switch (LL_RCC_GetUARTClockSource(UARTxSource))
+ {
+ case LL_RCC_UART5_CLKSOURCE_SYSCLK: /* UART5 Clock is System Clock */
+ uart_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_UART5_CLKSOURCE_HSI: /* UART5 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ uart_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_UART5_CLKSOURCE_LSE: /* UART5 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ uart_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_UART5_CLKSOURCE_PCLK1: /* UART5 Clock is PCLK1 */
+ default:
+ uart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+ else if (UARTxSource == LL_RCC_UART7_CLKSOURCE)
+ {
+ /* UART7CLK clock frequency */
+ switch (LL_RCC_GetUARTClockSource(UARTxSource))
+ {
+ case LL_RCC_UART7_CLKSOURCE_SYSCLK: /* UART7 Clock is System Clock */
+ uart_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_UART7_CLKSOURCE_HSI: /* UART7 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ uart_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_UART7_CLKSOURCE_LSE: /* UART7 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ uart_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_UART7_CLKSOURCE_PCLK1: /* UART7 Clock is PCLK1 */
+ default:
+ uart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+ else
+ {
+ if (UARTxSource == LL_RCC_UART8_CLKSOURCE)
+ {
+ /* UART8CLK clock frequency */
+ switch (LL_RCC_GetUARTClockSource(UARTxSource))
+ {
+ case LL_RCC_UART8_CLKSOURCE_SYSCLK: /* UART8 Clock is System Clock */
+ uart_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_UART8_CLKSOURCE_HSI: /* UART8 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ uart_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_UART8_CLKSOURCE_LSE: /* UART8 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ uart_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_UART8_CLKSOURCE_PCLK1: /* UART8 Clock is PCLK1 */
+ default:
+ uart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+ }
+ return uart_frequency;
+}
+
+/**
+ * @brief Return I2Cx clock frequency
+ * @param I2CxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE
+ * @arg @ref LL_RCC_I2C4_CLKSOURCE (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval I2C clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that HSI oscillator is not ready
+ */
+uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource)
+{
+ uint32_t i2c_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_I2C_CLKSOURCE(I2CxSource));
+
+ if (I2CxSource == LL_RCC_I2C1_CLKSOURCE)
+ {
+ /* I2C1 CLK clock frequency */
+ switch (LL_RCC_GetI2CClockSource(I2CxSource))
+ {
+ case LL_RCC_I2C1_CLKSOURCE_SYSCLK: /* I2C1 Clock is System Clock */
+ i2c_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_I2C1_CLKSOURCE_HSI: /* I2C1 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ i2c_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_I2C1_CLKSOURCE_PCLK1: /* I2C1 Clock is PCLK1 */
+ default:
+ i2c_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+ else if (I2CxSource == LL_RCC_I2C2_CLKSOURCE)
+ {
+ /* I2C2 CLK clock frequency */
+ switch (LL_RCC_GetI2CClockSource(I2CxSource))
+ {
+ case LL_RCC_I2C2_CLKSOURCE_SYSCLK: /* I2C2 Clock is System Clock */
+ i2c_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_I2C2_CLKSOURCE_HSI: /* I2C2 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ i2c_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_I2C2_CLKSOURCE_PCLK1: /* I2C2 Clock is PCLK1 */
+ default:
+ i2c_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+ else if (I2CxSource == LL_RCC_I2C3_CLKSOURCE)
+ {
+ /* I2C3 CLK clock frequency */
+ switch (LL_RCC_GetI2CClockSource(I2CxSource))
+ {
+ case LL_RCC_I2C3_CLKSOURCE_SYSCLK: /* I2C3 Clock is System Clock */
+ i2c_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_I2C3_CLKSOURCE_HSI: /* I2C3 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ i2c_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_I2C3_CLKSOURCE_PCLK1: /* I2C3 Clock is PCLK1 */
+ default:
+ i2c_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+#if defined(I2C4)
+ else
+ {
+ if (I2CxSource == LL_RCC_I2C4_CLKSOURCE)
+ {
+ /* I2C4 CLK clock frequency */
+ switch (LL_RCC_GetI2CClockSource(I2CxSource))
+ {
+ case LL_RCC_I2C4_CLKSOURCE_SYSCLK: /* I2C4 Clock is System Clock */
+ i2c_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_I2C4_CLKSOURCE_HSI: /* I2C4 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ i2c_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_I2C4_CLKSOURCE_PCLK1: /* I2C4 Clock is PCLK1 */
+ default:
+ i2c_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+ }
+#endif /* I2C4 */
+
+ return i2c_frequency;
+}
+
+/**
+ * @brief Return I2Sx clock frequency
+ * @param I2SxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_I2S1_CLKSOURCE
+ * @retval I2S clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that PLLI2S oscillator is not ready
+ */
+uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource)
+{
+ uint32_t i2s_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_I2S_CLKSOURCE(I2SxSource));
+
+ if (I2SxSource == LL_RCC_I2S1_CLKSOURCE)
+ {
+ /* I2S1 CLK clock frequency */
+ switch (LL_RCC_GetI2SClockSource(I2SxSource))
+ {
+ case LL_RCC_I2S1_CLKSOURCE_PLLI2S: /* I2S1 Clock is PLLI2S */
+ if (LL_RCC_PLLI2S_IsReady())
+ {
+ i2s_frequency = RCC_PLLI2S_GetFreqDomain_I2S();
+ }
+ break;
+
+ case LL_RCC_I2S1_CLKSOURCE_PIN: /* I2S1 Clock is External clock */
+ default:
+ i2s_frequency = EXTERNAL_CLOCK_VALUE;
+ break;
+ }
+ }
+
+ return i2s_frequency;
+}
+
+/**
+ * @brief Return LPTIMx clock frequency
+ * @param LPTIMxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE
+ * @retval LPTIM clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI, LSI or LSE) is not ready
+ */
+uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource)
+{
+ uint32_t lptim_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_LPTIM_CLKSOURCE(LPTIMxSource));
+
+ if (LPTIMxSource == LL_RCC_LPTIM1_CLKSOURCE)
+ {
+ /* LPTIM1CLK clock frequency */
+ switch (LL_RCC_GetLPTIMClockSource(LPTIMxSource))
+ {
+ case LL_RCC_LPTIM1_CLKSOURCE_LSI: /* LPTIM1 Clock is LSI Osc. */
+ if (LL_RCC_LSI_IsReady())
+ {
+ lptim_frequency = LSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_LPTIM1_CLKSOURCE_HSI: /* LPTIM1 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ lptim_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_LPTIM1_CLKSOURCE_LSE: /* LPTIM1 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ lptim_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_LPTIM1_CLKSOURCE_PCLK1: /* LPTIM1 Clock is PCLK1 */
+ default:
+ lptim_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+
+ return lptim_frequency;
+}
+
+/**
+ * @brief Return SAIx clock frequency
+ * @param SAIxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE
+ * @retval SAI clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that PLL is not ready
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that external clock is used
+ */
+uint32_t LL_RCC_GetSAIClockFreq(uint32_t SAIxSource)
+{
+ uint32_t sai_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_SAI_CLKSOURCE(SAIxSource));
+
+ if (SAIxSource == LL_RCC_SAI1_CLKSOURCE)
+ {
+ /* SAI1CLK clock frequency */
+ switch (LL_RCC_GetSAIClockSource(SAIxSource))
+ {
+ case LL_RCC_SAI1_CLKSOURCE_PLLSAI: /* PLLSAI clock used as SAI1 clock source */
+ if (LL_RCC_PLLSAI_IsReady())
+ {
+ sai_frequency = RCC_PLLSAI_GetFreqDomain_SAI();
+ }
+ break;
+
+ case LL_RCC_SAI1_CLKSOURCE_PLLI2S: /* PLLI2S clock used as SAI1 clock source */
+ if (LL_RCC_PLLI2S_IsReady())
+ {
+ sai_frequency = RCC_PLLI2S_GetFreqDomain_SAI();
+ }
+ break;
+
+#if defined(RCC_SAI1SEL_PLLSRC_SUPPORT)
+ case LL_RCC_SAI1_CLKSOURCE_PLLSRC:
+ switch (LL_RCC_PLL_GetMainSource())
+ {
+ case LL_RCC_PLLSOURCE_HSE: /* HSE clock used as SAI1 clock source */
+ if (LL_RCC_HSE_IsReady())
+ {
+ sai_frequency = HSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_PLLSOURCE_HSI: /* HSI clock used as SAI1 clock source */
+ default:
+ if (LL_RCC_HSI_IsReady())
+ {
+ sai_frequency = HSI_VALUE;
+ }
+ break;
+ }
+ break;
+#endif /* RCC_SAI1SEL_PLLSRC_SUPPORT */
+ case LL_RCC_SAI1_CLKSOURCE_PIN: /* External input clock used as SAI1 clock source */
+ default:
+ sai_frequency = LL_RCC_PERIPH_FREQUENCY_NA;
+ break;
+ }
+ }
+ else
+ {
+ if (SAIxSource == LL_RCC_SAI2_CLKSOURCE)
+ {
+ /* SAI2CLK clock frequency */
+ switch (LL_RCC_GetSAIClockSource(SAIxSource))
+ {
+ case LL_RCC_SAI2_CLKSOURCE_PLLSAI: /* PLLSAI clock used as SAI2 clock source */
+ if (LL_RCC_PLLSAI_IsReady())
+ {
+ sai_frequency = RCC_PLLSAI_GetFreqDomain_SAI();
+ }
+ break;
+
+ case LL_RCC_SAI2_CLKSOURCE_PLLI2S: /* PLLI2S clock used as SAI2 clock source */
+ if (LL_RCC_PLLI2S_IsReady())
+ {
+ sai_frequency = RCC_PLLI2S_GetFreqDomain_SAI();
+ }
+ break;
+
+#if defined(RCC_SAI2SEL_PLLSRC_SUPPORT)
+ case LL_RCC_SAI2_CLKSOURCE_PLLSRC:
+ switch (LL_RCC_PLL_GetMainSource())
+ {
+ case LL_RCC_PLLSOURCE_HSE: /* HSE clock used as SAI2 clock source */
+ if (LL_RCC_HSE_IsReady())
+ {
+ sai_frequency = HSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_PLLSOURCE_HSI: /* HSI clock used as SAI2 clock source */
+ default:
+ if (LL_RCC_HSI_IsReady())
+ {
+ sai_frequency = HSI_VALUE;
+ }
+ break;
+ }
+ break;
+#endif /* RCC_SAI2SEL_PLLSRC_SUPPORT */
+ case LL_RCC_SAI2_CLKSOURCE_PIN: /* External input clock used as SAI2 clock source */
+ default:
+ sai_frequency = LL_RCC_PERIPH_FREQUENCY_NA;
+ break;
+ }
+ }
+ }
+
+ return sai_frequency;
+}
+
+/**
+ * @brief Return SDMMCx clock frequency
+ * @param SDMMCxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SDMMC1_CLKSOURCE
+ * @arg @ref LL_RCC_SDMMC2_CLKSOURCE (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval SDMMC clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator PLL is not ready
+ */
+uint32_t LL_RCC_GetSDMMCClockFreq(uint32_t SDMMCxSource)
+{
+ uint32_t sdmmc_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_SDMMC_CLKSOURCE(SDMMCxSource));
+
+ if (SDMMCxSource == LL_RCC_SDMMC1_CLKSOURCE)
+ {
+ /* SDMMC1CLK clock frequency */
+ switch (LL_RCC_GetSDMMCClockSource(SDMMCxSource))
+ {
+ case LL_RCC_SDMMC1_CLKSOURCE_PLL48CLK: /* PLL48 clock used as SDMMC1 clock source */
+ switch (LL_RCC_GetCK48MClockSource(LL_RCC_CK48M_CLKSOURCE))
+ {
+ case LL_RCC_CK48M_CLKSOURCE_PLL: /* PLL clock used as 48Mhz domain clock */
+ if (LL_RCC_PLL_IsReady())
+ {
+ sdmmc_frequency = RCC_PLL_GetFreqDomain_48M();
+ }
+ break;
+
+ case LL_RCC_CK48M_CLKSOURCE_PLLSAI: /* PLLSAI clock used as 48Mhz domain clock */
+ default:
+ if (LL_RCC_PLLSAI_IsReady())
+ {
+ sdmmc_frequency = RCC_PLLSAI_GetFreqDomain_48M();
+ }
+ break;
+ }
+ break;
+
+ case LL_RCC_SDMMC1_CLKSOURCE_SYSCLK: /* PLL clock used as SDMMC1 clock source */
+ default:
+ sdmmc_frequency = RCC_GetSystemClockFreq();
+ break;
+ }
+ }
+#if defined(SDMMC2)
+ else
+ {
+ /* SDMMC2CLK clock frequency */
+ switch (LL_RCC_GetSDMMCClockSource(SDMMCxSource))
+ {
+ case LL_RCC_SDMMC2_CLKSOURCE_PLL48CLK: /* PLL48 clock used as SDMMC2 clock source */
+ switch (LL_RCC_GetCK48MClockSource(LL_RCC_CK48M_CLKSOURCE))
+ {
+ case LL_RCC_CK48M_CLKSOURCE_PLL: /* PLL clock used as 48Mhz domain clock */
+ if (LL_RCC_PLL_IsReady())
+ {
+ sdmmc_frequency = RCC_PLL_GetFreqDomain_48M();
+ }
+ break;
+
+ case LL_RCC_CK48M_CLKSOURCE_PLLSAI: /* PLLSAI clock used as 48Mhz domain clock */
+ default:
+ if (LL_RCC_PLLSAI_IsReady())
+ {
+ sdmmc_frequency = RCC_PLLSAI_GetFreqDomain_48M();
+ }
+ break;
+ }
+ break;
+
+ case LL_RCC_SDMMC2_CLKSOURCE_SYSCLK: /* PLL clock used as SDMMC2 clock source */
+ default:
+ sdmmc_frequency = RCC_GetSystemClockFreq();
+ break;
+ }
+ }
+#endif /* SDMMC2 */
+
+ return sdmmc_frequency;
+}
+
+/**
+ * @brief Return RNGx clock frequency
+ * @param RNGxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_RNG_CLKSOURCE
+ * @retval RNG clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready
+ */
+uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource)
+{
+ uint32_t rng_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_RNG_CLKSOURCE(RNGxSource));
+
+ /* RNGCLK clock frequency */
+ switch (LL_RCC_GetRNGClockSource(RNGxSource))
+ {
+ case LL_RCC_RNG_CLKSOURCE_PLL: /* PLL clock used as RNG clock source */
+ if (LL_RCC_PLL_IsReady())
+ {
+ rng_frequency = RCC_PLL_GetFreqDomain_48M();
+ }
+ break;
+
+ case LL_RCC_RNG_CLKSOURCE_PLLSAI: /* PLLSAI clock used as RNG clock source */
+ default:
+ if (LL_RCC_PLLSAI_IsReady())
+ {
+ rng_frequency = RCC_PLLSAI_GetFreqDomain_48M();
+ }
+ break;
+ }
+
+ return rng_frequency;
+}
+
+#if defined(CEC)
+/**
+ * @brief Return CEC clock frequency
+ * @param CECxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_CEC_CLKSOURCE
+ * @retval CEC clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready
+ */
+uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource)
+{
+ uint32_t cec_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_CEC_CLKSOURCE(CECxSource));
+
+ /* CECCLK clock frequency */
+ switch (LL_RCC_GetCECClockSource(CECxSource))
+ {
+ case LL_RCC_CEC_CLKSOURCE_LSE: /* CEC Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ cec_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_CEC_CLKSOURCE_HSI_DIV488: /* CEC Clock is HSI Osc. */
+ default:
+ if (LL_RCC_HSI_IsReady())
+ {
+ cec_frequency = HSI_VALUE/488U;
+ }
+ break;
+ }
+
+ return cec_frequency;
+}
+#endif /* CEC */
+
+/**
+ * @brief Return USBx clock frequency
+ * @param USBxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USB_CLKSOURCE
+ * @retval USB clock frequency (in Hz)
+ */
+uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource)
+{
+ uint32_t usb_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_USB_CLKSOURCE(USBxSource));
+
+ /* USBCLK clock frequency */
+ switch (LL_RCC_GetUSBClockSource(USBxSource))
+ {
+ case LL_RCC_USB_CLKSOURCE_PLL: /* PLL clock used as USB clock source */
+ if (LL_RCC_PLL_IsReady())
+ {
+ usb_frequency = RCC_PLL_GetFreqDomain_48M();
+ }
+ break;
+
+ case LL_RCC_USB_CLKSOURCE_PLLSAI: /* PLLSAI clock used as USB clock source */
+ default:
+ if (LL_RCC_PLLSAI_IsReady())
+ {
+ usb_frequency = RCC_PLLSAI_GetFreqDomain_48M();
+ }
+ break;
+ }
+
+ return usb_frequency;
+}
+
+#if defined(DFSDM1_Channel0)
+/**
+ * @brief Return DFSDMx clock frequency
+ * @param DFSDMxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_DFSDM1_CLKSOURCE
+ * @retval DFSDM clock frequency (in Hz)
+ */
+uint32_t LL_RCC_GetDFSDMClockFreq(uint32_t DFSDMxSource)
+{
+ uint32_t dfsdm_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_DFSDM_CLKSOURCE(DFSDMxSource));
+
+ /* DFSDM1CLK clock frequency */
+ switch (LL_RCC_GetDFSDMClockSource(DFSDMxSource))
+ {
+ case LL_RCC_DFSDM1_CLKSOURCE_SYSCLK: /* DFSDM1 Clock is SYSCLK */
+ dfsdm_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_DFSDM1_CLKSOURCE_PCLK2: /* DFSDM1 Clock is PCLK2 */
+ default:
+ dfsdm_frequency = RCC_GetPCLK2ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+
+ return dfsdm_frequency;
+}
+
+/**
+ * @brief Return DFSDMx Audio clock frequency
+ * @param DFSDMxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE
+ * @retval DFSDM clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready
+ */
+uint32_t LL_RCC_GetDFSDMAudioClockFreq(uint32_t DFSDMxSource)
+{
+ uint32_t dfsdm_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_DFSDM_AUDIO_CLKSOURCE(DFSDMxSource));
+
+ /* DFSDM1CLK clock frequency */
+ switch (LL_RCC_GetDFSDMAudioClockSource(DFSDMxSource))
+ {
+ case LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI1: /* SAI1 clock used as DFSDM1 audio clock */
+ dfsdm_frequency = LL_RCC_GetSAIClockFreq(LL_RCC_SAI1_CLKSOURCE);
+ break;
+
+ case LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI2: /* SAI2 clock used as DFSDM1 audio clock */
+ default:
+ dfsdm_frequency = LL_RCC_GetSAIClockFreq(LL_RCC_SAI2_CLKSOURCE);
+ break;
+ }
+
+ return dfsdm_frequency;
+}
+#endif /* DFSDM1_Channel0 */
+
+#if defined(DSI)
+/**
+ * @brief Return DSI clock frequency
+ * @param DSIxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_DSI_CLKSOURCE
+ * @retval DSI clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that external clock is used
+ */
+uint32_t LL_RCC_GetDSIClockFreq(uint32_t DSIxSource)
+{
+ uint32_t dsi_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_DSI_CLKSOURCE(DSIxSource));
+
+ /* DSICLK clock frequency */
+ switch (LL_RCC_GetDSIClockSource(DSIxSource))
+ {
+ case LL_RCC_DSI_CLKSOURCE_PLL: /* DSI Clock is PLL Osc. */
+ if (LL_RCC_PLL_IsReady())
+ {
+ dsi_frequency = RCC_PLL_GetFreqDomain_DSI();
+ }
+ break;
+
+ case LL_RCC_DSI_CLKSOURCE_PHY: /* DSI Clock is DSI physical clock. */
+ default:
+ dsi_frequency = LL_RCC_PERIPH_FREQUENCY_NA;
+ break;
+ }
+
+ return dsi_frequency;
+}
+#endif /* DSI */
+
+#if defined(LTDC)
+/**
+ * @brief Return LTDC clock frequency
+ * @param LTDCxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_LTDC_CLKSOURCE
+ * @retval LTDC clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator PLLSAI is not ready
+ */
+uint32_t LL_RCC_GetLTDCClockFreq(uint32_t LTDCxSource)
+{
+ uint32_t ltdc_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_LTDC_CLKSOURCE(LTDCxSource));
+
+ if (LL_RCC_PLLSAI_IsReady())
+ {
+ ltdc_frequency = RCC_PLLSAI_GetFreqDomain_LTDC();
+ }
+
+ return ltdc_frequency;
+}
+#endif /* LTDC */
+
+#if defined(SPDIFRX)
+/**
+ * @brief Return SPDIFRX clock frequency
+ * @param SPDIFRXxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE
+ * @retval SPDIFRX clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready
+ */
+uint32_t LL_RCC_GetSPDIFRXClockFreq(uint32_t SPDIFRXxSource)
+{
+ uint32_t spdifrx_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_SPDIFRX_CLKSOURCE(SPDIFRXxSource));
+
+ if (LL_RCC_PLLI2S_IsReady())
+ {
+ spdifrx_frequency = RCC_PLLI2S_GetFreqDomain_SPDIFRX();
+ }
+
+ return spdifrx_frequency;
+}
+#endif /* SPDIFRX */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_LL_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Return SYSTEM clock frequency
+ * @retval SYSTEM clock frequency (in Hz)
+ */
+uint32_t RCC_GetSystemClockFreq(void)
+{
+ uint32_t frequency = 0U;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ switch (LL_RCC_GetSysClkSource())
+ {
+ case LL_RCC_SYS_CLKSOURCE_STATUS_HSI: /* HSI used as system clock source */
+ frequency = HSI_VALUE;
+ break;
+
+ case LL_RCC_SYS_CLKSOURCE_STATUS_HSE: /* HSE used as system clock source */
+ frequency = HSE_VALUE;
+ break;
+
+ case LL_RCC_SYS_CLKSOURCE_STATUS_PLL: /* PLL used as system clock source */
+ frequency = RCC_PLL_GetFreqDomain_SYS();
+ break;
+
+ default:
+ frequency = HSI_VALUE;
+ break;
+ }
+
+ return frequency;
+}
+
+/**
+ * @brief Return HCLK clock frequency
+ * @param SYSCLK_Frequency SYSCLK clock frequency
+ * @retval HCLK clock frequency (in Hz)
+ */
+uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency)
+{
+ /* HCLK clock frequency */
+ return __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, LL_RCC_GetAHBPrescaler());
+}
+
+/**
+ * @brief Return PCLK1 clock frequency
+ * @param HCLK_Frequency HCLK clock frequency
+ * @retval PCLK1 clock frequency (in Hz)
+ */
+uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency)
+{
+ /* PCLK1 clock frequency */
+ return __LL_RCC_CALC_PCLK1_FREQ(HCLK_Frequency, LL_RCC_GetAPB1Prescaler());
+}
+
+/**
+ * @brief Return PCLK2 clock frequency
+ * @param HCLK_Frequency HCLK clock frequency
+ * @retval PCLK2 clock frequency (in Hz)
+ */
+uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency)
+{
+ /* PCLK2 clock frequency */
+ return __LL_RCC_CALC_PCLK2_FREQ(HCLK_Frequency, LL_RCC_GetAPB2Prescaler());
+}
+
+/**
+ * @brief Return PLL clock frequency used for system domain
+ * @retval PLL clock frequency (in Hz)
+ */
+uint32_t RCC_PLL_GetFreqDomain_SYS(void)
+{
+ uint32_t pllinputfreq = 0U, pllsource = 0U;
+
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
+ SYSCLK = PLL_VCO / PLLP
+ */
+ pllsource = LL_RCC_PLL_GetMainSource();
+
+ switch (pllsource)
+ {
+ case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */
+ pllinputfreq = HSI_VALUE;
+ break;
+
+ case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */
+ pllinputfreq = HSE_VALUE;
+ break;
+
+ default:
+ pllinputfreq = HSI_VALUE;
+ break;
+ }
+ return __LL_RCC_CALC_PLLCLK_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(),
+ LL_RCC_PLL_GetN(), LL_RCC_PLL_GetP());
+}
+
+/**
+ * @brief Return PLL clock frequency used for 48 MHz domain
+ * @retval PLL clock frequency (in Hz)
+ */
+uint32_t RCC_PLL_GetFreqDomain_48M(void)
+{
+ uint32_t pllinputfreq = 0U, pllsource = 0U;
+
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM ) * PLLN
+ 48M Domain clock = PLL_VCO / PLLQ
+ */
+ pllsource = LL_RCC_PLL_GetMainSource();
+
+ switch (pllsource)
+ {
+ case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */
+ pllinputfreq = HSI_VALUE;
+ break;
+
+ case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */
+ pllinputfreq = HSE_VALUE;
+ break;
+
+ default:
+ pllinputfreq = HSI_VALUE;
+ break;
+ }
+ return __LL_RCC_CALC_PLLCLK_48M_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(),
+ LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ());
+}
+
+#if defined(DSI)
+/**
+ * @brief Return PLL clock frequency used for DSI clock
+ * @retval PLL clock frequency (in Hz)
+ */
+uint32_t RCC_PLL_GetFreqDomain_DSI(void)
+{
+ uint32_t pllinputfreq = 0U, pllsource = 0U;
+
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
+ DSICLK = PLL_VCO / PLLR
+ */
+ pllsource = LL_RCC_PLL_GetMainSource();
+
+ switch (pllsource)
+ {
+ case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */
+ pllinputfreq = HSE_VALUE;
+ break;
+
+ case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */
+ default:
+ pllinputfreq = HSI_VALUE;
+ break;
+ }
+ return __LL_RCC_CALC_PLLCLK_DSI_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(),
+ LL_RCC_PLL_GetN(), LL_RCC_PLL_GetR());
+}
+#endif /* DSI */
+
+/**
+ * @brief Return PLLSAI clock frequency used for SAI1 and SAI2 domains
+ * @retval PLLSAI clock frequency (in Hz)
+ */
+uint32_t RCC_PLLSAI_GetFreqDomain_SAI(void)
+{
+ uint32_t pllinputfreq = 0U, pllsource = 0U;
+
+ /* PLLSAI_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLSAIN
+ SAI1 and SAI2 domains clock = (PLLSAI_VCO / PLLSAIQ) / PLLSAIDIVQ
+ */
+ pllsource = LL_RCC_PLL_GetMainSource();
+
+ switch (pllsource)
+ {
+ case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLLSAI clock source */
+ pllinputfreq = HSI_VALUE;
+ break;
+
+ case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLSAI clock source */
+ pllinputfreq = HSE_VALUE;
+ break;
+
+ default:
+ pllinputfreq = HSI_VALUE;
+ break;
+ }
+ return __LL_RCC_CALC_PLLSAI_SAI_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(),
+ LL_RCC_PLLSAI_GetN(), LL_RCC_PLLSAI_GetQ(), LL_RCC_PLLSAI_GetDIVQ());
+}
+
+/**
+ * @brief Return PLLSAI clock frequency used for 48Mhz domain
+ * @retval PLLSAI clock frequency (in Hz)
+ */
+uint32_t RCC_PLLSAI_GetFreqDomain_48M(void)
+{
+ uint32_t pllinputfreq = 0U, pllsource = 0U;
+
+ /* PLLSAI_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLSAIN
+ 48M Domain clock = PLLSAI_VCO / PLLSAIP
+ */
+ pllsource = LL_RCC_PLL_GetMainSource();
+
+ switch (pllsource)
+ {
+ case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLLSAI clock source */
+ pllinputfreq = HSI_VALUE;
+ break;
+
+ case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLSAI clock source */
+ pllinputfreq = HSE_VALUE;
+ break;
+
+ default:
+ pllinputfreq = HSI_VALUE;
+ break;
+ }
+ return __LL_RCC_CALC_PLLSAI_48M_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(),
+ LL_RCC_PLLSAI_GetN(), LL_RCC_PLLSAI_GetP());
+}
+
+#if defined(LTDC)
+/**
+ * @brief Return PLLSAI clock frequency used for LTDC domain
+ * @retval PLLSAI clock frequency (in Hz)
+ */
+uint32_t RCC_PLLSAI_GetFreqDomain_LTDC(void)
+{
+ uint32_t pllinputfreq = 0U, pllsource = 0U;
+
+ /* PLLSAI_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLSAIN
+ LTDC Domain clock = (PLLSAI_VCO / PLLSAIR) / PLLSAIDIVR
+ */
+ pllsource = LL_RCC_PLL_GetMainSource();
+
+ switch (pllsource)
+ {
+ case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLLSAI clock source */
+ pllinputfreq = HSI_VALUE;
+ break;
+
+ case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLSAI clock source */
+ pllinputfreq = HSE_VALUE;
+ break;
+
+ default:
+ pllinputfreq = HSI_VALUE;
+ break;
+ }
+ return __LL_RCC_CALC_PLLSAI_LTDC_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(),
+ LL_RCC_PLLSAI_GetN(), LL_RCC_PLLSAI_GetR(), LL_RCC_PLLSAI_GetDIVR());
+}
+#endif /* LTDC */
+
+/**
+ * @brief Return PLLI2S clock frequency used for SAI1 and SAI2 domains
+ * @retval PLLI2S clock frequency (in Hz)
+ */
+uint32_t RCC_PLLI2S_GetFreqDomain_SAI(void)
+{
+ uint32_t pllinputfreq = 0U, pllsource = 0U;
+
+ /* PLLI2S_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLI2SN
+ SAI1 and SAI2 domains clock = (PLLI2S_VCO / PLLI2SQ) / PLLI2SDIVQ
+ */
+ pllsource = LL_RCC_PLL_GetMainSource();
+
+ switch (pllsource)
+ {
+ case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLLI2S clock source */
+ pllinputfreq = HSI_VALUE;
+ break;
+
+ case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLI2S clock source */
+ pllinputfreq = HSE_VALUE;
+ break;
+
+ default:
+ pllinputfreq = HSI_VALUE;
+ break;
+ }
+ return __LL_RCC_CALC_PLLI2S_SAI_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(),
+ LL_RCC_PLLI2S_GetN(), LL_RCC_PLLI2S_GetQ(), LL_RCC_PLLI2S_GetDIVQ());
+}
+
+#if defined(SPDIFRX)
+/**
+ * @brief Return PLLI2S clock frequency used for SPDIFRX domain
+ * @retval PLLI2S clock frequency (in Hz)
+ */
+uint32_t RCC_PLLI2S_GetFreqDomain_SPDIFRX(void)
+{
+ uint32_t pllinputfreq = 0U, pllsource = 0U;
+
+ /* PLLI2S_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLI2SN
+ SPDIFRX Domain clock = PLLI2S_VCO / PLLI2SP
+ */
+ pllsource = LL_RCC_PLL_GetMainSource();
+
+ switch (pllsource)
+ {
+ case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLLI2S clock source */
+ pllinputfreq = HSI_VALUE;
+ break;
+
+ case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLI2S clock source */
+ pllinputfreq = HSE_VALUE;
+ break;
+
+ default:
+ pllinputfreq = HSI_VALUE;
+ break;
+ }
+
+ return __LL_RCC_CALC_PLLI2S_SPDIFRX_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(),
+ LL_RCC_PLLI2S_GetN(), LL_RCC_PLLI2S_GetP());
+}
+#endif /* SPDIFRX */
+
+/**
+ * @brief Return PLLI2S clock frequency used for I2S domain
+ * @retval PLLI2S clock frequency (in Hz)
+ */
+uint32_t RCC_PLLI2S_GetFreqDomain_I2S(void)
+{
+ uint32_t pllinputfreq = 0U, pllsource = 0U;
+
+ /* PLLI2S_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLI2SN
+ I2S Domain clock = PLLI2S_VCO / PLLI2SR
+ */
+ pllsource = LL_RCC_PLL_GetMainSource();
+
+ switch (pllsource)
+ {
+ case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLI2S clock source */
+ pllinputfreq = HSE_VALUE;
+ break;
+
+ case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLLI2S clock source */
+ default:
+ pllinputfreq = HSI_VALUE;
+ break;
+ }
+ return __LL_RCC_CALC_PLLI2S_I2S_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(),
+ LL_RCC_PLLI2S_GetN(), LL_RCC_PLLI2S_GetR());
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(RCC) */
+
+/**
+ * @}
+ */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c
new file mode 100644
index 00000000..de96f7fc
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_usart.c
@@ -0,0 +1,466 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_ll_usart.c
+ * @author MCD Application Team
+ * @brief USART LL module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_ll_usart.h"
+#include "stm32f7xx_ll_rcc.h"
+#include "stm32f7xx_ll_bus.h"
+#ifdef USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F7xx_LL_Driver
+ * @{
+ */
+
+#if defined (USART1) || defined (USART2) || defined (USART3) || defined (USART6) || defined (UART4) || defined (UART5) || defined (UART7) || defined (UART8)
+
+/** @addtogroup USART_LL
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup USART_LL_Private_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup USART_LL_Private_Macros
+ * @{
+ */
+
+/* __BAUDRATE__ The maximum Baud Rate is derived from the maximum clock available
+ * divided by the smallest oversampling used on the USART (i.e. 8) */
+#define IS_LL_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) <= 27000000U)
+
+/* __VALUE__ In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. */
+#define IS_LL_USART_BRR_MIN(__VALUE__) ((__VALUE__) >= 16U)
+
+/* __VALUE__ BRR content must be lower than or equal to 0xFFFF. */
+#define IS_LL_USART_BRR_MAX(__VALUE__) ((__VALUE__) <= 0x0000FFFFU)
+
+#define IS_LL_USART_DIRECTION(__VALUE__) (((__VALUE__) == LL_USART_DIRECTION_NONE) \
+ || ((__VALUE__) == LL_USART_DIRECTION_RX) \
+ || ((__VALUE__) == LL_USART_DIRECTION_TX) \
+ || ((__VALUE__) == LL_USART_DIRECTION_TX_RX))
+
+#define IS_LL_USART_PARITY(__VALUE__) (((__VALUE__) == LL_USART_PARITY_NONE) \
+ || ((__VALUE__) == LL_USART_PARITY_EVEN) \
+ || ((__VALUE__) == LL_USART_PARITY_ODD))
+
+#define IS_LL_USART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_USART_DATAWIDTH_7B) \
+ || ((__VALUE__) == LL_USART_DATAWIDTH_8B) \
+ || ((__VALUE__) == LL_USART_DATAWIDTH_9B))
+
+#define IS_LL_USART_OVERSAMPLING(__VALUE__) (((__VALUE__) == LL_USART_OVERSAMPLING_16) \
+ || ((__VALUE__) == LL_USART_OVERSAMPLING_8))
+
+#define IS_LL_USART_LASTBITCLKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_LASTCLKPULSE_NO_OUTPUT) \
+ || ((__VALUE__) == LL_USART_LASTCLKPULSE_OUTPUT))
+
+#define IS_LL_USART_CLOCKPHASE(__VALUE__) (((__VALUE__) == LL_USART_PHASE_1EDGE) \
+ || ((__VALUE__) == LL_USART_PHASE_2EDGE))
+
+#define IS_LL_USART_CLOCKPOLARITY(__VALUE__) (((__VALUE__) == LL_USART_POLARITY_LOW) \
+ || ((__VALUE__) == LL_USART_POLARITY_HIGH))
+
+#define IS_LL_USART_CLOCKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_CLOCK_DISABLE) \
+ || ((__VALUE__) == LL_USART_CLOCK_ENABLE))
+
+#define IS_LL_USART_STOPBITS(__VALUE__) (((__VALUE__) == LL_USART_STOPBITS_0_5) \
+ || ((__VALUE__) == LL_USART_STOPBITS_1) \
+ || ((__VALUE__) == LL_USART_STOPBITS_1_5) \
+ || ((__VALUE__) == LL_USART_STOPBITS_2))
+
+#define IS_LL_USART_HWCONTROL(__VALUE__) (((__VALUE__) == LL_USART_HWCONTROL_NONE) \
+ || ((__VALUE__) == LL_USART_HWCONTROL_RTS) \
+ || ((__VALUE__) == LL_USART_HWCONTROL_CTS) \
+ || ((__VALUE__) == LL_USART_HWCONTROL_RTS_CTS))
+
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup USART_LL_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup USART_LL_EF_Init
+ * @{
+ */
+
+/**
+ * @brief De-initialize USART registers (Registers restored to their default values).
+ * @param USARTx USART Instance
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: USART registers are de-initialized
+ * - ERROR: USART registers are not de-initialized
+ */
+ErrorStatus LL_USART_DeInit(USART_TypeDef *USARTx)
+{
+ ErrorStatus status = SUCCESS;
+
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(USARTx));
+
+ if (USARTx == USART1)
+ {
+ /* Force reset of USART clock */
+ LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_USART1);
+
+ /* Release reset of USART clock */
+ LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_USART1);
+ }
+ else if (USARTx == USART2)
+ {
+ /* Force reset of USART clock */
+ LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART2);
+
+ /* Release reset of USART clock */
+ LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART2);
+ }
+ else if (USARTx == USART3)
+ {
+ /* Force reset of USART clock */
+ LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART3);
+
+ /* Release reset of USART clock */
+ LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART3);
+ }
+ else if (USARTx == USART6)
+ {
+ /* Force reset of USART clock */
+ LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_USART6);
+
+ /* Release reset of USART clock */
+ LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_USART6);
+ }
+ else if (USARTx == UART4)
+ {
+ /* Force reset of UART clock */
+ LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART4);
+
+ /* Release reset of UART clock */
+ LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART4);
+ }
+ else if (USARTx == UART5)
+ {
+ /* Force reset of UART clock */
+ LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART5);
+
+ /* Release reset of UART clock */
+ LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART5);
+ }
+ else if (USARTx == UART7)
+ {
+ /* Force reset of UART clock */
+ LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART7);
+
+ /* Release reset of UART clock */
+ LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART7);
+ }
+ else if (USARTx == UART8)
+ {
+ /* Force reset of UART clock */
+ LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART8);
+
+ /* Release reset of UART clock */
+ LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART8);
+ }
+ else
+ {
+ status = ERROR;
+ }
+
+ return (status);
+}
+
+/**
+ * @brief Initialize USART registers according to the specified
+ * parameters in USART_InitStruct.
+ * @note As some bits in USART configuration registers can only be written when the USART is disabled (USART_CR1_UE bit =0),
+ * USART IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned.
+ * @note Baud rate value stored in USART_InitStruct BaudRate field, should be valid (different from 0).
+ * @param USARTx USART Instance
+ * @param USART_InitStruct pointer to a LL_USART_InitTypeDef structure
+ * that contains the configuration information for the specified USART peripheral.
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: USART registers are initialized according to USART_InitStruct content
+ * - ERROR: Problem occurred during USART Registers initialization
+ */
+ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_InitStruct)
+{
+ ErrorStatus status = ERROR;
+ uint32_t periphclk = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(USARTx));
+ assert_param(IS_LL_USART_BAUDRATE(USART_InitStruct->BaudRate));
+ assert_param(IS_LL_USART_DATAWIDTH(USART_InitStruct->DataWidth));
+ assert_param(IS_LL_USART_STOPBITS(USART_InitStruct->StopBits));
+ assert_param(IS_LL_USART_PARITY(USART_InitStruct->Parity));
+ assert_param(IS_LL_USART_DIRECTION(USART_InitStruct->TransferDirection));
+ assert_param(IS_LL_USART_HWCONTROL(USART_InitStruct->HardwareFlowControl));
+ assert_param(IS_LL_USART_OVERSAMPLING(USART_InitStruct->OverSampling));
+
+ /* USART needs to be in disabled state, in order to be able to configure some bits in
+ CRx registers */
+ if (LL_USART_IsEnabled(USARTx) == 0U)
+ {
+ /*---------------------------- USART CR1 Configuration ---------------------
+ * Configure USARTx CR1 (USART Word Length, Parity, Mode and Oversampling bits) with parameters:
+ * - DataWidth: USART_CR1_M bits according to USART_InitStruct->DataWidth value
+ * - Parity: USART_CR1_PCE, USART_CR1_PS bits according to USART_InitStruct->Parity value
+ * - TransferDirection: USART_CR1_TE, USART_CR1_RE bits according to USART_InitStruct->TransferDirection value
+ * - Oversampling: USART_CR1_OVER8 bit according to USART_InitStruct->OverSampling value.
+ */
+ MODIFY_REG(USARTx->CR1,
+ (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS |
+ USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8),
+ (USART_InitStruct->DataWidth | USART_InitStruct->Parity |
+ USART_InitStruct->TransferDirection | USART_InitStruct->OverSampling));
+
+ /*---------------------------- USART CR2 Configuration ---------------------
+ * Configure USARTx CR2 (Stop bits) with parameters:
+ * - Stop Bits: USART_CR2_STOP bits according to USART_InitStruct->StopBits value.
+ * - CLKEN, CPOL, CPHA and LBCL bits are to be configured using LL_USART_ClockInit().
+ */
+ LL_USART_SetStopBitsLength(USARTx, USART_InitStruct->StopBits);
+
+ /*---------------------------- USART CR3 Configuration ---------------------
+ * Configure USARTx CR3 (Hardware Flow Control) with parameters:
+ * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according to USART_InitStruct->HardwareFlowControl value.
+ */
+ LL_USART_SetHWFlowCtrl(USARTx, USART_InitStruct->HardwareFlowControl);
+
+ /*---------------------------- USART BRR Configuration ---------------------
+ * Retrieve Clock frequency used for USART Peripheral
+ */
+ if (USARTx == USART1)
+ {
+ periphclk = LL_RCC_GetUSARTClockFreq(LL_RCC_USART1_CLKSOURCE);
+ }
+ else if (USARTx == USART2)
+ {
+ periphclk = LL_RCC_GetUSARTClockFreq(LL_RCC_USART2_CLKSOURCE);
+ }
+ else if (USARTx == USART3)
+ {
+ periphclk = LL_RCC_GetUSARTClockFreq(LL_RCC_USART3_CLKSOURCE);
+ }
+ else if (USARTx == USART6)
+ {
+ periphclk = LL_RCC_GetUSARTClockFreq(LL_RCC_USART6_CLKSOURCE);
+ }
+ else if (USARTx == UART4)
+ {
+ periphclk = LL_RCC_GetUARTClockFreq(LL_RCC_UART4_CLKSOURCE);
+ }
+ else if (USARTx == UART5)
+ {
+ periphclk = LL_RCC_GetUARTClockFreq(LL_RCC_UART5_CLKSOURCE);
+ }
+ else if (USARTx == UART7)
+ {
+ periphclk = LL_RCC_GetUARTClockFreq(LL_RCC_UART7_CLKSOURCE);
+ }
+ else if (USARTx == UART8)
+ {
+ periphclk = LL_RCC_GetUARTClockFreq(LL_RCC_UART8_CLKSOURCE);
+ }
+ else
+ {
+ /* Nothing to do, as error code is already assigned to ERROR value */
+ }
+
+ /* Configure the USART Baud Rate :
+ - valid baud rate value (different from 0) is required
+ - Peripheral clock as returned by RCC service, should be valid (different from 0).
+ */
+ if ((periphclk != LL_RCC_PERIPH_FREQUENCY_NO)
+ && (USART_InitStruct->BaudRate != 0U))
+ {
+ status = SUCCESS;
+ LL_USART_SetBaudRate(USARTx,
+ periphclk,
+ USART_InitStruct->OverSampling,
+ USART_InitStruct->BaudRate);
+
+ /* Check BRR is greater than or equal to 16d */
+ assert_param(IS_LL_USART_BRR_MIN(USARTx->BRR));
+
+ /* Check BRR is greater than or equal to 16d */
+ assert_param(IS_LL_USART_BRR_MAX(USARTx->BRR));
+ }
+ }
+ /* Endif (=> USART not in Disabled state => return ERROR) */
+
+ return (status);
+}
+
+/**
+ * @brief Set each @ref LL_USART_InitTypeDef field to default value.
+ * @param USART_InitStruct pointer to a @ref LL_USART_InitTypeDef structure
+ * whose fields will be set to default values.
+ * @retval None
+ */
+
+void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct)
+{
+ /* Set USART_InitStruct fields to default values */
+ USART_InitStruct->BaudRate = 9600U;
+ USART_InitStruct->DataWidth = LL_USART_DATAWIDTH_8B;
+ USART_InitStruct->StopBits = LL_USART_STOPBITS_1;
+ USART_InitStruct->Parity = LL_USART_PARITY_NONE ;
+ USART_InitStruct->TransferDirection = LL_USART_DIRECTION_TX_RX;
+ USART_InitStruct->HardwareFlowControl = LL_USART_HWCONTROL_NONE;
+ USART_InitStruct->OverSampling = LL_USART_OVERSAMPLING_16;
+}
+
+/**
+ * @brief Initialize USART Clock related settings according to the
+ * specified parameters in the USART_ClockInitStruct.
+ * @note As some bits in USART configuration registers can only be written when the USART is disabled (USART_CR1_UE bit =0),
+ * USART IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned.
+ * @param USARTx USART Instance
+ * @param USART_ClockInitStruct pointer to a @ref LL_USART_ClockInitTypeDef structure
+ * that contains the Clock configuration information for the specified USART peripheral.
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: USART registers related to Clock settings are initialized according to USART_ClockInitStruct content
+ * - ERROR: Problem occurred during USART Registers initialization
+ */
+ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, LL_USART_ClockInitTypeDef *USART_ClockInitStruct)
+{
+ ErrorStatus status = SUCCESS;
+
+ /* Check USART Instance and Clock signal output parameters */
+ assert_param(IS_UART_INSTANCE(USARTx));
+ assert_param(IS_LL_USART_CLOCKOUTPUT(USART_ClockInitStruct->ClockOutput));
+
+ /* USART needs to be in disabled state, in order to be able to configure some bits in
+ CRx registers */
+ if (LL_USART_IsEnabled(USARTx) == 0U)
+ {
+ /*---------------------------- USART CR2 Configuration -----------------------*/
+ /* If Clock signal has to be output */
+ if (USART_ClockInitStruct->ClockOutput == LL_USART_CLOCK_DISABLE)
+ {
+ /* Deactivate Clock signal delivery :
+ * - Disable Clock Output: USART_CR2_CLKEN cleared
+ */
+ LL_USART_DisableSCLKOutput(USARTx);
+ }
+ else
+ {
+ /* Ensure USART instance is USART capable */
+ assert_param(IS_USART_INSTANCE(USARTx));
+
+ /* Check clock related parameters */
+ assert_param(IS_LL_USART_CLOCKPOLARITY(USART_ClockInitStruct->ClockPolarity));
+ assert_param(IS_LL_USART_CLOCKPHASE(USART_ClockInitStruct->ClockPhase));
+ assert_param(IS_LL_USART_LASTBITCLKOUTPUT(USART_ClockInitStruct->LastBitClockPulse));
+
+ /*---------------------------- USART CR2 Configuration -----------------------
+ * Configure USARTx CR2 (Clock signal related bits) with parameters:
+ * - Enable Clock Output: USART_CR2_CLKEN set
+ * - Clock Polarity: USART_CR2_CPOL bit according to USART_ClockInitStruct->ClockPolarity value
+ * - Clock Phase: USART_CR2_CPHA bit according to USART_ClockInitStruct->ClockPhase value
+ * - Last Bit Clock Pulse Output: USART_CR2_LBCL bit according to USART_ClockInitStruct->LastBitClockPulse value.
+ */
+ MODIFY_REG(USARTx->CR2,
+ USART_CR2_CLKEN | USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL,
+ USART_CR2_CLKEN | USART_ClockInitStruct->ClockPolarity |
+ USART_ClockInitStruct->ClockPhase | USART_ClockInitStruct->LastBitClockPulse);
+ }
+ }
+ /* Else (USART not in Disabled state => return ERROR */
+ else
+ {
+ status = ERROR;
+ }
+
+ return (status);
+}
+
+/**
+ * @brief Set each field of a @ref LL_USART_ClockInitTypeDef type structure to default value.
+ * @param USART_ClockInitStruct pointer to a @ref LL_USART_ClockInitTypeDef structure
+ * whose fields will be set to default values.
+ * @retval None
+ */
+void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct)
+{
+ /* Set LL_USART_ClockInitStruct fields with default values */
+ USART_ClockInitStruct->ClockOutput = LL_USART_CLOCK_DISABLE;
+ USART_ClockInitStruct->ClockPolarity = LL_USART_POLARITY_LOW; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */
+ USART_ClockInitStruct->ClockPhase = LL_USART_PHASE_1EDGE; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */
+ USART_ClockInitStruct->LastBitClockPulse = LL_USART_LASTCLKPULSE_NO_OUTPUT; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* USART1 || USART2 || USART3 || USART6 || UART4 || UART5 || UART7 || UART8 */
+
+/**
+ * @}
+ */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c
new file mode 100644
index 00000000..5e386627
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_utils.c
@@ -0,0 +1,755 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_ll_utils.c
+ * @author MCD Application Team
+ * @brief UTILS LL module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_ll_utils.h"
+#include "stm32f7xx_ll_rcc.h"
+#include "stm32f7xx_ll_system.h"
+#include "stm32f7xx_ll_pwr.h"
+#ifdef USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+/** @addtogroup STM32F7xx_LL_Driver
+ * @{
+ */
+
+/** @addtogroup UTILS_LL
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup UTILS_LL_Private_Constants
+ * @{
+ */
+#define UTILS_MAX_FREQUENCY_SCALE1 216000000U /*!< Maximum frequency for system clock at power scale1, in Hz */
+#define UTILS_MAX_FREQUENCY_SCALE2 180000000U /*!< Maximum frequency for system clock at power scale2, in Hz */
+#define UTILS_MAX_FREQUENCY_SCALE3 144000000U /*!< Maximum frequency for system clock at power scale3, in Hz */
+
+/* Defines used for PLL range */
+#define UTILS_PLLVCO_INPUT_MIN 950000U /*!< Frequency min for PLLVCO input, in Hz */
+#define UTILS_PLLVCO_INPUT_MAX 2100000U /*!< Frequency max for PLLVCO input, in Hz */
+#define UTILS_PLLVCO_OUTPUT_MIN 100000000U /*!< Frequency min for PLLVCO output, in Hz */
+#define UTILS_PLLVCO_OUTPUT_MAX 432000000U /*!< Frequency max for PLLVCO output, in Hz */
+
+/* Defines used for HSE range */
+#define UTILS_HSE_FREQUENCY_MIN 4000000U /*!< Frequency min for HSE frequency, in Hz */
+#define UTILS_HSE_FREQUENCY_MAX 26000000U /*!< Frequency max for HSE frequency, in Hz */
+
+/* Defines used for FLASH latency according to HCLK Frequency */
+#define UTILS_SCALE1_LATENCY1_FREQ 30000000U /*!< HCLK frequency to set FLASH latency 1 in power scale 1 */
+#define UTILS_SCALE1_LATENCY2_FREQ 60000000U /*!< HCLK frequency to set FLASH latency 2 in power scale 1 */
+#define UTILS_SCALE1_LATENCY3_FREQ 90000000U /*!< HCLK frequency to set FLASH latency 3 in power scale 1 */
+#define UTILS_SCALE1_LATENCY4_FREQ 120000000U /*!< HCLK frequency to set FLASH latency 4 in power scale 1 */
+#define UTILS_SCALE1_LATENCY5_FREQ 150000000U /*!< HCLK frequency to set FLASH latency 5 in power scale 1 */
+#define UTILS_SCALE1_LATENCY6_FREQ 180000000U /*!< HCLK frequency to set FLASH latency 6 in power scale 1 with over-drive mode */
+#define UTILS_SCALE1_LATENCY7_FREQ 210000000U /*!< HCLK frequency to set FLASH latency 7 in power scale 1 with over-drive mode */
+#define UTILS_SCALE2_LATENCY1_FREQ 30000000U /*!< HCLK frequency to set FLASH latency 1 in power scale 2 */
+#define UTILS_SCALE2_LATENCY2_FREQ 60000000U /*!< HCLK frequency to set FLASH latency 2 in power scale 2 */
+#define UTILS_SCALE2_LATENCY3_FREQ 90000000U /*!< HCLK frequency to set FLASH latency 3 in power scale 2 */
+#define UTILS_SCALE2_LATENCY4_FREQ 120000000U /*!< HCLK frequency to set FLASH latency 4 in power scale 2 */
+#define UTILS_SCALE2_LATENCY5_FREQ 150000000U /*!< HCLK frequency to set FLASH latency 5 in power scale 2 */
+#define UTILS_SCALE3_LATENCY1_FREQ 30000000U /*!< HCLK frequency to set FLASH latency 1 in power scale 3 */
+#define UTILS_SCALE3_LATENCY2_FREQ 60000000U /*!< HCLK frequency to set FLASH latency 2 in power scale 3 */
+#define UTILS_SCALE3_LATENCY3_FREQ 90000000U /*!< HCLK frequency to set FLASH latency 3 in power scale 3 */
+#define UTILS_SCALE3_LATENCY4_FREQ 120000000U /*!< HCLK frequency to set FLASH latency 4 in power scale 3 */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup UTILS_LL_Private_Macros
+ * @{
+ */
+#define IS_LL_UTILS_SYSCLK_DIV(__VALUE__) (((__VALUE__) == LL_RCC_SYSCLK_DIV_1) \
+ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_2) \
+ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_4) \
+ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_8) \
+ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_16) \
+ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_64) \
+ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_128) \
+ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_256) \
+ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_512))
+
+#define IS_LL_UTILS_APB1_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB1_DIV_1) \
+ || ((__VALUE__) == LL_RCC_APB1_DIV_2) \
+ || ((__VALUE__) == LL_RCC_APB1_DIV_4) \
+ || ((__VALUE__) == LL_RCC_APB1_DIV_8) \
+ || ((__VALUE__) == LL_RCC_APB1_DIV_16))
+
+#define IS_LL_UTILS_APB2_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB2_DIV_1) \
+ || ((__VALUE__) == LL_RCC_APB2_DIV_2) \
+ || ((__VALUE__) == LL_RCC_APB2_DIV_4) \
+ || ((__VALUE__) == LL_RCC_APB2_DIV_8) \
+ || ((__VALUE__) == LL_RCC_APB2_DIV_16))
+
+#define IS_LL_UTILS_PLLM_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLLM_DIV_2) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_3) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_4) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_5) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_6) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_7) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_8) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_9) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_10) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_11) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_12) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_13) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_14) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_15) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_16) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_17) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_18) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_19) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_20) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_21) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_22) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_23) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_24) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_25) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_26) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_27) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_28) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_29) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_30) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_31) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_32) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_33) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_34) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_35) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_36) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_37) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_38) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_39) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_40) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_41) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_42) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_43) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_44) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_45) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_46) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_47) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_48) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_49) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_50) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_51) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_52) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_53) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_54) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_55) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_56) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_57) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_58) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_59) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_60) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_61) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_62) \
+ || ((__VALUE__) == LL_RCC_PLLM_DIV_63))
+
+#define IS_LL_UTILS_PLLN_VALUE(__VALUE__) ((50 <= (__VALUE__)) && ((__VALUE__) <= 432))
+
+#define IS_LL_UTILS_PLLP_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLLP_DIV_2) \
+ || ((__VALUE__) == LL_RCC_PLLP_DIV_4) \
+ || ((__VALUE__) == LL_RCC_PLLP_DIV_6) \
+ || ((__VALUE__) == LL_RCC_PLLP_DIV_8))
+
+#define IS_LL_UTILS_PLLVCO_INPUT(__VALUE__) ((UTILS_PLLVCO_INPUT_MIN <= (__VALUE__)) && ((__VALUE__) <= UTILS_PLLVCO_INPUT_MAX))
+
+#define IS_LL_UTILS_PLLVCO_OUTPUT(__VALUE__) ((UTILS_PLLVCO_OUTPUT_MIN <= (__VALUE__)) && ((__VALUE__) <= UTILS_PLLVCO_OUTPUT_MAX))
+
+#define IS_LL_UTILS_PLL_FREQUENCY(__VALUE__) ((LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1) ? ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE1) : \
+ (LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE2) ? ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE2) : \
+ ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE3))
+
+#define IS_LL_UTILS_HSE_BYPASS(__STATE__) (((__STATE__) == LL_UTILS_HSEBYPASS_ON) \
+ || ((__STATE__) == LL_UTILS_HSEBYPASS_OFF))
+
+#define IS_LL_UTILS_HSE_FREQUENCY(__FREQUENCY__) (((__FREQUENCY__) >= UTILS_HSE_FREQUENCY_MIN) && ((__FREQUENCY__) <= UTILS_HSE_FREQUENCY_MAX))
+/**
+ * @}
+ */
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup UTILS_LL_Private_Functions UTILS Private functions
+ * @{
+ */
+static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency,
+ LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct);
+static ErrorStatus UTILS_SetFlashLatency(uint32_t HCLK_Frequency);
+static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
+static ErrorStatus UTILS_PLL_IsBusy(void);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup UTILS_LL_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup UTILS_LL_EF_DELAY
+ * @{
+ */
+
+/**
+ * @brief This function configures the Cortex-M SysTick source to have 1ms time base.
+ * @note When a RTOS is used, it is recommended to avoid changing the Systick
+ * configuration by calling this function, for a delay use rather osDelay RTOS service.
+ * @param HCLKFrequency HCLK frequency in Hz
+ * @note HCLK frequency can be calculated thanks to RCC helper macro or function @ref LL_RCC_GetSystemClocksFreq
+ * @retval None
+ */
+void LL_Init1msTick(uint32_t HCLKFrequency)
+{
+ /* Use frequency provided in argument */
+ LL_InitTick(HCLKFrequency, 1000U);
+}
+
+/**
+ * @brief This function provides accurate delay (in milliseconds) based
+ * on SysTick counter flag
+ * @note When a RTOS is used, it is recommended to avoid using blocking delay
+ * and use rather osDelay service.
+ * @note To respect 1ms timebase, user should call @ref LL_Init1msTick function which
+ * will configure Systick to 1ms
+ * @param Delay specifies the delay time length, in milliseconds.
+ * @retval None
+ */
+void LL_mDelay(uint32_t Delay)
+{
+ __IO uint32_t tmp = SysTick->CTRL; /* Clear the COUNTFLAG first */
+ /* Add this code to indicate that local variable is not used */
+ ((void)tmp);
+
+ /* Add a period to guaranty minimum wait */
+ if(Delay < LL_MAX_DELAY)
+ {
+ Delay++;
+ }
+
+ while (Delay)
+ {
+ if((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) != 0U)
+ {
+ Delay--;
+ }
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup UTILS_EF_SYSTEM
+ * @brief System Configuration functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### System Configuration functions #####
+ ===============================================================================
+ [..]
+ System, AHB and APB buses clocks configuration
+
+ (+) The maximum frequency of the SYSCLK, HCLK, PCLK1 and PCLK2 is 216000000 Hz.
+ @endverbatim
+ @internal
+ Depending on the device voltage range, the maximum frequency should be
+ adapted accordingly:
+ (++) +------------------------------------------------------------------------------------------------+
+ (++) | Wait states | HCLK clock frequency (MHz) |
+ (++) | |-------------------------------------------------------------------------------|
+ (++) | (Latency) | voltage range | voltage range | voltage range | voltage range |
+ (++) | | 2.7V - 3.6V | 2.4V - 2.7V | 2.1V - 2.7V | 1.8V - 2.1V |
+ (++) |----------------|-------------------|-------------------|-------------------|-------------------|
+ (++) |0WS(1CPU cycle) | 0 < HCLK <= 30 | 0 < HCLK <= 24 | 0 < HCLK <= 22 | 0 < HCLK <= 20 |
+ (++) |----------------|-------------------|-------------------|-------------------|-------------------|
+ (++) |1WS(2CPU cycle) | 30 < HCLK <= 60 | 24 < HCLK <= 48 | 22 < HCLK <= 44 | 20 < HCLK <= 44 |
+ (++) |----------------|-------------------|-------------------|-------------------|-------------------|
+ (++) |2WS(3CPU cycle) | 60 < HCLK <= 90 | 48 < HCLK <= 72 | 44 < HCLK <= 66 | 40 < HCLK <= 60 |
+ (++) |----------------|-------------------|-------------------|-------------------|-------------------|
+ (++) |3WS(4CPU cycle) | 90 < HCLK <= 120 | 72 < HCLK <= 96 | 66 < HCLK <= 88 | 60 < HCLK <= 80 |
+ (++) |----------------|-------------------|-------------------|-------------------|-------------------|
+ (++) |4WS(5CPU cycle) | 120 < HCLK <= 150 | 96 < HCLK <= 120 | 88 < HCLK <= 110 | 80 < HCLK <= 100 |
+ (++) |----------------|-------------------|-------------------|-------------------|-------------------|
+ (++) |5WS(6CPU cycle) | 150 < HCLK <= 180 | 120 < HCLK <= 144 | 110 < HCLK <= 132 | 100 < HCLK <= 120 |
+ (++) |----------------|-------------------|-------------------|-------------------|-------------------|
+ (++) |6WS(7CPU cycle) | 180 < HCLK <= 210 | 144 < HCLK <= 168 | 132 < HCLK <= 154 | 120 < HCLK <= 140 |
+ (++) |----------------|-------------------|-------------------|-------------------|-------------------|
+ (++) |7WS(8CPU cycle) | 210 < HCLK <= 216 | 168 < HCLK <= 192 | 154 < HCLK <= 176 | 140 < HCLK <= 160 |
+ (++) |----------------|-------------------|-------------------|-------------------|-------------------|
+ (++) |8WS(9CPU cycle) | -- | 192 < HCLK <= 216 | 176 < HCLK <= 198 | 160 < HCLK <= 180 |
+ (++) |----------------|-------------------|-------------------|-------------------|-------------------|
+ (++) |9WS(10CPU cycle)| -- | -- | 198 < HCLK <= 216 | -- |
+ (++) +------------------------------------------------------------------------------------------------+
+
+ @endinternal
+ * @{
+ */
+
+/**
+ * @brief This function sets directly SystemCoreClock CMSIS variable.
+ * @note Variable can be calculated also through SystemCoreClockUpdate function.
+ * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro)
+ * @retval None
+ */
+void LL_SetSystemCoreClock(uint32_t HCLKFrequency)
+{
+ /* HCLK clock frequency */
+ SystemCoreClock = HCLKFrequency;
+}
+
+/**
+ * @brief This function configures system clock at maximum frequency with HSI as clock source of the PLL
+ * @note The application need to ensure that PLL is disabled.
+ * @note Function is based on the following formula:
+ * - PLL output frequency = (((HSI frequency / PLLM) * PLLN) / PLLP)
+ * - PLLM: ensure that the VCO input frequency ranges from 0.95 to 2.1 MHz (PLLVCO_input = HSI frequency / PLLM)
+ * - PLLN: ensure that the VCO output frequency is between 100 and 432 MHz (PLLVCO_output = PLLVCO_input * PLLN)
+ * - PLLP: ensure that max frequency at 216000000 Hz is reach (PLLVCO_output / PLLP)
+ * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains
+ * the configuration information for the PLL.
+ * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains
+ * the configuration information for the BUS prescalers.
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: Max frequency configuration done
+ * - ERROR: Max frequency configuration not done
+ */
+ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
+ LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct)
+{
+ ErrorStatus status = SUCCESS;
+ uint32_t pllfreq = 0U;
+
+ /* Check if one of the PLL is enabled */
+ if(UTILS_PLL_IsBusy() == SUCCESS)
+ {
+ /* Calculate the new PLL output frequency */
+ pllfreq = UTILS_GetPLLOutputFrequency(HSI_VALUE, UTILS_PLLInitStruct);
+
+ /* Enable HSI if not enabled */
+ if(LL_RCC_HSI_IsReady() != 1U)
+ {
+ LL_RCC_HSI_Enable();
+ while (LL_RCC_HSI_IsReady() != 1U)
+ {
+ /* Wait for HSI ready */
+ }
+ }
+
+ /* Configure PLL */
+ LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN,
+ UTILS_PLLInitStruct->PLLP);
+
+ /* Enable PLL and switch system clock to PLL */
+ status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct);
+ }
+ else
+ {
+ /* Current PLL configuration cannot be modified */
+ status = ERROR;
+ }
+
+ return status;
+}
+
+/**
+ * @brief This function configures system clock with HSE as clock source of the PLL
+ * @note The application need to ensure that PLL is disabled.
+ * @note Function is based on the following formula:
+ * - PLL output frequency = (((HSE frequency / PLLM) * PLLN) / PLLP)
+ * - PLLM: ensure that the VCO input frequency ranges from 0.95 to 2.10 MHz (PLLVCO_input = HSE frequency / PLLM)
+ * - PLLN: ensure that the VCO output frequency is between 100 and 432 MHz (PLLVCO_output = PLLVCO_input * PLLN)
+ * - PLLP: ensure that max frequency at 216000000 Hz is reached (PLLVCO_output / PLLP)
+ * @param HSEFrequency Value between Min_Data = 4000000 and Max_Data = 26000000
+ * @param HSEBypass This parameter can be one of the following values:
+ * @arg @ref LL_UTILS_HSEBYPASS_ON
+ * @arg @ref LL_UTILS_HSEBYPASS_OFF
+ * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains
+ * the configuration information for the PLL.
+ * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains
+ * the configuration information for the BUS prescalers.
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: Max frequency configuration done
+ * - ERROR: Max frequency configuration not done
+ */
+ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass,
+ LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct)
+{
+ ErrorStatus status = SUCCESS;
+ uint32_t pllfreq = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_LL_UTILS_HSE_FREQUENCY(HSEFrequency));
+ assert_param(IS_LL_UTILS_HSE_BYPASS(HSEBypass));
+
+ /* Check if one of the PLL is enabled */
+ if(UTILS_PLL_IsBusy() == SUCCESS)
+ {
+ /* Calculate the new PLL output frequency */
+ pllfreq = UTILS_GetPLLOutputFrequency(HSEFrequency, UTILS_PLLInitStruct);
+
+ /* Enable HSE if not enabled */
+ if(LL_RCC_HSE_IsReady() != 1U)
+ {
+ /* Check if need to enable HSE bypass feature or not */
+ if(HSEBypass == LL_UTILS_HSEBYPASS_ON)
+ {
+ LL_RCC_HSE_EnableBypass();
+ }
+ else
+ {
+ LL_RCC_HSE_DisableBypass();
+ }
+
+ /* Enable HSE */
+ LL_RCC_HSE_Enable();
+ while (LL_RCC_HSE_IsReady() != 1U)
+ {
+ /* Wait for HSE ready */
+ }
+ }
+
+ /* Configure PLL */
+ LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN,
+ UTILS_PLLInitStruct->PLLP);
+
+ /* Enable PLL and switch system clock to PLL */
+ status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct);
+ }
+ else
+ {
+ /* Current PLL configuration cannot be modified */
+ status = ERROR;
+ }
+
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup UTILS_LL_Private_Functions
+ * @{
+ */
+/**
+ * @brief Update number of Flash wait states in line with new frequency and current
+ voltage range.
+ * @note This Function support ONLY devices with supply voltage (voltage range) between 2.7V and 3.6V
+ * @param HCLK_Frequency HCLK frequency
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: Latency has been modified
+ * - ERROR: Latency cannot be modified
+ */
+static ErrorStatus UTILS_SetFlashLatency(uint32_t HCLK_Frequency)
+{
+ ErrorStatus status = SUCCESS;
+
+ uint32_t latency = LL_FLASH_LATENCY_0; /* default value 0WS */
+
+ /* Frequency cannot be equal to 0 */
+ if(HCLK_Frequency == 0U)
+ {
+ status = ERROR;
+ }
+ else
+ {
+ if(LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1)
+ {
+ if(LL_PWR_IsEnabledOverDriveMode() != 0U)
+ {
+ if(HCLK_Frequency > UTILS_SCALE1_LATENCY7_FREQ)
+ {
+ /* 210 < HCLK <= 216 => 7WS (8 CPU cycles) */
+ latency = LL_FLASH_LATENCY_7;
+ }
+ else /* (HCLK_Frequency > UTILS_SCALE1_LATENCY6_FREQ) */
+ {
+ /* 180 < HCLK <= 210 => 6WS (7 CPU cycles) */
+ latency = LL_FLASH_LATENCY_6;
+ }
+ }
+ if((HCLK_Frequency > UTILS_SCALE1_LATENCY5_FREQ) && (latency == LL_FLASH_LATENCY_0))
+ {
+ /* 150 < HCLK <= 180 => 5WS (6 CPU cycles) */
+ latency = LL_FLASH_LATENCY_5;
+ }
+ else if((HCLK_Frequency > UTILS_SCALE1_LATENCY4_FREQ) && (latency == LL_FLASH_LATENCY_0))
+ {
+ /* 120 < HCLK <= 150 => 4WS (5 CPU cycles) */
+ latency = LL_FLASH_LATENCY_4;
+ }
+ else if((HCLK_Frequency > UTILS_SCALE1_LATENCY3_FREQ) && (latency == LL_FLASH_LATENCY_0))
+ {
+ /* 90 < HCLK <= 120 => 3WS (4 CPU cycles) */
+ latency = LL_FLASH_LATENCY_3;
+ }
+ else if((HCLK_Frequency > UTILS_SCALE1_LATENCY2_FREQ) && (latency == LL_FLASH_LATENCY_0))
+ {
+ /* 60 < HCLK <= 90 => 2WS (3 CPU cycles) */
+ latency = LL_FLASH_LATENCY_2;
+ }
+ else
+ {
+ if((HCLK_Frequency > UTILS_SCALE1_LATENCY1_FREQ) && (latency == LL_FLASH_LATENCY_0))
+ {
+ /* 30 < HCLK <= 60 => 1WS (2 CPU cycles) */
+ latency = LL_FLASH_LATENCY_1;
+ }
+ /* else HCLK_Frequency < 30MHz default LL_FLASH_LATENCY_0 0WS */
+ }
+ }
+ else if(LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE2)
+ {
+ if(HCLK_Frequency > UTILS_SCALE2_LATENCY5_FREQ)
+ {
+ /* 150 < HCLK <= 168 OR 150 < HCLK <= 180 (when OverDrive mode is enable) => 5WS (6 CPU cycles) */
+ latency = LL_FLASH_LATENCY_5;
+ }
+ else if(HCLK_Frequency > UTILS_SCALE2_LATENCY4_FREQ)
+ {
+ /* 120 < HCLK <= 150 => 4WS (5 CPU cycles) */
+ latency = LL_FLASH_LATENCY_4;
+ }
+ else if(HCLK_Frequency > UTILS_SCALE2_LATENCY3_FREQ)
+ {
+ /* 90 < HCLK <= 120 => 3WS (4 CPU cycles) */
+ latency = LL_FLASH_LATENCY_3;
+ }
+ else if(HCLK_Frequency > UTILS_SCALE2_LATENCY2_FREQ)
+ {
+ /* 60 < HCLK <= 90 => 2WS (3 CPU cycles) */
+ latency = LL_FLASH_LATENCY_2;
+ }
+ else
+ {
+ if(HCLK_Frequency > UTILS_SCALE2_LATENCY1_FREQ)
+ {
+ /* 30 < HCLK <= 60 => 1WS (2 CPU cycles) */
+ latency = LL_FLASH_LATENCY_1;
+ }
+ /* else HCLK_Frequency < 24MHz default LL_FLASH_LATENCY_0 0WS */
+ }
+ }
+ else /* Scale 3 */
+ {
+ if(HCLK_Frequency > UTILS_SCALE3_LATENCY4_FREQ)
+ {
+ /* 120 < HCLK <= 144 => 4WS (5 CPU cycles) */
+ latency = LL_FLASH_LATENCY_4;
+ }
+ else if(HCLK_Frequency > UTILS_SCALE3_LATENCY3_FREQ)
+ {
+ /* 90 < HCLK <= 120 => 3WS (4 CPU cycles) */
+ latency = LL_FLASH_LATENCY_3;
+ }
+ else if(HCLK_Frequency > UTILS_SCALE3_LATENCY2_FREQ)
+ {
+ /* 60 < HCLK <= 90 => 2WS (3 CPU cycles) */
+ latency = LL_FLASH_LATENCY_2;
+ }
+ else
+ {
+ if(HCLK_Frequency > UTILS_SCALE3_LATENCY1_FREQ)
+ {
+ /* 30 < HCLK <= 60 => 1WS (2 CPU cycles) */
+ latency = LL_FLASH_LATENCY_1;
+ }
+ /* else HCLK_Frequency < 22MHz default LL_FLASH_LATENCY_0 0WS */
+ }
+ }
+
+ LL_FLASH_SetLatency(latency);
+
+ /* Check that the new number of wait states is taken into account to access the Flash
+ memory by reading the FLASH_ACR register */
+ if(LL_FLASH_GetLatency() != latency)
+ {
+ status = ERROR;
+ }
+ }
+ return status;
+}
+
+/**
+ * @brief Function to check that PLL can be modified
+ * @param PLL_InputFrequency PLL input frequency (in Hz)
+ * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains
+ * the configuration information for the PLL.
+ * @retval PLL output frequency (in Hz)
+ */
+static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct)
+{
+ uint32_t pllfreq = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_LL_UTILS_PLLM_VALUE(UTILS_PLLInitStruct->PLLM));
+ assert_param(IS_LL_UTILS_PLLN_VALUE(UTILS_PLLInitStruct->PLLN));
+ assert_param(IS_LL_UTILS_PLLP_VALUE(UTILS_PLLInitStruct->PLLP));
+
+ /* Check different PLL parameters according to RM */
+ /* - PLLM: ensure that the VCO input frequency ranges from 0.95 to 2.1 MHz. */
+ pllfreq = PLL_InputFrequency / (UTILS_PLLInitStruct->PLLM & (RCC_PLLCFGR_PLLM >> RCC_PLLCFGR_PLLM_Pos));
+ assert_param(IS_LL_UTILS_PLLVCO_INPUT(pllfreq));
+
+ /* - PLLN: ensure that the VCO output frequency is between 100 and 432 MHz.*/
+ pllfreq = pllfreq * (UTILS_PLLInitStruct->PLLN & (RCC_PLLCFGR_PLLN >> RCC_PLLCFGR_PLLN_Pos));
+ assert_param(IS_LL_UTILS_PLLVCO_OUTPUT(pllfreq));
+
+ /* - PLLP: ensure that max frequency at 216000000 Hz is reached */
+ pllfreq = pllfreq / (((UTILS_PLLInitStruct->PLLP >> RCC_PLLCFGR_PLLP_Pos) + 1) * 2);
+ assert_param(IS_LL_UTILS_PLL_FREQUENCY(pllfreq));
+
+ return pllfreq;
+}
+
+/**
+ * @brief Function to check that PLL can be modified
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: PLL modification can be done
+ * - ERROR: PLL is busy
+ */
+static ErrorStatus UTILS_PLL_IsBusy(void)
+{
+ ErrorStatus status = SUCCESS;
+
+ /* Check if PLL is busy*/
+ if(LL_RCC_PLL_IsReady() != 0U)
+ {
+ /* PLL configuration cannot be modified */
+ status = ERROR;
+ }
+
+ /* Check if PLLSAI is busy*/
+ if(LL_RCC_PLLSAI_IsReady() != 0U)
+ {
+ /* PLLSAI1 configuration cannot be modified */
+ status = ERROR;
+ }
+ /* Check if PLLI2S is busy*/
+ if(LL_RCC_PLLI2S_IsReady() != 0U)
+ {
+ /* PLLI2S configuration cannot be modified */
+ status = ERROR;
+ }
+ return status;
+}
+
+/**
+ * @brief Function to enable PLL and switch system clock to PLL
+ * @param SYSCLK_Frequency SYSCLK frequency
+ * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains
+ * the configuration information for the BUS prescalers.
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: No problem to switch system to PLL
+ * - ERROR: Problem to switch system to PLL
+ */
+static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct)
+{
+ ErrorStatus status = SUCCESS;
+ uint32_t hclk_frequency = 0U;
+
+ assert_param(IS_LL_UTILS_SYSCLK_DIV(UTILS_ClkInitStruct->AHBCLKDivider));
+ assert_param(IS_LL_UTILS_APB1_DIV(UTILS_ClkInitStruct->APB1CLKDivider));
+ assert_param(IS_LL_UTILS_APB2_DIV(UTILS_ClkInitStruct->APB2CLKDivider));
+
+ /* Calculate HCLK frequency */
+ hclk_frequency = __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, UTILS_ClkInitStruct->AHBCLKDivider);
+
+ /* Increasing the number of wait states because of higher CPU frequency */
+ if(SystemCoreClock < hclk_frequency)
+ {
+ /* Set FLASH latency to highest latency */
+ status = UTILS_SetFlashLatency(hclk_frequency);
+ }
+
+ /* Update system clock configuration */
+ if(status == SUCCESS)
+ {
+ /* Enable PLL */
+ LL_RCC_PLL_Enable();
+ while (LL_RCC_PLL_IsReady() != 1U)
+ {
+ /* Wait for PLL ready */
+ }
+
+ /* Sysclk activation on the main PLL */
+ LL_RCC_SetAHBPrescaler(UTILS_ClkInitStruct->AHBCLKDivider);
+ LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+ while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+ {
+ /* Wait for system clock switch to PLL */
+ }
+
+ /* Set APB1 & APB2 prescaler*/
+ LL_RCC_SetAPB1Prescaler(UTILS_ClkInitStruct->APB1CLKDivider);
+ LL_RCC_SetAPB2Prescaler(UTILS_ClkInitStruct->APB2CLKDivider);
+ }
+
+ /* Decreasing the number of wait states because of lower CPU frequency */
+ if(SystemCoreClock > hclk_frequency)
+ {
+ /* Set FLASH latency to lowest latency */
+ status = UTILS_SetFlashLatency(hclk_frequency);
+ }
+
+ /* Update SystemCoreClock variable */
+ if(status == SUCCESS)
+ {
+ LL_SetSystemCoreClock(hclk_frequency);
+ }
+
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/stm32f7xx_hal_conf.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/stm32f7xx_hal_conf.h
new file mode 100644
index 00000000..fb2a08f2
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/stm32f7xx_hal_conf.h
@@ -0,0 +1,458 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_conf.h
+ * @brief HAL configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2019 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_CONF_H
+#define __STM32F7xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+
+/* #define HAL_ADC_MODULE_ENABLED */
+/* #define HAL_CRYP_MODULE_ENABLED */
+/* #define HAL_CAN_MODULE_ENABLED */
+/* #define HAL_CEC_MODULE_ENABLED */
+/* #define HAL_CRC_MODULE_ENABLED */
+/* #define HAL_CRYP_MODULE_ENABLED */
+/* #define HAL_DAC_MODULE_ENABLED */
+/* #define HAL_DCMI_MODULE_ENABLED */
+/* #define HAL_DMA2D_MODULE_ENABLED */
+#define HAL_ETH_MODULE_ENABLED
+/* #define HAL_NAND_MODULE_ENABLED */
+/* #define HAL_NOR_MODULE_ENABLED */
+/* #define HAL_SRAM_MODULE_ENABLED */
+/* #define HAL_SDRAM_MODULE_ENABLED */
+/* #define HAL_HASH_MODULE_ENABLED */
+/* #define HAL_I2S_MODULE_ENABLED */
+/* #define HAL_IWDG_MODULE_ENABLED */
+/* #define HAL_LPTIM_MODULE_ENABLED */
+/* #define HAL_LTDC_MODULE_ENABLED */
+/* #define HAL_QSPI_MODULE_ENABLED */
+/* #define HAL_RNG_MODULE_ENABLED */
+/* #define HAL_RTC_MODULE_ENABLED */
+/* #define HAL_SAI_MODULE_ENABLED */
+/* #define HAL_SD_MODULE_ENABLED */
+/* #define HAL_MMC_MODULE_ENABLED */
+/* #define HAL_SPDIFRX_MODULE_ENABLED */
+/* #define HAL_SPI_MODULE_ENABLED */
+/* #define HAL_TIM_MODULE_ENABLED */
+/* #define HAL_UART_MODULE_ENABLED */
+/* #define HAL_USART_MODULE_ENABLED */
+/* #define HAL_IRDA_MODULE_ENABLED */
+/* #define HAL_SMARTCARD_MODULE_ENABLED */
+/* #define HAL_WWDG_MODULE_ENABLED */
+/* #define HAL_PCD_MODULE_ENABLED */
+/* #define HAL_HCD_MODULE_ENABLED */
+/* #define HAL_DFSDM_MODULE_ENABLED */
+/* #define HAL_DSI_MODULE_ENABLED */
+/* #define HAL_JPEG_MODULE_ENABLED */
+/* #define HAL_MDIOS_MODULE_ENABLED */
+/* #define HAL_SMBUS_MODULE_ENABLED */
+/* #define HAL_MMC_MODULE_ENABLED */
+/* #define HAL_EXTI_MODULE_ENABLED */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief External clock source for I2S peripheral
+ * This value is used by the I2S HAL module to compute the I2S clock source
+ * frequency, this source is inserted directly through I2S_CKIN pad.
+ */
+#if !defined (EXTERNAL_CLOCK_VALUE)
+ #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
+#define USE_RTOS 0U
+#define PREFETCH_ENABLE 0U
+#define ART_ACCLERATOR_ENABLE 0U /* To enable instruction cache and prefetch */
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0 2U
+#define MAC_ADDR1 0U
+#define MAC_ADDR2 0U
+#define MAC_ADDR3 0U
+#define MAC_ADDR4 0U
+#define MAC_ADDR5 0U
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
+#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
+#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
+#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
+
+/* Section 2: PHY configuration section */
+
+/* LAN8742A_PHY_ADDRESS Address*/
+#define LAN8742A_PHY_ADDRESS 0
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
+
+#define PHY_READ_TO ((uint32_t)0x0000FFFFU)
+#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR ((uint16_t)0x00U) /*!< Transceiver Basic Control Register */
+#define PHY_BSR ((uint16_t)0x01U) /*!< Transceiver Basic Status Register */
+
+#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
+#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
+#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
+#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
+#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
+#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
+#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
+
+#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
+#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
+#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
+
+/* Section 4: Extended PHY Registers */
+#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
+
+#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
+#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
+
+#define PHY_ISFR ((uint16_t)0x000BU) /*!< PHY Interrupt Source Flag register Offset */
+#define PHY_ISFR_INT4 ((uint16_t)0x000BU) /*!< PHY Link down inturrupt */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC 0U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f7xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+ #include "stm32f7xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f7xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f7xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f7xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f7xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f7xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f7xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f7xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+ #include "stm32f7xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+ #include "stm32f7xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f7xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+ #include "stm32f7xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+ #include "stm32f7xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f7xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32f7xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32f7xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32f7xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+ #include "stm32f7xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f7xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f7xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f7xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f7xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f7xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f7xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f7xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f7xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f7xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f7xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f7xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f7xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32f7xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f7xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f7xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f7xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f7xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f7xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f7xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f7xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f7xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f7xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f7xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32f7xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f7xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_JPEG_MODULE_ENABLED
+ #include "stm32f7xx_hal_jpeg.h"
+#endif /* HAL_JPEG_MODULE_ENABLED */
+
+#ifdef HAL_MDIOS_MODULE_ENABLED
+ #include "stm32f7xx_hal_mdios.h"
+#endif /* HAL_MDIOS_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f7xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/system_stm32f7xx.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/system_stm32f7xx.c
new file mode 100644
index 00000000..cb4e5662
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/system_stm32f7xx.c
@@ -0,0 +1,278 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f7xx.c
+ * @author MCD Application Team
+ * @brief CMSIS Cortex-M7 Device Peripheral Access Layer System Source File.
+ *
+ * This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f7xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f7xx_system
+ * @{
+ */
+
+/** @addtogroup STM32F7xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32f7xx.h"
+
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F7xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F7xx_System_Private_Defines
+ * @{
+ */
+
+/************************* Miscellaneous Configuration ************************/
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F7xx_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F7xx_System_Private_Variables
+ * @{
+ */
+
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+ uint32_t SystemCoreClock = 16000000;
+ const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+ const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F7xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F7xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system
+ * Initialize the Embedded Flash Interface, the PLL and update the
+ * SystemFrequency variable.
+ * @param None
+ * @retval None
+ */
+void SystemInit(void)
+{
+ /* FPU settings ------------------------------------------------------------*/
+ #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
+ #endif
+ /* Reset the RCC clock configuration to the default reset state ------------*/
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001;
+
+ /* Reset CFGR register */
+ RCC->CFGR = 0x00000000;
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+ /* Reset PLLCFGR register */
+ RCC->PLLCFGR = 0x24003010;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /* Disable all interrupts */
+ RCC->CIR = 0x00000000;
+
+ /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = RAMDTCM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f7xx_hal_conf.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f7xx_hal_conf.h file (default value
+ * 25 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate(void)
+{
+ uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case 0x00: /* HSI used as system clock source */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case 0x04: /* HSE used as system clock source */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case 0x08: /* PLL used as system clock source */
+
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+ SYSCLK = PLL_VCO / PLL_P
+ */
+ pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+ pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+
+ if (pllsource != 0)
+ {
+ /* HSE used as PLL clock source */
+ pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+ else
+ {
+ /* HSI used as PLL clock source */
+ pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+
+ pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+ SystemCoreClock = pllvco/pllp;
+ break;
+ default:
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+ /* Compute HCLK frequency --------------------------------------------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK frequency */
+ SystemCoreClock >>= tmp;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/uip/clock-arch.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/uip/clock-arch.c
new file mode 100644
index 00000000..1e213136
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/uip/clock-arch.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2006, Swedish Institute of Computer Science.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the uIP TCP/IP stack
+ *
+ * $Id: clock-arch.c,v 1.2 2006/06/12 08:00:31 adam Exp $
+ */
+
+/**
+ * \file
+ * Implementation of architecture-specific clock functionality
+ * \author
+ * Adam Dunkels
+ */
+
+#include "clock-arch.h"
+#include "boot.h"
+
+/*---------------------------------------------------------------------------*/
+clock_time_t
+clock_time(void)
+{
+ return (clock_time_t)TimerGet();
+}
+/*---------------------------------------------------------------------------*/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/uip/clock-arch.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/uip/clock-arch.h
new file mode 100644
index 00000000..aa97f0e7
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/uip/clock-arch.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2006, Swedish Institute of Computer Science.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the uIP TCP/IP stack
+ *
+ * $Id: clock-arch.h,v 1.2 2006/06/12 08:00:31 adam Exp $
+ */
+
+#ifndef __CLOCK_ARCH_H__
+#define __CLOCK_ARCH_H__
+
+typedef int clock_time_t;
+#define CLOCK_CONF_SECOND 1000
+
+#endif /* __CLOCK_ARCH_H__ */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/uip/netdev.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/uip/netdev.c
new file mode 100644
index 00000000..7e696c54
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/uip/netdev.c
@@ -0,0 +1,294 @@
+/*
+ * Copyright (c) 2001, Swedish Institute of Computer Science.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of the Institute nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Author: Adam Dunkels
+ *
+ * $Id: netdev.c,v 1.8 2006/06/07 08:39:58 adam Exp $
+ */
+
+
+/*---------------------------------------------------------------------------*/
+#include
+#include "uip.h"
+#include "uip_arp.h"
+#include "boot.h"
+#include "stm32f7xx.h" /* STM32 CPU and HAL header */
+
+
+/*---------------------------------------------------------------------------*/
+#define NETDEV_DEFAULT_MACADDR0 (0x08)
+#define NETDEV_DEFAULT_MACADDR1 (0x00)
+#define NETDEV_DEFAULT_MACADDR2 (0x27)
+#define NETDEV_DEFAULT_MACADDR3 (0x69)
+#define NETDEV_DEFAULT_MACADDR4 (0x5B)
+#define NETDEV_DEFAULT_MACADDR5 (0x45)
+
+/* Timeout time for transmitting a packet. */
+#define NETDEV_TX_PACKET_TIMEOUT_MS (250u)
+
+
+/*---------------------------------------------------------------------------*/
+ETH_HandleTypeDef heth;
+
+
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+#endif
+__ALIGN_BEGIN ETH_DMADescTypeDef DMARxDscrTab[ETH_RXBUFNB] __ALIGN_END;/* Ethernet Rx MA Descriptor */
+
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+#endif
+__ALIGN_BEGIN ETH_DMADescTypeDef DMATxDscrTab[ETH_TXBUFNB] __ALIGN_END;/* Ethernet Tx DMA Descriptor */
+
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+#endif
+__ALIGN_BEGIN uint8_t Rx_Buff[ETH_RXBUFNB][ETH_RX_BUF_SIZE] __ALIGN_END; /* Ethernet Receive Buffer */
+
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+#endif
+__ALIGN_BEGIN uint8_t Tx_Buff[ETH_TXBUFNB][ETH_TX_BUF_SIZE] __ALIGN_END; /* Ethernet Transmit Buffer */
+
+
+/*---------------------------------------------------------------------------*/
+static struct uip_eth_addr macAddress;
+
+
+/*---------------------------------------------------------------------------*/
+void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
+{
+ GPIO_InitTypeDef GPIO_InitStruct;
+
+ if (heth->Instance == ETH)
+ {
+ /* Ethernet clock enable */
+ __HAL_RCC_ETH_CLK_ENABLE();
+
+ /* ETH GPIO Configuration:
+ * PC1 ------> ETH_MDC
+ * PA1 ------> ETH_REF_CLK
+ * PA2 ------> ETH_MDIO
+ * PA7 ------> ETH_CRS_DV
+ * PC4 ------> ETH_RXD0
+ * PC5 ------> ETH_RXD1
+ * PB13 ------> ETH_TXD1
+ * PG11 ------> ETH_TX_EN
+ * PG13 ------> ETH_TXD0
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_1 | GPIO_PIN_4 | GPIO_PIN_5;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
+ HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+ GPIO_InitStruct.Pin = GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_7;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+ GPIO_InitStruct.Pin = GPIO_PIN_13;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+ GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_13;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
+ HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
+ }
+}
+
+
+/*---------------------------------------------------------------------------*/
+void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
+{
+ if (heth->Instance == ETH)
+ {
+ /* Ethernet clock disable */
+ __HAL_RCC_ETH_CLK_DISABLE();
+
+ /* Reset Ethernet GPIO pin configuration. */
+ HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1 | GPIO_PIN_4 | GPIO_PIN_5);
+ HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_7);
+ HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13);
+ HAL_GPIO_DeInit(GPIOG, GPIO_PIN_11 | GPIO_PIN_13);
+ }
+}
+
+
+/*---------------------------------------------------------------------------*/
+void netdev_init(void)
+{
+ /* Store the default MAC address. */
+ macAddress.addr[0] = NETDEV_DEFAULT_MACADDR0;
+ macAddress.addr[1] = NETDEV_DEFAULT_MACADDR1;
+ macAddress.addr[2] = NETDEV_DEFAULT_MACADDR2;
+ macAddress.addr[3] = NETDEV_DEFAULT_MACADDR3;
+ macAddress.addr[4] = NETDEV_DEFAULT_MACADDR4;
+ macAddress.addr[5] = NETDEV_DEFAULT_MACADDR5;
+
+ /* Initialize Ethernet. */
+ heth.Instance = ETH;
+ heth.Init.AutoNegotiation = ETH_AUTONEGOTIATION_ENABLE;
+ heth.Init.PhyAddress = LAN8742A_PHY_ADDRESS;
+ heth.Init.MACAddr = &(macAddress.addr)[0];
+ heth.Init.RxMode = ETH_RXPOLLING_MODE;
+ heth.Init.ChecksumMode = ETH_CHECKSUM_BY_HARDWARE;
+ heth.Init.MediaInterface = ETH_MEDIA_INTERFACE_RMII;
+ (void)HAL_ETH_Init(&heth);
+
+ /* Initialize Tx Descriptors list: Chain Mode */
+ HAL_ETH_DMATxDescListInit(&heth, DMATxDscrTab, &Tx_Buff[0][0], ETH_TXBUFNB);
+ /* Initialize Rx Descriptors list: Chain Mode */
+ HAL_ETH_DMARxDescListInit(&heth, DMARxDscrTab, &Rx_Buff[0][0], ETH_RXBUFNB);
+ /* Enable MAC and DMA transmission and reception */
+ HAL_ETH_Start(&heth);
+}
+
+
+/*---------------------------------------------------------------------------*/
+void netdev_init_mac(void)
+{
+ /* Configure the MAC address */
+ uip_setethaddr(macAddress);
+}
+
+
+/*---------------------------------------------------------------------------*/
+void netdev_get_mac(unsigned char * mac_addr)
+{
+ mac_addr[0] = macAddress.addr[0];
+ mac_addr[1] = macAddress.addr[1];
+ mac_addr[2] = macAddress.addr[2];
+ mac_addr[3] = macAddress.addr[3];
+ mac_addr[4] = macAddress.addr[4];
+ mac_addr[5] = macAddress.addr[5];
+}
+
+
+/*---------------------------------------------------------------------------*/
+unsigned int netdev_read(void)
+{
+ unsigned int result = 0;
+ uint16_t len = 0;
+ uint8_t * buffer;
+ __IO ETH_DMADescTypeDef *dmarxdesc;
+
+ /* Check if a new frame was received. */
+ if (HAL_ETH_GetReceivedFrame(&heth) == HAL_OK)
+ {
+ /* Obtain the size of the packet and a pointer to the buffer with packet data. */
+ len = heth.RxFrameInfos.length;
+ buffer = (uint8_t *)heth.RxFrameInfos.buffer;
+ /* Copy the received packet data into the uip buffer. */
+ memcpy(uip_buf, buffer, len);
+ /* Obtain pointer to the reception DMA descriptor. */
+ dmarxdesc = heth.RxFrameInfos.FSRxDesc;
+ /* Give the buffer back to DMA by setting the Own-bit in the reception descriptor. */
+ dmarxdesc->Status |= ETH_DMARXDESC_OWN;
+ /* Clear the segment count. */
+ heth.RxFrameInfos.SegCount =0;
+ /* When reception buffer unavailable flag is set, clear it and resume reception. */
+ if ((heth.Instance->DMASR & ETH_DMASR_RBUS) != (uint32_t)RESET)
+ {
+ /* Clear RBUS ETHERNET DMA flag */
+ heth.Instance->DMASR = ETH_DMASR_RBUS;
+ /* Resume DMA reception */
+ heth.Instance->DMARPDR = 0;
+ }
+ /* Update the result. */
+ result = len;
+ }
+ /* Give the result back to the caller. */
+ return result;
+}
+
+
+/*---------------------------------------------------------------------------*/
+void netdev_send(void)
+{
+ uint8_t * buffer;
+ __IO ETH_DMADescTypeDef *DmaTxDesc;
+ uint32_t framelength;
+ uint32_t timeout;
+ ErrorStatus errorStatus = SUCCESS;
+
+ /* Obtain pointer to the transmission DMA descriptor. */
+ DmaTxDesc = heth.TxDesc;
+ /* Set timeout time to wait for the DMA buffer to become available. */
+ timeout = TimerGet() + NETDEV_TX_PACKET_TIMEOUT_MS;
+ /* Only continue with packet transmission of the buffer is available. */
+ while ((DmaTxDesc->Status & ETH_DMATXDESC_OWN) != (uint32_t)RESET)
+ {
+ CopService();
+ /* Break loop upon timeout. This would indicate a hardware failure. */
+ if (TimerGet() > timeout)
+ {
+ /* Update the error status. */
+ errorStatus = ERROR;
+ break;
+ }
+ }
+ /* Only continue with transmission if not error was detected. */
+ if (errorStatus == SUCCESS)
+ {
+ /* Store the framelength. */
+ framelength = uip_len;
+ /* Obtain pointer to write the packet data to. */
+ buffer = (uint8_t *)(heth.TxDesc->Buffer1Addr);
+ /* Copy the packet data to the buffer. */
+ memcpy(buffer, uip_buf, framelength);
+ /* Prepare transmit descriptors to give to DMA. */
+ HAL_ETH_TransmitFrame(&heth, framelength);
+ }
+
+ /* When Transmit Underflow flag is set, clear it and issue a Transmit Poll Demand to
+ * resume transmission.
+ */
+ if ((heth.Instance->DMASR & ETH_DMASR_TUS) != (uint32_t)RESET)
+ {
+ /* Clear TUS ETHERNET DMA flag. */
+ heth.Instance->DMASR = ETH_DMASR_TUS;
+ /* Resume DMA transmission. */
+ heth.Instance->DMATPDR = 0;
+ }
+}
+
+
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/uip/netdev.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/uip/netdev.h
new file mode 100644
index 00000000..832524d6
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/uip/netdev.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2001, Adam Dunkels.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by Adam Dunkels.
+ * 4. The name of the author may not be used to endorse or promote
+ * products derived from this software without specific prior
+ * written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * This file is part of the uIP TCP/IP stack.
+ *
+ * $Id: netdev.h,v 1.1 2002/01/10 06:22:56 adam Exp $
+ *
+ */
+
+#ifndef __NETDEV_H__
+#define __NETDEV_H__
+
+void netdev_init(void);
+void netdev_init_mac(void);
+void netdev_get_mac(unsigned char * mac_addr);
+unsigned int netdev_read(void);
+void netdev_send(void);
+
+#endif /* __NETDEV_H__ */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/uip/uip-conf.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/uip/uip-conf.h
new file mode 100644
index 00000000..4b1cfcc6
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/lib/uip/uip-conf.h
@@ -0,0 +1,160 @@
+/**
+ * \addtogroup uipopt
+ * @{
+ */
+
+/**
+ * \name Project-specific configuration options
+ * @{
+ *
+ * uIP has a number of configuration options that can be overridden
+ * for each project. These are kept in a project-specific uip-conf.h
+ * file and all configuration names have the prefix UIP_CONF.
+ */
+
+/*
+ * Copyright (c) 2006, Swedish Institute of Computer Science.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the uIP TCP/IP stack
+ *
+ * $Id: uip-conf.h,v 1.6 2006/06/12 08:00:31 adam Exp $
+ */
+
+/**
+ * \file
+ * An example uIP configuration file
+ * \author
+ * Adam Dunkels
+ */
+
+#ifndef __UIP_CONF_H__
+#define __UIP_CONF_H__
+
+
+/**
+ * 8 bit datatype
+ *
+ * This typedef defines the 8-bit type used throughout uIP.
+ *
+ * \hideinitializer
+ */
+typedef unsigned char u8_t;
+
+/**
+ * 16 bit datatype
+ *
+ * This typedef defines the 16-bit type used throughout uIP.
+ *
+ * \hideinitializer
+ */
+typedef unsigned short u16_t;
+
+/**
+ * Statistics datatype
+ *
+ * This typedef defines the dataype used for keeping statistics in
+ * uIP.
+ *
+ * \hideinitializer
+ */
+typedef unsigned short uip_stats_t;
+
+/**
+ * Maximum number of TCP connections.
+ *
+ * \hideinitializer
+ */
+#define UIP_CONF_MAX_CONNECTIONS 1
+
+/**
+ * Maximum number of listening TCP ports.
+ *
+ * \hideinitializer
+ */
+#define UIP_CONF_MAX_LISTENPORTS 1
+
+/**
+ * UDP support on or off
+ *
+ * \hideinitializer
+ */
+#define UIP_CONF_UDP 1
+
+/**
+ * UDP Maximum Connections
+ *
+ * \hideinitializer
+ */
+#define UIP_CONF_UDP_CONNS 1
+
+/**
+ * UDP checksums on or off
+ *
+ * \hideinitializer
+ */
+#define UIP_CONF_UDP_CHECKSUMS 0
+
+/**
+ * uIP buffer size.
+ *
+ * \hideinitializer
+ */
+#define UIP_CONF_BUFFER_SIZE 1600
+
+/**
+ * CPU byte order.
+ *
+ * \hideinitializer
+ */
+#define UIP_CONF_BYTE_ORDER UIP_LITTLE_ENDIAN
+
+/**
+ * Logging on or off
+ *
+ * \hideinitializer
+ */
+#define UIP_CONF_LOGGING 0
+
+/**
+ * uIP statistics on or off
+ *
+ * \hideinitializer
+ */
+#define UIP_CONF_STATISTICS 0
+
+
+/* Here we include the header file for the application(s) we use in
+ our project. */
+#include "boot.h"
+#include "net.h"
+#include "dhcpc.h"
+
+#endif /* __UIP_CONF_H__ */
+
+/** @} */
+/** @} */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/main.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/main.c
new file mode 100644
index 00000000..5ad2f159
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/main.c
@@ -0,0 +1,265 @@
+/************************************************************************************//**
+* \file Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/main.c
+* \brief Bootloader application source file.
+* \ingroup Boot_ARMCM7_STM32F7_Nucleo_F767ZI_Keil
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2019 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+
+/****************************************************************************************
+* Include files
+****************************************************************************************/
+#include "boot.h" /* bootloader generic header */
+#include "stm32f7xx.h" /* STM32 CPU and HAL header */
+#include "shared_params.h" /* Shared parameters header */
+
+
+/****************************************************************************************
+* Function prototypes
+****************************************************************************************/
+static void Init(void);
+static void SystemClock_Config(void);
+
+
+/************************************************************************************//**
+** \brief This is the entry point for the bootloader application and is called
+** by the reset interrupt vector after the C-startup routines executed.
+** \return Program return code.
+**
+****************************************************************************************/
+int main(void)
+{
+ blt_int8u deferredInitRequestFlag = 0;
+
+ /* initialize the microcontroller */
+ Init();
+ /* initialize the shared parameters module */
+ SharedParamsInit();
+ /* initialize the bootloader */
+ BootInit();
+#if (BOOT_COM_DEFERRED_INIT_ENABLE == 1)
+ /* the bootloader is configured to NOT initialize the TCP/IP network stack by default
+ * to bypass unnecessary delay times before starting the user program. the TCP/IP net-
+ * work tack is now only initialized when: (a) no valid user program is detected, or
+ * (b) a forced backdoor entry occurred (CpuUserProgramStartHook() returned BLT_FALSE).
+ *
+ * these demo bootloader and user programs have one extra feature implemented for
+ * demonstration purposes. the demo user program can detect firmware update requests
+ * from the TCP/IP network in which case it activates the bootloader. But...the
+ * TCP/IP network stack will not be initialized in this situation. for this reason
+ * the shared parameter module was integrated in both the bootloader and user program.
+ * more information about the shared parameter module can be found here:
+ * https://www.feaser.com/en/blog/?p=216
+ *
+ * the shared parameter at the first index (0) contains a flag. this flag is set to
+ * 1, right before the user program activates this bootloader, to explicitly request
+ * the bootloader to initialize the TCP/IP network stack. this makes it possible for
+ * a firmware update to proceed. the code here reads out this flag and performs the
+ * TCP/IP network stack initialization when requested.
+ */
+ SharedParamsReadByIndex(0, &deferredInitRequestFlag);
+ if (deferredInitRequestFlag == 1)
+ {
+ /* explicitly initialize all communication interface for which the deferred
+ * initialization feature was enabled.
+ */
+ ComDeferredInit();
+ }
+#endif
+
+ /* start the infinite program loop */
+ while (1)
+ {
+ /* run the bootloader task */
+ BootTask();
+ }
+
+ /* program should never get here */
+ return 0;
+} /*** end of main ***/
+
+
+/************************************************************************************//**
+** \brief Initializes the microcontroller.
+** \return none.
+**
+****************************************************************************************/
+static void Init(void)
+{
+ /* HAL library initialization */
+ HAL_Init();
+ /* configure system clock */
+ SystemClock_Config();
+} /*** end of Init ***/
+
+
+/************************************************************************************//**
+** \brief System Clock Configuration. This code was created by CubeMX and configures
+** the system clock to match the configuration in the bootloader's
+** configuration (blt_conf.h), specifically the macros:
+** BOOT_CPU_SYSTEM_SPEED_KHZ and BOOT_CPU_XTAL_SPEED_KHZ.
+** Note that the Lower Layer drivers were selected in CubeMX for the RCC
+** subsystem.
+** \return none.
+**
+****************************************************************************************/
+static void SystemClock_Config(void)
+{
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+
+ /* Configure the main internal regulator output voltage. */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+ /* Initializes the CPU, AHB and APB busses clocks. */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+ RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+ RCC_OscInitStruct.PLL.PLLM = 8;
+ RCC_OscInitStruct.PLL.PLLN = 432;
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+ RCC_OscInitStruct.PLL.PLLQ = 2;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ /* Clock configuration incorrect or hardware failure. Hang the system to prevent
+ * damage.
+ */
+ ASSERT_RT(BLT_FALSE);
+ }
+
+ /* Activate the Over-Drive mode. */
+ if (HAL_PWREx_EnableOverDrive() != HAL_OK)
+ {
+ /* Clock overdrive hardware failure. Hang the system to prevent damage.
+ */
+ ASSERT_RT(BLT_FALSE);
+ }
+
+ /* Initializes the CPU, AHB and APB busses clocks. */
+ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK |
+ RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7) != HAL_OK)
+ {
+ /* Clock configuration incorrect or hardware failure. Hang the system to prevent
+ * damage.
+ */
+ ASSERT_RT(BLT_FALSE);
+ }
+} /*** end of SystemClock_Config ***/
+
+
+/************************************************************************************//**
+** \brief Initializes the Global MSP. This function is called from HAL_Init()
+** function to perform system level initialization (GPIOs, clock, DMA,
+** interrupt).
+** \return none.
+**
+****************************************************************************************/
+void HAL_MspInit(void)
+{
+ GPIO_InitTypeDef GPIO_InitStruct;
+
+ /* Power and SYSCFG clock enable. */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+ /* GPIO ports clock enable. */
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+ __HAL_RCC_GPIOB_CLK_ENABLE();
+ __HAL_RCC_GPIOC_CLK_ENABLE();
+ __HAL_RCC_GPIOD_CLK_ENABLE();
+ __HAL_RCC_GPIOG_CLK_ENABLE();
+
+#if (BOOT_COM_UART_ENABLE > 0)
+ /* UART clock enable. */
+ __HAL_RCC_USART3_CLK_ENABLE();
+#endif
+
+ /* Configure GPIO pin for the LED. */
+ GPIO_InitStruct.Pin = GPIO_PIN_7;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+ HAL_GPIO_WritePin(GPIOB, GPIO_PIN_7, GPIO_PIN_RESET);
+
+ /* Configure GPIO pin for (optional) backdoor entry input. */
+ GPIO_InitStruct.Pin = GPIO_PIN_13;
+ GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+#if (BOOT_COM_UART_ENABLE > 0)
+ /* UART TX and RX GPIO pin configuration. */
+ GPIO_InitStruct.Pin = GPIO_PIN_8 | GPIO_PIN_9;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
+ HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+#endif
+} /*** end of HAL_MspInit ***/
+
+
+/************************************************************************************//**
+** \brief DeInitializes the Global MSP. This function is called from HAL_DeInit()
+** function to perform system level de-initialization (GPIOs, clock, DMA,
+** interrupt).
+** \return none.
+**
+****************************************************************************************/
+void HAL_MspDeInit(void)
+{
+ /* Reset GPIO pin for the LED to turn it off. */
+ HAL_GPIO_WritePin(GPIOB, GPIO_PIN_7, GPIO_PIN_RESET);
+
+ /* Deinit used GPIOs. */
+ HAL_GPIO_DeInit(GPIOB, GPIO_PIN_7);
+ HAL_GPIO_DeInit(GPIOC, GPIO_PIN_13);
+
+#if (BOOT_COM_UART_ENABLE > 0)
+ /* Deinit used GPIOs. */
+ HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8);
+ HAL_GPIO_DeInit(GPIOD, GPIO_PIN_9);
+ /* UART clock disable. */
+ __HAL_RCC_USART3_CLK_DISABLE();
+#endif
+
+ /* GPIO ports clock disable. */
+ __HAL_RCC_GPIOG_CLK_DISABLE();
+ __HAL_RCC_GPIOD_CLK_DISABLE();
+ __HAL_RCC_GPIOC_CLK_DISABLE();
+ __HAL_RCC_GPIOB_CLK_DISABLE();
+ __HAL_RCC_GPIOA_CLK_DISABLE();
+
+ /* SYSCFG and PWR clock disable. */
+ __HAL_RCC_PWR_CLK_DISABLE();
+ __HAL_RCC_SYSCFG_CLK_DISABLE();
+} /*** end of HAL_MspDeInit ***/
+
+
+/*********************************** end of main.c *************************************/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/shared_params.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/shared_params.c
new file mode 100644
index 00000000..1c2daaa0
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/shared_params.c
@@ -0,0 +1,301 @@
+/************************************************************************************//**
+* \file Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/shared_params.c
+* \brief Shared RAM parameters source file.
+* \ingroup Boot_ARMCM7_STM32F7_Nucleo_F767ZI_Keil
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2019 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+
+/****************************************************************************************
+* Include files
+****************************************************************************************/
+#include /* Standard definitions (NULL). */
+#include "shared_params.h" /* Shared parameters header. */
+
+
+/****************************************************************************************
+* Macro definitions
+****************************************************************************************/
+/** \brief Constant parameter buffer identifier. This value is always located as the
+ * start of the buffer to validate the the RAM contains valid shared parameters.
+ */
+#define SHARED_PARAMS_BUFFER_ID (0xCE42E7A2u)
+
+
+/****************************************************************************************
+* Type definitions
+****************************************************************************************/
+/** \brief Layout of the shared parameters RAM buffer. */
+typedef struct t_shared_params_buffer
+{
+ /** \brief Fixed buffer identifier to validate that the RAM contains valid shared
+ * parameters.
+ */
+ uint32_t identifier;
+ /** \brief Array for the actual parameter data. */
+ uint8_t data[SHARED_PARAMS_CFG_BUFFER_DATA_LEN];
+ /** \brief Checksum value of all the bytes in the buffer, excluding this checksum
+ * value of obvious reasons. The checksum is calculated as the Two's
+ * complement of the sum of the bytes.
+ */
+ uint16_t checksum;
+} tSharedParamsBuffer;
+
+
+/****************************************************************************************
+* Global data declarations
+****************************************************************************************/
+/** \brief Declaration of the actual parameter buffer that this module manages.
+ * \warning For the shared RAM parameters to work properly for sharing information
+ * between the bootloader and user program, it is important that this
+ * variable is linked to the exact same RAM address in both the bootloader
+ * and the user program. Additionally, it should be configured such that the
+ * C-startup code does NOT zero its contents during system initialization. This
+ * is the code that runs in the reset event handler, before function main() is
+ * called.
+ * For GCC based embedded toolchains, the solution is to assign this variable
+ * to a custom section, in this case called ".shared". Then in the linker
+ * script, add the following to the SECTIONS:
+ *
+ * .shared (NOLOAD) :
+ * {
+ * . = ALIGN(4);
+ * _sshared = .;
+ * __shared_start__ = _sshared;
+ * *(.shared)
+ * *(.shared.*)
+ * KEEP(*(.shared))
+ * . = ALIGN(4);
+ * _eshared = .;
+ * __shared_end__ = _eshared;
+ * } >SHARED
+ *
+ * Next, add a new MEMORY entry for SHARED at the start of RAM and reduce
+ * the length of the remaining RAM:
+ *
+ * SHARED (xrw) : ORIGIN = 0x200000C0, LENGTH = 64
+ * RAM (xrw) : ORIGIN = 0x20000100, LENGTH = 32K - 192 - 64
+ *
+ * Note that the previous example is for an STM32F0 microcontroller where
+ * the first 192 (0xC0) bytes in RAM are reserved for the user program
+ * vector table.
+ *
+ * \remark This same approach can be applied with other toolchains such as Keil MDK
+ * and IAR EWARM. Consult the compiler and linker user manuals of your
+ * toolchain to find out how to place a RAM variable at a fixed memory address
+ * and to prevent the C-startup code from zeroing its contents.
+ * Here are a few links to get you started:
+ * * IAR EWARM:
+ * https://www.iar.com/support/tech-notes/compiler/
+ * linker-error-for-absolute-located-variable/
+ * * Keil MDK:
+ * http://www.keil.com/support/docs/3480.htm
+ */
+static tSharedParamsBuffer sharedParamsBuffer __attribute__((section("shared"),zero_init));
+
+
+/****************************************************************************************
+* Function prototypes
+****************************************************************************************/
+static bool SharedParamsValidateBuffer(void);
+static void SharedParamsWriteChecksum(void);
+static bool SharedParamsVerifyChecksum(void);
+static uint16_t SharedParamsCalculateChecksum(void);
+
+
+/************************************************************************************//**
+** \brief Initializes the shared RAM parameters module.
+** \return none.
+**
+****************************************************************************************/
+void SharedParamsInit(void)
+{
+ uint32_t byteIdx;
+
+ /* The shared parameter buffer does not get initialized by the C-startup code. Another
+ * previously running program could have initialized it, in which case it is ready
+ * for use and nothing more needs to be done.
+ */
+ if (!SharedParamsValidateBuffer())
+ {
+ /* The shared parameter buffer was not yet initialized by a running program. This
+ * typically happens after a cold reset where the RAM contents were lost. In this
+ * case we need to explicitly configure and initialize it, since the C-startup code
+ * was configured to not do this.
+ *
+ * The initialization consists of setting the buffer identifier, zeroing the
+ * actual parameter data and updating the checksum at the end.
+ */
+ sharedParamsBuffer.identifier = SHARED_PARAMS_BUFFER_ID;
+ for (byteIdx=0; byteIdx < SHARED_PARAMS_CFG_BUFFER_DATA_LEN; byteIdx++)
+ {
+ sharedParamsBuffer.data[byteIdx] = 0;
+ }
+ SharedParamsWriteChecksum();
+ }
+} /*** end of SharedParamsInit ***/
+
+
+/************************************************************************************//**
+** \brief Reads a data byte from the shared parameter buffer at the specified index.
+** \param idx Index into the parameter data array. A valid value is between 0 and
+** (SHARED_PARAMS_CFG_BUFFER_DATA_LEN - 1).
+** \param value Pointer to where the read data value is stored.
+** \return True if successful, false otherwise.
+**
+****************************************************************************************/
+bool SharedParamsReadByIndex(uint32_t idx, uint8_t * value)
+{
+ bool result = false;
+
+ /* Only continue if the buffer and the specified parameters are valid. */
+ if ( (SharedParamsValidateBuffer()) &&
+ (idx < SHARED_PARAMS_CFG_BUFFER_DATA_LEN) &&
+ (value != NULL) )
+ {
+ /* Read the value and update the result. */
+ *value = sharedParamsBuffer.data[idx];
+ result = true;
+ }
+ /* Give the result back to the caller. */
+ return result;
+} /*** end of SharedParamsReadByIndex ***/
+
+
+/************************************************************************************//**
+** \brief Writes a data byte to the shared parameter buffer at the specified index.
+** \param idx Index into the parameter data array. A valid value is between 0 and
+** (SHARED_PARAMS_CFG_BUFFER_DATA_LEN - 1).
+** \param value Value to write.
+** \return True if successful, false otherwise.
+**
+****************************************************************************************/
+bool SharedParamsWriteByIndex(uint32_t idx, uint8_t value)
+{
+ bool result = false;
+
+ /* Only continue if the buffer and the specified parameters are valid. */
+ if ( (SharedParamsValidateBuffer()) &&
+ (idx < SHARED_PARAMS_CFG_BUFFER_DATA_LEN) )
+ {
+ /* Write the value. */
+ sharedParamsBuffer.data[idx] = value;
+ /* Update the checksum since the contents were just changed. */
+ SharedParamsWriteChecksum();
+ /* Update the result. */
+ result = true;
+ }
+ /* Give the result back to the caller. */
+ return result;
+} /*** end of SharedParamsWriteByIndex ***/
+
+
+/************************************************************************************//**
+** \brief Validates the shared parameter buffer contents by looking at the table
+** identifier and verifying its checksum.
+** \return True if successful, false otherwise.
+**
+****************************************************************************************/
+static bool SharedParamsValidateBuffer(void)
+{
+ bool result = false;
+
+ /* Perform validation. */
+ if ( (sharedParamsBuffer.identifier == SHARED_PARAMS_BUFFER_ID) &&
+ (SharedParamsVerifyChecksum()) )
+ {
+ /* The shared parameter buffer is valid, so update the result value. */
+ result = true;
+ }
+ /* Give the result back to the caller. */
+ return result;
+} /*** end of SharedParamsValitabeTable ***/
+
+
+/************************************************************************************//**
+** \brief Calculates and writes the checksum into the buffer.
+** \return none.
+**
+****************************************************************************************/
+static void SharedParamsWriteChecksum(void)
+{
+ /* Calculate and write the checksum. */
+ sharedParamsBuffer.checksum = SharedParamsCalculateChecksum();
+} /*** end of SharedParamsWriteChecksum ***/
+
+
+/************************************************************************************//**
+** \brief Calculates and verifies the checksum that is currently present in the
+** buffer.
+** \return True is the checksum is correct, false otherwise.
+**
+****************************************************************************************/
+static bool SharedParamsVerifyChecksum(void)
+{
+ bool result = false;
+
+ /* Calculate and verify the checksum. */
+ if (SharedParamsCalculateChecksum() == sharedParamsBuffer.checksum)
+ {
+ /* Checksum is correct, so update the result value. */
+ result = true;
+ }
+ /* Give the result back to the caller. */
+ return result;
+} /*** end of SharedParamsVerifyChecksum ***/
+
+
+/************************************************************************************//**
+** \brief Calculates and returns the checksum value for the current contents in the
+** buffer. The checksum is calculated by taking the sum of all bytes in the
+** parameter buffer (excluding the checksum at the end) and them taking the
+** two's complement value of it.
+** \return The calculated checksum value.
+**
+****************************************************************************************/
+static uint16_t SharedParamsCalculateChecksum(void)
+{
+ uint16_t result = 0;
+ uint32_t byteIdx;
+
+ /* Add the identifier bytes to the checksum. */
+ result += (uint8_t)sharedParamsBuffer.identifier;
+ result += (uint8_t)(sharedParamsBuffer.identifier >> 8u);
+ result += (uint8_t)(sharedParamsBuffer.identifier >> 16u);
+ result += (uint8_t)(sharedParamsBuffer.identifier >> 24u);
+ /* Loop through the parameter data array. */
+ for (byteIdx=0; byteIdx /* Standard integer types. */
+#include /* Standard boolean types. */
+
+
+/****************************************************************************************
+* Configuration macros
+****************************************************************************************/
+/** \brief Configuration macro for specifying the size of the data inside the parameter
+ * buffer. This is the length in bytes of the actual parameter data, so
+ * excluding the bufferId and checksum.
+ */
+#define SHARED_PARAMS_CFG_BUFFER_DATA_LEN (56u)
+
+
+/****************************************************************************************
+* Function prototypes
+****************************************************************************************/
+void SharedParamsInit(void);
+bool SharedParamsReadByIndex(uint32_t idx, uint8_t * value);
+bool SharedParamsWriteByIndex(uint32_t idx, uint8_t value);
+
+
+#endif /* SHARED_PARAMS_H */
+/*********************************** end of shared_params.h ****************************/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/startup_stm32f767xx.s b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/startup_stm32f767xx.s
new file mode 100644
index 00000000..e66f3832
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/startup_stm32f767xx.s
@@ -0,0 +1,517 @@
+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name : startup_stm32f767xx.s
+;* Author : MCD Application Team
+;* Description : STM32F767xx devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM7 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+;
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;* 1. Redistributions of source code must retain the above copyright notice,
+;* this list of conditions and the following disclaimer.
+;* 2. Redistributions in binary form must reproduce the above copyright notice,
+;* this list of conditions and the following disclaimer in the documentation
+;* and/or other materials provided with the distribution.
+;* 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* may be used to endorse or promote products derived from this software
+;* without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; Stack Configuration
+; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+
+Stack_Size EQU 0x400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; Heap Configuration
+; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+
+Heap_Size EQU 0x200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window WatchDog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detection
+ DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
+ DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line0
+ DCD EXTI1_IRQHandler ; EXTI Line1
+ DCD EXTI2_IRQHandler ; EXTI Line2
+ DCD EXTI3_IRQHandler ; EXTI Line3
+ DCD EXTI4_IRQHandler ; EXTI Line4
+ DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
+ DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
+ DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
+ DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
+ DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
+ DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
+ DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
+ DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
+ DCD CAN1_TX_IRQHandler ; CAN1 TX
+ DCD CAN1_RX0_IRQHandler ; CAN1 RX0
+ DCD CAN1_RX1_IRQHandler ; CAN1 RX1
+ DCD CAN1_SCE_IRQHandler ; CAN1 SCE
+ DCD EXTI9_5_IRQHandler ; External Line[9:5]s
+ DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
+ DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
+ DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; External Line[15:10]s
+ DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
+ DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
+ DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
+ DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
+ DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
+ DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
+ DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
+ DCD FMC_IRQHandler ; FMC
+ DCD SDMMC1_IRQHandler ; SDMMC1
+ DCD TIM5_IRQHandler ; TIM5
+ DCD SPI3_IRQHandler ; SPI3
+ DCD UART4_IRQHandler ; UART4
+ DCD UART5_IRQHandler ; UART5
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
+ DCD TIM7_IRQHandler ; TIM7
+ DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
+ DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
+ DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
+ DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
+ DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
+ DCD ETH_IRQHandler ; Ethernet
+ DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
+ DCD CAN2_TX_IRQHandler ; CAN2 TX
+ DCD CAN2_RX0_IRQHandler ; CAN2 RX0
+ DCD CAN2_RX1_IRQHandler ; CAN2 RX1
+ DCD CAN2_SCE_IRQHandler ; CAN2 SCE
+ DCD OTG_FS_IRQHandler ; USB OTG FS
+ DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
+ DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
+ DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
+ DCD USART6_IRQHandler ; USART6
+ DCD I2C3_EV_IRQHandler ; I2C3 event
+ DCD I2C3_ER_IRQHandler ; I2C3 error
+ DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
+ DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
+ DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
+ DCD OTG_HS_IRQHandler ; USB OTG HS
+ DCD DCMI_IRQHandler ; DCMI
+ DCD 0 ; Reserved
+ DCD RNG_IRQHandler ; Rng
+ DCD FPU_IRQHandler ; FPU
+ DCD UART7_IRQHandler ; UART7
+ DCD UART8_IRQHandler ; UART8
+ DCD SPI4_IRQHandler ; SPI4
+ DCD SPI5_IRQHandler ; SPI5
+ DCD SPI6_IRQHandler ; SPI6
+ DCD SAI1_IRQHandler ; SAI1
+ DCD LTDC_IRQHandler ; LTDC
+ DCD LTDC_ER_IRQHandler ; LTDC error
+ DCD DMA2D_IRQHandler ; DMA2D
+ DCD SAI2_IRQHandler ; SAI2
+ DCD QUADSPI_IRQHandler ; QUADSPI
+ DCD LPTIM1_IRQHandler ; LPTIM1
+ DCD CEC_IRQHandler ; HDMI_CEC
+ DCD I2C4_EV_IRQHandler ; I2C4 Event
+ DCD I2C4_ER_IRQHandler ; I2C4 Error
+ DCD SPDIF_RX_IRQHandler ; SPDIF_RX
+ DCD 0 ; Reserved
+ DCD DFSDM1_FLT0_IRQHandler ; DFSDM1 Filter 0 global Interrupt
+ DCD DFSDM1_FLT1_IRQHandler ; DFSDM1 Filter 1 global Interrupt
+ DCD DFSDM1_FLT2_IRQHandler ; DFSDM1 Filter 2 global Interrupt
+ DCD DFSDM1_FLT3_IRQHandler ; DFSDM1 Filter 3 global Interrupt
+ DCD SDMMC2_IRQHandler ; SDMMC2
+ DCD CAN3_TX_IRQHandler ; CAN3 TX
+ DCD CAN3_RX0_IRQHandler ; CAN3 RX0
+ DCD CAN3_RX1_IRQHandler ; CAN3 RX1
+ DCD CAN3_SCE_IRQHandler ; CAN3 SCE
+ DCD JPEG_IRQHandler ; JPEG
+ DCD MDIOS_IRQHandler ; MDIOS
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMP_STAMP_IRQHandler [WEAK]
+ EXPORT RTC_WKUP_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Stream0_IRQHandler [WEAK]
+ EXPORT DMA1_Stream1_IRQHandler [WEAK]
+ EXPORT DMA1_Stream2_IRQHandler [WEAK]
+ EXPORT DMA1_Stream3_IRQHandler [WEAK]
+ EXPORT DMA1_Stream4_IRQHandler [WEAK]
+ EXPORT DMA1_Stream5_IRQHandler [WEAK]
+ EXPORT DMA1_Stream6_IRQHandler [WEAK]
+ EXPORT ADC_IRQHandler [WEAK]
+ EXPORT CAN1_TX_IRQHandler [WEAK]
+ EXPORT CAN1_RX0_IRQHandler [WEAK]
+ EXPORT CAN1_RX1_IRQHandler [WEAK]
+ EXPORT CAN1_SCE_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK]
+ EXPORT TIM1_UP_TIM10_IRQHandler [WEAK]
+ EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM4_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT I2C2_EV_IRQHandler [WEAK]
+ EXPORT I2C2_ER_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTC_Alarm_IRQHandler [WEAK]
+ EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
+ EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
+ EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
+ EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
+ EXPORT TIM8_CC_IRQHandler [WEAK]
+ EXPORT DMA1_Stream7_IRQHandler [WEAK]
+ EXPORT FMC_IRQHandler [WEAK]
+ EXPORT SDMMC1_IRQHandler [WEAK]
+ EXPORT TIM5_IRQHandler [WEAK]
+ EXPORT SPI3_IRQHandler [WEAK]
+ EXPORT UART4_IRQHandler [WEAK]
+ EXPORT UART5_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT DMA2_Stream0_IRQHandler [WEAK]
+ EXPORT DMA2_Stream1_IRQHandler [WEAK]
+ EXPORT DMA2_Stream2_IRQHandler [WEAK]
+ EXPORT DMA2_Stream3_IRQHandler [WEAK]
+ EXPORT DMA2_Stream4_IRQHandler [WEAK]
+ EXPORT ETH_IRQHandler [WEAK]
+ EXPORT ETH_WKUP_IRQHandler [WEAK]
+ EXPORT CAN2_TX_IRQHandler [WEAK]
+ EXPORT CAN2_RX0_IRQHandler [WEAK]
+ EXPORT CAN2_RX1_IRQHandler [WEAK]
+ EXPORT CAN2_SCE_IRQHandler [WEAK]
+ EXPORT OTG_FS_IRQHandler [WEAK]
+ EXPORT DMA2_Stream5_IRQHandler [WEAK]
+ EXPORT DMA2_Stream6_IRQHandler [WEAK]
+ EXPORT DMA2_Stream7_IRQHandler [WEAK]
+ EXPORT USART6_IRQHandler [WEAK]
+ EXPORT I2C3_EV_IRQHandler [WEAK]
+ EXPORT I2C3_ER_IRQHandler [WEAK]
+ EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK]
+ EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK]
+ EXPORT OTG_HS_WKUP_IRQHandler [WEAK]
+ EXPORT OTG_HS_IRQHandler [WEAK]
+ EXPORT DCMI_IRQHandler [WEAK]
+ EXPORT RNG_IRQHandler [WEAK]
+ EXPORT FPU_IRQHandler [WEAK]
+ EXPORT UART7_IRQHandler [WEAK]
+ EXPORT UART8_IRQHandler [WEAK]
+ EXPORT SPI4_IRQHandler [WEAK]
+ EXPORT SPI5_IRQHandler [WEAK]
+ EXPORT SPI6_IRQHandler [WEAK]
+ EXPORT SAI1_IRQHandler [WEAK]
+ EXPORT LTDC_IRQHandler [WEAK]
+ EXPORT LTDC_ER_IRQHandler [WEAK]
+ EXPORT DMA2D_IRQHandler [WEAK]
+ EXPORT SAI2_IRQHandler [WEAK]
+ EXPORT QUADSPI_IRQHandler [WEAK]
+ EXPORT LPTIM1_IRQHandler [WEAK]
+ EXPORT CEC_IRQHandler [WEAK]
+ EXPORT I2C4_EV_IRQHandler [WEAK]
+ EXPORT I2C4_ER_IRQHandler [WEAK]
+ EXPORT SPDIF_RX_IRQHandler [WEAK]
+ EXPORT DFSDM1_FLT0_IRQHandler [WEAK]
+ EXPORT DFSDM1_FLT1_IRQHandler [WEAK]
+ EXPORT DFSDM1_FLT2_IRQHandler [WEAK]
+ EXPORT DFSDM1_FLT3_IRQHandler [WEAK]
+ EXPORT SDMMC2_IRQHandler [WEAK]
+ EXPORT CAN3_TX_IRQHandler [WEAK]
+ EXPORT CAN3_RX0_IRQHandler [WEAK]
+ EXPORT CAN3_RX1_IRQHandler [WEAK]
+ EXPORT CAN3_SCE_IRQHandler [WEAK]
+ EXPORT JPEG_IRQHandler [WEAK]
+ EXPORT MDIOS_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMP_STAMP_IRQHandler
+RTC_WKUP_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Stream0_IRQHandler
+DMA1_Stream1_IRQHandler
+DMA1_Stream2_IRQHandler
+DMA1_Stream3_IRQHandler
+DMA1_Stream4_IRQHandler
+DMA1_Stream5_IRQHandler
+DMA1_Stream6_IRQHandler
+ADC_IRQHandler
+CAN1_TX_IRQHandler
+CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM9_IRQHandler
+TIM1_UP_TIM10_IRQHandler
+TIM1_TRG_COM_TIM11_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+OTG_FS_WKUP_IRQHandler
+TIM8_BRK_TIM12_IRQHandler
+TIM8_UP_TIM13_IRQHandler
+TIM8_TRG_COM_TIM14_IRQHandler
+TIM8_CC_IRQHandler
+DMA1_Stream7_IRQHandler
+FMC_IRQHandler
+SDMMC1_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+DMA2_Stream0_IRQHandler
+DMA2_Stream1_IRQHandler
+DMA2_Stream2_IRQHandler
+DMA2_Stream3_IRQHandler
+DMA2_Stream4_IRQHandler
+ETH_IRQHandler
+ETH_WKUP_IRQHandler
+CAN2_TX_IRQHandler
+CAN2_RX0_IRQHandler
+CAN2_RX1_IRQHandler
+CAN2_SCE_IRQHandler
+OTG_FS_IRQHandler
+DMA2_Stream5_IRQHandler
+DMA2_Stream6_IRQHandler
+DMA2_Stream7_IRQHandler
+USART6_IRQHandler
+I2C3_EV_IRQHandler
+I2C3_ER_IRQHandler
+OTG_HS_EP1_OUT_IRQHandler
+OTG_HS_EP1_IN_IRQHandler
+OTG_HS_WKUP_IRQHandler
+OTG_HS_IRQHandler
+DCMI_IRQHandler
+RNG_IRQHandler
+FPU_IRQHandler
+UART7_IRQHandler
+UART8_IRQHandler
+SPI4_IRQHandler
+SPI5_IRQHandler
+SPI6_IRQHandler
+SAI1_IRQHandler
+LTDC_IRQHandler
+LTDC_ER_IRQHandler
+DMA2D_IRQHandler
+SAI2_IRQHandler
+QUADSPI_IRQHandler
+LPTIM1_IRQHandler
+CEC_IRQHandler
+I2C4_EV_IRQHandler
+I2C4_ER_IRQHandler
+SPDIF_RX_IRQHandler
+DFSDM1_FLT0_IRQHandler
+DFSDM1_FLT1_IRQHandler
+DFSDM1_FLT2_IRQHandler
+DFSDM1_FLT3_IRQHandler
+SDMMC2_IRQHandler
+CAN3_TX_IRQHandler
+CAN3_RX0_IRQHandler
+CAN3_RX1_IRQHandler
+CAN3_SCE_IRQHandler
+JPEG_IRQHandler
+MDIOS_IRQHandler
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/stm32f767.sct b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/stm32f767.sct
new file mode 100644
index 00000000..fdb6e5b3
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/stm32f767.sct
@@ -0,0 +1,21 @@
+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x08000000 0x00008000 { ; load region size_region
+ ER_IROM1 0x08000000 0x00008000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ .ANY (+XO)
+ }
+
+ RW_IRAM1 0x20000000 UNINIT 0x00000040 { ; no init for shared params
+ *(shared)
+ }
+
+ RW_IRAM2 0x20000040 0x0007FFC0 { ; all other RW data
+ .ANY (+RW +ZI)
+ }
+}
+
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/bin/demoprog_stm32f767.axf b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/bin/demoprog_stm32f767.axf
new file mode 100644
index 00000000..0c450156
Binary files /dev/null and b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/bin/demoprog_stm32f767.axf differ
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/bin/demoprog_stm32f767.srec b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/bin/demoprog_stm32f767.srec
new file mode 100644
index 00000000..263733e3
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/bin/demoprog_stm32f767.srec
@@ -0,0 +1,939 @@
+S31508008000E83F00209D820008A9820008AB8200088C
+S31508008010AD820008AF820008B182000800000000A7
+S31508008020000000000000000000000000B382000805
+S31508008030B582000800000000B7820008099F000802
+S31508008040BB820008BB820008BB820008BB8200080E
+S31508008050BB820008BB820008BB820008BB820008FE
+S31508008060BB820008BB820008BB820008BB820008EE
+S31508008070BB820008BB820008BB820008BB820008DE
+S31508008080BB820008BB820008BB820008BB820008CE
+S31508008090BB820008BB820008BB820008BB820008BE
+S315080080A0BB820008BB820008BB820008BB820008AE
+S315080080B0BB820008BB820008BB820008BB8200089E
+S315080080C0BB820008BB820008BB820008BB8200088E
+S315080080D0BB820008BB820008BB820008BB8200087E
+S315080080E0BB820008BB820008BB820008BB8200086E
+S315080080F0BB820008BB820008BB820008BB8200085E
+S31508008100BB820008BB820008BB820008BB8200084D
+S31508008110BB820008BB820008BB820008BB8200083D
+S31508008120BB820008BB820008BB820008BB8200082D
+S31508008130BB820008BB820008BB820008BB8200081D
+S31508008140BB820008BB820008BB820008BB8200080D
+S31508008150BB820008BB820008BB820008BB820008FD
+S31508008160BB820008BB820008BB820008BB820008ED
+S31508008170BB820008BB820008BB8200080000000022
+S31508008180BB820008BB820008BB820008BB820008CD
+S31508008190BB820008BB820008BB820008BB820008BD
+S315080081A0BB820008BB820008BB820008BB820008AD
+S315080081B0BB820008BB820008BB820008BB8200089D
+S315080081C0BB820008BB82000800000000BB820008D2
+S315080081D0BB820008BB820008BB820008BB8200087D
+S315080081E0BB820008BB820008BB820008BB8200086D
+S315080081F0BB820008BB820008EE11AA5500F002F8FF
+S3150800820000F03CF80AA090E8000C82448344AAF1E6
+S315080082100107DA4501D100F031F8AFF2090EBAE8E4
+S315080082200F0013F0010F18BFFB1A43F0010318479C
+S31508008230D4370000F4370000103A24BF78C878C154
+S31508008240FAD8520724BF30C830C144BF04680C604E
+S31508008250704700000023002400250026103A28BF96
+S3150800826078C1FBD8520728BF30C148BF0B6070479A
+S315080082701FB503F0AFFB1FBD10B510BD00F0A0F988
+S315080082801146FFF7F5FF02F0DCFA00F0BEF903B479
+S31508008290FFF7F2FF03BC00F0C5F900000A4885465F
+S315080082A00A4880470A480047FEE7FEE7FEE7FEE77A
+S315080082B0FEE7FEE7FEE7FEE7FEE7FEE705480649B6
+S315080082C0064A074B70470000E83F0020A19F0008B8
+S315080082D0FD810008E8390020E83F0020E83B00203F
+S315080082E0E83B002053EA020C00F069802DE9F04BC8
+S315080082F04FF00006002B1FBFB3FA83F503FA05F407
+S3150800830024FA05F65E4012BF1643B2FA82F502FA5F
+S3150800831005F4C5F120051EBF22FA05FC44EA0C0443
+S31508008320203556EA044C4FEA144418BF641C4FF033
+S3150800833000084FF00009904271EB030C39D300296D
+S3150800834019BFB1FA81F701FA07F6B0FA80F700FA11
+S3150800835007F6C7F120071EBF20FA07FC46EA0C06F7
+S315080083602037B6FBF4FCA7EB0507103F07F01F0BF9
+S31508008370CBF120060CFA0BFB2CFA06F644BFB346E3
+S315080083800026202FA4BF5E464FF0000B5BEA060CC2
+S3150800839008BF4FF0010B19EB0B09ABFB027C48EB4E
+S315080083A00608C01B06FB02CC0BFB03CC71EB0C01C9
+S315080083B0C1E70B46024641464846BDE8F08B13B571
+S315080083C04FF000004FF00001AFF30080BDE81C40FD
+S315080083D0704740EA010310B59B070FD1042A0DD355
+S315080083E010C808C9121F9C42F8D020BA19BA884288
+S315080083F001D9012010BD4FF0FF3010BD1AB1D307C7
+S3150800840003D0521C07E0002010BD10F8013B11F8FC
+S31508008410014B1B1B07D110F8013B11F8014B1B1B25
+S3150800842001D1921EF1D1184610BD032A40F23080C0
+S3150800843010F0030C00F0158011F8013BBCF1020F97
+S31508008440624498BF11F801CB00F8013B38BF11F818
+S31508008450013BA2F1040298BF00F801CB38BF00F82F
+S31508008460013B11F0030300F05280083AC0F008807F
+S3150800847051F8043B083A51F804CBA0E80810F5E790
+S31508008480121D5CBF51F8043B40F8043BAFF3008073
+S31508008490D20724BF11F8013B11F801CB48BF11F8E8
+S315080084A0012B24BF00F8013B00F801CB48BF00F8B8
+S315080084B0012B704702F0FF0343EA032242EA024215
+S315080084C000F002B84FF000020429C0F0128010F044
+S315080084D0030C00F05080CCF1040CBCF1020F18BF5D
+S315080084E000F8012BA8BF20F8022BA1EB0C0100F025
+S315080084F042B85FEAC17C24BF00F8012B00F8012BC3
+S3150800850048BF00F8012B704770477047704710B591
+S31508008510203AC0F00B80B1E81850203AA0E818506D
+S31508008520B1E81850A0E81850BFF4F5AF5FEA027C2E
+S3150800853024BFB1E81850A0E8185044BF18C918C09D
+S31508008540BDE810405FEA827C24BF51F8043B40F83E
+S31508008550043B08BF7047D20728BF31F8023B48BF23
+S3150800856011F8012B28BF20F8023B48BF00F8012B61
+S3150800857070474FF0000200B51346944696462039D8
+S3150800858022BFA0E80C50A0E80C50B1F12001BFF4BE
+S31508008590F7AF090728BFA0E80C5048BF0CC05DF824
+S315080085A004EB890028BF40F8042B08BF704748BF72
+S315080085B020F8022B11F0804F18BF00F8012B7047E6
+S315080085C0754600F02BF8AE4605006946534620F07E
+S315080085D00700854618B020B5FFF770FEBDE82040B5
+S315080085E04FF000064FF000074FF000084FF0000B61
+S315080085F021F00701AC46ACE8C009ACE8C009ACE814
+S31508008600C009ACE8C0098D46704710B50446AFF3FB
+S3150800861000802046BDE81040FFF739BE0048704785
+S315080086208839002001491820ABBEFEE72600020063
+S3150800863070470000BFF34F8F05480168054A01F4EB
+S31508008640E06111430160BFF34F8F00BFFDE70000F3
+S315080086500CED00E00400FA0500F002B800F03AB8A4
+S3150800866070B51A4C00251A4E607800280ED020786E
+S315080086703044401C01F002FF012817D001F0B6FC77
+S3150800868061686431884200D9657070BD104801F090
+S31508008690F5FE0128F9D13078401E3F28F5D801F0BB
+S315080086A0A5FC606001206070257070BD2078401CB4
+S315080086B0C0B2207031788142F7D165707078FF2892
+S315080086C0F3D1B0780028F0D1FFF7B4FF58000020A6
+S315080086D0A03100200948084901604FF46141416012
+S315080086E000218160C16001610C2242618161C16122
+S315080086F00162416201F0D1B900480040E43100202E
+S31508008700006800F58050816941F002018161704777
+S31508008710006800F58050816941F400518161704715
+S3150800872038B50446206800F58050816941F4801107
+S315080087308161206800F5805080690090012000F072
+S3150800874007F92068009900F58050816138BD00005E
+S315080087505379107940EA0323074808440364D37819
+S31508008760117841EA0361937852781B0443EA02229E
+S315080087701143416470470000008002402DE9F04132
+S31508008780AEB00446002904D04FF40060E060C00093
+S31508008790A0600025119512951395149515951695B3
+S315080087A0E06900287DD017954FF400701890199548
+S315080087B01A951B951C951D9540271E971F95209564
+S315080087C021952295239524952595269580262796E5
+S315080087D0289529952A952B952C952D95206802681C
+S315080087E045490A40D4E902131943179B194341F432
+S315080087F00071114301602068D0F80080012000F064
+S31508008800A7F82068C0F80080206847602068476895
+S31508008810012000F09DF82068476020688560206880
+S31508008820C560206881694FF64172114041F08001A8
+S31508008830816120688769012000F08AF820688761CD
+S315080088402068C5612068C769012000F081F82068A2
+S31508008850C7610195B004029003950111049105952D
+S31508008860069507950895042109910A9040120B90E0
+S3150800887080010C9040120D900E960F951095206869
+S3150800888000F5805081691D4A11401D4A0A438261DC
+S31508008890206800F580508569012000F059F82068A5
+S315080088A000E016E000F5805085612068154900F55E
+S315080088B080500160206800F580500568012000F0AE
+S315080088C047F8206800F580500560A069012804D0A3
+S315080088D00AE04FF48060179066E7206800F580503C
+S315080088E0C169094A1143C16162692EB02046002157
+S315080088F0BDE8F041FFF72CBF0F8120FF233FDEF8CC
+S31508008900040020028020C1024000010038B5044658
+S315080089102068016841F00401016020680068009041
+S31508008920012000F015F821680098086038BD38B5B0
+S3150800893004462068016841F0080101602068006863
+S315080089400090012000F004F821680098086038BDFE
+S3150800895070B5044600F054FC0546601C02D0044875
+S315080089600078044400F04CFC401BA042FAD370BDCA
+S3150800897040000020F0B5002490F84550012D09D09C
+S31508008980012780F84570022580F84450816244F238
+S31508008990F45C19E00220F0BD01EB44154FF00046E7
+S315080089A02E60C5F804C0C4EBC41606EB460602EBF7
+S315080089B08606AE6086695E1EB44203D205F12006BD
+S315080089C0EE6000E0E960641C9C42E5D3026802F5AB
+S315080089D08052D16080F84470002180F8451000204C
+S315080089E0F0BD2DE9F043002590F84540012C0BD049
+S315080089F04FF0010C80F845C0022480F84440C1625B
+S31508008A005F1E4FF480181CE00220BDE8F08301EBDE
+S31508008A104514C4F80080C5EBC51606EB460602EBFE
+S31508008A208606A660C66926B9266846F44009C4F8CB
+S31508008A300090BD4203D204F12006E66000E0E16042
+S31508008A406D1C9D42E3D3026802F58052116180F8DD
+S31508008A5044C0002180F845100020D6E710B590F8EC
+S31508008A604510012913D0012380F84530022180F8EA
+S31508008A704410816A0A680024002A29DB0A68D2059C
+S31508008A8018D5826B521C8263012A02D002E00220AA
+S31508008A9010BD01632830C1600A68C2F30D42121F77
+S31508008AA04261826892688261C96801600377447787
+S31508008AB0002010BD0A68920505D5016344638363E7
+S31508008AC0C968816204E0826B521C8263C96881624C
+S31508008AD000F8443F4470012010BD00002DE9FC4712
+S31508008AE0044600260196B046002C03D094F84400AC
+S31508008AF018B107E00120BDE8FC8784F845602046E8
+S31508008B0000F002F97648016841F480410160006886
+S31508008B1000F4804000907348016821F40001016068
+S31508008B200168226A11430160206800F580500168D7
+S31508008B3041F00101016000F063FB05464FF4FA7746
+S31508008B4009E000F05DFB401BB84204D9032004F895
+S31508008B50440F6670CFE7206800F580500068C007AC
+S31508008B60EFD12068006920F01C0500F027FD5E495A
+S31508008B705E4A0144914202D245F0080516E05C4976
+S31508008B805C4A0144914202D245F00C050EE05A496E
+S31508008B905A4A0144914209D35949084459498842D5
+S31508008BA002D245F0040501E045F01005206805618C
+S31508008BB000214FF40042204600F0ECF9012538B1B7
+S31508008BC001212046FFF7DAFD84F84450012092E798
+S31508008BD0FF20FFF7BDFE6068F0B300F011FB074603
+S31508008BE041F288390121204601AA00F0E7F800F091
+S31508008BF007FBC01B484508D901212046FFF7BEFDE3
+S31508008C0004F8445F6670032075E701984007E9D5C4
+S31508008C10002120464FF4805200F0BCF938B10121FA
+S31508008C202046FFF7ABFD84F84450012063E700F0C7
+S31508008C30E7FA07462046012101AA00F0BFF800F02E
+S31508008C40DFFAC01B48450AD901212046FFF796FDE1
+S31508008C5004F8445F667000E022E003204BE70198C1
+S31508008C608006E7D51021204601AA00F0A7F838B1FA
+S31508008C7001212046FFF782FD84F8445001203AE797
+S31508008C800198410703D54FF40061E16000E0E66012
+S31508008C90800701D5A6601BE04FF48040A06017E06E
+S31508008CA0E0680021C0F3CF02A068C0F34F0002437A
+S31508008CB0204600F06FF938B101212046FFF75EFD26
+S31508008CC084F84450012016E740F6FF70FFF740FE8F
+S31508008CD041462046FFF752FD84F8445000200AE733
+S31508008CE0443802400438014000D3CEFEC0E1E40017
+S31508008CF040F1E9FD40787D0100796CFC005A62027A
+S31508008D00001F0AFA80F0FA02F0B587B00068254914
+S31508008D10884245D12448016841F000710160016824
+S31508008D2001F000710191016841F0806101600168FC
+S31508008D3001F080610191016841F0006101600068FD
+S31508008D4000F000600190322002900224039400256E
+S31508008D500495032605960B270697144802A900F0E2
+S31508008D6057F986200290039404950596069702A95A
+S31508008D700F4800F04DF920030290039404950596D8
+S31508008D80069702A90B4800F043F94FF420500290C9
+S31508008D90039404950596069702A9074800F038F942
+S31508008DA007B0F0BD0080024030380240000802409B
+S31508008DB00000024000040240001802402DE9F04776
+S31508008DC00446914694F8440082281DD0822084F8EF
+S31508008DD044002068026902F01C03228A4FF6FF75D8
+S31508008DE005EAC2221A434FF4F86303EA81111143D4
+S31508008DF021F0020141F00105056100F001FA06467D
+S31508008E0001274FF480380FE00220BDE8F08700F014
+S31508008E10F7F9801B404505D304F8447F00206070AD
+S31508008E200320F2E720680569E807F0D12068406961
+S31508008E3080B2C9F8000084F844700020E5E770B5F0
+S31508008E40044694F84500012819D0012584F84550B0
+S31508008E50022084F844002046FFF769FD2046FFF704
+S31508008E6055FD2046FFF75CFC2046FFF751FC2046DF
+S31508008E70FFF746FC04F8445F0020607070BD0220CE
+S31508008E8070BDF0B5002390F84520012A11D00127BE
+S31508008E9080F84570022280F84420002659B1C46A39
+S31508008EA02268002A0CDA122100F8441F46700120B5
+S31508008EB0F0BD0220F0BD00F8447F46700120F0BDE9
+S31508008EC040F2F455A9420AD9B1FBF5F2B1FBF5FC1B
+S31508008ED005FB1C1CBCF1000F02D0521C00E001224D
+S31508008EE0012A44D1226842F040522260C26AC1F384
+S31508008EF00C015160C16A0A6842F000420A60C16A00
+S31508008F00C968C16235E0C46AD4F800C02CF0405C78
+S31508008F10C4F800C033B9C46AD4F800C04CF0805C09
+S31508008F20C4F800C0C46A6560541EA34214D1C46A5A
+S31508008F30D4F800C04CF0005CC4F800C0C2F10104CB
+S31508008F40C4EBC41404EB440401EB8404D0F82CC02D
+S31508008F50C4F30C04CCF80440C46AD4F800C04CF03E
+S31508008F60004CC4F800C0C46AE468C4625B1C93423F
+S31508008F70C9D3016801F580514A69520705D504220B
+S31508008F804A61016801F580514E6000F8447F4670D9
+S31508008F900020F0BD2DE9F041044694F8440042282B
+S31508008FA020D0422084F844002068036903F01C039B
+S31508008FB0258A4FF6FF7606EAC5251D434FF4F86362
+S31508008FC003EA8111294341F0020141F0010591B2FA
+S31508008FD041612068056100F013F9064601274FF440
+S31508008FE080380FE00220BDE8F08100F009F9801B07
+S31508008FF0404505D304F8447F002060700320F2E75B
+S3150800900020680569E807F0D184F84470EBE70000AA
+S315080090102DE9F84F0022DFF8A491DFF8A0814FF080
+S31508009020010E09F108094FF00F0C09F1040A0EFAAE
+S3150800903002F60B683340B34271D14C68022C01D05A
+S31508009040122C11D1D40800EB84073D6A5407E40EAC
+S315080090500CFA04FB25EA0B05D1F810B00BFA04FB51
+S315080090604BEA050BC7F820B0076854000325A5404E
+S31508009070AF4391F804B00BF0030B0BFA04FB4BEA71
+S31508009080070BC0F800B04F68012F05D0022F03D098
+S31508009090112F01D0122F11D18768AF43D1F80CB028
+S315080090A00BFA04FB4BEA070BC0F808B04768B7434E
+S315080090B00E79C6F3001696403E434660C668AE4330
+S315080090C08D68A5403543C5604C68E4006FD53C4CB7
+S315080090D0256845F480452560246804F48044009496
+S315080090E0384C22F003052544D5F808789407260F4E
+S315080090F00CFA06F4A743344CA04201D100242EE012
+S31508009100324CA04201D1012429E0314CA04201D1C0
+S31508009110022424E02F4CA04202D103241FE046E09B
+S315080091202D4CA04201D1042419E02C4CA04201D1B7
+S31508009130052414E02A4CA04201D106240FE0294C4C
+S31508009140A04201D107240AE0274CA04201D10824F5
+S3150800915005E0264CA04201D1092400E00A24B440C7
+S315080091603C43C5F80848D8F800409C434D68ED03D1
+S3150800917000D51C43C8F80040104D2D1D2C689C4393
+S315080091804E68B60300D51C432C60D9F800409C43B2
+S315080091904D68ED0200D51C43C9F80040DAF80040D6
+S315080091A09C434D68AD0200D51C43CAF80040521CCA
+S315080091B0102AFFF43CAFBDE8F88F0000003C0140E0
+S315080091C044380240003001400000024000040240DA
+S315080091D000080240000C0240001002400014024041
+S315080091E000180240001C02400020024000240240F1
+S315080091F0002A01D081617047090481617047000027
+S3150800920001488068704700004000002002488168D5
+S3150800921002781144816070474000002010B5032091
+S3150800922000F0DAF8002000F005F800F025F8002034
+S3150800923010BD000070B504460D4D4FF47A712878BC
+S31508009240B1FBF0F00B490968B1FBF0F000F00DFC3A
+S3150800925008B1012070BD102C07D200222146501EED
+S3150800926000F09AF86C60002070BD012070BD000007
+S31508009270400000205400002010B586B04349086815
+S3150800928040F080500860086800F080500090081D83
+S31508009290026842F480420260006800F48040009050
+S315080092A03A481038026842F001020260026802F089
+S315080092B001020092026842F002020260026802F0AD
+S315080092C002020092026842F004020260026802F09A
+S315080092D004020092026842F008020260026802F084
+S315080092E008020092026842F040020260006800F03C
+S315080092F040000090086840F480200860086800F480
+S3150800930080200090032000F067F800226FF00B0021
+S31508009310114600F041F800226FF00A00114600F0ED
+S315080093203BF800226FF00900114600F035F80022DC
+S31508009330501F114600F030F80022101F114600F0A9
+S315080093402BF80022901E114600F026F80022501E27
+S31508009350114600F021F88020019001200290002497
+S315080093600394049401A90A48FFF752FE4FF440708B
+S315080093700190022002900394032004900720059090
+S3150800938001A90448FFF744FE06B010BD4038024064
+S3150800939000040240000C0240F0B40D460D4B1B6859
+S315080093A0C3F30223C3F10704042C00D90424191DAE
+S315080093B0072901D2002300E0DB1E012606FA04F184
+S315080093C0491E294099409E40761E16403143F0BCFE
+S315080093D000F04CBC0CED00E000F00701054A1068EF
+S315080093E04FF6FF03184040EA01200349084310607E
+S315080093F0704700000CED00E00000FA05F8B51948C2
+S31508009400016841F080510160006800F080500090CA
+S31508009410154C206840F480302060FFF7F1FE0546C1
+S315080094204FF47A7606E0FFF7EBFE401BB04201D90F
+S315080094300320F8BD6068C003F5D5206840F4003005
+S315080094402060FFF7DDFE054606E0FFF7D9FE401B64
+S31508009450B04201D90320F8BD60688003F5D5002025
+S31508009460F8BD000040380240007000402DE9F04782
+S3150800947004460D46002C17D0DFF83081D8F80000D6
+S3150800948000F00F00A84211D2D8F8000020F00F0013
+S315080094902843C8F80000D8F8000000F00F00A842DA
+S315080094A004D00120BDE8F0870120FBE72068404E84
+S315080094B0810712D5400703D5306840F4E050306084
+S315080094C02078000703D5306840F460403060306883
+S315080094D0A16820F0F000084330602078C0072ED03D
+S315080094E0334960680839012806D0022809D0096876
+S315080094F089070BD40120D5E70968890306D401201A
+S31508009500D0E70968890101D40120CBE7316821F049
+S31508009510030101433160FFF773FE074641F28839BC
+S3150800952006E0FFF76DFEC01B484501D90320B9E7E1
+S315080095303068616800F00C00B0EB810FF1D1D8F803
+S31508009540000000F00F00A8420ED9D8F8000020F05D
+S315080095500F002843C8F80000D8F8000000F00F00F4
+S31508009560A84201D001209DE72078400705D530683C
+S31508009570E16820F4E050084330602078000706D5FB
+S315080095803068216920F4604040EAC100306000F08C
+S315080095903BF83168074AC1F30311515CC8400649D4
+S315080095A008600020FFF746FE00207BE7003C0240EB
+S315080095B008380240DEB90008540000200148006857
+S315080095C0704700005400002000B5FFF7F7FF044974
+S315080095D00968044AC1F38221515CC84000BD0000F5
+S315080095E008380240EEB9000800B5FFF7E7FF04495E
+S315080095F00968044AC1F34231515CC84000BD000005
+S3150800960008380240EEB9000810B51748006810F08F
+S315080096100C01164816D04310042912D0082911D176
+S31508009620114C241F216801F03F02216849020AD51E
+S315080096302068C0F38810A0FB03010023FEF752FE42
+S3150800964009E0184610BD21680023C1F38811A1FB63
+S315080096500001FEF747FE2168C1F30141491C490094
+S31508009660B0FBF1F010BD0000083802400024F400F9
+S315080096702DE9F84F04464FF00008002C15D0207845
+S31508009680DFF8C093A9F10407C007A7F1040560D065
+S31508009690D9F80000C0F3810001280CD0D9F80000E1
+S315080096A0C0F38100022803D00CE00120BDE8F88F42
+S315080096B03868400206D5286880034AD5606870BBBA
+S315080096C00120F3E76068B0F5803F11D0A8B1B0F586
+S315080096D0A02F1BD0286820F480302860286820F442
+S315080096E080202860606830B3FFF78AFD06461EE0D2
+S315080096F0286840F480302860F4E7286820F4803031
+S315080097002860286820F480202860EBE7286840F461
+S3150800971080202860286840F480302860E2E718E056
+S31508009720FFF76EFD801B642801D90320BEE7286871
+S315080097308003F5D50DE0FFF763FD064606E0FFF763
+S315080097405FFD801B642801D90320AFE728688003E2
+S31508009750F5D4207880074BD5D9F8000010F00C0F07
+S3150800976008D0D9F80000C0F38100022812D1386861
+S3150800977040020FD42868800704D5E068012801D084
+S31508009780012093E72868216920F0F80040EAC10023
+S3150800979028602DE0E068C8B1286840F0010028601C
+S315080097A0FFF72EFD064606E0FFF72AFD801B022876
+S315080097B001D903207AE728688007F5D52868216942
+S315080097C020F0F80040EAC100286011E0286820F07F
+S315080097D001002860FFF714FD064606E0FFF710FDB6
+S315080097E0801B022801D9032060E728688007F5D482
+S315080097F02078000730D5DFF84CA260690AF16C0AB8
+S31508009800A8B1DAF8000040F00100CAF80000FFF736
+S31508009810F7FC064606E0FFF7F3FC801B022801D991
+S31508009820032043E7DAF800008007F4D514E0DAF8F5
+S31508009830000020F00100CAF80000FFF7E1FC064628
+S3150800984006E0FFF7DDFC801B022801D903202DE77F
+S31508009850DAF800008007F4D42078400775D5DFF8D9
+S31508009860E4A10AF1380ADAF80000C0000CD4DAF8E4
+S31508009870000040F08050CAF80000DAF8000000F056
+S31508009880805000904FF00108DFF8BCB1DBF800000B
+S31508009890C00514D4DBF8000040F48070CBF8000053
+S315080098A0FFF7AEFC064606E0FFF7AAFC801B642815
+S315080098B001D90320FAE6DBF80000C005F4D5DFF885
+S315080098C084B1A0680BF1680B012814D0D0B1052823
+S315080098D025D0DBF8000020F00100CBF80000DBF80B
+S315080098E0000020F00400CBF80000A06870B3FFF772
+S315080098F087FC06462BE0DBF8000040F00100CBF8B9
+S315080099000000F2E7DBF8000020F00100CBF80000C9
+S31508009910DBF8000020F00400CBF80000E5E7DBF8F0
+S31508009920000040F00400CBF80000DBF8000040F02F
+S315080099300100CBF80000D8E7FFF762FC811B41F273
+S315080099408830814203D90320B0E61FE004E0DBF843
+S3150800995000008007F0D510E0FFF752FC064608E045
+S31508009960FFF74EFC811B41F28830814201D9032062
+S315080099709CE6DBF800008007F2D4B8F1010F05D1A8
+S31508009980DAF8000020F08050CAF80000A069E8B3B1
+S31508009990D9F80010C1F38101022951D0022807D055
+S315080099A0286820F080702860FFF72AFC044642E009
+S315080099B0286820F080702860FFF722FC064606E03B
+S315080099C0FFF71EFC801B022801D903206EE62868D3
+S315080099D08001F5D454F81C0F4FF0FF336168E26834
+S315080099E00843A16803EB5202890141EA0241084390
+S315080099F0217C40EA0160217D40EA017038602868D0
+S31508009A0040F080702860FFF7FBFB00E016E0044694
+S31508009A1006E0FFF7F5FB001B022801D9032045E6FF
+S31508009A2028688001F5D509E0FFF7EAFB001B022844
+S31508009A3001D903203AE628688001F5D4002035E6E6
+S31508009A40012033E6083802400070004004284FF031
+S31508009A50E02104D0086920F004000861704708690D
+S31508009A6040F0040008617047704710B5401EB0F119
+S31508009A70807F01D3012010BD4FF0E02460610F21E3
+S31508009A80601700F0F3F80020A0610720206100208D
+S31508009A9010BD10B5FFF7E8FF10BD10B50446002C41
+S31508009AA003D094F8690010B107E0012010BD00202A
+S31508009AB084F86800204600F028F8242084F8690015
+S31508009AC02068016821F001010160204600F026FBAC
+S31508009AD0012818D0606A10B1204600F09CFA206868
+S31508009AE0416821F4904141602068816821F02A018B
+S31508009AF081602068016841F0010101602046BDE8E7
+S31508009B00104000F0ECBA012010BD70472DE9F84F5F
+S31508009B1004460D461646984694F86A00202802D050
+S31508009B200220BDE8F88FFDB1F6B194F86800012867
+S31508009B301CD001204C3420774FF00009C4F820903F
+S31508009B402220A077FFF75CFB8246A681E681FF22EA
+S31508009B5054F8440C4C3C4FF48057B8420DD1206958
+S31508009B6030B1A4F85C201BE00120DAE70220D8E730
+S31508009B7040F2FF10A4F85C0012E07F2118B1B0F1A2
+S31508009B80805F08D00CE0206910B1A4F85C1007E0EB
+S31508009B90A4F85C2004E0206928B13F20A4F85C0002
+S31508009BA0B4F85C601CE0A4F85C10F9E7B4F85A0055
+S31508009BB0401EA4F85A000022534620212046CDF81C
+S31508009BC0008000F029FC08B10320AAE7A068B84283
+S31508009BD001D1206978B12068406A304005F8010B48
+S31508009BE0B4F85A000028E1D1202084F86A0084F8E5
+S31508009BF06890002095E72068406A304025F8020BF7
+S31508009C00EEE710B5FFF70AFB00F086F900F0F0F969
+S31508009C10BDE81040AFF30080002202488021FFF71C
+S31508009C20E7BA00000004024070B500F0DFF9044608
+S31508009C300C4D6868201AB0F5FA7F0AD328780A4BC3
+S31508009C4040B100202870002218468021FFF7D0FA7C
+S31508009C506C6070BD01202870012218468021FFF72C
+S31508009C60C7FAF5E760000020000402400907090E5C
+S31508009C70002806DA00F00F0000F1E02080F8141D35
+S31508009C80704700F1E02080F80014704710B50B48C3
+S31508009C900078410611D480070FD509480068001DD1
+S31508009CA00178FF2909D14078002806D1012100F062
+S31508009CB00FF9BDE81040FEF7BDBC10BD7C000020C2
+S31508009CC09000002010B500F0DFFD00F08FF9144C6D
+S31508009CD000F5FA70206000F089F942F21071084424
+S31508009CE0606001F0E9F800200E49088048800E49B6
+S31508009CF0088048800D49088048804EF6030001F028
+S31508009D001BF900F0FBFD04F1080000F0ADFD06218B
+S31508009D1004F1080000F062FCBDE8104000F078BCD1
+S31508009D20680000208C000020AC000020A80000205D
+S31508009D302DE9F04700F0F6FD354D002708B32880D9
+S31508009D404FF4006000F078FD324CA18988420AD1B0
+S31508009D50012001F007F9288898B100F079FF00F092
+S31508009D6005FE2F800DE040F6060000F065FDA1898E
+S31508009D70884206D100F016FF288810B100F0F6FDDB
+S31508009D802F8000F033F9244E3168884230D301F52C
+S31508009D90FA7131600024DFF88480DFF88490C4EB20
+S31508009DA0041008EB4000C9F80000022001F0DAF8B8
+S31508009DB0288820B100F04CFF00F0D8FD2F80641CE5
+S31508009DC0002CECD00024DFF85C80DFF85C9008EB10
+S31508009DD08410C9F80000052001F0C4F8288820B1CD
+S31508009DE000F036FF00F0C2FD2F80641C002CEED078
+S31508009DF000F0FCF87168884207D342F210700844F4
+S31508009E007060BDE8F04700F0D1BFBDE8F0870000FC
+S31508009E10800000208832002068000020CA38002010
+S31508009E2098000020E83800209C0000200B4A1068A3
+S31508009E30C1B2C0F307231944C0F30743194401EB21
+S31508009E401061002013181B79194489B2401C382860
+S31508009E50F8D3C843401C80B27047000000000020B9
+S31508009E6010B500F015F800280DD108490648086015
+S31508009E70002000220B181A71401C3828FAD3BDE8B6
+S31508009E80104000F039B810BDA2E742CE000000200D
+S31508009E9010B50024054806490068884203D100F039
+S31508009EA009F800B10124204610BD0000000000207A
+S31508009EB0A2E742CE10B50024FFF7B8FF0349898F01
+S31508009EC0884200D10124204610BD00000000002071
+S31508009ED070B504460E460025FFF7DAFF38B1382C70
+S31508009EE005D204482044067100F006F801252846E4
+S31508009EF070BD00000000002010B5FFF797FF01496C
+S31508009F00888710BD0000002010B5FFF77FF9BDE86F
+S31508009F101040FFF7BEBD000010B594B01E4801689A
+S31508009F2041F080510160006800F0805001901B48A4
+S31508009F30016841F440410160006800F44040019026
+S31508009F40012007900004089002240D9480010E90C9
+S31508009F5008200F904FF4D87010901194129407A807
+S31508009F60FFF786FB00B1FEE7FFF748FA00B1FEE708
+S31508009F700F2002900394002004904FF4A0500590FF
+S31508009F804FF480500690072102A8FFF76FFA0028C1
+S31508009F9000D0FEE714B010BD403802400070004003
+S31508009FA00E48016841F4700101600D48016841F0EE
+S31508009FB0010101600A4A0021083211600268094B52
+S31508009FC01A400260031D084A1A60026822F48022B9
+S31508009FD0026003480C3001607047000088ED00E01D
+S31508009FE000380240FFFFF6FE10300024FFF708B9DC
+S31508009FF010B5FFF7E3FA4FF47A71B0FBF1F0FFF70B
+S3150800A00034FD0420FFF722FD0022BDE81040501E53
+S3150800A0101146FFF7C1B990F82410C90706D00168A0
+S3150800A0204A68836A22F400321A434A6090F8241078
+S3150800A030890706D501684A68C36A22F480321A433A
+S3150800A0404A6090F82410490706D501684A68036BE8
+S3150800A05022F480221A434A6090F82410090706D58C
+S3150800A06001684A68436B22F400421A434A6090F832
+S3150800A0702410C90606D501688A68836B22F48052C3
+S3150800A0801A438A6090F82410890606D501688A68FA
+S3150800A090C36B22F400521A438A6090F824104906CA
+S3150800A0A011D501684A68036C22F480121A434A6083
+S3150800A0B0016CB1F5801F06D101684A68436C22F429
+S3150800A0C0C0021A434A6090F82410090606D50168AA
+S3150800A0D04A68806C22F4002202434A60704738B509
+S3150800A0E004460025E566FFF78BF8034620680068F6
+S3150800A0F000070BD56FF07E400090002220464FF4F3
+S3150800A100001100F089F908B1032038BD2020683411
+S3150800A1106070A0702570002038BD00002DE9F04160
+S3150800A1200446102100220025A3682069E669034336
+S3150800A13060693043034320680668AB4F3E401E43C0
+S3150800A140066020684368E66823F440533343436057
+S3150800A150A369206A03432068866826F430661E438E
+S3150800A1608660A24FCE022068A14BB84212D11B6866
+S3150800A17013F0030306D0012B08D0022B04D0032BBF
+S3150800A18001D105E00121A9E00221A7E00421A5E00B
+S3150800A1900821A3E0974FB84212D11B6813F00C03AD
+S3150800A1A006D0042B08D0082B04D00C2B01D105E0CF
+S3150800A1B0002193E0022191E004218FE008218DE03F
+S3150800A1C08D4FB84212D11B6813F0300306D0102BFE
+S3150800A1D008D0202B04D0302B01D105E000217DE0EA
+S3150800A1E002217BE0042179E0082177E0834FB84219
+S3150800A1F012D11B6813F0C00306D0402B08D0802B61
+S3150800A20004D0C02B6AD105E0002167E0022165E091
+S3150800A210042163E0082161E0794FB84215D11B6833
+S3150800A22013F4407309D0B3F5807F0AD0B3F5007FE5
+S3150800A23005D0B3F5407F51D105E000214EE002215B
+S3150800A2404CE004214AE0082148E06E4FB84215D197
+S3150800A2501B6813F4406309D0B3F5806F0AD0B3F5D1
+S3150800A260006F05D0B3F5406F38D105E0012135E020
+S3150800A270022133E0042131E008212FE0624FB84281
+S3150800A28015D11B6813F4405309D0B3F5805F0AD083
+S3150800A290B3F5005F05D0B3F5405F1FD105E0002197
+S3150800A2A01CE002211AE0042118E0082116E0574FA5
+S3150800A2B0B84213D11B6813F4404308D0B3F5804F56
+S3150800A2C009D0B34205D0B3F5404F07D105E00021C8
+S3150800A2D004E0022102E0042100E00821E369B34218
+S3150800A2E040D1092935D2DFE801F0050F19342134A8
+S3150800A2F034342B00FFF768F94100606801EB500120
+S3150800A300B1FBF0F082B225E0FFF76EF94100606814
+S3150800A31001EB5001B1FBF0F082B21BE060683C49EA
+S3150800A32001EB5001B1FBF0F082B213E0FFF76CF9D4
+S3150800A3304100606801EB5001B1FBF0F082B209E020
+S3150800A34060684FF4803101EB5001B1FBF0F082B246
+S3150800A35000E0012522F00F00C2F3420108432168FC
+S3150800A360C8603EE009293BD2DFE801F005111D3A35
+S3150800A370263A3A3A3200FFF727F90146606801EBB8
+S3150800A3805001B1FBF0F0216880B2C86029E0FFF700
+S3150800A3902BF90146606801EB5001B1FBF0F021682A
+S3150800A3A080B2C8601DE061681A4A02EB5102B2FB2E
+S3150800A3B0F1F189B2C16014E0FFF726F90146606839
+S3150800A3C001EB5001B1FBF0F0216880B2C86008E0EB
+S3150800A3D0616806EB5102B2FBF1F189B2C16000E097
+S3150800A3E001252846BDE8F081F369FFEF001001401A
+S3150800A3F0903802400044004000480040004C0040AD
+S3150800A400005000400014014000780040007C0040E5
+S3150800A4100048E8010024F4002DE9F04104460E4600
+S3150800A42017469846069D1DE0681C1BD02DB1FEF701
+S3150800A430E7FEA0EB0800A84214D32068016821F4BF
+S3150800A440D07101602068816821F0010181602020B7
+S3150800A45084F8690084F86A00002084F868000320FC
+S3150800A460BDE8F0812068C06936EA000004D0002003
+S3150800A470B842D9D00020F3E70120F9E710B5002348
+S3150800A480014604480122FFF741FB08B1002010BD30
+S3150800A490012010BDE4310020FF2100F8011B7047A0
+S3150800A4A035220270012242708170C01C704700007C
+S3150800A4B032210170042141700249496AC0F802102C
+S3150800A4C0801D7047543200203721017003214170E6
+S3150800A4D001228270C17006210171401D704700007B
+S3150800A4E036210170042141700249C969C0F8021079
+S3150800A4F0801D70475432002010B58B185B1E0BE088
+S3150800A5000C784A7802EB042292B2104480B2904248
+S3150800A51001D2401C80B2891C9942F1D3994207D1D5
+S3150800A52009780902084480B2884201D2401C80B2E8
+S3150800A53010BDFFF75BBD00002DE9F0410446012080
+S3150800A54020706070164D287EA0700020E070154EB1
+S3150800A5503168616020818021618113490968E16061
+S3150800A56020616061A06104F11C00D5E90512074667
+S3150800A570FDF75BFFA869C0F110013844FDF7A2FF9B
+S3150800A580402104F12C00FDF79DFF802104F16C00A9
+S3150800A590FDF798FF7068C4F8EC00BDE8F08100008C
+S3150800A5A054320020F6B900088C00002000F03AB8B2
+S3150800A5B00749828C0A80C28C4A800649028D0A8025
+S3150800A5C0428D4A800449028E0A80408E4880704730
+S3150800A5D08C000020AC000020A800002038B50B4CE9
+S3150800A5E06061A1610025A5704FF6FF70ADF8000007
+S3150800A5F0ADF802004FF48641684601F07FF96060C5
+S3150800A60010B14FF488418180258038BD543200202E
+S3150800A6100021024801804180704700008C0000201C
+S3150800A620704700002DE9F84F0120814C814D002626
+S3150800A6304FF493784FF002094FF47A774FF0030AF4
+S3150800A640218804F1080242F2107B009241454FD05E
+S3150800A65009DCB1B1A1F580710F391FD0012921D0CC
+S3150800A66016290AD141E0A1F5807155397DD0012915
+S3150800A6707CD015297BD016297AD026800220BDE801
+S3150800A680F88F0120A070276100F004FA216900986C
+S3150800A69000F03FFA002040F20F112180F0B34FF48A
+S3150800A6A0887020802878800703D4009800F024FA60
+S3150800A6B0A8B32878800703D500F08CF9022836D08D
+S3150800A6C020694EF66021884201DA40002061A078B0
+S3150800A6D00228D9D1276100F0F5F92169009800F020
+S3150800A6E018FA002040F22511218018B3A4F800803A
+S3150800A6F02878800703D4009800F0FEF9E0B128789E
+S3150800A700800703D500F066F9052817D02069584553
+S3150800A71037DC00F57A702061A07801E003E004E0F8
+S3150800A7200328D8D10CE00320A9E70020A7E784F87E
+S3150800A7300290CFE70320A2E70020A0E784F802A052
+S3150800A7403B48FFF735FF208C00F076F84FEA0048C3
+S3150800A750608C00F071F840EA080040084FF00042AB
+S3150800A76000EB4001C1EBC01103E018E01BE02FE04D
+S3150800A77032E0B2EBC10F07D94FF47A714843206132
+S3150800A78005E0268000207AE76FF000402061216905
+S3150800A790009800F0BEF9002040F25511218098B3C8
+S3150800A7A04FF4AB702080009800F0A6F968B384F8DF
+S3150800A7B002902761FFF72CFFFFF732FF00F082F9BE
+S3150800A7C02169009800F0A5F900204FF4B5712180A1
+S3150800A7D000B340F26B1020802878800703D40098D5
+S3150800A7E000F08AF9C0B12878800703D500F0F2F89E
+S3150800A7F0052813D02069584516DC00F57A702061C3
+S3150800A800A0780328DAD10BE000E001E0032036E760
+S3150800A810002034E7032032E7002030E784F802A05E
+S3150800A8200348FFF7C5FE8EE72680002027E70000CD
+S3150800A830543200207C000020010241EA102080B238
+S3150800A8407047FFF7DEF9FFF70BFBFFF73BFAFDF75B
+S3150800A85005FF00210846FFF73BFBFFF7E5F9FFF781
+S3150800A86067FAFDF7F9FEF8E706490A7802704A78AA
+S3150800A87042708A788270CA78C2700A7902714979F8
+S3150800A880417170474C00002010B517480821017027
+S3150800A89000224270272181706921C1705B210171F4
+S3150800A8A0452141711249114B0B6001234B600A8205
+S3150800A8B048618A61CA61D80508620846FEF70EF93A
+S3150800A8C00B4904230B4A0A48C831FEF78AF80A4A94
+S3150800A8D004230748A2F58071FEF74CF8BDE810403E
+S3150800A8E00348FEF7ACBA00004C0000200080024086
+S3150800A8F0B8000020D01900200002002007480849A7
+S3150800A90002780A7042784A7082788A70C278CA7069
+S3150800A91002790A7140794871704700004C0000209E
+S3150800A9207600002070B500250E48FEF797F8B8B9EE
+S3150800A9300C4CA08F85B2216C0B482A46FDF775FD95
+S3150800A940216B086840F0004008600020A063216879
+S3150800A95001F580514A69120602D580224A6188604B
+S3150800A960284670BDB8000020883200202DE9F04145
+S3150800A9700126154FFD6AFFF739FB00F1FA0405E0D9
+S3150800A980FFF734FBA04201D9002602E02868002818
+S3150800A990F6DB012E0BD10D480488F86A806822463A
+S3150800A9A00B49FDF742FD08482146FEF76AFA386862
+S3150800A9B000F580504169890603D5202141610021AF
+S3150800A9C04160BDE8F0810000B8000020800000204A
+S3150800A9D08832002070B50F480468207802280DD107
+S3150800A9E00D490422201DFDF7F4FC38B90B4D04F17E
+S3150800A9F01C00D5E90512FDF7ECFC08B1002070BD76
+S3150800AA00206968620648018804F1F000BDE87040D4
+S3150800AA1000F008B890000020F6B90008543200206B
+S3150800AA208000002010B544180023194A29E001784F
+S3150800AA30332920D006DC01290BD003290DD006299D
+S3150800AA401CD10EE0352910D0362910D0FF2915D192
+S3150800AA501BE0D0F80210916210E0D0F802101163E2
+S3150800AA600CE0D0F80210D16208E0837806E0D0F84E
+S3150800AA700210D16102E0D0F8021011624178801C00
+S3150800AA800844A042D3D3184610BD184610BD00008E
+S3150800AA905432002070B50A4D2C682046FFF74CFD4D
+S3150800AAA0012104F1F000FFF7FBFCFFF70DFDFFF7AE
+S3150800AAB0F3FC01462868BDE87040091A00F00ABF91
+S3150800AAC09000002070B50B4D2C682046FFF734FD2A
+S3150800AAD0032104F1F000FFF7E3FCFFF701FDFFF7A0
+S3150800AAE0E7FCFFF7D9FC01462868BDE87040091A5B
+S3150800AAF000F0F0BE9000002010B50446FFF719FDDF
+S3150800AB002168401A6168884201DB012010BD0020D7
+S3150800AB1010BD10B504466160FFF70BFD206010BD3F
+S3150800AB2030B5144DC2780A44D4B2EC70827802EB80
+S3150800AB301122D2B2AA7043786B7000782870B2EBF3
+S3150800AB40112F05D25B1CDBB26B700BB9401C287049
+S3150800AB50C8B284420DD2521CD0B2A870002808D1BF
+S3150800AB606878401CC0B26870002802D12878401C5A
+S3150800AB70287030BDA400002010B5094C0146E069D4
+S3150800AB800830FFF7CDFFE06904F128010A78027260
+S3150800AB904A7842728A788272C978C17210BD0000FA
+S3150800ABA07C0000202DE9F047254D002029882A2918
+S3150800ABB002D22880BDE8F08728804FF40076214C21
+S3150800ABC0214F224602F11601B4F81490881DB2F8F6
+S3150800ABD026C0B7F80080B9F5807F128D7B8809D02A
+S3150800ABE0B145E7D1C445E5D19A42E3D1BDE8F0477E
+S3150800ABF000F0FEB8C445DDD19A42DBD100F0F8F882
+S3150800AC00A682D4F816002062618BA1840F4B1A68BD
+S3150800AC10C4F816209B886383C4F8062063812060E5
+S3150800AC20A180A08BE084E08B20853888A083788873
+S3150800AC30E0834FF4C160A0812A202880BAE700008B
+S3150800AC4080000020883200208C000020760000203A
+S3150800AC502DE9F05FDFF82CA14FF6FF724A4B5046FC
+S3150800AC60BAF81E10008C9C8891421D6809D1904242
+S3150800AC7007D146480168CAF800108088AAF8040077
+S3150800AC803FE0434B434F1A88B7F80090B7F8028065
+S3150800AC9001EA0206404F09EA0202964206D15A889C
+S3150800ACA000EA020308EA0202934205D03B480188FB
+S3150800ACB039804088788001E0398078804FF0000B31
+S3150800ACC0354B1B1F83F800B03E88DFF8D4C07F8859
+S3150800ACD0197801EB41000CEB80000288964202D1FC
+S3150800ACE04288974204D0491CC9B219700829EFD383
+S3150800ACF01978082912D04168CAF800100089AAF8FC
+S3150800AD000400CAF80650AAF80A400820AAF80C0057
+S3150800AD10244801880E310180BDE8F09F1948FF22BA
+S3150800AD200621FDF7C7FBCAF820B0AAF824B0CAF86E
+S3150800AD300650AAF80A40CAF81650AAF81A40AAF8FD
+S3150800AD402660AAF82870AAF81C90AAF81E804FF464
+S3150800AD508070AAF81400AAF80E000820AAF81000B5
+S3150800AD6006208AF8120004208AF813004FF4C160FE
+S3150800AD70AAF80C000C490348363008602A2109480D
+S3150800AD800180C9E78832002076000020FEB9000855
+S3150800AD90AC0000208C000020B4000020A800002091
+S3150800ADA0283900208000002090000020F0B50E4AC7
+S3150800ADB09078401CC5B29570002313700B4E11781D
+S3150800ADC001EB410006EB8000048847883C4304D029
+S3150800ADD0847A2C1B782C00DB0360491CC8B21070DF
+S3150800ADE00828ECD3F0BD0000B00000202839002068
+S3150800ADF02DE9F0412E4F4FF0000C87F800C02D4E7C
+S3150800AE003B7803EB430206EB8202148884B155882B
+S3150800AE1075B1B0F80080A0450AD14488AC4207D184
+S3150800AE200868506088881081B8789072BDE8F0810B
+S3150800AE305B1CDAB23A70082AE2D387F800C03B787E
+S3150800AE4003EB430206EB820214880CB9548824B13A
+S3150800AE505B1CDBB23B70082BF1D33B78082B1DD16A
+S3150800AE6087F803C087F801C087F800C0BC783A782D
+S3150800AE7002EB420306EB8303FD789B7AE31AAB42A7
+S3150800AE8001DDFB707A70521CD2B23A70082AEED3F2
+S3150800AE907A783A7002EB420206EB8202006810608A
+S3150800AEA00868506088881081B8789072BEE70000FC
+S3150800AEB0B00000202839002010B5154A002151702D
+S3150800AEC002F10803507823F81010401CC0B25070E5
+S3150800AED00028F7D051700F4B5078C0EB001403EBE5
+S3150800AEE044046176401CC0B250700028F4D04FF478
+S3150800AEF0806090815170074B1E33507803EB8014A5
+S3150800AF00A180401CC0B250700028F6D010BD0000C9
+S3150800AF107C000020CA38002010B5064914220020FB
+S3150800AF20FFF7EAFA18B1BDE81040FFF785BC4FF6FF
+S3150800AF30FF7010BD9632002010B5094A00215170E5
+S3150800AF4002F10803517833F811402CB1491CC9B2F3
+S3150800AF5051700029F6D010BD517823F8110010BDA4
+S3150800AF607C0000202DE9F05FF84FFC690026F84DBB
+S3150800AF70042805F1360A77D0C7F814A0C7F818A030
+S3150800AF8003284FF0010B4FF0100909D0022814D0FE
+S3150800AF90052805F12A047BD0A87B452843D185E0FE
+S3150800AFA0607E00F00F000328F8D1208A0028F5D12A
+S3150800AFB008203870FEF76AFEA6E3E4492431C8780B
+S3150800AFC0401C10F0FF00C8700ED18878401C10F0A5
+S3150800AFD0FF00887008D14878401C10F0FF004870C0
+S3150800AFE002D10878401C0870BE80FE80607E072863
+S3150800AFF012D0052810D0002815D0218AA9B3A07E22
+S3150800B000411EA1760FD2E07E082824D0617E02294F
+S3150800B0100AD0012908D009E0A07E401CC0B2A0765B
+S3150800B0207828BBD16676ECE0052814D0042800D928
+S3150800B030042003218140A176E07E401CE076607EF4
+S3150800B04000F00F000928EED2DFE800F0DBFC11144F
+S3150800B050FBDBFBDBFB00667680203870FEF716FE0E
+S3150800B060142085F82F00D2E39EE008E010E085F86A
+S3150800B0702F60E4E104203870FEF708FE62E300F072
+S3150800B0800F000328CFD108203870FEF7FFFD3BE3F9
+S3150800B090386A80880028C6D0FE617C61BC61FE8063
+S3150800B0A0BE8008203870FFF781FA7DE0297C687C2D
+S3150800B0B000EB0120B9888842B5D8B880287D80067B
+S3150800B0C0B1D1687D0028AED1A048103001884088EB
+S3150800B0D001B928B1EA8B8A42A5D1298C8142A2D12D
+S3150800B0E0FFF71AFF4FF6FF7840459CD1E87D062802
+S3150800B0F004D011280FD0012895D115E000F0FAFBED
+S3150800B100404590D1934CA8466A8C6B8B2146B5F87E
+S3150800B1101CC0A88C9BE0B8881C38B8808D481E30A7
+S3150800B120386200F1400269E095F822000828A9D1A2
+S3150800B13085F822604FF6F771A88C884202D3093049
+S3150800B140A88401E00830A884688BE883A88B288443
+S3150800B1507E481030018869834088A883B5E38188D2
+S3150800B160F1B3AB8C8B4247D1C18829B16B8C8B422A
+S3150800B17002D0B1F58A4F3FD1018809B943885BB13E
+S3150800B180414502D14388434506D06B8B8B4233D168
+S3150800B190A98B438899422FD1FE61022038707C61C1
+S3150800B1A0BC61FE80FFF702FAF988002929D001F16F
+S3150800B1B01C00B880020A2A746874386A027AAA756A
+S3150800B1C01122EA750831C1F3072242EA0121E9840E
+S3150800B1D02E8581886984C188A9845C49103100E07C
+S3150800B1E00AE00A886A834988A9830188E98340882E
+S3150800B1F02884C7F814A058E340303862386A904269
+S3150800B200ADD33AE394F819A0BAF1000F1ED0B4F8FA
+S3150800B21004A050451AD1B4F806A0524516D1B4F880
+S3150800B22000A0534512D1B4F802A0D4450ED1FC6152
+S3150800B2303E7098F82F0041077CD566762020387036
+S3150800B24001E02DE2F9E0FEF721FD16E31E348C42FB
+S3150800B250D8D998F82F2002F03F02022A10D1F88197
+S3150800B2607E703A4B08337A7833F81240844202D11A
+S3150800B27000247E705FE0521CD2B27A70002AF2D0A7
+S3150800B28098F82F004007BCD4142088F82F002820EF
+S3150800B290B880502088F82E0098F8293098F82D00A4
+S3150800B2A088F8290098F8281098F82C0088F82800BB
+S3150800B2B088F82C1098F8272098F82B0088F827008B
+S3150800B2C088F82B2098F82600787098F82A4088F88D
+S3150800B2D0264088F82A005B1C13F0FF0388F82D30F7
+S3150800B2E00ED1491C11F0FF0188F82C1008D1521C08
+S3150800B2F012F0FF0188F82B1002D1401C88F82A00AA
+S3150800B300B8F82200F881B8F82410A8F82210A8F88E
+S3150800B3102400B8F81A00A8F81E00B8F81C00A8F807
+S3150800B32020000A4810300188A8F81A104088A8F8A2
+S3150800B3301C00ABE2AAE07A78C2EB021001EB4000EF
+S3150800B340437E4BB1072B0DD013E000007C00002094
+S3150800B35088320020CA3800207878C0EB001001EB4C
+S3150800B36040040BE024B1837E94F81AC0634500D9E3
+S3150800B3700446521CD0B278700028DCD0002C71D05C
+S3150800B380BA46FC610320A0762076A6750420E075EF
+S3150800B390E676B8F82400A080B8F82200E080B8F86D
+S3150800B3A01A002080B8F81C00608084F819B0F948A3
+S3150800B3B001782173417861738178A173C078E0734D
+S3150800B3C0A4F810B098F82900E07298F82800A0723E
+S3150800B3D098F82700607298F8260020720120FFF777
+S3150800B3E0CBFB98F82E0000F0F001502925D98AF8F1
+S3150800B3F001606FF0040101EB101319E008EB00027D
+S3150800B40092F836108AF80210B9B1012902D0022939
+S3150800B41004D007E0401C8AF8010009E092F83710CA
+S3150800B420042920D092F8371039B108448AF8010067
+S3150800B4309AF80100B0EB830FE0DB85F82F902E35E4
+S3150800B440687840F00200687002202872042068724A
+S3150800B4500620A8720A20E8722C20B880602005F819
+S3150800B4602E09D9E1FEE09AF8010092F83810404416
+S3150800B47090F8390040EA0120AAF80E0040F20A6165
+S3150800B480884200D908466082A082D6E798F82E102E
+S3150800B490090989007970BA88511A143989B2B980AC
+S3150800B4A0627E02F00F02022A03D100F03F02122A3E
+S3150800B4B017D009B9810714D098F826104346227A7E
+S3150800B4C091427DD193F82710627A9142F9D193F887
+S3150800B4D02810A27A9142F4D193F82910E27A91427F
+S3150800B4E0EFD1C006C2463DD5218AD9B304F10C0076
+S3150800B4F0FFF716FBA74B9AF82A101B1D18788142EE
+S3150800B50030D19AF82B20D64659788A422AD19EF805
+S3150800B5102CC09A78944525D19EF82DC0DB789C4599
+S3150800B52020D120736173A273E373E07EA8B9207EED
+S3150800B530A17E401AA17DA0EBD10040B20144C9B258
+S3150800B540A175002801DA404240B2E27DA0EB9200E4
+S3150800B5501044E07500EBD100207687F800B0207E15
+S3150800B560A0762682607E00F00F0109297AD2DFE8EC
+S3150800B57001F07905177AF8F7F627F5003878C00745
+S3150800B58070D003206076402038702682B88818B1BB
+S3150800B59042213970FFF7F0FAFE80FEF777FBB3E039
+S3150800B5A03878C00705D09AF82F0000F03F00122817
+S3150800B5B007D020203870FEF769FBF86946765FE603
+S3150800B5C023E19AF82E0000F0F001502920D97E7068
+S3150800B5D06FF0040101EB101316E00AEB000292F873
+S3150800B5E03610B970A1B1012902D0022903D006E0AC
+S3150800B5F0401C787008E092F83710042921D092F898
+S3150800B600371029B1084478707878B0EB830FE4DBFB
+S3150800B610032060769AF8260020729AF8270060724E
+S3150800B6209AF82800A0729AF82900E0720120FFF71C
+S3150800B630A3FA422038702682BE80FE80FEF726FBDB
+S3150800B64062E0787892F83810504490F8390040EA69
+S3150800B6500120F88140F20A61884200D908466082D2
+S3150800B660A082D5E746E09AF82F10CA071CD0C20672
+S3150800B6701AD4208AF0BBB888401C80B2FFF77CFA3F
+S3150800B680387840F010003870B98811B140F00200DF
+S3150800B6903870FEF7FBFAA4F810B008206076E67654
+S3150800B6A0112085F82F00B2E089060BD59AF83420C8
+S3150800B6B09AF8351041EA02217A690A447A61BA8809
+S3150800B6C0511AB980B98841B1C00606D4387840F015
+S3150800B6D0020038700846FFF74FFA9AF830109AF8C1
+S3150800B6E0310000EB012080B2F881A18A814200D3A3
+S3150800B6F010B900E04DE0F981F88960823878800752
+S3150800B70047D0FE80FEF7C2FA3878810605D5FE8056
+S3150800B7106676142085F82F0079E0C10609D5FE80E3
+S3150800B720A4F810B004206076E676112085F82F007C
+S3150800B7306DE0F98829B1C00700D02682208A88B131
+S3150800B740F880E676B8697861F88890B1208A80B181
+S3150800B7502830B880182085F82F005AE011E086E0D6
+S3150800B7603EE019E0608A884200D2F880F888208294
+S3150800B770E7E7387880070CD52820B88085F82F9019
+S3150800B78047E03878C00778D0667687F80090FEF7E5
+S3150800B7907DFA72E0A0000020B88808B1FFF7ECF93E
+S3150800B7A09AF82F00C00711D03878C00704D00720B0
+S3150800B7B06076A676268201E0062060760120FFF7ED
+S3150800B7C0DBF987F80090FEF761FA1EE03878C007C3
+S3150800B7D003D00520607626824FE0B888A8B94CE0E9
+S3150800B7E0B88808B1FFF7C8F99AF82F00C0070AD039
+S3150800B7F007206076A6760120FFF7BEF987F8009045
+S3150800B800FEF744FA01E0B88880B388F82F9028201C
+S3150800B810B880502085F82E001835207AA874607AEA
+S3150800B820E874A07A2875E07A6875207BA873607B2F
+S3150800B830E873A07B2874E07B6874062005F8010C81
+S3150800B840A1886981E188A98121490A886A8049888D
+S3150800B850A9802188E98061882981183D617EC90609
+S3150800B8600FD585F8316085F830600FE005E0387847
+S3150800B870C00702D007206076A676BE803E70BDE877
+S3150800B880F09F85F830000A2085F831004020A87519
+S3150800B890B888010A2974687485F8356085F83460B3
+S3150800B8A06E8600F027F8C04368864520A873EE73B5
+S3150800B8B06E752E757889401C7881010AA974E8741A
+S3150800B8C02E83FFF729FBC04328833E70D7E7000085
+S3150800B8D08C0000200346002908DD05488AB2C2808C
+S3150800B8E08069834202D01946FCF79FBD7047000065
+S3150800B8F07C000020062000F04DB800002DE9F0413C
+S3150800B90004460F46214B0025214A4FF4FA484FF4C6
+S3150800B91080569089401C80B29081404500D396811C
+S3150800B92055709089FEF788FF0146507803EB801C16
+S3150800B930BCF804C06145ECD0401CC0B25070002869
+S3150800B940EFD000205570517803EB8116B688A6B162
+S3150800B950491CC9B251700029F5D090B191890A02E3
+S3150800B96042EA11218180C7806CB1218801806188F3
+S3150800B970418040210172BDE8F081507803EB8010C8
+S3150800B980EBE70020F7E70560F3E70000E83800205A
+S3150800B9907C00002010B50E496FF013034A7C097C21
+S3150800B9A003EB012111448CB2204480B208490822D5
+S3150800B9B01A31FEF7A1FD064922462231FEF79CFD03
+S3150800B9C018B1BDE81040FEF737BF4FF6FF7010BD3F
+S3150800B9D0883200204FF04070E1EE100A70470000F0
+S3150800B9E00000000000000102030406070809000021
+S3150800B9F0000001020304ADDE122363825363FFFFD6
+S3150800BA00FFFFFFFF24BA000840000020780000006E
+S3150800BA10388200089CBA0008B8000020303F0000B1
+S3150800BA205482000801000000100000000000000019
+S3150800BA3000000000000000000024F40000000000E0
+S3150800BA4000000000000000000000000000000000E8
+S3150800BA5000000000000000000000000000000000D8
+S3150800BA6000000000000000000000000000000000C8
+S3150800BA7000000000000000000000000000000000B8
+S3150800BA8000000000000000000000000000000000A8
+S3110800BA900000000000000000000000009C
+S705080081FD74
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/boot.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/boot.c
new file mode 100644
index 00000000..d3439c8d
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/boot.c
@@ -0,0 +1,226 @@
+/************************************************************************************//**
+* \file Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/boot.c
+* \brief Demo program bootloader interface source file.
+* \ingroup Prog_ARMCM7_STM32F7_Nucleo_F767ZI_Keil
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2019 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+
+/****************************************************************************************
+* Include files
+****************************************************************************************/
+#include "header.h" /* generic header */
+
+
+/****************************************************************************************
+* Function prototypes
+****************************************************************************************/
+#if (BOOT_COM_UART_ENABLE > 0)
+static void BootComUartInit(void);
+static void BootComUartCheckActivationRequest(void);
+#endif
+
+
+/************************************************************************************//**
+** \brief Initializes the communication interface.
+** \return none.
+**
+****************************************************************************************/
+void BootComInit(void)
+{
+#if (BOOT_COM_UART_ENABLE > 0)
+ BootComUartInit();
+#endif
+} /*** end of BootComInit ***/
+
+
+/************************************************************************************//**
+** \brief Receives the CONNECT request from the host, which indicates that the
+** bootloader should be activated and, if so, activates it.
+** \return none.
+**
+****************************************************************************************/
+void BootComCheckActivationRequest(void)
+{
+#if (BOOT_COM_UART_ENABLE > 0)
+ BootComUartCheckActivationRequest();
+#endif
+} /*** end of BootComCheckActivationRequest ***/
+
+
+/************************************************************************************//**
+** \brief Bootloader activation function.
+** \return none.
+**
+****************************************************************************************/
+void BootActivate(void)
+{
+ /* perform software reset to activate the bootoader again */
+ NVIC_SystemReset();
+} /*** end of BootActivate ***/
+
+
+#if (BOOT_COM_UART_ENABLE > 0)
+/****************************************************************************************
+* U N I V E R S A L A S Y N C H R O N O U S R X T X I N T E R F A C E
+****************************************************************************************/
+
+/****************************************************************************************
+* Macro definitions
+****************************************************************************************/
+/** \brief Timeout time for the reception of a CTO packet. The timer is started upon
+ * reception of the first packet byte.
+ */
+#define UART_CTO_RX_PACKET_TIMEOUT_MS (100u)
+
+
+/****************************************************************************************
+* Local data declarations
+****************************************************************************************/
+/** \brief UART handle to be used in API calls. */
+static UART_HandleTypeDef uartHandle;
+
+
+/****************************************************************************************
+* Function prototypes
+****************************************************************************************/
+static unsigned char UartReceiveByte(unsigned char *data);
+
+
+/************************************************************************************//**
+** \brief Initializes the UART communication interface.
+** \return none.
+**
+****************************************************************************************/
+static void BootComUartInit(void)
+{
+ /* Configure UART peripheral. */
+ uartHandle.Instance = USART3;
+ uartHandle.Init.BaudRate = BOOT_COM_UART_BAUDRATE;
+ uartHandle.Init.WordLength = UART_WORDLENGTH_8B;
+ uartHandle.Init.StopBits = UART_STOPBITS_1;
+ uartHandle.Init.Parity = UART_PARITY_NONE;
+ uartHandle.Init.Mode = UART_MODE_TX_RX;
+ uartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+ uartHandle.Init.OverSampling = UART_OVERSAMPLING_16;
+ uartHandle.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
+ uartHandle.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
+ /* Initialize the UART peripheral. */
+ HAL_UART_Init(&uartHandle);
+} /*** end of BootComUartInit ***/
+
+
+/************************************************************************************//**
+** \brief Receives the CONNECT request from the host, which indicates that the
+** bootloader should be activated and, if so, activates it.
+** \return none.
+**
+****************************************************************************************/
+static void BootComUartCheckActivationRequest(void)
+{
+ static unsigned char xcpCtoReqPacket[BOOT_COM_UART_RX_MAX_DATA+1];
+ static unsigned char xcpCtoRxLength;
+ static unsigned char xcpCtoRxInProgress = 0;
+ static unsigned long xcpCtoRxStartTime = 0;
+
+ /* start of cto packet received? */
+ if (xcpCtoRxInProgress == 0)
+ {
+ /* store the message length when received */
+ if (UartReceiveByte(&xcpCtoReqPacket[0]) == 1)
+ {
+ /* check that the length has a valid value. it should not be 0 */
+ if ( (xcpCtoReqPacket[0] > 0) &&
+ (xcpCtoReqPacket[0] <= BOOT_COM_UART_RX_MAX_DATA) )
+ {
+ /* store the start time */
+ xcpCtoRxStartTime = TimerGet();
+ /* indicate that a cto packet is being received */
+ xcpCtoRxInProgress = 1;
+ /* reset packet data count */
+ xcpCtoRxLength = 0;
+ }
+ }
+ }
+ else
+ {
+ /* store the next packet byte */
+ if (UartReceiveByte(&xcpCtoReqPacket[xcpCtoRxLength+1]) == 1)
+ {
+ /* increment the packet data count */
+ xcpCtoRxLength++;
+
+ /* check to see if the entire packet was received */
+ if (xcpCtoRxLength == xcpCtoReqPacket[0])
+ {
+ /* done with cto packet reception */
+ xcpCtoRxInProgress = 0;
+
+ /* check if this was an XCP CONNECT command */
+ if ((xcpCtoReqPacket[1] == 0xff) && (xcpCtoReqPacket[2] == 0x00))
+ {
+ /* connection request received so start the bootloader */
+ BootActivate();
+ }
+ }
+ }
+ else
+ {
+ /* check packet reception timeout */
+ if (TimerGet() > (xcpCtoRxStartTime + UART_CTO_RX_PACKET_TIMEOUT_MS))
+ {
+ /* cancel cto packet reception due to timeout. note that this automatically
+ * discards the already received packet bytes, allowing the host to retry.
+ */
+ xcpCtoRxInProgress = 0;
+ }
+ }
+ }
+} /*** end of BootComUartCheckActivationRequest ***/
+
+
+/************************************************************************************//**
+** \brief Receives a communication interface byte if one is present.
+** \param data Pointer to byte where the data is to be stored.
+** \return 1 if a byte was received, 0 otherwise.
+**
+****************************************************************************************/
+static unsigned char UartReceiveByte(unsigned char *data)
+{
+ HAL_StatusTypeDef result;
+
+ /* receive a byte in a non-blocking manner */
+ result = HAL_UART_Receive(&uartHandle, data, 1, 0);
+ /* process the result */
+ if (result == HAL_OK)
+ {
+ /* success */
+ return 1;
+ }
+ /* error occurred */
+ return 0;
+} /*** end of UartReceiveByte ***/
+#endif /* BOOT_COM_UART_ENABLE > 0 */
+
+
+/*********************************** end of boot.c *************************************/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/boot.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/boot.h
new file mode 100644
index 00000000..301beec8
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/boot.h
@@ -0,0 +1,40 @@
+/************************************************************************************//**
+* \file Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/boot.h
+* \brief Demo program bootloader interface header file.
+* \ingroup Prog_ARMCM7_STM32F7_Nucleo_F767ZI_Keil
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2019 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+#ifndef BOOT_H
+#define BOOT_H
+
+/****************************************************************************************
+* Function prototypes
+****************************************************************************************/
+void BootComInit(void);
+void BootComCheckActivationRequest(void);
+void BootActivate(void);
+
+
+#endif /* BOOT_H */
+/*********************************** end of boot.h *************************************/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/header.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/header.h
new file mode 100644
index 00000000..c09baa26
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/header.h
@@ -0,0 +1,44 @@
+/************************************************************************************//**
+* \file Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/header.h
+* \brief Generic header file.
+* \ingroup Prog_ARMCM7_STM32F7_Nucleo_F767ZI_Keil
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2019 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+#ifndef HEADER_H
+#define HEADER_H
+
+/****************************************************************************************
+* Include files
+****************************************************************************************/
+#include "../Boot/blt_conf.h" /* bootloader configuration */
+#include "stm32f7xx.h" /* STM32 CPU and HAL header */
+#include "boot.h" /* bootloader interface driver */
+#include "led.h" /* LED driver */
+#include "timer.h" /* Timer driver */
+#include "net.h" /* TCP/IP server application */
+#include "shared_params.h" /* Shared parameters header. */
+
+
+#endif /* HEADER_H */
+/*********************************** end of header.h ***********************************/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/ide/stm32f767.uvoptx b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/ide/stm32f767.uvoptx
new file mode 100644
index 00000000..08be3e34
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/ide/stm32f767.uvoptx
@@ -0,0 +1,1232 @@
+
+
+
+ 1.0
+
+ ### uVision Project, (C) Keil Software
+
+
+ *.c
+ *.s*; *.src; *.a*
+ *.obj; *.o
+ *.lib
+ *.txt; *.h; *.inc
+ *.plm
+ *.cpp
+ 0
+
+
+
+ 0
+ 0
+
+
+
+ Target
+ 0x4
+ ARM-ADS
+
+ 216000000
+
+ 1
+ 1
+ 0
+ 1
+ 0
+
+
+ 1
+ 65535
+ 0
+ 0
+ 0
+
+
+ 79
+ 66
+ 8
+
+
+
+ 1
+ 1
+ 1
+ 0
+ 1
+ 1
+ 0
+ 1
+ 0
+ 0
+ 0
+ 0
+
+
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 0
+ 0
+
+
+ 1
+ 0
+ 1
+
+ 18
+
+ 0
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 0
+ 0
+ 1
+ 0
+ 0
+ 5
+
+
+
+
+
+
+
+
+
+
+ STLink\ST-LINKIII-KEIL_SWO.dll
+
+
+
+ 0
+ ARMRTXEVENTFLAGS
+ -L70 -Z18 -C0 -M0 -T1
+
+
+ 0
+ DLGTARM
+ (1010=-1,-1,-1,-1,0)(6017=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(6016=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0)
+
+
+ 0
+ ARMDBGFLAGS
+
+
+
+ 0
+ DLGUARM
+ (105=-1,-1,-1,-1,0)
+
+
+ 0
+ UL2CM3
+ UL2CM3(-S0 -C0 -P0 -FD20020000 -FC1000 -FN2 -FF0STM32F7x_2048 -FS08000000 -FL0200000 -FF1STM32F7xTCM_2048 -FS1200000 -FL1200000 -FP0($$Device:STM32F767ZITx$CMSIS\Flash\STM32F7x_2048.FLM) -FP1($$Device:STM32F767ZITx$CMSIS\Flash\STM32F7xTCM_2048.FLM))
+
+
+ 0
+ ST-LINKIII-KEIL_SWO
+ -U066CFF504955657867151635 -O10446 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("ARM CoreSight SW-DP (ARM Core") -D00(5BA02477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC1000 -FN2 -FF0STM32F7x_2048.FLM -FS08000000 -FL0200000 -FP0($$Device:STM32F767ZITx$CMSIS\Flash\STM32F7x_2048.FLM) -FF1STM32F7xTCM_2048.FLM -FS1200000 -FL1200000 -FP1($$Device:STM32F767ZITx$CMSIS\Flash\STM32F7xTCM_2048.FLM)
+
+
+
+
+
+ 1
+ 0
+ 0x20000000
+ 0
+
+
+
+ 0
+
+
+ 0
+ 1
+ 1
+ 0
+ 0
+ 0
+ 0
+ 1
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+
+
+
+ 0
+ 0
+ 0
+
+
+
+
+
+
+
+
+
+ 1
+ 0
+ 0
+ 2
+ 10000000
+
+
+
+
+
+ Lib
+ 1
+ 0
+ 0
+ 0
+
+ 1
+ 1
+ 5
+ 0
+ 0
+ 0
+ ..\lib\CMSIS\Device\ST\STM32F7xx\Include\stm32f7xx.h
+ stm32f7xx.h
+ 0
+ 0
+
+
+ 1
+ 2
+ 5
+ 0
+ 0
+ 0
+ ..\lib\CMSIS\Device\ST\STM32F7xx\Include\stm32f767xx.h
+ stm32f767xx.h
+ 0
+ 0
+
+
+ 1
+ 3
+ 5
+ 0
+ 0
+ 0
+ ..\lib\CMSIS\Device\ST\STM32F7xx\Include\system_stm32f7xx.h
+ system_stm32f7xx.h
+ 0
+ 0
+
+
+ 1
+ 4
+ 5
+ 0
+ 0
+ 0
+ ..\lib\CMSIS\Include\cmsis_armcc.h
+ cmsis_armcc.h
+ 0
+ 0
+
+
+ 1
+ 5
+ 5
+ 0
+ 0
+ 0
+ ..\lib\CMSIS\Include\core_cm7.h
+ core_cm7.h
+ 0
+ 0
+
+
+ 1
+ 6
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal.h
+ stm32f7xx_hal.h
+ 0
+ 0
+
+
+ 1
+ 7
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_cortex.h
+ stm32f7xx_hal_cortex.h
+ 0
+ 0
+
+
+ 1
+ 8
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_def.h
+ stm32f7xx_hal_def.h
+ 0
+ 0
+
+
+ 1
+ 9
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_dma.h
+ stm32f7xx_hal_dma.h
+ 0
+ 0
+
+
+ 1
+ 10
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_dma_ex.h
+ stm32f7xx_hal_dma_ex.h
+ 0
+ 0
+
+
+ 1
+ 11
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_eth.h
+ stm32f7xx_hal_eth.h
+ 0
+ 0
+
+
+ 1
+ 12
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_flash.h
+ stm32f7xx_hal_flash.h
+ 0
+ 0
+
+
+ 1
+ 13
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_flash_ex.h
+ stm32f7xx_hal_flash_ex.h
+ 0
+ 0
+
+
+ 1
+ 14
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_gpio.h
+ stm32f7xx_hal_gpio.h
+ 0
+ 0
+
+
+ 1
+ 15
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_gpio_ex.h
+ stm32f7xx_hal_gpio_ex.h
+ 0
+ 0
+
+
+ 1
+ 16
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_i2c.h
+ stm32f7xx_hal_i2c.h
+ 0
+ 0
+
+
+ 1
+ 17
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_i2c_ex.h
+ stm32f7xx_hal_i2c_ex.h
+ 0
+ 0
+
+
+ 1
+ 18
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_pwr.h
+ stm32f7xx_hal_pwr.h
+ 0
+ 0
+
+
+ 1
+ 19
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_pwr_ex.h
+ stm32f7xx_hal_pwr_ex.h
+ 0
+ 0
+
+
+ 1
+ 20
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_rcc.h
+ stm32f7xx_hal_rcc.h
+ 0
+ 0
+
+
+ 1
+ 21
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_rcc_ex.h
+ stm32f7xx_hal_rcc_ex.h
+ 0
+ 0
+
+
+ 1
+ 22
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_tim.h
+ stm32f7xx_hal_tim.h
+ 0
+ 0
+
+
+ 1
+ 23
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_tim_ex.h
+ stm32f7xx_hal_tim_ex.h
+ 0
+ 0
+
+
+ 1
+ 24
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_uart.h
+ stm32f7xx_hal_uart.h
+ 0
+ 0
+
+
+ 1
+ 25
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_uart_ex.h
+ stm32f7xx_hal_uart_ex.h
+ 0
+ 0
+
+
+ 1
+ 26
+ 5
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h
+ stm32_hal_legacy.h
+ 0
+ 0
+
+
+ 1
+ 27
+ 1
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal.c
+ stm32f7xx_hal.c
+ 0
+ 0
+
+
+ 1
+ 28
+ 1
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_cortex.c
+ stm32f7xx_hal_cortex.c
+ 0
+ 0
+
+
+ 1
+ 29
+ 1
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_dma.c
+ stm32f7xx_hal_dma.c
+ 0
+ 0
+
+
+ 1
+ 30
+ 1
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_dma_ex.c
+ stm32f7xx_hal_dma_ex.c
+ 0
+ 0
+
+
+ 1
+ 31
+ 1
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_eth.c
+ stm32f7xx_hal_eth.c
+ 0
+ 0
+
+
+ 1
+ 32
+ 1
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_flash.c
+ stm32f7xx_hal_flash.c
+ 0
+ 0
+
+
+ 1
+ 33
+ 1
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_flash_ex.c
+ stm32f7xx_hal_flash_ex.c
+ 0
+ 0
+
+
+ 1
+ 34
+ 1
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_gpio.c
+ stm32f7xx_hal_gpio.c
+ 0
+ 0
+
+
+ 1
+ 35
+ 1
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_i2c.c
+ stm32f7xx_hal_i2c.c
+ 0
+ 0
+
+
+ 1
+ 36
+ 1
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_i2c_ex.c
+ stm32f7xx_hal_i2c_ex.c
+ 0
+ 0
+
+
+ 1
+ 37
+ 1
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_pwr.c
+ stm32f7xx_hal_pwr.c
+ 0
+ 0
+
+
+ 1
+ 38
+ 1
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_pwr_ex.c
+ stm32f7xx_hal_pwr_ex.c
+ 0
+ 0
+
+
+ 1
+ 39
+ 1
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_rcc.c
+ stm32f7xx_hal_rcc.c
+ 0
+ 0
+
+
+ 1
+ 40
+ 1
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_rcc_ex.c
+ stm32f7xx_hal_rcc_ex.c
+ 0
+ 0
+
+
+ 1
+ 41
+ 1
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_tim.c
+ stm32f7xx_hal_tim.c
+ 0
+ 0
+
+
+ 1
+ 42
+ 1
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_tim_ex.c
+ stm32f7xx_hal_tim_ex.c
+ 0
+ 0
+
+
+ 1
+ 43
+ 1
+ 0
+ 0
+ 0
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_uart.c
+ stm32f7xx_hal_uart.c
+ 0
+ 0
+
+
+ 1
+ 44
+ 1
+ 0
+ 0
+ 0
+ ..\lib\uip\clock-arch.c
+ clock-arch.c
+ 0
+ 0
+
+
+ 1
+ 45
+ 5
+ 0
+ 0
+ 0
+ ..\lib\uip\clock-arch.h
+ clock-arch.h
+ 0
+ 0
+
+
+ 1
+ 46
+ 1
+ 0
+ 0
+ 0
+ ..\lib\uip\netdev.c
+ netdev.c
+ 0
+ 0
+
+
+ 1
+ 47
+ 5
+ 0
+ 0
+ 0
+ ..\lib\uip\netdev.h
+ netdev.h
+ 0
+ 0
+
+
+ 1
+ 48
+ 5
+ 0
+ 0
+ 0
+ ..\lib\uip\uip-conf.h
+ uip-conf.h
+ 0
+ 0
+
+
+ 1
+ 49
+ 5
+ 0
+ 0
+ 0
+ ..\lib\stm32f7xx_hal_conf.h
+ stm32f7xx_hal_conf.h
+ 0
+ 0
+
+
+ 1
+ 50
+ 1
+ 0
+ 0
+ 0
+ ..\lib\system_stm32f7xx.c
+ system_stm32f7xx.c
+ 0
+ 0
+
+
+
+
+ App
+ 1
+ 0
+ 0
+ 0
+
+ 2
+ 51
+ 1
+ 0
+ 0
+ 0
+ ..\boot.c
+ boot.c
+ 0
+ 0
+
+
+ 2
+ 52
+ 5
+ 0
+ 0
+ 0
+ ..\boot.h
+ boot.h
+ 0
+ 0
+
+
+ 2
+ 53
+ 5
+ 0
+ 0
+ 0
+ ..\header.h
+ header.h
+ 0
+ 0
+
+
+ 2
+ 54
+ 1
+ 0
+ 0
+ 0
+ ..\led.c
+ led.c
+ 0
+ 0
+
+
+ 2
+ 55
+ 5
+ 0
+ 0
+ 0
+ ..\led.h
+ led.h
+ 0
+ 0
+
+
+ 2
+ 56
+ 1
+ 0
+ 0
+ 0
+ ..\main.c
+ main.c
+ 0
+ 0
+
+
+ 2
+ 57
+ 1
+ 0
+ 0
+ 0
+ ..\net.c
+ net.c
+ 0
+ 0
+
+
+ 2
+ 58
+ 5
+ 0
+ 0
+ 0
+ ..\net.h
+ net.h
+ 0
+ 0
+
+
+ 2
+ 59
+ 1
+ 0
+ 0
+ 0
+ ..\shared_params.c
+ shared_params.c
+ 0
+ 0
+
+
+ 2
+ 60
+ 5
+ 0
+ 0
+ 0
+ ..\shared_params.h
+ shared_params.h
+ 0
+ 0
+
+
+ 2
+ 61
+ 2
+ 0
+ 0
+ 0
+ ..\startup_stm32f767xx.s
+ startup_stm32f767xx.s
+ 0
+ 0
+
+
+ 2
+ 62
+ 1
+ 0
+ 0
+ 0
+ ..\timer.c
+ timer.c
+ 0
+ 0
+
+
+ 2
+ 63
+ 5
+ 0
+ 0
+ 0
+ ..\timer.h
+ timer.h
+ 0
+ 0
+
+
+
+
+ uIP
+ 0
+ 0
+ 0
+ 0
+
+ 3
+ 64
+ 1
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\apps\dhcpc\dhcpc.c
+ dhcpc.c
+ 0
+ 0
+
+
+ 3
+ 65
+ 5
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\apps\dhcpc\dhcpc.h
+ dhcpc.h
+ 0
+ 0
+
+
+ 3
+ 66
+ 5
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\uip\clock.h
+ clock.h
+ 0
+ 0
+
+
+ 3
+ 67
+ 5
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\uip\lc.h
+ lc.h
+ 0
+ 0
+
+
+ 3
+ 68
+ 5
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\uip\lc-addrlabels.h
+ lc-addrlabels.h
+ 0
+ 0
+
+
+ 3
+ 69
+ 5
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\uip\lc-switch.h
+ lc-switch.h
+ 0
+ 0
+
+
+ 3
+ 70
+ 5
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\uip\pt.h
+ pt.h
+ 0
+ 0
+
+
+ 3
+ 71
+ 1
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\uip\uip.c
+ uip.c
+ 0
+ 0
+
+
+ 3
+ 72
+ 5
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\uip\uip.h
+ uip.h
+ 0
+ 0
+
+
+ 3
+ 73
+ 5
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\uip\uip_arch.h
+ uip_arch.h
+ 0
+ 0
+
+
+ 3
+ 74
+ 1
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\uip\uip_arp.c
+ uip_arp.c
+ 0
+ 0
+
+
+ 3
+ 75
+ 5
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\uip\uip_arp.h
+ uip_arp.h
+ 0
+ 0
+
+
+ 3
+ 76
+ 1
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\uip\uip_timer.c
+ uip_timer.c
+ 0
+ 0
+
+
+ 3
+ 77
+ 5
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\uip\uip_timer.h
+ uip_timer.h
+ 0
+ 0
+
+
+ 3
+ 78
+ 5
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\uip\uip-fw.h
+ uip-fw.h
+ 0
+ 0
+
+
+ 3
+ 79
+ 1
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\uip\uiplib.c
+ uiplib.c
+ 0
+ 0
+
+
+ 3
+ 80
+ 5
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\uip\uiplib.h
+ uiplib.h
+ 0
+ 0
+
+
+ 3
+ 81
+ 5
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\uip\uip-neighbor.h
+ uip-neighbor.h
+ 0
+ 0
+
+
+ 3
+ 82
+ 5
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\uip\uipopt.h
+ uipopt.h
+ 0
+ 0
+
+
+ 3
+ 83
+ 5
+ 0
+ 0
+ 0
+ ..\..\..\..\Source\third_party\uip\uip\uip-split.h
+ uip-split.h
+ 0
+ 0
+
+
+
+
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/ide/stm32f767.uvprojx b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/ide/stm32f767.uvprojx
new file mode 100644
index 00000000..10c77288
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/ide/stm32f767.uvprojx
@@ -0,0 +1,822 @@
+
+
+
+ 2.1
+
+ ### uVision Project, (C) Keil Software
+
+
+
+ Target
+ 0x4
+ ARM-ADS
+ 5060750::V5.06 update 6 (build 750)::ARMCC
+ 0
+
+
+ STM32F767ZITx
+ STMicroelectronics
+ Keil.STM32F7xx_DFP.2.11.0
+ http://www.keil.com/pack
+ IRAM(0x20000000-0x2007FFFF) IROM(0x8000000-0x81FFFFF) CLOCK(12000000) FPU3(DFPU) CPUTYPE("Cortex-M7") ELITTLE
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ $$Device:STM32F767ZITx$CMSIS\SVD\STM32F7x7_v1r2.svd
+ 0
+ 0
+
+
+
+
+
+
+ 0
+ 0
+ 0
+ 0
+ 1
+
+ ..\bin\
+ demoprog_stm32f767
+ 1
+ 0
+ 0
+ 1
+ 0
+
+ 1
+ 0
+ 0
+
+ 0
+ 0
+
+
+ 0
+ 0
+ 0
+ 0
+
+
+ 0
+ 0
+
+
+ 0
+ 0
+ 0
+ 0
+
+
+ 1
+ 0
+ fromelf --m32 --output=..\bin\demoprog_stm32f767.srec ..\bin\demoprog_stm32f767.axf
+
+ 0
+ 0
+ 0
+ 0
+
+ 0
+
+
+
+ 0
+ 0
+ 0
+ 0
+ 0
+ 1
+ 0
+ 0
+ 0
+ 0
+ 3
+
+
+ 0
+
+
+ SARMCM3.DLL
+ -REMAP -MPU
+ DCM.DLL
+ -pCM7
+ SARMCM3.DLL
+ -MPU
+ TCM.DLL
+ -pCM7
+
+
+
+ 1
+ 0
+ 0
+ 0
+ 16
+
+
+
+
+ 1
+ 0
+ 0
+ 1
+ 1
+ 4100
+
+ 1
+ STLink\ST-LINKIII-KEIL_SWO.dll
+ "" ()
+
+
+
+
+ 0
+
+
+
+ 0
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 0
+ 1
+ 1
+ 0
+ 1
+ 1
+ 0
+ 0
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 0
+ 0
+ "Cortex-M7"
+
+ 0
+ 0
+ 0
+ 1
+ 1
+ 0
+ 0
+ 3
+ 0
+ 0
+ 0
+ 8
+ 0
+ 0
+ 0
+ 0
+ 3
+ 3
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 1
+ 0
+ 0
+ 0
+ 0
+ 1
+ 0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x20000000
+ 0x80000
+
+
+ 1
+ 0x8000000
+ 0x200000
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 1
+ 0x0
+ 0x0
+
+
+ 1
+ 0x0
+ 0x0
+
+
+ 1
+ 0x0
+ 0x0
+
+
+ 1
+ 0x8000000
+ 0x200000
+
+
+ 1
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x20000000
+ 0x80000
+
+
+ 0
+ 0x0
+ 0x0
+
+
+
+
+
+ 1
+ 2
+ 0
+ 0
+ 1
+ 0
+ 0
+ 0
+ 0
+ 0
+ 2
+ 0
+ 0
+ 1
+ 0
+ 0
+ 1
+ 1
+ 1
+ 1
+ 0
+ 0
+ 0
+
+ --diag_suppress=111
+ USE_HAL_DRIVER,STM32F767xx
+
+ ..\lib;..\lib\CMSIS\Device\ST\STM32F7xx\Include;..\lib\CMSIS\Include;..\lib\STM32F7xx_HAL_Driver\Inc;..\lib\STM32F7xx_HAL_Driver\Inc\Legacy;..\lib\uip;..\..\Prog;..\..\..\..\Source\third_party\uip\uip;..\..\..\..\Source\third_party\uip\apps\dhcpc
+
+
+
+ 1
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+
+
+
+
+
+
+
+
+ 0
+ 0
+ 0
+ 0
+ 1
+ 0
+ 0x08000000
+ 0x20000000
+
+ ..\stm32f767.sct
+
+
+
+
+
+
+
+
+
+
+ Lib
+
+
+ stm32f7xx.h
+ 5
+ ..\lib\CMSIS\Device\ST\STM32F7xx\Include\stm32f7xx.h
+
+
+ stm32f767xx.h
+ 5
+ ..\lib\CMSIS\Device\ST\STM32F7xx\Include\stm32f767xx.h
+
+
+ system_stm32f7xx.h
+ 5
+ ..\lib\CMSIS\Device\ST\STM32F7xx\Include\system_stm32f7xx.h
+
+
+ cmsis_armcc.h
+ 5
+ ..\lib\CMSIS\Include\cmsis_armcc.h
+
+
+ core_cm7.h
+ 5
+ ..\lib\CMSIS\Include\core_cm7.h
+
+
+ stm32f7xx_hal.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal.h
+
+
+ stm32f7xx_hal_cortex.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_cortex.h
+
+
+ stm32f7xx_hal_def.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_def.h
+
+
+ stm32f7xx_hal_dma.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_dma.h
+
+
+ stm32f7xx_hal_dma_ex.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_dma_ex.h
+
+
+ stm32f7xx_hal_eth.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_eth.h
+
+
+ stm32f7xx_hal_flash.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_flash.h
+
+
+ stm32f7xx_hal_flash_ex.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_flash_ex.h
+
+
+ stm32f7xx_hal_gpio.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_gpio.h
+
+
+ stm32f7xx_hal_gpio_ex.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_gpio_ex.h
+
+
+ stm32f7xx_hal_i2c.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_i2c.h
+
+
+ stm32f7xx_hal_i2c_ex.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_i2c_ex.h
+
+
+ stm32f7xx_hal_pwr.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_pwr.h
+
+
+ stm32f7xx_hal_pwr_ex.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_pwr_ex.h
+
+
+ stm32f7xx_hal_rcc.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_rcc.h
+
+
+ stm32f7xx_hal_rcc_ex.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_rcc_ex.h
+
+
+ stm32f7xx_hal_tim.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_tim.h
+
+
+ stm32f7xx_hal_tim_ex.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_tim_ex.h
+
+
+ stm32f7xx_hal_uart.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_uart.h
+
+
+ stm32f7xx_hal_uart_ex.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\stm32f7xx_hal_uart_ex.h
+
+
+ stm32_hal_legacy.h
+ 5
+ ..\lib\STM32F7xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h
+
+
+ stm32f7xx_hal.c
+ 1
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal.c
+
+
+ stm32f7xx_hal_cortex.c
+ 1
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_cortex.c
+
+
+ stm32f7xx_hal_dma.c
+ 1
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_dma.c
+
+
+ stm32f7xx_hal_dma_ex.c
+ 1
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_dma_ex.c
+
+
+ stm32f7xx_hal_eth.c
+ 1
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_eth.c
+
+
+ stm32f7xx_hal_flash.c
+ 1
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_flash.c
+
+
+ stm32f7xx_hal_flash_ex.c
+ 1
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_flash_ex.c
+
+
+ stm32f7xx_hal_gpio.c
+ 1
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_gpio.c
+
+
+ stm32f7xx_hal_i2c.c
+ 1
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_i2c.c
+
+
+ stm32f7xx_hal_i2c_ex.c
+ 1
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_i2c_ex.c
+
+
+ stm32f7xx_hal_pwr.c
+ 1
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_pwr.c
+
+
+ stm32f7xx_hal_pwr_ex.c
+ 1
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_pwr_ex.c
+
+
+ stm32f7xx_hal_rcc.c
+ 1
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_rcc.c
+
+
+ stm32f7xx_hal_rcc_ex.c
+ 1
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_rcc_ex.c
+
+
+ stm32f7xx_hal_tim.c
+ 1
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_tim.c
+
+
+ stm32f7xx_hal_tim_ex.c
+ 1
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_tim_ex.c
+
+
+ stm32f7xx_hal_uart.c
+ 1
+ ..\lib\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_uart.c
+
+
+ clock-arch.c
+ 1
+ ..\lib\uip\clock-arch.c
+
+
+ clock-arch.h
+ 5
+ ..\lib\uip\clock-arch.h
+
+
+ netdev.c
+ 1
+ ..\lib\uip\netdev.c
+
+
+ netdev.h
+ 5
+ ..\lib\uip\netdev.h
+
+
+ uip-conf.h
+ 5
+ ..\lib\uip\uip-conf.h
+
+
+ stm32f7xx_hal_conf.h
+ 5
+ ..\lib\stm32f7xx_hal_conf.h
+
+
+ system_stm32f7xx.c
+ 1
+ ..\lib\system_stm32f7xx.c
+
+
+
+
+ App
+
+
+ boot.c
+ 1
+ ..\boot.c
+
+
+ boot.h
+ 5
+ ..\boot.h
+
+
+ header.h
+ 5
+ ..\header.h
+
+
+ led.c
+ 1
+ ..\led.c
+
+
+ led.h
+ 5
+ ..\led.h
+
+
+ main.c
+ 1
+ ..\main.c
+
+
+ net.c
+ 1
+ ..\net.c
+
+
+ net.h
+ 5
+ ..\net.h
+
+
+ shared_params.c
+ 1
+ ..\shared_params.c
+
+
+ shared_params.h
+ 5
+ ..\shared_params.h
+
+
+ startup_stm32f767xx.s
+ 2
+ ..\startup_stm32f767xx.s
+
+
+ timer.c
+ 1
+ ..\timer.c
+
+
+ timer.h
+ 5
+ ..\timer.h
+
+
+
+
+ uIP
+
+
+ dhcpc.c
+ 1
+ ..\..\..\..\Source\third_party\uip\apps\dhcpc\dhcpc.c
+
+
+ dhcpc.h
+ 5
+ ..\..\..\..\Source\third_party\uip\apps\dhcpc\dhcpc.h
+
+
+ clock.h
+ 5
+ ..\..\..\..\Source\third_party\uip\uip\clock.h
+
+
+ lc.h
+ 5
+ ..\..\..\..\Source\third_party\uip\uip\lc.h
+
+
+ lc-addrlabels.h
+ 5
+ ..\..\..\..\Source\third_party\uip\uip\lc-addrlabels.h
+
+
+ lc-switch.h
+ 5
+ ..\..\..\..\Source\third_party\uip\uip\lc-switch.h
+
+
+ pt.h
+ 5
+ ..\..\..\..\Source\third_party\uip\uip\pt.h
+
+
+ uip.c
+ 1
+ ..\..\..\..\Source\third_party\uip\uip\uip.c
+
+
+ uip.h
+ 5
+ ..\..\..\..\Source\third_party\uip\uip\uip.h
+
+
+ uip_arch.h
+ 5
+ ..\..\..\..\Source\third_party\uip\uip\uip_arch.h
+
+
+ uip_arp.c
+ 1
+ ..\..\..\..\Source\third_party\uip\uip\uip_arp.c
+
+
+ uip_arp.h
+ 5
+ ..\..\..\..\Source\third_party\uip\uip\uip_arp.h
+
+
+ uip_timer.c
+ 1
+ ..\..\..\..\Source\third_party\uip\uip\uip_timer.c
+
+
+ uip_timer.h
+ 5
+ ..\..\..\..\Source\third_party\uip\uip\uip_timer.h
+
+
+ uip-fw.h
+ 5
+ ..\..\..\..\Source\third_party\uip\uip\uip-fw.h
+
+
+ uiplib.c
+ 1
+ ..\..\..\..\Source\third_party\uip\uip\uiplib.c
+
+
+ uiplib.h
+ 5
+ ..\..\..\..\Source\third_party\uip\uip\uiplib.h
+
+
+ uip-neighbor.h
+ 5
+ ..\..\..\..\Source\third_party\uip\uip\uip-neighbor.h
+
+
+ uipopt.h
+ 5
+ ..\..\..\..\Source\third_party\uip\uip\uipopt.h
+
+
+ uip-split.h
+ 5
+ ..\..\..\..\Source\third_party\uip\uip\uip-split.h
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/led.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/led.c
new file mode 100644
index 00000000..e4af882a
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/led.c
@@ -0,0 +1,94 @@
+/************************************************************************************//**
+* \file Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/led.c
+* \brief LED driver source file.
+* \ingroup Prog_ARMCM7_STM32F7_Nucleo_F767ZI_Keil
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2019 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+
+/****************************************************************************************
+* Include files
+****************************************************************************************/
+#include "header.h" /* generic header */
+
+
+/****************************************************************************************
+* Macro definitions
+****************************************************************************************/
+/** \brief Toggle interval time in milliseconds. */
+#define LED_TOGGLE_MS (500)
+
+
+/************************************************************************************//**
+** \brief Initializes the LED.
+** \return none.
+**
+****************************************************************************************/
+void LedInit(void)
+{
+ /* Note that the initialization of the LED GPIO pin is done in HAL_MspInit(). All that
+ * is left to do here is to make sure the LED is turned off after initialization.
+ */
+ HAL_GPIO_WritePin(GPIOB, GPIO_PIN_7, GPIO_PIN_RESET);
+} /*** end of LedInit ***/
+
+
+/************************************************************************************//**
+** \brief Toggles the LED at a fixed time interval.
+** \return none.
+**
+****************************************************************************************/
+void LedToggle(void)
+{
+ static unsigned char led_toggle_state = 0;
+ static unsigned long timer_counter_last = 0;
+ unsigned long timer_counter_now;
+
+ /* check if toggle interval time passed */
+ timer_counter_now = TimerGet();
+ if ( (timer_counter_now - timer_counter_last) < LED_TOGGLE_MS)
+ {
+ /* not yet time to toggle */
+ return;
+ }
+
+ /* determine toggle action */
+ if (led_toggle_state == 0)
+ {
+ led_toggle_state = 1;
+ /* turn the LED on */
+ HAL_GPIO_WritePin(GPIOB, GPIO_PIN_7, GPIO_PIN_SET);
+ }
+ else
+ {
+ led_toggle_state = 0;
+ /* turn the LED off */
+ HAL_GPIO_WritePin(GPIOB, GPIO_PIN_7, GPIO_PIN_RESET);
+ }
+
+ /* store toggle time to determine next toggle interval */
+ timer_counter_last = timer_counter_now;
+} /*** end of LedToggle ***/
+
+
+/*********************************** end of led.c **************************************/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/led.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/led.h
new file mode 100644
index 00000000..f2f5db74
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/led.h
@@ -0,0 +1,39 @@
+/************************************************************************************//**
+* \file Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/led.h
+* \brief LED driver header file.
+* \ingroup Prog_ARMCM7_STM32F7_Nucleo_F767ZI_Keil
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2019 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+#ifndef LED_H
+#define LED_H
+
+/****************************************************************************************
+* Function prototypes
+****************************************************************************************/
+void LedInit(void);
+void LedToggle(void);
+
+
+#endif /* LED_H */
+/*********************************** end of led.h **************************************/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Device/ST/STM32F7xx/Include/stm32f767xx.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Device/ST/STM32F7xx/Include/stm32f767xx.h
new file mode 100644
index 00000000..4e7911cf
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Device/ST/STM32F7xx/Include/stm32f767xx.h
@@ -0,0 +1,18597 @@
+/**
+ ******************************************************************************
+ * @file stm32f767xx.h
+ * @author MCD Application Team
+ * @brief CMSIS Cortex-M7 Device Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f767xx
+ * @{
+ */
+
+#ifndef __STM32F767xx_H
+#define __STM32F767xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief STM32F7xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum
+{
+/****** Cortex-M7 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M7 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M7 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M7 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M7 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M7 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M7 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M7 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */
+ DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */
+ DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */
+ DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */
+ DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */
+ DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */
+ DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */
+ ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */
+ CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */
+ CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */
+ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
+ CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */
+ TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */
+ TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */
+ OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */
+ TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */
+ TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */
+ TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */
+ TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */
+ DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */
+ FMC_IRQn = 48, /*!< FMC global Interrupt */
+ SDMMC1_IRQn = 49, /*!< SDMMC1 global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 52, /*!< UART4 global Interrupt */
+ UART5_IRQn = 53, /*!< UART5 global Interrupt */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */
+ TIM7_IRQn = 55, /*!< TIM7 global interrupt */
+ DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */
+ DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */
+ DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */
+ DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */
+ DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */
+ ETH_IRQn = 61, /*!< Ethernet global Interrupt */
+ ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */
+ CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */
+ CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */
+ CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */
+ CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */
+ OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */
+ DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */
+ DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */
+ DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */
+ USART6_IRQn = 71, /*!< USART6 global interrupt */
+ I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */
+ I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */
+ OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */
+ OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */
+ OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */
+ OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */
+ DCMI_IRQn = 78, /*!< DCMI global interrupt */
+ RNG_IRQn = 80, /*!< RNG global interrupt */
+ FPU_IRQn = 81, /*!< FPU global interrupt */
+ UART7_IRQn = 82, /*!< UART7 global interrupt */
+ UART8_IRQn = 83, /*!< UART8 global interrupt */
+ SPI4_IRQn = 84, /*!< SPI4 global Interrupt */
+ SPI5_IRQn = 85, /*!< SPI5 global Interrupt */
+ SPI6_IRQn = 86, /*!< SPI6 global Interrupt */
+ SAI1_IRQn = 87, /*!< SAI1 global Interrupt */
+ LTDC_IRQn = 88, /*!< LTDC global Interrupt */
+ LTDC_ER_IRQn = 89, /*!< LTDC Error global Interrupt */
+ DMA2D_IRQn = 90, /*!< DMA2D global Interrupt */
+ SAI2_IRQn = 91, /*!< SAI2 global Interrupt */
+ QUADSPI_IRQn = 92, /*!< Quad SPI global interrupt */
+ LPTIM1_IRQn = 93, /*!< LP TIM1 interrupt */
+ CEC_IRQn = 94, /*!< HDMI-CEC global Interrupt */
+ I2C4_EV_IRQn = 95, /*!< I2C4 Event Interrupt */
+ I2C4_ER_IRQn = 96, /*!< I2C4 Error Interrupt */
+ SPDIF_RX_IRQn = 97, /*!< SPDIF-RX global Interrupt */
+ DFSDM1_FLT0_IRQn = 99, /*!< DFSDM1 Filter 0 global Interrupt */
+ DFSDM1_FLT1_IRQn = 100, /*!< DFSDM1 Filter 1 global Interrupt */
+ DFSDM1_FLT2_IRQn = 101, /*!< DFSDM1 Filter 2 global Interrupt */
+ DFSDM1_FLT3_IRQn = 102, /*!< DFSDM1 Filter 3 global Interrupt */
+ SDMMC2_IRQn = 103, /*!< SDMMC2 global Interrupt */
+ CAN3_TX_IRQn = 104, /*!< CAN3 TX Interrupt */
+ CAN3_RX0_IRQn = 105, /*!< CAN3 RX0 Interrupt */
+ CAN3_RX1_IRQn = 106, /*!< CAN3 RX1 Interrupt */
+ CAN3_SCE_IRQn = 107, /*!< CAN3 SCE Interrupt */
+ JPEG_IRQn = 108, /*!< JPEG global Interrupt */
+ MDIOS_IRQn = 109 /*!< MDIO Slave global Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+/**
+ * @brief Configuration of the Cortex-M7 Processor and Core Peripherals
+ */
+#define __CM7_REV 0x0100U /*!< Cortex-M7 revision r1p0 */
+#define __MPU_PRESENT 1 /*!< CM7 provides an MPU */
+#define __NVIC_PRIO_BITS 4 /*!< CM7 uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+#define __FPU_PRESENT 1 /*!< FPU present */
+#define __ICACHE_PRESENT 1 /*!< CM7 instruction cache present */
+#define __DCACHE_PRESENT 1 /*!< CM7 data cache present */
+#include "core_cm7.h" /*!< Cortex-M7 processor and core peripherals */
+
+
+#include "system_stm32f7xx.h"
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
+ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
+ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */
+ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+} CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+} CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+} CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+} CAN_TypeDef;
+
+/**
+ * @brief HDMI-CEC
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */
+ __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */
+ __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */
+ __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */
+ __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */
+ __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */
+}CEC_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief DFSDM module registers
+ */
+typedef struct
+{
+ __IO uint32_t FLTCR1; /*!< DFSDM control register1, Address offset: 0x100 */
+ __IO uint32_t FLTCR2; /*!< DFSDM control register2, Address offset: 0x104 */
+ __IO uint32_t FLTISR; /*!< DFSDM interrupt and status register, Address offset: 0x108 */
+ __IO uint32_t FLTICR; /*!< DFSDM interrupt flag clear register, Address offset: 0x10C */
+ __IO uint32_t FLTJCHGR; /*!< DFSDM injected channel group selection register, Address offset: 0x110 */
+ __IO uint32_t FLTFCR; /*!< DFSDM filter control register, Address offset: 0x114 */
+ __IO uint32_t FLTJDATAR; /*!< DFSDM data register for injected group, Address offset: 0x118 */
+ __IO uint32_t FLTRDATAR; /*!< DFSDM data register for regular group, Address offset: 0x11C */
+ __IO uint32_t FLTAWHTR; /*!< DFSDM analog watchdog high threshold register, Address offset: 0x120 */
+ __IO uint32_t FLTAWLTR; /*!< DFSDM analog watchdog low threshold register, Address offset: 0x124 */
+ __IO uint32_t FLTAWSR; /*!< DFSDM analog watchdog status register Address offset: 0x128 */
+ __IO uint32_t FLTAWCFR; /*!< DFSDM analog watchdog clear flag register Address offset: 0x12C */
+ __IO uint32_t FLTEXMAX; /*!< DFSDM extreme detector maximum register, Address offset: 0x130 */
+ __IO uint32_t FLTEXMIN; /*!< DFSDM extreme detector minimum register Address offset: 0x134 */
+ __IO uint32_t FLTCNVTIMR; /*!< DFSDM conversion timer, Address offset: 0x138 */
+} DFSDM_Filter_TypeDef;
+
+/**
+ * @brief DFSDM channel configuration registers
+ */
+typedef struct
+{
+ __IO uint32_t CHCFGR1; /*!< DFSDM channel configuration register1, Address offset: 0x00 */
+ __IO uint32_t CHCFGR2; /*!< DFSDM channel configuration register2, Address offset: 0x04 */
+ __IO uint32_t CHAWSCDR; /*!< DFSDM channel analog watchdog and
+ short circuit detector register, Address offset: 0x08 */
+ __IO uint32_t CHWDATAR; /*!< DFSDM channel watchdog filter data register, Address offset: 0x0C */
+ __IO uint32_t CHDATINR; /*!< DFSDM channel data input register, Address offset: 0x10 */
+} DFSDM_Channel_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DCMI
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DCMI control register 1, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */
+ __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */
+ __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */
+ __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */
+ __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */
+ __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */
+ __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */
+ __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */
+ __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */
+} DCMI_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DMA stream x configuration register */
+ __IO uint32_t NDTR; /*!< DMA stream x number of data register */
+ __IO uint32_t PAR; /*!< DMA stream x peripheral address register */
+ __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */
+ __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */
+ __IO uint32_t FCR; /*!< DMA stream x FIFO control register */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */
+ __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */
+ __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */
+ __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+/**
+ * @brief DMA2D Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DMA2D Control Register, Address offset: 0x00 */
+ __IO uint32_t ISR; /*!< DMA2D Interrupt Status Register, Address offset: 0x04 */
+ __IO uint32_t IFCR; /*!< DMA2D Interrupt Flag Clear Register, Address offset: 0x08 */
+ __IO uint32_t FGMAR; /*!< DMA2D Foreground Memory Address Register, Address offset: 0x0C */
+ __IO uint32_t FGOR; /*!< DMA2D Foreground Offset Register, Address offset: 0x10 */
+ __IO uint32_t BGMAR; /*!< DMA2D Background Memory Address Register, Address offset: 0x14 */
+ __IO uint32_t BGOR; /*!< DMA2D Background Offset Register, Address offset: 0x18 */
+ __IO uint32_t FGPFCCR; /*!< DMA2D Foreground PFC Control Register, Address offset: 0x1C */
+ __IO uint32_t FGCOLR; /*!< DMA2D Foreground Color Register, Address offset: 0x20 */
+ __IO uint32_t BGPFCCR; /*!< DMA2D Background PFC Control Register, Address offset: 0x24 */
+ __IO uint32_t BGCOLR; /*!< DMA2D Background Color Register, Address offset: 0x28 */
+ __IO uint32_t FGCMAR; /*!< DMA2D Foreground CLUT Memory Address Register, Address offset: 0x2C */
+ __IO uint32_t BGCMAR; /*!< DMA2D Background CLUT Memory Address Register, Address offset: 0x30 */
+ __IO uint32_t OPFCCR; /*!< DMA2D Output PFC Control Register, Address offset: 0x34 */
+ __IO uint32_t OCOLR; /*!< DMA2D Output Color Register, Address offset: 0x38 */
+ __IO uint32_t OMAR; /*!< DMA2D Output Memory Address Register, Address offset: 0x3C */
+ __IO uint32_t OOR; /*!< DMA2D Output Offset Register, Address offset: 0x40 */
+ __IO uint32_t NLR; /*!< DMA2D Number of Line Register, Address offset: 0x44 */
+ __IO uint32_t LWR; /*!< DMA2D Line Watermark Register, Address offset: 0x48 */
+ __IO uint32_t AMTCR; /*!< DMA2D AHB Master Timer Configuration Register, Address offset: 0x4C */
+ uint32_t RESERVED[236]; /*!< Reserved, 0x50-0x3FF */
+ __IO uint32_t FGCLUT[256]; /*!< DMA2D Foreground CLUT, Address offset:400-7FF */
+ __IO uint32_t BGCLUT[256]; /*!< DMA2D Background CLUT, Address offset:800-BFF */
+} DMA2D_TypeDef;
+
+
+/**
+ * @brief Ethernet MAC
+ */
+
+typedef struct
+{
+ __IO uint32_t MACCR;
+ __IO uint32_t MACFFR;
+ __IO uint32_t MACHTHR;
+ __IO uint32_t MACHTLR;
+ __IO uint32_t MACMIIAR;
+ __IO uint32_t MACMIIDR;
+ __IO uint32_t MACFCR;
+ __IO uint32_t MACVLANTR; /* 8 */
+ uint32_t RESERVED0[2];
+ __IO uint32_t MACRWUFFR; /* 11 */
+ __IO uint32_t MACPMTCSR;
+ uint32_t RESERVED1;
+ __IO uint32_t MACDBGR;
+ __IO uint32_t MACSR; /* 15 */
+ __IO uint32_t MACIMR;
+ __IO uint32_t MACA0HR;
+ __IO uint32_t MACA0LR;
+ __IO uint32_t MACA1HR;
+ __IO uint32_t MACA1LR;
+ __IO uint32_t MACA2HR;
+ __IO uint32_t MACA2LR;
+ __IO uint32_t MACA3HR;
+ __IO uint32_t MACA3LR; /* 24 */
+ uint32_t RESERVED2[40];
+ __IO uint32_t MMCCR; /* 65 */
+ __IO uint32_t MMCRIR;
+ __IO uint32_t MMCTIR;
+ __IO uint32_t MMCRIMR;
+ __IO uint32_t MMCTIMR; /* 69 */
+ uint32_t RESERVED3[14];
+ __IO uint32_t MMCTGFSCCR; /* 84 */
+ __IO uint32_t MMCTGFMSCCR;
+ uint32_t RESERVED4[5];
+ __IO uint32_t MMCTGFCR;
+ uint32_t RESERVED5[10];
+ __IO uint32_t MMCRFCECR;
+ __IO uint32_t MMCRFAECR;
+ uint32_t RESERVED6[10];
+ __IO uint32_t MMCRGUFCR;
+ uint32_t RESERVED7[334];
+ __IO uint32_t PTPTSCR;
+ __IO uint32_t PTPSSIR;
+ __IO uint32_t PTPTSHR;
+ __IO uint32_t PTPTSLR;
+ __IO uint32_t PTPTSHUR;
+ __IO uint32_t PTPTSLUR;
+ __IO uint32_t PTPTSAR;
+ __IO uint32_t PTPTTHR;
+ __IO uint32_t PTPTTLR;
+ __IO uint32_t RESERVED8;
+ __IO uint32_t PTPTSSR;
+ uint32_t RESERVED9[565];
+ __IO uint32_t DMABMR;
+ __IO uint32_t DMATPDR;
+ __IO uint32_t DMARPDR;
+ __IO uint32_t DMARDLAR;
+ __IO uint32_t DMATDLAR;
+ __IO uint32_t DMASR;
+ __IO uint32_t DMAOMR;
+ __IO uint32_t DMAIER;
+ __IO uint32_t DMAMFBOCR;
+ __IO uint32_t DMARSWTR;
+ uint32_t RESERVED10[8];
+ __IO uint32_t DMACHTDR;
+ __IO uint32_t DMACHRDR;
+ __IO uint32_t DMACHTBAR;
+ __IO uint32_t DMACHRBAR;
+} ETH_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */
+ __IO uint32_t OPTCR1; /*!< FLASH option control register 1 , Address offset: 0x18 */
+} FLASH_TypeDef;
+
+
+
+/**
+ * @brief Flexible Memory Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */
+} FMC_Bank1_TypeDef;
+
+/**
+ * @brief Flexible Memory Controller Bank1E
+ */
+
+typedef struct
+{
+ __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */
+} FMC_Bank1E_TypeDef;
+
+/**
+ * @brief Flexible Memory Controller Bank3
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR; /*!< NAND Flash control register, Address offset: 0x80 */
+ __IO uint32_t SR; /*!< NAND Flash FIFO status and interrupt register, Address offset: 0x84 */
+ __IO uint32_t PMEM; /*!< NAND Flash Common memory space timing register, Address offset: 0x88 */
+ __IO uint32_t PATT; /*!< NAND Flash Attribute memory space timing register, Address offset: 0x8C */
+ uint32_t RESERVED0; /*!< Reserved, 0x90 */
+ __IO uint32_t ECCR; /*!< NAND Flash ECC result registers, Address offset: 0x94 */
+} FMC_Bank3_TypeDef;
+
+/**
+ * @brief Flexible Memory Controller Bank5_6
+ */
+
+typedef struct
+{
+ __IO uint32_t SDCR[2]; /*!< SDRAM Control registers , Address offset: 0x140-0x144 */
+ __IO uint32_t SDTR[2]; /*!< SDRAM Timing registers , Address offset: 0x148-0x14C */
+ __IO uint32_t SDCMR; /*!< SDRAM Command Mode register, Address offset: 0x150 */
+ __IO uint32_t SDRTR; /*!< SDRAM Refresh Timer register, Address offset: 0x154 */
+ __IO uint32_t SDSR; /*!< SDRAM Status register, Address offset: 0x158 */
+} FMC_Bank5_6_TypeDef;
+
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
+} GPIO_TypeDef;
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+ uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t CBR; /*!< SYSCFG Class B register, Address offset: 0x1C */
+ __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+} I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+} IWDG_TypeDef;
+
+
+/**
+ * @brief LCD-TFT Display Controller
+ */
+
+typedef struct
+{
+ uint32_t RESERVED0[2]; /*!< Reserved, 0x00-0x04 */
+ __IO uint32_t SSCR; /*!< LTDC Synchronization Size Configuration Register, Address offset: 0x08 */
+ __IO uint32_t BPCR; /*!< LTDC Back Porch Configuration Register, Address offset: 0x0C */
+ __IO uint32_t AWCR; /*!< LTDC Active Width Configuration Register, Address offset: 0x10 */
+ __IO uint32_t TWCR; /*!< LTDC Total Width Configuration Register, Address offset: 0x14 */
+ __IO uint32_t GCR; /*!< LTDC Global Control Register, Address offset: 0x18 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x1C-0x20 */
+ __IO uint32_t SRCR; /*!< LTDC Shadow Reload Configuration Register, Address offset: 0x24 */
+ uint32_t RESERVED2[1]; /*!< Reserved, 0x28 */
+ __IO uint32_t BCCR; /*!< LTDC Background Color Configuration Register, Address offset: 0x2C */
+ uint32_t RESERVED3[1]; /*!< Reserved, 0x30 */
+ __IO uint32_t IER; /*!< LTDC Interrupt Enable Register, Address offset: 0x34 */
+ __IO uint32_t ISR; /*!< LTDC Interrupt Status Register, Address offset: 0x38 */
+ __IO uint32_t ICR; /*!< LTDC Interrupt Clear Register, Address offset: 0x3C */
+ __IO uint32_t LIPCR; /*!< LTDC Line Interrupt Position Configuration Register, Address offset: 0x40 */
+ __IO uint32_t CPSR; /*!< LTDC Current Position Status Register, Address offset: 0x44 */
+ __IO uint32_t CDSR; /*!< LTDC Current Display Status Register, Address offset: 0x48 */
+} LTDC_TypeDef;
+
+/**
+ * @brief LCD-TFT Display layer x Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< LTDC Layerx Control Register Address offset: 0x84 */
+ __IO uint32_t WHPCR; /*!< LTDC Layerx Window Horizontal Position Configuration Register Address offset: 0x88 */
+ __IO uint32_t WVPCR; /*!< LTDC Layerx Window Vertical Position Configuration Register Address offset: 0x8C */
+ __IO uint32_t CKCR; /*!< LTDC Layerx Color Keying Configuration Register Address offset: 0x90 */
+ __IO uint32_t PFCR; /*!< LTDC Layerx Pixel Format Configuration Register Address offset: 0x94 */
+ __IO uint32_t CACR; /*!< LTDC Layerx Constant Alpha Configuration Register Address offset: 0x98 */
+ __IO uint32_t DCCR; /*!< LTDC Layerx Default Color Configuration Register Address offset: 0x9C */
+ __IO uint32_t BFCR; /*!< LTDC Layerx Blending Factors Configuration Register Address offset: 0xA0 */
+ uint32_t RESERVED0[2]; /*!< Reserved */
+ __IO uint32_t CFBAR; /*!< LTDC Layerx Color Frame Buffer Address Register Address offset: 0xAC */
+ __IO uint32_t CFBLR; /*!< LTDC Layerx Color Frame Buffer Length Register Address offset: 0xB0 */
+ __IO uint32_t CFBLNR; /*!< LTDC Layerx ColorFrame Buffer Line Number Register Address offset: 0xB4 */
+ uint32_t RESERVED1[3]; /*!< Reserved */
+ __IO uint32_t CLUTWR; /*!< LTDC Layerx CLUT Write Register Address offset: 0x144 */
+
+} LTDC_Layer_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< PWR power control register 1, Address offset: 0x00 */
+ __IO uint32_t CSR1; /*!< PWR power control/status register 2, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< PWR power control register 2, Address offset: 0x08 */
+ __IO uint32_t CSR2; /*!< PWR power control/status register 2, Address offset: 0x0C */
+} PWR_TypeDef;
+
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */
+ __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */
+ __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */
+ uint32_t RESERVED0; /*!< Reserved, 0x1C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */
+ __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */
+ __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */
+ __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */
+ uint32_t RESERVED2; /*!< Reserved, 0x3C */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */
+ uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */
+ __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+ __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */
+ __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */
+ uint32_t RESERVED4; /*!< Reserved, 0x5C */
+ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+ uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */
+ uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */
+ __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */
+ __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */
+ __IO uint32_t PLLSAICFGR; /*!< RCC PLLSAI configuration register, Address offset: 0x88 */
+ __IO uint32_t DCKCFGR1; /*!< RCC Dedicated Clocks configuration register1, Address offset: 0x8C */
+ __IO uint32_t DCKCFGR2; /*!< RCC Dedicated Clocks configuration register 2, Address offset: 0x90 */
+
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ uint32_t reserved; /*!< Reserved */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+ __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */
+ __IO uint32_t OR; /*!< RTC option register, Address offset: 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+ __IO uint32_t BKP20R; /*!< RTC backup register 20, Address offset: 0xA0 */
+ __IO uint32_t BKP21R; /*!< RTC backup register 21, Address offset: 0xA4 */
+ __IO uint32_t BKP22R; /*!< RTC backup register 22, Address offset: 0xA8 */
+ __IO uint32_t BKP23R; /*!< RTC backup register 23, Address offset: 0xAC */
+ __IO uint32_t BKP24R; /*!< RTC backup register 24, Address offset: 0xB0 */
+ __IO uint32_t BKP25R; /*!< RTC backup register 25, Address offset: 0xB4 */
+ __IO uint32_t BKP26R; /*!< RTC backup register 26, Address offset: 0xB8 */
+ __IO uint32_t BKP27R; /*!< RTC backup register 27, Address offset: 0xBC */
+ __IO uint32_t BKP28R; /*!< RTC backup register 28, Address offset: 0xC0 */
+ __IO uint32_t BKP29R; /*!< RTC backup register 29, Address offset: 0xC4 */
+ __IO uint32_t BKP30R; /*!< RTC backup register 30, Address offset: 0xC8 */
+ __IO uint32_t BKP31R; /*!< RTC backup register 31, Address offset: 0xCC */
+} RTC_TypeDef;
+
+
+/**
+ * @brief Serial Audio Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */
+} SAI_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */
+ __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */
+ __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */
+ __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */
+ __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */
+ __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */
+ __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */
+} SAI_Block_TypeDef;
+
+/**
+ * @brief SPDIF-RX Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< Control register, Address offset: 0x00 */
+ __IO uint32_t IMR; /*!< Interrupt mask register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< Status register, Address offset: 0x08 */
+ __IO uint32_t IFCR; /*!< Interrupt Flag Clear register, Address offset: 0x0C */
+ __IO uint32_t DR; /*!< Data input register, Address offset: 0x10 */
+ __IO uint32_t CSR; /*!< Channel Status register, Address offset: 0x14 */
+ __IO uint32_t DIR; /*!< Debug Information register, Address offset: 0x18 */
+} SPDIFRX_TypeDef;
+
+/**
+ * @brief SD host Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t POWER; /*!< SDMMC power control register, Address offset: 0x00 */
+ __IO uint32_t CLKCR; /*!< SDMMClock control register, Address offset: 0x04 */
+ __IO uint32_t ARG; /*!< SDMMC argument register, Address offset: 0x08 */
+ __IO uint32_t CMD; /*!< SDMMC command register, Address offset: 0x0C */
+ __I uint32_t RESPCMD; /*!< SDMMC command response register, Address offset: 0x10 */
+ __I uint32_t RESP1; /*!< SDMMC response 1 register, Address offset: 0x14 */
+ __I uint32_t RESP2; /*!< SDMMC response 2 register, Address offset: 0x18 */
+ __I uint32_t RESP3; /*!< SDMMC response 3 register, Address offset: 0x1C */
+ __I uint32_t RESP4; /*!< SDMMC response 4 register, Address offset: 0x20 */
+ __IO uint32_t DTIMER; /*!< SDMMC data timer register, Address offset: 0x24 */
+ __IO uint32_t DLEN; /*!< SDMMC data length register, Address offset: 0x28 */
+ __IO uint32_t DCTRL; /*!< SDMMC data control register, Address offset: 0x2C */
+ __I uint32_t DCOUNT; /*!< SDMMC data counter register, Address offset: 0x30 */
+ __I uint32_t STA; /*!< SDMMC status register, Address offset: 0x34 */
+ __IO uint32_t ICR; /*!< SDMMC interrupt clear register, Address offset: 0x38 */
+ __IO uint32_t MASK; /*!< SDMMC mask register, Address offset: 0x3C */
+ uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */
+ __I uint32_t FIFOCNT; /*!< SDMMC FIFO counter register, Address offset: 0x48 */
+ uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */
+ __IO uint32_t FIFO; /*!< SDMMC data FIFO register, Address offset: 0x80 */
+} SDMMC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+} SPI_TypeDef;
+
+/**
+ * @brief QUAD Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< QUADSPI Control register, Address offset: 0x00 */
+ __IO uint32_t DCR; /*!< QUADSPI Device Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< QUADSPI Status register, Address offset: 0x08 */
+ __IO uint32_t FCR; /*!< QUADSPI Flag Clear register, Address offset: 0x0C */
+ __IO uint32_t DLR; /*!< QUADSPI Data Length register, Address offset: 0x10 */
+ __IO uint32_t CCR; /*!< QUADSPI Communication Configuration register, Address offset: 0x14 */
+ __IO uint32_t AR; /*!< QUADSPI Address register, Address offset: 0x18 */
+ __IO uint32_t ABR; /*!< QUADSPI Alternate Bytes register, Address offset: 0x1C */
+ __IO uint32_t DR; /*!< QUADSPI Data register, Address offset: 0x20 */
+ __IO uint32_t PSMKR; /*!< QUADSPI Polling Status Mask register, Address offset: 0x24 */
+ __IO uint32_t PSMAR; /*!< QUADSPI Polling Status Match register, Address offset: 0x28 */
+ __IO uint32_t PIR; /*!< QUADSPI Polling Interval register, Address offset: 0x2C */
+ __IO uint32_t LPTR; /*!< QUADSPI Low Power Timeout register, Address offset: 0x30 */
+} QUADSPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+ __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */
+ __IO uint32_t CCR5; /*!< TIM capture/compare mode register5, Address offset: 0x58 */
+ __IO uint32_t CCR6; /*!< TIM capture/compare mode register6, Address offset: 0x5C */
+ __IO uint32_t AF1; /*!< TIM Alternate function option register 1, Address offset: 0x60 */
+ __IO uint32_t AF2; /*!< TIM Alternate function option register 2, Address offset: 0x64 */
+
+} TIM_TypeDef;
+
+/**
+ * @brief LPTIMIMER
+ */
+typedef struct
+{
+ __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */
+ __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */
+ __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */
+ __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */
+ __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */
+ __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */
+ __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */
+} LPTIM_TypeDef;
+
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+} USART_TypeDef;
+
+
+/**
+ * @brief Window WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+
+/**
+ * @brief RNG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */
+ __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */
+} RNG_TypeDef;
+
+/**
+ * @}
+ */
+
+/**
+ * @brief USB_OTG_Core_Registers
+ */
+typedef struct
+{
+ __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register 000h */
+ __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register 004h */
+ __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register 008h */
+ __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register 00Ch */
+ __IO uint32_t GRSTCTL; /*!< Core Reset Register 010h */
+ __IO uint32_t GINTSTS; /*!< Core Interrupt Register 014h */
+ __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register 018h */
+ __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register 01Ch */
+ __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register 020h */
+ __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register 024h */
+ __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register 028h */
+ __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg 02Ch */
+ uint32_t Reserved30[2]; /*!< Reserved 030h */
+ __IO uint32_t GCCFG; /*!< General Purpose IO Register 038h */
+ __IO uint32_t CID; /*!< User ID Register 03Ch */
+ uint32_t Reserved5[3]; /*!< Reserved 040h-048h */
+ __IO uint32_t GHWCFG3; /*!< User HW config3 04Ch */
+ uint32_t Reserved6; /*!< Reserved 050h */
+ __IO uint32_t GLPMCFG; /*!< LPM Register 054h */
+ __IO uint32_t GPWRDN; /*!< Power Down Register 058h */
+ __IO uint32_t GDFIFOCFG; /*!< DFIFO Software Config Register 05Ch */
+ __IO uint32_t GADPCTL; /*!< ADP Timer, Control and Status Register 60Ch */
+ uint32_t Reserved43[39]; /*!< Reserved 058h-0FFh */
+ __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg 100h */
+ __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */
+} USB_OTG_GlobalTypeDef;
+
+
+/**
+ * @brief USB_OTG_device_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DCFG; /*!< dev Configuration Register 800h */
+ __IO uint32_t DCTL; /*!< dev Control Register 804h */
+ __IO uint32_t DSTS; /*!< dev Status Register (RO) 808h */
+ uint32_t Reserved0C; /*!< Reserved 80Ch */
+ __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask 810h */
+ __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask 814h */
+ __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg 818h */
+ __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask 81Ch */
+ uint32_t Reserved20; /*!< Reserved 820h */
+ uint32_t Reserved9; /*!< Reserved 824h */
+ __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register 828h */
+ __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register 82Ch */
+ __IO uint32_t DTHRCTL; /*!< dev threshold 830h */
+ __IO uint32_t DIEPEMPMSK; /*!< dev empty msk 834h */
+ __IO uint32_t DEACHINT; /*!< dedicated EP interrupt 838h */
+ __IO uint32_t DEACHMSK; /*!< dedicated EP msk 83Ch */
+ uint32_t Reserved40; /*!< dedicated EP mask 840h */
+ __IO uint32_t DINEP1MSK; /*!< dedicated EP mask 844h */
+ uint32_t Reserved44[15]; /*!< Reserved 844-87Ch */
+ __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk 884h */
+} USB_OTG_DeviceTypeDef;
+
+
+/**
+ * @brief USB_OTG_IN_Endpoint-Specific_Register
+ */
+typedef struct
+{
+ __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */
+ uint32_t Reserved04; /*!< Reserved 900h + (ep_num * 20h) + 04h */
+ __IO uint32_t DIEPINT; /*!< dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */
+ uint32_t Reserved0C; /*!< Reserved 900h + (ep_num * 20h) + 0Ch */
+ __IO uint32_t DIEPTSIZ; /*!< IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */
+ __IO uint32_t DIEPDMA; /*!< IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */
+ __IO uint32_t DTXFSTS; /*!< IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */
+ uint32_t Reserved18; /*!< Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */
+} USB_OTG_INEndpointTypeDef;
+
+
+/**
+ * @brief USB_OTG_OUT_Endpoint-Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h */
+ uint32_t Reserved04; /*!< Reserved B00h + (ep_num * 20h) + 04h */
+ __IO uint32_t DOEPINT; /*!< dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h */
+ uint32_t Reserved0C; /*!< Reserved B00h + (ep_num * 20h) + 0Ch */
+ __IO uint32_t DOEPTSIZ; /*!< dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h */
+ __IO uint32_t DOEPDMA; /*!< dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h */
+ uint32_t Reserved18[2]; /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch */
+} USB_OTG_OUTEndpointTypeDef;
+
+
+/**
+ * @brief USB_OTG_Host_Mode_Register_Structures
+ */
+typedef struct
+{
+ __IO uint32_t HCFG; /*!< Host Configuration Register 400h */
+ __IO uint32_t HFIR; /*!< Host Frame Interval Register 404h */
+ __IO uint32_t HFNUM; /*!< Host Frame Nbr/Frame Remaining 408h */
+ uint32_t Reserved40C; /*!< Reserved 40Ch */
+ __IO uint32_t HPTXSTS; /*!< Host Periodic Tx FIFO/ Queue Status 410h */
+ __IO uint32_t HAINT; /*!< Host All Channels Interrupt Register 414h */
+ __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask 418h */
+} USB_OTG_HostTypeDef;
+
+/**
+ * @brief USB_OTG_Host_Channel_Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t HCCHAR; /*!< Host Channel Characteristics Register 500h */
+ __IO uint32_t HCSPLT; /*!< Host Channel Split Control Register 504h */
+ __IO uint32_t HCINT; /*!< Host Channel Interrupt Register 508h */
+ __IO uint32_t HCINTMSK; /*!< Host Channel Interrupt Mask Register 50Ch */
+ __IO uint32_t HCTSIZ; /*!< Host Channel Transfer Size Register 510h */
+ __IO uint32_t HCDMA; /*!< Host Channel DMA Address Register 514h */
+ uint32_t Reserved[2]; /*!< Reserved */
+} USB_OTG_HostChannelTypeDef;
+/**
+ * @}
+ */
+
+/**
+ * @brief JPEG Codec
+ */
+typedef struct
+{
+ __IO uint32_t CONFR0; /*!< JPEG Codec Control Register (JPEG_CONFR0), Address offset: 00h */
+ __IO uint32_t CONFR1; /*!< JPEG Codec Control Register (JPEG_CONFR1), Address offset: 04h */
+ __IO uint32_t CONFR2; /*!< JPEG Codec Control Register (JPEG_CONFR2), Address offset: 08h */
+ __IO uint32_t CONFR3; /*!< JPEG Codec Control Register (JPEG_CONFR3), Address offset: 0Ch */
+ __IO uint32_t CONFR4; /*!< JPEG Codec Control Register (JPEG_CONFR4), Address offset: 10h */
+ __IO uint32_t CONFR5; /*!< JPEG Codec Control Register (JPEG_CONFR5), Address offset: 14h */
+ __IO uint32_t CONFR6; /*!< JPEG Codec Control Register (JPEG_CONFR6), Address offset: 18h */
+ __IO uint32_t CONFR7; /*!< JPEG Codec Control Register (JPEG_CONFR7), Address offset: 1Ch */
+ uint32_t Reserved20[4]; /* Reserved Address offset: 20h-2Ch */
+ __IO uint32_t CR; /*!< JPEG Control Register (JPEG_CR), Address offset: 30h */
+ __IO uint32_t SR; /*!< JPEG Status Register (JPEG_SR), Address offset: 34h */
+ __IO uint32_t CFR; /*!< JPEG Clear Flag Register (JPEG_CFR), Address offset: 38h */
+ uint32_t Reserved3c; /* Reserved Address offset: 3Ch */
+ __IO uint32_t DIR; /*!< JPEG Data Input Register (JPEG_DIR), Address offset: 40h */
+ __IO uint32_t DOR; /*!< JPEG Data Output Register (JPEG_DOR), Address offset: 44h */
+ uint32_t Reserved48[2]; /* Reserved Address offset: 48h-4Ch */
+ __IO uint32_t QMEM0[16]; /*!< JPEG quantization tables 0, Address offset: 50h-8Ch */
+ __IO uint32_t QMEM1[16]; /*!< JPEG quantization tables 1, Address offset: 90h-CCh */
+ __IO uint32_t QMEM2[16]; /*!< JPEG quantization tables 2, Address offset: D0h-10Ch */
+ __IO uint32_t QMEM3[16]; /*!< JPEG quantization tables 3, Address offset: 110h-14Ch */
+ __IO uint32_t HUFFMIN[16]; /*!< JPEG HuffMin tables, Address offset: 150h-18Ch */
+ __IO uint32_t HUFFBASE[32]; /*!< JPEG HuffSymb tables, Address offset: 190h-20Ch */
+ __IO uint32_t HUFFSYMB[84]; /*!< JPEG HUFFSYMB tables, Address offset: 210h-35Ch */
+ __IO uint32_t DHTMEM[103]; /*!< JPEG DHTMem tables, Address offset: 360h-4F8h */
+ uint32_t Reserved4FC; /* Reserved Address offset: 4FCh */
+ __IO uint32_t HUFFENC_AC0[88]; /*!< JPEG encoder, AC Huffman table 0, Address offset: 500h-65Ch */
+ __IO uint32_t HUFFENC_AC1[88]; /*!< JPEG encoder, AC Huffman table 1, Address offset: 660h-7BCh */
+ __IO uint32_t HUFFENC_DC0[8]; /*!< JPEG encoder, DC Huffman table 0, Address offset: 7C0h-7DCh */
+ __IO uint32_t HUFFENC_DC1[8]; /*!< JPEG encoder, DC Huffman table 1, Address offset: 7E0h-7FCh */
+
+} JPEG_TypeDef;
+
+/**
+ * @brief MDIOS
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 00h */
+ __IO uint32_t WRFR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 04h */
+ __IO uint32_t CWRFR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 08h */
+ __IO uint32_t RDFR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 0Ch */
+ __IO uint32_t CRDFR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 10h */
+ __IO uint32_t SR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 14h */
+ __IO uint32_t CLRFR; /*!< MDIOS Configuration Register (MDIOS_CR), Address offset: 18h */
+ uint32_t RESERVED0[57]; /* Reserved Address offset: 1Ch */
+ __IO uint32_t DINR0; /*!< MDIOS Input Data Register (MDIOS_DINR0), Address offset: 100h */
+ __IO uint32_t DINR1; /*!< MDIOS Input Data Register (MDIOS_DINR1), Address offset: 104h */
+ __IO uint32_t DINR2; /*!< MDIOS Input Data Register (MDIOS_DINR2), Address offset: 108h */
+ __IO uint32_t DINR3; /*!< MDIOS Input Data Register (MDIOS_DINR3), Address offset: 10Ch */
+ __IO uint32_t DINR4; /*!< MDIOS Input Data Register (MDIOS_DINR4), Address offset: 110h */
+ __IO uint32_t DINR5; /*!< MDIOS Input Data Register (MDIOS_DINR5), Address offset: 114h */
+ __IO uint32_t DINR6; /*!< MDIOS Input Data Register (MDIOS_DINR6), Address offset: 118h */
+ __IO uint32_t DINR7; /*!< MDIOS Input Data Register (MDIOS_DINR7), Address offset: 11Ch */
+ __IO uint32_t DINR8; /*!< MDIOS Input Data Register (MDIOS_DINR8), Address offset: 120h */
+ __IO uint32_t DINR9; /*!< MDIOS Input Data Register (MDIOS_DINR9), Address offset: 124h */
+ __IO uint32_t DINR10; /*!< MDIOS Input Data Register (MDIOS_DINR10), Address offset: 128h */
+ __IO uint32_t DINR11; /*!< MDIOS Input Data Register (MDIOS_DINR11), Address offset: 12Ch */
+ __IO uint32_t DINR12; /*!< MDIOS Input Data Register (MDIOS_DINR12), Address offset: 130h */
+ __IO uint32_t DINR13; /*!< MDIOS Input Data Register (MDIOS_DINR13), Address offset: 134h */
+ __IO uint32_t DINR14; /*!< MDIOS Input Data Register (MDIOS_DINR14), Address offset: 138h */
+ __IO uint32_t DINR15; /*!< MDIOS Input Data Register (MDIOS_DINR15), Address offset: 13Ch */
+ __IO uint32_t DINR16; /*!< MDIOS Input Data Register (MDIOS_DINR16), Address offset: 140h */
+ __IO uint32_t DINR17; /*!< MDIOS Input Data Register (MDIOS_DINR17), Address offset: 144h */
+ __IO uint32_t DINR18; /*!< MDIOS Input Data Register (MDIOS_DINR18), Address offset: 148h */
+ __IO uint32_t DINR19; /*!< MDIOS Input Data Register (MDIOS_DINR19), Address offset: 14Ch */
+ __IO uint32_t DINR20; /*!< MDIOS Input Data Register (MDIOS_DINR20), Address offset: 150h */
+ __IO uint32_t DINR21; /*!< MDIOS Input Data Register (MDIOS_DINR21), Address offset: 154h */
+ __IO uint32_t DINR22; /*!< MDIOS Input Data Register (MDIOS_DINR22), Address offset: 158h */
+ __IO uint32_t DINR23; /*!< MDIOS Input Data Register (MDIOS_DINR23), Address offset: 15Ch */
+ __IO uint32_t DINR24; /*!< MDIOS Input Data Register (MDIOS_DINR24), Address offset: 160h */
+ __IO uint32_t DINR25; /*!< MDIOS Input Data Register (MDIOS_DINR25), Address offset: 164h */
+ __IO uint32_t DINR26; /*!< MDIOS Input Data Register (MDIOS_DINR26), Address offset: 168h */
+ __IO uint32_t DINR27; /*!< MDIOS Input Data Register (MDIOS_DINR27), Address offset: 16Ch */
+ __IO uint32_t DINR28; /*!< MDIOS Input Data Register (MDIOS_DINR28), Address offset: 170h */
+ __IO uint32_t DINR29; /*!< MDIOS Input Data Register (MDIOS_DINR29), Address offset: 174h */
+ __IO uint32_t DINR30; /*!< MDIOS Input Data Register (MDIOS_DINR30), Address offset: 178h */
+ __IO uint32_t DINR31; /*!< MDIOS Input Data Register (MDIOS_DINR31), Address offset: 17Ch */
+ __IO uint32_t DOUTR0; /*!< MDIOS Output Data Register (MDIOS_DOUTR0), Address offset: 180h */
+ __IO uint32_t DOUTR1; /*!< MDIOS Output Data Register (MDIOS_DOUTR1), Address offset: 184h */
+ __IO uint32_t DOUTR2; /*!< MDIOS Output Data Register (MDIOS_DOUTR2), Address offset: 188h */
+ __IO uint32_t DOUTR3; /*!< MDIOS Output Data Register (MDIOS_DOUTR3), Address offset: 18Ch */
+ __IO uint32_t DOUTR4; /*!< MDIOS Output Data Register (MDIOS_DOUTR4), Address offset: 190h */
+ __IO uint32_t DOUTR5; /*!< MDIOS Output Data Register (MDIOS_DOUTR5), Address offset: 194h */
+ __IO uint32_t DOUTR6; /*!< MDIOS Output Data Register (MDIOS_DOUTR6), Address offset: 198h */
+ __IO uint32_t DOUTR7; /*!< MDIOS Output Data Register (MDIOS_DOUTR7), Address offset: 19Ch */
+ __IO uint32_t DOUTR8; /*!< MDIOS Output Data Register (MDIOS_DOUTR8), Address offset: 1A0h */
+ __IO uint32_t DOUTR9; /*!< MDIOS Output Data Register (MDIOS_DOUTR9), Address offset: 1A4h */
+ __IO uint32_t DOUTR10; /*!< MDIOS Output Data Register (MDIOS_DOUTR10), Address offset: 1A8h */
+ __IO uint32_t DOUTR11; /*!< MDIOS Output Data Register (MDIOS_DOUTR11), Address offset: 1ACh */
+ __IO uint32_t DOUTR12; /*!< MDIOS Output Data Register (MDIOS_DOUTR12), Address offset: 1B0h */
+ __IO uint32_t DOUTR13; /*!< MDIOS Output Data Register (MDIOS_DOUTR13), Address offset: 1B4h */
+ __IO uint32_t DOUTR14; /*!< MDIOS Output Data Register (MDIOS_DOUTR14), Address offset: 1B8h */
+ __IO uint32_t DOUTR15; /*!< MDIOS Output Data Register (MDIOS_DOUTR15), Address offset: 1BCh */
+ __IO uint32_t DOUTR16; /*!< MDIOS Output Data Register (MDIOS_DOUTR16), Address offset: 1C0h */
+ __IO uint32_t DOUTR17; /*!< MDIOS Output Data Register (MDIOS_DOUTR17), Address offset: 1C4h */
+ __IO uint32_t DOUTR18; /*!< MDIOS Output Data Register (MDIOS_DOUTR18), Address offset: 1C8h */
+ __IO uint32_t DOUTR19; /*!< MDIOS Output Data Register (MDIOS_DOUTR19), Address offset: 1CCh */
+ __IO uint32_t DOUTR20; /*!< MDIOS Output Data Register (MDIOS_DOUTR20), Address offset: 1D0h */
+ __IO uint32_t DOUTR21; /*!< MDIOS Output Data Register (MDIOS_DOUTR21), Address offset: 1D4h */
+ __IO uint32_t DOUTR22; /*!< MDIOS Output Data Register (MDIOS_DOUTR22), Address offset: 1D8h */
+ __IO uint32_t DOUTR23; /*!< MDIOS Output Data Register (MDIOS_DOUTR23), Address offset: 1DCh */
+ __IO uint32_t DOUTR24; /*!< MDIOS Output Data Register (MDIOS_DOUTR24), Address offset: 1E0h */
+ __IO uint32_t DOUTR25; /*!< MDIOS Output Data Register (MDIOS_DOUTR25), Address offset: 1E4h */
+ __IO uint32_t DOUTR26; /*!< MDIOS Output Data Register (MDIOS_DOUTR26), Address offset: 1E8h */
+ __IO uint32_t DOUTR27; /*!< MDIOS Output Data Register (MDIOS_DOUTR27), Address offset: 1ECh */
+ __IO uint32_t DOUTR28; /*!< MDIOS Output Data Register (MDIOS_DOUTR28), Address offset: 1F0h */
+ __IO uint32_t DOUTR29; /*!< MDIOS Output Data Register (MDIOS_DOUTR29), Address offset: 1F4h */
+ __IO uint32_t DOUTR30; /*!< MDIOS Output Data Register (MDIOS_DOUTR30), Address offset: 1F8h */
+ __IO uint32_t DOUTR31; /*!< MDIOS Output Data Register (MDIOS_DOUTR31), Address offset: 1FCh */
+} MDIOS_TypeDef;
+
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+#define RAMITCM_BASE 0x00000000U /*!< Base address of : 16KB RAM reserved for CPU execution/instruction accessible over ITCM */
+#define FLASHITCM_BASE 0x00200000U /*!< Base address of : (up to 2 MB) embedded FLASH memory accessible over ITCM */
+#define FLASHAXI_BASE 0x08000000U /*!< Base address of : (up to 2 MB) embedded FLASH memory accessible over AXI */
+#define RAMDTCM_BASE 0x20000000U /*!< Base address of : 128KB system data RAM accessible over DTCM */
+#define PERIPH_BASE 0x40000000U /*!< Base address of : AHB/ABP Peripherals */
+#define BKPSRAM_BASE 0x40024000U /*!< Base address of : Backup SRAM(4 KB) */
+#define QSPI_BASE 0x90000000U /*!< Base address of : QSPI memories accessible over AXI */
+#define FMC_R_BASE 0xA0000000U /*!< Base address of : FMC Control registers */
+#define QSPI_R_BASE 0xA0001000U /*!< Base address of : QSPI Control registers */
+#define SRAM1_BASE 0x20020000U /*!< Base address of : 368KB RAM1 accessible over AXI/AHB */
+#define SRAM2_BASE 0x2007C000U /*!< Base address of : 16KB RAM2 accessible over AXI/AHB */
+#define FLASH_END 0x081FFFFFU /*!< FLASH end address */
+#define FLASH_OTP_BASE 0x1FF0F000U /*!< Base address of : (up to 1024 Bytes) embedded FLASH OTP Area */
+#define FLASH_OTP_END 0x1FF0F41FU /*!< End address of : (up to 1024 Bytes) embedded FLASH OTP Area */
+
+/* Legacy define */
+#define FLASH_BASE FLASHAXI_BASE
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000U)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000U)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000U)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x0000U)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x0400U)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x0800U)
+#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00U)
+#define TIM6_BASE (APB1PERIPH_BASE + 0x1000U)
+#define TIM7_BASE (APB1PERIPH_BASE + 0x1400U)
+#define TIM12_BASE (APB1PERIPH_BASE + 0x1800U)
+#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00U)
+#define TIM14_BASE (APB1PERIPH_BASE + 0x2000U)
+#define LPTIM1_BASE (APB1PERIPH_BASE + 0x2400U)
+#define RTC_BASE (APB1PERIPH_BASE + 0x2800U)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00U)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x3000U)
+#define CAN3_BASE (APB1PERIPH_BASE + 0x3400U)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x3800U)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00U)
+#define SPDIFRX_BASE (APB1PERIPH_BASE + 0x4000U)
+#define USART2_BASE (APB1PERIPH_BASE + 0x4400U)
+#define USART3_BASE (APB1PERIPH_BASE + 0x4800U)
+#define UART4_BASE (APB1PERIPH_BASE + 0x4C00U)
+#define UART5_BASE (APB1PERIPH_BASE + 0x5000U)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x5400U)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x5800U)
+#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00U)
+#define I2C4_BASE (APB1PERIPH_BASE + 0x6000U)
+#define CAN1_BASE (APB1PERIPH_BASE + 0x6400U)
+#define CAN2_BASE (APB1PERIPH_BASE + 0x6800U)
+#define CEC_BASE (APB1PERIPH_BASE + 0x6C00U)
+#define PWR_BASE (APB1PERIPH_BASE + 0x7000U)
+#define DAC_BASE (APB1PERIPH_BASE + 0x7400U)
+#define UART7_BASE (APB1PERIPH_BASE + 0x7800U)
+#define UART8_BASE (APB1PERIPH_BASE + 0x7C00U)
+
+/*!< APB2 peripherals */
+#define TIM1_BASE (APB2PERIPH_BASE + 0x0000U)
+#define TIM8_BASE (APB2PERIPH_BASE + 0x0400U)
+#define USART1_BASE (APB2PERIPH_BASE + 0x1000U)
+#define USART6_BASE (APB2PERIPH_BASE + 0x1400U)
+#define SDMMC2_BASE (APB2PERIPH_BASE + 0x1C00U)
+#define ADC1_BASE (APB2PERIPH_BASE + 0x2000U)
+#define ADC2_BASE (APB2PERIPH_BASE + 0x2100U)
+#define ADC3_BASE (APB2PERIPH_BASE + 0x2200U)
+#define ADC_BASE (APB2PERIPH_BASE + 0x2300U)
+#define SDMMC1_BASE (APB2PERIPH_BASE + 0x2C00U)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x3000U)
+#define SPI4_BASE (APB2PERIPH_BASE + 0x3400U)
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800U)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00U)
+#define TIM9_BASE (APB2PERIPH_BASE + 0x4000U)
+#define TIM10_BASE (APB2PERIPH_BASE + 0x4400U)
+#define TIM11_BASE (APB2PERIPH_BASE + 0x4800U)
+#define SPI5_BASE (APB2PERIPH_BASE + 0x5000U)
+#define SPI6_BASE (APB2PERIPH_BASE + 0x5400U)
+#define SAI1_BASE (APB2PERIPH_BASE + 0x5800U)
+#define SAI2_BASE (APB2PERIPH_BASE + 0x5C00U)
+#define SAI1_Block_A_BASE (SAI1_BASE + 0x004U)
+#define SAI1_Block_B_BASE (SAI1_BASE + 0x024U)
+#define SAI2_Block_A_BASE (SAI2_BASE + 0x004U)
+#define SAI2_Block_B_BASE (SAI2_BASE + 0x024U)
+#define LTDC_BASE (APB2PERIPH_BASE + 0x6800U)
+#define LTDC_Layer1_BASE (LTDC_BASE + 0x84U)
+#define LTDC_Layer2_BASE (LTDC_BASE + 0x104U)
+#define DFSDM1_BASE (APB2PERIPH_BASE + 0x7400U)
+#define DFSDM1_Channel0_BASE (DFSDM1_BASE + 0x00U)
+#define DFSDM1_Channel1_BASE (DFSDM1_BASE + 0x20U)
+#define DFSDM1_Channel2_BASE (DFSDM1_BASE + 0x40U)
+#define DFSDM1_Channel3_BASE (DFSDM1_BASE + 0x60U)
+#define DFSDM1_Channel4_BASE (DFSDM1_BASE + 0x80U)
+#define DFSDM1_Channel5_BASE (DFSDM1_BASE + 0xA0U)
+#define DFSDM1_Channel6_BASE (DFSDM1_BASE + 0xC0U)
+#define DFSDM1_Channel7_BASE (DFSDM1_BASE + 0xE0U)
+#define DFSDM1_Filter0_BASE (DFSDM1_BASE + 0x100U)
+#define DFSDM1_Filter1_BASE (DFSDM1_BASE + 0x180U)
+#define DFSDM1_Filter2_BASE (DFSDM1_BASE + 0x200U)
+#define DFSDM1_Filter3_BASE (DFSDM1_BASE + 0x280U)
+#define MDIOS_BASE (APB2PERIPH_BASE + 0x7800U)
+/*!< AHB1 peripherals */
+#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000U)
+#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400U)
+#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800U)
+#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00U)
+#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000U)
+#define GPIOF_BASE (AHB1PERIPH_BASE + 0x1400U)
+#define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800U)
+#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00U)
+#define GPIOI_BASE (AHB1PERIPH_BASE + 0x2000U)
+#define GPIOJ_BASE (AHB1PERIPH_BASE + 0x2400U)
+#define GPIOK_BASE (AHB1PERIPH_BASE + 0x2800U)
+#define CRC_BASE (AHB1PERIPH_BASE + 0x3000U)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x3800U)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00U)
+#define UID_BASE 0x1FF0F420U /*!< Unique device ID register base address */
+#define FLASHSIZE_BASE 0x1FF0F442U /*!< FLASH Size register base address */
+#define PACKAGE_BASE 0x1FFF7BF0U /*!< Package size register base address */
+/* Legacy define */
+#define PACKAGESIZE_BASE PACKAGE_BASE
+
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000U)
+#define DMA1_Stream0_BASE (DMA1_BASE + 0x010U)
+#define DMA1_Stream1_BASE (DMA1_BASE + 0x028U)
+#define DMA1_Stream2_BASE (DMA1_BASE + 0x040U)
+#define DMA1_Stream3_BASE (DMA1_BASE + 0x058U)
+#define DMA1_Stream4_BASE (DMA1_BASE + 0x070U)
+#define DMA1_Stream5_BASE (DMA1_BASE + 0x088U)
+#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0U)
+#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8U)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400U)
+#define DMA2_Stream0_BASE (DMA2_BASE + 0x010U)
+#define DMA2_Stream1_BASE (DMA2_BASE + 0x028U)
+#define DMA2_Stream2_BASE (DMA2_BASE + 0x040U)
+#define DMA2_Stream3_BASE (DMA2_BASE + 0x058U)
+#define DMA2_Stream4_BASE (DMA2_BASE + 0x070U)
+#define DMA2_Stream5_BASE (DMA2_BASE + 0x088U)
+#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0U)
+#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8U)
+#define ETH_BASE (AHB1PERIPH_BASE + 0x8000U)
+#define ETH_MAC_BASE (ETH_BASE)
+#define ETH_MMC_BASE (ETH_BASE + 0x0100U)
+#define ETH_PTP_BASE (ETH_BASE + 0x0700U)
+#define ETH_DMA_BASE (ETH_BASE + 0x1000U)
+#define DMA2D_BASE (AHB1PERIPH_BASE + 0xB000U)
+/*!< AHB2 peripherals */
+#define DCMI_BASE (AHB2PERIPH_BASE + 0x50000U)
+#define JPEG_BASE (AHB2PERIPH_BASE + 0x51000U)
+#define RNG_BASE (AHB2PERIPH_BASE + 0x60800U)
+/*!< FMC Bankx registers base address */
+#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000U)
+#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104U)
+#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080U)
+#define FMC_Bank5_6_R_BASE (FMC_R_BASE + 0x0140U)
+
+/* Debug MCU registers base address */
+#define DBGMCU_BASE 0xE0042000U
+
+/*!< USB registers base address */
+#define USB_OTG_HS_PERIPH_BASE 0x40040000U
+#define USB_OTG_FS_PERIPH_BASE 0x50000000U
+
+#define USB_OTG_GLOBAL_BASE 0x000U
+#define USB_OTG_DEVICE_BASE 0x800U
+#define USB_OTG_IN_ENDPOINT_BASE 0x900U
+#define USB_OTG_OUT_ENDPOINT_BASE 0xB00U
+#define USB_OTG_EP_REG_SIZE 0x20U
+#define USB_OTG_HOST_BASE 0x400U
+#define USB_OTG_HOST_PORT_BASE 0x440U
+#define USB_OTG_HOST_CHANNEL_BASE 0x500U
+#define USB_OTG_HOST_CHANNEL_SIZE 0x20U
+#define USB_OTG_PCGCCTL_BASE 0xE00U
+#define USB_OTG_FIFO_BASE 0x1000U
+#define USB_OTG_FIFO_SIZE 0x1000U
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define TIM12 ((TIM_TypeDef *) TIM12_BASE)
+#define TIM13 ((TIM_TypeDef *) TIM13_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define SPDIFRX ((SPDIFRX_TypeDef *) SPDIFRX_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define UART4 ((USART_TypeDef *) UART4_BASE)
+#define UART5 ((USART_TypeDef *) UART5_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define I2C3 ((I2C_TypeDef *) I2C3_BASE)
+#define I2C4 ((I2C_TypeDef *) I2C4_BASE)
+#define CAN1 ((CAN_TypeDef *) CAN1_BASE)
+#define CAN2 ((CAN_TypeDef *) CAN2_BASE)
+#define CEC ((CEC_TypeDef *) CEC_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC1 ((DAC_TypeDef *) DAC_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE) /* Kept for legacy purpose */
+#define UART7 ((USART_TypeDef *) UART7_BASE)
+#define UART8 ((USART_TypeDef *) UART8_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define TIM8 ((TIM_TypeDef *) TIM8_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC2 ((ADC_TypeDef *) ADC2_BASE)
+#define ADC3 ((ADC_TypeDef *) ADC3_BASE)
+#define ADC123_COMMON ((ADC_Common_TypeDef *) ADC_BASE)
+#define SDMMC1 ((SDMMC_TypeDef *) SDMMC1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define SPI4 ((SPI_TypeDef *) SPI4_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
+#define SPI5 ((SPI_TypeDef *) SPI5_BASE)
+#define SPI6 ((SPI_TypeDef *) SPI6_BASE)
+#define SAI1 ((SAI_TypeDef *) SAI1_BASE)
+#define SAI2 ((SAI_TypeDef *) SAI2_BASE)
+#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE)
+#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE)
+#define SAI2_Block_A ((SAI_Block_TypeDef *)SAI2_Block_A_BASE)
+#define SAI2_Block_B ((SAI_Block_TypeDef *)SAI2_Block_B_BASE)
+#define LTDC ((LTDC_TypeDef *)LTDC_BASE)
+#define LTDC_Layer1 ((LTDC_Layer_TypeDef *)LTDC_Layer1_BASE)
+#define LTDC_Layer2 ((LTDC_Layer_TypeDef *)LTDC_Layer2_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE)
+#define GPIOJ ((GPIO_TypeDef *) GPIOJ_BASE)
+#define GPIOK ((GPIO_TypeDef *) GPIOK_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+#define ETH ((ETH_TypeDef *) ETH_BASE)
+#define DMA2D ((DMA2D_TypeDef *)DMA2D_BASE)
+#define DCMI ((DCMI_TypeDef *) DCMI_BASE)
+#define RNG ((RNG_TypeDef *) RNG_BASE)
+#define FMC_Bank1 ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE)
+#define FMC_Bank1E ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE)
+#define FMC_Bank3 ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE)
+#define FMC_Bank5_6 ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE)
+#define QUADSPI ((QUADSPI_TypeDef *) QSPI_R_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE)
+#define USB_OTG_HS ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE)
+#define CAN3 ((CAN_TypeDef *) CAN3_BASE)
+#define SDMMC2 ((SDMMC_TypeDef *) SDMMC2_BASE)
+#define MDIOS ((MDIOS_TypeDef *) MDIOS_BASE)
+#define DFSDM1_Channel0 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel0_BASE)
+#define DFSDM1_Channel1 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel1_BASE)
+#define DFSDM1_Channel2 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel2_BASE)
+#define DFSDM1_Channel3 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel3_BASE)
+#define DFSDM1_Channel4 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel4_BASE)
+#define DFSDM1_Channel5 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel5_BASE)
+#define DFSDM1_Channel6 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel6_BASE)
+#define DFSDM1_Channel7 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel7_BASE)
+#define DFSDM1_Filter0 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter0_BASE)
+#define DFSDM1_Filter1 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter1_BASE)
+#define DFSDM1_Filter2 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter2_BASE)
+#define DFSDM1_Filter3 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter3_BASE)
+#define JPEG ((JPEG_TypeDef *) JPEG_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter */
+/* */
+/******************************************************************************/
+/******************** Bit definition for ADC_SR register ********************/
+#define ADC_SR_AWD_Pos (0U)
+#define ADC_SR_AWD_Msk (0x1U << ADC_SR_AWD_Pos) /*!< 0x00000001 */
+#define ADC_SR_AWD ADC_SR_AWD_Msk /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f7xx
+ * @{
+ */
+
+#ifndef __STM32F7xx_H
+#define __STM32F7xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/**
+ * @brief STM32 Family
+ */
+#if !defined (STM32F7)
+#define STM32F7
+#endif /* STM32F7 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+#if !defined (STM32F756xx) && !defined (STM32F746xx) && !defined (STM32F745xx) && !defined (STM32F767xx) && \
+ !defined (STM32F769xx) && !defined (STM32F777xx) && !defined (STM32F779xx) && !defined (STM32F722xx) && \
+ !defined (STM32F723xx) && !defined (STM32F732xx) && !defined (STM32F733xx)
+ /* #define STM32F756xx */ /*!< STM32F756VG, STM32F756ZG, STM32F756ZG, STM32F756IG, STM32F756BG,
+ STM32F756NG Devices */
+ /* #define STM32F746xx */ /*!< STM32F746VE, STM32F746VG, STM32F746ZE, STM32F746ZG, STM32F746IE, STM32F746IG,
+ STM32F746BE, STM32F746BG, STM32F746NE, STM32F746NG Devices */
+ /* #define STM32F745xx */ /*!< STM32F745VE, STM32F745VG, STM32F745ZG, STM32F745ZE, STM32F745IE, STM32F745IG Devices */
+ /* #define STM32F765xx */ /*!< STM32F765BI, STM32F765BG, STM32F765NI, STM32F765NG, STM32F765II, STM32F765IG,
+ STM32F765ZI, STM32F765ZG, STM32F765VI, STM32F765VG Devices */
+ /* #define STM32F767xx */ /*!< STM32F767BG, STM32F767BI, STM32F767IG, STM32F767II, STM32F767NG, STM32F767NI,
+ STM32F767VG, STM32F767VI, STM32F767ZG, STM32F767ZI Devices */
+ /* #define STM32F769xx */ /*!< STM32F769AG, STM32F769AI, STM32F769BG, STM32F769BI, STM32F769IG, STM32F769II,
+ STM32F769NG, STM32F769NI, STM32F768AI Devices */
+ /* #define STM32F777xx */ /*!< STM32F777VI, STM32F777ZI, STM32F777II, STM32F777BI, STM32F777NI Devices */
+ /* #define STM32F779xx */ /*!< STM32F779II, STM32F779BI, STM32F779NI, STM32F779AI, STM32F778AI Devices */
+ /* #define STM32F722xx */ /*!< STM32F722IE, STM32F722ZE, STM32F722VE, STM32F722RE, STM32F722IC, STM32F722ZC,
+ STM32F722VC, STM32F722RC Devices */
+ /* #define STM32F723xx */ /*!< STM32F723IE, STM32F723ZE, STM32F723VE, STM32F723IC, STM32F723ZC, STM32F723VC Devices */
+ /* #define STM32F732xx */ /*!< STM32F732IE, STM32F732ZE, STM32F732VE, STM32F732RE Devices */
+ /* #define STM32F733xx */ /*!< STM32F733IE, STM32F733ZE, STM32F733VE Devices */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+ /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V1.2.2
+ */
+#define __STM32F7_CMSIS_VERSION_MAIN (0x01) /*!< [31:24] main version */
+#define __STM32F7_CMSIS_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */
+#define __STM32F7_CMSIS_VERSION_SUB2 (0x02) /*!< [15:8] sub2 version */
+#define __STM32F7_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F7_CMSIS_VERSION ((__STM32F7_CMSIS_VERSION_MAIN << 24)\
+ |(__STM32F7_CMSIS_VERSION_SUB1 << 16)\
+ |(__STM32F7_CMSIS_VERSION_SUB2 << 8 )\
+ |(__STM32F7_CMSIS_VERSION))
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+#if defined(STM32F722xx)
+ #include "stm32f722xx.h"
+#elif defined(STM32F723xx)
+ #include "stm32f723xx.h"
+#elif defined(STM32F732xx)
+ #include "stm32f732xx.h"
+#elif defined(STM32F733xx)
+ #include "stm32f733xx.h"
+#elif defined(STM32F756xx)
+ #include "stm32f756xx.h"
+#elif defined(STM32F746xx)
+ #include "stm32f746xx.h"
+#elif defined(STM32F745xx)
+ #include "stm32f745xx.h"
+#elif defined(STM32F765xx)
+ #include "stm32f765xx.h"
+#elif defined(STM32F767xx)
+ #include "stm32f767xx.h"
+#elif defined(STM32F769xx)
+ #include "stm32f769xx.h"
+#elif defined(STM32F777xx)
+ #include "stm32f777xx.h"
+#elif defined(STM32F779xx)
+ #include "stm32f779xx.h"
+#else
+ #error "Please select first the target STM32F7xx device used in your application (in stm32f7xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0U,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0U,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0U,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+/**
+ * @}
+ */
+
+#ifdef USE_HAL_DRIVER
+ #include "stm32f7xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F7xx_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h
new file mode 100644
index 00000000..140be1b6
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h
@@ -0,0 +1,123 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f7xx.h
+ * @author MCD Application Team
+ * @brief CMSIS Cortex-M7 Device System Source File for STM32F7xx devices.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f7xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F7XX_H
+#define __SYSTEM_STM32F7XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F7xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F7xx_System_Exported_Variables
+ * @{
+ */
+ /* The SystemCoreClock variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */
+extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F7xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F7xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F7xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F7XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/arm_common_tables.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/arm_common_tables.h
new file mode 100644
index 00000000..8742a569
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/arm_common_tables.h
@@ -0,0 +1,136 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
+*
+* $Date: 19. October 2015
+* $Revision: V.1.4.5 a
+*
+* Project: CMSIS DSP Library
+* Title: arm_common_tables.h
+*
+* Description: This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+* - Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* - Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in
+* the documentation and/or other materials provided with the
+* distribution.
+* - Neither the name of ARM LIMITED nor the names of its contributors
+* may be used to endorse or promote products derived from this
+* software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+#ifndef _ARM_COMMON_TABLES_H
+#define _ARM_COMMON_TABLES_H
+
+#include "arm_math.h"
+
+extern const uint16_t armBitRevTable[1024];
+extern const q15_t armRecipTableQ15[64];
+extern const q31_t armRecipTableQ31[64];
+/* extern const q31_t realCoefAQ31[1024]; */
+/* extern const q31_t realCoefBQ31[1024]; */
+extern const float32_t twiddleCoef_16[32];
+extern const float32_t twiddleCoef_32[64];
+extern const float32_t twiddleCoef_64[128];
+extern const float32_t twiddleCoef_128[256];
+extern const float32_t twiddleCoef_256[512];
+extern const float32_t twiddleCoef_512[1024];
+extern const float32_t twiddleCoef_1024[2048];
+extern const float32_t twiddleCoef_2048[4096];
+extern const float32_t twiddleCoef_4096[8192];
+#define twiddleCoef twiddleCoef_4096
+extern const q31_t twiddleCoef_16_q31[24];
+extern const q31_t twiddleCoef_32_q31[48];
+extern const q31_t twiddleCoef_64_q31[96];
+extern const q31_t twiddleCoef_128_q31[192];
+extern const q31_t twiddleCoef_256_q31[384];
+extern const q31_t twiddleCoef_512_q31[768];
+extern const q31_t twiddleCoef_1024_q31[1536];
+extern const q31_t twiddleCoef_2048_q31[3072];
+extern const q31_t twiddleCoef_4096_q31[6144];
+extern const q15_t twiddleCoef_16_q15[24];
+extern const q15_t twiddleCoef_32_q15[48];
+extern const q15_t twiddleCoef_64_q15[96];
+extern const q15_t twiddleCoef_128_q15[192];
+extern const q15_t twiddleCoef_256_q15[384];
+extern const q15_t twiddleCoef_512_q15[768];
+extern const q15_t twiddleCoef_1024_q15[1536];
+extern const q15_t twiddleCoef_2048_q15[3072];
+extern const q15_t twiddleCoef_4096_q15[6144];
+extern const float32_t twiddleCoef_rfft_32[32];
+extern const float32_t twiddleCoef_rfft_64[64];
+extern const float32_t twiddleCoef_rfft_128[128];
+extern const float32_t twiddleCoef_rfft_256[256];
+extern const float32_t twiddleCoef_rfft_512[512];
+extern const float32_t twiddleCoef_rfft_1024[1024];
+extern const float32_t twiddleCoef_rfft_2048[2048];
+extern const float32_t twiddleCoef_rfft_4096[4096];
+
+
+/* floating-point bit reversal tables */
+#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20 )
+#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48 )
+#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56 )
+#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208 )
+#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440 )
+#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448 )
+#define ARMBITREVINDEXTABLE1024_TABLE_LENGTH ((uint16_t)1800)
+#define ARMBITREVINDEXTABLE2048_TABLE_LENGTH ((uint16_t)3808)
+#define ARMBITREVINDEXTABLE4096_TABLE_LENGTH ((uint16_t)4032)
+
+extern const uint16_t armBitRevIndexTable16[ARMBITREVINDEXTABLE__16_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable32[ARMBITREVINDEXTABLE__32_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable64[ARMBITREVINDEXTABLE__64_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable128[ARMBITREVINDEXTABLE_128_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable256[ARMBITREVINDEXTABLE_256_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable512[ARMBITREVINDEXTABLE_512_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable1024[ARMBITREVINDEXTABLE1024_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE2048_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE4096_TABLE_LENGTH];
+
+/* fixed-point bit reversal tables */
+#define ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH ((uint16_t)12 )
+#define ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH ((uint16_t)24 )
+#define ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH ((uint16_t)56 )
+#define ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH ((uint16_t)112 )
+#define ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH ((uint16_t)240 )
+#define ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH ((uint16_t)480 )
+#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992 )
+#define ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH ((uint16_t)1984)
+#define ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH ((uint16_t)4032)
+
+extern const uint16_t armBitRevIndexTable_fixed_16[ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_32[ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_64[ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_128[ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_256[ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_512[ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_1024[ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_2048[ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_4096[ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH];
+
+/* Tables for Fast Math Sine and Cosine */
+extern const float32_t sinTable_f32[FAST_MATH_TABLE_SIZE + 1];
+extern const q31_t sinTable_q31[FAST_MATH_TABLE_SIZE + 1];
+extern const q15_t sinTable_q15[FAST_MATH_TABLE_SIZE + 1];
+
+#endif /* ARM_COMMON_TABLES_H */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/arm_const_structs.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/arm_const_structs.h
new file mode 100644
index 00000000..726d06eb
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/arm_const_structs.h
@@ -0,0 +1,79 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
+*
+* $Date: 19. March 2015
+* $Revision: V.1.4.5
+*
+* Project: CMSIS DSP Library
+* Title: arm_const_structs.h
+*
+* Description: This file has constant structs that are initialized for
+* user convenience. For example, some can be given as
+* arguments to the arm_cfft_f32() function.
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+* - Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* - Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in
+* the documentation and/or other materials provided with the
+* distribution.
+* - Neither the name of ARM LIMITED nor the names of its contributors
+* may be used to endorse or promote products derived from this
+* software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+#ifndef _ARM_CONST_STRUCTS_H
+#define _ARM_CONST_STRUCTS_H
+
+#include "arm_math.h"
+#include "arm_common_tables.h"
+
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096;
+
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096;
+
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096;
+
+#endif
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/arm_math.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/arm_math.h
new file mode 100644
index 00000000..d33f8a9b
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/arm_math.h
@@ -0,0 +1,7154 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2015 ARM Limited. All rights reserved.
+*
+* $Date: 20. October 2015
+* $Revision: V1.4.5 b
+*
+* Project: CMSIS DSP Library
+* Title: arm_math.h
+*
+* Description: Public header file for CMSIS DSP Library
+*
+* Target Processor: Cortex-M7/Cortex-M4/Cortex-M3/Cortex-M0
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+* - Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* - Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in
+* the documentation and/or other materials provided with the
+* distribution.
+* - Neither the name of ARM LIMITED nor the names of its contributors
+* may be used to endorse or promote products derived from this
+* software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+ * -------------------------------------------------------------------- */
+
+/**
+ \mainpage CMSIS DSP Software Library
+ *
+ * Introduction
+ * ------------
+ *
+ * This user manual describes the CMSIS DSP software library,
+ * a suite of common signal processing functions for use on Cortex-M processor based devices.
+ *
+ * The library is divided into a number of functions each covering a specific category:
+ * - Basic math functions
+ * - Fast math functions
+ * - Complex math functions
+ * - Filters
+ * - Matrix functions
+ * - Transforms
+ * - Motor control functions
+ * - Statistical functions
+ * - Support functions
+ * - Interpolation functions
+ *
+ * The library has separate functions for operating on 8-bit integers, 16-bit integers,
+ * 32-bit integer and 32-bit floating-point values.
+ *
+ * Using the Library
+ * ------------
+ *
+ * The library installer contains prebuilt versions of the libraries in the Lib folder.
+ * - arm_cortexM7lfdp_math.lib (Little endian and Double Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7bfdp_math.lib (Big endian and Double Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7lfsp_math.lib (Little endian and Single Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7bfsp_math.lib (Big endian and Single Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7l_math.lib (Little endian on Cortex-M7)
+ * - arm_cortexM7b_math.lib (Big endian on Cortex-M7)
+ * - arm_cortexM4lf_math.lib (Little endian and Floating Point Unit on Cortex-M4)
+ * - arm_cortexM4bf_math.lib (Big endian and Floating Point Unit on Cortex-M4)
+ * - arm_cortexM4l_math.lib (Little endian on Cortex-M4)
+ * - arm_cortexM4b_math.lib (Big endian on Cortex-M4)
+ * - arm_cortexM3l_math.lib (Little endian on Cortex-M3)
+ * - arm_cortexM3b_math.lib (Big endian on Cortex-M3)
+ * - arm_cortexM0l_math.lib (Little endian on Cortex-M0 / CortexM0+)
+ * - arm_cortexM0b_math.lib (Big endian on Cortex-M0 / CortexM0+)
+ *
+ * The library functions are declared in the public file arm_math.h which is placed in the Include folder.
+ * Simply include this file and link the appropriate library in the application and begin calling the library functions. The Library supports single
+ * public header file arm_math.h for Cortex-M7/M4/M3/M0/M0+ with little endian and big endian. Same header file will be used for floating point unit(FPU) variants.
+ * Define the appropriate pre processor MACRO ARM_MATH_CM7 or ARM_MATH_CM4 or ARM_MATH_CM3 or
+ * ARM_MATH_CM0 or ARM_MATH_CM0PLUS depending on the target processor in the application.
+ *
+ * Examples
+ * --------
+ *
+ * The library ships with a number of examples which demonstrate how to use the library functions.
+ *
+ * Toolchain Support
+ * ------------
+ *
+ * The library has been developed and tested with MDK-ARM version 5.14.0.0
+ * The library is being tested in GCC and IAR toolchains and updates on this activity will be made available shortly.
+ *
+ * Building the Library
+ * ------------
+ *
+ * The library installer contains a project file to re build libraries on MDK-ARM Tool chain in the CMSIS\\DSP_Lib\\Source\\ARM folder.
+ * - arm_cortexM_math.uvprojx
+ *
+ *
+ * The libraries can be built by opening the arm_cortexM_math.uvprojx project in MDK-ARM, selecting a specific target, and defining the optional pre processor MACROs detailed above.
+ *
+ * Pre-processor Macros
+ * ------------
+ *
+ * Each library project have differant pre-processor macros.
+ *
+ * - UNALIGNED_SUPPORT_DISABLE:
+ *
+ * Define macro UNALIGNED_SUPPORT_DISABLE, If the silicon does not support unaligned memory access
+ *
+ * - ARM_MATH_BIG_ENDIAN:
+ *
+ * Define macro ARM_MATH_BIG_ENDIAN to build the library for big endian targets. By default library builds for little endian targets.
+ *
+ * - ARM_MATH_MATRIX_CHECK:
+ *
+ * Define macro ARM_MATH_MATRIX_CHECK for checking on the input and output sizes of matrices
+ *
+ * - ARM_MATH_ROUNDING:
+ *
+ * Define macro ARM_MATH_ROUNDING for rounding on support functions
+ *
+ * - ARM_MATH_CMx:
+ *
+ * Define macro ARM_MATH_CM4 for building the library on Cortex-M4 target, ARM_MATH_CM3 for building library on Cortex-M3 target
+ * and ARM_MATH_CM0 for building library on Cortex-M0 target, ARM_MATH_CM0PLUS for building library on Cortex-M0+ target, and
+ * ARM_MATH_CM7 for building the library on cortex-M7.
+ *
+ * - __FPU_PRESENT:
+ *
+ * Initialize macro __FPU_PRESENT = 1 when building on FPU supported Targets. Enable this macro for M4bf and M4lf libraries
+ *
+ *
+ * CMSIS-DSP in ARM::CMSIS Pack
+ * -----------------------------
+ *
+ * The following files relevant to CMSIS-DSP are present in the ARM::CMSIS Pack directories:
+ * |File/Folder |Content |
+ * |------------------------------|------------------------------------------------------------------------|
+ * |\b CMSIS\\Documentation\\DSP | This documentation |
+ * |\b CMSIS\\DSP_Lib | Software license agreement (license.txt) |
+ * |\b CMSIS\\DSP_Lib\\Examples | Example projects demonstrating the usage of the library functions |
+ * |\b CMSIS\\DSP_Lib\\Source | Source files for rebuilding the library |
+ *
+ *
+ * Revision History of CMSIS-DSP
+ * ------------
+ * Please refer to \ref ChangeLog_pg.
+ *
+ * Copyright Notice
+ * ------------
+ *
+ * Copyright (C) 2010-2015 ARM Limited. All rights reserved.
+ */
+
+
+/**
+ * @defgroup groupMath Basic Math Functions
+ */
+
+/**
+ * @defgroup groupFastMath Fast Math Functions
+ * This set of functions provides a fast approximation to sine, cosine, and square root.
+ * As compared to most of the other functions in the CMSIS math library, the fast math functions
+ * operate on individual values and not arrays.
+ * There are separate functions for Q15, Q31, and floating-point data.
+ *
+ */
+
+/**
+ * @defgroup groupCmplxMath Complex Math Functions
+ * This set of functions operates on complex data vectors.
+ * The data in the complex arrays is stored in an interleaved fashion
+ * (real, imag, real, imag, ...).
+ * In the API functions, the number of samples in a complex array refers
+ * to the number of complex values; the array contains twice this number of
+ * real values.
+ */
+
+/**
+ * @defgroup groupFilters Filtering Functions
+ */
+
+/**
+ * @defgroup groupMatrix Matrix Functions
+ *
+ * This set of functions provides basic matrix math operations.
+ * The functions operate on matrix data structures. For example,
+ * the type
+ * definition for the floating-point matrix structure is shown
+ * below:
+ *
+ * typedef struct
+ * {
+ * uint16_t numRows; // number of rows of the matrix.
+ * uint16_t numCols; // number of columns of the matrix.
+ * float32_t *pData; // points to the data of the matrix.
+ * } arm_matrix_instance_f32;
+ *
+ * There are similar definitions for Q15 and Q31 data types.
+ *
+ * The structure specifies the size of the matrix and then points to
+ * an array of data. The array is of size numRows X numCols
+ * and the values are arranged in row order. That is, the
+ * matrix element (i, j) is stored at:
+ *
+ * pData[i*numCols + j]
+ *
+ *
+ * \par Init Functions
+ * There is an associated initialization function for each type of matrix
+ * data structure.
+ * The initialization function sets the values of the internal structure fields.
+ * Refer to the function arm_mat_init_f32(), arm_mat_init_q31()
+ * and arm_mat_init_q15() for floating-point, Q31 and Q15 types, respectively.
+ *
+ * \par
+ * Use of the initialization function is optional. However, if initialization function is used
+ * then the instance structure cannot be placed into a const data section.
+ * To place the instance structure in a const data
+ * section, manually initialize the data structure. For example:
+ *
+ * arm_matrix_instance_f32 S = {nRows, nColumns, pData};
+ * arm_matrix_instance_q31 S = {nRows, nColumns, pData};
+ * arm_matrix_instance_q15 S = {nRows, nColumns, pData};
+ *
+ * where nRows specifies the number of rows, nColumns
+ * specifies the number of columns, and pData points to the
+ * data array.
+ *
+ * \par Size Checking
+ * By default all of the matrix functions perform size checking on the input and
+ * output matrices. For example, the matrix addition function verifies that the
+ * two input matrices and the output matrix all have the same number of rows and
+ * columns. If the size check fails the functions return:
+ *
+ * ARM_MATH_SIZE_MISMATCH
+ *
+ * Otherwise the functions return
+ *
+ * ARM_MATH_SUCCESS
+ *
+ * There is some overhead associated with this matrix size checking.
+ * The matrix size checking is enabled via the \#define
+ *
+ * ARM_MATH_MATRIX_CHECK
+ *
+ * within the library project settings. By default this macro is defined
+ * and size checking is enabled. By changing the project settings and
+ * undefining this macro size checking is eliminated and the functions
+ * run a bit faster. With size checking disabled the functions always
+ * return ARM_MATH_SUCCESS.
+ */
+
+/**
+ * @defgroup groupTransforms Transform Functions
+ */
+
+/**
+ * @defgroup groupController Controller Functions
+ */
+
+/**
+ * @defgroup groupStats Statistics Functions
+ */
+/**
+ * @defgroup groupSupport Support Functions
+ */
+
+/**
+ * @defgroup groupInterpolation Interpolation Functions
+ * These functions perform 1- and 2-dimensional interpolation of data.
+ * Linear interpolation is used for 1-dimensional data and
+ * bilinear interpolation is used for 2-dimensional data.
+ */
+
+/**
+ * @defgroup groupExamples Examples
+ */
+#ifndef _ARM_MATH_H
+#define _ARM_MATH_H
+
+/* ignore some GCC warnings */
+#if defined ( __GNUC__ )
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wsign-conversion"
+#pragma GCC diagnostic ignored "-Wconversion"
+#pragma GCC diagnostic ignored "-Wunused-parameter"
+#endif
+
+#define __CMSIS_GENERIC /* disable NVIC and Systick functions */
+
+#if defined(ARM_MATH_CM7)
+ #include "core_cm7.h"
+#elif defined (ARM_MATH_CM4)
+ #include "core_cm4.h"
+#elif defined (ARM_MATH_CM3)
+ #include "core_cm3.h"
+#elif defined (ARM_MATH_CM0)
+ #include "core_cm0.h"
+ #define ARM_MATH_CM0_FAMILY
+#elif defined (ARM_MATH_CM0PLUS)
+ #include "core_cm0plus.h"
+ #define ARM_MATH_CM0_FAMILY
+#else
+ #error "Define according the used Cortex core ARM_MATH_CM7, ARM_MATH_CM4, ARM_MATH_CM3, ARM_MATH_CM0PLUS or ARM_MATH_CM0"
+#endif
+
+#undef __CMSIS_GENERIC /* enable NVIC and Systick functions */
+#include "string.h"
+#include "math.h"
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+
+ /**
+ * @brief Macros required for reciprocal calculation in Normalized LMS
+ */
+
+#define DELTA_Q31 (0x100)
+#define DELTA_Q15 0x5
+#define INDEX_MASK 0x0000003F
+#ifndef PI
+#define PI 3.14159265358979f
+#endif
+
+ /**
+ * @brief Macros required for SINE and COSINE Fast math approximations
+ */
+
+#define FAST_MATH_TABLE_SIZE 512
+#define FAST_MATH_Q31_SHIFT (32 - 10)
+#define FAST_MATH_Q15_SHIFT (16 - 10)
+#define CONTROLLER_Q31_SHIFT (32 - 9)
+#define TABLE_SIZE 256
+#define TABLE_SPACING_Q31 0x400000
+#define TABLE_SPACING_Q15 0x80
+
+ /**
+ * @brief Macros required for SINE and COSINE Controller functions
+ */
+ /* 1.31(q31) Fixed value of 2/360 */
+ /* -1 to +1 is divided into 360 values so total spacing is (2/360) */
+#define INPUT_SPACING 0xB60B61
+
+ /**
+ * @brief Macro for Unaligned Support
+ */
+#ifndef UNALIGNED_SUPPORT_DISABLE
+ #define ALIGN4
+#else
+ #if defined (__GNUC__)
+ #define ALIGN4 __attribute__((aligned(4)))
+ #else
+ #define ALIGN4 __align(4)
+ #endif
+#endif /* #ifndef UNALIGNED_SUPPORT_DISABLE */
+
+ /**
+ * @brief Error status returned by some functions in the library.
+ */
+
+ typedef enum
+ {
+ ARM_MATH_SUCCESS = 0, /**< No error */
+ ARM_MATH_ARGUMENT_ERROR = -1, /**< One or more arguments are incorrect */
+ ARM_MATH_LENGTH_ERROR = -2, /**< Length of data buffer is incorrect */
+ ARM_MATH_SIZE_MISMATCH = -3, /**< Size of matrices is not compatible with the operation. */
+ ARM_MATH_NANINF = -4, /**< Not-a-number (NaN) or infinity is generated */
+ ARM_MATH_SINGULAR = -5, /**< Generated by matrix inversion if the input matrix is singular and cannot be inverted. */
+ ARM_MATH_TEST_FAILURE = -6 /**< Test Failed */
+ } arm_status;
+
+ /**
+ * @brief 8-bit fractional data type in 1.7 format.
+ */
+ typedef int8_t q7_t;
+
+ /**
+ * @brief 16-bit fractional data type in 1.15 format.
+ */
+ typedef int16_t q15_t;
+
+ /**
+ * @brief 32-bit fractional data type in 1.31 format.
+ */
+ typedef int32_t q31_t;
+
+ /**
+ * @brief 64-bit fractional data type in 1.63 format.
+ */
+ typedef int64_t q63_t;
+
+ /**
+ * @brief 32-bit floating-point type definition.
+ */
+ typedef float float32_t;
+
+ /**
+ * @brief 64-bit floating-point type definition.
+ */
+ typedef double float64_t;
+
+ /**
+ * @brief definition to read/write two 16 bit values.
+ */
+#if defined __CC_ARM
+ #define __SIMD32_TYPE int32_t __packed
+ #define CMSIS_UNUSED __attribute__((unused))
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __SIMD32_TYPE int32_t
+ #define CMSIS_UNUSED __attribute__((unused))
+
+#elif defined __GNUC__
+ #define __SIMD32_TYPE int32_t
+ #define CMSIS_UNUSED __attribute__((unused))
+
+#elif defined __ICCARM__
+ #define __SIMD32_TYPE int32_t __packed
+ #define CMSIS_UNUSED
+
+#elif defined __CSMC__
+ #define __SIMD32_TYPE int32_t
+ #define CMSIS_UNUSED
+
+#elif defined __TASKING__
+ #define __SIMD32_TYPE __unaligned int32_t
+ #define CMSIS_UNUSED
+
+#else
+ #error Unknown compiler
+#endif
+
+#define __SIMD32(addr) (*(__SIMD32_TYPE **) & (addr))
+#define __SIMD32_CONST(addr) ((__SIMD32_TYPE *)(addr))
+#define _SIMD32_OFFSET(addr) (*(__SIMD32_TYPE *) (addr))
+#define __SIMD64(addr) (*(int64_t **) & (addr))
+
+#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
+ /**
+ * @brief definition to pack two 16 bit values.
+ */
+#define __PKHBT(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0x0000FFFF) | \
+ (((int32_t)(ARG2) << ARG3) & (int32_t)0xFFFF0000) )
+#define __PKHTB(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0xFFFF0000) | \
+ (((int32_t)(ARG2) >> ARG3) & (int32_t)0x0000FFFF) )
+
+#endif
+
+
+ /**
+ * @brief definition to pack four 8 bit values.
+ */
+#ifndef ARM_MATH_BIG_ENDIAN
+
+#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v0) << 0) & (int32_t)0x000000FF) | \
+ (((int32_t)(v1) << 8) & (int32_t)0x0000FF00) | \
+ (((int32_t)(v2) << 16) & (int32_t)0x00FF0000) | \
+ (((int32_t)(v3) << 24) & (int32_t)0xFF000000) )
+#else
+
+#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v3) << 0) & (int32_t)0x000000FF) | \
+ (((int32_t)(v2) << 8) & (int32_t)0x0000FF00) | \
+ (((int32_t)(v1) << 16) & (int32_t)0x00FF0000) | \
+ (((int32_t)(v0) << 24) & (int32_t)0xFF000000) )
+
+#endif
+
+
+ /**
+ * @brief Clips Q63 to Q31 values.
+ */
+ static __INLINE q31_t clip_q63_to_q31(
+ q63_t x)
+ {
+ return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
+ ((0x7FFFFFFF ^ ((q31_t) (x >> 63)))) : (q31_t) x;
+ }
+
+ /**
+ * @brief Clips Q63 to Q15 values.
+ */
+ static __INLINE q15_t clip_q63_to_q15(
+ q63_t x)
+ {
+ return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
+ ((0x7FFF ^ ((q15_t) (x >> 63)))) : (q15_t) (x >> 15);
+ }
+
+ /**
+ * @brief Clips Q31 to Q7 values.
+ */
+ static __INLINE q7_t clip_q31_to_q7(
+ q31_t x)
+ {
+ return ((q31_t) (x >> 24) != ((q31_t) x >> 23)) ?
+ ((0x7F ^ ((q7_t) (x >> 31)))) : (q7_t) x;
+ }
+
+ /**
+ * @brief Clips Q31 to Q15 values.
+ */
+ static __INLINE q15_t clip_q31_to_q15(
+ q31_t x)
+ {
+ return ((q31_t) (x >> 16) != ((q31_t) x >> 15)) ?
+ ((0x7FFF ^ ((q15_t) (x >> 31)))) : (q15_t) x;
+ }
+
+ /**
+ * @brief Multiplies 32 X 64 and returns 32 bit result in 2.30 format.
+ */
+
+ static __INLINE q63_t mult32x64(
+ q63_t x,
+ q31_t y)
+ {
+ return ((((q63_t) (x & 0x00000000FFFFFFFF) * y) >> 32) +
+ (((q63_t) (x >> 32) * y)));
+ }
+
+/*
+ #if defined (ARM_MATH_CM0_FAMILY) && defined ( __CC_ARM )
+ #define __CLZ __clz
+ #endif
+ */
+/* note: function can be removed when all toolchain support __CLZ for Cortex-M0 */
+#if defined (ARM_MATH_CM0_FAMILY) && ((defined (__ICCARM__)) )
+ static __INLINE uint32_t __CLZ(
+ q31_t data);
+
+ static __INLINE uint32_t __CLZ(
+ q31_t data)
+ {
+ uint32_t count = 0;
+ uint32_t mask = 0x80000000;
+
+ while((data & mask) == 0)
+ {
+ count += 1u;
+ mask = mask >> 1u;
+ }
+
+ return (count);
+ }
+#endif
+
+ /**
+ * @brief Function to Calculates 1/in (reciprocal) value of Q31 Data type.
+ */
+
+ static __INLINE uint32_t arm_recip_q31(
+ q31_t in,
+ q31_t * dst,
+ q31_t * pRecipTable)
+ {
+ q31_t out;
+ uint32_t tempVal;
+ uint32_t index, i;
+ uint32_t signBits;
+
+ if(in > 0)
+ {
+ signBits = ((uint32_t) (__CLZ( in) - 1));
+ }
+ else
+ {
+ signBits = ((uint32_t) (__CLZ(-in) - 1));
+ }
+
+ /* Convert input sample to 1.31 format */
+ in = (in << signBits);
+
+ /* calculation of index for initial approximated Val */
+ index = (uint32_t)(in >> 24);
+ index = (index & INDEX_MASK);
+
+ /* 1.31 with exp 1 */
+ out = pRecipTable[index];
+
+ /* calculation of reciprocal value */
+ /* running approximation for two iterations */
+ for (i = 0u; i < 2u; i++)
+ {
+ tempVal = (uint32_t) (((q63_t) in * out) >> 31);
+ tempVal = 0x7FFFFFFFu - tempVal;
+ /* 1.31 with exp 1 */
+ /* out = (q31_t) (((q63_t) out * tempVal) >> 30); */
+ out = clip_q63_to_q31(((q63_t) out * tempVal) >> 30);
+ }
+
+ /* write output */
+ *dst = out;
+
+ /* return num of signbits of out = 1/in value */
+ return (signBits + 1u);
+ }
+
+
+ /**
+ * @brief Function to Calculates 1/in (reciprocal) value of Q15 Data type.
+ */
+ static __INLINE uint32_t arm_recip_q15(
+ q15_t in,
+ q15_t * dst,
+ q15_t * pRecipTable)
+ {
+ q15_t out = 0;
+ uint32_t tempVal = 0;
+ uint32_t index = 0, i = 0;
+ uint32_t signBits = 0;
+
+ if(in > 0)
+ {
+ signBits = ((uint32_t)(__CLZ( in) - 17));
+ }
+ else
+ {
+ signBits = ((uint32_t)(__CLZ(-in) - 17));
+ }
+
+ /* Convert input sample to 1.15 format */
+ in = (in << signBits);
+
+ /* calculation of index for initial approximated Val */
+ index = (uint32_t)(in >> 8);
+ index = (index & INDEX_MASK);
+
+ /* 1.15 with exp 1 */
+ out = pRecipTable[index];
+
+ /* calculation of reciprocal value */
+ /* running approximation for two iterations */
+ for (i = 0u; i < 2u; i++)
+ {
+ tempVal = (uint32_t) (((q31_t) in * out) >> 15);
+ tempVal = 0x7FFFu - tempVal;
+ /* 1.15 with exp 1 */
+ out = (q15_t) (((q31_t) out * tempVal) >> 14);
+ /* out = clip_q31_to_q15(((q31_t) out * tempVal) >> 14); */
+ }
+
+ /* write output */
+ *dst = out;
+
+ /* return num of signbits of out = 1/in value */
+ return (signBits + 1);
+ }
+
+
+ /*
+ * @brief C custom defined intrinisic function for only M0 processors
+ */
+#if defined(ARM_MATH_CM0_FAMILY)
+ static __INLINE q31_t __SSAT(
+ q31_t x,
+ uint32_t y)
+ {
+ int32_t posMax, negMin;
+ uint32_t i;
+
+ posMax = 1;
+ for (i = 0; i < (y - 1); i++)
+ {
+ posMax = posMax * 2;
+ }
+
+ if(x > 0)
+ {
+ posMax = (posMax - 1);
+
+ if(x > posMax)
+ {
+ x = posMax;
+ }
+ }
+ else
+ {
+ negMin = -posMax;
+
+ if(x < negMin)
+ {
+ x = negMin;
+ }
+ }
+ return (x);
+ }
+#endif /* end of ARM_MATH_CM0_FAMILY */
+
+
+ /*
+ * @brief C custom defined intrinsic function for M3 and M0 processors
+ */
+#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
+
+ /*
+ * @brief C custom defined QADD8 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QADD8(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s, t, u;
+
+ r = __SSAT(((((q31_t)x << 24) >> 24) + (((q31_t)y << 24) >> 24)), 8) & (int32_t)0x000000FF;
+ s = __SSAT(((((q31_t)x << 16) >> 24) + (((q31_t)y << 16) >> 24)), 8) & (int32_t)0x000000FF;
+ t = __SSAT(((((q31_t)x << 8) >> 24) + (((q31_t)y << 8) >> 24)), 8) & (int32_t)0x000000FF;
+ u = __SSAT(((((q31_t)x ) >> 24) + (((q31_t)y ) >> 24)), 8) & (int32_t)0x000000FF;
+
+ return ((uint32_t)((u << 24) | (t << 16) | (s << 8) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QSUB8 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QSUB8(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s, t, u;
+
+ r = __SSAT(((((q31_t)x << 24) >> 24) - (((q31_t)y << 24) >> 24)), 8) & (int32_t)0x000000FF;
+ s = __SSAT(((((q31_t)x << 16) >> 24) - (((q31_t)y << 16) >> 24)), 8) & (int32_t)0x000000FF;
+ t = __SSAT(((((q31_t)x << 8) >> 24) - (((q31_t)y << 8) >> 24)), 8) & (int32_t)0x000000FF;
+ u = __SSAT(((((q31_t)x ) >> 24) - (((q31_t)y ) >> 24)), 8) & (int32_t)0x000000FF;
+
+ return ((uint32_t)((u << 24) | (t << 16) | (s << 8) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QADD16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QADD16(
+ uint32_t x,
+ uint32_t y)
+ {
+/* q31_t r, s; without initialisation 'arm_offset_q15 test' fails but 'intrinsic' tests pass! for armCC */
+ q31_t r = 0, s = 0;
+
+ r = __SSAT(((((q31_t)x << 16) >> 16) + (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
+ s = __SSAT(((((q31_t)x ) >> 16) + (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SHADD16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SHADD16(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = (((((q31_t)x << 16) >> 16) + (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+ s = (((((q31_t)x ) >> 16) + (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QSUB16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QSUB16(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = __SSAT(((((q31_t)x << 16) >> 16) - (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
+ s = __SSAT(((((q31_t)x ) >> 16) - (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SHSUB16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SHSUB16(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = (((((q31_t)x << 16) >> 16) - (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+ s = (((((q31_t)x ) >> 16) - (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QASX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QASX(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = __SSAT(((((q31_t)x << 16) >> 16) - (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
+ s = __SSAT(((((q31_t)x ) >> 16) + (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SHASX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SHASX(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = (((((q31_t)x << 16) >> 16) - (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+ s = (((((q31_t)x ) >> 16) + (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QSAX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QSAX(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = __SSAT(((((q31_t)x << 16) >> 16) + (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
+ s = __SSAT(((((q31_t)x ) >> 16) - (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SHSAX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SHSAX(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = (((((q31_t)x << 16) >> 16) + (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+ s = (((((q31_t)x ) >> 16) - (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SMUSDX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMUSDX(
+ uint32_t x,
+ uint32_t y)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) -
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) ));
+ }
+
+ /*
+ * @brief C custom defined SMUADX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMUADX(
+ uint32_t x,
+ uint32_t y)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) ));
+ }
+
+
+ /*
+ * @brief C custom defined QADD for M3 and M0 processors
+ */
+ static __INLINE int32_t __QADD(
+ int32_t x,
+ int32_t y)
+ {
+ return ((int32_t)(clip_q63_to_q31((q63_t)x + (q31_t)y)));
+ }
+
+
+ /*
+ * @brief C custom defined QSUB for M3 and M0 processors
+ */
+ static __INLINE int32_t __QSUB(
+ int32_t x,
+ int32_t y)
+ {
+ return ((int32_t)(clip_q63_to_q31((q63_t)x - (q31_t)y)));
+ }
+
+
+ /*
+ * @brief C custom defined SMLAD for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMLAD(
+ uint32_t x,
+ uint32_t y,
+ uint32_t sum)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) +
+ ( ((q31_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMLADX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMLADX(
+ uint32_t x,
+ uint32_t y,
+ uint32_t sum)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ( ((q31_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMLSDX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMLSDX(
+ uint32_t x,
+ uint32_t y,
+ uint32_t sum)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) -
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ( ((q31_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMLALD for M3 and M0 processors
+ */
+ static __INLINE uint64_t __SMLALD(
+ uint32_t x,
+ uint32_t y,
+ uint64_t sum)
+ {
+/* return (sum + ((q15_t) (x >> 16) * (q15_t) (y >> 16)) + ((q15_t) x * (q15_t) y)); */
+ return ((uint64_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) +
+ ( ((q63_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMLALDX for M3 and M0 processors
+ */
+ static __INLINE uint64_t __SMLALDX(
+ uint32_t x,
+ uint32_t y,
+ uint64_t sum)
+ {
+/* return (sum + ((q15_t) (x >> 16) * (q15_t) y)) + ((q15_t) x * (q15_t) (y >> 16)); */
+ return ((uint64_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ( ((q63_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMUAD for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMUAD(
+ uint32_t x,
+ uint32_t y)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMUSD for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMUSD(
+ uint32_t x,
+ uint32_t y)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) -
+ ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) ));
+ }
+
+
+ /*
+ * @brief C custom defined SXTB16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SXTB16(
+ uint32_t x)
+ {
+ return ((uint32_t)(((((q31_t)x << 24) >> 24) & (q31_t)0x0000FFFF) |
+ ((((q31_t)x << 8) >> 8) & (q31_t)0xFFFF0000) ));
+ }
+
+#endif /* defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) */
+
+
+ /**
+ * @brief Instance structure for the Q7 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q7_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ } arm_fir_instance_q7;
+
+ /**
+ * @brief Instance structure for the Q15 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ } arm_fir_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ } arm_fir_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ } arm_fir_instance_f32;
+
+
+ /**
+ * @brief Processing function for the Q7 FIR filter.
+ * @param[in] S points to an instance of the Q7 FIR filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_q7(
+ const arm_fir_instance_q7 * S,
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q7 FIR filter.
+ * @param[in,out] S points to an instance of the Q7 FIR structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed.
+ */
+ void arm_fir_init_q7(
+ arm_fir_instance_q7 * S,
+ uint16_t numTaps,
+ q7_t * pCoeffs,
+ q7_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR filter.
+ * @param[in] S points to an instance of the Q15 FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_q15(
+ const arm_fir_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the fast Q15 FIR filter for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q15 FIR filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_fast_q15(
+ const arm_fir_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR filter.
+ * @param[in,out] S points to an instance of the Q15 FIR filter structure.
+ * @param[in] numTaps Number of filter coefficients in the filter. Must be even and greater than or equal to 4.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ * @return The function returns ARM_MATH_SUCCESS if initialization was successful or ARM_MATH_ARGUMENT_ERROR if
+ * numTaps is not a supported value.
+ */
+ arm_status arm_fir_init_q15(
+ arm_fir_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 FIR filter.
+ * @param[in] S points to an instance of the Q31 FIR filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_q31(
+ const arm_fir_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the fast Q31 FIR filter for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q31 FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_fast_q31(
+ const arm_fir_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 FIR filter.
+ * @param[in,out] S points to an instance of the Q31 FIR structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ */
+ void arm_fir_init_q31(
+ arm_fir_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point FIR filter.
+ * @param[in] S points to an instance of the floating-point FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_f32(
+ const arm_fir_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point FIR filter.
+ * @param[in,out] S points to an instance of the floating-point FIR filter structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ */
+ void arm_fir_init_f32(
+ arm_fir_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 Biquad cascade filter.
+ */
+ typedef struct
+ {
+ int8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q15_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ q15_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+ int8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
+ } arm_biquad_casd_df1_inst_q15;
+
+ /**
+ * @brief Instance structure for the Q31 Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q31_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ q31_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+ uint8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
+ } arm_biquad_casd_df1_inst_q31;
+
+ /**
+ * @brief Instance structure for the floating-point Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ float32_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_casd_df1_inst_f32;
+
+
+ /**
+ * @brief Processing function for the Q15 Biquad cascade filter.
+ * @param[in] S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_q15(
+ const arm_biquad_casd_df1_inst_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 Biquad cascade filter.
+ * @param[in,out] S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format
+ */
+ void arm_biquad_cascade_df1_init_q15(
+ arm_biquad_casd_df1_inst_q15 * S,
+ uint8_t numStages,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ int8_t postShift);
+
+
+ /**
+ * @brief Fast but less precise processing function for the Q15 Biquad cascade filter for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_fast_q15(
+ const arm_biquad_casd_df1_inst_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 Biquad cascade filter
+ * @param[in] S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_q31(
+ const arm_biquad_casd_df1_inst_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fast but less precise processing function for the Q31 Biquad cascade filter for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_fast_q31(
+ const arm_biquad_casd_df1_inst_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 Biquad cascade filter.
+ * @param[in,out] S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format
+ */
+ void arm_biquad_cascade_df1_init_q31(
+ arm_biquad_casd_df1_inst_q31 * S,
+ uint8_t numStages,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ int8_t postShift);
+
+
+ /**
+ * @brief Processing function for the floating-point Biquad cascade filter.
+ * @param[in] S points to an instance of the floating-point Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_f32(
+ const arm_biquad_casd_df1_inst_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point Biquad cascade filter.
+ * @param[in,out] S points to an instance of the floating-point Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ */
+ void arm_biquad_cascade_df1_init_f32(
+ arm_biquad_casd_df1_inst_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Instance structure for the floating-point matrix structure.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ float32_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_f32;
+
+
+ /**
+ * @brief Instance structure for the floating-point matrix structure.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ float64_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_f64;
+
+ /**
+ * @brief Instance structure for the Q15 matrix structure.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ q15_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 matrix structure.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ q31_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_q31;
+
+
+ /**
+ * @brief Floating-point matrix addition.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_add_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix addition.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_add_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst);
+
+
+ /**
+ * @brief Q31 matrix addition.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_add_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point, complex, matrix multiplication.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_cmplx_mult_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15, complex, matrix multiplication.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_cmplx_mult_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pScratch);
+
+
+ /**
+ * @brief Q31, complex, matrix multiplication.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_cmplx_mult_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix transpose.
+ * @param[in] pSrc points to the input matrix
+ * @param[out] pDst points to the output matrix
+ * @return The function returns either ARM_MATH_SIZE_MISMATCH
+ * or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_trans_f32(
+ const arm_matrix_instance_f32 * pSrc,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix transpose.
+ * @param[in] pSrc points to the input matrix
+ * @param[out] pDst points to the output matrix
+ * @return The function returns either ARM_MATH_SIZE_MISMATCH
+ * or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_trans_q15(
+ const arm_matrix_instance_q15 * pSrc,
+ arm_matrix_instance_q15 * pDst);
+
+
+ /**
+ * @brief Q31 matrix transpose.
+ * @param[in] pSrc points to the input matrix
+ * @param[out] pDst points to the output matrix
+ * @return The function returns either ARM_MATH_SIZE_MISMATCH
+ * or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_trans_q31(
+ const arm_matrix_instance_q31 * pSrc,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix multiplication
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix multiplication
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @param[in] pState points to the array for storing intermediate results
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pState);
+
+
+ /**
+ * @brief Q15 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @param[in] pState points to the array for storing intermediate results
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_fast_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pState);
+
+
+ /**
+ * @brief Q31 matrix multiplication
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Q31 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_fast_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix subtraction
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_sub_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix subtraction
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_sub_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst);
+
+
+ /**
+ * @brief Q31 matrix subtraction
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_sub_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix scaling.
+ * @param[in] pSrc points to the input matrix
+ * @param[in] scale scale factor
+ * @param[out] pDst points to the output matrix
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_scale_f32(
+ const arm_matrix_instance_f32 * pSrc,
+ float32_t scale,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix scaling.
+ * @param[in] pSrc points to input matrix
+ * @param[in] scaleFract fractional portion of the scale factor
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to output matrix
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_scale_q15(
+ const arm_matrix_instance_q15 * pSrc,
+ q15_t scaleFract,
+ int32_t shift,
+ arm_matrix_instance_q15 * pDst);
+
+
+ /**
+ * @brief Q31 matrix scaling.
+ * @param[in] pSrc points to input matrix
+ * @param[in] scaleFract fractional portion of the scale factor
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
+ */
+ arm_status arm_mat_scale_q31(
+ const arm_matrix_instance_q31 * pSrc,
+ q31_t scaleFract,
+ int32_t shift,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Q31 matrix initialization.
+ * @param[in,out] S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] pData points to the matrix data array.
+ */
+ void arm_mat_init_q31(
+ arm_matrix_instance_q31 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ q31_t * pData);
+
+
+ /**
+ * @brief Q15 matrix initialization.
+ * @param[in,out] S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] pData points to the matrix data array.
+ */
+ void arm_mat_init_q15(
+ arm_matrix_instance_q15 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ q15_t * pData);
+
+
+ /**
+ * @brief Floating-point matrix initialization.
+ * @param[in,out] S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] pData points to the matrix data array.
+ */
+ void arm_mat_init_f32(
+ arm_matrix_instance_f32 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ float32_t * pData);
+
+
+
+ /**
+ * @brief Instance structure for the Q15 PID Control.
+ */
+ typedef struct
+ {
+ q15_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+#ifdef ARM_MATH_CM0_FAMILY
+ q15_t A1;
+ q15_t A2;
+#else
+ q31_t A1; /**< The derived gain A1 = -Kp - 2Kd | Kd.*/
+#endif
+ q15_t state[3]; /**< The state array of length 3. */
+ q15_t Kp; /**< The proportional gain. */
+ q15_t Ki; /**< The integral gain. */
+ q15_t Kd; /**< The derivative gain. */
+ } arm_pid_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 PID Control.
+ */
+ typedef struct
+ {
+ q31_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+ q31_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
+ q31_t A2; /**< The derived gain, A2 = Kd . */
+ q31_t state[3]; /**< The state array of length 3. */
+ q31_t Kp; /**< The proportional gain. */
+ q31_t Ki; /**< The integral gain. */
+ q31_t Kd; /**< The derivative gain. */
+ } arm_pid_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point PID Control.
+ */
+ typedef struct
+ {
+ float32_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+ float32_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
+ float32_t A2; /**< The derived gain, A2 = Kd . */
+ float32_t state[3]; /**< The state array of length 3. */
+ float32_t Kp; /**< The proportional gain. */
+ float32_t Ki; /**< The integral gain. */
+ float32_t Kd; /**< The derivative gain. */
+ } arm_pid_instance_f32;
+
+
+
+ /**
+ * @brief Initialization function for the floating-point PID Control.
+ * @param[in,out] S points to an instance of the PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ */
+ void arm_pid_init_f32(
+ arm_pid_instance_f32 * S,
+ int32_t resetStateFlag);
+
+
+ /**
+ * @brief Reset function for the floating-point PID Control.
+ * @param[in,out] S is an instance of the floating-point PID Control structure
+ */
+ void arm_pid_reset_f32(
+ arm_pid_instance_f32 * S);
+
+
+ /**
+ * @brief Initialization function for the Q31 PID Control.
+ * @param[in,out] S points to an instance of the Q15 PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ */
+ void arm_pid_init_q31(
+ arm_pid_instance_q31 * S,
+ int32_t resetStateFlag);
+
+
+ /**
+ * @brief Reset function for the Q31 PID Control.
+ * @param[in,out] S points to an instance of the Q31 PID Control structure
+ */
+
+ void arm_pid_reset_q31(
+ arm_pid_instance_q31 * S);
+
+
+ /**
+ * @brief Initialization function for the Q15 PID Control.
+ * @param[in,out] S points to an instance of the Q15 PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ */
+ void arm_pid_init_q15(
+ arm_pid_instance_q15 * S,
+ int32_t resetStateFlag);
+
+
+ /**
+ * @brief Reset function for the Q15 PID Control.
+ * @param[in,out] S points to an instance of the q15 PID Control structure
+ */
+ void arm_pid_reset_q15(
+ arm_pid_instance_q15 * S);
+
+
+ /**
+ * @brief Instance structure for the floating-point Linear Interpolate function.
+ */
+ typedef struct
+ {
+ uint32_t nValues; /**< nValues */
+ float32_t x1; /**< x1 */
+ float32_t xSpacing; /**< xSpacing */
+ float32_t *pYData; /**< pointer to the table of Y values */
+ } arm_linear_interp_instance_f32;
+
+ /**
+ * @brief Instance structure for the floating-point bilinear interpolation function.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ float32_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_f32;
+
+ /**
+ * @brief Instance structure for the Q31 bilinear interpolation function.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q31_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q31;
+
+ /**
+ * @brief Instance structure for the Q15 bilinear interpolation function.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q15_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q15 bilinear interpolation function.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q7_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q7;
+
+
+ /**
+ * @brief Q7 vector multiplication.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_mult_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q15 vector multiplication.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_mult_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q31 vector multiplication.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_mult_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Floating-point vector multiplication.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_mult_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q15_t *pTwiddle; /**< points to the Sin twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix2_instance_q15;
+
+/* Deprecated */
+ arm_status arm_cfft_radix2_init_q15(
+ arm_cfft_radix2_instance_q15 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix2_q15(
+ const arm_cfft_radix2_instance_q15 * S,
+ q15_t * pSrc);
+
+
+ /**
+ * @brief Instance structure for the Q15 CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q15_t *pTwiddle; /**< points to the twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix4_instance_q15;
+
+/* Deprecated */
+ arm_status arm_cfft_radix4_init_q15(
+ arm_cfft_radix4_instance_q15 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix4_q15(
+ const arm_cfft_radix4_instance_q15 * S,
+ q15_t * pSrc);
+
+ /**
+ * @brief Instance structure for the Radix-2 Q31 CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q31_t *pTwiddle; /**< points to the Twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix2_instance_q31;
+
+/* Deprecated */
+ arm_status arm_cfft_radix2_init_q31(
+ arm_cfft_radix2_instance_q31 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix2_q31(
+ const arm_cfft_radix2_instance_q31 * S,
+ q31_t * pSrc);
+
+ /**
+ * @brief Instance structure for the Q31 CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q31_t *pTwiddle; /**< points to the twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix4_instance_q31;
+
+/* Deprecated */
+ void arm_cfft_radix4_q31(
+ const arm_cfft_radix4_instance_q31 * S,
+ q31_t * pSrc);
+
+/* Deprecated */
+ arm_status arm_cfft_radix4_init_q31(
+ arm_cfft_radix4_instance_q31 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the floating-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ float32_t *pTwiddle; /**< points to the Twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ float32_t onebyfftLen; /**< value of 1/fftLen. */
+ } arm_cfft_radix2_instance_f32;
+
+/* Deprecated */
+ arm_status arm_cfft_radix2_init_f32(
+ arm_cfft_radix2_instance_f32 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix2_f32(
+ const arm_cfft_radix2_instance_f32 * S,
+ float32_t * pSrc);
+
+ /**
+ * @brief Instance structure for the floating-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ float32_t *pTwiddle; /**< points to the Twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ float32_t onebyfftLen; /**< value of 1/fftLen. */
+ } arm_cfft_radix4_instance_f32;
+
+/* Deprecated */
+ arm_status arm_cfft_radix4_init_f32(
+ arm_cfft_radix4_instance_f32 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix4_f32(
+ const arm_cfft_radix4_instance_f32 * S,
+ float32_t * pSrc);
+
+ /**
+ * @brief Instance structure for the fixed-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ const q15_t *pTwiddle; /**< points to the Twiddle factor table. */
+ const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t bitRevLength; /**< bit reversal table length. */
+ } arm_cfft_instance_q15;
+
+void arm_cfft_q15(
+ const arm_cfft_instance_q15 * S,
+ q15_t * p1,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the fixed-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ const q31_t *pTwiddle; /**< points to the Twiddle factor table. */
+ const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t bitRevLength; /**< bit reversal table length. */
+ } arm_cfft_instance_q31;
+
+void arm_cfft_q31(
+ const arm_cfft_instance_q31 * S,
+ q31_t * p1,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the floating-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ const float32_t *pTwiddle; /**< points to the Twiddle factor table. */
+ const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t bitRevLength; /**< bit reversal table length. */
+ } arm_cfft_instance_f32;
+
+ void arm_cfft_f32(
+ const arm_cfft_instance_f32 * S,
+ float32_t * p1,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the Q15 RFFT/RIFFT function.
+ */
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ q15_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ q15_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ const arm_cfft_instance_q15 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_q15;
+
+ arm_status arm_rfft_init_q15(
+ arm_rfft_instance_q15 * S,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ void arm_rfft_q15(
+ const arm_rfft_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst);
+
+ /**
+ * @brief Instance structure for the Q31 RFFT/RIFFT function.
+ */
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ q31_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ q31_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ const arm_cfft_instance_q31 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_q31;
+
+ arm_status arm_rfft_init_q31(
+ arm_rfft_instance_q31 * S,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ void arm_rfft_q31(
+ const arm_rfft_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst);
+
+ /**
+ * @brief Instance structure for the floating-point RFFT/RIFFT function.
+ */
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint16_t fftLenBy2; /**< length of the complex FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ float32_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ float32_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_f32;
+
+ arm_status arm_rfft_init_f32(
+ arm_rfft_instance_f32 * S,
+ arm_cfft_radix4_instance_f32 * S_CFFT,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ void arm_rfft_f32(
+ const arm_rfft_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst);
+
+ /**
+ * @brief Instance structure for the floating-point RFFT/RIFFT function.
+ */
+typedef struct
+ {
+ arm_cfft_instance_f32 Sint; /**< Internal CFFT structure. */
+ uint16_t fftLenRFFT; /**< length of the real sequence */
+ float32_t * pTwiddleRFFT; /**< Twiddle factors real stage */
+ } arm_rfft_fast_instance_f32 ;
+
+arm_status arm_rfft_fast_init_f32 (
+ arm_rfft_fast_instance_f32 * S,
+ uint16_t fftLen);
+
+void arm_rfft_fast_f32(
+ arm_rfft_fast_instance_f32 * S,
+ float32_t * p, float32_t * pOut,
+ uint8_t ifftFlag);
+
+ /**
+ * @brief Instance structure for the floating-point DCT4/IDCT4 function.
+ */
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ float32_t normalize; /**< normalizing factor. */
+ float32_t *pTwiddle; /**< points to the twiddle factor table. */
+ float32_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_f32 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_f32;
+
+
+ /**
+ * @brief Initialization function for the floating-point DCT4/IDCT4.
+ * @param[in,out] S points to an instance of floating-point DCT4/IDCT4 structure.
+ * @param[in] S_RFFT points to an instance of floating-point RFFT/RIFFT structure.
+ * @param[in] S_CFFT points to an instance of floating-point CFFT/CIFFT structure.
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if fftLenReal is not a supported transform length.
+ */
+ arm_status arm_dct4_init_f32(
+ arm_dct4_instance_f32 * S,
+ arm_rfft_instance_f32 * S_RFFT,
+ arm_cfft_radix4_instance_f32 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ float32_t normalize);
+
+
+ /**
+ * @brief Processing function for the floating-point DCT4/IDCT4.
+ * @param[in] S points to an instance of the floating-point DCT4/IDCT4 structure.
+ * @param[in] pState points to state buffer.
+ * @param[in,out] pInlineBuffer points to the in-place input and output buffer.
+ */
+ void arm_dct4_f32(
+ const arm_dct4_instance_f32 * S,
+ float32_t * pState,
+ float32_t * pInlineBuffer);
+
+
+ /**
+ * @brief Instance structure for the Q31 DCT4/IDCT4 function.
+ */
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ q31_t normalize; /**< normalizing factor. */
+ q31_t *pTwiddle; /**< points to the twiddle factor table. */
+ q31_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_q31 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_q31;
+
+
+ /**
+ * @brief Initialization function for the Q31 DCT4/IDCT4.
+ * @param[in,out] S points to an instance of Q31 DCT4/IDCT4 structure.
+ * @param[in] S_RFFT points to an instance of Q31 RFFT/RIFFT structure
+ * @param[in] S_CFFT points to an instance of Q31 CFFT/CIFFT structure
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N is not a supported transform length.
+ */
+ arm_status arm_dct4_init_q31(
+ arm_dct4_instance_q31 * S,
+ arm_rfft_instance_q31 * S_RFFT,
+ arm_cfft_radix4_instance_q31 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ q31_t normalize);
+
+
+ /**
+ * @brief Processing function for the Q31 DCT4/IDCT4.
+ * @param[in] S points to an instance of the Q31 DCT4 structure.
+ * @param[in] pState points to state buffer.
+ * @param[in,out] pInlineBuffer points to the in-place input and output buffer.
+ */
+ void arm_dct4_q31(
+ const arm_dct4_instance_q31 * S,
+ q31_t * pState,
+ q31_t * pInlineBuffer);
+
+
+ /**
+ * @brief Instance structure for the Q15 DCT4/IDCT4 function.
+ */
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ q15_t normalize; /**< normalizing factor. */
+ q15_t *pTwiddle; /**< points to the twiddle factor table. */
+ q15_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_q15 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_q15;
+
+
+ /**
+ * @brief Initialization function for the Q15 DCT4/IDCT4.
+ * @param[in,out] S points to an instance of Q15 DCT4/IDCT4 structure.
+ * @param[in] S_RFFT points to an instance of Q15 RFFT/RIFFT structure.
+ * @param[in] S_CFFT points to an instance of Q15 CFFT/CIFFT structure.
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N is not a supported transform length.
+ */
+ arm_status arm_dct4_init_q15(
+ arm_dct4_instance_q15 * S,
+ arm_rfft_instance_q15 * S_RFFT,
+ arm_cfft_radix4_instance_q15 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ q15_t normalize);
+
+
+ /**
+ * @brief Processing function for the Q15 DCT4/IDCT4.
+ * @param[in] S points to an instance of the Q15 DCT4 structure.
+ * @param[in] pState points to state buffer.
+ * @param[in,out] pInlineBuffer points to the in-place input and output buffer.
+ */
+ void arm_dct4_q15(
+ const arm_dct4_instance_q15 * S,
+ q15_t * pState,
+ q15_t * pInlineBuffer);
+
+
+ /**
+ * @brief Floating-point vector addition.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_add_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q7 vector addition.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_add_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q15 vector addition.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_add_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q31 vector addition.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_add_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Floating-point vector subtraction.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_sub_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q7 vector subtraction.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_sub_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q15 vector subtraction.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_sub_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q31 vector subtraction.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_sub_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Multiplies a floating-point vector by a scalar.
+ * @param[in] pSrc points to the input vector
+ * @param[in] scale scale factor to be applied
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_scale_f32(
+ float32_t * pSrc,
+ float32_t scale,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Multiplies a Q7 vector by a scalar.
+ * @param[in] pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_scale_q7(
+ q7_t * pSrc,
+ q7_t scaleFract,
+ int8_t shift,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Multiplies a Q15 vector by a scalar.
+ * @param[in] pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_scale_q15(
+ q15_t * pSrc,
+ q15_t scaleFract,
+ int8_t shift,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Multiplies a Q31 vector by a scalar.
+ * @param[in] pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_scale_q31(
+ q31_t * pSrc,
+ q31_t scaleFract,
+ int8_t shift,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q7 vector absolute value.
+ * @param[in] pSrc points to the input buffer
+ * @param[out] pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_abs_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Floating-point vector absolute value.
+ * @param[in] pSrc points to the input buffer
+ * @param[out] pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_abs_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q15 vector absolute value.
+ * @param[in] pSrc points to the input buffer
+ * @param[out] pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_abs_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q31 vector absolute value.
+ * @param[in] pSrc points to the input buffer
+ * @param[out] pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_abs_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Dot product of floating-point vectors.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] result output result returned here
+ */
+ void arm_dot_prod_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ uint32_t blockSize,
+ float32_t * result);
+
+
+ /**
+ * @brief Dot product of Q7 vectors.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] result output result returned here
+ */
+ void arm_dot_prod_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ uint32_t blockSize,
+ q31_t * result);
+
+
+ /**
+ * @brief Dot product of Q15 vectors.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] result output result returned here
+ */
+ void arm_dot_prod_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ uint32_t blockSize,
+ q63_t * result);
+
+
+ /**
+ * @brief Dot product of Q31 vectors.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] result output result returned here
+ */
+ void arm_dot_prod_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ uint32_t blockSize,
+ q63_t * result);
+
+
+ /**
+ * @brief Shifts the elements of a Q7 vector a specified number of bits.
+ * @param[in] pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_shift_q7(
+ q7_t * pSrc,
+ int8_t shiftBits,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Shifts the elements of a Q15 vector a specified number of bits.
+ * @param[in] pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_shift_q15(
+ q15_t * pSrc,
+ int8_t shiftBits,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Shifts the elements of a Q31 vector a specified number of bits.
+ * @param[in] pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_shift_q31(
+ q31_t * pSrc,
+ int8_t shiftBits,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Adds a constant offset to a floating-point vector.
+ * @param[in] pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_offset_f32(
+ float32_t * pSrc,
+ float32_t offset,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Adds a constant offset to a Q7 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_offset_q7(
+ q7_t * pSrc,
+ q7_t offset,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Adds a constant offset to a Q15 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_offset_q15(
+ q15_t * pSrc,
+ q15_t offset,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Adds a constant offset to a Q31 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_offset_q31(
+ q31_t * pSrc,
+ q31_t offset,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Negates the elements of a floating-point vector.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_negate_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Negates the elements of a Q7 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_negate_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Negates the elements of a Q15 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_negate_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Negates the elements of a Q31 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_negate_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Copies the elements of a floating-point vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_copy_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Copies the elements of a Q7 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_copy_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Copies the elements of a Q15 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_copy_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Copies the elements of a Q31 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_copy_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fills a constant value into a floating-point vector.
+ * @param[in] value input value to be filled
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_fill_f32(
+ float32_t value,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fills a constant value into a Q7 vector.
+ * @param[in] value input value to be filled
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_fill_q7(
+ q7_t value,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fills a constant value into a Q15 vector.
+ * @param[in] value input value to be filled
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_fill_q15(
+ q15_t value,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fills a constant value into a Q31 vector.
+ * @param[in] value input value to be filled
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_fill_q31(
+ q31_t value,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+/**
+ * @brief Convolution of floating-point sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the location where the output result is written. Length srcALen+srcBLen-1.
+ */
+ void arm_conv_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ */
+ void arm_conv_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+/**
+ * @brief Convolution of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the location where the output result is written. Length srcALen+srcBLen-1.
+ */
+ void arm_conv_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ */
+ void arm_conv_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ */
+ void arm_conv_fast_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Convolution of Q31 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ */
+ void arm_conv_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ */
+ void arm_conv_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+ */
+ void arm_conv_opt_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Convolution of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ */
+ void arm_conv_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst);
+
+
+ /**
+ * @brief Partial convolution of floating-point sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Partial convolution of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_fast_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Partial convolution of Q31 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q7 sequences
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_opt_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+/**
+ * @brief Partial convolution of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR decimator.
+ */
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ } arm_fir_decimate_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR decimator.
+ */
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ } arm_fir_decimate_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR decimator.
+ */
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ } arm_fir_decimate_instance_f32;
+
+
+ /**
+ * @brief Processing function for the floating-point FIR decimator.
+ * @param[in] S points to an instance of the floating-point FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_f32(
+ const arm_fir_decimate_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point FIR decimator.
+ * @param[in,out] S points to an instance of the floating-point FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * blockSize is not a multiple of M.
+ */
+ arm_status arm_fir_decimate_init_f32(
+ arm_fir_decimate_instance_f32 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR decimator.
+ * @param[in] S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_q15(
+ const arm_fir_decimate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_fast_q15(
+ const arm_fir_decimate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR decimator.
+ * @param[in,out] S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * blockSize is not a multiple of M.
+ */
+ arm_status arm_fir_decimate_init_q15(
+ arm_fir_decimate_instance_q15 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 FIR decimator.
+ * @param[in] S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_q31(
+ const arm_fir_decimate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q31 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_fast_q31(
+ arm_fir_decimate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 FIR decimator.
+ * @param[in,out] S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * blockSize is not a multiple of M.
+ */
+ arm_status arm_fir_decimate_init_q31(
+ arm_fir_decimate_instance_q31 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR interpolator.
+ */
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ q15_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
+ } arm_fir_interpolate_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR interpolator.
+ */
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ q31_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
+ } arm_fir_interpolate_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR interpolator.
+ */
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ float32_t *pState; /**< points to the state variable array. The array is of length phaseLength+numTaps-1. */
+ } arm_fir_interpolate_instance_f32;
+
+
+ /**
+ * @brief Processing function for the Q15 FIR interpolator.
+ * @param[in] S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_interpolate_q15(
+ const arm_fir_interpolate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR interpolator.
+ * @param[in,out] S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficient buffer.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length numTaps is not a multiple of the interpolation factor L.
+ */
+ arm_status arm_fir_interpolate_init_q15(
+ arm_fir_interpolate_instance_q15 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 FIR interpolator.
+ * @param[in] S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_interpolate_q31(
+ const arm_fir_interpolate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 FIR interpolator.
+ * @param[in,out] S points to an instance of the Q31 FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficient buffer.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length numTaps is not a multiple of the interpolation factor L.
+ */
+ arm_status arm_fir_interpolate_init_q31(
+ arm_fir_interpolate_instance_q31 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point FIR interpolator.
+ * @param[in] S points to an instance of the floating-point FIR interpolator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_interpolate_f32(
+ const arm_fir_interpolate_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point FIR interpolator.
+ * @param[in,out] S points to an instance of the floating-point FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficient buffer.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length numTaps is not a multiple of the interpolation factor L.
+ */
+ arm_status arm_fir_interpolate_init_f32(
+ arm_fir_interpolate_instance_f32 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the high precision Q31 Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q63_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */
+ q31_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ uint8_t postShift; /**< additional shift, in bits, applied to each output sample. */
+ } arm_biquad_cas_df1_32x64_ins_q31;
+
+
+ /**
+ * @param[in] S points to an instance of the high precision Q31 Biquad cascade filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cas_df1_32x64_q31(
+ const arm_biquad_cas_df1_32x64_ins_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @param[in,out] S points to an instance of the high precision Q31 Biquad cascade filter structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] postShift shift to be applied to the output. Varies according to the coefficients format
+ */
+ void arm_biquad_cas_df1_32x64_init_q31(
+ arm_biquad_cas_df1_32x64_ins_q31 * S,
+ uint8_t numStages,
+ q31_t * pCoeffs,
+ q63_t * pState,
+ uint8_t postShift);
+
+
+ /**
+ * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */
+ float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_cascade_df2T_instance_f32;
+
+ /**
+ * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */
+ float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_cascade_stereo_df2T_instance_f32;
+
+ /**
+ * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float64_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */
+ float64_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_cascade_df2T_instance_f64;
+
+
+ /**
+ * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in] S points to an instance of the filter data structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df2T_f32(
+ const arm_biquad_cascade_df2T_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. 2 channels
+ * @param[in] S points to an instance of the filter data structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_stereo_df2T_f32(
+ const arm_biquad_cascade_stereo_df2T_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in] S points to an instance of the filter data structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df2T_f64(
+ const arm_biquad_cascade_df2T_instance_f64 * S,
+ float64_t * pSrc,
+ float64_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in,out] S points to an instance of the filter data structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ */
+ void arm_biquad_cascade_df2T_init_f32(
+ arm_biquad_cascade_df2T_instance_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in,out] S points to an instance of the filter data structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ */
+ void arm_biquad_cascade_stereo_df2T_init_f32(
+ arm_biquad_cascade_stereo_df2T_instance_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in,out] S points to an instance of the filter data structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ */
+ void arm_biquad_cascade_df2T_init_f64(
+ arm_biquad_cascade_df2T_instance_f64 * S,
+ uint8_t numStages,
+ float64_t * pCoeffs,
+ float64_t * pState);
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_f32;
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR lattice filter.
+ * @param[in] S points to an instance of the Q15 FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] pState points to the state buffer. The array is of length numStages.
+ */
+ void arm_fir_lattice_init_q15(
+ arm_fir_lattice_instance_q15 * S,
+ uint16_t numStages,
+ q15_t * pCoeffs,
+ q15_t * pState);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR lattice filter.
+ * @param[in] S points to an instance of the Q15 FIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_lattice_q15(
+ const arm_fir_lattice_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 FIR lattice filter.
+ * @param[in] S points to an instance of the Q31 FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] pState points to the state buffer. The array is of length numStages.
+ */
+ void arm_fir_lattice_init_q31(
+ arm_fir_lattice_instance_q31 * S,
+ uint16_t numStages,
+ q31_t * pCoeffs,
+ q31_t * pState);
+
+
+ /**
+ * @brief Processing function for the Q31 FIR lattice filter.
+ * @param[in] S points to an instance of the Q31 FIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_lattice_q31(
+ const arm_fir_lattice_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+/**
+ * @brief Initialization function for the floating-point FIR lattice filter.
+ * @param[in] S points to an instance of the floating-point FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] pState points to the state buffer. The array is of length numStages.
+ */
+ void arm_fir_lattice_init_f32(
+ arm_fir_lattice_instance_f32 * S,
+ uint16_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Processing function for the floating-point FIR lattice filter.
+ * @param[in] S points to an instance of the floating-point FIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_lattice_f32(
+ const arm_fir_lattice_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ q15_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ q15_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ q31_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ q31_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ float32_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ float32_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_f32;
+
+
+ /**
+ * @brief Processing function for the floating-point IIR lattice filter.
+ * @param[in] S points to an instance of the floating-point IIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_f32(
+ const arm_iir_lattice_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point IIR lattice filter.
+ * @param[in] S points to an instance of the floating-point IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] pkCoeffs points to the reflection coefficient buffer. The array is of length numStages.
+ * @param[in] pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] pState points to the state buffer. The array is of length numStages+blockSize-1.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_init_f32(
+ arm_iir_lattice_instance_f32 * S,
+ uint16_t numStages,
+ float32_t * pkCoeffs,
+ float32_t * pvCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 IIR lattice filter.
+ * @param[in] S points to an instance of the Q31 IIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_q31(
+ const arm_iir_lattice_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 IIR lattice filter.
+ * @param[in] S points to an instance of the Q31 IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] pkCoeffs points to the reflection coefficient buffer. The array is of length numStages.
+ * @param[in] pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] pState points to the state buffer. The array is of length numStages+blockSize.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_init_q31(
+ arm_iir_lattice_instance_q31 * S,
+ uint16_t numStages,
+ q31_t * pkCoeffs,
+ q31_t * pvCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 IIR lattice filter.
+ * @param[in] S points to an instance of the Q15 IIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_q15(
+ const arm_iir_lattice_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+/**
+ * @brief Initialization function for the Q15 IIR lattice filter.
+ * @param[in] S points to an instance of the fixed-point Q15 IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] pkCoeffs points to reflection coefficient buffer. The array is of length numStages.
+ * @param[in] pvCoeffs points to ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] pState points to state buffer. The array is of length numStages+blockSize.
+ * @param[in] blockSize number of samples to process per call.
+ */
+ void arm_iir_lattice_init_q15(
+ arm_iir_lattice_instance_q15 * S,
+ uint16_t numStages,
+ q15_t * pkCoeffs,
+ q15_t * pvCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the floating-point LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ float32_t mu; /**< step size that controls filter coefficient updates. */
+ } arm_lms_instance_f32;
+
+
+ /**
+ * @brief Processing function for floating-point LMS filter.
+ * @param[in] S points to an instance of the floating-point LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_f32(
+ const arm_lms_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pRef,
+ float32_t * pOut,
+ float32_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for floating-point LMS filter.
+ * @param[in] S points to an instance of the floating-point LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to the coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_init_f32(
+ arm_lms_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ float32_t mu,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q15_t mu; /**< step size that controls filter coefficient updates. */
+ uint32_t postShift; /**< bit shift applied to coefficients. */
+ } arm_lms_instance_q15;
+
+
+ /**
+ * @brief Initialization function for the Q15 LMS filter.
+ * @param[in] S points to an instance of the Q15 LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to the coefficient buffer.
+ * @param[in] pState points to the state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ */
+ void arm_lms_init_q15(
+ arm_lms_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ q15_t mu,
+ uint32_t blockSize,
+ uint32_t postShift);
+
+
+ /**
+ * @brief Processing function for Q15 LMS filter.
+ * @param[in] S points to an instance of the Q15 LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_q15(
+ const arm_lms_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pRef,
+ q15_t * pOut,
+ q15_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q31 LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q31_t mu; /**< step size that controls filter coefficient updates. */
+ uint32_t postShift; /**< bit shift applied to coefficients. */
+ } arm_lms_instance_q31;
+
+
+ /**
+ * @brief Processing function for Q31 LMS filter.
+ * @param[in] S points to an instance of the Q15 LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_q31(
+ const arm_lms_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pRef,
+ q31_t * pOut,
+ q31_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for Q31 LMS filter.
+ * @param[in] S points to an instance of the Q31 LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ */
+ void arm_lms_init_q31(
+ arm_lms_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ q31_t mu,
+ uint32_t blockSize,
+ uint32_t postShift);
+
+
+ /**
+ * @brief Instance structure for the floating-point normalized LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ float32_t mu; /**< step size that control filter coefficient updates. */
+ float32_t energy; /**< saves previous frame energy. */
+ float32_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_f32;
+
+
+ /**
+ * @brief Processing function for floating-point normalized LMS filter.
+ * @param[in] S points to an instance of the floating-point normalized LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_norm_f32(
+ arm_lms_norm_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pRef,
+ float32_t * pOut,
+ float32_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for floating-point normalized LMS filter.
+ * @param[in] S points to an instance of the floating-point LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_norm_init_f32(
+ arm_lms_norm_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ float32_t mu,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q31 normalized LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q31_t mu; /**< step size that controls filter coefficient updates. */
+ uint8_t postShift; /**< bit shift applied to coefficients. */
+ q31_t *recipTable; /**< points to the reciprocal initial value table. */
+ q31_t energy; /**< saves previous frame energy. */
+ q31_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_q31;
+
+
+ /**
+ * @brief Processing function for Q31 normalized LMS filter.
+ * @param[in] S points to an instance of the Q31 normalized LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_norm_q31(
+ arm_lms_norm_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pRef,
+ q31_t * pOut,
+ q31_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for Q31 normalized LMS filter.
+ * @param[in] S points to an instance of the Q31 normalized LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ */
+ void arm_lms_norm_init_q31(
+ arm_lms_norm_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ q31_t mu,
+ uint32_t blockSize,
+ uint8_t postShift);
+
+
+ /**
+ * @brief Instance structure for the Q15 normalized LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< Number of coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q15_t mu; /**< step size that controls filter coefficient updates. */
+ uint8_t postShift; /**< bit shift applied to coefficients. */
+ q15_t *recipTable; /**< Points to the reciprocal initial value table. */
+ q15_t energy; /**< saves previous frame energy. */
+ q15_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_q15;
+
+
+ /**
+ * @brief Processing function for Q15 normalized LMS filter.
+ * @param[in] S points to an instance of the Q15 normalized LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_norm_q15(
+ arm_lms_norm_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pRef,
+ q15_t * pOut,
+ q15_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for Q15 normalized LMS filter.
+ * @param[in] S points to an instance of the Q15 normalized LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ */
+ void arm_lms_norm_init_q15(
+ arm_lms_norm_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ q15_t mu,
+ uint32_t blockSize,
+ uint8_t postShift);
+
+
+ /**
+ * @brief Correlation of floating-point sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+ void arm_correlate_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q15 sequences
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @param[in] pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ */
+ void arm_correlate_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch);
+
+
+ /**
+ * @brief Correlation of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+
+ void arm_correlate_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+
+ void arm_correlate_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @param[in] pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ */
+ void arm_correlate_fast_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch);
+
+
+ /**
+ * @brief Correlation of Q31 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+ void arm_correlate_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+ void arm_correlate_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+ */
+ void arm_correlate_opt_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Correlation of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+ void arm_correlate_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst);
+
+
+ /**
+ * @brief Instance structure for the floating-point sparse FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ float32_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_f32;
+
+ /**
+ * @brief Instance structure for the Q31 sparse FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q31_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q31;
+
+ /**
+ * @brief Instance structure for the Q15 sparse FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q15_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q7 sparse FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q7_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q7;
+
+
+ /**
+ * @brief Processing function for the floating-point sparse FIR filter.
+ * @param[in] S points to an instance of the floating-point sparse FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_sparse_f32(
+ arm_fir_sparse_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ float32_t * pScratchIn,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point sparse FIR filter.
+ * @param[in,out] S points to an instance of the floating-point sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] pCoeffs points to the array of filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ */
+ void arm_fir_sparse_init_f32(
+ arm_fir_sparse_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 sparse FIR filter.
+ * @param[in] S points to an instance of the Q31 sparse FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_sparse_q31(
+ arm_fir_sparse_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ q31_t * pScratchIn,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 sparse FIR filter.
+ * @param[in,out] S points to an instance of the Q31 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] pCoeffs points to the array of filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ */
+ void arm_fir_sparse_init_q31(
+ arm_fir_sparse_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 sparse FIR filter.
+ * @param[in] S points to an instance of the Q15 sparse FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] pScratchOut points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_sparse_q15(
+ arm_fir_sparse_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ q15_t * pScratchIn,
+ q31_t * pScratchOut,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 sparse FIR filter.
+ * @param[in,out] S points to an instance of the Q15 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] pCoeffs points to the array of filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ */
+ void arm_fir_sparse_init_q15(
+ arm_fir_sparse_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q7 sparse FIR filter.
+ * @param[in] S points to an instance of the Q7 sparse FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] pScratchOut points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_sparse_q7(
+ arm_fir_sparse_instance_q7 * S,
+ q7_t * pSrc,
+ q7_t * pDst,
+ q7_t * pScratchIn,
+ q31_t * pScratchOut,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q7 sparse FIR filter.
+ * @param[in,out] S points to an instance of the Q7 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] pCoeffs points to the array of filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ */
+ void arm_fir_sparse_init_q7(
+ arm_fir_sparse_instance_q7 * S,
+ uint16_t numTaps,
+ q7_t * pCoeffs,
+ q7_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Floating-point sin_cos function.
+ * @param[in] theta input value in degrees
+ * @param[out] pSinVal points to the processed sine output.
+ * @param[out] pCosVal points to the processed cos output.
+ */
+ void arm_sin_cos_f32(
+ float32_t theta,
+ float32_t * pSinVal,
+ float32_t * pCosVal);
+
+
+ /**
+ * @brief Q31 sin_cos function.
+ * @param[in] theta scaled input value in degrees
+ * @param[out] pSinVal points to the processed sine output.
+ * @param[out] pCosVal points to the processed cosine output.
+ */
+ void arm_sin_cos_q31(
+ q31_t theta,
+ q31_t * pSinVal,
+ q31_t * pCosVal);
+
+
+ /**
+ * @brief Floating-point complex conjugate.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_conj_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q31 complex conjugate.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_conj_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q15 complex conjugate.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_conj_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Floating-point complex magnitude squared
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_squared_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q31 complex magnitude squared
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_squared_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q15 complex magnitude squared
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_squared_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup PID PID Motor Control
+ *
+ * A Proportional Integral Derivative (PID) controller is a generic feedback control
+ * loop mechanism widely used in industrial control systems.
+ * A PID controller is the most commonly used type of feedback controller.
+ *
+ * This set of functions implements (PID) controllers
+ * for Q15, Q31, and floating-point data types. The functions operate on a single sample
+ * of data and each call to the function returns a single processed value.
+ * S points to an instance of the PID control data structure. in
+ * is the input sample value. The functions return the output value.
+ *
+ * \par Algorithm:
+ *
+ * y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2]
+ * A0 = Kp + Ki + Kd
+ * A1 = (-Kp ) - (2 * Kd )
+ * A2 = Kd
+ *
+ * \par
+ * where \c Kp is proportional constant, \c Ki is Integral constant and \c Kd is Derivative constant
+ *
+ * \par
+ * \image html PID.gif "Proportional Integral Derivative Controller"
+ *
+ * \par
+ * The PID controller calculates an "error" value as the difference between
+ * the measured output and the reference input.
+ * The controller attempts to minimize the error by adjusting the process control inputs.
+ * The proportional value determines the reaction to the current error,
+ * the integral value determines the reaction based on the sum of recent errors,
+ * and the derivative value determines the reaction based on the rate at which the error has been changing.
+ *
+ * \par Instance Structure
+ * The Gains A0, A1, A2 and state variables for a PID controller are stored together in an instance data structure.
+ * A separate instance structure must be defined for each PID Controller.
+ * There are separate instance structure declarations for each of the 3 supported data types.
+ *
+ * \par Reset Functions
+ * There is also an associated reset function for each data type which clears the state array.
+ *
+ * \par Initialization Functions
+ * There is also an associated initialization function for each data type.
+ * The initialization function performs the following operations:
+ * - Initializes the Gains A0, A1, A2 from Kp,Ki, Kd gains.
+ * - Zeros out the values in the state buffer.
+ *
+ * \par
+ * Instance structure cannot be placed into a const data section and it is recommended to use the initialization function.
+ *
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the fixed-point versions of the PID Controller functions.
+ * In particular, the overflow and saturation behavior of the accumulator used in each function must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup PID
+ * @{
+ */
+
+ /**
+ * @brief Process function for the floating-point PID Control.
+ * @param[in,out] S is an instance of the floating-point PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ */
+ static __INLINE float32_t arm_pid_f32(
+ arm_pid_instance_f32 * S,
+ float32_t in)
+ {
+ float32_t out;
+
+ /* y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2] */
+ out = (S->A0 * in) +
+ (S->A1 * S->state[0]) + (S->A2 * S->state[1]) + (S->state[2]);
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+
+ }
+
+ /**
+ * @brief Process function for the Q31 PID Control.
+ * @param[in,out] S points to an instance of the Q31 PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 64-bit accumulator.
+ * The accumulator has a 2.62 format and maintains full precision of the intermediate multiplication results but provides only a single guard bit.
+ * Thus, if the accumulator result overflows it wraps around rather than clip.
+ * In order to avoid overflows completely the input signal must be scaled down by 2 bits as there are four additions.
+ * After all multiply-accumulates are performed, the 2.62 accumulator is truncated to 1.32 format and then saturated to 1.31 format.
+ */
+ static __INLINE q31_t arm_pid_q31(
+ arm_pid_instance_q31 * S,
+ q31_t in)
+ {
+ q63_t acc;
+ q31_t out;
+
+ /* acc = A0 * x[n] */
+ acc = (q63_t) S->A0 * in;
+
+ /* acc += A1 * x[n-1] */
+ acc += (q63_t) S->A1 * S->state[0];
+
+ /* acc += A2 * x[n-2] */
+ acc += (q63_t) S->A2 * S->state[1];
+
+ /* convert output to 1.31 format to add y[n-1] */
+ out = (q31_t) (acc >> 31u);
+
+ /* out += y[n-1] */
+ out += S->state[2];
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+ }
+
+
+ /**
+ * @brief Process function for the Q15 PID Control.
+ * @param[in,out] S points to an instance of the Q15 PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using a 64-bit internal accumulator.
+ * Both Gains and state variables are represented in 1.15 format and multiplications yield a 2.30 result.
+ * The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format.
+ * There is no risk of internal overflow with this approach and the full precision of intermediate multiplications is preserved.
+ * After all additions have been performed, the accumulator is truncated to 34.15 format by discarding low 15 bits.
+ * Lastly, the accumulator is saturated to yield a result in 1.15 format.
+ */
+ static __INLINE q15_t arm_pid_q15(
+ arm_pid_instance_q15 * S,
+ q15_t in)
+ {
+ q63_t acc;
+ q15_t out;
+
+#ifndef ARM_MATH_CM0_FAMILY
+ __SIMD32_TYPE *vstate;
+
+ /* Implementation of PID controller */
+
+ /* acc = A0 * x[n] */
+ acc = (q31_t) __SMUAD((uint32_t)S->A0, (uint32_t)in);
+
+ /* acc += A1 * x[n-1] + A2 * x[n-2] */
+ vstate = __SIMD32_CONST(S->state);
+ acc = (q63_t)__SMLALD((uint32_t)S->A1, (uint32_t)*vstate, (uint64_t)acc);
+#else
+ /* acc = A0 * x[n] */
+ acc = ((q31_t) S->A0) * in;
+
+ /* acc += A1 * x[n-1] + A2 * x[n-2] */
+ acc += (q31_t) S->A1 * S->state[0];
+ acc += (q31_t) S->A2 * S->state[1];
+#endif
+
+ /* acc += y[n-1] */
+ acc += (q31_t) S->state[2] << 15;
+
+ /* saturate the output */
+ out = (q15_t) (__SSAT((acc >> 15), 16));
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+ }
+
+ /**
+ * @} end of PID group
+ */
+
+
+ /**
+ * @brief Floating-point matrix inverse.
+ * @param[in] src points to the instance of the input floating-point matrix structure.
+ * @param[out] dst points to the instance of the output floating-point matrix structure.
+ * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
+ * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
+ */
+ arm_status arm_mat_inverse_f32(
+ const arm_matrix_instance_f32 * src,
+ arm_matrix_instance_f32 * dst);
+
+
+ /**
+ * @brief Floating-point matrix inverse.
+ * @param[in] src points to the instance of the input floating-point matrix structure.
+ * @param[out] dst points to the instance of the output floating-point matrix structure.
+ * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
+ * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
+ */
+ arm_status arm_mat_inverse_f64(
+ const arm_matrix_instance_f64 * src,
+ arm_matrix_instance_f64 * dst);
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup clarke Vector Clarke Transform
+ * Forward Clarke transform converts the instantaneous stator phases into a two-coordinate time invariant vector.
+ * Generally the Clarke transform uses three-phase currents Ia, Ib and Ic to calculate currents
+ * in the two-phase orthogonal stator axis Ialpha and Ibeta.
+ * When Ialpha is superposed with Ia as shown in the figure below
+ * \image html clarke.gif Stator current space vector and its components in (a,b).
+ * and Ia + Ib + Ic = 0, in this condition Ialpha and Ibeta
+ * can be calculated using only Ia and Ib.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html clarkeFormula.gif
+ * where Ia and Ib are the instantaneous stator phases and
+ * pIalpha and pIbeta are the two coordinates of time invariant vector.
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Clarke transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup clarke
+ * @{
+ */
+
+ /**
+ *
+ * @brief Floating-point Clarke transform
+ * @param[in] Ia input three-phase coordinate a
+ * @param[in] Ib input three-phase coordinate b
+ * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
+ */
+ static __INLINE void arm_clarke_f32(
+ float32_t Ia,
+ float32_t Ib,
+ float32_t * pIalpha,
+ float32_t * pIbeta)
+ {
+ /* Calculate pIalpha using the equation, pIalpha = Ia */
+ *pIalpha = Ia;
+
+ /* Calculate pIbeta using the equation, pIbeta = (1/sqrt(3)) * Ia + (2/sqrt(3)) * Ib */
+ *pIbeta = ((float32_t) 0.57735026919 * Ia + (float32_t) 1.15470053838 * Ib);
+ }
+
+
+ /**
+ * @brief Clarke transform for Q31 version
+ * @param[in] Ia input three-phase coordinate a
+ * @param[in] Ib input three-phase coordinate b
+ * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition, hence there is no risk of overflow.
+ */
+ static __INLINE void arm_clarke_q31(
+ q31_t Ia,
+ q31_t Ib,
+ q31_t * pIalpha,
+ q31_t * pIbeta)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+
+ /* Calculating pIalpha from Ia by equation pIalpha = Ia */
+ *pIalpha = Ia;
+
+ /* Intermediate product is calculated by (1/(sqrt(3)) * Ia) */
+ product1 = (q31_t) (((q63_t) Ia * 0x24F34E8B) >> 30);
+
+ /* Intermediate product is calculated by (2/sqrt(3) * Ib) */
+ product2 = (q31_t) (((q63_t) Ib * 0x49E69D16) >> 30);
+
+ /* pIbeta is calculated by adding the intermediate products */
+ *pIbeta = __QADD(product1, product2);
+ }
+
+ /**
+ * @} end of clarke group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to Q31 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_q7_to_q31(
+ q7_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup inv_clarke Vector Inverse Clarke Transform
+ * Inverse Clarke transform converts the two-coordinate time invariant vector into instantaneous stator phases.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html clarkeInvFormula.gif
+ * where pIa and pIb are the instantaneous stator phases and
+ * Ialpha and Ibeta are the two coordinates of time invariant vector.
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Clarke transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup inv_clarke
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Inverse Clarke transform
+ * @param[in] Ialpha input two-phase orthogonal vector axis alpha
+ * @param[in] Ibeta input two-phase orthogonal vector axis beta
+ * @param[out] pIa points to output three-phase coordinate a
+ * @param[out] pIb points to output three-phase coordinate b
+ */
+ static __INLINE void arm_inv_clarke_f32(
+ float32_t Ialpha,
+ float32_t Ibeta,
+ float32_t * pIa,
+ float32_t * pIb)
+ {
+ /* Calculating pIa from Ialpha by equation pIa = Ialpha */
+ *pIa = Ialpha;
+
+ /* Calculating pIb from Ialpha and Ibeta by equation pIb = -(1/2) * Ialpha + (sqrt(3)/2) * Ibeta */
+ *pIb = -0.5f * Ialpha + 0.8660254039f * Ibeta;
+ }
+
+
+ /**
+ * @brief Inverse Clarke transform for Q31 version
+ * @param[in] Ialpha input two-phase orthogonal vector axis alpha
+ * @param[in] Ibeta input two-phase orthogonal vector axis beta
+ * @param[out] pIa points to output three-phase coordinate a
+ * @param[out] pIb points to output three-phase coordinate b
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the subtraction, hence there is no risk of overflow.
+ */
+ static __INLINE void arm_inv_clarke_q31(
+ q31_t Ialpha,
+ q31_t Ibeta,
+ q31_t * pIa,
+ q31_t * pIb)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+
+ /* Calculating pIa from Ialpha by equation pIa = Ialpha */
+ *pIa = Ialpha;
+
+ /* Intermediate product is calculated by (1/(2*sqrt(3)) * Ia) */
+ product1 = (q31_t) (((q63_t) (Ialpha) * (0x40000000)) >> 31);
+
+ /* Intermediate product is calculated by (1/sqrt(3) * pIb) */
+ product2 = (q31_t) (((q63_t) (Ibeta) * (0x6ED9EBA1)) >> 31);
+
+ /* pIb is calculated by subtracting the products */
+ *pIb = __QSUB(product2, product1);
+ }
+
+ /**
+ * @} end of inv_clarke group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to Q15 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_q7_to_q15(
+ q7_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup park Vector Park Transform
+ *
+ * Forward Park transform converts the input two-coordinate vector to flux and torque components.
+ * The Park transform can be used to realize the transformation of the Ialpha and the Ibeta currents
+ * from the stationary to the moving reference frame and control the spatial relationship between
+ * the stator vector current and rotor flux vector.
+ * If we consider the d axis aligned with the rotor flux, the diagram below shows the
+ * current vector and the relationship from the two reference frames:
+ * \image html park.gif "Stator current space vector and its component in (a,b) and in the d,q rotating reference frame"
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html parkFormula.gif
+ * where Ialpha and Ibeta are the stator vector components,
+ * pId and pIq are rotor vector components and cosVal and sinVal are the
+ * cosine and sine values of theta (rotor flux position).
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Park transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup park
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Park transform
+ * @param[in] Ialpha input two-phase vector coordinate alpha
+ * @param[in] Ibeta input two-phase vector coordinate beta
+ * @param[out] pId points to output rotor reference frame d
+ * @param[out] pIq points to output rotor reference frame q
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ *
+ * The function implements the forward Park transform.
+ *
+ */
+ static __INLINE void arm_park_f32(
+ float32_t Ialpha,
+ float32_t Ibeta,
+ float32_t * pId,
+ float32_t * pIq,
+ float32_t sinVal,
+ float32_t cosVal)
+ {
+ /* Calculate pId using the equation, pId = Ialpha * cosVal + Ibeta * sinVal */
+ *pId = Ialpha * cosVal + Ibeta * sinVal;
+
+ /* Calculate pIq using the equation, pIq = - Ialpha * sinVal + Ibeta * cosVal */
+ *pIq = -Ialpha * sinVal + Ibeta * cosVal;
+ }
+
+
+ /**
+ * @brief Park transform for Q31 version
+ * @param[in] Ialpha input two-phase vector coordinate alpha
+ * @param[in] Ibeta input two-phase vector coordinate beta
+ * @param[out] pId points to output rotor reference frame d
+ * @param[out] pIq points to output rotor reference frame q
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition and subtraction, hence there is no risk of overflow.
+ */
+ static __INLINE void arm_park_q31(
+ q31_t Ialpha,
+ q31_t Ibeta,
+ q31_t * pId,
+ q31_t * pIq,
+ q31_t sinVal,
+ q31_t cosVal)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+ q31_t product3, product4; /* Temporary variables used to store intermediate results */
+
+ /* Intermediate product is calculated by (Ialpha * cosVal) */
+ product1 = (q31_t) (((q63_t) (Ialpha) * (cosVal)) >> 31);
+
+ /* Intermediate product is calculated by (Ibeta * sinVal) */
+ product2 = (q31_t) (((q63_t) (Ibeta) * (sinVal)) >> 31);
+
+
+ /* Intermediate product is calculated by (Ialpha * sinVal) */
+ product3 = (q31_t) (((q63_t) (Ialpha) * (sinVal)) >> 31);
+
+ /* Intermediate product is calculated by (Ibeta * cosVal) */
+ product4 = (q31_t) (((q63_t) (Ibeta) * (cosVal)) >> 31);
+
+ /* Calculate pId by adding the two intermediate products 1 and 2 */
+ *pId = __QADD(product1, product2);
+
+ /* Calculate pIq by subtracting the two intermediate products 3 from 4 */
+ *pIq = __QSUB(product4, product3);
+ }
+
+ /**
+ * @} end of park group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q7_to_float(
+ q7_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup inv_park Vector Inverse Park transform
+ * Inverse Park transform converts the input flux and torque components to two-coordinate vector.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html parkInvFormula.gif
+ * where pIalpha and pIbeta are the stator vector components,
+ * Id and Iq are rotor vector components and cosVal and sinVal are the
+ * cosine and sine values of theta (rotor flux position).
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Park transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup inv_park
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Inverse Park transform
+ * @param[in] Id input coordinate of rotor reference frame d
+ * @param[in] Iq input coordinate of rotor reference frame q
+ * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ */
+ static __INLINE void arm_inv_park_f32(
+ float32_t Id,
+ float32_t Iq,
+ float32_t * pIalpha,
+ float32_t * pIbeta,
+ float32_t sinVal,
+ float32_t cosVal)
+ {
+ /* Calculate pIalpha using the equation, pIalpha = Id * cosVal - Iq * sinVal */
+ *pIalpha = Id * cosVal - Iq * sinVal;
+
+ /* Calculate pIbeta using the equation, pIbeta = Id * sinVal + Iq * cosVal */
+ *pIbeta = Id * sinVal + Iq * cosVal;
+ }
+
+
+ /**
+ * @brief Inverse Park transform for Q31 version
+ * @param[in] Id input coordinate of rotor reference frame d
+ * @param[in] Iq input coordinate of rotor reference frame q
+ * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition, hence there is no risk of overflow.
+ */
+ static __INLINE void arm_inv_park_q31(
+ q31_t Id,
+ q31_t Iq,
+ q31_t * pIalpha,
+ q31_t * pIbeta,
+ q31_t sinVal,
+ q31_t cosVal)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+ q31_t product3, product4; /* Temporary variables used to store intermediate results */
+
+ /* Intermediate product is calculated by (Id * cosVal) */
+ product1 = (q31_t) (((q63_t) (Id) * (cosVal)) >> 31);
+
+ /* Intermediate product is calculated by (Iq * sinVal) */
+ product2 = (q31_t) (((q63_t) (Iq) * (sinVal)) >> 31);
+
+
+ /* Intermediate product is calculated by (Id * sinVal) */
+ product3 = (q31_t) (((q63_t) (Id) * (sinVal)) >> 31);
+
+ /* Intermediate product is calculated by (Iq * cosVal) */
+ product4 = (q31_t) (((q63_t) (Iq) * (cosVal)) >> 31);
+
+ /* Calculate pIalpha by using the two intermediate products 1 and 2 */
+ *pIalpha = __QSUB(product1, product2);
+
+ /* Calculate pIbeta by using the two intermediate products 3 and 4 */
+ *pIbeta = __QADD(product4, product3);
+ }
+
+ /**
+ * @} end of Inverse park group
+ */
+
+
+ /**
+ * @brief Converts the elements of the Q31 vector to floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q31_to_float(
+ q31_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @ingroup groupInterpolation
+ */
+
+ /**
+ * @defgroup LinearInterpolate Linear Interpolation
+ *
+ * Linear interpolation is a method of curve fitting using linear polynomials.
+ * Linear interpolation works by effectively drawing a straight line between two neighboring samples and returning the appropriate point along that line
+ *
+ * \par
+ * \image html LinearInterp.gif "Linear interpolation"
+ *
+ * \par
+ * A Linear Interpolate function calculates an output value(y), for the input(x)
+ * using linear interpolation of the input values x0, x1( nearest input values) and the output values y0 and y1(nearest output values)
+ *
+ * \par Algorithm:
+ *
+ * y = y0 + (x - x0) * ((y1 - y0)/(x1-x0))
+ * where x0, x1 are nearest values of input x
+ * y0, y1 are nearest values to output y
+ *
+ *
+ * \par
+ * This set of functions implements Linear interpolation process
+ * for Q7, Q15, Q31, and floating-point data types. The functions operate on a single
+ * sample of data and each call to the function returns a single processed value.
+ * S points to an instance of the Linear Interpolate function data structure.
+ * x is the input sample value. The functions returns the output value.
+ *
+ * \par
+ * if x is outside of the table boundary, Linear interpolation returns first value of the table
+ * if x is below input range and returns last value of table if x is above range.
+ */
+
+ /**
+ * @addtogroup LinearInterpolate
+ * @{
+ */
+
+ /**
+ * @brief Process function for the floating-point Linear Interpolation Function.
+ * @param[in,out] S is an instance of the floating-point Linear Interpolation structure
+ * @param[in] x input sample to process
+ * @return y processed output sample.
+ *
+ */
+ static __INLINE float32_t arm_linear_interp_f32(
+ arm_linear_interp_instance_f32 * S,
+ float32_t x)
+ {
+ float32_t y;
+ float32_t x0, x1; /* Nearest input values */
+ float32_t y0, y1; /* Nearest output values */
+ float32_t xSpacing = S->xSpacing; /* spacing between input values */
+ int32_t i; /* Index variable */
+ float32_t *pYData = S->pYData; /* pointer to output table */
+
+ /* Calculation of index */
+ i = (int32_t) ((x - S->x1) / xSpacing);
+
+ if(i < 0)
+ {
+ /* Iniatilize output for below specified range as least output value of table */
+ y = pYData[0];
+ }
+ else if((uint32_t)i >= S->nValues)
+ {
+ /* Iniatilize output for above specified range as last output value of table */
+ y = pYData[S->nValues - 1];
+ }
+ else
+ {
+ /* Calculation of nearest input values */
+ x0 = S->x1 + i * xSpacing;
+ x1 = S->x1 + (i + 1) * xSpacing;
+
+ /* Read of nearest output values */
+ y0 = pYData[i];
+ y1 = pYData[i + 1];
+
+ /* Calculation of output */
+ y = y0 + (x - x0) * ((y1 - y0) / (x1 - x0));
+
+ }
+
+ /* returns output value */
+ return (y);
+ }
+
+
+ /**
+ *
+ * @brief Process function for the Q31 Linear Interpolation Function.
+ * @param[in] pYData pointer to Q31 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample x is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ *
+ */
+ static __INLINE q31_t arm_linear_interp_q31(
+ q31_t * pYData,
+ q31_t x,
+ uint32_t nValues)
+ {
+ q31_t y; /* output */
+ q31_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ int32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ index = ((x & (q31_t)0xFFF00000) >> 20);
+
+ if(index >= (int32_t)(nValues - 1))
+ {
+ return (pYData[nValues - 1]);
+ }
+ else if(index < 0)
+ {
+ return (pYData[0]);
+ }
+ else
+ {
+ /* 20 bits for the fractional part */
+ /* shift left by 11 to keep fract in 1.31 format */
+ fract = (x & 0x000FFFFF) << 11;
+
+ /* Read two nearest output values from the index in 1.31(q31) format */
+ y0 = pYData[index];
+ y1 = pYData[index + 1];
+
+ /* Calculation of y0 * (1-fract) and y is in 2.30 format */
+ y = ((q31_t) ((q63_t) y0 * (0x7FFFFFFF - fract) >> 32));
+
+ /* Calculation of y0 * (1-fract) + y1 *fract and y is in 2.30 format */
+ y += ((q31_t) (((q63_t) y1 * fract) >> 32));
+
+ /* Convert y to 1.31 format */
+ return (y << 1u);
+ }
+ }
+
+
+ /**
+ *
+ * @brief Process function for the Q15 Linear Interpolation Function.
+ * @param[in] pYData pointer to Q15 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample x is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ *
+ */
+ static __INLINE q15_t arm_linear_interp_q15(
+ q15_t * pYData,
+ q31_t x,
+ uint32_t nValues)
+ {
+ q63_t y; /* output */
+ q15_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ int32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ index = ((x & (int32_t)0xFFF00000) >> 20);
+
+ if(index >= (int32_t)(nValues - 1))
+ {
+ return (pYData[nValues - 1]);
+ }
+ else if(index < 0)
+ {
+ return (pYData[0]);
+ }
+ else
+ {
+ /* 20 bits for the fractional part */
+ /* fract is in 12.20 format */
+ fract = (x & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y0 = pYData[index];
+ y1 = pYData[index + 1];
+
+ /* Calculation of y0 * (1-fract) and y is in 13.35 format */
+ y = ((q63_t) y0 * (0xFFFFF - fract));
+
+ /* Calculation of (y0 * (1-fract) + y1 * fract) and y is in 13.35 format */
+ y += ((q63_t) y1 * (fract));
+
+ /* convert y to 1.15 format */
+ return (q15_t) (y >> 20);
+ }
+ }
+
+
+ /**
+ *
+ * @brief Process function for the Q7 Linear Interpolation Function.
+ * @param[in] pYData pointer to Q7 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample x is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ */
+ static __INLINE q7_t arm_linear_interp_q7(
+ q7_t * pYData,
+ q31_t x,
+ uint32_t nValues)
+ {
+ q31_t y; /* output */
+ q7_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ uint32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ if (x < 0)
+ {
+ return (pYData[0]);
+ }
+ index = (x >> 20) & 0xfff;
+
+ if(index >= (nValues - 1))
+ {
+ return (pYData[nValues - 1]);
+ }
+ else
+ {
+ /* 20 bits for the fractional part */
+ /* fract is in 12.20 format */
+ fract = (x & 0x000FFFFF);
+
+ /* Read two nearest output values from the index and are in 1.7(q7) format */
+ y0 = pYData[index];
+ y1 = pYData[index + 1];
+
+ /* Calculation of y0 * (1-fract ) and y is in 13.27(q27) format */
+ y = ((y0 * (0xFFFFF - fract)));
+
+ /* Calculation of y1 * fract + y0 * (1-fract) and y is in 13.27(q27) format */
+ y += (y1 * fract);
+
+ /* convert y to 1.7(q7) format */
+ return (q7_t) (y >> 20);
+ }
+ }
+
+ /**
+ * @} end of LinearInterpolate group
+ */
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for floating-point data.
+ * @param[in] x input value in radians.
+ * @return sin(x).
+ */
+ float32_t arm_sin_f32(
+ float32_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for Q31 data.
+ * @param[in] x Scaled input value in radians.
+ * @return sin(x).
+ */
+ q31_t arm_sin_q31(
+ q31_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for Q15 data.
+ * @param[in] x Scaled input value in radians.
+ * @return sin(x).
+ */
+ q15_t arm_sin_q15(
+ q15_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for floating-point data.
+ * @param[in] x input value in radians.
+ * @return cos(x).
+ */
+ float32_t arm_cos_f32(
+ float32_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for Q31 data.
+ * @param[in] x Scaled input value in radians.
+ * @return cos(x).
+ */
+ q31_t arm_cos_q31(
+ q31_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for Q15 data.
+ * @param[in] x Scaled input value in radians.
+ * @return cos(x).
+ */
+ q15_t arm_cos_q15(
+ q15_t x);
+
+
+ /**
+ * @ingroup groupFastMath
+ */
+
+
+ /**
+ * @defgroup SQRT Square Root
+ *
+ * Computes the square root of a number.
+ * There are separate functions for Q15, Q31, and floating-point data types.
+ * The square root function is computed using the Newton-Raphson algorithm.
+ * This is an iterative algorithm of the form:
+ *
+ * x1 = x0 - f(x0)/f'(x0)
+ *
+ * where x1 is the current estimate,
+ * x0 is the previous estimate, and
+ * f'(x0) is the derivative of f() evaluated at x0.
+ * For the square root function, the algorithm reduces to:
+ *
+ * x0 = in/2 [initial guess]
+ * x1 = 1/2 * ( x0 + in / x0) [each iteration]
+ *
+ */
+
+
+ /**
+ * @addtogroup SQRT
+ * @{
+ */
+
+ /**
+ * @brief Floating-point square root function.
+ * @param[in] in input value.
+ * @param[out] pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * in is negative value and returns zero output for negative values.
+ */
+ static __INLINE arm_status arm_sqrt_f32(
+ float32_t in,
+ float32_t * pOut)
+ {
+ if(in >= 0.0f)
+ {
+
+#if (__FPU_USED == 1) && defined ( __CC_ARM )
+ *pOut = __sqrtf(in);
+#elif (__FPU_USED == 1) && (defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050))
+ *pOut = __builtin_sqrtf(in);
+#elif (__FPU_USED == 1) && defined(__GNUC__)
+ *pOut = __builtin_sqrtf(in);
+#elif (__FPU_USED == 1) && defined ( __ICCARM__ ) && (__VER__ >= 6040000)
+ __ASM("VSQRT.F32 %0,%1" : "=t"(*pOut) : "t"(in));
+#else
+ *pOut = sqrtf(in);
+#endif
+
+ return (ARM_MATH_SUCCESS);
+ }
+ else
+ {
+ *pOut = 0.0f;
+ return (ARM_MATH_ARGUMENT_ERROR);
+ }
+ }
+
+
+ /**
+ * @brief Q31 square root function.
+ * @param[in] in input value. The range of the input value is [0 +1) or 0x00000000 to 0x7FFFFFFF.
+ * @param[out] pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * in is negative value and returns zero output for negative values.
+ */
+ arm_status arm_sqrt_q31(
+ q31_t in,
+ q31_t * pOut);
+
+
+ /**
+ * @brief Q15 square root function.
+ * @param[in] in input value. The range of the input value is [0 +1) or 0x0000 to 0x7FFF.
+ * @param[out] pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * in is negative value and returns zero output for negative values.
+ */
+ arm_status arm_sqrt_q15(
+ q15_t in,
+ q15_t * pOut);
+
+ /**
+ * @} end of SQRT group
+ */
+
+
+ /**
+ * @brief floating-point Circular write function.
+ */
+ static __INLINE void arm_circularWrite_f32(
+ int32_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const int32_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = (uint16_t)wOffset;
+ }
+
+
+
+ /**
+ * @brief floating-point Circular Read function.
+ */
+ static __INLINE void arm_circularRead_f32(
+ int32_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ int32_t * dst,
+ int32_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (int32_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update rOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+
+ /**
+ * @brief Q15 Circular write function.
+ */
+ static __INLINE void arm_circularWrite_q15(
+ q15_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const q15_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = (uint16_t)wOffset;
+ }
+
+
+ /**
+ * @brief Q15 Circular Read function.
+ */
+ static __INLINE void arm_circularRead_q15(
+ q15_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ q15_t * dst,
+ q15_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (q15_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+
+ /**
+ * @brief Q7 Circular write function.
+ */
+ static __INLINE void arm_circularWrite_q7(
+ q7_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const q7_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = (uint16_t)wOffset;
+ }
+
+
+ /**
+ * @brief Q7 Circular Read function.
+ */
+ static __INLINE void arm_circularRead_q7(
+ q7_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ q7_t * dst,
+ q7_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (q7_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update rOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+
+ /**
+ * @brief Sum of the squares of the elements of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_power_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q63_t * pResult);
+
+
+ /**
+ * @brief Sum of the squares of the elements of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_power_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Sum of the squares of the elements of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_power_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q63_t * pResult);
+
+
+ /**
+ * @brief Sum of the squares of the elements of a Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_power_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Mean value of a Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_mean_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * pResult);
+
+
+ /**
+ * @brief Mean value of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_mean_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+
+ /**
+ * @brief Mean value of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_mean_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Mean value of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_mean_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Variance of the elements of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_var_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Variance of the elements of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_var_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Variance of the elements of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_var_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+
+ /**
+ * @brief Root Mean Square of the elements of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_rms_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Root Mean Square of the elements of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_rms_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Root Mean Square of the elements of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_rms_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+
+ /**
+ * @brief Standard deviation of the elements of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_std_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Standard deviation of the elements of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_std_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Standard deviation of the elements of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_std_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+
+ /**
+ * @brief Floating-point complex magnitude
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q31 complex magnitude
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q15 complex magnitude
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q15 complex dot product
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] realResult real part of the result returned here
+ * @param[out] imagResult imaginary part of the result returned here
+ */
+ void arm_cmplx_dot_prod_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ uint32_t numSamples,
+ q31_t * realResult,
+ q31_t * imagResult);
+
+
+ /**
+ * @brief Q31 complex dot product
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] realResult real part of the result returned here
+ * @param[out] imagResult imaginary part of the result returned here
+ */
+ void arm_cmplx_dot_prod_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ uint32_t numSamples,
+ q63_t * realResult,
+ q63_t * imagResult);
+
+
+ /**
+ * @brief Floating-point complex dot product
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] realResult real part of the result returned here
+ * @param[out] imagResult imaginary part of the result returned here
+ */
+ void arm_cmplx_dot_prod_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ uint32_t numSamples,
+ float32_t * realResult,
+ float32_t * imagResult);
+
+
+ /**
+ * @brief Q15 complex-by-real multiplication
+ * @param[in] pSrcCmplx points to the complex input vector
+ * @param[in] pSrcReal points to the real input vector
+ * @param[out] pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ */
+ void arm_cmplx_mult_real_q15(
+ q15_t * pSrcCmplx,
+ q15_t * pSrcReal,
+ q15_t * pCmplxDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q31 complex-by-real multiplication
+ * @param[in] pSrcCmplx points to the complex input vector
+ * @param[in] pSrcReal points to the real input vector
+ * @param[out] pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ */
+ void arm_cmplx_mult_real_q31(
+ q31_t * pSrcCmplx,
+ q31_t * pSrcReal,
+ q31_t * pCmplxDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Floating-point complex-by-real multiplication
+ * @param[in] pSrcCmplx points to the complex input vector
+ * @param[in] pSrcReal points to the real input vector
+ * @param[out] pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ */
+ void arm_cmplx_mult_real_f32(
+ float32_t * pSrcCmplx,
+ float32_t * pSrcReal,
+ float32_t * pCmplxDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Minimum value of a Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] result is output pointer
+ * @param[in] index is the array index of the minimum value in the input buffer.
+ */
+ void arm_min_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * result,
+ uint32_t * index);
+
+
+ /**
+ * @brief Minimum value of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output pointer
+ * @param[in] pIndex is the array index of the minimum value in the input buffer.
+ */
+ void arm_min_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult,
+ uint32_t * pIndex);
+
+
+ /**
+ * @brief Minimum value of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output pointer
+ * @param[out] pIndex is the array index of the minimum value in the input buffer.
+ */
+ void arm_min_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult,
+ uint32_t * pIndex);
+
+
+ /**
+ * @brief Minimum value of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output pointer
+ * @param[out] pIndex is the array index of the minimum value in the input buffer.
+ */
+ void arm_min_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult,
+ uint32_t * pIndex);
+
+
+/**
+ * @brief Maximum value of a Q7 vector.
+ * @param[in] pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] pResult maximum value returned here
+ * @param[out] pIndex index of maximum value returned here
+ */
+ void arm_max_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * pResult,
+ uint32_t * pIndex);
+
+
+/**
+ * @brief Maximum value of a Q15 vector.
+ * @param[in] pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] pResult maximum value returned here
+ * @param[out] pIndex index of maximum value returned here
+ */
+ void arm_max_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult,
+ uint32_t * pIndex);
+
+
+/**
+ * @brief Maximum value of a Q31 vector.
+ * @param[in] pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] pResult maximum value returned here
+ * @param[out] pIndex index of maximum value returned here
+ */
+ void arm_max_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult,
+ uint32_t * pIndex);
+
+
+/**
+ * @brief Maximum value of a floating-point vector.
+ * @param[in] pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] pResult maximum value returned here
+ * @param[out] pIndex index of maximum value returned here
+ */
+ void arm_max_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult,
+ uint32_t * pIndex);
+
+
+ /**
+ * @brief Q15 complex-by-complex multiplication
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_mult_cmplx_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q31 complex-by-complex multiplication
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_mult_cmplx_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Floating-point complex-by-complex multiplication
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_mult_cmplx_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q31 vector.
+ * @param[in] pSrc points to the floating-point input vector
+ * @param[out] pDst points to the Q31 output vector
+ * @param[in] blockSize length of the input vector
+ */
+ void arm_float_to_q31(
+ float32_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q15 vector.
+ * @param[in] pSrc points to the floating-point input vector
+ * @param[out] pDst points to the Q15 output vector
+ * @param[in] blockSize length of the input vector
+ */
+ void arm_float_to_q15(
+ float32_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q7 vector.
+ * @param[in] pSrc points to the floating-point input vector
+ * @param[out] pDst points to the Q7 output vector
+ * @param[in] blockSize length of the input vector
+ */
+ void arm_float_to_q7(
+ float32_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q31 vector to Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q31_to_q15(
+ q31_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q31 vector to Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q31_to_q7(
+ q31_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q15 vector to floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q15_to_float(
+ q15_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q15 vector to Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q15_to_q31(
+ q15_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q15 vector to Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q15_to_q7(
+ q15_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @ingroup groupInterpolation
+ */
+
+ /**
+ * @defgroup BilinearInterpolate Bilinear Interpolation
+ *
+ * Bilinear interpolation is an extension of linear interpolation applied to a two dimensional grid.
+ * The underlying function f(x, y) is sampled on a regular grid and the interpolation process
+ * determines values between the grid points.
+ * Bilinear interpolation is equivalent to two step linear interpolation, first in the x-dimension and then in the y-dimension.
+ * Bilinear interpolation is often used in image processing to rescale images.
+ * The CMSIS DSP library provides bilinear interpolation functions for Q7, Q15, Q31, and floating-point data types.
+ *
+ * Algorithm
+ * \par
+ * The instance structure used by the bilinear interpolation functions describes a two dimensional data table.
+ * For floating-point, the instance structure is defined as:
+ *
+ * typedef struct
+ * {
+ * uint16_t numRows;
+ * uint16_t numCols;
+ * float32_t *pData;
+ * } arm_bilinear_interp_instance_f32;
+ *
+ *
+ * \par
+ * where numRows specifies the number of rows in the table;
+ * numCols specifies the number of columns in the table;
+ * and pData points to an array of size numRows*numCols values.
+ * The data table pTable is organized in row order and the supplied data values fall on integer indexes.
+ * That is, table element (x,y) is located at pTable[x + y*numCols] where x and y are integers.
+ *
+ * \par
+ * Let (x, y) specify the desired interpolation point. Then define:
+ *
+ * XF = floor(x)
+ * YF = floor(y)
+ *
+ * \par
+ * The interpolated output point is computed as:
+ *
+ * f(x, y) = f(XF, YF) * (1-(x-XF)) * (1-(y-YF))
+ * + f(XF+1, YF) * (x-XF)*(1-(y-YF))
+ * + f(XF, YF+1) * (1-(x-XF))*(y-YF)
+ * + f(XF+1, YF+1) * (x-XF)*(y-YF)
+ *
+ * Note that the coordinates (x, y) contain integer and fractional components.
+ * The integer components specify which portion of the table to use while the
+ * fractional components control the interpolation processor.
+ *
+ * \par
+ * if (x,y) are outside of the table boundary, Bilinear interpolation returns zero output.
+ */
+
+ /**
+ * @addtogroup BilinearInterpolate
+ * @{
+ */
+
+
+ /**
+ *
+ * @brief Floating-point bilinear interpolation.
+ * @param[in,out] S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate.
+ * @param[in] Y interpolation coordinate.
+ * @return out interpolated value.
+ */
+ static __INLINE float32_t arm_bilinear_interp_f32(
+ const arm_bilinear_interp_instance_f32 * S,
+ float32_t X,
+ float32_t Y)
+ {
+ float32_t out;
+ float32_t f00, f01, f10, f11;
+ float32_t *pData = S->pData;
+ int32_t xIndex, yIndex, index;
+ float32_t xdiff, ydiff;
+ float32_t b1, b2, b3, b4;
+
+ xIndex = (int32_t) X;
+ yIndex = (int32_t) Y;
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(xIndex < 0 || xIndex > (S->numRows - 1) || yIndex < 0 || yIndex > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* Calculation of index for two nearest points in X-direction */
+ index = (xIndex - 1) + (yIndex - 1) * S->numCols;
+
+
+ /* Read two nearest points in X-direction */
+ f00 = pData[index];
+ f01 = pData[index + 1];
+
+ /* Calculation of index for two nearest points in Y-direction */
+ index = (xIndex - 1) + (yIndex) * S->numCols;
+
+
+ /* Read two nearest points in Y-direction */
+ f10 = pData[index];
+ f11 = pData[index + 1];
+
+ /* Calculation of intermediate values */
+ b1 = f00;
+ b2 = f01 - f00;
+ b3 = f10 - f00;
+ b4 = f00 - f01 - f10 + f11;
+
+ /* Calculation of fractional part in X */
+ xdiff = X - xIndex;
+
+ /* Calculation of fractional part in Y */
+ ydiff = Y - yIndex;
+
+ /* Calculation of bi-linear interpolated output */
+ out = b1 + b2 * xdiff + b3 * ydiff + b4 * xdiff * ydiff;
+
+ /* return to application */
+ return (out);
+ }
+
+
+ /**
+ *
+ * @brief Q31 bilinear interpolation.
+ * @param[in,out] S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+ static __INLINE q31_t arm_bilinear_interp_q31(
+ arm_bilinear_interp_instance_q31 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q31_t out; /* Temporary output */
+ q31_t acc = 0; /* output */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ q31_t x1, x2, y1, y2; /* Nearest output values */
+ int32_t rI, cI; /* Row and column indices */
+ q31_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & (q31_t)0xFFF00000) >> 20);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & (q31_t)0xFFF00000) >> 20);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* shift left xfract by 11 to keep 1.31 format */
+ xfract = (X & 0x000FFFFF) << 11u;
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[(rI) + (int32_t)nCols * (cI) ];
+ x2 = pYData[(rI) + (int32_t)nCols * (cI) + 1];
+
+ /* 20 bits for the fractional part */
+ /* shift left yfract by 11 to keep 1.31 format */
+ yfract = (Y & 0x000FFFFF) << 11u;
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[(rI) + (int32_t)nCols * (cI + 1) ];
+ y2 = pYData[(rI) + (int32_t)nCols * (cI + 1) + 1];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 3.29(q29) format */
+ out = ((q31_t) (((q63_t) x1 * (0x7FFFFFFF - xfract)) >> 32));
+ acc = ((q31_t) (((q63_t) out * (0x7FFFFFFF - yfract)) >> 32));
+
+ /* x2 * (xfract) * (1-yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) x2 * (0x7FFFFFFF - yfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (xfract) >> 32));
+
+ /* y1 * (1 - xfract) * (yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) y1 * (0x7FFFFFFF - xfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
+
+ /* y2 * (xfract) * (yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) y2 * (xfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
+
+ /* Convert acc to 1.31(q31) format */
+ return ((q31_t)(acc << 2));
+ }
+
+
+ /**
+ * @brief Q15 bilinear interpolation.
+ * @param[in,out] S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+ static __INLINE q15_t arm_bilinear_interp_q15(
+ arm_bilinear_interp_instance_q15 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q63_t acc = 0; /* output */
+ q31_t out; /* Temporary output */
+ q15_t x1, x2, y1, y2; /* Nearest output values */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ int32_t rI, cI; /* Row and column indices */
+ q15_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & (q31_t)0xFFF00000) >> 20);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & (q31_t)0xFFF00000) >> 20);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* xfract should be in 12.20 format */
+ xfract = (X & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) ];
+ x2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) + 1];
+
+ /* 20 bits for the fractional part */
+ /* yfract should be in 12.20 format */
+ yfract = (Y & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) ];
+ y2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) + 1];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 13.51 format */
+
+ /* x1 is in 1.15(q15), xfract in 12.20 format and out is in 13.35 format */
+ /* convert 13.35 to 13.31 by right shifting and out is in 1.31 */
+ out = (q31_t) (((q63_t) x1 * (0xFFFFF - xfract)) >> 4u);
+ acc = ((q63_t) out * (0xFFFFF - yfract));
+
+ /* x2 * (xfract) * (1-yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) x2 * (0xFFFFF - yfract)) >> 4u);
+ acc += ((q63_t) out * (xfract));
+
+ /* y1 * (1 - xfract) * (yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) y1 * (0xFFFFF - xfract)) >> 4u);
+ acc += ((q63_t) out * (yfract));
+
+ /* y2 * (xfract) * (yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) y2 * (xfract)) >> 4u);
+ acc += ((q63_t) out * (yfract));
+
+ /* acc is in 13.51 format and down shift acc by 36 times */
+ /* Convert out to 1.15 format */
+ return ((q15_t)(acc >> 36));
+ }
+
+
+ /**
+ * @brief Q7 bilinear interpolation.
+ * @param[in,out] S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+ static __INLINE q7_t arm_bilinear_interp_q7(
+ arm_bilinear_interp_instance_q7 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q63_t acc = 0; /* output */
+ q31_t out; /* Temporary output */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ q7_t x1, x2, y1, y2; /* Nearest output values */
+ int32_t rI, cI; /* Row and column indices */
+ q7_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & (q31_t)0xFFF00000) >> 20);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & (q31_t)0xFFF00000) >> 20);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* xfract should be in 12.20 format */
+ xfract = (X & (q31_t)0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) ];
+ x2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) + 1];
+
+ /* 20 bits for the fractional part */
+ /* yfract should be in 12.20 format */
+ yfract = (Y & (q31_t)0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) ];
+ y2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) + 1];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 16.47 format */
+ out = ((x1 * (0xFFFFF - xfract)));
+ acc = (((q63_t) out * (0xFFFFF - yfract)));
+
+ /* x2 * (xfract) * (1-yfract) in 2.22 and adding to acc */
+ out = ((x2 * (0xFFFFF - yfract)));
+ acc += (((q63_t) out * (xfract)));
+
+ /* y1 * (1 - xfract) * (yfract) in 2.22 and adding to acc */
+ out = ((y1 * (0xFFFFF - xfract)));
+ acc += (((q63_t) out * (yfract)));
+
+ /* y2 * (xfract) * (yfract) in 2.22 and adding to acc */
+ out = ((y2 * (yfract)));
+ acc += (((q63_t) out * (xfract)));
+
+ /* acc in 16.47 format and down shift by 40 to convert to 1.7 format */
+ return ((q7_t)(acc >> 40));
+ }
+
+ /**
+ * @} end of BilinearInterpolate group
+ */
+
+
+/* SMMLAR */
+#define multAcc_32x32_keep32_R(a, x, y) \
+ a = (q31_t) (((((q63_t) a) << 32) + ((q63_t) x * y) + 0x80000000LL ) >> 32)
+
+/* SMMLSR */
+#define multSub_32x32_keep32_R(a, x, y) \
+ a = (q31_t) (((((q63_t) a) << 32) - ((q63_t) x * y) + 0x80000000LL ) >> 32)
+
+/* SMMULR */
+#define mult_32x32_keep32_R(a, x, y) \
+ a = (q31_t) (((q63_t) x * y + 0x80000000LL ) >> 32)
+
+/* SMMLA */
+#define multAcc_32x32_keep32(a, x, y) \
+ a += (q31_t) (((q63_t) x * y) >> 32)
+
+/* SMMLS */
+#define multSub_32x32_keep32(a, x, y) \
+ a -= (q31_t) (((q63_t) x * y) >> 32)
+
+/* SMMUL */
+#define mult_32x32_keep32(a, x, y) \
+ a = (q31_t) (((q63_t) x * y ) >> 32)
+
+
+#if defined ( __CC_ARM )
+ /* Enter low optimization region - place directly above function definition */
+ #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
+ #define LOW_OPTIMIZATION_ENTER \
+ _Pragma ("push") \
+ _Pragma ("O1")
+ #else
+ #define LOW_OPTIMIZATION_ENTER
+ #endif
+
+ /* Exit low optimization region - place directly after end of function definition */
+ #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
+ #define LOW_OPTIMIZATION_EXIT \
+ _Pragma ("pop")
+ #else
+ #define LOW_OPTIMIZATION_EXIT
+ #endif
+
+ /* Enter low optimization region - place directly above function definition */
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+
+ /* Exit low optimization region - place directly after end of function definition */
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define LOW_OPTIMIZATION_ENTER
+ #define LOW_OPTIMIZATION_EXIT
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__GNUC__)
+ #define LOW_OPTIMIZATION_ENTER __attribute__(( optimize("-O1") ))
+ #define LOW_OPTIMIZATION_EXIT
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__ICCARM__)
+ /* Enter low optimization region - place directly above function definition */
+ #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
+ #define LOW_OPTIMIZATION_ENTER \
+ _Pragma ("optimize=low")
+ #else
+ #define LOW_OPTIMIZATION_ENTER
+ #endif
+
+ /* Exit low optimization region - place directly after end of function definition */
+ #define LOW_OPTIMIZATION_EXIT
+
+ /* Enter low optimization region - place directly above function definition */
+ #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER \
+ _Pragma ("optimize=low")
+ #else
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #endif
+
+ /* Exit low optimization region - place directly after end of function definition */
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__CSMC__)
+ #define LOW_OPTIMIZATION_ENTER
+ #define LOW_OPTIMIZATION_EXIT
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__TASKING__)
+ #define LOW_OPTIMIZATION_ENTER
+ #define LOW_OPTIMIZATION_EXIT
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#if defined ( __GNUC__ )
+#pragma GCC diagnostic pop
+#endif
+
+#endif /* _ARM_MATH_H */
+
+/**
+ *
+ * End of file.
+ */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/cmsis_armcc.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/cmsis_armcc.h
new file mode 100644
index 00000000..74c49c67
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/cmsis_armcc.h
@@ -0,0 +1,734 @@
+/**************************************************************************//**
+ * @file cmsis_armcc.h
+ * @brief CMSIS Cortex-M Core Function/Instruction Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CMSIS_ARMCC_H
+#define __CMSIS_ARMCC_H
+
+
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/**
+ \brief Get Control Register
+ \details Returns the content of the Control Register.
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/**
+ \brief Set Control Register
+ \details Writes the given value to the Control Register.
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/**
+ \brief Get IPSR Register
+ \details Returns the content of the IPSR Register.
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/**
+ \brief Get APSR Register
+ \details Returns the content of the APSR Register.
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/**
+ \brief Get xPSR Register
+ \details Returns the content of the xPSR Register.
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/**
+ \brief Get Process Stack Pointer
+ \details Returns the current value of the Process Stack Pointer (PSP).
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/**
+ \brief Set Process Stack Pointer
+ \details Assigns the given value to the Process Stack Pointer (PSP).
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/**
+ \brief Get Main Stack Pointer
+ \details Returns the current value of the Main Stack Pointer (MSP).
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/**
+ \brief Set Main Stack Pointer
+ \details Assigns the given value to the Main Stack Pointer (MSP).
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/**
+ \brief Get Priority Mask
+ \details Returns the current state of the priority mask bit from the Priority Mask Register.
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/**
+ \brief Set Priority Mask
+ \details Assigns the given value to the Priority Mask Register.
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+
+/**
+ \brief Enable FIQ
+ \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/**
+ \brief Disable FIQ
+ \details Disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/**
+ \brief Get Base Priority
+ \details Returns the current value of the Base Priority register.
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/**
+ \brief Set Base Priority
+ \details Assigns the given value to the Base Priority register.
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xFFU);
+}
+
+
+/**
+ \brief Set Base Priority with condition
+ \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+ or the new value increases the BASEPRI priority level.
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri)
+{
+ register uint32_t __regBasePriMax __ASM("basepri_max");
+ __regBasePriMax = (basePri & 0xFFU);
+}
+
+
+/**
+ \brief Get Fault Mask
+ \details Returns the current value of the Fault Mask register.
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/**
+ \brief Set Fault Mask
+ \details Assigns the given value to the Fault Mask register.
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
+
+
+#if (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U)
+
+/**
+ \brief Get FPSCR
+ \details Returns the current value of the Floating Point Status/Control register.
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0U);
+#endif
+}
+
+
+/**
+ \brief Set FPSCR
+ \details Assigns the given value to the Floating Point Status/Control register.
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) */
+
+
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+/**
+ \brief No Operation
+ \details No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/**
+ \brief Wait For Interrupt
+ \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/**
+ \brief Wait For Event
+ \details Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/**
+ \brief Send Event
+ \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/**
+ \brief Instruction Synchronization Barrier
+ \details Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or memory,
+ after the instruction has been completed.
+ */
+#define __ISB() do {\
+ __schedule_barrier();\
+ __isb(0xF);\
+ __schedule_barrier();\
+ } while (0U)
+
+/**
+ \brief Data Synchronization Barrier
+ \details Acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() do {\
+ __schedule_barrier();\
+ __dsb(0xF);\
+ __schedule_barrier();\
+ } while (0U)
+
+/**
+ \brief Data Memory Barrier
+ \details Ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() do {\
+ __schedule_barrier();\
+ __dmb(0xF);\
+ __schedule_barrier();\
+ } while (0U)
+
+/**
+ \brief Reverse byte order (32 bit)
+ \details Reverses the byte order in integer value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/**
+ \brief Reverse byte order (16 bit)
+ \details Reverses the byte order in two unsigned short values.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/**
+ \brief Reverse byte order in signed short value
+ \details Reverses the byte order in a signed short value with sign extension to integer.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/**
+ \brief Rotate Right in unsigned value (32 bit)
+ \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/**
+ \brief Breakpoint
+ \details Causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+/**
+ \brief Reverse bit order of value
+ \details Reverses the bit order of the given value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+ #define __RBIT __rbit
+#else
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+ int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
+
+ result = value; /* r will be reversed bits of v; first get LSB of v */
+ for (value >>= 1U; value; value >>= 1U)
+ {
+ result <<= 1U;
+ result |= value & 1U;
+ s--;
+ }
+ result <<= s; /* shift when v's highest bits are zero */
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Count leading zeros
+ \details Counts the number of leading zeros of a data value.
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+
+/**
+ \brief LDR Exclusive (8 bit)
+ \details Executes a exclusive LDR instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+#else
+ #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop")
+#endif
+
+
+/**
+ \brief LDR Exclusive (16 bit)
+ \details Executes a exclusive LDR instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+#else
+ #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop")
+#endif
+
+
+/**
+ \brief LDR Exclusive (32 bit)
+ \details Executes a exclusive LDR instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+#else
+ #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop")
+#endif
+
+
+/**
+ \brief STR Exclusive (8 bit)
+ \details Executes a exclusive STR instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __STREXB(value, ptr) __strex(value, ptr)
+#else
+ #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
+#endif
+
+
+/**
+ \brief STR Exclusive (16 bit)
+ \details Executes a exclusive STR instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __STREXH(value, ptr) __strex(value, ptr)
+#else
+ #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
+#endif
+
+
+/**
+ \brief STR Exclusive (32 bit)
+ \details Executes a exclusive STR instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __STREXW(value, ptr) __strex(value, ptr)
+#else
+ #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
+#endif
+
+
+/**
+ \brief Remove the exclusive lock
+ \details Removes the exclusive lock which is created by LDREX.
+ */
+#define __CLREX __clrex
+
+
+/**
+ \brief Signed Saturate
+ \details Saturates a signed value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/**
+ \brief Unsigned Saturate
+ \details Saturates an unsigned value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/**
+ \brief Rotate Right with Extend (32 bit)
+ \details Moves each bit of a bitstring right by one bit.
+ The carry input is shifted in at the left end of the bitstring.
+ \param [in] value Value to rotate
+ \return Rotated value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
+{
+ rrx r0, r0
+ bx lr
+}
+#endif
+
+
+/**
+ \brief LDRT Unprivileged (8 bit)
+ \details Executes a Unprivileged LDRT instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr))
+
+
+/**
+ \brief LDRT Unprivileged (16 bit)
+ \details Executes a Unprivileged LDRT instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr))
+
+
+/**
+ \brief LDRT Unprivileged (32 bit)
+ \details Executes a Unprivileged LDRT instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr))
+
+
+/**
+ \brief STRT Unprivileged (8 bit)
+ \details Executes a Unprivileged STRT instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRBT(value, ptr) __strt(value, ptr)
+
+
+/**
+ \brief STRT Unprivileged (16 bit)
+ \details Executes a Unprivileged STRT instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRHT(value, ptr) __strt(value, ptr)
+
+
+/**
+ \brief STRT Unprivileged (32 bit)
+ \details Executes a Unprivileged STRT instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRT(value, ptr) __strt(value, ptr)
+
+#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if (__CORTEX_M >= 0x04U) /* only for Cortex-M4 and above */
+
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32U) ) >> 32U))
+
+#endif /* (__CORTEX_M >= 0x04) */
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CMSIS_ARMCC_H */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/cmsis_armcc_V6.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/cmsis_armcc_V6.h
new file mode 100644
index 00000000..cd13240c
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/cmsis_armcc_V6.h
@@ -0,0 +1,1800 @@
+/**************************************************************************//**
+ * @file cmsis_armcc_V6.h
+ * @brief CMSIS Cortex-M Core Function/Instruction Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CMSIS_ARMCC_V6_H
+#define __CMSIS_ARMCC_V6_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+/**
+ \brief Enable IRQ Interrupts
+ \details Enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/**
+ \brief Disable IRQ Interrupts
+ \details Disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/**
+ \brief Get Control Register
+ \details Returns the content of the Control Register.
+ \return Control Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Control Register (non-secure)
+ \details Returns the content of the non-secure Control Register when in secure mode.
+ \return non-secure Control Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_CONTROL_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Control Register
+ \details Writes the given value to the Control Register.
+ \param [in] control Control Register value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Control Register (non-secure)
+ \details Writes the given value to the non-secure Control Register when in secure state.
+ \param [in] control Control Register value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_CONTROL_NS(uint32_t control)
+{
+ __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory");
+}
+#endif
+
+
+/**
+ \brief Get IPSR Register
+ \details Returns the content of the IPSR Register.
+ \return IPSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get IPSR Register (non-secure)
+ \details Returns the content of the non-secure IPSR Register when in secure state.
+ \return IPSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_IPSR_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Get APSR Register
+ \details Returns the content of the APSR Register.
+ \return APSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get APSR Register (non-secure)
+ \details Returns the content of the non-secure APSR Register when in secure state.
+ \return APSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_APSR_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Get xPSR Register
+ \details Returns the content of the xPSR Register.
+ \return xPSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get xPSR Register (non-secure)
+ \details Returns the content of the non-secure xPSR Register when in secure state.
+ \return xPSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_xPSR_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Get Process Stack Pointer
+ \details Returns the current value of the Process Stack Pointer (PSP).
+ \return PSP Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Process Stack Pointer (non-secure)
+ \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state.
+ \return PSP Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PSP_NS(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Process Stack Pointer
+ \details Assigns the given value to the Process Stack Pointer (PSP).
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : "sp");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Process Stack Pointer (non-secure)
+ \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state.
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : "sp");
+}
+#endif
+
+
+/**
+ \brief Get Main Stack Pointer
+ \details Returns the current value of the Main Stack Pointer (MSP).
+ \return MSP Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Main Stack Pointer (non-secure)
+ \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state.
+ \return MSP Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_MSP_NS(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Main Stack Pointer
+ \details Assigns the given value to the Main Stack Pointer (MSP).
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : "sp");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Main Stack Pointer (non-secure)
+ \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state.
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : "sp");
+}
+#endif
+
+
+/**
+ \brief Get Priority Mask
+ \details Returns the current state of the priority mask bit from the Priority Mask Register.
+ \return Priority Mask value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Priority Mask (non-secure)
+ \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state.
+ \return Priority Mask value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PRIMASK_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Priority Mask
+ \details Assigns the given value to the Priority Mask Register.
+ \param [in] priMask Priority Mask
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Priority Mask (non-secure)
+ \details Assigns the given value to the non-secure Priority Mask Register when in secure state.
+ \param [in] priMask Priority Mask
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PRIMASK_NS(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory");
+}
+#endif
+
+
+#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */
+
+/**
+ \brief Enable FIQ
+ \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/**
+ \brief Disable FIQ
+ \details Disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/**
+ \brief Get Base Priority
+ \details Returns the current value of the Base Priority register.
+ \return Base Priority register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Base Priority (non-secure)
+ \details Returns the current value of the non-secure Base Priority register when in secure state.
+ \return Base Priority register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_BASEPRI_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Base Priority
+ \details Assigns the given value to the Base Priority register.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Base Priority (non-secure)
+ \details Assigns the given value to the non-secure Base Priority register when in secure state.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_BASEPRI_NS(uint32_t value)
+{
+ __ASM volatile ("MSR basepri_ns, %0" : : "r" (value) : "memory");
+}
+#endif
+
+
+/**
+ \brief Set Base Priority with condition
+ \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+ or the new value increases the BASEPRI priority level.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value)
+{
+ __ASM volatile ("MSR basepri_max, %0" : : "r" (value) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Base Priority with condition (non_secure)
+ \details Assigns the given value to the non-secure Base Priority register when in secure state only if BASEPRI masking is disabled,
+ or the new value increases the BASEPRI priority level.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_BASEPRI_MAX_NS(uint32_t value)
+{
+ __ASM volatile ("MSR basepri_max_ns, %0" : : "r" (value) : "memory");
+}
+#endif
+
+
+/**
+ \brief Get Fault Mask
+ \details Returns the current value of the Fault Mask register.
+ \return Fault Mask register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Fault Mask (non-secure)
+ \details Returns the current value of the non-secure Fault Mask register when in secure state.
+ \return Fault Mask register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_FAULTMASK_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Fault Mask
+ \details Assigns the given value to the Fault Mask register.
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Fault Mask (non-secure)
+ \details Assigns the given value to the non-secure Fault Mask register when in secure state.
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory");
+}
+#endif
+
+
+#endif /* ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */
+
+
+#if (__ARM_ARCH_8M__ == 1U)
+
+/**
+ \brief Get Process Stack Pointer Limit
+ \details Returns the current value of the Process Stack Pointer Limit (PSPLIM).
+ \return PSPLIM Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSPLIM(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psplim" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
+/**
+ \brief Get Process Stack Pointer Limit (non-secure)
+ \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state.
+ \return PSPLIM Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PSPLIM_NS(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Process Stack Pointer Limit
+ \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM).
+ \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit)
+{
+ __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit));
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
+/**
+ \brief Set Process Stack Pointer (non-secure)
+ \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state.
+ \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit)
+{
+ __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit));
+}
+#endif
+
+
+/**
+ \brief Get Main Stack Pointer Limit
+ \details Returns the current value of the Main Stack Pointer Limit (MSPLIM).
+ \return MSPLIM Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSPLIM(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msplim" : "=r" (result) );
+
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
+/**
+ \brief Get Main Stack Pointer Limit (non-secure)
+ \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state.
+ \return MSPLIM Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_MSPLIM_NS(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Main Stack Pointer Limit
+ \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM).
+ \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_MSPLIM(uint32_t MainStackPtrLimit)
+{
+ __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit));
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
+/**
+ \brief Set Main Stack Pointer Limit (non-secure)
+ \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state.
+ \param [in] MainStackPtrLimit Main Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit)
+{
+ __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit));
+}
+#endif
+
+#endif /* (__ARM_ARCH_8M__ == 1U) */
+
+
+#if ((__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=4 */
+
+/**
+ \brief Get FPSCR
+ \details eturns the current value of the Floating Point Status/Control register.
+ \return Floating Point Status/Control register value
+ */
+#define __get_FPSCR __builtin_arm_get_fpscr
+#if 0
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ uint32_t result;
+
+ __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+#endif
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get FPSCR (non-secure)
+ \details Returns the current value of the non-secure Floating Point Status/Control register when in secure state.
+ \return Floating Point Status/Control register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_FPSCR_NS(void)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ uint32_t result;
+
+ __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("VMRS %0, fpscr_ns" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+#endif
+
+
+/**
+ \brief Set FPSCR
+ \details Assigns the given value to the Floating Point Status/Control register.
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+#define __set_FPSCR __builtin_arm_set_fpscr
+#if 0
+__attribute__((always_inline)) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+#endif
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set FPSCR (non-secure)
+ \details Assigns the given value to the non-secure Floating Point Status/Control register when in secure state.
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_FPSCR_NS(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("VMSR fpscr_ns, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+#endif
+
+#endif /* ((__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */
+
+
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constraint "l"
+ * Otherwise, use general registers, specified by constraint "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/**
+ \brief No Operation
+ \details No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __builtin_arm_nop
+
+/**
+ \brief Wait For Interrupt
+ \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
+ */
+#define __WFI __builtin_arm_wfi
+
+
+/**
+ \brief Wait For Event
+ \details Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __builtin_arm_wfe
+
+
+/**
+ \brief Send Event
+ \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __builtin_arm_sev
+
+
+/**
+ \brief Instruction Synchronization Barrier
+ \details Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or memory,
+ after the instruction has been completed.
+ */
+#define __ISB() __builtin_arm_isb(0xF);
+
+/**
+ \brief Data Synchronization Barrier
+ \details Acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __builtin_arm_dsb(0xF);
+
+
+/**
+ \brief Data Memory Barrier
+ \details Ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __builtin_arm_dmb(0xF);
+
+
+/**
+ \brief Reverse byte order (32 bit)
+ \details Reverses the byte order in integer value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __builtin_bswap32
+
+
+/**
+ \brief Reverse byte order (16 bit)
+ \details Reverses the byte order in two unsigned short values.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV16 __builtin_bswap16 /* ToDo: ARMCC_V6: check if __builtin_bswap16 could be used */
+#if 0
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Reverse byte order in signed short value
+ \details Reverses the byte order in a signed short value with sign extension to integer.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+ /* ToDo: ARMCC_V6: check if __builtin_bswap16 could be used */
+__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+ int32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/**
+ \brief Rotate Right in unsigned value (32 bit)
+ \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+ \param [in] op1 Value to rotate
+ \param [in] op2 Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32U - op2));
+}
+
+
+/**
+ \brief Breakpoint
+ \details Causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+/**
+ \brief Reverse bit order of value
+ \details Reverses the bit order of the given value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+ /* ToDo: ARMCC_V6: check if __builtin_arm_rbit is supported */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+#else
+ int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
+
+ result = value; /* r will be reversed bits of v; first get LSB of v */
+ for (value >>= 1U; value; value >>= 1U)
+ {
+ result <<= 1U;
+ result |= value & 1U;
+ s--;
+ }
+ result <<= s; /* shift when v's highest bits are zero */
+#endif
+ return(result);
+}
+
+
+/**
+ \brief Count leading zeros
+ \details Counts the number of leading zeros of a data value.
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __builtin_clz
+
+
+#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */
+
+/**
+ \brief LDR Exclusive (8 bit)
+ \details Executes a exclusive LDR instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB (uint8_t)__builtin_arm_ldrex
+
+
+/**
+ \brief LDR Exclusive (16 bit)
+ \details Executes a exclusive LDR instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH (uint16_t)__builtin_arm_ldrex
+
+
+/**
+ \brief LDR Exclusive (32 bit)
+ \details Executes a exclusive LDR instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW (uint32_t)__builtin_arm_ldrex
+
+
+/**
+ \brief STR Exclusive (8 bit)
+ \details Executes a exclusive STR instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB (uint32_t)__builtin_arm_strex
+
+
+/**
+ \brief STR Exclusive (16 bit)
+ \details Executes a exclusive STR instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH (uint32_t)__builtin_arm_strex
+
+
+/**
+ \brief STR Exclusive (32 bit)
+ \details Executes a exclusive STR instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW (uint32_t)__builtin_arm_strex
+
+
+/**
+ \brief Remove the exclusive lock
+ \details Removes the exclusive lock which is created by LDREX.
+ */
+#define __CLREX __builtin_arm_clrex
+
+
+/**
+ \brief Signed Saturate
+ \details Saturates a signed value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+/*#define __SSAT __builtin_arm_ssat*/
+#define __SSAT(ARG1,ARG2) \
+({ \
+ int32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/**
+ \brief Unsigned Saturate
+ \details Saturates an unsigned value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __builtin_arm_usat
+#if 0
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+#endif
+
+
+/**
+ \brief Rotate Right with Extend (32 bit)
+ \details Moves each bit of a bitstring right by one bit.
+ The carry input is shifted in at the left end of the bitstring.
+ \param [in] value Value to rotate
+ \return Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/**
+ \brief LDRT Unprivileged (8 bit)
+ \details Executes a Unprivileged LDRT instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDRT Unprivileged (16 bit)
+ \details Executes a Unprivileged LDRT instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return ((uint16_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDRT Unprivileged (32 bit)
+ \details Executes a Unprivileged LDRT instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return(result);
+}
+
+
+/**
+ \brief STRT Unprivileged (8 bit)
+ \details Executes a Unprivileged STRT instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *ptr)
+{
+ __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief STRT Unprivileged (16 bit)
+ \details Executes a Unprivileged STRT instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *ptr)
+{
+ __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief STRT Unprivileged (32 bit)
+ \details Executes a Unprivileged STRT instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *ptr)
+{
+ __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) );
+}
+
+#endif /* ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */
+
+
+#if (__ARM_ARCH_8M__ == 1U)
+
+/**
+ \brief Load-Acquire (8 bit)
+ \details Executes a LDAB instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDAB(volatile uint8_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return ((uint8_t) result);
+}
+
+
+/**
+ \brief Load-Acquire (16 bit)
+ \details Executes a LDAH instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDAH(volatile uint16_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return ((uint16_t) result);
+}
+
+
+/**
+ \brief Load-Acquire (32 bit)
+ \details Executes a LDA instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDA(volatile uint32_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return(result);
+}
+
+
+/**
+ \brief Store-Release (8 bit)
+ \details Executes a STLB instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STLB(uint8_t value, volatile uint8_t *ptr)
+{
+ __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief Store-Release (16 bit)
+ \details Executes a STLH instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STLH(uint16_t value, volatile uint16_t *ptr)
+{
+ __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief Store-Release (32 bit)
+ \details Executes a STL instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STL(uint32_t value, volatile uint32_t *ptr)
+{
+ __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief Load-Acquire Exclusive (8 bit)
+ \details Executes a LDAB exclusive instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDAEXB (uint8_t)__builtin_arm_ldaex
+
+
+/**
+ \brief Load-Acquire Exclusive (16 bit)
+ \details Executes a LDAH exclusive instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDAEXH (uint16_t)__builtin_arm_ldaex
+
+
+/**
+ \brief Load-Acquire Exclusive (32 bit)
+ \details Executes a LDA exclusive instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDAEX (uint32_t)__builtin_arm_ldaex
+
+
+/**
+ \brief Store-Release Exclusive (8 bit)
+ \details Executes a STLB exclusive instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STLEXB (uint32_t)__builtin_arm_stlex
+
+
+/**
+ \brief Store-Release Exclusive (16 bit)
+ \details Executes a STLH exclusive instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STLEXH (uint32_t)__builtin_arm_stlex
+
+
+/**
+ \brief Store-Release Exclusive (32 bit)
+ \details Executes a STL exclusive instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STLEX (uint32_t)__builtin_arm_stlex
+
+#endif /* (__ARM_ARCH_8M__ == 1U) */
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if (__ARM_FEATURE_DSP == 1U) /* ToDo: ARMCC_V6: This should be ARCH >= ARMv7-M + SIMD */
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE int32_t __QADD( int32_t op1, int32_t op2)
+{
+ int32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE int32_t __QSUB( int32_t op1, int32_t op2)
+{
+ int32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#endif /* (__ARM_FEATURE_DSP == 1U) */
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CMSIS_ARMCC_V6_H */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/cmsis_gcc.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/cmsis_gcc.h
new file mode 100644
index 00000000..bb89fbba
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/cmsis_gcc.h
@@ -0,0 +1,1373 @@
+/**************************************************************************//**
+ * @file cmsis_gcc.h
+ * @brief CMSIS Cortex-M Core Function/Instruction Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CMSIS_GCC_H
+#define __CMSIS_GCC_H
+
+/* ignore some GCC warnings */
+#if defined ( __GNUC__ )
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wsign-conversion"
+#pragma GCC diagnostic ignored "-Wconversion"
+#pragma GCC diagnostic ignored "-Wunused-parameter"
+#endif
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+/**
+ \brief Enable IRQ Interrupts
+ \details Enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/**
+ \brief Disable IRQ Interrupts
+ \details Disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/**
+ \brief Get Control Register
+ \details Returns the content of the Control Register.
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Control Register
+ \details Writes the given value to the Control Register.
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/**
+ \brief Get IPSR Register
+ \details Returns the content of the IPSR Register.
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Get APSR Register
+ \details Returns the content of the APSR Register.
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Get xPSR Register
+ \details Returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Get Process Stack Pointer
+ \details Returns the current value of the Process Stack Pointer (PSP).
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Process Stack Pointer
+ \details Assigns the given value to the Process Stack Pointer (PSP).
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/**
+ \brief Get Main Stack Pointer
+ \details Returns the current value of the Main Stack Pointer (MSP).
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Main Stack Pointer
+ \details Assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/**
+ \brief Get Priority Mask
+ \details Returns the current state of the priority mask bit from the Priority Mask Register.
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Priority Mask
+ \details Assigns the given value to the Priority Mask Register.
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03U)
+
+/**
+ \brief Enable FIQ
+ \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/**
+ \brief Disable FIQ
+ \details Disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/**
+ \brief Get Base Priority
+ \details Returns the current value of the Base Priority register.
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Base Priority
+ \details Assigns the given value to the Base Priority register.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/**
+ \brief Set Base Priority with condition
+ \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+ or the new value increases the BASEPRI priority level.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value)
+{
+ __ASM volatile ("MSR basepri_max, %0" : : "r" (value) : "memory");
+}
+
+
+/**
+ \brief Get Fault Mask
+ \details Returns the current value of the Fault Mask register.
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Fault Mask
+ \details Assigns the given value to the Fault Mask register.
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03U) */
+
+
+#if (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U)
+
+/**
+ \brief Get FPSCR
+ \details Returns the current value of the Floating Point Status/Control register.
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/**
+ \brief Set FPSCR
+ \details Assigns the given value to the Floating Point Status/Control register.
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) */
+
+
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constraint "l"
+ * Otherwise, use general registers, specified by constraint "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/**
+ \brief No Operation
+ \details No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/**
+ \brief Wait For Interrupt
+ \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/**
+ \brief Wait For Event
+ \details Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/**
+ \brief Send Event
+ \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/**
+ \brief Instruction Synchronization Barrier
+ \details Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or memory,
+ after the instruction has been completed.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb 0xF":::"memory");
+}
+
+
+/**
+ \brief Data Synchronization Barrier
+ \details Acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb 0xF":::"memory");
+}
+
+
+/**
+ \brief Data Memory Barrier
+ \details Ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb 0xF":::"memory");
+}
+
+
+/**
+ \brief Reverse byte order (32 bit)
+ \details Reverses the byte order in integer value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/**
+ \brief Reverse byte order (16 bit)
+ \details Reverses the byte order in two unsigned short values.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/**
+ \brief Reverse byte order in signed short value
+ \details Reverses the byte order in a signed short value with sign extension to integer.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ int32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/**
+ \brief Rotate Right in unsigned value (32 bit)
+ \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32U - op2));
+}
+
+
+/**
+ \brief Breakpoint
+ \details Causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+/**
+ \brief Reverse bit order of value
+ \details Reverses the bit order of the given value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+#else
+ int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
+
+ result = value; /* r will be reversed bits of v; first get LSB of v */
+ for (value >>= 1U; value; value >>= 1U)
+ {
+ result <<= 1U;
+ result |= value & 1U;
+ s--;
+ }
+ result <<= s; /* shift when v's highest bits are zero */
+#endif
+ return(result);
+}
+
+
+/**
+ \brief Count leading zeros
+ \details Counts the number of leading zeros of a data value.
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __builtin_clz
+
+
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+
+/**
+ \brief LDR Exclusive (8 bit)
+ \details Executes a exclusive LDR instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDR Exclusive (16 bit)
+ \details Executes a exclusive LDR instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint16_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDR Exclusive (32 bit)
+ \details Executes a exclusive LDR instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/**
+ \brief STR Exclusive (8 bit)
+ \details Executes a exclusive STR instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+ return(result);
+}
+
+
+/**
+ \brief STR Exclusive (16 bit)
+ \details Executes a exclusive STR instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+ return(result);
+}
+
+
+/**
+ \brief STR Exclusive (32 bit)
+ \details Executes a exclusive STR instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/**
+ \brief Remove the exclusive lock
+ \details Removes the exclusive lock which is created by LDREX.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/**
+ \brief Signed Saturate
+ \details Saturates a signed value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/**
+ \brief Unsigned Saturate
+ \details Saturates an unsigned value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/**
+ \brief Rotate Right with Extend (32 bit)
+ \details Moves each bit of a bitstring right by one bit.
+ The carry input is shifted in at the left end of the bitstring.
+ \param [in] value Value to rotate
+ \return Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/**
+ \brief LDRT Unprivileged (8 bit)
+ \details Executes a Unprivileged LDRT instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDRT Unprivileged (16 bit)
+ \details Executes a Unprivileged LDRT instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint16_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDRT Unprivileged (32 bit)
+ \details Executes a Unprivileged LDRT instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/**
+ \brief STRT Unprivileged (8 bit)
+ \details Executes a Unprivileged STRT instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *addr)
+{
+ __ASM volatile ("strbt %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief STRT Unprivileged (16 bit)
+ \details Executes a Unprivileged STRT instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *addr)
+{
+ __ASM volatile ("strht %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief STRT Unprivileged (32 bit)
+ \details Executes a Unprivileged STRT instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *addr)
+{
+ __ASM volatile ("strt %1, %0" : "=Q" (*addr) : "r" (value) );
+}
+
+#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if (__CORTEX_M >= 0x04U) /* only for Cortex-M4 and above */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ int32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __QADD( int32_t op1, int32_t op2)
+{
+ int32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __QSUB( int32_t op1, int32_t op2)
+{
+ int32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x04) */
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#if defined ( __GNUC__ )
+#pragma GCC diagnostic pop
+#endif
+
+#endif /* __CMSIS_GCC_H */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cm0.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cm0.h
new file mode 100644
index 00000000..711dad55
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cm0.h
@@ -0,0 +1,798 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000U
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:1; /*!< bit: 0 Reserved */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31U];
+ __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31U];
+ __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31U];
+ __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31U];
+ uint32_t RESERVED4[64U];
+ __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+ Therefore they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
+#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
+#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+ else
+ {
+ NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device.h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cm0plus.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cm0plus.h
new file mode 100644
index 00000000..b04aa390
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cm0plus.h
@@ -0,0 +1,914 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0+ definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \
+ __CM0PLUS_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000U
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0U
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31U];
+ __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31U];
+ __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31U];
+ __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31U];
+ uint32_t RESERVED4[64U];
+ __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1U)
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1U)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+ Therefore they are not covered by the Cortex-M0+ header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
+#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
+#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+ else
+ {
+ NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device.h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cm3.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cm3.h
new file mode 100644
index 00000000..b4ac4c7b
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cm3.h
@@ -0,0 +1,1763 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200U
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27U /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24U];
+ __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24U];
+ __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24U];
+ __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24U];
+ __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56U];
+ __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644U];
+ __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5U];
+ __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201U) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200U))
+ __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1U];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __OM union
+ {
+ __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864U];
+ __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15U];
+ __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15U];
+ __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29U];
+ __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6U];
+ __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1U];
+ __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1U];
+ __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55U];
+ __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131U];
+ __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759U];
+ __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1U];
+ __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39U];
+ __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8U];
+ __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/**
+ \brief Set Priority Grouping
+ \details Sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/**
+ \brief Get Priority Grouping
+ \details Reads the priority grouping field from the NVIC Interrupt Controller.
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Active Interrupt
+ \details Reads the active register in NVIC and returns the active bit.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else
+ {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief Encode Priority
+ \details Encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/**
+ \brief Decode Priority
+ \details Decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device.h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+ \brief ITM Send Character
+ \details Transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+ \param [in] ch Character to transmit.
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0U].u32 == 0UL)
+ {
+ __NOP();
+ }
+ ITM->PORT[0U].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/**
+ \brief ITM Receive Character
+ \details Inputs a character via the external variable \ref ITM_RxBuffer.
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+ {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/**
+ \brief ITM Check Character
+ \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+ {
+ return (0); /* no character available */
+ }
+ else
+ {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cm4.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cm4.h
new file mode 100644
index 00000000..dc840ebf
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cm4.h
@@ -0,0 +1,1937 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16U) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1U
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+#include "core_cmSimd.h" /* Compiler specific SIMD Intrinsics */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000U
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0U
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27U /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+#define APSR_GE_Pos 16U /*!< APSR: GE Position */
+#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */
+#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */
+#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */
+
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24U];
+ __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24U];
+ __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24U];
+ __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24U];
+ __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56U];
+ __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644U];
+ __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5U];
+ __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __OM union
+ {
+ __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864U];
+ __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15U];
+ __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15U];
+ __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29U];
+ __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6U];
+ __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1U];
+ __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1U];
+ __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55U];
+ __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131U];
+ __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759U];
+ __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1U];
+ __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39U];
+ __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8U];
+ __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register Definitions */
+#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register Definitions */
+#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register Definitions */
+#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 Definitions */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 Definitions */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1U)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/**
+ \brief Set Priority Grouping
+ \details Sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/**
+ \brief Get Priority Grouping
+ \details Reads the priority grouping field from the NVIC Interrupt Controller.
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Active Interrupt
+ \details Reads the active register in NVIC and returns the active bit.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else
+ {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief Encode Priority
+ \details Encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/**
+ \brief Decode Priority
+ \details Decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device.h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+ \brief ITM Send Character
+ \details Transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+ \param [in] ch Character to transmit.
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0U].u32 == 0UL)
+ {
+ __NOP();
+ }
+ ITM->PORT[0U].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/**
+ \brief ITM Receive Character
+ \details Inputs a character via the external variable \ref ITM_RxBuffer.
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+ {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/**
+ \brief ITM Check Character
+ \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+ {
+ return (0); /* no character available */
+ }
+ else
+ {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cm7.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cm7.h
new file mode 100644
index 00000000..3b7530ad
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cm7.h
@@ -0,0 +1,2512 @@
+/**************************************************************************//**
+ * @file core_cm7.h
+ * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM7_H_GENERIC
+#define __CORE_CM7_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex_M7
+ @{
+ */
+
+/* CMSIS CM7 definitions */
+#define __CM7_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM7_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16U) | \
+ __CM7_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x07U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1U
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+#include "core_cmSimd.h" /* Compiler specific SIMD Intrinsics */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM7_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM7_H_DEPENDANT
+#define __CORE_CM7_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM7_REV
+ #define __CM7_REV 0x0000U
+ #warning "__CM7_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0U
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __ICACHE_PRESENT
+ #define __ICACHE_PRESENT 0U
+ #warning "__ICACHE_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __DCACHE_PRESENT
+ #define __DCACHE_PRESENT 0U
+ #warning "__DCACHE_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __DTCM_PRESENT
+ #define __DTCM_PRESENT 0U
+ #warning "__DTCM_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 3U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M7 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27U /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+#define APSR_GE_Pos 16U /*!< APSR: GE Position */
+#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */
+#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */
+#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */
+
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24U];
+ __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24U];
+ __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24U];
+ __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24U];
+ __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56U];
+ __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644U];
+ __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __IM uint32_t ID_MFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[1U];
+ __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */
+ __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */
+ __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */
+ __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */
+ __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+ uint32_t RESERVED3[93U];
+ __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */
+ uint32_t RESERVED4[15U];
+ __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */
+ __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */
+ __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 1 */
+ uint32_t RESERVED5[1U];
+ __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */
+ uint32_t RESERVED6[1U];
+ __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */
+ __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */
+ __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */
+ __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */
+ __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */
+ __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */
+ __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */
+ __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */
+ uint32_t RESERVED7[6U];
+ __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */
+ __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */
+ __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */
+ __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */
+ __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */
+ uint32_t RESERVED8[1U];
+ __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: Branch prediction enable bit Position */
+#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */
+
+#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: Instruction cache enable bit Position */
+#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */
+
+#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: Cache enable bit Position */
+#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */
+
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/* SCB Cache Level ID Register Definitions */
+#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */
+#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */
+
+#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */
+#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */
+
+/* SCB Cache Type Register Definitions */
+#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */
+#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */
+
+#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */
+#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */
+
+#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */
+#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */
+
+#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */
+#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */
+
+#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */
+#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */
+
+/* SCB Cache Size ID Register Definitions */
+#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */
+#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */
+
+#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */
+#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */
+
+#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */
+#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */
+
+#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */
+#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */
+
+#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */
+#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */
+
+#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */
+#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */
+
+#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */
+#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */
+
+/* SCB Cache Size Selection Register Definitions */
+#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */
+#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */
+
+#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */
+#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */
+
+/* SCB Software Triggered Interrupt Register Definitions */
+#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */
+#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */
+
+/* SCB D-Cache Invalidate by Set-way Register Definitions */
+#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */
+#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */
+
+#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */
+#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */
+
+/* SCB D-Cache Clean by Set-way Register Definitions */
+#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */
+#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */
+
+#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */
+#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */
+
+/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */
+#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */
+#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */
+
+#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */
+#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */
+
+/* Instruction Tightly-Coupled Memory Control Register Definitions */
+#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */
+#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */
+
+#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */
+#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */
+
+#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */
+#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */
+
+#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */
+#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */
+
+/* Data Tightly-Coupled Memory Control Register Definitions */
+#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */
+#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */
+
+#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */
+#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */
+
+#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */
+#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */
+
+#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */
+#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */
+
+/* AHBP Control Register Definitions */
+#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */
+#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */
+
+#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */
+#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */
+
+/* L1 Cache Control Register Definitions */
+#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */
+#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */
+
+#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */
+#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */
+
+#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */
+#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */
+
+/* AHBS Control Register Definitions */
+#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */
+#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */
+
+#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */
+#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */
+
+#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/
+#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */
+
+/* Auxiliary Bus Fault Status Register Definitions */
+#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/
+#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */
+
+#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/
+#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */
+
+#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/
+#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */
+
+#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/
+#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */
+
+#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/
+#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */
+
+#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/
+#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */
+#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */
+
+#define SCnSCB_ACTLR_DISRAMODE_Pos 11U /*!< ACTLR: DISRAMODE Position */
+#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */
+
+#define SCnSCB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */
+#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __OM union
+ {
+ __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864U];
+ __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15U];
+ __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15U];
+ __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29U];
+ __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6U];
+ __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1U];
+ __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1U];
+ __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+ uint32_t RESERVED3[981U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55U];
+ __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131U];
+ __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759U];
+ __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1U];
+ __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39U];
+ __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8U];
+ __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+ __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register Definitions */
+#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register Definitions */
+#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register Definitions */
+#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 Definitions */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 Definitions */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */
+
+/* Media and FP Feature Register 2 Definitions */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1U)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/**
+ \brief Set Priority Grouping
+ \details Sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/**
+ \brief Get Priority Grouping
+ \details Reads the priority grouping field from the NVIC Interrupt Controller.
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Active Interrupt
+ \details Reads the active register in NVIC and returns the active bit.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHPR[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else
+ {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return(((uint32_t)SCB->SHPR[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief Encode Priority
+ \details Encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/**
+ \brief Decode Priority
+ \details Decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+/* ########################## FPU functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_FpuFunctions FPU Functions
+ \brief Function that provides FPU type.
+ @{
+ */
+
+/**
+ \brief get FPU type
+ \details returns the FPU type
+ \returns
+ - \b 0: No FPU
+ - \b 1: Single precision FPU
+ - \b 2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+ uint32_t mvfr0;
+
+ mvfr0 = SCB->MVFR0;
+ if ((mvfr0 & 0x00000FF0UL) == 0x220UL)
+ {
+ return 2UL; /* Double + Single precision FPU */
+ }
+ else if ((mvfr0 & 0x00000FF0UL) == 0x020UL)
+ {
+ return 1UL; /* Single precision FPU */
+ }
+ else
+ {
+ return 0UL; /* No FPU */
+ }
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ########################## Cache functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_CacheFunctions Cache Functions
+ \brief Functions that configure Instruction and Data cache.
+ @{
+ */
+
+/* Cache Size ID Register Macros */
+#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos)
+#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos )
+
+
+/**
+ \brief Enable I-Cache
+ \details Turns on I-Cache
+ */
+__STATIC_INLINE void SCB_EnableICache (void)
+{
+ #if (__ICACHE_PRESENT == 1U)
+ __DSB();
+ __ISB();
+ SCB->ICIALLU = 0UL; /* invalidate I-Cache */
+ SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Disable I-Cache
+ \details Turns off I-Cache
+ */
+__STATIC_INLINE void SCB_DisableICache (void)
+{
+ #if (__ICACHE_PRESENT == 1U)
+ __DSB();
+ __ISB();
+ SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */
+ SCB->ICIALLU = 0UL; /* invalidate I-Cache */
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Invalidate I-Cache
+ \details Invalidates I-Cache
+ */
+__STATIC_INLINE void SCB_InvalidateICache (void)
+{
+ #if (__ICACHE_PRESENT == 1U)
+ __DSB();
+ __ISB();
+ SCB->ICIALLU = 0UL;
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Enable D-Cache
+ \details Turns on D-Cache
+ */
+__STATIC_INLINE void SCB_EnableDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ /* invalidate D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) |
+ ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+ __DSB();
+
+ SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Disable D-Cache
+ \details Turns off D-Cache
+ */
+__STATIC_INLINE void SCB_DisableDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */
+
+ /* clean & invalidate D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) |
+ ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Invalidate D-Cache
+ \details Invalidates D-Cache
+ */
+__STATIC_INLINE void SCB_InvalidateDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ /* invalidate D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) |
+ ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Clean D-Cache
+ \details Cleans D-Cache
+ */
+__STATIC_INLINE void SCB_CleanDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ /* clean D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) |
+ ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Clean & Invalidate D-Cache
+ \details Cleans and Invalidates D-Cache
+ */
+__STATIC_INLINE void SCB_CleanInvalidateDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ /* clean & invalidate D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) |
+ ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief D-Cache Invalidate by address
+ \details Invalidates D-Cache for the given address
+ \param[in] addr address (aligned to 32-byte boundary)
+ \param[in] dsize size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_InvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ int32_t op_size = dsize;
+ uint32_t op_addr = (uint32_t)addr;
+ int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */
+
+ __DSB();
+
+ while (op_size > 0) {
+ SCB->DCIMVAC = op_addr;
+ op_addr += linesize;
+ op_size -= linesize;
+ }
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief D-Cache Clean by address
+ \details Cleans D-Cache for the given address
+ \param[in] addr address (aligned to 32-byte boundary)
+ \param[in] dsize size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+ #if (__DCACHE_PRESENT == 1)
+ int32_t op_size = dsize;
+ uint32_t op_addr = (uint32_t) addr;
+ int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */
+
+ __DSB();
+
+ while (op_size > 0) {
+ SCB->DCCMVAC = op_addr;
+ op_addr += linesize;
+ op_size -= linesize;
+ }
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief D-Cache Clean and Invalidate by address
+ \details Cleans and invalidates D_Cache for the given address
+ \param[in] addr address (aligned to 32-byte boundary)
+ \param[in] dsize size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ int32_t op_size = dsize;
+ uint32_t op_addr = (uint32_t) addr;
+ int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */
+
+ __DSB();
+
+ while (op_size > 0) {
+ SCB->DCCIMVAC = op_addr;
+ op_addr += linesize;
+ op_size -= linesize;
+ }
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/*@} end of CMSIS_Core_CacheFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device.h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+ \brief ITM Send Character
+ \details Transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+ \param [in] ch Character to transmit.
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0U].u32 == 0UL)
+ {
+ __NOP();
+ }
+ ITM->PORT[0U].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/**
+ \brief ITM Receive Character
+ \details Inputs a character via the external variable \ref ITM_RxBuffer.
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+ {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/**
+ \brief ITM Check Character
+ \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+ {
+ return (0); /* no character available */
+ }
+ else
+ {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM7_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cmFunc.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cmFunc.h
new file mode 100644
index 00000000..652a48af
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cmFunc.h
@@ -0,0 +1,87 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+*/
+
+/*------------------ RealView Compiler -----------------*/
+#if defined ( __CC_ARM )
+ #include "cmsis_armcc.h"
+
+/*------------------ ARM Compiler V6 -------------------*/
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #include "cmsis_armcc_V6.h"
+
+/*------------------ GNU Compiler ----------------------*/
+#elif defined ( __GNUC__ )
+ #include "cmsis_gcc.h"
+
+/*------------------ ICC Compiler ----------------------*/
+#elif defined ( __ICCARM__ )
+ #include
+
+/*------------------ TI CCS Compiler -------------------*/
+#elif defined ( __TMS470__ )
+ #include
+
+/*------------------ TASKING Compiler ------------------*/
+#elif defined ( __TASKING__ )
+ /*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+/*------------------ COSMIC Compiler -------------------*/
+#elif defined ( __CSMC__ )
+ #include
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+#endif /* __CORE_CMFUNC_H */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cmInstr.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cmInstr.h
new file mode 100644
index 00000000..f474b0e6
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cmInstr.h
@@ -0,0 +1,87 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+/*------------------ RealView Compiler -----------------*/
+#if defined ( __CC_ARM )
+ #include "cmsis_armcc.h"
+
+/*------------------ ARM Compiler V6 -------------------*/
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #include "cmsis_armcc_V6.h"
+
+/*------------------ GNU Compiler ----------------------*/
+#elif defined ( __GNUC__ )
+ #include "cmsis_gcc.h"
+
+/*------------------ ICC Compiler ----------------------*/
+#elif defined ( __ICCARM__ )
+ #include
+
+/*------------------ TI CCS Compiler -------------------*/
+#elif defined ( __TMS470__ )
+ #include
+
+/*------------------ TASKING Compiler ------------------*/
+#elif defined ( __TASKING__ )
+ /*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+/*------------------ COSMIC Compiler -------------------*/
+#elif defined ( __CSMC__ )
+ #include
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cmSimd.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cmSimd.h
new file mode 100644
index 00000000..66bf5c2a
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_cmSimd.h
@@ -0,0 +1,96 @@
+/**************************************************************************//**
+ * @file core_cmSimd.h
+ * @brief CMSIS Cortex-M SIMD Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CMSIMD_H
+#define __CORE_CMSIMD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+/*------------------ RealView Compiler -----------------*/
+#if defined ( __CC_ARM )
+ #include "cmsis_armcc.h"
+
+/*------------------ ARM Compiler V6 -------------------*/
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #include "cmsis_armcc_V6.h"
+
+/*------------------ GNU Compiler ----------------------*/
+#elif defined ( __GNUC__ )
+ #include "cmsis_gcc.h"
+
+/*------------------ ICC Compiler ----------------------*/
+#elif defined ( __ICCARM__ )
+ #include
+
+/*------------------ TI CCS Compiler -------------------*/
+#elif defined ( __TMS470__ )
+ #include
+
+/*------------------ TASKING Compiler ------------------*/
+#elif defined ( __TASKING__ )
+ /*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+/*------------------ COSMIC Compiler -------------------*/
+#elif defined ( __CSMC__ )
+ #include
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CMSIMD_H */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_sc000.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_sc000.h
new file mode 100644
index 00000000..514dbd81
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_sc000.h
@@ -0,0 +1,926 @@
+/**************************************************************************//**
+ * @file core_sc000.h
+ * @brief CMSIS SC000 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_SC000_H_GENERIC
+#define __CORE_SC000_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup SC000
+ @{
+ */
+
+/* CMSIS SC000 definitions */
+#define __SC000_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __SC000_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \
+ __SC000_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_SC (000U) /*!< Cortex secure core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC000_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_SC000_H_DEPENDANT
+#define __CORE_SC000_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __SC000_REV
+ #define __SC000_REV 0x0000U
+ #warning "__SC000_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group SC000 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:1; /*!< bit: 0 Reserved */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31U];
+ __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31U];
+ __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31U];
+ __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31U];
+ uint32_t RESERVED4[64U];
+ __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ uint32_t RESERVED1[154U];
+ __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+ Therefore they are not covered by the SC000 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of SC000 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
+#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
+#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+ else
+ {
+ NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device.h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC000_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_sc300.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_sc300.h
new file mode 100644
index 00000000..8bd18aa3
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/CMSIS/Include/core_sc300.h
@@ -0,0 +1,1745 @@
+/**************************************************************************//**
+ * @file core_sc300.h
+ * @brief CMSIS SC300 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_SC300_H_GENERIC
+#define __CORE_SC300_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup SC3000
+ @{
+ */
+
+/* CMSIS SC300 definitions */
+#define __SC300_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __SC300_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \
+ __SC300_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_SC (300U) /*!< Cortex secure core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC300_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_SC300_H_DEPENDANT
+#define __CORE_SC300_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __SC300_REV
+ #define __SC300_REV 0x0000U
+ #warning "__SC300_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group SC300 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27U /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24U];
+ __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24U];
+ __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24U];
+ __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24U];
+ __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56U];
+ __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644U];
+ __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5U];
+ __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+ uint32_t RESERVED1[129U];
+ __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ uint32_t RESERVED1[1U];
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __OM union
+ {
+ __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864U];
+ __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15U];
+ __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15U];
+ __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29U];
+ __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6U];
+ __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1U];
+ __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1U];
+ __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55U];
+ __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131U];
+ __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759U];
+ __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1U];
+ __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39U];
+ __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8U];
+ __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/**
+ \brief Set Priority Grouping
+ \details Sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/**
+ \brief Get Priority Grouping
+ \details Reads the priority grouping field from the NVIC Interrupt Controller.
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Active Interrupt
+ \details Reads the active register in NVIC and returns the active bit.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else
+ {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief Encode Priority
+ \details Encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/**
+ \brief Decode Priority
+ \details Decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device.h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+ \brief ITM Send Character
+ \details Transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+ \param [in] ch Character to transmit.
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0U].u32 == 0UL)
+ {
+ __NOP();
+ }
+ ITM->PORT[0U].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/**
+ \brief ITM Receive Character
+ \details Inputs a character via the external variable \ref ITM_RxBuffer.
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+ {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/**
+ \brief ITM Check Character
+ \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+ {
+ return (0); /* no character available */
+ }
+ else
+ {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC300_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
new file mode 100644
index 00000000..d42722a2
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
@@ -0,0 +1,3312 @@
+/**
+ ******************************************************************************
+ * @file stm32_hal_legacy.h
+ * @author MCD Application Team
+ * @brief This file contains aliases definition for the STM32Cube HAL constants
+ * macros and functions maintained for legacy purpose.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32_HAL_LEGACY
+#define __STM32_HAL_LEGACY
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define AES_FLAG_RDERR CRYP_FLAG_RDERR
+#define AES_FLAG_WRERR CRYP_FLAG_WRERR
+#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF
+#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR
+#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define ADC_RESOLUTION12b ADC_RESOLUTION_12B
+#define ADC_RESOLUTION10b ADC_RESOLUTION_10B
+#define ADC_RESOLUTION8b ADC_RESOLUTION_8B
+#define ADC_RESOLUTION6b ADC_RESOLUTION_6B
+#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN
+#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED
+#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV
+#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV
+#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV
+#define REGULAR_GROUP ADC_REGULAR_GROUP
+#define INJECTED_GROUP ADC_INJECTED_GROUP
+#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP
+#define AWD_EVENT ADC_AWD_EVENT
+#define AWD1_EVENT ADC_AWD1_EVENT
+#define AWD2_EVENT ADC_AWD2_EVENT
+#define AWD3_EVENT ADC_AWD3_EVENT
+#define OVR_EVENT ADC_OVR_EVENT
+#define JQOVF_EVENT ADC_JQOVF_EVENT
+#define ALL_CHANNELS ADC_ALL_CHANNELS
+#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS
+#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS
+#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR
+#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT
+#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1
+#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2
+#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4
+#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6
+#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8
+#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO
+#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2
+#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO
+#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4
+#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO
+#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11
+#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1
+#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE
+#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING
+#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING
+#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING
+#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5
+
+#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY
+#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY
+#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC
+#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC
+#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL
+#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL
+#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE
+#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE
+#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1
+#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2
+#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3
+#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4
+#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5
+#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6
+#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7
+#if defined(STM32L0)
+#define COMP_LPTIMCONNECTION_ENABLED ((uint32_t)0x00000003U) /*!< COMPX output generic naming: connected to LPTIM input 1 for COMP1, LPTIM input 2 for COMP2 */
+#endif
+#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1
+#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32L0) || defined(STM32L4)
+#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON
+
+#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1
+#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2
+#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3
+#define COMP_NONINVERTINGINPUT_IO4 COMP_INPUT_PLUS_IO4
+#define COMP_NONINVERTINGINPUT_IO5 COMP_INPUT_PLUS_IO5
+#define COMP_NONINVERTINGINPUT_IO6 COMP_INPUT_PLUS_IO6
+
+#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT
+#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT
+#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT
+#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT
+#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1
+#if defined(STM32L0)
+/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2), */
+/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding */
+/* to the second dedicated IO (only for COMP2). */
+#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO2
+#else
+#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2
+#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3
+#endif
+#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4
+#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5
+
+#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW
+#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH
+
+/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */
+/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */
+#if defined(COMP_CSR_LOCK)
+#define COMP_FLAG_LOCK COMP_CSR_LOCK
+#elif defined(COMP_CSR_COMP1LOCK)
+#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK
+#elif defined(COMP_CSR_COMPxLOCK)
+#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK
+#endif
+
+#if defined(STM32L4)
+#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1
+#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1
+#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1
+#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2
+#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2
+#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2
+#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE
+#endif
+
+#if defined(STM32L0)
+#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED
+#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER
+#else
+#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED
+#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED
+#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER
+#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER
+#endif
+
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE
+#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define DAC1_CHANNEL_1 DAC_CHANNEL_1
+#define DAC1_CHANNEL_2 DAC_CHANNEL_2
+#define DAC2_CHANNEL_1 DAC_CHANNEL_1
+#define DAC_WAVE_NONE 0x00000000U
+#define DAC_WAVE_NOISE DAC_CR_WAVE1_0
+#define DAC_WAVE_TRIANGLE DAC_CR_WAVE1_1
+#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE
+#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE
+#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2
+#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4
+#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5
+#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4
+#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2
+#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32
+#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6
+#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7
+#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67
+#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67
+#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76
+#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6
+#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7
+#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6
+
+#define IS_HAL_REMAPDMA IS_DMA_REMAP
+#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE
+#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE
+
+
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD
+#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD
+#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS
+#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES
+#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES
+#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE
+#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE
+#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE
+#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE
+#define OBEX_PCROP OPTIONBYTE_PCROP
+#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG
+#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE
+#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE
+#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE
+#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD
+#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD
+#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE
+#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD
+#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD
+#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE
+#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD
+#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD
+#define PAGESIZE FLASH_PAGE_SIZE
+#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD
+#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1
+#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2
+#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3
+#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4
+#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST
+#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST
+#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA
+#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB
+#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA
+#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB
+#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE
+#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN
+#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE
+#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN
+#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE
+#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD
+#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP
+#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV
+#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR
+#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA
+#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS
+#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST
+#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR
+#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO
+#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS
+#define OB_WDG_SW OB_IWDG_SW
+#define OB_WDG_HW OB_IWDG_HW
+#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET
+#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET
+#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET
+#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET
+#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR
+#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0
+#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1
+#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1
+#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2
+#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3
+/**
+ * @}
+ */
+
+
+/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose
+ * @{
+ */
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) || defined(STM32G4)
+#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE
+#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16
+#else
+#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE
+#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE
+#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8
+#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef
+#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef
+/**
+ * @}
+ */
+
+/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define GET_GPIO_SOURCE GPIO_GET_INDEX
+#define GET_GPIO_INDEX GPIO_GET_INDEX
+
+#if defined(STM32F4)
+#define GPIO_AF12_SDMMC GPIO_AF12_SDIO
+#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO
+#endif
+
+#if defined(STM32F7)
+#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1
+#endif
+
+#if defined(STM32L4)
+#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1
+#endif
+
+#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1
+#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1
+#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1
+
+#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4)
+#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
+#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH
+#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
+#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 */
+
+#if defined(STM32L1)
+ #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW
+ #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM
+ #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH
+ #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
+#endif /* STM32L1 */
+
+#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1)
+ #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
+ #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+ #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH
+#endif /* STM32F0 || STM32F3 || STM32F1 */
+
+#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#if defined(STM32H7)
+ #define __HAL_RCC_JPEG_CLK_ENABLE __HAL_RCC_JPGDECEN_CLK_ENABLE
+ #define __HAL_RCC_JPEG_CLK_DISABLE __HAL_RCC_JPGDECEN_CLK_DISABLE
+ #define __HAL_RCC_JPEG_FORCE_RESET __HAL_RCC_JPGDECRST_FORCE_RESET
+ #define __HAL_RCC_JPEG_RELEASE_RESET __HAL_RCC_JPGDECRST_RELEASE_RESET
+ #define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE
+ #define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE
+
+ #define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1
+ #define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2
+
+ #define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX
+ #define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX
+
+ #define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT
+ #define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT
+ #define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT
+ #define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT
+ #define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT
+ #define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT
+ #define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0
+ #define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO HAL_DMAMUX1_REQ_GEN_TIM12_TRGO
+
+ #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT
+ #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT
+ #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT
+ #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT
+ #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT
+ #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT
+ #define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT
+ #define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP
+ #define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP
+ #define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP
+ #define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT
+ #define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP
+ #define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT
+ #define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP
+ #define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP
+ #define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP HAL_DMAMUX2_REQ_GEN_I2C4_WKUP
+ #define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP HAL_DMAMUX2_REQ_GEN_SPI6_WKUP
+ #define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT HAL_DMAMUX2_REQ_GEN_COMP1_OUT
+ #define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT HAL_DMAMUX2_REQ_GEN_COMP2_OUT
+ #define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP HAL_DMAMUX2_REQ_GEN_RTC_WKUP
+ #define HAL_DMAMUX2_REQUEST_GEN_EXTI0 HAL_DMAMUX2_REQ_GEN_EXTI0
+ #define HAL_DMAMUX2_REQUEST_GEN_EXTI2 HAL_DMAMUX2_REQ_GEN_EXTI2
+ #define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT
+ #define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT HAL_DMAMUX2_REQ_GEN_SPI6_IT
+ #define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT
+ #define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT
+ #define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT HAL_DMAMUX2_REQ_GEN_ADC3_IT
+ #define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT
+ #define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT
+ #define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT
+
+ #define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT
+ #define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING
+ #define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING
+ #define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING
+
+
+#endif /* STM32H7 */
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7
+
+#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER
+#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER
+#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD
+#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD
+#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER
+#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER
+#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE
+#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE
+#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE
+#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE
+#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE
+#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE
+#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE
+#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE
+#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE
+#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7)
+#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE
+#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define KR_KEY_RELOAD IWDG_KEY_RELOAD
+#define KR_KEY_ENABLE IWDG_KEY_ENABLE
+#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE
+#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS
+
+#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING
+#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING
+#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING
+
+#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/* The following 3 definition have also been present in a temporary version of lptim.h */
+/* They need to be renamed also to the right name, just in case */
+#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b
+#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b
+#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b
+#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b
+
+#define NAND_AddressTypedef NAND_AddressTypeDef
+
+#define __ARRAY_ADDRESS ARRAY_ADDRESS
+#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE
+#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE
+#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE
+#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define NOR_StatusTypedef HAL_NOR_StatusTypeDef
+#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS
+#define NOR_ONGOING HAL_NOR_STATUS_ONGOING
+#define NOR_ERROR HAL_NOR_STATUS_ERROR
+#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT
+
+#define __NOR_WRITE NOR_WRITE
+#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT
+/**
+ * @}
+ */
+
+/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0
+#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1
+#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2
+#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3
+
+#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0
+#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1
+#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2
+#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3
+
+#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
+#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
+
+#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
+#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
+
+#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0
+#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO
+#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0
+#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS
+#if defined(STM32F7)
+ #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+/* Compact Flash-ATA registers description */
+#define CF_DATA ATA_DATA
+#define CF_SECTOR_COUNT ATA_SECTOR_COUNT
+#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER
+#define CF_CYLINDER_LOW ATA_CYLINDER_LOW
+#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH
+#define CF_CARD_HEAD ATA_CARD_HEAD
+#define CF_STATUS_CMD ATA_STATUS_CMD
+#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE
+#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA
+
+/* Compact Flash-ATA commands */
+#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD
+#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD
+#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD
+#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD
+
+#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef
+#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS
+#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING
+#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR
+#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define FORMAT_BIN RTC_FORMAT_BIN
+#define FORMAT_BCD RTC_FORMAT_BCD
+
+#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE
+#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE
+#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+
+#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE
+#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
+#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
+
+#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT
+#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2
+
+#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE
+#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1
+#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1
+
+#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT
+#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1
+#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE
+#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE
+
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+
+#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE
+#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE
+
+#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE
+#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE
+#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE
+#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE
+#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE
+#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE
+#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE
+#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE
+#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE
+#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE
+#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE
+#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE
+#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE
+
+#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE
+#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE
+
+#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE
+#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK
+#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK
+
+#define TIM_DMABase_CR1 TIM_DMABASE_CR1
+#define TIM_DMABase_CR2 TIM_DMABASE_CR2
+#define TIM_DMABase_SMCR TIM_DMABASE_SMCR
+#define TIM_DMABase_DIER TIM_DMABASE_DIER
+#define TIM_DMABase_SR TIM_DMABASE_SR
+#define TIM_DMABase_EGR TIM_DMABASE_EGR
+#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1
+#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2
+#define TIM_DMABase_CCER TIM_DMABASE_CCER
+#define TIM_DMABase_CNT TIM_DMABASE_CNT
+#define TIM_DMABase_PSC TIM_DMABASE_PSC
+#define TIM_DMABase_ARR TIM_DMABASE_ARR
+#define TIM_DMABase_RCR TIM_DMABASE_RCR
+#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1
+#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2
+#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3
+#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4
+#define TIM_DMABase_BDTR TIM_DMABASE_BDTR
+#define TIM_DMABase_DCR TIM_DMABASE_DCR
+#define TIM_DMABase_DMAR TIM_DMABASE_DMAR
+#define TIM_DMABase_OR1 TIM_DMABASE_OR1
+#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3
+#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5
+#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6
+#define TIM_DMABase_OR2 TIM_DMABASE_OR2
+#define TIM_DMABase_OR3 TIM_DMABASE_OR3
+#define TIM_DMABase_OR TIM_DMABASE_OR
+
+#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE
+#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1
+#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2
+#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3
+#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4
+#define TIM_EventSource_COM TIM_EVENTSOURCE_COM
+#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER
+#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK
+#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2
+
+#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER
+#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS
+#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS
+#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS
+#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS
+#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS
+#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS
+#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS
+#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS
+#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS
+#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS
+#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS
+#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS
+#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS
+#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS
+#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS
+#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS
+#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING
+#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
+#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
+
+#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE
+#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE
+
+#define __DIV_SAMPLING16 UART_DIV_SAMPLING16
+#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16
+#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16
+#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16
+
+#define __DIV_SAMPLING8 UART_DIV_SAMPLING8
+#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8
+#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8
+#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8
+
+#define __DIV_LPUART UART_DIV_LPUART
+
+#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE
+#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE
+#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE
+
+#define USARTNACK_ENABLED USART_NACK_ENABLE
+#define USARTNACK_DISABLED USART_NACK_DISABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CFR_BASE WWDG_CFR_BASE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CAN_FilterFIFO0 CAN_FILTER_FIFO0
+#define CAN_FilterFIFO1 CAN_FILTER_FIFO1
+#define CAN_IT_RQCP0 CAN_IT_TME
+#define CAN_IT_RQCP1 CAN_IT_TME
+#define CAN_IT_RQCP2 CAN_IT_TME
+#define INAK_TIMEOUT CAN_TIMEOUT_VALUE
+#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE
+#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U)
+#define CAN_TXSTATUS_OK ((uint8_t)0x01U)
+#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U)
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define VLAN_TAG ETH_VLAN_TAG
+#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD
+#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD
+#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD
+#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK
+#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK
+#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK
+#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK
+
+#define ETH_MMCCR 0x00000100U
+#define ETH_MMCRIR 0x00000104U
+#define ETH_MMCTIR 0x00000108U
+#define ETH_MMCRIMR 0x0000010CU
+#define ETH_MMCTIMR 0x00000110U
+#define ETH_MMCTGFSCCR 0x0000014CU
+#define ETH_MMCTGFMSCCR 0x00000150U
+#define ETH_MMCTGFCR 0x00000168U
+#define ETH_MMCRFCECR 0x00000194U
+#define ETH_MMCRFAECR 0x00000198U
+#define ETH_MMCRGUFCR 0x000001C4U
+
+#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */
+#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */
+#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */
+#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */
+#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */
+#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */
+#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */
+#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input frame for transmission */
+#define ETH_MAC_MII_TRANSMIT_ACTIVE 0x00010000U /* MAC MII transmit engine active */
+#define ETH_MAC_RXFIFO_EMPTY 0x00000000U /* Rx FIFO fill level: empty */
+#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */
+#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control activate threshold */
+#define ETH_MAC_RXFIFO_FULL 0x00000300U /* Rx FIFO fill level: full */
+#if defined(STM32F1)
+#else
+#define ETH_MAC_READCONTROLLER_IDLE 0x00000000U /* Rx FIFO read controller IDLE state */
+#define ETH_MAC_READCONTROLLER_READING_DATA 0x00000020U /* Rx FIFO read controller Reading frame data */
+#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status (or time-stamp) */
+#endif
+#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and status */
+#define ETH_MAC_RXFIFO_WRITE_ACTIVE 0x00000010U /* Rx FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_NOTACTIVE 0x00000000U /* MAC small FIFO read / write controllers not active */
+#define ETH_MAC_SMALL_FIFO_READ_ACTIVE 0x00000002U /* MAC small FIFO read controller active */
+#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE 0x00000004U /* MAC small FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_RW_ACTIVE 0x00000006U /* MAC small FIFO read / write controllers active */
+#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE 0x00000001U /* MAC MII receive protocol engine active */
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR
+#define DCMI_IT_OVF DCMI_IT_OVR
+#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI
+#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI
+
+#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop
+#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop
+#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop
+
+/**
+ * @}
+ */
+
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+ defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888
+#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888
+#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565
+#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555
+#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444
+
+#define CM_ARGB8888 DMA2D_INPUT_ARGB8888
+#define CM_RGB888 DMA2D_INPUT_RGB888
+#define CM_RGB565 DMA2D_INPUT_RGB565
+#define CM_ARGB1555 DMA2D_INPUT_ARGB1555
+#define CM_ARGB4444 DMA2D_INPUT_ARGB4444
+#define CM_L8 DMA2D_INPUT_L8
+#define CM_AL44 DMA2D_INPUT_AL44
+#define CM_AL88 DMA2D_INPUT_AL88
+#define CM_L4 DMA2D_INPUT_L4
+#define CM_A8 DMA2D_INPUT_A8
+#define CM_A4 DMA2D_INPUT_A4
+/**
+ * @}
+ */
+#endif /* STM32L4 || STM32F7*/
+
+/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef
+#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef
+#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish
+#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish
+#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish
+#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish
+
+/*HASH Algorithm Selection*/
+
+#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1
+#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224
+#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256
+#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5
+
+#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH
+#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC
+
+#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY
+#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode
+#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode
+#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode
+#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode
+#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode
+#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode
+#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
+#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect
+#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT())
+#if defined(STM32L0)
+#else
+#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT())
+#endif
+#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
+#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram
+#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown
+#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown
+#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock
+#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock
+#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase
+#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program
+
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter
+#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter
+#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter
+#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter
+
+#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose
+ * @{
+ */
+#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD
+#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg
+#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown
+#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor
+#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg
+#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown
+#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor
+#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler
+#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD
+#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler
+#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback
+#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive
+#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive
+#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC
+#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC
+#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM
+
+#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL
+#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING
+#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING
+#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING
+#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING
+#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING
+#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING
+
+#define CR_OFFSET_BB PWR_CR_OFFSET_BB
+#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB
+#define PMODE_BIT_NUMBER VOS_BIT_NUMBER
+#define CR_PMODE_BB CR_VOS_BB
+
+#define DBP_BitNumber DBP_BIT_NUMBER
+#define PVDE_BitNumber PVDE_BIT_NUMBER
+#define PMODE_BitNumber PMODE_BIT_NUMBER
+#define EWUP_BitNumber EWUP_BIT_NUMBER
+#define FPDS_BitNumber FPDS_BIT_NUMBER
+#define ODEN_BitNumber ODEN_BIT_NUMBER
+#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER
+#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER
+#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER
+#define BRE_BitNumber BRE_BIT_NUMBER
+
+#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL
+
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT
+#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback
+#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt
+#define HAL_TIM_DMAError TIM_DMAError
+#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt
+#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback
+#define HAL_LTDC_Relaod HAL_LTDC_Reload
+#define HAL_LTDC_StructInitFromVideoConfig HAL_LTDCEx_StructInitFromVideoConfig
+#define HAL_LTDC_StructInitFromAdaptedCommandConfig HAL_LTDCEx_StructInitFromAdaptedCommandConfig
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros ------------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define AES_IT_CC CRYP_IT_CC
+#define AES_IT_ERR CRYP_IT_ERR
+#define AES_FLAG_CCF CRYP_FLAG_CCF
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE
+#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH
+#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH
+#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM
+#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC
+#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM
+#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC
+#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI
+#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK
+#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG
+#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG
+#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE
+#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE
+#define __HAL_SYSCFG_SRAM2_WRP_ENABLE __HAL_SYSCFG_SRAM2_WRP_0_31_ENABLE
+
+#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY
+#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48
+#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS
+#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER
+#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __ADC_ENABLE __HAL_ADC_ENABLE
+#define __ADC_DISABLE __HAL_ADC_DISABLE
+#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS
+#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS
+#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE
+#define __ADC_IS_ENABLED ADC_IS_ENABLE
+#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR
+#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR
+#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING
+#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE
+
+#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION
+#define __HAL_ADC_JSQR_RK ADC_JSQR_RK
+#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT
+#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR
+#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION
+#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE
+#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM
+#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT
+#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS
+#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN
+#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ
+#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET
+#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET
+#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL
+#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL
+#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET
+#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET
+#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD
+
+#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER
+#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI
+#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
+#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
+#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER
+#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER
+#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE
+
+#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT
+#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT
+#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL
+#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM
+#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET
+#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE
+#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE
+#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER
+
+#define __HAL_ADC_SQR1 ADC_SQR1
+#define __HAL_ADC_SMPR1 ADC_SMPR1
+#define __HAL_ADC_SMPR2 ADC_SMPR2
+#define __HAL_ADC_SQR3_RK ADC_SQR3_RK
+#define __HAL_ADC_SQR2_RK ADC_SQR2_RK
+#define __HAL_ADC_SQR1_RK ADC_SQR1_RK
+#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS
+#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS
+#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV
+#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection
+#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq
+#define __HAL_ADC_JSQR ADC_JSQR
+
+#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL
+#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF
+#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT
+#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS
+#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN
+#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR
+#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT
+#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT
+#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT
+#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1
+#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1
+#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2
+#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2
+#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3
+#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3
+#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4
+#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4
+#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5
+#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5
+#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6
+#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6
+#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7
+#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7
+#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8
+#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8
+
+#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9
+#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9
+#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10
+#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10
+#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11
+#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11
+#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12
+#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12
+#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13
+#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13
+#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14
+#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14
+#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2
+#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2
+
+
+#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15
+#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15
+#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16
+#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16
+#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17
+#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17
+#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC
+#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC
+#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
+#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
+#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
+#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
+#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT
+#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT
+#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT
+#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT
+#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT
+#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT
+#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1
+#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1
+#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1
+#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1
+#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2
+#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#if defined(STM32F3)
+#define COMP_START __HAL_COMP_ENABLE
+#define COMP_STOP __HAL_COMP_DISABLE
+#define COMP_LOCK __HAL_COMP_LOCK
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F302xE) || defined(STM32F302xC)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP7_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP7_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F373xC) ||defined(STM32F378xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+# endif
+#else
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+#endif
+
+#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE
+
+#if defined(STM32L0) || defined(STM32L4)
+/* Note: On these STM32 families, the only argument of this macro */
+/* is COMP_FLAG_LOCK. */
+/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */
+/* argument. */
+#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__))
+#endif
+/**
+ * @}
+ */
+
+#if defined(STM32L0) || defined(STM32L4)
+/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
+#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
+/**
+ * @}
+ */
+#endif
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \
+ ((WAVE) == DAC_WAVE_NOISE)|| \
+ ((WAVE) == DAC_WAVE_TRIANGLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_WRPAREA IS_OB_WRPAREA
+#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM
+#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM
+#define IS_TYPEERASE IS_FLASH_TYPEERASE
+#define IS_NBSECTORS IS_FLASH_NBSECTORS
+#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2
+#define __HAL_I2C_GENERATE_START I2C_GENERATE_START
+#if defined(STM32F1)
+#define __HAL_I2C_FREQ_RANGE I2C_FREQRANGE
+#else
+#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE
+#endif /* STM32F1 */
+#define __HAL_I2C_RISE_TIME I2C_RISE_TIME
+#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD
+#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST
+#define __HAL_I2C_SPEED I2C_SPEED
+#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE
+#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ
+#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS
+#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE
+#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ
+#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB
+#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB
+#define __HAL_I2C_FREQRANGE I2C_FREQRANGE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE
+#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __IRDA_DISABLE __HAL_IRDA_DISABLE
+#define __IRDA_ENABLE __HAL_IRDA_ENABLE
+
+#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
+#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
+#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
+#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
+
+#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS
+#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT
+#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT
+#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD
+#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX
+#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX
+#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX
+#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX
+#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L
+#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H
+#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM
+#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES
+#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX
+#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT
+#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION
+#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE
+#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE
+#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine
+#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig
+#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0)
+#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0)
+#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0)
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention
+#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2
+#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2
+#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB
+#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB
+
+#if defined (STM32F4)
+#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT()
+#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT()
+#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG()
+#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG()
+#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG
+#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT
+#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT
+#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT
+#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG
+#endif /* STM32F4 */
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose
+ * @{
+ */
+
+#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI
+#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI
+
+#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback
+#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
+
+#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE
+#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE
+#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE
+#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE
+#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET
+#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET
+#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE
+#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE
+#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET
+#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET
+#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE
+#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE
+#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE
+#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET
+#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET
+#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE
+#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE
+#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET
+#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET
+#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE
+#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE
+#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE
+#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE
+#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET
+#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET
+#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE
+#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE
+#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE
+#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE
+#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET
+#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET
+#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE
+#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE
+#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET
+#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET
+#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET
+#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET
+#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET
+#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET
+#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET
+#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET
+#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET
+#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET
+#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET
+#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET
+#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET
+#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET
+#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE
+#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE
+#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET
+#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET
+#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE
+#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE
+#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE
+#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE
+#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET
+#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET
+#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE
+#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE
+#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE
+#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE
+#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET
+#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET
+#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE
+#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE
+#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET
+#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET
+#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE
+#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE
+#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE
+#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE
+#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET
+#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET
+#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE
+#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE
+#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET
+#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET
+#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE
+#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE
+#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE
+#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE
+#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET
+#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET
+#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE
+#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE
+#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET
+#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET
+#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE
+#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE
+#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE
+#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE
+#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET
+#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET
+#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE
+#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE
+#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE
+#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE
+#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET
+#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET
+#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE
+#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE
+#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE
+#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE
+#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET
+#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET
+#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE
+#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE
+#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET
+#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET
+#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE
+#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE
+#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE
+#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE
+#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE
+#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE
+#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE
+#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE
+#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE
+#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE
+#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET
+#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET
+#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE
+#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE
+#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET
+#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET
+#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE
+#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE
+#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE
+#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE
+#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE
+#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE
+#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET
+#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET
+#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE
+#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE
+#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE
+#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE
+#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE
+#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE
+#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET
+#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET
+#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE
+#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE
+#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE
+#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE
+#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET
+#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET
+#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE
+#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE
+#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE
+#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE
+#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET
+#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET
+#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE
+#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE
+#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE
+#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE
+#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET
+#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET
+#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE
+#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE
+#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE
+#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE
+#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET
+#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET
+#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE
+#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE
+#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE
+#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE
+#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET
+#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET
+#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE
+#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE
+#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE
+#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE
+#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET
+#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET
+#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE
+#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE
+#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE
+#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE
+#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET
+#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET
+#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE
+#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE
+#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE
+#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE
+#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET
+#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET
+#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE
+#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE
+#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE
+#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE
+#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET
+#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET
+#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE
+#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE
+#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE
+#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE
+#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET
+#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET
+#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE
+#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE
+#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE
+#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE
+#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET
+#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET
+#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE
+#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE
+#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE
+#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE
+#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET
+#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET
+#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE
+#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE
+#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE
+#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE
+#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET
+#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET
+#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE
+#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE
+#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE
+#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE
+#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET
+#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET
+#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE
+#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE
+#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE
+#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE
+#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET
+#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET
+#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE
+#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE
+#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE
+#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE
+#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET
+#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET
+#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE
+#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE
+#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE
+#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE
+#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET
+#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET
+#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE
+#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE
+#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE
+#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE
+#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET
+#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET
+
+#if defined(STM32WB)
+#define __HAL_RCC_QSPI_CLK_DISABLE __HAL_RCC_QUADSPI_CLK_DISABLE
+#define __HAL_RCC_QSPI_CLK_ENABLE __HAL_RCC_QUADSPI_CLK_ENABLE
+#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE
+#define __HAL_RCC_QSPI_FORCE_RESET __HAL_RCC_QUADSPI_FORCE_RESET
+#define __HAL_RCC_QSPI_RELEASE_RESET __HAL_RCC_QUADSPI_RELEASE_RESET
+#define __HAL_RCC_QSPI_IS_CLK_ENABLED __HAL_RCC_QUADSPI_IS_CLK_ENABLED
+#define __HAL_RCC_QSPI_IS_CLK_DISABLED __HAL_RCC_QUADSPI_IS_CLK_DISABLED
+#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED
+#define QSPI_IRQHandler QUADSPI_IRQHandler
+#endif /* __HAL_RCC_QUADSPI_CLK_ENABLE */
+
+#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE
+#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE
+#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE
+#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE
+#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET
+#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET
+#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE
+#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE
+#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE
+#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE
+#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET
+#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET
+#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE
+#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE
+#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE
+#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE
+#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET
+#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET
+#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
+#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
+#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE
+#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE
+#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE
+#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE
+#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET
+#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET
+#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE
+#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE
+#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE
+#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE
+#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET
+#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET
+#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE
+#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE
+#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE
+#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE
+#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET
+#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET
+#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE
+#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE
+#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE
+#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE
+#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET
+#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET
+#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE
+#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE
+#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE
+#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE
+#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE
+#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE
+#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE
+#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE
+#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE
+#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE
+#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET
+#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET
+#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE
+#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE
+#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE
+#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE
+#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET
+#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET
+#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE
+#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE
+#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE
+#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE
+#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET
+#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET
+#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE
+#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE
+#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET
+#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET
+#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE
+#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE
+#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET
+#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET
+#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE
+#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE
+#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET
+#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET
+#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE
+#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE
+#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET
+#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET
+#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE
+#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE
+#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET
+#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET
+#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE
+#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE
+#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE
+#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE
+#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET
+#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET
+#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE
+#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE
+#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE
+#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE
+#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET
+#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET
+#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE
+#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE
+#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE
+#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE
+#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET
+#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET
+#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE
+#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE
+#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE
+#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE
+#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET
+#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET
+#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE
+#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE
+#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE
+#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE
+#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET
+#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET
+#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE
+#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE
+#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE
+#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE
+#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET
+#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET
+#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE
+#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE
+#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE
+#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE
+#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET
+#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET
+#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE
+#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE
+#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE
+#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE
+#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET
+#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET
+#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE
+#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE
+#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE
+#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE
+#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET
+#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET
+#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE
+#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE
+#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE
+#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE
+#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET
+#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET
+#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE
+#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE
+#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET
+#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET
+#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE
+#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE
+#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE
+#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE
+#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET
+#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET
+#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE
+#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE
+#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE
+#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE
+#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET
+#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET
+#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE
+#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE
+#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE
+#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE
+#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET
+#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET
+#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE
+#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE
+#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE
+#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE
+#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET
+#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET
+#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE
+#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE
+#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE
+#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE
+#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET
+#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET
+#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE
+#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE
+#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE
+#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE
+#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET
+#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET
+#define __USART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE
+#define __USART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE
+#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE
+#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE
+#define __USART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET
+#define __USART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET
+#define __USART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE
+#define __USART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE
+#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE
+#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE
+#define __USART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET
+#define __USART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET
+#define __USART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE
+#define __USART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE
+#define __USART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET
+#define __USART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET
+#define __USART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE
+#define __USART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE
+#define __USART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET
+#define __USART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET
+#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE
+#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE
+#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET
+#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE
+#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE
+#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE
+#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE
+#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET
+#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE
+#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE
+#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE
+#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE
+#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET
+#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET
+#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE
+#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE
+#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET
+#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET
+#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE
+#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE
+#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE
+#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE
+#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET
+#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET
+#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE
+#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE
+#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE
+#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE
+#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE
+#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE
+#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET
+#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET
+#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE
+#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE
+
+#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE
+#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE
+#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE
+#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE
+#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE
+#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE
+#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE
+#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE
+#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE
+#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE
+#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE
+#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE
+#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE
+#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET
+#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET
+#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE
+#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE
+#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE
+#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE
+#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE
+#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET
+#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET
+#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE
+#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE
+#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE
+#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE
+#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET
+#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET
+#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE
+#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE
+#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE
+#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE
+#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET
+#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET
+#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE
+#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE
+#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE
+#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE
+#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE
+#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE
+#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE
+#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE
+#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE
+#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE
+#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE
+#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE
+#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE
+#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE
+#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE
+#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE
+#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE
+#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE
+#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE
+#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET
+#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET
+#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE
+#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE
+#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE
+#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE
+#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET
+#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET
+#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE
+#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE
+#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE
+#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE
+#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET
+#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET
+#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE
+#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE
+#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE
+#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE
+#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET
+#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET
+#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE
+#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE
+#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE
+#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE
+#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET
+#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE
+#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE
+#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE
+#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE
+#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE
+#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE
+#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET
+#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET
+#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE
+#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE
+#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE
+#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE
+#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET
+#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET
+#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE
+#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE
+#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE
+#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE
+#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET
+#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET
+#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE
+#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE
+#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED
+#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED
+#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE
+#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE
+#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE
+#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE
+#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE
+#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE
+#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET
+#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET
+#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE
+#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE
+#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
+#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
+#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE
+#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE
+#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET
+#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET
+#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE
+
+/* alias define maintained for legacy */
+#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+
+#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE
+#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE
+#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE
+#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE
+#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE
+#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE
+#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE
+#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE
+#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE
+#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE
+#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE
+#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE
+#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE
+#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE
+#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE
+#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE
+#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE
+#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE
+#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE
+#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE
+
+#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET
+#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET
+#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET
+#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET
+#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET
+#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET
+#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET
+#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET
+#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET
+#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET
+#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET
+#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET
+#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET
+#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET
+#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET
+#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET
+#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET
+#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET
+#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET
+#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET
+
+#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED
+#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED
+#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED
+#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED
+#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED
+#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED
+#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED
+#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED
+#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED
+#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED
+#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED
+#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED
+#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED
+#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED
+#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED
+#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED
+#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED
+#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED
+#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED
+#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED
+#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED
+#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED
+#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED
+#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED
+#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED
+#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED
+#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED
+#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED
+#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED
+#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED
+#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED
+#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED
+#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED
+#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED
+#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED
+#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED
+#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED
+#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED
+#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED
+#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED
+#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED
+#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED
+#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED
+#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED
+#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED
+#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED
+#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED
+#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED
+#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED
+#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED
+#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED
+#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED
+#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED
+#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED
+#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED
+#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED
+#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED
+#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED
+#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED
+#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED
+#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED
+#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED
+#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED
+#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED
+#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED
+#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED
+#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED
+#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED
+#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED
+#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED
+#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED
+#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED
+#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED
+#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED
+#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED
+#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED
+#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED
+#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED
+#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED
+#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED
+#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED
+#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED
+#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED
+#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED
+#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED
+#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED
+#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED
+#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED
+#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED
+#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED
+#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED
+#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED
+#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED
+#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED
+#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED
+#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED
+#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED
+#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED
+#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED
+#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED
+#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED
+#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED
+#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED
+#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED
+#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED
+#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED
+#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED
+#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED
+#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED
+#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED
+#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED
+#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED
+#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED
+#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED
+#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED
+#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED
+
+#if defined(STM32F4)
+#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
+#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
+#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED
+#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED
+#define Sdmmc1ClockSelection SdioClockSelection
+#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO
+#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48
+#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK
+#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG
+#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET
+#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE
+#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED
+#define SdioClockSelection Sdmmc1ClockSelection
+#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1
+#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG
+#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE
+#endif
+
+#if defined(STM32F7)
+#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48
+#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK
+#endif
+
+#if defined(STM32H7)
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() __HAL_RCC_USB1_OTG_HS_FORCE_RESET()
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() __HAL_RCC_USB1_OTG_HS_RELEASE_RESET()
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE()
+
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() __HAL_RCC_USB2_OTG_FS_FORCE_RESET()
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() __HAL_RCC_USB2_OTG_FS_RELEASE_RESET()
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE()
+#endif
+
+#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG
+#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG
+
+#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE
+
+#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE
+#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE
+#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK
+#define IS_RCC_HCLK_DIV IS_RCC_PCLK
+#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK
+
+#define RCC_IT_HSI14 RCC_IT_HSI14RDY
+
+#define RCC_IT_CSSLSE RCC_IT_LSECSS
+#define RCC_IT_CSSHSE RCC_IT_CSS
+
+#define RCC_PLLMUL_3 RCC_PLL_MUL3
+#define RCC_PLLMUL_4 RCC_PLL_MUL4
+#define RCC_PLLMUL_6 RCC_PLL_MUL6
+#define RCC_PLLMUL_8 RCC_PLL_MUL8
+#define RCC_PLLMUL_12 RCC_PLL_MUL12
+#define RCC_PLLMUL_16 RCC_PLL_MUL16
+#define RCC_PLLMUL_24 RCC_PLL_MUL24
+#define RCC_PLLMUL_32 RCC_PLL_MUL32
+#define RCC_PLLMUL_48 RCC_PLL_MUL48
+
+#define RCC_PLLDIV_2 RCC_PLL_DIV2
+#define RCC_PLLDIV_3 RCC_PLL_DIV3
+#define RCC_PLLDIV_4 RCC_PLL_DIV4
+
+#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE
+#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG
+#define RCC_MCO_NODIV RCC_MCODIV_1
+#define RCC_MCO_DIV1 RCC_MCODIV_1
+#define RCC_MCO_DIV2 RCC_MCODIV_2
+#define RCC_MCO_DIV4 RCC_MCODIV_4
+#define RCC_MCO_DIV8 RCC_MCODIV_8
+#define RCC_MCO_DIV16 RCC_MCODIV_16
+#define RCC_MCO_DIV32 RCC_MCODIV_32
+#define RCC_MCO_DIV64 RCC_MCODIV_64
+#define RCC_MCO_DIV128 RCC_MCODIV_128
+#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK
+#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI
+#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE
+#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK
+#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI
+#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14
+#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48
+#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE
+#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2
+
+#if defined(STM32L4)
+#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE
+#elif defined(STM32WB) || defined(STM32G0)
+#else
+#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK
+#endif
+
+#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1
+#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL
+#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI
+#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5
+#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2
+#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3
+
+#define HSION_BitNumber RCC_HSION_BIT_NUMBER
+#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER
+#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER
+#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER
+#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER
+#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER
+#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER
+#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER
+#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER
+#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER
+#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER
+#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER
+#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER
+#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER
+#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER
+#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER
+#define LSION_BitNumber RCC_LSION_BIT_NUMBER
+#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER
+#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER
+#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER
+#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER
+#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER
+#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER
+#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER
+#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER
+#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER
+#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS
+#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS
+#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS
+#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS
+#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE
+#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE
+
+#define CR_HSION_BB RCC_CR_HSION_BB
+#define CR_CSSON_BB RCC_CR_CSSON_BB
+#define CR_PLLON_BB RCC_CR_PLLON_BB
+#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB
+#define CR_MSION_BB RCC_CR_MSION_BB
+#define CSR_LSION_BB RCC_CSR_LSION_BB
+#define CSR_LSEON_BB RCC_CSR_LSEON_BB
+#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB
+#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB
+#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB
+#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB
+#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB
+#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB
+#define CR_HSEON_BB RCC_CR_HSEON_BB
+#define CSR_RMVF_BB RCC_CSR_RMVF_BB
+#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB
+#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB
+
+#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE
+#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE
+#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE
+#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE
+#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE
+
+#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT
+
+#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN
+#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF
+
+#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48
+#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ
+#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP
+#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ
+#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE
+#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48
+
+#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE
+#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE
+#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED
+#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED
+#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET
+#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET
+#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED
+#define DfsdmClockSelection Dfsdm1ClockSelection
+#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1
+#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK
+#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG
+#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE
+#define RCC_DFSDM1CLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_SWPMI1CLKSOURCE_PCLK RCC_SWPMI1CLKSOURCE_PCLK1
+#define RCC_LPTIM1CLKSOURCE_PCLK RCC_LPTIM1CLKSOURCE_PCLK1
+#define RCC_LPTIM2CLKSOURCE_PCLK RCC_LPTIM2CLKSOURCE_PCLK1
+
+#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM1AUDIOCLKSOURCE_I2S1
+#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM1AUDIOCLKSOURCE_I2S2
+#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM2AUDIOCLKSOURCE_I2S1
+#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM2AUDIOCLKSOURCE_I2S2
+#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2
+#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit)
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#if defined (STM32G0)
+#else
+#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
+#endif
+#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT
+#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT
+
+#if defined (STM32F1)
+#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG()
+
+#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT()
+
+#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT()
+
+#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG()
+
+#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
+#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
+#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
+#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
+#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
+#endif /* STM32F1 */
+
+#define IS_ALARM IS_RTC_ALARM
+#define IS_ALARM_MASK IS_RTC_ALARM_MASK
+#define IS_TAMPER IS_RTC_TAMPER
+#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE
+#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER
+#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT
+#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE
+#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION
+#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE
+#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ
+#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION
+#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER
+#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK
+#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER
+
+#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE
+#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE
+#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS
+
+#if defined(STM32F4) || defined(STM32F2)
+#define SD_SDMMC_DISABLED SD_SDIO_DISABLED
+#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY
+#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED
+#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION
+#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND
+#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT
+#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED
+#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE
+#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE
+#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE
+#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL
+#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT
+#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT
+#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG
+#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG
+#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT
+#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT
+#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS
+#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT
+#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND
+/* alias CMSIS */
+#define SDMMC1_IRQn SDIO_IRQn
+#define SDMMC1_IRQHandler SDIO_IRQHandler
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define SD_SDIO_DISABLED SD_SDMMC_DISABLED
+#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY
+#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED
+#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION
+#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND
+#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT
+#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED
+#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE
+#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE
+#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE
+#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE
+#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT
+#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT
+#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG
+#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG
+#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT
+#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT
+#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS
+#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT
+#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND
+/* alias CMSIS for compatibilities */
+#define SDIO_IRQn SDMMC1_IRQn
+#define SDIO_IRQHandler SDMMC1_IRQHandler
+#endif
+
+#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2)
+#define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef
+#define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef
+#define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef
+#define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef
+#endif
+
+#if defined(STM32H7)
+#define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback HAL_MMCEx_Read_DMADoubleBuf0CpltCallback
+#define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback HAL_MMCEx_Read_DMADoubleBuf1CpltCallback
+#define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback HAL_MMCEx_Write_DMADoubleBuf0CpltCallback
+#define HAL_MMCEx_Write_DMADoubleBuffer1CpltCallback HAL_MMCEx_Write_DMADoubleBuf1CpltCallback
+#define HAL_SDEx_Read_DMADoubleBuffer0CpltCallback HAL_SDEx_Read_DMADoubleBuf0CpltCallback
+#define HAL_SDEx_Read_DMADoubleBuffer1CpltCallback HAL_SDEx_Read_DMADoubleBuf1CpltCallback
+#define HAL_SDEx_Write_DMADoubleBuffer0CpltCallback HAL_SDEx_Write_DMADoubleBuf0CpltCallback
+#define HAL_SDEx_Write_DMADoubleBuffer1CpltCallback HAL_SDEx_Write_DMADoubleBuf1CpltCallback
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT
+#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT
+#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE
+#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE
+#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE
+#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE
+
+#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
+#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
+
+#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1
+#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2
+#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START
+#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH
+#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR
+#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE
+#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE
+#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_SPI_1LINE_TX SPI_1LINE_TX
+#define __HAL_SPI_1LINE_RX SPI_1LINE_RX
+#define __HAL_SPI_RESET_CRC SPI_RESET_CRC
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
+#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION
+#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
+#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION
+
+#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD
+
+#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE
+#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT
+#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT
+#define __USART_ENABLE __HAL_USART_ENABLE
+#define __USART_DISABLE __HAL_USART_DISABLE
+
+#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
+#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE
+
+#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE
+#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE
+#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+
+#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup
+#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup
+
+#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo
+#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE
+#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE
+
+#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
+#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT
+
+#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
+
+#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN
+#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER
+#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER
+#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER
+#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD
+#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD
+#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION
+#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION
+#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER
+#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER
+#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE
+#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE
+
+#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG
+#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER
+
+#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE
+#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE
+#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_LTDC_LAYER LTDC_LAYER
+#if defined(STM32F7)
+#else
+#define __HAL_LTDC_RELOAD_CONFIG __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE
+#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE
+#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE
+#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE
+#define SAI_STREOMODE SAI_STEREOMODE
+#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY
+#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL
+#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL
+#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL
+#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL
+#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL
+#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE
+#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1
+#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPDIFRX_Aliased_Macros HAL SPDIFRX Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#if defined(STM32H7)
+#define HAL_SPDIFRX_ReceiveControlFlow HAL_SPDIFRX_ReceiveCtrlFlow
+#define HAL_SPDIFRX_ReceiveControlFlow_IT HAL_SPDIFRX_ReceiveCtrlFlow_IT
+#define HAL_SPDIFRX_ReceiveControlFlow_DMA HAL_SPDIFRX_ReceiveCtrlFlow_DMA
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32_HAL_LEGACY */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h
new file mode 100644
index 00000000..2035c367
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h
@@ -0,0 +1,281 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal.h
+ * @author MCD Application Team
+ * @brief This file contains all the functions prototypes for the HAL
+ * module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_H
+#define __STM32F7xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_conf.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HAL
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Constants HAL Exported Constants
+ * @{
+ */
+
+/** @defgroup HAL_TICK_FREQ Tick Frequency
+ * @{
+ */
+typedef enum
+{
+ HAL_TICK_FREQ_10HZ = 100U,
+ HAL_TICK_FREQ_100HZ = 10U,
+ HAL_TICK_FREQ_1KHZ = 1U,
+ HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ
+} HAL_TickFreqTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup SYSCFG_BootMode Boot Mode
+ * @{
+ */
+#define SYSCFG_MEM_BOOT_ADD0 ((uint32_t)0x00000000U)
+#define SYSCFG_MEM_BOOT_ADD1 SYSCFG_MEMRMP_MEM_BOOT
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HAL_Exported_Macros HAL Exported Macros
+ * @{
+ */
+
+/** @brief Freeze/Unfreeze Peripherals in Debug mode
+ */
+#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_DBGMCU_FREEZE_LPTIM1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_LPTIM1_STOP))
+#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_I2C4_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_CAN1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP))
+#define __HAL_DBGMCU_FREEZE_CAN2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM9() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM10() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM11() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP))
+
+#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_DBGMCU_UNFREEZE_LPTIM1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_LPTIM1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C4_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_CAN1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_CAN2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM9() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM10() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM11() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP))
+
+
+/** @brief FMC (NOR/RAM) mapped at 0x60000000 and SDRAM mapped at 0xC0000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_FMC() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_SWP_FMC))
+
+
+/** @brief FMC/SDRAM mapped at 0x60000000 (NOR/RAM) mapped at 0xC0000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_SWP_FMC);\
+ SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_SWP_FMC_0);\
+ }while(0);
+/**
+ * @brief Return the memory boot mapping as configured by user.
+ * @retval The boot mode as configured by user. The returned value can be one
+ * of the following values:
+ * @arg @ref SYSCFG_MEM_BOOT_ADD0
+ * @arg @ref SYSCFG_MEM_BOOT_ADD1
+ */
+#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_BOOT)
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/** @brief SYSCFG Break Cortex-M7 Lockup lock.
+ * Enable and lock the connection of Cortex-M7 LOCKUP (Hardfault) output to TIM1/8 Break input.
+ * @note The selected configuration is locked and can be unlocked only by system reset.
+ */
+#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() SET_BIT(SYSCFG->CBR, SYSCFG_CBR_CLL)
+
+/** @brief SYSCFG Break PVD lock.
+ * Enable and lock the PVD connection to Timer1/8 Break input, as well as the PVDE and PLS[2:0] in the PWR_CR1 register.
+ * @note The selected configuration is locked and can be unlocked only by system reset.
+ */
+#define __HAL_SYSCFG_BREAK_PVD_LOCK() SET_BIT(SYSCFG->CBR, SYSCFG_CBR_PVDL)
+#endif /* STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Private_Macros HAL Private Macros
+ * @{
+ */
+#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \
+ ((FREQ) == HAL_TICK_FREQ_100HZ) || \
+ ((FREQ) == HAL_TICK_FREQ_1KHZ))
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HAL_Exported_Functions
+ * @{
+ */
+/** @addtogroup HAL_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and Configuration functions ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority);
+/**
+ * @}
+ */
+
+/** @addtogroup HAL_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+void HAL_IncTick(void);
+void HAL_Delay(uint32_t Delay);
+uint32_t HAL_GetTick(void);
+uint32_t HAL_GetTickPrio(void);
+HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
+HAL_TickFreqTypeDef HAL_GetTickFreq(void);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+uint32_t HAL_GetUIDw0(void);
+uint32_t HAL_GetUIDw1(void);
+uint32_t HAL_GetUIDw2(void);
+void HAL_DBGMCU_EnableDBGSleepMode(void);
+void HAL_DBGMCU_DisableDBGSleepMode(void);
+void HAL_DBGMCU_EnableDBGStopMode(void);
+void HAL_DBGMCU_DisableDBGStopMode(void);
+void HAL_DBGMCU_EnableDBGStandbyMode(void);
+void HAL_DBGMCU_DisableDBGStandbyMode(void);
+void HAL_EnableCompensationCell(void);
+void HAL_DisableCompensationCell(void);
+void HAL_EnableFMCMemorySwapping(void);
+void HAL_DisableFMCMemorySwapping(void);
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+void HAL_EnableMemorySwappingBank(void);
+void HAL_DisableMemorySwappingBank(void);
+#endif /* STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Variables HAL Private Variables
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Constants HAL Private Constants
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h
new file mode 100644
index 00000000..699f074a
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h
@@ -0,0 +1,422 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_cortex.h
+ * @author MCD Application Team
+ * @brief Header file of CORTEX HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_CORTEX_H
+#define __STM32F7xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CORTEX
+ * @{
+ */
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CORTEX_Exported_Types Cortex Exported Types
+ * @{
+ */
+
+#if (__MPU_PRESENT == 1)
+/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
+ * @brief MPU Region initialization structure
+ * @{
+ */
+typedef struct
+{
+ uint8_t Enable; /*!< Specifies the status of the region.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Enable */
+ uint8_t Number; /*!< Specifies the number of the region to protect.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Number */
+ uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */
+ uint8_t Size; /*!< Specifies the size of the region to protect.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Size */
+ uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint8_t TypeExtField; /*!< Specifies the TEX field level.
+ This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */
+ uint8_t AccessPermission; /*!< Specifies the region access permission type.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */
+ uint8_t DisableExec; /*!< Specifies the instruction access status.
+ This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */
+ uint8_t IsShareable; /*!< Specifies the shareability status of the protected region.
+ This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */
+ uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected.
+ This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */
+ uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region.
+ This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */
+}MPU_Region_InitTypeDef;
+/**
+ * @}
+ */
+#endif /* __MPU_PRESENT */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
+ * @{
+ */
+
+/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
+ * @{
+ */
+#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007U) /*!< 0 bits for pre-emption priority
+ 4 bits for subpriority */
+#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006U) /*!< 1 bits for pre-emption priority
+ 3 bits for subpriority */
+#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005U) /*!< 2 bits for pre-emption priority
+ 2 bits for subpriority */
+#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004U) /*!< 3 bits for pre-emption priority
+ 1 bits for subpriority */
+#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003U) /*!< 4 bits for pre-emption priority
+ 0 bits for subpriority */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source
+ * @{
+ */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000U)
+#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004U)
+
+/**
+ * @}
+ */
+
+#if (__MPU_PRESENT == 1)
+/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
+ * @{
+ */
+#define MPU_HFNMI_PRIVDEF_NONE ((uint32_t)0x00000000U)
+#define MPU_HARDFAULT_NMI ((uint32_t)0x00000002U)
+#define MPU_PRIVILEGED_DEFAULT ((uint32_t)0x00000004U)
+#define MPU_HFNMI_PRIVDEF ((uint32_t)0x00000006U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
+ * @{
+ */
+#define MPU_REGION_ENABLE ((uint8_t)0x01U)
+#define MPU_REGION_DISABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
+ * @{
+ */
+#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00U)
+#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
+ * @{
+ */
+#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01U)
+#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
+ * @{
+ */
+#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01U)
+#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
+ * @{
+ */
+#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01U)
+#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
+ * @{
+ */
+#define MPU_TEX_LEVEL0 ((uint8_t)0x00U)
+#define MPU_TEX_LEVEL1 ((uint8_t)0x01U)
+#define MPU_TEX_LEVEL2 ((uint8_t)0x02U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
+ * @{
+ */
+#define MPU_REGION_SIZE_32B ((uint8_t)0x04U)
+#define MPU_REGION_SIZE_64B ((uint8_t)0x05U)
+#define MPU_REGION_SIZE_128B ((uint8_t)0x06U)
+#define MPU_REGION_SIZE_256B ((uint8_t)0x07U)
+#define MPU_REGION_SIZE_512B ((uint8_t)0x08U)
+#define MPU_REGION_SIZE_1KB ((uint8_t)0x09U)
+#define MPU_REGION_SIZE_2KB ((uint8_t)0x0AU)
+#define MPU_REGION_SIZE_4KB ((uint8_t)0x0BU)
+#define MPU_REGION_SIZE_8KB ((uint8_t)0x0CU)
+#define MPU_REGION_SIZE_16KB ((uint8_t)0x0DU)
+#define MPU_REGION_SIZE_32KB ((uint8_t)0x0EU)
+#define MPU_REGION_SIZE_64KB ((uint8_t)0x0FU)
+#define MPU_REGION_SIZE_128KB ((uint8_t)0x10U)
+#define MPU_REGION_SIZE_256KB ((uint8_t)0x11U)
+#define MPU_REGION_SIZE_512KB ((uint8_t)0x12U)
+#define MPU_REGION_SIZE_1MB ((uint8_t)0x13U)
+#define MPU_REGION_SIZE_2MB ((uint8_t)0x14U)
+#define MPU_REGION_SIZE_4MB ((uint8_t)0x15U)
+#define MPU_REGION_SIZE_8MB ((uint8_t)0x16U)
+#define MPU_REGION_SIZE_16MB ((uint8_t)0x17U)
+#define MPU_REGION_SIZE_32MB ((uint8_t)0x18U)
+#define MPU_REGION_SIZE_64MB ((uint8_t)0x19U)
+#define MPU_REGION_SIZE_128MB ((uint8_t)0x1AU)
+#define MPU_REGION_SIZE_256MB ((uint8_t)0x1BU)
+#define MPU_REGION_SIZE_512MB ((uint8_t)0x1CU)
+#define MPU_REGION_SIZE_1GB ((uint8_t)0x1DU)
+#define MPU_REGION_SIZE_2GB ((uint8_t)0x1EU)
+#define MPU_REGION_SIZE_4GB ((uint8_t)0x1FU)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes
+ * @{
+ */
+#define MPU_REGION_NO_ACCESS ((uint8_t)0x00U)
+#define MPU_REGION_PRIV_RW ((uint8_t)0x01U)
+#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02U)
+#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03U)
+#define MPU_REGION_PRIV_RO ((uint8_t)0x05U)
+#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
+ * @{
+ */
+#define MPU_REGION_NUMBER0 ((uint8_t)0x00U)
+#define MPU_REGION_NUMBER1 ((uint8_t)0x01U)
+#define MPU_REGION_NUMBER2 ((uint8_t)0x02U)
+#define MPU_REGION_NUMBER3 ((uint8_t)0x03U)
+#define MPU_REGION_NUMBER4 ((uint8_t)0x04U)
+#define MPU_REGION_NUMBER5 ((uint8_t)0x05U)
+#define MPU_REGION_NUMBER6 ((uint8_t)0x06U)
+#define MPU_REGION_NUMBER7 ((uint8_t)0x07U)
+/**
+ * @}
+ */
+#endif /* __MPU_PRESENT */
+
+/**
+ * @}
+ */
+
+
+/* Exported Macros -----------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CORTEX_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup CORTEX_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+/**
+ * @}
+ */
+
+/** @addtogroup CORTEX_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+#if (__MPU_PRESENT == 1)
+void HAL_MPU_Enable(uint32_t MPU_Control);
+void HAL_MPU_Disable(void);
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
+#endif /* __MPU_PRESENT */
+uint32_t HAL_NVIC_GetPriorityGrouping(void);
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
+ * @{
+ */
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_1) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_2) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_3) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
+
+#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x00)
+
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+ ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+
+#if (__MPU_PRESENT == 1)
+#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
+ ((STATE) == MPU_REGION_DISABLE))
+
+#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
+ ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
+
+#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \
+ ((STATE) == MPU_ACCESS_NOT_SHAREABLE))
+
+#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \
+ ((STATE) == MPU_ACCESS_NOT_CACHEABLE))
+
+#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \
+ ((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
+
+#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \
+ ((TYPE) == MPU_TEX_LEVEL1) || \
+ ((TYPE) == MPU_TEX_LEVEL2))
+
+#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \
+ ((TYPE) == MPU_REGION_PRIV_RW) || \
+ ((TYPE) == MPU_REGION_PRIV_RW_URO) || \
+ ((TYPE) == MPU_REGION_FULL_ACCESS) || \
+ ((TYPE) == MPU_REGION_PRIV_RO) || \
+ ((TYPE) == MPU_REGION_PRIV_RO_URO))
+
+#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \
+ ((NUMBER) == MPU_REGION_NUMBER1) || \
+ ((NUMBER) == MPU_REGION_NUMBER2) || \
+ ((NUMBER) == MPU_REGION_NUMBER3) || \
+ ((NUMBER) == MPU_REGION_NUMBER4) || \
+ ((NUMBER) == MPU_REGION_NUMBER5) || \
+ ((NUMBER) == MPU_REGION_NUMBER6) || \
+ ((NUMBER) == MPU_REGION_NUMBER7))
+
+#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \
+ ((SIZE) == MPU_REGION_SIZE_64B) || \
+ ((SIZE) == MPU_REGION_SIZE_128B) || \
+ ((SIZE) == MPU_REGION_SIZE_256B) || \
+ ((SIZE) == MPU_REGION_SIZE_512B) || \
+ ((SIZE) == MPU_REGION_SIZE_1KB) || \
+ ((SIZE) == MPU_REGION_SIZE_2KB) || \
+ ((SIZE) == MPU_REGION_SIZE_4KB) || \
+ ((SIZE) == MPU_REGION_SIZE_8KB) || \
+ ((SIZE) == MPU_REGION_SIZE_16KB) || \
+ ((SIZE) == MPU_REGION_SIZE_32KB) || \
+ ((SIZE) == MPU_REGION_SIZE_64KB) || \
+ ((SIZE) == MPU_REGION_SIZE_128KB) || \
+ ((SIZE) == MPU_REGION_SIZE_256KB) || \
+ ((SIZE) == MPU_REGION_SIZE_512KB) || \
+ ((SIZE) == MPU_REGION_SIZE_1MB) || \
+ ((SIZE) == MPU_REGION_SIZE_2MB) || \
+ ((SIZE) == MPU_REGION_SIZE_4MB) || \
+ ((SIZE) == MPU_REGION_SIZE_8MB) || \
+ ((SIZE) == MPU_REGION_SIZE_16MB) || \
+ ((SIZE) == MPU_REGION_SIZE_32MB) || \
+ ((SIZE) == MPU_REGION_SIZE_64MB) || \
+ ((SIZE) == MPU_REGION_SIZE_128MB) || \
+ ((SIZE) == MPU_REGION_SIZE_256MB) || \
+ ((SIZE) == MPU_REGION_SIZE_512MB) || \
+ ((SIZE) == MPU_REGION_SIZE_1GB) || \
+ ((SIZE) == MPU_REGION_SIZE_2GB) || \
+ ((SIZE) == MPU_REGION_SIZE_4GB))
+
+#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FFU)
+#endif /* __MPU_PRESENT */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_CORTEX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h
new file mode 100644
index 00000000..2aa3123d
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h
@@ -0,0 +1,221 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_def.h
+ * @author MCD Application Team
+ * @brief This file contains HAL common defines, enumeration, macros and
+ * structures definitions.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_DEF
+#define __STM32F7xx_HAL_DEF
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx.h"
+#include "Legacy/stm32_hal_legacy.h"
+#include
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL Status structures definition
+ */
+typedef enum
+{
+ HAL_OK = 0x00U,
+ HAL_ERROR = 0x01U,
+ HAL_BUSY = 0x02U,
+ HAL_TIMEOUT = 0x03U
+} HAL_StatusTypeDef;
+
+/**
+ * @brief HAL Lock structures definition
+ */
+typedef enum
+{
+ HAL_UNLOCKED = 0x00U,
+ HAL_LOCKED = 0x01U
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+
+#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */
+
+#define HAL_MAX_DELAY 0xFFFFFFFFU
+
+#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != RESET)
+#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == RESET)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
+ do{ \
+ (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
+ (__DMA_HANDLE__).Parent = (__HANDLE__); \
+ } while(0)
+
+/** @brief Reset the Handle's State field.
+ * @param __HANDLE__ specifies the Peripheral Handle.
+ * @note This macro can be used for the following purpose:
+ * - When the Handle is declared as local variable; before passing it as parameter
+ * to HAL_PPP_Init() for the first time, it is mandatory to use this macro
+ * to set to 0 the Handle's "State" field.
+ * Otherwise, "State" field may have any random value and the first time the function
+ * HAL_PPP_Init() is called, the low level hardware initialization will be missed
+ * (i.e. HAL_PPP_MspInit() will not be executed).
+ * - When there is a need to reconfigure the low level hardware: instead of calling
+ * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+ * In this later function, when the Handle's "State" field is set to 0, it will execute the function
+ * HAL_PPP_MspInit() which will reconfigure the low level hardware.
+ * @retval None
+ */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
+
+#if (USE_RTOS == 1U)
+ /* Reserved for future use */
+ #error "USE_RTOS should be 0 in the current HAL release"
+#else
+ #define __HAL_LOCK(__HANDLE__) \
+ do{ \
+ if((__HANDLE__)->Lock == HAL_LOCKED) \
+ { \
+ return HAL_BUSY; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Lock = HAL_LOCKED; \
+ } \
+ }while (0U)
+
+ #define __HAL_UNLOCK(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Lock = HAL_UNLOCKED; \
+ }while (0U)
+#endif /* USE_RTOS */
+
+#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
+ #ifndef __weak
+ #define __weak __attribute__((weak))
+ #endif /* __weak */
+ #ifndef __packed
+ #define __packed __attribute__((__packed__))
+ #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
+ #ifndef __ALIGN_END
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #define __ALIGN_BEGIN
+ #endif /* __ALIGN_BEGIN */
+#else
+ #ifndef __ALIGN_END
+ #define __ALIGN_END
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #endif /* __CC_ARM */
+ #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+/* Macro to get variable aligned on 32-bytes,needed for cache maintenance purpose */
+#if defined (__GNUC__) /* GNU Compiler */
+ #define ALIGN_32BYTES(buf) buf __attribute__ ((aligned (32)))
+#elif defined (__ICCARM__) /* IAR Compiler */
+ #define ALIGN_32BYTES(buf) _Pragma("data_alignment=32") buf
+#elif defined (__CC_ARM) /* ARM Compiler */
+ #define ALIGN_32BYTES(buf) __align(32) buf
+#endif
+
+/**
+ * @brief __RAM_FUNC definition
+ */
+#if defined ( __CC_ARM )
+/* ARM Compiler
+ ------------
+ RAM functions are defined using the toolchain options.
+ Functions that are executed in RAM should reside in a separate source module.
+ Using the 'Options for File' dialog you can simply change the 'Code / Const'
+ area of a module to a memory space in physical RAM.
+ Available memory areas are declared in the 'Target' tab of the 'Options for Target'
+ dialog.
+*/
+#define __RAM_FUNC
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+ RAM functions are defined using a specific toolchain keyword "__ramfunc".
+*/
+#define __RAM_FUNC __ramfunc
+
+#elif defined ( __GNUC__ )
+/* GNU Compiler
+ ------------
+ RAM functions are defined using a specific toolchain attribute
+ "__attribute__((section(".RamFunc")))".
+*/
+#define __RAM_FUNC __attribute__((section(".RamFunc")))
+
+#endif
+
+/**
+ * @brief __NOINLINE definition
+ */
+#if defined ( __CC_ARM ) || defined ( __GNUC__ )
+/* ARM & GNUCompiler
+ ----------------
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F7xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h
new file mode 100644
index 00000000..dfe6ff58
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h
@@ -0,0 +1,765 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_dma.h
+ * @author MCD Application Team
+ * @brief Header file of DMA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_DMA_H
+#define __STM32F7xx_HAL_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Types DMA Exported Types
+ * @brief DMA Exported Types
+ * @{
+ */
+
+/**
+ * @brief DMA Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Channel; /*!< Specifies the channel used for the specified stream.
+ This parameter can be a value of @ref DMAEx_Channel_selection */
+
+ uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
+ from memory to memory or from peripheral to memory.
+ This parameter can be a value of @ref DMA_Data_transfer_direction */
+
+ uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
+
+ uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Memory_incremented_mode */
+
+ uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
+ This parameter can be a value of @ref DMA_Peripheral_data_size */
+
+ uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
+ This parameter can be a value of @ref DMA_Memory_data_size */
+
+ uint32_t Mode; /*!< Specifies the operation mode of the DMAy Streamx.
+ This parameter can be a value of @ref DMA_mode
+ @note The circular buffer mode cannot be used if the memory-to-memory
+ data transfer is configured on the selected Stream */
+
+ uint32_t Priority; /*!< Specifies the software priority for the DMAy Streamx.
+ This parameter can be a value of @ref DMA_Priority_level */
+
+ uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream.
+ This parameter can be a value of @ref DMA_FIFO_direct_mode
+ @note The Direct mode (FIFO mode disabled) cannot be used if the
+ memory-to-memory data transfer is configured on the selected stream */
+
+ uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level.
+ This parameter can be a value of @ref DMA_FIFO_threshold_level */
+
+ uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers.
+ It specifies the amount of data to be transferred in a single non interruptible
+ transaction.
+ This parameter can be a value of @ref DMA_Memory_burst
+ @note The burst mode is possible only if the address Increment mode is enabled. */
+
+ uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers.
+ It specifies the amount of data to be transferred in a single non interruptible
+ transaction.
+ This parameter can be a value of @ref DMA_Peripheral_burst
+ @note The burst mode is possible only if the address Increment mode is enabled. */
+}DMA_InitTypeDef;
+
+/**
+ * @brief HAL DMA State structures definition
+ */
+typedef enum
+{
+ HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */
+ HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */
+ HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */
+ HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */
+ HAL_DMA_STATE_ERROR = 0x04U, /*!< DMA error state */
+ HAL_DMA_STATE_ABORT = 0x05U, /*!< DMA Abort state */
+}HAL_DMA_StateTypeDef;
+
+/**
+ * @brief HAL DMA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */
+ HAL_DMA_HALF_TRANSFER = 0x01U, /*!< Half Transfer */
+}HAL_DMA_LevelCompleteTypeDef;
+
+/**
+ * @brief HAL DMA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */
+ HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half Transfer */
+ HAL_DMA_XFER_M1CPLT_CB_ID = 0x02U, /*!< M1 Full Transfer */
+ HAL_DMA_XFER_M1HALFCPLT_CB_ID = 0x03U, /*!< M1 Half Transfer */
+ HAL_DMA_XFER_ERROR_CB_ID = 0x04U, /*!< Error */
+ HAL_DMA_XFER_ABORT_CB_ID = 0x05U, /*!< Abort */
+ HAL_DMA_XFER_ALL_CB_ID = 0x06U /*!< All */
+}HAL_DMA_CallbackIDTypeDef;
+
+/**
+ * @brief DMA handle Structure definition
+ */
+typedef struct __DMA_HandleTypeDef
+{
+ DMA_Stream_TypeDef *Instance; /*!< Register base address */
+
+ DMA_InitTypeDef Init; /*!< DMA communication parameters */
+
+ HAL_LockTypeDef Lock; /*!< DMA locking object */
+
+ __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
+
+ void *Parent; /*!< Parent object state */
+
+ void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
+
+ void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
+
+ void (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete Memory1 callback */
+
+ void (* XferM1HalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Half complete Memory1 callback */
+
+ void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
+
+ void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Abort callback */
+
+ __IO uint32_t ErrorCode; /*!< DMA Error code */
+
+ uint32_t StreamBaseAddress; /*!< DMA Stream Base Address */
+
+ uint32_t StreamIndex; /*!< DMA Stream Index */
+
+}DMA_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Constants DMA Exported Constants
+ * @brief DMA Exported constants
+ * @{
+ */
+
+/** @defgroup DMA_Error_Code DMA Error Code
+ * @brief DMA Error Code
+ * @{
+ */
+#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */
+#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */
+#define HAL_DMA_ERROR_FE 0x00000002U /*!< FIFO error */
+#define HAL_DMA_ERROR_DME 0x00000004U /*!< Direct Mode error */
+#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */
+#define HAL_DMA_ERROR_PARAM 0x00000040U /*!< Parameter error */
+#define HAL_DMA_ERROR_NO_XFER 0x00000080U /*!< Abort requested with no Xfer ongoing */
+#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
+ * @brief DMA data transfer direction
+ * @{
+ */
+#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH DMA_SxCR_DIR_0 /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY DMA_SxCR_DIR_1 /*!< Memory to memory direction */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
+ * @brief DMA peripheral incremented mode
+ * @{
+ */
+#define DMA_PINC_ENABLE DMA_SxCR_PINC /*!< Peripheral increment mode enable */
+#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
+ * @brief DMA memory incremented mode
+ * @{
+ */
+#define DMA_MINC_ENABLE DMA_SxCR_MINC /*!< Memory increment mode enable */
+#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
+ * @brief DMA peripheral data size
+ * @{
+ */
+#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment: Byte */
+#define DMA_PDATAALIGN_HALFWORD DMA_SxCR_PSIZE_0 /*!< Peripheral data alignment: HalfWord */
+#define DMA_PDATAALIGN_WORD DMA_SxCR_PSIZE_1 /*!< Peripheral data alignment: Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_data_size DMA Memory data size
+ * @brief DMA memory data size
+ * @{
+ */
+#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment: Byte */
+#define DMA_MDATAALIGN_HALFWORD DMA_SxCR_MSIZE_0 /*!< Memory data alignment: HalfWord */
+#define DMA_MDATAALIGN_WORD DMA_SxCR_MSIZE_1 /*!< Memory data alignment: Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_mode DMA mode
+ * @brief DMA mode
+ * @{
+ */
+#define DMA_NORMAL 0x00000000U /*!< Normal mode */
+#define DMA_CIRCULAR DMA_SxCR_CIRC /*!< Circular mode */
+#define DMA_PFCTRL DMA_SxCR_PFCTRL /*!< Peripheral flow control mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Priority_level DMA Priority level
+ * @brief DMA priority levels
+ * @{
+ */
+#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level: Low */
+#define DMA_PRIORITY_MEDIUM DMA_SxCR_PL_0 /*!< Priority level: Medium */
+#define DMA_PRIORITY_HIGH DMA_SxCR_PL_1 /*!< Priority level: High */
+#define DMA_PRIORITY_VERY_HIGH DMA_SxCR_PL /*!< Priority level: Very High */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode
+ * @brief DMA FIFO direct mode
+ * @{
+ */
+#define DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */
+#define DMA_FIFOMODE_ENABLE DMA_SxFCR_DMDIS /*!< FIFO mode enable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level
+ * @brief DMA FIFO level
+ * @{
+ */
+#define DMA_FIFO_THRESHOLD_1QUARTERFULL 0x00000000U /*!< FIFO threshold 1 quart full configuration */
+#define DMA_FIFO_THRESHOLD_HALFFULL DMA_SxFCR_FTH_0 /*!< FIFO threshold half full configuration */
+#define DMA_FIFO_THRESHOLD_3QUARTERSFULL DMA_SxFCR_FTH_1 /*!< FIFO threshold 3 quarts full configuration */
+#define DMA_FIFO_THRESHOLD_FULL DMA_SxFCR_FTH /*!< FIFO threshold full configuration */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_burst DMA Memory burst
+ * @brief DMA memory burst
+ * @{
+ */
+#define DMA_MBURST_SINGLE 0x00000000U
+#define DMA_MBURST_INC4 DMA_SxCR_MBURST_0
+#define DMA_MBURST_INC8 DMA_SxCR_MBURST_1
+#define DMA_MBURST_INC16 DMA_SxCR_MBURST
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_burst DMA Peripheral burst
+ * @brief DMA peripheral burst
+ * @{
+ */
+#define DMA_PBURST_SINGLE 0x00000000U
+#define DMA_PBURST_INC4 DMA_SxCR_PBURST_0
+#define DMA_PBURST_INC8 DMA_SxCR_PBURST_1
+#define DMA_PBURST_INC16 DMA_SxCR_PBURST
+/**
+ * @}
+ */
+
+/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
+ * @brief DMA interrupts definition
+ * @{
+ */
+#define DMA_IT_TC DMA_SxCR_TCIE
+#define DMA_IT_HT DMA_SxCR_HTIE
+#define DMA_IT_TE DMA_SxCR_TEIE
+#define DMA_IT_DME DMA_SxCR_DMEIE
+#define DMA_IT_FE 0x00000080U
+/**
+ * @}
+ */
+
+/** @defgroup DMA_flag_definitions DMA flag definitions
+ * @brief DMA flag definitions
+ * @{
+ */
+#define DMA_FLAG_FEIF0_4 0x00000001U
+#define DMA_FLAG_DMEIF0_4 0x00000004U
+#define DMA_FLAG_TEIF0_4 0x00000008U
+#define DMA_FLAG_HTIF0_4 0x00000010U
+#define DMA_FLAG_TCIF0_4 0x00000020U
+#define DMA_FLAG_FEIF1_5 0x00000040U
+#define DMA_FLAG_DMEIF1_5 0x00000100U
+#define DMA_FLAG_TEIF1_5 0x00000200U
+#define DMA_FLAG_HTIF1_5 0x00000400U
+#define DMA_FLAG_TCIF1_5 0x00000800U
+#define DMA_FLAG_FEIF2_6 0x00010000U
+#define DMA_FLAG_DMEIF2_6 0x00040000U
+#define DMA_FLAG_TEIF2_6 0x00080000U
+#define DMA_FLAG_HTIF2_6 0x00100000U
+#define DMA_FLAG_TCIF2_6 0x00200000U
+#define DMA_FLAG_FEIF3_7 0x00400000U
+#define DMA_FLAG_DMEIF3_7 0x01000000U
+#define DMA_FLAG_TEIF3_7 0x02000000U
+#define DMA_FLAG_HTIF3_7 0x04000000U
+#define DMA_FLAG_TCIF3_7 0x08000000U
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset DMA handle state
+ * @param __HANDLE__ specifies the DMA handle.
+ * @retval None
+ */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+ * @brief Return the current DMA Stream FIFO filled level.
+ * @param __HANDLE__ DMA handle
+ * @retval The FIFO filling state.
+ * - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full
+ * and not empty.
+ * - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full.
+ * - DMA_FIFOStatus_HalfFull: if more than 1 half-full.
+ * - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full.
+ * - DMA_FIFOStatus_Empty: when FIFO is empty
+ * - DMA_FIFOStatus_Full: when FIFO is full
+ */
+#define __HAL_DMA_GET_FS(__HANDLE__) (((__HANDLE__)->Instance->FCR & (DMA_SxFCR_FS)))
+
+/**
+ * @brief Enable the specified DMA Stream.
+ * @param __HANDLE__ DMA handle
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA_SxCR_EN)
+
+/**
+ * @brief Disable the specified DMA Stream.
+ * @param __HANDLE__ DMA handle
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA_SxCR_EN)
+
+/* Interrupt & Flag management */
+
+/**
+ * @brief Return the current DMA Stream transfer complete flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\
+ DMA_FLAG_TCIF3_7)
+
+/**
+ * @brief Return the current DMA Stream half transfer complete flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\
+ DMA_FLAG_HTIF3_7)
+
+/**
+ * @brief Return the current DMA Stream transfer error flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\
+ DMA_FLAG_TEIF3_7)
+
+/**
+ * @brief Return the current DMA Stream FIFO error flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified FIFO error flag index.
+ */
+#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\
+ DMA_FLAG_FEIF3_7)
+
+/**
+ * @brief Return the current DMA Stream direct mode error flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified direct mode error flag index.
+ */
+#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\
+ DMA_FLAG_DMEIF3_7)
+
+/**
+ * @brief Get the DMA Stream pending flags.
+ * @param __HANDLE__ DMA handle
+ * @param __FLAG__ Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCIFx: Transfer complete flag.
+ * @arg DMA_FLAG_HTIFx: Half transfer complete flag.
+ * @arg DMA_FLAG_TEIFx: Transfer error flag.
+ * @arg DMA_FLAG_DMEIFx: Direct mode error flag.
+ * @arg DMA_FLAG_FEIFx: FIFO error flag.
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__)))
+
+/**
+ * @brief Clear the DMA Stream pending flags.
+ * @param __HANDLE__ DMA handle
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCIFx: Transfer complete flag.
+ * @arg DMA_FLAG_HTIFx: Half transfer complete flag.
+ * @arg DMA_FLAG_TEIFx: Transfer error flag.
+ * @arg DMA_FLAG_DMEIFx: Direct mode error flag.
+ * @arg DMA_FLAG_FEIFx: FIFO error flag.
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__)))
+
+/**
+ * @brief Enable the specified DMA Stream interrupts.
+ * @param __HANDLE__ DMA handle
+ * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask.
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask.
+ * @arg DMA_IT_TE: Transfer error interrupt mask.
+ * @arg DMA_IT_FE: FIFO error interrupt mask.
+ * @arg DMA_IT_DME: Direct mode error interrupt.
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
+((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__)))
+
+/**
+ * @brief Disable the specified DMA Stream interrupts.
+ * @param __HANDLE__ DMA handle
+ * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask.
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask.
+ * @arg DMA_IT_TE: Transfer error interrupt mask.
+ * @arg DMA_IT_FE: FIFO error interrupt mask.
+ * @arg DMA_IT_DME: Direct mode error interrupt.
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
+((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__)))
+
+/**
+ * @brief Check whether the specified DMA Stream interrupt is enabled or not.
+ * @param __HANDLE__ DMA handle
+ * @param __INTERRUPT__ specifies the DMA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask.
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask.
+ * @arg DMA_IT_TE: Transfer error interrupt mask.
+ * @arg DMA_IT_FE: FIFO error interrupt mask.
+ * @arg DMA_IT_DME: Direct mode error interrupt.
+ * @retval The state of DMA_IT.
+ */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
+ ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \
+ ((__HANDLE__)->Instance->FCR & (__INTERRUPT__)))
+
+/**
+ * @brief Writes the number of data units to be transferred on the DMA Stream.
+ * @param __HANDLE__ DMA handle
+ * @param __COUNTER__ Number of data units to be transferred (from 0 to 65535)
+ * Number of data items depends only on the Peripheral data format.
+ *
+ * @note If Peripheral data format is Bytes: number of data units is equal
+ * to total number of bytes to be transferred.
+ *
+ * @note If Peripheral data format is Half-Word: number of data units is
+ * equal to total number of bytes to be transferred / 2.
+ *
+ * @note If Peripheral data format is Word: number of data units is equal
+ * to total number of bytes to be transferred / 4.
+ *
+ * @retval The number of remaining data units in the current DMAy Streamx transfer.
+ */
+#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->NDTR = (uint16_t)(__COUNTER__))
+
+/**
+ * @brief Returns the number of remaining data units in the current DMAy Streamx transfer.
+ * @param __HANDLE__ DMA handle
+ *
+ * @retval The number of remaining data units in the current DMA Stream transfer.
+ */
+#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->NDTR)
+
+
+/* Include DMA HAL Extension module */
+#include "stm32f7xx_hal_dma_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Functions DMA Exported Functions
+ * @brief DMA Exported functions
+ * @{
+ */
+
+/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions
+ * @brief I/O operation functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout);
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma));
+HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions
+ * @brief Peripheral State functions
+ * @{
+ */
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+/* Private Constants -------------------------------------------------------------*/
+/** @defgroup DMA_Private_Constants DMA Private Constants
+ * @brief DMA private defines and constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMA_Private_Macros DMA Private Macros
+ * @brief DMA private macros
+ * @{
+ */
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+ ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
+ ((DIRECTION) == DMA_MEMORY_TO_MEMORY))
+
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x01U) && ((SIZE) < 0x10000U))
+
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+ ((STATE) == DMA_PINC_DISABLE))
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
+ ((STATE) == DMA_MINC_DISABLE))
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_PDATAALIGN_WORD))
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_MDATAALIGN_WORD ))
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
+ ((MODE) == DMA_CIRCULAR) || \
+ ((MODE) == DMA_PFCTRL))
+
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
+ ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+ ((PRIORITY) == DMA_PRIORITY_HIGH) || \
+ ((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
+
+#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \
+ ((STATE) == DMA_FIFOMODE_ENABLE))
+
+#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \
+ ((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL) || \
+ ((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \
+ ((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL))
+
+#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \
+ ((BURST) == DMA_MBURST_INC4) || \
+ ((BURST) == DMA_MBURST_INC8) || \
+ ((BURST) == DMA_MBURST_INC16))
+
+#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \
+ ((BURST) == DMA_PBURST_INC4) || \
+ ((BURST) == DMA_PBURST_INC8) || \
+ ((BURST) == DMA_PBURST_INC16))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DMA_Private_Functions DMA Private Functions
+ * @brief DMA private functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h
new file mode 100644
index 00000000..f4ad27c6
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h
@@ -0,0 +1,201 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_dma_ex.h
+ * @author MCD Application Team
+ * @brief Header file of DMA HAL extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_DMA_EX_H
+#define __STM32F7xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMAEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Types DMAEx Exported Types
+ * @brief DMAEx Exported types
+ * @{
+ */
+
+/**
+ * @brief HAL DMA Memory definition
+ */
+typedef enum
+{
+ MEMORY0 = 0x00U, /*!< Memory 0 */
+ MEMORY1 = 0x01U, /*!< Memory 1 */
+
+}HAL_DMA_MemoryTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Constants DMA Exported Constants
+ * @brief DMA Exported constants
+ * @{
+ */
+
+/** @defgroup DMAEx_Channel_selection DMA Channel selection
+ * @brief DMAEx channel selection
+ * @{
+ */
+#define DMA_CHANNEL_0 0x00000000U /*!< DMA Channel 0 */
+#define DMA_CHANNEL_1 0x02000000U /*!< DMA Channel 1 */
+#define DMA_CHANNEL_2 0x04000000U /*!< DMA Channel 2 */
+#define DMA_CHANNEL_3 0x06000000U /*!< DMA Channel 3 */
+#define DMA_CHANNEL_4 0x08000000U /*!< DMA Channel 4 */
+#define DMA_CHANNEL_5 0x0A000000U /*!< DMA Channel 5 */
+#define DMA_CHANNEL_6 0x0C000000U /*!< DMA Channel 6 */
+#define DMA_CHANNEL_7 0x0E000000U /*!< DMA Channel 7 */
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
+ defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
+ defined (STM32F779xx)
+#define DMA_CHANNEL_8 0x10000000U /*!< DMA Channel 8 */
+#define DMA_CHANNEL_9 0x12000000U /*!< DMA Channel 9 */
+#define DMA_CHANNEL_10 0x14000000U /*!< DMA Channel 10*/
+#define DMA_CHANNEL_11 0x16000000U /*!< DMA Channel 11*/
+#define DMA_CHANNEL_12 0x18000000U /*!< DMA Channel 12*/
+#define DMA_CHANNEL_13 0x1A000000U /*!< DMA Channel 13*/
+#define DMA_CHANNEL_14 0x1C000000U /*!< DMA Channel 14*/
+#define DMA_CHANNEL_15 0x1E000000U /*!< DMA Channel 15*/
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
+ STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
+ * @brief DMAEx Exported functions
+ * @{
+ */
+
+/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ * @{
+ */
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory);
+
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMAEx_Private_Macros DMA Private Macros
+ * @brief DMAEx private macros
+ * @{
+ */
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
+ defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
+ defined (STM32F779xx)
+#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \
+ ((CHANNEL) == DMA_CHANNEL_1) || \
+ ((CHANNEL) == DMA_CHANNEL_2) || \
+ ((CHANNEL) == DMA_CHANNEL_3) || \
+ ((CHANNEL) == DMA_CHANNEL_4) || \
+ ((CHANNEL) == DMA_CHANNEL_5) || \
+ ((CHANNEL) == DMA_CHANNEL_6) || \
+ ((CHANNEL) == DMA_CHANNEL_7) || \
+ ((CHANNEL) == DMA_CHANNEL_8) || \
+ ((CHANNEL) == DMA_CHANNEL_9) || \
+ ((CHANNEL) == DMA_CHANNEL_10) || \
+ ((CHANNEL) == DMA_CHANNEL_11) || \
+ ((CHANNEL) == DMA_CHANNEL_12) || \
+ ((CHANNEL) == DMA_CHANNEL_13) || \
+ ((CHANNEL) == DMA_CHANNEL_14) || \
+ ((CHANNEL) == DMA_CHANNEL_15))
+#else
+#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \
+ ((CHANNEL) == DMA_CHANNEL_1) || \
+ ((CHANNEL) == DMA_CHANNEL_2) || \
+ ((CHANNEL) == DMA_CHANNEL_3) || \
+ ((CHANNEL) == DMA_CHANNEL_4) || \
+ ((CHANNEL) == DMA_CHANNEL_5) || \
+ ((CHANNEL) == DMA_CHANNEL_6) || \
+ ((CHANNEL) == DMA_CHANNEL_7))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
+ STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DMAEx_Private_Functions DMAEx Private Functions
+ * @brief DMAEx Private functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_eth.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_eth.h
new file mode 100644
index 00000000..1f84c99d
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_eth.h
@@ -0,0 +1,2184 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_eth.h
+ * @author MCD Application Team
+ * @brief Header file of ETH HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_ETH_H
+#define __STM32F7xx_HAL_ETH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+#if defined (ETH)
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ETH
+ * @{
+ */
+
+/** @addtogroup ETH_Private_Macros
+ * @{
+ */
+#define IS_ETH_PHY_ADDRESS(ADDRESS) ((ADDRESS) <= 0x20)
+#define IS_ETH_AUTONEGOTIATION(CMD) (((CMD) == ETH_AUTONEGOTIATION_ENABLE) || \
+ ((CMD) == ETH_AUTONEGOTIATION_DISABLE))
+#define IS_ETH_SPEED(SPEED) (((SPEED) == ETH_SPEED_10M) || \
+ ((SPEED) == ETH_SPEED_100M))
+#define IS_ETH_DUPLEX_MODE(MODE) (((MODE) == ETH_MODE_FULLDUPLEX) || \
+ ((MODE) == ETH_MODE_HALFDUPLEX))
+#define IS_ETH_RX_MODE(MODE) (((MODE) == ETH_RXPOLLING_MODE) || \
+ ((MODE) == ETH_RXINTERRUPT_MODE))
+#define IS_ETH_CHECKSUM_MODE(MODE) (((MODE) == ETH_CHECKSUM_BY_HARDWARE) || \
+ ((MODE) == ETH_CHECKSUM_BY_SOFTWARE))
+#define IS_ETH_MEDIA_INTERFACE(MODE) (((MODE) == ETH_MEDIA_INTERFACE_MII) || \
+ ((MODE) == ETH_MEDIA_INTERFACE_RMII))
+#define IS_ETH_WATCHDOG(CMD) (((CMD) == ETH_WATCHDOG_ENABLE) || \
+ ((CMD) == ETH_WATCHDOG_DISABLE))
+#define IS_ETH_JABBER(CMD) (((CMD) == ETH_JABBER_ENABLE) || \
+ ((CMD) == ETH_JABBER_DISABLE))
+#define IS_ETH_INTER_FRAME_GAP(GAP) (((GAP) == ETH_INTERFRAMEGAP_96BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_88BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_80BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_72BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_64BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_56BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_48BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_40BIT))
+#define IS_ETH_CARRIER_SENSE(CMD) (((CMD) == ETH_CARRIERSENCE_ENABLE) || \
+ ((CMD) == ETH_CARRIERSENCE_DISABLE))
+#define IS_ETH_RECEIVE_OWN(CMD) (((CMD) == ETH_RECEIVEOWN_ENABLE) || \
+ ((CMD) == ETH_RECEIVEOWN_DISABLE))
+#define IS_ETH_LOOPBACK_MODE(CMD) (((CMD) == ETH_LOOPBACKMODE_ENABLE) || \
+ ((CMD) == ETH_LOOPBACKMODE_DISABLE))
+#define IS_ETH_CHECKSUM_OFFLOAD(CMD) (((CMD) == ETH_CHECKSUMOFFLAOD_ENABLE) || \
+ ((CMD) == ETH_CHECKSUMOFFLAOD_DISABLE))
+#define IS_ETH_RETRY_TRANSMISSION(CMD) (((CMD) == ETH_RETRYTRANSMISSION_ENABLE) || \
+ ((CMD) == ETH_RETRYTRANSMISSION_DISABLE))
+#define IS_ETH_AUTOMATIC_PADCRC_STRIP(CMD) (((CMD) == ETH_AUTOMATICPADCRCSTRIP_ENABLE) || \
+ ((CMD) == ETH_AUTOMATICPADCRCSTRIP_DISABLE))
+#define IS_ETH_BACKOFF_LIMIT(LIMIT) (((LIMIT) == ETH_BACKOFFLIMIT_10) || \
+ ((LIMIT) == ETH_BACKOFFLIMIT_8) || \
+ ((LIMIT) == ETH_BACKOFFLIMIT_4) || \
+ ((LIMIT) == ETH_BACKOFFLIMIT_1))
+#define IS_ETH_DEFERRAL_CHECK(CMD) (((CMD) == ETH_DEFFERRALCHECK_ENABLE) || \
+ ((CMD) == ETH_DEFFERRALCHECK_DISABLE))
+#define IS_ETH_RECEIVE_ALL(CMD) (((CMD) == ETH_RECEIVEALL_ENABLE) || \
+ ((CMD) == ETH_RECEIVEAll_DISABLE))
+#define IS_ETH_SOURCE_ADDR_FILTER(CMD) (((CMD) == ETH_SOURCEADDRFILTER_NORMAL_ENABLE) || \
+ ((CMD) == ETH_SOURCEADDRFILTER_INVERSE_ENABLE) || \
+ ((CMD) == ETH_SOURCEADDRFILTER_DISABLE))
+#define IS_ETH_CONTROL_FRAMES(PASS) (((PASS) == ETH_PASSCONTROLFRAMES_BLOCKALL) || \
+ ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDALL) || \
+ ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER))
+#define IS_ETH_BROADCAST_FRAMES_RECEPTION(CMD) (((CMD) == ETH_BROADCASTFRAMESRECEPTION_ENABLE) || \
+ ((CMD) == ETH_BROADCASTFRAMESRECEPTION_DISABLE))
+#define IS_ETH_DESTINATION_ADDR_FILTER(FILTER) (((FILTER) == ETH_DESTINATIONADDRFILTER_NORMAL) || \
+ ((FILTER) == ETH_DESTINATIONADDRFILTER_INVERSE))
+#define IS_ETH_PROMISCUOUS_MODE(CMD) (((CMD) == ETH_PROMISCUOUS_MODE_ENABLE) || \
+ ((CMD) == ETH_PROMISCUOUS_MODE_DISABLE))
+#define IS_ETH_MULTICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE) || \
+ ((FILTER) == ETH_MULTICASTFRAMESFILTER_HASHTABLE) || \
+ ((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECT) || \
+ ((FILTER) == ETH_MULTICASTFRAMESFILTER_NONE))
+#define IS_ETH_UNICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE) || \
+ ((FILTER) == ETH_UNICASTFRAMESFILTER_HASHTABLE) || \
+ ((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECT))
+#define IS_ETH_PAUSE_TIME(TIME) ((TIME) <= 0xFFFF)
+#define IS_ETH_ZEROQUANTA_PAUSE(CMD) (((CMD) == ETH_ZEROQUANTAPAUSE_ENABLE) || \
+ ((CMD) == ETH_ZEROQUANTAPAUSE_DISABLE))
+#define IS_ETH_PAUSE_LOW_THRESHOLD(THRESHOLD) (((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS4) || \
+ ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS28) || \
+ ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS144) || \
+ ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS256))
+#define IS_ETH_UNICAST_PAUSE_FRAME_DETECT(CMD) (((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_ENABLE) || \
+ ((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_DISABLE))
+#define IS_ETH_RECEIVE_FLOWCONTROL(CMD) (((CMD) == ETH_RECEIVEFLOWCONTROL_ENABLE) || \
+ ((CMD) == ETH_RECEIVEFLOWCONTROL_DISABLE))
+#define IS_ETH_TRANSMIT_FLOWCONTROL(CMD) (((CMD) == ETH_TRANSMITFLOWCONTROL_ENABLE) || \
+ ((CMD) == ETH_TRANSMITFLOWCONTROL_DISABLE))
+#define IS_ETH_VLAN_TAG_COMPARISON(COMPARISON) (((COMPARISON) == ETH_VLANTAGCOMPARISON_12BIT) || \
+ ((COMPARISON) == ETH_VLANTAGCOMPARISON_16BIT))
+#define IS_ETH_VLAN_TAG_IDENTIFIER(IDENTIFIER) ((IDENTIFIER) <= 0xFFFF)
+#define IS_ETH_MAC_ADDRESS0123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS0) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS1) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS2) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS3))
+#define IS_ETH_MAC_ADDRESS123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS1) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS2) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS3))
+#define IS_ETH_MAC_ADDRESS_FILTER(FILTER) (((FILTER) == ETH_MAC_ADDRESSFILTER_SA) || \
+ ((FILTER) == ETH_MAC_ADDRESSFILTER_DA))
+#define IS_ETH_MAC_ADDRESS_MASK(MASK) (((MASK) == ETH_MAC_ADDRESSMASK_BYTE6) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE5) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE4) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE3) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE2) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE1))
+#define IS_ETH_DROP_TCPIP_CHECKSUM_FRAME(CMD) (((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE) || \
+ ((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE))
+#define IS_ETH_RECEIVE_STORE_FORWARD(CMD) (((CMD) == ETH_RECEIVESTOREFORWARD_ENABLE) || \
+ ((CMD) == ETH_RECEIVESTOREFORWARD_DISABLE))
+#define IS_ETH_FLUSH_RECEIVE_FRAME(CMD) (((CMD) == ETH_FLUSHRECEIVEDFRAME_ENABLE) || \
+ ((CMD) == ETH_FLUSHRECEIVEDFRAME_DISABLE))
+#define IS_ETH_TRANSMIT_STORE_FORWARD(CMD) (((CMD) == ETH_TRANSMITSTOREFORWARD_ENABLE) || \
+ ((CMD) == ETH_TRANSMITSTOREFORWARD_DISABLE))
+#define IS_ETH_TRANSMIT_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_64BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_128BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_192BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_256BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_40BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_32BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_24BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_16BYTES))
+#define IS_ETH_FORWARD_ERROR_FRAMES(CMD) (((CMD) == ETH_FORWARDERRORFRAMES_ENABLE) || \
+ ((CMD) == ETH_FORWARDERRORFRAMES_DISABLE))
+#define IS_ETH_FORWARD_UNDERSIZED_GOOD_FRAMES(CMD) (((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE) || \
+ ((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE))
+#define IS_ETH_RECEIVE_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES) || \
+ ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES) || \
+ ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES) || \
+ ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES))
+#define IS_ETH_SECOND_FRAME_OPERATE(CMD) (((CMD) == ETH_SECONDFRAMEOPERARTE_ENABLE) || \
+ ((CMD) == ETH_SECONDFRAMEOPERARTE_DISABLE))
+#define IS_ETH_ADDRESS_ALIGNED_BEATS(CMD) (((CMD) == ETH_ADDRESSALIGNEDBEATS_ENABLE) || \
+ ((CMD) == ETH_ADDRESSALIGNEDBEATS_DISABLE))
+#define IS_ETH_FIXED_BURST(CMD) (((CMD) == ETH_FIXEDBURST_ENABLE) || \
+ ((CMD) == ETH_FIXEDBURST_DISABLE))
+#define IS_ETH_RXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_RXDMABURSTLENGTH_1BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_2BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_8BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_16BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_32BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_4BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_8BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_16BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_32BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_64BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_128BEAT))
+#define IS_ETH_TXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_TXDMABURSTLENGTH_1BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_2BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_8BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_16BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_32BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_4BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_8BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_16BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_32BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_64BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_128BEAT))
+#define IS_ETH_DMA_DESC_SKIP_LENGTH(LENGTH) ((LENGTH) <= 0x1F)
+#define IS_ETH_DMA_ARBITRATION_ROUNDROBIN_RXTX(RATIO) (((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_RXPRIORTX))
+#define IS_ETH_DMATXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMATXDESC_OWN) || \
+ ((FLAG) == ETH_DMATXDESC_IC) || \
+ ((FLAG) == ETH_DMATXDESC_LS) || \
+ ((FLAG) == ETH_DMATXDESC_FS) || \
+ ((FLAG) == ETH_DMATXDESC_DC) || \
+ ((FLAG) == ETH_DMATXDESC_DP) || \
+ ((FLAG) == ETH_DMATXDESC_TTSE) || \
+ ((FLAG) == ETH_DMATXDESC_TER) || \
+ ((FLAG) == ETH_DMATXDESC_TCH) || \
+ ((FLAG) == ETH_DMATXDESC_TTSS) || \
+ ((FLAG) == ETH_DMATXDESC_IHE) || \
+ ((FLAG) == ETH_DMATXDESC_ES) || \
+ ((FLAG) == ETH_DMATXDESC_JT) || \
+ ((FLAG) == ETH_DMATXDESC_FF) || \
+ ((FLAG) == ETH_DMATXDESC_PCE) || \
+ ((FLAG) == ETH_DMATXDESC_LCA) || \
+ ((FLAG) == ETH_DMATXDESC_NC) || \
+ ((FLAG) == ETH_DMATXDESC_LCO) || \
+ ((FLAG) == ETH_DMATXDESC_EC) || \
+ ((FLAG) == ETH_DMATXDESC_VF) || \
+ ((FLAG) == ETH_DMATXDESC_CC) || \
+ ((FLAG) == ETH_DMATXDESC_ED) || \
+ ((FLAG) == ETH_DMATXDESC_UF) || \
+ ((FLAG) == ETH_DMATXDESC_DB))
+#define IS_ETH_DMA_TXDESC_SEGMENT(SEGMENT) (((SEGMENT) == ETH_DMATXDESC_LASTSEGMENTS) || \
+ ((SEGMENT) == ETH_DMATXDESC_FIRSTSEGMENT))
+#define IS_ETH_DMA_TXDESC_CHECKSUM(CHECKSUM) (((CHECKSUM) == ETH_DMATXDESC_CHECKSUMBYPASS) || \
+ ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMIPV4HEADER) || \
+ ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT) || \
+ ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL))
+#define IS_ETH_DMATXDESC_BUFFER_SIZE(SIZE) ((SIZE) <= 0x1FFF)
+#define IS_ETH_DMARXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMARXDESC_OWN) || \
+ ((FLAG) == ETH_DMARXDESC_AFM) || \
+ ((FLAG) == ETH_DMARXDESC_ES) || \
+ ((FLAG) == ETH_DMARXDESC_DE) || \
+ ((FLAG) == ETH_DMARXDESC_SAF) || \
+ ((FLAG) == ETH_DMARXDESC_LE) || \
+ ((FLAG) == ETH_DMARXDESC_OE) || \
+ ((FLAG) == ETH_DMARXDESC_VLAN) || \
+ ((FLAG) == ETH_DMARXDESC_FS) || \
+ ((FLAG) == ETH_DMARXDESC_LS) || \
+ ((FLAG) == ETH_DMARXDESC_IPV4HCE) || \
+ ((FLAG) == ETH_DMARXDESC_LC) || \
+ ((FLAG) == ETH_DMARXDESC_FT) || \
+ ((FLAG) == ETH_DMARXDESC_RWT) || \
+ ((FLAG) == ETH_DMARXDESC_RE) || \
+ ((FLAG) == ETH_DMARXDESC_DBE) || \
+ ((FLAG) == ETH_DMARXDESC_CE) || \
+ ((FLAG) == ETH_DMARXDESC_MAMPCE))
+#define IS_ETH_DMA_RXDESC_BUFFER(BUFFER) (((BUFFER) == ETH_DMARXDESC_BUFFER1) || \
+ ((BUFFER) == ETH_DMARXDESC_BUFFER2))
+#define IS_ETH_PMT_GET_FLAG(FLAG) (((FLAG) == ETH_PMT_FLAG_WUFR) || \
+ ((FLAG) == ETH_PMT_FLAG_MPR))
+#define IS_ETH_DMA_FLAG(FLAG) ((((FLAG) & (uint32_t)0xC7FE1800) == 0x00) && ((FLAG) != 0x00))
+#define IS_ETH_DMA_GET_FLAG(FLAG) (((FLAG) == ETH_DMA_FLAG_TST) || ((FLAG) == ETH_DMA_FLAG_PMT) || \
+ ((FLAG) == ETH_DMA_FLAG_MMC) || ((FLAG) == ETH_DMA_FLAG_DATATRANSFERERROR) || \
+ ((FLAG) == ETH_DMA_FLAG_READWRITEERROR) || ((FLAG) == ETH_DMA_FLAG_ACCESSERROR) || \
+ ((FLAG) == ETH_DMA_FLAG_NIS) || ((FLAG) == ETH_DMA_FLAG_AIS) || \
+ ((FLAG) == ETH_DMA_FLAG_ER) || ((FLAG) == ETH_DMA_FLAG_FBE) || \
+ ((FLAG) == ETH_DMA_FLAG_ET) || ((FLAG) == ETH_DMA_FLAG_RWT) || \
+ ((FLAG) == ETH_DMA_FLAG_RPS) || ((FLAG) == ETH_DMA_FLAG_RBU) || \
+ ((FLAG) == ETH_DMA_FLAG_R) || ((FLAG) == ETH_DMA_FLAG_TU) || \
+ ((FLAG) == ETH_DMA_FLAG_RO) || ((FLAG) == ETH_DMA_FLAG_TJT) || \
+ ((FLAG) == ETH_DMA_FLAG_TBU) || ((FLAG) == ETH_DMA_FLAG_TPS) || \
+ ((FLAG) == ETH_DMA_FLAG_T))
+#define IS_ETH_MAC_IT(IT) ((((IT) & (uint32_t)0xFFFFFDF1) == 0x00) && ((IT) != 0x00))
+#define IS_ETH_MAC_GET_IT(IT) (((IT) == ETH_MAC_IT_TST) || ((IT) == ETH_MAC_IT_MMCT) || \
+ ((IT) == ETH_MAC_IT_MMCR) || ((IT) == ETH_MAC_IT_MMC) || \
+ ((IT) == ETH_MAC_IT_PMT))
+#define IS_ETH_MAC_GET_FLAG(FLAG) (((FLAG) == ETH_MAC_FLAG_TST) || ((FLAG) == ETH_MAC_FLAG_MMCT) || \
+ ((FLAG) == ETH_MAC_FLAG_MMCR) || ((FLAG) == ETH_MAC_FLAG_MMC) || \
+ ((FLAG) == ETH_MAC_FLAG_PMT))
+#define IS_ETH_DMA_IT(IT) ((((IT) & (uint32_t)0xC7FE1800) == 0x00) && ((IT) != 0x00))
+#define IS_ETH_DMA_GET_IT(IT) (((IT) == ETH_DMA_IT_TST) || ((IT) == ETH_DMA_IT_PMT) || \
+ ((IT) == ETH_DMA_IT_MMC) || ((IT) == ETH_DMA_IT_NIS) || \
+ ((IT) == ETH_DMA_IT_AIS) || ((IT) == ETH_DMA_IT_ER) || \
+ ((IT) == ETH_DMA_IT_FBE) || ((IT) == ETH_DMA_IT_ET) || \
+ ((IT) == ETH_DMA_IT_RWT) || ((IT) == ETH_DMA_IT_RPS) || \
+ ((IT) == ETH_DMA_IT_RBU) || ((IT) == ETH_DMA_IT_R) || \
+ ((IT) == ETH_DMA_IT_TU) || ((IT) == ETH_DMA_IT_RO) || \
+ ((IT) == ETH_DMA_IT_TJT) || ((IT) == ETH_DMA_IT_TBU) || \
+ ((IT) == ETH_DMA_IT_TPS) || ((IT) == ETH_DMA_IT_T))
+#define IS_ETH_DMA_GET_OVERFLOW(OVERFLOW) (((OVERFLOW) == ETH_DMA_OVERFLOW_RXFIFOCOUNTER) || \
+ ((OVERFLOW) == ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER))
+#define IS_ETH_MMC_IT(IT) (((((IT) & (uint32_t)0xFFDF3FFF) == 0x00) || (((IT) & (uint32_t)0xEFFDFF9F) == 0x00)) && \
+ ((IT) != 0x00))
+#define IS_ETH_MMC_GET_IT(IT) (((IT) == ETH_MMC_IT_TGF) || ((IT) == ETH_MMC_IT_TGFMSC) || \
+ ((IT) == ETH_MMC_IT_TGFSC) || ((IT) == ETH_MMC_IT_RGUF) || \
+ ((IT) == ETH_MMC_IT_RFAE) || ((IT) == ETH_MMC_IT_RFCE))
+#define IS_ETH_ENHANCED_DESCRIPTOR_FORMAT(CMD) (((CMD) == ETH_DMAENHANCEDDESCRIPTOR_ENABLE) || \
+ ((CMD) == ETH_DMAENHANCEDDESCRIPTOR_DISABLE))
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup ETH_Private_Defines
+ * @{
+ */
+/* Delay to wait when writing to some Ethernet registers */
+#define ETH_REG_WRITE_DELAY ((uint32_t)0x00000001U)
+
+/* Ethernet Errors */
+#define ETH_SUCCESS ((uint32_t)0U)
+#define ETH_ERROR ((uint32_t)1U)
+
+/* Ethernet DMA Tx descriptors Collision Count Shift */
+#define ETH_DMATXDESC_COLLISION_COUNTSHIFT ((uint32_t)3U)
+
+/* Ethernet DMA Tx descriptors Buffer2 Size Shift */
+#define ETH_DMATXDESC_BUFFER2_SIZESHIFT ((uint32_t)16U)
+
+/* Ethernet DMA Rx descriptors Frame Length Shift */
+#define ETH_DMARXDESC_FRAME_LENGTHSHIFT ((uint32_t)16U)
+
+/* Ethernet DMA Rx descriptors Buffer2 Size Shift */
+#define ETH_DMARXDESC_BUFFER2_SIZESHIFT ((uint32_t)16U)
+
+/* Ethernet DMA Rx descriptors Frame length Shift */
+#define ETH_DMARXDESC_FRAMELENGTHSHIFT ((uint32_t)16)
+
+/* Ethernet MAC address offsets */
+#define ETH_MAC_ADDR_HBASE (uint32_t)(ETH_MAC_BASE + (uint32_t)0x40U) /* Ethernet MAC address high offset */
+#define ETH_MAC_ADDR_LBASE (uint32_t)(ETH_MAC_BASE + (uint32_t)0x44U) /* Ethernet MAC address low offset */
+
+/* Ethernet MACMIIAR register Mask */
+#define ETH_MACMIIAR_CR_MASK ((uint32_t)0xFFFFFFE3U)
+
+/* Ethernet MACCR register Mask */
+#define ETH_MACCR_CLEAR_MASK ((uint32_t)0xFF20810FU)
+
+/* Ethernet MACFCR register Mask */
+#define ETH_MACFCR_CLEAR_MASK ((uint32_t)0x0000FF41U)
+
+/* Ethernet DMAOMR register Mask */
+#define ETH_DMAOMR_CLEAR_MASK ((uint32_t)0xF8DE3F23U)
+
+/* Ethernet Remote Wake-up frame register length */
+#define ETH_WAKEUP_REGISTER_LENGTH 8U
+
+/* Ethernet Missed frames counter Shift */
+#define ETH_DMA_RX_OVERFLOW_MISSEDFRAMES_COUNTERSHIFT 17U
+ /**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ETH_Exported_Types ETH Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_ETH_STATE_RESET = 0x00U, /*!< Peripheral not yet Initialized or disabled */
+ HAL_ETH_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_ETH_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */
+ HAL_ETH_STATE_BUSY_TX = 0x12U, /*!< Data Transmission process is ongoing */
+ HAL_ETH_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
+ HAL_ETH_STATE_BUSY_TX_RX = 0x32U, /*!< Data Transmission and Reception process is ongoing */
+ HAL_ETH_STATE_BUSY_WR = 0x42U, /*!< Write process is ongoing */
+ HAL_ETH_STATE_BUSY_RD = 0x82U, /*!< Read process is ongoing */
+ HAL_ETH_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
+ HAL_ETH_STATE_ERROR = 0x04U /*!< Reception process is ongoing */
+}HAL_ETH_StateTypeDef;
+
+/**
+ * @brief ETH Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t AutoNegotiation; /*!< Selects or not the AutoNegotiation mode for the external PHY
+ The AutoNegotiation allows an automatic setting of the Speed (10/100Mbps)
+ and the mode (half/full-duplex).
+ This parameter can be a value of @ref ETH_AutoNegotiation */
+
+ uint32_t Speed; /*!< Sets the Ethernet speed: 10/100 Mbps.
+ This parameter can be a value of @ref ETH_Speed */
+
+ uint32_t DuplexMode; /*!< Selects the MAC duplex mode: Half-Duplex or Full-Duplex mode
+ This parameter can be a value of @ref ETH_Duplex_Mode */
+
+ uint16_t PhyAddress; /*!< Ethernet PHY address.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 32 */
+
+ uint8_t *MACAddr; /*!< MAC Address of used Hardware: must be pointer on an array of 6 bytes */
+
+ uint32_t RxMode; /*!< Selects the Ethernet Rx mode: Polling mode, Interrupt mode.
+ This parameter can be a value of @ref ETH_Rx_Mode */
+
+ uint32_t ChecksumMode; /*!< Selects if the checksum is check by hardware or by software.
+ This parameter can be a value of @ref ETH_Checksum_Mode */
+
+ uint32_t MediaInterface ; /*!< Selects the media-independent interface or the reduced media-independent interface.
+ This parameter can be a value of @ref ETH_Media_Interface */
+
+} ETH_InitTypeDef;
+
+
+ /**
+ * @brief ETH MAC Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t Watchdog; /*!< Selects or not the Watchdog timer
+ When enabled, the MAC allows no more then 2048 bytes to be received.
+ When disabled, the MAC can receive up to 16384 bytes.
+ This parameter can be a value of @ref ETH_Watchdog */
+
+ uint32_t Jabber; /*!< Selects or not Jabber timer
+ When enabled, the MAC allows no more then 2048 bytes to be sent.
+ When disabled, the MAC can send up to 16384 bytes.
+ This parameter can be a value of @ref ETH_Jabber */
+
+ uint32_t InterFrameGap; /*!< Selects the minimum IFG between frames during transmission.
+ This parameter can be a value of @ref ETH_Inter_Frame_Gap */
+
+ uint32_t CarrierSense; /*!< Selects or not the Carrier Sense.
+ This parameter can be a value of @ref ETH_Carrier_Sense */
+
+ uint32_t ReceiveOwn; /*!< Selects or not the ReceiveOwn,
+ ReceiveOwn allows the reception of frames when the TX_EN signal is asserted
+ in Half-Duplex mode.
+ This parameter can be a value of @ref ETH_Receive_Own */
+
+ uint32_t LoopbackMode; /*!< Selects or not the internal MAC MII Loopback mode.
+ This parameter can be a value of @ref ETH_Loop_Back_Mode */
+
+ uint32_t ChecksumOffload; /*!< Selects or not the IPv4 checksum checking for received frame payloads' TCP/UDP/ICMP headers.
+ This parameter can be a value of @ref ETH_Checksum_Offload */
+
+ uint32_t RetryTransmission; /*!< Selects or not the MAC attempt retries transmission, based on the settings of BL,
+ when a collision occurs (Half-Duplex mode).
+ This parameter can be a value of @ref ETH_Retry_Transmission */
+
+ uint32_t AutomaticPadCRCStrip; /*!< Selects or not the Automatic MAC Pad/CRC Stripping.
+ This parameter can be a value of @ref ETH_Automatic_Pad_CRC_Strip */
+
+ uint32_t BackOffLimit; /*!< Selects the BackOff limit value.
+ This parameter can be a value of @ref ETH_Back_Off_Limit */
+
+ uint32_t DeferralCheck; /*!< Selects or not the deferral check function (Half-Duplex mode).
+ This parameter can be a value of @ref ETH_Deferral_Check */
+
+ uint32_t ReceiveAll; /*!< Selects or not all frames reception by the MAC (No filtering).
+ This parameter can be a value of @ref ETH_Receive_All */
+
+ uint32_t SourceAddrFilter; /*!< Selects the Source Address Filter mode.
+ This parameter can be a value of @ref ETH_Source_Addr_Filter */
+
+ uint32_t PassControlFrames; /*!< Sets the forwarding mode of the control frames (including unicast and multicast PAUSE frames)
+ This parameter can be a value of @ref ETH_Pass_Control_Frames */
+
+ uint32_t BroadcastFramesReception; /*!< Selects or not the reception of Broadcast Frames.
+ This parameter can be a value of @ref ETH_Broadcast_Frames_Reception */
+
+ uint32_t DestinationAddrFilter; /*!< Sets the destination filter mode for both unicast and multicast frames.
+ This parameter can be a value of @ref ETH_Destination_Addr_Filter */
+
+ uint32_t PromiscuousMode; /*!< Selects or not the Promiscuous Mode
+ This parameter can be a value of @ref ETH_Promiscuous_Mode */
+
+ uint32_t MulticastFramesFilter; /*!< Selects the Multicast Frames filter mode: None/HashTableFilter/PerfectFilter/PerfectHashTableFilter.
+ This parameter can be a value of @ref ETH_Multicast_Frames_Filter */
+
+ uint32_t UnicastFramesFilter; /*!< Selects the Unicast Frames filter mode: HashTableFilter/PerfectFilter/PerfectHashTableFilter.
+ This parameter can be a value of @ref ETH_Unicast_Frames_Filter */
+
+ uint32_t HashTableHigh; /*!< This field holds the higher 32 bits of Hash table.
+ This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFF */
+
+ uint32_t HashTableLow; /*!< This field holds the lower 32 bits of Hash table.
+ This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFF */
+
+ uint32_t PauseTime; /*!< This field holds the value to be used in the Pause Time field in the transmit control frame.
+ This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFF */
+
+ uint32_t ZeroQuantaPause; /*!< Selects or not the automatic generation of Zero-Quanta Pause Control frames.
+ This parameter can be a value of @ref ETH_Zero_Quanta_Pause */
+
+ uint32_t PauseLowThreshold; /*!< This field configures the threshold of the PAUSE to be checked for
+ automatic retransmission of PAUSE Frame.
+ This parameter can be a value of @ref ETH_Pause_Low_Threshold */
+
+ uint32_t UnicastPauseFrameDetect; /*!< Selects or not the MAC detection of the Pause frames (with MAC Address0
+ unicast address and unique multicast address).
+ This parameter can be a value of @ref ETH_Unicast_Pause_Frame_Detect */
+
+ uint32_t ReceiveFlowControl; /*!< Enables or disables the MAC to decode the received Pause frame and
+ disable its transmitter for a specified time (Pause Time)
+ This parameter can be a value of @ref ETH_Receive_Flow_Control */
+
+ uint32_t TransmitFlowControl; /*!< Enables or disables the MAC to transmit Pause frames (Full-Duplex mode)
+ or the MAC back-pressure operation (Half-Duplex mode)
+ This parameter can be a value of @ref ETH_Transmit_Flow_Control */
+
+ uint32_t VLANTagComparison; /*!< Selects the 12-bit VLAN identifier or the complete 16-bit VLAN tag for
+ comparison and filtering.
+ This parameter can be a value of @ref ETH_VLAN_Tag_Comparison */
+
+ uint32_t VLANTagIdentifier; /*!< Holds the VLAN tag identifier for receive frames */
+
+} ETH_MACInitTypeDef;
+
+
+/**
+ * @brief ETH DMA Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t DropTCPIPChecksumErrorFrame; /*!< Selects or not the Dropping of TCP/IP Checksum Error Frames.
+ This parameter can be a value of @ref ETH_Drop_TCP_IP_Checksum_Error_Frame */
+
+ uint32_t ReceiveStoreForward; /*!< Enables or disables the Receive store and forward mode.
+ This parameter can be a value of @ref ETH_Receive_Store_Forward */
+
+ uint32_t FlushReceivedFrame; /*!< Enables or disables the flushing of received frames.
+ This parameter can be a value of @ref ETH_Flush_Received_Frame */
+
+ uint32_t TransmitStoreForward; /*!< Enables or disables Transmit store and forward mode.
+ This parameter can be a value of @ref ETH_Transmit_Store_Forward */
+
+ uint32_t TransmitThresholdControl; /*!< Selects or not the Transmit Threshold Control.
+ This parameter can be a value of @ref ETH_Transmit_Threshold_Control */
+
+ uint32_t ForwardErrorFrames; /*!< Selects or not the forward to the DMA of erroneous frames.
+ This parameter can be a value of @ref ETH_Forward_Error_Frames */
+
+ uint32_t ForwardUndersizedGoodFrames; /*!< Enables or disables the Rx FIFO to forward Undersized frames (frames with no Error
+ and length less than 64 bytes) including pad-bytes and CRC)
+ This parameter can be a value of @ref ETH_Forward_Undersized_Good_Frames */
+
+ uint32_t ReceiveThresholdControl; /*!< Selects the threshold level of the Receive FIFO.
+ This parameter can be a value of @ref ETH_Receive_Threshold_Control */
+
+ uint32_t SecondFrameOperate; /*!< Selects or not the Operate on second frame mode, which allows the DMA to process a second
+ frame of Transmit data even before obtaining the status for the first frame.
+ This parameter can be a value of @ref ETH_Second_Frame_Operate */
+
+ uint32_t AddressAlignedBeats; /*!< Enables or disables the Address Aligned Beats.
+ This parameter can be a value of @ref ETH_Address_Aligned_Beats */
+
+ uint32_t FixedBurst; /*!< Enables or disables the AHB Master interface fixed burst transfers.
+ This parameter can be a value of @ref ETH_Fixed_Burst */
+
+ uint32_t RxDMABurstLength; /*!< Indicates the maximum number of beats to be transferred in one Rx DMA transaction.
+ This parameter can be a value of @ref ETH_Rx_DMA_Burst_Length */
+
+ uint32_t TxDMABurstLength; /*!< Indicates the maximum number of beats to be transferred in one Tx DMA transaction.
+ This parameter can be a value of @ref ETH_Tx_DMA_Burst_Length */
+
+ uint32_t EnhancedDescriptorFormat; /*!< Enables the enhanced descriptor format.
+ This parameter can be a value of @ref ETH_DMA_Enhanced_descriptor_format */
+
+ uint32_t DescriptorSkipLength; /*!< Specifies the number of word to skip between two unchained descriptors (Ring mode)
+ This parameter must be a number between Min_Data = 0 and Max_Data = 32 */
+
+ uint32_t DMAArbitration; /*!< Selects the DMA Tx/Rx arbitration.
+ This parameter can be a value of @ref ETH_DMA_Arbitration */
+} ETH_DMAInitTypeDef;
+
+
+/**
+ * @brief ETH DMA Descriptors data structure definition
+ */
+
+typedef struct
+{
+ __IO uint32_t Status; /*!< Status */
+
+ uint32_t ControlBufferSize; /*!< Control and Buffer1, Buffer2 lengths */
+
+ uint32_t Buffer1Addr; /*!< Buffer1 address pointer */
+
+ uint32_t Buffer2NextDescAddr; /*!< Buffer2 or next descriptor address pointer */
+
+ /*!< Enhanced Ethernet DMA PTP Descriptors */
+ uint32_t ExtendedStatus; /*!< Extended status for PTP receive descriptor */
+
+ uint32_t Reserved1; /*!< Reserved */
+
+ uint32_t TimeStampLow; /*!< Time Stamp Low value for transmit and receive */
+
+ uint32_t TimeStampHigh; /*!< Time Stamp High value for transmit and receive */
+
+} ETH_DMADescTypeDef;
+
+
+/**
+ * @brief Received Frame Informations structure definition
+ */
+typedef struct
+{
+ ETH_DMADescTypeDef *FSRxDesc; /*!< First Segment Rx Desc */
+
+ ETH_DMADescTypeDef *LSRxDesc; /*!< Last Segment Rx Desc */
+
+ uint32_t SegCount; /*!< Segment count */
+
+ uint32_t length; /*!< Frame length */
+
+ uint32_t buffer; /*!< Frame buffer */
+
+} ETH_DMARxFrameInfos;
+
+
+/**
+ * @brief ETH Handle Structure definition
+ */
+
+typedef struct
+{
+ ETH_TypeDef *Instance; /*!< Register base address */
+
+ ETH_InitTypeDef Init; /*!< Ethernet Init Configuration */
+
+ uint32_t LinkStatus; /*!< Ethernet link status */
+
+ ETH_DMADescTypeDef *RxDesc; /*!< Rx descriptor to Get */
+
+ ETH_DMADescTypeDef *TxDesc; /*!< Tx descriptor to Set */
+
+ ETH_DMARxFrameInfos RxFrameInfos; /*!< last Rx frame infos */
+
+ __IO HAL_ETH_StateTypeDef State; /*!< ETH communication state */
+
+ HAL_LockTypeDef Lock; /*!< ETH Lock */
+
+} ETH_HandleTypeDef;
+
+ /**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ETH_Exported_Constants ETH Exported Constants
+ * @{
+ */
+
+/** @defgroup ETH_Buffers_setting ETH Buffers setting
+ * @{
+ */
+#define ETH_MAX_PACKET_SIZE ((uint32_t)1524U) /*!< ETH_HEADER + ETH_EXTRA + ETH_VLAN_TAG + ETH_MAX_ETH_PAYLOAD + ETH_CRC */
+#define ETH_HEADER ((uint32_t)14U) /*!< 6 byte Dest addr, 6 byte Src addr, 2 byte length/type */
+#define ETH_CRC ((uint32_t)4U) /*!< Ethernet CRC */
+#define ETH_EXTRA ((uint32_t)2U) /*!< Extra bytes in some cases */
+#define ETH_VLAN_TAG ((uint32_t)4U) /*!< optional 802.1q VLAN Tag */
+#define ETH_MIN_ETH_PAYLOAD ((uint32_t)46U) /*!< Minimum Ethernet payload size */
+#define ETH_MAX_ETH_PAYLOAD ((uint32_t)1500U) /*!< Maximum Ethernet payload size */
+#define ETH_JUMBO_FRAME_PAYLOAD ((uint32_t)9000U) /*!< Jumbo frame payload size */
+
+ /* Ethernet driver receive buffers are organized in a chained linked-list, when
+ an Ethernet packet is received, the Rx-DMA will transfer the packet from RxFIFO
+ to the driver receive buffers memory.
+
+ Depending on the size of the received Ethernet packet and the size of
+ each Ethernet driver receive buffer, the received packet can take one or more
+ Ethernet driver receive buffer.
+
+ In below are defined the size of one Ethernet driver receive buffer ETH_RX_BUF_SIZE
+ and the total count of the driver receive buffers ETH_RXBUFNB.
+
+ The configured value for ETH_RX_BUF_SIZE and ETH_RXBUFNB are only provided as
+ example, they can be reconfigured in the application layer to fit the application
+ needs */
+
+/* Here we configure each Ethernet driver receive buffer to fit the Max size Ethernet
+ packet */
+#ifndef ETH_RX_BUF_SIZE
+ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE
+#endif
+
+/* 5 Ethernet driver receive buffers are used (in a chained linked list)*/
+#ifndef ETH_RXBUFNB
+ #define ETH_RXBUFNB ((uint32_t)5U) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */
+#endif
+
+
+ /* Ethernet driver transmit buffers are organized in a chained linked-list, when
+ an Ethernet packet is transmitted, Tx-DMA will transfer the packet from the
+ driver transmit buffers memory to the TxFIFO.
+
+ Depending on the size of the Ethernet packet to be transmitted and the size of
+ each Ethernet driver transmit buffer, the packet to be transmitted can take
+ one or more Ethernet driver transmit buffer.
+
+ In below are defined the size of one Ethernet driver transmit buffer ETH_TX_BUF_SIZE
+ and the total count of the driver transmit buffers ETH_TXBUFNB.
+
+ The configured value for ETH_TX_BUF_SIZE and ETH_TXBUFNB are only provided as
+ example, they can be reconfigured in the application layer to fit the application
+ needs */
+
+/* Here we configure each Ethernet driver transmit buffer to fit the Max size Ethernet
+ packet */
+#ifndef ETH_TX_BUF_SIZE
+ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE
+#endif
+
+/* 5 Ethernet driver transmit buffers are used (in a chained linked list)*/
+#ifndef ETH_TXBUFNB
+ #define ETH_TXBUFNB ((uint32_t)5U) /* 5 Tx buffers of size ETH_TX_BUF_SIZE */
+#endif
+
+ /**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_TX_Descriptor ETH DMA TX Descriptor
+ * @{
+ */
+
+/*
+ DMA Tx Descriptor
+ -----------------------------------------------------------------------------------------------
+ TDES0 | OWN(31) | CTRL[30:26] | Reserved[25:24] | CTRL[23:20] | Reserved[19:17] | Status[16:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES1 | Reserved[31:29] | Buffer2 ByteCount[28:16] | Reserved[15:13] | Buffer1 ByteCount[12:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES2 | Buffer1 Address [31:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES3 | Buffer2 Address [31:0] / Next Descriptor Address [31:0] |
+ -----------------------------------------------------------------------------------------------
+*/
+
+/**
+ * @brief Bit definition of TDES0 register: DMA Tx descriptor status register
+ */
+#define ETH_DMATXDESC_OWN ((uint32_t)0x80000000U) /*!< OWN bit: descriptor is owned by DMA engine */
+#define ETH_DMATXDESC_IC ((uint32_t)0x40000000U) /*!< Interrupt on Completion */
+#define ETH_DMATXDESC_LS ((uint32_t)0x20000000U) /*!< Last Segment */
+#define ETH_DMATXDESC_FS ((uint32_t)0x10000000U) /*!< First Segment */
+#define ETH_DMATXDESC_DC ((uint32_t)0x08000000U) /*!< Disable CRC */
+#define ETH_DMATXDESC_DP ((uint32_t)0x04000000U) /*!< Disable Padding */
+#define ETH_DMATXDESC_TTSE ((uint32_t)0x02000000U) /*!< Transmit Time Stamp Enable */
+#define ETH_DMATXDESC_CIC ((uint32_t)0x00C00000U) /*!< Checksum Insertion Control: 4 cases */
+#define ETH_DMATXDESC_CIC_BYPASS ((uint32_t)0x00000000U) /*!< Do Nothing: Checksum Engine is bypassed */
+#define ETH_DMATXDESC_CIC_IPV4HEADER ((uint32_t)0x00400000U) /*!< IPV4 header Checksum Insertion */
+#define ETH_DMATXDESC_CIC_TCPUDPICMP_SEGMENT ((uint32_t)0x00800000U) /*!< TCP/UDP/ICMP Checksum Insertion calculated over segment only */
+#define ETH_DMATXDESC_CIC_TCPUDPICMP_FULL ((uint32_t)0x00C00000U) /*!< TCP/UDP/ICMP Checksum Insertion fully calculated */
+#define ETH_DMATXDESC_TER ((uint32_t)0x00200000U) /*!< Transmit End of Ring */
+#define ETH_DMATXDESC_TCH ((uint32_t)0x00100000U) /*!< Second Address Chained */
+#define ETH_DMATXDESC_TTSS ((uint32_t)0x00020000U) /*!< Tx Time Stamp Status */
+#define ETH_DMATXDESC_IHE ((uint32_t)0x00010000U) /*!< IP Header Error */
+#define ETH_DMATXDESC_ES ((uint32_t)0x00008000U) /*!< Error summary: OR of the following bits: UE || ED || EC || LCO || NC || LCA || FF || JT */
+#define ETH_DMATXDESC_JT ((uint32_t)0x00004000U) /*!< Jabber Timeout */
+#define ETH_DMATXDESC_FF ((uint32_t)0x00002000U) /*!< Frame Flushed: DMA/MTL flushed the frame due to SW flush */
+#define ETH_DMATXDESC_PCE ((uint32_t)0x00001000U) /*!< Payload Checksum Error */
+#define ETH_DMATXDESC_LCA ((uint32_t)0x00000800U) /*!< Loss of Carrier: carrier lost during transmission */
+#define ETH_DMATXDESC_NC ((uint32_t)0x00000400U) /*!< No Carrier: no carrier signal from the transceiver */
+#define ETH_DMATXDESC_LCO ((uint32_t)0x00000200U) /*!< Late Collision: transmission aborted due to collision */
+#define ETH_DMATXDESC_EC ((uint32_t)0x00000100U) /*!< Excessive Collision: transmission aborted after 16 collisions */
+#define ETH_DMATXDESC_VF ((uint32_t)0x00000080U) /*!< VLAN Frame */
+#define ETH_DMATXDESC_CC ((uint32_t)0x00000078U) /*!< Collision Count */
+#define ETH_DMATXDESC_ED ((uint32_t)0x00000004U) /*!< Excessive Deferral */
+#define ETH_DMATXDESC_UF ((uint32_t)0x00000002U) /*!< Underflow Error: late data arrival from the memory */
+#define ETH_DMATXDESC_DB ((uint32_t)0x00000001U) /*!< Deferred Bit */
+
+/**
+ * @brief Bit definition of TDES1 register
+ */
+#define ETH_DMATXDESC_TBS2 ((uint32_t)0x1FFF0000U) /*!< Transmit Buffer2 Size */
+#define ETH_DMATXDESC_TBS1 ((uint32_t)0x00001FFFU) /*!< Transmit Buffer1 Size */
+
+/**
+ * @brief Bit definition of TDES2 register
+ */
+#define ETH_DMATXDESC_B1AP ((uint32_t)0xFFFFFFFFU) /*!< Buffer1 Address Pointer */
+
+/**
+ * @brief Bit definition of TDES3 register
+ */
+#define ETH_DMATXDESC_B2AP ((uint32_t)0xFFFFFFFFU) /*!< Buffer2 Address Pointer */
+
+ /*---------------------------------------------------------------------------------------------
+ TDES6 | Transmit Time Stamp Low [31:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES7 | Transmit Time Stamp High [31:0] |
+ ----------------------------------------------------------------------------------------------*/
+
+/* Bit definition of TDES6 register */
+ #define ETH_DMAPTPTXDESC_TTSL ((uint32_t)0xFFFFFFFFU) /* Transmit Time Stamp Low */
+
+/* Bit definition of TDES7 register */
+ #define ETH_DMAPTPTXDESC_TTSH ((uint32_t)0xFFFFFFFFU) /* Transmit Time Stamp High */
+
+/**
+ * @}
+ */
+/** @defgroup ETH_DMA_RX_Descriptor ETH DMA RX Descriptor
+ * @{
+ */
+
+/*
+ DMA Rx Descriptor
+ --------------------------------------------------------------------------------------------------------------------
+ RDES0 | OWN(31) | Status [30:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES1 | CTRL(31) | Reserved[30:29] | Buffer2 ByteCount[28:16] | CTRL[15:14] | Reserved(13) | Buffer1 ByteCount[12:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES2 | Buffer1 Address [31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES3 | Buffer2 Address [31:0] / Next Descriptor Address [31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+*/
+
+/**
+ * @brief Bit definition of RDES0 register: DMA Rx descriptor status register
+ */
+#define ETH_DMARXDESC_OWN ((uint32_t)0x80000000U) /*!< OWN bit: descriptor is owned by DMA engine */
+#define ETH_DMARXDESC_AFM ((uint32_t)0x40000000U) /*!< DA Filter Fail for the rx frame */
+#define ETH_DMARXDESC_FL ((uint32_t)0x3FFF0000U) /*!< Receive descriptor frame length */
+#define ETH_DMARXDESC_ES ((uint32_t)0x00008000U) /*!< Error summary: OR of the following bits: DE || OE || IPC || LC || RWT || RE || CE */
+#define ETH_DMARXDESC_DE ((uint32_t)0x00004000U) /*!< Descriptor error: no more descriptors for receive frame */
+#define ETH_DMARXDESC_SAF ((uint32_t)0x00002000U) /*!< SA Filter Fail for the received frame */
+#define ETH_DMARXDESC_LE ((uint32_t)0x00001000U) /*!< Frame size not matching with length field */
+#define ETH_DMARXDESC_OE ((uint32_t)0x00000800U) /*!< Overflow Error: Frame was damaged due to buffer overflow */
+#define ETH_DMARXDESC_VLAN ((uint32_t)0x00000400U) /*!< VLAN Tag: received frame is a VLAN frame */
+#define ETH_DMARXDESC_FS ((uint32_t)0x00000200U) /*!< First descriptor of the frame */
+#define ETH_DMARXDESC_LS ((uint32_t)0x00000100U) /*!< Last descriptor of the frame */
+#define ETH_DMARXDESC_IPV4HCE ((uint32_t)0x00000080U) /*!< IPC Checksum Error: Rx Ipv4 header checksum error */
+#define ETH_DMARXDESC_LC ((uint32_t)0x00000040U) /*!< Late collision occurred during reception */
+#define ETH_DMARXDESC_FT ((uint32_t)0x00000020U) /*!< Frame type - Ethernet, otherwise 802.3 */
+#define ETH_DMARXDESC_RWT ((uint32_t)0x00000010U) /*!< Receive Watchdog Timeout: watchdog timer expired during reception */
+#define ETH_DMARXDESC_RE ((uint32_t)0x00000008U) /*!< Receive error: error reported by MII interface */
+#define ETH_DMARXDESC_DBE ((uint32_t)0x00000004U) /*!< Dribble bit error: frame contains non int multiple of 8 bits */
+#define ETH_DMARXDESC_CE ((uint32_t)0x00000002U) /*!< CRC error */
+#define ETH_DMARXDESC_MAMPCE ((uint32_t)0x00000001U) /*!< Rx MAC Address/Payload Checksum Error: Rx MAC address matched/ Rx Payload Checksum Error */
+
+/**
+ * @brief Bit definition of RDES1 register
+ */
+#define ETH_DMARXDESC_DIC ((uint32_t)0x80000000U) /*!< Disable Interrupt on Completion */
+#define ETH_DMARXDESC_RBS2 ((uint32_t)0x1FFF0000U) /*!< Receive Buffer2 Size */
+#define ETH_DMARXDESC_RER ((uint32_t)0x00008000U) /*!< Receive End of Ring */
+#define ETH_DMARXDESC_RCH ((uint32_t)0x00004000U) /*!< Second Address Chained */
+#define ETH_DMARXDESC_RBS1 ((uint32_t)0x00001FFFU) /*!< Receive Buffer1 Size */
+
+/**
+ * @brief Bit definition of RDES2 register
+ */
+#define ETH_DMARXDESC_B1AP ((uint32_t)0xFFFFFFFFU) /*!< Buffer1 Address Pointer */
+
+/**
+ * @brief Bit definition of RDES3 register
+ */
+#define ETH_DMARXDESC_B2AP ((uint32_t)0xFFFFFFFFU) /*!< Buffer2 Address Pointer */
+
+/*---------------------------------------------------------------------------------------------------------------------
+ RDES4 | Reserved[31:15] | Extended Status [14:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES5 | Reserved[31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES6 | Receive Time Stamp Low [31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES7 | Receive Time Stamp High [31:0] |
+ --------------------------------------------------------------------------------------------------------------------*/
+
+/* Bit definition of RDES4 register */
+#define ETH_DMAPTPRXDESC_PTPV ((uint32_t)0x00002000U) /* PTP Version */
+#define ETH_DMAPTPRXDESC_PTPFT ((uint32_t)0x00001000U) /* PTP Frame Type */
+#define ETH_DMAPTPRXDESC_PTPMT ((uint32_t)0x00000F00U) /* PTP Message Type */
+#define ETH_DMAPTPRXDESC_PTPMT_SYNC ((uint32_t)0x00000100U) /* SYNC message (all clock types) */
+#define ETH_DMAPTPRXDESC_PTPMT_FOLLOWUP ((uint32_t)0x00000200U) /* FollowUp message (all clock types) */
+#define ETH_DMAPTPRXDESC_PTPMT_DELAYREQ ((uint32_t)0x00000300U) /* DelayReq message (all clock types) */
+#define ETH_DMAPTPRXDESC_PTPMT_DELAYRESP ((uint32_t)0x00000400U) /* DelayResp message (all clock types) */
+#define ETH_DMAPTPRXDESC_PTPMT_PDELAYREQ_ANNOUNCE ((uint32_t)0x00000500U) /* PdelayReq message (peer-to-peer transparent clock) or Announce message (Ordinary or Boundary clock) */
+#define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESP_MANAG ((uint32_t)0x00000600U) /* PdelayResp message (peer-to-peer transparent clock) or Management message (Ordinary or Boundary clock) */
+#define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESPFOLLOWUP_SIGNAL ((uint32_t)0x00000700U) /* PdelayRespFollowUp message (peer-to-peer transparent clock) or Signaling message (Ordinary or Boundary clock) */
+#define ETH_DMAPTPRXDESC_IPV6PR ((uint32_t)0x00000080U) /* IPv6 Packet Received */
+#define ETH_DMAPTPRXDESC_IPV4PR ((uint32_t)0x00000040U) /* IPv4 Packet Received */
+#define ETH_DMAPTPRXDESC_IPCB ((uint32_t)0x00000020U) /* IP Checksum Bypassed */
+#define ETH_DMAPTPRXDESC_IPPE ((uint32_t)0x00000010U) /* IP Payload Error */
+#define ETH_DMAPTPRXDESC_IPHE ((uint32_t)0x00000008U) /* IP Header Error */
+#define ETH_DMAPTPRXDESC_IPPT ((uint32_t)0x00000007U) /* IP Payload Type */
+#define ETH_DMAPTPRXDESC_IPPT_UDP ((uint32_t)0x00000001U) /* UDP payload encapsulated in the IP datagram */
+#define ETH_DMAPTPRXDESC_IPPT_TCP ((uint32_t)0x00000002U) /* TCP payload encapsulated in the IP datagram */
+#define ETH_DMAPTPRXDESC_IPPT_ICMP ((uint32_t)0x00000003U) /* ICMP payload encapsulated in the IP datagram */
+
+/* Bit definition of RDES6 register */
+#define ETH_DMAPTPRXDESC_RTSL ((uint32_t)0xFFFFFFFFU) /* Receive Time Stamp Low */
+
+/* Bit definition of RDES7 register */
+#define ETH_DMAPTPRXDESC_RTSH ((uint32_t)0xFFFFFFFFU) /* Receive Time Stamp High */
+/**
+ * @}
+ */
+ /** @defgroup ETH_AutoNegotiation ETH AutoNegotiation
+ * @{
+ */
+#define ETH_AUTONEGOTIATION_ENABLE ((uint32_t)0x00000001U)
+#define ETH_AUTONEGOTIATION_DISABLE ((uint32_t)0x00000000U)
+
+/**
+ * @}
+ */
+/** @defgroup ETH_Speed ETH Speed
+ * @{
+ */
+#define ETH_SPEED_10M ((uint32_t)0x00000000U)
+#define ETH_SPEED_100M ((uint32_t)0x00004000U)
+
+/**
+ * @}
+ */
+/** @defgroup ETH_Duplex_Mode ETH Duplex Mode
+ * @{
+ */
+#define ETH_MODE_FULLDUPLEX ((uint32_t)0x00000800U)
+#define ETH_MODE_HALFDUPLEX ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+/** @defgroup ETH_Rx_Mode ETH Rx Mode
+ * @{
+ */
+#define ETH_RXPOLLING_MODE ((uint32_t)0x00000000U)
+#define ETH_RXINTERRUPT_MODE ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Checksum_Mode ETH Checksum Mode
+ * @{
+ */
+#define ETH_CHECKSUM_BY_HARDWARE ((uint32_t)0x00000000U)
+#define ETH_CHECKSUM_BY_SOFTWARE ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Media_Interface ETH Media Interface
+ * @{
+ */
+#define ETH_MEDIA_INTERFACE_MII ((uint32_t)0x00000000U)
+#define ETH_MEDIA_INTERFACE_RMII ((uint32_t)SYSCFG_PMC_MII_RMII_SEL)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Watchdog ETH Watchdog
+ * @{
+ */
+#define ETH_WATCHDOG_ENABLE ((uint32_t)0x00000000U)
+#define ETH_WATCHDOG_DISABLE ((uint32_t)0x00800000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Jabber ETH Jabber
+ * @{
+ */
+#define ETH_JABBER_ENABLE ((uint32_t)0x00000000U)
+#define ETH_JABBER_DISABLE ((uint32_t)0x00400000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Inter_Frame_Gap ETH Inter Frame Gap
+ * @{
+ */
+#define ETH_INTERFRAMEGAP_96BIT ((uint32_t)0x00000000U) /*!< minimum IFG between frames during transmission is 96Bit */
+#define ETH_INTERFRAMEGAP_88BIT ((uint32_t)0x00020000U) /*!< minimum IFG between frames during transmission is 88Bit */
+#define ETH_INTERFRAMEGAP_80BIT ((uint32_t)0x00040000U) /*!< minimum IFG between frames during transmission is 80Bit */
+#define ETH_INTERFRAMEGAP_72BIT ((uint32_t)0x00060000U) /*!< minimum IFG between frames during transmission is 72Bit */
+#define ETH_INTERFRAMEGAP_64BIT ((uint32_t)0x00080000U) /*!< minimum IFG between frames during transmission is 64Bit */
+#define ETH_INTERFRAMEGAP_56BIT ((uint32_t)0x000A0000U) /*!< minimum IFG between frames during transmission is 56Bit */
+#define ETH_INTERFRAMEGAP_48BIT ((uint32_t)0x000C0000U) /*!< minimum IFG between frames during transmission is 48Bit */
+#define ETH_INTERFRAMEGAP_40BIT ((uint32_t)0x000E0000U) /*!< minimum IFG between frames during transmission is 40Bit */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Carrier_Sense ETH Carrier Sense
+ * @{
+ */
+#define ETH_CARRIERSENCE_ENABLE ((uint32_t)0x00000000U)
+#define ETH_CARRIERSENCE_DISABLE ((uint32_t)0x00010000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Own ETH Receive Own
+ * @{
+ */
+#define ETH_RECEIVEOWN_ENABLE ((uint32_t)0x00000000U)
+#define ETH_RECEIVEOWN_DISABLE ((uint32_t)0x00002000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Loop_Back_Mode ETH Loop Back Mode
+ * @{
+ */
+#define ETH_LOOPBACKMODE_ENABLE ((uint32_t)0x00001000U)
+#define ETH_LOOPBACKMODE_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Checksum_Offload ETH Checksum Offload
+ * @{
+ */
+#define ETH_CHECKSUMOFFLAOD_ENABLE ((uint32_t)0x00000400U)
+#define ETH_CHECKSUMOFFLAOD_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Retry_Transmission ETH Retry Transmission
+ * @{
+ */
+#define ETH_RETRYTRANSMISSION_ENABLE ((uint32_t)0x00000000U)
+#define ETH_RETRYTRANSMISSION_DISABLE ((uint32_t)0x00000200U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Automatic_Pad_CRC_Strip ETH Automatic Pad CRC Strip
+ * @{
+ */
+#define ETH_AUTOMATICPADCRCSTRIP_ENABLE ((uint32_t)0x00000080U)
+#define ETH_AUTOMATICPADCRCSTRIP_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Back_Off_Limit ETH Back Off Limit
+ * @{
+ */
+#define ETH_BACKOFFLIMIT_10 ((uint32_t)0x00000000U)
+#define ETH_BACKOFFLIMIT_8 ((uint32_t)0x00000020U)
+#define ETH_BACKOFFLIMIT_4 ((uint32_t)0x00000040U)
+#define ETH_BACKOFFLIMIT_1 ((uint32_t)0x00000060U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Deferral_Check ETH Deferral Check
+ * @{
+ */
+#define ETH_DEFFERRALCHECK_ENABLE ((uint32_t)0x00000010U)
+#define ETH_DEFFERRALCHECK_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_All ETH Receive All
+ * @{
+ */
+#define ETH_RECEIVEALL_ENABLE ((uint32_t)0x80000000U)
+#define ETH_RECEIVEAll_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Source_Addr_Filter ETH Source Addr Filter
+ * @{
+ */
+#define ETH_SOURCEADDRFILTER_NORMAL_ENABLE ((uint32_t)0x00000200U)
+#define ETH_SOURCEADDRFILTER_INVERSE_ENABLE ((uint32_t)0x00000300U)
+#define ETH_SOURCEADDRFILTER_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Pass_Control_Frames ETH Pass Control Frames
+ * @{
+ */
+#define ETH_PASSCONTROLFRAMES_BLOCKALL ((uint32_t)0x00000040U) /*!< MAC filters all control frames from reaching the application */
+#define ETH_PASSCONTROLFRAMES_FORWARDALL ((uint32_t)0x00000080U) /*!< MAC forwards all control frames to application even if they fail the Address Filter */
+#define ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER ((uint32_t)0x000000C0U) /*!< MAC forwards control frames that pass the Address Filter. */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Broadcast_Frames_Reception ETH Broadcast Frames Reception
+ * @{
+ */
+#define ETH_BROADCASTFRAMESRECEPTION_ENABLE ((uint32_t)0x00000000U)
+#define ETH_BROADCASTFRAMESRECEPTION_DISABLE ((uint32_t)0x00000020U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Destination_Addr_Filter ETH Destination Addr Filter
+ * @{
+ */
+#define ETH_DESTINATIONADDRFILTER_NORMAL ((uint32_t)0x00000000U)
+#define ETH_DESTINATIONADDRFILTER_INVERSE ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Promiscuous_Mode ETH Promiscuous Mode
+ * @{
+ */
+#define ETH_PROMISCUOUS_MODE_ENABLE ((uint32_t)0x00000001U)
+#define ETH_PROMISCUOUS_MODE_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Multicast_Frames_Filter ETH Multicast Frames Filter
+ * @{
+ */
+#define ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE ((uint32_t)0x00000404U)
+#define ETH_MULTICASTFRAMESFILTER_HASHTABLE ((uint32_t)0x00000004U)
+#define ETH_MULTICASTFRAMESFILTER_PERFECT ((uint32_t)0x00000000U)
+#define ETH_MULTICASTFRAMESFILTER_NONE ((uint32_t)0x00000010U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Unicast_Frames_Filter ETH Unicast Frames Filter
+ * @{
+ */
+#define ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE ((uint32_t)0x00000402U)
+#define ETH_UNICASTFRAMESFILTER_HASHTABLE ((uint32_t)0x00000002U)
+#define ETH_UNICASTFRAMESFILTER_PERFECT ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Zero_Quanta_Pause ETH Zero Quanta Pause
+ * @{
+ */
+#define ETH_ZEROQUANTAPAUSE_ENABLE ((uint32_t)0x00000000U)
+#define ETH_ZEROQUANTAPAUSE_DISABLE ((uint32_t)0x00000080U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Pause_Low_Threshold ETH Pause Low Threshold
+ * @{
+ */
+#define ETH_PAUSELOWTHRESHOLD_MINUS4 ((uint32_t)0x00000000U) /*!< Pause time minus 4 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS28 ((uint32_t)0x00000010U) /*!< Pause time minus 28 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS144 ((uint32_t)0x00000020U) /*!< Pause time minus 144 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS256 ((uint32_t)0x00000030U) /*!< Pause time minus 256 slot times */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Unicast_Pause_Frame_Detect ETH Unicast Pause Frame Detect
+ * @{
+ */
+#define ETH_UNICASTPAUSEFRAMEDETECT_ENABLE ((uint32_t)0x00000008U)
+#define ETH_UNICASTPAUSEFRAMEDETECT_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Flow_Control ETH Receive Flow Control
+ * @{
+ */
+#define ETH_RECEIVEFLOWCONTROL_ENABLE ((uint32_t)0x00000004U)
+#define ETH_RECEIVEFLOWCONTROL_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Transmit_Flow_Control ETH Transmit Flow Control
+ * @{
+ */
+#define ETH_TRANSMITFLOWCONTROL_ENABLE ((uint32_t)0x00000002U)
+#define ETH_TRANSMITFLOWCONTROL_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_VLAN_Tag_Comparison ETH VLAN Tag Comparison
+ * @{
+ */
+#define ETH_VLANTAGCOMPARISON_12BIT ((uint32_t)0x00010000U)
+#define ETH_VLANTAGCOMPARISON_16BIT ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_addresses ETH MAC addresses
+ * @{
+ */
+#define ETH_MAC_ADDRESS0 ((uint32_t)0x00000000U)
+#define ETH_MAC_ADDRESS1 ((uint32_t)0x00000008U)
+#define ETH_MAC_ADDRESS2 ((uint32_t)0x00000010U)
+#define ETH_MAC_ADDRESS3 ((uint32_t)0x00000018U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_addresses_filter_SA_DA ETH MAC addresses filter SA DA
+ * @{
+ */
+#define ETH_MAC_ADDRESSFILTER_SA ((uint32_t)0x00000000U)
+#define ETH_MAC_ADDRESSFILTER_DA ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_addresses_filter_Mask_bytes ETH MAC addresses filter Mask bytes
+ * @{
+ */
+#define ETH_MAC_ADDRESSMASK_BYTE6 ((uint32_t)0x20000000U) /*!< Mask MAC Address high reg bits [15:8] */
+#define ETH_MAC_ADDRESSMASK_BYTE5 ((uint32_t)0x10000000U) /*!< Mask MAC Address high reg bits [7:0] */
+#define ETH_MAC_ADDRESSMASK_BYTE4 ((uint32_t)0x08000000U) /*!< Mask MAC Address low reg bits [31:24] */
+#define ETH_MAC_ADDRESSMASK_BYTE3 ((uint32_t)0x04000000U) /*!< Mask MAC Address low reg bits [23:16] */
+#define ETH_MAC_ADDRESSMASK_BYTE2 ((uint32_t)0x02000000U) /*!< Mask MAC Address low reg bits [15:8] */
+#define ETH_MAC_ADDRESSMASK_BYTE1 ((uint32_t)0x01000000U) /*!< Mask MAC Address low reg bits [70] */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Drop_TCP_IP_Checksum_Error_Frame ETH Drop TCP IP Checksum Error Frame
+ * @{
+ */
+#define ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE ((uint32_t)0x00000000U)
+#define ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE ((uint32_t)0x04000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Store_Forward ETH Receive Store Forward
+ * @{
+ */
+#define ETH_RECEIVESTOREFORWARD_ENABLE ((uint32_t)0x02000000U)
+#define ETH_RECEIVESTOREFORWARD_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Flush_Received_Frame ETH Flush Received Frame
+ * @{
+ */
+#define ETH_FLUSHRECEIVEDFRAME_ENABLE ((uint32_t)0x00000000U)
+#define ETH_FLUSHRECEIVEDFRAME_DISABLE ((uint32_t)0x01000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Transmit_Store_Forward ETH Transmit Store Forward
+ * @{
+ */
+#define ETH_TRANSMITSTOREFORWARD_ENABLE ((uint32_t)0x00200000U)
+#define ETH_TRANSMITSTOREFORWARD_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Transmit_Threshold_Control ETH Transmit Threshold Control
+ * @{
+ */
+#define ETH_TRANSMITTHRESHOLDCONTROL_64BYTES ((uint32_t)0x00000000U) /*!< threshold level of the MTL Transmit FIFO is 64 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_128BYTES ((uint32_t)0x00004000U) /*!< threshold level of the MTL Transmit FIFO is 128 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_192BYTES ((uint32_t)0x00008000U) /*!< threshold level of the MTL Transmit FIFO is 192 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_256BYTES ((uint32_t)0x0000C000U) /*!< threshold level of the MTL Transmit FIFO is 256 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_40BYTES ((uint32_t)0x00010000U) /*!< threshold level of the MTL Transmit FIFO is 40 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_32BYTES ((uint32_t)0x00014000U) /*!< threshold level of the MTL Transmit FIFO is 32 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_24BYTES ((uint32_t)0x00018000U) /*!< threshold level of the MTL Transmit FIFO is 24 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_16BYTES ((uint32_t)0x0001C000U) /*!< threshold level of the MTL Transmit FIFO is 16 Bytes */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Forward_Error_Frames ETH Forward Error Frames
+ * @{
+ */
+#define ETH_FORWARDERRORFRAMES_ENABLE ((uint32_t)0x00000080U)
+#define ETH_FORWARDERRORFRAMES_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Forward_Undersized_Good_Frames ETH Forward Undersized Good Frames
+ * @{
+ */
+#define ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE ((uint32_t)0x00000040U)
+#define ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Threshold_Control ETH Receive Threshold Control
+ * @{
+ */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES ((uint32_t)0x00000000U) /*!< threshold level of the MTL Receive FIFO is 64 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES ((uint32_t)0x00000008U) /*!< threshold level of the MTL Receive FIFO is 32 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES ((uint32_t)0x00000010U) /*!< threshold level of the MTL Receive FIFO is 96 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES ((uint32_t)0x00000018U) /*!< threshold level of the MTL Receive FIFO is 128 Bytes */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Second_Frame_Operate ETH Second Frame Operate
+ * @{
+ */
+#define ETH_SECONDFRAMEOPERARTE_ENABLE ((uint32_t)0x00000004U)
+#define ETH_SECONDFRAMEOPERARTE_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Address_Aligned_Beats ETH Address Aligned Beats
+ * @{
+ */
+#define ETH_ADDRESSALIGNEDBEATS_ENABLE ((uint32_t)0x02000000U)
+#define ETH_ADDRESSALIGNEDBEATS_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Fixed_Burst ETH Fixed Burst
+ * @{
+ */
+#define ETH_FIXEDBURST_ENABLE ((uint32_t)0x00010000U)
+#define ETH_FIXEDBURST_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Rx_DMA_Burst_Length ETH Rx DMA Burst Length
+ * @{
+ */
+#define ETH_RXDMABURSTLENGTH_1BEAT ((uint32_t)0x00020000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 1 */
+#define ETH_RXDMABURSTLENGTH_2BEAT ((uint32_t)0x00040000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 2 */
+#define ETH_RXDMABURSTLENGTH_4BEAT ((uint32_t)0x00080000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */
+#define ETH_RXDMABURSTLENGTH_8BEAT ((uint32_t)0x00100000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */
+#define ETH_RXDMABURSTLENGTH_16BEAT ((uint32_t)0x00200000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */
+#define ETH_RXDMABURSTLENGTH_32BEAT ((uint32_t)0x00400000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_4BEAT ((uint32_t)0x01020000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_8BEAT ((uint32_t)0x01040000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_16BEAT ((uint32_t)0x01080000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_32BEAT ((uint32_t)0x01100000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_64BEAT ((uint32_t)0x01200000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 64 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_128BEAT ((uint32_t)0x01400000U) /*!< maximum number of beats to be transferred in one RxDMA transaction is 128 */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Tx_DMA_Burst_Length ETH Tx DMA Burst Length
+ * @{
+ */
+#define ETH_TXDMABURSTLENGTH_1BEAT ((uint32_t)0x00000100U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */
+#define ETH_TXDMABURSTLENGTH_2BEAT ((uint32_t)0x00000200U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */
+#define ETH_TXDMABURSTLENGTH_4BEAT ((uint32_t)0x00000400U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+#define ETH_TXDMABURSTLENGTH_8BEAT ((uint32_t)0x00000800U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+#define ETH_TXDMABURSTLENGTH_16BEAT ((uint32_t)0x00001000U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+#define ETH_TXDMABURSTLENGTH_32BEAT ((uint32_t)0x00002000U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_4BEAT ((uint32_t)0x01000100U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_8BEAT ((uint32_t)0x01000200U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_16BEAT ((uint32_t)0x01000400U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_32BEAT ((uint32_t)0x01000800U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_64BEAT ((uint32_t)0x01001000U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_128BEAT ((uint32_t)0x01002000U) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Enhanced_descriptor_format ETH DMA Enhanced descriptor format
+ * @{
+ */
+#define ETH_DMAENHANCEDDESCRIPTOR_ENABLE ((uint32_t)0x00000080U)
+#define ETH_DMAENHANCEDDESCRIPTOR_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Arbitration ETH DMA Arbitration
+ * @{
+ */
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1 ((uint32_t)0x00000000U)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1 ((uint32_t)0x00004000U)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1 ((uint32_t)0x00008000U)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1 ((uint32_t)0x0000C000U)
+#define ETH_DMAARBITRATION_RXPRIORTX ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Tx_descriptor_segment ETH DMA Tx descriptor segment
+ * @{
+ */
+#define ETH_DMATXDESC_LASTSEGMENTS ((uint32_t)0x40000000U) /*!< Last Segment */
+#define ETH_DMATXDESC_FIRSTSEGMENT ((uint32_t)0x20000000U) /*!< First Segment */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Tx_descriptor_Checksum_Insertion_Control ETH DMA Tx descriptor Checksum Insertion Control
+ * @{
+ */
+#define ETH_DMATXDESC_CHECKSUMBYPASS ((uint32_t)0x00000000U) /*!< Checksum engine bypass */
+#define ETH_DMATXDESC_CHECKSUMIPV4HEADER ((uint32_t)0x00400000U) /*!< IPv4 header checksum insertion */
+#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT ((uint32_t)0x00800000U) /*!< TCP/UDP/ICMP checksum insertion. Pseudo header checksum is assumed to be present */
+#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL ((uint32_t)0x00C00000U) /*!< TCP/UDP/ICMP checksum fully in hardware including pseudo header */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Rx_descriptor_buffers ETH DMA Rx descriptor buffers
+ * @{
+ */
+#define ETH_DMARXDESC_BUFFER1 ((uint32_t)0x00000000U) /*!< DMA Rx Desc Buffer1 */
+#define ETH_DMARXDESC_BUFFER2 ((uint32_t)0x00000001U) /*!< DMA Rx Desc Buffer2 */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_PMT_Flags ETH PMT Flags
+ * @{
+ */
+#define ETH_PMT_FLAG_WUFFRPR ((uint32_t)0x80000000U) /*!< Wake-Up Frame Filter Register Pointer Reset */
+#define ETH_PMT_FLAG_WUFR ((uint32_t)0x00000040U) /*!< Wake-Up Frame Received */
+#define ETH_PMT_FLAG_MPR ((uint32_t)0x00000020U) /*!< Magic Packet Received */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MMC_Tx_Interrupts ETH MMC Tx Interrupts
+ * @{
+ */
+#define ETH_MMC_IT_TGF ((uint32_t)0x00200000U) /*!< When Tx good frame counter reaches half the maximum value */
+#define ETH_MMC_IT_TGFMSC ((uint32_t)0x00008000U) /*!< When Tx good multi col counter reaches half the maximum value */
+#define ETH_MMC_IT_TGFSC ((uint32_t)0x00004000U) /*!< When Tx good single col counter reaches half the maximum value */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MMC_Rx_Interrupts ETH MMC Rx Interrupts
+ * @{
+ */
+#define ETH_MMC_IT_RGUF ((uint32_t)0x10020000U) /*!< When Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMC_IT_RFAE ((uint32_t)0x10000040U) /*!< When Rx alignment error counter reaches half the maximum value */
+#define ETH_MMC_IT_RFCE ((uint32_t)0x10000020U) /*!< When Rx crc error counter reaches half the maximum value */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_Flags ETH MAC Flags
+ * @{
+ */
+#define ETH_MAC_FLAG_TST ((uint32_t)0x00000200U) /*!< Time stamp trigger flag (on MAC) */
+#define ETH_MAC_FLAG_MMCT ((uint32_t)0x00000040U) /*!< MMC transmit flag */
+#define ETH_MAC_FLAG_MMCR ((uint32_t)0x00000020U) /*!< MMC receive flag */
+#define ETH_MAC_FLAG_MMC ((uint32_t)0x00000010U) /*!< MMC flag (on MAC) */
+#define ETH_MAC_FLAG_PMT ((uint32_t)0x00000008U) /*!< PMT flag (on MAC) */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Flags ETH DMA Flags
+ * @{
+ */
+#define ETH_DMA_FLAG_TST ((uint32_t)0x20000000U) /*!< Time-stamp trigger interrupt (on DMA) */
+#define ETH_DMA_FLAG_PMT ((uint32_t)0x10000000U) /*!< PMT interrupt (on DMA) */
+#define ETH_DMA_FLAG_MMC ((uint32_t)0x08000000U) /*!< MMC interrupt (on DMA) */
+#define ETH_DMA_FLAG_DATATRANSFERERROR ((uint32_t)0x00800000U) /*!< Error bits 0-Rx DMA, 1-Tx DMA */
+#define ETH_DMA_FLAG_READWRITEERROR ((uint32_t)0x01000000U) /*!< Error bits 0-write transfer, 1-read transfer */
+#define ETH_DMA_FLAG_ACCESSERROR ((uint32_t)0x02000000U) /*!< Error bits 0-data buffer, 1-desc. access */
+#define ETH_DMA_FLAG_NIS ((uint32_t)0x00010000U) /*!< Normal interrupt summary flag */
+#define ETH_DMA_FLAG_AIS ((uint32_t)0x00008000U) /*!< Abnormal interrupt summary flag */
+#define ETH_DMA_FLAG_ER ((uint32_t)0x00004000U) /*!< Early receive flag */
+#define ETH_DMA_FLAG_FBE ((uint32_t)0x00002000U) /*!< Fatal bus error flag */
+#define ETH_DMA_FLAG_ET ((uint32_t)0x00000400U) /*!< Early transmit flag */
+#define ETH_DMA_FLAG_RWT ((uint32_t)0x00000200U) /*!< Receive watchdog timeout flag */
+#define ETH_DMA_FLAG_RPS ((uint32_t)0x00000100U) /*!< Receive process stopped flag */
+#define ETH_DMA_FLAG_RBU ((uint32_t)0x00000080U) /*!< Receive buffer unavailable flag */
+#define ETH_DMA_FLAG_R ((uint32_t)0x00000040U) /*!< Receive flag */
+#define ETH_DMA_FLAG_TU ((uint32_t)0x00000020U) /*!< Underflow flag */
+#define ETH_DMA_FLAG_RO ((uint32_t)0x00000010U) /*!< Overflow flag */
+#define ETH_DMA_FLAG_TJT ((uint32_t)0x00000008U) /*!< Transmit jabber timeout flag */
+#define ETH_DMA_FLAG_TBU ((uint32_t)0x00000004U) /*!< Transmit buffer unavailable flag */
+#define ETH_DMA_FLAG_TPS ((uint32_t)0x00000002U) /*!< Transmit process stopped flag */
+#define ETH_DMA_FLAG_T ((uint32_t)0x00000001U) /*!< Transmit flag */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_Interrupts ETH MAC Interrupts
+ * @{
+ */
+#define ETH_MAC_IT_TST ((uint32_t)0x00000200U) /*!< Time stamp trigger interrupt (on MAC) */
+#define ETH_MAC_IT_MMCT ((uint32_t)0x00000040U) /*!< MMC transmit interrupt */
+#define ETH_MAC_IT_MMCR ((uint32_t)0x00000020U) /*!< MMC receive interrupt */
+#define ETH_MAC_IT_MMC ((uint32_t)0x00000010U) /*!< MMC interrupt (on MAC) */
+#define ETH_MAC_IT_PMT ((uint32_t)0x00000008U) /*!< PMT interrupt (on MAC) */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Interrupts ETH DMA Interrupts
+ * @{
+ */
+#define ETH_DMA_IT_TST ((uint32_t)0x20000000U) /*!< Time-stamp trigger interrupt (on DMA) */
+#define ETH_DMA_IT_PMT ((uint32_t)0x10000000U) /*!< PMT interrupt (on DMA) */
+#define ETH_DMA_IT_MMC ((uint32_t)0x08000000U) /*!< MMC interrupt (on DMA) */
+#define ETH_DMA_IT_NIS ((uint32_t)0x00010000U) /*!< Normal interrupt summary */
+#define ETH_DMA_IT_AIS ((uint32_t)0x00008000U) /*!< Abnormal interrupt summary */
+#define ETH_DMA_IT_ER ((uint32_t)0x00004000U) /*!< Early receive interrupt */
+#define ETH_DMA_IT_FBE ((uint32_t)0x00002000U) /*!< Fatal bus error interrupt */
+#define ETH_DMA_IT_ET ((uint32_t)0x00000400U) /*!< Early transmit interrupt */
+#define ETH_DMA_IT_RWT ((uint32_t)0x00000200U) /*!< Receive watchdog timeout interrupt */
+#define ETH_DMA_IT_RPS ((uint32_t)0x00000100U) /*!< Receive process stopped interrupt */
+#define ETH_DMA_IT_RBU ((uint32_t)0x00000080U) /*!< Receive buffer unavailable interrupt */
+#define ETH_DMA_IT_R ((uint32_t)0x00000040U) /*!< Receive interrupt */
+#define ETH_DMA_IT_TU ((uint32_t)0x00000020U) /*!< Underflow interrupt */
+#define ETH_DMA_IT_RO ((uint32_t)0x00000010U) /*!< Overflow interrupt */
+#define ETH_DMA_IT_TJT ((uint32_t)0x00000008U) /*!< Transmit jabber timeout interrupt */
+#define ETH_DMA_IT_TBU ((uint32_t)0x00000004U) /*!< Transmit buffer unavailable interrupt */
+#define ETH_DMA_IT_TPS ((uint32_t)0x00000002U) /*!< Transmit process stopped interrupt */
+#define ETH_DMA_IT_T ((uint32_t)0x00000001U) /*!< Transmit interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_transmit_process_state ETH DMA transmit process state
+ * @{
+ */
+#define ETH_DMA_TRANSMITPROCESS_STOPPED ((uint32_t)0x00000000U) /*!< Stopped - Reset or Stop Tx Command issued */
+#define ETH_DMA_TRANSMITPROCESS_FETCHING ((uint32_t)0x00100000U) /*!< Running - fetching the Tx descriptor */
+#define ETH_DMA_TRANSMITPROCESS_WAITING ((uint32_t)0x00200000U) /*!< Running - waiting for status */
+#define ETH_DMA_TRANSMITPROCESS_READING ((uint32_t)0x00300000U) /*!< Running - reading the data from host memory */
+#define ETH_DMA_TRANSMITPROCESS_SUSPENDED ((uint32_t)0x00600000U) /*!< Suspended - Tx Descriptor unavailable */
+#define ETH_DMA_TRANSMITPROCESS_CLOSING ((uint32_t)0x00700000U) /*!< Running - closing Rx descriptor */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup ETH_DMA_receive_process_state ETH DMA receive process state
+ * @{
+ */
+#define ETH_DMA_RECEIVEPROCESS_STOPPED ((uint32_t)0x00000000U) /*!< Stopped - Reset or Stop Rx Command issued */
+#define ETH_DMA_RECEIVEPROCESS_FETCHING ((uint32_t)0x00020000U) /*!< Running - fetching the Rx descriptor */
+#define ETH_DMA_RECEIVEPROCESS_WAITING ((uint32_t)0x00060000U) /*!< Running - waiting for packet */
+#define ETH_DMA_RECEIVEPROCESS_SUSPENDED ((uint32_t)0x00080000U) /*!< Suspended - Rx Descriptor unavailable */
+#define ETH_DMA_RECEIVEPROCESS_CLOSING ((uint32_t)0x000A0000U) /*!< Running - closing descriptor */
+#define ETH_DMA_RECEIVEPROCESS_QUEUING ((uint32_t)0x000E0000U) /*!< Running - queuing the receive frame into host memory */
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_overflow ETH DMA overflow
+ * @{
+ */
+#define ETH_DMA_OVERFLOW_RXFIFOCOUNTER ((uint32_t)0x10000000U) /*!< Overflow bit for FIFO overflow counter */
+#define ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER ((uint32_t)0x00010000U) /*!< Overflow bit for missed frame counter */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_EXTI_LINE_WAKEUP ETH EXTI LINE WAKEUP
+ * @{
+ */
+#define ETH_EXTI_LINE_WAKEUP ((uint32_t)0x00080000U) /*!< External interrupt line 19 Connected to the ETH EXTI Line */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup ETH_Exported_Macros ETH Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+/** @brief Reset ETH handle state
+ * @param __HANDLE__ specifies the ETH handle.
+ * @retval None
+ */
+#define __HAL_ETH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ETH_STATE_RESET)
+
+/**
+ * @brief Checks whether the specified Ethernet DMA Tx Desc flag is set or not.
+ * @param __HANDLE__ ETH Handle
+ * @param __FLAG__ specifies the flag of TDES0 to check.
+ * @retval the ETH_DMATxDescFlag (SET or RESET).
+ */
+#define __HAL_ETH_DMATXDESC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->TxDesc->Status & (__FLAG__) == (__FLAG__))
+
+/**
+ * @brief Checks whether the specified Ethernet DMA Rx Desc flag is set or not.
+ * @param __HANDLE__ ETH Handle
+ * @param __FLAG__ specifies the flag of RDES0 to check.
+ * @retval the ETH_DMATxDescFlag (SET or RESET).
+ */
+#define __HAL_ETH_DMARXDESC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->RxDesc->Status & (__FLAG__) == (__FLAG__))
+
+/**
+ * @brief Enables the specified DMA Rx Desc receive interrupt.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMARXDESC_ENABLE_IT(__HANDLE__) ((__HANDLE__)->RxDesc->ControlBufferSize &=(~(uint32_t)ETH_DMARXDESC_DIC))
+
+/**
+ * @brief Disables the specified DMA Rx Desc receive interrupt.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMARXDESC_DISABLE_IT(__HANDLE__) ((__HANDLE__)->RxDesc->ControlBufferSize |= ETH_DMARXDESC_DIC)
+
+/**
+ * @brief Set the specified DMA Rx Desc Own bit.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMARXDESC_SET_OWN_BIT(__HANDLE__) ((__HANDLE__)->RxDesc->Status |= ETH_DMARXDESC_OWN)
+
+/**
+ * @brief Returns the specified Ethernet DMA Tx Desc collision count.
+ * @param __HANDLE__ ETH Handle
+ * @retval The Transmit descriptor collision counter value.
+ */
+#define __HAL_ETH_DMATXDESC_GET_COLLISION_COUNT(__HANDLE__) (((__HANDLE__)->TxDesc->Status & ETH_DMATXDESC_CC) >> ETH_DMATXDESC_COLLISION_COUNTSHIFT)
+
+/**
+ * @brief Set the specified DMA Tx Desc Own bit.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_SET_OWN_BIT(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_OWN)
+
+/**
+ * @brief Enables the specified DMA Tx Desc Transmit interrupt.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_ENABLE_IT(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_IC)
+
+/**
+ * @brief Disables the specified DMA Tx Desc Transmit interrupt.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_DISABLE_IT(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_IC)
+
+/**
+ * @brief Selects the specified Ethernet DMA Tx Desc Checksum Insertion.
+ * @param __HANDLE__ ETH Handle
+ * @param __CHECKSUM__ specifies is the DMA Tx desc checksum insertion.
+ * This parameter can be one of the following values:
+ * @arg ETH_DMATXDESC_CHECKSUMBYPASS : Checksum bypass
+ * @arg ETH_DMATXDESC_CHECKSUMIPV4HEADER : IPv4 header checksum
+ * @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT : TCP/UDP/ICMP checksum. Pseudo header checksum is assumed to be present
+ * @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL : TCP/UDP/ICMP checksum fully in hardware including pseudo header
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_CHECKSUM_INSERTION(__HANDLE__, __CHECKSUM__) ((__HANDLE__)->TxDesc->Status |= (__CHECKSUM__))
+
+/**
+ * @brief Enables the DMA Tx Desc CRC.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_CRC_ENABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DC)
+
+/**
+ * @brief Disables the DMA Tx Desc CRC.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_CRC_DISABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DC)
+
+/**
+ * @brief Enables the DMA Tx Desc padding for frame shorter than 64 bytes.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_ENABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DP)
+
+/**
+ * @brief Disables the DMA Tx Desc padding for frame shorter than 64 bytes.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_DISABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DP)
+
+/**
+ * @brief Enables the specified Ethernet MAC interrupts.
+ * @param __HANDLE__ ETH Handle
+ * @param __INTERRUPT__ specifies the Ethernet MAC interrupt sources to be
+ * enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg ETH_MAC_IT_TST : Time stamp trigger interrupt
+ * @arg ETH_MAC_IT_PMT : PMT interrupt
+ * @retval None
+ */
+#define __HAL_ETH_MAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIMR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified Ethernet MAC interrupts.
+ * @param __HANDLE__ ETH Handle
+ * @param __INTERRUPT__ specifies the Ethernet MAC interrupt sources to be
+ * enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg ETH_MAC_IT_TST : Time stamp trigger interrupt
+ * @arg ETH_MAC_IT_PMT : PMT interrupt
+ * @retval None
+ */
+#define __HAL_ETH_MAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIMR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Initiate a Pause Control Frame (Full-duplex only).
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_INITIATE_PAUSE_CONTROL_FRAME(__HANDLE__) ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Checks whether the Ethernet flow control busy bit is set or not.
+ * @param __HANDLE__ ETH Handle
+ * @retval The new state of flow control busy status bit (SET or RESET).
+ */
+#define __HAL_ETH_GET_FLOW_CONTROL_BUSY_STATUS(__HANDLE__) (((__HANDLE__)->Instance->MACFCR & ETH_MACFCR_FCBBPA) == ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Enables the MAC Back Pressure operation activation (Half-duplex only).
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Disables the MAC BackPressure operation activation (Half-duplex only).
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACFCR &= ~ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Checks whether the specified Ethernet MAC flag is set or not.
+ * @param __HANDLE__ ETH Handle
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg ETH_MAC_FLAG_TST : Time stamp trigger flag
+ * @arg ETH_MAC_FLAG_MMCT : MMC transmit flag
+ * @arg ETH_MAC_FLAG_MMCR : MMC receive flag
+ * @arg ETH_MAC_FLAG_MMC : MMC flag
+ * @arg ETH_MAC_FLAG_PMT : PMT flag
+ * @retval The state of Ethernet MAC flag.
+ */
+#define __HAL_ETH_MAC_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->MACSR &( __FLAG__)) == ( __FLAG__))
+
+/**
+ * @brief Enables the specified Ethernet DMA interrupts.
+ * @param __HANDLE__ ETH Handle
+ * @param __INTERRUPT__ specifies the Ethernet DMA interrupt sources to be
+ * enabled @ref ETH_DMA_Interrupts
+ * @retval None
+ */
+#define __HAL_ETH_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMAIER |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified Ethernet DMA interrupts.
+ * @param __HANDLE__ ETH Handle
+ * @param __INTERRUPT__ specifies the Ethernet DMA interrupt sources to be
+ * disabled. @ref ETH_DMA_Interrupts
+ * @retval None
+ */
+#define __HAL_ETH_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMAIER &= ~(__INTERRUPT__))
+
+/**
+ * @brief Clears the Ethernet DMA IT pending bit.
+ * @param __HANDLE__ ETH Handle
+ * @param __INTERRUPT__ specifies the interrupt pending bit to clear. @ref ETH_DMA_Interrupts
+ * @retval None
+ */
+#define __HAL_ETH_DMA_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMASR =(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified Ethernet DMA flag is set or not.
+* @param __HANDLE__ ETH Handle
+ * @param __FLAG__ specifies the flag to check. @ref ETH_DMA_Flags
+ * @retval The new state of ETH_DMA_FLAG (SET or RESET).
+ */
+#define __HAL_ETH_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->DMASR &( __FLAG__)) == ( __FLAG__))
+
+/**
+ * @brief Checks whether the specified Ethernet DMA flag is set or not.
+ * @param __HANDLE__ ETH Handle
+ * @param __FLAG__ specifies the flag to clear. @ref ETH_DMA_Flags
+ * @retval The new state of ETH_DMA_FLAG (SET or RESET).
+ */
+#define __HAL_ETH_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->DMASR = (__FLAG__))
+
+/**
+ * @brief Checks whether the specified Ethernet DMA overflow flag is set or not.
+ * @param __HANDLE__ ETH Handle
+ * @param __OVERFLOW__ specifies the DMA overflow flag to check.
+ * This parameter can be one of the following values:
+ * @arg ETH_DMA_OVERFLOW_RXFIFOCOUNTER : Overflow for FIFO Overflows Counter
+ * @arg ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER : Overflow for Buffer Unavailable Missed Frame Counter
+ * @retval The state of Ethernet DMA overflow Flag (SET or RESET).
+ */
+#define __HAL_ETH_GET_DMA_OVERFLOW_STATUS(__HANDLE__, __OVERFLOW__) (((__HANDLE__)->Instance->DMAMFBOCR & (__OVERFLOW__)) == (__OVERFLOW__))
+
+/**
+ * @brief Set the DMA Receive status watchdog timer register value
+ * @param __HANDLE__ ETH Handle
+ * @param __VALUE__ DMA Receive status watchdog timer register value
+ * @retval None
+ */
+#define __HAL_ETH_SET_RECEIVE_WATCHDOG_TIMER(__HANDLE__, __VALUE__) ((__HANDLE__)->Instance->DMARSWTR = (__VALUE__))
+
+/**
+ * @brief Enables any unicast packet filtered by the MAC address
+ * recognition to be a wake-up frame.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_GU)
+
+/**
+ * @brief Disables any unicast packet filtered by the MAC address
+ * recognition to be a wake-up frame.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_GU)
+
+/**
+ * @brief Enables the MAC Wake-Up Frame Detection.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_FRAME_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_WFE)
+
+/**
+ * @brief Disables the MAC Wake-Up Frame Detection.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_FRAME_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE)
+
+/**
+ * @brief Enables the MAC Magic Packet Detection.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MAGIC_PACKET_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_MPE)
+
+/**
+ * @brief Disables the MAC Magic Packet Detection.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MAGIC_PACKET_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE)
+
+/**
+ * @brief Enables the MAC Power Down.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_POWER_DOWN_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_PD)
+
+/**
+ * @brief Disables the MAC Power Down.
+ * @param __HANDLE__ ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_POWER_DOWN_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_PD)
+
+/**
+ * @brief Checks whether the specified Ethernet PMT flag is set or not.
+ * @param __HANDLE__ ETH Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg ETH_PMT_FLAG_WUFFRPR : Wake-Up Frame Filter Register Pointer Reset
+ * @arg ETH_PMT_FLAG_WUFR : Wake-Up Frame Received
+ * @arg ETH_PMT_FLAG_MPR : Magic Packet Received
+ * @retval The new state of Ethernet PMT Flag (SET or RESET).
+ */
+#define __HAL_ETH_GET_PMT_FLAG_STATUS(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->MACPMTCSR &( __FLAG__)) == ( __FLAG__))
+
+/**
+ * @brief Preset and Initialize the MMC counters to almost-full value: 0xFFFF_FFF0 (full - 16)
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_FULL_PRESET(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= (ETH_MMCCR_MCFHP | ETH_MMCCR_MCP))
+
+/**
+ * @brief Preset and Initialize the MMC counters to almost-half value: 0x7FFF_FFF0 (half - 16)
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_HALF_PRESET(__HANDLE__) do{(__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCFHP;\
+ (__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCP;} while (0)
+
+/**
+ * @brief Enables the MMC Counter Freeze.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_FREEZE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCF)
+
+/**
+ * @brief Disables the MMC Counter Freeze.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_FREEZE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCF)
+
+/**
+ * @brief Enables the MMC Reset On Read.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_RESET_ONREAD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_ROR)
+
+/**
+ * @brief Disables the MMC Reset On Read.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_RESET_ONREAD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_ROR)
+
+/**
+ * @brief Enables the MMC Counter Stop Rollover.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_CSR)
+
+/**
+ * @brief Disables the MMC Counter Stop Rollover.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CSR)
+
+/**
+ * @brief Resets the MMC Counters.
+ * @param __HANDLE__ ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTERS_RESET(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CR)
+
+/**
+ * @brief Enables the specified Ethernet MMC Rx interrupts.
+ * @param __HANDLE__ ETH Handle.
+ * @param __INTERRUPT__ specifies the Ethernet MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_RGUF : When Rx good unicast frames counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFAE : When Rx alignment error counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFCE : When Rx crc error counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_RX_IT_ENABLE(__HANDLE__, __INTERRUPT__) (__HANDLE__)->Instance->MMCRIMR &= ~((__INTERRUPT__) & 0xEFFFFFFF)
+/**
+ * @brief Disables the specified Ethernet MMC Rx interrupts.
+ * @param __HANDLE__ ETH Handle.
+ * @param __INTERRUPT__ specifies the Ethernet MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_RGUF : When Rx good unicast frames counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFAE : When Rx alignment error counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFCE : When Rx crc error counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_RX_IT_DISABLE(__HANDLE__, __INTERRUPT__) (__HANDLE__)->Instance->MMCRIMR |= ((__INTERRUPT__) & 0xEFFFFFFF)
+/**
+ * @brief Enables the specified Ethernet MMC Tx interrupts.
+ * @param __HANDLE__ ETH Handle.
+ * @param __INTERRUPT__ specifies the Ethernet MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_TGF : When Tx good frame counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_TX_IT_ENABLE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MMCRIMR &= ~ (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified Ethernet MMC Tx interrupts.
+ * @param __HANDLE__ ETH Handle.
+ * @param __INTERRUPT__ specifies the Ethernet MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_TGF : When Tx good frame counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_TX_IT_DISABLE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MMCRIMR |= (__INTERRUPT__))
+
+/**
+ * @brief Enables the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Disables the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Enable event on ETH External event line.
+ * @retval None.
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_EVENT() EXTI->EMR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Disable event on ETH External event line
+ * @retval None.
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_EVENT() EXTI->EMR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Get flag of the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Clear flag of the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Enables rising edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER() EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP
+
+/**
+ * @brief Disables the rising edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_RISING_EDGE_TRIGGER() EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Enables falling edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER() EXTI->FTSR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Disables falling edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_FALLING_EDGE_TRIGGER() EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Enables rising/falling edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER() do{EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP;\
+ EXTI->FTSR |= ETH_EXTI_LINE_WAKEUP;\
+ }while(0)
+
+/**
+ * @brief Disables rising/falling edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_FALLINGRISING_TRIGGER() do{EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP);\
+ EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP);\
+ }while(0)
+
+/**
+ * @brief Generate a Software interrupt on selected EXTI line.
+ * @retval None.
+ */
+#define __HAL_ETH_WAKEUP_EXTI_GENERATE_SWIT() EXTI->SWIER|= ETH_EXTI_LINE_WAKEUP
+
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup ETH_Exported_Functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+
+/** @addtogroup ETH_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t* TxBuff, uint32_t TxBuffCount);
+HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount);
+
+/**
+ * @}
+ */
+/* IO operation functions ****************************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group2
+ * @{
+ */
+HAL_StatusTypeDef HAL_ETH_TransmitFrame(ETH_HandleTypeDef *heth, uint32_t FrameLength);
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame(ETH_HandleTypeDef *heth);
+/* Communication with PHY functions*/
+HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue);
+HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t RegValue);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame_IT(ETH_HandleTypeDef *heth);
+void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth);
+/* Callback in non blocking modes (Interrupt) */
+void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions **********************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group3
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_ConfigMAC(ETH_HandleTypeDef *heth, ETH_MACInitTypeDef *macconf);
+HAL_StatusTypeDef HAL_ETH_ConfigDMA(ETH_HandleTypeDef *heth, ETH_DMAInitTypeDef *dmaconf);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group4
+ * @{
+ */
+HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* ETH */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_ETH_H */
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h
new file mode 100644
index 00000000..4f4ea732
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h
@@ -0,0 +1,424 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_flash.h
+ * @author MCD Application Team
+ * @brief Header file of FLASH HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_FLASH_H
+#define __STM32F7xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+ * @{
+ */
+
+/**
+ * @brief FLASH Procedure structure definition
+ */
+typedef enum
+{
+ FLASH_PROC_NONE = 0U,
+ FLASH_PROC_SECTERASE,
+ FLASH_PROC_MASSERASE,
+ FLASH_PROC_PROGRAM
+} FLASH_ProcedureTypeDef;
+
+
+/**
+ * @brief FLASH handle Structure definition
+ */
+typedef struct
+{
+ __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */
+
+ __IO uint32_t NbSectorsToErase; /* Internal variable to save the remaining sectors to erase in IT context */
+
+ __IO uint8_t VoltageForErase; /* Internal variable to provide voltage range selected by user in IT context */
+
+ __IO uint32_t Sector; /* Internal variable to define the current sector which is erasing */
+
+ __IO uint32_t Address; /* Internal variable to save address selected for program */
+
+ HAL_LockTypeDef Lock; /* FLASH locking object */
+
+ __IO uint32_t ErrorCode; /* FLASH error code */
+
+}FLASH_ProcessTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+
+/** @defgroup FLASH_Error_Code FLASH Error Code
+ * @brief FLASH Error Code
+ * @{
+ */
+#define HAL_FLASH_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_FLASH_ERROR_ERS ((uint32_t)0x00000002U) /*!< Programming Sequence error */
+#define HAL_FLASH_ERROR_PGP ((uint32_t)0x00000004U) /*!< Programming Parallelism error */
+#define HAL_FLASH_ERROR_PGA ((uint32_t)0x00000008U) /*!< Programming Alignment error */
+#define HAL_FLASH_ERROR_WRP ((uint32_t)0x00000010U) /*!< Write protection error */
+#define HAL_FLASH_ERROR_OPERATION ((uint32_t)0x00000020U) /*!< Operation Error */
+#define HAL_FLASH_ERROR_RD ((uint32_t)0x00000040U) /*!< Read Protection Error */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+ * @{
+ */
+#define FLASH_TYPEPROGRAM_BYTE ((uint32_t)0x00U) /*!< Program byte (8-bit) at a specified address */
+#define FLASH_TYPEPROGRAM_HALFWORD ((uint32_t)0x01U) /*!< Program a half-word (16-bit) at a specified address */
+#define FLASH_TYPEPROGRAM_WORD ((uint32_t)0x02U) /*!< Program a word (32-bit) at a specified address */
+#define FLASH_TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03U) /*!< Program a double word (64-bit) at a specified address */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Flag_definition FLASH Flag definition
+ * @brief Flag definition
+ * @{
+ */
+#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
+#define FLASH_FLAG_OPERR FLASH_SR_OPERR /*!< FLASH operation Error flag */
+#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
+#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */
+#define FLASH_FLAG_ERSERR FLASH_SR_ERSERR /*!< FLASH Erasing Sequence error flag */
+#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
+
+#if defined (FLASH_OPTCR2_PCROP)
+#define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< FLASH Read protection error flag */
+#define FLASH_FLAG_ALL_ERRORS (FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+ FLASH_FLAG_PGPERR | FLASH_FLAG_ERSERR | FLASH_FLAG_RDERR)
+#else
+#define FLASH_FLAG_ALL_ERRORS (FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+ FLASH_FLAG_PGPERR | FLASH_FLAG_ERSERR)
+#endif /* FLASH_OPTCR2_PCROP */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
+ * @brief FLASH Interrupt definition
+ * @{
+ */
+#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_ERR ((uint32_t)0x02000000U) /*!< Error Interrupt source */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
+ * @{
+ */
+#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000U)
+#define FLASH_PSIZE_HALF_WORD ((uint32_t)FLASH_CR_PSIZE_0)
+#define FLASH_PSIZE_WORD ((uint32_t)FLASH_CR_PSIZE_1)
+#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)FLASH_CR_PSIZE)
+#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFFU)
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Keys FLASH Keys
+ * @{
+ */
+#define FLASH_KEY1 ((uint32_t)0x45670123U)
+#define FLASH_KEY2 ((uint32_t)0xCDEF89ABU)
+#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3BU)
+#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7FU)
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Sectors FLASH Sectors
+ * @{
+ */
+#define FLASH_SECTOR_0 ((uint32_t)0U) /*!< Sector Number 0 */
+#define FLASH_SECTOR_1 ((uint32_t)1U) /*!< Sector Number 1 */
+#define FLASH_SECTOR_2 ((uint32_t)2U) /*!< Sector Number 2 */
+#define FLASH_SECTOR_3 ((uint32_t)3U) /*!< Sector Number 3 */
+#define FLASH_SECTOR_4 ((uint32_t)4U) /*!< Sector Number 4 */
+#define FLASH_SECTOR_5 ((uint32_t)5U) /*!< Sector Number 5 */
+#define FLASH_SECTOR_6 ((uint32_t)6U) /*!< Sector Number 6 */
+#define FLASH_SECTOR_7 ((uint32_t)7U) /*!< Sector Number 7 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
+ * @{
+ */
+/**
+ * @brief Set the FLASH Latency.
+ * @param __LATENCY__ FLASH Latency
+ * The value of this parameter depend on device used within the same series
+ * @retval none
+ */
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) \
+ MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(__LATENCY__))
+
+/**
+ * @brief Get the FLASH Latency.
+ * @retval FLASH Latency
+ * The value of this parameter depend on device used within the same series
+ */
+#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
+
+/**
+ * @brief Enable the FLASH prefetch buffer.
+ * @retval none
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN)
+
+/**
+ * @brief Disable the FLASH prefetch buffer.
+ * @retval none
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
+
+/**
+ * @brief Enable the FLASH Adaptive Real-Time memory accelerator.
+ * @note The ART accelerator is available only for flash access on ITCM interface.
+ * @retval none
+ */
+#define __HAL_FLASH_ART_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_ARTEN)
+
+/**
+ * @brief Disable the FLASH Adaptive Real-Time memory accelerator.
+ * @retval none
+ */
+#define __HAL_FLASH_ART_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_ARTEN)
+
+/**
+ * @brief Resets the FLASH Adaptive Real-Time memory accelerator.
+ * @note This function must be used only when the Adaptive Real-Time memory accelerator
+ * is disabled.
+ * @retval None
+ */
+#define __HAL_FLASH_ART_RESET() (FLASH->ACR |= FLASH_ACR_ARTRST)
+
+/**
+ * @brief Enable the specified FLASH interrupt.
+ * @param __INTERRUPT__ FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified FLASH interrupt.
+ * @param __INTERRUPT__ FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
+
+/**
+ * @brief Get the specified FLASH flag status.
+ * @param __FLAG__ specifies the FLASH flag to check.
+ * This parameter can be one of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPERR : FLASH operation Error flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
+ * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+ * @arg FLASH_FLAG_ERSERR : FLASH Erasing Sequence error flag
+ * @arg FLASH_FLAG_BSY : FLASH Busy flag
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)))
+
+/**
+ * @brief Clear the specified FLASH flag.
+ * @param __FLAG__ specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPERR : FLASH operation Error flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
+ * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+ * @arg FLASH_FLAG_ERSERR : FLASH Erasing Sequence error flag
+ * @retval none
+ */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
+/**
+ * @}
+ */
+
+/* Include FLASH HAL Extension module */
+#include "stm32f7xx_hal_flash_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_Exported_Functions
+ * @{
+ */
+/** @addtogroup FLASH_Exported_Functions_Group1
+ * @{
+ */
+/* Program operation functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+/* FLASH IRQ handler method */
+void HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */
+void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions **********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+/* Option bytes control */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+uint32_t HAL_FLASH_GetError(void);
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Variables FLASH Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Constants FLASH Private Constants
+ * @{
+ */
+
+/**
+ * @brief OPTCR register byte 1 (Bits[15:8]) base address
+ */
+#define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15)
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FLASH_Private_Macros FLASH Private Macros
+ * @{
+ */
+
+/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters
+ * @{
+ */
+#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Functions FLASH Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h
new file mode 100644
index 00000000..a2bbd5b4
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h
@@ -0,0 +1,661 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_flash_ex.h
+ * @author MCD Application Team
+ * @brief Header file of FLASH HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_FLASH_EX_H
+#define __STM32F7xx_HAL_FLASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASHEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Types FLASH Exported Types
+ * @{
+ */
+
+/**
+ * @brief FLASH Erase structure definition
+ */
+typedef struct
+{
+ uint32_t TypeErase; /*!< Mass erase or sector Erase.
+ This parameter can be a value of @ref FLASHEx_Type_Erase */
+
+#if defined (FLASH_OPTCR_nDBANK)
+ uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled.
+ This parameter must be a value of @ref FLASHEx_Banks */
+#endif /* FLASH_OPTCR_nDBANK */
+
+ uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled
+ This parameter must be a value of @ref FLASHEx_Sectors */
+
+ uint32_t NbSectors; /*!< Number of sectors to be erased.
+ This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/
+
+ uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism
+ This parameter must be a value of @ref FLASHEx_Voltage_Range */
+
+} FLASH_EraseInitTypeDef;
+
+/**
+ * @brief FLASH Option Bytes Program structure definition
+ */
+typedef struct
+{
+ uint32_t OptionType; /*!< Option byte to be configured.
+ This parameter can be a value of @ref FLASHEx_Option_Type */
+
+ uint32_t WRPState; /*!< Write protection activation or deactivation.
+ This parameter can be a value of @ref FLASHEx_WRP_State */
+
+ uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected.
+ The value of this parameter depend on device used within the same series */
+
+ uint32_t RDPLevel; /*!< Set the read protection level.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */
+
+ uint32_t BORLevel; /*!< Set the BOR Level.
+ This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */
+
+ uint32_t USERConfig; /*!< Program the FLASH User Option Byte: WWDG_SW / IWDG_SW / RST_STOP / RST_STDBY /
+ IWDG_FREEZE_STOP / IWDG_FREEZE_SANDBY / nDBANK / nDBOOT.
+ nDBANK / nDBOOT are only available for STM32F76xxx/STM32F77xxx devices */
+
+ uint32_t BootAddr0; /*!< Boot base address when Boot pin = 0.
+ This parameter can be a value of @ref FLASHEx_Boot_Address */
+
+ uint32_t BootAddr1; /*!< Boot base address when Boot pin = 1.
+ This parameter can be a value of @ref FLASHEx_Boot_Address */
+
+#if defined (FLASH_OPTCR2_PCROP)
+ uint32_t PCROPSector; /*!< Set the PCROP sector.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_PCROP_Sectors */
+
+ uint32_t PCROPRdp; /*!< Set the PCROP_RDP option.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_PCROP_RDP */
+#endif /* FLASH_OPTCR2_PCROP */
+
+} FLASH_OBProgramInitTypeDef;
+
+/**
+ * @}
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+
+/** @defgroup FLASHEx_Type_Erase FLASH Type Erase
+ * @{
+ */
+#define FLASH_TYPEERASE_SECTORS ((uint32_t)0x00U) /*!< Sectors erase only */
+#define FLASH_TYPEERASE_MASSERASE ((uint32_t)0x01U) /*!< Flash Mass erase activation */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range
+ * @{
+ */
+#define FLASH_VOLTAGE_RANGE_1 ((uint32_t)0x00U) /*!< Device operating range: 1.8V to 2.1V */
+#define FLASH_VOLTAGE_RANGE_2 ((uint32_t)0x01U) /*!< Device operating range: 2.1V to 2.7V */
+#define FLASH_VOLTAGE_RANGE_3 ((uint32_t)0x02U) /*!< Device operating range: 2.7V to 3.6V */
+#define FLASH_VOLTAGE_RANGE_4 ((uint32_t)0x03U) /*!< Device operating range: 2.7V to 3.6V + External Vpp */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_WRP_State FLASH WRP State
+ * @{
+ */
+#define OB_WRPSTATE_DISABLE ((uint32_t)0x00U) /*!< Disable the write protection of the desired bank 1 sectors */
+#define OB_WRPSTATE_ENABLE ((uint32_t)0x01U) /*!< Enable the write protection of the desired bank 1 sectors */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Type FLASH Option Type
+ * @{
+ */
+#define OPTIONBYTE_WRP ((uint32_t)0x01U) /*!< WRP option byte configuration */
+#define OPTIONBYTE_RDP ((uint32_t)0x02U) /*!< RDP option byte configuration */
+#define OPTIONBYTE_USER ((uint32_t)0x04U) /*!< USER option byte configuration */
+#define OPTIONBYTE_BOR ((uint32_t)0x08U) /*!< BOR option byte configuration */
+#define OPTIONBYTE_BOOTADDR_0 ((uint32_t)0x10U) /*!< Boot 0 Address configuration */
+#define OPTIONBYTE_BOOTADDR_1 ((uint32_t)0x20U) /*!< Boot 1 Address configuration */
+#if defined (FLASH_OPTCR2_PCROP)
+#define OPTIONBYTE_PCROP ((uint32_t)0x40U) /*!< PCROP configuration */
+#define OPTIONBYTE_PCROP_RDP ((uint32_t)0x80U) /*!< PCROP_RDP configuration */
+#endif /* FLASH_OPTCR2_PCROP */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection
+ * @{
+ */
+#define OB_RDP_LEVEL_0 ((uint8_t)0xAAU)
+#define OB_RDP_LEVEL_1 ((uint8_t)0x55U)
+#define OB_RDP_LEVEL_2 ((uint8_t)0xCCU) /*!< Warning: When enabling read protection level 2
+ it s no more possible to go back to level 1 or 0 */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_WWatchdog FLASH Option Bytes WWatchdog
+ * @{
+ */
+#define OB_WWDG_SW ((uint32_t)0x10U) /*!< Software WWDG selected */
+#define OB_WWDG_HW ((uint32_t)0x00U) /*!< Hardware WWDG selected */
+/**
+ * @}
+ */
+
+
+/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog
+ * @{
+ */
+#define OB_IWDG_SW ((uint32_t)0x20U) /*!< Software IWDG selected */
+#define OB_IWDG_HW ((uint32_t)0x00U) /*!< Hardware IWDG selected */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP
+ * @{
+ */
+#define OB_STOP_NO_RST ((uint32_t)0x40U) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST ((uint32_t)0x00U) /*!< Reset generated when entering in STOP */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY
+ * @{
+ */
+#define OB_STDBY_NO_RST ((uint32_t)0x80U) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST ((uint32_t)0x00U) /*!< Reset generated when entering in STANDBY */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_IWDG_FREEZE_STOP FLASH IWDG Counter Freeze in STOP
+ * @{
+ */
+#define OB_IWDG_STOP_FREEZE ((uint32_t)0x00000000U) /*!< Freeze IWDG counter in STOP mode */
+#define OB_IWDG_STOP_ACTIVE ((uint32_t)0x80000000U) /*!< IWDG counter active in STOP mode */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_IWDG_FREEZE_SANDBY FLASH IWDG Counter Freeze in STANDBY
+ * @{
+ */
+#define OB_IWDG_STDBY_FREEZE ((uint32_t)0x00000000U) /*!< Freeze IWDG counter in STANDBY mode */
+#define OB_IWDG_STDBY_ACTIVE ((uint32_t)0x40000000U) /*!< IWDG counter active in STANDBY mode */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level
+ * @{
+ */
+#define OB_BOR_LEVEL3 ((uint32_t)0x00U) /*!< Supply voltage ranges from 2.70 to 3.60 V */
+#define OB_BOR_LEVEL2 ((uint32_t)0x04U) /*!< Supply voltage ranges from 2.40 to 2.70 V */
+#define OB_BOR_LEVEL1 ((uint32_t)0x08U) /*!< Supply voltage ranges from 2.10 to 2.40 V */
+#define OB_BOR_OFF ((uint32_t)0x0CU) /*!< Supply voltage ranges from 1.62 to 2.10 V */
+/**
+ * @}
+ */
+
+#if defined (FLASH_OPTCR_nDBOOT)
+/** @defgroup FLASHEx_Option_Bytes_nDBOOT FLASH Option Bytes nDBOOT
+ * @{
+ */
+#define OB_DUAL_BOOT_DISABLE ((uint32_t)0x10000000U) /* !< Dual Boot disable. Boot according to boot address option */
+#define OB_DUAL_BOOT_ENABLE ((uint32_t)0x00000000U) /* !< Dual Boot enable. Boot always from system memory if boot address in flash
+ (Dual bank Boot mode), or RAM if Boot address option in RAM */
+/**
+ * @}
+ */
+#endif /* FLASH_OPTCR_nDBOOT */
+
+#if defined (FLASH_OPTCR_nDBANK)
+/** @defgroup FLASHEx_Option_Bytes_nDBank FLASH Single Bank or Dual Bank
+ * @{
+ */
+#define OB_NDBANK_SINGLE_BANK ((uint32_t)0x20000000U) /*!< NDBANK bit is set : Single Bank mode */
+#define OB_NDBANK_DUAL_BANK ((uint32_t)0x00000000U) /*!< NDBANK bit is reset : Dual Bank mode */
+/**
+ * @}
+ */
+#endif /* FLASH_OPTCR_nDBANK */
+
+/** @defgroup FLASHEx_Boot_Address FLASH Boot Address
+ * @{
+ */
+#define OB_BOOTADDR_ITCM_RAM ((uint32_t)0x0000U) /*!< Boot from ITCM RAM (0x00000000) */
+#define OB_BOOTADDR_SYSTEM ((uint32_t)0x0040U) /*!< Boot from System memory bootloader (0x00100000) */
+#define OB_BOOTADDR_ITCM_FLASH ((uint32_t)0x0080U) /*!< Boot from Flash on ITCM interface (0x00200000) */
+#define OB_BOOTADDR_AXIM_FLASH ((uint32_t)0x2000U) /*!< Boot from Flash on AXIM interface (0x08000000) */
+#define OB_BOOTADDR_DTCM_RAM ((uint32_t)0x8000U) /*!< Boot from DTCM RAM (0x20000000) */
+#define OB_BOOTADDR_SRAM1 ((uint32_t)0x8004U) /*!< Boot from SRAM1 (0x20010000) */
+#if (SRAM2_BASE == 0x2003C000U)
+#define OB_BOOTADDR_SRAM2 ((uint32_t)0x800FU) /*!< Boot from SRAM2 (0x2003C000) */
+#else
+#define OB_BOOTADDR_SRAM2 ((uint32_t)0x8013U) /*!< Boot from SRAM2 (0x2004C000) */
+#endif /* SRAM2_BASE == 0x2003C000U */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Latency FLASH Latency
+ * @{
+ */
+#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */
+#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */
+#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */
+#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */
+#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */
+#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */
+#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */
+#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */
+#define FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH Eight Latency cycles */
+#define FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH Nine Latency cycles */
+#define FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH Ten Latency cycles */
+#define FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH Eleven Latency cycles */
+#define FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH Twelve Latency cycles */
+#define FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH Thirteen Latency cycles */
+#define FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH Fourteen Latency cycles */
+#define FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH Fifteen Latency cycles */
+/**
+ * @}
+ */
+
+#if defined (FLASH_OPTCR_nDBANK)
+/** @defgroup FLASHEx_Banks FLASH Banks
+ * @{
+ */
+#define FLASH_BANK_1 ((uint32_t)0x01U) /*!< Bank 1 */
+#define FLASH_BANK_2 ((uint32_t)0x02U) /*!< Bank 2 */
+#define FLASH_BANK_BOTH ((uint32_t)(FLASH_BANK_1 | FLASH_BANK_2)) /*!< Bank1 and Bank2 */
+/**
+ * @}
+ */
+#endif /* FLASH_OPTCR_nDBANK */
+
+/** @defgroup FLASHEx_MassErase_bit FLASH Mass Erase bit
+ * @{
+ */
+#if defined (FLASH_OPTCR_nDBANK)
+#define FLASH_MER_BIT (FLASH_CR_MER1 | FLASH_CR_MER2) /*!< 2 MER bits */
+#else
+#define FLASH_MER_BIT (FLASH_CR_MER) /*!< only 1 MER bit */
+#endif /* FLASH_OPTCR_nDBANK */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Sectors FLASH Sectors
+ * @{
+ */
+#if (FLASH_SECTOR_TOTAL == 24)
+#define FLASH_SECTOR_8 ((uint32_t)8U) /*!< Sector Number 8 */
+#define FLASH_SECTOR_9 ((uint32_t)9U) /*!< Sector Number 9 */
+#define FLASH_SECTOR_10 ((uint32_t)10U) /*!< Sector Number 10 */
+#define FLASH_SECTOR_11 ((uint32_t)11U) /*!< Sector Number 11 */
+#define FLASH_SECTOR_12 ((uint32_t)12U) /*!< Sector Number 12 */
+#define FLASH_SECTOR_13 ((uint32_t)13U) /*!< Sector Number 13 */
+#define FLASH_SECTOR_14 ((uint32_t)14U) /*!< Sector Number 14 */
+#define FLASH_SECTOR_15 ((uint32_t)15U) /*!< Sector Number 15 */
+#define FLASH_SECTOR_16 ((uint32_t)16U) /*!< Sector Number 16 */
+#define FLASH_SECTOR_17 ((uint32_t)17U) /*!< Sector Number 17 */
+#define FLASH_SECTOR_18 ((uint32_t)18U) /*!< Sector Number 18 */
+#define FLASH_SECTOR_19 ((uint32_t)19U) /*!< Sector Number 19 */
+#define FLASH_SECTOR_20 ((uint32_t)20U) /*!< Sector Number 20 */
+#define FLASH_SECTOR_21 ((uint32_t)21U) /*!< Sector Number 21 */
+#define FLASH_SECTOR_22 ((uint32_t)22U) /*!< Sector Number 22 */
+#define FLASH_SECTOR_23 ((uint32_t)23U) /*!< Sector Number 23 */
+#endif /* FLASH_SECTOR_TOTAL == 24 */
+/**
+ * @}
+ */
+
+#if (FLASH_SECTOR_TOTAL == 24)
+/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
+ * @note For Single Bank mode, use OB_WRP_SECTOR_x defines: In fact, in FLASH_OPTCR register,
+ * nWRP[11:0] bits contain the value of the write-protection option bytes for sectors 0 to 11.
+ * For Dual Bank mode, use OB_WRP_DB_SECTOR_x defines: In fact, in FLASH_OPTCR register,
+ * nWRP[11:0] bits are divided on two groups, one group dedicated for bank 1 and
+ * a second one dedicated for bank 2 (nWRP[i] activates Write protection on sector 2*i and 2*i+1).
+ * This behavior is applicable only for STM32F76xxx / STM32F77xxx devices.
+ * @{
+ */
+/* Single Bank Sectors */
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Single Bank Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00020000U) /*!< Write protection of Single Bank Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00040000U) /*!< Write protection of Single Bank Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00080000U) /*!< Write protection of Single Bank Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00100000U) /*!< Write protection of Single Bank Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00200000U) /*!< Write protection of Single Bank Sector5 */
+#define OB_WRP_SECTOR_6 ((uint32_t)0x00400000U) /*!< Write protection of Single Bank Sector6 */
+#define OB_WRP_SECTOR_7 ((uint32_t)0x00800000U) /*!< Write protection of Single Bank Sector7 */
+#define OB_WRP_SECTOR_8 ((uint32_t)0x01000000U) /*!< Write protection of Single Bank Sector8 */
+#define OB_WRP_SECTOR_9 ((uint32_t)0x02000000U) /*!< Write protection of Single Bank Sector9 */
+#define OB_WRP_SECTOR_10 ((uint32_t)0x04000000U) /*!< Write protection of Single Bank Sector10 */
+#define OB_WRP_SECTOR_11 ((uint32_t)0x08000000U) /*!< Write protection of Single Bank Sector11 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x0FFF0000U) /*!< Write protection of all Sectors for Single Bank Flash */
+
+/* Dual Bank Sectors */
+#define OB_WRP_DB_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Dual Bank Sector0 */
+#define OB_WRP_DB_SECTOR_1 ((uint32_t)0x00010000U) /*!< Write protection of Dual Bank Sector1 */
+#define OB_WRP_DB_SECTOR_2 ((uint32_t)0x00020000U) /*!< Write protection of Dual Bank Sector2 */
+#define OB_WRP_DB_SECTOR_3 ((uint32_t)0x00020000U) /*!< Write protection of Dual Bank Sector3 */
+#define OB_WRP_DB_SECTOR_4 ((uint32_t)0x00040000U) /*!< Write protection of Dual Bank Sector4 */
+#define OB_WRP_DB_SECTOR_5 ((uint32_t)0x00040000U) /*!< Write protection of Dual Bank Sector5 */
+#define OB_WRP_DB_SECTOR_6 ((uint32_t)0x00080000U) /*!< Write protection of Dual Bank Sector6 */
+#define OB_WRP_DB_SECTOR_7 ((uint32_t)0x00080000U) /*!< Write protection of Dual Bank Sector7 */
+#define OB_WRP_DB_SECTOR_8 ((uint32_t)0x00100000U) /*!< Write protection of Dual Bank Sector8 */
+#define OB_WRP_DB_SECTOR_9 ((uint32_t)0x00100000U) /*!< Write protection of Dual Bank Sector9 */
+#define OB_WRP_DB_SECTOR_10 ((uint32_t)0x00200000U) /*!< Write protection of Dual Bank Sector10 */
+#define OB_WRP_DB_SECTOR_11 ((uint32_t)0x00200000U) /*!< Write protection of Dual Bank Sector11 */
+#define OB_WRP_DB_SECTOR_12 ((uint32_t)0x00400000U) /*!< Write protection of Dual Bank Sector12 */
+#define OB_WRP_DB_SECTOR_13 ((uint32_t)0x00400000U) /*!< Write protection of Dual Bank Sector13 */
+#define OB_WRP_DB_SECTOR_14 ((uint32_t)0x00800000U) /*!< Write protection of Dual Bank Sector14 */
+#define OB_WRP_DB_SECTOR_15 ((uint32_t)0x00800000U) /*!< Write protection of Dual Bank Sector15 */
+#define OB_WRP_DB_SECTOR_16 ((uint32_t)0x01000000U) /*!< Write protection of Dual Bank Sector16 */
+#define OB_WRP_DB_SECTOR_17 ((uint32_t)0x01000000U) /*!< Write protection of Dual Bank Sector17 */
+#define OB_WRP_DB_SECTOR_18 ((uint32_t)0x02000000U) /*!< Write protection of Dual Bank Sector18 */
+#define OB_WRP_DB_SECTOR_19 ((uint32_t)0x02000000U) /*!< Write protection of Dual Bank Sector19 */
+#define OB_WRP_DB_SECTOR_20 ((uint32_t)0x04000000U) /*!< Write protection of Dual Bank Sector20 */
+#define OB_WRP_DB_SECTOR_21 ((uint32_t)0x04000000U) /*!< Write protection of Dual Bank Sector21 */
+#define OB_WRP_DB_SECTOR_22 ((uint32_t)0x08000000U) /*!< Write protection of Dual Bank Sector22 */
+#define OB_WRP_DB_SECTOR_23 ((uint32_t)0x08000000U) /*!< Write protection of Dual Bank Sector23 */
+#define OB_WRP_DB_SECTOR_All ((uint32_t)0x0FFF0000U) /*!< Write protection of all Sectors for Dual Bank Flash */
+/**
+ * @}
+ */
+#endif /* FLASH_SECTOR_TOTAL == 24 */
+
+#if (FLASH_SECTOR_TOTAL == 8)
+/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
+ * @{
+ */
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00020000U) /*!< Write protection of Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00040000U) /*!< Write protection of Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00080000U) /*!< Write protection of Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00100000U) /*!< Write protection of Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00200000U) /*!< Write protection of Sector5 */
+#define OB_WRP_SECTOR_6 ((uint32_t)0x00400000U) /*!< Write protection of Sector6 */
+#define OB_WRP_SECTOR_7 ((uint32_t)0x00800000U) /*!< Write protection of Sector7 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x00FF0000U) /*!< Write protection of all Sectors */
+/**
+ * @}
+ */
+#endif /* FLASH_SECTOR_TOTAL == 8 */
+
+#if defined (FLASH_OPTCR2_PCROP)
+/** @defgroup FLASHEx_Option_Bytes_PCROP_Sectors FLASH Option Bytes PCROP Sectors
+ * @{
+ */
+#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001U) /*!< PC Readout protection of Sector0 */
+#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002U) /*!< PC Readout protection of Sector1 */
+#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004U) /*!< PC Readout protection of Sector2 */
+#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008U) /*!< PC Readout protection of Sector3 */
+#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010U) /*!< PC Readout protection of Sector4 */
+#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020U) /*!< PC Readout protection of Sector5 */
+#define OB_PCROP_SECTOR_6 ((uint32_t)0x00000040U) /*!< PC Readout protection of Sector6 */
+#define OB_PCROP_SECTOR_7 ((uint32_t)0x00000080U) /*!< PC Readout protection of Sector7 */
+#define OB_PCROP_SECTOR_All ((uint32_t)0x000000FFU) /*!< PC Readout protection of all Sectors */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_PCROP_RDP FLASH Option Bytes PCROP_RDP Bit
+ * @{
+ */
+#define OB_PCROP_RDP_ENABLE ((uint32_t)0x80000000U) /*!< PCROP_RDP Enable */
+#define OB_PCROP_RDP_DISABLE ((uint32_t)0x00000000U) /*!< PCROP_RDP Disable */
+/**
+ * @}
+ */
+#endif /* FLASH_OPTCR2_PCROP */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
+ * @{
+ */
+/**
+ * @brief Calculate the FLASH Boot Base Adress (BOOT_ADD0 or BOOT_ADD1)
+ * @note Returned value BOOT_ADDx[15:0] corresponds to boot address [29:14].
+ * @param __ADDRESS__ FLASH Boot Address (in the range 0x0000 0000 to 0x2004 FFFF with a granularity of 16KB)
+ * @retval The FLASH Boot Base Adress
+ */
+#define __HAL_FLASH_CALC_BOOT_BASE_ADR(__ADDRESS__) ((__ADDRESS__) >> 14)
+ /**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASHEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup FLASHEx_Exported_Functions_Group1
+ * @{
+ */
+/* Extension Program operation functions *************************************/
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError);
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Macros FLASH Private Macros
+ * @{
+ */
+
+/** @defgroup FLASHEx_IS_FLASH_Definitions FLASH Private macros to check input parameters
+ * @{
+ */
+
+#define IS_FLASH_TYPEERASE(VALUE)(((VALUE) == FLASH_TYPEERASE_SECTORS) || \
+ ((VALUE) == FLASH_TYPEERASE_MASSERASE))
+
+#define IS_VOLTAGERANGE(RANGE)(((RANGE) == FLASH_VOLTAGE_RANGE_1) || \
+ ((RANGE) == FLASH_VOLTAGE_RANGE_2) || \
+ ((RANGE) == FLASH_VOLTAGE_RANGE_3) || \
+ ((RANGE) == FLASH_VOLTAGE_RANGE_4))
+
+#define IS_WRPSTATE(VALUE)(((VALUE) == OB_WRPSTATE_DISABLE) || \
+ ((VALUE) == OB_WRPSTATE_ENABLE))
+
+#if defined (FLASH_OPTCR2_PCROP)
+#define IS_OPTIONBYTE(VALUE)(((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\
+ OPTIONBYTE_BOR | OPTIONBYTE_BOOTADDR_0 | OPTIONBYTE_BOOTADDR_1 |\
+ OPTIONBYTE_PCROP | OPTIONBYTE_PCROP_RDP)))
+#else
+#define IS_OPTIONBYTE(VALUE)(((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\
+ OPTIONBYTE_BOR | OPTIONBYTE_BOOTADDR_0 | OPTIONBYTE_BOOTADDR_1)))
+#endif /* FLASH_OPTCR2_PCROP */
+
+#define IS_OB_BOOT_ADDRESS(ADDRESS) ((ADDRESS) <= 0x8013)
+
+#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
+ ((LEVEL) == OB_RDP_LEVEL_1) ||\
+ ((LEVEL) == OB_RDP_LEVEL_2))
+
+#define IS_OB_WWDG_SOURCE(SOURCE) (((SOURCE) == OB_WWDG_SW) || ((SOURCE) == OB_WWDG_HW))
+
+#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
+
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
+
+#define IS_OB_IWDG_STOP_FREEZE(FREEZE) (((FREEZE) == OB_IWDG_STOP_FREEZE) || ((FREEZE) == OB_IWDG_STOP_ACTIVE))
+
+#define IS_OB_IWDG_STDBY_FREEZE(FREEZE) (((FREEZE) == OB_IWDG_STDBY_FREEZE) || ((FREEZE) == OB_IWDG_STDBY_ACTIVE))
+
+#define IS_OB_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\
+ ((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF))
+
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
+ ((LATENCY) == FLASH_LATENCY_1) || \
+ ((LATENCY) == FLASH_LATENCY_2) || \
+ ((LATENCY) == FLASH_LATENCY_3) || \
+ ((LATENCY) == FLASH_LATENCY_4) || \
+ ((LATENCY) == FLASH_LATENCY_5) || \
+ ((LATENCY) == FLASH_LATENCY_6) || \
+ ((LATENCY) == FLASH_LATENCY_7) || \
+ ((LATENCY) == FLASH_LATENCY_8) || \
+ ((LATENCY) == FLASH_LATENCY_9) || \
+ ((LATENCY) == FLASH_LATENCY_10) || \
+ ((LATENCY) == FLASH_LATENCY_11) || \
+ ((LATENCY) == FLASH_LATENCY_12) || \
+ ((LATENCY) == FLASH_LATENCY_13) || \
+ ((LATENCY) == FLASH_LATENCY_14) || \
+ ((LATENCY) == FLASH_LATENCY_15))
+
+#define IS_FLASH_ADDRESS(ADDRESS) ((((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= FLASH_END)) || \
+ (((ADDRESS) >= FLASH_OTP_BASE) && ((ADDRESS) <= FLASH_OTP_END)))
+#define IS_FLASH_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0U) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL))
+
+#if (FLASH_SECTOR_TOTAL == 8)
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
+ ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7))
+
+#define IS_OB_WRP_SECTOR(SECTOR) ((((SECTOR) & 0xFF00FFFFU) == 0x00000000U) && ((SECTOR) != 0x00000000U))
+#endif /* FLASH_SECTOR_TOTAL == 8 */
+
+#if (FLASH_SECTOR_TOTAL == 24)
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
+ ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7) ||\
+ ((SECTOR) == FLASH_SECTOR_8) || ((SECTOR) == FLASH_SECTOR_9) ||\
+ ((SECTOR) == FLASH_SECTOR_10) || ((SECTOR) == FLASH_SECTOR_11) ||\
+ ((SECTOR) == FLASH_SECTOR_12) || ((SECTOR) == FLASH_SECTOR_13) ||\
+ ((SECTOR) == FLASH_SECTOR_14) || ((SECTOR) == FLASH_SECTOR_15) ||\
+ ((SECTOR) == FLASH_SECTOR_16) || ((SECTOR) == FLASH_SECTOR_17) ||\
+ ((SECTOR) == FLASH_SECTOR_18) || ((SECTOR) == FLASH_SECTOR_19) ||\
+ ((SECTOR) == FLASH_SECTOR_20) || ((SECTOR) == FLASH_SECTOR_21) ||\
+ ((SECTOR) == FLASH_SECTOR_22) || ((SECTOR) == FLASH_SECTOR_23))
+
+#define IS_OB_WRP_SECTOR(SECTOR) ((((SECTOR) & 0xF000FFFFU) == 0x00000000U) && ((SECTOR) != 0x00000000U))
+#endif /* FLASH_SECTOR_TOTAL == 24 */
+
+#if defined (FLASH_OPTCR_nDBANK)
+#define IS_OB_NDBANK(VALUE) (((VALUE) == OB_NDBANK_SINGLE_BANK) || \
+ ((VALUE) == OB_NDBANK_DUAL_BANK))
+
+#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \
+ ((BANK) == FLASH_BANK_2) || \
+ ((BANK) == FLASH_BANK_BOTH))
+#endif /* FLASH_OPTCR_nDBANK */
+
+#if defined (FLASH_OPTCR_nDBOOT)
+#define IS_OB_NDBOOT(VALUE) (((VALUE) == OB_DUAL_BOOT_DISABLE) || \
+ ((VALUE) == OB_DUAL_BOOT_ENABLE))
+#endif /* FLASH_OPTCR_nDBOOT */
+
+#if defined (FLASH_OPTCR2_PCROP)
+#define IS_OB_PCROP_SECTOR(SECTOR) (((SECTOR) & (uint32_t)0xFFFFFF00U) == 0x00000000U)
+#define IS_OB_PCROP_RDP_VALUE(VALUE) (((VALUE) == OB_PCROP_RDP_DISABLE) || \
+ ((VALUE) == OB_PCROP_RDP_ENABLE))
+#endif /* FLASH_OPTCR2_PCROP */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Functions FLASH Private Functions
+ * @{
+ */
+void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_FLASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h
new file mode 100644
index 00000000..bb7954f6
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h
@@ -0,0 +1,325 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_gpio.h
+ * @author MCD Application Team
+ * @brief Header file of GPIO HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_GPIO_H
+#define __STM32F7xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+ * @{
+ */
+
+/**
+ * @brief GPIO Init structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_pins_define */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_mode_define */
+
+ uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+ This parameter can be a value of @ref GPIO_pull_define */
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_speed_define */
+
+ uint32_t Alternate; /*!< Peripheral to be connected to the selected pins.
+ This parameter can be a value of @ref GPIO_Alternate_function_selection */
+}GPIO_InitTypeDef;
+
+/**
+ * @brief GPIO Bit SET and Bit RESET enumeration
+ */
+typedef enum
+{
+ GPIO_PIN_RESET = 0,
+ GPIO_PIN_SET
+}GPIO_PinState;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIO_pins_define GPIO pins define
+ * @{
+ */
+#define GPIO_PIN_0 ((uint16_t)0x0001U) /* Pin 0 selected */
+#define GPIO_PIN_1 ((uint16_t)0x0002U) /* Pin 1 selected */
+#define GPIO_PIN_2 ((uint16_t)0x0004U) /* Pin 2 selected */
+#define GPIO_PIN_3 ((uint16_t)0x0008U) /* Pin 3 selected */
+#define GPIO_PIN_4 ((uint16_t)0x0010U) /* Pin 4 selected */
+#define GPIO_PIN_5 ((uint16_t)0x0020U) /* Pin 5 selected */
+#define GPIO_PIN_6 ((uint16_t)0x0040U) /* Pin 6 selected */
+#define GPIO_PIN_7 ((uint16_t)0x0080U) /* Pin 7 selected */
+#define GPIO_PIN_8 ((uint16_t)0x0100U) /* Pin 8 selected */
+#define GPIO_PIN_9 ((uint16_t)0x0200U) /* Pin 9 selected */
+#define GPIO_PIN_10 ((uint16_t)0x0400U) /* Pin 10 selected */
+#define GPIO_PIN_11 ((uint16_t)0x0800U) /* Pin 11 selected */
+#define GPIO_PIN_12 ((uint16_t)0x1000U) /* Pin 12 selected */
+#define GPIO_PIN_13 ((uint16_t)0x2000U) /* Pin 13 selected */
+#define GPIO_PIN_14 ((uint16_t)0x4000U) /* Pin 14 selected */
+#define GPIO_PIN_15 ((uint16_t)0x8000U) /* Pin 15 selected */
+#define GPIO_PIN_All ((uint16_t)0xFFFFU) /* All pins selected */
+
+#define GPIO_PIN_MASK ((uint32_t)0x0000FFFFU) /* PIN mask for assert test */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_mode_define GPIO mode define
+ * @brief GPIO Configuration Mode
+ * Elements values convention: 0xX0yz00YZ
+ * - X : GPIO mode or EXTI Mode
+ * - y : External IT or Event trigger detection
+ * - z : IO configuration on External IT or Event
+ * - Y : Output type (Push Pull or Open Drain)
+ * - Z : IO Direction mode (Input, Output, Alternate or Analog)
+ * @{
+ */
+#define GPIO_MODE_INPUT ((uint32_t)0x00000000U) /*!< Input Floating Mode */
+#define GPIO_MODE_OUTPUT_PP ((uint32_t)0x00000001U) /*!< Output Push Pull Mode */
+#define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011U) /*!< Output Open Drain Mode */
+#define GPIO_MODE_AF_PP ((uint32_t)0x00000002U) /*!< Alternate Function Push Pull Mode */
+#define GPIO_MODE_AF_OD ((uint32_t)0x00000012U) /*!< Alternate Function Open Drain Mode */
+
+#define GPIO_MODE_ANALOG ((uint32_t)0x00000003U) /*!< Analog Mode */
+
+#define GPIO_MODE_IT_RISING ((uint32_t)0x10110000U) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000U) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+
+#define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000U) /*!< External Event Mode with Rising edge trigger detection */
+#define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000U) /*!< External Event Mode with Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000U) /*!< External Event Mode with Rising/Falling edge trigger detection */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_speed_define GPIO speed define
+ * @brief GPIO Output Maximum frequency
+ * @{
+ */
+#define GPIO_SPEED_FREQ_LOW ((uint32_t)0x00000000U) /*!< Low speed */
+#define GPIO_SPEED_FREQ_MEDIUM ((uint32_t)0x00000001U) /*!< Medium speed */
+#define GPIO_SPEED_FREQ_HIGH ((uint32_t)0x00000002U) /*!< Fast speed */
+#define GPIO_SPEED_FREQ_VERY_HIGH ((uint32_t)0x00000003U) /*!< High speed */
+/**
+ * @}
+ */
+
+ /** @defgroup GPIO_pull_define GPIO pull define
+ * @brief GPIO Pull-Up or Pull-Down Activation
+ * @{
+ */
+#define GPIO_NOPULL ((uint32_t)0x00000000U) /*!< No Pull-up or Pull-down activation */
+#define GPIO_PULLUP ((uint32_t)0x00000001U) /*!< Pull-up activation */
+#define GPIO_PULLDOWN ((uint32_t)0x00000002U) /*!< Pull-down activation */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param __EXTI_LINE__ specifies the EXTI line flag to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending flags.
+ * @param __EXTI_LINE__ specifies the EXTI lines flags to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Checks whether the specified EXTI line is asserted or not.
+ * @param __EXTI_LINE__ specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending bits.
+ * @param __EXTI_LINE__ specifies the EXTI lines to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTI_LINE__ specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+/**
+ * @}
+ */
+
+/* Include GPIO HAL Extension module */
+#include "stm32f7xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
+/**
+ * @}
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Constants GPIO Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIO_Private_Macros GPIO Private Macros
+ * @{
+ */
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+#define IS_GPIO_PIN(__PIN__) ((((__PIN__) & GPIO_PIN_MASK) != (uint32_t)0x00))
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_PP) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_OD) ||\
+ ((MODE) == GPIO_MODE_AF_PP) ||\
+ ((MODE) == GPIO_MODE_AF_OD) ||\
+ ((MODE) == GPIO_MODE_IT_RISING) ||\
+ ((MODE) == GPIO_MODE_IT_FALLING) ||\
+ ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING) ||\
+ ((MODE) == GPIO_MODE_EVT_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_ANALOG))
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW) || ((SPEED) == GPIO_SPEED_MEDIUM) || \
+ ((SPEED) == GPIO_SPEED_FAST) || ((SPEED) == GPIO_SPEED_HIGH))
+#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
+ ((PULL) == GPIO_PULLDOWN))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Functions GPIO Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h
new file mode 100644
index 00000000..e1f6e21f
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h
@@ -0,0 +1,673 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_gpio_ex.h
+ * @author MCD Application Team
+ * @brief Header file of GPIO HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_GPIO_EX_H
+#define __STM32F7xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup GPIOEx GPIOEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection
+ * @{
+ */
+/*--------------- STM32F74xxx/STM32F75xxx/STM32F76xxx/STM32F77xxx -------------*/
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || defined (STM32F767xx) ||\
+ defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF1_UART5 ((uint8_t)0x01U) /* UART5 Alternate Function mapping */
+#define GPIO_AF1_I2C4 ((uint8_t)0x01U) /* I2C4 Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+#define GPIO_AF3_LPTIM1 ((uint8_t)0x03U) /* LPTIM1 Alternate Function mapping */
+#define GPIO_AF3_CEC ((uint8_t)0x03U) /* CEC Alternate Function mapping */
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF3_DFSDM1 ((uint8_t)0x03U) /* DFSDM1 Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF4_I2C4 ((uint8_t)0x04U) /* I2C4 Alternate Function mapping */
+#define GPIO_AF4_CEC ((uint8_t)0x04U) /* CEC Alternate Function mapping */
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF4_USART1 ((uint8_t)0x04) /* USART1 Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_SPI5 ((uint8_t)0x05U) /* SPI5 Alternate Function mapping */
+#define GPIO_AF5_SPI6 ((uint8_t)0x05U) /* SPI6 Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_SAI1 ((uint8_t)0x06U) /* SAI1 Alternate Function mapping */
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF6_UART4 ((uint8_t)0x06U) /* UART4 Alternate Function mapping */
+#define GPIO_AF6_DFSDM1 ((uint8_t)0x06U) /* DFSDM1 Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_UART5 ((uint8_t)0x07U) /* UART5 Alternate Function mapping */
+#define GPIO_AF7_SPDIFRX ((uint8_t)0x07U) /* SPDIF-RX Alternate Function mapping */
+#define GPIO_AF7_SPI2 ((uint8_t)0x07U) /* SPI2 Alternate Function mapping */
+#define GPIO_AF7_SPI3 ((uint8_t)0x07U) /* SPI3 Alternate Function mapping */
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF7_SPI6 ((uint8_t)0x07U) /* SPI6 Alternate Function mapping */
+#define GPIO_AF7_DFSDM1 ((uint8_t)0x07U) /* DFSDM1 Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_UART7 ((uint8_t)0x08U) /* UART7 Alternate Function mapping */
+#define GPIO_AF8_UART8 ((uint8_t)0x08U) /* UART8 Alternate Function mapping */
+#define GPIO_AF8_SPDIFRX ((uint8_t)0x08U) /* SPIDIF-RX Alternate Function mapping */
+#define GPIO_AF8_SAI2 ((uint8_t)0x08U) /* SAI2 Alternate Function mapping */
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF8_SPI6 ((uint8_t)0x08U) /* SPI6 Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09U) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_QUADSPI ((uint8_t)0x09U) /* QUADSPI Alternate Function mapping */
+#if defined(STM32F746xx) || defined(STM32F756xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF9_LTDC ((uint8_t)0x09U) /* LCD-TFT Alternate Function mapping */
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined(STM32F746xx) || defined(STM32F756xx) || defined(STM32F765xx) || defined(STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF9_FMC ((uint8_t)0x09U) /* FMC Alternate Function mapping */
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xAU) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0xAU) /* OTG_HS Alternate Function mapping */
+#define GPIO_AF10_QUADSPI ((uint8_t)0xAU) /* QUADSPI Alternate Function mapping */
+#define GPIO_AF10_SAI2 ((uint8_t)0xAU) /* SAI2 Alternate Function mapping */
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF10_DFSDM1 ((uint8_t)0x0AU) /* DFSDM1 Alternate Function mapping */
+#define GPIO_AF10_SDMMC2 ((uint8_t)0x0AU) /* SDMMC2 Alternate Function mapping */
+#define GPIO_AF10_LTDC ((uint8_t)0x0AU) /* LCD-TFT Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0BU) /* ETHERNET Alternate Function mapping */
+#if defined(STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define GPIO_AF11_CAN3 ((uint8_t)0x0BU) /* CAN3 Alternate Function mapping */
+#define GPIO_AF11_SDMMC2 ((uint8_t)0x0BU) /* SDMMC2 Alternate Function mapping */
+#define GPIO_AF11_I2C4 ((uint8_t)0x0BU) /* I2C4 Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FMC ((uint8_t)0xCU) /* FMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xCU) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDMMC1 ((uint8_t)0xCU) /* SDMMC1 Alternate Function mapping */
+#if defined(STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define GPIO_AF12_MDIOS ((uint8_t)0xCU) /* SDMMC1 Alternate Function mapping */
+#define GPIO_AF12_UART7 ((uint8_t)0xCU) /* UART7 Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0DU) /* DCMI Alternate Function mapping */
+#if defined (STM32F769xx) || defined (STM32F779xx)
+#define GPIO_AF13_DSI ((uint8_t)0x0DU) /* DSI Alternate Function mapping */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined(STM32F746xx) || defined(STM32F756xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define GPIO_AF13_LTDC ((uint8_t)0x0DU) /* LTDC Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+#define GPIO_AF14_LTDC ((uint8_t)0x0EU) /* LCD-TFT Alternate Function mapping */
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/*----------------------------------------------------------------------------*/
+
+/*---------------------------- STM32F72xxx/STM32F73xxx -----------------------*/
+#if defined(STM32F722xx) || defined(STM32F723xx) || defined(STM32F732xx) || defined(STM32F733xx)
+ /**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
+#define GPIO_AF3_LPTIM1 ((uint8_t)0x03U) /* LPTIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_SPI5 ((uint8_t)0x05U) /* SPI5 Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_SAI1 ((uint8_t)0x06U) /* SAI1 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_UART5 ((uint8_t)0x07U) /* UART5 Alternate Function mapping */
+#define GPIO_AF7_SPI2 ((uint8_t)0x07U) /* SPI2 Alternate Function mapping */
+#define GPIO_AF7_SPI3 ((uint8_t)0x07U) /* SPI3 Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_UART7 ((uint8_t)0x08U) /* UART7 Alternate Function mapping */
+#define GPIO_AF8_UART8 ((uint8_t)0x08U) /* UART8 Alternate Function mapping */
+#define GPIO_AF8_SAI2 ((uint8_t)0x08U) /* SAI2 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_QUADSPI ((uint8_t)0x09U) /* QUADSPI Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xAU) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0xAU) /* OTG_HS Alternate Function mapping */
+#define GPIO_AF10_QUADSPI ((uint8_t)0xAU) /* QUADSPI Alternate Function mapping */
+#define GPIO_AF10_SAI2 ((uint8_t)0xAU) /* SAI2 Alternate Function mapping */
+#define GPIO_AF10_SDMMC2 ((uint8_t)0x0AU) /* SDMMC2 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_SDMMC2 ((uint8_t)0x0BU) /* SDMMC2 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FMC ((uint8_t)0xCU) /* FMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xCU) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDMMC1 ((uint8_t)0xCU) /* SDMMC1 Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_RNG ((uint8_t)0x0DU) /* RNG Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx */
+/*----------------------------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Constants GPIO Private Constants
+ * @{
+ */
+
+/**
+ * @brief GPIO pin available on the platform
+ */
+/* Defines the available pins per GPIOs */
+#define GPIOA_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOB_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOC_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOD_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOE_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOF_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOG_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOI_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOJ_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOH_PIN_AVAILABLE GPIO_PIN_All
+#define GPIOK_PIN_AVAILABLE (GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | \
+ GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7)
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Macros GPIO Private Macros
+ * @{
+ */
+/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index
+ * @{
+ */
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U :\
+ ((__GPIOx__) == (GPIOF))? 5U :\
+ ((__GPIOx__) == (GPIOG))? 6U :\
+ ((__GPIOx__) == (GPIOH))? 7U :\
+ ((__GPIOx__) == (GPIOI))? 8U :\
+ ((__GPIOx__) == (GPIOJ))? 9U : 10U)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx)
+#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U :\
+ ((__GPIOx__) == (GPIOF))? 5U :\
+ ((__GPIOx__) == (GPIOG))? 6U :\
+ ((__GPIOx__) == (GPIOH))? 7U : 8U)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx */
+/**
+ * @}
+ */
+
+#define IS_GPIO_PIN_AVAILABLE(__INSTANCE__,__PIN__) \
+ ((((__INSTANCE__) == GPIOA) && (((__PIN__) & (GPIOA_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOA_PIN_AVAILABLE)) == (GPIOA_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOB) && (((__PIN__) & (GPIOB_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOB_PIN_AVAILABLE)) == (GPIOB_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOC) && (((__PIN__) & (GPIOC_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOC_PIN_AVAILABLE)) == (GPIOC_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOD) && (((__PIN__) & (GPIOD_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOD_PIN_AVAILABLE)) == (GPIOD_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOE) && (((__PIN__) & (GPIOE_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOE_PIN_AVAILABLE)) == (GPIOE_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOF) && (((__PIN__) & (GPIOF_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOF_PIN_AVAILABLE)) == (GPIOF_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOG) && (((__PIN__) & (GPIOG_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOG_PIN_AVAILABLE)) == (GPIOG_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOI) && (((__PIN__) & (GPIOI_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOI_PIN_AVAILABLE)) == (GPIOI_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOJ) && (((__PIN__) & (GPIOJ_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOJ_PIN_AVAILABLE)) == (GPIOJ_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOK) && (((__PIN__) & (GPIOK_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOK_PIN_AVAILABLE)) == (GPIOK_PIN_AVAILABLE))) || \
+ (((__INSTANCE__) == GPIOH) && (((__PIN__) & (GPIOH_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOH_PIN_AVAILABLE)) == (GPIOH_PIN_AVAILABLE))))
+/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function
+ * @{
+ */
+#if defined(STM32F756xx) || defined(STM32F746xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
+ ((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
+ ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
+ ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
+ ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
+ ((AF) == GPIO_AF9_LTDC) || ((AF) == GPIO_AF10_OTG_FS) || \
+ ((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
+ ((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
+ ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDMMC1) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF15_EVENTOUT) || \
+ ((AF) == GPIO_AF13_DCMI) || ((AF) == GPIO_AF14_LTDC))
+#elif defined(STM32F745xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
+ ((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
+ ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
+ ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
+ ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
+ ((AF) == GPIO_AF13_DCMI) || ((AF) == GPIO_AF10_OTG_FS) || \
+ ((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
+ ((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
+ ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDMMC1) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF15_EVENTOUT))
+#elif defined(STM32F767xx) || defined(STM32F777xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
+ ((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
+ ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
+ ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
+ ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF9_LTDC) || \
+ ((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
+ ((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
+ ((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \
+ ((AF) == GPIO_AF11_CAN3) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDMMC1) || ((AF) == GPIO_AF12_FMC) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF14_LTDC))
+#elif defined(STM32F769xx) || defined(STM32F779xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
+ ((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
+ ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
+ ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
+ ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
+ ((AF) == GPIO_AF9_LTDC) || ((AF) == GPIO_AF10_OTG_FS) || \
+ ((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
+ ((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
+ ((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \
+ ((AF) == GPIO_AF11_CAN3) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDMMC1) || ((AF) == GPIO_AF12_FMC) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF14_LTDC) || ((AF) == GPIO_AF13_DSI))
+#elif defined(STM32F765xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
+ ((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
+ ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
+ ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
+ ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
+ ((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
+ ((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
+ ((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \
+ ((AF) == GPIO_AF11_CAN3) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDMMC1) || ((AF) == GPIO_AF12_FMC) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF10_OTG_FS))
+#elif defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
+ ((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF5_SPI3) || \
+ ((AF) == GPIO_AF5_SPI4) || ((AF) == GPIO_AF5_SPI5) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
+ ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF9_QUADSPI) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF10_SAI2) || ((AF) == GPIO_AF10_QUADSPI) || \
+ ((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \
+ ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDMMC1) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF15_EVENTOUT) || \
+ ((AF) == GPIO_AF10_OTG_FS))
+#endif /* STM32F756xx || STM32F746xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Functions GPIO Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_GPIO_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h
new file mode 100644
index 00000000..80b7a23f
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h
@@ -0,0 +1,710 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_i2c.h
+ * @author MCD Application Team
+ * @brief Header file of I2C HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_I2C_H
+#define __STM32F7xx_HAL_I2C_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2C
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2C_Exported_Types I2C Exported Types
+ * @{
+ */
+
+/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
+ * @brief I2C Configuration Structure definition
+ * @{
+ */
+typedef struct
+{
+ uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value.
+ This parameter calculated by referring to I2C initialization
+ section in Reference manual */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+ This parameter can be a value of @ref I2C_ADDRESSING_MODE */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected
+ This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref I2C_NOSTRETCH_MODE */
+
+} I2C_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_state_structure_definition HAL state structure definition
+ * @brief HAL State structure definition
+ * @note HAL I2C State value coding follow below described bitmap :\n
+ * b7-b6 Error information\n
+ * 00 : No Error\n
+ * 01 : Abort (Abort user request on going)\n
+ * 10 : Timeout\n
+ * 11 : Error\n
+ * b5 IP initilisation status\n
+ * 0 : Reset (IP not initialized)\n
+ * 1 : Init done (IP initialized and ready to use. HAL I2C Init function called)\n
+ * b4 (not used)\n
+ * x : Should be set to 0\n
+ * b3\n
+ * 0 : Ready or Busy (No Listen mode ongoing)\n
+ * 1 : Listen (IP in Address Listen Mode)\n
+ * b2 Intrinsic process state\n
+ * 0 : Ready\n
+ * 1 : Busy (IP busy with some configuration or internal operations)\n
+ * b1 Rx state\n
+ * 0 : Ready (no Rx operation ongoing)\n
+ * 1 : Busy (Rx operation ongoing)\n
+ * b0 Tx state\n
+ * 0 : Ready (no Tx operation ongoing)\n
+ * 1 : Busy (Tx operation ongoing)
+ * @{
+ */
+typedef enum
+{
+ HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
+ HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
+ HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
+ HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
+ HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
+ HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
+ HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
+ process is ongoing */
+ HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
+ process is ongoing */
+ HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
+ HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
+ HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */
+
+} HAL_I2C_StateTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_mode_structure_definition HAL mode structure definition
+ * @brief HAL Mode structure definition
+ * @note HAL I2C Mode value coding follow below described bitmap :\n
+ * b7 (not used)\n
+ * x : Should be set to 0\n
+ * b6\n
+ * 0 : None\n
+ * 1 : Memory (HAL I2C communication is in Memory Mode)\n
+ * b5\n
+ * 0 : None\n
+ * 1 : Slave (HAL I2C communication is in Slave Mode)\n
+ * b4\n
+ * 0 : None\n
+ * 1 : Master (HAL I2C communication is in Master Mode)\n
+ * b3-b2-b1-b0 (not used)\n
+ * xxxx : Should be set to 0000
+ * @{
+ */
+typedef enum
+{
+ HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */
+ HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */
+ HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */
+ HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */
+
+} HAL_I2C_ModeTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Error_Code_definition I2C Error Code definition
+ * @brief I2C Error Code definition
+ * @{
+ */
+#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */
+#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */
+#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */
+#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */
+#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */
+#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
+#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */
+#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */
+/**
+ * @}
+ */
+
+/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
+ * @brief I2C handle Structure definition
+ * @{
+ */
+typedef struct __I2C_HandleTypeDef
+{
+ I2C_TypeDef *Instance; /*!< I2C registers base address */
+
+ I2C_InitTypeDef Init; /*!< I2C communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
+
+ uint16_t XferSize; /*!< I2C transfer size */
+
+ __IO uint16_t XferCount; /*!< I2C transfer counter */
+
+ __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can
+ be a value of @ref I2C_XFEROPTIONS */
+
+ __IO uint32_t PreviousState; /*!< I2C communication Previous state */
+
+ HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); /*!< I2C transfer IRQ handler function pointer */
+
+ DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< I2C locking object */
+
+ __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
+
+ __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */
+
+ __IO uint32_t ErrorCode; /*!< I2C Error code */
+
+ __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */
+} I2C_HandleTypeDef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Constants I2C Exported Constants
+ * @{
+ */
+
+/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options
+ * @{
+ */
+#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE)
+#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
+#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
+#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
+#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
+#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode
+ * @{
+ */
+#define I2C_ADDRESSINGMODE_7BIT (0x00000001U)
+#define I2C_ADDRESSINGMODE_10BIT (0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode
+ * @{
+ */
+#define I2C_DUALADDRESS_DISABLE (0x00000000U)
+#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN
+/**
+ * @}
+ */
+
+/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks
+ * @{
+ */
+#define I2C_OA2_NOMASK ((uint8_t)0x00U)
+#define I2C_OA2_MASK01 ((uint8_t)0x01U)
+#define I2C_OA2_MASK02 ((uint8_t)0x02U)
+#define I2C_OA2_MASK03 ((uint8_t)0x03U)
+#define I2C_OA2_MASK04 ((uint8_t)0x04U)
+#define I2C_OA2_MASK05 ((uint8_t)0x05U)
+#define I2C_OA2_MASK06 ((uint8_t)0x06U)
+#define I2C_OA2_MASK07 ((uint8_t)0x07U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode
+ * @{
+ */
+#define I2C_GENERALCALL_DISABLE (0x00000000U)
+#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN
+/**
+ * @}
+ */
+
+/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode
+ * @{
+ */
+#define I2C_NOSTRETCH_DISABLE (0x00000000U)
+#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
+/**
+ * @}
+ */
+
+/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size
+ * @{
+ */
+#define I2C_MEMADD_SIZE_8BIT (0x00000001U)
+#define I2C_MEMADD_SIZE_16BIT (0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View
+ * @{
+ */
+#define I2C_DIRECTION_TRANSMIT (0x00000000U)
+#define I2C_DIRECTION_RECEIVE (0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode
+ * @{
+ */
+#define I2C_RELOAD_MODE I2C_CR2_RELOAD
+#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND
+#define I2C_SOFTEND_MODE (0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode
+ * @{
+ */
+#define I2C_NO_STARTSTOP (0x00000000U)
+#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP)
+#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)
+#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
+ * @brief I2C Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define I2C_IT_ERRI I2C_CR1_ERRIE
+#define I2C_IT_TCI I2C_CR1_TCIE
+#define I2C_IT_STOPI I2C_CR1_STOPIE
+#define I2C_IT_NACKI I2C_CR1_NACKIE
+#define I2C_IT_ADDRI I2C_CR1_ADDRIE
+#define I2C_IT_RXI I2C_CR1_RXIE
+#define I2C_IT_TXI I2C_CR1_TXIE
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Flag_definition I2C Flag definition
+ * @{
+ */
+#define I2C_FLAG_TXE I2C_ISR_TXE
+#define I2C_FLAG_TXIS I2C_ISR_TXIS
+#define I2C_FLAG_RXNE I2C_ISR_RXNE
+#define I2C_FLAG_ADDR I2C_ISR_ADDR
+#define I2C_FLAG_AF I2C_ISR_NACKF
+#define I2C_FLAG_STOPF I2C_ISR_STOPF
+#define I2C_FLAG_TC I2C_ISR_TC
+#define I2C_FLAG_TCR I2C_ISR_TCR
+#define I2C_FLAG_BERR I2C_ISR_BERR
+#define I2C_FLAG_ARLO I2C_ISR_ARLO
+#define I2C_FLAG_OVR I2C_ISR_OVR
+#define I2C_FLAG_PECERR I2C_ISR_PECERR
+#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT
+#define I2C_FLAG_ALERT I2C_ISR_ALERT
+#define I2C_FLAG_BUSY I2C_ISR_BUSY
+#define I2C_FLAG_DIR I2C_ISR_DIR
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Macros I2C Exported Macros
+ * @{
+ */
+
+/** @brief Reset I2C handle state.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+
+/** @brief Enable the specified I2C interrupt.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_IT_ERRI Errors interrupt enable
+ * @arg @ref I2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref I2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref I2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref I2C_IT_RXI RX interrupt enable
+ * @arg @ref I2C_IT_TXI TX interrupt enable
+ *
+ * @retval None
+ */
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+
+/** @brief Disable the specified I2C interrupt.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_IT_ERRI Errors interrupt enable
+ * @arg @ref I2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref I2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref I2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref I2C_IT_RXI RX interrupt enable
+ * @arg @ref I2C_IT_TXI TX interrupt enable
+ *
+ * @retval None
+ */
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief Check whether the specified I2C interrupt source is enabled or not.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __INTERRUPT__ specifies the I2C interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_IT_ERRI Errors interrupt enable
+ * @arg @ref I2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref I2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref I2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref I2C_IT_RXI RX interrupt enable
+ * @arg @ref I2C_IT_TXI TX interrupt enable
+ *
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified I2C flag is set or not.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_FLAG_TXE Transmit data register empty
+ * @arg @ref I2C_FLAG_TXIS Transmit interrupt status
+ * @arg @ref I2C_FLAG_RXNE Receive data register not empty
+ * @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
+ * @arg @ref I2C_FLAG_AF Acknowledge failure received flag
+ * @arg @ref I2C_FLAG_STOPF STOP detection flag
+ * @arg @ref I2C_FLAG_TC Transfer complete (master mode)
+ * @arg @ref I2C_FLAG_TCR Transfer complete reload
+ * @arg @ref I2C_FLAG_BERR Bus error
+ * @arg @ref I2C_FLAG_ARLO Arbitration lost
+ * @arg @ref I2C_FLAG_OVR Overrun/Underrun
+ * @arg @ref I2C_FLAG_PECERR PEC error in reception
+ * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
+ * @arg @ref I2C_FLAG_ALERT SMBus alert
+ * @arg @ref I2C_FLAG_BUSY Bus busy
+ * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode)
+ *
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) ? SET : RESET)
+
+/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg @ref I2C_FLAG_TXE Transmit data register empty
+ * @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
+ * @arg @ref I2C_FLAG_AF Acknowledge failure received flag
+ * @arg @ref I2C_FLAG_STOPF STOP detection flag
+ * @arg @ref I2C_FLAG_BERR Bus error
+ * @arg @ref I2C_FLAG_ARLO Arbitration lost
+ * @arg @ref I2C_FLAG_OVR Overrun/Underrun
+ * @arg @ref I2C_FLAG_PECERR PEC error in reception
+ * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
+ * @arg @ref I2C_FLAG_ALERT SMBus alert
+ *
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \
+ : ((__HANDLE__)->Instance->ICR = (__FLAG__)))
+
+/** @brief Enable the specified I2C peripheral.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
+
+/** @brief Disable the specified I2C peripheral.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
+
+/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
+/**
+ * @}
+ */
+
+/* Include I2C HAL Extended module */
+#include "stm32f7xx_hal_i2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2C_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions******************************/
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* IO operation functions ****************************************************/
+/******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+/******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
+
+/******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
+/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
+void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
+ * @{
+ */
+/* Peripheral State, Mode and Error functions *********************************/
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
+HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Constants I2C Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2C_Private_Macro I2C Private Macros
+ * @{
+ */
+
+#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \
+ ((MODE) == I2C_ADDRESSINGMODE_10BIT))
+
+#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
+ ((ADDRESS) == I2C_DUALADDRESS_ENABLE))
+
+#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \
+ ((MASK) == I2C_OA2_MASK01) || \
+ ((MASK) == I2C_OA2_MASK02) || \
+ ((MASK) == I2C_OA2_MASK03) || \
+ ((MASK) == I2C_OA2_MASK04) || \
+ ((MASK) == I2C_OA2_MASK05) || \
+ ((MASK) == I2C_OA2_MASK06) || \
+ ((MASK) == I2C_OA2_MASK07))
+
+#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
+ ((CALL) == I2C_GENERALCALL_ENABLE))
+
+#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
+ ((STRETCH) == I2C_NOSTRETCH_ENABLE))
+
+#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
+ ((SIZE) == I2C_MEMADD_SIZE_16BIT))
+
+#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \
+ ((MODE) == I2C_AUTOEND_MODE) || \
+ ((MODE) == I2C_SOFTEND_MODE))
+
+#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \
+ ((REQUEST) == I2C_GENERATE_START_READ) || \
+ ((REQUEST) == I2C_GENERATE_START_WRITE) || \
+ ((REQUEST) == I2C_NO_STARTSTOP))
+
+#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \
+ ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \
+ ((REQUEST) == I2C_NEXT_FRAME) || \
+ ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \
+ ((REQUEST) == I2C_LAST_FRAME) || \
+ ((REQUEST) == I2C_LAST_FRAME_NO_STOP))
+
+#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+
+#define I2C_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U)
+#define I2C_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U)
+#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
+#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)
+#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)
+
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU)
+#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU)
+
+#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U)))
+#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
+
+#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+/**
+ * @}
+ */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Functions I2C Private Functions
+ * @{
+ */
+/* Private functions are defined in stm32f7xx_hal_i2c.c file */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h
new file mode 100644
index 00000000..46d6bcbd
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h
@@ -0,0 +1,221 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_i2c_ex.h
+ * @author MCD Application Team
+ * @brief Header file of I2C HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_I2C_EX_H
+#define __STM32F7xx_HAL_I2C_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2CEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter
+ * @{
+ */
+#define I2C_ANALOGFILTER_ENABLE 0x00000000U
+#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF
+/**
+ * @}
+ */
+
+/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus
+ * @{
+ */
+#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */
+#if defined(SYSCFG_PMC_I2C_PB6_FMP)
+#define I2C_FASTMODEPLUS_PB6 SYSCFG_PMC_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */
+#define I2C_FASTMODEPLUS_PB7 SYSCFG_PMC_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */
+#else
+#define I2C_FASTMODEPLUS_PB6 (uint32_t)(0x00000004U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB6 not supported */
+#define I2C_FASTMODEPLUS_PB7 (uint32_t)(0x00000008U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB7 not supported */
+#endif
+#if defined(SYSCFG_PMC_I2C_PB8_FMP)
+#define I2C_FASTMODEPLUS_PB8 SYSCFG_PMC_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */
+#define I2C_FASTMODEPLUS_PB9 SYSCFG_PMC_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */
+#else
+#define I2C_FASTMODEPLUS_PB8 (uint32_t)(0x00000010U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB8 not supported */
+#define I2C_FASTMODEPLUS_PB9 (uint32_t)(0x00000012U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB9 not supported */
+#endif
+#if defined(SYSCFG_PMC_I2C1_FMP)
+#define I2C_FASTMODEPLUS_I2C1 SYSCFG_PMC_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */
+#else
+#define I2C_FASTMODEPLUS_I2C1 (uint32_t)(0x00000100U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C1 not supported */
+#endif
+#if defined(SYSCFG_PMC_I2C2_FMP)
+#define I2C_FASTMODEPLUS_I2C2 SYSCFG_PMC_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */
+#else
+#define I2C_FASTMODEPLUS_I2C2 (uint32_t)(0x00000200U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C2 not supported */
+#endif
+#if defined(SYSCFG_PMC_I2C3_FMP)
+#define I2C_FASTMODEPLUS_I2C3 SYSCFG_PMC_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */
+#else
+#define I2C_FASTMODEPLUS_I2C3 (uint32_t)(0x00000400U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C3 not supported */
+#endif
+#if defined(SYSCFG_PMC_I2C4_FMP)
+#define I2C_FASTMODEPLUS_I2C4 SYSCFG_PMC_I2C4_FMP /*!< Enable Fast Mode Plus on I2C4 pins */
+#else
+#define I2C_FASTMODEPLUS_I2C4 (uint32_t)(0x00000800U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C4 not supported */
+#endif
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup I2CEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ * @{
+ */
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
+#if (defined(SYSCFG_PMC_I2C_PB6_FMP) || defined(SYSCFG_PMC_I2C_PB7_FMP)) || (defined(SYSCFG_PMC_I2C_PB8_FMP) || defined(SYSCFG_PMC_I2C_PB9_FMP)) || (defined(SYSCFG_PMC_I2C1_FMP)) || (defined(SYSCFG_PMC_I2C2_FMP)) || defined(SYSCFG_PMC_I2C3_FMP) || defined(SYSCFG_PMC_I2C4_FMP)
+void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
+void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
+#endif
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros
+ * @{
+ */
+#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \
+ ((FILTER) == I2C_ANALOGFILTER_DISABLE))
+
+#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU)
+
+#if defined(SYSCFG_PMC_I2C1_FMP) && defined(SYSCFG_PMC_I2C2_FMP) && defined(SYSCFG_PMC_I2C3_FMP) && defined(SYSCFG_PMC_I2C4_FMP)
+#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C3) == I2C_FASTMODEPLUS_I2C3) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C4) == I2C_FASTMODEPLUS_I2C4))
+#elif defined(SYSCFG_PMC_I2C1_FMP) && defined(SYSCFG_PMC_I2C2_FMP) && defined(SYSCFG_PMC_I2C3_FMP)
+#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C3) == I2C_FASTMODEPLUS_I2C3))
+#elif defined(SYSCFG_PMC_I2C1_FMP) && defined(SYSCFG_PMC_I2C2_FMP)
+#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2))
+#elif defined(SYSCFG_PMC_I2C1_FMP)
+#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
+ (((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1))
+#endif /* SYSCFG_PMC_I2C1_FMP && SYSCFG_PMC_I2C2_FMP && SYSCFG_PMC_I2C3_FMP && SYSCFG_PMC_I2C4_FMP */
+/**
+ * @}
+ */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions
+ * @{
+ */
+/* Private functions are defined in stm32f7xx_hal_i2c_ex.c file */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_I2C_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h
new file mode 100644
index 00000000..b0e193e4
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h
@@ -0,0 +1,420 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_pwr.h
+ * @author MCD Application Team
+ * @brief Header file of PWR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_PWR_H
+#define __STM32F7xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWR
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Types PWR Exported Types
+ * @{
+ */
+
+/**
+ * @brief PWR PVD configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
+ This parameter can be a value of @ref PWR_PVD_detection_level */
+
+ uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref PWR_PVD_Mode */
+}PWR_PVDTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+ * @{
+ */
+
+/** @defgroup PWR_PVD_detection_level PWR PVD detection level
+ * @{
+ */
+#define PWR_PVDLEVEL_0 PWR_CR1_PLS_LEV0
+#define PWR_PVDLEVEL_1 PWR_CR1_PLS_LEV1
+#define PWR_PVDLEVEL_2 PWR_CR1_PLS_LEV2
+#define PWR_PVDLEVEL_3 PWR_CR1_PLS_LEV3
+#define PWR_PVDLEVEL_4 PWR_CR1_PLS_LEV4
+#define PWR_PVDLEVEL_5 PWR_CR1_PLS_LEV5
+#define PWR_PVDLEVEL_6 PWR_CR1_PLS_LEV6
+#define PWR_PVDLEVEL_7 PWR_CR1_PLS_LEV7/* External input analog voltage
+ (Compare internally to VREFINT) */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_PVD_Mode PWR PVD Mode
+ * @{
+ */
+#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000U) /*!< basic mode is used */
+#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001U) /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002U) /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000U)
+#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPDS
+/**
+ * @}
+ */
+
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+ * @{
+ */
+#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01U)
+#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02U)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+ * @{
+ */
+#define PWR_STOPENTRY_WFI ((uint8_t)0x01U)
+#define PWR_STOPENTRY_WFE ((uint8_t)0x02U)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale
+ * @{
+ */
+#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR1_VOS
+#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR1_VOS_1
+#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR1_VOS_0
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Flag PWR Flag
+ * @{
+ */
+#define PWR_FLAG_WU PWR_CSR1_WUIF
+#define PWR_FLAG_SB PWR_CSR1_SBF
+#define PWR_FLAG_PVDO PWR_CSR1_PVDO
+#define PWR_FLAG_BRR PWR_CSR1_BRR
+#define PWR_FLAG_VOSRDY PWR_CSR1_VOSRDY
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+ * @{
+ */
+
+/** @brief macros configure the main internal regulator output voltage.
+ * @param __REGULATOR__ specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power consumption when the device does
+ * not operate at the maximum frequency (refer to the datasheets for more details).
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
+ * @retval None
+ */
+#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
+ __IO uint32_t tmpreg; \
+ MODIFY_REG(PWR->CR1, PWR_CR1_VOS, (__REGULATOR__)); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(PWR->CR1, PWR_CR1_VOS); \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Check PWR flag is set or not.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
+ * was received on the internal wakeup line in standby mode (RTC alarm (Alarm A or Alarm B),
+ * RTC Tamper event, RTC TimeStamp event or RTC Wakeup)).
+ * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+ * resumed from StandBy mode.
+ * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
+ * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+ * For this reason, this bit is equal to 0 after Standby or reset
+ * until the PVDE bit is set.
+ * @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset
+ * when the device wakes up from Standby mode or by a system reset
+ * or power reset.
+ * @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage
+ * scaling output selection is ready.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the PWR's pending flags.
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_SB: StandBy flag
+ */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR1 |= (__FLAG__) << 2)
+
+/**
+ * @brief Enable the PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable the PVD EXTI Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Enable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Enable the PVD Extended Interrupt Rising Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Disable the PVD Extended Interrupt Rising Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Enable the PVD Extended Interrupt Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+ * @brief Disable the PVD Extended Interrupt Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+ * @brief PVD EXTI line configuration: set rising & falling edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+ * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+ * @brief checks whether the specified PVD Exti interrupt flag is set or not.
+ * @retval EXTI PVD Line Status.
+ */
+#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Clear the PVD Exti flag.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Generates a Software interrupt on PVD EXTI line.
+ * @retval None
+ */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @}
+ */
+
+/* Include PWR HAL Extension module */
+#include "stm32f7xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+/**
+ * @}
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions **********************************************/
+/* PVD configuration */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+
+/* WakeUp pins configuration */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes entry */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+/* Power PVD IRQ Handler */
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+
+/* Cortex System Control functions *******************************************/
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PWR_Private_Constants PWR Private Constants
+ * @{
+ */
+
+/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
+ * @{
+ */
+#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_IM16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWR_Private_Macros PWR Private Macros
+ * @{
+ */
+
+/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
+ * @{
+ */
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+ ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+ ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+ ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+ ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_NORMAL))
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h
new file mode 100644
index 00000000..0c8b81dc
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h
@@ -0,0 +1,278 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_pwr_ex.h
+ * @author MCD Application Team
+ * @brief Header file of PWR HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_PWR_EX_H
+#define __STM32F7xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWREx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+ * @{
+ */
+/** @defgroup PWREx_WakeUp_Pins PWREx Wake Up Pins
+ * @{
+ */
+#define PWR_WAKEUP_PIN1 PWR_CSR2_EWUP1
+#define PWR_WAKEUP_PIN2 PWR_CSR2_EWUP2
+#define PWR_WAKEUP_PIN3 PWR_CSR2_EWUP3
+#define PWR_WAKEUP_PIN4 PWR_CSR2_EWUP4
+#define PWR_WAKEUP_PIN5 PWR_CSR2_EWUP5
+#define PWR_WAKEUP_PIN6 PWR_CSR2_EWUP6
+#define PWR_WAKEUP_PIN1_HIGH PWR_CSR2_EWUP1
+#define PWR_WAKEUP_PIN2_HIGH PWR_CSR2_EWUP2
+#define PWR_WAKEUP_PIN3_HIGH PWR_CSR2_EWUP3
+#define PWR_WAKEUP_PIN4_HIGH PWR_CSR2_EWUP4
+#define PWR_WAKEUP_PIN5_HIGH PWR_CSR2_EWUP5
+#define PWR_WAKEUP_PIN6_HIGH PWR_CSR2_EWUP6
+#define PWR_WAKEUP_PIN1_LOW (uint32_t)((PWR_CR2_WUPP1<<6) | PWR_CSR2_EWUP1)
+#define PWR_WAKEUP_PIN2_LOW (uint32_t)((PWR_CR2_WUPP2<<6) | PWR_CSR2_EWUP2)
+#define PWR_WAKEUP_PIN3_LOW (uint32_t)((PWR_CR2_WUPP3<<6) | PWR_CSR2_EWUP3)
+#define PWR_WAKEUP_PIN4_LOW (uint32_t)((PWR_CR2_WUPP4<<6) | PWR_CSR2_EWUP4)
+#define PWR_WAKEUP_PIN5_LOW (uint32_t)((PWR_CR2_WUPP5<<6) | PWR_CSR2_EWUP5)
+#define PWR_WAKEUP_PIN6_LOW (uint32_t)((PWR_CR2_WUPP6<<6) | PWR_CSR2_EWUP6)
+
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR1_MRUDS
+#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR1_LPDS | PWR_CR1_LPUDS))
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag
+ * @{
+ */
+#define PWR_FLAG_ODRDY PWR_CSR1_ODRDY
+#define PWR_FLAG_ODSWRDY PWR_CSR1_ODSWRDY
+#define PWR_FLAG_UDRDY PWR_CSR1_UDRDY
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_Wakeup_Pins_Flag PWREx Wake Up Pin Flags
+ * @{
+ */
+#define PWR_WAKEUP_PIN_FLAG1 PWR_CSR2_WUPF1
+#define PWR_WAKEUP_PIN_FLAG2 PWR_CSR2_WUPF2
+#define PWR_WAKEUP_PIN_FLAG3 PWR_CSR2_WUPF3
+#define PWR_WAKEUP_PIN_FLAG4 PWR_CSR2_WUPF4
+#define PWR_WAKEUP_PIN_FLAG5 PWR_CSR2_WUPF5
+#define PWR_WAKEUP_PIN_FLAG6 PWR_CSR2_WUPF6
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Macro PWREx Exported Macro
+ * @{
+ */
+/** @brief Macros to enable or disable the Over drive mode.
+ */
+#define __HAL_PWR_OVERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODEN)
+#define __HAL_PWR_OVERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODEN))
+
+/** @brief Macros to enable or disable the Over drive switching.
+ */
+#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODSWEN)
+#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODSWEN))
+
+/** @brief Macros to enable or disable the Under drive mode.
+ * @note This mode is enabled only with STOP low power mode.
+ * In this mode, the 1.2V domain is preserved in reduced leakage mode. This
+ * mode is only available when the main regulator or the low power regulator
+ * is in low voltage mode.
+ * @note If the Under-drive mode was enabled, it is automatically disabled after
+ * exiting Stop mode.
+ * When the voltage regulator operates in Under-drive mode, an additional
+ * startup delay is induced when waking up from Stop mode.
+ */
+#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_UDEN)
+#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_UDEN))
+
+/** @brief Check PWR flag is set or not.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
+ * is ready
+ * @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
+ * switching is ready
+ * @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
+ * is enabled in Stop mode
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the Under-Drive Ready flag.
+ */
+#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR1 |= PWR_FLAG_UDRDY)
+
+/** @brief Check Wake Up flag is set or not.
+ * @param __WUFLAG__ specifies the Wake Up flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0
+ * @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2
+ * @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1
+ * @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13
+ * @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8
+ * @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11
+ */
+#define __HAL_PWR_GET_WAKEUP_FLAG(__WUFLAG__) (PWR->CSR2 & (__WUFLAG__))
+
+/** @brief Clear the WakeUp pins flags.
+ * @param __WUFLAG__ specifies the Wake Up pin flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0
+ * @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2
+ * @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1
+ * @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13
+ * @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8
+ * @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11
+ */
+#define __HAL_PWR_CLEAR_WAKEUP_FLAG(__WUFLAG__) (PWR->CR2 |= (__WUFLAG__))
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWREx_Exported_Functions_Group1
+ * @{
+ */
+uint32_t HAL_PWREx_GetVoltageRange(void);
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
+
+void HAL_PWREx_EnableFlashPowerDown(void);
+void HAL_PWREx_DisableFlashPowerDown(void);
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
+
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
+
+HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWREx_Private_Macros PWREx Private Macros
+ * @{
+ */
+
+/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
+ * @{
+ */
+#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
+#define IS_PWR_WAKEUP_PIN(__PIN__) (((__PIN__) == PWR_WAKEUP_PIN1) || \
+ ((__PIN__) == PWR_WAKEUP_PIN2) || \
+ ((__PIN__) == PWR_WAKEUP_PIN3) || \
+ ((__PIN__) == PWR_WAKEUP_PIN4) || \
+ ((__PIN__) == PWR_WAKEUP_PIN5) || \
+ ((__PIN__) == PWR_WAKEUP_PIN6) || \
+ ((__PIN__) == PWR_WAKEUP_PIN1_HIGH) || \
+ ((__PIN__) == PWR_WAKEUP_PIN2_HIGH) || \
+ ((__PIN__) == PWR_WAKEUP_PIN3_HIGH) || \
+ ((__PIN__) == PWR_WAKEUP_PIN4_HIGH) || \
+ ((__PIN__) == PWR_WAKEUP_PIN5_HIGH) || \
+ ((__PIN__) == PWR_WAKEUP_PIN6_HIGH) || \
+ ((__PIN__) == PWR_WAKEUP_PIN1_LOW) || \
+ ((__PIN__) == PWR_WAKEUP_PIN2_LOW) || \
+ ((__PIN__) == PWR_WAKEUP_PIN3_LOW) || \
+ ((__PIN__) == PWR_WAKEUP_PIN4_LOW) || \
+ ((__PIN__) == PWR_WAKEUP_PIN5_LOW) || \
+ ((__PIN__) == PWR_WAKEUP_PIN6_LOW))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h
new file mode 100644
index 00000000..493258b6
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h
@@ -0,0 +1,1326 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_rcc.h
+ * @author MCD Application Team
+ * @brief Header file of RCC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_RCC_H
+#define __STM32F7xx_HAL_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/* Include RCC HAL Extended module */
+/* (include on top of file since RCC structures are defined in extended file) */
+#include "stm32f7xx_hal_rcc_ex.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Types RCC Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
+ */
+typedef struct
+{
+ uint32_t OscillatorType; /*!< The oscillators to be configured.
+ This parameter can be a value of @ref RCC_Oscillator_Type */
+
+ uint32_t HSEState; /*!< The new state of the HSE.
+ This parameter can be a value of @ref RCC_HSE_Config */
+
+ uint32_t LSEState; /*!< The new state of the LSE.
+ This parameter can be a value of @ref RCC_LSE_Config */
+
+ uint32_t HSIState; /*!< The new state of the HSI.
+ This parameter can be a value of @ref RCC_HSI_Config */
+
+ uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT).
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+
+ uint32_t LSIState; /*!< The new state of the LSI.
+ This parameter can be a value of @ref RCC_LSI_Config */
+
+ RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
+
+}RCC_OscInitTypeDef;
+
+/**
+ * @brief RCC System, AHB and APB busses clock configuration structure definition
+ */
+typedef struct
+{
+ uint32_t ClockType; /*!< The clock to be configured.
+ This parameter can be a value of @ref RCC_System_Clock_Type */
+
+ uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock.
+ This parameter can be a value of @ref RCC_System_Clock_Source */
+
+ uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+ This parameter can be a value of @ref RCC_AHB_Clock_Source */
+
+ uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+ uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+}RCC_ClkInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_Exported_Constants RCC Exported Constants
+ * @{
+ */
+
+/** @defgroup RCC_Oscillator_Type Oscillator Type
+ * @{
+ */
+#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000U)
+#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001U)
+#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002U)
+#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004U)
+#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Config RCC HSE Config
+ * @{
+ */
+#define RCC_HSE_OFF ((uint32_t)0x00000000U)
+#define RCC_HSE_ON RCC_CR_HSEON
+#define RCC_HSE_BYPASS ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Config RCC LSE Config
+ * @{
+ */
+#define RCC_LSE_OFF ((uint32_t)0x00000000U)
+#define RCC_LSE_ON RCC_BDCR_LSEON
+#define RCC_LSE_BYPASS ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSEON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Config RCC HSI Config
+ * @{
+ */
+#define RCC_HSI_OFF ((uint32_t)0x00000000U)
+#define RCC_HSI_ON RCC_CR_HSION
+
+#define RCC_HSICALIBRATION_DEFAULT ((uint32_t)0x10U) /* Default HSI calibration trimming value */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Config RCC LSI Config
+ * @{
+ */
+#define RCC_LSI_OFF ((uint32_t)0x00000000U)
+#define RCC_LSI_ON RCC_CSR_LSION
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Config RCC PLL Config
+ * @{
+ */
+#define RCC_PLL_NONE ((uint32_t)0x00000000U)
+#define RCC_PLL_OFF ((uint32_t)0x00000001U)
+#define RCC_PLL_ON ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider
+ * @{
+ */
+#define RCC_PLLP_DIV2 ((uint32_t)0x00000002U)
+#define RCC_PLLP_DIV4 ((uint32_t)0x00000004U)
+#define RCC_PLLP_DIV6 ((uint32_t)0x00000006U)
+#define RCC_PLLP_DIV8 ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Clock_Source PLL Clock Source
+ * @{
+ */
+#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI
+#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Type RCC System Clock Type
+ * @{
+ */
+#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001U)
+#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002U)
+#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004U)
+#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source RCC System Clock Source
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI
+#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE
+#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL
+/**
+ * @}
+ */
+
+
+/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Clock_Source RCC AHB Clock Source
+ * @{
+ */
+#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1
+#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2
+#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4
+#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8
+#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16
+#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64
+#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128
+#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256
+#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_APB2_Clock_Source RCC APB1/APB2 Clock Source
+ * @{
+ */
+#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1
+#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2
+#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4
+#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8
+#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16
+/**
+ * @}
+ */
+
+/** @defgroup RCC_RTC_Clock_Source RCC RTC Clock Source
+ * @{
+ */
+#define RCC_RTCCLKSOURCE_NO_CLK ((uint32_t)0x00000000U)
+#define RCC_RTCCLKSOURCE_LSE ((uint32_t)0x00000100U)
+#define RCC_RTCCLKSOURCE_LSI ((uint32_t)0x00000200U)
+#define RCC_RTCCLKSOURCE_HSE_DIVX ((uint32_t)0x00000300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV2 ((uint32_t)0x00020300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV3 ((uint32_t)0x00030300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV4 ((uint32_t)0x00040300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV5 ((uint32_t)0x00050300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV6 ((uint32_t)0x00060300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV7 ((uint32_t)0x00070300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV8 ((uint32_t)0x00080300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV9 ((uint32_t)0x00090300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV10 ((uint32_t)0x000A0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV11 ((uint32_t)0x000B0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV12 ((uint32_t)0x000C0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV13 ((uint32_t)0x000D0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV14 ((uint32_t)0x000E0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV15 ((uint32_t)0x000F0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV16 ((uint32_t)0x00100300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV17 ((uint32_t)0x00110300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV18 ((uint32_t)0x00120300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV19 ((uint32_t)0x00130300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV20 ((uint32_t)0x00140300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV21 ((uint32_t)0x00150300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV22 ((uint32_t)0x00160300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV23 ((uint32_t)0x00170300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV24 ((uint32_t)0x00180300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV25 ((uint32_t)0x00190300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV26 ((uint32_t)0x001A0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV27 ((uint32_t)0x001B0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV28 ((uint32_t)0x001C0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV29 ((uint32_t)0x001D0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV30 ((uint32_t)0x001E0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV31 ((uint32_t)0x001F0300U)
+/**
+ * @}
+ */
+
+
+
+/** @defgroup RCC_MCO_Index RCC MCO Index
+ * @{
+ */
+#define RCC_MCO1 ((uint32_t)0x00000000U)
+#define RCC_MCO2 ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO1_Clock_Source RCC MCO1 Clock Source
+ * @{
+ */
+#define RCC_MCO1SOURCE_HSI ((uint32_t)0x00000000U)
+#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO1_0
+#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO1_1
+#define RCC_MCO1SOURCE_PLLCLK RCC_CFGR_MCO1
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO2_Clock_Source RCC MCO2 Clock Source
+ * @{
+ */
+#define RCC_MCO2SOURCE_SYSCLK ((uint32_t)0x00000000U)
+#define RCC_MCO2SOURCE_PLLI2SCLK RCC_CFGR_MCO2_0
+#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1
+#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCOx_Clock_Prescaler RCC MCO1 Clock Prescaler
+ * @{
+ */
+#define RCC_MCODIV_1 ((uint32_t)0x00000000U)
+#define RCC_MCODIV_2 RCC_CFGR_MCO1PRE_2
+#define RCC_MCODIV_3 ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2)
+#define RCC_MCODIV_4 ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2)
+#define RCC_MCODIV_5 RCC_CFGR_MCO1PRE
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Interrupt RCC Interrupt
+ * @{
+ */
+#define RCC_IT_LSIRDY ((uint8_t)0x01U)
+#define RCC_IT_LSERDY ((uint8_t)0x02U)
+#define RCC_IT_HSIRDY ((uint8_t)0x04U)
+#define RCC_IT_HSERDY ((uint8_t)0x08U)
+#define RCC_IT_PLLRDY ((uint8_t)0x10U)
+#define RCC_IT_PLLI2SRDY ((uint8_t)0x20U)
+#define RCC_IT_PLLSAIRDY ((uint8_t)0x40U)
+#define RCC_IT_CSS ((uint8_t)0x80U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flag RCC Flags
+ * Elements values convention: 0XXYYYYYb
+ * - YYYYY : Flag position in the register
+ * - 0XX : Register index
+ * - 01: CR register
+ * - 10: BDCR register
+ * - 11: CSR register
+ * @{
+ */
+/* Flags in the CR register */
+#define RCC_FLAG_HSIRDY ((uint8_t)0x21U)
+#define RCC_FLAG_HSERDY ((uint8_t)0x31U)
+#define RCC_FLAG_PLLRDY ((uint8_t)0x39U)
+#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3BU)
+#define RCC_FLAG_PLLSAIRDY ((uint8_t)0x3CU)
+
+/* Flags in the BDCR register */
+#define RCC_FLAG_LSERDY ((uint8_t)0x41U)
+
+/* Flags in the CSR register */
+#define RCC_FLAG_LSIRDY ((uint8_t)0x61U)
+#define RCC_FLAG_BORRST ((uint8_t)0x79U)
+#define RCC_FLAG_PINRST ((uint8_t)0x7AU)
+#define RCC_FLAG_PORRST ((uint8_t)0x7BU)
+#define RCC_FLAG_SFTRST ((uint8_t)0x7CU)
+#define RCC_FLAG_IWDGRST ((uint8_t)0x7DU)
+#define RCC_FLAG_WWDGRST ((uint8_t)0x7EU)
+#define RCC_FLAG_LPWRRST ((uint8_t)0x7FU)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSEDrive_Configuration RCC LSE Drive configurations
+ * @{
+ */
+#define RCC_LSEDRIVE_LOW ((uint32_t)0x00000000U)
+#define RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_1
+#define RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_0
+#define RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCC_Exported_Macros RCC Exported Macros
+ * @{
+ */
+
+/** @defgroup RCC_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_DMA1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA1EN))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_WWDG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_PWR_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
+#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA1EN)) != RESET)
+
+#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
+#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA1EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET)
+#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET)
+
+#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET)
+#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief EGet the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET)
+#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Peripheral_Clock_Force_Release RCC Peripheral Clock Force Release
+ * @brief Force or release AHB peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+#define __HAL_RCC_DMA1_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST))
+
+#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U)
+#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+#define __HAL_RCC_DMA1_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA1RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
+
+#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00U)
+#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
+
+#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U)
+#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Peripheral_Clock_Sleep_Enable_Disable RCC Peripheral Clock Sleep Enable Disable
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN))
+
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA1LPEN))
+
+/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_WWDGLPEN))
+#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_PWRLPEN))
+
+#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_WWDGLPEN))
+#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_PWRLPEN))
+
+/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SYSCFGLPEN))
+#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SYSCFGLPEN))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB1_Clock_Sleep_Enable_Disable_Status AHB1 Peripheral Clock Sleep Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_CRCLPEN)) != RESET)
+#define __HAL_RCC_DMA1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA1LPEN)) != RESET)
+
+#define __HAL_RCC_CRC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_CRCLPEN)) == RESET)
+#define __HAL_RCC_DMA1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA1LPEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable_Status APB1 Peripheral Clock Sleep Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_WWDG_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_WWDGLPEN)) != RESET)
+#define __HAL_RCC_PWR_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_PWRLPEN)) != RESET)
+
+#define __HAL_RCC_WWDG_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_WWDGLPEN)) == RESET)
+#define __HAL_RCC_PWR_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_PWRLPEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable_Status APB2 Peripheral Clock Sleep Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SYSCFGLPEN)) != RESET)
+#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SYSCFGLPEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Configuration HSI Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
+ * @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
+ * It is used (enabled by hardware) as system clock source after startup
+ * from Reset, wakeup from STOP and STANDBY mode, or in case of failure
+ * of the HSE used directly or indirectly as system clock (if the Clock
+ * Security System CSS is enabled).
+ * @note HSI can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI.
+ * @note After enabling the HSI, the application software should wait on HSIRDY
+ * flag to be set indicating that HSI clock is stable and can be used as
+ * system clock source.
+ * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_HSI_ENABLE() (RCC->CR |= (RCC_CR_HSION))
+#define __HAL_RCC_HSI_DISABLE() (RCC->CR &= ~(RCC_CR_HSION))
+
+/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
+ * @note The calibration is used to compensate for the variations in voltage
+ * and temperature that influence the frequency of the internal HSI RC.
+ * @param __HSICALIBRATIONVALUE__ specifies the calibration trimming value.
+ * (default is RCC_HSICALIBRATION_DEFAULT).
+ */
+#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICALIBRATIONVALUE__) (MODIFY_REG(RCC->CR,\
+ RCC_CR_HSITRIM, (uint32_t)(__HSICALIBRATIONVALUE__) << RCC_CR_HSITRIM_Pos))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Configuration LSI Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI).
+ * @note After enabling the LSI, the application software should wait on
+ * LSIRDY flag to be set indicating that LSI clock is stable and can
+ * be used to clock the IWDG and/or the RTC.
+ * @note LSI can not be disabled if the IWDG is running.
+ * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_LSI_ENABLE() (RCC->CSR |= (RCC_CSR_LSION))
+#define __HAL_RCC_LSI_DISABLE() (RCC->CSR &= ~(RCC_CSR_LSION))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Configuration HSE Configuration
+ * @{
+ */
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE).
+ * @note Transitions HSE Bypass to HSE On and HSE On to HSE Bypass are not
+ * supported by this macro. User should request a transition to HSE Off
+ * first and then HSE On or HSE Bypass.
+ * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
+ * software should wait on HSERDY flag to be set indicating that HSE clock
+ * is stable and can be used to clock the PLL and/or system clock.
+ * @note HSE state can not be changed if it is used directly or through the
+ * PLL as system clock. In this case, you have to select another source
+ * of the system clock then change the HSE state (ex. disable it).
+ * @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
+ * @note This function reset the CSSON bit, so if the clock security system(CSS)
+ * was previously enabled you have to enable it again after calling this
+ * function.
+ * @param __STATE__ specifies the new state of the HSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
+ * 6 HSE oscillator clock cycles.
+ * @arg RCC_HSE_ON: turn ON the HSE oscillator.
+ * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock.
+ */
+#define __HAL_RCC_HSE_CONFIG(__STATE__) \
+ do { \
+ if ((__STATE__) == RCC_HSE_ON) \
+ { \
+ SET_BIT(RCC->CR, RCC_CR_HSEON); \
+ } \
+ else if ((__STATE__) == RCC_HSE_OFF) \
+ { \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \
+ } \
+ else if ((__STATE__) == RCC_HSE_BYPASS) \
+ { \
+ SET_BIT(RCC->CR, RCC_CR_HSEBYP); \
+ SET_BIT(RCC->CR, RCC_CR_HSEON); \
+ } \
+ else \
+ { \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \
+ } \
+ } while(0)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Configuration LSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External Low Speed oscillator (LSE).
+ * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro.
+ * User should request a transition to LSE Off first and then LSE On or LSE Bypass.
+ * @note As the LSE is in the Backup domain and write access is denied to
+ * this domain after reset, you have to enable write access using
+ * HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+ * (to be done once after reset).
+ * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
+ * software should wait on LSERDY flag to be set indicating that LSE clock
+ * is stable and can be used to clock the RTC.
+ * @param __STATE__ specifies the new state of the LSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
+ * 6 LSE oscillator clock cycles.
+ * @arg RCC_LSE_ON: turn ON the LSE oscillator.
+ * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock.
+ */
+#define __HAL_RCC_LSE_CONFIG(__STATE__) \
+ do { \
+ if((__STATE__) == RCC_LSE_ON) \
+ { \
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ } \
+ else if((__STATE__) == RCC_LSE_OFF) \
+ { \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
+ } \
+ else if((__STATE__) == RCC_LSE_BYPASS) \
+ { \
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ } \
+ else \
+ { \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
+ } \
+ } while(0)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Internal_RTC_Clock_Configuration RTC Clock Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the RTC clock.
+ * @note These macros must be used only after the RTC clock source was selected.
+ */
+#define __HAL_RCC_RTC_ENABLE() (RCC->BDCR |= (RCC_BDCR_RTCEN))
+#define __HAL_RCC_RTC_DISABLE() (RCC->BDCR &= ~(RCC_BDCR_RTCEN))
+
+/** @brief Macros to configure the RTC clock (RTCCLK).
+ * @note As the RTC clock configuration bits are in the Backup domain and write
+ * access is denied to this domain after reset, you have to enable write
+ * access using the Power Backup Access macro before to configure
+ * the RTC clock source (to be done once after reset).
+ * @note Once the RTC clock is configured it can't be changed unless the
+ * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by
+ * a Power On Reset (POR).
+ * @param __RTCCLKSource__ specifies the RTC clock source.
+ * This parameter can be one of the following values:
+ @arg @ref RCC_RTCCLKSOURCE_NO_CLK: No clock selected as RTC clock.
+ * @arg @ref RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock.
+ * @arg @ref RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock.
+ * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX: HSE clock divided by x selected
+ * as RTC clock, where x:[2,31]
+ * @note If the LSE or LSI is used as RTC clock source, the RTC continues to
+ * work in STOP and STANDBY modes, and can be used as wakeup source.
+ * However, when the HSE clock is used as RTC clock source, the RTC
+ * cannot be used in STOP and STANDBY modes.
+ * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as
+ * RTC clock source).
+ */
+#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ? \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFF)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)
+
+#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__); \
+ RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFF); \
+ } while (0)
+
+/** @brief Macro to get the RTC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER()
+ */
+#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL))
+
+/**
+ * @brief Get the RTC and HSE clock divider (RTCPRE).
+ * @retval Returned value can be one of the following values:
+ * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX: HSE clock divided by x selected
+ * as RTC clock, where x:[2,31]
+ */
+#define __HAL_RCC_GET_RTC_HSE_PRESCALER() (READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE) | RCC_BDCR_RTCSEL)
+
+/** @brief Macros to force or release the Backup domain reset.
+ * @note This function resets the RTC peripheral (including the backup registers)
+ * and the RTC clock source selection in RCC_CSR register.
+ * @note The BKPSRAM is not affected by this reset.
+ */
+#define __HAL_RCC_BACKUPRESET_FORCE() (RCC->BDCR |= (RCC_BDCR_BDRST))
+#define __HAL_RCC_BACKUPRESET_RELEASE() (RCC->BDCR &= ~(RCC_BDCR_BDRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Configuration PLL Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the main PLL.
+ * @note After enabling the main PLL, the application software should wait on
+ * PLLRDY flag to be set indicating that PLL clock is stable and can
+ * be used as system clock source.
+ * @note The main PLL can not be disabled if it is used as system clock source
+ * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON)
+#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON)
+
+/** @brief Macro to configure the PLL clock source.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __PLLSOURCE__ specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ *
+ */
+#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__))
+
+/** @brief Macro to configure the PLL multiplication factor.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __PLLM__ specifies the division factor for PLL VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLL jitter.
+ *
+ */
+#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, (__PLLM__))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_I2S_Configuration PLL I2S Configuration
+ * @{
+ */
+
+/** @brief Macro to configure the I2S clock source (I2SCLK).
+ * @note This function must be called before enabling the I2S APB clock.
+ * @param __SOURCE__ specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source.
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source.
+ */
+#define __HAL_RCC_I2S_CONFIG(__SOURCE__) do {RCC->CFGR &= ~(RCC_CFGR_I2SSRC); \
+ RCC->CFGR |= (__SOURCE__); \
+ }while(0)
+
+/** @brief Macros to enable or disable the PLLI2S.
+ * @note The PLLI2S is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLLI2S_ENABLE() (RCC->CR |= (RCC_CR_PLLI2SON))
+#define __HAL_RCC_PLLI2S_DISABLE() (RCC->CR &= ~(RCC_CR_PLLI2SON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Get_Clock_source Get Clock source
+ * @{
+ */
+/**
+ * @brief Macro to configure the system clock source.
+ * @param __RCC_SYSCLKSOURCE__ specifies the system clock source.
+ * This parameter can be one of the following values:
+ * - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source.
+ * - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source.
+ * - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source.
+ */
+#define __HAL_RCC_SYSCLK_CONFIG(__RCC_SYSCLKSOURCE__) MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__RCC_SYSCLKSOURCE__))
+
+/** @brief Macro to get the clock source used as system clock.
+ * @retval The clock source used as system clock. The returned value can be one
+ * of the following:
+ * - RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock.
+ * - RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock.
+ * - RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock.
+ */
+#define __HAL_RCC_GET_SYSCLK_SOURCE() (RCC->CFGR & RCC_CFGR_SWS)
+
+/**
+ * @brief Macro to configures the External Low Speed oscillator (LSE) drive capability.
+ * @note As the LSE is in the Backup domain and write access is denied to
+ * this domain after reset, you have to enable write access using
+ * HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+ * (to be done once after reset).
+ * @param __RCC_LSEDRIVE__ specifies the new state of the LSE drive capability.
+ * This parameter can be one of the following values:
+ * @arg RCC_LSEDRIVE_LOW: LSE oscillator low drive capability.
+ * @arg RCC_LSEDRIVE_MEDIUMLOW: LSE oscillator medium low drive capability.
+ * @arg RCC_LSEDRIVE_MEDIUMHIGH: LSE oscillator medium high drive capability.
+ * @arg RCC_LSEDRIVE_HIGH: LSE oscillator high drive capability.
+ * @retval None
+ */
+#define __HAL_RCC_LSEDRIVE_CONFIG(__RCC_LSEDRIVE__) \
+ (MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, (uint32_t)(__RCC_LSEDRIVE__) ))
+
+/** @brief Macro to get the oscillator used as PLL clock source.
+ * @retval The oscillator used as PLL clock source. The returned value can be one
+ * of the following:
+ * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source.
+ * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source.
+ */
+#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the MCO1 clock.
+ * @param __MCOCLKSOURCE__ specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
+ * @param __MCODIV__ specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCODIV_1: no division applied to MCOx clock
+ * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
+ * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
+ * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
+ * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
+ */
+
+#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
+
+/** @brief Macro to configure the MCO2 clock.
+ * @param __MCOCLKSOURCE__ specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
+ * @param __MCODIV__ specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCODIV_1: no division applied to MCOx clock
+ * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
+ * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
+ * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
+ * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
+ */
+
+#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3)));
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management
+ * @brief macros to manage the specified RCC Flags and interrupts.
+ * @{
+ */
+
+/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to enable
+ * the selected interrupts).
+ * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ */
+#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
+
+/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to disable
+ * the selected interrupts).
+ * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ */
+#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__)))
+
+/** @brief Clear the RCC's interrupt pending bits (Perform Byte access to RCC_CIR[23:16]
+ * bits to clear the selected interrupt pending bits.
+ * @param __INTERRUPT__ specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ */
+#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__))
+
+/** @brief Check the RCC's interrupt has occurred or not.
+ * @param __INTERRUPT__ specifies the RCC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_PINRST, RCC_FLAG_PORRST,
+ * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST.
+ */
+#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF)
+
+/** @brief Check RCC flag is set or not.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready.
+ * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready.
+ * @arg RCC_FLAG_PLLRDY: Main PLL clock ready.
+ * @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready.
+ * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready.
+ * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready.
+ * @arg RCC_FLAG_BORRST: POR/PDR or BOR reset.
+ * @arg RCC_FLAG_PINRST: Pin reset.
+ * @arg RCC_FLAG_PORRST: POR/PDR reset.
+ * @arg RCC_FLAG_SFTRST: Software reset.
+ * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset.
+ * @arg RCC_FLAG_WWDGRST: Window Watchdog reset.
+ * @arg RCC_FLAG_LPWRRST: Low Power reset.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define RCC_FLAG_MASK ((uint8_t)0x1F)
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5) == 1)? RCC->CR :((((__FLAG__) >> 5) == 2) ? RCC->BDCR :((((__FLAG__) >> 5) == 3)? RCC->CSR :RCC->CIR))) & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK)))!= 0)? 1 : 0)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Include RCC HAL Extension module */
+#include "stm32f7xx_hal_rcc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+ /** @addtogroup RCC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions ******************************/
+HAL_StatusTypeDef HAL_RCC_DeInit(void);
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
+void HAL_RCC_EnableCSS(void);
+void HAL_RCC_DisableCSS(void);
+uint32_t HAL_RCC_GetSysClockFreq(void);
+uint32_t HAL_RCC_GetHCLKFreq(void);
+uint32_t HAL_RCC_GetPCLK1Freq(void);
+uint32_t HAL_RCC_GetPCLK2Freq(void);
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
+
+/* CSS NMI IRQ handler */
+void HAL_RCC_NMI_IRQHandler(void);
+
+/* User Callbacks in non blocking mode (IT mode) */
+void HAL_RCC_CSSCallback(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RCC_Private_Constants RCC Private Constants
+ * @{
+ */
+#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT
+#define HSI_TIMEOUT_VALUE ((uint32_t)2) /* 2 ms */
+#define LSI_TIMEOUT_VALUE ((uint32_t)2) /* 2 ms */
+#define PLL_TIMEOUT_VALUE ((uint32_t)2) /* 2 ms */
+#define CLOCKSWITCH_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */
+#define PLLI2S_TIMEOUT_VALUE 100U /* Timeout value fixed to 100 ms */
+#define PLLSAI_TIMEOUT_VALUE 100U /* Timeout value fixed to 100 ms */
+
+/** @defgroup RCC_BitAddress_Alias RCC BitAddress Alias
+ * @brief RCC registers bit address alias
+ * @{
+ */
+/* CIR register byte 2 (Bits[15:8]) base address */
+#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x01))
+
+/* CIR register byte 3 (Bits[23:16]) base address */
+#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x02))
+
+#define RCC_DBP_TIMEOUT_VALUE ((uint32_t)100)
+#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup RCC_Private_Macros RCC Private Macros
+ * @{
+ */
+
+/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters
+ * @{
+ */
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) ((OSCILLATOR) <= 15)
+
+#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
+ ((HSE) == RCC_HSE_BYPASS))
+
+#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
+ ((LSE) == RCC_LSE_BYPASS))
+
+#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON))
+
+#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON))
+
+#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON))
+
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSE))
+
+#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK))
+#define IS_RCC_PLLM_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 63))
+
+#define IS_RCC_PLLN_VALUE(VALUE) ((50 <= (VALUE)) && ((VALUE) <= 432))
+
+#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == RCC_PLLP_DIV2) || ((VALUE) == RCC_PLLP_DIV4) || \
+ ((VALUE) == RCC_PLLP_DIV6) || ((VALUE) == RCC_PLLP_DIV8))
+#define IS_RCC_PLLQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
+
+#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_DIV1) || ((HCLK) == RCC_SYSCLK_DIV2) || \
+ ((HCLK) == RCC_SYSCLK_DIV4) || ((HCLK) == RCC_SYSCLK_DIV8) || \
+ ((HCLK) == RCC_SYSCLK_DIV16) || ((HCLK) == RCC_SYSCLK_DIV64) || \
+ ((HCLK) == RCC_SYSCLK_DIV128) || ((HCLK) == RCC_SYSCLK_DIV256) || \
+ ((HCLK) == RCC_SYSCLK_DIV512))
+
+#define IS_RCC_CLOCKTYPE(CLK) ((1 <= (CLK)) && ((CLK) <= 15))
+
+#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_DIV1) || ((PCLK) == RCC_HCLK_DIV2) || \
+ ((PCLK) == RCC_HCLK_DIV4) || ((PCLK) == RCC_HCLK_DIV8) || \
+ ((PCLK) == RCC_HCLK_DIV16))
+
+#define IS_RCC_MCO(MCOX) (((MCOX) == RCC_MCO1) || ((MCOX) == RCC_MCO2))
+
+
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLLCLK))
+
+#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_PLLI2SCLK)|| \
+ ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK))
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \
+ ((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \
+ ((DIV) == RCC_MCODIV_5))
+#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
+
+#define IS_RCC_RTCCLKSOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSOURCE_LSE) || ((SOURCE) == RCC_RTCCLKSOURCE_LSI) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV2) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV3) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV4) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV5) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV6) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV7) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV8) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV9) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV10) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV11) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV12) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV13) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV14) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV15) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV16) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV17) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV18) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV19) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV20) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV21) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV22) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV23) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV24) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV25) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV26) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV27) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV28) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV29) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV30) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV31))
+
+
+#define IS_RCC_LSE_DRIVE(DRIVE) (((DRIVE) == RCC_LSEDRIVE_LOW) || \
+ ((DRIVE) == RCC_LSEDRIVE_MEDIUMLOW) || \
+ ((DRIVE) == RCC_LSEDRIVE_MEDIUMHIGH) || \
+ ((DRIVE) == RCC_LSEDRIVE_HIGH))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h
new file mode 100644
index 00000000..3e76778e
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h
@@ -0,0 +1,3520 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_rcc_ex.h
+ * @author MCD Application Team
+ * @brief Header file of RCC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_RCC_EX_H
+#define __STM32F7xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC PLL configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PLLState; /*!< The new state of the PLL.
+ This parameter can be a value of @ref RCC_PLL_Config */
+
+ uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source.
+ This parameter must be a value of @ref RCC_PLL_Clock_Source */
+
+ uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 63 */
+
+ uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432 */
+
+ uint32_t PLLP; /*!< PLLP: Division factor for main system clock (SYSCLK).
+ This parameter must be a value of @ref RCC_PLLP_Clock_Divider */
+
+ uint32_t PLLQ; /*!< PLLQ: Division factor for OTG FS, SDMMC and RNG clocks.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15 */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ uint32_t PLLR; /*!< PLLR: Division factor for DSI clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7 */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+}RCC_PLLInitTypeDef;
+
+/**
+ * @brief PLLI2S Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || defined (STM32F767xx) || \
+ defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ uint32_t PLLI2SP; /*!< Specifies the division factor for SPDIF-RX clock.
+ This parameter must be a value of @ref RCCEx_PLLI2SP_Clock_Divider.
+ This parameter will be used only when PLLI2S is selected as Clock Source SPDIF-RX */
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+}RCC_PLLI2SInitTypeDef;
+
+/**
+ * @brief PLLSAI Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || defined (STM32F767xx) || \
+ defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ uint32_t PLLSAIR; /*!< specifies the division factor for LTDC clock
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLSAI is selected as Clock Source LTDC */
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+ uint32_t PLLSAIP; /*!< Specifies the division factor for 48MHz clock.
+ This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider
+ This parameter will be used only when PLLSAI is disabled */
+}RCC_PLLSAIInitTypeDef;
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+ uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI */
+
+ uint32_t PLLSAIDivR; /*!< Specifies the PLLSAI division factor for LTDC clock.
+ This parameter must be one value of @ref RCCEx_PLLSAI_DIVR */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock source Selection.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< Specifies I2S Clock source Selection.
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t TIMPresSelection; /*!< Specifies TIM Clock Prescalers Selection.
+ This parameter can be a value of @ref RCCEx_TIM_Prescaler_Selection */
+
+ uint32_t Sai1ClockSelection; /*!< Specifies SAI1 Clock Prescalers Selection
+ This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */
+
+ uint32_t Sai2ClockSelection; /*!< Specifies SAI2 Clock Prescalers Selection
+ This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCCEx_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t Usart6ClockSelection; /*!< USART6 clock source
+ This parameter can be a value of @ref RCCEx_USART6_Clock_Source */
+
+ uint32_t Uart7ClockSelection; /*!< UART7 clock source
+ This parameter can be a value of @ref RCCEx_UART7_Clock_Source */
+
+ uint32_t Uart8ClockSelection; /*!< UART8 clock source
+ This parameter can be a value of @ref RCCEx_UART8_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCCEx_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t I2c4ClockSelection; /*!< I2C4 clock source
+ This parameter can be a value of @ref RCCEx_I2C4_Clock_Source */
+
+ uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 clock source
+ This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+ uint32_t Clk48ClockSelection; /*!< Specifies 48Mhz clock source used by USB OTG FS, RNG and SDMMC
+ This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */
+
+ uint32_t Sdmmc1ClockSelection; /*!< SDMMC1 clock source
+ This parameter can be a value of @ref RCCEx_SDMMC1_Clock_Source */
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ uint32_t Sdmmc2ClockSelection; /*!< SDMMC2 clock source
+ This parameter can be a value of @ref RCCEx_SDMMC2_Clock_Source */
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ uint32_t Dfsdm1ClockSelection; /*!< DFSDM1 clock source
+ This parameter can be a value of @ref RCCEx_DFSDM1_Kernel_Clock_Source */
+
+ uint32_t Dfsdm1AudioClockSelection; /*!< DFSDM1 clock source
+ This parameter can be a value of @ref RCCEx_DFSDM1_AUDIO_Clock_Source */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+}RCC_PeriphCLKInitTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup RCCEx_Periph_Clock_Selection RCC Periph Clock Selection
+ * @{
+ */
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001U)
+#if defined(STM32F746xx) || defined(STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define RCC_PERIPHCLK_LTDC ((uint32_t)0x00000008U)
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010U)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020U)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000040U)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000080U)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000100U)
+#define RCC_PERIPHCLK_UART4 ((uint32_t)0x00000200U)
+#define RCC_PERIPHCLK_UART5 ((uint32_t)0x00000400U)
+#define RCC_PERIPHCLK_USART6 ((uint32_t)0x00000800U)
+#define RCC_PERIPHCLK_UART7 ((uint32_t)0x00001000U)
+#define RCC_PERIPHCLK_UART8 ((uint32_t)0x00002000U)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00004000U)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00008000U)
+#define RCC_PERIPHCLK_I2C3 ((uint32_t)0x00010000U)
+#define RCC_PERIPHCLK_I2C4 ((uint32_t)0x00020000U)
+#define RCC_PERIPHCLK_LPTIM1 ((uint32_t)0x00040000U)
+#define RCC_PERIPHCLK_SAI1 ((uint32_t)0x00080000U)
+#define RCC_PERIPHCLK_SAI2 ((uint32_t)0x00100000U)
+#define RCC_PERIPHCLK_CLK48 ((uint32_t)0x00200000U)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00400000U)
+#define RCC_PERIPHCLK_SDMMC1 ((uint32_t)0x00800000U)
+#define RCC_PERIPHCLK_SPDIFRX ((uint32_t)0x01000000U)
+#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x02000000U)
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define RCC_PERIPHCLK_SDMMC2 ((uint32_t)0x04000000U)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define RCC_PERIPHCLK_DFSDM1 ((uint32_t)0x08000000U)
+#define RCC_PERIPHCLK_DFSDM1_AUDIO ((uint32_t)0x10000000U)
+#endif /* STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @}
+ */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || defined (STM32F767xx) || \
+ defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/** @defgroup RCCEx_PLLI2SP_Clock_Divider RCCEx PLLI2SP Clock Divider
+ * @{
+ */
+#define RCC_PLLI2SP_DIV2 ((uint32_t)0x00000000U)
+#define RCC_PLLI2SP_DIV4 ((uint32_t)0x00000001U)
+#define RCC_PLLI2SP_DIV6 ((uint32_t)0x00000002U)
+#define RCC_PLLI2SP_DIV8 ((uint32_t)0x00000003U)
+/**
+ * @}
+ */
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @defgroup RCCEx_PLLSAIP_Clock_Divider RCCEx PLLSAIP Clock Divider
+ * @{
+ */
+#define RCC_PLLSAIP_DIV2 ((uint32_t)0x00000000U)
+#define RCC_PLLSAIP_DIV4 ((uint32_t)0x00000001U)
+#define RCC_PLLSAIP_DIV6 ((uint32_t)0x00000002U)
+#define RCC_PLLSAIP_DIV8 ((uint32_t)0x00000003U)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLSAI_DIVR RCCEx PLLSAI DIVR
+ * @{
+ */
+#define RCC_PLLSAIDIVR_2 ((uint32_t)0x00000000U)
+#define RCC_PLLSAIDIVR_4 RCC_DCKCFGR1_PLLSAIDIVR_0
+#define RCC_PLLSAIDIVR_8 RCC_DCKCFGR1_PLLSAIDIVR_1
+#define RCC_PLLSAIDIVR_16 RCC_DCKCFGR1_PLLSAIDIVR
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2S_Clock_Source RCCEx I2S Clock Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_PLLI2S ((uint32_t)0x00000000U)
+#define RCC_I2SCLKSOURCE_EXT RCC_CFGR_I2SSRC
+
+/**
+ * @}
+ */
+
+
+/** @defgroup RCCEx_SAI1_Clock_Source RCCEx SAI1 Clock Source
+ * @{
+ */
+#define RCC_SAI1CLKSOURCE_PLLSAI ((uint32_t)0x00000000U)
+#define RCC_SAI1CLKSOURCE_PLLI2S RCC_DCKCFGR1_SAI1SEL_0
+#define RCC_SAI1CLKSOURCE_PIN RCC_DCKCFGR1_SAI1SEL_1
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define RCC_SAI1CLKSOURCE_PLLSRC RCC_DCKCFGR1_SAI1SEL
+#endif /* STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SAI2_Clock_Source RCCEx SAI2 Clock Source
+ * @{
+ */
+#define RCC_SAI2CLKSOURCE_PLLSAI ((uint32_t)0x00000000U)
+#define RCC_SAI2CLKSOURCE_PLLI2S RCC_DCKCFGR1_SAI2SEL_0
+#define RCC_SAI2CLKSOURCE_PIN RCC_DCKCFGR1_SAI2SEL_1
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define RCC_SAI2CLKSOURCE_PLLSRC RCC_DCKCFGR1_SAI2SEL
+#endif /* STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CEC_Clock_Source RCCEx CEC Clock Source
+ * @{
+ */
+#define RCC_CECCLKSOURCE_LSE ((uint32_t)0x00000000U)
+#define RCC_CECCLKSOURCE_HSI RCC_DCKCFGR2_CECSEL /* CEC clock is HSI/488*/
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_USART1_Clock_Source RCCEx USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 ((uint32_t)0x00000000U)
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_DCKCFGR2_USART1SEL_0
+#define RCC_USART1CLKSOURCE_HSI RCC_DCKCFGR2_USART1SEL_1
+#define RCC_USART1CLKSOURCE_LSE RCC_DCKCFGR2_USART1SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_USART2_Clock_Source RCCEx USART2 Clock Source
+ * @{
+ */
+#define RCC_USART2CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_USART2CLKSOURCE_SYSCLK RCC_DCKCFGR2_USART2SEL_0
+#define RCC_USART2CLKSOURCE_HSI RCC_DCKCFGR2_USART2SEL_1
+#define RCC_USART2CLKSOURCE_LSE RCC_DCKCFGR2_USART2SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_USART3_Clock_Source RCCEx USART3 Clock Source
+ * @{
+ */
+#define RCC_USART3CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_USART3CLKSOURCE_SYSCLK RCC_DCKCFGR2_USART3SEL_0
+#define RCC_USART3CLKSOURCE_HSI RCC_DCKCFGR2_USART3SEL_1
+#define RCC_USART3CLKSOURCE_LSE RCC_DCKCFGR2_USART3SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART4_Clock_Source RCCEx UART4 Clock Source
+ * @{
+ */
+#define RCC_UART4CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_UART4CLKSOURCE_SYSCLK RCC_DCKCFGR2_UART4SEL_0
+#define RCC_UART4CLKSOURCE_HSI RCC_DCKCFGR2_UART4SEL_1
+#define RCC_UART4CLKSOURCE_LSE RCC_DCKCFGR2_UART4SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART5_Clock_Source RCCEx UART5 Clock Source
+ * @{
+ */
+#define RCC_UART5CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_UART5CLKSOURCE_SYSCLK RCC_DCKCFGR2_UART5SEL_0
+#define RCC_UART5CLKSOURCE_HSI RCC_DCKCFGR2_UART5SEL_1
+#define RCC_UART5CLKSOURCE_LSE RCC_DCKCFGR2_UART5SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_USART6_Clock_Source RCCEx USART6 Clock Source
+ * @{
+ */
+#define RCC_USART6CLKSOURCE_PCLK2 ((uint32_t)0x00000000U)
+#define RCC_USART6CLKSOURCE_SYSCLK RCC_DCKCFGR2_USART6SEL_0
+#define RCC_USART6CLKSOURCE_HSI RCC_DCKCFGR2_USART6SEL_1
+#define RCC_USART6CLKSOURCE_LSE RCC_DCKCFGR2_USART6SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART7_Clock_Source RCCEx UART7 Clock Source
+ * @{
+ */
+#define RCC_UART7CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_UART7CLKSOURCE_SYSCLK RCC_DCKCFGR2_UART7SEL_0
+#define RCC_UART7CLKSOURCE_HSI RCC_DCKCFGR2_UART7SEL_1
+#define RCC_UART7CLKSOURCE_LSE RCC_DCKCFGR2_UART7SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART8_Clock_Source RCCEx UART8 Clock Source
+ * @{
+ */
+#define RCC_UART8CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_UART8CLKSOURCE_SYSCLK RCC_DCKCFGR2_UART8SEL_0
+#define RCC_UART8CLKSOURCE_HSI RCC_DCKCFGR2_UART8SEL_1
+#define RCC_UART8CLKSOURCE_LSE RCC_DCKCFGR2_UART8SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C1_Clock_Source RCCEx I2C1 Clock Source
+ * @{
+ */
+#define RCC_I2C1CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_I2C1CLKSOURCE_SYSCLK RCC_DCKCFGR2_I2C1SEL_0
+#define RCC_I2C1CLKSOURCE_HSI RCC_DCKCFGR2_I2C1SEL_1
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source RCCEx I2C2 Clock Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_DCKCFGR2_I2C2SEL_0
+#define RCC_I2C2CLKSOURCE_HSI RCC_DCKCFGR2_I2C2SEL_1
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C3_Clock_Source RCCEx I2C3 Clock Source
+ * @{
+ */
+#define RCC_I2C3CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_I2C3CLKSOURCE_SYSCLK RCC_DCKCFGR2_I2C3SEL_0
+#define RCC_I2C3CLKSOURCE_HSI RCC_DCKCFGR2_I2C3SEL_1
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C4_Clock_Source RCCEx I2C4 Clock Source
+ * @{
+ */
+#define RCC_I2C4CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_I2C4CLKSOURCE_SYSCLK RCC_DCKCFGR2_I2C4SEL_0
+#define RCC_I2C4CLKSOURCE_HSI RCC_DCKCFGR2_I2C4SEL_1
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_LPTIM1_Clock_Source RCCEx LPTIM1 Clock Source
+ * @{
+ */
+#define RCC_LPTIM1CLKSOURCE_PCLK1 ((uint32_t)0x00000000U)
+#define RCC_LPTIM1CLKSOURCE_LSI RCC_DCKCFGR2_LPTIM1SEL_0
+#define RCC_LPTIM1CLKSOURCE_HSI RCC_DCKCFGR2_LPTIM1SEL_1
+#define RCC_LPTIM1CLKSOURCE_LSE RCC_DCKCFGR2_LPTIM1SEL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CLK48_Clock_Source RCCEx CLK48 Clock Source
+ * @{
+ */
+#define RCC_CLK48SOURCE_PLL ((uint32_t)0x00000000U)
+#define RCC_CLK48SOURCE_PLLSAIP RCC_DCKCFGR2_CK48MSEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM_Prescaler_Selection RCCEx TIM Prescaler Selection
+ * @{
+ */
+#define RCC_TIMPRES_DESACTIVATED ((uint32_t)0x00000000U)
+#define RCC_TIMPRES_ACTIVATED RCC_DCKCFGR1_TIMPRE
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SDMMC1_Clock_Source RCCEx SDMMC1 Clock Source
+ * @{
+ */
+#define RCC_SDMMC1CLKSOURCE_CLK48 ((uint32_t)0x00000000U)
+#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_DCKCFGR2_SDMMC1SEL
+/**
+ * @}
+ */
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/** @defgroup RCCEx_SDMMC2_Clock_Source RCCEx SDMMC2 Clock Source
+ * @{
+ */
+#define RCC_SDMMC2CLKSOURCE_CLK48 ((uint32_t)0x00000000U)
+#define RCC_SDMMC2CLKSOURCE_SYSCLK RCC_DCKCFGR2_SDMMC2SEL
+/**
+ * @}
+ */
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/** @defgroup RCCEx_DFSDM1_Kernel_Clock_Source RCCEx DFSDM1 Kernel Clock Source
+ * @{
+ */
+#define RCC_DFSDM1CLKSOURCE_PCLK2 ((uint32_t)0x00000000U)
+#define RCC_DFSDM1CLKSOURCE_SYSCLK RCC_DCKCFGR1_DFSDM1SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_DFSDM1_AUDIO_Clock_Source RCCEx DFSDM1 AUDIO Clock Source
+ * @{
+ */
+#define RCC_DFSDM1AUDIOCLKSOURCE_SAI1 ((uint32_t)0x00000000U)
+#define RCC_DFSDM1AUDIOCLKSOURCE_SAI2 RCC_DCKCFGR1_ADFSDM1SEL
+/**
+ * @}
+ */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F769xx) || defined (STM32F779xx)
+/** @defgroup RCCEx_DSI_Clock_Source RCC DSI Clock Source
+ * @{
+ */
+#define RCC_DSICLKSOURCE_DSIPHY ((uint32_t)0x00000000U)
+#define RCC_DSICLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR2_DSISEL)
+/**
+ * @}
+ */
+#endif /* STM32F769xx || STM32F779xx */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
+ * @{
+ */
+/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable RCCEx_Peripheral_Clock_Enable_Disable
+ * @brief Enables or disables the AHB/APB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+
+/** @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_DTCMRAMEN_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DTCMRAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DTCMRAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_DMA2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_GPIOJ_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOK_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_DMA2D_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
+#define __HAL_RCC_DTCMRAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DTCMRAMEN))
+#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2EN))
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
+#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOAEN))
+#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOBEN))
+#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN))
+#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN))
+#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_GPIOJ_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOJEN))
+#define __HAL_RCC_GPIOK_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOKEN))
+#define __HAL_RCC_DMA2D_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2DEN))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/**
+ * @brief Enable ETHERNET clock.
+ */
+#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_ETH_CLK_ENABLE() do { \
+ __HAL_RCC_ETHMAC_CLK_ENABLE(); \
+ __HAL_RCC_ETHMACTX_CLK_ENABLE(); \
+ __HAL_RCC_ETHMACRX_CLK_ENABLE(); \
+ } while(0)
+/**
+ * @brief Disable ETHERNET clock.
+ */
+#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
+#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
+#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
+#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
+#define __HAL_RCC_ETH_CLK_DISABLE() do { \
+ __HAL_RCC_ETHMACTX_CLK_DISABLE(); \
+ __HAL_RCC_ETHMACRX_CLK_DISABLE(); \
+ __HAL_RCC_ETHMAC_CLK_DISABLE(); \
+ } while(0)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DCMI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_JPEG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_JPEGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_JPEGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_JPEG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_JPEGEN))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_RNG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN);\
+ UNUSED(tmpreg); \
+ __HAL_RCC_SYSCFG_CLK_ENABLE();\
+ } while(0)
+
+#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
+
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
+#if defined(STM32F756xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CRYP_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_HASH_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
+#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
+#endif /* STM32F756x || STM32F777xx || STM32F779xx */
+
+#if defined(STM32F732xx) || defined (STM32F733xx)
+#define __HAL_RCC_AES_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_AES_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_AESEN))
+#endif /* STM32F732xx || STM32F733xx */
+
+/** @brief Enables or disables the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_FMC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_QSPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN))
+#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN))
+
+/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
+ defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
+ defined (STM32F779xx)
+#define __HAL_RCC_RTC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
+ STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_USART2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_UART4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_UART5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_I2C1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_DAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_UART7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_UART8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SPDIFRX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_I2C4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_CEC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_LPTIM1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_LPTIM1EN))
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
+ defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
+ defined (STM32F779xx)
+#define __HAL_RCC_RTC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_RTCEN))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
+ STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN3EN))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
+#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+#define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN))
+#define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN))
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SPDIFRX_CLK_DISABLE()(RCC->APB1ENR &= ~(RCC_APB1ENR_SPDIFRXEN))
+#define __HAL_RCC_I2C4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C4EN))
+#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_TIM1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_USART1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_USART6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SDMMC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_ADC1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_ADC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_ADC3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SDMMC1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SPI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM9_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM11_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SPI5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SPI6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SAI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_SAI2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F769xx) || defined (STM32F779xx)
+#define __HAL_RCC_DSI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F769xx || STM32F779xx */
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DFSDM1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_MDIO_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_MDIOEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_MDIOEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F723xx) || defined (STM32F733xx)
+#define __HAL_RCC_OTGPHYC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_OTGPHYCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_OTGPHYCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F723xx || STM32F733xx */
+
+#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
+#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
+#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SDMMC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDMMC2EN))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
+#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+#define __HAL_RCC_SDMMC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDMMC1EN))
+#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN))
+#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN))
+#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
+#define __HAL_RCC_SPI6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI6EN))
+#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN))
+#define __HAL_RCC_SAI2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI2EN))
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_LTDCEN))
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F769xx) || defined (STM32F779xx)
+#define __HAL_RCC_DSI_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DSIEN))
+#endif /* STM32F769xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DFSDM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DFSDM1EN))
+#define __HAL_RCC_MDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_MDIOEN))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F723xx) || defined (STM32F733xx)
+#define __HAL_RCC_OTGPHYC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_OTGPHYCEN))
+#endif /* STM32F723xx || STM32F733xx */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable_Status Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB/APB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+
+/** @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET)
+#define __HAL_RCC_DTCMRAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DTCMRAMEN)) != RESET)
+#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2EN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET)
+#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOAEN)) != RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOBEN)) != RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOCEN)) != RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOHEN)) != RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) != RESET)
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_GPIOJ_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) != RESET)
+#define __HAL_RCC_GPIOK_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) != RESET)
+#define __HAL_RCC_DMA2D_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) != RESET)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET)
+#define __HAL_RCC_DTCMRAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DTCMRAMEN)) == RESET)
+#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2EN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) == RESET)
+#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOAEN)) == RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOBEN)) == RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOCEN)) == RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOHEN)) == RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) == RESET)
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_GPIOJ_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) == RESET)
+#define __HAL_RCC_GPIOK_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) == RESET)
+#define __HAL_RCC_DMA2D_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) == RESET)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/**
+ * @brief Enable ETHERNET clock.
+ */
+#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) != RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) != RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) != RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) != RESET)
+#define __HAL_RCC_ETH_IS_CLK_ENABLED() (__HAL_RCC_ETHMAC_IS_CLK_ENABLED() && \
+ __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \
+ __HAL_RCC_ETHMACRX_IS_CLK_ENABLED())
+
+/**
+ * @brief Disable ETHERNET clock.
+ */
+#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) == RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) == RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) == RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) == RESET)
+#define __HAL_RCC_ETH_IS_CLK_DISABLED() (__HAL_RCC_ETHMAC_IS_CLK_DISABLED() && \
+ __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \
+ __HAL_RCC_ETHMACRX_IS_CLK_DISABLED())
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Get the enable or disable status of the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
+
+#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET)
+#define __HAL_RCC_USB_IS_OTG_FS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
+
+#if defined(STM32F756xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) != RESET)
+#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) != RESET)
+#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) == RESET)
+#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) == RESET)
+#endif /* STM32F756xx || STM32F777xx || STM32F779xx */
+
+#if defined(STM32F732xx) || defined (STM32F733xx)
+#define __HAL_RCC_AES_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_AESEN)) != RESET)
+#define __HAL_RCC_AES_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_AESEN)) == RESET)
+#endif /* STM32F732xx || STM32F733xx */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET)
+#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_JPEG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_JPEGEN)) != RESET)
+#define __HAL_RCC_JPEG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_JPEGEN)) == RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Get the enable or disable status of the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) != RESET)
+#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET)
+
+#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) == RESET)
+#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET)
+
+/** @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
+#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
+#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
+#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) != RESET)
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN3EN)) != RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET)
+#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
+#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET)
+#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET)
+#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET)
+#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
+#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET)
+#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
+#define __HAL_RCC_UART7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) != RESET)
+#define __HAL_RCC_UART8_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
+#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
+#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
+#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) == RESET)
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN3EN)) == RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET)
+#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
+#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET)
+#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET)
+#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET)
+#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
+#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
+#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
+#define __HAL_RCC_UART7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) == RESET)
+#define __HAL_RCC_UART8_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) == RESET)
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SPDIFRX_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) != RESET)
+#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET)
+#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET)
+#define __HAL_RCC_I2C4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C4EN)) != RESET)
+
+#define __HAL_RCC_SPDIFRX_IS_CLK_DISABLED()((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) == RESET)
+#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET)
+#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET)
+#define __HAL_RCC_I2C4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C4EN)) == RESET)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
+ defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
+ defined (STM32F779xx)
+#define __HAL_RCC_RTC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCEN)) != RESET)
+#define __HAL_RCC_RTC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCEN)) == RESET)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
+ STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET)
+#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
+#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET)
+#define __HAL_RCC_USART6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) != RESET)
+#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET)
+#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET)
+#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET)
+#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDMMC1EN)) != RESET)
+#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET)
+#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
+#define __HAL_RCC_TIM9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) != RESET)
+#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET)
+#define __HAL_RCC_TIM11_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) != RESET)
+#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET)
+#define __HAL_RCC_SPI6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) != RESET)
+#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET)
+#define __HAL_RCC_SAI2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) != RESET)
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) != RESET)
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F769xx) || defined (STM32F779xx)
+#define __HAL_RCC_DSI_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) != RESET)
+#endif /* STM32F769xx || STM32F779xx */
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SDMMC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDMMC2EN)) != RESET)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DFSDM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) != RESET)
+#define __HAL_RCC_MDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_MDIOEN)) != RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F723xx) || defined (STM32F733xx)
+#define __HAL_RCC_OTGPHYC_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_OTGPHYCEN)) != RESET)
+#endif /* STM32F723xx || STM32F733xx */
+
+#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET)
+#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
+#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET)
+#define __HAL_RCC_USART6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) == RESET)
+#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET)
+#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET)
+#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET)
+#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDMMC1EN)) == RESET)
+#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET)
+#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
+#define __HAL_RCC_TIM9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) == RESET)
+#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
+#define __HAL_RCC_TIM11_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) == RESET)
+#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET)
+#define __HAL_RCC_SPI6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) == RESET)
+#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET)
+#define __HAL_RCC_SAI2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) == RESET)
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) == RESET)
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F769xx) || defined (STM32F779xx)
+#define __HAL_RCC_DSI_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) == RESET)
+#endif /* STM32F769xx || STM32F779xx */
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SDMMC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDMMC2EN)) == RESET)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DFSDM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) == RESET)
+#define __HAL_RCC_MDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_MDIOEN)) == RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F723xx) || defined (STM32F733xx)
+#define __HAL_RCC_OTGPHYC_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_OTGPHYCEN)) == RESET)
+#endif /* STM32F723xx || STM32F733xx */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Force_Release_Peripheral_Reset RCCEx Force Release Peripheral Reset
+ * @brief Forces or releases AHB/APB peripheral reset.
+ * @{
+ */
+
+/** @brief Force or release AHB1 peripheral reset.
+ */
+#define __HAL_RCC_DMA2_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST))
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOCRST))
+#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOHRST))
+#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
+
+#define __HAL_RCC_DMA2_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2RST))
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOCRST))
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOHRST))
+#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DMA2D_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2DRST))
+#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_GPIOJ_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOJRST))
+#define __HAL_RCC_GPIOK_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOKRST))
+
+#define __HAL_RCC_DMA2D_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2DRST))
+#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_GPIOJ_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOJRST))
+#define __HAL_RCC_GPIOK_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOKRST))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Force or release AHB2 peripheral reset.
+ */
+#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
+
+#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
+#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
+
+#if defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_JPEG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_JPEGRST))
+#define __HAL_RCC_JPEG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_JPEGRST))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined(STM32F756xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
+#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
+#endif /* STM32F756xx || STM32F777xx || STM32F779xx */
+
+#if defined(STM32F732xx) || defined (STM32F733xx)
+#define __HAL_RCC_AES_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_AESRST))
+#define __HAL_RCC_AES_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_AESRST))
+#endif /* STM32F732xx || STM32F733xx */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
+#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Force or release AHB3 peripheral reset
+ */
+#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST))
+#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST))
+
+#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
+#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST))
+#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST))
+
+/** @brief Force or release APB1 peripheral reset.
+ */
+#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_LPTIM1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_LPTIM1RST))
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN3RST))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST))
+#define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST))
+
+#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_LPTIM1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_LPTIM1RST))
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN3RST))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST))
+#define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST))
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SPDIFRX_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPDIFRXRST))
+#define __HAL_RCC_I2C4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C4RST))
+#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
+
+#define __HAL_RCC_SPDIFRX_RELEASE_RESET()(RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPDIFRXRST))
+#define __HAL_RCC_I2C4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C4RST))
+#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
+#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
+#define __HAL_RCC_ADC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADCRST))
+#define __HAL_RCC_SDMMC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDMMC1RST))
+#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST))
+#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST))
+#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SPI6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI6RST))
+#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST))
+#define __HAL_RCC_SAI2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI2RST))
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_LTDCRST))
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F723xx) || defined (STM32F733xx)
+#define __HAL_RCC_OTGPHYC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_OTGPHYCRST))
+#endif /* STM32F723xx || STM32F733xx */
+
+#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
+#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
+#define __HAL_RCC_ADC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADCRST))
+#define __HAL_RCC_SDMMC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDMMC1RST))
+#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST))
+#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST))
+#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SPI6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI6RST))
+#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST))
+#define __HAL_RCC_SAI2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI2RST))
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_LTDCRST))
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F723xx) || defined (STM32F733xx)
+#define __HAL_RCC_OTGPHYC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_OTGPHYCRST))
+#endif /* STM32F723xx || STM32F733xx */
+
+#if defined (STM32F769xx) || defined (STM32F779xx)
+#define __HAL_RCC_DSI_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DSIRST))
+#define __HAL_RCC_DSI_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DSIRST))
+#endif /* STM32F769xx || STM32F779xx */
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SDMMC2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDMMC2RST))
+#define __HAL_RCC_SDMMC2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDMMC2RST))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DFSDM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DFSDM1RST))
+#define __HAL_RCC_MDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_MDIORST))
+#define __HAL_RCC_DFSDM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DFSDM1RST))
+#define __HAL_RCC_MDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_MDIORST))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Peripheral_Clock_Sleep_Enable_Disable RCCEx Peripheral Clock Sleep Enable Disable
+ * @brief Enables or disables the AHB/APB peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+
+/** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ */
+#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_AXI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_AXILPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
+#define __HAL_RCC_DTCM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DTCMLPEN))
+#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOALPEN))
+#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOBLPEN))
+#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOCLPEN))
+#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOHLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
+
+#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_AXI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_AXILPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
+#define __HAL_RCC_DTCM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DTCMLPEN))
+#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2LPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOALPEN))
+#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOBLPEN))
+#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOCLPEN))
+#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOHLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2DLPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOJLPEN))
+#define __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOKLPEN))
+
+#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2DLPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOJLPEN))
+#define __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOKLPEN))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
+#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_JPEGLPEN))
+#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_JPEGLPEN))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
+#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
+
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
+
+#if defined(STM32F756xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
+
+#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
+#endif /* STM32F756xx || STM32F777xx || STM32F779xx */
+
+#if defined(STM32F732xx) || defined (STM32F733xx)
+#define __HAL_RCC_AES_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_AESLPEN))
+#define __HAL_RCC_AES_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_AESLPEN))
+#endif /* STM32F732xx || STM32F733xx */
+
+/** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN))
+#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN))
+
+#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN))
+#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN))
+
+/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM5LPEN))
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_LPTIM1LPEN))
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN3LPEN))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI2LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART2LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C1LPEN))
+#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C2LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN))
+#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM5LPEN))
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_LPTIM1LPEN))
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN3LPEN))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI2LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART2LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C1LPEN))
+#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C2LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN))
+#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN))
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
+ defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
+ defined (STM32F779xx)
+#define __HAL_RCC_RTC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_RTCLPEN))
+#define __HAL_RCC_RTC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_RTCLPEN))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
+ STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SPDIFRX_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPDIFRXLPEN))
+#define __HAL_RCC_I2C4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C4LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CECLPEN))
+
+#define __HAL_RCC_SPDIFRX_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPDIFRXLPEN))
+#define __HAL_RCC_I2C4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C4LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CECLPEN))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM1LPEN))
+#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART1LPEN))
+#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART6LPEN))
+#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC1LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDMMC1LPEN))
+#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI1LPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM9LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_TIM11_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM11LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN))
+#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI2LPEN))
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_LTDCLPEN))
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM1LPEN))
+#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART1LPEN))
+#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART6LPEN))
+#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC1LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDMMC1LPEN))
+#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI1LPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM9LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_TIM11_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM11LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN))
+#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI2LPEN))
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_LTDCLPEN))
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F769xx) || defined (STM32F779xx)
+#define __HAL_RCC_DSI_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DSILPEN))
+#define __HAL_RCC_DSI_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DSILPEN))
+#endif /* STM32F769xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DFSDM1LPEN))
+#define __HAL_RCC_MDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_MDIOLPEN))
+#define __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DFSDM1LPEN))
+#define __HAL_RCC_MDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_MDIOLPEN))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SDMMC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDMMC2LPEN))
+#define __HAL_RCC_SDMMC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDMMC2LPEN))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI6LPEN))
+#define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI6LPEN))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Clock_Sleep_Enable_Disable_Status AHB/APB Peripheral Clock Sleep Enable Disable Status
+ * @brief Get the enable or disable status of the AHB/APB peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+
+/** @brief Get the enable or disable status of the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_FLITF_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_FLITFLPEN)) != RESET)
+#define __HAL_RCC_AXI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_AXILPEN)) != RESET)
+#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM1LPEN)) != RESET)
+#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM2LPEN)) != RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_BKPSRAMLPEN)) != RESET)
+#define __HAL_RCC_DTCM_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DTCMLPEN)) != RESET)
+#define __HAL_RCC_DMA2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2LPEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSLPEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSULPILPEN)) != RESET)
+#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOALPEN)) != RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOBLPEN)) != RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOCLPEN)) != RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIODLPEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOELPEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOFLPEN)) != RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOGLPEN)) != RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOHLPEN)) != RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOILPEN)) != RESET)
+
+#define __HAL_RCC_FLITF_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_FLITFLPEN)) == RESET)
+#define __HAL_RCC_AXI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_AXILPEN)) == RESET)
+#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM1LPEN)) == RESET)
+#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM2LPEN)) == RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_BKPSRAMLPEN)) == RESET)
+#define __HAL_RCC_DTCM_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DTCMLPEN)) == RESET)
+#define __HAL_RCC_DMA2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2LPEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSLPEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSULPILPEN)) == RESET)
+#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOALPEN)) == RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOBLPEN)) == RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOCLPEN)) == RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIODLPEN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOELPEN)) == RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOFLPEN)) == RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOGLPEN)) == RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOHLPEN)) == RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOILPEN)) == RESET)
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2DLPEN)) != RESET)
+#define __HAL_RCC_ETHMAC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACLPEN)) != RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACTXLPEN)) != RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACRXLPEN)) != RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACPTPLPEN)) != RESET)
+#define __HAL_RCC_GPIOJ_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOJLPEN)) != RESET)
+#define __HAL_RCC_GPIOK_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOKLPEN)) != RESET)
+
+#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2DLPEN)) == RESET)
+#define __HAL_RCC_ETHMAC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACLPEN)) == RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACTXLPEN)) == RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACRXLPEN)) == RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACPTPLPEN)) == RESET)
+#define __HAL_RCC_GPIOJ_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOJLPEN)) == RESET)
+#define __HAL_RCC_GPIOK_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOKLPEN)) == RESET)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Get the enable or disable status of the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DCMI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DCMILPEN)) != RESET)
+#define __HAL_RCC_DCMI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DCMILPEN)) == RESET)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined(STM32F767xx) || defined(STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_JPEG_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_JPEGLPEN)) != RESET)
+#define __HAL_RCC_JPEG_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_JPEGLPEN)) == RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_RNGLPEN)) != RESET)
+#define __HAL_RCC_RNG_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_RNGLPEN)) == RESET)
+
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_OTGFSLPEN)) != RESET)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_OTGFSLPEN)) == RESET)
+
+#if defined(STM32F756xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CRYP_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_CRYPLPEN)) != RESET)
+#define __HAL_RCC_HASH_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_HASHLPEN)) != RESET)
+
+#define __HAL_RCC_CRYP_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_CRYPLPEN)) == RESET)
+#define __HAL_RCC_HASH_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_HASHLPEN)) == RESET)
+#endif /* STM32F756xx || STM32F777xx || STM32F779xx */
+
+#if defined(STM32F732xx) || defined (STM32F733xx)
+#define __HAL_RCC_AES_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_AESLPEN)) != RESET)
+#define __HAL_RCC_AES_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_AESLPEN)) == RESET)
+#endif /* STM32F732xx || STM32F733xx */
+
+/** @brief Get the enable or disable status of the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_FMC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & (RCC_AHB3LPENR_FMCLPEN)) != RESET)
+#define __HAL_RCC_FMC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & (RCC_AHB3LPENR_FMCLPEN)) == RESET)
+
+#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & (RCC_AHB3LPENR_QSPILPEN)) != RESET)
+#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & (RCC_AHB3LPENR_QSPILPEN)) == RESET)
+
+/** @brief Get the enable or disable status of the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM2LPEN)) != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM3LPEN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM4LPEN)) != RESET)
+#define __HAL_RCC_TIM5_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM5LPEN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM6LPEN)) != RESET)
+#define __HAL_RCC_TIM7_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM7LPEN)) != RESET)
+#define __HAL_RCC_TIM12_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM12LPEN)) != RESET)
+#define __HAL_RCC_TIM13_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM13LPEN)) != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM14LPEN)) != RESET)
+#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_LPTIM1LPEN)) != RESET)
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
+ defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
+ defined (STM32F779xx)
+#define __HAL_RCC_RTC_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_RTCLPEN)) != RESET)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
+ STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN3LPEN)) != RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI2LPEN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI3LPEN)) != RESET)
+#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART2LPEN)) != RESET)
+#define __HAL_RCC_USART3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART3LPEN)) != RESET)
+#define __HAL_RCC_UART4_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART4LPEN)) != RESET)
+#define __HAL_RCC_UART5_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART5LPEN)) != RESET)
+#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C1LPEN)) != RESET)
+#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C2LPEN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C3LPEN)) != RESET)
+#define __HAL_RCC_CAN1_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN1LPEN)) != RESET)
+#define __HAL_RCC_DAC_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_DACLPEN)) != RESET)
+#define __HAL_RCC_UART7_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART7LPEN)) != RESET)
+#define __HAL_RCC_UART8_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART8LPEN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM2LPEN)) == RESET)
+#define __HAL_RCC_TIM3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM3LPEN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM4LPEN)) == RESET)
+#define __HAL_RCC_TIM5_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM5LPEN)) == RESET)
+#define __HAL_RCC_TIM6_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM6LPEN)) == RESET)
+#define __HAL_RCC_TIM7_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM7LPEN)) == RESET)
+#define __HAL_RCC_TIM12_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM12LPEN)) == RESET)
+#define __HAL_RCC_TIM13_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM13LPEN)) == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM14LPEN)) == RESET)
+#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_LPTIM1LPEN)) == RESET)
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
+ defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
+ defined (STM32F779xx)
+#define __HAL_RCC_RTC_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_RTCLPEN)) == RESET)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
+ STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_CAN3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN3LPEN)) == RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define __HAL_RCC_SPI2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI2LPEN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI3LPEN)) == RESET)
+#define __HAL_RCC_USART2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART2LPEN)) == RESET)
+#define __HAL_RCC_USART3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART3LPEN)) == RESET)
+#define __HAL_RCC_UART4_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART4LPEN)) == RESET)
+#define __HAL_RCC_UART5_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART5LPEN)) == RESET)
+#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C1LPEN)) == RESET)
+#define __HAL_RCC_I2C2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C2LPEN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C3LPEN)) == RESET)
+#define __HAL_RCC_CAN1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN1LPEN)) == RESET)
+#define __HAL_RCC_DAC_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_DACLPEN)) == RESET)
+#define __HAL_RCC_UART7_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART7LPEN)) == RESET)
+#define __HAL_RCC_UART8_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART8LPEN)) == RESET)
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SPDIFRX_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPDIFRXLPEN)) != RESET)
+#define __HAL_RCC_I2C4_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C4LPEN)) != RESET)
+#define __HAL_RCC_CAN2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN2LPEN)) != RESET)
+#define __HAL_RCC_CEC_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CECLPEN)) != RESET)
+
+#define __HAL_RCC_SPDIFRX_IS_CLK_SLEEP_DISABLED()((RCC->APB1LPENR & (RCC_APB1LPENR_SPDIFRXLPEN)) == RESET)
+#define __HAL_RCC_I2C4_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C4LPEN)) == RESET)
+#define __HAL_RCC_CAN2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN2LPEN)) == RESET)
+#define __HAL_RCC_CEC_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CECLPEN)) == RESET)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Get the enable or disable status of the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM1LPEN)) != RESET)
+#define __HAL_RCC_TIM8_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM8LPEN)) != RESET)
+#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART1LPEN)) != RESET)
+#define __HAL_RCC_USART6_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART6LPEN)) != RESET)
+#define __HAL_RCC_ADC1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC1LPEN)) != RESET)
+#define __HAL_RCC_ADC2_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC2LPEN)) != RESET)
+#define __HAL_RCC_ADC3_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC3LPEN)) != RESET)
+#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SDMMC1LPEN)) != RESET)
+#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI1LPEN)) != RESET)
+#define __HAL_RCC_SPI4_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI4LPEN)) != RESET)
+#define __HAL_RCC_TIM9_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM9LPEN)) != RESET)
+#define __HAL_RCC_TIM10_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM10LPEN)) != RESET)
+#define __HAL_RCC_TIM11_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM11LPEN)) != RESET)
+#define __HAL_RCC_SPI5_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI5LPEN)) != RESET)
+#define __HAL_RCC_SAI1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI1LPEN)) != RESET)
+#define __HAL_RCC_SAI2_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI2LPEN)) != RESET)
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_LTDCLPEN)) != RESET)
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F769xx) || defined (STM32F779xx)
+#define __HAL_RCC_DSI_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_DSILPEN)) != RESET)
+#endif /* STM32F769xx || STM32F779xx */
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SDMMC2_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SDMMC2LPEN)) != RESET)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_DFSDM1LPEN)) != RESET)
+#define __HAL_RCC_MDIO_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_MDIOLPEN)) != RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#define __HAL_RCC_TIM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM1LPEN)) == RESET)
+#define __HAL_RCC_TIM8_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM8LPEN)) == RESET)
+#define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART1LPEN)) == RESET)
+#define __HAL_RCC_USART6_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART6LPEN)) == RESET)
+#define __HAL_RCC_ADC1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC1LPEN)) == RESET)
+#define __HAL_RCC_ADC2_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC2LPEN)) == RESET)
+#define __HAL_RCC_ADC3_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC3LPEN)) == RESET)
+#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SDMMC1LPEN)) == RESET)
+#define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI1LPEN)) == RESET)
+#define __HAL_RCC_SPI4_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI4LPEN)) == RESET)
+#define __HAL_RCC_TIM9_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM9LPEN)) == RESET)
+#define __HAL_RCC_TIM10_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM10LPEN)) == RESET)
+#define __HAL_RCC_TIM11_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM11LPEN)) == RESET)
+#define __HAL_RCC_SPI5_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI5LPEN)) == RESET)
+#define __HAL_RCC_SAI1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI1LPEN)) == RESET)
+#define __HAL_RCC_SAI2_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI2LPEN)) == RESET)
+#if defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_LTDC_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_LTDCLPEN)) == RESET)
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F769xx) || defined (STM32F779xx)
+#define __HAL_RCC_DSI_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_DSILPEN)) == RESET)
+#endif /* STM32F769xx || STM32F779xx */
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SDMMC2_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SDMMC2LPEN)) == RESET)
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_DFSDM1LPEN)) == RESET)
+#define __HAL_RCC_MDIO_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_MDIOLPEN)) == RESET)
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define __HAL_RCC_SPI6_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI6LPEN)) != RESET)
+#define __HAL_RCC_SPI6_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI6LPEN)) == RESET)
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/*------------------------------- PLL Configuration --------------------------*/
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/** @brief Macro to configure the main PLL clock source, multiplication and division factors.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __RCC_PLLSource__ specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S.
+ * @param __PLLM__ specifies the division factor for PLL VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLL jitter.
+ * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLN parameter correctly to ensure that the VCO
+ * output frequency is between 100 and 432 MHz.
+ * @param __PLLP__ specifies the division factor for main system clock (SYSCLK)
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ * @note You have to set the PLLP parameter correctly to not exceed 216 MHz on
+ * the System clock frequency.
+ * @param __PLLQ__ specifies the division factor for OTG FS, SDMMC and RNG clocks
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @note If the USB OTG FS is used in your application, you have to set the
+ * PLLQ parameter correctly to have 48 MHz clock for the USB. However,
+ * the SDMMC and RNG need a frequency lower than or equal to 48 MHz to work
+ * correctly.
+ * @param __PLLR__ specifies the division factor for DSI clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__) \
+ (RCC->PLLCFGR = ((__RCC_PLLSource__) | (__PLLM__) | \
+ ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \
+ ((((__PLLP__) >> 1) -1) << RCC_PLLCFGR_PLLP_Pos) | \
+ ((__PLLQ__) << RCC_PLLCFGR_PLLQ_Pos) | \
+ ((__PLLR__) << RCC_PLLCFGR_PLLR_Pos)))
+#else
+/** @brief Macro to configure the main PLL clock source, multiplication and division factors.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __RCC_PLLSource__ specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S.
+ * @param __PLLM__ specifies the division factor for PLL VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLL jitter.
+ * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLN parameter correctly to ensure that the VCO
+ * output frequency is between 100 and 432 MHz.
+ * @param __PLLP__ specifies the division factor for main system clock (SYSCLK)
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ * @note You have to set the PLLP parameter correctly to not exceed 216 MHz on
+ * the System clock frequency.
+ * @param __PLLQ__ specifies the division factor for OTG FS, SDMMC and RNG clocks
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @note If the USB OTG FS is used in your application, you have to set the
+ * PLLQ parameter correctly to have 48 MHz clock for the USB. However,
+ * the SDMMC and RNG need a frequency lower than or equal to 48 MHz to work
+ * correctly.
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__) \
+ (RCC->PLLCFGR = (0x20000000 | (__RCC_PLLSource__) | (__PLLM__)| \
+ ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \
+ ((((__PLLP__) >> 1) -1) << RCC_PLLCFGR_PLLP_Pos) | \
+ ((__PLLQ__) << RCC_PLLCFGR_PLLQ_Pos)))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/*---------------------------------------------------------------------------------------------*/
+
+/** @brief Macro to configure the Timers clocks prescalers
+ * @param __PRESC__ specifies the Timers clocks prescalers selection
+ * This parameter can be one of the following values:
+ * @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is
+ * equal to HPRE if PPREx is corresponding to division by 1 or 2,
+ * else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to
+ * division by 4 or more.
+ * @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is
+ * equal to HPRE if PPREx is corresponding to division by 1, 2 or 4,
+ * else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding
+ * to division by 8 or more.
+ */
+#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) do {RCC->DCKCFGR1 &= ~(RCC_DCKCFGR1_TIMPRE);\
+ RCC->DCKCFGR1 |= (__PRESC__); \
+ }while(0)
+
+/** @brief Macros to Enable or Disable the PLLISAI.
+ * @note The PLLSAI is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLLSAI_ENABLE() (RCC->CR |= (RCC_CR_PLLSAION))
+#define __HAL_RCC_PLLSAI_DISABLE() (RCC->CR &= ~(RCC_CR_PLLSAION))
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx)
+/** @brief Macro to configure the PLLSAI clock multiplication and division factors.
+ * @note This function must be used only when the PLLSAI is disabled.
+ * @note PLLSAI clock source is common with the main PLL (configured in
+ * RCC_PLLConfig function )
+ * @param __PLLSAIN__ specifies the multiplication factor for PLLSAI VCO output clock.
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ * @param __PLLSAIP__ specifies the division factor for USB, RNG, SDMMC clocks
+ * This parameter can be a value of @ref RCCEx_PLLSAIP_Clock_Divider.
+ * @param __PLLSAIQ__ specifies the division factor for SAI clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ */
+#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIP__, __PLLSAIQ__) \
+ (RCC->PLLSAICFGR = ((__PLLSAIN__) << RCC_PLLSAICFGR_PLLSAIN_Pos) |\
+ ((__PLLSAIP__) << RCC_PLLSAICFGR_PLLSAIP_Pos) |\
+ ((__PLLSAIQ__) << RCC_PLLSAICFGR_PLLSAIQ_Pos))
+
+/** @brief Macro to configure the PLLI2S clock multiplication and division factors.
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API)
+ * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock.
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ * @param __PLLI2SQ__ specifies the division factor for SAI clock.
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @param __PLLI2SR__ specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ */
+#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) \
+ (RCC->PLLI2SCFGR = ((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\
+ ((__PLLI2SQ__) << RCC_PLLI2SCFGR_PLLI2SQ_Pos) |\
+ ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))
+#else
+/** @brief Macro to configure the PLLSAI clock multiplication and division factors.
+ * @note This function must be used only when the PLLSAI is disabled.
+ * @note PLLSAI clock source is common with the main PLL (configured in
+ * RCC_PLLConfig function )
+ * @param __PLLSAIN__ specifies the multiplication factor for PLLSAI VCO output clock.
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ * @param __PLLSAIP__ specifies the division factor for USB, RNG, SDMMC clocks
+ * This parameter can be a value of @ref RCCEx_PLLSAIP_Clock_Divider.
+ * @param __PLLSAIQ__ specifies the division factor for SAI clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @param __PLLSAIR__ specifies the division factor for LTDC clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ */
+#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) \
+ (RCC->PLLSAICFGR = ((__PLLSAIN__) << RCC_PLLSAICFGR_PLLSAIN_Pos) |\
+ ((__PLLSAIP__) << RCC_PLLSAICFGR_PLLSAIP_Pos) |\
+ ((__PLLSAIQ__) << RCC_PLLSAICFGR_PLLSAIQ_Pos) |\
+ ((__PLLSAIR__) << RCC_PLLSAICFGR_PLLSAIR_Pos))
+
+/** @brief Macro to configure the PLLI2S clock multiplication and division factors.
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API)
+ * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock.
+ * This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+ * @param __PLLI2SP__ specifies the division factor for SPDDIF-RX clock.
+ * This parameter can be a value of @ref RCCEx_PLLI2SP_Clock_Divider.
+ * @param __PLLI2SQ__ specifies the division factor for SAI clock.
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @param __PLLI2SR__ specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ */
+#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SP__, __PLLI2SQ__, __PLLI2SR__) \
+ (RCC->PLLI2SCFGR = ((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\
+ ((__PLLI2SP__) << RCC_PLLI2SCFGR_PLLI2SP_Pos) |\
+ ((__PLLI2SQ__) << RCC_PLLI2SCFGR_PLLI2SQ_Pos) |\
+ ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx */
+
+/** @brief Macro to configure the SAI clock Divider coming from PLLI2S.
+ * @note This function must be called before enabling the PLLI2S.
+ * @param __PLLI2SDivQ__ specifies the PLLI2S division factor for SAI1 clock .
+ * This parameter must be a number between 1 and 32.
+ * SAI1 clock frequency = f(PLLI2SQ) / __PLLI2SDivQ__
+ */
+#define __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(__PLLI2SDivQ__) (MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLI2SDIVQ, (__PLLI2SDivQ__)-1))
+
+/** @brief Macro to configure the SAI clock Divider coming from PLLSAI.
+ * @note This function must be called before enabling the PLLSAI.
+ * @param __PLLSAIDivQ__ specifies the PLLSAI division factor for SAI1 clock .
+ * This parameter must be a number between Min_Data = 1 and Max_Data = 32.
+ * SAI1 clock frequency = f(PLLSAIQ) / __PLLSAIDivQ__
+ */
+#define __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(__PLLSAIDivQ__) (MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLSAIDIVQ, ((__PLLSAIDivQ__)-1)<<8))
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/** @brief Macro to configure the LTDC clock Divider coming from PLLSAI.
+ * @note This function must be called before enabling the PLLSAI.
+ * @param __PLLSAIDivR__ specifies the PLLSAI division factor for LTDC clock .
+ * This parameter can be a value of @ref RCCEx_PLLSAI_DIVR.
+ * LTDC clock frequency = f(PLLSAIR) / __PLLSAIDivR__
+ */
+#define __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(__PLLSAIDivR__)\
+ MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLSAIDIVR, (uint32_t)(__PLLSAIDivR__))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/** @brief Macro to configure SAI1 clock source selection.
+ * @note This function must be called before enabling PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__ specifies the SAI1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+ * as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+ * as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin
+ * used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock
+ * used as SAI1 clock.
+ * @note The RCC_SAI1CLKSOURCE_PLLSRC value is only available with STM32F767/769/777/779xx Devices
+ */
+#define __HAL_RCC_SAI1_CONFIG(__SOURCE__)\
+ MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI1SEL, (uint32_t)(__SOURCE__))
+
+/** @brief Macro to get the SAI1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+ * as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+ * as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin
+ * used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock
+ * used as SAI1 clock.
+ * @note The RCC_SAI1CLKSOURCE_PLLSRC value is only available with STM32F767/769/777/779xx Devices
+ */
+#define __HAL_RCC_GET_SAI1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI1SEL)))
+
+
+/** @brief Macro to configure SAI2 clock source selection.
+ * @note This function must be called before enabling PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__ specifies the SAI2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+ * as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+ * as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin
+ * used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock
+ * used as SAI2 clock.
+ * @note The RCC_SAI2CLKSOURCE_PLLSRC value is only available with STM32F767/769/777/779xx Devices
+ */
+#define __HAL_RCC_SAI2_CONFIG(__SOURCE__)\
+ MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI2SEL, (uint32_t)(__SOURCE__))
+
+
+/** @brief Macro to get the SAI2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+ * as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+ * as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin
+ * used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock
+ * used as SAI2 clock.
+ * @note The RCC_SAI2CLKSOURCE_PLLSRC value is only available with STM32F767/769/777/779xx Devices
+ */
+#define __HAL_RCC_GET_SAI2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI2SEL)))
+
+
+/** @brief Enable PLLSAI_RDY interrupt.
+ */
+#define __HAL_RCC_PLLSAI_ENABLE_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Disable PLLSAI_RDY interrupt.
+ */
+#define __HAL_RCC_PLLSAI_DISABLE_IT() (RCC->CIR &= ~(RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Clear the PLLSAI RDY interrupt pending bits.
+ */
+#define __HAL_RCC_PLLSAI_CLEAR_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYF))
+
+/** @brief Check the PLLSAI RDY interrupt has occurred or not.
+ * @retval The new state (TRUE or FALSE).
+ */
+#define __HAL_RCC_PLLSAI_GET_IT() ((RCC->CIR & (RCC_CIR_PLLSAIRDYIE)) == (RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Check PLLSAI RDY flag is set or not.
+ * @retval The new state (TRUE or FALSE).
+ */
+#define __HAL_RCC_PLLSAI_GET_FLAG() ((RCC->CR & (RCC_CR_PLLSAIRDY)) == (RCC_CR_PLLSAIRDY))
+
+/** @brief Macro to Get I2S clock source selection.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S clock source
+ */
+#define __HAL_RCC_GET_I2SCLKSOURCE() (READ_BIT(RCC->CFGR, RCC_CFGR_I2SSRC))
+
+/** @brief Macro to configure the I2C1 clock (I2C1CLK).
+ *
+ * @param __I2C1_CLKSOURCE__ specifies the I2C1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C1CLKSOURCE_PCLK1: PCLK1 selected as I2C1 clock
+ * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
+ * @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_I2C1_CONFIG(__I2C1_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C1SEL, (uint32_t)(__I2C1_CLKSOURCE__))
+
+/** @brief Macro to get the I2C1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C1CLKSOURCE_PCLK1: PCLK1 selected as I2C1 clock
+ * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
+ * @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C1SEL)))
+
+/** @brief Macro to configure the I2C2 clock (I2C2CLK).
+ *
+ * @param __I2C2_CLKSOURCE__ specifies the I2C2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_PCLK1: PCLK1 selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_I2C2_CONFIG(__I2C2_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C2SEL, (uint32_t)(__I2C2_CLKSOURCE__))
+
+/** @brief Macro to get the I2C2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_PCLK1: PCLK1 selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C2SEL)))
+
+/** @brief Macro to configure the I2C3 clock (I2C3CLK).
+ *
+ * @param __I2C3_CLKSOURCE__ specifies the I2C3 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C3CLKSOURCE_PCLK1: PCLK1 selected as I2C3 clock
+ * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock
+ * @arg RCC_I2C3CLKSOURCE_SYSCLK: System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_I2C3_CONFIG(__I2C3_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C3SEL, (uint32_t)(__I2C3_CLKSOURCE__))
+
+/** @brief macro to get the I2C3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C3CLKSOURCE_PCLK1: PCLK1 selected as I2C3 clock
+ * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock
+ * @arg RCC_I2C3CLKSOURCE_SYSCLK: System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_GET_I2C3_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C3SEL)))
+
+/** @brief Macro to configure the I2C4 clock (I2C4CLK).
+ *
+ * @param __I2C4_CLKSOURCE__ specifies the I2C4 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C4CLKSOURCE_PCLK1: PCLK1 selected as I2C4 clock
+ * @arg RCC_I2C4CLKSOURCE_HSI: HSI selected as I2C4 clock
+ * @arg RCC_I2C4CLKSOURCE_SYSCLK: System Clock selected as I2C4 clock
+ */
+#define __HAL_RCC_I2C4_CONFIG(__I2C4_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C4SEL, (uint32_t)(__I2C4_CLKSOURCE__))
+
+/** @brief macro to get the I2C4 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C4CLKSOURCE_PCLK1: PCLK1 selected as I2C4 clock
+ * @arg RCC_I2C4CLKSOURCE_HSI: HSI selected as I2C4 clock
+ * @arg RCC_I2C4CLKSOURCE_SYSCLK: System Clock selected as I2C4 clock
+ */
+#define __HAL_RCC_GET_I2C4_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C4SEL)))
+
+/** @brief Macro to configure the USART1 clock (USART1CLK).
+ *
+ * @param __USART1_CLKSOURCE__ specifies the USART1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART1CLKSOURCE_PCLK2: PCLK2 selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
+ */
+#define __HAL_RCC_USART1_CONFIG(__USART1_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART1SEL, (uint32_t)(__USART1_CLKSOURCE__))
+
+/** @brief macro to get the USART1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART1CLKSOURCE_PCLK2: PCLK2 selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
+ */
+#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART1SEL)))
+
+/** @brief Macro to configure the USART2 clock (USART2CLK).
+ *
+ * @param __USART2_CLKSOURCE__ specifies the USART2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+ */
+#define __HAL_RCC_USART2_CONFIG(__USART2_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART2SEL, (uint32_t)(__USART2_CLKSOURCE__))
+
+/** @brief macro to get the USART2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+ */
+#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART2SEL)))
+
+/** @brief Macro to configure the USART3 clock (USART3CLK).
+ *
+ * @param __USART3_CLKSOURCE__ specifies the USART3 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART3CLKSOURCE_PCLK1: PCLK1 selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_SYSCLK: System Clock selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock
+ */
+#define __HAL_RCC_USART3_CONFIG(__USART3_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART3SEL, (uint32_t)(__USART3_CLKSOURCE__))
+
+/** @brief macro to get the USART3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART3CLKSOURCE_PCLK1: PCLK1 selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_SYSCLK: System Clock selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock
+ */
+#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART3SEL)))
+
+ /** @brief Macro to configure the UART4 clock (UART4CLK).
+ *
+ * @param __UART4_CLKSOURCE__ specifies the UART4 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_UART4CLKSOURCE_PCLK1: PCLK1 selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_SYSCLK: System Clock selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock
+ */
+#define __HAL_RCC_UART4_CONFIG(__UART4_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART4SEL, (uint32_t)(__UART4_CLKSOURCE__))
+
+/** @brief macro to get the UART4 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_UART4CLKSOURCE_PCLK1: PCLK1 selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_SYSCLK: System Clock selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock
+ */
+#define __HAL_RCC_GET_UART4_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART4SEL)))
+
+ /** @brief Macro to configure the UART5 clock (UART5CLK).
+ *
+ * @param __UART5_CLKSOURCE__ specifies the UART5 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_UART5CLKSOURCE_PCLK1: PCLK1 selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_SYSCLK: System Clock selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock
+ */
+#define __HAL_RCC_UART5_CONFIG(__UART5_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART5SEL, (uint32_t)(__UART5_CLKSOURCE__))
+
+/** @brief macro to get the UART5 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_UART5CLKSOURCE_PCLK1: PCLK1 selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_SYSCLK: System Clock selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock
+ */
+#define __HAL_RCC_GET_UART5_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART5SEL)))
+
+ /** @brief Macro to configure the USART6 clock (USART6CLK).
+ *
+ * @param __USART6_CLKSOURCE__ specifies the USART6 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART6CLKSOURCE_PCLK1: PCLK1 selected as USART6 clock
+ * @arg RCC_USART6CLKSOURCE_HSI: HSI selected as USART6 clock
+ * @arg RCC_USART6CLKSOURCE_SYSCLK: System Clock selected as USART6 clock
+ * @arg RCC_USART6CLKSOURCE_LSE: LSE selected as USART6 clock
+ */
+#define __HAL_RCC_USART6_CONFIG(__USART6_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART6SEL, (uint32_t)(__USART6_CLKSOURCE__))
+
+/** @brief macro to get the USART6 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART6CLKSOURCE_PCLK1: PCLK1 selected as USART6 clock
+ * @arg RCC_USART6CLKSOURCE_HSI: HSI selected as USART6 clock
+ * @arg RCC_USART6CLKSOURCE_SYSCLK: System Clock selected as USART6 clock
+ * @arg RCC_USART6CLKSOURCE_LSE: LSE selected as USART6 clock
+ */
+#define __HAL_RCC_GET_USART6_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART6SEL)))
+
+ /** @brief Macro to configure the UART7 clock (UART7CLK).
+ *
+ * @param __UART7_CLKSOURCE__ specifies the UART7 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_UART7CLKSOURCE_PCLK1: PCLK1 selected as UART7 clock
+ * @arg RCC_UART7CLKSOURCE_HSI: HSI selected as UART7 clock
+ * @arg RCC_UART7CLKSOURCE_SYSCLK: System Clock selected as UART7 clock
+ * @arg RCC_UART7CLKSOURCE_LSE: LSE selected as UART7 clock
+ */
+#define __HAL_RCC_UART7_CONFIG(__UART7_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART7SEL, (uint32_t)(__UART7_CLKSOURCE__))
+
+/** @brief macro to get the UART7 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_UART7CLKSOURCE_PCLK1: PCLK1 selected as UART7 clock
+ * @arg RCC_UART7CLKSOURCE_HSI: HSI selected as UART7 clock
+ * @arg RCC_UART7CLKSOURCE_SYSCLK: System Clock selected as UART7 clock
+ * @arg RCC_UART7CLKSOURCE_LSE: LSE selected as UART7 clock
+ */
+#define __HAL_RCC_GET_UART7_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART7SEL)))
+
+/** @brief Macro to configure the UART8 clock (UART8CLK).
+ *
+ * @param __UART8_CLKSOURCE__ specifies the UART8 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_UART8CLKSOURCE_PCLK1: PCLK1 selected as UART8 clock
+ * @arg RCC_UART8CLKSOURCE_HSI: HSI selected as UART8 clock
+ * @arg RCC_UART8CLKSOURCE_SYSCLK: System Clock selected as UART8 clock
+ * @arg RCC_UART8CLKSOURCE_LSE: LSE selected as UART8 clock
+ */
+#define __HAL_RCC_UART8_CONFIG(__UART8_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART8SEL, (uint32_t)(__UART8_CLKSOURCE__))
+
+/** @brief macro to get the UART8 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_UART8CLKSOURCE_PCLK1: PCLK1 selected as UART8 clock
+ * @arg RCC_UART8CLKSOURCE_HSI: HSI selected as UART8 clock
+ * @arg RCC_UART8CLKSOURCE_SYSCLK: System Clock selected as UART8 clock
+ * @arg RCC_UART8CLKSOURCE_LSE: LSE selected as UART8 clock
+ */
+#define __HAL_RCC_GET_UART8_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART8SEL)))
+
+/** @brief Macro to configure the LPTIM1 clock (LPTIM1CLK).
+ *
+ * @param __LPTIM1_CLKSOURCE__ specifies the LPTIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock
+ */
+#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, (uint32_t)(__LPTIM1_CLKSOURCE__))
+
+/** @brief macro to get the LPTIM1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock
+ * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock
+ */
+#define __HAL_RCC_GET_LPTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL)))
+
+/** @brief Macro to configure the CEC clock (CECCLK).
+ *
+ * @param __CEC_CLKSOURCE__ specifies the CEC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_HSI: HSI divided by 488 selected as CEC clock
+ */
+#define __HAL_RCC_CEC_CONFIG(__CEC_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, (uint32_t)(__CEC_CLKSOURCE__))
+
+/** @brief macro to get the CEC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
+ */
+#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL)))
+
+/** @brief Macro to configure the CLK48 source (CLK48CLK).
+ *
+ * @param __CLK48_SOURCE__ specifies the CLK48 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CLK48SOURCE_PLL: PLL selected as CLK48 source
+ * @arg RCC_CLK48SOURCE_PLLSAIP: PLLSAIP selected as CLK48 source
+ */
+#define __HAL_RCC_CLK48_CONFIG(__CLK48_SOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__CLK48_SOURCE__))
+
+/** @brief macro to get the CLK48 source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_CLK48SOURCE_PLL: PLL used as CLK48 source
+ * @arg RCC_CLK48SOURCE_PLLSAIP: PLLSAIP used as CLK48 source
+ */
+#define __HAL_RCC_GET_CLK48_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL)))
+
+/** @brief Macro to configure the SDMMC1 clock (SDMMC1CLK).
+ *
+ * @param __SDMMC1_CLKSOURCE__ specifies the SDMMC1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SDMMC1CLKSOURCE_CLK48: CLK48 selected as SDMMC clock
+ * @arg RCC_SDMMC1CLKSOURCE_SYSCLK: SYSCLK selected as SDMMC clock
+ */
+#define __HAL_RCC_SDMMC1_CONFIG(__SDMMC1_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDMMC1SEL, (uint32_t)(__SDMMC1_CLKSOURCE__))
+
+/** @brief macro to get the SDMMC1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SDMMC1CLKSOURCE_CLK48: CLK48 selected as SDMMC1 clock
+ * @arg RCC_SDMMC1CLKSOURCE_SYSCLK: SYSCLK selected as SDMMC1 clock
+ */
+#define __HAL_RCC_GET_SDMMC1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDMMC1SEL)))
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/** @brief Macro to configure the SDMMC2 clock (SDMMC2CLK).
+ * @param __SDMMC2_CLKSOURCE__ specifies the SDMMC2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SDMMC2CLKSOURCE_CLK48: CLK48 selected as SDMMC2 clock
+ * @arg RCC_SDMMC2CLKSOURCE_SYSCLK: SYSCLK selected as SDMMC2 clock
+ */
+#define __HAL_RCC_SDMMC2_CONFIG(__SDMMC2_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDMMC2SEL, (uint32_t)(__SDMMC2_CLKSOURCE__))
+
+/** @brief macro to get the SDMMC2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SDMMC2CLKSOURCE_CLK48: CLK48 selected as SDMMC2 clock
+ * @arg RCC_SDMMC2CLKSOURCE_SYSCLK: SYSCLK selected as SDMMC2 clock
+ */
+#define __HAL_RCC_GET_SDMMC2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDMMC2SEL)))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/** @brief Macro to configure the DFSDM1 clock
+ * @param __DFSDM1_CLKSOURCE__ specifies the DFSDM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_DFSDM1CLKSOURCE_PCLK2: PCLK2 Clock selected as DFSDM clock
+ * @arg RCC_DFSDMCLKSOURCE_SYSCLK: System Clock selected as DFSDM clock
+ */
+#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_DFSDM1SEL, (uint32_t)(__DFSDM1_CLKSOURCE__))
+
+/** @brief Macro to get the DFSDM1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_DFSDM1CLKSOURCE_PCLK2: PCLK2 Clock selected as DFSDM1 clock
+ * @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System Clock selected as DFSDM1 clock
+ */
+#define __HAL_RCC_GET_DFSDM1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_DFSDM1SEL)))
+
+/** @brief Macro to configure the DFSDM1 Audio clock
+ * @param __DFSDM1AUDIO_CLKSOURCE__ specifies the DFSDM1 Audio clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_DFSDM1AUDIOCLKSOURCE_SAI1: SAI1 Clock selected as DFSDM1 Audio clock
+ * @arg RCC_DFSDM1AUDIOCLKSOURCE_SAI2: SAI2 Clock selected as DFSDM1 Audio clock
+ */
+#define __HAL_RCC_DFSDM1AUDIO_CONFIG(__DFSDM1AUDIO_CLKSOURCE__) \
+ MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_ADFSDM1SEL, (uint32_t)(__DFSDM1AUDIO_CLKSOURCE__))
+
+/** @brief Macro to get the DFSDM1 Audio clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_DFSDM1AUDIOCLKSOURCE_SAI1: SAI1 Clock selected as DFSDM1 Audio clock
+ * @arg RCC_DFSDM1AUDIOCLKSOURCE_SAI2: SAI2 Clock selected as DFSDM1 Audio clock
+ */
+#define __HAL_RCC_GET_DFSDM1AUDIO_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_ADFSDM1SEL)))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F769xx) || defined (STM32F779xx)
+/** @brief Macro to configure the DSI clock.
+ * @param __DSI_CLKSOURCE__ specifies the DSI clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock.
+ * @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock.
+ */
+#define __HAL_RCC_DSI_CONFIG(__DSI_CLKSOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_DSISEL, (uint32_t)(__DSI_CLKSOURCE__)))
+
+/** @brief Macro to Get the DSI clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock.
+ * @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock.
+ */
+#define __HAL_RCC_GET_DSI_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_DSISEL))
+#endif /* STM32F769xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCCEx_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk);
+HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit);
+HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void);
+HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI(RCC_PLLSAIInitTypeDef *PLLSAIInit);
+HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI(void);
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup RCCEx_Private_Macros RCCEx Private Macros
+ * @{
+ */
+/** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters
+ * @{
+ */
+#if defined(STM32F756xx) || defined(STM32F746xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) \
+ ((((SELECTION) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || \
+ (((SELECTION) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) || \
+ (((SELECTION) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \
+ (((SELECTION) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \
+ (((SELECTION) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) || \
+ (((SELECTION) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \
+ (((SELECTION) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) || \
+ (((SELECTION) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC))
+#elif defined(STM32F745xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) \
+ ((((SELECTION) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || \
+ (((SELECTION) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \
+ (((SELECTION) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \
+ (((SELECTION) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) || \
+ (((SELECTION) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \
+ (((SELECTION) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) || \
+ (((SELECTION) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC))
+#elif defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) \
+ ((((SELECTION) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || \
+ (((SELECTION) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) || \
+ (((SELECTION) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \
+ (((SELECTION) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \
+ (((SELECTION) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) || \
+ (((SELECTION) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \
+ (((SELECTION) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SDMMC2) == RCC_PERIPHCLK_SDMMC2) || \
+ (((SELECTION) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) || \
+ (((SELECTION) & RCC_PERIPHCLK_DFSDM1_AUDIO) == RCC_PERIPHCLK_DFSDM1_AUDIO) || \
+ (((SELECTION) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) || \
+ (((SELECTION) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC))
+#elif defined (STM32F765xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) \
+ ((((SELECTION) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || \
+ (((SELECTION) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \
+ (((SELECTION) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \
+ (((SELECTION) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) || \
+ (((SELECTION) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \
+ (((SELECTION) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SDMMC2) == RCC_PERIPHCLK_SDMMC2) || \
+ (((SELECTION) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) || \
+ (((SELECTION) & RCC_PERIPHCLK_DFSDM1_AUDIO) == RCC_PERIPHCLK_DFSDM1_AUDIO) || \
+ (((SELECTION) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) || \
+ (((SELECTION) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC))
+#elif defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) \
+ ((((SELECTION) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || \
+ (((SELECTION) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \
+ (((SELECTION) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7) || \
+ (((SELECTION) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((SELECTION) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((SELECTION) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \
+ (((SELECTION) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) || \
+ (((SELECTION) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \
+ (((SELECTION) & RCC_PERIPHCLK_SDMMC2) == RCC_PERIPHCLK_SDMMC2) || \
+ (((SELECTION) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC))
+#endif /* STM32F746xx || STM32F756xx */
+#define IS_RCC_PLLI2SN_VALUE(VALUE) ((50 <= (VALUE)) && ((VALUE) <= 432))
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || defined (STM32F767xx) || \
+ defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define IS_RCC_PLLI2SP_VALUE(VALUE) (((VALUE) == RCC_PLLI2SP_DIV2) ||\
+ ((VALUE) == RCC_PLLI2SP_DIV4) ||\
+ ((VALUE) == RCC_PLLI2SP_DIV6) ||\
+ ((VALUE) == RCC_PLLI2SP_DIV8))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
+#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
+
+#define IS_RCC_PLLSAIN_VALUE(VALUE) ((50 <= (VALUE)) && ((VALUE) <= 432))
+#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV4) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV6) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV8))
+#define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
+#define IS_RCC_PLLSAIR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
+
+#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
+
+#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
+
+#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDIVR_2) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_4) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_8) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_16))
+#define IS_RCC_I2SCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SCLKSOURCE_PLLI2S) || \
+ ((SOURCE) == RCC_I2SCLKSOURCE_EXT))
+
+#define IS_RCC_SDMMC1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SDMMC1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_SDMMC1CLKSOURCE_CLK48))
+
+#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_CECCLKSOURCE_LSE))
+#define IS_RCC_USART1CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+
+#define IS_RCC_USART2CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_USART2CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_HSI))
+#define IS_RCC_USART3CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_USART3CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_HSI))
+
+#define IS_RCC_UART4CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_UART4CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_HSI))
+
+#define IS_RCC_UART5CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_UART5CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_HSI))
+
+#define IS_RCC_USART6CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_USART6CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART6CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART6CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART6CLKSOURCE_HSI))
+
+#define IS_RCC_UART7CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_UART7CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART7CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART7CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART7CLKSOURCE_HSI))
+
+#define IS_RCC_UART8CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_UART8CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART8CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART8CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART8CLKSOURCE_HSI))
+#define IS_RCC_I2C1CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_I2C1CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_I2C1CLKSOURCE_SYSCLK)|| \
+ ((SOURCE) == RCC_I2C1CLKSOURCE_HSI))
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_I2C2CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK)|| \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_HSI))
+
+#define IS_RCC_I2C3CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_I2C3CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_I2C3CLKSOURCE_SYSCLK)|| \
+ ((SOURCE) == RCC_I2C3CLKSOURCE_HSI))
+#define IS_RCC_I2C4CLKSOURCE(SOURCE) \
+ (((SOURCE) == RCC_I2C4CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_I2C4CLKSOURCE_SYSCLK)|| \
+ ((SOURCE) == RCC_I2C4CLKSOURCE_HSI))
+#define IS_RCC_LPTIM1CLK(SOURCE) \
+ (((SOURCE) == RCC_LPTIM1CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSI) || \
+ ((SOURCE) == RCC_LPTIM1CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSE))
+#define IS_RCC_CLK48SOURCE(SOURCE) \
+ (((SOURCE) == RCC_CLK48SOURCE_PLLSAIP) || \
+ ((SOURCE) == RCC_CLK48SOURCE_PLL))
+#define IS_RCC_TIMPRES(VALUE) \
+ (((VALUE) == RCC_TIMPRES_DESACTIVATED) || \
+ ((VALUE) == RCC_TIMPRES_ACTIVATED))
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F745xx) ||\
+ defined (STM32F746xx) || defined (STM32F756xx)
+#define IS_RCC_SAI1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI1CLKSOURCE_PLLSAI) || \
+ ((SOURCE) == RCC_SAI1CLKSOURCE_PLLI2S) || \
+ ((SOURCE) == RCC_SAI1CLKSOURCE_PIN))
+#define IS_RCC_SAI2CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI2CLKSOURCE_PLLSAI) || \
+ ((SOURCE) == RCC_SAI2CLKSOURCE_PLLI2S) || \
+ ((SOURCE) == RCC_SAI2CLKSOURCE_PIN))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F745xx || STM32F746xx || STM32F756xx */
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define IS_RCC_PLLR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
+
+#define IS_RCC_SAI1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI1CLKSOURCE_PLLSAI) || \
+ ((SOURCE) == RCC_SAI1CLKSOURCE_PLLI2S) || \
+ ((SOURCE) == RCC_SAI1CLKSOURCE_PIN) || \
+ ((SOURCE) == RCC_SAI1CLKSOURCE_PLLSRC))
+
+#define IS_RCC_SAI2CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI2CLKSOURCE_PLLSAI) || \
+ ((SOURCE) == RCC_SAI2CLKSOURCE_PLLI2S) || \
+ ((SOURCE) == RCC_SAI2CLKSOURCE_PIN) || \
+ ((SOURCE) == RCC_SAI2CLKSOURCE_PLLSRC))
+
+#define IS_RCC_DFSDM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_DFSDM1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_DFSDM1CLKSOURCE_SYSCLK))
+
+#define IS_RCC_DFSDM1AUDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_DFSDM1AUDIOCLKSOURCE_SAI1) || \
+ ((SOURCE) == RCC_DFSDM1AUDIOCLKSOURCE_SAI2))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F765xx) ||\
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define IS_RCC_SDMMC2CLKSOURCE(SOURCE) (((SOURCE) == RCC_SDMMC2CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_SDMMC2CLKSOURCE_CLK48))
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+#define IS_RCC_DSIBYTELANECLKSOURCE(SOURCE) (((SOURCE) == RCC_DSICLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_DSICLKSOURCE_DSIPHY))
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h
new file mode 100644
index 00000000..74255a4e
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h
@@ -0,0 +1,1806 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_tim.h
+ * @author MCD Application Team
+ * @brief Header file of TIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_TIM_H
+#define __STM32F7xx_HAL_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIM
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Types TIM Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Time base Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_Counter_Mode */
+
+ uint32_t Period; /*!< Specifies the period value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_ClockDivision */
+
+ uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR down-counter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload.
+ This parameter can be a value of @ref TIM_AutoReloadPreload */
+
+} TIM_Base_InitTypeDef;
+
+/**
+ * @brief TIM Output Compare Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIMEx_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCFastMode; /*!< Specifies the Fast mode state.
+ This parameter can be a value of @ref TIM_Output_Fast_State
+ @note This parameter is valid only in PWM1 and PWM2 mode. */
+
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OC_InitTypeDef;
+
+/**
+ * @brief TIM One Pulse Mode Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIMEx_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_OnePulse_InitTypeDef;
+
+
+/**
+ * @brief TIM Input Capture Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_IC_InitTypeDef;
+
+/**
+ * @brief TIM Encoder Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t EncoderMode; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Encoder_Mode */
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC2Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC2Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_Encoder_InitTypeDef;
+
+/**
+ * @brief Clock Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSource; /*!< TIM clock sources.
+ This parameter can be a value of @ref TIM_Clock_Source */
+ uint32_t ClockPolarity; /*!< TIM clock polarity.
+ This parameter can be a value of @ref TIM_Clock_Polarity */
+ uint32_t ClockPrescaler; /*!< TIM clock prescaler.
+ This parameter can be a value of @ref TIM_Clock_Prescaler */
+ uint32_t ClockFilter; /*!< TIM clock filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+}TIM_ClockConfigTypeDef;
+
+/**
+ * @brief Clear Input Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClearInputState; /*!< TIM clear Input state.
+ This parameter can be ENABLE or DISABLE */
+ uint32_t ClearInputSource; /*!< TIM clear Input sources.
+ This parameter can be a value of @ref TIMEx_ClearInput_Source */
+ uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity.
+ This parameter can be a value of @ref TIM_ClearInput_Polarity */
+ uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler.
+ This parameter can be a value of @ref TIM_ClearInput_Prescaler */
+ uint32_t ClearInputFilter; /*!< TIM Clear Input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+}TIM_ClearInputConfigTypeDef;
+
+/**
+ * @brief TIM Slave configuration Structure definition
+ */
+typedef struct {
+ uint32_t SlaveMode; /*!< Slave mode selection
+ This parameter can be a value of @ref TIMEx_Slave_Mode */
+ uint32_t InputTrigger; /*!< Input Trigger source
+ This parameter can be a value of @ref TIM_Trigger_Selection */
+ uint32_t TriggerPolarity; /*!< Input Trigger polarity
+ This parameter can be a value of @ref TIM_Trigger_Polarity */
+ uint32_t TriggerPrescaler; /*!< Input trigger prescaler
+ This parameter can be a value of @ref TIM_Trigger_Prescaler */
+ uint32_t TriggerFilter; /*!< Input trigger filter
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+}TIM_SlaveConfigTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */
+ HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */
+ HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
+ HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */
+}HAL_TIM_StateTypeDef;
+
+/**
+ * @brief HAL Active channel structures definition
+ */
+typedef enum
+{
+ HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */
+ HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */
+ HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */
+ HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */
+ HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */
+}HAL_TIM_ActiveChannel;
+
+/**
+ * @brief TIM Time Base Handle Structure definition
+ */
+typedef struct __TIM_HandleTypeDef
+{
+ TIM_TypeDef *Instance; /*!< Register base address */
+ TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
+ HAL_TIM_ActiveChannel Channel; /*!< Active channel */
+ DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
+ This array is accessed by a @ref DMA_Handle_index */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ void (* Base_MspInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */
+ void (* Base_MspDeInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */
+ void (* IC_MspInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */
+ void (* IC_MspDeInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */
+ void (* OC_MspInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */
+ void (* OC_MspDeInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */
+ void (* PWM_MspInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */
+ void (* PWM_MspDeInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */
+ void (* OnePulse_MspInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */
+ void (* OnePulse_MspDeInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */
+ void (* Encoder_MspInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */
+ void (* Encoder_MspDeInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */
+ void (* HallSensor_MspInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */
+ void (* HallSensor_MspDeInitCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */
+
+ void (* PeriodElapsedCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */
+ void (* TriggerCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */
+ void (* IC_CaptureCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */
+ void (* OC_DelayElapsedCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */
+ void (* PWM_PulseFinishedCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */
+ void (* ErrorCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */
+ void (* CommutationCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */
+ void (* BreakCallback) (struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */
+
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+}TIM_HandleTypeDef;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+/**
+ * @brief HAL TIM Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U, /*!< TIM Base MspInit Callback ID */
+ HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U, /*!< TIM Base MspDeInit Callback ID */
+ HAL_TIM_IC_MSPINIT_CB_ID = 0x02U, /*!< TIM IC MspInit Callback ID */
+ HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U, /*!< TIM IC MspDeInit Callback ID */
+ HAL_TIM_OC_MSPINIT_CB_ID = 0x04U, /*!< TIM OC MspInit Callback ID */
+ HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U, /*!< TIM OC MspDeInit Callback ID */
+ HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U, /*!< TIM PWM MspInit Callback ID */
+ HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U, /*!< TIM PWM MspDeInit Callback ID */
+ HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U, /*!< TIM One Pulse MspInit Callback ID */
+ HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U, /*!< TIM One Pulse MspDeInit Callback ID */
+ HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU, /*!< TIM Encoder MspInit Callback ID */
+ HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU, /*!< TIM Encoder MspDeInit Callback ID */
+ HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU, /*!< TIM Encoder MspDeInit Callback ID */
+ HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU, /*!< TIM Encoder MspDeInit Callback ID */
+
+ HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU, /*!< TIM Period Elapsed Callback ID */
+ HAL_TIM_TRIGGER_CB_ID = 0x0FU, /*!< TIM Trigger Callback ID */
+ HAL_TIM_IC_CAPTURE_CB_ID = 0x10U, /*!< TIM Input Capture Callback ID */
+ HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x11U, /*!< TIM Output Compare Delay Elapsed Callback ID */
+ HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x12U, /*!< TIM PWM Pulse Finished Callback ID */
+ HAL_TIM_ERROR_CB_ID = 0x13U, /*!< TIM Error Callback ID */
+ HAL_TIM_COMMUTATION_CB_ID = 0x14U, /*!< TIM Commutation Callback ID */
+ HAL_TIM_BREAK_CB_ID = 0x15U /*!< TIM Break Callback ID */
+
+}HAL_TIM_CallbackIDTypeDef;
+
+/**
+ * @brief HAL TIM Callback pointer definition
+ */
+typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef * htim); /*!< pointer to the TIM callback function */
+
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Constants TIM Exported Constants
+ * @{
+ */
+
+/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel Polarity
+ * @{
+ */
+#define TIM_INPUTCHANNELPOLARITY_RISING ((uint32_t)0x00000000U) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_FALLING (TIM_CCER_CC1P) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Polarity TIM ETR Polarity
+ * @{
+ */
+#define TIM_ETRPOLARITY_INVERTED (TIM_SMCR_ETP) /*!< Polarity for ETR source */
+#define TIM_ETRPOLARITY_NONINVERTED ((uint32_t)0x0000U) /*!< Polarity for ETR source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler
+ * @{
+ */
+#define TIM_ETRPRESCALER_DIV1 ((uint32_t)0x0000U) /*!< No prescaler is used */
+#define TIM_ETRPRESCALER_DIV2 (TIM_SMCR_ETPS_0) /*!< ETR input source is divided by 2 */
+#define TIM_ETRPRESCALER_DIV4 (TIM_SMCR_ETPS_1) /*!< ETR input source is divided by 4 */
+#define TIM_ETRPRESCALER_DIV8 (TIM_SMCR_ETPS) /*!< ETR input source is divided by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Counter_Mode TIM Counter Mode
+ * @{
+ */
+#define TIM_COUNTERMODE_UP ((uint32_t)0x0000U)
+#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR
+#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0
+#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1
+#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClockDivision TIM Clock Division
+ * @{
+ */
+#define TIM_CLOCKDIVISION_DIV1 ((uint32_t)0x0000U)
+#define TIM_CLOCKDIVISION_DIV2 (TIM_CR1_CKD_0)
+#define TIM_CLOCKDIVISION_DIV4 (TIM_CR1_CKD_1)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_State TIM Output Compare State
+ * @{
+ */
+#define TIM_OUTPUTSTATE_DISABLE ((uint32_t)0x0000U)
+#define TIM_OUTPUTSTATE_ENABLE (TIM_CCER_CC1E)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload
+ * @{
+ */
+#define TIM_AUTORELOAD_PRELOAD_DISABLE ((uint32_t)0x0000) /*!< TIMx_ARR register is not buffered */
+#define TIM_AUTORELOAD_PRELOAD_ENABLE (TIM_CR1_ARPE) /*!< TIMx_ARR register is buffered */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Fast_State TIM Output Fast State
+ * @{
+ */
+#define TIM_OCFAST_DISABLE ((uint32_t)0x0000U)
+#define TIM_OCFAST_ENABLE (TIM_CCMR1_OC1FE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State
+ * @{
+ */
+#define TIM_OUTPUTNSTATE_DISABLE ((uint32_t)0x0000U)
+#define TIM_OUTPUTNSTATE_ENABLE (TIM_CCER_CC1NE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity
+ * @{
+ */
+#define TIM_OCPOLARITY_HIGH ((uint32_t)0x0000U)
+#define TIM_OCPOLARITY_LOW (TIM_CCER_CC1P)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity
+ * @{
+ */
+#define TIM_OCNPOLARITY_HIGH ((uint32_t)0x0000U)
+#define TIM_OCNPOLARITY_LOW (TIM_CCER_CC1NP)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State
+ * @{
+ */
+#define TIM_OCIDLESTATE_SET (TIM_CR2_OIS1)
+#define TIM_OCIDLESTATE_RESET ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State TIM Output Compare N Idle State
+ * @{
+ */
+#define TIM_OCNIDLESTATE_SET (TIM_CR2_OIS1N)
+#define TIM_OCNIDLESTATE_RESET ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity
+ * @{
+ */
+#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING
+#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING
+#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
+ * @{
+ */
+#define TIM_ICSELECTION_DIRECTTI (TIM_CCMR1_CC1S_0) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI (TIM_CCMR1_CC1S_1) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_TRC (TIM_CCMR1_CC1S) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler
+ * @{
+ */
+#define TIM_ICPSC_DIV1 ((uint32_t)0x0000U) /*!< Capture performed each time an edge is detected on the capture input */
+#define TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0) /*!< Capture performed once every 2 events */
+#define TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 4 events */
+#define TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC) /*!< Capture performed once every 8 events */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode
+ * @{
+ */
+#define TIM_OPMODE_SINGLE (TIM_CR1_OPM)
+#define TIM_OPMODE_REPETITIVE ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Encoder_Mode TIM Encoder Mode
+ * @{
+ */
+#define TIM_ENCODERMODE_TI1 (TIM_SMCR_SMS_0)
+#define TIM_ENCODERMODE_TI2 (TIM_SMCR_SMS_1)
+#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Interrupt_definition TIM Interrupt definition
+ * @{
+ */
+#define TIM_IT_UPDATE (TIM_DIER_UIE)
+#define TIM_IT_CC1 (TIM_DIER_CC1IE)
+#define TIM_IT_CC2 (TIM_DIER_CC2IE)
+#define TIM_IT_CC3 (TIM_DIER_CC3IE)
+#define TIM_IT_CC4 (TIM_DIER_CC4IE)
+#define TIM_IT_COM (TIM_DIER_COMIE)
+#define TIM_IT_TRIGGER (TIM_DIER_TIE)
+#define TIM_IT_BREAK (TIM_DIER_BIE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Commutation_Source TIM Commutation Source
+ * @{
+ */
+#define TIM_COMMUTATION_TRGI (TIM_CR2_CCUS)
+#define TIM_COMMUTATION_SOFTWARE ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_sources TIM DMA sources
+ * @{
+ */
+#define TIM_DMA_UPDATE (TIM_DIER_UDE)
+#define TIM_DMA_CC1 (TIM_DIER_CC1DE)
+#define TIM_DMA_CC2 (TIM_DIER_CC2DE)
+#define TIM_DMA_CC3 (TIM_DIER_CC3DE)
+#define TIM_DMA_CC4 (TIM_DIER_CC4DE)
+#define TIM_DMA_COM (TIM_DIER_COMDE)
+#define TIM_DMA_TRIGGER (TIM_DIER_TDE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Event_Source TIM Event Source
+ * @{
+ */
+#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG
+#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G
+#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G
+#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G
+#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G
+#define TIM_EVENTSOURCE_COM TIM_EGR_COMG
+#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG
+#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG
+#define TIM_EVENTSOURCE_BREAK2 TIM_EGR_B2G
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Flag_definition TIM Flag definition
+ * @{
+ */
+#define TIM_FLAG_UPDATE (TIM_SR_UIF)
+#define TIM_FLAG_CC1 (TIM_SR_CC1IF)
+#define TIM_FLAG_CC2 (TIM_SR_CC2IF)
+#define TIM_FLAG_CC3 (TIM_SR_CC3IF)
+#define TIM_FLAG_CC4 (TIM_SR_CC4IF)
+#define TIM_FLAG_COM (TIM_SR_COMIF)
+#define TIM_FLAG_TRIGGER (TIM_SR_TIF)
+#define TIM_FLAG_BREAK (TIM_SR_BIF)
+#define TIM_FLAG_BREAK2 (TIM_SR_B2IF)
+#define TIM_FLAG_CC1OF (TIM_SR_CC1OF)
+#define TIM_FLAG_CC2OF (TIM_SR_CC2OF)
+#define TIM_FLAG_CC3OF (TIM_SR_CC3OF)
+#define TIM_FLAG_CC4OF (TIM_SR_CC4OF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Source TIM Clock Source
+ * @{
+ */
+#define TIM_CLOCKSOURCE_ETRMODE2 (TIM_SMCR_ETPS_1)
+#define TIM_CLOCKSOURCE_INTERNAL (TIM_SMCR_ETPS_0)
+#define TIM_CLOCKSOURCE_ITR0 ((uint32_t)0x0000U)
+#define TIM_CLOCKSOURCE_ITR1 (TIM_SMCR_TS_0)
+#define TIM_CLOCKSOURCE_ITR2 (TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_TI1ED (TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_ETRMODE1 (TIM_SMCR_TS)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Polarity TIM Clock Polarity
+ * @{
+ */
+#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler
+ * @{
+ */
+#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
+#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
+#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity
+ * @{
+ */
+#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */
+#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler
+ * @{
+ */
+#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state
+ * @{
+ */
+#define TIM_OSSR_ENABLE (TIM_BDTR_OSSR)
+#define TIM_OSSR_DISABLE ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state
+ * @{
+ */
+#define TIM_OSSI_ENABLE (TIM_BDTR_OSSI)
+#define TIM_OSSI_DISABLE ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Lock_level TIM Lock level
+ * @{
+ */
+#define TIM_LOCKLEVEL_OFF ((uint32_t)0x0000U)
+#define TIM_LOCKLEVEL_1 (TIM_BDTR_LOCK_0)
+#define TIM_LOCKLEVEL_2 (TIM_BDTR_LOCK_1)
+#define TIM_LOCKLEVEL_3 (TIM_BDTR_LOCK)
+/**
+ * @}
+ */
+/** @defgroup TIM_Break_Input_enable_disable TIM Break Input State
+ * @{
+ */
+#define TIM_BREAK_ENABLE (TIM_BDTR_BKE)
+#define TIM_BREAK_DISABLE ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Break_Polarity TIM Break Polarity
+ * @{
+ */
+#define TIM_BREAKPOLARITY_LOW ((uint32_t)0x0000U)
+#define TIM_BREAKPOLARITY_HIGH (TIM_BDTR_BKP)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_AOE_Bit_Set_Reset TIM AOE Bit State
+ * @{
+ */
+#define TIM_AUTOMATICOUTPUT_ENABLE (TIM_BDTR_AOE)
+#define TIM_AUTOMATICOUTPUT_DISABLE ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection
+ * @{
+ */
+#define TIM_TRGO_RESET ((uint32_t)0x0000U)
+#define TIM_TRGO_ENABLE (TIM_CR2_MMS_0)
+#define TIM_TRGO_UPDATE (TIM_CR2_MMS_1)
+#define TIM_TRGO_OC1 ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC1REF (TIM_CR2_MMS_2)
+#define TIM_TRGO_OC2REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC3REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1))
+#define TIM_TRGO_OC4REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Slave_Mode TIM Master Slave Mode
+ * @{
+ */
+#define TIM_MASTERSLAVEMODE_ENABLE ((uint32_t)0x0080)
+#define TIM_MASTERSLAVEMODE_DISABLE ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Selection TIM Trigger Selection
+ * @{
+ */
+#define TIM_TS_ITR0 ((uint32_t)0x0000U)
+#define TIM_TS_ITR1 ((uint32_t)0x0010U)
+#define TIM_TS_ITR2 ((uint32_t)0x0020U)
+#define TIM_TS_ITR3 ((uint32_t)0x0030U)
+#define TIM_TS_TI1F_ED ((uint32_t)0x0040U)
+#define TIM_TS_TI1FP1 ((uint32_t)0x0050U)
+#define TIM_TS_TI2FP2 ((uint32_t)0x0060U)
+#define TIM_TS_ETRF ((uint32_t)0x0070U)
+#define TIM_TS_NONE ((uint32_t)0xFFFFU)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity
+ * @{
+ */
+#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler
+ * @{
+ */
+#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
+#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
+#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+
+/** @defgroup TIM_TI1_Selection TIM TI1 Selection
+ * @{
+ */
+#define TIM_TI1SELECTION_CH1 ((uint32_t)0x0000U)
+#define TIM_TI1SELECTION_XORCOMBINATION (TIM_CR2_TI1S)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address TIM DMA Base address
+ * @{
+ */
+#define TIM_DMABASE_CR1 (0x00000000U)
+#define TIM_DMABASE_CR2 (0x00000001U)
+#define TIM_DMABASE_SMCR (0x00000002U)
+#define TIM_DMABASE_DIER (0x00000003U)
+#define TIM_DMABASE_SR (0x00000004U)
+#define TIM_DMABASE_EGR (0x00000005U)
+#define TIM_DMABASE_CCMR1 (0x00000006U)
+#define TIM_DMABASE_CCMR2 (0x00000007U)
+#define TIM_DMABASE_CCER (0x00000008U)
+#define TIM_DMABASE_CNT (0x00000009U)
+#define TIM_DMABASE_PSC (0x0000000AU)
+#define TIM_DMABASE_ARR (0x0000000BU)
+#define TIM_DMABASE_RCR (0x0000000CU)
+#define TIM_DMABASE_CCR1 (0x0000000DU)
+#define TIM_DMABASE_CCR2 (0x0000000EU)
+#define TIM_DMABASE_CCR3 (0x0000000FU)
+#define TIM_DMABASE_CCR4 (0x00000010U)
+#define TIM_DMABASE_BDTR (0x00000011U)
+#define TIM_DMABASE_DCR (0x00000012U)
+#define TIM_DMABASE_OR (0x00000013U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
+ * @{
+ */
+#define TIM_DMABURSTLENGTH_1TRANSFER (0x00000000U)
+#define TIM_DMABURSTLENGTH_2TRANSFERS (0x00000100U)
+#define TIM_DMABURSTLENGTH_3TRANSFERS (0x00000200U)
+#define TIM_DMABURSTLENGTH_4TRANSFERS (0x00000300U)
+#define TIM_DMABURSTLENGTH_5TRANSFERS (0x00000400U)
+#define TIM_DMABURSTLENGTH_6TRANSFERS (0x00000500U)
+#define TIM_DMABURSTLENGTH_7TRANSFERS (0x00000600U)
+#define TIM_DMABURSTLENGTH_8TRANSFERS (0x00000700U)
+#define TIM_DMABURSTLENGTH_9TRANSFERS (0x00000800U)
+#define TIM_DMABURSTLENGTH_10TRANSFERS (0x00000900U)
+#define TIM_DMABURSTLENGTH_11TRANSFERS (0x00000A00U)
+#define TIM_DMABURSTLENGTH_12TRANSFERS (0x00000B00U)
+#define TIM_DMABURSTLENGTH_13TRANSFERS (0x00000C00U)
+#define TIM_DMABURSTLENGTH_14TRANSFERS (0x00000D00U)
+#define TIM_DMABURSTLENGTH_15TRANSFERS (0x00000E00U)
+#define TIM_DMABURSTLENGTH_16TRANSFERS (0x00000F00U)
+#define TIM_DMABURSTLENGTH_17TRANSFERS (0x00001000U)
+#define TIM_DMABURSTLENGTH_18TRANSFERS (0x00001100U)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Handle_index DMA Handle index
+ * @{
+ */
+#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0U) /*!< Index of the DMA handle used for Update DMA requests */
+#define TIM_DMA_ID_CC1 ((uint16_t) 0x1U) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
+#define TIM_DMA_ID_CC2 ((uint16_t) 0x2U) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
+#define TIM_DMA_ID_CC3 ((uint16_t) 0x3U) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
+#define TIM_DMA_ID_CC4 ((uint16_t) 0x4U) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
+#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x5U) /*!< Index of the DMA handle used for Commutation DMA requests */
+#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x6U) /*!< Index of the DMA handle used for Trigger DMA requests */
+/**
+ * @}
+ */
+
+/** @defgroup Channel_CC_State Channel CC State
+ * @{
+ */
+#define TIM_CCx_ENABLE ((uint32_t)0x0001U)
+#define TIM_CCx_DISABLE ((uint32_t)0x0000U)
+#define TIM_CCxN_ENABLE ((uint32_t)0x0004U)
+#define TIM_CCxN_DISABLE ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Macros TIM Exported Macros
+ * @{
+ */
+/** @brief Reset TIM handle state
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
+
+/**
+ * @brief Enable the TIM peripheral.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
+
+/**
+ * @brief Enable the TIM update source request.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_URS))
+
+/**
+ * @brief Enable the TIM main Output.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
+
+/**
+ * @brief Disable the TIM peripheral.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0) \
+ { \
+ (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
+ } \
+ } \
+ } while(0)
+
+/**
+ * @brief Disable the TIM update source request.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~(TIM_CR1_URS))
+
+/**
+ * @brief Disable the TIM main Output.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled
+ */
+#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0) \
+ { \
+ (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
+ } \
+ } \
+ } while(0)
+
+/** @brief Enable the specified TIM interrupt.
+ * @param __HANDLE__: specifies the TIM Handle.
+ * @param __INTERRUPT__: specifies the TIM interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
+
+/** @brief Disable the specified TIM interrupt.
+ * @param __HANDLE__: specifies the TIM Handle.
+ * @param __INTERRUPT__: specifies the TIM interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
+
+/** @brief Enable the specified DMA request.
+ * @param __HANDLE__: specifies the TIM Handle.
+ * @param __DMA__: specifies the TIM DMA request to enable.
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: Update DMA request
+ * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request
+ * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request
+ * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request
+ * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request
+ * @arg TIM_DMA_COM: Commutation DMA request
+ * @arg TIM_DMA_TRIGGER: Trigger DMA request
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__))
+
+/** @brief Disable the specified DMA request.
+ * @param __HANDLE__: specifies the TIM Handle.
+ * @param __DMA__: specifies the TIM DMA request to disable.
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: Update DMA request
+ * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request
+ * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request
+ * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request
+ * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request
+ * @arg TIM_DMA_COM: Commutation DMA request
+ * @arg TIM_DMA_TRIGGER: Trigger DMA request
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
+
+/** @brief Check whether the specified TIM interrupt flag is set or not.
+ * @param __HANDLE__: specifies the TIM Handle.
+ * @param __FLAG__: specifies the TIM interrupt flag to check.
+ * This parameter can be one of the following values:
+ * @arg TIM_FLAG_UPDATE: Update interrupt flag
+ * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
+ * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
+ * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
+ * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
+ * @arg TIM_FLAG_COM: Commutation interrupt flag
+ * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
+ * @arg TIM_FLAG_BREAK: Break interrupt flag
+ * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag
+ * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
+ * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
+ * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
+ * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the specified TIM interrupt flag.
+ * @param __HANDLE__: specifies the TIM Handle.
+ * @param __FLAG__: specifies the TIM interrupt flag to clear.
+ * This parameter can be one of the following values:
+ * @arg TIM_FLAG_UPDATE: Update interrupt flag
+ * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
+ * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
+ * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
+ * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
+ * @arg TIM_FLAG_COM: Commutation interrupt flag
+ * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
+ * @arg TIM_FLAG_BREAK: Break interrupt flag
+ * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag
+ * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
+ * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
+ * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
+ * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/**
+ * @brief Check whether the specified TIM interrupt source is enabled or not.
+ * @param __HANDLE__: TIM handle
+ * @param __INTERRUPT__: specifies the TIM interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval The state of TIM_IT (SET or RESET).
+ */
+#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Clear the TIM interrupt pending bits.
+ * @param __HANDLE__: TIM handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval None
+ */
+#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+/**
+ * @brief Indicates whether or not the TIM Counter is used as downcounter.
+ * @param __HANDLE__: TIM handle.
+ * @retval False (Counter used as upcounter) or True (Counter used as downcounter)
+ * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder
+mode.
+ */
+#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
+
+/**
+ * @brief Set the TIM Prescaler on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @param __PRESC__: specifies the Prescaler new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
+
+/**
+ * @brief Set the TIM Counter Register value on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @param __COUNTER__ specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
+
+/**
+ * @brief Get the TIM Counter Register value on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @retval 16-bit or 32-bit value of the timer counter register
+ */
+#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT)
+
+/**
+ * @brief Set the TIM Autoreload Register value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__ TIM handle.
+ * @param __AUTORELOAD__ specifies the Counter register new value.
+ * @retval 16-bit or 32-bit value of the timer auto-reload
+ */
+#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \
+ do{ \
+ (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \
+ (__HANDLE__)->Init.Period = (__AUTORELOAD__); \
+ } while(0)
+/**
+ * @brief Get the TIM Autoreload Register value on runtime
+ * @param __HANDLE__ TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR)
+
+/**
+ * @brief Set the TIM Clock Division value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CKD__ specifies the clock division value.
+ * This parameter can be one of the following value:
+ * @arg TIM_CLOCKDIVISION_DIV1
+ * @arg TIM_CLOCKDIVISION_DIV2
+ * @arg TIM_CLOCKDIVISION_DIV4
+ * @retval None
+ */
+#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \
+ do{ \
+ (__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD); \
+ (__HANDLE__)->Instance->CR1 |= (__CKD__); \
+ (__HANDLE__)->Init.ClockDivision = (__CKD__); \
+ } while(0)
+/**
+ * @brief Get the TIM Clock Division value on runtime
+ * @param __HANDLE__ TIM handle.
+ * @retval The clock division can be one of the following values:
+ * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT
+ */
+#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
+
+/**
+ * @brief Set the TIM Input Capture prescaler on runtime without calling
+ * another time HAL_TIM_IC_ConfigChannel() function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __ICPSC__ specifies the Input Capture4 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \
+ do{ \
+ TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \
+ TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
+ } while(0)
+
+/**
+ * @brief Get the TIM Input Capture prescaler on runtime
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get input capture 1 prescaler value
+ * @arg TIM_CHANNEL_2: get input capture 2 prescaler value
+ * @arg TIM_CHANNEL_3: get input capture 3 prescaler value
+ * @arg TIM_CHANNEL_4: get input capture 4 prescaler value
+ * @retval The input capture prescaler can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ */
+#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
+ (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8)
+
+/**
+ * @brief Set the TIM Capture x input polarity on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __POLARITY__ Polarity for TIx source
+ * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge
+ * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge
+ * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge
+ * @note The polarity TIM_INPUTCHANNELPOLARITY_BOTHEDGE is not authorized for TIM Channel 4.
+ * @retval None
+ */
+#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+ do{ \
+ TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \
+ TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \
+ }while(0)
+
+/**
+ * @}
+ */
+/* End of exported macros ----------------------------------------------------*/
+
+/* Include TIM HAL Extension module */
+#include "stm32f7xx_hal_tim_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIM_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group1
+ * @{
+ */
+
+/* Time Base functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group2
+ * @{
+ */
+/* Timer Output Compare functions **********************************************/
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group3
+ * @{
+ */
+/* Timer PWM functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
+
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group4
+ * @{
+ */
+/* Timer Input Capture functions ***********************************************/
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group5
+ * @{
+ */
+/* Timer One Pulse functions ***************************************************/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group6
+ * @{
+ */
+/* Timer Encoder functions *****************************************************/
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group7
+ * @{
+ */
+/* Interrupt Handler functions **********************************************/
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group8
+ * @{
+ */
+/* Control functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel);
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig);
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group9
+ * @{
+ */
+/* Callback in non blocking modes (Interrupt and DMA) *************************/
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
+
+/* Callbacks Register/UnRegister functions ***********************************/
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, pTIM_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group10
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup TIM_Private_Constants TIM Private Constants
+ * @{
+ */
+/* The counter of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
+#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
+/**
+ * @}
+ */
+/* End of private constants --------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup TIM_Private_Macros TIM Private Macros
+ * @{
+ */
+
+/** @defgroup TIM_IS_TIM_Definitions TIM Private macros to check input parameters
+ * @{
+ */
+#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \
+ ((__MODE__) == TIM_COUNTERMODE_DOWN) || \
+ ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \
+ ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \
+ ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3))
+
+#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \
+ ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \
+ ((__DIV__) == TIM_CLOCKDIVISION_DIV4))
+
+#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \
+ ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE))
+
+#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \
+ ((__STATE__) == TIM_OCFAST_ENABLE))
+
+#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OUTPUTSTATE_DISABLE) || \
+ ((STATE) == TIM_OUTPUTSTATE_ENABLE))
+
+#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OUTPUTNSTATE_DISABLE) || \
+ ((STATE) == TIM_OUTPUTNSTATE_ENABLE))
+
+#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \
+ ((__POLARITY__) == TIM_OCPOLARITY_LOW))
+
+#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \
+ ((__POLARITY__) == TIM_OCNPOLARITY_LOW))
+
+#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \
+ ((__STATE__) == TIM_OCIDLESTATE_RESET))
+
+#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \
+ ((__STATE__) == TIM_OCNIDLESTATE_RESET))
+
+#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \
+ ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \
+ ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE))
+
+#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \
+ ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \
+ ((__SELECTION__) == TIM_ICSELECTION_TRC))
+
+#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \
+ ((__PRESCALER__) == TIM_ICPSC_DIV2) || \
+ ((__PRESCALER__) == TIM_ICPSC_DIV4) || \
+ ((__PRESCALER__) == TIM_ICPSC_DIV8))
+
+#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \
+ ((__MODE__) == TIM_OPMODE_REPETITIVE))
+
+#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \
+ ((__MODE__) == TIM_ENCODERMODE_TI2) || \
+ ((__MODE__) == TIM_ENCODERMODE_TI12))
+
+#define IS_TIM_IT(__IT__) ((((__IT__) & 0xFFFFFF00U) == 0x00000000U) && ((__IT__) != 0x00000000U))
+
+
+#define IS_TIM_GET_IT(__IT__) (((__IT__) == TIM_IT_UPDATE) || \
+ ((__IT__) == TIM_IT_CC1) || \
+ ((__IT__) == TIM_IT_CC2) || \
+ ((__IT__) == TIM_IT_CC3) || \
+ ((__IT__) == TIM_IT_CC4) || \
+ ((__IT__) == TIM_IT_COM) || \
+ ((__IT__) == TIM_IT_TRIGGER) || \
+ ((__IT__) == TIM_IT_BREAK))
+
+#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U))
+
+#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFE00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U))
+
+#define IS_TIM_FLAG(__FLAG__) (((__FLAG__) == TIM_FLAG_UPDATE) || \
+ ((__FLAG__) == TIM_FLAG_CC1) || \
+ ((__FLAG__) == TIM_FLAG_CC2) || \
+ ((__FLAG__) == TIM_FLAG_CC3) || \
+ ((__FLAG__) == TIM_FLAG_CC4) || \
+ ((__FLAG__) == TIM_FLAG_COM) || \
+ ((__FLAG__) == TIM_FLAG_TRIGGER) || \
+ ((__FLAG__) == TIM_FLAG_BREAK) || \
+ ((__FLAG__) == TIM_FLAG_BREAK2) || \
+ ((__FLAG__) == TIM_FLAG_CC1OF) || \
+ ((__FLAG__) == TIM_FLAG_CC2OF) || \
+ ((__FLAG__) == TIM_FLAG_CC3OF) || \
+ ((__FLAG__) == TIM_FLAG_CC4OF))
+
+#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1))
+
+#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \
+ ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \
+ ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \
+ ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \
+ ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE))
+
+#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \
+ ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \
+ ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \
+ ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8))
+
+#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xF)
+
+#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
+ ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
+
+#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \
+ ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \
+ ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \
+ ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8))
+
+#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xF)
+
+#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \
+ ((__STATE__) == TIM_OSSR_DISABLE))
+
+#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \
+ ((__STATE__) == TIM_OSSI_DISABLE))
+
+#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \
+ ((__LEVEL__) == TIM_LOCKLEVEL_1) || \
+ ((__LEVEL__) == TIM_LOCKLEVEL_2) || \
+ ((__LEVEL__) == TIM_LOCKLEVEL_3))
+
+#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \
+ ((__STATE__) == TIM_BREAK_DISABLE))
+
+#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \
+ ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH))
+
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \
+ ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE))
+
+#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \
+ ((__SOURCE__) == TIM_TRGO_ENABLE) || \
+ ((__SOURCE__) == TIM_TRGO_UPDATE) || \
+ ((__SOURCE__) == TIM_TRGO_OC1) || \
+ ((__SOURCE__) == TIM_TRGO_OC1REF) || \
+ ((__SOURCE__) == TIM_TRGO_OC2REF) || \
+ ((__SOURCE__) == TIM_TRGO_OC3REF) || \
+ ((__SOURCE__) == TIM_TRGO_OC4REF))
+
+#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \
+ ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE))
+
+#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \
+ ((__SELECTION__) == TIM_TS_ITR1) || \
+ ((__SELECTION__) == TIM_TS_ITR2) || \
+ ((__SELECTION__) == TIM_TS_ITR3) || \
+ ((__SELECTION__) == TIM_TS_TI1F_ED) || \
+ ((__SELECTION__) == TIM_TS_TI1FP1) || \
+ ((__SELECTION__) == TIM_TS_TI2FP2) || \
+ ((__SELECTION__) == TIM_TS_ETRF))
+
+#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3))
+
+#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \
+ ((__SELECTION__) == TIM_TS_ITR1) || \
+ ((__SELECTION__) == TIM_TS_ITR2) || \
+ ((__SELECTION__) == TIM_TS_ITR3) || \
+ ((__SELECTION__) == TIM_TS_NONE))
+
+#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \
+ ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
+ ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \
+ ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \
+ ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE ))
+
+#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \
+ ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \
+ ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \
+ ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8))
+
+#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xF)
+
+#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \
+ ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION))
+
+#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \
+ ((__BASE__) == TIM_DMABASE_CR2) || \
+ ((__BASE__) == TIM_DMABASE_SMCR) || \
+ ((__BASE__) == TIM_DMABASE_DIER) || \
+ ((__BASE__) == TIM_DMABASE_SR) || \
+ ((__BASE__) == TIM_DMABASE_EGR) || \
+ ((__BASE__) == TIM_DMABASE_CCMR1) || \
+ ((__BASE__) == TIM_DMABASE_CCMR2) || \
+ ((__BASE__) == TIM_DMABASE_CCER) || \
+ ((__BASE__) == TIM_DMABASE_CNT) || \
+ ((__BASE__) == TIM_DMABASE_PSC) || \
+ ((__BASE__) == TIM_DMABASE_ARR) || \
+ ((__BASE__) == TIM_DMABASE_RCR) || \
+ ((__BASE__) == TIM_DMABASE_CCR1) || \
+ ((__BASE__) == TIM_DMABASE_CCR2) || \
+ ((__BASE__) == TIM_DMABASE_CCR3) || \
+ ((__BASE__) == TIM_DMABASE_CCR4) || \
+ ((__BASE__) == TIM_DMABASE_BDTR) || \
+ ((__BASE__) == TIM_DMABASE_DCR) || \
+ ((__BASE__) == TIM_DMABASE_OR))
+
+#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS))
+
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ICPRESCALER TIM Private macros to SET/RESET TIM Input capture value
+ * @{
+ */
+#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
+ ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8)))
+
+#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\
+ ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_CAPTUREPOLARITY TIM Private macros to SET/RESET TIM capture polarity value
+ * @{
+ */
+#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8)) :\
+ ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12) & TIM_CCER_CC4P)))
+
+#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\
+ ((__HANDLE__)->Instance->CCER &= (uint16_t)~TIM_CCER_CC4P))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* End of private macros -----------------------------------------------------*/
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup TIM_Private_Functions TIM Private Functions
+ * @{
+ */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
+void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler, uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
+
+void HAL_TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
+void HAL_TIM_DMAError(DMA_HandleTypeDef *hdma);
+void HAL_TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+void TIM_ResetCallback(TIM_HandleTypeDef *htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+/* End of private functions --------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_TIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h
new file mode 100644
index 00000000..b5034904
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h
@@ -0,0 +1,661 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_tim_ex.h
+ * @author MCD Application Team
+ * @brief Header file of TIM HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_TIM_EX_H
+#define __STM32F7xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIMEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIM Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Hall sensor Configuration Structure definition
+ */
+
+typedef struct
+{
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+} TIM_HallSensor_InitTypeDef;
+
+/**
+ * @brief TIM Master configuration Structure definition
+ */
+typedef struct {
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection.
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection
+ This parameter can be a value of @ref TIMEx_Master_Mode_Selection_2 */
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection.
+ This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+
+/**
+ * @brief TIM Break input(s) and Dead time configuration Structure definition
+ * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable
+ * filter and polarity.
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode.
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode.
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level.
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time.
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint32_t BreakState; /*!< TIM Break State.
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity.
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t BreakFilter; /*!< Specifies the break input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t Break2State; /*!< TIM Break2 State
+ This parameter can be a value of @ref TIMEx_Break2_Input_enable_disable */
+ uint32_t Break2Polarity; /*!< TIM Break2 input polarity
+ This parameter can be a value of @ref TIMEx_Break2_Polarity */
+ uint32_t Break2Filter; /*!< TIM break2 input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BreakDeadTimeConfigTypeDef;
+
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+/**
+ * @brief TIM Break/Break2 input configuration
+ */
+typedef struct {
+ uint32_t Source; /*!< Specifies the source of the timer break input.
+ This parameter can be a value of @ref TIMEx_Break_Input_Source */
+ uint32_t Enable; /*!< Specifies whether or not the break input source is enabled.
+ This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */
+ uint32_t Polarity; /*!< Specifies the break input source polarity.
+ This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity
+ Not relevant when analog watchdog output of the DFSDM1 used as break input source */
+} TIMEx_BreakInputConfigTypeDef;
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants TIMEx Exported Constants
+ * @{
+ */
+
+/** @defgroup TIMEx_Channel TIMEx Channel
+ * @{
+ */
+
+#define TIM_CHANNEL_1 ((uint32_t)0x0000U)
+#define TIM_CHANNEL_2 ((uint32_t)0x0004U)
+#define TIM_CHANNEL_3 ((uint32_t)0x0008U)
+#define TIM_CHANNEL_4 ((uint32_t)0x000CU)
+#define TIM_CHANNEL_5 ((uint32_t)0x0010U)
+#define TIM_CHANNEL_6 ((uint32_t)0x0014U)
+#define TIM_CHANNEL_ALL ((uint32_t)0x003CU)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Output_Compare_and_PWM_modes TIMEx Output Compare and PWM Modes
+ * @{
+ */
+#define TIM_OCMODE_TIMING ((uint32_t)0x0000U)
+#define TIM_OCMODE_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE ((uint32_t)TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_PWM1 ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM2 ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_FORCED_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_FORCED_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_2)
+
+#define TIM_OCMODE_RETRIGERRABLE_OPM1 ((uint32_t)TIM_CCMR1_OC1M_3)
+#define TIM_OCMODE_RETRIGERRABLE_OPM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_COMBINED_PWM1 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_COMBINED_PWM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_ASSYMETRIC_PWM1 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_ASSYMETRIC_PWM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Remap TIMEx Remap
+ * @{
+ */
+#define TIM_TIM2_TIM8_TRGO (0x00000000U)
+#define TIM_TIM2_ETH_PTP (0x00000400U)
+#define TIM_TIM2_USBFS_SOF (0x00000800U)
+#define TIM_TIM2_USBHS_SOF (0x00000C00U)
+#define TIM_TIM5_GPIO (0x00000000U)
+#define TIM_TIM5_LSI (0x00000040U)
+#define TIM_TIM5_LSE (0x00000080U)
+#define TIM_TIM5_RTC (0x000000C0U)
+#define TIM_TIM11_GPIO (0x00000000U)
+#define TIM_TIM11_SPDIFRX (0x00000001U)
+#define TIM_TIM11_HSE (0x00000002U)
+#define TIM_TIM11_MCO1 (0x00000003U)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_ClearInput_Source TIMEx Clear Input Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x0001U)
+#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break2_Input_enable_disable TIMEx Break input 2 Enable
+ * @{
+ */
+#define TIM_BREAK2_DISABLE ((uint32_t)0x00000000U)
+#define TIM_BREAK2_ENABLE ((uint32_t)TIM_BDTR_BK2E)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break2_Polarity TIMEx Break2 Polarity
+ * @{
+ */
+#define TIM_BREAK2POLARITY_LOW ((uint32_t)0x00000000U)
+#define TIM_BREAK2POLARITY_HIGH (TIM_BDTR_BK2P)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Group_Channel5 TIMEx Group Channel 5 and Channel 1, 2 or 3
+ * @{
+ */
+#define TIM_GROUPCH5_NONE ((uint32_t)0x00000000U) /* !< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */
+#define TIM_GROUPCH5_OC1REFC (TIM_CCR5_GC5C1) /* !< OC1REFC is the logical AND of OC1REFC and OC5REF */
+#define TIM_GROUPCH5_OC2REFC (TIM_CCR5_GC5C2) /* !< OC2REFC is the logical AND of OC2REFC and OC5REF */
+#define TIM_GROUPCH5_OC3REFC (TIM_CCR5_GC5C3) /* !< OC3REFC is the logical AND of OC3REFC and OC5REF */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Master_Mode_Selection_2 TIMEx Master Mode Selection 2 (TRGO2)
+ * @{
+ */
+#define TIM_TRGO2_RESET ((uint32_t)0x00000000U)
+#define TIM_TRGO2_ENABLE ((uint32_t)(TIM_CR2_MMS2_0))
+#define TIM_TRGO2_UPDATE ((uint32_t)(TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC1 ((uint32_t)(TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC1REF ((uint32_t)(TIM_CR2_MMS2_2))
+#define TIM_TRGO2_OC2REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC3REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC4REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC5REF ((uint32_t)(TIM_CR2_MMS2_3))
+#define TIM_TRGO2_OC6REF ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC4REF_RISINGFALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC6REF_RISINGFALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC4REF_RISING_OC6REF_RISING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2))
+#define TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC5REF_RISING_OC6REF_RISING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Slave_Mode TIMEx Slave mode
+ * @{
+ */
+#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x0000U)
+#define TIM_SLAVEMODE_RESET ((uint32_t)(TIM_SMCR_SMS_2))
+#define TIM_SLAVEMODE_GATED ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_TRIGGER ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1))
+#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER ((uint32_t)(TIM_SMCR_SMS_3))
+/**
+ * @}
+ */
+#if defined(STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+/** @defgroup TIMEx_Break_Input TIM Extended Break input
+ * @{
+ */
+#define TIM_BREAKINPUT_BRK ((uint32_t)0x00000001U) /* !< Timer break input */
+#define TIM_BREAKINPUT_BRK2 ((uint32_t)0x00000002U) /* !< Timer break2 input */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source
+ * @{
+ */
+#define TIM_BREAKINPUTSOURCE_BKIN ((uint32_t)0x00000001U) /* !< An external source (GPIO) is connected to the BKIN pin */
+#define TIM_BREAKINPUTSOURCE_DFSDM1 ((uint32_t)0x00000008U) /* !< The analog watchdog output of the DFSDM1 peripheral is connected to the break input */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling
+ * @{
+ */
+#define TIM_BREAKINPUTSOURCE_DISABLE ((uint32_t)0x00000000U) /* !< Break input source is disabled */
+#define TIM_BREAKINPUTSOURCE_ENABLE ((uint32_t)0x00000001U) /* !< Break input source is enabled */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity
+ * @{
+ */
+#define TIM_BREAKINPUTSOURCE_POLARITY_LOW ((uint32_t)(0x00000001)) /* !< Break input source is active low */
+#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH ((uint32_t)(0x00000000)) /* !< Break input source is active_high */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Macros TIMEx Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Sets the TIM Capture Compare Register value on runtime without
+ * calling another time ConfigChannel function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @param __COMPARE__ specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\
+ ((__HANDLE__)->Instance->CCR6 = (__COMPARE__)))
+
+/**
+ * @brief Gets the TIM Capture Compare Register value on runtime
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @arg TIM_CHANNEL_5: get capture/compare 5 register value
+ * @arg TIM_CHANNEL_6: get capture/compare 6 register value
+ * @retval None
+ */
+#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\
+ ((__HANDLE__)->Instance->CCR6))
+
+/**
+ * @brief Sets the TIM Output compare preload.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5PE) :\
+ ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6PE))
+
+/**
+ * @brief Resets the TIM Output compare preload.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC1PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC2PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC3PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC4PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= (uint16_t)~TIM_CCMR3_OC5PE) :\
+ ((__HANDLE__)->Instance->CCMR3 &= (uint16_t)~TIM_CCMR3_OC6PE))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1
+ * @{
+ */
+/* Timer Hall Sensor functions **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef* htim, TIM_HallSensor_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef* htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef* htim);
+
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef* htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef* htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group2
+ * @{
+ */
+/* Timer Complementary Output Compare functions *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group3
+ * @{
+ */
+/* Timer Complementary PWM functions ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group4
+ * @{
+ */
+/* Timer Complementary One Pulse functions **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group5
+ * @{
+ */
+/* Extension Control functions ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef* htim, TIM_MasterConfigTypeDef * sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef* htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, TIMEx_BreakInputConfigTypeDef *sBreakInputConfig);
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef* htim, uint32_t Remap);
+HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t OCRef);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group6
+ * @{
+ */
+/* Extension Callback *********************************************************/
+void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group7
+ * @{
+ */
+/* Extension Peripheral State functions **************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef* htim);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Macros TIMEx Private Macros
+ * @{
+ */
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_5) || \
+ ((CHANNEL) == TIM_CHANNEL_6) || \
+ ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+ ((MODE) == TIM_OCMODE_PWM2) || \
+ ((MODE) == TIM_OCMODE_COMBINED_PWM1) || \
+ ((MODE) == TIM_OCMODE_COMBINED_PWM2) || \
+ ((MODE) == TIM_OCMODE_ASSYMETRIC_PWM1) || \
+ ((MODE) == TIM_OCMODE_ASSYMETRIC_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
+ ((MODE) == TIM_OCMODE_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_TOGGLE) || \
+ ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_FORCED_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \
+ ((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM2))
+#define IS_TIM_REMAP(__TIM_REMAP__) (((__TIM_REMAP__) == TIM_TIM2_TIM8_TRGO)||\
+ ((__TIM_REMAP__) == TIM_TIM2_ETH_PTP)||\
+ ((__TIM_REMAP__) == TIM_TIM2_USBFS_SOF)||\
+ ((__TIM_REMAP__) == TIM_TIM2_USBHS_SOF)||\
+ ((__TIM_REMAP__) == TIM_TIM5_GPIO)||\
+ ((__TIM_REMAP__) == TIM_TIM5_LSI)||\
+ ((__TIM_REMAP__) == TIM_TIM5_LSE)||\
+ ((__TIM_REMAP__) == TIM_TIM5_RTC)||\
+ ((__TIM_REMAP__) == TIM_TIM11_GPIO)||\
+ ((__TIM_REMAP__) == TIM_TIM11_SPDIFRX)||\
+ ((__TIM_REMAP__) == TIM_TIM11_HSE)||\
+ ((__TIM_REMAP__) == TIM_TIM11_MCO1))
+#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFF)
+#define IS_TIM_BREAK_FILTER(__FILTER__) ((__FILTER__) <= 0xF)
+#define IS_TIM_CLEARINPUT_SOURCE(MODE) (((MODE) == TIM_CLEARINPUTSOURCE_ETR) || \
+ ((MODE) == TIM_CLEARINPUTSOURCE_NONE))
+#define IS_TIM_BREAK2_STATE(STATE) (((STATE) == TIM_BREAK2_ENABLE) || \
+ ((STATE) == TIM_BREAK2_DISABLE))
+#define IS_TIM_BREAK2_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAK2POLARITY_LOW) || \
+ ((__POLARITY__) == TIM_BREAK2POLARITY_HIGH))
+#define IS_TIM_GROUPCH5(OCREF) ((((OCREF) & 0x1FFFFFFF) == 0x00000000))
+#define IS_TIM_TRGO2_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO2_RESET) || \
+ ((SOURCE) == TIM_TRGO2_ENABLE) || \
+ ((SOURCE) == TIM_TRGO2_UPDATE) || \
+ ((SOURCE) == TIM_TRGO2_OC1) || \
+ ((SOURCE) == TIM_TRGO2_OC1REF) || \
+ ((SOURCE) == TIM_TRGO2_OC2REF) || \
+ ((SOURCE) == TIM_TRGO2_OC3REF) || \
+ ((SOURCE) == TIM_TRGO2_OC3REF) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF) || \
+ ((SOURCE) == TIM_TRGO2_OC6REF) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISINGFALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC6REF_RISINGFALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING))
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+ ((MODE) == TIM_SLAVEMODE_RESET) || \
+ ((MODE) == TIM_SLAVEMODE_GATED) || \
+ ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+ ((MODE) == TIM_SLAVEMODE_EXTERNAL1) || \
+ ((MODE) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER))
+
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \
+ ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2))
+
+#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \
+ ((__SOURCE__) == TIM_BREAKINPUTSOURCE_DFSDM))
+
+#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \
+ ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE))
+
+#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \
+ ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH))
+
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Functions TIMEx Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h
new file mode 100644
index 00000000..f8ddab7b
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h
@@ -0,0 +1,1219 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_uart.h
+ * @author MCD Application Team
+ * @brief Header file of UART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_UART_H
+#define __STM32F7xx_HAL_UART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup UART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Types UART Exported Types
+ * @{
+ */
+
+/**
+ * @brief UART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
+ The baud rate register is computed using the following formula:
+ - If oversampling is 16 or in LIN mode,
+ Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate)))
+ - If oversampling is 8,
+ Baud Rate Register[15:4] = ((2 * PCLKx) / ((huart->Init.BaudRate)))[15:4]
+ Baud Rate Register[3] = 0
+ Baud Rate Register[2:0] = (((2 * PCLKx) / ((huart->Init.BaudRate)))[3:0]) >> 1 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref UARTEx_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref UART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref UART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref UART_Mode */
+
+ uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled
+ or disabled.
+ This parameter can be a value of @ref UART_Hardware_Flow_Control */
+
+ uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
+ This parameter can be a value of @ref UART_Over_Sampling */
+
+ uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
+ Selecting the single sample method increases the receiver tolerance to clock
+ deviations. This parameter can be a value of @ref UART_OneBit_Sampling */
+}UART_InitTypeDef;
+
+/**
+ * @brief UART Advanced Features initialization structure definition
+ */
+typedef struct
+{
+ uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several
+ Advanced Features may be initialized at the same time .
+ This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type */
+
+ uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
+ This parameter can be a value of @ref UART_Tx_Inv */
+
+ uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
+ This parameter can be a value of @ref UART_Rx_Inv */
+
+ uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
+ vs negative/inverted logic).
+ This parameter can be a value of @ref UART_Data_Inv */
+
+ uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
+ This parameter can be a value of @ref UART_Rx_Tx_Swap */
+
+ uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
+ This parameter can be a value of @ref UART_Overrun_Disable */
+
+ uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
+ This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error */
+
+ uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled.
+ This parameter can be a value of @ref UART_AutoBaudRate_Enable */
+
+ uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate
+ detection is carried out.
+ This parameter can be a value of @ref UART_AutoBaud_Rate_Mode */
+
+ uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
+ This parameter can be a value of @ref UART_MSB_First */
+} UART_AdvFeatureInitTypeDef;
+
+
+
+/**
+ * @brief HAL UART State structures definition
+ * @note HAL UART State value is a combination of 2 different substates: gState and RxState.
+ * - gState contains UART state information related to global Handle management
+ * and also information related to Tx operations.
+ * gState value coding follow below described bitmap :
+ * b7-b6 Error information
+ * 00 : No Error
+ * 01 : (Not Used)
+ * 10 : Timeout
+ * 11 : Error
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP not initialized. HAL UART Init function already called)
+ * b4-b3 (not used)
+ * xx : Should be set to 00
+ * b2 Intrinsic process state
+ * 0 : Ready
+ * 1 : Busy (IP busy with some configuration or internal operations)
+ * b1 (not used)
+ * x : Should be set to 0
+ * b0 Tx state
+ * 0 : Ready (no Tx operation ongoing)
+ * 1 : Busy (Tx operation ongoing)
+ * - RxState contains information related to Rx operations.
+ * RxState value coding follow below described bitmap :
+ * b7-b6 (not used)
+ * xx : Should be set to 00
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP not initialized)
+ * b4-b2 (not used)
+ * xxx : Should be set to 000
+ * b1 Rx state
+ * 0 : Ready (no Rx operation ongoing)
+ * 1 : Busy (Rx operation ongoing)
+ * b0 (not used)
+ * x : Should be set to 0.
+ */
+typedef enum
+{
+ HAL_UART_STATE_RESET = 0x00U, /*!< Peripheral is not initialized
+ Value is allowed for gState and RxState */
+ HAL_UART_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
+ Value is allowed for gState and RxState */
+ HAL_UART_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
+ Value is allowed for gState only */
+ HAL_UART_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
+ Value is allowed for gState only */
+ HAL_UART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
+ Value is allowed for RxState only */
+ HAL_UART_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
+ Not to be used for neither gState nor RxState.
+ Value is result of combination (Or) between gState and RxState values */
+ HAL_UART_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
+ Value is allowed for gState only */
+ HAL_UART_STATE_ERROR = 0xE0U /*!< Error
+ Value is allowed for gState only */
+}HAL_UART_StateTypeDef;
+
+/**
+ * @brief UART clock sources definition
+ */
+typedef enum
+{
+ UART_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */
+ UART_CLOCKSOURCE_PCLK2 = 0x01U, /*!< PCLK2 clock source */
+ UART_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */
+ UART_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */
+ UART_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */
+ UART_CLOCKSOURCE_UNDEFINED = 0x10U /*!< Undefined clock source */
+}UART_ClockSourceTypeDef;
+
+/**
+ * @brief UART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /*!< UART registers base address */
+
+ UART_InitTypeDef Init; /*!< UART communication parameters */
+
+ UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< UART Tx Transfer size */
+
+ __IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< UART Rx Transfer size */
+
+ __IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
+
+ uint16_t Mask; /*!< UART Rx RDR register mask */
+
+ DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management
+ and also related to Tx operations.
+ This parameter can be a value of @ref HAL_UART_StateTypeDef */
+
+ __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations.
+ This parameter can be a value of @ref HAL_UART_StateTypeDef */
+
+ __IO uint32_t ErrorCode; /*!< UART Error code */
+
+}UART_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UART_Exported_Constants UART Exported Constants
+ * @{
+ */
+/** @defgroup UART_Error_Definition UART Error Definition
+ * @{
+ */
+#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_UART_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
+#define HAL_UART_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
+#define HAL_UART_ERROR_FE ((uint32_t)0x00000004U) /*!< frame error */
+#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
+#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+/**
+ * @}
+ */
+/** @defgroup UART_Stop_Bits UART Number of Stop Bits
+ * @{
+ */
+#define UART_STOPBITS_1 ((uint32_t)0x00000000U)
+#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Parity UART Parity
+ * @{
+ */
+#define UART_PARITY_NONE ((uint32_t)0x00000000U)
+#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
+ * @{
+ */
+#define UART_HWCONTROL_NONE ((uint32_t)0x00000000U)
+#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
+#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
+#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Mode UART Transfer Mode
+ * @{
+ */
+#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+ * @}
+ */
+
+ /** @defgroup UART_State UART State
+ * @{
+ */
+#define UART_STATE_DISABLE ((uint32_t)0x00000000U)
+#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Over_Sampling UART Over Sampling
+ * @{
+ */
+#define UART_OVERSAMPLING_16 ((uint32_t)0x00000000U)
+#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
+/**
+ * @}
+ */
+
+/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method
+ * @{
+ */
+#define UART_ONE_BIT_SAMPLE_DISABLE ((uint32_t)0x00000000U)
+#define UART_ONE_BIT_SAMPLE_ENABLE ((uint32_t)USART_CR3_ONEBIT)
+/**
+ * @}
+ */
+
+/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode
+ * @{
+ */
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000U)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Receiver_TimeOut UART Receiver TimeOut
+ * @{
+ */
+#define UART_RECEIVER_TIMEOUT_DISABLE ((uint32_t)0x00000000U)
+#define UART_RECEIVER_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN)
+/**
+ * @}
+ */
+
+/** @defgroup UART_LIN UART Local Interconnection Network mode
+ * @{
+ */
+#define UART_LIN_DISABLE ((uint32_t)0x00000000U)
+#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN)
+/**
+ * @}
+ */
+
+/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection
+ * @{
+ */
+#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000U)
+#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL)
+/**
+ * @}
+ */
+
+/** @defgroup UART_DMA_Tx UART DMA Tx
+ * @{
+ */
+#define UART_DMA_TX_DISABLE ((uint32_t)0x00000000U)
+#define UART_DMA_TX_ENABLE ((uint32_t)USART_CR3_DMAT)
+/**
+ * @}
+ */
+
+/** @defgroup UART_DMA_Rx UART DMA Rx
+ * @{
+ */
+#define UART_DMA_RX_DISABLE ((uint32_t)0x0000U)
+#define UART_DMA_RX_ENABLE ((uint32_t)USART_CR3_DMAR)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection
+ * @{
+ */
+#define UART_HALF_DUPLEX_DISABLE ((uint32_t)0x0000U)
+#define UART_HALF_DUPLEX_ENABLE ((uint32_t)USART_CR3_HDSEL)
+/**
+ * @}
+ */
+
+/** @defgroup UART_WakeUp_Methods UART WakeUp Methods
+ * @{
+ */
+#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000U)
+#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Request_Parameters UART Request Parameters
+ * @{
+ */
+#define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
+#define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /*!< Send Break Request */
+#define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /*!< Mute Mode Request */
+#define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type
+ * @{
+ */
+#define UART_ADVFEATURE_NO_INIT ((uint32_t)0x00000000U)
+#define UART_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001U)
+#define UART_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002U)
+#define UART_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004U)
+#define UART_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008U)
+#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010U)
+#define UART_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020U)
+#define UART_ADVFEATURE_AUTOBAUDRATE_INIT ((uint32_t)0x00000040U)
+#define UART_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080U)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion
+ * @{
+ */
+#define UART_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000U)
+#define UART_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion
+ * @{
+ */
+#define UART_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000U)
+#define UART_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion
+ * @{
+ */
+#define UART_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000U)
+#define UART_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap
+ * @{
+ */
+#define UART_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000U)
+#define UART_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable
+ * @{
+ */
+#define UART_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000U)
+#define UART_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS)
+/**
+ * @}
+ */
+
+/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable
+ * @{
+ */
+#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE ((uint32_t)0x00000000U)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE ((uint32_t)USART_CR2_ABREN)
+/**
+ * @}
+ */
+
+/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error
+ * @{
+ */
+#define UART_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000U)
+#define UART_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE)
+/**
+ * @}
+ */
+
+/** @defgroup UART_MSB_First UART Advanced Feature MSB First
+ * @{
+ */
+#define UART_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000U)
+#define UART_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable
+ * @{
+ */
+#define UART_ADVFEATURE_MUTEMODE_DISABLE ((uint32_t)0x00000000U)
+#define UART_ADVFEATURE_MUTEMODE_ENABLE ((uint32_t)USART_CR1_MME)
+/**
+ * @}
+ */
+
+/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register
+ * @{
+ */
+#define UART_CR2_ADDRESS_LSB_POS ((uint32_t) 24U)
+/**
+ * @}
+ */
+
+/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity
+ * @{
+ */
+#define UART_DE_POLARITY_HIGH ((uint32_t)0x00000000U)
+#define UART_DE_POLARITY_LOW ((uint32_t)USART_CR3_DEP)
+/**
+ * @}
+ */
+
+/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register
+ * @{
+ */
+#define UART_CR1_DEAT_ADDRESS_LSB_POS ((uint32_t) 21U)
+/**
+ * @}
+ */
+
+/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register
+ * @{
+ */
+#define UART_CR1_DEDT_ADDRESS_LSB_POS ((uint32_t) 16U)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask
+ * @{
+ */
+#define UART_IT_MASK ((uint32_t)0x001FU)
+/**
+ * @}
+ */
+
+/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value
+ * @{
+ */
+#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFFU
+/**
+ * @}
+ */
+
+/** @defgroup UART_Flags UART Status Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define UART_FLAG_TEACK ((uint32_t)0x00200000U)
+#define UART_FLAG_SBKF ((uint32_t)0x00040000U)
+#define UART_FLAG_CMF ((uint32_t)0x00020000U)
+#define UART_FLAG_BUSY ((uint32_t)0x00010000U)
+#define UART_FLAG_ABRF ((uint32_t)0x00008000U)
+#define UART_FLAG_ABRE ((uint32_t)0x00004000U)
+#define UART_FLAG_EOBF ((uint32_t)0x00001000U)
+#define UART_FLAG_RTOF ((uint32_t)0x00000800U)
+#define UART_FLAG_CTS ((uint32_t)0x00000400U)
+#define UART_FLAG_CTSIF ((uint32_t)0x00000200U)
+#define UART_FLAG_LBDF ((uint32_t)0x00000100U)
+#define UART_FLAG_TXE ((uint32_t)0x00000080U)
+#define UART_FLAG_TC ((uint32_t)0x00000040U)
+#define UART_FLAG_RXNE ((uint32_t)0x00000020U)
+#define UART_FLAG_IDLE ((uint32_t)0x00000010U)
+#define UART_FLAG_ORE ((uint32_t)0x00000008U)
+#define UART_FLAG_NE ((uint32_t)0x00000004U)
+#define UART_FLAG_FE ((uint32_t)0x00000002U)
+#define UART_FLAG_PE ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Interrupt_definition UART Interrupts Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+#define UART_IT_PE ((uint32_t)0x0028U)
+#define UART_IT_TXE ((uint32_t)0x0727U)
+#define UART_IT_TC ((uint32_t)0x0626U)
+#define UART_IT_RXNE ((uint32_t)0x0525U)
+#define UART_IT_IDLE ((uint32_t)0x0424U)
+#define UART_IT_LBD ((uint32_t)0x0846U)
+#define UART_IT_CTS ((uint32_t)0x096AU)
+#define UART_IT_CM ((uint32_t)0x112EU)
+
+/** Elements values convention: 000000000XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ */
+#define UART_IT_ERR ((uint32_t)0x0060U)
+
+/** Elements values convention: 0000ZZZZ00000000b
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ */
+#define UART_IT_ORE ((uint32_t)0x0300U)
+#define UART_IT_NE ((uint32_t)0x0200U)
+#define UART_IT_FE ((uint32_t)0x0100U)
+/**
+ * @}
+ */
+
+/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags
+ * @{
+ */
+#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define UART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
+#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */
+#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
+#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
+#define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
+#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup UART_Exported_Macros UART Exported Macros
+ * @{
+ */
+
+/** @brief Reset UART handle state
+ * @param __HANDLE__ UART handle.
+ * @retval None
+ */
+#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_UART_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \
+ } while(0)
+
+/** @brief Flush the UART Data registers
+ * @param __HANDLE__ specifies the UART Handle.
+ */
+#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \
+ SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \
+ } while(0)
+
+/** @brief Clears the specified UART ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @param __FLAG__ specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg UART_CLEAR_PEF: Parity Error Clear Flag
+ * @arg UART_CLEAR_FEF: Framing Error Clear Flag
+ * @arg UART_CLEAR_NEF: Noise detected Clear Flag
+ * @arg UART_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg UART_CLEAR_IDLEF: IDLE line detected Clear Flag
+ * @arg UART_CLEAR_TCF: Transmission Complete Clear Flag
+ * @arg UART_CLEAR_LBDF: LIN Break Detection Clear Flag
+ * @arg UART_CLEAR_CTSF: CTS Interrupt Clear Flag
+ * @arg UART_CLEAR_RTOF: Receiver Time Out Clear Flag
+ * @arg UART_CLEAR_EOBF: End Of Block Clear Flag
+ * @arg UART_CLEAR_CMF: Character Match Clear Flag
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_IT(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__FLAG__))
+
+/** @brief Clear the UART PE pending flag.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) __HAL_UART_CLEAR_IT((__HANDLE__),UART_CLEAR_PEF)
+
+/** @brief Clear the UART FE pending flag.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_IT((__HANDLE__),UART_CLEAR_FEF)
+
+/** @brief Clear the UART NE pending flag.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_IT((__HANDLE__),UART_CLEAR_NEF)
+
+/** @brief Clear the UART ORE pending flag.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_IT((__HANDLE__),UART_CLEAR_OREF)
+
+/** @brief Clear the UART IDLE pending flag.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_IT((__HANDLE__),UART_CLEAR_IDLEF)
+
+/** @brief Checks whether the specified UART flag is set or not.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg UART_FLAG_REACK: Receive enable acknowledge flag
+ * @arg UART_FLAG_TEACK: Transmit enable acknowledge flag
+ * @arg UART_FLAG_WUF: Wake up from stop mode flag
+ * @arg UART_FLAG_RWU: Receiver wake up flag (is the UART in mute mode)
+ * @arg UART_FLAG_SBKF: Send Break flag
+ * @arg UART_FLAG_CMF: Character match flag
+ * @arg UART_FLAG_BUSY: Busy flag
+ * @arg UART_FLAG_ABRF: Auto Baud rate detection flag
+ * @arg UART_FLAG_ABRE: Auto Baud rate detection error flag
+ * @arg UART_FLAG_EOBF: End of block flag
+ * @arg UART_FLAG_RTOF: Receiver timeout flag
+ * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
+ * @arg UART_FLAG_LBD: LIN Break detection flag
+ * @arg UART_FLAG_TXE: Transmit data register empty flag
+ * @arg UART_FLAG_TC: Transmission Complete flag
+ * @arg UART_FLAG_RXNE: Receive data register not empty flag
+ * @arg UART_FLAG_IDLE: Idle Line detection flag
+ * @arg UART_FLAG_ORE: OverRun Error flag
+ * @arg UART_FLAG_NE: Noise Error flag
+ * @arg UART_FLAG_FE: Framing Error flag
+ * @arg UART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Enables the specified UART interrupt.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @param __INTERRUPT__ specifies the UART interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_WUF: Wakeup from stop mode interrupt
+ * @arg UART_IT_CM: Character match interrupt
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))))
+
+
+/** @brief Disables the specified UART interrupt.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @param __INTERRUPT__ specifies the UART interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CM: Character match interrupt
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))))
+
+/** @brief Checks whether the specified UART interrupt has occurred or not.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @param __IT__ specifies the UART interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CM: Character match interrupt
+ * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_ORE: OverRun Error interrupt
+ * @arg UART_IT_NE: Noise Error interrupt
+ * @arg UART_IT_FE: Framing Error interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
+
+/** @brief Checks whether the specified UART interrupt source is enabled.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @param __IT__ specifies the UART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_ORE: OverRun Error interrupt
+ * @arg UART_IT_NE: Noise Error interrupt
+ * @arg UART_IT_FE: Framing Error interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & UART_IT_MASK)))
+
+/** @brief Set a specific UART request flag.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @param __REQ__ specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg UART_AUTOBAUD_REQUEST: Auto-Baud Rate Request
+ * @arg UART_SENDBREAK_REQUEST: Send Break Request
+ * @arg UART_MUTE_MODE_REQUEST: Mute Mode Request
+ * @arg UART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg UART_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+ * @retval None
+ */
+#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint32_t)(__REQ__))
+
+/** @brief Enables the UART one bit sample method
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief Disables the UART one bit sample method
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT))
+
+/** @brief Enable UART
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable UART
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/** @brief Enable CTS flow control
+ * This macro allows to enable CTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__ specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \
+ } while(0)
+
+/** @brief Disable CTS flow control
+ * This macro allows to disable CTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__ specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
+ do{ \
+ CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
+ } while(0)
+
+/** @brief Enable RTS flow control
+ * This macro allows to enable RTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__ specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
+ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \
+ } while(0)
+
+/** @brief Disable RTS flow control
+ * This macro allows to disable RTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__ specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
+ do{ \
+ CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
+ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
+ } while(0)
+
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup UART_Private_Macros UART Private Macros
+ * @{
+ */
+/** @brief BRR division operation to set BRR register with LPUART
+ * @param _PCLK_ LPUART clock
+ * @param _BAUD_ Baud rate set by the user
+ * @retval Division result
+ */
+#define UART_DIV_LPUART(_PCLK_, _BAUD_) ((((_PCLK_)*256)+((_BAUD_)/2))/((_BAUD_)))
+
+/** @brief BRR division operation to set BRR register in 8-bit oversampling mode
+ * @param _PCLK_ UART clock
+ * @param _BAUD_ Baud rate set by the user
+ * @retval Division result
+ */
+#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) ((((_PCLK_)*2)+((_BAUD_)/2))/((_BAUD_)))
+
+/** @brief BRR division operation to set BRR register in 16-bit oversampling mode
+ * @param _PCLK_ UART clock
+ * @param _BAUD_ Baud rate set by the user
+ * @retval Division result
+ */
+#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) ((((_PCLK_))+((_BAUD_)/2))/((_BAUD_)))
+
+/** @brief Check UART Baud rate
+ * @param BAUDRATE Baudrate specified by the user
+ * The maximum Baud Rate is derived from the maximum clock on F7 (i.e. 216 MHz)
+ * divided by the smallest oversampling used on the USART (i.e. 8)
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 9000001)
+
+/** @brief Check UART assertion time
+ * @param TIME 5-bit value assertion time
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_UART_ASSERTIONTIME(TIME) ((TIME) <= 0x1F)
+
+/** @brief Check UART deassertion time
+ * @param TIME 5-bit value deassertion time
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_UART_DEASSERTIONTIME(TIME) ((TIME) <= 0x1F)
+
+#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
+ ((STOPBITS) == UART_STOPBITS_2))
+
+#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
+ ((PARITY) == UART_PARITY_EVEN) || \
+ ((PARITY) == UART_PARITY_ODD))
+
+#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
+ (((CONTROL) == UART_HWCONTROL_NONE) || \
+ ((CONTROL) == UART_HWCONTROL_RTS) || \
+ ((CONTROL) == UART_HWCONTROL_CTS) || \
+ ((CONTROL) == UART_HWCONTROL_RTS_CTS))
+
+#define IS_UART_MODE(MODE) ((((MODE) & (~((uint32_t)(UART_MODE_TX_RX)))) == (uint32_t)0x00) && ((MODE) != (uint32_t)0x00))
+
+#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
+ ((STATE) == UART_STATE_ENABLE))
+
+#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
+ ((SAMPLING) == UART_OVERSAMPLING_8))
+
+#define IS_UART_ONE_BIT_SAMPLE(ONEBIT) (((ONEBIT) == UART_ONE_BIT_SAMPLE_DISABLE) || \
+ ((ONEBIT) == UART_ONE_BIT_SAMPLE_ENABLE))
+
+#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME))
+
+#define IS_UART_RECEIVER_TIMEOUT(TIMEOUT) (((TIMEOUT) == UART_RECEIVER_TIMEOUT_DISABLE) || \
+ ((TIMEOUT) == UART_RECEIVER_TIMEOUT_ENABLE))
+
+#define IS_UART_LIN(LIN) (((LIN) == UART_LIN_DISABLE) || \
+ ((LIN) == UART_LIN_ENABLE))
+
+#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
+ ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
+
+#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
+ ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
+
+#define IS_UART_DMA_TX(DMATX) (((DMATX) == UART_DMA_TX_DISABLE) || \
+ ((DMATX) == UART_DMA_TX_ENABLE))
+
+#define IS_UART_DMA_RX(DMARX) (((DMARX) == UART_DMA_RX_DISABLE) || \
+ ((DMARX) == UART_DMA_RX_ENABLE))
+
+#define IS_UART_HALF_DUPLEX(HDSEL) (((HDSEL) == UART_HALF_DUPLEX_DISABLE) || \
+ ((HDSEL) == UART_HALF_DUPLEX_ENABLE))
+
+#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \
+ ((PARAM) == UART_SENDBREAK_REQUEST) || \
+ ((PARAM) == UART_MUTE_MODE_REQUEST) || \
+ ((PARAM) == UART_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == UART_TXDATA_FLUSH_REQUEST))
+
+#define IS_UART_ADVFEATURE_INIT(INIT) ((INIT) <= (UART_ADVFEATURE_NO_INIT | \
+ UART_ADVFEATURE_TXINVERT_INIT | \
+ UART_ADVFEATURE_RXINVERT_INIT | \
+ UART_ADVFEATURE_DATAINVERT_INIT | \
+ UART_ADVFEATURE_SWAP_INIT | \
+ UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
+ UART_ADVFEATURE_DMADISABLEONERROR_INIT | \
+ UART_ADVFEATURE_AUTOBAUDRATE_INIT | \
+ UART_ADVFEATURE_MSBFIRST_INIT))
+
+#define IS_UART_ADVFEATURE_TXINV(TXINV) (((TXINV) == UART_ADVFEATURE_TXINV_DISABLE) || \
+ ((TXINV) == UART_ADVFEATURE_TXINV_ENABLE))
+
+#define IS_UART_ADVFEATURE_RXINV(RXINV) (((RXINV) == UART_ADVFEATURE_RXINV_DISABLE) || \
+ ((RXINV) == UART_ADVFEATURE_RXINV_ENABLE))
+
+#define IS_UART_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == UART_ADVFEATURE_DATAINV_DISABLE) || \
+ ((DATAINV) == UART_ADVFEATURE_DATAINV_ENABLE))
+
+#define IS_UART_ADVFEATURE_SWAP(SWAP) (((SWAP) == UART_ADVFEATURE_SWAP_DISABLE) || \
+ ((SWAP) == UART_ADVFEATURE_SWAP_ENABLE))
+
+#define IS_UART_OVERRUN(OVERRUN) (((OVERRUN) == UART_ADVFEATURE_OVERRUN_ENABLE) || \
+ ((OVERRUN) == UART_ADVFEATURE_OVERRUN_DISABLE))
+
+#define IS_UART_ADVFEATURE_AUTOBAUDRATE(AUTOBAUDRATE) (((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \
+ ((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE))
+
+#define IS_UART_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \
+ ((DMA) == UART_ADVFEATURE_DMA_DISABLEONRXERROR))
+
+#define IS_UART_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \
+ ((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_ENABLE))
+
+#define IS_UART_MUTE_MODE(MUTE) (((MUTE) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \
+ ((MUTE) == UART_ADVFEATURE_MUTEMODE_ENABLE))
+
+#define IS_UART_DE_POLARITY(POLARITY) (((POLARITY) == UART_DE_POLARITY_HIGH) || \
+ ((POLARITY) == UART_DE_POLARITY_LOW))
+
+/**
+ * @}
+ */
+/* Include UART HAL Extension module */
+#include "stm32f7xx_hal_uart_ex.h"
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup UART_Exported_Functions UART Exported Functions
+ * @{
+ */
+
+/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
+HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, uint32_t DeassertionTime);
+HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
+void HAL_UART_MspInit(UART_HandleTypeDef *huart);
+void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
+
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength);
+HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart);
+void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions
+ * @{
+ */
+
+/* Peripheral State and Errors functions **************************************************/
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
+uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions -----------------------------------------------------------*/
+/** @addtogroup UART_Private_Functions UART Private Functions
+ * @{
+ */
+
+HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout);
+void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_UART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h
new file mode 100644
index 00000000..dfea19ee
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h
@@ -0,0 +1,363 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_uart_ex.h
+ * @author MCD Application Team
+ * @brief Header file of UART HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_UART_EX_H
+#define __STM32F7xx_HAL_UART_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup UARTEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants
+ * @{
+ */
+
+/** @defgroup UARTEx_Word_Length UARTEx Word Length
+ * @{
+ */
+#define UART_WORDLENGTH_7B ((uint32_t)USART_CR1_M_1)
+#define UART_WORDLENGTH_8B ((uint32_t)0x0000U)
+#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M_0)
+#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \
+ ((__LENGTH__) == UART_WORDLENGTH_8B) || \
+ ((__LENGTH__) == UART_WORDLENGTH_9B))
+#define IS_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B))
+/**
+ * @}
+ */
+
+
+/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length
+ * @{
+ */
+#define UART_ADDRESS_DETECT_4B ((uint32_t)0x00000000U)
+#define UART_ADDRESS_DETECT_7B ((uint32_t)USART_CR2_ADDM7)
+#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \
+ ((__ADDRESS__) == UART_ADDRESS_DETECT_7B))
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup UARTEx_Exported_Macros UARTEx Exported Macros
+ * @{
+ */
+
+/** @brief Reports the UART clock source.
+ * @param __HANDLE__ specifies the UART Handle
+ * @param __CLOCKSOURCE__ output variable
+ * @retval UART clocking source, written in __CLOCKSOURCE__.
+ */
+#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK2: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == UART4) \
+ { \
+ switch(__HAL_RCC_GET_UART4_SOURCE()) \
+ { \
+ case RCC_UART4CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_UART4CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_UART4CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_UART4CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ break; \
+ } \
+ } \
+ else if ((__HANDLE__)->Instance == UART5) \
+ { \
+ switch(__HAL_RCC_GET_UART5_SOURCE()) \
+ { \
+ case RCC_UART5CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_UART5CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_UART5CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_UART5CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ switch(__HAL_RCC_GET_USART6_SOURCE()) \
+ { \
+ case RCC_USART6CLKSOURCE_PCLK2: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \
+ break; \
+ case RCC_USART6CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART6CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART6CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ break; \
+ } \
+ } \
+ else if ((__HANDLE__)->Instance == UART7) \
+ { \
+ switch(__HAL_RCC_GET_UART7_SOURCE()) \
+ { \
+ case RCC_UART7CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_UART7CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_UART7CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_UART7CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ break; \
+ } \
+ } \
+ else if ((__HANDLE__)->Instance == UART8) \
+ { \
+ switch(__HAL_RCC_GET_UART8_SOURCE()) \
+ { \
+ case RCC_UART8CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_UART8CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_UART8CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_UART8CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ break; \
+ } \
+ } \
+ } while(0)
+
+/** @brief Reports the UART mask to apply to retrieve the received data
+ * according to the word length and to the parity bits activation.
+ * If PCE = 1, the parity bit is not included in the data extracted
+ * by the reception API().
+ * This masking operation is not carried out in the case of
+ * DMA transfers.
+ * @param __HANDLE__ specifies the UART Handle
+ * @retval mask to apply to UART RDR register value.
+ */
+#define UART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x003F ; \
+ } \
+ } \
+} while(0)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup UARTEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup UARTEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, uint32_t DeassertionTime);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup UARTEx_Exported_Functions_Group3
+ * @{
+ */
+
+/* Peripheral Control functions **********************************************/
+HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_UART_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c
new file mode 100644
index 00000000..c280e154
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c
@@ -0,0 +1,624 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal.c
+ * @author MCD Application Team
+ * @brief HAL module driver.
+ * This is the common part of the HAL initialization
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The common HAL driver contains a set of generic and common APIs that can be
+ used by the PPP peripheral drivers and the user to start using the HAL.
+ [..]
+ The HAL contains two APIs' categories:
+ (+) Common HAL APIs
+ (+) Services HAL APIs
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup HAL HAL
+ * @brief HAL module driver.
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup HAL_Private_Constants
+ * @{
+ */
+/**
+ * @brief STM32F7xx HAL Driver version number V1.2.5
+ */
+#define __STM32F7xx_HAL_VERSION_MAIN (0x01) /*!< [31:24] main version */
+#define __STM32F7xx_HAL_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */
+#define __STM32F7xx_HAL_VERSION_SUB2 (0x05) /*!< [15:8] sub2 version */
+#define __STM32F7xx_HAL_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F7xx_HAL_VERSION ((__STM32F7xx_HAL_VERSION_MAIN << 24)\
+ |(__STM32F7xx_HAL_VERSION_SUB1 << 16)\
+ |(__STM32F7xx_HAL_VERSION_SUB2 << 8 )\
+ |(__STM32F7xx_HAL_VERSION_RC))
+
+#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup HAL_Private_Variables
+ * @{
+ */
+__IO uint32_t uwTick;
+uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */
+HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Functions HAL Exported Functions
+ * @{
+ */
+
+/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initializes the Flash interface the NVIC allocation and initial clock
+ configuration. It initializes the systick also when timeout is needed
+ and the backup domain when enabled.
+ (+) De-Initializes common part of the HAL.
+ (+) Configure the time base source to have 1ms time base with a dedicated
+ Tick interrupt priority.
+ (++) SysTick timer is used by default as source of time base, but user
+ can eventually implement his proper time base source (a general purpose
+ timer for example or other time source), keeping in mind that Time base
+ duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
+ handled in milliseconds basis.
+ (++) Time base configuration function (HAL_InitTick ()) is called automatically
+ at the beginning of the program after reset by HAL_Init() or at any time
+ when clock is configured, by HAL_RCC_ClockConfig().
+ (++) Source of time base is configured to generate interrupts at regular
+ time intervals. Care must be taken if HAL_Delay() is called from a
+ peripheral ISR process, the Tick interrupt line must have higher priority
+ (numerically lower) than the peripheral interrupt. Otherwise the caller
+ ISR process will be blocked.
+ (++) functions affecting time base configurations are declared as __weak
+ to make override possible in case of other implementations in user file.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function is used to initialize the HAL Library; it must be the first
+ * instruction to be executed in the main program (before to call any other
+ * HAL function), it performs the following:
+ * Configure the Flash prefetch, and instruction cache through ART accelerator.
+ * Configures the SysTick to generate an interrupt each 1 millisecond,
+ * which is clocked by the HSI (at this stage, the clock is not yet
+ * configured and thus the system is running from the internal HSI at 16 MHz).
+ * Set NVIC Group Priority to 4.
+ * Calls the HAL_MspInit() callback function defined in user file
+ * "stm32f7xx_hal_msp.c" to do the global low level hardware initialization
+ *
+ * @note SysTick is used as time base for the HAL_Delay() function, the application
+ * need to ensure that the SysTick time base is always set to 1 millisecond
+ * to have correct HAL operation.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_Init(void)
+{
+ /* Configure Instruction cache through ART accelerator */
+#if (ART_ACCLERATOR_ENABLE != 0)
+ __HAL_FLASH_ART_ENABLE();
+#endif /* ART_ACCLERATOR_ENABLE */
+
+ /* Configure Flash prefetch */
+#if (PREFETCH_ENABLE != 0U)
+ __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
+#endif /* PREFETCH_ENABLE */
+
+ /* Set Interrupt Group Priority */
+ HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+
+ /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */
+ HAL_InitTick(TICK_INT_PRIORITY);
+
+ /* Init the low level hardware */
+ HAL_MspInit();
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief This function de-Initializes common part of the HAL and stops the systick.
+ * This function is optional.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DeInit(void)
+{
+ /* Reset of all peripherals */
+ __HAL_RCC_APB1_FORCE_RESET();
+ __HAL_RCC_APB1_RELEASE_RESET();
+
+ __HAL_RCC_APB2_FORCE_RESET();
+ __HAL_RCC_APB2_RELEASE_RESET();
+
+ __HAL_RCC_AHB1_FORCE_RESET();
+ __HAL_RCC_AHB1_RELEASE_RESET();
+
+ __HAL_RCC_AHB2_FORCE_RESET();
+ __HAL_RCC_AHB2_RELEASE_RESET();
+
+ __HAL_RCC_AHB3_FORCE_RESET();
+ __HAL_RCC_AHB3_RELEASE_RESET();
+
+ /* De-Init the low level hardware */
+ HAL_MspDeInit();
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the MSP.
+ * @retval None
+ */
+__weak void HAL_MspInit(void)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the MSP.
+ * @retval None
+ */
+__weak void HAL_MspDeInit(void)
+{
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function configures the source of the time base.
+ * The time source is configured to have 1ms time base with a dedicated
+ * Tick interrupt priority.
+ * @note This function is called automatically at the beginning of program after
+ * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig().
+ * @note In the default implementation, SysTick timer is the source of time base.
+ * It is used to generate interrupts at regular time intervals.
+ * Care must be taken if HAL_Delay() is called from a peripheral ISR process,
+ * The SysTick interrupt must have higher priority (numerically lower)
+ * than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
+ * The function is declared as __weak to be overwritten in case of other
+ * implementation in user file.
+ * @param TickPriority Tick interrupt priority.
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
+{
+ /* Configure the SysTick to have interrupt in 1ms time basis*/
+ if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Configure the SysTick IRQ priority */
+ if (TickPriority < (1UL << __NVIC_PRIO_BITS))
+ {
+ HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U);
+ uwTickPrio = TickPriority;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions
+ * @brief HAL Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### HAL Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Provide a tick value in millisecond
+ (+) Provide a blocking delay in millisecond
+ (+) Suspend the time base source interrupt
+ (+) Resume the time base source interrupt
+ (+) Get the HAL API driver version
+ (+) Get the device identifier
+ (+) Get the device revision identifier
+ (+) Enable/Disable Debug module during SLEEP mode
+ (+) Enable/Disable Debug module during STOP mode
+ (+) Enable/Disable Debug module during STANDBY mode
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function is called to increment a global variable "uwTick"
+ * used as application time base.
+ * @note In the default implementation, this variable is incremented each 1ms
+ * in SysTick ISR.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval None
+ */
+__weak void HAL_IncTick(void)
+{
+ uwTick += uwTickFreq;
+}
+
+/**
+ * @brief Provides a tick value in millisecond.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval tick value
+ */
+__weak uint32_t HAL_GetTick(void)
+{
+ return uwTick;
+}
+
+/**
+ * @brief This function returns a tick priority.
+ * @retval tick priority
+ */
+uint32_t HAL_GetTickPrio(void)
+{
+ return uwTickPrio;
+}
+
+/**
+ * @brief Set new tick Freq.
+ * @retval Status
+ */
+HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ assert_param(IS_TICKFREQ(Freq));
+
+ if (uwTickFreq != Freq)
+ {
+ uwTickFreq = Freq;
+
+ /* Apply the new tick Freq */
+ status = HAL_InitTick(uwTickPrio);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Return tick frequency.
+ * @retval tick period in Hz
+ */
+HAL_TickFreqTypeDef HAL_GetTickFreq(void)
+{
+ return uwTickFreq;
+}
+
+/**
+ * @brief This function provides minimum delay (in milliseconds) based
+ * on variable incremented.
+ * @note In the default implementation , SysTick timer is the source of time base.
+ * It is used to generate interrupts at regular time intervals where uwTick
+ * is incremented.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @param Delay specifies the delay time length, in milliseconds.
+ * @retval None
+ */
+__weak void HAL_Delay(uint32_t Delay)
+{
+ uint32_t tickstart = HAL_GetTick();
+ uint32_t wait = Delay;
+
+ /* Add a freq to guarantee minimum wait */
+ if (wait < HAL_MAX_DELAY)
+ {
+ wait += (uint32_t)(uwTickFreq);
+ }
+
+ while ((HAL_GetTick() - tickstart) < wait)
+ {
+ }
+}
+
+/**
+ * @brief Suspend Tick increment.
+ * @note In the default implementation , SysTick timer is the source of time base. It is
+ * used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
+ * is called, the SysTick interrupt will be disabled and so Tick increment
+ * is suspended.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval None
+ */
+__weak void HAL_SuspendTick(void)
+{
+ /* Disable SysTick Interrupt */
+ SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk;
+}
+
+/**
+ * @brief Resume Tick increment.
+ * @note In the default implementation , SysTick timer is the source of time base. It is
+ * used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
+ * is called, the SysTick interrupt will be enabled and so Tick increment
+ * is resumed.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval None
+ */
+__weak void HAL_ResumeTick(void)
+{
+ /* Enable SysTick Interrupt */
+ SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk;
+}
+
+/**
+ * @brief Returns the HAL revision
+ * @retval version : 0xXYZR (8bits for each decimal, R for RC)
+ */
+uint32_t HAL_GetHalVersion(void)
+{
+ return __STM32F7xx_HAL_VERSION;
+}
+
+/**
+ * @brief Returns the device revision identifier.
+ * @retval Device revision identifier
+ */
+uint32_t HAL_GetREVID(void)
+{
+ return((DBGMCU->IDCODE) >> 16U);
+}
+
+/**
+ * @brief Returns the device identifier.
+ * @retval Device identifier
+ */
+uint32_t HAL_GetDEVID(void)
+{
+ return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
+}
+
+/**
+ * @brief Returns first word of the unique device identifier (UID based on 96 bits)
+ * @retval Device identifier
+ */
+uint32_t HAL_GetUIDw0(void)
+{
+ return(READ_REG(*((uint32_t *)UID_BASE)));
+}
+
+/**
+ * @brief Returns second word of the unique device identifier (UID based on 96 bits)
+ * @retval Device identifier
+ */
+uint32_t HAL_GetUIDw1(void)
+{
+ return(READ_REG(*((uint32_t *)(UID_BASE + 4U))));
+}
+
+/**
+ * @brief Returns third word of the unique device identifier (UID based on 96 bits)
+ * @retval Device identifier
+ */
+uint32_t HAL_GetUIDw2(void)
+{
+ return(READ_REG(*((uint32_t *)(UID_BASE + 8U))));
+}
+
+/**
+ * @brief Enable the Debug Module during SLEEP mode
+ * @retval None
+ */
+void HAL_DBGMCU_EnableDBGSleepMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+ * @brief Disable the Debug Module during SLEEP mode
+ * @retval None
+ */
+void HAL_DBGMCU_DisableDBGSleepMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+ * @brief Enable the Debug Module during STOP mode
+ * @retval None
+ */
+void HAL_DBGMCU_EnableDBGStopMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+ * @brief Disable the Debug Module during STOP mode
+ * @retval None
+ */
+void HAL_DBGMCU_DisableDBGStopMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+ * @brief Enable the Debug Module during STANDBY mode
+ * @retval None
+ */
+void HAL_DBGMCU_EnableDBGStandbyMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+ * @brief Disable the Debug Module during STANDBY mode
+ * @retval None
+ */
+void HAL_DBGMCU_DisableDBGStandbyMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+ * @brief Enables the I/O Compensation Cell.
+ * @note The I/O compensation cell can be used only when the device supply
+ * voltage ranges from 2.4 to 3.6 V.
+ * @retval None
+ */
+void HAL_EnableCompensationCell(void)
+{
+ SYSCFG->CMPCR |= SYSCFG_CMPCR_CMP_PD;
+}
+
+/**
+ * @brief Power-down the I/O Compensation Cell.
+ * @note The I/O compensation cell can be used only when the device supply
+ * voltage ranges from 2.4 to 3.6 V.
+ * @retval None
+ */
+void HAL_DisableCompensationCell(void)
+{
+ SYSCFG->CMPCR &= (uint32_t)~((uint32_t)SYSCFG_CMPCR_CMP_PD);
+}
+
+/**
+ * @brief Enables the FMC Memory Mapping Swapping.
+ *
+ * @note SDRAM is accessible at 0x60000000
+ * and NOR/RAM is accessible at 0xC0000000
+ *
+ * @retval None
+ */
+void HAL_EnableFMCMemorySwapping(void)
+{
+ SYSCFG->MEMRMP |= SYSCFG_MEMRMP_SWP_FMC_0;
+}
+
+/**
+ * @brief Disables the FMC Memory Mapping Swapping
+ *
+ * @note SDRAM is accessible at 0xC0000000 (default mapping)
+ * and NOR/RAM is accessible at 0x60000000 (default mapping)
+ *
+ * @retval None
+ */
+void HAL_DisableFMCMemorySwapping(void)
+{
+
+ SYSCFG->MEMRMP &= (uint32_t)~((uint32_t)SYSCFG_MEMRMP_SWP_FMC);
+}
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/**
+* @brief Enable the Internal FLASH Bank Swapping.
+*
+* @note This function can be used only for STM32F77xx/STM32F76xx devices.
+*
+* @note Flash Bank2 mapped at 0x08000000 (AXI) (aliased at 0x00200000 (TCM))
+* and Flash Bank1 mapped at 0x08100000 (AXI) (aliased at 0x00300000 (TCM))
+*
+* @retval None
+*/
+void HAL_EnableMemorySwappingBank(void)
+{
+ SET_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FB);
+}
+
+/**
+* @brief Disable the Internal FLASH Bank Swapping.
+*
+* @note This function can be used only for STM32F77xx/STM32F76xx devices.
+*
+* @note The default state : Flash Bank1 mapped at 0x08000000 (AXI) (aliased at 0x00200000 (TCM))
+* and Flash Bank2 mapped at 0x08100000 (AXI)( aliased at 0x00300000 (TCM))
+*
+* @retval None
+*/
+void HAL_DisableMemorySwappingBank(void)
+{
+ CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FB);
+}
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c
new file mode 100644
index 00000000..de5aeb87
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c
@@ -0,0 +1,521 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_cortex.c
+ * @author MCD Application Team
+ * @brief CORTEX HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the CORTEX:
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+
+ [..]
+ *** How to configure Interrupts using CORTEX HAL driver ***
+ ===========================================================
+ [..]
+ This section provides functions allowing to configure the NVIC interrupts (IRQ).
+ The Cortex-M4 exceptions are managed by CMSIS functions.
+
+ (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping()
+ function according to the following table.
+ (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority().
+ (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ().
+ (#) please refer to programming manual for details in how to configure priority.
+
+ -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ preemption is no more possible.
+ The pending IRQ priority will be managed only by the sub priority.
+
+ -@- IRQ priority order (sorted by highest to lowest priority):
+ (+@) Lowest preemption priority
+ (+@) Lowest sub priority
+ (+@) Lowest hardware priority (IRQ number)
+
+ [..]
+ *** How to configure Systick using CORTEX HAL driver ***
+ ========================================================
+ [..]
+ Setup SysTick Timer for time base.
+
+ (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which
+ is a CMSIS function that:
+ (++) Configures the SysTick Reload register with value passed as function parameter.
+ (++) Configures the SysTick IRQ priority to the lowest value (0x0F).
+ (++) Resets the SysTick Counter register.
+ (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
+ (++) Enables the SysTick Interrupt.
+ (++) Starts the SysTick Counter.
+
+ (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
+ __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
+ HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined
+ inside the stm32f7xx_hal_cortex.h file.
+
+ (+) You can change the SysTick IRQ priority by calling the
+ HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function
+ call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
+
+ (+) To adjust the SysTick time base, use the following formula:
+
+ Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s)
+ (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
+ (++) Reload Value should not exceed 0xFFFFFF
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup CORTEX CORTEX
+ * @brief CORTEX HAL module driver
+ * @{
+ */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
+ * @{
+ */
+
+
+/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides the CORTEX HAL driver functions allowing to configure Interrupts
+ Systick functionalities
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Sets the priority grouping field (preemption priority and subpriority)
+ * using the required unlock sequence.
+ * @param PriorityGroup The priority grouping bits length.
+ * This parameter can be one of the following values:
+ * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
+ * 4 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
+ * 3 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
+ * 2 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
+ * 1 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
+ * 0 bits for subpriority
+ * @note When the NVIC_PriorityGroup_0 is selected, IRQ preemption is no more possible.
+ * The pending IRQ priority will be managed only by the subpriority.
+ * @retval None
+ */
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+
+ /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */
+ NVIC_SetPriorityGrouping(PriorityGroup);
+}
+
+/**
+ * @brief Sets the priority of an interrupt.
+ * @param IRQn External interrupt number.
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+ * @param PreemptPriority The preemption priority for the IRQn channel.
+ * This parameter can be a value between 0 and 15
+ * A lower priority value indicates a higher priority
+ * @param SubPriority the subpriority level for the IRQ channel.
+ * This parameter can be a value between 0 and 15
+ * A lower priority value indicates a higher priority.
+ * @retval None
+ */
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t prioritygroup = 0x00;
+
+ /* Check the parameters */
+ assert_param(IS_NVIC_SUB_PRIORITY(SubPriority));
+ assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
+
+ prioritygroup = NVIC_GetPriorityGrouping();
+
+ NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority));
+}
+
+/**
+ * @brief Enables a device specific interrupt in the NVIC interrupt controller.
+ * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
+ * function should be called before.
+ * @param IRQn External interrupt number.
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Enable interrupt */
+ NVIC_EnableIRQ(IRQn);
+}
+
+/**
+ * @brief Disables a device specific interrupt in the NVIC interrupt controller.
+ * @param IRQn External interrupt number.
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Disable interrupt */
+ NVIC_DisableIRQ(IRQn);
+}
+
+/**
+ * @brief Initiates a system reset request to reset the MCU.
+ * @retval None
+ */
+void HAL_NVIC_SystemReset(void)
+{
+ /* System Reset */
+ NVIC_SystemReset();
+}
+
+/**
+ * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ * Counter is in free running mode to generate periodic interrupts.
+ * @param TicksNumb Specifies the ticks Number of ticks between two interrupts.
+ * @retval status: - 0 Function succeeded.
+ * - 1 Function failed.
+ */
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
+{
+ return SysTick_Config(TicksNumb);
+}
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
+ * @brief Cortex control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the CORTEX
+ (NVIC, SYSTICK, MPU) functionalities.
+
+
+@endverbatim
+ * @{
+ */
+
+#if (__MPU_PRESENT == 1)
+/**
+ * @brief Disables the MPU
+ * @retval None
+ */
+void HAL_MPU_Disable(void)
+{
+ /* Make sure outstanding transfers are done */
+ __DMB();
+
+ /* Disable fault exceptions */
+ SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+
+ /* Disable the MPU and clear the control register*/
+ MPU->CTRL = 0;
+}
+
+/**
+ * @brief Enables the MPU
+ * @param MPU_Control Specifies the control mode of the MPU during hard fault,
+ * NMI, FAULTMASK and privileged access to the default memory
+ * This parameter can be one of the following values:
+ * @arg MPU_HFNMI_PRIVDEF_NONE
+ * @arg MPU_HARDFAULT_NMI
+ * @arg MPU_PRIVILEGED_DEFAULT
+ * @arg MPU_HFNMI_PRIVDEF
+ * @retval None
+ */
+void HAL_MPU_Enable(uint32_t MPU_Control)
+{
+ /* Enable the MPU */
+ MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
+
+ /* Enable fault exceptions */
+ SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+
+ /* Ensure MPU setting take effects */
+ __DSB();
+ __ISB();
+}
+
+/**
+ * @brief Initializes and configures the Region and the memory to be protected.
+ * @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains
+ * the initialization and configuration information.
+ * @retval None
+ */
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init)
+{
+ /* Check the parameters */
+ assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number));
+ assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable));
+
+ /* Set the Region number */
+ MPU->RNR = MPU_Init->Number;
+
+ if ((MPU_Init->Enable) != RESET)
+ {
+ /* Check the parameters */
+ assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec));
+ assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission));
+ assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField));
+ assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable));
+ assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable));
+ assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable));
+ assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable));
+ assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size));
+
+ MPU->RBAR = MPU_Init->BaseAddress;
+ MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) |
+ ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) |
+ ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) |
+ ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) |
+ ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) |
+ ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) |
+ ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) |
+ ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) |
+ ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos);
+ }
+ else
+ {
+ MPU->RBAR = 0x00;
+ MPU->RASR = 0x00;
+ }
+}
+#endif /* __MPU_PRESENT */
+
+/**
+ * @brief Gets the priority grouping field from the NVIC Interrupt Controller.
+ * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field)
+ */
+uint32_t HAL_NVIC_GetPriorityGrouping(void)
+{
+ /* Get the PRIGROUP[10:8] field value */
+ return NVIC_GetPriorityGrouping();
+}
+
+/**
+ * @brief Gets the priority of an interrupt.
+ * @param IRQn External interrupt number.
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+ * @param PriorityGroup the priority grouping bits length.
+ * This parameter can be one of the following values:
+ * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
+ * 4 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
+ * 3 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
+ * 2 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
+ * 1 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
+ * 0 bits for subpriority
+ * @param pPreemptPriority Pointer on the Preemptive priority value (starting from 0).
+ * @param pSubPriority Pointer on the Subpriority value (starting from 0).
+ * @retval None
+ */
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+ /* Get priority for Cortex-M system or device specific interrupts */
+ NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority);
+}
+
+/**
+ * @brief Sets Pending bit of an external interrupt.
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Set interrupt pending */
+ NVIC_SetPendingIRQ(IRQn);
+}
+
+/**
+ * @brief Gets Pending Interrupt (reads the pending register in the NVIC
+ * and returns the pending bit for the specified interrupt).
+ * @param IRQn External interrupt number.
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+ * @retval status: - 0 Interrupt status is not pending.
+ * - 1 Interrupt status is pending.
+ */
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Return 1 if pending else 0 */
+ return NVIC_GetPendingIRQ(IRQn);
+}
+
+/**
+ * @brief Clears the pending bit of an external interrupt.
+ * @param IRQn External interrupt number.
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Clear pending interrupt */
+ NVIC_ClearPendingIRQ(IRQn);
+}
+
+/**
+ * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit).
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+ * @retval status: - 0 Interrupt status is not pending.
+ * - 1 Interrupt status is pending.
+ */
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Return 1 if active else 0 */
+ return NVIC_GetActive(IRQn);
+}
+
+/**
+ * @brief Configures the SysTick clock source.
+ * @param CLKSource specifies the SysTick clock source.
+ * This parameter can be one of the following values:
+ * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+ * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+ * @retval None
+ */
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
+ if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
+ {
+ SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
+ }
+ else
+ {
+ SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
+ }
+}
+
+/**
+ * @brief This function handles SYSTICK interrupt request.
+ * @retval None
+ */
+void HAL_SYSTICK_IRQHandler(void)
+{
+ HAL_SYSTICK_Callback();
+}
+
+/**
+ * @brief SYSTICK callback.
+ * @retval None
+ */
+__weak void HAL_SYSTICK_Callback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SYSTICK_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c
new file mode 100644
index 00000000..276dfa02
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c
@@ -0,0 +1,1323 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_dma.c
+ * @author MCD Application Team
+ * @brief DMA HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the Direct Memory Access (DMA) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State and errors functions
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Enable and configure the peripheral to be connected to the DMA Stream
+ (except for internal SRAM/FLASH memories: no initialization is
+ necessary) please refer to Reference manual for connection between peripherals
+ and DMA requests.
+
+ (#) For a given Stream, program the required configuration through the following parameters:
+ Transfer Direction, Source and Destination data formats,
+ Circular, Normal or peripheral flow control mode, Stream Priority level,
+ Source and Destination Increment mode, FIFO mode and its Threshold (if needed),
+ Burst mode for Source and/or Destination (if needed) using HAL_DMA_Init() function.
+
+ -@- Prior to HAL_DMA_Init() the clock must be enabled for DMA through the following macros:
+ __HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE().
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source
+ address and destination address and the Length of data to be transferred.
+ (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this
+ case a fixed Timeout can be configured by User depending from his application.
+ (+) Use HAL_DMA_Abort() function to abort the current transfer.
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority()
+ (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ()
+ (+) Select Callbacks functions using HAL_DMA_RegisterCallback()
+ (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of
+ Source address and destination address and the Length of data to be transferred. In this
+ case the DMA interrupt is configured
+ (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine
+ (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can
+ add his own function by customization of function pointer XferCpltCallback and
+ XferErrorCallback (i.e a member of DMA handle structure).
+ [..]
+ (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error
+ detection.
+
+ (#) Use HAL_DMA_Abort_IT() function to abort the current transfer
+
+ -@- In Memory-to-Memory transfer mode, Circular mode is not allowed.
+
+ -@- The FIFO is used mainly to reduce bus usage and to allow data packing/unpacking: it is
+ possible to set different Data Sizes for the Peripheral and the Memory (ie. you can set
+ Half-Word data size for the peripheral to access its data register and set Word data size
+ for the Memory to gain in access time. Each two half words will be packed and written in
+ a single access to a Word in the Memory).
+
+ -@- When FIFO is disabled, it is not allowed to configure different Data Sizes for Source
+ and Destination. In this case the Peripheral Data Size will be applied to both Source
+ and Destination.
+
+ *** DMA HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in DMA HAL driver.
+
+ (+) __HAL_DMA_ENABLE: Enable the specified DMA Stream.
+ (+) __HAL_DMA_DISABLE: Disable the specified DMA Stream.
+ (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Stream interrupt has occurred or not.
+
+ [..]
+ (@) You can refer to the DMA HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup DMA DMA
+ * @brief DMA HAL module driver
+ * @{
+ */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register */
+ __IO uint32_t Reserved0;
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register */
+} DMA_Base_Registers;
+
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup DMA_Private_Constants
+ * @{
+ */
+ #define HAL_TIMEOUT_DMA_ABORT ((uint32_t)5) /* 5 ms */
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup DMA_Private_Functions
+ * @{
+ */
+static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma);
+
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+/** @addtogroup DMA_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group1
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ This section provides functions allowing to initialize the DMA Stream source
+ and destination addresses, incrementation and data sizes, transfer direction,
+ circular/normal mode selection, memory-to-memory mode selection and Stream priority value.
+ [..]
+ The HAL_DMA_Init() function follows the DMA configuration procedures as described in
+ reference manual.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the DMA according to the specified
+ * parameters in the DMA_InitTypeDef and create the associated handle.
+ * @param hdma Pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma)
+{
+ uint32_t tmp = 0U;
+ uint32_t tickstart = HAL_GetTick();
+ DMA_Base_Registers *regs;
+
+ /* Check the DMA peripheral state */
+ if(hdma == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
+ assert_param(IS_DMA_CHANNEL(hdma->Init.Channel));
+ assert_param(IS_DMA_DIRECTION(hdma->Init.Direction));
+ assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc));
+ assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc));
+ assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment));
+ assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment));
+ assert_param(IS_DMA_MODE(hdma->Init.Mode));
+ assert_param(IS_DMA_PRIORITY(hdma->Init.Priority));
+ assert_param(IS_DMA_FIFO_MODE_STATE(hdma->Init.FIFOMode));
+ /* Check the memory burst, peripheral burst and FIFO threshold parameters only
+ when FIFO mode is enabled */
+ if(hdma->Init.FIFOMode != DMA_FIFOMODE_DISABLE)
+ {
+ assert_param(IS_DMA_FIFO_THRESHOLD(hdma->Init.FIFOThreshold));
+ assert_param(IS_DMA_MEMORY_BURST(hdma->Init.MemBurst));
+ assert_param(IS_DMA_PERIPHERAL_BURST(hdma->Init.PeriphBurst));
+ }
+
+ /* Allocate lock resource */
+ __HAL_UNLOCK(hdma);
+
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Disable the peripheral */
+ __HAL_DMA_DISABLE(hdma);
+
+ /* Check if the DMA Stream is effectively disabled */
+ while((hdma->Instance->CR & DMA_SxCR_EN) != RESET)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT)
+ {
+ /* Update error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_TIMEOUT;
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get the CR register value */
+ tmp = hdma->Instance->CR;
+
+ /* Clear CHSEL, MBURST, PBURST, PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR, CT and DBM bits */
+ tmp &= ((uint32_t)~(DMA_SxCR_CHSEL | DMA_SxCR_MBURST | DMA_SxCR_PBURST | \
+ DMA_SxCR_PL | DMA_SxCR_MSIZE | DMA_SxCR_PSIZE | \
+ DMA_SxCR_MINC | DMA_SxCR_PINC | DMA_SxCR_CIRC | \
+ DMA_SxCR_DIR | DMA_SxCR_CT | DMA_SxCR_DBM));
+
+ /* Prepare the DMA Stream configuration */
+ tmp |= hdma->Init.Channel | hdma->Init.Direction |
+ hdma->Init.PeriphInc | hdma->Init.MemInc |
+ hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment |
+ hdma->Init.Mode | hdma->Init.Priority;
+
+ /* the Memory burst and peripheral burst are not used when the FIFO is disabled */
+ if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE)
+ {
+ /* Get memory burst and peripheral burst */
+ tmp |= hdma->Init.MemBurst | hdma->Init.PeriphBurst;
+ }
+
+ /* Write to DMA Stream CR register */
+ hdma->Instance->CR = tmp;
+
+ /* Get the FCR register value */
+ tmp = hdma->Instance->FCR;
+
+ /* Clear Direct mode and FIFO threshold bits */
+ tmp &= (uint32_t)~(DMA_SxFCR_DMDIS | DMA_SxFCR_FTH);
+
+ /* Prepare the DMA Stream FIFO configuration */
+ tmp |= hdma->Init.FIFOMode;
+
+ /* The FIFO threshold is not used when the FIFO mode is disabled */
+ if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE)
+ {
+ /* Get the FIFO threshold */
+ tmp |= hdma->Init.FIFOThreshold;
+
+ /* Check compatibility between FIFO threshold level and size of the memory burst */
+ /* for INCR4, INCR8, INCR16 bursts */
+ if (hdma->Init.MemBurst != DMA_MBURST_SINGLE)
+ {
+ if (DMA_CheckFifoParam(hdma) != HAL_OK)
+ {
+ /* Update error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_PARAM;
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ /* Write to DMA Stream FCR */
+ hdma->Instance->FCR = tmp;
+
+ /* Initialize StreamBaseAddress and StreamIndex parameters to be used to calculate
+ DMA steam Base Address needed by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */
+ regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma);
+
+ /* Clear all interrupt flags */
+ regs->IFCR = 0x3FU << hdma->StreamIndex;
+
+ /* Initialize the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Initialize the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the DMA peripheral
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma)
+{
+ DMA_Base_Registers *regs;
+
+ /* Check the DMA peripheral state */
+ if(hdma == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the DMA peripheral state */
+ if(hdma->State == HAL_DMA_STATE_BUSY)
+ {
+ /* Return error status */
+ return HAL_BUSY;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
+
+ /* Disable the selected DMA Streamx */
+ __HAL_DMA_DISABLE(hdma);
+
+ /* Reset DMA Streamx control register */
+ hdma->Instance->CR = 0U;
+
+ /* Reset DMA Streamx number of data to transfer register */
+ hdma->Instance->NDTR = 0U;
+
+ /* Reset DMA Streamx peripheral address register */
+ hdma->Instance->PAR = 0U;
+
+ /* Reset DMA Streamx memory 0 address register */
+ hdma->Instance->M0AR = 0U;
+
+ /* Reset DMA Streamx memory 1 address register */
+ hdma->Instance->M1AR = 0U;
+
+ /* Reset DMA Streamx FIFO control register */
+ hdma->Instance->FCR = (uint32_t)0x00000021U;
+
+ /* Get DMA steam Base Address */
+ regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma);
+
+ /* Clear all interrupt flags at correct offset within the register */
+ regs->IFCR = 0x3FU << hdma->StreamIndex;
+
+ /* Clean all callbacks */
+ hdma->XferCpltCallback = NULL;
+ hdma->XferHalfCpltCallback = NULL;
+ hdma->XferM1CpltCallback = NULL;
+ hdma->XferM1HalfCpltCallback = NULL;
+ hdma->XferErrorCallback = NULL;
+ hdma->XferAbortCallback = NULL;
+
+ /* Reset the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Reset the DMA state */
+ hdma->State = HAL_DMA_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group2
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure the source, destination address and data length and Start DMA transfer
+ (+) Configure the source, destination address and data length and
+ Start DMA transfer with interrupt
+ (+) Abort DMA transfer
+ (+) Poll for transfer complete
+ (+) Handle DMA interrupt request
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the DMA Transfer.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param SrcAddress The source memory Buffer address
+ * @param DstAddress The destination memory Buffer address
+ * @param DataLength The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Initialize the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Configure the source, destination address and the data length */
+ DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+ /* Enable the Peripheral */
+ __HAL_DMA_ENABLE(hdma);
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Return error status */
+ status = HAL_BUSY;
+ }
+ return status;
+}
+
+/**
+ * @brief Start the DMA Transfer with interrupt enabled.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param SrcAddress The source memory Buffer address
+ * @param DstAddress The destination memory Buffer address
+ * @param DataLength The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* calculate DMA base and stream number */
+ DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Initialize the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Configure the source, destination address and the data length */
+ DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+ /* Clear all interrupt flags at correct offset within the register */
+ regs->IFCR = 0x3FU << hdma->StreamIndex;
+
+ /* Enable Common interrupts*/
+ hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME;
+ hdma->Instance->FCR |= DMA_IT_FE;
+
+ if(hdma->XferHalfCpltCallback != NULL)
+ {
+ hdma->Instance->CR |= DMA_IT_HT;
+ }
+
+ /* Enable the Peripheral */
+ __HAL_DMA_ENABLE(hdma);
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Return error status */
+ status = HAL_BUSY;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Aborts the DMA Transfer.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ *
+ * @note After disabling a DMA Stream, a check for wait until the DMA Stream is
+ * effectively disabled is added. If a Stream is disabled
+ * while a data transfer is ongoing, the current data will be transferred
+ * and the Stream will be effectively disabled only after the transfer of
+ * this single data is finished.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma)
+{
+ /* calculate DMA base and stream number */
+ DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
+
+ uint32_t tickstart = HAL_GetTick();
+
+ if(hdma->State != HAL_DMA_STATE_BUSY)
+ {
+ hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Disable all the transfer interrupts */
+ hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME);
+ hdma->Instance->FCR &= ~(DMA_IT_FE);
+
+ if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL))
+ {
+ hdma->Instance->CR &= ~(DMA_IT_HT);
+ }
+
+ /* Disable the stream */
+ __HAL_DMA_DISABLE(hdma);
+
+ /* Check if the DMA Stream is effectively disabled */
+ while((hdma->Instance->CR & DMA_SxCR_EN) != RESET)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT)
+ {
+ /* Update error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_TIMEOUT;
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear all interrupt flags at correct offset within the register */
+ regs->IFCR = 0x3FU << hdma->StreamIndex;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state*/
+ hdma->State = HAL_DMA_STATE_READY;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Aborts the DMA Transfer in Interrupt mode.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma)
+{
+ if(hdma->State != HAL_DMA_STATE_BUSY)
+ {
+ hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Set Abort State */
+ hdma->State = HAL_DMA_STATE_ABORT;
+
+ /* Disable the stream */
+ __HAL_DMA_DISABLE(hdma);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Polling for transfer complete.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param CompleteLevel Specifies the DMA level complete.
+ * @note The polling mode is kept in this version for legacy. it is recommanded to use the IT model instead.
+ * This model could be used for debug purpose.
+ * @note The HAL_DMA_PollForTransfer API cannot be used in circular and double buffering mode (automatic circular mode).
+ * @param Timeout Timeout duration.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t mask_cpltlevel;
+ uint32_t tickstart = HAL_GetTick();
+ uint32_t tmpisr;
+
+ /* calculate DMA base and stream number */
+ DMA_Base_Registers *regs;
+
+ if(HAL_DMA_STATE_BUSY != hdma->State)
+ {
+ /* No transfer ongoing */
+ hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
+ __HAL_UNLOCK(hdma);
+ return HAL_ERROR;
+ }
+
+ /* Polling mode not supported in circular mode and double buffering mode */
+ if ((hdma->Instance->CR & DMA_SxCR_CIRC) != RESET)
+ {
+ hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
+ return HAL_ERROR;
+ }
+
+ /* Get the level transfer complete flag */
+ if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
+ {
+ /* Transfer Complete flag */
+ mask_cpltlevel = DMA_FLAG_TCIF0_4 << hdma->StreamIndex;
+ }
+ else
+ {
+ /* Half Transfer Complete flag */
+ mask_cpltlevel = DMA_FLAG_HTIF0_4 << hdma->StreamIndex;
+ }
+
+ regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
+ tmpisr = regs->ISR;
+
+ while(((tmpisr & mask_cpltlevel) == RESET) && ((hdma->ErrorCode & HAL_DMA_ERROR_TE) == RESET))
+ {
+ /* Check for the Timeout (Not applicable in circular mode)*/
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Update error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get the ISR register value */
+ tmpisr = regs->ISR;
+
+ if((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ /* Update error code */
+ hdma->ErrorCode |= HAL_DMA_ERROR_TE;
+
+ /* Clear the transfer error flag */
+ regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex;
+ }
+
+ if((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ /* Update error code */
+ hdma->ErrorCode |= HAL_DMA_ERROR_FE;
+
+ /* Clear the FIFO error flag */
+ regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex;
+ }
+
+ if((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ /* Update error code */
+ hdma->ErrorCode |= HAL_DMA_ERROR_DME;
+
+ /* Clear the Direct Mode error flag */
+ regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex;
+ }
+ }
+
+ if(hdma->ErrorCode != HAL_DMA_ERROR_NONE)
+ {
+ if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET)
+ {
+ HAL_DMA_Abort(hdma);
+
+ /* Clear the half transfer and transfer complete flags */
+ regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state */
+ hdma->State= HAL_DMA_STATE_READY;
+
+ return HAL_ERROR;
+ }
+ }
+
+ /* Get the level transfer complete flag */
+ if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
+ {
+ /* Clear the half transfer and transfer complete flags */
+ regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ hdma->State = HAL_DMA_STATE_READY;
+ }
+ else
+ {
+ /* Clear the half transfer flag */
+ regs->IFCR = (DMA_FLAG_HTIF0_4) << hdma->StreamIndex;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Handles DMA interrupt request.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval None
+ */
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
+{
+ uint32_t tmpisr;
+ __IO uint32_t count = 0;
+ uint32_t timeout = SystemCoreClock / 9600;
+
+ /* calculate DMA base and stream number */
+ DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
+
+ tmpisr = regs->ISR;
+
+ /* Transfer Error Interrupt management ***************************************/
+ if ((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TE) != RESET)
+ {
+ /* Disable the transfer error interrupt */
+ hdma->Instance->CR &= ~(DMA_IT_TE);
+
+ /* Clear the transfer error flag */
+ regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex;
+
+ /* Update error code */
+ hdma->ErrorCode |= HAL_DMA_ERROR_TE;
+ }
+ }
+ /* FIFO Error Interrupt management ******************************************/
+ if ((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_FE) != RESET)
+ {
+ /* Clear the FIFO error flag */
+ regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex;
+
+ /* Update error code */
+ hdma->ErrorCode |= HAL_DMA_ERROR_FE;
+ }
+ }
+ /* Direct Mode Error Interrupt management ***********************************/
+ if ((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_DME) != RESET)
+ {
+ /* Clear the direct mode error flag */
+ regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex;
+
+ /* Update error code */
+ hdma->ErrorCode |= HAL_DMA_ERROR_DME;
+ }
+ }
+ /* Half Transfer Complete Interrupt management ******************************/
+ if ((tmpisr & (DMA_FLAG_HTIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != RESET)
+ {
+ /* Clear the half transfer complete flag */
+ regs->IFCR = DMA_FLAG_HTIF0_4 << hdma->StreamIndex;
+
+ /* Multi_Buffering mode enabled */
+ if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET)
+ {
+ /* Current memory buffer used is Memory 0 */
+ if((hdma->Instance->CR & DMA_SxCR_CT) == RESET)
+ {
+ if(hdma->XferHalfCpltCallback != NULL)
+ {
+ /* Half transfer callback */
+ hdma->XferHalfCpltCallback(hdma);
+ }
+ }
+ /* Current memory buffer used is Memory 1 */
+ else
+ {
+ if(hdma->XferM1HalfCpltCallback != NULL)
+ {
+ /* Half transfer callback */
+ hdma->XferM1HalfCpltCallback(hdma);
+ }
+ }
+ }
+ else
+ {
+ /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET)
+ {
+ /* Disable the half transfer interrupt */
+ hdma->Instance->CR &= ~(DMA_IT_HT);
+ }
+
+ if(hdma->XferHalfCpltCallback != NULL)
+ {
+ /* Half transfer callback */
+ hdma->XferHalfCpltCallback(hdma);
+ }
+ }
+ }
+ }
+ /* Transfer Complete Interrupt management ***********************************/
+ if ((tmpisr & (DMA_FLAG_TCIF0_4 << hdma->StreamIndex)) != RESET)
+ {
+ if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != RESET)
+ {
+ /* Clear the transfer complete flag */
+ regs->IFCR = DMA_FLAG_TCIF0_4 << hdma->StreamIndex;
+
+ if(HAL_DMA_STATE_ABORT == hdma->State)
+ {
+ /* Disable all the transfer interrupts */
+ hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME);
+ hdma->Instance->FCR &= ~(DMA_IT_FE);
+
+ if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL))
+ {
+ hdma->Instance->CR &= ~(DMA_IT_HT);
+ }
+
+ /* Clear all interrupt flags at correct offset within the register */
+ regs->IFCR = 0x3FU << hdma->StreamIndex;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ if(hdma->XferAbortCallback != NULL)
+ {
+ hdma->XferAbortCallback(hdma);
+ }
+ return;
+ }
+
+ if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET)
+ {
+ /* Current memory buffer used is Memory 0 */
+ if((hdma->Instance->CR & DMA_SxCR_CT) == RESET)
+ {
+ if(hdma->XferM1CpltCallback != NULL)
+ {
+ /* Transfer complete Callback for memory1 */
+ hdma->XferM1CpltCallback(hdma);
+ }
+ }
+ /* Current memory buffer used is Memory 1 */
+ else
+ {
+ if(hdma->XferCpltCallback != NULL)
+ {
+ /* Transfer complete Callback for memory0 */
+ hdma->XferCpltCallback(hdma);
+ }
+ }
+ }
+ /* Disable the transfer complete interrupt if the DMA mode is not CIRCULAR */
+ else
+ {
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET)
+ {
+ /* Disable the transfer complete interrupt */
+ hdma->Instance->CR &= ~(DMA_IT_TC);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+ }
+
+ if(hdma->XferCpltCallback != NULL)
+ {
+ /* Transfer complete callback */
+ hdma->XferCpltCallback(hdma);
+ }
+ }
+ }
+ }
+
+ /* manage error case */
+ if(hdma->ErrorCode != HAL_DMA_ERROR_NONE)
+ {
+ if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET)
+ {
+ hdma->State = HAL_DMA_STATE_ABORT;
+
+ /* Disable the stream */
+ __HAL_DMA_DISABLE(hdma);
+
+ do
+ {
+ if (++count > timeout)
+ {
+ break;
+ }
+ }
+ while((hdma->Instance->CR & DMA_SxCR_EN) != RESET);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+ }
+
+ if(hdma->XferErrorCallback != NULL)
+ {
+ /* Transfer error callback */
+ hdma->XferErrorCallback(hdma);
+ }
+ }
+}
+
+/**
+ * @brief Register callbacks
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param CallbackID User Callback identifer
+ * a DMA_HandleTypeDef structure as parameter.
+ * @param pCallback pointer to private callbacsk function which has pointer to
+ * a DMA_HandleTypeDef structure as parameter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma))
+{
+
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_DMA_XFER_CPLT_CB_ID:
+ hdma->XferCpltCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_HALFCPLT_CB_ID:
+ hdma->XferHalfCpltCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_M1CPLT_CB_ID:
+ hdma->XferM1CpltCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_M1HALFCPLT_CB_ID:
+ hdma->XferM1HalfCpltCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_ERROR_CB_ID:
+ hdma->XferErrorCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_ABORT_CB_ID:
+ hdma->XferAbortCallback = pCallback;
+ break;
+
+ default:
+ break;
+ }
+ }
+ else
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdma);
+
+ return status;
+}
+
+/**
+ * @brief UnRegister callbacks
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param CallbackID User Callback identifer
+ * a HAL_DMA_CallbackIDTypeDef ENUM as parameter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_DMA_XFER_CPLT_CB_ID:
+ hdma->XferCpltCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_HALFCPLT_CB_ID:
+ hdma->XferHalfCpltCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_M1CPLT_CB_ID:
+ hdma->XferM1CpltCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_M1HALFCPLT_CB_ID:
+ hdma->XferM1HalfCpltCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_ERROR_CB_ID:
+ hdma->XferErrorCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_ABORT_CB_ID:
+ hdma->XferAbortCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_ALL_CB_ID:
+ hdma->XferCpltCallback = NULL;
+ hdma->XferHalfCpltCallback = NULL;
+ hdma->XferM1CpltCallback = NULL;
+ hdma->XferM1HalfCpltCallback = NULL;
+ hdma->XferErrorCallback = NULL;
+ hdma->XferAbortCallback = NULL;
+ break;
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdma);
+
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group3
+ *
+@verbatim
+ ===============================================================================
+ ##### State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Check the DMA state
+ (+) Get error code
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the DMA state.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval HAL state
+ */
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma)
+{
+ return hdma->State;
+}
+
+/**
+ * @brief Return the DMA error code
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval DMA Error Code
+ */
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma)
+{
+ return hdma->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Sets the DMA Transfer parameter.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param SrcAddress The source memory Buffer address
+ * @param DstAddress The destination memory Buffer address
+ * @param DataLength The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ /* Clear DBM bit */
+ hdma->Instance->CR &= (uint32_t)(~DMA_SxCR_DBM);
+
+ /* Configure DMA Stream data length */
+ hdma->Instance->NDTR = DataLength;
+
+ /* Memory to Peripheral */
+ if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
+ {
+ /* Configure DMA Stream destination address */
+ hdma->Instance->PAR = DstAddress;
+
+ /* Configure DMA Stream source address */
+ hdma->Instance->M0AR = SrcAddress;
+ }
+ /* Peripheral to Memory */
+ else
+ {
+ /* Configure DMA Stream source address */
+ hdma->Instance->PAR = SrcAddress;
+
+ /* Configure DMA Stream destination address */
+ hdma->Instance->M0AR = DstAddress;
+ }
+}
+
+/**
+ * @brief Returns the DMA Stream base address depending on stream number
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval Stream base address
+ */
+static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma)
+{
+ uint32_t stream_number = (((uint32_t)hdma->Instance & 0xFFU) - 16U) / 24U;
+
+ /* lookup table for necessary bitshift of flags within status registers */
+ static const uint8_t flagBitshiftOffset[8U] = {0U, 6U, 16U, 22U, 0U, 6U, 16U, 22U};
+ hdma->StreamIndex = flagBitshiftOffset[stream_number];
+
+ if (stream_number > 3U)
+ {
+ /* return pointer to HISR and HIFCR */
+ hdma->StreamBaseAddress = (((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU)) + 4U);
+ }
+ else
+ {
+ /* return pointer to LISR and LIFCR */
+ hdma->StreamBaseAddress = ((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU));
+ }
+
+ return hdma->StreamBaseAddress;
+}
+
+/**
+ * @brief Check compatibility between FIFO threshold level and size of the memory burst
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tmp = hdma->Init.FIFOThreshold;
+
+ /* Memory Data size equal to Byte */
+ if(hdma->Init.MemDataAlignment == DMA_MDATAALIGN_BYTE)
+ {
+ switch (tmp)
+ {
+ case DMA_FIFO_THRESHOLD_1QUARTERFULL:
+ case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
+ if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
+ {
+ status = HAL_ERROR;
+ }
+ break;
+ case DMA_FIFO_THRESHOLD_HALFFULL:
+ if (hdma->Init.MemBurst == DMA_MBURST_INC16)
+ {
+ status = HAL_ERROR;
+ }
+ break;
+ case DMA_FIFO_THRESHOLD_FULL:
+ break;
+ default:
+ break;
+ }
+ }
+
+ /* Memory Data size equal to Half-Word */
+ else if (hdma->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)
+ {
+ switch (tmp)
+ {
+ case DMA_FIFO_THRESHOLD_1QUARTERFULL:
+ case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
+ status = HAL_ERROR;
+ break;
+ case DMA_FIFO_THRESHOLD_HALFFULL:
+ if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
+ {
+ status = HAL_ERROR;
+ }
+ break;
+ case DMA_FIFO_THRESHOLD_FULL:
+ if (hdma->Init.MemBurst == DMA_MBURST_INC16)
+ {
+ status = HAL_ERROR;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+ /* Memory Data size equal to Word */
+ else
+ {
+ switch (tmp)
+ {
+ case DMA_FIFO_THRESHOLD_1QUARTERFULL:
+ case DMA_FIFO_THRESHOLD_HALFFULL:
+ case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
+ status = HAL_ERROR;
+ break;
+ case DMA_FIFO_THRESHOLD_FULL:
+ if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
+ {
+ status = HAL_ERROR;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_DMA_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c
new file mode 100644
index 00000000..d16a1ccf
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c
@@ -0,0 +1,326 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_dma_ex.c
+ * @author MCD Application Team
+ * @brief DMA Extension HAL module driver
+ * This file provides firmware functions to manage the following
+ * functionalities of the DMA Extension peripheral:
+ * + Extended features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The DMA Extension HAL driver can be used as follows:
+ (+) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function
+ for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode.
+
+ -@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed.
+ -@- When Multi (Double) Buffer mode is enabled, the transfer is circular by default.
+ -@- In Multi (Double) buffer mode, it is possible to update the base address for
+ the AHB memory port on the fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup DMAEx DMAEx
+ * @brief DMA Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private Constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup DMAEx_Private_Functions
+ * @{
+ */
+
+static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @addtogroup DMAEx_Exported_Functions
+ * @{
+ */
+
+
+/** @addtogroup DMAEx_Exported_Functions_Group1
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure the source, destination address and data length and
+ Start MultiBuffer DMA transfer
+ (+) Configure the source, destination address and data length and
+ Start MultiBuffer DMA transfer with interrupt
+ (+) Change on the fly the memory0 or memory1 address.
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Starts the multi_buffer DMA Transfer.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param SrcAddress The source memory Buffer address
+ * @param DstAddress The destination memory Buffer address
+ * @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer
+ * @param DataLength The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+ /* Memory-to-memory transfer not supported in double buffering mode */
+ if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY)
+ {
+ hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Process Locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Enable the double buffer mode */
+ hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
+
+ /* Configure DMA Stream destination address */
+ hdma->Instance->M1AR = SecondMemAddress;
+
+ /* Configure the source, destination address and the data length */
+ DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+ /* Enable the peripheral */
+ __HAL_DMA_ENABLE(hdma);
+ }
+ else
+ {
+ /* Return error status */
+ status = HAL_BUSY;
+ }
+ }
+ return status;
+}
+
+/**
+ * @brief Starts the multi_buffer DMA Transfer with interrupt enabled.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param SrcAddress The source memory Buffer address
+ * @param DstAddress The destination memory Buffer address
+ * @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer
+ * @param DataLength The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+ /* Memory-to-memory transfer not supported in double buffering mode */
+ if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY)
+ {
+ hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
+ return HAL_ERROR;
+ }
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Initialize the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Enable the Double buffer mode */
+ hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
+
+ /* Configure DMA Stream destination address */
+ hdma->Instance->M1AR = SecondMemAddress;
+
+ /* Configure the source, destination address and the data length */
+ DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+ /* Clear all flags */
+ __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
+ __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
+ __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
+ __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma));
+ __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma));
+
+ /* Enable Common interrupts*/
+ hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME;
+ hdma->Instance->FCR |= DMA_IT_FE;
+
+ if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL))
+ {
+ hdma->Instance->CR |= DMA_IT_HT;
+ }
+
+ /* Enable the peripheral */
+ __HAL_DMA_ENABLE(hdma);
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Return error status */
+ status = HAL_BUSY;
+ }
+ return status;
+}
+
+/**
+ * @brief Change the memory0 or memory1 address on the fly.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param Address The new address
+ * @param memory the memory to be changed, This parameter can be one of
+ * the following values:
+ * MEMORY0 /
+ * MEMORY1
+ * @note The MEMORY0 address can be changed only when the current transfer use
+ * MEMORY1 and the MEMORY1 address can be changed only when the current
+ * transfer use MEMORY0.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory)
+{
+ if(memory == MEMORY0)
+ {
+ /* change the memory0 address */
+ hdma->Instance->M0AR = Address;
+ }
+ else
+ {
+ /* change the memory1 address */
+ hdma->Instance->M1AR = Address;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMAEx_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Set the DMA Transfer parameter.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param SrcAddress The source memory Buffer address
+ * @param DstAddress The destination memory Buffer address
+ * @param DataLength The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ /* Configure DMA Stream data length */
+ hdma->Instance->NDTR = DataLength;
+
+ /* Peripheral to Memory */
+ if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
+ {
+ /* Configure DMA Stream destination address */
+ hdma->Instance->PAR = DstAddress;
+
+ /* Configure DMA Stream source address */
+ hdma->Instance->M0AR = SrcAddress;
+ }
+ /* Memory to Peripheral */
+ else
+ {
+ /* Configure DMA Stream source address */
+ hdma->Instance->PAR = SrcAddress;
+
+ /* Configure DMA Stream destination address */
+ hdma->Instance->M0AR = DstAddress;
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_DMA_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_eth.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_eth.c
new file mode 100644
index 00000000..94f044ff
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_eth.c
@@ -0,0 +1,2043 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_eth.c
+ * @author MCD Application Team
+ * @brief ETH HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Ethernet (ETH) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#)Declare a ETH_HandleTypeDef handle structure, for example:
+ ETH_HandleTypeDef heth;
+
+ (#)Fill parameters of Init structure in heth handle
+
+ (#)Call HAL_ETH_Init() API to initialize the Ethernet peripheral (MAC, DMA, ...)
+
+ (#)Initialize the ETH low level resources through the HAL_ETH_MspInit() API:
+ (##) Enable the Ethernet interface clock using
+ (+++) __HAL_RCC_ETHMAC_CLK_ENABLE();
+ (+++) __HAL_RCC_ETHMACTX_CLK_ENABLE();
+ (+++) __HAL_RCC_ETHMACRX_CLK_ENABLE();
+
+ (##) Initialize the related GPIO clocks
+ (##) Configure Ethernet pin-out
+ (##) Configure Ethernet NVIC interrupt (IT mode)
+
+ (#)Initialize Ethernet DMA Descriptors in chain mode and point to allocated buffers:
+ (##) HAL_ETH_DMATxDescListInit(); for Transmission process
+ (##) HAL_ETH_DMARxDescListInit(); for Reception process
+
+ (#)Enable MAC and DMA transmission and reception:
+ (##) HAL_ETH_Start();
+
+ (#)Prepare ETH DMA TX Descriptors and give the hand to ETH DMA to transfer
+ the frame to MAC TX FIFO:
+ (##) HAL_ETH_TransmitFrame();
+
+ (#)Poll for a received frame in ETH RX DMA Descriptors and get received
+ frame parameters
+ (##) HAL_ETH_GetReceivedFrame(); (should be called into an infinite loop)
+
+ (#) Get a received frame when an ETH RX interrupt occurs:
+ (##) HAL_ETH_GetReceivedFrame_IT(); (called in IT mode only)
+
+ (#) Communicate with external PHY device:
+ (##) Read a specific register from the PHY
+ HAL_ETH_ReadPHYRegister();
+ (##) Write data to a specific RHY register:
+ HAL_ETH_WritePHYRegister();
+
+ (#) Configure the Ethernet MAC after ETH peripheral initialization
+ HAL_ETH_ConfigMAC(); all MAC parameters should be filled.
+
+ (#) Configure the Ethernet DMA after ETH peripheral initialization
+ HAL_ETH_ConfigDMA(); all DMA parameters should be filled.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup ETH ETH
+ * @brief ETH HAL module driver
+ * @{
+ */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+#if defined (ETH)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup ETH_Private_Constants ETH Private Constants
+ * @{
+ */
+#define ETH_TIMEOUT_SWRESET ((uint32_t)500)
+#define ETH_TIMEOUT_LINKED_STATE ((uint32_t)5000)
+#define ETH_TIMEOUT_AUTONEGO_COMPLETED ((uint32_t)5000)
+
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup ETH_Private_Functions ETH Private Functions
+ * @{
+ */
+static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth, uint32_t err);
+static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr);
+static void ETH_MACReceptionEnable(ETH_HandleTypeDef *heth);
+static void ETH_MACReceptionDisable(ETH_HandleTypeDef *heth);
+static void ETH_MACTransmissionEnable(ETH_HandleTypeDef *heth);
+static void ETH_MACTransmissionDisable(ETH_HandleTypeDef *heth);
+static void ETH_DMATransmissionEnable(ETH_HandleTypeDef *heth);
+static void ETH_DMATransmissionDisable(ETH_HandleTypeDef *heth);
+static void ETH_DMAReceptionEnable(ETH_HandleTypeDef *heth);
+static void ETH_DMAReceptionDisable(ETH_HandleTypeDef *heth);
+static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth);
+
+/**
+ * @}
+ */
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup ETH_Exported_Functions ETH Exported Functions
+ * @{
+ */
+
+/** @defgroup ETH_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the Ethernet peripheral
+ (+) De-initialize the Ethernet peripheral
+
+ @endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the Ethernet MAC and DMA according to default
+ * parameters.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth)
+{
+ uint32_t tempreg = 0, phyreg = 0;
+ uint32_t hclk = 60000000;
+ uint32_t tickstart = 0;
+ uint32_t err = ETH_SUCCESS;
+
+ /* Check the ETH peripheral state */
+ if(heth == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check parameters */
+ assert_param(IS_ETH_AUTONEGOTIATION(heth->Init.AutoNegotiation));
+ assert_param(IS_ETH_RX_MODE(heth->Init.RxMode));
+ assert_param(IS_ETH_CHECKSUM_MODE(heth->Init.ChecksumMode));
+ assert_param(IS_ETH_MEDIA_INTERFACE(heth->Init.MediaInterface));
+
+ if(heth->State == HAL_ETH_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ heth->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK, NVIC. */
+ HAL_ETH_MspInit(heth);
+ }
+
+ /* Enable SYSCFG Clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Select MII or RMII Mode*/
+ SYSCFG->PMC &= ~(SYSCFG_PMC_MII_RMII_SEL);
+ SYSCFG->PMC |= (uint32_t)heth->Init.MediaInterface;
+
+ /* Ethernet Software reset */
+ /* Set the SWR bit: resets all MAC subsystem internal registers and logic */
+ /* After reset all the registers holds their respective reset values */
+ (heth->Instance)->DMABMR |= ETH_DMABMR_SR;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait for software reset */
+ while (((heth->Instance)->DMABMR & ETH_DMABMR_SR) != (uint32_t)RESET)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > ETH_TIMEOUT_SWRESET)
+ {
+ heth->State= HAL_ETH_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Note: The SWR is not performed if the ETH_RX_CLK or the ETH_TX_CLK are
+ not available, please check your external PHY or the IO configuration */
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /*-------------------------------- MAC Initialization ----------------------*/
+ /* Get the ETHERNET MACMIIAR value */
+ tempreg = (heth->Instance)->MACMIIAR;
+ /* Clear CSR Clock Range CR[2:0] bits */
+ tempreg &= ETH_MACMIIAR_CR_MASK;
+
+ /* Get hclk frequency value */
+ hclk = HAL_RCC_GetHCLKFreq();
+
+ /* Set CR bits depending on hclk value */
+ if((hclk >= 20000000)&&(hclk < 35000000))
+ {
+ /* CSR Clock Range between 20-35 MHz */
+ tempreg |= (uint32_t)ETH_MACMIIAR_CR_Div16;
+ }
+ else if((hclk >= 35000000)&&(hclk < 60000000))
+ {
+ /* CSR Clock Range between 35-60 MHz */
+ tempreg |= (uint32_t)ETH_MACMIIAR_CR_Div26;
+ }
+ else if((hclk >= 60000000)&&(hclk < 100000000))
+ {
+ /* CSR Clock Range between 60-100 MHz */
+ tempreg |= (uint32_t)ETH_MACMIIAR_CR_Div42;
+ }
+ else if((hclk >= 100000000)&&(hclk < 150000000))
+ {
+ /* CSR Clock Range between 100-150 MHz */
+ tempreg |= (uint32_t)ETH_MACMIIAR_CR_Div62;
+ }
+ else /* ((hclk >= 150000000)&&(hclk <= 216000000)) */
+ {
+ /* CSR Clock Range between 150-216 MHz */
+ tempreg |= (uint32_t)ETH_MACMIIAR_CR_Div102;
+ }
+
+ /* Write to ETHERNET MAC MIIAR: Configure the ETHERNET CSR Clock Range */
+ (heth->Instance)->MACMIIAR = (uint32_t)tempreg;
+
+ /*-------------------- PHY initialization and configuration ----------------*/
+ /* Put the PHY in reset mode */
+ if((HAL_ETH_WritePHYRegister(heth, PHY_BCR, PHY_RESET)) != HAL_OK)
+ {
+ /* In case of write timeout */
+ err = ETH_ERROR;
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ /* Set the ETH peripheral state to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Return HAL_ERROR */
+ return HAL_ERROR;
+ }
+
+ /* Delay to assure PHY reset */
+ HAL_Delay(PHY_RESET_DELAY);
+
+ if((heth->Init).AutoNegotiation != ETH_AUTONEGOTIATION_DISABLE)
+ {
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* We wait for linked status */
+ do
+ {
+ HAL_ETH_ReadPHYRegister(heth, PHY_BSR, &phyreg);
+
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > ETH_TIMEOUT_LINKED_STATE)
+ {
+ /* In case of write timeout */
+ err = ETH_ERROR;
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ return HAL_TIMEOUT;
+ }
+ } while (((phyreg & PHY_LINKED_STATUS) != PHY_LINKED_STATUS));
+
+
+ /* Enable Auto-Negotiation */
+ if((HAL_ETH_WritePHYRegister(heth, PHY_BCR, PHY_AUTONEGOTIATION)) != HAL_OK)
+ {
+ /* In case of write timeout */
+ err = ETH_ERROR;
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ /* Set the ETH peripheral state to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Return HAL_ERROR */
+ return HAL_ERROR;
+ }
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until the auto-negotiation will be completed */
+ do
+ {
+ HAL_ETH_ReadPHYRegister(heth, PHY_BSR, &phyreg);
+
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > ETH_TIMEOUT_AUTONEGO_COMPLETED)
+ {
+ /* In case of write timeout */
+ err = ETH_ERROR;
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ return HAL_TIMEOUT;
+ }
+
+ } while (((phyreg & PHY_AUTONEGO_COMPLETE) != PHY_AUTONEGO_COMPLETE));
+
+ /* Read the result of the auto-negotiation */
+ if((HAL_ETH_ReadPHYRegister(heth, PHY_SR, &phyreg)) != HAL_OK)
+ {
+ /* In case of write timeout */
+ err = ETH_ERROR;
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ /* Set the ETH peripheral state to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Return HAL_ERROR */
+ return HAL_ERROR;
+ }
+
+ /* Configure the MAC with the Duplex Mode fixed by the auto-negotiation process */
+ if((phyreg & PHY_DUPLEX_STATUS) != (uint32_t)RESET)
+ {
+ /* Set Ethernet duplex mode to Full-duplex following the auto-negotiation */
+ (heth->Init).DuplexMode = ETH_MODE_FULLDUPLEX;
+ }
+ else
+ {
+ /* Set Ethernet duplex mode to Half-duplex following the auto-negotiation */
+ (heth->Init).DuplexMode = ETH_MODE_HALFDUPLEX;
+ }
+ /* Configure the MAC with the speed fixed by the auto-negotiation process */
+ if((phyreg & PHY_SPEED_STATUS) == PHY_SPEED_STATUS)
+ {
+ /* Set Ethernet speed to 10M following the auto-negotiation */
+ (heth->Init).Speed = ETH_SPEED_10M;
+ }
+ else
+ {
+ /* Set Ethernet speed to 100M following the auto-negotiation */
+ (heth->Init).Speed = ETH_SPEED_100M;
+ }
+ }
+ else /* AutoNegotiation Disable */
+ {
+ /* Check parameters */
+ assert_param(IS_ETH_SPEED(heth->Init.Speed));
+ assert_param(IS_ETH_DUPLEX_MODE(heth->Init.DuplexMode));
+
+ /* Set MAC Speed and Duplex Mode */
+ if(HAL_ETH_WritePHYRegister(heth, PHY_BCR, ((uint16_t)((heth->Init).DuplexMode >> 3) |
+ (uint16_t)((heth->Init).Speed >> 1))) != HAL_OK)
+ {
+ /* In case of write timeout */
+ err = ETH_ERROR;
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ /* Set the ETH peripheral state to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Return HAL_ERROR */
+ return HAL_ERROR;
+ }
+
+ /* Delay to assure PHY configuration */
+ HAL_Delay(PHY_CONFIG_DELAY);
+ }
+
+ /* Config MAC and DMA */
+ ETH_MACDMAConfig(heth, err);
+
+ /* Set ETH HAL State to Ready */
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief De-Initializes the ETH peripheral.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth)
+{
+ /* Set the ETH peripheral state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* De-Init the low level hardware : GPIO, CLOCK, NVIC. */
+ HAL_ETH_MspDeInit(heth);
+
+ /* Set ETH HAL state to Disabled */
+ heth->State= HAL_ETH_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the DMA Tx descriptors in chain mode.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param DMATxDescTab Pointer to the first Tx desc list
+ * @param TxBuff Pointer to the first TxBuffer list
+ * @param TxBuffCount Number of the used Tx desc in the list
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t *TxBuff, uint32_t TxBuffCount)
+{
+ uint32_t i = 0;
+ ETH_DMADescTypeDef *dmatxdesc;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* Set the DMATxDescToSet pointer with the first one of the DMATxDescTab list */
+ heth->TxDesc = DMATxDescTab;
+
+ /* Fill each DMATxDesc descriptor with the right values */
+ for(i=0; i < TxBuffCount; i++)
+ {
+ /* Get the pointer on the ith member of the Tx Desc list */
+ dmatxdesc = DMATxDescTab + i;
+
+ /* Set Second Address Chained bit */
+ dmatxdesc->Status = ETH_DMATXDESC_TCH;
+
+ /* Set Buffer1 address pointer */
+ dmatxdesc->Buffer1Addr = (uint32_t)(&TxBuff[i*ETH_TX_BUF_SIZE]);
+
+ if ((heth->Init).ChecksumMode == ETH_CHECKSUM_BY_HARDWARE)
+ {
+ /* Set the DMA Tx descriptors checksum insertion */
+ dmatxdesc->Status |= ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL;
+ }
+
+ /* Initialize the next descriptor with the Next Descriptor Polling Enable */
+ if(i < (TxBuffCount-1))
+ {
+ /* Set next descriptor address register with next descriptor base address */
+ dmatxdesc->Buffer2NextDescAddr = (uint32_t)(DMATxDescTab+i+1);
+ }
+ else
+ {
+ /* For last descriptor, set next descriptor address register equal to the first descriptor base address */
+ dmatxdesc->Buffer2NextDescAddr = (uint32_t) DMATxDescTab;
+ }
+ }
+
+ /* Set Transmit Descriptor List Address Register */
+ (heth->Instance)->DMATDLAR = (uint32_t) DMATxDescTab;
+
+ /* Set ETH HAL State to Ready */
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the DMA Rx descriptors in chain mode.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param DMARxDescTab Pointer to the first Rx desc list
+ * @param RxBuff Pointer to the first RxBuffer list
+ * @param RxBuffCount Number of the used Rx desc in the list
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount)
+{
+ uint32_t i = 0;
+ ETH_DMADescTypeDef *DMARxDesc;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* Set the Ethernet RxDesc pointer with the first one of the DMARxDescTab list */
+ heth->RxDesc = DMARxDescTab;
+
+ /* Fill each DMARxDesc descriptor with the right values */
+ for(i=0; i < RxBuffCount; i++)
+ {
+ /* Get the pointer on the ith member of the Rx Desc list */
+ DMARxDesc = DMARxDescTab+i;
+
+ /* Set Own bit of the Rx descriptor Status */
+ DMARxDesc->Status = ETH_DMARXDESC_OWN;
+
+ /* Set Buffer1 size and Second Address Chained bit */
+ DMARxDesc->ControlBufferSize = ETH_DMARXDESC_RCH | ETH_RX_BUF_SIZE;
+
+ /* Set Buffer1 address pointer */
+ DMARxDesc->Buffer1Addr = (uint32_t)(&RxBuff[i*ETH_RX_BUF_SIZE]);
+
+ if((heth->Init).RxMode == ETH_RXINTERRUPT_MODE)
+ {
+ /* Enable Ethernet DMA Rx Descriptor interrupt */
+ DMARxDesc->ControlBufferSize &= ~ETH_DMARXDESC_DIC;
+ }
+
+ /* Initialize the next descriptor with the Next Descriptor Polling Enable */
+ if(i < (RxBuffCount-1))
+ {
+ /* Set next descriptor address register with next descriptor base address */
+ DMARxDesc->Buffer2NextDescAddr = (uint32_t)(DMARxDescTab+i+1);
+ }
+ else
+ {
+ /* For last descriptor, set next descriptor address register equal to the first descriptor base address */
+ DMARxDesc->Buffer2NextDescAddr = (uint32_t)(DMARxDescTab);
+ }
+ }
+
+ /* Set Receive Descriptor List Address Register */
+ (heth->Instance)->DMARDLAR = (uint32_t) DMARxDescTab;
+
+ /* Set ETH HAL State to Ready */
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the ETH MSP.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+__weak void HAL_ETH_MspInit(ETH_HandleTypeDef *heth)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(heth);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ETH_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes ETH MSP.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+__weak void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(heth);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ETH_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Exported_Functions_Group2 IO operation functions
+ * @brief Data transfers functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Transmit a frame
+ HAL_ETH_TransmitFrame();
+ (+) Receive a frame
+ HAL_ETH_GetReceivedFrame();
+ HAL_ETH_GetReceivedFrame_IT();
+ (+) Read from an External PHY register
+ HAL_ETH_ReadPHYRegister();
+ (+) Write to an External PHY register
+ HAL_ETH_WritePHYRegister();
+
+ @endverbatim
+
+ * @{
+ */
+
+/**
+ * @brief Sends an Ethernet frame.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param FrameLength Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_TransmitFrame(ETH_HandleTypeDef *heth, uint32_t FrameLength)
+{
+ uint32_t bufcount = 0, size = 0, i = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ if (FrameLength == 0)
+ {
+ /* Set ETH HAL state to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ return HAL_ERROR;
+ }
+
+ /* Check if the descriptor is owned by the ETHERNET DMA (when set) or CPU (when reset) */
+ if(((heth->TxDesc)->Status & ETH_DMATXDESC_OWN) != (uint32_t)RESET)
+ {
+ /* OWN bit set */
+ heth->State = HAL_ETH_STATE_BUSY_TX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ return HAL_ERROR;
+ }
+
+ /* Get the number of needed Tx buffers for the current frame */
+ if (FrameLength > ETH_TX_BUF_SIZE)
+ {
+ bufcount = FrameLength/ETH_TX_BUF_SIZE;
+ if (FrameLength % ETH_TX_BUF_SIZE)
+ {
+ bufcount++;
+ }
+ }
+ else
+ {
+ bufcount = 1;
+ }
+ if (bufcount == 1)
+ {
+ /* Set LAST and FIRST segment */
+ heth->TxDesc->Status |=ETH_DMATXDESC_FS|ETH_DMATXDESC_LS;
+ /* Set frame size */
+ heth->TxDesc->ControlBufferSize = (FrameLength & ETH_DMATXDESC_TBS1);
+ /* Set Own bit of the Tx descriptor Status: gives the buffer back to ETHERNET DMA */
+ heth->TxDesc->Status |= ETH_DMATXDESC_OWN;
+ /* Point to next descriptor */
+ heth->TxDesc= (ETH_DMADescTypeDef *)(heth->TxDesc->Buffer2NextDescAddr);
+ }
+ else
+ {
+ for (i=0; i< bufcount; i++)
+ {
+ /* Clear FIRST and LAST segment bits */
+ heth->TxDesc->Status &= ~(ETH_DMATXDESC_FS | ETH_DMATXDESC_LS);
+
+ if (i == 0)
+ {
+ /* Setting the first segment bit */
+ heth->TxDesc->Status |= ETH_DMATXDESC_FS;
+ }
+
+ /* Program size */
+ heth->TxDesc->ControlBufferSize = (ETH_TX_BUF_SIZE & ETH_DMATXDESC_TBS1);
+
+ if (i == (bufcount-1))
+ {
+ /* Setting the last segment bit */
+ heth->TxDesc->Status |= ETH_DMATXDESC_LS;
+ size = FrameLength - (bufcount-1)*ETH_TX_BUF_SIZE;
+ heth->TxDesc->ControlBufferSize = (size & ETH_DMATXDESC_TBS1);
+ }
+
+ /* Set Own bit of the Tx descriptor Status: gives the buffer back to ETHERNET DMA */
+ heth->TxDesc->Status |= ETH_DMATXDESC_OWN;
+ /* point to next descriptor */
+ heth->TxDesc = (ETH_DMADescTypeDef *)(heth->TxDesc->Buffer2NextDescAddr);
+ }
+ }
+
+ /* When Tx Buffer unavailable flag is set: clear it and resume transmission */
+ if (((heth->Instance)->DMASR & ETH_DMASR_TBUS) != (uint32_t)RESET)
+ {
+ /* Clear TBUS ETHERNET DMA flag */
+ (heth->Instance)->DMASR = ETH_DMASR_TBUS;
+ /* Resume DMA transmission*/
+ (heth->Instance)->DMATPDR = 0;
+ }
+
+ /* Set ETH HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Checks for received frames.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame(ETH_HandleTypeDef *heth)
+{
+ uint32_t framelength = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Check the ETH state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* Check if segment is not owned by DMA */
+ /* (((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET) && ((heth->RxDesc->Status & ETH_DMARXDESC_LS) != (uint32_t)RESET)) */
+ if(((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET))
+ {
+ /* Check if last segment */
+ if(((heth->RxDesc->Status & ETH_DMARXDESC_LS) != (uint32_t)RESET))
+ {
+ /* increment segment count */
+ (heth->RxFrameInfos).SegCount++;
+
+ /* Check if last segment is first segment: one segment contains the frame */
+ if ((heth->RxFrameInfos).SegCount == 1)
+ {
+ (heth->RxFrameInfos).FSRxDesc =heth->RxDesc;
+ }
+
+ heth->RxFrameInfos.LSRxDesc = heth->RxDesc;
+
+ /* Get the Frame Length of the received packet: substruct 4 bytes of the CRC */
+ framelength = (((heth->RxDesc)->Status & ETH_DMARXDESC_FL) >> ETH_DMARXDESC_FRAMELENGTHSHIFT) - 4;
+ heth->RxFrameInfos.length = framelength;
+
+ /* Get the address of the buffer start address */
+ heth->RxFrameInfos.buffer = ((heth->RxFrameInfos).FSRxDesc)->Buffer1Addr;
+ /* point to next descriptor */
+ heth->RxDesc = (ETH_DMADescTypeDef*) ((heth->RxDesc)->Buffer2NextDescAddr);
+
+ /* Set HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ /* Check if first segment */
+ else if((heth->RxDesc->Status & ETH_DMARXDESC_FS) != (uint32_t)RESET)
+ {
+ (heth->RxFrameInfos).FSRxDesc = heth->RxDesc;
+ (heth->RxFrameInfos).LSRxDesc = NULL;
+ (heth->RxFrameInfos).SegCount = 1;
+ /* Point to next descriptor */
+ heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+ }
+ /* Check if intermediate segment */
+ else
+ {
+ (heth->RxFrameInfos).SegCount++;
+ /* Point to next descriptor */
+ heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+ }
+ }
+
+ /* Set ETH HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_ERROR;
+}
+
+/**
+ * @brief Gets the Received frame in interrupt mode.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame_IT(ETH_HandleTypeDef *heth)
+{
+ uint32_t descriptorscancounter = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set ETH HAL State to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* Scan descriptors owned by CPU */
+ while (((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET) && (descriptorscancounter < ETH_RXBUFNB))
+ {
+ /* Just for security */
+ descriptorscancounter++;
+
+ /* Check if first segment in frame */
+ /* ((heth->RxDesc->Status & ETH_DMARXDESC_FS) != (uint32_t)RESET) && ((heth->RxDesc->Status & ETH_DMARXDESC_LS) == (uint32_t)RESET)) */
+ if((heth->RxDesc->Status & (ETH_DMARXDESC_FS | ETH_DMARXDESC_LS)) == (uint32_t)ETH_DMARXDESC_FS)
+ {
+ heth->RxFrameInfos.FSRxDesc = heth->RxDesc;
+ heth->RxFrameInfos.SegCount = 1;
+ /* Point to next descriptor */
+ heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+ }
+ /* Check if intermediate segment */
+ /* ((heth->RxDesc->Status & ETH_DMARXDESC_LS) == (uint32_t)RESET)&& ((heth->RxDesc->Status & ETH_DMARXDESC_FS) == (uint32_t)RESET)) */
+ else if ((heth->RxDesc->Status & (ETH_DMARXDESC_LS | ETH_DMARXDESC_FS)) == (uint32_t)RESET)
+ {
+ /* Increment segment count */
+ (heth->RxFrameInfos.SegCount)++;
+ /* Point to next descriptor */
+ heth->RxDesc = (ETH_DMADescTypeDef*)(heth->RxDesc->Buffer2NextDescAddr);
+ }
+ /* Should be last segment */
+ else
+ {
+ /* Last segment */
+ heth->RxFrameInfos.LSRxDesc = heth->RxDesc;
+
+ /* Increment segment count */
+ (heth->RxFrameInfos.SegCount)++;
+
+ /* Check if last segment is first segment: one segment contains the frame */
+ if ((heth->RxFrameInfos.SegCount) == 1)
+ {
+ heth->RxFrameInfos.FSRxDesc = heth->RxDesc;
+ }
+
+ /* Get the Frame Length of the received packet: substruct 4 bytes of the CRC */
+ heth->RxFrameInfos.length = (((heth->RxDesc)->Status & ETH_DMARXDESC_FL) >> ETH_DMARXDESC_FRAMELENGTHSHIFT) - 4;
+
+ /* Get the address of the buffer start address */
+ heth->RxFrameInfos.buffer =((heth->RxFrameInfos).FSRxDesc)->Buffer1Addr;
+
+ /* Point to next descriptor */
+ heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+
+ /* Set HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ }
+
+ /* Set HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_ERROR;
+}
+
+/**
+ * @brief This function handles ETH interrupt request.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth)
+{
+ /* Frame received */
+ if (__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_R))
+ {
+ /* Receive complete callback */
+ HAL_ETH_RxCpltCallback(heth);
+
+ /* Clear the Eth DMA Rx IT pending bits */
+ __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_R);
+
+ /* Set HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ }
+ /* Frame transmitted */
+ else if (__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_T))
+ {
+ /* Transfer complete callback */
+ HAL_ETH_TxCpltCallback(heth);
+
+ /* Clear the Eth DMA Tx IT pending bits */
+ __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_T);
+
+ /* Set HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+ }
+
+ /* Clear the interrupt flags */
+ __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_NIS);
+
+ /* ETH DMA Error */
+ if(__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_AIS))
+ {
+ /* Ethernet Error callback */
+ HAL_ETH_ErrorCallback(heth);
+
+ /* Clear the interrupt flags */
+ __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_FLAG_AIS);
+
+ /* Set HAL State to Ready */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+ }
+}
+
+/**
+ * @brief Tx Transfer completed callbacks.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+__weak void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(heth);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ETH_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+__weak void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(heth);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ETH_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Ethernet transfer error callbacks
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+__weak void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(heth);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_ETH_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Reads a PHY register
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param PHYReg PHY register address, is the index of one of the 32 PHY register.
+ * This parameter can be one of the following values:
+ * PHY_BCR: Transceiver Basic Control Register,
+ * PHY_BSR: Transceiver Basic Status Register.
+ * More PHY register could be read depending on the used PHY
+ * @param RegValue PHY register value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue)
+{
+ uint32_t tmpreg = 0;
+ uint32_t tickstart = 0;
+
+ /* Check parameters */
+ assert_param(IS_ETH_PHY_ADDRESS(heth->Init.PhyAddress));
+
+ /* Check the ETH peripheral state */
+ if(heth->State == HAL_ETH_STATE_BUSY_RD)
+ {
+ return HAL_BUSY;
+ }
+ /* Set ETH HAL State to BUSY_RD */
+ heth->State = HAL_ETH_STATE_BUSY_RD;
+
+ /* Get the ETHERNET MACMIIAR value */
+ tmpreg = heth->Instance->MACMIIAR;
+
+ /* Keep only the CSR Clock Range CR[2:0] bits value */
+ tmpreg &= ~ETH_MACMIIAR_CR_MASK;
+
+ /* Prepare the MII address register value */
+ tmpreg |=(((uint32_t)heth->Init.PhyAddress << 11) & ETH_MACMIIAR_PA); /* Set the PHY device address */
+ tmpreg |=(((uint32_t)PHYReg<<6) & ETH_MACMIIAR_MR); /* Set the PHY register address */
+ tmpreg &= ~ETH_MACMIIAR_MW; /* Set the read mode */
+ tmpreg |= ETH_MACMIIAR_MB; /* Set the MII Busy bit */
+
+ /* Write the result value into the MII Address register */
+ heth->Instance->MACMIIAR = tmpreg;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Check for the Busy flag */
+ while((tmpreg & ETH_MACMIIAR_MB) == ETH_MACMIIAR_MB)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > PHY_READ_TO)
+ {
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ return HAL_TIMEOUT;
+ }
+
+ tmpreg = heth->Instance->MACMIIAR;
+ }
+
+ /* Get MACMIIDR value */
+ *RegValue = (uint16_t)(heth->Instance->MACMIIDR);
+
+ /* Set ETH HAL State to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Writes to a PHY register.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param PHYReg PHY register address, is the index of one of the 32 PHY register.
+ * This parameter can be one of the following values:
+ * PHY_BCR: Transceiver Control Register.
+ * More PHY register could be written depending on the used PHY
+ * @param RegValue the value to write
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t RegValue)
+{
+ uint32_t tmpreg = 0;
+ uint32_t tickstart = 0;
+
+ /* Check parameters */
+ assert_param(IS_ETH_PHY_ADDRESS(heth->Init.PhyAddress));
+
+ /* Check the ETH peripheral state */
+ if(heth->State == HAL_ETH_STATE_BUSY_WR)
+ {
+ return HAL_BUSY;
+ }
+ /* Set ETH HAL State to BUSY_WR */
+ heth->State = HAL_ETH_STATE_BUSY_WR;
+
+ /* Get the ETHERNET MACMIIAR value */
+ tmpreg = heth->Instance->MACMIIAR;
+
+ /* Keep only the CSR Clock Range CR[2:0] bits value */
+ tmpreg &= ~ETH_MACMIIAR_CR_MASK;
+
+ /* Prepare the MII register address value */
+ tmpreg |=(((uint32_t)heth->Init.PhyAddress<<11) & ETH_MACMIIAR_PA); /* Set the PHY device address */
+ tmpreg |=(((uint32_t)PHYReg<<6) & ETH_MACMIIAR_MR); /* Set the PHY register address */
+ tmpreg |= ETH_MACMIIAR_MW; /* Set the write mode */
+ tmpreg |= ETH_MACMIIAR_MB; /* Set the MII Busy bit */
+
+ /* Give the value to the MII data register */
+ heth->Instance->MACMIIDR = (uint16_t)RegValue;
+
+ /* Write the result value into the MII Address register */
+ heth->Instance->MACMIIAR = tmpreg;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Check for the Busy flag */
+ while((tmpreg & ETH_MACMIIAR_MB) == ETH_MACMIIAR_MB)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > PHY_WRITE_TO)
+ {
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ return HAL_TIMEOUT;
+ }
+
+ tmpreg = heth->Instance->MACMIIAR;
+ }
+
+ /* Set ETH HAL State to READY */
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Enable MAC and DMA transmission and reception.
+ HAL_ETH_Start();
+ (+) Disable MAC and DMA transmission and reception.
+ HAL_ETH_Stop();
+ (+) Set the MAC configuration in runtime mode
+ HAL_ETH_ConfigMAC();
+ (+) Set the DMA configuration in runtime mode
+ HAL_ETH_ConfigDMA();
+
+@endverbatim
+ * @{
+ */
+
+ /**
+ * @brief Enables Ethernet MAC and DMA reception/transmission
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth)
+{
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* Enable transmit state machine of the MAC for transmission on the MII */
+ ETH_MACTransmissionEnable(heth);
+
+ /* Enable receive state machine of the MAC for reception from the MII */
+ ETH_MACReceptionEnable(heth);
+
+ /* Flush Transmit FIFO */
+ ETH_FlushTransmitFIFO(heth);
+
+ /* Start DMA transmission */
+ ETH_DMATransmissionEnable(heth);
+
+ /* Start DMA reception */
+ ETH_DMAReceptionEnable(heth);
+
+ /* Set the ETH state to READY*/
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop Ethernet MAC and DMA reception/transmission
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth)
+{
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State = HAL_ETH_STATE_BUSY;
+
+ /* Stop DMA transmission */
+ ETH_DMATransmissionDisable(heth);
+
+ /* Stop DMA reception */
+ ETH_DMAReceptionDisable(heth);
+
+ /* Disable receive state machine of the MAC for reception from the MII */
+ ETH_MACReceptionDisable(heth);
+
+ /* Flush Transmit FIFO */
+ ETH_FlushTransmitFIFO(heth);
+
+ /* Disable transmit state machine of the MAC for transmission on the MII */
+ ETH_MACTransmissionDisable(heth);
+
+ /* Set the ETH state*/
+ heth->State = HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Set ETH MAC Configuration.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param macconf MAC Configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_ConfigMAC(ETH_HandleTypeDef *heth, ETH_MACInitTypeDef *macconf)
+{
+ uint32_t tmpreg = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State= HAL_ETH_STATE_BUSY;
+
+ assert_param(IS_ETH_SPEED(heth->Init.Speed));
+ assert_param(IS_ETH_DUPLEX_MODE(heth->Init.DuplexMode));
+
+ if (macconf != NULL)
+ {
+ /* Check the parameters */
+ assert_param(IS_ETH_WATCHDOG(macconf->Watchdog));
+ assert_param(IS_ETH_JABBER(macconf->Jabber));
+ assert_param(IS_ETH_INTER_FRAME_GAP(macconf->InterFrameGap));
+ assert_param(IS_ETH_CARRIER_SENSE(macconf->CarrierSense));
+ assert_param(IS_ETH_RECEIVE_OWN(macconf->ReceiveOwn));
+ assert_param(IS_ETH_LOOPBACK_MODE(macconf->LoopbackMode));
+ assert_param(IS_ETH_CHECKSUM_OFFLOAD(macconf->ChecksumOffload));
+ assert_param(IS_ETH_RETRY_TRANSMISSION(macconf->RetryTransmission));
+ assert_param(IS_ETH_AUTOMATIC_PADCRC_STRIP(macconf->AutomaticPadCRCStrip));
+ assert_param(IS_ETH_BACKOFF_LIMIT(macconf->BackOffLimit));
+ assert_param(IS_ETH_DEFERRAL_CHECK(macconf->DeferralCheck));
+ assert_param(IS_ETH_RECEIVE_ALL(macconf->ReceiveAll));
+ assert_param(IS_ETH_SOURCE_ADDR_FILTER(macconf->SourceAddrFilter));
+ assert_param(IS_ETH_CONTROL_FRAMES(macconf->PassControlFrames));
+ assert_param(IS_ETH_BROADCAST_FRAMES_RECEPTION(macconf->BroadcastFramesReception));
+ assert_param(IS_ETH_DESTINATION_ADDR_FILTER(macconf->DestinationAddrFilter));
+ assert_param(IS_ETH_PROMISCUOUS_MODE(macconf->PromiscuousMode));
+ assert_param(IS_ETH_MULTICAST_FRAMES_FILTER(macconf->MulticastFramesFilter));
+ assert_param(IS_ETH_UNICAST_FRAMES_FILTER(macconf->UnicastFramesFilter));
+ assert_param(IS_ETH_PAUSE_TIME(macconf->PauseTime));
+ assert_param(IS_ETH_ZEROQUANTA_PAUSE(macconf->ZeroQuantaPause));
+ assert_param(IS_ETH_PAUSE_LOW_THRESHOLD(macconf->PauseLowThreshold));
+ assert_param(IS_ETH_UNICAST_PAUSE_FRAME_DETECT(macconf->UnicastPauseFrameDetect));
+ assert_param(IS_ETH_RECEIVE_FLOWCONTROL(macconf->ReceiveFlowControl));
+ assert_param(IS_ETH_TRANSMIT_FLOWCONTROL(macconf->TransmitFlowControl));
+ assert_param(IS_ETH_VLAN_TAG_COMPARISON(macconf->VLANTagComparison));
+ assert_param(IS_ETH_VLAN_TAG_IDENTIFIER(macconf->VLANTagIdentifier));
+
+ /*------------------------ ETHERNET MACCR Configuration --------------------*/
+ /* Get the ETHERNET MACCR value */
+ tmpreg = (heth->Instance)->MACCR;
+ /* Clear WD, PCE, PS, TE and RE bits */
+ tmpreg &= ETH_MACCR_CLEAR_MASK;
+
+ tmpreg |= (uint32_t)(macconf->Watchdog |
+ macconf->Jabber |
+ macconf->InterFrameGap |
+ macconf->CarrierSense |
+ (heth->Init).Speed |
+ macconf->ReceiveOwn |
+ macconf->LoopbackMode |
+ (heth->Init).DuplexMode |
+ macconf->ChecksumOffload |
+ macconf->RetryTransmission |
+ macconf->AutomaticPadCRCStrip |
+ macconf->BackOffLimit |
+ macconf->DeferralCheck);
+
+ /* Write to ETHERNET MACCR */
+ (heth->Instance)->MACCR = (uint32_t)tmpreg;
+
+ /* Wait until the write operation will be taken into account :
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg;
+
+ /*----------------------- ETHERNET MACFFR Configuration --------------------*/
+ /* Write to ETHERNET MACFFR */
+ (heth->Instance)->MACFFR = (uint32_t)(macconf->ReceiveAll |
+ macconf->SourceAddrFilter |
+ macconf->PassControlFrames |
+ macconf->BroadcastFramesReception |
+ macconf->DestinationAddrFilter |
+ macconf->PromiscuousMode |
+ macconf->MulticastFramesFilter |
+ macconf->UnicastFramesFilter);
+
+ /* Wait until the write operation will be taken into account :
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACFFR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACFFR = tmpreg;
+
+ /*--------------- ETHERNET MACHTHR and MACHTLR Configuration ---------------*/
+ /* Write to ETHERNET MACHTHR */
+ (heth->Instance)->MACHTHR = (uint32_t)macconf->HashTableHigh;
+
+ /* Write to ETHERNET MACHTLR */
+ (heth->Instance)->MACHTLR = (uint32_t)macconf->HashTableLow;
+ /*----------------------- ETHERNET MACFCR Configuration --------------------*/
+
+ /* Get the ETHERNET MACFCR value */
+ tmpreg = (heth->Instance)->MACFCR;
+ /* Clear xx bits */
+ tmpreg &= ETH_MACFCR_CLEAR_MASK;
+
+ tmpreg |= (uint32_t)((macconf->PauseTime << 16) |
+ macconf->ZeroQuantaPause |
+ macconf->PauseLowThreshold |
+ macconf->UnicastPauseFrameDetect |
+ macconf->ReceiveFlowControl |
+ macconf->TransmitFlowControl);
+
+ /* Write to ETHERNET MACFCR */
+ (heth->Instance)->MACFCR = (uint32_t)tmpreg;
+
+ /* Wait until the write operation will be taken into account :
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACFCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACFCR = tmpreg;
+
+ /*----------------------- ETHERNET MACVLANTR Configuration -----------------*/
+ (heth->Instance)->MACVLANTR = (uint32_t)(macconf->VLANTagComparison |
+ macconf->VLANTagIdentifier);
+
+ /* Wait until the write operation will be taken into account :
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACVLANTR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACVLANTR = tmpreg;
+ }
+ else /* macconf == NULL : here we just configure Speed and Duplex mode */
+ {
+ /*------------------------ ETHERNET MACCR Configuration --------------------*/
+ /* Get the ETHERNET MACCR value */
+ tmpreg = (heth->Instance)->MACCR;
+
+ /* Clear FES and DM bits */
+ tmpreg &= ~((uint32_t)0x00004800);
+
+ tmpreg |= (uint32_t)(heth->Init.Speed | heth->Init.DuplexMode);
+
+ /* Write to ETHERNET MACCR */
+ (heth->Instance)->MACCR = (uint32_t)tmpreg;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg;
+ }
+
+ /* Set the ETH state to Ready */
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Sets ETH DMA Configuration.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param dmaconf DMA Configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_ETH_ConfigDMA(ETH_HandleTypeDef *heth, ETH_DMAInitTypeDef *dmaconf)
+{
+ uint32_t tmpreg = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(heth);
+
+ /* Set the ETH peripheral state to BUSY */
+ heth->State= HAL_ETH_STATE_BUSY;
+
+ /* Check parameters */
+ assert_param(IS_ETH_DROP_TCPIP_CHECKSUM_FRAME(dmaconf->DropTCPIPChecksumErrorFrame));
+ assert_param(IS_ETH_RECEIVE_STORE_FORWARD(dmaconf->ReceiveStoreForward));
+ assert_param(IS_ETH_FLUSH_RECEIVE_FRAME(dmaconf->FlushReceivedFrame));
+ assert_param(IS_ETH_TRANSMIT_STORE_FORWARD(dmaconf->TransmitStoreForward));
+ assert_param(IS_ETH_TRANSMIT_THRESHOLD_CONTROL(dmaconf->TransmitThresholdControl));
+ assert_param(IS_ETH_FORWARD_ERROR_FRAMES(dmaconf->ForwardErrorFrames));
+ assert_param(IS_ETH_FORWARD_UNDERSIZED_GOOD_FRAMES(dmaconf->ForwardUndersizedGoodFrames));
+ assert_param(IS_ETH_RECEIVE_THRESHOLD_CONTROL(dmaconf->ReceiveThresholdControl));
+ assert_param(IS_ETH_SECOND_FRAME_OPERATE(dmaconf->SecondFrameOperate));
+ assert_param(IS_ETH_ADDRESS_ALIGNED_BEATS(dmaconf->AddressAlignedBeats));
+ assert_param(IS_ETH_FIXED_BURST(dmaconf->FixedBurst));
+ assert_param(IS_ETH_RXDMA_BURST_LENGTH(dmaconf->RxDMABurstLength));
+ assert_param(IS_ETH_TXDMA_BURST_LENGTH(dmaconf->TxDMABurstLength));
+ assert_param(IS_ETH_ENHANCED_DESCRIPTOR_FORMAT(dmaconf->EnhancedDescriptorFormat));
+ assert_param(IS_ETH_DMA_DESC_SKIP_LENGTH(dmaconf->DescriptorSkipLength));
+ assert_param(IS_ETH_DMA_ARBITRATION_ROUNDROBIN_RXTX(dmaconf->DMAArbitration));
+
+ /*----------------------- ETHERNET DMAOMR Configuration --------------------*/
+ /* Get the ETHERNET DMAOMR value */
+ tmpreg = (heth->Instance)->DMAOMR;
+ /* Clear xx bits */
+ tmpreg &= ETH_DMAOMR_CLEAR_MASK;
+
+ tmpreg |= (uint32_t)(dmaconf->DropTCPIPChecksumErrorFrame |
+ dmaconf->ReceiveStoreForward |
+ dmaconf->FlushReceivedFrame |
+ dmaconf->TransmitStoreForward |
+ dmaconf->TransmitThresholdControl |
+ dmaconf->ForwardErrorFrames |
+ dmaconf->ForwardUndersizedGoodFrames |
+ dmaconf->ReceiveThresholdControl |
+ dmaconf->SecondFrameOperate);
+
+ /* Write to ETHERNET DMAOMR */
+ (heth->Instance)->DMAOMR = (uint32_t)tmpreg;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->DMAOMR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->DMAOMR = tmpreg;
+
+ /*----------------------- ETHERNET DMABMR Configuration --------------------*/
+ (heth->Instance)->DMABMR = (uint32_t)(dmaconf->AddressAlignedBeats |
+ dmaconf->FixedBurst |
+ dmaconf->RxDMABurstLength | /* !! if 4xPBL is selected for Tx or Rx it is applied for the other */
+ dmaconf->TxDMABurstLength |
+ dmaconf->EnhancedDescriptorFormat |
+ (dmaconf->DescriptorSkipLength << 2) |
+ dmaconf->DMAArbitration |
+ ETH_DMABMR_USP); /* Enable use of separate PBL for Rx and Tx */
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->DMABMR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->DMABMR = tmpreg;
+
+ /* Set the ETH state to Ready */
+ heth->State= HAL_ETH_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(heth);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+ (+) Get the ETH handle state:
+ HAL_ETH_GetState();
+
+
+ @endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the ETH HAL state
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval HAL state
+ */
+HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth)
+{
+ /* Return ETH state */
+ return heth->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup ETH_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Configures Ethernet MAC and DMA with default parameters.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param err Ethernet Init error
+ * @retval HAL status
+ */
+static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth, uint32_t err)
+{
+ ETH_MACInitTypeDef macinit;
+ ETH_DMAInitTypeDef dmainit;
+ uint32_t tmpreg = 0;
+
+ if (err != ETH_SUCCESS) /* Auto-negotiation failed */
+ {
+ /* Set Ethernet duplex mode to Full-duplex */
+ (heth->Init).DuplexMode = ETH_MODE_FULLDUPLEX;
+
+ /* Set Ethernet speed to 100M */
+ (heth->Init).Speed = ETH_SPEED_100M;
+ }
+
+ /* Ethernet MAC default initialization **************************************/
+ macinit.Watchdog = ETH_WATCHDOG_ENABLE;
+ macinit.Jabber = ETH_JABBER_ENABLE;
+ macinit.InterFrameGap = ETH_INTERFRAMEGAP_96BIT;
+ macinit.CarrierSense = ETH_CARRIERSENCE_ENABLE;
+ macinit.ReceiveOwn = ETH_RECEIVEOWN_ENABLE;
+ macinit.LoopbackMode = ETH_LOOPBACKMODE_DISABLE;
+ if(heth->Init.ChecksumMode == ETH_CHECKSUM_BY_HARDWARE)
+ {
+ macinit.ChecksumOffload = ETH_CHECKSUMOFFLAOD_ENABLE;
+ }
+ else
+ {
+ macinit.ChecksumOffload = ETH_CHECKSUMOFFLAOD_DISABLE;
+ }
+ macinit.RetryTransmission = ETH_RETRYTRANSMISSION_DISABLE;
+ macinit.AutomaticPadCRCStrip = ETH_AUTOMATICPADCRCSTRIP_DISABLE;
+ macinit.BackOffLimit = ETH_BACKOFFLIMIT_10;
+ macinit.DeferralCheck = ETH_DEFFERRALCHECK_DISABLE;
+ macinit.ReceiveAll = ETH_RECEIVEAll_DISABLE;
+ macinit.SourceAddrFilter = ETH_SOURCEADDRFILTER_DISABLE;
+ macinit.PassControlFrames = ETH_PASSCONTROLFRAMES_BLOCKALL;
+ macinit.BroadcastFramesReception = ETH_BROADCASTFRAMESRECEPTION_ENABLE;
+ macinit.DestinationAddrFilter = ETH_DESTINATIONADDRFILTER_NORMAL;
+ macinit.PromiscuousMode = ETH_PROMISCUOUS_MODE_DISABLE;
+ macinit.MulticastFramesFilter = ETH_MULTICASTFRAMESFILTER_PERFECT;
+ macinit.UnicastFramesFilter = ETH_UNICASTFRAMESFILTER_PERFECT;
+ macinit.HashTableHigh = 0x0;
+ macinit.HashTableLow = 0x0;
+ macinit.PauseTime = 0x0;
+ macinit.ZeroQuantaPause = ETH_ZEROQUANTAPAUSE_DISABLE;
+ macinit.PauseLowThreshold = ETH_PAUSELOWTHRESHOLD_MINUS4;
+ macinit.UnicastPauseFrameDetect = ETH_UNICASTPAUSEFRAMEDETECT_DISABLE;
+ macinit.ReceiveFlowControl = ETH_RECEIVEFLOWCONTROL_DISABLE;
+ macinit.TransmitFlowControl = ETH_TRANSMITFLOWCONTROL_DISABLE;
+ macinit.VLANTagComparison = ETH_VLANTAGCOMPARISON_16BIT;
+ macinit.VLANTagIdentifier = 0x0;
+
+ /*------------------------ ETHERNET MACCR Configuration --------------------*/
+ /* Get the ETHERNET MACCR value */
+ tmpreg = (heth->Instance)->MACCR;
+ /* Clear WD, PCE, PS, TE and RE bits */
+ tmpreg &= ETH_MACCR_CLEAR_MASK;
+ /* Set the WD bit according to ETH Watchdog value */
+ /* Set the JD: bit according to ETH Jabber value */
+ /* Set the IFG bit according to ETH InterFrameGap value */
+ /* Set the DCRS bit according to ETH CarrierSense value */
+ /* Set the FES bit according to ETH Speed value */
+ /* Set the DO bit according to ETH ReceiveOwn value */
+ /* Set the LM bit according to ETH LoopbackMode value */
+ /* Set the DM bit according to ETH Mode value */
+ /* Set the IPCO bit according to ETH ChecksumOffload value */
+ /* Set the DR bit according to ETH RetryTransmission value */
+ /* Set the ACS bit according to ETH AutomaticPadCRCStrip value */
+ /* Set the BL bit according to ETH BackOffLimit value */
+ /* Set the DC bit according to ETH DeferralCheck value */
+ tmpreg |= (uint32_t)(macinit.Watchdog |
+ macinit.Jabber |
+ macinit.InterFrameGap |
+ macinit.CarrierSense |
+ (heth->Init).Speed |
+ macinit.ReceiveOwn |
+ macinit.LoopbackMode |
+ (heth->Init).DuplexMode |
+ macinit.ChecksumOffload |
+ macinit.RetryTransmission |
+ macinit.AutomaticPadCRCStrip |
+ macinit.BackOffLimit |
+ macinit.DeferralCheck);
+
+ /* Write to ETHERNET MACCR */
+ (heth->Instance)->MACCR = (uint32_t)tmpreg;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg;
+
+ /*----------------------- ETHERNET MACFFR Configuration --------------------*/
+ /* Set the RA bit according to ETH ReceiveAll value */
+ /* Set the SAF and SAIF bits according to ETH SourceAddrFilter value */
+ /* Set the PCF bit according to ETH PassControlFrames value */
+ /* Set the DBF bit according to ETH BroadcastFramesReception value */
+ /* Set the DAIF bit according to ETH DestinationAddrFilter value */
+ /* Set the PR bit according to ETH PromiscuousMode value */
+ /* Set the PM, HMC and HPF bits according to ETH MulticastFramesFilter value */
+ /* Set the HUC and HPF bits according to ETH UnicastFramesFilter value */
+ /* Write to ETHERNET MACFFR */
+ (heth->Instance)->MACFFR = (uint32_t)(macinit.ReceiveAll |
+ macinit.SourceAddrFilter |
+ macinit.PassControlFrames |
+ macinit.BroadcastFramesReception |
+ macinit.DestinationAddrFilter |
+ macinit.PromiscuousMode |
+ macinit.MulticastFramesFilter |
+ macinit.UnicastFramesFilter);
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACFFR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACFFR = tmpreg;
+
+ /*--------------- ETHERNET MACHTHR and MACHTLR Configuration --------------*/
+ /* Write to ETHERNET MACHTHR */
+ (heth->Instance)->MACHTHR = (uint32_t)macinit.HashTableHigh;
+
+ /* Write to ETHERNET MACHTLR */
+ (heth->Instance)->MACHTLR = (uint32_t)macinit.HashTableLow;
+ /*----------------------- ETHERNET MACFCR Configuration -------------------*/
+
+ /* Get the ETHERNET MACFCR value */
+ tmpreg = (heth->Instance)->MACFCR;
+ /* Clear xx bits */
+ tmpreg &= ETH_MACFCR_CLEAR_MASK;
+
+ /* Set the PT bit according to ETH PauseTime value */
+ /* Set the DZPQ bit according to ETH ZeroQuantaPause value */
+ /* Set the PLT bit according to ETH PauseLowThreshold value */
+ /* Set the UP bit according to ETH UnicastPauseFrameDetect value */
+ /* Set the RFE bit according to ETH ReceiveFlowControl value */
+ /* Set the TFE bit according to ETH TransmitFlowControl value */
+ tmpreg |= (uint32_t)((macinit.PauseTime << 16) |
+ macinit.ZeroQuantaPause |
+ macinit.PauseLowThreshold |
+ macinit.UnicastPauseFrameDetect |
+ macinit.ReceiveFlowControl |
+ macinit.TransmitFlowControl);
+
+ /* Write to ETHERNET MACFCR */
+ (heth->Instance)->MACFCR = (uint32_t)tmpreg;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACFCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACFCR = tmpreg;
+
+ /*----------------------- ETHERNET MACVLANTR Configuration ----------------*/
+ /* Set the ETV bit according to ETH VLANTagComparison value */
+ /* Set the VL bit according to ETH VLANTagIdentifier value */
+ (heth->Instance)->MACVLANTR = (uint32_t)(macinit.VLANTagComparison |
+ macinit.VLANTagIdentifier);
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACVLANTR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACVLANTR = tmpreg;
+
+ /* Ethernet DMA default initialization ************************************/
+ dmainit.DropTCPIPChecksumErrorFrame = ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE;
+ dmainit.ReceiveStoreForward = ETH_RECEIVESTOREFORWARD_ENABLE;
+ dmainit.FlushReceivedFrame = ETH_FLUSHRECEIVEDFRAME_ENABLE;
+ dmainit.TransmitStoreForward = ETH_TRANSMITSTOREFORWARD_ENABLE;
+ dmainit.TransmitThresholdControl = ETH_TRANSMITTHRESHOLDCONTROL_64BYTES;
+ dmainit.ForwardErrorFrames = ETH_FORWARDERRORFRAMES_DISABLE;
+ dmainit.ForwardUndersizedGoodFrames = ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE;
+ dmainit.ReceiveThresholdControl = ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES;
+ dmainit.SecondFrameOperate = ETH_SECONDFRAMEOPERARTE_ENABLE;
+ dmainit.AddressAlignedBeats = ETH_ADDRESSALIGNEDBEATS_ENABLE;
+ dmainit.FixedBurst = ETH_FIXEDBURST_ENABLE;
+ dmainit.RxDMABurstLength = ETH_RXDMABURSTLENGTH_32BEAT;
+ dmainit.TxDMABurstLength = ETH_TXDMABURSTLENGTH_32BEAT;
+ dmainit.EnhancedDescriptorFormat = ETH_DMAENHANCEDDESCRIPTOR_ENABLE;
+ dmainit.DescriptorSkipLength = 0x0;
+ dmainit.DMAArbitration = ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1;
+
+ /* Get the ETHERNET DMAOMR value */
+ tmpreg = (heth->Instance)->DMAOMR;
+ /* Clear xx bits */
+ tmpreg &= ETH_DMAOMR_CLEAR_MASK;
+
+ /* Set the DT bit according to ETH DropTCPIPChecksumErrorFrame value */
+ /* Set the RSF bit according to ETH ReceiveStoreForward value */
+ /* Set the DFF bit according to ETH FlushReceivedFrame value */
+ /* Set the TSF bit according to ETH TransmitStoreForward value */
+ /* Set the TTC bit according to ETH TransmitThresholdControl value */
+ /* Set the FEF bit according to ETH ForwardErrorFrames value */
+ /* Set the FUF bit according to ETH ForwardUndersizedGoodFrames value */
+ /* Set the RTC bit according to ETH ReceiveThresholdControl value */
+ /* Set the OSF bit according to ETH SecondFrameOperate value */
+ tmpreg |= (uint32_t)(dmainit.DropTCPIPChecksumErrorFrame |
+ dmainit.ReceiveStoreForward |
+ dmainit.FlushReceivedFrame |
+ dmainit.TransmitStoreForward |
+ dmainit.TransmitThresholdControl |
+ dmainit.ForwardErrorFrames |
+ dmainit.ForwardUndersizedGoodFrames |
+ dmainit.ReceiveThresholdControl |
+ dmainit.SecondFrameOperate);
+
+ /* Write to ETHERNET DMAOMR */
+ (heth->Instance)->DMAOMR = (uint32_t)tmpreg;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->DMAOMR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->DMAOMR = tmpreg;
+
+ /*----------------------- ETHERNET DMABMR Configuration ------------------*/
+ /* Set the AAL bit according to ETH AddressAlignedBeats value */
+ /* Set the FB bit according to ETH FixedBurst value */
+ /* Set the RPBL and 4*PBL bits according to ETH RxDMABurstLength value */
+ /* Set the PBL and 4*PBL bits according to ETH TxDMABurstLength value */
+ /* Set the Enhanced DMA descriptors bit according to ETH EnhancedDescriptorFormat value*/
+ /* Set the DSL bit according to ETH DesciptorSkipLength value */
+ /* Set the PR and DA bits according to ETH DMAArbitration value */
+ (heth->Instance)->DMABMR = (uint32_t)(dmainit.AddressAlignedBeats |
+ dmainit.FixedBurst |
+ dmainit.RxDMABurstLength | /* !! if 4xPBL is selected for Tx or Rx it is applied for the other */
+ dmainit.TxDMABurstLength |
+ dmainit.EnhancedDescriptorFormat |
+ (dmainit.DescriptorSkipLength << 2) |
+ dmainit.DMAArbitration |
+ ETH_DMABMR_USP); /* Enable use of separate PBL for Rx and Tx */
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->DMABMR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->DMABMR = tmpreg;
+
+ if((heth->Init).RxMode == ETH_RXINTERRUPT_MODE)
+ {
+ /* Enable the Ethernet Rx Interrupt */
+ __HAL_ETH_DMA_ENABLE_IT((heth), ETH_DMA_IT_NIS | ETH_DMA_IT_R);
+ }
+
+ /* Initialize MAC address in ethernet MAC */
+ ETH_MACAddressConfig(heth, ETH_MAC_ADDRESS0, heth->Init.MACAddr);
+}
+
+/**
+ * @brief Configures the selected MAC address.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @param MacAddr The MAC address to configure
+ * This parameter can be one of the following values:
+ * @arg ETH_MAC_Address0: MAC Address0
+ * @arg ETH_MAC_Address1: MAC Address1
+ * @arg ETH_MAC_Address2: MAC Address2
+ * @arg ETH_MAC_Address3: MAC Address3
+ * @param Addr Pointer to MAC address buffer data (6 bytes)
+ * @retval HAL status
+ */
+static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr)
+{
+ uint32_t tmpreg;
+
+ /* Check the parameters */
+ assert_param(IS_ETH_MAC_ADDRESS0123(MacAddr));
+
+ /* Calculate the selected MAC address high register */
+ tmpreg = ((uint32_t)Addr[5] << 8) | (uint32_t)Addr[4];
+ /* Load the selected MAC address high register */
+ (*(__IO uint32_t *)((uint32_t)(ETH_MAC_ADDR_HBASE + MacAddr))) = tmpreg;
+ /* Calculate the selected MAC address low register */
+ tmpreg = ((uint32_t)Addr[3] << 24) | ((uint32_t)Addr[2] << 16) | ((uint32_t)Addr[1] << 8) | Addr[0];
+
+ /* Load the selected MAC address low register */
+ (*(__IO uint32_t *)((uint32_t)(ETH_MAC_ADDR_LBASE + MacAddr))) = tmpreg;
+}
+
+/**
+ * @brief Enables the MAC transmission.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_MACTransmissionEnable(ETH_HandleTypeDef *heth)
+{
+ __IO uint32_t tmpreg = 0;
+
+ /* Enable the MAC transmission */
+ (heth->Instance)->MACCR |= ETH_MACCR_TE;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg;
+}
+
+/**
+ * @brief Disables the MAC transmission.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_MACTransmissionDisable(ETH_HandleTypeDef *heth)
+{
+ __IO uint32_t tmpreg = 0;
+
+ /* Disable the MAC transmission */
+ (heth->Instance)->MACCR &= ~ETH_MACCR_TE;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg;
+}
+
+/**
+ * @brief Enables the MAC reception.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_MACReceptionEnable(ETH_HandleTypeDef *heth)
+{
+ __IO uint32_t tmpreg = 0;
+
+ /* Enable the MAC reception */
+ (heth->Instance)->MACCR |= ETH_MACCR_RE;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg;
+}
+
+/**
+ * @brief Disables the MAC reception.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_MACReceptionDisable(ETH_HandleTypeDef *heth)
+{
+ __IO uint32_t tmpreg = 0;
+
+ /* Disable the MAC reception */
+ (heth->Instance)->MACCR &= ~ETH_MACCR_RE;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->MACCR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->MACCR = tmpreg;
+}
+
+/**
+ * @brief Enables the DMA transmission.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_DMATransmissionEnable(ETH_HandleTypeDef *heth)
+{
+ /* Enable the DMA transmission */
+ (heth->Instance)->DMAOMR |= ETH_DMAOMR_ST;
+}
+
+/**
+ * @brief Disables the DMA transmission.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_DMATransmissionDisable(ETH_HandleTypeDef *heth)
+{
+ /* Disable the DMA transmission */
+ (heth->Instance)->DMAOMR &= ~ETH_DMAOMR_ST;
+}
+
+/**
+ * @brief Enables the DMA reception.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_DMAReceptionEnable(ETH_HandleTypeDef *heth)
+{
+ /* Enable the DMA reception */
+ (heth->Instance)->DMAOMR |= ETH_DMAOMR_SR;
+}
+
+/**
+ * @brief Disables the DMA reception.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_DMAReceptionDisable(ETH_HandleTypeDef *heth)
+{
+ /* Disable the DMA reception */
+ (heth->Instance)->DMAOMR &= ~ETH_DMAOMR_SR;
+}
+
+/**
+ * @brief Clears the ETHERNET transmit FIFO.
+ * @param heth pointer to a ETH_HandleTypeDef structure that contains
+ * the configuration information for ETHERNET module
+ * @retval None
+ */
+static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth)
+{
+ __IO uint32_t tmpreg = 0;
+
+ /* Set the Flush Transmit FIFO bit */
+ (heth->Instance)->DMAOMR |= ETH_DMAOMR_FTF;
+
+ /* Wait until the write operation will be taken into account:
+ at least four TX_CLK/RX_CLK clock cycles */
+ tmpreg = (heth->Instance)->DMAOMR;
+ HAL_Delay(ETH_REG_WRITE_DELAY);
+ (heth->Instance)->DMAOMR = tmpreg;
+}
+
+/**
+ * @}
+ */
+
+#endif /* ETH */
+#endif /* HAL_ETH_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c
new file mode 100644
index 00000000..556f0d2a
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c
@@ -0,0 +1,833 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_flash.c
+ * @author MCD Application Team
+ * @brief FLASH HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the internal FLASH memory:
+ * + Program operations functions
+ * + Memory Control functions
+ * + Peripheral Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### FLASH peripheral features #####
+ ==============================================================================
+
+ [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses
+ to the Flash memory. It implements the erase and program Flash memory operations
+ and the read and write protection mechanisms.
+
+ [..] The Flash memory interface accelerates code execution with a system of instruction
+ prefetch and cache lines.
+
+ [..] The FLASH main features are:
+ (+) Flash memory read operations
+ (+) Flash memory program/erase operations
+ (+) Read / write protections
+ (+) Prefetch on I-Code
+ (+) 64 cache lines of 128 bits on I-Code
+ (+) 8 cache lines of 128 bits on D-Code
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver provides functions and macros to configure and program the FLASH
+ memory of all STM32F7xx devices.
+
+ (#) FLASH Memory IO Programming functions:
+ (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and
+ HAL_FLASH_Lock() functions
+ (++) Program functions: byte, half word, word and double word
+ (++) There Two modes of programming :
+ (+++) Polling mode using HAL_FLASH_Program() function
+ (+++) Interrupt mode using HAL_FLASH_Program_IT() function
+
+ (#) Interrupts and flags management functions :
+ (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler()
+ (++) Wait for last FLASH operation according to its status
+ (++) Get error flag status by calling HAL_SetErrorCode()
+ [..]
+ In addition to these functions, this driver includes a set of macros allowing
+ to handle the following operations:
+ (+) Set the latency
+ (+) Enable/Disable the prefetch buffer
+ (+) Enable/Disable the Instruction cache and the Data cache
+ (+) Reset the Instruction cache and the Data cache
+ (+) Enable/Disable the FLASH interrupts
+ (+) Monitor the FLASH flags status
+ [..]
+ (@) For any Flash memory program operation (erase or program), the CPU clock frequency
+ (HCLK) must be at least 1MHz.
+ (@) The contents of the Flash memory are not guaranteed if a device reset occurs during
+ a Flash memory operation.
+ (@) Any attempt to read the Flash memory while it is being written or erased, causes the
+ bus to stall. Read operations are processed correctly once the program operation has
+ completed. This means that code or data fetches cannot be performed while a write/erase
+ operation is ongoing.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup FLASH FLASH
+ * @brief FLASH HAL module driver
+ * @{
+ */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup FLASH_Private_Constants
+ * @{
+ */
+#define SECTOR_MASK ((uint32_t)0xFFFFFF07U)
+#define FLASH_TIMEOUT_VALUE ((uint32_t)50000U)/* 50 s */
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup FLASH_Private_Variables
+ * @{
+ */
+/* Variable used for Erase sectors under interruption */
+FLASH_ProcessTypeDef pFlash;
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup FLASH_Private_Functions
+ * @{
+ */
+/* Program operations */
+static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data);
+static void FLASH_Program_Word(uint32_t Address, uint32_t Data);
+static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data);
+static void FLASH_Program_Byte(uint32_t Address, uint8_t Data);
+static void FLASH_SetErrorCode(void);
+
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Functions FLASH Exported Functions
+ * @{
+ */
+
+/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions
+ * @brief Programming operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Programming operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the FLASH
+ program operations.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Program byte, halfword, word or double word at a specified address
+ * @param TypeProgram Indicate the way to program at a specified address.
+ * This parameter can be a value of @ref FLASH_Type_Program
+ * @param Address specifies the address to be programmed.
+ * @param Data specifies the data to be programmed
+ *
+ * @retval HAL_StatusTypeDef HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ switch(TypeProgram)
+ {
+ case FLASH_TYPEPROGRAM_BYTE :
+ {
+ /*Program byte (8-bit) at a specified address.*/
+ FLASH_Program_Byte(Address, (uint8_t) Data);
+ break;
+ }
+
+ case FLASH_TYPEPROGRAM_HALFWORD :
+ {
+ /*Program halfword (16-bit) at a specified address.*/
+ FLASH_Program_HalfWord(Address, (uint16_t) Data);
+ break;
+ }
+
+ case FLASH_TYPEPROGRAM_WORD :
+ {
+ /*Program word (32-bit) at a specified address.*/
+ FLASH_Program_Word(Address, (uint32_t) Data);
+ break;
+ }
+
+ case FLASH_TYPEPROGRAM_DOUBLEWORD :
+ {
+ /*Program double word (64-bit) at a specified address.*/
+ FLASH_Program_DoubleWord(Address, Data);
+ break;
+ }
+ default :
+ break;
+ }
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* If the program operation is completed, disable the PG Bit */
+ FLASH->CR &= (~FLASH_CR_PG);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+
+ return status;
+}
+
+/**
+ * @brief Program byte, halfword, word or double word at a specified address with interrupt enabled.
+ * @param TypeProgram Indicate the way to program at a specified address.
+ * This parameter can be a value of @ref FLASH_Type_Program
+ * @param Address specifies the address to be programmed.
+ * @param Data specifies the data to be programmed
+ *
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+
+ /* Enable End of FLASH Operation interrupt */
+ __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP);
+
+ /* Enable Error source interrupt */
+ __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR);
+
+ /* Clear pending flags (if any) */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |\
+ FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR| FLASH_FLAG_ERSERR);
+
+ pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM;
+ pFlash.Address = Address;
+
+ switch(TypeProgram)
+ {
+ case FLASH_TYPEPROGRAM_BYTE :
+ {
+ /*Program byte (8-bit) at a specified address.*/
+ FLASH_Program_Byte(Address, (uint8_t) Data);
+ break;
+ }
+
+ case FLASH_TYPEPROGRAM_HALFWORD :
+ {
+ /*Program halfword (16-bit) at a specified address.*/
+ FLASH_Program_HalfWord(Address, (uint16_t) Data);
+ break;
+ }
+
+ case FLASH_TYPEPROGRAM_WORD :
+ {
+ /*Program word (32-bit) at a specified address.*/
+ FLASH_Program_Word(Address, (uint32_t) Data);
+ break;
+ }
+
+ case FLASH_TYPEPROGRAM_DOUBLEWORD :
+ {
+ /*Program double word (64-bit) at a specified address.*/
+ FLASH_Program_DoubleWord(Address, Data);
+ break;
+ }
+ default :
+ break;
+ }
+ return status;
+}
+
+/**
+ * @brief This function handles FLASH interrupt request.
+ * @retval None
+ */
+void HAL_FLASH_IRQHandler(void)
+{
+ uint32_t temp = 0;
+
+ /* If the program operation is completed, disable the PG Bit */
+ FLASH->CR &= (~FLASH_CR_PG);
+
+ /* If the erase operation is completed, disable the SER Bit */
+ FLASH->CR &= (~FLASH_CR_SER);
+ FLASH->CR &= SECTOR_MASK;
+
+ /* if the erase operation is completed, disable the MER Bit */
+ FLASH->CR &= (~FLASH_MER_BIT);
+
+ /* Check FLASH End of Operation flag */
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET)
+ {
+ /* Clear FLASH End of Operation pending bit */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+
+ switch (pFlash.ProcedureOnGoing)
+ {
+ case FLASH_PROC_SECTERASE :
+ {
+ /* Nb of sector to erased can be decreased */
+ pFlash.NbSectorsToErase--;
+
+ /* Check if there are still sectors to erase */
+ if(pFlash.NbSectorsToErase != 0)
+ {
+ temp = pFlash.Sector;
+ /* Indicate user which sector has been erased */
+ HAL_FLASH_EndOfOperationCallback(temp);
+
+ /* Increment sector number */
+ temp = ++pFlash.Sector;
+ FLASH_Erase_Sector(temp, pFlash.VoltageForErase);
+ }
+ else
+ {
+ /* No more sectors to Erase, user callback can be called.*/
+ /* Reset Sector and stop Erase sectors procedure */
+ pFlash.Sector = temp = 0xFFFFFFFFU;
+ /* FLASH EOP interrupt user callback */
+ HAL_FLASH_EndOfOperationCallback(temp);
+ /* Sector Erase procedure is completed */
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ }
+ break;
+ }
+
+ case FLASH_PROC_MASSERASE :
+ {
+ /* MassErase ended. Return the selected bank : in this product we don't have Banks */
+ /* FLASH EOP interrupt user callback */
+ HAL_FLASH_EndOfOperationCallback(0);
+ /* MAss Erase procedure is completed */
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ break;
+ }
+
+ case FLASH_PROC_PROGRAM :
+ {
+ /*Program ended. Return the selected address*/
+ /* FLASH EOP interrupt user callback */
+ HAL_FLASH_EndOfOperationCallback(pFlash.Address);
+ /* Programming procedure is completed */
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ break;
+ }
+ default :
+ break;
+ }
+ }
+
+ /* Check FLASH operation error flags */
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_ALL_ERRORS) != RESET)
+ {
+ switch (pFlash.ProcedureOnGoing)
+ {
+ case FLASH_PROC_SECTERASE :
+ {
+ /* return the faulty sector */
+ temp = pFlash.Sector;
+ pFlash.Sector = 0xFFFFFFFFU;
+ break;
+ }
+ case FLASH_PROC_MASSERASE :
+ {
+ /* No return in case of Mass Erase */
+ temp = 0;
+ break;
+ }
+ case FLASH_PROC_PROGRAM :
+ {
+ /*return the faulty address*/
+ temp = pFlash.Address;
+ break;
+ }
+ default :
+ break;
+ }
+ /*Save the Error code*/
+ FLASH_SetErrorCode();
+
+ /* FLASH error interrupt user callback */
+ HAL_FLASH_OperationErrorCallback(temp);
+
+ /*Stop the procedure ongoing */
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ }
+
+ if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE)
+ {
+ /* Disable End of FLASH Operation interrupt */
+ __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP);
+
+ /* Disable Error source interrupt */
+ __HAL_FLASH_DISABLE_IT(FLASH_IT_ERR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+ }
+
+}
+
+/**
+ * @brief FLASH end of operation interrupt callback
+ * @param ReturnValue The value saved in this parameter depends on the ongoing procedure
+ * - Sectors Erase: Sector which has been erased (if 0xFFFFFFFF, it means that
+ * all the selected sectors have been erased)
+ * - Program : Address which was selected for data program
+ * - Mass Erase : No return value expected
+ * @retval None
+ */
+__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(ReturnValue);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief FLASH operation error interrupt callback
+ * @param ReturnValue The value saved in this parameter depends on the ongoing procedure
+ * - Sectors Erase: Sector which has been erased (if 0xFFFFFFFF, it means that
+ * all the selected sectors have been erased)
+ * - Program : Address which was selected for data program
+ * - Mass Erase : No return value expected
+ * @retval None
+ */
+__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(ReturnValue);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_FLASH_OperationErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions
+ * @brief management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the FLASH
+ memory operations.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Unlock the FLASH control register access
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Unlock(void)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET)
+ {
+ /* Authorize the FLASH Registers access */
+ WRITE_REG(FLASH->KEYR, FLASH_KEY1);
+ WRITE_REG(FLASH->KEYR, FLASH_KEY2);
+
+ /* Verify Flash is unlocked */
+ if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET)
+ {
+ status = HAL_ERROR;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * @brief Locks the FLASH control register access
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Lock(void)
+{
+ /* Set the LOCK Bit to lock the FLASH Registers access */
+ FLASH->CR |= FLASH_CR_LOCK;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Unlock the FLASH Option Control Registers access.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
+{
+ if((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET)
+ {
+ /* Authorizes the Option Byte register programming */
+ FLASH->OPTKEYR = FLASH_OPT_KEY1;
+ FLASH->OPTKEYR = FLASH_OPT_KEY2;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Lock the FLASH Option Control Registers access.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
+{
+ /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */
+ FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Launch the option byte loading.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
+{
+ /* Set the OPTSTRT bit in OPTCR register */
+ FLASH->OPTCR |= FLASH_OPTCR_OPTSTRT;
+
+ /* Wait for last operation to be completed */
+ return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief Peripheral Errors functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time Errors of the FLASH peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Get the specific FLASH error flag.
+ * @retval FLASH_ErrorCode: The returned value can be:
+ * @arg FLASH_ERROR_ERS: FLASH Erasing Sequence error flag
+ * @arg FLASH_ERROR_PGP: FLASH Programming Parallelism error flag
+ * @arg FLASH_ERROR_PGA: FLASH Programming Alignment error flag
+ * @arg FLASH_ERROR_WRP: FLASH Write protected error flag
+ * @arg FLASH_ERROR_OPERATION: FLASH operation Error flag
+ */
+uint32_t HAL_FLASH_GetError(void)
+{
+ return pFlash.ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief Wait for a FLASH operation to complete.
+ * @param Timeout maximum flash operationtimeout
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
+{
+ uint32_t tickstart = 0;
+
+ /* Clear Error Code */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
+ Even if the FLASH operation fails, the BUSY flag will be reset and an error
+ flag will be set */
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET)
+ {
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_ALL_ERRORS) != RESET)
+ {
+ /*Save the error code*/
+ FLASH_SetErrorCode();
+ return HAL_ERROR;
+ }
+
+ /* Check FLASH End of Operation flag */
+ if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET)
+ {
+ /* Clear FLASH End of Operation pending bit */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+ }
+
+ /* If there is an error flag set */
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Program a double word (64-bit) at a specified address.
+ * @note This function must be used when the device voltage range is from
+ * 2.7V to 3.6V and an External Vpp is present.
+ *
+ * @note If an erase and a program operations are requested simultaneously,
+ * the erase operation is performed before the program one.
+ *
+ * @param Address specifies the address to be programmed.
+ * @param Data specifies the data to be programmed.
+ * @retval None
+ */
+static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+ /* If the previous operation is completed, proceed to program the new data */
+ FLASH->CR &= CR_PSIZE_MASK;
+ FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD;
+ FLASH->CR |= FLASH_CR_PG;
+
+ /* Program the double-word */
+ *(__IO uint32_t*)Address = (uint32_t)Data;
+ *(__IO uint32_t*)(Address+4) = (uint32_t)(Data >> 32);
+
+ /* Data synchronous Barrier (DSB) Just after the write operation
+ This will force the CPU to respect the sequence of instruction (no optimization).*/
+ __DSB();
+}
+
+
+/**
+ * @brief Program word (32-bit) at a specified address.
+ * @note This function must be used when the device voltage range is from
+ * 2.7V to 3.6V.
+ *
+ * @note If an erase and a program operations are requested simultaneously,
+ * the erase operation is performed before the program one.
+ *
+ * @param Address specifies the address to be programmed.
+ * @param Data specifies the data to be programmed.
+ * @retval None
+ */
+static void FLASH_Program_Word(uint32_t Address, uint32_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+ /* If the previous operation is completed, proceed to program the new data */
+ FLASH->CR &= CR_PSIZE_MASK;
+ FLASH->CR |= FLASH_PSIZE_WORD;
+ FLASH->CR |= FLASH_CR_PG;
+
+ *(__IO uint32_t*)Address = Data;
+
+ /* Data synchronous Barrier (DSB) Just after the write operation
+ This will force the CPU to respect the sequence of instruction (no optimization).*/
+ __DSB();
+}
+
+/**
+ * @brief Program a half-word (16-bit) at a specified address.
+ * @note This function must be used when the device voltage range is from
+ * 2.7V to 3.6V.
+ *
+ * @note If an erase and a program operations are requested simultaneously,
+ * the erase operation is performed before the program one.
+ *
+ * @param Address specifies the address to be programmed.
+ * @param Data specifies the data to be programmed.
+ * @retval None
+ */
+static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+ /* If the previous operation is completed, proceed to program the new data */
+ FLASH->CR &= CR_PSIZE_MASK;
+ FLASH->CR |= FLASH_PSIZE_HALF_WORD;
+ FLASH->CR |= FLASH_CR_PG;
+
+ *(__IO uint16_t*)Address = Data;
+
+ /* Data synchronous Barrier (DSB) Just after the write operation
+ This will force the CPU to respect the sequence of instruction (no optimization).*/
+ __DSB();
+
+}
+
+/**
+ * @brief Program byte (8-bit) at a specified address.
+ * @note This function must be used when the device voltage range is from
+ * 2.7V to 3.6V.
+ *
+ * @note If an erase and a program operations are requested simultaneously,
+ * the erase operation is performed before the program one.
+ *
+ * @param Address specifies the address to be programmed.
+ * @param Data specifies the data to be programmed.
+ * @retval None
+ */
+static void FLASH_Program_Byte(uint32_t Address, uint8_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+ /* If the previous operation is completed, proceed to program the new data */
+ FLASH->CR &= CR_PSIZE_MASK;
+ FLASH->CR |= FLASH_PSIZE_BYTE;
+ FLASH->CR |= FLASH_CR_PG;
+
+ *(__IO uint8_t*)Address = Data;
+
+ /* Data synchronous Barrier (DSB) Just after the write operation
+ This will force the CPU to respect the sequence of instruction (no optimization).*/
+ __DSB();
+}
+
+/**
+ * @brief Set the specific FLASH error flag.
+ * @retval None
+ */
+static void FLASH_SetErrorCode(void)
+{
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR) != RESET)
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_OPERATION;
+ }
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET)
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP;
+ }
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET)
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA;
+ }
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR) != RESET)
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_PGP;
+ }
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_ERSERR) != RESET)
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_ERS;
+ }
+
+#if defined (FLASH_OPTCR2_PCROP)
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) != RESET)
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_RD;
+ }
+#endif /* FLASH_OPTCR2_PCROP */
+
+ /* Clear error programming flags */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_ALL_ERRORS);
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c
new file mode 100644
index 00000000..c4d66b06
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c
@@ -0,0 +1,1138 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_flash_ex.c
+ * @author MCD Application Team
+ * @brief Extended FLASH HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the FLASH extension peripheral:
+ * + Extended programming operations functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### Flash Extension features #####
+ ==============================================================================
+
+ [..] Comparing to other previous devices, the FLASH interface for STM32F76xx/STM32F77xx
+ devices contains the following additional features
+
+ (+) Capacity up to 2 Mbyte with dual bank architecture supporting read-while-write
+ capability (RWW)
+ (+) Dual bank memory organization
+ (+) Dual boot mode
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..] This driver provides functions to configure and program the FLASH memory
+ of all STM32F7xx devices. It includes
+ (#) FLASH Memory Erase functions:
+ (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and
+ HAL_FLASH_Lock() functions
+ (++) Erase function: Erase sector, erase all sectors
+ (++) There are two modes of erase :
+ (+++) Polling Mode using HAL_FLASHEx_Erase()
+ (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT()
+
+ (#) Option Bytes Programming functions: Use HAL_FLASHEx_OBProgram() to :
+ (++) Set/Reset the write protection
+ (++) Set the Read protection Level
+ (++) Set the BOR level
+ (++) Program the user Option Bytes
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup FLASHEx FLASHEx
+ * @brief FLASH HAL Extension module driver
+ * @{
+ */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup FLASHEx_Private_Constants
+ * @{
+ */
+#define SECTOR_MASK 0xFFFFFF07U
+#define FLASH_TIMEOUT_VALUE 50000U/* 50 s */
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup FLASHEx_Private_Variables
+ * @{
+ */
+extern FLASH_ProcessTypeDef pFlash;
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup FLASHEx_Private_Functions
+ * @{
+ */
+/* Option bytes control */
+static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector);
+static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector);
+static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level);
+static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level);
+static HAL_StatusTypeDef FLASH_OB_BootAddressConfig(uint32_t BootOption, uint32_t Address);
+static uint32_t FLASH_OB_GetUser(void);
+static uint32_t FLASH_OB_GetWRP(void);
+static uint8_t FLASH_OB_GetRDP(void);
+static uint32_t FLASH_OB_GetBOR(void);
+static uint32_t FLASH_OB_GetBootAddress(uint32_t BootOption);
+
+#if defined (FLASH_OPTCR_nDBANK)
+static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks);
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint32_t Wwdg, uint32_t Iwdg, uint32_t Stop, uint32_t Stdby, uint32_t Iwdgstop, \
+ uint32_t Iwdgstdby, uint32_t NDBank, uint32_t NDBoot);
+#else
+static void FLASH_MassErase(uint8_t VoltageRange);
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint32_t Wwdg, uint32_t Iwdg, uint32_t Stop, uint32_t Stdby, uint32_t Iwdgstop, uint32_t Iwdgstdby);
+#endif /* FLASH_OPTCR_nDBANK */
+
+#if defined (FLASH_OPTCR2_PCROP)
+static HAL_StatusTypeDef FLASH_OB_PCROP_Config(uint32_t PCROPSector);
+static HAL_StatusTypeDef FLASH_OB_PCROP_RDP_Config(uint32_t Pcrop_Rdp);
+static uint32_t FLASH_OB_GetPCROP(void);
+static uint32_t FLASH_OB_GetPCROPRDP(void);
+#endif /* FLASH_OPTCR2_PCROP */
+
+extern HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions
+ * @{
+ */
+
+/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions
+ * @brief Extended IO operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended programming operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the Extension FLASH
+ programming operations Operations.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Perform a mass erase or erase the specified FLASH memory sectors
+ * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
+ * contains the configuration information for the erasing.
+ *
+ * @param[out] SectorError pointer to variable that
+ * contains the configuration information on faulty sector in case of error
+ * (0xFFFFFFFF means that all the sectors have been correctly erased)
+ *
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+ uint32_t index = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /*Initialization of SectorError variable*/
+ *SectorError = 0xFFFFFFFFU;
+
+ if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
+ {
+ /*Mass erase to be done*/
+#if defined (FLASH_OPTCR_nDBANK)
+ FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks);
+#else
+ FLASH_MassErase((uint8_t) pEraseInit->VoltageRange);
+#endif /* FLASH_OPTCR_nDBANK */
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* if the erase operation is completed, disable the MER Bit */
+ FLASH->CR &= (~FLASH_MER_BIT);
+ }
+ else
+ {
+ /* Check the parameters */
+ assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector));
+
+ /* Erase by sector by sector to be done*/
+ for(index = pEraseInit->Sector; index < (pEraseInit->NbSectors + pEraseInit->Sector); index++)
+ {
+ FLASH_Erase_Sector(index, (uint8_t) pEraseInit->VoltageRange);
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* If the erase operation is completed, disable the SER Bit and SNB Bits */
+ CLEAR_BIT(FLASH->CR, (FLASH_CR_SER | FLASH_CR_SNB));
+
+ if(status != HAL_OK)
+ {
+ /* In case of error, stop erase procedure and return the faulty sector*/
+ *SectorError = index;
+ break;
+ }
+ }
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+
+ return status;
+}
+
+/**
+ * @brief Perform a mass erase or erase the specified FLASH memory sectors with interrupt enabled
+ * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
+ * contains the configuration information for the erasing.
+ *
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
+
+ /* Enable End of FLASH Operation interrupt */
+ __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP);
+
+ /* Enable Error source interrupt */
+ __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR);
+
+ /* Clear pending flags (if any) */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |\
+ FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR| FLASH_FLAG_ERSERR);
+
+ if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
+ {
+ /*Mass erase to be done*/
+ pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE;
+#if defined (FLASH_OPTCR_nDBANK)
+ FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks);
+#else
+ FLASH_MassErase((uint8_t) pEraseInit->VoltageRange);
+#endif /* FLASH_OPTCR_nDBANK */
+ }
+ else
+ {
+ /* Erase by sector to be done*/
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector));
+
+ pFlash.ProcedureOnGoing = FLASH_PROC_SECTERASE;
+ pFlash.NbSectorsToErase = pEraseInit->NbSectors;
+ pFlash.Sector = pEraseInit->Sector;
+ pFlash.VoltageForErase = (uint8_t)pEraseInit->VoltageRange;
+
+ /*Erase 1st sector and wait for IT*/
+ FLASH_Erase_Sector(pEraseInit->Sector, pEraseInit->VoltageRange);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Program option bytes
+ * @param pOBInit pointer to an FLASH_OBInitStruct structure that
+ * contains the configuration information for the programming.
+ *
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_OPTIONBYTE(pOBInit->OptionType));
+
+ /* Write protection configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP)
+ {
+ assert_param(IS_WRPSTATE(pOBInit->WRPState));
+ if(pOBInit->WRPState == OB_WRPSTATE_ENABLE)
+ {
+ /*Enable of Write protection on the selected Sector*/
+ status = FLASH_OB_EnableWRP(pOBInit->WRPSector);
+ }
+ else
+ {
+ /*Disable of Write protection on the selected Sector*/
+ status = FLASH_OB_DisableWRP(pOBInit->WRPSector);
+ }
+ }
+
+ /* Read protection configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP)
+ {
+ status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel);
+ }
+
+ /* USER configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER)
+ {
+#if defined (FLASH_OPTCR_nDBANK)
+ status = FLASH_OB_UserConfig(pOBInit->USERConfig & OB_WWDG_SW,
+ pOBInit->USERConfig & OB_IWDG_SW,
+ pOBInit->USERConfig & OB_STOP_NO_RST,
+ pOBInit->USERConfig & OB_STDBY_NO_RST,
+ pOBInit->USERConfig & OB_IWDG_STOP_ACTIVE,
+ pOBInit->USERConfig & OB_IWDG_STDBY_ACTIVE,
+ pOBInit->USERConfig & OB_NDBANK_SINGLE_BANK,
+ pOBInit->USERConfig & OB_DUAL_BOOT_DISABLE);
+#else
+ status = FLASH_OB_UserConfig(pOBInit->USERConfig & OB_WWDG_SW,
+ pOBInit->USERConfig & OB_IWDG_SW,
+ pOBInit->USERConfig & OB_STOP_NO_RST,
+ pOBInit->USERConfig & OB_STDBY_NO_RST,
+ pOBInit->USERConfig & OB_IWDG_STOP_ACTIVE,
+ pOBInit->USERConfig & OB_IWDG_STDBY_ACTIVE);
+#endif /* FLASH_OPTCR_nDBANK */
+ }
+
+ /* BOR Level configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_BOR) == OPTIONBYTE_BOR)
+ {
+ status = FLASH_OB_BOR_LevelConfig(pOBInit->BORLevel);
+ }
+
+ /* Boot 0 Address configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_BOOTADDR_0) == OPTIONBYTE_BOOTADDR_0)
+ {
+ status = FLASH_OB_BootAddressConfig(OPTIONBYTE_BOOTADDR_0, pOBInit->BootAddr0);
+ }
+
+ /* Boot 1 Address configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_BOOTADDR_1) == OPTIONBYTE_BOOTADDR_1)
+ {
+ status = FLASH_OB_BootAddressConfig(OPTIONBYTE_BOOTADDR_1, pOBInit->BootAddr1);
+ }
+
+#if defined (FLASH_OPTCR2_PCROP)
+ /* PCROP configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_PCROP) == OPTIONBYTE_PCROP)
+ {
+ status = FLASH_OB_PCROP_Config(pOBInit->PCROPSector);
+ }
+
+ /* PCROP_RDP configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_PCROP_RDP) == OPTIONBYTE_PCROP_RDP)
+ {
+ status = FLASH_OB_PCROP_RDP_Config(pOBInit->PCROPRdp);
+ }
+#endif /* FLASH_OPTCR2_PCROP */
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+
+ return status;
+}
+
+/**
+ * @brief Get the Option byte configuration
+ * @param pOBInit pointer to an FLASH_OBInitStruct structure that
+ * contains the configuration information for the programming.
+ *
+ * @retval None
+ */
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit)
+{
+ pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\
+ OPTIONBYTE_BOR | OPTIONBYTE_BOOTADDR_0 | OPTIONBYTE_BOOTADDR_1;
+
+ /*Get WRP*/
+ pOBInit->WRPSector = FLASH_OB_GetWRP();
+
+ /*Get RDP Level*/
+ pOBInit->RDPLevel = FLASH_OB_GetRDP();
+
+ /*Get USER*/
+ pOBInit->USERConfig = FLASH_OB_GetUser();
+
+ /*Get BOR Level*/
+ pOBInit->BORLevel = FLASH_OB_GetBOR();
+
+ /*Get Boot Address when Boot pin = 0 */
+ pOBInit->BootAddr0 = FLASH_OB_GetBootAddress(OPTIONBYTE_BOOTADDR_0);
+
+ /*Get Boot Address when Boot pin = 1 */
+ pOBInit->BootAddr1 = FLASH_OB_GetBootAddress(OPTIONBYTE_BOOTADDR_1);
+
+#if defined (FLASH_OPTCR2_PCROP)
+ /*Get PCROP Sectors */
+ pOBInit->PCROPSector = FLASH_OB_GetPCROP();
+
+ /*Get PCROP_RDP Value */
+ pOBInit->PCROPRdp = FLASH_OB_GetPCROPRDP();
+#endif /* FLASH_OPTCR2_PCROP */
+}
+/**
+ * @}
+ */
+
+#if defined (FLASH_OPTCR_nDBANK)
+/**
+ * @brief Full erase of FLASH memory sectors
+ * @param VoltageRange The device voltage range which defines the erase parallelism.
+ * This parameter can be one of the following values:
+ * @arg VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
+ * the operation will be done by byte (8-bit)
+ * @arg VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
+ * the operation will be done by half word (16-bit)
+ * @arg VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
+ * the operation will be done by word (32-bit)
+ * @arg VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
+ * the operation will be done by double word (64-bit)
+ * @param Banks Banks to be erased
+ * This parameter can be one of the following values:
+ * @arg FLASH_BANK_1: Bank1 to be erased
+ * @arg FLASH_BANK_2: Bank2 to be erased
+ * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased
+ *
+ * @retval HAL Status
+ */
+static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks)
+{
+ /* Check the parameters */
+ assert_param(IS_VOLTAGERANGE(VoltageRange));
+ assert_param(IS_FLASH_BANK(Banks));
+
+ /* if the previous operation is completed, proceed to erase all sectors */
+ FLASH->CR &= CR_PSIZE_MASK;
+ if(Banks == FLASH_BANK_BOTH)
+ {
+ /* bank1 & bank2 will be erased*/
+ FLASH->CR |= FLASH_MER_BIT;
+ }
+ else if(Banks == FLASH_BANK_2)
+ {
+ /*Only bank2 will be erased*/
+ FLASH->CR |= FLASH_CR_MER2;
+ }
+ else
+ {
+ /*Only bank1 will be erased*/
+ FLASH->CR |= FLASH_CR_MER1;
+ }
+ FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange <<8);
+ /* Data synchronous Barrier (DSB) Just after the write operation
+ This will force the CPU to respect the sequence of instruction (no optimization).*/
+ __DSB();
+}
+
+/**
+ * @brief Erase the specified FLASH memory sector
+ * @param Sector FLASH sector to erase
+ * The value of this parameter depend on device used within the same series
+ * @param VoltageRange The device voltage range which defines the erase parallelism.
+ * This parameter can be one of the following values:
+ * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
+ * the operation will be done by byte (8-bit)
+ * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
+ * the operation will be done by half word (16-bit)
+ * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
+ * the operation will be done by word (32-bit)
+ * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
+ * the operation will be done by double word (64-bit)
+ *
+ * @retval None
+ */
+void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange)
+{
+ uint32_t tmp_psize = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_SECTOR(Sector));
+ assert_param(IS_VOLTAGERANGE(VoltageRange));
+
+ if(VoltageRange == FLASH_VOLTAGE_RANGE_1)
+ {
+ tmp_psize = FLASH_PSIZE_BYTE;
+ }
+ else if(VoltageRange == FLASH_VOLTAGE_RANGE_2)
+ {
+ tmp_psize = FLASH_PSIZE_HALF_WORD;
+ }
+ else if(VoltageRange == FLASH_VOLTAGE_RANGE_3)
+ {
+ tmp_psize = FLASH_PSIZE_WORD;
+ }
+ else
+ {
+ tmp_psize = FLASH_PSIZE_DOUBLE_WORD;
+ }
+
+ /* Need to add offset of 4 when sector higher than FLASH_SECTOR_11 */
+ if(Sector > FLASH_SECTOR_11)
+ {
+ Sector += 4;
+ }
+
+ /* If the previous operation is completed, proceed to erase the sector */
+ FLASH->CR &= CR_PSIZE_MASK;
+ FLASH->CR |= tmp_psize;
+ CLEAR_BIT(FLASH->CR, FLASH_CR_SNB);
+ FLASH->CR |= FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos);
+ FLASH->CR |= FLASH_CR_STRT;
+
+ /* Data synchronous Barrier (DSB) Just after the write operation
+ This will force the CPU to respect the sequence of instruction (no optimization).*/
+ __DSB();
+}
+
+/**
+ * @brief Return the FLASH Write Protection Option Bytes value.
+ * @retval uint32_t FLASH Write Protection Option Bytes value
+ */
+static uint32_t FLASH_OB_GetWRP(void)
+{
+ /* Return the FLASH write protection Register value */
+ return ((uint32_t)(FLASH->OPTCR & 0x0FFF0000));
+}
+
+/**
+ * @brief Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.
+ * @param Wwdg Selects the IWDG mode
+ * This parameter can be one of the following values:
+ * @arg OB_WWDG_SW: Software WWDG selected
+ * @arg OB_WWDG_HW: Hardware WWDG selected
+ * @param Iwdg Selects the WWDG mode
+ * This parameter can be one of the following values:
+ * @arg OB_IWDG_SW: Software IWDG selected
+ * @arg OB_IWDG_HW: Hardware IWDG selected
+ * @param Stop Reset event when entering STOP mode.
+ * This parameter can be one of the following values:
+ * @arg OB_STOP_NO_RST: No reset generated when entering in STOP
+ * @arg OB_STOP_RST: Reset generated when entering in STOP
+ * @param Stdby Reset event when entering Standby mode.
+ * This parameter can be one of the following values:
+ * @arg OB_STDBY_NO_RST: No reset generated when entering in STANDBY
+ * @arg OB_STDBY_RST: Reset generated when entering in STANDBY
+ * @param Iwdgstop Independent watchdog counter freeze in Stop mode.
+ * This parameter can be one of the following values:
+ * @arg OB_IWDG_STOP_FREEZE: Freeze IWDG counter in STOP
+ * @arg OB_IWDG_STOP_ACTIVE: IWDG counter active in STOP
+ * @param Iwdgstdby Independent watchdog counter freeze in standby mode.
+ * This parameter can be one of the following values:
+ * @arg OB_IWDG_STDBY_FREEZE: Freeze IWDG counter in STANDBY
+ * @arg OB_IWDG_STDBY_ACTIVE: IWDG counter active in STANDBY
+ * @param NDBank Flash Single Bank mode enabled.
+ * This parameter can be one of the following values:
+ * @arg OB_NDBANK_SINGLE_BANK: enable 256 bits mode (Flash is a single bank)
+ * @arg OB_NDBANK_DUAL_BANK: disable 256 bits mode (Flash is a dual bank in 128 bits mode)
+ * @param NDBoot Flash Dual boot mode disable.
+ * This parameter can be one of the following values:
+ * @arg OB_DUAL_BOOT_DISABLE: Disable Dual Boot
+ * @arg OB_DUAL_BOOT_ENABLE: Enable Dual Boot
+
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint32_t Wwdg, uint32_t Iwdg, uint32_t Stop, uint32_t Stdby, uint32_t Iwdgstop, \
+ uint32_t Iwdgstdby, uint32_t NDBank, uint32_t NDBoot)
+{
+ uint32_t useroptionmask = 0x00;
+ uint32_t useroptionvalue = 0x00;
+
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_WWDG_SOURCE(Wwdg));
+ assert_param(IS_OB_IWDG_SOURCE(Iwdg));
+ assert_param(IS_OB_STOP_SOURCE(Stop));
+ assert_param(IS_OB_STDBY_SOURCE(Stdby));
+ assert_param(IS_OB_IWDG_STOP_FREEZE(Iwdgstop));
+ assert_param(IS_OB_IWDG_STDBY_FREEZE(Iwdgstdby));
+ assert_param(IS_OB_NDBANK(NDBank));
+ assert_param(IS_OB_NDBOOT(NDBoot));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ useroptionmask = (FLASH_OPTCR_WWDG_SW | FLASH_OPTCR_IWDG_SW | FLASH_OPTCR_nRST_STOP | \
+ FLASH_OPTCR_nRST_STDBY | FLASH_OPTCR_IWDG_STOP | FLASH_OPTCR_IWDG_STDBY | \
+ FLASH_OPTCR_nDBOOT | FLASH_OPTCR_nDBANK);
+
+ useroptionvalue = (Iwdg | Wwdg | Stop | Stdby | Iwdgstop | Iwdgstdby | NDBoot | NDBank);
+
+ /* Update User Option Byte */
+ MODIFY_REG(FLASH->OPTCR, useroptionmask, useroptionvalue);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Return the FLASH User Option Byte value.
+ * @retval uint32_t FLASH User Option Bytes values: WWDG_SW(Bit4), IWDG_SW(Bit5), nRST_STOP(Bit6),
+ * nRST_STDBY(Bit7), nDBOOT(Bit28), nDBANK(Bit29), IWDG_STDBY(Bit30) and IWDG_STOP(Bit31).
+ */
+static uint32_t FLASH_OB_GetUser(void)
+{
+ /* Return the User Option Byte */
+ return ((uint32_t)(FLASH->OPTCR & 0xF00000F0U));
+}
+#else
+
+/**
+ * @brief Full erase of FLASH memory sectors
+ * @param VoltageRange The device voltage range which defines the erase parallelism.
+ * This parameter can be one of the following values:
+ * @arg VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
+ * the operation will be done by byte (8-bit)
+ * @arg VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
+ * the operation will be done by half word (16-bit)
+ * @arg VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
+ * the operation will be done by word (32-bit)
+ * @arg VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
+ * the operation will be done by double word (64-bit)
+ *
+ * @retval HAL Status
+ */
+static void FLASH_MassErase(uint8_t VoltageRange)
+{
+ /* Check the parameters */
+ assert_param(IS_VOLTAGERANGE(VoltageRange));
+
+ /* if the previous operation is completed, proceed to erase all sectors */
+ FLASH->CR &= CR_PSIZE_MASK;
+ FLASH->CR |= FLASH_CR_MER;
+ FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange <<8);
+ /* Data synchronous Barrier (DSB) Just after the write operation
+ This will force the CPU to respect the sequence of instruction (no optimization).*/
+ __DSB();
+}
+
+/**
+ * @brief Erase the specified FLASH memory sector
+ * @param Sector FLASH sector to erase
+ * The value of this parameter depend on device used within the same series
+ * @param VoltageRange The device voltage range which defines the erase parallelism.
+ * This parameter can be one of the following values:
+ * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
+ * the operation will be done by byte (8-bit)
+ * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
+ * the operation will be done by half word (16-bit)
+ * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
+ * the operation will be done by word (32-bit)
+ * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
+ * the operation will be done by double word (64-bit)
+ *
+ * @retval None
+ */
+void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange)
+{
+ uint32_t tmp_psize = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_SECTOR(Sector));
+ assert_param(IS_VOLTAGERANGE(VoltageRange));
+
+ if(VoltageRange == FLASH_VOLTAGE_RANGE_1)
+ {
+ tmp_psize = FLASH_PSIZE_BYTE;
+ }
+ else if(VoltageRange == FLASH_VOLTAGE_RANGE_2)
+ {
+ tmp_psize = FLASH_PSIZE_HALF_WORD;
+ }
+ else if(VoltageRange == FLASH_VOLTAGE_RANGE_3)
+ {
+ tmp_psize = FLASH_PSIZE_WORD;
+ }
+ else
+ {
+ tmp_psize = FLASH_PSIZE_DOUBLE_WORD;
+ }
+
+ /* If the previous operation is completed, proceed to erase the sector */
+ FLASH->CR &= CR_PSIZE_MASK;
+ FLASH->CR |= tmp_psize;
+ FLASH->CR &= SECTOR_MASK;
+ FLASH->CR |= FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos);
+ FLASH->CR |= FLASH_CR_STRT;
+
+ /* Data synchronous Barrier (DSB) Just after the write operation
+ This will force the CPU to respect the sequence of instruction (no optimization).*/
+ __DSB();
+}
+
+/**
+ * @brief Return the FLASH Write Protection Option Bytes value.
+ * @retval uint32_t FLASH Write Protection Option Bytes value
+ */
+static uint32_t FLASH_OB_GetWRP(void)
+{
+ /* Return the FLASH write protection Register value */
+ return ((uint32_t)(FLASH->OPTCR & 0x00FF0000));
+}
+
+/**
+ * @brief Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.
+ * @param Wwdg Selects the IWDG mode
+ * This parameter can be one of the following values:
+ * @arg OB_WWDG_SW: Software WWDG selected
+ * @arg OB_WWDG_HW: Hardware WWDG selected
+ * @param Iwdg Selects the WWDG mode
+ * This parameter can be one of the following values:
+ * @arg OB_IWDG_SW: Software IWDG selected
+ * @arg OB_IWDG_HW: Hardware IWDG selected
+ * @param Stop Reset event when entering STOP mode.
+ * This parameter can be one of the following values:
+ * @arg OB_STOP_NO_RST: No reset generated when entering in STOP
+ * @arg OB_STOP_RST: Reset generated when entering in STOP
+ * @param Stdby Reset event when entering Standby mode.
+ * This parameter can be one of the following values:
+ * @arg OB_STDBY_NO_RST: No reset generated when entering in STANDBY
+ * @arg OB_STDBY_RST: Reset generated when entering in STANDBY
+ * @param Iwdgstop Independent watchdog counter freeze in Stop mode.
+ * This parameter can be one of the following values:
+ * @arg OB_IWDG_STOP_FREEZE: Freeze IWDG counter in STOP
+ * @arg OB_IWDG_STOP_ACTIVE: IWDG counter active in STOP
+ * @param Iwdgstdby Independent watchdog counter freeze in standby mode.
+ * This parameter can be one of the following values:
+ * @arg OB_IWDG_STDBY_FREEZE: Freeze IWDG counter in STANDBY
+ * @arg OB_IWDG_STDBY_ACTIVE: IWDG counter active in STANDBY
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint32_t Wwdg, uint32_t Iwdg, uint32_t Stop, uint32_t Stdby, uint32_t Iwdgstop, uint32_t Iwdgstdby)
+{
+ uint32_t useroptionmask = 0x00;
+ uint32_t useroptionvalue = 0x00;
+
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_WWDG_SOURCE(Wwdg));
+ assert_param(IS_OB_IWDG_SOURCE(Iwdg));
+ assert_param(IS_OB_STOP_SOURCE(Stop));
+ assert_param(IS_OB_STDBY_SOURCE(Stdby));
+ assert_param(IS_OB_IWDG_STOP_FREEZE(Iwdgstop));
+ assert_param(IS_OB_IWDG_STDBY_FREEZE(Iwdgstdby));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ useroptionmask = (FLASH_OPTCR_WWDG_SW | FLASH_OPTCR_IWDG_SW | FLASH_OPTCR_nRST_STOP | \
+ FLASH_OPTCR_nRST_STDBY | FLASH_OPTCR_IWDG_STOP | FLASH_OPTCR_IWDG_STDBY);
+
+ useroptionvalue = (Iwdg | Wwdg | Stop | Stdby | Iwdgstop | Iwdgstdby);
+
+ /* Update User Option Byte */
+ MODIFY_REG(FLASH->OPTCR, useroptionmask, useroptionvalue);
+ }
+
+ return status;
+
+}
+
+/**
+ * @brief Return the FLASH User Option Byte value.
+ * @retval uint32_t FLASH User Option Bytes values: WWDG_SW(Bit4), IWDG_SW(Bit5), nRST_STOP(Bit6),
+ * nRST_STDBY(Bit7), IWDG_STDBY(Bit30) and IWDG_STOP(Bit31).
+ */
+static uint32_t FLASH_OB_GetUser(void)
+{
+ /* Return the User Option Byte */
+ return ((uint32_t)(FLASH->OPTCR & 0xC00000F0U));
+}
+#endif /* FLASH_OPTCR_nDBANK */
+
+/**
+ * @brief Enable the write protection of the desired bank1 or bank2 sectors
+ *
+ * @note When the memory read protection level is selected (RDP level = 1),
+ * it is not possible to program or erase the flash sector i if CortexM7
+ * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
+ *
+ * @param WRPSector specifies the sector(s) to be write protected.
+ * This parameter can be one of the following values:
+ * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_7 (for STM32F74xxx/STM32F75xxx devices)
+ * or a value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_11 (in Single Bank mode for STM32F76xxx/STM32F77xxx devices)
+ * or a value between OB_WRP_DB_SECTOR_0 and OB_WRP_DB_SECTOR_23 (in Dual Bank mode for STM32F76xxx/STM32F77xxx devices)
+ * @arg OB_WRP_SECTOR_All
+ *
+ * @retval HAL FLASH State
+ */
+static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_WRP_SECTOR(WRPSector));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /*Write protection enabled on sectors */
+ FLASH->OPTCR &= (~WRPSector);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Disable the write protection of the desired bank1 or bank 2 sectors
+ *
+ * @note When the memory read protection level is selected (RDP level = 1),
+ * it is not possible to program or erase the flash sector i if CortexM4
+ * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
+ *
+ * @param WRPSector specifies the sector(s) to be write protected.
+ * This parameter can be one of the following values:
+ * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_7 (for STM32F74xxx/STM32F75xxx devices)
+ * or a value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_11 (in Single Bank mode for STM32F76xxx/STM32F77xxx devices)
+ * or a value between OB_WRP_DB_SECTOR_0 and OB_WRP_DB_SECTOR_23 (in Dual Bank mode for STM32F76xxx/STM32F77xxx devices)
+ * @arg OB_WRP_Sector_All
+ *
+ *
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_WRP_SECTOR(WRPSector));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Write protection disabled on sectors */
+ FLASH->OPTCR |= (WRPSector);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Set the read protection level.
+ * @param Level specifies the read protection level.
+ * This parameter can be one of the following values:
+ * @arg OB_RDP_LEVEL_0: No protection
+ * @arg OB_RDP_LEVEL_1: Read protection of the memory
+ * @arg OB_RDP_LEVEL_2: Full chip protection
+ *
+ * @note WARNING: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0
+ *
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_RDP_LEVEL(Level));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ *(__IO uint8_t*)OPTCR_BYTE1_ADDRESS = Level;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Set the BOR Level.
+ * @param Level specifies the Option Bytes BOR Reset Level.
+ * This parameter can be one of the following values:
+ * @arg OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V
+ * @arg OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V
+ * @arg OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V
+ * @arg OB_BOR_OFF: Supply voltage ranges from 1.62 to 2.1 V
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level)
+{
+ /* Check the parameters */
+ assert_param(IS_OB_BOR_LEVEL(Level));
+
+ /* Set the BOR Level */
+ MODIFY_REG(FLASH->OPTCR, FLASH_OPTCR_BOR_LEV, Level);
+
+ return HAL_OK;
+
+}
+
+/**
+ * @brief Configure Boot base address.
+ *
+ * @param BootOption specifies Boot base address depending from Boot pin = 0 or pin = 1
+ * This parameter can be one of the following values:
+ * @arg OPTIONBYTE_BOOTADDR_0 : Boot address based when Boot pin = 0
+ * @arg OPTIONBYTE_BOOTADDR_1 : Boot address based when Boot pin = 1
+ * @param Address specifies Boot base address
+ * This parameter can be one of the following values:
+ * @arg OB_BOOTADDR_ITCM_RAM : Boot from ITCM RAM (0x00000000)
+ * @arg OB_BOOTADDR_SYSTEM : Boot from System memory bootloader (0x00100000)
+ * @arg OB_BOOTADDR_ITCM_FLASH : Boot from Flash on ITCM interface (0x00200000)
+ * @arg OB_BOOTADDR_AXIM_FLASH : Boot from Flash on AXIM interface (0x08000000)
+ * @arg OB_BOOTADDR_DTCM_RAM : Boot from DTCM RAM (0x20000000)
+ * @arg OB_BOOTADDR_SRAM1 : Boot from SRAM1 (0x20010000)
+ * @arg OB_BOOTADDR_SRAM2 : Boot from SRAM2 (0x2004C000)
+ *
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_BootAddressConfig(uint32_t BootOption, uint32_t Address)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_BOOT_ADDRESS(Address));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ if(BootOption == OPTIONBYTE_BOOTADDR_0)
+ {
+ MODIFY_REG(FLASH->OPTCR1, FLASH_OPTCR1_BOOT_ADD0, Address);
+ }
+ else
+ {
+ MODIFY_REG(FLASH->OPTCR1, FLASH_OPTCR1_BOOT_ADD1, (Address << 16));
+ }
+ }
+
+ return status;
+}
+
+/**
+ * @brief Returns the FLASH Read Protection level.
+ * @retval FlagStatus FLASH ReadOut Protection Status:
+ * This parameter can be one of the following values:
+ * @arg OB_RDP_LEVEL_0: No protection
+ * @arg OB_RDP_LEVEL_1: Read protection of the memory
+ * @arg OB_RDP_LEVEL_2: Full chip protection
+ */
+static uint8_t FLASH_OB_GetRDP(void)
+{
+ uint8_t readstatus = OB_RDP_LEVEL_0;
+
+ if ((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS)) == OB_RDP_LEVEL_0)
+ {
+ readstatus = OB_RDP_LEVEL_0;
+ }
+ else if ((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS)) == OB_RDP_LEVEL_2)
+ {
+ readstatus = OB_RDP_LEVEL_2;
+ }
+ else
+ {
+ readstatus = OB_RDP_LEVEL_1;
+ }
+
+ return readstatus;
+}
+
+/**
+ * @brief Returns the FLASH BOR level.
+ * @retval uint32_t The FLASH BOR level:
+ * - OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V
+ * - OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V
+ * - OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V
+ * - OB_BOR_OFF : Supply voltage ranges from 1.62 to 2.1 V
+ */
+static uint32_t FLASH_OB_GetBOR(void)
+{
+ /* Return the FLASH BOR level */
+ return ((uint32_t)(FLASH->OPTCR & 0x0C));
+}
+
+/**
+ * @brief Configure Boot base address.
+ *
+ * @param BootOption specifies Boot base address depending from Boot pin = 0 or pin = 1
+ * This parameter can be one of the following values:
+ * @arg OPTIONBYTE_BOOTADDR_0 : Boot address based when Boot pin = 0
+ * @arg OPTIONBYTE_BOOTADDR_1 : Boot address based when Boot pin = 1
+ *
+ * @retval uint32_t Boot Base Address:
+ * - OB_BOOTADDR_ITCM_RAM : Boot from ITCM RAM (0x00000000)
+ * - OB_BOOTADDR_SYSTEM : Boot from System memory bootloader (0x00100000)
+ * - OB_BOOTADDR_ITCM_FLASH : Boot from Flash on ITCM interface (0x00200000)
+ * - OB_BOOTADDR_AXIM_FLASH : Boot from Flash on AXIM interface (0x08000000)
+ * - OB_BOOTADDR_DTCM_RAM : Boot from DTCM RAM (0x20000000)
+ * - OB_BOOTADDR_SRAM1 : Boot from SRAM1 (0x20010000)
+ * - OB_BOOTADDR_SRAM2 : Boot from SRAM2 (0x2004C000)
+ */
+static uint32_t FLASH_OB_GetBootAddress(uint32_t BootOption)
+{
+ uint32_t Address = 0;
+
+ /* Return the Boot base Address */
+ if(BootOption == OPTIONBYTE_BOOTADDR_0)
+ {
+ Address = FLASH->OPTCR1 & FLASH_OPTCR1_BOOT_ADD0;
+ }
+ else
+ {
+ Address = ((FLASH->OPTCR1 & FLASH_OPTCR1_BOOT_ADD1) >> 16);
+ }
+
+ return Address;
+}
+
+#if defined (FLASH_OPTCR2_PCROP)
+/**
+ * @brief Set the PCROP protection for sectors.
+ * @param PCROPSector specifies the sector(s) to be PCROP protected.
+ * This parameter can be one of the following values:
+ * @arg OB_PCROP_SECTOR_x: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_7
+ * @arg OB_PCROP_SECTOR_ALL
+ *
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_PCROP_Config(uint32_t PCROPSector)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_PCROP_SECTOR(PCROPSector));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ MODIFY_REG(FLASH->OPTCR2, FLASH_OPTCR2_PCROP, PCROPSector);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Set the PCROP_RDP value
+ * @param Pcrop_Rdp specifies the PCROP_RDP bit value.
+ *
+ * @retval HAL Status
+ */
+static HAL_StatusTypeDef FLASH_OB_PCROP_RDP_Config(uint32_t Pcrop_Rdp)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_PCROP_RDP_VALUE(Pcrop_Rdp));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ MODIFY_REG(FLASH->OPTCR2, FLASH_OPTCR2_PCROP_RDP, Pcrop_Rdp);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Return the FLASH PCROP Protection Option Bytes value.
+ * @retval uint32_t FLASH PCROP Protection Option Bytes value
+ */
+static uint32_t FLASH_OB_GetPCROP(void)
+{
+ /* Return the FLASH write protection Register value */
+ return ((uint32_t)(FLASH->OPTCR2 & FLASH_OPTCR2_PCROP));
+}
+
+/**
+ * @brief Return the FLASH PCROP_RDP option byte value.
+ * @retval uint32_t FLASH PCROP_RDP option byte value
+ */
+static uint32_t FLASH_OB_GetPCROPRDP(void)
+{
+ /* Return the FLASH write protection Register value */
+ return ((uint32_t)(FLASH->OPTCR2 & FLASH_OPTCR2_PCROP_RDP));
+}
+#endif /* FLASH_OPTCR2_PCROP */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c
new file mode 100644
index 00000000..0650fd86
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c
@@ -0,0 +1,541 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_gpio.c
+ * @author MCD Application Team
+ * @brief GPIO HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the General Purpose Input/Output (GPIO) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### GPIO Peripheral features #####
+ ==============================================================================
+ [..]
+ Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each
+ port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software
+ in several modes:
+ (+) Input mode
+ (+) Analog mode
+ (+) Output mode
+ (+) Alternate function mode
+ (+) External interrupt/event lines
+
+ [..]
+ During and just after reset, the alternate functions and external interrupt
+ lines are not active and the I/O ports are configured in input floating mode.
+
+ [..]
+ All GPIO pins have weak internal pull-up and pull-down resistors, which can be
+ activated or not.
+
+ [..]
+ In Output or Alternate mode, each IO can be configured on open-drain or push-pull
+ type and the IO speed can be selected depending on the VDD value.
+
+ [..]
+ All ports have external interrupt/event capability. To use external interrupt
+ lines, the port must be configured in input mode. All available GPIO pins are
+ connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
+
+ [..]
+ The external interrupt/event controller consists of up to 23 edge detectors
+ (16 lines are connected to GPIO) for generating event/interrupt requests (each
+ input line can be independently configured to select the type (interrupt or event)
+ and the corresponding trigger event (rising or falling or both). Each line can
+ also be masked independently.
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE().
+
+ (#) Configure the GPIO pin(s) using HAL_GPIO_Init().
+ (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
+ (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef
+ structure.
+ (++) In case of Output or alternate function mode selection: the speed is
+ configured through "Speed" member from GPIO_InitTypeDef structure.
+ (++) In alternate mode is selection, the alternate function connected to the IO
+ is configured through "Alternate" member from GPIO_InitTypeDef structure.
+ (++) Analog mode is required when a pin is to be used as ADC channel
+ or DAC output.
+ (++) In case of external interrupt/event selection the "Mode" member from
+ GPIO_InitTypeDef structure select the type (interrupt or event) and
+ the corresponding trigger event (rising or falling or both).
+
+ (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority
+ mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
+ HAL_NVIC_EnableIRQ().
+
+ (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
+
+ (#) To set/reset the level of a pin configured in output mode use
+ HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
+
+ (#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
+
+
+ (#) During and just after reset, the alternate functions are not
+ active and the GPIO pins are configured in input floating mode (except JTAG
+ pins).
+
+ (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose
+ (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has
+ priority over the GPIO function.
+
+ (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as
+ general purpose PH0 and PH1, respectively, when the HSE oscillator is off.
+ The HSE has priority over the GPIO function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup GPIO GPIO
+ * @brief GPIO HAL module driver
+ * @{
+ */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup GPIO_Private_Constants GPIO Private Constants
+ * @{
+ */
+#define GPIO_MODE ((uint32_t)0x00000003U)
+#define EXTI_MODE ((uint32_t)0x10000000U)
+#define GPIO_MODE_IT ((uint32_t)0x00010000U)
+#define GPIO_MODE_EVT ((uint32_t)0x00020000U)
+#define RISING_EDGE ((uint32_t)0x00100000U)
+#define FALLING_EDGE ((uint32_t)0x00200000U)
+#define GPIO_OUTPUT_TYPE ((uint32_t)0x00000010U)
+
+#define GPIO_NUMBER ((uint32_t)16U)
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+
+/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ This section provides functions allowing to initialize and de-initialize the GPIOs
+ to be ready for use.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init.
+ * @param GPIOx where x can be (A..K) to select the GPIO peripheral.
+ * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains
+ * the configuration information for the specified GPIO peripheral.
+ * @retval None
+ */
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init)
+{
+ uint32_t position = 0x00;
+ uint32_t ioposition = 0x00;
+ uint32_t iocurrent = 0x00;
+ uint32_t temp = 0x00;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
+ assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
+ assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
+
+ /* Configure the port pins */
+ for(position = 0; position < GPIO_NUMBER; position++)
+ {
+ /* Get the IO position */
+ ioposition = ((uint32_t)0x01) << position;
+ /* Get the current IO position */
+ iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition;
+
+ if(iocurrent == ioposition)
+ {
+ /*--------------------- GPIO Mode Configuration ------------------------*/
+ /* In case of Alternate function mode selection */
+ if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ {
+ /* Check the Alternate function parameter */
+ assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
+
+ /* Configure Alternate function mapped with the current IO */
+ temp = GPIOx->AFR[position >> 3];
+ temp &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ;
+ temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & (uint32_t)0x07) * 4));
+ GPIOx->AFR[position >> 3] = temp;
+ }
+
+ /* Configure IO Direction mode (Input, Output, Alternate or Analog) */
+ temp = GPIOx->MODER;
+ temp &= ~(GPIO_MODER_MODER0 << (position * 2));
+ temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2));
+ GPIOx->MODER = temp;
+
+ /* In case of Output or Alternate function mode selection */
+ if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
+ (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ {
+ /* Check the Speed parameter */
+ assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
+ /* Configure the IO Speed */
+ temp = GPIOx->OSPEEDR;
+ temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2));
+ temp |= (GPIO_Init->Speed << (position * 2));
+ GPIOx->OSPEEDR = temp;
+
+ /* Configure the IO Output Type */
+ temp = GPIOx->OTYPER;
+ temp &= ~(GPIO_OTYPER_OT_0 << position) ;
+ temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4) << position);
+ GPIOx->OTYPER = temp;
+ }
+
+ /* Activate the Pull-up or Pull down resistor for the current IO */
+ temp = GPIOx->PUPDR;
+ temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2));
+ temp |= ((GPIO_Init->Pull) << (position * 2));
+ GPIOx->PUPDR = temp;
+
+ /*--------------------- EXTI Mode Configuration ------------------------*/
+ /* Configure the External Interrupt or event for the current IO */
+ if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
+ {
+ /* Enable SYSCFG Clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ temp = SYSCFG->EXTICR[position >> 2];
+ temp &= ~(((uint32_t)0x0F) << (4 * (position & 0x03)));
+ temp |= ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4 * (position & 0x03)));
+ SYSCFG->EXTICR[position >> 2] = temp;
+
+ /* Clear EXTI line configuration */
+ temp = EXTI->IMR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->IMR = temp;
+
+ temp = EXTI->EMR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->EMR = temp;
+
+ /* Clear Rising Falling edge configuration */
+ temp = EXTI->RTSR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->RTSR = temp;
+
+ temp = EXTI->FTSR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->FTSR = temp;
+ }
+ }
+ }
+}
+
+/**
+ * @brief De-initializes the GPIOx peripheral registers to their default reset values.
+ * @param GPIOx where x can be (A..K) to select the GPIO peripheral.
+ * @param GPIO_Pin specifies the port bit to be written.
+ * This parameter can be one of GPIO_PIN_x where x can be (0..15).
+ * @retval None
+ */
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin)
+{
+ uint32_t position;
+ uint32_t ioposition = 0x00;
+ uint32_t iocurrent = 0x00;
+ uint32_t tmp = 0x00;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+
+ /* Configure the port pins */
+ for(position = 0; position < GPIO_NUMBER; position++)
+ {
+ /* Get the IO position */
+ ioposition = ((uint32_t)0x01) << position;
+ /* Get the current IO position */
+ iocurrent = (GPIO_Pin) & ioposition;
+
+ if(iocurrent == ioposition)
+ {
+ /*------------------------- GPIO Mode Configuration --------------------*/
+ /* Configure IO Direction in Input Floating Mode */
+ GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2));
+
+ /* Configure the default Alternate Function in current IO */
+ GPIOx->AFR[position >> 3] &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ;
+
+ /* Configure the default value for IO Speed */
+ GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2));
+
+ /* Configure the default value IO Output Type */
+ GPIOx->OTYPER &= ~(GPIO_OTYPER_OT_0 << position) ;
+
+ /* Deactivate the Pull-up and Pull-down resistor for the current IO */
+ GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2));
+
+ /*------------------------- EXTI Mode Configuration --------------------*/
+ tmp = SYSCFG->EXTICR[position >> 2];
+ tmp &= (((uint32_t)0x0F) << (4 * (position & 0x03)));
+ if(tmp == ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4 * (position & 0x03))))
+ {
+ /* Configure the External Interrupt or event for the current IO */
+ tmp = ((uint32_t)0x0F) << (4 * (position & 0x03));
+ SYSCFG->EXTICR[position >> 2] &= ~tmp;
+
+ /* Clear EXTI line configuration */
+ EXTI->IMR &= ~((uint32_t)iocurrent);
+ EXTI->EMR &= ~((uint32_t)iocurrent);
+
+ /* Clear Rising Falling edge configuration */
+ EXTI->RTSR &= ~((uint32_t)iocurrent);
+ EXTI->FTSR &= ~((uint32_t)iocurrent);
+ }
+ }
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions
+ * @brief GPIO Read and Write
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Reads the specified input port pin.
+ * @param GPIOx where x can be (A..K) to select the GPIO peripheral.
+ * @param GPIO_Pin specifies the port bit to read.
+ * This parameter can be GPIO_PIN_x where x can be (0..15).
+ * @retval The input port pin value.
+ */
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ GPIO_PinState bitstatus;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ if((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET)
+ {
+ bitstatus = GPIO_PIN_SET;
+ }
+ else
+ {
+ bitstatus = GPIO_PIN_RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Sets or clears the selected data port bit.
+ *
+ * @note This function uses GPIOx_BSRR register to allow atomic read/modify
+ * accesses. In this way, there is no risk of an IRQ occurring between
+ * the read and the modify access.
+ *
+ * @param GPIOx where x can be (A..K) to select the GPIO peripheral.
+ * @param GPIO_Pin specifies the port bit to be written.
+ * This parameter can be one of GPIO_PIN_x where x can be (0..15).
+ * @param PinState specifies the value to be written to the selected bit.
+ * This parameter can be one of the GPIO_PinState enum values:
+ * @arg GPIO_PIN_RESET: to clear the port pin
+ * @arg GPIO_PIN_SET: to set the port pin
+ * @retval None
+ */
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+ assert_param(IS_GPIO_PIN_ACTION(PinState));
+
+ if(PinState != GPIO_PIN_RESET)
+ {
+ GPIOx->BSRR = GPIO_Pin;
+ }
+ else
+ {
+ GPIOx->BSRR = (uint32_t)GPIO_Pin << 16;
+ }
+}
+
+/**
+ * @brief Toggles the specified GPIO pins.
+ * @param GPIOx Where x can be (A..I) to select the GPIO peripheral.
+ * @param GPIO_Pin Specifies the pins to be toggled.
+ * @retval None
+ */
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ GPIOx->ODR ^= GPIO_Pin;
+}
+
+/**
+ * @brief Locks GPIO Pins configuration registers.
+ * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
+ * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
+ * @note The configuration of the locked GPIO pins can no longer be modified
+ * until the next reset.
+ * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F7 family
+ * @param GPIO_Pin specifies the port bit to be locked.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15).
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ __IO uint32_t tmp = GPIO_LCKR_LCKK;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ /* Apply lock key write sequence */
+ tmp |= GPIO_Pin;
+ /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+ GPIOx->LCKR = tmp;
+ /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */
+ GPIOx->LCKR = GPIO_Pin;
+ /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+ GPIOx->LCKR = tmp;
+ /* Read LCKK bit*/
+ tmp = GPIOx->LCKR;
+
+ if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET)
+ {
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief This function handles EXTI interrupt request.
+ * @param GPIO_Pin Specifies the pins connected EXTI line
+ * @retval None
+ */
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
+{
+ /* EXTI line interrupt detected */
+ if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET)
+ {
+ __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin);
+ HAL_GPIO_EXTI_Callback(GPIO_Pin);
+ }
+}
+
+/**
+ * @brief EXTI line detection callbacks.
+ * @param GPIO_Pin Specifies the pins connected EXTI line
+ * @retval None
+ */
+__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(GPIO_Pin);
+
+ /* NOTE: This function Should not be modified, when the callback is needed,
+ the HAL_GPIO_EXTI_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+#endif /* HAL_GPIO_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c
new file mode 100644
index 00000000..15e7e6e8
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c
@@ -0,0 +1,4874 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_i2c.c
+ * @author MCD Application Team
+ * @brief I2C HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Inter Integrated Circuit (I2C) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State and Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The I2C HAL driver can be used as follows:
+
+ (#) Declare a I2C_HandleTypeDef handle structure, for example:
+ I2C_HandleTypeDef hi2c;
+
+ (#)Initialize the I2C low level resources by implementing the HAL_I2C_MspInit() API:
+ (##) Enable the I2Cx interface clock
+ (##) I2C pins configuration
+ (+++) Enable the clock for the I2C GPIOs
+ (+++) Configure I2C pins as alternate function open-drain
+ (##) NVIC configuration if you need to use interrupt process
+ (+++) Configure the I2Cx interrupt priority
+ (+++) Enable the NVIC I2C IRQ Channel
+ (##) DMA Configuration if you need to use DMA process
+ (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream
+ (+++) Enable the DMAx interface clock using
+ (+++) Configure the DMA handle parameters
+ (+++) Configure the DMA Tx or Rx stream
+ (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on
+ the DMA Tx or Rx stream
+
+ (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode,
+ Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure.
+
+ (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware
+ (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API.
+
+ (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady()
+
+ (#) For I2C IO and IO MEM operations, three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit()
+ (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive()
+ (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit()
+ (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive()
+
+ *** Polling mode IO MEM operation ***
+ =====================================
+ [..]
+ (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write()
+ (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read()
+
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Transmit in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Transmit_IT()
+ (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback()
+ (+) Receive in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Receive_IT()
+ (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback()
+ (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Transmit_IT()
+ (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback()
+ (+) Receive in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Receive_IT()
+ (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback()
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+ (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT()
+ (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_AbortCpltCallback()
+ (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro.
+ This action will inform Master to generate a Stop condition to discard the communication.
+
+
+ *** Interrupt mode IO sequential operation ***
+ ==============================================
+ [..]
+ (@) These interfaces allow to manage a sequential transfer with a repeated start condition
+ when a direction change during transfer
+ [..]
+ (+) A specific option field manage the different steps of a sequential transfer
+ (+) Option field values are defined through @ref I2C_XFEROPTIONS and are listed below:
+ (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functionnal is same as associated interfaces in no sequential mode
+ (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address
+ and data to transfer without a final stop condition
+ (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with start condition, address
+ and data to transfer without a final stop condition, an then permit a call the same master sequential interface
+ several times (like HAL_I2C_Master_Sequential_Transmit_IT() then HAL_I2C_Master_Sequential_Transmit_IT())
+ (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address
+ and with new data to transfer if the direction change or manage only the new data to transfer
+ if no direction change and without a final stop condition in both cases
+ (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address
+ and with new data to transfer if the direction change or manage only the new data to transfer
+ if no direction change and with a final stop condition in both cases
+ (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition after several call of the same master sequential
+ interface several times (link with option I2C_FIRST_AND_NEXT_FRAME).
+ Usage can, transfer several bytes one by one using HAL_I2C_Master_Sequential_Transmit_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME)
+ or HAL_I2C_Master_Sequential_Receive_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME).
+ Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or Receive sequence permit to call the oposite interface Receive or Transmit
+ without stopping the communication and so generate a restart condition.
+
+ (+) Differents sequential I2C interfaces are listed below:
+ (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Sequential_Transmit_IT()
+ (+++) At transmission end of current frame transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback()
+ (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Sequential_Receive_IT()
+ (+++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback()
+ (++) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT()
+ (+++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_AbortCpltCallback()
+ (++) Enable/disable the Address listen mode in slave I2C mode using HAL_I2C_EnableListen_IT() HAL_I2C_DisableListen_IT()
+ (+++) When address slave I2C match, HAL_I2C_AddrCallback() is executed and user can
+ add his own code to check the Address Match Code and the transmission direction request by master (Write/Read).
+ (+++) At Listen mode end HAL_I2C_ListenCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ListenCpltCallback()
+ (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Sequential_Transmit_IT()
+ (+++) At transmission end of current frame transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback()
+ (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Sequential_Receive_IT()
+ (+++) At reception end of current frame transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback()
+ (++) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+ (++) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT()
+ (++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_AbortCpltCallback()
+ (++) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro.
+ This action will inform Master to generate a Stop condition to discard the communication.
+
+ *** Interrupt mode IO MEM operation ***
+ =======================================
+ [..]
+ (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using
+ HAL_I2C_Mem_Write_IT()
+ (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback()
+ (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using
+ HAL_I2C_Mem_Read_IT()
+ (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback()
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using
+ HAL_I2C_Master_Transmit_DMA()
+ (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback()
+ (+) Receive in master mode an amount of data in non-blocking mode (DMA) using
+ HAL_I2C_Master_Receive_DMA()
+ (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback()
+ (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using
+ HAL_I2C_Slave_Transmit_DMA()
+ (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback()
+ (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using
+ HAL_I2C_Slave_Receive_DMA()
+ (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback()
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+ (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT()
+ (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_AbortCpltCallback()
+ (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro.
+ This action will inform Master to generate a Stop condition to discard the communication.
+
+ *** DMA mode IO MEM operation ***
+ =================================
+ [..]
+ (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using
+ HAL_I2C_Mem_Write_DMA()
+ (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback()
+ (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using
+ HAL_I2C_Mem_Read_DMA()
+ (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback()
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+
+
+ *** I2C HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in I2C HAL driver.
+
+ (+) __HAL_I2C_ENABLE: Enable the I2C peripheral
+ (+) __HAL_I2C_DISABLE: Disable the I2C peripheral
+ (+) __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode
+ (+) __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not
+ (+) __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag
+ (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt
+ (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt
+
+ [..]
+ (@) You can refer to the I2C HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup I2C I2C
+ * @brief I2C HAL module driver
+ * @{
+ */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup I2C_Private_Define I2C Private Define
+ * @{
+ */
+#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */
+#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */
+#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */
+
+#define MAX_NBYTE_SIZE 255U
+#define SlaveAddr_SHIFT 7U
+#define SlaveAddr_MSK 0x06U
+
+/* Private define for @ref PreviousState usage */
+#define I2C_STATE_MSK ((uint32_t)((HAL_I2C_STATE_BUSY_TX | HAL_I2C_STATE_BUSY_RX) & (~((uint32_t)HAL_I2C_STATE_READY)))) /*!< Mask State define, keep only RX and TX bits */
+#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) /*!< Default Value */
+#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)((HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | HAL_I2C_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)((HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | HAL_I2C_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)((HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | HAL_I2C_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)((HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | HAL_I2C_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MEM_BUSY_TX ((uint32_t)((HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | HAL_I2C_MODE_MEM)) /*!< Memory Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MEM_BUSY_RX ((uint32_t)((HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | HAL_I2C_MODE_MEM)) /*!< Memory Busy RX, combinaison of State LSB and Mode enum */
+
+
+/* Private define to centralize the enable/disable of Interrupts */
+#define I2C_XFER_TX_IT (0x00000001U)
+#define I2C_XFER_RX_IT (0x00000002U)
+#define I2C_XFER_LISTEN_IT (0x00000004U)
+
+#define I2C_XFER_ERROR_IT (0x00000011U)
+#define I2C_XFER_CPLT_IT (0x00000012U)
+#define I2C_XFER_RELOAD_IT (0x00000012U)
+
+/* Private define Sequential Transfer Options default/reset value */
+#define I2C_NO_OPTION_FRAME (0xFFFF0000U)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+#define I2C_GET_DMA_REMAIN_DATA(__HANDLE__) ((((__HANDLE__)->State) == HAL_I2C_STATE_BUSY_TX) ? \
+ ((uint32_t)(((DMA_Stream_TypeDef *)(__HANDLE__)->hdmatx->Instance)->NDTR)) : \
+ ((uint32_t)(((DMA_Stream_TypeDef *)(__HANDLE__)->hdmarx->Instance)->NDTR)))
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/** @defgroup I2C_Private_Functions I2C Private Functions
+ * @{
+ */
+/* Private functions to handle DMA transfer */
+static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAError(DMA_HandleTypeDef *hdma);
+static void I2C_DMAAbort(DMA_HandleTypeDef *hdma);
+
+/* Private functions to handle IT transfer */
+static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITMasterSequentialCplt(I2C_HandleTypeDef *hi2c);
+static void I2C_ITSlaveSequentialCplt(I2C_HandleTypeDef *hi2c);
+static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode);
+
+/* Private functions to handle IT transfer */
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
+
+/* Private functions for I2C transfer IRQ handler */
+static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+
+/* Private functions to handle flags during polling transfer */
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+
+/* Private functions to centralize the enable/disable of Interrupts */
+static HAL_StatusTypeDef I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest);
+static HAL_StatusTypeDef I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest);
+
+/* Private functions to flush TXDR register */
+static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c);
+
+/* Private functions to handle start, restart or stop a transfer */
+static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Functions I2C Exported Functions
+ * @{
+ */
+
+/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ deinitialize the I2Cx peripheral:
+
+ (+) User must Implement HAL_I2C_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+ (+) Call the function HAL_I2C_Init() to configure the selected device with
+ the selected configuration:
+ (++) Clock Timing
+ (++) Own Address 1
+ (++) Addressing mode (Master, Slave)
+ (++) Dual Addressing mode
+ (++) Own Address 2
+ (++) Own Address 2 Mask
+ (++) General call mode
+ (++) Nostretch mode
+
+ (+) Call the function HAL_I2C_DeInit() to restore the default configuration
+ of the selected I2Cx peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the I2C according to the specified parameters
+ * in the I2C_InitTypeDef and initialize the associated handle.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c)
+{
+ /* Check the I2C handle allocation */
+ if (hi2c == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1));
+ assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode));
+ assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode));
+ assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2));
+ assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks));
+ assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode));
+ assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode));
+
+ if (hi2c->State == HAL_I2C_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hi2c->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+ HAL_I2C_MspInit(hi2c);
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /*---------------------------- I2Cx TIMINGR Configuration ------------------*/
+ /* Configure I2Cx: Frequency range */
+ hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK;
+
+ /*---------------------------- I2Cx OAR1 Configuration ---------------------*/
+ /* Disable Own Address1 before set the Own Address1 configuration */
+ hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN;
+
+ /* Configure I2Cx: Own Address1 and ack own address1 mode */
+ if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
+ {
+ hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1);
+ }
+ else /* I2C_ADDRESSINGMODE_10BIT */
+ {
+ hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1);
+ }
+
+ /*---------------------------- I2Cx CR2 Configuration ----------------------*/
+ /* Configure I2Cx: Addressing Master mode */
+ if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+ {
+ hi2c->Instance->CR2 = (I2C_CR2_ADD10);
+ }
+ /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */
+ hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK);
+
+ /*---------------------------- I2Cx OAR2 Configuration ---------------------*/
+ /* Disable Own Address2 before set the Own Address2 configuration */
+ hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE;
+
+ /* Configure I2Cx: Dual mode and Own Address2 */
+ hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | (hi2c->Init.OwnAddress2Masks << 8));
+
+ /*---------------------------- I2Cx CR1 Configuration ----------------------*/
+ /* Configure I2Cx: Generalcall and NoStretch mode */
+ hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode);
+
+ /* Enable the selected I2C peripheral */
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitialize the I2C peripheral.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c)
+{
+ /* Check the I2C handle allocation */
+ if (hi2c == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the I2C Peripheral Clock */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_I2C_MspDeInit(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->State = HAL_I2C_STATE_RESET;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the I2C MSP.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitialize the I2C MSP.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the I2C data
+ transfers.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode : The communication is performed in the polling mode.
+ The status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode : The communication is performed using Interrupts
+ or DMA. These functions return the status of the transfer startup.
+ The end of the data processing will be indicated through the
+ dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+
+ (#) Blocking mode functions are :
+ (++) HAL_I2C_Master_Transmit()
+ (++) HAL_I2C_Master_Receive()
+ (++) HAL_I2C_Slave_Transmit()
+ (++) HAL_I2C_Slave_Receive()
+ (++) HAL_I2C_Mem_Write()
+ (++) HAL_I2C_Mem_Read()
+ (++) HAL_I2C_IsDeviceReady()
+
+ (#) No-Blocking mode functions with Interrupt are :
+ (++) HAL_I2C_Master_Transmit_IT()
+ (++) HAL_I2C_Master_Receive_IT()
+ (++) HAL_I2C_Slave_Transmit_IT()
+ (++) HAL_I2C_Slave_Receive_IT()
+ (++) HAL_I2C_Mem_Write_IT()
+ (++) HAL_I2C_Mem_Read_IT()
+
+ (#) No-Blocking mode functions with DMA are :
+ (++) HAL_I2C_Master_Transmit_DMA()
+ (++) HAL_I2C_Master_Receive_DMA()
+ (++) HAL_I2C_Slave_Transmit_DMA()
+ (++) HAL_I2C_Slave_Receive_DMA()
+ (++) HAL_I2C_Mem_Write_DMA()
+ (++) HAL_I2C_Mem_Read_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_I2C_MemTxCpltCallback()
+ (++) HAL_I2C_MemRxCpltCallback()
+ (++) HAL_I2C_MasterTxCpltCallback()
+ (++) HAL_I2C_MasterRxCpltCallback()
+ (++) HAL_I2C_SlaveTxCpltCallback()
+ (++) HAL_I2C_SlaveRxCpltCallback()
+ (++) HAL_I2C_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmits in master mode an amount of data in blocking mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+ }
+
+ while (hi2c->XferCount > 0U)
+ {
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ hi2c->XferSize--;
+
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+ }
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives in master mode an amount of data in blocking mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+ }
+
+ while (hi2c->XferCount > 0U)
+ {
+ /* Wait until RXNE flag is set */
+ if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+ }
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmits in slave mode an amount of data in blocking mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Wait until ADDR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* If 10bit addressing mode is selected */
+ if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+ {
+ /* Wait until ADDR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+ }
+
+ /* Wait until DIR flag is set Transmitter mode */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ while (hi2c->XferCount > 0U)
+ {
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ }
+
+ /* Wait until STOP flag is set */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Normal use case for Transmitter mode */
+ /* A NACK is generated to confirm the end of transfer */
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Wait until BUSY flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in blocking mode
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Wait until ADDR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* Wait until DIR flag is reset Receiver mode */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ while (hi2c->XferCount > 0U)
+ {
+ /* Wait until RXNE flag is set */
+ if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ /* Store Last receive data if any */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET)
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferCount--;
+ }
+
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferCount--;
+ }
+
+ /* Wait until STOP flag is set */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Wait until BUSY flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in master mode an amount of data in non-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_DMA;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ if (hi2c->XferSize > 0U)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA stream */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+ }
+ else
+ {
+ /* Update Transfer ISR function pointer */
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and generate START condition */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in master mode an amount of data in non-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_DMA;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ if (hi2c->XferSize > 0U)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA stream */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+ }
+ else
+ {
+ /* Update Transfer ISR function pointer */
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ /* Send Slave Address */
+ /* Set NBYTES to read and generate START condition */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Slave_ISR_DMA;
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA stream */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, STOP, NACK, ADDR interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in non-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Slave_ISR_DMA;
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA stream */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, STOP, NACK, ADDR interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in blocking mode to a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+
+ do
+ {
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ hi2c->XferSize--;
+
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+
+ }
+ while (hi2c->XferCount > 0U);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Read an amount of data in blocking mode from a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+ }
+
+ do
+ {
+ /* Wait until RXNE flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+ }
+ while (hi2c->XferCount > 0U);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_NO_STARTSTOP);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_DMA;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA stream */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_NO_STARTSTOP);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be read
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_DMA;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA stream */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Checks if target device is ready for communication.
+ * @note This function is used with Memory devices
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param Trials Number of trials
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ __IO uint32_t I2C_Trials = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ do
+ {
+ /* Generate Start */
+ hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set or a NACK flag is set*/
+ tickstart = HAL_GetTick();
+ while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) && (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) && (hi2c->State != HAL_I2C_STATE_TIMEOUT))
+ {
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ /* Device is ready */
+ hi2c->State = HAL_I2C_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Check if the NACKF flag has not been set */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET)
+ {
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Device is ready */
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Clear STOP Flag, auto generated with autoend*/
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+ }
+
+ /* Check if the maximum allowed number of trials has been reached */
+ if (I2C_Trials++ == Trials)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR2 |= I2C_CR2_STOP;
+
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+ }
+ }
+ while (I2C_Trials < Trials);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt.
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ uint32_t xfermode = 0U;
+ uint32_t xferrequest = I2C_GENERATE_START_WRITE;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = XferOptions;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ /* If size > MAX_NBYTE_SIZE, use reload mode */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = hi2c->XferOptions;
+ }
+
+ /* If transfer direction not change, do not generate Restart Condition */
+ /* Mean Previous state is same as current state */
+ if (hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX)
+ {
+ xferrequest = I2C_NO_STARTSTOP;
+ }
+
+ /* Send Slave Address and set NBYTES to write */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, xferrequest);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ uint32_t xfermode = 0U;
+ uint32_t xferrequest = I2C_GENERATE_START_READ;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = XferOptions;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = hi2c->XferOptions;
+ }
+
+ /* If transfer direction not change, do not generate Restart Condition */
+ /* Mean Previous state is same as current state */
+ if (hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX)
+ {
+ xferrequest = I2C_NO_STARTSTOP;
+ }
+
+ /* Send Slave Address and set NBYTES to read */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, xferrequest);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) == HAL_I2C_STATE_LISTEN)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Disable Interrupts, to prevent preemption during treatment in case of multicall */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */
+ /* and then toggle the HAL slave RX state to TX state */
+ if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN)
+ {
+ /* Disable associated Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = XferOptions;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE)
+ {
+ /* Clear ADDR flag after prepare the transfer parameters */
+ /* This action will generate an acknowledge to the Master */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* REnable ADDR interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) == HAL_I2C_STATE_LISTEN)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Disable Interrupts, to prevent preemption during treatment in case of multicall */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */
+ /* and then toggle the HAL slave TX state to RX state */
+ if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN)
+ {
+ /* Disable associated Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = XferOptions;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT)
+ {
+ /* Clear ADDR flag after prepare the transfer parameters */
+ /* This action will generate an acknowledge to the Master */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* REnable ADDR interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Enable the Address listen mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ /* Enable the Address Match interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Disable the Address listen mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of tmp to prevent undefined behavior of volatile usage */
+ uint32_t tmp;
+
+ /* Disable Address listen mode only if a transfer is not ongoing */
+ if (hi2c->State == HAL_I2C_STATE_LISTEN)
+ {
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->XferISR = NULL;
+
+ /* Disable the Address Match interrupt */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Abort a master I2C IT or DMA process communication with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress)
+{
+ if (hi2c->Mode == HAL_I2C_MODE_MASTER)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ /* Set State at HAL_I2C_STATE_ABORT */
+ hi2c->State = HAL_I2C_STATE_ABORT;
+
+ /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */
+ /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */
+ I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Wrong usage of abort function */
+ /* This function should be used only in case of abort monitored by master device */
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
+
+/**
+ * @brief This function handles I2C event interrupt request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+ /* Get current IT Flags and IT sources value */
+ uint32_t itflags = READ_REG(hi2c->Instance->ISR);
+ uint32_t itsources = READ_REG(hi2c->Instance->CR1);
+
+ /* I2C events treatment -------------------------------------*/
+ if (hi2c->XferISR != NULL)
+ {
+ hi2c->XferISR(hi2c, itflags, itsources);
+ }
+}
+
+/**
+ * @brief This function handles I2C error interrupt request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+ uint32_t itflags = READ_REG(hi2c->Instance->ISR);
+ uint32_t itsources = READ_REG(hi2c->Instance->CR1);
+
+ /* I2C Bus error interrupt occurred ------------------------------------*/
+ if (((itflags & I2C_FLAG_BERR) != RESET) && ((itsources & I2C_IT_ERRI) != RESET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_BERR;
+
+ /* Clear BERR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR);
+ }
+
+ /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/
+ if (((itflags & I2C_FLAG_OVR) != RESET) && ((itsources & I2C_IT_ERRI) != RESET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_OVR;
+
+ /* Clear OVR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR);
+ }
+
+ /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/
+ if (((itflags & I2C_FLAG_ARLO) != RESET) && ((itsources & I2C_IT_ERRI) != RESET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO;
+
+ /* Clear ARLO flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO);
+ }
+
+ /* Call the Error Callback in case of Error detected */
+ if ((hi2c->ErrorCode & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE)
+ {
+ I2C_ITError(hi2c, hi2c->ErrorCode);
+ }
+}
+
+/**
+ * @brief Master Tx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MasterTxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Master Rx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MasterRxCpltCallback could be implemented in the user file
+ */
+}
+
+/** @brief Slave Tx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Slave Rx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Slave Address Match callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION
+ * @param AddrMatchCode Address Match Code
+ * @retval None
+ */
+__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ UNUSED(TransferDirection);
+ UNUSED(AddrMatchCode);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_AddrCallback() could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Listen Complete callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_ListenCpltCallback() could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Memory Tx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MemTxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Memory Rx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MemRxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2C error callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2C abort callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_AbortCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
+ * @brief Peripheral State, Mode and Error functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State, Mode and Error functions #####
+ ===============================================================================
+ [..]
+ This subsection permit to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the I2C handle state.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL state
+ */
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c)
+{
+ /* Return I2C handle state */
+ return hi2c->State;
+}
+
+/**
+ * @brief Returns the I2C Master, Slave, Memory or no mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL mode
+ */
+HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c)
+{
+ return hi2c->Mode;
+}
+
+/**
+ * @brief Return the I2C error code.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+* @retval I2C Error Code
+*/
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c)
+{
+ return hi2c->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ uint16_t devaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ if (((ITFlags & I2C_FLAG_AF) != RESET) && ((ITSources & I2C_IT_NACKI) != RESET))
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set corresponding Error Code */
+ /* No need to generate STOP, it is automatically done */
+ /* Error callback will be send during stop flag treatment */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+ }
+ else if (((ITFlags & I2C_FLAG_RXNE) != RESET) && ((ITSources & I2C_IT_RXI) != RESET))
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+ }
+ else if (((ITFlags & I2C_FLAG_TXIS) != RESET) && ((ITSources & I2C_IT_TXI) != RESET))
+ {
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+ }
+ else if (((ITFlags & I2C_FLAG_TCR) != RESET) && ((ITSources & I2C_IT_TCI) != RESET))
+ {
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ devaddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, devaddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ if (hi2c->XferOptions != I2C_NO_OPTION_FRAME)
+ {
+ I2C_TransferConfig(hi2c, devaddress, hi2c->XferSize, hi2c->XferOptions, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c, devaddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+ }
+ else
+ {
+ /* Call TxCpltCallback() if no stop mode is set */
+ if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE)
+ {
+ /* Call I2C Master Sequential complete process */
+ I2C_ITMasterSequentialCplt(hi2c);
+ }
+ else
+ {
+ /* Wrong size Status regarding TCR flag event */
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
+ }
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_TC) != RESET) && ((ITSources & I2C_IT_TCI) != RESET))
+ {
+ if (hi2c->XferCount == 0U)
+ {
+ if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE)
+ {
+ /* Generate a stop condition in case of no transfer option */
+ if (hi2c->XferOptions == I2C_NO_OPTION_FRAME)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR2 |= I2C_CR2_STOP;
+ }
+ else
+ {
+ /* Call I2C Master Sequential complete process */
+ I2C_ITMasterSequentialCplt(hi2c);
+ }
+ }
+ }
+ else
+ {
+ /* Wrong size Status regarding TC flag event */
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
+ }
+ }
+
+ if (((ITFlags & I2C_FLAG_STOPF) != RESET) && ((ITSources & I2C_IT_STOPI) != RESET))
+ {
+ /* Call I2C Master complete process */
+ I2C_ITMasterCplt(hi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ /* Process locked */
+ __HAL_LOCK(hi2c);
+
+ if (((ITFlags & I2C_FLAG_AF) != RESET) && ((ITSources & I2C_IT_NACKI) != RESET))
+ {
+ /* Check that I2C transfer finished */
+ /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */
+ /* Mean XferCount == 0*/
+ /* So clear Flag NACKF only */
+ if (hi2c->XferCount == 0U)
+ {
+ if (((hi2c->XferOptions == I2C_FIRST_AND_LAST_FRAME) || (hi2c->XferOptions == I2C_LAST_FRAME)) && \
+ (hi2c->State == HAL_I2C_STATE_LISTEN))
+ {
+ /* Call I2C Listen complete process */
+ I2C_ITListenCplt(hi2c, ITFlags);
+ }
+ else if ((hi2c->XferOptions != I2C_NO_OPTION_FRAME) && (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN))
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+
+ /* Last Byte is Transmitted */
+ /* Call I2C Slave Sequential complete process */
+ I2C_ITSlaveSequentialCplt(hi2c);
+ }
+ else
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+ }
+ }
+ else
+ {
+ /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_RXNE) != RESET) && ((ITSources & I2C_IT_RXI) != RESET))
+ {
+ if (hi2c->XferCount > 0U)
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+ }
+
+ if ((hi2c->XferCount == 0U) && \
+ (hi2c->XferOptions != I2C_NO_OPTION_FRAME))
+ {
+ /* Call I2C Slave Sequential complete process */
+ I2C_ITSlaveSequentialCplt(hi2c);
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_ADDR) != RESET) && ((ITSources & I2C_IT_ADDRI) != RESET))
+ {
+ I2C_ITAddrCplt(hi2c, ITFlags);
+ }
+ else if (((ITFlags & I2C_FLAG_TXIS) != RESET) && ((ITSources & I2C_IT_TXI) != RESET))
+ {
+ /* Write data to TXDR only if XferCount not reach "0" */
+ /* A TXIS flag can be set, during STOP treatment */
+ /* Check if all Datas have already been sent */
+ /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */
+ if (hi2c->XferCount > 0U)
+ {
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ hi2c->XferSize--;
+ }
+ else
+ {
+ if ((hi2c->XferOptions == I2C_NEXT_FRAME) || (hi2c->XferOptions == I2C_FIRST_FRAME))
+ {
+ /* Last Byte is Transmitted */
+ /* Call I2C Slave Sequential complete process */
+ I2C_ITSlaveSequentialCplt(hi2c);
+ }
+ }
+ }
+
+ /* Check if STOPF is set */
+ if (((ITFlags & I2C_FLAG_STOPF) != RESET) && ((ITSources & I2C_IT_STOPI) != RESET))
+ {
+ /* Call I2C Slave complete process */
+ I2C_ITSlaveCplt(hi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ uint16_t devaddress = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ if (((ITFlags & I2C_FLAG_AF) != RESET) && ((ITSources & I2C_IT_NACKI) != RESET))
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set corresponding Error Code */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+
+ /* No need to generate STOP, it is automatically done */
+ /* But enable STOP interrupt, to treat it */
+ /* Error callback will be send during stop flag treatment */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+ }
+ else if (((ITFlags & I2C_FLAG_TCR) != RESET) && ((ITSources & I2C_IT_TCI) != RESET))
+ {
+ /* Disable TC interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI);
+
+ if (hi2c->XferCount != 0U)
+ {
+ /* Recover Slave address */
+ devaddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+
+ /* Prepare the new XferSize to transfer */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Set the new XferSize in Nbytes register */
+ I2C_TransferConfig(hi2c, devaddress, hi2c->XferSize, xfermode, I2C_NO_STARTSTOP);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Enable DMA Request */
+ if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
+ {
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+ }
+ else
+ {
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+ }
+ }
+ else
+ {
+ /* Wrong size Status regarding TCR flag event */
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_STOPF) != RESET) && ((ITSources & I2C_IT_STOPI) != RESET))
+ {
+ /* Call I2C Master complete process */
+ I2C_ITMasterCplt(hi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ /* Process locked */
+ __HAL_LOCK(hi2c);
+
+ if (((ITFlags & I2C_FLAG_AF) != RESET) && ((ITSources & I2C_IT_NACKI) != RESET))
+ {
+ /* Check that I2C transfer finished */
+ /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */
+ /* Mean XferCount == 0 */
+ /* So clear Flag NACKF only */
+ if (I2C_GET_DMA_REMAIN_DATA(hi2c) == 0U)
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+ }
+ else
+ {
+ /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_ADDR) != RESET) && ((ITSources & I2C_IT_ADDRI) != RESET))
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+ }
+ else if (((ITFlags & I2C_FLAG_STOPF) != RESET) && ((ITSources & I2C_IT_STOPI) != RESET))
+ {
+ /* Call I2C Slave complete process */
+ I2C_ITSlaveCplt(hi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address followed by internal memory address for write request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+{
+ I2C_TransferConfig(hi2c, DevAddress, MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
+
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* If Memory address size is 8Bit */
+ if (MemAddSize == I2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+ /* If Memory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress);
+
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send LSB of Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address followed by internal memory address for read request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address which contain device 7 or 10 bits address value
+ * in datasheet must be shifted to the left before calling the interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+{
+ I2C_TransferConfig(hi2c, DevAddress, MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE);
+
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* If Memory address size is 8Bit */
+ if (MemAddSize == I2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+ /* If Memory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress);
+
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send LSB of Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+
+ /* Wait until TC flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief I2C Address complete process callback.
+ * @param hi2c I2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+ uint8_t transferdirection = 0U;
+ uint16_t slaveaddrcode = 0U;
+ uint16_t ownadd1code = 0U;
+ uint16_t ownadd2code = 0U;
+
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(ITFlags);
+
+ /* In case of Listen state, need to inform upper layer of address match code event */
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) == HAL_I2C_STATE_LISTEN)
+ {
+ transferdirection = I2C_GET_DIR(hi2c);
+ slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c);
+ ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c);
+ ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c);
+
+ /* If 10bits addressing mode is selected */
+ if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+ {
+ if ((slaveaddrcode & SlaveAddr_MSK) == ((ownadd1code >> SlaveAddr_SHIFT) & SlaveAddr_MSK))
+ {
+ slaveaddrcode = ownadd1code;
+ hi2c->AddrEventCount++;
+ if (hi2c->AddrEventCount == 2U)
+ {
+ /* Reset Address Event counter */
+ hi2c->AddrEventCount = 0U;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call Slave Addr callback */
+ HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode);
+ }
+ }
+ else
+ {
+ slaveaddrcode = ownadd2code;
+
+ /* Disable ADDR Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call Slave Addr callback */
+ HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode);
+ }
+ }
+ /* else 7 bits addressing mode is selected */
+ else
+ {
+ /* Disable ADDR Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call Slave Addr callback */
+ HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode);
+ }
+ }
+ /* Else clear address flag only */
+ else
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Master sequential complete process.
+ * @param hi2c I2C handle.
+ * @retval None
+ */
+static void I2C_ITMasterSequentialCplt(I2C_HandleTypeDef *hi2c)
+{
+ /* Reset I2C handle mode */
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* No Generate Stop, to permit restart mode */
+ /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */
+ if (hi2c->State == HAL_I2C_STATE_BUSY_TX)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX;
+ hi2c->XferISR = NULL;
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_MasterTxCpltCallback(hi2c);
+ }
+ /* hi2c->State == HAL_I2C_STATE_BUSY_RX */
+ else
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX;
+ hi2c->XferISR = NULL;
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_MasterRxCpltCallback(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Slave sequential complete process.
+ * @param hi2c I2C handle.
+ * @retval None
+ */
+static void I2C_ITSlaveSequentialCplt(I2C_HandleTypeDef *hi2c)
+{
+ /* Reset I2C handle mode */
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN)
+ {
+ /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX;
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Tx complete callback to inform upper layer of the end of transmit process */
+ HAL_I2C_SlaveTxCpltCallback(hi2c);
+ }
+
+ else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN)
+ {
+ /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX;
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Rx complete callback to inform upper layer of the end of receive process */
+ HAL_I2C_SlaveRxCpltCallback(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Master complete process.
+ * @param hi2c I2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ /* Reset handle parameters */
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->XferISR = NULL;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ if ((ITFlags & I2C_FLAG_AF) != RESET)
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set acknowledge error code */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_RX_IT);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ if ((hi2c->ErrorCode != HAL_I2C_ERROR_NONE) || (hi2c->State == HAL_I2C_STATE_ABORT))
+ {
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, hi2c->ErrorCode);
+ }
+ /* hi2c->State == HAL_I2C_STATE_BUSY_TX */
+ else if (hi2c->State == HAL_I2C_STATE_BUSY_TX)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ if (hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_MemTxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_MasterTxCpltCallback(hi2c);
+ }
+ }
+ /* hi2c->State == HAL_I2C_STATE_BUSY_RX */
+ else if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ if (hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ HAL_I2C_MemRxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ HAL_I2C_MasterRxCpltCallback(hi2c);
+ }
+ }
+}
+
+/**
+ * @brief I2C Slave complete process.
+ * @param hi2c I2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* Disable all interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT | I2C_XFER_RX_IT);
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+
+ /* If a DMA is ongoing, Update handle size context */
+ if (((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) ||
+ ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN))
+ {
+ hi2c->XferCount = I2C_GET_DMA_REMAIN_DATA(hi2c);
+ }
+
+ /* All data are not transferred, so set error code accordingly */
+ if (hi2c->XferCount != 0U)
+ {
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+
+ /* Store Last receive data if any */
+ if (((ITFlags & I2C_FLAG_RXNE) != RESET))
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+
+ if ((hi2c->XferSize > 0U))
+ {
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ }
+
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->XferISR = NULL;
+
+ if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, hi2c->ErrorCode);
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ if (hi2c->State == HAL_I2C_STATE_LISTEN)
+ {
+ /* Call I2C Listen complete process */
+ I2C_ITListenCplt(hi2c, ITFlags);
+ }
+ }
+ else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME)
+ {
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ HAL_I2C_ListenCpltCallback(hi2c);
+ }
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ else if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Slave Rx Complete callback */
+ HAL_I2C_SlaveRxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Slave Tx Complete callback */
+ HAL_I2C_SlaveTxCpltCallback(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Listen complete process.
+ * @param hi2c I2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+ /* Reset handle parameters */
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->XferISR = NULL;
+
+ /* Store Last receive data if any */
+ if (((ITFlags & I2C_FLAG_RXNE) != RESET))
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+
+ if ((hi2c->XferSize > 0U))
+ {
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ }
+
+ /* Disable all Interrupts*/
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT);
+
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ HAL_I2C_ListenCpltCallback(hi2c);
+}
+
+/**
+ * @brief I2C interrupts error process.
+ * @param hi2c I2C handle.
+ * @param ErrorCode Error code to handle.
+ * @retval None
+ */
+static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode)
+{
+ /* Reset handle parameters */
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferCount = 0U;
+
+ /* Set new error code */
+ hi2c->ErrorCode |= ErrorCode;
+
+ /* Disable Interrupts */
+ if ((hi2c->State == HAL_I2C_STATE_LISTEN) ||
+ (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) ||
+ (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN))
+ {
+ /* Disable all interrupts, except interrupts related to LISTEN state */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT);
+
+ /* keep HAL_I2C_STATE_LISTEN if set */
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+ }
+ else
+ {
+ /* Disable all interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT);
+
+ /* If state is an abort treatment on goind, don't change state */
+ /* This change will be do later */
+ if (hi2c->State != HAL_I2C_STATE_ABORT)
+ {
+ /* Set HAL_I2C_STATE_READY */
+ hi2c->State = HAL_I2C_STATE_READY;
+ }
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->XferISR = NULL;
+ }
+
+ /* Abort DMA TX transfer if any */
+ if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN)
+ {
+ hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+
+ /* Set the I2C DMA Abort callback :
+ will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+ hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Abort DMA TX */
+ if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK)
+ {
+ /* Call Directly XferAbortCallback function in case of error */
+ hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx);
+ }
+ }
+ /* Abort DMA RX transfer if any */
+ else if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN)
+ {
+ hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+
+ /* Set the I2C DMA Abort callback :
+ will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+ hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Abort DMA RX */
+ if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK)
+ {
+ /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */
+ hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx);
+ }
+ }
+ else if (hi2c->State == HAL_I2C_STATE_ABORT)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_AbortCpltCallback(hi2c);
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Tx data register flush process.
+ * @param hi2c I2C handle.
+ * @retval None
+ */
+static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c)
+{
+ /* If a pending TXIS flag is set */
+ /* Write a dummy data in TXDR to clear it */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET)
+ {
+ hi2c->Instance->TXDR = 0x00U;
+ }
+
+ /* Flush TX register if not empty */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET)
+ {
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE);
+ }
+}
+
+/**
+ * @brief DMA I2C master transmit process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+
+ /* If last transfer, enable STOP interrupt */
+ if (hi2c->XferCount == 0U)
+ {
+ /* Enable STOP interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+ }
+ /* else prepare a new DMA transfer and enable TCReload interrupt */
+ else
+ {
+ /* Update Buffer pointer */
+ hi2c->pBuffPtr += hi2c->XferSize;
+
+ /* Set the XferSize to transfer */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ }
+
+ /* Enable the DMA stream */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Enable TC interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT);
+ }
+}
+
+/**
+ * @brief DMA I2C slave transmit process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+
+ /* No specific action, Master fully manage the generation of STOP condition */
+ /* Mean that this generation can arrive at any time, at the end or during DMA process */
+ /* So STOP condition should be manage through Interrupt treatment */
+}
+
+/**
+ * @brief DMA I2C master receive process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+
+ /* If last transfer, enable STOP interrupt */
+ if (hi2c->XferCount == 0U)
+ {
+ /* Enable STOP interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+ }
+ /* else prepare a new DMA transfer and enable TCReload interrupt */
+ else
+ {
+ /* Update Buffer pointer */
+ hi2c->pBuffPtr += hi2c->XferSize;
+
+ /* Set the XferSize to transfer */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ }
+
+ /* Enable the DMA stream */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize);
+
+ /* Enable TC interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT);
+ }
+}
+
+/**
+ * @brief DMA I2C slave receive process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+
+ /* No specific action, Master fully manage the generation of STOP condition */
+ /* Mean that this generation can arrive at any time, at the end or during DMA process */
+ /* So STOP condition should be manage through Interrupt treatment */
+}
+
+/**
+ * @brief DMA I2C communication error callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMAError(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, HAL_I2C_ERROR_DMA);
+}
+
+/**
+ * @brief DMA I2C communication abort callback
+ * (To be called at end of DMA Abort procedure).
+ * @param hdma DMA handle.
+ * @retval None
+ */
+static void I2C_DMAAbort(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ /* Reset AbortCpltCallback */
+ hi2c->hdmatx->XferAbortCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Check if come from abort from user */
+ if (hi2c->State == HAL_I2C_STATE_ABORT)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_AbortCpltCallback(hi2c);
+ }
+ else
+ {
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Flag Specifies the I2C flag to check.
+ * @param Status The new Flag status (SET or RESET).
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart)
+{
+ while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status)
+ {
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of STOP flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check if a STOPF is detected */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET)
+ {
+ /* Check if an RXNE is pending */
+ /* Store Last receive data if any */
+ if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) && (hi2c->XferSize > 0U))
+ {
+ /* Return HAL_OK */
+ /* The Reading of data from RXDR will be done in caller function */
+ return HAL_OK;
+ }
+ else
+ {
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
+ }
+
+ /* Check for the Timeout */
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles Acknowledge failed detection during an I2C Communication.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
+ {
+ /* Wait until STOP Flag is reset */
+ /* AutoEnd should be initiate after AF */
+ while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
+ {
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear NACKF Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_AF;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set).
+ * @param hi2c I2C handle.
+ * @param DevAddress Specifies the slave address to be programmed.
+ * @param Size Specifies the number of bytes to be programmed.
+ * This parameter must be a value between 0 and 255.
+ * @param Mode New state of the I2C START condition generation.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_RELOAD_MODE Enable Reload mode .
+ * @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode.
+ * @arg @ref I2C_SOFTEND_MODE Enable Software end mode.
+ * @param Request New state of the I2C START condition generation.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition.
+ * @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0).
+ * @arg @ref I2C_GENERATE_START_READ Generate Restart for read request.
+ * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request.
+ * @retval None
+ */
+static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_TRANSFER_MODE(Mode));
+ assert_param(IS_TRANSFER_REQUEST(Request));
+
+ /* update CR2 register */
+ MODIFY_REG(hi2c->Instance->CR2, ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | I2C_CR2_START | I2C_CR2_STOP)), \
+ (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | (uint32_t)Mode | (uint32_t)Request));
+}
+
+/**
+ * @brief Manage the enabling of Interrupts.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest)
+{
+ uint32_t tmpisr = 0U;
+
+ if ((hi2c->XferISR == I2C_Master_ISR_DMA) || \
+ (hi2c->XferISR == I2C_Slave_ISR_DMA))
+ {
+ if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
+ {
+ /* Enable ERR, STOP, NACK and ADDR interrupts */
+ tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_ERROR_IT) == I2C_XFER_ERROR_IT)
+ {
+ /* Enable ERR and NACK interrupts */
+ tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_CPLT_IT) == I2C_XFER_CPLT_IT)
+ {
+ /* Enable STOP interrupts */
+ tmpisr |= I2C_IT_STOPI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_RELOAD_IT) == I2C_XFER_RELOAD_IT)
+ {
+ /* Enable TC interrupts */
+ tmpisr |= I2C_IT_TCI;
+ }
+ }
+ else
+ {
+ if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
+ {
+ /* Enable ERR, STOP, NACK, and ADDR interrupts */
+ tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT)
+ {
+ /* Enable ERR, TC, STOP, NACK and RXI interrupts */
+ tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT)
+ {
+ /* Enable ERR, TC, STOP, NACK and TXI interrupts */
+ tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_CPLT_IT) == I2C_XFER_CPLT_IT)
+ {
+ /* Enable STOP interrupts */
+ tmpisr |= I2C_IT_STOPI;
+ }
+ }
+
+ /* Enable interrupts only at the end */
+ /* to avoid the risk of I2C interrupt handle execution before */
+ /* all interrupts requested done */
+ __HAL_I2C_ENABLE_IT(hi2c, tmpisr);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Manage the disabling of Interrupts.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest)
+{
+ uint32_t tmpisr = 0U;
+
+ if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT)
+ {
+ /* Disable TC and TXI interrupts */
+ tmpisr |= I2C_IT_TCI | I2C_IT_TXI;
+
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) != HAL_I2C_STATE_LISTEN)
+ {
+ /* Disable NACK and STOP interrupts */
+ tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+ }
+
+ if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT)
+ {
+ /* Disable TC and RXI interrupts */
+ tmpisr |= I2C_IT_TCI | I2C_IT_RXI;
+
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) != HAL_I2C_STATE_LISTEN)
+ {
+ /* Disable NACK and STOP interrupts */
+ tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+ }
+
+ if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
+ {
+ /* Disable ADDR, NACK and STOP interrupts */
+ tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_ERROR_IT) == I2C_XFER_ERROR_IT)
+ {
+ /* Enable ERR and NACK interrupts */
+ tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_CPLT_IT) == I2C_XFER_CPLT_IT)
+ {
+ /* Enable STOP interrupts */
+ tmpisr |= I2C_IT_STOPI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_RELOAD_IT) == I2C_XFER_RELOAD_IT)
+ {
+ /* Enable TC interrupts */
+ tmpisr |= I2C_IT_TCI;
+ }
+
+ /* Disable interrupts only at the end */
+ /* to avoid a breaking situation like at "t" time */
+ /* all disable interrupts request are not done */
+ __HAL_I2C_DISABLE_IT(hi2c, tmpisr);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c
new file mode 100644
index 00000000..f8f48aa9
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c
@@ -0,0 +1,274 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_i2c_ex.c
+ * @author MCD Application Team
+ * @brief I2C Extended HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of I2C Extended peripheral:
+ * + Extended features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### I2C peripheral Extended features #####
+ ==============================================================================
+
+ [..] Comparing to other previous devices, the I2C interface for STM32F7xx
+ devices contains the following additional features
+
+ (+) Possibility to disable or enable Analog Noise Filter
+ (+) Use of a configured Digital Noise Filter
+ (+) Disable or enable Fast Mode Plus
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..] This driver provides functions to:
+ (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter()
+ (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter()
+ (#) Configure the enable or disable of fast mode plus driving capability using the functions :
+ (++) HAL_I2CEx_EnableFastModePlus()
+ (++) HAL_I2CEx_DisableFastModePlus()
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup I2CEx I2CEx
+ * @brief I2C Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure Noise Filters
+ (+) Configure Fast Mode Plus
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure I2C Analog noise filter.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @param AnalogFilter New state of the Analog filter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Reset I2Cx ANOFF bit */
+ hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF);
+
+ /* Set analog filter bit*/
+ hi2c->Instance->CR1 |= AnalogFilter;
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Configure I2C Digital noise filter.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Get the old register value */
+ tmpreg = hi2c->Instance->CR1;
+
+ /* Reset I2Cx DNF bits [11:8] */
+ tmpreg &= ~(I2C_CR1_DNF);
+
+ /* Set I2Cx DNF coefficient */
+ tmpreg |= DigitalFilter << 8U;
+
+ /* Store the new register value */
+ hi2c->Instance->CR1 = tmpreg;
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+#if (defined(SYSCFG_PMC_I2C_PB6_FMP) || defined(SYSCFG_PMC_I2C_PB7_FMP)) || (defined(SYSCFG_PMC_I2C_PB8_FMP) || defined(SYSCFG_PMC_I2C_PB9_FMP)) || (defined(SYSCFG_PMC_I2C1_FMP)) || (defined(SYSCFG_PMC_I2C2_FMP)) || defined(SYSCFG_PMC_I2C3_FMP) || defined(SYSCFG_PMC_I2C4_FMP)
+/**
+ * @brief Enable the I2C fast mode plus driving capability.
+ * @param ConfigFastModePlus Selects the pin.
+ * This parameter can be one of the @ref I2CEx_FastModePlus values
+ * @note For I2C1, fast mode plus driving capability can be enabled on all selected
+ * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
+ * on each one of the following pins PB6, PB7, PB8 and PB9.
+ * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
+ * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
+ * @note For all I2C2 pins fast mode plus driving capability can be enabled
+ * only by using I2C_FASTMODEPLUS_I2C2 parameter.
+ * @note For all I2C3 pins fast mode plus driving capability can be enabled
+ * only by using I2C_FASTMODEPLUS_I2C3 parameter.
+ * @note For all I2C4 pins fast mode plus driving capability can be enabled
+ * only by using I2C_FASTMODEPLUS_I2C4 parameter.
+ * @retval None
+ */
+void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ /* Check the parameter */
+ assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
+
+ /* Enable SYSCFG clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Enable fast mode plus driving capability for selected pin */
+ SET_BIT(SYSCFG->PMC, (uint32_t)ConfigFastModePlus);
+}
+
+/**
+ * @brief Disable the I2C fast mode plus driving capability.
+ * @param ConfigFastModePlus Selects the pin.
+ * This parameter can be one of the @ref I2CEx_FastModePlus values
+ * @note For I2C1, fast mode plus driving capability can be disabled on all selected
+ * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
+ * on each one of the following pins PB6, PB7, PB8 and PB9.
+ * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
+ * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
+ * @note For all I2C2 pins fast mode plus driving capability can be disabled
+ * only by using I2C_FASTMODEPLUS_I2C2 parameter.
+ * @note For all I2C3 pins fast mode plus driving capability can be disabled
+ * only by using I2C_FASTMODEPLUS_I2C3 parameter.
+ * @note For all I2C4 pins fast mode plus driving capability can be disabled
+ * only by using I2C_FASTMODEPLUS_I2C4 parameter.
+ * @retval None
+ */
+void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ /* Check the parameter */
+ assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
+
+ /* Enable SYSCFG clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Disable fast mode plus driving capability for selected pin */
+ CLEAR_BIT(SYSCFG->PMC, (uint32_t)ConfigFastModePlus);
+}
+
+#endif
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c
new file mode 100644
index 00000000..17c4e923
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c
@@ -0,0 +1,615 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_pwr.c
+ * @author MCD Application Team
+ * @brief PWR HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Power Controller (PWR) peripheral:
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PWR PWR
+ * @brief PWR HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup PWR_Private_Constants
+ * @{
+ */
+
+/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask
+ * @{
+ */
+#define PVD_MODE_IT ((uint32_t)0x00010000U)
+#define PVD_MODE_EVT ((uint32_t)0x00020000U)
+#define PVD_RISING_EDGE ((uint32_t)0x00000001U)
+#define PVD_FALLING_EDGE ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_ENABLE_WUP_Mask PWR Enable WUP Mask
+ * @{
+ */
+#define PWR_EWUP_MASK ((uint32_t)0x00003F00)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ After reset, the backup domain (RTC registers, RTC backup data
+ registers and backup SRAM) is protected against possible unwanted
+ write accesses.
+ To enable access to the RTC Domain and RTC registers, proceed as follows:
+ (+) Enable the Power Controller (PWR) APB1 interface clock using the
+ __HAL_RCC_PWR_CLK_ENABLE() macro.
+ (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the HAL PWR peripheral registers to their default reset values.
+ * @retval None
+ */
+void HAL_PWR_DeInit(void)
+{
+ __HAL_RCC_PWR_FORCE_RESET();
+ __HAL_RCC_PWR_RELEASE_RESET();
+}
+
+/**
+ * @brief Enables access to the backup domain (RTC registers, RTC
+ * backup data registers and backup SRAM).
+ * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
+ * Backup Domain Access should be kept enabled.
+ * @retval None
+ */
+void HAL_PWR_EnableBkUpAccess(void)
+{
+ /* Enable access to RTC and backup registers */
+ SET_BIT(PWR->CR1, PWR_CR1_DBP);
+}
+
+/**
+ * @brief Disables access to the backup domain (RTC registers, RTC
+ * backup data registers and backup SRAM).
+ * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
+ * Backup Domain Access should be kept enabled.
+ * @retval None
+ */
+void HAL_PWR_DisableBkUpAccess(void)
+{
+ /* Disable access to RTC and backup registers */
+ CLEAR_BIT(PWR->CR1, PWR_CR1_DBP);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @brief Low Power modes configuration functions
+ *
+@verbatim
+
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+
+ *** PVD configuration ***
+ =========================
+ [..]
+ (+) The PVD is used to monitor the VDD power supply by comparing it to a
+ threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
+ (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
+ than the PVD threshold. This event is internally connected to the EXTI
+ line16 and can generate an interrupt if enabled. This is done through
+ __HAL_PWR_PVD_EXTI_ENABLE_IT() macro.
+ (+) The PVD is stopped in Standby mode.
+
+ *** Wake-up pin configuration ***
+ ================================
+ [..]
+ (+) Wake-up pin is used to wake up the system from Standby mode. This pin is
+ forced in input pull-down configuration and is active on rising edges.
+ (+) There are up to 6 Wake-up pin in the STM32F7 devices family
+
+ *** Low Power modes configuration ***
+ =====================================
+ [..]
+ The devices feature 3 low-power modes:
+ (+) Sleep mode: Cortex-M7 core stopped, peripherals kept running.
+ (+) Stop mode: all clocks are stopped, regulator running, regulator
+ in low power mode
+ (+) Standby mode: 1.2V domain powered off.
+
+ *** Sleep mode ***
+ ==================
+ [..]
+ (+) Entry:
+ The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI)
+ functions with
+ (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+ (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+
+ -@@- The Regulator parameter is not used for the STM32F7 family
+ and is kept as parameter just to maintain compatibility with the
+ lower power families (STM32L).
+ (+) Exit:
+ Any peripheral interrupt acknowledged by the nested vectored interrupt
+ controller (NVIC) can wake up the device from Sleep mode.
+
+ *** Stop mode ***
+ =================
+ [..]
+ In Stop mode, all clocks in the 1.2V domain are stopped, the PLL, the HSI,
+ and the HSE RC oscillators are disabled. Internal SRAM and register contents
+ are preserved.
+ The voltage regulator can be configured either in normal or low-power mode.
+ To minimize the consumption In Stop mode, FLASH can be powered off before
+ entering the Stop mode using the HAL_PWREx_EnableFlashPowerDown() function.
+ It can be switched on again by software after exiting the Stop mode using
+ the HAL_PWREx_DisableFlashPowerDown() function.
+
+ (+) Entry:
+ The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON)
+ function with:
+ (++) Main regulator ON.
+ (++) Low Power regulator ON.
+ (+) Exit:
+ Any EXTI Line (Internal or External) configured in Interrupt/Event mode.
+
+ *** Standby mode ***
+ ====================
+ [..]
+ (+)
+ The Standby mode allows to achieve the lowest power consumption. It is based
+ on the Cortex-M7 deep sleep mode, with the voltage regulator disabled.
+ The 1.2V domain is consequently powered off. The PLL, the HSI oscillator and
+ the HSE oscillator are also switched off. SRAM and register contents are lost
+ except for the RTC registers, RTC backup registers, backup SRAM and Standby
+ circuitry.
+
+ The voltage regulator is OFF.
+
+ (++) Entry:
+ (+++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function.
+ (++) Exit:
+ (+++) WKUP pin rising or falling edge, RTC alarm (Alarm A and Alarm B), RTC
+ wakeup, tamper event, time stamp event, external reset in NRST pin, IWDG reset.
+
+ *** Auto-wakeup (AWU) from low-power mode ***
+ =============================================
+ [..]
+
+ (+) The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC
+ Wakeup event, a tamper event or a time-stamp event, without depending on
+ an external interrupt (Auto-wakeup mode).
+
+ (+) RTC auto-wakeup (AWU) from the Stop and Standby modes
+
+ (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to
+ configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function.
+
+ (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it
+ is necessary to configure the RTC to detect the tamper or time stamp event using the
+ HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions.
+
+ (++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to
+ configure the RTC to generate the RTC WakeUp event using the HAL_RTCEx_SetWakeUpTimer_IT() function.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
+ * @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration
+ * information for the PVD.
+ * @note Refer to the electrical characteristics of your device datasheet for
+ * more details about the voltage threshold corresponding to each
+ * detection level.
+ * @retval None
+ */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
+ assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
+
+ /* Set PLS[7:5] bits according to PVDLevel value */
+ MODIFY_REG(PWR->CR1, PWR_CR1_PLS, sConfigPVD->PVDLevel);
+
+ /* Clear any previous config. Keep it clear if no event or IT mode is selected */
+ __HAL_PWR_PVD_EXTI_DISABLE_EVENT();
+ __HAL_PWR_PVD_EXTI_DISABLE_IT();
+ __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();
+ __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+ /* Configure interrupt mode */
+ if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_IT();
+ }
+
+ /* Configure event mode */
+ if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_EVENT();
+ }
+
+ /* Configure the edge */
+ if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
+ }
+
+ if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+ }
+}
+
+/**
+ * @brief Enables the Power Voltage Detector(PVD).
+ * @retval None
+ */
+void HAL_PWR_EnablePVD(void)
+{
+ /* Enable the power voltage detector */
+ SET_BIT(PWR->CR1, PWR_CR1_PVDE);
+}
+
+/**
+ * @brief Disables the Power Voltage Detector(PVD).
+ * @retval None
+ */
+void HAL_PWR_DisablePVD(void)
+{
+ /* Disable the power voltage detector */
+ CLEAR_BIT(PWR->CR1, PWR_CR1_PVDE);
+}
+
+/**
+ * @brief Enable the WakeUp PINx functionality.
+ * @param WakeUpPinPolarity Specifies which Wake-Up pin to enable.
+ * This parameter can be one of the following legacy values, which sets the default polarity:
+ * detection on high level (rising edge):
+ * @arg PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5, PWR_WAKEUP_PIN6
+ * or one of the following value where the user can explicitly states the enabled pin and
+ * the chosen polarity
+ * @arg PWR_WAKEUP_PIN1_HIGH or PWR_WAKEUP_PIN1_LOW
+ * @arg PWR_WAKEUP_PIN2_HIGH or PWR_WAKEUP_PIN2_LOW
+ * @arg PWR_WAKEUP_PIN3_HIGH or PWR_WAKEUP_PIN3_LOW
+ * @arg PWR_WAKEUP_PIN4_HIGH or PWR_WAKEUP_PIN4_LOW
+ * @arg PWR_WAKEUP_PIN5_HIGH or PWR_WAKEUP_PIN5_LOW
+ * @arg PWR_WAKEUP_PIN6_HIGH or PWR_WAKEUP_PIN6_LOW
+ * @note PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent.
+ * @retval None
+ */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity)
+{
+ assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity));
+
+ /* Enable wake-up pin */
+ SET_BIT(PWR->CSR2, (PWR_EWUP_MASK & WakeUpPinPolarity));
+
+ /* Specifies the Wake-Up pin polarity for the event detection
+ (rising or falling edge) */
+ MODIFY_REG(PWR->CR2, (PWR_EWUP_MASK & WakeUpPinPolarity), (WakeUpPinPolarity >> 0x06));
+}
+
+/**
+ * @brief Disables the WakeUp PINx functionality.
+ * @param WakeUpPinx Specifies the Power Wake-Up pin to disable.
+ * This parameter can be one of the following values:
+ * @arg PWR_WAKEUP_PIN1
+ * @arg PWR_WAKEUP_PIN2
+ * @arg PWR_WAKEUP_PIN3
+ * @arg PWR_WAKEUP_PIN4
+ * @arg PWR_WAKEUP_PIN5
+ * @arg PWR_WAKEUP_PIN6
+ * @retval None
+ */
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
+{
+ assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+
+ CLEAR_BIT(PWR->CSR2, WakeUpPinx);
+}
+
+/**
+ * @brief Enters Sleep mode.
+ *
+ * @note In Sleep mode, all I/O pins keep the same state as in Run mode.
+ *
+ * @note In Sleep mode, the systick is stopped to avoid exit from this mode with
+ * systick interrupt when used as time base for Timeout
+ *
+ * @param Regulator Specifies the regulator state in SLEEP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON
+ * @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON
+ * @note This parameter is not used for the STM32F7 family and is kept as parameter
+ * just to maintain compatibility with the lower power families.
+ * @param SLEEPEntry Specifies if SLEEP mode in entered with WFI or WFE instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+ * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+ * @retval None
+ */
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR(Regulator));
+ assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
+
+ /* Clear SLEEPDEEP bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+
+ /* Ensure that all instructions done before entering SLEEP mode */
+ __DSB();
+ __ISB();
+
+ /* Select SLEEP mode entry -------------------------------------------------*/
+ if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __SEV();
+ __WFE();
+ __WFE();
+ }
+}
+
+/**
+ * @brief Enters Stop mode.
+ * @note In Stop mode, all I/O pins keep the same state as in Run mode.
+ * @note When exiting Stop mode by issuing an interrupt or a wakeup event,
+ * the HSI RC oscillator is selected as system clock.
+ * @note When the voltage regulator operates in low power mode, an additional
+ * startup delay is incurred when waking up from Stop mode.
+ * By keeping the internal regulator ON during Stop mode, the consumption
+ * is higher although the startup time is reduced.
+ * @param Regulator Specifies the regulator state in Stop mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON
+ * @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON
+ * @param STOPEntry Specifies if Stop mode in entered with WFI or WFE instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction
+ * @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction
+ * @retval None
+ */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR(Regulator));
+ assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+
+ /* Select the regulator state in Stop mode ---------------------------------*/
+ tmpreg = PWR->CR1;
+ /* Clear PDDS and LPDS bits */
+ tmpreg &= (uint32_t)~(PWR_CR1_PDDS | PWR_CR1_LPDS);
+
+ /* Set LPDS, MRLVDS and LPLVDS bits according to Regulator value */
+ tmpreg |= Regulator;
+
+ /* Store the new value */
+ PWR->CR1 = tmpreg;
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+ /* Ensure that all instructions done before entering STOP mode */
+ __DSB();
+ __ISB();
+
+ /* Select Stop mode entry --------------------------------------------------*/
+ if(STOPEntry == PWR_STOPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __SEV();
+ __WFE();
+ __WFE();
+ }
+ /* Reset SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
+}
+
+/**
+ * @brief Enters Standby mode.
+ * @note In Standby mode, all I/O pins are high impedance except for:
+ * - Reset pad (still available)
+ * - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC
+ * Alarm out, or RTC clock calibration out.
+ * - RTC_AF2 pin (PI8) if configured for tamper or time-stamp.
+ * - WKUP pins if enabled.
+ * @retval None
+ */
+void HAL_PWR_EnterSTANDBYMode(void)
+{
+ /* Select Standby mode */
+ PWR->CR1 |= PWR_CR1_PDDS;
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+ /* This option is used to ensure that store operations are completed */
+#if defined ( __CC_ARM)
+ __force_stores();
+#endif
+ /* Request Wait For Interrupt */
+ __WFI();
+}
+
+/**
+ * @brief This function handles the PWR PVD interrupt request.
+ * @note This API should be called under the PVD_IRQHandler().
+ * @retval None
+ */
+void HAL_PWR_PVD_IRQHandler(void)
+{
+ /* Check PWR Exti flag */
+ if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
+ {
+ /* PWR PVD interrupt user callback */
+ HAL_PWR_PVDCallback();
+
+ /* Clear PWR Exti pending bit */
+ __HAL_PWR_PVD_EXTI_CLEAR_FLAG();
+ }
+}
+
+/**
+ * @brief PWR PVD interrupt callback
+ * @retval None
+ */
+__weak void HAL_PWR_PVDCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PWR_PVDCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode.
+ * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+ * re-enters SLEEP mode when an interruption handling is over.
+ * Setting this bit is useful when the processor is expected to run only on
+ * interruptions handling.
+ * @retval None
+ */
+void HAL_PWR_EnableSleepOnExit(void)
+{
+ /* Set SLEEPONEXIT bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+ * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode.
+ * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+ * re-enters SLEEP mode when an interruption handling is over.
+ * @retval None
+ */
+void HAL_PWR_DisableSleepOnExit(void)
+{
+ /* Clear SLEEPONEXIT bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+ * @brief Enables CORTEX M4 SEVONPEND bit.
+ * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes
+ * WFE to wake up when an interrupt moves from inactive to pended.
+ * @retval None
+ */
+void HAL_PWR_EnableSEVOnPend(void)
+{
+ /* Set SEVONPEND bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+ * @brief Disables CORTEX M4 SEVONPEND bit.
+ * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes
+ * WFE to wake up when an interrupt moves from inactive to pended.
+ * @retval None
+ */
+void HAL_PWR_DisableSEVOnPend(void)
+{
+ /* Clear SEVONPEND bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c
new file mode 100644
index 00000000..663fa1e7
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c
@@ -0,0 +1,570 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_pwr_ex.c
+ * @author MCD Application Team
+ * @brief Extended PWR HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of PWR extension peripheral:
+ * + Peripheral Extended features functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PWREx PWREx
+ * @brief PWR HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup PWREx_Private_Constants
+ * @{
+ */
+#define PWR_OVERDRIVE_TIMEOUT_VALUE 1000
+#define PWR_UDERDRIVE_TIMEOUT_VALUE 1000
+#define PWR_BKPREG_TIMEOUT_VALUE 1000
+#define PWR_VOSRDY_TIMEOUT_VALUE 1000
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Functions PWREx Exported Functions
+ * @{
+ */
+
+/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended features functions
+ * @brief Peripheral Extended features functions
+ *
+@verbatim
+
+ ===============================================================================
+ ##### Peripheral extended features functions #####
+ ===============================================================================
+
+ *** Main and Backup Regulators configuration ***
+ ================================================
+ [..]
+ (+) The backup domain includes 4 Kbytes of backup SRAM accessible only from
+ the CPU, and address in 32-bit, 16-bit or 8-bit mode. Its content is
+ retained even in Standby or VBAT mode when the low power backup regulator
+ is enabled. It can be considered as an internal EEPROM when VBAT is
+ always present. You can use the HAL_PWREx_EnableBkUpReg() function to
+ enable the low power backup regulator.
+
+ (+) When the backup domain is supplied by VDD (analog switch connected to VDD)
+ the backup SRAM is powered from VDD which replaces the VBAT power supply to
+ save battery life.
+
+ (+) The backup SRAM is not mass erased by a tamper event. It is read
+ protected to prevent confidential data, such as cryptographic private
+ key, from being accessed. The backup SRAM can be erased only through
+ the Flash interface when a protection level change from level 1 to
+ level 0 is requested.
+ -@- Refer to the description of Read protection (RDP) in the Flash
+ programming manual.
+
+ (+) The main internal regulator can be configured to have a tradeoff between
+ performance and power consumption when the device does not operate at
+ the maximum frequency. This is done through __HAL_PWR_MAINREGULATORMODE_CONFIG()
+ macro which configure VOS bit in PWR_CR register
+
+ Refer to the product datasheets for more details.
+
+ *** FLASH Power Down configuration ****
+ =======================================
+ [..]
+ (+) By setting the FPDS bit in the PWR_CR register by using the
+ HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters power
+ down mode when the device enters Stop mode. When the Flash memory
+ is in power down mode, an additional startup delay is incurred when
+ waking up from Stop mode.
+
+ *** Over-Drive and Under-Drive configuration ****
+ =================================================
+ [..]
+ (+) In Run mode: the main regulator has 2 operating modes available:
+ (++) Normal mode: The CPU and core logic operate at maximum frequency at a given
+ voltage scaling (scale 1, scale 2 or scale 3)
+ (++) Over-drive mode: This mode allows the CPU and the core logic to operate at a
+ higher frequency than the normal mode for a given voltage scaling (scale 1,
+ scale 2 or scale 3). This mode is enabled through HAL_PWREx_EnableOverDrive() function and
+ disabled by HAL_PWREx_DisableOverDrive() function, to enter or exit from Over-drive mode please follow
+ the sequence described in Reference manual.
+
+ (+) In Stop mode: the main regulator or low power regulator supplies a low power
+ voltage to the 1.2V domain, thus preserving the content of registers
+ and internal SRAM. 2 operating modes are available:
+ (++) Normal mode: the 1.2V domain is preserved in nominal leakage mode. This mode is only
+ available when the main regulator or the low power regulator is used in Scale 3 or
+ low voltage mode.
+ (++) Under-drive mode: the 1.2V domain is preserved in reduced leakage mode. This mode is only
+ available when the main regulator or the low power regulator is in low voltage mode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables the Backup Regulator.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void)
+{
+ uint32_t tickstart = 0;
+
+ /* Enable Backup regulator */
+ PWR->CSR1 |= PWR_CSR1_BRE;
+
+ /* Workaround for the following hardware bug: */
+ /* Id 19: PWR : No STANDBY wake-up when Back-up RAM enabled (ref. Errata Sheet p23) */
+ PWR->CSR1 |= PWR_CSR1_EIWUP;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till Backup regulator ready flag is set */
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables the Backup Regulator.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void)
+{
+ uint32_t tickstart = 0;
+
+ /* Disable Backup regulator */
+ PWR->CSR1 &= (uint32_t)~((uint32_t)PWR_CSR1_BRE);
+
+ /* Workaround for the following hardware bug: */
+ /* Id 19: PWR : No STANDBY wake-up when Back-up RAM enabled (ref. Errata Sheet p23) */
+ PWR->CSR1 |= PWR_CSR1_EIWUP;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till Backup regulator ready flag is set */
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the Flash Power Down in Stop mode.
+ * @retval None
+ */
+void HAL_PWREx_EnableFlashPowerDown(void)
+{
+ /* Enable the Flash Power Down */
+ PWR->CR1 |= PWR_CR1_FPDS;
+}
+
+/**
+ * @brief Disables the Flash Power Down in Stop mode.
+ * @retval None
+ */
+void HAL_PWREx_DisableFlashPowerDown(void)
+{
+ /* Disable the Flash Power Down */
+ PWR->CR1 &= (uint32_t)~((uint32_t)PWR_CR1_FPDS);
+}
+
+/**
+ * @brief Enables Main Regulator low voltage mode.
+ * @retval None
+ */
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void)
+{
+ /* Enable Main regulator low voltage */
+ PWR->CR1 |= PWR_CR1_MRUDS;
+}
+
+/**
+ * @brief Disables Main Regulator low voltage mode.
+ * @retval None
+ */
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void)
+{
+ /* Disable Main regulator low voltage */
+ PWR->CR1 &= (uint32_t)~((uint32_t)PWR_CR1_MRUDS);
+}
+
+/**
+ * @brief Enables Low Power Regulator low voltage mode.
+ * @retval None
+ */
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void)
+{
+ /* Enable low power regulator */
+ PWR->CR1 |= PWR_CR1_LPUDS;
+}
+
+/**
+ * @brief Disables Low Power Regulator low voltage mode.
+ * @retval None
+ */
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void)
+{
+ /* Disable low power regulator */
+ PWR->CR1 &= (uint32_t)~((uint32_t)PWR_CR1_LPUDS);
+}
+
+/**
+ * @brief Activates the Over-Drive mode.
+ * @note This mode allows the CPU and the core logic to operate at a higher frequency
+ * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).
+ * @note It is recommended to enter or exit Over-drive mode when the application is not running
+ * critical tasks and when the system clock source is either HSI or HSE.
+ * During the Over-drive switch activation, no peripheral clocks should be enabled.
+ * The peripheral clocks must be enabled once the Over-drive mode is activated.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void)
+{
+ uint32_t tickstart = 0;
+
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable the Over-drive to extend the clock frequency to 216 MHz */
+ __HAL_PWR_OVERDRIVE_ENABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Enable the Over-drive switch */
+ __HAL_PWR_OVERDRIVESWITCHING_ENABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivates the Over-Drive mode.
+ * @note This mode allows the CPU and the core logic to operate at a higher frequency
+ * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).
+ * @note It is recommended to enter or exit Over-drive mode when the application is not running
+ * critical tasks and when the system clock source is either HSI or HSE.
+ * During the Over-drive switch activation, no peripheral clocks should be enabled.
+ * The peripheral clocks must be enabled once the Over-drive mode is activated.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void)
+{
+ uint32_t tickstart = 0;
+
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Disable the Over-drive switch */
+ __HAL_PWR_OVERDRIVESWITCHING_DISABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Disable the Over-drive */
+ __HAL_PWR_OVERDRIVE_DISABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enters in Under-Drive STOP mode.
+ *
+ * @note This mode can be selected only when the Under-Drive is already active
+ *
+ * @note This mode is enabled only with STOP low power mode.
+ * In this mode, the 1.2V domain is preserved in reduced leakage mode. This
+ * mode is only available when the main regulator or the low power regulator
+ * is in low voltage mode
+ *
+ * @note If the Under-drive mode was enabled, it is automatically disabled after
+ * exiting Stop mode.
+ * When the voltage regulator operates in Under-drive mode, an additional
+ * startup delay is induced when waking up from Stop mode.
+ *
+ * @note In Stop mode, all I/O pins keep the same state as in Run mode.
+ *
+ * @note When exiting Stop mode by issuing an interrupt or a wakeup event,
+ * the HSI RC oscillator is selected as system clock.
+ *
+ * @note When the voltage regulator operates in low power mode, an additional
+ * startup delay is incurred when waking up from Stop mode.
+ * By keeping the internal regulator ON during Stop mode, the consumption
+ * is higher although the startup time is reduced.
+ *
+ * @param Regulator specifies the regulator state in STOP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_UNDERDRIVE_ON: Main Regulator in under-drive mode
+ * and Flash memory in power-down when the device is in Stop under-drive mode
+ * @arg PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON: Low Power Regulator in under-drive mode
+ * and Flash memory in power-down when the device is in Stop under-drive mode
+ * @param STOPEntry specifies if STOP mode in entered with WFI or WFE instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction
+ * @arg PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+ uint32_t tempreg = 0;
+ uint32_t tickstart = 0;
+
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR_UNDERDRIVE(Regulator));
+ assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+
+ /* Enable Power ctrl clock */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ /* Enable the Under-drive Mode ---------------------------------------------*/
+ /* Clear Under-drive flag */
+ __HAL_PWR_CLEAR_ODRUDR_FLAG();
+
+ /* Enable the Under-drive */
+ __HAL_PWR_UNDERDRIVE_ENABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait for UnderDrive mode is ready */
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_UDRDY))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_UDERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Select the regulator state in STOP mode ---------------------------------*/
+ tempreg = PWR->CR1;
+ /* Clear PDDS, LPDS, MRLUDS and LPLUDS bits */
+ tempreg &= (uint32_t)~(PWR_CR1_PDDS | PWR_CR1_LPDS | PWR_CR1_LPUDS | PWR_CR1_MRUDS);
+
+ /* Set LPDS, MRLUDS and LPLUDS bits according to PWR_Regulator value */
+ tempreg |= Regulator;
+
+ /* Store the new value */
+ PWR->CR1 = tempreg;
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+ /* Select STOP mode entry --------------------------------------------------*/
+ if(STOPEntry == PWR_SLEEPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __WFE();
+ }
+ /* Reset SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns Voltage Scaling Range.
+ * @retval VOS bit field (PWR_REGULATOR_VOLTAGE_SCALE1, PWR_REGULATOR_VOLTAGE_SCALE2 or
+ * PWR_REGULATOR_VOLTAGE_SCALE3)PWR_REGULATOR_VOLTAGE_SCALE1
+ */
+uint32_t HAL_PWREx_GetVoltageRange(void)
+{
+ return (PWR->CR1 & PWR_CR1_VOS);
+}
+
+/**
+ * @brief Configures the main internal regulator output voltage.
+ * @param VoltageScaling specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power consumption.
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode,
+ * typical output voltage at 1.4 V,
+ * system frequency up to 216 MHz.
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode,
+ * typical output voltage at 1.2 V,
+ * system frequency up to 180 MHz.
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output range 2 mode,
+ * typical output voltage at 1.00 V,
+ * system frequency up to 151 MHz.
+ * @note To update the system clock frequency(SYSCLK):
+ * - Set the HSI or HSE as system clock frequency using the HAL_RCC_ClockConfig().
+ * - Call the HAL_RCC_OscConfig() to configure the PLL.
+ * - Call HAL_PWREx_ConfigVoltageScaling() API to adjust the voltage scale.
+ * - Set the new system clock frequency using the HAL_RCC_ClockConfig().
+ * @note The scale can be modified only when the HSI or HSE clock source is selected
+ * as system clock source, otherwise the API returns HAL_ERROR.
+ * @note When the PLL is OFF, the voltage scale 3 is automatically selected and the VOS bits
+ * value in the PWR_CR1 register are not taken in account.
+ * @note This API forces the PLL state ON to allow the possibility to configure the voltage scale 1 or 2.
+ * @note The new voltage scale is active only when the PLL is ON.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling)
+{
+ uint32_t tickstart = 0;
+
+ assert_param(IS_PWR_REGULATOR_VOLTAGE(VoltageScaling));
+
+ /* Enable Power ctrl clock */
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Check if the PLL is used as system clock or not */
+ if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
+ {
+ /* Disable the main PLL */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLL is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set Range */
+ __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling);
+
+ /* Enable the main PLL */
+ __HAL_RCC_PLL_ENABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+ while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c
new file mode 100644
index 00000000..bde60779
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c
@@ -0,0 +1,1237 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_rcc.c
+ * @author MCD Application Team
+ * @brief RCC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Reset and Clock Control (RCC) peripheral:
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### RCC specific features #####
+ ==============================================================================
+ [..]
+ After reset the device is running from Internal High Speed oscillator
+ (HSI 16MHz) with Flash 0 wait state, Flash prefetch buffer, D-Cache
+ and I-Cache are disabled, and all peripherals are off except internal
+ SRAM, Flash and JTAG.
+ (+) There is no prescaler on High speed (AHB) and Low speed (APB) busses;
+ all peripherals mapped on these busses are running at HSI speed.
+ (+) The clock for all peripherals is switched off, except the SRAM and FLASH.
+ (+) All GPIOs are in input floating state, except the JTAG pins which
+ are assigned to be used for debug purpose.
+
+ [..]
+ Once the device started from reset, the user application has to:
+ (+) Configure the clock source to be used to drive the System clock
+ (if the application needs higher frequency/performance)
+ (+) Configure the System clock frequency and Flash settings
+ (+) Configure the AHB and APB busses prescalers
+ (+) Enable the clock for the peripheral(s) to be used
+ (+) Configure the clock source(s) for peripherals which clocks are not
+ derived from the System clock (I2S, RTC, ADC, USB OTG FS/SDIO/RNG)
+
+ ##### RCC Limitations #####
+ ==============================================================================
+ [..]
+ A delay between an RCC peripheral clock enable and the effective peripheral
+ enabling should be taken into account in order to manage the peripheral read/write
+ from/to registers.
+ (+) This delay depends on the peripheral mapping.
+ (+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle
+ after the clock enable bit is set on the hardware register
+ (+) If peripheral is mapped on APB: the delay is 2 APB clock cycle
+ after the clock enable bit is set on the hardware register
+
+ [..]
+ Implemented Workaround:
+ (+) For AHB & APB peripherals, a dummy read to the peripheral register has been
+ inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RCC RCC
+ * @brief RCC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup RCC_Private_Macros RCC Private Macros
+ * @{
+ */
+
+#define MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
+#define MCO1_GPIO_PORT GPIOA
+#define MCO1_PIN GPIO_PIN_8
+
+#define MCO2_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
+#define MCO2_GPIO_PORT GPIOC
+#define MCO2_PIN GPIO_PIN_9
+
+/**
+ * @}
+ */
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup RCC_Private_Variables RCC Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Functions RCC Exported Functions
+ * @{
+ */
+
+/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ===============================================================================
+##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ This section provides functions allowing to configure the internal/external oscillators
+ (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System buses clocks (SYSCLK, AHB, APB1
+ and APB2).
+
+ [..] Internal/external clock and PLL configuration
+ (#) HSI (high-speed internal), 16 MHz factory-trimmed RC used directly or through
+ the PLL as System clock source.
+
+ (#) LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC
+ clock source.
+
+ (#) HSE (high-speed external), 4 to 26 MHz crystal oscillator used directly or
+ through the PLL as System clock source. Can be used also as RTC clock source.
+
+ (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source.
+
+ (#) PLL (clocked by HSI or HSE), featuring two different output clocks:
+ (++) The first output is used to generate the high speed system clock (up to 216 MHz)
+ (++) The second output is used to generate the clock for the USB OTG FS (48 MHz),
+ the random analog generator (<=48 MHz) and the SDIO (<= 48 MHz).
+
+ (#) CSS (Clock security system), once enable using the function HAL_RCC_EnableCSS()
+ and if a HSE clock failure occurs(HSE used directly or through PLL as System
+ clock source), the System clock is automatically switched to HSI and an interrupt
+ is generated if enabled. The interrupt is linked to the Cortex-M7 NMI
+ (Non-Maskable Interrupt) exception vector.
+
+ (#) MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL
+ clock (through a configurable prescaler) on PA8 pin.
+
+ (#) MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or PLLI2S
+ clock (through a configurable prescaler) on PC9 pin.
+
+ [..] System, AHB and APB busses clocks configuration
+ (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI,
+ HSE and PLL.
+ The AHB clock (HCLK) is derived from System clock through configurable
+ prescaler and used to clock the CPU, memory and peripherals mapped
+ on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived
+ from AHB clock through configurable prescalers and used to clock
+ the peripherals mapped on these busses. You can use
+ "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks.
+
+ -@- All the peripheral clocks are derived from the System clock (SYSCLK) except:
+ (+@) I2S: the I2S clock can be derived either from a specific PLL (PLLI2S) or
+ from an external clock mapped on the I2S_CKIN pin.
+ You have to use __HAL_RCC_PLLI2S_CONFIG() macro to configure this clock.
+ (+@) SAI: the SAI clock can be derived either from a specific PLL (PLLI2S) or (PLLSAI) or
+ from an external clock mapped on the I2S_CKIN pin.
+ You have to use __HAL_RCC_PLLI2S_CONFIG() macro to configure this clock.
+ (+@) RTC: the RTC clock can be derived either from the LSI, LSE or HSE clock
+ divided by 2 to 31. You have to use __HAL_RCC_RTC_CONFIG() and __HAL_RCC_RTC_ENABLE()
+ macros to configure this clock.
+ (+@) USB OTG FS, SDIO and RTC: USB OTG FS require a frequency equal to 48 MHz
+ to work correctly, while the SDIO require a frequency equal or lower than
+ to 48. This clock is derived of the main PLL through PLLQ divider.
+ (+@) IWDG clock which is always the LSI clock.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Resets the RCC clock configuration to the default reset state.
+ * @note The default reset state of the clock configuration is given below:
+ * - HSI ON and used as system clock source
+ * - HSE, PLL, PLLI2S and PLLSAI OFF
+ * - AHB, APB1 and APB2 prescaler set to 1.
+ * - CSS, MCO1 and MCO2 OFF
+ * - All interrupts disabled
+ * @note This function doesn't modify the configuration of the
+ * - Peripheral clocks
+ * - LSI, LSE and RTC clocks
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_RCC_DeInit(void)
+{
+ uint32_t tickstart;
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Set HSION bit to the reset value */
+ SET_BIT(RCC->CR, RCC_CR_HSION);
+
+ /* Wait till HSI is ready */
+ while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set HSITRIM[4:0] bits to the reset value */
+ SET_BIT(RCC->CR, RCC_CR_HSITRIM_4);
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Reset CFGR register */
+ CLEAR_REG(RCC->CFGR);
+
+ /* Wait till clock switch is ready */
+ while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Clear HSEON, HSEBYP and CSSON bits */
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSEBYP | RCC_CR_CSSON);
+
+ /* Wait till HSE is disabled */
+ while (READ_BIT(RCC->CR, RCC_CR_HSERDY) != RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Clear PLLON bit */
+ CLEAR_BIT(RCC->CR, RCC_CR_PLLON);
+
+ /* Wait till PLL is disabled */
+ while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Reset PLLI2SON bit */
+ CLEAR_BIT(RCC->CR, RCC_CR_PLLI2SON);
+
+ /* Wait till PLLI2S is disabled */
+ while (READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) != RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Reset PLLSAI bit */
+ CLEAR_BIT(RCC->CR, RCC_CR_PLLSAION);
+
+ /* Wait till PLLSAI is disabled */
+ while (READ_BIT(RCC->CR, RCC_CR_PLLSAIRDY) != RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Once PLL, PLLI2S and PLLSAI are OFF, reset PLLCFGR register to default value */
+ RCC->PLLCFGR = RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_2 | 0x20000000U;
+
+ /* Reset PLLI2SCFGR register to default value */
+ RCC->PLLI2SCFGR = RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SR_1;
+
+ /* Reset PLLSAICFGR register to default value */
+ RCC->PLLSAICFGR = RCC_PLLSAICFGR_PLLSAIN_6 | RCC_PLLSAICFGR_PLLSAIN_7 | RCC_PLLSAICFGR_PLLSAIQ_2 | 0x20000000U;
+
+ /* Disable all interrupts */
+ CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE | RCC_CIR_LSERDYIE | RCC_CIR_HSIRDYIE | RCC_CIR_HSERDYIE | RCC_CIR_PLLRDYIE | RCC_CIR_PLLI2SRDYIE | RCC_CIR_PLLSAIRDYIE);
+
+ /* Clear all interrupt flags */
+ SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC | RCC_CIR_LSERDYC | RCC_CIR_HSIRDYC | RCC_CIR_HSERDYC | RCC_CIR_PLLRDYC | RCC_CIR_PLLI2SRDYC | RCC_CIR_PLLSAIRDYC | RCC_CIR_CSSC);
+
+ /* Clear LSION bit */
+ CLEAR_BIT(RCC->CSR, RCC_CSR_LSION);
+
+ /* Reset all CSR flags */
+ SET_BIT(RCC->CSR, RCC_CSR_RMVF);
+
+ /* Update the SystemCoreClock global variable */
+ SystemCoreClock = HSI_VALUE;
+
+ /* Adapt Systick interrupt period */
+ if(HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief Initializes the RCC Oscillators according to the specified parameters in the
+ * RCC_OscInitTypeDef.
+ * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that
+ * contains the configuration information for the RCC Oscillators.
+ * @note The PLL is not disabled when used as system clock.
+ * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not
+ * supported by this function. User should request a transition to LSE Off
+ * first and then LSE On or LSE Bypass.
+ * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not
+ * supported by this function. User should request a transition to HSE Off
+ * first and then HSE On or HSE Bypass.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+{
+ uint32_t tickstart;
+ FlagStatus pwrclkchanged = RESET;
+
+ /* Check Null pointer */
+ if(RCC_OscInitStruct == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
+
+ /*------------------------------- HSE Configuration ------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
+ /* When the HSE is used as system clock or clock source for PLL, It can not be disabled */
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE)
+ || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)))
+ {
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
+ {
+ return HAL_ERROR;
+ }
+ }
+ else
+ {
+ /* Set the new HSE configuration ---------------------------------------*/
+ __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
+
+ /* Check the HSE State */
+ if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF)
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is bypassed or disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*----------------------------- HSI Configuration --------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
+ assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
+
+ /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI)
+ || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)))
+ {
+ /* When HSI is used as system clock it will not disabled */
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
+ {
+ return HAL_ERROR;
+ }
+ /* Otherwise, just the calibration is allowed */
+ else
+ {
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ }
+ else
+ {
+ /* Check the HSI State */
+ if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF)
+ {
+ /* Enable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ else
+ {
+ /* Disable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*------------------------------ LSI Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
+
+ /* Check the LSI State */
+ if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF)
+ {
+ /* Enable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /*------------------------------ LSE Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
+
+ /* Update LSE configuration in Backup Domain control register */
+ /* Requires to enable write access to Backup Domain of necessary */
+ if(__HAL_RCC_PWR_IS_CLK_DISABLED())
+ {
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+ pwrclkchanged = SET;
+ }
+
+ if(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP))
+ {
+ /* Enable write access to Backup domain */
+ PWR->CR1 |= PWR_CR1_DBP;
+
+ /* Wait for Backup domain Write protection disable */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP))
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Set the new LSE configuration -----------------------------------------*/
+ __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
+ /* Check the LSE State */
+ if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF)
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Restore clock configuration if changed */
+ if(pwrclkchanged == SET)
+ {
+ __HAL_RCC_PWR_CLK_DISABLE();
+ }
+ }
+ /*-------------------------------- PLL Configuration -----------------------*/
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
+ if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
+ {
+ /* Check if the PLL is used as system clock or not */
+ if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+ {
+ if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
+ assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM));
+ assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN));
+ assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP));
+ assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ));
+#if defined (RCC_PLLCFGR_PLLR)
+ assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR));
+#endif
+
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Configure the main PLL clock source, multiplication and division factors. */
+#if defined (RCC_PLLCFGR_PLLR)
+ __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
+ RCC_OscInitStruct->PLL.PLLM,
+ RCC_OscInitStruct->PLL.PLLN,
+ RCC_OscInitStruct->PLL.PLLP,
+ RCC_OscInitStruct->PLL.PLLQ,
+ RCC_OscInitStruct->PLL.PLLR);
+#else
+ __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
+ RCC_OscInitStruct->PLL.PLLM,
+ RCC_OscInitStruct->PLL.PLLN,
+ RCC_OscInitStruct->PLL.PLLP,
+ RCC_OscInitStruct->PLL.PLLQ);
+#endif
+
+ /* Enable the main PLL. */
+ __HAL_RCC_PLL_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CPU, AHB and APB busses clocks according to the specified
+ * parameters in the RCC_ClkInitStruct.
+ * @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that
+ * contains the configuration information for the RCC peripheral.
+ * @param FLatency FLASH Latency, this parameter depend on device selected
+ *
+ * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
+ * and updated by HAL_RCC_GetHCLKFreq() function called within this function
+ *
+ * @note The HSI is used (enabled by hardware) as system clock source after
+ * startup from Reset, wake-up from STOP and STANDBY mode, or in case
+ * of failure of the HSE used directly or indirectly as system clock
+ * (if the Clock Security System CSS is enabled).
+ *
+ * @note A switch from one clock source to another occurs only if the target
+ * clock source is ready (clock stable after startup delay or PLL locked).
+ * If a clock source which is not yet ready is selected, the switch will
+ * occur when the clock source will be ready.
+ * You can use HAL_RCC_GetClockConfig() function to know which clock is
+ * currently used as system clock source.
+ * @note Depending on the device voltage range, the software has to set correctly
+ * HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency
+ * (for more details refer to section above "Initialization/de-initialization functions")
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency)
+{
+ uint32_t tickstart = 0;
+
+ /* Check Null pointer */
+ if(RCC_ClkInitStruct == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType));
+ assert_param(IS_FLASH_LATENCY(FLatency));
+
+ /* To correctly read data from FLASH memory, the number of wait states (LATENCY)
+ must be correctly programmed according to the frequency of the CPU clock
+ (HCLK) and the supply voltage of the device. */
+
+ /* Increasing the CPU frequency */
+ if(FLatency > __HAL_FLASH_GET_LATENCY())
+ {
+ /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+ __HAL_FLASH_SET_LATENCY(FLatency);
+
+ /* Check that the new number of wait states is taken into account to access the Flash
+ memory by reading the FLASH_ACR register */
+ if(__HAL_FLASH_GET_LATENCY() != FLatency)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /*-------------------------- HCLK Configuration --------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
+ {
+ /* Set the highest APBx dividers in order to ensure that we do not go through
+ a non-spec phase whatever we decrease or increase HCLK. */
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
+ {
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_HCLK_DIV16);
+ }
+
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
+ {
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, (RCC_HCLK_DIV16 << 3));
+ }
+
+ /* Set the new HCLK clock divider */
+ assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
+ }
+
+ /*------------------------- SYSCLK Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
+ {
+ assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
+
+ /* HSE is selected as System Clock Source */
+ if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+ {
+ /* Check the HSE ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ /* PLL is selected as System Clock Source */
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+ {
+ /* Check the PLL ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ /* HSI is selected as System Clock Source */
+ else
+ {
+ /* Check the HSI ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource);
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos))
+ {
+ if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Decreasing the number of wait states because of lower CPU frequency */
+ if(FLatency < __HAL_FLASH_GET_LATENCY())
+ {
+ /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+ __HAL_FLASH_SET_LATENCY(FLatency);
+
+ /* Check that the new number of wait states is taken into account to access the Flash
+ memory by reading the FLASH_ACR register */
+ if(__HAL_FLASH_GET_LATENCY() != FLatency)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /*-------------------------- PCLK1 Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
+ {
+ assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider);
+ }
+
+ /*-------------------------- PCLK2 Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
+ {
+ assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3));
+ }
+
+ /* Update the SystemCoreClock global variable */
+ SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_Pos];
+
+ /* Configure the source of time base considering new system clocks settings*/
+ HAL_InitTick (TICK_INT_PRIORITY);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions
+ * @brief RCC clocks control functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the RCC Clocks
+ frequencies.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Selects the clock source to output on MCO1 pin(PA8) or on MCO2 pin(PC9).
+ * @note PA8/PC9 should be configured in alternate function mode.
+ * @param RCC_MCOx specifies the output direction for the clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO1: Clock source to output on MCO1 pin(PA8).
+ * @arg RCC_MCO2: Clock source to output on MCO2 pin(PC9).
+ * @param RCC_MCOSource specifies the clock source to output.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
+ * @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
+ * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
+ * @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
+ * @param RCC_MCODiv specifies the MCOx prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCODIV_1: no division applied to MCOx clock
+ * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
+ * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
+ * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
+ * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
+ * @retval None
+ */
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv)
+{
+ GPIO_InitTypeDef GPIO_InitStruct;
+ /* Check the parameters */
+ assert_param(IS_RCC_MCO(RCC_MCOx));
+ assert_param(IS_RCC_MCODIV(RCC_MCODiv));
+ /* RCC_MCO1 */
+ if(RCC_MCOx == RCC_MCO1)
+ {
+ assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource));
+
+ /* MCO1 Clock Enable */
+ MCO1_CLK_ENABLE();
+
+ /* Configure the MCO1 pin in alternate function mode */
+ GPIO_InitStruct.Pin = MCO1_PIN;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
+ HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct);
+
+ /* Mask MCO1 and MCO1PRE[2:0] bits then Select MCO1 clock source and prescaler */
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), (RCC_MCOSource | RCC_MCODiv));
+ }
+ else
+ {
+ assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource));
+
+ /* MCO2 Clock Enable */
+ MCO2_CLK_ENABLE();
+
+ /* Configure the MCO2 pin in alternate function mode */
+ GPIO_InitStruct.Pin = MCO2_PIN;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
+ HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct);
+
+ /* Mask MCO2 and MCO2PRE[2:0] bits then Select MCO2 clock source and prescaler */
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), (RCC_MCOSource | (RCC_MCODiv << 3)));
+ }
+}
+
+/**
+ * @brief Enables the Clock Security System.
+ * @note If a failure is detected on the HSE oscillator clock, this oscillator
+ * is automatically disabled and an interrupt is generated to inform the
+ * software about the failure (Clock Security System Interrupt, CSSI),
+ * allowing the MCU to perform rescue operations. The CSSI is linked to
+ * the Cortex-M7 NMI (Non-Maskable Interrupt) exception vector.
+ * @retval None
+ */
+void HAL_RCC_EnableCSS(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_CSSON);
+}
+
+/**
+ * @brief Disables the Clock Security System.
+ * @retval None
+ */
+void HAL_RCC_DisableCSS(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_CSSON);
+}
+
+/**
+ * @brief Returns the SYSCLK frequency
+ *
+ * @note The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
+ * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**)
+ * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ * @note (*) HSI_VALUE is a constant defined in stm32f7xx_hal_conf.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ * @note (**) HSE_VALUE is a constant defined in stm32f7xx_hal_conf.h file (default value
+ * 25 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * @note The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @note This function can be used by the user application to compute the
+ * baudrate for the communication peripherals or configure other parameters.
+ *
+ * @note Each time SYSCLK changes, this function must be called to update the
+ * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
+ *
+ *
+ * @retval SYSCLK frequency
+ */
+uint32_t HAL_RCC_GetSysClockFreq(void)
+{
+ uint32_t pllm = 0, pllvco = 0, pllp = 0;
+ uint32_t sysclockfreq = 0;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ switch (RCC->CFGR & RCC_CFGR_SWS)
+ {
+ case RCC_SYSCLKSOURCE_STATUS_HSI: /* HSI used as system clock source */
+ {
+ sysclockfreq = HSI_VALUE;
+ break;
+ }
+ case RCC_SYSCLKSOURCE_STATUS_HSE: /* HSE used as system clock source */
+ {
+ sysclockfreq = HSE_VALUE;
+ break;
+ }
+ case RCC_SYSCLKSOURCE_STATUS_PLLCLK: /* PLL used as system clock source */
+ {
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
+ SYSCLK = PLL_VCO / PLLP */
+ pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+ if (__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLCFGR_PLLSRC_HSI)
+ {
+ /* HSE used as PLL clock source */
+ pllvco = (uint32_t) ((((uint64_t) HSE_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm);
+ }
+ else
+ {
+ /* HSI used as PLL clock source */
+ pllvco = (uint32_t) ((((uint64_t) HSI_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm);
+ }
+ pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1 ) *2);
+
+ sysclockfreq = pllvco/pllp;
+ break;
+ }
+ default:
+ {
+ sysclockfreq = HSI_VALUE;
+ break;
+ }
+ }
+ return sysclockfreq;
+}
+
+/**
+ * @brief Returns the HCLK frequency
+ * @note Each time HCLK changes, this function must be called to update the
+ * right HCLK value. Otherwise, any configuration based on this function will be incorrect.
+ * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency.
+ * @retval HCLK frequency
+ */
+uint32_t HAL_RCC_GetHCLKFreq(void)
+{
+ return SystemCoreClock;
+}
+
+/**
+ * @brief Returns the PCLK1 frequency
+ * @note Each time PCLK1 changes, this function must be called to update the
+ * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect.
+ * @retval PCLK1 frequency
+ */
+uint32_t HAL_RCC_GetPCLK1Freq(void)
+{
+ /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/
+ return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1)>> RCC_CFGR_PPRE1_Pos]);
+}
+
+/**
+ * @brief Returns the PCLK2 frequency
+ * @note Each time PCLK2 changes, this function must be called to update the
+ * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect.
+ * @retval PCLK2 frequency
+ */
+uint32_t HAL_RCC_GetPCLK2Freq(void)
+{
+ /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/
+ return (HAL_RCC_GetHCLKFreq()>> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2)>> RCC_CFGR_PPRE2_Pos]);
+}
+
+/**
+ * @brief Configures the RCC_OscInitStruct according to the internal
+ * RCC configuration registers.
+ * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that
+ * will be configured.
+ * @retval None
+ */
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+{
+ /* Set all possible values for the Oscillator type parameter ---------------*/
+ RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
+
+ /* Get the HSE configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
+ }
+ else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
+ }
+
+ /* Get the HSI configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
+ {
+ RCC_OscInitStruct->HSIState = RCC_HSI_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
+ }
+
+ RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos);
+
+ /* Get the LSE configuration -----------------------------------------------*/
+ if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
+ }
+ else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
+ }
+
+ /* Get the LSI configuration -----------------------------------------------*/
+ if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
+ {
+ RCC_OscInitStruct->LSIState = RCC_LSI_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
+ }
+
+ /* Get the PLL configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
+ {
+ RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
+ }
+ RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
+ RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM);
+ RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos);
+ RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1) >> RCC_PLLCFGR_PLLP_Pos);
+ RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos);
+#if defined (RCC_PLLCFGR_PLLR)
+ RCC_OscInitStruct->PLL.PLLR = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> POSITION_VAL(RCC_PLLCFGR_PLLR));
+#endif
+}
+
+/**
+ * @brief Configures the RCC_ClkInitStruct according to the internal
+ * RCC configuration registers.
+ * @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that
+ * will be configured.
+ * @param pFLatency Pointer on the Flash Latency.
+ * @retval None
+ */
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency)
+{
+ /* Set all possible values for the Clock type parameter --------------------*/
+ RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+
+ /* Get the SYSCLK configuration --------------------------------------------*/
+ RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW);
+
+ /* Get the HCLK configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE);
+
+ /* Get the APB1 configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1);
+
+ /* Get the APB2 configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3);
+
+ /* Get the Flash Wait State (Latency) configuration ------------------------*/
+ *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY);
+}
+
+/**
+ * @brief This function handles the RCC CSS interrupt request.
+ * @note This API should be called under the NMI_Handler().
+ * @retval None
+ */
+void HAL_RCC_NMI_IRQHandler(void)
+{
+ /* Check RCC CSSF flag */
+ if(__HAL_RCC_GET_IT(RCC_IT_CSS))
+ {
+ /* RCC Clock Security System interrupt user callback */
+ HAL_RCC_CSSCallback();
+
+ /* Clear RCC CSS pending bit */
+ __HAL_RCC_CLEAR_IT(RCC_IT_CSS);
+ }
+}
+
+/**
+ * @brief RCC Clock Security System interrupt callback
+ * @retval None
+ */
+__weak void HAL_RCC_CSSCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RCC_CSSCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c
new file mode 100644
index 00000000..407609bd
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c
@@ -0,0 +1,1791 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_rcc_ex.c
+ * @author MCD Application Team
+ * @brief Extension RCC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities RCC extension peripheral:
+ * + Extended Peripheral Control functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RCCEx RCCEx
+ * @brief RCCEx HAL module driver
+ * @{
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Defines RCCEx Private Defines
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Macros RCCEx Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Private_Macros RCCEx Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions
+ * @{
+ */
+
+/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions
+ * @brief Extended Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the RCC Clocks
+ frequencies.
+ [..]
+ (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to
+ select the RTC clock source; in this case the Backup domain will be reset in
+ order to modify the RTC Clock source, as consequence RTC registers (including
+ the backup registers) and RCC_BDCR register will be set to their reset values.
+
+@endverbatim
+ * @{
+ */
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || \
+ defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+/**
+ * @brief Initializes the RCC extended peripherals clocks according to the specified
+ * parameters in the RCC_PeriphCLKInitTypeDef.
+ * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * contains the configuration information for the Extended Peripherals
+ * clocks(I2S, SAI, LTDC, RTC, TIM, UARTs, USARTs, LTPIM, SDMMC...).
+ *
+ * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
+ * the RTC clock source; in this case the Backup domain will be reset in
+ * order to modify the RTC Clock source, as consequence RTC registers (including
+ * the backup registers) are set to their reset values.
+ *
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tickstart = 0;
+ uint32_t tmpreg0 = 0;
+ uint32_t tmpreg1 = 0;
+ uint32_t plli2sused = 0;
+ uint32_t pllsaiused = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+ /*----------------------------------- I2S configuration ----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2SCLKSOURCE(PeriphClkInit->I2sClockSelection));
+
+ /* Configure I2S Clock source */
+ __HAL_RCC_I2S_CONFIG(PeriphClkInit->I2sClockSelection);
+
+ /* Enable the PLLI2S when it's used as clock source for I2S */
+ if(PeriphClkInit->I2sClockSelection == RCC_I2SCLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1;
+ }
+ }
+
+ /*------------------------------------ SAI1 configuration --------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == (RCC_PERIPHCLK_SAI1))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SAI1CLKSOURCE(PeriphClkInit->Sai1ClockSelection));
+
+ /* Configure SAI1 Clock source */
+ __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection);
+ /* Enable the PLLI2S when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1;
+ }
+ /* Enable the PLLSAI when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)
+ {
+ pllsaiused = 1;
+ }
+ }
+
+ /*------------------------------------ SAI2 configuration --------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == (RCC_PERIPHCLK_SAI2))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SAI2CLKSOURCE(PeriphClkInit->Sai2ClockSelection));
+
+ /* Configure SAI2 Clock source */
+ __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection);
+
+ /* Enable the PLLI2S when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1;
+ }
+ /* Enable the PLLSAI when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)
+ {
+ pllsaiused = 1;
+ }
+ }
+
+ /*-------------------------------------- SPDIF-RX Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX)
+ {
+ plli2sused = 1;
+ }
+
+ /*------------------------------------ RTC configuration --------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+ {
+ /* Check for RTC Parameters used to output RTCCLK */
+ assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR1 |= PWR_CR1_DBP;
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait for Backup domain Write protection disable */
+ while((PWR->CR1 & PWR_CR1_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reset the Backup domain only if the RTC Clock source selection is modified */
+ tmpreg0 = (RCC->BDCR & RCC_BDCR_RTCSEL);
+
+ if((tmpreg0 != 0x00000000U) && (tmpreg0 != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
+ {
+ /* Store the content of BDCR register before the reset of Backup Domain */
+ tmpreg0 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+
+ /* RTC Clock selection can be changed only if the Backup Domain is reset */
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+
+ /* Restore the Content of BDCR register */
+ RCC->BDCR = tmpreg0;
+
+ /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */
+ if (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON))
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+ }
+
+ /*------------------------------------ TIM configuration --------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIMPRES(PeriphClkInit->TIMPresSelection));
+
+ /* Configure Timer Prescaler */
+ __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+ }
+
+ /*-------------------------------------- I2C1 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection));
+
+ /* Configure the I2C1 clock source */
+ __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection);
+ }
+
+ /*-------------------------------------- I2C2 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C2CLKSOURCE(PeriphClkInit->I2c2ClockSelection));
+
+ /* Configure the I2C2 clock source */
+ __HAL_RCC_I2C2_CONFIG(PeriphClkInit->I2c2ClockSelection);
+ }
+
+ /*-------------------------------------- I2C3 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C3CLKSOURCE(PeriphClkInit->I2c3ClockSelection));
+
+ /* Configure the I2C3 clock source */
+ __HAL_RCC_I2C3_CONFIG(PeriphClkInit->I2c3ClockSelection);
+ }
+
+ /*-------------------------------------- I2C4 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C4CLKSOURCE(PeriphClkInit->I2c4ClockSelection));
+
+ /* Configure the I2C4 clock source */
+ __HAL_RCC_I2C4_CONFIG(PeriphClkInit->I2c4ClockSelection);
+ }
+
+ /*-------------------------------------- USART1 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection));
+
+ /* Configure the USART1 clock source */
+ __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection);
+ }
+
+ /*-------------------------------------- USART2 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection));
+
+ /* Configure the USART2 clock source */
+ __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection);
+ }
+
+ /*-------------------------------------- USART3 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection));
+
+ /* Configure the USART3 clock source */
+ __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection);
+ }
+
+ /*-------------------------------------- UART4 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART4CLKSOURCE(PeriphClkInit->Uart4ClockSelection));
+
+ /* Configure the UART4 clock source */
+ __HAL_RCC_UART4_CONFIG(PeriphClkInit->Uart4ClockSelection);
+ }
+
+ /*-------------------------------------- UART5 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART5CLKSOURCE(PeriphClkInit->Uart5ClockSelection));
+
+ /* Configure the UART5 clock source */
+ __HAL_RCC_UART5_CONFIG(PeriphClkInit->Uart5ClockSelection);
+ }
+
+ /*-------------------------------------- USART6 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART6CLKSOURCE(PeriphClkInit->Usart6ClockSelection));
+
+ /* Configure the USART6 clock source */
+ __HAL_RCC_USART6_CONFIG(PeriphClkInit->Usart6ClockSelection);
+ }
+
+ /*-------------------------------------- UART7 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART7CLKSOURCE(PeriphClkInit->Uart7ClockSelection));
+
+ /* Configure the UART7 clock source */
+ __HAL_RCC_UART7_CONFIG(PeriphClkInit->Uart7ClockSelection);
+ }
+
+ /*-------------------------------------- UART8 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART8CLKSOURCE(PeriphClkInit->Uart8ClockSelection));
+
+ /* Configure the UART8 clock source */
+ __HAL_RCC_UART8_CONFIG(PeriphClkInit->Uart8ClockSelection);
+ }
+
+ /*--------------------------------------- CEC Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection));
+
+ /* Configure the CEC clock source */
+ __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection);
+ }
+
+ /*-------------------------------------- CK48 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_CLK48SOURCE(PeriphClkInit->Clk48ClockSelection));
+
+ /* Configure the CLK48 source */
+ __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection);
+
+ /* Enable the PLLSAI when it's used as clock source for CK48 */
+ if(PeriphClkInit->Clk48ClockSelection == RCC_CLK48SOURCE_PLLSAIP)
+ {
+ pllsaiused = 1;
+ }
+ }
+
+ /*-------------------------------------- LTDC Configuration -----------------------------------*/
+#if defined(STM32F746xx) || defined(STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC)
+ {
+ pllsaiused = 1;
+ }
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+ /*-------------------------------------- LPTIM1 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LPTIM1CLK(PeriphClkInit->Lptim1ClockSelection));
+
+ /* Configure the LTPIM1 clock source */
+ __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection);
+ }
+
+ /*------------------------------------- SDMMC1 Configuration ------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SDMMC1CLKSOURCE(PeriphClkInit->Sdmmc1ClockSelection));
+
+ /* Configure the SDMMC1 clock source */
+ __HAL_RCC_SDMMC1_CONFIG(PeriphClkInit->Sdmmc1ClockSelection);
+ }
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ /*------------------------------------- SDMMC2 Configuration ------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC2) == RCC_PERIPHCLK_SDMMC2)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SDMMC2CLKSOURCE(PeriphClkInit->Sdmmc2ClockSelection));
+
+ /* Configure the SDMMC2 clock source */
+ __HAL_RCC_SDMMC2_CONFIG(PeriphClkInit->Sdmmc2ClockSelection);
+ }
+
+ /*------------------------------------- DFSDM1 Configuration -------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_DFSDM1CLKSOURCE(PeriphClkInit->Dfsdm1ClockSelection));
+
+ /* Configure the DFSDM1 interface clock source */
+ __HAL_RCC_DFSDM1_CONFIG(PeriphClkInit->Dfsdm1ClockSelection);
+ }
+
+ /*------------------------------------- DFSDM AUDIO Configuration -------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1_AUDIO) == RCC_PERIPHCLK_DFSDM1_AUDIO)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_DFSDM1AUDIOCLKSOURCE(PeriphClkInit->Dfsdm1AudioClockSelection));
+
+ /* Configure the DFSDM interface clock source */
+ __HAL_RCC_DFSDM1AUDIO_CONFIG(PeriphClkInit->Dfsdm1AudioClockSelection);
+ }
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+ /*-------------------------------------- PLLI2S Configuration ---------------------------------*/
+ /* PLLI2S is configured when a peripheral will use it as source clock : SAI1, SAI2, I2S or SPDIF-RX */
+ if((plli2sused == 1) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S))
+ {
+ /* Disable the PLLI2S */
+ __HAL_RCC_PLLI2S_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLLI2S is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* check for common PLLI2S Parameters */
+ assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+
+ /*----------------- In Case of PLLI2S is selected as source clock for I2S -------------------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) && (PeriphClkInit->I2sClockSelection == RCC_I2SCLKSOURCE_PLLI2S)))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+
+ /* Read PLLI2SP and PLLI2SQ value from PLLI2SCFGR register (this value is not needed for I2S configuration) */
+ tmpreg0 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos);
+ tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos);
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLM) */
+ /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , tmpreg0, tmpreg1, PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /*----------------- In Case of PLLI2S is selected as source clock for SAI -------------------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)) ||
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S)))
+ {
+ /* Check for PLLI2S Parameters */
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+ /* Check for PLLI2S/DIVQ parameters */
+ assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ));
+
+ /* Read PLLI2SP and PLLI2SR values from PLLI2SCFGR register (this value is not needed for SAI configuration) */
+ tmpreg0 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos);
+ tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos);
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN, tmpreg0, PeriphClkInit->PLLI2S.PLLI2SQ, tmpreg1);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+ __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ);
+ }
+
+ /*----------------- In Case of PLLI2S is selected as source clock for SPDIF-RX -------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX)
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP));
+
+ /* Read PLLI2SR value from PLLI2SCFGR register (this value is not needed for SPDIF-RX configuration) */
+ tmpreg0 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos);
+ tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos);
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLM) */
+ /* SPDIFCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, tmpreg0, tmpreg1);
+ }
+
+ /*----------------- In Case of PLLI2S is just selected -----------------*/
+ if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)
+ {
+ /* Check for Parameters */
+ assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP));
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLI2SM) */
+ /* SPDIFRXCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /* Enable the PLLI2S */
+ __HAL_RCC_PLLI2S_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLLI2S is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /*-------------------------------------- PLLSAI Configuration ---------------------------------*/
+ /* PLLSAI is configured when a peripheral will use it as source clock : SAI1, SAI2, LTDC or CK48 */
+ if(pllsaiused == 1)
+ {
+ /* Disable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLLSAI is disabled */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Check the PLLSAI division factors */
+ assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN));
+
+ /*----------------- In Case of PLLSAI is selected as source clock for SAI -------------------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)) ||\
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)))
+ {
+ /* check for PLLSAIQ Parameter */
+ assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ));
+ /* check for PLLSAI/DIVQ Parameter */
+ assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ));
+
+ /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */
+ tmpreg0 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos);
+ tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLSAICFGR_PLLSAIR_Pos);
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg0, PeriphClkInit->PLLSAI.PLLSAIQ, tmpreg1);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+ __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ);
+ }
+
+ /*----------------- In Case of PLLSAI is selected as source clock for CLK48 -------------------*/
+ /* In Case of PLLI2S is selected as source clock for CK48 */
+ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48SOURCE_PLLSAIP))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP));
+ /* Read PLLSAIQ and PLLSAIR value from PLLSAICFGR register (this value is not needed for CK48 configuration) */
+ tmpreg0 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos);
+ tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos);
+
+ /* Configure the PLLSAI division factors */
+ /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) x (PLLI2SN/PLLM) */
+ /* 48CLK = f(PLLSAI clock output) = f(VCO clock) / PLLSAIP */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIP, tmpreg0, tmpreg1);
+ }
+
+#if defined(STM32F746xx) || defined(STM32F756xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ /*---------------------------- LTDC configuration -------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == (RCC_PERIPHCLK_LTDC))
+ {
+ assert_param(IS_RCC_PLLSAIR_VALUE(PeriphClkInit->PLLSAI.PLLSAIR));
+ assert_param(IS_RCC_PLLSAI_DIVR_VALUE(PeriphClkInit->PLLSAIDivR));
+
+ /* Read PLLSAIP and PLLSAIQ value from PLLSAICFGR register (these value are not needed for LTDC configuration) */
+ tmpreg0 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos);
+ tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos);
+
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* LTDC_CLK(first level) = PLLSAI_VCO Output/PLLSAIR */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg1, tmpreg0, PeriphClkInit->PLLSAI.PLLSAIR);
+
+ /* LTDC_CLK = LTDC_CLK(first level)/PLLSAIDIVR */
+ __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLSAIDivR);
+ }
+#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+ /* Enable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLLSAI is ready */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Get the RCC_PeriphCLKInitTypeDef according to the internal
+ * RCC configuration registers.
+ * @param PeriphClkInit pointer to the configured RCC_PeriphCLKInitTypeDef structure
+ * @retval None
+ */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tempreg = 0;
+
+ /* Set all possible values for the extended clock type parameter------------*/
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_LPTIM1 |\
+ RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 |\
+ RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_I2C4 |\
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 |\
+ RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_USART1 |\
+ RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 |\
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 |\
+ RCC_PERIPHCLK_USART6 | RCC_PERIPHCLK_UART7 |\
+ RCC_PERIPHCLK_UART8 | RCC_PERIPHCLK_SDMMC1 |\
+ RCC_PERIPHCLK_CLK48 | RCC_PERIPHCLK_SDMMC2 |\
+ RCC_PERIPHCLK_DFSDM1 | RCC_PERIPHCLK_DFSDM1_AUDIO;
+#else
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_LPTIM1 |\
+ RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 |\
+ RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_I2C4 |\
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 |\
+ RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_USART1 |\
+ RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 |\
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 |\
+ RCC_PERIPHCLK_USART6 | RCC_PERIPHCLK_UART7 |\
+ RCC_PERIPHCLK_UART8 | RCC_PERIPHCLK_SDMMC1 |\
+ RCC_PERIPHCLK_CLK48;
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+ /* Get the PLLI2S Clock configuration -----------------------------------------------*/
+ PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos);
+ PeriphClkInit->PLLI2S.PLLI2SP = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos);
+ PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos);
+ PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos);
+
+ /* Get the PLLSAI Clock configuration -----------------------------------------------*/
+ PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos);
+ PeriphClkInit->PLLSAI.PLLSAIP = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos);
+ PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos);
+ PeriphClkInit->PLLSAI.PLLSAIR = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos);
+
+ /* Get the PLLSAI/PLLI2S division factors -------------------------------------------*/
+ PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLI2SDIVQ) >> RCC_DCKCFGR1_PLLI2SDIVQ_Pos);
+ PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLSAIDIVQ) >> RCC_DCKCFGR1_PLLSAIDIVQ_Pos);
+ PeriphClkInit->PLLSAIDivR = (uint32_t)((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLSAIDIVR) >> RCC_DCKCFGR1_PLLSAIDIVR_Pos);
+
+ /* Get the SAI1 clock configuration ----------------------------------------------*/
+ PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE();
+
+ /* Get the SAI2 clock configuration ----------------------------------------------*/
+ PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE();
+
+ /* Get the I2S clock configuration ------------------------------------------*/
+ PeriphClkInit->I2sClockSelection = __HAL_RCC_GET_I2SCLKSOURCE();
+
+ /* Get the I2C1 clock configuration ------------------------------------------*/
+ PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE();
+
+ /* Get the I2C2 clock configuration ------------------------------------------*/
+ PeriphClkInit->I2c2ClockSelection = __HAL_RCC_GET_I2C2_SOURCE();
+
+ /* Get the I2C3 clock configuration ------------------------------------------*/
+ PeriphClkInit->I2c3ClockSelection = __HAL_RCC_GET_I2C3_SOURCE();
+
+ /* Get the I2C4 clock configuration ------------------------------------------*/
+ PeriphClkInit->I2c4ClockSelection = __HAL_RCC_GET_I2C4_SOURCE();
+
+ /* Get the USART1 clock configuration ------------------------------------------*/
+ PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE();
+
+ /* Get the USART2 clock configuration ------------------------------------------*/
+ PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE();
+
+ /* Get the USART3 clock configuration ------------------------------------------*/
+ PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE();
+
+ /* Get the UART4 clock configuration ------------------------------------------*/
+ PeriphClkInit->Uart4ClockSelection = __HAL_RCC_GET_UART4_SOURCE();
+
+ /* Get the UART5 clock configuration ------------------------------------------*/
+ PeriphClkInit->Uart5ClockSelection = __HAL_RCC_GET_UART5_SOURCE();
+
+ /* Get the USART6 clock configuration ------------------------------------------*/
+ PeriphClkInit->Usart6ClockSelection = __HAL_RCC_GET_USART6_SOURCE();
+
+ /* Get the UART7 clock configuration ------------------------------------------*/
+ PeriphClkInit->Uart7ClockSelection = __HAL_RCC_GET_UART7_SOURCE();
+
+ /* Get the UART8 clock configuration ------------------------------------------*/
+ PeriphClkInit->Uart8ClockSelection = __HAL_RCC_GET_UART8_SOURCE();
+
+ /* Get the LPTIM1 clock configuration ------------------------------------------*/
+ PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE();
+
+ /* Get the CEC clock configuration -----------------------------------------------*/
+ PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE();
+
+ /* Get the CK48 clock configuration -----------------------------------------------*/
+ PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE();
+
+ /* Get the SDMMC1 clock configuration -----------------------------------------------*/
+ PeriphClkInit->Sdmmc1ClockSelection = __HAL_RCC_GET_SDMMC1_SOURCE();
+
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ /* Get the SDMMC2 clock configuration -----------------------------------------------*/
+ PeriphClkInit->Sdmmc2ClockSelection = __HAL_RCC_GET_SDMMC2_SOURCE();
+
+ /* Get the DFSDM clock configuration -----------------------------------------------*/
+ PeriphClkInit->Dfsdm1ClockSelection = __HAL_RCC_GET_DFSDM1_SOURCE();
+
+ /* Get the DFSDM AUDIO clock configuration -----------------------------------------------*/
+ PeriphClkInit->Dfsdm1AudioClockSelection = __HAL_RCC_GET_DFSDM1AUDIO_SOURCE();
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+ /* Get the RTC Clock configuration -----------------------------------------------*/
+ tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+ PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+ /* Get the TIM Prescaler configuration --------------------------------------------*/
+ if ((RCC->DCKCFGR1 & RCC_DCKCFGR1_TIMPRE) == RESET)
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+ }
+ else
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+ }
+}
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx)
+/**
+ * @brief Initializes the RCC extended peripherals clocks according to the specified
+ * parameters in the RCC_PeriphCLKInitTypeDef.
+ * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * contains the configuration information for the Extended Peripherals
+ * clocks(I2S, SAI, RTC, TIM, UARTs, USARTs, LTPIM, SDMMC...).
+ *
+ * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
+ * the RTC clock source; in this case the Backup domain will be reset in
+ * order to modify the RTC Clock source, as consequence RTC registers (including
+ * the backup registers) are set to their reset values.
+ *
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tickstart = 0;
+ uint32_t tmpreg0 = 0;
+ uint32_t plli2sused = 0;
+ uint32_t pllsaiused = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+ /*----------------------------------- I2S configuration ----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2SCLKSOURCE(PeriphClkInit->I2sClockSelection));
+
+ /* Configure I2S Clock source */
+ __HAL_RCC_I2S_CONFIG(PeriphClkInit->I2sClockSelection);
+
+ /* Enable the PLLI2S when it's used as clock source for I2S */
+ if(PeriphClkInit->I2sClockSelection == RCC_I2SCLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1;
+ }
+ }
+
+ /*------------------------------------ SAI1 configuration --------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == (RCC_PERIPHCLK_SAI1))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SAI1CLKSOURCE(PeriphClkInit->Sai1ClockSelection));
+
+ /* Configure SAI1 Clock source */
+ __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection);
+ /* Enable the PLLI2S when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1;
+ }
+ /* Enable the PLLSAI when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)
+ {
+ pllsaiused = 1;
+ }
+ }
+
+ /*------------------------------------ SAI2 configuration --------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == (RCC_PERIPHCLK_SAI2))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SAI2CLKSOURCE(PeriphClkInit->Sai2ClockSelection));
+
+ /* Configure SAI2 Clock source */
+ __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection);
+
+ /* Enable the PLLI2S when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S)
+ {
+ plli2sused = 1;
+ }
+ /* Enable the PLLSAI when it's used as clock source for SAI */
+ if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)
+ {
+ pllsaiused = 1;
+ }
+ }
+
+ /*------------------------------------ RTC configuration --------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+ {
+ /* Check for RTC Parameters used to output RTCCLK */
+ assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ PWR->CR1 |= PWR_CR1_DBP;
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait for Backup domain Write protection disable */
+ while((PWR->CR1 & PWR_CR1_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reset the Backup domain only if the RTC Clock source selection is modified */
+ tmpreg0 = (RCC->BDCR & RCC_BDCR_RTCSEL);
+
+ if((tmpreg0 != 0x00000000U) && (tmpreg0 != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
+ {
+ /* Store the content of BDCR register before the reset of Backup Domain */
+ tmpreg0 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+
+ /* RTC Clock selection can be changed only if the Backup Domain is reset */
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+
+ /* Restore the Content of BDCR register */
+ RCC->BDCR = tmpreg0;
+
+ /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */
+ if (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON))
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+ }
+
+ /*------------------------------------ TIM configuration --------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIMPRES(PeriphClkInit->TIMPresSelection));
+
+ /* Configure Timer Prescaler */
+ __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+ }
+
+ /*-------------------------------------- I2C1 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection));
+
+ /* Configure the I2C1 clock source */
+ __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection);
+ }
+
+ /*-------------------------------------- I2C2 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C2CLKSOURCE(PeriphClkInit->I2c2ClockSelection));
+
+ /* Configure the I2C2 clock source */
+ __HAL_RCC_I2C2_CONFIG(PeriphClkInit->I2c2ClockSelection);
+ }
+
+ /*-------------------------------------- I2C3 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C3CLKSOURCE(PeriphClkInit->I2c3ClockSelection));
+
+ /* Configure the I2C3 clock source */
+ __HAL_RCC_I2C3_CONFIG(PeriphClkInit->I2c3ClockSelection);
+ }
+
+ /*-------------------------------------- USART1 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection));
+
+ /* Configure the USART1 clock source */
+ __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection);
+ }
+
+ /*-------------------------------------- USART2 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection));
+
+ /* Configure the USART2 clock source */
+ __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection);
+ }
+
+ /*-------------------------------------- USART3 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection));
+
+ /* Configure the USART3 clock source */
+ __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection);
+ }
+
+ /*-------------------------------------- UART4 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART4CLKSOURCE(PeriphClkInit->Uart4ClockSelection));
+
+ /* Configure the UART4 clock source */
+ __HAL_RCC_UART4_CONFIG(PeriphClkInit->Uart4ClockSelection);
+ }
+
+ /*-------------------------------------- UART5 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART5CLKSOURCE(PeriphClkInit->Uart5ClockSelection));
+
+ /* Configure the UART5 clock source */
+ __HAL_RCC_UART5_CONFIG(PeriphClkInit->Uart5ClockSelection);
+ }
+
+ /*-------------------------------------- USART6 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART6CLKSOURCE(PeriphClkInit->Usart6ClockSelection));
+
+ /* Configure the USART6 clock source */
+ __HAL_RCC_USART6_CONFIG(PeriphClkInit->Usart6ClockSelection);
+ }
+
+ /*-------------------------------------- UART7 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART7CLKSOURCE(PeriphClkInit->Uart7ClockSelection));
+
+ /* Configure the UART7 clock source */
+ __HAL_RCC_UART7_CONFIG(PeriphClkInit->Uart7ClockSelection);
+ }
+
+ /*-------------------------------------- UART8 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART8CLKSOURCE(PeriphClkInit->Uart8ClockSelection));
+
+ /* Configure the UART8 clock source */
+ __HAL_RCC_UART8_CONFIG(PeriphClkInit->Uart8ClockSelection);
+ }
+
+ /*-------------------------------------- CK48 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_CLK48SOURCE(PeriphClkInit->Clk48ClockSelection));
+
+ /* Configure the CLK48 source */
+ __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection);
+
+ /* Enable the PLLSAI when it's used as clock source for CK48 */
+ if(PeriphClkInit->Clk48ClockSelection == RCC_CLK48SOURCE_PLLSAIP)
+ {
+ pllsaiused = 1;
+ }
+ }
+
+ /*-------------------------------------- LPTIM1 Configuration -----------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LPTIM1CLK(PeriphClkInit->Lptim1ClockSelection));
+
+ /* Configure the LTPIM1 clock source */
+ __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection);
+ }
+
+ /*------------------------------------- SDMMC1 Configuration ------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SDMMC1CLKSOURCE(PeriphClkInit->Sdmmc1ClockSelection));
+
+ /* Configure the SDMMC1 clock source */
+ __HAL_RCC_SDMMC1_CONFIG(PeriphClkInit->Sdmmc1ClockSelection);
+ }
+
+ /*------------------------------------- SDMMC2 Configuration ------------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC2) == RCC_PERIPHCLK_SDMMC2)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SDMMC2CLKSOURCE(PeriphClkInit->Sdmmc2ClockSelection));
+
+ /* Configure the SDMMC2 clock source */
+ __HAL_RCC_SDMMC2_CONFIG(PeriphClkInit->Sdmmc2ClockSelection);
+ }
+
+ /*-------------------------------------- PLLI2S Configuration ---------------------------------*/
+ /* PLLI2S is configured when a peripheral will use it as source clock : SAI1, SAI2 or I2S */
+ if((plli2sused == 1) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S))
+ {
+ /* Disable the PLLI2S */
+ __HAL_RCC_PLLI2S_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLLI2S is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* check for common PLLI2S Parameters */
+ assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+
+ /*----------------- In Case of PLLI2S is selected as source clock for I2S -------------------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) && (PeriphClkInit->I2sClockSelection == RCC_I2SCLKSOURCE_PLLI2S)))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+
+ /* Read PLLI2SQ value from PLLI2SCFGR register (this value is not needed for I2S configuration) */
+ tmpreg0 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos);
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLM) */
+ /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , tmpreg0, PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /*----------------- In Case of PLLI2S is selected as source clock for SAI -------------------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)) ||
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S)))
+ {
+ /* Check for PLLI2S Parameters */
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+ /* Check for PLLI2S/DIVQ parameters */
+ assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ));
+
+ /* Read PLLI2SP and PLLI2SR values from PLLI2SCFGR register (this value is not needed for SAI configuration) */
+ tmpreg0 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos);
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SQ, tmpreg0);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+ __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ);
+ }
+
+ /*----------------- In Case of PLLI2S is just selected -----------------*/
+ if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)
+ {
+ /* Check for Parameters */
+ assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+
+ /* Configure the PLLI2S division factors */
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLI2SM) */
+ __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR);
+ }
+
+ /* Enable the PLLI2S */
+ __HAL_RCC_PLLI2S_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLLI2S is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /*-------------------------------------- PLLSAI Configuration ---------------------------------*/
+ /* PLLSAI is configured when a peripheral will use it as source clock : SAI1, SAI2, LTDC or CK48 */
+ if(pllsaiused == 1)
+ {
+ /* Disable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLLSAI is disabled */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Check the PLLSAI division factors */
+ assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN));
+
+ /*----------------- In Case of PLLSAI is selected as source clock for SAI -------------------*/
+ if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)) ||\
+ ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)))
+ {
+ /* check for PLLSAIQ Parameter */
+ assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ));
+ /* check for PLLSAI/DIVQ Parameter */
+ assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ));
+
+ /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */
+ tmpreg0 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos);
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg0, PeriphClkInit->PLLSAI.PLLSAIQ);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+ __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ);
+ }
+
+ /*----------------- In Case of PLLSAI is selected as source clock for CLK48 -------------------*/
+ /* In Case of PLLI2S is selected as source clock for CK48 */
+ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48SOURCE_PLLSAIP))
+ {
+ /* check for Parameters */
+ assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP));
+ /* Read PLLSAIQ and PLLSAIR value from PLLSAICFGR register (this value is not needed for CK48 configuration) */
+ tmpreg0 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos);
+
+ /* Configure the PLLSAI division factors */
+ /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) x (PLLI2SN/PLLM) */
+ /* 48CLK = f(PLLSAI clock output) = f(VCO clock) / PLLSAIP */
+ __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIP, tmpreg0);
+ }
+
+ /* Enable PLLSAI Clock */
+ __HAL_RCC_PLLSAI_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLLSAI is ready */
+ while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Get the RCC_PeriphCLKInitTypeDef according to the internal
+ * RCC configuration registers.
+ * @param PeriphClkInit pointer to the configured RCC_PeriphCLKInitTypeDef structure
+ * @retval None
+ */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tempreg = 0;
+
+ /* Set all possible values for the extended clock type parameter------------*/
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_LPTIM1 |\
+ RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 |\
+ RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 |\
+ RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_USART1 |\
+ RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 |\
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 |\
+ RCC_PERIPHCLK_USART6 | RCC_PERIPHCLK_UART7 |\
+ RCC_PERIPHCLK_UART8 | RCC_PERIPHCLK_SDMMC1 |\
+ RCC_PERIPHCLK_CLK48 | RCC_PERIPHCLK_SDMMC2;
+
+ /* Get the PLLI2S Clock configuration -----------------------------------------------*/
+ PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos);
+ PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos);
+ PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos);
+
+ /* Get the PLLSAI Clock configuration -----------------------------------------------*/
+ PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos);
+ PeriphClkInit->PLLSAI.PLLSAIP = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos);
+ PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos);
+
+ /* Get the PLLSAI/PLLI2S division factors -------------------------------------------*/
+ PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLI2SDIVQ) >> RCC_DCKCFGR1_PLLI2SDIVQ_Pos);
+ PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLSAIDIVQ) >> RCC_DCKCFGR1_PLLSAIDIVQ_Pos);
+
+ /* Get the SAI1 clock configuration ----------------------------------------------*/
+ PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE();
+
+ /* Get the SAI2 clock configuration ----------------------------------------------*/
+ PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE();
+
+ /* Get the I2S clock configuration ------------------------------------------*/
+ PeriphClkInit->I2sClockSelection = __HAL_RCC_GET_I2SCLKSOURCE();
+
+ /* Get the I2C1 clock configuration ------------------------------------------*/
+ PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE();
+
+ /* Get the I2C2 clock configuration ------------------------------------------*/
+ PeriphClkInit->I2c2ClockSelection = __HAL_RCC_GET_I2C2_SOURCE();
+
+ /* Get the I2C3 clock configuration ------------------------------------------*/
+ PeriphClkInit->I2c3ClockSelection = __HAL_RCC_GET_I2C3_SOURCE();
+
+ /* Get the USART1 clock configuration ------------------------------------------*/
+ PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE();
+
+ /* Get the USART2 clock configuration ------------------------------------------*/
+ PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE();
+
+ /* Get the USART3 clock configuration ------------------------------------------*/
+ PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE();
+
+ /* Get the UART4 clock configuration ------------------------------------------*/
+ PeriphClkInit->Uart4ClockSelection = __HAL_RCC_GET_UART4_SOURCE();
+
+ /* Get the UART5 clock configuration ------------------------------------------*/
+ PeriphClkInit->Uart5ClockSelection = __HAL_RCC_GET_UART5_SOURCE();
+
+ /* Get the USART6 clock configuration ------------------------------------------*/
+ PeriphClkInit->Usart6ClockSelection = __HAL_RCC_GET_USART6_SOURCE();
+
+ /* Get the UART7 clock configuration ------------------------------------------*/
+ PeriphClkInit->Uart7ClockSelection = __HAL_RCC_GET_UART7_SOURCE();
+
+ /* Get the UART8 clock configuration ------------------------------------------*/
+ PeriphClkInit->Uart8ClockSelection = __HAL_RCC_GET_UART8_SOURCE();
+
+ /* Get the LPTIM1 clock configuration ------------------------------------------*/
+ PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE();
+
+ /* Get the CK48 clock configuration -----------------------------------------------*/
+ PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE();
+
+ /* Get the SDMMC1 clock configuration -----------------------------------------------*/
+ PeriphClkInit->Sdmmc1ClockSelection = __HAL_RCC_GET_SDMMC1_SOURCE();
+
+ /* Get the SDMMC2 clock configuration -----------------------------------------------*/
+ PeriphClkInit->Sdmmc2ClockSelection = __HAL_RCC_GET_SDMMC2_SOURCE();
+
+ /* Get the RTC Clock configuration -----------------------------------------------*/
+ tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+ PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+ /* Get the TIM Prescaler configuration --------------------------------------------*/
+ if ((RCC->DCKCFGR1 & RCC_DCKCFGR1_TIMPRE) == RESET)
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+ }
+ else
+ {
+ PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+ }
+}
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx */
+
+/**
+ * @brief Return the peripheral clock frequency for a given peripheral(SAI..)
+ * @note Return 0 if peripheral clock identifier not managed by this API
+ * @param PeriphClk Peripheral clock identifier
+ * This parameter can be one of the following values:
+ * @arg RCC_PERIPHCLK_SAI1: SAI1 peripheral clock
+ * @arg RCC_PERIPHCLK_SAI2: SAI2 peripheral clock
+ * @retval Frequency in KHz
+ */
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk)
+{
+ uint32_t tmpreg = 0;
+ /* This variable is used to store the SAI clock frequency (value in Hz) */
+ uint32_t frequency = 0;
+ /* This variable is used to store the VCO Input (value in Hz) */
+ uint32_t vcoinput = 0;
+ /* This variable is used to store the SAI clock source */
+ uint32_t saiclocksource = 0;
+
+ if (PeriphClk == RCC_PERIPHCLK_SAI1)
+ {
+ saiclocksource = RCC->DCKCFGR1;
+ saiclocksource &= RCC_DCKCFGR1_SAI1SEL;
+ switch (saiclocksource)
+ {
+ case 0: /* PLLSAI is the clock source for SAI1 */
+ {
+ /* Configure the PLLSAI division factor */
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the PLL Source is HSI (Internal Clock) */
+ vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+ else
+ {
+ /* In Case the PLL Source is HSE (External Clock) */
+ vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+ }
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+ tmpreg = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24;
+ frequency = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6))/(tmpreg);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+ tmpreg = (((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLSAIDIVQ) >> 8) + 1);
+ frequency = frequency/(tmpreg);
+ break;
+ }
+ case RCC_DCKCFGR1_SAI1SEL_0: /* PLLI2S is the clock source for SAI1 */
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the PLL Source is HSI (Internal Clock) */
+ vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+ else
+ {
+ /* In Case the PLL Source is HSE (External Clock) */
+ vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+ }
+
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+ tmpreg = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24;
+ frequency = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6))/(tmpreg);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+ tmpreg = ((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLI2SDIVQ) + 1);
+ frequency = frequency/(tmpreg);
+ break;
+ }
+ case RCC_DCKCFGR1_SAI1SEL_1: /* External clock is the clock source for SAI1 */
+ {
+ frequency = EXTERNAL_CLOCK_VALUE;
+ break;
+ }
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ case RCC_DCKCFGR1_SAI1SEL: /* HSI or HSE is the clock source for SAI*/
+ {
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the main PLL Source is HSI */
+ frequency = HSI_VALUE;
+ }
+ else
+ {
+ /* In Case the main PLL Source is HSE */
+ frequency = HSE_VALUE;
+ }
+ break;
+ }
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+ default :
+ {
+ break;
+ }
+ }
+ }
+
+ if (PeriphClk == RCC_PERIPHCLK_SAI2)
+ {
+ saiclocksource = RCC->DCKCFGR1;
+ saiclocksource &= RCC_DCKCFGR1_SAI2SEL;
+ switch (saiclocksource)
+ {
+ case 0: /* PLLSAI is the clock source for SAI*/
+ {
+ /* Configure the PLLSAI division factor */
+ /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the PLL Source is HSI (Internal Clock) */
+ vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+ else
+ {
+ /* In Case the PLL Source is HSE (External Clock) */
+ vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+ }
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+ /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+ tmpreg = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24;
+ frequency = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6))/(tmpreg);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+ tmpreg = (((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLSAIDIVQ) >> 8) + 1);
+ frequency = frequency/(tmpreg);
+ break;
+ }
+ case RCC_DCKCFGR1_SAI2SEL_0: /* PLLI2S is the clock source for SAI2 */
+ {
+ /* Configure the PLLI2S division factor */
+ /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the PLL Source is HSI (Internal Clock) */
+ vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+ }
+ else
+ {
+ /* In Case the PLL Source is HSE (External Clock) */
+ vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+ }
+
+ /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+ /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+ tmpreg = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24;
+ frequency = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6))/(tmpreg);
+
+ /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+ tmpreg = ((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLI2SDIVQ) + 1);
+ frequency = frequency/(tmpreg);
+ break;
+ }
+ case RCC_DCKCFGR1_SAI2SEL_1: /* External clock is the clock source for SAI2 */
+ {
+ frequency = EXTERNAL_CLOCK_VALUE;
+ break;
+ }
+#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
+ case RCC_DCKCFGR1_SAI2SEL: /* HSI or HSE is the clock source for SAI2 */
+ {
+ if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+ {
+ /* In Case the main PLL Source is HSI */
+ frequency = HSI_VALUE;
+ }
+ else
+ {
+ /* In Case the main PLL Source is HSE */
+ frequency = HSE_VALUE;
+ }
+ break;
+ }
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+ default :
+ {
+ break;
+ }
+ }
+ }
+
+ return frequency;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Exported_Functions_Group2 Extended Clock management functions
+ * @brief Extended Clock management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended clock management functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the
+ activation or deactivation of PLLI2S, PLLSAI.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enable PLLI2S.
+ * @param PLLI2SInit pointer to an RCC_PLLI2SInitTypeDef structure that
+ * contains the configuration information for the PLLI2S
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit)
+{
+ uint32_t tickstart;
+
+ /* Check for parameters */
+ assert_param(IS_RCC_PLLI2SN_VALUE(PLLI2SInit->PLLI2SN));
+ assert_param(IS_RCC_PLLI2SR_VALUE(PLLI2SInit->PLLI2SR));
+ assert_param(IS_RCC_PLLI2SQ_VALUE(PLLI2SInit->PLLI2SQ));
+#if defined(RCC_PLLI2SCFGR_PLLI2SP)
+ assert_param(IS_RCC_PLLI2SP_VALUE(PLLI2SInit->PLLI2SP));
+#endif /* RCC_PLLI2SCFGR_PLLI2SP */
+
+ /* Disable the PLLI2S */
+ __HAL_RCC_PLLI2S_DISABLE();
+
+ /* Wait till PLLI2S is disabled */
+ tickstart = HAL_GetTick();
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Configure the PLLI2S division factors */
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx)
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * PLLI2SN */
+ /* I2SQCLK = PLLI2S_VCO / PLLI2SQ */
+ /* I2SRCLK = PLLI2S_VCO / PLLI2SR */
+ __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SN, PLLI2SInit->PLLI2SQ, PLLI2SInit->PLLI2SR);
+#else
+ /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * PLLI2SN */
+ /* I2SPCLK = PLLI2S_VCO / PLLI2SP */
+ /* I2SQCLK = PLLI2S_VCO / PLLI2SQ */
+ /* I2SRCLK = PLLI2S_VCO / PLLI2SR */
+ __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SN, PLLI2SInit->PLLI2SP, PLLI2SInit->PLLI2SQ, PLLI2SInit->PLLI2SR);
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx */
+
+ /* Enable the PLLI2S */
+ __HAL_RCC_PLLI2S_ENABLE();
+
+ /* Wait till PLLI2S is ready */
+ tickstart = HAL_GetTick();
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable PLLI2S.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void)
+{
+ uint32_t tickstart;
+
+ /* Disable the PLLI2S */
+ __HAL_RCC_PLLI2S_DISABLE();
+
+ /* Wait till PLLI2S is disabled */
+ tickstart = HAL_GetTick();
+ while(READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable PLLSAI.
+ * @param PLLSAIInit pointer to an RCC_PLLSAIInitTypeDef structure that
+ * contains the configuration information for the PLLSAI
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI(RCC_PLLSAIInitTypeDef *PLLSAIInit)
+{
+ uint32_t tickstart;
+
+ /* Check for parameters */
+ assert_param(IS_RCC_PLLSAIN_VALUE(PLLSAIInit->PLLSAIN));
+ assert_param(IS_RCC_PLLSAIQ_VALUE(PLLSAIInit->PLLSAIQ));
+ assert_param(IS_RCC_PLLSAIP_VALUE(PLLSAIInit->PLLSAIP));
+#if defined(RCC_PLLSAICFGR_PLLSAIR)
+ assert_param(IS_RCC_PLLSAIR_VALUE(PLLSAIInit->PLLSAIR));
+#endif /* RCC_PLLSAICFGR_PLLSAIR */
+
+ /* Disable the PLLSAI */
+ __HAL_RCC_PLLSAI_DISABLE();
+
+ /* Wait till PLLSAI is disabled */
+ tickstart = HAL_GetTick();
+ while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Configure the PLLSAI division factors */
+#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx)
+ /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * PLLSAIN */
+ /* SAIPCLK = PLLSAI_VCO / PLLSAIP */
+ /* SAIQCLK = PLLSAI_VCO / PLLSAIQ */
+ __HAL_RCC_PLLSAI_CONFIG(PLLSAIInit->PLLSAIN, PLLSAIInit->PLLSAIP, PLLSAIInit->PLLSAIQ);
+#else
+ /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * PLLSAIN */
+ /* SAIPCLK = PLLSAI_VCO / PLLSAIP */
+ /* SAIQCLK = PLLSAI_VCO / PLLSAIQ */
+ /* SAIRCLK = PLLSAI_VCO / PLLSAIR */
+ __HAL_RCC_PLLSAI_CONFIG(PLLSAIInit->PLLSAIN, PLLSAIInit->PLLSAIP, \
+ PLLSAIInit->PLLSAIQ, PLLSAIInit->PLLSAIR);
+#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx */
+
+ /* Enable the PLLSAI */
+ __HAL_RCC_PLLSAI_ENABLE();
+
+ /* Wait till PLLSAI is ready */
+ tickstart = HAL_GetTick();
+ while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable PLLSAI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI(void)
+{
+ uint32_t tickstart;
+
+ /* Disable the PLLSAI */
+ __HAL_RCC_PLLSAI_DISABLE();
+
+ /* Wait till PLLSAI is disabled */
+ tickstart = HAL_GetTick();
+ while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE)
+ {
+ /* return in case of Timeout detected */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c
new file mode 100644
index 00000000..9d69d226
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c
@@ -0,0 +1,6255 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_tim.c
+ * @author MCD Application Team
+ * @brief TIM HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Timer (TIM) peripheral:
+ * + Time Base Initialization
+ * + Time Base Start
+ * + Time Base Start Interruption
+ * + Time Base Start DMA
+ * + Time Output Compare/PWM Initialization
+ * + Time Output Compare/PWM Channel Configuration
+ * + Time Output Compare/PWM Start
+ * + Time Output Compare/PWM Start Interruption
+ * + Time Output Compare/PWM Start DMA
+ * + Time Input Capture Initialization
+ * + Time Input Capture Channel Configuration
+ * + Time Input Capture Start
+ * + Time Input Capture Start Interruption
+ * + Time Input Capture Start DMA
+ * + Time One Pulse Initialization
+ * + Time One Pulse Channel Configuration
+ * + Time One Pulse Start
+ * + Time Encoder Interface Initialization
+ * + Time Encoder Interface Start
+ * + Time Encoder Interface Start Interruption
+ * + Time Encoder Interface Start DMA
+ * + Commutation Event configuration with Interruption and DMA
+ * + Time OCRef clear configuration
+ * + Time External Clock configuration
+ @verbatim
+ ==============================================================================
+ ##### TIMER Generic features #####
+ ==============================================================================
+ [..] The Timer features include:
+ (#) 16-bit up, down, up/down auto-reload counter.
+ (#) 16-bit programmable prescaler allowing dividing (also on the fly) the
+ counter clock frequency either by any factor between 1 and 65536.
+ (#) Up to 4 independent channels for:
+ (++) Input Capture
+ (++) Output Compare
+ (++) PWM generation (Edge and Center-aligned Mode)
+ (++) One-pulse mode output
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Initialize the TIM low level resources by implementing the following functions
+ depending from feature used :
+ (++) Time Base : HAL_TIM_Base_MspInit()
+ (++) Input Capture : HAL_TIM_IC_MspInit()
+ (++) Output Compare : HAL_TIM_OC_MspInit()
+ (++) PWM generation : HAL_TIM_PWM_MspInit()
+ (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+ (++) Encoder mode output : HAL_TIM_Encoder_MspInit()
+
+ (#) Initialize the TIM low level resources :
+ (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE();
+ (##) TIM pins configuration
+ (+++) Enable the clock for the TIM GPIOs using the following function:
+ __HAL_RCC_GPIOx_CLK_ENABLE();
+ (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+ (#) The external Clock can be configured, if needed (the default clock is the
+ internal clock from the APBx), using the following function:
+ HAL_TIM_ConfigClockSource, the clock configuration should be done before
+ any start function.
+
+ (#) Configure the TIM in the desired functioning mode using one of the
+ initialization function of this driver:
+ (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
+ (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an
+ Output Compare signal.
+ (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a
+ PWM signal.
+ (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an
+ external signal.
+ (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer
+ in One Pulse Mode.
+ (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
+
+ (#) Activate the TIM peripheral using one of the start functions depending from the feature used:
+ (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
+ (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
+ (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
+ (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
+ (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
+ (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
+
+ (#) The DMA Burst is managed with the two following functions:
+ HAL_TIM_DMABurst_WriteStart()
+ HAL_TIM_DMABurst_ReadStart()
+
+ *** Callback registration ***
+ =============================================
+
+ The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1
+ allows the user to configure dynamically the driver callbacks.
+
+ Use Function @ref HAL_TIM_RegisterCallback() to register a callback.
+ @ref HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle,
+ the Callback ID and a pointer to the user callback function.
+
+ Use function @ref HAL_TIM_UnRegisterCallback() to reset a callback to the default
+ weak function.
+ @ref HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle,
+ and the Callback ID.
+
+ These functions allow to register/unregister following callbacks:
+ (+) Base_MspInitCallback : TIM Base Msp Init Callback.
+ (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback.
+ (+) IC_MspInitCallback : TIM IC Msp Init Callback.
+ (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback.
+ (+) OC_MspInitCallback : TIM OC Msp Init Callback.
+ (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback.
+ (+) PWM_MspInitCallback : TIM PWM Msp Init Callback.
+ (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback.
+ (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback.
+ (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback.
+ (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback.
+ (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback.
+ (+) PeriodElapsedCallback : TIM Period Elapsed Callback.
+ (+) TriggerCallback : TIM Trigger Callback.
+ (+) IC_CaptureCallback : TIM Input Capture Callback.
+ (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback.
+ (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback.
+ (+) ErrorCallback : TIM Error Callback.
+ (+) CommutationCallback : TIM Commutation Callback.
+ (+) BreakCallback : TIM Break Callback.
+
+ By default, after the Init and when the state is HAL_TIM_STATE_RESET
+ all interrupt callbacks are set to the corresponding weak functions:
+ examples @ref HAL_TIM_TriggerCallback(), @ref HAL_TIM_ErrorCallback().
+
+ Exception done for MspInit and MspDeInit functions that are reset to the legacy weak
+ functionalities in the Init/DeInit only when these callbacks are null
+ (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init/DeInit
+ keep and use the user MspInit/MspDeInit callbacks (registered beforehand)
+
+ Callbacks can be registered/unregistered in HAL_TIM_STATE_READY state only.
+ Exception done MspInit/MspDeInit that can be registered/unregistered
+ in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state,
+ thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit.
+ In that case first register the MspInit/MspDeInit user callbacks
+ using @ref HAL_TIM_RegisterCallback() before calling DeInit or Init function.
+
+ When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or
+ not defined, the callback registration feature is not available and all callbacks
+ are set to the corresponding weak functions.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup TIM TIM
+ * @brief TIM HAL module driver
+ * @{
+ */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup TIM_Private_Functions
+ * @{
+ */
+/* Private function prototypes -----------------------------------------------*/
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+
+static void TIM_ITRx_SetConfig(TIM_TypeDef* TIMx, uint16_t TIM_ITRx);
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma);
+static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig);
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Functions TIM Exported Functions
+ * @{
+ */
+
+/** @defgroup TIM_Exported_Functions_Group1 Time Base functions
+ * @brief Time Base functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Base functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM base.
+ (+) De-initialize the TIM base.
+ (+) Start the Time Base.
+ (+) Stop the Time Base.
+ (+) Start the Time Base and enable interrupt.
+ (+) Stop the Time Base and disable interrupt.
+ (+) Start the Time Base and enable DMA transfer.
+ (+) Stop the Time Base and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Time base Unit according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy week callbacks */
+ TIM_ResetCallback(htim);
+
+ if(htim->Base_MspInitCallback == NULL)
+ {
+ htim->Base_MspInitCallback = HAL_TIM_Base_MspInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->Base_MspInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ HAL_TIM_Base_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Set the Time Base configuration */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Base peripheral
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if(htim->Base_MspDeInitCallback == NULL)
+ {
+ htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->Base_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_Base_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Base MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Base_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Base MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Base_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Base generation.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Change the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Base generation in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Enable the TIM Update interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ /* Disable the TIM Update interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Base generation in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length);
+
+ /* Enable the TIM Update DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group2 Time Output Compare functions
+ * @brief Time Output Compare functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Output Compare functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Output Compare.
+ (+) De-initialize the TIM Output Compare.
+ (+) Start the Time Output Compare.
+ (+) Stop the Time Output Compare.
+ (+) Start the Time Output Compare and enable interrupt.
+ (+) Stop the Time Output Compare and disable interrupt.
+ (+) Start the Time Output Compare and enable DMA transfer.
+ (+) Stop the Time Output Compare and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Output Compare according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef* htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy week callbacks */
+ TIM_ResetCallback(htim);
+
+ if(htim->OC_MspInitCallback == NULL)
+ {
+ htim->OC_MspInitCallback = HAL_TIM_OC_MspDeInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->OC_MspInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OC_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the Output Compare */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if(htim->OC_MspDeInitCallback == NULL)
+ {
+ htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->OC_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OC_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Output Compare MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Output Compare MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group3 Time PWM functions
+ * @brief Time PWM functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time PWM functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM OPWM.
+ (+) De-initialize the TIM PWM.
+ (+) Start the Time PWM.
+ (+) Stop the Time PWM.
+ (+) Start the Time PWM and enable interrupt.
+ (+) Stop the Time PWM and disable interrupt.
+ (+) Start the Time PWM and enable DMA transfer.
+ (+) Stop the Time PWM and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM PWM Time Base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy week callbacks */
+ TIM_ResetCallback(htim);
+
+ if(htim->PWM_MspInitCallback == NULL)
+ {
+ htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->PWM_MspInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_PWM_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the PWM */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if(htim->PWM_MspDeInitCallback == NULL)
+ {
+ htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->PWM_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_PWM_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM PWM MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_PWM_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM PWM MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_PWM_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the PWM signal generation.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the PWM signal generation in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM PWM signal generation in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Output Capture/Compare 3 request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM PWM signal generation in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group4 Time Input Capture functions
+ * @brief Time Input Capture functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Input Capture functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Input Capture.
+ (+) De-initialize the TIM Input Capture.
+ (+) Start the Time Input Capture.
+ (+) Stop the Time Input Capture.
+ (+) Start the Time Input Capture and enable interrupt.
+ (+) Stop the Time Input Capture and disable interrupt.
+ (+) Start the Time Input Capture and enable DMA transfer.
+ (+) Stop the Time Input Capture and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Input Capture Time base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy week callbacks */
+ TIM_ResetCallback(htim);
+
+ if(htim->IC_MspInitCallback == NULL)
+ {
+ htim->IC_MspInitCallback = HAL_TIM_IC_MspInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->IC_MspInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_IC_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the input capture */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if(htim->IC_MspDeInitCallback == NULL)
+ {
+ htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->IC_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_IC_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM INput Capture MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_IC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Input Capture MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_IC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement on in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData The destination Buffer address.
+ * @param Length The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement on in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group5 Time One Pulse functions
+ * @brief Time One Pulse functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time One Pulse functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM One Pulse.
+ (+) De-initialize the TIM One Pulse.
+ (+) Start the Time One Pulse.
+ (+) Stop the Time One Pulse.
+ (+) Start the Time One Pulse and enable interrupt.
+ (+) Stop the Time One Pulse and disable interrupt.
+ (+) Start the Time One Pulse and enable DMA transfer.
+ (+) Stop the Time One Pulse and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM One Pulse Time Base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OnePulseMode Select the One pulse mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated.
+ * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_OPM_MODE(OnePulseMode));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy week callbacks */
+ TIM_ResetCallback(htim);
+
+ if(htim->OnePulse_MspDeInitCallback == NULL)
+ {
+ htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->OnePulse_MspDeInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OnePulse_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Configure the Time base in the One Pulse Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Reset the OPM Bit */
+ htim->Instance->CR1 &= ~TIM_CR1_OPM;
+
+ /* Configure the OPM Mode */
+ htim->Instance->CR1 |= OnePulseMode;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM One Pulse
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if(htim->OnePulse_MspDeInitCallback == NULL)
+ {
+ htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->OnePulse_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_OnePulse_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM One Pulse MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OnePulse_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM One Pulse MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(OutputChannel);
+
+ /* Enable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+ No need to enable the counter, it's enabled automatically by hardware
+ (the counter starts in response to a stimulus and generate a pulse */
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel TIM Channels to be disable.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(OutputChannel);
+
+ /* Disable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Enable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+ No need to enable the counter, it's enabled automatically by hardware
+ (the counter starts in response to a stimulus and generate a pulse */
+
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(OutputChannel);
+
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(OutputChannel);
+
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+ /* Disable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group6 Time Encoder functions
+ * @brief Time Encoder functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Encoder functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Encoder.
+ (+) De-initialize the TIM Encoder.
+ (+) Start the Time Encoder.
+ (+) Stop the Time Encoder.
+ (+) Start the Time Encoder and enable interrupt.
+ (+) Stop the Time Encoder and disable interrupt.
+ (+) Start the Time Encoder and enable DMA transfer.
+ (+) Stop the Time Encoder and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Encoder Interface and create the associated handle.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig TIM Encoder Interface configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig)
+{
+ uint32_t tmpsmcr = 0;
+ uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+ assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC2Polarity));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy week callbacks */
+ TIM_ResetCallback(htim);
+
+ if(htim->Encoder_MspInitCallback == NULL)
+ {
+ htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->Encoder_MspInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_Encoder_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Reset the SMS bits */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+
+ /* Configure the Time base in the Encoder Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = htim->Instance->CCMR1;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = htim->Instance->CCER;
+
+ /* Set the encoder Mode */
+ tmpsmcr |= sConfig->EncoderMode;
+
+ /* Select the Capture Compare 1 and the Capture Compare 2 as input */
+ tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S);
+ tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8));
+
+ /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */
+ tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC);
+ tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F);
+ tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8);
+ tmpccmr1 |= (sConfig->IC1Filter << 4) | (sConfig->IC2Filter << 12);
+
+ /* Set the TI1 and the TI2 Polarities */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P);
+ tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP);
+ tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4);
+
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ /* Write to TIMx CCMR1 */
+ htim->Instance->CCMR1 = tmpccmr1;
+
+ /* Write to TIMx CCER */
+ htim->Instance->CCER = tmpccer;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Encoder interface
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if(htim->Encoder_MspDeInitCallback == NULL)
+ {
+ htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->Encoder_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_Encoder_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Encoder Interface MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Encoder_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Encoder Interface MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Encoder_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Enable the encoder interface channels */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ break;
+ }
+ }
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+ break;
+ }
+ }
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Enable the encoder interface channels */
+ /* Enable the capture compare Interrupts 1 and/or 2 */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ if(Channel == TIM_CHANNEL_1)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 1 */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ else if(Channel == TIM_CHANNEL_2)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 2 */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ else
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 1 and 2 */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @param pData1 The destination Buffer address for IC1.
+ * @param pData2 The destination Buffer address for IC2.
+ * @param Length The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((((pData1 == 0) || (pData2 == 0) )) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t )pData1, Length);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError;
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ }
+ break;
+
+ case TIM_CHANNEL_ALL:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length);
+
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ default:
+ break;
+ }
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ if(Channel == TIM_CHANNEL_1)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 1 */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ else if(Channel == TIM_CHANNEL_2)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 2 */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ else
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 1 and 2 */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management
+ * @brief IRQ handler management
+ *
+@verbatim
+ ==============================================================================
+ ##### IRQ handler management #####
+ ==============================================================================
+ [..]
+ This section provides Timer IRQ handler function.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief This function handles TIM interrupts requests.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim)
+{
+ /* Capture compare 1 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) !=RESET)
+ {
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+
+ /* Input capture event */
+ if((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00)
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->IC_CaptureCallback(htim);
+#else
+ HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ /* Output compare event */
+ else
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->OC_DelayElapsedCallback(htim);
+ htim->PWM_PulseFinishedCallback(htim);
+#else
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ }
+ /* Capture compare 2 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ /* Input capture event */
+ if((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00)
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->IC_CaptureCallback(htim);
+#else
+ HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ /* Output compare event */
+ else
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->OC_DelayElapsedCallback(htim);
+ htim->PWM_PulseFinishedCallback(htim);
+#else
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* Capture compare 3 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ /* Input capture event */
+ if((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00)
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->IC_CaptureCallback(htim);
+#else
+ HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ /* Output compare event */
+ else
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->OC_DelayElapsedCallback(htim);
+ htim->PWM_PulseFinishedCallback(htim);
+#else
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* Capture compare 4 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ /* Input capture event */
+ if((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00)
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->IC_CaptureCallback(htim);
+#else
+ HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ /* Output compare event */
+ else
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->OC_DelayElapsedCallback(htim);
+ htim->PWM_PulseFinishedCallback(htim);
+#else
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* TIM Update event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE);
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->PeriodElapsedCallback(htim);
+#else
+ HAL_TIM_PeriodElapsedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ }
+ /* TIM Break input event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK);
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->BreakCallback(htim);
+#else
+ HAL_TIMEx_BreakCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ }
+ }
+
+ /* TIM Break input event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK2) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK);
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->BreakCallback(htim);
+#else
+ HAL_TIMEx_BreakCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ }
+
+ /* TIM Trigger detection event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER);
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->TriggerCallback(htim);
+#else
+ HAL_TIM_TriggerCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ }
+ /* TIM commutation event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) !=RESET)
+ {
+ __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM);
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->CommutationCallback(htim);
+#else
+ HAL_TIMEx_CommutationCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group8 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
+ (+) Configure External Clock source.
+ (+) Configure Complementary channels, break features and dead time.
+ (+) Configure Master and the Slave synchronization.
+ (+) Configure the DMA Burst Mode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the TIM Output Compare Channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig TIM Output Compare configuration structure
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 1 in Output Compare */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 2 in Output Compare */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 3 in Output Compare */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 4 in Output Compare */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ default:
+ break;
+ }
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Input Capture Channels according to the specified
+ * parameters in the TIM_IC_InitTypeDef.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig TIM Input Capture configuration structure
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ if (Channel == TIM_CHANNEL_1)
+ {
+ /* TI1 Configuration */
+ TIM_TI1_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+ /* Set the IC1PSC value */
+ htim->Instance->CCMR1 |= sConfig->ICPrescaler;
+ }
+ else if (Channel == TIM_CHANNEL_2)
+ {
+ /* TI2 Configuration */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_TI2_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC2PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+ /* Set the IC2PSC value */
+ htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8);
+ }
+ else if (Channel == TIM_CHANNEL_3)
+ {
+ /* TI3 Configuration */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ TIM_TI3_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC3PSC Bits */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC;
+
+ /* Set the IC3PSC value */
+ htim->Instance->CCMR2 |= sConfig->ICPrescaler;
+ }
+ else
+ {
+ /* TI4 Configuration */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ TIM_TI4_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC4PSC Bits */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC;
+
+ /* Set the IC4PSC value */
+ htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8);
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM PWM channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig TIM PWM configuration structure
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ __HAL_LOCK(htim);
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+ assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ /* Configure the Channel 1 in PWM mode */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel1 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ /* Configure the Channel 2 in PWM mode */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel2 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode << 8;
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ /* Configure the Channel 3 in PWM mode */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel3 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ /* Configure the Channel 4 in PWM mode */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel4 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode << 8;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM One Pulse Channels according to the specified
+ * parameters in the TIM_OnePulse_InitTypeDef.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig TIM One Pulse configuration structure
+ * @param OutputChannel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param InputChannel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel)
+{
+ TIM_OC_InitTypeDef temp1;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_OPM_CHANNELS(OutputChannel));
+ assert_param(IS_TIM_OPM_CHANNELS(InputChannel));
+
+ if(OutputChannel != InputChannel)
+ {
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Extract the Output compare configuration from sConfig structure */
+ temp1.OCMode = sConfig->OCMode;
+ temp1.Pulse = sConfig->Pulse;
+ temp1.OCPolarity = sConfig->OCPolarity;
+ temp1.OCNPolarity = sConfig->OCNPolarity;
+ temp1.OCIdleState = sConfig->OCIdleState;
+ temp1.OCNIdleState = sConfig->OCNIdleState;
+
+ switch (OutputChannel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ TIM_OC1_SetConfig(htim->Instance, &temp1);
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_OC2_SetConfig(htim->Instance, &temp1);
+ }
+ break;
+ default:
+ break;
+ }
+ switch (InputChannel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity,
+ sConfig->ICSelection, sConfig->ICFilter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+ /* Select the Trigger source */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI1FP1;
+
+ /* Select the Slave Mode */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity,
+ sConfig->ICSelection, sConfig->ICFilter);
+
+ /* Reset the IC2PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+ /* Select the Trigger source */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI2FP2;
+
+ /* Select the Slave Mode */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param BurstBaseAddress TIM Base address from when the DMA will starts the Data write.
+ * This parameters can be on of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_DCR
+ * @param BurstRequestSrc TIM DMA Request sources.
+ * This parameters can be on of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer The Buffer address.
+ * @param BurstLength DMA Burst length. This parameter can be one value
+ * between TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+ uint32_t* BurstBuffer, uint32_t BurstLength)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+ assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((BurstBuffer == 0 ) && (BurstLength > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = HAL_TIMEx_DMACommutationCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ default:
+ break;
+ }
+ /* configure the DMA Burst Mode */
+ htim->Instance->DCR = BurstBaseAddress | BurstLength;
+
+ /* Enable the TIM DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM DMA Burst mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param BurstRequestSrc TIM DMA Request sources to disable
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+ /* Abort the DMA transfer (at least disable the DMA channel) */
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param BurstBaseAddress TIM Base address from when the DMA will starts the Data read.
+ * This parameters can be on of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_DCR
+ * @param BurstRequestSrc TIM DMA Request sources.
+ * This parameters can be on of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer The Buffer address.
+ * @param BurstLength DMA Burst length. This parameter can be one value
+ * between TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+ uint32_t *BurstBuffer, uint32_t BurstLength)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+ assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((BurstBuffer == 0 ) && (BurstLength > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = HAL_TIMEx_DMACommutationCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* configure the DMA Burst Mode */
+ htim->Instance->DCR = BurstBaseAddress | BurstLength;
+
+ /* Enable the TIM DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop the DMA burst reading
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param BurstRequestSrc TIM DMA Request sources to disable.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+ /* Abort the DMA transfer (at least disable the DMA channel) */
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Generate a software event
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param EventSource specifies the event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source
+ * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source
+ * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source
+ * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source
+ * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source
+ * @arg TIM_EVENTSOURCE_COM: Timer COM event source
+ * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source
+ * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source
+ * @arg TIM_EVENTSOURCE_BREAK2: Timer Break2 event source
+ * @note TIM6 and TIM7 can only generate an update event.
+ * @note TIM_EVENTSOURCE_COM, TIM_EVENTSOURCE_BREAK and TIM_EVENTSOURCE_BREAK2 are used only with TIM1 and TIM8.
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_EVENT_SOURCE(EventSource));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ /* Change the TIM state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Set the event sources */
+ htim->Instance->EGR = EventSource;
+
+ /* Change the TIM state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the OCRef clear feature
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that
+ * contains the OCREF clear feature and parameters for the TIM peripheral.
+ * @param Channel specifies the TIM Channel.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ if(sClearInputConfig->ClearInputSource == TIM_CLEARINPUTSOURCE_ETR)
+ {
+ assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
+ assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
+ assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
+
+ TIM_ETR_SetConfig(htim->Instance,
+ sClearInputConfig->ClearInputPrescaler,
+ sClearInputConfig->ClearInputPolarity,
+ sClearInputConfig->ClearInputFilter);
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 2 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 2 */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 3 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 3 */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 4 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 4 */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the clock source to be used
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that
+ * contains the clock source information for the TIM peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig)
+{
+ uint32_t tmpsmcr = 0;
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource));
+
+ /* Reset the SMS, TS, ECE, ETPS and ETRF bits */
+ tmpsmcr = htim->Instance->SMCR;
+ tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+ htim->Instance->SMCR = tmpsmcr;
+
+ switch (sClockSourceConfig->ClockSource)
+ {
+ case TIM_CLOCKSOURCE_INTERNAL:
+ {
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ /* Disable slave mode to clock the prescaler directly with the internal clock */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_ETRMODE1:
+ {
+ assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+ /* Configure the ETR Clock source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sClockSourceConfig->ClockPrescaler,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+ /* Reset the SMS and TS Bits */
+ tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+ /* Select the External clock mode1 and the ETRF trigger */
+ tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1);
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_ETRMODE2:
+ {
+ assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ /* Configure the ETR Clock source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sClockSourceConfig->ClockPrescaler,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ /* Enable the External clock mode2 */
+ htim->Instance->SMCR |= TIM_SMCR_ECE;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_TI1:
+ {
+ assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+ /* Check TI1 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1);
+ }
+ break;
+ case TIM_CLOCKSOURCE_TI2:
+ {
+ assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+ /* Check TI1 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI2_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2);
+ }
+ break;
+ case TIM_CLOCKSOURCE_TI1ED:
+ {
+ assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+ /* Check TI1 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR0:
+ {
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR0);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR1:
+ {
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR1);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR2:
+ {
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR2);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR3:
+ {
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR3);
+ }
+ break;
+
+ default:
+ break;
+ }
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Selects the signal connected to the TI1 input: direct from CH1_input
+ * or a XOR combination between CH1_input, CH2_input & CH3_input
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param TI1_Selection Indicate whether or not channel 1 is connected to the
+ * output of a XOR gate.
+ * This parameter can be one of the following values:
+ * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input
+ * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3
+ * pins are connected to the TI1 input (XOR combination)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection)
+{
+ uint32_t tmpcr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TI1SELECTION(TI1_Selection));
+
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = htim->Instance->CR2;
+
+ /* Reset the TI1 selection */
+ tmpcr2 &= ~TIM_CR2_TI1S;
+
+ /* Set the TI1 selection */
+ tmpcr2 |= TI1_Selection;
+
+ /* Write to TIMxCR2 */
+ htim->Instance->CR2 = tmpcr2;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in Slave mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that
+ * contains the selected trigger (internal trigger input, filtered
+ * timer input or external trigger input) and the ) and the Slave
+ * mode (Disable, Reset, Gated, Trigger, External clock mode 1).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ uint32_t tmpsmcr = 0;
+ uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+ assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Reset the Trigger Selection Bits */
+ tmpsmcr &= ~TIM_SMCR_TS;
+ /* Set the Input Trigger source */
+ tmpsmcr |= sSlaveConfig->InputTrigger;
+
+ /* Reset the slave mode Bits */
+ tmpsmcr &= ~TIM_SMCR_SMS;
+ /* Set the slave mode */
+ tmpsmcr |= sSlaveConfig->SlaveMode;
+
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ /* Configure the trigger prescaler, filter, and polarity */
+ switch (sSlaveConfig->InputTrigger)
+ {
+ case TIM_TS_ETRF:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+ /* Configure the ETR Trigger source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sSlaveConfig->TriggerPrescaler,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_TI1F_ED:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ tmpccer = htim->Instance->CCER;
+ htim->Instance->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = htim->Instance->CCMR1;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ htim->Instance->CCMR1 = tmpccmr1;
+ htim->Instance->CCER = tmpccer;
+
+ }
+ break;
+
+ case TIM_TS_TI1FP1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI1 Filter and Polarity */
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_TI2FP2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI2 Filter and Polarity */
+ TIM_TI2_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_ITR0:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR1:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR2:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR3:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in Slave mode in interrupt mode
+ * @param htim TIM handle.
+ * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that
+ * contains the selected trigger (internal trigger input, filtered
+ * timer input or external trigger input) and the ) and the Slave
+ * mode (Disable, Reset, Gated, Trigger, External clock mode 1).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+ assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
+
+ /* Enable Trigger Interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER);
+
+ /* Disable Trigger DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read the captured value from Capture Compare unit
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channels to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval Captured value
+ */
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpreg = 0;
+
+ __HAL_LOCK(htim);
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Return the capture 1 value */
+ tmpreg = htim->Instance->CCR1;
+
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Return the capture 2 value */
+ tmpreg = htim->Instance->CCR2;
+
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ /* Return the capture 3 value */
+ tmpreg = htim->Instance->CCR3;
+
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ /* Return the capture 4 value */
+ tmpreg = htim->Instance->CCR4;
+
+ break;
+ }
+
+ default:
+ break;
+ }
+
+ __HAL_UNLOCK(htim);
+ return tmpreg;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
+ * @brief TIM Callbacks functions
+ *
+@verbatim
+ ==============================================================================
+ ##### TIM Callbacks functions #####
+ ==============================================================================
+ [..]
+ This section provides TIM callback functions:
+ (+) Timer Period elapsed callback
+ (+) Timer Output Compare callback
+ (+) Timer Input capture callback
+ (+) Timer Trigger callback
+ (+) Timer Error callback
+ (+) Timer_RegisterCallback
+ (+) Timer_UnRegisterCallback
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Period elapsed callback in non blocking mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_PeriodElapsedCallback could be implemented in the user file
+ */
+
+}
+/**
+ * @brief Output Compare callback in non blocking mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file
+ */
+}
+/**
+ * @brief Input Capture callback in non blocking mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_IC_CaptureCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief PWM Pulse finished callback in non blocking mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Hall Trigger detection callback in non blocking mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_TriggerCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Timer error callback in non blocking mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_ErrorCallback could be implemented in the user file
+ */
+}
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+/**
+ * @brief Register a User TIM callback to be used instead of the weak predefined callback
+ * @param htim tim handle
+ * @param CallbackID ID of the callback to be registered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID
+ * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID
+ * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID
+ * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID
+ * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID
+ * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID
+ * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID
+ * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID
+ * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID
+ * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID
+ * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID
+ * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID
+ * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID
+ * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID
+ * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID
+ * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID
+ * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID
+ * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID
+ * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID
+ * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID
+ * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID
+ * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID
+ * @param pCallback pointer to the callback function
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, pTIM_CallbackTypeDef pCallback)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if(pCallback == NULL)
+ {
+ return HAL_ERROR;
+ }
+ /* Process locked */
+ __HAL_LOCK(htim);
+
+ if(htim->State == HAL_TIM_STATE_READY)
+ {
+ switch (CallbackID)
+ {
+ case HAL_TIM_BASE_MSPINIT_CB_ID :
+ htim->Base_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_BASE_MSPDEINIT_CB_ID :
+ htim->Base_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_IC_MSPINIT_CB_ID :
+ htim->IC_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_IC_MSPDEINIT_CB_ID :
+ htim->IC_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_OC_MSPINIT_CB_ID :
+ htim->OC_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_OC_MSPDEINIT_CB_ID :
+ htim->OC_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_PWM_MSPINIT_CB_ID :
+ htim->PWM_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_PWM_MSPDEINIT_CB_ID :
+ htim->PWM_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
+ htim->OnePulse_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
+ htim->OnePulse_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ENCODER_MSPINIT_CB_ID :
+ htim->Encoder_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
+ htim->Encoder_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
+ htim->HallSensor_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
+ htim->HallSensor_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_PERIOD_ELAPSED_CB_ID :
+ htim->PeriodElapsedCallback = pCallback;
+ break;
+
+ case HAL_TIM_TRIGGER_CB_ID :
+ htim->TriggerCallback = pCallback;
+ break;
+
+ case HAL_TIM_IC_CAPTURE_CB_ID :
+ htim->IC_CaptureCallback = pCallback;
+ break;
+
+ case HAL_TIM_OC_DELAY_ELAPSED_CB_ID :
+ htim->OC_DelayElapsedCallback = pCallback;
+ break;
+
+ case HAL_TIM_PWM_PULSE_FINISHED_CB_ID :
+ htim->PWM_PulseFinishedCallback = pCallback;
+ break;
+
+ case HAL_TIM_ERROR_CB_ID :
+ htim->ErrorCallback = pCallback;
+ break;
+
+ case HAL_TIM_COMMUTATION_CB_ID :
+ htim->CommutationCallback = pCallback;
+ break;
+
+ case HAL_TIM_BREAK_CB_ID :
+ htim->BreakCallback = pCallback;
+ break;
+
+ default :
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ switch (CallbackID)
+ {
+ case HAL_TIM_BASE_MSPINIT_CB_ID :
+ htim->Base_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_BASE_MSPDEINIT_CB_ID :
+ htim->Base_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_IC_MSPINIT_CB_ID :
+ htim->IC_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_IC_MSPDEINIT_CB_ID :
+ htim->IC_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_OC_MSPINIT_CB_ID :
+ htim->OC_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_OC_MSPDEINIT_CB_ID :
+ htim->OC_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_PWM_MSPINIT_CB_ID :
+ htim->PWM_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_PWM_MSPDEINIT_CB_ID :
+ htim->PWM_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
+ htim->OnePulse_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
+ htim->OnePulse_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ENCODER_MSPINIT_CB_ID :
+ htim->Encoder_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
+ htim->Encoder_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
+ htim->HallSensor_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
+ htim->HallSensor_MspDeInitCallback = pCallback;
+ break;
+
+ default :
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return status;
+}
+
+/**
+ * @brief Unregister a TIM callback
+ * TIM callback is redirected to the weak predefined callback
+ * @param htim tim handle
+ * @param CallbackID ID of the callback to be unregistered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID
+ * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID
+ * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID
+ * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID
+ * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID
+ * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID
+ * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID
+ * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID
+ * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID
+ * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID
+ * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID
+ * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID
+ * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID
+ * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID
+ * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID
+ * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID
+ * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID
+ * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID
+ * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID
+ * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID
+ * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID
+ * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(htim);
+
+ if(htim->State == HAL_TIM_STATE_READY)
+ {
+ switch (CallbackID)
+ {
+ case HAL_TIM_BASE_MSPINIT_CB_ID :
+ htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */
+ break;
+
+ case HAL_TIM_BASE_MSPDEINIT_CB_ID :
+ htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_IC_MSPINIT_CB_ID :
+ htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */
+ break;
+
+ case HAL_TIM_IC_MSPDEINIT_CB_ID :
+ htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_OC_MSPINIT_CB_ID :
+ htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */
+ break;
+
+ case HAL_TIM_OC_MSPDEINIT_CB_ID :
+ htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_PWM_MSPINIT_CB_ID :
+ htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */
+ break;
+
+ case HAL_TIM_PWM_MSPDEINIT_CB_ID :
+ htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
+ htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
+ htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_ENCODER_MSPINIT_CB_ID :
+ htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */
+ break;
+
+ case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
+ htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
+ htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
+ htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_PERIOD_ELAPSED_CB_ID :
+ htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak Period Elapsed Callback */
+ break;
+
+ case HAL_TIM_TRIGGER_CB_ID :
+ htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak Trigger Callback */
+ break;
+
+ case HAL_TIM_IC_CAPTURE_CB_ID :
+ htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC Capture Callback */
+ break;
+
+ case HAL_TIM_OC_DELAY_ELAPSED_CB_ID :
+ htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC Delay Elapsed Callback */
+ break;
+
+ case HAL_TIM_PWM_PULSE_FINISHED_CB_ID :
+ htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM Pulse Finished Callback */
+ break;
+
+ case HAL_TIM_ERROR_CB_ID :
+ htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak Error Callback */
+ break;
+
+ case HAL_TIM_COMMUTATION_CB_ID :
+ htim->CommutationCallback = HAL_TIMEx_CommutationCallback; /* Legacy weak Commutation Callback */
+ break;
+
+ case HAL_TIM_BREAK_CB_ID :
+ htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak Break Callback */
+ break;
+
+ default :
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ switch (CallbackID)
+ {
+ case HAL_TIM_BASE_MSPINIT_CB_ID :
+ htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */
+ break;
+
+ case HAL_TIM_BASE_MSPDEINIT_CB_ID :
+ htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_IC_MSPINIT_CB_ID :
+ htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */
+ break;
+
+ case HAL_TIM_IC_MSPDEINIT_CB_ID :
+ htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_OC_MSPINIT_CB_ID :
+ htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */
+ break;
+
+ case HAL_TIM_OC_MSPDEINIT_CB_ID :
+ htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_PWM_MSPINIT_CB_ID :
+ htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */
+ break;
+
+ case HAL_TIM_PWM_MSPDEINIT_CB_ID :
+ htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
+ htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
+ htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_ENCODER_MSPINIT_CB_ID :
+ htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */
+ break;
+
+ case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
+ htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
+ htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
+ htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */
+ break;
+
+ default :
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return status;
+}
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group10 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the TIM Base state
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM OC state
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM PWM state
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM Input Capture state
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM One Pulse Mode state
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM Encoder Mode state
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief TIM DMA error callback
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void HAL_TIM_DMAError(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->ErrorCallback(htim);
+#else
+ HAL_TIM_ErrorCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief TIM DMA Delay Pulse complete callback.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void HAL_TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->PWM_PulseFinishedCallback(htim);
+#else
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+/**
+ * @brief TIM DMA Capture complete callback.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void HAL_TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ }
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->IC_CaptureCallback(htim);
+#else
+ HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+
+}
+
+/**
+ * @brief TIM DMA Period Elapse complete callback.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->PeriodElapsedCallback(htim);
+#else
+ HAL_TIM_PeriodElapsedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief TIM DMA Trigger callback.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->TriggerCallback(htim);
+#else
+ HAL_TIM_TriggerCallback(htim);
+ #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief Time Base configuration
+ * @param TIMx TIM peripheral
+ * @param Structure pointer on TIM Time Base required parameters
+ * @retval None
+ */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure)
+{
+ uint32_t tmpcr1 = 0;
+ tmpcr1 = TIMx->CR1;
+
+ /* Set TIM Time Base Unit parameters ---------------------------------------*/
+ if(IS_TIM_CC3_INSTANCE(TIMx) != RESET)
+ {
+ /* Select the Counter Mode */
+ tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS);
+ tmpcr1 |= Structure->CounterMode;
+ }
+
+ if(IS_TIM_CC1_INSTANCE(TIMx) != RESET)
+ {
+ /* Set the clock division */
+ tmpcr1 &= ~TIM_CR1_CKD;
+ tmpcr1 |= (uint32_t)Structure->ClockDivision;
+ }
+
+ /* Set the auto-reload preload */
+ MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload);
+
+ TIMx->CR1 = tmpcr1;
+
+ /* Set the Auto-reload value */
+ TIMx->ARR = (uint32_t)Structure->Period ;
+
+ /* Set the Prescaler value */
+ TIMx->PSC = (uint32_t)Structure->Prescaler;
+
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ /* Set the Repetition Counter value */
+ TIMx->RCR = Structure->RepetitionCounter;
+ }
+
+ /* Generate an update event to reload the Prescaler
+ and the repetition counter(only for TIM1 and TIM8) value immediately */
+ TIMx->EGR = TIM_EGR_UG;
+}
+
+/**
+ * @brief Time Output Compare 1 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The output configuration structure
+ * @retval None
+ */
+void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0;
+ uint32_t tmpccer = 0;
+ uint32_t tmpcr2 = 0;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= ~TIM_CCMR1_OC1M;
+ tmpccmrx &= ~TIM_CCMR1_CC1S;
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC1P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= OC_Config->OCPolarity;
+
+
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC1NP;
+ /* Set the Output N Polarity */
+ tmpccer |= OC_Config->OCNPolarity;
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC1NE;
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS1;
+ tmpcr2 &= ~TIM_CR2_OIS1N;
+ /* Set the Output Idle state */
+ tmpcr2 |= OC_Config->OCIdleState;
+ /* Set the Output N Idle state */
+ tmpcr2 |= OC_Config->OCNIdleState;
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR1 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Output Compare 2 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The output configuration structure
+ * @retval None
+ */
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0;
+ uint32_t tmpccer = 0;
+ uint32_t tmpcr2 = 0;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR1_OC2M;
+ tmpccmrx &= ~TIM_CCMR1_CC2S;
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC2P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 4);
+
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC2NP;
+ /* Set the Output N Polarity */
+ tmpccer |= (OC_Config->OCNPolarity << 4);
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC2NE;
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS2;
+ tmpcr2 &= ~TIM_CR2_OIS2N;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 2);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (OC_Config->OCNIdleState << 2);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR2 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Output Compare 3 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The output configuration structure
+ * @retval None
+ */
+void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0;
+ uint32_t tmpccer = 0;
+ uint32_t tmpcr2 = 0;
+
+ /* Disable the Channel 3: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC3E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR2_OC3M;
+ tmpccmrx &= ~TIM_CCMR2_CC3S;
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC3P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 8);
+
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC3NP;
+ /* Set the Output N Polarity */
+ tmpccer |= (OC_Config->OCNPolarity << 8);
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC3NE;
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS3;
+ tmpcr2 &= ~TIM_CR2_OIS3N;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 4);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (OC_Config->OCNIdleState << 4);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR3 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Output Compare 4 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The output configuration structure
+ * @retval None
+ */
+void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0;
+ uint32_t tmpccer = 0;
+ uint32_t tmpcr2 = 0;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC4E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR2_OC4M;
+ tmpccmrx &= ~TIM_CCMR2_CC4S;
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC4P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 12);
+
+ /*if((TIMx == TIM1) || (TIMx == TIM8))*/
+ if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+ {
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS4;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 6);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR4 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Output Compare 4 configuration
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sSlaveConfig The slave configuration structure
+ * @retval None
+ */
+static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ uint32_t tmpsmcr = 0;
+ uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Reset the Trigger Selection Bits */
+ tmpsmcr &= ~TIM_SMCR_TS;
+ /* Set the Input Trigger source */
+ tmpsmcr |= sSlaveConfig->InputTrigger;
+
+ /* Reset the slave mode Bits */
+ tmpsmcr &= ~TIM_SMCR_SMS;
+ /* Set the slave mode */
+ tmpsmcr |= sSlaveConfig->SlaveMode;
+
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ /* Configure the trigger prescaler, filter, and polarity */
+ switch (sSlaveConfig->InputTrigger)
+ {
+ case TIM_TS_ETRF:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+ /* Configure the ETR Trigger source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sSlaveConfig->TriggerPrescaler,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_TI1F_ED:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ tmpccer = htim->Instance->CCER;
+ htim->Instance->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = htim->Instance->CCMR1;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ htim->Instance->CCMR1 = tmpccmr1;
+ htim->Instance->CCER = tmpccer;
+
+ }
+ break;
+
+ case TIM_TS_TI1FP1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI1 Filter and Polarity */
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_TI2FP2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI2 Filter and Polarity */
+ TIM_TI2_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_ITR0:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR1:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR2:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR3:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief Configure the TI1 as Input.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2.
+ * @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1
+ * (on channel2 path) is used as the input signal. Therefore CCMR1 must be
+ * protected against un-initialized filter and polarity values.
+ */
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ if(IS_TIM_CC2_INSTANCE(TIMx) != RESET)
+ {
+ tmpccmr1 &= ~TIM_CCMR1_CC1S;
+ tmpccmr1 |= TIM_ICSelection;
+ }
+ else
+ {
+ tmpccmr1 |= TIM_CCMR1_CC1S_0;
+ }
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= ((TIM_ICFilter << 4) & TIM_CCMR1_IC1F);
+
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+ tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP));
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the Polarity and Filter for TI1.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ tmpccer = TIMx->CCER;
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= (TIM_ICFilter << 4);
+
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+ tmpccer |= TIM_ICPolarity;
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI2 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1.
+ * @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2
+ * (on channel1 path) is used as the input signal. Therefore CCMR1 must be
+ * protected against un-initialized filter and polarity values.
+ */
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr1 &= ~TIM_CCMR1_CC2S;
+ tmpccmr1 |= (TIM_ICSelection << 8);
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC2F;
+ tmpccmr1 |= ((TIM_ICFilter << 12) & TIM_CCMR1_IC2F);
+
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+ tmpccer |= ((TIM_ICPolarity << 4) & (TIM_CCER_CC2P | TIM_CCER_CC2NP));
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the Polarity and Filter for TI2.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+uint32_t tmpccmr1 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC2F;
+ tmpccmr1 |= (TIM_ICFilter << 12);
+
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+ tmpccer |= (TIM_ICPolarity << 4);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI3 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4.
+ * @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4
+ * (on channel1 path) is used as the input signal. Therefore CCMR2 must be
+ * protected against un-initialized filter and polarity values.
+ */
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr2 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Disable the Channel 3: Reset the CC3E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC3E;
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr2 &= ~TIM_CCMR2_CC3S;
+ tmpccmr2 |= TIM_ICSelection;
+
+ /* Set the filter */
+ tmpccmr2 &= ~TIM_CCMR2_IC3F;
+ tmpccmr2 |= ((TIM_ICFilter << 4) & TIM_CCMR2_IC3F);
+
+ /* Select the Polarity and set the CC3E Bit */
+ tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP);
+ tmpccer |= ((TIM_ICPolarity << 8) & (TIM_CCER_CC3P | TIM_CCER_CC3NP));
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI4 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3.
+ * @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3
+ * (on channel1 path) is used as the input signal. Therefore CCMR2 must be
+ * protected against un-initialized filter and polarity values.
+ */
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr2 = 0;
+ uint32_t tmpccer = 0;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC4E;
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr2 &= ~TIM_CCMR2_CC4S;
+ tmpccmr2 |= (TIM_ICSelection << 8);
+
+ /* Set the filter */
+ tmpccmr2 &= ~TIM_CCMR2_IC4F;
+ tmpccmr2 |= ((TIM_ICFilter << 12) & TIM_CCMR2_IC4F);
+
+ /* Select the Polarity and set the CC4E Bit */
+ tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP);
+ tmpccer |= ((TIM_ICPolarity << 12) & (TIM_CCER_CC4P | TIM_CCER_CC4NP));
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer ;
+}
+
+/**
+ * @brief Selects the Input Trigger source
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ITRx The Input Trigger source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal Trigger 0
+ * @arg TIM_TS_ITR1: Internal Trigger 1
+ * @arg TIM_TS_ITR2: Internal Trigger 2
+ * @arg TIM_TS_ITR3: Internal Trigger 3
+ * @arg TIM_TS_TI1F_ED: TI1 Edge Detector
+ * @arg TIM_TS_TI1FP1: Filtered Timer Input 1
+ * @arg TIM_TS_TI2FP2: Filtered Timer Input 2
+ * @arg TIM_TS_ETRF: External Trigger input
+ * @retval None
+ */
+static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint16_t TIM_ITRx)
+{
+ uint32_t tmpsmcr = 0;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+ /* Reset the TS Bits */
+ tmpsmcr &= ~TIM_SMCR_TS;
+ /* Set the Input Trigger source and the slave mode*/
+ tmpsmcr |= TIM_ITRx | TIM_SLAVEMODE_EXTERNAL1;
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Configures the TIMx External Trigger (ETR).
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ExtTRGPrescaler The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPSC_DIV1: ETRP Prescaler OFF.
+ * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
+ * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
+ * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
+ * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
+ * @param ExtTRGFilter External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
+ uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter)
+{
+ uint32_t tmpsmcr = 0;
+
+ tmpsmcr = TIMx->SMCR;
+
+ /* Reset the ETR Bits */
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+
+ /* Set the Prescaler, the Filter value and the Polarity */
+ tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8)));
+
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel x.
+ * @param TIMx to select the TIM peripheral
+ * @param Channel specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @arg TIM_Channel_4: TIM Channel 4
+ * @param ChannelState specifies the TIM Channel CCxE bit new state.
+ * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_Disable.
+ * @retval None
+ */
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState)
+{
+ uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(TIMx));
+ assert_param(IS_TIM_CHANNELS(Channel));
+
+ tmp = TIM_CCER_CC1E << Channel;
+
+ /* Reset the CCxE Bit */
+ TIMx->CCER &= ~tmp;
+
+ /* Set or reset the CCxE Bit */
+ TIMx->CCER |= (uint32_t)(ChannelState << Channel);
+}
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+/**
+ * @brief Reset interrupt callbacks to the legacy week callbacks.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+void TIM_ResetCallback(TIM_HandleTypeDef *htim)
+{
+ /* Reset the TIM callback to the legacy weak callbacks */
+ htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak PeriodElapsedCallback */
+ htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak TriggerCallback */
+ htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC_CaptureCallback */
+ htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC_DelayElapsedCallback */
+ htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM_PulseFinishedCallback */
+ htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak ErrorCallback */
+ htim->CommutationCallback = HAL_TIMEx_CommutationCallback; /* Legacy weak CommutationCallback */
+ htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak BreakCallback */
+}
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c
new file mode 100644
index 00000000..4fdcc9ee
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c
@@ -0,0 +1,2599 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_tim_ex.c
+ * @author MCD Application Team
+ * @brief TIM HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Timer extension peripheral:
+ * + Time Hall Sensor Interface Initialization
+ * + Time Hall Sensor Interface Start
+ * + Time Complementary signal bread and dead time configuration
+ * + Time Master and Slave synchronization configuration
+ * + Time Output Compare/PWM Channel Configuration (for channels 5 and 6)
+ * + Time OCRef clear configuration
+ * + Timer remapping capabilities configuration
+ @verbatim
+ ==============================================================================
+ ##### TIMER Extended features #####
+ ==============================================================================
+ [..]
+ The Timer Extension features include:
+ (#) Complementary outputs with programmable dead-time for :
+ (++) Input Capture
+ (++) Output Compare
+ (++) PWM generation (Edge and Center-aligned Mode)
+ (++) One-pulse mode output
+ (#) Synchronization circuit to control the timer with external signals and to
+ interconnect several timers together.
+ (#) Break input to put the timer output signals in reset state or in a known state.
+ (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for
+ positioning purposes
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Initialize the TIM low level resources by implementing the following functions
+ depending from feature used :
+ (++) Complementary Output Compare : HAL_TIM_OC_MspInit()
+ (++) Complementary PWM generation : HAL_TIM_PWM_MspInit()
+ (++) Complementary One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+ (++) Hall Sensor output : HAL_TIM_HallSensor_MspInit()
+
+ (#) Initialize the TIM low level resources :
+ (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE();
+ (##) TIM pins configuration
+ (+++) Enable the clock for the TIM GPIOs using the following function:
+ __HAL_RCC_GPIOx_CLK_ENABLE();
+ (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+ (#) The external Clock can be configured, if needed (the default clock is the
+ internal clock from the APBx), using the following function:
+ HAL_TIM_ConfigClockSource, the clock configuration should be done before
+ any start function.
+
+ (#) Configure the TIM in the desired functioning mode using one of the
+ initialization function of this driver:
+ (++) HAL_TIMEx_HallSensor_Init and HAL_TIMEx_ConfigCommutationEvent: to use the
+ Timer Hall Sensor Interface and the commutation event with the corresponding
+ Interrupt and DMA request if needed (Note that One Timer is used to interface
+ with the Hall sensor Interface and another Timer should be used to use
+ the commutation event).
+
+ (#) Activate the TIM peripheral using one of the start functions:
+ (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OC_Start_IT()
+ (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT()
+ (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT()
+ (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT().
+
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup TIMEx TIMEx
+ * @brief TIM Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define BDTR_BKF_SHIFT (16)
+#define BDTR_BK2F_SHIFT (20)
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup TIMEx_Private_Functions
+ * @{
+ */
+static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState);
+static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+/**
+ * @}
+ */
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup TIMEx_Exported_Functions TIMEx Exported Functions
+ * @{
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
+ * @brief Timer Hall Sensor functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Hall Sensor functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure TIM HAL Sensor.
+ (+) De-initialize TIM HAL Sensor.
+ (+) Start the Hall Sensor Interface.
+ (+) Stop the Hall Sensor Interface.
+ (+) Start the Hall Sensor Interface and enable interrupts.
+ (+) Stop the Hall Sensor Interface and disable interrupts.
+ (+) Start the Hall Sensor Interface and enable DMA transfers.
+ (+) Stop the Hall Sensor Interface and disable DMA transfers.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Hall Sensor Interface and create the associated handle.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sConfig TIM Hall Sensor configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig)
+{
+ TIM_OC_InitTypeDef OC_Config;
+
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy week callbacks */
+ TIM_ResetCallback(htim);
+
+ if(htim->HallSensor_MspInitCallback == NULL)
+ {
+ htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->HallSensor_MspInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIMEx_HallSensor_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Configure the Time base in the Encoder Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */
+ TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+ /* Set the IC1PSC value */
+ htim->Instance->CCMR1 |= sConfig->IC1Prescaler;
+
+ /* Enable the Hall sensor interface (XOR function of the three inputs) */
+ htim->Instance->CR2 |= TIM_CR2_TI1S;
+
+ /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI1F_ED;
+
+ /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_RESET;
+
+ /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/
+ OC_Config.OCFastMode = TIM_OCFAST_DISABLE;
+ OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET;
+ OC_Config.OCMode = TIM_OCMODE_PWM2;
+ OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+ OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+ OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH;
+ OC_Config.Pulse = sConfig->Commutation_Delay;
+
+ TIM_OC2_SetConfig(htim->Instance, &OC_Config);
+
+ /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2
+ register to 101 */
+ htim->Instance->CR2 &= ~TIM_CR2_MMS;
+ htim->Instance->CR2 |= TIM_TRGO_OC2REF;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Hall Sensor interface
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if(htim->HallSensor_MspDeInitCallback == NULL)
+ {
+ htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->HallSensor_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIMEx_HallSensor_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Hall Sensor MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Hall Sensor MSP.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Enable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall sensor Interface.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1, 2 and 3
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Enable the capture compare Interrupts 1 event */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall Sensor Interface in interrupt mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts event */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param pData The destination Buffer address.
+ * @param Length The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ /* Enable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Set the DMA Input Capture 1 Callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream for Capture 1*/
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
+
+ /* Enable the capture compare 1 Interrupt */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall Sensor Interface in DMA mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1
+ (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+
+ /* Disable the capture compare Interrupts 1 event */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
+ * @brief Timer Complementary Output Compare functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary Output Compare functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary Output Compare/PWM.
+ (+) Stop the Complementary Output Compare/PWM.
+ (+) Start the Complementary Output Compare/PWM and enable interrupts.
+ (+) Stop the Complementary Output Compare/PWM and disable interrupts.
+ (+) Start the Complementary Output Compare/PWM and enable DMA transfers.
+ (+) Stop the Complementary Output Compare/PWM and disable DMA transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the TIM Output Compare signal generation on the complementary
+ * output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation on the complementary
+ * output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in interrupt mode
+ * on the complementary output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the TIM Break interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in interrupt mode
+ * on the complementary output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the TIM Break interrupt (only if no more channel is active) */
+ tmpccer = htim->Instance->CCER;
+ if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
+ {
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+ }
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in DMA mode
+ * on the complementary output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+{
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in DMA mode
+ * on the complementary output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
+ * @brief Timer Complementary PWM functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary PWM functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary PWM.
+ (+) Stop the Complementary PWM.
+ (+) Start the Complementary PWM and enable interrupts.
+ (+) Stop the Complementary PWM and disable interrupts.
+ (+) Start the Complementary PWM and enable DMA transfers.
+ (+) Stop the Complementary PWM and disable DMA transfers.
+ (+) Start the Complementary Input Capture measurement.
+ (+) Stop the Complementary Input Capture.
+ (+) Start the Complementary Input Capture and enable interrupts.
+ (+) Stop the Complementary Input Capture and disable interrupts.
+ (+) Start the Complementary Input Capture and enable DMA transfers.
+ (+) Stop the Complementary Input Capture and disable DMA transfers.
+ (+) Start the Complementary One Pulse generation.
+ (+) Stop the Complementary One Pulse.
+ (+) Start the Complementary One Pulse and enable interrupts.
+ (+) Stop the Complementary One Pulse and disable interrupts.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the PWM signal generation on the complementary output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation on the complementary output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the PWM signal generation in interrupt mode on the
+ * complementary output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the TIM Break interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation in interrupt mode on the
+ * complementary output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the TIM Break interrupt (only if no more channel is active) */
+ tmpccer = htim->Instance->CCER;
+ if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
+ {
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+ }
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM PWM signal generation in DMA mode on the
+ * complementary output
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0 ) && (Length > 0))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM PWM signal generation in DMA mode on the complementary
+ * output
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Channel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
+ * @brief Timer Complementary One Pulse functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary One Pulse functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary One Pulse generation.
+ (+) Stop the Complementary One Pulse.
+ (+) Start the Complementary One Pulse and enable interrupts.
+ (+) Stop the Complementary One Pulse and disable interrupts.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the TIM One Pulse signal generation on the complemetary
+ * output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Enable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation on the complementary
+ * output.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Disable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation in interrupt mode on the
+ * complementary channel.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel TIM Channel to be enabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+ /* Enable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+
+/**
+ * @brief Stops the TIM One Pulse signal generation in interrupt mode on the
+ * complementary channel.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param OutputChannel TIM Channel to be disabled.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+ /* Disable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
+ (+) Configure External Clock source.
+ (+) Configure Complementary channels, break features and dead time.
+ (+) Configure Master and the Slave synchronization.
+ (+) Configure the commutation event in case of use of the Hall sensor interface.
+ (+) Configure the DMA Burst Mode.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Configure the TIM commutation event sequence.
+ * @note This function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource the Commutation Event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the TIM commutation event sequence with interrupt.
+ * @note This function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource the Commutation Event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ /* Enable the Commutation Interrupt Request */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM);
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the TIM commutation event sequence with DMA.
+ * @note This function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @note: The user should configure the DMA in his own software, in This function only the COMDE bit is set
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource the Commutation Event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ /* Enable the Commutation DMA Request */
+ /* Set the DMA Commutation Callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = HAL_TIMEx_DMACommutationCplt;
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = HAL_TIM_DMAError;
+
+ /* Enable the Commutation DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM);
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in master mode.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that
+ * contains the selected trigger output (TRGO) and the Master/Slave
+ * mode.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig)
+{
+ uint32_t tmpcr2;
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_SYNCHRO_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger));
+ assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = htim->Instance->CR2;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* If the timer supports ADC synchronization through TRGO2, set the master mode selection 2 */
+ if (IS_TIM_TRGO2_INSTANCE(htim->Instance))
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_TRGO2_SOURCE(sMasterConfig->MasterOutputTrigger2));
+
+ /* Clear the MMS2 bits */
+ tmpcr2 &= ~TIM_CR2_MMS2;
+ /* Select the TRGO2 source*/
+ tmpcr2 |= sMasterConfig->MasterOutputTrigger2;
+ }
+
+ /* Reset the MMS Bits */
+ tmpcr2 &= ~TIM_CR2_MMS;
+ /* Select the TRGO source */
+ tmpcr2 |= sMasterConfig->MasterOutputTrigger;
+
+ /* Reset the MSM Bit */
+ tmpsmcr &= ~TIM_SMCR_MSM;
+ /* Set master mode */
+ tmpsmcr |= sMasterConfig->MasterSlaveMode;
+
+ /* Update TIMx CR2 */
+ htim->Instance->CR2 = tmpcr2;
+
+ /* Update TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State
+ * and the AOE(automatic output enable).
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfig_TypeDef structure that
+ * contains the BDTR Register configuration information for the TIM peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
+ TIM_BreakDeadTimeConfigTypeDef * sBreakDeadTimeConfig)
+{
+ uint32_t tmpbdtr = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode));
+ assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode));
+ assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel));
+ assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime));
+ assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState));
+ assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity));
+ assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->BreakFilter));
+ assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput));
+ assert_param(IS_TIM_BREAK2_STATE(sBreakDeadTimeConfig->Break2State));
+ assert_param(IS_TIM_BREAK2_POLARITY(sBreakDeadTimeConfig->Break2Polarity));
+ assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->Break2Filter));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State,
+ the OSSI State, the dead time value and the Automatic Output Enable Bit */
+ /* Set the BDTR bits */
+ MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_MOE, sBreakDeadTimeConfig->AutomaticOutput);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BKF, (sBreakDeadTimeConfig->BreakFilter << BDTR_BKF_SHIFT));
+
+ if (IS_TIM_BKIN2_INSTANCE(htim->Instance))
+ {
+ assert_param(IS_TIM_BREAK2_STATE(sBreakDeadTimeConfig->Break2State));
+ assert_param(IS_TIM_BREAK2_POLARITY(sBreakDeadTimeConfig->Break2Polarity));
+ assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->Break2Filter));
+
+ /* Set the BREAK2 input related BDTR bits */
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BK2F, (sBreakDeadTimeConfig->Break2Filter << BDTR_BK2F_SHIFT));
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BK2E, sBreakDeadTimeConfig->Break2State);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BK2P, sBreakDeadTimeConfig->Break2Polarity);
+ }
+
+
+
+ /* Set TIMx_BDTR */
+ htim->Instance->BDTR = tmpbdtr;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
+/**
+ * @brief Configures the break input source.
+ * @param htim TIM handle.
+ * @param BreakInput Break input to configure
+ * This parameter can be one of the following values:
+ * @arg TIM_BREAKINPUT_BRK: Timer break input
+ * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input
+ * @param sBreakInputConfig Break input source configuration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim,
+ uint32_t BreakInput,
+ TIMEx_BreakInputConfigTypeDef *sBreakInputConfig)
+
+{
+ uint32_t tmporx = 0;
+ uint32_t bkin_enable_mask = 0;
+ uint32_t bkin_polarity_mask = 0;
+ uint32_t bkin_enable_bitpos = 0;
+ uint32_t bkin_polarity_bitpos = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_BREAKINPUT(BreakInput));
+ assert_param(IS_TIM_BREAKINPUTSOURCE(sBreakInputConfig->Source));
+ assert_param(IS_TIM_BREAKINPUTSOURCE_STATE(sBreakInputConfig->Enable));
+ if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1)
+ {
+ assert_param(IS_TIM_BREAKINPUTSOURCE_POLARITY(sBreakInputConfig->Polarity));
+ }
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ switch(sBreakInputConfig->Source)
+ {
+ case TIM_BREAKINPUTSOURCE_BKIN:
+ {
+ bkin_enable_mask = TIM1_AF1_BKINE;
+ bkin_enable_bitpos = 0;
+ bkin_polarity_mask = TIM1_AF1_BKINP;
+ bkin_polarity_bitpos = 9;
+ }
+ break;
+
+ case TIM_BREAKINPUTSOURCE_DFSDM1:
+ {
+ bkin_enable_mask = TIM1_AF1_BKDF1BKE;
+ bkin_enable_bitpos = 8;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ switch(BreakInput)
+ {
+ case TIM_BREAKINPUT_BRK:
+ {
+ /* Get the TIMx_AF1 register value */
+ tmporx = htim->Instance->AF1;
+
+ /* Enable the break input */
+ tmporx &= ~bkin_enable_mask;
+ tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask;
+
+ if(sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1)
+ {
+ tmporx &= ~bkin_polarity_mask;
+ tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask;
+ }
+ /* Set TIMx_AF1 */
+ htim->Instance->AF1 = tmporx;
+ }
+ break;
+ case TIM_BREAKINPUT_BRK2:
+ {
+ /* Get the TIMx_AF2 register value */
+ tmporx = htim->Instance->AF2;
+
+ /* Enable the break input */
+ tmporx &= ~bkin_enable_mask;
+ tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask;
+
+ if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1)
+ {
+ tmporx &= ~bkin_polarity_mask;
+ tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask;
+ }
+
+ /* Set TIMx_AF2 */
+ htim->Instance->AF2 = tmporx;
+ }
+ break;
+ default:
+ break;
+ }
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
+
+/**
+ * @brief Configures the TIM2, TIM5 and TIM11 Remapping input capabilities.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @param Remap specifies the TIM input remapping source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TIM2_TIM8_TRGO: TIM2 ITR1 input is connected to TIM8 Trigger output(default)
+ * @arg TIM_TIM2_ETH_PTP: TIM2 ITR1 input is connected to ETH PTP trigger output.
+ * @arg TIM_TIM2_USBFS_SOF: TIM2 ITR1 input is connected to USB FS SOF.
+ * @arg TIM_TIM2_USBHS_SOF: TIM2 ITR1 input is connected to USB HS SOF.
+ * @arg TIM_TIM5_GPIO: TIM5 CH4 input is connected to dedicated Timer pin(default)
+ * @arg TIM_TIM5_LSI: TIM5 CH4 input is connected to LSI clock.
+ * @arg TIM_TIM5_LSE: TIM5 CH4 input is connected to LSE clock.
+ * @arg TIM_TIM5_RTC: TIM5 CH4 input is connected to RTC Output event.
+ * @arg TIM_TIM11_GPIO: TIM11 CH4 input is connected to dedicated Timer pin(default)
+ * @arg TIM_TIM11_SPDIF: SPDIF Frame synchronous
+ * @arg TIM_TIM11_HSE: TIM11 CH4 input is connected to HSE_RTC clock
+ * (HSE divided by a programmable prescaler)
+ * @arg TIM_TIM11_MCO1: TIM11 CH1 input is connected to MCO1
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap)
+{
+ __HAL_LOCK(htim);
+
+ /* Check parameters */
+ assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_REMAP(Remap));
+
+ /* Set the Timer remapping configuration */
+ htim->Instance->OR = Remap;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Group channel 5 and channel 1, 2 or 3
+ * @param htim TIM handle.
+ * @param OCRef specifies the reference signal(s) the OC5REF is combined with.
+ * This parameter can be any combination of the following values:
+ * TIM_GROUPCH5_NONE: No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC
+ * TIM_GROUPCH5_OC1REFC: OC1REFC is the logical AND of OC1REFC and OC5REF
+ * TIM_GROUPCH5_OC2REFC: OC2REFC is the logical AND of OC2REFC and OC5REF
+ * TIM_GROUPCH5_OC3REFC: OC3REFC is the logical AND of OC3REFC and OC5REF
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t OCRef)
+{
+ /* Check parameters */
+ assert_param(IS_TIM_COMBINED3PHASEPWM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_GROUPCH5(OCRef));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Clear GC5Cx bit fields */
+ htim->Instance->CCR5 &= ~(TIM_CCR5_GC5C3|TIM_CCR5_GC5C2|TIM_CCR5_GC5C1);
+
+ /* Set GC5Cx bit fields */
+ htim->Instance->CCR5 |= OCRef;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
+ * @brief Extended Callbacks functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Extension Callbacks functions #####
+ ==============================================================================
+ [..]
+ This section provides Extension TIM callback functions:
+ (+) Timer Commutation callback
+ (+) Timer Break callback
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Hall commutation changed callback in non blocking mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_CommutationCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Hall Break detection callback in non blocking mode
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_BreakCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
+ * @brief Extended Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Extension Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the TIM Hall Sensor interface state
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief TIM DMA Commutation callback.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->CommutationCallback(htim);
+#else
+ HAL_TIMEx_CommutationCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+/**
+ * @}
+ */
+
+/**
+ * @brief Configures the OCRef clear feature
+ * @param htim TIM handle
+ * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that
+ * contains the OCREF clear feature and parameters for the TIM peripheral.
+ * @param Channel specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @arg TIM_Channel_4: TIM Channel 4
+ * @arg TIM_Channel_5: TIM Channel 5
+ * @arg TIM_Channel_6: TIM Channel 6
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim,
+ TIM_ClearInputConfigTypeDef *sClearInputConfig,
+ uint32_t Channel)
+{
+ uint32_t tmpsmcr = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ switch (sClearInputConfig->ClearInputSource)
+ {
+ case TIM_CLEARINPUTSOURCE_NONE:
+ {
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Clear the ETR Bits */
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+
+ /* Set TIMx_SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+ }
+ break;
+
+ case TIM_CLEARINPUTSOURCE_ETR:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
+ assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
+ assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
+
+ TIM_ETR_SetConfig(htim->Instance,
+ sClearInputConfig->ClearInputPrescaler,
+ sClearInputConfig->ClearInputPolarity,
+ sClearInputConfig->ClearInputFilter);
+ }
+ break;
+ default:
+ break;
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 2 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 2 */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_3:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 3 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 3 */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_4:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 4 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 4 */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_5:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR3 |= TIM_CCMR3_OC5CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_6:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR3 |= TIM_CCMR3_OC6CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 1 */
+ htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6CE;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Output Compare Channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim TIM Output Compare handle
+ * @param sConfig TIM Output Compare configuration structure
+ * @param Channel TIM Channels to configure
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 1 in Output Compare */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 2 in Output Compare */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 3 in Output Compare */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 4 in Output Compare */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_5:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC5_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 5 in Output Compare */
+ TIM_OC5_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_6:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC6_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 6 in Output Compare */
+ TIM_OC6_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM PWM channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim TIM PWM handle
+ * @param sConfig TIM PWM configuration structure
+ * @param Channel TIM Channels to be configured
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim,
+ TIM_OC_InitTypeDef* sConfig,
+ uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+ assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 1 in PWM mode */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel1 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 2 in PWM mode */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel2 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode << 8;
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 3 in PWM mode */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel3 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 4 in PWM mode */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel4 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode << 8;
+ }
+ break;
+
+ case TIM_CHANNEL_5:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC5_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 5 in PWM mode */
+ TIM_OC5_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel5*/
+ htim->Instance->CCMR3 |= TIM_CCMR3_OC5PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE;
+ htim->Instance->CCMR3 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_6:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC6_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 5 in PWM mode */
+ TIM_OC6_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel6 */
+ htim->Instance->CCMR3 |= TIM_CCMR3_OC6PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE;
+ htim->Instance->CCMR3 |= sConfig->OCFastMode << 8;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel xN.
+ * @param TIMx to select the TIM peripheral
+ * @param Channel specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @param ChannelNState specifies the TIM Channel CCxNE bit new state.
+ * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable.
+ * @retval None
+ */
+static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState)
+{
+ uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_ADVANCED_INSTANCE(TIMx));
+ assert_param(IS_TIM_COMPLEMENTARY_CHANNELS(Channel));
+
+ tmp = TIM_CCER_CC1NE << Channel;
+
+ /* Reset the CCxNE Bit */
+ TIMx->CCER &= ~tmp;
+
+ /* Set or reset the CCxNE Bit */
+ TIMx->CCER |= (uint32_t)(ChannelNState << Channel);
+}
+
+/**
+ * @brief Timer Output Compare 5 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The output configuration structure
+ * @retval None
+ */
+static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0;
+ uint32_t tmpccer = 0;
+ uint32_t tmpcr2 = 0;
+
+ /* Disable the output: Reset the CCxE Bit */
+ TIMx->CCER &= ~TIM_CCER_CC5E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR3;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= ~(TIM_CCMR3_OC5M);
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC5P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 16);
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS5;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 8);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR3 */
+ TIMx->CCMR3 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR5 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Timer Output Compare 6 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The output configuration structure
+ * @retval None
+ */
+static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0;
+ uint32_t tmpccer = 0;
+ uint32_t tmpcr2 = 0;
+
+ /* Disable the output: Reset the CCxE Bit */
+ TIMx->CCER &= ~TIM_CCER_CC6E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR3;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= ~(TIM_CCMR3_OC6M);
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint32_t)~TIM_CCER_CC6P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 20);
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS6;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 10);
+ }
+
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR3 */
+ TIMx->CCMR3 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR6 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c
new file mode 100644
index 00000000..86a437c1
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c
@@ -0,0 +1,2172 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_uart.c
+ * @author MCD Application Team
+ * @brief UART HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Universal Asynchronous Receiver Transmitter (UART) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The UART HAL driver can be used as follows:
+
+ (#) Declare a UART_HandleTypeDef handle structure.
+
+ (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API:
+ (##) Enable the USARTx interface clock.
+ (##) UART pins configuration:
+ (+++) Enable the clock for the UART GPIOs.
+ (+++) Configure these UART pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT()
+ and HAL_UART_Receive_IT() APIs):
+ (+++) Configure the USARTx interrupt priority.
+ (+++) Enable the NVIC USART IRQ handle.
+ (##) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA()
+ and HAL_UART_Receive_DMA() APIs):
+ (+++) Declare a DMA handle structure for the Tx/Rx stream.
+ (+++) Enable the DMAx interface clock.
+ (+++) Configure the declared DMA handle structure with the required
+ Tx/Rx parameters.
+ (+++) Configure the DMA Tx/Rx Stream.
+ (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle.
+ (+++) Configure the priority and enable the NVIC for the transfer complete
+ interrupt on the DMA Tx/Rx Stream.
+
+ (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware
+ flow control and Mode(Receiver/Transmitter) in the Init structure.
+
+ (#) For the UART asynchronous mode, initialize the UART registers by calling
+ the HAL_UART_Init() API.
+
+ (#) For the UART Half duplex mode, initialize the UART registers by calling
+ the HAL_HalfDuplex_Init() API.
+
+ (#) For the LIN mode, initialize the UART registers by calling the HAL_LIN_Init() API.
+
+ (#) For the Multi-Processor mode, initialize the UART registers by calling
+ the HAL_MultiProcessor_Init() API.
+
+ [..]
+ (@) The specific UART interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() inside the transmit
+ and receive process.
+
+ [..]
+ (@) These APIs (HAL_UART_Init() and HAL_HalfDuplex_Init()) configure also the
+ low level Hardware GPIO, CLOCK, CORTEX...etc) by calling the customized
+ HAL_UART_MspInit() API.
+
+ [..]
+ Three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Send an amount of data in blocking mode using HAL_UART_Transmit()
+ (+) Receive an amount of data in blocking mode using HAL_UART_Receive()
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Send an amount of data in non blocking mode using HAL_UART_Transmit_IT()
+ (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode using HAL_UART_Receive_IT()
+ (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_RxCpltCallback
+ (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_UART_ErrorCallback
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Send an amount of data in non blocking mode (DMA) using HAL_UART_Transmit_DMA()
+ (+) At transmission end of half transfer HAL_UART_TxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_TxHalfCpltCallback
+ (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_TxCpltCallback
+ (+) Receive an amount of data in non blocking mode (DMA) using HAL_UART_Receive_DMA()
+ (+) At reception end of half transfer HAL_UART_RxHalfCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_RxHalfCpltCallback
+ (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can
+ add his own code by customization of function pointer HAL_UART_RxCpltCallback
+ (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_UART_ErrorCallback
+ (+) Pause the DMA Transfer using HAL_UART_DMAPause()
+ (+) Resume the DMA Transfer using HAL_UART_DMAResume()
+ (+) Stop the DMA Transfer using HAL_UART_DMAStop()
+
+ *** UART HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in UART HAL driver.
+
+ (+) __HAL_UART_ENABLE: Enable the UART peripheral
+ (+) __HAL_UART_DISABLE: Disable the UART peripheral
+ (+) __HAL_UART_GET_FLAG : Check whether the specified UART flag is set or not
+ (+) __HAL_UART_CLEAR_IT : Clears the specified UART ISR flag
+ (+) __HAL_UART_ENABLE_IT: Enable the specified UART interrupt
+ (+) __HAL_UART_DISABLE_IT: Disable the specified UART interrupt
+ (+) __HAL_UART_GET_IT_SOURCE: Check whether the specified UART interrupt has occurred or not
+
+ [..]
+ (@) You can refer to the UART HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup UART UART
+ * @brief HAL UART module driver
+ * @{
+ */
+
+#ifdef HAL_UART_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup UART_Private_Constants UART Private Constants
+ * @{
+ */
+#define UART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \
+ USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8))
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup UART_Private_Functions
+ * @{
+ */
+static void UART_EndTxTransfer(UART_HandleTypeDef *huart);
+static void UART_EndRxTransfer(UART_HandleTypeDef *huart);
+static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMAError(DMA_HandleTypeDef *hdma);
+static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart);
+static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart);
+static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup UART_Exported_Functions UART Exported Functions
+ * @{
+ */
+
+/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the USARTx or the UARTy
+ in asynchronous mode.
+ (+) For the asynchronous mode only these parameters can be configured:
+ (++) Baud Rate
+ (++) Word Length
+ (++) Stop Bit
+ (++) Parity: If the parity is enabled, then the MSB bit of the data written
+ in the data register is transmitted but is changed by the parity bit.
+ Depending on the frame length defined by the M bit (8-bits or 9-bits),
+ please refer to Reference manual for possible UART frame formats.
+ (++) Hardware flow control
+ (++) Receiver/transmitter modes
+ (++) Over Sampling Method
+ [..]
+ The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init() and HAL_MultiProcessor_Init() APIs
+ follow respectively the UART asynchronous, UART Half duplex, LIN and Multi-Processor
+ configuration procedures (details for the procedures are available in reference manual (RM0329)).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the UART mode according to the specified
+ * parameters in the UART_InitTypeDef and creates the associated handle .
+ * @param huart uart handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ if(huart->Init.HwFlowCtl != UART_HWCONTROL_NONE)
+ {
+ /* Check the parameters */
+ assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance));
+ }
+ else
+ {
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+ }
+
+ if(huart->gState == HAL_UART_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ huart->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK */
+ HAL_UART_MspInit(huart);
+ }
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ if (UART_SetConfig(huart) == HAL_ERROR)
+ {
+ return HAL_ERROR;
+ }
+
+ if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+ {
+ UART_AdvFeatureConfig(huart);
+ }
+
+ /* In asynchronous mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/
+ CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
+ CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN));
+
+ /* Enable the Peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */
+ return (UART_CheckIdleState(huart));
+}
+
+/**
+ * @brief Initializes the half-duplex mode according to the specified
+ * parameters in the UART_InitTypeDef and creates the associated handle .
+ * @param huart UART handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ if(huart->gState == HAL_UART_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ huart->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK */
+ HAL_UART_MspInit(huart);
+ }
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ if (UART_SetConfig(huart) == HAL_ERROR)
+ {
+ return HAL_ERROR;
+ }
+
+ if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+ {
+ UART_AdvFeatureConfig(huart);
+ }
+
+ /* In half-duplex mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - SCEN and IREN bits in the USART_CR3 register.*/
+ CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
+ CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN));
+
+ /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */
+ SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL);
+
+ /* Enable the Peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */
+ return (UART_CheckIdleState(huart));
+}
+
+
+/**
+ * @brief Initialize the LIN mode according to the specified
+ * parameters in the UART_InitTypeDef and creates the associated handle .
+ * @param huart UART handle.
+ * @param BreakDetectLength specifies the LIN break detection length.
+ * This parameter can be one of the following values:
+ * @arg @ref UART_LINBREAKDETECTLENGTH_10B 10-bit break detection
+ * @arg @ref UART_LINBREAKDETECTLENGTH_11B 11-bit break detection
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+ assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength));
+ assert_param(IS_LIN_WORD_LENGTH(huart->Init.WordLength));
+
+ if(huart->gState == HAL_UART_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ huart->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK */
+ HAL_UART_MspInit(huart);
+ }
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ if (UART_SetConfig(huart) == HAL_ERROR)
+ {
+ return HAL_ERROR;
+ }
+
+ if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+ {
+ UART_AdvFeatureConfig(huart);
+ }
+
+ /* In LIN mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - SCEN and IREN bits in the USART_CR3 register.*/
+ CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN);
+ CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN));
+
+ /* Enable the LIN mode by setting the LINEN bit in the CR2 register */
+ SET_BIT(huart->Instance->CR2, USART_CR2_LINEN);
+
+ /* Set the USART LIN Break detection length. */
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength);
+
+ /* Enable the Peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */
+ return (UART_CheckIdleState(huart));
+}
+
+
+/**
+ * @brief Initialize the multiprocessor mode according to the specified
+ * parameters in the UART_InitTypeDef and initialize the associated handle.
+ * @param huart UART handle.
+ * @param Address UART node address (4-, 6-, 7- or 8-bit long).
+ * @param WakeUpMethod specifies the UART wakeup method.
+ * This parameter can be one of the following values:
+ * @arg @ref UART_WAKEUPMETHOD_IDLELINE WakeUp by an idle line detection
+ * @arg @ref UART_WAKEUPMETHOD_ADDRESSMARK WakeUp by an address mark
+ * @note If the user resorts to idle line detection wake up, the Address parameter
+ * is useless and ignored by the initialization function.
+ * @note If the user resorts to address mark wake up, the address length detection
+ * is configured by default to 4 bits only. For the UART to be able to
+ * manage 6-, 7- or 8-bit long addresses detection
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the wake up method parameter */
+ assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod));
+
+ if(huart->gState == HAL_UART_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ huart->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK */
+ HAL_UART_MspInit(huart);
+ }
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ if (UART_SetConfig(huart) == HAL_ERROR)
+ {
+ return HAL_ERROR;
+ }
+
+ if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+ {
+ UART_AdvFeatureConfig(huart);
+ }
+
+ /* In multiprocessor mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - SCEN, HDSEL and IREN bits in the USART_CR3 register. */
+ CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
+ CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN));
+
+ if (WakeUpMethod == UART_WAKEUPMETHOD_ADDRESSMARK)
+ {
+ /* If address mark wake up method is chosen, set the USART address node */
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)Address << UART_CR2_ADDRESS_LSB_POS));
+ }
+
+ /* Set the wake up method by setting the WAKE bit in the CR1 register */
+ MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod);
+
+ /* Enable the Peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */
+ return (UART_CheckIdleState(huart));
+}
+
+
+/**
+ * @brief Initialize the RS485 Driver enable feature according to the specified
+ * parameters in the UART_InitTypeDef and creates the associated handle.
+ * @param huart UART handle.
+ * @param Polarity select the driver enable polarity.
+ * This parameter can be one of the following values:
+ * @arg @ref UART_DE_POLARITY_HIGH DE signal is active high
+ * @arg @ref UART_DE_POLARITY_LOW DE signal is active low
+ * @param AssertionTime Driver Enable assertion time:
+ * 5-bit value defining the time between the activation of the DE (Driver Enable)
+ * signal and the beginning of the start bit. It is expressed in sample time
+ * units (1/8 or 1/16 bit time, depending on the oversampling rate)
+ * @param DeassertionTime Driver Enable deassertion time:
+ * 5-bit value defining the time between the end of the last stop bit, in a
+ * transmitted message, and the de-activation of the DE (Driver Enable) signal.
+ * It is expressed in sample time units (1/8 or 1/16 bit time, depending on the
+ * oversampling rate).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, uint32_t DeassertionTime)
+{
+ uint32_t temp = 0x0;
+
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+ /* Check the Driver Enable UART instance */
+ assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance));
+
+ /* Check the Driver Enable polarity */
+ assert_param(IS_UART_DE_POLARITY(Polarity));
+
+ /* Check the Driver Enable assertion time */
+ assert_param(IS_UART_ASSERTIONTIME(AssertionTime));
+
+ /* Check the Driver Enable deassertion time */
+ assert_param(IS_UART_DEASSERTIONTIME(DeassertionTime));
+
+ if(huart->gState == HAL_UART_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ huart->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX */
+ HAL_UART_MspInit(huart);
+ }
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ if (UART_SetConfig(huart) == HAL_ERROR)
+ {
+ return HAL_ERROR;
+ }
+
+ if(huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+ {
+ UART_AdvFeatureConfig(huart);
+ }
+
+ /* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */
+ SET_BIT(huart->Instance->CR3, USART_CR3_DEM);
+
+ /* Set the Driver Enable polarity */
+ MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, Polarity);
+
+ /* Set the Driver Enable assertion and deassertion times */
+ temp = (AssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS);
+ temp |= (DeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS);
+ MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT|USART_CR1_DEAT), temp);
+
+ /* Enable the Peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */
+ return (UART_CheckIdleState(huart));
+}
+
+/**
+ * @brief DeInitializes the UART peripheral
+ * @param huart uart handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ huart->Instance->CR1 = 0x0U;
+ huart->Instance->CR2 = 0x0U;
+ huart->Instance->CR3 = 0x0U;
+
+ /* DeInit the low level hardware */
+ HAL_UART_MspDeInit(huart);
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState = HAL_UART_STATE_RESET;
+ huart->RxState = HAL_UART_STATE_RESET;
+
+ /* Process Unlock */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief UART MSP Init
+ * @param huart uart handle
+ * @retval None
+ */
+__weak void HAL_UART_MspInit(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_UART_MspInit can be implemented in the user file
+ */
+}
+
+/**
+ * @brief UART MSP DeInit
+ * @param huart uart handle
+ * @retval None
+ */
+__weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_UART_MspDeInit can be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup UART_Exported_Functions_Group2 IO operation functions
+ * @brief UART Transmit/Receive functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ This subsection provides a set of functions allowing to manage the UART asynchronous
+ and Half duplex data transfers.
+
+ (#) There are two mode of transfer:
+ (+) Blocking mode: The communication is performed in polling mode.
+ The HAL status of all data processing is returned by the same function
+ after finishing transfer.
+ (+) Non-Blocking mode: The communication is performed using Interrupts
+ or DMA, These API's return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated UART IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+ The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks
+ will be executed respectively at the end of the transmit or Receive process
+ The HAL_UART_ErrorCallback()user callback will be executed when a communication error is detected
+
+ (#) Blocking mode API's are :
+ (+) HAL_UART_Transmit()
+ (+) HAL_UART_Receive()
+
+ (#) Non-Blocking mode API's with Interrupt are :
+ (+) HAL_UART_Transmit_IT()
+ (+) HAL_UART_Receive_IT()
+ (+) HAL_UART_IRQHandler()
+ (+) UART_Transmit_IT()
+ (+) UART_Receive_IT()
+
+ (#) Non-Blocking mode API's with DMA are :
+ (+) HAL_UART_Transmit_DMA()
+ (+) HAL_UART_Receive_DMA()
+ (+) HAL_UART_DMAPause()
+ (+) HAL_UART_DMAResume()
+ (+) HAL_UART_DMAStop()
+
+ (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode:
+ (+) HAL_UART_TxHalfCpltCallback()
+ (+) HAL_UART_TxCpltCallback()
+ (+) HAL_UART_RxHalfCpltCallback()
+ (+) HAL_UART_RxCpltCallback()
+ (+) HAL_UART_ErrorCallback()
+
+
+ -@- In the Half duplex communication, it is forbidden to run the transmit
+ and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Send an amount of data in blocking mode.
+ * @param huart UART handle.
+ * @param pData Pointer to data buffer.
+ * @param Size Amount of data to be sent.
+ * @param Timeout Timeout duration.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint32_t tickstart = 0U;
+
+ /* Check that a Tx process is not already ongoing */
+ if(huart->gState == HAL_UART_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState = HAL_UART_STATE_BUSY_TX;
+
+ /* Init tickstart for timeout managment*/
+ tickstart = HAL_GetTick();
+
+ huart->TxXferSize = Size;
+ huart->TxXferCount = Size;
+ while(huart->TxXferCount > 0U)
+ {
+ huart->TxXferCount--;
+ if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
+ {
+ tmp = (uint16_t*) pData;
+ huart->Instance->TDR = (*tmp & (uint16_t)0x01FFU);
+ pData += 2;
+ }
+ else
+ {
+ huart->Instance->TDR = (*pData++ & (uint8_t)0xFFU);
+ }
+ }
+ if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* At end of Tx process, restore huart->gState to Ready */
+ huart->gState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode.
+ * @param huart UART handle.
+ * @param pData pointer to data buffer.
+ * @param Size amount of data to be received.
+ * @param Timeout Timeout duration.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint16_t* tmp;
+ uint16_t uhMask;
+ uint32_t tickstart = 0U;
+
+ /* Check that a Rx process is not already ongoing */
+ if(huart->RxState == HAL_UART_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->RxState = HAL_UART_STATE_BUSY_RX;
+
+ /* Init tickstart for timeout managment*/
+ tickstart = HAL_GetTick();
+
+ huart->RxXferSize = Size;
+ huart->RxXferCount = Size;
+
+ /* Computation of UART mask to apply to RDR register */
+ UART_MASK_COMPUTATION(huart);
+ uhMask = huart->Mask;
+
+ /* as long as data have to be received */
+ while(huart->RxXferCount > 0U)
+ {
+ huart->RxXferCount--;
+ if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+ if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
+ {
+ tmp = (uint16_t*) pData ;
+ *tmp = (uint16_t)(huart->Instance->RDR & uhMask);
+ pData +=2U;
+ }
+ else
+ {
+ *pData++ = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask);
+ }
+ }
+
+ /* At end of Rx process, restore huart->RxState to Ready */
+ huart->RxState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Send an amount of data in interrupt mode.
+ * @param huart UART handle.
+ * @param pData pointer to data buffer.
+ * @param Size amount of data to be sent.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ /* Check that a Tx process is not already ongoing */
+ if(huart->gState == HAL_UART_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->pTxBuffPtr = pData;
+ huart->TxXferSize = Size;
+ huart->TxXferCount = Size;
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState = HAL_UART_STATE_BUSY_TX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ /* Enable the UART Transmit Data Register Empty Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in interrupt mode.
+ * @param huart UART handle.
+ * @param pData pointer to data buffer.
+ * @param Size amount of data to be received.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ /* Check that a Rx process is not already ongoing */
+ if(huart->RxState == HAL_UART_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->pRxBuffPtr = pData;
+ huart->RxXferSize = Size;
+ huart->RxXferCount = Size;
+
+ /* Computation of UART mask to apply to RDR register */
+ UART_MASK_COMPUTATION(huart);
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->RxState = HAL_UART_STATE_BUSY_RX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the UART Parity Error and Data Register not empty Interrupts */
+ SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Send an amount of data in DMA mode.
+ * @param huart UART handle.
+ * @param pData pointer to data buffer.
+ * @param Size amount of data to be sent.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ /* Check that a Tx process is not already ongoing */
+ if(huart->gState == HAL_UART_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->pTxBuffPtr = pData;
+ huart->TxXferSize = Size;
+ huart->TxXferCount = Size;
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->gState = HAL_UART_STATE_BUSY_TX;
+
+ /* Set the UART DMA transfer complete callback */
+ huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt;
+
+ /* Set the UART DMA Half transfer complete callback */
+ huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt;
+
+ /* Set the DMA error callback */
+ huart->hdmatx->XferErrorCallback = UART_DMAError;
+
+ /* Set the DMA abort callback */
+ huart->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the UART transmit DMA channel */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(huart->hdmatx, *(uint32_t*)tmp, (uint32_t)&huart->Instance->TDR, Size);
+
+ /* Clear the TC flag in the SR register by writing 0 to it */
+ __HAL_UART_CLEAR_IT(huart, UART_FLAG_TC);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ /* Enable the DMA transfer for transmit request by setting the DMAT bit
+ in the UART CR3 register */
+ SET_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in DMA mode.
+ * @param huart UART handle.
+ * @param pData pointer to data buffer.
+ * @param Size amount of data to be received.
+ * @note When the UART parity is enabled (PCE = 1), the received data contain
+ * the parity bit (MSB position).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ /* Check that a Rx process is not already ongoing */
+ if(huart->RxState == HAL_UART_STATE_READY)
+ {
+ if((pData == NULL ) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->pRxBuffPtr = pData;
+ huart->RxXferSize = Size;
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->RxState = HAL_UART_STATE_BUSY_RX;
+
+ /* Set the UART DMA transfer complete callback */
+ huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt;
+
+ /* Set the UART DMA Half transfer complete callback */
+ huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt;
+
+ /* Set the DMA error callback */
+ huart->hdmarx->XferErrorCallback = UART_DMAError;
+
+ /* Set the DMA abort callback */
+ huart->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ tmp = (uint32_t*)&pData;
+ HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, *(uint32_t*)tmp, Size);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ /* Enable the UART Parity Error Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+ in the UART CR3 register */
+ SET_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Pause the DMA Transfer.
+ * @param huart UART handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart)
+{
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ if ((huart->gState == HAL_UART_STATE_BUSY_TX) &&
+ (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)))
+ {
+ /* Disable the UART DMA Tx request */
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+ }
+ if ((huart->RxState == HAL_UART_STATE_BUSY_RX) &&
+ (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)))
+ {
+ /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Disable the UART DMA Rx request */
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resume the DMA Transfer.
+ * @param huart UART handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart)
+{
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ if(huart->gState == HAL_UART_STATE_BUSY_TX)
+ {
+ /* Enable the UART DMA Tx request */
+ SET_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+ }
+ if(huart->RxState == HAL_UART_STATE_BUSY_RX)
+ {
+ /* Clear the Overrun flag before resuming the Rx transfer*/
+ __HAL_UART_CLEAR_IT(huart, UART_CLEAR_OREF);
+
+ /* Reenable PE and ERR (Frame error, noise error, overrun error) interrupts */
+ SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the UART DMA Rx request */
+ SET_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+ }
+
+ /* If the UART peripheral is still not enabled, enable it */
+ if ((huart->Instance->CR1 & USART_CR1_UE) == 0U)
+ {
+ /* Enable UART peripheral */
+ __HAL_UART_ENABLE(huart);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop the DMA Transfer.
+ * @param huart UART handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart)
+{
+ /* The Lock is not implemented on this API to allow the user application
+ to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() /
+ HAL_UART_TxHalfCpltCallback / HAL_UART_RxHalfCpltCallback:
+ indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete
+ interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of
+ the stream and the corresponding call back is executed. */
+
+ /* Stop UART DMA Tx request if ongoing */
+ if ((huart->gState == HAL_UART_STATE_BUSY_TX) &&
+ (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)))
+ {
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+
+ /* Abort the UART DMA Tx channel */
+ if(huart->hdmatx != NULL)
+ {
+ HAL_DMA_Abort(huart->hdmatx);
+ }
+
+ UART_EndTxTransfer(huart);
+ }
+
+ /* Stop UART DMA Rx request if ongoing */
+ if ((huart->RxState == HAL_UART_STATE_BUSY_RX) &&
+ (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)))
+ {
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+
+ /* Abort the UART DMA Rx channel */
+ if(huart->hdmarx != NULL)
+ {
+ HAL_DMA_Abort(huart->hdmarx);
+ }
+
+ UART_EndRxTransfer(huart);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles UART interrupt request.
+ * @param huart uart handle
+ * @retval None
+ */
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart)
+{
+ uint32_t isrflags = READ_REG(huart->Instance->ISR);
+ uint32_t cr1its = READ_REG(huart->Instance->CR1);
+ uint32_t cr3its = READ_REG(huart->Instance->CR3);
+ uint32_t errorflags;
+
+ /* If no error occurs */
+ errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE));
+ if (errorflags == RESET)
+ {
+ /* UART in mode Receiver ---------------------------------------------------*/
+ if(((isrflags & USART_ISR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+ {
+ UART_Receive_IT(huart);
+ return;
+ }
+ }
+
+ /* If some errors occur */
+ if( (errorflags != RESET)
+ && ( ((cr3its & USART_CR3_EIE) != RESET)
+ || ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE)) != RESET)) )
+ {
+
+ /* UART parity error interrupt occurred -------------------------------------*/
+ if(((isrflags & USART_ISR_PE) != RESET) && ((cr1its & USART_CR1_PEIE) != RESET))
+ {
+ __HAL_UART_CLEAR_IT(huart, UART_CLEAR_PEF);
+
+ huart->ErrorCode |= HAL_UART_ERROR_PE;
+ }
+
+ /* UART frame error interrupt occurred --------------------------------------*/
+ if(((isrflags & USART_ISR_FE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ __HAL_UART_CLEAR_IT(huart, UART_CLEAR_FEF);
+
+ huart->ErrorCode |= HAL_UART_ERROR_FE;
+ }
+
+ /* UART noise error interrupt occurred --------------------------------------*/
+ if(((isrflags & USART_ISR_NE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+ {
+ __HAL_UART_CLEAR_IT(huart, UART_CLEAR_NEF);
+
+ huart->ErrorCode |= HAL_UART_ERROR_NE;
+ }
+
+ /* UART Over-Run interrupt occurred -----------------------------------------*/
+ if(((isrflags & USART_ISR_ORE) != RESET) &&
+ (((cr1its & USART_CR1_RXNEIE) != RESET) || ((cr3its & USART_CR3_EIE) != RESET)))
+ {
+ __HAL_UART_CLEAR_IT(huart, UART_CLEAR_OREF);
+
+ huart->ErrorCode |= HAL_UART_ERROR_ORE;
+ }
+
+ /* Call UART Error Call back function if need be --------------------------*/
+ if(huart->ErrorCode != HAL_UART_ERROR_NONE)
+ {
+ /* UART in mode Receiver ---------------------------------------------------*/
+ if(((isrflags & USART_ISR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+ {
+ UART_Receive_IT(huart);
+ }
+
+ /* If Overrun error occurs, or if any error occurs in DMA mode reception,
+ consider error as blocking */
+ if (((huart->ErrorCode & HAL_UART_ERROR_ORE) != RESET) ||
+ (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)))
+ {
+ /* Blocking error : transfer is aborted
+ Set the UART state ready to be able to start again the process,
+ Disable Rx Interrupts, and disable Rx DMA request, if ongoing */
+ UART_EndRxTransfer(huart);
+
+ /* Disable the UART DMA Rx request if enabled */
+ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR))
+ {
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+
+ /* Abort the UART DMA Rx channel */
+ if(huart->hdmarx != NULL)
+ {
+ /* Set the UART DMA Abort callback :
+ will lead to call HAL_UART_ErrorCallback() at end of DMA abort procedure */
+ huart->hdmarx->XferAbortCallback = UART_DMAAbortOnError;
+
+ /* Abort DMA RX */
+ if(HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK)
+ {
+ /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */
+ huart->hdmarx->XferAbortCallback(huart->hdmarx);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_UART_ErrorCallback(huart);
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+ HAL_UART_ErrorCallback(huart);
+ }
+ }
+ else
+ {
+ /* Non Blocking error : transfer could go on.
+ Error is notified to user through user error callback */
+ HAL_UART_ErrorCallback(huart);
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ }
+ }
+ return;
+
+ } /* End if some error occurs */
+
+ /* UART in mode Transmitter ------------------------------------------------*/
+ if(((isrflags & USART_ISR_TXE) != RESET) && ((cr1its & USART_CR1_TXEIE) != RESET))
+ {
+ UART_Transmit_IT(huart);
+ return;
+ }
+
+ /* UART in mode Transmitter (transmission end) -----------------------------*/
+ if(((isrflags & USART_ISR_TC) != RESET) && ((cr1its & USART_CR1_TCIE) != RESET))
+ {
+ UART_EndTransmit_IT(huart);
+ return;
+ }
+
+}
+
+/**
+ * @brief This function handles UART Communication Timeout.
+ * @param huart UART handle
+ * @param Flag specifies the UART flag to check.
+ * @param Status The new Flag status (SET or RESET).
+ * @param Tickstart Tick start value
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout)
+{
+ /* Wait until flag is set */
+ while((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status)
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick()-Tickstart) >= Timeout))
+ {
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE));
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ huart->gState = HAL_UART_STATE_READY;
+ huart->RxState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief DMA UART transmit process complete callback
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* DMA Normal mode*/
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ huart->TxXferCount = 0U;
+
+ /* Disable the DMA transfer for transmit request by setting the DMAT bit
+ in the UART CR3 register */
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+
+ /* Enable the UART Transmit Complete Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_TCIE);
+ }
+ /* DMA Circular mode */
+ else
+ {
+ HAL_UART_TxCpltCallback(huart);
+ }
+}
+
+/**
+ * @brief DMA UART transmit process half complete callback
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_UART_TxHalfCpltCallback(huart);
+}
+
+/**
+ * @brief DMA UART receive process complete callback
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* DMA Normal mode */
+ if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0U)
+ {
+ huart->RxXferCount = 0U;
+
+ /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Disable the DMA transfer for the receiver request by setting the DMAR bit
+ in the UART CR3 register */
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+
+ /* At end of Rx process, restore huart->RxState to Ready */
+ huart->RxState = HAL_UART_STATE_READY;
+ }
+ HAL_UART_RxCpltCallback(huart);
+}
+
+/**
+ * @brief DMA UART receive process half complete callback
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ HAL_UART_RxHalfCpltCallback(huart);
+}
+
+/**
+ * @brief DMA UART communication error callback
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void UART_DMAError(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ huart->RxXferCount = 0U;
+ huart->TxXferCount = 0U;
+ /* Stop UART DMA Tx request if ongoing */
+ if ( (huart->gState == HAL_UART_STATE_BUSY_TX)
+ &&(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) )
+ {
+ UART_EndTxTransfer(huart);
+ }
+
+ /* Stop UART DMA Rx request if ongoing */
+ if ( (huart->RxState == HAL_UART_STATE_BUSY_RX)
+ &&(HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) )
+ {
+ UART_EndRxTransfer(huart);
+ }
+ SET_BIT(huart->ErrorCode, HAL_UART_ERROR_DMA);
+ HAL_UART_ErrorCallback(huart);
+}
+
+/**
+ * @brief DMA UART communication abort callback, when call by HAL services on Error
+ * (To be called at end of DMA Abort procedure following error occurrence).
+ * @param hdma DMA handle.
+ * @retval None
+ */
+static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma)
+{
+ UART_HandleTypeDef* huart = (UART_HandleTypeDef*)(hdma->Parent);
+ huart->RxXferCount = 0U;
+ huart->TxXferCount = 0U;
+
+ HAL_UART_ErrorCallback(huart);
+}
+
+/**
+ * @brief Tx Transfer completed callbacks
+ * @param huart uart handle
+ * @retval None
+ */
+ __weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_UART_TxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Half Transfer completed callbacks.
+ * @param huart UART handle
+ * @retval None
+ */
+ __weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_UART_TxHalfCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks
+ * @param huart uart handle
+ * @retval None
+ */
+__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_UART_RxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Half Transfer completed callbacks.
+ * @param huart UART handle
+ * @retval None
+ */
+__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_UART_RxHalfCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief UART error callbacks
+ * @param huart uart handle
+ * @retval None
+ */
+ __weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_UART_ErrorCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Send an amount of data in interrupt mode
+ * Function called under interruption only, once
+ * interruptions have been enabled by HAL_UART_Transmit_IT()
+ * @param huart UART handle
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart)
+{
+ uint16_t* tmp;
+
+ /* Check that a Tx process is ongoing */
+ if (huart->gState == HAL_UART_STATE_BUSY_TX)
+ {
+
+ if(huart->TxXferCount == 0U)
+ {
+ /* Disable the UART Transmit Data Register Empty Interrupt */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE);
+
+ /* Enable the UART Transmit Complete Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_TCIE);
+
+ return HAL_OK;
+ }
+ else
+ {
+ if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
+ {
+ tmp = (uint16_t*) huart->pTxBuffPtr;
+ huart->Instance->TDR = (*tmp & (uint16_t)0x01FFU);
+ huart->pTxBuffPtr += 2U;
+ }
+ else
+ {
+ huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr++ & (uint8_t)0xFFU);
+ }
+
+ huart->TxXferCount--;
+
+ return HAL_OK;
+ }
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Wrap up transmission in non-blocking mode.
+ * @param huart pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart)
+{
+ /* Disable the UART Transmit Complete Interrupt */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE);
+
+ /* Tx process is ended, restore huart->gState to Ready */
+ huart->gState = HAL_UART_STATE_READY;
+
+ HAL_UART_TxCpltCallback(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Receive an amount of data in interrupt mode
+ * Function called under interruption only, once
+ * interruptions have been enabled by HAL_UART_Receive_IT()
+ * @param huart UART handle
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart)
+{
+ uint16_t* tmp;
+ uint16_t uhMask = huart->Mask;
+
+ /* Check that a Rx process is ongoing */
+ if(huart->RxState == HAL_UART_STATE_BUSY_RX)
+ {
+
+ if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
+ {
+ tmp = (uint16_t*) huart->pRxBuffPtr ;
+ *tmp = (uint16_t)(huart->Instance->RDR & uhMask);
+ huart->pRxBuffPtr +=2;
+ }
+ else
+ {
+ *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask);
+ }
+
+ if(--huart->RxXferCount == 0)
+ {
+ /* Disable the UART Parity Error Interrupt and RXNE interrupt*/
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+
+ /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Rx process is completed, restore huart->RxState to Ready */
+ huart->RxState = HAL_UART_STATE_READY;
+
+ HAL_UART_RxCpltCallback(huart);
+
+ return HAL_OK;
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Clear RXNE interrupt flag */
+ __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST);
+
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion).
+ * @param huart UART handle.
+ * @retval None
+ */
+static void UART_EndTxTransfer(UART_HandleTypeDef *huart)
+{
+ /* Disable TXEIE and TCIE interrupts */
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE));
+
+ /* At end of Tx process, restore huart->gState to Ready */
+ huart->gState = HAL_UART_STATE_READY;
+}
+
+
+/**
+ * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion).
+ * @param huart UART handle.
+ * @retval None
+ */
+static void UART_EndRxTransfer(UART_HandleTypeDef *huart)
+{
+ /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* At end of Rx process, restore huart->RxState to Ready */
+ huart->RxState = HAL_UART_STATE_READY;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions
+ * @brief UART control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the UART.
+ (+) HAL_UART_GetState() API is helpful to check in run-time the state of the UART peripheral.
+ (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode
+ (+) HAL_MultiProcessor_DisableMuteMode() API disables mute mode
+ (+) HAL_MultiProcessor_EnterMuteMode() API enters mute mode
+ (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode
+ (+) UART_SetConfig() API configures the UART peripheral
+ (+) UART_AdvFeatureConfig() API optionally configures the UART advanced features
+ (+) UART_CheckIdleState() API ensures that TEACK and/or REACK are set after initialization
+ (+) HAL_HalfDuplex_EnableTransmitter() API disables receiver and enables transmitter
+ (+) HAL_HalfDuplex_EnableReceiver() API disables transmitter and enables receiver
+ (+) HAL_LIN_SendBreak() API transmits the break characters
+ (+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address
+ detection length to more than 4 bits for multiprocessor address mark wake up.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enable UART in mute mode (doesn't mean UART enters mute mode;
+ * to enter mute mode, HAL_MultiProcessor_EnterMuteMode() API must be called)
+ * @param huart UART handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart)
+{
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Enable USART mute mode by setting the MME bit in the CR1 register */
+ SET_BIT(huart->Instance->CR1, USART_CR1_MME);
+
+ huart->gState = HAL_UART_STATE_READY;
+
+ return (UART_CheckIdleState(huart));
+}
+
+/**
+ * @brief Disable UART mute mode (doesn't mean it actually wakes up the software,
+ * as it may not have been in mute mode at this very moment).
+ * @param huart uart handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart)
+{
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable USART mute mode by clearing the MME bit in the CR1 register */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_MME);
+
+ huart->gState = HAL_UART_STATE_READY;
+
+ return (UART_CheckIdleState(huart));
+}
+
+/**
+ * @brief Enter UART mute mode (means UART actually enters mute mode).
+ * To exit from mute mode, HAL_MultiProcessor_DisableMuteMode() API must be called.
+ * @param huart uart handle
+ * @retval HAL status
+ */
+void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart)
+{
+ __HAL_UART_SEND_REQ(huart, UART_MUTE_MODE_REQUEST);
+}
+
+
+
+/**
+ * @brief return the UART state
+ * @param huart uart handle
+ * @retval HAL state
+ */
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart)
+{
+ uint32_t temp1= 0x00U, temp2 = 0x00U;
+ temp1 = huart->gState;
+ temp2 = huart->RxState;
+
+ return (HAL_UART_StateTypeDef)(temp1 | temp2);
+}
+
+/**
+* @brief Return the UART error code
+* @param huart pointer to a UART_HandleTypeDef structure that contains
+ * the configuration information for the specified UART.
+* @retval UART Error Code
+*/
+uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart)
+{
+ return huart->ErrorCode;
+}
+
+/**
+ * @brief Configure the UART peripheral
+ * @param huart uart handle
+ * @retval None
+ */
+HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart)
+{
+ uint32_t tmpreg = 0x00000000U;
+ UART_ClockSourceTypeDef clocksource = UART_CLOCKSOURCE_UNDEFINED;
+ uint16_t brrtemp = 0x0000U;
+ uint16_t usartdiv = 0x0000U;
+ HAL_StatusTypeDef ret = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate));
+ assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength));
+ assert_param(IS_UART_STOPBITS(huart->Init.StopBits));
+ assert_param(IS_UART_PARITY(huart->Init.Parity));
+ assert_param(IS_UART_MODE(huart->Init.Mode));
+ assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl));
+ assert_param(IS_UART_ONE_BIT_SAMPLE(huart->Init.OneBitSampling));
+
+
+ /*-------------------------- USART CR1 Configuration -----------------------*/
+ /* Clear M, PCE, PS, TE, RE and OVER8 bits and configure
+ * the UART Word Length, Parity, Mode and oversampling:
+ * set the M bits according to huart->Init.WordLength value
+ * set PCE and PS bits according to huart->Init.Parity value
+ * set TE and RE bits according to huart->Init.Mode value
+ * set OVER8 bit according to huart->Init.OverSampling value */
+ tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ;
+ MODIFY_REG(huart->Instance->CR1, UART_CR1_FIELDS, tmpreg);
+
+ /*-------------------------- USART CR2 Configuration -----------------------*/
+ /* Configure the UART Stop Bits: Set STOP[13:12] bits according
+ * to huart->Init.StopBits value */
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits);
+
+ /*-------------------------- USART CR3 Configuration -----------------------*/
+ /* Configure
+ * - UART HardWare Flow Control: set CTSE and RTSE bits according
+ * to huart->Init.HwFlowCtl value
+ * - one-bit sampling method versus three samples' majority rule according
+ * to huart->Init.OneBitSampling */
+ tmpreg = (uint32_t)huart->Init.HwFlowCtl | huart->Init.OneBitSampling ;
+ MODIFY_REG(huart->Instance->CR3, (USART_CR3_RTSE | USART_CR3_CTSE | USART_CR3_ONEBIT), tmpreg);
+
+ /*-------------------------- USART BRR Configuration -----------------------*/
+ UART_GETCLOCKSOURCE(huart, clocksource);
+
+ /* Check UART Over Sampling to set Baud Rate Register */
+ if (huart->Init.OverSampling == UART_OVERSAMPLING_8)
+ {
+ switch (clocksource)
+ {
+ case UART_CLOCKSOURCE_PCLK1:
+ usartdiv = (uint16_t)(UART_DIV_SAMPLING8(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate));
+ break;
+ case UART_CLOCKSOURCE_PCLK2:
+ usartdiv = (uint16_t)(UART_DIV_SAMPLING8(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate));
+ break;
+ case UART_CLOCKSOURCE_HSI:
+ usartdiv = (uint16_t)(UART_DIV_SAMPLING8(HSI_VALUE, huart->Init.BaudRate));
+ break;
+ case UART_CLOCKSOURCE_SYSCLK:
+ usartdiv = (uint16_t)(UART_DIV_SAMPLING8(HAL_RCC_GetSysClockFreq(), huart->Init.BaudRate));
+ break;
+ case UART_CLOCKSOURCE_LSE:
+ usartdiv = (uint16_t)(UART_DIV_SAMPLING8(LSE_VALUE, huart->Init.BaudRate));
+ break;
+ case UART_CLOCKSOURCE_UNDEFINED:
+ default:
+ ret = HAL_ERROR;
+ break;
+ }
+
+ brrtemp = usartdiv & 0xFFF0U;
+ brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U);
+ huart->Instance->BRR = brrtemp;
+ }
+ else
+ {
+ switch (clocksource)
+ {
+ case UART_CLOCKSOURCE_PCLK1:
+ huart->Instance->BRR = (uint16_t)(UART_DIV_SAMPLING16(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate));
+ break;
+ case UART_CLOCKSOURCE_PCLK2:
+ huart->Instance->BRR = (uint16_t)(UART_DIV_SAMPLING16(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate));
+ break;
+ case UART_CLOCKSOURCE_HSI:
+ huart->Instance->BRR = (uint16_t)(UART_DIV_SAMPLING16(HSI_VALUE, huart->Init.BaudRate));
+ break;
+ case UART_CLOCKSOURCE_SYSCLK:
+ huart->Instance->BRR = (uint16_t)(UART_DIV_SAMPLING16(HAL_RCC_GetSysClockFreq(), huart->Init.BaudRate));
+ break;
+ case UART_CLOCKSOURCE_LSE:
+ huart->Instance->BRR = (uint16_t)(UART_DIV_SAMPLING16(LSE_VALUE, huart->Init.BaudRate));
+ break;
+ case UART_CLOCKSOURCE_UNDEFINED:
+ default:
+ ret = HAL_ERROR;
+ break;
+ }
+ }
+
+ return ret;
+
+}
+
+
+/**
+ * @brief Configure the UART peripheral advanced features
+ * @param huart uart handle
+ * @retval None
+ */
+void UART_AdvFeatureConfig(UART_HandleTypeDef *huart)
+{
+ /* Check whether the set of advanced features to configure is properly set */
+ assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit));
+
+ /* if required, configure TX pin active level inversion */
+ if(HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT))
+ {
+ assert_param(IS_UART_ADVFEATURE_TXINV(huart->AdvancedInit.TxPinLevelInvert));
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_TXINV, huart->AdvancedInit.TxPinLevelInvert);
+ }
+
+ /* if required, configure RX pin active level inversion */
+ if(HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXINVERT_INIT))
+ {
+ assert_param(IS_UART_ADVFEATURE_RXINV(huart->AdvancedInit.RxPinLevelInvert));
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_RXINV, huart->AdvancedInit.RxPinLevelInvert);
+ }
+
+ /* if required, configure data inversion */
+ if(HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DATAINVERT_INIT))
+ {
+ assert_param(IS_UART_ADVFEATURE_DATAINV(huart->AdvancedInit.DataInvert));
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert);
+ }
+
+ /* if required, configure RX/TX pins swap */
+ if(HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT))
+ {
+ assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap));
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap);
+ }
+
+ /* if required, configure RX overrun detection disabling */
+ if(HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT))
+ {
+ assert_param(IS_UART_OVERRUN(huart->AdvancedInit.OverrunDisable));
+ MODIFY_REG(huart->Instance->CR3, USART_CR3_OVRDIS, huart->AdvancedInit.OverrunDisable);
+ }
+
+ /* if required, configure DMA disabling on reception error */
+ if(HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DMADISABLEONERROR_INIT))
+ {
+ assert_param(IS_UART_ADVFEATURE_DMAONRXERROR(huart->AdvancedInit.DMADisableonRxError));
+ MODIFY_REG(huart->Instance->CR3, USART_CR3_DDRE, huart->AdvancedInit.DMADisableonRxError);
+ }
+
+ /* if required, configure auto Baud rate detection scheme */
+ if(HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_AUTOBAUDRATE_INIT))
+ {
+ assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATE(huart->AdvancedInit.AutoBaudRateEnable));
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_ABREN, huart->AdvancedInit.AutoBaudRateEnable);
+ /* set auto Baudrate detection parameters if detection is enabled */
+ if(huart->AdvancedInit.AutoBaudRateEnable == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)
+ {
+ assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(huart->AdvancedInit.AutoBaudRateMode));
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_ABRMODE, huart->AdvancedInit.AutoBaudRateMode);
+ }
+ }
+
+ /* if required, configure MSB first on communication line */
+ if(HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_MSBFIRST_INIT))
+ {
+ assert_param(IS_UART_ADVFEATURE_MSBFIRST(huart->AdvancedInit.MSBFirst));
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_MSBFIRST, huart->AdvancedInit.MSBFirst);
+ }
+}
+
+
+
+/**
+ * @brief Check the UART Idle State
+ * @param huart uart handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart)
+{
+ uint32_t tickstart = 0U;
+
+ /* Initialize the UART ErrorCode */
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+
+ /* Init tickstart for timeout managment*/
+ tickstart = HAL_GetTick();
+
+ /* Check if the Transmitter is enabled */
+ if((huart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE)
+ {
+ /* Wait until TEACK flag is set */
+ if(UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK)
+ {
+ /* Timeout Occurred */
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Initialize the UART State */
+ huart->gState= HAL_UART_STATE_READY;
+ huart->RxState= HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the UART transmitter and disables the UART receiver.
+ * @param huart UART handle
+ * @retval HAL status
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart)
+{
+ /* Process Locked */
+ __HAL_LOCK(huart);
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Clear TE and RE bits */
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE));
+ /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */
+ SET_BIT(huart->Instance->CR1, USART_CR1_TE);
+
+ huart->gState= HAL_UART_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the UART receiver and disables the UART transmitter.
+ * @param huart UART handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart)
+{
+ /* Process Locked */
+ __HAL_LOCK(huart);
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Clear TE and RE bits */
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE));
+ /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */
+ SET_BIT(huart->Instance->CR1, USART_CR1_RE);
+
+ huart->gState = HAL_UART_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Transmits break characters.
+ * @param huart UART handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart)
+{
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(huart->Instance));
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Send break characters */
+ SET_BIT(huart->Instance->RQR, UART_SENDBREAK_REQUEST);
+
+ huart->gState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief By default in multiprocessor mode, when the wake up method is set
+ * to address mark, the UART handles only 4-bit long addresses detection;
+ * this API allows to enable longer addresses detection (6-, 7- or 8-bit
+ * long).
+ * @note Addresses detection lengths are: 6-bit address detection in 7-bit data mode,
+ * 7-bit address detection in 8-bit data mode, 8-bit address detection in 9-bit data mode.
+ * @param huart UART handle.
+ * @param AddressLength this parameter can be one of the following values:
+ * @arg @ref UART_ADDRESS_DETECT_4B 4-bit long address
+ * @arg @ref UART_ADDRESS_DETECT_7B 6-, 7- or 8-bit long address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the address length parameter */
+ assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength));
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the address length */
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength);
+
+ /* Enable the Peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* TEACK and/or REACK to check before moving huart->gState to Ready */
+ return (UART_CheckIdleState(huart));
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_UART_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/stm32f7xx_hal_conf.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/stm32f7xx_hal_conf.h
new file mode 100644
index 00000000..0073f113
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/stm32f7xx_hal_conf.h
@@ -0,0 +1,458 @@
+/**
+ ******************************************************************************
+ * @file stm32f7xx_hal_conf.h
+ * @brief HAL configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2019 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_CONF_H
+#define __STM32F7xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+
+/* #define HAL_ADC_MODULE_ENABLED */
+/* #define HAL_CRYP_MODULE_ENABLED */
+/* #define HAL_CAN_MODULE_ENABLED */
+/* #define HAL_CEC_MODULE_ENABLED */
+/* #define HAL_CRC_MODULE_ENABLED */
+/* #define HAL_CRYP_MODULE_ENABLED */
+/* #define HAL_DAC_MODULE_ENABLED */
+/* #define HAL_DCMI_MODULE_ENABLED */
+/* #define HAL_DMA2D_MODULE_ENABLED */
+#define HAL_ETH_MODULE_ENABLED
+/* #define HAL_NAND_MODULE_ENABLED */
+/* #define HAL_NOR_MODULE_ENABLED */
+/* #define HAL_SRAM_MODULE_ENABLED */
+/* #define HAL_SDRAM_MODULE_ENABLED */
+/* #define HAL_HASH_MODULE_ENABLED */
+/* #define HAL_I2S_MODULE_ENABLED */
+/* #define HAL_IWDG_MODULE_ENABLED */
+/* #define HAL_LPTIM_MODULE_ENABLED */
+/* #define HAL_LTDC_MODULE_ENABLED */
+/* #define HAL_QSPI_MODULE_ENABLED */
+/* #define HAL_RNG_MODULE_ENABLED */
+/* #define HAL_RTC_MODULE_ENABLED */
+/* #define HAL_SAI_MODULE_ENABLED */
+/* #define HAL_SD_MODULE_ENABLED */
+/* #define HAL_MMC_MODULE_ENABLED */
+/* #define HAL_SPDIFRX_MODULE_ENABLED */
+/* #define HAL_SPI_MODULE_ENABLED */
+/* #define HAL_TIM_MODULE_ENABLED */
+#define HAL_UART_MODULE_ENABLED
+/* #define HAL_USART_MODULE_ENABLED */
+/* #define HAL_IRDA_MODULE_ENABLED */
+/* #define HAL_SMARTCARD_MODULE_ENABLED */
+/* #define HAL_WWDG_MODULE_ENABLED */
+/* #define HAL_PCD_MODULE_ENABLED */
+/* #define HAL_HCD_MODULE_ENABLED */
+/* #define HAL_DFSDM_MODULE_ENABLED */
+/* #define HAL_DSI_MODULE_ENABLED */
+/* #define HAL_JPEG_MODULE_ENABLED */
+/* #define HAL_MDIOS_MODULE_ENABLED */
+/* #define HAL_SMBUS_MODULE_ENABLED */
+/* #define HAL_MMC_MODULE_ENABLED */
+/* #define HAL_EXTI_MODULE_ENABLED */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief External clock source for I2S peripheral
+ * This value is used by the I2S HAL module to compute the I2S clock source
+ * frequency, this source is inserted directly through I2S_CKIN pad.
+ */
+#if !defined (EXTERNAL_CLOCK_VALUE)
+ #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
+#define USE_RTOS 0U
+#define PREFETCH_ENABLE 0U
+#define ART_ACCLERATOR_ENABLE 0U /* To enable instruction cache and prefetch */
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0 2U
+#define MAC_ADDR1 0U
+#define MAC_ADDR2 0U
+#define MAC_ADDR3 0U
+#define MAC_ADDR4 0U
+#define MAC_ADDR5 0U
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
+#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
+#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
+#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
+
+/* Section 2: PHY configuration section */
+
+/* LAN8742A_PHY_ADDRESS Address*/
+#define LAN8742A_PHY_ADDRESS 0
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
+
+#define PHY_READ_TO ((uint32_t)0x0000FFFFU)
+#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR ((uint16_t)0x00U) /*!< Transceiver Basic Control Register */
+#define PHY_BSR ((uint16_t)0x01U) /*!< Transceiver Basic Status Register */
+
+#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
+#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
+#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
+#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
+#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
+#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
+#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
+
+#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
+#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
+#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
+
+/* Section 4: Extended PHY Registers */
+#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
+
+#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
+#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
+
+#define PHY_ISFR ((uint16_t)0x000BU) /*!< PHY Interrupt Source Flag register Offset */
+#define PHY_ISFR_INT4 ((uint16_t)0x000BU) /*!< PHY Link down inturrupt */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC 0U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f7xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+ #include "stm32f7xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f7xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f7xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f7xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f7xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f7xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f7xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f7xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+ #include "stm32f7xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+ #include "stm32f7xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f7xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+ #include "stm32f7xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+ #include "stm32f7xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f7xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32f7xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32f7xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32f7xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+ #include "stm32f7xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f7xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f7xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f7xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f7xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f7xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f7xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f7xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f7xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f7xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f7xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f7xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f7xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32f7xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f7xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f7xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f7xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f7xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f7xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f7xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f7xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f7xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f7xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f7xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32f7xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f7xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_JPEG_MODULE_ENABLED
+ #include "stm32f7xx_hal_jpeg.h"
+#endif /* HAL_JPEG_MODULE_ENABLED */
+
+#ifdef HAL_MDIOS_MODULE_ENABLED
+ #include "stm32f7xx_hal_mdios.h"
+#endif /* HAL_MDIOS_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f7xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/system_stm32f7xx.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/system_stm32f7xx.c
new file mode 100644
index 00000000..3ad53bde
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/system_stm32f7xx.c
@@ -0,0 +1,285 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f7xx.c
+ * @author MCD Application Team
+ * @brief CMSIS Cortex-M7 Device Peripheral Access Layer System Source File.
+ *
+ * This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f7xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f7xx_system
+ * @{
+ */
+
+/** @addtogroup STM32F7xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32f7xx.h"
+
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F7xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F7xx_System_Private_Defines
+ * @{
+ */
+
+/************************* Miscellaneous Configuration ************************/
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F7xx_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F7xx_System_Private_Variables
+ * @{
+ */
+
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+ uint32_t SystemCoreClock = 16000000;
+ const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+ const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F7xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F7xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system
+ * Initialize the Embedded Flash Interface, the PLL and update the
+ * SystemFrequency variable.
+ * @param None
+ * @retval None
+ */
+void SystemInit(void)
+{
+ /* FPU settings ------------------------------------------------------------*/
+ #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
+ #endif
+ /* Reset the RCC clock configuration to the default reset state ------------*/
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001;
+
+ /* Reset CFGR register */
+ RCC->CFGR = 0x00000000;
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+ /* Reset PLLCFGR register */
+ RCC->PLLCFGR = 0x24003010;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /* Disable all interrupts */
+ RCC->CIR = 0x00000000;
+
+ /* vector table initialization disabled because this is handled by the OpenBLT
+ * bootloader, right before this program is started. Alternatively, you can
+ * enable this code again as long as you set VECT_TAB_OFFSET to the actual start
+ * address of the vector table. This is not the default start in flash because this
+ * is where the OpenBLT bootloader resides.
+ */
+#if 0
+ #ifdef VECT_TAB_SRAM
+ SCB->VTOR = RAMDTCM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+ #else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+ #endif
+#endif
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f7xx_hal_conf.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f7xx_hal_conf.h file (default value
+ * 25 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate(void)
+{
+ uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case 0x00: /* HSI used as system clock source */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case 0x04: /* HSE used as system clock source */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case 0x08: /* PLL used as system clock source */
+
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+ SYSCLK = PLL_VCO / PLL_P
+ */
+ pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+ pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+
+ if (pllsource != 0)
+ {
+ /* HSE used as PLL clock source */
+ pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+ else
+ {
+ /* HSI used as PLL clock source */
+ pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+
+ pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+ SystemCoreClock = pllvco/pllp;
+ break;
+ default:
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+ /* Compute HCLK frequency --------------------------------------------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK frequency */
+ SystemCoreClock >>= tmp;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/uip/clock-arch.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/uip/clock-arch.c
new file mode 100644
index 00000000..7963bffb
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/uip/clock-arch.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2006, Swedish Institute of Computer Science.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the uIP TCP/IP stack
+ *
+ * $Id: clock-arch.c,v 1.2 2006/06/12 08:00:31 adam Exp $
+ */
+
+/**
+ * \file
+ * Implementation of architecture-specific clock functionality
+ * \author
+ * Adam Dunkels
+ */
+
+#include "header.h"
+#include "clock-arch.h"
+
+/*---------------------------------------------------------------------------*/
+clock_time_t
+clock_time(void)
+{
+ return (clock_time_t)TimerGet();
+}
+/*---------------------------------------------------------------------------*/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/uip/clock-arch.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/uip/clock-arch.h
new file mode 100644
index 00000000..aa97f0e7
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/uip/clock-arch.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2006, Swedish Institute of Computer Science.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the uIP TCP/IP stack
+ *
+ * $Id: clock-arch.h,v 1.2 2006/06/12 08:00:31 adam Exp $
+ */
+
+#ifndef __CLOCK_ARCH_H__
+#define __CLOCK_ARCH_H__
+
+typedef int clock_time_t;
+#define CLOCK_CONF_SECOND 1000
+
+#endif /* __CLOCK_ARCH_H__ */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/uip/netdev.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/uip/netdev.c
new file mode 100644
index 00000000..9c14621f
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/uip/netdev.c
@@ -0,0 +1,293 @@
+/*
+ * Copyright (c) 2001, Swedish Institute of Computer Science.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of the Institute nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Author: Adam Dunkels
+ *
+ * $Id: netdev.c,v 1.8 2006/06/07 08:39:58 adam Exp $
+ */
+
+
+/*---------------------------------------------------------------------------*/
+#include
+#include "header.h"
+#include "uip.h"
+#include "uip_arp.h"
+#include "stm32f7xx.h" /* STM32 CPU and HAL header */
+
+
+/*---------------------------------------------------------------------------*/
+#define NETDEV_DEFAULT_MACADDR0 (0x08)
+#define NETDEV_DEFAULT_MACADDR1 (0x00)
+#define NETDEV_DEFAULT_MACADDR2 (0x27)
+#define NETDEV_DEFAULT_MACADDR3 (0x69)
+#define NETDEV_DEFAULT_MACADDR4 (0x5B)
+#define NETDEV_DEFAULT_MACADDR5 (0x45)
+
+/* Timeout time for transmitting a packet. */
+#define NETDEV_TX_PACKET_TIMEOUT_MS (250u)
+
+
+/*---------------------------------------------------------------------------*/
+ETH_HandleTypeDef heth;
+
+
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+#endif
+__ALIGN_BEGIN ETH_DMADescTypeDef DMARxDscrTab[ETH_RXBUFNB] __ALIGN_END;/* Ethernet Rx MA Descriptor */
+
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+#endif
+__ALIGN_BEGIN ETH_DMADescTypeDef DMATxDscrTab[ETH_TXBUFNB] __ALIGN_END;/* Ethernet Tx DMA Descriptor */
+
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+#endif
+__ALIGN_BEGIN uint8_t Rx_Buff[ETH_RXBUFNB][ETH_RX_BUF_SIZE] __ALIGN_END; /* Ethernet Receive Buffer */
+
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+#endif
+__ALIGN_BEGIN uint8_t Tx_Buff[ETH_TXBUFNB][ETH_TX_BUF_SIZE] __ALIGN_END; /* Ethernet Transmit Buffer */
+
+
+/*---------------------------------------------------------------------------*/
+static struct uip_eth_addr macAddress;
+
+
+/*---------------------------------------------------------------------------*/
+void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
+{
+ GPIO_InitTypeDef GPIO_InitStruct;
+
+ if (heth->Instance == ETH)
+ {
+ /* Ethernet clock enable */
+ __HAL_RCC_ETH_CLK_ENABLE();
+
+ /* ETH GPIO Configuration:
+ * PC1 ------> ETH_MDC
+ * PA1 ------> ETH_REF_CLK
+ * PA2 ------> ETH_MDIO
+ * PA7 ------> ETH_CRS_DV
+ * PC4 ------> ETH_RXD0
+ * PC5 ------> ETH_RXD1
+ * PB13 ------> ETH_TXD1
+ * PG11 ------> ETH_TX_EN
+ * PG13 ------> ETH_TXD0
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_1 | GPIO_PIN_4 | GPIO_PIN_5;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
+ HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+ GPIO_InitStruct.Pin = GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_7;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+ GPIO_InitStruct.Pin = GPIO_PIN_13;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+ GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_13;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
+ HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
+ }
+}
+
+
+/*---------------------------------------------------------------------------*/
+void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
+{
+ if (heth->Instance == ETH)
+ {
+ /* Ethernet clock disable */
+ __HAL_RCC_ETH_CLK_DISABLE();
+
+ /* Reset Ethernet GPIO pin configuration. */
+ HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1 | GPIO_PIN_4 | GPIO_PIN_5);
+ HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_7);
+ HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13);
+ HAL_GPIO_DeInit(GPIOG, GPIO_PIN_11 | GPIO_PIN_13);
+ }
+}
+
+
+/*---------------------------------------------------------------------------*/
+void netdev_init(void)
+{
+ /* Store the default MAC address. */
+ macAddress.addr[0] = NETDEV_DEFAULT_MACADDR0;
+ macAddress.addr[1] = NETDEV_DEFAULT_MACADDR1;
+ macAddress.addr[2] = NETDEV_DEFAULT_MACADDR2;
+ macAddress.addr[3] = NETDEV_DEFAULT_MACADDR3;
+ macAddress.addr[4] = NETDEV_DEFAULT_MACADDR4;
+ macAddress.addr[5] = NETDEV_DEFAULT_MACADDR5;
+
+ /* Initialize Ethernet. */
+ heth.Instance = ETH;
+ heth.Init.AutoNegotiation = ETH_AUTONEGOTIATION_ENABLE;
+ heth.Init.PhyAddress = LAN8742A_PHY_ADDRESS;
+ heth.Init.MACAddr = &(macAddress.addr)[0];
+ heth.Init.RxMode = ETH_RXPOLLING_MODE;
+ heth.Init.ChecksumMode = ETH_CHECKSUM_BY_HARDWARE;
+ heth.Init.MediaInterface = ETH_MEDIA_INTERFACE_RMII;
+ (void)HAL_ETH_Init(&heth);
+
+ /* Initialize Tx Descriptors list: Chain Mode */
+ HAL_ETH_DMATxDescListInit(&heth, DMATxDscrTab, &Tx_Buff[0][0], ETH_TXBUFNB);
+ /* Initialize Rx Descriptors list: Chain Mode */
+ HAL_ETH_DMARxDescListInit(&heth, DMARxDscrTab, &Rx_Buff[0][0], ETH_RXBUFNB);
+ /* Enable MAC and DMA transmission and reception */
+ HAL_ETH_Start(&heth);
+}
+
+
+/*---------------------------------------------------------------------------*/
+void netdev_init_mac(void)
+{
+ /* Configure the MAC address */
+ uip_setethaddr(macAddress);
+}
+
+
+/*---------------------------------------------------------------------------*/
+void netdev_get_mac(unsigned char * mac_addr)
+{
+ mac_addr[0] = macAddress.addr[0];
+ mac_addr[1] = macAddress.addr[1];
+ mac_addr[2] = macAddress.addr[2];
+ mac_addr[3] = macAddress.addr[3];
+ mac_addr[4] = macAddress.addr[4];
+ mac_addr[5] = macAddress.addr[5];
+}
+
+
+/*---------------------------------------------------------------------------*/
+unsigned int netdev_read(void)
+{
+ unsigned int result = 0;
+ uint16_t len = 0;
+ uint8_t * buffer;
+ __IO ETH_DMADescTypeDef *dmarxdesc;
+
+ /* Check if a new frame was received. */
+ if (HAL_ETH_GetReceivedFrame(&heth) == HAL_OK)
+ {
+ /* Obtain the size of the packet and a pointer to the buffer with packet data. */
+ len = heth.RxFrameInfos.length;
+ buffer = (uint8_t *)heth.RxFrameInfos.buffer;
+ /* Copy the received packet data into the uip buffer. */
+ memcpy(uip_buf, buffer, len);
+ /* Obtain pointer to the reception DMA descriptor. */
+ dmarxdesc = heth.RxFrameInfos.FSRxDesc;
+ /* Give the buffer back to DMA by setting the Own-bit in the reception descriptor. */
+ dmarxdesc->Status |= ETH_DMARXDESC_OWN;
+ /* Clear the segment count. */
+ heth.RxFrameInfos.SegCount =0;
+ /* When reception buffer unavailable flag is set, clear it and resume reception. */
+ if ((heth.Instance->DMASR & ETH_DMASR_RBUS) != (uint32_t)RESET)
+ {
+ /* Clear RBUS ETHERNET DMA flag */
+ heth.Instance->DMASR = ETH_DMASR_RBUS;
+ /* Resume DMA reception */
+ heth.Instance->DMARPDR = 0;
+ }
+ /* Update the result. */
+ result = len;
+ }
+ /* Give the result back to the caller. */
+ return result;
+}
+
+
+/*---------------------------------------------------------------------------*/
+void netdev_send(void)
+{
+ uint8_t * buffer;
+ __IO ETH_DMADescTypeDef *DmaTxDesc;
+ uint32_t framelength;
+ uint32_t timeout;
+ ErrorStatus errorStatus = SUCCESS;
+
+ /* Obtain pointer to the transmission DMA descriptor. */
+ DmaTxDesc = heth.TxDesc;
+ /* Set timeout time to wait for the DMA buffer to become available. */
+ timeout = TimerGet() + NETDEV_TX_PACKET_TIMEOUT_MS;
+ /* Only continue with packet transmission of the buffer is available. */
+ while ((DmaTxDesc->Status & ETH_DMATXDESC_OWN) != (uint32_t)RESET)
+ {
+ /* Break loop upon timeout. This would indicate a hardware failure. */
+ if (TimerGet() > timeout)
+ {
+ /* Update the error status. */
+ errorStatus = ERROR;
+ break;
+ }
+ }
+ /* Only continue with transmission if not error was detected. */
+ if (errorStatus == SUCCESS)
+ {
+ /* Store the framelength. */
+ framelength = uip_len;
+ /* Obtain pointer to write the packet data to. */
+ buffer = (uint8_t *)(heth.TxDesc->Buffer1Addr);
+ /* Copy the packet data to the buffer. */
+ memcpy(buffer, uip_buf, framelength);
+ /* Prepare transmit descriptors to give to DMA. */
+ HAL_ETH_TransmitFrame(&heth, framelength);
+ }
+
+ /* When Transmit Underflow flag is set, clear it and issue a Transmit Poll Demand to
+ * resume transmission.
+ */
+ if ((heth.Instance->DMASR & ETH_DMASR_TUS) != (uint32_t)RESET)
+ {
+ /* Clear TUS ETHERNET DMA flag. */
+ heth.Instance->DMASR = ETH_DMASR_TUS;
+ /* Resume DMA transmission. */
+ heth.Instance->DMATPDR = 0;
+ }
+}
+
+
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/uip/netdev.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/uip/netdev.h
new file mode 100644
index 00000000..832524d6
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/uip/netdev.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2001, Adam Dunkels.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by Adam Dunkels.
+ * 4. The name of the author may not be used to endorse or promote
+ * products derived from this software without specific prior
+ * written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * This file is part of the uIP TCP/IP stack.
+ *
+ * $Id: netdev.h,v 1.1 2002/01/10 06:22:56 adam Exp $
+ *
+ */
+
+#ifndef __NETDEV_H__
+#define __NETDEV_H__
+
+void netdev_init(void);
+void netdev_init_mac(void);
+void netdev_get_mac(unsigned char * mac_addr);
+unsigned int netdev_read(void);
+void netdev_send(void);
+
+#endif /* __NETDEV_H__ */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/uip/uip-conf.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/uip/uip-conf.h
new file mode 100644
index 00000000..3d966a84
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/lib/uip/uip-conf.h
@@ -0,0 +1,160 @@
+/**
+ * \addtogroup uipopt
+ * @{
+ */
+
+/**
+ * \name Project-specific configuration options
+ * @{
+ *
+ * uIP has a number of configuration options that can be overridden
+ * for each project. These are kept in a project-specific uip-conf.h
+ * file and all configuration names have the prefix UIP_CONF.
+ */
+
+/*
+ * Copyright (c) 2006, Swedish Institute of Computer Science.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the uIP TCP/IP stack
+ *
+ * $Id: uip-conf.h,v 1.6 2006/06/12 08:00:31 adam Exp $
+ */
+
+/**
+ * \file
+ * An example uIP configuration file
+ * \author
+ * Adam Dunkels
+ */
+
+#ifndef __UIP_CONF_H__
+#define __UIP_CONF_H__
+
+
+/**
+ * 8 bit datatype
+ *
+ * This typedef defines the 8-bit type used throughout uIP.
+ *
+ * \hideinitializer
+ */
+typedef unsigned char u8_t;
+
+/**
+ * 16 bit datatype
+ *
+ * This typedef defines the 16-bit type used throughout uIP.
+ *
+ * \hideinitializer
+ */
+typedef unsigned short u16_t;
+
+/**
+ * Statistics datatype
+ *
+ * This typedef defines the dataype used for keeping statistics in
+ * uIP.
+ *
+ * \hideinitializer
+ */
+typedef unsigned short uip_stats_t;
+
+/**
+ * Maximum number of TCP connections.
+ *
+ * \hideinitializer
+ */
+#define UIP_CONF_MAX_CONNECTIONS 1
+
+/**
+ * Maximum number of listening TCP ports.
+ *
+ * \hideinitializer
+ */
+#define UIP_CONF_MAX_LISTENPORTS 1
+
+/**
+ * UDP support on or off
+ *
+ * \hideinitializer
+ */
+#define UIP_CONF_UDP 1
+
+/**
+ * UDP Maximum Connections
+ *
+ * \hideinitializer
+ */
+#define UIP_CONF_UDP_CONNS 1
+
+/**
+ * UDP checksums on or off
+ *
+ * \hideinitializer
+ */
+#define UIP_CONF_UDP_CHECKSUMS 0
+
+/**
+ * uIP buffer size.
+ *
+ * \hideinitializer
+ */
+#define UIP_CONF_BUFFER_SIZE 1600
+
+/**
+ * CPU byte order.
+ *
+ * \hideinitializer
+ */
+#define UIP_CONF_BYTE_ORDER UIP_LITTLE_ENDIAN
+
+/**
+ * Logging on or off
+ *
+ * \hideinitializer
+ */
+#define UIP_CONF_LOGGING 0
+
+/**
+ * uIP statistics on or off
+ *
+ * \hideinitializer
+ */
+#define UIP_CONF_STATISTICS 0
+
+
+/* Here we include the header file for the application(s) we use in
+ our project. */
+#include "header.h"
+#include "net.h"
+#include "dhcpc.h"
+
+#endif /* __UIP_CONF_H__ */
+
+/** @} */
+/** @} */
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/main.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/main.c
new file mode 100644
index 00000000..30b14408
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/main.c
@@ -0,0 +1,247 @@
+/************************************************************************************//**
+* \file Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/main.c
+* \brief Demo program application source file.
+* \ingroup Prog_ARMCM7_STM32F7_Nucleo_F767ZI_Keil
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2019 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+
+/****************************************************************************************
+* Include files
+****************************************************************************************/
+#include "header.h" /* generic header */
+
+
+/****************************************************************************************
+* Function prototypes
+****************************************************************************************/
+static void Init(void);
+static void SystemClock_Config(void);
+
+
+/************************************************************************************//**
+** \brief This is the entry point for the bootloader application and is called
+** by the reset interrupt vector after the C-startup routines executed.
+** \return Program exit code.
+**
+****************************************************************************************/
+int main(void)
+{
+ /* Initialize the microcontroller */
+ Init();
+ /* Initialize the shared parameters module */
+ SharedParamsInit();
+ /* initialize the network application */
+ NetInit();
+ /* initialize the bootloader interface */
+ BootComInit();
+ /* the shared parameter at index 0 is used as a boolean flag to indicate if the
+ * bootloader should initialize the TCP/IP network stack. by default this flag
+ * should be reset.
+ */
+ SharedParamsWriteByIndex(0, 0);
+
+ /* start the infinite program loop */
+ while (1)
+ {
+ /* Toggle LED with a fixed frequency. */
+ LedToggle();
+ /* run the network task */
+ NetTask();
+ /* check for bootloader activation request */
+ BootComCheckActivationRequest();
+ }
+ /* Set program exit code. note that the program should never get here. */
+ return 0;
+} /*** end of main ***/
+
+
+/************************************************************************************//**
+** \brief Initializes the microcontroller.
+** \return none.
+**
+****************************************************************************************/
+static void Init(void)
+{
+ /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+ HAL_Init();
+ /* Configure the system clock. */
+ SystemClock_Config();
+ /* Initialize the timer driver. */
+ TimerInit();
+ /* Initialize the led driver. */
+ LedInit();
+} /*** end of Init ***/
+
+
+/************************************************************************************//**
+** \brief System Clock Configuration. This code was created by CubeMX and configures
+** the system clock.
+** \return none.
+**
+****************************************************************************************/
+static void SystemClock_Config(void)
+{
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+
+ /* Configure the main internal regulator output voltage. */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+ /* Initializes the CPU, AHB and APB busses clocks. */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+ RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+ RCC_OscInitStruct.PLL.PLLM = 8;
+ RCC_OscInitStruct.PLL.PLLN = 432;
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+ RCC_OscInitStruct.PLL.PLLQ = 2;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ /* Clock configuration incorrect or hardware failure. Hang the system to prevent
+ * damage.
+ */
+ while(1);
+ }
+
+ /* Activate the Over-Drive mode. */
+ if (HAL_PWREx_EnableOverDrive() != HAL_OK)
+ {
+ /* Clock overdrive hardware failure. Hang the system to prevent damage.
+ */
+ while(1);
+ }
+
+ /* Initializes the CPU, AHB and APB busses clocks. */
+ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK |
+ RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7) != HAL_OK)
+ {
+ /* Clock configuration incorrect or hardware failure. Hang the system to prevent
+ * damage.
+ */
+ while(1);
+ }
+} /*** end of SystemClock_Config ***/
+
+
+/************************************************************************************//**
+** \brief Initializes the Global MSP. This function is called from HAL_Init()
+** function to perform system level initialization (GPIOs, clock, DMA,
+** interrupt).
+** \return none.
+**
+****************************************************************************************/
+void HAL_MspInit(void)
+{
+ GPIO_InitTypeDef GPIO_InitStruct;
+
+ /* Power and SYSCFG clock enable. */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+ /* GPIO ports clock enable. */
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+ __HAL_RCC_GPIOB_CLK_ENABLE();
+ __HAL_RCC_GPIOC_CLK_ENABLE();
+ __HAL_RCC_GPIOD_CLK_ENABLE();
+ __HAL_RCC_GPIOG_CLK_ENABLE();
+#if (BOOT_COM_UART_ENABLE > 0)
+ /* Peripheral clock enable. */
+ __HAL_RCC_USART3_CLK_ENABLE();
+#endif /* BOOT_COM_UART_ENABLE > 0 */
+
+ /* Set priority grouping. */
+ HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+ /* MemoryManagement_IRQn interrupt configuration. */
+ HAL_NVIC_SetPriority(MemoryManagement_IRQn, 0, 0);
+ /* BusFault_IRQn interrupt configuration. */
+ HAL_NVIC_SetPriority(BusFault_IRQn, 0, 0);
+ /* UsageFault_IRQn interrupt configuration. */
+ HAL_NVIC_SetPriority(UsageFault_IRQn, 0, 0);
+ /* SVCall_IRQn interrupt configuration. */
+ HAL_NVIC_SetPriority(SVCall_IRQn, 0, 0);
+ /* DebugMonitor_IRQn interrupt configuration. */
+ HAL_NVIC_SetPriority(DebugMonitor_IRQn, 0, 0);
+ /* PendSV_IRQn interrupt configuration. */
+ HAL_NVIC_SetPriority(PendSV_IRQn, 0, 0);
+ /* SysTick_IRQn interrupt configuration. */
+ HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
+
+ /* Configure the LED GPIO pin. */
+ GPIO_InitStruct.Pin = GPIO_PIN_7;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+#if (BOOT_COM_UART_ENABLE > 0)
+ /* UART TX and RX GPIO pin configuration. */
+ GPIO_InitStruct.Pin = GPIO_PIN_8 | GPIO_PIN_9;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
+ HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+#endif /* BOOT_COM_UART_ENABLE > 0 */
+} /*** end of HAL_MspInit ***/
+
+
+/************************************************************************************//**
+** \brief Deinitializes the Global MSP. This function is called from HAL_DeInit()
+** function to perform system level Deinitialization (GPIOs, clock, DMA,
+** interrupt).
+** \return none.
+**
+****************************************************************************************/
+void HAL_MspDeInit(void)
+{
+#if (BOOT_COM_UART_ENABLE > 0)
+ /* Reset UART GPIO pin configuration. */
+ HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8 | GPIO_PIN_9);
+#endif /* BOOT_COM_UART_ENABLE > 0 */
+ /* Deconfigure GPIO pin for the LED. */
+ HAL_GPIO_WritePin(GPIOB, GPIO_PIN_7, GPIO_PIN_RESET);
+ HAL_GPIO_DeInit(GPIOB, GPIO_PIN_7);
+
+#if (BOOT_COM_UART_ENABLE > 0)
+ /* Peripheral clock disable. */
+ __HAL_RCC_USART3_CLK_DISABLE();
+#endif /* BOOT_COM_UART_ENABLE > 0 */
+ /* GPIO ports clock disable. */
+ __HAL_RCC_GPIOG_CLK_DISABLE();
+ __HAL_RCC_GPIOD_CLK_DISABLE();
+ __HAL_RCC_GPIOC_CLK_DISABLE();
+ __HAL_RCC_GPIOB_CLK_DISABLE();
+ __HAL_RCC_GPIOA_CLK_DISABLE();
+ /* Power and SYSCFG clock disable. */
+ __HAL_RCC_PWR_CLK_DISABLE();
+ __HAL_RCC_SYSCFG_CLK_DISABLE();
+} /*** end of HAL_MspDeInit ***/
+
+
+/*********************************** end of main.c *************************************/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/net.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/net.c
new file mode 100644
index 00000000..06196ab3
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/net.c
@@ -0,0 +1,253 @@
+/************************************************************************************//**
+* \file Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/net.c
+* \brief Network application for the uIP TCP/IP stack.
+* \ingroup Prog_ARMCM7_STM32F7_Nucleo_F767ZI_Keil
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2019 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+
+/****************************************************************************************
+* Include files
+****************************************************************************************/
+#include "header.h" /* generic header */
+#include "netdev.h"
+#include "uip.h"
+#include "uip_arp.h"
+
+
+/****************************************************************************************
+* Macro definitions
+****************************************************************************************/
+/** \brief Delta time for the uIP periodic timer. */
+#define NET_UIP_PERIODIC_TIMER_MS (500)
+/** \brief Delta time for the uIP ARP timer. */
+#define NET_UIP_ARP_TIMER_MS (10000)
+/** \brief Macro for accessing the Ethernet header information in the buffer */
+#define NET_UIP_HEADER_BUF ((struct uip_eth_hdr *)&uip_buf[0])
+
+
+/****************************************************************************************
+* Local data declarations
+****************************************************************************************/
+/** \brief Holds the time out value of the uIP periodic timer. */
+static unsigned long periodicTimerTimeOut;
+/** \brief Holds the time out value of the uIP ARP timer. */
+static unsigned long ARPTimerTimeOut;
+#if (BOOT_COM_NET_DHCP_ENABLE > 0)
+/** \brief Holds the MAC address which is used by the DHCP client. */
+static struct uip_eth_addr macAddress;
+#endif
+
+
+/************************************************************************************//**
+** \brief Initializes the TCP/IP network communication interface.
+** \return none.
+**
+****************************************************************************************/
+void NetInit(void)
+{
+ uip_ipaddr_t ipaddr;
+
+ /* initialize the network device */
+ netdev_init();
+ /* initialize the timer variables */
+ periodicTimerTimeOut = TimerGet() + NET_UIP_PERIODIC_TIMER_MS;
+ ARPTimerTimeOut = TimerGet() + NET_UIP_ARP_TIMER_MS;
+ /* initialize the uIP TCP/IP stack. */
+ uip_init();
+#if (BOOT_COM_NET_DHCP_ENABLE == 0)
+ /* set the IP address */
+ uip_ipaddr(ipaddr, BOOT_COM_NET_IPADDR0, BOOT_COM_NET_IPADDR1, BOOT_COM_NET_IPADDR2,
+ BOOT_COM_NET_IPADDR3);
+ uip_sethostaddr(ipaddr);
+ /* set the network mask */
+ uip_ipaddr(ipaddr, BOOT_COM_NET_NETMASK0, BOOT_COM_NET_NETMASK1, BOOT_COM_NET_NETMASK2,
+ BOOT_COM_NET_NETMASK3);
+ uip_setnetmask(ipaddr);
+ /* set the gateway address */
+ uip_ipaddr(ipaddr, BOOT_COM_NET_GATEWAY0, BOOT_COM_NET_GATEWAY1, BOOT_COM_NET_GATEWAY2,
+ BOOT_COM_NET_GATEWAY3);
+ uip_setdraddr(ipaddr);
+#else
+ /* set the IP address */
+ uip_ipaddr(ipaddr, 0, 0, 0, 0);
+ uip_sethostaddr(ipaddr);
+ /* set the network mask */
+ uip_ipaddr(ipaddr, 0, 0, 0, 0);
+ uip_setnetmask(ipaddr);
+ /* set the gateway address */
+ uip_ipaddr(ipaddr, 0, 0, 0, 0);
+ uip_setdraddr(ipaddr);
+#endif
+ /* start listening on the configured port for XCP transfers on TCP/IP */
+ uip_listen(HTONS(BOOT_COM_NET_PORT));
+ /* initialize the MAC and set the MAC address */
+ netdev_init_mac();
+
+#if (BOOT_COM_NET_DHCP_ENABLE > 0)
+ /* initialize the DHCP client application and send the initial request. */
+ netdev_get_mac(&macAddress.addr[0]);
+ dhcpc_init(&macAddress.addr[0], 6);
+ dhcpc_request();
+#endif
+} /*** end of NetInit ***/
+
+
+/************************************************************************************//**
+** \brief The uIP network application that detects the XCP connect command on the
+** port used by the bootloader. This indicates that the bootloader should
+** be activated.
+** \return none.
+**
+****************************************************************************************/
+void NetApp(void)
+{
+ unsigned char *newDataPtr;
+
+ if (uip_connected())
+ {
+ return;
+ }
+
+ if (uip_newdata())
+ {
+ /* a new XCP command was received. check if this is the connect command and in this
+ * case activate the bootloader. with XCP on TCP/IP the first 4 bytes contain a
+ * counter value in which we are not really interested.
+ */
+ newDataPtr = uip_appdata;
+ newDataPtr += 4;
+ /* check if this was an XCP CONNECT command */
+ if ((newDataPtr[0] == 0xff) && (newDataPtr[1] == 0x00))
+ {
+ /* the shared parameter at index 0 is used as a boolean flag to indicate if the
+ * bootloader should initialize the TCP/IP network stack. we just received a
+ * firmware update request from the TCP/IP network and we are about to active
+ * the bootloader for a firmware update via TCP/IP. At this point we should
+ * set the flag to make sure the bootloader initializes its TCP/IP network stack.
+ */
+ SharedParamsWriteByIndex(0, 1);
+ /* connection request received so start the bootloader */
+ BootActivate();
+ }
+ }
+} /*** end of NetApp ***/
+
+
+/************************************************************************************//**
+** \brief Runs the TCP/IP server task.
+** \return none.
+**
+****************************************************************************************/
+void NetTask(void)
+{
+ unsigned long connection;
+ unsigned long packetLen;
+
+ /* check for an RX packet and read it. */
+ packetLen = netdev_read();
+ if (packetLen > 0)
+ {
+ /* set uip_len for uIP stack usage */
+ uip_len = (unsigned short)packetLen;
+
+ /* process incoming IP packets here. */
+ if (NET_UIP_HEADER_BUF->type == htons(UIP_ETHTYPE_IP))
+ {
+ uip_arp_ipin();
+ uip_input();
+ /* if the above function invocation resulted in data that
+ * should be sent out on the network, the global variable
+ * uip_len is set to a value > 0.
+ */
+ if (uip_len > 0)
+ {
+ uip_arp_out();
+ netdev_send();
+ uip_len = 0;
+ }
+ }
+ /* process incoming ARP packets here. */
+ else if (NET_UIP_HEADER_BUF->type == htons(UIP_ETHTYPE_ARP))
+ {
+ uip_arp_arpin();
+
+ /* if the above function invocation resulted in data that
+ * should be sent out on the network, the global variable
+ * uip_len is set to a value > 0.
+ */
+ if (uip_len > 0)
+ {
+ netdev_send();
+ uip_len = 0;
+ }
+ }
+ }
+
+ /* process TCP/IP Periodic Timer here. */
+ if (TimerGet() >= periodicTimerTimeOut)
+ {
+ periodicTimerTimeOut += NET_UIP_PERIODIC_TIMER_MS;
+ for (connection = 0; connection < UIP_CONNS; connection++)
+ {
+ uip_periodic(connection);
+ /* If the above function invocation resulted in data that
+ * should be sent out on the network, the global variable
+ * uip_len is set to a value > 0.
+ */
+ if (uip_len > 0)
+ {
+ uip_arp_out();
+ netdev_send();
+ uip_len = 0;
+ }
+ }
+
+#if UIP_UDP
+ for (connection = 0; connection < UIP_UDP_CONNS; connection++)
+ {
+ uip_udp_periodic(connection);
+ /* If the above function invocation resulted in data that
+ * should be sent out on the network, the global variable
+ * uip_len is set to a value > 0.
+ */
+ if(uip_len > 0)
+ {
+ uip_arp_out();
+ netdev_send();
+ uip_len = 0;
+ }
+ }
+#endif
+ }
+
+ /* process ARP Timer here. */
+ if (TimerGet() >= ARPTimerTimeOut)
+ {
+ ARPTimerTimeOut += NET_UIP_ARP_TIMER_MS;
+ uip_arp_timer();
+ }
+} /*** end of NetServerTask ***/
+
+
+/*********************************** end of net.c **************************************/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/net.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/net.h
new file mode 100644
index 00000000..8af3739a
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/net.h
@@ -0,0 +1,61 @@
+/************************************************************************************//**
+* \file Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/net.h
+* \brief Network application for the uIP TCP/IP stack.
+* \ingroup Prog_ARMCM7_STM32F7_Nucleo_F767ZI_Keil
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2019 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+#ifndef NET_H
+#define NET_H
+
+/****************************************************************************************
+* Macro definitions
+****************************************************************************************/
+#ifndef UIP_APPCALL
+#define UIP_APPCALL NetApp
+#endif /* UIP_APPCALL */
+
+
+/****************************************************************************************
+* Type definitions
+****************************************************************************************/
+/** \brief Define the uip_tcp_appstate_t datatype. This is the state of our tcp/ip
+ * application, and the memory required for this state is allocated together
+ * with each TCP connection. One application state for each TCP connection.
+ */
+typedef struct net_state
+{
+ unsigned char unused;
+} uip_tcp_appstate_t;
+
+
+/****************************************************************************************
+* Function prototypes
+****************************************************************************************/
+void NetInit(void);
+void NetApp(void);
+void NetTask(void);
+
+
+#endif /* NET_H */
+/*********************************** end of net.h **************************************/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/prog.dox b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/prog.dox
new file mode 100644
index 00000000..2e434ec6
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/prog.dox
@@ -0,0 +1,16 @@
+/**
+\defgroup Prog_ARMCM7_STM32F7_Nucleo_F767ZI_Keil User Program
+\ingroup ARMCM7_STM32F7_Nucleo_F767ZI_Keil
+\brief User Program.
+\details The intention of the demo user program is two-fold. (1) To test the
+ bootloader, you need some sort of firmware to see if you can perform a
+ firmware update with the bootloader. This program can be used for this
+ purpose. (2) To make firmware programmable by the bootloader, a few
+ adjustments to the firmware are required. The demo user program serves as an
+ example for how these adjustments can be implemented. Additional details on
+ this subject can be found in the port specifics documentation, which is
+ available at:
+ https://www.feaser.com/openblt/doku.php?id=manual:ports:armcm7_stm32f7.
+*/
+
+
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/shared_params.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/shared_params.c
new file mode 100644
index 00000000..7e17b9f7
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/shared_params.c
@@ -0,0 +1,301 @@
+/************************************************************************************//**
+* \file Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/shared_params.c
+* \brief Shared RAM parameters source file.
+* \ingroup Prog_ARMCM7_STM32F7_Nucleo_F767ZI_Keil
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2019 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+
+/****************************************************************************************
+* Include files
+****************************************************************************************/
+#include /* Standard definitions (NULL). */
+#include "shared_params.h" /* Shared parameters header. */
+
+
+/****************************************************************************************
+* Macro definitions
+****************************************************************************************/
+/** \brief Constant parameter buffer identifier. This value is always located as the
+ * start of the buffer to validate the the RAM contains valid shared parameters.
+ */
+#define SHARED_PARAMS_BUFFER_ID (0xCE42E7A2u)
+
+
+/****************************************************************************************
+* Type definitions
+****************************************************************************************/
+/** \brief Layout of the shared parameters RAM buffer. */
+typedef struct t_shared_params_buffer
+{
+ /** \brief Fixed buffer identifier to validate that the RAM contains valid shared
+ * parameters.
+ */
+ uint32_t identifier;
+ /** \brief Array for the actual parameter data. */
+ uint8_t data[SHARED_PARAMS_CFG_BUFFER_DATA_LEN];
+ /** \brief Checksum value of all the bytes in the buffer, excluding this checksum
+ * value of obvious reasons. The checksum is calculated as the Two's
+ * complement of the sum of the bytes.
+ */
+ uint16_t checksum;
+} tSharedParamsBuffer;
+
+
+/****************************************************************************************
+* Global data declarations
+****************************************************************************************/
+/** \brief Declaration of the actual parameter buffer that this module manages.
+ * \warning For the shared RAM parameters to work properly for sharing information
+ * between the bootloader and user program, it is important that this
+ * variable is linked to the exact same RAM address in both the bootloader
+ * and the user program. Additionally, it should be configured such that the
+ * C-startup code does NOT zero its contents during system initialization. This
+ * is the code that runs in the reset event handler, before function main() is
+ * called.
+ * For GCC based embedded toolchains, the solution is to assign this variable
+ * to a custom section, in this case called ".shared". Then in the linker
+ * script, add the following to the SECTIONS:
+ *
+ * .shared (NOLOAD) :
+ * {
+ * . = ALIGN(4);
+ * _sshared = .;
+ * __shared_start__ = _sshared;
+ * *(.shared)
+ * *(.shared.*)
+ * KEEP(*(.shared))
+ * . = ALIGN(4);
+ * _eshared = .;
+ * __shared_end__ = _eshared;
+ * } >SHARED
+ *
+ * Next, add a new MEMORY entry for SHARED at the start of RAM and reduce
+ * the length of the remaining RAM:
+ *
+ * SHARED (xrw) : ORIGIN = 0x200000C0, LENGTH = 64
+ * RAM (xrw) : ORIGIN = 0x20000100, LENGTH = 32K - 192 - 64
+ *
+ * Note that the previous example is for an STM32F0 microcontroller where
+ * the first 192 (0xC0) bytes in RAM are reserved for the user program
+ * vector table.
+ *
+ * \remark This same approach can be applied with other toolchains such as Keil MDK
+ * and IAR EWARM. Consult the compiler and linker user manuals of your
+ * toolchain to find out how to place a RAM variable at a fixed memory address
+ * and to prevent the C-startup code from zeroing its contents.
+ * Here are a few links to get you started:
+ * * IAR EWARM:
+ * https://www.iar.com/support/tech-notes/compiler/
+ * linker-error-for-absolute-located-variable/
+ * * Keil MDK:
+ * http://www.keil.com/support/docs/3480.htm
+ */
+static tSharedParamsBuffer sharedParamsBuffer __attribute__((section("shared"),zero_init));
+
+
+/****************************************************************************************
+* Function prototypes
+****************************************************************************************/
+static bool SharedParamsValidateBuffer(void);
+static void SharedParamsWriteChecksum(void);
+static bool SharedParamsVerifyChecksum(void);
+static uint16_t SharedParamsCalculateChecksum(void);
+
+
+/************************************************************************************//**
+** \brief Initializes the shared RAM parameters module.
+** \return none.
+**
+****************************************************************************************/
+void SharedParamsInit(void)
+{
+ uint32_t byteIdx;
+
+ /* The shared parameter buffer does not get initialized by the C-startup code. Another
+ * previously running program could have initialized it, in which case it is ready
+ * for use and nothing more needs to be done.
+ */
+ if (!SharedParamsValidateBuffer())
+ {
+ /* The shared parameter buffer was not yet initialized by a running program. This
+ * typically happens after a cold reset where the RAM contents were lost. In this
+ * case we need to explicitly configure and initialize it, since the C-startup code
+ * was configured to not do this.
+ *
+ * The initialization consists of setting the buffer identifier, zeroing the
+ * actual parameter data and updating the checksum at the end.
+ */
+ sharedParamsBuffer.identifier = SHARED_PARAMS_BUFFER_ID;
+ for (byteIdx=0; byteIdx < SHARED_PARAMS_CFG_BUFFER_DATA_LEN; byteIdx++)
+ {
+ sharedParamsBuffer.data[byteIdx] = 0;
+ }
+ SharedParamsWriteChecksum();
+ }
+} /*** end of SharedParamsInit ***/
+
+
+/************************************************************************************//**
+** \brief Reads a data byte from the shared parameter buffer at the specified index.
+** \param idx Index into the parameter data array. A valid value is between 0 and
+** (SHARED_PARAMS_CFG_BUFFER_DATA_LEN - 1).
+** \param value Pointer to where the read data value is stored.
+** \return True if successful, false otherwise.
+**
+****************************************************************************************/
+bool SharedParamsReadByIndex(uint32_t idx, uint8_t * value)
+{
+ bool result = false;
+
+ /* Only continue if the buffer and the specified parameters are valid. */
+ if ( (SharedParamsValidateBuffer()) &&
+ (idx < SHARED_PARAMS_CFG_BUFFER_DATA_LEN) &&
+ (value != NULL) )
+ {
+ /* Read the value and update the result. */
+ *value = sharedParamsBuffer.data[idx];
+ result = true;
+ }
+ /* Give the result back to the caller. */
+ return result;
+} /*** end of SharedParamsReadByIndex ***/
+
+
+/************************************************************************************//**
+** \brief Writes a data byte to the shared parameter buffer at the specified index.
+** \param idx Index into the parameter data array. A valid value is between 0 and
+** (SHARED_PARAMS_CFG_BUFFER_DATA_LEN - 1).
+** \param value Value to write.
+** \return True if successful, false otherwise.
+**
+****************************************************************************************/
+bool SharedParamsWriteByIndex(uint32_t idx, uint8_t value)
+{
+ bool result = false;
+
+ /* Only continue if the buffer and the specified parameters are valid. */
+ if ( (SharedParamsValidateBuffer()) &&
+ (idx < SHARED_PARAMS_CFG_BUFFER_DATA_LEN) )
+ {
+ /* Write the value. */
+ sharedParamsBuffer.data[idx] = value;
+ /* Update the checksum since the contents were just changed. */
+ SharedParamsWriteChecksum();
+ /* Update the result. */
+ result = true;
+ }
+ /* Give the result back to the caller. */
+ return result;
+} /*** end of SharedParamsWriteByIndex ***/
+
+
+/************************************************************************************//**
+** \brief Validates the shared parameter buffer contents by looking at the table
+** identifier and verifying its checksum.
+** \return True if successful, false otherwise.
+**
+****************************************************************************************/
+static bool SharedParamsValidateBuffer(void)
+{
+ bool result = false;
+
+ /* Perform validation. */
+ if ( (sharedParamsBuffer.identifier == SHARED_PARAMS_BUFFER_ID) &&
+ (SharedParamsVerifyChecksum()) )
+ {
+ /* The shared parameter buffer is valid, so update the result value. */
+ result = true;
+ }
+ /* Give the result back to the caller. */
+ return result;
+} /*** end of SharedParamsValitabeTable ***/
+
+
+/************************************************************************************//**
+** \brief Calculates and writes the checksum into the buffer.
+** \return none.
+**
+****************************************************************************************/
+static void SharedParamsWriteChecksum(void)
+{
+ /* Calculate and write the checksum. */
+ sharedParamsBuffer.checksum = SharedParamsCalculateChecksum();
+} /*** end of SharedParamsWriteChecksum ***/
+
+
+/************************************************************************************//**
+** \brief Calculates and verifies the checksum that is currently present in the
+** buffer.
+** \return True is the checksum is correct, false otherwise.
+**
+****************************************************************************************/
+static bool SharedParamsVerifyChecksum(void)
+{
+ bool result = false;
+
+ /* Calculate and verify the checksum. */
+ if (SharedParamsCalculateChecksum() == sharedParamsBuffer.checksum)
+ {
+ /* Checksum is correct, so update the result value. */
+ result = true;
+ }
+ /* Give the result back to the caller. */
+ return result;
+} /*** end of SharedParamsVerifyChecksum ***/
+
+
+/************************************************************************************//**
+** \brief Calculates and returns the checksum value for the current contents in the
+** buffer. The checksum is calculated by taking the sum of all bytes in the
+** parameter buffer (excluding the checksum at the end) and them taking the
+** two's complement value of it.
+** \return The calculated checksum value.
+**
+****************************************************************************************/
+static uint16_t SharedParamsCalculateChecksum(void)
+{
+ uint16_t result = 0;
+ uint32_t byteIdx;
+
+ /* Add the identifier bytes to the checksum. */
+ result += (uint8_t)sharedParamsBuffer.identifier;
+ result += (uint8_t)(sharedParamsBuffer.identifier >> 8u);
+ result += (uint8_t)(sharedParamsBuffer.identifier >> 16u);
+ result += (uint8_t)(sharedParamsBuffer.identifier >> 24u);
+ /* Loop through the parameter data array. */
+ for (byteIdx=0; byteIdx /* Standard integer types. */
+#include /* Standard boolean types. */
+
+
+/****************************************************************************************
+* Configuration macros
+****************************************************************************************/
+/** \brief Configuration macro for specifying the size of the data inside the parameter
+ * buffer. This is the length in bytes of the actual parameter data, so
+ * excluding the bufferId and checksum.
+ */
+#define SHARED_PARAMS_CFG_BUFFER_DATA_LEN (56u)
+
+
+/****************************************************************************************
+* Function prototypes
+****************************************************************************************/
+void SharedParamsInit(void);
+bool SharedParamsReadByIndex(uint32_t idx, uint8_t * value);
+bool SharedParamsWriteByIndex(uint32_t idx, uint8_t value);
+
+
+#endif /* SHARED_PARAMS_H */
+/*********************************** end of shared_params.h ****************************/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/startup_stm32f767xx.s b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/startup_stm32f767xx.s
new file mode 100644
index 00000000..b130feb8
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/startup_stm32f767xx.s
@@ -0,0 +1,520 @@
+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name : startup_stm32f767xx.s
+;* Author : MCD Application Team
+;* Description : STM32F767xx devices vector table for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM7 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+;
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;* 1. Redistributions of source code must retain the above copyright notice,
+;* this list of conditions and the following disclaimer.
+;* 2. Redistributions in binary form must reproduce the above copyright notice,
+;* this list of conditions and the following disclaimer in the documentation
+;* and/or other materials provided with the distribution.
+;* 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* may be used to endorse or promote products derived from this software
+;* without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; Stack Configuration
+; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+
+Stack_Size EQU 0x400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; Heap Configuration
+; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+
+Heap_Size EQU 0x200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window WatchDog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detection
+ DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
+ DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line0
+ DCD EXTI1_IRQHandler ; EXTI Line1
+ DCD EXTI2_IRQHandler ; EXTI Line2
+ DCD EXTI3_IRQHandler ; EXTI Line3
+ DCD EXTI4_IRQHandler ; EXTI Line4
+ DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
+ DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
+ DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
+ DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
+ DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
+ DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
+ DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
+ DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
+ DCD CAN1_TX_IRQHandler ; CAN1 TX
+ DCD CAN1_RX0_IRQHandler ; CAN1 RX0
+ DCD CAN1_RX1_IRQHandler ; CAN1 RX1
+ DCD CAN1_SCE_IRQHandler ; CAN1 SCE
+ DCD EXTI9_5_IRQHandler ; External Line[9:5]s
+ DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
+ DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
+ DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; External Line[15:10]s
+ DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
+ DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
+ DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
+ DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
+ DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
+ DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
+ DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
+ DCD FMC_IRQHandler ; FMC
+ DCD SDMMC1_IRQHandler ; SDMMC1
+ DCD TIM5_IRQHandler ; TIM5
+ DCD SPI3_IRQHandler ; SPI3
+ DCD UART4_IRQHandler ; UART4
+ DCD UART5_IRQHandler ; UART5
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
+ DCD TIM7_IRQHandler ; TIM7
+ DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
+ DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
+ DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
+ DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
+ DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
+ DCD ETH_IRQHandler ; Ethernet
+ DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
+ DCD CAN2_TX_IRQHandler ; CAN2 TX
+ DCD CAN2_RX0_IRQHandler ; CAN2 RX0
+ DCD CAN2_RX1_IRQHandler ; CAN2 RX1
+ DCD CAN2_SCE_IRQHandler ; CAN2 SCE
+ DCD OTG_FS_IRQHandler ; USB OTG FS
+ DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
+ DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
+ DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
+ DCD USART6_IRQHandler ; USART6
+ DCD I2C3_EV_IRQHandler ; I2C3 event
+ DCD I2C3_ER_IRQHandler ; I2C3 error
+ DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out
+ DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In
+ DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI
+ DCD OTG_HS_IRQHandler ; USB OTG HS
+ DCD DCMI_IRQHandler ; DCMI
+ DCD 0 ; Reserved
+ DCD RNG_IRQHandler ; Rng
+ DCD FPU_IRQHandler ; FPU
+ DCD UART7_IRQHandler ; UART7
+ DCD UART8_IRQHandler ; UART8
+ DCD SPI4_IRQHandler ; SPI4
+ DCD SPI5_IRQHandler ; SPI5
+ DCD SPI6_IRQHandler ; SPI6
+ DCD SAI1_IRQHandler ; SAI1
+ DCD LTDC_IRQHandler ; LTDC
+ DCD LTDC_ER_IRQHandler ; LTDC error
+ DCD DMA2D_IRQHandler ; DMA2D
+ DCD SAI2_IRQHandler ; SAI2
+ DCD QUADSPI_IRQHandler ; QUADSPI
+ DCD LPTIM1_IRQHandler ; LPTIM1
+ DCD CEC_IRQHandler ; HDMI_CEC
+ DCD I2C4_EV_IRQHandler ; I2C4 Event
+ DCD I2C4_ER_IRQHandler ; I2C4 Error
+ DCD SPDIF_RX_IRQHandler ; SPDIF_RX
+ DCD 0 ; Reserved
+ DCD DFSDM1_FLT0_IRQHandler ; DFSDM1 Filter 0 global Interrupt
+ DCD DFSDM1_FLT1_IRQHandler ; DFSDM1 Filter 1 global Interrupt
+ DCD DFSDM1_FLT2_IRQHandler ; DFSDM1 Filter 2 global Interrupt
+ DCD DFSDM1_FLT3_IRQHandler ; DFSDM1 Filter 3 global Interrupt
+ DCD SDMMC2_IRQHandler ; SDMMC2
+ DCD CAN3_TX_IRQHandler ; CAN3 TX
+ DCD CAN3_RX0_IRQHandler ; CAN3 RX0
+ DCD CAN3_RX1_IRQHandler ; CAN3 RX1
+ DCD CAN3_SCE_IRQHandler ; CAN3 SCE
+ DCD JPEG_IRQHandler ; JPEG
+ DCD MDIOS_IRQHandler ; MDIOS
+ DCD 0x55AA11EE ; Reserved for OpenBLT checksum
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+
+ LDR R0, =__initial_sp
+ MOV SP, R0
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMP_STAMP_IRQHandler [WEAK]
+ EXPORT RTC_WKUP_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Stream0_IRQHandler [WEAK]
+ EXPORT DMA1_Stream1_IRQHandler [WEAK]
+ EXPORT DMA1_Stream2_IRQHandler [WEAK]
+ EXPORT DMA1_Stream3_IRQHandler [WEAK]
+ EXPORT DMA1_Stream4_IRQHandler [WEAK]
+ EXPORT DMA1_Stream5_IRQHandler [WEAK]
+ EXPORT DMA1_Stream6_IRQHandler [WEAK]
+ EXPORT ADC_IRQHandler [WEAK]
+ EXPORT CAN1_TX_IRQHandler [WEAK]
+ EXPORT CAN1_RX0_IRQHandler [WEAK]
+ EXPORT CAN1_RX1_IRQHandler [WEAK]
+ EXPORT CAN1_SCE_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK]
+ EXPORT TIM1_UP_TIM10_IRQHandler [WEAK]
+ EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM4_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT I2C2_EV_IRQHandler [WEAK]
+ EXPORT I2C2_ER_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTC_Alarm_IRQHandler [WEAK]
+ EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
+ EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
+ EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
+ EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
+ EXPORT TIM8_CC_IRQHandler [WEAK]
+ EXPORT DMA1_Stream7_IRQHandler [WEAK]
+ EXPORT FMC_IRQHandler [WEAK]
+ EXPORT SDMMC1_IRQHandler [WEAK]
+ EXPORT TIM5_IRQHandler [WEAK]
+ EXPORT SPI3_IRQHandler [WEAK]
+ EXPORT UART4_IRQHandler [WEAK]
+ EXPORT UART5_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT DMA2_Stream0_IRQHandler [WEAK]
+ EXPORT DMA2_Stream1_IRQHandler [WEAK]
+ EXPORT DMA2_Stream2_IRQHandler [WEAK]
+ EXPORT DMA2_Stream3_IRQHandler [WEAK]
+ EXPORT DMA2_Stream4_IRQHandler [WEAK]
+ EXPORT ETH_IRQHandler [WEAK]
+ EXPORT ETH_WKUP_IRQHandler [WEAK]
+ EXPORT CAN2_TX_IRQHandler [WEAK]
+ EXPORT CAN2_RX0_IRQHandler [WEAK]
+ EXPORT CAN2_RX1_IRQHandler [WEAK]
+ EXPORT CAN2_SCE_IRQHandler [WEAK]
+ EXPORT OTG_FS_IRQHandler [WEAK]
+ EXPORT DMA2_Stream5_IRQHandler [WEAK]
+ EXPORT DMA2_Stream6_IRQHandler [WEAK]
+ EXPORT DMA2_Stream7_IRQHandler [WEAK]
+ EXPORT USART6_IRQHandler [WEAK]
+ EXPORT I2C3_EV_IRQHandler [WEAK]
+ EXPORT I2C3_ER_IRQHandler [WEAK]
+ EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK]
+ EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK]
+ EXPORT OTG_HS_WKUP_IRQHandler [WEAK]
+ EXPORT OTG_HS_IRQHandler [WEAK]
+ EXPORT DCMI_IRQHandler [WEAK]
+ EXPORT RNG_IRQHandler [WEAK]
+ EXPORT FPU_IRQHandler [WEAK]
+ EXPORT UART7_IRQHandler [WEAK]
+ EXPORT UART8_IRQHandler [WEAK]
+ EXPORT SPI4_IRQHandler [WEAK]
+ EXPORT SPI5_IRQHandler [WEAK]
+ EXPORT SPI6_IRQHandler [WEAK]
+ EXPORT SAI1_IRQHandler [WEAK]
+ EXPORT LTDC_IRQHandler [WEAK]
+ EXPORT LTDC_ER_IRQHandler [WEAK]
+ EXPORT DMA2D_IRQHandler [WEAK]
+ EXPORT SAI2_IRQHandler [WEAK]
+ EXPORT QUADSPI_IRQHandler [WEAK]
+ EXPORT LPTIM1_IRQHandler [WEAK]
+ EXPORT CEC_IRQHandler [WEAK]
+ EXPORT I2C4_EV_IRQHandler [WEAK]
+ EXPORT I2C4_ER_IRQHandler [WEAK]
+ EXPORT SPDIF_RX_IRQHandler [WEAK]
+ EXPORT DFSDM1_FLT0_IRQHandler [WEAK]
+ EXPORT DFSDM1_FLT1_IRQHandler [WEAK]
+ EXPORT DFSDM1_FLT2_IRQHandler [WEAK]
+ EXPORT DFSDM1_FLT3_IRQHandler [WEAK]
+ EXPORT SDMMC2_IRQHandler [WEAK]
+ EXPORT CAN3_TX_IRQHandler [WEAK]
+ EXPORT CAN3_RX0_IRQHandler [WEAK]
+ EXPORT CAN3_RX1_IRQHandler [WEAK]
+ EXPORT CAN3_SCE_IRQHandler [WEAK]
+ EXPORT JPEG_IRQHandler [WEAK]
+ EXPORT MDIOS_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMP_STAMP_IRQHandler
+RTC_WKUP_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Stream0_IRQHandler
+DMA1_Stream1_IRQHandler
+DMA1_Stream2_IRQHandler
+DMA1_Stream3_IRQHandler
+DMA1_Stream4_IRQHandler
+DMA1_Stream5_IRQHandler
+DMA1_Stream6_IRQHandler
+ADC_IRQHandler
+CAN1_TX_IRQHandler
+CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM9_IRQHandler
+TIM1_UP_TIM10_IRQHandler
+TIM1_TRG_COM_TIM11_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+OTG_FS_WKUP_IRQHandler
+TIM8_BRK_TIM12_IRQHandler
+TIM8_UP_TIM13_IRQHandler
+TIM8_TRG_COM_TIM14_IRQHandler
+TIM8_CC_IRQHandler
+DMA1_Stream7_IRQHandler
+FMC_IRQHandler
+SDMMC1_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+DMA2_Stream0_IRQHandler
+DMA2_Stream1_IRQHandler
+DMA2_Stream2_IRQHandler
+DMA2_Stream3_IRQHandler
+DMA2_Stream4_IRQHandler
+ETH_IRQHandler
+ETH_WKUP_IRQHandler
+CAN2_TX_IRQHandler
+CAN2_RX0_IRQHandler
+CAN2_RX1_IRQHandler
+CAN2_SCE_IRQHandler
+OTG_FS_IRQHandler
+DMA2_Stream5_IRQHandler
+DMA2_Stream6_IRQHandler
+DMA2_Stream7_IRQHandler
+USART6_IRQHandler
+I2C3_EV_IRQHandler
+I2C3_ER_IRQHandler
+OTG_HS_EP1_OUT_IRQHandler
+OTG_HS_EP1_IN_IRQHandler
+OTG_HS_WKUP_IRQHandler
+OTG_HS_IRQHandler
+DCMI_IRQHandler
+RNG_IRQHandler
+FPU_IRQHandler
+UART7_IRQHandler
+UART8_IRQHandler
+SPI4_IRQHandler
+SPI5_IRQHandler
+SPI6_IRQHandler
+SAI1_IRQHandler
+LTDC_IRQHandler
+LTDC_ER_IRQHandler
+DMA2D_IRQHandler
+SAI2_IRQHandler
+QUADSPI_IRQHandler
+LPTIM1_IRQHandler
+CEC_IRQHandler
+I2C4_EV_IRQHandler
+I2C4_ER_IRQHandler
+SPDIF_RX_IRQHandler
+DFSDM1_FLT0_IRQHandler
+DFSDM1_FLT1_IRQHandler
+DFSDM1_FLT2_IRQHandler
+DFSDM1_FLT3_IRQHandler
+SDMMC2_IRQHandler
+CAN3_TX_IRQHandler
+CAN3_RX0_IRQHandler
+CAN3_RX1_IRQHandler
+CAN3_SCE_IRQHandler
+JPEG_IRQHandler
+MDIOS_IRQHandler
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/stm32f767.sct b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/stm32f767.sct
new file mode 100644
index 00000000..7e521c38
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/stm32f767.sct
@@ -0,0 +1,21 @@
+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x08008000 0x001F8000 { ; load region size_region
+ ER_IROM1 0x08008000 0x001F8000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ .ANY (+XO)
+ }
+
+ RW_IRAM1 0x20000000 UNINIT 0x00000040 { ; no init for shared params
+ *(shared)
+ }
+
+ RW_IRAM2 0x20000040 0x0007FFC0 { ; all other RW data
+ .ANY (+RW +ZI)
+ }
+}
+
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/timer.c b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/timer.c
new file mode 100644
index 00000000..d12b2959
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/timer.c
@@ -0,0 +1,77 @@
+/************************************************************************************//**
+* \file Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/timer.c
+* \brief Timer driver source file.
+* \ingroup Prog_ARMCM7_STM32F7_Nucleo_F767ZI_Keil
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2019 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+
+/****************************************************************************************
+* Include files
+****************************************************************************************/
+#include "header.h" /* generic header */
+
+
+/************************************************************************************//**
+** \brief Initializes the timer.
+** \return none.
+**
+****************************************************************************************/
+void TimerInit(void)
+{
+ /* Configure the Systick interrupt time for 1 millisecond. */
+ HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000);
+ /* Configure the Systick. */
+ HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
+ /* SysTick_IRQn interrupt configuration. */
+ HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
+} /*** end of TimerInit ***/
+
+
+/************************************************************************************//**
+** \brief Obtains the counter value of the millisecond timer.
+** \return Current value of the millisecond timer.
+**
+****************************************************************************************/
+unsigned long TimerGet(void)
+{
+ /* Read and return the tick counter value. */
+ return HAL_GetTick();
+} /*** end of TimerGet ***/
+
+
+/************************************************************************************//**
+** \brief Interrupt service routine of the timer.
+** \return none.
+**
+****************************************************************************************/
+void SysTick_Handler(void)
+{
+ /* Increment the tick counter. */
+ HAL_IncTick();
+ /* Invoke the system tick handler. */
+ HAL_SYSTICK_IRQHandler();
+} /*** end of TimerISRHandler ***/
+
+
+/*********************************** end of timer.c ************************************/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/timer.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/timer.h
new file mode 100644
index 00000000..01e658af
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/timer.h
@@ -0,0 +1,38 @@
+/************************************************************************************//**
+* \file Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Prog/timer.h
+* \brief Timer driver header file.
+* \ingroup Prog_ARMCM7_STM32F7_Nucleo_F767ZI_Keil
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2019 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+#ifndef TIMER_H
+#define TIMER_H
+
+/****************************************************************************************
+* Function prototypes
+****************************************************************************************/
+void TimerInit(void);
+unsigned long TimerGet(void);
+
+#endif /* TIMER_H */
+/*********************************** end of timer.h ************************************/
diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/demo.dox b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/demo.dox
new file mode 100644
index 00000000..73ede41e
--- /dev/null
+++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/demo.dox
@@ -0,0 +1,9 @@
+/**
+\defgroup ARMCM7_STM32F7_Nucleo_F767ZI_Keil Demo for Nucleo-F767ZI/Keil
+\ingroup Demos
+\brief Preconfigured programs for the Nucleo-F767ZI board and the Keil MDK toolchain.
+\details For detailed getting started instructions, refer to:
+ https://www.feaser.com/openblt/doku.php?id=manual:demos:nucleo_f767zi_keil.
+*/
+
+