sysmocom
/
openblt
10
0
Fork 0
Code Issues Pull Requests Releases Activity

Refs #981. Added STM32CubeIDE demo programs for the Nucleo-F746ZG board.

Browse Source 
git-svn-id: https://svn.code.sf.net/p/openblt/code/trunk@799 5dc33758-31d5-4daf-9ae8-b24bf3d40d73
master
Frank Voorburg 3 years ago
parent 936c4bce14
commit 7ca8703fce
217 changed files with 235896 additions and 0 deletions
Show Stats Download Patch File Download Diff File

200
Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/.cproject
Unescape View File

@ -0,0 +1,200 @@
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
<storageModule moduleId="org.eclipse.cdt.core.settings">
<cconfiguration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.463937141">
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.463937141" moduleId="org.eclipse.cdt.core.settings" name="Debug">
<externalSettings/>
<extensions>
<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
</extensions>
</storageModule>
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
<configuration artifactExtension="elf" artifactName="openblt_stm32f746" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.debug" cleanCommand="rm -rf" description="" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.463937141" name="Debug" parent="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug">
<folderInfo id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.463937141." name="/" resourcePath="">
<toolChain id="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug.971415616" name="MCU ARM GCC" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug">
<option id="com.st.stm32cube.ide.mcu.option.internal.toolchain.type.2098519147" name="Internal Toolchain Type" superClass="com.st.stm32cube.ide.mcu.option.internal.toolchain.type" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.base.gnu-tools-for-stm32" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.option.internal.toolchain.version.48631213" name="Internal Toolchain Version" superClass="com.st.stm32cube.ide.mcu.option.internal.toolchain.version" useByScannerDiscovery="false" value="7-2018-q2-update" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu.975069891" name="Mcu" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu" useByScannerDiscovery="false" value="STM32F746ZGTx" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid.219901308" name="CpuId" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid" useByScannerDiscovery="false" value="0" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid.410431052" name="CpuCoreId" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid" useByScannerDiscovery="false" value="0" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.396210479" name="Floating-point unit" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.value.fpv5-sp-d16" valueType="enumerated"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.998330354" name="Floating-point ABI" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.value.hard" valueType="enumerated"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.729624059" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="NUCLEO-F746ZG" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.499236790" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.3 || Debug || true || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.base.gnu-tools-for-stm32 || NUCLEO-F746ZG || 0 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../Drivers/CMSIS/Include | ../Drivers/CMSIS/Device/ST/STM32F7xx/Include | ../Core/Inc | ../Drivers/STM32F7xx_HAL_Driver/Inc | ../Drivers/STM32F7xx_HAL_Driver/Inc/Legacy || || || USE_HAL_DRIVER | STM32F746xx | USE_FULL_LL_DRIVER || || Drivers | Core/Startup | Core || || || ${workspace_loc:/${ProjName}/STM32F746ZGTX_FLASH.ld} || true || NonSecure || || secure_nsclib.o || " valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.convertbinary.776359178" name="Convert to binary file (-O binary)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.convertbinary" useByScannerDiscovery="false" value="false" valueType="boolean"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.convertsrec.1452062868" name="Convert to Motorola S-record file (-O srec)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.convertsrec" useByScannerDiscovery="false" value="true" valueType="boolean"/>
<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.834313565" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
<builder buildPath="${workspace_loc:/Boot}/Debug" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder.88921609" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.1124979631" name="MCU GCC Assembler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.1443840690" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.value.g3" valueType="enumerated"/>
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input.1272468837" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input"/>
</tool>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.775366826" name="MCU GCC Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.1393505443" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.value.g3" valueType="enumerated"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.2046864699" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.value.og" valueType="enumerated"/>
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols.147210503" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
<listOptionValue builtIn="false" value="STM32F746xx"/>
<listOptionValue builtIn="false" value="USE_FULL_LL_DRIVER"/>
<listOptionValue builtIn="false" value="DEBUG"/>
</option>
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths.1967857875" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
<listOptionValue builtIn="false" value="../Core/Inc"/>
<listOptionValue builtIn="false" value="../Drivers/STM32F7xx_HAL_Driver/Inc"/>
<listOptionValue builtIn="false" value="../Drivers/STM32F7xx_HAL_Driver/Inc/Legacy"/>
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32F7xx/Include"/>
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include"/>
<listOptionValue builtIn="false" value="../App"/>
<listOptionValue builtIn="false" value="../Library/STM32_USB_Device_Library/Core/Inc"/>
<listOptionValue builtIn="false" value="../USB_DEVICE/App"/>
<listOptionValue builtIn="false" value="../USB_DEVICE/Target"/>
<listOptionValue builtIn="false" value="../../../../Source"/>
<listOptionValue builtIn="false" value="../../../../Source/ARMCM7_STM32F7"/>
</option>
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.683687959" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c"/>
</tool>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.1387787770" name="MCU G++ Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.1084563770" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.value.g3" valueType="enumerated"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.115298657" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level" useByScannerDiscovery="false"/>
</tool>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.1195345753" name="MCU GCC Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script.2017178965" name="Linker Script (-T)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script" useByScannerDiscovery="false" value="../STM32F746ZGTX.ld" valueType="string"/>
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input.231031641" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input">
<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
<additionalInput kind="additionalinput" paths="$(LIBS)"/>
</inputType>
</tool>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.507446216" name="MCU G++ Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.option.script.1600047914" name="Linker Script (-T)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.option.script" value="${workspace_loc:/${ProjName}/STM32F746ZGTX_FLASH.ld}" valueType="string"/>
</tool>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.1184133035" name="MCU GCC Archiver" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.1752422403" name="MCU Size" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.568195016" name="MCU Output Converter list file" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.1926603789" name="MCU Output Converter Hex" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.1098429747" name="MCU Output Converter Binary" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.1246154991" name="MCU Output Converter Verilog" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.2074384180" name="MCU Output Converter Motorola S-rec" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.2021955387" name="MCU Output Converter Motorola S-rec with symbols" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec"/>
</toolChain>
</folderInfo>
<sourceEntries>
<entry flags="VALUE_WORKSPACE_PATH" kind="sourcePath" name="App"/>
<entry flags="VALUE_WORKSPACE_PATH" kind="sourcePath" name="Library"/>
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Core"/>
<entry flags="VALUE_WORKSPACE_PATH" kind="sourcePath" name="Loader"/>
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Drivers"/>
<entry flags="VALUE_WORKSPACE_PATH" kind="sourcePath" name="USB_DEVICE"/>
</sourceEntries>
</configuration>
</storageModule>
<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
</cconfiguration>
<cconfiguration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1174310231">
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1174310231" moduleId="org.eclipse.cdt.core.settings" name="Release">
<externalSettings/>
<extensions>
<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
</extensions>
</storageModule>
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1174310231" name="Release" parent="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release">
<folderInfo id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1174310231." name="/" resourcePath="">
<toolChain id="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release.2107040565" name="MCU ARM GCC" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release">
<option id="com.st.stm32cube.ide.mcu.option.internal.toolchain.type.1105976785" name="Internal Toolchain Type" superClass="com.st.stm32cube.ide.mcu.option.internal.toolchain.type" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.base.gnu-tools-for-stm32" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.option.internal.toolchain.version.763587233" name="Internal Toolchain Version" superClass="com.st.stm32cube.ide.mcu.option.internal.toolchain.version" value="7-2018-q2-update" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu.1851698237" name="Mcu" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_mcu" value="STM32F746ZGTx" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid.1333493686" name="CpuId" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_cpuid" value="0" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid.715008824" name="CpuCoreId" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid" value="0" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.2073411997" name="Floating-point unit" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.fpu.value.fpv5-sp-d16" valueType="enumerated"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.1134387876" name="Floating-point ABI" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.floatabi.value.hard" valueType="enumerated"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.1315979239" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" value="NUCLEO-F746ZG" valueType="string"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.1855710746" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.3 || Release || false || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.base.gnu-tools-for-stm32 || NUCLEO-F746ZG || 0 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../Drivers/CMSIS/Include | ../Drivers/CMSIS/Device/ST/STM32F7xx/Include | ../Core/Inc | ../Drivers/STM32F7xx_HAL_Driver/Inc | ../Drivers/STM32F7xx_HAL_Driver/Inc/Legacy || || || USE_HAL_DRIVER | STM32F746xx | USE_FULL_LL_DRIVER || || Drivers | Core/Startup | Core || || || ${workspace_loc:/${ProjName}/STM32F746ZGTX_FLASH.ld} || true || NonSecure || || secure_nsclib.o || " valueType="string"/>
<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.395867559" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
<builder buildPath="${workspace_loc:/Boot}/Release" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder.1973916530" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.624191326" name="MCU GCC Assembler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.831271183" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.value.g0" valueType="enumerated"/>
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input.34766839" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.input"/>
</tool>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.316241508" name="MCU GCC Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.618687287" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.debuglevel.value.g0" valueType="enumerated"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.1790154846" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.value.os" valueType="enumerated"/>
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols.1682809753" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
<listOptionValue builtIn="false" value="STM32F746xx"/>
<listOptionValue builtIn="false" value="USE_FULL_LL_DRIVER"/>
</option>
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths.532917836" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
<listOptionValue builtIn="false" value="../Core/Inc"/>
<listOptionValue builtIn="false" value="../Drivers/STM32F7xx_HAL_Driver/Inc"/>
<listOptionValue builtIn="false" value="../Drivers/STM32F7xx_HAL_Driver/Inc/Legacy"/>
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32F7xx/Include"/>
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include"/>
</option>
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.530664361" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c"/>
</tool>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.2122658976" name="MCU G++ Compiler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.1681183552" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.debuglevel.value.g0" valueType="enumerated"/>
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.426730611" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.value.os" valueType="enumerated"/>
</tool>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.1392504531" name="MCU GCC Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script.1153480725" name="Linker Script (-T)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script" value="${workspace_loc:/${ProjName}/STM32F746ZGTX_FLASH.ld}" valueType="string"/>
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input.1719603912" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input">
<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
<additionalInput kind="additionalinput" paths="$(LIBS)"/>
</inputType>
</tool>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.1218067212" name="MCU G++ Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker">
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.option.script.814495099" name="Linker Script (-T)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.option.script" value="${workspace_loc:/${ProjName}/STM32F746ZGTX_FLASH.ld}" valueType="string"/>
</tool>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.378665593" name="MCU GCC Archiver" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.1874996042" name="MCU Size" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.1927846029" name="MCU Output Converter list file" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.1156561622" name="MCU Output Converter Hex" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.768031949" name="MCU Output Converter Binary" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.1169915585" name="MCU Output Converter Verilog" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.1054001892" name="MCU Output Converter Motorola S-rec" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec"/>
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.1353927547" name="MCU Output Converter Motorola S-rec with symbols" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec"/>
</toolChain>
</folderInfo>
<sourceEntries>
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Core"/>
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Drivers"/>
</sourceEntries>
</configuration>
</storageModule>
<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
</cconfiguration>
</storageModule>
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
<project id="Boot.null.1496304808" name="Boot"/>
</storageModule>
<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
<storageModule moduleId="scannerConfiguration">
<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1174310231;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1174310231.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.316241508;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.530664361">
<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
</scannerConfigBuildInfo>
<scannerConfigBuildInfo instanceId="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.463937141;com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.463937141.;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.775366826;com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.input.c.683687959">
<autodiscovery enabled="false" problemReportingEnabled="true" selectedProfileId=""/>
</scannerConfigBuildInfo>
</storageModule>
<storageModule moduleId="refreshScope" versionNumber="2">
<configuration configurationName="Debug">
<resource resourceType="PROJECT" workspacePath="/Boot"/>
</configuration>
<configuration configurationName="Release">
<resource resourceType="PROJECT" workspacePath="/Boot"/>
</configuration>
</storageModule>
</cproject>

26
Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/.mxproject
View File

File diff suppressed because one or more lines are too long

66
Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/.project
Unescape View File

@ -0,0 +1,66 @@
<?xml version="1.0" encoding="UTF-8"?>
<projectDescription>
<name>Boot</name>
<comment></comment>
<projects>
</projects>
<buildSpec>
<buildCommand>
<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
<triggers>clean,full,incremental,</triggers>
<arguments>
</arguments>
</buildCommand>
<buildCommand>
<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
<triggers>full,incremental,</triggers>
<arguments>
</arguments>
</buildCommand>
</buildSpec>
<natures>
<nature>com.st.stm32cube.ide.mcu.MCUProjectNature</nature>
<nature>com.st.stm32cube.ide.mcu.MCUCubeProjectNature</nature>
<nature>org.eclipse.cdt.core.cnature</nature>
<nature>com.st.stm32cube.ide.mcu.MCUCubeIdeServicesRevAev2ProjectNature</nature>
<nature>com.st.stm32cube.ide.mcu.MCUAdvancedStructureProjectNature</nature>
<nature>com.st.stm32cube.ide.mcu.MCUEndUserDisabledTrustZoneProjectNature</nature>
<nature>com.st.stm32cube.ide.mcu.MCUSingleCpuProjectNature</nature>
<nature>com.st.stm32cube.ide.mcu.MCURootProjectNature</nature>
<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
</natures>
<linkedResources>
<link>
<name>Loader</name>
<type>2</type>
<locationURI>OPENBLT_ROOT</locationURI>
</link>
</linkedResources>
<filteredResources>
<filter>
<id>1600781841097</id>
<name>Loader</name>
<type>9</type>
<matcher>
<id>org.eclipse.ui.ide.multiFilter</id>
<arguments>1.0-name-matches-false-false-ARMCM7_STM32F7</arguments>
</matcher>
</filter>
<filter>
<id>1600781853092</id>
<name>Loader/ARMCM7_STM32F7</name>
<type>9</type>
<matcher>
<id>org.eclipse.ui.ide.multiFilter</id>
<arguments>1.0-name-matches-false-false-GCC</arguments>
</matcher>
</filter>
</filteredResources>
<variableList>
<variable>
<name>OPENBLT_ROOT</name>
<value>$%7BPARENT-3-PROJECT_LOC%7D/Source</value>
</variable>
</variableList>
</projectDescription>

27
Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/.settings/language.settings.xml
Unescape View File

@ -0,0 +1,27 @@
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<project>
<configuration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.463937141" name="Debug">
<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
<provider copy-of="extension" id="org.eclipse.cdt.managedbuilder.core.GCCBuildCommandParser"/>
<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="661730002489570611" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
<language-scope id="org.eclipse.cdt.core.gcc"/>
<language-scope id="org.eclipse.cdt.core.g++"/>
</provider>
</extension>
</configuration>
<configuration id="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1174310231" name="Release">
<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
<provider copy-of="extension" id="org.eclipse.cdt.managedbuilder.core.GCCBuildCommandParser"/>
<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="661730002489570611" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
<language-scope id="org.eclipse.cdt.core.gcc"/>
<language-scope id="org.eclipse.cdt.core.g++"/>
</provider>
</extension>
</configuration>
</project>

76
Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/App/app.c
Unescape View File

@ -0,0 +1,76 @@
/************************************************************************************//**
* \file Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/App/app.c
* \brief Bootloader application source file.
* \ingroup Boot_ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE
* \internal
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2020 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
/****************************************************************************************
* Include files
****************************************************************************************/
#include "boot.h" /* bootloader generic header */
#include "stm32f7xx.h" /* STM32 CPU and HAL header */
#include "stm32f7xx_ll_rcc.h" /* STM32 LL RCC header */
/************************************************************************************//**
** \brief Initializes the bootloader application. Should be called once during
** software program initialization.
** \return none.
**
****************************************************************************************/
void AppInit(void)
{
/* initialize the bootloader */
BootInit();
} /*** end of AppInit ***/
/************************************************************************************//**
** \brief Task function of the bootloader application. Should be called continuously
** in the program loop.
** \return none.
**
****************************************************************************************/
void AppTask(void)
{
/* Run the bootloader task. */
BootTask();
} /*** end of AppTask ***/
/************************************************************************************//**
** \brief Uninitializes the bootloader application. Should be called right before the
** bootloader starts the user program.
** \return none.
**
****************************************************************************************/
void AppDeInit(void)
{
/* Reset the RCC clock configuration to the default reset state. */
LL_RCC_DeInit();
} /*** end of AppDeInit ***/
/*********************************** end of app.c **************************************/

40
Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/App/app.h
Unescape View File

@ -0,0 +1,40 @@
/************************************************************************************//**
* \file Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/App/app.h
* \brief Bootloader application header file.
* \ingroup Boot_ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE
* \internal
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2020 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
#ifndef APP_H
#define APP_H
/****************************************************************************************
* Function prototypes
****************************************************************************************/
void AppInit(void);
void AppTask(void);
void AppDeInit(void);
#endif /* APP_H */
/*********************************** end of app.h **************************************/

189
Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/App/blt_conf.h
Unescape View File

@ -0,0 +1,189 @@
/************************************************************************************//**
* \file Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/App/blt_conf.h
* \brief Bootloader configuration header file.
* \ingroup Boot_ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE
* \internal
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2020 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
#ifndef BLT_CONF_H
#define BLT_CONF_H
/****************************************************************************************
* C P U D R I V E R C O N F I G U R A T I O N
****************************************************************************************/
/* To properly initialize the baudrate clocks of the communication interface, typically
* the speed of the crystal oscillator and/or the speed at which the system runs is
* needed. Set these through configurables BOOT_CPU_XTAL_SPEED_KHZ and
* BOOT_CPU_SYSTEM_SPEED_KHZ, respectively. To enable data exchange with the host that is
* not dependent on the targets architecture, the byte ordering needs to be known.
* Setting BOOT_CPU_BYTE_ORDER_MOTOROLA to 1 selects big endian mode and 0 selects
* little endian mode.
*
* Set BOOT_CPU_USER_PROGRAM_START_HOOK to 1 if you would like a hook function to be
* called the moment the user program is about to be started. This could be used to
* de-initialize application specific parts, for example to stop blinking an LED, etc.
*/
/** \brief Frequency of the external crystal oscillator. */
#define BOOT_CPU_XTAL_SPEED_KHZ (8000)
/** \brief Desired system speed. */
#define BOOT_CPU_SYSTEM_SPEED_KHZ (216000)
/** \brief Motorola or Intel style byte ordering. */
#define BOOT_CPU_BYTE_ORDER_MOTOROLA (0)
/** \brief Enable/disable hook function call right before user program start. */
#define BOOT_CPU_USER_PROGRAM_START_HOOK (1)
/****************************************************************************************
* C O M M U N I C A T I O N I N T E R F A C E C O N F I G U R A T I O N
****************************************************************************************/
/* The USB communication interface is selected by setting the BOOT_COM_USB_ENABLE
* configurable to 1. The maximum amount of data bytes in a message for data transmission
* and reception is set through BOOT_COM_USB_TX_MAX_DATA and BOOT_COM_USB_RX_MAX_DATA,
* respectively.
*
*/
/** \brief Enable/disable USB transport layer. */
#define BOOT_COM_USB_ENABLE (1)
/** \brief Configure number of bytes in the target->host data packet. */
#define BOOT_COM_USB_TX_MAX_DATA (63)
/** \brief Configure number of bytes in the host->target data packet. */
#define BOOT_COM_USB_RX_MAX_DATA (63)
/* The CAN communication interface is selected by setting the BOOT_COM_CAN_ENABLE
* configurable to 1. Configurable BOOT_COM_CAN_BAUDRATE selects the communication speed
* in bits/second. Two CAN messages are reserved for communication with the host. The
* message identifier for sending data from the target to the host is configured with
* BOOT_COM_CAN_TXMSG_ID. The one for receiving data from the host is configured with
* BOOT_COM_CAN_RXMSG_ID. Note that an extended 29-bit CAN identifier is configured by
* OR-ing with mask 0x80000000. The maximum amount of data bytes in a message for data
* transmission and reception is set through BOOT_COM_CAN_TX_MAX_DATA and
* BOOT_COM_CAN_RX_MAX_DATA, respectively. It is common for a microcontroller to have more
* than 1 CAN controller on board. The zero-based BOOT_COM_CAN_CHANNEL_INDEX selects the
* CAN controller channel.
*
*/
/** \brief Enable/disable CAN transport layer. */
#define BOOT_COM_CAN_ENABLE (1)
/** \brief Configure the desired CAN baudrate. */
#define BOOT_COM_CAN_BAUDRATE (500000)
/** \brief Configure CAN message ID target->host. */
#define BOOT_COM_CAN_TX_MSG_ID (0x7E1 /*| 0x80000000*/)
/** \brief Configure number of bytes in the target->host CAN message. */
#define BOOT_COM_CAN_TX_MAX_DATA (8)
/** \brief Configure CAN message ID host->target. */
#define BOOT_COM_CAN_RX_MSG_ID (0x667 /*| 0x80000000*/)
/** \brief Configure number of bytes in the host->target CAN message. */
#define BOOT_COM_CAN_RX_MAX_DATA (8)
/** \brief Select the desired CAN peripheral as a zero based index. */
#define BOOT_COM_CAN_CHANNEL_INDEX (0)
/* The RS232 communication interface is selected by setting the BOOT_COM_RS232_ENABLE
* configurable to 1. Configurable BOOT_COM_RS232_BAUDRATE selects the communication speed
* in bits/second. The maximum amount of data bytes in a message for data transmission
* and reception is set through BOOT_COM_RS232_TX_MAX_DATA and BOOT_COM_RS232_RX_MAX_DATA,
* respectively. It is common for a microcontroller to have more than 1 UART interface
* on board. The zero-based BOOT_COM_RS232_CHANNEL_INDEX selects the UART interface.
*
*/
/** \brief Enable/disable UART transport layer. */
#define BOOT_COM_RS232_ENABLE (1)
/** \brief Configure the desired communication speed. */
#define BOOT_COM_RS232_BAUDRATE (57600)
/** \brief Configure number of bytes in the target->host data packet. */
#define BOOT_COM_RS232_TX_MAX_DATA (64)
/** \brief Configure number of bytes in the host->target data packet. */
#define BOOT_COM_RS232_RX_MAX_DATA (64)
/** \brief Select the desired UART peripheral as a zero based index. */
#define BOOT_COM_RS232_CHANNEL_INDEX (2)
/****************************************************************************************
* B A C K D O O R E N T R Y C O N F I G U R A T I O N
****************************************************************************************/
/* It is possible to implement an application specific method to force the bootloader to
* stay active after a reset. Such a backdoor entry into the bootloader is desired in
* situations where the user program does not run properly and therefore cannot
* reactivate the bootloader. By enabling these hook functions, the application can
* implement the backdoor, which overrides the default backdoor entry that is programmed
* into the bootloader. When desired for security purposes, these hook functions can
* also be implemented in a way that disables the backdoor entry altogether.
*/
/** \brief Enable/disable the backdoor override hook functions. */
#define BOOT_BACKDOOR_HOOKS_ENABLE (0)
/****************************************************************************************
* N O N - V O L A T I L E M E M O R Y D R I V E R C O N F I G U R A T I O N
****************************************************************************************/
/* The NVM driver typically supports erase and program operations of the internal memory
* present on the microcontroller. Through these hook functions the NVM driver can be
* extended to support additional memory types such as external flash memory and serial
* eeproms. The size of the internal memory in kilobytes is specified with configurable
* BOOT_NVM_SIZE_KB. If desired the internal checksum writing and verification method can
* be overridden with a application specific method by enabling configuration switch
* BOOT_NVM_CHECKSUM_HOOKS_ENABLE.
*/
/** \brief Enable/disable the NVM hook function for supporting additional memory devices. */
#define BOOT_NVM_HOOKS_ENABLE (0)
/** \brief Configure the size of the default memory device (typically flash EEPROM). */
#define BOOT_NVM_SIZE_KB (1024)
/** \brief Enable/disable hooks functions to override the user program checksum handling. */
#define BOOT_NVM_CHECKSUM_HOOKS_ENABLE (0)
/****************************************************************************************
* W A T C H D O G D R I V E R C O N F I G U R A T I O N
****************************************************************************************/
/* The COP driver cannot be configured internally in the bootloader, because its use
* and configuration is application specific. The bootloader does need to service the
* watchdog in case it is used. When the application requires the use of a watchdog,
* set BOOT_COP_HOOKS_ENABLE to be able to initialize and service the watchdog through
* hook functions.
*/
/** \brief Enable/disable the hook functions for controlling the watchdog. */
#define BOOT_COP_HOOKS_ENABLE (1)
/****************************************************************************************
* S E E D / K E Y S E C U R I T Y C O N F I G U R A T I O N
****************************************************************************************/
/* A security mechanism can be enabled in the bootloader's XCP module by setting configu-
* rable BOOT_XCP_SEED_KEY_ENABLE to 1. Before any memory erase or programming
* operations can be performed, access to this resource need to be unlocked.
* In the Microboot settings on tab "XCP Protection" you need to specify a DLL that
* implements the unlocking algorithm. The demo programs are configured for the (simple)
* algorithm in "libseednkey.dll". The source code for this DLL is available so it can be
* customized to your needs.
* During the unlock sequence, Microboot requests a seed from the bootloader, which is in
* the format of a byte array. Using this seed the unlock algorithm in the DLL computes
* a key, which is also a byte array, and sends this back to the bootloader. The
* bootloader then verifies this key to determine if programming and erase operations are
* permitted.
* After enabling this feature the hook functions XcpGetSeedHook() and XcpVerifyKeyHook()
* are called by the bootloader to obtain the seed and to verify the key, respectively.
*/
#define BOOT_XCP_SEED_KEY_ENABLE (0)
#endif /* BLT_CONF_H */
/*********************************** end of blt_conf.h *********************************/

353
Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/App/hooks.c
Unescape View File

@ -0,0 +1,353 @@
/************************************************************************************//**
* \file Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/App/hooks.c
* \brief Bootloader callback source file.
* \ingroup Boot_ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE
* \internal
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2020 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
/****************************************************************************************
* Include files
****************************************************************************************/
#include "boot.h" /* bootloader generic header */
#include "app.h" /* bootloader application header */
#include "led.h" /* LED driver header */
#include "stm32f7xx.h" /* STM32 CPU and HAL header */
#include "stm32f7xx_ll_gpio.h" /* STM32 LL GPIO header */
/****************************************************************************************
* C P U D R I V E R H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_CPU_USER_PROGRAM_START_HOOK > 0)
/************************************************************************************//**
** \brief Callback that gets called when the bootloader is about to exit and
** hand over control to the user program. This is the last moment that
** some final checking can be performed and if necessary prevent the
** bootloader from activiting the user program.
** \return BLT_TRUE if it is okay to start the user program, BLT_FALSE to keep
** keep the bootloader active.
**
****************************************************************************************/
blt_bool CpuUserProgramStartHook(void)
{
/* additional and optional backdoor entry through the pushbutton on the board. to
* force the bootloader to stay active after reset, keep the pushbutton pressed while
* resetting the microcontroller.
*/
if (LL_GPIO_IsInputPinSet(GPIOC, LL_GPIO_PIN_13) != 0)
{
/* pushbutton pressed, so do not start the user program and keep the
* bootloader active instead.
*/
return BLT_FALSE;
}
/* clean up the LED driver */
LedBlinkExit();
/* clean up the application. */
AppDeInit();
/* okay to start the user program.*/
return BLT_TRUE;
} /*** end of CpuUserProgramStartHook ***/
#endif /* BOOT_CPU_USER_PROGRAM_START_HOOK > 0 */
/****************************************************************************************
* W A T C H D O G D R I V E R H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_COP_HOOKS_ENABLE > 0)
/************************************************************************************//**
** \brief Callback that gets called at the end of the internal COP driver
** initialization routine. It can be used to configure and enable the
** watchdog.
** \return none.
**
****************************************************************************************/
void CopInitHook(void)
{
/* this function is called upon initialization. might as well use it to initialize
* the LED driver. It is kind of a visual watchdog anyways.
*/
LedBlinkInit(100);
} /*** end of CopInitHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the end of the internal COP driver
** service routine. This gets called upon initialization and during
** potential long lasting loops and routine. It can be used to service
** the watchdog to prevent a watchdog reset.
** \return none.
**
****************************************************************************************/
void CopServiceHook(void)
{
/* run the LED blink task. this is a better place to do it than in the main() program
* loop. certain operations such as flash erase can take a long time, which would cause
* a blink interval to be skipped. this function is also called during such operations,
* so no blink intervals will be skipped when calling the LED blink task here.
*/
LedBlinkTask();
} /*** end of CopServiceHook ***/
#endif /* BOOT_COP_HOOKS_ENABLE > 0 */
/****************************************************************************************
* U S B C O M M U N I C A T I O N I N T E R F A C E H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_COM_USB_ENABLE > 0)
/************************************************************************************//**
** \brief Callback that gets called whenever the USB device should be connected
** to the USB bus.
** \param connect BLT_TRUE to connect and BLT_FALSE to disconnect.
** \return none.
**
****************************************************************************************/
void UsbConnectHook(blt_bool connect)
{
/* Note that this is handled automatically by the OTG peripheral. */
} /*** end of UsbConnect ***/
/************************************************************************************//**
** \brief Callback that gets called whenever the USB host requests the device
** to enter a low power mode.
** \return none.
**
****************************************************************************************/
void UsbEnterLowPowerModeHook(void)
{
/* support to enter a low power mode can be implemented here */
} /*** end of UsbEnterLowPowerMode ***/
/************************************************************************************//**
** \brief Callback that gets called whenever the USB host requests the device to
** exit low power mode.
** \return none.
**
****************************************************************************************/
void UsbLeaveLowPowerModeHook(void)
{
/* support to leave a low power mode can be implemented here */
} /*** end of UsbLeaveLowPowerMode ***/
#endif /* BOOT_COM_USB_ENABLE > 0 */
/****************************************************************************************
* B A C K D O O R E N T R Y H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_BACKDOOR_HOOKS_ENABLE > 0)
/************************************************************************************//**
** \brief Initializes the backdoor entry option.
** \return none.
**
****************************************************************************************/
void BackDoorInitHook(void)
{
} /*** end of BackDoorInitHook ***/
/************************************************************************************//**
** \brief Checks if a backdoor entry is requested.
** \return BLT_TRUE if the backdoor entry is requested, BLT_FALSE otherwise.
**
****************************************************************************************/
blt_bool BackDoorEntryHook(void)
{
/* default implementation always activates the bootloader after a reset */
return BLT_TRUE;
} /*** end of BackDoorEntryHook ***/
#endif /* BOOT_BACKDOOR_HOOKS_ENABLE > 0 */
/****************************************************************************************
* N O N - V O L A T I L E M E M O R Y D R I V E R H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_NVM_HOOKS_ENABLE > 0)
/************************************************************************************//**
** \brief Callback that gets called at the start of the internal NVM driver
** initialization routine.
** \return none.
**
****************************************************************************************/
void NvmInitHook(void)
{
} /*** end of NvmInitHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the start of a firmware update to reinitialize
** the NVM driver.
** \return none.
**
****************************************************************************************/
void NvmReinitHook(void)
{
} /*** end of NvmReinitHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the start of the NVM driver write
** routine. It allows additional memory to be operated on. If the address
** is not within the range of the additional memory, then
** BLT_NVM_NOT_IN_RANGE must be returned to indicate that the data hasn't
** been written yet.
** \param addr Start address.
** \param len Length in bytes.
** \param data Pointer to the data buffer.
** \return BLT_NVM_OKAY if successful, BLT_NVM_NOT_IN_RANGE if the address is
** not within the supported memory range, or BLT_NVM_ERROR is the write
** operation failed.
**
****************************************************************************************/
blt_int8u NvmWriteHook(blt_addr addr, blt_int32u len, blt_int8u *data)
{
return BLT_NVM_NOT_IN_RANGE;
} /*** end of NvmWriteHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the start of the NVM driver erase
** routine. It allows additional memory to be operated on. If the address
** is not within the range of the additional memory, then
** BLT_NVM_NOT_IN_RANGE must be returned to indicate that the memory
** hasn't been erased yet.
** \param addr Start address.
** \param len Length in bytes.
** \return BLT_NVM_OKAY if successful, BLT_NVM_NOT_IN_RANGE if the address is
** not within the supported memory range, or BLT_NVM_ERROR is the erase
** operation failed.
**
****************************************************************************************/
blt_int8u NvmEraseHook(blt_addr addr, blt_int32u len)
{
return BLT_NVM_NOT_IN_RANGE;
} /*** end of NvmEraseHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the end of the NVM programming session.
** \return BLT_TRUE is successful, BLT_FALSE otherwise.
**
****************************************************************************************/
blt_bool NvmDoneHook(void)
{
return BLT_TRUE;
} /*** end of NvmDoneHook ***/
#endif /* BOOT_NVM_HOOKS_ENABLE > 0 */
#if (BOOT_NVM_CHECKSUM_HOOKS_ENABLE > 0)
/************************************************************************************//**
** \brief Verifies the checksum, which indicates that a valid user program is
** present and can be started.
** \return BLT_TRUE if successful, BLT_FALSE otherwise.
**
****************************************************************************************/
blt_bool NvmVerifyChecksumHook(void)
{
return BLT_TRUE;
} /*** end of NvmVerifyChecksum ***/
/************************************************************************************//**
** \brief Writes a checksum of the user program to non-volatile memory. This is
** performed once the entire user program has been programmed. Through
** the checksum, the bootloader can check if a valid user programming is
** present and can be started.
** \return BLT_TRUE if successful, BLT_FALSE otherwise.
**
****************************************************************************************/
blt_bool NvmWriteChecksumHook(void)
{
return BLT_TRUE;
}
#endif /* BOOT_NVM_CHECKSUM_HOOKS_ENABLE > 0 */
/****************************************************************************************
* S E E D / K E Y S E C U R I T Y H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_XCP_SEED_KEY_ENABLE > 0)
/************************************************************************************//**
** \brief Provides a seed to the XCP master that will be used for the key
** generation when the master attempts to unlock the specified resource.
** Called by the GET_SEED command.
** \param resource Resource that the seed if requested for (XCP_RES_XXX).
** \param seed Pointer to byte buffer wher the seed will be stored.
** \return Length of the seed in bytes.
**
****************************************************************************************/
blt_int8u XcpGetSeedHook(blt_int8u resource, blt_int8u *seed)
{
/* request seed for unlocking ProGraMming resource */
if ((resource & XCP_RES_PGM) != 0)
{
seed[0] = 0x55;
}
/* return seed length */
return 1;
} /*** end of XcpGetSeedHook ***/
/************************************************************************************//**
** \brief Called by the UNLOCK command and checks if the key to unlock the
** specified resource was correct. If so, then the resource protection
** will be removed.
** \param resource resource to unlock (XCP_RES_XXX).
** \param key pointer to the byte buffer holding the key.
** \param len length of the key in bytes.
** \return 1 if the key was correct, 0 otherwise.
**
****************************************************************************************/
blt_int8u XcpVerifyKeyHook(blt_int8u resource, blt_int8u *key, blt_int8u len)
{
/* suppress compiler warning for unused parameter */
len = len;
/* the example key algorithm in "libseednkey.dll" works as follows:
* - PGM will be unlocked if key = seed - 1
*/
/* check key for unlocking ProGraMming resource */
if ((resource == XCP_RES_PGM) && (key[0] == (0x55-1)))
{
/* correct key received for unlocking PGM resource */
return 1;
}
/* still here so key incorrect */
return 0;
} /*** end of XcpVerifyKeyHook ***/
#endif /* BOOT_XCP_SEED_KEY_ENABLE > 0 */
/*********************************** end of hooks.c ************************************/

101
Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/App/led.c
Unescape View File

@ -0,0 +1,101 @@
/************************************************************************************//**
* \file Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/App/led.c
* \brief LED driver source file.
* \ingroup Boot_ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE
* \internal
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2020 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
/****************************************************************************************
* Include files
****************************************************************************************/
#include "boot.h" /* bootloader generic header */
#include "led.h" /* module header */
#include "stm32f7xx.h" /* STM32 CPU and HAL header */
#include "stm32f7xx_ll_gpio.h" /* STM32 LL GPIO header */
/****************************************************************************************
* Local data declarations
****************************************************************************************/
/** \brief Holds the desired LED blink interval time. */
static blt_int16u ledBlinkIntervalMs;
/************************************************************************************//**
** \brief Initializes the LED blink driver.
** \param interval_ms Specifies the desired LED blink interval time in milliseconds.
** \return none.
**
****************************************************************************************/
void LedBlinkInit(blt_int16u interval_ms)
{
/* store the interval time between LED toggles */
ledBlinkIntervalMs = interval_ms;
} /*** end of LedBlinkInit ***/
/************************************************************************************//**
** \brief Task function for blinking the LED as a fixed timer interval.
** \return none.
**
****************************************************************************************/
void LedBlinkTask(void)
{
static blt_bool ledOn = BLT_FALSE;
static blt_int32u nextBlinkEvent = 0;
/* check for blink event */
if (TimerGet() >= nextBlinkEvent)
{
/* toggle the LED state */
if (ledOn == BLT_FALSE)
{
ledOn = BLT_TRUE;
LL_GPIO_SetOutputPin(GPIOB, LL_GPIO_PIN_7);
}
else
{
ledOn = BLT_FALSE;
LL_GPIO_ResetOutputPin(GPIOB, LL_GPIO_PIN_7);
}
/* schedule the next blink event */
nextBlinkEvent = TimerGet() + ledBlinkIntervalMs;
}
} /*** end of LedBlinkTask ***/
/************************************************************************************//**
** \brief Cleans up the LED blink driver. This is intended to be used upon program
** exit.
** \return none.
**
****************************************************************************************/
void LedBlinkExit(void)
{
/* turn the LED off */
LL_GPIO_ResetOutputPin(GPIOB, LL_GPIO_PIN_7);
} /*** end of LedBlinkExit ***/
/*********************************** end of led.c **************************************/

40
Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/App/led.h
Unescape View File

@ -0,0 +1,40 @@
/************************************************************************************//**
* \file Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/App/led.h
* \brief LED driver header file.
* \ingroup Boot_ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE
* \internal
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2020 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
#ifndef LED_H
#define LED_H
/****************************************************************************************
* Function prototypes
****************************************************************************************/
void LedBlinkInit(blt_int16u interval_ms);
void LedBlinkTask(void);
void LedBlinkExit(void);
#endif /* LED_H */
/*********************************** end of led.h **************************************/

73
Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/Boot Debug.launch
Unescape View File

@ -0,0 +1,73 @@
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<launchConfiguration type="com.st.stm32cube.ide.mcu.debug.launch.launchConfigurationType">
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.access_port_id" value="0"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.enable_live_expr" value="true"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.enable_swv" value="false"/>
<intAttribute key="com.st.stm32cube.ide.mcu.debug.launch.formatVersion" value="2"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.ip_address_local" value="localhost"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.loadList" value="{&quot;fItems&quot;:[{&quot;fIsFromMainTab&quot;:true,&quot;fPath&quot;:&quot;Debug/openblt_stm32f746.elf&quot;,&quot;fProjectName&quot;:&quot;Boot&quot;,&quot;fPerformBuild&quot;:true,&quot;fDownload&quot;:true,&quot;fLoadSymbols&quot;:true}]}"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.override_start_address_mode" value="default"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.remoteCommand" value="target remote"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.startServer" value="true"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.startuptab.exception.divby0" value="true"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.startuptab.exception.unaligned" value="false"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.startuptab.haltonexception" value="true"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swd_mode" value="true"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swv_port" value="61235"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swv_trace_div" value="8"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swv_trace_hclk" value="16000000"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.useRemoteTarget" value="true"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.vector_table" value=""/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.verify_flash_download" value="true"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.cti_allow_halt" value="false"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.cti_signal_halt" value="false"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_external_loader" value="false"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_logging" value="false"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_max_halt_delay" value="false"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_shared_stlink" value="false"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.external_loader" value=""/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.external_loader_init" value="false"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.frequency" value="0"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.halt_all_on_reset" value="false"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.log_file" value="C:\Work\software\OpenBLT\Target\Demo\ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE\Boot\Debug\st-link_gdbserver_log.txt"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.low_power_debug" value="enable"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.max_halt_delay" value="2"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.reset_strategy" value="connect_under_reset"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.stlink_check_serial_number" value="false"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.stlink_txt_serial_number" value=""/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.watchdog_config" value="none"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlinkrestart_configurations" value="{&quot;fItems&quot;:[{&quot;fDisplayName&quot;:&quot;Reset&quot;,&quot;fIsSuppressible&quot;:false,&quot;fResetAttribute&quot;:&quot;Reset&quot;,&quot;fResetStrategies&quot;:[{&quot;fDisplayName&quot;:&quot;Reset&quot;,&quot;fLaunchAttribute&quot;:&quot;monitor reset&quot;,&quot;fGdbCommands&quot;:[&quot;monitor reset&quot;],&quot;fCmdOptions&quot;:[]},{&quot;fDisplayName&quot;:&quot;None&quot;,&quot;fLaunchAttribute&quot;:&quot;no_reset&quot;,&quot;fGdbCommands&quot;:[],&quot;fCmdOptions&quot;:[]}],&quot;fGdbCommandGroup&quot;:{&quot;name&quot;:&quot;Additional commands&quot;,&quot;commands&quot;:[]}}]}"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.swv.swv_wait_for_sync" value="true"/>
<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="false"/>
<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="false"/>
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value=""/>
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="ST-LINK (ST-LINK GDB server)"/>
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="61234"/>
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
<booleanAttribute key="org.eclipse.cdt.dsf.gdb.NON_STOP" value="true"/>
<booleanAttribute key="org.eclipse.cdt.dsf.gdb.UPDATE_THREADLIST_ON_SUSPEND" value="false"/>
<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_START_MODE" value="remote"/>
<booleanAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN" value="true"/>
<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN_SYMBOL" value="main"/>
<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="Debug/openblt_stm32f746.elf"/>
<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="Boot"/>
<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.463937141"/>
<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
<listEntry value="/Boot"/>
</listAttribute>
<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
<listEntry value="4"/>
</listAttribute>
<stringAttribute key="org.eclipse.dsf.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList context=&quot;reserved-for-future-use&quot;/&gt;&#13;&#10;"/>
<stringAttribute key="process_factory_id" value="org.eclipse.cdt.dsf.gdb.GdbProcessFactory"/>
</launchConfiguration>

201
Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/Boot.ioc
Unescape View File

@ -0,0 +1,201 @@
#MicroXplorer Configuration settings - do not modify
CAN1.BS1=CAN_BS1_4TQ
CAN1.CalculateTimeQuantum=296.2962962962963
CAN1.IPParameters=CalculateTimeQuantum,BS1
File.Version=6
KeepUserPlacement=false
Mcu.Family=STM32F7
Mcu.IP0=CAN1
Mcu.IP1=CORTEX_M7
Mcu.IP2=NVIC
Mcu.IP3=RCC
Mcu.IP4=SYS
Mcu.IP5=USART3
Mcu.IP6=USB_OTG_FS
Mcu.IPNb=7
Mcu.Name=STM32F746ZGTx
Mcu.Package=LQFP144
Mcu.Pin0=PC13
Mcu.Pin1=PH0/OSC_IN
Mcu.Pin10=VP_SYS_VS_Systick
Mcu.Pin2=PH1/OSC_OUT
Mcu.Pin3=PD8
Mcu.Pin4=PD9
Mcu.Pin5=PA11
Mcu.Pin6=PA12
Mcu.Pin7=PB7
Mcu.Pin8=PB8
Mcu.Pin9=PB9
Mcu.PinsNb=11
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32F746ZGTx
MxCube.Version=6.0.1
MxDb.Version=DB.6.0.0
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.ForceEnableDMAVector=true
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:true\:false
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true\:true
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
PA11.GPIOParameters=GPIO_Label
PA11.GPIO_Label=USB_DM
PA11.Locked=true
PA11.Mode=Device_Only
PA11.Signal=USB_OTG_FS_DM
PA12.GPIOParameters=GPIO_Label
PA12.GPIO_Label=USB_DP
PA12.Locked=true
PA12.Mode=Device_Only
PA12.Signal=USB_OTG_FS_DP
PB7.Locked=true
PB7.Signal=GPIO_Output
PB8.Locked=true
PB8.Mode=Master
PB8.Signal=CAN1_RX
PB9.Locked=true