© COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MISC_H
+#define __MISC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup MISC
+ * @{
+ */
+
+/** @defgroup MISC_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief NVIC Init Structure definition
+ */
+
+typedef struct
+{
+ uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled.
+ This parameter can be a value of @ref IRQn_Type
+ (For the complete STM32 Devices IRQ Channels list, please
+ refer to stm32f10x.h file) */
+
+ uint8_t NVIC_IRQChannelPreemptionPriority; /*!< Specifies the pre-emption priority for the IRQ channel
+ specified in NVIC_IRQChannel. This parameter can be a value
+ between 0 and 15 as described in the table @ref NVIC_Priority_Table */
+
+ uint8_t NVIC_IRQChannelSubPriority; /*!< Specifies the subpriority level for the IRQ channel specified
+ in NVIC_IRQChannel. This parameter can be a value
+ between 0 and 15 as described in the table @ref NVIC_Priority_Table */
+
+ FunctionalState NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel
+ will be enabled or disabled.
+ This parameter can be set either to ENABLE or DISABLE */
+} NVIC_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup NVIC_Priority_Table
+ * @{
+ */
+
+/**
+@code
+ The table below gives the allowed values of the pre-emption priority and subpriority according
+ to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function
+ ============================================================================================================================
+ NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description
+ ============================================================================================================================
+ NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority
+ | | | 4 bits for subpriority
+ ----------------------------------------------------------------------------------------------------------------------------
+ NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority
+ | | | 3 bits for subpriority
+ ----------------------------------------------------------------------------------------------------------------------------
+ NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority
+ | | | 2 bits for subpriority
+ ----------------------------------------------------------------------------------------------------------------------------
+ NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority
+ | | | 1 bits for subpriority
+ ----------------------------------------------------------------------------------------------------------------------------
+ NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority
+ | | | 0 bits for subpriority
+ ============================================================================================================================
+@endcode
+*/
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup Vector_Table_Base
+ * @{
+ */
+
+#define NVIC_VectTab_RAM ((uint32_t)0x20000000)
+#define NVIC_VectTab_FLASH ((uint32_t)0x08000000)
+#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \
+ ((VECTTAB) == NVIC_VectTab_FLASH))
+/**
+ * @}
+ */
+
+/** @defgroup System_Low_Power
+ * @{
+ */
+
+#define NVIC_LP_SEVONPEND ((uint8_t)0x10)
+#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04)
+#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02)
+#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \
+ ((LP) == NVIC_LP_SLEEPDEEP) || \
+ ((LP) == NVIC_LP_SLEEPONEXIT))
+/**
+ * @}
+ */
+
+/** @defgroup Preemption_Priority_Group
+ * @{
+ */
+
+#define NVIC_PriorityGroup_0 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority
+ 4 bits for subpriority */
+#define NVIC_PriorityGroup_1 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority
+ 3 bits for subpriority */
+#define NVIC_PriorityGroup_2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority
+ 2 bits for subpriority */
+#define NVIC_PriorityGroup_3 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority
+ 1 bits for subpriority */
+#define NVIC_PriorityGroup_4 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority
+ 0 bits for subpriority */
+
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \
+ ((GROUP) == NVIC_PriorityGroup_1) || \
+ ((GROUP) == NVIC_PriorityGroup_2) || \
+ ((GROUP) == NVIC_PriorityGroup_3) || \
+ ((GROUP) == NVIC_PriorityGroup_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
+
+#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x000FFFFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup SysTick_clock_source
+ * @{
+ */
+
+#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB)
+#define SysTick_CLKSource_HCLK ((uint32_t)0x00000004)
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \
+ ((SOURCE) == SysTick_CLKSource_HCLK_Div8))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Exported_Functions
+ * @{
+ */
+
+void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup);
+void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct);
+void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset);
+void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState);
+void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MISC_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_adc.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_adc.h
new file mode 100644
index 00000000..d1b2653a
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_adc.h
@@ -0,0 +1,483 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_adc.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the ADC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_ADC_H
+#define __STM32F10x_ADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup ADC
+ * @{
+ */
+
+/** @defgroup ADC_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief ADC Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t ADC_Mode; /*!< Configures the ADC to operate in independent or
+ dual mode.
+ This parameter can be a value of @ref ADC_mode */
+
+ FunctionalState ADC_ScanConvMode; /*!< Specifies whether the conversion is performed in
+ Scan (multichannels) or Single (one channel) mode.
+ This parameter can be set to ENABLE or DISABLE */
+
+ FunctionalState ADC_ContinuousConvMode; /*!< Specifies whether the conversion is performed in
+ Continuous or Single mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t ADC_ExternalTrigConv; /*!< Defines the external trigger used to start the analog
+ to digital conversion of regular channels. This parameter
+ can be a value of @ref ADC_external_trigger_sources_for_regular_channels_conversion */
+
+ uint32_t ADC_DataAlign; /*!< Specifies whether the ADC data alignment is left or right.
+ This parameter can be a value of @ref ADC_data_align */
+
+ uint8_t ADC_NbrOfChannel; /*!< Specifies the number of ADC channels that will be converted
+ using the sequencer for regular channel group.
+ This parameter must range from 1 to 16. */
+}ADC_InitTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Exported_Constants
+ * @{
+ */
+
+#define IS_ADC_ALL_PERIPH(PERIPH) (((PERIPH) == ADC1) || \
+ ((PERIPH) == ADC2) || \
+ ((PERIPH) == ADC3))
+
+#define IS_ADC_DMA_PERIPH(PERIPH) (((PERIPH) == ADC1) || \
+ ((PERIPH) == ADC3))
+
+/** @defgroup ADC_mode
+ * @{
+ */
+
+#define ADC_Mode_Independent ((uint32_t)0x00000000)
+#define ADC_Mode_RegInjecSimult ((uint32_t)0x00010000)
+#define ADC_Mode_RegSimult_AlterTrig ((uint32_t)0x00020000)
+#define ADC_Mode_InjecSimult_FastInterl ((uint32_t)0x00030000)
+#define ADC_Mode_InjecSimult_SlowInterl ((uint32_t)0x00040000)
+#define ADC_Mode_InjecSimult ((uint32_t)0x00050000)
+#define ADC_Mode_RegSimult ((uint32_t)0x00060000)
+#define ADC_Mode_FastInterl ((uint32_t)0x00070000)
+#define ADC_Mode_SlowInterl ((uint32_t)0x00080000)
+#define ADC_Mode_AlterTrig ((uint32_t)0x00090000)
+
+#define IS_ADC_MODE(MODE) (((MODE) == ADC_Mode_Independent) || \
+ ((MODE) == ADC_Mode_RegInjecSimult) || \
+ ((MODE) == ADC_Mode_RegSimult_AlterTrig) || \
+ ((MODE) == ADC_Mode_InjecSimult_FastInterl) || \
+ ((MODE) == ADC_Mode_InjecSimult_SlowInterl) || \
+ ((MODE) == ADC_Mode_InjecSimult) || \
+ ((MODE) == ADC_Mode_RegSimult) || \
+ ((MODE) == ADC_Mode_FastInterl) || \
+ ((MODE) == ADC_Mode_SlowInterl) || \
+ ((MODE) == ADC_Mode_AlterTrig))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_external_trigger_sources_for_regular_channels_conversion
+ * @{
+ */
+
+#define ADC_ExternalTrigConv_T1_CC1 ((uint32_t)0x00000000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T1_CC2 ((uint32_t)0x00020000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T2_CC2 ((uint32_t)0x00060000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T3_TRGO ((uint32_t)0x00080000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T4_CC4 ((uint32_t)0x000A0000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO ((uint32_t)0x000C0000) /*!< For ADC1 and ADC2 */
+
+#define ADC_ExternalTrigConv_T1_CC3 ((uint32_t)0x00040000) /*!< For ADC1, ADC2 and ADC3 */
+#define ADC_ExternalTrigConv_None ((uint32_t)0x000E0000) /*!< For ADC1, ADC2 and ADC3 */
+
+#define ADC_ExternalTrigConv_T3_CC1 ((uint32_t)0x00000000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T2_CC3 ((uint32_t)0x00020000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T8_CC1 ((uint32_t)0x00060000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T8_TRGO ((uint32_t)0x00080000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T5_CC1 ((uint32_t)0x000A0000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T5_CC3 ((uint32_t)0x000C0000) /*!< For ADC3 only */
+
+#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_ExternalTrigConv_T1_CC1) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T1_CC2) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T1_CC3) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T2_CC2) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T3_TRGO) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T4_CC4) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_None) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T3_CC1) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T2_CC3) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T8_CC1) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T8_TRGO) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T5_CC1) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T5_CC3))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_data_align
+ * @{
+ */
+
+#define ADC_DataAlign_Right ((uint32_t)0x00000000)
+#define ADC_DataAlign_Left ((uint32_t)0x00000800)
+#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DataAlign_Right) || \
+ ((ALIGN) == ADC_DataAlign_Left))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_channels
+ * @{
+ */
+
+#define ADC_Channel_0 ((uint8_t)0x00)
+#define ADC_Channel_1 ((uint8_t)0x01)
+#define ADC_Channel_2 ((uint8_t)0x02)
+#define ADC_Channel_3 ((uint8_t)0x03)
+#define ADC_Channel_4 ((uint8_t)0x04)
+#define ADC_Channel_5 ((uint8_t)0x05)
+#define ADC_Channel_6 ((uint8_t)0x06)
+#define ADC_Channel_7 ((uint8_t)0x07)
+#define ADC_Channel_8 ((uint8_t)0x08)
+#define ADC_Channel_9 ((uint8_t)0x09)
+#define ADC_Channel_10 ((uint8_t)0x0A)
+#define ADC_Channel_11 ((uint8_t)0x0B)
+#define ADC_Channel_12 ((uint8_t)0x0C)
+#define ADC_Channel_13 ((uint8_t)0x0D)
+#define ADC_Channel_14 ((uint8_t)0x0E)
+#define ADC_Channel_15 ((uint8_t)0x0F)
+#define ADC_Channel_16 ((uint8_t)0x10)
+#define ADC_Channel_17 ((uint8_t)0x11)
+
+#define ADC_Channel_TempSensor ((uint8_t)ADC_Channel_16)
+#define ADC_Channel_Vrefint ((uint8_t)ADC_Channel_17)
+
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_Channel_0) || ((CHANNEL) == ADC_Channel_1) || \
+ ((CHANNEL) == ADC_Channel_2) || ((CHANNEL) == ADC_Channel_3) || \
+ ((CHANNEL) == ADC_Channel_4) || ((CHANNEL) == ADC_Channel_5) || \
+ ((CHANNEL) == ADC_Channel_6) || ((CHANNEL) == ADC_Channel_7) || \
+ ((CHANNEL) == ADC_Channel_8) || ((CHANNEL) == ADC_Channel_9) || \
+ ((CHANNEL) == ADC_Channel_10) || ((CHANNEL) == ADC_Channel_11) || \
+ ((CHANNEL) == ADC_Channel_12) || ((CHANNEL) == ADC_Channel_13) || \
+ ((CHANNEL) == ADC_Channel_14) || ((CHANNEL) == ADC_Channel_15) || \
+ ((CHANNEL) == ADC_Channel_16) || ((CHANNEL) == ADC_Channel_17))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_sampling_time
+ * @{
+ */
+
+#define ADC_SampleTime_1Cycles5 ((uint8_t)0x00)
+#define ADC_SampleTime_7Cycles5 ((uint8_t)0x01)
+#define ADC_SampleTime_13Cycles5 ((uint8_t)0x02)
+#define ADC_SampleTime_28Cycles5 ((uint8_t)0x03)
+#define ADC_SampleTime_41Cycles5 ((uint8_t)0x04)
+#define ADC_SampleTime_55Cycles5 ((uint8_t)0x05)
+#define ADC_SampleTime_71Cycles5 ((uint8_t)0x06)
+#define ADC_SampleTime_239Cycles5 ((uint8_t)0x07)
+#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SampleTime_1Cycles5) || \
+ ((TIME) == ADC_SampleTime_7Cycles5) || \
+ ((TIME) == ADC_SampleTime_13Cycles5) || \
+ ((TIME) == ADC_SampleTime_28Cycles5) || \
+ ((TIME) == ADC_SampleTime_41Cycles5) || \
+ ((TIME) == ADC_SampleTime_55Cycles5) || \
+ ((TIME) == ADC_SampleTime_71Cycles5) || \
+ ((TIME) == ADC_SampleTime_239Cycles5))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_external_trigger_sources_for_injected_channels_conversion
+ * @{
+ */
+
+#define ADC_ExternalTrigInjecConv_T2_TRGO ((uint32_t)0x00002000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_T2_CC1 ((uint32_t)0x00003000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_T3_CC4 ((uint32_t)0x00004000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_T4_TRGO ((uint32_t)0x00005000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4 ((uint32_t)0x00006000) /*!< For ADC1 and ADC2 */
+
+#define ADC_ExternalTrigInjecConv_T1_TRGO ((uint32_t)0x00000000) /*!< For ADC1, ADC2 and ADC3 */
+#define ADC_ExternalTrigInjecConv_T1_CC4 ((uint32_t)0x00001000) /*!< For ADC1, ADC2 and ADC3 */
+#define ADC_ExternalTrigInjecConv_None ((uint32_t)0x00007000) /*!< For ADC1, ADC2 and ADC3 */
+
+#define ADC_ExternalTrigInjecConv_T4_CC3 ((uint32_t)0x00002000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T8_CC2 ((uint32_t)0x00003000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T8_CC4 ((uint32_t)0x00004000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T5_TRGO ((uint32_t)0x00005000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T5_CC4 ((uint32_t)0x00006000) /*!< For ADC3 only */
+
+#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_ExternalTrigInjecConv_T1_TRGO) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T1_CC4) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_TRGO) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_CC1) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC4) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_TRGO) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_None) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC3) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC2) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC4) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_TRGO) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_CC4))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_injected_channel_selection
+ * @{
+ */
+
+#define ADC_InjectedChannel_1 ((uint8_t)0x14)
+#define ADC_InjectedChannel_2 ((uint8_t)0x18)
+#define ADC_InjectedChannel_3 ((uint8_t)0x1C)
+#define ADC_InjectedChannel_4 ((uint8_t)0x20)
+#define IS_ADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) == ADC_InjectedChannel_1) || \
+ ((CHANNEL) == ADC_InjectedChannel_2) || \
+ ((CHANNEL) == ADC_InjectedChannel_3) || \
+ ((CHANNEL) == ADC_InjectedChannel_4))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_analog_watchdog_selection
+ * @{
+ */
+
+#define ADC_AnalogWatchdog_SingleRegEnable ((uint32_t)0x00800200)
+#define ADC_AnalogWatchdog_SingleInjecEnable ((uint32_t)0x00400200)
+#define ADC_AnalogWatchdog_SingleRegOrInjecEnable ((uint32_t)0x00C00200)
+#define ADC_AnalogWatchdog_AllRegEnable ((uint32_t)0x00800000)
+#define ADC_AnalogWatchdog_AllInjecEnable ((uint32_t)0x00400000)
+#define ADC_AnalogWatchdog_AllRegAllInjecEnable ((uint32_t)0x00C00000)
+#define ADC_AnalogWatchdog_None ((uint32_t)0x00000000)
+
+#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_AnalogWatchdog_SingleRegEnable) || \
+ ((WATCHDOG) == ADC_AnalogWatchdog_SingleInjecEnable) || \
+ ((WATCHDOG) == ADC_AnalogWatchdog_SingleRegOrInjecEnable) || \
+ ((WATCHDOG) == ADC_AnalogWatchdog_AllRegEnable) || \
+ ((WATCHDOG) == ADC_AnalogWatchdog_AllInjecEnable) || \
+ ((WATCHDOG) == ADC_AnalogWatchdog_AllRegAllInjecEnable) || \
+ ((WATCHDOG) == ADC_AnalogWatchdog_None))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_interrupts_definition
+ * @{
+ */
+
+#define ADC_IT_EOC ((uint16_t)0x0220)
+#define ADC_IT_AWD ((uint16_t)0x0140)
+#define ADC_IT_JEOC ((uint16_t)0x0480)
+
+#define IS_ADC_IT(IT) ((((IT) & (uint16_t)0xF81F) == 0x00) && ((IT) != 0x00))
+
+#define IS_ADC_GET_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD) || \
+ ((IT) == ADC_IT_JEOC))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_flags_definition
+ * @{
+ */
+
+#define ADC_FLAG_AWD ((uint8_t)0x01)
+#define ADC_FLAG_EOC ((uint8_t)0x02)
+#define ADC_FLAG_JEOC ((uint8_t)0x04)
+#define ADC_FLAG_JSTRT ((uint8_t)0x08)
+#define ADC_FLAG_STRT ((uint8_t)0x10)
+#define IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint8_t)0xE0) == 0x00) && ((FLAG) != 0x00))
+#define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || ((FLAG) == ADC_FLAG_EOC) || \
+ ((FLAG) == ADC_FLAG_JEOC) || ((FLAG)== ADC_FLAG_JSTRT) || \
+ ((FLAG) == ADC_FLAG_STRT))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_thresholds
+ * @{
+ */
+
+#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_injected_offset
+ * @{
+ */
+
+#define IS_ADC_OFFSET(OFFSET) ((OFFSET) <= 0xFFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_injected_length
+ * @{
+ */
+
+#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x4))
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_injected_rank
+ * @{
+ */
+
+#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x4))
+
+/**
+ * @}
+ */
+
+
+/** @defgroup ADC_regular_length
+ * @{
+ */
+
+#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x10))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_rank
+ * @{
+ */
+
+#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x10))
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_discontinuous_mode_number
+ * @{
+ */
+
+#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 0x1) && ((NUMBER) <= 0x8))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Exported_Functions
+ * @{
+ */
+
+void ADC_DeInit(ADC_TypeDef* ADCx);
+void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct);
+void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct);
+void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState);
+void ADC_ResetCalibration(ADC_TypeDef* ADCx);
+FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx);
+void ADC_StartCalibration(ADC_TypeDef* ADCx);
+FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx);
+void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx);
+void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number);
+void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime);
+void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx);
+uint32_t ADC_GetDualModeConversionValue(void);
+void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv);
+void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx);
+void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime);
+void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length);
+void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset);
+uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel);
+void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog);
+void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold, uint16_t LowThreshold);
+void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel);
+void ADC_TempSensorVrefintCmd(FunctionalState NewState);
+FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG);
+void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG);
+ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT);
+void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_ADC_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_bkp.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_bkp.h
new file mode 100644
index 00000000..b620753e
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_bkp.h
@@ -0,0 +1,195 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_bkp.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the BKP firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_BKP_H
+#define __STM32F10x_BKP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup BKP
+ * @{
+ */
+
+/** @defgroup BKP_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Exported_Constants
+ * @{
+ */
+
+/** @defgroup Tamper_Pin_active_level
+ * @{
+ */
+
+#define BKP_TamperPinLevel_High ((uint16_t)0x0000)
+#define BKP_TamperPinLevel_Low ((uint16_t)0x0001)
+#define IS_BKP_TAMPER_PIN_LEVEL(LEVEL) (((LEVEL) == BKP_TamperPinLevel_High) || \
+ ((LEVEL) == BKP_TamperPinLevel_Low))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_output_source_to_output_on_the_Tamper_pin
+ * @{
+ */
+
+#define BKP_RTCOutputSource_None ((uint16_t)0x0000)
+#define BKP_RTCOutputSource_CalibClock ((uint16_t)0x0080)
+#define BKP_RTCOutputSource_Alarm ((uint16_t)0x0100)
+#define BKP_RTCOutputSource_Second ((uint16_t)0x0300)
+#define IS_BKP_RTC_OUTPUT_SOURCE(SOURCE) (((SOURCE) == BKP_RTCOutputSource_None) || \
+ ((SOURCE) == BKP_RTCOutputSource_CalibClock) || \
+ ((SOURCE) == BKP_RTCOutputSource_Alarm) || \
+ ((SOURCE) == BKP_RTCOutputSource_Second))
+/**
+ * @}
+ */
+
+/** @defgroup Data_Backup_Register
+ * @{
+ */
+
+#define BKP_DR1 ((uint16_t)0x0004)
+#define BKP_DR2 ((uint16_t)0x0008)
+#define BKP_DR3 ((uint16_t)0x000C)
+#define BKP_DR4 ((uint16_t)0x0010)
+#define BKP_DR5 ((uint16_t)0x0014)
+#define BKP_DR6 ((uint16_t)0x0018)
+#define BKP_DR7 ((uint16_t)0x001C)
+#define BKP_DR8 ((uint16_t)0x0020)
+#define BKP_DR9 ((uint16_t)0x0024)
+#define BKP_DR10 ((uint16_t)0x0028)
+#define BKP_DR11 ((uint16_t)0x0040)
+#define BKP_DR12 ((uint16_t)0x0044)
+#define BKP_DR13 ((uint16_t)0x0048)
+#define BKP_DR14 ((uint16_t)0x004C)
+#define BKP_DR15 ((uint16_t)0x0050)
+#define BKP_DR16 ((uint16_t)0x0054)
+#define BKP_DR17 ((uint16_t)0x0058)
+#define BKP_DR18 ((uint16_t)0x005C)
+#define BKP_DR19 ((uint16_t)0x0060)
+#define BKP_DR20 ((uint16_t)0x0064)
+#define BKP_DR21 ((uint16_t)0x0068)
+#define BKP_DR22 ((uint16_t)0x006C)
+#define BKP_DR23 ((uint16_t)0x0070)
+#define BKP_DR24 ((uint16_t)0x0074)
+#define BKP_DR25 ((uint16_t)0x0078)
+#define BKP_DR26 ((uint16_t)0x007C)
+#define BKP_DR27 ((uint16_t)0x0080)
+#define BKP_DR28 ((uint16_t)0x0084)
+#define BKP_DR29 ((uint16_t)0x0088)
+#define BKP_DR30 ((uint16_t)0x008C)
+#define BKP_DR31 ((uint16_t)0x0090)
+#define BKP_DR32 ((uint16_t)0x0094)
+#define BKP_DR33 ((uint16_t)0x0098)
+#define BKP_DR34 ((uint16_t)0x009C)
+#define BKP_DR35 ((uint16_t)0x00A0)
+#define BKP_DR36 ((uint16_t)0x00A4)
+#define BKP_DR37 ((uint16_t)0x00A8)
+#define BKP_DR38 ((uint16_t)0x00AC)
+#define BKP_DR39 ((uint16_t)0x00B0)
+#define BKP_DR40 ((uint16_t)0x00B4)
+#define BKP_DR41 ((uint16_t)0x00B8)
+#define BKP_DR42 ((uint16_t)0x00BC)
+
+#define IS_BKP_DR(DR) (((DR) == BKP_DR1) || ((DR) == BKP_DR2) || ((DR) == BKP_DR3) || \
+ ((DR) == BKP_DR4) || ((DR) == BKP_DR5) || ((DR) == BKP_DR6) || \
+ ((DR) == BKP_DR7) || ((DR) == BKP_DR8) || ((DR) == BKP_DR9) || \
+ ((DR) == BKP_DR10) || ((DR) == BKP_DR11) || ((DR) == BKP_DR12) || \
+ ((DR) == BKP_DR13) || ((DR) == BKP_DR14) || ((DR) == BKP_DR15) || \
+ ((DR) == BKP_DR16) || ((DR) == BKP_DR17) || ((DR) == BKP_DR18) || \
+ ((DR) == BKP_DR19) || ((DR) == BKP_DR20) || ((DR) == BKP_DR21) || \
+ ((DR) == BKP_DR22) || ((DR) == BKP_DR23) || ((DR) == BKP_DR24) || \
+ ((DR) == BKP_DR25) || ((DR) == BKP_DR26) || ((DR) == BKP_DR27) || \
+ ((DR) == BKP_DR28) || ((DR) == BKP_DR29) || ((DR) == BKP_DR30) || \
+ ((DR) == BKP_DR31) || ((DR) == BKP_DR32) || ((DR) == BKP_DR33) || \
+ ((DR) == BKP_DR34) || ((DR) == BKP_DR35) || ((DR) == BKP_DR36) || \
+ ((DR) == BKP_DR37) || ((DR) == BKP_DR38) || ((DR) == BKP_DR39) || \
+ ((DR) == BKP_DR40) || ((DR) == BKP_DR41) || ((DR) == BKP_DR42))
+
+#define IS_BKP_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x7F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Exported_Functions
+ * @{
+ */
+
+void BKP_DeInit(void);
+void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel);
+void BKP_TamperPinCmd(FunctionalState NewState);
+void BKP_ITConfig(FunctionalState NewState);
+void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource);
+void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue);
+void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data);
+uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR);
+FlagStatus BKP_GetFlagStatus(void);
+void BKP_ClearFlag(void);
+ITStatus BKP_GetITStatus(void);
+void BKP_ClearITPendingBit(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_BKP_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_can.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_can.h
new file mode 100644
index 00000000..648f747c
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_can.h
@@ -0,0 +1,697 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_can.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the CAN firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CAN_H
+#define __STM32F10x_CAN_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup CAN
+ * @{
+ */
+
+/** @defgroup CAN_Exported_Types
+ * @{
+ */
+
+#define IS_CAN_ALL_PERIPH(PERIPH) (((PERIPH) == CAN1) || \
+ ((PERIPH) == CAN2))
+
+/**
+ * @brief CAN init structure definition
+ */
+
+typedef struct
+{
+ uint16_t CAN_Prescaler; /*!< Specifies the length of a time quantum.
+ It ranges from 1 to 1024. */
+
+ uint8_t CAN_Mode; /*!< Specifies the CAN operating mode.
+ This parameter can be a value of
+ @ref CAN_operating_mode */
+
+ uint8_t CAN_SJW; /*!< Specifies the maximum number of time quanta
+ the CAN hardware is allowed to lengthen or
+ shorten a bit to perform resynchronization.
+ This parameter can be a value of
+ @ref CAN_synchronisation_jump_width */
+
+ uint8_t CAN_BS1; /*!< Specifies the number of time quanta in Bit
+ Segment 1. This parameter can be a value of
+ @ref CAN_time_quantum_in_bit_segment_1 */
+
+ uint8_t CAN_BS2; /*!< Specifies the number of time quanta in Bit
+ Segment 2.
+ This parameter can be a value of
+ @ref CAN_time_quantum_in_bit_segment_2 */
+
+ FunctionalState CAN_TTCM; /*!< Enable or disable the time triggered
+ communication mode. This parameter can be set
+ either to ENABLE or DISABLE. */
+
+ FunctionalState CAN_ABOM; /*!< Enable or disable the automatic bus-off
+ management. This parameter can be set either
+ to ENABLE or DISABLE. */
+
+ FunctionalState CAN_AWUM; /*!< Enable or disable the automatic wake-up mode.
+ This parameter can be set either to ENABLE or
+ DISABLE. */
+
+ FunctionalState CAN_NART; /*!< Enable or disable the no-automatic
+ retransmission mode. This parameter can be
+ set either to ENABLE or DISABLE. */
+
+ FunctionalState CAN_RFLM; /*!< Enable or disable the Receive FIFO Locked mode.
+ This parameter can be set either to ENABLE
+ or DISABLE. */
+
+ FunctionalState CAN_TXFP; /*!< Enable or disable the transmit FIFO priority.
+ This parameter can be set either to ENABLE
+ or DISABLE. */
+} CAN_InitTypeDef;
+
+/**
+ * @brief CAN filter init structure definition
+ */
+
+typedef struct
+{
+ uint16_t CAN_FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
+ configuration, first one for a 16-bit configuration).
+ This parameter can be a value between 0x0000 and 0xFFFF */
+
+ uint16_t CAN_FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
+ configuration, second one for a 16-bit configuration).
+ This parameter can be a value between 0x0000 and 0xFFFF */
+
+ uint16_t CAN_FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
+ according to the mode (MSBs for a 32-bit configuration,
+ first one for a 16-bit configuration).
+ This parameter can be a value between 0x0000 and 0xFFFF */
+
+ uint16_t CAN_FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
+ according to the mode (LSBs for a 32-bit configuration,
+ second one for a 16-bit configuration).
+ This parameter can be a value between 0x0000 and 0xFFFF */
+
+ uint16_t CAN_FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
+ This parameter can be a value of @ref CAN_filter_FIFO */
+
+ uint8_t CAN_FilterNumber; /*!< Specifies the filter which will be initialized. It ranges from 0 to 13. */
+
+ uint8_t CAN_FilterMode; /*!< Specifies the filter mode to be initialized.
+ This parameter can be a value of @ref CAN_filter_mode */
+
+ uint8_t CAN_FilterScale; /*!< Specifies the filter scale.
+ This parameter can be a value of @ref CAN_filter_scale */
+
+ FunctionalState CAN_FilterActivation; /*!< Enable or disable the filter.
+ This parameter can be set either to ENABLE or DISABLE. */
+} CAN_FilterInitTypeDef;
+
+/**
+ * @brief CAN Tx message structure definition
+ */
+
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter can be a value between 0 to 0x7FF. */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter can be a value between 0 to 0x1FFFFFFF. */
+
+ uint8_t IDE; /*!< Specifies the type of identifier for the message that
+ will be transmitted. This parameter can be a value
+ of @ref CAN_identifier_type */
+
+ uint8_t RTR; /*!< Specifies the type of frame for the message that will
+ be transmitted. This parameter can be a value of
+ @ref CAN_remote_transmission_request */
+
+ uint8_t DLC; /*!< Specifies the length of the frame that will be
+ transmitted. This parameter can be a value between
+ 0 to 8 */
+
+ uint8_t Data[8]; /*!< Contains the data to be transmitted. It ranges from 0
+ to 0xFF. */
+} CanTxMsg;
+
+/**
+ * @brief CAN Rx message structure definition
+ */
+
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter can be a value between 0 to 0x7FF. */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter can be a value between 0 to 0x1FFFFFFF. */
+
+ uint8_t IDE; /*!< Specifies the type of identifier for the message that
+ will be received. This parameter can be a value of
+ @ref CAN_identifier_type */
+
+ uint8_t RTR; /*!< Specifies the type of frame for the received message.
+ This parameter can be a value of
+ @ref CAN_remote_transmission_request */
+
+ uint8_t DLC; /*!< Specifies the length of the frame that will be received.
+ This parameter can be a value between 0 to 8 */
+
+ uint8_t Data[8]; /*!< Contains the data to be received. It ranges from 0 to
+ 0xFF. */
+
+ uint8_t FMI; /*!< Specifies the index of the filter the message stored in
+ the mailbox passes through. This parameter can be a
+ value between 0 to 0xFF */
+} CanRxMsg;
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Exported_Constants
+ * @{
+ */
+
+/** @defgroup CAN_sleep_constants
+ * @{
+ */
+
+#define CAN_InitStatus_Failed ((uint8_t)0x00) /*!< CAN initialization failed */
+#define CAN_InitStatus_Success ((uint8_t)0x01) /*!< CAN initialization OK */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Mode
+ * @{
+ */
+
+#define CAN_Mode_Normal ((uint8_t)0x00) /*!< normal mode */
+#define CAN_Mode_LoopBack ((uint8_t)0x01) /*!< loopback mode */
+#define CAN_Mode_Silent ((uint8_t)0x02) /*!< silent mode */
+#define CAN_Mode_Silent_LoopBack ((uint8_t)0x03) /*!< loopback combined with silent mode */
+
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || \
+ ((MODE) == CAN_Mode_LoopBack)|| \
+ ((MODE) == CAN_Mode_Silent) || \
+ ((MODE) == CAN_Mode_Silent_LoopBack))
+/**
+ * @}
+ */
+
+
+/**
+ * @defgroup CAN_Operating_Mode
+ * @{
+ */
+#define CAN_OperatingMode_Initialization ((uint8_t)0x00) /*!< Initialization mode */
+#define CAN_OperatingMode_Normal ((uint8_t)0x01) /*!< Normal mode */
+#define CAN_OperatingMode_Sleep ((uint8_t)0x02) /*!< sleep mode */
+
+
+#define IS_CAN_OPERATING_MODE(MODE) (((MODE) == CAN_OperatingMode_Initialization) ||\
+ ((MODE) == CAN_OperatingMode_Normal)|| \
+ ((MODE) == CAN_OperatingMode_Sleep))
+/**
+ * @}
+ */
+
+/**
+ * @defgroup CAN_Mode_Status
+ * @{
+ */
+
+#define CAN_ModeStatus_Failed ((uint8_t)0x00) /*!< CAN entering the specific mode failed */
+#define CAN_ModeStatus_Success ((uint8_t)!CAN_ModeStatus_Failed) /*!< CAN entering the specific mode Succeed */
+
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_synchronisation_jump_width
+ * @{
+ */
+
+#define CAN_SJW_1tq ((uint8_t)0x00) /*!< 1 time quantum */
+#define CAN_SJW_2tq ((uint8_t)0x01) /*!< 2 time quantum */
+#define CAN_SJW_3tq ((uint8_t)0x02) /*!< 3 time quantum */
+#define CAN_SJW_4tq ((uint8_t)0x03) /*!< 4 time quantum */
+
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \
+ ((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1
+ * @{
+ */
+
+#define CAN_BS1_1tq ((uint8_t)0x00) /*!< 1 time quantum */
+#define CAN_BS1_2tq ((uint8_t)0x01) /*!< 2 time quantum */
+#define CAN_BS1_3tq ((uint8_t)0x02) /*!< 3 time quantum */
+#define CAN_BS1_4tq ((uint8_t)0x03) /*!< 4 time quantum */
+#define CAN_BS1_5tq ((uint8_t)0x04) /*!< 5 time quantum */
+#define CAN_BS1_6tq ((uint8_t)0x05) /*!< 6 time quantum */
+#define CAN_BS1_7tq ((uint8_t)0x06) /*!< 7 time quantum */
+#define CAN_BS1_8tq ((uint8_t)0x07) /*!< 8 time quantum */
+#define CAN_BS1_9tq ((uint8_t)0x08) /*!< 9 time quantum */
+#define CAN_BS1_10tq ((uint8_t)0x09) /*!< 10 time quantum */
+#define CAN_BS1_11tq ((uint8_t)0x0A) /*!< 11 time quantum */
+#define CAN_BS1_12tq ((uint8_t)0x0B) /*!< 12 time quantum */
+#define CAN_BS1_13tq ((uint8_t)0x0C) /*!< 13 time quantum */
+#define CAN_BS1_14tq ((uint8_t)0x0D) /*!< 14 time quantum */
+#define CAN_BS1_15tq ((uint8_t)0x0E) /*!< 15 time quantum */
+#define CAN_BS1_16tq ((uint8_t)0x0F) /*!< 16 time quantum */
+
+#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2
+ * @{
+ */
+
+#define CAN_BS2_1tq ((uint8_t)0x00) /*!< 1 time quantum */
+#define CAN_BS2_2tq ((uint8_t)0x01) /*!< 2 time quantum */
+#define CAN_BS2_3tq ((uint8_t)0x02) /*!< 3 time quantum */
+#define CAN_BS2_4tq ((uint8_t)0x03) /*!< 4 time quantum */
+#define CAN_BS2_5tq ((uint8_t)0x04) /*!< 5 time quantum */
+#define CAN_BS2_6tq ((uint8_t)0x05) /*!< 6 time quantum */
+#define CAN_BS2_7tq ((uint8_t)0x06) /*!< 7 time quantum */
+#define CAN_BS2_8tq ((uint8_t)0x07) /*!< 8 time quantum */
+
+#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq)
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_clock_prescaler
+ * @{
+ */
+
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_number
+ * @{
+ */
+#ifndef STM32F10X_CL
+ #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13)
+#else
+ #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27)
+#endif /* STM32F10X_CL */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_mode
+ * @{
+ */
+
+#define CAN_FilterMode_IdMask ((uint8_t)0x00) /*!< identifier/mask mode */
+#define CAN_FilterMode_IdList ((uint8_t)0x01) /*!< identifier list mode */
+
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \
+ ((MODE) == CAN_FilterMode_IdList))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_scale
+ * @{
+ */
+
+#define CAN_FilterScale_16bit ((uint8_t)0x00) /*!< Two 16-bit filters */
+#define CAN_FilterScale_32bit ((uint8_t)0x01) /*!< One 32-bit filter */
+
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \
+ ((SCALE) == CAN_FilterScale_32bit))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_FIFO
+ * @{
+ */
+
+#define CAN_Filter_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_Filter_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \
+ ((FIFO) == CAN_FilterFIFO1))
+/**
+ * @}
+ */
+
+/** @defgroup Start_bank_filter_for_slave_CAN
+ * @{
+ */
+#define IS_CAN_BANKNUMBER(BANKNUMBER) (((BANKNUMBER) >= 1) && ((BANKNUMBER) <= 27))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Tx
+ * @{
+ */
+
+#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
+#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF))
+#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF))
+#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_identifier_type
+ * @{
+ */
+
+#define CAN_Id_Standard ((uint32_t)0x00000000) /*!< Standard Id */
+#define CAN_Id_Extended ((uint32_t)0x00000004) /*!< Extended Id */
+#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_Id_Standard) || \
+ ((IDTYPE) == CAN_Id_Extended))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_remote_transmission_request
+ * @{
+ */
+
+#define CAN_RTR_Data ((uint32_t)0x00000000) /*!< Data frame */
+#define CAN_RTR_Remote ((uint32_t)0x00000002) /*!< Remote frame */
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_Data) || ((RTR) == CAN_RTR_Remote))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_transmit_constants
+ * @{
+ */
+
+#define CAN_TxStatus_Failed ((uint8_t)0x00)/*!< CAN transmission failed */
+#define CAN_TxStatus_Ok ((uint8_t)0x01) /*!< CAN transmission succeeded */
+#define CAN_TxStatus_Pending ((uint8_t)0x02) /*!< CAN transmission pending */
+#define CAN_TxStatus_NoMailBox ((uint8_t)0x04) /*!< CAN cell did not provide an empty mailbox */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_receive_FIFO_number_constants
+ * @{
+ */
+
+#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */
+#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */
+
+#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_sleep_constants
+ * @{
+ */
+
+#define CAN_Sleep_Failed ((uint8_t)0x00) /*!< CAN did not enter the sleep mode */
+#define CAN_Sleep_Ok ((uint8_t)0x01) /*!< CAN entered the sleep mode */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_wake_up_constants
+ * @{
+ */
+
+#define CAN_WakeUp_Failed ((uint8_t)0x00) /*!< CAN did not leave the sleep mode */
+#define CAN_WakeUp_Ok ((uint8_t)0x01) /*!< CAN leaved the sleep mode */
+
+/**
+ * @}
+ */
+
+/**
+ * @defgroup CAN_Error_Code_constants
+ * @{
+ */
+
+#define CAN_ErrorCode_NoErr ((uint8_t)0x00) /*!< No Error */
+#define CAN_ErrorCode_StuffErr ((uint8_t)0x10) /*!< Stuff Error */
+#define CAN_ErrorCode_FormErr ((uint8_t)0x20) /*!< Form Error */
+#define CAN_ErrorCode_ACKErr ((uint8_t)0x30) /*!< Acknowledgment Error */
+#define CAN_ErrorCode_BitRecessiveErr ((uint8_t)0x40) /*!< Bit Recessive Error */
+#define CAN_ErrorCode_BitDominantErr ((uint8_t)0x50) /*!< Bit Dominant Error */
+#define CAN_ErrorCode_CRCErr ((uint8_t)0x60) /*!< CRC Error */
+#define CAN_ErrorCode_SoftwareSetErr ((uint8_t)0x70) /*!< Software Set Error */
+
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_flags
+ * @{
+ */
+/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
+ and CAN_ClearFlag() functions. */
+/* If the flag is 0x1XXXXXXX, it means that it can only be used with CAN_GetFlagStatus() function. */
+
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0 ((uint32_t)0x38000001) /*!< Request MailBox0 Flag */
+#define CAN_FLAG_RQCP1 ((uint32_t)0x38000100) /*!< Request MailBox1 Flag */
+#define CAN_FLAG_RQCP2 ((uint32_t)0x38010000) /*!< Request MailBox2 Flag */
+
+/* Receive Flags */
+#define CAN_FLAG_FMP0 ((uint32_t)0x12000003) /*!< FIFO 0 Message Pending Flag */
+#define CAN_FLAG_FF0 ((uint32_t)0x32000008) /*!< FIFO 0 Full Flag */
+#define CAN_FLAG_FOV0 ((uint32_t)0x32000010) /*!< FIFO 0 Overrun Flag */
+#define CAN_FLAG_FMP1 ((uint32_t)0x14000003) /*!< FIFO 1 Message Pending Flag */
+#define CAN_FLAG_FF1 ((uint32_t)0x34000008) /*!< FIFO 1 Full Flag */
+#define CAN_FLAG_FOV1 ((uint32_t)0x34000010) /*!< FIFO 1 Overrun Flag */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_WKU ((uint32_t)0x31000008) /*!< Wake up Flag */
+#define CAN_FLAG_SLAK ((uint32_t)0x31000012) /*!< Sleep acknowledge Flag */
+/* Note: When SLAK intterupt is disabled (SLKIE=0), no polling on SLAKI is possible.
+ In this case the SLAK bit can be polled.*/
+
+/* Error Flags */
+#define CAN_FLAG_EWG ((uint32_t)0x10F00001) /*!< Error Warning Flag */
+#define CAN_FLAG_EPV ((uint32_t)0x10F00002) /*!< Error Passive Flag */
+#define CAN_FLAG_BOF ((uint32_t)0x10F00004) /*!< Bus-Off Flag */
+#define CAN_FLAG_LEC ((uint32_t)0x30F00070) /*!< Last error code Flag */
+
+#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_BOF) || \
+ ((FLAG) == CAN_FLAG_EPV) || ((FLAG) == CAN_FLAG_EWG) || \
+ ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_FOV0) || \
+ ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FMP0) || \
+ ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1) || \
+ ((FLAG) == CAN_FLAG_FMP1) || ((FLAG) == CAN_FLAG_RQCP2) || \
+ ((FLAG) == CAN_FLAG_RQCP1)|| ((FLAG) == CAN_FLAG_RQCP0) || \
+ ((FLAG) == CAN_FLAG_SLAK ))
+
+#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_RQCP2) || \
+ ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0) || \
+ ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FOV0) ||\
+ ((FLAG) == CAN_FLAG_FF1) || ((FLAG) == CAN_FLAG_FOV1) || \
+ ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_SLAK))
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_interrupts
+ * @{
+ */
+
+
+
+#define CAN_IT_TME ((uint32_t)0x00000001) /*!< Transmit mailbox empty Interrupt*/
+
+/* Receive Interrupts */
+#define CAN_IT_FMP0 ((uint32_t)0x00000002) /*!< FIFO 0 message pending Interrupt*/
+#define CAN_IT_FF0 ((uint32_t)0x00000004) /*!< FIFO 0 full Interrupt*/
+#define CAN_IT_FOV0 ((uint32_t)0x00000008) /*!< FIFO 0 overrun Interrupt*/
+#define CAN_IT_FMP1 ((uint32_t)0x00000010) /*!< FIFO 1 message pending Interrupt*/
+#define CAN_IT_FF1 ((uint32_t)0x00000020) /*!< FIFO 1 full Interrupt*/
+#define CAN_IT_FOV1 ((uint32_t)0x00000040) /*!< FIFO 1 overrun Interrupt*/
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WKU ((uint32_t)0x00010000) /*!< Wake-up Interrupt*/
+#define CAN_IT_SLK ((uint32_t)0x00020000) /*!< Sleep acknowledge Interrupt*/
+
+/* Error Interrupts */
+#define CAN_IT_EWG ((uint32_t)0x00000100) /*!< Error warning Interrupt*/
+#define CAN_IT_EPV ((uint32_t)0x00000200) /*!< Error passive Interrupt*/
+#define CAN_IT_BOF ((uint32_t)0x00000400) /*!< Bus-off Interrupt*/
+#define CAN_IT_LEC ((uint32_t)0x00000800) /*!< Last error code Interrupt*/
+#define CAN_IT_ERR ((uint32_t)0x00008000) /*!< Error Interrupt*/
+
+/* Flags named as Interrupts : kept only for FW compatibility */
+#define CAN_IT_RQCP0 CAN_IT_TME
+#define CAN_IT_RQCP1 CAN_IT_TME
+#define CAN_IT_RQCP2 CAN_IT_TME
+
+
+#define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\
+ ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\
+ ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\
+ ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\
+ ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
+ ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
+ ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
+
+#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\
+ ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\
+ ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\
+ ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
+ ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
+ ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Legacy
+ * @{
+ */
+#define CANINITFAILED CAN_InitStatus_Failed
+#define CANINITOK CAN_InitStatus_Success
+#define CAN_FilterFIFO0 CAN_Filter_FIFO0
+#define CAN_FilterFIFO1 CAN_Filter_FIFO1
+#define CAN_ID_STD CAN_Id_Standard
+#define CAN_ID_EXT CAN_Id_Extended
+#define CAN_RTR_DATA CAN_RTR_Data
+#define CAN_RTR_REMOTE CAN_RTR_Remote
+#define CANTXFAILE CAN_TxStatus_Failed
+#define CANTXOK CAN_TxStatus_Ok
+#define CANTXPENDING CAN_TxStatus_Pending
+#define CAN_NO_MB CAN_TxStatus_NoMailBox
+#define CANSLEEPFAILED CAN_Sleep_Failed
+#define CANSLEEPOK CAN_Sleep_Ok
+#define CANWAKEUPFAILED CAN_WakeUp_Failed
+#define CANWAKEUPOK CAN_WakeUp_Ok
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Exported_Functions
+ * @{
+ */
+/* Function used to set the CAN configuration to the default reset state *****/
+void CAN_DeInit(CAN_TypeDef* CANx);
+
+/* Initialization and Configuration functions *********************************/
+uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct);
+void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct);
+void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct);
+void CAN_SlaveStartBank(uint8_t CAN_BankNumber);
+void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState);
+void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState);
+
+/* Transmit functions *********************************************************/
+uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage);
+uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox);
+void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox);
+
+/* Receive functions **********************************************************/
+void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage);
+void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber);
+uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber);
+
+
+/* Operation modes functions **************************************************/
+uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode);
+uint8_t CAN_Sleep(CAN_TypeDef* CANx);
+uint8_t CAN_WakeUp(CAN_TypeDef* CANx);
+
+/* Error management functions *************************************************/
+uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx);
+uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx);
+uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx);
+
+/* Interrupts and flags management functions **********************************/
+void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState);
+FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG);
+void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG);
+ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT);
+void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_CAN_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_cec.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_cec.h
new file mode 100644
index 00000000..a3f8fc78
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_cec.h
@@ -0,0 +1,210 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_cec.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the CEC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CEC_H
+#define __STM32F10x_CEC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup CEC
+ * @{
+ */
+
+
+/** @defgroup CEC_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief CEC Init structure definition
+ */
+typedef struct
+{
+ uint16_t CEC_BitTimingMode; /*!< Configures the CEC Bit Timing Error Mode.
+ This parameter can be a value of @ref CEC_BitTiming_Mode */
+ uint16_t CEC_BitPeriodMode; /*!< Configures the CEC Bit Period Error Mode.
+ This parameter can be a value of @ref CEC_BitPeriod_Mode */
+}CEC_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup CEC_BitTiming_Mode
+ * @{
+ */
+#define CEC_BitTimingStdMode ((uint16_t)0x00) /*!< Bit timing error Standard Mode */
+#define CEC_BitTimingErrFreeMode CEC_CFGR_BTEM /*!< Bit timing error Free Mode */
+
+#define IS_CEC_BIT_TIMING_ERROR_MODE(MODE) (((MODE) == CEC_BitTimingStdMode) || \
+ ((MODE) == CEC_BitTimingErrFreeMode))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BitPeriod_Mode
+ * @{
+ */
+#define CEC_BitPeriodStdMode ((uint16_t)0x00) /*!< Bit period error Standard Mode */
+#define CEC_BitPeriodFlexibleMode CEC_CFGR_BPEM /*!< Bit period error Flexible Mode */
+
+#define IS_CEC_BIT_PERIOD_ERROR_MODE(MODE) (((MODE) == CEC_BitPeriodStdMode) || \
+ ((MODE) == CEC_BitPeriodFlexibleMode))
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_interrupts_definition
+ * @{
+ */
+#define CEC_IT_TERR CEC_CSR_TERR
+#define CEC_IT_TBTRF CEC_CSR_TBTRF
+#define CEC_IT_RERR CEC_CSR_RERR
+#define CEC_IT_RBTF CEC_CSR_RBTF
+#define IS_CEC_GET_IT(IT) (((IT) == CEC_IT_TERR) || ((IT) == CEC_IT_TBTRF) || \
+ ((IT) == CEC_IT_RERR) || ((IT) == CEC_IT_RBTF))
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_Own_Address
+ * @{
+ */
+#define IS_CEC_ADDRESS(ADDRESS) ((ADDRESS) < 0x10)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Prescaler
+ * @{
+ */
+#define IS_CEC_PRESCALER(PRESCALER) ((PRESCALER) <= 0x3FFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup CEC_flags_definition
+ * @{
+ */
+
+/**
+ * @brief ESR register flags
+ */
+#define CEC_FLAG_BTE ((uint32_t)0x10010000)
+#define CEC_FLAG_BPE ((uint32_t)0x10020000)
+#define CEC_FLAG_RBTFE ((uint32_t)0x10040000)
+#define CEC_FLAG_SBE ((uint32_t)0x10080000)
+#define CEC_FLAG_ACKE ((uint32_t)0x10100000)
+#define CEC_FLAG_LINE ((uint32_t)0x10200000)
+#define CEC_FLAG_TBTFE ((uint32_t)0x10400000)
+
+/**
+ * @brief CSR register flags
+ */
+#define CEC_FLAG_TEOM ((uint32_t)0x00000002)
+#define CEC_FLAG_TERR ((uint32_t)0x00000004)
+#define CEC_FLAG_TBTRF ((uint32_t)0x00000008)
+#define CEC_FLAG_RSOM ((uint32_t)0x00000010)
+#define CEC_FLAG_REOM ((uint32_t)0x00000020)
+#define CEC_FLAG_RERR ((uint32_t)0x00000040)
+#define CEC_FLAG_RBTF ((uint32_t)0x00000080)
+
+#define IS_CEC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFF03) == 0x00) && ((FLAG) != 0x00))
+
+#define IS_CEC_GET_FLAG(FLAG) (((FLAG) == CEC_FLAG_BTE) || ((FLAG) == CEC_FLAG_BPE) || \
+ ((FLAG) == CEC_FLAG_RBTFE) || ((FLAG)== CEC_FLAG_SBE) || \
+ ((FLAG) == CEC_FLAG_ACKE) || ((FLAG) == CEC_FLAG_LINE) || \
+ ((FLAG) == CEC_FLAG_TBTFE) || ((FLAG) == CEC_FLAG_TEOM) || \
+ ((FLAG) == CEC_FLAG_TERR) || ((FLAG) == CEC_FLAG_TBTRF) || \
+ ((FLAG) == CEC_FLAG_RSOM) || ((FLAG) == CEC_FLAG_REOM) || \
+ ((FLAG) == CEC_FLAG_RERR) || ((FLAG) == CEC_FLAG_RBTF))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Exported_Functions
+ * @{
+ */
+void CEC_DeInit(void);
+void CEC_Init(CEC_InitTypeDef* CEC_InitStruct);
+void CEC_Cmd(FunctionalState NewState);
+void CEC_ITConfig(FunctionalState NewState);
+void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress);
+void CEC_SetPrescaler(uint16_t CEC_Prescaler);
+void CEC_SendDataByte(uint8_t Data);
+uint8_t CEC_ReceiveDataByte(void);
+void CEC_StartOfMessage(void);
+void CEC_EndOfMessageCmd(FunctionalState NewState);
+FlagStatus CEC_GetFlagStatus(uint32_t CEC_FLAG);
+void CEC_ClearFlag(uint32_t CEC_FLAG);
+ITStatus CEC_GetITStatus(uint8_t CEC_IT);
+void CEC_ClearITPendingBit(uint16_t CEC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_CEC_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_crc.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_crc.h
new file mode 100644
index 00000000..658a51ce
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_crc.h
@@ -0,0 +1,94 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_crc.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the CRC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CRC_H
+#define __STM32F10x_CRC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup CRC
+ * @{
+ */
+
+/** @defgroup CRC_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Exported_Functions
+ * @{
+ */
+
+void CRC_ResetDR(void);
+uint32_t CRC_CalcCRC(uint32_t Data);
+uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength);
+uint32_t CRC_GetCRC(void);
+void CRC_SetIDRegister(uint8_t IDValue);
+uint8_t CRC_GetIDRegister(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_CRC_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_dac.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_dac.h
new file mode 100644
index 00000000..71061641
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_dac.h
@@ -0,0 +1,317 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_dac.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the DAC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_DAC_H
+#define __STM32F10x_DAC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup DAC
+ * @{
+ */
+
+/** @defgroup DAC_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief DAC Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel.
+ This parameter can be a value of @ref DAC_trigger_selection */
+
+ uint32_t DAC_WaveGeneration; /*!< Specifies whether DAC channel noise waves or triangle waves
+ are generated, or whether no wave is generated.
+ This parameter can be a value of @ref DAC_wave_generation */
+
+ uint32_t DAC_LFSRUnmask_TriangleAmplitude; /*!< Specifies the LFSR mask for noise wave generation or
+ the maximum amplitude triangle generation for the DAC channel.
+ This parameter can be a value of @ref DAC_lfsrunmask_triangleamplitude */
+
+ uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
+ This parameter can be a value of @ref DAC_output_buffer */
+}DAC_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup DAC_trigger_selection
+ * @{
+ */
+
+#define DAC_Trigger_None ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_Trigger_T6_TRGO ((uint32_t)0x00000004) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T8_TRGO ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel
+ only in High-density devices*/
+#define DAC_Trigger_T3_TRGO ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel
+ only in Connectivity line, Medium-density and Low-density Value Line devices */
+#define DAC_Trigger_T7_TRGO ((uint32_t)0x00000014) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T5_TRGO ((uint32_t)0x0000001C) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T15_TRGO ((uint32_t)0x0000001C) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel
+ only in Medium-density and Low-density Value Line devices*/
+#define DAC_Trigger_T2_TRGO ((uint32_t)0x00000024) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T4_TRGO ((uint32_t)0x0000002C) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_Ext_IT9 ((uint32_t)0x00000034) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_Software ((uint32_t)0x0000003C) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_Trigger_None) || \
+ ((TRIGGER) == DAC_Trigger_T6_TRGO) || \
+ ((TRIGGER) == DAC_Trigger_T8_TRGO) || \
+ ((TRIGGER) == DAC_Trigger_T7_TRGO) || \
+ ((TRIGGER) == DAC_Trigger_T5_TRGO) || \
+ ((TRIGGER) == DAC_Trigger_T2_TRGO) || \
+ ((TRIGGER) == DAC_Trigger_T4_TRGO) || \
+ ((TRIGGER) == DAC_Trigger_Ext_IT9) || \
+ ((TRIGGER) == DAC_Trigger_Software))
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_wave_generation
+ * @{
+ */
+
+#define DAC_WaveGeneration_None ((uint32_t)0x00000000)
+#define DAC_WaveGeneration_Noise ((uint32_t)0x00000040)
+#define DAC_WaveGeneration_Triangle ((uint32_t)0x00000080)
+#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WaveGeneration_None) || \
+ ((WAVE) == DAC_WaveGeneration_Noise) || \
+ ((WAVE) == DAC_WaveGeneration_Triangle))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_lfsrunmask_triangleamplitude
+ * @{
+ */
+
+#define DAC_LFSRUnmask_Bit0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
+#define DAC_LFSRUnmask_Bits1_0 ((uint32_t)0x00000100) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits2_0 ((uint32_t)0x00000200) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits3_0 ((uint32_t)0x00000300) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits4_0 ((uint32_t)0x00000400) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits5_0 ((uint32_t)0x00000500) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits6_0 ((uint32_t)0x00000600) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits7_0 ((uint32_t)0x00000700) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits8_0 ((uint32_t)0x00000800) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits9_0 ((uint32_t)0x00000900) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits10_0 ((uint32_t)0x00000A00) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits11_0 ((uint32_t)0x00000B00) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
+#define DAC_TriangleAmplitude_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */
+#define DAC_TriangleAmplitude_3 ((uint32_t)0x00000100) /*!< Select max triangle amplitude of 3 */
+#define DAC_TriangleAmplitude_7 ((uint32_t)0x00000200) /*!< Select max triangle amplitude of 7 */
+#define DAC_TriangleAmplitude_15 ((uint32_t)0x00000300) /*!< Select max triangle amplitude of 15 */
+#define DAC_TriangleAmplitude_31 ((uint32_t)0x00000400) /*!< Select max triangle amplitude of 31 */
+#define DAC_TriangleAmplitude_63 ((uint32_t)0x00000500) /*!< Select max triangle amplitude of 63 */
+#define DAC_TriangleAmplitude_127 ((uint32_t)0x00000600) /*!< Select max triangle amplitude of 127 */
+#define DAC_TriangleAmplitude_255 ((uint32_t)0x00000700) /*!< Select max triangle amplitude of 255 */
+#define DAC_TriangleAmplitude_511 ((uint32_t)0x00000800) /*!< Select max triangle amplitude of 511 */
+#define DAC_TriangleAmplitude_1023 ((uint32_t)0x00000900) /*!< Select max triangle amplitude of 1023 */
+#define DAC_TriangleAmplitude_2047 ((uint32_t)0x00000A00) /*!< Select max triangle amplitude of 2047 */
+#define DAC_TriangleAmplitude_4095 ((uint32_t)0x00000B00) /*!< Select max triangle amplitude of 4095 */
+
+#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUnmask_Bit0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits1_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits2_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits3_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits4_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits5_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits6_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits7_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits8_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits9_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits10_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits11_0) || \
+ ((VALUE) == DAC_TriangleAmplitude_1) || \
+ ((VALUE) == DAC_TriangleAmplitude_3) || \
+ ((VALUE) == DAC_TriangleAmplitude_7) || \
+ ((VALUE) == DAC_TriangleAmplitude_15) || \
+ ((VALUE) == DAC_TriangleAmplitude_31) || \
+ ((VALUE) == DAC_TriangleAmplitude_63) || \
+ ((VALUE) == DAC_TriangleAmplitude_127) || \
+ ((VALUE) == DAC_TriangleAmplitude_255) || \
+ ((VALUE) == DAC_TriangleAmplitude_511) || \
+ ((VALUE) == DAC_TriangleAmplitude_1023) || \
+ ((VALUE) == DAC_TriangleAmplitude_2047) || \
+ ((VALUE) == DAC_TriangleAmplitude_4095))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_output_buffer
+ * @{
+ */
+
+#define DAC_OutputBuffer_Enable ((uint32_t)0x00000000)
+#define DAC_OutputBuffer_Disable ((uint32_t)0x00000002)
+#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OutputBuffer_Enable) || \
+ ((STATE) == DAC_OutputBuffer_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Channel_selection
+ * @{
+ */
+
+#define DAC_Channel_1 ((uint32_t)0x00000000)
+#define DAC_Channel_2 ((uint32_t)0x00000010)
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_Channel_1) || \
+ ((CHANNEL) == DAC_Channel_2))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data_alignment
+ * @{
+ */
+
+#define DAC_Align_12b_R ((uint32_t)0x00000000)
+#define DAC_Align_12b_L ((uint32_t)0x00000004)
+#define DAC_Align_8b_R ((uint32_t)0x00000008)
+#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_Align_12b_R) || \
+ ((ALIGN) == DAC_Align_12b_L) || \
+ ((ALIGN) == DAC_Align_8b_R))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_wave_generation
+ * @{
+ */
+
+#define DAC_Wave_Noise ((uint32_t)0x00000040)
+#define DAC_Wave_Triangle ((uint32_t)0x00000080)
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_Wave_Noise) || \
+ ((WAVE) == DAC_Wave_Triangle))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data
+ * @{
+ */
+
+#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0)
+/**
+ * @}
+ */
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/** @defgroup DAC_interrupts_definition
+ * @{
+ */
+
+#define DAC_IT_DMAUDR ((uint32_t)0x00002000)
+#define IS_DAC_IT(IT) (((IT) == DAC_IT_DMAUDR))
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_flags_definition
+ * @{
+ */
+
+#define DAC_FLAG_DMAUDR ((uint32_t)0x00002000)
+#define IS_DAC_FLAG(FLAG) (((FLAG) == DAC_FLAG_DMAUDR))
+
+/**
+ * @}
+ */
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Exported_Functions
+ * @{
+ */
+
+void DAC_DeInit(void);
+void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct);
+void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct);
+void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState);
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState);
+#endif
+void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState);
+void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState);
+void DAC_DualSoftwareTriggerCmd(FunctionalState NewState);
+void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState);
+void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data);
+void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data);
+void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1);
+uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel);
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG);
+void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG);
+ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT);
+void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_DAC_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_dbgmcu.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_dbgmcu.h
new file mode 100644
index 00000000..1e6a68ac
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_dbgmcu.h
@@ -0,0 +1,119 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_dbgmcu.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the DBGMCU
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_DBGMCU_H
+#define __STM32F10x_DBGMCU_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup DBGMCU
+ * @{
+ */
+
+/** @defgroup DBGMCU_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Exported_Constants
+ * @{
+ */
+
+#define DBGMCU_SLEEP ((uint32_t)0x00000001)
+#define DBGMCU_STOP ((uint32_t)0x00000002)
+#define DBGMCU_STANDBY ((uint32_t)0x00000004)
+#define DBGMCU_IWDG_STOP ((uint32_t)0x00000100)
+#define DBGMCU_WWDG_STOP ((uint32_t)0x00000200)
+#define DBGMCU_TIM1_STOP ((uint32_t)0x00000400)
+#define DBGMCU_TIM2_STOP ((uint32_t)0x00000800)
+#define DBGMCU_TIM3_STOP ((uint32_t)0x00001000)
+#define DBGMCU_TIM4_STOP ((uint32_t)0x00002000)
+#define DBGMCU_CAN1_STOP ((uint32_t)0x00004000)
+#define DBGMCU_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00008000)
+#define DBGMCU_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00010000)
+#define DBGMCU_TIM8_STOP ((uint32_t)0x00020000)
+#define DBGMCU_TIM5_STOP ((uint32_t)0x00040000)
+#define DBGMCU_TIM6_STOP ((uint32_t)0x00080000)
+#define DBGMCU_TIM7_STOP ((uint32_t)0x00100000)
+#define DBGMCU_CAN2_STOP ((uint32_t)0x00200000)
+#define DBGMCU_TIM15_STOP ((uint32_t)0x00400000)
+#define DBGMCU_TIM16_STOP ((uint32_t)0x00800000)
+#define DBGMCU_TIM17_STOP ((uint32_t)0x01000000)
+#define DBGMCU_TIM12_STOP ((uint32_t)0x02000000)
+#define DBGMCU_TIM13_STOP ((uint32_t)0x04000000)
+#define DBGMCU_TIM14_STOP ((uint32_t)0x08000000)
+#define DBGMCU_TIM9_STOP ((uint32_t)0x10000000)
+#define DBGMCU_TIM10_STOP ((uint32_t)0x20000000)
+#define DBGMCU_TIM11_STOP ((uint32_t)0x40000000)
+
+#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0x800000F8) == 0x00) && ((PERIPH) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Exported_Functions
+ * @{
+ */
+
+uint32_t DBGMCU_GetREVID(void);
+uint32_t DBGMCU_GetDEVID(void);
+void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_DBGMCU_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_dma.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_dma.h
new file mode 100644
index 00000000..b5dc6a80
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_dma.h
@@ -0,0 +1,439 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_dma.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the DMA firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_DMA_H
+#define __STM32F10x_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup DMA
+ * @{
+ */
+
+/** @defgroup DMA_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief DMA Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t DMA_PeripheralBaseAddr; /*!< Specifies the peripheral base address for DMAy Channelx. */
+
+ uint32_t DMA_MemoryBaseAddr; /*!< Specifies the memory base address for DMAy Channelx. */
+
+ uint32_t DMA_DIR; /*!< Specifies if the peripheral is the source or destination.
+ This parameter can be a value of @ref DMA_data_transfer_direction */
+
+ uint32_t DMA_BufferSize; /*!< Specifies the buffer size, in data unit, of the specified Channel.
+ The data unit is equal to the configuration set in DMA_PeripheralDataSize
+ or DMA_MemoryDataSize members depending in the transfer direction. */
+
+ uint32_t DMA_PeripheralInc; /*!< Specifies whether the Peripheral address register is incremented or not.
+ This parameter can be a value of @ref DMA_peripheral_incremented_mode */
+
+ uint32_t DMA_MemoryInc; /*!< Specifies whether the memory address register is incremented or not.
+ This parameter can be a value of @ref DMA_memory_incremented_mode */
+
+ uint32_t DMA_PeripheralDataSize; /*!< Specifies the Peripheral data width.
+ This parameter can be a value of @ref DMA_peripheral_data_size */
+
+ uint32_t DMA_MemoryDataSize; /*!< Specifies the Memory data width.
+ This parameter can be a value of @ref DMA_memory_data_size */
+
+ uint32_t DMA_Mode; /*!< Specifies the operation mode of the DMAy Channelx.
+ This parameter can be a value of @ref DMA_circular_normal_mode.
+ @note: The circular buffer mode cannot be used if the memory-to-memory
+ data transfer is configured on the selected Channel */
+
+ uint32_t DMA_Priority; /*!< Specifies the software priority for the DMAy Channelx.
+ This parameter can be a value of @ref DMA_priority_level */
+
+ uint32_t DMA_M2M; /*!< Specifies if the DMAy Channelx will be used in memory-to-memory transfer.
+ This parameter can be a value of @ref DMA_memory_to_memory */
+}DMA_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Constants
+ * @{
+ */
+
+#define IS_DMA_ALL_PERIPH(PERIPH) (((PERIPH) == DMA1_Channel1) || \
+ ((PERIPH) == DMA1_Channel2) || \
+ ((PERIPH) == DMA1_Channel3) || \
+ ((PERIPH) == DMA1_Channel4) || \
+ ((PERIPH) == DMA1_Channel5) || \
+ ((PERIPH) == DMA1_Channel6) || \
+ ((PERIPH) == DMA1_Channel7) || \
+ ((PERIPH) == DMA2_Channel1) || \
+ ((PERIPH) == DMA2_Channel2) || \
+ ((PERIPH) == DMA2_Channel3) || \
+ ((PERIPH) == DMA2_Channel4) || \
+ ((PERIPH) == DMA2_Channel5))
+
+/** @defgroup DMA_data_transfer_direction
+ * @{
+ */
+
+#define DMA_DIR_PeripheralDST ((uint32_t)0x00000010)
+#define DMA_DIR_PeripheralSRC ((uint32_t)0x00000000)
+#define IS_DMA_DIR(DIR) (((DIR) == DMA_DIR_PeripheralDST) || \
+ ((DIR) == DMA_DIR_PeripheralSRC))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_peripheral_incremented_mode
+ * @{
+ */
+
+#define DMA_PeripheralInc_Enable ((uint32_t)0x00000040)
+#define DMA_PeripheralInc_Disable ((uint32_t)0x00000000)
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PeripheralInc_Enable) || \
+ ((STATE) == DMA_PeripheralInc_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_memory_incremented_mode
+ * @{
+ */
+
+#define DMA_MemoryInc_Enable ((uint32_t)0x00000080)
+#define DMA_MemoryInc_Disable ((uint32_t)0x00000000)
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MemoryInc_Enable) || \
+ ((STATE) == DMA_MemoryInc_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_peripheral_data_size
+ * @{
+ */
+
+#define DMA_PeripheralDataSize_Byte ((uint32_t)0x00000000)
+#define DMA_PeripheralDataSize_HalfWord ((uint32_t)0x00000100)
+#define DMA_PeripheralDataSize_Word ((uint32_t)0x00000200)
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PeripheralDataSize_Byte) || \
+ ((SIZE) == DMA_PeripheralDataSize_HalfWord) || \
+ ((SIZE) == DMA_PeripheralDataSize_Word))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_memory_data_size
+ * @{
+ */
+
+#define DMA_MemoryDataSize_Byte ((uint32_t)0x00000000)
+#define DMA_MemoryDataSize_HalfWord ((uint32_t)0x00000400)
+#define DMA_MemoryDataSize_Word ((uint32_t)0x00000800)
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MemoryDataSize_Byte) || \
+ ((SIZE) == DMA_MemoryDataSize_HalfWord) || \
+ ((SIZE) == DMA_MemoryDataSize_Word))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_circular_normal_mode
+ * @{
+ */
+
+#define DMA_Mode_Circular ((uint32_t)0x00000020)
+#define DMA_Mode_Normal ((uint32_t)0x00000000)
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_Mode_Circular) || ((MODE) == DMA_Mode_Normal))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_priority_level
+ * @{
+ */
+
+#define DMA_Priority_VeryHigh ((uint32_t)0x00003000)
+#define DMA_Priority_High ((uint32_t)0x00002000)
+#define DMA_Priority_Medium ((uint32_t)0x00001000)
+#define DMA_Priority_Low ((uint32_t)0x00000000)
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_Priority_VeryHigh) || \
+ ((PRIORITY) == DMA_Priority_High) || \
+ ((PRIORITY) == DMA_Priority_Medium) || \
+ ((PRIORITY) == DMA_Priority_Low))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_memory_to_memory
+ * @{
+ */
+
+#define DMA_M2M_Enable ((uint32_t)0x00004000)
+#define DMA_M2M_Disable ((uint32_t)0x00000000)
+#define IS_DMA_M2M_STATE(STATE) (((STATE) == DMA_M2M_Enable) || ((STATE) == DMA_M2M_Disable))
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_interrupts_definition
+ * @{
+ */
+
+#define DMA_IT_TC ((uint32_t)0x00000002)
+#define DMA_IT_HT ((uint32_t)0x00000004)
+#define DMA_IT_TE ((uint32_t)0x00000008)
+#define IS_DMA_CONFIG_IT(IT) ((((IT) & 0xFFFFFFF1) == 0x00) && ((IT) != 0x00))
+
+#define DMA1_IT_GL1 ((uint32_t)0x00000001)
+#define DMA1_IT_TC1 ((uint32_t)0x00000002)
+#define DMA1_IT_HT1 ((uint32_t)0x00000004)
+#define DMA1_IT_TE1 ((uint32_t)0x00000008)
+#define DMA1_IT_GL2 ((uint32_t)0x00000010)
+#define DMA1_IT_TC2 ((uint32_t)0x00000020)
+#define DMA1_IT_HT2 ((uint32_t)0x00000040)
+#define DMA1_IT_TE2 ((uint32_t)0x00000080)
+#define DMA1_IT_GL3 ((uint32_t)0x00000100)
+#define DMA1_IT_TC3 ((uint32_t)0x00000200)
+#define DMA1_IT_HT3 ((uint32_t)0x00000400)
+#define DMA1_IT_TE3 ((uint32_t)0x00000800)
+#define DMA1_IT_GL4 ((uint32_t)0x00001000)
+#define DMA1_IT_TC4 ((uint32_t)0x00002000)
+#define DMA1_IT_HT4 ((uint32_t)0x00004000)
+#define DMA1_IT_TE4 ((uint32_t)0x00008000)
+#define DMA1_IT_GL5 ((uint32_t)0x00010000)
+#define DMA1_IT_TC5 ((uint32_t)0x00020000)
+#define DMA1_IT_HT5 ((uint32_t)0x00040000)
+#define DMA1_IT_TE5 ((uint32_t)0x00080000)
+#define DMA1_IT_GL6 ((uint32_t)0x00100000)
+#define DMA1_IT_TC6 ((uint32_t)0x00200000)
+#define DMA1_IT_HT6 ((uint32_t)0x00400000)
+#define DMA1_IT_TE6 ((uint32_t)0x00800000)
+#define DMA1_IT_GL7 ((uint32_t)0x01000000)
+#define DMA1_IT_TC7 ((uint32_t)0x02000000)
+#define DMA1_IT_HT7 ((uint32_t)0x04000000)
+#define DMA1_IT_TE7 ((uint32_t)0x08000000)
+
+#define DMA2_IT_GL1 ((uint32_t)0x10000001)
+#define DMA2_IT_TC1 ((uint32_t)0x10000002)
+#define DMA2_IT_HT1 ((uint32_t)0x10000004)
+#define DMA2_IT_TE1 ((uint32_t)0x10000008)
+#define DMA2_IT_GL2 ((uint32_t)0x10000010)
+#define DMA2_IT_TC2 ((uint32_t)0x10000020)
+#define DMA2_IT_HT2 ((uint32_t)0x10000040)
+#define DMA2_IT_TE2 ((uint32_t)0x10000080)
+#define DMA2_IT_GL3 ((uint32_t)0x10000100)
+#define DMA2_IT_TC3 ((uint32_t)0x10000200)
+#define DMA2_IT_HT3 ((uint32_t)0x10000400)
+#define DMA2_IT_TE3 ((uint32_t)0x10000800)
+#define DMA2_IT_GL4 ((uint32_t)0x10001000)
+#define DMA2_IT_TC4 ((uint32_t)0x10002000)
+#define DMA2_IT_HT4 ((uint32_t)0x10004000)
+#define DMA2_IT_TE4 ((uint32_t)0x10008000)
+#define DMA2_IT_GL5 ((uint32_t)0x10010000)
+#define DMA2_IT_TC5 ((uint32_t)0x10020000)
+#define DMA2_IT_HT5 ((uint32_t)0x10040000)
+#define DMA2_IT_TE5 ((uint32_t)0x10080000)
+
+#define IS_DMA_CLEAR_IT(IT) (((((IT) & 0xF0000000) == 0x00) || (((IT) & 0xEFF00000) == 0x00)) && ((IT) != 0x00))
+
+#define IS_DMA_GET_IT(IT) (((IT) == DMA1_IT_GL1) || ((IT) == DMA1_IT_TC1) || \
+ ((IT) == DMA1_IT_HT1) || ((IT) == DMA1_IT_TE1) || \
+ ((IT) == DMA1_IT_GL2) || ((IT) == DMA1_IT_TC2) || \
+ ((IT) == DMA1_IT_HT2) || ((IT) == DMA1_IT_TE2) || \
+ ((IT) == DMA1_IT_GL3) || ((IT) == DMA1_IT_TC3) || \
+ ((IT) == DMA1_IT_HT3) || ((IT) == DMA1_IT_TE3) || \
+ ((IT) == DMA1_IT_GL4) || ((IT) == DMA1_IT_TC4) || \
+ ((IT) == DMA1_IT_HT4) || ((IT) == DMA1_IT_TE4) || \
+ ((IT) == DMA1_IT_GL5) || ((IT) == DMA1_IT_TC5) || \
+ ((IT) == DMA1_IT_HT5) || ((IT) == DMA1_IT_TE5) || \
+ ((IT) == DMA1_IT_GL6) || ((IT) == DMA1_IT_TC6) || \
+ ((IT) == DMA1_IT_HT6) || ((IT) == DMA1_IT_TE6) || \
+ ((IT) == DMA1_IT_GL7) || ((IT) == DMA1_IT_TC7) || \
+ ((IT) == DMA1_IT_HT7) || ((IT) == DMA1_IT_TE7) || \
+ ((IT) == DMA2_IT_GL1) || ((IT) == DMA2_IT_TC1) || \
+ ((IT) == DMA2_IT_HT1) || ((IT) == DMA2_IT_TE1) || \
+ ((IT) == DMA2_IT_GL2) || ((IT) == DMA2_IT_TC2) || \
+ ((IT) == DMA2_IT_HT2) || ((IT) == DMA2_IT_TE2) || \
+ ((IT) == DMA2_IT_GL3) || ((IT) == DMA2_IT_TC3) || \
+ ((IT) == DMA2_IT_HT3) || ((IT) == DMA2_IT_TE3) || \
+ ((IT) == DMA2_IT_GL4) || ((IT) == DMA2_IT_TC4) || \
+ ((IT) == DMA2_IT_HT4) || ((IT) == DMA2_IT_TE4) || \
+ ((IT) == DMA2_IT_GL5) || ((IT) == DMA2_IT_TC5) || \
+ ((IT) == DMA2_IT_HT5) || ((IT) == DMA2_IT_TE5))
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_flags_definition
+ * @{
+ */
+#define DMA1_FLAG_GL1 ((uint32_t)0x00000001)
+#define DMA1_FLAG_TC1 ((uint32_t)0x00000002)
+#define DMA1_FLAG_HT1 ((uint32_t)0x00000004)
+#define DMA1_FLAG_TE1 ((uint32_t)0x00000008)
+#define DMA1_FLAG_GL2 ((uint32_t)0x00000010)
+#define DMA1_FLAG_TC2 ((uint32_t)0x00000020)
+#define DMA1_FLAG_HT2 ((uint32_t)0x00000040)
+#define DMA1_FLAG_TE2 ((uint32_t)0x00000080)
+#define DMA1_FLAG_GL3 ((uint32_t)0x00000100)
+#define DMA1_FLAG_TC3 ((uint32_t)0x00000200)
+#define DMA1_FLAG_HT3 ((uint32_t)0x00000400)
+#define DMA1_FLAG_TE3 ((uint32_t)0x00000800)
+#define DMA1_FLAG_GL4 ((uint32_t)0x00001000)
+#define DMA1_FLAG_TC4 ((uint32_t)0x00002000)
+#define DMA1_FLAG_HT4 ((uint32_t)0x00004000)
+#define DMA1_FLAG_TE4 ((uint32_t)0x00008000)
+#define DMA1_FLAG_GL5 ((uint32_t)0x00010000)
+#define DMA1_FLAG_TC5 ((uint32_t)0x00020000)
+#define DMA1_FLAG_HT5 ((uint32_t)0x00040000)
+#define DMA1_FLAG_TE5 ((uint32_t)0x00080000)
+#define DMA1_FLAG_GL6 ((uint32_t)0x00100000)
+#define DMA1_FLAG_TC6 ((uint32_t)0x00200000)
+#define DMA1_FLAG_HT6 ((uint32_t)0x00400000)
+#define DMA1_FLAG_TE6 ((uint32_t)0x00800000)
+#define DMA1_FLAG_GL7 ((uint32_t)0x01000000)
+#define DMA1_FLAG_TC7 ((uint32_t)0x02000000)
+#define DMA1_FLAG_HT7 ((uint32_t)0x04000000)
+#define DMA1_FLAG_TE7 ((uint32_t)0x08000000)
+
+#define DMA2_FLAG_GL1 ((uint32_t)0x10000001)
+#define DMA2_FLAG_TC1 ((uint32_t)0x10000002)
+#define DMA2_FLAG_HT1 ((uint32_t)0x10000004)
+#define DMA2_FLAG_TE1 ((uint32_t)0x10000008)
+#define DMA2_FLAG_GL2 ((uint32_t)0x10000010)
+#define DMA2_FLAG_TC2 ((uint32_t)0x10000020)
+#define DMA2_FLAG_HT2 ((uint32_t)0x10000040)
+#define DMA2_FLAG_TE2 ((uint32_t)0x10000080)
+#define DMA2_FLAG_GL3 ((uint32_t)0x10000100)
+#define DMA2_FLAG_TC3 ((uint32_t)0x10000200)
+#define DMA2_FLAG_HT3 ((uint32_t)0x10000400)
+#define DMA2_FLAG_TE3 ((uint32_t)0x10000800)
+#define DMA2_FLAG_GL4 ((uint32_t)0x10001000)
+#define DMA2_FLAG_TC4 ((uint32_t)0x10002000)
+#define DMA2_FLAG_HT4 ((uint32_t)0x10004000)
+#define DMA2_FLAG_TE4 ((uint32_t)0x10008000)
+#define DMA2_FLAG_GL5 ((uint32_t)0x10010000)
+#define DMA2_FLAG_TC5 ((uint32_t)0x10020000)
+#define DMA2_FLAG_HT5 ((uint32_t)0x10040000)
+#define DMA2_FLAG_TE5 ((uint32_t)0x10080000)
+
+#define IS_DMA_CLEAR_FLAG(FLAG) (((((FLAG) & 0xF0000000) == 0x00) || (((FLAG) & 0xEFF00000) == 0x00)) && ((FLAG) != 0x00))
+
+#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA1_FLAG_GL1) || ((FLAG) == DMA1_FLAG_TC1) || \
+ ((FLAG) == DMA1_FLAG_HT1) || ((FLAG) == DMA1_FLAG_TE1) || \
+ ((FLAG) == DMA1_FLAG_GL2) || ((FLAG) == DMA1_FLAG_TC2) || \
+ ((FLAG) == DMA1_FLAG_HT2) || ((FLAG) == DMA1_FLAG_TE2) || \
+ ((FLAG) == DMA1_FLAG_GL3) || ((FLAG) == DMA1_FLAG_TC3) || \
+ ((FLAG) == DMA1_FLAG_HT3) || ((FLAG) == DMA1_FLAG_TE3) || \
+ ((FLAG) == DMA1_FLAG_GL4) || ((FLAG) == DMA1_FLAG_TC4) || \
+ ((FLAG) == DMA1_FLAG_HT4) || ((FLAG) == DMA1_FLAG_TE4) || \
+ ((FLAG) == DMA1_FLAG_GL5) || ((FLAG) == DMA1_FLAG_TC5) || \
+ ((FLAG) == DMA1_FLAG_HT5) || ((FLAG) == DMA1_FLAG_TE5) || \
+ ((FLAG) == DMA1_FLAG_GL6) || ((FLAG) == DMA1_FLAG_TC6) || \
+ ((FLAG) == DMA1_FLAG_HT6) || ((FLAG) == DMA1_FLAG_TE6) || \
+ ((FLAG) == DMA1_FLAG_GL7) || ((FLAG) == DMA1_FLAG_TC7) || \
+ ((FLAG) == DMA1_FLAG_HT7) || ((FLAG) == DMA1_FLAG_TE7) || \
+ ((FLAG) == DMA2_FLAG_GL1) || ((FLAG) == DMA2_FLAG_TC1) || \
+ ((FLAG) == DMA2_FLAG_HT1) || ((FLAG) == DMA2_FLAG_TE1) || \
+ ((FLAG) == DMA2_FLAG_GL2) || ((FLAG) == DMA2_FLAG_TC2) || \
+ ((FLAG) == DMA2_FLAG_HT2) || ((FLAG) == DMA2_FLAG_TE2) || \
+ ((FLAG) == DMA2_FLAG_GL3) || ((FLAG) == DMA2_FLAG_TC3) || \
+ ((FLAG) == DMA2_FLAG_HT3) || ((FLAG) == DMA2_FLAG_TE3) || \
+ ((FLAG) == DMA2_FLAG_GL4) || ((FLAG) == DMA2_FLAG_TC4) || \
+ ((FLAG) == DMA2_FLAG_HT4) || ((FLAG) == DMA2_FLAG_TE4) || \
+ ((FLAG) == DMA2_FLAG_GL5) || ((FLAG) == DMA2_FLAG_TC5) || \
+ ((FLAG) == DMA2_FLAG_HT5) || ((FLAG) == DMA2_FLAG_TE5))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Buffer_Size
+ * @{
+ */
+
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Functions
+ * @{
+ */
+
+void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx);
+void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct);
+void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct);
+void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState);
+void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState);
+void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber);
+uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx);
+FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG);
+void DMA_ClearFlag(uint32_t DMAy_FLAG);
+ITStatus DMA_GetITStatus(uint32_t DMAy_IT);
+void DMA_ClearITPendingBit(uint32_t DMAy_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_DMA_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_exti.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_exti.h
new file mode 100644
index 00000000..a1ab7d03
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_exti.h
@@ -0,0 +1,184 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_exti.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the EXTI firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_EXTI_H
+#define __STM32F10x_EXTI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup EXTI
+ * @{
+ */
+
+/** @defgroup EXTI_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief EXTI mode enumeration
+ */
+
+typedef enum
+{
+ EXTI_Mode_Interrupt = 0x00,
+ EXTI_Mode_Event = 0x04
+}EXTIMode_TypeDef;
+
+#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event))
+
+/**
+ * @brief EXTI Trigger enumeration
+ */
+
+typedef enum
+{
+ EXTI_Trigger_Rising = 0x08,
+ EXTI_Trigger_Falling = 0x0C,
+ EXTI_Trigger_Rising_Falling = 0x10
+}EXTITrigger_TypeDef;
+
+#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \
+ ((TRIGGER) == EXTI_Trigger_Falling) || \
+ ((TRIGGER) == EXTI_Trigger_Rising_Falling))
+/**
+ * @brief EXTI Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t EXTI_Line; /*!< Specifies the EXTI lines to be enabled or disabled.
+ This parameter can be any combination of @ref EXTI_Lines */
+
+ EXTIMode_TypeDef EXTI_Mode; /*!< Specifies the mode for the EXTI lines.
+ This parameter can be a value of @ref EXTIMode_TypeDef */
+
+ EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
+ This parameter can be a value of @ref EXTIMode_TypeDef */
+
+ FunctionalState EXTI_LineCmd; /*!< Specifies the new state of the selected EXTI lines.
+ This parameter can be set either to ENABLE or DISABLE */
+}EXTI_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Exported_Constants
+ * @{
+ */
+
+/** @defgroup EXTI_Lines
+ * @{
+ */
+
+#define EXTI_Line0 ((uint32_t)0x00001) /*!< External interrupt line 0 */
+#define EXTI_Line1 ((uint32_t)0x00002) /*!< External interrupt line 1 */
+#define EXTI_Line2 ((uint32_t)0x00004) /*!< External interrupt line 2 */
+#define EXTI_Line3 ((uint32_t)0x00008) /*!< External interrupt line 3 */
+#define EXTI_Line4 ((uint32_t)0x00010) /*!< External interrupt line 4 */
+#define EXTI_Line5 ((uint32_t)0x00020) /*!< External interrupt line 5 */
+#define EXTI_Line6 ((uint32_t)0x00040) /*!< External interrupt line 6 */
+#define EXTI_Line7 ((uint32_t)0x00080) /*!< External interrupt line 7 */
+#define EXTI_Line8 ((uint32_t)0x00100) /*!< External interrupt line 8 */
+#define EXTI_Line9 ((uint32_t)0x00200) /*!< External interrupt line 9 */
+#define EXTI_Line10 ((uint32_t)0x00400) /*!< External interrupt line 10 */
+#define EXTI_Line11 ((uint32_t)0x00800) /*!< External interrupt line 11 */
+#define EXTI_Line12 ((uint32_t)0x01000) /*!< External interrupt line 12 */
+#define EXTI_Line13 ((uint32_t)0x02000) /*!< External interrupt line 13 */
+#define EXTI_Line14 ((uint32_t)0x04000) /*!< External interrupt line 14 */
+#define EXTI_Line15 ((uint32_t)0x08000) /*!< External interrupt line 15 */
+#define EXTI_Line16 ((uint32_t)0x10000) /*!< External interrupt line 16 Connected to the PVD Output */
+#define EXTI_Line17 ((uint32_t)0x20000) /*!< External interrupt line 17 Connected to the RTC Alarm event */
+#define EXTI_Line18 ((uint32_t)0x40000) /*!< External interrupt line 18 Connected to the USB Device/USB OTG FS
+ Wakeup from suspend event */
+#define EXTI_Line19 ((uint32_t)0x80000) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
+
+#define IS_EXTI_LINE(LINE) ((((LINE) & (uint32_t)0xFFF00000) == 0x00) && ((LINE) != (uint16_t)0x00))
+#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \
+ ((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \
+ ((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \
+ ((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \
+ ((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \
+ ((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \
+ ((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \
+ ((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \
+ ((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \
+ ((LINE) == EXTI_Line18) || ((LINE) == EXTI_Line19))
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Exported_Functions
+ * @{
+ */
+
+void EXTI_DeInit(void);
+void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct);
+void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct);
+void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line);
+FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line);
+void EXTI_ClearFlag(uint32_t EXTI_Line);
+ITStatus EXTI_GetITStatus(uint32_t EXTI_Line);
+void EXTI_ClearITPendingBit(uint32_t EXTI_Line);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_EXTI_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_flash.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_flash.h
new file mode 100644
index 00000000..f46d4e87
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_flash.h
@@ -0,0 +1,426 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_flash.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the FLASH
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_FLASH_H
+#define __STM32F10x_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH
+ * @{
+ */
+
+/** @defgroup FLASH_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief FLASH Status
+ */
+
+typedef enum
+{
+ FLASH_BUSY = 1,
+ FLASH_ERROR_PG,
+ FLASH_ERROR_WRP,
+ FLASH_COMPLETE,
+ FLASH_TIMEOUT
+}FLASH_Status;
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Constants
+ * @{
+ */
+
+/** @defgroup Flash_Latency
+ * @{
+ */
+
+#define FLASH_Latency_0 ((uint32_t)0x00000000) /*!< FLASH Zero Latency cycle */
+#define FLASH_Latency_1 ((uint32_t)0x00000001) /*!< FLASH One Latency cycle */
+#define FLASH_Latency_2 ((uint32_t)0x00000002) /*!< FLASH Two Latency cycles */
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \
+ ((LATENCY) == FLASH_Latency_1) || \
+ ((LATENCY) == FLASH_Latency_2))
+/**
+ * @}
+ */
+
+/** @defgroup Half_Cycle_Enable_Disable
+ * @{
+ */
+
+#define FLASH_HalfCycleAccess_Enable ((uint32_t)0x00000008) /*!< FLASH Half Cycle Enable */
+#define FLASH_HalfCycleAccess_Disable ((uint32_t)0x00000000) /*!< FLASH Half Cycle Disable */
+#define IS_FLASH_HALFCYCLEACCESS_STATE(STATE) (((STATE) == FLASH_HalfCycleAccess_Enable) || \
+ ((STATE) == FLASH_HalfCycleAccess_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup Prefetch_Buffer_Enable_Disable
+ * @{
+ */
+
+#define FLASH_PrefetchBuffer_Enable ((uint32_t)0x00000010) /*!< FLASH Prefetch Buffer Enable */
+#define FLASH_PrefetchBuffer_Disable ((uint32_t)0x00000000) /*!< FLASH Prefetch Buffer Disable */
+#define IS_FLASH_PREFETCHBUFFER_STATE(STATE) (((STATE) == FLASH_PrefetchBuffer_Enable) || \
+ ((STATE) == FLASH_PrefetchBuffer_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup Option_Bytes_Write_Protection
+ * @{
+ */
+
+/* Values to be used with STM32 Low and Medium density devices */
+#define FLASH_WRProt_Pages0to3 ((uint32_t)0x00000001) /*!< STM32 Low and Medium density devices: Write protection of page 0 to 3 */
+#define FLASH_WRProt_Pages4to7 ((uint32_t)0x00000002) /*!< STM32 Low and Medium density devices: Write protection of page 4 to 7 */
+#define FLASH_WRProt_Pages8to11 ((uint32_t)0x00000004) /*!< STM32 Low and Medium density devices: Write protection of page 8 to 11 */
+#define FLASH_WRProt_Pages12to15 ((uint32_t)0x00000008) /*!< STM32 Low and Medium density devices: Write protection of page 12 to 15 */
+#define FLASH_WRProt_Pages16to19 ((uint32_t)0x00000010) /*!< STM32 Low and Medium density devices: Write protection of page 16 to 19 */
+#define FLASH_WRProt_Pages20to23 ((uint32_t)0x00000020) /*!< STM32 Low and Medium density devices: Write protection of page 20 to 23 */
+#define FLASH_WRProt_Pages24to27 ((uint32_t)0x00000040) /*!< STM32 Low and Medium density devices: Write protection of page 24 to 27 */
+#define FLASH_WRProt_Pages28to31 ((uint32_t)0x00000080) /*!< STM32 Low and Medium density devices: Write protection of page 28 to 31 */
+
+/* Values to be used with STM32 Medium-density devices */
+#define FLASH_WRProt_Pages32to35 ((uint32_t)0x00000100) /*!< STM32 Medium-density devices: Write protection of page 32 to 35 */
+#define FLASH_WRProt_Pages36to39 ((uint32_t)0x00000200) /*!< STM32 Medium-density devices: Write protection of page 36 to 39 */
+#define FLASH_WRProt_Pages40to43 ((uint32_t)0x00000400) /*!< STM32 Medium-density devices: Write protection of page 40 to 43 */
+#define FLASH_WRProt_Pages44to47 ((uint32_t)0x00000800) /*!< STM32 Medium-density devices: Write protection of page 44 to 47 */
+#define FLASH_WRProt_Pages48to51 ((uint32_t)0x00001000) /*!< STM32 Medium-density devices: Write protection of page 48 to 51 */
+#define FLASH_WRProt_Pages52to55 ((uint32_t)0x00002000) /*!< STM32 Medium-density devices: Write protection of page 52 to 55 */
+#define FLASH_WRProt_Pages56to59 ((uint32_t)0x00004000) /*!< STM32 Medium-density devices: Write protection of page 56 to 59 */
+#define FLASH_WRProt_Pages60to63 ((uint32_t)0x00008000) /*!< STM32 Medium-density devices: Write protection of page 60 to 63 */
+#define FLASH_WRProt_Pages64to67 ((uint32_t)0x00010000) /*!< STM32 Medium-density devices: Write protection of page 64 to 67 */
+#define FLASH_WRProt_Pages68to71 ((uint32_t)0x00020000) /*!< STM32 Medium-density devices: Write protection of page 68 to 71 */
+#define FLASH_WRProt_Pages72to75 ((uint32_t)0x00040000) /*!< STM32 Medium-density devices: Write protection of page 72 to 75 */
+#define FLASH_WRProt_Pages76to79 ((uint32_t)0x00080000) /*!< STM32 Medium-density devices: Write protection of page 76 to 79 */
+#define FLASH_WRProt_Pages80to83 ((uint32_t)0x00100000) /*!< STM32 Medium-density devices: Write protection of page 80 to 83 */
+#define FLASH_WRProt_Pages84to87 ((uint32_t)0x00200000) /*!< STM32 Medium-density devices: Write protection of page 84 to 87 */
+#define FLASH_WRProt_Pages88to91 ((uint32_t)0x00400000) /*!< STM32 Medium-density devices: Write protection of page 88 to 91 */
+#define FLASH_WRProt_Pages92to95 ((uint32_t)0x00800000) /*!< STM32 Medium-density devices: Write protection of page 92 to 95 */
+#define FLASH_WRProt_Pages96to99 ((uint32_t)0x01000000) /*!< STM32 Medium-density devices: Write protection of page 96 to 99 */
+#define FLASH_WRProt_Pages100to103 ((uint32_t)0x02000000) /*!< STM32 Medium-density devices: Write protection of page 100 to 103 */
+#define FLASH_WRProt_Pages104to107 ((uint32_t)0x04000000) /*!< STM32 Medium-density devices: Write protection of page 104 to 107 */
+#define FLASH_WRProt_Pages108to111 ((uint32_t)0x08000000) /*!< STM32 Medium-density devices: Write protection of page 108 to 111 */
+#define FLASH_WRProt_Pages112to115 ((uint32_t)0x10000000) /*!< STM32 Medium-density devices: Write protection of page 112 to 115 */
+#define FLASH_WRProt_Pages116to119 ((uint32_t)0x20000000) /*!< STM32 Medium-density devices: Write protection of page 115 to 119 */
+#define FLASH_WRProt_Pages120to123 ((uint32_t)0x40000000) /*!< STM32 Medium-density devices: Write protection of page 120 to 123 */
+#define FLASH_WRProt_Pages124to127 ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 124 to 127 */
+
+/* Values to be used with STM32 High-density and STM32F10X Connectivity line devices */
+#define FLASH_WRProt_Pages0to1 ((uint32_t)0x00000001) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 0 to 1 */
+#define FLASH_WRProt_Pages2to3 ((uint32_t)0x00000002) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 2 to 3 */
+#define FLASH_WRProt_Pages4to5 ((uint32_t)0x00000004) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 4 to 5 */
+#define FLASH_WRProt_Pages6to7 ((uint32_t)0x00000008) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 6 to 7 */
+#define FLASH_WRProt_Pages8to9 ((uint32_t)0x00000010) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 8 to 9 */
+#define FLASH_WRProt_Pages10to11 ((uint32_t)0x00000020) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 10 to 11 */
+#define FLASH_WRProt_Pages12to13 ((uint32_t)0x00000040) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 12 to 13 */
+#define FLASH_WRProt_Pages14to15 ((uint32_t)0x00000080) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 14 to 15 */
+#define FLASH_WRProt_Pages16to17 ((uint32_t)0x00000100) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 16 to 17 */
+#define FLASH_WRProt_Pages18to19 ((uint32_t)0x00000200) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 18 to 19 */
+#define FLASH_WRProt_Pages20to21 ((uint32_t)0x00000400) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 20 to 21 */
+#define FLASH_WRProt_Pages22to23 ((uint32_t)0x00000800) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 22 to 23 */
+#define FLASH_WRProt_Pages24to25 ((uint32_t)0x00001000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 24 to 25 */
+#define FLASH_WRProt_Pages26to27 ((uint32_t)0x00002000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 26 to 27 */
+#define FLASH_WRProt_Pages28to29 ((uint32_t)0x00004000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 28 to 29 */
+#define FLASH_WRProt_Pages30to31 ((uint32_t)0x00008000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 30 to 31 */
+#define FLASH_WRProt_Pages32to33 ((uint32_t)0x00010000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 32 to 33 */
+#define FLASH_WRProt_Pages34to35 ((uint32_t)0x00020000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 34 to 35 */
+#define FLASH_WRProt_Pages36to37 ((uint32_t)0x00040000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 36 to 37 */
+#define FLASH_WRProt_Pages38to39 ((uint32_t)0x00080000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 38 to 39 */
+#define FLASH_WRProt_Pages40to41 ((uint32_t)0x00100000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 40 to 41 */
+#define FLASH_WRProt_Pages42to43 ((uint32_t)0x00200000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 42 to 43 */
+#define FLASH_WRProt_Pages44to45 ((uint32_t)0x00400000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 44 to 45 */
+#define FLASH_WRProt_Pages46to47 ((uint32_t)0x00800000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 46 to 47 */
+#define FLASH_WRProt_Pages48to49 ((uint32_t)0x01000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 48 to 49 */
+#define FLASH_WRProt_Pages50to51 ((uint32_t)0x02000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 50 to 51 */
+#define FLASH_WRProt_Pages52to53 ((uint32_t)0x04000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 52 to 53 */
+#define FLASH_WRProt_Pages54to55 ((uint32_t)0x08000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 54 to 55 */
+#define FLASH_WRProt_Pages56to57 ((uint32_t)0x10000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 56 to 57 */
+#define FLASH_WRProt_Pages58to59 ((uint32_t)0x20000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 58 to 59 */
+#define FLASH_WRProt_Pages60to61 ((uint32_t)0x40000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 60 to 61 */
+#define FLASH_WRProt_Pages62to127 ((uint32_t)0x80000000) /*!< STM32 Connectivity line devices: Write protection of page 62 to 127 */
+#define FLASH_WRProt_Pages62to255 ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 62 to 255 */
+#define FLASH_WRProt_Pages62to511 ((uint32_t)0x80000000) /*!< STM32 XL-density devices: Write protection of page 62 to 511 */
+
+#define FLASH_WRProt_AllPages ((uint32_t)0xFFFFFFFF) /*!< Write protection of all Pages */
+
+#define IS_FLASH_WRPROT_PAGE(PAGE) (((PAGE) != 0x00000000))
+
+#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x080FFFFF))
+
+#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806))
+
+/**
+ * @}
+ */
+
+/** @defgroup Option_Bytes_IWatchdog
+ * @{
+ */
+
+#define OB_IWDG_SW ((uint16_t)0x0001) /*!< Software IWDG selected */
+#define OB_IWDG_HW ((uint16_t)0x0000) /*!< Hardware IWDG selected */
+#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+
+/**
+ * @}
+ */
+
+/** @defgroup Option_Bytes_nRST_STOP
+ * @{
+ */
+
+#define OB_STOP_NoRST ((uint16_t)0x0002) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STOP */
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST))
+
+/**
+ * @}
+ */
+
+/** @defgroup Option_Bytes_nRST_STDBY
+ * @{
+ */
+
+#define OB_STDBY_NoRST ((uint16_t)0x0004) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STANDBY */
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST))
+
+#ifdef STM32F10X_XL
+/**
+ * @}
+ */
+/** @defgroup FLASH_Boot
+ * @{
+ */
+#define FLASH_BOOT_Bank1 ((uint16_t)0x0000) /*!< At startup, if boot pins are set in boot from user Flash position
+ and this parameter is selected the device will boot from Bank1(Default) */
+#define FLASH_BOOT_Bank2 ((uint16_t)0x0001) /*!< At startup, if boot pins are set in boot from user Flash position
+ and this parameter is selected the device will boot from Bank 2 or Bank 1,
+ depending on the activation of the bank */
+#define IS_FLASH_BOOT(BOOT) (((BOOT) == FLASH_BOOT_Bank1) || ((BOOT) == FLASH_BOOT_Bank2))
+#endif
+/**
+ * @}
+ */
+/** @defgroup FLASH_Interrupts
+ * @{
+ */
+#ifdef STM32F10X_XL
+#define FLASH_IT_BANK2_ERROR ((uint32_t)0x80000400) /*!< FPEC BANK2 error interrupt source */
+#define FLASH_IT_BANK2_EOP ((uint32_t)0x80001000) /*!< End of FLASH BANK2 Operation Interrupt source */
+
+#define FLASH_IT_BANK1_ERROR FLASH_IT_ERROR /*!< FPEC BANK1 error interrupt source */
+#define FLASH_IT_BANK1_EOP FLASH_IT_EOP /*!< End of FLASH BANK1 Operation Interrupt source */
+
+#define FLASH_IT_ERROR ((uint32_t)0x00000400) /*!< FPEC BANK1 error interrupt source */
+#define FLASH_IT_EOP ((uint32_t)0x00001000) /*!< End of FLASH BANK1 Operation Interrupt source */
+#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0x7FFFEBFF) == 0x00000000) && (((IT) != 0x00000000)))
+#else
+#define FLASH_IT_ERROR ((uint32_t)0x00000400) /*!< FPEC error interrupt source */
+#define FLASH_IT_EOP ((uint32_t)0x00001000) /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_BANK1_ERROR FLASH_IT_ERROR /*!< FPEC BANK1 error interrupt source */
+#define FLASH_IT_BANK1_EOP FLASH_IT_EOP /*!< End of FLASH BANK1 Operation Interrupt source */
+
+#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFFFFEBFF) == 0x00000000) && (((IT) != 0x00000000)))
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Flags
+ * @{
+ */
+#ifdef STM32F10X_XL
+#define FLASH_FLAG_BANK2_BSY ((uint32_t)0x80000001) /*!< FLASH BANK2 Busy flag */
+#define FLASH_FLAG_BANK2_EOP ((uint32_t)0x80000020) /*!< FLASH BANK2 End of Operation flag */
+#define FLASH_FLAG_BANK2_PGERR ((uint32_t)0x80000004) /*!< FLASH BANK2 Program error flag */
+#define FLASH_FLAG_BANK2_WRPRTERR ((uint32_t)0x80000010) /*!< FLASH BANK2 Write protected error flag */
+
+#define FLASH_FLAG_BANK1_BSY FLASH_FLAG_BSY /*!< FLASH BANK1 Busy flag*/
+#define FLASH_FLAG_BANK1_EOP FLASH_FLAG_EOP /*!< FLASH BANK1 End of Operation flag */
+#define FLASH_FLAG_BANK1_PGERR FLASH_FLAG_PGERR /*!< FLASH BANK1 Program error flag */
+#define FLASH_FLAG_BANK1_WRPRTERR FLASH_FLAG_WRPRTERR /*!< FLASH BANK1 Write protected error flag */
+
+#define FLASH_FLAG_BSY ((uint32_t)0x00000001) /*!< FLASH Busy flag */
+#define FLASH_FLAG_EOP ((uint32_t)0x00000020) /*!< FLASH End of Operation flag */
+#define FLASH_FLAG_PGERR ((uint32_t)0x00000004) /*!< FLASH Program error flag */
+#define FLASH_FLAG_WRPRTERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_OPTERR ((uint32_t)0x00000001) /*!< FLASH Option Byte error flag */
+
+#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0x7FFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000))
+#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \
+ ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \
+ ((FLAG) == FLASH_FLAG_OPTERR)|| \
+ ((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \
+ ((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \
+ ((FLAG) == FLASH_FLAG_BANK2_BSY) || ((FLAG) == FLASH_FLAG_BANK2_EOP) || \
+ ((FLAG) == FLASH_FLAG_BANK2_PGERR) || ((FLAG) == FLASH_FLAG_BANK2_WRPRTERR))
+#else
+#define FLASH_FLAG_BSY ((uint32_t)0x00000001) /*!< FLASH Busy flag */
+#define FLASH_FLAG_EOP ((uint32_t)0x00000020) /*!< FLASH End of Operation flag */
+#define FLASH_FLAG_PGERR ((uint32_t)0x00000004) /*!< FLASH Program error flag */
+#define FLASH_FLAG_WRPRTERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_OPTERR ((uint32_t)0x00000001) /*!< FLASH Option Byte error flag */
+
+#define FLASH_FLAG_BANK1_BSY FLASH_FLAG_BSY /*!< FLASH BANK1 Busy flag*/
+#define FLASH_FLAG_BANK1_EOP FLASH_FLAG_EOP /*!< FLASH BANK1 End of Operation flag */
+#define FLASH_FLAG_BANK1_PGERR FLASH_FLAG_PGERR /*!< FLASH BANK1 Program error flag */
+#define FLASH_FLAG_BANK1_WRPRTERR FLASH_FLAG_WRPRTERR /*!< FLASH BANK1 Write protected error flag */
+
+#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000))
+#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \
+ ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \
+ ((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \
+ ((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \
+ ((FLAG) == FLASH_FLAG_OPTERR))
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Functions
+ * @{
+ */
+
+/*------------ Functions used for all STM32F10x devices -----*/
+void FLASH_SetLatency(uint32_t FLASH_Latency);
+void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess);
+void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer);
+void FLASH_Unlock(void);
+void FLASH_Lock(void);
+FLASH_Status FLASH_ErasePage(uint32_t Page_Address);
+FLASH_Status FLASH_EraseAllPages(void);
+FLASH_Status FLASH_EraseOptionBytes(void);
+FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data);
+FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data);
+FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data);
+FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages);
+FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState);
+FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY);
+uint32_t FLASH_GetUserOptionByte(void);
+uint32_t FLASH_GetWriteProtectionOptionByte(void);
+FlagStatus FLASH_GetReadOutProtectionStatus(void);
+FlagStatus FLASH_GetPrefetchBufferStatus(void);
+void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState);
+FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG);
+void FLASH_ClearFlag(uint32_t FLASH_FLAG);
+FLASH_Status FLASH_GetStatus(void);
+FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout);
+
+/*------------ New function used for all STM32F10x devices -----*/
+void FLASH_UnlockBank1(void);
+void FLASH_LockBank1(void);
+FLASH_Status FLASH_EraseAllBank1Pages(void);
+FLASH_Status FLASH_GetBank1Status(void);
+FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout);
+
+#ifdef STM32F10X_XL
+/*---- New Functions used only with STM32F10x_XL density devices -----*/
+void FLASH_UnlockBank2(void);
+void FLASH_LockBank2(void);
+FLASH_Status FLASH_EraseAllBank2Pages(void);
+FLASH_Status FLASH_GetBank2Status(void);
+FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout);
+FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_FLASH_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_fsmc.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_fsmc.h
new file mode 100644
index 00000000..ee707e74
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_fsmc.h
@@ -0,0 +1,733 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_fsmc.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the FSMC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_FSMC_H
+#define __STM32F10x_FSMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup FSMC
+ * @{
+ */
+
+/** @defgroup FSMC_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief Timing parameters For NOR/SRAM Banks
+ */
+
+typedef struct
+{
+ uint32_t FSMC_AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address setup time.
+ This parameter can be a value between 0 and 0xF.
+ @note: It is not used with synchronous NOR Flash memories. */
+
+ uint32_t FSMC_AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address hold time.
+ This parameter can be a value between 0 and 0xF.
+ @note: It is not used with synchronous NOR Flash memories.*/
+
+ uint32_t FSMC_DataSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the data setup time.
+ This parameter can be a value between 0 and 0xFF.
+ @note: It is used for SRAMs, ROMs and asynchronous multiplexed NOR Flash memories. */
+
+ uint32_t FSMC_BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
+ the duration of the bus turnaround.
+ This parameter can be a value between 0 and 0xF.
+ @note: It is only used for multiplexed NOR Flash memories. */
+
+ uint32_t FSMC_CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of HCLK cycles.
+ This parameter can be a value between 1 and 0xF.
+ @note: This parameter is not used for asynchronous NOR Flash, SRAM or ROM accesses. */
+
+ uint32_t FSMC_DataLatency; /*!< Defines the number of memory clock cycles to issue
+ to the memory before getting the first data.
+ The value of this parameter depends on the memory type as shown below:
+ - It must be set to 0 in case of a CRAM
+ - It is don't care in asynchronous NOR, SRAM or ROM accesses
+ - It may assume a value between 0 and 0xF in NOR Flash memories
+ with synchronous burst mode enable */
+
+ uint32_t FSMC_AccessMode; /*!< Specifies the asynchronous access mode.
+ This parameter can be a value of @ref FSMC_Access_Mode */
+}FSMC_NORSRAMTimingInitTypeDef;
+
+/**
+ * @brief FSMC NOR/SRAM Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t FSMC_Bank; /*!< Specifies the NOR/SRAM memory bank that will be used.
+ This parameter can be a value of @ref FSMC_NORSRAM_Bank */
+
+ uint32_t FSMC_DataAddressMux; /*!< Specifies whether the address and data values are
+ multiplexed on the databus or not.
+ This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */
+
+ uint32_t FSMC_MemoryType; /*!< Specifies the type of external memory attached to
+ the corresponding memory bank.
+ This parameter can be a value of @ref FSMC_Memory_Type */
+
+ uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be a value of @ref FSMC_Data_Width */
+
+ uint32_t FSMC_BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
+ valid only with synchronous burst Flash memories.
+ This parameter can be a value of @ref FSMC_Burst_Access_Mode */
+
+ uint32_t FSMC_AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
+ valid only with asynchronous Flash memories.
+ This parameter can be a value of @ref FSMC_AsynchronousWait */
+
+ uint32_t FSMC_WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
+ the Flash memory in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */
+
+ uint32_t FSMC_WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
+ memory, valid only when accessing Flash memories in burst mode.
+ This parameter can be a value of @ref FSMC_Wrap_Mode */
+
+ uint32_t FSMC_WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
+ clock cycle before the wait state or during the wait state,
+ valid only when accessing memories in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Timing */
+
+ uint32_t FSMC_WriteOperation; /*!< Enables or disables the write operation in the selected bank by the FSMC.
+ This parameter can be a value of @ref FSMC_Write_Operation */
+
+ uint32_t FSMC_WaitSignal; /*!< Enables or disables the wait-state insertion via wait
+ signal, valid for Flash memory access in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Signal */
+
+ uint32_t FSMC_ExtendedMode; /*!< Enables or disables the extended mode.
+ This parameter can be a value of @ref FSMC_Extended_Mode */
+
+ uint32_t FSMC_WriteBurst; /*!< Enables or disables the write burst operation.
+ This parameter can be a value of @ref FSMC_Write_Burst */
+
+ FSMC_NORSRAMTimingInitTypeDef* FSMC_ReadWriteTimingStruct; /*!< Timing Parameters for write and read access if the ExtendedMode is not used*/
+
+ FSMC_NORSRAMTimingInitTypeDef* FSMC_WriteTimingStruct; /*!< Timing Parameters for write access if the ExtendedMode is used*/
+}FSMC_NORSRAMInitTypeDef;
+
+/**
+ * @brief Timing parameters For FSMC NAND and PCCARD Banks
+ */
+
+typedef struct
+{
+ uint32_t FSMC_SetupTime; /*!< Defines the number of HCLK cycles to setup address before
+ the command assertion for NAND-Flash read or write access
+ to common/Attribute or I/O memory space (depending on
+ the memory space timing to be configured).
+ This parameter can be a value between 0 and 0xFF.*/
+
+ uint32_t FSMC_WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
+ command for NAND-Flash read or write access to
+ common/Attribute or I/O memory space (depending on the
+ memory space timing to be configured).
+ This parameter can be a number between 0x00 and 0xFF */
+
+ uint32_t FSMC_HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
+ (and data for write access) after the command deassertion
+ for NAND-Flash read or write access to common/Attribute
+ or I/O memory space (depending on the memory space timing
+ to be configured).
+ This parameter can be a number between 0x00 and 0xFF */
+
+ uint32_t FSMC_HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
+ databus is kept in HiZ after the start of a NAND-Flash
+ write access to common/Attribute or I/O memory space (depending
+ on the memory space timing to be configured).
+ This parameter can be a number between 0x00 and 0xFF */
+}FSMC_NAND_PCCARDTimingInitTypeDef;
+
+/**
+ * @brief FSMC NAND Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t FSMC_Bank; /*!< Specifies the NAND memory bank that will be used.
+ This parameter can be a value of @ref FSMC_NAND_Bank */
+
+ uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory Bank.
+ This parameter can be any value of @ref FSMC_Wait_feature */
+
+ uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be any value of @ref FSMC_Data_Width */
+
+ uint32_t FSMC_ECC; /*!< Enables or disables the ECC computation.
+ This parameter can be any value of @ref FSMC_ECC */
+
+ uint32_t FSMC_ECCPageSize; /*!< Defines the page size for the extended ECC.
+ This parameter can be any value of @ref FSMC_ECC_Page_Size */
+
+ uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between 0 and 0xFF. */
+
+ uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between 0x0 and 0xFF */
+
+ FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */
+
+ FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */
+}FSMC_NANDInitTypeDef;
+
+/**
+ * @brief FSMC PCCARD Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the Memory Bank.
+ This parameter can be any value of @ref FSMC_Wait_feature */
+
+ uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between 0 and 0xFF. */
+
+ uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between 0x0 and 0xFF */
+
+
+ FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */
+
+ FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */
+
+ FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_IOSpaceTimingStruct; /*!< FSMC IO Space Timing */
+}FSMC_PCCARDInitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup FSMC_NORSRAM_Bank
+ * @{
+ */
+#define FSMC_Bank1_NORSRAM1 ((uint32_t)0x00000000)
+#define FSMC_Bank1_NORSRAM2 ((uint32_t)0x00000002)
+#define FSMC_Bank1_NORSRAM3 ((uint32_t)0x00000004)
+#define FSMC_Bank1_NORSRAM4 ((uint32_t)0x00000006)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NAND_Bank
+ * @{
+ */
+#define FSMC_Bank2_NAND ((uint32_t)0x00000010)
+#define FSMC_Bank3_NAND ((uint32_t)0x00000100)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_PCCARD_Bank
+ * @{
+ */
+#define FSMC_Bank4_PCCARD ((uint32_t)0x00001000)
+/**
+ * @}
+ */
+
+#define IS_FSMC_NORSRAM_BANK(BANK) (((BANK) == FSMC_Bank1_NORSRAM1) || \
+ ((BANK) == FSMC_Bank1_NORSRAM2) || \
+ ((BANK) == FSMC_Bank1_NORSRAM3) || \
+ ((BANK) == FSMC_Bank1_NORSRAM4))
+
+#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
+ ((BANK) == FSMC_Bank3_NAND))
+
+#define IS_FSMC_GETFLAG_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
+ ((BANK) == FSMC_Bank3_NAND) || \
+ ((BANK) == FSMC_Bank4_PCCARD))
+
+#define IS_FSMC_IT_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
+ ((BANK) == FSMC_Bank3_NAND) || \
+ ((BANK) == FSMC_Bank4_PCCARD))
+
+/** @defgroup NOR_SRAM_Controller
+ * @{
+ */
+
+/** @defgroup FSMC_Data_Address_Bus_Multiplexing
+ * @{
+ */
+
+#define FSMC_DataAddressMux_Disable ((uint32_t)0x00000000)
+#define FSMC_DataAddressMux_Enable ((uint32_t)0x00000002)
+#define IS_FSMC_MUX(MUX) (((MUX) == FSMC_DataAddressMux_Disable) || \
+ ((MUX) == FSMC_DataAddressMux_Enable))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Memory_Type
+ * @{
+ */
+
+#define FSMC_MemoryType_SRAM ((uint32_t)0x00000000)
+#define FSMC_MemoryType_PSRAM ((uint32_t)0x00000004)
+#define FSMC_MemoryType_NOR ((uint32_t)0x00000008)
+#define IS_FSMC_MEMORY(MEMORY) (((MEMORY) == FSMC_MemoryType_SRAM) || \
+ ((MEMORY) == FSMC_MemoryType_PSRAM)|| \
+ ((MEMORY) == FSMC_MemoryType_NOR))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Data_Width
+ * @{
+ */
+
+#define FSMC_MemoryDataWidth_8b ((uint32_t)0x00000000)
+#define FSMC_MemoryDataWidth_16b ((uint32_t)0x00000010)
+#define IS_FSMC_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \
+ ((WIDTH) == FSMC_MemoryDataWidth_16b))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Burst_Access_Mode
+ * @{
+ */
+
+#define FSMC_BurstAccessMode_Disable ((uint32_t)0x00000000)
+#define FSMC_BurstAccessMode_Enable ((uint32_t)0x00000100)
+#define IS_FSMC_BURSTMODE(STATE) (((STATE) == FSMC_BurstAccessMode_Disable) || \
+ ((STATE) == FSMC_BurstAccessMode_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_AsynchronousWait
+ * @{
+ */
+#define FSMC_AsynchronousWait_Disable ((uint32_t)0x00000000)
+#define FSMC_AsynchronousWait_Enable ((uint32_t)0x00008000)
+#define IS_FSMC_ASYNWAIT(STATE) (((STATE) == FSMC_AsynchronousWait_Disable) || \
+ ((STATE) == FSMC_AsynchronousWait_Enable))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Signal_Polarity
+ * @{
+ */
+
+#define FSMC_WaitSignalPolarity_Low ((uint32_t)0x00000000)
+#define FSMC_WaitSignalPolarity_High ((uint32_t)0x00000200)
+#define IS_FSMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FSMC_WaitSignalPolarity_Low) || \
+ ((POLARITY) == FSMC_WaitSignalPolarity_High))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wrap_Mode
+ * @{
+ */
+
+#define FSMC_WrapMode_Disable ((uint32_t)0x00000000)
+#define FSMC_WrapMode_Enable ((uint32_t)0x00000400)
+#define IS_FSMC_WRAP_MODE(MODE) (((MODE) == FSMC_WrapMode_Disable) || \
+ ((MODE) == FSMC_WrapMode_Enable))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Timing
+ * @{
+ */
+
+#define FSMC_WaitSignalActive_BeforeWaitState ((uint32_t)0x00000000)
+#define FSMC_WaitSignalActive_DuringWaitState ((uint32_t)0x00000800)
+#define IS_FSMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FSMC_WaitSignalActive_BeforeWaitState) || \
+ ((ACTIVE) == FSMC_WaitSignalActive_DuringWaitState))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Write_Operation
+ * @{
+ */
+
+#define FSMC_WriteOperation_Disable ((uint32_t)0x00000000)
+#define FSMC_WriteOperation_Enable ((uint32_t)0x00001000)
+#define IS_FSMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FSMC_WriteOperation_Disable) || \
+ ((OPERATION) == FSMC_WriteOperation_Enable))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Signal
+ * @{
+ */
+
+#define FSMC_WaitSignal_Disable ((uint32_t)0x00000000)
+#define FSMC_WaitSignal_Enable ((uint32_t)0x00002000)
+#define IS_FSMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FSMC_WaitSignal_Disable) || \
+ ((SIGNAL) == FSMC_WaitSignal_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Extended_Mode
+ * @{
+ */
+
+#define FSMC_ExtendedMode_Disable ((uint32_t)0x00000000)
+#define FSMC_ExtendedMode_Enable ((uint32_t)0x00004000)
+
+#define IS_FSMC_EXTENDED_MODE(MODE) (((MODE) == FSMC_ExtendedMode_Disable) || \
+ ((MODE) == FSMC_ExtendedMode_Enable))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Write_Burst
+ * @{
+ */
+
+#define FSMC_WriteBurst_Disable ((uint32_t)0x00000000)
+#define FSMC_WriteBurst_Enable ((uint32_t)0x00080000)
+#define IS_FSMC_WRITE_BURST(BURST) (((BURST) == FSMC_WriteBurst_Disable) || \
+ ((BURST) == FSMC_WriteBurst_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Address_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 0xF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Address_Hold_Time
+ * @{
+ */
+
+#define IS_FSMC_ADDRESS_HOLD_TIME(TIME) ((TIME) <= 0xF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Data_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 0xFF))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Bus_Turn_around_Duration
+ * @{
+ */
+
+#define IS_FSMC_TURNAROUND_TIME(TIME) ((TIME) <= 0xF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_CLK_Division
+ * @{
+ */
+
+#define IS_FSMC_CLK_DIV(DIV) ((DIV) <= 0xF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Data_Latency
+ * @{
+ */
+
+#define IS_FSMC_DATA_LATENCY(LATENCY) ((LATENCY) <= 0xF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Access_Mode
+ * @{
+ */
+
+#define FSMC_AccessMode_A ((uint32_t)0x00000000)
+#define FSMC_AccessMode_B ((uint32_t)0x10000000)
+#define FSMC_AccessMode_C ((uint32_t)0x20000000)
+#define FSMC_AccessMode_D ((uint32_t)0x30000000)
+#define IS_FSMC_ACCESS_MODE(MODE) (((MODE) == FSMC_AccessMode_A) || \
+ ((MODE) == FSMC_AccessMode_B) || \
+ ((MODE) == FSMC_AccessMode_C) || \
+ ((MODE) == FSMC_AccessMode_D))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup NAND_PCCARD_Controller
+ * @{
+ */
+
+/** @defgroup FSMC_Wait_feature
+ * @{
+ */
+
+#define FSMC_Waitfeature_Disable ((uint32_t)0x00000000)
+#define FSMC_Waitfeature_Enable ((uint32_t)0x00000002)
+#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_Waitfeature_Disable) || \
+ ((FEATURE) == FSMC_Waitfeature_Enable))
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FSMC_ECC
+ * @{
+ */
+
+#define FSMC_ECC_Disable ((uint32_t)0x00000000)
+#define FSMC_ECC_Enable ((uint32_t)0x00000040)
+#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_ECC_Disable) || \
+ ((STATE) == FSMC_ECC_Enable))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_ECC_Page_Size
+ * @{
+ */
+
+#define FSMC_ECCPageSize_256Bytes ((uint32_t)0x00000000)
+#define FSMC_ECCPageSize_512Bytes ((uint32_t)0x00020000)
+#define FSMC_ECCPageSize_1024Bytes ((uint32_t)0x00040000)
+#define FSMC_ECCPageSize_2048Bytes ((uint32_t)0x00060000)
+#define FSMC_ECCPageSize_4096Bytes ((uint32_t)0x00080000)
+#define FSMC_ECCPageSize_8192Bytes ((uint32_t)0x000A0000)
+#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_ECCPageSize_256Bytes) || \
+ ((SIZE) == FSMC_ECCPageSize_512Bytes) || \
+ ((SIZE) == FSMC_ECCPageSize_1024Bytes) || \
+ ((SIZE) == FSMC_ECCPageSize_2048Bytes) || \
+ ((SIZE) == FSMC_ECCPageSize_4096Bytes) || \
+ ((SIZE) == FSMC_ECCPageSize_8192Bytes))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_TCLR_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_TAR_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Hold_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_HiZ_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Interrupt_sources
+ * @{
+ */
+
+#define FSMC_IT_RisingEdge ((uint32_t)0x00000008)
+#define FSMC_IT_Level ((uint32_t)0x00000010)
+#define FSMC_IT_FallingEdge ((uint32_t)0x00000020)
+#define IS_FSMC_IT(IT) ((((IT) & (uint32_t)0xFFFFFFC7) == 0x00000000) && ((IT) != 0x00000000))
+#define IS_FSMC_GET_IT(IT) (((IT) == FSMC_IT_RisingEdge) || \
+ ((IT) == FSMC_IT_Level) || \
+ ((IT) == FSMC_IT_FallingEdge))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Flags
+ * @{
+ */
+
+#define FSMC_FLAG_RisingEdge ((uint32_t)0x00000001)
+#define FSMC_FLAG_Level ((uint32_t)0x00000002)
+#define FSMC_FLAG_FallingEdge ((uint32_t)0x00000004)
+#define FSMC_FLAG_FEMPT ((uint32_t)0x00000040)
+#define IS_FSMC_GET_FLAG(FLAG) (((FLAG) == FSMC_FLAG_RisingEdge) || \
+ ((FLAG) == FSMC_FLAG_Level) || \
+ ((FLAG) == FSMC_FLAG_FallingEdge) || \
+ ((FLAG) == FSMC_FLAG_FEMPT))
+
+#define IS_FSMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Exported_Functions
+ * @{
+ */
+
+void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank);
+void FSMC_NANDDeInit(uint32_t FSMC_Bank);
+void FSMC_PCCARDDeInit(void);
+void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct);
+void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct);
+void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct);
+void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct);
+void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct);
+void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct);
+void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState);
+void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState);
+void FSMC_PCCARDCmd(FunctionalState NewState);
+void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState);
+uint32_t FSMC_GetECC(uint32_t FSMC_Bank);
+void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState);
+FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG);
+void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG);
+ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT);
+void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_FSMC_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_gpio.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_gpio.h
new file mode 100644
index 00000000..b8aa49a2
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_gpio.h
@@ -0,0 +1,385 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_gpio.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the GPIO
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_GPIO_H
+#define __STM32F10x_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/** @defgroup GPIO_Exported_Types
+ * @{
+ */
+
+#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \
+ ((PERIPH) == GPIOB) || \
+ ((PERIPH) == GPIOC) || \
+ ((PERIPH) == GPIOD) || \
+ ((PERIPH) == GPIOE) || \
+ ((PERIPH) == GPIOF) || \
+ ((PERIPH) == GPIOG))
+
+/**
+ * @brief Output Maximum frequency selection
+ */
+
+typedef enum
+{
+ GPIO_Speed_10MHz = 1,
+ GPIO_Speed_2MHz,
+ GPIO_Speed_50MHz
+}GPIOSpeed_TypeDef;
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_10MHz) || ((SPEED) == GPIO_Speed_2MHz) || \
+ ((SPEED) == GPIO_Speed_50MHz))
+
+/**
+ * @brief Configuration Mode enumeration
+ */
+
+typedef enum
+{ GPIO_Mode_AIN = 0x0,
+ GPIO_Mode_IN_FLOATING = 0x04,
+ GPIO_Mode_IPD = 0x28,
+ GPIO_Mode_IPU = 0x48,
+ GPIO_Mode_Out_OD = 0x14,
+ GPIO_Mode_Out_PP = 0x10,
+ GPIO_Mode_AF_OD = 0x1C,
+ GPIO_Mode_AF_PP = 0x18
+}GPIOMode_TypeDef;
+
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_AIN) || ((MODE) == GPIO_Mode_IN_FLOATING) || \
+ ((MODE) == GPIO_Mode_IPD) || ((MODE) == GPIO_Mode_IPU) || \
+ ((MODE) == GPIO_Mode_Out_OD) || ((MODE) == GPIO_Mode_Out_PP) || \
+ ((MODE) == GPIO_Mode_AF_OD) || ((MODE) == GPIO_Mode_AF_PP))
+
+/**
+ * @brief GPIO Init structure definition
+ */
+
+typedef struct
+{
+ uint16_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_pins_define */
+
+ GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIOSpeed_TypeDef */
+
+ GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIOMode_TypeDef */
+}GPIO_InitTypeDef;
+
+
+/**
+ * @brief Bit_SET and Bit_RESET enumeration
+ */
+
+typedef enum
+{ Bit_RESET = 0,
+ Bit_SET
+}BitAction;
+
+#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET))
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Exported_Constants
+ * @{
+ */
+
+/** @defgroup GPIO_pins_define
+ * @{
+ */
+
+#define GPIO_Pin_0 ((uint16_t)0x0001) /*!< Pin 0 selected */
+#define GPIO_Pin_1 ((uint16_t)0x0002) /*!< Pin 1 selected */
+#define GPIO_Pin_2 ((uint16_t)0x0004) /*!< Pin 2 selected */
+#define GPIO_Pin_3 ((uint16_t)0x0008) /*!< Pin 3 selected */
+#define GPIO_Pin_4 ((uint16_t)0x0010) /*!< Pin 4 selected */
+#define GPIO_Pin_5 ((uint16_t)0x0020) /*!< Pin 5 selected */
+#define GPIO_Pin_6 ((uint16_t)0x0040) /*!< Pin 6 selected */
+#define GPIO_Pin_7 ((uint16_t)0x0080) /*!< Pin 7 selected */
+#define GPIO_Pin_8 ((uint16_t)0x0100) /*!< Pin 8 selected */
+#define GPIO_Pin_9 ((uint16_t)0x0200) /*!< Pin 9 selected */
+#define GPIO_Pin_10 ((uint16_t)0x0400) /*!< Pin 10 selected */
+#define GPIO_Pin_11 ((uint16_t)0x0800) /*!< Pin 11 selected */
+#define GPIO_Pin_12 ((uint16_t)0x1000) /*!< Pin 12 selected */
+#define GPIO_Pin_13 ((uint16_t)0x2000) /*!< Pin 13 selected */
+#define GPIO_Pin_14 ((uint16_t)0x4000) /*!< Pin 14 selected */
+#define GPIO_Pin_15 ((uint16_t)0x8000) /*!< Pin 15 selected */
+#define GPIO_Pin_All ((uint16_t)0xFFFF) /*!< All pins selected */
+
+#define IS_GPIO_PIN(PIN) ((((PIN) & (uint16_t)0x00) == 0x00) && ((PIN) != (uint16_t)0x00))
+
+#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \
+ ((PIN) == GPIO_Pin_1) || \
+ ((PIN) == GPIO_Pin_2) || \
+ ((PIN) == GPIO_Pin_3) || \
+ ((PIN) == GPIO_Pin_4) || \
+ ((PIN) == GPIO_Pin_5) || \
+ ((PIN) == GPIO_Pin_6) || \
+ ((PIN) == GPIO_Pin_7) || \
+ ((PIN) == GPIO_Pin_8) || \
+ ((PIN) == GPIO_Pin_9) || \
+ ((PIN) == GPIO_Pin_10) || \
+ ((PIN) == GPIO_Pin_11) || \
+ ((PIN) == GPIO_Pin_12) || \
+ ((PIN) == GPIO_Pin_13) || \
+ ((PIN) == GPIO_Pin_14) || \
+ ((PIN) == GPIO_Pin_15))
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Remap_define
+ * @{
+ */
+
+#define GPIO_Remap_SPI1 ((uint32_t)0x00000001) /*!< SPI1 Alternate Function mapping */
+#define GPIO_Remap_I2C1 ((uint32_t)0x00000002) /*!< I2C1 Alternate Function mapping */
+#define GPIO_Remap_USART1 ((uint32_t)0x00000004) /*!< USART1 Alternate Function mapping */
+#define GPIO_Remap_USART2 ((uint32_t)0x00000008) /*!< USART2 Alternate Function mapping */
+#define GPIO_PartialRemap_USART3 ((uint32_t)0x00140010) /*!< USART3 Partial Alternate Function mapping */
+#define GPIO_FullRemap_USART3 ((uint32_t)0x00140030) /*!< USART3 Full Alternate Function mapping */
+#define GPIO_PartialRemap_TIM1 ((uint32_t)0x00160040) /*!< TIM1 Partial Alternate Function mapping */
+#define GPIO_FullRemap_TIM1 ((uint32_t)0x001600C0) /*!< TIM1 Full Alternate Function mapping */
+#define GPIO_PartialRemap1_TIM2 ((uint32_t)0x00180100) /*!< TIM2 Partial1 Alternate Function mapping */
+#define GPIO_PartialRemap2_TIM2 ((uint32_t)0x00180200) /*!< TIM2 Partial2 Alternate Function mapping */
+#define GPIO_FullRemap_TIM2 ((uint32_t)0x00180300) /*!< TIM2 Full Alternate Function mapping */
+#define GPIO_PartialRemap_TIM3 ((uint32_t)0x001A0800) /*!< TIM3 Partial Alternate Function mapping */
+#define GPIO_FullRemap_TIM3 ((uint32_t)0x001A0C00) /*!< TIM3 Full Alternate Function mapping */
+#define GPIO_Remap_TIM4 ((uint32_t)0x00001000) /*!< TIM4 Alternate Function mapping */
+#define GPIO_Remap1_CAN1 ((uint32_t)0x001D4000) /*!< CAN1 Alternate Function mapping */
+#define GPIO_Remap2_CAN1 ((uint32_t)0x001D6000) /*!< CAN1 Alternate Function mapping */
+#define GPIO_Remap_PD01 ((uint32_t)0x00008000) /*!< PD01 Alternate Function mapping */
+#define GPIO_Remap_TIM5CH4_LSI ((uint32_t)0x00200001) /*!< LSI connected to TIM5 Channel4 input capture for calibration */
+#define GPIO_Remap_ADC1_ETRGINJ ((uint32_t)0x00200002) /*!< ADC1 External Trigger Injected Conversion remapping */
+#define GPIO_Remap_ADC1_ETRGREG ((uint32_t)0x00200004) /*!< ADC1 External Trigger Regular Conversion remapping */
+#define GPIO_Remap_ADC2_ETRGINJ ((uint32_t)0x00200008) /*!< ADC2 External Trigger Injected Conversion remapping */
+#define GPIO_Remap_ADC2_ETRGREG ((uint32_t)0x00200010) /*!< ADC2 External Trigger Regular Conversion remapping */
+#define GPIO_Remap_ETH ((uint32_t)0x00200020) /*!< Ethernet remapping (only for Connectivity line devices) */
+#define GPIO_Remap_CAN2 ((uint32_t)0x00200040) /*!< CAN2 remapping (only for Connectivity line devices) */
+#define GPIO_Remap_SWJ_NoJTRST ((uint32_t)0x00300100) /*!< Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST */
+#define GPIO_Remap_SWJ_JTAGDisable ((uint32_t)0x00300200) /*!< JTAG-DP Disabled and SW-DP Enabled */
+#define GPIO_Remap_SWJ_Disable ((uint32_t)0x00300400) /*!< Full SWJ Disabled (JTAG-DP + SW-DP) */
+#define GPIO_Remap_SPI3 ((uint32_t)0x00201100) /*!< SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) */
+#define GPIO_Remap_TIM2ITR1_PTP_SOF ((uint32_t)0x00202000) /*!< Ethernet PTP output or USB OTG SOF (Start of Frame) connected
+ to TIM2 Internal Trigger 1 for calibration
+ (only for Connectivity line devices) */
+#define GPIO_Remap_PTP_PPS ((uint32_t)0x00204000) /*!< Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices) */
+
+#define GPIO_Remap_TIM15 ((uint32_t)0x80000001) /*!< TIM15 Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_TIM16 ((uint32_t)0x80000002) /*!< TIM16 Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_TIM17 ((uint32_t)0x80000004) /*!< TIM17 Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_CEC ((uint32_t)0x80000008) /*!< CEC Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_TIM1_DMA ((uint32_t)0x80000010) /*!< TIM1 DMA requests mapping (only for Value line devices) */
+
+#define GPIO_Remap_TIM9 ((uint32_t)0x80000020) /*!< TIM9 Alternate Function mapping (only for XL-density devices) */
+#define GPIO_Remap_TIM10 ((uint32_t)0x80000040) /*!< TIM10 Alternate Function mapping (only for XL-density devices) */
+#define GPIO_Remap_TIM11 ((uint32_t)0x80000080) /*!< TIM11 Alternate Function mapping (only for XL-density devices) */
+#define GPIO_Remap_TIM13 ((uint32_t)0x80000100) /*!< TIM13 Alternate Function mapping (only for High density Value line and XL-density devices) */
+#define GPIO_Remap_TIM14 ((uint32_t)0x80000200) /*!< TIM14 Alternate Function mapping (only for High density Value line and XL-density devices) */
+#define GPIO_Remap_FSMC_NADV ((uint32_t)0x80000400) /*!< FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices) */
+
+#define GPIO_Remap_TIM67_DAC_DMA ((uint32_t)0x80000800) /*!< TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices) */
+#define GPIO_Remap_TIM12 ((uint32_t)0x80001000) /*!< TIM12 Alternate Function mapping (only for High density Value line devices) */
+#define GPIO_Remap_MISC ((uint32_t)0x80002000) /*!< Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping,
+ only for High density Value line devices) */
+
+#define IS_GPIO_REMAP(REMAP) (((REMAP) == GPIO_Remap_SPI1) || ((REMAP) == GPIO_Remap_I2C1) || \
+ ((REMAP) == GPIO_Remap_USART1) || ((REMAP) == GPIO_Remap_USART2) || \
+ ((REMAP) == GPIO_PartialRemap_USART3) || ((REMAP) == GPIO_FullRemap_USART3) || \
+ ((REMAP) == GPIO_PartialRemap_TIM1) || ((REMAP) == GPIO_FullRemap_TIM1) || \
+ ((REMAP) == GPIO_PartialRemap1_TIM2) || ((REMAP) == GPIO_PartialRemap2_TIM2) || \
+ ((REMAP) == GPIO_FullRemap_TIM2) || ((REMAP) == GPIO_PartialRemap_TIM3) || \
+ ((REMAP) == GPIO_FullRemap_TIM3) || ((REMAP) == GPIO_Remap_TIM4) || \
+ ((REMAP) == GPIO_Remap1_CAN1) || ((REMAP) == GPIO_Remap2_CAN1) || \
+ ((REMAP) == GPIO_Remap_PD01) || ((REMAP) == GPIO_Remap_TIM5CH4_LSI) || \
+ ((REMAP) == GPIO_Remap_ADC1_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC1_ETRGREG) || \
+ ((REMAP) == GPIO_Remap_ADC2_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC2_ETRGREG) || \
+ ((REMAP) == GPIO_Remap_ETH) ||((REMAP) == GPIO_Remap_CAN2) || \
+ ((REMAP) == GPIO_Remap_SWJ_NoJTRST) || ((REMAP) == GPIO_Remap_SWJ_JTAGDisable) || \
+ ((REMAP) == GPIO_Remap_SWJ_Disable)|| ((REMAP) == GPIO_Remap_SPI3) || \
+ ((REMAP) == GPIO_Remap_TIM2ITR1_PTP_SOF) || ((REMAP) == GPIO_Remap_PTP_PPS) || \
+ ((REMAP) == GPIO_Remap_TIM15) || ((REMAP) == GPIO_Remap_TIM16) || \
+ ((REMAP) == GPIO_Remap_TIM17) || ((REMAP) == GPIO_Remap_CEC) || \
+ ((REMAP) == GPIO_Remap_TIM1_DMA) || ((REMAP) == GPIO_Remap_TIM9) || \
+ ((REMAP) == GPIO_Remap_TIM10) || ((REMAP) == GPIO_Remap_TIM11) || \
+ ((REMAP) == GPIO_Remap_TIM13) || ((REMAP) == GPIO_Remap_TIM14) || \
+ ((REMAP) == GPIO_Remap_FSMC_NADV) || ((REMAP) == GPIO_Remap_TIM67_DAC_DMA) || \
+ ((REMAP) == GPIO_Remap_TIM12) || ((REMAP) == GPIO_Remap_MISC))
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Port_Sources
+ * @{
+ */
+
+#define GPIO_PortSourceGPIOA ((uint8_t)0x00)
+#define GPIO_PortSourceGPIOB ((uint8_t)0x01)
+#define GPIO_PortSourceGPIOC ((uint8_t)0x02)
+#define GPIO_PortSourceGPIOD ((uint8_t)0x03)
+#define GPIO_PortSourceGPIOE ((uint8_t)0x04)
+#define GPIO_PortSourceGPIOF ((uint8_t)0x05)
+#define GPIO_PortSourceGPIOG ((uint8_t)0x06)
+#define IS_GPIO_EVENTOUT_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOE))
+
+#define IS_GPIO_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOE) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOF) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOG))
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Pin_sources
+ * @{
+ */
+
+#define GPIO_PinSource0 ((uint8_t)0x00)
+#define GPIO_PinSource1 ((uint8_t)0x01)
+#define GPIO_PinSource2 ((uint8_t)0x02)
+#define GPIO_PinSource3 ((uint8_t)0x03)
+#define GPIO_PinSource4 ((uint8_t)0x04)
+#define GPIO_PinSource5 ((uint8_t)0x05)
+#define GPIO_PinSource6 ((uint8_t)0x06)
+#define GPIO_PinSource7 ((uint8_t)0x07)
+#define GPIO_PinSource8 ((uint8_t)0x08)
+#define GPIO_PinSource9 ((uint8_t)0x09)
+#define GPIO_PinSource10 ((uint8_t)0x0A)
+#define GPIO_PinSource11 ((uint8_t)0x0B)
+#define GPIO_PinSource12 ((uint8_t)0x0C)
+#define GPIO_PinSource13 ((uint8_t)0x0D)
+#define GPIO_PinSource14 ((uint8_t)0x0E)
+#define GPIO_PinSource15 ((uint8_t)0x0F)
+
+#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \
+ ((PINSOURCE) == GPIO_PinSource1) || \
+ ((PINSOURCE) == GPIO_PinSource2) || \
+ ((PINSOURCE) == GPIO_PinSource3) || \
+ ((PINSOURCE) == GPIO_PinSource4) || \
+ ((PINSOURCE) == GPIO_PinSource5) || \
+ ((PINSOURCE) == GPIO_PinSource6) || \
+ ((PINSOURCE) == GPIO_PinSource7) || \
+ ((PINSOURCE) == GPIO_PinSource8) || \
+ ((PINSOURCE) == GPIO_PinSource9) || \
+ ((PINSOURCE) == GPIO_PinSource10) || \
+ ((PINSOURCE) == GPIO_PinSource11) || \
+ ((PINSOURCE) == GPIO_PinSource12) || \
+ ((PINSOURCE) == GPIO_PinSource13) || \
+ ((PINSOURCE) == GPIO_PinSource14) || \
+ ((PINSOURCE) == GPIO_PinSource15))
+
+/**
+ * @}
+ */
+
+/** @defgroup Ethernet_Media_Interface
+ * @{
+ */
+#define GPIO_ETH_MediaInterface_MII ((u32)0x00000000)
+#define GPIO_ETH_MediaInterface_RMII ((u32)0x00000001)
+
+#define IS_GPIO_ETH_MEDIA_INTERFACE(INTERFACE) (((INTERFACE) == GPIO_ETH_MediaInterface_MII) || \
+ ((INTERFACE) == GPIO_ETH_MediaInterface_RMII))
+
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Exported_Functions
+ * @{
+ */
+
+void GPIO_DeInit(GPIO_TypeDef* GPIOx);
+void GPIO_AFIODeInit(void);
+void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
+void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct);
+uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx);
+uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx);
+void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal);
+void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal);
+void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource);
+void GPIO_EventOutputCmd(FunctionalState NewState);
+void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState);
+void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource);
+void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_GPIO_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_i2c.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_i2c.h
new file mode 100644
index 00000000..2d42e5ce
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_i2c.h
@@ -0,0 +1,684 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_i2c.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the I2C firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_I2C_H
+#define __STM32F10x_I2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup I2C
+ * @{
+ */
+
+/** @defgroup I2C_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief I2C Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t I2C_ClockSpeed; /*!< Specifies the clock frequency.
+ This parameter must be set to a value lower than 400kHz */
+
+ uint16_t I2C_Mode; /*!< Specifies the I2C mode.
+ This parameter can be a value of @ref I2C_mode */
+
+ uint16_t I2C_DutyCycle; /*!< Specifies the I2C fast mode duty cycle.
+ This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */
+
+ uint16_t I2C_OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint16_t I2C_Ack; /*!< Enables or disables the acknowledgement.
+ This parameter can be a value of @ref I2C_acknowledgement */
+
+ uint16_t I2C_AcknowledgedAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged.
+ This parameter can be a value of @ref I2C_acknowledged_address */
+}I2C_InitTypeDef;
+
+/**
+ * @}
+ */
+
+
+/** @defgroup I2C_Exported_Constants
+ * @{
+ */
+
+#define IS_I2C_ALL_PERIPH(PERIPH) (((PERIPH) == I2C1) || \
+ ((PERIPH) == I2C2))
+/** @defgroup I2C_mode
+ * @{
+ */
+
+#define I2C_Mode_I2C ((uint16_t)0x0000)
+#define I2C_Mode_SMBusDevice ((uint16_t)0x0002)
+#define I2C_Mode_SMBusHost ((uint16_t)0x000A)
+#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \
+ ((MODE) == I2C_Mode_SMBusDevice) || \
+ ((MODE) == I2C_Mode_SMBusHost))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_duty_cycle_in_fast_mode
+ * @{
+ */
+
+#define I2C_DutyCycle_16_9 ((uint16_t)0x4000) /*!< I2C fast mode Tlow/Thigh = 16/9 */
+#define I2C_DutyCycle_2 ((uint16_t)0xBFFF) /*!< I2C fast mode Tlow/Thigh = 2 */
+#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DutyCycle_16_9) || \
+ ((CYCLE) == I2C_DutyCycle_2))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_acknowledgement
+ * @{
+ */
+
+#define I2C_Ack_Enable ((uint16_t)0x0400)
+#define I2C_Ack_Disable ((uint16_t)0x0000)
+#define IS_I2C_ACK_STATE(STATE) (((STATE) == I2C_Ack_Enable) || \
+ ((STATE) == I2C_Ack_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_transfer_direction
+ * @{
+ */
+
+#define I2C_Direction_Transmitter ((uint8_t)0x00)
+#define I2C_Direction_Receiver ((uint8_t)0x01)
+#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \
+ ((DIRECTION) == I2C_Direction_Receiver))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_acknowledged_address
+ * @{
+ */
+
+#define I2C_AcknowledgedAddress_7bit ((uint16_t)0x4000)
+#define I2C_AcknowledgedAddress_10bit ((uint16_t)0xC000)
+#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \
+ ((ADDRESS) == I2C_AcknowledgedAddress_10bit))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_registers
+ * @{
+ */
+
+#define I2C_Register_CR1 ((uint8_t)0x00)
+#define I2C_Register_CR2 ((uint8_t)0x04)
+#define I2C_Register_OAR1 ((uint8_t)0x08)
+#define I2C_Register_OAR2 ((uint8_t)0x0C)
+#define I2C_Register_DR ((uint8_t)0x10)
+#define I2C_Register_SR1 ((uint8_t)0x14)
+#define I2C_Register_SR2 ((uint8_t)0x18)
+#define I2C_Register_CCR ((uint8_t)0x1C)
+#define I2C_Register_TRISE ((uint8_t)0x20)
+#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \
+ ((REGISTER) == I2C_Register_CR2) || \
+ ((REGISTER) == I2C_Register_OAR1) || \
+ ((REGISTER) == I2C_Register_OAR2) || \
+ ((REGISTER) == I2C_Register_DR) || \
+ ((REGISTER) == I2C_Register_SR1) || \
+ ((REGISTER) == I2C_Register_SR2) || \
+ ((REGISTER) == I2C_Register_CCR) || \
+ ((REGISTER) == I2C_Register_TRISE))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_SMBus_alert_pin_level
+ * @{
+ */
+
+#define I2C_SMBusAlert_Low ((uint16_t)0x2000)
+#define I2C_SMBusAlert_High ((uint16_t)0xDFFF)
+#define IS_I2C_SMBUS_ALERT(ALERT) (((ALERT) == I2C_SMBusAlert_Low) || \
+ ((ALERT) == I2C_SMBusAlert_High))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_PEC_position
+ * @{
+ */
+
+#define I2C_PECPosition_Next ((uint16_t)0x0800)
+#define I2C_PECPosition_Current ((uint16_t)0xF7FF)
+#define IS_I2C_PEC_POSITION(POSITION) (((POSITION) == I2C_PECPosition_Next) || \
+ ((POSITION) == I2C_PECPosition_Current))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_NCAK_position
+ * @{
+ */
+
+#define I2C_NACKPosition_Next ((uint16_t)0x0800)
+#define I2C_NACKPosition_Current ((uint16_t)0xF7FF)
+#define IS_I2C_NACK_POSITION(POSITION) (((POSITION) == I2C_NACKPosition_Next) || \
+ ((POSITION) == I2C_NACKPosition_Current))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_interrupts_definition
+ * @{
+ */
+
+#define I2C_IT_BUF ((uint16_t)0x0400)
+#define I2C_IT_EVT ((uint16_t)0x0200)
+#define I2C_IT_ERR ((uint16_t)0x0100)
+#define IS_I2C_CONFIG_IT(IT) ((((IT) & (uint16_t)0xF8FF) == 0x00) && ((IT) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_interrupts_definition
+ * @{
+ */
+
+#define I2C_IT_SMBALERT ((uint32_t)0x01008000)
+#define I2C_IT_TIMEOUT ((uint32_t)0x01004000)
+#define I2C_IT_PECERR ((uint32_t)0x01001000)
+#define I2C_IT_OVR ((uint32_t)0x01000800)
+#define I2C_IT_AF ((uint32_t)0x01000400)
+#define I2C_IT_ARLO ((uint32_t)0x01000200)
+#define I2C_IT_BERR ((uint32_t)0x01000100)
+#define I2C_IT_TXE ((uint32_t)0x06000080)
+#define I2C_IT_RXNE ((uint32_t)0x06000040)
+#define I2C_IT_STOPF ((uint32_t)0x02000010)
+#define I2C_IT_ADD10 ((uint32_t)0x02000008)
+#define I2C_IT_BTF ((uint32_t)0x02000004)
+#define I2C_IT_ADDR ((uint32_t)0x02000002)
+#define I2C_IT_SB ((uint32_t)0x02000001)
+
+#define IS_I2C_CLEAR_IT(IT) ((((IT) & (uint16_t)0x20FF) == 0x00) && ((IT) != (uint16_t)0x00))
+
+#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \
+ ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \
+ ((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \
+ ((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_TXE) || \
+ ((IT) == I2C_IT_RXNE) || ((IT) == I2C_IT_STOPF) || \
+ ((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \
+ ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_flags_definition
+ * @{
+ */
+
+/**
+ * @brief SR2 register flags
+ */
+
+#define I2C_FLAG_DUALF ((uint32_t)0x00800000)
+#define I2C_FLAG_SMBHOST ((uint32_t)0x00400000)
+#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00200000)
+#define I2C_FLAG_GENCALL ((uint32_t)0x00100000)
+#define I2C_FLAG_TRA ((uint32_t)0x00040000)
+#define I2C_FLAG_BUSY ((uint32_t)0x00020000)
+#define I2C_FLAG_MSL ((uint32_t)0x00010000)
+
+/**
+ * @brief SR1 register flags
+ */
+
+#define I2C_FLAG_SMBALERT ((uint32_t)0x10008000)
+#define I2C_FLAG_TIMEOUT ((uint32_t)0x10004000)
+#define I2C_FLAG_PECERR ((uint32_t)0x10001000)
+#define I2C_FLAG_OVR ((uint32_t)0x10000800)
+#define I2C_FLAG_AF ((uint32_t)0x10000400)
+#define I2C_FLAG_ARLO ((uint32_t)0x10000200)
+#define I2C_FLAG_BERR ((uint32_t)0x10000100)
+#define I2C_FLAG_TXE ((uint32_t)0x10000080)
+#define I2C_FLAG_RXNE ((uint32_t)0x10000040)
+#define I2C_FLAG_STOPF ((uint32_t)0x10000010)
+#define I2C_FLAG_ADD10 ((uint32_t)0x10000008)
+#define I2C_FLAG_BTF ((uint32_t)0x10000004)
+#define I2C_FLAG_ADDR ((uint32_t)0x10000002)
+#define I2C_FLAG_SB ((uint32_t)0x10000001)
+
+#define IS_I2C_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0x20FF) == 0x00) && ((FLAG) != (uint16_t)0x00))
+
+#define IS_I2C_GET_FLAG(FLAG) (((FLAG) == I2C_FLAG_DUALF) || ((FLAG) == I2C_FLAG_SMBHOST) || \
+ ((FLAG) == I2C_FLAG_SMBDEFAULT) || ((FLAG) == I2C_FLAG_GENCALL) || \
+ ((FLAG) == I2C_FLAG_TRA) || ((FLAG) == I2C_FLAG_BUSY) || \
+ ((FLAG) == I2C_FLAG_MSL) || ((FLAG) == I2C_FLAG_SMBALERT) || \
+ ((FLAG) == I2C_FLAG_TIMEOUT) || ((FLAG) == I2C_FLAG_PECERR) || \
+ ((FLAG) == I2C_FLAG_OVR) || ((FLAG) == I2C_FLAG_AF) || \
+ ((FLAG) == I2C_FLAG_ARLO) || ((FLAG) == I2C_FLAG_BERR) || \
+ ((FLAG) == I2C_FLAG_TXE) || ((FLAG) == I2C_FLAG_RXNE) || \
+ ((FLAG) == I2C_FLAG_STOPF) || ((FLAG) == I2C_FLAG_ADD10) || \
+ ((FLAG) == I2C_FLAG_BTF) || ((FLAG) == I2C_FLAG_ADDR) || \
+ ((FLAG) == I2C_FLAG_SB))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Events
+ * @{
+ */
+
+/*========================================
+
+ I2C Master Events (Events grouped in order of communication)
+ ==========================================*/
+/**
+ * @brief Communication start
+ *
+ * After sending the START condition (I2C_GenerateSTART() function) the master
+ * has to wait for this event. It means that the Start condition has been correctly
+ * released on the I2C bus (the bus is free, no other devices is communicating).
+ *
+ */
+/* --EV5 */
+#define I2C_EVENT_MASTER_MODE_SELECT ((uint32_t)0x00030001) /* BUSY, MSL and SB flag */
+
+/**
+ * @brief Address Acknowledge
+ *
+ * After checking on EV5 (start condition correctly released on the bus), the
+ * master sends the address of the slave(s) with which it will communicate
+ * (I2C_Send7bitAddress() function, it also determines the direction of the communication:
+ * Master transmitter or Receiver). Then the master has to wait that a slave acknowledges
+ * his address. If an acknowledge is sent on the bus, one of the following events will
+ * be set:
+ *
+ * 1) In case of Master Receiver (7-bit addressing): the I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED
+ * event is set.
+ *
+ * 2) In case of Master Transmitter (7-bit addressing): the I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED
+ * is set
+ *
+ * 3) In case of 10-Bit addressing mode, the master (just after generating the START
+ * and checking on EV5) has to send the header of 10-bit addressing mode (I2C_SendData()
+ * function). Then master should wait on EV9. It means that the 10-bit addressing
+ * header has been correctly sent on the bus. Then master should send the second part of
+ * the 10-bit address (LSB) using the function I2C_Send7bitAddress(). Then master
+ * should wait for event EV6.
+ *
+ */
+
+/* --EV6 */
+#define I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED ((uint32_t)0x00070082) /* BUSY, MSL, ADDR, TXE and TRA flags */
+#define I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED ((uint32_t)0x00030002) /* BUSY, MSL and ADDR flags */
+/* --EV9 */
+#define I2C_EVENT_MASTER_MODE_ADDRESS10 ((uint32_t)0x00030008) /* BUSY, MSL and ADD10 flags */
+
+/**
+ * @brief Communication events
+ *
+ * If a communication is established (START condition generated and slave address
+ * acknowledged) then the master has to check on one of the following events for
+ * communication procedures:
+ *
+ * 1) Master Receiver mode: The master has to wait on the event EV7 then to read
+ * the data received from the slave (I2C_ReceiveData() function).
+ *
+ * 2) Master Transmitter mode: The master has to send data (I2C_SendData()
+ * function) then to wait on event EV8 or EV8_2.
+ * These two events are similar:
+ * - EV8 means that the data has been written in the data register and is
+ * being shifted out.
+ * - EV8_2 means that the data has been physically shifted out and output
+ * on the bus.
+ * In most cases, using EV8 is sufficient for the application.
+ * Using EV8_2 leads to a slower communication but ensure more reliable test.
+ * EV8_2 is also more suitable than EV8 for testing on the last data transmission
+ * (before Stop condition generation).
+ *
+ * @note In case the user software does not guarantee that this event EV7 is
+ * managed before the current byte end of transfer, then user may check on EV7
+ * and BTF flag at the same time (ie. (I2C_EVENT_MASTER_BYTE_RECEIVED | I2C_FLAG_BTF)).
+ * In this case the communication may be slower.
+ *
+ */
+
+/* Master RECEIVER mode -----------------------------*/
+/* --EV7 */
+#define I2C_EVENT_MASTER_BYTE_RECEIVED ((uint32_t)0x00030040) /* BUSY, MSL and RXNE flags */
+
+/* Master TRANSMITTER mode --------------------------*/
+/* --EV8 */
+#define I2C_EVENT_MASTER_BYTE_TRANSMITTING ((uint32_t)0x00070080) /* TRA, BUSY, MSL, TXE flags */
+/* --EV8_2 */
+#define I2C_EVENT_MASTER_BYTE_TRANSMITTED ((uint32_t)0x00070084) /* TRA, BUSY, MSL, TXE and BTF flags */
+
+
+/*========================================
+
+ I2C Slave Events (Events grouped in order of communication)
+ ==========================================*/
+
+/**
+ * @brief Communication start events
+ *
+ * Wait on one of these events at the start of the communication. It means that
+ * the I2C peripheral detected a Start condition on the bus (generated by master
+ * device) followed by the peripheral address. The peripheral generates an ACK
+ * condition on the bus (if the acknowledge feature is enabled through function
+ * I2C_AcknowledgeConfig()) and the events listed above are set :
+ *
+ * 1) In normal case (only one address managed by the slave), when the address
+ * sent by the master matches the own address of the peripheral (configured by
+ * I2C_OwnAddress1 field) the I2C_EVENT_SLAVE_XXX_ADDRESS_MATCHED event is set
+ * (where XXX could be TRANSMITTER or RECEIVER).
+ *
+ * 2) In case the address sent by the master matches the second address of the
+ * peripheral (configured by the function I2C_OwnAddress2Config() and enabled
+ * by the function I2C_DualAddressCmd()) the events I2C_EVENT_SLAVE_XXX_SECONDADDRESS_MATCHED
+ * (where XXX could be TRANSMITTER or RECEIVER) are set.
+ *
+ * 3) In case the address sent by the master is General Call (address 0x00) and
+ * if the General Call is enabled for the peripheral (using function I2C_GeneralCallCmd())
+ * the following event is set I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED.
+ *
+ */
+
+/* --EV1 (all the events below are variants of EV1) */
+/* 1) Case of One Single Address managed by the slave */
+#define I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED ((uint32_t)0x00020002) /* BUSY and ADDR flags */
+#define I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED ((uint32_t)0x00060082) /* TRA, BUSY, TXE and ADDR flags */
+
+/* 2) Case of Dual address managed by the slave */
+#define I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED ((uint32_t)0x00820000) /* DUALF and BUSY flags */
+#define I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((uint32_t)0x00860080) /* DUALF, TRA, BUSY and TXE flags */
+
+/* 3) Case of General Call enabled for the slave */
+#define I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED ((uint32_t)0x00120000) /* GENCALL and BUSY flags */
+
+/**
+ * @brief Communication events
+ *
+ * Wait on one of these events when EV1 has already been checked and:
+ *
+ * - Slave RECEIVER mode:
+ * - EV2: When the application is expecting a data byte to be received.
+ * - EV4: When the application is expecting the end of the communication: master
+ * sends a stop condition and data transmission is stopped.
+ *
+ * - Slave Transmitter mode:
+ * - EV3: When a byte has been transmitted by the slave and the application is expecting
+ * the end of the byte transmission. The two events I2C_EVENT_SLAVE_BYTE_TRANSMITTED and
+ * I2C_EVENT_SLAVE_BYTE_TRANSMITTING are similar. The second one can optionally be
+ * used when the user software doesn't guarantee the EV3 is managed before the
+ * current byte end of transfer.
+ * - EV3_2: When the master sends a NACK in order to tell slave that data transmission
+ * shall end (before sending the STOP condition). In this case slave has to stop sending
+ * data bytes and expect a Stop condition on the bus.
+ *
+ * @note In case the user software does not guarantee that the event EV2 is
+ * managed before the current byte end of transfer, then user may check on EV2
+ * and BTF flag at the same time (ie. (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_BTF)).
+ * In this case the communication may be slower.
+ *
+ */
+
+/* Slave RECEIVER mode --------------------------*/
+/* --EV2 */
+#define I2C_EVENT_SLAVE_BYTE_RECEIVED ((uint32_t)0x00020040) /* BUSY and RXNE flags */
+/* --EV4 */
+#define I2C_EVENT_SLAVE_STOP_DETECTED ((uint32_t)0x00000010) /* STOPF flag */
+
+/* Slave TRANSMITTER mode -----------------------*/
+/* --EV3 */
+#define I2C_EVENT_SLAVE_BYTE_TRANSMITTED ((uint32_t)0x00060084) /* TRA, BUSY, TXE and BTF flags */
+#define I2C_EVENT_SLAVE_BYTE_TRANSMITTING ((uint32_t)0x00060080) /* TRA, BUSY and TXE flags */
+/* --EV3_2 */
+#define I2C_EVENT_SLAVE_ACK_FAILURE ((uint32_t)0x00000400) /* AF flag */
+
+/*=========================== End of Events Description ==========================================*/
+
+#define IS_I2C_EVENT(EVENT) (((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED) || \
+ ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED) || \
+ ((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED) || \
+ ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED) || \
+ ((EVENT) == I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED) || \
+ ((EVENT) == I2C_EVENT_SLAVE_BYTE_RECEIVED) || \
+ ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF)) || \
+ ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL)) || \
+ ((EVENT) == I2C_EVENT_SLAVE_BYTE_TRANSMITTED) || \
+ ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF)) || \
+ ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL)) || \
+ ((EVENT) == I2C_EVENT_SLAVE_STOP_DETECTED) || \
+ ((EVENT) == I2C_EVENT_MASTER_MODE_SELECT) || \
+ ((EVENT) == I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED) || \
+ ((EVENT) == I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED) || \
+ ((EVENT) == I2C_EVENT_MASTER_BYTE_RECEIVED) || \
+ ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTED) || \
+ ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTING) || \
+ ((EVENT) == I2C_EVENT_MASTER_MODE_ADDRESS10) || \
+ ((EVENT) == I2C_EVENT_SLAVE_ACK_FAILURE))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_own_address1
+ * @{
+ */
+
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x3FF)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_clock_speed
+ * @{
+ */
+
+#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) >= 0x1) && ((SPEED) <= 400000))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Functions
+ * @{
+ */
+
+void I2C_DeInit(I2C_TypeDef* I2Cx);
+void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct);
+void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct);
+void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address);
+void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState);
+void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data);
+uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx);
+void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction);
+uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register);
+void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition);
+void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert);
+void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition);
+void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState);
+uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx);
+void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle);
+
+/**
+ * @brief
+ ****************************************************************************************
+ *
+ * I2C State Monitoring Functions
+ *
+ ****************************************************************************************
+ * This I2C driver provides three different ways for I2C state monitoring
+ * depending on the application requirements and constraints:
+ *
+ *
+ * 1) Basic state monitoring:
+ * Using I2C_CheckEvent() function:
+ * It compares the status registers (SR1 and SR2) content to a given event
+ * (can be the combination of one or more flags).
+ * It returns SUCCESS if the current status includes the given flags
+ * and returns ERROR if one or more flags are missing in the current status.
+ * - When to use:
+ * - This function is suitable for most applications as well as for startup
+ * activity since the events are fully described in the product reference manual
+ * (RM0008).
+ * - It is also suitable for users who need to define their own events.
+ * - Limitations:
+ * - If an error occurs (ie. error flags are set besides to the monitored flags),
+ * the I2C_CheckEvent() function may return SUCCESS despite the communication
+ * hold or corrupted real state.
+ * In this case, it is advised to use error interrupts to monitor the error
+ * events and handle them in the interrupt IRQ handler.
+ *
+ * @note
+ * For error management, it is advised to use the following functions:
+ * - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR).
+ * - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs.
+ * Where x is the peripheral instance (I2C1, I2C2 ...)
+ * - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler()
+ * in order to determine which error occurred.
+ * - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd()
+ * and/or I2C_GenerateStop() in order to clear the error flag and source,
+ * and return to correct communication status.
+ *
+ *
+ * 2) Advanced state monitoring:
+ * Using the function I2C_GetLastEvent() which returns the image of both status
+ * registers in a single word (uint32_t) (Status Register 2 value is shifted left
+ * by 16 bits and concatenated to Status Register 1).
+ * - When to use:
+ * - This function is suitable for the same applications above but it allows to
+ * overcome the limitations of I2C_GetFlagStatus() function (see below).
+ * The returned value could be compared to events already defined in the
+ * library (stm32f10x_i2c.h) or to custom values defined by user.
+ * - This function is suitable when multiple flags are monitored at the same time.
+ * - At the opposite of I2C_CheckEvent() function, this function allows user to
+ * choose when an event is accepted (when all events flags are set and no
+ * other flags are set or just when the needed flags are set like
+ * I2C_CheckEvent() function).
+ * - Limitations:
+ * - User may need to define his own events.
+ * - Same remark concerning the error management is applicable for this
+ * function if user decides to check only regular communication flags (and
+ * ignores error flags).
+ *
+ *
+ * 3) Flag-based state monitoring:
+ * Using the function I2C_GetFlagStatus() which simply returns the status of
+ * one single flag (ie. I2C_FLAG_RXNE ...).
+ * - When to use:
+ * - This function could be used for specific applications or in debug phase.
+ * - It is suitable when only one flag checking is needed (most I2C events
+ * are monitored through multiple flags).
+ * - Limitations:
+ * - When calling this function, the Status register is accessed. Some flags are
+ * cleared when the status register is accessed. So checking the status
+ * of one Flag, may clear other ones.
+ * - Function may need to be called twice or more in order to monitor one
+ * single event.
+ *
+ */
+
+/**
+ *
+ * 1) Basic state monitoring
+ *******************************************************************************
+ */
+ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT);
+/**
+ *
+ * 2) Advanced state monitoring
+ *******************************************************************************
+ */
+uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx);
+/**
+ *
+ * 3) Flag-based state monitoring
+ *******************************************************************************
+ */
+FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG);
+/**
+ *
+ *******************************************************************************
+ */
+
+void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG);
+ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT);
+void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_I2C_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_iwdg.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_iwdg.h
new file mode 100644
index 00000000..7f5ab764
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_iwdg.h
@@ -0,0 +1,140 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_iwdg.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the IWDG
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_IWDG_H
+#define __STM32F10x_IWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup IWDG
+ * @{
+ */
+
+/** @defgroup IWDG_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Exported_Constants
+ * @{
+ */
+
+/** @defgroup IWDG_WriteAccess
+ * @{
+ */
+
+#define IWDG_WriteAccess_Enable ((uint16_t)0x5555)
+#define IWDG_WriteAccess_Disable ((uint16_t)0x0000)
+#define IS_IWDG_WRITE_ACCESS(ACCESS) (((ACCESS) == IWDG_WriteAccess_Enable) || \
+ ((ACCESS) == IWDG_WriteAccess_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_prescaler
+ * @{
+ */
+
+#define IWDG_Prescaler_4 ((uint8_t)0x00)
+#define IWDG_Prescaler_8 ((uint8_t)0x01)
+#define IWDG_Prescaler_16 ((uint8_t)0x02)
+#define IWDG_Prescaler_32 ((uint8_t)0x03)
+#define IWDG_Prescaler_64 ((uint8_t)0x04)
+#define IWDG_Prescaler_128 ((uint8_t)0x05)
+#define IWDG_Prescaler_256 ((uint8_t)0x06)
+#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_Prescaler_4) || \
+ ((PRESCALER) == IWDG_Prescaler_8) || \
+ ((PRESCALER) == IWDG_Prescaler_16) || \
+ ((PRESCALER) == IWDG_Prescaler_32) || \
+ ((PRESCALER) == IWDG_Prescaler_64) || \
+ ((PRESCALER) == IWDG_Prescaler_128)|| \
+ ((PRESCALER) == IWDG_Prescaler_256))
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Flag
+ * @{
+ */
+
+#define IWDG_FLAG_PVU ((uint16_t)0x0001)
+#define IWDG_FLAG_RVU ((uint16_t)0x0002)
+#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || ((FLAG) == IWDG_FLAG_RVU))
+#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Exported_Functions
+ * @{
+ */
+
+void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess);
+void IWDG_SetPrescaler(uint8_t IWDG_Prescaler);
+void IWDG_SetReload(uint16_t Reload);
+void IWDG_ReloadCounter(void);
+void IWDG_Enable(void);
+FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_IWDG_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_pwr.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_pwr.h
new file mode 100644
index 00000000..76e6ce91
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_pwr.h
@@ -0,0 +1,156 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_pwr.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the PWR firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_PWR_H
+#define __STM32F10x_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup PWR
+ * @{
+ */
+
+/** @defgroup PWR_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Exported_Constants
+ * @{
+ */
+
+/** @defgroup PVD_detection_level
+ * @{
+ */
+
+#define PWR_PVDLevel_2V2 ((uint32_t)0x00000000)
+#define PWR_PVDLevel_2V3 ((uint32_t)0x00000020)
+#define PWR_PVDLevel_2V4 ((uint32_t)0x00000040)
+#define PWR_PVDLevel_2V5 ((uint32_t)0x00000060)
+#define PWR_PVDLevel_2V6 ((uint32_t)0x00000080)
+#define PWR_PVDLevel_2V7 ((uint32_t)0x000000A0)
+#define PWR_PVDLevel_2V8 ((uint32_t)0x000000C0)
+#define PWR_PVDLevel_2V9 ((uint32_t)0x000000E0)
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_2V2) || ((LEVEL) == PWR_PVDLevel_2V3)|| \
+ ((LEVEL) == PWR_PVDLevel_2V4) || ((LEVEL) == PWR_PVDLevel_2V5)|| \
+ ((LEVEL) == PWR_PVDLevel_2V6) || ((LEVEL) == PWR_PVDLevel_2V7)|| \
+ ((LEVEL) == PWR_PVDLevel_2V8) || ((LEVEL) == PWR_PVDLevel_2V9))
+/**
+ * @}
+ */
+
+/** @defgroup Regulator_state_is_STOP_mode
+ * @{
+ */
+
+#define PWR_Regulator_ON ((uint32_t)0x00000000)
+#define PWR_Regulator_LowPower ((uint32_t)0x00000001)
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \
+ ((REGULATOR) == PWR_Regulator_LowPower))
+/**
+ * @}
+ */
+
+/** @defgroup STOP_mode_entry
+ * @{
+ */
+
+#define PWR_STOPEntry_WFI ((uint8_t)0x01)
+#define PWR_STOPEntry_WFE ((uint8_t)0x02)
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE))
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Flag
+ * @{
+ */
+
+#define PWR_FLAG_WU ((uint32_t)0x00000001)
+#define PWR_FLAG_SB ((uint32_t)0x00000002)
+#define PWR_FLAG_PVDO ((uint32_t)0x00000004)
+#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
+ ((FLAG) == PWR_FLAG_PVDO))
+
+#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Exported_Functions
+ * @{
+ */
+
+void PWR_DeInit(void);
+void PWR_BackupAccessCmd(FunctionalState NewState);
+void PWR_PVDCmd(FunctionalState NewState);
+void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel);
+void PWR_WakeUpPinCmd(FunctionalState NewState);
+void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry);
+void PWR_EnterSTANDBYMode(void);
+FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG);
+void PWR_ClearFlag(uint32_t PWR_FLAG);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_PWR_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_rcc.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_rcc.h
new file mode 100644
index 00000000..b3b7d821
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_rcc.h
@@ -0,0 +1,727 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_rcc.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the RCC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_RCC_H
+#define __STM32F10x_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/** @defgroup RCC_Exported_Types
+ * @{
+ */
+
+typedef struct
+{
+ uint32_t SYSCLK_Frequency; /*!< returns SYSCLK clock frequency expressed in Hz */
+ uint32_t HCLK_Frequency; /*!< returns HCLK clock frequency expressed in Hz */
+ uint32_t PCLK1_Frequency; /*!< returns PCLK1 clock frequency expressed in Hz */
+ uint32_t PCLK2_Frequency; /*!< returns PCLK2 clock frequency expressed in Hz */
+ uint32_t ADCCLK_Frequency; /*!< returns ADCCLK clock frequency expressed in Hz */
+}RCC_ClocksTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup HSE_configuration
+ * @{
+ */
+
+#define RCC_HSE_OFF ((uint32_t)0x00000000)
+#define RCC_HSE_ON ((uint32_t)0x00010000)
+#define RCC_HSE_Bypass ((uint32_t)0x00040000)
+#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
+ ((HSE) == RCC_HSE_Bypass))
+
+/**
+ * @}
+ */
+
+/** @defgroup PLL_entry_clock_source
+ * @{
+ */
+
+#define RCC_PLLSource_HSI_Div2 ((uint32_t)0x00000000)
+
+#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_CL)
+ #define RCC_PLLSource_HSE_Div1 ((uint32_t)0x00010000)
+ #define RCC_PLLSource_HSE_Div2 ((uint32_t)0x00030000)
+ #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \
+ ((SOURCE) == RCC_PLLSource_HSE_Div1) || \
+ ((SOURCE) == RCC_PLLSource_HSE_Div2))
+#else
+ #define RCC_PLLSource_PREDIV1 ((uint32_t)0x00010000)
+ #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \
+ ((SOURCE) == RCC_PLLSource_PREDIV1))
+#endif /* STM32F10X_CL */
+
+/**
+ * @}
+ */
+
+/** @defgroup PLL_multiplication_factor
+ * @{
+ */
+#ifndef STM32F10X_CL
+ #define RCC_PLLMul_2 ((uint32_t)0x00000000)
+ #define RCC_PLLMul_3 ((uint32_t)0x00040000)
+ #define RCC_PLLMul_4 ((uint32_t)0x00080000)
+ #define RCC_PLLMul_5 ((uint32_t)0x000C0000)
+ #define RCC_PLLMul_6 ((uint32_t)0x00100000)
+ #define RCC_PLLMul_7 ((uint32_t)0x00140000)
+ #define RCC_PLLMul_8 ((uint32_t)0x00180000)
+ #define RCC_PLLMul_9 ((uint32_t)0x001C0000)
+ #define RCC_PLLMul_10 ((uint32_t)0x00200000)
+ #define RCC_PLLMul_11 ((uint32_t)0x00240000)
+ #define RCC_PLLMul_12 ((uint32_t)0x00280000)
+ #define RCC_PLLMul_13 ((uint32_t)0x002C0000)
+ #define RCC_PLLMul_14 ((uint32_t)0x00300000)
+ #define RCC_PLLMul_15 ((uint32_t)0x00340000)
+ #define RCC_PLLMul_16 ((uint32_t)0x00380000)
+ #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_2) || ((MUL) == RCC_PLLMul_3) || \
+ ((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \
+ ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \
+ ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \
+ ((MUL) == RCC_PLLMul_10) || ((MUL) == RCC_PLLMul_11) || \
+ ((MUL) == RCC_PLLMul_12) || ((MUL) == RCC_PLLMul_13) || \
+ ((MUL) == RCC_PLLMul_14) || ((MUL) == RCC_PLLMul_15) || \
+ ((MUL) == RCC_PLLMul_16))
+
+#else
+ #define RCC_PLLMul_4 ((uint32_t)0x00080000)
+ #define RCC_PLLMul_5 ((uint32_t)0x000C0000)
+ #define RCC_PLLMul_6 ((uint32_t)0x00100000)
+ #define RCC_PLLMul_7 ((uint32_t)0x00140000)
+ #define RCC_PLLMul_8 ((uint32_t)0x00180000)
+ #define RCC_PLLMul_9 ((uint32_t)0x001C0000)
+ #define RCC_PLLMul_6_5 ((uint32_t)0x00340000)
+
+ #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \
+ ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \
+ ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \
+ ((MUL) == RCC_PLLMul_6_5))
+#endif /* STM32F10X_CL */
+/**
+ * @}
+ */
+
+/** @defgroup PREDIV1_division_factor
+ * @{
+ */
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+ #define RCC_PREDIV1_Div1 ((uint32_t)0x00000000)
+ #define RCC_PREDIV1_Div2 ((uint32_t)0x00000001)
+ #define RCC_PREDIV1_Div3 ((uint32_t)0x00000002)
+ #define RCC_PREDIV1_Div4 ((uint32_t)0x00000003)
+ #define RCC_PREDIV1_Div5 ((uint32_t)0x00000004)
+ #define RCC_PREDIV1_Div6 ((uint32_t)0x00000005)
+ #define RCC_PREDIV1_Div7 ((uint32_t)0x00000006)
+ #define RCC_PREDIV1_Div8 ((uint32_t)0x00000007)
+ #define RCC_PREDIV1_Div9 ((uint32_t)0x00000008)
+ #define RCC_PREDIV1_Div10 ((uint32_t)0x00000009)
+ #define RCC_PREDIV1_Div11 ((uint32_t)0x0000000A)
+ #define RCC_PREDIV1_Div12 ((uint32_t)0x0000000B)
+ #define RCC_PREDIV1_Div13 ((uint32_t)0x0000000C)
+ #define RCC_PREDIV1_Div14 ((uint32_t)0x0000000D)
+ #define RCC_PREDIV1_Div15 ((uint32_t)0x0000000E)
+ #define RCC_PREDIV1_Div16 ((uint32_t)0x0000000F)
+
+ #define IS_RCC_PREDIV1(PREDIV1) (((PREDIV1) == RCC_PREDIV1_Div1) || ((PREDIV1) == RCC_PREDIV1_Div2) || \
+ ((PREDIV1) == RCC_PREDIV1_Div3) || ((PREDIV1) == RCC_PREDIV1_Div4) || \
+ ((PREDIV1) == RCC_PREDIV1_Div5) || ((PREDIV1) == RCC_PREDIV1_Div6) || \
+ ((PREDIV1) == RCC_PREDIV1_Div7) || ((PREDIV1) == RCC_PREDIV1_Div8) || \
+ ((PREDIV1) == RCC_PREDIV1_Div9) || ((PREDIV1) == RCC_PREDIV1_Div10) || \
+ ((PREDIV1) == RCC_PREDIV1_Div11) || ((PREDIV1) == RCC_PREDIV1_Div12) || \
+ ((PREDIV1) == RCC_PREDIV1_Div13) || ((PREDIV1) == RCC_PREDIV1_Div14) || \
+ ((PREDIV1) == RCC_PREDIV1_Div15) || ((PREDIV1) == RCC_PREDIV1_Div16))
+#endif
+/**
+ * @}
+ */
+
+
+/** @defgroup PREDIV1_clock_source
+ * @{
+ */
+#ifdef STM32F10X_CL
+/* PREDIV1 clock source (for STM32 connectivity line devices) */
+ #define RCC_PREDIV1_Source_HSE ((uint32_t)0x00000000)
+ #define RCC_PREDIV1_Source_PLL2 ((uint32_t)0x00010000)
+
+ #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE) || \
+ ((SOURCE) == RCC_PREDIV1_Source_PLL2))
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/* PREDIV1 clock source (for STM32 Value line devices) */
+ #define RCC_PREDIV1_Source_HSE ((uint32_t)0x00000000)
+
+ #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE))
+#endif
+/**
+ * @}
+ */
+
+#ifdef STM32F10X_CL
+/** @defgroup PREDIV2_division_factor
+ * @{
+ */
+
+ #define RCC_PREDIV2_Div1 ((uint32_t)0x00000000)
+ #define RCC_PREDIV2_Div2 ((uint32_t)0x00000010)
+ #define RCC_PREDIV2_Div3 ((uint32_t)0x00000020)
+ #define RCC_PREDIV2_Div4 ((uint32_t)0x00000030)
+ #define RCC_PREDIV2_Div5 ((uint32_t)0x00000040)
+ #define RCC_PREDIV2_Div6 ((uint32_t)0x00000050)
+ #define RCC_PREDIV2_Div7 ((uint32_t)0x00000060)
+ #define RCC_PREDIV2_Div8 ((uint32_t)0x00000070)
+ #define RCC_PREDIV2_Div9 ((uint32_t)0x00000080)
+ #define RCC_PREDIV2_Div10 ((uint32_t)0x00000090)
+ #define RCC_PREDIV2_Div11 ((uint32_t)0x000000A0)
+ #define RCC_PREDIV2_Div12 ((uint32_t)0x000000B0)
+ #define RCC_PREDIV2_Div13 ((uint32_t)0x000000C0)
+ #define RCC_PREDIV2_Div14 ((uint32_t)0x000000D0)
+ #define RCC_PREDIV2_Div15 ((uint32_t)0x000000E0)
+ #define RCC_PREDIV2_Div16 ((uint32_t)0x000000F0)
+
+ #define IS_RCC_PREDIV2(PREDIV2) (((PREDIV2) == RCC_PREDIV2_Div1) || ((PREDIV2) == RCC_PREDIV2_Div2) || \
+ ((PREDIV2) == RCC_PREDIV2_Div3) || ((PREDIV2) == RCC_PREDIV2_Div4) || \
+ ((PREDIV2) == RCC_PREDIV2_Div5) || ((PREDIV2) == RCC_PREDIV2_Div6) || \
+ ((PREDIV2) == RCC_PREDIV2_Div7) || ((PREDIV2) == RCC_PREDIV2_Div8) || \
+ ((PREDIV2) == RCC_PREDIV2_Div9) || ((PREDIV2) == RCC_PREDIV2_Div10) || \
+ ((PREDIV2) == RCC_PREDIV2_Div11) || ((PREDIV2) == RCC_PREDIV2_Div12) || \
+ ((PREDIV2) == RCC_PREDIV2_Div13) || ((PREDIV2) == RCC_PREDIV2_Div14) || \
+ ((PREDIV2) == RCC_PREDIV2_Div15) || ((PREDIV2) == RCC_PREDIV2_Div16))
+/**
+ * @}
+ */
+
+
+/** @defgroup PLL2_multiplication_factor
+ * @{
+ */
+
+ #define RCC_PLL2Mul_8 ((uint32_t)0x00000600)
+ #define RCC_PLL2Mul_9 ((uint32_t)0x00000700)
+ #define RCC_PLL2Mul_10 ((uint32_t)0x00000800)
+ #define RCC_PLL2Mul_11 ((uint32_t)0x00000900)
+ #define RCC_PLL2Mul_12 ((uint32_t)0x00000A00)
+ #define RCC_PLL2Mul_13 ((uint32_t)0x00000B00)
+ #define RCC_PLL2Mul_14 ((uint32_t)0x00000C00)
+ #define RCC_PLL2Mul_16 ((uint32_t)0x00000E00)
+ #define RCC_PLL2Mul_20 ((uint32_t)0x00000F00)
+
+ #define IS_RCC_PLL2_MUL(MUL) (((MUL) == RCC_PLL2Mul_8) || ((MUL) == RCC_PLL2Mul_9) || \
+ ((MUL) == RCC_PLL2Mul_10) || ((MUL) == RCC_PLL2Mul_11) || \
+ ((MUL) == RCC_PLL2Mul_12) || ((MUL) == RCC_PLL2Mul_13) || \
+ ((MUL) == RCC_PLL2Mul_14) || ((MUL) == RCC_PLL2Mul_16) || \
+ ((MUL) == RCC_PLL2Mul_20))
+/**
+ * @}
+ */
+
+
+/** @defgroup PLL3_multiplication_factor
+ * @{
+ */
+
+ #define RCC_PLL3Mul_8 ((uint32_t)0x00006000)
+ #define RCC_PLL3Mul_9 ((uint32_t)0x00007000)
+ #define RCC_PLL3Mul_10 ((uint32_t)0x00008000)
+ #define RCC_PLL3Mul_11 ((uint32_t)0x00009000)
+ #define RCC_PLL3Mul_12 ((uint32_t)0x0000A000)
+ #define RCC_PLL3Mul_13 ((uint32_t)0x0000B000)
+ #define RCC_PLL3Mul_14 ((uint32_t)0x0000C000)
+ #define RCC_PLL3Mul_16 ((uint32_t)0x0000E000)
+ #define RCC_PLL3Mul_20 ((uint32_t)0x0000F000)
+
+ #define IS_RCC_PLL3_MUL(MUL) (((MUL) == RCC_PLL3Mul_8) || ((MUL) == RCC_PLL3Mul_9) || \
+ ((MUL) == RCC_PLL3Mul_10) || ((MUL) == RCC_PLL3Mul_11) || \
+ ((MUL) == RCC_PLL3Mul_12) || ((MUL) == RCC_PLL3Mul_13) || \
+ ((MUL) == RCC_PLL3Mul_14) || ((MUL) == RCC_PLL3Mul_16) || \
+ ((MUL) == RCC_PLL3Mul_20))
+/**
+ * @}
+ */
+
+#endif /* STM32F10X_CL */
+
+
+/** @defgroup System_clock_source
+ * @{
+ */
+
+#define RCC_SYSCLKSource_HSI ((uint32_t)0x00000000)
+#define RCC_SYSCLKSource_HSE ((uint32_t)0x00000001)
+#define RCC_SYSCLKSource_PLLCLK ((uint32_t)0x00000002)
+#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSource_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSource_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup AHB_clock_source
+ * @{
+ */
+
+#define RCC_SYSCLK_Div1 ((uint32_t)0x00000000)
+#define RCC_SYSCLK_Div2 ((uint32_t)0x00000080)
+#define RCC_SYSCLK_Div4 ((uint32_t)0x00000090)
+#define RCC_SYSCLK_Div8 ((uint32_t)0x000000A0)
+#define RCC_SYSCLK_Div16 ((uint32_t)0x000000B0)
+#define RCC_SYSCLK_Div64 ((uint32_t)0x000000C0)
+#define RCC_SYSCLK_Div128 ((uint32_t)0x000000D0)
+#define RCC_SYSCLK_Div256 ((uint32_t)0x000000E0)
+#define RCC_SYSCLK_Div512 ((uint32_t)0x000000F0)
+#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \
+ ((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \
+ ((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \
+ ((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \
+ ((HCLK) == RCC_SYSCLK_Div512))
+/**
+ * @}
+ */
+
+/** @defgroup APB1_APB2_clock_source
+ * @{
+ */
+
+#define RCC_HCLK_Div1 ((uint32_t)0x00000000)
+#define RCC_HCLK_Div2 ((uint32_t)0x00000400)
+#define RCC_HCLK_Div4 ((uint32_t)0x00000500)
+#define RCC_HCLK_Div8 ((uint32_t)0x00000600)
+#define RCC_HCLK_Div16 ((uint32_t)0x00000700)
+#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \
+ ((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \
+ ((PCLK) == RCC_HCLK_Div16))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Interrupt_source
+ * @{
+ */
+
+#define RCC_IT_LSIRDY ((uint8_t)0x01)
+#define RCC_IT_LSERDY ((uint8_t)0x02)
+#define RCC_IT_HSIRDY ((uint8_t)0x04)
+#define RCC_IT_HSERDY ((uint8_t)0x08)
+#define RCC_IT_PLLRDY ((uint8_t)0x10)
+#define RCC_IT_CSS ((uint8_t)0x80)
+
+#ifndef STM32F10X_CL
+ #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0xE0) == 0x00) && ((IT) != 0x00))
+ #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \
+ ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \
+ ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS))
+ #define IS_RCC_CLEAR_IT(IT) ((((IT) & (uint8_t)0x60) == 0x00) && ((IT) != 0x00))
+#else
+ #define RCC_IT_PLL2RDY ((uint8_t)0x20)
+ #define RCC_IT_PLL3RDY ((uint8_t)0x40)
+ #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0x80) == 0x00) && ((IT) != 0x00))
+ #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \
+ ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \
+ ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS) || \
+ ((IT) == RCC_IT_PLL2RDY) || ((IT) == RCC_IT_PLL3RDY))
+ #define IS_RCC_CLEAR_IT(IT) ((IT) != 0x00)
+#endif /* STM32F10X_CL */
+
+
+/**
+ * @}
+ */
+
+#ifndef STM32F10X_CL
+/** @defgroup USB_Device_clock_source
+ * @{
+ */
+
+ #define RCC_USBCLKSource_PLLCLK_1Div5 ((uint8_t)0x00)
+ #define RCC_USBCLKSource_PLLCLK_Div1 ((uint8_t)0x01)
+
+ #define IS_RCC_USBCLK_SOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSource_PLLCLK_1Div5) || \
+ ((SOURCE) == RCC_USBCLKSource_PLLCLK_Div1))
+/**
+ * @}
+ */
+#else
+/** @defgroup USB_OTG_FS_clock_source
+ * @{
+ */
+ #define RCC_OTGFSCLKSource_PLLVCO_Div3 ((uint8_t)0x00)
+ #define RCC_OTGFSCLKSource_PLLVCO_Div2 ((uint8_t)0x01)
+
+ #define IS_RCC_OTGFSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div3) || \
+ ((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div2))
+/**
+ * @}
+ */
+#endif /* STM32F10X_CL */
+
+
+#ifdef STM32F10X_CL
+/** @defgroup I2S2_clock_source
+ * @{
+ */
+ #define RCC_I2S2CLKSource_SYSCLK ((uint8_t)0x00)
+ #define RCC_I2S2CLKSource_PLL3_VCO ((uint8_t)0x01)
+
+ #define IS_RCC_I2S2CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S2CLKSource_SYSCLK) || \
+ ((SOURCE) == RCC_I2S2CLKSource_PLL3_VCO))
+/**
+ * @}
+ */
+
+/** @defgroup I2S3_clock_source
+ * @{
+ */
+ #define RCC_I2S3CLKSource_SYSCLK ((uint8_t)0x00)
+ #define RCC_I2S3CLKSource_PLL3_VCO ((uint8_t)0x01)
+
+ #define IS_RCC_I2S3CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S3CLKSource_SYSCLK) || \
+ ((SOURCE) == RCC_I2S3CLKSource_PLL3_VCO))
+/**
+ * @}
+ */
+#endif /* STM32F10X_CL */
+
+
+/** @defgroup ADC_clock_source
+ * @{
+ */
+
+#define RCC_PCLK2_Div2 ((uint32_t)0x00000000)
+#define RCC_PCLK2_Div4 ((uint32_t)0x00004000)
+#define RCC_PCLK2_Div6 ((uint32_t)0x00008000)
+#define RCC_PCLK2_Div8 ((uint32_t)0x0000C000)
+#define IS_RCC_ADCCLK(ADCCLK) (((ADCCLK) == RCC_PCLK2_Div2) || ((ADCCLK) == RCC_PCLK2_Div4) || \
+ ((ADCCLK) == RCC_PCLK2_Div6) || ((ADCCLK) == RCC_PCLK2_Div8))
+/**
+ * @}
+ */
+
+/** @defgroup LSE_configuration
+ * @{
+ */
+
+#define RCC_LSE_OFF ((uint8_t)0x00)
+#define RCC_LSE_ON ((uint8_t)0x01)
+#define RCC_LSE_Bypass ((uint8_t)0x04)
+#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
+ ((LSE) == RCC_LSE_Bypass))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_clock_source
+ * @{
+ */
+
+#define RCC_RTCCLKSource_LSE ((uint32_t)0x00000100)
+#define RCC_RTCCLKSource_LSI ((uint32_t)0x00000200)
+#define RCC_RTCCLKSource_HSE_Div128 ((uint32_t)0x00000300)
+#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \
+ ((SOURCE) == RCC_RTCCLKSource_LSI) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div128))
+/**
+ * @}
+ */
+
+/** @defgroup AHB_peripheral
+ * @{
+ */
+
+#define RCC_AHBPeriph_DMA1 ((uint32_t)0x00000001)
+#define RCC_AHBPeriph_DMA2 ((uint32_t)0x00000002)
+#define RCC_AHBPeriph_SRAM ((uint32_t)0x00000004)
+#define RCC_AHBPeriph_FLITF ((uint32_t)0x00000010)
+#define RCC_AHBPeriph_CRC ((uint32_t)0x00000040)
+
+#ifndef STM32F10X_CL
+ #define RCC_AHBPeriph_FSMC ((uint32_t)0x00000100)
+ #define RCC_AHBPeriph_SDIO ((uint32_t)0x00000400)
+ #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFAA8) == 0x00) && ((PERIPH) != 0x00))
+#else
+ #define RCC_AHBPeriph_OTG_FS ((uint32_t)0x00001000)
+ #define RCC_AHBPeriph_ETH_MAC ((uint32_t)0x00004000)
+ #define RCC_AHBPeriph_ETH_MAC_Tx ((uint32_t)0x00008000)
+ #define RCC_AHBPeriph_ETH_MAC_Rx ((uint32_t)0x00010000)
+
+ #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFE2FA8) == 0x00) && ((PERIPH) != 0x00))
+ #define IS_RCC_AHB_PERIPH_RESET(PERIPH) ((((PERIPH) & 0xFFFFAFFF) == 0x00) && ((PERIPH) != 0x00))
+#endif /* STM32F10X_CL */
+/**
+ * @}
+ */
+
+/** @defgroup APB2_peripheral
+ * @{
+ */
+
+#define RCC_APB2Periph_AFIO ((uint32_t)0x00000001)
+#define RCC_APB2Periph_GPIOA ((uint32_t)0x00000004)
+#define RCC_APB2Periph_GPIOB ((uint32_t)0x00000008)
+#define RCC_APB2Periph_GPIOC ((uint32_t)0x00000010)
+#define RCC_APB2Periph_GPIOD ((uint32_t)0x00000020)
+#define RCC_APB2Periph_GPIOE ((uint32_t)0x00000040)
+#define RCC_APB2Periph_GPIOF ((uint32_t)0x00000080)
+#define RCC_APB2Periph_GPIOG ((uint32_t)0x00000100)
+#define RCC_APB2Periph_ADC1 ((uint32_t)0x00000200)
+#define RCC_APB2Periph_ADC2 ((uint32_t)0x00000400)
+#define RCC_APB2Periph_TIM1 ((uint32_t)0x00000800)
+#define RCC_APB2Periph_SPI1 ((uint32_t)0x00001000)
+#define RCC_APB2Periph_TIM8 ((uint32_t)0x00002000)
+#define RCC_APB2Periph_USART1 ((uint32_t)0x00004000)
+#define RCC_APB2Periph_ADC3 ((uint32_t)0x00008000)
+#define RCC_APB2Periph_TIM15 ((uint32_t)0x00010000)
+#define RCC_APB2Periph_TIM16 ((uint32_t)0x00020000)
+#define RCC_APB2Periph_TIM17 ((uint32_t)0x00040000)
+#define RCC_APB2Periph_TIM9 ((uint32_t)0x00080000)
+#define RCC_APB2Periph_TIM10 ((uint32_t)0x00100000)
+#define RCC_APB2Periph_TIM11 ((uint32_t)0x00200000)
+
+#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFC00002) == 0x00) && ((PERIPH) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup APB1_peripheral
+ * @{
+ */
+
+#define RCC_APB1Periph_TIM2 ((uint32_t)0x00000001)
+#define RCC_APB1Periph_TIM3 ((uint32_t)0x00000002)
+#define RCC_APB1Periph_TIM4 ((uint32_t)0x00000004)
+#define RCC_APB1Periph_TIM5 ((uint32_t)0x00000008)
+#define RCC_APB1Periph_TIM6 ((uint32_t)0x00000010)
+#define RCC_APB1Periph_TIM7 ((uint32_t)0x00000020)
+#define RCC_APB1Periph_TIM12 ((uint32_t)0x00000040)
+#define RCC_APB1Periph_TIM13 ((uint32_t)0x00000080)
+#define RCC_APB1Periph_TIM14 ((uint32_t)0x00000100)
+#define RCC_APB1Periph_WWDG ((uint32_t)0x00000800)
+#define RCC_APB1Periph_SPI2 ((uint32_t)0x00004000)
+#define RCC_APB1Periph_SPI3 ((uint32_t)0x00008000)
+#define RCC_APB1Periph_USART2 ((uint32_t)0x00020000)
+#define RCC_APB1Periph_USART3 ((uint32_t)0x00040000)
+#define RCC_APB1Periph_UART4 ((uint32_t)0x00080000)
+#define RCC_APB1Periph_UART5 ((uint32_t)0x00100000)
+#define RCC_APB1Periph_I2C1 ((uint32_t)0x00200000)
+#define RCC_APB1Periph_I2C2 ((uint32_t)0x00400000)
+#define RCC_APB1Periph_USB ((uint32_t)0x00800000)
+#define RCC_APB1Periph_CAN1 ((uint32_t)0x02000000)
+#define RCC_APB1Periph_CAN2 ((uint32_t)0x04000000)
+#define RCC_APB1Periph_BKP ((uint32_t)0x08000000)
+#define RCC_APB1Periph_PWR ((uint32_t)0x10000000)
+#define RCC_APB1Periph_DAC ((uint32_t)0x20000000)
+#define RCC_APB1Periph_CEC ((uint32_t)0x40000000)
+
+#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0x81013600) == 0x00) && ((PERIPH) != 0x00))
+
+/**
+ * @}
+ */
+
+/** @defgroup Clock_source_to_output_on_MCO_pin
+ * @{
+ */
+
+#define RCC_MCO_NoClock ((uint8_t)0x00)
+#define RCC_MCO_SYSCLK ((uint8_t)0x04)
+#define RCC_MCO_HSI ((uint8_t)0x05)
+#define RCC_MCO_HSE ((uint8_t)0x06)
+#define RCC_MCO_PLLCLK_Div2 ((uint8_t)0x07)
+
+#ifndef STM32F10X_CL
+ #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \
+ ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \
+ ((MCO) == RCC_MCO_PLLCLK_Div2))
+#else
+ #define RCC_MCO_PLL2CLK ((uint8_t)0x08)
+ #define RCC_MCO_PLL3CLK_Div2 ((uint8_t)0x09)
+ #define RCC_MCO_XT1 ((uint8_t)0x0A)
+ #define RCC_MCO_PLL3CLK ((uint8_t)0x0B)
+
+ #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \
+ ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \
+ ((MCO) == RCC_MCO_PLLCLK_Div2) || ((MCO) == RCC_MCO_PLL2CLK) || \
+ ((MCO) == RCC_MCO_PLL3CLK_Div2) || ((MCO) == RCC_MCO_XT1) || \
+ ((MCO) == RCC_MCO_PLL3CLK))
+#endif /* STM32F10X_CL */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flag
+ * @{
+ */
+
+#define RCC_FLAG_HSIRDY ((uint8_t)0x21)
+#define RCC_FLAG_HSERDY ((uint8_t)0x31)
+#define RCC_FLAG_PLLRDY ((uint8_t)0x39)
+#define RCC_FLAG_LSERDY ((uint8_t)0x41)
+#define RCC_FLAG_LSIRDY ((uint8_t)0x61)
+#define RCC_FLAG_PINRST ((uint8_t)0x7A)
+#define RCC_FLAG_PORRST ((uint8_t)0x7B)
+#define RCC_FLAG_SFTRST ((uint8_t)0x7C)
+#define RCC_FLAG_IWDGRST ((uint8_t)0x7D)
+#define RCC_FLAG_WWDGRST ((uint8_t)0x7E)
+#define RCC_FLAG_LPWRRST ((uint8_t)0x7F)
+
+#ifndef STM32F10X_CL
+ #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \
+ ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \
+ ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \
+ ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \
+ ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \
+ ((FLAG) == RCC_FLAG_LPWRRST))
+#else
+ #define RCC_FLAG_PLL2RDY ((uint8_t)0x3B)
+ #define RCC_FLAG_PLL3RDY ((uint8_t)0x3D)
+ #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \
+ ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \
+ ((FLAG) == RCC_FLAG_PLL2RDY) || ((FLAG) == RCC_FLAG_PLL3RDY) || \
+ ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \
+ ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \
+ ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \
+ ((FLAG) == RCC_FLAG_LPWRRST))
+#endif /* STM32F10X_CL */
+
+#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Exported_Functions
+ * @{
+ */
+
+void RCC_DeInit(void);
+void RCC_HSEConfig(uint32_t RCC_HSE);
+ErrorStatus RCC_WaitForHSEStartUp(void);
+void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue);
+void RCC_HSICmd(FunctionalState NewState);
+void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul);
+void RCC_PLLCmd(FunctionalState NewState);
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+ void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div);
+#endif
+
+#ifdef STM32F10X_CL
+ void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div);
+ void RCC_PLL2Config(uint32_t RCC_PLL2Mul);
+ void RCC_PLL2Cmd(FunctionalState NewState);
+ void RCC_PLL3Config(uint32_t RCC_PLL3Mul);
+ void RCC_PLL3Cmd(FunctionalState NewState);
+#endif /* STM32F10X_CL */
+
+void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource);
+uint8_t RCC_GetSYSCLKSource(void);
+void RCC_HCLKConfig(uint32_t RCC_SYSCLK);
+void RCC_PCLK1Config(uint32_t RCC_HCLK);
+void RCC_PCLK2Config(uint32_t RCC_HCLK);
+void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState);
+
+#ifndef STM32F10X_CL
+ void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource);
+#else
+ void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource);
+#endif /* STM32F10X_CL */
+
+void RCC_ADCCLKConfig(uint32_t RCC_PCLK2);
+
+#ifdef STM32F10X_CL
+ void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource);
+ void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource);
+#endif /* STM32F10X_CL */
+
+void RCC_LSEConfig(uint8_t RCC_LSE);
+void RCC_LSICmd(FunctionalState NewState);
+void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource);
+void RCC_RTCCLKCmd(FunctionalState NewState);
+void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks);
+void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState);
+void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState);
+void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState);
+
+#ifdef STM32F10X_CL
+void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState);
+#endif /* STM32F10X_CL */
+
+void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState);
+void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState);
+void RCC_BackupResetCmd(FunctionalState NewState);
+void RCC_ClockSecuritySystemCmd(FunctionalState NewState);
+void RCC_MCOConfig(uint8_t RCC_MCO);
+FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG);
+void RCC_ClearFlag(void);
+ITStatus RCC_GetITStatus(uint8_t RCC_IT);
+void RCC_ClearITPendingBit(uint8_t RCC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_RCC_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_rtc.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_rtc.h
new file mode 100644
index 00000000..214a5893
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_rtc.h
@@ -0,0 +1,135 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_rtc.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the RTC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_RTC_H
+#define __STM32F10x_RTC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup RTC
+ * @{
+ */
+
+/** @defgroup RTC_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup RTC_interrupts_define
+ * @{
+ */
+
+#define RTC_IT_OW ((uint16_t)0x0004) /*!< Overflow interrupt */
+#define RTC_IT_ALR ((uint16_t)0x0002) /*!< Alarm interrupt */
+#define RTC_IT_SEC ((uint16_t)0x0001) /*!< Second interrupt */
+#define IS_RTC_IT(IT) ((((IT) & (uint16_t)0xFFF8) == 0x00) && ((IT) != 0x00))
+#define IS_RTC_GET_IT(IT) (((IT) == RTC_IT_OW) || ((IT) == RTC_IT_ALR) || \
+ ((IT) == RTC_IT_SEC))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_interrupts_flags
+ * @{
+ */
+
+#define RTC_FLAG_RTOFF ((uint16_t)0x0020) /*!< RTC Operation OFF flag */
+#define RTC_FLAG_RSF ((uint16_t)0x0008) /*!< Registers Synchronized flag */
+#define RTC_FLAG_OW ((uint16_t)0x0004) /*!< Overflow flag */
+#define RTC_FLAG_ALR ((uint16_t)0x0002) /*!< Alarm flag */
+#define RTC_FLAG_SEC ((uint16_t)0x0001) /*!< Second flag */
+#define IS_RTC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFFF0) == 0x00) && ((FLAG) != 0x00))
+#define IS_RTC_GET_FLAG(FLAG) (((FLAG) == RTC_FLAG_RTOFF) || ((FLAG) == RTC_FLAG_RSF) || \
+ ((FLAG) == RTC_FLAG_OW) || ((FLAG) == RTC_FLAG_ALR) || \
+ ((FLAG) == RTC_FLAG_SEC))
+#define IS_RTC_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFFFFF)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions
+ * @{
+ */
+
+void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState);
+void RTC_EnterConfigMode(void);
+void RTC_ExitConfigMode(void);
+uint32_t RTC_GetCounter(void);
+void RTC_SetCounter(uint32_t CounterValue);
+void RTC_SetPrescaler(uint32_t PrescalerValue);
+void RTC_SetAlarm(uint32_t AlarmValue);
+uint32_t RTC_GetDivider(void);
+void RTC_WaitForLastTask(void);
+void RTC_WaitForSynchro(void);
+FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG);
+void RTC_ClearFlag(uint16_t RTC_FLAG);
+ITStatus RTC_GetITStatus(uint16_t RTC_IT);
+void RTC_ClearITPendingBit(uint16_t RTC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_RTC_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_sdio.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_sdio.h
new file mode 100644
index 00000000..40cfdedc
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_sdio.h
@@ -0,0 +1,531 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_sdio.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the SDIO firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_SDIO_H
+#define __STM32F10x_SDIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup SDIO
+ * @{
+ */
+
+/** @defgroup SDIO_Exported_Types
+ * @{
+ */
+
+typedef struct
+{
+ uint32_t SDIO_ClockEdge; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SDIO_Clock_Edge */
+
+ uint32_t SDIO_ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is
+ enabled or disabled.
+ This parameter can be a value of @ref SDIO_Clock_Bypass */
+
+ uint32_t SDIO_ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or
+ disabled when the bus is idle.
+ This parameter can be a value of @ref SDIO_Clock_Power_Save */
+
+ uint32_t SDIO_BusWide; /*!< Specifies the SDIO bus width.
+ This parameter can be a value of @ref SDIO_Bus_Wide */
+
+ uint32_t SDIO_HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled.
+ This parameter can be a value of @ref SDIO_Hardware_Flow_Control */
+
+ uint8_t SDIO_ClockDiv; /*!< Specifies the clock frequency of the SDIO controller.
+ This parameter can be a value between 0x00 and 0xFF. */
+
+} SDIO_InitTypeDef;
+
+typedef struct
+{
+ uint32_t SDIO_Argument; /*!< Specifies the SDIO command argument which is sent
+ to a card as part of a command message. If a command
+ contains an argument, it must be loaded into this register
+ before writing the command to the command register */
+
+ uint32_t SDIO_CmdIndex; /*!< Specifies the SDIO command index. It must be lower than 0x40. */
+
+ uint32_t SDIO_Response; /*!< Specifies the SDIO response type.
+ This parameter can be a value of @ref SDIO_Response_Type */
+
+ uint32_t SDIO_Wait; /*!< Specifies whether SDIO wait-for-interrupt request is enabled or disabled.
+ This parameter can be a value of @ref SDIO_Wait_Interrupt_State */
+
+ uint32_t SDIO_CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM)
+ is enabled or disabled.
+ This parameter can be a value of @ref SDIO_CPSM_State */
+} SDIO_CmdInitTypeDef;
+
+typedef struct
+{
+ uint32_t SDIO_DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */
+
+ uint32_t SDIO_DataLength; /*!< Specifies the number of data bytes to be transferred. */
+
+ uint32_t SDIO_DataBlockSize; /*!< Specifies the data block size for block transfer.
+ This parameter can be a value of @ref SDIO_Data_Block_Size */
+
+ uint32_t SDIO_TransferDir; /*!< Specifies the data transfer direction, whether the transfer
+ is a read or write.
+ This parameter can be a value of @ref SDIO_Transfer_Direction */
+
+ uint32_t SDIO_TransferMode; /*!< Specifies whether data transfer is in stream or block mode.
+ This parameter can be a value of @ref SDIO_Transfer_Type */
+
+ uint32_t SDIO_DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM)
+ is enabled or disabled.
+ This parameter can be a value of @ref SDIO_DPSM_State */
+} SDIO_DataInitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Exported_Constants
+ * @{
+ */
+
+/** @defgroup SDIO_Clock_Edge
+ * @{
+ */
+
+#define SDIO_ClockEdge_Rising ((uint32_t)0x00000000)
+#define SDIO_ClockEdge_Falling ((uint32_t)0x00002000)
+#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \
+ ((EDGE) == SDIO_ClockEdge_Falling))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Bypass
+ * @{
+ */
+
+#define SDIO_ClockBypass_Disable ((uint32_t)0x00000000)
+#define SDIO_ClockBypass_Enable ((uint32_t)0x00000400)
+#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \
+ ((BYPASS) == SDIO_ClockBypass_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Power_Save
+ * @{
+ */
+
+#define SDIO_ClockPowerSave_Disable ((uint32_t)0x00000000)
+#define SDIO_ClockPowerSave_Enable ((uint32_t)0x00000200)
+#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \
+ ((SAVE) == SDIO_ClockPowerSave_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Bus_Wide
+ * @{
+ */
+
+#define SDIO_BusWide_1b ((uint32_t)0x00000000)
+#define SDIO_BusWide_4b ((uint32_t)0x00000800)
+#define SDIO_BusWide_8b ((uint32_t)0x00001000)
+#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \
+ ((WIDE) == SDIO_BusWide_8b))
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Hardware_Flow_Control
+ * @{
+ */
+
+#define SDIO_HardwareFlowControl_Disable ((uint32_t)0x00000000)
+#define SDIO_HardwareFlowControl_Enable ((uint32_t)0x00004000)
+#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \
+ ((CONTROL) == SDIO_HardwareFlowControl_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Power_State
+ * @{
+ */
+
+#define SDIO_PowerState_OFF ((uint32_t)0x00000000)
+#define SDIO_PowerState_ON ((uint32_t)0x00000003)
+#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON))
+/**
+ * @}
+ */
+
+
+/** @defgroup SDIO_Interrupt_sources
+ * @{
+ */
+
+#define SDIO_IT_CCRCFAIL ((uint32_t)0x00000001)
+#define SDIO_IT_DCRCFAIL ((uint32_t)0x00000002)
+#define SDIO_IT_CTIMEOUT ((uint32_t)0x00000004)
+#define SDIO_IT_DTIMEOUT ((uint32_t)0x00000008)
+#define SDIO_IT_TXUNDERR ((uint32_t)0x00000010)
+#define SDIO_IT_RXOVERR ((uint32_t)0x00000020)
+#define SDIO_IT_CMDREND ((uint32_t)0x00000040)
+#define SDIO_IT_CMDSENT ((uint32_t)0x00000080)
+#define SDIO_IT_DATAEND ((uint32_t)0x00000100)
+#define SDIO_IT_STBITERR ((uint32_t)0x00000200)
+#define SDIO_IT_DBCKEND ((uint32_t)0x00000400)
+#define SDIO_IT_CMDACT ((uint32_t)0x00000800)
+#define SDIO_IT_TXACT ((uint32_t)0x00001000)
+#define SDIO_IT_RXACT ((uint32_t)0x00002000)
+#define SDIO_IT_TXFIFOHE ((uint32_t)0x00004000)
+#define SDIO_IT_RXFIFOHF ((uint32_t)0x00008000)
+#define SDIO_IT_TXFIFOF ((uint32_t)0x00010000)
+#define SDIO_IT_RXFIFOF ((uint32_t)0x00020000)
+#define SDIO_IT_TXFIFOE ((uint32_t)0x00040000)
+#define SDIO_IT_RXFIFOE ((uint32_t)0x00080000)
+#define SDIO_IT_TXDAVL ((uint32_t)0x00100000)
+#define SDIO_IT_RXDAVL ((uint32_t)0x00200000)
+#define SDIO_IT_SDIOIT ((uint32_t)0x00400000)
+#define SDIO_IT_CEATAEND ((uint32_t)0x00800000)
+#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Command_Index
+ * @{
+ */
+
+#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Response_Type
+ * @{
+ */
+
+#define SDIO_Response_No ((uint32_t)0x00000000)
+#define SDIO_Response_Short ((uint32_t)0x00000040)
+#define SDIO_Response_Long ((uint32_t)0x000000C0)
+#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \
+ ((RESPONSE) == SDIO_Response_Short) || \
+ ((RESPONSE) == SDIO_Response_Long))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Wait_Interrupt_State
+ * @{
+ */
+
+#define SDIO_Wait_No ((uint32_t)0x00000000) /*!< SDIO No Wait, TimeOut is enabled */
+#define SDIO_Wait_IT ((uint32_t)0x00000100) /*!< SDIO Wait Interrupt Request */
+#define SDIO_Wait_Pend ((uint32_t)0x00000200) /*!< SDIO Wait End of transfer */
+#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \
+ ((WAIT) == SDIO_Wait_Pend))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_CPSM_State
+ * @{
+ */
+
+#define SDIO_CPSM_Disable ((uint32_t)0x00000000)
+#define SDIO_CPSM_Enable ((uint32_t)0x00000400)
+#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Response_Registers
+ * @{
+ */
+
+#define SDIO_RESP1 ((uint32_t)0x00000000)
+#define SDIO_RESP2 ((uint32_t)0x00000004)
+#define SDIO_RESP3 ((uint32_t)0x00000008)
+#define SDIO_RESP4 ((uint32_t)0x0000000C)
+#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \
+ ((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Data_Length
+ * @{
+ */
+
+#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Data_Block_Size
+ * @{
+ */
+
+#define SDIO_DataBlockSize_1b ((uint32_t)0x00000000)
+#define SDIO_DataBlockSize_2b ((uint32_t)0x00000010)
+#define SDIO_DataBlockSize_4b ((uint32_t)0x00000020)
+#define SDIO_DataBlockSize_8b ((uint32_t)0x00000030)
+#define SDIO_DataBlockSize_16b ((uint32_t)0x00000040)
+#define SDIO_DataBlockSize_32b ((uint32_t)0x00000050)
+#define SDIO_DataBlockSize_64b ((uint32_t)0x00000060)
+#define SDIO_DataBlockSize_128b ((uint32_t)0x00000070)
+#define SDIO_DataBlockSize_256b ((uint32_t)0x00000080)
+#define SDIO_DataBlockSize_512b ((uint32_t)0x00000090)
+#define SDIO_DataBlockSize_1024b ((uint32_t)0x000000A0)
+#define SDIO_DataBlockSize_2048b ((uint32_t)0x000000B0)
+#define SDIO_DataBlockSize_4096b ((uint32_t)0x000000C0)
+#define SDIO_DataBlockSize_8192b ((uint32_t)0x000000D0)
+#define SDIO_DataBlockSize_16384b ((uint32_t)0x000000E0)
+#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \
+ ((SIZE) == SDIO_DataBlockSize_2b) || \
+ ((SIZE) == SDIO_DataBlockSize_4b) || \
+ ((SIZE) == SDIO_DataBlockSize_8b) || \
+ ((SIZE) == SDIO_DataBlockSize_16b) || \
+ ((SIZE) == SDIO_DataBlockSize_32b) || \
+ ((SIZE) == SDIO_DataBlockSize_64b) || \
+ ((SIZE) == SDIO_DataBlockSize_128b) || \
+ ((SIZE) == SDIO_DataBlockSize_256b) || \
+ ((SIZE) == SDIO_DataBlockSize_512b) || \
+ ((SIZE) == SDIO_DataBlockSize_1024b) || \
+ ((SIZE) == SDIO_DataBlockSize_2048b) || \
+ ((SIZE) == SDIO_DataBlockSize_4096b) || \
+ ((SIZE) == SDIO_DataBlockSize_8192b) || \
+ ((SIZE) == SDIO_DataBlockSize_16384b))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Transfer_Direction
+ * @{
+ */
+
+#define SDIO_TransferDir_ToCard ((uint32_t)0x00000000)
+#define SDIO_TransferDir_ToSDIO ((uint32_t)0x00000002)
+#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \
+ ((DIR) == SDIO_TransferDir_ToSDIO))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Transfer_Type
+ * @{
+ */
+
+#define SDIO_TransferMode_Block ((uint32_t)0x00000000)
+#define SDIO_TransferMode_Stream ((uint32_t)0x00000004)
+#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \
+ ((MODE) == SDIO_TransferMode_Block))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_DPSM_State
+ * @{
+ */
+
+#define SDIO_DPSM_Disable ((uint32_t)0x00000000)
+#define SDIO_DPSM_Enable ((uint32_t)0x00000001)
+#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Flags
+ * @{
+ */
+
+#define SDIO_FLAG_CCRCFAIL ((uint32_t)0x00000001)
+#define SDIO_FLAG_DCRCFAIL ((uint32_t)0x00000002)
+#define SDIO_FLAG_CTIMEOUT ((uint32_t)0x00000004)
+#define SDIO_FLAG_DTIMEOUT ((uint32_t)0x00000008)
+#define SDIO_FLAG_TXUNDERR ((uint32_t)0x00000010)
+#define SDIO_FLAG_RXOVERR ((uint32_t)0x00000020)
+#define SDIO_FLAG_CMDREND ((uint32_t)0x00000040)
+#define SDIO_FLAG_CMDSENT ((uint32_t)0x00000080)
+#define SDIO_FLAG_DATAEND ((uint32_t)0x00000100)
+#define SDIO_FLAG_STBITERR ((uint32_t)0x00000200)
+#define SDIO_FLAG_DBCKEND ((uint32_t)0x00000400)
+#define SDIO_FLAG_CMDACT ((uint32_t)0x00000800)
+#define SDIO_FLAG_TXACT ((uint32_t)0x00001000)
+#define SDIO_FLAG_RXACT ((uint32_t)0x00002000)
+#define SDIO_FLAG_TXFIFOHE ((uint32_t)0x00004000)
+#define SDIO_FLAG_RXFIFOHF ((uint32_t)0x00008000)
+#define SDIO_FLAG_TXFIFOF ((uint32_t)0x00010000)
+#define SDIO_FLAG_RXFIFOF ((uint32_t)0x00020000)
+#define SDIO_FLAG_TXFIFOE ((uint32_t)0x00040000)
+#define SDIO_FLAG_RXFIFOE ((uint32_t)0x00080000)
+#define SDIO_FLAG_TXDAVL ((uint32_t)0x00100000)
+#define SDIO_FLAG_RXDAVL ((uint32_t)0x00200000)
+#define SDIO_FLAG_SDIOIT ((uint32_t)0x00400000)
+#define SDIO_FLAG_CEATAEND ((uint32_t)0x00800000)
+#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \
+ ((FLAG) == SDIO_FLAG_DCRCFAIL) || \
+ ((FLAG) == SDIO_FLAG_CTIMEOUT) || \
+ ((FLAG) == SDIO_FLAG_DTIMEOUT) || \
+ ((FLAG) == SDIO_FLAG_TXUNDERR) || \
+ ((FLAG) == SDIO_FLAG_RXOVERR) || \
+ ((FLAG) == SDIO_FLAG_CMDREND) || \
+ ((FLAG) == SDIO_FLAG_CMDSENT) || \
+ ((FLAG) == SDIO_FLAG_DATAEND) || \
+ ((FLAG) == SDIO_FLAG_STBITERR) || \
+ ((FLAG) == SDIO_FLAG_DBCKEND) || \
+ ((FLAG) == SDIO_FLAG_CMDACT) || \
+ ((FLAG) == SDIO_FLAG_TXACT) || \
+ ((FLAG) == SDIO_FLAG_RXACT) || \
+ ((FLAG) == SDIO_FLAG_TXFIFOHE) || \
+ ((FLAG) == SDIO_FLAG_RXFIFOHF) || \
+ ((FLAG) == SDIO_FLAG_TXFIFOF) || \
+ ((FLAG) == SDIO_FLAG_RXFIFOF) || \
+ ((FLAG) == SDIO_FLAG_TXFIFOE) || \
+ ((FLAG) == SDIO_FLAG_RXFIFOE) || \
+ ((FLAG) == SDIO_FLAG_TXDAVL) || \
+ ((FLAG) == SDIO_FLAG_RXDAVL) || \
+ ((FLAG) == SDIO_FLAG_SDIOIT) || \
+ ((FLAG) == SDIO_FLAG_CEATAEND))
+
+#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00))
+
+#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \
+ ((IT) == SDIO_IT_DCRCFAIL) || \
+ ((IT) == SDIO_IT_CTIMEOUT) || \
+ ((IT) == SDIO_IT_DTIMEOUT) || \
+ ((IT) == SDIO_IT_TXUNDERR) || \
+ ((IT) == SDIO_IT_RXOVERR) || \
+ ((IT) == SDIO_IT_CMDREND) || \
+ ((IT) == SDIO_IT_CMDSENT) || \
+ ((IT) == SDIO_IT_DATAEND) || \
+ ((IT) == SDIO_IT_STBITERR) || \
+ ((IT) == SDIO_IT_DBCKEND) || \
+ ((IT) == SDIO_IT_CMDACT) || \
+ ((IT) == SDIO_IT_TXACT) || \
+ ((IT) == SDIO_IT_RXACT) || \
+ ((IT) == SDIO_IT_TXFIFOHE) || \
+ ((IT) == SDIO_IT_RXFIFOHF) || \
+ ((IT) == SDIO_IT_TXFIFOF) || \
+ ((IT) == SDIO_IT_RXFIFOF) || \
+ ((IT) == SDIO_IT_TXFIFOE) || \
+ ((IT) == SDIO_IT_RXFIFOE) || \
+ ((IT) == SDIO_IT_TXDAVL) || \
+ ((IT) == SDIO_IT_RXDAVL) || \
+ ((IT) == SDIO_IT_SDIOIT) || \
+ ((IT) == SDIO_IT_CEATAEND))
+
+#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00))
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Read_Wait_Mode
+ * @{
+ */
+
+#define SDIO_ReadWaitMode_CLK ((uint32_t)0x00000001)
+#define SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000000)
+#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \
+ ((MODE) == SDIO_ReadWaitMode_DATA2))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Exported_Functions
+ * @{
+ */
+
+void SDIO_DeInit(void);
+void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct);
+void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct);
+void SDIO_ClockCmd(FunctionalState NewState);
+void SDIO_SetPowerState(uint32_t SDIO_PowerState);
+uint32_t SDIO_GetPowerState(void);
+void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState);
+void SDIO_DMACmd(FunctionalState NewState);
+void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct);
+void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct);
+uint8_t SDIO_GetCommandResponse(void);
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP);
+void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct);
+void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct);
+uint32_t SDIO_GetDataCounter(void);
+uint32_t SDIO_ReadData(void);
+void SDIO_WriteData(uint32_t Data);
+uint32_t SDIO_GetFIFOCount(void);
+void SDIO_StartSDIOReadWait(FunctionalState NewState);
+void SDIO_StopSDIOReadWait(FunctionalState NewState);
+void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode);
+void SDIO_SetSDIOOperation(FunctionalState NewState);
+void SDIO_SendSDIOSuspendCmd(FunctionalState NewState);
+void SDIO_CommandCompletionCmd(FunctionalState NewState);
+void SDIO_CEATAITCmd(FunctionalState NewState);
+void SDIO_SendCEATACmd(FunctionalState NewState);
+FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG);
+void SDIO_ClearFlag(uint32_t SDIO_FLAG);
+ITStatus SDIO_GetITStatus(uint32_t SDIO_IT);
+void SDIO_ClearITPendingBit(uint32_t SDIO_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_SDIO_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_spi.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_spi.h
new file mode 100644
index 00000000..6056c4c6
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_spi.h
@@ -0,0 +1,487 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_spi.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the SPI firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_SPI_H
+#define __STM32F10x_SPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup SPI
+ * @{
+ */
+
+/** @defgroup SPI_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief SPI Init structure definition
+ */
+
+typedef struct
+{
+ uint16_t SPI_Direction; /*!< Specifies the SPI unidirectional or bidirectional data mode.
+ This parameter can be a value of @ref SPI_data_direction */
+
+ uint16_t SPI_Mode; /*!< Specifies the SPI operating mode.
+ This parameter can be a value of @ref SPI_mode */
+
+ uint16_t SPI_DataSize; /*!< Specifies the SPI data size.
+ This parameter can be a value of @ref SPI_data_size */
+
+ uint16_t SPI_CPOL; /*!< Specifies the serial clock steady state.
+ This parameter can be a value of @ref SPI_Clock_Polarity */
+
+ uint16_t SPI_CPHA; /*!< Specifies the clock active edge for the bit capture.
+ This parameter can be a value of @ref SPI_Clock_Phase */
+
+ uint16_t SPI_NSS; /*!< Specifies whether the NSS signal is managed by
+ hardware (NSS pin) or by software using the SSI bit.
+ This parameter can be a value of @ref SPI_Slave_Select_management */
+
+ uint16_t SPI_BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
+ used to configure the transmit and receive SCK clock.
+ This parameter can be a value of @ref SPI_BaudRate_Prescaler.
+ @note The communication clock is derived from the master
+ clock. The slave clock does not need to be set. */
+
+ uint16_t SPI_FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+ uint16_t SPI_CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. */
+}SPI_InitTypeDef;
+
+/**
+ * @brief I2S Init structure definition
+ */
+
+typedef struct
+{
+
+ uint16_t I2S_Mode; /*!< Specifies the I2S operating mode.
+ This parameter can be a value of @ref I2S_Mode */
+
+ uint16_t I2S_Standard; /*!< Specifies the standard used for the I2S communication.
+ This parameter can be a value of @ref I2S_Standard */
+
+ uint16_t I2S_DataFormat; /*!< Specifies the data format for the I2S communication.
+ This parameter can be a value of @ref I2S_Data_Format */
+
+ uint16_t I2S_MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
+ This parameter can be a value of @ref I2S_MCLK_Output */
+
+ uint32_t I2S_AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
+ This parameter can be a value of @ref I2S_Audio_Frequency */
+
+ uint16_t I2S_CPOL; /*!< Specifies the idle state of the I2S clock.
+ This parameter can be a value of @ref I2S_Clock_Polarity */
+}I2S_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Exported_Constants
+ * @{
+ */
+
+#define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI1) || \
+ ((PERIPH) == SPI2) || \
+ ((PERIPH) == SPI3))
+
+#define IS_SPI_23_PERIPH(PERIPH) (((PERIPH) == SPI2) || \
+ ((PERIPH) == SPI3))
+
+/** @defgroup SPI_data_direction
+ * @{
+ */
+
+#define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000)
+#define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400)
+#define SPI_Direction_1Line_Rx ((uint16_t)0x8000)
+#define SPI_Direction_1Line_Tx ((uint16_t)0xC000)
+#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \
+ ((MODE) == SPI_Direction_2Lines_RxOnly) || \
+ ((MODE) == SPI_Direction_1Line_Rx) || \
+ ((MODE) == SPI_Direction_1Line_Tx))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_mode
+ * @{
+ */
+
+#define SPI_Mode_Master ((uint16_t)0x0104)
+#define SPI_Mode_Slave ((uint16_t)0x0000)
+#define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \
+ ((MODE) == SPI_Mode_Slave))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_data_size
+ * @{
+ */
+
+#define SPI_DataSize_16b ((uint16_t)0x0800)
+#define SPI_DataSize_8b ((uint16_t)0x0000)
+#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DataSize_16b) || \
+ ((DATASIZE) == SPI_DataSize_8b))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Polarity
+ * @{
+ */
+
+#define SPI_CPOL_Low ((uint16_t)0x0000)
+#define SPI_CPOL_High ((uint16_t)0x0002)
+#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \
+ ((CPOL) == SPI_CPOL_High))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Phase
+ * @{
+ */
+
+#define SPI_CPHA_1Edge ((uint16_t)0x0000)
+#define SPI_CPHA_2Edge ((uint16_t)0x0001)
+#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \
+ ((CPHA) == SPI_CPHA_2Edge))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Slave_Select_management
+ * @{
+ */
+
+#define SPI_NSS_Soft ((uint16_t)0x0200)
+#define SPI_NSS_Hard ((uint16_t)0x0000)
+#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \
+ ((NSS) == SPI_NSS_Hard))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_BaudRate_Prescaler
+ * @{
+ */
+
+#define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000)
+#define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008)
+#define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010)
+#define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018)
+#define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020)
+#define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028)
+#define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030)
+#define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038)
+#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_4) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_8) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_16) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_32) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_64) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_128) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_256))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_MSB_LSB_transmission
+ * @{
+ */
+
+#define SPI_FirstBit_MSB ((uint16_t)0x0000)
+#define SPI_FirstBit_LSB ((uint16_t)0x0080)
+#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \
+ ((BIT) == SPI_FirstBit_LSB))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Mode
+ * @{
+ */
+
+#define I2S_Mode_SlaveTx ((uint16_t)0x0000)
+#define I2S_Mode_SlaveRx ((uint16_t)0x0100)
+#define I2S_Mode_MasterTx ((uint16_t)0x0200)
+#define I2S_Mode_MasterRx ((uint16_t)0x0300)
+#define IS_I2S_MODE(MODE) (((MODE) == I2S_Mode_SlaveTx) || \
+ ((MODE) == I2S_Mode_SlaveRx) || \
+ ((MODE) == I2S_Mode_MasterTx) || \
+ ((MODE) == I2S_Mode_MasterRx) )
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Standard
+ * @{
+ */
+
+#define I2S_Standard_Phillips ((uint16_t)0x0000)
+#define I2S_Standard_MSB ((uint16_t)0x0010)
+#define I2S_Standard_LSB ((uint16_t)0x0020)
+#define I2S_Standard_PCMShort ((uint16_t)0x0030)
+#define I2S_Standard_PCMLong ((uint16_t)0x00B0)
+#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_Standard_Phillips) || \
+ ((STANDARD) == I2S_Standard_MSB) || \
+ ((STANDARD) == I2S_Standard_LSB) || \
+ ((STANDARD) == I2S_Standard_PCMShort) || \
+ ((STANDARD) == I2S_Standard_PCMLong))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Data_Format
+ * @{
+ */
+
+#define I2S_DataFormat_16b ((uint16_t)0x0000)
+#define I2S_DataFormat_16bextended ((uint16_t)0x0001)
+#define I2S_DataFormat_24b ((uint16_t)0x0003)
+#define I2S_DataFormat_32b ((uint16_t)0x0005)
+#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DataFormat_16b) || \
+ ((FORMAT) == I2S_DataFormat_16bextended) || \
+ ((FORMAT) == I2S_DataFormat_24b) || \
+ ((FORMAT) == I2S_DataFormat_32b))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_MCLK_Output
+ * @{
+ */
+
+#define I2S_MCLKOutput_Enable ((uint16_t)0x0200)
+#define I2S_MCLKOutput_Disable ((uint16_t)0x0000)
+#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOutput_Enable) || \
+ ((OUTPUT) == I2S_MCLKOutput_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Audio_Frequency
+ * @{
+ */
+
+#define I2S_AudioFreq_192k ((uint32_t)192000)
+#define I2S_AudioFreq_96k ((uint32_t)96000)
+#define I2S_AudioFreq_48k ((uint32_t)48000)
+#define I2S_AudioFreq_44k ((uint32_t)44100)
+#define I2S_AudioFreq_32k ((uint32_t)32000)
+#define I2S_AudioFreq_22k ((uint32_t)22050)
+#define I2S_AudioFreq_16k ((uint32_t)16000)
+#define I2S_AudioFreq_11k ((uint32_t)11025)
+#define I2S_AudioFreq_8k ((uint32_t)8000)
+#define I2S_AudioFreq_Default ((uint32_t)2)
+
+#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AudioFreq_8k) && \
+ ((FREQ) <= I2S_AudioFreq_192k)) || \
+ ((FREQ) == I2S_AudioFreq_Default))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Clock_Polarity
+ * @{
+ */
+
+#define I2S_CPOL_Low ((uint16_t)0x0000)
+#define I2S_CPOL_High ((uint16_t)0x0008)
+#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_Low) || \
+ ((CPOL) == I2S_CPOL_High))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_I2S_DMA_transfer_requests
+ * @{
+ */
+
+#define SPI_I2S_DMAReq_Tx ((uint16_t)0x0002)
+#define SPI_I2S_DMAReq_Rx ((uint16_t)0x0001)
+#define IS_SPI_I2S_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFFFC) == 0x00) && ((DMAREQ) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_NSS_internal_software_management
+ * @{
+ */
+
+#define SPI_NSSInternalSoft_Set ((uint16_t)0x0100)
+#define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF)
+#define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \
+ ((INTERNAL) == SPI_NSSInternalSoft_Reset))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_Transmit_Receive
+ * @{
+ */
+
+#define SPI_CRC_Tx ((uint8_t)0x00)
+#define SPI_CRC_Rx ((uint8_t)0x01)
+#define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_direction_transmit_receive
+ * @{
+ */
+
+#define SPI_Direction_Rx ((uint16_t)0xBFFF)
+#define SPI_Direction_Tx ((uint16_t)0x4000)
+#define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \
+ ((DIRECTION) == SPI_Direction_Tx))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_I2S_interrupts_definition
+ * @{
+ */
+
+#define SPI_I2S_IT_TXE ((uint8_t)0x71)
+#define SPI_I2S_IT_RXNE ((uint8_t)0x60)
+#define SPI_I2S_IT_ERR ((uint8_t)0x50)
+#define IS_SPI_I2S_CONFIG_IT(IT) (((IT) == SPI_I2S_IT_TXE) || \
+ ((IT) == SPI_I2S_IT_RXNE) || \
+ ((IT) == SPI_I2S_IT_ERR))
+#define SPI_I2S_IT_OVR ((uint8_t)0x56)
+#define SPI_IT_MODF ((uint8_t)0x55)
+#define SPI_IT_CRCERR ((uint8_t)0x54)
+#define I2S_IT_UDR ((uint8_t)0x53)
+#define IS_SPI_I2S_CLEAR_IT(IT) (((IT) == SPI_IT_CRCERR))
+#define IS_SPI_I2S_GET_IT(IT) (((IT) == SPI_I2S_IT_RXNE) || ((IT) == SPI_I2S_IT_TXE) || \
+ ((IT) == I2S_IT_UDR) || ((IT) == SPI_IT_CRCERR) || \
+ ((IT) == SPI_IT_MODF) || ((IT) == SPI_I2S_IT_OVR))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_I2S_flags_definition
+ * @{
+ */
+
+#define SPI_I2S_FLAG_RXNE ((uint16_t)0x0001)
+#define SPI_I2S_FLAG_TXE ((uint16_t)0x0002)
+#define I2S_FLAG_CHSIDE ((uint16_t)0x0004)
+#define I2S_FLAG_UDR ((uint16_t)0x0008)
+#define SPI_FLAG_CRCERR ((uint16_t)0x0010)
+#define SPI_FLAG_MODF ((uint16_t)0x0020)
+#define SPI_I2S_FLAG_OVR ((uint16_t)0x0040)
+#define SPI_I2S_FLAG_BSY ((uint16_t)0x0080)
+#define IS_SPI_I2S_CLEAR_FLAG(FLAG) (((FLAG) == SPI_FLAG_CRCERR))
+#define IS_SPI_I2S_GET_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_BSY) || ((FLAG) == SPI_I2S_FLAG_OVR) || \
+ ((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \
+ ((FLAG) == I2S_FLAG_UDR) || ((FLAG) == I2S_FLAG_CHSIDE) || \
+ ((FLAG) == SPI_I2S_FLAG_TXE) || ((FLAG) == SPI_I2S_FLAG_RXNE))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_polynomial
+ * @{
+ */
+
+#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Exported_Functions
+ * @{
+ */
+
+void SPI_I2S_DeInit(SPI_TypeDef* SPIx);
+void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct);
+void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct);
+void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct);
+void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct);
+void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState);
+void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState);
+void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState);
+void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState);
+void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data);
+uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx);
+void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft);
+void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState);
+void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize);
+void SPI_TransmitCRC(SPI_TypeDef* SPIx);
+void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState);
+uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC);
+uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx);
+void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction);
+FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG);
+void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG);
+ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT);
+void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_SPI_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_tim.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_tim.h
new file mode 100644
index 00000000..cd7ac3e9
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_tim.h
@@ -0,0 +1,1164 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_tim.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the TIM firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_TIM_H
+#define __STM32F10x_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup TIM
+ * @{
+ */
+
+/** @defgroup TIM_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief TIM Time Base Init structure definition
+ * @note This structure is used with all TIMx except for TIM6 and TIM7.
+ */
+
+typedef struct
+{
+ uint16_t TIM_Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between 0x0000 and 0xFFFF */
+
+ uint16_t TIM_CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_Counter_Mode */
+
+ uint16_t TIM_Period; /*!< Specifies the period value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter must be a number between 0x0000 and 0xFFFF. */
+
+ uint16_t TIM_ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_Clock_Division_CKD */
+
+ uint8_t TIM_RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ This parameter must be a number between 0x00 and 0xFF.
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_TimeBaseInitTypeDef;
+
+/**
+ * @brief TIM Output Compare Init structure definition
+ */
+
+typedef struct
+{
+ uint16_t TIM_OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint16_t TIM_OutputState; /*!< Specifies the TIM Output Compare state.
+ This parameter can be a value of @ref TIM_Output_Compare_state */
+
+ uint16_t TIM_OutputNState; /*!< Specifies the TIM complementary Output Compare state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_state
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint16_t TIM_Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between 0x0000 and 0xFFFF */
+
+ uint16_t TIM_OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint16_t TIM_OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint16_t TIM_OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint16_t TIM_OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OCInitTypeDef;
+
+/**
+ * @brief TIM Input Capture Init structure definition
+ */
+
+typedef struct
+{
+
+ uint16_t TIM_Channel; /*!< Specifies the TIM channel.
+ This parameter can be a value of @ref TIM_Channel */
+
+ uint16_t TIM_ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint16_t TIM_ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint16_t TIM_ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint16_t TIM_ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between 0x0 and 0xF */
+} TIM_ICInitTypeDef;
+
+/**
+ * @brief BDTR structure definition
+ * @note This structure is used only with TIM1 and TIM8.
+ */
+
+typedef struct
+{
+
+ uint16_t TIM_OSSRState; /*!< Specifies the Off-State selection used in Run mode.
+ This parameter can be a value of @ref OSSR_Off_State_Selection_for_Run_mode_state */
+
+ uint16_t TIM_OSSIState; /*!< Specifies the Off-State used in Idle state.
+ This parameter can be a value of @ref OSSI_Off_State_Selection_for_Idle_mode_state */
+
+ uint16_t TIM_LOCKLevel; /*!< Specifies the LOCK level parameters.
+ This parameter can be a value of @ref Lock_level */
+
+ uint16_t TIM_DeadTime; /*!< Specifies the delay time between the switching-off and the
+ switching-on of the outputs.
+ This parameter can be a number between 0x00 and 0xFF */
+
+ uint16_t TIM_Break; /*!< Specifies whether the TIM Break input is enabled or not.
+ This parameter can be a value of @ref Break_Input_enable_disable */
+
+ uint16_t TIM_BreakPolarity; /*!< Specifies the TIM Break Input pin polarity.
+ This parameter can be a value of @ref Break_Polarity */
+
+ uint16_t TIM_AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not.
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BDTRInitTypeDef;
+
+/** @defgroup TIM_Exported_constants
+ * @{
+ */
+
+#define IS_TIM_ALL_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM6) || \
+ ((PERIPH) == TIM7) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM9) || \
+ ((PERIPH) == TIM10)|| \
+ ((PERIPH) == TIM11)|| \
+ ((PERIPH) == TIM12)|| \
+ ((PERIPH) == TIM13)|| \
+ ((PERIPH) == TIM14)|| \
+ ((PERIPH) == TIM15)|| \
+ ((PERIPH) == TIM16)|| \
+ ((PERIPH) == TIM17))
+
+/* LIST1: TIM 1 and 8 */
+#define IS_TIM_LIST1_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM8))
+
+/* LIST2: TIM 1, 8, 15 16 and 17 */
+#define IS_TIM_LIST2_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM15)|| \
+ ((PERIPH) == TIM16)|| \
+ ((PERIPH) == TIM17))
+
+/* LIST3: TIM 1, 2, 3, 4, 5 and 8 */
+#define IS_TIM_LIST3_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM8))
+
+/* LIST4: TIM 1, 2, 3, 4, 5, 8, 15, 16 and 17 */
+#define IS_TIM_LIST4_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM15)|| \
+ ((PERIPH) == TIM16)|| \
+ ((PERIPH) == TIM17))
+
+/* LIST5: TIM 1, 2, 3, 4, 5, 8 and 15 */
+#define IS_TIM_LIST5_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM15))
+
+/* LIST6: TIM 1, 2, 3, 4, 5, 8, 9, 12 and 15 */
+#define IS_TIM_LIST6_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM9) || \
+ ((PERIPH) == TIM12)|| \
+ ((PERIPH) == TIM15))
+
+/* LIST7: TIM 1, 2, 3, 4, 5, 6, 7, 8, 9, 12 and 15 */
+#define IS_TIM_LIST7_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM6) || \
+ ((PERIPH) == TIM7) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM9) || \
+ ((PERIPH) == TIM12)|| \
+ ((PERIPH) == TIM15))
+
+/* LIST8: TIM 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13, 14, 15, 16 and 17 */
+#define IS_TIM_LIST8_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM9) || \
+ ((PERIPH) == TIM10)|| \
+ ((PERIPH) == TIM11)|| \
+ ((PERIPH) == TIM12)|| \
+ ((PERIPH) == TIM13)|| \
+ ((PERIPH) == TIM14)|| \
+ ((PERIPH) == TIM15)|| \
+ ((PERIPH) == TIM16)|| \
+ ((PERIPH) == TIM17))
+
+/* LIST9: TIM 1, 2, 3, 4, 5, 6, 7, 8, 15, 16, and 17 */
+#define IS_TIM_LIST9_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM6) || \
+ ((PERIPH) == TIM7) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM15)|| \
+ ((PERIPH) == TIM16)|| \
+ ((PERIPH) == TIM17))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_and_PWM_modes
+ * @{
+ */
+
+#define TIM_OCMode_Timing ((uint16_t)0x0000)
+#define TIM_OCMode_Active ((uint16_t)0x0010)
+#define TIM_OCMode_Inactive ((uint16_t)0x0020)
+#define TIM_OCMode_Toggle ((uint16_t)0x0030)
+#define TIM_OCMode_PWM1 ((uint16_t)0x0060)
+#define TIM_OCMode_PWM2 ((uint16_t)0x0070)
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMode_Timing) || \
+ ((MODE) == TIM_OCMode_Active) || \
+ ((MODE) == TIM_OCMode_Inactive) || \
+ ((MODE) == TIM_OCMode_Toggle)|| \
+ ((MODE) == TIM_OCMode_PWM1) || \
+ ((MODE) == TIM_OCMode_PWM2))
+#define IS_TIM_OCM(MODE) (((MODE) == TIM_OCMode_Timing) || \
+ ((MODE) == TIM_OCMode_Active) || \
+ ((MODE) == TIM_OCMode_Inactive) || \
+ ((MODE) == TIM_OCMode_Toggle)|| \
+ ((MODE) == TIM_OCMode_PWM1) || \
+ ((MODE) == TIM_OCMode_PWM2) || \
+ ((MODE) == TIM_ForcedAction_Active) || \
+ ((MODE) == TIM_ForcedAction_InActive))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_One_Pulse_Mode
+ * @{
+ */
+
+#define TIM_OPMode_Single ((uint16_t)0x0008)
+#define TIM_OPMode_Repetitive ((uint16_t)0x0000)
+#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMode_Single) || \
+ ((MODE) == TIM_OPMode_Repetitive))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Channel
+ * @{
+ */
+
+#define TIM_Channel_1 ((uint16_t)0x0000)
+#define TIM_Channel_2 ((uint16_t)0x0004)
+#define TIM_Channel_3 ((uint16_t)0x0008)
+#define TIM_Channel_4 ((uint16_t)0x000C)
+#define IS_TIM_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \
+ ((CHANNEL) == TIM_Channel_2) || \
+ ((CHANNEL) == TIM_Channel_3) || \
+ ((CHANNEL) == TIM_Channel_4))
+#define IS_TIM_PWMI_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \
+ ((CHANNEL) == TIM_Channel_2))
+#define IS_TIM_COMPLEMENTARY_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \
+ ((CHANNEL) == TIM_Channel_2) || \
+ ((CHANNEL) == TIM_Channel_3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Division_CKD
+ * @{
+ */
+
+#define TIM_CKD_DIV1 ((uint16_t)0x0000)
+#define TIM_CKD_DIV2 ((uint16_t)0x0100)
+#define TIM_CKD_DIV4 ((uint16_t)0x0200)
+#define IS_TIM_CKD_DIV(DIV) (((DIV) == TIM_CKD_DIV1) || \
+ ((DIV) == TIM_CKD_DIV2) || \
+ ((DIV) == TIM_CKD_DIV4))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Counter_Mode
+ * @{
+ */
+
+#define TIM_CounterMode_Up ((uint16_t)0x0000)
+#define TIM_CounterMode_Down ((uint16_t)0x0010)
+#define TIM_CounterMode_CenterAligned1 ((uint16_t)0x0020)
+#define TIM_CounterMode_CenterAligned2 ((uint16_t)0x0040)
+#define TIM_CounterMode_CenterAligned3 ((uint16_t)0x0060)
+#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_CounterMode_Up) || \
+ ((MODE) == TIM_CounterMode_Down) || \
+ ((MODE) == TIM_CounterMode_CenterAligned1) || \
+ ((MODE) == TIM_CounterMode_CenterAligned2) || \
+ ((MODE) == TIM_CounterMode_CenterAligned3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Polarity
+ * @{
+ */
+
+#define TIM_OCPolarity_High ((uint16_t)0x0000)
+#define TIM_OCPolarity_Low ((uint16_t)0x0002)
+#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPolarity_High) || \
+ ((POLARITY) == TIM_OCPolarity_Low))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Polarity
+ * @{
+ */
+
+#define TIM_OCNPolarity_High ((uint16_t)0x0000)
+#define TIM_OCNPolarity_Low ((uint16_t)0x0008)
+#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPolarity_High) || \
+ ((POLARITY) == TIM_OCNPolarity_Low))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_state
+ * @{
+ */
+
+#define TIM_OutputState_Disable ((uint16_t)0x0000)
+#define TIM_OutputState_Enable ((uint16_t)0x0001)
+#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OutputState_Disable) || \
+ ((STATE) == TIM_OutputState_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_state
+ * @{
+ */
+
+#define TIM_OutputNState_Disable ((uint16_t)0x0000)
+#define TIM_OutputNState_Enable ((uint16_t)0x0004)
+#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OutputNState_Disable) || \
+ ((STATE) == TIM_OutputNState_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Capture_Compare_state
+ * @{
+ */
+
+#define TIM_CCx_Enable ((uint16_t)0x0001)
+#define TIM_CCx_Disable ((uint16_t)0x0000)
+#define IS_TIM_CCX(CCX) (((CCX) == TIM_CCx_Enable) || \
+ ((CCX) == TIM_CCx_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Capture_Compare_N_state
+ * @{
+ */
+
+#define TIM_CCxN_Enable ((uint16_t)0x0004)
+#define TIM_CCxN_Disable ((uint16_t)0x0000)
+#define IS_TIM_CCXN(CCXN) (((CCXN) == TIM_CCxN_Enable) || \
+ ((CCXN) == TIM_CCxN_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup Break_Input_enable_disable
+ * @{
+ */
+
+#define TIM_Break_Enable ((uint16_t)0x1000)
+#define TIM_Break_Disable ((uint16_t)0x0000)
+#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_Break_Enable) || \
+ ((STATE) == TIM_Break_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup Break_Polarity
+ * @{
+ */
+
+#define TIM_BreakPolarity_Low ((uint16_t)0x0000)
+#define TIM_BreakPolarity_High ((uint16_t)0x2000)
+#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BreakPolarity_Low) || \
+ ((POLARITY) == TIM_BreakPolarity_High))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_AOE_Bit_Set_Reset
+ * @{
+ */
+
+#define TIM_AutomaticOutput_Enable ((uint16_t)0x4000)
+#define TIM_AutomaticOutput_Disable ((uint16_t)0x0000)
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AutomaticOutput_Enable) || \
+ ((STATE) == TIM_AutomaticOutput_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup Lock_level
+ * @{
+ */
+
+#define TIM_LOCKLevel_OFF ((uint16_t)0x0000)
+#define TIM_LOCKLevel_1 ((uint16_t)0x0100)
+#define TIM_LOCKLevel_2 ((uint16_t)0x0200)
+#define TIM_LOCKLevel_3 ((uint16_t)0x0300)
+#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLevel_OFF) || \
+ ((LEVEL) == TIM_LOCKLevel_1) || \
+ ((LEVEL) == TIM_LOCKLevel_2) || \
+ ((LEVEL) == TIM_LOCKLevel_3))
+/**
+ * @}
+ */
+
+/** @defgroup OSSI_Off_State_Selection_for_Idle_mode_state
+ * @{
+ */
+
+#define TIM_OSSIState_Enable ((uint16_t)0x0400)
+#define TIM_OSSIState_Disable ((uint16_t)0x0000)
+#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSIState_Enable) || \
+ ((STATE) == TIM_OSSIState_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup OSSR_Off_State_Selection_for_Run_mode_state
+ * @{
+ */
+
+#define TIM_OSSRState_Enable ((uint16_t)0x0800)
+#define TIM_OSSRState_Disable ((uint16_t)0x0000)
+#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSRState_Enable) || \
+ ((STATE) == TIM_OSSRState_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Idle_State
+ * @{
+ */
+
+#define TIM_OCIdleState_Set ((uint16_t)0x0100)
+#define TIM_OCIdleState_Reset ((uint16_t)0x0000)
+#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIdleState_Set) || \
+ ((STATE) == TIM_OCIdleState_Reset))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State
+ * @{
+ */
+
+#define TIM_OCNIdleState_Set ((uint16_t)0x0200)
+#define TIM_OCNIdleState_Reset ((uint16_t)0x0000)
+#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIdleState_Set) || \
+ ((STATE) == TIM_OCNIdleState_Reset))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Polarity
+ * @{
+ */
+
+#define TIM_ICPolarity_Rising ((uint16_t)0x0000)
+#define TIM_ICPolarity_Falling ((uint16_t)0x0002)
+#define TIM_ICPolarity_BothEdge ((uint16_t)0x000A)
+#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \
+ ((POLARITY) == TIM_ICPolarity_Falling))
+#define IS_TIM_IC_POLARITY_LITE(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \
+ ((POLARITY) == TIM_ICPolarity_Falling)|| \
+ ((POLARITY) == TIM_ICPolarity_BothEdge))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Selection
+ * @{
+ */
+
+#define TIM_ICSelection_DirectTI ((uint16_t)0x0001) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSelection_IndirectTI ((uint16_t)0x0002) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC2, IC1, IC4 or IC3, respectively. */
+#define TIM_ICSelection_TRC ((uint16_t)0x0003) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC. */
+#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSelection_DirectTI) || \
+ ((SELECTION) == TIM_ICSelection_IndirectTI) || \
+ ((SELECTION) == TIM_ICSelection_TRC))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Prescaler
+ * @{
+ */
+
+#define TIM_ICPSC_DIV1 ((uint16_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input. */
+#define TIM_ICPSC_DIV2 ((uint16_t)0x0004) /*!< Capture performed once every 2 events. */
+#define TIM_ICPSC_DIV4 ((uint16_t)0x0008) /*!< Capture performed once every 4 events. */
+#define TIM_ICPSC_DIV8 ((uint16_t)0x000C) /*!< Capture performed once every 8 events. */
+#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \
+ ((PRESCALER) == TIM_ICPSC_DIV2) || \
+ ((PRESCALER) == TIM_ICPSC_DIV4) || \
+ ((PRESCALER) == TIM_ICPSC_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_interrupt_sources
+ * @{
+ */
+
+#define TIM_IT_Update ((uint16_t)0x0001)
+#define TIM_IT_CC1 ((uint16_t)0x0002)
+#define TIM_IT_CC2 ((uint16_t)0x0004)
+#define TIM_IT_CC3 ((uint16_t)0x0008)
+#define TIM_IT_CC4 ((uint16_t)0x0010)
+#define TIM_IT_COM ((uint16_t)0x0020)
+#define TIM_IT_Trigger ((uint16_t)0x0040)
+#define TIM_IT_Break ((uint16_t)0x0080)
+#define IS_TIM_IT(IT) ((((IT) & (uint16_t)0xFF00) == 0x0000) && ((IT) != 0x0000))
+
+#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_Update) || \
+ ((IT) == TIM_IT_CC1) || \
+ ((IT) == TIM_IT_CC2) || \
+ ((IT) == TIM_IT_CC3) || \
+ ((IT) == TIM_IT_CC4) || \
+ ((IT) == TIM_IT_COM) || \
+ ((IT) == TIM_IT_Trigger) || \
+ ((IT) == TIM_IT_Break))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address
+ * @{
+ */
+
+#define TIM_DMABase_CR1 ((uint16_t)0x0000)
+#define TIM_DMABase_CR2 ((uint16_t)0x0001)
+#define TIM_DMABase_SMCR ((uint16_t)0x0002)
+#define TIM_DMABase_DIER ((uint16_t)0x0003)
+#define TIM_DMABase_SR ((uint16_t)0x0004)
+#define TIM_DMABase_EGR ((uint16_t)0x0005)
+#define TIM_DMABase_CCMR1 ((uint16_t)0x0006)
+#define TIM_DMABase_CCMR2 ((uint16_t)0x0007)
+#define TIM_DMABase_CCER ((uint16_t)0x0008)
+#define TIM_DMABase_CNT ((uint16_t)0x0009)
+#define TIM_DMABase_PSC ((uint16_t)0x000A)
+#define TIM_DMABase_ARR ((uint16_t)0x000B)
+#define TIM_DMABase_RCR ((uint16_t)0x000C)
+#define TIM_DMABase_CCR1 ((uint16_t)0x000D)
+#define TIM_DMABase_CCR2 ((uint16_t)0x000E)
+#define TIM_DMABase_CCR3 ((uint16_t)0x000F)
+#define TIM_DMABase_CCR4 ((uint16_t)0x0010)
+#define TIM_DMABase_BDTR ((uint16_t)0x0011)
+#define TIM_DMABase_DCR ((uint16_t)0x0012)
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \
+ ((BASE) == TIM_DMABase_CR2) || \
+ ((BASE) == TIM_DMABase_SMCR) || \
+ ((BASE) == TIM_DMABase_DIER) || \
+ ((BASE) == TIM_DMABase_SR) || \
+ ((BASE) == TIM_DMABase_EGR) || \
+ ((BASE) == TIM_DMABase_CCMR1) || \
+ ((BASE) == TIM_DMABase_CCMR2) || \
+ ((BASE) == TIM_DMABase_CCER) || \
+ ((BASE) == TIM_DMABase_CNT) || \
+ ((BASE) == TIM_DMABase_PSC) || \
+ ((BASE) == TIM_DMABase_ARR) || \
+ ((BASE) == TIM_DMABase_RCR) || \
+ ((BASE) == TIM_DMABase_CCR1) || \
+ ((BASE) == TIM_DMABase_CCR2) || \
+ ((BASE) == TIM_DMABase_CCR3) || \
+ ((BASE) == TIM_DMABase_CCR4) || \
+ ((BASE) == TIM_DMABase_BDTR) || \
+ ((BASE) == TIM_DMABase_DCR))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Burst_Length
+ * @{
+ */
+
+#define TIM_DMABurstLength_1Transfer ((uint16_t)0x0000)
+#define TIM_DMABurstLength_2Transfers ((uint16_t)0x0100)
+#define TIM_DMABurstLength_3Transfers ((uint16_t)0x0200)
+#define TIM_DMABurstLength_4Transfers ((uint16_t)0x0300)
+#define TIM_DMABurstLength_5Transfers ((uint16_t)0x0400)
+#define TIM_DMABurstLength_6Transfers ((uint16_t)0x0500)
+#define TIM_DMABurstLength_7Transfers ((uint16_t)0x0600)
+#define TIM_DMABurstLength_8Transfers ((uint16_t)0x0700)
+#define TIM_DMABurstLength_9Transfers ((uint16_t)0x0800)
+#define TIM_DMABurstLength_10Transfers ((uint16_t)0x0900)
+#define TIM_DMABurstLength_11Transfers ((uint16_t)0x0A00)
+#define TIM_DMABurstLength_12Transfers ((uint16_t)0x0B00)
+#define TIM_DMABurstLength_13Transfers ((uint16_t)0x0C00)
+#define TIM_DMABurstLength_14Transfers ((uint16_t)0x0D00)
+#define TIM_DMABurstLength_15Transfers ((uint16_t)0x0E00)
+#define TIM_DMABurstLength_16Transfers ((uint16_t)0x0F00)
+#define TIM_DMABurstLength_17Transfers ((uint16_t)0x1000)
+#define TIM_DMABurstLength_18Transfers ((uint16_t)0x1100)
+#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \
+ ((LENGTH) == TIM_DMABurstLength_2Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_3Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_4Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_5Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_6Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_7Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_8Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_9Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_10Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_11Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_12Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_13Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_14Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_15Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_16Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_17Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_18Transfers))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_sources
+ * @{
+ */
+
+#define TIM_DMA_Update ((uint16_t)0x0100)
+#define TIM_DMA_CC1 ((uint16_t)0x0200)
+#define TIM_DMA_CC2 ((uint16_t)0x0400)
+#define TIM_DMA_CC3 ((uint16_t)0x0800)
+#define TIM_DMA_CC4 ((uint16_t)0x1000)
+#define TIM_DMA_COM ((uint16_t)0x2000)
+#define TIM_DMA_Trigger ((uint16_t)0x4000)
+#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0x80FF) == 0x0000) && ((SOURCE) != 0x0000))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_External_Trigger_Prescaler
+ * @{
+ */
+
+#define TIM_ExtTRGPSC_OFF ((uint16_t)0x0000)
+#define TIM_ExtTRGPSC_DIV2 ((uint16_t)0x1000)
+#define TIM_ExtTRGPSC_DIV4 ((uint16_t)0x2000)
+#define TIM_ExtTRGPSC_DIV8 ((uint16_t)0x3000)
+#define IS_TIM_EXT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ExtTRGPSC_OFF) || \
+ ((PRESCALER) == TIM_ExtTRGPSC_DIV2) || \
+ ((PRESCALER) == TIM_ExtTRGPSC_DIV4) || \
+ ((PRESCALER) == TIM_ExtTRGPSC_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Internal_Trigger_Selection
+ * @{
+ */
+
+#define TIM_TS_ITR0 ((uint16_t)0x0000)
+#define TIM_TS_ITR1 ((uint16_t)0x0010)
+#define TIM_TS_ITR2 ((uint16_t)0x0020)
+#define TIM_TS_ITR3 ((uint16_t)0x0030)
+#define TIM_TS_TI1F_ED ((uint16_t)0x0040)
+#define TIM_TS_TI1FP1 ((uint16_t)0x0050)
+#define TIM_TS_TI2FP2 ((uint16_t)0x0060)
+#define TIM_TS_ETRF ((uint16_t)0x0070)
+#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_TI1F_ED) || \
+ ((SELECTION) == TIM_TS_TI1FP1) || \
+ ((SELECTION) == TIM_TS_TI2FP2) || \
+ ((SELECTION) == TIM_TS_ETRF))
+#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_TIx_External_Clock_Source
+ * @{
+ */
+
+#define TIM_TIxExternalCLK1Source_TI1 ((uint16_t)0x0050)
+#define TIM_TIxExternalCLK1Source_TI2 ((uint16_t)0x0060)
+#define TIM_TIxExternalCLK1Source_TI1ED ((uint16_t)0x0040)
+#define IS_TIM_TIXCLK_SOURCE(SOURCE) (((SOURCE) == TIM_TIxExternalCLK1Source_TI1) || \
+ ((SOURCE) == TIM_TIxExternalCLK1Source_TI2) || \
+ ((SOURCE) == TIM_TIxExternalCLK1Source_TI1ED))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_External_Trigger_Polarity
+ * @{
+ */
+#define TIM_ExtTRGPolarity_Inverted ((uint16_t)0x8000)
+#define TIM_ExtTRGPolarity_NonInverted ((uint16_t)0x0000)
+#define IS_TIM_EXT_POLARITY(POLARITY) (((POLARITY) == TIM_ExtTRGPolarity_Inverted) || \
+ ((POLARITY) == TIM_ExtTRGPolarity_NonInverted))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Prescaler_Reload_Mode
+ * @{
+ */
+
+#define TIM_PSCReloadMode_Update ((uint16_t)0x0000)
+#define TIM_PSCReloadMode_Immediate ((uint16_t)0x0001)
+#define IS_TIM_PRESCALER_RELOAD(RELOAD) (((RELOAD) == TIM_PSCReloadMode_Update) || \
+ ((RELOAD) == TIM_PSCReloadMode_Immediate))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Forced_Action
+ * @{
+ */
+
+#define TIM_ForcedAction_Active ((uint16_t)0x0050)
+#define TIM_ForcedAction_InActive ((uint16_t)0x0040)
+#define IS_TIM_FORCED_ACTION(ACTION) (((ACTION) == TIM_ForcedAction_Active) || \
+ ((ACTION) == TIM_ForcedAction_InActive))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Encoder_Mode
+ * @{
+ */
+
+#define TIM_EncoderMode_TI1 ((uint16_t)0x0001)
+#define TIM_EncoderMode_TI2 ((uint16_t)0x0002)
+#define TIM_EncoderMode_TI12 ((uint16_t)0x0003)
+#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_EncoderMode_TI1) || \
+ ((MODE) == TIM_EncoderMode_TI2) || \
+ ((MODE) == TIM_EncoderMode_TI12))
+/**
+ * @}
+ */
+
+
+/** @defgroup TIM_Event_Source
+ * @{
+ */
+
+#define TIM_EventSource_Update ((uint16_t)0x0001)
+#define TIM_EventSource_CC1 ((uint16_t)0x0002)
+#define TIM_EventSource_CC2 ((uint16_t)0x0004)
+#define TIM_EventSource_CC3 ((uint16_t)0x0008)
+#define TIM_EventSource_CC4 ((uint16_t)0x0010)
+#define TIM_EventSource_COM ((uint16_t)0x0020)
+#define TIM_EventSource_Trigger ((uint16_t)0x0040)
+#define TIM_EventSource_Break ((uint16_t)0x0080)
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0xFF00) == 0x0000) && ((SOURCE) != 0x0000))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Update_Source
+ * @{
+ */
+
+#define TIM_UpdateSource_Global ((uint16_t)0x0000) /*!< Source of update is the counter overflow/underflow
+ or the setting of UG bit, or an update generation
+ through the slave mode controller. */
+#define TIM_UpdateSource_Regular ((uint16_t)0x0001) /*!< Source of update is counter overflow/underflow. */
+#define IS_TIM_UPDATE_SOURCE(SOURCE) (((SOURCE) == TIM_UpdateSource_Global) || \
+ ((SOURCE) == TIM_UpdateSource_Regular))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Preload_State
+ * @{
+ */
+
+#define TIM_OCPreload_Enable ((uint16_t)0x0008)
+#define TIM_OCPreload_Disable ((uint16_t)0x0000)
+#define IS_TIM_OCPRELOAD_STATE(STATE) (((STATE) == TIM_OCPreload_Enable) || \
+ ((STATE) == TIM_OCPreload_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Fast_State
+ * @{
+ */
+
+#define TIM_OCFast_Enable ((uint16_t)0x0004)
+#define TIM_OCFast_Disable ((uint16_t)0x0000)
+#define IS_TIM_OCFAST_STATE(STATE) (((STATE) == TIM_OCFast_Enable) || \
+ ((STATE) == TIM_OCFast_Disable))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Clear_State
+ * @{
+ */
+
+#define TIM_OCClear_Enable ((uint16_t)0x0080)
+#define TIM_OCClear_Disable ((uint16_t)0x0000)
+#define IS_TIM_OCCLEAR_STATE(STATE) (((STATE) == TIM_OCClear_Enable) || \
+ ((STATE) == TIM_OCClear_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Output_Source
+ * @{
+ */
+
+#define TIM_TRGOSource_Reset ((uint16_t)0x0000)
+#define TIM_TRGOSource_Enable ((uint16_t)0x0010)
+#define TIM_TRGOSource_Update ((uint16_t)0x0020)
+#define TIM_TRGOSource_OC1 ((uint16_t)0x0030)
+#define TIM_TRGOSource_OC1Ref ((uint16_t)0x0040)
+#define TIM_TRGOSource_OC2Ref ((uint16_t)0x0050)
+#define TIM_TRGOSource_OC3Ref ((uint16_t)0x0060)
+#define TIM_TRGOSource_OC4Ref ((uint16_t)0x0070)
+#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGOSource_Reset) || \
+ ((SOURCE) == TIM_TRGOSource_Enable) || \
+ ((SOURCE) == TIM_TRGOSource_Update) || \
+ ((SOURCE) == TIM_TRGOSource_OC1) || \
+ ((SOURCE) == TIM_TRGOSource_OC1Ref) || \
+ ((SOURCE) == TIM_TRGOSource_OC2Ref) || \
+ ((SOURCE) == TIM_TRGOSource_OC3Ref) || \
+ ((SOURCE) == TIM_TRGOSource_OC4Ref))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Slave_Mode
+ * @{
+ */
+
+#define TIM_SlaveMode_Reset ((uint16_t)0x0004)
+#define TIM_SlaveMode_Gated ((uint16_t)0x0005)
+#define TIM_SlaveMode_Trigger ((uint16_t)0x0006)
+#define TIM_SlaveMode_External1 ((uint16_t)0x0007)
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SlaveMode_Reset) || \
+ ((MODE) == TIM_SlaveMode_Gated) || \
+ ((MODE) == TIM_SlaveMode_Trigger) || \
+ ((MODE) == TIM_SlaveMode_External1))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Slave_Mode
+ * @{
+ */
+
+#define TIM_MasterSlaveMode_Enable ((uint16_t)0x0080)
+#define TIM_MasterSlaveMode_Disable ((uint16_t)0x0000)
+#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MasterSlaveMode_Enable) || \
+ ((STATE) == TIM_MasterSlaveMode_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Flags
+ * @{
+ */
+
+#define TIM_FLAG_Update ((uint16_t)0x0001)
+#define TIM_FLAG_CC1 ((uint16_t)0x0002)
+#define TIM_FLAG_CC2 ((uint16_t)0x0004)
+#define TIM_FLAG_CC3 ((uint16_t)0x0008)
+#define TIM_FLAG_CC4 ((uint16_t)0x0010)
+#define TIM_FLAG_COM ((uint16_t)0x0020)
+#define TIM_FLAG_Trigger ((uint16_t)0x0040)
+#define TIM_FLAG_Break ((uint16_t)0x0080)
+#define TIM_FLAG_CC1OF ((uint16_t)0x0200)
+#define TIM_FLAG_CC2OF ((uint16_t)0x0400)
+#define TIM_FLAG_CC3OF ((uint16_t)0x0800)
+#define TIM_FLAG_CC4OF ((uint16_t)0x1000)
+#define IS_TIM_GET_FLAG(FLAG) (((FLAG) == TIM_FLAG_Update) || \
+ ((FLAG) == TIM_FLAG_CC1) || \
+ ((FLAG) == TIM_FLAG_CC2) || \
+ ((FLAG) == TIM_FLAG_CC3) || \
+ ((FLAG) == TIM_FLAG_CC4) || \
+ ((FLAG) == TIM_FLAG_COM) || \
+ ((FLAG) == TIM_FLAG_Trigger) || \
+ ((FLAG) == TIM_FLAG_Break) || \
+ ((FLAG) == TIM_FLAG_CC1OF) || \
+ ((FLAG) == TIM_FLAG_CC2OF) || \
+ ((FLAG) == TIM_FLAG_CC3OF) || \
+ ((FLAG) == TIM_FLAG_CC4OF))
+
+
+#define IS_TIM_CLEAR_FLAG(TIM_FLAG) ((((TIM_FLAG) & (uint16_t)0xE100) == 0x0000) && ((TIM_FLAG) != 0x0000))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Filer_Value
+ * @{
+ */
+
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_External_Trigger_Filter
+ * @{
+ */
+
+#define IS_TIM_EXT_FILTER(EXTFILTER) ((EXTFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Legacy
+ * @{
+ */
+
+#define TIM_DMABurstLength_1Byte TIM_DMABurstLength_1Transfer
+#define TIM_DMABurstLength_2Bytes TIM_DMABurstLength_2Transfers
+#define TIM_DMABurstLength_3Bytes TIM_DMABurstLength_3Transfers
+#define TIM_DMABurstLength_4Bytes TIM_DMABurstLength_4Transfers
+#define TIM_DMABurstLength_5Bytes TIM_DMABurstLength_5Transfers
+#define TIM_DMABurstLength_6Bytes TIM_DMABurstLength_6Transfers
+#define TIM_DMABurstLength_7Bytes TIM_DMABurstLength_7Transfers
+#define TIM_DMABurstLength_8Bytes TIM_DMABurstLength_8Transfers
+#define TIM_DMABurstLength_9Bytes TIM_DMABurstLength_9Transfers
+#define TIM_DMABurstLength_10Bytes TIM_DMABurstLength_10Transfers
+#define TIM_DMABurstLength_11Bytes TIM_DMABurstLength_11Transfers
+#define TIM_DMABurstLength_12Bytes TIM_DMABurstLength_12Transfers
+#define TIM_DMABurstLength_13Bytes TIM_DMABurstLength_13Transfers
+#define TIM_DMABurstLength_14Bytes TIM_DMABurstLength_14Transfers
+#define TIM_DMABurstLength_15Bytes TIM_DMABurstLength_15Transfers
+#define TIM_DMABurstLength_16Bytes TIM_DMABurstLength_16Transfers
+#define TIM_DMABurstLength_17Bytes TIM_DMABurstLength_17Transfers
+#define TIM_DMABurstLength_18Bytes TIM_DMABurstLength_18Transfers
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions
+ * @{
+ */
+
+void TIM_DeInit(TIM_TypeDef* TIMx);
+void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct);
+void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct);
+void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct);
+void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct);
+void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct);
+void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct);
+void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct);
+void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState);
+void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource);
+void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength);
+void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState);
+void TIM_InternalClockConfig(TIM_TypeDef* TIMx);
+void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource);
+void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource,
+ uint16_t TIM_ICPolarity, uint16_t ICFilter);
+void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
+ uint16_t ExtTRGFilter);
+void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler,
+ uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter);
+void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
+ uint16_t ExtTRGFilter);
+void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode);
+void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode);
+void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource);
+void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode,
+ uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity);
+void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity);
+void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity);
+void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity);
+void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx);
+void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN);
+void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode);
+void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource);
+void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode);
+void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource);
+void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode);
+void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode);
+void TIM_SetCounter(TIM_TypeDef* TIMx, uint16_t Counter);
+void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint16_t Autoreload);
+void TIM_SetCompare1(TIM_TypeDef* TIMx, uint16_t Compare1);
+void TIM_SetCompare2(TIM_TypeDef* TIMx, uint16_t Compare2);
+void TIM_SetCompare3(TIM_TypeDef* TIMx, uint16_t Compare3);
+void TIM_SetCompare4(TIM_TypeDef* TIMx, uint16_t Compare4);
+void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD);
+uint16_t TIM_GetCapture1(TIM_TypeDef* TIMx);
+uint16_t TIM_GetCapture2(TIM_TypeDef* TIMx);
+uint16_t TIM_GetCapture3(TIM_TypeDef* TIMx);
+uint16_t TIM_GetCapture4(TIM_TypeDef* TIMx);
+uint16_t TIM_GetCounter(TIM_TypeDef* TIMx);
+uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx);
+FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG);
+void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG);
+ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT);
+void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_TIM_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_usart.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_usart.h
new file mode 100644
index 00000000..61ae249a
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_usart.h
@@ -0,0 +1,412 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_usart.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the USART
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_USART_H
+#define __STM32F10x_USART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup USART
+ * @{
+ */
+
+/** @defgroup USART_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief USART Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (16 * (USART_InitStruct->USART_BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 16) + 0.5 */
+
+ uint16_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref USART_Word_Length */
+
+ uint16_t USART_StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref USART_Stop_Bits */
+
+ uint16_t USART_Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref USART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint16_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref USART_Mode */
+
+ uint16_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled
+ or disabled.
+ This parameter can be a value of @ref USART_Hardware_Flow_Control */
+} USART_InitTypeDef;
+
+/**
+ * @brief USART Clock Init Structure definition
+ */
+
+typedef struct
+{
+
+ uint16_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled.
+ This parameter can be a value of @ref USART_Clock */
+
+ uint16_t USART_CPOL; /*!< Specifies the steady state value of the serial clock.
+ This parameter can be a value of @ref USART_Clock_Polarity */
+
+ uint16_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref USART_Clock_Phase */
+
+ uint16_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref USART_Last_Bit */
+} USART_ClockInitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Exported_Constants
+ * @{
+ */
+
+#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \
+ ((PERIPH) == USART2) || \
+ ((PERIPH) == USART3) || \
+ ((PERIPH) == UART4) || \
+ ((PERIPH) == UART5))
+
+#define IS_USART_123_PERIPH(PERIPH) (((PERIPH) == USART1) || \
+ ((PERIPH) == USART2) || \
+ ((PERIPH) == USART3))
+
+#define IS_USART_1234_PERIPH(PERIPH) (((PERIPH) == USART1) || \
+ ((PERIPH) == USART2) || \
+ ((PERIPH) == USART3) || \
+ ((PERIPH) == UART4))
+/** @defgroup USART_Word_Length
+ * @{
+ */
+
+#define USART_WordLength_8b ((uint16_t)0x0000)
+#define USART_WordLength_9b ((uint16_t)0x1000)
+
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \
+ ((LENGTH) == USART_WordLength_9b))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Stop_Bits
+ * @{
+ */
+
+#define USART_StopBits_1 ((uint16_t)0x0000)
+#define USART_StopBits_0_5 ((uint16_t)0x1000)
+#define USART_StopBits_2 ((uint16_t)0x2000)
+#define USART_StopBits_1_5 ((uint16_t)0x3000)
+#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \
+ ((STOPBITS) == USART_StopBits_0_5) || \
+ ((STOPBITS) == USART_StopBits_2) || \
+ ((STOPBITS) == USART_StopBits_1_5))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Parity
+ * @{
+ */
+
+#define USART_Parity_No ((uint16_t)0x0000)
+#define USART_Parity_Even ((uint16_t)0x0400)
+#define USART_Parity_Odd ((uint16_t)0x0600)
+#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \
+ ((PARITY) == USART_Parity_Even) || \
+ ((PARITY) == USART_Parity_Odd))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Mode
+ * @{
+ */
+
+#define USART_Mode_Rx ((uint16_t)0x0004)
+#define USART_Mode_Tx ((uint16_t)0x0008)
+#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Hardware_Flow_Control
+ * @{
+ */
+#define USART_HardwareFlowControl_None ((uint16_t)0x0000)
+#define USART_HardwareFlowControl_RTS ((uint16_t)0x0100)
+#define USART_HardwareFlowControl_CTS ((uint16_t)0x0200)
+#define USART_HardwareFlowControl_RTS_CTS ((uint16_t)0x0300)
+#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\
+ (((CONTROL) == USART_HardwareFlowControl_None) || \
+ ((CONTROL) == USART_HardwareFlowControl_RTS) || \
+ ((CONTROL) == USART_HardwareFlowControl_CTS) || \
+ ((CONTROL) == USART_HardwareFlowControl_RTS_CTS))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock
+ * @{
+ */
+#define USART_Clock_Disable ((uint16_t)0x0000)
+#define USART_Clock_Enable ((uint16_t)0x0800)
+#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \
+ ((CLOCK) == USART_Clock_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Polarity
+ * @{
+ */
+
+#define USART_CPOL_Low ((uint16_t)0x0000)
+#define USART_CPOL_High ((uint16_t)0x0400)
+#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High))
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Phase
+ * @{
+ */
+
+#define USART_CPHA_1Edge ((uint16_t)0x0000)
+#define USART_CPHA_2Edge ((uint16_t)0x0200)
+#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge))
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Last_Bit
+ * @{
+ */
+
+#define USART_LastBit_Disable ((uint16_t)0x0000)
+#define USART_LastBit_Enable ((uint16_t)0x0100)
+#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \
+ ((LASTBIT) == USART_LastBit_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interrupt_definition
+ * @{
+ */
+
+#define USART_IT_PE ((uint16_t)0x0028)
+#define USART_IT_TXE ((uint16_t)0x0727)
+#define USART_IT_TC ((uint16_t)0x0626)
+#define USART_IT_RXNE ((uint16_t)0x0525)
+#define USART_IT_IDLE ((uint16_t)0x0424)
+#define USART_IT_LBD ((uint16_t)0x0846)
+#define USART_IT_CTS ((uint16_t)0x096A)
+#define USART_IT_ERR ((uint16_t)0x0060)
+#define USART_IT_ORE ((uint16_t)0x0360)
+#define USART_IT_NE ((uint16_t)0x0260)
+#define USART_IT_FE ((uint16_t)0x0160)
+#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
+ ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
+ ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
+ ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR))
+#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
+ ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
+ ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
+ ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \
+ ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE))
+#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
+ ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS))
+/**
+ * @}
+ */
+
+/** @defgroup USART_DMA_Requests
+ * @{
+ */
+
+#define USART_DMAReq_Tx ((uint16_t)0x0080)
+#define USART_DMAReq_Rx ((uint16_t)0x0040)
+#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00))
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_WakeUp_methods
+ * @{
+ */
+
+#define USART_WakeUp_IdleLine ((uint16_t)0x0000)
+#define USART_WakeUp_AddressMark ((uint16_t)0x0800)
+#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \
+ ((WAKEUP) == USART_WakeUp_AddressMark))
+/**
+ * @}
+ */
+
+/** @defgroup USART_LIN_Break_Detection_Length
+ * @{
+ */
+
+#define USART_LINBreakDetectLength_10b ((uint16_t)0x0000)
+#define USART_LINBreakDetectLength_11b ((uint16_t)0x0020)
+#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \
+ (((LENGTH) == USART_LINBreakDetectLength_10b) || \
+ ((LENGTH) == USART_LINBreakDetectLength_11b))
+/**
+ * @}
+ */
+
+/** @defgroup USART_IrDA_Low_Power
+ * @{
+ */
+
+#define USART_IrDAMode_LowPower ((uint16_t)0x0004)
+#define USART_IrDAMode_Normal ((uint16_t)0x0000)
+#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \
+ ((MODE) == USART_IrDAMode_Normal))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Flags
+ * @{
+ */
+
+#define USART_FLAG_CTS ((uint16_t)0x0200)
+#define USART_FLAG_LBD ((uint16_t)0x0100)
+#define USART_FLAG_TXE ((uint16_t)0x0080)
+#define USART_FLAG_TC ((uint16_t)0x0040)
+#define USART_FLAG_RXNE ((uint16_t)0x0020)
+#define USART_FLAG_IDLE ((uint16_t)0x0010)
+#define USART_FLAG_ORE ((uint16_t)0x0008)
+#define USART_FLAG_NE ((uint16_t)0x0004)
+#define USART_FLAG_FE ((uint16_t)0x0002)
+#define USART_FLAG_PE ((uint16_t)0x0001)
+#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \
+ ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \
+ ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \
+ ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \
+ ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE))
+
+#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00))
+#define IS_USART_PERIPH_FLAG(PERIPH, USART_FLAG) ((((*(uint32_t*)&(PERIPH)) != UART4_BASE) &&\
+ ((*(uint32_t*)&(PERIPH)) != UART5_BASE)) \
+ || ((USART_FLAG) != USART_FLAG_CTS))
+#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x0044AA21))
+#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF)
+#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Exported_Functions
+ * @{
+ */
+
+void USART_DeInit(USART_TypeDef* USARTx);
+void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct);
+void USART_StructInit(USART_InitTypeDef* USART_InitStruct);
+void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct);
+void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct);
+void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState);
+void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState);
+void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address);
+void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp);
+void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength);
+void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_SendData(USART_TypeDef* USARTx, uint16_t Data);
+uint16_t USART_ReceiveData(USART_TypeDef* USARTx);
+void USART_SendBreak(USART_TypeDef* USARTx);
+void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime);
+void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler);
+void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode);
+void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState);
+FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG);
+void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG);
+ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT);
+void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_USART_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_wwdg.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_wwdg.h
new file mode 100644
index 00000000..cd573da4
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/inc/stm32f10x_wwdg.h
@@ -0,0 +1,115 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_wwdg.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the WWDG firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_WWDG_H
+#define __STM32F10x_WWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup WWDG
+ * @{
+ */
+
+/** @defgroup WWDG_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Exported_Constants
+ * @{
+ */
+
+/** @defgroup WWDG_Prescaler
+ * @{
+ */
+
+#define WWDG_Prescaler_1 ((uint32_t)0x00000000)
+#define WWDG_Prescaler_2 ((uint32_t)0x00000080)
+#define WWDG_Prescaler_4 ((uint32_t)0x00000100)
+#define WWDG_Prescaler_8 ((uint32_t)0x00000180)
+#define IS_WWDG_PRESCALER(PRESCALER) (((PRESCALER) == WWDG_Prescaler_1) || \
+ ((PRESCALER) == WWDG_Prescaler_2) || \
+ ((PRESCALER) == WWDG_Prescaler_4) || \
+ ((PRESCALER) == WWDG_Prescaler_8))
+#define IS_WWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0x7F)
+#define IS_WWDG_COUNTER(COUNTER) (((COUNTER) >= 0x40) && ((COUNTER) <= 0x7F))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Exported_Functions
+ * @{
+ */
+
+void WWDG_DeInit(void);
+void WWDG_SetPrescaler(uint32_t WWDG_Prescaler);
+void WWDG_SetWindowValue(uint8_t WindowValue);
+void WWDG_EnableIT(void);
+void WWDG_SetCounter(uint8_t Counter);
+void WWDG_Enable(uint8_t Counter);
+FlagStatus WWDG_GetFlagStatus(void);
+void WWDG_ClearFlag(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_WWDG_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/misc.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/misc.c
new file mode 100644
index 00000000..ec9165f7
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/misc.c
@@ -0,0 +1,225 @@
+/**
+ ******************************************************************************
+ * @file misc.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the miscellaneous firmware functions (add-on
+ * to CMSIS functions).
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "misc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup MISC
+ * @brief MISC driver modules
+ * @{
+ */
+
+/** @defgroup MISC_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Private_Defines
+ * @{
+ */
+
+#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000)
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Configures the priority grouping: pre-emption priority and subpriority.
+ * @param NVIC_PriorityGroup: specifies the priority grouping bits length.
+ * This parameter can be one of the following values:
+ * @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority
+ * 4 bits for subpriority
+ * @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority
+ * 3 bits for subpriority
+ * @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority
+ * 2 bits for subpriority
+ * @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority
+ * 1 bits for subpriority
+ * @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority
+ * 0 bits for subpriority
+ * @retval None
+ */
+void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup));
+
+ /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */
+ SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup;
+}
+
+/**
+ * @brief Initializes the NVIC peripheral according to the specified
+ * parameters in the NVIC_InitStruct.
+ * @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains
+ * the configuration information for the specified NVIC peripheral.
+ * @retval None
+ */
+void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
+{
+ uint32_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F;
+
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd));
+ assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority));
+ assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority));
+
+ if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE)
+ {
+ /* Compute the Corresponding IRQ Priority --------------------------------*/
+ tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08;
+ tmppre = (0x4 - tmppriority);
+ tmpsub = tmpsub >> tmppriority;
+
+ tmppriority = (uint32_t)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre;
+ tmppriority |= NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub;
+ tmppriority = tmppriority << 0x04;
+
+ NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority;
+
+ /* Enable the Selected IRQ Channels --------------------------------------*/
+ NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
+ (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
+ }
+ else
+ {
+ /* Disable the Selected IRQ Channels -------------------------------------*/
+ NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
+ (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
+ }
+}
+
+/**
+ * @brief Sets the vector table location and Offset.
+ * @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory.
+ * This parameter can be one of the following values:
+ * @arg NVIC_VectTab_RAM
+ * @arg NVIC_VectTab_FLASH
+ * @param Offset: Vector Table base offset field. This value must be a multiple
+ * of 0x200.
+ * @retval None
+ */
+void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_VECTTAB(NVIC_VectTab));
+ assert_param(IS_NVIC_OFFSET(Offset));
+
+ SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80);
+}
+
+/**
+ * @brief Selects the condition for the system to enter low power mode.
+ * @param LowPowerMode: Specifies the new mode for the system to enter low power mode.
+ * This parameter can be one of the following values:
+ * @arg NVIC_LP_SEVONPEND
+ * @arg NVIC_LP_SLEEPDEEP
+ * @arg NVIC_LP_SLEEPONEXIT
+ * @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_LP(LowPowerMode));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ SCB->SCR |= LowPowerMode;
+ }
+ else
+ {
+ SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode);
+ }
+}
+
+/**
+ * @brief Configures the SysTick clock source.
+ * @param SysTick_CLKSource: specifies the SysTick clock source.
+ * This parameter can be one of the following values:
+ * @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source.
+ * @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source.
+ * @retval None
+ */
+void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource));
+ if (SysTick_CLKSource == SysTick_CLKSource_HCLK)
+ {
+ SysTick->CTRL |= SysTick_CLKSource_HCLK;
+ }
+ else
+ {
+ SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8;
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_adc.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_adc.c
new file mode 100644
index 00000000..916a096d
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_adc.c
@@ -0,0 +1,1307 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_adc.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the ADC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_adc.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup ADC
+ * @brief ADC driver modules
+ * @{
+ */
+
+/** @defgroup ADC_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Private_Defines
+ * @{
+ */
+
+/* ADC DISCNUM mask */
+#define CR1_DISCNUM_Reset ((uint32_t)0xFFFF1FFF)
+
+/* ADC DISCEN mask */
+#define CR1_DISCEN_Set ((uint32_t)0x00000800)
+#define CR1_DISCEN_Reset ((uint32_t)0xFFFFF7FF)
+
+/* ADC JAUTO mask */
+#define CR1_JAUTO_Set ((uint32_t)0x00000400)
+#define CR1_JAUTO_Reset ((uint32_t)0xFFFFFBFF)
+
+/* ADC JDISCEN mask */
+#define CR1_JDISCEN_Set ((uint32_t)0x00001000)
+#define CR1_JDISCEN_Reset ((uint32_t)0xFFFFEFFF)
+
+/* ADC AWDCH mask */
+#define CR1_AWDCH_Reset ((uint32_t)0xFFFFFFE0)
+
+/* ADC Analog watchdog enable mode mask */
+#define CR1_AWDMode_Reset ((uint32_t)0xFF3FFDFF)
+
+/* CR1 register Mask */
+#define CR1_CLEAR_Mask ((uint32_t)0xFFF0FEFF)
+
+/* ADC ADON mask */
+#define CR2_ADON_Set ((uint32_t)0x00000001)
+#define CR2_ADON_Reset ((uint32_t)0xFFFFFFFE)
+
+/* ADC DMA mask */
+#define CR2_DMA_Set ((uint32_t)0x00000100)
+#define CR2_DMA_Reset ((uint32_t)0xFFFFFEFF)
+
+/* ADC RSTCAL mask */
+#define CR2_RSTCAL_Set ((uint32_t)0x00000008)
+
+/* ADC CAL mask */
+#define CR2_CAL_Set ((uint32_t)0x00000004)
+
+/* ADC SWSTART mask */
+#define CR2_SWSTART_Set ((uint32_t)0x00400000)
+
+/* ADC EXTTRIG mask */
+#define CR2_EXTTRIG_Set ((uint32_t)0x00100000)
+#define CR2_EXTTRIG_Reset ((uint32_t)0xFFEFFFFF)
+
+/* ADC Software start mask */
+#define CR2_EXTTRIG_SWSTART_Set ((uint32_t)0x00500000)
+#define CR2_EXTTRIG_SWSTART_Reset ((uint32_t)0xFFAFFFFF)
+
+/* ADC JEXTSEL mask */
+#define CR2_JEXTSEL_Reset ((uint32_t)0xFFFF8FFF)
+
+/* ADC JEXTTRIG mask */
+#define CR2_JEXTTRIG_Set ((uint32_t)0x00008000)
+#define CR2_JEXTTRIG_Reset ((uint32_t)0xFFFF7FFF)
+
+/* ADC JSWSTART mask */
+#define CR2_JSWSTART_Set ((uint32_t)0x00200000)
+
+/* ADC injected software start mask */
+#define CR2_JEXTTRIG_JSWSTART_Set ((uint32_t)0x00208000)
+#define CR2_JEXTTRIG_JSWSTART_Reset ((uint32_t)0xFFDF7FFF)
+
+/* ADC TSPD mask */
+#define CR2_TSVREFE_Set ((uint32_t)0x00800000)
+#define CR2_TSVREFE_Reset ((uint32_t)0xFF7FFFFF)
+
+/* CR2 register Mask */
+#define CR2_CLEAR_Mask ((uint32_t)0xFFF1F7FD)
+
+/* ADC SQx mask */
+#define SQR3_SQ_Set ((uint32_t)0x0000001F)
+#define SQR2_SQ_Set ((uint32_t)0x0000001F)
+#define SQR1_SQ_Set ((uint32_t)0x0000001F)
+
+/* SQR1 register Mask */
+#define SQR1_CLEAR_Mask ((uint32_t)0xFF0FFFFF)
+
+/* ADC JSQx mask */
+#define JSQR_JSQ_Set ((uint32_t)0x0000001F)
+
+/* ADC JL mask */
+#define JSQR_JL_Set ((uint32_t)0x00300000)
+#define JSQR_JL_Reset ((uint32_t)0xFFCFFFFF)
+
+/* ADC SMPx mask */
+#define SMPR1_SMP_Set ((uint32_t)0x00000007)
+#define SMPR2_SMP_Set ((uint32_t)0x00000007)
+
+/* ADC JDRx registers offset */
+#define JDR_Offset ((uint8_t)0x28)
+
+/* ADC1 DR register base address */
+#define DR_ADDRESS ((uint32_t)0x4001244C)
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the ADCx peripheral registers to their default reset values.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval None
+ */
+void ADC_DeInit(ADC_TypeDef* ADCx)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+
+ if (ADCx == ADC1)
+ {
+ /* Enable ADC1 reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, ENABLE);
+ /* Release ADC1 from reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, DISABLE);
+ }
+ else if (ADCx == ADC2)
+ {
+ /* Enable ADC2 reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, ENABLE);
+ /* Release ADC2 from reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, DISABLE);
+ }
+ else
+ {
+ if (ADCx == ADC3)
+ {
+ /* Enable ADC3 reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, ENABLE);
+ /* Release ADC3 from reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, DISABLE);
+ }
+ }
+}
+
+/**
+ * @brief Initializes the ADCx peripheral according to the specified parameters
+ * in the ADC_InitStruct.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure that contains
+ * the configuration information for the specified ADC peripheral.
+ * @retval None
+ */
+void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct)
+{
+ uint32_t tmpreg1 = 0;
+ uint8_t tmpreg2 = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_MODE(ADC_InitStruct->ADC_Mode));
+ assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ScanConvMode));
+ assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ContinuousConvMode));
+ assert_param(IS_ADC_EXT_TRIG(ADC_InitStruct->ADC_ExternalTrigConv));
+ assert_param(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign));
+ assert_param(IS_ADC_REGULAR_LENGTH(ADC_InitStruct->ADC_NbrOfChannel));
+
+ /*---------------------------- ADCx CR1 Configuration -----------------*/
+ /* Get the ADCx CR1 value */
+ tmpreg1 = ADCx->CR1;
+ /* Clear DUALMOD and SCAN bits */
+ tmpreg1 &= CR1_CLEAR_Mask;
+ /* Configure ADCx: Dual mode and scan conversion mode */
+ /* Set DUALMOD bits according to ADC_Mode value */
+ /* Set SCAN bit according to ADC_ScanConvMode value */
+ tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_Mode | ((uint32_t)ADC_InitStruct->ADC_ScanConvMode << 8));
+ /* Write to ADCx CR1 */
+ ADCx->CR1 = tmpreg1;
+
+ /*---------------------------- ADCx CR2 Configuration -----------------*/
+ /* Get the ADCx CR2 value */
+ tmpreg1 = ADCx->CR2;
+ /* Clear CONT, ALIGN and EXTSEL bits */
+ tmpreg1 &= CR2_CLEAR_Mask;
+ /* Configure ADCx: external trigger event and continuous conversion mode */
+ /* Set ALIGN bit according to ADC_DataAlign value */
+ /* Set EXTSEL bits according to ADC_ExternalTrigConv value */
+ /* Set CONT bit according to ADC_ContinuousConvMode value */
+ tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ExternalTrigConv |
+ ((uint32_t)ADC_InitStruct->ADC_ContinuousConvMode << 1));
+ /* Write to ADCx CR2 */
+ ADCx->CR2 = tmpreg1;
+
+ /*---------------------------- ADCx SQR1 Configuration -----------------*/
+ /* Get the ADCx SQR1 value */
+ tmpreg1 = ADCx->SQR1;
+ /* Clear L bits */
+ tmpreg1 &= SQR1_CLEAR_Mask;
+ /* Configure ADCx: regular channel sequence length */
+ /* Set L bits according to ADC_NbrOfChannel value */
+ tmpreg2 |= (uint8_t) (ADC_InitStruct->ADC_NbrOfChannel - (uint8_t)1);
+ tmpreg1 |= (uint32_t)tmpreg2 << 20;
+ /* Write to ADCx SQR1 */
+ ADCx->SQR1 = tmpreg1;
+}
+
+/**
+ * @brief Fills each ADC_InitStruct member with its default value.
+ * @param ADC_InitStruct : pointer to an ADC_InitTypeDef structure which will be initialized.
+ * @retval None
+ */
+void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct)
+{
+ /* Reset ADC init structure parameters values */
+ /* Initialize the ADC_Mode member */
+ ADC_InitStruct->ADC_Mode = ADC_Mode_Independent;
+ /* initialize the ADC_ScanConvMode member */
+ ADC_InitStruct->ADC_ScanConvMode = DISABLE;
+ /* Initialize the ADC_ContinuousConvMode member */
+ ADC_InitStruct->ADC_ContinuousConvMode = DISABLE;
+ /* Initialize the ADC_ExternalTrigConv member */
+ ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1;
+ /* Initialize the ADC_DataAlign member */
+ ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right;
+ /* Initialize the ADC_NbrOfChannel member */
+ ADC_InitStruct->ADC_NbrOfChannel = 1;
+}
+
+/**
+ * @brief Enables or disables the specified ADC peripheral.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the ADCx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the ADON bit to wake up the ADC from power down mode */
+ ADCx->CR2 |= CR2_ADON_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC peripheral */
+ ADCx->CR2 &= CR2_ADON_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified ADC DMA request.
+ * @param ADCx: where x can be 1 or 3 to select the ADC peripheral.
+ * Note: ADC2 hasn't a DMA capability.
+ * @param NewState: new state of the selected ADC DMA transfer.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_DMA_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC DMA request */
+ ADCx->CR2 |= CR2_DMA_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC DMA request */
+ ADCx->CR2 &= CR2_DMA_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified ADC interrupts.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_IT: specifies the ADC interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg ADC_IT_EOC: End of conversion interrupt mask
+ * @arg ADC_IT_AWD: Analog watchdog interrupt mask
+ * @arg ADC_IT_JEOC: End of injected conversion interrupt mask
+ * @param NewState: new state of the specified ADC interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState)
+{
+ uint8_t itmask = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ assert_param(IS_ADC_IT(ADC_IT));
+ /* Get the ADC IT index */
+ itmask = (uint8_t)ADC_IT;
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC interrupts */
+ ADCx->CR1 |= itmask;
+ }
+ else
+ {
+ /* Disable the selected ADC interrupts */
+ ADCx->CR1 &= (~(uint32_t)itmask);
+ }
+}
+
+/**
+ * @brief Resets the selected ADC calibration registers.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval None
+ */
+void ADC_ResetCalibration(ADC_TypeDef* ADCx)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Resets the selected ADC calibration registers */
+ ADCx->CR2 |= CR2_RSTCAL_Set;
+}
+
+/**
+ * @brief Gets the selected ADC reset calibration registers status.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval The new state of ADC reset calibration registers (SET or RESET).
+ */
+FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Check the status of RSTCAL bit */
+ if ((ADCx->CR2 & CR2_RSTCAL_Set) != (uint32_t)RESET)
+ {
+ /* RSTCAL bit is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* RSTCAL bit is reset */
+ bitstatus = RESET;
+ }
+ /* Return the RSTCAL bit status */
+ return bitstatus;
+}
+
+/**
+ * @brief Starts the selected ADC calibration process.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval None
+ */
+void ADC_StartCalibration(ADC_TypeDef* ADCx)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Enable the selected ADC calibration process */
+ ADCx->CR2 |= CR2_CAL_Set;
+}
+
+/**
+ * @brief Gets the selected ADC calibration status.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval The new state of ADC calibration (SET or RESET).
+ */
+FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Check the status of CAL bit */
+ if ((ADCx->CR2 & CR2_CAL_Set) != (uint32_t)RESET)
+ {
+ /* CAL bit is set: calibration on going */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CAL bit is reset: end of calibration */
+ bitstatus = RESET;
+ }
+ /* Return the CAL bit status */
+ return bitstatus;
+}
+
+/**
+ * @brief Enables or disables the selected ADC software start conversion .
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC software start conversion.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC conversion on external event and start the selected
+ ADC conversion */
+ ADCx->CR2 |= CR2_EXTTRIG_SWSTART_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC conversion on external event and stop the selected
+ ADC conversion */
+ ADCx->CR2 &= CR2_EXTTRIG_SWSTART_Reset;
+ }
+}
+
+/**
+ * @brief Gets the selected ADC Software start conversion Status.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval The new state of ADC software start conversion (SET or RESET).
+ */
+FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Check the status of SWSTART bit */
+ if ((ADCx->CR2 & CR2_SWSTART_Set) != (uint32_t)RESET)
+ {
+ /* SWSTART bit is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* SWSTART bit is reset */
+ bitstatus = RESET;
+ }
+ /* Return the SWSTART bit status */
+ return bitstatus;
+}
+
+/**
+ * @brief Configures the discontinuous mode for the selected ADC regular
+ * group channel.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param Number: specifies the discontinuous mode regular channel
+ * count value. This number must be between 1 and 8.
+ * @retval None
+ */
+void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number)
+{
+ uint32_t tmpreg1 = 0;
+ uint32_t tmpreg2 = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_REGULAR_DISC_NUMBER(Number));
+ /* Get the old register value */
+ tmpreg1 = ADCx->CR1;
+ /* Clear the old discontinuous mode channel count */
+ tmpreg1 &= CR1_DISCNUM_Reset;
+ /* Set the discontinuous mode channel count */
+ tmpreg2 = Number - 1;
+ tmpreg1 |= tmpreg2 << 13;
+ /* Store the new register value */
+ ADCx->CR1 = tmpreg1;
+}
+
+/**
+ * @brief Enables or disables the discontinuous mode on regular group
+ * channel for the specified ADC
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC discontinuous mode
+ * on regular group channel.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC regular discontinuous mode */
+ ADCx->CR1 |= CR1_DISCEN_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC regular discontinuous mode */
+ ADCx->CR1 &= CR1_DISCEN_Reset;
+ }
+}
+
+/**
+ * @brief Configures for the selected ADC regular channel its corresponding
+ * rank in the sequencer and its sample time.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_Channel: the ADC channel to configure.
+ * This parameter can be one of the following values:
+ * @arg ADC_Channel_0: ADC Channel0 selected
+ * @arg ADC_Channel_1: ADC Channel1 selected
+ * @arg ADC_Channel_2: ADC Channel2 selected
+ * @arg ADC_Channel_3: ADC Channel3 selected
+ * @arg ADC_Channel_4: ADC Channel4 selected
+ * @arg ADC_Channel_5: ADC Channel5 selected
+ * @arg ADC_Channel_6: ADC Channel6 selected
+ * @arg ADC_Channel_7: ADC Channel7 selected
+ * @arg ADC_Channel_8: ADC Channel8 selected
+ * @arg ADC_Channel_9: ADC Channel9 selected
+ * @arg ADC_Channel_10: ADC Channel10 selected
+ * @arg ADC_Channel_11: ADC Channel11 selected
+ * @arg ADC_Channel_12: ADC Channel12 selected
+ * @arg ADC_Channel_13: ADC Channel13 selected
+ * @arg ADC_Channel_14: ADC Channel14 selected
+ * @arg ADC_Channel_15: ADC Channel15 selected
+ * @arg ADC_Channel_16: ADC Channel16 selected
+ * @arg ADC_Channel_17: ADC Channel17 selected
+ * @param Rank: The rank in the regular group sequencer. This parameter must be between 1 to 16.
+ * @param ADC_SampleTime: The sample time value to be set for the selected channel.
+ * This parameter can be one of the following values:
+ * @arg ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles
+ * @arg ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles
+ * @arg ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles
+ * @arg ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles
+ * @arg ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles
+ * @arg ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles
+ * @arg ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles
+ * @arg ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles
+ * @retval None
+ */
+void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
+{
+ uint32_t tmpreg1 = 0, tmpreg2 = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_CHANNEL(ADC_Channel));
+ assert_param(IS_ADC_REGULAR_RANK(Rank));
+ assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime));
+ /* if ADC_Channel_10 ... ADC_Channel_17 is selected */
+ if (ADC_Channel > ADC_Channel_9)
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SMPR1;
+ /* Calculate the mask to clear */
+ tmpreg2 = SMPR1_SMP_Set << (3 * (ADC_Channel - 10));
+ /* Clear the old channel sample time */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 10));
+ /* Set the new channel sample time */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SMPR1 = tmpreg1;
+ }
+ else /* ADC_Channel include in ADC_Channel_[0..9] */
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SMPR2;
+ /* Calculate the mask to clear */
+ tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel);
+ /* Clear the old channel sample time */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel);
+ /* Set the new channel sample time */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SMPR2 = tmpreg1;
+ }
+ /* For Rank 1 to 6 */
+ if (Rank < 7)
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SQR3;
+ /* Calculate the mask to clear */
+ tmpreg2 = SQR3_SQ_Set << (5 * (Rank - 1));
+ /* Clear the old SQx bits for the selected rank */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 1));
+ /* Set the SQx bits for the selected rank */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SQR3 = tmpreg1;
+ }
+ /* For Rank 7 to 12 */
+ else if (Rank < 13)
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SQR2;
+ /* Calculate the mask to clear */
+ tmpreg2 = SQR2_SQ_Set << (5 * (Rank - 7));
+ /* Clear the old SQx bits for the selected rank */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 7));
+ /* Set the SQx bits for the selected rank */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SQR2 = tmpreg1;
+ }
+ /* For Rank 13 to 16 */
+ else
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SQR1;
+ /* Calculate the mask to clear */
+ tmpreg2 = SQR1_SQ_Set << (5 * (Rank - 13));
+ /* Clear the old SQx bits for the selected rank */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 13));
+ /* Set the SQx bits for the selected rank */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SQR1 = tmpreg1;
+ }
+}
+
+/**
+ * @brief Enables or disables the ADCx conversion through external trigger.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC external trigger start of conversion.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC conversion on external event */
+ ADCx->CR2 |= CR2_EXTTRIG_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC conversion on external event */
+ ADCx->CR2 &= CR2_EXTTRIG_Reset;
+ }
+}
+
+/**
+ * @brief Returns the last ADCx conversion result data for regular channel.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval The Data conversion value.
+ */
+uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Return the selected ADC conversion value */
+ return (uint16_t) ADCx->DR;
+}
+
+/**
+ * @brief Returns the last ADC1 and ADC2 conversion result data in dual mode.
+ * @retval The Data conversion value.
+ */
+uint32_t ADC_GetDualModeConversionValue(void)
+{
+ /* Return the dual mode conversion value */
+ return (*(__IO uint32_t *) DR_ADDRESS);
+}
+
+/**
+ * @brief Enables or disables the selected ADC automatic injected group
+ * conversion after regular one.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC auto injected conversion
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC automatic injected group conversion */
+ ADCx->CR1 |= CR1_JAUTO_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC automatic injected group conversion */
+ ADCx->CR1 &= CR1_JAUTO_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the discontinuous mode for injected group
+ * channel for the specified ADC
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC discontinuous mode
+ * on injected group channel.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC injected discontinuous mode */
+ ADCx->CR1 |= CR1_JDISCEN_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC injected discontinuous mode */
+ ADCx->CR1 &= CR1_JDISCEN_Reset;
+ }
+}
+
+/**
+ * @brief Configures the ADCx external trigger for injected channels conversion.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_ExternalTrigInjecConv: specifies the ADC trigger to start injected conversion.
+ * This parameter can be one of the following values:
+ * @arg ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event selected (for ADC1, ADC2 and ADC3)
+ * @arg ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture compare4 selected (for ADC1, ADC2 and ADC3)
+ * @arg ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event selected (for ADC1 and ADC2)
+ * @arg ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture compare1 selected (for ADC1 and ADC2)
+ * @arg ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture compare4 selected (for ADC1 and ADC2)
+ * @arg ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event selected (for ADC1 and ADC2)
+ * @arg ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4: External interrupt line 15 or Timer8
+ * capture compare4 event selected (for ADC1 and ADC2)
+ * @arg ADC_ExternalTrigInjecConv_T4_CC3: Timer4 capture compare3 selected (for ADC3 only)
+ * @arg ADC_ExternalTrigInjecConv_T8_CC2: Timer8 capture compare2 selected (for ADC3 only)
+ * @arg ADC_ExternalTrigInjecConv_T8_CC4: Timer8 capture compare4 selected (for ADC3 only)
+ * @arg ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event selected (for ADC3 only)
+ * @arg ADC_ExternalTrigInjecConv_T5_CC4: Timer5 capture compare4 selected (for ADC3 only)
+ * @arg ADC_ExternalTrigInjecConv_None: Injected conversion started by software and not
+ * by external trigger (for ADC1, ADC2 and ADC3)
+ * @retval None
+ */
+void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_EXT_INJEC_TRIG(ADC_ExternalTrigInjecConv));
+ /* Get the old register value */
+ tmpreg = ADCx->CR2;
+ /* Clear the old external event selection for injected group */
+ tmpreg &= CR2_JEXTSEL_Reset;
+ /* Set the external event selection for injected group */
+ tmpreg |= ADC_ExternalTrigInjecConv;
+ /* Store the new register value */
+ ADCx->CR2 = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the ADCx injected channels conversion through
+ * external trigger
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC external trigger start of
+ * injected conversion.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC external event selection for injected group */
+ ADCx->CR2 |= CR2_JEXTTRIG_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC external event selection for injected group */
+ ADCx->CR2 &= CR2_JEXTTRIG_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the selected ADC start of the injected
+ * channels conversion.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC software start injected conversion.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC conversion for injected group on external event and start the selected
+ ADC injected conversion */
+ ADCx->CR2 |= CR2_JEXTTRIG_JSWSTART_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC conversion on external event for injected group and stop the selected
+ ADC injected conversion */
+ ADCx->CR2 &= CR2_JEXTTRIG_JSWSTART_Reset;
+ }
+}
+
+/**
+ * @brief Gets the selected ADC Software start injected conversion Status.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval The new state of ADC software start injected conversion (SET or RESET).
+ */
+FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Check the status of JSWSTART bit */
+ if ((ADCx->CR2 & CR2_JSWSTART_Set) != (uint32_t)RESET)
+ {
+ /* JSWSTART bit is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* JSWSTART bit is reset */
+ bitstatus = RESET;
+ }
+ /* Return the JSWSTART bit status */
+ return bitstatus;
+}
+
+/**
+ * @brief Configures for the selected ADC injected channel its corresponding
+ * rank in the sequencer and its sample time.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_Channel: the ADC channel to configure.
+ * This parameter can be one of the following values:
+ * @arg ADC_Channel_0: ADC Channel0 selected
+ * @arg ADC_Channel_1: ADC Channel1 selected
+ * @arg ADC_Channel_2: ADC Channel2 selected
+ * @arg ADC_Channel_3: ADC Channel3 selected
+ * @arg ADC_Channel_4: ADC Channel4 selected
+ * @arg ADC_Channel_5: ADC Channel5 selected
+ * @arg ADC_Channel_6: ADC Channel6 selected
+ * @arg ADC_Channel_7: ADC Channel7 selected
+ * @arg ADC_Channel_8: ADC Channel8 selected
+ * @arg ADC_Channel_9: ADC Channel9 selected
+ * @arg ADC_Channel_10: ADC Channel10 selected
+ * @arg ADC_Channel_11: ADC Channel11 selected
+ * @arg ADC_Channel_12: ADC Channel12 selected
+ * @arg ADC_Channel_13: ADC Channel13 selected
+ * @arg ADC_Channel_14: ADC Channel14 selected
+ * @arg ADC_Channel_15: ADC Channel15 selected
+ * @arg ADC_Channel_16: ADC Channel16 selected
+ * @arg ADC_Channel_17: ADC Channel17 selected
+ * @param Rank: The rank in the injected group sequencer. This parameter must be between 1 and 4.
+ * @param ADC_SampleTime: The sample time value to be set for the selected channel.
+ * This parameter can be one of the following values:
+ * @arg ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles
+ * @arg ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles
+ * @arg ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles
+ * @arg ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles
+ * @arg ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles
+ * @arg ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles
+ * @arg ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles
+ * @arg ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles
+ * @retval None
+ */
+void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
+{
+ uint32_t tmpreg1 = 0, tmpreg2 = 0, tmpreg3 = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_CHANNEL(ADC_Channel));
+ assert_param(IS_ADC_INJECTED_RANK(Rank));
+ assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime));
+ /* if ADC_Channel_10 ... ADC_Channel_17 is selected */
+ if (ADC_Channel > ADC_Channel_9)
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SMPR1;
+ /* Calculate the mask to clear */
+ tmpreg2 = SMPR1_SMP_Set << (3*(ADC_Channel - 10));
+ /* Clear the old channel sample time */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_SampleTime << (3*(ADC_Channel - 10));
+ /* Set the new channel sample time */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SMPR1 = tmpreg1;
+ }
+ else /* ADC_Channel include in ADC_Channel_[0..9] */
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SMPR2;
+ /* Calculate the mask to clear */
+ tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel);
+ /* Clear the old channel sample time */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel);
+ /* Set the new channel sample time */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SMPR2 = tmpreg1;
+ }
+ /* Rank configuration */
+ /* Get the old register value */
+ tmpreg1 = ADCx->JSQR;
+ /* Get JL value: Number = JL+1 */
+ tmpreg3 = (tmpreg1 & JSQR_JL_Set)>> 20;
+ /* Calculate the mask to clear: ((Rank-1)+(4-JL-1)) */
+ tmpreg2 = JSQR_JSQ_Set << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1)));
+ /* Clear the old JSQx bits for the selected rank */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set: ((Rank-1)+(4-JL-1)) */
+ tmpreg2 = (uint32_t)ADC_Channel << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1)));
+ /* Set the JSQx bits for the selected rank */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->JSQR = tmpreg1;
+}
+
+/**
+ * @brief Configures the sequencer length for injected channels
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param Length: The sequencer length.
+ * This parameter must be a number between 1 to 4.
+ * @retval None
+ */
+void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length)
+{
+ uint32_t tmpreg1 = 0;
+ uint32_t tmpreg2 = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_INJECTED_LENGTH(Length));
+
+ /* Get the old register value */
+ tmpreg1 = ADCx->JSQR;
+ /* Clear the old injected sequnence lenght JL bits */
+ tmpreg1 &= JSQR_JL_Reset;
+ /* Set the injected sequnence lenght JL bits */
+ tmpreg2 = Length - 1;
+ tmpreg1 |= tmpreg2 << 20;
+ /* Store the new register value */
+ ADCx->JSQR = tmpreg1;
+}
+
+/**
+ * @brief Set the injected channels conversion value offset
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_InjectedChannel: the ADC injected channel to set its offset.
+ * This parameter can be one of the following values:
+ * @arg ADC_InjectedChannel_1: Injected Channel1 selected
+ * @arg ADC_InjectedChannel_2: Injected Channel2 selected
+ * @arg ADC_InjectedChannel_3: Injected Channel3 selected
+ * @arg ADC_InjectedChannel_4: Injected Channel4 selected
+ * @param Offset: the offset value for the selected ADC injected channel
+ * This parameter must be a 12bit value.
+ * @retval None
+ */
+void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel));
+ assert_param(IS_ADC_OFFSET(Offset));
+
+ tmp = (uint32_t)ADCx;
+ tmp += ADC_InjectedChannel;
+
+ /* Set the selected injected channel data offset */
+ *(__IO uint32_t *) tmp = (uint32_t)Offset;
+}
+
+/**
+ * @brief Returns the ADC injected channel conversion result
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_InjectedChannel: the converted ADC injected channel.
+ * This parameter can be one of the following values:
+ * @arg ADC_InjectedChannel_1: Injected Channel1 selected
+ * @arg ADC_InjectedChannel_2: Injected Channel2 selected
+ * @arg ADC_InjectedChannel_3: Injected Channel3 selected
+ * @arg ADC_InjectedChannel_4: Injected Channel4 selected
+ * @retval The Data conversion value.
+ */
+uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel));
+
+ tmp = (uint32_t)ADCx;
+ tmp += ADC_InjectedChannel + JDR_Offset;
+
+ /* Returns the selected injected channel conversion data value */
+ return (uint16_t) (*(__IO uint32_t*) tmp);
+}
+
+/**
+ * @brief Enables or disables the analog watchdog on single/all regular
+ * or injected channels
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_AnalogWatchdog: the ADC analog watchdog configuration.
+ * This parameter can be one of the following values:
+ * @arg ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on a single regular channel
+ * @arg ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on a single injected channel
+ * @arg ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog watchdog on a single regular or injected channel
+ * @arg ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on all regular channel
+ * @arg ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on all injected channel
+ * @arg ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog on all regular and injected channels
+ * @arg ADC_AnalogWatchdog_None: No channel guarded by the analog watchdog
+ * @retval None
+ */
+void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_ANALOG_WATCHDOG(ADC_AnalogWatchdog));
+ /* Get the old register value */
+ tmpreg = ADCx->CR1;
+ /* Clear AWDEN, AWDENJ and AWDSGL bits */
+ tmpreg &= CR1_AWDMode_Reset;
+ /* Set the analog watchdog enable mode */
+ tmpreg |= ADC_AnalogWatchdog;
+ /* Store the new register value */
+ ADCx->CR1 = tmpreg;
+}
+
+/**
+ * @brief Configures the high and low thresholds of the analog watchdog.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param HighThreshold: the ADC analog watchdog High threshold value.
+ * This parameter must be a 12bit value.
+ * @param LowThreshold: the ADC analog watchdog Low threshold value.
+ * This parameter must be a 12bit value.
+ * @retval None
+ */
+void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold,
+ uint16_t LowThreshold)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_THRESHOLD(HighThreshold));
+ assert_param(IS_ADC_THRESHOLD(LowThreshold));
+ /* Set the ADCx high threshold */
+ ADCx->HTR = HighThreshold;
+ /* Set the ADCx low threshold */
+ ADCx->LTR = LowThreshold;
+}
+
+/**
+ * @brief Configures the analog watchdog guarded single channel
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_Channel: the ADC channel to configure for the analog watchdog.
+ * This parameter can be one of the following values:
+ * @arg ADC_Channel_0: ADC Channel0 selected
+ * @arg ADC_Channel_1: ADC Channel1 selected
+ * @arg ADC_Channel_2: ADC Channel2 selected
+ * @arg ADC_Channel_3: ADC Channel3 selected
+ * @arg ADC_Channel_4: ADC Channel4 selected
+ * @arg ADC_Channel_5: ADC Channel5 selected
+ * @arg ADC_Channel_6: ADC Channel6 selected
+ * @arg ADC_Channel_7: ADC Channel7 selected
+ * @arg ADC_Channel_8: ADC Channel8 selected
+ * @arg ADC_Channel_9: ADC Channel9 selected
+ * @arg ADC_Channel_10: ADC Channel10 selected
+ * @arg ADC_Channel_11: ADC Channel11 selected
+ * @arg ADC_Channel_12: ADC Channel12 selected
+ * @arg ADC_Channel_13: ADC Channel13 selected
+ * @arg ADC_Channel_14: ADC Channel14 selected
+ * @arg ADC_Channel_15: ADC Channel15 selected
+ * @arg ADC_Channel_16: ADC Channel16 selected
+ * @arg ADC_Channel_17: ADC Channel17 selected
+ * @retval None
+ */
+void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_CHANNEL(ADC_Channel));
+ /* Get the old register value */
+ tmpreg = ADCx->CR1;
+ /* Clear the Analog watchdog channel select bits */
+ tmpreg &= CR1_AWDCH_Reset;
+ /* Set the Analog watchdog channel */
+ tmpreg |= ADC_Channel;
+ /* Store the new register value */
+ ADCx->CR1 = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the temperature sensor and Vrefint channel.
+ * @param NewState: new state of the temperature sensor.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_TempSensorVrefintCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the temperature sensor and Vrefint channel*/
+ ADC1->CR2 |= CR2_TSVREFE_Set;
+ }
+ else
+ {
+ /* Disable the temperature sensor and Vrefint channel*/
+ ADC1->CR2 &= CR2_TSVREFE_Reset;
+ }
+}
+
+/**
+ * @brief Checks whether the specified ADC flag is set or not.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg ADC_FLAG_AWD: Analog watchdog flag
+ * @arg ADC_FLAG_EOC: End of conversion flag
+ * @arg ADC_FLAG_JEOC: End of injected group conversion flag
+ * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag
+ * @arg ADC_FLAG_STRT: Start of regular group conversion flag
+ * @retval The new state of ADC_FLAG (SET or RESET).
+ */
+FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_GET_FLAG(ADC_FLAG));
+ /* Check the status of the specified ADC flag */
+ if ((ADCx->SR & ADC_FLAG) != (uint8_t)RESET)
+ {
+ /* ADC_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* ADC_FLAG is reset */
+ bitstatus = RESET;
+ }
+ /* Return the ADC_FLAG status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the ADCx's pending flags.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_FLAG: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg ADC_FLAG_AWD: Analog watchdog flag
+ * @arg ADC_FLAG_EOC: End of conversion flag
+ * @arg ADC_FLAG_JEOC: End of injected group conversion flag
+ * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag
+ * @arg ADC_FLAG_STRT: Start of regular group conversion flag
+ * @retval None
+ */
+void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_CLEAR_FLAG(ADC_FLAG));
+ /* Clear the selected ADC flags */
+ ADCx->SR = ~(uint32_t)ADC_FLAG;
+}
+
+/**
+ * @brief Checks whether the specified ADC interrupt has occurred or not.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_IT: specifies the ADC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg ADC_IT_EOC: End of conversion interrupt mask
+ * @arg ADC_IT_AWD: Analog watchdog interrupt mask
+ * @arg ADC_IT_JEOC: End of injected conversion interrupt mask
+ * @retval The new state of ADC_IT (SET or RESET).
+ */
+ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t itmask = 0, enablestatus = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_GET_IT(ADC_IT));
+ /* Get the ADC IT index */
+ itmask = ADC_IT >> 8;
+ /* Get the ADC_IT enable bit status */
+ enablestatus = (ADCx->CR1 & (uint8_t)ADC_IT) ;
+ /* Check the status of the specified ADC interrupt */
+ if (((ADCx->SR & itmask) != (uint32_t)RESET) && enablestatus)
+ {
+ /* ADC_IT is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* ADC_IT is reset */
+ bitstatus = RESET;
+ }
+ /* Return the ADC_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the ADCx's interrupt pending bits.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_IT: specifies the ADC interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg ADC_IT_EOC: End of conversion interrupt mask
+ * @arg ADC_IT_AWD: Analog watchdog interrupt mask
+ * @arg ADC_IT_JEOC: End of injected conversion interrupt mask
+ * @retval None
+ */
+void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT)
+{
+ uint8_t itmask = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_IT(ADC_IT));
+ /* Get the ADC IT index */
+ itmask = (uint8_t)(ADC_IT >> 8);
+ /* Clear the selected ADC interrupt pending bits */
+ ADCx->SR = ~(uint32_t)itmask;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_bkp.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_bkp.c
new file mode 100644
index 00000000..3004b9ef
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_bkp.c
@@ -0,0 +1,308 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_bkp.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the BKP firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_bkp.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup BKP
+ * @brief BKP driver modules
+ * @{
+ */
+
+/** @defgroup BKP_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Private_Defines
+ * @{
+ */
+
+/* ------------ BKP registers bit address in the alias region --------------- */
+#define BKP_OFFSET (BKP_BASE - PERIPH_BASE)
+
+/* --- CR Register ----*/
+
+/* Alias word address of TPAL bit */
+#define CR_OFFSET (BKP_OFFSET + 0x30)
+#define TPAL_BitNumber 0x01
+#define CR_TPAL_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPAL_BitNumber * 4))
+
+/* Alias word address of TPE bit */
+#define TPE_BitNumber 0x00
+#define CR_TPE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPE_BitNumber * 4))
+
+/* --- CSR Register ---*/
+
+/* Alias word address of TPIE bit */
+#define CSR_OFFSET (BKP_OFFSET + 0x34)
+#define TPIE_BitNumber 0x02
+#define CSR_TPIE_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TPIE_BitNumber * 4))
+
+/* Alias word address of TIF bit */
+#define TIF_BitNumber 0x09
+#define CSR_TIF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TIF_BitNumber * 4))
+
+/* Alias word address of TEF bit */
+#define TEF_BitNumber 0x08
+#define CSR_TEF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEF_BitNumber * 4))
+
+/* ---------------------- BKP registers bit mask ------------------------ */
+
+/* RTCCR register bit mask */
+#define RTCCR_CAL_MASK ((uint16_t)0xFF80)
+#define RTCCR_MASK ((uint16_t)0xFC7F)
+
+/**
+ * @}
+ */
+
+
+/** @defgroup BKP_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the BKP peripheral registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void BKP_DeInit(void)
+{
+ RCC_BackupResetCmd(ENABLE);
+ RCC_BackupResetCmd(DISABLE);
+}
+
+/**
+ * @brief Configures the Tamper Pin active level.
+ * @param BKP_TamperPinLevel: specifies the Tamper Pin active level.
+ * This parameter can be one of the following values:
+ * @arg BKP_TamperPinLevel_High: Tamper pin active on high level
+ * @arg BKP_TamperPinLevel_Low: Tamper pin active on low level
+ * @retval None
+ */
+void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel)
+{
+ /* Check the parameters */
+ assert_param(IS_BKP_TAMPER_PIN_LEVEL(BKP_TamperPinLevel));
+ *(__IO uint32_t *) CR_TPAL_BB = BKP_TamperPinLevel;
+}
+
+/**
+ * @brief Enables or disables the Tamper Pin activation.
+ * @param NewState: new state of the Tamper Pin activation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void BKP_TamperPinCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_TPE_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enables or disables the Tamper Pin Interrupt.
+ * @param NewState: new state of the Tamper Pin Interrupt.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void BKP_ITConfig(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CSR_TPIE_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Select the RTC output source to output on the Tamper pin.
+ * @param BKP_RTCOutputSource: specifies the RTC output source.
+ * This parameter can be one of the following values:
+ * @arg BKP_RTCOutputSource_None: no RTC output on the Tamper pin.
+ * @arg BKP_RTCOutputSource_CalibClock: output the RTC clock with frequency
+ * divided by 64 on the Tamper pin.
+ * @arg BKP_RTCOutputSource_Alarm: output the RTC Alarm pulse signal on
+ * the Tamper pin.
+ * @arg BKP_RTCOutputSource_Second: output the RTC Second pulse signal on
+ * the Tamper pin.
+ * @retval None
+ */
+void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource)
+{
+ uint16_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_BKP_RTC_OUTPUT_SOURCE(BKP_RTCOutputSource));
+ tmpreg = BKP->RTCCR;
+ /* Clear CCO, ASOE and ASOS bits */
+ tmpreg &= RTCCR_MASK;
+
+ /* Set CCO, ASOE and ASOS bits according to BKP_RTCOutputSource value */
+ tmpreg |= BKP_RTCOutputSource;
+ /* Store the new value */
+ BKP->RTCCR = tmpreg;
+}
+
+/**
+ * @brief Sets RTC Clock Calibration value.
+ * @param CalibrationValue: specifies the RTC Clock Calibration value.
+ * This parameter must be a number between 0 and 0x7F.
+ * @retval None
+ */
+void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue)
+{
+ uint16_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_BKP_CALIBRATION_VALUE(CalibrationValue));
+ tmpreg = BKP->RTCCR;
+ /* Clear CAL[6:0] bits */
+ tmpreg &= RTCCR_CAL_MASK;
+ /* Set CAL[6:0] bits according to CalibrationValue value */
+ tmpreg |= CalibrationValue;
+ /* Store the new value */
+ BKP->RTCCR = tmpreg;
+}
+
+/**
+ * @brief Writes user data to the specified Data Backup Register.
+ * @param BKP_DR: specifies the Data Backup Register.
+ * This parameter can be BKP_DRx where x:[1, 42]
+ * @param Data: data to write
+ * @retval None
+ */
+void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_BKP_DR(BKP_DR));
+
+ tmp = (uint32_t)BKP_BASE;
+ tmp += BKP_DR;
+
+ *(__IO uint32_t *) tmp = Data;
+}
+
+/**
+ * @brief Reads data from the specified Data Backup Register.
+ * @param BKP_DR: specifies the Data Backup Register.
+ * This parameter can be BKP_DRx where x:[1, 42]
+ * @retval The content of the specified Data Backup Register
+ */
+uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_BKP_DR(BKP_DR));
+
+ tmp = (uint32_t)BKP_BASE;
+ tmp += BKP_DR;
+
+ return (*(__IO uint16_t *) tmp);
+}
+
+/**
+ * @brief Checks whether the Tamper Pin Event flag is set or not.
+ * @param None
+ * @retval The new state of the Tamper Pin Event flag (SET or RESET).
+ */
+FlagStatus BKP_GetFlagStatus(void)
+{
+ return (FlagStatus)(*(__IO uint32_t *) CSR_TEF_BB);
+}
+
+/**
+ * @brief Clears Tamper Pin Event pending flag.
+ * @param None
+ * @retval None
+ */
+void BKP_ClearFlag(void)
+{
+ /* Set CTE bit to clear Tamper Pin Event flag */
+ BKP->CSR |= BKP_CSR_CTE;
+}
+
+/**
+ * @brief Checks whether the Tamper Pin Interrupt has occurred or not.
+ * @param None
+ * @retval The new state of the Tamper Pin Interrupt (SET or RESET).
+ */
+ITStatus BKP_GetITStatus(void)
+{
+ return (ITStatus)(*(__IO uint32_t *) CSR_TIF_BB);
+}
+
+/**
+ * @brief Clears Tamper Pin Interrupt pending bit.
+ * @param None
+ * @retval None
+ */
+void BKP_ClearITPendingBit(void)
+{
+ /* Set CTI bit to clear Tamper Pin Interrupt pending bit */
+ BKP->CSR |= BKP_CSR_CTI;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_can.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_can.c
new file mode 100644
index 00000000..607d6924
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_can.c
@@ -0,0 +1,1415 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_can.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the CAN firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_can.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup CAN
+ * @brief CAN driver modules
+ * @{
+ */
+
+/** @defgroup CAN_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Private_Defines
+ * @{
+ */
+
+/* CAN Master Control Register bits */
+
+#define MCR_DBF ((uint32_t)0x00010000) /* software master reset */
+
+/* CAN Mailbox Transmit Request */
+#define TMIDxR_TXRQ ((uint32_t)0x00000001) /* Transmit mailbox request */
+
+/* CAN Filter Master Register bits */
+#define FMR_FINIT ((uint32_t)0x00000001) /* Filter init mode */
+
+/* Time out for INAK bit */
+#define INAK_TIMEOUT ((uint32_t)0x0000FFFF)
+/* Time out for SLAK bit */
+#define SLAK_TIMEOUT ((uint32_t)0x0000FFFF)
+
+
+
+/* Flags in TSR register */
+#define CAN_FLAGS_TSR ((uint32_t)0x08000000)
+/* Flags in RF1R register */
+#define CAN_FLAGS_RF1R ((uint32_t)0x04000000)
+/* Flags in RF0R register */
+#define CAN_FLAGS_RF0R ((uint32_t)0x02000000)
+/* Flags in MSR register */
+#define CAN_FLAGS_MSR ((uint32_t)0x01000000)
+/* Flags in ESR register */
+#define CAN_FLAGS_ESR ((uint32_t)0x00F00000)
+
+/* Mailboxes definition */
+#define CAN_TXMAILBOX_0 ((uint8_t)0x00)
+#define CAN_TXMAILBOX_1 ((uint8_t)0x01)
+#define CAN_TXMAILBOX_2 ((uint8_t)0x02)
+
+
+
+#define CAN_MODE_MASK ((uint32_t) 0x00000003)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Private_FunctionPrototypes
+ * @{
+ */
+
+static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit);
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the CAN peripheral registers to their default reset values.
+ * @param CANx: where x can be 1 or 2 to select the CAN peripheral.
+ * @retval None.
+ */
+void CAN_DeInit(CAN_TypeDef* CANx)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+
+ if (CANx == CAN1)
+ {
+ /* Enable CAN1 reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, ENABLE);
+ /* Release CAN1 from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, DISABLE);
+ }
+ else
+ {
+ /* Enable CAN2 reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, ENABLE);
+ /* Release CAN2 from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, DISABLE);
+ }
+}
+
+/**
+ * @brief Initializes the CAN peripheral according to the specified
+ * parameters in the CAN_InitStruct.
+ * @param CANx: where x can be 1 or 2 to to select the CAN
+ * peripheral.
+ * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure that
+ * contains the configuration information for the
+ * CAN peripheral.
+ * @retval Constant indicates initialization succeed which will be
+ * CAN_InitStatus_Failed or CAN_InitStatus_Success.
+ */
+uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct)
+{
+ uint8_t InitStatus = CAN_InitStatus_Failed;
+ uint32_t wait_ack = 0x00000000;
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TTCM));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_ABOM));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_AWUM));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_NART));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_RFLM));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TXFP));
+ assert_param(IS_CAN_MODE(CAN_InitStruct->CAN_Mode));
+ assert_param(IS_CAN_SJW(CAN_InitStruct->CAN_SJW));
+ assert_param(IS_CAN_BS1(CAN_InitStruct->CAN_BS1));
+ assert_param(IS_CAN_BS2(CAN_InitStruct->CAN_BS2));
+ assert_param(IS_CAN_PRESCALER(CAN_InitStruct->CAN_Prescaler));
+
+ /* Exit from sleep mode */
+ CANx->MCR &= (~(uint32_t)CAN_MCR_SLEEP);
+
+ /* Request initialisation */
+ CANx->MCR |= CAN_MCR_INRQ ;
+
+ /* Wait the acknowledge */
+ while (((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT))
+ {
+ wait_ack++;
+ }
+
+ /* Check acknowledge */
+ if ((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK)
+ {
+ InitStatus = CAN_InitStatus_Failed;
+ }
+ else
+ {
+ /* Set the time triggered communication mode */
+ if (CAN_InitStruct->CAN_TTCM == ENABLE)
+ {
+ CANx->MCR |= CAN_MCR_TTCM;
+ }
+ else
+ {
+ CANx->MCR &= ~(uint32_t)CAN_MCR_TTCM;
+ }
+
+ /* Set the automatic bus-off management */
+ if (CAN_InitStruct->CAN_ABOM == ENABLE)
+ {
+ CANx->MCR |= CAN_MCR_ABOM;
+ }
+ else
+ {
+ CANx->MCR &= ~(uint32_t)CAN_MCR_ABOM;
+ }
+
+ /* Set the automatic wake-up mode */
+ if (CAN_InitStruct->CAN_AWUM == ENABLE)
+ {
+ CANx->MCR |= CAN_MCR_AWUM;
+ }
+ else
+ {
+ CANx->MCR &= ~(uint32_t)CAN_MCR_AWUM;
+ }
+
+ /* Set the no automatic retransmission */
+ if (CAN_InitStruct->CAN_NART == ENABLE)
+ {
+ CANx->MCR |= CAN_MCR_NART;
+ }
+ else
+ {
+ CANx->MCR &= ~(uint32_t)CAN_MCR_NART;
+ }
+
+ /* Set the receive FIFO locked mode */
+ if (CAN_InitStruct->CAN_RFLM == ENABLE)
+ {
+ CANx->MCR |= CAN_MCR_RFLM;
+ }
+ else
+ {
+ CANx->MCR &= ~(uint32_t)CAN_MCR_RFLM;
+ }
+
+ /* Set the transmit FIFO priority */
+ if (CAN_InitStruct->CAN_TXFP == ENABLE)
+ {
+ CANx->MCR |= CAN_MCR_TXFP;
+ }
+ else
+ {
+ CANx->MCR &= ~(uint32_t)CAN_MCR_TXFP;
+ }
+
+ /* Set the bit timing register */
+ CANx->BTR = (uint32_t)((uint32_t)CAN_InitStruct->CAN_Mode << 30) | \
+ ((uint32_t)CAN_InitStruct->CAN_SJW << 24) | \
+ ((uint32_t)CAN_InitStruct->CAN_BS1 << 16) | \
+ ((uint32_t)CAN_InitStruct->CAN_BS2 << 20) | \
+ ((uint32_t)CAN_InitStruct->CAN_Prescaler - 1);
+
+ /* Request leave initialisation */
+ CANx->MCR &= ~(uint32_t)CAN_MCR_INRQ;
+
+ /* Wait the acknowledge */
+ wait_ack = 0;
+
+ while (((CANx->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT))
+ {
+ wait_ack++;
+ }
+
+ /* ...and check acknowledged */
+ if ((CANx->MSR & CAN_MSR_INAK) == CAN_MSR_INAK)
+ {
+ InitStatus = CAN_InitStatus_Failed;
+ }
+ else
+ {
+ InitStatus = CAN_InitStatus_Success ;
+ }
+ }
+
+ /* At this step, return the status of initialization */
+ return InitStatus;
+}
+
+/**
+ * @brief Initializes the CAN peripheral according to the specified
+ * parameters in the CAN_FilterInitStruct.
+ * @param CAN_FilterInitStruct: pointer to a CAN_FilterInitTypeDef
+ * structure that contains the configuration
+ * information.
+ * @retval None.
+ */
+void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct)
+{
+ uint32_t filter_number_bit_pos = 0;
+ /* Check the parameters */
+ assert_param(IS_CAN_FILTER_NUMBER(CAN_FilterInitStruct->CAN_FilterNumber));
+ assert_param(IS_CAN_FILTER_MODE(CAN_FilterInitStruct->CAN_FilterMode));
+ assert_param(IS_CAN_FILTER_SCALE(CAN_FilterInitStruct->CAN_FilterScale));
+ assert_param(IS_CAN_FILTER_FIFO(CAN_FilterInitStruct->CAN_FilterFIFOAssignment));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_FilterInitStruct->CAN_FilterActivation));
+
+ filter_number_bit_pos = ((uint32_t)1) << CAN_FilterInitStruct->CAN_FilterNumber;
+
+ /* Initialisation mode for the filter */
+ CAN1->FMR |= FMR_FINIT;
+
+ /* Filter Deactivation */
+ CAN1->FA1R &= ~(uint32_t)filter_number_bit_pos;
+
+ /* Filter Scale */
+ if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_16bit)
+ {
+ /* 16-bit scale for the filter */
+ CAN1->FS1R &= ~(uint32_t)filter_number_bit_pos;
+
+ /* First 16-bit identifier and First 16-bit mask */
+ /* Or First 16-bit identifier and Second 16-bit identifier */
+ CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 =
+ ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow) << 16) |
+ (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow);
+
+ /* Second 16-bit identifier and Second 16-bit mask */
+ /* Or Third 16-bit identifier and Fourth 16-bit identifier */
+ CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 =
+ ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) |
+ (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh);
+ }
+
+ if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_32bit)
+ {
+ /* 32-bit scale for the filter */
+ CAN1->FS1R |= filter_number_bit_pos;
+ /* 32-bit identifier or First 32-bit identifier */
+ CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 =
+ ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh) << 16) |
+ (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow);
+ /* 32-bit mask or Second 32-bit identifier */
+ CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 =
+ ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) |
+ (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow);
+ }
+
+ /* Filter Mode */
+ if (CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdMask)
+ {
+ /*Id/Mask mode for the filter*/
+ CAN1->FM1R &= ~(uint32_t)filter_number_bit_pos;
+ }
+ else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */
+ {
+ /*Identifier list mode for the filter*/
+ CAN1->FM1R |= (uint32_t)filter_number_bit_pos;
+ }
+
+ /* Filter FIFO assignment */
+ if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO0)
+ {
+ /* FIFO 0 assignation for the filter */
+ CAN1->FFA1R &= ~(uint32_t)filter_number_bit_pos;
+ }
+
+ if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO1)
+ {
+ /* FIFO 1 assignation for the filter */
+ CAN1->FFA1R |= (uint32_t)filter_number_bit_pos;
+ }
+
+ /* Filter activation */
+ if (CAN_FilterInitStruct->CAN_FilterActivation == ENABLE)
+ {
+ CAN1->FA1R |= filter_number_bit_pos;
+ }
+
+ /* Leave the initialisation mode for the filter */
+ CAN1->FMR &= ~FMR_FINIT;
+}
+
+/**
+ * @brief Fills each CAN_InitStruct member with its default value.
+ * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure which
+ * will be initialized.
+ * @retval None.
+ */
+void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct)
+{
+ /* Reset CAN init structure parameters values */
+
+ /* Initialize the time triggered communication mode */
+ CAN_InitStruct->CAN_TTCM = DISABLE;
+
+ /* Initialize the automatic bus-off management */
+ CAN_InitStruct->CAN_ABOM = DISABLE;
+
+ /* Initialize the automatic wake-up mode */
+ CAN_InitStruct->CAN_AWUM = DISABLE;
+
+ /* Initialize the no automatic retransmission */
+ CAN_InitStruct->CAN_NART = DISABLE;
+
+ /* Initialize the receive FIFO locked mode */
+ CAN_InitStruct->CAN_RFLM = DISABLE;
+
+ /* Initialize the transmit FIFO priority */
+ CAN_InitStruct->CAN_TXFP = DISABLE;
+
+ /* Initialize the CAN_Mode member */
+ CAN_InitStruct->CAN_Mode = CAN_Mode_Normal;
+
+ /* Initialize the CAN_SJW member */
+ CAN_InitStruct->CAN_SJW = CAN_SJW_1tq;
+
+ /* Initialize the CAN_BS1 member */
+ CAN_InitStruct->CAN_BS1 = CAN_BS1_4tq;
+
+ /* Initialize the CAN_BS2 member */
+ CAN_InitStruct->CAN_BS2 = CAN_BS2_3tq;
+
+ /* Initialize the CAN_Prescaler member */
+ CAN_InitStruct->CAN_Prescaler = 1;
+}
+
+/**
+ * @brief Select the start bank filter for slave CAN.
+ * @note This function applies only to STM32 Connectivity line devices.
+ * @param CAN_BankNumber: Select the start slave bank filter from 1..27.
+ * @retval None.
+ */
+void CAN_SlaveStartBank(uint8_t CAN_BankNumber)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_BANKNUMBER(CAN_BankNumber));
+
+ /* Enter Initialisation mode for the filter */
+ CAN1->FMR |= FMR_FINIT;
+
+ /* Select the start slave bank */
+ CAN1->FMR &= (uint32_t)0xFFFFC0F1 ;
+ CAN1->FMR |= (uint32_t)(CAN_BankNumber)<<8;
+
+ /* Leave Initialisation mode for the filter */
+ CAN1->FMR &= ~FMR_FINIT;
+}
+
+/**
+ * @brief Enables or disables the DBG Freeze for CAN.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param NewState: new state of the CAN peripheral. This parameter can
+ * be: ENABLE or DISABLE.
+ * @retval None.
+ */
+void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable Debug Freeze */
+ CANx->MCR |= MCR_DBF;
+ }
+ else
+ {
+ /* Disable Debug Freeze */
+ CANx->MCR &= ~MCR_DBF;
+ }
+}
+
+
+/**
+ * @brief Enables or disabes the CAN Time TriggerOperation communication mode.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param NewState : Mode new state , can be one of @ref FunctionalState.
+ * @note when enabled, Time stamp (TIME[15:0]) value is sent in the last
+ * two data bytes of the 8-byte message: TIME[7:0] in data byte 6
+ * and TIME[15:8] in data byte 7
+ * @note DLC must be programmed as 8 in order Time Stamp (2 bytes) to be
+ * sent over the CAN bus.
+ * @retval None
+ */
+void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the TTCM mode */
+ CANx->MCR |= CAN_MCR_TTCM;
+
+ /* Set TGT bits */
+ CANx->sTxMailBox[0].TDTR |= ((uint32_t)CAN_TDT0R_TGT);
+ CANx->sTxMailBox[1].TDTR |= ((uint32_t)CAN_TDT1R_TGT);
+ CANx->sTxMailBox[2].TDTR |= ((uint32_t)CAN_TDT2R_TGT);
+ }
+ else
+ {
+ /* Disable the TTCM mode */
+ CANx->MCR &= (uint32_t)(~(uint32_t)CAN_MCR_TTCM);
+
+ /* Reset TGT bits */
+ CANx->sTxMailBox[0].TDTR &= ((uint32_t)~CAN_TDT0R_TGT);
+ CANx->sTxMailBox[1].TDTR &= ((uint32_t)~CAN_TDT1R_TGT);
+ CANx->sTxMailBox[2].TDTR &= ((uint32_t)~CAN_TDT2R_TGT);
+ }
+}
+/**
+ * @brief Initiates the transmission of a message.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param TxMessage: pointer to a structure which contains CAN Id, CAN
+ * DLC and CAN data.
+ * @retval The number of the mailbox that is used for transmission
+ * or CAN_TxStatus_NoMailBox if there is no empty mailbox.
+ */
+uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage)
+{
+ uint8_t transmit_mailbox = 0;
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_IDTYPE(TxMessage->IDE));
+ assert_param(IS_CAN_RTR(TxMessage->RTR));
+ assert_param(IS_CAN_DLC(TxMessage->DLC));
+
+ /* Select one empty transmit mailbox */
+ if ((CANx->TSR&CAN_TSR_TME0) == CAN_TSR_TME0)
+ {
+ transmit_mailbox = 0;
+ }
+ else if ((CANx->TSR&CAN_TSR_TME1) == CAN_TSR_TME1)
+ {
+ transmit_mailbox = 1;
+ }
+ else if ((CANx->TSR&CAN_TSR_TME2) == CAN_TSR_TME2)
+ {
+ transmit_mailbox = 2;
+ }
+ else
+ {
+ transmit_mailbox = CAN_TxStatus_NoMailBox;
+ }
+
+ if (transmit_mailbox != CAN_TxStatus_NoMailBox)
+ {
+ /* Set up the Id */
+ CANx->sTxMailBox[transmit_mailbox].TIR &= TMIDxR_TXRQ;
+ if (TxMessage->IDE == CAN_Id_Standard)
+ {
+ assert_param(IS_CAN_STDID(TxMessage->StdId));
+ CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->StdId << 21) | \
+ TxMessage->RTR);
+ }
+ else
+ {
+ assert_param(IS_CAN_EXTID(TxMessage->ExtId));
+ CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->ExtId << 3) | \
+ TxMessage->IDE | \
+ TxMessage->RTR);
+ }
+
+ /* Set up the DLC */
+ TxMessage->DLC &= (uint8_t)0x0000000F;
+ CANx->sTxMailBox[transmit_mailbox].TDTR &= (uint32_t)0xFFFFFFF0;
+ CANx->sTxMailBox[transmit_mailbox].TDTR |= TxMessage->DLC;
+
+ /* Set up the data field */
+ CANx->sTxMailBox[transmit_mailbox].TDLR = (((uint32_t)TxMessage->Data[3] << 24) |
+ ((uint32_t)TxMessage->Data[2] << 16) |
+ ((uint32_t)TxMessage->Data[1] << 8) |
+ ((uint32_t)TxMessage->Data[0]));
+ CANx->sTxMailBox[transmit_mailbox].TDHR = (((uint32_t)TxMessage->Data[7] << 24) |
+ ((uint32_t)TxMessage->Data[6] << 16) |
+ ((uint32_t)TxMessage->Data[5] << 8) |
+ ((uint32_t)TxMessage->Data[4]));
+ /* Request transmission */
+ CANx->sTxMailBox[transmit_mailbox].TIR |= TMIDxR_TXRQ;
+ }
+ return transmit_mailbox;
+}
+
+/**
+ * @brief Checks the transmission of a message.
+ * @param CANx: where x can be 1 or 2 to to select the
+ * CAN peripheral.
+ * @param TransmitMailbox: the number of the mailbox that is used for
+ * transmission.
+ * @retval CAN_TxStatus_Ok if the CAN driver transmits the message, CAN_TxStatus_Failed
+ * in an other case.
+ */
+uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox)
+{
+ uint32_t state = 0;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_TRANSMITMAILBOX(TransmitMailbox));
+
+ switch (TransmitMailbox)
+ {
+ case (CAN_TXMAILBOX_0):
+ state = CANx->TSR & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0);
+ break;
+ case (CAN_TXMAILBOX_1):
+ state = CANx->TSR & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1);
+ break;
+ case (CAN_TXMAILBOX_2):
+ state = CANx->TSR & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2);
+ break;
+ default:
+ state = CAN_TxStatus_Failed;
+ break;
+ }
+ switch (state)
+ {
+ /* transmit pending */
+ case (0x0): state = CAN_TxStatus_Pending;
+ break;
+ /* transmit failed */
+ case (CAN_TSR_RQCP0 | CAN_TSR_TME0): state = CAN_TxStatus_Failed;
+ break;
+ case (CAN_TSR_RQCP1 | CAN_TSR_TME1): state = CAN_TxStatus_Failed;
+ break;
+ case (CAN_TSR_RQCP2 | CAN_TSR_TME2): state = CAN_TxStatus_Failed;
+ break;
+ /* transmit succeeded */
+ case (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0):state = CAN_TxStatus_Ok;
+ break;
+ case (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1):state = CAN_TxStatus_Ok;
+ break;
+ case (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2):state = CAN_TxStatus_Ok;
+ break;
+ default: state = CAN_TxStatus_Failed;
+ break;
+ }
+ return (uint8_t) state;
+}
+
+/**
+ * @brief Cancels a transmit request.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param Mailbox: Mailbox number.
+ * @retval None.
+ */
+void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_TRANSMITMAILBOX(Mailbox));
+ /* abort transmission */
+ switch (Mailbox)
+ {
+ case (CAN_TXMAILBOX_0): CANx->TSR |= CAN_TSR_ABRQ0;
+ break;
+ case (CAN_TXMAILBOX_1): CANx->TSR |= CAN_TSR_ABRQ1;
+ break;
+ case (CAN_TXMAILBOX_2): CANx->TSR |= CAN_TSR_ABRQ2;
+ break;
+ default:
+ break;
+ }
+}
+
+
+/**
+ * @brief Receives a message.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @param RxMessage: pointer to a structure receive message which contains
+ * CAN Id, CAN DLC, CAN datas and FMI number.
+ * @retval None.
+ */
+void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_FIFO(FIFONumber));
+ /* Get the Id */
+ RxMessage->IDE = (uint8_t)0x04 & CANx->sFIFOMailBox[FIFONumber].RIR;
+ if (RxMessage->IDE == CAN_Id_Standard)
+ {
+ RxMessage->StdId = (uint32_t)0x000007FF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 21);
+ }
+ else
+ {
+ RxMessage->ExtId = (uint32_t)0x1FFFFFFF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 3);
+ }
+
+ RxMessage->RTR = (uint8_t)0x02 & CANx->sFIFOMailBox[FIFONumber].RIR;
+ /* Get the DLC */
+ RxMessage->DLC = (uint8_t)0x0F & CANx->sFIFOMailBox[FIFONumber].RDTR;
+ /* Get the FMI */
+ RxMessage->FMI = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDTR >> 8);
+ /* Get the data field */
+ RxMessage->Data[0] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDLR;
+ RxMessage->Data[1] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 8);
+ RxMessage->Data[2] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 16);
+ RxMessage->Data[3] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 24);
+ RxMessage->Data[4] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDHR;
+ RxMessage->Data[5] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 8);
+ RxMessage->Data[6] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 16);
+ RxMessage->Data[7] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 24);
+ /* Release the FIFO */
+ /* Release FIFO0 */
+ if (FIFONumber == CAN_FIFO0)
+ {
+ CANx->RF0R |= CAN_RF0R_RFOM0;
+ }
+ /* Release FIFO1 */
+ else /* FIFONumber == CAN_FIFO1 */
+ {
+ CANx->RF1R |= CAN_RF1R_RFOM1;
+ }
+}
+
+/**
+ * @brief Releases the specified FIFO.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param FIFONumber: FIFO to release, CAN_FIFO0 or CAN_FIFO1.
+ * @retval None.
+ */
+void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_FIFO(FIFONumber));
+ /* Release FIFO0 */
+ if (FIFONumber == CAN_FIFO0)
+ {
+ CANx->RF0R |= CAN_RF0R_RFOM0;
+ }
+ /* Release FIFO1 */
+ else /* FIFONumber == CAN_FIFO1 */
+ {
+ CANx->RF1R |= CAN_RF1R_RFOM1;
+ }
+}
+
+/**
+ * @brief Returns the number of pending messages.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval NbMessage : which is the number of pending message.
+ */
+uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber)
+{
+ uint8_t message_pending=0;
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_FIFO(FIFONumber));
+ if (FIFONumber == CAN_FIFO0)
+ {
+ message_pending = (uint8_t)(CANx->RF0R&(uint32_t)0x03);
+ }
+ else if (FIFONumber == CAN_FIFO1)
+ {
+ message_pending = (uint8_t)(CANx->RF1R&(uint32_t)0x03);
+ }
+ else
+ {
+ message_pending = 0;
+ }
+ return message_pending;
+}
+
+
+/**
+ * @brief Select the CAN Operation mode.
+ * @param CAN_OperatingMode : CAN Operating Mode. This parameter can be one
+ * of @ref CAN_OperatingMode_TypeDef enumeration.
+ * @retval status of the requested mode which can be
+ * - CAN_ModeStatus_Failed CAN failed entering the specific mode
+ * - CAN_ModeStatus_Success CAN Succeed entering the specific mode
+
+ */
+uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode)
+{
+ uint8_t status = CAN_ModeStatus_Failed;
+
+ /* Timeout for INAK or also for SLAK bits*/
+ uint32_t timeout = INAK_TIMEOUT;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_OPERATING_MODE(CAN_OperatingMode));
+
+ if (CAN_OperatingMode == CAN_OperatingMode_Initialization)
+ {
+ /* Request initialisation */
+ CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_SLEEP)) | CAN_MCR_INRQ);
+
+ /* Wait the acknowledge */
+ while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK) && (timeout != 0))
+ {
+ timeout--;
+ }
+ if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK)
+ {
+ status = CAN_ModeStatus_Failed;
+ }
+ else
+ {
+ status = CAN_ModeStatus_Success;
+ }
+ }
+ else if (CAN_OperatingMode == CAN_OperatingMode_Normal)
+ {
+ /* Request leave initialisation and sleep mode and enter Normal mode */
+ CANx->MCR &= (uint32_t)(~(CAN_MCR_SLEEP|CAN_MCR_INRQ));
+
+ /* Wait the acknowledge */
+ while (((CANx->MSR & CAN_MODE_MASK) != 0) && (timeout!=0))
+ {
+ timeout--;
+ }
+ if ((CANx->MSR & CAN_MODE_MASK) != 0)
+ {
+ status = CAN_ModeStatus_Failed;
+ }
+ else
+ {
+ status = CAN_ModeStatus_Success;
+ }
+ }
+ else if (CAN_OperatingMode == CAN_OperatingMode_Sleep)
+ {
+ /* Request Sleep mode */
+ CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP);
+
+ /* Wait the acknowledge */
+ while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK) && (timeout!=0))
+ {
+ timeout--;
+ }
+ if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK)
+ {
+ status = CAN_ModeStatus_Failed;
+ }
+ else
+ {
+ status = CAN_ModeStatus_Success;
+ }
+ }
+ else
+ {
+ status = CAN_ModeStatus_Failed;
+ }
+
+ return (uint8_t) status;
+}
+
+/**
+ * @brief Enters the low power mode.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @retval status: CAN_Sleep_Ok if sleep entered, CAN_Sleep_Failed in an
+ * other case.
+ */
+uint8_t CAN_Sleep(CAN_TypeDef* CANx)
+{
+ uint8_t sleepstatus = CAN_Sleep_Failed;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+
+ /* Request Sleep mode */
+ CANx->MCR = (((CANx->MCR) & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP);
+
+ /* Sleep mode status */
+ if ((CANx->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) == CAN_MSR_SLAK)
+ {
+ /* Sleep mode not entered */
+ sleepstatus = CAN_Sleep_Ok;
+ }
+ /* return sleep mode status */
+ return (uint8_t)sleepstatus;
+}
+
+/**
+ * @brief Wakes the CAN up.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @retval status: CAN_WakeUp_Ok if sleep mode left, CAN_WakeUp_Failed in an
+ * other case.
+ */
+uint8_t CAN_WakeUp(CAN_TypeDef* CANx)
+{
+ uint32_t wait_slak = SLAK_TIMEOUT;
+ uint8_t wakeupstatus = CAN_WakeUp_Failed;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+
+ /* Wake up request */
+ CANx->MCR &= ~(uint32_t)CAN_MCR_SLEEP;
+
+ /* Sleep mode status */
+ while(((CANx->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)&&(wait_slak!=0x00))
+ {
+ wait_slak--;
+ }
+ if((CANx->MSR & CAN_MSR_SLAK) != CAN_MSR_SLAK)
+ {
+ /* wake up done : Sleep mode exited */
+ wakeupstatus = CAN_WakeUp_Ok;
+ }
+ /* return wakeup status */
+ return (uint8_t)wakeupstatus;
+}
+
+
+/**
+ * @brief Returns the CANx's last error code (LEC).
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @retval CAN_ErrorCode: specifies the Error code :
+ * - CAN_ERRORCODE_NoErr No Error
+ * - CAN_ERRORCODE_StuffErr Stuff Error
+ * - CAN_ERRORCODE_FormErr Form Error
+ * - CAN_ERRORCODE_ACKErr Acknowledgment Error
+ * - CAN_ERRORCODE_BitRecessiveErr Bit Recessive Error
+ * - CAN_ERRORCODE_BitDominantErr Bit Dominant Error
+ * - CAN_ERRORCODE_CRCErr CRC Error
+ * - CAN_ERRORCODE_SoftwareSetErr Software Set Error
+ */
+
+uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx)
+{
+ uint8_t errorcode=0;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+
+ /* Get the error code*/
+ errorcode = (((uint8_t)CANx->ESR) & (uint8_t)CAN_ESR_LEC);
+
+ /* Return the error code*/
+ return errorcode;
+}
+/**
+ * @brief Returns the CANx Receive Error Counter (REC).
+ * @note In case of an error during reception, this counter is incremented
+ * by 1 or by 8 depending on the error condition as defined by the CAN
+ * standard. After every successful reception, the counter is
+ * decremented by 1 or reset to 120 if its value was higher than 128.
+ * When the counter value exceeds 127, the CAN controller enters the
+ * error passive state.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @retval CAN Receive Error Counter.
+ */
+uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx)
+{
+ uint8_t counter=0;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+
+ /* Get the Receive Error Counter*/
+ counter = (uint8_t)((CANx->ESR & CAN_ESR_REC)>> 24);
+
+ /* Return the Receive Error Counter*/
+ return counter;
+}
+
+
+/**
+ * @brief Returns the LSB of the 9-bit CANx Transmit Error Counter(TEC).
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @retval LSB of the 9-bit CAN Transmit Error Counter.
+ */
+uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx)
+{
+ uint8_t counter=0;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+
+ /* Get the LSB of the 9-bit CANx Transmit Error Counter(TEC) */
+ counter = (uint8_t)((CANx->ESR & CAN_ESR_TEC)>> 16);
+
+ /* Return the LSB of the 9-bit CANx Transmit Error Counter(TEC) */
+ return counter;
+}
+
+
+/**
+ * @brief Enables or disables the specified CANx interrupts.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param CAN_IT: specifies the CAN interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * - CAN_IT_TME,
+ * - CAN_IT_FMP0,
+ * - CAN_IT_FF0,
+ * - CAN_IT_FOV0,
+ * - CAN_IT_FMP1,
+ * - CAN_IT_FF1,
+ * - CAN_IT_FOV1,
+ * - CAN_IT_EWG,
+ * - CAN_IT_EPV,
+ * - CAN_IT_LEC,
+ * - CAN_IT_ERR,
+ * - CAN_IT_WKU or
+ * - CAN_IT_SLK.
+ * @param NewState: new state of the CAN interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None.
+ */
+void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_IT(CAN_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected CANx interrupt */
+ CANx->IER |= CAN_IT;
+ }
+ else
+ {
+ /* Disable the selected CANx interrupt */
+ CANx->IER &= ~CAN_IT;
+ }
+}
+/**
+ * @brief Checks whether the specified CAN flag is set or not.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param CAN_FLAG: specifies the flag to check.
+ * This parameter can be one of the following flags:
+ * - CAN_FLAG_EWG
+ * - CAN_FLAG_EPV
+ * - CAN_FLAG_BOF
+ * - CAN_FLAG_RQCP0
+ * - CAN_FLAG_RQCP1
+ * - CAN_FLAG_RQCP2
+ * - CAN_FLAG_FMP1
+ * - CAN_FLAG_FF1
+ * - CAN_FLAG_FOV1
+ * - CAN_FLAG_FMP0
+ * - CAN_FLAG_FF0
+ * - CAN_FLAG_FOV0
+ * - CAN_FLAG_WKU
+ * - CAN_FLAG_SLAK
+ * - CAN_FLAG_LEC
+ * @retval The new state of CAN_FLAG (SET or RESET).
+ */
+FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_GET_FLAG(CAN_FLAG));
+
+
+ if((CAN_FLAG & CAN_FLAGS_ESR) != (uint32_t)RESET)
+ {
+ /* Check the status of the specified CAN flag */
+ if ((CANx->ESR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+ {
+ /* CAN_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CAN_FLAG is reset */
+ bitstatus = RESET;
+ }
+ }
+ else if((CAN_FLAG & CAN_FLAGS_MSR) != (uint32_t)RESET)
+ {
+ /* Check the status of the specified CAN flag */
+ if ((CANx->MSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+ {
+ /* CAN_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CAN_FLAG is reset */
+ bitstatus = RESET;
+ }
+ }
+ else if((CAN_FLAG & CAN_FLAGS_TSR) != (uint32_t)RESET)
+ {
+ /* Check the status of the specified CAN flag */
+ if ((CANx->TSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+ {
+ /* CAN_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CAN_FLAG is reset */
+ bitstatus = RESET;
+ }
+ }
+ else if((CAN_FLAG & CAN_FLAGS_RF0R) != (uint32_t)RESET)
+ {
+ /* Check the status of the specified CAN flag */
+ if ((CANx->RF0R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+ {
+ /* CAN_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CAN_FLAG is reset */
+ bitstatus = RESET;
+ }
+ }
+ else /* If(CAN_FLAG & CAN_FLAGS_RF1R != (uint32_t)RESET) */
+ {
+ /* Check the status of the specified CAN flag */
+ if ((uint32_t)(CANx->RF1R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+ {
+ /* CAN_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CAN_FLAG is reset */
+ bitstatus = RESET;
+ }
+ }
+ /* Return the CAN_FLAG status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the CAN's pending flags.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param CAN_FLAG: specifies the flag to clear.
+ * This parameter can be one of the following flags:
+ * - CAN_FLAG_RQCP0
+ * - CAN_FLAG_RQCP1
+ * - CAN_FLAG_RQCP2
+ * - CAN_FLAG_FF1
+ * - CAN_FLAG_FOV1
+ * - CAN_FLAG_FF0
+ * - CAN_FLAG_FOV0
+ * - CAN_FLAG_WKU
+ * - CAN_FLAG_SLAK
+ * - CAN_FLAG_LEC
+ * @retval None.
+ */
+void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG)
+{
+ uint32_t flagtmp=0;
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_CLEAR_FLAG(CAN_FLAG));
+
+ if (CAN_FLAG == CAN_FLAG_LEC) /* ESR register */
+ {
+ /* Clear the selected CAN flags */
+ CANx->ESR = (uint32_t)RESET;
+ }
+ else /* MSR or TSR or RF0R or RF1R */
+ {
+ flagtmp = CAN_FLAG & 0x000FFFFF;
+
+ if ((CAN_FLAG & CAN_FLAGS_RF0R)!=(uint32_t)RESET)
+ {
+ /* Receive Flags */
+ CANx->RF0R = (uint32_t)(flagtmp);
+ }
+ else if ((CAN_FLAG & CAN_FLAGS_RF1R)!=(uint32_t)RESET)
+ {
+ /* Receive Flags */
+ CANx->RF1R = (uint32_t)(flagtmp);
+ }
+ else if ((CAN_FLAG & CAN_FLAGS_TSR)!=(uint32_t)RESET)
+ {
+ /* Transmit Flags */
+ CANx->TSR = (uint32_t)(flagtmp);
+ }
+ else /* If((CAN_FLAG & CAN_FLAGS_MSR)!=(uint32_t)RESET) */
+ {
+ /* Operating mode Flags */
+ CANx->MSR = (uint32_t)(flagtmp);
+ }
+ }
+}
+
+/**
+ * @brief Checks whether the specified CANx interrupt has occurred or not.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param CAN_IT: specifies the CAN interrupt source to check.
+ * This parameter can be one of the following flags:
+ * - CAN_IT_TME
+ * - CAN_IT_FMP0
+ * - CAN_IT_FF0
+ * - CAN_IT_FOV0
+ * - CAN_IT_FMP1
+ * - CAN_IT_FF1
+ * - CAN_IT_FOV1
+ * - CAN_IT_WKU
+ * - CAN_IT_SLK
+ * - CAN_IT_EWG
+ * - CAN_IT_EPV
+ * - CAN_IT_BOF
+ * - CAN_IT_LEC
+ * - CAN_IT_ERR
+ * @retval The current state of CAN_IT (SET or RESET).
+ */
+ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT)
+{
+ ITStatus itstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_IT(CAN_IT));
+
+ /* check the enable interrupt bit */
+ if((CANx->IER & CAN_IT) != RESET)
+ {
+ /* in case the Interrupt is enabled, .... */
+ switch (CAN_IT)
+ {
+ case CAN_IT_TME:
+ /* Check CAN_TSR_RQCPx bits */
+ itstatus = CheckITStatus(CANx->TSR, CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2);
+ break;
+ case CAN_IT_FMP0:
+ /* Check CAN_RF0R_FMP0 bit */
+ itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FMP0);
+ break;
+ case CAN_IT_FF0:
+ /* Check CAN_RF0R_FULL0 bit */
+ itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FULL0);
+ break;
+ case CAN_IT_FOV0:
+ /* Check CAN_RF0R_FOVR0 bit */
+ itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FOVR0);
+ break;
+ case CAN_IT_FMP1:
+ /* Check CAN_RF1R_FMP1 bit */
+ itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FMP1);
+ break;
+ case CAN_IT_FF1:
+ /* Check CAN_RF1R_FULL1 bit */
+ itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FULL1);
+ break;
+ case CAN_IT_FOV1:
+ /* Check CAN_RF1R_FOVR1 bit */
+ itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FOVR1);
+ break;
+ case CAN_IT_WKU:
+ /* Check CAN_MSR_WKUI bit */
+ itstatus = CheckITStatus(CANx->MSR, CAN_MSR_WKUI);
+ break;
+ case CAN_IT_SLK:
+ /* Check CAN_MSR_SLAKI bit */
+ itstatus = CheckITStatus(CANx->MSR, CAN_MSR_SLAKI);
+ break;
+ case CAN_IT_EWG:
+ /* Check CAN_ESR_EWGF bit */
+ itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EWGF);
+ break;
+ case CAN_IT_EPV:
+ /* Check CAN_ESR_EPVF bit */
+ itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EPVF);
+ break;
+ case CAN_IT_BOF:
+ /* Check CAN_ESR_BOFF bit */
+ itstatus = CheckITStatus(CANx->ESR, CAN_ESR_BOFF);
+ break;
+ case CAN_IT_LEC:
+ /* Check CAN_ESR_LEC bit */
+ itstatus = CheckITStatus(CANx->ESR, CAN_ESR_LEC);
+ break;
+ case CAN_IT_ERR:
+ /* Check CAN_MSR_ERRI bit */
+ itstatus = CheckITStatus(CANx->MSR, CAN_MSR_ERRI);
+ break;
+ default :
+ /* in case of error, return RESET */
+ itstatus = RESET;
+ break;
+ }
+ }
+ else
+ {
+ /* in case the Interrupt is not enabled, return RESET */
+ itstatus = RESET;
+ }
+
+ /* Return the CAN_IT status */
+ return itstatus;
+}
+
+/**
+ * @brief Clears the CANx's interrupt pending bits.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param CAN_IT: specifies the interrupt pending bit to clear.
+ * - CAN_IT_TME
+ * - CAN_IT_FF0
+ * - CAN_IT_FOV0
+ * - CAN_IT_FF1
+ * - CAN_IT_FOV1
+ * - CAN_IT_WKU
+ * - CAN_IT_SLK
+ * - CAN_IT_EWG
+ * - CAN_IT_EPV
+ * - CAN_IT_BOF
+ * - CAN_IT_LEC
+ * - CAN_IT_ERR
+ * @retval None.
+ */
+void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_CLEAR_IT(CAN_IT));
+
+ switch (CAN_IT)
+ {
+ case CAN_IT_TME:
+ /* Clear CAN_TSR_RQCPx (rc_w1)*/
+ CANx->TSR = CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2;
+ break;
+ case CAN_IT_FF0:
+ /* Clear CAN_RF0R_FULL0 (rc_w1)*/
+ CANx->RF0R = CAN_RF0R_FULL0;
+ break;
+ case CAN_IT_FOV0:
+ /* Clear CAN_RF0R_FOVR0 (rc_w1)*/
+ CANx->RF0R = CAN_RF0R_FOVR0;
+ break;
+ case CAN_IT_FF1:
+ /* Clear CAN_RF1R_FULL1 (rc_w1)*/
+ CANx->RF1R = CAN_RF1R_FULL1;
+ break;
+ case CAN_IT_FOV1:
+ /* Clear CAN_RF1R_FOVR1 (rc_w1)*/
+ CANx->RF1R = CAN_RF1R_FOVR1;
+ break;
+ case CAN_IT_WKU:
+ /* Clear CAN_MSR_WKUI (rc_w1)*/
+ CANx->MSR = CAN_MSR_WKUI;
+ break;
+ case CAN_IT_SLK:
+ /* Clear CAN_MSR_SLAKI (rc_w1)*/
+ CANx->MSR = CAN_MSR_SLAKI;
+ break;
+ case CAN_IT_EWG:
+ /* Clear CAN_MSR_ERRI (rc_w1) */
+ CANx->MSR = CAN_MSR_ERRI;
+ /* Note : the corresponding Flag is cleared by hardware depending
+ of the CAN Bus status*/
+ break;
+ case CAN_IT_EPV:
+ /* Clear CAN_MSR_ERRI (rc_w1) */
+ CANx->MSR = CAN_MSR_ERRI;
+ /* Note : the corresponding Flag is cleared by hardware depending
+ of the CAN Bus status*/
+ break;
+ case CAN_IT_BOF:
+ /* Clear CAN_MSR_ERRI (rc_w1) */
+ CANx->MSR = CAN_MSR_ERRI;
+ /* Note : the corresponding Flag is cleared by hardware depending
+ of the CAN Bus status*/
+ break;
+ case CAN_IT_LEC:
+ /* Clear LEC bits */
+ CANx->ESR = RESET;
+ /* Clear CAN_MSR_ERRI (rc_w1) */
+ CANx->MSR = CAN_MSR_ERRI;
+ break;
+ case CAN_IT_ERR:
+ /*Clear LEC bits */
+ CANx->ESR = RESET;
+ /* Clear CAN_MSR_ERRI (rc_w1) */
+ CANx->MSR = CAN_MSR_ERRI;
+ /* Note : BOFF, EPVF and EWGF Flags are cleared by hardware depending
+ of the CAN Bus status*/
+ break;
+ default :
+ break;
+ }
+}
+
+/**
+ * @brief Checks whether the CAN interrupt has occurred or not.
+ * @param CAN_Reg: specifies the CAN interrupt register to check.
+ * @param It_Bit: specifies the interrupt source bit to check.
+ * @retval The new state of the CAN Interrupt (SET or RESET).
+ */
+static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit)
+{
+ ITStatus pendingbitstatus = RESET;
+
+ if ((CAN_Reg & It_Bit) != (uint32_t)RESET)
+ {
+ /* CAN_IT is set */
+ pendingbitstatus = SET;
+ }
+ else
+ {
+ /* CAN_IT is reset */
+ pendingbitstatus = RESET;
+ }
+ return pendingbitstatus;
+}
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_cec.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_cec.c
new file mode 100644
index 00000000..08b501a0
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_cec.c
@@ -0,0 +1,433 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_cec.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the CEC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_cec.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup CEC
+ * @brief CEC driver modules
+ * @{
+ */
+
+/** @defgroup CEC_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_Private_Defines
+ * @{
+ */
+
+/* ------------ CEC registers bit address in the alias region ----------- */
+#define CEC_OFFSET (CEC_BASE - PERIPH_BASE)
+
+/* --- CFGR Register ---*/
+
+/* Alias word address of PE bit */
+#define CFGR_OFFSET (CEC_OFFSET + 0x00)
+#define PE_BitNumber 0x00
+#define CFGR_PE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (PE_BitNumber * 4))
+
+/* Alias word address of IE bit */
+#define IE_BitNumber 0x01
+#define CFGR_IE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (IE_BitNumber * 4))
+
+/* --- CSR Register ---*/
+
+/* Alias word address of TSOM bit */
+#define CSR_OFFSET (CEC_OFFSET + 0x10)
+#define TSOM_BitNumber 0x00
+#define CSR_TSOM_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TSOM_BitNumber * 4))
+
+/* Alias word address of TEOM bit */
+#define TEOM_BitNumber 0x01
+#define CSR_TEOM_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEOM_BitNumber * 4))
+
+#define CFGR_CLEAR_Mask (uint8_t)(0xF3) /* CFGR register Mask */
+#define FLAG_Mask ((uint32_t)0x00FFFFFF) /* CEC FLAG mask */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the CEC peripheral registers to their default reset
+ * values.
+ * @param None
+ * @retval None
+ */
+void CEC_DeInit(void)
+{
+ /* Enable CEC reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_CEC, ENABLE);
+ /* Release CEC from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_CEC, DISABLE);
+}
+
+
+/**
+ * @brief Initializes the CEC peripheral according to the specified
+ * parameters in the CEC_InitStruct.
+ * @param CEC_InitStruct: pointer to an CEC_InitTypeDef structure that
+ * contains the configuration information for the specified
+ * CEC peripheral.
+ * @retval None
+ */
+void CEC_Init(CEC_InitTypeDef* CEC_InitStruct)
+{
+ uint16_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_CEC_BIT_TIMING_ERROR_MODE(CEC_InitStruct->CEC_BitTimingMode));
+ assert_param(IS_CEC_BIT_PERIOD_ERROR_MODE(CEC_InitStruct->CEC_BitPeriodMode));
+
+ /*---------------------------- CEC CFGR Configuration -----------------*/
+ /* Get the CEC CFGR value */
+ tmpreg = CEC->CFGR;
+
+ /* Clear BTEM and BPEM bits */
+ tmpreg &= CFGR_CLEAR_Mask;
+
+ /* Configure CEC: Bit Timing Error and Bit Period Error */
+ tmpreg |= (uint16_t)(CEC_InitStruct->CEC_BitTimingMode | CEC_InitStruct->CEC_BitPeriodMode);
+
+ /* Write to CEC CFGR register*/
+ CEC->CFGR = tmpreg;
+
+}
+
+/**
+ * @brief Enables or disables the specified CEC peripheral.
+ * @param NewState: new state of the CEC peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void CEC_Cmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CFGR_PE_BB = (uint32_t)NewState;
+
+ if(NewState == DISABLE)
+ {
+ /* Wait until the PE bit is cleared by hardware (Idle Line detected) */
+ while((CEC->CFGR & CEC_CFGR_PE) != (uint32_t)RESET)
+ {
+ }
+ }
+}
+
+/**
+ * @brief Enables or disables the CEC interrupt.
+ * @param NewState: new state of the CEC interrupt.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void CEC_ITConfig(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CFGR_IE_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Defines the Own Address of the CEC device.
+ * @param CEC_OwnAddress: The CEC own address
+ * @retval None
+ */
+void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress)
+{
+ /* Check the parameters */
+ assert_param(IS_CEC_ADDRESS(CEC_OwnAddress));
+
+ /* Set the CEC own address */
+ CEC->OAR = CEC_OwnAddress;
+}
+
+/**
+ * @brief Sets the CEC prescaler value.
+ * @param CEC_Prescaler: CEC prescaler new value
+ * @retval None
+ */
+void CEC_SetPrescaler(uint16_t CEC_Prescaler)
+{
+ /* Check the parameters */
+ assert_param(IS_CEC_PRESCALER(CEC_Prescaler));
+
+ /* Set the Prescaler value*/
+ CEC->PRES = CEC_Prescaler;
+}
+
+/**
+ * @brief Transmits single data through the CEC peripheral.
+ * @param Data: the data to transmit.
+ * @retval None
+ */
+void CEC_SendDataByte(uint8_t Data)
+{
+ /* Transmit Data */
+ CEC->TXD = Data ;
+}
+
+
+/**
+ * @brief Returns the most recent received data by the CEC peripheral.
+ * @param None
+ * @retval The received data.
+ */
+uint8_t CEC_ReceiveDataByte(void)
+{
+ /* Receive Data */
+ return (uint8_t)(CEC->RXD);
+}
+
+/**
+ * @brief Starts a new message.
+ * @param None
+ * @retval None
+ */
+void CEC_StartOfMessage(void)
+{
+ /* Starts of new message */
+ *(__IO uint32_t *) CSR_TSOM_BB = (uint32_t)0x1;
+}
+
+/**
+ * @brief Transmits message with or without an EOM bit.
+ * @param NewState: new state of the CEC Tx End Of Message.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void CEC_EndOfMessageCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ /* The data byte will be transmitted with or without an EOM bit*/
+ *(__IO uint32_t *) CSR_TEOM_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Gets the CEC flag status
+ * @param CEC_FLAG: specifies the CEC flag to check.
+ * This parameter can be one of the following values:
+ * @arg CEC_FLAG_BTE: Bit Timing Error
+ * @arg CEC_FLAG_BPE: Bit Period Error
+ * @arg CEC_FLAG_RBTFE: Rx Block Transfer Finished Error
+ * @arg CEC_FLAG_SBE: Start Bit Error
+ * @arg CEC_FLAG_ACKE: Block Acknowledge Error
+ * @arg CEC_FLAG_LINE: Line Error
+ * @arg CEC_FLAG_TBTFE: Tx Block Transfer Finished Error
+ * @arg CEC_FLAG_TEOM: Tx End Of Message
+ * @arg CEC_FLAG_TERR: Tx Error
+ * @arg CEC_FLAG_TBTRF: Tx Byte Transfer Request or Block Transfer Finished
+ * @arg CEC_FLAG_RSOM: Rx Start Of Message
+ * @arg CEC_FLAG_REOM: Rx End Of Message
+ * @arg CEC_FLAG_RERR: Rx Error
+ * @arg CEC_FLAG_RBTF: Rx Byte/Block Transfer Finished
+ * @retval The new state of CEC_FLAG (SET or RESET)
+ */
+FlagStatus CEC_GetFlagStatus(uint32_t CEC_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ uint32_t cecreg = 0, cecbase = 0;
+
+ /* Check the parameters */
+ assert_param(IS_CEC_GET_FLAG(CEC_FLAG));
+
+ /* Get the CEC peripheral base address */
+ cecbase = (uint32_t)(CEC_BASE);
+
+ /* Read flag register index */
+ cecreg = CEC_FLAG >> 28;
+
+ /* Get bit[23:0] of the flag */
+ CEC_FLAG &= FLAG_Mask;
+
+ if(cecreg != 0)
+ {
+ /* Flag in CEC ESR Register */
+ CEC_FLAG = (uint32_t)(CEC_FLAG >> 16);
+
+ /* Get the CEC ESR register address */
+ cecbase += 0xC;
+ }
+ else
+ {
+ /* Get the CEC CSR register address */
+ cecbase += 0x10;
+ }
+
+ if(((*(__IO uint32_t *)cecbase) & CEC_FLAG) != (uint32_t)RESET)
+ {
+ /* CEC_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CEC_FLAG is reset */
+ bitstatus = RESET;
+ }
+
+ /* Return the CEC_FLAG status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the CEC's pending flags.
+ * @param CEC_FLAG: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg CEC_FLAG_TERR: Tx Error
+ * @arg CEC_FLAG_TBTRF: Tx Byte Transfer Request or Block Transfer Finished
+ * @arg CEC_FLAG_RSOM: Rx Start Of Message
+ * @arg CEC_FLAG_REOM: Rx End Of Message
+ * @arg CEC_FLAG_RERR: Rx Error
+ * @arg CEC_FLAG_RBTF: Rx Byte/Block Transfer Finished
+ * @retval None
+ */
+void CEC_ClearFlag(uint32_t CEC_FLAG)
+{
+ uint32_t tmp = 0x0;
+
+ /* Check the parameters */
+ assert_param(IS_CEC_CLEAR_FLAG(CEC_FLAG));
+
+ tmp = CEC->CSR & 0x2;
+
+ /* Clear the selected CEC flags */
+ CEC->CSR &= (uint32_t)(((~(uint32_t)CEC_FLAG) & 0xFFFFFFFC) | tmp);
+}
+
+/**
+ * @brief Checks whether the specified CEC interrupt has occurred or not.
+ * @param CEC_IT: specifies the CEC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg CEC_IT_TERR: Tx Error
+ * @arg CEC_IT_TBTF: Tx Block Transfer Finished
+ * @arg CEC_IT_RERR: Rx Error
+ * @arg CEC_IT_RBTF: Rx Block Transfer Finished
+ * @retval The new state of CEC_IT (SET or RESET).
+ */
+ITStatus CEC_GetITStatus(uint8_t CEC_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t enablestatus = 0;
+
+ /* Check the parameters */
+ assert_param(IS_CEC_GET_IT(CEC_IT));
+
+ /* Get the CEC IT enable bit status */
+ enablestatus = (CEC->CFGR & (uint8_t)CEC_CFGR_IE) ;
+
+ /* Check the status of the specified CEC interrupt */
+ if (((CEC->CSR & CEC_IT) != (uint32_t)RESET) && enablestatus)
+ {
+ /* CEC_IT is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CEC_IT is reset */
+ bitstatus = RESET;
+ }
+ /* Return the CEC_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the CEC's interrupt pending bits.
+ * @param CEC_IT: specifies the CEC interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg CEC_IT_TERR: Tx Error
+ * @arg CEC_IT_TBTF: Tx Block Transfer Finished
+ * @arg CEC_IT_RERR: Rx Error
+ * @arg CEC_IT_RBTF: Rx Block Transfer Finished
+ * @retval None
+ */
+void CEC_ClearITPendingBit(uint16_t CEC_IT)
+{
+ uint32_t tmp = 0x0;
+
+ /* Check the parameters */
+ assert_param(IS_CEC_GET_IT(CEC_IT));
+
+ tmp = CEC->CSR & 0x2;
+
+ /* Clear the selected CEC interrupt pending bits */
+ CEC->CSR &= (uint32_t)(((~(uint32_t)CEC_IT) & 0xFFFFFFFC) | tmp);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_crc.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_crc.c
new file mode 100644
index 00000000..ef0c047d
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_crc.c
@@ -0,0 +1,160 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_crc.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the CRC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_crc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup CRC
+ * @brief CRC driver modules
+ * @{
+ */
+
+/** @defgroup CRC_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Resets the CRC Data register (DR).
+ * @param None
+ * @retval None
+ */
+void CRC_ResetDR(void)
+{
+ /* Reset CRC generator */
+ CRC->CR = CRC_CR_RESET;
+}
+
+/**
+ * @brief Computes the 32-bit CRC of a given data word(32-bit).
+ * @param Data: data word(32-bit) to compute its CRC
+ * @retval 32-bit CRC
+ */
+uint32_t CRC_CalcCRC(uint32_t Data)
+{
+ CRC->DR = Data;
+
+ return (CRC->DR);
+}
+
+/**
+ * @brief Computes the 32-bit CRC of a given buffer of data word(32-bit).
+ * @param pBuffer: pointer to the buffer containing the data to be computed
+ * @param BufferLength: length of the buffer to be computed
+ * @retval 32-bit CRC
+ */
+uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength)
+{
+ uint32_t index = 0;
+
+ for(index = 0; index < BufferLength; index++)
+ {
+ CRC->DR = pBuffer[index];
+ }
+ return (CRC->DR);
+}
+
+/**
+ * @brief Returns the current CRC value.
+ * @param None
+ * @retval 32-bit CRC
+ */
+uint32_t CRC_GetCRC(void)
+{
+ return (CRC->DR);
+}
+
+/**
+ * @brief Stores a 8-bit data in the Independent Data(ID) register.
+ * @param IDValue: 8-bit value to be stored in the ID register
+ * @retval None
+ */
+void CRC_SetIDRegister(uint8_t IDValue)
+{
+ CRC->IDR = IDValue;
+}
+
+/**
+ * @brief Returns the 8-bit data stored in the Independent Data(ID) register
+ * @param None
+ * @retval 8-bit value of the ID register
+ */
+uint8_t CRC_GetIDRegister(void)
+{
+ return (CRC->IDR);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_dac.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_dac.c
new file mode 100644
index 00000000..025b8e28
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_dac.c
@@ -0,0 +1,571 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_dac.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the DAC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_dac.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup DAC
+ * @brief DAC driver modules
+ * @{
+ */
+
+/** @defgroup DAC_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_Defines
+ * @{
+ */
+
+/* CR register Mask */
+#define CR_CLEAR_MASK ((uint32_t)0x00000FFE)
+
+/* DAC Dual Channels SWTRIG masks */
+#define DUAL_SWTRIG_SET ((uint32_t)0x00000003)
+#define DUAL_SWTRIG_RESET ((uint32_t)0xFFFFFFFC)
+
+/* DHR registers offsets */
+#define DHR12R1_OFFSET ((uint32_t)0x00000008)
+#define DHR12R2_OFFSET ((uint32_t)0x00000014)
+#define DHR12RD_OFFSET ((uint32_t)0x00000020)
+
+/* DOR register offset */
+#define DOR_OFFSET ((uint32_t)0x0000002C)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the DAC peripheral registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void DAC_DeInit(void)
+{
+ /* Enable DAC reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE);
+ /* Release DAC from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE);
+}
+
+/**
+ * @brief Initializes the DAC peripheral according to the specified
+ * parameters in the DAC_InitStruct.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_InitStruct: pointer to a DAC_InitTypeDef structure that
+ * contains the configuration information for the specified DAC channel.
+ * @retval None
+ */
+void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct)
+{
+ uint32_t tmpreg1 = 0, tmpreg2 = 0;
+ /* Check the DAC parameters */
+ assert_param(IS_DAC_TRIGGER(DAC_InitStruct->DAC_Trigger));
+ assert_param(IS_DAC_GENERATE_WAVE(DAC_InitStruct->DAC_WaveGeneration));
+ assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude));
+ assert_param(IS_DAC_OUTPUT_BUFFER_STATE(DAC_InitStruct->DAC_OutputBuffer));
+/*---------------------------- DAC CR Configuration --------------------------*/
+ /* Get the DAC CR value */
+ tmpreg1 = DAC->CR;
+ /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
+ tmpreg1 &= ~(CR_CLEAR_MASK << DAC_Channel);
+ /* Configure for the selected DAC channel: buffer output, trigger, wave generation,
+ mask/amplitude for wave generation */
+ /* Set TSELx and TENx bits according to DAC_Trigger value */
+ /* Set WAVEx bits according to DAC_WaveGeneration value */
+ /* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */
+ /* Set BOFFx bit according to DAC_OutputBuffer value */
+ tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration |
+ DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | DAC_InitStruct->DAC_OutputBuffer);
+ /* Calculate CR register value depending on DAC_Channel */
+ tmpreg1 |= tmpreg2 << DAC_Channel;
+ /* Write to DAC CR */
+ DAC->CR = tmpreg1;
+}
+
+/**
+ * @brief Fills each DAC_InitStruct member with its default value.
+ * @param DAC_InitStruct : pointer to a DAC_InitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct)
+{
+/*--------------- Reset DAC init structure parameters values -----------------*/
+ /* Initialize the DAC_Trigger member */
+ DAC_InitStruct->DAC_Trigger = DAC_Trigger_None;
+ /* Initialize the DAC_WaveGeneration member */
+ DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None;
+ /* Initialize the DAC_LFSRUnmask_TriangleAmplitude member */
+ DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0;
+ /* Initialize the DAC_OutputBuffer member */
+ DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable;
+}
+
+/**
+ * @brief Enables or disables the specified DAC channel.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param NewState: new state of the DAC channel.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected DAC channel */
+ DAC->CR |= (DAC_CR_EN1 << DAC_Channel);
+ }
+ else
+ {
+ /* Disable the selected DAC channel */
+ DAC->CR &= ~(DAC_CR_EN1 << DAC_Channel);
+ }
+}
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/**
+ * @brief Enables or disables the specified DAC interrupts.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_IT: specifies the DAC interrupt sources to be enabled or disabled.
+ * This parameter can be the following values:
+ * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask
+ * @param NewState: new state of the specified DAC interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ assert_param(IS_DAC_IT(DAC_IT));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected DAC interrupts */
+ DAC->CR |= (DAC_IT << DAC_Channel);
+ }
+ else
+ {
+ /* Disable the selected DAC interrupts */
+ DAC->CR &= (~(uint32_t)(DAC_IT << DAC_Channel));
+ }
+}
+#endif
+
+/**
+ * @brief Enables or disables the specified DAC channel DMA request.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param NewState: new state of the selected DAC channel DMA request.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected DAC channel DMA request */
+ DAC->CR |= (DAC_CR_DMAEN1 << DAC_Channel);
+ }
+ else
+ {
+ /* Disable the selected DAC channel DMA request */
+ DAC->CR &= ~(DAC_CR_DMAEN1 << DAC_Channel);
+ }
+}
+
+/**
+ * @brief Enables or disables the selected DAC channel software trigger.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param NewState: new state of the selected DAC channel software trigger.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable software trigger for the selected DAC channel */
+ DAC->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4);
+ }
+ else
+ {
+ /* Disable software trigger for the selected DAC channel */
+ DAC->SWTRIGR &= ~((uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4));
+ }
+}
+
+/**
+ * @brief Enables or disables simultaneously the two DAC channels software
+ * triggers.
+ * @param NewState: new state of the DAC channels software triggers.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_DualSoftwareTriggerCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable software trigger for both DAC channels */
+ DAC->SWTRIGR |= DUAL_SWTRIG_SET ;
+ }
+ else
+ {
+ /* Disable software trigger for both DAC channels */
+ DAC->SWTRIGR &= DUAL_SWTRIG_RESET;
+ }
+}
+
+/**
+ * @brief Enables or disables the selected DAC channel wave generation.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_Wave: Specifies the wave type to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg DAC_Wave_Noise: noise wave generation
+ * @arg DAC_Wave_Triangle: triangle wave generation
+ * @param NewState: new state of the selected DAC channel wave generation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_WAVE(DAC_Wave));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected wave generation for the selected DAC channel */
+ DAC->CR |= DAC_Wave << DAC_Channel;
+ }
+ else
+ {
+ /* Disable the selected wave generation for the selected DAC channel */
+ DAC->CR &= ~(DAC_Wave << DAC_Channel);
+ }
+}
+
+/**
+ * @brief Set the specified data holding register value for DAC channel1.
+ * @param DAC_Align: Specifies the data alignment for DAC channel1.
+ * This parameter can be one of the following values:
+ * @arg DAC_Align_8b_R: 8bit right data alignment selected
+ * @arg DAC_Align_12b_L: 12bit left data alignment selected
+ * @arg DAC_Align_12b_R: 12bit right data alignment selected
+ * @param Data : Data to be loaded in the selected data holding register.
+ * @retval None
+ */
+void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_ALIGN(DAC_Align));
+ assert_param(IS_DAC_DATA(Data));
+
+ tmp = (uint32_t)DAC_BASE;
+ tmp += DHR12R1_OFFSET + DAC_Align;
+
+ /* Set the DAC channel1 selected data holding register */
+ *(__IO uint32_t *) tmp = Data;
+}
+
+/**
+ * @brief Set the specified data holding register value for DAC channel2.
+ * @param DAC_Align: Specifies the data alignment for DAC channel2.
+ * This parameter can be one of the following values:
+ * @arg DAC_Align_8b_R: 8bit right data alignment selected
+ * @arg DAC_Align_12b_L: 12bit left data alignment selected
+ * @arg DAC_Align_12b_R: 12bit right data alignment selected
+ * @param Data : Data to be loaded in the selected data holding register.
+ * @retval None
+ */
+void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_ALIGN(DAC_Align));
+ assert_param(IS_DAC_DATA(Data));
+
+ tmp = (uint32_t)DAC_BASE;
+ tmp += DHR12R2_OFFSET + DAC_Align;
+
+ /* Set the DAC channel2 selected data holding register */
+ *(__IO uint32_t *)tmp = Data;
+}
+
+/**
+ * @brief Set the specified data holding register value for dual channel
+ * DAC.
+ * @param DAC_Align: Specifies the data alignment for dual channel DAC.
+ * This parameter can be one of the following values:
+ * @arg DAC_Align_8b_R: 8bit right data alignment selected
+ * @arg DAC_Align_12b_L: 12bit left data alignment selected
+ * @arg DAC_Align_12b_R: 12bit right data alignment selected
+ * @param Data2: Data for DAC Channel2 to be loaded in the selected data
+ * holding register.
+ * @param Data1: Data for DAC Channel1 to be loaded in the selected data
+ * holding register.
+ * @retval None
+ */
+void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1)
+{
+ uint32_t data = 0, tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_ALIGN(DAC_Align));
+ assert_param(IS_DAC_DATA(Data1));
+ assert_param(IS_DAC_DATA(Data2));
+
+ /* Calculate and set dual DAC data holding register value */
+ if (DAC_Align == DAC_Align_8b_R)
+ {
+ data = ((uint32_t)Data2 << 8) | Data1;
+ }
+ else
+ {
+ data = ((uint32_t)Data2 << 16) | Data1;
+ }
+
+ tmp = (uint32_t)DAC_BASE;
+ tmp += DHR12RD_OFFSET + DAC_Align;
+
+ /* Set the dual DAC selected data holding register */
+ *(__IO uint32_t *)tmp = data;
+}
+
+/**
+ * @brief Returns the last data output value of the selected DAC channel.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @retval The selected DAC channel data output value.
+ */
+uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+
+ tmp = (uint32_t) DAC_BASE ;
+ tmp += DOR_OFFSET + ((uint32_t)DAC_Channel >> 2);
+
+ /* Returns the DAC channel data output register value */
+ return (uint16_t) (*(__IO uint32_t*) tmp);
+}
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/**
+ * @brief Checks whether the specified DAC flag is set or not.
+ * @param DAC_Channel: thee selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_FLAG: specifies the flag to check.
+ * This parameter can be only of the following value:
+ * @arg DAC_FLAG_DMAUDR: DMA underrun flag
+ * @retval The new state of DAC_FLAG (SET or RESET).
+ */
+FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_FLAG(DAC_FLAG));
+
+ /* Check the status of the specified DAC flag */
+ if ((DAC->SR & (DAC_FLAG << DAC_Channel)) != (uint8_t)RESET)
+ {
+ /* DAC_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* DAC_FLAG is reset */
+ bitstatus = RESET;
+ }
+ /* Return the DAC_FLAG status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the DAC channelx's pending flags.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_FLAG: specifies the flag to clear.
+ * This parameter can be of the following value:
+ * @arg DAC_FLAG_DMAUDR: DMA underrun flag
+ * @retval None
+ */
+void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_FLAG(DAC_FLAG));
+
+ /* Clear the selected DAC flags */
+ DAC->SR = (DAC_FLAG << DAC_Channel);
+}
+
+/**
+ * @brief Checks whether the specified DAC interrupt has occurred or not.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_IT: specifies the DAC interrupt source to check.
+ * This parameter can be the following values:
+ * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask
+ * @retval The new state of DAC_IT (SET or RESET).
+ */
+ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t enablestatus = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_IT(DAC_IT));
+
+ /* Get the DAC_IT enable bit status */
+ enablestatus = (DAC->CR & (DAC_IT << DAC_Channel)) ;
+
+ /* Check the status of the specified DAC interrupt */
+ if (((DAC->SR & (DAC_IT << DAC_Channel)) != (uint32_t)RESET) && enablestatus)
+ {
+ /* DAC_IT is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* DAC_IT is reset */
+ bitstatus = RESET;
+ }
+ /* Return the DAC_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the DAC channelx's interrupt pending bits.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_IT: specifies the DAC interrupt pending bit to clear.
+ * This parameter can be the following values:
+ * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask
+ * @retval None
+ */
+void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_IT(DAC_IT));
+
+ /* Clear the selected DAC interrupt pending bits */
+ DAC->SR = (DAC_IT << DAC_Channel);
+}
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_dbgmcu.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_dbgmcu.c
new file mode 100644
index 00000000..d34307b0
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_dbgmcu.c
@@ -0,0 +1,162 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_dbgmcu.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the DBGMCU firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_dbgmcu.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup DBGMCU
+ * @brief DBGMCU driver modules
+ * @{
+ */
+
+/** @defgroup DBGMCU_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Private_Defines
+ * @{
+ */
+
+#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF)
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Returns the device revision identifier.
+ * @param None
+ * @retval Device revision identifier
+ */
+uint32_t DBGMCU_GetREVID(void)
+{
+ return(DBGMCU->IDCODE >> 16);
+}
+
+/**
+ * @brief Returns the device identifier.
+ * @param None
+ * @retval Device identifier
+ */
+uint32_t DBGMCU_GetDEVID(void)
+{
+ return(DBGMCU->IDCODE & IDCODE_DEVID_MASK);
+}
+
+/**
+ * @brief Configures the specified peripheral and low power mode behavior
+ * when the MCU under Debug mode.
+ * @param DBGMCU_Periph: specifies the peripheral and low power mode.
+ * This parameter can be any combination of the following values:
+ * @arg DBGMCU_SLEEP: Keep debugger connection during SLEEP mode
+ * @arg DBGMCU_STOP: Keep debugger connection during STOP mode
+ * @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode
+ * @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted
+ * @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted
+ * @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted
+ * @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted
+ * @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted
+ * @arg DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted
+ * @arg DBGMCU_CAN1_STOP: Debug CAN2 stopped when Core is halted
+ * @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when Core is halted
+ * @arg DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped when Core is halted
+ * @arg DBGMCU_TIM5_STOP: TIM5 counter stopped when Core is halted
+ * @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted
+ * @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted
+ * @arg DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted
+ * @arg DBGMCU_CAN2_STOP: Debug CAN2 stopped when Core is halted
+ * @arg DBGMCU_TIM15_STOP: TIM15 counter stopped when Core is halted
+ * @arg DBGMCU_TIM16_STOP: TIM16 counter stopped when Core is halted
+ * @arg DBGMCU_TIM17_STOP: TIM17 counter stopped when Core is halted
+ * @arg DBGMCU_TIM9_STOP: TIM9 counter stopped when Core is halted
+ * @arg DBGMCU_TIM10_STOP: TIM10 counter stopped when Core is halted
+ * @arg DBGMCU_TIM11_STOP: TIM11 counter stopped when Core is halted
+ * @arg DBGMCU_TIM12_STOP: TIM12 counter stopped when Core is halted
+ * @arg DBGMCU_TIM13_STOP: TIM13 counter stopped when Core is halted
+ * @arg DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted
+ * @param NewState: new state of the specified peripheral in Debug mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ DBGMCU->CR |= DBGMCU_Periph;
+ }
+ else
+ {
+ DBGMCU->CR &= ~DBGMCU_Periph;
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_dma.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_dma.c
new file mode 100644
index 00000000..0c86f901
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_dma.c
@@ -0,0 +1,714 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_dma.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the DMA firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_dma.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup DMA
+ * @brief DMA driver modules
+ * @{
+ */
+
+/** @defgroup DMA_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Private_Defines
+ * @{
+ */
+
+
+/* DMA1 Channelx interrupt pending bit masks */
+#define DMA1_Channel1_IT_Mask ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1))
+#define DMA1_Channel2_IT_Mask ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2))
+#define DMA1_Channel3_IT_Mask ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3))
+#define DMA1_Channel4_IT_Mask ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4))
+#define DMA1_Channel5_IT_Mask ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5))
+#define DMA1_Channel6_IT_Mask ((uint32_t)(DMA_ISR_GIF6 | DMA_ISR_TCIF6 | DMA_ISR_HTIF6 | DMA_ISR_TEIF6))
+#define DMA1_Channel7_IT_Mask ((uint32_t)(DMA_ISR_GIF7 | DMA_ISR_TCIF7 | DMA_ISR_HTIF7 | DMA_ISR_TEIF7))
+
+/* DMA2 Channelx interrupt pending bit masks */
+#define DMA2_Channel1_IT_Mask ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1))
+#define DMA2_Channel2_IT_Mask ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2))
+#define DMA2_Channel3_IT_Mask ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3))
+#define DMA2_Channel4_IT_Mask ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4))
+#define DMA2_Channel5_IT_Mask ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5))
+
+/* DMA2 FLAG mask */
+#define FLAG_Mask ((uint32_t)0x10000000)
+
+/* DMA registers Masks */
+#define CCR_CLEAR_Mask ((uint32_t)0xFFFF800F)
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the DMAy Channelx registers to their default reset
+ * values.
+ * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
+ * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+ * @retval None
+ */
+void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+
+ /* Disable the selected DMAy Channelx */
+ DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR1_EN);
+
+ /* Reset DMAy Channelx control register */
+ DMAy_Channelx->CCR = 0;
+
+ /* Reset DMAy Channelx remaining bytes register */
+ DMAy_Channelx->CNDTR = 0;
+
+ /* Reset DMAy Channelx peripheral address register */
+ DMAy_Channelx->CPAR = 0;
+
+ /* Reset DMAy Channelx memory address register */
+ DMAy_Channelx->CMAR = 0;
+
+ if (DMAy_Channelx == DMA1_Channel1)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel1 */
+ DMA1->IFCR |= DMA1_Channel1_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA1_Channel2)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel2 */
+ DMA1->IFCR |= DMA1_Channel2_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA1_Channel3)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel3 */
+ DMA1->IFCR |= DMA1_Channel3_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA1_Channel4)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel4 */
+ DMA1->IFCR |= DMA1_Channel4_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA1_Channel5)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel5 */
+ DMA1->IFCR |= DMA1_Channel5_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA1_Channel6)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel6 */
+ DMA1->IFCR |= DMA1_Channel6_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA1_Channel7)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel7 */
+ DMA1->IFCR |= DMA1_Channel7_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA2_Channel1)
+ {
+ /* Reset interrupt pending bits for DMA2 Channel1 */
+ DMA2->IFCR |= DMA2_Channel1_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA2_Channel2)
+ {
+ /* Reset interrupt pending bits for DMA2 Channel2 */
+ DMA2->IFCR |= DMA2_Channel2_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA2_Channel3)
+ {
+ /* Reset interrupt pending bits for DMA2 Channel3 */
+ DMA2->IFCR |= DMA2_Channel3_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA2_Channel4)
+ {
+ /* Reset interrupt pending bits for DMA2 Channel4 */
+ DMA2->IFCR |= DMA2_Channel4_IT_Mask;
+ }
+ else
+ {
+ if (DMAy_Channelx == DMA2_Channel5)
+ {
+ /* Reset interrupt pending bits for DMA2 Channel5 */
+ DMA2->IFCR |= DMA2_Channel5_IT_Mask;
+ }
+ }
+}
+
+/**
+ * @brief Initializes the DMAy Channelx according to the specified
+ * parameters in the DMA_InitStruct.
+ * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
+ * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+ * @param DMA_InitStruct: pointer to a DMA_InitTypeDef structure that
+ * contains the configuration information for the specified DMA Channel.
+ * @retval None
+ */
+void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+ assert_param(IS_DMA_DIR(DMA_InitStruct->DMA_DIR));
+ assert_param(IS_DMA_BUFFER_SIZE(DMA_InitStruct->DMA_BufferSize));
+ assert_param(IS_DMA_PERIPHERAL_INC_STATE(DMA_InitStruct->DMA_PeripheralInc));
+ assert_param(IS_DMA_MEMORY_INC_STATE(DMA_InitStruct->DMA_MemoryInc));
+ assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(DMA_InitStruct->DMA_PeripheralDataSize));
+ assert_param(IS_DMA_MEMORY_DATA_SIZE(DMA_InitStruct->DMA_MemoryDataSize));
+ assert_param(IS_DMA_MODE(DMA_InitStruct->DMA_Mode));
+ assert_param(IS_DMA_PRIORITY(DMA_InitStruct->DMA_Priority));
+ assert_param(IS_DMA_M2M_STATE(DMA_InitStruct->DMA_M2M));
+
+/*--------------------------- DMAy Channelx CCR Configuration -----------------*/
+ /* Get the DMAy_Channelx CCR value */
+ tmpreg = DMAy_Channelx->CCR;
+ /* Clear MEM2MEM, PL, MSIZE, PSIZE, MINC, PINC, CIRC and DIR bits */
+ tmpreg &= CCR_CLEAR_Mask;
+ /* Configure DMAy Channelx: data transfer, data size, priority level and mode */
+ /* Set DIR bit according to DMA_DIR value */
+ /* Set CIRC bit according to DMA_Mode value */
+ /* Set PINC bit according to DMA_PeripheralInc value */
+ /* Set MINC bit according to DMA_MemoryInc value */
+ /* Set PSIZE bits according to DMA_PeripheralDataSize value */
+ /* Set MSIZE bits according to DMA_MemoryDataSize value */
+ /* Set PL bits according to DMA_Priority value */
+ /* Set the MEM2MEM bit according to DMA_M2M value */
+ tmpreg |= DMA_InitStruct->DMA_DIR | DMA_InitStruct->DMA_Mode |
+ DMA_InitStruct->DMA_PeripheralInc | DMA_InitStruct->DMA_MemoryInc |
+ DMA_InitStruct->DMA_PeripheralDataSize | DMA_InitStruct->DMA_MemoryDataSize |
+ DMA_InitStruct->DMA_Priority | DMA_InitStruct->DMA_M2M;
+
+ /* Write to DMAy Channelx CCR */
+ DMAy_Channelx->CCR = tmpreg;
+
+/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/
+ /* Write to DMAy Channelx CNDTR */
+ DMAy_Channelx->CNDTR = DMA_InitStruct->DMA_BufferSize;
+
+/*--------------------------- DMAy Channelx CPAR Configuration ----------------*/
+ /* Write to DMAy Channelx CPAR */
+ DMAy_Channelx->CPAR = DMA_InitStruct->DMA_PeripheralBaseAddr;
+
+/*--------------------------- DMAy Channelx CMAR Configuration ----------------*/
+ /* Write to DMAy Channelx CMAR */
+ DMAy_Channelx->CMAR = DMA_InitStruct->DMA_MemoryBaseAddr;
+}
+
+/**
+ * @brief Fills each DMA_InitStruct member with its default value.
+ * @param DMA_InitStruct : pointer to a DMA_InitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct)
+{
+/*-------------- Reset DMA init structure parameters values ------------------*/
+ /* Initialize the DMA_PeripheralBaseAddr member */
+ DMA_InitStruct->DMA_PeripheralBaseAddr = 0;
+ /* Initialize the DMA_MemoryBaseAddr member */
+ DMA_InitStruct->DMA_MemoryBaseAddr = 0;
+ /* Initialize the DMA_DIR member */
+ DMA_InitStruct->DMA_DIR = DMA_DIR_PeripheralSRC;
+ /* Initialize the DMA_BufferSize member */
+ DMA_InitStruct->DMA_BufferSize = 0;
+ /* Initialize the DMA_PeripheralInc member */
+ DMA_InitStruct->DMA_PeripheralInc = DMA_PeripheralInc_Disable;
+ /* Initialize the DMA_MemoryInc member */
+ DMA_InitStruct->DMA_MemoryInc = DMA_MemoryInc_Disable;
+ /* Initialize the DMA_PeripheralDataSize member */
+ DMA_InitStruct->DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
+ /* Initialize the DMA_MemoryDataSize member */
+ DMA_InitStruct->DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
+ /* Initialize the DMA_Mode member */
+ DMA_InitStruct->DMA_Mode = DMA_Mode_Normal;
+ /* Initialize the DMA_Priority member */
+ DMA_InitStruct->DMA_Priority = DMA_Priority_Low;
+ /* Initialize the DMA_M2M member */
+ DMA_InitStruct->DMA_M2M = DMA_M2M_Disable;
+}
+
+/**
+ * @brief Enables or disables the specified DMAy Channelx.
+ * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
+ * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+ * @param NewState: new state of the DMAy Channelx.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected DMAy Channelx */
+ DMAy_Channelx->CCR |= DMA_CCR1_EN;
+ }
+ else
+ {
+ /* Disable the selected DMAy Channelx */
+ DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR1_EN);
+ }
+}
+
+/**
+ * @brief Enables or disables the specified DMAy Channelx interrupts.
+ * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
+ * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+ * @param DMA_IT: specifies the DMA interrupts sources to be enabled
+ * or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @param NewState: new state of the specified DMA interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+ assert_param(IS_DMA_CONFIG_IT(DMA_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected DMA interrupts */
+ DMAy_Channelx->CCR |= DMA_IT;
+ }
+ else
+ {
+ /* Disable the selected DMA interrupts */
+ DMAy_Channelx->CCR &= ~DMA_IT;
+ }
+}
+
+/**
+ * @brief Sets the number of data units in the current DMAy Channelx transfer.
+ * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
+ * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+ * @param DataNumber: The number of data units in the current DMAy Channelx
+ * transfer.
+ * @note This function can only be used when the DMAy_Channelx is disabled.
+ * @retval None.
+ */
+void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+
+/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/
+ /* Write to DMAy Channelx CNDTR */
+ DMAy_Channelx->CNDTR = DataNumber;
+}
+
+/**
+ * @brief Returns the number of remaining data units in the current
+ * DMAy Channelx transfer.
+ * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
+ * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+ * @retval The number of remaining data units in the current DMAy Channelx
+ * transfer.
+ */
+uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+ /* Return the number of remaining data units for DMAy Channelx */
+ return ((uint16_t)(DMAy_Channelx->CNDTR));
+}
+
+/**
+ * @brief Checks whether the specified DMAy Channelx flag is set or not.
+ * @param DMAy_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag.
+ * @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag.
+ * @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag.
+ * @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag.
+ * @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag.
+ * @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag.
+ * @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag.
+ * @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag.
+ * @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag.
+ * @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag.
+ * @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag.
+ * @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag.
+ * @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag.
+ * @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag.
+ * @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag.
+ * @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag.
+ * @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag.
+ * @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag.
+ * @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag.
+ * @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag.
+ * @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag.
+ * @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag.
+ * @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag.
+ * @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag.
+ * @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag.
+ * @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag.
+ * @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag.
+ * @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag.
+ * @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag.
+ * @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag.
+ * @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag.
+ * @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag.
+ * @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag.
+ * @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag.
+ * @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag.
+ * @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag.
+ * @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag.
+ * @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag.
+ * @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag.
+ * @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag.
+ * @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag.
+ * @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag.
+ * @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag.
+ * @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag.
+ * @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag.
+ * @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag.
+ * @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag.
+ * @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag.
+ * @retval The new state of DMAy_FLAG (SET or RESET).
+ */
+FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_GET_FLAG(DMAy_FLAG));
+
+ /* Calculate the used DMAy */
+ if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET)
+ {
+ /* Get DMA2 ISR register value */
+ tmpreg = DMA2->ISR ;
+ }
+ else
+ {
+ /* Get DMA1 ISR register value */
+ tmpreg = DMA1->ISR ;
+ }
+
+ /* Check the status of the specified DMAy flag */
+ if ((tmpreg & DMAy_FLAG) != (uint32_t)RESET)
+ {
+ /* DMAy_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* DMAy_FLAG is reset */
+ bitstatus = RESET;
+ }
+
+ /* Return the DMAy_FLAG status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the DMAy Channelx's pending flags.
+ * @param DMAy_FLAG: specifies the flag to clear.
+ * This parameter can be any combination (for the same DMA) of the following values:
+ * @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag.
+ * @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag.
+ * @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag.
+ * @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag.
+ * @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag.
+ * @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag.
+ * @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag.
+ * @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag.
+ * @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag.
+ * @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag.
+ * @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag.
+ * @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag.
+ * @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag.
+ * @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag.
+ * @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag.
+ * @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag.
+ * @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag.
+ * @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag.
+ * @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag.
+ * @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag.
+ * @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag.
+ * @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag.
+ * @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag.
+ * @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag.
+ * @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag.
+ * @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag.
+ * @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag.
+ * @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag.
+ * @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag.
+ * @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag.
+ * @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag.
+ * @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag.
+ * @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag.
+ * @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag.
+ * @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag.
+ * @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag.
+ * @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag.
+ * @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag.
+ * @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag.
+ * @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag.
+ * @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag.
+ * @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag.
+ * @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag.
+ * @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag.
+ * @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag.
+ * @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag.
+ * @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag.
+ * @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag.
+ * @retval None
+ */
+void DMA_ClearFlag(uint32_t DMAy_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_CLEAR_FLAG(DMAy_FLAG));
+
+ /* Calculate the used DMAy */
+ if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET)
+ {
+ /* Clear the selected DMAy flags */
+ DMA2->IFCR = DMAy_FLAG;
+ }
+ else
+ {
+ /* Clear the selected DMAy flags */
+ DMA1->IFCR = DMAy_FLAG;
+ }
+}
+
+/**
+ * @brief Checks whether the specified DMAy Channelx interrupt has occurred or not.
+ * @param DMAy_IT: specifies the DMAy interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt.
+ * @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt.
+ * @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt.
+ * @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt.
+ * @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt.
+ * @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt.
+ * @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt.
+ * @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt.
+ * @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt.
+ * @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt.
+ * @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt.
+ * @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt.
+ * @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt.
+ * @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt.
+ * @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt.
+ * @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt.
+ * @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt.
+ * @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt.
+ * @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt.
+ * @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt.
+ * @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt.
+ * @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt.
+ * @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt.
+ * @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt.
+ * @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt.
+ * @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt.
+ * @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt.
+ * @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt.
+ * @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt.
+ * @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt.
+ * @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt.
+ * @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt.
+ * @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt.
+ * @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt.
+ * @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt.
+ * @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt.
+ * @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt.
+ * @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt.
+ * @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt.
+ * @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt.
+ * @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt.
+ * @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt.
+ * @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt.
+ * @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt.
+ * @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt.
+ * @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt.
+ * @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt.
+ * @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt.
+ * @retval The new state of DMAy_IT (SET or RESET).
+ */
+ITStatus DMA_GetITStatus(uint32_t DMAy_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_GET_IT(DMAy_IT));
+
+ /* Calculate the used DMA */
+ if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET)
+ {
+ /* Get DMA2 ISR register value */
+ tmpreg = DMA2->ISR;
+ }
+ else
+ {
+ /* Get DMA1 ISR register value */
+ tmpreg = DMA1->ISR;
+ }
+
+ /* Check the status of the specified DMAy interrupt */
+ if ((tmpreg & DMAy_IT) != (uint32_t)RESET)
+ {
+ /* DMAy_IT is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* DMAy_IT is reset */
+ bitstatus = RESET;
+ }
+ /* Return the DMA_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the DMAy Channelx's interrupt pending bits.
+ * @param DMAy_IT: specifies the DMAy interrupt pending bit to clear.
+ * This parameter can be any combination (for the same DMA) of the following values:
+ * @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt.
+ * @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt.
+ * @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt.
+ * @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt.
+ * @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt.
+ * @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt.
+ * @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt.
+ * @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt.
+ * @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt.
+ * @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt.
+ * @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt.
+ * @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt.
+ * @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt.
+ * @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt.
+ * @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt.
+ * @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt.
+ * @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt.
+ * @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt.
+ * @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt.
+ * @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt.
+ * @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt.
+ * @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt.
+ * @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt.
+ * @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt.
+ * @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt.
+ * @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt.
+ * @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt.
+ * @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt.
+ * @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt.
+ * @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt.
+ * @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt.
+ * @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt.
+ * @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt.
+ * @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt.
+ * @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt.
+ * @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt.
+ * @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt.
+ * @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt.
+ * @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt.
+ * @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt.
+ * @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt.
+ * @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt.
+ * @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt.
+ * @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt.
+ * @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt.
+ * @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt.
+ * @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt.
+ * @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt.
+ * @retval None
+ */
+void DMA_ClearITPendingBit(uint32_t DMAy_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_CLEAR_IT(DMAy_IT));
+
+ /* Calculate the used DMAy */
+ if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET)
+ {
+ /* Clear the selected DMAy interrupt pending bits */
+ DMA2->IFCR = DMAy_IT;
+ }
+ else
+ {
+ /* Clear the selected DMAy interrupt pending bits */
+ DMA1->IFCR = DMAy_IT;
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_exti.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_exti.c
new file mode 100644
index 00000000..ab734627
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_exti.c
@@ -0,0 +1,269 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_exti.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the EXTI firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_exti.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup EXTI
+ * @brief EXTI driver modules
+ * @{
+ */
+
+/** @defgroup EXTI_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Private_Defines
+ * @{
+ */
+
+#define EXTI_LINENONE ((uint32_t)0x00000) /* No interrupt selected */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the EXTI peripheral registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void EXTI_DeInit(void)
+{
+ EXTI->IMR = 0x00000000;
+ EXTI->EMR = 0x00000000;
+ EXTI->RTSR = 0x00000000;
+ EXTI->FTSR = 0x00000000;
+ EXTI->PR = 0x000FFFFF;
+}
+
+/**
+ * @brief Initializes the EXTI peripheral according to the specified
+ * parameters in the EXTI_InitStruct.
+ * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure
+ * that contains the configuration information for the EXTI peripheral.
+ * @retval None
+ */
+void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct)
+{
+ uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode));
+ assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger));
+ assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line));
+ assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd));
+
+ tmp = (uint32_t)EXTI_BASE;
+
+ if (EXTI_InitStruct->EXTI_LineCmd != DISABLE)
+ {
+ /* Clear EXTI line configuration */
+ EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line;
+ EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line;
+
+ tmp += EXTI_InitStruct->EXTI_Mode;
+
+ *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line;
+
+ /* Clear Rising Falling edge configuration */
+ EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line;
+ EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line;
+
+ /* Select the trigger for the selected external interrupts */
+ if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling)
+ {
+ /* Rising Falling edge */
+ EXTI->RTSR |= EXTI_InitStruct->EXTI_Line;
+ EXTI->FTSR |= EXTI_InitStruct->EXTI_Line;
+ }
+ else
+ {
+ tmp = (uint32_t)EXTI_BASE;
+ tmp += EXTI_InitStruct->EXTI_Trigger;
+
+ *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line;
+ }
+ }
+ else
+ {
+ tmp += EXTI_InitStruct->EXTI_Mode;
+
+ /* Disable the selected external lines */
+ *(__IO uint32_t *) tmp &= ~EXTI_InitStruct->EXTI_Line;
+ }
+}
+
+/**
+ * @brief Fills each EXTI_InitStruct member with its reset value.
+ * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct)
+{
+ EXTI_InitStruct->EXTI_Line = EXTI_LINENONE;
+ EXTI_InitStruct->EXTI_Mode = EXTI_Mode_Interrupt;
+ EXTI_InitStruct->EXTI_Trigger = EXTI_Trigger_Falling;
+ EXTI_InitStruct->EXTI_LineCmd = DISABLE;
+}
+
+/**
+ * @brief Generates a Software interrupt.
+ * @param EXTI_Line: specifies the EXTI lines to be enabled or disabled.
+ * This parameter can be any combination of EXTI_Linex where x can be (0..19).
+ * @retval None
+ */
+void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line)
+{
+ /* Check the parameters */
+ assert_param(IS_EXTI_LINE(EXTI_Line));
+
+ EXTI->SWIER |= EXTI_Line;
+}
+
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param EXTI_Line: specifies the EXTI line flag to check.
+ * This parameter can be:
+ * @arg EXTI_Linex: External interrupt line x where x(0..19)
+ * @retval The new state of EXTI_Line (SET or RESET).
+ */
+FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_GET_EXTI_LINE(EXTI_Line));
+
+ if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the EXTI's line pending flags.
+ * @param EXTI_Line: specifies the EXTI lines flags to clear.
+ * This parameter can be any combination of EXTI_Linex where x can be (0..19).
+ * @retval None
+ */
+void EXTI_ClearFlag(uint32_t EXTI_Line)
+{
+ /* Check the parameters */
+ assert_param(IS_EXTI_LINE(EXTI_Line));
+
+ EXTI->PR = EXTI_Line;
+}
+
+/**
+ * @brief Checks whether the specified EXTI line is asserted or not.
+ * @param EXTI_Line: specifies the EXTI line to check.
+ * This parameter can be:
+ * @arg EXTI_Linex: External interrupt line x where x(0..19)
+ * @retval The new state of EXTI_Line (SET or RESET).
+ */
+ITStatus EXTI_GetITStatus(uint32_t EXTI_Line)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t enablestatus = 0;
+ /* Check the parameters */
+ assert_param(IS_GET_EXTI_LINE(EXTI_Line));
+
+ enablestatus = EXTI->IMR & EXTI_Line;
+ if (((EXTI->PR & EXTI_Line) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET))
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the EXTI's line pending bits.
+ * @param EXTI_Line: specifies the EXTI lines to clear.
+ * This parameter can be any combination of EXTI_Linex where x can be (0..19).
+ * @retval None
+ */
+void EXTI_ClearITPendingBit(uint32_t EXTI_Line)
+{
+ /* Check the parameters */
+ assert_param(IS_EXTI_LINE(EXTI_Line));
+
+ EXTI->PR = EXTI_Line;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_flash.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_flash.c
new file mode 100644
index 00000000..f6c7bf17
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_flash.c
@@ -0,0 +1,1684 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_flash.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the FLASH firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_flash.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup FLASH
+ * @brief FLASH driver modules
+ * @{
+ */
+
+/** @defgroup FLASH_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_Defines
+ * @{
+ */
+
+/* Flash Access Control Register bits */
+#define ACR_LATENCY_Mask ((uint32_t)0x00000038)
+#define ACR_HLFCYA_Mask ((uint32_t)0xFFFFFFF7)
+#define ACR_PRFTBE_Mask ((uint32_t)0xFFFFFFEF)
+
+/* Flash Access Control Register bits */
+#define ACR_PRFTBS_Mask ((uint32_t)0x00000020)
+
+/* Flash Control Register bits */
+#define CR_PG_Set ((uint32_t)0x00000001)
+#define CR_PG_Reset ((uint32_t)0x00001FFE)
+#define CR_PER_Set ((uint32_t)0x00000002)
+#define CR_PER_Reset ((uint32_t)0x00001FFD)
+#define CR_MER_Set ((uint32_t)0x00000004)
+#define CR_MER_Reset ((uint32_t)0x00001FFB)
+#define CR_OPTPG_Set ((uint32_t)0x00000010)
+#define CR_OPTPG_Reset ((uint32_t)0x00001FEF)
+#define CR_OPTER_Set ((uint32_t)0x00000020)
+#define CR_OPTER_Reset ((uint32_t)0x00001FDF)
+#define CR_STRT_Set ((uint32_t)0x00000040)
+#define CR_LOCK_Set ((uint32_t)0x00000080)
+
+/* FLASH Mask */
+#define RDPRT_Mask ((uint32_t)0x00000002)
+#define WRP0_Mask ((uint32_t)0x000000FF)
+#define WRP1_Mask ((uint32_t)0x0000FF00)
+#define WRP2_Mask ((uint32_t)0x00FF0000)
+#define WRP3_Mask ((uint32_t)0xFF000000)
+#define OB_USER_BFB2 ((uint16_t)0x0008)
+
+/* FLASH Keys */
+#define RDP_Key ((uint16_t)0x00A5)
+#define FLASH_KEY1 ((uint32_t)0x45670123)
+#define FLASH_KEY2 ((uint32_t)0xCDEF89AB)
+
+/* FLASH BANK address */
+#define FLASH_BANK1_END_ADDRESS ((uint32_t)0x807FFFF)
+
+/* Delay definition */
+#define EraseTimeout ((uint32_t)0x000B0000)
+#define ProgramTimeout ((uint32_t)0x00002000)
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_Functions
+ * @{
+ */
+
+/**
+@code
+
+ This driver provides functions to configure and program the Flash memory of all STM32F10x devices,
+ including the latest STM32F10x_XL density devices.
+
+ STM32F10x_XL devices feature up to 1 Mbyte with dual bank architecture for read-while-write (RWW) capability:
+ - bank1: fixed size of 512 Kbytes (256 pages of 2Kbytes each)
+ - bank2: up to 512 Kbytes (up to 256 pages of 2Kbytes each)
+ While other STM32F10x devices features only one bank with memory up to 512 Kbytes.
+
+ In version V3.3.0, some functions were updated and new ones were added to support
+ STM32F10x_XL devices. Thus some functions manages all devices, while other are
+ dedicated for XL devices only.
+
+ The table below presents the list of available functions depending on the used STM32F10x devices.
+
+ ***************************************************
+ * Legacy functions used for all STM32F10x devices *
+ ***************************************************
+ +----------------------------------------------------------------------------------------------------------------------------------+
+ | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments |
+ | | devices | devices | |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_SetLatency | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_HalfCycleAccessCmd | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_PrefetchBufferCmd | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_Unlock | Yes | Yes | - For STM32F10X_XL devices: unlock Bank1 and Bank2. |
+ | | | | - For other devices: unlock Bank1 and it is equivalent |
+ | | | | to FLASH_UnlockBank1 function. |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_Lock | Yes | Yes | - For STM32F10X_XL devices: lock Bank1 and Bank2. |
+ | | | | - For other devices: lock Bank1 and it is equivalent |
+ | | | | to FLASH_LockBank1 function. |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ErasePage | Yes | Yes | - For STM32F10x_XL devices: erase a page in Bank1 and Bank2 |
+ | | | | - For other devices: erase a page in Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_EraseAllPages | Yes | Yes | - For STM32F10x_XL devices: erase all pages in Bank1 and Bank2 |
+ | | | | - For other devices: erase all pages in Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_EraseOptionBytes | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ProgramWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ProgramHalfWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ProgramOptionByteData | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_EnableWriteProtection | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ReadOutProtection | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_UserOptionByteConfig | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetUserOptionByte | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetWriteProtectionOptionByte | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetReadOutProtectionStatus | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetPrefetchBufferStatus | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ITConfig | Yes | Yes | - For STM32F10x_XL devices: enable Bank1 and Bank2's interrupts|
+ | | | | - For other devices: enable Bank1's interrupts |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetFlagStatus | Yes | Yes | - For STM32F10x_XL devices: return Bank1 and Bank2's flag status|
+ | | | | - For other devices: return Bank1's flag status |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ClearFlag | Yes | Yes | - For STM32F10x_XL devices: clear Bank1 and Bank2's flag |
+ | | | | - For other devices: clear Bank1's flag |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetStatus | Yes | Yes | - Return the status of Bank1 (for all devices) |
+ | | | | equivalent to FLASH_GetBank1Status function |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_WaitForLastOperation | Yes | Yes | - Wait for Bank1 last operation (for all devices) |
+ | | | | equivalent to: FLASH_WaitForLastBank1Operation function |
+ +----------------------------------------------------------------------------------------------------------------------------------+
+
+ ************************************************************************************************************************
+ * New functions used for all STM32F10x devices to manage Bank1: *
+ * - These functions are mainly useful for STM32F10x_XL density devices, to have separate control for Bank1 and bank2 *
+ * - For other devices, these functions are optional (covered by functions listed above) *
+ ************************************************************************************************************************
+ +----------------------------------------------------------------------------------------------------------------------------------+
+ | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments |
+ | | devices | devices | |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_UnlockBank1 | Yes | Yes | - Unlock Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_LockBank1 | Yes | Yes | - Lock Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_EraseAllBank1Pages | Yes | Yes | - Erase all pages in Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_GetBank1Status | Yes | Yes | - Return the status of Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_WaitForLastBank1Operation | Yes | Yes | - Wait for Bank1 last operation |
+ +----------------------------------------------------------------------------------------------------------------------------------+
+
+ *****************************************************************************
+ * New Functions used only with STM32F10x_XL density devices to manage Bank2 *
+ *****************************************************************************
+ +----------------------------------------------------------------------------------------------------------------------------------+
+ | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments |
+ | | devices | devices | |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_UnlockBank2 | Yes | No | - Unlock Bank2 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_LockBank2 | Yes | No | - Lock Bank2 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_EraseAllBank2Pages | Yes | No | - Erase all pages in Bank2 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_GetBank2Status | Yes | No | - Return the status of Bank2 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_WaitForLastBank2Operation | Yes | No | - Wait for Bank2 last operation |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_BootConfig | Yes | No | - Configure to boot from Bank1 or Bank2 |
+ +----------------------------------------------------------------------------------------------------------------------------------+
+@endcode
+*/
+
+
+/**
+ * @brief Sets the code latency value.
+ * @note This function can be used for all STM32F10x devices.
+ * @param FLASH_Latency: specifies the FLASH Latency value.
+ * This parameter can be one of the following values:
+ * @arg FLASH_Latency_0: FLASH Zero Latency cycle
+ * @arg FLASH_Latency_1: FLASH One Latency cycle
+ * @arg FLASH_Latency_2: FLASH Two Latency cycles
+ * @retval None
+ */
+void FLASH_SetLatency(uint32_t FLASH_Latency)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_LATENCY(FLASH_Latency));
+
+ /* Read the ACR register */
+ tmpreg = FLASH->ACR;
+
+ /* Sets the Latency value */
+ tmpreg &= ACR_LATENCY_Mask;
+ tmpreg |= FLASH_Latency;
+
+ /* Write the ACR register */
+ FLASH->ACR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the Half cycle flash access.
+ * @note This function can be used for all STM32F10x devices.
+ * @param FLASH_HalfCycleAccess: specifies the FLASH Half cycle Access mode.
+ * This parameter can be one of the following values:
+ * @arg FLASH_HalfCycleAccess_Enable: FLASH Half Cycle Enable
+ * @arg FLASH_HalfCycleAccess_Disable: FLASH Half Cycle Disable
+ * @retval None
+ */
+void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_HALFCYCLEACCESS_STATE(FLASH_HalfCycleAccess));
+
+ /* Enable or disable the Half cycle access */
+ FLASH->ACR &= ACR_HLFCYA_Mask;
+ FLASH->ACR |= FLASH_HalfCycleAccess;
+}
+
+/**
+ * @brief Enables or disables the Prefetch Buffer.
+ * @note This function can be used for all STM32F10x devices.
+ * @param FLASH_PrefetchBuffer: specifies the Prefetch buffer status.
+ * This parameter can be one of the following values:
+ * @arg FLASH_PrefetchBuffer_Enable: FLASH Prefetch Buffer Enable
+ * @arg FLASH_PrefetchBuffer_Disable: FLASH Prefetch Buffer Disable
+ * @retval None
+ */
+void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_PREFETCHBUFFER_STATE(FLASH_PrefetchBuffer));
+
+ /* Enable or disable the Prefetch Buffer */
+ FLASH->ACR &= ACR_PRFTBE_Mask;
+ FLASH->ACR |= FLASH_PrefetchBuffer;
+}
+
+/**
+ * @brief Unlocks the FLASH Program Erase Controller.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function unlocks Bank1 and Bank2.
+ * - For all other devices it unlocks Bank1 and it is equivalent
+ * to FLASH_UnlockBank1 function..
+ * @param None
+ * @retval None
+ */
+void FLASH_Unlock(void)
+{
+ /* Authorize the FPEC of Bank1 Access */
+ FLASH->KEYR = FLASH_KEY1;
+ FLASH->KEYR = FLASH_KEY2;
+
+#ifdef STM32F10X_XL
+ /* Authorize the FPEC of Bank2 Access */
+ FLASH->KEYR2 = FLASH_KEY1;
+ FLASH->KEYR2 = FLASH_KEY2;
+#endif /* STM32F10X_XL */
+}
+/**
+ * @brief Unlocks the FLASH Bank1 Program Erase Controller.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function unlocks Bank1.
+ * - For all other devices it unlocks Bank1 and it is
+ * equivalent to FLASH_Unlock function.
+ * @param None
+ * @retval None
+ */
+void FLASH_UnlockBank1(void)
+{
+ /* Authorize the FPEC of Bank1 Access */
+ FLASH->KEYR = FLASH_KEY1;
+ FLASH->KEYR = FLASH_KEY2;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Unlocks the FLASH Bank2 Program Erase Controller.
+ * @note This function can be used only for STM32F10X_XL density devices.
+ * @param None
+ * @retval None
+ */
+void FLASH_UnlockBank2(void)
+{
+ /* Authorize the FPEC of Bank2 Access */
+ FLASH->KEYR2 = FLASH_KEY1;
+ FLASH->KEYR2 = FLASH_KEY2;
+
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @brief Locks the FLASH Program Erase Controller.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function Locks Bank1 and Bank2.
+ * - For all other devices it Locks Bank1 and it is equivalent
+ * to FLASH_LockBank1 function.
+ * @param None
+ * @retval None
+ */
+void FLASH_Lock(void)
+{
+ /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */
+ FLASH->CR |= CR_LOCK_Set;
+
+#ifdef STM32F10X_XL
+ /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */
+ FLASH->CR2 |= CR_LOCK_Set;
+#endif /* STM32F10X_XL */
+}
+
+/**
+ * @brief Locks the FLASH Bank1 Program Erase Controller.
+ * @note this function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function Locks Bank1.
+ * - For all other devices it Locks Bank1 and it is equivalent
+ * to FLASH_Lock function.
+ * @param None
+ * @retval None
+ */
+void FLASH_LockBank1(void)
+{
+ /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */
+ FLASH->CR |= CR_LOCK_Set;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Locks the FLASH Bank2 Program Erase Controller.
+ * @note This function can be used only for STM32F10X_XL density devices.
+ * @param None
+ * @retval None
+ */
+void FLASH_LockBank2(void)
+{
+ /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */
+ FLASH->CR2 |= CR_LOCK_Set;
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @brief Erases a specified FLASH page.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Page_Address: The page address to be erased.
+ * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ErasePage(uint32_t Page_Address)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Page_Address));
+
+#ifdef STM32F10X_XL
+ if(Page_Address < FLASH_BANK1_END_ADDRESS)
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase the page */
+ FLASH->CR|= CR_PER_Set;
+ FLASH->AR = Page_Address;
+ FLASH->CR|= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ /* Disable the PER Bit */
+ FLASH->CR &= CR_PER_Reset;
+ }
+ }
+ else
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase the page */
+ FLASH->CR2|= CR_PER_Set;
+ FLASH->AR2 = Page_Address;
+ FLASH->CR2|= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+
+ /* Disable the PER Bit */
+ FLASH->CR2 &= CR_PER_Reset;
+ }
+ }
+#else
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase the page */
+ FLASH->CR|= CR_PER_Set;
+ FLASH->AR = Page_Address;
+ FLASH->CR|= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ /* Disable the PER Bit */
+ FLASH->CR &= CR_PER_Reset;
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the Erase Status */
+ return status;
+}
+
+/**
+ * @brief Erases all FLASH pages.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EraseAllPages(void)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+#ifdef STM32F10X_XL
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR |= CR_MER_Set;
+ FLASH->CR |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR &= CR_MER_Reset;
+ }
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR2 |= CR_MER_Set;
+ FLASH->CR2 |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR2 &= CR_MER_Reset;
+ }
+#else
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR |= CR_MER_Set;
+ FLASH->CR |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR &= CR_MER_Reset;
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the Erase Status */
+ return status;
+}
+
+/**
+ * @brief Erases all Bank1 FLASH pages.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function erases all Bank1 pages.
+ * - For all other devices it erases all Bank1 pages and it is equivalent
+ * to FLASH_EraseAllPages function.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EraseAllBank1Pages(void)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR |= CR_MER_Set;
+ FLASH->CR |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR &= CR_MER_Reset;
+ }
+ /* Return the Erase Status */
+ return status;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Erases all Bank2 FLASH pages.
+ * @note This function can be used only for STM32F10x_XL density devices.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EraseAllBank2Pages(void)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR2 |= CR_MER_Set;
+ FLASH->CR2 |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR2 &= CR_MER_Reset;
+ }
+ /* Return the Erase Status */
+ return status;
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @brief Erases the FLASH option bytes.
+ * @note This functions erases all option bytes except the Read protection (RDP).
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EraseOptionBytes(void)
+{
+ uint16_t rdptmp = RDP_Key;
+
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Get the actual read protection Option Byte value */
+ if(FLASH_GetReadOutProtectionStatus() != RESET)
+ {
+ rdptmp = 0x00;
+ }
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* Authorize the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+
+ /* if the previous operation is completed, proceed to erase the option bytes */
+ FLASH->CR |= CR_OPTER_Set;
+ FLASH->CR |= CR_STRT_Set;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the erase operation is completed, disable the OPTER Bit */
+ FLASH->CR &= CR_OPTER_Reset;
+
+ /* Enable the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+ /* Restore the last read protection Option Byte value */
+ OB->RDP = (uint16_t)rdptmp;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ else
+ {
+ if (status != FLASH_TIMEOUT)
+ {
+ /* Disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ }
+ /* Return the erase status */
+ return status;
+}
+
+/**
+ * @brief Programs a word at a specified address.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Address: specifies the address to be programmed.
+ * @param Data: specifies the data to be programmed.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+#ifdef STM32F10X_XL
+ if(Address < FLASH_BANK1_END_ADDRESS - 2)
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new first
+ half word */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = (uint16_t)Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new second
+ half word */
+ tmp = Address + 2;
+
+ *(__IO uint16_t*) tmp = Data >> 16;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ }
+ }
+ else if(Address == (FLASH_BANK1_END_ADDRESS - 1))
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new first
+ half word */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = (uint16_t)Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new second
+ half word */
+ FLASH->CR2 |= CR_PG_Set;
+ tmp = Address + 2;
+
+ *(__IO uint16_t*) tmp = Data >> 16;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ }
+ else
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new first
+ half word */
+ FLASH->CR2 |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = (uint16_t)Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new second
+ half word */
+ tmp = Address + 2;
+
+ *(__IO uint16_t*) tmp = Data >> 16;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ }
+ }
+#else
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new first
+ half word */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = (uint16_t)Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new second
+ half word */
+ tmp = Address + 2;
+
+ *(__IO uint16_t*) tmp = Data >> 16;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the Program Status */
+ return status;
+}
+
+/**
+ * @brief Programs a half word at a specified address.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Address: specifies the address to be programmed.
+ * @param Data: specifies the data to be programmed.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+#ifdef STM32F10X_XL
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(Address < FLASH_BANK1_END_ADDRESS)
+ {
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new data */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ }
+ else
+ {
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new data */
+ FLASH->CR2 |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ }
+#else
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new data */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the Program Status */
+ return status;
+}
+
+/**
+ * @brief Programs a half word at a specified Option Byte Data address.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Address: specifies the address to be programmed.
+ * This parameter can be 0x1FFFF804 or 0x1FFFF806.
+ * @param Data: specifies the data to be programmed.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Check the parameters */
+ assert_param(IS_OB_DATA_ADDRESS(Address));
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* Authorize the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+ /* Enables the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+ *(__IO uint16_t*)Address = Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ /* Return the Option Byte Data Program Status */
+ return status;
+}
+
+/**
+ * @brief Write protects the desired pages
+ * @note This function can be used for all STM32F10x devices.
+ * @param FLASH_Pages: specifies the address of the pages to be write protected.
+ * This parameter can be:
+ * @arg For @b STM32_Low-density_devices: value between FLASH_WRProt_Pages0to3 and FLASH_WRProt_Pages28to31
+ * @arg For @b STM32_Medium-density_devices: value between FLASH_WRProt_Pages0to3
+ * and FLASH_WRProt_Pages124to127
+ * @arg For @b STM32_High-density_devices: value between FLASH_WRProt_Pages0to1 and
+ * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to255
+ * @arg For @b STM32_Connectivity_line_devices: value between FLASH_WRProt_Pages0to1 and
+ * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to127
+ * @arg For @b STM32_XL-density_devices: value between FLASH_WRProt_Pages0to1 and
+ * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to511
+ * @arg FLASH_WRProt_AllPages
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages)
+{
+ uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF;
+
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_WRPROT_PAGE(FLASH_Pages));
+
+ FLASH_Pages = (uint32_t)(~FLASH_Pages);
+ WRP0_Data = (uint16_t)(FLASH_Pages & WRP0_Mask);
+ WRP1_Data = (uint16_t)((FLASH_Pages & WRP1_Mask) >> 8);
+ WRP2_Data = (uint16_t)((FLASH_Pages & WRP2_Mask) >> 16);
+ WRP3_Data = (uint16_t)((FLASH_Pages & WRP3_Mask) >> 24);
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* Authorizes the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+ FLASH->CR |= CR_OPTPG_Set;
+ if(WRP0_Data != 0xFF)
+ {
+ OB->WRP0 = WRP0_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ }
+ if((status == FLASH_COMPLETE) && (WRP1_Data != 0xFF))
+ {
+ OB->WRP1 = WRP1_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ }
+ if((status == FLASH_COMPLETE) && (WRP2_Data != 0xFF))
+ {
+ OB->WRP2 = WRP2_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ }
+
+ if((status == FLASH_COMPLETE)&& (WRP3_Data != 0xFF))
+ {
+ OB->WRP3 = WRP3_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ }
+
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ /* Return the write protection operation Status */
+ return status;
+}
+
+/**
+ * @brief Enables or disables the read out protection.
+ * @note If the user has already programmed the other option bytes before calling
+ * this function, he must re-program them since this function erases all option bytes.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Newstate: new state of the ReadOut Protection.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* Authorizes the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+ FLASH->CR |= CR_OPTER_Set;
+ FLASH->CR |= CR_STRT_Set;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the erase operation is completed, disable the OPTER Bit */
+ FLASH->CR &= CR_OPTER_Reset;
+ /* Enable the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+ if(NewState != DISABLE)
+ {
+ OB->RDP = 0x00;
+ }
+ else
+ {
+ OB->RDP = RDP_Key;
+ }
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ else
+ {
+ if(status != FLASH_TIMEOUT)
+ {
+ /* Disable the OPTER Bit */
+ FLASH->CR &= CR_OPTER_Reset;
+ }
+ }
+ }
+ /* Return the protection operation Status */
+ return status;
+}
+
+/**
+ * @brief Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.
+ * @note This function can be used for all STM32F10x devices.
+ * @param OB_IWDG: Selects the IWDG mode
+ * This parameter can be one of the following values:
+ * @arg OB_IWDG_SW: Software IWDG selected
+ * @arg OB_IWDG_HW: Hardware IWDG selected
+ * @param OB_STOP: Reset event when entering STOP mode.
+ * This parameter can be one of the following values:
+ * @arg OB_STOP_NoRST: No reset generated when entering in STOP
+ * @arg OB_STOP_RST: Reset generated when entering in STOP
+ * @param OB_STDBY: Reset event when entering Standby mode.
+ * This parameter can be one of the following values:
+ * @arg OB_STDBY_NoRST: No reset generated when entering in STANDBY
+ * @arg OB_STDBY_RST: Reset generated when entering in STANDBY
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check the parameters */
+ assert_param(IS_OB_IWDG_SOURCE(OB_IWDG));
+ assert_param(IS_OB_STOP_SOURCE(OB_STOP));
+ assert_param(IS_OB_STDBY_SOURCE(OB_STDBY));
+
+ /* Authorize the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* Enable the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+
+ OB->USER = OB_IWDG | (uint16_t)(OB_STOP | (uint16_t)(OB_STDBY | ((uint16_t)0xF8)));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ /* Return the Option Byte program Status */
+ return status;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Configures to boot from Bank1 or Bank2.
+ * @note This function can be used only for STM32F10x_XL density devices.
+ * @param FLASH_BOOT: select the FLASH Bank to boot from.
+ * This parameter can be one of the following values:
+ * @arg FLASH_BOOT_Bank1: At startup, if boot pins are set in boot from user Flash
+ * position and this parameter is selected the device will boot from Bank1(Default).
+ * @arg FLASH_BOOT_Bank2: At startup, if boot pins are set in boot from user Flash
+ * position and this parameter is selected the device will boot from Bank2 or Bank1,
+ * depending on the activation of the bank. The active banks are checked in
+ * the following order: Bank2, followed by Bank1.
+ * The active bank is recognized by the value programmed at the base address
+ * of the respective bank (corresponding to the initial stack pointer value
+ * in the interrupt vector table).
+ * For more information, please refer to AN2606 from www.st.com.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ assert_param(IS_FLASH_BOOT(FLASH_BOOT));
+ /* Authorize the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* Enable the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+
+ if(FLASH_BOOT == FLASH_BOOT_Bank1)
+ {
+ OB->USER |= OB_USER_BFB2;
+ }
+ else
+ {
+ OB->USER &= (uint16_t)(~(uint16_t)(OB_USER_BFB2));
+ }
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ /* Return the Option Byte program Status */
+ return status;
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @brief Returns the FLASH User Option Bytes values.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1)
+ * and RST_STDBY(Bit2).
+ */
+uint32_t FLASH_GetUserOptionByte(void)
+{
+ /* Return the User Option Byte */
+ return (uint32_t)(FLASH->OBR >> 2);
+}
+
+/**
+ * @brief Returns the FLASH Write Protection Option Bytes Register value.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval The FLASH Write Protection Option Bytes Register value
+ */
+uint32_t FLASH_GetWriteProtectionOptionByte(void)
+{
+ /* Return the Flash write protection Register value */
+ return (uint32_t)(FLASH->WRPR);
+}
+
+/**
+ * @brief Checks whether the FLASH Read Out Protection Status is set or not.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval FLASH ReadOut Protection Status(SET or RESET)
+ */
+FlagStatus FLASH_GetReadOutProtectionStatus(void)
+{
+ FlagStatus readoutstatus = RESET;
+ if ((FLASH->OBR & RDPRT_Mask) != (uint32_t)RESET)
+ {
+ readoutstatus = SET;
+ }
+ else
+ {
+ readoutstatus = RESET;
+ }
+ return readoutstatus;
+}
+
+/**
+ * @brief Checks whether the FLASH Prefetch Buffer status is set or not.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval FLASH Prefetch Buffer Status (SET or RESET).
+ */
+FlagStatus FLASH_GetPrefetchBufferStatus(void)
+{
+ FlagStatus bitstatus = RESET;
+
+ if ((FLASH->ACR & ACR_PRFTBS_Mask) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ /* Return the new state of FLASH Prefetch Buffer Status (SET or RESET) */
+ return bitstatus;
+}
+
+/**
+ * @brief Enables or disables the specified FLASH interrupts.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices, enables or disables the specified FLASH interrupts
+ for Bank1 and Bank2.
+ * - For other devices it enables or disables the specified FLASH interrupts for Bank1.
+ * @param FLASH_IT: specifies the FLASH interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_ERROR: FLASH Error Interrupt
+ * @arg FLASH_IT_EOP: FLASH end of operation Interrupt
+ * @param NewState: new state of the specified Flash interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState)
+{
+#ifdef STM32F10X_XL
+ /* Check the parameters */
+ assert_param(IS_FLASH_IT(FLASH_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if((FLASH_IT & 0x80000000) != 0x0)
+ {
+ if(NewState != DISABLE)
+ {
+ /* Enable the interrupt sources */
+ FLASH->CR2 |= (FLASH_IT & 0x7FFFFFFF);
+ }
+ else
+ {
+ /* Disable the interrupt sources */
+ FLASH->CR2 &= ~(uint32_t)(FLASH_IT & 0x7FFFFFFF);
+ }
+ }
+ else
+ {
+ if(NewState != DISABLE)
+ {
+ /* Enable the interrupt sources */
+ FLASH->CR |= FLASH_IT;
+ }
+ else
+ {
+ /* Disable the interrupt sources */
+ FLASH->CR &= ~(uint32_t)FLASH_IT;
+ }
+ }
+#else
+ /* Check the parameters */
+ assert_param(IS_FLASH_IT(FLASH_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if(NewState != DISABLE)
+ {
+ /* Enable the interrupt sources */
+ FLASH->CR |= FLASH_IT;
+ }
+ else
+ {
+ /* Disable the interrupt sources */
+ FLASH->CR &= ~(uint32_t)FLASH_IT;
+ }
+#endif /* STM32F10X_XL */
+}
+
+/**
+ * @brief Checks whether the specified FLASH flag is set or not.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices, this function checks whether the specified
+ * Bank1 or Bank2 flag is set or not.
+ * - For other devices, it checks whether the specified Bank1 flag is
+ * set or not.
+ * @param FLASH_FLAG: specifies the FLASH flag to check.
+ * This parameter can be one of the following values:
+ * @arg FLASH_FLAG_BSY: FLASH Busy flag
+ * @arg FLASH_FLAG_PGERR: FLASH Program error flag
+ * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_EOP: FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPTERR: FLASH Option Byte error flag
+ * @retval The new state of FLASH_FLAG (SET or RESET).
+ */
+FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+
+#ifdef STM32F10X_XL
+ /* Check the parameters */
+ assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ;
+ if(FLASH_FLAG == FLASH_FLAG_OPTERR)
+ {
+ if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+ else
+ {
+ if((FLASH_FLAG & 0x80000000) != 0x0)
+ {
+ if((FLASH->SR2 & FLASH_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+ }
+#else
+ /* Check the parameters */
+ assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ;
+ if(FLASH_FLAG == FLASH_FLAG_OPTERR)
+ {
+ if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the new state of FLASH_FLAG (SET or RESET) */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the FLASH's pending flags.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices, this function clears Bank1 or Bank2’s pending flags
+ * - For other devices, it clears Bank1’s pending flags.
+ * @param FLASH_FLAG: specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_FLAG_PGERR: FLASH Program error flag
+ * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_EOP: FLASH End of Operation flag
+ * @retval None
+ */
+void FLASH_ClearFlag(uint32_t FLASH_FLAG)
+{
+#ifdef STM32F10X_XL
+ /* Check the parameters */
+ assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ;
+
+ if((FLASH_FLAG & 0x80000000) != 0x0)
+ {
+ /* Clear the flags */
+ FLASH->SR2 = FLASH_FLAG;
+ }
+ else
+ {
+ /* Clear the flags */
+ FLASH->SR = FLASH_FLAG;
+ }
+
+#else
+ /* Check the parameters */
+ assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ;
+
+ /* Clear the flags */
+ FLASH->SR = FLASH_FLAG;
+#endif /* STM32F10X_XL */
+}
+
+/**
+ * @brief Returns the FLASH Status.
+ * @note This function can be used for all STM32F10x devices, it is equivalent
+ * to FLASH_GetBank1Status function.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP or FLASH_COMPLETE
+ */
+FLASH_Status FLASH_GetStatus(void)
+{
+ FLASH_Status flashstatus = FLASH_COMPLETE;
+
+ if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY)
+ {
+ flashstatus = FLASH_BUSY;
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG_PGERR) != 0)
+ {
+ flashstatus = FLASH_ERROR_PG;
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG_WRPRTERR) != 0 )
+ {
+ flashstatus = FLASH_ERROR_WRP;
+ }
+ else
+ {
+ flashstatus = FLASH_COMPLETE;
+ }
+ }
+ }
+ /* Return the Flash Status */
+ return flashstatus;
+}
+
+/**
+ * @brief Returns the FLASH Bank1 Status.
+ * @note This function can be used for all STM32F10x devices, it is equivalent
+ * to FLASH_GetStatus function.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP or FLASH_COMPLETE
+ */
+FLASH_Status FLASH_GetBank1Status(void)
+{
+ FLASH_Status flashstatus = FLASH_COMPLETE;
+
+ if((FLASH->SR & FLASH_FLAG_BANK1_BSY) == FLASH_FLAG_BSY)
+ {
+ flashstatus = FLASH_BUSY;
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG_BANK1_PGERR) != 0)
+ {
+ flashstatus = FLASH_ERROR_PG;
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG_BANK1_WRPRTERR) != 0 )
+ {
+ flashstatus = FLASH_ERROR_WRP;
+ }
+ else
+ {
+ flashstatus = FLASH_COMPLETE;
+ }
+ }
+ }
+ /* Return the Flash Status */
+ return flashstatus;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Returns the FLASH Bank2 Status.
+ * @note This function can be used for STM32F10x_XL density devices.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP or FLASH_COMPLETE
+ */
+FLASH_Status FLASH_GetBank2Status(void)
+{
+ FLASH_Status flashstatus = FLASH_COMPLETE;
+
+ if((FLASH->SR2 & (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF))
+ {
+ flashstatus = FLASH_BUSY;
+ }
+ else
+ {
+ if((FLASH->SR2 & (FLASH_FLAG_BANK2_PGERR & 0x7FFFFFFF)) != 0)
+ {
+ flashstatus = FLASH_ERROR_PG;
+ }
+ else
+ {
+ if((FLASH->SR2 & (FLASH_FLAG_BANK2_WRPRTERR & 0x7FFFFFFF)) != 0 )
+ {
+ flashstatus = FLASH_ERROR_WRP;
+ }
+ else
+ {
+ flashstatus = FLASH_COMPLETE;
+ }
+ }
+ }
+ /* Return the Flash Status */
+ return flashstatus;
+}
+#endif /* STM32F10X_XL */
+/**
+ * @brief Waits for a Flash operation to complete or a TIMEOUT to occur.
+ * @note This function can be used for all STM32F10x devices,
+ * it is equivalent to FLASH_WaitForLastBank1Operation.
+ * - For STM32F10X_XL devices this function waits for a Bank1 Flash operation
+ * to complete or a TIMEOUT to occur.
+ * - For all other devices it waits for a Flash operation to complete
+ * or a TIMEOUT to occur.
+ * @param Timeout: FLASH programming Timeout
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check for the Flash Status */
+ status = FLASH_GetBank1Status();
+ /* Wait for a Flash operation to complete or a TIMEOUT to occur */
+ while((status == FLASH_BUSY) && (Timeout != 0x00))
+ {
+ status = FLASH_GetBank1Status();
+ Timeout--;
+ }
+ if(Timeout == 0x00 )
+ {
+ status = FLASH_TIMEOUT;
+ }
+ /* Return the operation status */
+ return status;
+}
+
+/**
+ * @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur.
+ * @note This function can be used for all STM32F10x devices,
+ * it is equivalent to FLASH_WaitForLastOperation.
+ * @param Timeout: FLASH programming Timeout
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check for the Flash Status */
+ status = FLASH_GetBank1Status();
+ /* Wait for a Flash operation to complete or a TIMEOUT to occur */
+ while((status == FLASH_FLAG_BANK1_BSY) && (Timeout != 0x00))
+ {
+ status = FLASH_GetBank1Status();
+ Timeout--;
+ }
+ if(Timeout == 0x00 )
+ {
+ status = FLASH_TIMEOUT;
+ }
+ /* Return the operation status */
+ return status;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur.
+ * @note This function can be used only for STM32F10x_XL density devices.
+ * @param Timeout: FLASH programming Timeout
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check for the Flash Status */
+ status = FLASH_GetBank2Status();
+ /* Wait for a Flash operation to complete or a TIMEOUT to occur */
+ while((status == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) && (Timeout != 0x00))
+ {
+ status = FLASH_GetBank2Status();
+ Timeout--;
+ }
+ if(Timeout == 0x00 )
+ {
+ status = FLASH_TIMEOUT;
+ }
+ /* Return the operation status */
+ return status;
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_fsmc.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_fsmc.c
new file mode 100644
index 00000000..c75137ca
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_fsmc.c
@@ -0,0 +1,866 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_fsmc.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the FSMC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_fsmc.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup FSMC
+ * @brief FSMC driver modules
+ * @{
+ */
+
+/** @defgroup FSMC_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Private_Defines
+ * @{
+ */
+
+/* --------------------- FSMC registers bit mask ---------------------------- */
+
+/* FSMC BCRx Mask */
+#define BCR_MBKEN_Set ((uint32_t)0x00000001)
+#define BCR_MBKEN_Reset ((uint32_t)0x000FFFFE)
+#define BCR_FACCEN_Set ((uint32_t)0x00000040)
+
+/* FSMC PCRx Mask */
+#define PCR_PBKEN_Set ((uint32_t)0x00000004)
+#define PCR_PBKEN_Reset ((uint32_t)0x000FFFFB)
+#define PCR_ECCEN_Set ((uint32_t)0x00000040)
+#define PCR_ECCEN_Reset ((uint32_t)0x000FFFBF)
+#define PCR_MemoryType_NAND ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the FSMC NOR/SRAM Banks registers to their default
+ * reset values.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1
+ * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2
+ * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3
+ * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4
+ * @retval None
+ */
+void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank)
+{
+ /* Check the parameter */
+ assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank));
+
+ /* FSMC_Bank1_NORSRAM1 */
+ if(FSMC_Bank == FSMC_Bank1_NORSRAM1)
+ {
+ FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030DB;
+ }
+ /* FSMC_Bank1_NORSRAM2, FSMC_Bank1_NORSRAM3 or FSMC_Bank1_NORSRAM4 */
+ else
+ {
+ FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030D2;
+ }
+ FSMC_Bank1->BTCR[FSMC_Bank + 1] = 0x0FFFFFFF;
+ FSMC_Bank1E->BWTR[FSMC_Bank] = 0x0FFFFFFF;
+}
+
+/**
+ * @brief Deinitializes the FSMC NAND Banks registers to their default reset values.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @retval None
+ */
+void FSMC_NANDDeInit(uint32_t FSMC_Bank)
+{
+ /* Check the parameter */
+ assert_param(IS_FSMC_NAND_BANK(FSMC_Bank));
+
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ /* Set the FSMC_Bank2 registers to their reset values */
+ FSMC_Bank2->PCR2 = 0x00000018;
+ FSMC_Bank2->SR2 = 0x00000040;
+ FSMC_Bank2->PMEM2 = 0xFCFCFCFC;
+ FSMC_Bank2->PATT2 = 0xFCFCFCFC;
+ }
+ /* FSMC_Bank3_NAND */
+ else
+ {
+ /* Set the FSMC_Bank3 registers to their reset values */
+ FSMC_Bank3->PCR3 = 0x00000018;
+ FSMC_Bank3->SR3 = 0x00000040;
+ FSMC_Bank3->PMEM3 = 0xFCFCFCFC;
+ FSMC_Bank3->PATT3 = 0xFCFCFCFC;
+ }
+}
+
+/**
+ * @brief Deinitializes the FSMC PCCARD Bank registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void FSMC_PCCARDDeInit(void)
+{
+ /* Set the FSMC_Bank4 registers to their reset values */
+ FSMC_Bank4->PCR4 = 0x00000018;
+ FSMC_Bank4->SR4 = 0x00000000;
+ FSMC_Bank4->PMEM4 = 0xFCFCFCFC;
+ FSMC_Bank4->PATT4 = 0xFCFCFCFC;
+ FSMC_Bank4->PIO4 = 0xFCFCFCFC;
+}
+
+/**
+ * @brief Initializes the FSMC NOR/SRAM Banks according to the specified
+ * parameters in the FSMC_NORSRAMInitStruct.
+ * @param FSMC_NORSRAMInitStruct : pointer to a FSMC_NORSRAMInitTypeDef
+ * structure that contains the configuration information for
+ * the FSMC NOR/SRAM specified Banks.
+ * @retval None
+ */
+void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_BANK(FSMC_NORSRAMInitStruct->FSMC_Bank));
+ assert_param(IS_FSMC_MUX(FSMC_NORSRAMInitStruct->FSMC_DataAddressMux));
+ assert_param(IS_FSMC_MEMORY(FSMC_NORSRAMInitStruct->FSMC_MemoryType));
+ assert_param(IS_FSMC_MEMORY_WIDTH(FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth));
+ assert_param(IS_FSMC_BURSTMODE(FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode));
+ assert_param(IS_FSMC_ASYNWAIT(FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait));
+ assert_param(IS_FSMC_WAIT_POLARITY(FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity));
+ assert_param(IS_FSMC_WRAP_MODE(FSMC_NORSRAMInitStruct->FSMC_WrapMode));
+ assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive));
+ assert_param(IS_FSMC_WRITE_OPERATION(FSMC_NORSRAMInitStruct->FSMC_WriteOperation));
+ assert_param(IS_FSMC_WAITE_SIGNAL(FSMC_NORSRAMInitStruct->FSMC_WaitSignal));
+ assert_param(IS_FSMC_EXTENDED_MODE(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode));
+ assert_param(IS_FSMC_WRITE_BURST(FSMC_NORSRAMInitStruct->FSMC_WriteBurst));
+ assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime));
+ assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime));
+ assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime));
+ assert_param(IS_FSMC_TURNAROUND_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration));
+ assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision));
+ assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency));
+ assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode));
+
+ /* Bank1 NOR/SRAM control register configuration */
+ FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] =
+ (uint32_t)FSMC_NORSRAMInitStruct->FSMC_DataAddressMux |
+ FSMC_NORSRAMInitStruct->FSMC_MemoryType |
+ FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth |
+ FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode |
+ FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait |
+ FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity |
+ FSMC_NORSRAMInitStruct->FSMC_WrapMode |
+ FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive |
+ FSMC_NORSRAMInitStruct->FSMC_WriteOperation |
+ FSMC_NORSRAMInitStruct->FSMC_WaitSignal |
+ FSMC_NORSRAMInitStruct->FSMC_ExtendedMode |
+ FSMC_NORSRAMInitStruct->FSMC_WriteBurst;
+
+ if(FSMC_NORSRAMInitStruct->FSMC_MemoryType == FSMC_MemoryType_NOR)
+ {
+ FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] |= (uint32_t)BCR_FACCEN_Set;
+ }
+
+ /* Bank1 NOR/SRAM timing register configuration */
+ FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank+1] =
+ (uint32_t)FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime |
+ (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime << 4) |
+ (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime << 8) |
+ (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration << 16) |
+ (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision << 20) |
+ (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency << 24) |
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode;
+
+
+ /* Bank1 NOR/SRAM timing register for write configuration, if extended mode is used */
+ if(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode == FSMC_ExtendedMode_Enable)
+ {
+ assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime));
+ assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime));
+ assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime));
+ assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision));
+ assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency));
+ assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode));
+ FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] =
+ (uint32_t)FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime |
+ (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime << 4 )|
+ (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime << 8) |
+ (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision << 20) |
+ (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency << 24) |
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode;
+ }
+ else
+ {
+ FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = 0x0FFFFFFF;
+ }
+}
+
+/**
+ * @brief Initializes the FSMC NAND Banks according to the specified
+ * parameters in the FSMC_NANDInitStruct.
+ * @param FSMC_NANDInitStruct : pointer to a FSMC_NANDInitTypeDef
+ * structure that contains the configuration information for the FSMC
+ * NAND specified Banks.
+ * @retval None
+ */
+void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct)
+{
+ uint32_t tmppcr = 0x00000000, tmppmem = 0x00000000, tmppatt = 0x00000000;
+
+ /* Check the parameters */
+ assert_param( IS_FSMC_NAND_BANK(FSMC_NANDInitStruct->FSMC_Bank));
+ assert_param( IS_FSMC_WAIT_FEATURE(FSMC_NANDInitStruct->FSMC_Waitfeature));
+ assert_param( IS_FSMC_MEMORY_WIDTH(FSMC_NANDInitStruct->FSMC_MemoryDataWidth));
+ assert_param( IS_FSMC_ECC_STATE(FSMC_NANDInitStruct->FSMC_ECC));
+ assert_param( IS_FSMC_ECCPAGE_SIZE(FSMC_NANDInitStruct->FSMC_ECCPageSize));
+ assert_param( IS_FSMC_TCLR_TIME(FSMC_NANDInitStruct->FSMC_TCLRSetupTime));
+ assert_param( IS_FSMC_TAR_TIME(FSMC_NANDInitStruct->FSMC_TARSetupTime));
+ assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime));
+ assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime));
+
+ /* Set the tmppcr value according to FSMC_NANDInitStruct parameters */
+ tmppcr = (uint32_t)FSMC_NANDInitStruct->FSMC_Waitfeature |
+ PCR_MemoryType_NAND |
+ FSMC_NANDInitStruct->FSMC_MemoryDataWidth |
+ FSMC_NANDInitStruct->FSMC_ECC |
+ FSMC_NANDInitStruct->FSMC_ECCPageSize |
+ (FSMC_NANDInitStruct->FSMC_TCLRSetupTime << 9 )|
+ (FSMC_NANDInitStruct->FSMC_TARSetupTime << 13);
+
+ /* Set tmppmem value according to FSMC_CommonSpaceTimingStructure parameters */
+ tmppmem = (uint32_t)FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime |
+ (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+ (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+ (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24);
+
+ /* Set tmppatt value according to FSMC_AttributeSpaceTimingStructure parameters */
+ tmppatt = (uint32_t)FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime |
+ (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+ (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+ (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24);
+
+ if(FSMC_NANDInitStruct->FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ /* FSMC_Bank2_NAND registers configuration */
+ FSMC_Bank2->PCR2 = tmppcr;
+ FSMC_Bank2->PMEM2 = tmppmem;
+ FSMC_Bank2->PATT2 = tmppatt;
+ }
+ else
+ {
+ /* FSMC_Bank3_NAND registers configuration */
+ FSMC_Bank3->PCR3 = tmppcr;
+ FSMC_Bank3->PMEM3 = tmppmem;
+ FSMC_Bank3->PATT3 = tmppatt;
+ }
+}
+
+/**
+ * @brief Initializes the FSMC PCCARD Bank according to the specified
+ * parameters in the FSMC_PCCARDInitStruct.
+ * @param FSMC_PCCARDInitStruct : pointer to a FSMC_PCCARDInitTypeDef
+ * structure that contains the configuration information for the FSMC
+ * PCCARD Bank.
+ * @retval None
+ */
+void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_WAIT_FEATURE(FSMC_PCCARDInitStruct->FSMC_Waitfeature));
+ assert_param(IS_FSMC_TCLR_TIME(FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime));
+ assert_param(IS_FSMC_TAR_TIME(FSMC_PCCARDInitStruct->FSMC_TARSetupTime));
+
+ assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime));
+
+ assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime));
+ assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime));
+
+ /* Set the PCR4 register value according to FSMC_PCCARDInitStruct parameters */
+ FSMC_Bank4->PCR4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_Waitfeature |
+ FSMC_MemoryDataWidth_16b |
+ (FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime << 9) |
+ (FSMC_PCCARDInitStruct->FSMC_TARSetupTime << 13);
+
+ /* Set PMEM4 register value according to FSMC_CommonSpaceTimingStructure parameters */
+ FSMC_Bank4->PMEM4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime |
+ (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+ (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+ (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24);
+
+ /* Set PATT4 register value according to FSMC_AttributeSpaceTimingStructure parameters */
+ FSMC_Bank4->PATT4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime |
+ (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+ (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+ (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24);
+
+ /* Set PIO4 register value according to FSMC_IOSpaceTimingStructure parameters */
+ FSMC_Bank4->PIO4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime |
+ (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+ (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+ (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime << 24);
+}
+
+/**
+ * @brief Fills each FSMC_NORSRAMInitStruct member with its default value.
+ * @param FSMC_NORSRAMInitStruct: pointer to a FSMC_NORSRAMInitTypeDef
+ * structure which will be initialized.
+ * @retval None
+ */
+void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct)
+{
+ /* Reset NOR/SRAM Init structure parameters values */
+ FSMC_NORSRAMInitStruct->FSMC_Bank = FSMC_Bank1_NORSRAM1;
+ FSMC_NORSRAMInitStruct->FSMC_DataAddressMux = FSMC_DataAddressMux_Enable;
+ FSMC_NORSRAMInitStruct->FSMC_MemoryType = FSMC_MemoryType_SRAM;
+ FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b;
+ FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
+ FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
+ FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
+ FSMC_NORSRAMInitStruct->FSMC_WrapMode = FSMC_WrapMode_Disable;
+ FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
+ FSMC_NORSRAMInitStruct->FSMC_WriteOperation = FSMC_WriteOperation_Enable;
+ FSMC_NORSRAMInitStruct->FSMC_WaitSignal = FSMC_WaitSignal_Enable;
+ FSMC_NORSRAMInitStruct->FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
+ FSMC_NORSRAMInitStruct->FSMC_WriteBurst = FSMC_WriteBurst_Disable;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime = 0xFF;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime = 0xFF;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A;
+}
+
+/**
+ * @brief Fills each FSMC_NANDInitStruct member with its default value.
+ * @param FSMC_NANDInitStruct: pointer to a FSMC_NANDInitTypeDef
+ * structure which will be initialized.
+ * @retval None
+ */
+void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct)
+{
+ /* Reset NAND Init structure parameters values */
+ FSMC_NANDInitStruct->FSMC_Bank = FSMC_Bank2_NAND;
+ FSMC_NANDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable;
+ FSMC_NANDInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b;
+ FSMC_NANDInitStruct->FSMC_ECC = FSMC_ECC_Disable;
+ FSMC_NANDInitStruct->FSMC_ECCPageSize = FSMC_ECCPageSize_256Bytes;
+ FSMC_NANDInitStruct->FSMC_TCLRSetupTime = 0x0;
+ FSMC_NANDInitStruct->FSMC_TARSetupTime = 0x0;
+ FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
+}
+
+/**
+ * @brief Fills each FSMC_PCCARDInitStruct member with its default value.
+ * @param FSMC_PCCARDInitStruct: pointer to a FSMC_PCCARDInitTypeDef
+ * structure which will be initialized.
+ * @retval None
+ */
+void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct)
+{
+ /* Reset PCCARD Init structure parameters values */
+ FSMC_PCCARDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable;
+ FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime = 0x0;
+ FSMC_PCCARDInitStruct->FSMC_TARSetupTime = 0x0;
+ FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
+}
+
+/**
+ * @brief Enables or disables the specified NOR/SRAM Memory Bank.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1
+ * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2
+ * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3
+ * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4
+ * @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState)
+{
+ assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected NOR/SRAM Bank by setting the PBKEN bit in the BCRx register */
+ FSMC_Bank1->BTCR[FSMC_Bank] |= BCR_MBKEN_Set;
+ }
+ else
+ {
+ /* Disable the selected NOR/SRAM Bank by clearing the PBKEN bit in the BCRx register */
+ FSMC_Bank1->BTCR[FSMC_Bank] &= BCR_MBKEN_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified NAND Memory Bank.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState)
+{
+ assert_param(IS_FSMC_NAND_BANK(FSMC_Bank));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected NAND Bank by setting the PBKEN bit in the PCRx register */
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->PCR2 |= PCR_PBKEN_Set;
+ }
+ else
+ {
+ FSMC_Bank3->PCR3 |= PCR_PBKEN_Set;
+ }
+ }
+ else
+ {
+ /* Disable the selected NAND Bank by clearing the PBKEN bit in the PCRx register */
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->PCR2 &= PCR_PBKEN_Reset;
+ }
+ else
+ {
+ FSMC_Bank3->PCR3 &= PCR_PBKEN_Reset;
+ }
+ }
+}
+
+/**
+ * @brief Enables or disables the PCCARD Memory Bank.
+ * @param NewState: new state of the PCCARD Memory Bank.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void FSMC_PCCARDCmd(FunctionalState NewState)
+{
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the PCCARD Bank by setting the PBKEN bit in the PCR4 register */
+ FSMC_Bank4->PCR4 |= PCR_PBKEN_Set;
+ }
+ else
+ {
+ /* Disable the PCCARD Bank by clearing the PBKEN bit in the PCR4 register */
+ FSMC_Bank4->PCR4 &= PCR_PBKEN_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the FSMC NAND ECC feature.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @param NewState: new state of the FSMC NAND ECC feature.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState)
+{
+ assert_param(IS_FSMC_NAND_BANK(FSMC_Bank));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected NAND Bank ECC function by setting the ECCEN bit in the PCRx register */
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->PCR2 |= PCR_ECCEN_Set;
+ }
+ else
+ {
+ FSMC_Bank3->PCR3 |= PCR_ECCEN_Set;
+ }
+ }
+ else
+ {
+ /* Disable the selected NAND Bank ECC function by clearing the ECCEN bit in the PCRx register */
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->PCR2 &= PCR_ECCEN_Reset;
+ }
+ else
+ {
+ FSMC_Bank3->PCR3 &= PCR_ECCEN_Reset;
+ }
+ }
+}
+
+/**
+ * @brief Returns the error correction code register value.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @retval The Error Correction Code (ECC) value.
+ */
+uint32_t FSMC_GetECC(uint32_t FSMC_Bank)
+{
+ uint32_t eccval = 0x00000000;
+
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ /* Get the ECCR2 register value */
+ eccval = FSMC_Bank2->ECCR2;
+ }
+ else
+ {
+ /* Get the ECCR3 register value */
+ eccval = FSMC_Bank3->ECCR3;
+ }
+ /* Return the error correction code value */
+ return(eccval);
+}
+
+/**
+ * @brief Enables or disables the specified FSMC interrupts.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+ * @param FSMC_IT: specifies the FSMC interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt.
+ * @arg FSMC_IT_Level: Level edge detection interrupt.
+ * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt.
+ * @param NewState: new state of the specified FSMC interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState)
+{
+ assert_param(IS_FSMC_IT_BANK(FSMC_Bank));
+ assert_param(IS_FSMC_IT(FSMC_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected FSMC_Bank2 interrupts */
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->SR2 |= FSMC_IT;
+ }
+ /* Enable the selected FSMC_Bank3 interrupts */
+ else if (FSMC_Bank == FSMC_Bank3_NAND)
+ {
+ FSMC_Bank3->SR3 |= FSMC_IT;
+ }
+ /* Enable the selected FSMC_Bank4 interrupts */
+ else
+ {
+ FSMC_Bank4->SR4 |= FSMC_IT;
+ }
+ }
+ else
+ {
+ /* Disable the selected FSMC_Bank2 interrupts */
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+
+ FSMC_Bank2->SR2 &= (uint32_t)~FSMC_IT;
+ }
+ /* Disable the selected FSMC_Bank3 interrupts */
+ else if (FSMC_Bank == FSMC_Bank3_NAND)
+ {
+ FSMC_Bank3->SR3 &= (uint32_t)~FSMC_IT;
+ }
+ /* Disable the selected FSMC_Bank4 interrupts */
+ else
+ {
+ FSMC_Bank4->SR4 &= (uint32_t)~FSMC_IT;
+ }
+ }
+}
+
+/**
+ * @brief Checks whether the specified FSMC flag is set or not.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+ * @param FSMC_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag.
+ * @arg FSMC_FLAG_Level: Level detection Flag.
+ * @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag.
+ * @arg FSMC_FLAG_FEMPT: Fifo empty Flag.
+ * @retval The new state of FSMC_FLAG (SET or RESET).
+ */
+FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ uint32_t tmpsr = 0x00000000;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank));
+ assert_param(IS_FSMC_GET_FLAG(FSMC_FLAG));
+
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ tmpsr = FSMC_Bank2->SR2;
+ }
+ else if(FSMC_Bank == FSMC_Bank3_NAND)
+ {
+ tmpsr = FSMC_Bank3->SR3;
+ }
+ /* FSMC_Bank4_PCCARD*/
+ else
+ {
+ tmpsr = FSMC_Bank4->SR4;
+ }
+
+ /* Get the flag status */
+ if ((tmpsr & FSMC_FLAG) != (uint16_t)RESET )
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ /* Return the flag status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the FSMC's pending flags.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+ * @param FSMC_FLAG: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag.
+ * @arg FSMC_FLAG_Level: Level detection Flag.
+ * @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag.
+ * @retval None
+ */
+void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank));
+ assert_param(IS_FSMC_CLEAR_FLAG(FSMC_FLAG)) ;
+
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->SR2 &= ~FSMC_FLAG;
+ }
+ else if(FSMC_Bank == FSMC_Bank3_NAND)
+ {
+ FSMC_Bank3->SR3 &= ~FSMC_FLAG;
+ }
+ /* FSMC_Bank4_PCCARD*/
+ else
+ {
+ FSMC_Bank4->SR4 &= ~FSMC_FLAG;
+ }
+}
+
+/**
+ * @brief Checks whether the specified FSMC interrupt has occurred or not.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+ * @param FSMC_IT: specifies the FSMC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt.
+ * @arg FSMC_IT_Level: Level edge detection interrupt.
+ * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt.
+ * @retval The new state of FSMC_IT (SET or RESET).
+ */
+ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t tmpsr = 0x0, itstatus = 0x0, itenable = 0x0;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_IT_BANK(FSMC_Bank));
+ assert_param(IS_FSMC_GET_IT(FSMC_IT));
+
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ tmpsr = FSMC_Bank2->SR2;
+ }
+ else if(FSMC_Bank == FSMC_Bank3_NAND)
+ {
+ tmpsr = FSMC_Bank3->SR3;
+ }
+ /* FSMC_Bank4_PCCARD*/
+ else
+ {
+ tmpsr = FSMC_Bank4->SR4;
+ }
+
+ itstatus = tmpsr & FSMC_IT;
+
+ itenable = tmpsr & (FSMC_IT >> 3);
+ if ((itstatus != (uint32_t)RESET) && (itenable != (uint32_t)RESET))
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the FSMC's interrupt pending bits.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+ * @param FSMC_IT: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt.
+ * @arg FSMC_IT_Level: Level edge detection interrupt.
+ * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt.
+ * @retval None
+ */
+void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_IT_BANK(FSMC_Bank));
+ assert_param(IS_FSMC_IT(FSMC_IT));
+
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->SR2 &= ~(FSMC_IT >> 3);
+ }
+ else if(FSMC_Bank == FSMC_Bank3_NAND)
+ {
+ FSMC_Bank3->SR3 &= ~(FSMC_IT >> 3);
+ }
+ /* FSMC_Bank4_PCCARD*/
+ else
+ {
+ FSMC_Bank4->SR4 &= ~(FSMC_IT >> 3);
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_gpio.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_gpio.c
new file mode 100644
index 00000000..93dbcd7c
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_gpio.c
@@ -0,0 +1,650 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_gpio.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the GPIO firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_gpio.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup GPIO
+ * @brief GPIO driver modules
+ * @{
+ */
+
+/** @defgroup GPIO_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Private_Defines
+ * @{
+ */
+
+/* ------------ RCC registers bit address in the alias region ----------------*/
+#define AFIO_OFFSET (AFIO_BASE - PERIPH_BASE)
+
+/* --- EVENTCR Register -----*/
+
+/* Alias word address of EVOE bit */
+#define EVCR_OFFSET (AFIO_OFFSET + 0x00)
+#define EVOE_BitNumber ((uint8_t)0x07)
+#define EVCR_EVOE_BB (PERIPH_BB_BASE + (EVCR_OFFSET * 32) + (EVOE_BitNumber * 4))
+
+
+/* --- MAPR Register ---*/
+/* Alias word address of MII_RMII_SEL bit */
+#define MAPR_OFFSET (AFIO_OFFSET + 0x04)
+#define MII_RMII_SEL_BitNumber ((u8)0x17)
+#define MAPR_MII_RMII_SEL_BB (PERIPH_BB_BASE + (MAPR_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4))
+
+
+#define EVCR_PORTPINCONFIG_MASK ((uint16_t)0xFF80)
+#define LSB_MASK ((uint16_t)0xFFFF)
+#define DBGAFR_POSITION_MASK ((uint32_t)0x000F0000)
+#define DBGAFR_SWJCFG_MASK ((uint32_t)0xF0FFFFFF)
+#define DBGAFR_LOCATION_MASK ((uint32_t)0x00200000)
+#define DBGAFR_NUMBITS_MASK ((uint32_t)0x00100000)
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the GPIOx peripheral registers to their default reset values.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @retval None
+ */
+void GPIO_DeInit(GPIO_TypeDef* GPIOx)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+
+ if (GPIOx == GPIOA)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, DISABLE);
+ }
+ else if (GPIOx == GPIOB)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, DISABLE);
+ }
+ else if (GPIOx == GPIOC)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, DISABLE);
+ }
+ else if (GPIOx == GPIOD)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, DISABLE);
+ }
+ else if (GPIOx == GPIOE)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, DISABLE);
+ }
+ else if (GPIOx == GPIOF)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, DISABLE);
+ }
+ else
+ {
+ if (GPIOx == GPIOG)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, DISABLE);
+ }
+ }
+}
+
+/**
+ * @brief Deinitializes the Alternate Functions (remap, event control
+ * and EXTI configuration) registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void GPIO_AFIODeInit(void)
+{
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, DISABLE);
+}
+
+/**
+ * @brief Initializes the GPIOx peripheral according to the specified
+ * parameters in the GPIO_InitStruct.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that
+ * contains the configuration information for the specified GPIO peripheral.
+ * @retval None
+ */
+void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct)
+{
+ uint32_t currentmode = 0x00, currentpin = 0x00, pinpos = 0x00, pos = 0x00;
+ uint32_t tmpreg = 0x00, pinmask = 0x00;
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode));
+ assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin));
+
+/*---------------------------- GPIO Mode Configuration -----------------------*/
+ currentmode = ((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x0F);
+ if ((((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x10)) != 0x00)
+ {
+ /* Check the parameters */
+ assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed));
+ /* Output mode */
+ currentmode |= (uint32_t)GPIO_InitStruct->GPIO_Speed;
+ }
+/*---------------------------- GPIO CRL Configuration ------------------------*/
+ /* Configure the eight low port pins */
+ if (((uint32_t)GPIO_InitStruct->GPIO_Pin & ((uint32_t)0x00FF)) != 0x00)
+ {
+ tmpreg = GPIOx->CRL;
+ for (pinpos = 0x00; pinpos < 0x08; pinpos++)
+ {
+ pos = ((uint32_t)0x01) << pinpos;
+ /* Get the port pins position */
+ currentpin = (GPIO_InitStruct->GPIO_Pin) & pos;
+ if (currentpin == pos)
+ {
+ pos = pinpos << 2;
+ /* Clear the corresponding low control register bits */
+ pinmask = ((uint32_t)0x0F) << pos;
+ tmpreg &= ~pinmask;
+ /* Write the mode configuration in the corresponding bits */
+ tmpreg |= (currentmode << pos);
+ /* Reset the corresponding ODR bit */
+ if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD)
+ {
+ GPIOx->BRR = (((uint32_t)0x01) << pinpos);
+ }
+ else
+ {
+ /* Set the corresponding ODR bit */
+ if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU)
+ {
+ GPIOx->BSRR = (((uint32_t)0x01) << pinpos);
+ }
+ }
+ }
+ }
+ GPIOx->CRL = tmpreg;
+ }
+/*---------------------------- GPIO CRH Configuration ------------------------*/
+ /* Configure the eight high port pins */
+ if (GPIO_InitStruct->GPIO_Pin > 0x00FF)
+ {
+ tmpreg = GPIOx->CRH;
+ for (pinpos = 0x00; pinpos < 0x08; pinpos++)
+ {
+ pos = (((uint32_t)0x01) << (pinpos + 0x08));
+ /* Get the port pins position */
+ currentpin = ((GPIO_InitStruct->GPIO_Pin) & pos);
+ if (currentpin == pos)
+ {
+ pos = pinpos << 2;
+ /* Clear the corresponding high control register bits */
+ pinmask = ((uint32_t)0x0F) << pos;
+ tmpreg &= ~pinmask;
+ /* Write the mode configuration in the corresponding bits */
+ tmpreg |= (currentmode << pos);
+ /* Reset the corresponding ODR bit */
+ if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD)
+ {
+ GPIOx->BRR = (((uint32_t)0x01) << (pinpos + 0x08));
+ }
+ /* Set the corresponding ODR bit */
+ if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU)
+ {
+ GPIOx->BSRR = (((uint32_t)0x01) << (pinpos + 0x08));
+ }
+ }
+ }
+ GPIOx->CRH = tmpreg;
+ }
+}
+
+/**
+ * @brief Fills each GPIO_InitStruct member with its default value.
+ * @param GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct)
+{
+ /* Reset GPIO init structure parameters values */
+ GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All;
+ GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz;
+ GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN_FLOATING;
+}
+
+/**
+ * @brief Reads the specified input port pin.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bit to read.
+ * This parameter can be GPIO_Pin_x where x can be (0..15).
+ * @retval The input port pin value.
+ */
+uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ uint8_t bitstatus = 0x00;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
+
+ if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET)
+ {
+ bitstatus = (uint8_t)Bit_SET;
+ }
+ else
+ {
+ bitstatus = (uint8_t)Bit_RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Reads the specified GPIO input data port.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @retval GPIO input data port value.
+ */
+uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+
+ return ((uint16_t)GPIOx->IDR);
+}
+
+/**
+ * @brief Reads the specified output data port bit.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bit to read.
+ * This parameter can be GPIO_Pin_x where x can be (0..15).
+ * @retval The output port pin value.
+ */
+uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ uint8_t bitstatus = 0x00;
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
+
+ if ((GPIOx->ODR & GPIO_Pin) != (uint32_t)Bit_RESET)
+ {
+ bitstatus = (uint8_t)Bit_SET;
+ }
+ else
+ {
+ bitstatus = (uint8_t)Bit_RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Reads the specified GPIO output data port.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @retval GPIO output data port value.
+ */
+uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+
+ return ((uint16_t)GPIOx->ODR);
+}
+
+/**
+ * @brief Sets the selected data port bits.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bits to be written.
+ * This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+ * @retval None
+ */
+void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ GPIOx->BSRR = GPIO_Pin;
+}
+
+/**
+ * @brief Clears the selected data port bits.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bits to be written.
+ * This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+ * @retval None
+ */
+void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ GPIOx->BRR = GPIO_Pin;
+}
+
+/**
+ * @brief Sets or clears the selected data port bit.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bit to be written.
+ * This parameter can be one of GPIO_Pin_x where x can be (0..15).
+ * @param BitVal: specifies the value to be written to the selected bit.
+ * This parameter can be one of the BitAction enum values:
+ * @arg Bit_RESET: to clear the port pin
+ * @arg Bit_SET: to set the port pin
+ * @retval None
+ */
+void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
+ assert_param(IS_GPIO_BIT_ACTION(BitVal));
+
+ if (BitVal != Bit_RESET)
+ {
+ GPIOx->BSRR = GPIO_Pin;
+ }
+ else
+ {
+ GPIOx->BRR = GPIO_Pin;
+ }
+}
+
+/**
+ * @brief Writes data to the specified GPIO data port.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param PortVal: specifies the value to be written to the port output data register.
+ * @retval None
+ */
+void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+
+ GPIOx->ODR = PortVal;
+}
+
+/**
+ * @brief Locks GPIO Pins configuration registers.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bit to be written.
+ * This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+ * @retval None
+ */
+void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ uint32_t tmp = 0x00010000;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ tmp |= GPIO_Pin;
+ /* Set LCKK bit */
+ GPIOx->LCKR = tmp;
+ /* Reset LCKK bit */
+ GPIOx->LCKR = GPIO_Pin;
+ /* Set LCKK bit */
+ GPIOx->LCKR = tmp;
+ /* Read LCKK bit*/
+ tmp = GPIOx->LCKR;
+ /* Read LCKK bit*/
+ tmp = GPIOx->LCKR;
+}
+
+/**
+ * @brief Selects the GPIO pin used as Event output.
+ * @param GPIO_PortSource: selects the GPIO port to be used as source
+ * for Event output.
+ * This parameter can be GPIO_PortSourceGPIOx where x can be (A..E).
+ * @param GPIO_PinSource: specifies the pin for the Event output.
+ * This parameter can be GPIO_PinSourcex where x can be (0..15).
+ * @retval None
+ */
+void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource)
+{
+ uint32_t tmpreg = 0x00;
+ /* Check the parameters */
+ assert_param(IS_GPIO_EVENTOUT_PORT_SOURCE(GPIO_PortSource));
+ assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource));
+
+ tmpreg = AFIO->EVCR;
+ /* Clear the PORT[6:4] and PIN[3:0] bits */
+ tmpreg &= EVCR_PORTPINCONFIG_MASK;
+ tmpreg |= (uint32_t)GPIO_PortSource << 0x04;
+ tmpreg |= GPIO_PinSource;
+ AFIO->EVCR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the Event Output.
+ * @param NewState: new state of the Event output.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void GPIO_EventOutputCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) EVCR_EVOE_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Changes the mapping of the specified pin.
+ * @param GPIO_Remap: selects the pin to remap.
+ * This parameter can be one of the following values:
+ * @arg GPIO_Remap_SPI1 : SPI1 Alternate Function mapping
+ * @arg GPIO_Remap_I2C1 : I2C1 Alternate Function mapping
+ * @arg GPIO_Remap_USART1 : USART1 Alternate Function mapping
+ * @arg GPIO_Remap_USART2 : USART2 Alternate Function mapping
+ * @arg GPIO_PartialRemap_USART3 : USART3 Partial Alternate Function mapping
+ * @arg GPIO_FullRemap_USART3 : USART3 Full Alternate Function mapping
+ * @arg GPIO_PartialRemap_TIM1 : TIM1 Partial Alternate Function mapping
+ * @arg GPIO_FullRemap_TIM1 : TIM1 Full Alternate Function mapping
+ * @arg GPIO_PartialRemap1_TIM2 : TIM2 Partial1 Alternate Function mapping
+ * @arg GPIO_PartialRemap2_TIM2 : TIM2 Partial2 Alternate Function mapping
+ * @arg GPIO_FullRemap_TIM2 : TIM2 Full Alternate Function mapping
+ * @arg GPIO_PartialRemap_TIM3 : TIM3 Partial Alternate Function mapping
+ * @arg GPIO_FullRemap_TIM3 : TIM3 Full Alternate Function mapping
+ * @arg GPIO_Remap_TIM4 : TIM4 Alternate Function mapping
+ * @arg GPIO_Remap1_CAN1 : CAN1 Alternate Function mapping
+ * @arg GPIO_Remap2_CAN1 : CAN1 Alternate Function mapping
+ * @arg GPIO_Remap_PD01 : PD01 Alternate Function mapping
+ * @arg GPIO_Remap_TIM5CH4_LSI : LSI connected to TIM5 Channel4 input capture for calibration
+ * @arg GPIO_Remap_ADC1_ETRGINJ : ADC1 External Trigger Injected Conversion remapping
+ * @arg GPIO_Remap_ADC1_ETRGREG : ADC1 External Trigger Regular Conversion remapping
+ * @arg GPIO_Remap_ADC2_ETRGINJ : ADC2 External Trigger Injected Conversion remapping
+ * @arg GPIO_Remap_ADC2_ETRGREG : ADC2 External Trigger Regular Conversion remapping
+ * @arg GPIO_Remap_ETH : Ethernet remapping (only for Connectivity line devices)
+ * @arg GPIO_Remap_CAN2 : CAN2 remapping (only for Connectivity line devices)
+ * @arg GPIO_Remap_SWJ_NoJTRST : Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST
+ * @arg GPIO_Remap_SWJ_JTAGDisable : JTAG-DP Disabled and SW-DP Enabled
+ * @arg GPIO_Remap_SWJ_Disable : Full SWJ Disabled (JTAG-DP + SW-DP)
+ * @arg GPIO_Remap_SPI3 : SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices)
+ * When the SPI3/I2S3 is remapped using this function, the SWJ is configured
+ * to Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST.
+ * @arg GPIO_Remap_TIM2ITR1_PTP_SOF : Ethernet PTP output or USB OTG SOF (Start of Frame) connected
+ * to TIM2 Internal Trigger 1 for calibration (only for Connectivity line devices)
+ * If the GPIO_Remap_TIM2ITR1_PTP_SOF is enabled the TIM2 ITR1 is connected to
+ * Ethernet PTP output. When Reset TIM2 ITR1 is connected to USB OTG SOF output.
+ * @arg GPIO_Remap_PTP_PPS : Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices)
+ * @arg GPIO_Remap_TIM15 : TIM15 Alternate Function mapping (only for Value line devices)
+ * @arg GPIO_Remap_TIM16 : TIM16 Alternate Function mapping (only for Value line devices)
+ * @arg GPIO_Remap_TIM17 : TIM17 Alternate Function mapping (only for Value line devices)
+ * @arg GPIO_Remap_CEC : CEC Alternate Function mapping (only for Value line devices)
+ * @arg GPIO_Remap_TIM1_DMA : TIM1 DMA requests mapping (only for Value line devices)
+ * @arg GPIO_Remap_TIM9 : TIM9 Alternate Function mapping (only for XL-density devices)
+ * @arg GPIO_Remap_TIM10 : TIM10 Alternate Function mapping (only for XL-density devices)
+ * @arg GPIO_Remap_TIM11 : TIM11 Alternate Function mapping (only for XL-density devices)
+ * @arg GPIO_Remap_TIM13 : TIM13 Alternate Function mapping (only for High density Value line and XL-density devices)
+ * @arg GPIO_Remap_TIM14 : TIM14 Alternate Function mapping (only for High density Value line and XL-density devices)
+ * @arg GPIO_Remap_FSMC_NADV : FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices)
+ * @arg GPIO_Remap_TIM67_DAC_DMA : TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices)
+ * @arg GPIO_Remap_TIM12 : TIM12 Alternate Function mapping (only for High density Value line devices)
+ * @arg GPIO_Remap_MISC : Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping,
+ * only for High density Value line devices)
+ * @param NewState: new state of the port pin remapping.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState)
+{
+ uint32_t tmp = 0x00, tmp1 = 0x00, tmpreg = 0x00, tmpmask = 0x00;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_REMAP(GPIO_Remap));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if((GPIO_Remap & 0x80000000) == 0x80000000)
+ {
+ tmpreg = AFIO->MAPR2;
+ }
+ else
+ {
+ tmpreg = AFIO->MAPR;
+ }
+
+ tmpmask = (GPIO_Remap & DBGAFR_POSITION_MASK) >> 0x10;
+ tmp = GPIO_Remap & LSB_MASK;
+
+ if ((GPIO_Remap & (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) == (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK))
+ {
+ tmpreg &= DBGAFR_SWJCFG_MASK;
+ AFIO->MAPR &= DBGAFR_SWJCFG_MASK;
+ }
+ else if ((GPIO_Remap & DBGAFR_NUMBITS_MASK) == DBGAFR_NUMBITS_MASK)
+ {
+ tmp1 = ((uint32_t)0x03) << tmpmask;
+ tmpreg &= ~tmp1;
+ tmpreg |= ~DBGAFR_SWJCFG_MASK;
+ }
+ else
+ {
+ tmpreg &= ~(tmp << ((GPIO_Remap >> 0x15)*0x10));
+ tmpreg |= ~DBGAFR_SWJCFG_MASK;
+ }
+
+ if (NewState != DISABLE)
+ {
+ tmpreg |= (tmp << ((GPIO_Remap >> 0x15)*0x10));
+ }
+
+ if((GPIO_Remap & 0x80000000) == 0x80000000)
+ {
+ AFIO->MAPR2 = tmpreg;
+ }
+ else
+ {
+ AFIO->MAPR = tmpreg;
+ }
+}
+
+/**
+ * @brief Selects the GPIO pin used as EXTI Line.
+ * @param GPIO_PortSource: selects the GPIO port to be used as source for EXTI lines.
+ * This parameter can be GPIO_PortSourceGPIOx where x can be (A..G).
+ * @param GPIO_PinSource: specifies the EXTI line to be configured.
+ * This parameter can be GPIO_PinSourcex where x can be (0..15).
+ * @retval None
+ */
+void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource)
+{
+ uint32_t tmp = 0x00;
+ /* Check the parameters */
+ assert_param(IS_GPIO_EXTI_PORT_SOURCE(GPIO_PortSource));
+ assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource));
+
+ tmp = ((uint32_t)0x0F) << (0x04 * (GPIO_PinSource & (uint8_t)0x03));
+ AFIO->EXTICR[GPIO_PinSource >> 0x02] &= ~tmp;
+ AFIO->EXTICR[GPIO_PinSource >> 0x02] |= (((uint32_t)GPIO_PortSource) << (0x04 * (GPIO_PinSource & (uint8_t)0x03)));
+}
+
+/**
+ * @brief Selects the Ethernet media interface.
+ * @note This function applies only to STM32 Connectivity line devices.
+ * @param GPIO_ETH_MediaInterface: specifies the Media Interface mode.
+ * This parameter can be one of the following values:
+ * @arg GPIO_ETH_MediaInterface_MII: MII mode
+ * @arg GPIO_ETH_MediaInterface_RMII: RMII mode
+ * @retval None
+ */
+void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface)
+{
+ assert_param(IS_GPIO_ETH_MEDIA_INTERFACE(GPIO_ETH_MediaInterface));
+
+ /* Configure MII_RMII selection bit */
+ *(__IO uint32_t *) MAPR_MII_RMII_SEL_BB = GPIO_ETH_MediaInterface;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_i2c.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_i2c.c
new file mode 100644
index 00000000..88967268
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_i2c.c
@@ -0,0 +1,1331 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_i2c.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the I2C firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_i2c.h"
+#include "stm32f10x_rcc.h"
+
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup I2C
+ * @brief I2C driver modules
+ * @{
+ */
+
+/** @defgroup I2C_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Private_Defines
+ * @{
+ */
+
+/* I2C SPE mask */
+#define CR1_PE_Set ((uint16_t)0x0001)
+#define CR1_PE_Reset ((uint16_t)0xFFFE)
+
+/* I2C START mask */
+#define CR1_START_Set ((uint16_t)0x0100)
+#define CR1_START_Reset ((uint16_t)0xFEFF)
+
+/* I2C STOP mask */
+#define CR1_STOP_Set ((uint16_t)0x0200)
+#define CR1_STOP_Reset ((uint16_t)0xFDFF)
+
+/* I2C ACK mask */
+#define CR1_ACK_Set ((uint16_t)0x0400)
+#define CR1_ACK_Reset ((uint16_t)0xFBFF)
+
+/* I2C ENGC mask */
+#define CR1_ENGC_Set ((uint16_t)0x0040)
+#define CR1_ENGC_Reset ((uint16_t)0xFFBF)
+
+/* I2C SWRST mask */
+#define CR1_SWRST_Set ((uint16_t)0x8000)
+#define CR1_SWRST_Reset ((uint16_t)0x7FFF)
+
+/* I2C PEC mask */
+#define CR1_PEC_Set ((uint16_t)0x1000)
+#define CR1_PEC_Reset ((uint16_t)0xEFFF)
+
+/* I2C ENPEC mask */
+#define CR1_ENPEC_Set ((uint16_t)0x0020)
+#define CR1_ENPEC_Reset ((uint16_t)0xFFDF)
+
+/* I2C ENARP mask */
+#define CR1_ENARP_Set ((uint16_t)0x0010)
+#define CR1_ENARP_Reset ((uint16_t)0xFFEF)
+
+/* I2C NOSTRETCH mask */
+#define CR1_NOSTRETCH_Set ((uint16_t)0x0080)
+#define CR1_NOSTRETCH_Reset ((uint16_t)0xFF7F)
+
+/* I2C registers Masks */
+#define CR1_CLEAR_Mask ((uint16_t)0xFBF5)
+
+/* I2C DMAEN mask */
+#define CR2_DMAEN_Set ((uint16_t)0x0800)
+#define CR2_DMAEN_Reset ((uint16_t)0xF7FF)
+
+/* I2C LAST mask */
+#define CR2_LAST_Set ((uint16_t)0x1000)
+#define CR2_LAST_Reset ((uint16_t)0xEFFF)
+
+/* I2C FREQ mask */
+#define CR2_FREQ_Reset ((uint16_t)0xFFC0)
+
+/* I2C ADD0 mask */
+#define OAR1_ADD0_Set ((uint16_t)0x0001)
+#define OAR1_ADD0_Reset ((uint16_t)0xFFFE)
+
+/* I2C ENDUAL mask */
+#define OAR2_ENDUAL_Set ((uint16_t)0x0001)
+#define OAR2_ENDUAL_Reset ((uint16_t)0xFFFE)
+
+/* I2C ADD2 mask */
+#define OAR2_ADD2_Reset ((uint16_t)0xFF01)
+
+/* I2C F/S mask */
+#define CCR_FS_Set ((uint16_t)0x8000)
+
+/* I2C CCR mask */
+#define CCR_CCR_Set ((uint16_t)0x0FFF)
+
+/* I2C FLAG mask */
+#define FLAG_Mask ((uint32_t)0x00FFFFFF)
+
+/* I2C Interrupt Enable mask */
+#define ITEN_Mask ((uint32_t)0x07000000)
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the I2Cx peripheral registers to their default reset values.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @retval None
+ */
+void I2C_DeInit(I2C_TypeDef* I2Cx)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+
+ if (I2Cx == I2C1)
+ {
+ /* Enable I2C1 reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, ENABLE);
+ /* Release I2C1 from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, DISABLE);
+ }
+ else
+ {
+ /* Enable I2C2 reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, ENABLE);
+ /* Release I2C2 from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, DISABLE);
+ }
+}
+
+/**
+ * @brief Initializes the I2Cx peripheral according to the specified
+ * parameters in the I2C_InitStruct.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_InitStruct: pointer to a I2C_InitTypeDef structure that
+ * contains the configuration information for the specified I2C peripheral.
+ * @retval None
+ */
+void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct)
+{
+ uint16_t tmpreg = 0, freqrange = 0;
+ uint16_t result = 0x04;
+ uint32_t pclk1 = 8000000;
+ RCC_ClocksTypeDef rcc_clocks;
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_CLOCK_SPEED(I2C_InitStruct->I2C_ClockSpeed));
+ assert_param(IS_I2C_MODE(I2C_InitStruct->I2C_Mode));
+ assert_param(IS_I2C_DUTY_CYCLE(I2C_InitStruct->I2C_DutyCycle));
+ assert_param(IS_I2C_OWN_ADDRESS1(I2C_InitStruct->I2C_OwnAddress1));
+ assert_param(IS_I2C_ACK_STATE(I2C_InitStruct->I2C_Ack));
+ assert_param(IS_I2C_ACKNOWLEDGE_ADDRESS(I2C_InitStruct->I2C_AcknowledgedAddress));
+
+/*---------------------------- I2Cx CR2 Configuration ------------------------*/
+ /* Get the I2Cx CR2 value */
+ tmpreg = I2Cx->CR2;
+ /* Clear frequency FREQ[5:0] bits */
+ tmpreg &= CR2_FREQ_Reset;
+ /* Get pclk1 frequency value */
+ RCC_GetClocksFreq(&rcc_clocks);
+ pclk1 = rcc_clocks.PCLK1_Frequency;
+ /* Set frequency bits depending on pclk1 value */
+ freqrange = (uint16_t)(pclk1 / 1000000);
+ tmpreg |= freqrange;
+ /* Write to I2Cx CR2 */
+ I2Cx->CR2 = tmpreg;
+
+/*---------------------------- I2Cx CCR Configuration ------------------------*/
+ /* Disable the selected I2C peripheral to configure TRISE */
+ I2Cx->CR1 &= CR1_PE_Reset;
+ /* Reset tmpreg value */
+ /* Clear F/S, DUTY and CCR[11:0] bits */
+ tmpreg = 0;
+
+ /* Configure speed in standard mode */
+ if (I2C_InitStruct->I2C_ClockSpeed <= 100000)
+ {
+ /* Standard mode speed calculate */
+ result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed << 1));
+ /* Test if CCR value is under 0x4*/
+ if (result < 0x04)
+ {
+ /* Set minimum allowed value */
+ result = 0x04;
+ }
+ /* Set speed value for standard mode */
+ tmpreg |= result;
+ /* Set Maximum Rise Time for standard mode */
+ I2Cx->TRISE = freqrange + 1;
+ }
+ /* Configure speed in fast mode */
+ else /*(I2C_InitStruct->I2C_ClockSpeed <= 400000)*/
+ {
+ if (I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_2)
+ {
+ /* Fast mode speed calculate: Tlow/Thigh = 2 */
+ result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 3));
+ }
+ else /*I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_16_9*/
+ {
+ /* Fast mode speed calculate: Tlow/Thigh = 16/9 */
+ result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 25));
+ /* Set DUTY bit */
+ result |= I2C_DutyCycle_16_9;
+ }
+
+ /* Test if CCR value is under 0x1*/
+ if ((result & CCR_CCR_Set) == 0)
+ {
+ /* Set minimum allowed value */
+ result |= (uint16_t)0x0001;
+ }
+ /* Set speed value and set F/S bit for fast mode */
+ tmpreg |= (uint16_t)(result | CCR_FS_Set);
+ /* Set Maximum Rise Time for fast mode */
+ I2Cx->TRISE = (uint16_t)(((freqrange * (uint16_t)300) / (uint16_t)1000) + (uint16_t)1);
+ }
+
+ /* Write to I2Cx CCR */
+ I2Cx->CCR = tmpreg;
+ /* Enable the selected I2C peripheral */
+ I2Cx->CR1 |= CR1_PE_Set;
+
+/*---------------------------- I2Cx CR1 Configuration ------------------------*/
+ /* Get the I2Cx CR1 value */
+ tmpreg = I2Cx->CR1;
+ /* Clear ACK, SMBTYPE and SMBUS bits */
+ tmpreg &= CR1_CLEAR_Mask;
+ /* Configure I2Cx: mode and acknowledgement */
+ /* Set SMBTYPE and SMBUS bits according to I2C_Mode value */
+ /* Set ACK bit according to I2C_Ack value */
+ tmpreg |= (uint16_t)((uint32_t)I2C_InitStruct->I2C_Mode | I2C_InitStruct->I2C_Ack);
+ /* Write to I2Cx CR1 */
+ I2Cx->CR1 = tmpreg;
+
+/*---------------------------- I2Cx OAR1 Configuration -----------------------*/
+ /* Set I2Cx Own Address1 and acknowledged address */
+ I2Cx->OAR1 = (I2C_InitStruct->I2C_AcknowledgedAddress | I2C_InitStruct->I2C_OwnAddress1);
+}
+
+/**
+ * @brief Fills each I2C_InitStruct member with its default value.
+ * @param I2C_InitStruct: pointer to an I2C_InitTypeDef structure which will be initialized.
+ * @retval None
+ */
+void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct)
+{
+/*---------------- Reset I2C init structure parameters values ----------------*/
+ /* initialize the I2C_ClockSpeed member */
+ I2C_InitStruct->I2C_ClockSpeed = 5000;
+ /* Initialize the I2C_Mode member */
+ I2C_InitStruct->I2C_Mode = I2C_Mode_I2C;
+ /* Initialize the I2C_DutyCycle member */
+ I2C_InitStruct->I2C_DutyCycle = I2C_DutyCycle_2;
+ /* Initialize the I2C_OwnAddress1 member */
+ I2C_InitStruct->I2C_OwnAddress1 = 0;
+ /* Initialize the I2C_Ack member */
+ I2C_InitStruct->I2C_Ack = I2C_Ack_Disable;
+ /* Initialize the I2C_AcknowledgedAddress member */
+ I2C_InitStruct->I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit;
+}
+
+/**
+ * @brief Enables or disables the specified I2C peripheral.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2Cx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected I2C peripheral */
+ I2Cx->CR1 |= CR1_PE_Set;
+ }
+ else
+ {
+ /* Disable the selected I2C peripheral */
+ I2Cx->CR1 &= CR1_PE_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified I2C DMA requests.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C DMA transfer.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected I2C DMA requests */
+ I2Cx->CR2 |= CR2_DMAEN_Set;
+ }
+ else
+ {
+ /* Disable the selected I2C DMA requests */
+ I2Cx->CR2 &= CR2_DMAEN_Reset;
+ }
+}
+
+/**
+ * @brief Specifies if the next DMA transfer will be the last one.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C DMA last transfer.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Next DMA transfer is the last transfer */
+ I2Cx->CR2 |= CR2_LAST_Set;
+ }
+ else
+ {
+ /* Next DMA transfer is not the last transfer */
+ I2Cx->CR2 &= CR2_LAST_Reset;
+ }
+}
+
+/**
+ * @brief Generates I2Cx communication START condition.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C START condition generation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None.
+ */
+void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Generate a START condition */
+ I2Cx->CR1 |= CR1_START_Set;
+ }
+ else
+ {
+ /* Disable the START condition generation */
+ I2Cx->CR1 &= CR1_START_Reset;
+ }
+}
+
+/**
+ * @brief Generates I2Cx communication STOP condition.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C STOP condition generation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None.
+ */
+void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Generate a STOP condition */
+ I2Cx->CR1 |= CR1_STOP_Set;
+ }
+ else
+ {
+ /* Disable the STOP condition generation */
+ I2Cx->CR1 &= CR1_STOP_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified I2C acknowledge feature.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C Acknowledgement.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None.
+ */
+void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the acknowledgement */
+ I2Cx->CR1 |= CR1_ACK_Set;
+ }
+ else
+ {
+ /* Disable the acknowledgement */
+ I2Cx->CR1 &= CR1_ACK_Reset;
+ }
+}
+
+/**
+ * @brief Configures the specified I2C own address2.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param Address: specifies the 7bit I2C own address2.
+ * @retval None.
+ */
+void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address)
+{
+ uint16_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+
+ /* Get the old register value */
+ tmpreg = I2Cx->OAR2;
+
+ /* Reset I2Cx Own address2 bit [7:1] */
+ tmpreg &= OAR2_ADD2_Reset;
+
+ /* Set I2Cx Own address2 */
+ tmpreg |= (uint16_t)((uint16_t)Address & (uint16_t)0x00FE);
+
+ /* Store the new register value */
+ I2Cx->OAR2 = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the specified I2C dual addressing mode.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C dual addressing mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable dual addressing mode */
+ I2Cx->OAR2 |= OAR2_ENDUAL_Set;
+ }
+ else
+ {
+ /* Disable dual addressing mode */
+ I2Cx->OAR2 &= OAR2_ENDUAL_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified I2C general call feature.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C General call.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable generall call */
+ I2Cx->CR1 |= CR1_ENGC_Set;
+ }
+ else
+ {
+ /* Disable generall call */
+ I2Cx->CR1 &= CR1_ENGC_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified I2C interrupts.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_IT: specifies the I2C interrupts sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg I2C_IT_BUF: Buffer interrupt mask
+ * @arg I2C_IT_EVT: Event interrupt mask
+ * @arg I2C_IT_ERR: Error interrupt mask
+ * @param NewState: new state of the specified I2C interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ assert_param(IS_I2C_CONFIG_IT(I2C_IT));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected I2C interrupts */
+ I2Cx->CR2 |= I2C_IT;
+ }
+ else
+ {
+ /* Disable the selected I2C interrupts */
+ I2Cx->CR2 &= (uint16_t)~I2C_IT;
+ }
+}
+
+/**
+ * @brief Sends a data byte through the I2Cx peripheral.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param Data: Byte to be transmitted..
+ * @retval None
+ */
+void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ /* Write in the DR register the data to be sent */
+ I2Cx->DR = Data;
+}
+
+/**
+ * @brief Returns the most recent received data by the I2Cx peripheral.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @retval The value of the received data.
+ */
+uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ /* Return the data in the DR register */
+ return (uint8_t)I2Cx->DR;
+}
+
+/**
+ * @brief Transmits the address byte to select the slave device.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param Address: specifies the slave address which will be transmitted
+ * @param I2C_Direction: specifies whether the I2C device will be a
+ * Transmitter or a Receiver. This parameter can be one of the following values
+ * @arg I2C_Direction_Transmitter: Transmitter mode
+ * @arg I2C_Direction_Receiver: Receiver mode
+ * @retval None.
+ */
+void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_DIRECTION(I2C_Direction));
+ /* Test on the direction to set/reset the read/write bit */
+ if (I2C_Direction != I2C_Direction_Transmitter)
+ {
+ /* Set the address bit0 for read */
+ Address |= OAR1_ADD0_Set;
+ }
+ else
+ {
+ /* Reset the address bit0 for write */
+ Address &= OAR1_ADD0_Reset;
+ }
+ /* Send the address */
+ I2Cx->DR = Address;
+}
+
+/**
+ * @brief Reads the specified I2C register and returns its value.
+ * @param I2C_Register: specifies the register to read.
+ * This parameter can be one of the following values:
+ * @arg I2C_Register_CR1: CR1 register.
+ * @arg I2C_Register_CR2: CR2 register.
+ * @arg I2C_Register_OAR1: OAR1 register.
+ * @arg I2C_Register_OAR2: OAR2 register.
+ * @arg I2C_Register_DR: DR register.
+ * @arg I2C_Register_SR1: SR1 register.
+ * @arg I2C_Register_SR2: SR2 register.
+ * @arg I2C_Register_CCR: CCR register.
+ * @arg I2C_Register_TRISE: TRISE register.
+ * @retval The value of the read register.
+ */
+uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_REGISTER(I2C_Register));
+
+ tmp = (uint32_t) I2Cx;
+ tmp += I2C_Register;
+
+ /* Return the selected register value */
+ return (*(__IO uint16_t *) tmp);
+}
+
+/**
+ * @brief Enables or disables the specified I2C software reset.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C software reset.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Peripheral under reset */
+ I2Cx->CR1 |= CR1_SWRST_Set;
+ }
+ else
+ {
+ /* Peripheral not under reset */
+ I2Cx->CR1 &= CR1_SWRST_Reset;
+ }
+}
+
+/**
+ * @brief Selects the specified I2C NACK position in master receiver mode.
+ * This function is useful in I2C Master Receiver mode when the number
+ * of data to be received is equal to 2. In this case, this function
+ * should be called (with parameter I2C_NACKPosition_Next) before data
+ * reception starts,as described in the 2-byte reception procedure
+ * recommended in Reference Manual in Section: Master receiver.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_NACKPosition: specifies the NACK position.
+ * This parameter can be one of the following values:
+ * @arg I2C_NACKPosition_Next: indicates that the next byte will be the last
+ * received byte.
+ * @arg I2C_NACKPosition_Current: indicates that current byte is the last
+ * received byte.
+ *
+ * @note This function configures the same bit (POS) as I2C_PECPositionConfig()
+ * but is intended to be used in I2C mode while I2C_PECPositionConfig()
+ * is intended to used in SMBUS mode.
+ *
+ * @retval None
+ */
+void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_NACK_POSITION(I2C_NACKPosition));
+
+ /* Check the input parameter */
+ if (I2C_NACKPosition == I2C_NACKPosition_Next)
+ {
+ /* Next byte in shift register is the last received byte */
+ I2Cx->CR1 |= I2C_NACKPosition_Next;
+ }
+ else
+ {
+ /* Current byte in shift register is the last received byte */
+ I2Cx->CR1 &= I2C_NACKPosition_Current;
+ }
+}
+
+/**
+ * @brief Drives the SMBusAlert pin high or low for the specified I2C.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_SMBusAlert: specifies SMBAlert pin level.
+ * This parameter can be one of the following values:
+ * @arg I2C_SMBusAlert_Low: SMBAlert pin driven low
+ * @arg I2C_SMBusAlert_High: SMBAlert pin driven high
+ * @retval None
+ */
+void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_SMBUS_ALERT(I2C_SMBusAlert));
+ if (I2C_SMBusAlert == I2C_SMBusAlert_Low)
+ {
+ /* Drive the SMBusAlert pin Low */
+ I2Cx->CR1 |= I2C_SMBusAlert_Low;
+ }
+ else
+ {
+ /* Drive the SMBusAlert pin High */
+ I2Cx->CR1 &= I2C_SMBusAlert_High;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified I2C PEC transfer.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C PEC transmission.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected I2C PEC transmission */
+ I2Cx->CR1 |= CR1_PEC_Set;
+ }
+ else
+ {
+ /* Disable the selected I2C PEC transmission */
+ I2Cx->CR1 &= CR1_PEC_Reset;
+ }
+}
+
+/**
+ * @brief Selects the specified I2C PEC position.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_PECPosition: specifies the PEC position.
+ * This parameter can be one of the following values:
+ * @arg I2C_PECPosition_Next: indicates that the next byte is PEC
+ * @arg I2C_PECPosition_Current: indicates that current byte is PEC
+ *
+ * @note This function configures the same bit (POS) as I2C_NACKPositionConfig()
+ * but is intended to be used in SMBUS mode while I2C_NACKPositionConfig()
+ * is intended to used in I2C mode.
+ *
+ * @retval None
+ */
+void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_PEC_POSITION(I2C_PECPosition));
+ if (I2C_PECPosition == I2C_PECPosition_Next)
+ {
+ /* Next byte in shift register is PEC */
+ I2Cx->CR1 |= I2C_PECPosition_Next;
+ }
+ else
+ {
+ /* Current byte in shift register is PEC */
+ I2Cx->CR1 &= I2C_PECPosition_Current;
+ }
+}
+
+/**
+ * @brief Enables or disables the PEC value calculation of the transferred bytes.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2Cx PEC value calculation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected I2C PEC calculation */
+ I2Cx->CR1 |= CR1_ENPEC_Set;
+ }
+ else
+ {
+ /* Disable the selected I2C PEC calculation */
+ I2Cx->CR1 &= CR1_ENPEC_Reset;
+ }
+}
+
+/**
+ * @brief Returns the PEC value for the specified I2C.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @retval The PEC value.
+ */
+uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ /* Return the selected I2C PEC value */
+ return ((I2Cx->SR2) >> 8);
+}
+
+/**
+ * @brief Enables or disables the specified I2C ARP.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2Cx ARP.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected I2C ARP */
+ I2Cx->CR1 |= CR1_ENARP_Set;
+ }
+ else
+ {
+ /* Disable the selected I2C ARP */
+ I2Cx->CR1 &= CR1_ENARP_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified I2C Clock stretching.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2Cx Clock stretching.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState == DISABLE)
+ {
+ /* Enable the selected I2C Clock stretching */
+ I2Cx->CR1 |= CR1_NOSTRETCH_Set;
+ }
+ else
+ {
+ /* Disable the selected I2C Clock stretching */
+ I2Cx->CR1 &= CR1_NOSTRETCH_Reset;
+ }
+}
+
+/**
+ * @brief Selects the specified I2C fast mode duty cycle.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_DutyCycle: specifies the fast mode duty cycle.
+ * This parameter can be one of the following values:
+ * @arg I2C_DutyCycle_2: I2C fast mode Tlow/Thigh = 2
+ * @arg I2C_DutyCycle_16_9: I2C fast mode Tlow/Thigh = 16/9
+ * @retval None
+ */
+void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_DUTY_CYCLE(I2C_DutyCycle));
+ if (I2C_DutyCycle != I2C_DutyCycle_16_9)
+ {
+ /* I2C fast mode Tlow/Thigh=2 */
+ I2Cx->CCR &= I2C_DutyCycle_2;
+ }
+ else
+ {
+ /* I2C fast mode Tlow/Thigh=16/9 */
+ I2Cx->CCR |= I2C_DutyCycle_16_9;
+ }
+}
+
+
+
+/**
+ * @brief
+ ****************************************************************************************
+ *
+ * I2C State Monitoring Functions
+ *
+ ****************************************************************************************
+ * This I2C driver provides three different ways for I2C state monitoring
+ * depending on the application requirements and constraints:
+ *
+ *
+ * 1) Basic state monitoring:
+ * Using I2C_CheckEvent() function:
+ * It compares the status registers (SR1 and SR2) content to a given event
+ * (can be the combination of one or more flags).
+ * It returns SUCCESS if the current status includes the given flags
+ * and returns ERROR if one or more flags are missing in the current status.
+ * - When to use:
+ * - This function is suitable for most applications as well as for startup
+ * activity since the events are fully described in the product reference manual
+ * (RM0008).
+ * - It is also suitable for users who need to define their own events.
+ * - Limitations:
+ * - If an error occurs (ie. error flags are set besides to the monitored flags),
+ * the I2C_CheckEvent() function may return SUCCESS despite the communication
+ * hold or corrupted real state.
+ * In this case, it is advised to use error interrupts to monitor the error
+ * events and handle them in the interrupt IRQ handler.
+ *
+ * @note
+ * For error management, it is advised to use the following functions:
+ * - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR).
+ * - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs.
+ * Where x is the peripheral instance (I2C1, I2C2 ...)
+ * - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler()
+ * in order to determine which error occured.
+ * - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd()
+ * and/or I2C_GenerateStop() in order to clear the error flag and source,
+ * and return to correct communication status.
+ *
+ *
+ * 2) Advanced state monitoring:
+ * Using the function I2C_GetLastEvent() which returns the image of both status
+ * registers in a single word (uint32_t) (Status Register 2 value is shifted left
+ * by 16 bits and concatenated to Status Register 1).
+ * - When to use:
+ * - This function is suitable for the same applications above but it allows to
+ * overcome the mentioned limitation of I2C_GetFlagStatus() function.
+ * The returned value could be compared to events already defined in the
+ * library (stm32f10x_i2c.h) or to custom values defined by user.
+ * - This function is suitable when multiple flags are monitored at the same time.
+ * - At the opposite of I2C_CheckEvent() function, this function allows user to
+ * choose when an event is accepted (when all events flags are set and no
+ * other flags are set or just when the needed flags are set like
+ * I2C_CheckEvent() function).
+ * - Limitations:
+ * - User may need to define his own events.
+ * - Same remark concerning the error management is applicable for this
+ * function if user decides to check only regular communication flags (and
+ * ignores error flags).
+ *
+ *
+ * 3) Flag-based state monitoring:
+ * Using the function I2C_GetFlagStatus() which simply returns the status of
+ * one single flag (ie. I2C_FLAG_RXNE ...).
+ * - When to use:
+ * - This function could be used for specific applications or in debug phase.
+ * - It is suitable when only one flag checking is needed (most I2C events
+ * are monitored through multiple flags).
+ * - Limitations:
+ * - When calling this function, the Status register is accessed. Some flags are
+ * cleared when the status register is accessed. So checking the status
+ * of one Flag, may clear other ones.
+ * - Function may need to be called twice or more in order to monitor one
+ * single event.
+ *
+ * For detailed description of Events, please refer to section I2C_Events in
+ * stm32f10x_i2c.h file.
+ *
+ */
+
+/**
+ *
+ * 1) Basic state monitoring
+ *******************************************************************************
+ */
+
+/**
+ * @brief Checks whether the last I2Cx Event is equal to the one passed
+ * as parameter.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_EVENT: specifies the event to be checked.
+ * This parameter can be one of the following values:
+ * @arg I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED : EV1
+ * @arg I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED : EV1
+ * @arg I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED : EV1
+ * @arg I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED : EV1
+ * @arg I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED : EV1
+ * @arg I2C_EVENT_SLAVE_BYTE_RECEIVED : EV2
+ * @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF) : EV2
+ * @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL) : EV2
+ * @arg I2C_EVENT_SLAVE_BYTE_TRANSMITTED : EV3
+ * @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF) : EV3
+ * @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL) : EV3
+ * @arg I2C_EVENT_SLAVE_ACK_FAILURE : EV3_2
+ * @arg I2C_EVENT_SLAVE_STOP_DETECTED : EV4
+ * @arg I2C_EVENT_MASTER_MODE_SELECT : EV5
+ * @arg I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED : EV6
+ * @arg I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED : EV6
+ * @arg I2C_EVENT_MASTER_BYTE_RECEIVED : EV7
+ * @arg I2C_EVENT_MASTER_BYTE_TRANSMITTING : EV8
+ * @arg I2C_EVENT_MASTER_BYTE_TRANSMITTED : EV8_2
+ * @arg I2C_EVENT_MASTER_MODE_ADDRESS10 : EV9
+ *
+ * @note: For detailed description of Events, please refer to section
+ * I2C_Events in stm32f10x_i2c.h file.
+ *
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: Last event is equal to the I2C_EVENT
+ * - ERROR: Last event is different from the I2C_EVENT
+ */
+ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT)
+{
+ uint32_t lastevent = 0;
+ uint32_t flag1 = 0, flag2 = 0;
+ ErrorStatus status = ERROR;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_EVENT(I2C_EVENT));
+
+ /* Read the I2Cx status register */
+ flag1 = I2Cx->SR1;
+ flag2 = I2Cx->SR2;
+ flag2 = flag2 << 16;
+
+ /* Get the last event value from I2C status register */
+ lastevent = (flag1 | flag2) & FLAG_Mask;
+
+ /* Check whether the last event contains the I2C_EVENT */
+ if ((lastevent & I2C_EVENT) == I2C_EVENT)
+ {
+ /* SUCCESS: last event is equal to I2C_EVENT */
+ status = SUCCESS;
+ }
+ else
+ {
+ /* ERROR: last event is different from I2C_EVENT */
+ status = ERROR;
+ }
+ /* Return status */
+ return status;
+}
+
+/**
+ *
+ * 2) Advanced state monitoring
+ *******************************************************************************
+ */
+
+/**
+ * @brief Returns the last I2Cx Event.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ *
+ * @note: For detailed description of Events, please refer to section
+ * I2C_Events in stm32f10x_i2c.h file.
+ *
+ * @retval The last event
+ */
+uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx)
+{
+ uint32_t lastevent = 0;
+ uint32_t flag1 = 0, flag2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+
+ /* Read the I2Cx status register */
+ flag1 = I2Cx->SR1;
+ flag2 = I2Cx->SR2;
+ flag2 = flag2 << 16;
+
+ /* Get the last event value from I2C status register */
+ lastevent = (flag1 | flag2) & FLAG_Mask;
+
+ /* Return status */
+ return lastevent;
+}
+
+/**
+ *
+ * 3) Flag-based state monitoring
+ *******************************************************************************
+ */
+
+/**
+ * @brief Checks whether the specified I2C flag is set or not.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_FLAG_DUALF: Dual flag (Slave mode)
+ * @arg I2C_FLAG_SMBHOST: SMBus host header (Slave mode)
+ * @arg I2C_FLAG_SMBDEFAULT: SMBus default header (Slave mode)
+ * @arg I2C_FLAG_GENCALL: General call header flag (Slave mode)
+ * @arg I2C_FLAG_TRA: Transmitter/Receiver flag
+ * @arg I2C_FLAG_BUSY: Bus busy flag
+ * @arg I2C_FLAG_MSL: Master/Slave flag
+ * @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+ * @arg I2C_FLAG_PECERR: PEC error in reception flag
+ * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
+ * @arg I2C_FLAG_BERR: Bus error flag
+ * @arg I2C_FLAG_TXE: Data register empty flag (Transmitter)
+ * @arg I2C_FLAG_RXNE: Data register not empty (Receiver) flag
+ * @arg I2C_FLAG_STOPF: Stop detection flag (Slave mode)
+ * @arg I2C_FLAG_ADD10: 10-bit header sent flag (Master mode)
+ * @arg I2C_FLAG_BTF: Byte transfer finished flag
+ * @arg I2C_FLAG_ADDR: Address sent flag (Master mode) "ADSL"
+ * Address matched flag (Slave mode)"ENDA"
+ * @arg I2C_FLAG_SB: Start bit flag (Master mode)
+ * @retval The new state of I2C_FLAG (SET or RESET).
+ */
+FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ __IO uint32_t i2creg = 0, i2cxbase = 0;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_GET_FLAG(I2C_FLAG));
+
+ /* Get the I2Cx peripheral base address */
+ i2cxbase = (uint32_t)I2Cx;
+
+ /* Read flag register index */
+ i2creg = I2C_FLAG >> 28;
+
+ /* Get bit[23:0] of the flag */
+ I2C_FLAG &= FLAG_Mask;
+
+ if(i2creg != 0)
+ {
+ /* Get the I2Cx SR1 register address */
+ i2cxbase += 0x14;
+ }
+ else
+ {
+ /* Flag in I2Cx SR2 Register */
+ I2C_FLAG = (uint32_t)(I2C_FLAG >> 16);
+ /* Get the I2Cx SR2 register address */
+ i2cxbase += 0x18;
+ }
+
+ if(((*(__IO uint32_t *)i2cxbase) & I2C_FLAG) != (uint32_t)RESET)
+ {
+ /* I2C_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* I2C_FLAG is reset */
+ bitstatus = RESET;
+ }
+
+ /* Return the I2C_FLAG status */
+ return bitstatus;
+}
+
+
+
+/**
+ * @brief Clears the I2Cx's pending flags.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_FLAG: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+ * @arg I2C_FLAG_PECERR: PEC error in reception flag
+ * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
+ * @arg I2C_FLAG_BERR: Bus error flag
+ *
+ * @note
+ * - STOPF (STOP detection) is cleared by software sequence: a read operation
+ * to I2C_SR1 register (I2C_GetFlagStatus()) followed by a write operation
+ * to I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral).
+ * - ADD10 (10-bit header sent) is cleared by software sequence: a read
+ * operation to I2C_SR1 (I2C_GetFlagStatus()) followed by writing the
+ * second byte of the address in DR register.
+ * - BTF (Byte Transfer Finished) is cleared by software sequence: a read
+ * operation to I2C_SR1 register (I2C_GetFlagStatus()) followed by a
+ * read/write to I2C_DR register (I2C_SendData()).
+ * - ADDR (Address sent) is cleared by software sequence: a read operation to
+ * I2C_SR1 register (I2C_GetFlagStatus()) followed by a read operation to
+ * I2C_SR2 register ((void)(I2Cx->SR2)).
+ * - SB (Start Bit) is cleared software sequence: a read operation to I2C_SR1
+ * register (I2C_GetFlagStatus()) followed by a write operation to I2C_DR
+ * register (I2C_SendData()).
+ * @retval None
+ */
+void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG)
+{
+ uint32_t flagpos = 0;
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_CLEAR_FLAG(I2C_FLAG));
+ /* Get the I2C flag position */
+ flagpos = I2C_FLAG & FLAG_Mask;
+ /* Clear the selected I2C flag */
+ I2Cx->SR1 = (uint16_t)~flagpos;
+}
+
+/**
+ * @brief Checks whether the specified I2C interrupt has occurred or not.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_IT: specifies the interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_SMBALERT: SMBus Alert flag
+ * @arg I2C_IT_TIMEOUT: Timeout or Tlow error flag
+ * @arg I2C_IT_PECERR: PEC error in reception flag
+ * @arg I2C_IT_OVR: Overrun/Underrun flag (Slave mode)
+ * @arg I2C_IT_AF: Acknowledge failure flag
+ * @arg I2C_IT_ARLO: Arbitration lost flag (Master mode)
+ * @arg I2C_IT_BERR: Bus error flag
+ * @arg I2C_IT_TXE: Data register empty flag (Transmitter)
+ * @arg I2C_IT_RXNE: Data register not empty (Receiver) flag
+ * @arg I2C_IT_STOPF: Stop detection flag (Slave mode)
+ * @arg I2C_IT_ADD10: 10-bit header sent flag (Master mode)
+ * @arg I2C_IT_BTF: Byte transfer finished flag
+ * @arg I2C_IT_ADDR: Address sent flag (Master mode) "ADSL"
+ * Address matched flag (Slave mode)"ENDAD"
+ * @arg I2C_IT_SB: Start bit flag (Master mode)
+ * @retval The new state of I2C_IT (SET or RESET).
+ */
+ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t enablestatus = 0;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_GET_IT(I2C_IT));
+
+ /* Check if the interrupt source is enabled or not */
+ enablestatus = (uint32_t)(((I2C_IT & ITEN_Mask) >> 16) & (I2Cx->CR2)) ;
+
+ /* Get bit[23:0] of the flag */
+ I2C_IT &= FLAG_Mask;
+
+ /* Check the status of the specified I2C flag */
+ if (((I2Cx->SR1 & I2C_IT) != (uint32_t)RESET) && enablestatus)
+ {
+ /* I2C_IT is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* I2C_IT is reset */
+ bitstatus = RESET;
+ }
+ /* Return the I2C_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the I2Cx’s interrupt pending bits.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_IT: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg I2C_IT_SMBALERT: SMBus Alert interrupt
+ * @arg I2C_IT_TIMEOUT: Timeout or Tlow error interrupt
+ * @arg I2C_IT_PECERR: PEC error in reception interrupt
+ * @arg I2C_IT_OVR: Overrun/Underrun interrupt (Slave mode)
+ * @arg I2C_IT_AF: Acknowledge failure interrupt
+ * @arg I2C_IT_ARLO: Arbitration lost interrupt (Master mode)
+ * @arg I2C_IT_BERR: Bus error interrupt
+ *
+ * @note
+ * - STOPF (STOP detection) is cleared by software sequence: a read operation
+ * to I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to
+ * I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral).
+ * - ADD10 (10-bit header sent) is cleared by software sequence: a read
+ * operation to I2C_SR1 (I2C_GetITStatus()) followed by writing the second
+ * byte of the address in I2C_DR register.
+ * - BTF (Byte Transfer Finished) is cleared by software sequence: a read
+ * operation to I2C_SR1 register (I2C_GetITStatus()) followed by a
+ * read/write to I2C_DR register (I2C_SendData()).
+ * - ADDR (Address sent) is cleared by software sequence: a read operation to
+ * I2C_SR1 register (I2C_GetITStatus()) followed by a read operation to
+ * I2C_SR2 register ((void)(I2Cx->SR2)).
+ * - SB (Start Bit) is cleared by software sequence: a read operation to
+ * I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to
+ * I2C_DR register (I2C_SendData()).
+ * @retval None
+ */
+void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT)
+{
+ uint32_t flagpos = 0;
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_CLEAR_IT(I2C_IT));
+ /* Get the I2C flag position */
+ flagpos = I2C_IT & FLAG_Mask;
+ /* Clear the selected I2C flag */
+ I2Cx->SR1 = (uint16_t)~flagpos;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_iwdg.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_iwdg.c
new file mode 100644
index 00000000..9d3b0e85
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_iwdg.c
@@ -0,0 +1,190 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_iwdg.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the IWDG firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_iwdg.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup IWDG
+ * @brief IWDG driver modules
+ * @{
+ */
+
+/** @defgroup IWDG_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Private_Defines
+ * @{
+ */
+
+/* ---------------------- IWDG registers bit mask ----------------------------*/
+
+/* KR register bit mask */
+#define KR_KEY_Reload ((uint16_t)0xAAAA)
+#define KR_KEY_Enable ((uint16_t)0xCCCC)
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Enables or disables write access to IWDG_PR and IWDG_RLR registers.
+ * @param IWDG_WriteAccess: new state of write access to IWDG_PR and IWDG_RLR registers.
+ * This parameter can be one of the following values:
+ * @arg IWDG_WriteAccess_Enable: Enable write access to IWDG_PR and IWDG_RLR registers
+ * @arg IWDG_WriteAccess_Disable: Disable write access to IWDG_PR and IWDG_RLR registers
+ * @retval None
+ */
+void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess)
+{
+ /* Check the parameters */
+ assert_param(IS_IWDG_WRITE_ACCESS(IWDG_WriteAccess));
+ IWDG->KR = IWDG_WriteAccess;
+}
+
+/**
+ * @brief Sets IWDG Prescaler value.
+ * @param IWDG_Prescaler: specifies the IWDG Prescaler value.
+ * This parameter can be one of the following values:
+ * @arg IWDG_Prescaler_4: IWDG prescaler set to 4
+ * @arg IWDG_Prescaler_8: IWDG prescaler set to 8
+ * @arg IWDG_Prescaler_16: IWDG prescaler set to 16
+ * @arg IWDG_Prescaler_32: IWDG prescaler set to 32
+ * @arg IWDG_Prescaler_64: IWDG prescaler set to 64
+ * @arg IWDG_Prescaler_128: IWDG prescaler set to 128
+ * @arg IWDG_Prescaler_256: IWDG prescaler set to 256
+ * @retval None
+ */
+void IWDG_SetPrescaler(uint8_t IWDG_Prescaler)
+{
+ /* Check the parameters */
+ assert_param(IS_IWDG_PRESCALER(IWDG_Prescaler));
+ IWDG->PR = IWDG_Prescaler;
+}
+
+/**
+ * @brief Sets IWDG Reload value.
+ * @param Reload: specifies the IWDG Reload value.
+ * This parameter must be a number between 0 and 0x0FFF.
+ * @retval None
+ */
+void IWDG_SetReload(uint16_t Reload)
+{
+ /* Check the parameters */
+ assert_param(IS_IWDG_RELOAD(Reload));
+ IWDG->RLR = Reload;
+}
+
+/**
+ * @brief Reloads IWDG counter with value defined in the reload register
+ * (write access to IWDG_PR and IWDG_RLR registers disabled).
+ * @param None
+ * @retval None
+ */
+void IWDG_ReloadCounter(void)
+{
+ IWDG->KR = KR_KEY_Reload;
+}
+
+/**
+ * @brief Enables IWDG (write access to IWDG_PR and IWDG_RLR registers disabled).
+ * @param None
+ * @retval None
+ */
+void IWDG_Enable(void)
+{
+ IWDG->KR = KR_KEY_Enable;
+}
+
+/**
+ * @brief Checks whether the specified IWDG flag is set or not.
+ * @param IWDG_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IWDG_FLAG_PVU: Prescaler Value Update on going
+ * @arg IWDG_FLAG_RVU: Reload Value Update on going
+ * @retval The new state of IWDG_FLAG (SET or RESET).
+ */
+FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_IWDG_FLAG(IWDG_FLAG));
+ if ((IWDG->SR & IWDG_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ /* Return the flag status */
+ return bitstatus;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_pwr.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_pwr.c
new file mode 100644
index 00000000..147bf0f8
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_pwr.c
@@ -0,0 +1,307 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_pwr.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the PWR firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_pwr.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup PWR
+ * @brief PWR driver modules
+ * @{
+ */
+
+/** @defgroup PWR_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Private_Defines
+ * @{
+ */
+
+/* --------- PWR registers bit address in the alias region ---------- */
+#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
+
+/* --- CR Register ---*/
+
+/* Alias word address of DBP bit */
+#define CR_OFFSET (PWR_OFFSET + 0x00)
+#define DBP_BitNumber 0x08
+#define CR_DBP_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4))
+
+/* Alias word address of PVDE bit */
+#define PVDE_BitNumber 0x04
+#define CR_PVDE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4))
+
+/* --- CSR Register ---*/
+
+/* Alias word address of EWUP bit */
+#define CSR_OFFSET (PWR_OFFSET + 0x04)
+#define EWUP_BitNumber 0x08
+#define CSR_EWUP_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4))
+
+/* ------------------ PWR registers bit mask ------------------------ */
+
+/* CR register bit mask */
+#define CR_DS_MASK ((uint32_t)0xFFFFFFFC)
+#define CR_PLS_MASK ((uint32_t)0xFFFFFF1F)
+
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the PWR peripheral registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void PWR_DeInit(void)
+{
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE);
+}
+
+/**
+ * @brief Enables or disables access to the RTC and backup registers.
+ * @param NewState: new state of the access to the RTC and backup registers.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void PWR_BackupAccessCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_DBP_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enables or disables the Power Voltage Detector(PVD).
+ * @param NewState: new state of the PVD.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void PWR_PVDCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
+ * @param PWR_PVDLevel: specifies the PVD detection level
+ * This parameter can be one of the following values:
+ * @arg PWR_PVDLevel_2V2: PVD detection level set to 2.2V
+ * @arg PWR_PVDLevel_2V3: PVD detection level set to 2.3V
+ * @arg PWR_PVDLevel_2V4: PVD detection level set to 2.4V
+ * @arg PWR_PVDLevel_2V5: PVD detection level set to 2.5V
+ * @arg PWR_PVDLevel_2V6: PVD detection level set to 2.6V
+ * @arg PWR_PVDLevel_2V7: PVD detection level set to 2.7V
+ * @arg PWR_PVDLevel_2V8: PVD detection level set to 2.8V
+ * @arg PWR_PVDLevel_2V9: PVD detection level set to 2.9V
+ * @retval None
+ */
+void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_PWR_PVD_LEVEL(PWR_PVDLevel));
+ tmpreg = PWR->CR;
+ /* Clear PLS[7:5] bits */
+ tmpreg &= CR_PLS_MASK;
+ /* Set PLS[7:5] bits according to PWR_PVDLevel value */
+ tmpreg |= PWR_PVDLevel;
+ /* Store the new value */
+ PWR->CR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the WakeUp Pin functionality.
+ * @param NewState: new state of the WakeUp Pin functionality.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void PWR_WakeUpPinCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CSR_EWUP_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enters STOP mode.
+ * @param PWR_Regulator: specifies the regulator state in STOP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_Regulator_ON: STOP mode with regulator ON
+ * @arg PWR_Regulator_LowPower: STOP mode with regulator in low power mode
+ * @param PWR_STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_STOPEntry_WFI: enter STOP mode with WFI instruction
+ * @arg PWR_STOPEntry_WFE: enter STOP mode with WFE instruction
+ * @retval None
+ */
+void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR(PWR_Regulator));
+ assert_param(IS_PWR_STOP_ENTRY(PWR_STOPEntry));
+
+ /* Select the regulator state in STOP mode ---------------------------------*/
+ tmpreg = PWR->CR;
+ /* Clear PDDS and LPDS bits */
+ tmpreg &= CR_DS_MASK;
+ /* Set LPDS bit according to PWR_Regulator value */
+ tmpreg |= PWR_Regulator;
+ /* Store the new value */
+ PWR->CR = tmpreg;
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP;
+
+ /* Select STOP mode entry --------------------------------------------------*/
+ if(PWR_STOPEntry == PWR_STOPEntry_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __WFE();
+ }
+
+ /* Reset SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP);
+}
+
+/**
+ * @brief Enters STANDBY mode.
+ * @param None
+ * @retval None
+ */
+void PWR_EnterSTANDBYMode(void)
+{
+ /* Clear Wake-up flag */
+ PWR->CR |= PWR_CR_CWUF;
+ /* Select STANDBY mode */
+ PWR->CR |= PWR_CR_PDDS;
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP;
+/* This option is used to ensure that store operations are completed */
+#if defined ( __CC_ARM )
+ __force_stores();
+#endif
+ /* Request Wait For Interrupt */
+ __WFI();
+}
+
+/**
+ * @brief Checks whether the specified PWR flag is set or not.
+ * @param PWR_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag
+ * @arg PWR_FLAG_SB: StandBy flag
+ * @arg PWR_FLAG_PVDO: PVD Output
+ * @retval The new state of PWR_FLAG (SET or RESET).
+ */
+FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_PWR_GET_FLAG(PWR_FLAG));
+
+ if ((PWR->CSR & PWR_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ /* Return the flag status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the PWR's pending flags.
+ * @param PWR_FLAG: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag
+ * @arg PWR_FLAG_SB: StandBy flag
+ * @retval None
+ */
+void PWR_ClearFlag(uint32_t PWR_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_CLEAR_FLAG(PWR_FLAG));
+
+ PWR->CR |= PWR_FLAG << 2;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_rcc.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_rcc.c
new file mode 100644
index 00000000..4b2ec1f1
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_rcc.c
@@ -0,0 +1,1470 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_rcc.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the RCC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup RCC
+ * @brief RCC driver modules
+ * @{
+ */
+
+/** @defgroup RCC_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Private_Defines
+ * @{
+ */
+
+/* ------------ RCC registers bit address in the alias region ----------- */
+#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
+
+/* --- CR Register ---*/
+
+/* Alias word address of HSION bit */
+#define CR_OFFSET (RCC_OFFSET + 0x00)
+#define HSION_BitNumber 0x00
+#define CR_HSION_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (HSION_BitNumber * 4))
+
+/* Alias word address of PLLON bit */
+#define PLLON_BitNumber 0x18
+#define CR_PLLON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLON_BitNumber * 4))
+
+#ifdef STM32F10X_CL
+ /* Alias word address of PLL2ON bit */
+ #define PLL2ON_BitNumber 0x1A
+ #define CR_PLL2ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL2ON_BitNumber * 4))
+
+ /* Alias word address of PLL3ON bit */
+ #define PLL3ON_BitNumber 0x1C
+ #define CR_PLL3ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL3ON_BitNumber * 4))
+#endif /* STM32F10X_CL */
+
+/* Alias word address of CSSON bit */
+#define CSSON_BitNumber 0x13
+#define CR_CSSON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (CSSON_BitNumber * 4))
+
+/* --- CFGR Register ---*/
+
+/* Alias word address of USBPRE bit */
+#define CFGR_OFFSET (RCC_OFFSET + 0x04)
+
+#ifndef STM32F10X_CL
+ #define USBPRE_BitNumber 0x16
+ #define CFGR_USBPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (USBPRE_BitNumber * 4))
+#else
+ #define OTGFSPRE_BitNumber 0x16
+ #define CFGR_OTGFSPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (OTGFSPRE_BitNumber * 4))
+#endif /* STM32F10X_CL */
+
+/* --- BDCR Register ---*/
+
+/* Alias word address of RTCEN bit */
+#define BDCR_OFFSET (RCC_OFFSET + 0x20)
+#define RTCEN_BitNumber 0x0F
+#define BDCR_RTCEN_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4))
+
+/* Alias word address of BDRST bit */
+#define BDRST_BitNumber 0x10
+#define BDCR_BDRST_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (BDRST_BitNumber * 4))
+
+/* --- CSR Register ---*/
+
+/* Alias word address of LSION bit */
+#define CSR_OFFSET (RCC_OFFSET + 0x24)
+#define LSION_BitNumber 0x00
+#define CSR_LSION_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (LSION_BitNumber * 4))
+
+#ifdef STM32F10X_CL
+/* --- CFGR2 Register ---*/
+
+ /* Alias word address of I2S2SRC bit */
+ #define CFGR2_OFFSET (RCC_OFFSET + 0x2C)
+ #define I2S2SRC_BitNumber 0x11
+ #define CFGR2_I2S2SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S2SRC_BitNumber * 4))
+
+ /* Alias word address of I2S3SRC bit */
+ #define I2S3SRC_BitNumber 0x12
+ #define CFGR2_I2S3SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S3SRC_BitNumber * 4))
+#endif /* STM32F10X_CL */
+
+/* ---------------------- RCC registers bit mask ------------------------ */
+
+/* CR register bit mask */
+#define CR_HSEBYP_Reset ((uint32_t)0xFFFBFFFF)
+#define CR_HSEBYP_Set ((uint32_t)0x00040000)
+#define CR_HSEON_Reset ((uint32_t)0xFFFEFFFF)
+#define CR_HSEON_Set ((uint32_t)0x00010000)
+#define CR_HSITRIM_Mask ((uint32_t)0xFFFFFF07)
+
+/* CFGR register bit mask */
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+ #define CFGR_PLL_Mask ((uint32_t)0xFFC2FFFF)
+#else
+ #define CFGR_PLL_Mask ((uint32_t)0xFFC0FFFF)
+#endif /* STM32F10X_CL */
+
+#define CFGR_PLLMull_Mask ((uint32_t)0x003C0000)
+#define CFGR_PLLSRC_Mask ((uint32_t)0x00010000)
+#define CFGR_PLLXTPRE_Mask ((uint32_t)0x00020000)
+#define CFGR_SWS_Mask ((uint32_t)0x0000000C)
+#define CFGR_SW_Mask ((uint32_t)0xFFFFFFFC)
+#define CFGR_HPRE_Reset_Mask ((uint32_t)0xFFFFFF0F)
+#define CFGR_HPRE_Set_Mask ((uint32_t)0x000000F0)
+#define CFGR_PPRE1_Reset_Mask ((uint32_t)0xFFFFF8FF)
+#define CFGR_PPRE1_Set_Mask ((uint32_t)0x00000700)
+#define CFGR_PPRE2_Reset_Mask ((uint32_t)0xFFFFC7FF)
+#define CFGR_PPRE2_Set_Mask ((uint32_t)0x00003800)
+#define CFGR_ADCPRE_Reset_Mask ((uint32_t)0xFFFF3FFF)
+#define CFGR_ADCPRE_Set_Mask ((uint32_t)0x0000C000)
+
+/* CSR register bit mask */
+#define CSR_RMVF_Set ((uint32_t)0x01000000)
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+/* CFGR2 register bit mask */
+ #define CFGR2_PREDIV1SRC ((uint32_t)0x00010000)
+ #define CFGR2_PREDIV1 ((uint32_t)0x0000000F)
+#endif
+#ifdef STM32F10X_CL
+ #define CFGR2_PREDIV2 ((uint32_t)0x000000F0)
+ #define CFGR2_PLL2MUL ((uint32_t)0x00000F00)
+ #define CFGR2_PLL3MUL ((uint32_t)0x0000F000)
+#endif /* STM32F10X_CL */
+
+/* RCC Flag Mask */
+#define FLAG_Mask ((uint8_t)0x1F)
+
+/* CIR register byte 2 (Bits[15:8]) base address */
+#define CIR_BYTE2_ADDRESS ((uint32_t)0x40021009)
+
+/* CIR register byte 3 (Bits[23:16]) base address */
+#define CIR_BYTE3_ADDRESS ((uint32_t)0x4002100A)
+
+/* CFGR register byte 4 (Bits[31:24]) base address */
+#define CFGR_BYTE4_ADDRESS ((uint32_t)0x40021007)
+
+/* BDCR register base address */
+#define BDCR_ADDRESS (PERIPH_BASE + BDCR_OFFSET)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Private_Variables
+ * @{
+ */
+
+static __I uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9};
+static __I uint8_t ADCPrescTable[4] = {2, 4, 6, 8};
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Resets the RCC clock configuration to the default reset state.
+ * @param None
+ * @retval None
+ */
+void RCC_DeInit(void)
+{
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001;
+
+ /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
+#ifndef STM32F10X_CL
+ RCC->CFGR &= (uint32_t)0xF8FF0000;
+#else
+ RCC->CFGR &= (uint32_t)0xF0FF0000;
+#endif /* STM32F10X_CL */
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
+ RCC->CFGR &= (uint32_t)0xFF80FFFF;
+
+#ifdef STM32F10X_CL
+ /* Reset PLL2ON and PLL3ON bits */
+ RCC->CR &= (uint32_t)0xEBFFFFFF;
+
+ /* Disable all interrupts and clear pending bits */
+ RCC->CIR = 0x00FF0000;
+
+ /* Reset CFGR2 register */
+ RCC->CFGR2 = 0x00000000;
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+ /* Disable all interrupts and clear pending bits */
+ RCC->CIR = 0x009F0000;
+
+ /* Reset CFGR2 register */
+ RCC->CFGR2 = 0x00000000;
+#else
+ /* Disable all interrupts and clear pending bits */
+ RCC->CIR = 0x009F0000;
+#endif /* STM32F10X_CL */
+
+}
+
+/**
+ * @brief Configures the External High Speed oscillator (HSE).
+ * @note HSE can not be stopped if it is used directly or through the PLL as system clock.
+ * @param RCC_HSE: specifies the new state of the HSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_HSE_OFF: HSE oscillator OFF
+ * @arg RCC_HSE_ON: HSE oscillator ON
+ * @arg RCC_HSE_Bypass: HSE oscillator bypassed with external clock
+ * @retval None
+ */
+void RCC_HSEConfig(uint32_t RCC_HSE)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_HSE(RCC_HSE));
+ /* Reset HSEON and HSEBYP bits before configuring the HSE ------------------*/
+ /* Reset HSEON bit */
+ RCC->CR &= CR_HSEON_Reset;
+ /* Reset HSEBYP bit */
+ RCC->CR &= CR_HSEBYP_Reset;
+ /* Configure HSE (RCC_HSE_OFF is already covered by the code section above) */
+ switch(RCC_HSE)
+ {
+ case RCC_HSE_ON:
+ /* Set HSEON bit */
+ RCC->CR |= CR_HSEON_Set;
+ break;
+
+ case RCC_HSE_Bypass:
+ /* Set HSEBYP and HSEON bits */
+ RCC->CR |= CR_HSEBYP_Set | CR_HSEON_Set;
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief Waits for HSE start-up.
+ * @param None
+ * @retval An ErrorStatus enumuration value:
+ * - SUCCESS: HSE oscillator is stable and ready to use
+ * - ERROR: HSE oscillator not yet ready
+ */
+ErrorStatus RCC_WaitForHSEStartUp(void)
+{
+ __IO uint32_t StartUpCounter = 0;
+ ErrorStatus status = ERROR;
+ FlagStatus HSEStatus = RESET;
+
+ /* Wait till HSE is ready and if Time out is reached exit */
+ do
+ {
+ HSEStatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY);
+ StartUpCounter++;
+ } while((StartUpCounter != HSE_STARTUP_TIMEOUT) && (HSEStatus == RESET));
+
+ if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET)
+ {
+ status = SUCCESS;
+ }
+ else
+ {
+ status = ERROR;
+ }
+ return (status);
+}
+
+/**
+ * @brief Adjusts the Internal High Speed oscillator (HSI) calibration value.
+ * @param HSICalibrationValue: specifies the calibration trimming value.
+ * This parameter must be a number between 0 and 0x1F.
+ * @retval None
+ */
+void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_RCC_CALIBRATION_VALUE(HSICalibrationValue));
+ tmpreg = RCC->CR;
+ /* Clear HSITRIM[4:0] bits */
+ tmpreg &= CR_HSITRIM_Mask;
+ /* Set the HSITRIM[4:0] bits according to HSICalibrationValue value */
+ tmpreg |= (uint32_t)HSICalibrationValue << 3;
+ /* Store the new value */
+ RCC->CR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the Internal High Speed oscillator (HSI).
+ * @note HSI can not be stopped if it is used directly or through the PLL as system clock.
+ * @param NewState: new state of the HSI. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_HSICmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_HSION_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Configures the PLL clock source and multiplication factor.
+ * @note This function must be used only when the PLL is disabled.
+ * @param RCC_PLLSource: specifies the PLL entry clock source.
+ * For @b STM32_Connectivity_line_devices or @b STM32_Value_line_devices,
+ * this parameter can be one of the following values:
+ * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry
+ * @arg RCC_PLLSource_PREDIV1: PREDIV1 clock selected as PLL clock entry
+ * For @b other_STM32_devices, this parameter can be one of the following values:
+ * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry
+ * @arg RCC_PLLSource_HSE_Div1: HSE oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSource_HSE_Div2: HSE oscillator clock divided by 2 selected as PLL clock entry
+ * @param RCC_PLLMul: specifies the PLL multiplication factor.
+ * For @b STM32_Connectivity_line_devices, this parameter can be RCC_PLLMul_x where x:{[4,9], 6_5}
+ * For @b other_STM32_devices, this parameter can be RCC_PLLMul_x where x:[2,16]
+ * @retval None
+ */
+void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource));
+ assert_param(IS_RCC_PLL_MUL(RCC_PLLMul));
+
+ tmpreg = RCC->CFGR;
+ /* Clear PLLSRC, PLLXTPRE and PLLMUL[3:0] bits */
+ tmpreg &= CFGR_PLL_Mask;
+ /* Set the PLL configuration bits */
+ tmpreg |= RCC_PLLSource | RCC_PLLMul;
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the PLL.
+ * @note The PLL can not be disabled if it is used as system clock.
+ * @param NewState: new state of the PLL. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_PLLCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CR_PLLON_BB = (uint32_t)NewState;
+}
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+/**
+ * @brief Configures the PREDIV1 division factor.
+ * @note
+ * - This function must be used only when the PLL is disabled.
+ * - This function applies only to STM32 Connectivity line and Value line
+ * devices.
+ * @param RCC_PREDIV1_Source: specifies the PREDIV1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PREDIV1_Source_HSE: HSE selected as PREDIV1 clock
+ * @arg RCC_PREDIV1_Source_PLL2: PLL2 selected as PREDIV1 clock
+ * @note
+ * For @b STM32_Value_line_devices this parameter is always RCC_PREDIV1_Source_HSE
+ * @param RCC_PREDIV1_Div: specifies the PREDIV1 clock division factor.
+ * This parameter can be RCC_PREDIV1_Divx where x:[1,16]
+ * @retval None
+ */
+void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PREDIV1_SOURCE(RCC_PREDIV1_Source));
+ assert_param(IS_RCC_PREDIV1(RCC_PREDIV1_Div));
+
+ tmpreg = RCC->CFGR2;
+ /* Clear PREDIV1[3:0] and PREDIV1SRC bits */
+ tmpreg &= ~(CFGR2_PREDIV1 | CFGR2_PREDIV1SRC);
+ /* Set the PREDIV1 clock source and division factor */
+ tmpreg |= RCC_PREDIV1_Source | RCC_PREDIV1_Div ;
+ /* Store the new value */
+ RCC->CFGR2 = tmpreg;
+}
+#endif
+
+#ifdef STM32F10X_CL
+/**
+ * @brief Configures the PREDIV2 division factor.
+ * @note
+ * - This function must be used only when both PLL2 and PLL3 are disabled.
+ * - This function applies only to STM32 Connectivity line devices.
+ * @param RCC_PREDIV2_Div: specifies the PREDIV2 clock division factor.
+ * This parameter can be RCC_PREDIV2_Divx where x:[1,16]
+ * @retval None
+ */
+void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PREDIV2(RCC_PREDIV2_Div));
+
+ tmpreg = RCC->CFGR2;
+ /* Clear PREDIV2[3:0] bits */
+ tmpreg &= ~CFGR2_PREDIV2;
+ /* Set the PREDIV2 division factor */
+ tmpreg |= RCC_PREDIV2_Div;
+ /* Store the new value */
+ RCC->CFGR2 = tmpreg;
+}
+
+/**
+ * @brief Configures the PLL2 multiplication factor.
+ * @note
+ * - This function must be used only when the PLL2 is disabled.
+ * - This function applies only to STM32 Connectivity line devices.
+ * @param RCC_PLL2Mul: specifies the PLL2 multiplication factor.
+ * This parameter can be RCC_PLL2Mul_x where x:{[8,14], 16, 20}
+ * @retval None
+ */
+void RCC_PLL2Config(uint32_t RCC_PLL2Mul)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL2_MUL(RCC_PLL2Mul));
+
+ tmpreg = RCC->CFGR2;
+ /* Clear PLL2Mul[3:0] bits */
+ tmpreg &= ~CFGR2_PLL2MUL;
+ /* Set the PLL2 configuration bits */
+ tmpreg |= RCC_PLL2Mul;
+ /* Store the new value */
+ RCC->CFGR2 = tmpreg;
+}
+
+
+/**
+ * @brief Enables or disables the PLL2.
+ * @note
+ * - The PLL2 can not be disabled if it is used indirectly as system clock
+ * (i.e. it is used as PLL clock entry that is used as System clock).
+ * - This function applies only to STM32 Connectivity line devices.
+ * @param NewState: new state of the PLL2. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_PLL2Cmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CR_PLL2ON_BB = (uint32_t)NewState;
+}
+
+
+/**
+ * @brief Configures the PLL3 multiplication factor.
+ * @note
+ * - This function must be used only when the PLL3 is disabled.
+ * - This function applies only to STM32 Connectivity line devices.
+ * @param RCC_PLL3Mul: specifies the PLL3 multiplication factor.
+ * This parameter can be RCC_PLL3Mul_x where x:{[8,14], 16, 20}
+ * @retval None
+ */
+void RCC_PLL3Config(uint32_t RCC_PLL3Mul)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL3_MUL(RCC_PLL3Mul));
+
+ tmpreg = RCC->CFGR2;
+ /* Clear PLL3Mul[3:0] bits */
+ tmpreg &= ~CFGR2_PLL3MUL;
+ /* Set the PLL3 configuration bits */
+ tmpreg |= RCC_PLL3Mul;
+ /* Store the new value */
+ RCC->CFGR2 = tmpreg;
+}
+
+
+/**
+ * @brief Enables or disables the PLL3.
+ * @note This function applies only to STM32 Connectivity line devices.
+ * @param NewState: new state of the PLL3. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_PLL3Cmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_PLL3ON_BB = (uint32_t)NewState;
+}
+#endif /* STM32F10X_CL */
+
+/**
+ * @brief Configures the system clock (SYSCLK).
+ * @param RCC_SYSCLKSource: specifies the clock source used as system clock.
+ * This parameter can be one of the following values:
+ * @arg RCC_SYSCLKSource_HSI: HSI selected as system clock
+ * @arg RCC_SYSCLKSource_HSE: HSE selected as system clock
+ * @arg RCC_SYSCLKSource_PLLCLK: PLL selected as system clock
+ * @retval None
+ */
+void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_RCC_SYSCLK_SOURCE(RCC_SYSCLKSource));
+ tmpreg = RCC->CFGR;
+ /* Clear SW[1:0] bits */
+ tmpreg &= CFGR_SW_Mask;
+ /* Set SW[1:0] bits according to RCC_SYSCLKSource value */
+ tmpreg |= RCC_SYSCLKSource;
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @brief Returns the clock source used as system clock.
+ * @param None
+ * @retval The clock source used as system clock. The returned value can
+ * be one of the following:
+ * - 0x00: HSI used as system clock
+ * - 0x04: HSE used as system clock
+ * - 0x08: PLL used as system clock
+ */
+uint8_t RCC_GetSYSCLKSource(void)
+{
+ return ((uint8_t)(RCC->CFGR & CFGR_SWS_Mask));
+}
+
+/**
+ * @brief Configures the AHB clock (HCLK).
+ * @param RCC_SYSCLK: defines the AHB clock divider. This clock is derived from
+ * the system clock (SYSCLK).
+ * This parameter can be one of the following values:
+ * @arg RCC_SYSCLK_Div1: AHB clock = SYSCLK
+ * @arg RCC_SYSCLK_Div2: AHB clock = SYSCLK/2
+ * @arg RCC_SYSCLK_Div4: AHB clock = SYSCLK/4
+ * @arg RCC_SYSCLK_Div8: AHB clock = SYSCLK/8
+ * @arg RCC_SYSCLK_Div16: AHB clock = SYSCLK/16
+ * @arg RCC_SYSCLK_Div64: AHB clock = SYSCLK/64
+ * @arg RCC_SYSCLK_Div128: AHB clock = SYSCLK/128
+ * @arg RCC_SYSCLK_Div256: AHB clock = SYSCLK/256
+ * @arg RCC_SYSCLK_Div512: AHB clock = SYSCLK/512
+ * @retval None
+ */
+void RCC_HCLKConfig(uint32_t RCC_SYSCLK)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_RCC_HCLK(RCC_SYSCLK));
+ tmpreg = RCC->CFGR;
+ /* Clear HPRE[3:0] bits */
+ tmpreg &= CFGR_HPRE_Reset_Mask;
+ /* Set HPRE[3:0] bits according to RCC_SYSCLK value */
+ tmpreg |= RCC_SYSCLK;
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @brief Configures the Low Speed APB clock (PCLK1).
+ * @param RCC_HCLK: defines the APB1 clock divider. This clock is derived from
+ * the AHB clock (HCLK).
+ * This parameter can be one of the following values:
+ * @arg RCC_HCLK_Div1: APB1 clock = HCLK
+ * @arg RCC_HCLK_Div2: APB1 clock = HCLK/2
+ * @arg RCC_HCLK_Div4: APB1 clock = HCLK/4
+ * @arg RCC_HCLK_Div8: APB1 clock = HCLK/8
+ * @arg RCC_HCLK_Div16: APB1 clock = HCLK/16
+ * @retval None
+ */
+void RCC_PCLK1Config(uint32_t RCC_HCLK)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_RCC_PCLK(RCC_HCLK));
+ tmpreg = RCC->CFGR;
+ /* Clear PPRE1[2:0] bits */
+ tmpreg &= CFGR_PPRE1_Reset_Mask;
+ /* Set PPRE1[2:0] bits according to RCC_HCLK value */
+ tmpreg |= RCC_HCLK;
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @brief Configures the High Speed APB clock (PCLK2).
+ * @param RCC_HCLK: defines the APB2 clock divider. This clock is derived from
+ * the AHB clock (HCLK).
+ * This parameter can be one of the following values:
+ * @arg RCC_HCLK_Div1: APB2 clock = HCLK
+ * @arg RCC_HCLK_Div2: APB2 clock = HCLK/2
+ * @arg RCC_HCLK_Div4: APB2 clock = HCLK/4
+ * @arg RCC_HCLK_Div8: APB2 clock = HCLK/8
+ * @arg RCC_HCLK_Div16: APB2 clock = HCLK/16
+ * @retval None
+ */
+void RCC_PCLK2Config(uint32_t RCC_HCLK)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_RCC_PCLK(RCC_HCLK));
+ tmpreg = RCC->CFGR;
+ /* Clear PPRE2[2:0] bits */
+ tmpreg &= CFGR_PPRE2_Reset_Mask;
+ /* Set PPRE2[2:0] bits according to RCC_HCLK value */
+ tmpreg |= RCC_HCLK << 3;
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the specified RCC interrupts.
+ * @param RCC_IT: specifies the RCC interrupt sources to be enabled or disabled.
+ *
+ * For @b STM32_Connectivity_line_devices, this parameter can be any combination
+ * of the following values
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt
+ * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt
+ * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt
+ *
+ * For @b other_STM32_devices, this parameter can be any combination of the
+ * following values
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt
+ *
+ * @param NewState: new state of the specified RCC interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_IT(RCC_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Perform Byte access to RCC_CIR bits to enable the selected interrupts */
+ *(__IO uint8_t *) CIR_BYTE2_ADDRESS |= RCC_IT;
+ }
+ else
+ {
+ /* Perform Byte access to RCC_CIR bits to disable the selected interrupts */
+ *(__IO uint8_t *) CIR_BYTE2_ADDRESS &= (uint8_t)~RCC_IT;
+ }
+}
+
+#ifndef STM32F10X_CL
+/**
+ * @brief Configures the USB clock (USBCLK).
+ * @param RCC_USBCLKSource: specifies the USB clock source. This clock is
+ * derived from the PLL output.
+ * This parameter can be one of the following values:
+ * @arg RCC_USBCLKSource_PLLCLK_1Div5: PLL clock divided by 1,5 selected as USB
+ * clock source
+ * @arg RCC_USBCLKSource_PLLCLK_Div1: PLL clock selected as USB clock source
+ * @retval None
+ */
+void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_USBCLK_SOURCE(RCC_USBCLKSource));
+
+ *(__IO uint32_t *) CFGR_USBPRE_BB = RCC_USBCLKSource;
+}
+#else
+/**
+ * @brief Configures the USB OTG FS clock (OTGFSCLK).
+ * This function applies only to STM32 Connectivity line devices.
+ * @param RCC_OTGFSCLKSource: specifies the USB OTG FS clock source.
+ * This clock is derived from the PLL output.
+ * This parameter can be one of the following values:
+ * @arg RCC_OTGFSCLKSource_PLLVCO_Div3: PLL VCO clock divided by 2 selected as USB OTG FS clock source
+ * @arg RCC_OTGFSCLKSource_PLLVCO_Div2: PLL VCO clock divided by 2 selected as USB OTG FS clock source
+ * @retval None
+ */
+void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_OTGFSCLK_SOURCE(RCC_OTGFSCLKSource));
+
+ *(__IO uint32_t *) CFGR_OTGFSPRE_BB = RCC_OTGFSCLKSource;
+}
+#endif /* STM32F10X_CL */
+
+/**
+ * @brief Configures the ADC clock (ADCCLK).
+ * @param RCC_PCLK2: defines the ADC clock divider. This clock is derived from
+ * the APB2 clock (PCLK2).
+ * This parameter can be one of the following values:
+ * @arg RCC_PCLK2_Div2: ADC clock = PCLK2/2
+ * @arg RCC_PCLK2_Div4: ADC clock = PCLK2/4
+ * @arg RCC_PCLK2_Div6: ADC clock = PCLK2/6
+ * @arg RCC_PCLK2_Div8: ADC clock = PCLK2/8
+ * @retval None
+ */
+void RCC_ADCCLKConfig(uint32_t RCC_PCLK2)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_RCC_ADCCLK(RCC_PCLK2));
+ tmpreg = RCC->CFGR;
+ /* Clear ADCPRE[1:0] bits */
+ tmpreg &= CFGR_ADCPRE_Reset_Mask;
+ /* Set ADCPRE[1:0] bits according to RCC_PCLK2 value */
+ tmpreg |= RCC_PCLK2;
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+#ifdef STM32F10X_CL
+/**
+ * @brief Configures the I2S2 clock source(I2S2CLK).
+ * @note
+ * - This function must be called before enabling I2S2 APB clock.
+ * - This function applies only to STM32 Connectivity line devices.
+ * @param RCC_I2S2CLKSource: specifies the I2S2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2S2CLKSource_SYSCLK: system clock selected as I2S2 clock entry
+ * @arg RCC_I2S2CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S2 clock entry
+ * @retval None
+ */
+void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_I2S2CLK_SOURCE(RCC_I2S2CLKSource));
+
+ *(__IO uint32_t *) CFGR2_I2S2SRC_BB = RCC_I2S2CLKSource;
+}
+
+/**
+ * @brief Configures the I2S3 clock source(I2S2CLK).
+ * @note
+ * - This function must be called before enabling I2S3 APB clock.
+ * - This function applies only to STM32 Connectivity line devices.
+ * @param RCC_I2S3CLKSource: specifies the I2S3 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2S3CLKSource_SYSCLK: system clock selected as I2S3 clock entry
+ * @arg RCC_I2S3CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S3 clock entry
+ * @retval None
+ */
+void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_I2S3CLK_SOURCE(RCC_I2S3CLKSource));
+
+ *(__IO uint32_t *) CFGR2_I2S3SRC_BB = RCC_I2S3CLKSource;
+}
+#endif /* STM32F10X_CL */
+
+/**
+ * @brief Configures the External Low Speed oscillator (LSE).
+ * @param RCC_LSE: specifies the new state of the LSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_LSE_OFF: LSE oscillator OFF
+ * @arg RCC_LSE_ON: LSE oscillator ON
+ * @arg RCC_LSE_Bypass: LSE oscillator bypassed with external clock
+ * @retval None
+ */
+void RCC_LSEConfig(uint8_t RCC_LSE)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_LSE(RCC_LSE));
+ /* Reset LSEON and LSEBYP bits before configuring the LSE ------------------*/
+ /* Reset LSEON bit */
+ *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF;
+ /* Reset LSEBYP bit */
+ *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF;
+ /* Configure LSE (RCC_LSE_OFF is already covered by the code section above) */
+ switch(RCC_LSE)
+ {
+ case RCC_LSE_ON:
+ /* Set LSEON bit */
+ *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_ON;
+ break;
+
+ case RCC_LSE_Bypass:
+ /* Set LSEBYP and LSEON bits */
+ *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_Bypass | RCC_LSE_ON;
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief Enables or disables the Internal Low Speed oscillator (LSI).
+ * @note LSI can not be disabled if the IWDG is running.
+ * @param NewState: new state of the LSI. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_LSICmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CSR_LSION_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Configures the RTC clock (RTCCLK).
+ * @note Once the RTC clock is selected it can't be changed unless the Backup domain is reset.
+ * @param RCC_RTCCLKSource: specifies the RTC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_RTCCLKSource_LSE: LSE selected as RTC clock
+ * @arg RCC_RTCCLKSource_LSI: LSI selected as RTC clock
+ * @arg RCC_RTCCLKSource_HSE_Div128: HSE clock divided by 128 selected as RTC clock
+ * @retval None
+ */
+void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_RTCCLK_SOURCE(RCC_RTCCLKSource));
+ /* Select the RTC clock source */
+ RCC->BDCR |= RCC_RTCCLKSource;
+}
+
+/**
+ * @brief Enables or disables the RTC clock.
+ * @note This function must be used only after the RTC clock was selected using the RCC_RTCCLKConfig function.
+ * @param NewState: new state of the RTC clock. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_RTCCLKCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) BDCR_RTCEN_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Returns the frequencies of different on chip clocks.
+ * @param RCC_Clocks: pointer to a RCC_ClocksTypeDef structure which will hold
+ * the clocks frequencies.
+ * @note The result of this function could be not correct when using
+ * fractional value for HSE crystal.
+ * @retval None
+ */
+void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks)
+{
+ uint32_t tmp = 0, pllmull = 0, pllsource = 0, presc = 0;
+
+#ifdef STM32F10X_CL
+ uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
+#endif /* STM32F10X_CL */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+ uint32_t prediv1factor = 0;
+#endif
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & CFGR_SWS_Mask;
+
+ switch (tmp)
+ {
+ case 0x00: /* HSI used as system clock */
+ RCC_Clocks->SYSCLK_Frequency = HSI_VALUE;
+ break;
+ case 0x04: /* HSE used as system clock */
+ RCC_Clocks->SYSCLK_Frequency = HSE_VALUE;
+ break;
+ case 0x08: /* PLL used as system clock */
+
+ /* Get PLL clock source and multiplication factor ----------------------*/
+ pllmull = RCC->CFGR & CFGR_PLLMull_Mask;
+ pllsource = RCC->CFGR & CFGR_PLLSRC_Mask;
+
+#ifndef STM32F10X_CL
+ pllmull = ( pllmull >> 18) + 2;
+
+ if (pllsource == 0x00)
+ {/* HSI oscillator clock divided by 2 selected as PLL clock entry */
+ RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull;
+ }
+ else
+ {
+ #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+ prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1;
+ /* HSE oscillator clock selected as PREDIV1 clock entry */
+ RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull;
+ #else
+ /* HSE selected as PLL clock entry */
+ if ((RCC->CFGR & CFGR_PLLXTPRE_Mask) != (uint32_t)RESET)
+ {/* HSE oscillator clock divided by 2 */
+ RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE >> 1) * pllmull;
+ }
+ else
+ {
+ RCC_Clocks->SYSCLK_Frequency = HSE_VALUE * pllmull;
+ }
+ #endif
+ }
+#else
+ pllmull = pllmull >> 18;
+
+ if (pllmull != 0x0D)
+ {
+ pllmull += 2;
+ }
+ else
+ { /* PLL multiplication factor = PLL input clock * 6.5 */
+ pllmull = 13 / 2;
+ }
+
+ if (pllsource == 0x00)
+ {/* HSI oscillator clock divided by 2 selected as PLL clock entry */
+ RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull;
+ }
+ else
+ {/* PREDIV1 selected as PLL clock entry */
+
+ /* Get PREDIV1 clock source and division factor */
+ prediv1source = RCC->CFGR2 & CFGR2_PREDIV1SRC;
+ prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1;
+
+ if (prediv1source == 0)
+ { /* HSE oscillator clock selected as PREDIV1 clock entry */
+ RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull;
+ }
+ else
+ {/* PLL2 clock selected as PREDIV1 clock entry */
+
+ /* Get PREDIV2 division factor and PLL2 multiplication factor */
+ prediv2factor = ((RCC->CFGR2 & CFGR2_PREDIV2) >> 4) + 1;
+ pll2mull = ((RCC->CFGR2 & CFGR2_PLL2MUL) >> 8 ) + 2;
+ RCC_Clocks->SYSCLK_Frequency = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;
+ }
+ }
+#endif /* STM32F10X_CL */
+ break;
+
+ default:
+ RCC_Clocks->SYSCLK_Frequency = HSI_VALUE;
+ break;
+ }
+
+ /* Compute HCLK, PCLK1, PCLK2 and ADCCLK clocks frequencies ----------------*/
+ /* Get HCLK prescaler */
+ tmp = RCC->CFGR & CFGR_HPRE_Set_Mask;
+ tmp = tmp >> 4;
+ presc = APBAHBPrescTable[tmp];
+ /* HCLK clock frequency */
+ RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc;
+ /* Get PCLK1 prescaler */
+ tmp = RCC->CFGR & CFGR_PPRE1_Set_Mask;
+ tmp = tmp >> 8;
+ presc = APBAHBPrescTable[tmp];
+ /* PCLK1 clock frequency */
+ RCC_Clocks->PCLK1_Frequency = RCC_Clocks->HCLK_Frequency >> presc;
+ /* Get PCLK2 prescaler */
+ tmp = RCC->CFGR & CFGR_PPRE2_Set_Mask;
+ tmp = tmp >> 11;
+ presc = APBAHBPrescTable[tmp];
+ /* PCLK2 clock frequency */
+ RCC_Clocks->PCLK2_Frequency = RCC_Clocks->HCLK_Frequency >> presc;
+ /* Get ADCCLK prescaler */
+ tmp = RCC->CFGR & CFGR_ADCPRE_Set_Mask;
+ tmp = tmp >> 14;
+ presc = ADCPrescTable[tmp];
+ /* ADCCLK clock frequency */
+ RCC_Clocks->ADCCLK_Frequency = RCC_Clocks->PCLK2_Frequency / presc;
+}
+
+/**
+ * @brief Enables or disables the AHB peripheral clock.
+ * @param RCC_AHBPeriph: specifies the AHB peripheral to gates its clock.
+ *
+ * For @b STM32_Connectivity_line_devices, this parameter can be any combination
+ * of the following values:
+ * @arg RCC_AHBPeriph_DMA1
+ * @arg RCC_AHBPeriph_DMA2
+ * @arg RCC_AHBPeriph_SRAM
+ * @arg RCC_AHBPeriph_FLITF
+ * @arg RCC_AHBPeriph_CRC
+ * @arg RCC_AHBPeriph_OTG_FS
+ * @arg RCC_AHBPeriph_ETH_MAC
+ * @arg RCC_AHBPeriph_ETH_MAC_Tx
+ * @arg RCC_AHBPeriph_ETH_MAC_Rx
+ *
+ * For @b other_STM32_devices, this parameter can be any combination of the
+ * following values:
+ * @arg RCC_AHBPeriph_DMA1
+ * @arg RCC_AHBPeriph_DMA2
+ * @arg RCC_AHBPeriph_SRAM
+ * @arg RCC_AHBPeriph_FLITF
+ * @arg RCC_AHBPeriph_CRC
+ * @arg RCC_AHBPeriph_FSMC
+ * @arg RCC_AHBPeriph_SDIO
+ *
+ * @note SRAM and FLITF clock can be disabled only during sleep mode.
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_AHB_PERIPH(RCC_AHBPeriph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ RCC->AHBENR |= RCC_AHBPeriph;
+ }
+ else
+ {
+ RCC->AHBENR &= ~RCC_AHBPeriph;
+ }
+}
+
+/**
+ * @brief Enables or disables the High Speed APB (APB2) peripheral clock.
+ * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB,
+ * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE,
+ * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1,
+ * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1,
+ * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3,
+ * RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17,
+ * RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->APB2ENR |= RCC_APB2Periph;
+ }
+ else
+ {
+ RCC->APB2ENR &= ~RCC_APB2Periph;
+ }
+}
+
+/**
+ * @brief Enables or disables the Low Speed APB (APB1) peripheral clock.
+ * @param RCC_APB1Periph: specifies the APB1 peripheral to gates its clock.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4,
+ * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7,
+ * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3,
+ * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4,
+ * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2,
+ * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP,
+ * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC,
+ * RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->APB1ENR |= RCC_APB1Periph;
+ }
+ else
+ {
+ RCC->APB1ENR &= ~RCC_APB1Periph;
+ }
+}
+
+#ifdef STM32F10X_CL
+/**
+ * @brief Forces or releases AHB peripheral reset.
+ * @note This function applies only to STM32 Connectivity line devices.
+ * @param RCC_AHBPeriph: specifies the AHB peripheral to reset.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_AHBPeriph_OTG_FS
+ * @arg RCC_AHBPeriph_ETH_MAC
+ * @param NewState: new state of the specified peripheral reset.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_AHB_PERIPH_RESET(RCC_AHBPeriph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ RCC->AHBRSTR |= RCC_AHBPeriph;
+ }
+ else
+ {
+ RCC->AHBRSTR &= ~RCC_AHBPeriph;
+ }
+}
+#endif /* STM32F10X_CL */
+
+/**
+ * @brief Forces or releases High Speed APB (APB2) peripheral reset.
+ * @param RCC_APB2Periph: specifies the APB2 peripheral to reset.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB,
+ * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE,
+ * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1,
+ * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1,
+ * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3,
+ * RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17,
+ * RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11
+ * @param NewState: new state of the specified peripheral reset.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->APB2RSTR |= RCC_APB2Periph;
+ }
+ else
+ {
+ RCC->APB2RSTR &= ~RCC_APB2Periph;
+ }
+}
+
+/**
+ * @brief Forces or releases Low Speed APB (APB1) peripheral reset.
+ * @param RCC_APB1Periph: specifies the APB1 peripheral to reset.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4,
+ * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7,
+ * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3,
+ * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4,
+ * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2,
+ * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP,
+ * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC,
+ * RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->APB1RSTR |= RCC_APB1Periph;
+ }
+ else
+ {
+ RCC->APB1RSTR &= ~RCC_APB1Periph;
+ }
+}
+
+/**
+ * @brief Forces or releases the Backup domain reset.
+ * @param NewState: new state of the Backup domain reset.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_BackupResetCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) BDCR_BDRST_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enables or disables the Clock Security System.
+ * @param NewState: new state of the Clock Security System..
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_ClockSecuritySystemCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_CSSON_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Selects the clock source to output on MCO pin.
+ * @param RCC_MCO: specifies the clock source to output.
+ *
+ * For @b STM32_Connectivity_line_devices, this parameter can be one of the
+ * following values:
+ * @arg RCC_MCO_NoClock: No clock selected
+ * @arg RCC_MCO_SYSCLK: System clock selected
+ * @arg RCC_MCO_HSI: HSI oscillator clock selected
+ * @arg RCC_MCO_HSE: HSE oscillator clock selected
+ * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected
+ * @arg RCC_MCO_PLL2CLK: PLL2 clock selected
+ * @arg RCC_MCO_PLL3CLK_Div2: PLL3 clock divided by 2 selected
+ * @arg RCC_MCO_XT1: External 3-25 MHz oscillator clock selected
+ * @arg RCC_MCO_PLL3CLK: PLL3 clock selected
+ *
+ * For @b other_STM32_devices, this parameter can be one of the following values:
+ * @arg RCC_MCO_NoClock: No clock selected
+ * @arg RCC_MCO_SYSCLK: System clock selected
+ * @arg RCC_MCO_HSI: HSI oscillator clock selected
+ * @arg RCC_MCO_HSE: HSE oscillator clock selected
+ * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected
+ *
+ * @retval None
+ */
+void RCC_MCOConfig(uint8_t RCC_MCO)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_MCO(RCC_MCO));
+
+ /* Perform Byte access to MCO bits to select the MCO source */
+ *(__IO uint8_t *) CFGR_BYTE4_ADDRESS = RCC_MCO;
+}
+
+/**
+ * @brief Checks whether the specified RCC flag is set or not.
+ * @param RCC_FLAG: specifies the flag to check.
+ *
+ * For @b STM32_Connectivity_line_devices, this parameter can be one of the
+ * following values:
+ * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready
+ * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready
+ * @arg RCC_FLAG_PLLRDY: PLL clock ready
+ * @arg RCC_FLAG_PLL2RDY: PLL2 clock ready
+ * @arg RCC_FLAG_PLL3RDY: PLL3 clock ready
+ * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready
+ * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready
+ * @arg RCC_FLAG_PINRST: Pin reset
+ * @arg RCC_FLAG_PORRST: POR/PDR reset
+ * @arg RCC_FLAG_SFTRST: Software reset
+ * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset
+ * @arg RCC_FLAG_WWDGRST: Window Watchdog reset
+ * @arg RCC_FLAG_LPWRRST: Low Power reset
+ *
+ * For @b other_STM32_devices, this parameter can be one of the following values:
+ * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready
+ * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready
+ * @arg RCC_FLAG_PLLRDY: PLL clock ready
+ * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready
+ * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready
+ * @arg RCC_FLAG_PINRST: Pin reset
+ * @arg RCC_FLAG_PORRST: POR/PDR reset
+ * @arg RCC_FLAG_SFTRST: Software reset
+ * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset
+ * @arg RCC_FLAG_WWDGRST: Window Watchdog reset
+ * @arg RCC_FLAG_LPWRRST: Low Power reset
+ *
+ * @retval The new state of RCC_FLAG (SET or RESET).
+ */
+FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG)
+{
+ uint32_t tmp = 0;
+ uint32_t statusreg = 0;
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_RCC_FLAG(RCC_FLAG));
+
+ /* Get the RCC register index */
+ tmp = RCC_FLAG >> 5;
+ if (tmp == 1) /* The flag to check is in CR register */
+ {
+ statusreg = RCC->CR;
+ }
+ else if (tmp == 2) /* The flag to check is in BDCR register */
+ {
+ statusreg = RCC->BDCR;
+ }
+ else /* The flag to check is in CSR register */
+ {
+ statusreg = RCC->CSR;
+ }
+
+ /* Get the flag position */
+ tmp = RCC_FLAG & FLAG_Mask;
+ if ((statusreg & ((uint32_t)1 << tmp)) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+
+ /* Return the flag status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the RCC reset flags.
+ * @note The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST,
+ * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST
+ * @param None
+ * @retval None
+ */
+void RCC_ClearFlag(void)
+{
+ /* Set RMVF bit to clear the reset flags */
+ RCC->CSR |= CSR_RMVF_Set;
+}
+
+/**
+ * @brief Checks whether the specified RCC interrupt has occurred or not.
+ * @param RCC_IT: specifies the RCC interrupt source to check.
+ *
+ * For @b STM32_Connectivity_line_devices, this parameter can be one of the
+ * following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt
+ * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt
+ * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ *
+ * For @b other_STM32_devices, this parameter can be one of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ *
+ * @retval The new state of RCC_IT (SET or RESET).
+ */
+ITStatus RCC_GetITStatus(uint8_t RCC_IT)
+{
+ ITStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_RCC_GET_IT(RCC_IT));
+
+ /* Check the status of the specified RCC interrupt */
+ if ((RCC->CIR & RCC_IT) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+
+ /* Return the RCC_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the RCC's interrupt pending bits.
+ * @param RCC_IT: specifies the interrupt pending bit to clear.
+ *
+ * For @b STM32_Connectivity_line_devices, this parameter can be any combination
+ * of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt
+ * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt
+ * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ *
+ * For @b other_STM32_devices, this parameter can be any combination of the
+ * following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt
+ *
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ * @retval None
+ */
+void RCC_ClearITPendingBit(uint8_t RCC_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_CLEAR_IT(RCC_IT));
+
+ /* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt
+ pending bits */
+ *(__IO uint8_t *) CIR_BYTE3_ADDRESS = RCC_IT;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_rtc.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_rtc.c
new file mode 100644
index 00000000..f798d2bd
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_rtc.c
@@ -0,0 +1,339 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_rtc.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the RTC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_rtc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup RTC
+ * @brief RTC driver modules
+ * @{
+ */
+
+/** @defgroup RTC_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Private_Defines
+ * @{
+ */
+#define RTC_LSB_MASK ((uint32_t)0x0000FFFF) /*!< RTC LSB Mask */
+#define PRLH_MSB_MASK ((uint32_t)0x000F0000) /*!< RTC Prescaler MSB Mask */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Enables or disables the specified RTC interrupts.
+ * @param RTC_IT: specifies the RTC interrupts sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_OW: Overflow interrupt
+ * @arg RTC_IT_ALR: Alarm interrupt
+ * @arg RTC_IT_SEC: Second interrupt
+ * @param NewState: new state of the specified RTC interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RTC_IT(RTC_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ RTC->CRH |= RTC_IT;
+ }
+ else
+ {
+ RTC->CRH &= (uint16_t)~RTC_IT;
+ }
+}
+
+/**
+ * @brief Enters the RTC configuration mode.
+ * @param None
+ * @retval None
+ */
+void RTC_EnterConfigMode(void)
+{
+ /* Set the CNF flag to enter in the Configuration Mode */
+ RTC->CRL |= RTC_CRL_CNF;
+}
+
+/**
+ * @brief Exits from the RTC configuration mode.
+ * @param None
+ * @retval None
+ */
+void RTC_ExitConfigMode(void)
+{
+ /* Reset the CNF flag to exit from the Configuration Mode */
+ RTC->CRL &= (uint16_t)~((uint16_t)RTC_CRL_CNF);
+}
+
+/**
+ * @brief Gets the RTC counter value.
+ * @param None
+ * @retval RTC counter value.
+ */
+uint32_t RTC_GetCounter(void)
+{
+ uint16_t tmp = 0;
+ tmp = RTC->CNTL;
+ return (((uint32_t)RTC->CNTH << 16 ) | tmp) ;
+}
+
+/**
+ * @brief Sets the RTC counter value.
+ * @param CounterValue: RTC counter new value.
+ * @retval None
+ */
+void RTC_SetCounter(uint32_t CounterValue)
+{
+ RTC_EnterConfigMode();
+ /* Set RTC COUNTER MSB word */
+ RTC->CNTH = CounterValue >> 16;
+ /* Set RTC COUNTER LSB word */
+ RTC->CNTL = (CounterValue & RTC_LSB_MASK);
+ RTC_ExitConfigMode();
+}
+
+/**
+ * @brief Sets the RTC prescaler value.
+ * @param PrescalerValue: RTC prescaler new value.
+ * @retval None
+ */
+void RTC_SetPrescaler(uint32_t PrescalerValue)
+{
+ /* Check the parameters */
+ assert_param(IS_RTC_PRESCALER(PrescalerValue));
+
+ RTC_EnterConfigMode();
+ /* Set RTC PRESCALER MSB word */
+ RTC->PRLH = (PrescalerValue & PRLH_MSB_MASK) >> 16;
+ /* Set RTC PRESCALER LSB word */
+ RTC->PRLL = (PrescalerValue & RTC_LSB_MASK);
+ RTC_ExitConfigMode();
+}
+
+/**
+ * @brief Sets the RTC alarm value.
+ * @param AlarmValue: RTC alarm new value.
+ * @retval None
+ */
+void RTC_SetAlarm(uint32_t AlarmValue)
+{
+ RTC_EnterConfigMode();
+ /* Set the ALARM MSB word */
+ RTC->ALRH = AlarmValue >> 16;
+ /* Set the ALARM LSB word */
+ RTC->ALRL = (AlarmValue & RTC_LSB_MASK);
+ RTC_ExitConfigMode();
+}
+
+/**
+ * @brief Gets the RTC divider value.
+ * @param None
+ * @retval RTC Divider value.
+ */
+uint32_t RTC_GetDivider(void)
+{
+ uint32_t tmp = 0x00;
+ tmp = ((uint32_t)RTC->DIVH & (uint32_t)0x000F) << 16;
+ tmp |= RTC->DIVL;
+ return tmp;
+}
+
+/**
+ * @brief Waits until last write operation on RTC registers has finished.
+ * @note This function must be called before any write to RTC registers.
+ * @param None
+ * @retval None
+ */
+void RTC_WaitForLastTask(void)
+{
+ /* Loop until RTOFF flag is set */
+ while ((RTC->CRL & RTC_FLAG_RTOFF) == (uint16_t)RESET)
+ {
+ }
+}
+
+/**
+ * @brief Waits until the RTC registers (RTC_CNT, RTC_ALR and RTC_PRL)
+ * are synchronized with RTC APB clock.
+ * @note This function must be called before any read operation after an APB reset
+ * or an APB clock stop.
+ * @param None
+ * @retval None
+ */
+void RTC_WaitForSynchro(void)
+{
+ /* Clear RSF flag */
+ RTC->CRL &= (uint16_t)~RTC_FLAG_RSF;
+ /* Loop until RSF flag is set */
+ while ((RTC->CRL & RTC_FLAG_RSF) == (uint16_t)RESET)
+ {
+ }
+}
+
+/**
+ * @brief Checks whether the specified RTC flag is set or not.
+ * @param RTC_FLAG: specifies the flag to check.
+ * This parameter can be one the following values:
+ * @arg RTC_FLAG_RTOFF: RTC Operation OFF flag
+ * @arg RTC_FLAG_RSF: Registers Synchronized flag
+ * @arg RTC_FLAG_OW: Overflow flag
+ * @arg RTC_FLAG_ALR: Alarm flag
+ * @arg RTC_FLAG_SEC: Second flag
+ * @retval The new state of RTC_FLAG (SET or RESET).
+ */
+FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_GET_FLAG(RTC_FLAG));
+
+ if ((RTC->CRL & RTC_FLAG) != (uint16_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the RTC's pending flags.
+ * @param RTC_FLAG: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_FLAG_RSF: Registers Synchronized flag. This flag is cleared only after
+ * an APB reset or an APB Clock stop.
+ * @arg RTC_FLAG_OW: Overflow flag
+ * @arg RTC_FLAG_ALR: Alarm flag
+ * @arg RTC_FLAG_SEC: Second flag
+ * @retval None
+ */
+void RTC_ClearFlag(uint16_t RTC_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_RTC_CLEAR_FLAG(RTC_FLAG));
+
+ /* Clear the corresponding RTC flag */
+ RTC->CRL &= (uint16_t)~RTC_FLAG;
+}
+
+/**
+ * @brief Checks whether the specified RTC interrupt has occurred or not.
+ * @param RTC_IT: specifies the RTC interrupts sources to check.
+ * This parameter can be one of the following values:
+ * @arg RTC_IT_OW: Overflow interrupt
+ * @arg RTC_IT_ALR: Alarm interrupt
+ * @arg RTC_IT_SEC: Second interrupt
+ * @retval The new state of the RTC_IT (SET or RESET).
+ */
+ITStatus RTC_GetITStatus(uint16_t RTC_IT)
+{
+ ITStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_RTC_GET_IT(RTC_IT));
+
+ bitstatus = (ITStatus)(RTC->CRL & RTC_IT);
+ if (((RTC->CRH & RTC_IT) != (uint16_t)RESET) && (bitstatus != (uint16_t)RESET))
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the RTC's interrupt pending bits.
+ * @param RTC_IT: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_OW: Overflow interrupt
+ * @arg RTC_IT_ALR: Alarm interrupt
+ * @arg RTC_IT_SEC: Second interrupt
+ * @retval None
+ */
+void RTC_ClearITPendingBit(uint16_t RTC_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_RTC_IT(RTC_IT));
+
+ /* Clear the corresponding RTC pending bit */
+ RTC->CRL &= (uint16_t)~RTC_IT;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_sdio.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_sdio.c
new file mode 100644
index 00000000..d1870cef
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_sdio.c
@@ -0,0 +1,799 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_sdio.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the SDIO firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_sdio.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup SDIO
+ * @brief SDIO driver modules
+ * @{
+ */
+
+/** @defgroup SDIO_Private_TypesDefinitions
+ * @{
+ */
+
+/* ------------ SDIO registers bit address in the alias region ----------- */
+#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE)
+
+/* --- CLKCR Register ---*/
+
+/* Alias word address of CLKEN bit */
+#define CLKCR_OFFSET (SDIO_OFFSET + 0x04)
+#define CLKEN_BitNumber 0x08
+#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BitNumber * 4))
+
+/* --- CMD Register ---*/
+
+/* Alias word address of SDIOSUSPEND bit */
+#define CMD_OFFSET (SDIO_OFFSET + 0x0C)
+#define SDIOSUSPEND_BitNumber 0x0B
+#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BitNumber * 4))
+
+/* Alias word address of ENCMDCOMPL bit */
+#define ENCMDCOMPL_BitNumber 0x0C
+#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BitNumber * 4))
+
+/* Alias word address of NIEN bit */
+#define NIEN_BitNumber 0x0D
+#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BitNumber * 4))
+
+/* Alias word address of ATACMD bit */
+#define ATACMD_BitNumber 0x0E
+#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BitNumber * 4))
+
+/* --- DCTRL Register ---*/
+
+/* Alias word address of DMAEN bit */
+#define DCTRL_OFFSET (SDIO_OFFSET + 0x2C)
+#define DMAEN_BitNumber 0x03
+#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BitNumber * 4))
+
+/* Alias word address of RWSTART bit */
+#define RWSTART_BitNumber 0x08
+#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BitNumber * 4))
+
+/* Alias word address of RWSTOP bit */
+#define RWSTOP_BitNumber 0x09
+#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BitNumber * 4))
+
+/* Alias word address of RWMOD bit */
+#define RWMOD_BitNumber 0x0A
+#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BitNumber * 4))
+
+/* Alias word address of SDIOEN bit */
+#define SDIOEN_BitNumber 0x0B
+#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BitNumber * 4))
+
+/* ---------------------- SDIO registers bit mask ------------------------ */
+
+/* --- CLKCR Register ---*/
+
+/* CLKCR register clear mask */
+#define CLKCR_CLEAR_MASK ((uint32_t)0xFFFF8100)
+
+/* --- PWRCTRL Register ---*/
+
+/* SDIO PWRCTRL Mask */
+#define PWR_PWRCTRL_MASK ((uint32_t)0xFFFFFFFC)
+
+/* --- DCTRL Register ---*/
+
+/* SDIO DCTRL Clear Mask */
+#define DCTRL_CLEAR_MASK ((uint32_t)0xFFFFFF08)
+
+/* --- CMD Register ---*/
+
+/* CMD Register clear mask */
+#define CMD_CLEAR_MASK ((uint32_t)0xFFFFF800)
+
+/* SDIO RESP Registers Address */
+#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14))
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the SDIO peripheral registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void SDIO_DeInit(void)
+{
+ SDIO->POWER = 0x00000000;
+ SDIO->CLKCR = 0x00000000;
+ SDIO->ARG = 0x00000000;
+ SDIO->CMD = 0x00000000;
+ SDIO->DTIMER = 0x00000000;
+ SDIO->DLEN = 0x00000000;
+ SDIO->DCTRL = 0x00000000;
+ SDIO->ICR = 0x00C007FF;
+ SDIO->MASK = 0x00000000;
+}
+
+/**
+ * @brief Initializes the SDIO peripheral according to the specified
+ * parameters in the SDIO_InitStruct.
+ * @param SDIO_InitStruct : pointer to a SDIO_InitTypeDef structure
+ * that contains the configuration information for the SDIO peripheral.
+ * @retval None
+ */
+void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_CLOCK_EDGE(SDIO_InitStruct->SDIO_ClockEdge));
+ assert_param(IS_SDIO_CLOCK_BYPASS(SDIO_InitStruct->SDIO_ClockBypass));
+ assert_param(IS_SDIO_CLOCK_POWER_SAVE(SDIO_InitStruct->SDIO_ClockPowerSave));
+ assert_param(IS_SDIO_BUS_WIDE(SDIO_InitStruct->SDIO_BusWide));
+ assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(SDIO_InitStruct->SDIO_HardwareFlowControl));
+
+/*---------------------------- SDIO CLKCR Configuration ------------------------*/
+ /* Get the SDIO CLKCR value */
+ tmpreg = SDIO->CLKCR;
+
+ /* Clear CLKDIV, PWRSAV, BYPASS, WIDBUS, NEGEDGE, HWFC_EN bits */
+ tmpreg &= CLKCR_CLEAR_MASK;
+
+ /* Set CLKDIV bits according to SDIO_ClockDiv value */
+ /* Set PWRSAV bit according to SDIO_ClockPowerSave value */
+ /* Set BYPASS bit according to SDIO_ClockBypass value */
+ /* Set WIDBUS bits according to SDIO_BusWide value */
+ /* Set NEGEDGE bits according to SDIO_ClockEdge value */
+ /* Set HWFC_EN bits according to SDIO_HardwareFlowControl value */
+ tmpreg |= (SDIO_InitStruct->SDIO_ClockDiv | SDIO_InitStruct->SDIO_ClockPowerSave |
+ SDIO_InitStruct->SDIO_ClockBypass | SDIO_InitStruct->SDIO_BusWide |
+ SDIO_InitStruct->SDIO_ClockEdge | SDIO_InitStruct->SDIO_HardwareFlowControl);
+
+ /* Write to SDIO CLKCR */
+ SDIO->CLKCR = tmpreg;
+}
+
+/**
+ * @brief Fills each SDIO_InitStruct member with its default value.
+ * @param SDIO_InitStruct: pointer to an SDIO_InitTypeDef structure which
+ * will be initialized.
+ * @retval None
+ */
+void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct)
+{
+ /* SDIO_InitStruct members default value */
+ SDIO_InitStruct->SDIO_ClockDiv = 0x00;
+ SDIO_InitStruct->SDIO_ClockEdge = SDIO_ClockEdge_Rising;
+ SDIO_InitStruct->SDIO_ClockBypass = SDIO_ClockBypass_Disable;
+ SDIO_InitStruct->SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable;
+ SDIO_InitStruct->SDIO_BusWide = SDIO_BusWide_1b;
+ SDIO_InitStruct->SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable;
+}
+
+/**
+ * @brief Enables or disables the SDIO Clock.
+ * @param NewState: new state of the SDIO Clock. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_ClockCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CLKCR_CLKEN_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Sets the power status of the controller.
+ * @param SDIO_PowerState: new state of the Power state.
+ * This parameter can be one of the following values:
+ * @arg SDIO_PowerState_OFF
+ * @arg SDIO_PowerState_ON
+ * @retval None
+ */
+void SDIO_SetPowerState(uint32_t SDIO_PowerState)
+{
+ /* Check the parameters */
+ assert_param(IS_SDIO_POWER_STATE(SDIO_PowerState));
+
+ SDIO->POWER &= PWR_PWRCTRL_MASK;
+ SDIO->POWER |= SDIO_PowerState;
+}
+
+/**
+ * @brief Gets the power status of the controller.
+ * @param None
+ * @retval Power status of the controller. The returned value can
+ * be one of the following:
+ * - 0x00: Power OFF
+ * - 0x02: Power UP
+ * - 0x03: Power ON
+ */
+uint32_t SDIO_GetPowerState(void)
+{
+ return (SDIO->POWER & (~PWR_PWRCTRL_MASK));
+}
+
+/**
+ * @brief Enables or disables the SDIO interrupts.
+ * @param SDIO_IT: specifies the SDIO interrupt sources to be enabled or disabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @param NewState: new state of the specified SDIO interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_SDIO_IT(SDIO_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the SDIO interrupts */
+ SDIO->MASK |= SDIO_IT;
+ }
+ else
+ {
+ /* Disable the SDIO interrupts */
+ SDIO->MASK &= ~SDIO_IT;
+ }
+}
+
+/**
+ * @brief Enables or disables the SDIO DMA request.
+ * @param NewState: new state of the selected SDIO DMA request.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_DMACmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) DCTRL_DMAEN_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Initializes the SDIO Command according to the specified
+ * parameters in the SDIO_CmdInitStruct and send the command.
+ * @param SDIO_CmdInitStruct : pointer to a SDIO_CmdInitTypeDef
+ * structure that contains the configuration information for the SDIO command.
+ * @retval None
+ */
+void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->SDIO_CmdIndex));
+ assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->SDIO_Response));
+ assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->SDIO_Wait));
+ assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->SDIO_CPSM));
+
+/*---------------------------- SDIO ARG Configuration ------------------------*/
+ /* Set the SDIO Argument value */
+ SDIO->ARG = SDIO_CmdInitStruct->SDIO_Argument;
+
+/*---------------------------- SDIO CMD Configuration ------------------------*/
+ /* Get the SDIO CMD value */
+ tmpreg = SDIO->CMD;
+ /* Clear CMDINDEX, WAITRESP, WAITINT, WAITPEND, CPSMEN bits */
+ tmpreg &= CMD_CLEAR_MASK;
+ /* Set CMDINDEX bits according to SDIO_CmdIndex value */
+ /* Set WAITRESP bits according to SDIO_Response value */
+ /* Set WAITINT and WAITPEND bits according to SDIO_Wait value */
+ /* Set CPSMEN bits according to SDIO_CPSM value */
+ tmpreg |= (uint32_t)SDIO_CmdInitStruct->SDIO_CmdIndex | SDIO_CmdInitStruct->SDIO_Response
+ | SDIO_CmdInitStruct->SDIO_Wait | SDIO_CmdInitStruct->SDIO_CPSM;
+
+ /* Write to SDIO CMD */
+ SDIO->CMD = tmpreg;
+}
+
+/**
+ * @brief Fills each SDIO_CmdInitStruct member with its default value.
+ * @param SDIO_CmdInitStruct: pointer to an SDIO_CmdInitTypeDef
+ * structure which will be initialized.
+ * @retval None
+ */
+void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct)
+{
+ /* SDIO_CmdInitStruct members default value */
+ SDIO_CmdInitStruct->SDIO_Argument = 0x00;
+ SDIO_CmdInitStruct->SDIO_CmdIndex = 0x00;
+ SDIO_CmdInitStruct->SDIO_Response = SDIO_Response_No;
+ SDIO_CmdInitStruct->SDIO_Wait = SDIO_Wait_No;
+ SDIO_CmdInitStruct->SDIO_CPSM = SDIO_CPSM_Disable;
+}
+
+/**
+ * @brief Returns command index of last command for which response received.
+ * @param None
+ * @retval Returns the command index of the last command response received.
+ */
+uint8_t SDIO_GetCommandResponse(void)
+{
+ return (uint8_t)(SDIO->RESPCMD);
+}
+
+/**
+ * @brief Returns response received from the card for the last command.
+ * @param SDIO_RESP: Specifies the SDIO response register.
+ * This parameter can be one of the following values:
+ * @arg SDIO_RESP1: Response Register 1
+ * @arg SDIO_RESP2: Response Register 2
+ * @arg SDIO_RESP3: Response Register 3
+ * @arg SDIO_RESP4: Response Register 4
+ * @retval The Corresponding response register value.
+ */
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_RESP(SDIO_RESP));
+
+ tmp = SDIO_RESP_ADDR + SDIO_RESP;
+
+ return (*(__IO uint32_t *) tmp);
+}
+
+/**
+ * @brief Initializes the SDIO data path according to the specified
+ * parameters in the SDIO_DataInitStruct.
+ * @param SDIO_DataInitStruct : pointer to a SDIO_DataInitTypeDef structure that
+ * contains the configuration information for the SDIO command.
+ * @retval None
+ */
+void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_DATA_LENGTH(SDIO_DataInitStruct->SDIO_DataLength));
+ assert_param(IS_SDIO_BLOCK_SIZE(SDIO_DataInitStruct->SDIO_DataBlockSize));
+ assert_param(IS_SDIO_TRANSFER_DIR(SDIO_DataInitStruct->SDIO_TransferDir));
+ assert_param(IS_SDIO_TRANSFER_MODE(SDIO_DataInitStruct->SDIO_TransferMode));
+ assert_param(IS_SDIO_DPSM(SDIO_DataInitStruct->SDIO_DPSM));
+
+/*---------------------------- SDIO DTIMER Configuration ---------------------*/
+ /* Set the SDIO Data TimeOut value */
+ SDIO->DTIMER = SDIO_DataInitStruct->SDIO_DataTimeOut;
+
+/*---------------------------- SDIO DLEN Configuration -----------------------*/
+ /* Set the SDIO DataLength value */
+ SDIO->DLEN = SDIO_DataInitStruct->SDIO_DataLength;
+
+/*---------------------------- SDIO DCTRL Configuration ----------------------*/
+ /* Get the SDIO DCTRL value */
+ tmpreg = SDIO->DCTRL;
+ /* Clear DEN, DTMODE, DTDIR and DBCKSIZE bits */
+ tmpreg &= DCTRL_CLEAR_MASK;
+ /* Set DEN bit according to SDIO_DPSM value */
+ /* Set DTMODE bit according to SDIO_TransferMode value */
+ /* Set DTDIR bit according to SDIO_TransferDir value */
+ /* Set DBCKSIZE bits according to SDIO_DataBlockSize value */
+ tmpreg |= (uint32_t)SDIO_DataInitStruct->SDIO_DataBlockSize | SDIO_DataInitStruct->SDIO_TransferDir
+ | SDIO_DataInitStruct->SDIO_TransferMode | SDIO_DataInitStruct->SDIO_DPSM;
+
+ /* Write to SDIO DCTRL */
+ SDIO->DCTRL = tmpreg;
+}
+
+/**
+ * @brief Fills each SDIO_DataInitStruct member with its default value.
+ * @param SDIO_DataInitStruct: pointer to an SDIO_DataInitTypeDef structure which
+ * will be initialized.
+ * @retval None
+ */
+void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct)
+{
+ /* SDIO_DataInitStruct members default value */
+ SDIO_DataInitStruct->SDIO_DataTimeOut = 0xFFFFFFFF;
+ SDIO_DataInitStruct->SDIO_DataLength = 0x00;
+ SDIO_DataInitStruct->SDIO_DataBlockSize = SDIO_DataBlockSize_1b;
+ SDIO_DataInitStruct->SDIO_TransferDir = SDIO_TransferDir_ToCard;
+ SDIO_DataInitStruct->SDIO_TransferMode = SDIO_TransferMode_Block;
+ SDIO_DataInitStruct->SDIO_DPSM = SDIO_DPSM_Disable;
+}
+
+/**
+ * @brief Returns number of remaining data bytes to be transferred.
+ * @param None
+ * @retval Number of remaining data bytes to be transferred
+ */
+uint32_t SDIO_GetDataCounter(void)
+{
+ return SDIO->DCOUNT;
+}
+
+/**
+ * @brief Read one data word from Rx FIFO.
+ * @param None
+ * @retval Data received
+ */
+uint32_t SDIO_ReadData(void)
+{
+ return SDIO->FIFO;
+}
+
+/**
+ * @brief Write one data word to Tx FIFO.
+ * @param Data: 32-bit data word to write.
+ * @retval None
+ */
+void SDIO_WriteData(uint32_t Data)
+{
+ SDIO->FIFO = Data;
+}
+
+/**
+ * @brief Returns the number of words left to be written to or read from FIFO.
+ * @param None
+ * @retval Remaining number of words.
+ */
+uint32_t SDIO_GetFIFOCount(void)
+{
+ return SDIO->FIFOCNT;
+}
+
+/**
+ * @brief Starts the SD I/O Read Wait operation.
+ * @param NewState: new state of the Start SDIO Read Wait operation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_StartSDIOReadWait(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) DCTRL_RWSTART_BB = (uint32_t) NewState;
+}
+
+/**
+ * @brief Stops the SD I/O Read Wait operation.
+ * @param NewState: new state of the Stop SDIO Read Wait operation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_StopSDIOReadWait(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) DCTRL_RWSTOP_BB = (uint32_t) NewState;
+}
+
+/**
+ * @brief Sets one of the two options of inserting read wait interval.
+ * @param SDIO_ReadWaitMode: SD I/O Read Wait operation mode.
+ * This parameter can be:
+ * @arg SDIO_ReadWaitMode_CLK: Read Wait control by stopping SDIOCLK
+ * @arg SDIO_ReadWaitMode_DATA2: Read Wait control using SDIO_DATA2
+ * @retval None
+ */
+void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode)
+{
+ /* Check the parameters */
+ assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode));
+
+ *(__IO uint32_t *) DCTRL_RWMOD_BB = SDIO_ReadWaitMode;
+}
+
+/**
+ * @brief Enables or disables the SD I/O Mode Operation.
+ * @param NewState: new state of SDIO specific operation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_SetSDIOOperation(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) DCTRL_SDIOEN_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enables or disables the SD I/O Mode suspend command sending.
+ * @param NewState: new state of the SD I/O Mode suspend command.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_SendSDIOSuspendCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CMD_SDIOSUSPEND_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enables or disables the command completion signal.
+ * @param NewState: new state of command completion signal.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_CommandCompletionCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CMD_ENCMDCOMPL_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enables or disables the CE-ATA interrupt.
+ * @param NewState: new state of CE-ATA interrupt. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_CEATAITCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)((~((uint32_t)NewState)) & ((uint32_t)0x1));
+}
+
+/**
+ * @brief Sends CE-ATA command (CMD61).
+ * @param NewState: new state of CE-ATA command. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_SendCEATACmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CMD_ATACMD_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Checks whether the specified SDIO flag is set or not.
+ * @param SDIO_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode.
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_CMDACT: Command transfer in progress
+ * @arg SDIO_FLAG_TXACT: Data transmit in progress
+ * @arg SDIO_FLAG_RXACT: Data receive in progress
+ * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+ * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
+ * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
+ * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
+ * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
+ * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
+ * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
+ * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval The new state of SDIO_FLAG (SET or RESET).
+ */
+FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_FLAG(SDIO_FLAG));
+
+ if ((SDIO->STA & SDIO_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the SDIO's pending flags.
+ * @param SDIO_FLAG: specifies the flag to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+void SDIO_ClearFlag(uint32_t SDIO_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_SDIO_CLEAR_FLAG(SDIO_FLAG));
+
+ SDIO->ICR = SDIO_FLAG;
+}
+
+/**
+ * @brief Checks whether the specified SDIO interrupt has occurred or not.
+ * @param SDIO_IT: specifies the SDIO interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval The new state of SDIO_IT (SET or RESET).
+ */
+ITStatus SDIO_GetITStatus(uint32_t SDIO_IT)
+{
+ ITStatus bitstatus = RESET;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_GET_IT(SDIO_IT));
+ if ((SDIO->STA & SDIO_IT) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the SDIO's interrupt pending bits.
+ * @param SDIO_IT: specifies the interrupt pending bit to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+void SDIO_ClearITPendingBit(uint32_t SDIO_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_SDIO_CLEAR_IT(SDIO_IT));
+
+ SDIO->ICR = SDIO_IT;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_spi.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_spi.c
new file mode 100644
index 00000000..51a9cce7
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_spi.c
@@ -0,0 +1,908 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_spi.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the SPI firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_spi.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup SPI
+ * @brief SPI driver modules
+ * @{
+ */
+
+/** @defgroup SPI_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup SPI_Private_Defines
+ * @{
+ */
+
+/* SPI SPE mask */
+#define CR1_SPE_Set ((uint16_t)0x0040)
+#define CR1_SPE_Reset ((uint16_t)0xFFBF)
+
+/* I2S I2SE mask */
+#define I2SCFGR_I2SE_Set ((uint16_t)0x0400)
+#define I2SCFGR_I2SE_Reset ((uint16_t)0xFBFF)
+
+/* SPI CRCNext mask */
+#define CR1_CRCNext_Set ((uint16_t)0x1000)
+
+/* SPI CRCEN mask */
+#define CR1_CRCEN_Set ((uint16_t)0x2000)
+#define CR1_CRCEN_Reset ((uint16_t)0xDFFF)
+
+/* SPI SSOE mask */
+#define CR2_SSOE_Set ((uint16_t)0x0004)
+#define CR2_SSOE_Reset ((uint16_t)0xFFFB)
+
+/* SPI registers Masks */
+#define CR1_CLEAR_Mask ((uint16_t)0x3040)
+#define I2SCFGR_CLEAR_Mask ((uint16_t)0xF040)
+
+/* SPI or I2S mode selection masks */
+#define SPI_Mode_Select ((uint16_t)0xF7FF)
+#define I2S_Mode_Select ((uint16_t)0x0800)
+
+/* I2S clock source selection masks */
+#define I2S2_CLOCK_SRC ((uint32_t)(0x00020000))
+#define I2S3_CLOCK_SRC ((uint32_t)(0x00040000))
+#define I2S_MUL_MASK ((uint32_t)(0x0000F000))
+#define I2S_DIV_MASK ((uint32_t)(0x000000F0))
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the SPIx peripheral registers to their default
+ * reset values (Affects also the I2Ss).
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @retval None
+ */
+void SPI_I2S_DeInit(SPI_TypeDef* SPIx)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+
+ if (SPIx == SPI1)
+ {
+ /* Enable SPI1 reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, ENABLE);
+ /* Release SPI1 from reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, DISABLE);
+ }
+ else if (SPIx == SPI2)
+ {
+ /* Enable SPI2 reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, ENABLE);
+ /* Release SPI2 from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, DISABLE);
+ }
+ else
+ {
+ if (SPIx == SPI3)
+ {
+ /* Enable SPI3 reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE);
+ /* Release SPI3 from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, DISABLE);
+ }
+ }
+}
+
+/**
+ * @brief Initializes the SPIx peripheral according to the specified
+ * parameters in the SPI_InitStruct.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param SPI_InitStruct: pointer to a SPI_InitTypeDef structure that
+ * contains the configuration information for the specified SPI peripheral.
+ * @retval None
+ */
+void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct)
+{
+ uint16_t tmpreg = 0;
+
+ /* check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+
+ /* Check the SPI parameters */
+ assert_param(IS_SPI_DIRECTION_MODE(SPI_InitStruct->SPI_Direction));
+ assert_param(IS_SPI_MODE(SPI_InitStruct->SPI_Mode));
+ assert_param(IS_SPI_DATASIZE(SPI_InitStruct->SPI_DataSize));
+ assert_param(IS_SPI_CPOL(SPI_InitStruct->SPI_CPOL));
+ assert_param(IS_SPI_CPHA(SPI_InitStruct->SPI_CPHA));
+ assert_param(IS_SPI_NSS(SPI_InitStruct->SPI_NSS));
+ assert_param(IS_SPI_BAUDRATE_PRESCALER(SPI_InitStruct->SPI_BaudRatePrescaler));
+ assert_param(IS_SPI_FIRST_BIT(SPI_InitStruct->SPI_FirstBit));
+ assert_param(IS_SPI_CRC_POLYNOMIAL(SPI_InitStruct->SPI_CRCPolynomial));
+
+/*---------------------------- SPIx CR1 Configuration ------------------------*/
+ /* Get the SPIx CR1 value */
+ tmpreg = SPIx->CR1;
+ /* Clear BIDIMode, BIDIOE, RxONLY, SSM, SSI, LSBFirst, BR, MSTR, CPOL and CPHA bits */
+ tmpreg &= CR1_CLEAR_Mask;
+ /* Configure SPIx: direction, NSS management, first transmitted bit, BaudRate prescaler
+ master/salve mode, CPOL and CPHA */
+ /* Set BIDImode, BIDIOE and RxONLY bits according to SPI_Direction value */
+ /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */
+ /* Set LSBFirst bit according to SPI_FirstBit value */
+ /* Set BR bits according to SPI_BaudRatePrescaler value */
+ /* Set CPOL bit according to SPI_CPOL value */
+ /* Set CPHA bit according to SPI_CPHA value */
+ tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode |
+ SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL |
+ SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS |
+ SPI_InitStruct->SPI_BaudRatePrescaler | SPI_InitStruct->SPI_FirstBit);
+ /* Write to SPIx CR1 */
+ SPIx->CR1 = tmpreg;
+
+ /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */
+ SPIx->I2SCFGR &= SPI_Mode_Select;
+
+/*---------------------------- SPIx CRCPOLY Configuration --------------------*/
+ /* Write to SPIx CRCPOLY */
+ SPIx->CRCPR = SPI_InitStruct->SPI_CRCPolynomial;
+}
+
+/**
+ * @brief Initializes the SPIx peripheral according to the specified
+ * parameters in the I2S_InitStruct.
+ * @param SPIx: where x can be 2 or 3 to select the SPI peripheral
+ * (configured in I2S mode).
+ * @param I2S_InitStruct: pointer to an I2S_InitTypeDef structure that
+ * contains the configuration information for the specified SPI peripheral
+ * configured in I2S mode.
+ * @note
+ * The function calculates the optimal prescaler needed to obtain the most
+ * accurate audio frequency (depending on the I2S clock source, the PLL values
+ * and the product configuration). But in case the prescaler value is greater
+ * than 511, the default value (0x02) will be configured instead. *
+ * @retval None
+ */
+void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct)
+{
+ uint16_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1;
+ uint32_t tmp = 0;
+ RCC_ClocksTypeDef RCC_Clocks;
+ uint32_t sourceclock = 0;
+
+ /* Check the I2S parameters */
+ assert_param(IS_SPI_23_PERIPH(SPIx));
+ assert_param(IS_I2S_MODE(I2S_InitStruct->I2S_Mode));
+ assert_param(IS_I2S_STANDARD(I2S_InitStruct->I2S_Standard));
+ assert_param(IS_I2S_DATA_FORMAT(I2S_InitStruct->I2S_DataFormat));
+ assert_param(IS_I2S_MCLK_OUTPUT(I2S_InitStruct->I2S_MCLKOutput));
+ assert_param(IS_I2S_AUDIO_FREQ(I2S_InitStruct->I2S_AudioFreq));
+ assert_param(IS_I2S_CPOL(I2S_InitStruct->I2S_CPOL));
+
+/*----------------------- SPIx I2SCFGR & I2SPR Configuration -----------------*/
+ /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
+ SPIx->I2SCFGR &= I2SCFGR_CLEAR_Mask;
+ SPIx->I2SPR = 0x0002;
+
+ /* Get the I2SCFGR register value */
+ tmpreg = SPIx->I2SCFGR;
+
+ /* If the default value has to be written, reinitialize i2sdiv and i2sodd*/
+ if(I2S_InitStruct->I2S_AudioFreq == I2S_AudioFreq_Default)
+ {
+ i2sodd = (uint16_t)0;
+ i2sdiv = (uint16_t)2;
+ }
+ /* If the requested audio frequency is not the default, compute the prescaler */
+ else
+ {
+ /* Check the frame length (For the Prescaler computing) */
+ if(I2S_InitStruct->I2S_DataFormat == I2S_DataFormat_16b)
+ {
+ /* Packet length is 16 bits */
+ packetlength = 1;
+ }
+ else
+ {
+ /* Packet length is 32 bits */
+ packetlength = 2;
+ }
+
+ /* Get the I2S clock source mask depending on the peripheral number */
+ if(((uint32_t)SPIx) == SPI2_BASE)
+ {
+ /* The mask is relative to I2S2 */
+ tmp = I2S2_CLOCK_SRC;
+ }
+ else
+ {
+ /* The mask is relative to I2S3 */
+ tmp = I2S3_CLOCK_SRC;
+ }
+
+ /* Check the I2S clock source configuration depending on the Device:
+ Only Connectivity line devices have the PLL3 VCO clock */
+#ifdef STM32F10X_CL
+ if((RCC->CFGR2 & tmp) != 0)
+ {
+ /* Get the configuration bits of RCC PLL3 multiplier */
+ tmp = (uint32_t)((RCC->CFGR2 & I2S_MUL_MASK) >> 12);
+
+ /* Get the value of the PLL3 multiplier */
+ if((tmp > 5) && (tmp < 15))
+ {
+ /* Multiplier is between 8 and 14 (value 15 is forbidden) */
+ tmp += 2;
+ }
+ else
+ {
+ if (tmp == 15)
+ {
+ /* Multiplier is 20 */
+ tmp = 20;
+ }
+ }
+ /* Get the PREDIV2 value */
+ sourceclock = (uint32_t)(((RCC->CFGR2 & I2S_DIV_MASK) >> 4) + 1);
+
+ /* Calculate the Source Clock frequency based on PLL3 and PREDIV2 values */
+ sourceclock = (uint32_t) ((HSE_Value / sourceclock) * tmp * 2);
+ }
+ else
+ {
+ /* I2S Clock source is System clock: Get System Clock frequency */
+ RCC_GetClocksFreq(&RCC_Clocks);
+
+ /* Get the source clock value: based on System Clock value */
+ sourceclock = RCC_Clocks.SYSCLK_Frequency;
+ }
+#else /* STM32F10X_HD */
+ /* I2S Clock source is System clock: Get System Clock frequency */
+ RCC_GetClocksFreq(&RCC_Clocks);
+
+ /* Get the source clock value: based on System Clock value */
+ sourceclock = RCC_Clocks.SYSCLK_Frequency;
+#endif /* STM32F10X_CL */
+
+ /* Compute the Real divider depending on the MCLK output state with a floating point */
+ if(I2S_InitStruct->I2S_MCLKOutput == I2S_MCLKOutput_Enable)
+ {
+ /* MCLK output is enabled */
+ tmp = (uint16_t)(((((sourceclock / 256) * 10) / I2S_InitStruct->I2S_AudioFreq)) + 5);
+ }
+ else
+ {
+ /* MCLK output is disabled */
+ tmp = (uint16_t)(((((sourceclock / (32 * packetlength)) *10 ) / I2S_InitStruct->I2S_AudioFreq)) + 5);
+ }
+
+ /* Remove the floating point */
+ tmp = tmp / 10;
+
+ /* Check the parity of the divider */
+ i2sodd = (uint16_t)(tmp & (uint16_t)0x0001);
+
+ /* Compute the i2sdiv prescaler */
+ i2sdiv = (uint16_t)((tmp - i2sodd) / 2);
+
+ /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */
+ i2sodd = (uint16_t) (i2sodd << 8);
+ }
+
+ /* Test if the divider is 1 or 0 or greater than 0xFF */
+ if ((i2sdiv < 2) || (i2sdiv > 0xFF))
+ {
+ /* Set the default values */
+ i2sdiv = 2;
+ i2sodd = 0;
+ }
+
+ /* Write to SPIx I2SPR register the computed value */
+ SPIx->I2SPR = (uint16_t)(i2sdiv | (uint16_t)(i2sodd | (uint16_t)I2S_InitStruct->I2S_MCLKOutput));
+
+ /* Configure the I2S with the SPI_InitStruct values */
+ tmpreg |= (uint16_t)(I2S_Mode_Select | (uint16_t)(I2S_InitStruct->I2S_Mode | \
+ (uint16_t)(I2S_InitStruct->I2S_Standard | (uint16_t)(I2S_InitStruct->I2S_DataFormat | \
+ (uint16_t)I2S_InitStruct->I2S_CPOL))));
+
+ /* Write to SPIx I2SCFGR */
+ SPIx->I2SCFGR = tmpreg;
+}
+
+/**
+ * @brief Fills each SPI_InitStruct member with its default value.
+ * @param SPI_InitStruct : pointer to a SPI_InitTypeDef structure which will be initialized.
+ * @retval None
+ */
+void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct)
+{
+/*--------------- Reset SPI init structure parameters values -----------------*/
+ /* Initialize the SPI_Direction member */
+ SPI_InitStruct->SPI_Direction = SPI_Direction_2Lines_FullDuplex;
+ /* initialize the SPI_Mode member */
+ SPI_InitStruct->SPI_Mode = SPI_Mode_Slave;
+ /* initialize the SPI_DataSize member */
+ SPI_InitStruct->SPI_DataSize = SPI_DataSize_8b;
+ /* Initialize the SPI_CPOL member */
+ SPI_InitStruct->SPI_CPOL = SPI_CPOL_Low;
+ /* Initialize the SPI_CPHA member */
+ SPI_InitStruct->SPI_CPHA = SPI_CPHA_1Edge;
+ /* Initialize the SPI_NSS member */
+ SPI_InitStruct->SPI_NSS = SPI_NSS_Hard;
+ /* Initialize the SPI_BaudRatePrescaler member */
+ SPI_InitStruct->SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2;
+ /* Initialize the SPI_FirstBit member */
+ SPI_InitStruct->SPI_FirstBit = SPI_FirstBit_MSB;
+ /* Initialize the SPI_CRCPolynomial member */
+ SPI_InitStruct->SPI_CRCPolynomial = 7;
+}
+
+/**
+ * @brief Fills each I2S_InitStruct member with its default value.
+ * @param I2S_InitStruct : pointer to a I2S_InitTypeDef structure which will be initialized.
+ * @retval None
+ */
+void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct)
+{
+/*--------------- Reset I2S init structure parameters values -----------------*/
+ /* Initialize the I2S_Mode member */
+ I2S_InitStruct->I2S_Mode = I2S_Mode_SlaveTx;
+
+ /* Initialize the I2S_Standard member */
+ I2S_InitStruct->I2S_Standard = I2S_Standard_Phillips;
+
+ /* Initialize the I2S_DataFormat member */
+ I2S_InitStruct->I2S_DataFormat = I2S_DataFormat_16b;
+
+ /* Initialize the I2S_MCLKOutput member */
+ I2S_InitStruct->I2S_MCLKOutput = I2S_MCLKOutput_Disable;
+
+ /* Initialize the I2S_AudioFreq member */
+ I2S_InitStruct->I2S_AudioFreq = I2S_AudioFreq_Default;
+
+ /* Initialize the I2S_CPOL member */
+ I2S_InitStruct->I2S_CPOL = I2S_CPOL_Low;
+}
+
+/**
+ * @brief Enables or disables the specified SPI peripheral.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param NewState: new state of the SPIx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected SPI peripheral */
+ SPIx->CR1 |= CR1_SPE_Set;
+ }
+ else
+ {
+ /* Disable the selected SPI peripheral */
+ SPIx->CR1 &= CR1_SPE_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified SPI peripheral (in I2S mode).
+ * @param SPIx: where x can be 2 or 3 to select the SPI peripheral.
+ * @param NewState: new state of the SPIx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_23_PERIPH(SPIx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected SPI peripheral (in I2S mode) */
+ SPIx->I2SCFGR |= I2SCFGR_I2SE_Set;
+ }
+ else
+ {
+ /* Disable the selected SPI peripheral (in I2S mode) */
+ SPIx->I2SCFGR &= I2SCFGR_I2SE_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified SPI/I2S interrupts.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * - 2 or 3 in I2S mode
+ * @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg SPI_I2S_IT_TXE: Tx buffer empty interrupt mask
+ * @arg SPI_I2S_IT_RXNE: Rx buffer not empty interrupt mask
+ * @arg SPI_I2S_IT_ERR: Error interrupt mask
+ * @param NewState: new state of the specified SPI/I2S interrupt.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState)
+{
+ uint16_t itpos = 0, itmask = 0 ;
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ assert_param(IS_SPI_I2S_CONFIG_IT(SPI_I2S_IT));
+
+ /* Get the SPI/I2S IT index */
+ itpos = SPI_I2S_IT >> 4;
+
+ /* Set the IT mask */
+ itmask = (uint16_t)1 << (uint16_t)itpos;
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected SPI/I2S interrupt */
+ SPIx->CR2 |= itmask;
+ }
+ else
+ {
+ /* Disable the selected SPI/I2S interrupt */
+ SPIx->CR2 &= (uint16_t)~itmask;
+ }
+}
+
+/**
+ * @brief Enables or disables the SPIx/I2Sx DMA interface.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * - 2 or 3 in I2S mode
+ * @param SPI_I2S_DMAReq: specifies the SPI/I2S DMA transfer request to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg SPI_I2S_DMAReq_Tx: Tx buffer DMA transfer request
+ * @arg SPI_I2S_DMAReq_Rx: Rx buffer DMA transfer request
+ * @param NewState: new state of the selected SPI/I2S DMA transfer request.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ assert_param(IS_SPI_I2S_DMAREQ(SPI_I2S_DMAReq));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected SPI/I2S DMA requests */
+ SPIx->CR2 |= SPI_I2S_DMAReq;
+ }
+ else
+ {
+ /* Disable the selected SPI/I2S DMA requests */
+ SPIx->CR2 &= (uint16_t)~SPI_I2S_DMAReq;
+ }
+}
+
+/**
+ * @brief Transmits a Data through the SPIx/I2Sx peripheral.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * - 2 or 3 in I2S mode
+ * @param Data : Data to be transmitted.
+ * @retval None
+ */
+void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+
+ /* Write in the DR register the data to be sent */
+ SPIx->DR = Data;
+}
+
+/**
+ * @brief Returns the most recent received data by the SPIx/I2Sx peripheral.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * - 2 or 3 in I2S mode
+ * @retval The value of the received data.
+ */
+uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+
+ /* Return the data in the DR register */
+ return SPIx->DR;
+}
+
+/**
+ * @brief Configures internally by software the NSS pin for the selected SPI.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param SPI_NSSInternalSoft: specifies the SPI NSS internal state.
+ * This parameter can be one of the following values:
+ * @arg SPI_NSSInternalSoft_Set: Set NSS pin internally
+ * @arg SPI_NSSInternalSoft_Reset: Reset NSS pin internally
+ * @retval None
+ */
+void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_NSS_INTERNAL(SPI_NSSInternalSoft));
+ if (SPI_NSSInternalSoft != SPI_NSSInternalSoft_Reset)
+ {
+ /* Set NSS pin internally by software */
+ SPIx->CR1 |= SPI_NSSInternalSoft_Set;
+ }
+ else
+ {
+ /* Reset NSS pin internally by software */
+ SPIx->CR1 &= SPI_NSSInternalSoft_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the SS output for the selected SPI.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param NewState: new state of the SPIx SS output.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected SPI SS output */
+ SPIx->CR2 |= CR2_SSOE_Set;
+ }
+ else
+ {
+ /* Disable the selected SPI SS output */
+ SPIx->CR2 &= CR2_SSOE_Reset;
+ }
+}
+
+/**
+ * @brief Configures the data size for the selected SPI.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param SPI_DataSize: specifies the SPI data size.
+ * This parameter can be one of the following values:
+ * @arg SPI_DataSize_16b: Set data frame format to 16bit
+ * @arg SPI_DataSize_8b: Set data frame format to 8bit
+ * @retval None
+ */
+void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_DATASIZE(SPI_DataSize));
+ /* Clear DFF bit */
+ SPIx->CR1 &= (uint16_t)~SPI_DataSize_16b;
+ /* Set new DFF bit value */
+ SPIx->CR1 |= SPI_DataSize;
+}
+
+/**
+ * @brief Transmit the SPIx CRC value.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @retval None
+ */
+void SPI_TransmitCRC(SPI_TypeDef* SPIx)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+
+ /* Enable the selected SPI CRC transmission */
+ SPIx->CR1 |= CR1_CRCNext_Set;
+}
+
+/**
+ * @brief Enables or disables the CRC value calculation of the transferred bytes.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param NewState: new state of the SPIx CRC value calculation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected SPI CRC calculation */
+ SPIx->CR1 |= CR1_CRCEN_Set;
+ }
+ else
+ {
+ /* Disable the selected SPI CRC calculation */
+ SPIx->CR1 &= CR1_CRCEN_Reset;
+ }
+}
+
+/**
+ * @brief Returns the transmit or the receive CRC register value for the specified SPI.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param SPI_CRC: specifies the CRC register to be read.
+ * This parameter can be one of the following values:
+ * @arg SPI_CRC_Tx: Selects Tx CRC register
+ * @arg SPI_CRC_Rx: Selects Rx CRC register
+ * @retval The selected CRC register value..
+ */
+uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC)
+{
+ uint16_t crcreg = 0;
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_CRC(SPI_CRC));
+ if (SPI_CRC != SPI_CRC_Rx)
+ {
+ /* Get the Tx CRC register */
+ crcreg = SPIx->TXCRCR;
+ }
+ else
+ {
+ /* Get the Rx CRC register */
+ crcreg = SPIx->RXCRCR;
+ }
+ /* Return the selected CRC register */
+ return crcreg;
+}
+
+/**
+ * @brief Returns the CRC Polynomial register value for the specified SPI.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @retval The CRC Polynomial register value.
+ */
+uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+
+ /* Return the CRC polynomial register */
+ return SPIx->CRCPR;
+}
+
+/**
+ * @brief Selects the data transfer direction in bi-directional mode for the specified SPI.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param SPI_Direction: specifies the data transfer direction in bi-directional mode.
+ * This parameter can be one of the following values:
+ * @arg SPI_Direction_Tx: Selects Tx transmission direction
+ * @arg SPI_Direction_Rx: Selects Rx receive direction
+ * @retval None
+ */
+void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_DIRECTION(SPI_Direction));
+ if (SPI_Direction == SPI_Direction_Tx)
+ {
+ /* Set the Tx only mode */
+ SPIx->CR1 |= SPI_Direction_Tx;
+ }
+ else
+ {
+ /* Set the Rx only mode */
+ SPIx->CR1 &= SPI_Direction_Rx;
+ }
+}
+
+/**
+ * @brief Checks whether the specified SPI/I2S flag is set or not.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * - 2 or 3 in I2S mode
+ * @param SPI_I2S_FLAG: specifies the SPI/I2S flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_I2S_FLAG_TXE: Transmit buffer empty flag.
+ * @arg SPI_I2S_FLAG_RXNE: Receive buffer not empty flag.
+ * @arg SPI_I2S_FLAG_BSY: Busy flag.
+ * @arg SPI_I2S_FLAG_OVR: Overrun flag.
+ * @arg SPI_FLAG_MODF: Mode Fault flag.
+ * @arg SPI_FLAG_CRCERR: CRC Error flag.
+ * @arg I2S_FLAG_UDR: Underrun Error flag.
+ * @arg I2S_FLAG_CHSIDE: Channel Side flag.
+ * @retval The new state of SPI_I2S_FLAG (SET or RESET).
+ */
+FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_I2S_GET_FLAG(SPI_I2S_FLAG));
+ /* Check the status of the specified SPI/I2S flag */
+ if ((SPIx->SR & SPI_I2S_FLAG) != (uint16_t)RESET)
+ {
+ /* SPI_I2S_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* SPI_I2S_FLAG is reset */
+ bitstatus = RESET;
+ }
+ /* Return the SPI_I2S_FLAG status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the SPIx CRC Error (CRCERR) flag.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * @param SPI_I2S_FLAG: specifies the SPI flag to clear.
+ * This function clears only CRCERR flag.
+ * @note
+ * - OVR (OverRun error) flag is cleared by software sequence: a read
+ * operation to SPI_DR register (SPI_I2S_ReceiveData()) followed by a read
+ * operation to SPI_SR register (SPI_I2S_GetFlagStatus()).
+ * - UDR (UnderRun error) flag is cleared by a read operation to
+ * SPI_SR register (SPI_I2S_GetFlagStatus()).
+ * - MODF (Mode Fault) flag is cleared by software sequence: a read/write
+ * operation to SPI_SR register (SPI_I2S_GetFlagStatus()) followed by a
+ * write operation to SPI_CR1 register (SPI_Cmd() to enable the SPI).
+ * @retval None
+ */
+void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_I2S_CLEAR_FLAG(SPI_I2S_FLAG));
+
+ /* Clear the selected SPI CRC Error (CRCERR) flag */
+ SPIx->SR = (uint16_t)~SPI_I2S_FLAG;
+}
+
+/**
+ * @brief Checks whether the specified SPI/I2S interrupt has occurred or not.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * - 2 or 3 in I2S mode
+ * @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_I2S_IT_TXE: Transmit buffer empty interrupt.
+ * @arg SPI_I2S_IT_RXNE: Receive buffer not empty interrupt.
+ * @arg SPI_I2S_IT_OVR: Overrun interrupt.
+ * @arg SPI_IT_MODF: Mode Fault interrupt.
+ * @arg SPI_IT_CRCERR: CRC Error interrupt.
+ * @arg I2S_IT_UDR: Underrun Error interrupt.
+ * @retval The new state of SPI_I2S_IT (SET or RESET).
+ */
+ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint16_t itpos = 0, itmask = 0, enablestatus = 0;
+
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_I2S_GET_IT(SPI_I2S_IT));
+
+ /* Get the SPI/I2S IT index */
+ itpos = 0x01 << (SPI_I2S_IT & 0x0F);
+
+ /* Get the SPI/I2S IT mask */
+ itmask = SPI_I2S_IT >> 4;
+
+ /* Set the IT mask */
+ itmask = 0x01 << itmask;
+
+ /* Get the SPI_I2S_IT enable bit status */
+ enablestatus = (SPIx->CR2 & itmask) ;
+
+ /* Check the status of the specified SPI/I2S interrupt */
+ if (((SPIx->SR & itpos) != (uint16_t)RESET) && enablestatus)
+ {
+ /* SPI_I2S_IT is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* SPI_I2S_IT is reset */
+ bitstatus = RESET;
+ }
+ /* Return the SPI_I2S_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the SPIx CRC Error (CRCERR) interrupt pending bit.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * @param SPI_I2S_IT: specifies the SPI interrupt pending bit to clear.
+ * This function clears only CRCERR interrupt pending bit.
+ * @note
+ * - OVR (OverRun Error) interrupt pending bit is cleared by software
+ * sequence: a read operation to SPI_DR register (SPI_I2S_ReceiveData())
+ * followed by a read operation to SPI_SR register (SPI_I2S_GetITStatus()).
+ * - UDR (UnderRun Error) interrupt pending bit is cleared by a read
+ * operation to SPI_SR register (SPI_I2S_GetITStatus()).
+ * - MODF (Mode Fault) interrupt pending bit is cleared by software sequence:
+ * a read/write operation to SPI_SR register (SPI_I2S_GetITStatus())
+ * followed by a write operation to SPI_CR1 register (SPI_Cmd() to enable
+ * the SPI).
+ * @retval None
+ */
+void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT)
+{
+ uint16_t itpos = 0;
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_I2S_CLEAR_IT(SPI_I2S_IT));
+
+ /* Get the SPI IT index */
+ itpos = 0x01 << (SPI_I2S_IT & 0x0F);
+
+ /* Clear the selected SPI CRC Error (CRCERR) interrupt pending bit */
+ SPIx->SR = (uint16_t)~itpos;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_tim.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_tim.c
new file mode 100644
index 00000000..81c8484e
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_tim.c
@@ -0,0 +1,2890 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_tim.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the TIM firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_tim.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup TIM
+ * @brief TIM driver modules
+ * @{
+ */
+
+/** @defgroup TIM_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_Defines
+ * @{
+ */
+
+/* ---------------------- TIM registers bit mask ------------------------ */
+#define SMCR_ETR_Mask ((uint16_t)0x00FF)
+#define CCMR_Offset ((uint16_t)0x0018)
+#define CCER_CCE_Set ((uint16_t)0x0001)
+#define CCER_CCNE_Set ((uint16_t)0x0004)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_FunctionPrototypes
+ * @{
+ */
+
+static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter);
+static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter);
+static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter);
+static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter);
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the TIMx peripheral registers to their default reset values.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @retval None
+ */
+void TIM_DeInit(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+
+ if (TIMx == TIM1)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE);
+ }
+ else if (TIMx == TIM2)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE);
+ }
+ else if (TIMx == TIM3)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE);
+ }
+ else if (TIMx == TIM4)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE);
+ }
+ else if (TIMx == TIM5)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE);
+ }
+ else if (TIMx == TIM6)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE);
+ }
+ else if (TIMx == TIM7)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE);
+ }
+ else if (TIMx == TIM8)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE);
+ }
+ else if (TIMx == TIM9)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, DISABLE);
+ }
+ else if (TIMx == TIM10)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, DISABLE);
+ }
+ else if (TIMx == TIM11)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, DISABLE);
+ }
+ else if (TIMx == TIM12)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, DISABLE);
+ }
+ else if (TIMx == TIM13)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, DISABLE);
+ }
+ else if (TIMx == TIM14)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, DISABLE);
+ }
+ else if (TIMx == TIM15)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, DISABLE);
+ }
+ else if (TIMx == TIM16)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, DISABLE);
+ }
+ else
+ {
+ if (TIMx == TIM17)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, DISABLE);
+ }
+ }
+}
+
+/**
+ * @brief Initializes the TIMx Time Base Unit peripheral according to
+ * the specified parameters in the TIM_TimeBaseInitStruct.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef
+ * structure that contains the configuration information for the
+ * specified TIM peripheral.
+ * @retval None
+ */
+void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct)
+{
+ uint16_t tmpcr1 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode));
+ assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision));
+
+ tmpcr1 = TIMx->CR1;
+
+ if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM2) || (TIMx == TIM3)||
+ (TIMx == TIM4) || (TIMx == TIM5))
+ {
+ /* Select the Counter Mode */
+ tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS)));
+ tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode;
+ }
+
+ if((TIMx != TIM6) && (TIMx != TIM7))
+ {
+ /* Set the clock division */
+ tmpcr1 &= (uint16_t)(~((uint16_t)TIM_CR1_CKD));
+ tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision;
+ }
+
+ TIMx->CR1 = tmpcr1;
+
+ /* Set the Autoreload value */
+ TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ;
+
+ /* Set the Prescaler value */
+ TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler;
+
+ if ((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)|| (TIMx == TIM16) || (TIMx == TIM17))
+ {
+ /* Set the Repetition Counter value */
+ TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter;
+ }
+
+ /* Generate an update event to reload the Prescaler and the Repetition counter
+ values immediately */
+ TIMx->EGR = TIM_PSCReloadMode_Immediate;
+}
+
+/**
+ * @brief Initializes the TIMx Channel1 according to the specified
+ * parameters in the TIM_OCInitStruct.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
+ * that contains the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+ assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= (uint16_t)(~(uint16_t)TIM_CCER_CC1E);
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_OC1M));
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_CC1S));
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= TIM_OCInitStruct->TIM_OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1P));
+ /* Set the Output Compare Polarity */
+ tmpccer |= TIM_OCInitStruct->TIM_OCPolarity;
+
+ /* Set the Output State */
+ tmpccer |= TIM_OCInitStruct->TIM_OutputState;
+
+ if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)||
+ (TIMx == TIM16)|| (TIMx == TIM17))
+ {
+ assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity));
+ assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1NP));
+ /* Set the Output N Polarity */
+ tmpccer |= TIM_OCInitStruct->TIM_OCNPolarity;
+
+ /* Reset the Output N State */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1NE));
+ /* Set the Output N State */
+ tmpccer |= TIM_OCInitStruct->TIM_OutputNState;
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1));
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1N));
+
+ /* Set the Output Idle state */
+ tmpcr2 |= TIM_OCInitStruct->TIM_OCIdleState;
+ /* Set the Output N Idle state */
+ tmpcr2 |= TIM_OCInitStruct->TIM_OCNIdleState;
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR1 = TIM_OCInitStruct->TIM_Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Initializes the TIMx Channel2 according to the specified
+ * parameters in the TIM_OCInitStruct.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select
+ * the TIM peripheral.
+ * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
+ * that contains the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+ assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC2E));
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_OC2M));
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_CC2S));
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2P));
+ /* Set the Output Compare Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 4);
+
+ /* Set the Output State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 4);
+
+ if((TIMx == TIM1) || (TIMx == TIM8))
+ {
+ assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity));
+ assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2NP));
+ /* Set the Output N Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 4);
+
+ /* Reset the Output N State */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2NE));
+ /* Set the Output N State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 4);
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2));
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2N));
+
+ /* Set the Output Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 2);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 2);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR2 = TIM_OCInitStruct->TIM_Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Initializes the TIMx Channel3 according to the specified
+ * parameters in the TIM_OCInitStruct.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
+ * that contains the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+ assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC3E));
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_OC3M));
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_CC3S));
+ /* Select the Output Compare Mode */
+ tmpccmrx |= TIM_OCInitStruct->TIM_OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3P));
+ /* Set the Output Compare Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 8);
+
+ /* Set the Output State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 8);
+
+ if((TIMx == TIM1) || (TIMx == TIM8))
+ {
+ assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity));
+ assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3NP));
+ /* Set the Output N Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 8);
+ /* Reset the Output N State */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3NE));
+
+ /* Set the Output N State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 8);
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3));
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3N));
+ /* Set the Output Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 4);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 4);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR3 = TIM_OCInitStruct->TIM_Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Initializes the TIMx Channel4 according to the specified
+ * parameters in the TIM_OCInitStruct.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
+ * that contains the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+ assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));
+ /* Disable the Channel 2: Reset the CC4E Bit */
+ TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC4E));
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_OC4M));
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_CC4S));
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC4P));
+ /* Set the Output Compare Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 12);
+
+ /* Set the Output State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 12);
+
+ if((TIMx == TIM1) || (TIMx == TIM8))
+ {
+ assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS4));
+ /* Set the Output Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 6);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR4 = TIM_OCInitStruct->TIM_Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Initializes the TIM peripheral according to the specified
+ * parameters in the TIM_ICInitStruct.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure
+ * that contains the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNEL(TIM_ICInitStruct->TIM_Channel));
+ assert_param(IS_TIM_IC_SELECTION(TIM_ICInitStruct->TIM_ICSelection));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICInitStruct->TIM_ICPrescaler));
+ assert_param(IS_TIM_IC_FILTER(TIM_ICInitStruct->TIM_ICFilter));
+
+ if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+ (TIMx == TIM4) ||(TIMx == TIM5))
+ {
+ assert_param(IS_TIM_IC_POLARITY(TIM_ICInitStruct->TIM_ICPolarity));
+ }
+ else
+ {
+ assert_param(IS_TIM_IC_POLARITY_LITE(TIM_ICInitStruct->TIM_ICPolarity));
+ }
+ if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1)
+ {
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ /* TI1 Configuration */
+ TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
+ TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+ else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_2)
+ {
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ /* TI2 Configuration */
+ TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
+ TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+ else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_3)
+ {
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ /* TI3 Configuration */
+ TI3_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
+ TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC3Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+ else
+ {
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ /* TI4 Configuration */
+ TI4_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
+ TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC4Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+}
+
+/**
+ * @brief Configures the TIM peripheral according to the specified
+ * parameters in the TIM_ICInitStruct to measure an external PWM signal.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure
+ * that contains the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct)
+{
+ uint16_t icoppositepolarity = TIM_ICPolarity_Rising;
+ uint16_t icoppositeselection = TIM_ICSelection_DirectTI;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ /* Select the Opposite Input Polarity */
+ if (TIM_ICInitStruct->TIM_ICPolarity == TIM_ICPolarity_Rising)
+ {
+ icoppositepolarity = TIM_ICPolarity_Falling;
+ }
+ else
+ {
+ icoppositepolarity = TIM_ICPolarity_Rising;
+ }
+ /* Select the Opposite Input */
+ if (TIM_ICInitStruct->TIM_ICSelection == TIM_ICSelection_DirectTI)
+ {
+ icoppositeselection = TIM_ICSelection_IndirectTI;
+ }
+ else
+ {
+ icoppositeselection = TIM_ICSelection_DirectTI;
+ }
+ if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1)
+ {
+ /* TI1 Configuration */
+ TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ /* TI2 Configuration */
+ TI2_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+ else
+ {
+ /* TI2 Configuration */
+ TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ /* TI1 Configuration */
+ TI1_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+}
+
+/**
+ * @brief Configures the: Break feature, dead time, Lock level, the OSSI,
+ * the OSSR State and the AOE(automatic output enable).
+ * @param TIMx: where x can be 1 or 8 to select the TIM
+ * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure that
+ * contains the BDTR Register configuration information for the TIM peripheral.
+ * @retval None
+ */
+void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_OSSR_STATE(TIM_BDTRInitStruct->TIM_OSSRState));
+ assert_param(IS_TIM_OSSI_STATE(TIM_BDTRInitStruct->TIM_OSSIState));
+ assert_param(IS_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->TIM_LOCKLevel));
+ assert_param(IS_TIM_BREAK_STATE(TIM_BDTRInitStruct->TIM_Break));
+ assert_param(IS_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->TIM_BreakPolarity));
+ assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->TIM_AutomaticOutput));
+ /* Set the Lock level, the Break enable Bit and the Ploarity, the OSSR State,
+ the OSSI State, the dead time value and the Automatic Output Enable Bit */
+ TIMx->BDTR = (uint32_t)TIM_BDTRInitStruct->TIM_OSSRState | TIM_BDTRInitStruct->TIM_OSSIState |
+ TIM_BDTRInitStruct->TIM_LOCKLevel | TIM_BDTRInitStruct->TIM_DeadTime |
+ TIM_BDTRInitStruct->TIM_Break | TIM_BDTRInitStruct->TIM_BreakPolarity |
+ TIM_BDTRInitStruct->TIM_AutomaticOutput;
+}
+
+/**
+ * @brief Fills each TIM_TimeBaseInitStruct member with its default value.
+ * @param TIM_TimeBaseInitStruct : pointer to a TIM_TimeBaseInitTypeDef
+ * structure which will be initialized.
+ * @retval None
+ */
+void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct)
+{
+ /* Set the default configuration */
+ TIM_TimeBaseInitStruct->TIM_Period = 0xFFFF;
+ TIM_TimeBaseInitStruct->TIM_Prescaler = 0x0000;
+ TIM_TimeBaseInitStruct->TIM_ClockDivision = TIM_CKD_DIV1;
+ TIM_TimeBaseInitStruct->TIM_CounterMode = TIM_CounterMode_Up;
+ TIM_TimeBaseInitStruct->TIM_RepetitionCounter = 0x0000;
+}
+
+/**
+ * @brief Fills each TIM_OCInitStruct member with its default value.
+ * @param TIM_OCInitStruct : pointer to a TIM_OCInitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ /* Set the default configuration */
+ TIM_OCInitStruct->TIM_OCMode = TIM_OCMode_Timing;
+ TIM_OCInitStruct->TIM_OutputState = TIM_OutputState_Disable;
+ TIM_OCInitStruct->TIM_OutputNState = TIM_OutputNState_Disable;
+ TIM_OCInitStruct->TIM_Pulse = 0x0000;
+ TIM_OCInitStruct->TIM_OCPolarity = TIM_OCPolarity_High;
+ TIM_OCInitStruct->TIM_OCNPolarity = TIM_OCPolarity_High;
+ TIM_OCInitStruct->TIM_OCIdleState = TIM_OCIdleState_Reset;
+ TIM_OCInitStruct->TIM_OCNIdleState = TIM_OCNIdleState_Reset;
+}
+
+/**
+ * @brief Fills each TIM_ICInitStruct member with its default value.
+ * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct)
+{
+ /* Set the default configuration */
+ TIM_ICInitStruct->TIM_Channel = TIM_Channel_1;
+ TIM_ICInitStruct->TIM_ICPolarity = TIM_ICPolarity_Rising;
+ TIM_ICInitStruct->TIM_ICSelection = TIM_ICSelection_DirectTI;
+ TIM_ICInitStruct->TIM_ICPrescaler = TIM_ICPSC_DIV1;
+ TIM_ICInitStruct->TIM_ICFilter = 0x00;
+}
+
+/**
+ * @brief Fills each TIM_BDTRInitStruct member with its default value.
+ * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure which
+ * will be initialized.
+ * @retval None
+ */
+void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct)
+{
+ /* Set the default configuration */
+ TIM_BDTRInitStruct->TIM_OSSRState = TIM_OSSRState_Disable;
+ TIM_BDTRInitStruct->TIM_OSSIState = TIM_OSSIState_Disable;
+ TIM_BDTRInitStruct->TIM_LOCKLevel = TIM_LOCKLevel_OFF;
+ TIM_BDTRInitStruct->TIM_DeadTime = 0x00;
+ TIM_BDTRInitStruct->TIM_Break = TIM_Break_Disable;
+ TIM_BDTRInitStruct->TIM_BreakPolarity = TIM_BreakPolarity_Low;
+ TIM_BDTRInitStruct->TIM_AutomaticOutput = TIM_AutomaticOutput_Disable;
+}
+
+/**
+ * @brief Enables or disables the specified TIM peripheral.
+ * @param TIMx: where x can be 1 to 17 to select the TIMx peripheral.
+ * @param NewState: new state of the TIMx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the TIM Counter */
+ TIMx->CR1 |= TIM_CR1_CEN;
+ }
+ else
+ {
+ /* Disable the TIM Counter */
+ TIMx->CR1 &= (uint16_t)(~((uint16_t)TIM_CR1_CEN));
+ }
+}
+
+/**
+ * @brief Enables or disables the TIM peripheral Main Outputs.
+ * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIMx peripheral.
+ * @param NewState: new state of the TIM peripheral Main Outputs.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the TIM Main Output */
+ TIMx->BDTR |= TIM_BDTR_MOE;
+ }
+ else
+ {
+ /* Disable the TIM Main Output */
+ TIMx->BDTR &= (uint16_t)(~((uint16_t)TIM_BDTR_MOE));
+ }
+}
+
+/**
+ * @brief Enables or disables the specified TIM interrupts.
+ * @param TIMx: where x can be 1 to 17 to select the TIMx peripheral.
+ * @param TIM_IT: specifies the TIM interrupts sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg TIM_IT_Update: TIM update Interrupt source
+ * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
+ * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
+ * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
+ * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
+ * @arg TIM_IT_COM: TIM Commutation Interrupt source
+ * @arg TIM_IT_Trigger: TIM Trigger Interrupt source
+ * @arg TIM_IT_Break: TIM Break Interrupt source
+ * @note
+ * - TIM6 and TIM7 can only generate an update interrupt.
+ * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1,
+ * TIM_IT_CC2 or TIM_IT_Trigger.
+ * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1.
+ * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15.
+ * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
+ * @param NewState: new state of the TIM interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_IT(TIM_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the Interrupt sources */
+ TIMx->DIER |= TIM_IT;
+ }
+ else
+ {
+ /* Disable the Interrupt sources */
+ TIMx->DIER &= (uint16_t)~TIM_IT;
+ }
+}
+
+/**
+ * @brief Configures the TIMx event to be generate by software.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_EventSource: specifies the event source.
+ * This parameter can be one or more of the following values:
+ * @arg TIM_EventSource_Update: Timer update Event source
+ * @arg TIM_EventSource_CC1: Timer Capture Compare 1 Event source
+ * @arg TIM_EventSource_CC2: Timer Capture Compare 2 Event source
+ * @arg TIM_EventSource_CC3: Timer Capture Compare 3 Event source
+ * @arg TIM_EventSource_CC4: Timer Capture Compare 4 Event source
+ * @arg TIM_EventSource_COM: Timer COM event source
+ * @arg TIM_EventSource_Trigger: Timer Trigger Event source
+ * @arg TIM_EventSource_Break: Timer Break event source
+ * @note
+ * - TIM6 and TIM7 can only generate an update event.
+ * - TIM_EventSource_COM and TIM_EventSource_Break are used only with TIM1 and TIM8.
+ * @retval None
+ */
+void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_EVENT_SOURCE(TIM_EventSource));
+
+ /* Set the event sources */
+ TIMx->EGR = TIM_EventSource;
+}
+
+/**
+ * @brief Configures the TIMx's DMA interface.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 15, 16 or 17 to select
+ * the TIM peripheral.
+ * @param TIM_DMABase: DMA Base address.
+ * This parameter can be one of the following values:
+ * @arg TIM_DMABase_CR, TIM_DMABase_CR2, TIM_DMABase_SMCR,
+ * TIM_DMABase_DIER, TIM1_DMABase_SR, TIM_DMABase_EGR,
+ * TIM_DMABase_CCMR1, TIM_DMABase_CCMR2, TIM_DMABase_CCER,
+ * TIM_DMABase_CNT, TIM_DMABase_PSC, TIM_DMABase_ARR,
+ * TIM_DMABase_RCR, TIM_DMABase_CCR1, TIM_DMABase_CCR2,
+ * TIM_DMABase_CCR3, TIM_DMABase_CCR4, TIM_DMABase_BDTR,
+ * TIM_DMABase_DCR.
+ * @param TIM_DMABurstLength: DMA Burst length.
+ * This parameter can be one value between:
+ * TIM_DMABurstLength_1Transfer and TIM_DMABurstLength_18Transfers.
+ * @retval None
+ */
+void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST4_PERIPH(TIMx));
+ assert_param(IS_TIM_DMA_BASE(TIM_DMABase));
+ assert_param(IS_TIM_DMA_LENGTH(TIM_DMABurstLength));
+ /* Set the DMA Base and the DMA Burst Length */
+ TIMx->DCR = TIM_DMABase | TIM_DMABurstLength;
+}
+
+/**
+ * @brief Enables or disables the TIMx's DMA Requests.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7, 8, 15, 16 or 17
+ * to select the TIM peripheral.
+ * @param TIM_DMASource: specifies the DMA Request sources.
+ * This parameter can be any combination of the following values:
+ * @arg TIM_DMA_Update: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_Trigger: TIM Trigger DMA source
+ * @param NewState: new state of the DMA Request sources.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST9_PERIPH(TIMx));
+ assert_param(IS_TIM_DMA_SOURCE(TIM_DMASource));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the DMA sources */
+ TIMx->DIER |= TIM_DMASource;
+ }
+ else
+ {
+ /* Disable the DMA sources */
+ TIMx->DIER &= (uint16_t)~TIM_DMASource;
+ }
+}
+
+/**
+ * @brief Configures the TIMx internal Clock
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15
+ * to select the TIM peripheral.
+ * @retval None
+ */
+void TIM_InternalClockConfig(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ /* Disable slave mode to clock the prescaler directly with the internal clock */
+ TIMx->SMCR &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS));
+}
+
+/**
+ * @brief Configures the TIMx Internal Trigger as External Clock
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_ITRSource: Trigger source.
+ * This parameter can be one of the following values:
+ * @param TIM_TS_ITR0: Internal Trigger 0
+ * @param TIM_TS_ITR1: Internal Trigger 1
+ * @param TIM_TS_ITR2: Internal Trigger 2
+ * @param TIM_TS_ITR3: Internal Trigger 3
+ * @retval None
+ */
+void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_INTERNAL_TRIGGER_SELECTION(TIM_InputTriggerSource));
+ /* Select the Internal Trigger */
+ TIM_SelectInputTrigger(TIMx, TIM_InputTriggerSource);
+ /* Select the External clock mode1 */
+ TIMx->SMCR |= TIM_SlaveMode_External1;
+}
+
+/**
+ * @brief Configures the TIMx Trigger as External Clock
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_TIxExternalCLKSource: Trigger source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TIxExternalCLK1Source_TI1ED: TI1 Edge Detector
+ * @arg TIM_TIxExternalCLK1Source_TI1: Filtered Timer Input 1
+ * @arg TIM_TIxExternalCLK1Source_TI2: Filtered Timer Input 2
+ * @param TIM_ICPolarity: specifies the TIx Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @param ICFilter : specifies the filter value.
+ * This parameter must be a value between 0x0 and 0xF.
+ * @retval None
+ */
+void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource,
+ uint16_t TIM_ICPolarity, uint16_t ICFilter)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_TIXCLK_SOURCE(TIM_TIxExternalCLKSource));
+ assert_param(IS_TIM_IC_POLARITY(TIM_ICPolarity));
+ assert_param(IS_TIM_IC_FILTER(ICFilter));
+ /* Configure the Timer Input Clock Source */
+ if (TIM_TIxExternalCLKSource == TIM_TIxExternalCLK1Source_TI2)
+ {
+ TI2_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter);
+ }
+ else
+ {
+ TI1_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter);
+ }
+ /* Select the Trigger source */
+ TIM_SelectInputTrigger(TIMx, TIM_TIxExternalCLKSource);
+ /* Select the External clock mode1 */
+ TIMx->SMCR |= TIM_SlaveMode_External1;
+}
+
+/**
+ * @brief Configures the External clock Mode1
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF.
+ * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
+ * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
+ * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity: The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
+ * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
+ * @param ExtTRGFilter: External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
+ uint16_t ExtTRGFilter)
+{
+ uint16_t tmpsmcr = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler));
+ assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity));
+ assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter));
+ /* Configure the ETR Clock source */
+ TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter);
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+ /* Reset the SMS Bits */
+ tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS));
+ /* Select the External clock mode1 */
+ tmpsmcr |= TIM_SlaveMode_External1;
+ /* Select the Trigger selection : ETRF */
+ tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_TS));
+ tmpsmcr |= TIM_TS_ETRF;
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Configures the External clock Mode2
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF.
+ * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
+ * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
+ * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity: The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
+ * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
+ * @param ExtTRGFilter: External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler,
+ uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler));
+ assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity));
+ assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter));
+ /* Configure the ETR Clock source */
+ TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter);
+ /* Enable the External clock mode2 */
+ TIMx->SMCR |= TIM_SMCR_ECE;
+}
+
+/**
+ * @brief Configures the TIMx External Trigger (ETR).
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF.
+ * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
+ * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
+ * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity: The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
+ * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
+ * @param ExtTRGFilter: External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
+ uint16_t ExtTRGFilter)
+{
+ uint16_t tmpsmcr = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler));
+ assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity));
+ assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter));
+ tmpsmcr = TIMx->SMCR;
+ /* Reset the ETR Bits */
+ tmpsmcr &= SMCR_ETR_Mask;
+ /* Set the Prescaler, the Filter value and the Polarity */
+ tmpsmcr |= (uint16_t)(TIM_ExtTRGPrescaler | (uint16_t)(TIM_ExtTRGPolarity | (uint16_t)(ExtTRGFilter << (uint16_t)8)));
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Configures the TIMx Prescaler.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param Prescaler: specifies the Prescaler Register value
+ * @param TIM_PSCReloadMode: specifies the TIM Prescaler Reload mode
+ * This parameter can be one of the following values:
+ * @arg TIM_PSCReloadMode_Update: The Prescaler is loaded at the update event.
+ * @arg TIM_PSCReloadMode_Immediate: The Prescaler is loaded immediately.
+ * @retval None
+ */
+void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_PRESCALER_RELOAD(TIM_PSCReloadMode));
+ /* Set the Prescaler value */
+ TIMx->PSC = Prescaler;
+ /* Set or reset the UG Bit */
+ TIMx->EGR = TIM_PSCReloadMode;
+}
+
+/**
+ * @brief Specifies the TIMx Counter Mode to be used.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_CounterMode: specifies the Counter Mode to be used
+ * This parameter can be one of the following values:
+ * @arg TIM_CounterMode_Up: TIM Up Counting Mode
+ * @arg TIM_CounterMode_Down: TIM Down Counting Mode
+ * @arg TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1
+ * @arg TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2
+ * @arg TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3
+ * @retval None
+ */
+void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode)
+{
+ uint16_t tmpcr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_COUNTER_MODE(TIM_CounterMode));
+ tmpcr1 = TIMx->CR1;
+ /* Reset the CMS and DIR Bits */
+ tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS)));
+ /* Set the Counter Mode */
+ tmpcr1 |= TIM_CounterMode;
+ /* Write to TIMx CR1 register */
+ TIMx->CR1 = tmpcr1;
+}
+
+/**
+ * @brief Selects the Input Trigger source
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_InputTriggerSource: The Input Trigger source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal Trigger 0
+ * @arg TIM_TS_ITR1: Internal Trigger 1
+ * @arg TIM_TS_ITR2: Internal Trigger 2
+ * @arg TIM_TS_ITR3: Internal Trigger 3
+ * @arg TIM_TS_TI1F_ED: TI1 Edge Detector
+ * @arg TIM_TS_TI1FP1: Filtered Timer Input 1
+ * @arg TIM_TS_TI2FP2: Filtered Timer Input 2
+ * @arg TIM_TS_ETRF: External Trigger input
+ * @retval None
+ */
+void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource)
+{
+ uint16_t tmpsmcr = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_TRIGGER_SELECTION(TIM_InputTriggerSource));
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+ /* Reset the TS Bits */
+ tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_TS));
+ /* Set the Input Trigger source */
+ tmpsmcr |= TIM_InputTriggerSource;
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Configures the TIMx Encoder Interface.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_EncoderMode: specifies the TIMx Encoder Mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge depending on TI2FP2 level.
+ * @arg TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge depending on TI1FP1 level.
+ * @arg TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and TI2FP2 edges depending
+ * on the level of the other input.
+ * @param TIM_IC1Polarity: specifies the IC1 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Falling: IC Falling edge.
+ * @arg TIM_ICPolarity_Rising: IC Rising edge.
+ * @param TIM_IC2Polarity: specifies the IC2 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Falling: IC Falling edge.
+ * @arg TIM_ICPolarity_Rising: IC Rising edge.
+ * @retval None
+ */
+void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode,
+ uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity)
+{
+ uint16_t tmpsmcr = 0;
+ uint16_t tmpccmr1 = 0;
+ uint16_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST5_PERIPH(TIMx));
+ assert_param(IS_TIM_ENCODER_MODE(TIM_EncoderMode));
+ assert_param(IS_TIM_IC_POLARITY(TIM_IC1Polarity));
+ assert_param(IS_TIM_IC_POLARITY(TIM_IC2Polarity));
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+
+ /* Set the encoder Mode */
+ tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS));
+ tmpsmcr |= TIM_EncoderMode;
+
+ /* Select the Capture Compare 1 and the Capture Compare 2 as input */
+ tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC1S)) & (uint16_t)(~((uint16_t)TIM_CCMR1_CC2S)));
+ tmpccmr1 |= TIM_CCMR1_CC1S_0 | TIM_CCMR1_CC2S_0;
+
+ /* Set the TI1 and the TI2 Polarities */
+ tmpccer &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCER_CC1P)) & ((uint16_t)~((uint16_t)TIM_CCER_CC2P)));
+ tmpccer |= (uint16_t)(TIM_IC1Polarity | (uint16_t)(TIM_IC2Polarity << (uint16_t)4));
+
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmr1;
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Forces the TIMx output 1 waveform to active or inactive level.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+ * This parameter can be one of the following values:
+ * @arg TIM_ForcedAction_Active: Force active level on OC1REF
+ * @arg TIM_ForcedAction_InActive: Force inactive level on OC1REF.
+ * @retval None
+ */
+void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC1M Bits */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1M);
+ /* Configure The Forced output Mode */
+ tmpccmr1 |= TIM_ForcedAction;
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Forces the TIMx output 2 waveform to active or inactive level.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+ * This parameter can be one of the following values:
+ * @arg TIM_ForcedAction_Active: Force active level on OC2REF
+ * @arg TIM_ForcedAction_InActive: Force inactive level on OC2REF.
+ * @retval None
+ */
+void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC2M Bits */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2M);
+ /* Configure The Forced output Mode */
+ tmpccmr1 |= (uint16_t)(TIM_ForcedAction << 8);
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Forces the TIMx output 3 waveform to active or inactive level.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+ * This parameter can be one of the following values:
+ * @arg TIM_ForcedAction_Active: Force active level on OC3REF
+ * @arg TIM_ForcedAction_InActive: Force inactive level on OC3REF.
+ * @retval None
+ */
+void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC1M Bits */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3M);
+ /* Configure The Forced output Mode */
+ tmpccmr2 |= TIM_ForcedAction;
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Forces the TIMx output 4 waveform to active or inactive level.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+ * This parameter can be one of the following values:
+ * @arg TIM_ForcedAction_Active: Force active level on OC4REF
+ * @arg TIM_ForcedAction_InActive: Force inactive level on OC4REF.
+ * @retval None
+ */
+void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC2M Bits */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4M);
+ /* Configure The Forced output Mode */
+ tmpccmr2 |= (uint16_t)(TIM_ForcedAction << 8);
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Enables or disables TIMx peripheral Preload register on ARR.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param NewState: new state of the TIMx peripheral Preload register
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the ARR Preload Bit */
+ TIMx->CR1 |= TIM_CR1_ARPE;
+ }
+ else
+ {
+ /* Reset the ARR Preload Bit */
+ TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_ARPE);
+ }
+}
+
+/**
+ * @brief Selects the TIM peripheral Commutation event.
+ * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIMx peripheral
+ * @param NewState: new state of the Commutation event.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the COM Bit */
+ TIMx->CR2 |= TIM_CR2_CCUS;
+ }
+ else
+ {
+ /* Reset the COM Bit */
+ TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCUS);
+ }
+}
+
+/**
+ * @brief Selects the TIMx peripheral Capture Compare DMA source.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 15, 16 or 17 to select
+ * the TIM peripheral.
+ * @param NewState: new state of the Capture Compare DMA source
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST4_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the CCDS Bit */
+ TIMx->CR2 |= TIM_CR2_CCDS;
+ }
+ else
+ {
+ /* Reset the CCDS Bit */
+ TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCDS);
+ }
+}
+
+/**
+ * @brief Sets or Resets the TIM peripheral Capture Compare Preload Control bit.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8 or 15
+ * to select the TIMx peripheral
+ * @param NewState: new state of the Capture Compare Preload Control bit
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST5_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the CCPC Bit */
+ TIMx->CR2 |= TIM_CR2_CCPC;
+ }
+ else
+ {
+ /* Reset the CCPC Bit */
+ TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCPC);
+ }
+}
+
+/**
+ * @brief Enables or disables the TIMx peripheral Preload register on CCR1.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_OCPreload: new state of the TIMx peripheral Preload register
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPreload_Enable
+ * @arg TIM_OCPreload_Disable
+ * @retval None
+ */
+void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC1PE Bit */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1PE);
+ /* Enable or Disable the Output Compare Preload feature */
+ tmpccmr1 |= TIM_OCPreload;
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Enables or disables the TIMx peripheral Preload register on CCR2.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select
+ * the TIM peripheral.
+ * @param TIM_OCPreload: new state of the TIMx peripheral Preload register
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPreload_Enable
+ * @arg TIM_OCPreload_Disable
+ * @retval None
+ */
+void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC2PE Bit */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2PE);
+ /* Enable or Disable the Output Compare Preload feature */
+ tmpccmr1 |= (uint16_t)(TIM_OCPreload << 8);
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Enables or disables the TIMx peripheral Preload register on CCR3.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCPreload: new state of the TIMx peripheral Preload register
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPreload_Enable
+ * @arg TIM_OCPreload_Disable
+ * @retval None
+ */
+void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC3PE Bit */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3PE);
+ /* Enable or Disable the Output Compare Preload feature */
+ tmpccmr2 |= TIM_OCPreload;
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Enables or disables the TIMx peripheral Preload register on CCR4.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCPreload: new state of the TIMx peripheral Preload register
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPreload_Enable
+ * @arg TIM_OCPreload_Disable
+ * @retval None
+ */
+void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC4PE Bit */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4PE);
+ /* Enable or Disable the Output Compare Preload feature */
+ tmpccmr2 |= (uint16_t)(TIM_OCPreload << 8);
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Configures the TIMx Output Compare 1 Fast feature.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCFast_Enable: TIM output compare fast enable
+ * @arg TIM_OCFast_Disable: TIM output compare fast disable
+ * @retval None
+ */
+void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC1FE Bit */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1FE);
+ /* Enable or Disable the Output Compare Fast Bit */
+ tmpccmr1 |= TIM_OCFast;
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Configures the TIMx Output Compare 2 Fast feature.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select
+ * the TIM peripheral.
+ * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCFast_Enable: TIM output compare fast enable
+ * @arg TIM_OCFast_Disable: TIM output compare fast disable
+ * @retval None
+ */
+void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC2FE Bit */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2FE);
+ /* Enable or Disable the Output Compare Fast Bit */
+ tmpccmr1 |= (uint16_t)(TIM_OCFast << 8);
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Configures the TIMx Output Compare 3 Fast feature.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCFast_Enable: TIM output compare fast enable
+ * @arg TIM_OCFast_Disable: TIM output compare fast disable
+ * @retval None
+ */
+void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+ /* Get the TIMx CCMR2 register value */
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC3FE Bit */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3FE);
+ /* Enable or Disable the Output Compare Fast Bit */
+ tmpccmr2 |= TIM_OCFast;
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Configures the TIMx Output Compare 4 Fast feature.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCFast_Enable: TIM output compare fast enable
+ * @arg TIM_OCFast_Disable: TIM output compare fast disable
+ * @retval None
+ */
+void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+ /* Get the TIMx CCMR2 register value */
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC4FE Bit */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4FE);
+ /* Enable or Disable the Output Compare Fast Bit */
+ tmpccmr2 |= (uint16_t)(TIM_OCFast << 8);
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Clears or safeguards the OCREF1 signal on an external event
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCClear_Enable: TIM Output clear enable
+ * @arg TIM_OCClear_Disable: TIM Output clear disable
+ * @retval None
+ */
+void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Reset the OC1CE Bit */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1CE);
+ /* Enable or Disable the Output Compare Clear Bit */
+ tmpccmr1 |= TIM_OCClear;
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Clears or safeguards the OCREF2 signal on an external event
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCClear_Enable: TIM Output clear enable
+ * @arg TIM_OCClear_Disable: TIM Output clear disable
+ * @retval None
+ */
+void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC2CE Bit */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2CE);
+ /* Enable or Disable the Output Compare Clear Bit */
+ tmpccmr1 |= (uint16_t)(TIM_OCClear << 8);
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Clears or safeguards the OCREF3 signal on an external event
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCClear_Enable: TIM Output clear enable
+ * @arg TIM_OCClear_Disable: TIM Output clear disable
+ * @retval None
+ */
+void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC3CE Bit */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3CE);
+ /* Enable or Disable the Output Compare Clear Bit */
+ tmpccmr2 |= TIM_OCClear;
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Clears or safeguards the OCREF4 signal on an external event
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCClear_Enable: TIM Output clear enable
+ * @arg TIM_OCClear_Disable: TIM Output clear disable
+ * @retval None
+ */
+void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC4CE Bit */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4CE);
+ /* Enable or Disable the Output Compare Clear Bit */
+ tmpccmr2 |= (uint16_t)(TIM_OCClear << 8);
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Configures the TIMx channel 1 polarity.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_OCPolarity: specifies the OC1 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPolarity_High: Output Compare active high
+ * @arg TIM_OCPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+ uint16_t tmpccer = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC1P Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC1P);
+ tmpccer |= TIM_OCPolarity;
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx Channel 1N polarity.
+ * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral.
+ * @param TIM_OCNPolarity: specifies the OC1N Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCNPolarity_High: Output Compare active high
+ * @arg TIM_OCNPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity)
+{
+ uint16_t tmpccer = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity));
+
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC1NP Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC1NP);
+ tmpccer |= TIM_OCNPolarity;
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx channel 2 polarity.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_OCPolarity: specifies the OC2 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPolarity_High: Output Compare active high
+ * @arg TIM_OCPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+ uint16_t tmpccer = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC2P Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC2P);
+ tmpccer |= (uint16_t)(TIM_OCPolarity << 4);
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx Channel 2N polarity.
+ * @param TIMx: where x can be 1 or 8 to select the TIM peripheral.
+ * @param TIM_OCNPolarity: specifies the OC2N Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCNPolarity_High: Output Compare active high
+ * @arg TIM_OCNPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity)
+{
+ uint16_t tmpccer = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity));
+
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC2NP Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC2NP);
+ tmpccer |= (uint16_t)(TIM_OCNPolarity << 4);
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx channel 3 polarity.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCPolarity: specifies the OC3 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPolarity_High: Output Compare active high
+ * @arg TIM_OCPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+ uint16_t tmpccer = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC3P Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC3P);
+ tmpccer |= (uint16_t)(TIM_OCPolarity << 8);
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx Channel 3N polarity.
+ * @param TIMx: where x can be 1 or 8 to select the TIM peripheral.
+ * @param TIM_OCNPolarity: specifies the OC3N Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCNPolarity_High: Output Compare active high
+ * @arg TIM_OCNPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity)
+{
+ uint16_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity));
+
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC3NP Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC3NP);
+ tmpccer |= (uint16_t)(TIM_OCNPolarity << 8);
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx channel 4 polarity.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCPolarity: specifies the OC4 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPolarity_High: Output Compare active high
+ * @arg TIM_OCPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+ uint16_t tmpccer = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC4P Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC4P);
+ tmpccer |= (uint16_t)(TIM_OCPolarity << 12);
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel x.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_Channel: specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @arg TIM_Channel_4: TIM Channel 4
+ * @param TIM_CCx: specifies the TIM Channel CCxE bit new state.
+ * This parameter can be: TIM_CCx_Enable or TIM_CCx_Disable.
+ * @retval None
+ */
+void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx)
+{
+ uint16_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_CHANNEL(TIM_Channel));
+ assert_param(IS_TIM_CCX(TIM_CCx));
+
+ tmp = CCER_CCE_Set << TIM_Channel;
+
+ /* Reset the CCxE Bit */
+ TIMx->CCER &= (uint16_t)~ tmp;
+
+ /* Set or reset the CCxE Bit */
+ TIMx->CCER |= (uint16_t)(TIM_CCx << TIM_Channel);
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel xN.
+ * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral.
+ * @param TIM_Channel: specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @param TIM_CCxN: specifies the TIM Channel CCxNE bit new state.
+ * This parameter can be: TIM_CCxN_Enable or TIM_CCxN_Disable.
+ * @retval None
+ */
+void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN)
+{
+ uint16_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_COMPLEMENTARY_CHANNEL(TIM_Channel));
+ assert_param(IS_TIM_CCXN(TIM_CCxN));
+
+ tmp = CCER_CCNE_Set << TIM_Channel;
+
+ /* Reset the CCxNE Bit */
+ TIMx->CCER &= (uint16_t) ~tmp;
+
+ /* Set or reset the CCxNE Bit */
+ TIMx->CCER |= (uint16_t)(TIM_CCxN << TIM_Channel);
+}
+
+/**
+ * @brief Selects the TIM Output Compare Mode.
+ * @note This function disables the selected channel before changing the Output
+ * Compare Mode.
+ * User has to enable this channel using TIM_CCxCmd and TIM_CCxNCmd functions.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_Channel: specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @arg TIM_Channel_4: TIM Channel 4
+ * @param TIM_OCMode: specifies the TIM Output Compare Mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCMode_Timing
+ * @arg TIM_OCMode_Active
+ * @arg TIM_OCMode_Toggle
+ * @arg TIM_OCMode_PWM1
+ * @arg TIM_OCMode_PWM2
+ * @arg TIM_ForcedAction_Active
+ * @arg TIM_ForcedAction_InActive
+ * @retval None
+ */
+void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode)
+{
+ uint32_t tmp = 0;
+ uint16_t tmp1 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_CHANNEL(TIM_Channel));
+ assert_param(IS_TIM_OCM(TIM_OCMode));
+
+ tmp = (uint32_t) TIMx;
+ tmp += CCMR_Offset;
+
+ tmp1 = CCER_CCE_Set << (uint16_t)TIM_Channel;
+
+ /* Disable the Channel: Reset the CCxE Bit */
+ TIMx->CCER &= (uint16_t) ~tmp1;
+
+ if((TIM_Channel == TIM_Channel_1) ||(TIM_Channel == TIM_Channel_3))
+ {
+ tmp += (TIM_Channel>>1);
+
+ /* Reset the OCxM bits in the CCMRx register */
+ *(__IO uint32_t *) tmp &= (uint32_t)~((uint32_t)TIM_CCMR1_OC1M);
+
+ /* Configure the OCxM bits in the CCMRx register */
+ *(__IO uint32_t *) tmp |= TIM_OCMode;
+ }
+ else
+ {
+ tmp += (uint16_t)(TIM_Channel - (uint16_t)4)>> (uint16_t)1;
+
+ /* Reset the OCxM bits in the CCMRx register */
+ *(__IO uint32_t *) tmp &= (uint32_t)~((uint32_t)TIM_CCMR1_OC2M);
+
+ /* Configure the OCxM bits in the CCMRx register */
+ *(__IO uint32_t *) tmp |= (uint16_t)(TIM_OCMode << 8);
+ }
+}
+
+/**
+ * @brief Enables or Disables the TIMx Update event.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param NewState: new state of the TIMx UDIS bit
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the Update Disable Bit */
+ TIMx->CR1 |= TIM_CR1_UDIS;
+ }
+ else
+ {
+ /* Reset the Update Disable Bit */
+ TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_UDIS);
+ }
+}
+
+/**
+ * @brief Configures the TIMx Update Request Interrupt source.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_UpdateSource: specifies the Update source.
+ * This parameter can be one of the following values:
+ * @arg TIM_UpdateSource_Regular: Source of update is the counter overflow/underflow
+ or the setting of UG bit, or an update generation
+ through the slave mode controller.
+ * @arg TIM_UpdateSource_Global: Source of update is counter overflow/underflow.
+ * @retval None
+ */
+void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_UPDATE_SOURCE(TIM_UpdateSource));
+ if (TIM_UpdateSource != TIM_UpdateSource_Global)
+ {
+ /* Set the URS Bit */
+ TIMx->CR1 |= TIM_CR1_URS;
+ }
+ else
+ {
+ /* Reset the URS Bit */
+ TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_URS);
+ }
+}
+
+/**
+ * @brief Enables or disables the TIMx's Hall sensor interface.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param NewState: new state of the TIMx Hall sensor interface.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the TI1S Bit */
+ TIMx->CR2 |= TIM_CR2_TI1S;
+ }
+ else
+ {
+ /* Reset the TI1S Bit */
+ TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_TI1S);
+ }
+}
+
+/**
+ * @brief Selects the TIMx's One Pulse Mode.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_OPMode: specifies the OPM Mode to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_OPMode_Single
+ * @arg TIM_OPMode_Repetitive
+ * @retval None
+ */
+void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_OPM_MODE(TIM_OPMode));
+ /* Reset the OPM Bit */
+ TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_OPM);
+ /* Configure the OPM Mode */
+ TIMx->CR1 |= TIM_OPMode;
+}
+
+/**
+ * @brief Selects the TIMx Trigger Output Mode.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_TRGOSource: specifies the Trigger Output source.
+ * This paramter can be one of the following values:
+ *
+ * - For all TIMx
+ * @arg TIM_TRGOSource_Reset: The UG bit in the TIM_EGR register is used as the trigger output (TRGO).
+ * @arg TIM_TRGOSource_Enable: The Counter Enable CEN is used as the trigger output (TRGO).
+ * @arg TIM_TRGOSource_Update: The update event is selected as the trigger output (TRGO).
+ *
+ * - For all TIMx except TIM6 and TIM7
+ * @arg TIM_TRGOSource_OC1: The trigger output sends a positive pulse when the CC1IF flag
+ * is to be set, as soon as a capture or compare match occurs (TRGO).
+ * @arg TIM_TRGOSource_OC1Ref: OC1REF signal is used as the trigger output (TRGO).
+ * @arg TIM_TRGOSource_OC2Ref: OC2REF signal is used as the trigger output (TRGO).
+ * @arg TIM_TRGOSource_OC3Ref: OC3REF signal is used as the trigger output (TRGO).
+ * @arg TIM_TRGOSource_OC4Ref: OC4REF signal is used as the trigger output (TRGO).
+ *
+ * @retval None
+ */
+void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST7_PERIPH(TIMx));
+ assert_param(IS_TIM_TRGO_SOURCE(TIM_TRGOSource));
+ /* Reset the MMS Bits */
+ TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_MMS);
+ /* Select the TRGO source */
+ TIMx->CR2 |= TIM_TRGOSource;
+}
+
+/**
+ * @brief Selects the TIMx Slave Mode.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_SlaveMode: specifies the Timer Slave Mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_SlaveMode_Reset: Rising edge of the selected trigger signal (TRGI) re-initializes
+ * the counter and triggers an update of the registers.
+ * @arg TIM_SlaveMode_Gated: The counter clock is enabled when the trigger signal (TRGI) is high.
+ * @arg TIM_SlaveMode_Trigger: The counter starts at a rising edge of the trigger TRGI.
+ * @arg TIM_SlaveMode_External1: Rising edges of the selected trigger (TRGI) clock the counter.
+ * @retval None
+ */
+void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_SLAVE_MODE(TIM_SlaveMode));
+ /* Reset the SMS Bits */
+ TIMx->SMCR &= (uint16_t)~((uint16_t)TIM_SMCR_SMS);
+ /* Select the Slave Mode */
+ TIMx->SMCR |= TIM_SlaveMode;
+}
+
+/**
+ * @brief Sets or Resets the TIMx Master/Slave Mode.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_MasterSlaveMode: specifies the Timer Master Slave Mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_MasterSlaveMode_Enable: synchronization between the current timer
+ * and its slaves (through TRGO).
+ * @arg TIM_MasterSlaveMode_Disable: No action
+ * @retval None
+ */
+void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_MSM_STATE(TIM_MasterSlaveMode));
+ /* Reset the MSM Bit */
+ TIMx->SMCR &= (uint16_t)~((uint16_t)TIM_SMCR_MSM);
+
+ /* Set or Reset the MSM Bit */
+ TIMx->SMCR |= TIM_MasterSlaveMode;
+}
+
+/**
+ * @brief Sets the TIMx Counter Register value
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param Counter: specifies the Counter register new value.
+ * @retval None
+ */
+void TIM_SetCounter(TIM_TypeDef* TIMx, uint16_t Counter)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ /* Set the Counter Register value */
+ TIMx->CNT = Counter;
+}
+
+/**
+ * @brief Sets the TIMx Autoreload Register value
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param Autoreload: specifies the Autoreload register new value.
+ * @retval None
+ */
+void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint16_t Autoreload)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ /* Set the Autoreload Register value */
+ TIMx->ARR = Autoreload;
+}
+
+/**
+ * @brief Sets the TIMx Capture Compare1 Register value
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param Compare1: specifies the Capture Compare1 register new value.
+ * @retval None
+ */
+void TIM_SetCompare1(TIM_TypeDef* TIMx, uint16_t Compare1)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ /* Set the Capture Compare1 Register value */
+ TIMx->CCR1 = Compare1;
+}
+
+/**
+ * @brief Sets the TIMx Capture Compare2 Register value
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param Compare2: specifies the Capture Compare2 register new value.
+ * @retval None
+ */
+void TIM_SetCompare2(TIM_TypeDef* TIMx, uint16_t Compare2)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ /* Set the Capture Compare2 Register value */
+ TIMx->CCR2 = Compare2;
+}
+
+/**
+ * @brief Sets the TIMx Capture Compare3 Register value
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param Compare3: specifies the Capture Compare3 register new value.
+ * @retval None
+ */
+void TIM_SetCompare3(TIM_TypeDef* TIMx, uint16_t Compare3)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ /* Set the Capture Compare3 Register value */
+ TIMx->CCR3 = Compare3;
+}
+
+/**
+ * @brief Sets the TIMx Capture Compare4 Register value
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param Compare4: specifies the Capture Compare4 register new value.
+ * @retval None
+ */
+void TIM_SetCompare4(TIM_TypeDef* TIMx, uint16_t Compare4)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ /* Set the Capture Compare4 Register value */
+ TIMx->CCR4 = Compare4;
+}
+
+/**
+ * @brief Sets the TIMx Input Capture 1 prescaler.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_ICPSC: specifies the Input Capture1 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+ /* Reset the IC1PSC Bits */
+ TIMx->CCMR1 &= (uint16_t)~((uint16_t)TIM_CCMR1_IC1PSC);
+ /* Set the IC1PSC value */
+ TIMx->CCMR1 |= TIM_ICPSC;
+}
+
+/**
+ * @brief Sets the TIMx Input Capture 2 prescaler.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_ICPSC: specifies the Input Capture2 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+ /* Reset the IC2PSC Bits */
+ TIMx->CCMR1 &= (uint16_t)~((uint16_t)TIM_CCMR1_IC2PSC);
+ /* Set the IC2PSC value */
+ TIMx->CCMR1 |= (uint16_t)(TIM_ICPSC << 8);
+}
+
+/**
+ * @brief Sets the TIMx Input Capture 3 prescaler.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ICPSC: specifies the Input Capture3 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+ /* Reset the IC3PSC Bits */
+ TIMx->CCMR2 &= (uint16_t)~((uint16_t)TIM_CCMR2_IC3PSC);
+ /* Set the IC3PSC value */
+ TIMx->CCMR2 |= TIM_ICPSC;
+}
+
+/**
+ * @brief Sets the TIMx Input Capture 4 prescaler.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ICPSC: specifies the Input Capture4 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+ /* Reset the IC4PSC Bits */
+ TIMx->CCMR2 &= (uint16_t)~((uint16_t)TIM_CCMR2_IC4PSC);
+ /* Set the IC4PSC value */
+ TIMx->CCMR2 |= (uint16_t)(TIM_ICPSC << 8);
+}
+
+/**
+ * @brief Sets the TIMx Clock Division value.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select
+ * the TIM peripheral.
+ * @param TIM_CKD: specifies the clock division value.
+ * This parameter can be one of the following value:
+ * @arg TIM_CKD_DIV1: TDTS = Tck_tim
+ * @arg TIM_CKD_DIV2: TDTS = 2*Tck_tim
+ * @arg TIM_CKD_DIV4: TDTS = 4*Tck_tim
+ * @retval None
+ */
+void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_CKD_DIV(TIM_CKD));
+ /* Reset the CKD Bits */
+ TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_CKD);
+ /* Set the CKD value */
+ TIMx->CR1 |= TIM_CKD;
+}
+
+/**
+ * @brief Gets the TIMx Input Capture 1 value.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @retval Capture Compare 1 Register value.
+ */
+uint16_t TIM_GetCapture1(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ /* Get the Capture 1 Register value */
+ return TIMx->CCR1;
+}
+
+/**
+ * @brief Gets the TIMx Input Capture 2 value.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @retval Capture Compare 2 Register value.
+ */
+uint16_t TIM_GetCapture2(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ /* Get the Capture 2 Register value */
+ return TIMx->CCR2;
+}
+
+/**
+ * @brief Gets the TIMx Input Capture 3 value.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @retval Capture Compare 3 Register value.
+ */
+uint16_t TIM_GetCapture3(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ /* Get the Capture 3 Register value */
+ return TIMx->CCR3;
+}
+
+/**
+ * @brief Gets the TIMx Input Capture 4 value.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @retval Capture Compare 4 Register value.
+ */
+uint16_t TIM_GetCapture4(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ /* Get the Capture 4 Register value */
+ return TIMx->CCR4;
+}
+
+/**
+ * @brief Gets the TIMx Counter value.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @retval Counter Register value.
+ */
+uint16_t TIM_GetCounter(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ /* Get the Counter Register value */
+ return TIMx->CNT;
+}
+
+/**
+ * @brief Gets the TIMx Prescaler value.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @retval Prescaler Register value.
+ */
+uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ /* Get the Prescaler Register value */
+ return TIMx->PSC;
+}
+
+/**
+ * @brief Checks whether the specified TIM flag is set or not.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg TIM_FLAG_Update: TIM update Flag
+ * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag
+ * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag
+ * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag
+ * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag
+ * @arg TIM_FLAG_COM: TIM Commutation Flag
+ * @arg TIM_FLAG_Trigger: TIM Trigger Flag
+ * @arg TIM_FLAG_Break: TIM Break Flag
+ * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag
+ * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag
+ * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag
+ * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag
+ * @note
+ * - TIM6 and TIM7 can have only one update flag.
+ * - TIM9, TIM12 and TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1,
+ * TIM_FLAG_CC2 or TIM_FLAG_Trigger.
+ * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1.
+ * - TIM_FLAG_Break is used only with TIM1, TIM8 and TIM15.
+ * - TIM_FLAG_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
+ * @retval The new state of TIM_FLAG (SET or RESET).
+ */
+FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG)
+{
+ ITStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_GET_FLAG(TIM_FLAG));
+
+ if ((TIMx->SR & TIM_FLAG) != (uint16_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the TIMx's pending flags.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_FLAG: specifies the flag bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg TIM_FLAG_Update: TIM update Flag
+ * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag
+ * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag
+ * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag
+ * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag
+ * @arg TIM_FLAG_COM: TIM Commutation Flag
+ * @arg TIM_FLAG_Trigger: TIM Trigger Flag
+ * @arg TIM_FLAG_Break: TIM Break Flag
+ * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag
+ * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag
+ * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag
+ * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag
+ * @note
+ * - TIM6 and TIM7 can have only one update flag.
+ * - TIM9, TIM12 and TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1,
+ * TIM_FLAG_CC2 or TIM_FLAG_Trigger.
+ * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1.
+ * - TIM_FLAG_Break is used only with TIM1, TIM8 and TIM15.
+ * - TIM_FLAG_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
+ * @retval None
+ */
+void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_CLEAR_FLAG(TIM_FLAG));
+
+ /* Clear the flags */
+ TIMx->SR = (uint16_t)~TIM_FLAG;
+}
+
+/**
+ * @brief Checks whether the TIM interrupt has occurred or not.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_IT: specifies the TIM interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_Update: TIM update Interrupt source
+ * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
+ * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
+ * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
+ * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
+ * @arg TIM_IT_COM: TIM Commutation Interrupt source
+ * @arg TIM_IT_Trigger: TIM Trigger Interrupt source
+ * @arg TIM_IT_Break: TIM Break Interrupt source
+ * @note
+ * - TIM6 and TIM7 can generate only an update interrupt.
+ * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1,
+ * TIM_IT_CC2 or TIM_IT_Trigger.
+ * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1.
+ * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15.
+ * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
+ * @retval The new state of the TIM_IT(SET or RESET).
+ */
+ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint16_t itstatus = 0x0, itenable = 0x0;
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_GET_IT(TIM_IT));
+
+ itstatus = TIMx->SR & TIM_IT;
+
+ itenable = TIMx->DIER & TIM_IT;
+ if ((itstatus != (uint16_t)RESET) && (itenable != (uint16_t)RESET))
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the TIMx's interrupt pending bits.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_IT: specifies the pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg TIM_IT_Update: TIM1 update Interrupt source
+ * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
+ * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
+ * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
+ * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
+ * @arg TIM_IT_COM: TIM Commutation Interrupt source
+ * @arg TIM_IT_Trigger: TIM Trigger Interrupt source
+ * @arg TIM_IT_Break: TIM Break Interrupt source
+ * @note
+ * - TIM6 and TIM7 can generate only an update interrupt.
+ * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1,
+ * TIM_IT_CC2 or TIM_IT_Trigger.
+ * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1.
+ * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15.
+ * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
+ * @retval None
+ */
+void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_IT(TIM_IT));
+ /* Clear the IT pending Bit */
+ TIMx->SR = (uint16_t)~TIM_IT;
+}
+
+/**
+ * @brief Configure the TI1 as Input.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2.
+ * @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter)
+{
+ uint16_t tmpccmr1 = 0, tmpccer = 0;
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC1E);
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+ /* Select the Input and set the filter */
+ tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC1S)) & ((uint16_t)~((uint16_t)TIM_CCMR1_IC1F)));
+ tmpccmr1 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4));
+
+ if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+ (TIMx == TIM4) ||(TIMx == TIM5))
+ {
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC1P));
+ tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E);
+ }
+ else
+ {
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC1P | TIM_CCER_CC1NP));
+ tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E);
+ }
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI2 as Input.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1.
+ * @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter)
+{
+ uint16_t tmpccmr1 = 0, tmpccer = 0, tmp = 0;
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC2E);
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+ tmp = (uint16_t)(TIM_ICPolarity << 4);
+ /* Select the Input and set the filter */
+ tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC2S)) & ((uint16_t)~((uint16_t)TIM_CCMR1_IC2F)));
+ tmpccmr1 |= (uint16_t)(TIM_ICFilter << 12);
+ tmpccmr1 |= (uint16_t)(TIM_ICSelection << 8);
+
+ if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+ (TIMx == TIM4) ||(TIMx == TIM5))
+ {
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC2P));
+ tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC2E);
+ }
+ else
+ {
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC2P | TIM_CCER_CC2NP));
+ tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC2E);
+ }
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI3 as Input.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4.
+ * @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter)
+{
+ uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0;
+ /* Disable the Channel 3: Reset the CC3E Bit */
+ TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC3E);
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+ tmp = (uint16_t)(TIM_ICPolarity << 8);
+ /* Select the Input and set the filter */
+ tmpccmr2 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR2_CC3S)) & ((uint16_t)~((uint16_t)TIM_CCMR2_IC3F)));
+ tmpccmr2 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4));
+
+ if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+ (TIMx == TIM4) ||(TIMx == TIM5))
+ {
+ /* Select the Polarity and set the CC3E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P));
+ tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC3E);
+ }
+ else
+ {
+ /* Select the Polarity and set the CC3E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P | TIM_CCER_CC3NP));
+ tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC3E);
+ }
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI4 as Input.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3.
+ * @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter)
+{
+ uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC4E);
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+ tmp = (uint16_t)(TIM_ICPolarity << 12);
+ /* Select the Input and set the filter */
+ tmpccmr2 &= (uint16_t)((uint16_t)(~(uint16_t)TIM_CCMR2_CC4S) & ((uint16_t)~((uint16_t)TIM_CCMR2_IC4F)));
+ tmpccmr2 |= (uint16_t)(TIM_ICSelection << 8);
+ tmpccmr2 |= (uint16_t)(TIM_ICFilter << 12);
+
+ if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+ (TIMx == TIM4) ||(TIMx == TIM5))
+ {
+ /* Select the Polarity and set the CC4E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC4P));
+ tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC4E);
+ }
+ else
+ {
+ /* Select the Polarity and set the CC4E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P | TIM_CCER_CC4NP));
+ tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC4E);
+ }
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_usart.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_usart.c
new file mode 100644
index 00000000..a3f16f15
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_usart.c
@@ -0,0 +1,1058 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_usart.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the USART firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_usart.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup USART
+ * @brief USART driver modules
+ * @{
+ */
+
+/** @defgroup USART_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Private_Defines
+ * @{
+ */
+
+#define CR1_UE_Set ((uint16_t)0x2000) /*!< USART Enable Mask */
+#define CR1_UE_Reset ((uint16_t)0xDFFF) /*!< USART Disable Mask */
+
+#define CR1_WAKE_Mask ((uint16_t)0xF7FF) /*!< USART WakeUp Method Mask */
+
+#define CR1_RWU_Set ((uint16_t)0x0002) /*!< USART mute mode Enable Mask */
+#define CR1_RWU_Reset ((uint16_t)0xFFFD) /*!< USART mute mode Enable Mask */
+#define CR1_SBK_Set ((uint16_t)0x0001) /*!< USART Break Character send Mask */
+#define CR1_CLEAR_Mask ((uint16_t)0xE9F3) /*!< USART CR1 Mask */
+#define CR2_Address_Mask ((uint16_t)0xFFF0) /*!< USART address Mask */
+
+#define CR2_LINEN_Set ((uint16_t)0x4000) /*!< USART LIN Enable Mask */
+#define CR2_LINEN_Reset ((uint16_t)0xBFFF) /*!< USART LIN Disable Mask */
+
+#define CR2_LBDL_Mask ((uint16_t)0xFFDF) /*!< USART LIN Break detection Mask */
+#define CR2_STOP_CLEAR_Mask ((uint16_t)0xCFFF) /*!< USART CR2 STOP Bits Mask */
+#define CR2_CLOCK_CLEAR_Mask ((uint16_t)0xF0FF) /*!< USART CR2 Clock Mask */
+
+#define CR3_SCEN_Set ((uint16_t)0x0020) /*!< USART SC Enable Mask */
+#define CR3_SCEN_Reset ((uint16_t)0xFFDF) /*!< USART SC Disable Mask */
+
+#define CR3_NACK_Set ((uint16_t)0x0010) /*!< USART SC NACK Enable Mask */
+#define CR3_NACK_Reset ((uint16_t)0xFFEF) /*!< USART SC NACK Disable Mask */
+
+#define CR3_HDSEL_Set ((uint16_t)0x0008) /*!< USART Half-Duplex Enable Mask */
+#define CR3_HDSEL_Reset ((uint16_t)0xFFF7) /*!< USART Half-Duplex Disable Mask */
+
+#define CR3_IRLP_Mask ((uint16_t)0xFFFB) /*!< USART IrDA LowPower mode Mask */
+#define CR3_CLEAR_Mask ((uint16_t)0xFCFF) /*!< USART CR3 Mask */
+
+#define CR3_IREN_Set ((uint16_t)0x0002) /*!< USART IrDA Enable Mask */
+#define CR3_IREN_Reset ((uint16_t)0xFFFD) /*!< USART IrDA Disable Mask */
+#define GTPR_LSB_Mask ((uint16_t)0x00FF) /*!< Guard Time Register LSB Mask */
+#define GTPR_MSB_Mask ((uint16_t)0xFF00) /*!< Guard Time Register MSB Mask */
+#define IT_Mask ((uint16_t)0x001F) /*!< USART Interrupt Mask */
+
+/* USART OverSampling-8 Mask */
+#define CR1_OVER8_Set ((u16)0x8000) /* USART OVER8 mode Enable Mask */
+#define CR1_OVER8_Reset ((u16)0x7FFF) /* USART OVER8 mode Disable Mask */
+
+/* USART One Bit Sampling Mask */
+#define CR3_ONEBITE_Set ((u16)0x0800) /* USART ONEBITE mode Enable Mask */
+#define CR3_ONEBITE_Reset ((u16)0xF7FF) /* USART ONEBITE mode Disable Mask */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the USARTx peripheral registers to their default reset values.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @retval None
+ */
+void USART_DeInit(USART_TypeDef* USARTx)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+
+ if (USARTx == USART1)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE);
+ }
+ else if (USARTx == USART2)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE);
+ }
+ else if (USARTx == USART3)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE);
+ }
+ else if (USARTx == UART4)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE);
+ }
+ else
+ {
+ if (USARTx == UART5)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, DISABLE);
+ }
+ }
+}
+
+/**
+ * @brief Initializes the USARTx peripheral according to the specified
+ * parameters in the USART_InitStruct .
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_InitStruct: pointer to a USART_InitTypeDef structure
+ * that contains the configuration information for the specified USART
+ * peripheral.
+ * @retval None
+ */
+void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct)
+{
+ uint32_t tmpreg = 0x00, apbclock = 0x00;
+ uint32_t integerdivider = 0x00;
+ uint32_t fractionaldivider = 0x00;
+ uint32_t usartxbase = 0;
+ RCC_ClocksTypeDef RCC_ClocksStatus;
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate));
+ assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength));
+ assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits));
+ assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity));
+ assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode));
+ assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl));
+ /* The hardware flow control is available only for USART1, USART2 and USART3 */
+ if (USART_InitStruct->USART_HardwareFlowControl != USART_HardwareFlowControl_None)
+ {
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ }
+
+ usartxbase = (uint32_t)USARTx;
+
+/*---------------------------- USART CR2 Configuration -----------------------*/
+ tmpreg = USARTx->CR2;
+ /* Clear STOP[13:12] bits */
+ tmpreg &= CR2_STOP_CLEAR_Mask;
+ /* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit ------------*/
+ /* Set STOP[13:12] bits according to USART_StopBits value */
+ tmpreg |= (uint32_t)USART_InitStruct->USART_StopBits;
+
+ /* Write to USART CR2 */
+ USARTx->CR2 = (uint16_t)tmpreg;
+
+/*---------------------------- USART CR1 Configuration -----------------------*/
+ tmpreg = USARTx->CR1;
+ /* Clear M, PCE, PS, TE and RE bits */
+ tmpreg &= CR1_CLEAR_Mask;
+ /* Configure the USART Word Length, Parity and mode ----------------------- */
+ /* Set the M bits according to USART_WordLength value */
+ /* Set PCE and PS bits according to USART_Parity value */
+ /* Set TE and RE bits according to USART_Mode value */
+ tmpreg |= (uint32_t)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity |
+ USART_InitStruct->USART_Mode;
+ /* Write to USART CR1 */
+ USARTx->CR1 = (uint16_t)tmpreg;
+
+/*---------------------------- USART CR3 Configuration -----------------------*/
+ tmpreg = USARTx->CR3;
+ /* Clear CTSE and RTSE bits */
+ tmpreg &= CR3_CLEAR_Mask;
+ /* Configure the USART HFC -------------------------------------------------*/
+ /* Set CTSE and RTSE bits according to USART_HardwareFlowControl value */
+ tmpreg |= USART_InitStruct->USART_HardwareFlowControl;
+ /* Write to USART CR3 */
+ USARTx->CR3 = (uint16_t)tmpreg;
+
+/*---------------------------- USART BRR Configuration -----------------------*/
+ /* Configure the USART Baud Rate -------------------------------------------*/
+ RCC_GetClocksFreq(&RCC_ClocksStatus);
+ if (usartxbase == USART1_BASE)
+ {
+ apbclock = RCC_ClocksStatus.PCLK2_Frequency;
+ }
+ else
+ {
+ apbclock = RCC_ClocksStatus.PCLK1_Frequency;
+ }
+
+ /* Determine the integer part */
+ if ((USARTx->CR1 & CR1_OVER8_Set) != 0)
+ {
+ /* Integer part computing in case Oversampling mode is 8 Samples */
+ integerdivider = ((25 * apbclock) / (2 * (USART_InitStruct->USART_BaudRate)));
+ }
+ else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */
+ {
+ /* Integer part computing in case Oversampling mode is 16 Samples */
+ integerdivider = ((25 * apbclock) / (4 * (USART_InitStruct->USART_BaudRate)));
+ }
+ tmpreg = (integerdivider / 100) << 4;
+
+ /* Determine the fractional part */
+ fractionaldivider = integerdivider - (100 * (tmpreg >> 4));
+
+ /* Implement the fractional part in the register */
+ if ((USARTx->CR1 & CR1_OVER8_Set) != 0)
+ {
+ tmpreg |= ((((fractionaldivider * 8) + 50) / 100)) & ((uint8_t)0x07);
+ }
+ else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */
+ {
+ tmpreg |= ((((fractionaldivider * 16) + 50) / 100)) & ((uint8_t)0x0F);
+ }
+
+ /* Write to USART BRR */
+ USARTx->BRR = (uint16_t)tmpreg;
+}
+
+/**
+ * @brief Fills each USART_InitStruct member with its default value.
+ * @param USART_InitStruct: pointer to a USART_InitTypeDef structure
+ * which will be initialized.
+ * @retval None
+ */
+void USART_StructInit(USART_InitTypeDef* USART_InitStruct)
+{
+ /* USART_InitStruct members default value */
+ USART_InitStruct->USART_BaudRate = 9600;
+ USART_InitStruct->USART_WordLength = USART_WordLength_8b;
+ USART_InitStruct->USART_StopBits = USART_StopBits_1;
+ USART_InitStruct->USART_Parity = USART_Parity_No ;
+ USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
+ USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+}
+
+/**
+ * @brief Initializes the USARTx peripheral Clock according to the
+ * specified parameters in the USART_ClockInitStruct .
+ * @param USARTx: where x can be 1, 2, 3 to select the USART peripheral.
+ * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef
+ * structure that contains the configuration information for the specified
+ * USART peripheral.
+ * @note The Smart Card and Synchronous modes are not available for UART4 and UART5.
+ * @retval None
+ */
+void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct)
+{
+ uint32_t tmpreg = 0x00;
+ /* Check the parameters */
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock));
+ assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL));
+ assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA));
+ assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit));
+
+/*---------------------------- USART CR2 Configuration -----------------------*/
+ tmpreg = USARTx->CR2;
+ /* Clear CLKEN, CPOL, CPHA and LBCL bits */
+ tmpreg &= CR2_CLOCK_CLEAR_Mask;
+ /* Configure the USART Clock, CPOL, CPHA and LastBit ------------*/
+ /* Set CLKEN bit according to USART_Clock value */
+ /* Set CPOL bit according to USART_CPOL value */
+ /* Set CPHA bit according to USART_CPHA value */
+ /* Set LBCL bit according to USART_LastBit value */
+ tmpreg |= (uint32_t)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL |
+ USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit;
+ /* Write to USART CR2 */
+ USARTx->CR2 = (uint16_t)tmpreg;
+}
+
+/**
+ * @brief Fills each USART_ClockInitStruct member with its default value.
+ * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef
+ * structure which will be initialized.
+ * @retval None
+ */
+void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct)
+{
+ /* USART_ClockInitStruct members default value */
+ USART_ClockInitStruct->USART_Clock = USART_Clock_Disable;
+ USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low;
+ USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge;
+ USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable;
+}
+
+/**
+ * @brief Enables or disables the specified USART peripheral.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the USARTx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected USART by setting the UE bit in the CR1 register */
+ USARTx->CR1 |= CR1_UE_Set;
+ }
+ else
+ {
+ /* Disable the selected USART by clearing the UE bit in the CR1 register */
+ USARTx->CR1 &= CR1_UE_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified USART interrupts.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_IT: specifies the USART interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg USART_IT_LBD: LIN Break detection interrupt
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @param NewState: new state of the specified USARTx interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState)
+{
+ uint32_t usartreg = 0x00, itpos = 0x00, itmask = 0x00;
+ uint32_t usartxbase = 0x00;
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_CONFIG_IT(USART_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ /* The CTS interrupt is not available for UART4 and UART5 */
+ if (USART_IT == USART_IT_CTS)
+ {
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ }
+
+ usartxbase = (uint32_t)USARTx;
+
+ /* Get the USART register index */
+ usartreg = (((uint8_t)USART_IT) >> 0x05);
+
+ /* Get the interrupt position */
+ itpos = USART_IT & IT_Mask;
+ itmask = (((uint32_t)0x01) << itpos);
+
+ if (usartreg == 0x01) /* The IT is in CR1 register */
+ {
+ usartxbase += 0x0C;
+ }
+ else if (usartreg == 0x02) /* The IT is in CR2 register */
+ {
+ usartxbase += 0x10;
+ }
+ else /* The IT is in CR3 register */
+ {
+ usartxbase += 0x14;
+ }
+ if (NewState != DISABLE)
+ {
+ *(__IO uint32_t*)usartxbase |= itmask;
+ }
+ else
+ {
+ *(__IO uint32_t*)usartxbase &= ~itmask;
+ }
+}
+
+/**
+ * @brief Enables or disables the USART’s DMA interface.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_DMAReq: specifies the DMA request.
+ * This parameter can be any combination of the following values:
+ * @arg USART_DMAReq_Tx: USART DMA transmit request
+ * @arg USART_DMAReq_Rx: USART DMA receive request
+ * @param NewState: new state of the DMA Request sources.
+ * This parameter can be: ENABLE or DISABLE.
+ * @note The DMA mode is not available for UART5 except in the STM32
+ * High density value line devices(STM32F10X_HD_VL).
+ * @retval None
+ */
+void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_DMAREQ(USART_DMAReq));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the DMA transfer for selected requests by setting the DMAT and/or
+ DMAR bits in the USART CR3 register */
+ USARTx->CR3 |= USART_DMAReq;
+ }
+ else
+ {
+ /* Disable the DMA transfer for selected requests by clearing the DMAT and/or
+ DMAR bits in the USART CR3 register */
+ USARTx->CR3 &= (uint16_t)~USART_DMAReq;
+ }
+}
+
+/**
+ * @brief Sets the address of the USART node.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_Address: Indicates the address of the USART node.
+ * @retval None
+ */
+void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_ADDRESS(USART_Address));
+
+ /* Clear the USART address */
+ USARTx->CR2 &= CR2_Address_Mask;
+ /* Set the USART address node */
+ USARTx->CR2 |= USART_Address;
+}
+
+/**
+ * @brief Selects the USART WakeUp method.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_WakeUp: specifies the USART wakeup method.
+ * This parameter can be one of the following values:
+ * @arg USART_WakeUp_IdleLine: WakeUp by an idle line detection
+ * @arg USART_WakeUp_AddressMark: WakeUp by an address mark
+ * @retval None
+ */
+void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_WAKEUP(USART_WakeUp));
+
+ USARTx->CR1 &= CR1_WAKE_Mask;
+ USARTx->CR1 |= USART_WakeUp;
+}
+
+/**
+ * @brief Determines if the USART is in mute mode or not.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the USART mute mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the USART mute mode by setting the RWU bit in the CR1 register */
+ USARTx->CR1 |= CR1_RWU_Set;
+ }
+ else
+ {
+ /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */
+ USARTx->CR1 &= CR1_RWU_Reset;
+ }
+}
+
+/**
+ * @brief Sets the USART LIN Break detection length.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_LINBreakDetectLength: specifies the LIN break detection length.
+ * This parameter can be one of the following values:
+ * @arg USART_LINBreakDetectLength_10b: 10-bit break detection
+ * @arg USART_LINBreakDetectLength_11b: 11-bit break detection
+ * @retval None
+ */
+void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_LIN_BREAK_DETECT_LENGTH(USART_LINBreakDetectLength));
+
+ USARTx->CR2 &= CR2_LBDL_Mask;
+ USARTx->CR2 |= USART_LINBreakDetectLength;
+}
+
+/**
+ * @brief Enables or disables the USART’s LIN mode.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the USART LIN mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the LIN mode by setting the LINEN bit in the CR2 register */
+ USARTx->CR2 |= CR2_LINEN_Set;
+ }
+ else
+ {
+ /* Disable the LIN mode by clearing the LINEN bit in the CR2 register */
+ USARTx->CR2 &= CR2_LINEN_Reset;
+ }
+}
+
+/**
+ * @brief Transmits single data through the USARTx peripheral.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param Data: the data to transmit.
+ * @retval None
+ */
+void USART_SendData(USART_TypeDef* USARTx, uint16_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_DATA(Data));
+
+ /* Transmit Data */
+ USARTx->DR = (Data & (uint16_t)0x01FF);
+}
+
+/**
+ * @brief Returns the most recent received data by the USARTx peripheral.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @retval The received data.
+ */
+uint16_t USART_ReceiveData(USART_TypeDef* USARTx)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+
+ /* Receive Data */
+ return (uint16_t)(USARTx->DR & (uint16_t)0x01FF);
+}
+
+/**
+ * @brief Transmits break characters.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @retval None
+ */
+void USART_SendBreak(USART_TypeDef* USARTx)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+
+ /* Send break characters */
+ USARTx->CR1 |= CR1_SBK_Set;
+}
+
+/**
+ * @brief Sets the specified USART guard time.
+ * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral.
+ * @param USART_GuardTime: specifies the guard time.
+ * @note The guard time bits are not available for UART4 and UART5.
+ * @retval None
+ */
+void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_123_PERIPH(USARTx));
+
+ /* Clear the USART Guard time */
+ USARTx->GTPR &= GTPR_LSB_Mask;
+ /* Set the USART guard time */
+ USARTx->GTPR |= (uint16_t)((uint16_t)USART_GuardTime << 0x08);
+}
+
+/**
+ * @brief Sets the system clock prescaler.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_Prescaler: specifies the prescaler clock.
+ * @note The function is used for IrDA mode with UART4 and UART5.
+ * @retval None
+ */
+void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+
+ /* Clear the USART prescaler */
+ USARTx->GTPR &= GTPR_MSB_Mask;
+ /* Set the USART prescaler */
+ USARTx->GTPR |= USART_Prescaler;
+}
+
+/**
+ * @brief Enables or disables the USART’s Smart Card mode.
+ * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral.
+ * @param NewState: new state of the Smart Card mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @note The Smart Card mode is not available for UART4 and UART5.
+ * @retval None
+ */
+void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the SC mode by setting the SCEN bit in the CR3 register */
+ USARTx->CR3 |= CR3_SCEN_Set;
+ }
+ else
+ {
+ /* Disable the SC mode by clearing the SCEN bit in the CR3 register */
+ USARTx->CR3 &= CR3_SCEN_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables NACK transmission.
+ * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral.
+ * @param NewState: new state of the NACK transmission.
+ * This parameter can be: ENABLE or DISABLE.
+ * @note The Smart Card mode is not available for UART4 and UART5.
+ * @retval None
+ */
+void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the NACK transmission by setting the NACK bit in the CR3 register */
+ USARTx->CR3 |= CR3_NACK_Set;
+ }
+ else
+ {
+ /* Disable the NACK transmission by clearing the NACK bit in the CR3 register */
+ USARTx->CR3 &= CR3_NACK_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the USART’s Half Duplex communication.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the USART Communication.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */
+ USARTx->CR3 |= CR3_HDSEL_Set;
+ }
+ else
+ {
+ /* Disable the Half-Duplex mode by clearing the HDSEL bit in the CR3 register */
+ USARTx->CR3 &= CR3_HDSEL_Reset;
+ }
+}
+
+
+/**
+ * @brief Enables or disables the USART's 8x oversampling mode.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the USART one bit sampling method.
+ * This parameter can be: ENABLE or DISABLE.
+ * @note
+ * This function has to be called before calling USART_Init()
+ * function in order to have correct baudrate Divider value.
+ * @retval None
+ */
+void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the 8x Oversampling mode by setting the OVER8 bit in the CR1 register */
+ USARTx->CR1 |= CR1_OVER8_Set;
+ }
+ else
+ {
+ /* Disable the 8x Oversampling mode by clearing the OVER8 bit in the CR1 register */
+ USARTx->CR1 &= CR1_OVER8_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the USART's one bit sampling method.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the USART one bit sampling method.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the one bit method by setting the ONEBITE bit in the CR3 register */
+ USARTx->CR3 |= CR3_ONEBITE_Set;
+ }
+ else
+ {
+ /* Disable tthe one bit method by clearing the ONEBITE bit in the CR3 register */
+ USARTx->CR3 &= CR3_ONEBITE_Reset;
+ }
+}
+
+/**
+ * @brief Configures the USART's IrDA interface.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_IrDAMode: specifies the IrDA mode.
+ * This parameter can be one of the following values:
+ * @arg USART_IrDAMode_LowPower
+ * @arg USART_IrDAMode_Normal
+ * @retval None
+ */
+void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_IRDA_MODE(USART_IrDAMode));
+
+ USARTx->CR3 &= CR3_IRLP_Mask;
+ USARTx->CR3 |= USART_IrDAMode;
+}
+
+/**
+ * @brief Enables or disables the USART's IrDA interface.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the IrDA mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the IrDA mode by setting the IREN bit in the CR3 register */
+ USARTx->CR3 |= CR3_IREN_Set;
+ }
+ else
+ {
+ /* Disable the IrDA mode by clearing the IREN bit in the CR3 register */
+ USARTx->CR3 &= CR3_IREN_Reset;
+ }
+}
+
+/**
+ * @brief Checks whether the specified USART flag is set or not.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
+ * @arg USART_FLAG_LBD: LIN Break detection flag
+ * @arg USART_FLAG_TXE: Transmit data register empty flag
+ * @arg USART_FLAG_TC: Transmission Complete flag
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag
+ * @arg USART_FLAG_IDLE: Idle Line detection flag
+ * @arg USART_FLAG_ORE: OverRun Error flag
+ * @arg USART_FLAG_NE: Noise Error flag
+ * @arg USART_FLAG_FE: Framing Error flag
+ * @arg USART_FLAG_PE: Parity Error flag
+ * @retval The new state of USART_FLAG (SET or RESET).
+ */
+FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_FLAG(USART_FLAG));
+ /* The CTS flag is not available for UART4 and UART5 */
+ if (USART_FLAG == USART_FLAG_CTS)
+ {
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ }
+
+ if ((USARTx->SR & USART_FLAG) != (uint16_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the USARTx's pending flags.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_FLAG: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5).
+ * @arg USART_FLAG_LBD: LIN Break detection flag.
+ * @arg USART_FLAG_TC: Transmission Complete flag.
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note
+ * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register (USART_GetFlagStatus())
+ * followed by a read operation to USART_DR register (USART_ReceiveData()).
+ * - RXNE flag can be also cleared by a read to the USART_DR register
+ * (USART_ReceiveData()).
+ * - TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register (USART_GetFlagStatus()) followed by a write operation
+ * to USART_DR register (USART_SendData()).
+ * - TXE flag is cleared only by a write to the USART_DR register
+ * (USART_SendData()).
+ * @retval None
+ */
+void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_CLEAR_FLAG(USART_FLAG));
+ /* The CTS flag is not available for UART4 and UART5 */
+ if ((USART_FLAG & USART_FLAG_CTS) == USART_FLAG_CTS)
+ {
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ }
+
+ USARTx->SR = (uint16_t)~USART_FLAG;
+}
+
+/**
+ * @brief Checks whether the specified USART interrupt has occurred or not.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_IT: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg USART_IT_LBD: LIN Break detection interrupt
+ * @arg USART_IT_TXE: Tansmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ORE: OverRun Error interrupt
+ * @arg USART_IT_NE: Noise Error interrupt
+ * @arg USART_IT_FE: Framing Error interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @retval The new state of USART_IT (SET or RESET).
+ */
+ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT)
+{
+ uint32_t bitpos = 0x00, itmask = 0x00, usartreg = 0x00;
+ ITStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_GET_IT(USART_IT));
+ /* The CTS interrupt is not available for UART4 and UART5 */
+ if (USART_IT == USART_IT_CTS)
+ {
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ }
+
+ /* Get the USART register index */
+ usartreg = (((uint8_t)USART_IT) >> 0x05);
+ /* Get the interrupt position */
+ itmask = USART_IT & IT_Mask;
+ itmask = (uint32_t)0x01 << itmask;
+
+ if (usartreg == 0x01) /* The IT is in CR1 register */
+ {
+ itmask &= USARTx->CR1;
+ }
+ else if (usartreg == 0x02) /* The IT is in CR2 register */
+ {
+ itmask &= USARTx->CR2;
+ }
+ else /* The IT is in CR3 register */
+ {
+ itmask &= USARTx->CR3;
+ }
+
+ bitpos = USART_IT >> 0x08;
+ bitpos = (uint32_t)0x01 << bitpos;
+ bitpos &= USARTx->SR;
+ if ((itmask != (uint16_t)RESET)&&(bitpos != (uint16_t)RESET))
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the USARTx's interrupt pending bits.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_IT: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg USART_IT_LBD: LIN Break detection interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt.
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt.
+ *
+ * @note
+ * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
+ * error) and IDLE (Idle line detected) pending bits are cleared by
+ * software sequence: a read operation to USART_SR register
+ * (USART_GetITStatus()) followed by a read operation to USART_DR register
+ * (USART_ReceiveData()).
+ * - RXNE pending bit can be also cleared by a read to the USART_DR register
+ * (USART_ReceiveData()).
+ * - TC pending bit can be also cleared by software sequence: a read
+ * operation to USART_SR register (USART_GetITStatus()) followed by a write
+ * operation to USART_DR register (USART_SendData()).
+ * - TXE pending bit is cleared only by a write to the USART_DR register
+ * (USART_SendData()).
+ * @retval None
+ */
+void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT)
+{
+ uint16_t bitpos = 0x00, itmask = 0x00;
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_CLEAR_IT(USART_IT));
+ /* The CTS interrupt is not available for UART4 and UART5 */
+ if (USART_IT == USART_IT_CTS)
+ {
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ }
+
+ bitpos = USART_IT >> 0x08;
+ itmask = ((uint16_t)0x01 << (uint16_t)bitpos);
+ USARTx->SR = (uint16_t)~itmask;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_wwdg.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_wwdg.c
new file mode 100644
index 00000000..77a7ce51
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/SPL/src/stm32f10x_wwdg.c
@@ -0,0 +1,224 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_wwdg.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the WWDG firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_wwdg.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup WWDG
+ * @brief WWDG driver modules
+ * @{
+ */
+
+/** @defgroup WWDG_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Private_Defines
+ * @{
+ */
+
+/* ----------- WWDG registers bit address in the alias region ----------- */
+#define WWDG_OFFSET (WWDG_BASE - PERIPH_BASE)
+
+/* Alias word address of EWI bit */
+#define CFR_OFFSET (WWDG_OFFSET + 0x04)
+#define EWI_BitNumber 0x09
+#define CFR_EWI_BB (PERIPH_BB_BASE + (CFR_OFFSET * 32) + (EWI_BitNumber * 4))
+
+/* --------------------- WWDG registers bit mask ------------------------ */
+
+/* CR register bit mask */
+#define CR_WDGA_Set ((uint32_t)0x00000080)
+
+/* CFR register bit mask */
+#define CFR_WDGTB_Mask ((uint32_t)0xFFFFFE7F)
+#define CFR_W_Mask ((uint32_t)0xFFFFFF80)
+#define BIT_Mask ((uint8_t)0x7F)
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the WWDG peripheral registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void WWDG_DeInit(void)
+{
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, DISABLE);
+}
+
+/**
+ * @brief Sets the WWDG Prescaler.
+ * @param WWDG_Prescaler: specifies the WWDG Prescaler.
+ * This parameter can be one of the following values:
+ * @arg WWDG_Prescaler_1: WWDG counter clock = (PCLK1/4096)/1
+ * @arg WWDG_Prescaler_2: WWDG counter clock = (PCLK1/4096)/2
+ * @arg WWDG_Prescaler_4: WWDG counter clock = (PCLK1/4096)/4
+ * @arg WWDG_Prescaler_8: WWDG counter clock = (PCLK1/4096)/8
+ * @retval None
+ */
+void WWDG_SetPrescaler(uint32_t WWDG_Prescaler)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_WWDG_PRESCALER(WWDG_Prescaler));
+ /* Clear WDGTB[1:0] bits */
+ tmpreg = WWDG->CFR & CFR_WDGTB_Mask;
+ /* Set WDGTB[1:0] bits according to WWDG_Prescaler value */
+ tmpreg |= WWDG_Prescaler;
+ /* Store the new value */
+ WWDG->CFR = tmpreg;
+}
+
+/**
+ * @brief Sets the WWDG window value.
+ * @param WindowValue: specifies the window value to be compared to the downcounter.
+ * This parameter value must be lower than 0x80.
+ * @retval None
+ */
+void WWDG_SetWindowValue(uint8_t WindowValue)
+{
+ __IO uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_WWDG_WINDOW_VALUE(WindowValue));
+ /* Clear W[6:0] bits */
+
+ tmpreg = WWDG->CFR & CFR_W_Mask;
+
+ /* Set W[6:0] bits according to WindowValue value */
+ tmpreg |= WindowValue & (uint32_t) BIT_Mask;
+
+ /* Store the new value */
+ WWDG->CFR = tmpreg;
+}
+
+/**
+ * @brief Enables the WWDG Early Wakeup interrupt(EWI).
+ * @param None
+ * @retval None
+ */
+void WWDG_EnableIT(void)
+{
+ *(__IO uint32_t *) CFR_EWI_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Sets the WWDG counter value.
+ * @param Counter: specifies the watchdog counter value.
+ * This parameter must be a number between 0x40 and 0x7F.
+ * @retval None
+ */
+void WWDG_SetCounter(uint8_t Counter)
+{
+ /* Check the parameters */
+ assert_param(IS_WWDG_COUNTER(Counter));
+ /* Write to T[6:0] bits to configure the counter value, no need to do
+ a read-modify-write; writing a 0 to WDGA bit does nothing */
+ WWDG->CR = Counter & BIT_Mask;
+}
+
+/**
+ * @brief Enables WWDG and load the counter value.
+ * @param Counter: specifies the watchdog counter value.
+ * This parameter must be a number between 0x40 and 0x7F.
+ * @retval None
+ */
+void WWDG_Enable(uint8_t Counter)
+{
+ /* Check the parameters */
+ assert_param(IS_WWDG_COUNTER(Counter));
+ WWDG->CR = CR_WDGA_Set | Counter;
+}
+
+/**
+ * @brief Checks whether the Early Wakeup interrupt flag is set or not.
+ * @param None
+ * @retval The new state of the Early Wakeup interrupt flag (SET or RESET)
+ */
+FlagStatus WWDG_GetFlagStatus(void)
+{
+ return (FlagStatus)(WWDG->SR);
+}
+
+/**
+ * @brief Clears Early Wakeup interrupt flag.
+ * @param None
+ * @retval None
+ */
+void WWDG_ClearFlag(void)
+{
+ WWDG->SR = (uint32_t)RESET;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/Release_Notes.html b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/Release_Notes.html
new file mode 100644
index 00000000..ea06ab2c
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/Release_Notes.html
@@ -0,0 +1,877 @@
+
+
+
+
+
+
+
+
+
+
+
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_core.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_core.h
new file mode 100644
index 00000000..2e4419b1
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_core.h
@@ -0,0 +1,246 @@
+/******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+* File Name : usb_core.h
+* Author : MCD Application Team
+* Version : V3.3.0
+* Date : 21-March-2011
+* Description : Standard protocol processing functions prototypes
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_CORE_H
+#define __USB_CORE_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+typedef enum _CONTROL_STATE
+{
+ WAIT_SETUP, /* 0 */
+ SETTING_UP, /* 1 */
+ IN_DATA, /* 2 */
+ OUT_DATA, /* 3 */
+ LAST_IN_DATA, /* 4 */
+ LAST_OUT_DATA, /* 5 */
+ WAIT_STATUS_IN, /* 7 */
+ WAIT_STATUS_OUT, /* 8 */
+ STALLED, /* 9 */
+ PAUSE /* 10 */
+} CONTROL_STATE; /* The state machine states of a control pipe */
+
+typedef struct OneDescriptor
+{
+ uint8_t *Descriptor;
+ uint16_t Descriptor_Size;
+}
+ONE_DESCRIPTOR, *PONE_DESCRIPTOR;
+/* All the request process routines return a value of this type
+ If the return value is not SUCCESS or NOT_READY,
+ the software will STALL the correspond endpoint */
+typedef enum _RESULT
+{
+ USB_SUCCESS = 0, /* Process successfully */
+ USB_ERROR,
+ USB_UNSUPPORT,
+ USB_NOT_READY /* The process has not been finished, endpoint will be
+ NAK to further request */
+} RESULT;
+
+
+/*-*-*-*-*-*-*-*-*-*-* Definitions for endpoint level -*-*-*-*-*-*-*-*-*-*-*-*/
+typedef struct _ENDPOINT_INFO
+{
+ /* When send data out of the device,
+ CopyData() is used to get data buffer 'Length' bytes data
+ if Length is 0,
+ CopyData() returns the total length of the data
+ if the request is not supported, returns 0
+ (NEW Feature )
+ if CopyData() returns -1, the calling routine should not proceed
+ further and will resume the SETUP process by the class device
+ if Length is not 0,
+ CopyData() returns a pointer to indicate the data location
+ Usb_wLength is the data remain to be sent,
+ Usb_wOffset is the Offset of original data
+ When receive data from the host,
+ CopyData() is used to get user data buffer which is capable
+ of Length bytes data to copy data from the endpoint buffer.
+ if Length is 0,
+ CopyData() returns the available data length,
+ if Length is not 0,
+ CopyData() returns user buffer address
+ Usb_rLength is the data remain to be received,
+ Usb_rPointer is the Offset of data buffer
+ */
+ uint16_t Usb_wLength;
+ uint16_t Usb_wOffset;
+ uint16_t PacketSize;
+ uint8_t *(*CopyData)(uint16_t Length);
+}ENDPOINT_INFO;
+
+/*-*-*-*-*-*-*-*-*-*-*-* Definitions for device level -*-*-*-*-*-*-*-*-*-*-*-*/
+
+typedef struct _DEVICE
+{
+ uint8_t Total_Endpoint; /* Number of endpoints that are used */
+ uint8_t Total_Configuration;/* Number of configuration available */
+}
+DEVICE;
+
+typedef union
+{
+ uint16_t w;
+ struct BW
+ {
+ uint8_t bb1;
+ uint8_t bb0;
+ }
+ bw;
+} uint16_t_uint8_t;
+
+typedef struct _DEVICE_INFO
+{
+ uint8_t USBbmRequestType; /* bmRequestType */
+ uint8_t USBbRequest; /* bRequest */
+ uint16_t_uint8_t USBwValues; /* wValue */
+ uint16_t_uint8_t USBwIndexs; /* wIndex */
+ uint16_t_uint8_t USBwLengths; /* wLength */
+
+ uint8_t ControlState; /* of type CONTROL_STATE */
+ uint8_t Current_Feature;
+ uint8_t Current_Configuration; /* Selected configuration */
+ uint8_t Current_Interface; /* Selected interface of current configuration */
+ uint8_t Current_AlternateSetting;/* Selected Alternate Setting of current
+ interface*/
+
+ ENDPOINT_INFO Ctrl_Info;
+}DEVICE_INFO;
+
+typedef struct _DEVICE_PROP
+{
+ void (*Init)(void); /* Initialize the device */
+ void (*Reset)(void); /* Reset routine of this device */
+
+ /* Device dependent process after the status stage */
+ void (*Process_Status_IN)(void);
+ void (*Process_Status_OUT)(void);
+
+ /* Procedure of process on setup stage of a class specified request with data stage */
+ /* All class specified requests with data stage are processed in Class_Data_Setup
+ Class_Data_Setup()
+ responses to check all special requests and fills ENDPOINT_INFO
+ according to the request
+ If IN tokens are expected, then wLength & wOffset will be filled
+ with the total transferring bytes and the starting position
+ If OUT tokens are expected, then rLength & rOffset will be filled
+ with the total expected bytes and the starting position in the buffer
+
+ If the request is valid, Class_Data_Setup returns SUCCESS, else UNSUPPORT
+
+ CAUTION:
+ Since GET_CONFIGURATION & GET_INTERFACE are highly related to
+ the individual classes, they will be checked and processed here.
+ */
+ RESULT (*Class_Data_Setup)(uint8_t RequestNo);
+
+ /* Procedure of process on setup stage of a class specified request without data stage */
+ /* All class specified requests without data stage are processed in Class_NoData_Setup
+ Class_NoData_Setup
+ responses to check all special requests and perform the request
+
+ CAUTION:
+ Since SET_CONFIGURATION & SET_INTERFACE are highly related to
+ the individual classes, they will be checked and processed here.
+ */
+ RESULT (*Class_NoData_Setup)(uint8_t RequestNo);
+
+ /*Class_Get_Interface_Setting
+ This function is used by the file usb_core.c to test if the selected Interface
+ and Alternate Setting (uint8_t Interface, uint8_t AlternateSetting) are supported by
+ the application.
+ This function is writing by user. It should return "SUCCESS" if the Interface
+ and Alternate Setting are supported by the application or "UNSUPPORT" if they
+ are not supported. */
+
+ RESULT (*Class_Get_Interface_Setting)(uint8_t Interface, uint8_t AlternateSetting);
+
+ uint8_t* (*GetDeviceDescriptor)(uint16_t Length);
+ uint8_t* (*GetConfigDescriptor)(uint16_t Length);
+ uint8_t* (*GetStringDescriptor)(uint16_t Length);
+
+ /* This field is not used in current library version. It is kept only for
+ compatibility with previous versions */
+ void* RxEP_buffer;
+
+ uint8_t MaxPacketSize;
+
+}DEVICE_PROP;
+
+typedef struct _USER_STANDARD_REQUESTS
+{
+ void (*User_GetConfiguration)(void); /* Get Configuration */
+ void (*User_SetConfiguration)(void); /* Set Configuration */
+ void (*User_GetInterface)(void); /* Get Interface */
+ void (*User_SetInterface)(void); /* Set Interface */
+ void (*User_GetStatus)(void); /* Get Status */
+ void (*User_ClearFeature)(void); /* Clear Feature */
+ void (*User_SetEndPointFeature)(void); /* Set Endpoint Feature */
+ void (*User_SetDeviceFeature)(void); /* Set Device Feature */
+ void (*User_SetDeviceAddress)(void); /* Set Device Address */
+}
+USER_STANDARD_REQUESTS;
+
+/* Exported constants --------------------------------------------------------*/
+#define Type_Recipient (pInformation->USBbmRequestType & (REQUEST_TYPE | RECIPIENT))
+
+#define Usb_rLength Usb_wLength
+#define Usb_rOffset Usb_wOffset
+
+#define USBwValue USBwValues.w
+#define USBwValue0 USBwValues.bw.bb0
+#define USBwValue1 USBwValues.bw.bb1
+#define USBwIndex USBwIndexs.w
+#define USBwIndex0 USBwIndexs.bw.bb0
+#define USBwIndex1 USBwIndexs.bw.bb1
+#define USBwLength USBwLengths.w
+#define USBwLength0 USBwLengths.bw.bb0
+#define USBwLength1 USBwLengths.bw.bb1
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+uint8_t Setup0_Process(void);
+uint8_t Post0_Process(void);
+uint8_t Out0_Process(void);
+uint8_t In0_Process(void);
+
+RESULT Standard_SetEndPointFeature(void);
+RESULT Standard_SetDeviceFeature(void);
+
+uint8_t *Standard_GetConfiguration(uint16_t Length);
+RESULT Standard_SetConfiguration(void);
+uint8_t *Standard_GetInterface(uint16_t Length);
+RESULT Standard_SetInterface(void);
+uint8_t *Standard_GetDescriptorData(uint16_t Length, PONE_DESCRIPTOR pDesc);
+
+uint8_t *Standard_GetStatus(uint16_t Length);
+RESULT Standard_ClearFeature(void);
+void SetDeviceAddress(uint8_t);
+void NOP_Process(void);
+
+extern DEVICE_PROP Device_Property;
+extern USER_STANDARD_REQUESTS User_Standard_Requests;
+extern DEVICE Device_Table;
+extern DEVICE_INFO Device_Info;
+
+/* cells saving status during interrupt servicing */
+extern __IO uint16_t SaveRState;
+extern __IO uint16_t SaveTState;
+
+#endif /* __USB_CORE_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_def.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_def.h
new file mode 100644
index 00000000..f5808ef7
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_def.h
@@ -0,0 +1,80 @@
+/******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+* File Name : usb_def.h
+* Author : MCD Application Team
+* Version : V3.3.0
+* Date : 21-March-2011
+* Description : Definitions related to USB Core
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_DEF_H
+#define __USB_DEF_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+typedef enum _RECIPIENT_TYPE
+{
+ DEVICE_RECIPIENT, /* Recipient device */
+ INTERFACE_RECIPIENT, /* Recipient interface */
+ ENDPOINT_RECIPIENT, /* Recipient endpoint */
+ OTHER_RECIPIENT
+} RECIPIENT_TYPE;
+
+
+typedef enum _STANDARD_REQUESTS
+{
+ GET_STATUS = 0,
+ CLEAR_FEATURE,
+ RESERVED1,
+ SET_FEATURE,
+ RESERVED2,
+ SET_ADDRESS,
+ GET_DESCRIPTOR,
+ SET_DESCRIPTOR,
+ GET_CONFIGURATION,
+ SET_CONFIGURATION,
+ GET_INTERFACE,
+ SET_INTERFACE,
+ TOTAL_sREQUEST, /* Total number of Standard request */
+ SYNCH_FRAME = 12
+} STANDARD_REQUESTS;
+
+/* Definition of "USBwValue" */
+typedef enum _DESCRIPTOR_TYPE
+{
+ DEVICE_DESCRIPTOR = 1,
+ CONFIG_DESCRIPTOR,
+ STRING_DESCRIPTOR,
+ INTERFACE_DESCRIPTOR,
+ ENDPOINT_DESCRIPTOR
+} DESCRIPTOR_TYPE;
+
+/* Feature selector of a SET_FEATURE or CLEAR_FEATURE */
+typedef enum _FEATURE_SELECTOR
+{
+ ENDPOINT_STALL,
+ DEVICE_REMOTE_WAKEUP
+} FEATURE_SELECTOR;
+
+/* Exported constants --------------------------------------------------------*/
+/* Definition of "USBbmRequestType" */
+#define REQUEST_TYPE 0x60 /* Mask to get request type */
+#define STANDARD_REQUEST 0x00 /* Standard request */
+#define CLASS_REQUEST 0x20 /* Class request */
+#define VENDOR_REQUEST 0x40 /* Vendor request */
+
+#define RECIPIENT 0x1F /* Mask to get recipient */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+#endif /* __USB_DEF_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_init.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_init.h
new file mode 100644
index 00000000..cceb06a8
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_init.h
@@ -0,0 +1,49 @@
+/******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+* File Name : usb_init.h
+* Author : MCD Application Team
+* Version : V3.3.0
+* Date : 21-March-2011
+* Description : Initialization routines & global variables
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_INIT_H
+#define __USB_INIT_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+void USB_Init(void);
+
+/* External variables --------------------------------------------------------*/
+/* The number of current endpoint, it will be used to specify an endpoint */
+extern uint8_t EPindex;
+/* The number of current device, it is an index to the Device_Table */
+/*extern uint8_t Device_no; */
+/* Points to the DEVICE_INFO structure of current device */
+/* The purpose of this register is to speed up the execution */
+extern DEVICE_INFO* pInformation;
+/* Points to the DEVICE_PROP structure of current device */
+/* The purpose of this register is to speed up the execution */
+extern DEVICE_PROP* pProperty;
+/* Temporary save the state of Rx & Tx status. */
+/* Whenever the Rx or Tx state is changed, its value is saved */
+/* in this variable first and will be set to the EPRB or EPRA */
+/* at the end of interrupt process */
+extern USER_STANDARD_REQUESTS *pUser_Standard_Requests;
+
+extern uint16_t SaveState ;
+extern uint16_t wInterrupt_Mask;
+
+#endif /* __USB_INIT_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_int.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_int.h
new file mode 100644
index 00000000..39b6dc78
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_int.h
@@ -0,0 +1,33 @@
+/******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+* File Name : usb_int.h
+* Author : MCD Application Team
+* Version : V3.3.0
+* Date : 21-March-2011
+* Description : Endpoint CTR (Low and High) interrupt's service routines
+* prototypes
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_INT_H
+#define __USB_INT_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+void CTR_LP(void);
+void CTR_HP(void);
+
+/* External variables --------------------------------------------------------*/
+
+#endif /* __USB_INT_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_lib.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_lib.h
new file mode 100644
index 00000000..b65ba0d2
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_lib.h
@@ -0,0 +1,55 @@
+/******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+* File Name : usb_lib.h
+* Author : MCD Application Team
+* Version : V3.3.0
+* Date : 21-March-2011
+* Description : USB library include files
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_LIB_H
+#define __USB_LIB_H
+
+/* Includes ------------------------------------------------------------------*/
+#ifdef STM32L1XX_MD
+#include "stm32l1xx.h"
+#else
+#include "stm32f10x.h"
+#endif /* STM32L1XX_MD */
+
+#include "usb_type.h"
+#include "usb_regs.h"
+#include "usb_def.h"
+#include "usb_core.h"
+#include "usb_init.h"
+#ifndef STM32F10X_CL
+ #include "usb_mem.h"
+ #include "usb_int.h"
+#endif /* STM32F10X_CL */
+
+#include "usb_sil.h"
+
+#ifdef STM32F10X_CL
+ #include "otgd_fs_cal.h"
+ #include "otgd_fs_pcd.h"
+ #include "otgd_fs_dev.h"
+ #include "otgd_fs_int.h"
+#endif /* STM32F10X_CL */
+
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+/* External variables --------------------------------------------------------*/
+
+#endif /* __USB_LIB_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_mem.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_mem.h
new file mode 100644
index 00000000..e0ca32cb
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_mem.h
@@ -0,0 +1,32 @@
+/******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+* File Name : usb_mem.h
+* Author : MCD Application Team
+* Version : V3.3.0
+* Date : 21-March-2011
+* Description : Utility prototypes functions for memory/PMA transfers
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_MEM_H
+#define __USB_MEM_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+void UserToPMABufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
+void PMAToUserBufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
+
+/* External variables --------------------------------------------------------*/
+
+#endif /*__USB_MEM_H*/
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_regs.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_regs.h
new file mode 100644
index 00000000..795d8e67
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_regs.h
@@ -0,0 +1,671 @@
+/******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+* File Name : usb_regs.h
+* Author : MCD Application Team
+* Version : V3.3.0
+* Date : 21-March-2011
+* Description : Interface prototype functions to USB cell registers
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_REGS_H
+#define __USB_REGS_H
+
+#ifndef STM32F10X_CL
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+typedef enum _EP_DBUF_DIR
+{
+ /* double buffered endpoint direction */
+ EP_DBUF_ERR,
+ EP_DBUF_OUT,
+ EP_DBUF_IN
+}EP_DBUF_DIR;
+
+/* endpoint buffer number */
+enum EP_BUF_NUM
+{
+ EP_NOBUF,
+ EP_BUF0,
+ EP_BUF1
+};
+
+/* Exported constants --------------------------------------------------------*/
+#define RegBase (0x40005C00L) /* USB_IP Peripheral Registers base address */
+#define PMAAddr (0x40006000L) /* USB_IP Packet Memory Area base address */
+
+/******************************************************************************/
+/* General registers */
+/******************************************************************************/
+
+/* Control register */
+#define CNTR ((__IO unsigned *)(RegBase + 0x40))
+/* Interrupt status register */
+#define ISTR ((__IO unsigned *)(RegBase + 0x44))
+/* Frame number register */
+#define FNR ((__IO unsigned *)(RegBase + 0x48))
+/* Device address register */
+#define DADDR ((__IO unsigned *)(RegBase + 0x4C))
+/* Buffer Table address register */
+#define BTABLE ((__IO unsigned *)(RegBase + 0x50))
+/******************************************************************************/
+/* Endpoint registers */
+/******************************************************************************/
+#define EP0REG ((__IO unsigned *)(RegBase)) /* endpoint 0 register address */
+
+/* Endpoint Addresses (w/direction) */
+#define EP0_OUT ((uint8_t)0x00)
+#define EP0_IN ((uint8_t)0x80)
+#define EP1_OUT ((uint8_t)0x01)
+#define EP1_IN ((uint8_t)0x81)
+#define EP2_OUT ((uint8_t)0x02)
+#define EP2_IN ((uint8_t)0x82)
+#define EP3_OUT ((uint8_t)0x03)
+#define EP3_IN ((uint8_t)0x83)
+#define EP4_OUT ((uint8_t)0x04)
+#define EP4_IN ((uint8_t)0x84)
+#define EP5_OUT ((uint8_t)0x05)
+#define EP5_IN ((uint8_t)0x85)
+#define EP6_OUT ((uint8_t)0x06)
+#define EP6_IN ((uint8_t)0x86)
+#define EP7_OUT ((uint8_t)0x07)
+#define EP7_IN ((uint8_t)0x87)
+
+/* endpoints enumeration */
+#define ENDP0 ((uint8_t)0)
+#define ENDP1 ((uint8_t)1)
+#define ENDP2 ((uint8_t)2)
+#define ENDP3 ((uint8_t)3)
+#define ENDP4 ((uint8_t)4)
+#define ENDP5 ((uint8_t)5)
+#define ENDP6 ((uint8_t)6)
+#define ENDP7 ((uint8_t)7)
+
+/******************************************************************************/
+/* ISTR interrupt events */
+/******************************************************************************/
+#define ISTR_CTR (0x8000) /* Correct TRansfer (clear-only bit) */
+#define ISTR_DOVR (0x4000) /* DMA OVeR/underrun (clear-only bit) */
+#define ISTR_ERR (0x2000) /* ERRor (clear-only bit) */
+#define ISTR_WKUP (0x1000) /* WaKe UP (clear-only bit) */
+#define ISTR_SUSP (0x0800) /* SUSPend (clear-only bit) */
+#define ISTR_RESET (0x0400) /* RESET (clear-only bit) */
+#define ISTR_SOF (0x0200) /* Start Of Frame (clear-only bit) */
+#define ISTR_ESOF (0x0100) /* Expected Start Of Frame (clear-only bit) */
+
+
+#define ISTR_DIR (0x0010) /* DIRection of transaction (read-only bit) */
+#define ISTR_EP_ID (0x000F) /* EndPoint IDentifier (read-only bit) */
+
+#define CLR_CTR (~ISTR_CTR) /* clear Correct TRansfer bit */
+#define CLR_DOVR (~ISTR_DOVR) /* clear DMA OVeR/underrun bit*/
+#define CLR_ERR (~ISTR_ERR) /* clear ERRor bit */
+#define CLR_WKUP (~ISTR_WKUP) /* clear WaKe UP bit */
+#define CLR_SUSP (~ISTR_SUSP) /* clear SUSPend bit */
+#define CLR_RESET (~ISTR_RESET) /* clear RESET bit */
+#define CLR_SOF (~ISTR_SOF) /* clear Start Of Frame bit */
+#define CLR_ESOF (~ISTR_ESOF) /* clear Expected Start Of Frame bit */
+
+/******************************************************************************/
+/* CNTR control register bits definitions */
+/******************************************************************************/
+#define CNTR_CTRM (0x8000) /* Correct TRansfer Mask */
+#define CNTR_DOVRM (0x4000) /* DMA OVeR/underrun Mask */
+#define CNTR_ERRM (0x2000) /* ERRor Mask */
+#define CNTR_WKUPM (0x1000) /* WaKe UP Mask */
+#define CNTR_SUSPM (0x0800) /* SUSPend Mask */
+#define CNTR_RESETM (0x0400) /* RESET Mask */
+#define CNTR_SOFM (0x0200) /* Start Of Frame Mask */
+#define CNTR_ESOFM (0x0100) /* Expected Start Of Frame Mask */
+
+
+#define CNTR_RESUME (0x0010) /* RESUME request */
+#define CNTR_FSUSP (0x0008) /* Force SUSPend */
+#define CNTR_LPMODE (0x0004) /* Low-power MODE */
+#define CNTR_PDWN (0x0002) /* Power DoWN */
+#define CNTR_FRES (0x0001) /* Force USB RESet */
+
+/******************************************************************************/
+/* FNR Frame Number Register bit definitions */
+/******************************************************************************/
+#define FNR_RXDP (0x8000) /* status of D+ data line */
+#define FNR_RXDM (0x4000) /* status of D- data line */
+#define FNR_LCK (0x2000) /* LoCKed */
+#define FNR_LSOF (0x1800) /* Lost SOF */
+#define FNR_FN (0x07FF) /* Frame Number */
+/******************************************************************************/
+/* DADDR Device ADDRess bit definitions */
+/******************************************************************************/
+#define DADDR_EF (0x80)
+#define DADDR_ADD (0x7F)
+/******************************************************************************/
+/* Endpoint register */
+/******************************************************************************/
+/* bit positions */
+#define EP_CTR_RX (0x8000) /* EndPoint Correct TRansfer RX */
+#define EP_DTOG_RX (0x4000) /* EndPoint Data TOGGLE RX */
+#define EPRX_STAT (0x3000) /* EndPoint RX STATus bit field */
+#define EP_SETUP (0x0800) /* EndPoint SETUP */
+#define EP_T_FIELD (0x0600) /* EndPoint TYPE */
+#define EP_KIND (0x0100) /* EndPoint KIND */
+#define EP_CTR_TX (0x0080) /* EndPoint Correct TRansfer TX */
+#define EP_DTOG_TX (0x0040) /* EndPoint Data TOGGLE TX */
+#define EPTX_STAT (0x0030) /* EndPoint TX STATus bit field */
+#define EPADDR_FIELD (0x000F) /* EndPoint ADDRess FIELD */
+
+/* EndPoint REGister MASK (no toggle fields) */
+#define EPREG_MASK (EP_CTR_RX|EP_SETUP|EP_T_FIELD|EP_KIND|EP_CTR_TX|EPADDR_FIELD)
+
+/* EP_TYPE[1:0] EndPoint TYPE */
+#define EP_TYPE_MASK (0x0600) /* EndPoint TYPE Mask */
+#define EP_BULK (0x0000) /* EndPoint BULK */
+#define EP_CONTROL (0x0200) /* EndPoint CONTROL */
+#define EP_ISOCHRONOUS (0x0400) /* EndPoint ISOCHRONOUS */
+#define EP_INTERRUPT (0x0600) /* EndPoint INTERRUPT */
+#define EP_T_MASK (~EP_T_FIELD & EPREG_MASK)
+
+
+/* EP_KIND EndPoint KIND */
+#define EPKIND_MASK (~EP_KIND & EPREG_MASK)
+
+/* STAT_TX[1:0] STATus for TX transfer */
+#define EP_TX_DIS (0x0000) /* EndPoint TX DISabled */
+#define EP_TX_STALL (0x0010) /* EndPoint TX STALLed */
+#define EP_TX_NAK (0x0020) /* EndPoint TX NAKed */
+#define EP_TX_VALID (0x0030) /* EndPoint TX VALID */
+#define EPTX_DTOG1 (0x0010) /* EndPoint TX Data TOGgle bit1 */
+#define EPTX_DTOG2 (0x0020) /* EndPoint TX Data TOGgle bit2 */
+#define EPTX_DTOGMASK (EPTX_STAT|EPREG_MASK)
+
+/* STAT_RX[1:0] STATus for RX transfer */
+#define EP_RX_DIS (0x0000) /* EndPoint RX DISabled */
+#define EP_RX_STALL (0x1000) /* EndPoint RX STALLed */
+#define EP_RX_NAK (0x2000) /* EndPoint RX NAKed */
+#define EP_RX_VALID (0x3000) /* EndPoint RX VALID */
+#define EPRX_DTOG1 (0x1000) /* EndPoint RX Data TOGgle bit1 */
+#define EPRX_DTOG2 (0x2000) /* EndPoint RX Data TOGgle bit1 */
+#define EPRX_DTOGMASK (EPRX_STAT|EPREG_MASK)
+/* Exported macro ------------------------------------------------------------*/
+/* SetCNTR */
+#define _SetCNTR(wRegValue) (*CNTR = (uint16_t)wRegValue)
+
+/* SetISTR */
+#define _SetISTR(wRegValue) (*ISTR = (uint16_t)wRegValue)
+
+/* SetDADDR */
+#define _SetDADDR(wRegValue) (*DADDR = (uint16_t)wRegValue)
+
+/* SetBTABLE */
+#define _SetBTABLE(wRegValue)(*BTABLE = (uint16_t)(wRegValue & 0xFFF8))
+
+/* GetCNTR */
+#define _GetCNTR() ((uint16_t) *CNTR)
+
+/* GetISTR */
+#define _GetISTR() ((uint16_t) *ISTR)
+
+/* GetFNR */
+#define _GetFNR() ((uint16_t) *FNR)
+
+/* GetDADDR */
+#define _GetDADDR() ((uint16_t) *DADDR)
+
+/* GetBTABLE */
+#define _GetBTABLE() ((uint16_t) *BTABLE)
+
+/* SetENDPOINT */
+#define _SetENDPOINT(bEpNum,wRegValue) (*(EP0REG + bEpNum)= \
+ (uint16_t)wRegValue)
+
+/* GetENDPOINT */
+#define _GetENDPOINT(bEpNum) ((uint16_t)(*(EP0REG + bEpNum)))
+
+/*******************************************************************************
+* Macro Name : SetEPType
+* Description : sets the type in the endpoint register(bits EP_TYPE[1:0])
+* Input : bEpNum: Endpoint Number.
+* wType
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPType(bEpNum,wType) (_SetENDPOINT(bEpNum,\
+ ((_GetENDPOINT(bEpNum) & EP_T_MASK) | wType )))
+
+/*******************************************************************************
+* Macro Name : GetEPType
+* Description : gets the type in the endpoint register(bits EP_TYPE[1:0])
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Endpoint Type
+*******************************************************************************/
+#define _GetEPType(bEpNum) (_GetENDPOINT(bEpNum) & EP_T_FIELD)
+
+/*******************************************************************************
+* Macro Name : SetEPTxStatus
+* Description : sets the status for tx transfer (bits STAT_TX[1:0]).
+* Input : bEpNum: Endpoint Number.
+* wState: new state
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPTxStatus(bEpNum,wState) {\
+ register uint16_t _wRegVal; \
+ _wRegVal = _GetENDPOINT(bEpNum) & EPTX_DTOGMASK;\
+ /* toggle first bit ? */ \
+ if((EPTX_DTOG1 & wState)!= 0) \
+ _wRegVal ^= EPTX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((EPTX_DTOG2 & wState)!= 0) \
+ _wRegVal ^= EPTX_DTOG2; \
+ _SetENDPOINT(bEpNum, (_wRegVal | EP_CTR_RX|EP_CTR_TX)); \
+ } /* _SetEPTxStatus */
+
+/*******************************************************************************
+* Macro Name : SetEPRxStatus
+* Description : sets the status for rx transfer (bits STAT_TX[1:0])
+* Input : bEpNum: Endpoint Number.
+* wState: new state.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPRxStatus(bEpNum,wState) {\
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = _GetENDPOINT(bEpNum) & EPRX_DTOGMASK;\
+ /* toggle first bit ? */ \
+ if((EPRX_DTOG1 & wState)!= 0) \
+ _wRegVal ^= EPRX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((EPRX_DTOG2 & wState)!= 0) \
+ _wRegVal ^= EPRX_DTOG2; \
+ _SetENDPOINT(bEpNum, (_wRegVal | EP_CTR_RX|EP_CTR_TX)); \
+ } /* _SetEPRxStatus */
+
+/*******************************************************************************
+* Macro Name : SetEPRxTxStatus
+* Description : sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0])
+* Input : bEpNum: Endpoint Number.
+* wStaterx: new state.
+* wStatetx: new state.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPRxTxStatus(bEpNum,wStaterx,wStatetx) {\
+ register uint32_t _wRegVal; \
+ \
+ _wRegVal = _GetENDPOINT(bEpNum) & (EPRX_DTOGMASK |EPTX_STAT) ;\
+ /* toggle first bit ? */ \
+ if((EPRX_DTOG1 & wStaterx)!= 0) \
+ _wRegVal ^= EPRX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((EPRX_DTOG2 & wStaterx)!= 0) \
+ _wRegVal ^= EPRX_DTOG2; \
+ /* toggle first bit ? */ \
+ if((EPTX_DTOG1 & wStatetx)!= 0) \
+ _wRegVal ^= EPTX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((EPTX_DTOG2 & wStatetx)!= 0) \
+ _wRegVal ^= EPTX_DTOG2; \
+ _SetENDPOINT(bEpNum, _wRegVal | EP_CTR_RX|EP_CTR_TX); \
+ } /* _SetEPRxTxStatus */
+/*******************************************************************************
+* Macro Name : GetEPTxStatus / GetEPRxStatus
+* Description : gets the status for tx/rx transfer (bits STAT_TX[1:0]
+* /STAT_RX[1:0])
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : status .
+*******************************************************************************/
+#define _GetEPTxStatus(bEpNum) ((uint16_t)_GetENDPOINT(bEpNum) & EPTX_STAT)
+
+#define _GetEPRxStatus(bEpNum) ((uint16_t)_GetENDPOINT(bEpNum) & EPRX_STAT)
+
+/*******************************************************************************
+* Macro Name : SetEPTxValid / SetEPRxValid
+* Description : sets directly the VALID tx/rx-status into the enpoint register
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPTxValid(bEpNum) (_SetEPTxStatus(bEpNum, EP_TX_VALID))
+
+#define _SetEPRxValid(bEpNum) (_SetEPRxStatus(bEpNum, EP_RX_VALID))
+
+/*******************************************************************************
+* Macro Name : GetTxStallStatus / GetRxStallStatus.
+* Description : checks stall condition in an endpoint.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : TRUE = endpoint in stall condition.
+*******************************************************************************/
+#define _GetTxStallStatus(bEpNum) (_GetEPTxStatus(bEpNum) \
+ == EP_TX_STALL)
+#define _GetRxStallStatus(bEpNum) (_GetEPRxStatus(bEpNum) \
+ == EP_RX_STALL)
+
+/*******************************************************************************
+* Macro Name : SetEP_KIND / ClearEP_KIND.
+* Description : set & clear EP_KIND bit.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEP_KIND(bEpNum) (_SetENDPOINT(bEpNum, \
+ (EP_CTR_RX|EP_CTR_TX|((_GetENDPOINT(bEpNum) | EP_KIND) & EPREG_MASK))))
+#define _ClearEP_KIND(bEpNum) (_SetENDPOINT(bEpNum, \
+ (EP_CTR_RX|EP_CTR_TX|(_GetENDPOINT(bEpNum) & EPKIND_MASK))))
+
+/*******************************************************************************
+* Macro Name : Set_Status_Out / Clear_Status_Out.
+* Description : Sets/clears directly STATUS_OUT bit in the endpoint register.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _Set_Status_Out(bEpNum) _SetEP_KIND(bEpNum)
+#define _Clear_Status_Out(bEpNum) _ClearEP_KIND(bEpNum)
+
+/*******************************************************************************
+* Macro Name : SetEPDoubleBuff / ClearEPDoubleBuff.
+* Description : Sets/clears directly EP_KIND bit in the endpoint register.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPDoubleBuff(bEpNum) _SetEP_KIND(bEpNum)
+#define _ClearEPDoubleBuff(bEpNum) _ClearEP_KIND(bEpNum)
+
+/*******************************************************************************
+* Macro Name : ClearEP_CTR_RX / ClearEP_CTR_TX.
+* Description : Clears bit CTR_RX / CTR_TX in the endpoint register.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _ClearEP_CTR_RX(bEpNum) (_SetENDPOINT(bEpNum,\
+ _GetENDPOINT(bEpNum) & 0x7FFF & EPREG_MASK))
+#define _ClearEP_CTR_TX(bEpNum) (_SetENDPOINT(bEpNum,\
+ _GetENDPOINT(bEpNum) & 0xFF7F & EPREG_MASK))
+
+/*******************************************************************************
+* Macro Name : ToggleDTOG_RX / ToggleDTOG_TX .
+* Description : Toggles DTOG_RX / DTOG_TX bit in the endpoint register.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _ToggleDTOG_RX(bEpNum) (_SetENDPOINT(bEpNum, \
+ EP_CTR_RX|EP_CTR_TX|EP_DTOG_RX | (_GetENDPOINT(bEpNum) & EPREG_MASK)))
+#define _ToggleDTOG_TX(bEpNum) (_SetENDPOINT(bEpNum, \
+ EP_CTR_RX|EP_CTR_TX|EP_DTOG_TX | (_GetENDPOINT(bEpNum) & EPREG_MASK)))
+
+/*******************************************************************************
+* Macro Name : ClearDTOG_RX / ClearDTOG_TX.
+* Description : Clears DTOG_RX / DTOG_TX bit in the endpoint register.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _ClearDTOG_RX(bEpNum) if((_GetENDPOINT(bEpNum) & EP_DTOG_RX) != 0)\
+ _ToggleDTOG_RX(bEpNum)
+#define _ClearDTOG_TX(bEpNum) if((_GetENDPOINT(bEpNum) & EP_DTOG_TX) != 0)\
+ _ToggleDTOG_TX(bEpNum)
+/*******************************************************************************
+* Macro Name : SetEPAddress.
+* Description : Sets address in an endpoint register.
+* Input : bEpNum: Endpoint Number.
+* bAddr: Address.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPAddress(bEpNum,bAddr) _SetENDPOINT(bEpNum,\
+ EP_CTR_RX|EP_CTR_TX|(_GetENDPOINT(bEpNum) & EPREG_MASK) | bAddr)
+
+/*******************************************************************************
+* Macro Name : GetEPAddress.
+* Description : Gets address in an endpoint register.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _GetEPAddress(bEpNum) ((uint8_t)(_GetENDPOINT(bEpNum) & EPADDR_FIELD))
+
+#define _pEPTxAddr(bEpNum) ((uint32_t *)((_GetBTABLE()+bEpNum*8 )*2 + PMAAddr))
+#define _pEPTxCount(bEpNum) ((uint32_t *)((_GetBTABLE()+bEpNum*8+2)*2 + PMAAddr))
+#define _pEPRxAddr(bEpNum) ((uint32_t *)((_GetBTABLE()+bEpNum*8+4)*2 + PMAAddr))
+#define _pEPRxCount(bEpNum) ((uint32_t *)((_GetBTABLE()+bEpNum*8+6)*2 + PMAAddr))
+
+/*******************************************************************************
+* Macro Name : SetEPTxAddr / SetEPRxAddr.
+* Description : sets address of the tx/rx buffer.
+* Input : bEpNum: Endpoint Number.
+* wAddr: address to be set (must be word aligned).
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPTxAddr(bEpNum,wAddr) (*_pEPTxAddr(bEpNum) = ((wAddr >> 1) << 1))
+#define _SetEPRxAddr(bEpNum,wAddr) (*_pEPRxAddr(bEpNum) = ((wAddr >> 1) << 1))
+
+/*******************************************************************************
+* Macro Name : GetEPTxAddr / GetEPRxAddr.
+* Description : Gets address of the tx/rx buffer.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : address of the buffer.
+*******************************************************************************/
+#define _GetEPTxAddr(bEpNum) ((uint16_t)*_pEPTxAddr(bEpNum))
+#define _GetEPRxAddr(bEpNum) ((uint16_t)*_pEPRxAddr(bEpNum))
+
+/*******************************************************************************
+* Macro Name : SetEPCountRxReg.
+* Description : Sets counter of rx buffer with no. of blocks.
+* Input : pdwReg: pointer to counter.
+* wCount: Counter.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _BlocksOf32(dwReg,wCount,wNBlocks) {\
+ wNBlocks = wCount >> 5;\
+ if((wCount & 0x1f) == 0)\
+ wNBlocks--;\
+ *pdwReg = (uint32_t)((wNBlocks << 10) | 0x8000);\
+ }/* _BlocksOf32 */
+
+#define _BlocksOf2(dwReg,wCount,wNBlocks) {\
+ wNBlocks = wCount >> 1;\
+ if((wCount & 0x1) != 0)\
+ wNBlocks++;\
+ *pdwReg = (uint32_t)(wNBlocks << 10);\
+ }/* _BlocksOf2 */
+
+#define _SetEPCountRxReg(dwReg,wCount) {\
+ uint16_t wNBlocks;\
+ if(wCount > 62){_BlocksOf32(dwReg,wCount,wNBlocks);}\
+ else {_BlocksOf2(dwReg,wCount,wNBlocks);}\
+ }/* _SetEPCountRxReg */
+
+
+
+#define _SetEPRxDblBuf0Count(bEpNum,wCount) {\
+ uint32_t *pdwReg = _pEPTxCount(bEpNum); \
+ _SetEPCountRxReg(pdwReg, wCount);\
+ }
+/*******************************************************************************
+* Macro Name : SetEPTxCount / SetEPRxCount.
+* Description : sets counter for the tx/rx buffer.
+* Input : bEpNum: endpoint number.
+* wCount: Counter value.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPTxCount(bEpNum,wCount) (*_pEPTxCount(bEpNum) = wCount)
+#define _SetEPRxCount(bEpNum,wCount) {\
+ uint32_t *pdwReg = _pEPRxCount(bEpNum); \
+ _SetEPCountRxReg(pdwReg, wCount);\
+ }
+/*******************************************************************************
+* Macro Name : GetEPTxCount / GetEPRxCount.
+* Description : gets counter of the tx buffer.
+* Input : bEpNum: endpoint number.
+* Output : None.
+* Return : Counter value.
+*******************************************************************************/
+#define _GetEPTxCount(bEpNum)((uint16_t)(*_pEPTxCount(bEpNum)) & 0x3ff)
+#define _GetEPRxCount(bEpNum)((uint16_t)(*_pEPRxCount(bEpNum)) & 0x3ff)
+
+/*******************************************************************************
+* Macro Name : SetEPDblBuf0Addr / SetEPDblBuf1Addr.
+* Description : Sets buffer 0/1 address in a double buffer endpoint.
+* Input : bEpNum: endpoint number.
+* : wBuf0Addr: buffer 0 address.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPDblBuf0Addr(bEpNum,wBuf0Addr) {_SetEPTxAddr(bEpNum, wBuf0Addr);}
+#define _SetEPDblBuf1Addr(bEpNum,wBuf1Addr) {_SetEPRxAddr(bEpNum, wBuf1Addr);}
+
+/*******************************************************************************
+* Macro Name : SetEPDblBuffAddr.
+* Description : Sets addresses in a double buffer endpoint.
+* Input : bEpNum: endpoint number.
+* : wBuf0Addr: buffer 0 address.
+* : wBuf1Addr = buffer 1 address.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPDblBuffAddr(bEpNum,wBuf0Addr,wBuf1Addr) { \
+ _SetEPDblBuf0Addr(bEpNum, wBuf0Addr);\
+ _SetEPDblBuf1Addr(bEpNum, wBuf1Addr);\
+ } /* _SetEPDblBuffAddr */
+
+/*******************************************************************************
+* Macro Name : GetEPDblBuf0Addr / GetEPDblBuf1Addr.
+* Description : Gets buffer 0/1 address of a double buffer endpoint.
+* Input : bEpNum: endpoint number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _GetEPDblBuf0Addr(bEpNum) (_GetEPTxAddr(bEpNum))
+#define _GetEPDblBuf1Addr(bEpNum) (_GetEPRxAddr(bEpNum))
+
+/*******************************************************************************
+* Macro Name : SetEPDblBuffCount / SetEPDblBuf0Count / SetEPDblBuf1Count.
+* Description : Gets buffer 0/1 address of a double buffer endpoint.
+* Input : bEpNum: endpoint number.
+* : bDir: endpoint dir EP_DBUF_OUT = OUT
+* EP_DBUF_IN = IN
+* : wCount: Counter value
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _SetEPDblBuf0Count(bEpNum, bDir, wCount) { \
+ if(bDir == EP_DBUF_OUT)\
+ /* OUT endpoint */ \
+ {_SetEPRxDblBuf0Count(bEpNum,wCount);} \
+ else if(bDir == EP_DBUF_IN)\
+ /* IN endpoint */ \
+ *_pEPTxCount(bEpNum) = (uint32_t)wCount; \
+ } /* SetEPDblBuf0Count*/
+
+#define _SetEPDblBuf1Count(bEpNum, bDir, wCount) { \
+ if(bDir == EP_DBUF_OUT)\
+ /* OUT endpoint */ \
+ {_SetEPRxCount(bEpNum,wCount);}\
+ else if(bDir == EP_DBUF_IN)\
+ /* IN endpoint */\
+ *_pEPRxCount(bEpNum) = (uint32_t)wCount; \
+ } /* SetEPDblBuf1Count */
+
+#define _SetEPDblBuffCount(bEpNum, bDir, wCount) {\
+ _SetEPDblBuf0Count(bEpNum, bDir, wCount); \
+ _SetEPDblBuf1Count(bEpNum, bDir, wCount); \
+ } /* _SetEPDblBuffCount */
+
+/*******************************************************************************
+* Macro Name : GetEPDblBuf0Count / GetEPDblBuf1Count.
+* Description : Gets buffer 0/1 rx/tx counter for double buffering.
+* Input : bEpNum: endpoint number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+#define _GetEPDblBuf0Count(bEpNum) (_GetEPTxCount(bEpNum))
+#define _GetEPDblBuf1Count(bEpNum) (_GetEPRxCount(bEpNum))
+
+
+/* External variables --------------------------------------------------------*/
+extern __IO uint16_t wIstr; /* ISTR register last read value */
+
+/* Exported functions ------------------------------------------------------- */
+void SetCNTR(uint16_t /*wRegValue*/);
+void SetISTR(uint16_t /*wRegValue*/);
+void SetDADDR(uint16_t /*wRegValue*/);
+void SetBTABLE(uint16_t /*wRegValue*/);
+void SetBTABLE(uint16_t /*wRegValue*/);
+uint16_t GetCNTR(void);
+uint16_t GetISTR(void);
+uint16_t GetFNR(void);
+uint16_t GetDADDR(void);
+uint16_t GetBTABLE(void);
+void SetENDPOINT(uint8_t /*bEpNum*/, uint16_t /*wRegValue*/);
+uint16_t GetENDPOINT(uint8_t /*bEpNum*/);
+void SetEPType(uint8_t /*bEpNum*/, uint16_t /*wType*/);
+uint16_t GetEPType(uint8_t /*bEpNum*/);
+void SetEPTxStatus(uint8_t /*bEpNum*/, uint16_t /*wState*/);
+void SetEPRxStatus(uint8_t /*bEpNum*/, uint16_t /*wState*/);
+void SetDouBleBuffEPStall(uint8_t /*bEpNum*/, uint8_t bDir);
+uint16_t GetEPTxStatus(uint8_t /*bEpNum*/);
+uint16_t GetEPRxStatus(uint8_t /*bEpNum*/);
+void SetEPTxValid(uint8_t /*bEpNum*/);
+void SetEPRxValid(uint8_t /*bEpNum*/);
+uint16_t GetTxStallStatus(uint8_t /*bEpNum*/);
+uint16_t GetRxStallStatus(uint8_t /*bEpNum*/);
+void SetEP_KIND(uint8_t /*bEpNum*/);
+void ClearEP_KIND(uint8_t /*bEpNum*/);
+void Set_Status_Out(uint8_t /*bEpNum*/);
+void Clear_Status_Out(uint8_t /*bEpNum*/);
+void SetEPDoubleBuff(uint8_t /*bEpNum*/);
+void ClearEPDoubleBuff(uint8_t /*bEpNum*/);
+void ClearEP_CTR_RX(uint8_t /*bEpNum*/);
+void ClearEP_CTR_TX(uint8_t /*bEpNum*/);
+void ToggleDTOG_RX(uint8_t /*bEpNum*/);
+void ToggleDTOG_TX(uint8_t /*bEpNum*/);
+void ClearDTOG_RX(uint8_t /*bEpNum*/);
+void ClearDTOG_TX(uint8_t /*bEpNum*/);
+void SetEPAddress(uint8_t /*bEpNum*/, uint8_t /*bAddr*/);
+uint8_t GetEPAddress(uint8_t /*bEpNum*/);
+void SetEPTxAddr(uint8_t /*bEpNum*/, uint16_t /*wAddr*/);
+void SetEPRxAddr(uint8_t /*bEpNum*/, uint16_t /*wAddr*/);
+uint16_t GetEPTxAddr(uint8_t /*bEpNum*/);
+uint16_t GetEPRxAddr(uint8_t /*bEpNum*/);
+void SetEPCountRxReg(uint32_t * /*pdwReg*/, uint16_t /*wCount*/);
+void SetEPTxCount(uint8_t /*bEpNum*/, uint16_t /*wCount*/);
+void SetEPRxCount(uint8_t /*bEpNum*/, uint16_t /*wCount*/);
+uint16_t GetEPTxCount(uint8_t /*bEpNum*/);
+uint16_t GetEPRxCount(uint8_t /*bEpNum*/);
+void SetEPDblBuf0Addr(uint8_t /*bEpNum*/, uint16_t /*wBuf0Addr*/);
+void SetEPDblBuf1Addr(uint8_t /*bEpNum*/, uint16_t /*wBuf1Addr*/);
+void SetEPDblBuffAddr(uint8_t /*bEpNum*/, uint16_t /*wBuf0Addr*/, uint16_t /*wBuf1Addr*/);
+uint16_t GetEPDblBuf0Addr(uint8_t /*bEpNum*/);
+uint16_t GetEPDblBuf1Addr(uint8_t /*bEpNum*/);
+void SetEPDblBuffCount(uint8_t /*bEpNum*/, uint8_t /*bDir*/, uint16_t /*wCount*/);
+void SetEPDblBuf0Count(uint8_t /*bEpNum*/, uint8_t /*bDir*/, uint16_t /*wCount*/);
+void SetEPDblBuf1Count(uint8_t /*bEpNum*/, uint8_t /*bDir*/, uint16_t /*wCount*/);
+uint16_t GetEPDblBuf0Count(uint8_t /*bEpNum*/);
+uint16_t GetEPDblBuf1Count(uint8_t /*bEpNum*/);
+EP_DBUF_DIR GetEPDblBufDir(uint8_t /*bEpNum*/);
+void FreeUserBuffer(uint8_t bEpNum/*bEpNum*/, uint8_t bDir);
+uint16_t ToWord(uint8_t, uint8_t);
+uint16_t ByteSwap(uint16_t);
+
+#endif /* STM32F10X_CL */
+
+#endif /* __USB_REGS_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_sil.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_sil.h
new file mode 100644
index 00000000..89aec978
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_sil.h
@@ -0,0 +1,34 @@
+/******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+* File Name : usb_sil.h
+* Author : MCD Application Team
+* Version : V3.3.0
+* Date : 21-March-2011
+* Description : Simplified Interface Layer function prototypes.
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_SIL_H
+#define __USB_SIL_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+uint32_t USB_SIL_Init(void);
+uint32_t USB_SIL_Write(uint8_t bEpAddr, uint8_t* pBufferPointer, uint32_t wBufferSize);
+uint32_t USB_SIL_Read(uint8_t bEpAddr, uint8_t* pBufferPointer);
+
+/* External variables --------------------------------------------------------*/
+
+#endif /* __USB_SIL_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_type.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_type.h
new file mode 100644
index 00000000..ad6a7bac
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/inc/usb_type.h
@@ -0,0 +1,74 @@
+/******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+* File Name : usb_type.h
+* Author : MCD Application Team
+* Version : V3.3.0
+* Date : 21-March-2011
+* Description : Type definitions used by the USB Library
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_TYPE_H
+#define __USB_TYPE_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "usb_conf.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+#ifndef NULL
+#define NULL ((void *)0)
+#endif
+
+#if !defined (__STM32F10x_H) && !defined(__STM32L1XX_H)
+
+typedef signed long s32;
+typedef signed short s16;
+typedef signed char s8;
+
+typedef volatile signed long vs32;
+typedef volatile signed short vs16;
+typedef volatile signed char vs8;
+
+typedef unsigned long u32;
+typedef unsigned short u16;
+typedef unsigned char u8;
+
+typedef unsigned long const uc32; /* Read Only */
+typedef unsigned short const uc16; /* Read Only */
+typedef unsigned char const uc8; /* Read Only */
+
+typedef volatile unsigned long vu32;
+typedef volatile unsigned short vu16;
+typedef volatile unsigned char vu8;
+
+typedef volatile unsigned long const vuc32; /* Read Only */
+typedef volatile unsigned short const vuc16; /* Read Only */
+typedef volatile unsigned char const vuc8; /* Read Only */
+
+typedef enum { RESET = 0, SET = !RESET } FlagStatus, ITStatus;
+
+typedef enum { DISABLE = 0, ENABLE = !DISABLE} FunctionalState;
+
+typedef enum { ERROR = 0, SUCCESS = !ERROR} ErrorStatus;
+#endif /* __STM32F10x_H && __STM32L15x_H */
+
+typedef enum
+{
+ FALSE = 0, TRUE = !FALSE
+}
+bool;
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+/* External variables --------------------------------------------------------*/
+
+#endif /* __USB_TYPE_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/src/usb_core.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/src/usb_core.c
new file mode 100644
index 00000000..140e22b4
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/src/usb_core.c
@@ -0,0 +1,1085 @@
+/******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+* File Name : usb_core.c
+* Author : MCD Application Team
+* Version : V3.3.0
+* Date : 21-March-2011
+* Description : Standard protocol processing (USB v2.0)
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Includes ------------------------------------------------------------------*/
+#include "usb_lib.h"
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define ValBit(VAR,Place) (VAR & (1 << Place))
+#define SetBit(VAR,Place) (VAR |= (1 << Place))
+#define ClrBit(VAR,Place) (VAR &= ((1 << Place) ^ 255))
+
+#ifdef STM32F10X_CL
+ #define Send0LengthData() {PCD_EP_Write (0, 0, 0) ; vSetEPTxStatus(EP_TX_VALID);}
+#else
+#define Send0LengthData() { _SetEPTxCount(ENDP0, 0); \
+ vSetEPTxStatus(EP_TX_VALID); \
+ }
+#endif /* STM32F10X_CL */
+
+#define vSetEPRxStatus(st) (SaveRState = st)
+#define vSetEPTxStatus(st) (SaveTState = st)
+
+#define USB_StatusIn() Send0LengthData()
+#define USB_StatusOut() vSetEPRxStatus(EP_RX_VALID)
+
+#define StatusInfo0 StatusInfo.bw.bb1 /* Reverse bb0 & bb1 */
+#define StatusInfo1 StatusInfo.bw.bb0
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+uint16_t_uint8_t StatusInfo;
+
+bool Data_Mul_MaxPacketSize = FALSE;
+/* Private function prototypes -----------------------------------------------*/
+static void DataStageOut(void);
+static void DataStageIn(void);
+static void NoData_Setup0(void);
+static void Data_Setup0(void);
+/* Private functions ---------------------------------------------------------*/
+
+/*******************************************************************************
+* Function Name : Standard_GetConfiguration.
+* Description : Return the current configuration variable address.
+* Input : Length - How many bytes are needed.
+* Output : None.
+* Return : Return 1 , if the request is invalid when "Length" is 0.
+* Return "Buffer" if the "Length" is not 0.
+*******************************************************************************/
+uint8_t *Standard_GetConfiguration(uint16_t Length)
+{
+ if (Length == 0)
+ {
+ pInformation->Ctrl_Info.Usb_wLength =
+ sizeof(pInformation->Current_Configuration);
+ return 0;
+ }
+ pUser_Standard_Requests->User_GetConfiguration();
+ return (uint8_t *)&pInformation->Current_Configuration;
+}
+
+/*******************************************************************************
+* Function Name : Standard_SetConfiguration.
+* Description : This routine is called to set the configuration value
+* Then each class should configure device itself.
+* Input : None.
+* Output : None.
+* Return : Return USB_SUCCESS, if the request is performed.
+* Return USB_UNSUPPORT, if the request is invalid.
+*******************************************************************************/
+RESULT Standard_SetConfiguration(void)
+{
+
+ if ((pInformation->USBwValue0 <=
+ Device_Table.Total_Configuration) && (pInformation->USBwValue1 == 0)
+ && (pInformation->USBwIndex == 0)) /*call Back usb spec 2.0*/
+ {
+ pInformation->Current_Configuration = pInformation->USBwValue0;
+ pUser_Standard_Requests->User_SetConfiguration();
+ return USB_SUCCESS;
+ }
+ else
+ {
+ return USB_UNSUPPORT;
+ }
+}
+
+/*******************************************************************************
+* Function Name : Standard_GetInterface.
+* Description : Return the Alternate Setting of the current interface.
+* Input : Length - How many bytes are needed.
+* Output : None.
+* Return : Return 0, if the request is invalid when "Length" is 0.
+* Return "Buffer" if the "Length" is not 0.
+*******************************************************************************/
+uint8_t *Standard_GetInterface(uint16_t Length)
+{
+ if (Length == 0)
+ {
+ pInformation->Ctrl_Info.Usb_wLength =
+ sizeof(pInformation->Current_AlternateSetting);
+ return 0;
+ }
+ pUser_Standard_Requests->User_GetInterface();
+ return (uint8_t *)&pInformation->Current_AlternateSetting;
+}
+
+/*******************************************************************************
+* Function Name : Standard_SetInterface.
+* Description : This routine is called to set the interface.
+* Then each class should configure the interface them self.
+* Input : None.
+* Output : None.
+* Return : - Return USB_SUCCESS, if the request is performed.
+* - Return USB_UNSUPPORT, if the request is invalid.
+*******************************************************************************/
+RESULT Standard_SetInterface(void)
+{
+ RESULT Re;
+ /*Test if the specified Interface and Alternate Setting are supported by
+ the application Firmware*/
+ Re = (*pProperty->Class_Get_Interface_Setting)(pInformation->USBwIndex0, pInformation->USBwValue0);
+
+ if (pInformation->Current_Configuration != 0)
+ {
+ if ((Re != USB_SUCCESS) || (pInformation->USBwIndex1 != 0)
+ || (pInformation->USBwValue1 != 0))
+ {
+ return USB_UNSUPPORT;
+ }
+ else if (Re == USB_SUCCESS)
+ {
+ pUser_Standard_Requests->User_SetInterface();
+ pInformation->Current_Interface = pInformation->USBwIndex0;
+ pInformation->Current_AlternateSetting = pInformation->USBwValue0;
+ return USB_SUCCESS;
+ }
+
+ }
+
+ return USB_UNSUPPORT;
+}
+
+/*******************************************************************************
+* Function Name : Standard_GetStatus.
+* Description : Copy the device request data to "StatusInfo buffer".
+* Input : - Length - How many bytes are needed.
+* Output : None.
+* Return : Return 0, if the request is at end of data block,
+* or is invalid when "Length" is 0.
+*******************************************************************************/
+uint8_t *Standard_GetStatus(uint16_t Length)
+{
+ if (Length == 0)
+ {
+ pInformation->Ctrl_Info.Usb_wLength = 2;
+ return 0;
+ }
+
+ /* Reset Status Information */
+ StatusInfo.w = 0;
+
+ if (Type_Recipient == (STANDARD_REQUEST | DEVICE_RECIPIENT))
+ {
+ /*Get Device Status */
+ uint8_t Feature = pInformation->Current_Feature;
+
+ /* Remote Wakeup enabled */
+ if (ValBit(Feature, 5))
+ {
+ SetBit(StatusInfo0, 1);
+ }
+ else
+ {
+ ClrBit(StatusInfo0, 1);
+ }
+
+ /* Bus-powered */
+ if (ValBit(Feature, 6))
+ {
+ SetBit(StatusInfo0, 0);
+ }
+ else /* Self-powered */
+ {
+ ClrBit(StatusInfo0, 0);
+ }
+ }
+ /*Interface Status*/
+ else if (Type_Recipient == (STANDARD_REQUEST | INTERFACE_RECIPIENT))
+ {
+ return (uint8_t *)&StatusInfo;
+ }
+ /*Get EndPoint Status*/
+ else if (Type_Recipient == (STANDARD_REQUEST | ENDPOINT_RECIPIENT))
+ {
+ uint8_t Related_Endpoint;
+ uint8_t wIndex0 = pInformation->USBwIndex0;
+
+ Related_Endpoint = (wIndex0 & 0x0f);
+ if (ValBit(wIndex0, 7))
+ {
+ /* IN endpoint */
+ if (_GetTxStallStatus(Related_Endpoint))
+ {
+ SetBit(StatusInfo0, 0); /* IN Endpoint stalled */
+ }
+ }
+ else
+ {
+ /* OUT endpoint */
+ if (_GetRxStallStatus(Related_Endpoint))
+ {
+ SetBit(StatusInfo0, 0); /* OUT Endpoint stalled */
+ }
+ }
+
+ }
+ else
+ {
+ return NULL;
+ }
+ pUser_Standard_Requests->User_GetStatus();
+ return (uint8_t *)&StatusInfo;
+}
+
+/*******************************************************************************
+* Function Name : Standard_ClearFeature.
+* Description : Clear or disable a specific feature.
+* Input : None.
+* Output : None.
+* Return : - Return USB_SUCCESS, if the request is performed.
+* - Return USB_UNSUPPORT, if the request is invalid.
+*******************************************************************************/
+RESULT Standard_ClearFeature(void)
+{
+ uint32_t Type_Rec = Type_Recipient;
+ uint32_t Status;
+
+
+ if (Type_Rec == (STANDARD_REQUEST | DEVICE_RECIPIENT))
+ {/*Device Clear Feature*/
+ ClrBit(pInformation->Current_Feature, 5);
+ return USB_SUCCESS;
+ }
+ else if (Type_Rec == (STANDARD_REQUEST | ENDPOINT_RECIPIENT))
+ {/*EndPoint Clear Feature*/
+ DEVICE* pDev;
+ uint32_t Related_Endpoint;
+ uint32_t wIndex0;
+ uint32_t rEP;
+
+ if ((pInformation->USBwValue != ENDPOINT_STALL)
+ || (pInformation->USBwIndex1 != 0))
+ {
+ return USB_UNSUPPORT;
+ }
+
+ pDev = &Device_Table;
+ wIndex0 = pInformation->USBwIndex0;
+ rEP = wIndex0 & ~0x80;
+ Related_Endpoint = ENDP0 + rEP;
+
+ if (ValBit(pInformation->USBwIndex0, 7))
+ {
+ /*Get Status of endpoint & stall the request if the related_ENdpoint
+ is Disabled*/
+ Status = _GetEPTxStatus(Related_Endpoint);
+ }
+ else
+ {
+ Status = _GetEPRxStatus(Related_Endpoint);
+ }
+
+ if ((rEP >= pDev->Total_Endpoint) || (Status == 0)
+ || (pInformation->Current_Configuration == 0))
+ {
+ return USB_UNSUPPORT;
+ }
+
+
+ if (wIndex0 & 0x80)
+ {
+ /* IN endpoint */
+ if (_GetTxStallStatus(Related_Endpoint ))
+ {
+ #ifndef STM32F10X_CL
+ ClearDTOG_TX(Related_Endpoint);
+ #endif /* STM32F10X_CL */
+ SetEPTxStatus(Related_Endpoint, EP_TX_VALID);
+ }
+ }
+ else
+ {
+ /* OUT endpoint */
+ if (_GetRxStallStatus(Related_Endpoint))
+ {
+ if (Related_Endpoint == ENDP0)
+ {
+ /* After clear the STALL, enable the default endpoint receiver */
+ SetEPRxCount(Related_Endpoint, Device_Property.MaxPacketSize);
+ _SetEPRxStatus(Related_Endpoint, EP_RX_VALID);
+ }
+ else
+ {
+ #ifndef STM32F10X_CL
+ ClearDTOG_RX(Related_Endpoint);
+ #endif /* STM32F10X_CL */
+ _SetEPRxStatus(Related_Endpoint, EP_RX_VALID);
+ }
+ }
+ }
+ pUser_Standard_Requests->User_ClearFeature();
+ return USB_SUCCESS;
+ }
+
+ return USB_UNSUPPORT;
+}
+
+/*******************************************************************************
+* Function Name : Standard_SetEndPointFeature
+* Description : Set or enable a specific feature of EndPoint
+* Input : None.
+* Output : None.
+* Return : - Return USB_SUCCESS, if the request is performed.
+* - Return USB_UNSUPPORT, if the request is invalid.
+*******************************************************************************/
+RESULT Standard_SetEndPointFeature(void)
+{
+ uint32_t wIndex0;
+ uint32_t Related_Endpoint;
+ uint32_t rEP;
+ uint32_t Status;
+
+ wIndex0 = pInformation->USBwIndex0;
+ rEP = wIndex0 & ~0x80;
+ Related_Endpoint = ENDP0 + rEP;
+
+ if (ValBit(pInformation->USBwIndex0, 7))
+ {
+ /* get Status of endpoint & stall the request if the related_ENdpoint
+ is Disabled*/
+ Status = _GetEPTxStatus(Related_Endpoint);
+ }
+ else
+ {
+ Status = _GetEPRxStatus(Related_Endpoint);
+ }
+
+ if (Related_Endpoint >= Device_Table.Total_Endpoint
+ || pInformation->USBwValue != 0 || Status == 0
+ || pInformation->Current_Configuration == 0)
+ {
+ return USB_UNSUPPORT;
+ }
+ else
+ {
+ if (wIndex0 & 0x80)
+ {
+ /* IN endpoint */
+ _SetEPTxStatus(Related_Endpoint, EP_TX_STALL);
+ }
+
+ else
+ {
+ /* OUT endpoint */
+ _SetEPRxStatus(Related_Endpoint, EP_RX_STALL);
+ }
+ }
+ pUser_Standard_Requests->User_SetEndPointFeature();
+ return USB_SUCCESS;
+}
+
+/*******************************************************************************
+* Function Name : Standard_SetDeviceFeature.
+* Description : Set or enable a specific feature of Device.
+* Input : None.
+* Output : None.
+* Return : - Return USB_SUCCESS, if the request is performed.
+* - Return USB_UNSUPPORT, if the request is invalid.
+*******************************************************************************/
+RESULT Standard_SetDeviceFeature(void)
+{
+ SetBit(pInformation->Current_Feature, 5);
+ pUser_Standard_Requests->User_SetDeviceFeature();
+ return USB_SUCCESS;
+}
+
+/*******************************************************************************
+* Function Name : Standard_GetDescriptorData.
+* Description : Standard_GetDescriptorData is used for descriptors transfer.
+* : This routine is used for the descriptors resident in Flash
+* or RAM
+* pDesc can be in either Flash or RAM
+* The purpose of this routine is to have a versatile way to
+* response descriptors request. It allows user to generate
+* certain descriptors with software or read descriptors from
+* external storage part by part.
+* Input : - Length - Length of the data in this transfer.
+* - pDesc - A pointer points to descriptor struct.
+* The structure gives the initial address of the descriptor and
+* its original size.
+* Output : None.
+* Return : Address of a part of the descriptor pointed by the Usb_
+* wOffset The buffer pointed by this address contains at least
+* Length bytes.
+*******************************************************************************/
+uint8_t *Standard_GetDescriptorData(uint16_t Length, ONE_DESCRIPTOR *pDesc)
+{
+ uint32_t wOffset;
+
+ wOffset = pInformation->Ctrl_Info.Usb_wOffset;
+ if (Length == 0)
+ {
+ pInformation->Ctrl_Info.Usb_wLength = pDesc->Descriptor_Size - wOffset;
+ return 0;
+ }
+
+ return pDesc->Descriptor + wOffset;
+}
+
+/*******************************************************************************
+* Function Name : DataStageOut.
+* Description : Data stage of a Control Write Transfer.
+* Input : None.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void DataStageOut(void)
+{
+ ENDPOINT_INFO *pEPinfo = &pInformation->Ctrl_Info;
+ uint32_t save_rLength;
+
+ save_rLength = pEPinfo->Usb_rLength;
+
+ if (pEPinfo->CopyData && save_rLength)
+ {
+ uint8_t *Buffer;
+ uint32_t Length;
+
+ Length = pEPinfo->PacketSize;
+ if (Length > save_rLength)
+ {
+ Length = save_rLength;
+ }
+
+ Buffer = (*pEPinfo->CopyData)(Length);
+ pEPinfo->Usb_rLength -= Length;
+ pEPinfo->Usb_rOffset += Length;
+
+ #ifdef STM32F10X_CL
+ PCD_EP_Read(ENDP0, Buffer, Length);
+ #else
+ PMAToUserBufferCopy(Buffer, GetEPRxAddr(ENDP0), Length);
+ #endif /* STM32F10X_CL */
+ }
+
+ if (pEPinfo->Usb_rLength != 0)
+ {
+ vSetEPRxStatus(EP_RX_VALID);/* re-enable for next data reception */
+ SetEPTxCount(ENDP0, 0);
+ vSetEPTxStatus(EP_TX_VALID);/* Expect the host to abort the data OUT stage */
+ }
+ /* Set the next State*/
+ if (pEPinfo->Usb_rLength >= pEPinfo->PacketSize)
+ {
+ pInformation->ControlState = OUT_DATA;
+ }
+ else
+ {
+ if (pEPinfo->Usb_rLength > 0)
+ {
+ pInformation->ControlState = LAST_OUT_DATA;
+ }
+ else if (pEPinfo->Usb_rLength == 0)
+ {
+ pInformation->ControlState = WAIT_STATUS_IN;
+ USB_StatusIn();
+ }
+ }
+}
+
+/*******************************************************************************
+* Function Name : DataStageIn.
+* Description : Data stage of a Control Read Transfer.
+* Input : None.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void DataStageIn(void)
+{
+ ENDPOINT_INFO *pEPinfo = &pInformation->Ctrl_Info;
+ uint32_t save_wLength = pEPinfo->Usb_wLength;
+ uint32_t ControlState = pInformation->ControlState;
+
+ uint8_t *DataBuffer;
+ uint32_t Length;
+
+ if ((save_wLength == 0) && (ControlState == LAST_IN_DATA))
+ {
+ if(Data_Mul_MaxPacketSize == TRUE)
+ {
+ /* No more data to send and empty packet */
+ Send0LengthData();
+ ControlState = LAST_IN_DATA;
+ Data_Mul_MaxPacketSize = FALSE;
+ }
+ else
+ {
+ /* No more data to send so STALL the TX Status*/
+ ControlState = WAIT_STATUS_OUT;
+
+ #ifdef STM32F10X_CL
+ PCD_EP_Read (ENDP0, 0, 0);
+ #endif /* STM32F10X_CL */
+
+ #ifndef STM32F10X_CL
+ vSetEPTxStatus(EP_TX_STALL);
+ #endif /* STM32F10X_CL */
+ }
+
+ goto Expect_Status_Out;
+ }
+
+ Length = pEPinfo->PacketSize;
+ ControlState = (save_wLength <= Length) ? LAST_IN_DATA : IN_DATA;
+
+ if (Length > save_wLength)
+ {
+ Length = save_wLength;
+ }
+
+ DataBuffer = (*pEPinfo->CopyData)(Length);
+
+#ifdef STM32F10X_CL
+ PCD_EP_Write (ENDP0, DataBuffer, Length);
+#else
+ UserToPMABufferCopy(DataBuffer, GetEPTxAddr(ENDP0), Length);
+#endif /* STM32F10X_CL */
+
+ SetEPTxCount(ENDP0, Length);
+
+ pEPinfo->Usb_wLength -= Length;
+ pEPinfo->Usb_wOffset += Length;
+ vSetEPTxStatus(EP_TX_VALID);
+
+ USB_StatusOut();/* Expect the host to abort the data IN stage */
+
+Expect_Status_Out:
+ pInformation->ControlState = ControlState;
+}
+
+/*******************************************************************************
+* Function Name : NoData_Setup0.
+* Description : Proceed the processing of setup request without data stage.
+* Input : None.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void NoData_Setup0(void)
+{
+ RESULT Result = USB_UNSUPPORT;
+ uint32_t RequestNo = pInformation->USBbRequest;
+ uint32_t ControlState;
+
+ if (Type_Recipient == (STANDARD_REQUEST | DEVICE_RECIPIENT))
+ {
+ /* Device Request*/
+ /* SET_CONFIGURATION*/
+ if (RequestNo == SET_CONFIGURATION)
+ {
+ Result = Standard_SetConfiguration();
+ }
+
+ /*SET ADDRESS*/
+ else if (RequestNo == SET_ADDRESS)
+ {
+ if ((pInformation->USBwValue0 > 127) || (pInformation->USBwValue1 != 0)
+ || (pInformation->USBwIndex != 0)
+ || (pInformation->Current_Configuration != 0))
+ /* Device Address should be 127 or less*/
+ {
+ ControlState = STALLED;
+ goto exit_NoData_Setup0;
+ }
+ else
+ {
+ Result = USB_SUCCESS;
+
+ #ifdef STM32F10X_CL
+ SetDeviceAddress(pInformation->USBwValue0);
+ #endif /* STM32F10X_CL */
+ }
+ }
+ /*SET FEATURE for Device*/
+ else if (RequestNo == SET_FEATURE)
+ {
+ if ((pInformation->USBwValue0 == DEVICE_REMOTE_WAKEUP) \
+ && (pInformation->USBwIndex == 0))
+ {
+ Result = Standard_SetDeviceFeature();
+ }
+ else
+ {
+ Result = USB_UNSUPPORT;
+ }
+ }
+ /*Clear FEATURE for Device */
+ else if (RequestNo == CLEAR_FEATURE)
+ {
+ if (pInformation->USBwValue0 == DEVICE_REMOTE_WAKEUP
+ && pInformation->USBwIndex == 0
+ && ValBit(pInformation->Current_Feature, 5))
+ {
+ Result = Standard_ClearFeature();
+ }
+ else
+ {
+ Result = USB_UNSUPPORT;
+ }
+ }
+
+ }
+
+ /* Interface Request*/
+ else if (Type_Recipient == (STANDARD_REQUEST | INTERFACE_RECIPIENT))
+ {
+ /*SET INTERFACE*/
+ if (RequestNo == SET_INTERFACE)
+ {
+ Result = Standard_SetInterface();
+ }
+ }
+
+ /* EndPoint Request*/
+ else if (Type_Recipient == (STANDARD_REQUEST | ENDPOINT_RECIPIENT))
+ {
+ /*CLEAR FEATURE for EndPoint*/
+ if (RequestNo == CLEAR_FEATURE)
+ {
+ Result = Standard_ClearFeature();
+ }
+ /* SET FEATURE for EndPoint*/
+ else if (RequestNo == SET_FEATURE)
+ {
+ Result = Standard_SetEndPointFeature();
+ }
+ }
+ else
+ {
+ Result = USB_UNSUPPORT;
+ }
+
+
+ if (Result != USB_SUCCESS)
+ {
+ Result = (*pProperty->Class_NoData_Setup)(RequestNo);
+ if (Result == USB_NOT_READY)
+ {
+ ControlState = PAUSE;
+ goto exit_NoData_Setup0;
+ }
+ }
+
+ if (Result != USB_SUCCESS)
+ {
+ ControlState = STALLED;
+ goto exit_NoData_Setup0;
+ }
+
+ ControlState = WAIT_STATUS_IN;/* After no data stage SETUP */
+
+ USB_StatusIn();
+
+exit_NoData_Setup0:
+ pInformation->ControlState = ControlState;
+ return;
+}
+
+/*******************************************************************************
+* Function Name : Data_Setup0.
+* Description : Proceed the processing of setup request with data stage.
+* Input : None.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void Data_Setup0(void)
+{
+ uint8_t *(*CopyRoutine)(uint16_t);
+ RESULT Result;
+ uint32_t Request_No = pInformation->USBbRequest;
+
+ uint32_t Related_Endpoint, Reserved;
+ uint32_t wOffset, Status;
+
+
+
+ CopyRoutine = NULL;
+ wOffset = 0;
+
+ /*GET DESCRIPTOR*/
+ if (Request_No == GET_DESCRIPTOR)
+ {
+ if (Type_Recipient == (STANDARD_REQUEST | DEVICE_RECIPIENT))
+ {
+ uint8_t wValue1 = pInformation->USBwValue1;
+ if (wValue1 == DEVICE_DESCRIPTOR)
+ {
+ CopyRoutine = pProperty->GetDeviceDescriptor;
+ }
+ else if (wValue1 == CONFIG_DESCRIPTOR)
+ {
+ CopyRoutine = pProperty->GetConfigDescriptor;
+ }
+ else if (wValue1 == STRING_DESCRIPTOR)
+ {
+ CopyRoutine = pProperty->GetStringDescriptor;
+ } /* End of GET_DESCRIPTOR */
+ }
+ }
+
+ /*GET STATUS*/
+ else if ((Request_No == GET_STATUS) && (pInformation->USBwValue == 0)
+ && (pInformation->USBwLength == 0x0002)
+ && (pInformation->USBwIndex1 == 0))
+ {
+ /* GET STATUS for Device*/
+ if ((Type_Recipient == (STANDARD_REQUEST | DEVICE_RECIPIENT))
+ && (pInformation->USBwIndex == 0))
+ {
+ CopyRoutine = Standard_GetStatus;
+ }
+
+ /* GET STATUS for Interface*/
+ else if (Type_Recipient == (STANDARD_REQUEST | INTERFACE_RECIPIENT))
+ {
+ if (((*pProperty->Class_Get_Interface_Setting)(pInformation->USBwIndex0, 0) == USB_SUCCESS)
+ && (pInformation->Current_Configuration != 0))
+ {
+ CopyRoutine = Standard_GetStatus;
+ }
+ }
+
+ /* GET STATUS for EndPoint*/
+ else if (Type_Recipient == (STANDARD_REQUEST | ENDPOINT_RECIPIENT))
+ {
+ Related_Endpoint = (pInformation->USBwIndex0 & 0x0f);
+ Reserved = pInformation->USBwIndex0 & 0x70;
+
+ if (ValBit(pInformation->USBwIndex0, 7))
+ {
+ /*Get Status of endpoint & stall the request if the related_ENdpoint
+ is Disabled*/
+ Status = _GetEPTxStatus(Related_Endpoint);
+ }
+ else
+ {
+ Status = _GetEPRxStatus(Related_Endpoint);
+ }
+
+ if ((Related_Endpoint < Device_Table.Total_Endpoint) && (Reserved == 0)
+ && (Status != 0))
+ {
+ CopyRoutine = Standard_GetStatus;
+ }
+ }
+
+ }
+
+ /*GET CONFIGURATION*/
+ else if (Request_No == GET_CONFIGURATION)
+ {
+ if (Type_Recipient == (STANDARD_REQUEST | DEVICE_RECIPIENT))
+ {
+ CopyRoutine = Standard_GetConfiguration;
+ }
+ }
+ /*GET INTERFACE*/
+ else if (Request_No == GET_INTERFACE)
+ {
+ if ((Type_Recipient == (STANDARD_REQUEST | INTERFACE_RECIPIENT))
+ && (pInformation->Current_Configuration != 0) && (pInformation->USBwValue == 0)
+ && (pInformation->USBwIndex1 == 0) && (pInformation->USBwLength == 0x0001)
+ && ((*pProperty->Class_Get_Interface_Setting)(pInformation->USBwIndex0, 0) == USB_SUCCESS))
+ {
+ CopyRoutine = Standard_GetInterface;
+ }
+
+ }
+
+ if (CopyRoutine)
+ {
+ pInformation->Ctrl_Info.Usb_wOffset = wOffset;
+ pInformation->Ctrl_Info.CopyData = CopyRoutine;
+ /* sb in the original the cast to word was directly */
+ /* now the cast is made step by step */
+ (*CopyRoutine)(0);
+ Result = USB_SUCCESS;
+ }
+ else
+ {
+ Result = (*pProperty->Class_Data_Setup)(pInformation->USBbRequest);
+ if (Result == USB_NOT_READY)
+ {
+ pInformation->ControlState = PAUSE;
+ return;
+ }
+ }
+
+ if (pInformation->Ctrl_Info.Usb_wLength == 0xFFFF)
+ {
+ /* Data is not ready, wait it */
+ pInformation->ControlState = PAUSE;
+ return;
+ }
+ if ((Result == USB_UNSUPPORT) || (pInformation->Ctrl_Info.Usb_wLength == 0))
+ {
+ /* Unsupported request */
+ pInformation->ControlState = STALLED;
+ return;
+ }
+
+
+ if (ValBit(pInformation->USBbmRequestType, 7))
+ {
+ /* Device ==> Host */
+ __IO uint32_t wLength = pInformation->USBwLength;
+
+ /* Restrict the data length to be the one host asks for */
+ if (pInformation->Ctrl_Info.Usb_wLength > wLength)
+ {
+ pInformation->Ctrl_Info.Usb_wLength = wLength;
+ }
+
+ else if (pInformation->Ctrl_Info.Usb_wLength < pInformation->USBwLength)
+ {
+ if (pInformation->Ctrl_Info.Usb_wLength < pProperty->MaxPacketSize)
+ {
+ Data_Mul_MaxPacketSize = FALSE;
+ }
+ else if ((pInformation->Ctrl_Info.Usb_wLength % pProperty->MaxPacketSize) == 0)
+ {
+ Data_Mul_MaxPacketSize = TRUE;
+ }
+ }
+
+ pInformation->Ctrl_Info.PacketSize = pProperty->MaxPacketSize;
+ DataStageIn();
+ }
+ else
+ {
+ pInformation->ControlState = OUT_DATA;
+ vSetEPRxStatus(EP_RX_VALID); /* enable for next data reception */
+ }
+
+ return;
+}
+
+/*******************************************************************************
+* Function Name : Setup0_Process
+* Description : Get the device request data and dispatch to individual process.
+* Input : None.
+* Output : None.
+* Return : Post0_Process.
+*******************************************************************************/
+uint8_t Setup0_Process(void)
+{
+
+ union
+ {
+ uint8_t* b;
+ uint16_t* w;
+ } pBuf;
+
+#ifdef STM32F10X_CL
+ USB_OTG_EP *ep;
+ uint16_t offset = 0;
+
+ ep = PCD_GetOutEP(ENDP0);
+ pBuf.b = ep->xfer_buff;
+#else
+ uint16_t offset = 1;
+
+ pBuf.b = PMAAddr + (uint8_t *)(_GetEPRxAddr(ENDP0) * 2); /* *2 for 32 bits addr */
+#endif /* STM32F10X_CL */
+
+ if (pInformation->ControlState != PAUSE)
+ {
+ pInformation->USBbmRequestType = *pBuf.b++; /* bmRequestType */
+ pInformation->USBbRequest = *pBuf.b++; /* bRequest */
+ pBuf.w += offset; /* word not accessed because of 32 bits addressing */
+ pInformation->USBwValue = ByteSwap(*pBuf.w++); /* wValue */
+ pBuf.w += offset; /* word not accessed because of 32 bits addressing */
+ pInformation->USBwIndex = ByteSwap(*pBuf.w++); /* wIndex */
+ pBuf.w += offset; /* word not accessed because of 32 bits addressing */
+ pInformation->USBwLength = *pBuf.w; /* wLength */
+ }
+
+ pInformation->ControlState = SETTING_UP;
+ if (pInformation->USBwLength == 0)
+ {
+ /* Setup with no data stage */
+ NoData_Setup0();
+ }
+ else
+ {
+ /* Setup with data stage */
+ Data_Setup0();
+ }
+ return Post0_Process();
+}
+
+/*******************************************************************************
+* Function Name : In0_Process
+* Description : Process the IN token on all default endpoint.
+* Input : None.
+* Output : None.
+* Return : Post0_Process.
+*******************************************************************************/
+uint8_t In0_Process(void)
+{
+ uint32_t ControlState = pInformation->ControlState;
+
+ if ((ControlState == IN_DATA) || (ControlState == LAST_IN_DATA))
+ {
+ DataStageIn();
+ /* ControlState may be changed outside the function */
+ ControlState = pInformation->ControlState;
+ }
+
+ else if (ControlState == WAIT_STATUS_IN)
+ {
+ if ((pInformation->USBbRequest == SET_ADDRESS) &&
+ (Type_Recipient == (STANDARD_REQUEST | DEVICE_RECIPIENT)))
+ {
+ SetDeviceAddress(pInformation->USBwValue0);
+ pUser_Standard_Requests->User_SetDeviceAddress();
+ }
+ (*pProperty->Process_Status_IN)();
+ ControlState = STALLED;
+ }
+
+ else
+ {
+ ControlState = STALLED;
+ }
+
+ pInformation->ControlState = ControlState;
+
+ return Post0_Process();
+}
+
+/*******************************************************************************
+* Function Name : Out0_Process
+* Description : Process the OUT token on all default endpoint.
+* Input : None.
+* Output : None.
+* Return : Post0_Process.
+*******************************************************************************/
+uint8_t Out0_Process(void)
+{
+ uint32_t ControlState = pInformation->ControlState;
+
+ if ((ControlState == IN_DATA) || (ControlState == LAST_IN_DATA))
+ {
+ /* host aborts the transfer before finish */
+ ControlState = STALLED;
+ }
+ else if ((ControlState == OUT_DATA) || (ControlState == LAST_OUT_DATA))
+ {
+ DataStageOut();
+ ControlState = pInformation->ControlState; /* may be changed outside the function */
+ }
+
+ else if (ControlState == WAIT_STATUS_OUT)
+ {
+ (*pProperty->Process_Status_OUT)();
+ #ifndef STM32F10X_CL
+ ControlState = STALLED;
+ #endif /* STM32F10X_CL */
+ }
+
+
+ /* Unexpect state, STALL the endpoint */
+ else
+ {
+ ControlState = STALLED;
+ }
+
+ pInformation->ControlState = ControlState;
+
+ return Post0_Process();
+}
+
+/*******************************************************************************
+* Function Name : Post0_Process
+* Description : Stall the Endpoint 0 in case of error.
+* Input : None.
+* Output : None.
+* Return : - 0 if the control State is in PAUSE
+* - 1 if not.
+*******************************************************************************/
+uint8_t Post0_Process(void)
+{
+#ifdef STM32F10X_CL
+ USB_OTG_EP *ep;
+#endif /* STM32F10X_CL */
+
+ SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
+
+ if (pInformation->ControlState == STALLED)
+ {
+ vSetEPRxStatus(EP_RX_STALL);
+ vSetEPTxStatus(EP_TX_STALL);
+ }
+
+#ifdef STM32F10X_CL
+ else if ((pInformation->ControlState == OUT_DATA) ||
+ (pInformation->ControlState == WAIT_STATUS_OUT))
+ {
+ ep = PCD_GetInEP(0);
+ ep->is_in = 0;
+ OTGD_FS_EP0StartXfer(ep);
+
+ vSetEPTxStatus(EP_TX_VALID);
+ }
+
+ else if ((pInformation->ControlState == IN_DATA) ||
+ (pInformation->ControlState == WAIT_STATUS_IN))
+ {
+ ep = PCD_GetInEP(0);
+ ep->is_in = 1;
+ OTGD_FS_EP0StartXfer(ep);
+ }
+#endif /* STM32F10X_CL */
+
+ return (pInformation->ControlState == PAUSE);
+}
+
+/*******************************************************************************
+* Function Name : SetDeviceAddress.
+* Description : Set the device and all the used Endpoints addresses.
+* Input : - Val: device address.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetDeviceAddress(uint8_t Val)
+{
+#ifdef STM32F10X_CL
+ PCD_EP_SetAddress ((uint8_t)Val);
+#else
+ uint32_t i;
+ uint32_t nEP = Device_Table.Total_Endpoint;
+
+ /* set address in every used endpoint */
+ for (i = 0; i < nEP; i++)
+ {
+ _SetEPAddress((uint8_t)i, (uint8_t)i);
+ } /* for */
+ _SetDADDR(Val | DADDR_EF); /* set device address and enable function */
+#endif /* STM32F10X_CL */
+}
+
+/*******************************************************************************
+* Function Name : NOP_Process
+* Description : No operation function.
+* Input : None.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void NOP_Process(void)
+{
+}
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/src/usb_init.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/src/usb_init.c
new file mode 100644
index 00000000..f5c83c92
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/src/usb_init.c
@@ -0,0 +1,63 @@
+/******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+* File Name : usb_init.c
+* Author : MCD Application Team
+* Version : V3.3.0
+* Date : 21-March-2011
+* Description : Initialization routines & global variables
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Includes ------------------------------------------------------------------*/
+#include "usb_lib.h"
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* The number of current endpoint, it will be used to specify an endpoint */
+ uint8_t EPindex;
+/* The number of current device, it is an index to the Device_Table */
+/* uint8_t Device_no; */
+/* Points to the DEVICE_INFO structure of current device */
+/* The purpose of this register is to speed up the execution */
+DEVICE_INFO *pInformation;
+/* Points to the DEVICE_PROP structure of current device */
+/* The purpose of this register is to speed up the execution */
+DEVICE_PROP *pProperty;
+/* Temporary save the state of Rx & Tx status. */
+/* Whenever the Rx or Tx state is changed, its value is saved */
+/* in this variable first and will be set to the EPRB or EPRA */
+/* at the end of interrupt process */
+uint16_t SaveState ;
+uint16_t wInterrupt_Mask;
+DEVICE_INFO Device_Info;
+USER_STANDARD_REQUESTS *pUser_Standard_Requests;
+
+/* Extern variables ----------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/*******************************************************************************
+* Function Name : USB_Init
+* Description : USB system initialization
+* Input : None.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void USB_Init(void)
+{
+ pInformation = &Device_Info;
+ pInformation->ControlState = 2;
+ pProperty = &Device_Property;
+ pUser_Standard_Requests = &User_Standard_Requests;
+ /* Initialize devices one by one */
+ pProperty->Init();
+}
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/src/usb_int.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/src/usb_int.c
new file mode 100644
index 00000000..9ebe8b63
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/src/usb_int.c
@@ -0,0 +1,188 @@
+/******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+* File Name : usb_int.c
+* Author : MCD Application Team
+* Version : V3.3.0
+* Date : 21-March-2011
+* Description : Endpoint CTR (Low and High) interrupt's service routines
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+#ifndef STM32F10X_CL
+
+/* Includes ------------------------------------------------------------------*/
+#include "usb_lib.h"
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+__IO uint16_t SaveRState;
+__IO uint16_t SaveTState;
+
+/* Extern variables ----------------------------------------------------------*/
+extern void (*pEpInt_IN[7])(void); /* Handles IN interrupts */
+extern void (*pEpInt_OUT[7])(void); /* Handles OUT interrupts */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/*******************************************************************************
+* Function Name : CTR_LP.
+* Description : Low priority Endpoint Correct Transfer interrupt's service
+* routine.
+* Input : None.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void CTR_LP(void)
+{
+ __IO uint16_t wEPVal = 0;
+ /* stay in loop while pending interrupts */
+ while (((wIstr = _GetISTR()) & ISTR_CTR) != 0)
+ {
+ /* extract highest priority endpoint number */
+ EPindex = (uint8_t)(wIstr & ISTR_EP_ID);
+ if (EPindex == 0)
+ {
+ /* Decode and service control endpoint interrupt */
+ /* calling related service routine */
+ /* (Setup0_Process, In0_Process, Out0_Process) */
+
+ /* save RX & TX status */
+ /* and set both to NAK */
+
+
+ SaveRState = _GetENDPOINT(ENDP0);
+ SaveTState = SaveRState & EPTX_STAT;
+ SaveRState &= EPRX_STAT;
+
+ _SetEPRxTxStatus(ENDP0,EP_RX_NAK,EP_TX_NAK);
+
+ /* DIR bit = origin of the interrupt */
+
+ if ((wIstr & ISTR_DIR) == 0)
+ {
+ /* DIR = 0 */
+
+ /* DIR = 0 => IN int */
+ /* DIR = 0 implies that (EP_CTR_TX = 1) always */
+
+
+ _ClearEP_CTR_TX(ENDP0);
+ In0_Process();
+
+ /* before terminate set Tx & Rx status */
+
+ _SetEPRxTxStatus(ENDP0,SaveRState,SaveTState);
+ return;
+ }
+ else
+ {
+ /* DIR = 1 */
+
+ /* DIR = 1 & CTR_RX => SETUP or OUT int */
+ /* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */
+
+ wEPVal = _GetENDPOINT(ENDP0);
+
+ if ((wEPVal &EP_SETUP) != 0)
+ {
+ _ClearEP_CTR_RX(ENDP0); /* SETUP bit kept frozen while CTR_RX = 1 */
+ Setup0_Process();
+ /* before terminate set Tx & Rx status */
+
+ _SetEPRxTxStatus(ENDP0,SaveRState,SaveTState);
+ return;
+ }
+
+ else if ((wEPVal & EP_CTR_RX) != 0)
+ {
+ _ClearEP_CTR_RX(ENDP0);
+ Out0_Process();
+ /* before terminate set Tx & Rx status */
+
+ _SetEPRxTxStatus(ENDP0,SaveRState,SaveTState);
+ return;
+ }
+ }
+ }/* if(EPindex == 0) */
+ else
+ {
+ /* Decode and service non control endpoints interrupt */
+
+ /* process related endpoint register */
+ wEPVal = _GetENDPOINT(EPindex);
+ if ((wEPVal & EP_CTR_RX) != 0)
+ {
+ /* clear int flag */
+ _ClearEP_CTR_RX(EPindex);
+
+ /* call OUT service function */
+ (*pEpInt_OUT[EPindex-1])();
+
+ } /* if((wEPVal & EP_CTR_RX) */
+
+ if ((wEPVal & EP_CTR_TX) != 0)
+ {
+ /* clear int flag */
+ _ClearEP_CTR_TX(EPindex);
+
+ /* call IN service function */
+ (*pEpInt_IN[EPindex-1])();
+ } /* if((wEPVal & EP_CTR_TX) != 0) */
+
+ }/* if(EPindex == 0) else */
+
+ }/* while(...) */
+}
+
+/*******************************************************************************
+* Function Name : CTR_HP.
+* Description : High Priority Endpoint Correct Transfer interrupt's service
+* routine.
+* Input : None.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void CTR_HP(void)
+{
+ uint32_t wEPVal = 0;
+
+ while (((wIstr = _GetISTR()) & ISTR_CTR) != 0)
+ {
+ _SetISTR((uint16_t)CLR_CTR); /* clear CTR flag */
+ /* extract highest priority endpoint number */
+ EPindex = (uint8_t)(wIstr & ISTR_EP_ID);
+ /* process related endpoint register */
+ wEPVal = _GetENDPOINT(EPindex);
+ if ((wEPVal & EP_CTR_RX) != 0)
+ {
+ /* clear int flag */
+ _ClearEP_CTR_RX(EPindex);
+
+ /* call OUT service function */
+ (*pEpInt_OUT[EPindex-1])();
+
+ } /* if((wEPVal & EP_CTR_RX) */
+ else if ((wEPVal & EP_CTR_TX) != 0)
+ {
+ /* clear int flag */
+ _ClearEP_CTR_TX(EPindex);
+
+ /* call IN service function */
+ (*pEpInt_IN[EPindex-1])();
+
+
+ } /* if((wEPVal & EP_CTR_TX) != 0) */
+
+ }/* while(...) */
+}
+
+#endif /* STM32F10X_CL */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/src/usb_mem.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/src/usb_mem.c
new file mode 100644
index 00000000..f9203f4f
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/src/usb_mem.c
@@ -0,0 +1,75 @@
+/******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+* File Name : usb_mem.c
+* Author : MCD Application Team
+* Version : V3.3.0
+* Date : 21-March-2011
+* Description : Utility functions for memory transfers to/from PMA
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+#ifndef STM32F10X_CL
+
+/* Includes ------------------------------------------------------------------*/
+#include "usb_lib.h"
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Extern variables ----------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/*******************************************************************************
+* Function Name : UserToPMABufferCopy
+* Description : Copy a buffer from user memory area to packet memory area (PMA)
+* Input : - pbUsrBuf: pointer to user memory area.
+* - wPMABufAddr: address into PMA.
+* - wNBytes: no. of bytes to be copied.
+* Output : None.
+* Return : None .
+*******************************************************************************/
+void UserToPMABufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
+{
+ uint32_t n = (wNBytes + 1) >> 1; /* n = (wNBytes + 1) / 2 */
+ uint32_t i, temp1, temp2;
+ uint16_t *pdwVal;
+ pdwVal = (uint16_t *)(wPMABufAddr * 2 + PMAAddr);
+ for (i = n; i != 0; i--)
+ {
+ temp1 = (uint16_t) * pbUsrBuf;
+ pbUsrBuf++;
+ temp2 = temp1 | (uint16_t) * pbUsrBuf << 8;
+ *pdwVal++ = temp2;
+ pdwVal++;
+ pbUsrBuf++;
+ }
+}
+/*******************************************************************************
+* Function Name : PMAToUserBufferCopy
+* Description : Copy a buffer from user memory area to packet memory area (PMA)
+* Input : - pbUsrBuf = pointer to user memory area.
+* - wPMABufAddr = address into PMA.
+* - wNBytes = no. of bytes to be copied.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void PMAToUserBufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
+{
+ uint32_t n = (wNBytes + 1) >> 1;/* /2*/
+ uint32_t i;
+ uint32_t *pdwVal;
+ pdwVal = (uint32_t *)(wPMABufAddr * 2 + PMAAddr);
+ for (i = n; i != 0; i--)
+ {
+ *(uint16_t*)pbUsrBuf++ = *pdwVal++;
+ pbUsrBuf++;
+ }
+}
+
+#endif /* STM32F10X_CL */
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/src/usb_regs.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/src/usb_regs.c
new file mode 100644
index 00000000..8bfa8edf
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/src/usb_regs.c
@@ -0,0 +1,750 @@
+/******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+* File Name : usb_regs.c
+* Author : MCD Application Team
+* Version : V3.3.0
+* Date : 21-March-2011
+* Description : Interface functions to USB cell registers
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+#ifndef STM32F10X_CL
+
+/* Includes ------------------------------------------------------------------*/
+#include "usb_lib.h"
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Extern variables ----------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/*******************************************************************************
+* Function Name : SetCNTR.
+* Description : Set the CNTR register value.
+* Input : wRegValue: new register value.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetCNTR(uint16_t wRegValue)
+{
+ _SetCNTR(wRegValue);
+}
+
+/*******************************************************************************
+* Function Name : GetCNTR.
+* Description : returns the CNTR register value.
+* Input : None.
+* Output : None.
+* Return : CNTR register Value.
+*******************************************************************************/
+uint16_t GetCNTR(void)
+{
+ return(_GetCNTR());
+}
+
+/*******************************************************************************
+* Function Name : SetISTR.
+* Description : Set the ISTR register value.
+* Input : wRegValue: new register value.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetISTR(uint16_t wRegValue)
+{
+ _SetISTR(wRegValue);
+}
+
+/*******************************************************************************
+* Function Name : GetISTR
+* Description : Returns the ISTR register value.
+* Input : None.
+* Output : None.
+* Return : ISTR register Value
+*******************************************************************************/
+uint16_t GetISTR(void)
+{
+ return(_GetISTR());
+}
+
+/*******************************************************************************
+* Function Name : GetFNR
+* Description : Returns the FNR register value.
+* Input : None.
+* Output : None.
+* Return : FNR register Value
+*******************************************************************************/
+uint16_t GetFNR(void)
+{
+ return(_GetFNR());
+}
+
+/*******************************************************************************
+* Function Name : SetDADDR
+* Description : Set the DADDR register value.
+* Input : wRegValue: new register value.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetDADDR(uint16_t wRegValue)
+{
+ _SetDADDR(wRegValue);
+}
+
+/*******************************************************************************
+* Function Name : GetDADDR
+* Description : Returns the DADDR register value.
+* Input : None.
+* Output : None.
+* Return : DADDR register Value
+*******************************************************************************/
+uint16_t GetDADDR(void)
+{
+ return(_GetDADDR());
+}
+
+/*******************************************************************************
+* Function Name : SetBTABLE
+* Description : Set the BTABLE.
+* Input : wRegValue: New register value.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetBTABLE(uint16_t wRegValue)
+{
+ _SetBTABLE(wRegValue);
+}
+
+/*******************************************************************************
+* Function Name : GetBTABLE.
+* Description : Returns the BTABLE register value.
+* Input : None.
+* Output : None.
+* Return : BTABLE address.
+*******************************************************************************/
+uint16_t GetBTABLE(void)
+{
+ return(_GetBTABLE());
+}
+
+/*******************************************************************************
+* Function Name : SetENDPOINT
+* Description : Set the Endpoint register value.
+* Input : bEpNum: Endpoint Number.
+* wRegValue.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetENDPOINT(uint8_t bEpNum, uint16_t wRegValue)
+{
+ _SetENDPOINT(bEpNum, wRegValue);
+}
+
+/*******************************************************************************
+* Function Name : GetENDPOINT
+* Description : Return the Endpoint register value.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Endpoint register value.
+*******************************************************************************/
+uint16_t GetENDPOINT(uint8_t bEpNum)
+{
+ return(_GetENDPOINT(bEpNum));
+}
+
+/*******************************************************************************
+* Function Name : SetEPType
+* Description : sets the type in the endpoint register.
+* Input : bEpNum: Endpoint Number.
+* wType: type definition.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPType(uint8_t bEpNum, uint16_t wType)
+{
+ _SetEPType(bEpNum, wType);
+}
+
+/*******************************************************************************
+* Function Name : GetEPType
+* Description : Returns the endpoint type.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Endpoint Type
+*******************************************************************************/
+uint16_t GetEPType(uint8_t bEpNum)
+{
+ return(_GetEPType(bEpNum));
+}
+
+/*******************************************************************************
+* Function Name : SetEPTxStatus
+* Description : Set the status of Tx endpoint.
+* Input : bEpNum: Endpoint Number.
+* wState: new state.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPTxStatus(uint8_t bEpNum, uint16_t wState)
+{
+ _SetEPTxStatus(bEpNum, wState);
+}
+
+/*******************************************************************************
+* Function Name : SetEPRxStatus
+* Description : Set the status of Rx endpoint.
+* Input : bEpNum: Endpoint Number.
+* wState: new state.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPRxStatus(uint8_t bEpNum, uint16_t wState)
+{
+ _SetEPRxStatus(bEpNum, wState);
+}
+
+/*******************************************************************************
+* Function Name : SetDouBleBuffEPStall
+* Description : sets the status for Double Buffer Endpoint to STALL
+* Input : bEpNum: Endpoint Number.
+* bDir: Endpoint direction.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetDouBleBuffEPStall(uint8_t bEpNum, uint8_t bDir)
+{
+ uint16_t Endpoint_DTOG_Status;
+ Endpoint_DTOG_Status = GetENDPOINT(bEpNum);
+ if (bDir == EP_DBUF_OUT)
+ { /* OUT double buffered endpoint */
+ _SetENDPOINT(bEpNum, Endpoint_DTOG_Status & ~EPRX_DTOG1);
+ }
+ else if (bDir == EP_DBUF_IN)
+ { /* IN double buffered endpoint */
+ _SetENDPOINT(bEpNum, Endpoint_DTOG_Status & ~EPTX_DTOG1);
+ }
+}
+
+/*******************************************************************************
+* Function Name : GetEPTxStatus
+* Description : Returns the endpoint Tx status.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Endpoint TX Status
+*******************************************************************************/
+uint16_t GetEPTxStatus(uint8_t bEpNum)
+{
+ return(_GetEPTxStatus(bEpNum));
+}
+
+/*******************************************************************************
+* Function Name : GetEPRxStatus
+* Description : Returns the endpoint Rx status.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Endpoint RX Status
+*******************************************************************************/
+uint16_t GetEPRxStatus(uint8_t bEpNum)
+{
+ return(_GetEPRxStatus(bEpNum));
+}
+
+/*******************************************************************************
+* Function Name : SetEPTxValid
+* Description : Valid the endpoint Tx Status.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPTxValid(uint8_t bEpNum)
+{
+ _SetEPTxStatus(bEpNum, EP_TX_VALID);
+}
+
+/*******************************************************************************
+* Function Name : SetEPRxValid
+* Description : Valid the endpoint Rx Status.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPRxValid(uint8_t bEpNum)
+{
+ _SetEPRxStatus(bEpNum, EP_RX_VALID);
+}
+
+/*******************************************************************************
+* Function Name : SetEP_KIND
+* Description : Clear the EP_KIND bit.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEP_KIND(uint8_t bEpNum)
+{
+ _SetEP_KIND(bEpNum);
+}
+
+/*******************************************************************************
+* Function Name : ClearEP_KIND
+* Description : set the EP_KIND bit.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void ClearEP_KIND(uint8_t bEpNum)
+{
+ _ClearEP_KIND(bEpNum);
+}
+/*******************************************************************************
+* Function Name : Clear_Status_Out
+* Description : Clear the Status Out of the related Endpoint
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void Clear_Status_Out(uint8_t bEpNum)
+{
+ _ClearEP_KIND(bEpNum);
+}
+/*******************************************************************************
+* Function Name : Set_Status_Out
+* Description : Set the Status Out of the related Endpoint
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void Set_Status_Out(uint8_t bEpNum)
+{
+ _SetEP_KIND(bEpNum);
+}
+/*******************************************************************************
+* Function Name : SetEPDoubleBuff
+* Description : Enable the double buffer feature for the endpoint.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPDoubleBuff(uint8_t bEpNum)
+{
+ _SetEP_KIND(bEpNum);
+}
+/*******************************************************************************
+* Function Name : ClearEPDoubleBuff
+* Description : Disable the double buffer feature for the endpoint.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void ClearEPDoubleBuff(uint8_t bEpNum)
+{
+ _ClearEP_KIND(bEpNum);
+}
+/*******************************************************************************
+* Function Name : GetTxStallStatus
+* Description : Returns the Stall status of the Tx endpoint.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Tx Stall status.
+*******************************************************************************/
+uint16_t GetTxStallStatus(uint8_t bEpNum)
+{
+ return(_GetTxStallStatus(bEpNum));
+}
+/*******************************************************************************
+* Function Name : GetRxStallStatus
+* Description : Returns the Stall status of the Rx endpoint.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Rx Stall status.
+*******************************************************************************/
+uint16_t GetRxStallStatus(uint8_t bEpNum)
+{
+ return(_GetRxStallStatus(bEpNum));
+}
+/*******************************************************************************
+* Function Name : ClearEP_CTR_RX
+* Description : Clear the CTR_RX bit.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void ClearEP_CTR_RX(uint8_t bEpNum)
+{
+ _ClearEP_CTR_RX(bEpNum);
+}
+/*******************************************************************************
+* Function Name : ClearEP_CTR_TX
+* Description : Clear the CTR_TX bit.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void ClearEP_CTR_TX(uint8_t bEpNum)
+{
+ _ClearEP_CTR_TX(bEpNum);
+}
+/*******************************************************************************
+* Function Name : ToggleDTOG_RX
+* Description : Toggle the DTOG_RX bit.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void ToggleDTOG_RX(uint8_t bEpNum)
+{
+ _ToggleDTOG_RX(bEpNum);
+}
+/*******************************************************************************
+* Function Name : ToggleDTOG_TX
+* Description : Toggle the DTOG_TX bit.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void ToggleDTOG_TX(uint8_t bEpNum)
+{
+ _ToggleDTOG_TX(bEpNum);
+}
+/*******************************************************************************
+* Function Name : ClearDTOG_RX.
+* Description : Clear the DTOG_RX bit.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void ClearDTOG_RX(uint8_t bEpNum)
+{
+ _ClearDTOG_RX(bEpNum);
+}
+/*******************************************************************************
+* Function Name : ClearDTOG_TX.
+* Description : Clear the DTOG_TX bit.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void ClearDTOG_TX(uint8_t bEpNum)
+{
+ _ClearDTOG_TX(bEpNum);
+}
+/*******************************************************************************
+* Function Name : SetEPAddress
+* Description : Set the endpoint address.
+* Input : bEpNum: Endpoint Number.
+* bAddr: New endpoint address.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPAddress(uint8_t bEpNum, uint8_t bAddr)
+{
+ _SetEPAddress(bEpNum, bAddr);
+}
+/*******************************************************************************
+* Function Name : GetEPAddress
+* Description : Get the endpoint address.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Endpoint address.
+*******************************************************************************/
+uint8_t GetEPAddress(uint8_t bEpNum)
+{
+ return(_GetEPAddress(bEpNum));
+}
+/*******************************************************************************
+* Function Name : SetEPTxAddr
+* Description : Set the endpoint Tx buffer address.
+* Input : bEpNum: Endpoint Number.
+* wAddr: new address.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPTxAddr(uint8_t bEpNum, uint16_t wAddr)
+{
+ _SetEPTxAddr(bEpNum, wAddr);
+}
+/*******************************************************************************
+* Function Name : SetEPRxAddr
+* Description : Set the endpoint Rx buffer address.
+* Input : bEpNum: Endpoint Number.
+* wAddr: new address.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPRxAddr(uint8_t bEpNum, uint16_t wAddr)
+{
+ _SetEPRxAddr(bEpNum, wAddr);
+}
+/*******************************************************************************
+* Function Name : GetEPTxAddr
+* Description : Returns the endpoint Tx buffer address.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Rx buffer address.
+*******************************************************************************/
+uint16_t GetEPTxAddr(uint8_t bEpNum)
+{
+ return(_GetEPTxAddr(bEpNum));
+}
+/*******************************************************************************
+* Function Name : GetEPRxAddr.
+* Description : Returns the endpoint Rx buffer address.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Rx buffer address.
+*******************************************************************************/
+uint16_t GetEPRxAddr(uint8_t bEpNum)
+{
+ return(_GetEPRxAddr(bEpNum));
+}
+/*******************************************************************************
+* Function Name : SetEPTxCount.
+* Description : Set the Tx count.
+* Input : bEpNum: Endpoint Number.
+* wCount: new count value.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPTxCount(uint8_t bEpNum, uint16_t wCount)
+{
+ _SetEPTxCount(bEpNum, wCount);
+}
+/*******************************************************************************
+* Function Name : SetEPCountRxReg.
+* Description : Set the Count Rx Register value.
+* Input : *pdwReg: point to the register.
+* wCount: the new register value.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPCountRxReg(uint32_t *pdwReg, uint16_t wCount)
+{
+ _SetEPCountRxReg(dwReg, wCount);
+}
+/*******************************************************************************
+* Function Name : SetEPRxCount
+* Description : Set the Rx count.
+* Input : bEpNum: Endpoint Number.
+* wCount: the new count value.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPRxCount(uint8_t bEpNum, uint16_t wCount)
+{
+ _SetEPRxCount(bEpNum, wCount);
+}
+/*******************************************************************************
+* Function Name : GetEPTxCount
+* Description : Get the Tx count.
+* Input : bEpNum: Endpoint Number.
+* Output : None
+* Return : Tx count value.
+*******************************************************************************/
+uint16_t GetEPTxCount(uint8_t bEpNum)
+{
+ return(_GetEPTxCount(bEpNum));
+}
+/*******************************************************************************
+* Function Name : GetEPRxCount
+* Description : Get the Rx count.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Rx count value.
+*******************************************************************************/
+uint16_t GetEPRxCount(uint8_t bEpNum)
+{
+ return(_GetEPRxCount(bEpNum));
+}
+/*******************************************************************************
+* Function Name : SetEPDblBuffAddr
+* Description : Set the addresses of the buffer 0 and 1.
+* Input : bEpNum: Endpoint Number.
+* wBuf0Addr: new address of buffer 0.
+* wBuf1Addr: new address of buffer 1.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPDblBuffAddr(uint8_t bEpNum, uint16_t wBuf0Addr, uint16_t wBuf1Addr)
+{
+ _SetEPDblBuffAddr(bEpNum, wBuf0Addr, wBuf1Addr);
+}
+/*******************************************************************************
+* Function Name : SetEPDblBuf0Addr
+* Description : Set the Buffer 1 address.
+* Input : bEpNum: Endpoint Number
+* wBuf0Addr: new address.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPDblBuf0Addr(uint8_t bEpNum, uint16_t wBuf0Addr)
+{
+ _SetEPDblBuf0Addr(bEpNum, wBuf0Addr);
+}
+/*******************************************************************************
+* Function Name : SetEPDblBuf1Addr
+* Description : Set the Buffer 1 address.
+* Input : bEpNum: Endpoint Number
+* wBuf1Addr: new address.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPDblBuf1Addr(uint8_t bEpNum, uint16_t wBuf1Addr)
+{
+ _SetEPDblBuf1Addr(bEpNum, wBuf1Addr);
+}
+/*******************************************************************************
+* Function Name : GetEPDblBuf0Addr
+* Description : Returns the address of the Buffer 0.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : None.
+*******************************************************************************/
+uint16_t GetEPDblBuf0Addr(uint8_t bEpNum)
+{
+ return(_GetEPDblBuf0Addr(bEpNum));
+}
+/*******************************************************************************
+* Function Name : GetEPDblBuf1Addr
+* Description : Returns the address of the Buffer 1.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Address of the Buffer 1.
+*******************************************************************************/
+uint16_t GetEPDblBuf1Addr(uint8_t bEpNum)
+{
+ return(_GetEPDblBuf1Addr(bEpNum));
+}
+/*******************************************************************************
+* Function Name : SetEPDblBuffCount
+* Description : Set the number of bytes for a double Buffer
+* endpoint.
+* Input : bEpNum,bDir, wCount
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPDblBuffCount(uint8_t bEpNum, uint8_t bDir, uint16_t wCount)
+{
+ _SetEPDblBuffCount(bEpNum, bDir, wCount);
+}
+/*******************************************************************************
+* Function Name : SetEPDblBuf0Count
+* Description : Set the number of bytes in the buffer 0 of a double Buffer
+* endpoint.
+* Input : bEpNum, bDir, wCount
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPDblBuf0Count(uint8_t bEpNum, uint8_t bDir, uint16_t wCount)
+{
+ _SetEPDblBuf0Count(bEpNum, bDir, wCount);
+}
+/*******************************************************************************
+* Function Name : SetEPDblBuf1Count
+* Description : Set the number of bytes in the buffer 0 of a double Buffer
+* endpoint.
+* Input : bEpNum, bDir, wCount
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void SetEPDblBuf1Count(uint8_t bEpNum, uint8_t bDir, uint16_t wCount)
+{
+ _SetEPDblBuf1Count(bEpNum, bDir, wCount);
+}
+/*******************************************************************************
+* Function Name : GetEPDblBuf0Count
+* Description : Returns the number of byte received in the buffer 0 of a double
+* Buffer endpoint.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Endpoint Buffer 0 count
+*******************************************************************************/
+uint16_t GetEPDblBuf0Count(uint8_t bEpNum)
+{
+ return(_GetEPDblBuf0Count(bEpNum));
+}
+/*******************************************************************************
+* Function Name : GetEPDblBuf1Count
+* Description : Returns the number of data received in the buffer 1 of a double
+* Buffer endpoint.
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : Endpoint Buffer 1 count.
+*******************************************************************************/
+uint16_t GetEPDblBuf1Count(uint8_t bEpNum)
+{
+ return(_GetEPDblBuf1Count(bEpNum));
+}
+/*******************************************************************************
+* Function Name : GetEPDblBufDir
+* Description : gets direction of the double buffered endpoint
+* Input : bEpNum: Endpoint Number.
+* Output : None.
+* Return : EP_DBUF_OUT, EP_DBUF_IN,
+* EP_DBUF_ERR if the endpoint counter not yet programmed.
+*******************************************************************************/
+EP_DBUF_DIR GetEPDblBufDir(uint8_t bEpNum)
+{
+ if ((uint16_t)(*_pEPRxCount(bEpNum) & 0xFC00) != 0)
+ return(EP_DBUF_OUT);
+ else if (((uint16_t)(*_pEPTxCount(bEpNum)) & 0x03FF) != 0)
+ return(EP_DBUF_IN);
+ else
+ return(EP_DBUF_ERR);
+}
+/*******************************************************************************
+* Function Name : FreeUserBuffer
+* Description : free buffer used from the application realizing it to the line
+ toggles bit SW_BUF in the double buffered endpoint register
+* Input : bEpNum, bDir
+* Output : None.
+* Return : None.
+*******************************************************************************/
+void FreeUserBuffer(uint8_t bEpNum, uint8_t bDir)
+{
+ if (bDir == EP_DBUF_OUT)
+ { /* OUT double buffered endpoint */
+ _ToggleDTOG_TX(bEpNum);
+ }
+ else if (bDir == EP_DBUF_IN)
+ { /* IN double buffered endpoint */
+ _ToggleDTOG_RX(bEpNum);
+ }
+}
+
+/*******************************************************************************
+* Function Name : ToWord
+* Description : merge two byte in a word.
+* Input : bh: byte high, bl: bytes low.
+* Output : None.
+* Return : resulted word.
+*******************************************************************************/
+uint16_t ToWord(uint8_t bh, uint8_t bl)
+{
+ uint16_t wRet;
+ wRet = (uint16_t)bl | ((uint16_t)bh << 8);
+ return(wRet);
+}
+/*******************************************************************************
+* Function Name : ByteSwap
+* Description : Swap two byte in a word.
+* Input : wSwW: word to Swap.
+* Output : None.
+* Return : resulted word.
+*******************************************************************************/
+uint16_t ByteSwap(uint16_t wSwW)
+{
+ uint8_t bTemp;
+ uint16_t wRet;
+ bTemp = (uint8_t)(wSwW & 0xff);
+ wRet = (wSwW >> 8) | ((uint16_t)bTemp << 8);
+ return(wRet);
+}
+
+#endif /* STM32F10X_CL */
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/src/usb_sil.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/src/usb_sil.c
new file mode 100644
index 00000000..6638cfcc
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/USB_FS_DEVICE/src/usb_sil.c
@@ -0,0 +1,126 @@
+/******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+* File Name : usb_sil.c
+* Author : MCD Application Team
+* Version : V3.3.0
+* Date : 21-March-2011
+* Description : Simplified Interface Layer for Global Initialization and
+* Endpoint Rea/Write operations.
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Includes ------------------------------------------------------------------*/
+#include "usb_lib.h"
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Extern variables ----------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/*******************************************************************************
+* Function Name : USB_SIL_Init
+* Description : Initialize the USB Device IP and the Endpoint 0.
+* Input : None.
+* Output : None.
+* Return : Status.
+*******************************************************************************/
+uint32_t USB_SIL_Init(void)
+{
+#ifndef STM32F10X_CL
+
+ /* USB interrupts initialization */
+ /* clear pending interrupts */
+ _SetISTR(0);
+ wInterrupt_Mask = IMR_MSK;
+ /* set interrupts mask */
+ _SetCNTR(wInterrupt_Mask);
+
+#else
+
+ /* Perform OTG Device initialization procedure (including EP0 init) */
+ OTG_DEV_Init();
+
+#endif /* STM32F10X_CL */
+
+ return 0;
+}
+
+/*******************************************************************************
+* Function Name : USB_SIL_Write
+* Description : Write a buffer of data to a selected endpoint.
+* Input : - bEpAddr: The address of the non control endpoint.
+* - pBufferPointer: The pointer to the buffer of data to be written
+* to the endpoint.
+* - wBufferSize: Number of data to be written (in bytes).
+* Output : None.
+* Return : Status.
+*******************************************************************************/
+uint32_t USB_SIL_Write(uint8_t bEpAddr, uint8_t* pBufferPointer, uint32_t wBufferSize)
+{
+#ifndef STM32F10X_CL
+
+ /* Use the memory interface function to write to the selected endpoint */
+ UserToPMABufferCopy(pBufferPointer, GetEPTxAddr(bEpAddr & 0x7F), wBufferSize);
+
+ /* Update the data length in the control register */
+ SetEPTxCount((bEpAddr & 0x7F), wBufferSize);
+
+#else
+
+ /* Use the PCD interface layer function to write to the selected endpoint */
+ PCD_EP_Write (bEpAddr, pBufferPointer, wBufferSize);
+
+#endif /* STM32F10X_CL */
+
+ return 0;
+}
+
+/*******************************************************************************
+* Function Name : USB_SIL_Read
+* Description : Write a buffer of data to a selected endpoint.
+* Input : - bEpAddr: The address of the non control endpoint.
+* - pBufferPointer: The pointer to which will be saved the
+* received data buffer.
+* Output : None.
+* Return : Number of received data (in Bytes).
+*******************************************************************************/
+uint32_t USB_SIL_Read(uint8_t bEpAddr, uint8_t* pBufferPointer)
+{
+ uint32_t DataLength = 0;
+
+#ifndef STM32F10X_CL
+
+ /* Get the number of received data on the selected Endpoint */
+ DataLength = GetEPRxCount(bEpAddr & 0x7F);
+
+ /* Use the memory interface function to write to the selected endpoint */
+ PMAToUserBufferCopy(pBufferPointer, GetEPRxAddr(bEpAddr & 0x7F), DataLength);
+
+#else
+
+ USB_OTG_EP *ep;
+
+ /* Get the structure pointer of the selected Endpoint */
+ ep = PCD_GetOutEP(bEpAddr);
+
+ /* Get the number of received data */
+ DataLength = ep->xfer_len;
+
+ /* Use the PCD interface layer function to read the selected endpoint */
+ PCD_EP_Read (bEpAddr, pBufferPointer, DataLength);
+
+#endif /* STM32F10X_CL */
+
+ /* Return the number of received data */
+ return DataLength;
+}
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/cmsis/core_cm3.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/cmsis/core_cm3.h
new file mode 100644
index 00000000..efac390f
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/cmsis/core_cm3.h
@@ -0,0 +1,1550 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V3.00
+ * @date 03. February 2012
+ *
+ * @note
+ * Copyright (C) 2009-2012 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+
+
+
+
+
+
+
+
+ + +
+
+ |
+
+
+
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** \ingroup Cortex_M3 + @{ + */ + +/* CMSIS CM3 definitions */ +#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \ + __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x03) /*!< Cortex-M Core */ + + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ + #define __STATIC_INLINE static inline + +#elif defined ( __TMS470__ ) + #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + #define __STATIC_INLINE static inline + +#endif + +/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all +*/ +#define __FPU_USED 0 + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TMS470__ ) + #if defined __TI__VFP_SUPPORT____ + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + /* add preprocessor checks */ +#endif + +#include
© COPYRIGHT 2012 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f10x
+ * @{
+ */
+
+#ifndef __STM32F10x_H
+#define __STM32F10x_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL)
+ /* #define STM32F10X_LD */ /*!< STM32F10X_LD: STM32 Low density devices */
+ /* #define STM32F10X_LD_VL */ /*!< STM32F10X_LD_VL: STM32 Low density Value Line devices */
+ /* #define STM32F10X_MD */ /*!< STM32F10X_MD: STM32 Medium density devices */
+ /* #define STM32F10X_MD_VL */ /*!< STM32F10X_MD_VL: STM32 Medium density Value Line devices */
+ /* #define STM32F10X_HD */ /*!< STM32F10X_HD: STM32 High density devices */
+ /* #define STM32F10X_HD_VL */ /*!< STM32F10X_HD_VL: STM32 High density value line devices */
+ /* #define STM32F10X_XL */ /*!< STM32F10X_XL: STM32 XL-density devices */
+ /* #define STM32F10X_CL */ /*!< STM32F10X_CL: STM32 Connectivity line devices */
+#endif
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+
+ - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers
+ where the Flash memory density ranges between 16 and 32 Kbytes.
+ - Low-density value line devices are STM32F100xx microcontrollers where the Flash
+ memory density ranges between 16 and 32 Kbytes.
+ - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers
+ where the Flash memory density ranges between 64 and 128 Kbytes.
+ - Medium-density value line devices are STM32F100xx microcontrollers where the
+ Flash memory density ranges between 64 and 128 Kbytes.
+ - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
+ the Flash memory density ranges between 256 and 512 Kbytes.
+ - High-density value line devices are STM32F100xx microcontrollers where the
+ Flash memory density ranges between 256 and 512 Kbytes.
+ - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
+ the Flash memory density ranges between 512 and 1024 Kbytes.
+ - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
+ */
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL)
+ #error "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)"
+#endif
+
+#if !defined (USE_STDPERIPH_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+ /*#define USE_STDPERIPH_DRIVER*/
+#endif /* USE_STDPERIPH_DRIVER */
+
+/**
+ * @brief In the following line adjust the value of External High Speed oscillator (HSE)
+ used in your application
+
+ Tip: To avoid modifying this file each time you need to use different HSE, you
+ can define the HSE value in your toolchain compiler preprocessor.
+ */
+#if !defined HSE_VALUE
+ #ifdef STM32F10X_CL
+ #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
+ #else
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+ #endif /* STM32F10X_CL */
+#endif /* HSE_VALUE */
+
+/**
+ * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
+ Timeout value
+ */
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint16_t)0x0500) /*!< Time out for HSE start up */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief STM32F10x Standard Peripheral Library version number
+ */
+#define __STM32F10X_STDPERIPH_VERSION_MAIN (0x03) /*!< [31:24] main version */
+#define __STM32F10X_STDPERIPH_VERSION_SUB1 (0x06) /*!< [23:16] sub1 version */
+#define __STM32F10X_STDPERIPH_VERSION_SUB2 (0x01) /*!< [15:8] sub2 version */
+#define __STM32F10X_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F10X_STDPERIPH_VERSION ((__STM32F10X_STDPERIPH_VERSION_MAIN << 24)\
+ |(__STM32F10X_STDPERIPH_VERSION_SUB1 << 16)\
+ |(__STM32F10X_STDPERIPH_VERSION_SUB2 << 8)\
+ |(__STM32F10X_STDPERIPH_VERSION_RC))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M3 Processor and Core Peripherals
+ */
+#ifdef STM32F10X_XL
+ #define __MPU_PRESENT 1 /*!< STM32 XL-density devices provide an MPU */
+#else
+ #define __MPU_PRESENT 0 /*!< Other STM32 devices does not provide an MPU */
+#endif /* STM32F10X_XL */
+#define __CM3_REV 0x0200 /*!< Core Revision r2p0 */
+#define __NVIC_PRIO_BITS 4 /*!< STM32 uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @brief STM32F10x Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum IRQn
+{
+/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
+
+/****** STM32 specific Interrupt Numbers *********************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMPER_IRQn = 2, /*!< Tamper Interrupt */
+ RTC_IRQn = 3, /*!< RTC global Interrupt */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */
+ DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */
+ DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */
+ DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */
+ DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */
+ DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */
+ DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */
+
+#ifdef STM32F10X_LD
+ ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */
+ USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */
+ USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */
+ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
+ CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */
+ TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */
+ TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
+ USBWakeUp_IRQn = 42 /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */
+#endif /* STM32F10X_LD */
+
+#ifdef STM32F10X_LD_VL
+ ADC1_IRQn = 18, /*!< ADC1 global Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */
+ TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */
+ TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
+ CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */
+ TIM7_IRQn = 55 /*!< TIM7 Interrupt */
+#endif /* STM32F10X_LD_VL */
+
+#ifdef STM32F10X_MD
+ ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */
+ USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */
+ USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */
+ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
+ CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */
+ TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */
+ TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
+ USBWakeUp_IRQn = 42 /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */
+#endif /* STM32F10X_MD */
+
+#ifdef STM32F10X_MD_VL
+ ADC1_IRQn = 18, /*!< ADC1 global Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */
+ TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */
+ TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
+ CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */
+ TIM7_IRQn = 55 /*!< TIM7 Interrupt */
+#endif /* STM32F10X_MD_VL */
+
+#ifdef STM32F10X_HD
+ ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */
+ USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */
+ USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */
+ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
+ CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */
+ TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */
+ TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
+ USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */
+ TIM8_BRK_IRQn = 43, /*!< TIM8 Break Interrupt */
+ TIM8_UP_IRQn = 44, /*!< TIM8 Update Interrupt */
+ TIM8_TRG_COM_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt */
+ TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */
+ ADC3_IRQn = 47, /*!< ADC3 global Interrupt */
+ FSMC_IRQn = 48, /*!< FSMC global Interrupt */
+ SDIO_IRQn = 49, /*!< SDIO global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 52, /*!< UART4 global Interrupt */
+ UART5_IRQn = 53, /*!< UART5 global Interrupt */
+ TIM6_IRQn = 54, /*!< TIM6 global Interrupt */
+ TIM7_IRQn = 55, /*!< TIM7 global Interrupt */
+ DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */
+ DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */
+ DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */
+ DMA2_Channel4_5_IRQn = 59 /*!< DMA2 Channel 4 and Channel 5 global Interrupt */
+#endif /* STM32F10X_HD */
+
+#ifdef STM32F10X_HD_VL
+ ADC1_IRQn = 18, /*!< ADC1 global Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */
+ TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */
+ TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
+ CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */
+ TIM12_IRQn = 43, /*!< TIM12 global Interrupt */
+ TIM13_IRQn = 44, /*!< TIM13 global Interrupt */
+ TIM14_IRQn = 45, /*!< TIM14 global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 52, /*!< UART4 global Interrupt */
+ UART5_IRQn = 53, /*!< UART5 global Interrupt */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */
+ TIM7_IRQn = 55, /*!< TIM7 Interrupt */
+ DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */
+ DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */
+ DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */
+ DMA2_Channel4_5_IRQn = 59, /*!< DMA2 Channel 4 and Channel 5 global Interrupt */
+ DMA2_Channel5_IRQn = 60 /*!< DMA2 Channel 5 global Interrupt (DMA2 Channel 5 is
+ mapped at position 60 only if the MISC_REMAP bit in
+ the AFIO_MAPR2 register is set) */
+#endif /* STM32F10X_HD_VL */
+
+#ifdef STM32F10X_XL
+ ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */
+ USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */
+ USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */
+ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
+ CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break Interrupt and TIM9 global Interrupt */
+ TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global Interrupt */
+ TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
+ USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */
+ TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global Interrupt */
+ TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global Interrupt */
+ TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */
+ TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */
+ ADC3_IRQn = 47, /*!< ADC3 global Interrupt */
+ FSMC_IRQn = 48, /*!< FSMC global Interrupt */
+ SDIO_IRQn = 49, /*!< SDIO global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 52, /*!< UART4 global Interrupt */
+ UART5_IRQn = 53, /*!< UART5 global Interrupt */
+ TIM6_IRQn = 54, /*!< TIM6 global Interrupt */
+ TIM7_IRQn = 55, /*!< TIM7 global Interrupt */
+ DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */
+ DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */
+ DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */
+ DMA2_Channel4_5_IRQn = 59 /*!< DMA2 Channel 4 and Channel 5 global Interrupt */
+#endif /* STM32F10X_XL */
+
+#ifdef STM32F10X_CL
+ ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */
+ CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */
+ CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */
+ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
+ CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */
+ TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */
+ TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
+ OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS WakeUp from suspend through EXTI Line Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 52, /*!< UART4 global Interrupt */
+ UART5_IRQn = 53, /*!< UART5 global Interrupt */
+ TIM6_IRQn = 54, /*!< TIM6 global Interrupt */
+ TIM7_IRQn = 55, /*!< TIM7 global Interrupt */
+ DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */
+ DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */
+ DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */
+ DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */
+ DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */
+ ETH_IRQn = 61, /*!< Ethernet global Interrupt */
+ ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */
+ CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */
+ CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */
+ CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */
+ CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */
+ OTG_FS_IRQn = 67 /*!< USB OTG FS global Interrupt */
+#endif /* STM32F10X_CL */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm3.h"
+#include "system_stm32f10x.h"
+#include © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CONF_H
+#define __STM32F10x_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */
+#include "stm32f10x_adc.h"
+#include "stm32f10x_bkp.h"
+#include "stm32f10x_can.h"
+#include "stm32f10x_cec.h"
+#include "stm32f10x_crc.h"
+#include "stm32f10x_dac.h"
+#include "stm32f10x_dbgmcu.h"
+#include "stm32f10x_dma.h"
+#include "stm32f10x_exti.h"
+#include "stm32f10x_flash.h"
+#include "stm32f10x_fsmc.h"
+#include "stm32f10x_gpio.h"
+#include "stm32f10x_i2c.h"
+#include "stm32f10x_iwdg.h"
+#include "stm32f10x_pwr.h"
+#include "stm32f10x_rcc.h"
+#include "stm32f10x_rtc.h"
+#include "stm32f10x_sdio.h"
+#include "stm32f10x_spi.h"
+#include "stm32f10x_tim.h"
+#include "stm32f10x_usart.h"
+#include "stm32f10x_wwdg.h"
+#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line below to expanse the "assert_param" macro in the
+ Standard Peripheral Library drivers code */
+/* #define USE_FULL_ASSERT 1 */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function which reports
+ * the name of the source file and the source line number of the call
+ * that failed. If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#endif /* __STM32F10x_CONF_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/system_stm32f10x.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/system_stm32f10x.c
new file mode 100644
index 00000000..5634cc0b
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/system_stm32f10x.c
@@ -0,0 +1,1105 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f10x.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
+ *
+ * 1. This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
+ * factors, AHB/APBx prescalers and Flash settings).
+ * This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f10x_xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+ * Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to
+ * configure the system clock before to branch to main program.
+ *
+ * 3. If the system clock source selected by user fails to startup, the SystemInit()
+ * function will do nothing and HSI still used as system clock source. User can
+ * add some code to deal with this issue inside the SetSysClock() function.
+ *
+ * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on
+ * the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file.
+ * When HSE is used as system clock source, directly or through PLL, and you
+ * are using different crystal you have to adapt the HSE value to your own
+ * configuration.
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f10x_system
+ * @{
+ */
+
+/** @addtogroup STM32F10x_System_Private_Includes
+ * @{
+ */
+
+#include "stm32f10x.h"
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F10x_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F10x_System_Private_Defines
+ * @{
+ */
+
+/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
+ frequency (after reset the HSI is used as SYSCLK source)
+
+ IMPORTANT NOTE:
+ ==============
+ 1. After each device reset the HSI is used as System clock source.
+
+ 2. Please make sure that the selected System clock doesn't exceed your device's
+ maximum frequency.
+
+ 3. If none of the define below is enabled, the HSI is used as System clock
+ source.
+
+ 4. The System clock configuration functions provided within this file assume that:
+ - For Low, Medium and High density Value line devices an external 8MHz
+ crystal is used to drive the System clock.
+ - For Low, Medium and High density devices an external 8MHz crystal is
+ used to drive the System clock.
+ - For Connectivity line devices an external 25MHz crystal is used to drive
+ the System clock.
+ If you are using different crystal you have to adapt those functions accordingly.
+ */
+
+#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+/* #define SYSCLK_FREQ_HSE HSE_VALUE */
+ #define SYSCLK_FREQ_24MHz 24000000
+#else
+/* #define SYSCLK_FREQ_HSE HSE_VALUE */
+/* #define SYSCLK_FREQ_24MHz 24000000 */
+/* #define SYSCLK_FREQ_36MHz 36000000 */
+/* #define SYSCLK_FREQ_48MHz 48000000 */
+/* #define SYSCLK_FREQ_56MHz 56000000 */
+#define SYSCLK_FREQ_72MHz 72000000
+#endif
+
+/*!< Uncomment the following line if you need to use external SRAM mounted
+ on STM3210E-EVAL board (STM32 High density and XL-density devices) or on
+ STM32100E-EVAL board (STM32 High-density value line devices) as data memory */
+#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
+/* #define DATA_IN_ExtSRAM */
+#endif
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F10x_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F10x_System_Private_Variables
+ * @{
+ */
+
+/*******************************************************************************
+* Clock Definitions
+*******************************************************************************/
+#ifdef SYSCLK_FREQ_HSE
+ uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_24MHz
+ uint32_t SystemCoreClock = SYSCLK_FREQ_24MHz; /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_36MHz
+ uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz; /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_48MHz
+ uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz; /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_56MHz
+ uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz; /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_72MHz
+ uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz; /*!< System Clock Frequency (Core Clock) */
+#else /*!< HSI Selected as System Clock source */
+ uint32_t SystemCoreClock = HSI_VALUE; /*!< System Clock Frequency (Core Clock) */
+#endif
+
+__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F10x_System_Private_FunctionPrototypes
+ * @{
+ */
+
+static void SetSysClock(void);
+
+#ifdef SYSCLK_FREQ_HSE
+ static void SetSysClockToHSE(void);
+#elif defined SYSCLK_FREQ_24MHz
+ static void SetSysClockTo24(void);
+#elif defined SYSCLK_FREQ_36MHz
+ static void SetSysClockTo36(void);
+#elif defined SYSCLK_FREQ_48MHz
+ static void SetSysClockTo48(void);
+#elif defined SYSCLK_FREQ_56MHz
+ static void SetSysClockTo56(void);
+#elif defined SYSCLK_FREQ_72MHz
+ static void SetSysClockTo72(void);
+#endif
+
+#ifdef DATA_IN_ExtSRAM
+ static void SystemInit_ExtMemCtl(void);
+#endif /* DATA_IN_ExtSRAM */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F10x_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system
+ * Initialize the Embedded Flash Interface, the PLL and update the
+ * SystemCoreClock variable.
+ * @note This function should be used only after reset.
+ * @param None
+ * @retval None
+ */
+void SystemInit (void)
+{
+ /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001;
+
+ /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
+#ifndef STM32F10X_CL
+ RCC->CFGR &= (uint32_t)0xF8FF0000;
+#else
+ RCC->CFGR &= (uint32_t)0xF0FF0000;
+#endif /* STM32F10X_CL */
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
+ RCC->CFGR &= (uint32_t)0xFF80FFFF;
+
+#ifdef STM32F10X_CL
+ /* Reset PLL2ON and PLL3ON bits */
+ RCC->CR &= (uint32_t)0xEBFFFFFF;
+
+ /* Disable all interrupts and clear pending bits */
+ RCC->CIR = 0x00FF0000;
+
+ /* Reset CFGR2 register */
+ RCC->CFGR2 = 0x00000000;
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+ /* Disable all interrupts and clear pending bits */
+ RCC->CIR = 0x009F0000;
+
+ /* Reset CFGR2 register */
+ RCC->CFGR2 = 0x00000000;
+#else
+ /* Disable all interrupts and clear pending bits */
+ RCC->CIR = 0x009F0000;
+#endif /* STM32F10X_CL */
+
+#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
+ #ifdef DATA_IN_ExtSRAM
+ SystemInit_ExtMemCtl();
+ #endif /* DATA_IN_ExtSRAM */
+#endif
+
+ /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
+ /* Configure the Flash Latency cycles and enable prefetch buffer */
+ SetSysClock();
+
+/* We disable the vector table mapping if we actively debug because we are doing this in our
+** debugger script. By doing this in the debugger script, we can switch between flash or ram execution.
+** For the release version, please enable the code below by undefining __DONT_INIT_VTABLE
+*/
+
+ /* Configure the Vector Table location add offset address ------------------*/
+ /* If you work ith the STlink for debug, please don't use this. */
+#ifndef __DONT_INIT_VTABLE
+ #ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+ #else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+ #endif
+#else
+#warning For release version do not use __DONT_INIT_VTABLE (see above).
+#endif
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
+ * 8 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
+ * 8 MHz or 25 MHz, depedning on the product used), user has to ensure
+ * that HSE_VALUE is same as the real frequency of the crystal used.
+ * Otherwise, this function may have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate (void)
+{
+ uint32_t tmp = 0, pllmull = 0, pllsource = 0;
+
+#ifdef STM32F10X_CL
+ uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
+#endif /* STM32F10X_CL */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+ uint32_t prediv1factor = 0;
+#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case 0x00: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case 0x04: /* HSE used as system clock */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case 0x08: /* PLL used as system clock */
+
+ /* Get PLL clock source and multiplication factor ----------------------*/
+ pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
+ pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+
+#ifndef STM32F10X_CL
+ pllmull = ( pllmull >> 18) + 2;
+
+ if (pllsource == 0x00)
+ {
+ /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+ SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+ }
+ else
+ {
+ #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+ prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
+ /* HSE oscillator clock selected as PREDIV1 clock entry */
+ SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
+ #else
+ /* HSE selected as PLL clock entry */
+ if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
+ {/* HSE oscillator clock divided by 2 */
+ SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
+ }
+ else
+ {
+ SystemCoreClock = HSE_VALUE * pllmull;
+ }
+ #endif
+ }
+#else
+ pllmull = pllmull >> 18;
+
+ if (pllmull != 0x0D)
+ {
+ pllmull += 2;
+ }
+ else
+ { /* PLL multiplication factor = PLL input clock * 6.5 */
+ pllmull = 13 / 2;
+ }
+
+ if (pllsource == 0x00)
+ {
+ /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+ SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+ }
+ else
+ {/* PREDIV1 selected as PLL clock entry */
+
+ /* Get PREDIV1 clock source and division factor */
+ prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
+ prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
+
+ if (prediv1source == 0)
+ {
+ /* HSE oscillator clock selected as PREDIV1 clock entry */
+ SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
+ }
+ else
+ {/* PLL2 clock selected as PREDIV1 clock entry */
+
+ /* Get PREDIV2 division factor and PLL2 multiplication factor */
+ prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1;
+ pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2;
+ SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;
+ }
+ }
+#endif /* STM32F10X_CL */
+ break;
+
+ default:
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+
+ /* Compute HCLK clock frequency ----------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK clock frequency */
+ SystemCoreClock >>= tmp;
+}
+
+/**
+ * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
+ * @param None
+ * @retval None
+ */
+static void SetSysClock(void)
+{
+#ifdef SYSCLK_FREQ_HSE
+ SetSysClockToHSE();
+#elif defined SYSCLK_FREQ_24MHz
+ SetSysClockTo24();
+#elif defined SYSCLK_FREQ_36MHz
+ SetSysClockTo36();
+#elif defined SYSCLK_FREQ_48MHz
+ SetSysClockTo48();
+#elif defined SYSCLK_FREQ_56MHz
+ SetSysClockTo56();
+#elif defined SYSCLK_FREQ_72MHz
+ SetSysClockTo72();
+#endif
+
+ /* If none of the define above is enabled, the HSI is used as System clock
+ source (default after reset) */
+}
+
+/**
+ * @brief Setup the external memory controller. Called in startup_stm32f10x.s
+ * before jump to __main
+ * @param None
+ * @retval None
+ */
+#ifdef DATA_IN_ExtSRAM
+/**
+ * @brief Setup the external memory controller.
+ * Called in startup_stm32f10x_xx.s/.c before jump to main.
+ * This function configures the external SRAM mounted on STM3210E-EVAL
+ * board (STM32 High density devices). This SRAM will be used as program
+ * data memory (including heap and stack).
+ * @param None
+ * @retval None
+ */
+void SystemInit_ExtMemCtl(void)
+{
+/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is
+ required, then adjust the Register Addresses */
+
+ /* Enable FSMC clock */
+ RCC->AHBENR = 0x00000114;
+
+ /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
+ RCC->APB2ENR = 0x000001E0;
+
+/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/
+/*---------------- SRAM Address lines configuration -------------------------*/
+/*---------------- NOE and NWE configuration --------------------------------*/
+/*---------------- NE3 configuration ----------------------------------------*/
+/*---------------- NBL0, NBL1 configuration ---------------------------------*/
+
+ GPIOD->CRL = 0x44BB44BB;
+ GPIOD->CRH = 0xBBBBBBBB;
+
+ GPIOE->CRL = 0xB44444BB;
+ GPIOE->CRH = 0xBBBBBBBB;
+
+ GPIOF->CRL = 0x44BBBBBB;
+ GPIOF->CRH = 0xBBBB4444;
+
+ GPIOG->CRL = 0x44BBBBBB;
+ GPIOG->CRH = 0x44444B44;
+
+/*---------------- FSMC Configuration ---------------------------------------*/
+/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/
+
+ FSMC_Bank1->BTCR[4] = 0x00001011;
+ FSMC_Bank1->BTCR[5] = 0x00000200;
+}
+#endif /* DATA_IN_ExtSRAM */
+
+#ifdef SYSCLK_FREQ_HSE
+/**
+ * @brief Selects HSE as System clock source and configure HCLK, PCLK2
+ * and PCLK1 prescalers.
+ * @note This function should be used only after reset.
+ * @param None
+ * @retval None
+ */
+static void SetSysClockToHSE(void)
+{
+ __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+
+ /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
+ /* Enable HSE */
+ RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+
+ /* Wait till HSE is ready and if Time out is reached exit */
+ do
+ {
+ HSEStatus = RCC->CR & RCC_CR_HSERDY;
+ StartUpCounter++;
+ } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+ if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+ {
+ HSEStatus = (uint32_t)0x01;
+ }
+ else
+ {
+ HSEStatus = (uint32_t)0x00;
+ }
+
+ if (HSEStatus == (uint32_t)0x01)
+ {
+
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL
+ /* Enable Prefetch Buffer */
+ FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+ /* Flash 0 wait state */
+ FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+
+#ifndef STM32F10X_CL
+ FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
+#else
+ if (HSE_VALUE <= 24000000)
+ {
+ FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
+ }
+ else
+ {
+ FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
+ }
+#endif /* STM32F10X_CL */
+#endif
+
+ /* HCLK = SYSCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+
+ /* PCLK2 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+
+ /* PCLK1 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+
+ /* Select HSE as system clock source */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+ RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE;
+
+ /* Wait till HSE is used as system clock source */
+ while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04)
+ {
+ }
+ }
+ else
+ { /* If HSE fails to start-up, the application will have wrong clock
+ configuration. User can add here some code to deal with this error */
+ }
+}
+#elif defined SYSCLK_FREQ_24MHz
+/**
+ * @brief Sets System clock frequency to 24MHz and configure HCLK, PCLK2
+ * and PCLK1 prescalers.
+ * @note This function should be used only after reset.
+ * @param None
+ * @retval None
+ */
+static void SetSysClockTo24(void)
+{
+ __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+
+ /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
+ /* Enable HSE */
+ RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+
+ /* Wait till HSE is ready and if Time out is reached exit */
+ do
+ {
+ HSEStatus = RCC->CR & RCC_CR_HSERDY;
+ StartUpCounter++;
+ } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+ if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+ {
+ HSEStatus = (uint32_t)0x01;
+ }
+ else
+ {
+ HSEStatus = (uint32_t)0x00;
+ }
+
+ if (HSEStatus == (uint32_t)0x01)
+ {
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL
+ /* Enable Prefetch Buffer */
+ FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+ /* Flash 0 wait state */
+ FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+ FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
+#endif
+
+ /* HCLK = SYSCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+
+ /* PCLK2 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+
+ /* PCLK1 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+
+#ifdef STM32F10X_CL
+ /* Configure PLLs ------------------------------------------------------*/
+ /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */
+ RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 |
+ RCC_CFGR_PLLMULL6);
+
+ /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+ /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */
+ RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+ RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+ RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+ RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
+
+ /* Enable PLL2 */
+ RCC->CR |= RCC_CR_PLL2ON;
+ /* Wait till PLL2 is ready */
+ while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+ {
+ }
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+ /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6);
+#else
+ /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6);
+#endif /* STM32F10X_CL */
+
+ /* Enable PLL */
+ RCC->CR |= RCC_CR_PLLON;
+
+ /* Wait till PLL is ready */
+ while((RCC->CR & RCC_CR_PLLRDY) == 0)
+ {
+ }
+
+ /* Select PLL as system clock source */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+ RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;
+
+ /* Wait till PLL is used as system clock source */
+ while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+ {
+ }
+ }
+ else
+ { /* If HSE fails to start-up, the application will have wrong clock
+ configuration. User can add here some code to deal with this error */
+ }
+}
+#elif defined SYSCLK_FREQ_36MHz
+/**
+ * @brief Sets System clock frequency to 36MHz and configure HCLK, PCLK2
+ * and PCLK1 prescalers.
+ * @note This function should be used only after reset.
+ * @param None
+ * @retval None
+ */
+static void SetSysClockTo36(void)
+{
+ __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+
+ /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
+ /* Enable HSE */
+ RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+
+ /* Wait till HSE is ready and if Time out is reached exit */
+ do
+ {
+ HSEStatus = RCC->CR & RCC_CR_HSERDY;
+ StartUpCounter++;
+ } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+ if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+ {
+ HSEStatus = (uint32_t)0x01;
+ }
+ else
+ {
+ HSEStatus = (uint32_t)0x00;
+ }
+
+ if (HSEStatus == (uint32_t)0x01)
+ {
+ /* Enable Prefetch Buffer */
+ FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+ /* Flash 1 wait state */
+ FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+ FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
+
+ /* HCLK = SYSCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+
+ /* PCLK2 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+
+ /* PCLK1 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+
+#ifdef STM32F10X_CL
+ /* Configure PLLs ------------------------------------------------------*/
+
+ /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */
+ RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 |
+ RCC_CFGR_PLLMULL9);
+
+ /*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+ /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */
+
+ RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+ RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+ RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+ RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
+
+ /* Enable PLL2 */
+ RCC->CR |= RCC_CR_PLL2ON;
+ /* Wait till PLL2 is ready */
+ while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+ {
+ }
+
+#else
+ /* PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9);
+#endif /* STM32F10X_CL */
+
+ /* Enable PLL */
+ RCC->CR |= RCC_CR_PLLON;
+
+ /* Wait till PLL is ready */
+ while((RCC->CR & RCC_CR_PLLRDY) == 0)
+ {
+ }
+
+ /* Select PLL as system clock source */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+ RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;
+
+ /* Wait till PLL is used as system clock source */
+ while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+ {
+ }
+ }
+ else
+ { /* If HSE fails to start-up, the application will have wrong clock
+ configuration. User can add here some code to deal with this error */
+ }
+}
+#elif defined SYSCLK_FREQ_48MHz
+/**
+ * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2
+ * and PCLK1 prescalers.
+ * @note This function should be used only after reset.
+ * @param None
+ * @retval None
+ */
+static void SetSysClockTo48(void)
+{
+ __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+
+ /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
+ /* Enable HSE */
+ RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+
+ /* Wait till HSE is ready and if Time out is reached exit */
+ do
+ {
+ HSEStatus = RCC->CR & RCC_CR_HSERDY;
+ StartUpCounter++;
+ } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+ if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+ {
+ HSEStatus = (uint32_t)0x01;
+ }
+ else
+ {
+ HSEStatus = (uint32_t)0x00;
+ }
+
+ if (HSEStatus == (uint32_t)0x01)
+ {
+ /* Enable Prefetch Buffer */
+ FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+ /* Flash 1 wait state */
+ FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+ FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
+
+ /* HCLK = SYSCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+
+ /* PCLK2 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+
+ /* PCLK1 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+
+#ifdef STM32F10X_CL
+ /* Configure PLLs ------------------------------------------------------*/
+ /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+ /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+
+ RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+ RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+ RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+ RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+
+ /* Enable PLL2 */
+ RCC->CR |= RCC_CR_PLL2ON;
+ /* Wait till PLL2 is ready */
+ while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+ {
+ }
+
+
+ /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */
+ RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 |
+ RCC_CFGR_PLLMULL6);
+#else
+ /* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6);
+#endif /* STM32F10X_CL */
+
+ /* Enable PLL */
+ RCC->CR |= RCC_CR_PLLON;
+
+ /* Wait till PLL is ready */
+ while((RCC->CR & RCC_CR_PLLRDY) == 0)
+ {
+ }
+
+ /* Select PLL as system clock source */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+ RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;
+
+ /* Wait till PLL is used as system clock source */
+ while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+ {
+ }
+ }
+ else
+ { /* If HSE fails to start-up, the application will have wrong clock
+ configuration. User can add here some code to deal with this error */
+ }
+}
+
+#elif defined SYSCLK_FREQ_56MHz
+/**
+ * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2
+ * and PCLK1 prescalers.
+ * @note This function should be used only after reset.
+ * @param None
+ * @retval None
+ */
+static void SetSysClockTo56(void)
+{
+ __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+
+ /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
+ /* Enable HSE */
+ RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+
+ /* Wait till HSE is ready and if Time out is reached exit */
+ do
+ {
+ HSEStatus = RCC->CR & RCC_CR_HSERDY;
+ StartUpCounter++;
+ } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+ if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+ {
+ HSEStatus = (uint32_t)0x01;
+ }
+ else
+ {
+ HSEStatus = (uint32_t)0x00;
+ }
+
+ if (HSEStatus == (uint32_t)0x01)
+ {
+ /* Enable Prefetch Buffer */
+ FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+ /* Flash 2 wait state */
+ FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+ FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;
+
+ /* HCLK = SYSCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+
+ /* PCLK2 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+
+ /* PCLK1 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+
+#ifdef STM32F10X_CL
+ /* Configure PLLs ------------------------------------------------------*/
+ /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+ /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+
+ RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+ RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+ RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+ RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+
+ /* Enable PLL2 */
+ RCC->CR |= RCC_CR_PLL2ON;
+ /* Wait till PLL2 is ready */
+ while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+ {
+ }
+
+
+ /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */
+ RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 |
+ RCC_CFGR_PLLMULL7);
+#else
+ /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7);
+
+#endif /* STM32F10X_CL */
+
+ /* Enable PLL */
+ RCC->CR |= RCC_CR_PLLON;
+
+ /* Wait till PLL is ready */
+ while((RCC->CR & RCC_CR_PLLRDY) == 0)
+ {
+ }
+
+ /* Select PLL as system clock source */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+ RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;
+
+ /* Wait till PLL is used as system clock source */
+ while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+ {
+ }
+ }
+ else
+ { /* If HSE fails to start-up, the application will have wrong clock
+ configuration. User can add here some code to deal with this error */
+ }
+}
+
+#elif defined SYSCLK_FREQ_72MHz
+/**
+ * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2
+ * and PCLK1 prescalers.
+ * @note This function should be used only after reset.
+ * @param None
+ * @retval None
+ */
+static void SetSysClockTo72(void)
+{
+ __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+
+ /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
+ /* Enable HSE */
+ RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+
+ /* Wait till HSE is ready and if Time out is reached exit */
+ do
+ {
+ HSEStatus = RCC->CR & RCC_CR_HSERDY;
+ StartUpCounter++;
+ } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+ if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+ {
+ HSEStatus = (uint32_t)0x01;
+ }
+ else
+ {
+ HSEStatus = (uint32_t)0x00;
+ }
+
+ if (HSEStatus == (uint32_t)0x01)
+ {
+ /* Enable Prefetch Buffer */
+ FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+ /* Flash 2 wait state */
+ FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+ FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;
+
+
+ /* HCLK = SYSCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+
+ /* PCLK2 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+
+ /* PCLK1 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+
+#ifdef STM32F10X_CL
+ /* Configure PLLs ------------------------------------------------------*/
+ /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+ /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+
+ RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+ RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+ RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+ RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+
+ /* Enable PLL2 */
+ RCC->CR |= RCC_CR_PLL2ON;
+ /* Wait till PLL2 is ready */
+ while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+ {
+ }
+
+
+ /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */
+ RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 |
+ RCC_CFGR_PLLMULL9);
+#else
+ /* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE |
+ RCC_CFGR_PLLMULL));
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9);
+#endif /* STM32F10X_CL */
+
+ /* Enable PLL */
+ RCC->CR |= RCC_CR_PLLON;
+
+ /* Wait till PLL is ready */
+ while((RCC->CR & RCC_CR_PLLRDY) == 0)
+ {
+ }
+
+ /* Select PLL as system clock source */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+ RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;
+
+ /* Wait till PLL is used as system clock source */
+ while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+ {
+ }
+ }
+ else
+ { /* If HSE fails to start-up, the application will have wrong clock
+ configuration. User can add here some code to deal with this error */
+ }
+}
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/system_stm32f10x.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/system_stm32f10x.h
new file mode 100644
index 00000000..739f3328
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/lib/system_stm32f10x.h
@@ -0,0 +1,98 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f10x.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f10x_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F10X_H
+#define __SYSTEM_STM32F10X_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F10x_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F10x_System_Exported_types
+ * @{
+ */
+
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F10x_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F10x_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F10x_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F10X_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/main.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/main.c
new file mode 100644
index 00000000..d8bac96f
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/main.c
@@ -0,0 +1,198 @@
+/************************************************************************************//**
+* \file Demo\ARMCM3_STM32F1_Olimexino_STM32_TrueStudio\Boot\main.c
+* \brief Bootloader application source file.
+* \ingroup Boot_ARMCM3_STM32F1_Olimexino_STM32_TrueStudio
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+
+/****************************************************************************************
+* Include files
+****************************************************************************************/
+#include "boot.h" /* bootloader generic header */
+#include "stm32f10x.h" /* microcontroller registers */
+
+
+/****************************************************************************************
+* Plausibility check
+****************************************************************************************/
+#if (BOOT_COM_USB_ENABLE > 0) && (BOOT_COM_CAN_ENABLE > 0)
+#error "The STM32F103 does not support CAN and USB operation at the same time."
+#endif
+
+/****************************************************************************************
+* Function prototypes
+****************************************************************************************/
+static void Init(void);
+
+
+/************************************************************************************//**
+** \brief This is the entry point for the bootloader application and is called
+** by the reset interrupt vector after the C-startup routines executed.
+** \return Program return code.
+**
+****************************************************************************************/
+int main(void)
+{
+ /* initialize the microcontroller */
+ Init();
+ /* initialize the bootloader */
+ BootInit();
+
+ /* start the infinite program loop */
+ while (1)
+ {
+ /* run the bootloader task */
+ BootTask();
+ }
+
+ /* program should never get here */
+ return 0;
+} /*** end of main ***/
+
+
+/************************************************************************************//**
+** \brief Initializes the microcontroller.
+** \return none.
+**
+****************************************************************************************/
+static void Init(void)
+{
+ volatile blt_int32u StartUpCounter = 0, HSEStatus = 0;
+ blt_int32u pll_multiplier;
+ GPIO_InitTypeDef gpio_init;
+
+ /* reset the RCC clock configuration to the default reset state (for debug purpose) */
+ /* set HSION bit */
+ RCC->CR |= (blt_int32u)0x00000001;
+ /* reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
+ RCC->CFGR &= (blt_int32u)0xF8FF0000;
+ /* reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (blt_int32u)0xFEF6FFFF;
+ /* reset HSEBYP bit */
+ RCC->CR &= (blt_int32u)0xFFFBFFFF;
+ /* reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
+ RCC->CFGR &= (blt_int32u)0xFF80FFFF;
+ /* disable all interrupts and clear pending bits */
+ RCC->CIR = 0x009F0000;
+ /* enable HSE */
+ RCC->CR |= ((blt_int32u)RCC_CR_HSEON);
+ /* wait till HSE is ready and if Time out is reached exit */
+ do
+ {
+ HSEStatus = RCC->CR & RCC_CR_HSERDY;
+ StartUpCounter++;
+ }
+ while((HSEStatus == 0) && (StartUpCounter != 1500));
+ /* check if time out was reached */
+ if ((RCC->CR & RCC_CR_HSERDY) == RESET)
+ {
+ /* cannot continue when HSE is not ready */
+ ASSERT_RT(BLT_FALSE);
+ }
+ /* enable flash prefetch buffer */
+ FLASH->ACR |= FLASH_ACR_PRFTBE;
+ /* reset flash wait state configuration to default 0 wait states */
+ FLASH->ACR &= (blt_int32u)((blt_int32u)~FLASH_ACR_LATENCY);
+#if (BOOT_CPU_SYSTEM_SPEED_KHZ > 48000)
+ /* configure 2 flash wait states */
+ FLASH->ACR |= (blt_int32u)FLASH_ACR_LATENCY_2;
+#elif (BOOT_CPU_SYSTEM_SPEED_KHZ > 24000)
+ /* configure 1 flash wait states */
+ FLASH->ACR |= (blt_int32u)FLASH_ACR_LATENCY_1;
+#endif
+ /* HCLK = SYSCLK */
+ RCC->CFGR |= (blt_int32u)RCC_CFGR_HPRE_DIV1;
+ /* PCLK2 = HCLK/2 */
+ RCC->CFGR |= (blt_int32u)RCC_CFGR_PPRE2_DIV2;
+ /* PCLK1 = HCLK/2 */
+ RCC->CFGR |= (blt_int32u)RCC_CFGR_PPRE1_DIV2;
+ /* reset PLL configuration */
+ RCC->CFGR &= (blt_int32u)((blt_int32u)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | \
+ RCC_CFGR_PLLMULL));
+ /* assert that the pll_multiplier is between 2 and 16 */
+ ASSERT_CT((BOOT_CPU_SYSTEM_SPEED_KHZ/BOOT_CPU_XTAL_SPEED_KHZ) >= 2);
+ ASSERT_CT((BOOT_CPU_SYSTEM_SPEED_KHZ/BOOT_CPU_XTAL_SPEED_KHZ) <= 16);
+ /* calculate multiplier value */
+ pll_multiplier = BOOT_CPU_SYSTEM_SPEED_KHZ/BOOT_CPU_XTAL_SPEED_KHZ;
+ /* convert to register value */
+ pll_multiplier = (blt_int32u)((pll_multiplier - 2) << 18);
+ /* set the PLL multiplier and clock source */
+ RCC->CFGR |= (blt_int32u)(RCC_CFGR_PLLSRC_HSE | pll_multiplier);
+ /* enable PLL */
+ RCC->CR |= RCC_CR_PLLON;
+ /* wait till PLL is ready */
+ while((RCC->CR & RCC_CR_PLLRDY) == 0)
+ {
+ }
+ /* select PLL as system clock source */
+ RCC->CFGR &= (blt_int32u)((blt_int32u)~(RCC_CFGR_SW));
+ RCC->CFGR |= (blt_int32u)RCC_CFGR_SW_PLL;
+ /* wait till PLL is used as system clock source */
+ while ((RCC->CFGR & (blt_int32u)RCC_CFGR_SWS) != (blt_int32u)0x08)
+ {
+ }
+#if (BOOT_COM_CAN_ENABLE > 0)
+ /* enable clocks for CAN transmitter and receiver pins (GPIOB and AFIO) */
+ RCC->APB2ENR |= (blt_int32u)(0x00000008 | 0x00000001);
+ /* configure CAN Rx (GPIOB8) as alternate function input pull-up */
+ /* first reset the configuration */
+ GPIOB->CRH &= ~(blt_int32u)((blt_int32u)0xf << 0);
+ /* CNF8[1:0] = %10 and MODE8[1:0] = %00 */
+ GPIOB->CRH |= (blt_int32u)((blt_int32u)0x8 << 0);
+ /* configure CAN Tx (GPIOB9) as alternate function push-pull */
+ /* first reset the configuration */
+ GPIOB->CRH &= ~(blt_int32u)((blt_int32u)0xf << 4);
+ /* CNF9[1:0] = %10 and MODE9[1:0] = %11 */
+ GPIOB->CRH |= (blt_int32u)((blt_int32u)0xb << 4);
+ /* remap CAN1 pins to PortB */
+ AFIO->MAPR &= ~(blt_int32u)((blt_int32u)0x3 << 13);
+ AFIO->MAPR |= (blt_int32u)((blt_int32u)0x2 << 13);
+ /* enable clocks for CAN controller peripheral */
+ RCC->APB1ENR |= (blt_int32u)0x02000000;
+#endif
+#if (BOOT_COM_USB_ENABLE > 0)
+ /* divide USB clock by 1.5 to create 48MHz clock */
+ RCC->CFGR &= ~(blt_int32u)((blt_int32u)0x1 << 22);
+ /* enable the USB clock */
+ RCC->APB1ENR |= (blt_int32u)0x00800000;
+#endif
+ /* enable clocks for D2 input pin (GPIOA) */
+ RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
+ /* configure D2 and as digital input with internal pull-up */
+ gpio_init.GPIO_Speed = GPIO_Speed_50MHz;
+ gpio_init.GPIO_Mode = GPIO_Mode_IPU;
+ gpio_init.GPIO_Pin = GPIO_Pin_0;
+ GPIO_Init(GPIOA, &gpio_init);
+ /* enable clocks for LED1 output pin (GPIOA) */
+ RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
+ /* configure LED1 and as digital output */
+ gpio_init.GPIO_Speed = GPIO_Speed_50MHz;
+ gpio_init.GPIO_Mode = GPIO_Mode_Out_PP;
+ gpio_init.GPIO_Pin = GPIO_Pin_5;
+ GPIO_Init(GPIOA, &gpio_init);
+ GPIO_ResetBits(GPIOA, GPIO_Pin_5);
+} /*** end of Init ***/
+
+
+/*********************************** end of main.c *************************************/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/openblt_olimexino_stm32.elf.launch b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/openblt_olimexino_stm32.elf.launch
new file mode 100644
index 00000000..4a2a4534
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/openblt_olimexino_stm32.elf.launch
@@ -0,0 +1,40 @@
+
+© COPYRIGHT 2012 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF108F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr sp, =_estack /* Atollic update: set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMPER_IRQHandler
+ .word RTC_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_2_IRQHandler
+ .word USB_HP_CAN1_TX_IRQHandler
+ .word USB_LP_CAN1_RX0_IRQHandler
+ .word CAN1_RX1_IRQHandler
+ .word CAN1_SCE_IRQHandler
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_IRQHandler
+ .word TIM1_UP_IRQHandler
+ .word TIM1_TRG_COM_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word TIM4_IRQHandler
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word I2C2_EV_IRQHandler
+ .word I2C2_ER_IRQHandler
+ .word SPI1_IRQHandler
+ .word SPI2_IRQHandler
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word USART3_IRQHandler
+ .word EXTI15_10_IRQHandler
+ .word RTCAlarm_IRQHandler
+ .word USBWakeUp_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word BootRAM /* @0x108. This is for boot in RAM mode for
+ STM32F10x Medium Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMPER_IRQHandler
+ .thumb_set TAMPER_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_2_IRQHandler
+ .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+ .weak USB_HP_CAN1_TX_IRQHandler
+ .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+ .weak USB_LP_CAN1_RX0_IRQHandler
+ .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+ .weak CAN1_RX1_IRQHandler
+ .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+ .weak CAN1_SCE_IRQHandler
+ .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_IRQHandler
+ .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_IRQHandler
+ .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_IRQHandler
+ .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTCAlarm_IRQHandler
+ .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+ .weak USBWakeUp_IRQHandler
+ .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/stm32_flash.ld b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/stm32_flash.ld
new file mode 100644
index 00000000..fa1cf7b0
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/stm32_flash.ld
@@ -0,0 +1,178 @@
+/*
+******************************************************************************
+File: stm32_flash.ld
+Info: Generated by Atollic TrueSTUDIO(R) 9.0.1 2018-06-07
+
+Abstract: Linker script for STM32F103RB device
+ Set heap size, stack size, stack location, memory areas and
+ sections according to application requirements.
+
+The MIT License (MIT)
+Copyright (c) 2018 STMicroelectronics
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+
+******************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20005000; /* end of 20K RAM */
+
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x800; /* required amount of heap */
+_Min_Stack_Size = 0x800; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 24K
+ RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K
+ MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+ .ARM : {
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ } >FLASH
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >FLASH
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >FLASH
+ .fini_array :
+ {
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(4);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(4);
+ } >RAM
+
+ /* MEMORY_bank1 section, code must be located here explicitly */
+ /* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */
+ .memory_b1_text :
+ {
+ *(.mb1text) /* .mb1text sections (code) */
+ *(.mb1text*) /* .mb1text* sections (code) */
+ *(.mb1rodata) /* read-only data (constants) */
+ *(.mb1rodata*)
+ } >MEMORY_B1
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/usb_conf.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/usb_conf.h
new file mode 100644
index 00000000..3210da25
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/usb_conf.h
@@ -0,0 +1,76 @@
+/************************************************************************************//**
+* \file Demo\ARMCM3_STM32F1_Olimexino_STM32_TrueStudio\Boot\usb_conf.h
+* \brief Bootloader USB device configuration header file.
+* \ingroup Boot_ARMCM3_STM32F1_Olimexino_STM32_TrueStudio
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License along with OpenBLT.
+* If not, see © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MISC_H
+#define __MISC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup MISC
+ * @{
+ */
+
+/** @defgroup MISC_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief NVIC Init Structure definition
+ */
+
+typedef struct
+{
+ uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled.
+ This parameter can be a value of @ref IRQn_Type
+ (For the complete STM32 Devices IRQ Channels list, please
+ refer to stm32f10x.h file) */
+
+ uint8_t NVIC_IRQChannelPreemptionPriority; /*!< Specifies the pre-emption priority for the IRQ channel
+ specified in NVIC_IRQChannel. This parameter can be a value
+ between 0 and 15 as described in the table @ref NVIC_Priority_Table */
+
+ uint8_t NVIC_IRQChannelSubPriority; /*!< Specifies the subpriority level for the IRQ channel specified
+ in NVIC_IRQChannel. This parameter can be a value
+ between 0 and 15 as described in the table @ref NVIC_Priority_Table */
+
+ FunctionalState NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel
+ will be enabled or disabled.
+ This parameter can be set either to ENABLE or DISABLE */
+} NVIC_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup NVIC_Priority_Table
+ * @{
+ */
+
+/**
+@code
+ The table below gives the allowed values of the pre-emption priority and subpriority according
+ to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function
+ ============================================================================================================================
+ NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description
+ ============================================================================================================================
+ NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority
+ | | | 4 bits for subpriority
+ ----------------------------------------------------------------------------------------------------------------------------
+ NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority
+ | | | 3 bits for subpriority
+ ----------------------------------------------------------------------------------------------------------------------------
+ NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority
+ | | | 2 bits for subpriority
+ ----------------------------------------------------------------------------------------------------------------------------
+ NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority
+ | | | 1 bits for subpriority
+ ----------------------------------------------------------------------------------------------------------------------------
+ NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority
+ | | | 0 bits for subpriority
+ ============================================================================================================================
+@endcode
+*/
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup Vector_Table_Base
+ * @{
+ */
+
+#define NVIC_VectTab_RAM ((uint32_t)0x20000000)
+#define NVIC_VectTab_FLASH ((uint32_t)0x08000000)
+#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \
+ ((VECTTAB) == NVIC_VectTab_FLASH))
+/**
+ * @}
+ */
+
+/** @defgroup System_Low_Power
+ * @{
+ */
+
+#define NVIC_LP_SEVONPEND ((uint8_t)0x10)
+#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04)
+#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02)
+#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \
+ ((LP) == NVIC_LP_SLEEPDEEP) || \
+ ((LP) == NVIC_LP_SLEEPONEXIT))
+/**
+ * @}
+ */
+
+/** @defgroup Preemption_Priority_Group
+ * @{
+ */
+
+#define NVIC_PriorityGroup_0 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority
+ 4 bits for subpriority */
+#define NVIC_PriorityGroup_1 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority
+ 3 bits for subpriority */
+#define NVIC_PriorityGroup_2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority
+ 2 bits for subpriority */
+#define NVIC_PriorityGroup_3 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority
+ 1 bits for subpriority */
+#define NVIC_PriorityGroup_4 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority
+ 0 bits for subpriority */
+
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \
+ ((GROUP) == NVIC_PriorityGroup_1) || \
+ ((GROUP) == NVIC_PriorityGroup_2) || \
+ ((GROUP) == NVIC_PriorityGroup_3) || \
+ ((GROUP) == NVIC_PriorityGroup_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
+
+#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x000FFFFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup SysTick_clock_source
+ * @{
+ */
+
+#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB)
+#define SysTick_CLKSource_HCLK ((uint32_t)0x00000004)
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \
+ ((SOURCE) == SysTick_CLKSource_HCLK_Div8))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Exported_Functions
+ * @{
+ */
+
+void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup);
+void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct);
+void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset);
+void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState);
+void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MISC_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_adc.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_adc.h
new file mode 100644
index 00000000..d1b2653a
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_adc.h
@@ -0,0 +1,483 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_adc.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the ADC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_ADC_H
+#define __STM32F10x_ADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup ADC
+ * @{
+ */
+
+/** @defgroup ADC_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief ADC Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t ADC_Mode; /*!< Configures the ADC to operate in independent or
+ dual mode.
+ This parameter can be a value of @ref ADC_mode */
+
+ FunctionalState ADC_ScanConvMode; /*!< Specifies whether the conversion is performed in
+ Scan (multichannels) or Single (one channel) mode.
+ This parameter can be set to ENABLE or DISABLE */
+
+ FunctionalState ADC_ContinuousConvMode; /*!< Specifies whether the conversion is performed in
+ Continuous or Single mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t ADC_ExternalTrigConv; /*!< Defines the external trigger used to start the analog
+ to digital conversion of regular channels. This parameter
+ can be a value of @ref ADC_external_trigger_sources_for_regular_channels_conversion */
+
+ uint32_t ADC_DataAlign; /*!< Specifies whether the ADC data alignment is left or right.
+ This parameter can be a value of @ref ADC_data_align */
+
+ uint8_t ADC_NbrOfChannel; /*!< Specifies the number of ADC channels that will be converted
+ using the sequencer for regular channel group.
+ This parameter must range from 1 to 16. */
+}ADC_InitTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Exported_Constants
+ * @{
+ */
+
+#define IS_ADC_ALL_PERIPH(PERIPH) (((PERIPH) == ADC1) || \
+ ((PERIPH) == ADC2) || \
+ ((PERIPH) == ADC3))
+
+#define IS_ADC_DMA_PERIPH(PERIPH) (((PERIPH) == ADC1) || \
+ ((PERIPH) == ADC3))
+
+/** @defgroup ADC_mode
+ * @{
+ */
+
+#define ADC_Mode_Independent ((uint32_t)0x00000000)
+#define ADC_Mode_RegInjecSimult ((uint32_t)0x00010000)
+#define ADC_Mode_RegSimult_AlterTrig ((uint32_t)0x00020000)
+#define ADC_Mode_InjecSimult_FastInterl ((uint32_t)0x00030000)
+#define ADC_Mode_InjecSimult_SlowInterl ((uint32_t)0x00040000)
+#define ADC_Mode_InjecSimult ((uint32_t)0x00050000)
+#define ADC_Mode_RegSimult ((uint32_t)0x00060000)
+#define ADC_Mode_FastInterl ((uint32_t)0x00070000)
+#define ADC_Mode_SlowInterl ((uint32_t)0x00080000)
+#define ADC_Mode_AlterTrig ((uint32_t)0x00090000)
+
+#define IS_ADC_MODE(MODE) (((MODE) == ADC_Mode_Independent) || \
+ ((MODE) == ADC_Mode_RegInjecSimult) || \
+ ((MODE) == ADC_Mode_RegSimult_AlterTrig) || \
+ ((MODE) == ADC_Mode_InjecSimult_FastInterl) || \
+ ((MODE) == ADC_Mode_InjecSimult_SlowInterl) || \
+ ((MODE) == ADC_Mode_InjecSimult) || \
+ ((MODE) == ADC_Mode_RegSimult) || \
+ ((MODE) == ADC_Mode_FastInterl) || \
+ ((MODE) == ADC_Mode_SlowInterl) || \
+ ((MODE) == ADC_Mode_AlterTrig))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_external_trigger_sources_for_regular_channels_conversion
+ * @{
+ */
+
+#define ADC_ExternalTrigConv_T1_CC1 ((uint32_t)0x00000000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T1_CC2 ((uint32_t)0x00020000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T2_CC2 ((uint32_t)0x00060000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T3_TRGO ((uint32_t)0x00080000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T4_CC4 ((uint32_t)0x000A0000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO ((uint32_t)0x000C0000) /*!< For ADC1 and ADC2 */
+
+#define ADC_ExternalTrigConv_T1_CC3 ((uint32_t)0x00040000) /*!< For ADC1, ADC2 and ADC3 */
+#define ADC_ExternalTrigConv_None ((uint32_t)0x000E0000) /*!< For ADC1, ADC2 and ADC3 */
+
+#define ADC_ExternalTrigConv_T3_CC1 ((uint32_t)0x00000000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T2_CC3 ((uint32_t)0x00020000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T8_CC1 ((uint32_t)0x00060000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T8_TRGO ((uint32_t)0x00080000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T5_CC1 ((uint32_t)0x000A0000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T5_CC3 ((uint32_t)0x000C0000) /*!< For ADC3 only */
+
+#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_ExternalTrigConv_T1_CC1) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T1_CC2) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T1_CC3) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T2_CC2) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T3_TRGO) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T4_CC4) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_None) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T3_CC1) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T2_CC3) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T8_CC1) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T8_TRGO) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T5_CC1) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T5_CC3))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_data_align
+ * @{
+ */
+
+#define ADC_DataAlign_Right ((uint32_t)0x00000000)
+#define ADC_DataAlign_Left ((uint32_t)0x00000800)
+#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DataAlign_Right) || \
+ ((ALIGN) == ADC_DataAlign_Left))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_channels
+ * @{
+ */
+
+#define ADC_Channel_0 ((uint8_t)0x00)
+#define ADC_Channel_1 ((uint8_t)0x01)
+#define ADC_Channel_2 ((uint8_t)0x02)
+#define ADC_Channel_3 ((uint8_t)0x03)
+#define ADC_Channel_4 ((uint8_t)0x04)
+#define ADC_Channel_5 ((uint8_t)0x05)
+#define ADC_Channel_6 ((uint8_t)0x06)
+#define ADC_Channel_7 ((uint8_t)0x07)
+#define ADC_Channel_8 ((uint8_t)0x08)
+#define ADC_Channel_9 ((uint8_t)0x09)
+#define ADC_Channel_10 ((uint8_t)0x0A)
+#define ADC_Channel_11 ((uint8_t)0x0B)
+#define ADC_Channel_12 ((uint8_t)0x0C)
+#define ADC_Channel_13 ((uint8_t)0x0D)
+#define ADC_Channel_14 ((uint8_t)0x0E)
+#define ADC_Channel_15 ((uint8_t)0x0F)
+#define ADC_Channel_16 ((uint8_t)0x10)
+#define ADC_Channel_17 ((uint8_t)0x11)
+
+#define ADC_Channel_TempSensor ((uint8_t)ADC_Channel_16)
+#define ADC_Channel_Vrefint ((uint8_t)ADC_Channel_17)
+
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_Channel_0) || ((CHANNEL) == ADC_Channel_1) || \
+ ((CHANNEL) == ADC_Channel_2) || ((CHANNEL) == ADC_Channel_3) || \
+ ((CHANNEL) == ADC_Channel_4) || ((CHANNEL) == ADC_Channel_5) || \
+ ((CHANNEL) == ADC_Channel_6) || ((CHANNEL) == ADC_Channel_7) || \
+ ((CHANNEL) == ADC_Channel_8) || ((CHANNEL) == ADC_Channel_9) || \
+ ((CHANNEL) == ADC_Channel_10) || ((CHANNEL) == ADC_Channel_11) || \
+ ((CHANNEL) == ADC_Channel_12) || ((CHANNEL) == ADC_Channel_13) || \
+ ((CHANNEL) == ADC_Channel_14) || ((CHANNEL) == ADC_Channel_15) || \
+ ((CHANNEL) == ADC_Channel_16) || ((CHANNEL) == ADC_Channel_17))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_sampling_time
+ * @{
+ */
+
+#define ADC_SampleTime_1Cycles5 ((uint8_t)0x00)
+#define ADC_SampleTime_7Cycles5 ((uint8_t)0x01)
+#define ADC_SampleTime_13Cycles5 ((uint8_t)0x02)
+#define ADC_SampleTime_28Cycles5 ((uint8_t)0x03)
+#define ADC_SampleTime_41Cycles5 ((uint8_t)0x04)
+#define ADC_SampleTime_55Cycles5 ((uint8_t)0x05)
+#define ADC_SampleTime_71Cycles5 ((uint8_t)0x06)
+#define ADC_SampleTime_239Cycles5 ((uint8_t)0x07)
+#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SampleTime_1Cycles5) || \
+ ((TIME) == ADC_SampleTime_7Cycles5) || \
+ ((TIME) == ADC_SampleTime_13Cycles5) || \
+ ((TIME) == ADC_SampleTime_28Cycles5) || \
+ ((TIME) == ADC_SampleTime_41Cycles5) || \
+ ((TIME) == ADC_SampleTime_55Cycles5) || \
+ ((TIME) == ADC_SampleTime_71Cycles5) || \
+ ((TIME) == ADC_SampleTime_239Cycles5))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_external_trigger_sources_for_injected_channels_conversion
+ * @{
+ */
+
+#define ADC_ExternalTrigInjecConv_T2_TRGO ((uint32_t)0x00002000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_T2_CC1 ((uint32_t)0x00003000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_T3_CC4 ((uint32_t)0x00004000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_T4_TRGO ((uint32_t)0x00005000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4 ((uint32_t)0x00006000) /*!< For ADC1 and ADC2 */
+
+#define ADC_ExternalTrigInjecConv_T1_TRGO ((uint32_t)0x00000000) /*!< For ADC1, ADC2 and ADC3 */
+#define ADC_ExternalTrigInjecConv_T1_CC4 ((uint32_t)0x00001000) /*!< For ADC1, ADC2 and ADC3 */
+#define ADC_ExternalTrigInjecConv_None ((uint32_t)0x00007000) /*!< For ADC1, ADC2 and ADC3 */
+
+#define ADC_ExternalTrigInjecConv_T4_CC3 ((uint32_t)0x00002000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T8_CC2 ((uint32_t)0x00003000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T8_CC4 ((uint32_t)0x00004000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T5_TRGO ((uint32_t)0x00005000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T5_CC4 ((uint32_t)0x00006000) /*!< For ADC3 only */
+
+#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_ExternalTrigInjecConv_T1_TRGO) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T1_CC4) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_TRGO) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_CC1) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC4) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_TRGO) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_None) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC3) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC2) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC4) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_TRGO) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_CC4))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_injected_channel_selection
+ * @{
+ */
+
+#define ADC_InjectedChannel_1 ((uint8_t)0x14)
+#define ADC_InjectedChannel_2 ((uint8_t)0x18)
+#define ADC_InjectedChannel_3 ((uint8_t)0x1C)
+#define ADC_InjectedChannel_4 ((uint8_t)0x20)
+#define IS_ADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) == ADC_InjectedChannel_1) || \
+ ((CHANNEL) == ADC_InjectedChannel_2) || \
+ ((CHANNEL) == ADC_InjectedChannel_3) || \
+ ((CHANNEL) == ADC_InjectedChannel_4))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_analog_watchdog_selection
+ * @{
+ */
+
+#define ADC_AnalogWatchdog_SingleRegEnable ((uint32_t)0x00800200)
+#define ADC_AnalogWatchdog_SingleInjecEnable ((uint32_t)0x00400200)
+#define ADC_AnalogWatchdog_SingleRegOrInjecEnable ((uint32_t)0x00C00200)
+#define ADC_AnalogWatchdog_AllRegEnable ((uint32_t)0x00800000)
+#define ADC_AnalogWatchdog_AllInjecEnable ((uint32_t)0x00400000)
+#define ADC_AnalogWatchdog_AllRegAllInjecEnable ((uint32_t)0x00C00000)
+#define ADC_AnalogWatchdog_None ((uint32_t)0x00000000)
+
+#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_AnalogWatchdog_SingleRegEnable) || \
+ ((WATCHDOG) == ADC_AnalogWatchdog_SingleInjecEnable) || \
+ ((WATCHDOG) == ADC_AnalogWatchdog_SingleRegOrInjecEnable) || \
+ ((WATCHDOG) == ADC_AnalogWatchdog_AllRegEnable) || \
+ ((WATCHDOG) == ADC_AnalogWatchdog_AllInjecEnable) || \
+ ((WATCHDOG) == ADC_AnalogWatchdog_AllRegAllInjecEnable) || \
+ ((WATCHDOG) == ADC_AnalogWatchdog_None))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_interrupts_definition
+ * @{
+ */
+
+#define ADC_IT_EOC ((uint16_t)0x0220)
+#define ADC_IT_AWD ((uint16_t)0x0140)
+#define ADC_IT_JEOC ((uint16_t)0x0480)
+
+#define IS_ADC_IT(IT) ((((IT) & (uint16_t)0xF81F) == 0x00) && ((IT) != 0x00))
+
+#define IS_ADC_GET_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD) || \
+ ((IT) == ADC_IT_JEOC))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_flags_definition
+ * @{
+ */
+
+#define ADC_FLAG_AWD ((uint8_t)0x01)
+#define ADC_FLAG_EOC ((uint8_t)0x02)
+#define ADC_FLAG_JEOC ((uint8_t)0x04)
+#define ADC_FLAG_JSTRT ((uint8_t)0x08)
+#define ADC_FLAG_STRT ((uint8_t)0x10)
+#define IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint8_t)0xE0) == 0x00) && ((FLAG) != 0x00))
+#define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || ((FLAG) == ADC_FLAG_EOC) || \
+ ((FLAG) == ADC_FLAG_JEOC) || ((FLAG)== ADC_FLAG_JSTRT) || \
+ ((FLAG) == ADC_FLAG_STRT))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_thresholds
+ * @{
+ */
+
+#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_injected_offset
+ * @{
+ */
+
+#define IS_ADC_OFFSET(OFFSET) ((OFFSET) <= 0xFFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_injected_length
+ * @{
+ */
+
+#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x4))
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_injected_rank
+ * @{
+ */
+
+#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x4))
+
+/**
+ * @}
+ */
+
+
+/** @defgroup ADC_regular_length
+ * @{
+ */
+
+#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x10))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_rank
+ * @{
+ */
+
+#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x10))
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_discontinuous_mode_number
+ * @{
+ */
+
+#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 0x1) && ((NUMBER) <= 0x8))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Exported_Functions
+ * @{
+ */
+
+void ADC_DeInit(ADC_TypeDef* ADCx);
+void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct);
+void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct);
+void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState);
+void ADC_ResetCalibration(ADC_TypeDef* ADCx);
+FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx);
+void ADC_StartCalibration(ADC_TypeDef* ADCx);
+FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx);
+void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx);
+void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number);
+void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime);
+void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx);
+uint32_t ADC_GetDualModeConversionValue(void);
+void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv);
+void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx);
+void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime);
+void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length);
+void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset);
+uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel);
+void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog);
+void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold, uint16_t LowThreshold);
+void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel);
+void ADC_TempSensorVrefintCmd(FunctionalState NewState);
+FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG);
+void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG);
+ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT);
+void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_ADC_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_bkp.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_bkp.h
new file mode 100644
index 00000000..b620753e
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_bkp.h
@@ -0,0 +1,195 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_bkp.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the BKP firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_BKP_H
+#define __STM32F10x_BKP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup BKP
+ * @{
+ */
+
+/** @defgroup BKP_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Exported_Constants
+ * @{
+ */
+
+/** @defgroup Tamper_Pin_active_level
+ * @{
+ */
+
+#define BKP_TamperPinLevel_High ((uint16_t)0x0000)
+#define BKP_TamperPinLevel_Low ((uint16_t)0x0001)
+#define IS_BKP_TAMPER_PIN_LEVEL(LEVEL) (((LEVEL) == BKP_TamperPinLevel_High) || \
+ ((LEVEL) == BKP_TamperPinLevel_Low))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_output_source_to_output_on_the_Tamper_pin
+ * @{
+ */
+
+#define BKP_RTCOutputSource_None ((uint16_t)0x0000)
+#define BKP_RTCOutputSource_CalibClock ((uint16_t)0x0080)
+#define BKP_RTCOutputSource_Alarm ((uint16_t)0x0100)
+#define BKP_RTCOutputSource_Second ((uint16_t)0x0300)
+#define IS_BKP_RTC_OUTPUT_SOURCE(SOURCE) (((SOURCE) == BKP_RTCOutputSource_None) || \
+ ((SOURCE) == BKP_RTCOutputSource_CalibClock) || \
+ ((SOURCE) == BKP_RTCOutputSource_Alarm) || \
+ ((SOURCE) == BKP_RTCOutputSource_Second))
+/**
+ * @}
+ */
+
+/** @defgroup Data_Backup_Register
+ * @{
+ */
+
+#define BKP_DR1 ((uint16_t)0x0004)
+#define BKP_DR2 ((uint16_t)0x0008)
+#define BKP_DR3 ((uint16_t)0x000C)
+#define BKP_DR4 ((uint16_t)0x0010)
+#define BKP_DR5 ((uint16_t)0x0014)
+#define BKP_DR6 ((uint16_t)0x0018)
+#define BKP_DR7 ((uint16_t)0x001C)
+#define BKP_DR8 ((uint16_t)0x0020)
+#define BKP_DR9 ((uint16_t)0x0024)
+#define BKP_DR10 ((uint16_t)0x0028)
+#define BKP_DR11 ((uint16_t)0x0040)
+#define BKP_DR12 ((uint16_t)0x0044)
+#define BKP_DR13 ((uint16_t)0x0048)
+#define BKP_DR14 ((uint16_t)0x004C)
+#define BKP_DR15 ((uint16_t)0x0050)
+#define BKP_DR16 ((uint16_t)0x0054)
+#define BKP_DR17 ((uint16_t)0x0058)
+#define BKP_DR18 ((uint16_t)0x005C)
+#define BKP_DR19 ((uint16_t)0x0060)
+#define BKP_DR20 ((uint16_t)0x0064)
+#define BKP_DR21 ((uint16_t)0x0068)
+#define BKP_DR22 ((uint16_t)0x006C)
+#define BKP_DR23 ((uint16_t)0x0070)
+#define BKP_DR24 ((uint16_t)0x0074)
+#define BKP_DR25 ((uint16_t)0x0078)
+#define BKP_DR26 ((uint16_t)0x007C)
+#define BKP_DR27 ((uint16_t)0x0080)
+#define BKP_DR28 ((uint16_t)0x0084)
+#define BKP_DR29 ((uint16_t)0x0088)
+#define BKP_DR30 ((uint16_t)0x008C)
+#define BKP_DR31 ((uint16_t)0x0090)
+#define BKP_DR32 ((uint16_t)0x0094)
+#define BKP_DR33 ((uint16_t)0x0098)
+#define BKP_DR34 ((uint16_t)0x009C)
+#define BKP_DR35 ((uint16_t)0x00A0)
+#define BKP_DR36 ((uint16_t)0x00A4)
+#define BKP_DR37 ((uint16_t)0x00A8)
+#define BKP_DR38 ((uint16_t)0x00AC)
+#define BKP_DR39 ((uint16_t)0x00B0)
+#define BKP_DR40 ((uint16_t)0x00B4)
+#define BKP_DR41 ((uint16_t)0x00B8)
+#define BKP_DR42 ((uint16_t)0x00BC)
+
+#define IS_BKP_DR(DR) (((DR) == BKP_DR1) || ((DR) == BKP_DR2) || ((DR) == BKP_DR3) || \
+ ((DR) == BKP_DR4) || ((DR) == BKP_DR5) || ((DR) == BKP_DR6) || \
+ ((DR) == BKP_DR7) || ((DR) == BKP_DR8) || ((DR) == BKP_DR9) || \
+ ((DR) == BKP_DR10) || ((DR) == BKP_DR11) || ((DR) == BKP_DR12) || \
+ ((DR) == BKP_DR13) || ((DR) == BKP_DR14) || ((DR) == BKP_DR15) || \
+ ((DR) == BKP_DR16) || ((DR) == BKP_DR17) || ((DR) == BKP_DR18) || \
+ ((DR) == BKP_DR19) || ((DR) == BKP_DR20) || ((DR) == BKP_DR21) || \
+ ((DR) == BKP_DR22) || ((DR) == BKP_DR23) || ((DR) == BKP_DR24) || \
+ ((DR) == BKP_DR25) || ((DR) == BKP_DR26) || ((DR) == BKP_DR27) || \
+ ((DR) == BKP_DR28) || ((DR) == BKP_DR29) || ((DR) == BKP_DR30) || \
+ ((DR) == BKP_DR31) || ((DR) == BKP_DR32) || ((DR) == BKP_DR33) || \
+ ((DR) == BKP_DR34) || ((DR) == BKP_DR35) || ((DR) == BKP_DR36) || \
+ ((DR) == BKP_DR37) || ((DR) == BKP_DR38) || ((DR) == BKP_DR39) || \
+ ((DR) == BKP_DR40) || ((DR) == BKP_DR41) || ((DR) == BKP_DR42))
+
+#define IS_BKP_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x7F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Exported_Functions
+ * @{
+ */
+
+void BKP_DeInit(void);
+void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel);
+void BKP_TamperPinCmd(FunctionalState NewState);
+void BKP_ITConfig(FunctionalState NewState);
+void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource);
+void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue);
+void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data);
+uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR);
+FlagStatus BKP_GetFlagStatus(void);
+void BKP_ClearFlag(void);
+ITStatus BKP_GetITStatus(void);
+void BKP_ClearITPendingBit(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_BKP_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_can.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_can.h
new file mode 100644
index 00000000..648f747c
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_can.h
@@ -0,0 +1,697 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_can.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the CAN firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CAN_H
+#define __STM32F10x_CAN_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup CAN
+ * @{
+ */
+
+/** @defgroup CAN_Exported_Types
+ * @{
+ */
+
+#define IS_CAN_ALL_PERIPH(PERIPH) (((PERIPH) == CAN1) || \
+ ((PERIPH) == CAN2))
+
+/**
+ * @brief CAN init structure definition
+ */
+
+typedef struct
+{
+ uint16_t CAN_Prescaler; /*!< Specifies the length of a time quantum.
+ It ranges from 1 to 1024. */
+
+ uint8_t CAN_Mode; /*!< Specifies the CAN operating mode.
+ This parameter can be a value of
+ @ref CAN_operating_mode */
+
+ uint8_t CAN_SJW; /*!< Specifies the maximum number of time quanta
+ the CAN hardware is allowed to lengthen or
+ shorten a bit to perform resynchronization.
+ This parameter can be a value of
+ @ref CAN_synchronisation_jump_width */
+
+ uint8_t CAN_BS1; /*!< Specifies the number of time quanta in Bit
+ Segment 1. This parameter can be a value of
+ @ref CAN_time_quantum_in_bit_segment_1 */
+
+ uint8_t CAN_BS2; /*!< Specifies the number of time quanta in Bit
+ Segment 2.
+ This parameter can be a value of
+ @ref CAN_time_quantum_in_bit_segment_2 */
+
+ FunctionalState CAN_TTCM; /*!< Enable or disable the time triggered
+ communication mode. This parameter can be set
+ either to ENABLE or DISABLE. */
+
+ FunctionalState CAN_ABOM; /*!< Enable or disable the automatic bus-off
+ management. This parameter can be set either
+ to ENABLE or DISABLE. */
+
+ FunctionalState CAN_AWUM; /*!< Enable or disable the automatic wake-up mode.
+ This parameter can be set either to ENABLE or
+ DISABLE. */
+
+ FunctionalState CAN_NART; /*!< Enable or disable the no-automatic
+ retransmission mode. This parameter can be
+ set either to ENABLE or DISABLE. */
+
+ FunctionalState CAN_RFLM; /*!< Enable or disable the Receive FIFO Locked mode.
+ This parameter can be set either to ENABLE
+ or DISABLE. */
+
+ FunctionalState CAN_TXFP; /*!< Enable or disable the transmit FIFO priority.
+ This parameter can be set either to ENABLE
+ or DISABLE. */
+} CAN_InitTypeDef;
+
+/**
+ * @brief CAN filter init structure definition
+ */
+
+typedef struct
+{
+ uint16_t CAN_FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
+ configuration, first one for a 16-bit configuration).
+ This parameter can be a value between 0x0000 and 0xFFFF */
+
+ uint16_t CAN_FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
+ configuration, second one for a 16-bit configuration).
+ This parameter can be a value between 0x0000 and 0xFFFF */
+
+ uint16_t CAN_FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
+ according to the mode (MSBs for a 32-bit configuration,
+ first one for a 16-bit configuration).
+ This parameter can be a value between 0x0000 and 0xFFFF */
+
+ uint16_t CAN_FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
+ according to the mode (LSBs for a 32-bit configuration,
+ second one for a 16-bit configuration).
+ This parameter can be a value between 0x0000 and 0xFFFF */
+
+ uint16_t CAN_FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
+ This parameter can be a value of @ref CAN_filter_FIFO */
+
+ uint8_t CAN_FilterNumber; /*!< Specifies the filter which will be initialized. It ranges from 0 to 13. */
+
+ uint8_t CAN_FilterMode; /*!< Specifies the filter mode to be initialized.
+ This parameter can be a value of @ref CAN_filter_mode */
+
+ uint8_t CAN_FilterScale; /*!< Specifies the filter scale.
+ This parameter can be a value of @ref CAN_filter_scale */
+
+ FunctionalState CAN_FilterActivation; /*!< Enable or disable the filter.
+ This parameter can be set either to ENABLE or DISABLE. */
+} CAN_FilterInitTypeDef;
+
+/**
+ * @brief CAN Tx message structure definition
+ */
+
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter can be a value between 0 to 0x7FF. */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter can be a value between 0 to 0x1FFFFFFF. */
+
+ uint8_t IDE; /*!< Specifies the type of identifier for the message that
+ will be transmitted. This parameter can be a value
+ of @ref CAN_identifier_type */
+
+ uint8_t RTR; /*!< Specifies the type of frame for the message that will
+ be transmitted. This parameter can be a value of
+ @ref CAN_remote_transmission_request */
+
+ uint8_t DLC; /*!< Specifies the length of the frame that will be
+ transmitted. This parameter can be a value between
+ 0 to 8 */
+
+ uint8_t Data[8]; /*!< Contains the data to be transmitted. It ranges from 0
+ to 0xFF. */
+} CanTxMsg;
+
+/**
+ * @brief CAN Rx message structure definition
+ */
+
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter can be a value between 0 to 0x7FF. */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter can be a value between 0 to 0x1FFFFFFF. */
+
+ uint8_t IDE; /*!< Specifies the type of identifier for the message that
+ will be received. This parameter can be a value of
+ @ref CAN_identifier_type */
+
+ uint8_t RTR; /*!< Specifies the type of frame for the received message.
+ This parameter can be a value of
+ @ref CAN_remote_transmission_request */
+
+ uint8_t DLC; /*!< Specifies the length of the frame that will be received.
+ This parameter can be a value between 0 to 8 */
+
+ uint8_t Data[8]; /*!< Contains the data to be received. It ranges from 0 to
+ 0xFF. */
+
+ uint8_t FMI; /*!< Specifies the index of the filter the message stored in
+ the mailbox passes through. This parameter can be a
+ value between 0 to 0xFF */
+} CanRxMsg;
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Exported_Constants
+ * @{
+ */
+
+/** @defgroup CAN_sleep_constants
+ * @{
+ */
+
+#define CAN_InitStatus_Failed ((uint8_t)0x00) /*!< CAN initialization failed */
+#define CAN_InitStatus_Success ((uint8_t)0x01) /*!< CAN initialization OK */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Mode
+ * @{
+ */
+
+#define CAN_Mode_Normal ((uint8_t)0x00) /*!< normal mode */
+#define CAN_Mode_LoopBack ((uint8_t)0x01) /*!< loopback mode */
+#define CAN_Mode_Silent ((uint8_t)0x02) /*!< silent mode */
+#define CAN_Mode_Silent_LoopBack ((uint8_t)0x03) /*!< loopback combined with silent mode */
+
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || \
+ ((MODE) == CAN_Mode_LoopBack)|| \
+ ((MODE) == CAN_Mode_Silent) || \
+ ((MODE) == CAN_Mode_Silent_LoopBack))
+/**
+ * @}
+ */
+
+
+/**
+ * @defgroup CAN_Operating_Mode
+ * @{
+ */
+#define CAN_OperatingMode_Initialization ((uint8_t)0x00) /*!< Initialization mode */
+#define CAN_OperatingMode_Normal ((uint8_t)0x01) /*!< Normal mode */
+#define CAN_OperatingMode_Sleep ((uint8_t)0x02) /*!< sleep mode */
+
+
+#define IS_CAN_OPERATING_MODE(MODE) (((MODE) == CAN_OperatingMode_Initialization) ||\
+ ((MODE) == CAN_OperatingMode_Normal)|| \
+ ((MODE) == CAN_OperatingMode_Sleep))
+/**
+ * @}
+ */
+
+/**
+ * @defgroup CAN_Mode_Status
+ * @{
+ */
+
+#define CAN_ModeStatus_Failed ((uint8_t)0x00) /*!< CAN entering the specific mode failed */
+#define CAN_ModeStatus_Success ((uint8_t)!CAN_ModeStatus_Failed) /*!< CAN entering the specific mode Succeed */
+
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_synchronisation_jump_width
+ * @{
+ */
+
+#define CAN_SJW_1tq ((uint8_t)0x00) /*!< 1 time quantum */
+#define CAN_SJW_2tq ((uint8_t)0x01) /*!< 2 time quantum */
+#define CAN_SJW_3tq ((uint8_t)0x02) /*!< 3 time quantum */
+#define CAN_SJW_4tq ((uint8_t)0x03) /*!< 4 time quantum */
+
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \
+ ((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1
+ * @{
+ */
+
+#define CAN_BS1_1tq ((uint8_t)0x00) /*!< 1 time quantum */
+#define CAN_BS1_2tq ((uint8_t)0x01) /*!< 2 time quantum */
+#define CAN_BS1_3tq ((uint8_t)0x02) /*!< 3 time quantum */
+#define CAN_BS1_4tq ((uint8_t)0x03) /*!< 4 time quantum */
+#define CAN_BS1_5tq ((uint8_t)0x04) /*!< 5 time quantum */
+#define CAN_BS1_6tq ((uint8_t)0x05) /*!< 6 time quantum */
+#define CAN_BS1_7tq ((uint8_t)0x06) /*!< 7 time quantum */
+#define CAN_BS1_8tq ((uint8_t)0x07) /*!< 8 time quantum */
+#define CAN_BS1_9tq ((uint8_t)0x08) /*!< 9 time quantum */
+#define CAN_BS1_10tq ((uint8_t)0x09) /*!< 10 time quantum */
+#define CAN_BS1_11tq ((uint8_t)0x0A) /*!< 11 time quantum */
+#define CAN_BS1_12tq ((uint8_t)0x0B) /*!< 12 time quantum */
+#define CAN_BS1_13tq ((uint8_t)0x0C) /*!< 13 time quantum */
+#define CAN_BS1_14tq ((uint8_t)0x0D) /*!< 14 time quantum */
+#define CAN_BS1_15tq ((uint8_t)0x0E) /*!< 15 time quantum */
+#define CAN_BS1_16tq ((uint8_t)0x0F) /*!< 16 time quantum */
+
+#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2
+ * @{
+ */
+
+#define CAN_BS2_1tq ((uint8_t)0x00) /*!< 1 time quantum */
+#define CAN_BS2_2tq ((uint8_t)0x01) /*!< 2 time quantum */
+#define CAN_BS2_3tq ((uint8_t)0x02) /*!< 3 time quantum */
+#define CAN_BS2_4tq ((uint8_t)0x03) /*!< 4 time quantum */
+#define CAN_BS2_5tq ((uint8_t)0x04) /*!< 5 time quantum */
+#define CAN_BS2_6tq ((uint8_t)0x05) /*!< 6 time quantum */
+#define CAN_BS2_7tq ((uint8_t)0x06) /*!< 7 time quantum */
+#define CAN_BS2_8tq ((uint8_t)0x07) /*!< 8 time quantum */
+
+#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq)
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_clock_prescaler
+ * @{
+ */
+
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_number
+ * @{
+ */
+#ifndef STM32F10X_CL
+ #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13)
+#else
+ #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27)
+#endif /* STM32F10X_CL */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_mode
+ * @{
+ */
+
+#define CAN_FilterMode_IdMask ((uint8_t)0x00) /*!< identifier/mask mode */
+#define CAN_FilterMode_IdList ((uint8_t)0x01) /*!< identifier list mode */
+
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \
+ ((MODE) == CAN_FilterMode_IdList))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_scale
+ * @{
+ */
+
+#define CAN_FilterScale_16bit ((uint8_t)0x00) /*!< Two 16-bit filters */
+#define CAN_FilterScale_32bit ((uint8_t)0x01) /*!< One 32-bit filter */
+
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \
+ ((SCALE) == CAN_FilterScale_32bit))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_FIFO
+ * @{
+ */
+
+#define CAN_Filter_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_Filter_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \
+ ((FIFO) == CAN_FilterFIFO1))
+/**
+ * @}
+ */
+
+/** @defgroup Start_bank_filter_for_slave_CAN
+ * @{
+ */
+#define IS_CAN_BANKNUMBER(BANKNUMBER) (((BANKNUMBER) >= 1) && ((BANKNUMBER) <= 27))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Tx
+ * @{
+ */
+
+#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
+#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF))
+#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF))
+#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_identifier_type
+ * @{
+ */
+
+#define CAN_Id_Standard ((uint32_t)0x00000000) /*!< Standard Id */
+#define CAN_Id_Extended ((uint32_t)0x00000004) /*!< Extended Id */
+#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_Id_Standard) || \
+ ((IDTYPE) == CAN_Id_Extended))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_remote_transmission_request
+ * @{
+ */
+
+#define CAN_RTR_Data ((uint32_t)0x00000000) /*!< Data frame */
+#define CAN_RTR_Remote ((uint32_t)0x00000002) /*!< Remote frame */
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_Data) || ((RTR) == CAN_RTR_Remote))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_transmit_constants
+ * @{
+ */
+
+#define CAN_TxStatus_Failed ((uint8_t)0x00)/*!< CAN transmission failed */
+#define CAN_TxStatus_Ok ((uint8_t)0x01) /*!< CAN transmission succeeded */
+#define CAN_TxStatus_Pending ((uint8_t)0x02) /*!< CAN transmission pending */
+#define CAN_TxStatus_NoMailBox ((uint8_t)0x04) /*!< CAN cell did not provide an empty mailbox */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_receive_FIFO_number_constants
+ * @{
+ */
+
+#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */
+#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */
+
+#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_sleep_constants
+ * @{
+ */
+
+#define CAN_Sleep_Failed ((uint8_t)0x00) /*!< CAN did not enter the sleep mode */
+#define CAN_Sleep_Ok ((uint8_t)0x01) /*!< CAN entered the sleep mode */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_wake_up_constants
+ * @{
+ */
+
+#define CAN_WakeUp_Failed ((uint8_t)0x00) /*!< CAN did not leave the sleep mode */
+#define CAN_WakeUp_Ok ((uint8_t)0x01) /*!< CAN leaved the sleep mode */
+
+/**
+ * @}
+ */
+
+/**
+ * @defgroup CAN_Error_Code_constants
+ * @{
+ */
+
+#define CAN_ErrorCode_NoErr ((uint8_t)0x00) /*!< No Error */
+#define CAN_ErrorCode_StuffErr ((uint8_t)0x10) /*!< Stuff Error */
+#define CAN_ErrorCode_FormErr ((uint8_t)0x20) /*!< Form Error */
+#define CAN_ErrorCode_ACKErr ((uint8_t)0x30) /*!< Acknowledgment Error */
+#define CAN_ErrorCode_BitRecessiveErr ((uint8_t)0x40) /*!< Bit Recessive Error */
+#define CAN_ErrorCode_BitDominantErr ((uint8_t)0x50) /*!< Bit Dominant Error */
+#define CAN_ErrorCode_CRCErr ((uint8_t)0x60) /*!< CRC Error */
+#define CAN_ErrorCode_SoftwareSetErr ((uint8_t)0x70) /*!< Software Set Error */
+
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_flags
+ * @{
+ */
+/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
+ and CAN_ClearFlag() functions. */
+/* If the flag is 0x1XXXXXXX, it means that it can only be used with CAN_GetFlagStatus() function. */
+
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0 ((uint32_t)0x38000001) /*!< Request MailBox0 Flag */
+#define CAN_FLAG_RQCP1 ((uint32_t)0x38000100) /*!< Request MailBox1 Flag */
+#define CAN_FLAG_RQCP2 ((uint32_t)0x38010000) /*!< Request MailBox2 Flag */
+
+/* Receive Flags */
+#define CAN_FLAG_FMP0 ((uint32_t)0x12000003) /*!< FIFO 0 Message Pending Flag */
+#define CAN_FLAG_FF0 ((uint32_t)0x32000008) /*!< FIFO 0 Full Flag */
+#define CAN_FLAG_FOV0 ((uint32_t)0x32000010) /*!< FIFO 0 Overrun Flag */
+#define CAN_FLAG_FMP1 ((uint32_t)0x14000003) /*!< FIFO 1 Message Pending Flag */
+#define CAN_FLAG_FF1 ((uint32_t)0x34000008) /*!< FIFO 1 Full Flag */
+#define CAN_FLAG_FOV1 ((uint32_t)0x34000010) /*!< FIFO 1 Overrun Flag */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_WKU ((uint32_t)0x31000008) /*!< Wake up Flag */
+#define CAN_FLAG_SLAK ((uint32_t)0x31000012) /*!< Sleep acknowledge Flag */
+/* Note: When SLAK intterupt is disabled (SLKIE=0), no polling on SLAKI is possible.
+ In this case the SLAK bit can be polled.*/
+
+/* Error Flags */
+#define CAN_FLAG_EWG ((uint32_t)0x10F00001) /*!< Error Warning Flag */
+#define CAN_FLAG_EPV ((uint32_t)0x10F00002) /*!< Error Passive Flag */
+#define CAN_FLAG_BOF ((uint32_t)0x10F00004) /*!< Bus-Off Flag */
+#define CAN_FLAG_LEC ((uint32_t)0x30F00070) /*!< Last error code Flag */
+
+#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_BOF) || \
+ ((FLAG) == CAN_FLAG_EPV) || ((FLAG) == CAN_FLAG_EWG) || \
+ ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_FOV0) || \
+ ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FMP0) || \
+ ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1) || \
+ ((FLAG) == CAN_FLAG_FMP1) || ((FLAG) == CAN_FLAG_RQCP2) || \
+ ((FLAG) == CAN_FLAG_RQCP1)|| ((FLAG) == CAN_FLAG_RQCP0) || \
+ ((FLAG) == CAN_FLAG_SLAK ))
+
+#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_RQCP2) || \
+ ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0) || \
+ ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FOV0) ||\
+ ((FLAG) == CAN_FLAG_FF1) || ((FLAG) == CAN_FLAG_FOV1) || \
+ ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_SLAK))
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_interrupts
+ * @{
+ */
+
+
+
+#define CAN_IT_TME ((uint32_t)0x00000001) /*!< Transmit mailbox empty Interrupt*/
+
+/* Receive Interrupts */
+#define CAN_IT_FMP0 ((uint32_t)0x00000002) /*!< FIFO 0 message pending Interrupt*/
+#define CAN_IT_FF0 ((uint32_t)0x00000004) /*!< FIFO 0 full Interrupt*/
+#define CAN_IT_FOV0 ((uint32_t)0x00000008) /*!< FIFO 0 overrun Interrupt*/
+#define CAN_IT_FMP1 ((uint32_t)0x00000010) /*!< FIFO 1 message pending Interrupt*/
+#define CAN_IT_FF1 ((uint32_t)0x00000020) /*!< FIFO 1 full Interrupt*/
+#define CAN_IT_FOV1 ((uint32_t)0x00000040) /*!< FIFO 1 overrun Interrupt*/
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WKU ((uint32_t)0x00010000) /*!< Wake-up Interrupt*/
+#define CAN_IT_SLK ((uint32_t)0x00020000) /*!< Sleep acknowledge Interrupt*/
+
+/* Error Interrupts */
+#define CAN_IT_EWG ((uint32_t)0x00000100) /*!< Error warning Interrupt*/
+#define CAN_IT_EPV ((uint32_t)0x00000200) /*!< Error passive Interrupt*/
+#define CAN_IT_BOF ((uint32_t)0x00000400) /*!< Bus-off Interrupt*/
+#define CAN_IT_LEC ((uint32_t)0x00000800) /*!< Last error code Interrupt*/
+#define CAN_IT_ERR ((uint32_t)0x00008000) /*!< Error Interrupt*/
+
+/* Flags named as Interrupts : kept only for FW compatibility */
+#define CAN_IT_RQCP0 CAN_IT_TME
+#define CAN_IT_RQCP1 CAN_IT_TME
+#define CAN_IT_RQCP2 CAN_IT_TME
+
+
+#define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\
+ ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\
+ ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\
+ ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\
+ ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
+ ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
+ ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
+
+#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\
+ ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\
+ ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\
+ ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
+ ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
+ ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Legacy
+ * @{
+ */
+#define CANINITFAILED CAN_InitStatus_Failed
+#define CANINITOK CAN_InitStatus_Success
+#define CAN_FilterFIFO0 CAN_Filter_FIFO0
+#define CAN_FilterFIFO1 CAN_Filter_FIFO1
+#define CAN_ID_STD CAN_Id_Standard
+#define CAN_ID_EXT CAN_Id_Extended
+#define CAN_RTR_DATA CAN_RTR_Data
+#define CAN_RTR_REMOTE CAN_RTR_Remote
+#define CANTXFAILE CAN_TxStatus_Failed
+#define CANTXOK CAN_TxStatus_Ok
+#define CANTXPENDING CAN_TxStatus_Pending
+#define CAN_NO_MB CAN_TxStatus_NoMailBox
+#define CANSLEEPFAILED CAN_Sleep_Failed
+#define CANSLEEPOK CAN_Sleep_Ok
+#define CANWAKEUPFAILED CAN_WakeUp_Failed
+#define CANWAKEUPOK CAN_WakeUp_Ok
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Exported_Functions
+ * @{
+ */
+/* Function used to set the CAN configuration to the default reset state *****/
+void CAN_DeInit(CAN_TypeDef* CANx);
+
+/* Initialization and Configuration functions *********************************/
+uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct);
+void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct);
+void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct);
+void CAN_SlaveStartBank(uint8_t CAN_BankNumber);
+void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState);
+void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState);
+
+/* Transmit functions *********************************************************/
+uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage);
+uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox);
+void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox);
+
+/* Receive functions **********************************************************/
+void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage);
+void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber);
+uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber);
+
+
+/* Operation modes functions **************************************************/
+uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode);
+uint8_t CAN_Sleep(CAN_TypeDef* CANx);
+uint8_t CAN_WakeUp(CAN_TypeDef* CANx);
+
+/* Error management functions *************************************************/
+uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx);
+uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx);
+uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx);
+
+/* Interrupts and flags management functions **********************************/
+void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState);
+FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG);
+void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG);
+ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT);
+void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_CAN_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_cec.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_cec.h
new file mode 100644
index 00000000..a3f8fc78
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_cec.h
@@ -0,0 +1,210 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_cec.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the CEC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CEC_H
+#define __STM32F10x_CEC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup CEC
+ * @{
+ */
+
+
+/** @defgroup CEC_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief CEC Init structure definition
+ */
+typedef struct
+{
+ uint16_t CEC_BitTimingMode; /*!< Configures the CEC Bit Timing Error Mode.
+ This parameter can be a value of @ref CEC_BitTiming_Mode */
+ uint16_t CEC_BitPeriodMode; /*!< Configures the CEC Bit Period Error Mode.
+ This parameter can be a value of @ref CEC_BitPeriod_Mode */
+}CEC_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup CEC_BitTiming_Mode
+ * @{
+ */
+#define CEC_BitTimingStdMode ((uint16_t)0x00) /*!< Bit timing error Standard Mode */
+#define CEC_BitTimingErrFreeMode CEC_CFGR_BTEM /*!< Bit timing error Free Mode */
+
+#define IS_CEC_BIT_TIMING_ERROR_MODE(MODE) (((MODE) == CEC_BitTimingStdMode) || \
+ ((MODE) == CEC_BitTimingErrFreeMode))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BitPeriod_Mode
+ * @{
+ */
+#define CEC_BitPeriodStdMode ((uint16_t)0x00) /*!< Bit period error Standard Mode */
+#define CEC_BitPeriodFlexibleMode CEC_CFGR_BPEM /*!< Bit period error Flexible Mode */
+
+#define IS_CEC_BIT_PERIOD_ERROR_MODE(MODE) (((MODE) == CEC_BitPeriodStdMode) || \
+ ((MODE) == CEC_BitPeriodFlexibleMode))
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_interrupts_definition
+ * @{
+ */
+#define CEC_IT_TERR CEC_CSR_TERR
+#define CEC_IT_TBTRF CEC_CSR_TBTRF
+#define CEC_IT_RERR CEC_CSR_RERR
+#define CEC_IT_RBTF CEC_CSR_RBTF
+#define IS_CEC_GET_IT(IT) (((IT) == CEC_IT_TERR) || ((IT) == CEC_IT_TBTRF) || \
+ ((IT) == CEC_IT_RERR) || ((IT) == CEC_IT_RBTF))
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_Own_Address
+ * @{
+ */
+#define IS_CEC_ADDRESS(ADDRESS) ((ADDRESS) < 0x10)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Prescaler
+ * @{
+ */
+#define IS_CEC_PRESCALER(PRESCALER) ((PRESCALER) <= 0x3FFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup CEC_flags_definition
+ * @{
+ */
+
+/**
+ * @brief ESR register flags
+ */
+#define CEC_FLAG_BTE ((uint32_t)0x10010000)
+#define CEC_FLAG_BPE ((uint32_t)0x10020000)
+#define CEC_FLAG_RBTFE ((uint32_t)0x10040000)
+#define CEC_FLAG_SBE ((uint32_t)0x10080000)
+#define CEC_FLAG_ACKE ((uint32_t)0x10100000)
+#define CEC_FLAG_LINE ((uint32_t)0x10200000)
+#define CEC_FLAG_TBTFE ((uint32_t)0x10400000)
+
+/**
+ * @brief CSR register flags
+ */
+#define CEC_FLAG_TEOM ((uint32_t)0x00000002)
+#define CEC_FLAG_TERR ((uint32_t)0x00000004)
+#define CEC_FLAG_TBTRF ((uint32_t)0x00000008)
+#define CEC_FLAG_RSOM ((uint32_t)0x00000010)
+#define CEC_FLAG_REOM ((uint32_t)0x00000020)
+#define CEC_FLAG_RERR ((uint32_t)0x00000040)
+#define CEC_FLAG_RBTF ((uint32_t)0x00000080)
+
+#define IS_CEC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFF03) == 0x00) && ((FLAG) != 0x00))
+
+#define IS_CEC_GET_FLAG(FLAG) (((FLAG) == CEC_FLAG_BTE) || ((FLAG) == CEC_FLAG_BPE) || \
+ ((FLAG) == CEC_FLAG_RBTFE) || ((FLAG)== CEC_FLAG_SBE) || \
+ ((FLAG) == CEC_FLAG_ACKE) || ((FLAG) == CEC_FLAG_LINE) || \
+ ((FLAG) == CEC_FLAG_TBTFE) || ((FLAG) == CEC_FLAG_TEOM) || \
+ ((FLAG) == CEC_FLAG_TERR) || ((FLAG) == CEC_FLAG_TBTRF) || \
+ ((FLAG) == CEC_FLAG_RSOM) || ((FLAG) == CEC_FLAG_REOM) || \
+ ((FLAG) == CEC_FLAG_RERR) || ((FLAG) == CEC_FLAG_RBTF))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Exported_Functions
+ * @{
+ */
+void CEC_DeInit(void);
+void CEC_Init(CEC_InitTypeDef* CEC_InitStruct);
+void CEC_Cmd(FunctionalState NewState);
+void CEC_ITConfig(FunctionalState NewState);
+void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress);
+void CEC_SetPrescaler(uint16_t CEC_Prescaler);
+void CEC_SendDataByte(uint8_t Data);
+uint8_t CEC_ReceiveDataByte(void);
+void CEC_StartOfMessage(void);
+void CEC_EndOfMessageCmd(FunctionalState NewState);
+FlagStatus CEC_GetFlagStatus(uint32_t CEC_FLAG);
+void CEC_ClearFlag(uint32_t CEC_FLAG);
+ITStatus CEC_GetITStatus(uint8_t CEC_IT);
+void CEC_ClearITPendingBit(uint16_t CEC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_CEC_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_crc.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_crc.h
new file mode 100644
index 00000000..658a51ce
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_crc.h
@@ -0,0 +1,94 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_crc.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the CRC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CRC_H
+#define __STM32F10x_CRC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup CRC
+ * @{
+ */
+
+/** @defgroup CRC_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Exported_Functions
+ * @{
+ */
+
+void CRC_ResetDR(void);
+uint32_t CRC_CalcCRC(uint32_t Data);
+uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength);
+uint32_t CRC_GetCRC(void);
+void CRC_SetIDRegister(uint8_t IDValue);
+uint8_t CRC_GetIDRegister(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_CRC_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_dac.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_dac.h
new file mode 100644
index 00000000..71061641
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_dac.h
@@ -0,0 +1,317 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_dac.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the DAC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_DAC_H
+#define __STM32F10x_DAC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup DAC
+ * @{
+ */
+
+/** @defgroup DAC_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief DAC Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel.
+ This parameter can be a value of @ref DAC_trigger_selection */
+
+ uint32_t DAC_WaveGeneration; /*!< Specifies whether DAC channel noise waves or triangle waves
+ are generated, or whether no wave is generated.
+ This parameter can be a value of @ref DAC_wave_generation */
+
+ uint32_t DAC_LFSRUnmask_TriangleAmplitude; /*!< Specifies the LFSR mask for noise wave generation or
+ the maximum amplitude triangle generation for the DAC channel.
+ This parameter can be a value of @ref DAC_lfsrunmask_triangleamplitude */
+
+ uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
+ This parameter can be a value of @ref DAC_output_buffer */
+}DAC_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup DAC_trigger_selection
+ * @{
+ */
+
+#define DAC_Trigger_None ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_Trigger_T6_TRGO ((uint32_t)0x00000004) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T8_TRGO ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel
+ only in High-density devices*/
+#define DAC_Trigger_T3_TRGO ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel
+ only in Connectivity line, Medium-density and Low-density Value Line devices */
+#define DAC_Trigger_T7_TRGO ((uint32_t)0x00000014) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T5_TRGO ((uint32_t)0x0000001C) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T15_TRGO ((uint32_t)0x0000001C) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel
+ only in Medium-density and Low-density Value Line devices*/
+#define DAC_Trigger_T2_TRGO ((uint32_t)0x00000024) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T4_TRGO ((uint32_t)0x0000002C) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_Ext_IT9 ((uint32_t)0x00000034) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_Software ((uint32_t)0x0000003C) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_Trigger_None) || \
+ ((TRIGGER) == DAC_Trigger_T6_TRGO) || \
+ ((TRIGGER) == DAC_Trigger_T8_TRGO) || \
+ ((TRIGGER) == DAC_Trigger_T7_TRGO) || \
+ ((TRIGGER) == DAC_Trigger_T5_TRGO) || \
+ ((TRIGGER) == DAC_Trigger_T2_TRGO) || \
+ ((TRIGGER) == DAC_Trigger_T4_TRGO) || \
+ ((TRIGGER) == DAC_Trigger_Ext_IT9) || \
+ ((TRIGGER) == DAC_Trigger_Software))
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_wave_generation
+ * @{
+ */
+
+#define DAC_WaveGeneration_None ((uint32_t)0x00000000)
+#define DAC_WaveGeneration_Noise ((uint32_t)0x00000040)
+#define DAC_WaveGeneration_Triangle ((uint32_t)0x00000080)
+#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WaveGeneration_None) || \
+ ((WAVE) == DAC_WaveGeneration_Noise) || \
+ ((WAVE) == DAC_WaveGeneration_Triangle))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_lfsrunmask_triangleamplitude
+ * @{
+ */
+
+#define DAC_LFSRUnmask_Bit0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
+#define DAC_LFSRUnmask_Bits1_0 ((uint32_t)0x00000100) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits2_0 ((uint32_t)0x00000200) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits3_0 ((uint32_t)0x00000300) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits4_0 ((uint32_t)0x00000400) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits5_0 ((uint32_t)0x00000500) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits6_0 ((uint32_t)0x00000600) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits7_0 ((uint32_t)0x00000700) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits8_0 ((uint32_t)0x00000800) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits9_0 ((uint32_t)0x00000900) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits10_0 ((uint32_t)0x00000A00) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits11_0 ((uint32_t)0x00000B00) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
+#define DAC_TriangleAmplitude_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */
+#define DAC_TriangleAmplitude_3 ((uint32_t)0x00000100) /*!< Select max triangle amplitude of 3 */
+#define DAC_TriangleAmplitude_7 ((uint32_t)0x00000200) /*!< Select max triangle amplitude of 7 */
+#define DAC_TriangleAmplitude_15 ((uint32_t)0x00000300) /*!< Select max triangle amplitude of 15 */
+#define DAC_TriangleAmplitude_31 ((uint32_t)0x00000400) /*!< Select max triangle amplitude of 31 */
+#define DAC_TriangleAmplitude_63 ((uint32_t)0x00000500) /*!< Select max triangle amplitude of 63 */
+#define DAC_TriangleAmplitude_127 ((uint32_t)0x00000600) /*!< Select max triangle amplitude of 127 */
+#define DAC_TriangleAmplitude_255 ((uint32_t)0x00000700) /*!< Select max triangle amplitude of 255 */
+#define DAC_TriangleAmplitude_511 ((uint32_t)0x00000800) /*!< Select max triangle amplitude of 511 */
+#define DAC_TriangleAmplitude_1023 ((uint32_t)0x00000900) /*!< Select max triangle amplitude of 1023 */
+#define DAC_TriangleAmplitude_2047 ((uint32_t)0x00000A00) /*!< Select max triangle amplitude of 2047 */
+#define DAC_TriangleAmplitude_4095 ((uint32_t)0x00000B00) /*!< Select max triangle amplitude of 4095 */
+
+#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUnmask_Bit0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits1_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits2_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits3_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits4_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits5_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits6_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits7_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits8_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits9_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits10_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits11_0) || \
+ ((VALUE) == DAC_TriangleAmplitude_1) || \
+ ((VALUE) == DAC_TriangleAmplitude_3) || \
+ ((VALUE) == DAC_TriangleAmplitude_7) || \
+ ((VALUE) == DAC_TriangleAmplitude_15) || \
+ ((VALUE) == DAC_TriangleAmplitude_31) || \
+ ((VALUE) == DAC_TriangleAmplitude_63) || \
+ ((VALUE) == DAC_TriangleAmplitude_127) || \
+ ((VALUE) == DAC_TriangleAmplitude_255) || \
+ ((VALUE) == DAC_TriangleAmplitude_511) || \
+ ((VALUE) == DAC_TriangleAmplitude_1023) || \
+ ((VALUE) == DAC_TriangleAmplitude_2047) || \
+ ((VALUE) == DAC_TriangleAmplitude_4095))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_output_buffer
+ * @{
+ */
+
+#define DAC_OutputBuffer_Enable ((uint32_t)0x00000000)
+#define DAC_OutputBuffer_Disable ((uint32_t)0x00000002)
+#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OutputBuffer_Enable) || \
+ ((STATE) == DAC_OutputBuffer_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Channel_selection
+ * @{
+ */
+
+#define DAC_Channel_1 ((uint32_t)0x00000000)
+#define DAC_Channel_2 ((uint32_t)0x00000010)
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_Channel_1) || \
+ ((CHANNEL) == DAC_Channel_2))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data_alignment
+ * @{
+ */
+
+#define DAC_Align_12b_R ((uint32_t)0x00000000)
+#define DAC_Align_12b_L ((uint32_t)0x00000004)
+#define DAC_Align_8b_R ((uint32_t)0x00000008)
+#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_Align_12b_R) || \
+ ((ALIGN) == DAC_Align_12b_L) || \
+ ((ALIGN) == DAC_Align_8b_R))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_wave_generation
+ * @{
+ */
+
+#define DAC_Wave_Noise ((uint32_t)0x00000040)
+#define DAC_Wave_Triangle ((uint32_t)0x00000080)
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_Wave_Noise) || \
+ ((WAVE) == DAC_Wave_Triangle))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data
+ * @{
+ */
+
+#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0)
+/**
+ * @}
+ */
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/** @defgroup DAC_interrupts_definition
+ * @{
+ */
+
+#define DAC_IT_DMAUDR ((uint32_t)0x00002000)
+#define IS_DAC_IT(IT) (((IT) == DAC_IT_DMAUDR))
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_flags_definition
+ * @{
+ */
+
+#define DAC_FLAG_DMAUDR ((uint32_t)0x00002000)
+#define IS_DAC_FLAG(FLAG) (((FLAG) == DAC_FLAG_DMAUDR))
+
+/**
+ * @}
+ */
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Exported_Functions
+ * @{
+ */
+
+void DAC_DeInit(void);
+void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct);
+void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct);
+void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState);
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState);
+#endif
+void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState);
+void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState);
+void DAC_DualSoftwareTriggerCmd(FunctionalState NewState);
+void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState);
+void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data);
+void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data);
+void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1);
+uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel);
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG);
+void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG);
+ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT);
+void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_DAC_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_dbgmcu.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_dbgmcu.h
new file mode 100644
index 00000000..1e6a68ac
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_dbgmcu.h
@@ -0,0 +1,119 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_dbgmcu.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the DBGMCU
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_DBGMCU_H
+#define __STM32F10x_DBGMCU_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup DBGMCU
+ * @{
+ */
+
+/** @defgroup DBGMCU_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Exported_Constants
+ * @{
+ */
+
+#define DBGMCU_SLEEP ((uint32_t)0x00000001)
+#define DBGMCU_STOP ((uint32_t)0x00000002)
+#define DBGMCU_STANDBY ((uint32_t)0x00000004)
+#define DBGMCU_IWDG_STOP ((uint32_t)0x00000100)
+#define DBGMCU_WWDG_STOP ((uint32_t)0x00000200)
+#define DBGMCU_TIM1_STOP ((uint32_t)0x00000400)
+#define DBGMCU_TIM2_STOP ((uint32_t)0x00000800)
+#define DBGMCU_TIM3_STOP ((uint32_t)0x00001000)
+#define DBGMCU_TIM4_STOP ((uint32_t)0x00002000)
+#define DBGMCU_CAN1_STOP ((uint32_t)0x00004000)
+#define DBGMCU_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00008000)
+#define DBGMCU_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00010000)
+#define DBGMCU_TIM8_STOP ((uint32_t)0x00020000)
+#define DBGMCU_TIM5_STOP ((uint32_t)0x00040000)
+#define DBGMCU_TIM6_STOP ((uint32_t)0x00080000)
+#define DBGMCU_TIM7_STOP ((uint32_t)0x00100000)
+#define DBGMCU_CAN2_STOP ((uint32_t)0x00200000)
+#define DBGMCU_TIM15_STOP ((uint32_t)0x00400000)
+#define DBGMCU_TIM16_STOP ((uint32_t)0x00800000)
+#define DBGMCU_TIM17_STOP ((uint32_t)0x01000000)
+#define DBGMCU_TIM12_STOP ((uint32_t)0x02000000)
+#define DBGMCU_TIM13_STOP ((uint32_t)0x04000000)
+#define DBGMCU_TIM14_STOP ((uint32_t)0x08000000)
+#define DBGMCU_TIM9_STOP ((uint32_t)0x10000000)
+#define DBGMCU_TIM10_STOP ((uint32_t)0x20000000)
+#define DBGMCU_TIM11_STOP ((uint32_t)0x40000000)
+
+#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0x800000F8) == 0x00) && ((PERIPH) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Exported_Functions
+ * @{
+ */
+
+uint32_t DBGMCU_GetREVID(void);
+uint32_t DBGMCU_GetDEVID(void);
+void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_DBGMCU_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_dma.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_dma.h
new file mode 100644
index 00000000..b5dc6a80
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_dma.h
@@ -0,0 +1,439 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_dma.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the DMA firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_DMA_H
+#define __STM32F10x_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup DMA
+ * @{
+ */
+
+/** @defgroup DMA_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief DMA Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t DMA_PeripheralBaseAddr; /*!< Specifies the peripheral base address for DMAy Channelx. */
+
+ uint32_t DMA_MemoryBaseAddr; /*!< Specifies the memory base address for DMAy Channelx. */
+
+ uint32_t DMA_DIR; /*!< Specifies if the peripheral is the source or destination.
+ This parameter can be a value of @ref DMA_data_transfer_direction */
+
+ uint32_t DMA_BufferSize; /*!< Specifies the buffer size, in data unit, of the specified Channel.
+ The data unit is equal to the configuration set in DMA_PeripheralDataSize
+ or DMA_MemoryDataSize members depending in the transfer direction. */
+
+ uint32_t DMA_PeripheralInc; /*!< Specifies whether the Peripheral address register is incremented or not.
+ This parameter can be a value of @ref DMA_peripheral_incremented_mode */
+
+ uint32_t DMA_MemoryInc; /*!< Specifies whether the memory address register is incremented or not.
+ This parameter can be a value of @ref DMA_memory_incremented_mode */
+
+ uint32_t DMA_PeripheralDataSize; /*!< Specifies the Peripheral data width.
+ This parameter can be a value of @ref DMA_peripheral_data_size */
+
+ uint32_t DMA_MemoryDataSize; /*!< Specifies the Memory data width.
+ This parameter can be a value of @ref DMA_memory_data_size */
+
+ uint32_t DMA_Mode; /*!< Specifies the operation mode of the DMAy Channelx.
+ This parameter can be a value of @ref DMA_circular_normal_mode.
+ @note: The circular buffer mode cannot be used if the memory-to-memory
+ data transfer is configured on the selected Channel */
+
+ uint32_t DMA_Priority; /*!< Specifies the software priority for the DMAy Channelx.
+ This parameter can be a value of @ref DMA_priority_level */
+
+ uint32_t DMA_M2M; /*!< Specifies if the DMAy Channelx will be used in memory-to-memory transfer.
+ This parameter can be a value of @ref DMA_memory_to_memory */
+}DMA_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Constants
+ * @{
+ */
+
+#define IS_DMA_ALL_PERIPH(PERIPH) (((PERIPH) == DMA1_Channel1) || \
+ ((PERIPH) == DMA1_Channel2) || \
+ ((PERIPH) == DMA1_Channel3) || \
+ ((PERIPH) == DMA1_Channel4) || \
+ ((PERIPH) == DMA1_Channel5) || \
+ ((PERIPH) == DMA1_Channel6) || \
+ ((PERIPH) == DMA1_Channel7) || \
+ ((PERIPH) == DMA2_Channel1) || \
+ ((PERIPH) == DMA2_Channel2) || \
+ ((PERIPH) == DMA2_Channel3) || \
+ ((PERIPH) == DMA2_Channel4) || \
+ ((PERIPH) == DMA2_Channel5))
+
+/** @defgroup DMA_data_transfer_direction
+ * @{
+ */
+
+#define DMA_DIR_PeripheralDST ((uint32_t)0x00000010)
+#define DMA_DIR_PeripheralSRC ((uint32_t)0x00000000)
+#define IS_DMA_DIR(DIR) (((DIR) == DMA_DIR_PeripheralDST) || \
+ ((DIR) == DMA_DIR_PeripheralSRC))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_peripheral_incremented_mode
+ * @{
+ */
+
+#define DMA_PeripheralInc_Enable ((uint32_t)0x00000040)
+#define DMA_PeripheralInc_Disable ((uint32_t)0x00000000)
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PeripheralInc_Enable) || \
+ ((STATE) == DMA_PeripheralInc_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_memory_incremented_mode
+ * @{
+ */
+
+#define DMA_MemoryInc_Enable ((uint32_t)0x00000080)
+#define DMA_MemoryInc_Disable ((uint32_t)0x00000000)
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MemoryInc_Enable) || \
+ ((STATE) == DMA_MemoryInc_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_peripheral_data_size
+ * @{
+ */
+
+#define DMA_PeripheralDataSize_Byte ((uint32_t)0x00000000)
+#define DMA_PeripheralDataSize_HalfWord ((uint32_t)0x00000100)
+#define DMA_PeripheralDataSize_Word ((uint32_t)0x00000200)
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PeripheralDataSize_Byte) || \
+ ((SIZE) == DMA_PeripheralDataSize_HalfWord) || \
+ ((SIZE) == DMA_PeripheralDataSize_Word))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_memory_data_size
+ * @{
+ */
+
+#define DMA_MemoryDataSize_Byte ((uint32_t)0x00000000)
+#define DMA_MemoryDataSize_HalfWord ((uint32_t)0x00000400)
+#define DMA_MemoryDataSize_Word ((uint32_t)0x00000800)
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MemoryDataSize_Byte) || \
+ ((SIZE) == DMA_MemoryDataSize_HalfWord) || \
+ ((SIZE) == DMA_MemoryDataSize_Word))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_circular_normal_mode
+ * @{
+ */
+
+#define DMA_Mode_Circular ((uint32_t)0x00000020)
+#define DMA_Mode_Normal ((uint32_t)0x00000000)
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_Mode_Circular) || ((MODE) == DMA_Mode_Normal))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_priority_level
+ * @{
+ */
+
+#define DMA_Priority_VeryHigh ((uint32_t)0x00003000)
+#define DMA_Priority_High ((uint32_t)0x00002000)
+#define DMA_Priority_Medium ((uint32_t)0x00001000)
+#define DMA_Priority_Low ((uint32_t)0x00000000)
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_Priority_VeryHigh) || \
+ ((PRIORITY) == DMA_Priority_High) || \
+ ((PRIORITY) == DMA_Priority_Medium) || \
+ ((PRIORITY) == DMA_Priority_Low))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_memory_to_memory
+ * @{
+ */
+
+#define DMA_M2M_Enable ((uint32_t)0x00004000)
+#define DMA_M2M_Disable ((uint32_t)0x00000000)
+#define IS_DMA_M2M_STATE(STATE) (((STATE) == DMA_M2M_Enable) || ((STATE) == DMA_M2M_Disable))
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_interrupts_definition
+ * @{
+ */
+
+#define DMA_IT_TC ((uint32_t)0x00000002)
+#define DMA_IT_HT ((uint32_t)0x00000004)
+#define DMA_IT_TE ((uint32_t)0x00000008)
+#define IS_DMA_CONFIG_IT(IT) ((((IT) & 0xFFFFFFF1) == 0x00) && ((IT) != 0x00))
+
+#define DMA1_IT_GL1 ((uint32_t)0x00000001)
+#define DMA1_IT_TC1 ((uint32_t)0x00000002)
+#define DMA1_IT_HT1 ((uint32_t)0x00000004)
+#define DMA1_IT_TE1 ((uint32_t)0x00000008)
+#define DMA1_IT_GL2 ((uint32_t)0x00000010)
+#define DMA1_IT_TC2 ((uint32_t)0x00000020)
+#define DMA1_IT_HT2 ((uint32_t)0x00000040)
+#define DMA1_IT_TE2 ((uint32_t)0x00000080)
+#define DMA1_IT_GL3 ((uint32_t)0x00000100)
+#define DMA1_IT_TC3 ((uint32_t)0x00000200)
+#define DMA1_IT_HT3 ((uint32_t)0x00000400)
+#define DMA1_IT_TE3 ((uint32_t)0x00000800)
+#define DMA1_IT_GL4 ((uint32_t)0x00001000)
+#define DMA1_IT_TC4 ((uint32_t)0x00002000)
+#define DMA1_IT_HT4 ((uint32_t)0x00004000)
+#define DMA1_IT_TE4 ((uint32_t)0x00008000)
+#define DMA1_IT_GL5 ((uint32_t)0x00010000)
+#define DMA1_IT_TC5 ((uint32_t)0x00020000)
+#define DMA1_IT_HT5 ((uint32_t)0x00040000)
+#define DMA1_IT_TE5 ((uint32_t)0x00080000)
+#define DMA1_IT_GL6 ((uint32_t)0x00100000)
+#define DMA1_IT_TC6 ((uint32_t)0x00200000)
+#define DMA1_IT_HT6 ((uint32_t)0x00400000)
+#define DMA1_IT_TE6 ((uint32_t)0x00800000)
+#define DMA1_IT_GL7 ((uint32_t)0x01000000)
+#define DMA1_IT_TC7 ((uint32_t)0x02000000)
+#define DMA1_IT_HT7 ((uint32_t)0x04000000)
+#define DMA1_IT_TE7 ((uint32_t)0x08000000)
+
+#define DMA2_IT_GL1 ((uint32_t)0x10000001)
+#define DMA2_IT_TC1 ((uint32_t)0x10000002)
+#define DMA2_IT_HT1 ((uint32_t)0x10000004)
+#define DMA2_IT_TE1 ((uint32_t)0x10000008)
+#define DMA2_IT_GL2 ((uint32_t)0x10000010)
+#define DMA2_IT_TC2 ((uint32_t)0x10000020)
+#define DMA2_IT_HT2 ((uint32_t)0x10000040)
+#define DMA2_IT_TE2 ((uint32_t)0x10000080)
+#define DMA2_IT_GL3 ((uint32_t)0x10000100)
+#define DMA2_IT_TC3 ((uint32_t)0x10000200)
+#define DMA2_IT_HT3 ((uint32_t)0x10000400)
+#define DMA2_IT_TE3 ((uint32_t)0x10000800)
+#define DMA2_IT_GL4 ((uint32_t)0x10001000)
+#define DMA2_IT_TC4 ((uint32_t)0x10002000)
+#define DMA2_IT_HT4 ((uint32_t)0x10004000)
+#define DMA2_IT_TE4 ((uint32_t)0x10008000)
+#define DMA2_IT_GL5 ((uint32_t)0x10010000)
+#define DMA2_IT_TC5 ((uint32_t)0x10020000)
+#define DMA2_IT_HT5 ((uint32_t)0x10040000)
+#define DMA2_IT_TE5 ((uint32_t)0x10080000)
+
+#define IS_DMA_CLEAR_IT(IT) (((((IT) & 0xF0000000) == 0x00) || (((IT) & 0xEFF00000) == 0x00)) && ((IT) != 0x00))
+
+#define IS_DMA_GET_IT(IT) (((IT) == DMA1_IT_GL1) || ((IT) == DMA1_IT_TC1) || \
+ ((IT) == DMA1_IT_HT1) || ((IT) == DMA1_IT_TE1) || \
+ ((IT) == DMA1_IT_GL2) || ((IT) == DMA1_IT_TC2) || \
+ ((IT) == DMA1_IT_HT2) || ((IT) == DMA1_IT_TE2) || \
+ ((IT) == DMA1_IT_GL3) || ((IT) == DMA1_IT_TC3) || \
+ ((IT) == DMA1_IT_HT3) || ((IT) == DMA1_IT_TE3) || \
+ ((IT) == DMA1_IT_GL4) || ((IT) == DMA1_IT_TC4) || \
+ ((IT) == DMA1_IT_HT4) || ((IT) == DMA1_IT_TE4) || \
+ ((IT) == DMA1_IT_GL5) || ((IT) == DMA1_IT_TC5) || \
+ ((IT) == DMA1_IT_HT5) || ((IT) == DMA1_IT_TE5) || \
+ ((IT) == DMA1_IT_GL6) || ((IT) == DMA1_IT_TC6) || \
+ ((IT) == DMA1_IT_HT6) || ((IT) == DMA1_IT_TE6) || \
+ ((IT) == DMA1_IT_GL7) || ((IT) == DMA1_IT_TC7) || \
+ ((IT) == DMA1_IT_HT7) || ((IT) == DMA1_IT_TE7) || \
+ ((IT) == DMA2_IT_GL1) || ((IT) == DMA2_IT_TC1) || \
+ ((IT) == DMA2_IT_HT1) || ((IT) == DMA2_IT_TE1) || \
+ ((IT) == DMA2_IT_GL2) || ((IT) == DMA2_IT_TC2) || \
+ ((IT) == DMA2_IT_HT2) || ((IT) == DMA2_IT_TE2) || \
+ ((IT) == DMA2_IT_GL3) || ((IT) == DMA2_IT_TC3) || \
+ ((IT) == DMA2_IT_HT3) || ((IT) == DMA2_IT_TE3) || \
+ ((IT) == DMA2_IT_GL4) || ((IT) == DMA2_IT_TC4) || \
+ ((IT) == DMA2_IT_HT4) || ((IT) == DMA2_IT_TE4) || \
+ ((IT) == DMA2_IT_GL5) || ((IT) == DMA2_IT_TC5) || \
+ ((IT) == DMA2_IT_HT5) || ((IT) == DMA2_IT_TE5))
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_flags_definition
+ * @{
+ */
+#define DMA1_FLAG_GL1 ((uint32_t)0x00000001)
+#define DMA1_FLAG_TC1 ((uint32_t)0x00000002)
+#define DMA1_FLAG_HT1 ((uint32_t)0x00000004)
+#define DMA1_FLAG_TE1 ((uint32_t)0x00000008)
+#define DMA1_FLAG_GL2 ((uint32_t)0x00000010)
+#define DMA1_FLAG_TC2 ((uint32_t)0x00000020)
+#define DMA1_FLAG_HT2 ((uint32_t)0x00000040)
+#define DMA1_FLAG_TE2 ((uint32_t)0x00000080)
+#define DMA1_FLAG_GL3 ((uint32_t)0x00000100)
+#define DMA1_FLAG_TC3 ((uint32_t)0x00000200)
+#define DMA1_FLAG_HT3 ((uint32_t)0x00000400)
+#define DMA1_FLAG_TE3 ((uint32_t)0x00000800)
+#define DMA1_FLAG_GL4 ((uint32_t)0x00001000)
+#define DMA1_FLAG_TC4 ((uint32_t)0x00002000)
+#define DMA1_FLAG_HT4 ((uint32_t)0x00004000)
+#define DMA1_FLAG_TE4 ((uint32_t)0x00008000)
+#define DMA1_FLAG_GL5 ((uint32_t)0x00010000)
+#define DMA1_FLAG_TC5 ((uint32_t)0x00020000)
+#define DMA1_FLAG_HT5 ((uint32_t)0x00040000)
+#define DMA1_FLAG_TE5 ((uint32_t)0x00080000)
+#define DMA1_FLAG_GL6 ((uint32_t)0x00100000)
+#define DMA1_FLAG_TC6 ((uint32_t)0x00200000)
+#define DMA1_FLAG_HT6 ((uint32_t)0x00400000)
+#define DMA1_FLAG_TE6 ((uint32_t)0x00800000)
+#define DMA1_FLAG_GL7 ((uint32_t)0x01000000)
+#define DMA1_FLAG_TC7 ((uint32_t)0x02000000)
+#define DMA1_FLAG_HT7 ((uint32_t)0x04000000)
+#define DMA1_FLAG_TE7 ((uint32_t)0x08000000)
+
+#define DMA2_FLAG_GL1 ((uint32_t)0x10000001)
+#define DMA2_FLAG_TC1 ((uint32_t)0x10000002)
+#define DMA2_FLAG_HT1 ((uint32_t)0x10000004)
+#define DMA2_FLAG_TE1 ((uint32_t)0x10000008)
+#define DMA2_FLAG_GL2 ((uint32_t)0x10000010)
+#define DMA2_FLAG_TC2 ((uint32_t)0x10000020)
+#define DMA2_FLAG_HT2 ((uint32_t)0x10000040)
+#define DMA2_FLAG_TE2 ((uint32_t)0x10000080)
+#define DMA2_FLAG_GL3 ((uint32_t)0x10000100)
+#define DMA2_FLAG_TC3 ((uint32_t)0x10000200)
+#define DMA2_FLAG_HT3 ((uint32_t)0x10000400)
+#define DMA2_FLAG_TE3 ((uint32_t)0x10000800)
+#define DMA2_FLAG_GL4 ((uint32_t)0x10001000)
+#define DMA2_FLAG_TC4 ((uint32_t)0x10002000)
+#define DMA2_FLAG_HT4 ((uint32_t)0x10004000)
+#define DMA2_FLAG_TE4 ((uint32_t)0x10008000)
+#define DMA2_FLAG_GL5 ((uint32_t)0x10010000)
+#define DMA2_FLAG_TC5 ((uint32_t)0x10020000)
+#define DMA2_FLAG_HT5 ((uint32_t)0x10040000)
+#define DMA2_FLAG_TE5 ((uint32_t)0x10080000)
+
+#define IS_DMA_CLEAR_FLAG(FLAG) (((((FLAG) & 0xF0000000) == 0x00) || (((FLAG) & 0xEFF00000) == 0x00)) && ((FLAG) != 0x00))
+
+#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA1_FLAG_GL1) || ((FLAG) == DMA1_FLAG_TC1) || \
+ ((FLAG) == DMA1_FLAG_HT1) || ((FLAG) == DMA1_FLAG_TE1) || \
+ ((FLAG) == DMA1_FLAG_GL2) || ((FLAG) == DMA1_FLAG_TC2) || \
+ ((FLAG) == DMA1_FLAG_HT2) || ((FLAG) == DMA1_FLAG_TE2) || \
+ ((FLAG) == DMA1_FLAG_GL3) || ((FLAG) == DMA1_FLAG_TC3) || \
+ ((FLAG) == DMA1_FLAG_HT3) || ((FLAG) == DMA1_FLAG_TE3) || \
+ ((FLAG) == DMA1_FLAG_GL4) || ((FLAG) == DMA1_FLAG_TC4) || \
+ ((FLAG) == DMA1_FLAG_HT4) || ((FLAG) == DMA1_FLAG_TE4) || \
+ ((FLAG) == DMA1_FLAG_GL5) || ((FLAG) == DMA1_FLAG_TC5) || \
+ ((FLAG) == DMA1_FLAG_HT5) || ((FLAG) == DMA1_FLAG_TE5) || \
+ ((FLAG) == DMA1_FLAG_GL6) || ((FLAG) == DMA1_FLAG_TC6) || \
+ ((FLAG) == DMA1_FLAG_HT6) || ((FLAG) == DMA1_FLAG_TE6) || \
+ ((FLAG) == DMA1_FLAG_GL7) || ((FLAG) == DMA1_FLAG_TC7) || \
+ ((FLAG) == DMA1_FLAG_HT7) || ((FLAG) == DMA1_FLAG_TE7) || \
+ ((FLAG) == DMA2_FLAG_GL1) || ((FLAG) == DMA2_FLAG_TC1) || \
+ ((FLAG) == DMA2_FLAG_HT1) || ((FLAG) == DMA2_FLAG_TE1) || \
+ ((FLAG) == DMA2_FLAG_GL2) || ((FLAG) == DMA2_FLAG_TC2) || \
+ ((FLAG) == DMA2_FLAG_HT2) || ((FLAG) == DMA2_FLAG_TE2) || \
+ ((FLAG) == DMA2_FLAG_GL3) || ((FLAG) == DMA2_FLAG_TC3) || \
+ ((FLAG) == DMA2_FLAG_HT3) || ((FLAG) == DMA2_FLAG_TE3) || \
+ ((FLAG) == DMA2_FLAG_GL4) || ((FLAG) == DMA2_FLAG_TC4) || \
+ ((FLAG) == DMA2_FLAG_HT4) || ((FLAG) == DMA2_FLAG_TE4) || \
+ ((FLAG) == DMA2_FLAG_GL5) || ((FLAG) == DMA2_FLAG_TC5) || \
+ ((FLAG) == DMA2_FLAG_HT5) || ((FLAG) == DMA2_FLAG_TE5))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Buffer_Size
+ * @{
+ */
+
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Functions
+ * @{
+ */
+
+void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx);
+void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct);
+void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct);
+void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState);
+void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState);
+void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber);
+uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx);
+FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG);
+void DMA_ClearFlag(uint32_t DMAy_FLAG);
+ITStatus DMA_GetITStatus(uint32_t DMAy_IT);
+void DMA_ClearITPendingBit(uint32_t DMAy_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_DMA_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_exti.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_exti.h
new file mode 100644
index 00000000..a1ab7d03
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_exti.h
@@ -0,0 +1,184 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_exti.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the EXTI firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_EXTI_H
+#define __STM32F10x_EXTI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup EXTI
+ * @{
+ */
+
+/** @defgroup EXTI_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief EXTI mode enumeration
+ */
+
+typedef enum
+{
+ EXTI_Mode_Interrupt = 0x00,
+ EXTI_Mode_Event = 0x04
+}EXTIMode_TypeDef;
+
+#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event))
+
+/**
+ * @brief EXTI Trigger enumeration
+ */
+
+typedef enum
+{
+ EXTI_Trigger_Rising = 0x08,
+ EXTI_Trigger_Falling = 0x0C,
+ EXTI_Trigger_Rising_Falling = 0x10
+}EXTITrigger_TypeDef;
+
+#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \
+ ((TRIGGER) == EXTI_Trigger_Falling) || \
+ ((TRIGGER) == EXTI_Trigger_Rising_Falling))
+/**
+ * @brief EXTI Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t EXTI_Line; /*!< Specifies the EXTI lines to be enabled or disabled.
+ This parameter can be any combination of @ref EXTI_Lines */
+
+ EXTIMode_TypeDef EXTI_Mode; /*!< Specifies the mode for the EXTI lines.
+ This parameter can be a value of @ref EXTIMode_TypeDef */
+
+ EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
+ This parameter can be a value of @ref EXTIMode_TypeDef */
+
+ FunctionalState EXTI_LineCmd; /*!< Specifies the new state of the selected EXTI lines.
+ This parameter can be set either to ENABLE or DISABLE */
+}EXTI_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Exported_Constants
+ * @{
+ */
+
+/** @defgroup EXTI_Lines
+ * @{
+ */
+
+#define EXTI_Line0 ((uint32_t)0x00001) /*!< External interrupt line 0 */
+#define EXTI_Line1 ((uint32_t)0x00002) /*!< External interrupt line 1 */
+#define EXTI_Line2 ((uint32_t)0x00004) /*!< External interrupt line 2 */
+#define EXTI_Line3 ((uint32_t)0x00008) /*!< External interrupt line 3 */
+#define EXTI_Line4 ((uint32_t)0x00010) /*!< External interrupt line 4 */
+#define EXTI_Line5 ((uint32_t)0x00020) /*!< External interrupt line 5 */
+#define EXTI_Line6 ((uint32_t)0x00040) /*!< External interrupt line 6 */
+#define EXTI_Line7 ((uint32_t)0x00080) /*!< External interrupt line 7 */
+#define EXTI_Line8 ((uint32_t)0x00100) /*!< External interrupt line 8 */
+#define EXTI_Line9 ((uint32_t)0x00200) /*!< External interrupt line 9 */
+#define EXTI_Line10 ((uint32_t)0x00400) /*!< External interrupt line 10 */
+#define EXTI_Line11 ((uint32_t)0x00800) /*!< External interrupt line 11 */
+#define EXTI_Line12 ((uint32_t)0x01000) /*!< External interrupt line 12 */
+#define EXTI_Line13 ((uint32_t)0x02000) /*!< External interrupt line 13 */
+#define EXTI_Line14 ((uint32_t)0x04000) /*!< External interrupt line 14 */
+#define EXTI_Line15 ((uint32_t)0x08000) /*!< External interrupt line 15 */
+#define EXTI_Line16 ((uint32_t)0x10000) /*!< External interrupt line 16 Connected to the PVD Output */
+#define EXTI_Line17 ((uint32_t)0x20000) /*!< External interrupt line 17 Connected to the RTC Alarm event */
+#define EXTI_Line18 ((uint32_t)0x40000) /*!< External interrupt line 18 Connected to the USB Device/USB OTG FS
+ Wakeup from suspend event */
+#define EXTI_Line19 ((uint32_t)0x80000) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
+
+#define IS_EXTI_LINE(LINE) ((((LINE) & (uint32_t)0xFFF00000) == 0x00) && ((LINE) != (uint16_t)0x00))
+#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \
+ ((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \
+ ((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \
+ ((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \
+ ((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \
+ ((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \
+ ((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \
+ ((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \
+ ((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \
+ ((LINE) == EXTI_Line18) || ((LINE) == EXTI_Line19))
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Exported_Functions
+ * @{
+ */
+
+void EXTI_DeInit(void);
+void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct);
+void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct);
+void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line);
+FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line);
+void EXTI_ClearFlag(uint32_t EXTI_Line);
+ITStatus EXTI_GetITStatus(uint32_t EXTI_Line);
+void EXTI_ClearITPendingBit(uint32_t EXTI_Line);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_EXTI_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_flash.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_flash.h
new file mode 100644
index 00000000..f46d4e87
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_flash.h
@@ -0,0 +1,426 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_flash.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the FLASH
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_FLASH_H
+#define __STM32F10x_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH
+ * @{
+ */
+
+/** @defgroup FLASH_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief FLASH Status
+ */
+
+typedef enum
+{
+ FLASH_BUSY = 1,
+ FLASH_ERROR_PG,
+ FLASH_ERROR_WRP,
+ FLASH_COMPLETE,
+ FLASH_TIMEOUT
+}FLASH_Status;
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Constants
+ * @{
+ */
+
+/** @defgroup Flash_Latency
+ * @{
+ */
+
+#define FLASH_Latency_0 ((uint32_t)0x00000000) /*!< FLASH Zero Latency cycle */
+#define FLASH_Latency_1 ((uint32_t)0x00000001) /*!< FLASH One Latency cycle */
+#define FLASH_Latency_2 ((uint32_t)0x00000002) /*!< FLASH Two Latency cycles */
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \
+ ((LATENCY) == FLASH_Latency_1) || \
+ ((LATENCY) == FLASH_Latency_2))
+/**
+ * @}
+ */
+
+/** @defgroup Half_Cycle_Enable_Disable
+ * @{
+ */
+
+#define FLASH_HalfCycleAccess_Enable ((uint32_t)0x00000008) /*!< FLASH Half Cycle Enable */
+#define FLASH_HalfCycleAccess_Disable ((uint32_t)0x00000000) /*!< FLASH Half Cycle Disable */
+#define IS_FLASH_HALFCYCLEACCESS_STATE(STATE) (((STATE) == FLASH_HalfCycleAccess_Enable) || \
+ ((STATE) == FLASH_HalfCycleAccess_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup Prefetch_Buffer_Enable_Disable
+ * @{
+ */
+
+#define FLASH_PrefetchBuffer_Enable ((uint32_t)0x00000010) /*!< FLASH Prefetch Buffer Enable */
+#define FLASH_PrefetchBuffer_Disable ((uint32_t)0x00000000) /*!< FLASH Prefetch Buffer Disable */
+#define IS_FLASH_PREFETCHBUFFER_STATE(STATE) (((STATE) == FLASH_PrefetchBuffer_Enable) || \
+ ((STATE) == FLASH_PrefetchBuffer_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup Option_Bytes_Write_Protection
+ * @{
+ */
+
+/* Values to be used with STM32 Low and Medium density devices */
+#define FLASH_WRProt_Pages0to3 ((uint32_t)0x00000001) /*!< STM32 Low and Medium density devices: Write protection of page 0 to 3 */
+#define FLASH_WRProt_Pages4to7 ((uint32_t)0x00000002) /*!< STM32 Low and Medium density devices: Write protection of page 4 to 7 */
+#define FLASH_WRProt_Pages8to11 ((uint32_t)0x00000004) /*!< STM32 Low and Medium density devices: Write protection of page 8 to 11 */
+#define FLASH_WRProt_Pages12to15 ((uint32_t)0x00000008) /*!< STM32 Low and Medium density devices: Write protection of page 12 to 15 */
+#define FLASH_WRProt_Pages16to19 ((uint32_t)0x00000010) /*!< STM32 Low and Medium density devices: Write protection of page 16 to 19 */
+#define FLASH_WRProt_Pages20to23 ((uint32_t)0x00000020) /*!< STM32 Low and Medium density devices: Write protection of page 20 to 23 */
+#define FLASH_WRProt_Pages24to27 ((uint32_t)0x00000040) /*!< STM32 Low and Medium density devices: Write protection of page 24 to 27 */
+#define FLASH_WRProt_Pages28to31 ((uint32_t)0x00000080) /*!< STM32 Low and Medium density devices: Write protection of page 28 to 31 */
+
+/* Values to be used with STM32 Medium-density devices */
+#define FLASH_WRProt_Pages32to35 ((uint32_t)0x00000100) /*!< STM32 Medium-density devices: Write protection of page 32 to 35 */
+#define FLASH_WRProt_Pages36to39 ((uint32_t)0x00000200) /*!< STM32 Medium-density devices: Write protection of page 36 to 39 */
+#define FLASH_WRProt_Pages40to43 ((uint32_t)0x00000400) /*!< STM32 Medium-density devices: Write protection of page 40 to 43 */
+#define FLASH_WRProt_Pages44to47 ((uint32_t)0x00000800) /*!< STM32 Medium-density devices: Write protection of page 44 to 47 */
+#define FLASH_WRProt_Pages48to51 ((uint32_t)0x00001000) /*!< STM32 Medium-density devices: Write protection of page 48 to 51 */
+#define FLASH_WRProt_Pages52to55 ((uint32_t)0x00002000) /*!< STM32 Medium-density devices: Write protection of page 52 to 55 */
+#define FLASH_WRProt_Pages56to59 ((uint32_t)0x00004000) /*!< STM32 Medium-density devices: Write protection of page 56 to 59 */
+#define FLASH_WRProt_Pages60to63 ((uint32_t)0x00008000) /*!< STM32 Medium-density devices: Write protection of page 60 to 63 */
+#define FLASH_WRProt_Pages64to67 ((uint32_t)0x00010000) /*!< STM32 Medium-density devices: Write protection of page 64 to 67 */
+#define FLASH_WRProt_Pages68to71 ((uint32_t)0x00020000) /*!< STM32 Medium-density devices: Write protection of page 68 to 71 */
+#define FLASH_WRProt_Pages72to75 ((uint32_t)0x00040000) /*!< STM32 Medium-density devices: Write protection of page 72 to 75 */
+#define FLASH_WRProt_Pages76to79 ((uint32_t)0x00080000) /*!< STM32 Medium-density devices: Write protection of page 76 to 79 */
+#define FLASH_WRProt_Pages80to83 ((uint32_t)0x00100000) /*!< STM32 Medium-density devices: Write protection of page 80 to 83 */
+#define FLASH_WRProt_Pages84to87 ((uint32_t)0x00200000) /*!< STM32 Medium-density devices: Write protection of page 84 to 87 */
+#define FLASH_WRProt_Pages88to91 ((uint32_t)0x00400000) /*!< STM32 Medium-density devices: Write protection of page 88 to 91 */
+#define FLASH_WRProt_Pages92to95 ((uint32_t)0x00800000) /*!< STM32 Medium-density devices: Write protection of page 92 to 95 */
+#define FLASH_WRProt_Pages96to99 ((uint32_t)0x01000000) /*!< STM32 Medium-density devices: Write protection of page 96 to 99 */
+#define FLASH_WRProt_Pages100to103 ((uint32_t)0x02000000) /*!< STM32 Medium-density devices: Write protection of page 100 to 103 */
+#define FLASH_WRProt_Pages104to107 ((uint32_t)0x04000000) /*!< STM32 Medium-density devices: Write protection of page 104 to 107 */
+#define FLASH_WRProt_Pages108to111 ((uint32_t)0x08000000) /*!< STM32 Medium-density devices: Write protection of page 108 to 111 */
+#define FLASH_WRProt_Pages112to115 ((uint32_t)0x10000000) /*!< STM32 Medium-density devices: Write protection of page 112 to 115 */
+#define FLASH_WRProt_Pages116to119 ((uint32_t)0x20000000) /*!< STM32 Medium-density devices: Write protection of page 115 to 119 */
+#define FLASH_WRProt_Pages120to123 ((uint32_t)0x40000000) /*!< STM32 Medium-density devices: Write protection of page 120 to 123 */
+#define FLASH_WRProt_Pages124to127 ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 124 to 127 */
+
+/* Values to be used with STM32 High-density and STM32F10X Connectivity line devices */
+#define FLASH_WRProt_Pages0to1 ((uint32_t)0x00000001) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 0 to 1 */
+#define FLASH_WRProt_Pages2to3 ((uint32_t)0x00000002) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 2 to 3 */
+#define FLASH_WRProt_Pages4to5 ((uint32_t)0x00000004) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 4 to 5 */
+#define FLASH_WRProt_Pages6to7 ((uint32_t)0x00000008) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 6 to 7 */
+#define FLASH_WRProt_Pages8to9 ((uint32_t)0x00000010) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 8 to 9 */
+#define FLASH_WRProt_Pages10to11 ((uint32_t)0x00000020) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 10 to 11 */
+#define FLASH_WRProt_Pages12to13 ((uint32_t)0x00000040) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 12 to 13 */
+#define FLASH_WRProt_Pages14to15 ((uint32_t)0x00000080) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 14 to 15 */
+#define FLASH_WRProt_Pages16to17 ((uint32_t)0x00000100) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 16 to 17 */
+#define FLASH_WRProt_Pages18to19 ((uint32_t)0x00000200) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 18 to 19 */
+#define FLASH_WRProt_Pages20to21 ((uint32_t)0x00000400) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 20 to 21 */
+#define FLASH_WRProt_Pages22to23 ((uint32_t)0x00000800) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 22 to 23 */
+#define FLASH_WRProt_Pages24to25 ((uint32_t)0x00001000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 24 to 25 */
+#define FLASH_WRProt_Pages26to27 ((uint32_t)0x00002000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 26 to 27 */
+#define FLASH_WRProt_Pages28to29 ((uint32_t)0x00004000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 28 to 29 */
+#define FLASH_WRProt_Pages30to31 ((uint32_t)0x00008000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 30 to 31 */
+#define FLASH_WRProt_Pages32to33 ((uint32_t)0x00010000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 32 to 33 */
+#define FLASH_WRProt_Pages34to35 ((uint32_t)0x00020000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 34 to 35 */
+#define FLASH_WRProt_Pages36to37 ((uint32_t)0x00040000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 36 to 37 */
+#define FLASH_WRProt_Pages38to39 ((uint32_t)0x00080000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 38 to 39 */
+#define FLASH_WRProt_Pages40to41 ((uint32_t)0x00100000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 40 to 41 */
+#define FLASH_WRProt_Pages42to43 ((uint32_t)0x00200000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 42 to 43 */
+#define FLASH_WRProt_Pages44to45 ((uint32_t)0x00400000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 44 to 45 */
+#define FLASH_WRProt_Pages46to47 ((uint32_t)0x00800000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 46 to 47 */
+#define FLASH_WRProt_Pages48to49 ((uint32_t)0x01000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 48 to 49 */
+#define FLASH_WRProt_Pages50to51 ((uint32_t)0x02000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 50 to 51 */
+#define FLASH_WRProt_Pages52to53 ((uint32_t)0x04000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 52 to 53 */
+#define FLASH_WRProt_Pages54to55 ((uint32_t)0x08000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 54 to 55 */
+#define FLASH_WRProt_Pages56to57 ((uint32_t)0x10000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 56 to 57 */
+#define FLASH_WRProt_Pages58to59 ((uint32_t)0x20000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 58 to 59 */
+#define FLASH_WRProt_Pages60to61 ((uint32_t)0x40000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 60 to 61 */
+#define FLASH_WRProt_Pages62to127 ((uint32_t)0x80000000) /*!< STM32 Connectivity line devices: Write protection of page 62 to 127 */
+#define FLASH_WRProt_Pages62to255 ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 62 to 255 */
+#define FLASH_WRProt_Pages62to511 ((uint32_t)0x80000000) /*!< STM32 XL-density devices: Write protection of page 62 to 511 */
+
+#define FLASH_WRProt_AllPages ((uint32_t)0xFFFFFFFF) /*!< Write protection of all Pages */
+
+#define IS_FLASH_WRPROT_PAGE(PAGE) (((PAGE) != 0x00000000))
+
+#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x080FFFFF))
+
+#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806))
+
+/**
+ * @}
+ */
+
+/** @defgroup Option_Bytes_IWatchdog
+ * @{
+ */
+
+#define OB_IWDG_SW ((uint16_t)0x0001) /*!< Software IWDG selected */
+#define OB_IWDG_HW ((uint16_t)0x0000) /*!< Hardware IWDG selected */
+#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+
+/**
+ * @}
+ */
+
+/** @defgroup Option_Bytes_nRST_STOP
+ * @{
+ */
+
+#define OB_STOP_NoRST ((uint16_t)0x0002) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STOP */
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST))
+
+/**
+ * @}
+ */
+
+/** @defgroup Option_Bytes_nRST_STDBY
+ * @{
+ */
+
+#define OB_STDBY_NoRST ((uint16_t)0x0004) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STANDBY */
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST))
+
+#ifdef STM32F10X_XL
+/**
+ * @}
+ */
+/** @defgroup FLASH_Boot
+ * @{
+ */
+#define FLASH_BOOT_Bank1 ((uint16_t)0x0000) /*!< At startup, if boot pins are set in boot from user Flash position
+ and this parameter is selected the device will boot from Bank1(Default) */
+#define FLASH_BOOT_Bank2 ((uint16_t)0x0001) /*!< At startup, if boot pins are set in boot from user Flash position
+ and this parameter is selected the device will boot from Bank 2 or Bank 1,
+ depending on the activation of the bank */
+#define IS_FLASH_BOOT(BOOT) (((BOOT) == FLASH_BOOT_Bank1) || ((BOOT) == FLASH_BOOT_Bank2))
+#endif
+/**
+ * @}
+ */
+/** @defgroup FLASH_Interrupts
+ * @{
+ */
+#ifdef STM32F10X_XL
+#define FLASH_IT_BANK2_ERROR ((uint32_t)0x80000400) /*!< FPEC BANK2 error interrupt source */
+#define FLASH_IT_BANK2_EOP ((uint32_t)0x80001000) /*!< End of FLASH BANK2 Operation Interrupt source */
+
+#define FLASH_IT_BANK1_ERROR FLASH_IT_ERROR /*!< FPEC BANK1 error interrupt source */
+#define FLASH_IT_BANK1_EOP FLASH_IT_EOP /*!< End of FLASH BANK1 Operation Interrupt source */
+
+#define FLASH_IT_ERROR ((uint32_t)0x00000400) /*!< FPEC BANK1 error interrupt source */
+#define FLASH_IT_EOP ((uint32_t)0x00001000) /*!< End of FLASH BANK1 Operation Interrupt source */
+#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0x7FFFEBFF) == 0x00000000) && (((IT) != 0x00000000)))
+#else
+#define FLASH_IT_ERROR ((uint32_t)0x00000400) /*!< FPEC error interrupt source */
+#define FLASH_IT_EOP ((uint32_t)0x00001000) /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_BANK1_ERROR FLASH_IT_ERROR /*!< FPEC BANK1 error interrupt source */
+#define FLASH_IT_BANK1_EOP FLASH_IT_EOP /*!< End of FLASH BANK1 Operation Interrupt source */
+
+#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFFFFEBFF) == 0x00000000) && (((IT) != 0x00000000)))
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Flags
+ * @{
+ */
+#ifdef STM32F10X_XL
+#define FLASH_FLAG_BANK2_BSY ((uint32_t)0x80000001) /*!< FLASH BANK2 Busy flag */
+#define FLASH_FLAG_BANK2_EOP ((uint32_t)0x80000020) /*!< FLASH BANK2 End of Operation flag */
+#define FLASH_FLAG_BANK2_PGERR ((uint32_t)0x80000004) /*!< FLASH BANK2 Program error flag */
+#define FLASH_FLAG_BANK2_WRPRTERR ((uint32_t)0x80000010) /*!< FLASH BANK2 Write protected error flag */
+
+#define FLASH_FLAG_BANK1_BSY FLASH_FLAG_BSY /*!< FLASH BANK1 Busy flag*/
+#define FLASH_FLAG_BANK1_EOP FLASH_FLAG_EOP /*!< FLASH BANK1 End of Operation flag */
+#define FLASH_FLAG_BANK1_PGERR FLASH_FLAG_PGERR /*!< FLASH BANK1 Program error flag */
+#define FLASH_FLAG_BANK1_WRPRTERR FLASH_FLAG_WRPRTERR /*!< FLASH BANK1 Write protected error flag */
+
+#define FLASH_FLAG_BSY ((uint32_t)0x00000001) /*!< FLASH Busy flag */
+#define FLASH_FLAG_EOP ((uint32_t)0x00000020) /*!< FLASH End of Operation flag */
+#define FLASH_FLAG_PGERR ((uint32_t)0x00000004) /*!< FLASH Program error flag */
+#define FLASH_FLAG_WRPRTERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_OPTERR ((uint32_t)0x00000001) /*!< FLASH Option Byte error flag */
+
+#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0x7FFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000))
+#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \
+ ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \
+ ((FLAG) == FLASH_FLAG_OPTERR)|| \
+ ((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \
+ ((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \
+ ((FLAG) == FLASH_FLAG_BANK2_BSY) || ((FLAG) == FLASH_FLAG_BANK2_EOP) || \
+ ((FLAG) == FLASH_FLAG_BANK2_PGERR) || ((FLAG) == FLASH_FLAG_BANK2_WRPRTERR))
+#else
+#define FLASH_FLAG_BSY ((uint32_t)0x00000001) /*!< FLASH Busy flag */
+#define FLASH_FLAG_EOP ((uint32_t)0x00000020) /*!< FLASH End of Operation flag */
+#define FLASH_FLAG_PGERR ((uint32_t)0x00000004) /*!< FLASH Program error flag */
+#define FLASH_FLAG_WRPRTERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_OPTERR ((uint32_t)0x00000001) /*!< FLASH Option Byte error flag */
+
+#define FLASH_FLAG_BANK1_BSY FLASH_FLAG_BSY /*!< FLASH BANK1 Busy flag*/
+#define FLASH_FLAG_BANK1_EOP FLASH_FLAG_EOP /*!< FLASH BANK1 End of Operation flag */
+#define FLASH_FLAG_BANK1_PGERR FLASH_FLAG_PGERR /*!< FLASH BANK1 Program error flag */
+#define FLASH_FLAG_BANK1_WRPRTERR FLASH_FLAG_WRPRTERR /*!< FLASH BANK1 Write protected error flag */
+
+#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000))
+#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \
+ ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \
+ ((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \
+ ((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \
+ ((FLAG) == FLASH_FLAG_OPTERR))
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Functions
+ * @{
+ */
+
+/*------------ Functions used for all STM32F10x devices -----*/
+void FLASH_SetLatency(uint32_t FLASH_Latency);
+void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess);
+void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer);
+void FLASH_Unlock(void);
+void FLASH_Lock(void);
+FLASH_Status FLASH_ErasePage(uint32_t Page_Address);
+FLASH_Status FLASH_EraseAllPages(void);
+FLASH_Status FLASH_EraseOptionBytes(void);
+FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data);
+FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data);
+FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data);
+FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages);
+FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState);
+FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY);
+uint32_t FLASH_GetUserOptionByte(void);
+uint32_t FLASH_GetWriteProtectionOptionByte(void);
+FlagStatus FLASH_GetReadOutProtectionStatus(void);
+FlagStatus FLASH_GetPrefetchBufferStatus(void);
+void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState);
+FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG);
+void FLASH_ClearFlag(uint32_t FLASH_FLAG);
+FLASH_Status FLASH_GetStatus(void);
+FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout);
+
+/*------------ New function used for all STM32F10x devices -----*/
+void FLASH_UnlockBank1(void);
+void FLASH_LockBank1(void);
+FLASH_Status FLASH_EraseAllBank1Pages(void);
+FLASH_Status FLASH_GetBank1Status(void);
+FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout);
+
+#ifdef STM32F10X_XL
+/*---- New Functions used only with STM32F10x_XL density devices -----*/
+void FLASH_UnlockBank2(void);
+void FLASH_LockBank2(void);
+FLASH_Status FLASH_EraseAllBank2Pages(void);
+FLASH_Status FLASH_GetBank2Status(void);
+FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout);
+FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_FLASH_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_fsmc.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_fsmc.h
new file mode 100644
index 00000000..ee707e74
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_fsmc.h
@@ -0,0 +1,733 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_fsmc.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the FSMC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_FSMC_H
+#define __STM32F10x_FSMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup FSMC
+ * @{
+ */
+
+/** @defgroup FSMC_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief Timing parameters For NOR/SRAM Banks
+ */
+
+typedef struct
+{
+ uint32_t FSMC_AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address setup time.
+ This parameter can be a value between 0 and 0xF.
+ @note: It is not used with synchronous NOR Flash memories. */
+
+ uint32_t FSMC_AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address hold time.
+ This parameter can be a value between 0 and 0xF.
+ @note: It is not used with synchronous NOR Flash memories.*/
+
+ uint32_t FSMC_DataSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the data setup time.
+ This parameter can be a value between 0 and 0xFF.
+ @note: It is used for SRAMs, ROMs and asynchronous multiplexed NOR Flash memories. */
+
+ uint32_t FSMC_BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
+ the duration of the bus turnaround.
+ This parameter can be a value between 0 and 0xF.
+ @note: It is only used for multiplexed NOR Flash memories. */
+
+ uint32_t FSMC_CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of HCLK cycles.
+ This parameter can be a value between 1 and 0xF.
+ @note: This parameter is not used for asynchronous NOR Flash, SRAM or ROM accesses. */
+
+ uint32_t FSMC_DataLatency; /*!< Defines the number of memory clock cycles to issue
+ to the memory before getting the first data.
+ The value of this parameter depends on the memory type as shown below:
+ - It must be set to 0 in case of a CRAM
+ - It is don't care in asynchronous NOR, SRAM or ROM accesses
+ - It may assume a value between 0 and 0xF in NOR Flash memories
+ with synchronous burst mode enable */
+
+ uint32_t FSMC_AccessMode; /*!< Specifies the asynchronous access mode.
+ This parameter can be a value of @ref FSMC_Access_Mode */
+}FSMC_NORSRAMTimingInitTypeDef;
+
+/**
+ * @brief FSMC NOR/SRAM Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t FSMC_Bank; /*!< Specifies the NOR/SRAM memory bank that will be used.
+ This parameter can be a value of @ref FSMC_NORSRAM_Bank */
+
+ uint32_t FSMC_DataAddressMux; /*!< Specifies whether the address and data values are
+ multiplexed on the databus or not.
+ This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */
+
+ uint32_t FSMC_MemoryType; /*!< Specifies the type of external memory attached to
+ the corresponding memory bank.
+ This parameter can be a value of @ref FSMC_Memory_Type */
+
+ uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be a value of @ref FSMC_Data_Width */
+
+ uint32_t FSMC_BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
+ valid only with synchronous burst Flash memories.
+ This parameter can be a value of @ref FSMC_Burst_Access_Mode */
+
+ uint32_t FSMC_AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
+ valid only with asynchronous Flash memories.
+ This parameter can be a value of @ref FSMC_AsynchronousWait */
+
+ uint32_t FSMC_WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
+ the Flash memory in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */
+
+ uint32_t FSMC_WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
+ memory, valid only when accessing Flash memories in burst mode.
+ This parameter can be a value of @ref FSMC_Wrap_Mode */
+
+ uint32_t FSMC_WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
+ clock cycle before the wait state or during the wait state,
+ valid only when accessing memories in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Timing */
+
+ uint32_t FSMC_WriteOperation; /*!< Enables or disables the write operation in the selected bank by the FSMC.
+ This parameter can be a value of @ref FSMC_Write_Operation */
+
+ uint32_t FSMC_WaitSignal; /*!< Enables or disables the wait-state insertion via wait
+ signal, valid for Flash memory access in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Signal */
+
+ uint32_t FSMC_ExtendedMode; /*!< Enables or disables the extended mode.
+ This parameter can be a value of @ref FSMC_Extended_Mode */
+
+ uint32_t FSMC_WriteBurst; /*!< Enables or disables the write burst operation.
+ This parameter can be a value of @ref FSMC_Write_Burst */
+
+ FSMC_NORSRAMTimingInitTypeDef* FSMC_ReadWriteTimingStruct; /*!< Timing Parameters for write and read access if the ExtendedMode is not used*/
+
+ FSMC_NORSRAMTimingInitTypeDef* FSMC_WriteTimingStruct; /*!< Timing Parameters for write access if the ExtendedMode is used*/
+}FSMC_NORSRAMInitTypeDef;
+
+/**
+ * @brief Timing parameters For FSMC NAND and PCCARD Banks
+ */
+
+typedef struct
+{
+ uint32_t FSMC_SetupTime; /*!< Defines the number of HCLK cycles to setup address before
+ the command assertion for NAND-Flash read or write access
+ to common/Attribute or I/O memory space (depending on
+ the memory space timing to be configured).
+ This parameter can be a value between 0 and 0xFF.*/
+
+ uint32_t FSMC_WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
+ command for NAND-Flash read or write access to
+ common/Attribute or I/O memory space (depending on the
+ memory space timing to be configured).
+ This parameter can be a number between 0x00 and 0xFF */
+
+ uint32_t FSMC_HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
+ (and data for write access) after the command deassertion
+ for NAND-Flash read or write access to common/Attribute
+ or I/O memory space (depending on the memory space timing
+ to be configured).
+ This parameter can be a number between 0x00 and 0xFF */
+
+ uint32_t FSMC_HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
+ databus is kept in HiZ after the start of a NAND-Flash
+ write access to common/Attribute or I/O memory space (depending
+ on the memory space timing to be configured).
+ This parameter can be a number between 0x00 and 0xFF */
+}FSMC_NAND_PCCARDTimingInitTypeDef;
+
+/**
+ * @brief FSMC NAND Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t FSMC_Bank; /*!< Specifies the NAND memory bank that will be used.
+ This parameter can be a value of @ref FSMC_NAND_Bank */
+
+ uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory Bank.
+ This parameter can be any value of @ref FSMC_Wait_feature */
+
+ uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be any value of @ref FSMC_Data_Width */
+
+ uint32_t FSMC_ECC; /*!< Enables or disables the ECC computation.
+ This parameter can be any value of @ref FSMC_ECC */
+
+ uint32_t FSMC_ECCPageSize; /*!< Defines the page size for the extended ECC.
+ This parameter can be any value of @ref FSMC_ECC_Page_Size */
+
+ uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between 0 and 0xFF. */
+
+ uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between 0x0 and 0xFF */
+
+ FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */
+
+ FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */
+}FSMC_NANDInitTypeDef;
+
+/**
+ * @brief FSMC PCCARD Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the Memory Bank.
+ This parameter can be any value of @ref FSMC_Wait_feature */
+
+ uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between 0 and 0xFF. */
+
+ uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between 0x0 and 0xFF */
+
+
+ FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */
+
+ FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */
+
+ FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_IOSpaceTimingStruct; /*!< FSMC IO Space Timing */
+}FSMC_PCCARDInitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup FSMC_NORSRAM_Bank
+ * @{
+ */
+#define FSMC_Bank1_NORSRAM1 ((uint32_t)0x00000000)
+#define FSMC_Bank1_NORSRAM2 ((uint32_t)0x00000002)
+#define FSMC_Bank1_NORSRAM3 ((uint32_t)0x00000004)
+#define FSMC_Bank1_NORSRAM4 ((uint32_t)0x00000006)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NAND_Bank
+ * @{
+ */
+#define FSMC_Bank2_NAND ((uint32_t)0x00000010)
+#define FSMC_Bank3_NAND ((uint32_t)0x00000100)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_PCCARD_Bank
+ * @{
+ */
+#define FSMC_Bank4_PCCARD ((uint32_t)0x00001000)
+/**
+ * @}
+ */
+
+#define IS_FSMC_NORSRAM_BANK(BANK) (((BANK) == FSMC_Bank1_NORSRAM1) || \
+ ((BANK) == FSMC_Bank1_NORSRAM2) || \
+ ((BANK) == FSMC_Bank1_NORSRAM3) || \
+ ((BANK) == FSMC_Bank1_NORSRAM4))
+
+#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
+ ((BANK) == FSMC_Bank3_NAND))
+
+#define IS_FSMC_GETFLAG_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
+ ((BANK) == FSMC_Bank3_NAND) || \
+ ((BANK) == FSMC_Bank4_PCCARD))
+
+#define IS_FSMC_IT_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
+ ((BANK) == FSMC_Bank3_NAND) || \
+ ((BANK) == FSMC_Bank4_PCCARD))
+
+/** @defgroup NOR_SRAM_Controller
+ * @{
+ */
+
+/** @defgroup FSMC_Data_Address_Bus_Multiplexing
+ * @{
+ */
+
+#define FSMC_DataAddressMux_Disable ((uint32_t)0x00000000)
+#define FSMC_DataAddressMux_Enable ((uint32_t)0x00000002)
+#define IS_FSMC_MUX(MUX) (((MUX) == FSMC_DataAddressMux_Disable) || \
+ ((MUX) == FSMC_DataAddressMux_Enable))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Memory_Type
+ * @{
+ */
+
+#define FSMC_MemoryType_SRAM ((uint32_t)0x00000000)
+#define FSMC_MemoryType_PSRAM ((uint32_t)0x00000004)
+#define FSMC_MemoryType_NOR ((uint32_t)0x00000008)
+#define IS_FSMC_MEMORY(MEMORY) (((MEMORY) == FSMC_MemoryType_SRAM) || \
+ ((MEMORY) == FSMC_MemoryType_PSRAM)|| \
+ ((MEMORY) == FSMC_MemoryType_NOR))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Data_Width
+ * @{
+ */
+
+#define FSMC_MemoryDataWidth_8b ((uint32_t)0x00000000)
+#define FSMC_MemoryDataWidth_16b ((uint32_t)0x00000010)
+#define IS_FSMC_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \
+ ((WIDTH) == FSMC_MemoryDataWidth_16b))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Burst_Access_Mode
+ * @{
+ */
+
+#define FSMC_BurstAccessMode_Disable ((uint32_t)0x00000000)
+#define FSMC_BurstAccessMode_Enable ((uint32_t)0x00000100)
+#define IS_FSMC_BURSTMODE(STATE) (((STATE) == FSMC_BurstAccessMode_Disable) || \
+ ((STATE) == FSMC_BurstAccessMode_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_AsynchronousWait
+ * @{
+ */
+#define FSMC_AsynchronousWait_Disable ((uint32_t)0x00000000)
+#define FSMC_AsynchronousWait_Enable ((uint32_t)0x00008000)
+#define IS_FSMC_ASYNWAIT(STATE) (((STATE) == FSMC_AsynchronousWait_Disable) || \
+ ((STATE) == FSMC_AsynchronousWait_Enable))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Signal_Polarity
+ * @{
+ */
+
+#define FSMC_WaitSignalPolarity_Low ((uint32_t)0x00000000)
+#define FSMC_WaitSignalPolarity_High ((uint32_t)0x00000200)
+#define IS_FSMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FSMC_WaitSignalPolarity_Low) || \
+ ((POLARITY) == FSMC_WaitSignalPolarity_High))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wrap_Mode
+ * @{
+ */
+
+#define FSMC_WrapMode_Disable ((uint32_t)0x00000000)
+#define FSMC_WrapMode_Enable ((uint32_t)0x00000400)
+#define IS_FSMC_WRAP_MODE(MODE) (((MODE) == FSMC_WrapMode_Disable) || \
+ ((MODE) == FSMC_WrapMode_Enable))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Timing
+ * @{
+ */
+
+#define FSMC_WaitSignalActive_BeforeWaitState ((uint32_t)0x00000000)
+#define FSMC_WaitSignalActive_DuringWaitState ((uint32_t)0x00000800)
+#define IS_FSMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FSMC_WaitSignalActive_BeforeWaitState) || \
+ ((ACTIVE) == FSMC_WaitSignalActive_DuringWaitState))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Write_Operation
+ * @{
+ */
+
+#define FSMC_WriteOperation_Disable ((uint32_t)0x00000000)
+#define FSMC_WriteOperation_Enable ((uint32_t)0x00001000)
+#define IS_FSMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FSMC_WriteOperation_Disable) || \
+ ((OPERATION) == FSMC_WriteOperation_Enable))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Signal
+ * @{
+ */
+
+#define FSMC_WaitSignal_Disable ((uint32_t)0x00000000)
+#define FSMC_WaitSignal_Enable ((uint32_t)0x00002000)
+#define IS_FSMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FSMC_WaitSignal_Disable) || \
+ ((SIGNAL) == FSMC_WaitSignal_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Extended_Mode
+ * @{
+ */
+
+#define FSMC_ExtendedMode_Disable ((uint32_t)0x00000000)
+#define FSMC_ExtendedMode_Enable ((uint32_t)0x00004000)
+
+#define IS_FSMC_EXTENDED_MODE(MODE) (((MODE) == FSMC_ExtendedMode_Disable) || \
+ ((MODE) == FSMC_ExtendedMode_Enable))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Write_Burst
+ * @{
+ */
+
+#define FSMC_WriteBurst_Disable ((uint32_t)0x00000000)
+#define FSMC_WriteBurst_Enable ((uint32_t)0x00080000)
+#define IS_FSMC_WRITE_BURST(BURST) (((BURST) == FSMC_WriteBurst_Disable) || \
+ ((BURST) == FSMC_WriteBurst_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Address_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 0xF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Address_Hold_Time
+ * @{
+ */
+
+#define IS_FSMC_ADDRESS_HOLD_TIME(TIME) ((TIME) <= 0xF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Data_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 0xFF))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Bus_Turn_around_Duration
+ * @{
+ */
+
+#define IS_FSMC_TURNAROUND_TIME(TIME) ((TIME) <= 0xF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_CLK_Division
+ * @{
+ */
+
+#define IS_FSMC_CLK_DIV(DIV) ((DIV) <= 0xF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Data_Latency
+ * @{
+ */
+
+#define IS_FSMC_DATA_LATENCY(LATENCY) ((LATENCY) <= 0xF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Access_Mode
+ * @{
+ */
+
+#define FSMC_AccessMode_A ((uint32_t)0x00000000)
+#define FSMC_AccessMode_B ((uint32_t)0x10000000)
+#define FSMC_AccessMode_C ((uint32_t)0x20000000)
+#define FSMC_AccessMode_D ((uint32_t)0x30000000)
+#define IS_FSMC_ACCESS_MODE(MODE) (((MODE) == FSMC_AccessMode_A) || \
+ ((MODE) == FSMC_AccessMode_B) || \
+ ((MODE) == FSMC_AccessMode_C) || \
+ ((MODE) == FSMC_AccessMode_D))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup NAND_PCCARD_Controller
+ * @{
+ */
+
+/** @defgroup FSMC_Wait_feature
+ * @{
+ */
+
+#define FSMC_Waitfeature_Disable ((uint32_t)0x00000000)
+#define FSMC_Waitfeature_Enable ((uint32_t)0x00000002)
+#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_Waitfeature_Disable) || \
+ ((FEATURE) == FSMC_Waitfeature_Enable))
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FSMC_ECC
+ * @{
+ */
+
+#define FSMC_ECC_Disable ((uint32_t)0x00000000)
+#define FSMC_ECC_Enable ((uint32_t)0x00000040)
+#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_ECC_Disable) || \
+ ((STATE) == FSMC_ECC_Enable))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_ECC_Page_Size
+ * @{
+ */
+
+#define FSMC_ECCPageSize_256Bytes ((uint32_t)0x00000000)
+#define FSMC_ECCPageSize_512Bytes ((uint32_t)0x00020000)
+#define FSMC_ECCPageSize_1024Bytes ((uint32_t)0x00040000)
+#define FSMC_ECCPageSize_2048Bytes ((uint32_t)0x00060000)
+#define FSMC_ECCPageSize_4096Bytes ((uint32_t)0x00080000)
+#define FSMC_ECCPageSize_8192Bytes ((uint32_t)0x000A0000)
+#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_ECCPageSize_256Bytes) || \
+ ((SIZE) == FSMC_ECCPageSize_512Bytes) || \
+ ((SIZE) == FSMC_ECCPageSize_1024Bytes) || \
+ ((SIZE) == FSMC_ECCPageSize_2048Bytes) || \
+ ((SIZE) == FSMC_ECCPageSize_4096Bytes) || \
+ ((SIZE) == FSMC_ECCPageSize_8192Bytes))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_TCLR_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_TAR_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Hold_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_HiZ_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Interrupt_sources
+ * @{
+ */
+
+#define FSMC_IT_RisingEdge ((uint32_t)0x00000008)
+#define FSMC_IT_Level ((uint32_t)0x00000010)
+#define FSMC_IT_FallingEdge ((uint32_t)0x00000020)
+#define IS_FSMC_IT(IT) ((((IT) & (uint32_t)0xFFFFFFC7) == 0x00000000) && ((IT) != 0x00000000))
+#define IS_FSMC_GET_IT(IT) (((IT) == FSMC_IT_RisingEdge) || \
+ ((IT) == FSMC_IT_Level) || \
+ ((IT) == FSMC_IT_FallingEdge))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Flags
+ * @{
+ */
+
+#define FSMC_FLAG_RisingEdge ((uint32_t)0x00000001)
+#define FSMC_FLAG_Level ((uint32_t)0x00000002)
+#define FSMC_FLAG_FallingEdge ((uint32_t)0x00000004)
+#define FSMC_FLAG_FEMPT ((uint32_t)0x00000040)
+#define IS_FSMC_GET_FLAG(FLAG) (((FLAG) == FSMC_FLAG_RisingEdge) || \
+ ((FLAG) == FSMC_FLAG_Level) || \
+ ((FLAG) == FSMC_FLAG_FallingEdge) || \
+ ((FLAG) == FSMC_FLAG_FEMPT))
+
+#define IS_FSMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Exported_Functions
+ * @{
+ */
+
+void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank);
+void FSMC_NANDDeInit(uint32_t FSMC_Bank);
+void FSMC_PCCARDDeInit(void);
+void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct);
+void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct);
+void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct);
+void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct);
+void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct);
+void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct);
+void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState);
+void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState);
+void FSMC_PCCARDCmd(FunctionalState NewState);
+void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState);
+uint32_t FSMC_GetECC(uint32_t FSMC_Bank);
+void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState);
+FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG);
+void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG);
+ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT);
+void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_FSMC_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_gpio.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_gpio.h
new file mode 100644
index 00000000..b8aa49a2
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_gpio.h
@@ -0,0 +1,385 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_gpio.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the GPIO
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_GPIO_H
+#define __STM32F10x_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/** @defgroup GPIO_Exported_Types
+ * @{
+ */
+
+#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \
+ ((PERIPH) == GPIOB) || \
+ ((PERIPH) == GPIOC) || \
+ ((PERIPH) == GPIOD) || \
+ ((PERIPH) == GPIOE) || \
+ ((PERIPH) == GPIOF) || \
+ ((PERIPH) == GPIOG))
+
+/**
+ * @brief Output Maximum frequency selection
+ */
+
+typedef enum
+{
+ GPIO_Speed_10MHz = 1,
+ GPIO_Speed_2MHz,
+ GPIO_Speed_50MHz
+}GPIOSpeed_TypeDef;
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_10MHz) || ((SPEED) == GPIO_Speed_2MHz) || \
+ ((SPEED) == GPIO_Speed_50MHz))
+
+/**
+ * @brief Configuration Mode enumeration
+ */
+
+typedef enum
+{ GPIO_Mode_AIN = 0x0,
+ GPIO_Mode_IN_FLOATING = 0x04,
+ GPIO_Mode_IPD = 0x28,
+ GPIO_Mode_IPU = 0x48,
+ GPIO_Mode_Out_OD = 0x14,
+ GPIO_Mode_Out_PP = 0x10,
+ GPIO_Mode_AF_OD = 0x1C,
+ GPIO_Mode_AF_PP = 0x18
+}GPIOMode_TypeDef;
+
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_AIN) || ((MODE) == GPIO_Mode_IN_FLOATING) || \
+ ((MODE) == GPIO_Mode_IPD) || ((MODE) == GPIO_Mode_IPU) || \
+ ((MODE) == GPIO_Mode_Out_OD) || ((MODE) == GPIO_Mode_Out_PP) || \
+ ((MODE) == GPIO_Mode_AF_OD) || ((MODE) == GPIO_Mode_AF_PP))
+
+/**
+ * @brief GPIO Init structure definition
+ */
+
+typedef struct
+{
+ uint16_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_pins_define */
+
+ GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIOSpeed_TypeDef */
+
+ GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIOMode_TypeDef */
+}GPIO_InitTypeDef;
+
+
+/**
+ * @brief Bit_SET and Bit_RESET enumeration
+ */
+
+typedef enum
+{ Bit_RESET = 0,
+ Bit_SET
+}BitAction;
+
+#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET))
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Exported_Constants
+ * @{
+ */
+
+/** @defgroup GPIO_pins_define
+ * @{
+ */
+
+#define GPIO_Pin_0 ((uint16_t)0x0001) /*!< Pin 0 selected */
+#define GPIO_Pin_1 ((uint16_t)0x0002) /*!< Pin 1 selected */
+#define GPIO_Pin_2 ((uint16_t)0x0004) /*!< Pin 2 selected */
+#define GPIO_Pin_3 ((uint16_t)0x0008) /*!< Pin 3 selected */
+#define GPIO_Pin_4 ((uint16_t)0x0010) /*!< Pin 4 selected */
+#define GPIO_Pin_5 ((uint16_t)0x0020) /*!< Pin 5 selected */
+#define GPIO_Pin_6 ((uint16_t)0x0040) /*!< Pin 6 selected */
+#define GPIO_Pin_7 ((uint16_t)0x0080) /*!< Pin 7 selected */
+#define GPIO_Pin_8 ((uint16_t)0x0100) /*!< Pin 8 selected */
+#define GPIO_Pin_9 ((uint16_t)0x0200) /*!< Pin 9 selected */
+#define GPIO_Pin_10 ((uint16_t)0x0400) /*!< Pin 10 selected */
+#define GPIO_Pin_11 ((uint16_t)0x0800) /*!< Pin 11 selected */
+#define GPIO_Pin_12 ((uint16_t)0x1000) /*!< Pin 12 selected */
+#define GPIO_Pin_13 ((uint16_t)0x2000) /*!< Pin 13 selected */
+#define GPIO_Pin_14 ((uint16_t)0x4000) /*!< Pin 14 selected */
+#define GPIO_Pin_15 ((uint16_t)0x8000) /*!< Pin 15 selected */
+#define GPIO_Pin_All ((uint16_t)0xFFFF) /*!< All pins selected */
+
+#define IS_GPIO_PIN(PIN) ((((PIN) & (uint16_t)0x00) == 0x00) && ((PIN) != (uint16_t)0x00))
+
+#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \
+ ((PIN) == GPIO_Pin_1) || \
+ ((PIN) == GPIO_Pin_2) || \
+ ((PIN) == GPIO_Pin_3) || \
+ ((PIN) == GPIO_Pin_4) || \
+ ((PIN) == GPIO_Pin_5) || \
+ ((PIN) == GPIO_Pin_6) || \
+ ((PIN) == GPIO_Pin_7) || \
+ ((PIN) == GPIO_Pin_8) || \
+ ((PIN) == GPIO_Pin_9) || \
+ ((PIN) == GPIO_Pin_10) || \
+ ((PIN) == GPIO_Pin_11) || \
+ ((PIN) == GPIO_Pin_12) || \
+ ((PIN) == GPIO_Pin_13) || \
+ ((PIN) == GPIO_Pin_14) || \
+ ((PIN) == GPIO_Pin_15))
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Remap_define
+ * @{
+ */
+
+#define GPIO_Remap_SPI1 ((uint32_t)0x00000001) /*!< SPI1 Alternate Function mapping */
+#define GPIO_Remap_I2C1 ((uint32_t)0x00000002) /*!< I2C1 Alternate Function mapping */
+#define GPIO_Remap_USART1 ((uint32_t)0x00000004) /*!< USART1 Alternate Function mapping */
+#define GPIO_Remap_USART2 ((uint32_t)0x00000008) /*!< USART2 Alternate Function mapping */
+#define GPIO_PartialRemap_USART3 ((uint32_t)0x00140010) /*!< USART3 Partial Alternate Function mapping */
+#define GPIO_FullRemap_USART3 ((uint32_t)0x00140030) /*!< USART3 Full Alternate Function mapping */
+#define GPIO_PartialRemap_TIM1 ((uint32_t)0x00160040) /*!< TIM1 Partial Alternate Function mapping */
+#define GPIO_FullRemap_TIM1 ((uint32_t)0x001600C0) /*!< TIM1 Full Alternate Function mapping */
+#define GPIO_PartialRemap1_TIM2 ((uint32_t)0x00180100) /*!< TIM2 Partial1 Alternate Function mapping */
+#define GPIO_PartialRemap2_TIM2 ((uint32_t)0x00180200) /*!< TIM2 Partial2 Alternate Function mapping */
+#define GPIO_FullRemap_TIM2 ((uint32_t)0x00180300) /*!< TIM2 Full Alternate Function mapping */
+#define GPIO_PartialRemap_TIM3 ((uint32_t)0x001A0800) /*!< TIM3 Partial Alternate Function mapping */
+#define GPIO_FullRemap_TIM3 ((uint32_t)0x001A0C00) /*!< TIM3 Full Alternate Function mapping */
+#define GPIO_Remap_TIM4 ((uint32_t)0x00001000) /*!< TIM4 Alternate Function mapping */
+#define GPIO_Remap1_CAN1 ((uint32_t)0x001D4000) /*!< CAN1 Alternate Function mapping */
+#define GPIO_Remap2_CAN1 ((uint32_t)0x001D6000) /*!< CAN1 Alternate Function mapping */
+#define GPIO_Remap_PD01 ((uint32_t)0x00008000) /*!< PD01 Alternate Function mapping */
+#define GPIO_Remap_TIM5CH4_LSI ((uint32_t)0x00200001) /*!< LSI connected to TIM5 Channel4 input capture for calibration */
+#define GPIO_Remap_ADC1_ETRGINJ ((uint32_t)0x00200002) /*!< ADC1 External Trigger Injected Conversion remapping */
+#define GPIO_Remap_ADC1_ETRGREG ((uint32_t)0x00200004) /*!< ADC1 External Trigger Regular Conversion remapping */
+#define GPIO_Remap_ADC2_ETRGINJ ((uint32_t)0x00200008) /*!< ADC2 External Trigger Injected Conversion remapping */
+#define GPIO_Remap_ADC2_ETRGREG ((uint32_t)0x00200010) /*!< ADC2 External Trigger Regular Conversion remapping */
+#define GPIO_Remap_ETH ((uint32_t)0x00200020) /*!< Ethernet remapping (only for Connectivity line devices) */
+#define GPIO_Remap_CAN2 ((uint32_t)0x00200040) /*!< CAN2 remapping (only for Connectivity line devices) */
+#define GPIO_Remap_SWJ_NoJTRST ((uint32_t)0x00300100) /*!< Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST */
+#define GPIO_Remap_SWJ_JTAGDisable ((uint32_t)0x00300200) /*!< JTAG-DP Disabled and SW-DP Enabled */
+#define GPIO_Remap_SWJ_Disable ((uint32_t)0x00300400) /*!< Full SWJ Disabled (JTAG-DP + SW-DP) */
+#define GPIO_Remap_SPI3 ((uint32_t)0x00201100) /*!< SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) */
+#define GPIO_Remap_TIM2ITR1_PTP_SOF ((uint32_t)0x00202000) /*!< Ethernet PTP output or USB OTG SOF (Start of Frame) connected
+ to TIM2 Internal Trigger 1 for calibration
+ (only for Connectivity line devices) */
+#define GPIO_Remap_PTP_PPS ((uint32_t)0x00204000) /*!< Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices) */
+
+#define GPIO_Remap_TIM15 ((uint32_t)0x80000001) /*!< TIM15 Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_TIM16 ((uint32_t)0x80000002) /*!< TIM16 Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_TIM17 ((uint32_t)0x80000004) /*!< TIM17 Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_CEC ((uint32_t)0x80000008) /*!< CEC Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_TIM1_DMA ((uint32_t)0x80000010) /*!< TIM1 DMA requests mapping (only for Value line devices) */
+
+#define GPIO_Remap_TIM9 ((uint32_t)0x80000020) /*!< TIM9 Alternate Function mapping (only for XL-density devices) */
+#define GPIO_Remap_TIM10 ((uint32_t)0x80000040) /*!< TIM10 Alternate Function mapping (only for XL-density devices) */
+#define GPIO_Remap_TIM11 ((uint32_t)0x80000080) /*!< TIM11 Alternate Function mapping (only for XL-density devices) */
+#define GPIO_Remap_TIM13 ((uint32_t)0x80000100) /*!< TIM13 Alternate Function mapping (only for High density Value line and XL-density devices) */
+#define GPIO_Remap_TIM14 ((uint32_t)0x80000200) /*!< TIM14 Alternate Function mapping (only for High density Value line and XL-density devices) */
+#define GPIO_Remap_FSMC_NADV ((uint32_t)0x80000400) /*!< FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices) */
+
+#define GPIO_Remap_TIM67_DAC_DMA ((uint32_t)0x80000800) /*!< TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices) */
+#define GPIO_Remap_TIM12 ((uint32_t)0x80001000) /*!< TIM12 Alternate Function mapping (only for High density Value line devices) */
+#define GPIO_Remap_MISC ((uint32_t)0x80002000) /*!< Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping,
+ only for High density Value line devices) */
+
+#define IS_GPIO_REMAP(REMAP) (((REMAP) == GPIO_Remap_SPI1) || ((REMAP) == GPIO_Remap_I2C1) || \
+ ((REMAP) == GPIO_Remap_USART1) || ((REMAP) == GPIO_Remap_USART2) || \
+ ((REMAP) == GPIO_PartialRemap_USART3) || ((REMAP) == GPIO_FullRemap_USART3) || \
+ ((REMAP) == GPIO_PartialRemap_TIM1) || ((REMAP) == GPIO_FullRemap_TIM1) || \
+ ((REMAP) == GPIO_PartialRemap1_TIM2) || ((REMAP) == GPIO_PartialRemap2_TIM2) || \
+ ((REMAP) == GPIO_FullRemap_TIM2) || ((REMAP) == GPIO_PartialRemap_TIM3) || \
+ ((REMAP) == GPIO_FullRemap_TIM3) || ((REMAP) == GPIO_Remap_TIM4) || \
+ ((REMAP) == GPIO_Remap1_CAN1) || ((REMAP) == GPIO_Remap2_CAN1) || \
+ ((REMAP) == GPIO_Remap_PD01) || ((REMAP) == GPIO_Remap_TIM5CH4_LSI) || \
+ ((REMAP) == GPIO_Remap_ADC1_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC1_ETRGREG) || \
+ ((REMAP) == GPIO_Remap_ADC2_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC2_ETRGREG) || \
+ ((REMAP) == GPIO_Remap_ETH) ||((REMAP) == GPIO_Remap_CAN2) || \
+ ((REMAP) == GPIO_Remap_SWJ_NoJTRST) || ((REMAP) == GPIO_Remap_SWJ_JTAGDisable) || \
+ ((REMAP) == GPIO_Remap_SWJ_Disable)|| ((REMAP) == GPIO_Remap_SPI3) || \
+ ((REMAP) == GPIO_Remap_TIM2ITR1_PTP_SOF) || ((REMAP) == GPIO_Remap_PTP_PPS) || \
+ ((REMAP) == GPIO_Remap_TIM15) || ((REMAP) == GPIO_Remap_TIM16) || \
+ ((REMAP) == GPIO_Remap_TIM17) || ((REMAP) == GPIO_Remap_CEC) || \
+ ((REMAP) == GPIO_Remap_TIM1_DMA) || ((REMAP) == GPIO_Remap_TIM9) || \
+ ((REMAP) == GPIO_Remap_TIM10) || ((REMAP) == GPIO_Remap_TIM11) || \
+ ((REMAP) == GPIO_Remap_TIM13) || ((REMAP) == GPIO_Remap_TIM14) || \
+ ((REMAP) == GPIO_Remap_FSMC_NADV) || ((REMAP) == GPIO_Remap_TIM67_DAC_DMA) || \
+ ((REMAP) == GPIO_Remap_TIM12) || ((REMAP) == GPIO_Remap_MISC))
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Port_Sources
+ * @{
+ */
+
+#define GPIO_PortSourceGPIOA ((uint8_t)0x00)
+#define GPIO_PortSourceGPIOB ((uint8_t)0x01)
+#define GPIO_PortSourceGPIOC ((uint8_t)0x02)
+#define GPIO_PortSourceGPIOD ((uint8_t)0x03)
+#define GPIO_PortSourceGPIOE ((uint8_t)0x04)
+#define GPIO_PortSourceGPIOF ((uint8_t)0x05)
+#define GPIO_PortSourceGPIOG ((uint8_t)0x06)
+#define IS_GPIO_EVENTOUT_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOE))
+
+#define IS_GPIO_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOE) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOF) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOG))
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Pin_sources
+ * @{
+ */
+
+#define GPIO_PinSource0 ((uint8_t)0x00)
+#define GPIO_PinSource1 ((uint8_t)0x01)
+#define GPIO_PinSource2 ((uint8_t)0x02)
+#define GPIO_PinSource3 ((uint8_t)0x03)
+#define GPIO_PinSource4 ((uint8_t)0x04)
+#define GPIO_PinSource5 ((uint8_t)0x05)
+#define GPIO_PinSource6 ((uint8_t)0x06)
+#define GPIO_PinSource7 ((uint8_t)0x07)
+#define GPIO_PinSource8 ((uint8_t)0x08)
+#define GPIO_PinSource9 ((uint8_t)0x09)
+#define GPIO_PinSource10 ((uint8_t)0x0A)
+#define GPIO_PinSource11 ((uint8_t)0x0B)
+#define GPIO_PinSource12 ((uint8_t)0x0C)
+#define GPIO_PinSource13 ((uint8_t)0x0D)
+#define GPIO_PinSource14 ((uint8_t)0x0E)
+#define GPIO_PinSource15 ((uint8_t)0x0F)
+
+#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \
+ ((PINSOURCE) == GPIO_PinSource1) || \
+ ((PINSOURCE) == GPIO_PinSource2) || \
+ ((PINSOURCE) == GPIO_PinSource3) || \
+ ((PINSOURCE) == GPIO_PinSource4) || \
+ ((PINSOURCE) == GPIO_PinSource5) || \
+ ((PINSOURCE) == GPIO_PinSource6) || \
+ ((PINSOURCE) == GPIO_PinSource7) || \
+ ((PINSOURCE) == GPIO_PinSource8) || \
+ ((PINSOURCE) == GPIO_PinSource9) || \
+ ((PINSOURCE) == GPIO_PinSource10) || \
+ ((PINSOURCE) == GPIO_PinSource11) || \
+ ((PINSOURCE) == GPIO_PinSource12) || \
+ ((PINSOURCE) == GPIO_PinSource13) || \
+ ((PINSOURCE) == GPIO_PinSource14) || \
+ ((PINSOURCE) == GPIO_PinSource15))
+
+/**
+ * @}
+ */
+
+/** @defgroup Ethernet_Media_Interface
+ * @{
+ */
+#define GPIO_ETH_MediaInterface_MII ((u32)0x00000000)
+#define GPIO_ETH_MediaInterface_RMII ((u32)0x00000001)
+
+#define IS_GPIO_ETH_MEDIA_INTERFACE(INTERFACE) (((INTERFACE) == GPIO_ETH_MediaInterface_MII) || \
+ ((INTERFACE) == GPIO_ETH_MediaInterface_RMII))
+
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Exported_Functions
+ * @{
+ */
+
+void GPIO_DeInit(GPIO_TypeDef* GPIOx);
+void GPIO_AFIODeInit(void);
+void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
+void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct);
+uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx);
+uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx);
+void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal);
+void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal);
+void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource);
+void GPIO_EventOutputCmd(FunctionalState NewState);
+void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState);
+void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource);
+void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_GPIO_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_i2c.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_i2c.h
new file mode 100644
index 00000000..2d42e5ce
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_i2c.h
@@ -0,0 +1,684 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_i2c.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the I2C firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_I2C_H
+#define __STM32F10x_I2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup I2C
+ * @{
+ */
+
+/** @defgroup I2C_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief I2C Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t I2C_ClockSpeed; /*!< Specifies the clock frequency.
+ This parameter must be set to a value lower than 400kHz */
+
+ uint16_t I2C_Mode; /*!< Specifies the I2C mode.
+ This parameter can be a value of @ref I2C_mode */
+
+ uint16_t I2C_DutyCycle; /*!< Specifies the I2C fast mode duty cycle.
+ This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */
+
+ uint16_t I2C_OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint16_t I2C_Ack; /*!< Enables or disables the acknowledgement.
+ This parameter can be a value of @ref I2C_acknowledgement */
+
+ uint16_t I2C_AcknowledgedAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged.
+ This parameter can be a value of @ref I2C_acknowledged_address */
+}I2C_InitTypeDef;
+
+/**
+ * @}
+ */
+
+
+/** @defgroup I2C_Exported_Constants
+ * @{
+ */
+
+#define IS_I2C_ALL_PERIPH(PERIPH) (((PERIPH) == I2C1) || \
+ ((PERIPH) == I2C2))
+/** @defgroup I2C_mode
+ * @{
+ */
+
+#define I2C_Mode_I2C ((uint16_t)0x0000)
+#define I2C_Mode_SMBusDevice ((uint16_t)0x0002)
+#define I2C_Mode_SMBusHost ((uint16_t)0x000A)
+#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \
+ ((MODE) == I2C_Mode_SMBusDevice) || \
+ ((MODE) == I2C_Mode_SMBusHost))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_duty_cycle_in_fast_mode
+ * @{
+ */
+
+#define I2C_DutyCycle_16_9 ((uint16_t)0x4000) /*!< I2C fast mode Tlow/Thigh = 16/9 */
+#define I2C_DutyCycle_2 ((uint16_t)0xBFFF) /*!< I2C fast mode Tlow/Thigh = 2 */
+#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DutyCycle_16_9) || \
+ ((CYCLE) == I2C_DutyCycle_2))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_acknowledgement
+ * @{
+ */
+
+#define I2C_Ack_Enable ((uint16_t)0x0400)
+#define I2C_Ack_Disable ((uint16_t)0x0000)
+#define IS_I2C_ACK_STATE(STATE) (((STATE) == I2C_Ack_Enable) || \
+ ((STATE) == I2C_Ack_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_transfer_direction
+ * @{
+ */
+
+#define I2C_Direction_Transmitter ((uint8_t)0x00)
+#define I2C_Direction_Receiver ((uint8_t)0x01)
+#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \
+ ((DIRECTION) == I2C_Direction_Receiver))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_acknowledged_address
+ * @{
+ */
+
+#define I2C_AcknowledgedAddress_7bit ((uint16_t)0x4000)
+#define I2C_AcknowledgedAddress_10bit ((uint16_t)0xC000)
+#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \
+ ((ADDRESS) == I2C_AcknowledgedAddress_10bit))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_registers
+ * @{
+ */
+
+#define I2C_Register_CR1 ((uint8_t)0x00)
+#define I2C_Register_CR2 ((uint8_t)0x04)
+#define I2C_Register_OAR1 ((uint8_t)0x08)
+#define I2C_Register_OAR2 ((uint8_t)0x0C)
+#define I2C_Register_DR ((uint8_t)0x10)
+#define I2C_Register_SR1 ((uint8_t)0x14)
+#define I2C_Register_SR2 ((uint8_t)0x18)
+#define I2C_Register_CCR ((uint8_t)0x1C)
+#define I2C_Register_TRISE ((uint8_t)0x20)
+#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \
+ ((REGISTER) == I2C_Register_CR2) || \
+ ((REGISTER) == I2C_Register_OAR1) || \
+ ((REGISTER) == I2C_Register_OAR2) || \
+ ((REGISTER) == I2C_Register_DR) || \
+ ((REGISTER) == I2C_Register_SR1) || \
+ ((REGISTER) == I2C_Register_SR2) || \
+ ((REGISTER) == I2C_Register_CCR) || \
+ ((REGISTER) == I2C_Register_TRISE))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_SMBus_alert_pin_level
+ * @{
+ */
+
+#define I2C_SMBusAlert_Low ((uint16_t)0x2000)
+#define I2C_SMBusAlert_High ((uint16_t)0xDFFF)
+#define IS_I2C_SMBUS_ALERT(ALERT) (((ALERT) == I2C_SMBusAlert_Low) || \
+ ((ALERT) == I2C_SMBusAlert_High))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_PEC_position
+ * @{
+ */
+
+#define I2C_PECPosition_Next ((uint16_t)0x0800)
+#define I2C_PECPosition_Current ((uint16_t)0xF7FF)
+#define IS_I2C_PEC_POSITION(POSITION) (((POSITION) == I2C_PECPosition_Next) || \
+ ((POSITION) == I2C_PECPosition_Current))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_NCAK_position
+ * @{
+ */
+
+#define I2C_NACKPosition_Next ((uint16_t)0x0800)
+#define I2C_NACKPosition_Current ((uint16_t)0xF7FF)
+#define IS_I2C_NACK_POSITION(POSITION) (((POSITION) == I2C_NACKPosition_Next) || \
+ ((POSITION) == I2C_NACKPosition_Current))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_interrupts_definition
+ * @{
+ */
+
+#define I2C_IT_BUF ((uint16_t)0x0400)
+#define I2C_IT_EVT ((uint16_t)0x0200)
+#define I2C_IT_ERR ((uint16_t)0x0100)
+#define IS_I2C_CONFIG_IT(IT) ((((IT) & (uint16_t)0xF8FF) == 0x00) && ((IT) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_interrupts_definition
+ * @{
+ */
+
+#define I2C_IT_SMBALERT ((uint32_t)0x01008000)
+#define I2C_IT_TIMEOUT ((uint32_t)0x01004000)
+#define I2C_IT_PECERR ((uint32_t)0x01001000)
+#define I2C_IT_OVR ((uint32_t)0x01000800)
+#define I2C_IT_AF ((uint32_t)0x01000400)
+#define I2C_IT_ARLO ((uint32_t)0x01000200)
+#define I2C_IT_BERR ((uint32_t)0x01000100)
+#define I2C_IT_TXE ((uint32_t)0x06000080)
+#define I2C_IT_RXNE ((uint32_t)0x06000040)
+#define I2C_IT_STOPF ((uint32_t)0x02000010)
+#define I2C_IT_ADD10 ((uint32_t)0x02000008)
+#define I2C_IT_BTF ((uint32_t)0x02000004)
+#define I2C_IT_ADDR ((uint32_t)0x02000002)
+#define I2C_IT_SB ((uint32_t)0x02000001)
+
+#define IS_I2C_CLEAR_IT(IT) ((((IT) & (uint16_t)0x20FF) == 0x00) && ((IT) != (uint16_t)0x00))
+
+#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \
+ ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \
+ ((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \
+ ((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_TXE) || \
+ ((IT) == I2C_IT_RXNE) || ((IT) == I2C_IT_STOPF) || \
+ ((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \
+ ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_flags_definition
+ * @{
+ */
+
+/**
+ * @brief SR2 register flags
+ */
+
+#define I2C_FLAG_DUALF ((uint32_t)0x00800000)
+#define I2C_FLAG_SMBHOST ((uint32_t)0x00400000)
+#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00200000)
+#define I2C_FLAG_GENCALL ((uint32_t)0x00100000)
+#define I2C_FLAG_TRA ((uint32_t)0x00040000)
+#define I2C_FLAG_BUSY ((uint32_t)0x00020000)
+#define I2C_FLAG_MSL ((uint32_t)0x00010000)
+
+/**
+ * @brief SR1 register flags
+ */
+
+#define I2C_FLAG_SMBALERT ((uint32_t)0x10008000)
+#define I2C_FLAG_TIMEOUT ((uint32_t)0x10004000)
+#define I2C_FLAG_PECERR ((uint32_t)0x10001000)
+#define I2C_FLAG_OVR ((uint32_t)0x10000800)
+#define I2C_FLAG_AF ((uint32_t)0x10000400)
+#define I2C_FLAG_ARLO ((uint32_t)0x10000200)
+#define I2C_FLAG_BERR ((uint32_t)0x10000100)
+#define I2C_FLAG_TXE ((uint32_t)0x10000080)
+#define I2C_FLAG_RXNE ((uint32_t)0x10000040)
+#define I2C_FLAG_STOPF ((uint32_t)0x10000010)
+#define I2C_FLAG_ADD10 ((uint32_t)0x10000008)
+#define I2C_FLAG_BTF ((uint32_t)0x10000004)
+#define I2C_FLAG_ADDR ((uint32_t)0x10000002)
+#define I2C_FLAG_SB ((uint32_t)0x10000001)
+
+#define IS_I2C_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0x20FF) == 0x00) && ((FLAG) != (uint16_t)0x00))
+
+#define IS_I2C_GET_FLAG(FLAG) (((FLAG) == I2C_FLAG_DUALF) || ((FLAG) == I2C_FLAG_SMBHOST) || \
+ ((FLAG) == I2C_FLAG_SMBDEFAULT) || ((FLAG) == I2C_FLAG_GENCALL) || \
+ ((FLAG) == I2C_FLAG_TRA) || ((FLAG) == I2C_FLAG_BUSY) || \
+ ((FLAG) == I2C_FLAG_MSL) || ((FLAG) == I2C_FLAG_SMBALERT) || \
+ ((FLAG) == I2C_FLAG_TIMEOUT) || ((FLAG) == I2C_FLAG_PECERR) || \
+ ((FLAG) == I2C_FLAG_OVR) || ((FLAG) == I2C_FLAG_AF) || \
+ ((FLAG) == I2C_FLAG_ARLO) || ((FLAG) == I2C_FLAG_BERR) || \
+ ((FLAG) == I2C_FLAG_TXE) || ((FLAG) == I2C_FLAG_RXNE) || \
+ ((FLAG) == I2C_FLAG_STOPF) || ((FLAG) == I2C_FLAG_ADD10) || \
+ ((FLAG) == I2C_FLAG_BTF) || ((FLAG) == I2C_FLAG_ADDR) || \
+ ((FLAG) == I2C_FLAG_SB))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Events
+ * @{
+ */
+
+/*========================================
+
+ I2C Master Events (Events grouped in order of communication)
+ ==========================================*/
+/**
+ * @brief Communication start
+ *
+ * After sending the START condition (I2C_GenerateSTART() function) the master
+ * has to wait for this event. It means that the Start condition has been correctly
+ * released on the I2C bus (the bus is free, no other devices is communicating).
+ *
+ */
+/* --EV5 */
+#define I2C_EVENT_MASTER_MODE_SELECT ((uint32_t)0x00030001) /* BUSY, MSL and SB flag */
+
+/**
+ * @brief Address Acknowledge
+ *
+ * After checking on EV5 (start condition correctly released on the bus), the
+ * master sends the address of the slave(s) with which it will communicate
+ * (I2C_Send7bitAddress() function, it also determines the direction of the communication:
+ * Master transmitter or Receiver). Then the master has to wait that a slave acknowledges
+ * his address. If an acknowledge is sent on the bus, one of the following events will
+ * be set:
+ *
+ * 1) In case of Master Receiver (7-bit addressing): the I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED
+ * event is set.
+ *
+ * 2) In case of Master Transmitter (7-bit addressing): the I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED
+ * is set
+ *
+ * 3) In case of 10-Bit addressing mode, the master (just after generating the START
+ * and checking on EV5) has to send the header of 10-bit addressing mode (I2C_SendData()
+ * function). Then master should wait on EV9. It means that the 10-bit addressing
+ * header has been correctly sent on the bus. Then master should send the second part of
+ * the 10-bit address (LSB) using the function I2C_Send7bitAddress(). Then master
+ * should wait for event EV6.
+ *
+ */
+
+/* --EV6 */
+#define I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED ((uint32_t)0x00070082) /* BUSY, MSL, ADDR, TXE and TRA flags */
+#define I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED ((uint32_t)0x00030002) /* BUSY, MSL and ADDR flags */
+/* --EV9 */
+#define I2C_EVENT_MASTER_MODE_ADDRESS10 ((uint32_t)0x00030008) /* BUSY, MSL and ADD10 flags */
+
+/**
+ * @brief Communication events
+ *
+ * If a communication is established (START condition generated and slave address
+ * acknowledged) then the master has to check on one of the following events for
+ * communication procedures:
+ *
+ * 1) Master Receiver mode: The master has to wait on the event EV7 then to read
+ * the data received from the slave (I2C_ReceiveData() function).
+ *
+ * 2) Master Transmitter mode: The master has to send data (I2C_SendData()
+ * function) then to wait on event EV8 or EV8_2.
+ * These two events are similar:
+ * - EV8 means that the data has been written in the data register and is
+ * being shifted out.
+ * - EV8_2 means that the data has been physically shifted out and output
+ * on the bus.
+ * In most cases, using EV8 is sufficient for the application.
+ * Using EV8_2 leads to a slower communication but ensure more reliable test.
+ * EV8_2 is also more suitable than EV8 for testing on the last data transmission
+ * (before Stop condition generation).
+ *
+ * @note In case the user software does not guarantee that this event EV7 is
+ * managed before the current byte end of transfer, then user may check on EV7
+ * and BTF flag at the same time (ie. (I2C_EVENT_MASTER_BYTE_RECEIVED | I2C_FLAG_BTF)).
+ * In this case the communication may be slower.
+ *
+ */
+
+/* Master RECEIVER mode -----------------------------*/
+/* --EV7 */
+#define I2C_EVENT_MASTER_BYTE_RECEIVED ((uint32_t)0x00030040) /* BUSY, MSL and RXNE flags */
+
+/* Master TRANSMITTER mode --------------------------*/
+/* --EV8 */
+#define I2C_EVENT_MASTER_BYTE_TRANSMITTING ((uint32_t)0x00070080) /* TRA, BUSY, MSL, TXE flags */
+/* --EV8_2 */
+#define I2C_EVENT_MASTER_BYTE_TRANSMITTED ((uint32_t)0x00070084) /* TRA, BUSY, MSL, TXE and BTF flags */
+
+
+/*========================================
+
+ I2C Slave Events (Events grouped in order of communication)
+ ==========================================*/
+
+/**
+ * @brief Communication start events
+ *
+ * Wait on one of these events at the start of the communication. It means that
+ * the I2C peripheral detected a Start condition on the bus (generated by master
+ * device) followed by the peripheral address. The peripheral generates an ACK
+ * condition on the bus (if the acknowledge feature is enabled through function
+ * I2C_AcknowledgeConfig()) and the events listed above are set :
+ *
+ * 1) In normal case (only one address managed by the slave), when the address
+ * sent by the master matches the own address of the peripheral (configured by
+ * I2C_OwnAddress1 field) the I2C_EVENT_SLAVE_XXX_ADDRESS_MATCHED event is set
+ * (where XXX could be TRANSMITTER or RECEIVER).
+ *
+ * 2) In case the address sent by the master matches the second address of the
+ * peripheral (configured by the function I2C_OwnAddress2Config() and enabled
+ * by the function I2C_DualAddressCmd()) the events I2C_EVENT_SLAVE_XXX_SECONDADDRESS_MATCHED
+ * (where XXX could be TRANSMITTER or RECEIVER) are set.
+ *
+ * 3) In case the address sent by the master is General Call (address 0x00) and
+ * if the General Call is enabled for the peripheral (using function I2C_GeneralCallCmd())
+ * the following event is set I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED.
+ *
+ */
+
+/* --EV1 (all the events below are variants of EV1) */
+/* 1) Case of One Single Address managed by the slave */
+#define I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED ((uint32_t)0x00020002) /* BUSY and ADDR flags */
+#define I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED ((uint32_t)0x00060082) /* TRA, BUSY, TXE and ADDR flags */
+
+/* 2) Case of Dual address managed by the slave */
+#define I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED ((uint32_t)0x00820000) /* DUALF and BUSY flags */
+#define I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((uint32_t)0x00860080) /* DUALF, TRA, BUSY and TXE flags */
+
+/* 3) Case of General Call enabled for the slave */
+#define I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED ((uint32_t)0x00120000) /* GENCALL and BUSY flags */
+
+/**
+ * @brief Communication events
+ *
+ * Wait on one of these events when EV1 has already been checked and:
+ *
+ * - Slave RECEIVER mode:
+ * - EV2: When the application is expecting a data byte to be received.
+ * - EV4: When the application is expecting the end of the communication: master
+ * sends a stop condition and data transmission is stopped.
+ *
+ * - Slave Transmitter mode:
+ * - EV3: When a byte has been transmitted by the slave and the application is expecting
+ * the end of the byte transmission. The two events I2C_EVENT_SLAVE_BYTE_TRANSMITTED and
+ * I2C_EVENT_SLAVE_BYTE_TRANSMITTING are similar. The second one can optionally be
+ * used when the user software doesn't guarantee the EV3 is managed before the
+ * current byte end of transfer.
+ * - EV3_2: When the master sends a NACK in order to tell slave that data transmission
+ * shall end (before sending the STOP condition). In this case slave has to stop sending
+ * data bytes and expect a Stop condition on the bus.
+ *
+ * @note In case the user software does not guarantee that the event EV2 is
+ * managed before the current byte end of transfer, then user may check on EV2
+ * and BTF flag at the same time (ie. (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_BTF)).
+ * In this case the communication may be slower.
+ *
+ */
+
+/* Slave RECEIVER mode --------------------------*/
+/* --EV2 */
+#define I2C_EVENT_SLAVE_BYTE_RECEIVED ((uint32_t)0x00020040) /* BUSY and RXNE flags */
+/* --EV4 */
+#define I2C_EVENT_SLAVE_STOP_DETECTED ((uint32_t)0x00000010) /* STOPF flag */
+
+/* Slave TRANSMITTER mode -----------------------*/
+/* --EV3 */
+#define I2C_EVENT_SLAVE_BYTE_TRANSMITTED ((uint32_t)0x00060084) /* TRA, BUSY, TXE and BTF flags */
+#define I2C_EVENT_SLAVE_BYTE_TRANSMITTING ((uint32_t)0x00060080) /* TRA, BUSY and TXE flags */
+/* --EV3_2 */
+#define I2C_EVENT_SLAVE_ACK_FAILURE ((uint32_t)0x00000400) /* AF flag */
+
+/*=========================== End of Events Description ==========================================*/
+
+#define IS_I2C_EVENT(EVENT) (((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED) || \
+ ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED) || \
+ ((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED) || \
+ ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED) || \
+ ((EVENT) == I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED) || \
+ ((EVENT) == I2C_EVENT_SLAVE_BYTE_RECEIVED) || \
+ ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF)) || \
+ ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL)) || \
+ ((EVENT) == I2C_EVENT_SLAVE_BYTE_TRANSMITTED) || \
+ ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF)) || \
+ ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL)) || \
+ ((EVENT) == I2C_EVENT_SLAVE_STOP_DETECTED) || \
+ ((EVENT) == I2C_EVENT_MASTER_MODE_SELECT) || \
+ ((EVENT) == I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED) || \
+ ((EVENT) == I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED) || \
+ ((EVENT) == I2C_EVENT_MASTER_BYTE_RECEIVED) || \
+ ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTED) || \
+ ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTING) || \
+ ((EVENT) == I2C_EVENT_MASTER_MODE_ADDRESS10) || \
+ ((EVENT) == I2C_EVENT_SLAVE_ACK_FAILURE))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_own_address1
+ * @{
+ */
+
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x3FF)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_clock_speed
+ * @{
+ */
+
+#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) >= 0x1) && ((SPEED) <= 400000))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Functions
+ * @{
+ */
+
+void I2C_DeInit(I2C_TypeDef* I2Cx);
+void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct);
+void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct);
+void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address);
+void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState);
+void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data);
+uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx);
+void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction);
+uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register);
+void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition);
+void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert);
+void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition);
+void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState);
+uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx);
+void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle);
+
+/**
+ * @brief
+ ****************************************************************************************
+ *
+ * I2C State Monitoring Functions
+ *
+ ****************************************************************************************
+ * This I2C driver provides three different ways for I2C state monitoring
+ * depending on the application requirements and constraints:
+ *
+ *
+ * 1) Basic state monitoring:
+ * Using I2C_CheckEvent() function:
+ * It compares the status registers (SR1 and SR2) content to a given event
+ * (can be the combination of one or more flags).
+ * It returns SUCCESS if the current status includes the given flags
+ * and returns ERROR if one or more flags are missing in the current status.
+ * - When to use:
+ * - This function is suitable for most applications as well as for startup
+ * activity since the events are fully described in the product reference manual
+ * (RM0008).
+ * - It is also suitable for users who need to define their own events.
+ * - Limitations:
+ * - If an error occurs (ie. error flags are set besides to the monitored flags),
+ * the I2C_CheckEvent() function may return SUCCESS despite the communication
+ * hold or corrupted real state.
+ * In this case, it is advised to use error interrupts to monitor the error
+ * events and handle them in the interrupt IRQ handler.
+ *
+ * @note
+ * For error management, it is advised to use the following functions:
+ * - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR).
+ * - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs.
+ * Where x is the peripheral instance (I2C1, I2C2 ...)
+ * - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler()
+ * in order to determine which error occurred.
+ * - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd()
+ * and/or I2C_GenerateStop() in order to clear the error flag and source,
+ * and return to correct communication status.
+ *
+ *
+ * 2) Advanced state monitoring:
+ * Using the function I2C_GetLastEvent() which returns the image of both status
+ * registers in a single word (uint32_t) (Status Register 2 value is shifted left
+ * by 16 bits and concatenated to Status Register 1).
+ * - When to use:
+ * - This function is suitable for the same applications above but it allows to
+ * overcome the limitations of I2C_GetFlagStatus() function (see below).
+ * The returned value could be compared to events already defined in the
+ * library (stm32f10x_i2c.h) or to custom values defined by user.
+ * - This function is suitable when multiple flags are monitored at the same time.
+ * - At the opposite of I2C_CheckEvent() function, this function allows user to
+ * choose when an event is accepted (when all events flags are set and no
+ * other flags are set or just when the needed flags are set like
+ * I2C_CheckEvent() function).
+ * - Limitations:
+ * - User may need to define his own events.
+ * - Same remark concerning the error management is applicable for this
+ * function if user decides to check only regular communication flags (and
+ * ignores error flags).
+ *
+ *
+ * 3) Flag-based state monitoring:
+ * Using the function I2C_GetFlagStatus() which simply returns the status of
+ * one single flag (ie. I2C_FLAG_RXNE ...).
+ * - When to use:
+ * - This function could be used for specific applications or in debug phase.
+ * - It is suitable when only one flag checking is needed (most I2C events
+ * are monitored through multiple flags).
+ * - Limitations:
+ * - When calling this function, the Status register is accessed. Some flags are
+ * cleared when the status register is accessed. So checking the status
+ * of one Flag, may clear other ones.
+ * - Function may need to be called twice or more in order to monitor one
+ * single event.
+ *
+ */
+
+/**
+ *
+ * 1) Basic state monitoring
+ *******************************************************************************
+ */
+ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT);
+/**
+ *
+ * 2) Advanced state monitoring
+ *******************************************************************************
+ */
+uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx);
+/**
+ *
+ * 3) Flag-based state monitoring
+ *******************************************************************************
+ */
+FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG);
+/**
+ *
+ *******************************************************************************
+ */
+
+void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG);
+ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT);
+void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_I2C_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_iwdg.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_iwdg.h
new file mode 100644
index 00000000..7f5ab764
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_iwdg.h
@@ -0,0 +1,140 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_iwdg.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the IWDG
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_IWDG_H
+#define __STM32F10x_IWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup IWDG
+ * @{
+ */
+
+/** @defgroup IWDG_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Exported_Constants
+ * @{
+ */
+
+/** @defgroup IWDG_WriteAccess
+ * @{
+ */
+
+#define IWDG_WriteAccess_Enable ((uint16_t)0x5555)
+#define IWDG_WriteAccess_Disable ((uint16_t)0x0000)
+#define IS_IWDG_WRITE_ACCESS(ACCESS) (((ACCESS) == IWDG_WriteAccess_Enable) || \
+ ((ACCESS) == IWDG_WriteAccess_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_prescaler
+ * @{
+ */
+
+#define IWDG_Prescaler_4 ((uint8_t)0x00)
+#define IWDG_Prescaler_8 ((uint8_t)0x01)
+#define IWDG_Prescaler_16 ((uint8_t)0x02)
+#define IWDG_Prescaler_32 ((uint8_t)0x03)
+#define IWDG_Prescaler_64 ((uint8_t)0x04)
+#define IWDG_Prescaler_128 ((uint8_t)0x05)
+#define IWDG_Prescaler_256 ((uint8_t)0x06)
+#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_Prescaler_4) || \
+ ((PRESCALER) == IWDG_Prescaler_8) || \
+ ((PRESCALER) == IWDG_Prescaler_16) || \
+ ((PRESCALER) == IWDG_Prescaler_32) || \
+ ((PRESCALER) == IWDG_Prescaler_64) || \
+ ((PRESCALER) == IWDG_Prescaler_128)|| \
+ ((PRESCALER) == IWDG_Prescaler_256))
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Flag
+ * @{
+ */
+
+#define IWDG_FLAG_PVU ((uint16_t)0x0001)
+#define IWDG_FLAG_RVU ((uint16_t)0x0002)
+#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || ((FLAG) == IWDG_FLAG_RVU))
+#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Exported_Functions
+ * @{
+ */
+
+void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess);
+void IWDG_SetPrescaler(uint8_t IWDG_Prescaler);
+void IWDG_SetReload(uint16_t Reload);
+void IWDG_ReloadCounter(void);
+void IWDG_Enable(void);
+FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_IWDG_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_pwr.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_pwr.h
new file mode 100644
index 00000000..76e6ce91
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_pwr.h
@@ -0,0 +1,156 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_pwr.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the PWR firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_PWR_H
+#define __STM32F10x_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup PWR
+ * @{
+ */
+
+/** @defgroup PWR_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Exported_Constants
+ * @{
+ */
+
+/** @defgroup PVD_detection_level
+ * @{
+ */
+
+#define PWR_PVDLevel_2V2 ((uint32_t)0x00000000)
+#define PWR_PVDLevel_2V3 ((uint32_t)0x00000020)
+#define PWR_PVDLevel_2V4 ((uint32_t)0x00000040)
+#define PWR_PVDLevel_2V5 ((uint32_t)0x00000060)
+#define PWR_PVDLevel_2V6 ((uint32_t)0x00000080)
+#define PWR_PVDLevel_2V7 ((uint32_t)0x000000A0)
+#define PWR_PVDLevel_2V8 ((uint32_t)0x000000C0)
+#define PWR_PVDLevel_2V9 ((uint32_t)0x000000E0)
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_2V2) || ((LEVEL) == PWR_PVDLevel_2V3)|| \
+ ((LEVEL) == PWR_PVDLevel_2V4) || ((LEVEL) == PWR_PVDLevel_2V5)|| \
+ ((LEVEL) == PWR_PVDLevel_2V6) || ((LEVEL) == PWR_PVDLevel_2V7)|| \
+ ((LEVEL) == PWR_PVDLevel_2V8) || ((LEVEL) == PWR_PVDLevel_2V9))
+/**
+ * @}
+ */
+
+/** @defgroup Regulator_state_is_STOP_mode
+ * @{
+ */
+
+#define PWR_Regulator_ON ((uint32_t)0x00000000)
+#define PWR_Regulator_LowPower ((uint32_t)0x00000001)
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \
+ ((REGULATOR) == PWR_Regulator_LowPower))
+/**
+ * @}
+ */
+
+/** @defgroup STOP_mode_entry
+ * @{
+ */
+
+#define PWR_STOPEntry_WFI ((uint8_t)0x01)
+#define PWR_STOPEntry_WFE ((uint8_t)0x02)
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE))
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Flag
+ * @{
+ */
+
+#define PWR_FLAG_WU ((uint32_t)0x00000001)
+#define PWR_FLAG_SB ((uint32_t)0x00000002)
+#define PWR_FLAG_PVDO ((uint32_t)0x00000004)
+#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
+ ((FLAG) == PWR_FLAG_PVDO))
+
+#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Exported_Functions
+ * @{
+ */
+
+void PWR_DeInit(void);
+void PWR_BackupAccessCmd(FunctionalState NewState);
+void PWR_PVDCmd(FunctionalState NewState);
+void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel);
+void PWR_WakeUpPinCmd(FunctionalState NewState);
+void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry);
+void PWR_EnterSTANDBYMode(void);
+FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG);
+void PWR_ClearFlag(uint32_t PWR_FLAG);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_PWR_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_rcc.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_rcc.h
new file mode 100644
index 00000000..b3b7d821
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_rcc.h
@@ -0,0 +1,727 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_rcc.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the RCC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_RCC_H
+#define __STM32F10x_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/** @defgroup RCC_Exported_Types
+ * @{
+ */
+
+typedef struct
+{
+ uint32_t SYSCLK_Frequency; /*!< returns SYSCLK clock frequency expressed in Hz */
+ uint32_t HCLK_Frequency; /*!< returns HCLK clock frequency expressed in Hz */
+ uint32_t PCLK1_Frequency; /*!< returns PCLK1 clock frequency expressed in Hz */
+ uint32_t PCLK2_Frequency; /*!< returns PCLK2 clock frequency expressed in Hz */
+ uint32_t ADCCLK_Frequency; /*!< returns ADCCLK clock frequency expressed in Hz */
+}RCC_ClocksTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup HSE_configuration
+ * @{
+ */
+
+#define RCC_HSE_OFF ((uint32_t)0x00000000)
+#define RCC_HSE_ON ((uint32_t)0x00010000)
+#define RCC_HSE_Bypass ((uint32_t)0x00040000)
+#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
+ ((HSE) == RCC_HSE_Bypass))
+
+/**
+ * @}
+ */
+
+/** @defgroup PLL_entry_clock_source
+ * @{
+ */
+
+#define RCC_PLLSource_HSI_Div2 ((uint32_t)0x00000000)
+
+#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_CL)
+ #define RCC_PLLSource_HSE_Div1 ((uint32_t)0x00010000)
+ #define RCC_PLLSource_HSE_Div2 ((uint32_t)0x00030000)
+ #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \
+ ((SOURCE) == RCC_PLLSource_HSE_Div1) || \
+ ((SOURCE) == RCC_PLLSource_HSE_Div2))
+#else
+ #define RCC_PLLSource_PREDIV1 ((uint32_t)0x00010000)
+ #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \
+ ((SOURCE) == RCC_PLLSource_PREDIV1))
+#endif /* STM32F10X_CL */
+
+/**
+ * @}
+ */
+
+/** @defgroup PLL_multiplication_factor
+ * @{
+ */
+#ifndef STM32F10X_CL
+ #define RCC_PLLMul_2 ((uint32_t)0x00000000)
+ #define RCC_PLLMul_3 ((uint32_t)0x00040000)
+ #define RCC_PLLMul_4 ((uint32_t)0x00080000)
+ #define RCC_PLLMul_5 ((uint32_t)0x000C0000)
+ #define RCC_PLLMul_6 ((uint32_t)0x00100000)
+ #define RCC_PLLMul_7 ((uint32_t)0x00140000)
+ #define RCC_PLLMul_8 ((uint32_t)0x00180000)
+ #define RCC_PLLMul_9 ((uint32_t)0x001C0000)
+ #define RCC_PLLMul_10 ((uint32_t)0x00200000)
+ #define RCC_PLLMul_11 ((uint32_t)0x00240000)
+ #define RCC_PLLMul_12 ((uint32_t)0x00280000)
+ #define RCC_PLLMul_13 ((uint32_t)0x002C0000)
+ #define RCC_PLLMul_14 ((uint32_t)0x00300000)
+ #define RCC_PLLMul_15 ((uint32_t)0x00340000)
+ #define RCC_PLLMul_16 ((uint32_t)0x00380000)
+ #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_2) || ((MUL) == RCC_PLLMul_3) || \
+ ((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \
+ ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \
+ ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \
+ ((MUL) == RCC_PLLMul_10) || ((MUL) == RCC_PLLMul_11) || \
+ ((MUL) == RCC_PLLMul_12) || ((MUL) == RCC_PLLMul_13) || \
+ ((MUL) == RCC_PLLMul_14) || ((MUL) == RCC_PLLMul_15) || \
+ ((MUL) == RCC_PLLMul_16))
+
+#else
+ #define RCC_PLLMul_4 ((uint32_t)0x00080000)
+ #define RCC_PLLMul_5 ((uint32_t)0x000C0000)
+ #define RCC_PLLMul_6 ((uint32_t)0x00100000)
+ #define RCC_PLLMul_7 ((uint32_t)0x00140000)
+ #define RCC_PLLMul_8 ((uint32_t)0x00180000)
+ #define RCC_PLLMul_9 ((uint32_t)0x001C0000)
+ #define RCC_PLLMul_6_5 ((uint32_t)0x00340000)
+
+ #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \
+ ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \
+ ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \
+ ((MUL) == RCC_PLLMul_6_5))
+#endif /* STM32F10X_CL */
+/**
+ * @}
+ */
+
+/** @defgroup PREDIV1_division_factor
+ * @{
+ */
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+ #define RCC_PREDIV1_Div1 ((uint32_t)0x00000000)
+ #define RCC_PREDIV1_Div2 ((uint32_t)0x00000001)
+ #define RCC_PREDIV1_Div3 ((uint32_t)0x00000002)
+ #define RCC_PREDIV1_Div4 ((uint32_t)0x00000003)
+ #define RCC_PREDIV1_Div5 ((uint32_t)0x00000004)
+ #define RCC_PREDIV1_Div6 ((uint32_t)0x00000005)
+ #define RCC_PREDIV1_Div7 ((uint32_t)0x00000006)
+ #define RCC_PREDIV1_Div8 ((uint32_t)0x00000007)
+ #define RCC_PREDIV1_Div9 ((uint32_t)0x00000008)
+ #define RCC_PREDIV1_Div10 ((uint32_t)0x00000009)
+ #define RCC_PREDIV1_Div11 ((uint32_t)0x0000000A)
+ #define RCC_PREDIV1_Div12 ((uint32_t)0x0000000B)
+ #define RCC_PREDIV1_Div13 ((uint32_t)0x0000000C)
+ #define RCC_PREDIV1_Div14 ((uint32_t)0x0000000D)
+ #define RCC_PREDIV1_Div15 ((uint32_t)0x0000000E)
+ #define RCC_PREDIV1_Div16 ((uint32_t)0x0000000F)
+
+ #define IS_RCC_PREDIV1(PREDIV1) (((PREDIV1) == RCC_PREDIV1_Div1) || ((PREDIV1) == RCC_PREDIV1_Div2) || \
+ ((PREDIV1) == RCC_PREDIV1_Div3) || ((PREDIV1) == RCC_PREDIV1_Div4) || \
+ ((PREDIV1) == RCC_PREDIV1_Div5) || ((PREDIV1) == RCC_PREDIV1_Div6) || \
+ ((PREDIV1) == RCC_PREDIV1_Div7) || ((PREDIV1) == RCC_PREDIV1_Div8) || \
+ ((PREDIV1) == RCC_PREDIV1_Div9) || ((PREDIV1) == RCC_PREDIV1_Div10) || \
+ ((PREDIV1) == RCC_PREDIV1_Div11) || ((PREDIV1) == RCC_PREDIV1_Div12) || \
+ ((PREDIV1) == RCC_PREDIV1_Div13) || ((PREDIV1) == RCC_PREDIV1_Div14) || \
+ ((PREDIV1) == RCC_PREDIV1_Div15) || ((PREDIV1) == RCC_PREDIV1_Div16))
+#endif
+/**
+ * @}
+ */
+
+
+/** @defgroup PREDIV1_clock_source
+ * @{
+ */
+#ifdef STM32F10X_CL
+/* PREDIV1 clock source (for STM32 connectivity line devices) */
+ #define RCC_PREDIV1_Source_HSE ((uint32_t)0x00000000)
+ #define RCC_PREDIV1_Source_PLL2 ((uint32_t)0x00010000)
+
+ #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE) || \
+ ((SOURCE) == RCC_PREDIV1_Source_PLL2))
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/* PREDIV1 clock source (for STM32 Value line devices) */
+ #define RCC_PREDIV1_Source_HSE ((uint32_t)0x00000000)
+
+ #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE))
+#endif
+/**
+ * @}
+ */
+
+#ifdef STM32F10X_CL
+/** @defgroup PREDIV2_division_factor
+ * @{
+ */
+
+ #define RCC_PREDIV2_Div1 ((uint32_t)0x00000000)
+ #define RCC_PREDIV2_Div2 ((uint32_t)0x00000010)
+ #define RCC_PREDIV2_Div3 ((uint32_t)0x00000020)
+ #define RCC_PREDIV2_Div4 ((uint32_t)0x00000030)
+ #define RCC_PREDIV2_Div5 ((uint32_t)0x00000040)
+ #define RCC_PREDIV2_Div6 ((uint32_t)0x00000050)
+ #define RCC_PREDIV2_Div7 ((uint32_t)0x00000060)
+ #define RCC_PREDIV2_Div8 ((uint32_t)0x00000070)
+ #define RCC_PREDIV2_Div9 ((uint32_t)0x00000080)
+ #define RCC_PREDIV2_Div10 ((uint32_t)0x00000090)
+ #define RCC_PREDIV2_Div11 ((uint32_t)0x000000A0)
+ #define RCC_PREDIV2_Div12 ((uint32_t)0x000000B0)
+ #define RCC_PREDIV2_Div13 ((uint32_t)0x000000C0)
+ #define RCC_PREDIV2_Div14 ((uint32_t)0x000000D0)
+ #define RCC_PREDIV2_Div15 ((uint32_t)0x000000E0)
+ #define RCC_PREDIV2_Div16 ((uint32_t)0x000000F0)
+
+ #define IS_RCC_PREDIV2(PREDIV2) (((PREDIV2) == RCC_PREDIV2_Div1) || ((PREDIV2) == RCC_PREDIV2_Div2) || \
+ ((PREDIV2) == RCC_PREDIV2_Div3) || ((PREDIV2) == RCC_PREDIV2_Div4) || \
+ ((PREDIV2) == RCC_PREDIV2_Div5) || ((PREDIV2) == RCC_PREDIV2_Div6) || \
+ ((PREDIV2) == RCC_PREDIV2_Div7) || ((PREDIV2) == RCC_PREDIV2_Div8) || \
+ ((PREDIV2) == RCC_PREDIV2_Div9) || ((PREDIV2) == RCC_PREDIV2_Div10) || \
+ ((PREDIV2) == RCC_PREDIV2_Div11) || ((PREDIV2) == RCC_PREDIV2_Div12) || \
+ ((PREDIV2) == RCC_PREDIV2_Div13) || ((PREDIV2) == RCC_PREDIV2_Div14) || \
+ ((PREDIV2) == RCC_PREDIV2_Div15) || ((PREDIV2) == RCC_PREDIV2_Div16))
+/**
+ * @}
+ */
+
+
+/** @defgroup PLL2_multiplication_factor
+ * @{
+ */
+
+ #define RCC_PLL2Mul_8 ((uint32_t)0x00000600)
+ #define RCC_PLL2Mul_9 ((uint32_t)0x00000700)
+ #define RCC_PLL2Mul_10 ((uint32_t)0x00000800)
+ #define RCC_PLL2Mul_11 ((uint32_t)0x00000900)
+ #define RCC_PLL2Mul_12 ((uint32_t)0x00000A00)
+ #define RCC_PLL2Mul_13 ((uint32_t)0x00000B00)
+ #define RCC_PLL2Mul_14 ((uint32_t)0x00000C00)
+ #define RCC_PLL2Mul_16 ((uint32_t)0x00000E00)
+ #define RCC_PLL2Mul_20 ((uint32_t)0x00000F00)
+
+ #define IS_RCC_PLL2_MUL(MUL) (((MUL) == RCC_PLL2Mul_8) || ((MUL) == RCC_PLL2Mul_9) || \
+ ((MUL) == RCC_PLL2Mul_10) || ((MUL) == RCC_PLL2Mul_11) || \
+ ((MUL) == RCC_PLL2Mul_12) || ((MUL) == RCC_PLL2Mul_13) || \
+ ((MUL) == RCC_PLL2Mul_14) || ((MUL) == RCC_PLL2Mul_16) || \
+ ((MUL) == RCC_PLL2Mul_20))
+/**
+ * @}
+ */
+
+
+/** @defgroup PLL3_multiplication_factor
+ * @{
+ */
+
+ #define RCC_PLL3Mul_8 ((uint32_t)0x00006000)
+ #define RCC_PLL3Mul_9 ((uint32_t)0x00007000)
+ #define RCC_PLL3Mul_10 ((uint32_t)0x00008000)
+ #define RCC_PLL3Mul_11 ((uint32_t)0x00009000)
+ #define RCC_PLL3Mul_12 ((uint32_t)0x0000A000)
+ #define RCC_PLL3Mul_13 ((uint32_t)0x0000B000)
+ #define RCC_PLL3Mul_14 ((uint32_t)0x0000C000)
+ #define RCC_PLL3Mul_16 ((uint32_t)0x0000E000)
+ #define RCC_PLL3Mul_20 ((uint32_t)0x0000F000)
+
+ #define IS_RCC_PLL3_MUL(MUL) (((MUL) == RCC_PLL3Mul_8) || ((MUL) == RCC_PLL3Mul_9) || \
+ ((MUL) == RCC_PLL3Mul_10) || ((MUL) == RCC_PLL3Mul_11) || \
+ ((MUL) == RCC_PLL3Mul_12) || ((MUL) == RCC_PLL3Mul_13) || \
+ ((MUL) == RCC_PLL3Mul_14) || ((MUL) == RCC_PLL3Mul_16) || \
+ ((MUL) == RCC_PLL3Mul_20))
+/**
+ * @}
+ */
+
+#endif /* STM32F10X_CL */
+
+
+/** @defgroup System_clock_source
+ * @{
+ */
+
+#define RCC_SYSCLKSource_HSI ((uint32_t)0x00000000)
+#define RCC_SYSCLKSource_HSE ((uint32_t)0x00000001)
+#define RCC_SYSCLKSource_PLLCLK ((uint32_t)0x00000002)
+#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSource_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSource_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup AHB_clock_source
+ * @{
+ */
+
+#define RCC_SYSCLK_Div1 ((uint32_t)0x00000000)
+#define RCC_SYSCLK_Div2 ((uint32_t)0x00000080)
+#define RCC_SYSCLK_Div4 ((uint32_t)0x00000090)
+#define RCC_SYSCLK_Div8 ((uint32_t)0x000000A0)
+#define RCC_SYSCLK_Div16 ((uint32_t)0x000000B0)
+#define RCC_SYSCLK_Div64 ((uint32_t)0x000000C0)
+#define RCC_SYSCLK_Div128 ((uint32_t)0x000000D0)
+#define RCC_SYSCLK_Div256 ((uint32_t)0x000000E0)
+#define RCC_SYSCLK_Div512 ((uint32_t)0x000000F0)
+#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \
+ ((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \
+ ((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \
+ ((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \
+ ((HCLK) == RCC_SYSCLK_Div512))
+/**
+ * @}
+ */
+
+/** @defgroup APB1_APB2_clock_source
+ * @{
+ */
+
+#define RCC_HCLK_Div1 ((uint32_t)0x00000000)
+#define RCC_HCLK_Div2 ((uint32_t)0x00000400)
+#define RCC_HCLK_Div4 ((uint32_t)0x00000500)
+#define RCC_HCLK_Div8 ((uint32_t)0x00000600)
+#define RCC_HCLK_Div16 ((uint32_t)0x00000700)
+#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \
+ ((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \
+ ((PCLK) == RCC_HCLK_Div16))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Interrupt_source
+ * @{
+ */
+
+#define RCC_IT_LSIRDY ((uint8_t)0x01)
+#define RCC_IT_LSERDY ((uint8_t)0x02)
+#define RCC_IT_HSIRDY ((uint8_t)0x04)
+#define RCC_IT_HSERDY ((uint8_t)0x08)
+#define RCC_IT_PLLRDY ((uint8_t)0x10)
+#define RCC_IT_CSS ((uint8_t)0x80)
+
+#ifndef STM32F10X_CL
+ #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0xE0) == 0x00) && ((IT) != 0x00))
+ #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \
+ ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \
+ ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS))
+ #define IS_RCC_CLEAR_IT(IT) ((((IT) & (uint8_t)0x60) == 0x00) && ((IT) != 0x00))
+#else
+ #define RCC_IT_PLL2RDY ((uint8_t)0x20)
+ #define RCC_IT_PLL3RDY ((uint8_t)0x40)
+ #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0x80) == 0x00) && ((IT) != 0x00))
+ #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \
+ ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \
+ ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS) || \
+ ((IT) == RCC_IT_PLL2RDY) || ((IT) == RCC_IT_PLL3RDY))
+ #define IS_RCC_CLEAR_IT(IT) ((IT) != 0x00)
+#endif /* STM32F10X_CL */
+
+
+/**
+ * @}
+ */
+
+#ifndef STM32F10X_CL
+/** @defgroup USB_Device_clock_source
+ * @{
+ */
+
+ #define RCC_USBCLKSource_PLLCLK_1Div5 ((uint8_t)0x00)
+ #define RCC_USBCLKSource_PLLCLK_Div1 ((uint8_t)0x01)
+
+ #define IS_RCC_USBCLK_SOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSource_PLLCLK_1Div5) || \
+ ((SOURCE) == RCC_USBCLKSource_PLLCLK_Div1))
+/**
+ * @}
+ */
+#else
+/** @defgroup USB_OTG_FS_clock_source
+ * @{
+ */
+ #define RCC_OTGFSCLKSource_PLLVCO_Div3 ((uint8_t)0x00)
+ #define RCC_OTGFSCLKSource_PLLVCO_Div2 ((uint8_t)0x01)
+
+ #define IS_RCC_OTGFSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div3) || \
+ ((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div2))
+/**
+ * @}
+ */
+#endif /* STM32F10X_CL */
+
+
+#ifdef STM32F10X_CL
+/** @defgroup I2S2_clock_source
+ * @{
+ */
+ #define RCC_I2S2CLKSource_SYSCLK ((uint8_t)0x00)
+ #define RCC_I2S2CLKSource_PLL3_VCO ((uint8_t)0x01)
+
+ #define IS_RCC_I2S2CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S2CLKSource_SYSCLK) || \
+ ((SOURCE) == RCC_I2S2CLKSource_PLL3_VCO))
+/**
+ * @}
+ */
+
+/** @defgroup I2S3_clock_source
+ * @{
+ */
+ #define RCC_I2S3CLKSource_SYSCLK ((uint8_t)0x00)
+ #define RCC_I2S3CLKSource_PLL3_VCO ((uint8_t)0x01)
+
+ #define IS_RCC_I2S3CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S3CLKSource_SYSCLK) || \
+ ((SOURCE) == RCC_I2S3CLKSource_PLL3_VCO))
+/**
+ * @}
+ */
+#endif /* STM32F10X_CL */
+
+
+/** @defgroup ADC_clock_source
+ * @{
+ */
+
+#define RCC_PCLK2_Div2 ((uint32_t)0x00000000)
+#define RCC_PCLK2_Div4 ((uint32_t)0x00004000)
+#define RCC_PCLK2_Div6 ((uint32_t)0x00008000)
+#define RCC_PCLK2_Div8 ((uint32_t)0x0000C000)
+#define IS_RCC_ADCCLK(ADCCLK) (((ADCCLK) == RCC_PCLK2_Div2) || ((ADCCLK) == RCC_PCLK2_Div4) || \
+ ((ADCCLK) == RCC_PCLK2_Div6) || ((ADCCLK) == RCC_PCLK2_Div8))
+/**
+ * @}
+ */
+
+/** @defgroup LSE_configuration
+ * @{
+ */
+
+#define RCC_LSE_OFF ((uint8_t)0x00)
+#define RCC_LSE_ON ((uint8_t)0x01)
+#define RCC_LSE_Bypass ((uint8_t)0x04)
+#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
+ ((LSE) == RCC_LSE_Bypass))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_clock_source
+ * @{
+ */
+
+#define RCC_RTCCLKSource_LSE ((uint32_t)0x00000100)
+#define RCC_RTCCLKSource_LSI ((uint32_t)0x00000200)
+#define RCC_RTCCLKSource_HSE_Div128 ((uint32_t)0x00000300)
+#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \
+ ((SOURCE) == RCC_RTCCLKSource_LSI) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div128))
+/**
+ * @}
+ */
+
+/** @defgroup AHB_peripheral
+ * @{
+ */
+
+#define RCC_AHBPeriph_DMA1 ((uint32_t)0x00000001)
+#define RCC_AHBPeriph_DMA2 ((uint32_t)0x00000002)
+#define RCC_AHBPeriph_SRAM ((uint32_t)0x00000004)
+#define RCC_AHBPeriph_FLITF ((uint32_t)0x00000010)
+#define RCC_AHBPeriph_CRC ((uint32_t)0x00000040)
+
+#ifndef STM32F10X_CL
+ #define RCC_AHBPeriph_FSMC ((uint32_t)0x00000100)
+ #define RCC_AHBPeriph_SDIO ((uint32_t)0x00000400)
+ #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFAA8) == 0x00) && ((PERIPH) != 0x00))
+#else
+ #define RCC_AHBPeriph_OTG_FS ((uint32_t)0x00001000)
+ #define RCC_AHBPeriph_ETH_MAC ((uint32_t)0x00004000)
+ #define RCC_AHBPeriph_ETH_MAC_Tx ((uint32_t)0x00008000)
+ #define RCC_AHBPeriph_ETH_MAC_Rx ((uint32_t)0x00010000)
+
+ #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFE2FA8) == 0x00) && ((PERIPH) != 0x00))
+ #define IS_RCC_AHB_PERIPH_RESET(PERIPH) ((((PERIPH) & 0xFFFFAFFF) == 0x00) && ((PERIPH) != 0x00))
+#endif /* STM32F10X_CL */
+/**
+ * @}
+ */
+
+/** @defgroup APB2_peripheral
+ * @{
+ */
+
+#define RCC_APB2Periph_AFIO ((uint32_t)0x00000001)
+#define RCC_APB2Periph_GPIOA ((uint32_t)0x00000004)
+#define RCC_APB2Periph_GPIOB ((uint32_t)0x00000008)
+#define RCC_APB2Periph_GPIOC ((uint32_t)0x00000010)
+#define RCC_APB2Periph_GPIOD ((uint32_t)0x00000020)
+#define RCC_APB2Periph_GPIOE ((uint32_t)0x00000040)
+#define RCC_APB2Periph_GPIOF ((uint32_t)0x00000080)
+#define RCC_APB2Periph_GPIOG ((uint32_t)0x00000100)
+#define RCC_APB2Periph_ADC1 ((uint32_t)0x00000200)
+#define RCC_APB2Periph_ADC2 ((uint32_t)0x00000400)
+#define RCC_APB2Periph_TIM1 ((uint32_t)0x00000800)
+#define RCC_APB2Periph_SPI1 ((uint32_t)0x00001000)
+#define RCC_APB2Periph_TIM8 ((uint32_t)0x00002000)
+#define RCC_APB2Periph_USART1 ((uint32_t)0x00004000)
+#define RCC_APB2Periph_ADC3 ((uint32_t)0x00008000)
+#define RCC_APB2Periph_TIM15 ((uint32_t)0x00010000)
+#define RCC_APB2Periph_TIM16 ((uint32_t)0x00020000)
+#define RCC_APB2Periph_TIM17 ((uint32_t)0x00040000)
+#define RCC_APB2Periph_TIM9 ((uint32_t)0x00080000)
+#define RCC_APB2Periph_TIM10 ((uint32_t)0x00100000)
+#define RCC_APB2Periph_TIM11 ((uint32_t)0x00200000)
+
+#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFC00002) == 0x00) && ((PERIPH) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup APB1_peripheral
+ * @{
+ */
+
+#define RCC_APB1Periph_TIM2 ((uint32_t)0x00000001)
+#define RCC_APB1Periph_TIM3 ((uint32_t)0x00000002)
+#define RCC_APB1Periph_TIM4 ((uint32_t)0x00000004)
+#define RCC_APB1Periph_TIM5 ((uint32_t)0x00000008)
+#define RCC_APB1Periph_TIM6 ((uint32_t)0x00000010)
+#define RCC_APB1Periph_TIM7 ((uint32_t)0x00000020)
+#define RCC_APB1Periph_TIM12 ((uint32_t)0x00000040)
+#define RCC_APB1Periph_TIM13 ((uint32_t)0x00000080)
+#define RCC_APB1Periph_TIM14 ((uint32_t)0x00000100)
+#define RCC_APB1Periph_WWDG ((uint32_t)0x00000800)
+#define RCC_APB1Periph_SPI2 ((uint32_t)0x00004000)
+#define RCC_APB1Periph_SPI3 ((uint32_t)0x00008000)
+#define RCC_APB1Periph_USART2 ((uint32_t)0x00020000)
+#define RCC_APB1Periph_USART3 ((uint32_t)0x00040000)
+#define RCC_APB1Periph_UART4 ((uint32_t)0x00080000)
+#define RCC_APB1Periph_UART5 ((uint32_t)0x00100000)
+#define RCC_APB1Periph_I2C1 ((uint32_t)0x00200000)
+#define RCC_APB1Periph_I2C2 ((uint32_t)0x00400000)
+#define RCC_APB1Periph_USB ((uint32_t)0x00800000)
+#define RCC_APB1Periph_CAN1 ((uint32_t)0x02000000)
+#define RCC_APB1Periph_CAN2 ((uint32_t)0x04000000)
+#define RCC_APB1Periph_BKP ((uint32_t)0x08000000)
+#define RCC_APB1Periph_PWR ((uint32_t)0x10000000)
+#define RCC_APB1Periph_DAC ((uint32_t)0x20000000)
+#define RCC_APB1Periph_CEC ((uint32_t)0x40000000)
+
+#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0x81013600) == 0x00) && ((PERIPH) != 0x00))
+
+/**
+ * @}
+ */
+
+/** @defgroup Clock_source_to_output_on_MCO_pin
+ * @{
+ */
+
+#define RCC_MCO_NoClock ((uint8_t)0x00)
+#define RCC_MCO_SYSCLK ((uint8_t)0x04)
+#define RCC_MCO_HSI ((uint8_t)0x05)
+#define RCC_MCO_HSE ((uint8_t)0x06)
+#define RCC_MCO_PLLCLK_Div2 ((uint8_t)0x07)
+
+#ifndef STM32F10X_CL
+ #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \
+ ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \
+ ((MCO) == RCC_MCO_PLLCLK_Div2))
+#else
+ #define RCC_MCO_PLL2CLK ((uint8_t)0x08)
+ #define RCC_MCO_PLL3CLK_Div2 ((uint8_t)0x09)
+ #define RCC_MCO_XT1 ((uint8_t)0x0A)
+ #define RCC_MCO_PLL3CLK ((uint8_t)0x0B)
+
+ #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \
+ ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \
+ ((MCO) == RCC_MCO_PLLCLK_Div2) || ((MCO) == RCC_MCO_PLL2CLK) || \
+ ((MCO) == RCC_MCO_PLL3CLK_Div2) || ((MCO) == RCC_MCO_XT1) || \
+ ((MCO) == RCC_MCO_PLL3CLK))
+#endif /* STM32F10X_CL */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flag
+ * @{
+ */
+
+#define RCC_FLAG_HSIRDY ((uint8_t)0x21)
+#define RCC_FLAG_HSERDY ((uint8_t)0x31)
+#define RCC_FLAG_PLLRDY ((uint8_t)0x39)
+#define RCC_FLAG_LSERDY ((uint8_t)0x41)
+#define RCC_FLAG_LSIRDY ((uint8_t)0x61)
+#define RCC_FLAG_PINRST ((uint8_t)0x7A)
+#define RCC_FLAG_PORRST ((uint8_t)0x7B)
+#define RCC_FLAG_SFTRST ((uint8_t)0x7C)
+#define RCC_FLAG_IWDGRST ((uint8_t)0x7D)
+#define RCC_FLAG_WWDGRST ((uint8_t)0x7E)
+#define RCC_FLAG_LPWRRST ((uint8_t)0x7F)
+
+#ifndef STM32F10X_CL
+ #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \
+ ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \
+ ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \
+ ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \
+ ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \
+ ((FLAG) == RCC_FLAG_LPWRRST))
+#else
+ #define RCC_FLAG_PLL2RDY ((uint8_t)0x3B)
+ #define RCC_FLAG_PLL3RDY ((uint8_t)0x3D)
+ #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \
+ ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \
+ ((FLAG) == RCC_FLAG_PLL2RDY) || ((FLAG) == RCC_FLAG_PLL3RDY) || \
+ ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \
+ ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \
+ ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \
+ ((FLAG) == RCC_FLAG_LPWRRST))
+#endif /* STM32F10X_CL */
+
+#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Exported_Functions
+ * @{
+ */
+
+void RCC_DeInit(void);
+void RCC_HSEConfig(uint32_t RCC_HSE);
+ErrorStatus RCC_WaitForHSEStartUp(void);
+void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue);
+void RCC_HSICmd(FunctionalState NewState);
+void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul);
+void RCC_PLLCmd(FunctionalState NewState);
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+ void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div);
+#endif
+
+#ifdef STM32F10X_CL
+ void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div);
+ void RCC_PLL2Config(uint32_t RCC_PLL2Mul);
+ void RCC_PLL2Cmd(FunctionalState NewState);
+ void RCC_PLL3Config(uint32_t RCC_PLL3Mul);
+ void RCC_PLL3Cmd(FunctionalState NewState);
+#endif /* STM32F10X_CL */
+
+void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource);
+uint8_t RCC_GetSYSCLKSource(void);
+void RCC_HCLKConfig(uint32_t RCC_SYSCLK);
+void RCC_PCLK1Config(uint32_t RCC_HCLK);
+void RCC_PCLK2Config(uint32_t RCC_HCLK);
+void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState);
+
+#ifndef STM32F10X_CL
+ void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource);
+#else
+ void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource);
+#endif /* STM32F10X_CL */
+
+void RCC_ADCCLKConfig(uint32_t RCC_PCLK2);
+
+#ifdef STM32F10X_CL
+ void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource);
+ void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource);
+#endif /* STM32F10X_CL */
+
+void RCC_LSEConfig(uint8_t RCC_LSE);
+void RCC_LSICmd(FunctionalState NewState);
+void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource);
+void RCC_RTCCLKCmd(FunctionalState NewState);
+void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks);
+void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState);
+void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState);
+void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState);
+
+#ifdef STM32F10X_CL
+void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState);
+#endif /* STM32F10X_CL */
+
+void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState);
+void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState);
+void RCC_BackupResetCmd(FunctionalState NewState);
+void RCC_ClockSecuritySystemCmd(FunctionalState NewState);
+void RCC_MCOConfig(uint8_t RCC_MCO);
+FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG);
+void RCC_ClearFlag(void);
+ITStatus RCC_GetITStatus(uint8_t RCC_IT);
+void RCC_ClearITPendingBit(uint8_t RCC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_RCC_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_rtc.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_rtc.h
new file mode 100644
index 00000000..214a5893
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_rtc.h
@@ -0,0 +1,135 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_rtc.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the RTC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_RTC_H
+#define __STM32F10x_RTC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup RTC
+ * @{
+ */
+
+/** @defgroup RTC_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup RTC_interrupts_define
+ * @{
+ */
+
+#define RTC_IT_OW ((uint16_t)0x0004) /*!< Overflow interrupt */
+#define RTC_IT_ALR ((uint16_t)0x0002) /*!< Alarm interrupt */
+#define RTC_IT_SEC ((uint16_t)0x0001) /*!< Second interrupt */
+#define IS_RTC_IT(IT) ((((IT) & (uint16_t)0xFFF8) == 0x00) && ((IT) != 0x00))
+#define IS_RTC_GET_IT(IT) (((IT) == RTC_IT_OW) || ((IT) == RTC_IT_ALR) || \
+ ((IT) == RTC_IT_SEC))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_interrupts_flags
+ * @{
+ */
+
+#define RTC_FLAG_RTOFF ((uint16_t)0x0020) /*!< RTC Operation OFF flag */
+#define RTC_FLAG_RSF ((uint16_t)0x0008) /*!< Registers Synchronized flag */
+#define RTC_FLAG_OW ((uint16_t)0x0004) /*!< Overflow flag */
+#define RTC_FLAG_ALR ((uint16_t)0x0002) /*!< Alarm flag */
+#define RTC_FLAG_SEC ((uint16_t)0x0001) /*!< Second flag */
+#define IS_RTC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFFF0) == 0x00) && ((FLAG) != 0x00))
+#define IS_RTC_GET_FLAG(FLAG) (((FLAG) == RTC_FLAG_RTOFF) || ((FLAG) == RTC_FLAG_RSF) || \
+ ((FLAG) == RTC_FLAG_OW) || ((FLAG) == RTC_FLAG_ALR) || \
+ ((FLAG) == RTC_FLAG_SEC))
+#define IS_RTC_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFFFFF)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions
+ * @{
+ */
+
+void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState);
+void RTC_EnterConfigMode(void);
+void RTC_ExitConfigMode(void);
+uint32_t RTC_GetCounter(void);
+void RTC_SetCounter(uint32_t CounterValue);
+void RTC_SetPrescaler(uint32_t PrescalerValue);
+void RTC_SetAlarm(uint32_t AlarmValue);
+uint32_t RTC_GetDivider(void);
+void RTC_WaitForLastTask(void);
+void RTC_WaitForSynchro(void);
+FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG);
+void RTC_ClearFlag(uint16_t RTC_FLAG);
+ITStatus RTC_GetITStatus(uint16_t RTC_IT);
+void RTC_ClearITPendingBit(uint16_t RTC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_RTC_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_sdio.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_sdio.h
new file mode 100644
index 00000000..40cfdedc
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_sdio.h
@@ -0,0 +1,531 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_sdio.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the SDIO firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_SDIO_H
+#define __STM32F10x_SDIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup SDIO
+ * @{
+ */
+
+/** @defgroup SDIO_Exported_Types
+ * @{
+ */
+
+typedef struct
+{
+ uint32_t SDIO_ClockEdge; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SDIO_Clock_Edge */
+
+ uint32_t SDIO_ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is
+ enabled or disabled.
+ This parameter can be a value of @ref SDIO_Clock_Bypass */
+
+ uint32_t SDIO_ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or
+ disabled when the bus is idle.
+ This parameter can be a value of @ref SDIO_Clock_Power_Save */
+
+ uint32_t SDIO_BusWide; /*!< Specifies the SDIO bus width.
+ This parameter can be a value of @ref SDIO_Bus_Wide */
+
+ uint32_t SDIO_HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled.
+ This parameter can be a value of @ref SDIO_Hardware_Flow_Control */
+
+ uint8_t SDIO_ClockDiv; /*!< Specifies the clock frequency of the SDIO controller.
+ This parameter can be a value between 0x00 and 0xFF. */
+
+} SDIO_InitTypeDef;
+
+typedef struct
+{
+ uint32_t SDIO_Argument; /*!< Specifies the SDIO command argument which is sent
+ to a card as part of a command message. If a command
+ contains an argument, it must be loaded into this register
+ before writing the command to the command register */
+
+ uint32_t SDIO_CmdIndex; /*!< Specifies the SDIO command index. It must be lower than 0x40. */
+
+ uint32_t SDIO_Response; /*!< Specifies the SDIO response type.
+ This parameter can be a value of @ref SDIO_Response_Type */
+
+ uint32_t SDIO_Wait; /*!< Specifies whether SDIO wait-for-interrupt request is enabled or disabled.
+ This parameter can be a value of @ref SDIO_Wait_Interrupt_State */
+
+ uint32_t SDIO_CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM)
+ is enabled or disabled.
+ This parameter can be a value of @ref SDIO_CPSM_State */
+} SDIO_CmdInitTypeDef;
+
+typedef struct
+{
+ uint32_t SDIO_DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */
+
+ uint32_t SDIO_DataLength; /*!< Specifies the number of data bytes to be transferred. */
+
+ uint32_t SDIO_DataBlockSize; /*!< Specifies the data block size for block transfer.
+ This parameter can be a value of @ref SDIO_Data_Block_Size */
+
+ uint32_t SDIO_TransferDir; /*!< Specifies the data transfer direction, whether the transfer
+ is a read or write.
+ This parameter can be a value of @ref SDIO_Transfer_Direction */
+
+ uint32_t SDIO_TransferMode; /*!< Specifies whether data transfer is in stream or block mode.
+ This parameter can be a value of @ref SDIO_Transfer_Type */
+
+ uint32_t SDIO_DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM)
+ is enabled or disabled.
+ This parameter can be a value of @ref SDIO_DPSM_State */
+} SDIO_DataInitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Exported_Constants
+ * @{
+ */
+
+/** @defgroup SDIO_Clock_Edge
+ * @{
+ */
+
+#define SDIO_ClockEdge_Rising ((uint32_t)0x00000000)
+#define SDIO_ClockEdge_Falling ((uint32_t)0x00002000)
+#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \
+ ((EDGE) == SDIO_ClockEdge_Falling))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Bypass
+ * @{
+ */
+
+#define SDIO_ClockBypass_Disable ((uint32_t)0x00000000)
+#define SDIO_ClockBypass_Enable ((uint32_t)0x00000400)
+#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \
+ ((BYPASS) == SDIO_ClockBypass_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Power_Save
+ * @{
+ */
+
+#define SDIO_ClockPowerSave_Disable ((uint32_t)0x00000000)
+#define SDIO_ClockPowerSave_Enable ((uint32_t)0x00000200)
+#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \
+ ((SAVE) == SDIO_ClockPowerSave_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Bus_Wide
+ * @{
+ */
+
+#define SDIO_BusWide_1b ((uint32_t)0x00000000)
+#define SDIO_BusWide_4b ((uint32_t)0x00000800)
+#define SDIO_BusWide_8b ((uint32_t)0x00001000)
+#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \
+ ((WIDE) == SDIO_BusWide_8b))
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Hardware_Flow_Control
+ * @{
+ */
+
+#define SDIO_HardwareFlowControl_Disable ((uint32_t)0x00000000)
+#define SDIO_HardwareFlowControl_Enable ((uint32_t)0x00004000)
+#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \
+ ((CONTROL) == SDIO_HardwareFlowControl_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Power_State
+ * @{
+ */
+
+#define SDIO_PowerState_OFF ((uint32_t)0x00000000)
+#define SDIO_PowerState_ON ((uint32_t)0x00000003)
+#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON))
+/**
+ * @}
+ */
+
+
+/** @defgroup SDIO_Interrupt_sources
+ * @{
+ */
+
+#define SDIO_IT_CCRCFAIL ((uint32_t)0x00000001)
+#define SDIO_IT_DCRCFAIL ((uint32_t)0x00000002)
+#define SDIO_IT_CTIMEOUT ((uint32_t)0x00000004)
+#define SDIO_IT_DTIMEOUT ((uint32_t)0x00000008)
+#define SDIO_IT_TXUNDERR ((uint32_t)0x00000010)
+#define SDIO_IT_RXOVERR ((uint32_t)0x00000020)
+#define SDIO_IT_CMDREND ((uint32_t)0x00000040)
+#define SDIO_IT_CMDSENT ((uint32_t)0x00000080)
+#define SDIO_IT_DATAEND ((uint32_t)0x00000100)
+#define SDIO_IT_STBITERR ((uint32_t)0x00000200)
+#define SDIO_IT_DBCKEND ((uint32_t)0x00000400)
+#define SDIO_IT_CMDACT ((uint32_t)0x00000800)
+#define SDIO_IT_TXACT ((uint32_t)0x00001000)
+#define SDIO_IT_RXACT ((uint32_t)0x00002000)
+#define SDIO_IT_TXFIFOHE ((uint32_t)0x00004000)
+#define SDIO_IT_RXFIFOHF ((uint32_t)0x00008000)
+#define SDIO_IT_TXFIFOF ((uint32_t)0x00010000)
+#define SDIO_IT_RXFIFOF ((uint32_t)0x00020000)
+#define SDIO_IT_TXFIFOE ((uint32_t)0x00040000)
+#define SDIO_IT_RXFIFOE ((uint32_t)0x00080000)
+#define SDIO_IT_TXDAVL ((uint32_t)0x00100000)
+#define SDIO_IT_RXDAVL ((uint32_t)0x00200000)
+#define SDIO_IT_SDIOIT ((uint32_t)0x00400000)
+#define SDIO_IT_CEATAEND ((uint32_t)0x00800000)
+#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Command_Index
+ * @{
+ */
+
+#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Response_Type
+ * @{
+ */
+
+#define SDIO_Response_No ((uint32_t)0x00000000)
+#define SDIO_Response_Short ((uint32_t)0x00000040)
+#define SDIO_Response_Long ((uint32_t)0x000000C0)
+#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \
+ ((RESPONSE) == SDIO_Response_Short) || \
+ ((RESPONSE) == SDIO_Response_Long))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Wait_Interrupt_State
+ * @{
+ */
+
+#define SDIO_Wait_No ((uint32_t)0x00000000) /*!< SDIO No Wait, TimeOut is enabled */
+#define SDIO_Wait_IT ((uint32_t)0x00000100) /*!< SDIO Wait Interrupt Request */
+#define SDIO_Wait_Pend ((uint32_t)0x00000200) /*!< SDIO Wait End of transfer */
+#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \
+ ((WAIT) == SDIO_Wait_Pend))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_CPSM_State
+ * @{
+ */
+
+#define SDIO_CPSM_Disable ((uint32_t)0x00000000)
+#define SDIO_CPSM_Enable ((uint32_t)0x00000400)
+#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Response_Registers
+ * @{
+ */
+
+#define SDIO_RESP1 ((uint32_t)0x00000000)
+#define SDIO_RESP2 ((uint32_t)0x00000004)
+#define SDIO_RESP3 ((uint32_t)0x00000008)
+#define SDIO_RESP4 ((uint32_t)0x0000000C)
+#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \
+ ((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Data_Length
+ * @{
+ */
+
+#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Data_Block_Size
+ * @{
+ */
+
+#define SDIO_DataBlockSize_1b ((uint32_t)0x00000000)
+#define SDIO_DataBlockSize_2b ((uint32_t)0x00000010)
+#define SDIO_DataBlockSize_4b ((uint32_t)0x00000020)
+#define SDIO_DataBlockSize_8b ((uint32_t)0x00000030)
+#define SDIO_DataBlockSize_16b ((uint32_t)0x00000040)
+#define SDIO_DataBlockSize_32b ((uint32_t)0x00000050)
+#define SDIO_DataBlockSize_64b ((uint32_t)0x00000060)
+#define SDIO_DataBlockSize_128b ((uint32_t)0x00000070)
+#define SDIO_DataBlockSize_256b ((uint32_t)0x00000080)
+#define SDIO_DataBlockSize_512b ((uint32_t)0x00000090)
+#define SDIO_DataBlockSize_1024b ((uint32_t)0x000000A0)
+#define SDIO_DataBlockSize_2048b ((uint32_t)0x000000B0)
+#define SDIO_DataBlockSize_4096b ((uint32_t)0x000000C0)
+#define SDIO_DataBlockSize_8192b ((uint32_t)0x000000D0)
+#define SDIO_DataBlockSize_16384b ((uint32_t)0x000000E0)
+#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \
+ ((SIZE) == SDIO_DataBlockSize_2b) || \
+ ((SIZE) == SDIO_DataBlockSize_4b) || \
+ ((SIZE) == SDIO_DataBlockSize_8b) || \
+ ((SIZE) == SDIO_DataBlockSize_16b) || \
+ ((SIZE) == SDIO_DataBlockSize_32b) || \
+ ((SIZE) == SDIO_DataBlockSize_64b) || \
+ ((SIZE) == SDIO_DataBlockSize_128b) || \
+ ((SIZE) == SDIO_DataBlockSize_256b) || \
+ ((SIZE) == SDIO_DataBlockSize_512b) || \
+ ((SIZE) == SDIO_DataBlockSize_1024b) || \
+ ((SIZE) == SDIO_DataBlockSize_2048b) || \
+ ((SIZE) == SDIO_DataBlockSize_4096b) || \
+ ((SIZE) == SDIO_DataBlockSize_8192b) || \
+ ((SIZE) == SDIO_DataBlockSize_16384b))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Transfer_Direction
+ * @{
+ */
+
+#define SDIO_TransferDir_ToCard ((uint32_t)0x00000000)
+#define SDIO_TransferDir_ToSDIO ((uint32_t)0x00000002)
+#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \
+ ((DIR) == SDIO_TransferDir_ToSDIO))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Transfer_Type
+ * @{
+ */
+
+#define SDIO_TransferMode_Block ((uint32_t)0x00000000)
+#define SDIO_TransferMode_Stream ((uint32_t)0x00000004)
+#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \
+ ((MODE) == SDIO_TransferMode_Block))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_DPSM_State
+ * @{
+ */
+
+#define SDIO_DPSM_Disable ((uint32_t)0x00000000)
+#define SDIO_DPSM_Enable ((uint32_t)0x00000001)
+#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Flags
+ * @{
+ */
+
+#define SDIO_FLAG_CCRCFAIL ((uint32_t)0x00000001)
+#define SDIO_FLAG_DCRCFAIL ((uint32_t)0x00000002)
+#define SDIO_FLAG_CTIMEOUT ((uint32_t)0x00000004)
+#define SDIO_FLAG_DTIMEOUT ((uint32_t)0x00000008)
+#define SDIO_FLAG_TXUNDERR ((uint32_t)0x00000010)
+#define SDIO_FLAG_RXOVERR ((uint32_t)0x00000020)
+#define SDIO_FLAG_CMDREND ((uint32_t)0x00000040)
+#define SDIO_FLAG_CMDSENT ((uint32_t)0x00000080)
+#define SDIO_FLAG_DATAEND ((uint32_t)0x00000100)
+#define SDIO_FLAG_STBITERR ((uint32_t)0x00000200)
+#define SDIO_FLAG_DBCKEND ((uint32_t)0x00000400)
+#define SDIO_FLAG_CMDACT ((uint32_t)0x00000800)
+#define SDIO_FLAG_TXACT ((uint32_t)0x00001000)
+#define SDIO_FLAG_RXACT ((uint32_t)0x00002000)
+#define SDIO_FLAG_TXFIFOHE ((uint32_t)0x00004000)
+#define SDIO_FLAG_RXFIFOHF ((uint32_t)0x00008000)
+#define SDIO_FLAG_TXFIFOF ((uint32_t)0x00010000)
+#define SDIO_FLAG_RXFIFOF ((uint32_t)0x00020000)
+#define SDIO_FLAG_TXFIFOE ((uint32_t)0x00040000)
+#define SDIO_FLAG_RXFIFOE ((uint32_t)0x00080000)
+#define SDIO_FLAG_TXDAVL ((uint32_t)0x00100000)
+#define SDIO_FLAG_RXDAVL ((uint32_t)0x00200000)
+#define SDIO_FLAG_SDIOIT ((uint32_t)0x00400000)
+#define SDIO_FLAG_CEATAEND ((uint32_t)0x00800000)
+#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \
+ ((FLAG) == SDIO_FLAG_DCRCFAIL) || \
+ ((FLAG) == SDIO_FLAG_CTIMEOUT) || \
+ ((FLAG) == SDIO_FLAG_DTIMEOUT) || \
+ ((FLAG) == SDIO_FLAG_TXUNDERR) || \
+ ((FLAG) == SDIO_FLAG_RXOVERR) || \
+ ((FLAG) == SDIO_FLAG_CMDREND) || \
+ ((FLAG) == SDIO_FLAG_CMDSENT) || \
+ ((FLAG) == SDIO_FLAG_DATAEND) || \
+ ((FLAG) == SDIO_FLAG_STBITERR) || \
+ ((FLAG) == SDIO_FLAG_DBCKEND) || \
+ ((FLAG) == SDIO_FLAG_CMDACT) || \
+ ((FLAG) == SDIO_FLAG_TXACT) || \
+ ((FLAG) == SDIO_FLAG_RXACT) || \
+ ((FLAG) == SDIO_FLAG_TXFIFOHE) || \
+ ((FLAG) == SDIO_FLAG_RXFIFOHF) || \
+ ((FLAG) == SDIO_FLAG_TXFIFOF) || \
+ ((FLAG) == SDIO_FLAG_RXFIFOF) || \
+ ((FLAG) == SDIO_FLAG_TXFIFOE) || \
+ ((FLAG) == SDIO_FLAG_RXFIFOE) || \
+ ((FLAG) == SDIO_FLAG_TXDAVL) || \
+ ((FLAG) == SDIO_FLAG_RXDAVL) || \
+ ((FLAG) == SDIO_FLAG_SDIOIT) || \
+ ((FLAG) == SDIO_FLAG_CEATAEND))
+
+#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00))
+
+#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \
+ ((IT) == SDIO_IT_DCRCFAIL) || \
+ ((IT) == SDIO_IT_CTIMEOUT) || \
+ ((IT) == SDIO_IT_DTIMEOUT) || \
+ ((IT) == SDIO_IT_TXUNDERR) || \
+ ((IT) == SDIO_IT_RXOVERR) || \
+ ((IT) == SDIO_IT_CMDREND) || \
+ ((IT) == SDIO_IT_CMDSENT) || \
+ ((IT) == SDIO_IT_DATAEND) || \
+ ((IT) == SDIO_IT_STBITERR) || \
+ ((IT) == SDIO_IT_DBCKEND) || \
+ ((IT) == SDIO_IT_CMDACT) || \
+ ((IT) == SDIO_IT_TXACT) || \
+ ((IT) == SDIO_IT_RXACT) || \
+ ((IT) == SDIO_IT_TXFIFOHE) || \
+ ((IT) == SDIO_IT_RXFIFOHF) || \
+ ((IT) == SDIO_IT_TXFIFOF) || \
+ ((IT) == SDIO_IT_RXFIFOF) || \
+ ((IT) == SDIO_IT_TXFIFOE) || \
+ ((IT) == SDIO_IT_RXFIFOE) || \
+ ((IT) == SDIO_IT_TXDAVL) || \
+ ((IT) == SDIO_IT_RXDAVL) || \
+ ((IT) == SDIO_IT_SDIOIT) || \
+ ((IT) == SDIO_IT_CEATAEND))
+
+#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00))
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Read_Wait_Mode
+ * @{
+ */
+
+#define SDIO_ReadWaitMode_CLK ((uint32_t)0x00000001)
+#define SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000000)
+#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \
+ ((MODE) == SDIO_ReadWaitMode_DATA2))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Exported_Functions
+ * @{
+ */
+
+void SDIO_DeInit(void);
+void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct);
+void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct);
+void SDIO_ClockCmd(FunctionalState NewState);
+void SDIO_SetPowerState(uint32_t SDIO_PowerState);
+uint32_t SDIO_GetPowerState(void);
+void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState);
+void SDIO_DMACmd(FunctionalState NewState);
+void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct);
+void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct);
+uint8_t SDIO_GetCommandResponse(void);
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP);
+void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct);
+void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct);
+uint32_t SDIO_GetDataCounter(void);
+uint32_t SDIO_ReadData(void);
+void SDIO_WriteData(uint32_t Data);
+uint32_t SDIO_GetFIFOCount(void);
+void SDIO_StartSDIOReadWait(FunctionalState NewState);
+void SDIO_StopSDIOReadWait(FunctionalState NewState);
+void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode);
+void SDIO_SetSDIOOperation(FunctionalState NewState);
+void SDIO_SendSDIOSuspendCmd(FunctionalState NewState);
+void SDIO_CommandCompletionCmd(FunctionalState NewState);
+void SDIO_CEATAITCmd(FunctionalState NewState);
+void SDIO_SendCEATACmd(FunctionalState NewState);
+FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG);
+void SDIO_ClearFlag(uint32_t SDIO_FLAG);
+ITStatus SDIO_GetITStatus(uint32_t SDIO_IT);
+void SDIO_ClearITPendingBit(uint32_t SDIO_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_SDIO_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_spi.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_spi.h
new file mode 100644
index 00000000..6056c4c6
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_spi.h
@@ -0,0 +1,487 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_spi.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the SPI firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_SPI_H
+#define __STM32F10x_SPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup SPI
+ * @{
+ */
+
+/** @defgroup SPI_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief SPI Init structure definition
+ */
+
+typedef struct
+{
+ uint16_t SPI_Direction; /*!< Specifies the SPI unidirectional or bidirectional data mode.
+ This parameter can be a value of @ref SPI_data_direction */
+
+ uint16_t SPI_Mode; /*!< Specifies the SPI operating mode.
+ This parameter can be a value of @ref SPI_mode */
+
+ uint16_t SPI_DataSize; /*!< Specifies the SPI data size.
+ This parameter can be a value of @ref SPI_data_size */
+
+ uint16_t SPI_CPOL; /*!< Specifies the serial clock steady state.
+ This parameter can be a value of @ref SPI_Clock_Polarity */
+
+ uint16_t SPI_CPHA; /*!< Specifies the clock active edge for the bit capture.
+ This parameter can be a value of @ref SPI_Clock_Phase */
+
+ uint16_t SPI_NSS; /*!< Specifies whether the NSS signal is managed by
+ hardware (NSS pin) or by software using the SSI bit.
+ This parameter can be a value of @ref SPI_Slave_Select_management */
+
+ uint16_t SPI_BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
+ used to configure the transmit and receive SCK clock.
+ This parameter can be a value of @ref SPI_BaudRate_Prescaler.
+ @note The communication clock is derived from the master
+ clock. The slave clock does not need to be set. */
+
+ uint16_t SPI_FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+ uint16_t SPI_CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. */
+}SPI_InitTypeDef;
+
+/**
+ * @brief I2S Init structure definition
+ */
+
+typedef struct
+{
+
+ uint16_t I2S_Mode; /*!< Specifies the I2S operating mode.
+ This parameter can be a value of @ref I2S_Mode */
+
+ uint16_t I2S_Standard; /*!< Specifies the standard used for the I2S communication.
+ This parameter can be a value of @ref I2S_Standard */
+
+ uint16_t I2S_DataFormat; /*!< Specifies the data format for the I2S communication.
+ This parameter can be a value of @ref I2S_Data_Format */
+
+ uint16_t I2S_MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
+ This parameter can be a value of @ref I2S_MCLK_Output */
+
+ uint32_t I2S_AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
+ This parameter can be a value of @ref I2S_Audio_Frequency */
+
+ uint16_t I2S_CPOL; /*!< Specifies the idle state of the I2S clock.
+ This parameter can be a value of @ref I2S_Clock_Polarity */
+}I2S_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Exported_Constants
+ * @{
+ */
+
+#define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI1) || \
+ ((PERIPH) == SPI2) || \
+ ((PERIPH) == SPI3))
+
+#define IS_SPI_23_PERIPH(PERIPH) (((PERIPH) == SPI2) || \
+ ((PERIPH) == SPI3))
+
+/** @defgroup SPI_data_direction
+ * @{
+ */
+
+#define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000)
+#define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400)
+#define SPI_Direction_1Line_Rx ((uint16_t)0x8000)
+#define SPI_Direction_1Line_Tx ((uint16_t)0xC000)
+#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \
+ ((MODE) == SPI_Direction_2Lines_RxOnly) || \
+ ((MODE) == SPI_Direction_1Line_Rx) || \
+ ((MODE) == SPI_Direction_1Line_Tx))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_mode
+ * @{
+ */
+
+#define SPI_Mode_Master ((uint16_t)0x0104)
+#define SPI_Mode_Slave ((uint16_t)0x0000)
+#define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \
+ ((MODE) == SPI_Mode_Slave))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_data_size
+ * @{
+ */
+
+#define SPI_DataSize_16b ((uint16_t)0x0800)
+#define SPI_DataSize_8b ((uint16_t)0x0000)
+#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DataSize_16b) || \
+ ((DATASIZE) == SPI_DataSize_8b))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Polarity
+ * @{
+ */
+
+#define SPI_CPOL_Low ((uint16_t)0x0000)
+#define SPI_CPOL_High ((uint16_t)0x0002)
+#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \
+ ((CPOL) == SPI_CPOL_High))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Phase
+ * @{
+ */
+
+#define SPI_CPHA_1Edge ((uint16_t)0x0000)
+#define SPI_CPHA_2Edge ((uint16_t)0x0001)
+#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \
+ ((CPHA) == SPI_CPHA_2Edge))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Slave_Select_management
+ * @{
+ */
+
+#define SPI_NSS_Soft ((uint16_t)0x0200)
+#define SPI_NSS_Hard ((uint16_t)0x0000)
+#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \
+ ((NSS) == SPI_NSS_Hard))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_BaudRate_Prescaler
+ * @{
+ */
+
+#define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000)
+#define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008)
+#define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010)
+#define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018)
+#define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020)
+#define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028)
+#define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030)
+#define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038)
+#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_4) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_8) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_16) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_32) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_64) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_128) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_256))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_MSB_LSB_transmission
+ * @{
+ */
+
+#define SPI_FirstBit_MSB ((uint16_t)0x0000)
+#define SPI_FirstBit_LSB ((uint16_t)0x0080)
+#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \
+ ((BIT) == SPI_FirstBit_LSB))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Mode
+ * @{
+ */
+
+#define I2S_Mode_SlaveTx ((uint16_t)0x0000)
+#define I2S_Mode_SlaveRx ((uint16_t)0x0100)
+#define I2S_Mode_MasterTx ((uint16_t)0x0200)
+#define I2S_Mode_MasterRx ((uint16_t)0x0300)
+#define IS_I2S_MODE(MODE) (((MODE) == I2S_Mode_SlaveTx) || \
+ ((MODE) == I2S_Mode_SlaveRx) || \
+ ((MODE) == I2S_Mode_MasterTx) || \
+ ((MODE) == I2S_Mode_MasterRx) )
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Standard
+ * @{
+ */
+
+#define I2S_Standard_Phillips ((uint16_t)0x0000)
+#define I2S_Standard_MSB ((uint16_t)0x0010)
+#define I2S_Standard_LSB ((uint16_t)0x0020)
+#define I2S_Standard_PCMShort ((uint16_t)0x0030)
+#define I2S_Standard_PCMLong ((uint16_t)0x00B0)
+#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_Standard_Phillips) || \
+ ((STANDARD) == I2S_Standard_MSB) || \
+ ((STANDARD) == I2S_Standard_LSB) || \
+ ((STANDARD) == I2S_Standard_PCMShort) || \
+ ((STANDARD) == I2S_Standard_PCMLong))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Data_Format
+ * @{
+ */
+
+#define I2S_DataFormat_16b ((uint16_t)0x0000)
+#define I2S_DataFormat_16bextended ((uint16_t)0x0001)
+#define I2S_DataFormat_24b ((uint16_t)0x0003)
+#define I2S_DataFormat_32b ((uint16_t)0x0005)
+#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DataFormat_16b) || \
+ ((FORMAT) == I2S_DataFormat_16bextended) || \
+ ((FORMAT) == I2S_DataFormat_24b) || \
+ ((FORMAT) == I2S_DataFormat_32b))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_MCLK_Output
+ * @{
+ */
+
+#define I2S_MCLKOutput_Enable ((uint16_t)0x0200)
+#define I2S_MCLKOutput_Disable ((uint16_t)0x0000)
+#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOutput_Enable) || \
+ ((OUTPUT) == I2S_MCLKOutput_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Audio_Frequency
+ * @{
+ */
+
+#define I2S_AudioFreq_192k ((uint32_t)192000)
+#define I2S_AudioFreq_96k ((uint32_t)96000)
+#define I2S_AudioFreq_48k ((uint32_t)48000)
+#define I2S_AudioFreq_44k ((uint32_t)44100)
+#define I2S_AudioFreq_32k ((uint32_t)32000)
+#define I2S_AudioFreq_22k ((uint32_t)22050)
+#define I2S_AudioFreq_16k ((uint32_t)16000)
+#define I2S_AudioFreq_11k ((uint32_t)11025)
+#define I2S_AudioFreq_8k ((uint32_t)8000)
+#define I2S_AudioFreq_Default ((uint32_t)2)
+
+#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AudioFreq_8k) && \
+ ((FREQ) <= I2S_AudioFreq_192k)) || \
+ ((FREQ) == I2S_AudioFreq_Default))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Clock_Polarity
+ * @{
+ */
+
+#define I2S_CPOL_Low ((uint16_t)0x0000)
+#define I2S_CPOL_High ((uint16_t)0x0008)
+#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_Low) || \
+ ((CPOL) == I2S_CPOL_High))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_I2S_DMA_transfer_requests
+ * @{
+ */
+
+#define SPI_I2S_DMAReq_Tx ((uint16_t)0x0002)
+#define SPI_I2S_DMAReq_Rx ((uint16_t)0x0001)
+#define IS_SPI_I2S_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFFFC) == 0x00) && ((DMAREQ) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_NSS_internal_software_management
+ * @{
+ */
+
+#define SPI_NSSInternalSoft_Set ((uint16_t)0x0100)
+#define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF)
+#define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \
+ ((INTERNAL) == SPI_NSSInternalSoft_Reset))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_Transmit_Receive
+ * @{
+ */
+
+#define SPI_CRC_Tx ((uint8_t)0x00)
+#define SPI_CRC_Rx ((uint8_t)0x01)
+#define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_direction_transmit_receive
+ * @{
+ */
+
+#define SPI_Direction_Rx ((uint16_t)0xBFFF)
+#define SPI_Direction_Tx ((uint16_t)0x4000)
+#define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \
+ ((DIRECTION) == SPI_Direction_Tx))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_I2S_interrupts_definition
+ * @{
+ */
+
+#define SPI_I2S_IT_TXE ((uint8_t)0x71)
+#define SPI_I2S_IT_RXNE ((uint8_t)0x60)
+#define SPI_I2S_IT_ERR ((uint8_t)0x50)
+#define IS_SPI_I2S_CONFIG_IT(IT) (((IT) == SPI_I2S_IT_TXE) || \
+ ((IT) == SPI_I2S_IT_RXNE) || \
+ ((IT) == SPI_I2S_IT_ERR))
+#define SPI_I2S_IT_OVR ((uint8_t)0x56)
+#define SPI_IT_MODF ((uint8_t)0x55)
+#define SPI_IT_CRCERR ((uint8_t)0x54)
+#define I2S_IT_UDR ((uint8_t)0x53)
+#define IS_SPI_I2S_CLEAR_IT(IT) (((IT) == SPI_IT_CRCERR))
+#define IS_SPI_I2S_GET_IT(IT) (((IT) == SPI_I2S_IT_RXNE) || ((IT) == SPI_I2S_IT_TXE) || \
+ ((IT) == I2S_IT_UDR) || ((IT) == SPI_IT_CRCERR) || \
+ ((IT) == SPI_IT_MODF) || ((IT) == SPI_I2S_IT_OVR))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_I2S_flags_definition
+ * @{
+ */
+
+#define SPI_I2S_FLAG_RXNE ((uint16_t)0x0001)
+#define SPI_I2S_FLAG_TXE ((uint16_t)0x0002)
+#define I2S_FLAG_CHSIDE ((uint16_t)0x0004)
+#define I2S_FLAG_UDR ((uint16_t)0x0008)
+#define SPI_FLAG_CRCERR ((uint16_t)0x0010)
+#define SPI_FLAG_MODF ((uint16_t)0x0020)
+#define SPI_I2S_FLAG_OVR ((uint16_t)0x0040)
+#define SPI_I2S_FLAG_BSY ((uint16_t)0x0080)
+#define IS_SPI_I2S_CLEAR_FLAG(FLAG) (((FLAG) == SPI_FLAG_CRCERR))
+#define IS_SPI_I2S_GET_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_BSY) || ((FLAG) == SPI_I2S_FLAG_OVR) || \
+ ((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \
+ ((FLAG) == I2S_FLAG_UDR) || ((FLAG) == I2S_FLAG_CHSIDE) || \
+ ((FLAG) == SPI_I2S_FLAG_TXE) || ((FLAG) == SPI_I2S_FLAG_RXNE))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_polynomial
+ * @{
+ */
+
+#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Exported_Functions
+ * @{
+ */
+
+void SPI_I2S_DeInit(SPI_TypeDef* SPIx);
+void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct);
+void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct);
+void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct);
+void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct);
+void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState);
+void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState);
+void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState);
+void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState);
+void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data);
+uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx);
+void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft);
+void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState);
+void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize);
+void SPI_TransmitCRC(SPI_TypeDef* SPIx);
+void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState);
+uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC);
+uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx);
+void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction);
+FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG);
+void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG);
+ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT);
+void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_SPI_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_tim.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_tim.h
new file mode 100644
index 00000000..cd7ac3e9
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_tim.h
@@ -0,0 +1,1164 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_tim.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the TIM firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_TIM_H
+#define __STM32F10x_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup TIM
+ * @{
+ */
+
+/** @defgroup TIM_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief TIM Time Base Init structure definition
+ * @note This structure is used with all TIMx except for TIM6 and TIM7.
+ */
+
+typedef struct
+{
+ uint16_t TIM_Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between 0x0000 and 0xFFFF */
+
+ uint16_t TIM_CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_Counter_Mode */
+
+ uint16_t TIM_Period; /*!< Specifies the period value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter must be a number between 0x0000 and 0xFFFF. */
+
+ uint16_t TIM_ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_Clock_Division_CKD */
+
+ uint8_t TIM_RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ This parameter must be a number between 0x00 and 0xFF.
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_TimeBaseInitTypeDef;
+
+/**
+ * @brief TIM Output Compare Init structure definition
+ */
+
+typedef struct
+{
+ uint16_t TIM_OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint16_t TIM_OutputState; /*!< Specifies the TIM Output Compare state.
+ This parameter can be a value of @ref TIM_Output_Compare_state */
+
+ uint16_t TIM_OutputNState; /*!< Specifies the TIM complementary Output Compare state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_state
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint16_t TIM_Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between 0x0000 and 0xFFFF */
+
+ uint16_t TIM_OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint16_t TIM_OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint16_t TIM_OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint16_t TIM_OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OCInitTypeDef;
+
+/**
+ * @brief TIM Input Capture Init structure definition
+ */
+
+typedef struct
+{
+
+ uint16_t TIM_Channel; /*!< Specifies the TIM channel.
+ This parameter can be a value of @ref TIM_Channel */
+
+ uint16_t TIM_ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint16_t TIM_ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint16_t TIM_ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint16_t TIM_ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between 0x0 and 0xF */
+} TIM_ICInitTypeDef;
+
+/**
+ * @brief BDTR structure definition
+ * @note This structure is used only with TIM1 and TIM8.
+ */
+
+typedef struct
+{
+
+ uint16_t TIM_OSSRState; /*!< Specifies the Off-State selection used in Run mode.
+ This parameter can be a value of @ref OSSR_Off_State_Selection_for_Run_mode_state */
+
+ uint16_t TIM_OSSIState; /*!< Specifies the Off-State used in Idle state.
+ This parameter can be a value of @ref OSSI_Off_State_Selection_for_Idle_mode_state */
+
+ uint16_t TIM_LOCKLevel; /*!< Specifies the LOCK level parameters.
+ This parameter can be a value of @ref Lock_level */
+
+ uint16_t TIM_DeadTime; /*!< Specifies the delay time between the switching-off and the
+ switching-on of the outputs.
+ This parameter can be a number between 0x00 and 0xFF */
+
+ uint16_t TIM_Break; /*!< Specifies whether the TIM Break input is enabled or not.
+ This parameter can be a value of @ref Break_Input_enable_disable */
+
+ uint16_t TIM_BreakPolarity; /*!< Specifies the TIM Break Input pin polarity.
+ This parameter can be a value of @ref Break_Polarity */
+
+ uint16_t TIM_AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not.
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BDTRInitTypeDef;
+
+/** @defgroup TIM_Exported_constants
+ * @{
+ */
+
+#define IS_TIM_ALL_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM6) || \
+ ((PERIPH) == TIM7) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM9) || \
+ ((PERIPH) == TIM10)|| \
+ ((PERIPH) == TIM11)|| \
+ ((PERIPH) == TIM12)|| \
+ ((PERIPH) == TIM13)|| \
+ ((PERIPH) == TIM14)|| \
+ ((PERIPH) == TIM15)|| \
+ ((PERIPH) == TIM16)|| \
+ ((PERIPH) == TIM17))
+
+/* LIST1: TIM 1 and 8 */
+#define IS_TIM_LIST1_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM8))
+
+/* LIST2: TIM 1, 8, 15 16 and 17 */
+#define IS_TIM_LIST2_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM15)|| \
+ ((PERIPH) == TIM16)|| \
+ ((PERIPH) == TIM17))
+
+/* LIST3: TIM 1, 2, 3, 4, 5 and 8 */
+#define IS_TIM_LIST3_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM8))
+
+/* LIST4: TIM 1, 2, 3, 4, 5, 8, 15, 16 and 17 */
+#define IS_TIM_LIST4_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM15)|| \
+ ((PERIPH) == TIM16)|| \
+ ((PERIPH) == TIM17))
+
+/* LIST5: TIM 1, 2, 3, 4, 5, 8 and 15 */
+#define IS_TIM_LIST5_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM15))
+
+/* LIST6: TIM 1, 2, 3, 4, 5, 8, 9, 12 and 15 */
+#define IS_TIM_LIST6_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM9) || \
+ ((PERIPH) == TIM12)|| \
+ ((PERIPH) == TIM15))
+
+/* LIST7: TIM 1, 2, 3, 4, 5, 6, 7, 8, 9, 12 and 15 */
+#define IS_TIM_LIST7_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM6) || \
+ ((PERIPH) == TIM7) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM9) || \
+ ((PERIPH) == TIM12)|| \
+ ((PERIPH) == TIM15))
+
+/* LIST8: TIM 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13, 14, 15, 16 and 17 */
+#define IS_TIM_LIST8_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM9) || \
+ ((PERIPH) == TIM10)|| \
+ ((PERIPH) == TIM11)|| \
+ ((PERIPH) == TIM12)|| \
+ ((PERIPH) == TIM13)|| \
+ ((PERIPH) == TIM14)|| \
+ ((PERIPH) == TIM15)|| \
+ ((PERIPH) == TIM16)|| \
+ ((PERIPH) == TIM17))
+
+/* LIST9: TIM 1, 2, 3, 4, 5, 6, 7, 8, 15, 16, and 17 */
+#define IS_TIM_LIST9_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM6) || \
+ ((PERIPH) == TIM7) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM15)|| \
+ ((PERIPH) == TIM16)|| \
+ ((PERIPH) == TIM17))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_and_PWM_modes
+ * @{
+ */
+
+#define TIM_OCMode_Timing ((uint16_t)0x0000)
+#define TIM_OCMode_Active ((uint16_t)0x0010)
+#define TIM_OCMode_Inactive ((uint16_t)0x0020)
+#define TIM_OCMode_Toggle ((uint16_t)0x0030)
+#define TIM_OCMode_PWM1 ((uint16_t)0x0060)
+#define TIM_OCMode_PWM2 ((uint16_t)0x0070)
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMode_Timing) || \
+ ((MODE) == TIM_OCMode_Active) || \
+ ((MODE) == TIM_OCMode_Inactive) || \
+ ((MODE) == TIM_OCMode_Toggle)|| \
+ ((MODE) == TIM_OCMode_PWM1) || \
+ ((MODE) == TIM_OCMode_PWM2))
+#define IS_TIM_OCM(MODE) (((MODE) == TIM_OCMode_Timing) || \
+ ((MODE) == TIM_OCMode_Active) || \
+ ((MODE) == TIM_OCMode_Inactive) || \
+ ((MODE) == TIM_OCMode_Toggle)|| \
+ ((MODE) == TIM_OCMode_PWM1) || \
+ ((MODE) == TIM_OCMode_PWM2) || \
+ ((MODE) == TIM_ForcedAction_Active) || \
+ ((MODE) == TIM_ForcedAction_InActive))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_One_Pulse_Mode
+ * @{
+ */
+
+#define TIM_OPMode_Single ((uint16_t)0x0008)
+#define TIM_OPMode_Repetitive ((uint16_t)0x0000)
+#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMode_Single) || \
+ ((MODE) == TIM_OPMode_Repetitive))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Channel
+ * @{
+ */
+
+#define TIM_Channel_1 ((uint16_t)0x0000)
+#define TIM_Channel_2 ((uint16_t)0x0004)
+#define TIM_Channel_3 ((uint16_t)0x0008)
+#define TIM_Channel_4 ((uint16_t)0x000C)
+#define IS_TIM_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \
+ ((CHANNEL) == TIM_Channel_2) || \
+ ((CHANNEL) == TIM_Channel_3) || \
+ ((CHANNEL) == TIM_Channel_4))
+#define IS_TIM_PWMI_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \
+ ((CHANNEL) == TIM_Channel_2))
+#define IS_TIM_COMPLEMENTARY_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \
+ ((CHANNEL) == TIM_Channel_2) || \
+ ((CHANNEL) == TIM_Channel_3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Division_CKD
+ * @{
+ */
+
+#define TIM_CKD_DIV1 ((uint16_t)0x0000)
+#define TIM_CKD_DIV2 ((uint16_t)0x0100)
+#define TIM_CKD_DIV4 ((uint16_t)0x0200)
+#define IS_TIM_CKD_DIV(DIV) (((DIV) == TIM_CKD_DIV1) || \
+ ((DIV) == TIM_CKD_DIV2) || \
+ ((DIV) == TIM_CKD_DIV4))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Counter_Mode
+ * @{
+ */
+
+#define TIM_CounterMode_Up ((uint16_t)0x0000)
+#define TIM_CounterMode_Down ((uint16_t)0x0010)
+#define TIM_CounterMode_CenterAligned1 ((uint16_t)0x0020)
+#define TIM_CounterMode_CenterAligned2 ((uint16_t)0x0040)
+#define TIM_CounterMode_CenterAligned3 ((uint16_t)0x0060)
+#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_CounterMode_Up) || \
+ ((MODE) == TIM_CounterMode_Down) || \
+ ((MODE) == TIM_CounterMode_CenterAligned1) || \
+ ((MODE) == TIM_CounterMode_CenterAligned2) || \
+ ((MODE) == TIM_CounterMode_CenterAligned3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Polarity
+ * @{
+ */
+
+#define TIM_OCPolarity_High ((uint16_t)0x0000)
+#define TIM_OCPolarity_Low ((uint16_t)0x0002)
+#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPolarity_High) || \
+ ((POLARITY) == TIM_OCPolarity_Low))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Polarity
+ * @{
+ */
+
+#define TIM_OCNPolarity_High ((uint16_t)0x0000)
+#define TIM_OCNPolarity_Low ((uint16_t)0x0008)
+#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPolarity_High) || \
+ ((POLARITY) == TIM_OCNPolarity_Low))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_state
+ * @{
+ */
+
+#define TIM_OutputState_Disable ((uint16_t)0x0000)
+#define TIM_OutputState_Enable ((uint16_t)0x0001)
+#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OutputState_Disable) || \
+ ((STATE) == TIM_OutputState_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_state
+ * @{
+ */
+
+#define TIM_OutputNState_Disable ((uint16_t)0x0000)
+#define TIM_OutputNState_Enable ((uint16_t)0x0004)
+#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OutputNState_Disable) || \
+ ((STATE) == TIM_OutputNState_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Capture_Compare_state
+ * @{
+ */
+
+#define TIM_CCx_Enable ((uint16_t)0x0001)
+#define TIM_CCx_Disable ((uint16_t)0x0000)
+#define IS_TIM_CCX(CCX) (((CCX) == TIM_CCx_Enable) || \
+ ((CCX) == TIM_CCx_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Capture_Compare_N_state
+ * @{
+ */
+
+#define TIM_CCxN_Enable ((uint16_t)0x0004)
+#define TIM_CCxN_Disable ((uint16_t)0x0000)
+#define IS_TIM_CCXN(CCXN) (((CCXN) == TIM_CCxN_Enable) || \
+ ((CCXN) == TIM_CCxN_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup Break_Input_enable_disable
+ * @{
+ */
+
+#define TIM_Break_Enable ((uint16_t)0x1000)
+#define TIM_Break_Disable ((uint16_t)0x0000)
+#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_Break_Enable) || \
+ ((STATE) == TIM_Break_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup Break_Polarity
+ * @{
+ */
+
+#define TIM_BreakPolarity_Low ((uint16_t)0x0000)
+#define TIM_BreakPolarity_High ((uint16_t)0x2000)
+#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BreakPolarity_Low) || \
+ ((POLARITY) == TIM_BreakPolarity_High))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_AOE_Bit_Set_Reset
+ * @{
+ */
+
+#define TIM_AutomaticOutput_Enable ((uint16_t)0x4000)
+#define TIM_AutomaticOutput_Disable ((uint16_t)0x0000)
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AutomaticOutput_Enable) || \
+ ((STATE) == TIM_AutomaticOutput_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup Lock_level
+ * @{
+ */
+
+#define TIM_LOCKLevel_OFF ((uint16_t)0x0000)
+#define TIM_LOCKLevel_1 ((uint16_t)0x0100)
+#define TIM_LOCKLevel_2 ((uint16_t)0x0200)
+#define TIM_LOCKLevel_3 ((uint16_t)0x0300)
+#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLevel_OFF) || \
+ ((LEVEL) == TIM_LOCKLevel_1) || \
+ ((LEVEL) == TIM_LOCKLevel_2) || \
+ ((LEVEL) == TIM_LOCKLevel_3))
+/**
+ * @}
+ */
+
+/** @defgroup OSSI_Off_State_Selection_for_Idle_mode_state
+ * @{
+ */
+
+#define TIM_OSSIState_Enable ((uint16_t)0x0400)
+#define TIM_OSSIState_Disable ((uint16_t)0x0000)
+#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSIState_Enable) || \
+ ((STATE) == TIM_OSSIState_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup OSSR_Off_State_Selection_for_Run_mode_state
+ * @{
+ */
+
+#define TIM_OSSRState_Enable ((uint16_t)0x0800)
+#define TIM_OSSRState_Disable ((uint16_t)0x0000)
+#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSRState_Enable) || \
+ ((STATE) == TIM_OSSRState_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Idle_State
+ * @{
+ */
+
+#define TIM_OCIdleState_Set ((uint16_t)0x0100)
+#define TIM_OCIdleState_Reset ((uint16_t)0x0000)
+#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIdleState_Set) || \
+ ((STATE) == TIM_OCIdleState_Reset))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State
+ * @{
+ */
+
+#define TIM_OCNIdleState_Set ((uint16_t)0x0200)
+#define TIM_OCNIdleState_Reset ((uint16_t)0x0000)
+#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIdleState_Set) || \
+ ((STATE) == TIM_OCNIdleState_Reset))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Polarity
+ * @{
+ */
+
+#define TIM_ICPolarity_Rising ((uint16_t)0x0000)
+#define TIM_ICPolarity_Falling ((uint16_t)0x0002)
+#define TIM_ICPolarity_BothEdge ((uint16_t)0x000A)
+#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \
+ ((POLARITY) == TIM_ICPolarity_Falling))
+#define IS_TIM_IC_POLARITY_LITE(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \
+ ((POLARITY) == TIM_ICPolarity_Falling)|| \
+ ((POLARITY) == TIM_ICPolarity_BothEdge))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Selection
+ * @{
+ */
+
+#define TIM_ICSelection_DirectTI ((uint16_t)0x0001) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSelection_IndirectTI ((uint16_t)0x0002) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC2, IC1, IC4 or IC3, respectively. */
+#define TIM_ICSelection_TRC ((uint16_t)0x0003) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC. */
+#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSelection_DirectTI) || \
+ ((SELECTION) == TIM_ICSelection_IndirectTI) || \
+ ((SELECTION) == TIM_ICSelection_TRC))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Prescaler
+ * @{
+ */
+
+#define TIM_ICPSC_DIV1 ((uint16_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input. */
+#define TIM_ICPSC_DIV2 ((uint16_t)0x0004) /*!< Capture performed once every 2 events. */
+#define TIM_ICPSC_DIV4 ((uint16_t)0x0008) /*!< Capture performed once every 4 events. */
+#define TIM_ICPSC_DIV8 ((uint16_t)0x000C) /*!< Capture performed once every 8 events. */
+#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \
+ ((PRESCALER) == TIM_ICPSC_DIV2) || \
+ ((PRESCALER) == TIM_ICPSC_DIV4) || \
+ ((PRESCALER) == TIM_ICPSC_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_interrupt_sources
+ * @{
+ */
+
+#define TIM_IT_Update ((uint16_t)0x0001)
+#define TIM_IT_CC1 ((uint16_t)0x0002)
+#define TIM_IT_CC2 ((uint16_t)0x0004)
+#define TIM_IT_CC3 ((uint16_t)0x0008)
+#define TIM_IT_CC4 ((uint16_t)0x0010)
+#define TIM_IT_COM ((uint16_t)0x0020)
+#define TIM_IT_Trigger ((uint16_t)0x0040)
+#define TIM_IT_Break ((uint16_t)0x0080)
+#define IS_TIM_IT(IT) ((((IT) & (uint16_t)0xFF00) == 0x0000) && ((IT) != 0x0000))
+
+#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_Update) || \
+ ((IT) == TIM_IT_CC1) || \
+ ((IT) == TIM_IT_CC2) || \
+ ((IT) == TIM_IT_CC3) || \
+ ((IT) == TIM_IT_CC4) || \
+ ((IT) == TIM_IT_COM) || \
+ ((IT) == TIM_IT_Trigger) || \
+ ((IT) == TIM_IT_Break))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address
+ * @{
+ */
+
+#define TIM_DMABase_CR1 ((uint16_t)0x0000)
+#define TIM_DMABase_CR2 ((uint16_t)0x0001)
+#define TIM_DMABase_SMCR ((uint16_t)0x0002)
+#define TIM_DMABase_DIER ((uint16_t)0x0003)
+#define TIM_DMABase_SR ((uint16_t)0x0004)
+#define TIM_DMABase_EGR ((uint16_t)0x0005)
+#define TIM_DMABase_CCMR1 ((uint16_t)0x0006)
+#define TIM_DMABase_CCMR2 ((uint16_t)0x0007)
+#define TIM_DMABase_CCER ((uint16_t)0x0008)
+#define TIM_DMABase_CNT ((uint16_t)0x0009)
+#define TIM_DMABase_PSC ((uint16_t)0x000A)
+#define TIM_DMABase_ARR ((uint16_t)0x000B)
+#define TIM_DMABase_RCR ((uint16_t)0x000C)
+#define TIM_DMABase_CCR1 ((uint16_t)0x000D)
+#define TIM_DMABase_CCR2 ((uint16_t)0x000E)
+#define TIM_DMABase_CCR3 ((uint16_t)0x000F)
+#define TIM_DMABase_CCR4 ((uint16_t)0x0010)
+#define TIM_DMABase_BDTR ((uint16_t)0x0011)
+#define TIM_DMABase_DCR ((uint16_t)0x0012)
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \
+ ((BASE) == TIM_DMABase_CR2) || \
+ ((BASE) == TIM_DMABase_SMCR) || \
+ ((BASE) == TIM_DMABase_DIER) || \
+ ((BASE) == TIM_DMABase_SR) || \
+ ((BASE) == TIM_DMABase_EGR) || \
+ ((BASE) == TIM_DMABase_CCMR1) || \
+ ((BASE) == TIM_DMABase_CCMR2) || \
+ ((BASE) == TIM_DMABase_CCER) || \
+ ((BASE) == TIM_DMABase_CNT) || \
+ ((BASE) == TIM_DMABase_PSC) || \
+ ((BASE) == TIM_DMABase_ARR) || \
+ ((BASE) == TIM_DMABase_RCR) || \
+ ((BASE) == TIM_DMABase_CCR1) || \
+ ((BASE) == TIM_DMABase_CCR2) || \
+ ((BASE) == TIM_DMABase_CCR3) || \
+ ((BASE) == TIM_DMABase_CCR4) || \
+ ((BASE) == TIM_DMABase_BDTR) || \
+ ((BASE) == TIM_DMABase_DCR))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Burst_Length
+ * @{
+ */
+
+#define TIM_DMABurstLength_1Transfer ((uint16_t)0x0000)
+#define TIM_DMABurstLength_2Transfers ((uint16_t)0x0100)
+#define TIM_DMABurstLength_3Transfers ((uint16_t)0x0200)
+#define TIM_DMABurstLength_4Transfers ((uint16_t)0x0300)
+#define TIM_DMABurstLength_5Transfers ((uint16_t)0x0400)
+#define TIM_DMABurstLength_6Transfers ((uint16_t)0x0500)
+#define TIM_DMABurstLength_7Transfers ((uint16_t)0x0600)
+#define TIM_DMABurstLength_8Transfers ((uint16_t)0x0700)
+#define TIM_DMABurstLength_9Transfers ((uint16_t)0x0800)
+#define TIM_DMABurstLength_10Transfers ((uint16_t)0x0900)
+#define TIM_DMABurstLength_11Transfers ((uint16_t)0x0A00)
+#define TIM_DMABurstLength_12Transfers ((uint16_t)0x0B00)
+#define TIM_DMABurstLength_13Transfers ((uint16_t)0x0C00)
+#define TIM_DMABurstLength_14Transfers ((uint16_t)0x0D00)
+#define TIM_DMABurstLength_15Transfers ((uint16_t)0x0E00)
+#define TIM_DMABurstLength_16Transfers ((uint16_t)0x0F00)
+#define TIM_DMABurstLength_17Transfers ((uint16_t)0x1000)
+#define TIM_DMABurstLength_18Transfers ((uint16_t)0x1100)
+#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \
+ ((LENGTH) == TIM_DMABurstLength_2Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_3Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_4Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_5Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_6Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_7Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_8Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_9Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_10Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_11Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_12Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_13Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_14Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_15Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_16Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_17Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_18Transfers))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_sources
+ * @{
+ */
+
+#define TIM_DMA_Update ((uint16_t)0x0100)
+#define TIM_DMA_CC1 ((uint16_t)0x0200)
+#define TIM_DMA_CC2 ((uint16_t)0x0400)
+#define TIM_DMA_CC3 ((uint16_t)0x0800)
+#define TIM_DMA_CC4 ((uint16_t)0x1000)
+#define TIM_DMA_COM ((uint16_t)0x2000)
+#define TIM_DMA_Trigger ((uint16_t)0x4000)
+#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0x80FF) == 0x0000) && ((SOURCE) != 0x0000))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_External_Trigger_Prescaler
+ * @{
+ */
+
+#define TIM_ExtTRGPSC_OFF ((uint16_t)0x0000)
+#define TIM_ExtTRGPSC_DIV2 ((uint16_t)0x1000)
+#define TIM_ExtTRGPSC_DIV4 ((uint16_t)0x2000)
+#define TIM_ExtTRGPSC_DIV8 ((uint16_t)0x3000)
+#define IS_TIM_EXT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ExtTRGPSC_OFF) || \
+ ((PRESCALER) == TIM_ExtTRGPSC_DIV2) || \
+ ((PRESCALER) == TIM_ExtTRGPSC_DIV4) || \
+ ((PRESCALER) == TIM_ExtTRGPSC_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Internal_Trigger_Selection
+ * @{
+ */
+
+#define TIM_TS_ITR0 ((uint16_t)0x0000)
+#define TIM_TS_ITR1 ((uint16_t)0x0010)
+#define TIM_TS_ITR2 ((uint16_t)0x0020)
+#define TIM_TS_ITR3 ((uint16_t)0x0030)
+#define TIM_TS_TI1F_ED ((uint16_t)0x0040)
+#define TIM_TS_TI1FP1 ((uint16_t)0x0050)
+#define TIM_TS_TI2FP2 ((uint16_t)0x0060)
+#define TIM_TS_ETRF ((uint16_t)0x0070)
+#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_TI1F_ED) || \
+ ((SELECTION) == TIM_TS_TI1FP1) || \
+ ((SELECTION) == TIM_TS_TI2FP2) || \
+ ((SELECTION) == TIM_TS_ETRF))
+#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_TIx_External_Clock_Source
+ * @{
+ */
+
+#define TIM_TIxExternalCLK1Source_TI1 ((uint16_t)0x0050)
+#define TIM_TIxExternalCLK1Source_TI2 ((uint16_t)0x0060)
+#define TIM_TIxExternalCLK1Source_TI1ED ((uint16_t)0x0040)
+#define IS_TIM_TIXCLK_SOURCE(SOURCE) (((SOURCE) == TIM_TIxExternalCLK1Source_TI1) || \
+ ((SOURCE) == TIM_TIxExternalCLK1Source_TI2) || \
+ ((SOURCE) == TIM_TIxExternalCLK1Source_TI1ED))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_External_Trigger_Polarity
+ * @{
+ */
+#define TIM_ExtTRGPolarity_Inverted ((uint16_t)0x8000)
+#define TIM_ExtTRGPolarity_NonInverted ((uint16_t)0x0000)
+#define IS_TIM_EXT_POLARITY(POLARITY) (((POLARITY) == TIM_ExtTRGPolarity_Inverted) || \
+ ((POLARITY) == TIM_ExtTRGPolarity_NonInverted))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Prescaler_Reload_Mode
+ * @{
+ */
+
+#define TIM_PSCReloadMode_Update ((uint16_t)0x0000)
+#define TIM_PSCReloadMode_Immediate ((uint16_t)0x0001)
+#define IS_TIM_PRESCALER_RELOAD(RELOAD) (((RELOAD) == TIM_PSCReloadMode_Update) || \
+ ((RELOAD) == TIM_PSCReloadMode_Immediate))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Forced_Action
+ * @{
+ */
+
+#define TIM_ForcedAction_Active ((uint16_t)0x0050)
+#define TIM_ForcedAction_InActive ((uint16_t)0x0040)
+#define IS_TIM_FORCED_ACTION(ACTION) (((ACTION) == TIM_ForcedAction_Active) || \
+ ((ACTION) == TIM_ForcedAction_InActive))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Encoder_Mode
+ * @{
+ */
+
+#define TIM_EncoderMode_TI1 ((uint16_t)0x0001)
+#define TIM_EncoderMode_TI2 ((uint16_t)0x0002)
+#define TIM_EncoderMode_TI12 ((uint16_t)0x0003)
+#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_EncoderMode_TI1) || \
+ ((MODE) == TIM_EncoderMode_TI2) || \
+ ((MODE) == TIM_EncoderMode_TI12))
+/**
+ * @}
+ */
+
+
+/** @defgroup TIM_Event_Source
+ * @{
+ */
+
+#define TIM_EventSource_Update ((uint16_t)0x0001)
+#define TIM_EventSource_CC1 ((uint16_t)0x0002)
+#define TIM_EventSource_CC2 ((uint16_t)0x0004)
+#define TIM_EventSource_CC3 ((uint16_t)0x0008)
+#define TIM_EventSource_CC4 ((uint16_t)0x0010)
+#define TIM_EventSource_COM ((uint16_t)0x0020)
+#define TIM_EventSource_Trigger ((uint16_t)0x0040)
+#define TIM_EventSource_Break ((uint16_t)0x0080)
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0xFF00) == 0x0000) && ((SOURCE) != 0x0000))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Update_Source
+ * @{
+ */
+
+#define TIM_UpdateSource_Global ((uint16_t)0x0000) /*!< Source of update is the counter overflow/underflow
+ or the setting of UG bit, or an update generation
+ through the slave mode controller. */
+#define TIM_UpdateSource_Regular ((uint16_t)0x0001) /*!< Source of update is counter overflow/underflow. */
+#define IS_TIM_UPDATE_SOURCE(SOURCE) (((SOURCE) == TIM_UpdateSource_Global) || \
+ ((SOURCE) == TIM_UpdateSource_Regular))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Preload_State
+ * @{
+ */
+
+#define TIM_OCPreload_Enable ((uint16_t)0x0008)
+#define TIM_OCPreload_Disable ((uint16_t)0x0000)
+#define IS_TIM_OCPRELOAD_STATE(STATE) (((STATE) == TIM_OCPreload_Enable) || \
+ ((STATE) == TIM_OCPreload_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Fast_State
+ * @{
+ */
+
+#define TIM_OCFast_Enable ((uint16_t)0x0004)
+#define TIM_OCFast_Disable ((uint16_t)0x0000)
+#define IS_TIM_OCFAST_STATE(STATE) (((STATE) == TIM_OCFast_Enable) || \
+ ((STATE) == TIM_OCFast_Disable))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Clear_State
+ * @{
+ */
+
+#define TIM_OCClear_Enable ((uint16_t)0x0080)
+#define TIM_OCClear_Disable ((uint16_t)0x0000)
+#define IS_TIM_OCCLEAR_STATE(STATE) (((STATE) == TIM_OCClear_Enable) || \
+ ((STATE) == TIM_OCClear_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Output_Source
+ * @{
+ */
+
+#define TIM_TRGOSource_Reset ((uint16_t)0x0000)
+#define TIM_TRGOSource_Enable ((uint16_t)0x0010)
+#define TIM_TRGOSource_Update ((uint16_t)0x0020)
+#define TIM_TRGOSource_OC1 ((uint16_t)0x0030)
+#define TIM_TRGOSource_OC1Ref ((uint16_t)0x0040)
+#define TIM_TRGOSource_OC2Ref ((uint16_t)0x0050)
+#define TIM_TRGOSource_OC3Ref ((uint16_t)0x0060)
+#define TIM_TRGOSource_OC4Ref ((uint16_t)0x0070)
+#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGOSource_Reset) || \
+ ((SOURCE) == TIM_TRGOSource_Enable) || \
+ ((SOURCE) == TIM_TRGOSource_Update) || \
+ ((SOURCE) == TIM_TRGOSource_OC1) || \
+ ((SOURCE) == TIM_TRGOSource_OC1Ref) || \
+ ((SOURCE) == TIM_TRGOSource_OC2Ref) || \
+ ((SOURCE) == TIM_TRGOSource_OC3Ref) || \
+ ((SOURCE) == TIM_TRGOSource_OC4Ref))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Slave_Mode
+ * @{
+ */
+
+#define TIM_SlaveMode_Reset ((uint16_t)0x0004)
+#define TIM_SlaveMode_Gated ((uint16_t)0x0005)
+#define TIM_SlaveMode_Trigger ((uint16_t)0x0006)
+#define TIM_SlaveMode_External1 ((uint16_t)0x0007)
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SlaveMode_Reset) || \
+ ((MODE) == TIM_SlaveMode_Gated) || \
+ ((MODE) == TIM_SlaveMode_Trigger) || \
+ ((MODE) == TIM_SlaveMode_External1))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Slave_Mode
+ * @{
+ */
+
+#define TIM_MasterSlaveMode_Enable ((uint16_t)0x0080)
+#define TIM_MasterSlaveMode_Disable ((uint16_t)0x0000)
+#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MasterSlaveMode_Enable) || \
+ ((STATE) == TIM_MasterSlaveMode_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Flags
+ * @{
+ */
+
+#define TIM_FLAG_Update ((uint16_t)0x0001)
+#define TIM_FLAG_CC1 ((uint16_t)0x0002)
+#define TIM_FLAG_CC2 ((uint16_t)0x0004)
+#define TIM_FLAG_CC3 ((uint16_t)0x0008)
+#define TIM_FLAG_CC4 ((uint16_t)0x0010)
+#define TIM_FLAG_COM ((uint16_t)0x0020)
+#define TIM_FLAG_Trigger ((uint16_t)0x0040)
+#define TIM_FLAG_Break ((uint16_t)0x0080)
+#define TIM_FLAG_CC1OF ((uint16_t)0x0200)
+#define TIM_FLAG_CC2OF ((uint16_t)0x0400)
+#define TIM_FLAG_CC3OF ((uint16_t)0x0800)
+#define TIM_FLAG_CC4OF ((uint16_t)0x1000)
+#define IS_TIM_GET_FLAG(FLAG) (((FLAG) == TIM_FLAG_Update) || \
+ ((FLAG) == TIM_FLAG_CC1) || \
+ ((FLAG) == TIM_FLAG_CC2) || \
+ ((FLAG) == TIM_FLAG_CC3) || \
+ ((FLAG) == TIM_FLAG_CC4) || \
+ ((FLAG) == TIM_FLAG_COM) || \
+ ((FLAG) == TIM_FLAG_Trigger) || \
+ ((FLAG) == TIM_FLAG_Break) || \
+ ((FLAG) == TIM_FLAG_CC1OF) || \
+ ((FLAG) == TIM_FLAG_CC2OF) || \
+ ((FLAG) == TIM_FLAG_CC3OF) || \
+ ((FLAG) == TIM_FLAG_CC4OF))
+
+
+#define IS_TIM_CLEAR_FLAG(TIM_FLAG) ((((TIM_FLAG) & (uint16_t)0xE100) == 0x0000) && ((TIM_FLAG) != 0x0000))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Filer_Value
+ * @{
+ */
+
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_External_Trigger_Filter
+ * @{
+ */
+
+#define IS_TIM_EXT_FILTER(EXTFILTER) ((EXTFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Legacy
+ * @{
+ */
+
+#define TIM_DMABurstLength_1Byte TIM_DMABurstLength_1Transfer
+#define TIM_DMABurstLength_2Bytes TIM_DMABurstLength_2Transfers
+#define TIM_DMABurstLength_3Bytes TIM_DMABurstLength_3Transfers
+#define TIM_DMABurstLength_4Bytes TIM_DMABurstLength_4Transfers
+#define TIM_DMABurstLength_5Bytes TIM_DMABurstLength_5Transfers
+#define TIM_DMABurstLength_6Bytes TIM_DMABurstLength_6Transfers
+#define TIM_DMABurstLength_7Bytes TIM_DMABurstLength_7Transfers
+#define TIM_DMABurstLength_8Bytes TIM_DMABurstLength_8Transfers
+#define TIM_DMABurstLength_9Bytes TIM_DMABurstLength_9Transfers
+#define TIM_DMABurstLength_10Bytes TIM_DMABurstLength_10Transfers
+#define TIM_DMABurstLength_11Bytes TIM_DMABurstLength_11Transfers
+#define TIM_DMABurstLength_12Bytes TIM_DMABurstLength_12Transfers
+#define TIM_DMABurstLength_13Bytes TIM_DMABurstLength_13Transfers
+#define TIM_DMABurstLength_14Bytes TIM_DMABurstLength_14Transfers
+#define TIM_DMABurstLength_15Bytes TIM_DMABurstLength_15Transfers
+#define TIM_DMABurstLength_16Bytes TIM_DMABurstLength_16Transfers
+#define TIM_DMABurstLength_17Bytes TIM_DMABurstLength_17Transfers
+#define TIM_DMABurstLength_18Bytes TIM_DMABurstLength_18Transfers
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions
+ * @{
+ */
+
+void TIM_DeInit(TIM_TypeDef* TIMx);
+void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct);
+void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct);
+void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct);
+void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct);
+void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct);
+void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct);
+void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct);
+void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState);
+void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource);
+void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength);
+void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState);
+void TIM_InternalClockConfig(TIM_TypeDef* TIMx);
+void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource);
+void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource,
+ uint16_t TIM_ICPolarity, uint16_t ICFilter);
+void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
+ uint16_t ExtTRGFilter);
+void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler,
+ uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter);
+void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
+ uint16_t ExtTRGFilter);
+void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode);
+void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode);
+void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource);
+void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode,
+ uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity);
+void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity);
+void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity);
+void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity);
+void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx);
+void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN);
+void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode);
+void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource);
+void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode);
+void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource);
+void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode);
+void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode);
+void TIM_SetCounter(TIM_TypeDef* TIMx, uint16_t Counter);
+void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint16_t Autoreload);
+void TIM_SetCompare1(TIM_TypeDef* TIMx, uint16_t Compare1);
+void TIM_SetCompare2(TIM_TypeDef* TIMx, uint16_t Compare2);
+void TIM_SetCompare3(TIM_TypeDef* TIMx, uint16_t Compare3);
+void TIM_SetCompare4(TIM_TypeDef* TIMx, uint16_t Compare4);
+void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD);
+uint16_t TIM_GetCapture1(TIM_TypeDef* TIMx);
+uint16_t TIM_GetCapture2(TIM_TypeDef* TIMx);
+uint16_t TIM_GetCapture3(TIM_TypeDef* TIMx);
+uint16_t TIM_GetCapture4(TIM_TypeDef* TIMx);
+uint16_t TIM_GetCounter(TIM_TypeDef* TIMx);
+uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx);
+FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG);
+void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG);
+ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT);
+void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_TIM_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_usart.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_usart.h
new file mode 100644
index 00000000..61ae249a
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_usart.h
@@ -0,0 +1,412 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_usart.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the USART
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_USART_H
+#define __STM32F10x_USART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup USART
+ * @{
+ */
+
+/** @defgroup USART_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief USART Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (16 * (USART_InitStruct->USART_BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 16) + 0.5 */
+
+ uint16_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref USART_Word_Length */
+
+ uint16_t USART_StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref USART_Stop_Bits */
+
+ uint16_t USART_Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref USART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint16_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref USART_Mode */
+
+ uint16_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled
+ or disabled.
+ This parameter can be a value of @ref USART_Hardware_Flow_Control */
+} USART_InitTypeDef;
+
+/**
+ * @brief USART Clock Init Structure definition
+ */
+
+typedef struct
+{
+
+ uint16_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled.
+ This parameter can be a value of @ref USART_Clock */
+
+ uint16_t USART_CPOL; /*!< Specifies the steady state value of the serial clock.
+ This parameter can be a value of @ref USART_Clock_Polarity */
+
+ uint16_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref USART_Clock_Phase */
+
+ uint16_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref USART_Last_Bit */
+} USART_ClockInitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Exported_Constants
+ * @{
+ */
+
+#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \
+ ((PERIPH) == USART2) || \
+ ((PERIPH) == USART3) || \
+ ((PERIPH) == UART4) || \
+ ((PERIPH) == UART5))
+
+#define IS_USART_123_PERIPH(PERIPH) (((PERIPH) == USART1) || \
+ ((PERIPH) == USART2) || \
+ ((PERIPH) == USART3))
+
+#define IS_USART_1234_PERIPH(PERIPH) (((PERIPH) == USART1) || \
+ ((PERIPH) == USART2) || \
+ ((PERIPH) == USART3) || \
+ ((PERIPH) == UART4))
+/** @defgroup USART_Word_Length
+ * @{
+ */
+
+#define USART_WordLength_8b ((uint16_t)0x0000)
+#define USART_WordLength_9b ((uint16_t)0x1000)
+
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \
+ ((LENGTH) == USART_WordLength_9b))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Stop_Bits
+ * @{
+ */
+
+#define USART_StopBits_1 ((uint16_t)0x0000)
+#define USART_StopBits_0_5 ((uint16_t)0x1000)
+#define USART_StopBits_2 ((uint16_t)0x2000)
+#define USART_StopBits_1_5 ((uint16_t)0x3000)
+#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \
+ ((STOPBITS) == USART_StopBits_0_5) || \
+ ((STOPBITS) == USART_StopBits_2) || \
+ ((STOPBITS) == USART_StopBits_1_5))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Parity
+ * @{
+ */
+
+#define USART_Parity_No ((uint16_t)0x0000)
+#define USART_Parity_Even ((uint16_t)0x0400)
+#define USART_Parity_Odd ((uint16_t)0x0600)
+#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \
+ ((PARITY) == USART_Parity_Even) || \
+ ((PARITY) == USART_Parity_Odd))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Mode
+ * @{
+ */
+
+#define USART_Mode_Rx ((uint16_t)0x0004)
+#define USART_Mode_Tx ((uint16_t)0x0008)
+#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Hardware_Flow_Control
+ * @{
+ */
+#define USART_HardwareFlowControl_None ((uint16_t)0x0000)
+#define USART_HardwareFlowControl_RTS ((uint16_t)0x0100)
+#define USART_HardwareFlowControl_CTS ((uint16_t)0x0200)
+#define USART_HardwareFlowControl_RTS_CTS ((uint16_t)0x0300)
+#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\
+ (((CONTROL) == USART_HardwareFlowControl_None) || \
+ ((CONTROL) == USART_HardwareFlowControl_RTS) || \
+ ((CONTROL) == USART_HardwareFlowControl_CTS) || \
+ ((CONTROL) == USART_HardwareFlowControl_RTS_CTS))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock
+ * @{
+ */
+#define USART_Clock_Disable ((uint16_t)0x0000)
+#define USART_Clock_Enable ((uint16_t)0x0800)
+#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \
+ ((CLOCK) == USART_Clock_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Polarity
+ * @{
+ */
+
+#define USART_CPOL_Low ((uint16_t)0x0000)
+#define USART_CPOL_High ((uint16_t)0x0400)
+#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High))
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Phase
+ * @{
+ */
+
+#define USART_CPHA_1Edge ((uint16_t)0x0000)
+#define USART_CPHA_2Edge ((uint16_t)0x0200)
+#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge))
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Last_Bit
+ * @{
+ */
+
+#define USART_LastBit_Disable ((uint16_t)0x0000)
+#define USART_LastBit_Enable ((uint16_t)0x0100)
+#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \
+ ((LASTBIT) == USART_LastBit_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interrupt_definition
+ * @{
+ */
+
+#define USART_IT_PE ((uint16_t)0x0028)
+#define USART_IT_TXE ((uint16_t)0x0727)
+#define USART_IT_TC ((uint16_t)0x0626)
+#define USART_IT_RXNE ((uint16_t)0x0525)
+#define USART_IT_IDLE ((uint16_t)0x0424)
+#define USART_IT_LBD ((uint16_t)0x0846)
+#define USART_IT_CTS ((uint16_t)0x096A)
+#define USART_IT_ERR ((uint16_t)0x0060)
+#define USART_IT_ORE ((uint16_t)0x0360)
+#define USART_IT_NE ((uint16_t)0x0260)
+#define USART_IT_FE ((uint16_t)0x0160)
+#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
+ ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
+ ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
+ ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR))
+#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
+ ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
+ ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
+ ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \
+ ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE))
+#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
+ ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS))
+/**
+ * @}
+ */
+
+/** @defgroup USART_DMA_Requests
+ * @{
+ */
+
+#define USART_DMAReq_Tx ((uint16_t)0x0080)
+#define USART_DMAReq_Rx ((uint16_t)0x0040)
+#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00))
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_WakeUp_methods
+ * @{
+ */
+
+#define USART_WakeUp_IdleLine ((uint16_t)0x0000)
+#define USART_WakeUp_AddressMark ((uint16_t)0x0800)
+#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \
+ ((WAKEUP) == USART_WakeUp_AddressMark))
+/**
+ * @}
+ */
+
+/** @defgroup USART_LIN_Break_Detection_Length
+ * @{
+ */
+
+#define USART_LINBreakDetectLength_10b ((uint16_t)0x0000)
+#define USART_LINBreakDetectLength_11b ((uint16_t)0x0020)
+#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \
+ (((LENGTH) == USART_LINBreakDetectLength_10b) || \
+ ((LENGTH) == USART_LINBreakDetectLength_11b))
+/**
+ * @}
+ */
+
+/** @defgroup USART_IrDA_Low_Power
+ * @{
+ */
+
+#define USART_IrDAMode_LowPower ((uint16_t)0x0004)
+#define USART_IrDAMode_Normal ((uint16_t)0x0000)
+#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \
+ ((MODE) == USART_IrDAMode_Normal))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Flags
+ * @{
+ */
+
+#define USART_FLAG_CTS ((uint16_t)0x0200)
+#define USART_FLAG_LBD ((uint16_t)0x0100)
+#define USART_FLAG_TXE ((uint16_t)0x0080)
+#define USART_FLAG_TC ((uint16_t)0x0040)
+#define USART_FLAG_RXNE ((uint16_t)0x0020)
+#define USART_FLAG_IDLE ((uint16_t)0x0010)
+#define USART_FLAG_ORE ((uint16_t)0x0008)
+#define USART_FLAG_NE ((uint16_t)0x0004)
+#define USART_FLAG_FE ((uint16_t)0x0002)
+#define USART_FLAG_PE ((uint16_t)0x0001)
+#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \
+ ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \
+ ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \
+ ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \
+ ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE))
+
+#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00))
+#define IS_USART_PERIPH_FLAG(PERIPH, USART_FLAG) ((((*(uint32_t*)&(PERIPH)) != UART4_BASE) &&\
+ ((*(uint32_t*)&(PERIPH)) != UART5_BASE)) \
+ || ((USART_FLAG) != USART_FLAG_CTS))
+#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x0044AA21))
+#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF)
+#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Exported_Functions
+ * @{
+ */
+
+void USART_DeInit(USART_TypeDef* USARTx);
+void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct);
+void USART_StructInit(USART_InitTypeDef* USART_InitStruct);
+void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct);
+void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct);
+void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState);
+void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState);
+void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address);
+void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp);
+void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength);
+void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_SendData(USART_TypeDef* USARTx, uint16_t Data);
+uint16_t USART_ReceiveData(USART_TypeDef* USARTx);
+void USART_SendBreak(USART_TypeDef* USARTx);
+void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime);
+void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler);
+void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode);
+void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState);
+FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG);
+void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG);
+ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT);
+void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_USART_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_wwdg.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_wwdg.h
new file mode 100644
index 00000000..cd573da4
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/inc/stm32f10x_wwdg.h
@@ -0,0 +1,115 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_wwdg.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the WWDG firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_WWDG_H
+#define __STM32F10x_WWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup WWDG
+ * @{
+ */
+
+/** @defgroup WWDG_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Exported_Constants
+ * @{
+ */
+
+/** @defgroup WWDG_Prescaler
+ * @{
+ */
+
+#define WWDG_Prescaler_1 ((uint32_t)0x00000000)
+#define WWDG_Prescaler_2 ((uint32_t)0x00000080)
+#define WWDG_Prescaler_4 ((uint32_t)0x00000100)
+#define WWDG_Prescaler_8 ((uint32_t)0x00000180)
+#define IS_WWDG_PRESCALER(PRESCALER) (((PRESCALER) == WWDG_Prescaler_1) || \
+ ((PRESCALER) == WWDG_Prescaler_2) || \
+ ((PRESCALER) == WWDG_Prescaler_4) || \
+ ((PRESCALER) == WWDG_Prescaler_8))
+#define IS_WWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0x7F)
+#define IS_WWDG_COUNTER(COUNTER) (((COUNTER) >= 0x40) && ((COUNTER) <= 0x7F))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Exported_Functions
+ * @{
+ */
+
+void WWDG_DeInit(void);
+void WWDG_SetPrescaler(uint32_t WWDG_Prescaler);
+void WWDG_SetWindowValue(uint8_t WindowValue);
+void WWDG_EnableIT(void);
+void WWDG_SetCounter(uint8_t Counter);
+void WWDG_Enable(uint8_t Counter);
+FlagStatus WWDG_GetFlagStatus(void);
+void WWDG_ClearFlag(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_WWDG_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/misc.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/misc.c
new file mode 100644
index 00000000..ec9165f7
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/misc.c
@@ -0,0 +1,225 @@
+/**
+ ******************************************************************************
+ * @file misc.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the miscellaneous firmware functions (add-on
+ * to CMSIS functions).
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "misc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup MISC
+ * @brief MISC driver modules
+ * @{
+ */
+
+/** @defgroup MISC_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Private_Defines
+ * @{
+ */
+
+#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000)
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Configures the priority grouping: pre-emption priority and subpriority.
+ * @param NVIC_PriorityGroup: specifies the priority grouping bits length.
+ * This parameter can be one of the following values:
+ * @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority
+ * 4 bits for subpriority
+ * @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority
+ * 3 bits for subpriority
+ * @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority
+ * 2 bits for subpriority
+ * @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority
+ * 1 bits for subpriority
+ * @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority
+ * 0 bits for subpriority
+ * @retval None
+ */
+void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup));
+
+ /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */
+ SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup;
+}
+
+/**
+ * @brief Initializes the NVIC peripheral according to the specified
+ * parameters in the NVIC_InitStruct.
+ * @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains
+ * the configuration information for the specified NVIC peripheral.
+ * @retval None
+ */
+void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
+{
+ uint32_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F;
+
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd));
+ assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority));
+ assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority));
+
+ if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE)
+ {
+ /* Compute the Corresponding IRQ Priority --------------------------------*/
+ tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08;
+ tmppre = (0x4 - tmppriority);
+ tmpsub = tmpsub >> tmppriority;
+
+ tmppriority = (uint32_t)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre;
+ tmppriority |= NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub;
+ tmppriority = tmppriority << 0x04;
+
+ NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority;
+
+ /* Enable the Selected IRQ Channels --------------------------------------*/
+ NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
+ (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
+ }
+ else
+ {
+ /* Disable the Selected IRQ Channels -------------------------------------*/
+ NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
+ (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
+ }
+}
+
+/**
+ * @brief Sets the vector table location and Offset.
+ * @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory.
+ * This parameter can be one of the following values:
+ * @arg NVIC_VectTab_RAM
+ * @arg NVIC_VectTab_FLASH
+ * @param Offset: Vector Table base offset field. This value must be a multiple
+ * of 0x200.
+ * @retval None
+ */
+void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_VECTTAB(NVIC_VectTab));
+ assert_param(IS_NVIC_OFFSET(Offset));
+
+ SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80);
+}
+
+/**
+ * @brief Selects the condition for the system to enter low power mode.
+ * @param LowPowerMode: Specifies the new mode for the system to enter low power mode.
+ * This parameter can be one of the following values:
+ * @arg NVIC_LP_SEVONPEND
+ * @arg NVIC_LP_SLEEPDEEP
+ * @arg NVIC_LP_SLEEPONEXIT
+ * @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_LP(LowPowerMode));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ SCB->SCR |= LowPowerMode;
+ }
+ else
+ {
+ SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode);
+ }
+}
+
+/**
+ * @brief Configures the SysTick clock source.
+ * @param SysTick_CLKSource: specifies the SysTick clock source.
+ * This parameter can be one of the following values:
+ * @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source.
+ * @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source.
+ * @retval None
+ */
+void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource));
+ if (SysTick_CLKSource == SysTick_CLKSource_HCLK)
+ {
+ SysTick->CTRL |= SysTick_CLKSource_HCLK;
+ }
+ else
+ {
+ SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8;
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_adc.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_adc.c
new file mode 100644
index 00000000..916a096d
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_adc.c
@@ -0,0 +1,1307 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_adc.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the ADC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_adc.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup ADC
+ * @brief ADC driver modules
+ * @{
+ */
+
+/** @defgroup ADC_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Private_Defines
+ * @{
+ */
+
+/* ADC DISCNUM mask */
+#define CR1_DISCNUM_Reset ((uint32_t)0xFFFF1FFF)
+
+/* ADC DISCEN mask */
+#define CR1_DISCEN_Set ((uint32_t)0x00000800)
+#define CR1_DISCEN_Reset ((uint32_t)0xFFFFF7FF)
+
+/* ADC JAUTO mask */
+#define CR1_JAUTO_Set ((uint32_t)0x00000400)
+#define CR1_JAUTO_Reset ((uint32_t)0xFFFFFBFF)
+
+/* ADC JDISCEN mask */
+#define CR1_JDISCEN_Set ((uint32_t)0x00001000)
+#define CR1_JDISCEN_Reset ((uint32_t)0xFFFFEFFF)
+
+/* ADC AWDCH mask */
+#define CR1_AWDCH_Reset ((uint32_t)0xFFFFFFE0)
+
+/* ADC Analog watchdog enable mode mask */
+#define CR1_AWDMode_Reset ((uint32_t)0xFF3FFDFF)
+
+/* CR1 register Mask */
+#define CR1_CLEAR_Mask ((uint32_t)0xFFF0FEFF)
+
+/* ADC ADON mask */
+#define CR2_ADON_Set ((uint32_t)0x00000001)
+#define CR2_ADON_Reset ((uint32_t)0xFFFFFFFE)
+
+/* ADC DMA mask */
+#define CR2_DMA_Set ((uint32_t)0x00000100)
+#define CR2_DMA_Reset ((uint32_t)0xFFFFFEFF)
+
+/* ADC RSTCAL mask */
+#define CR2_RSTCAL_Set ((uint32_t)0x00000008)
+
+/* ADC CAL mask */
+#define CR2_CAL_Set ((uint32_t)0x00000004)
+
+/* ADC SWSTART mask */
+#define CR2_SWSTART_Set ((uint32_t)0x00400000)
+
+/* ADC EXTTRIG mask */
+#define CR2_EXTTRIG_Set ((uint32_t)0x00100000)
+#define CR2_EXTTRIG_Reset ((uint32_t)0xFFEFFFFF)
+
+/* ADC Software start mask */
+#define CR2_EXTTRIG_SWSTART_Set ((uint32_t)0x00500000)
+#define CR2_EXTTRIG_SWSTART_Reset ((uint32_t)0xFFAFFFFF)
+
+/* ADC JEXTSEL mask */
+#define CR2_JEXTSEL_Reset ((uint32_t)0xFFFF8FFF)
+
+/* ADC JEXTTRIG mask */
+#define CR2_JEXTTRIG_Set ((uint32_t)0x00008000)
+#define CR2_JEXTTRIG_Reset ((uint32_t)0xFFFF7FFF)
+
+/* ADC JSWSTART mask */
+#define CR2_JSWSTART_Set ((uint32_t)0x00200000)
+
+/* ADC injected software start mask */
+#define CR2_JEXTTRIG_JSWSTART_Set ((uint32_t)0x00208000)
+#define CR2_JEXTTRIG_JSWSTART_Reset ((uint32_t)0xFFDF7FFF)
+
+/* ADC TSPD mask */
+#define CR2_TSVREFE_Set ((uint32_t)0x00800000)
+#define CR2_TSVREFE_Reset ((uint32_t)0xFF7FFFFF)
+
+/* CR2 register Mask */
+#define CR2_CLEAR_Mask ((uint32_t)0xFFF1F7FD)
+
+/* ADC SQx mask */
+#define SQR3_SQ_Set ((uint32_t)0x0000001F)
+#define SQR2_SQ_Set ((uint32_t)0x0000001F)
+#define SQR1_SQ_Set ((uint32_t)0x0000001F)
+
+/* SQR1 register Mask */
+#define SQR1_CLEAR_Mask ((uint32_t)0xFF0FFFFF)
+
+/* ADC JSQx mask */
+#define JSQR_JSQ_Set ((uint32_t)0x0000001F)
+
+/* ADC JL mask */
+#define JSQR_JL_Set ((uint32_t)0x00300000)
+#define JSQR_JL_Reset ((uint32_t)0xFFCFFFFF)
+
+/* ADC SMPx mask */
+#define SMPR1_SMP_Set ((uint32_t)0x00000007)
+#define SMPR2_SMP_Set ((uint32_t)0x00000007)
+
+/* ADC JDRx registers offset */
+#define JDR_Offset ((uint8_t)0x28)
+
+/* ADC1 DR register base address */
+#define DR_ADDRESS ((uint32_t)0x4001244C)
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the ADCx peripheral registers to their default reset values.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval None
+ */
+void ADC_DeInit(ADC_TypeDef* ADCx)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+
+ if (ADCx == ADC1)
+ {
+ /* Enable ADC1 reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, ENABLE);
+ /* Release ADC1 from reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, DISABLE);
+ }
+ else if (ADCx == ADC2)
+ {
+ /* Enable ADC2 reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, ENABLE);
+ /* Release ADC2 from reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, DISABLE);
+ }
+ else
+ {
+ if (ADCx == ADC3)
+ {
+ /* Enable ADC3 reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, ENABLE);
+ /* Release ADC3 from reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, DISABLE);
+ }
+ }
+}
+
+/**
+ * @brief Initializes the ADCx peripheral according to the specified parameters
+ * in the ADC_InitStruct.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure that contains
+ * the configuration information for the specified ADC peripheral.
+ * @retval None
+ */
+void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct)
+{
+ uint32_t tmpreg1 = 0;
+ uint8_t tmpreg2 = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_MODE(ADC_InitStruct->ADC_Mode));
+ assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ScanConvMode));
+ assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ContinuousConvMode));
+ assert_param(IS_ADC_EXT_TRIG(ADC_InitStruct->ADC_ExternalTrigConv));
+ assert_param(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign));
+ assert_param(IS_ADC_REGULAR_LENGTH(ADC_InitStruct->ADC_NbrOfChannel));
+
+ /*---------------------------- ADCx CR1 Configuration -----------------*/
+ /* Get the ADCx CR1 value */
+ tmpreg1 = ADCx->CR1;
+ /* Clear DUALMOD and SCAN bits */
+ tmpreg1 &= CR1_CLEAR_Mask;
+ /* Configure ADCx: Dual mode and scan conversion mode */
+ /* Set DUALMOD bits according to ADC_Mode value */
+ /* Set SCAN bit according to ADC_ScanConvMode value */
+ tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_Mode | ((uint32_t)ADC_InitStruct->ADC_ScanConvMode << 8));
+ /* Write to ADCx CR1 */
+ ADCx->CR1 = tmpreg1;
+
+ /*---------------------------- ADCx CR2 Configuration -----------------*/
+ /* Get the ADCx CR2 value */
+ tmpreg1 = ADCx->CR2;
+ /* Clear CONT, ALIGN and EXTSEL bits */
+ tmpreg1 &= CR2_CLEAR_Mask;
+ /* Configure ADCx: external trigger event and continuous conversion mode */
+ /* Set ALIGN bit according to ADC_DataAlign value */
+ /* Set EXTSEL bits according to ADC_ExternalTrigConv value */
+ /* Set CONT bit according to ADC_ContinuousConvMode value */
+ tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ExternalTrigConv |
+ ((uint32_t)ADC_InitStruct->ADC_ContinuousConvMode << 1));
+ /* Write to ADCx CR2 */
+ ADCx->CR2 = tmpreg1;
+
+ /*---------------------------- ADCx SQR1 Configuration -----------------*/
+ /* Get the ADCx SQR1 value */
+ tmpreg1 = ADCx->SQR1;
+ /* Clear L bits */
+ tmpreg1 &= SQR1_CLEAR_Mask;
+ /* Configure ADCx: regular channel sequence length */
+ /* Set L bits according to ADC_NbrOfChannel value */
+ tmpreg2 |= (uint8_t) (ADC_InitStruct->ADC_NbrOfChannel - (uint8_t)1);
+ tmpreg1 |= (uint32_t)tmpreg2 << 20;
+ /* Write to ADCx SQR1 */
+ ADCx->SQR1 = tmpreg1;
+}
+
+/**
+ * @brief Fills each ADC_InitStruct member with its default value.
+ * @param ADC_InitStruct : pointer to an ADC_InitTypeDef structure which will be initialized.
+ * @retval None
+ */
+void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct)
+{
+ /* Reset ADC init structure parameters values */
+ /* Initialize the ADC_Mode member */
+ ADC_InitStruct->ADC_Mode = ADC_Mode_Independent;
+ /* initialize the ADC_ScanConvMode member */
+ ADC_InitStruct->ADC_ScanConvMode = DISABLE;
+ /* Initialize the ADC_ContinuousConvMode member */
+ ADC_InitStruct->ADC_ContinuousConvMode = DISABLE;
+ /* Initialize the ADC_ExternalTrigConv member */
+ ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1;
+ /* Initialize the ADC_DataAlign member */
+ ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right;
+ /* Initialize the ADC_NbrOfChannel member */
+ ADC_InitStruct->ADC_NbrOfChannel = 1;
+}
+
+/**
+ * @brief Enables or disables the specified ADC peripheral.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the ADCx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the ADON bit to wake up the ADC from power down mode */
+ ADCx->CR2 |= CR2_ADON_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC peripheral */
+ ADCx->CR2 &= CR2_ADON_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified ADC DMA request.
+ * @param ADCx: where x can be 1 or 3 to select the ADC peripheral.
+ * Note: ADC2 hasn't a DMA capability.
+ * @param NewState: new state of the selected ADC DMA transfer.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_DMA_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC DMA request */
+ ADCx->CR2 |= CR2_DMA_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC DMA request */
+ ADCx->CR2 &= CR2_DMA_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified ADC interrupts.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_IT: specifies the ADC interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg ADC_IT_EOC: End of conversion interrupt mask
+ * @arg ADC_IT_AWD: Analog watchdog interrupt mask
+ * @arg ADC_IT_JEOC: End of injected conversion interrupt mask
+ * @param NewState: new state of the specified ADC interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState)
+{
+ uint8_t itmask = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ assert_param(IS_ADC_IT(ADC_IT));
+ /* Get the ADC IT index */
+ itmask = (uint8_t)ADC_IT;
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC interrupts */
+ ADCx->CR1 |= itmask;
+ }
+ else
+ {
+ /* Disable the selected ADC interrupts */
+ ADCx->CR1 &= (~(uint32_t)itmask);
+ }
+}
+
+/**
+ * @brief Resets the selected ADC calibration registers.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval None
+ */
+void ADC_ResetCalibration(ADC_TypeDef* ADCx)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Resets the selected ADC calibration registers */
+ ADCx->CR2 |= CR2_RSTCAL_Set;
+}
+
+/**
+ * @brief Gets the selected ADC reset calibration registers status.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval The new state of ADC reset calibration registers (SET or RESET).
+ */
+FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Check the status of RSTCAL bit */
+ if ((ADCx->CR2 & CR2_RSTCAL_Set) != (uint32_t)RESET)
+ {
+ /* RSTCAL bit is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* RSTCAL bit is reset */
+ bitstatus = RESET;
+ }
+ /* Return the RSTCAL bit status */
+ return bitstatus;
+}
+
+/**
+ * @brief Starts the selected ADC calibration process.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval None
+ */
+void ADC_StartCalibration(ADC_TypeDef* ADCx)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Enable the selected ADC calibration process */
+ ADCx->CR2 |= CR2_CAL_Set;
+}
+
+/**
+ * @brief Gets the selected ADC calibration status.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval The new state of ADC calibration (SET or RESET).
+ */
+FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Check the status of CAL bit */
+ if ((ADCx->CR2 & CR2_CAL_Set) != (uint32_t)RESET)
+ {
+ /* CAL bit is set: calibration on going */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CAL bit is reset: end of calibration */
+ bitstatus = RESET;
+ }
+ /* Return the CAL bit status */
+ return bitstatus;
+}
+
+/**
+ * @brief Enables or disables the selected ADC software start conversion .
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC software start conversion.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC conversion on external event and start the selected
+ ADC conversion */
+ ADCx->CR2 |= CR2_EXTTRIG_SWSTART_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC conversion on external event and stop the selected
+ ADC conversion */
+ ADCx->CR2 &= CR2_EXTTRIG_SWSTART_Reset;
+ }
+}
+
+/**
+ * @brief Gets the selected ADC Software start conversion Status.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval The new state of ADC software start conversion (SET or RESET).
+ */
+FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Check the status of SWSTART bit */
+ if ((ADCx->CR2 & CR2_SWSTART_Set) != (uint32_t)RESET)
+ {
+ /* SWSTART bit is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* SWSTART bit is reset */
+ bitstatus = RESET;
+ }
+ /* Return the SWSTART bit status */
+ return bitstatus;
+}
+
+/**
+ * @brief Configures the discontinuous mode for the selected ADC regular
+ * group channel.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param Number: specifies the discontinuous mode regular channel
+ * count value. This number must be between 1 and 8.
+ * @retval None
+ */
+void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number)
+{
+ uint32_t tmpreg1 = 0;
+ uint32_t tmpreg2 = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_REGULAR_DISC_NUMBER(Number));
+ /* Get the old register value */
+ tmpreg1 = ADCx->CR1;
+ /* Clear the old discontinuous mode channel count */
+ tmpreg1 &= CR1_DISCNUM_Reset;
+ /* Set the discontinuous mode channel count */
+ tmpreg2 = Number - 1;
+ tmpreg1 |= tmpreg2 << 13;
+ /* Store the new register value */
+ ADCx->CR1 = tmpreg1;
+}
+
+/**
+ * @brief Enables or disables the discontinuous mode on regular group
+ * channel for the specified ADC
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC discontinuous mode
+ * on regular group channel.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC regular discontinuous mode */
+ ADCx->CR1 |= CR1_DISCEN_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC regular discontinuous mode */
+ ADCx->CR1 &= CR1_DISCEN_Reset;
+ }
+}
+
+/**
+ * @brief Configures for the selected ADC regular channel its corresponding
+ * rank in the sequencer and its sample time.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_Channel: the ADC channel to configure.
+ * This parameter can be one of the following values:
+ * @arg ADC_Channel_0: ADC Channel0 selected
+ * @arg ADC_Channel_1: ADC Channel1 selected
+ * @arg ADC_Channel_2: ADC Channel2 selected
+ * @arg ADC_Channel_3: ADC Channel3 selected
+ * @arg ADC_Channel_4: ADC Channel4 selected
+ * @arg ADC_Channel_5: ADC Channel5 selected
+ * @arg ADC_Channel_6: ADC Channel6 selected
+ * @arg ADC_Channel_7: ADC Channel7 selected
+ * @arg ADC_Channel_8: ADC Channel8 selected
+ * @arg ADC_Channel_9: ADC Channel9 selected
+ * @arg ADC_Channel_10: ADC Channel10 selected
+ * @arg ADC_Channel_11: ADC Channel11 selected
+ * @arg ADC_Channel_12: ADC Channel12 selected
+ * @arg ADC_Channel_13: ADC Channel13 selected
+ * @arg ADC_Channel_14: ADC Channel14 selected
+ * @arg ADC_Channel_15: ADC Channel15 selected
+ * @arg ADC_Channel_16: ADC Channel16 selected
+ * @arg ADC_Channel_17: ADC Channel17 selected
+ * @param Rank: The rank in the regular group sequencer. This parameter must be between 1 to 16.
+ * @param ADC_SampleTime: The sample time value to be set for the selected channel.
+ * This parameter can be one of the following values:
+ * @arg ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles
+ * @arg ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles
+ * @arg ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles
+ * @arg ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles
+ * @arg ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles
+ * @arg ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles
+ * @arg ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles
+ * @arg ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles
+ * @retval None
+ */
+void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
+{
+ uint32_t tmpreg1 = 0, tmpreg2 = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_CHANNEL(ADC_Channel));
+ assert_param(IS_ADC_REGULAR_RANK(Rank));
+ assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime));
+ /* if ADC_Channel_10 ... ADC_Channel_17 is selected */
+ if (ADC_Channel > ADC_Channel_9)
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SMPR1;
+ /* Calculate the mask to clear */
+ tmpreg2 = SMPR1_SMP_Set << (3 * (ADC_Channel - 10));
+ /* Clear the old channel sample time */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 10));
+ /* Set the new channel sample time */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SMPR1 = tmpreg1;
+ }
+ else /* ADC_Channel include in ADC_Channel_[0..9] */
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SMPR2;
+ /* Calculate the mask to clear */
+ tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel);
+ /* Clear the old channel sample time */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel);
+ /* Set the new channel sample time */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SMPR2 = tmpreg1;
+ }
+ /* For Rank 1 to 6 */
+ if (Rank < 7)
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SQR3;
+ /* Calculate the mask to clear */
+ tmpreg2 = SQR3_SQ_Set << (5 * (Rank - 1));
+ /* Clear the old SQx bits for the selected rank */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 1));
+ /* Set the SQx bits for the selected rank */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SQR3 = tmpreg1;
+ }
+ /* For Rank 7 to 12 */
+ else if (Rank < 13)
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SQR2;
+ /* Calculate the mask to clear */
+ tmpreg2 = SQR2_SQ_Set << (5 * (Rank - 7));
+ /* Clear the old SQx bits for the selected rank */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 7));
+ /* Set the SQx bits for the selected rank */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SQR2 = tmpreg1;
+ }
+ /* For Rank 13 to 16 */
+ else
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SQR1;
+ /* Calculate the mask to clear */
+ tmpreg2 = SQR1_SQ_Set << (5 * (Rank - 13));
+ /* Clear the old SQx bits for the selected rank */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 13));
+ /* Set the SQx bits for the selected rank */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SQR1 = tmpreg1;
+ }
+}
+
+/**
+ * @brief Enables or disables the ADCx conversion through external trigger.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC external trigger start of conversion.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC conversion on external event */
+ ADCx->CR2 |= CR2_EXTTRIG_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC conversion on external event */
+ ADCx->CR2 &= CR2_EXTTRIG_Reset;
+ }
+}
+
+/**
+ * @brief Returns the last ADCx conversion result data for regular channel.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval The Data conversion value.
+ */
+uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Return the selected ADC conversion value */
+ return (uint16_t) ADCx->DR;
+}
+
+/**
+ * @brief Returns the last ADC1 and ADC2 conversion result data in dual mode.
+ * @retval The Data conversion value.
+ */
+uint32_t ADC_GetDualModeConversionValue(void)
+{
+ /* Return the dual mode conversion value */
+ return (*(__IO uint32_t *) DR_ADDRESS);
+}
+
+/**
+ * @brief Enables or disables the selected ADC automatic injected group
+ * conversion after regular one.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC auto injected conversion
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC automatic injected group conversion */
+ ADCx->CR1 |= CR1_JAUTO_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC automatic injected group conversion */
+ ADCx->CR1 &= CR1_JAUTO_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the discontinuous mode for injected group
+ * channel for the specified ADC
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC discontinuous mode
+ * on injected group channel.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC injected discontinuous mode */
+ ADCx->CR1 |= CR1_JDISCEN_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC injected discontinuous mode */
+ ADCx->CR1 &= CR1_JDISCEN_Reset;
+ }
+}
+
+/**
+ * @brief Configures the ADCx external trigger for injected channels conversion.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_ExternalTrigInjecConv: specifies the ADC trigger to start injected conversion.
+ * This parameter can be one of the following values:
+ * @arg ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event selected (for ADC1, ADC2 and ADC3)
+ * @arg ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture compare4 selected (for ADC1, ADC2 and ADC3)
+ * @arg ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event selected (for ADC1 and ADC2)
+ * @arg ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture compare1 selected (for ADC1 and ADC2)
+ * @arg ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture compare4 selected (for ADC1 and ADC2)
+ * @arg ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event selected (for ADC1 and ADC2)
+ * @arg ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4: External interrupt line 15 or Timer8
+ * capture compare4 event selected (for ADC1 and ADC2)
+ * @arg ADC_ExternalTrigInjecConv_T4_CC3: Timer4 capture compare3 selected (for ADC3 only)
+ * @arg ADC_ExternalTrigInjecConv_T8_CC2: Timer8 capture compare2 selected (for ADC3 only)
+ * @arg ADC_ExternalTrigInjecConv_T8_CC4: Timer8 capture compare4 selected (for ADC3 only)
+ * @arg ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event selected (for ADC3 only)
+ * @arg ADC_ExternalTrigInjecConv_T5_CC4: Timer5 capture compare4 selected (for ADC3 only)
+ * @arg ADC_ExternalTrigInjecConv_None: Injected conversion started by software and not
+ * by external trigger (for ADC1, ADC2 and ADC3)
+ * @retval None
+ */
+void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_EXT_INJEC_TRIG(ADC_ExternalTrigInjecConv));
+ /* Get the old register value */
+ tmpreg = ADCx->CR2;
+ /* Clear the old external event selection for injected group */
+ tmpreg &= CR2_JEXTSEL_Reset;
+ /* Set the external event selection for injected group */
+ tmpreg |= ADC_ExternalTrigInjecConv;
+ /* Store the new register value */
+ ADCx->CR2 = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the ADCx injected channels conversion through
+ * external trigger
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC external trigger start of
+ * injected conversion.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC external event selection for injected group */
+ ADCx->CR2 |= CR2_JEXTTRIG_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC external event selection for injected group */
+ ADCx->CR2 &= CR2_JEXTTRIG_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the selected ADC start of the injected
+ * channels conversion.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC software start injected conversion.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC conversion for injected group on external event and start the selected
+ ADC injected conversion */
+ ADCx->CR2 |= CR2_JEXTTRIG_JSWSTART_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC conversion on external event for injected group and stop the selected
+ ADC injected conversion */
+ ADCx->CR2 &= CR2_JEXTTRIG_JSWSTART_Reset;
+ }
+}
+
+/**
+ * @brief Gets the selected ADC Software start injected conversion Status.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval The new state of ADC software start injected conversion (SET or RESET).
+ */
+FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Check the status of JSWSTART bit */
+ if ((ADCx->CR2 & CR2_JSWSTART_Set) != (uint32_t)RESET)
+ {
+ /* JSWSTART bit is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* JSWSTART bit is reset */
+ bitstatus = RESET;
+ }
+ /* Return the JSWSTART bit status */
+ return bitstatus;
+}
+
+/**
+ * @brief Configures for the selected ADC injected channel its corresponding
+ * rank in the sequencer and its sample time.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_Channel: the ADC channel to configure.
+ * This parameter can be one of the following values:
+ * @arg ADC_Channel_0: ADC Channel0 selected
+ * @arg ADC_Channel_1: ADC Channel1 selected
+ * @arg ADC_Channel_2: ADC Channel2 selected
+ * @arg ADC_Channel_3: ADC Channel3 selected
+ * @arg ADC_Channel_4: ADC Channel4 selected
+ * @arg ADC_Channel_5: ADC Channel5 selected
+ * @arg ADC_Channel_6: ADC Channel6 selected
+ * @arg ADC_Channel_7: ADC Channel7 selected
+ * @arg ADC_Channel_8: ADC Channel8 selected
+ * @arg ADC_Channel_9: ADC Channel9 selected
+ * @arg ADC_Channel_10: ADC Channel10 selected
+ * @arg ADC_Channel_11: ADC Channel11 selected
+ * @arg ADC_Channel_12: ADC Channel12 selected
+ * @arg ADC_Channel_13: ADC Channel13 selected
+ * @arg ADC_Channel_14: ADC Channel14 selected
+ * @arg ADC_Channel_15: ADC Channel15 selected
+ * @arg ADC_Channel_16: ADC Channel16 selected
+ * @arg ADC_Channel_17: ADC Channel17 selected
+ * @param Rank: The rank in the injected group sequencer. This parameter must be between 1 and 4.
+ * @param ADC_SampleTime: The sample time value to be set for the selected channel.
+ * This parameter can be one of the following values:
+ * @arg ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles
+ * @arg ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles
+ * @arg ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles
+ * @arg ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles
+ * @arg ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles
+ * @arg ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles
+ * @arg ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles
+ * @arg ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles
+ * @retval None
+ */
+void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
+{
+ uint32_t tmpreg1 = 0, tmpreg2 = 0, tmpreg3 = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_CHANNEL(ADC_Channel));
+ assert_param(IS_ADC_INJECTED_RANK(Rank));
+ assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime));
+ /* if ADC_Channel_10 ... ADC_Channel_17 is selected */
+ if (ADC_Channel > ADC_Channel_9)
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SMPR1;
+ /* Calculate the mask to clear */
+ tmpreg2 = SMPR1_SMP_Set << (3*(ADC_Channel - 10));
+ /* Clear the old channel sample time */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_SampleTime << (3*(ADC_Channel - 10));
+ /* Set the new channel sample time */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SMPR1 = tmpreg1;
+ }
+ else /* ADC_Channel include in ADC_Channel_[0..9] */
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SMPR2;
+ /* Calculate the mask to clear */
+ tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel);
+ /* Clear the old channel sample time */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel);
+ /* Set the new channel sample time */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SMPR2 = tmpreg1;
+ }
+ /* Rank configuration */
+ /* Get the old register value */
+ tmpreg1 = ADCx->JSQR;
+ /* Get JL value: Number = JL+1 */
+ tmpreg3 = (tmpreg1 & JSQR_JL_Set)>> 20;
+ /* Calculate the mask to clear: ((Rank-1)+(4-JL-1)) */
+ tmpreg2 = JSQR_JSQ_Set << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1)));
+ /* Clear the old JSQx bits for the selected rank */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set: ((Rank-1)+(4-JL-1)) */
+ tmpreg2 = (uint32_t)ADC_Channel << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1)));
+ /* Set the JSQx bits for the selected rank */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->JSQR = tmpreg1;
+}
+
+/**
+ * @brief Configures the sequencer length for injected channels
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param Length: The sequencer length.
+ * This parameter must be a number between 1 to 4.
+ * @retval None
+ */
+void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length)
+{
+ uint32_t tmpreg1 = 0;
+ uint32_t tmpreg2 = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_INJECTED_LENGTH(Length));
+
+ /* Get the old register value */
+ tmpreg1 = ADCx->JSQR;
+ /* Clear the old injected sequnence lenght JL bits */
+ tmpreg1 &= JSQR_JL_Reset;
+ /* Set the injected sequnence lenght JL bits */
+ tmpreg2 = Length - 1;
+ tmpreg1 |= tmpreg2 << 20;
+ /* Store the new register value */
+ ADCx->JSQR = tmpreg1;
+}
+
+/**
+ * @brief Set the injected channels conversion value offset
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_InjectedChannel: the ADC injected channel to set its offset.
+ * This parameter can be one of the following values:
+ * @arg ADC_InjectedChannel_1: Injected Channel1 selected
+ * @arg ADC_InjectedChannel_2: Injected Channel2 selected
+ * @arg ADC_InjectedChannel_3: Injected Channel3 selected
+ * @arg ADC_InjectedChannel_4: Injected Channel4 selected
+ * @param Offset: the offset value for the selected ADC injected channel
+ * This parameter must be a 12bit value.
+ * @retval None
+ */
+void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel));
+ assert_param(IS_ADC_OFFSET(Offset));
+
+ tmp = (uint32_t)ADCx;
+ tmp += ADC_InjectedChannel;
+
+ /* Set the selected injected channel data offset */
+ *(__IO uint32_t *) tmp = (uint32_t)Offset;
+}
+
+/**
+ * @brief Returns the ADC injected channel conversion result
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_InjectedChannel: the converted ADC injected channel.
+ * This parameter can be one of the following values:
+ * @arg ADC_InjectedChannel_1: Injected Channel1 selected
+ * @arg ADC_InjectedChannel_2: Injected Channel2 selected
+ * @arg ADC_InjectedChannel_3: Injected Channel3 selected
+ * @arg ADC_InjectedChannel_4: Injected Channel4 selected
+ * @retval The Data conversion value.
+ */
+uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel));
+
+ tmp = (uint32_t)ADCx;
+ tmp += ADC_InjectedChannel + JDR_Offset;
+
+ /* Returns the selected injected channel conversion data value */
+ return (uint16_t) (*(__IO uint32_t*) tmp);
+}
+
+/**
+ * @brief Enables or disables the analog watchdog on single/all regular
+ * or injected channels
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_AnalogWatchdog: the ADC analog watchdog configuration.
+ * This parameter can be one of the following values:
+ * @arg ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on a single regular channel
+ * @arg ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on a single injected channel
+ * @arg ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog watchdog on a single regular or injected channel
+ * @arg ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on all regular channel
+ * @arg ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on all injected channel
+ * @arg ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog on all regular and injected channels
+ * @arg ADC_AnalogWatchdog_None: No channel guarded by the analog watchdog
+ * @retval None
+ */
+void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_ANALOG_WATCHDOG(ADC_AnalogWatchdog));
+ /* Get the old register value */
+ tmpreg = ADCx->CR1;
+ /* Clear AWDEN, AWDENJ and AWDSGL bits */
+ tmpreg &= CR1_AWDMode_Reset;
+ /* Set the analog watchdog enable mode */
+ tmpreg |= ADC_AnalogWatchdog;
+ /* Store the new register value */
+ ADCx->CR1 = tmpreg;
+}
+
+/**
+ * @brief Configures the high and low thresholds of the analog watchdog.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param HighThreshold: the ADC analog watchdog High threshold value.
+ * This parameter must be a 12bit value.
+ * @param LowThreshold: the ADC analog watchdog Low threshold value.
+ * This parameter must be a 12bit value.
+ * @retval None
+ */
+void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold,
+ uint16_t LowThreshold)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_THRESHOLD(HighThreshold));
+ assert_param(IS_ADC_THRESHOLD(LowThreshold));
+ /* Set the ADCx high threshold */
+ ADCx->HTR = HighThreshold;
+ /* Set the ADCx low threshold */
+ ADCx->LTR = LowThreshold;
+}
+
+/**
+ * @brief Configures the analog watchdog guarded single channel
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_Channel: the ADC channel to configure for the analog watchdog.
+ * This parameter can be one of the following values:
+ * @arg ADC_Channel_0: ADC Channel0 selected
+ * @arg ADC_Channel_1: ADC Channel1 selected
+ * @arg ADC_Channel_2: ADC Channel2 selected
+ * @arg ADC_Channel_3: ADC Channel3 selected
+ * @arg ADC_Channel_4: ADC Channel4 selected
+ * @arg ADC_Channel_5: ADC Channel5 selected
+ * @arg ADC_Channel_6: ADC Channel6 selected
+ * @arg ADC_Channel_7: ADC Channel7 selected
+ * @arg ADC_Channel_8: ADC Channel8 selected
+ * @arg ADC_Channel_9: ADC Channel9 selected
+ * @arg ADC_Channel_10: ADC Channel10 selected
+ * @arg ADC_Channel_11: ADC Channel11 selected
+ * @arg ADC_Channel_12: ADC Channel12 selected
+ * @arg ADC_Channel_13: ADC Channel13 selected
+ * @arg ADC_Channel_14: ADC Channel14 selected
+ * @arg ADC_Channel_15: ADC Channel15 selected
+ * @arg ADC_Channel_16: ADC Channel16 selected
+ * @arg ADC_Channel_17: ADC Channel17 selected
+ * @retval None
+ */
+void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_CHANNEL(ADC_Channel));
+ /* Get the old register value */
+ tmpreg = ADCx->CR1;
+ /* Clear the Analog watchdog channel select bits */
+ tmpreg &= CR1_AWDCH_Reset;
+ /* Set the Analog watchdog channel */
+ tmpreg |= ADC_Channel;
+ /* Store the new register value */
+ ADCx->CR1 = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the temperature sensor and Vrefint channel.
+ * @param NewState: new state of the temperature sensor.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_TempSensorVrefintCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the temperature sensor and Vrefint channel*/
+ ADC1->CR2 |= CR2_TSVREFE_Set;
+ }
+ else
+ {
+ /* Disable the temperature sensor and Vrefint channel*/
+ ADC1->CR2 &= CR2_TSVREFE_Reset;
+ }
+}
+
+/**
+ * @brief Checks whether the specified ADC flag is set or not.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg ADC_FLAG_AWD: Analog watchdog flag
+ * @arg ADC_FLAG_EOC: End of conversion flag
+ * @arg ADC_FLAG_JEOC: End of injected group conversion flag
+ * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag
+ * @arg ADC_FLAG_STRT: Start of regular group conversion flag
+ * @retval The new state of ADC_FLAG (SET or RESET).
+ */
+FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_GET_FLAG(ADC_FLAG));
+ /* Check the status of the specified ADC flag */
+ if ((ADCx->SR & ADC_FLAG) != (uint8_t)RESET)
+ {
+ /* ADC_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* ADC_FLAG is reset */
+ bitstatus = RESET;
+ }
+ /* Return the ADC_FLAG status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the ADCx's pending flags.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_FLAG: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg ADC_FLAG_AWD: Analog watchdog flag
+ * @arg ADC_FLAG_EOC: End of conversion flag
+ * @arg ADC_FLAG_JEOC: End of injected group conversion flag
+ * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag
+ * @arg ADC_FLAG_STRT: Start of regular group conversion flag
+ * @retval None
+ */
+void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_CLEAR_FLAG(ADC_FLAG));
+ /* Clear the selected ADC flags */
+ ADCx->SR = ~(uint32_t)ADC_FLAG;
+}
+
+/**
+ * @brief Checks whether the specified ADC interrupt has occurred or not.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_IT: specifies the ADC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg ADC_IT_EOC: End of conversion interrupt mask
+ * @arg ADC_IT_AWD: Analog watchdog interrupt mask
+ * @arg ADC_IT_JEOC: End of injected conversion interrupt mask
+ * @retval The new state of ADC_IT (SET or RESET).
+ */
+ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t itmask = 0, enablestatus = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_GET_IT(ADC_IT));
+ /* Get the ADC IT index */
+ itmask = ADC_IT >> 8;
+ /* Get the ADC_IT enable bit status */
+ enablestatus = (ADCx->CR1 & (uint8_t)ADC_IT) ;
+ /* Check the status of the specified ADC interrupt */
+ if (((ADCx->SR & itmask) != (uint32_t)RESET) && enablestatus)
+ {
+ /* ADC_IT is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* ADC_IT is reset */
+ bitstatus = RESET;
+ }
+ /* Return the ADC_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the ADCx's interrupt pending bits.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_IT: specifies the ADC interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg ADC_IT_EOC: End of conversion interrupt mask
+ * @arg ADC_IT_AWD: Analog watchdog interrupt mask
+ * @arg ADC_IT_JEOC: End of injected conversion interrupt mask
+ * @retval None
+ */
+void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT)
+{
+ uint8_t itmask = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_IT(ADC_IT));
+ /* Get the ADC IT index */
+ itmask = (uint8_t)(ADC_IT >> 8);
+ /* Clear the selected ADC interrupt pending bits */
+ ADCx->SR = ~(uint32_t)itmask;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_bkp.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_bkp.c
new file mode 100644
index 00000000..3004b9ef
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_bkp.c
@@ -0,0 +1,308 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_bkp.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the BKP firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_bkp.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup BKP
+ * @brief BKP driver modules
+ * @{
+ */
+
+/** @defgroup BKP_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Private_Defines
+ * @{
+ */
+
+/* ------------ BKP registers bit address in the alias region --------------- */
+#define BKP_OFFSET (BKP_BASE - PERIPH_BASE)
+
+/* --- CR Register ----*/
+
+/* Alias word address of TPAL bit */
+#define CR_OFFSET (BKP_OFFSET + 0x30)
+#define TPAL_BitNumber 0x01
+#define CR_TPAL_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPAL_BitNumber * 4))
+
+/* Alias word address of TPE bit */
+#define TPE_BitNumber 0x00
+#define CR_TPE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPE_BitNumber * 4))
+
+/* --- CSR Register ---*/
+
+/* Alias word address of TPIE bit */
+#define CSR_OFFSET (BKP_OFFSET + 0x34)
+#define TPIE_BitNumber 0x02
+#define CSR_TPIE_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TPIE_BitNumber * 4))
+
+/* Alias word address of TIF bit */
+#define TIF_BitNumber 0x09
+#define CSR_TIF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TIF_BitNumber * 4))
+
+/* Alias word address of TEF bit */
+#define TEF_BitNumber 0x08
+#define CSR_TEF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEF_BitNumber * 4))
+
+/* ---------------------- BKP registers bit mask ------------------------ */
+
+/* RTCCR register bit mask */
+#define RTCCR_CAL_MASK ((uint16_t)0xFF80)
+#define RTCCR_MASK ((uint16_t)0xFC7F)
+
+/**
+ * @}
+ */
+
+
+/** @defgroup BKP_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the BKP peripheral registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void BKP_DeInit(void)
+{
+ RCC_BackupResetCmd(ENABLE);
+ RCC_BackupResetCmd(DISABLE);
+}
+
+/**
+ * @brief Configures the Tamper Pin active level.
+ * @param BKP_TamperPinLevel: specifies the Tamper Pin active level.
+ * This parameter can be one of the following values:
+ * @arg BKP_TamperPinLevel_High: Tamper pin active on high level
+ * @arg BKP_TamperPinLevel_Low: Tamper pin active on low level
+ * @retval None
+ */
+void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel)
+{
+ /* Check the parameters */
+ assert_param(IS_BKP_TAMPER_PIN_LEVEL(BKP_TamperPinLevel));
+ *(__IO uint32_t *) CR_TPAL_BB = BKP_TamperPinLevel;
+}
+
+/**
+ * @brief Enables or disables the Tamper Pin activation.
+ * @param NewState: new state of the Tamper Pin activation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void BKP_TamperPinCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_TPE_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enables or disables the Tamper Pin Interrupt.
+ * @param NewState: new state of the Tamper Pin Interrupt.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void BKP_ITConfig(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CSR_TPIE_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Select the RTC output source to output on the Tamper pin.
+ * @param BKP_RTCOutputSource: specifies the RTC output source.
+ * This parameter can be one of the following values:
+ * @arg BKP_RTCOutputSource_None: no RTC output on the Tamper pin.
+ * @arg BKP_RTCOutputSource_CalibClock: output the RTC clock with frequency
+ * divided by 64 on the Tamper pin.
+ * @arg BKP_RTCOutputSource_Alarm: output the RTC Alarm pulse signal on
+ * the Tamper pin.
+ * @arg BKP_RTCOutputSource_Second: output the RTC Second pulse signal on
+ * the Tamper pin.
+ * @retval None
+ */
+void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource)
+{
+ uint16_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_BKP_RTC_OUTPUT_SOURCE(BKP_RTCOutputSource));
+ tmpreg = BKP->RTCCR;
+ /* Clear CCO, ASOE and ASOS bits */
+ tmpreg &= RTCCR_MASK;
+
+ /* Set CCO, ASOE and ASOS bits according to BKP_RTCOutputSource value */
+ tmpreg |= BKP_RTCOutputSource;
+ /* Store the new value */
+ BKP->RTCCR = tmpreg;
+}
+
+/**
+ * @brief Sets RTC Clock Calibration value.
+ * @param CalibrationValue: specifies the RTC Clock Calibration value.
+ * This parameter must be a number between 0 and 0x7F.
+ * @retval None
+ */
+void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue)
+{
+ uint16_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_BKP_CALIBRATION_VALUE(CalibrationValue));
+ tmpreg = BKP->RTCCR;
+ /* Clear CAL[6:0] bits */
+ tmpreg &= RTCCR_CAL_MASK;
+ /* Set CAL[6:0] bits according to CalibrationValue value */
+ tmpreg |= CalibrationValue;
+ /* Store the new value */
+ BKP->RTCCR = tmpreg;
+}
+
+/**
+ * @brief Writes user data to the specified Data Backup Register.
+ * @param BKP_DR: specifies the Data Backup Register.
+ * This parameter can be BKP_DRx where x:[1, 42]
+ * @param Data: data to write
+ * @retval None
+ */
+void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_BKP_DR(BKP_DR));
+
+ tmp = (uint32_t)BKP_BASE;
+ tmp += BKP_DR;
+
+ *(__IO uint32_t *) tmp = Data;
+}
+
+/**
+ * @brief Reads data from the specified Data Backup Register.
+ * @param BKP_DR: specifies the Data Backup Register.
+ * This parameter can be BKP_DRx where x:[1, 42]
+ * @retval The content of the specified Data Backup Register
+ */
+uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_BKP_DR(BKP_DR));
+
+ tmp = (uint32_t)BKP_BASE;
+ tmp += BKP_DR;
+
+ return (*(__IO uint16_t *) tmp);
+}
+
+/**
+ * @brief Checks whether the Tamper Pin Event flag is set or not.
+ * @param None
+ * @retval The new state of the Tamper Pin Event flag (SET or RESET).
+ */
+FlagStatus BKP_GetFlagStatus(void)
+{
+ return (FlagStatus)(*(__IO uint32_t *) CSR_TEF_BB);
+}
+
+/**
+ * @brief Clears Tamper Pin Event pending flag.
+ * @param None
+ * @retval None
+ */
+void BKP_ClearFlag(void)
+{
+ /* Set CTE bit to clear Tamper Pin Event flag */
+ BKP->CSR |= BKP_CSR_CTE;
+}
+
+/**
+ * @brief Checks whether the Tamper Pin Interrupt has occurred or not.
+ * @param None
+ * @retval The new state of the Tamper Pin Interrupt (SET or RESET).
+ */
+ITStatus BKP_GetITStatus(void)
+{
+ return (ITStatus)(*(__IO uint32_t *) CSR_TIF_BB);
+}
+
+/**
+ * @brief Clears Tamper Pin Interrupt pending bit.
+ * @param None
+ * @retval None
+ */
+void BKP_ClearITPendingBit(void)
+{
+ /* Set CTI bit to clear Tamper Pin Interrupt pending bit */
+ BKP->CSR |= BKP_CSR_CTI;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_can.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_can.c
new file mode 100644
index 00000000..607d6924
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_can.c
@@ -0,0 +1,1415 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_can.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the CAN firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_can.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup CAN
+ * @brief CAN driver modules
+ * @{
+ */
+
+/** @defgroup CAN_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Private_Defines
+ * @{
+ */
+
+/* CAN Master Control Register bits */
+
+#define MCR_DBF ((uint32_t)0x00010000) /* software master reset */
+
+/* CAN Mailbox Transmit Request */
+#define TMIDxR_TXRQ ((uint32_t)0x00000001) /* Transmit mailbox request */
+
+/* CAN Filter Master Register bits */
+#define FMR_FINIT ((uint32_t)0x00000001) /* Filter init mode */
+
+/* Time out for INAK bit */
+#define INAK_TIMEOUT ((uint32_t)0x0000FFFF)
+/* Time out for SLAK bit */
+#define SLAK_TIMEOUT ((uint32_t)0x0000FFFF)
+
+
+
+/* Flags in TSR register */
+#define CAN_FLAGS_TSR ((uint32_t)0x08000000)
+/* Flags in RF1R register */
+#define CAN_FLAGS_RF1R ((uint32_t)0x04000000)
+/* Flags in RF0R register */
+#define CAN_FLAGS_RF0R ((uint32_t)0x02000000)
+/* Flags in MSR register */
+#define CAN_FLAGS_MSR ((uint32_t)0x01000000)
+/* Flags in ESR register */
+#define CAN_FLAGS_ESR ((uint32_t)0x00F00000)
+
+/* Mailboxes definition */
+#define CAN_TXMAILBOX_0 ((uint8_t)0x00)
+#define CAN_TXMAILBOX_1 ((uint8_t)0x01)
+#define CAN_TXMAILBOX_2 ((uint8_t)0x02)
+
+
+
+#define CAN_MODE_MASK ((uint32_t) 0x00000003)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Private_FunctionPrototypes
+ * @{
+ */
+
+static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit);
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the CAN peripheral registers to their default reset values.
+ * @param CANx: where x can be 1 or 2 to select the CAN peripheral.
+ * @retval None.
+ */
+void CAN_DeInit(CAN_TypeDef* CANx)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+
+ if (CANx == CAN1)
+ {
+ /* Enable CAN1 reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, ENABLE);
+ /* Release CAN1 from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, DISABLE);
+ }
+ else
+ {
+ /* Enable CAN2 reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, ENABLE);
+ /* Release CAN2 from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, DISABLE);
+ }
+}
+
+/**
+ * @brief Initializes the CAN peripheral according to the specified
+ * parameters in the CAN_InitStruct.
+ * @param CANx: where x can be 1 or 2 to to select the CAN
+ * peripheral.
+ * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure that
+ * contains the configuration information for the
+ * CAN peripheral.
+ * @retval Constant indicates initialization succeed which will be
+ * CAN_InitStatus_Failed or CAN_InitStatus_Success.
+ */
+uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct)
+{
+ uint8_t InitStatus = CAN_InitStatus_Failed;
+ uint32_t wait_ack = 0x00000000;
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TTCM));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_ABOM));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_AWUM));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_NART));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_RFLM));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TXFP));
+ assert_param(IS_CAN_MODE(CAN_InitStruct->CAN_Mode));
+ assert_param(IS_CAN_SJW(CAN_InitStruct->CAN_SJW));
+ assert_param(IS_CAN_BS1(CAN_InitStruct->CAN_BS1));
+ assert_param(IS_CAN_BS2(CAN_InitStruct->CAN_BS2));
+ assert_param(IS_CAN_PRESCALER(CAN_InitStruct->CAN_Prescaler));
+
+ /* Exit from sleep mode */
+ CANx->MCR &= (~(uint32_t)CAN_MCR_SLEEP);
+
+ /* Request initialisation */
+ CANx->MCR |= CAN_MCR_INRQ ;
+
+ /* Wait the acknowledge */
+ while (((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT))
+ {
+ wait_ack++;
+ }
+
+ /* Check acknowledge */
+ if ((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK)
+ {
+ InitStatus = CAN_InitStatus_Failed;
+ }
+ else
+ {
+ /* Set the time triggered communication mode */
+ if (CAN_InitStruct->CAN_TTCM == ENABLE)
+ {
+ CANx->MCR |= CAN_MCR_TTCM;
+ }
+ else
+ {
+ CANx->MCR &= ~(uint32_t)CAN_MCR_TTCM;
+ }
+
+ /* Set the automatic bus-off management */
+ if (CAN_InitStruct->CAN_ABOM == ENABLE)
+ {
+ CANx->MCR |= CAN_MCR_ABOM;
+ }
+ else
+ {
+ CANx->MCR &= ~(uint32_t)CAN_MCR_ABOM;
+ }
+
+ /* Set the automatic wake-up mode */
+ if (CAN_InitStruct->CAN_AWUM == ENABLE)
+ {
+ CANx->MCR |= CAN_MCR_AWUM;
+ }
+ else
+ {
+ CANx->MCR &= ~(uint32_t)CAN_MCR_AWUM;
+ }
+
+ /* Set the no automatic retransmission */
+ if (CAN_InitStruct->CAN_NART == ENABLE)
+ {
+ CANx->MCR |= CAN_MCR_NART;
+ }
+ else
+ {
+ CANx->MCR &= ~(uint32_t)CAN_MCR_NART;
+ }
+
+ /* Set the receive FIFO locked mode */
+ if (CAN_InitStruct->CAN_RFLM == ENABLE)
+ {
+ CANx->MCR |= CAN_MCR_RFLM;
+ }
+ else
+ {
+ CANx->MCR &= ~(uint32_t)CAN_MCR_RFLM;
+ }
+
+ /* Set the transmit FIFO priority */
+ if (CAN_InitStruct->CAN_TXFP == ENABLE)
+ {
+ CANx->MCR |= CAN_MCR_TXFP;
+ }
+ else
+ {
+ CANx->MCR &= ~(uint32_t)CAN_MCR_TXFP;
+ }
+
+ /* Set the bit timing register */
+ CANx->BTR = (uint32_t)((uint32_t)CAN_InitStruct->CAN_Mode << 30) | \
+ ((uint32_t)CAN_InitStruct->CAN_SJW << 24) | \
+ ((uint32_t)CAN_InitStruct->CAN_BS1 << 16) | \
+ ((uint32_t)CAN_InitStruct->CAN_BS2 << 20) | \
+ ((uint32_t)CAN_InitStruct->CAN_Prescaler - 1);
+
+ /* Request leave initialisation */
+ CANx->MCR &= ~(uint32_t)CAN_MCR_INRQ;
+
+ /* Wait the acknowledge */
+ wait_ack = 0;
+
+ while (((CANx->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT))
+ {
+ wait_ack++;
+ }
+
+ /* ...and check acknowledged */
+ if ((CANx->MSR & CAN_MSR_INAK) == CAN_MSR_INAK)
+ {
+ InitStatus = CAN_InitStatus_Failed;
+ }
+ else
+ {
+ InitStatus = CAN_InitStatus_Success ;
+ }
+ }
+
+ /* At this step, return the status of initialization */
+ return InitStatus;
+}
+
+/**
+ * @brief Initializes the CAN peripheral according to the specified
+ * parameters in the CAN_FilterInitStruct.
+ * @param CAN_FilterInitStruct: pointer to a CAN_FilterInitTypeDef
+ * structure that contains the configuration
+ * information.
+ * @retval None.
+ */
+void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct)
+{
+ uint32_t filter_number_bit_pos = 0;
+ /* Check the parameters */
+ assert_param(IS_CAN_FILTER_NUMBER(CAN_FilterInitStruct->CAN_FilterNumber));
+ assert_param(IS_CAN_FILTER_MODE(CAN_FilterInitStruct->CAN_FilterMode));
+ assert_param(IS_CAN_FILTER_SCALE(CAN_FilterInitStruct->CAN_FilterScale));
+ assert_param(IS_CAN_FILTER_FIFO(CAN_FilterInitStruct->CAN_FilterFIFOAssignment));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_FilterInitStruct->CAN_FilterActivation));
+
+ filter_number_bit_pos = ((uint32_t)1) << CAN_FilterInitStruct->CAN_FilterNumber;
+
+ /* Initialisation mode for the filter */
+ CAN1->FMR |= FMR_FINIT;
+
+ /* Filter Deactivation */
+ CAN1->FA1R &= ~(uint32_t)filter_number_bit_pos;
+
+ /* Filter Scale */
+ if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_16bit)
+ {
+ /* 16-bit scale for the filter */
+ CAN1->FS1R &= ~(uint32_t)filter_number_bit_pos;
+
+ /* First 16-bit identifier and First 16-bit mask */
+ /* Or First 16-bit identifier and Second 16-bit identifier */
+ CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 =
+ ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow) << 16) |
+ (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow);
+
+ /* Second 16-bit identifier and Second 16-bit mask */
+ /* Or Third 16-bit identifier and Fourth 16-bit identifier */
+ CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 =
+ ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) |
+ (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh);
+ }
+
+ if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_32bit)
+ {
+ /* 32-bit scale for the filter */
+ CAN1->FS1R |= filter_number_bit_pos;
+ /* 32-bit identifier or First 32-bit identifier */
+ CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 =
+ ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh) << 16) |
+ (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow);
+ /* 32-bit mask or Second 32-bit identifier */
+ CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 =
+ ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) |
+ (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow);
+ }
+
+ /* Filter Mode */
+ if (CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdMask)
+ {
+ /*Id/Mask mode for the filter*/
+ CAN1->FM1R &= ~(uint32_t)filter_number_bit_pos;
+ }
+ else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */
+ {
+ /*Identifier list mode for the filter*/
+ CAN1->FM1R |= (uint32_t)filter_number_bit_pos;
+ }
+
+ /* Filter FIFO assignment */
+ if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO0)
+ {
+ /* FIFO 0 assignation for the filter */
+ CAN1->FFA1R &= ~(uint32_t)filter_number_bit_pos;
+ }
+
+ if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO1)
+ {
+ /* FIFO 1 assignation for the filter */
+ CAN1->FFA1R |= (uint32_t)filter_number_bit_pos;
+ }
+
+ /* Filter activation */
+ if (CAN_FilterInitStruct->CAN_FilterActivation == ENABLE)
+ {
+ CAN1->FA1R |= filter_number_bit_pos;
+ }
+
+ /* Leave the initialisation mode for the filter */
+ CAN1->FMR &= ~FMR_FINIT;
+}
+
+/**
+ * @brief Fills each CAN_InitStruct member with its default value.
+ * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure which
+ * will be initialized.
+ * @retval None.
+ */
+void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct)
+{
+ /* Reset CAN init structure parameters values */
+
+ /* Initialize the time triggered communication mode */
+ CAN_InitStruct->CAN_TTCM = DISABLE;
+
+ /* Initialize the automatic bus-off management */
+ CAN_InitStruct->CAN_ABOM = DISABLE;
+
+ /* Initialize the automatic wake-up mode */
+ CAN_InitStruct->CAN_AWUM = DISABLE;
+
+ /* Initialize the no automatic retransmission */
+ CAN_InitStruct->CAN_NART = DISABLE;
+
+ /* Initialize the receive FIFO locked mode */
+ CAN_InitStruct->CAN_RFLM = DISABLE;
+
+ /* Initialize the transmit FIFO priority */
+ CAN_InitStruct->CAN_TXFP = DISABLE;
+
+ /* Initialize the CAN_Mode member */
+ CAN_InitStruct->CAN_Mode = CAN_Mode_Normal;
+
+ /* Initialize the CAN_SJW member */
+ CAN_InitStruct->CAN_SJW = CAN_SJW_1tq;
+
+ /* Initialize the CAN_BS1 member */
+ CAN_InitStruct->CAN_BS1 = CAN_BS1_4tq;
+
+ /* Initialize the CAN_BS2 member */
+ CAN_InitStruct->CAN_BS2 = CAN_BS2_3tq;
+
+ /* Initialize the CAN_Prescaler member */
+ CAN_InitStruct->CAN_Prescaler = 1;
+}
+
+/**
+ * @brief Select the start bank filter for slave CAN.
+ * @note This function applies only to STM32 Connectivity line devices.
+ * @param CAN_BankNumber: Select the start slave bank filter from 1..27.
+ * @retval None.
+ */
+void CAN_SlaveStartBank(uint8_t CAN_BankNumber)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_BANKNUMBER(CAN_BankNumber));
+
+ /* Enter Initialisation mode for the filter */
+ CAN1->FMR |= FMR_FINIT;
+
+ /* Select the start slave bank */
+ CAN1->FMR &= (uint32_t)0xFFFFC0F1 ;
+ CAN1->FMR |= (uint32_t)(CAN_BankNumber)<<8;
+
+ /* Leave Initialisation mode for the filter */
+ CAN1->FMR &= ~FMR_FINIT;
+}
+
+/**
+ * @brief Enables or disables the DBG Freeze for CAN.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param NewState: new state of the CAN peripheral. This parameter can
+ * be: ENABLE or DISABLE.
+ * @retval None.
+ */
+void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable Debug Freeze */
+ CANx->MCR |= MCR_DBF;
+ }
+ else
+ {
+ /* Disable Debug Freeze */
+ CANx->MCR &= ~MCR_DBF;
+ }
+}
+
+
+/**
+ * @brief Enables or disabes the CAN Time TriggerOperation communication mode.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param NewState : Mode new state , can be one of @ref FunctionalState.
+ * @note when enabled, Time stamp (TIME[15:0]) value is sent in the last
+ * two data bytes of the 8-byte message: TIME[7:0] in data byte 6
+ * and TIME[15:8] in data byte 7
+ * @note DLC must be programmed as 8 in order Time Stamp (2 bytes) to be
+ * sent over the CAN bus.
+ * @retval None
+ */
+void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the TTCM mode */
+ CANx->MCR |= CAN_MCR_TTCM;
+
+ /* Set TGT bits */
+ CANx->sTxMailBox[0].TDTR |= ((uint32_t)CAN_TDT0R_TGT);
+ CANx->sTxMailBox[1].TDTR |= ((uint32_t)CAN_TDT1R_TGT);
+ CANx->sTxMailBox[2].TDTR |= ((uint32_t)CAN_TDT2R_TGT);
+ }
+ else
+ {
+ /* Disable the TTCM mode */
+ CANx->MCR &= (uint32_t)(~(uint32_t)CAN_MCR_TTCM);
+
+ /* Reset TGT bits */
+ CANx->sTxMailBox[0].TDTR &= ((uint32_t)~CAN_TDT0R_TGT);
+ CANx->sTxMailBox[1].TDTR &= ((uint32_t)~CAN_TDT1R_TGT);
+ CANx->sTxMailBox[2].TDTR &= ((uint32_t)~CAN_TDT2R_TGT);
+ }
+}
+/**
+ * @brief Initiates the transmission of a message.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param TxMessage: pointer to a structure which contains CAN Id, CAN
+ * DLC and CAN data.
+ * @retval The number of the mailbox that is used for transmission
+ * or CAN_TxStatus_NoMailBox if there is no empty mailbox.
+ */
+uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage)
+{
+ uint8_t transmit_mailbox = 0;
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_IDTYPE(TxMessage->IDE));
+ assert_param(IS_CAN_RTR(TxMessage->RTR));
+ assert_param(IS_CAN_DLC(TxMessage->DLC));
+
+ /* Select one empty transmit mailbox */
+ if ((CANx->TSR&CAN_TSR_TME0) == CAN_TSR_TME0)
+ {
+ transmit_mailbox = 0;
+ }
+ else if ((CANx->TSR&CAN_TSR_TME1) == CAN_TSR_TME1)
+ {
+ transmit_mailbox = 1;
+ }
+ else if ((CANx->TSR&CAN_TSR_TME2) == CAN_TSR_TME2)
+ {
+ transmit_mailbox = 2;
+ }
+ else
+ {
+ transmit_mailbox = CAN_TxStatus_NoMailBox;
+ }
+
+ if (transmit_mailbox != CAN_TxStatus_NoMailBox)
+ {
+ /* Set up the Id */
+ CANx->sTxMailBox[transmit_mailbox].TIR &= TMIDxR_TXRQ;
+ if (TxMessage->IDE == CAN_Id_Standard)
+ {
+ assert_param(IS_CAN_STDID(TxMessage->StdId));
+ CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->StdId << 21) | \
+ TxMessage->RTR);
+ }
+ else
+ {
+ assert_param(IS_CAN_EXTID(TxMessage->ExtId));
+ CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->ExtId << 3) | \
+ TxMessage->IDE | \
+ TxMessage->RTR);
+ }
+
+ /* Set up the DLC */
+ TxMessage->DLC &= (uint8_t)0x0000000F;
+ CANx->sTxMailBox[transmit_mailbox].TDTR &= (uint32_t)0xFFFFFFF0;
+ CANx->sTxMailBox[transmit_mailbox].TDTR |= TxMessage->DLC;
+
+ /* Set up the data field */
+ CANx->sTxMailBox[transmit_mailbox].TDLR = (((uint32_t)TxMessage->Data[3] << 24) |
+ ((uint32_t)TxMessage->Data[2] << 16) |
+ ((uint32_t)TxMessage->Data[1] << 8) |
+ ((uint32_t)TxMessage->Data[0]));
+ CANx->sTxMailBox[transmit_mailbox].TDHR = (((uint32_t)TxMessage->Data[7] << 24) |
+ ((uint32_t)TxMessage->Data[6] << 16) |
+ ((uint32_t)TxMessage->Data[5] << 8) |
+ ((uint32_t)TxMessage->Data[4]));
+ /* Request transmission */
+ CANx->sTxMailBox[transmit_mailbox].TIR |= TMIDxR_TXRQ;
+ }
+ return transmit_mailbox;
+}
+
+/**
+ * @brief Checks the transmission of a message.
+ * @param CANx: where x can be 1 or 2 to to select the
+ * CAN peripheral.
+ * @param TransmitMailbox: the number of the mailbox that is used for
+ * transmission.
+ * @retval CAN_TxStatus_Ok if the CAN driver transmits the message, CAN_TxStatus_Failed
+ * in an other case.
+ */
+uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox)
+{
+ uint32_t state = 0;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_TRANSMITMAILBOX(TransmitMailbox));
+
+ switch (TransmitMailbox)
+ {
+ case (CAN_TXMAILBOX_0):
+ state = CANx->TSR & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0);
+ break;
+ case (CAN_TXMAILBOX_1):
+ state = CANx->TSR & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1);
+ break;
+ case (CAN_TXMAILBOX_2):
+ state = CANx->TSR & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2);
+ break;
+ default:
+ state = CAN_TxStatus_Failed;
+ break;
+ }
+ switch (state)
+ {
+ /* transmit pending */
+ case (0x0): state = CAN_TxStatus_Pending;
+ break;
+ /* transmit failed */
+ case (CAN_TSR_RQCP0 | CAN_TSR_TME0): state = CAN_TxStatus_Failed;
+ break;
+ case (CAN_TSR_RQCP1 | CAN_TSR_TME1): state = CAN_TxStatus_Failed;
+ break;
+ case (CAN_TSR_RQCP2 | CAN_TSR_TME2): state = CAN_TxStatus_Failed;
+ break;
+ /* transmit succeeded */
+ case (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0):state = CAN_TxStatus_Ok;
+ break;
+ case (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1):state = CAN_TxStatus_Ok;
+ break;
+ case (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2):state = CAN_TxStatus_Ok;
+ break;
+ default: state = CAN_TxStatus_Failed;
+ break;
+ }
+ return (uint8_t) state;
+}
+
+/**
+ * @brief Cancels a transmit request.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param Mailbox: Mailbox number.
+ * @retval None.
+ */
+void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_TRANSMITMAILBOX(Mailbox));
+ /* abort transmission */
+ switch (Mailbox)
+ {
+ case (CAN_TXMAILBOX_0): CANx->TSR |= CAN_TSR_ABRQ0;
+ break;
+ case (CAN_TXMAILBOX_1): CANx->TSR |= CAN_TSR_ABRQ1;
+ break;
+ case (CAN_TXMAILBOX_2): CANx->TSR |= CAN_TSR_ABRQ2;
+ break;
+ default:
+ break;
+ }
+}
+
+
+/**
+ * @brief Receives a message.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @param RxMessage: pointer to a structure receive message which contains
+ * CAN Id, CAN DLC, CAN datas and FMI number.
+ * @retval None.
+ */
+void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_FIFO(FIFONumber));
+ /* Get the Id */
+ RxMessage->IDE = (uint8_t)0x04 & CANx->sFIFOMailBox[FIFONumber].RIR;
+ if (RxMessage->IDE == CAN_Id_Standard)
+ {
+ RxMessage->StdId = (uint32_t)0x000007FF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 21);
+ }
+ else
+ {
+ RxMessage->ExtId = (uint32_t)0x1FFFFFFF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 3);
+ }
+
+ RxMessage->RTR = (uint8_t)0x02 & CANx->sFIFOMailBox[FIFONumber].RIR;
+ /* Get the DLC */
+ RxMessage->DLC = (uint8_t)0x0F & CANx->sFIFOMailBox[FIFONumber].RDTR;
+ /* Get the FMI */
+ RxMessage->FMI = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDTR >> 8);
+ /* Get the data field */
+ RxMessage->Data[0] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDLR;
+ RxMessage->Data[1] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 8);
+ RxMessage->Data[2] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 16);
+ RxMessage->Data[3] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 24);
+ RxMessage->Data[4] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDHR;
+ RxMessage->Data[5] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 8);
+ RxMessage->Data[6] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 16);
+ RxMessage->Data[7] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 24);
+ /* Release the FIFO */
+ /* Release FIFO0 */
+ if (FIFONumber == CAN_FIFO0)
+ {
+ CANx->RF0R |= CAN_RF0R_RFOM0;
+ }
+ /* Release FIFO1 */
+ else /* FIFONumber == CAN_FIFO1 */
+ {
+ CANx->RF1R |= CAN_RF1R_RFOM1;
+ }
+}
+
+/**
+ * @brief Releases the specified FIFO.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param FIFONumber: FIFO to release, CAN_FIFO0 or CAN_FIFO1.
+ * @retval None.
+ */
+void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_FIFO(FIFONumber));
+ /* Release FIFO0 */
+ if (FIFONumber == CAN_FIFO0)
+ {
+ CANx->RF0R |= CAN_RF0R_RFOM0;
+ }
+ /* Release FIFO1 */
+ else /* FIFONumber == CAN_FIFO1 */
+ {
+ CANx->RF1R |= CAN_RF1R_RFOM1;
+ }
+}
+
+/**
+ * @brief Returns the number of pending messages.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval NbMessage : which is the number of pending message.
+ */
+uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber)
+{
+ uint8_t message_pending=0;
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_FIFO(FIFONumber));
+ if (FIFONumber == CAN_FIFO0)
+ {
+ message_pending = (uint8_t)(CANx->RF0R&(uint32_t)0x03);
+ }
+ else if (FIFONumber == CAN_FIFO1)
+ {
+ message_pending = (uint8_t)(CANx->RF1R&(uint32_t)0x03);
+ }
+ else
+ {
+ message_pending = 0;
+ }
+ return message_pending;
+}
+
+
+/**
+ * @brief Select the CAN Operation mode.
+ * @param CAN_OperatingMode : CAN Operating Mode. This parameter can be one
+ * of @ref CAN_OperatingMode_TypeDef enumeration.
+ * @retval status of the requested mode which can be
+ * - CAN_ModeStatus_Failed CAN failed entering the specific mode
+ * - CAN_ModeStatus_Success CAN Succeed entering the specific mode
+
+ */
+uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode)
+{
+ uint8_t status = CAN_ModeStatus_Failed;
+
+ /* Timeout for INAK or also for SLAK bits*/
+ uint32_t timeout = INAK_TIMEOUT;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_OPERATING_MODE(CAN_OperatingMode));
+
+ if (CAN_OperatingMode == CAN_OperatingMode_Initialization)
+ {
+ /* Request initialisation */
+ CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_SLEEP)) | CAN_MCR_INRQ);
+
+ /* Wait the acknowledge */
+ while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK) && (timeout != 0))
+ {
+ timeout--;
+ }
+ if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK)
+ {
+ status = CAN_ModeStatus_Failed;
+ }
+ else
+ {
+ status = CAN_ModeStatus_Success;
+ }
+ }
+ else if (CAN_OperatingMode == CAN_OperatingMode_Normal)
+ {
+ /* Request leave initialisation and sleep mode and enter Normal mode */
+ CANx->MCR &= (uint32_t)(~(CAN_MCR_SLEEP|CAN_MCR_INRQ));
+
+ /* Wait the acknowledge */
+ while (((CANx->MSR & CAN_MODE_MASK) != 0) && (timeout!=0))
+ {
+ timeout--;
+ }
+ if ((CANx->MSR & CAN_MODE_MASK) != 0)
+ {
+ status = CAN_ModeStatus_Failed;
+ }
+ else
+ {
+ status = CAN_ModeStatus_Success;
+ }
+ }
+ else if (CAN_OperatingMode == CAN_OperatingMode_Sleep)
+ {
+ /* Request Sleep mode */
+ CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP);
+
+ /* Wait the acknowledge */
+ while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK) && (timeout!=0))
+ {
+ timeout--;
+ }
+ if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK)
+ {
+ status = CAN_ModeStatus_Failed;
+ }
+ else
+ {
+ status = CAN_ModeStatus_Success;
+ }
+ }
+ else
+ {
+ status = CAN_ModeStatus_Failed;
+ }
+
+ return (uint8_t) status;
+}
+
+/**
+ * @brief Enters the low power mode.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @retval status: CAN_Sleep_Ok if sleep entered, CAN_Sleep_Failed in an
+ * other case.
+ */
+uint8_t CAN_Sleep(CAN_TypeDef* CANx)
+{
+ uint8_t sleepstatus = CAN_Sleep_Failed;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+
+ /* Request Sleep mode */
+ CANx->MCR = (((CANx->MCR) & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP);
+
+ /* Sleep mode status */
+ if ((CANx->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) == CAN_MSR_SLAK)
+ {
+ /* Sleep mode not entered */
+ sleepstatus = CAN_Sleep_Ok;
+ }
+ /* return sleep mode status */
+ return (uint8_t)sleepstatus;
+}
+
+/**
+ * @brief Wakes the CAN up.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @retval status: CAN_WakeUp_Ok if sleep mode left, CAN_WakeUp_Failed in an
+ * other case.
+ */
+uint8_t CAN_WakeUp(CAN_TypeDef* CANx)
+{
+ uint32_t wait_slak = SLAK_TIMEOUT;
+ uint8_t wakeupstatus = CAN_WakeUp_Failed;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+
+ /* Wake up request */
+ CANx->MCR &= ~(uint32_t)CAN_MCR_SLEEP;
+
+ /* Sleep mode status */
+ while(((CANx->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)&&(wait_slak!=0x00))
+ {
+ wait_slak--;
+ }
+ if((CANx->MSR & CAN_MSR_SLAK) != CAN_MSR_SLAK)
+ {
+ /* wake up done : Sleep mode exited */
+ wakeupstatus = CAN_WakeUp_Ok;
+ }
+ /* return wakeup status */
+ return (uint8_t)wakeupstatus;
+}
+
+
+/**
+ * @brief Returns the CANx's last error code (LEC).
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @retval CAN_ErrorCode: specifies the Error code :
+ * - CAN_ERRORCODE_NoErr No Error
+ * - CAN_ERRORCODE_StuffErr Stuff Error
+ * - CAN_ERRORCODE_FormErr Form Error
+ * - CAN_ERRORCODE_ACKErr Acknowledgment Error
+ * - CAN_ERRORCODE_BitRecessiveErr Bit Recessive Error
+ * - CAN_ERRORCODE_BitDominantErr Bit Dominant Error
+ * - CAN_ERRORCODE_CRCErr CRC Error
+ * - CAN_ERRORCODE_SoftwareSetErr Software Set Error
+ */
+
+uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx)
+{
+ uint8_t errorcode=0;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+
+ /* Get the error code*/
+ errorcode = (((uint8_t)CANx->ESR) & (uint8_t)CAN_ESR_LEC);
+
+ /* Return the error code*/
+ return errorcode;
+}
+/**
+ * @brief Returns the CANx Receive Error Counter (REC).
+ * @note In case of an error during reception, this counter is incremented
+ * by 1 or by 8 depending on the error condition as defined by the CAN
+ * standard. After every successful reception, the counter is
+ * decremented by 1 or reset to 120 if its value was higher than 128.
+ * When the counter value exceeds 127, the CAN controller enters the
+ * error passive state.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @retval CAN Receive Error Counter.
+ */
+uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx)
+{
+ uint8_t counter=0;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+
+ /* Get the Receive Error Counter*/
+ counter = (uint8_t)((CANx->ESR & CAN_ESR_REC)>> 24);
+
+ /* Return the Receive Error Counter*/
+ return counter;
+}
+
+
+/**
+ * @brief Returns the LSB of the 9-bit CANx Transmit Error Counter(TEC).
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @retval LSB of the 9-bit CAN Transmit Error Counter.
+ */
+uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx)
+{
+ uint8_t counter=0;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+
+ /* Get the LSB of the 9-bit CANx Transmit Error Counter(TEC) */
+ counter = (uint8_t)((CANx->ESR & CAN_ESR_TEC)>> 16);
+
+ /* Return the LSB of the 9-bit CANx Transmit Error Counter(TEC) */
+ return counter;
+}
+
+
+/**
+ * @brief Enables or disables the specified CANx interrupts.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param CAN_IT: specifies the CAN interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * - CAN_IT_TME,
+ * - CAN_IT_FMP0,
+ * - CAN_IT_FF0,
+ * - CAN_IT_FOV0,
+ * - CAN_IT_FMP1,
+ * - CAN_IT_FF1,
+ * - CAN_IT_FOV1,
+ * - CAN_IT_EWG,
+ * - CAN_IT_EPV,
+ * - CAN_IT_LEC,
+ * - CAN_IT_ERR,
+ * - CAN_IT_WKU or
+ * - CAN_IT_SLK.
+ * @param NewState: new state of the CAN interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None.
+ */
+void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_IT(CAN_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected CANx interrupt */
+ CANx->IER |= CAN_IT;
+ }
+ else
+ {
+ /* Disable the selected CANx interrupt */
+ CANx->IER &= ~CAN_IT;
+ }
+}
+/**
+ * @brief Checks whether the specified CAN flag is set or not.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param CAN_FLAG: specifies the flag to check.
+ * This parameter can be one of the following flags:
+ * - CAN_FLAG_EWG
+ * - CAN_FLAG_EPV
+ * - CAN_FLAG_BOF
+ * - CAN_FLAG_RQCP0
+ * - CAN_FLAG_RQCP1
+ * - CAN_FLAG_RQCP2
+ * - CAN_FLAG_FMP1
+ * - CAN_FLAG_FF1
+ * - CAN_FLAG_FOV1
+ * - CAN_FLAG_FMP0
+ * - CAN_FLAG_FF0
+ * - CAN_FLAG_FOV0
+ * - CAN_FLAG_WKU
+ * - CAN_FLAG_SLAK
+ * - CAN_FLAG_LEC
+ * @retval The new state of CAN_FLAG (SET or RESET).
+ */
+FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_GET_FLAG(CAN_FLAG));
+
+
+ if((CAN_FLAG & CAN_FLAGS_ESR) != (uint32_t)RESET)
+ {
+ /* Check the status of the specified CAN flag */
+ if ((CANx->ESR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+ {
+ /* CAN_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CAN_FLAG is reset */
+ bitstatus = RESET;
+ }
+ }
+ else if((CAN_FLAG & CAN_FLAGS_MSR) != (uint32_t)RESET)
+ {
+ /* Check the status of the specified CAN flag */
+ if ((CANx->MSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+ {
+ /* CAN_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CAN_FLAG is reset */
+ bitstatus = RESET;
+ }
+ }
+ else if((CAN_FLAG & CAN_FLAGS_TSR) != (uint32_t)RESET)
+ {
+ /* Check the status of the specified CAN flag */
+ if ((CANx->TSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+ {
+ /* CAN_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CAN_FLAG is reset */
+ bitstatus = RESET;
+ }
+ }
+ else if((CAN_FLAG & CAN_FLAGS_RF0R) != (uint32_t)RESET)
+ {
+ /* Check the status of the specified CAN flag */
+ if ((CANx->RF0R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+ {
+ /* CAN_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CAN_FLAG is reset */
+ bitstatus = RESET;
+ }
+ }
+ else /* If(CAN_FLAG & CAN_FLAGS_RF1R != (uint32_t)RESET) */
+ {
+ /* Check the status of the specified CAN flag */
+ if ((uint32_t)(CANx->RF1R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+ {
+ /* CAN_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CAN_FLAG is reset */
+ bitstatus = RESET;
+ }
+ }
+ /* Return the CAN_FLAG status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the CAN's pending flags.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param CAN_FLAG: specifies the flag to clear.
+ * This parameter can be one of the following flags:
+ * - CAN_FLAG_RQCP0
+ * - CAN_FLAG_RQCP1
+ * - CAN_FLAG_RQCP2
+ * - CAN_FLAG_FF1
+ * - CAN_FLAG_FOV1
+ * - CAN_FLAG_FF0
+ * - CAN_FLAG_FOV0
+ * - CAN_FLAG_WKU
+ * - CAN_FLAG_SLAK
+ * - CAN_FLAG_LEC
+ * @retval None.
+ */
+void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG)
+{
+ uint32_t flagtmp=0;
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_CLEAR_FLAG(CAN_FLAG));
+
+ if (CAN_FLAG == CAN_FLAG_LEC) /* ESR register */
+ {
+ /* Clear the selected CAN flags */
+ CANx->ESR = (uint32_t)RESET;
+ }
+ else /* MSR or TSR or RF0R or RF1R */
+ {
+ flagtmp = CAN_FLAG & 0x000FFFFF;
+
+ if ((CAN_FLAG & CAN_FLAGS_RF0R)!=(uint32_t)RESET)
+ {
+ /* Receive Flags */
+ CANx->RF0R = (uint32_t)(flagtmp);
+ }
+ else if ((CAN_FLAG & CAN_FLAGS_RF1R)!=(uint32_t)RESET)
+ {
+ /* Receive Flags */
+ CANx->RF1R = (uint32_t)(flagtmp);
+ }
+ else if ((CAN_FLAG & CAN_FLAGS_TSR)!=(uint32_t)RESET)
+ {
+ /* Transmit Flags */
+ CANx->TSR = (uint32_t)(flagtmp);
+ }
+ else /* If((CAN_FLAG & CAN_FLAGS_MSR)!=(uint32_t)RESET) */
+ {
+ /* Operating mode Flags */
+ CANx->MSR = (uint32_t)(flagtmp);
+ }
+ }
+}
+
+/**
+ * @brief Checks whether the specified CANx interrupt has occurred or not.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param CAN_IT: specifies the CAN interrupt source to check.
+ * This parameter can be one of the following flags:
+ * - CAN_IT_TME
+ * - CAN_IT_FMP0
+ * - CAN_IT_FF0
+ * - CAN_IT_FOV0
+ * - CAN_IT_FMP1
+ * - CAN_IT_FF1
+ * - CAN_IT_FOV1
+ * - CAN_IT_WKU
+ * - CAN_IT_SLK
+ * - CAN_IT_EWG
+ * - CAN_IT_EPV
+ * - CAN_IT_BOF
+ * - CAN_IT_LEC
+ * - CAN_IT_ERR
+ * @retval The current state of CAN_IT (SET or RESET).
+ */
+ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT)
+{
+ ITStatus itstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_IT(CAN_IT));
+
+ /* check the enable interrupt bit */
+ if((CANx->IER & CAN_IT) != RESET)
+ {
+ /* in case the Interrupt is enabled, .... */
+ switch (CAN_IT)
+ {
+ case CAN_IT_TME:
+ /* Check CAN_TSR_RQCPx bits */
+ itstatus = CheckITStatus(CANx->TSR, CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2);
+ break;
+ case CAN_IT_FMP0:
+ /* Check CAN_RF0R_FMP0 bit */
+ itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FMP0);
+ break;
+ case CAN_IT_FF0:
+ /* Check CAN_RF0R_FULL0 bit */
+ itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FULL0);
+ break;
+ case CAN_IT_FOV0:
+ /* Check CAN_RF0R_FOVR0 bit */
+ itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FOVR0);
+ break;
+ case CAN_IT_FMP1:
+ /* Check CAN_RF1R_FMP1 bit */
+ itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FMP1);
+ break;
+ case CAN_IT_FF1:
+ /* Check CAN_RF1R_FULL1 bit */
+ itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FULL1);
+ break;
+ case CAN_IT_FOV1:
+ /* Check CAN_RF1R_FOVR1 bit */
+ itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FOVR1);
+ break;
+ case CAN_IT_WKU:
+ /* Check CAN_MSR_WKUI bit */
+ itstatus = CheckITStatus(CANx->MSR, CAN_MSR_WKUI);
+ break;
+ case CAN_IT_SLK:
+ /* Check CAN_MSR_SLAKI bit */
+ itstatus = CheckITStatus(CANx->MSR, CAN_MSR_SLAKI);
+ break;
+ case CAN_IT_EWG:
+ /* Check CAN_ESR_EWGF bit */
+ itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EWGF);
+ break;
+ case CAN_IT_EPV:
+ /* Check CAN_ESR_EPVF bit */
+ itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EPVF);
+ break;
+ case CAN_IT_BOF:
+ /* Check CAN_ESR_BOFF bit */
+ itstatus = CheckITStatus(CANx->ESR, CAN_ESR_BOFF);
+ break;
+ case CAN_IT_LEC:
+ /* Check CAN_ESR_LEC bit */
+ itstatus = CheckITStatus(CANx->ESR, CAN_ESR_LEC);
+ break;
+ case CAN_IT_ERR:
+ /* Check CAN_MSR_ERRI bit */
+ itstatus = CheckITStatus(CANx->MSR, CAN_MSR_ERRI);
+ break;
+ default :
+ /* in case of error, return RESET */
+ itstatus = RESET;
+ break;
+ }
+ }
+ else
+ {
+ /* in case the Interrupt is not enabled, return RESET */
+ itstatus = RESET;
+ }
+
+ /* Return the CAN_IT status */
+ return itstatus;
+}
+
+/**
+ * @brief Clears the CANx's interrupt pending bits.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param CAN_IT: specifies the interrupt pending bit to clear.
+ * - CAN_IT_TME
+ * - CAN_IT_FF0
+ * - CAN_IT_FOV0
+ * - CAN_IT_FF1
+ * - CAN_IT_FOV1
+ * - CAN_IT_WKU
+ * - CAN_IT_SLK
+ * - CAN_IT_EWG
+ * - CAN_IT_EPV
+ * - CAN_IT_BOF
+ * - CAN_IT_LEC
+ * - CAN_IT_ERR
+ * @retval None.
+ */
+void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_CLEAR_IT(CAN_IT));
+
+ switch (CAN_IT)
+ {
+ case CAN_IT_TME:
+ /* Clear CAN_TSR_RQCPx (rc_w1)*/
+ CANx->TSR = CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2;
+ break;
+ case CAN_IT_FF0:
+ /* Clear CAN_RF0R_FULL0 (rc_w1)*/
+ CANx->RF0R = CAN_RF0R_FULL0;
+ break;
+ case CAN_IT_FOV0:
+ /* Clear CAN_RF0R_FOVR0 (rc_w1)*/
+ CANx->RF0R = CAN_RF0R_FOVR0;
+ break;
+ case CAN_IT_FF1:
+ /* Clear CAN_RF1R_FULL1 (rc_w1)*/
+ CANx->RF1R = CAN_RF1R_FULL1;
+ break;
+ case CAN_IT_FOV1:
+ /* Clear CAN_RF1R_FOVR1 (rc_w1)*/
+ CANx->RF1R = CAN_RF1R_FOVR1;
+ break;
+ case CAN_IT_WKU:
+ /* Clear CAN_MSR_WKUI (rc_w1)*/
+ CANx->MSR = CAN_MSR_WKUI;
+ break;
+ case CAN_IT_SLK:
+ /* Clear CAN_MSR_SLAKI (rc_w1)*/
+ CANx->MSR = CAN_MSR_SLAKI;
+ break;
+ case CAN_IT_EWG:
+ /* Clear CAN_MSR_ERRI (rc_w1) */
+ CANx->MSR = CAN_MSR_ERRI;
+ /* Note : the corresponding Flag is cleared by hardware depending
+ of the CAN Bus status*/
+ break;
+ case CAN_IT_EPV:
+ /* Clear CAN_MSR_ERRI (rc_w1) */
+ CANx->MSR = CAN_MSR_ERRI;
+ /* Note : the corresponding Flag is cleared by hardware depending
+ of the CAN Bus status*/
+ break;
+ case CAN_IT_BOF:
+ /* Clear CAN_MSR_ERRI (rc_w1) */
+ CANx->MSR = CAN_MSR_ERRI;
+ /* Note : the corresponding Flag is cleared by hardware depending
+ of the CAN Bus status*/
+ break;
+ case CAN_IT_LEC:
+ /* Clear LEC bits */
+ CANx->ESR = RESET;
+ /* Clear CAN_MSR_ERRI (rc_w1) */
+ CANx->MSR = CAN_MSR_ERRI;
+ break;
+ case CAN_IT_ERR:
+ /*Clear LEC bits */
+ CANx->ESR = RESET;
+ /* Clear CAN_MSR_ERRI (rc_w1) */
+ CANx->MSR = CAN_MSR_ERRI;
+ /* Note : BOFF, EPVF and EWGF Flags are cleared by hardware depending
+ of the CAN Bus status*/
+ break;
+ default :
+ break;
+ }
+}
+
+/**
+ * @brief Checks whether the CAN interrupt has occurred or not.
+ * @param CAN_Reg: specifies the CAN interrupt register to check.
+ * @param It_Bit: specifies the interrupt source bit to check.
+ * @retval The new state of the CAN Interrupt (SET or RESET).
+ */
+static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit)
+{
+ ITStatus pendingbitstatus = RESET;
+
+ if ((CAN_Reg & It_Bit) != (uint32_t)RESET)
+ {
+ /* CAN_IT is set */
+ pendingbitstatus = SET;
+ }
+ else
+ {
+ /* CAN_IT is reset */
+ pendingbitstatus = RESET;
+ }
+ return pendingbitstatus;
+}
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_cec.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_cec.c
new file mode 100644
index 00000000..08b501a0
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_cec.c
@@ -0,0 +1,433 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_cec.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the CEC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_cec.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup CEC
+ * @brief CEC driver modules
+ * @{
+ */
+
+/** @defgroup CEC_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_Private_Defines
+ * @{
+ */
+
+/* ------------ CEC registers bit address in the alias region ----------- */
+#define CEC_OFFSET (CEC_BASE - PERIPH_BASE)
+
+/* --- CFGR Register ---*/
+
+/* Alias word address of PE bit */
+#define CFGR_OFFSET (CEC_OFFSET + 0x00)
+#define PE_BitNumber 0x00
+#define CFGR_PE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (PE_BitNumber * 4))
+
+/* Alias word address of IE bit */
+#define IE_BitNumber 0x01
+#define CFGR_IE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (IE_BitNumber * 4))
+
+/* --- CSR Register ---*/
+
+/* Alias word address of TSOM bit */
+#define CSR_OFFSET (CEC_OFFSET + 0x10)
+#define TSOM_BitNumber 0x00
+#define CSR_TSOM_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TSOM_BitNumber * 4))
+
+/* Alias word address of TEOM bit */
+#define TEOM_BitNumber 0x01
+#define CSR_TEOM_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEOM_BitNumber * 4))
+
+#define CFGR_CLEAR_Mask (uint8_t)(0xF3) /* CFGR register Mask */
+#define FLAG_Mask ((uint32_t)0x00FFFFFF) /* CEC FLAG mask */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the CEC peripheral registers to their default reset
+ * values.
+ * @param None
+ * @retval None
+ */
+void CEC_DeInit(void)
+{
+ /* Enable CEC reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_CEC, ENABLE);
+ /* Release CEC from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_CEC, DISABLE);
+}
+
+
+/**
+ * @brief Initializes the CEC peripheral according to the specified
+ * parameters in the CEC_InitStruct.
+ * @param CEC_InitStruct: pointer to an CEC_InitTypeDef structure that
+ * contains the configuration information for the specified
+ * CEC peripheral.
+ * @retval None
+ */
+void CEC_Init(CEC_InitTypeDef* CEC_InitStruct)
+{
+ uint16_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_CEC_BIT_TIMING_ERROR_MODE(CEC_InitStruct->CEC_BitTimingMode));
+ assert_param(IS_CEC_BIT_PERIOD_ERROR_MODE(CEC_InitStruct->CEC_BitPeriodMode));
+
+ /*---------------------------- CEC CFGR Configuration -----------------*/
+ /* Get the CEC CFGR value */
+ tmpreg = CEC->CFGR;
+
+ /* Clear BTEM and BPEM bits */
+ tmpreg &= CFGR_CLEAR_Mask;
+
+ /* Configure CEC: Bit Timing Error and Bit Period Error */
+ tmpreg |= (uint16_t)(CEC_InitStruct->CEC_BitTimingMode | CEC_InitStruct->CEC_BitPeriodMode);
+
+ /* Write to CEC CFGR register*/
+ CEC->CFGR = tmpreg;
+
+}
+
+/**
+ * @brief Enables or disables the specified CEC peripheral.
+ * @param NewState: new state of the CEC peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void CEC_Cmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CFGR_PE_BB = (uint32_t)NewState;
+
+ if(NewState == DISABLE)
+ {
+ /* Wait until the PE bit is cleared by hardware (Idle Line detected) */
+ while((CEC->CFGR & CEC_CFGR_PE) != (uint32_t)RESET)
+ {
+ }
+ }
+}
+
+/**
+ * @brief Enables or disables the CEC interrupt.
+ * @param NewState: new state of the CEC interrupt.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void CEC_ITConfig(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CFGR_IE_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Defines the Own Address of the CEC device.
+ * @param CEC_OwnAddress: The CEC own address
+ * @retval None
+ */
+void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress)
+{
+ /* Check the parameters */
+ assert_param(IS_CEC_ADDRESS(CEC_OwnAddress));
+
+ /* Set the CEC own address */
+ CEC->OAR = CEC_OwnAddress;
+}
+
+/**
+ * @brief Sets the CEC prescaler value.
+ * @param CEC_Prescaler: CEC prescaler new value
+ * @retval None
+ */
+void CEC_SetPrescaler(uint16_t CEC_Prescaler)
+{
+ /* Check the parameters */
+ assert_param(IS_CEC_PRESCALER(CEC_Prescaler));
+
+ /* Set the Prescaler value*/
+ CEC->PRES = CEC_Prescaler;
+}
+
+/**
+ * @brief Transmits single data through the CEC peripheral.
+ * @param Data: the data to transmit.
+ * @retval None
+ */
+void CEC_SendDataByte(uint8_t Data)
+{
+ /* Transmit Data */
+ CEC->TXD = Data ;
+}
+
+
+/**
+ * @brief Returns the most recent received data by the CEC peripheral.
+ * @param None
+ * @retval The received data.
+ */
+uint8_t CEC_ReceiveDataByte(void)
+{
+ /* Receive Data */
+ return (uint8_t)(CEC->RXD);
+}
+
+/**
+ * @brief Starts a new message.
+ * @param None
+ * @retval None
+ */
+void CEC_StartOfMessage(void)
+{
+ /* Starts of new message */
+ *(__IO uint32_t *) CSR_TSOM_BB = (uint32_t)0x1;
+}
+
+/**
+ * @brief Transmits message with or without an EOM bit.
+ * @param NewState: new state of the CEC Tx End Of Message.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void CEC_EndOfMessageCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ /* The data byte will be transmitted with or without an EOM bit*/
+ *(__IO uint32_t *) CSR_TEOM_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Gets the CEC flag status
+ * @param CEC_FLAG: specifies the CEC flag to check.
+ * This parameter can be one of the following values:
+ * @arg CEC_FLAG_BTE: Bit Timing Error
+ * @arg CEC_FLAG_BPE: Bit Period Error
+ * @arg CEC_FLAG_RBTFE: Rx Block Transfer Finished Error
+ * @arg CEC_FLAG_SBE: Start Bit Error
+ * @arg CEC_FLAG_ACKE: Block Acknowledge Error
+ * @arg CEC_FLAG_LINE: Line Error
+ * @arg CEC_FLAG_TBTFE: Tx Block Transfer Finished Error
+ * @arg CEC_FLAG_TEOM: Tx End Of Message
+ * @arg CEC_FLAG_TERR: Tx Error
+ * @arg CEC_FLAG_TBTRF: Tx Byte Transfer Request or Block Transfer Finished
+ * @arg CEC_FLAG_RSOM: Rx Start Of Message
+ * @arg CEC_FLAG_REOM: Rx End Of Message
+ * @arg CEC_FLAG_RERR: Rx Error
+ * @arg CEC_FLAG_RBTF: Rx Byte/Block Transfer Finished
+ * @retval The new state of CEC_FLAG (SET or RESET)
+ */
+FlagStatus CEC_GetFlagStatus(uint32_t CEC_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ uint32_t cecreg = 0, cecbase = 0;
+
+ /* Check the parameters */
+ assert_param(IS_CEC_GET_FLAG(CEC_FLAG));
+
+ /* Get the CEC peripheral base address */
+ cecbase = (uint32_t)(CEC_BASE);
+
+ /* Read flag register index */
+ cecreg = CEC_FLAG >> 28;
+
+ /* Get bit[23:0] of the flag */
+ CEC_FLAG &= FLAG_Mask;
+
+ if(cecreg != 0)
+ {
+ /* Flag in CEC ESR Register */
+ CEC_FLAG = (uint32_t)(CEC_FLAG >> 16);
+
+ /* Get the CEC ESR register address */
+ cecbase += 0xC;
+ }
+ else
+ {
+ /* Get the CEC CSR register address */
+ cecbase += 0x10;
+ }
+
+ if(((*(__IO uint32_t *)cecbase) & CEC_FLAG) != (uint32_t)RESET)
+ {
+ /* CEC_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CEC_FLAG is reset */
+ bitstatus = RESET;
+ }
+
+ /* Return the CEC_FLAG status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the CEC's pending flags.
+ * @param CEC_FLAG: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg CEC_FLAG_TERR: Tx Error
+ * @arg CEC_FLAG_TBTRF: Tx Byte Transfer Request or Block Transfer Finished
+ * @arg CEC_FLAG_RSOM: Rx Start Of Message
+ * @arg CEC_FLAG_REOM: Rx End Of Message
+ * @arg CEC_FLAG_RERR: Rx Error
+ * @arg CEC_FLAG_RBTF: Rx Byte/Block Transfer Finished
+ * @retval None
+ */
+void CEC_ClearFlag(uint32_t CEC_FLAG)
+{
+ uint32_t tmp = 0x0;
+
+ /* Check the parameters */
+ assert_param(IS_CEC_CLEAR_FLAG(CEC_FLAG));
+
+ tmp = CEC->CSR & 0x2;
+
+ /* Clear the selected CEC flags */
+ CEC->CSR &= (uint32_t)(((~(uint32_t)CEC_FLAG) & 0xFFFFFFFC) | tmp);
+}
+
+/**
+ * @brief Checks whether the specified CEC interrupt has occurred or not.
+ * @param CEC_IT: specifies the CEC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg CEC_IT_TERR: Tx Error
+ * @arg CEC_IT_TBTF: Tx Block Transfer Finished
+ * @arg CEC_IT_RERR: Rx Error
+ * @arg CEC_IT_RBTF: Rx Block Transfer Finished
+ * @retval The new state of CEC_IT (SET or RESET).
+ */
+ITStatus CEC_GetITStatus(uint8_t CEC_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t enablestatus = 0;
+
+ /* Check the parameters */
+ assert_param(IS_CEC_GET_IT(CEC_IT));
+
+ /* Get the CEC IT enable bit status */
+ enablestatus = (CEC->CFGR & (uint8_t)CEC_CFGR_IE) ;
+
+ /* Check the status of the specified CEC interrupt */
+ if (((CEC->CSR & CEC_IT) != (uint32_t)RESET) && enablestatus)
+ {
+ /* CEC_IT is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CEC_IT is reset */
+ bitstatus = RESET;
+ }
+ /* Return the CEC_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the CEC's interrupt pending bits.
+ * @param CEC_IT: specifies the CEC interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg CEC_IT_TERR: Tx Error
+ * @arg CEC_IT_TBTF: Tx Block Transfer Finished
+ * @arg CEC_IT_RERR: Rx Error
+ * @arg CEC_IT_RBTF: Rx Block Transfer Finished
+ * @retval None
+ */
+void CEC_ClearITPendingBit(uint16_t CEC_IT)
+{
+ uint32_t tmp = 0x0;
+
+ /* Check the parameters */
+ assert_param(IS_CEC_GET_IT(CEC_IT));
+
+ tmp = CEC->CSR & 0x2;
+
+ /* Clear the selected CEC interrupt pending bits */
+ CEC->CSR &= (uint32_t)(((~(uint32_t)CEC_IT) & 0xFFFFFFFC) | tmp);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_crc.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_crc.c
new file mode 100644
index 00000000..ef0c047d
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_crc.c
@@ -0,0 +1,160 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_crc.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the CRC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_crc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup CRC
+ * @brief CRC driver modules
+ * @{
+ */
+
+/** @defgroup CRC_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Resets the CRC Data register (DR).
+ * @param None
+ * @retval None
+ */
+void CRC_ResetDR(void)
+{
+ /* Reset CRC generator */
+ CRC->CR = CRC_CR_RESET;
+}
+
+/**
+ * @brief Computes the 32-bit CRC of a given data word(32-bit).
+ * @param Data: data word(32-bit) to compute its CRC
+ * @retval 32-bit CRC
+ */
+uint32_t CRC_CalcCRC(uint32_t Data)
+{
+ CRC->DR = Data;
+
+ return (CRC->DR);
+}
+
+/**
+ * @brief Computes the 32-bit CRC of a given buffer of data word(32-bit).
+ * @param pBuffer: pointer to the buffer containing the data to be computed
+ * @param BufferLength: length of the buffer to be computed
+ * @retval 32-bit CRC
+ */
+uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength)
+{
+ uint32_t index = 0;
+
+ for(index = 0; index < BufferLength; index++)
+ {
+ CRC->DR = pBuffer[index];
+ }
+ return (CRC->DR);
+}
+
+/**
+ * @brief Returns the current CRC value.
+ * @param None
+ * @retval 32-bit CRC
+ */
+uint32_t CRC_GetCRC(void)
+{
+ return (CRC->DR);
+}
+
+/**
+ * @brief Stores a 8-bit data in the Independent Data(ID) register.
+ * @param IDValue: 8-bit value to be stored in the ID register
+ * @retval None
+ */
+void CRC_SetIDRegister(uint8_t IDValue)
+{
+ CRC->IDR = IDValue;
+}
+
+/**
+ * @brief Returns the 8-bit data stored in the Independent Data(ID) register
+ * @param None
+ * @retval 8-bit value of the ID register
+ */
+uint8_t CRC_GetIDRegister(void)
+{
+ return (CRC->IDR);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_dac.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_dac.c
new file mode 100644
index 00000000..025b8e28
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_dac.c
@@ -0,0 +1,571 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_dac.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the DAC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_dac.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup DAC
+ * @brief DAC driver modules
+ * @{
+ */
+
+/** @defgroup DAC_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_Defines
+ * @{
+ */
+
+/* CR register Mask */
+#define CR_CLEAR_MASK ((uint32_t)0x00000FFE)
+
+/* DAC Dual Channels SWTRIG masks */
+#define DUAL_SWTRIG_SET ((uint32_t)0x00000003)
+#define DUAL_SWTRIG_RESET ((uint32_t)0xFFFFFFFC)
+
+/* DHR registers offsets */
+#define DHR12R1_OFFSET ((uint32_t)0x00000008)
+#define DHR12R2_OFFSET ((uint32_t)0x00000014)
+#define DHR12RD_OFFSET ((uint32_t)0x00000020)
+
+/* DOR register offset */
+#define DOR_OFFSET ((uint32_t)0x0000002C)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the DAC peripheral registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void DAC_DeInit(void)
+{
+ /* Enable DAC reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE);
+ /* Release DAC from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE);
+}
+
+/**
+ * @brief Initializes the DAC peripheral according to the specified
+ * parameters in the DAC_InitStruct.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_InitStruct: pointer to a DAC_InitTypeDef structure that
+ * contains the configuration information for the specified DAC channel.
+ * @retval None
+ */
+void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct)
+{
+ uint32_t tmpreg1 = 0, tmpreg2 = 0;
+ /* Check the DAC parameters */
+ assert_param(IS_DAC_TRIGGER(DAC_InitStruct->DAC_Trigger));
+ assert_param(IS_DAC_GENERATE_WAVE(DAC_InitStruct->DAC_WaveGeneration));
+ assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude));
+ assert_param(IS_DAC_OUTPUT_BUFFER_STATE(DAC_InitStruct->DAC_OutputBuffer));
+/*---------------------------- DAC CR Configuration --------------------------*/
+ /* Get the DAC CR value */
+ tmpreg1 = DAC->CR;
+ /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
+ tmpreg1 &= ~(CR_CLEAR_MASK << DAC_Channel);
+ /* Configure for the selected DAC channel: buffer output, trigger, wave generation,
+ mask/amplitude for wave generation */
+ /* Set TSELx and TENx bits according to DAC_Trigger value */
+ /* Set WAVEx bits according to DAC_WaveGeneration value */
+ /* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */
+ /* Set BOFFx bit according to DAC_OutputBuffer value */
+ tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration |
+ DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | DAC_InitStruct->DAC_OutputBuffer);
+ /* Calculate CR register value depending on DAC_Channel */
+ tmpreg1 |= tmpreg2 << DAC_Channel;
+ /* Write to DAC CR */
+ DAC->CR = tmpreg1;
+}
+
+/**
+ * @brief Fills each DAC_InitStruct member with its default value.
+ * @param DAC_InitStruct : pointer to a DAC_InitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct)
+{
+/*--------------- Reset DAC init structure parameters values -----------------*/
+ /* Initialize the DAC_Trigger member */
+ DAC_InitStruct->DAC_Trigger = DAC_Trigger_None;
+ /* Initialize the DAC_WaveGeneration member */
+ DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None;
+ /* Initialize the DAC_LFSRUnmask_TriangleAmplitude member */
+ DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0;
+ /* Initialize the DAC_OutputBuffer member */
+ DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable;
+}
+
+/**
+ * @brief Enables or disables the specified DAC channel.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param NewState: new state of the DAC channel.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected DAC channel */
+ DAC->CR |= (DAC_CR_EN1 << DAC_Channel);
+ }
+ else
+ {
+ /* Disable the selected DAC channel */
+ DAC->CR &= ~(DAC_CR_EN1 << DAC_Channel);
+ }
+}
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/**
+ * @brief Enables or disables the specified DAC interrupts.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_IT: specifies the DAC interrupt sources to be enabled or disabled.
+ * This parameter can be the following values:
+ * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask
+ * @param NewState: new state of the specified DAC interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ assert_param(IS_DAC_IT(DAC_IT));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected DAC interrupts */
+ DAC->CR |= (DAC_IT << DAC_Channel);
+ }
+ else
+ {
+ /* Disable the selected DAC interrupts */
+ DAC->CR &= (~(uint32_t)(DAC_IT << DAC_Channel));
+ }
+}
+#endif
+
+/**
+ * @brief Enables or disables the specified DAC channel DMA request.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param NewState: new state of the selected DAC channel DMA request.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected DAC channel DMA request */
+ DAC->CR |= (DAC_CR_DMAEN1 << DAC_Channel);
+ }
+ else
+ {
+ /* Disable the selected DAC channel DMA request */
+ DAC->CR &= ~(DAC_CR_DMAEN1 << DAC_Channel);
+ }
+}
+
+/**
+ * @brief Enables or disables the selected DAC channel software trigger.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param NewState: new state of the selected DAC channel software trigger.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable software trigger for the selected DAC channel */
+ DAC->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4);
+ }
+ else
+ {
+ /* Disable software trigger for the selected DAC channel */
+ DAC->SWTRIGR &= ~((uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4));
+ }
+}
+
+/**
+ * @brief Enables or disables simultaneously the two DAC channels software
+ * triggers.
+ * @param NewState: new state of the DAC channels software triggers.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_DualSoftwareTriggerCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable software trigger for both DAC channels */
+ DAC->SWTRIGR |= DUAL_SWTRIG_SET ;
+ }
+ else
+ {
+ /* Disable software trigger for both DAC channels */
+ DAC->SWTRIGR &= DUAL_SWTRIG_RESET;
+ }
+}
+
+/**
+ * @brief Enables or disables the selected DAC channel wave generation.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_Wave: Specifies the wave type to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg DAC_Wave_Noise: noise wave generation
+ * @arg DAC_Wave_Triangle: triangle wave generation
+ * @param NewState: new state of the selected DAC channel wave generation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_WAVE(DAC_Wave));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected wave generation for the selected DAC channel */
+ DAC->CR |= DAC_Wave << DAC_Channel;
+ }
+ else
+ {
+ /* Disable the selected wave generation for the selected DAC channel */
+ DAC->CR &= ~(DAC_Wave << DAC_Channel);
+ }
+}
+
+/**
+ * @brief Set the specified data holding register value for DAC channel1.
+ * @param DAC_Align: Specifies the data alignment for DAC channel1.
+ * This parameter can be one of the following values:
+ * @arg DAC_Align_8b_R: 8bit right data alignment selected
+ * @arg DAC_Align_12b_L: 12bit left data alignment selected
+ * @arg DAC_Align_12b_R: 12bit right data alignment selected
+ * @param Data : Data to be loaded in the selected data holding register.
+ * @retval None
+ */
+void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_ALIGN(DAC_Align));
+ assert_param(IS_DAC_DATA(Data));
+
+ tmp = (uint32_t)DAC_BASE;
+ tmp += DHR12R1_OFFSET + DAC_Align;
+
+ /* Set the DAC channel1 selected data holding register */
+ *(__IO uint32_t *) tmp = Data;
+}
+
+/**
+ * @brief Set the specified data holding register value for DAC channel2.
+ * @param DAC_Align: Specifies the data alignment for DAC channel2.
+ * This parameter can be one of the following values:
+ * @arg DAC_Align_8b_R: 8bit right data alignment selected
+ * @arg DAC_Align_12b_L: 12bit left data alignment selected
+ * @arg DAC_Align_12b_R: 12bit right data alignment selected
+ * @param Data : Data to be loaded in the selected data holding register.
+ * @retval None
+ */
+void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_ALIGN(DAC_Align));
+ assert_param(IS_DAC_DATA(Data));
+
+ tmp = (uint32_t)DAC_BASE;
+ tmp += DHR12R2_OFFSET + DAC_Align;
+
+ /* Set the DAC channel2 selected data holding register */
+ *(__IO uint32_t *)tmp = Data;
+}
+
+/**
+ * @brief Set the specified data holding register value for dual channel
+ * DAC.
+ * @param DAC_Align: Specifies the data alignment for dual channel DAC.
+ * This parameter can be one of the following values:
+ * @arg DAC_Align_8b_R: 8bit right data alignment selected
+ * @arg DAC_Align_12b_L: 12bit left data alignment selected
+ * @arg DAC_Align_12b_R: 12bit right data alignment selected
+ * @param Data2: Data for DAC Channel2 to be loaded in the selected data
+ * holding register.
+ * @param Data1: Data for DAC Channel1 to be loaded in the selected data
+ * holding register.
+ * @retval None
+ */
+void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1)
+{
+ uint32_t data = 0, tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_ALIGN(DAC_Align));
+ assert_param(IS_DAC_DATA(Data1));
+ assert_param(IS_DAC_DATA(Data2));
+
+ /* Calculate and set dual DAC data holding register value */
+ if (DAC_Align == DAC_Align_8b_R)
+ {
+ data = ((uint32_t)Data2 << 8) | Data1;
+ }
+ else
+ {
+ data = ((uint32_t)Data2 << 16) | Data1;
+ }
+
+ tmp = (uint32_t)DAC_BASE;
+ tmp += DHR12RD_OFFSET + DAC_Align;
+
+ /* Set the dual DAC selected data holding register */
+ *(__IO uint32_t *)tmp = data;
+}
+
+/**
+ * @brief Returns the last data output value of the selected DAC channel.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @retval The selected DAC channel data output value.
+ */
+uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+
+ tmp = (uint32_t) DAC_BASE ;
+ tmp += DOR_OFFSET + ((uint32_t)DAC_Channel >> 2);
+
+ /* Returns the DAC channel data output register value */
+ return (uint16_t) (*(__IO uint32_t*) tmp);
+}
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/**
+ * @brief Checks whether the specified DAC flag is set or not.
+ * @param DAC_Channel: thee selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_FLAG: specifies the flag to check.
+ * This parameter can be only of the following value:
+ * @arg DAC_FLAG_DMAUDR: DMA underrun flag
+ * @retval The new state of DAC_FLAG (SET or RESET).
+ */
+FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_FLAG(DAC_FLAG));
+
+ /* Check the status of the specified DAC flag */
+ if ((DAC->SR & (DAC_FLAG << DAC_Channel)) != (uint8_t)RESET)
+ {
+ /* DAC_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* DAC_FLAG is reset */
+ bitstatus = RESET;
+ }
+ /* Return the DAC_FLAG status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the DAC channelx's pending flags.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_FLAG: specifies the flag to clear.
+ * This parameter can be of the following value:
+ * @arg DAC_FLAG_DMAUDR: DMA underrun flag
+ * @retval None
+ */
+void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_FLAG(DAC_FLAG));
+
+ /* Clear the selected DAC flags */
+ DAC->SR = (DAC_FLAG << DAC_Channel);
+}
+
+/**
+ * @brief Checks whether the specified DAC interrupt has occurred or not.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_IT: specifies the DAC interrupt source to check.
+ * This parameter can be the following values:
+ * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask
+ * @retval The new state of DAC_IT (SET or RESET).
+ */
+ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t enablestatus = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_IT(DAC_IT));
+
+ /* Get the DAC_IT enable bit status */
+ enablestatus = (DAC->CR & (DAC_IT << DAC_Channel)) ;
+
+ /* Check the status of the specified DAC interrupt */
+ if (((DAC->SR & (DAC_IT << DAC_Channel)) != (uint32_t)RESET) && enablestatus)
+ {
+ /* DAC_IT is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* DAC_IT is reset */
+ bitstatus = RESET;
+ }
+ /* Return the DAC_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the DAC channelx's interrupt pending bits.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_IT: specifies the DAC interrupt pending bit to clear.
+ * This parameter can be the following values:
+ * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask
+ * @retval None
+ */
+void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_IT(DAC_IT));
+
+ /* Clear the selected DAC interrupt pending bits */
+ DAC->SR = (DAC_IT << DAC_Channel);
+}
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_dbgmcu.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_dbgmcu.c
new file mode 100644
index 00000000..d34307b0
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_dbgmcu.c
@@ -0,0 +1,162 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_dbgmcu.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the DBGMCU firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_dbgmcu.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup DBGMCU
+ * @brief DBGMCU driver modules
+ * @{
+ */
+
+/** @defgroup DBGMCU_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Private_Defines
+ * @{
+ */
+
+#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF)
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Returns the device revision identifier.
+ * @param None
+ * @retval Device revision identifier
+ */
+uint32_t DBGMCU_GetREVID(void)
+{
+ return(DBGMCU->IDCODE >> 16);
+}
+
+/**
+ * @brief Returns the device identifier.
+ * @param None
+ * @retval Device identifier
+ */
+uint32_t DBGMCU_GetDEVID(void)
+{
+ return(DBGMCU->IDCODE & IDCODE_DEVID_MASK);
+}
+
+/**
+ * @brief Configures the specified peripheral and low power mode behavior
+ * when the MCU under Debug mode.
+ * @param DBGMCU_Periph: specifies the peripheral and low power mode.
+ * This parameter can be any combination of the following values:
+ * @arg DBGMCU_SLEEP: Keep debugger connection during SLEEP mode
+ * @arg DBGMCU_STOP: Keep debugger connection during STOP mode
+ * @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode
+ * @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted
+ * @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted
+ * @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted
+ * @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted
+ * @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted
+ * @arg DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted
+ * @arg DBGMCU_CAN1_STOP: Debug CAN2 stopped when Core is halted
+ * @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when Core is halted
+ * @arg DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped when Core is halted
+ * @arg DBGMCU_TIM5_STOP: TIM5 counter stopped when Core is halted
+ * @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted
+ * @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted
+ * @arg DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted
+ * @arg DBGMCU_CAN2_STOP: Debug CAN2 stopped when Core is halted
+ * @arg DBGMCU_TIM15_STOP: TIM15 counter stopped when Core is halted
+ * @arg DBGMCU_TIM16_STOP: TIM16 counter stopped when Core is halted
+ * @arg DBGMCU_TIM17_STOP: TIM17 counter stopped when Core is halted
+ * @arg DBGMCU_TIM9_STOP: TIM9 counter stopped when Core is halted
+ * @arg DBGMCU_TIM10_STOP: TIM10 counter stopped when Core is halted
+ * @arg DBGMCU_TIM11_STOP: TIM11 counter stopped when Core is halted
+ * @arg DBGMCU_TIM12_STOP: TIM12 counter stopped when Core is halted
+ * @arg DBGMCU_TIM13_STOP: TIM13 counter stopped when Core is halted
+ * @arg DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted
+ * @param NewState: new state of the specified peripheral in Debug mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ DBGMCU->CR |= DBGMCU_Periph;
+ }
+ else
+ {
+ DBGMCU->CR &= ~DBGMCU_Periph;
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_dma.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_dma.c
new file mode 100644
index 00000000..0c86f901
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_dma.c
@@ -0,0 +1,714 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_dma.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the DMA firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_dma.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup DMA
+ * @brief DMA driver modules
+ * @{
+ */
+
+/** @defgroup DMA_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Private_Defines
+ * @{
+ */
+
+
+/* DMA1 Channelx interrupt pending bit masks */
+#define DMA1_Channel1_IT_Mask ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1))
+#define DMA1_Channel2_IT_Mask ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2))
+#define DMA1_Channel3_IT_Mask ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3))
+#define DMA1_Channel4_IT_Mask ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4))
+#define DMA1_Channel5_IT_Mask ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5))
+#define DMA1_Channel6_IT_Mask ((uint32_t)(DMA_ISR_GIF6 | DMA_ISR_TCIF6 | DMA_ISR_HTIF6 | DMA_ISR_TEIF6))
+#define DMA1_Channel7_IT_Mask ((uint32_t)(DMA_ISR_GIF7 | DMA_ISR_TCIF7 | DMA_ISR_HTIF7 | DMA_ISR_TEIF7))
+
+/* DMA2 Channelx interrupt pending bit masks */
+#define DMA2_Channel1_IT_Mask ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1))
+#define DMA2_Channel2_IT_Mask ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2))
+#define DMA2_Channel3_IT_Mask ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3))
+#define DMA2_Channel4_IT_Mask ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4))
+#define DMA2_Channel5_IT_Mask ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5))
+
+/* DMA2 FLAG mask */
+#define FLAG_Mask ((uint32_t)0x10000000)
+
+/* DMA registers Masks */
+#define CCR_CLEAR_Mask ((uint32_t)0xFFFF800F)
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the DMAy Channelx registers to their default reset
+ * values.
+ * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
+ * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+ * @retval None
+ */
+void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+
+ /* Disable the selected DMAy Channelx */
+ DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR1_EN);
+
+ /* Reset DMAy Channelx control register */
+ DMAy_Channelx->CCR = 0;
+
+ /* Reset DMAy Channelx remaining bytes register */
+ DMAy_Channelx->CNDTR = 0;
+
+ /* Reset DMAy Channelx peripheral address register */
+ DMAy_Channelx->CPAR = 0;
+
+ /* Reset DMAy Channelx memory address register */
+ DMAy_Channelx->CMAR = 0;
+
+ if (DMAy_Channelx == DMA1_Channel1)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel1 */
+ DMA1->IFCR |= DMA1_Channel1_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA1_Channel2)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel2 */
+ DMA1->IFCR |= DMA1_Channel2_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA1_Channel3)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel3 */
+ DMA1->IFCR |= DMA1_Channel3_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA1_Channel4)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel4 */
+ DMA1->IFCR |= DMA1_Channel4_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA1_Channel5)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel5 */
+ DMA1->IFCR |= DMA1_Channel5_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA1_Channel6)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel6 */
+ DMA1->IFCR |= DMA1_Channel6_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA1_Channel7)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel7 */
+ DMA1->IFCR |= DMA1_Channel7_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA2_Channel1)
+ {
+ /* Reset interrupt pending bits for DMA2 Channel1 */
+ DMA2->IFCR |= DMA2_Channel1_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA2_Channel2)
+ {
+ /* Reset interrupt pending bits for DMA2 Channel2 */
+ DMA2->IFCR |= DMA2_Channel2_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA2_Channel3)
+ {
+ /* Reset interrupt pending bits for DMA2 Channel3 */
+ DMA2->IFCR |= DMA2_Channel3_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA2_Channel4)
+ {
+ /* Reset interrupt pending bits for DMA2 Channel4 */
+ DMA2->IFCR |= DMA2_Channel4_IT_Mask;
+ }
+ else
+ {
+ if (DMAy_Channelx == DMA2_Channel5)
+ {
+ /* Reset interrupt pending bits for DMA2 Channel5 */
+ DMA2->IFCR |= DMA2_Channel5_IT_Mask;
+ }
+ }
+}
+
+/**
+ * @brief Initializes the DMAy Channelx according to the specified
+ * parameters in the DMA_InitStruct.
+ * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
+ * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+ * @param DMA_InitStruct: pointer to a DMA_InitTypeDef structure that
+ * contains the configuration information for the specified DMA Channel.
+ * @retval None
+ */
+void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+ assert_param(IS_DMA_DIR(DMA_InitStruct->DMA_DIR));
+ assert_param(IS_DMA_BUFFER_SIZE(DMA_InitStruct->DMA_BufferSize));
+ assert_param(IS_DMA_PERIPHERAL_INC_STATE(DMA_InitStruct->DMA_PeripheralInc));
+ assert_param(IS_DMA_MEMORY_INC_STATE(DMA_InitStruct->DMA_MemoryInc));
+ assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(DMA_InitStruct->DMA_PeripheralDataSize));
+ assert_param(IS_DMA_MEMORY_DATA_SIZE(DMA_InitStruct->DMA_MemoryDataSize));
+ assert_param(IS_DMA_MODE(DMA_InitStruct->DMA_Mode));
+ assert_param(IS_DMA_PRIORITY(DMA_InitStruct->DMA_Priority));
+ assert_param(IS_DMA_M2M_STATE(DMA_InitStruct->DMA_M2M));
+
+/*--------------------------- DMAy Channelx CCR Configuration -----------------*/
+ /* Get the DMAy_Channelx CCR value */
+ tmpreg = DMAy_Channelx->CCR;
+ /* Clear MEM2MEM, PL, MSIZE, PSIZE, MINC, PINC, CIRC and DIR bits */
+ tmpreg &= CCR_CLEAR_Mask;
+ /* Configure DMAy Channelx: data transfer, data size, priority level and mode */
+ /* Set DIR bit according to DMA_DIR value */
+ /* Set CIRC bit according to DMA_Mode value */
+ /* Set PINC bit according to DMA_PeripheralInc value */
+ /* Set MINC bit according to DMA_MemoryInc value */
+ /* Set PSIZE bits according to DMA_PeripheralDataSize value */
+ /* Set MSIZE bits according to DMA_MemoryDataSize value */
+ /* Set PL bits according to DMA_Priority value */
+ /* Set the MEM2MEM bit according to DMA_M2M value */
+ tmpreg |= DMA_InitStruct->DMA_DIR | DMA_InitStruct->DMA_Mode |
+ DMA_InitStruct->DMA_PeripheralInc | DMA_InitStruct->DMA_MemoryInc |
+ DMA_InitStruct->DMA_PeripheralDataSize | DMA_InitStruct->DMA_MemoryDataSize |
+ DMA_InitStruct->DMA_Priority | DMA_InitStruct->DMA_M2M;
+
+ /* Write to DMAy Channelx CCR */
+ DMAy_Channelx->CCR = tmpreg;
+
+/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/
+ /* Write to DMAy Channelx CNDTR */
+ DMAy_Channelx->CNDTR = DMA_InitStruct->DMA_BufferSize;
+
+/*--------------------------- DMAy Channelx CPAR Configuration ----------------*/
+ /* Write to DMAy Channelx CPAR */
+ DMAy_Channelx->CPAR = DMA_InitStruct->DMA_PeripheralBaseAddr;
+
+/*--------------------------- DMAy Channelx CMAR Configuration ----------------*/
+ /* Write to DMAy Channelx CMAR */
+ DMAy_Channelx->CMAR = DMA_InitStruct->DMA_MemoryBaseAddr;
+}
+
+/**
+ * @brief Fills each DMA_InitStruct member with its default value.
+ * @param DMA_InitStruct : pointer to a DMA_InitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct)
+{
+/*-------------- Reset DMA init structure parameters values ------------------*/
+ /* Initialize the DMA_PeripheralBaseAddr member */
+ DMA_InitStruct->DMA_PeripheralBaseAddr = 0;
+ /* Initialize the DMA_MemoryBaseAddr member */
+ DMA_InitStruct->DMA_MemoryBaseAddr = 0;
+ /* Initialize the DMA_DIR member */
+ DMA_InitStruct->DMA_DIR = DMA_DIR_PeripheralSRC;
+ /* Initialize the DMA_BufferSize member */
+ DMA_InitStruct->DMA_BufferSize = 0;
+ /* Initialize the DMA_PeripheralInc member */
+ DMA_InitStruct->DMA_PeripheralInc = DMA_PeripheralInc_Disable;
+ /* Initialize the DMA_MemoryInc member */
+ DMA_InitStruct->DMA_MemoryInc = DMA_MemoryInc_Disable;
+ /* Initialize the DMA_PeripheralDataSize member */
+ DMA_InitStruct->DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
+ /* Initialize the DMA_MemoryDataSize member */
+ DMA_InitStruct->DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
+ /* Initialize the DMA_Mode member */
+ DMA_InitStruct->DMA_Mode = DMA_Mode_Normal;
+ /* Initialize the DMA_Priority member */
+ DMA_InitStruct->DMA_Priority = DMA_Priority_Low;
+ /* Initialize the DMA_M2M member */
+ DMA_InitStruct->DMA_M2M = DMA_M2M_Disable;
+}
+
+/**
+ * @brief Enables or disables the specified DMAy Channelx.
+ * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
+ * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+ * @param NewState: new state of the DMAy Channelx.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected DMAy Channelx */
+ DMAy_Channelx->CCR |= DMA_CCR1_EN;
+ }
+ else
+ {
+ /* Disable the selected DMAy Channelx */
+ DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR1_EN);
+ }
+}
+
+/**
+ * @brief Enables or disables the specified DMAy Channelx interrupts.
+ * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
+ * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+ * @param DMA_IT: specifies the DMA interrupts sources to be enabled
+ * or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @param NewState: new state of the specified DMA interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+ assert_param(IS_DMA_CONFIG_IT(DMA_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected DMA interrupts */
+ DMAy_Channelx->CCR |= DMA_IT;
+ }
+ else
+ {
+ /* Disable the selected DMA interrupts */
+ DMAy_Channelx->CCR &= ~DMA_IT;
+ }
+}
+
+/**
+ * @brief Sets the number of data units in the current DMAy Channelx transfer.
+ * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
+ * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+ * @param DataNumber: The number of data units in the current DMAy Channelx
+ * transfer.
+ * @note This function can only be used when the DMAy_Channelx is disabled.
+ * @retval None.
+ */
+void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+
+/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/
+ /* Write to DMAy Channelx CNDTR */
+ DMAy_Channelx->CNDTR = DataNumber;
+}
+
+/**
+ * @brief Returns the number of remaining data units in the current
+ * DMAy Channelx transfer.
+ * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
+ * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+ * @retval The number of remaining data units in the current DMAy Channelx
+ * transfer.
+ */
+uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+ /* Return the number of remaining data units for DMAy Channelx */
+ return ((uint16_t)(DMAy_Channelx->CNDTR));
+}
+
+/**
+ * @brief Checks whether the specified DMAy Channelx flag is set or not.
+ * @param DMAy_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag.
+ * @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag.
+ * @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag.
+ * @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag.
+ * @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag.
+ * @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag.
+ * @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag.
+ * @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag.
+ * @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag.
+ * @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag.
+ * @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag.
+ * @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag.
+ * @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag.
+ * @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag.
+ * @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag.
+ * @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag.
+ * @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag.
+ * @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag.
+ * @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag.
+ * @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag.
+ * @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag.
+ * @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag.
+ * @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag.
+ * @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag.
+ * @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag.
+ * @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag.
+ * @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag.
+ * @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag.
+ * @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag.
+ * @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag.
+ * @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag.
+ * @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag.
+ * @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag.
+ * @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag.
+ * @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag.
+ * @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag.
+ * @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag.
+ * @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag.
+ * @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag.
+ * @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag.
+ * @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag.
+ * @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag.
+ * @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag.
+ * @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag.
+ * @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag.
+ * @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag.
+ * @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag.
+ * @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag.
+ * @retval The new state of DMAy_FLAG (SET or RESET).
+ */
+FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_GET_FLAG(DMAy_FLAG));
+
+ /* Calculate the used DMAy */
+ if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET)
+ {
+ /* Get DMA2 ISR register value */
+ tmpreg = DMA2->ISR ;
+ }
+ else
+ {
+ /* Get DMA1 ISR register value */
+ tmpreg = DMA1->ISR ;
+ }
+
+ /* Check the status of the specified DMAy flag */
+ if ((tmpreg & DMAy_FLAG) != (uint32_t)RESET)
+ {
+ /* DMAy_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* DMAy_FLAG is reset */
+ bitstatus = RESET;
+ }
+
+ /* Return the DMAy_FLAG status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the DMAy Channelx's pending flags.
+ * @param DMAy_FLAG: specifies the flag to clear.
+ * This parameter can be any combination (for the same DMA) of the following values:
+ * @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag.
+ * @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag.
+ * @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag.
+ * @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag.
+ * @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag.
+ * @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag.
+ * @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag.
+ * @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag.
+ * @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag.
+ * @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag.
+ * @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag.
+ * @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag.
+ * @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag.
+ * @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag.
+ * @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag.
+ * @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag.
+ * @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag.
+ * @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag.
+ * @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag.
+ * @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag.
+ * @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag.
+ * @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag.
+ * @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag.
+ * @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag.
+ * @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag.
+ * @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag.
+ * @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag.
+ * @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag.
+ * @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag.
+ * @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag.
+ * @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag.
+ * @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag.
+ * @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag.
+ * @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag.
+ * @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag.
+ * @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag.
+ * @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag.
+ * @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag.
+ * @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag.
+ * @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag.
+ * @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag.
+ * @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag.
+ * @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag.
+ * @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag.
+ * @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag.
+ * @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag.
+ * @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag.
+ * @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag.
+ * @retval None
+ */
+void DMA_ClearFlag(uint32_t DMAy_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_CLEAR_FLAG(DMAy_FLAG));
+
+ /* Calculate the used DMAy */
+ if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET)
+ {
+ /* Clear the selected DMAy flags */
+ DMA2->IFCR = DMAy_FLAG;
+ }
+ else
+ {
+ /* Clear the selected DMAy flags */
+ DMA1->IFCR = DMAy_FLAG;
+ }
+}
+
+/**
+ * @brief Checks whether the specified DMAy Channelx interrupt has occurred or not.
+ * @param DMAy_IT: specifies the DMAy interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt.
+ * @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt.
+ * @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt.
+ * @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt.
+ * @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt.
+ * @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt.
+ * @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt.
+ * @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt.
+ * @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt.
+ * @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt.
+ * @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt.
+ * @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt.
+ * @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt.
+ * @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt.
+ * @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt.
+ * @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt.
+ * @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt.
+ * @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt.
+ * @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt.
+ * @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt.
+ * @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt.
+ * @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt.
+ * @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt.
+ * @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt.
+ * @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt.
+ * @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt.
+ * @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt.
+ * @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt.
+ * @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt.
+ * @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt.
+ * @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt.
+ * @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt.
+ * @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt.
+ * @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt.
+ * @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt.
+ * @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt.
+ * @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt.
+ * @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt.
+ * @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt.
+ * @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt.
+ * @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt.
+ * @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt.
+ * @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt.
+ * @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt.
+ * @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt.
+ * @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt.
+ * @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt.
+ * @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt.
+ * @retval The new state of DMAy_IT (SET or RESET).
+ */
+ITStatus DMA_GetITStatus(uint32_t DMAy_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_GET_IT(DMAy_IT));
+
+ /* Calculate the used DMA */
+ if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET)
+ {
+ /* Get DMA2 ISR register value */
+ tmpreg = DMA2->ISR;
+ }
+ else
+ {
+ /* Get DMA1 ISR register value */
+ tmpreg = DMA1->ISR;
+ }
+
+ /* Check the status of the specified DMAy interrupt */
+ if ((tmpreg & DMAy_IT) != (uint32_t)RESET)
+ {
+ /* DMAy_IT is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* DMAy_IT is reset */
+ bitstatus = RESET;
+ }
+ /* Return the DMA_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the DMAy Channelx's interrupt pending bits.
+ * @param DMAy_IT: specifies the DMAy interrupt pending bit to clear.
+ * This parameter can be any combination (for the same DMA) of the following values:
+ * @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt.
+ * @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt.
+ * @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt.
+ * @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt.
+ * @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt.
+ * @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt.
+ * @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt.
+ * @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt.
+ * @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt.
+ * @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt.
+ * @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt.
+ * @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt.
+ * @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt.
+ * @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt.
+ * @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt.
+ * @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt.
+ * @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt.
+ * @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt.
+ * @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt.
+ * @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt.
+ * @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt.
+ * @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt.
+ * @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt.
+ * @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt.
+ * @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt.
+ * @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt.
+ * @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt.
+ * @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt.
+ * @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt.
+ * @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt.
+ * @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt.
+ * @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt.
+ * @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt.
+ * @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt.
+ * @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt.
+ * @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt.
+ * @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt.
+ * @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt.
+ * @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt.
+ * @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt.
+ * @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt.
+ * @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt.
+ * @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt.
+ * @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt.
+ * @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt.
+ * @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt.
+ * @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt.
+ * @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt.
+ * @retval None
+ */
+void DMA_ClearITPendingBit(uint32_t DMAy_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_CLEAR_IT(DMAy_IT));
+
+ /* Calculate the used DMAy */
+ if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET)
+ {
+ /* Clear the selected DMAy interrupt pending bits */
+ DMA2->IFCR = DMAy_IT;
+ }
+ else
+ {
+ /* Clear the selected DMAy interrupt pending bits */
+ DMA1->IFCR = DMAy_IT;
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_exti.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_exti.c
new file mode 100644
index 00000000..ab734627
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_exti.c
@@ -0,0 +1,269 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_exti.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the EXTI firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_exti.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup EXTI
+ * @brief EXTI driver modules
+ * @{
+ */
+
+/** @defgroup EXTI_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Private_Defines
+ * @{
+ */
+
+#define EXTI_LINENONE ((uint32_t)0x00000) /* No interrupt selected */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the EXTI peripheral registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void EXTI_DeInit(void)
+{
+ EXTI->IMR = 0x00000000;
+ EXTI->EMR = 0x00000000;
+ EXTI->RTSR = 0x00000000;
+ EXTI->FTSR = 0x00000000;
+ EXTI->PR = 0x000FFFFF;
+}
+
+/**
+ * @brief Initializes the EXTI peripheral according to the specified
+ * parameters in the EXTI_InitStruct.
+ * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure
+ * that contains the configuration information for the EXTI peripheral.
+ * @retval None
+ */
+void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct)
+{
+ uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode));
+ assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger));
+ assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line));
+ assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd));
+
+ tmp = (uint32_t)EXTI_BASE;
+
+ if (EXTI_InitStruct->EXTI_LineCmd != DISABLE)
+ {
+ /* Clear EXTI line configuration */
+ EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line;
+ EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line;
+
+ tmp += EXTI_InitStruct->EXTI_Mode;
+
+ *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line;
+
+ /* Clear Rising Falling edge configuration */
+ EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line;
+ EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line;
+
+ /* Select the trigger for the selected external interrupts */
+ if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling)
+ {
+ /* Rising Falling edge */
+ EXTI->RTSR |= EXTI_InitStruct->EXTI_Line;
+ EXTI->FTSR |= EXTI_InitStruct->EXTI_Line;
+ }
+ else
+ {
+ tmp = (uint32_t)EXTI_BASE;
+ tmp += EXTI_InitStruct->EXTI_Trigger;
+
+ *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line;
+ }
+ }
+ else
+ {
+ tmp += EXTI_InitStruct->EXTI_Mode;
+
+ /* Disable the selected external lines */
+ *(__IO uint32_t *) tmp &= ~EXTI_InitStruct->EXTI_Line;
+ }
+}
+
+/**
+ * @brief Fills each EXTI_InitStruct member with its reset value.
+ * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct)
+{
+ EXTI_InitStruct->EXTI_Line = EXTI_LINENONE;
+ EXTI_InitStruct->EXTI_Mode = EXTI_Mode_Interrupt;
+ EXTI_InitStruct->EXTI_Trigger = EXTI_Trigger_Falling;
+ EXTI_InitStruct->EXTI_LineCmd = DISABLE;
+}
+
+/**
+ * @brief Generates a Software interrupt.
+ * @param EXTI_Line: specifies the EXTI lines to be enabled or disabled.
+ * This parameter can be any combination of EXTI_Linex where x can be (0..19).
+ * @retval None
+ */
+void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line)
+{
+ /* Check the parameters */
+ assert_param(IS_EXTI_LINE(EXTI_Line));
+
+ EXTI->SWIER |= EXTI_Line;
+}
+
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param EXTI_Line: specifies the EXTI line flag to check.
+ * This parameter can be:
+ * @arg EXTI_Linex: External interrupt line x where x(0..19)
+ * @retval The new state of EXTI_Line (SET or RESET).
+ */
+FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_GET_EXTI_LINE(EXTI_Line));
+
+ if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the EXTI's line pending flags.
+ * @param EXTI_Line: specifies the EXTI lines flags to clear.
+ * This parameter can be any combination of EXTI_Linex where x can be (0..19).
+ * @retval None
+ */
+void EXTI_ClearFlag(uint32_t EXTI_Line)
+{
+ /* Check the parameters */
+ assert_param(IS_EXTI_LINE(EXTI_Line));
+
+ EXTI->PR = EXTI_Line;
+}
+
+/**
+ * @brief Checks whether the specified EXTI line is asserted or not.
+ * @param EXTI_Line: specifies the EXTI line to check.
+ * This parameter can be:
+ * @arg EXTI_Linex: External interrupt line x where x(0..19)
+ * @retval The new state of EXTI_Line (SET or RESET).
+ */
+ITStatus EXTI_GetITStatus(uint32_t EXTI_Line)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t enablestatus = 0;
+ /* Check the parameters */
+ assert_param(IS_GET_EXTI_LINE(EXTI_Line));
+
+ enablestatus = EXTI->IMR & EXTI_Line;
+ if (((EXTI->PR & EXTI_Line) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET))
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the EXTI's line pending bits.
+ * @param EXTI_Line: specifies the EXTI lines to clear.
+ * This parameter can be any combination of EXTI_Linex where x can be (0..19).
+ * @retval None
+ */
+void EXTI_ClearITPendingBit(uint32_t EXTI_Line)
+{
+ /* Check the parameters */
+ assert_param(IS_EXTI_LINE(EXTI_Line));
+
+ EXTI->PR = EXTI_Line;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_flash.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_flash.c
new file mode 100644
index 00000000..f6c7bf17
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_flash.c
@@ -0,0 +1,1684 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_flash.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the FLASH firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_flash.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup FLASH
+ * @brief FLASH driver modules
+ * @{
+ */
+
+/** @defgroup FLASH_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_Defines
+ * @{
+ */
+
+/* Flash Access Control Register bits */
+#define ACR_LATENCY_Mask ((uint32_t)0x00000038)
+#define ACR_HLFCYA_Mask ((uint32_t)0xFFFFFFF7)
+#define ACR_PRFTBE_Mask ((uint32_t)0xFFFFFFEF)
+
+/* Flash Access Control Register bits */
+#define ACR_PRFTBS_Mask ((uint32_t)0x00000020)
+
+/* Flash Control Register bits */
+#define CR_PG_Set ((uint32_t)0x00000001)
+#define CR_PG_Reset ((uint32_t)0x00001FFE)
+#define CR_PER_Set ((uint32_t)0x00000002)
+#define CR_PER_Reset ((uint32_t)0x00001FFD)
+#define CR_MER_Set ((uint32_t)0x00000004)
+#define CR_MER_Reset ((uint32_t)0x00001FFB)
+#define CR_OPTPG_Set ((uint32_t)0x00000010)
+#define CR_OPTPG_Reset ((uint32_t)0x00001FEF)
+#define CR_OPTER_Set ((uint32_t)0x00000020)
+#define CR_OPTER_Reset ((uint32_t)0x00001FDF)
+#define CR_STRT_Set ((uint32_t)0x00000040)
+#define CR_LOCK_Set ((uint32_t)0x00000080)
+
+/* FLASH Mask */
+#define RDPRT_Mask ((uint32_t)0x00000002)
+#define WRP0_Mask ((uint32_t)0x000000FF)
+#define WRP1_Mask ((uint32_t)0x0000FF00)
+#define WRP2_Mask ((uint32_t)0x00FF0000)
+#define WRP3_Mask ((uint32_t)0xFF000000)
+#define OB_USER_BFB2 ((uint16_t)0x0008)
+
+/* FLASH Keys */
+#define RDP_Key ((uint16_t)0x00A5)
+#define FLASH_KEY1 ((uint32_t)0x45670123)
+#define FLASH_KEY2 ((uint32_t)0xCDEF89AB)
+
+/* FLASH BANK address */
+#define FLASH_BANK1_END_ADDRESS ((uint32_t)0x807FFFF)
+
+/* Delay definition */
+#define EraseTimeout ((uint32_t)0x000B0000)
+#define ProgramTimeout ((uint32_t)0x00002000)
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_Functions
+ * @{
+ */
+
+/**
+@code
+
+ This driver provides functions to configure and program the Flash memory of all STM32F10x devices,
+ including the latest STM32F10x_XL density devices.
+
+ STM32F10x_XL devices feature up to 1 Mbyte with dual bank architecture for read-while-write (RWW) capability:
+ - bank1: fixed size of 512 Kbytes (256 pages of 2Kbytes each)
+ - bank2: up to 512 Kbytes (up to 256 pages of 2Kbytes each)
+ While other STM32F10x devices features only one bank with memory up to 512 Kbytes.
+
+ In version V3.3.0, some functions were updated and new ones were added to support
+ STM32F10x_XL devices. Thus some functions manages all devices, while other are
+ dedicated for XL devices only.
+
+ The table below presents the list of available functions depending on the used STM32F10x devices.
+
+ ***************************************************
+ * Legacy functions used for all STM32F10x devices *
+ ***************************************************
+ +----------------------------------------------------------------------------------------------------------------------------------+
+ | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments |
+ | | devices | devices | |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_SetLatency | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_HalfCycleAccessCmd | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_PrefetchBufferCmd | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_Unlock | Yes | Yes | - For STM32F10X_XL devices: unlock Bank1 and Bank2. |
+ | | | | - For other devices: unlock Bank1 and it is equivalent |
+ | | | | to FLASH_UnlockBank1 function. |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_Lock | Yes | Yes | - For STM32F10X_XL devices: lock Bank1 and Bank2. |
+ | | | | - For other devices: lock Bank1 and it is equivalent |
+ | | | | to FLASH_LockBank1 function. |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ErasePage | Yes | Yes | - For STM32F10x_XL devices: erase a page in Bank1 and Bank2 |
+ | | | | - For other devices: erase a page in Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_EraseAllPages | Yes | Yes | - For STM32F10x_XL devices: erase all pages in Bank1 and Bank2 |
+ | | | | - For other devices: erase all pages in Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_EraseOptionBytes | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ProgramWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ProgramHalfWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ProgramOptionByteData | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_EnableWriteProtection | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ReadOutProtection | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_UserOptionByteConfig | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetUserOptionByte | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetWriteProtectionOptionByte | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetReadOutProtectionStatus | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetPrefetchBufferStatus | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ITConfig | Yes | Yes | - For STM32F10x_XL devices: enable Bank1 and Bank2's interrupts|
+ | | | | - For other devices: enable Bank1's interrupts |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetFlagStatus | Yes | Yes | - For STM32F10x_XL devices: return Bank1 and Bank2's flag status|
+ | | | | - For other devices: return Bank1's flag status |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ClearFlag | Yes | Yes | - For STM32F10x_XL devices: clear Bank1 and Bank2's flag |
+ | | | | - For other devices: clear Bank1's flag |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetStatus | Yes | Yes | - Return the status of Bank1 (for all devices) |
+ | | | | equivalent to FLASH_GetBank1Status function |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_WaitForLastOperation | Yes | Yes | - Wait for Bank1 last operation (for all devices) |
+ | | | | equivalent to: FLASH_WaitForLastBank1Operation function |
+ +----------------------------------------------------------------------------------------------------------------------------------+
+
+ ************************************************************************************************************************
+ * New functions used for all STM32F10x devices to manage Bank1: *
+ * - These functions are mainly useful for STM32F10x_XL density devices, to have separate control for Bank1 and bank2 *
+ * - For other devices, these functions are optional (covered by functions listed above) *
+ ************************************************************************************************************************
+ +----------------------------------------------------------------------------------------------------------------------------------+
+ | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments |
+ | | devices | devices | |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_UnlockBank1 | Yes | Yes | - Unlock Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_LockBank1 | Yes | Yes | - Lock Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_EraseAllBank1Pages | Yes | Yes | - Erase all pages in Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_GetBank1Status | Yes | Yes | - Return the status of Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_WaitForLastBank1Operation | Yes | Yes | - Wait for Bank1 last operation |
+ +----------------------------------------------------------------------------------------------------------------------------------+
+
+ *****************************************************************************
+ * New Functions used only with STM32F10x_XL density devices to manage Bank2 *
+ *****************************************************************************
+ +----------------------------------------------------------------------------------------------------------------------------------+
+ | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments |
+ | | devices | devices | |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_UnlockBank2 | Yes | No | - Unlock Bank2 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_LockBank2 | Yes | No | - Lock Bank2 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_EraseAllBank2Pages | Yes | No | - Erase all pages in Bank2 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_GetBank2Status | Yes | No | - Return the status of Bank2 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_WaitForLastBank2Operation | Yes | No | - Wait for Bank2 last operation |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_BootConfig | Yes | No | - Configure to boot from Bank1 or Bank2 |
+ +----------------------------------------------------------------------------------------------------------------------------------+
+@endcode
+*/
+
+
+/**
+ * @brief Sets the code latency value.
+ * @note This function can be used for all STM32F10x devices.
+ * @param FLASH_Latency: specifies the FLASH Latency value.
+ * This parameter can be one of the following values:
+ * @arg FLASH_Latency_0: FLASH Zero Latency cycle
+ * @arg FLASH_Latency_1: FLASH One Latency cycle
+ * @arg FLASH_Latency_2: FLASH Two Latency cycles
+ * @retval None
+ */
+void FLASH_SetLatency(uint32_t FLASH_Latency)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_LATENCY(FLASH_Latency));
+
+ /* Read the ACR register */
+ tmpreg = FLASH->ACR;
+
+ /* Sets the Latency value */
+ tmpreg &= ACR_LATENCY_Mask;
+ tmpreg |= FLASH_Latency;
+
+ /* Write the ACR register */
+ FLASH->ACR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the Half cycle flash access.
+ * @note This function can be used for all STM32F10x devices.
+ * @param FLASH_HalfCycleAccess: specifies the FLASH Half cycle Access mode.
+ * This parameter can be one of the following values:
+ * @arg FLASH_HalfCycleAccess_Enable: FLASH Half Cycle Enable
+ * @arg FLASH_HalfCycleAccess_Disable: FLASH Half Cycle Disable
+ * @retval None
+ */
+void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_HALFCYCLEACCESS_STATE(FLASH_HalfCycleAccess));
+
+ /* Enable or disable the Half cycle access */
+ FLASH->ACR &= ACR_HLFCYA_Mask;
+ FLASH->ACR |= FLASH_HalfCycleAccess;
+}
+
+/**
+ * @brief Enables or disables the Prefetch Buffer.
+ * @note This function can be used for all STM32F10x devices.
+ * @param FLASH_PrefetchBuffer: specifies the Prefetch buffer status.
+ * This parameter can be one of the following values:
+ * @arg FLASH_PrefetchBuffer_Enable: FLASH Prefetch Buffer Enable
+ * @arg FLASH_PrefetchBuffer_Disable: FLASH Prefetch Buffer Disable
+ * @retval None
+ */
+void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_PREFETCHBUFFER_STATE(FLASH_PrefetchBuffer));
+
+ /* Enable or disable the Prefetch Buffer */
+ FLASH->ACR &= ACR_PRFTBE_Mask;
+ FLASH->ACR |= FLASH_PrefetchBuffer;
+}
+
+/**
+ * @brief Unlocks the FLASH Program Erase Controller.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function unlocks Bank1 and Bank2.
+ * - For all other devices it unlocks Bank1 and it is equivalent
+ * to FLASH_UnlockBank1 function..
+ * @param None
+ * @retval None
+ */
+void FLASH_Unlock(void)
+{
+ /* Authorize the FPEC of Bank1 Access */
+ FLASH->KEYR = FLASH_KEY1;
+ FLASH->KEYR = FLASH_KEY2;
+
+#ifdef STM32F10X_XL
+ /* Authorize the FPEC of Bank2 Access */
+ FLASH->KEYR2 = FLASH_KEY1;
+ FLASH->KEYR2 = FLASH_KEY2;
+#endif /* STM32F10X_XL */
+}
+/**
+ * @brief Unlocks the FLASH Bank1 Program Erase Controller.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function unlocks Bank1.
+ * - For all other devices it unlocks Bank1 and it is
+ * equivalent to FLASH_Unlock function.
+ * @param None
+ * @retval None
+ */
+void FLASH_UnlockBank1(void)
+{
+ /* Authorize the FPEC of Bank1 Access */
+ FLASH->KEYR = FLASH_KEY1;
+ FLASH->KEYR = FLASH_KEY2;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Unlocks the FLASH Bank2 Program Erase Controller.
+ * @note This function can be used only for STM32F10X_XL density devices.
+ * @param None
+ * @retval None
+ */
+void FLASH_UnlockBank2(void)
+{
+ /* Authorize the FPEC of Bank2 Access */
+ FLASH->KEYR2 = FLASH_KEY1;
+ FLASH->KEYR2 = FLASH_KEY2;
+
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @brief Locks the FLASH Program Erase Controller.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function Locks Bank1 and Bank2.
+ * - For all other devices it Locks Bank1 and it is equivalent
+ * to FLASH_LockBank1 function.
+ * @param None
+ * @retval None
+ */
+void FLASH_Lock(void)
+{
+ /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */
+ FLASH->CR |= CR_LOCK_Set;
+
+#ifdef STM32F10X_XL
+ /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */
+ FLASH->CR2 |= CR_LOCK_Set;
+#endif /* STM32F10X_XL */
+}
+
+/**
+ * @brief Locks the FLASH Bank1 Program Erase Controller.
+ * @note this function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function Locks Bank1.
+ * - For all other devices it Locks Bank1 and it is equivalent
+ * to FLASH_Lock function.
+ * @param None
+ * @retval None
+ */
+void FLASH_LockBank1(void)
+{
+ /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */
+ FLASH->CR |= CR_LOCK_Set;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Locks the FLASH Bank2 Program Erase Controller.
+ * @note This function can be used only for STM32F10X_XL density devices.
+ * @param None
+ * @retval None
+ */
+void FLASH_LockBank2(void)
+{
+ /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */
+ FLASH->CR2 |= CR_LOCK_Set;
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @brief Erases a specified FLASH page.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Page_Address: The page address to be erased.
+ * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ErasePage(uint32_t Page_Address)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Page_Address));
+
+#ifdef STM32F10X_XL
+ if(Page_Address < FLASH_BANK1_END_ADDRESS)
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase the page */
+ FLASH->CR|= CR_PER_Set;
+ FLASH->AR = Page_Address;
+ FLASH->CR|= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ /* Disable the PER Bit */
+ FLASH->CR &= CR_PER_Reset;
+ }
+ }
+ else
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase the page */
+ FLASH->CR2|= CR_PER_Set;
+ FLASH->AR2 = Page_Address;
+ FLASH->CR2|= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+
+ /* Disable the PER Bit */
+ FLASH->CR2 &= CR_PER_Reset;
+ }
+ }
+#else
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase the page */
+ FLASH->CR|= CR_PER_Set;
+ FLASH->AR = Page_Address;
+ FLASH->CR|= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ /* Disable the PER Bit */
+ FLASH->CR &= CR_PER_Reset;
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the Erase Status */
+ return status;
+}
+
+/**
+ * @brief Erases all FLASH pages.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EraseAllPages(void)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+#ifdef STM32F10X_XL
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR |= CR_MER_Set;
+ FLASH->CR |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR &= CR_MER_Reset;
+ }
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR2 |= CR_MER_Set;
+ FLASH->CR2 |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR2 &= CR_MER_Reset;
+ }
+#else
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR |= CR_MER_Set;
+ FLASH->CR |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR &= CR_MER_Reset;
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the Erase Status */
+ return status;
+}
+
+/**
+ * @brief Erases all Bank1 FLASH pages.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function erases all Bank1 pages.
+ * - For all other devices it erases all Bank1 pages and it is equivalent
+ * to FLASH_EraseAllPages function.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EraseAllBank1Pages(void)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR |= CR_MER_Set;
+ FLASH->CR |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR &= CR_MER_Reset;
+ }
+ /* Return the Erase Status */
+ return status;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Erases all Bank2 FLASH pages.
+ * @note This function can be used only for STM32F10x_XL density devices.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EraseAllBank2Pages(void)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR2 |= CR_MER_Set;
+ FLASH->CR2 |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR2 &= CR_MER_Reset;
+ }
+ /* Return the Erase Status */
+ return status;
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @brief Erases the FLASH option bytes.
+ * @note This functions erases all option bytes except the Read protection (RDP).
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EraseOptionBytes(void)
+{
+ uint16_t rdptmp = RDP_Key;
+
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Get the actual read protection Option Byte value */
+ if(FLASH_GetReadOutProtectionStatus() != RESET)
+ {
+ rdptmp = 0x00;
+ }
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* Authorize the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+
+ /* if the previous operation is completed, proceed to erase the option bytes */
+ FLASH->CR |= CR_OPTER_Set;
+ FLASH->CR |= CR_STRT_Set;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the erase operation is completed, disable the OPTER Bit */
+ FLASH->CR &= CR_OPTER_Reset;
+
+ /* Enable the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+ /* Restore the last read protection Option Byte value */
+ OB->RDP = (uint16_t)rdptmp;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ else
+ {
+ if (status != FLASH_TIMEOUT)
+ {
+ /* Disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ }
+ /* Return the erase status */
+ return status;
+}
+
+/**
+ * @brief Programs a word at a specified address.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Address: specifies the address to be programmed.
+ * @param Data: specifies the data to be programmed.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+#ifdef STM32F10X_XL
+ if(Address < FLASH_BANK1_END_ADDRESS - 2)
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new first
+ half word */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = (uint16_t)Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new second
+ half word */
+ tmp = Address + 2;
+
+ *(__IO uint16_t*) tmp = Data >> 16;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ }
+ }
+ else if(Address == (FLASH_BANK1_END_ADDRESS - 1))
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new first
+ half word */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = (uint16_t)Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new second
+ half word */
+ FLASH->CR2 |= CR_PG_Set;
+ tmp = Address + 2;
+
+ *(__IO uint16_t*) tmp = Data >> 16;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ }
+ else
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new first
+ half word */
+ FLASH->CR2 |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = (uint16_t)Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new second
+ half word */
+ tmp = Address + 2;
+
+ *(__IO uint16_t*) tmp = Data >> 16;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ }
+ }
+#else
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new first
+ half word */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = (uint16_t)Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new second
+ half word */
+ tmp = Address + 2;
+
+ *(__IO uint16_t*) tmp = Data >> 16;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the Program Status */
+ return status;
+}
+
+/**
+ * @brief Programs a half word at a specified address.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Address: specifies the address to be programmed.
+ * @param Data: specifies the data to be programmed.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+#ifdef STM32F10X_XL
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(Address < FLASH_BANK1_END_ADDRESS)
+ {
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new data */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ }
+ else
+ {
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new data */
+ FLASH->CR2 |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ }
+#else
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new data */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the Program Status */
+ return status;
+}
+
+/**
+ * @brief Programs a half word at a specified Option Byte Data address.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Address: specifies the address to be programmed.
+ * This parameter can be 0x1FFFF804 or 0x1FFFF806.
+ * @param Data: specifies the data to be programmed.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Check the parameters */
+ assert_param(IS_OB_DATA_ADDRESS(Address));
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* Authorize the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+ /* Enables the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+ *(__IO uint16_t*)Address = Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ /* Return the Option Byte Data Program Status */
+ return status;
+}
+
+/**
+ * @brief Write protects the desired pages
+ * @note This function can be used for all STM32F10x devices.
+ * @param FLASH_Pages: specifies the address of the pages to be write protected.
+ * This parameter can be:
+ * @arg For @b STM32_Low-density_devices: value between FLASH_WRProt_Pages0to3 and FLASH_WRProt_Pages28to31
+ * @arg For @b STM32_Medium-density_devices: value between FLASH_WRProt_Pages0to3
+ * and FLASH_WRProt_Pages124to127
+ * @arg For @b STM32_High-density_devices: value between FLASH_WRProt_Pages0to1 and
+ * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to255
+ * @arg For @b STM32_Connectivity_line_devices: value between FLASH_WRProt_Pages0to1 and
+ * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to127
+ * @arg For @b STM32_XL-density_devices: value between FLASH_WRProt_Pages0to1 and
+ * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to511
+ * @arg FLASH_WRProt_AllPages
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages)
+{
+ uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF;
+
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_WRPROT_PAGE(FLASH_Pages));
+
+ FLASH_Pages = (uint32_t)(~FLASH_Pages);
+ WRP0_Data = (uint16_t)(FLASH_Pages & WRP0_Mask);
+ WRP1_Data = (uint16_t)((FLASH_Pages & WRP1_Mask) >> 8);
+ WRP2_Data = (uint16_t)((FLASH_Pages & WRP2_Mask) >> 16);
+ WRP3_Data = (uint16_t)((FLASH_Pages & WRP3_Mask) >> 24);
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* Authorizes the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+ FLASH->CR |= CR_OPTPG_Set;
+ if(WRP0_Data != 0xFF)
+ {
+ OB->WRP0 = WRP0_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ }
+ if((status == FLASH_COMPLETE) && (WRP1_Data != 0xFF))
+ {
+ OB->WRP1 = WRP1_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ }
+ if((status == FLASH_COMPLETE) && (WRP2_Data != 0xFF))
+ {
+ OB->WRP2 = WRP2_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ }
+
+ if((status == FLASH_COMPLETE)&& (WRP3_Data != 0xFF))
+ {
+ OB->WRP3 = WRP3_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ }
+
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ /* Return the write protection operation Status */
+ return status;
+}
+
+/**
+ * @brief Enables or disables the read out protection.
+ * @note If the user has already programmed the other option bytes before calling
+ * this function, he must re-program them since this function erases all option bytes.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Newstate: new state of the ReadOut Protection.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* Authorizes the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+ FLASH->CR |= CR_OPTER_Set;
+ FLASH->CR |= CR_STRT_Set;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the erase operation is completed, disable the OPTER Bit */
+ FLASH->CR &= CR_OPTER_Reset;
+ /* Enable the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+ if(NewState != DISABLE)
+ {
+ OB->RDP = 0x00;
+ }
+ else
+ {
+ OB->RDP = RDP_Key;
+ }
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ else
+ {
+ if(status != FLASH_TIMEOUT)
+ {
+ /* Disable the OPTER Bit */
+ FLASH->CR &= CR_OPTER_Reset;
+ }
+ }
+ }
+ /* Return the protection operation Status */
+ return status;
+}
+
+/**
+ * @brief Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.
+ * @note This function can be used for all STM32F10x devices.
+ * @param OB_IWDG: Selects the IWDG mode
+ * This parameter can be one of the following values:
+ * @arg OB_IWDG_SW: Software IWDG selected
+ * @arg OB_IWDG_HW: Hardware IWDG selected
+ * @param OB_STOP: Reset event when entering STOP mode.
+ * This parameter can be one of the following values:
+ * @arg OB_STOP_NoRST: No reset generated when entering in STOP
+ * @arg OB_STOP_RST: Reset generated when entering in STOP
+ * @param OB_STDBY: Reset event when entering Standby mode.
+ * This parameter can be one of the following values:
+ * @arg OB_STDBY_NoRST: No reset generated when entering in STANDBY
+ * @arg OB_STDBY_RST: Reset generated when entering in STANDBY
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check the parameters */
+ assert_param(IS_OB_IWDG_SOURCE(OB_IWDG));
+ assert_param(IS_OB_STOP_SOURCE(OB_STOP));
+ assert_param(IS_OB_STDBY_SOURCE(OB_STDBY));
+
+ /* Authorize the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* Enable the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+
+ OB->USER = OB_IWDG | (uint16_t)(OB_STOP | (uint16_t)(OB_STDBY | ((uint16_t)0xF8)));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ /* Return the Option Byte program Status */
+ return status;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Configures to boot from Bank1 or Bank2.
+ * @note This function can be used only for STM32F10x_XL density devices.
+ * @param FLASH_BOOT: select the FLASH Bank to boot from.
+ * This parameter can be one of the following values:
+ * @arg FLASH_BOOT_Bank1: At startup, if boot pins are set in boot from user Flash
+ * position and this parameter is selected the device will boot from Bank1(Default).
+ * @arg FLASH_BOOT_Bank2: At startup, if boot pins are set in boot from user Flash
+ * position and this parameter is selected the device will boot from Bank2 or Bank1,
+ * depending on the activation of the bank. The active banks are checked in
+ * the following order: Bank2, followed by Bank1.
+ * The active bank is recognized by the value programmed at the base address
+ * of the respective bank (corresponding to the initial stack pointer value
+ * in the interrupt vector table).
+ * For more information, please refer to AN2606 from www.st.com.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ assert_param(IS_FLASH_BOOT(FLASH_BOOT));
+ /* Authorize the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* Enable the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+
+ if(FLASH_BOOT == FLASH_BOOT_Bank1)
+ {
+ OB->USER |= OB_USER_BFB2;
+ }
+ else
+ {
+ OB->USER &= (uint16_t)(~(uint16_t)(OB_USER_BFB2));
+ }
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ /* Return the Option Byte program Status */
+ return status;
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @brief Returns the FLASH User Option Bytes values.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1)
+ * and RST_STDBY(Bit2).
+ */
+uint32_t FLASH_GetUserOptionByte(void)
+{
+ /* Return the User Option Byte */
+ return (uint32_t)(FLASH->OBR >> 2);
+}
+
+/**
+ * @brief Returns the FLASH Write Protection Option Bytes Register value.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval The FLASH Write Protection Option Bytes Register value
+ */
+uint32_t FLASH_GetWriteProtectionOptionByte(void)
+{
+ /* Return the Flash write protection Register value */
+ return (uint32_t)(FLASH->WRPR);
+}
+
+/**
+ * @brief Checks whether the FLASH Read Out Protection Status is set or not.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval FLASH ReadOut Protection Status(SET or RESET)
+ */
+FlagStatus FLASH_GetReadOutProtectionStatus(void)
+{
+ FlagStatus readoutstatus = RESET;
+ if ((FLASH->OBR & RDPRT_Mask) != (uint32_t)RESET)
+ {
+ readoutstatus = SET;
+ }
+ else
+ {
+ readoutstatus = RESET;
+ }
+ return readoutstatus;
+}
+
+/**
+ * @brief Checks whether the FLASH Prefetch Buffer status is set or not.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval FLASH Prefetch Buffer Status (SET or RESET).
+ */
+FlagStatus FLASH_GetPrefetchBufferStatus(void)
+{
+ FlagStatus bitstatus = RESET;
+
+ if ((FLASH->ACR & ACR_PRFTBS_Mask) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ /* Return the new state of FLASH Prefetch Buffer Status (SET or RESET) */
+ return bitstatus;
+}
+
+/**
+ * @brief Enables or disables the specified FLASH interrupts.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices, enables or disables the specified FLASH interrupts
+ for Bank1 and Bank2.
+ * - For other devices it enables or disables the specified FLASH interrupts for Bank1.
+ * @param FLASH_IT: specifies the FLASH interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_ERROR: FLASH Error Interrupt
+ * @arg FLASH_IT_EOP: FLASH end of operation Interrupt
+ * @param NewState: new state of the specified Flash interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState)
+{
+#ifdef STM32F10X_XL
+ /* Check the parameters */
+ assert_param(IS_FLASH_IT(FLASH_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if((FLASH_IT & 0x80000000) != 0x0)
+ {
+ if(NewState != DISABLE)
+ {
+ /* Enable the interrupt sources */
+ FLASH->CR2 |= (FLASH_IT & 0x7FFFFFFF);
+ }
+ else
+ {
+ /* Disable the interrupt sources */
+ FLASH->CR2 &= ~(uint32_t)(FLASH_IT & 0x7FFFFFFF);
+ }
+ }
+ else
+ {
+ if(NewState != DISABLE)
+ {
+ /* Enable the interrupt sources */
+ FLASH->CR |= FLASH_IT;
+ }
+ else
+ {
+ /* Disable the interrupt sources */
+ FLASH->CR &= ~(uint32_t)FLASH_IT;
+ }
+ }
+#else
+ /* Check the parameters */
+ assert_param(IS_FLASH_IT(FLASH_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if(NewState != DISABLE)
+ {
+ /* Enable the interrupt sources */
+ FLASH->CR |= FLASH_IT;
+ }
+ else
+ {
+ /* Disable the interrupt sources */
+ FLASH->CR &= ~(uint32_t)FLASH_IT;
+ }
+#endif /* STM32F10X_XL */
+}
+
+/**
+ * @brief Checks whether the specified FLASH flag is set or not.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices, this function checks whether the specified
+ * Bank1 or Bank2 flag is set or not.
+ * - For other devices, it checks whether the specified Bank1 flag is
+ * set or not.
+ * @param FLASH_FLAG: specifies the FLASH flag to check.
+ * This parameter can be one of the following values:
+ * @arg FLASH_FLAG_BSY: FLASH Busy flag
+ * @arg FLASH_FLAG_PGERR: FLASH Program error flag
+ * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_EOP: FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPTERR: FLASH Option Byte error flag
+ * @retval The new state of FLASH_FLAG (SET or RESET).
+ */
+FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+
+#ifdef STM32F10X_XL
+ /* Check the parameters */
+ assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ;
+ if(FLASH_FLAG == FLASH_FLAG_OPTERR)
+ {
+ if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+ else
+ {
+ if((FLASH_FLAG & 0x80000000) != 0x0)
+ {
+ if((FLASH->SR2 & FLASH_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+ }
+#else
+ /* Check the parameters */
+ assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ;
+ if(FLASH_FLAG == FLASH_FLAG_OPTERR)
+ {
+ if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the new state of FLASH_FLAG (SET or RESET) */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the FLASH's pending flags.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices, this function clears Bank1 or Bank2’s pending flags
+ * - For other devices, it clears Bank1’s pending flags.
+ * @param FLASH_FLAG: specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_FLAG_PGERR: FLASH Program error flag
+ * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_EOP: FLASH End of Operation flag
+ * @retval None
+ */
+void FLASH_ClearFlag(uint32_t FLASH_FLAG)
+{
+#ifdef STM32F10X_XL
+ /* Check the parameters */
+ assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ;
+
+ if((FLASH_FLAG & 0x80000000) != 0x0)
+ {
+ /* Clear the flags */
+ FLASH->SR2 = FLASH_FLAG;
+ }
+ else
+ {
+ /* Clear the flags */
+ FLASH->SR = FLASH_FLAG;
+ }
+
+#else
+ /* Check the parameters */
+ assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ;
+
+ /* Clear the flags */
+ FLASH->SR = FLASH_FLAG;
+#endif /* STM32F10X_XL */
+}
+
+/**
+ * @brief Returns the FLASH Status.
+ * @note This function can be used for all STM32F10x devices, it is equivalent
+ * to FLASH_GetBank1Status function.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP or FLASH_COMPLETE
+ */
+FLASH_Status FLASH_GetStatus(void)
+{
+ FLASH_Status flashstatus = FLASH_COMPLETE;
+
+ if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY)
+ {
+ flashstatus = FLASH_BUSY;
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG_PGERR) != 0)
+ {
+ flashstatus = FLASH_ERROR_PG;
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG_WRPRTERR) != 0 )
+ {
+ flashstatus = FLASH_ERROR_WRP;
+ }
+ else
+ {
+ flashstatus = FLASH_COMPLETE;
+ }
+ }
+ }
+ /* Return the Flash Status */
+ return flashstatus;
+}
+
+/**
+ * @brief Returns the FLASH Bank1 Status.
+ * @note This function can be used for all STM32F10x devices, it is equivalent
+ * to FLASH_GetStatus function.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP or FLASH_COMPLETE
+ */
+FLASH_Status FLASH_GetBank1Status(void)
+{
+ FLASH_Status flashstatus = FLASH_COMPLETE;
+
+ if((FLASH->SR & FLASH_FLAG_BANK1_BSY) == FLASH_FLAG_BSY)
+ {
+ flashstatus = FLASH_BUSY;
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG_BANK1_PGERR) != 0)
+ {
+ flashstatus = FLASH_ERROR_PG;
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG_BANK1_WRPRTERR) != 0 )
+ {
+ flashstatus = FLASH_ERROR_WRP;
+ }
+ else
+ {
+ flashstatus = FLASH_COMPLETE;
+ }
+ }
+ }
+ /* Return the Flash Status */
+ return flashstatus;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Returns the FLASH Bank2 Status.
+ * @note This function can be used for STM32F10x_XL density devices.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP or FLASH_COMPLETE
+ */
+FLASH_Status FLASH_GetBank2Status(void)
+{
+ FLASH_Status flashstatus = FLASH_COMPLETE;
+
+ if((FLASH->SR2 & (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF))
+ {
+ flashstatus = FLASH_BUSY;
+ }
+ else
+ {
+ if((FLASH->SR2 & (FLASH_FLAG_BANK2_PGERR & 0x7FFFFFFF)) != 0)
+ {
+ flashstatus = FLASH_ERROR_PG;
+ }
+ else
+ {
+ if((FLASH->SR2 & (FLASH_FLAG_BANK2_WRPRTERR & 0x7FFFFFFF)) != 0 )
+ {
+ flashstatus = FLASH_ERROR_WRP;
+ }
+ else
+ {
+ flashstatus = FLASH_COMPLETE;
+ }
+ }
+ }
+ /* Return the Flash Status */
+ return flashstatus;
+}
+#endif /* STM32F10X_XL */
+/**
+ * @brief Waits for a Flash operation to complete or a TIMEOUT to occur.
+ * @note This function can be used for all STM32F10x devices,
+ * it is equivalent to FLASH_WaitForLastBank1Operation.
+ * - For STM32F10X_XL devices this function waits for a Bank1 Flash operation
+ * to complete or a TIMEOUT to occur.
+ * - For all other devices it waits for a Flash operation to complete
+ * or a TIMEOUT to occur.
+ * @param Timeout: FLASH programming Timeout
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check for the Flash Status */
+ status = FLASH_GetBank1Status();
+ /* Wait for a Flash operation to complete or a TIMEOUT to occur */
+ while((status == FLASH_BUSY) && (Timeout != 0x00))
+ {
+ status = FLASH_GetBank1Status();
+ Timeout--;
+ }
+ if(Timeout == 0x00 )
+ {
+ status = FLASH_TIMEOUT;
+ }
+ /* Return the operation status */
+ return status;
+}
+
+/**
+ * @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur.
+ * @note This function can be used for all STM32F10x devices,
+ * it is equivalent to FLASH_WaitForLastOperation.
+ * @param Timeout: FLASH programming Timeout
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check for the Flash Status */
+ status = FLASH_GetBank1Status();
+ /* Wait for a Flash operation to complete or a TIMEOUT to occur */
+ while((status == FLASH_FLAG_BANK1_BSY) && (Timeout != 0x00))
+ {
+ status = FLASH_GetBank1Status();
+ Timeout--;
+ }
+ if(Timeout == 0x00 )
+ {
+ status = FLASH_TIMEOUT;
+ }
+ /* Return the operation status */
+ return status;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur.
+ * @note This function can be used only for STM32F10x_XL density devices.
+ * @param Timeout: FLASH programming Timeout
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check for the Flash Status */
+ status = FLASH_GetBank2Status();
+ /* Wait for a Flash operation to complete or a TIMEOUT to occur */
+ while((status == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) && (Timeout != 0x00))
+ {
+ status = FLASH_GetBank2Status();
+ Timeout--;
+ }
+ if(Timeout == 0x00 )
+ {
+ status = FLASH_TIMEOUT;
+ }
+ /* Return the operation status */
+ return status;
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_fsmc.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_fsmc.c
new file mode 100644
index 00000000..c75137ca
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_fsmc.c
@@ -0,0 +1,866 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_fsmc.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the FSMC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_fsmc.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup FSMC
+ * @brief FSMC driver modules
+ * @{
+ */
+
+/** @defgroup FSMC_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Private_Defines
+ * @{
+ */
+
+/* --------------------- FSMC registers bit mask ---------------------------- */
+
+/* FSMC BCRx Mask */
+#define BCR_MBKEN_Set ((uint32_t)0x00000001)
+#define BCR_MBKEN_Reset ((uint32_t)0x000FFFFE)
+#define BCR_FACCEN_Set ((uint32_t)0x00000040)
+
+/* FSMC PCRx Mask */
+#define PCR_PBKEN_Set ((uint32_t)0x00000004)
+#define PCR_PBKEN_Reset ((uint32_t)0x000FFFFB)
+#define PCR_ECCEN_Set ((uint32_t)0x00000040)
+#define PCR_ECCEN_Reset ((uint32_t)0x000FFFBF)
+#define PCR_MemoryType_NAND ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the FSMC NOR/SRAM Banks registers to their default
+ * reset values.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1
+ * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2
+ * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3
+ * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4
+ * @retval None
+ */
+void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank)
+{
+ /* Check the parameter */
+ assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank));
+
+ /* FSMC_Bank1_NORSRAM1 */
+ if(FSMC_Bank == FSMC_Bank1_NORSRAM1)
+ {
+ FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030DB;
+ }
+ /* FSMC_Bank1_NORSRAM2, FSMC_Bank1_NORSRAM3 or FSMC_Bank1_NORSRAM4 */
+ else
+ {
+ FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030D2;
+ }
+ FSMC_Bank1->BTCR[FSMC_Bank + 1] = 0x0FFFFFFF;
+ FSMC_Bank1E->BWTR[FSMC_Bank] = 0x0FFFFFFF;
+}
+
+/**
+ * @brief Deinitializes the FSMC NAND Banks registers to their default reset values.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @retval None
+ */
+void FSMC_NANDDeInit(uint32_t FSMC_Bank)
+{
+ /* Check the parameter */
+ assert_param(IS_FSMC_NAND_BANK(FSMC_Bank));
+
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ /* Set the FSMC_Bank2 registers to their reset values */
+ FSMC_Bank2->PCR2 = 0x00000018;
+ FSMC_Bank2->SR2 = 0x00000040;
+ FSMC_Bank2->PMEM2 = 0xFCFCFCFC;
+ FSMC_Bank2->PATT2 = 0xFCFCFCFC;
+ }
+ /* FSMC_Bank3_NAND */
+ else
+ {
+ /* Set the FSMC_Bank3 registers to their reset values */
+ FSMC_Bank3->PCR3 = 0x00000018;
+ FSMC_Bank3->SR3 = 0x00000040;
+ FSMC_Bank3->PMEM3 = 0xFCFCFCFC;
+ FSMC_Bank3->PATT3 = 0xFCFCFCFC;
+ }
+}
+
+/**
+ * @brief Deinitializes the FSMC PCCARD Bank registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void FSMC_PCCARDDeInit(void)
+{
+ /* Set the FSMC_Bank4 registers to their reset values */
+ FSMC_Bank4->PCR4 = 0x00000018;
+ FSMC_Bank4->SR4 = 0x00000000;
+ FSMC_Bank4->PMEM4 = 0xFCFCFCFC;
+ FSMC_Bank4->PATT4 = 0xFCFCFCFC;
+ FSMC_Bank4->PIO4 = 0xFCFCFCFC;
+}
+
+/**
+ * @brief Initializes the FSMC NOR/SRAM Banks according to the specified
+ * parameters in the FSMC_NORSRAMInitStruct.
+ * @param FSMC_NORSRAMInitStruct : pointer to a FSMC_NORSRAMInitTypeDef
+ * structure that contains the configuration information for
+ * the FSMC NOR/SRAM specified Banks.
+ * @retval None
+ */
+void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_BANK(FSMC_NORSRAMInitStruct->FSMC_Bank));
+ assert_param(IS_FSMC_MUX(FSMC_NORSRAMInitStruct->FSMC_DataAddressMux));
+ assert_param(IS_FSMC_MEMORY(FSMC_NORSRAMInitStruct->FSMC_MemoryType));
+ assert_param(IS_FSMC_MEMORY_WIDTH(FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth));
+ assert_param(IS_FSMC_BURSTMODE(FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode));
+ assert_param(IS_FSMC_ASYNWAIT(FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait));
+ assert_param(IS_FSMC_WAIT_POLARITY(FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity));
+ assert_param(IS_FSMC_WRAP_MODE(FSMC_NORSRAMInitStruct->FSMC_WrapMode));
+ assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive));
+ assert_param(IS_FSMC_WRITE_OPERATION(FSMC_NORSRAMInitStruct->FSMC_WriteOperation));
+ assert_param(IS_FSMC_WAITE_SIGNAL(FSMC_NORSRAMInitStruct->FSMC_WaitSignal));
+ assert_param(IS_FSMC_EXTENDED_MODE(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode));
+ assert_param(IS_FSMC_WRITE_BURST(FSMC_NORSRAMInitStruct->FSMC_WriteBurst));
+ assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime));
+ assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime));
+ assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime));
+ assert_param(IS_FSMC_TURNAROUND_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration));
+ assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision));
+ assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency));
+ assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode));
+
+ /* Bank1 NOR/SRAM control register configuration */
+ FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] =
+ (uint32_t)FSMC_NORSRAMInitStruct->FSMC_DataAddressMux |
+ FSMC_NORSRAMInitStruct->FSMC_MemoryType |
+ FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth |
+ FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode |
+ FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait |
+ FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity |
+ FSMC_NORSRAMInitStruct->FSMC_WrapMode |
+ FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive |
+ FSMC_NORSRAMInitStruct->FSMC_WriteOperation |
+ FSMC_NORSRAMInitStruct->FSMC_WaitSignal |
+ FSMC_NORSRAMInitStruct->FSMC_ExtendedMode |
+ FSMC_NORSRAMInitStruct->FSMC_WriteBurst;
+
+ if(FSMC_NORSRAMInitStruct->FSMC_MemoryType == FSMC_MemoryType_NOR)
+ {
+ FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] |= (uint32_t)BCR_FACCEN_Set;
+ }
+
+ /* Bank1 NOR/SRAM timing register configuration */
+ FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank+1] =
+ (uint32_t)FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime |
+ (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime << 4) |
+ (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime << 8) |
+ (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration << 16) |
+ (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision << 20) |
+ (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency << 24) |
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode;
+
+
+ /* Bank1 NOR/SRAM timing register for write configuration, if extended mode is used */
+ if(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode == FSMC_ExtendedMode_Enable)
+ {
+ assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime));
+ assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime));
+ assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime));
+ assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision));
+ assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency));
+ assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode));
+ FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] =
+ (uint32_t)FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime |
+ (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime << 4 )|
+ (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime << 8) |
+ (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision << 20) |
+ (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency << 24) |
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode;
+ }
+ else
+ {
+ FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = 0x0FFFFFFF;
+ }
+}
+
+/**
+ * @brief Initializes the FSMC NAND Banks according to the specified
+ * parameters in the FSMC_NANDInitStruct.
+ * @param FSMC_NANDInitStruct : pointer to a FSMC_NANDInitTypeDef
+ * structure that contains the configuration information for the FSMC
+ * NAND specified Banks.
+ * @retval None
+ */
+void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct)
+{
+ uint32_t tmppcr = 0x00000000, tmppmem = 0x00000000, tmppatt = 0x00000000;
+
+ /* Check the parameters */
+ assert_param( IS_FSMC_NAND_BANK(FSMC_NANDInitStruct->FSMC_Bank));
+ assert_param( IS_FSMC_WAIT_FEATURE(FSMC_NANDInitStruct->FSMC_Waitfeature));
+ assert_param( IS_FSMC_MEMORY_WIDTH(FSMC_NANDInitStruct->FSMC_MemoryDataWidth));
+ assert_param( IS_FSMC_ECC_STATE(FSMC_NANDInitStruct->FSMC_ECC));
+ assert_param( IS_FSMC_ECCPAGE_SIZE(FSMC_NANDInitStruct->FSMC_ECCPageSize));
+ assert_param( IS_FSMC_TCLR_TIME(FSMC_NANDInitStruct->FSMC_TCLRSetupTime));
+ assert_param( IS_FSMC_TAR_TIME(FSMC_NANDInitStruct->FSMC_TARSetupTime));
+ assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime));
+ assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime));
+
+ /* Set the tmppcr value according to FSMC_NANDInitStruct parameters */
+ tmppcr = (uint32_t)FSMC_NANDInitStruct->FSMC_Waitfeature |
+ PCR_MemoryType_NAND |
+ FSMC_NANDInitStruct->FSMC_MemoryDataWidth |
+ FSMC_NANDInitStruct->FSMC_ECC |
+ FSMC_NANDInitStruct->FSMC_ECCPageSize |
+ (FSMC_NANDInitStruct->FSMC_TCLRSetupTime << 9 )|
+ (FSMC_NANDInitStruct->FSMC_TARSetupTime << 13);
+
+ /* Set tmppmem value according to FSMC_CommonSpaceTimingStructure parameters */
+ tmppmem = (uint32_t)FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime |
+ (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+ (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+ (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24);
+
+ /* Set tmppatt value according to FSMC_AttributeSpaceTimingStructure parameters */
+ tmppatt = (uint32_t)FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime |
+ (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+ (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+ (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24);
+
+ if(FSMC_NANDInitStruct->FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ /* FSMC_Bank2_NAND registers configuration */
+ FSMC_Bank2->PCR2 = tmppcr;
+ FSMC_Bank2->PMEM2 = tmppmem;
+ FSMC_Bank2->PATT2 = tmppatt;
+ }
+ else
+ {
+ /* FSMC_Bank3_NAND registers configuration */
+ FSMC_Bank3->PCR3 = tmppcr;
+ FSMC_Bank3->PMEM3 = tmppmem;
+ FSMC_Bank3->PATT3 = tmppatt;
+ }
+}
+
+/**
+ * @brief Initializes the FSMC PCCARD Bank according to the specified
+ * parameters in the FSMC_PCCARDInitStruct.
+ * @param FSMC_PCCARDInitStruct : pointer to a FSMC_PCCARDInitTypeDef
+ * structure that contains the configuration information for the FSMC
+ * PCCARD Bank.
+ * @retval None
+ */
+void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_WAIT_FEATURE(FSMC_PCCARDInitStruct->FSMC_Waitfeature));
+ assert_param(IS_FSMC_TCLR_TIME(FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime));
+ assert_param(IS_FSMC_TAR_TIME(FSMC_PCCARDInitStruct->FSMC_TARSetupTime));
+
+ assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime));
+
+ assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime));
+ assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime));
+
+ /* Set the PCR4 register value according to FSMC_PCCARDInitStruct parameters */
+ FSMC_Bank4->PCR4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_Waitfeature |
+ FSMC_MemoryDataWidth_16b |
+ (FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime << 9) |
+ (FSMC_PCCARDInitStruct->FSMC_TARSetupTime << 13);
+
+ /* Set PMEM4 register value according to FSMC_CommonSpaceTimingStructure parameters */
+ FSMC_Bank4->PMEM4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime |
+ (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+ (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+ (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24);
+
+ /* Set PATT4 register value according to FSMC_AttributeSpaceTimingStructure parameters */
+ FSMC_Bank4->PATT4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime |
+ (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+ (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+ (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24);
+
+ /* Set PIO4 register value according to FSMC_IOSpaceTimingStructure parameters */
+ FSMC_Bank4->PIO4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime |
+ (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+ (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+ (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime << 24);
+}
+
+/**
+ * @brief Fills each FSMC_NORSRAMInitStruct member with its default value.
+ * @param FSMC_NORSRAMInitStruct: pointer to a FSMC_NORSRAMInitTypeDef
+ * structure which will be initialized.
+ * @retval None
+ */
+void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct)
+{
+ /* Reset NOR/SRAM Init structure parameters values */
+ FSMC_NORSRAMInitStruct->FSMC_Bank = FSMC_Bank1_NORSRAM1;
+ FSMC_NORSRAMInitStruct->FSMC_DataAddressMux = FSMC_DataAddressMux_Enable;
+ FSMC_NORSRAMInitStruct->FSMC_MemoryType = FSMC_MemoryType_SRAM;
+ FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b;
+ FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
+ FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
+ FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
+ FSMC_NORSRAMInitStruct->FSMC_WrapMode = FSMC_WrapMode_Disable;
+ FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
+ FSMC_NORSRAMInitStruct->FSMC_WriteOperation = FSMC_WriteOperation_Enable;
+ FSMC_NORSRAMInitStruct->FSMC_WaitSignal = FSMC_WaitSignal_Enable;
+ FSMC_NORSRAMInitStruct->FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
+ FSMC_NORSRAMInitStruct->FSMC_WriteBurst = FSMC_WriteBurst_Disable;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime = 0xFF;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime = 0xFF;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A;
+}
+
+/**
+ * @brief Fills each FSMC_NANDInitStruct member with its default value.
+ * @param FSMC_NANDInitStruct: pointer to a FSMC_NANDInitTypeDef
+ * structure which will be initialized.
+ * @retval None
+ */
+void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct)
+{
+ /* Reset NAND Init structure parameters values */
+ FSMC_NANDInitStruct->FSMC_Bank = FSMC_Bank2_NAND;
+ FSMC_NANDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable;
+ FSMC_NANDInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b;
+ FSMC_NANDInitStruct->FSMC_ECC = FSMC_ECC_Disable;
+ FSMC_NANDInitStruct->FSMC_ECCPageSize = FSMC_ECCPageSize_256Bytes;
+ FSMC_NANDInitStruct->FSMC_TCLRSetupTime = 0x0;
+ FSMC_NANDInitStruct->FSMC_TARSetupTime = 0x0;
+ FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
+}
+
+/**
+ * @brief Fills each FSMC_PCCARDInitStruct member with its default value.
+ * @param FSMC_PCCARDInitStruct: pointer to a FSMC_PCCARDInitTypeDef
+ * structure which will be initialized.
+ * @retval None
+ */
+void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct)
+{
+ /* Reset PCCARD Init structure parameters values */
+ FSMC_PCCARDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable;
+ FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime = 0x0;
+ FSMC_PCCARDInitStruct->FSMC_TARSetupTime = 0x0;
+ FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
+}
+
+/**
+ * @brief Enables or disables the specified NOR/SRAM Memory Bank.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1
+ * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2
+ * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3
+ * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4
+ * @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState)
+{
+ assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected NOR/SRAM Bank by setting the PBKEN bit in the BCRx register */
+ FSMC_Bank1->BTCR[FSMC_Bank] |= BCR_MBKEN_Set;
+ }
+ else
+ {
+ /* Disable the selected NOR/SRAM Bank by clearing the PBKEN bit in the BCRx register */
+ FSMC_Bank1->BTCR[FSMC_Bank] &= BCR_MBKEN_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified NAND Memory Bank.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState)
+{
+ assert_param(IS_FSMC_NAND_BANK(FSMC_Bank));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected NAND Bank by setting the PBKEN bit in the PCRx register */
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->PCR2 |= PCR_PBKEN_Set;
+ }
+ else
+ {
+ FSMC_Bank3->PCR3 |= PCR_PBKEN_Set;
+ }
+ }
+ else
+ {
+ /* Disable the selected NAND Bank by clearing the PBKEN bit in the PCRx register */
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->PCR2 &= PCR_PBKEN_Reset;
+ }
+ else
+ {
+ FSMC_Bank3->PCR3 &= PCR_PBKEN_Reset;
+ }
+ }
+}
+
+/**
+ * @brief Enables or disables the PCCARD Memory Bank.
+ * @param NewState: new state of the PCCARD Memory Bank.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void FSMC_PCCARDCmd(FunctionalState NewState)
+{
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the PCCARD Bank by setting the PBKEN bit in the PCR4 register */
+ FSMC_Bank4->PCR4 |= PCR_PBKEN_Set;
+ }
+ else
+ {
+ /* Disable the PCCARD Bank by clearing the PBKEN bit in the PCR4 register */
+ FSMC_Bank4->PCR4 &= PCR_PBKEN_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the FSMC NAND ECC feature.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @param NewState: new state of the FSMC NAND ECC feature.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState)
+{
+ assert_param(IS_FSMC_NAND_BANK(FSMC_Bank));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected NAND Bank ECC function by setting the ECCEN bit in the PCRx register */
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->PCR2 |= PCR_ECCEN_Set;
+ }
+ else
+ {
+ FSMC_Bank3->PCR3 |= PCR_ECCEN_Set;
+ }
+ }
+ else
+ {
+ /* Disable the selected NAND Bank ECC function by clearing the ECCEN bit in the PCRx register */
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->PCR2 &= PCR_ECCEN_Reset;
+ }
+ else
+ {
+ FSMC_Bank3->PCR3 &= PCR_ECCEN_Reset;
+ }
+ }
+}
+
+/**
+ * @brief Returns the error correction code register value.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @retval The Error Correction Code (ECC) value.
+ */
+uint32_t FSMC_GetECC(uint32_t FSMC_Bank)
+{
+ uint32_t eccval = 0x00000000;
+
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ /* Get the ECCR2 register value */
+ eccval = FSMC_Bank2->ECCR2;
+ }
+ else
+ {
+ /* Get the ECCR3 register value */
+ eccval = FSMC_Bank3->ECCR3;
+ }
+ /* Return the error correction code value */
+ return(eccval);
+}
+
+/**
+ * @brief Enables or disables the specified FSMC interrupts.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+ * @param FSMC_IT: specifies the FSMC interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt.
+ * @arg FSMC_IT_Level: Level edge detection interrupt.
+ * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt.
+ * @param NewState: new state of the specified FSMC interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState)
+{
+ assert_param(IS_FSMC_IT_BANK(FSMC_Bank));
+ assert_param(IS_FSMC_IT(FSMC_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected FSMC_Bank2 interrupts */
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->SR2 |= FSMC_IT;
+ }
+ /* Enable the selected FSMC_Bank3 interrupts */
+ else if (FSMC_Bank == FSMC_Bank3_NAND)
+ {
+ FSMC_Bank3->SR3 |= FSMC_IT;
+ }
+ /* Enable the selected FSMC_Bank4 interrupts */
+ else
+ {
+ FSMC_Bank4->SR4 |= FSMC_IT;
+ }
+ }
+ else
+ {
+ /* Disable the selected FSMC_Bank2 interrupts */
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+
+ FSMC_Bank2->SR2 &= (uint32_t)~FSMC_IT;
+ }
+ /* Disable the selected FSMC_Bank3 interrupts */
+ else if (FSMC_Bank == FSMC_Bank3_NAND)
+ {
+ FSMC_Bank3->SR3 &= (uint32_t)~FSMC_IT;
+ }
+ /* Disable the selected FSMC_Bank4 interrupts */
+ else
+ {
+ FSMC_Bank4->SR4 &= (uint32_t)~FSMC_IT;
+ }
+ }
+}
+
+/**
+ * @brief Checks whether the specified FSMC flag is set or not.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+ * @param FSMC_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag.
+ * @arg FSMC_FLAG_Level: Level detection Flag.
+ * @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag.
+ * @arg FSMC_FLAG_FEMPT: Fifo empty Flag.
+ * @retval The new state of FSMC_FLAG (SET or RESET).
+ */
+FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ uint32_t tmpsr = 0x00000000;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank));
+ assert_param(IS_FSMC_GET_FLAG(FSMC_FLAG));
+
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ tmpsr = FSMC_Bank2->SR2;
+ }
+ else if(FSMC_Bank == FSMC_Bank3_NAND)
+ {
+ tmpsr = FSMC_Bank3->SR3;
+ }
+ /* FSMC_Bank4_PCCARD*/
+ else
+ {
+ tmpsr = FSMC_Bank4->SR4;
+ }
+
+ /* Get the flag status */
+ if ((tmpsr & FSMC_FLAG) != (uint16_t)RESET )
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ /* Return the flag status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the FSMC's pending flags.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+ * @param FSMC_FLAG: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag.
+ * @arg FSMC_FLAG_Level: Level detection Flag.
+ * @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag.
+ * @retval None
+ */
+void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank));
+ assert_param(IS_FSMC_CLEAR_FLAG(FSMC_FLAG)) ;
+
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->SR2 &= ~FSMC_FLAG;
+ }
+ else if(FSMC_Bank == FSMC_Bank3_NAND)
+ {
+ FSMC_Bank3->SR3 &= ~FSMC_FLAG;
+ }
+ /* FSMC_Bank4_PCCARD*/
+ else
+ {
+ FSMC_Bank4->SR4 &= ~FSMC_FLAG;
+ }
+}
+
+/**
+ * @brief Checks whether the specified FSMC interrupt has occurred or not.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+ * @param FSMC_IT: specifies the FSMC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt.
+ * @arg FSMC_IT_Level: Level edge detection interrupt.
+ * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt.
+ * @retval The new state of FSMC_IT (SET or RESET).
+ */
+ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t tmpsr = 0x0, itstatus = 0x0, itenable = 0x0;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_IT_BANK(FSMC_Bank));
+ assert_param(IS_FSMC_GET_IT(FSMC_IT));
+
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ tmpsr = FSMC_Bank2->SR2;
+ }
+ else if(FSMC_Bank == FSMC_Bank3_NAND)
+ {
+ tmpsr = FSMC_Bank3->SR3;
+ }
+ /* FSMC_Bank4_PCCARD*/
+ else
+ {
+ tmpsr = FSMC_Bank4->SR4;
+ }
+
+ itstatus = tmpsr & FSMC_IT;
+
+ itenable = tmpsr & (FSMC_IT >> 3);
+ if ((itstatus != (uint32_t)RESET) && (itenable != (uint32_t)RESET))
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the FSMC's interrupt pending bits.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+ * @param FSMC_IT: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt.
+ * @arg FSMC_IT_Level: Level edge detection interrupt.
+ * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt.
+ * @retval None
+ */
+void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_IT_BANK(FSMC_Bank));
+ assert_param(IS_FSMC_IT(FSMC_IT));
+
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->SR2 &= ~(FSMC_IT >> 3);
+ }
+ else if(FSMC_Bank == FSMC_Bank3_NAND)
+ {
+ FSMC_Bank3->SR3 &= ~(FSMC_IT >> 3);
+ }
+ /* FSMC_Bank4_PCCARD*/
+ else
+ {
+ FSMC_Bank4->SR4 &= ~(FSMC_IT >> 3);
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_gpio.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_gpio.c
new file mode 100644
index 00000000..93dbcd7c
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_gpio.c
@@ -0,0 +1,650 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_gpio.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the GPIO firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_gpio.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup GPIO
+ * @brief GPIO driver modules
+ * @{
+ */
+
+/** @defgroup GPIO_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Private_Defines
+ * @{
+ */
+
+/* ------------ RCC registers bit address in the alias region ----------------*/
+#define AFIO_OFFSET (AFIO_BASE - PERIPH_BASE)
+
+/* --- EVENTCR Register -----*/
+
+/* Alias word address of EVOE bit */
+#define EVCR_OFFSET (AFIO_OFFSET + 0x00)
+#define EVOE_BitNumber ((uint8_t)0x07)
+#define EVCR_EVOE_BB (PERIPH_BB_BASE + (EVCR_OFFSET * 32) + (EVOE_BitNumber * 4))
+
+
+/* --- MAPR Register ---*/
+/* Alias word address of MII_RMII_SEL bit */
+#define MAPR_OFFSET (AFIO_OFFSET + 0x04)
+#define MII_RMII_SEL_BitNumber ((u8)0x17)
+#define MAPR_MII_RMII_SEL_BB (PERIPH_BB_BASE + (MAPR_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4))
+
+
+#define EVCR_PORTPINCONFIG_MASK ((uint16_t)0xFF80)
+#define LSB_MASK ((uint16_t)0xFFFF)
+#define DBGAFR_POSITION_MASK ((uint32_t)0x000F0000)
+#define DBGAFR_SWJCFG_MASK ((uint32_t)0xF0FFFFFF)
+#define DBGAFR_LOCATION_MASK ((uint32_t)0x00200000)
+#define DBGAFR_NUMBITS_MASK ((uint32_t)0x00100000)
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the GPIOx peripheral registers to their default reset values.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @retval None
+ */
+void GPIO_DeInit(GPIO_TypeDef* GPIOx)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+
+ if (GPIOx == GPIOA)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, DISABLE);
+ }
+ else if (GPIOx == GPIOB)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, DISABLE);
+ }
+ else if (GPIOx == GPIOC)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, DISABLE);
+ }
+ else if (GPIOx == GPIOD)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, DISABLE);
+ }
+ else if (GPIOx == GPIOE)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, DISABLE);
+ }
+ else if (GPIOx == GPIOF)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, DISABLE);
+ }
+ else
+ {
+ if (GPIOx == GPIOG)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, DISABLE);
+ }
+ }
+}
+
+/**
+ * @brief Deinitializes the Alternate Functions (remap, event control
+ * and EXTI configuration) registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void GPIO_AFIODeInit(void)
+{
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, DISABLE);
+}
+
+/**
+ * @brief Initializes the GPIOx peripheral according to the specified
+ * parameters in the GPIO_InitStruct.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that
+ * contains the configuration information for the specified GPIO peripheral.
+ * @retval None
+ */
+void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct)
+{
+ uint32_t currentmode = 0x00, currentpin = 0x00, pinpos = 0x00, pos = 0x00;
+ uint32_t tmpreg = 0x00, pinmask = 0x00;
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode));
+ assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin));
+
+/*---------------------------- GPIO Mode Configuration -----------------------*/
+ currentmode = ((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x0F);
+ if ((((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x10)) != 0x00)
+ {
+ /* Check the parameters */
+ assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed));
+ /* Output mode */
+ currentmode |= (uint32_t)GPIO_InitStruct->GPIO_Speed;
+ }
+/*---------------------------- GPIO CRL Configuration ------------------------*/
+ /* Configure the eight low port pins */
+ if (((uint32_t)GPIO_InitStruct->GPIO_Pin & ((uint32_t)0x00FF)) != 0x00)
+ {
+ tmpreg = GPIOx->CRL;
+ for (pinpos = 0x00; pinpos < 0x08; pinpos++)
+ {
+ pos = ((uint32_t)0x01) << pinpos;
+ /* Get the port pins position */
+ currentpin = (GPIO_InitStruct->GPIO_Pin) & pos;
+ if (currentpin == pos)
+ {
+ pos = pinpos << 2;
+ /* Clear the corresponding low control register bits */
+ pinmask = ((uint32_t)0x0F) << pos;
+ tmpreg &= ~pinmask;
+ /* Write the mode configuration in the corresponding bits */
+ tmpreg |= (currentmode << pos);
+ /* Reset the corresponding ODR bit */
+ if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD)
+ {
+ GPIOx->BRR = (((uint32_t)0x01) << pinpos);
+ }
+ else
+ {
+ /* Set the corresponding ODR bit */
+ if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU)
+ {
+ GPIOx->BSRR = (((uint32_t)0x01) << pinpos);
+ }
+ }
+ }
+ }
+ GPIOx->CRL = tmpreg;
+ }
+/*---------------------------- GPIO CRH Configuration ------------------------*/
+ /* Configure the eight high port pins */
+ if (GPIO_InitStruct->GPIO_Pin > 0x00FF)
+ {
+ tmpreg = GPIOx->CRH;
+ for (pinpos = 0x00; pinpos < 0x08; pinpos++)
+ {
+ pos = (((uint32_t)0x01) << (pinpos + 0x08));
+ /* Get the port pins position */
+ currentpin = ((GPIO_InitStruct->GPIO_Pin) & pos);
+ if (currentpin == pos)
+ {
+ pos = pinpos << 2;
+ /* Clear the corresponding high control register bits */
+ pinmask = ((uint32_t)0x0F) << pos;
+ tmpreg &= ~pinmask;
+ /* Write the mode configuration in the corresponding bits */
+ tmpreg |= (currentmode << pos);
+ /* Reset the corresponding ODR bit */
+ if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD)
+ {
+ GPIOx->BRR = (((uint32_t)0x01) << (pinpos + 0x08));
+ }
+ /* Set the corresponding ODR bit */
+ if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU)
+ {
+ GPIOx->BSRR = (((uint32_t)0x01) << (pinpos + 0x08));
+ }
+ }
+ }
+ GPIOx->CRH = tmpreg;
+ }
+}
+
+/**
+ * @brief Fills each GPIO_InitStruct member with its default value.
+ * @param GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct)
+{
+ /* Reset GPIO init structure parameters values */
+ GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All;
+ GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz;
+ GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN_FLOATING;
+}
+
+/**
+ * @brief Reads the specified input port pin.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bit to read.
+ * This parameter can be GPIO_Pin_x where x can be (0..15).
+ * @retval The input port pin value.
+ */
+uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ uint8_t bitstatus = 0x00;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
+
+ if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET)
+ {
+ bitstatus = (uint8_t)Bit_SET;
+ }
+ else
+ {
+ bitstatus = (uint8_t)Bit_RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Reads the specified GPIO input data port.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @retval GPIO input data port value.
+ */
+uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+
+ return ((uint16_t)GPIOx->IDR);
+}
+
+/**
+ * @brief Reads the specified output data port bit.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bit to read.
+ * This parameter can be GPIO_Pin_x where x can be (0..15).
+ * @retval The output port pin value.
+ */
+uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ uint8_t bitstatus = 0x00;
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
+
+ if ((GPIOx->ODR & GPIO_Pin) != (uint32_t)Bit_RESET)
+ {
+ bitstatus = (uint8_t)Bit_SET;
+ }
+ else
+ {
+ bitstatus = (uint8_t)Bit_RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Reads the specified GPIO output data port.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @retval GPIO output data port value.
+ */
+uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+
+ return ((uint16_t)GPIOx->ODR);
+}
+
+/**
+ * @brief Sets the selected data port bits.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bits to be written.
+ * This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+ * @retval None
+ */
+void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ GPIOx->BSRR = GPIO_Pin;
+}
+
+/**
+ * @brief Clears the selected data port bits.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bits to be written.
+ * This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+ * @retval None
+ */
+void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ GPIOx->BRR = GPIO_Pin;
+}
+
+/**
+ * @brief Sets or clears the selected data port bit.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bit to be written.
+ * This parameter can be one of GPIO_Pin_x where x can be (0..15).
+ * @param BitVal: specifies the value to be written to the selected bit.
+ * This parameter can be one of the BitAction enum values:
+ * @arg Bit_RESET: to clear the port pin
+ * @arg Bit_SET: to set the port pin
+ * @retval None
+ */
+void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
+ assert_param(IS_GPIO_BIT_ACTION(BitVal));
+
+ if (BitVal != Bit_RESET)
+ {
+ GPIOx->BSRR = GPIO_Pin;
+ }
+ else
+ {
+ GPIOx->BRR = GPIO_Pin;
+ }
+}
+
+/**
+ * @brief Writes data to the specified GPIO data port.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param PortVal: specifies the value to be written to the port output data register.
+ * @retval None
+ */
+void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+
+ GPIOx->ODR = PortVal;
+}
+
+/**
+ * @brief Locks GPIO Pins configuration registers.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bit to be written.
+ * This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+ * @retval None
+ */
+void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ uint32_t tmp = 0x00010000;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ tmp |= GPIO_Pin;
+ /* Set LCKK bit */
+ GPIOx->LCKR = tmp;
+ /* Reset LCKK bit */
+ GPIOx->LCKR = GPIO_Pin;
+ /* Set LCKK bit */
+ GPIOx->LCKR = tmp;
+ /* Read LCKK bit*/
+ tmp = GPIOx->LCKR;
+ /* Read LCKK bit*/
+ tmp = GPIOx->LCKR;
+}
+
+/**
+ * @brief Selects the GPIO pin used as Event output.
+ * @param GPIO_PortSource: selects the GPIO port to be used as source
+ * for Event output.
+ * This parameter can be GPIO_PortSourceGPIOx where x can be (A..E).
+ * @param GPIO_PinSource: specifies the pin for the Event output.
+ * This parameter can be GPIO_PinSourcex where x can be (0..15).
+ * @retval None
+ */
+void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource)
+{
+ uint32_t tmpreg = 0x00;
+ /* Check the parameters */
+ assert_param(IS_GPIO_EVENTOUT_PORT_SOURCE(GPIO_PortSource));
+ assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource));
+
+ tmpreg = AFIO->EVCR;
+ /* Clear the PORT[6:4] and PIN[3:0] bits */
+ tmpreg &= EVCR_PORTPINCONFIG_MASK;
+ tmpreg |= (uint32_t)GPIO_PortSource << 0x04;
+ tmpreg |= GPIO_PinSource;
+ AFIO->EVCR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the Event Output.
+ * @param NewState: new state of the Event output.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void GPIO_EventOutputCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) EVCR_EVOE_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Changes the mapping of the specified pin.
+ * @param GPIO_Remap: selects the pin to remap.
+ * This parameter can be one of the following values:
+ * @arg GPIO_Remap_SPI1 : SPI1 Alternate Function mapping
+ * @arg GPIO_Remap_I2C1 : I2C1 Alternate Function mapping
+ * @arg GPIO_Remap_USART1 : USART1 Alternate Function mapping
+ * @arg GPIO_Remap_USART2 : USART2 Alternate Function mapping
+ * @arg GPIO_PartialRemap_USART3 : USART3 Partial Alternate Function mapping
+ * @arg GPIO_FullRemap_USART3 : USART3 Full Alternate Function mapping
+ * @arg GPIO_PartialRemap_TIM1 : TIM1 Partial Alternate Function mapping
+ * @arg GPIO_FullRemap_TIM1 : TIM1 Full Alternate Function mapping
+ * @arg GPIO_PartialRemap1_TIM2 : TIM2 Partial1 Alternate Function mapping
+ * @arg GPIO_PartialRemap2_TIM2 : TIM2 Partial2 Alternate Function mapping
+ * @arg GPIO_FullRemap_TIM2 : TIM2 Full Alternate Function mapping
+ * @arg GPIO_PartialRemap_TIM3 : TIM3 Partial Alternate Function mapping
+ * @arg GPIO_FullRemap_TIM3 : TIM3 Full Alternate Function mapping
+ * @arg GPIO_Remap_TIM4 : TIM4 Alternate Function mapping
+ * @arg GPIO_Remap1_CAN1 : CAN1 Alternate Function mapping
+ * @arg GPIO_Remap2_CAN1 : CAN1 Alternate Function mapping
+ * @arg GPIO_Remap_PD01 : PD01 Alternate Function mapping
+ * @arg GPIO_Remap_TIM5CH4_LSI : LSI connected to TIM5 Channel4 input capture for calibration
+ * @arg GPIO_Remap_ADC1_ETRGINJ : ADC1 External Trigger Injected Conversion remapping
+ * @arg GPIO_Remap_ADC1_ETRGREG : ADC1 External Trigger Regular Conversion remapping
+ * @arg GPIO_Remap_ADC2_ETRGINJ : ADC2 External Trigger Injected Conversion remapping
+ * @arg GPIO_Remap_ADC2_ETRGREG : ADC2 External Trigger Regular Conversion remapping
+ * @arg GPIO_Remap_ETH : Ethernet remapping (only for Connectivity line devices)
+ * @arg GPIO_Remap_CAN2 : CAN2 remapping (only for Connectivity line devices)
+ * @arg GPIO_Remap_SWJ_NoJTRST : Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST
+ * @arg GPIO_Remap_SWJ_JTAGDisable : JTAG-DP Disabled and SW-DP Enabled
+ * @arg GPIO_Remap_SWJ_Disable : Full SWJ Disabled (JTAG-DP + SW-DP)
+ * @arg GPIO_Remap_SPI3 : SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices)
+ * When the SPI3/I2S3 is remapped using this function, the SWJ is configured
+ * to Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST.
+ * @arg GPIO_Remap_TIM2ITR1_PTP_SOF : Ethernet PTP output or USB OTG SOF (Start of Frame) connected
+ * to TIM2 Internal Trigger 1 for calibration (only for Connectivity line devices)
+ * If the GPIO_Remap_TIM2ITR1_PTP_SOF is enabled the TIM2 ITR1 is connected to
+ * Ethernet PTP output. When Reset TIM2 ITR1 is connected to USB OTG SOF output.
+ * @arg GPIO_Remap_PTP_PPS : Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices)
+ * @arg GPIO_Remap_TIM15 : TIM15 Alternate Function mapping (only for Value line devices)
+ * @arg GPIO_Remap_TIM16 : TIM16 Alternate Function mapping (only for Value line devices)
+ * @arg GPIO_Remap_TIM17 : TIM17 Alternate Function mapping (only for Value line devices)
+ * @arg GPIO_Remap_CEC : CEC Alternate Function mapping (only for Value line devices)
+ * @arg GPIO_Remap_TIM1_DMA : TIM1 DMA requests mapping (only for Value line devices)
+ * @arg GPIO_Remap_TIM9 : TIM9 Alternate Function mapping (only for XL-density devices)
+ * @arg GPIO_Remap_TIM10 : TIM10 Alternate Function mapping (only for XL-density devices)
+ * @arg GPIO_Remap_TIM11 : TIM11 Alternate Function mapping (only for XL-density devices)
+ * @arg GPIO_Remap_TIM13 : TIM13 Alternate Function mapping (only for High density Value line and XL-density devices)
+ * @arg GPIO_Remap_TIM14 : TIM14 Alternate Function mapping (only for High density Value line and XL-density devices)
+ * @arg GPIO_Remap_FSMC_NADV : FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices)
+ * @arg GPIO_Remap_TIM67_DAC_DMA : TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices)
+ * @arg GPIO_Remap_TIM12 : TIM12 Alternate Function mapping (only for High density Value line devices)
+ * @arg GPIO_Remap_MISC : Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping,
+ * only for High density Value line devices)
+ * @param NewState: new state of the port pin remapping.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState)
+{
+ uint32_t tmp = 0x00, tmp1 = 0x00, tmpreg = 0x00, tmpmask = 0x00;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_REMAP(GPIO_Remap));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if((GPIO_Remap & 0x80000000) == 0x80000000)
+ {
+ tmpreg = AFIO->MAPR2;
+ }
+ else
+ {
+ tmpreg = AFIO->MAPR;
+ }
+
+ tmpmask = (GPIO_Remap & DBGAFR_POSITION_MASK) >> 0x10;
+ tmp = GPIO_Remap & LSB_MASK;
+
+ if ((GPIO_Remap & (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) == (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK))
+ {
+ tmpreg &= DBGAFR_SWJCFG_MASK;
+ AFIO->MAPR &= DBGAFR_SWJCFG_MASK;
+ }
+ else if ((GPIO_Remap & DBGAFR_NUMBITS_MASK) == DBGAFR_NUMBITS_MASK)
+ {
+ tmp1 = ((uint32_t)0x03) << tmpmask;
+ tmpreg &= ~tmp1;
+ tmpreg |= ~DBGAFR_SWJCFG_MASK;
+ }
+ else
+ {
+ tmpreg &= ~(tmp << ((GPIO_Remap >> 0x15)*0x10));
+ tmpreg |= ~DBGAFR_SWJCFG_MASK;
+ }
+
+ if (NewState != DISABLE)
+ {
+ tmpreg |= (tmp << ((GPIO_Remap >> 0x15)*0x10));
+ }
+
+ if((GPIO_Remap & 0x80000000) == 0x80000000)
+ {
+ AFIO->MAPR2 = tmpreg;
+ }
+ else
+ {
+ AFIO->MAPR = tmpreg;
+ }
+}
+
+/**
+ * @brief Selects the GPIO pin used as EXTI Line.
+ * @param GPIO_PortSource: selects the GPIO port to be used as source for EXTI lines.
+ * This parameter can be GPIO_PortSourceGPIOx where x can be (A..G).
+ * @param GPIO_PinSource: specifies the EXTI line to be configured.
+ * This parameter can be GPIO_PinSourcex where x can be (0..15).
+ * @retval None
+ */
+void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource)
+{
+ uint32_t tmp = 0x00;
+ /* Check the parameters */
+ assert_param(IS_GPIO_EXTI_PORT_SOURCE(GPIO_PortSource));
+ assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource));
+
+ tmp = ((uint32_t)0x0F) << (0x04 * (GPIO_PinSource & (uint8_t)0x03));
+ AFIO->EXTICR[GPIO_PinSource >> 0x02] &= ~tmp;
+ AFIO->EXTICR[GPIO_PinSource >> 0x02] |= (((uint32_t)GPIO_PortSource) << (0x04 * (GPIO_PinSource & (uint8_t)0x03)));
+}
+
+/**
+ * @brief Selects the Ethernet media interface.
+ * @note This function applies only to STM32 Connectivity line devices.
+ * @param GPIO_ETH_MediaInterface: specifies the Media Interface mode.
+ * This parameter can be one of the following values:
+ * @arg GPIO_ETH_MediaInterface_MII: MII mode
+ * @arg GPIO_ETH_MediaInterface_RMII: RMII mode
+ * @retval None
+ */
+void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface)
+{
+ assert_param(IS_GPIO_ETH_MEDIA_INTERFACE(GPIO_ETH_MediaInterface));
+
+ /* Configure MII_RMII selection bit */
+ *(__IO uint32_t *) MAPR_MII_RMII_SEL_BB = GPIO_ETH_MediaInterface;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_i2c.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_i2c.c
new file mode 100644
index 00000000..88967268
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_i2c.c
@@ -0,0 +1,1331 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_i2c.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the I2C firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_i2c.h"
+#include "stm32f10x_rcc.h"
+
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup I2C
+ * @brief I2C driver modules
+ * @{
+ */
+
+/** @defgroup I2C_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Private_Defines
+ * @{
+ */
+
+/* I2C SPE mask */
+#define CR1_PE_Set ((uint16_t)0x0001)
+#define CR1_PE_Reset ((uint16_t)0xFFFE)
+
+/* I2C START mask */
+#define CR1_START_Set ((uint16_t)0x0100)
+#define CR1_START_Reset ((uint16_t)0xFEFF)
+
+/* I2C STOP mask */
+#define CR1_STOP_Set ((uint16_t)0x0200)
+#define CR1_STOP_Reset ((uint16_t)0xFDFF)
+
+/* I2C ACK mask */
+#define CR1_ACK_Set ((uint16_t)0x0400)
+#define CR1_ACK_Reset ((uint16_t)0xFBFF)
+
+/* I2C ENGC mask */
+#define CR1_ENGC_Set ((uint16_t)0x0040)
+#define CR1_ENGC_Reset ((uint16_t)0xFFBF)
+
+/* I2C SWRST mask */
+#define CR1_SWRST_Set ((uint16_t)0x8000)
+#define CR1_SWRST_Reset ((uint16_t)0x7FFF)
+
+/* I2C PEC mask */
+#define CR1_PEC_Set ((uint16_t)0x1000)
+#define CR1_PEC_Reset ((uint16_t)0xEFFF)
+
+/* I2C ENPEC mask */
+#define CR1_ENPEC_Set ((uint16_t)0x0020)
+#define CR1_ENPEC_Reset ((uint16_t)0xFFDF)
+
+/* I2C ENARP mask */
+#define CR1_ENARP_Set ((uint16_t)0x0010)
+#define CR1_ENARP_Reset ((uint16_t)0xFFEF)
+
+/* I2C NOSTRETCH mask */
+#define CR1_NOSTRETCH_Set ((uint16_t)0x0080)
+#define CR1_NOSTRETCH_Reset ((uint16_t)0xFF7F)
+
+/* I2C registers Masks */
+#define CR1_CLEAR_Mask ((uint16_t)0xFBF5)
+
+/* I2C DMAEN mask */
+#define CR2_DMAEN_Set ((uint16_t)0x0800)
+#define CR2_DMAEN_Reset ((uint16_t)0xF7FF)
+
+/* I2C LAST mask */
+#define CR2_LAST_Set ((uint16_t)0x1000)
+#define CR2_LAST_Reset ((uint16_t)0xEFFF)
+
+/* I2C FREQ mask */
+#define CR2_FREQ_Reset ((uint16_t)0xFFC0)
+
+/* I2C ADD0 mask */
+#define OAR1_ADD0_Set ((uint16_t)0x0001)
+#define OAR1_ADD0_Reset ((uint16_t)0xFFFE)
+
+/* I2C ENDUAL mask */
+#define OAR2_ENDUAL_Set ((uint16_t)0x0001)
+#define OAR2_ENDUAL_Reset ((uint16_t)0xFFFE)
+
+/* I2C ADD2 mask */
+#define OAR2_ADD2_Reset ((uint16_t)0xFF01)
+
+/* I2C F/S mask */
+#define CCR_FS_Set ((uint16_t)0x8000)
+
+/* I2C CCR mask */
+#define CCR_CCR_Set ((uint16_t)0x0FFF)
+
+/* I2C FLAG mask */
+#define FLAG_Mask ((uint32_t)0x00FFFFFF)
+
+/* I2C Interrupt Enable mask */
+#define ITEN_Mask ((uint32_t)0x07000000)
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the I2Cx peripheral registers to their default reset values.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @retval None
+ */
+void I2C_DeInit(I2C_TypeDef* I2Cx)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+
+ if (I2Cx == I2C1)
+ {
+ /* Enable I2C1 reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, ENABLE);
+ /* Release I2C1 from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, DISABLE);
+ }
+ else
+ {
+ /* Enable I2C2 reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, ENABLE);
+ /* Release I2C2 from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, DISABLE);
+ }
+}
+
+/**
+ * @brief Initializes the I2Cx peripheral according to the specified
+ * parameters in the I2C_InitStruct.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_InitStruct: pointer to a I2C_InitTypeDef structure that
+ * contains the configuration information for the specified I2C peripheral.
+ * @retval None
+ */
+void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct)
+{
+ uint16_t tmpreg = 0, freqrange = 0;
+ uint16_t result = 0x04;
+ uint32_t pclk1 = 8000000;
+ RCC_ClocksTypeDef rcc_clocks;
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_CLOCK_SPEED(I2C_InitStruct->I2C_ClockSpeed));
+ assert_param(IS_I2C_MODE(I2C_InitStruct->I2C_Mode));
+ assert_param(IS_I2C_DUTY_CYCLE(I2C_InitStruct->I2C_DutyCycle));
+ assert_param(IS_I2C_OWN_ADDRESS1(I2C_InitStruct->I2C_OwnAddress1));
+ assert_param(IS_I2C_ACK_STATE(I2C_InitStruct->I2C_Ack));
+ assert_param(IS_I2C_ACKNOWLEDGE_ADDRESS(I2C_InitStruct->I2C_AcknowledgedAddress));
+
+/*---------------------------- I2Cx CR2 Configuration ------------------------*/
+ /* Get the I2Cx CR2 value */
+ tmpreg = I2Cx->CR2;
+ /* Clear frequency FREQ[5:0] bits */
+ tmpreg &= CR2_FREQ_Reset;
+ /* Get pclk1 frequency value */
+ RCC_GetClocksFreq(&rcc_clocks);
+ pclk1 = rcc_clocks.PCLK1_Frequency;
+ /* Set frequency bits depending on pclk1 value */
+ freqrange = (uint16_t)(pclk1 / 1000000);
+ tmpreg |= freqrange;
+ /* Write to I2Cx CR2 */
+ I2Cx->CR2 = tmpreg;
+
+/*---------------------------- I2Cx CCR Configuration ------------------------*/
+ /* Disable the selected I2C peripheral to configure TRISE */
+ I2Cx->CR1 &= CR1_PE_Reset;
+ /* Reset tmpreg value */
+ /* Clear F/S, DUTY and CCR[11:0] bits */
+ tmpreg = 0;
+
+ /* Configure speed in standard mode */
+ if (I2C_InitStruct->I2C_ClockSpeed <= 100000)
+ {
+ /* Standard mode speed calculate */
+ result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed << 1));
+ /* Test if CCR value is under 0x4*/
+ if (result < 0x04)
+ {
+ /* Set minimum allowed value */
+ result = 0x04;
+ }
+ /* Set speed value for standard mode */
+ tmpreg |= result;
+ /* Set Maximum Rise Time for standard mode */
+ I2Cx->TRISE = freqrange + 1;
+ }
+ /* Configure speed in fast mode */
+ else /*(I2C_InitStruct->I2C_ClockSpeed <= 400000)*/
+ {
+ if (I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_2)
+ {
+ /* Fast mode speed calculate: Tlow/Thigh = 2 */
+ result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 3));
+ }
+ else /*I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_16_9*/
+ {
+ /* Fast mode speed calculate: Tlow/Thigh = 16/9 */
+ result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 25));
+ /* Set DUTY bit */
+ result |= I2C_DutyCycle_16_9;
+ }
+
+ /* Test if CCR value is under 0x1*/
+ if ((result & CCR_CCR_Set) == 0)
+ {
+ /* Set minimum allowed value */
+ result |= (uint16_t)0x0001;
+ }
+ /* Set speed value and set F/S bit for fast mode */
+ tmpreg |= (uint16_t)(result | CCR_FS_Set);
+ /* Set Maximum Rise Time for fast mode */
+ I2Cx->TRISE = (uint16_t)(((freqrange * (uint16_t)300) / (uint16_t)1000) + (uint16_t)1);
+ }
+
+ /* Write to I2Cx CCR */
+ I2Cx->CCR = tmpreg;
+ /* Enable the selected I2C peripheral */
+ I2Cx->CR1 |= CR1_PE_Set;
+
+/*---------------------------- I2Cx CR1 Configuration ------------------------*/
+ /* Get the I2Cx CR1 value */
+ tmpreg = I2Cx->CR1;
+ /* Clear ACK, SMBTYPE and SMBUS bits */
+ tmpreg &= CR1_CLEAR_Mask;
+ /* Configure I2Cx: mode and acknowledgement */
+ /* Set SMBTYPE and SMBUS bits according to I2C_Mode value */
+ /* Set ACK bit according to I2C_Ack value */
+ tmpreg |= (uint16_t)((uint32_t)I2C_InitStruct->I2C_Mode | I2C_InitStruct->I2C_Ack);
+ /* Write to I2Cx CR1 */
+ I2Cx->CR1 = tmpreg;
+
+/*---------------------------- I2Cx OAR1 Configuration -----------------------*/
+ /* Set I2Cx Own Address1 and acknowledged address */
+ I2Cx->OAR1 = (I2C_InitStruct->I2C_AcknowledgedAddress | I2C_InitStruct->I2C_OwnAddress1);
+}
+
+/**
+ * @brief Fills each I2C_InitStruct member with its default value.
+ * @param I2C_InitStruct: pointer to an I2C_InitTypeDef structure which will be initialized.
+ * @retval None
+ */
+void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct)
+{
+/*---------------- Reset I2C init structure parameters values ----------------*/
+ /* initialize the I2C_ClockSpeed member */
+ I2C_InitStruct->I2C_ClockSpeed = 5000;
+ /* Initialize the I2C_Mode member */
+ I2C_InitStruct->I2C_Mode = I2C_Mode_I2C;
+ /* Initialize the I2C_DutyCycle member */
+ I2C_InitStruct->I2C_DutyCycle = I2C_DutyCycle_2;
+ /* Initialize the I2C_OwnAddress1 member */
+ I2C_InitStruct->I2C_OwnAddress1 = 0;
+ /* Initialize the I2C_Ack member */
+ I2C_InitStruct->I2C_Ack = I2C_Ack_Disable;
+ /* Initialize the I2C_AcknowledgedAddress member */
+ I2C_InitStruct->I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit;
+}
+
+/**
+ * @brief Enables or disables the specified I2C peripheral.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2Cx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected I2C peripheral */
+ I2Cx->CR1 |= CR1_PE_Set;
+ }
+ else
+ {
+ /* Disable the selected I2C peripheral */
+ I2Cx->CR1 &= CR1_PE_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified I2C DMA requests.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C DMA transfer.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected I2C DMA requests */
+ I2Cx->CR2 |= CR2_DMAEN_Set;
+ }
+ else
+ {
+ /* Disable the selected I2C DMA requests */
+ I2Cx->CR2 &= CR2_DMAEN_Reset;
+ }
+}
+
+/**
+ * @brief Specifies if the next DMA transfer will be the last one.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C DMA last transfer.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Next DMA transfer is the last transfer */
+ I2Cx->CR2 |= CR2_LAST_Set;
+ }
+ else
+ {
+ /* Next DMA transfer is not the last transfer */
+ I2Cx->CR2 &= CR2_LAST_Reset;
+ }
+}
+
+/**
+ * @brief Generates I2Cx communication START condition.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C START condition generation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None.
+ */
+void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Generate a START condition */
+ I2Cx->CR1 |= CR1_START_Set;
+ }
+ else
+ {
+ /* Disable the START condition generation */
+ I2Cx->CR1 &= CR1_START_Reset;
+ }
+}
+
+/**
+ * @brief Generates I2Cx communication STOP condition.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C STOP condition generation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None.
+ */
+void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Generate a STOP condition */
+ I2Cx->CR1 |= CR1_STOP_Set;
+ }
+ else
+ {
+ /* Disable the STOP condition generation */
+ I2Cx->CR1 &= CR1_STOP_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified I2C acknowledge feature.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C Acknowledgement.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None.
+ */
+void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the acknowledgement */
+ I2Cx->CR1 |= CR1_ACK_Set;
+ }
+ else
+ {
+ /* Disable the acknowledgement */
+ I2Cx->CR1 &= CR1_ACK_Reset;
+ }
+}
+
+/**
+ * @brief Configures the specified I2C own address2.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param Address: specifies the 7bit I2C own address2.
+ * @retval None.
+ */
+void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address)
+{
+ uint16_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+
+ /* Get the old register value */
+ tmpreg = I2Cx->OAR2;
+
+ /* Reset I2Cx Own address2 bit [7:1] */
+ tmpreg &= OAR2_ADD2_Reset;
+
+ /* Set I2Cx Own address2 */
+ tmpreg |= (uint16_t)((uint16_t)Address & (uint16_t)0x00FE);
+
+ /* Store the new register value */
+ I2Cx->OAR2 = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the specified I2C dual addressing mode.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C dual addressing mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable dual addressing mode */
+ I2Cx->OAR2 |= OAR2_ENDUAL_Set;
+ }
+ else
+ {
+ /* Disable dual addressing mode */
+ I2Cx->OAR2 &= OAR2_ENDUAL_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified I2C general call feature.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C General call.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable generall call */
+ I2Cx->CR1 |= CR1_ENGC_Set;
+ }
+ else
+ {
+ /* Disable generall call */
+ I2Cx->CR1 &= CR1_ENGC_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified I2C interrupts.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_IT: specifies the I2C interrupts sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg I2C_IT_BUF: Buffer interrupt mask
+ * @arg I2C_IT_EVT: Event interrupt mask
+ * @arg I2C_IT_ERR: Error interrupt mask
+ * @param NewState: new state of the specified I2C interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ assert_param(IS_I2C_CONFIG_IT(I2C_IT));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected I2C interrupts */
+ I2Cx->CR2 |= I2C_IT;
+ }
+ else
+ {
+ /* Disable the selected I2C interrupts */
+ I2Cx->CR2 &= (uint16_t)~I2C_IT;
+ }
+}
+
+/**
+ * @brief Sends a data byte through the I2Cx peripheral.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param Data: Byte to be transmitted..
+ * @retval None
+ */
+void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ /* Write in the DR register the data to be sent */
+ I2Cx->DR = Data;
+}
+
+/**
+ * @brief Returns the most recent received data by the I2Cx peripheral.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @retval The value of the received data.
+ */
+uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ /* Return the data in the DR register */
+ return (uint8_t)I2Cx->DR;
+}
+
+/**
+ * @brief Transmits the address byte to select the slave device.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param Address: specifies the slave address which will be transmitted
+ * @param I2C_Direction: specifies whether the I2C device will be a
+ * Transmitter or a Receiver. This parameter can be one of the following values
+ * @arg I2C_Direction_Transmitter: Transmitter mode
+ * @arg I2C_Direction_Receiver: Receiver mode
+ * @retval None.
+ */
+void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_DIRECTION(I2C_Direction));
+ /* Test on the direction to set/reset the read/write bit */
+ if (I2C_Direction != I2C_Direction_Transmitter)
+ {
+ /* Set the address bit0 for read */
+ Address |= OAR1_ADD0_Set;
+ }
+ else
+ {
+ /* Reset the address bit0 for write */
+ Address &= OAR1_ADD0_Reset;
+ }
+ /* Send the address */
+ I2Cx->DR = Address;
+}
+
+/**
+ * @brief Reads the specified I2C register and returns its value.
+ * @param I2C_Register: specifies the register to read.
+ * This parameter can be one of the following values:
+ * @arg I2C_Register_CR1: CR1 register.
+ * @arg I2C_Register_CR2: CR2 register.
+ * @arg I2C_Register_OAR1: OAR1 register.
+ * @arg I2C_Register_OAR2: OAR2 register.
+ * @arg I2C_Register_DR: DR register.
+ * @arg I2C_Register_SR1: SR1 register.
+ * @arg I2C_Register_SR2: SR2 register.
+ * @arg I2C_Register_CCR: CCR register.
+ * @arg I2C_Register_TRISE: TRISE register.
+ * @retval The value of the read register.
+ */
+uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_REGISTER(I2C_Register));
+
+ tmp = (uint32_t) I2Cx;
+ tmp += I2C_Register;
+
+ /* Return the selected register value */
+ return (*(__IO uint16_t *) tmp);
+}
+
+/**
+ * @brief Enables or disables the specified I2C software reset.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C software reset.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Peripheral under reset */
+ I2Cx->CR1 |= CR1_SWRST_Set;
+ }
+ else
+ {
+ /* Peripheral not under reset */
+ I2Cx->CR1 &= CR1_SWRST_Reset;
+ }
+}
+
+/**
+ * @brief Selects the specified I2C NACK position in master receiver mode.
+ * This function is useful in I2C Master Receiver mode when the number
+ * of data to be received is equal to 2. In this case, this function
+ * should be called (with parameter I2C_NACKPosition_Next) before data
+ * reception starts,as described in the 2-byte reception procedure
+ * recommended in Reference Manual in Section: Master receiver.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_NACKPosition: specifies the NACK position.
+ * This parameter can be one of the following values:
+ * @arg I2C_NACKPosition_Next: indicates that the next byte will be the last
+ * received byte.
+ * @arg I2C_NACKPosition_Current: indicates that current byte is the last
+ * received byte.
+ *
+ * @note This function configures the same bit (POS) as I2C_PECPositionConfig()
+ * but is intended to be used in I2C mode while I2C_PECPositionConfig()
+ * is intended to used in SMBUS mode.
+ *
+ * @retval None
+ */
+void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_NACK_POSITION(I2C_NACKPosition));
+
+ /* Check the input parameter */
+ if (I2C_NACKPosition == I2C_NACKPosition_Next)
+ {
+ /* Next byte in shift register is the last received byte */
+ I2Cx->CR1 |= I2C_NACKPosition_Next;
+ }
+ else
+ {
+ /* Current byte in shift register is the last received byte */
+ I2Cx->CR1 &= I2C_NACKPosition_Current;
+ }
+}
+
+/**
+ * @brief Drives the SMBusAlert pin high or low for the specified I2C.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_SMBusAlert: specifies SMBAlert pin level.
+ * This parameter can be one of the following values:
+ * @arg I2C_SMBusAlert_Low: SMBAlert pin driven low
+ * @arg I2C_SMBusAlert_High: SMBAlert pin driven high
+ * @retval None
+ */
+void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_SMBUS_ALERT(I2C_SMBusAlert));
+ if (I2C_SMBusAlert == I2C_SMBusAlert_Low)
+ {
+ /* Drive the SMBusAlert pin Low */
+ I2Cx->CR1 |= I2C_SMBusAlert_Low;
+ }
+ else
+ {
+ /* Drive the SMBusAlert pin High */
+ I2Cx->CR1 &= I2C_SMBusAlert_High;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified I2C PEC transfer.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C PEC transmission.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected I2C PEC transmission */
+ I2Cx->CR1 |= CR1_PEC_Set;
+ }
+ else
+ {
+ /* Disable the selected I2C PEC transmission */
+ I2Cx->CR1 &= CR1_PEC_Reset;
+ }
+}
+
+/**
+ * @brief Selects the specified I2C PEC position.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_PECPosition: specifies the PEC position.
+ * This parameter can be one of the following values:
+ * @arg I2C_PECPosition_Next: indicates that the next byte is PEC
+ * @arg I2C_PECPosition_Current: indicates that current byte is PEC
+ *
+ * @note This function configures the same bit (POS) as I2C_NACKPositionConfig()
+ * but is intended to be used in SMBUS mode while I2C_NACKPositionConfig()
+ * is intended to used in I2C mode.
+ *
+ * @retval None
+ */
+void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_PEC_POSITION(I2C_PECPosition));
+ if (I2C_PECPosition == I2C_PECPosition_Next)
+ {
+ /* Next byte in shift register is PEC */
+ I2Cx->CR1 |= I2C_PECPosition_Next;
+ }
+ else
+ {
+ /* Current byte in shift register is PEC */
+ I2Cx->CR1 &= I2C_PECPosition_Current;
+ }
+}
+
+/**
+ * @brief Enables or disables the PEC value calculation of the transferred bytes.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2Cx PEC value calculation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected I2C PEC calculation */
+ I2Cx->CR1 |= CR1_ENPEC_Set;
+ }
+ else
+ {
+ /* Disable the selected I2C PEC calculation */
+ I2Cx->CR1 &= CR1_ENPEC_Reset;
+ }
+}
+
+/**
+ * @brief Returns the PEC value for the specified I2C.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @retval The PEC value.
+ */
+uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ /* Return the selected I2C PEC value */
+ return ((I2Cx->SR2) >> 8);
+}
+
+/**
+ * @brief Enables or disables the specified I2C ARP.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2Cx ARP.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected I2C ARP */
+ I2Cx->CR1 |= CR1_ENARP_Set;
+ }
+ else
+ {
+ /* Disable the selected I2C ARP */
+ I2Cx->CR1 &= CR1_ENARP_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified I2C Clock stretching.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2Cx Clock stretching.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState == DISABLE)
+ {
+ /* Enable the selected I2C Clock stretching */
+ I2Cx->CR1 |= CR1_NOSTRETCH_Set;
+ }
+ else
+ {
+ /* Disable the selected I2C Clock stretching */
+ I2Cx->CR1 &= CR1_NOSTRETCH_Reset;
+ }
+}
+
+/**
+ * @brief Selects the specified I2C fast mode duty cycle.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_DutyCycle: specifies the fast mode duty cycle.
+ * This parameter can be one of the following values:
+ * @arg I2C_DutyCycle_2: I2C fast mode Tlow/Thigh = 2
+ * @arg I2C_DutyCycle_16_9: I2C fast mode Tlow/Thigh = 16/9
+ * @retval None
+ */
+void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_DUTY_CYCLE(I2C_DutyCycle));
+ if (I2C_DutyCycle != I2C_DutyCycle_16_9)
+ {
+ /* I2C fast mode Tlow/Thigh=2 */
+ I2Cx->CCR &= I2C_DutyCycle_2;
+ }
+ else
+ {
+ /* I2C fast mode Tlow/Thigh=16/9 */
+ I2Cx->CCR |= I2C_DutyCycle_16_9;
+ }
+}
+
+
+
+/**
+ * @brief
+ ****************************************************************************************
+ *
+ * I2C State Monitoring Functions
+ *
+ ****************************************************************************************
+ * This I2C driver provides three different ways for I2C state monitoring
+ * depending on the application requirements and constraints:
+ *
+ *
+ * 1) Basic state monitoring:
+ * Using I2C_CheckEvent() function:
+ * It compares the status registers (SR1 and SR2) content to a given event
+ * (can be the combination of one or more flags).
+ * It returns SUCCESS if the current status includes the given flags
+ * and returns ERROR if one or more flags are missing in the current status.
+ * - When to use:
+ * - This function is suitable for most applications as well as for startup
+ * activity since the events are fully described in the product reference manual
+ * (RM0008).
+ * - It is also suitable for users who need to define their own events.
+ * - Limitations:
+ * - If an error occurs (ie. error flags are set besides to the monitored flags),
+ * the I2C_CheckEvent() function may return SUCCESS despite the communication
+ * hold or corrupted real state.
+ * In this case, it is advised to use error interrupts to monitor the error
+ * events and handle them in the interrupt IRQ handler.
+ *
+ * @note
+ * For error management, it is advised to use the following functions:
+ * - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR).
+ * - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs.
+ * Where x is the peripheral instance (I2C1, I2C2 ...)
+ * - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler()
+ * in order to determine which error occured.
+ * - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd()
+ * and/or I2C_GenerateStop() in order to clear the error flag and source,
+ * and return to correct communication status.
+ *
+ *
+ * 2) Advanced state monitoring:
+ * Using the function I2C_GetLastEvent() which returns the image of both status
+ * registers in a single word (uint32_t) (Status Register 2 value is shifted left
+ * by 16 bits and concatenated to Status Register 1).
+ * - When to use:
+ * - This function is suitable for the same applications above but it allows to
+ * overcome the mentioned limitation of I2C_GetFlagStatus() function.
+ * The returned value could be compared to events already defined in the
+ * library (stm32f10x_i2c.h) or to custom values defined by user.
+ * - This function is suitable when multiple flags are monitored at the same time.
+ * - At the opposite of I2C_CheckEvent() function, this function allows user to
+ * choose when an event is accepted (when all events flags are set and no
+ * other flags are set or just when the needed flags are set like
+ * I2C_CheckEvent() function).
+ * - Limitations:
+ * - User may need to define his own events.
+ * - Same remark concerning the error management is applicable for this
+ * function if user decides to check only regular communication flags (and
+ * ignores error flags).
+ *
+ *
+ * 3) Flag-based state monitoring:
+ * Using the function I2C_GetFlagStatus() which simply returns the status of
+ * one single flag (ie. I2C_FLAG_RXNE ...).
+ * - When to use:
+ * - This function could be used for specific applications or in debug phase.
+ * - It is suitable when only one flag checking is needed (most I2C events
+ * are monitored through multiple flags).
+ * - Limitations:
+ * - When calling this function, the Status register is accessed. Some flags are
+ * cleared when the status register is accessed. So checking the status
+ * of one Flag, may clear other ones.
+ * - Function may need to be called twice or more in order to monitor one
+ * single event.
+ *
+ * For detailed description of Events, please refer to section I2C_Events in
+ * stm32f10x_i2c.h file.
+ *
+ */
+
+/**
+ *
+ * 1) Basic state monitoring
+ *******************************************************************************
+ */
+
+/**
+ * @brief Checks whether the last I2Cx Event is equal to the one passed
+ * as parameter.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_EVENT: specifies the event to be checked.
+ * This parameter can be one of the following values:
+ * @arg I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED : EV1
+ * @arg I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED : EV1
+ * @arg I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED : EV1
+ * @arg I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED : EV1
+ * @arg I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED : EV1
+ * @arg I2C_EVENT_SLAVE_BYTE_RECEIVED : EV2
+ * @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF) : EV2
+ * @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL) : EV2
+ * @arg I2C_EVENT_SLAVE_BYTE_TRANSMITTED : EV3
+ * @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF) : EV3
+ * @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL) : EV3
+ * @arg I2C_EVENT_SLAVE_ACK_FAILURE : EV3_2
+ * @arg I2C_EVENT_SLAVE_STOP_DETECTED : EV4
+ * @arg I2C_EVENT_MASTER_MODE_SELECT : EV5
+ * @arg I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED : EV6
+ * @arg I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED : EV6
+ * @arg I2C_EVENT_MASTER_BYTE_RECEIVED : EV7
+ * @arg I2C_EVENT_MASTER_BYTE_TRANSMITTING : EV8
+ * @arg I2C_EVENT_MASTER_BYTE_TRANSMITTED : EV8_2
+ * @arg I2C_EVENT_MASTER_MODE_ADDRESS10 : EV9
+ *
+ * @note: For detailed description of Events, please refer to section
+ * I2C_Events in stm32f10x_i2c.h file.
+ *
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: Last event is equal to the I2C_EVENT
+ * - ERROR: Last event is different from the I2C_EVENT
+ */
+ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT)
+{
+ uint32_t lastevent = 0;
+ uint32_t flag1 = 0, flag2 = 0;
+ ErrorStatus status = ERROR;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_EVENT(I2C_EVENT));
+
+ /* Read the I2Cx status register */
+ flag1 = I2Cx->SR1;
+ flag2 = I2Cx->SR2;
+ flag2 = flag2 << 16;
+
+ /* Get the last event value from I2C status register */
+ lastevent = (flag1 | flag2) & FLAG_Mask;
+
+ /* Check whether the last event contains the I2C_EVENT */
+ if ((lastevent & I2C_EVENT) == I2C_EVENT)
+ {
+ /* SUCCESS: last event is equal to I2C_EVENT */
+ status = SUCCESS;
+ }
+ else
+ {
+ /* ERROR: last event is different from I2C_EVENT */
+ status = ERROR;
+ }
+ /* Return status */
+ return status;
+}
+
+/**
+ *
+ * 2) Advanced state monitoring
+ *******************************************************************************
+ */
+
+/**
+ * @brief Returns the last I2Cx Event.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ *
+ * @note: For detailed description of Events, please refer to section
+ * I2C_Events in stm32f10x_i2c.h file.
+ *
+ * @retval The last event
+ */
+uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx)
+{
+ uint32_t lastevent = 0;
+ uint32_t flag1 = 0, flag2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+
+ /* Read the I2Cx status register */
+ flag1 = I2Cx->SR1;
+ flag2 = I2Cx->SR2;
+ flag2 = flag2 << 16;
+
+ /* Get the last event value from I2C status register */
+ lastevent = (flag1 | flag2) & FLAG_Mask;
+
+ /* Return status */
+ return lastevent;
+}
+
+/**
+ *
+ * 3) Flag-based state monitoring
+ *******************************************************************************
+ */
+
+/**
+ * @brief Checks whether the specified I2C flag is set or not.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_FLAG_DUALF: Dual flag (Slave mode)
+ * @arg I2C_FLAG_SMBHOST: SMBus host header (Slave mode)
+ * @arg I2C_FLAG_SMBDEFAULT: SMBus default header (Slave mode)
+ * @arg I2C_FLAG_GENCALL: General call header flag (Slave mode)
+ * @arg I2C_FLAG_TRA: Transmitter/Receiver flag
+ * @arg I2C_FLAG_BUSY: Bus busy flag
+ * @arg I2C_FLAG_MSL: Master/Slave flag
+ * @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+ * @arg I2C_FLAG_PECERR: PEC error in reception flag
+ * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
+ * @arg I2C_FLAG_BERR: Bus error flag
+ * @arg I2C_FLAG_TXE: Data register empty flag (Transmitter)
+ * @arg I2C_FLAG_RXNE: Data register not empty (Receiver) flag
+ * @arg I2C_FLAG_STOPF: Stop detection flag (Slave mode)
+ * @arg I2C_FLAG_ADD10: 10-bit header sent flag (Master mode)
+ * @arg I2C_FLAG_BTF: Byte transfer finished flag
+ * @arg I2C_FLAG_ADDR: Address sent flag (Master mode) "ADSL"
+ * Address matched flag (Slave mode)"ENDA"
+ * @arg I2C_FLAG_SB: Start bit flag (Master mode)
+ * @retval The new state of I2C_FLAG (SET or RESET).
+ */
+FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ __IO uint32_t i2creg = 0, i2cxbase = 0;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_GET_FLAG(I2C_FLAG));
+
+ /* Get the I2Cx peripheral base address */
+ i2cxbase = (uint32_t)I2Cx;
+
+ /* Read flag register index */
+ i2creg = I2C_FLAG >> 28;
+
+ /* Get bit[23:0] of the flag */
+ I2C_FLAG &= FLAG_Mask;
+
+ if(i2creg != 0)
+ {
+ /* Get the I2Cx SR1 register address */
+ i2cxbase += 0x14;
+ }
+ else
+ {
+ /* Flag in I2Cx SR2 Register */
+ I2C_FLAG = (uint32_t)(I2C_FLAG >> 16);
+ /* Get the I2Cx SR2 register address */
+ i2cxbase += 0x18;
+ }
+
+ if(((*(__IO uint32_t *)i2cxbase) & I2C_FLAG) != (uint32_t)RESET)
+ {
+ /* I2C_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* I2C_FLAG is reset */
+ bitstatus = RESET;
+ }
+
+ /* Return the I2C_FLAG status */
+ return bitstatus;
+}
+
+
+
+/**
+ * @brief Clears the I2Cx's pending flags.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_FLAG: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+ * @arg I2C_FLAG_PECERR: PEC error in reception flag
+ * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
+ * @arg I2C_FLAG_BERR: Bus error flag
+ *
+ * @note
+ * - STOPF (STOP detection) is cleared by software sequence: a read operation
+ * to I2C_SR1 register (I2C_GetFlagStatus()) followed by a write operation
+ * to I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral).
+ * - ADD10 (10-bit header sent) is cleared by software sequence: a read
+ * operation to I2C_SR1 (I2C_GetFlagStatus()) followed by writing the
+ * second byte of the address in DR register.
+ * - BTF (Byte Transfer Finished) is cleared by software sequence: a read
+ * operation to I2C_SR1 register (I2C_GetFlagStatus()) followed by a
+ * read/write to I2C_DR register (I2C_SendData()).
+ * - ADDR (Address sent) is cleared by software sequence: a read operation to
+ * I2C_SR1 register (I2C_GetFlagStatus()) followed by a read operation to
+ * I2C_SR2 register ((void)(I2Cx->SR2)).
+ * - SB (Start Bit) is cleared software sequence: a read operation to I2C_SR1
+ * register (I2C_GetFlagStatus()) followed by a write operation to I2C_DR
+ * register (I2C_SendData()).
+ * @retval None
+ */
+void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG)
+{
+ uint32_t flagpos = 0;
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_CLEAR_FLAG(I2C_FLAG));
+ /* Get the I2C flag position */
+ flagpos = I2C_FLAG & FLAG_Mask;
+ /* Clear the selected I2C flag */
+ I2Cx->SR1 = (uint16_t)~flagpos;
+}
+
+/**
+ * @brief Checks whether the specified I2C interrupt has occurred or not.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_IT: specifies the interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_SMBALERT: SMBus Alert flag
+ * @arg I2C_IT_TIMEOUT: Timeout or Tlow error flag
+ * @arg I2C_IT_PECERR: PEC error in reception flag
+ * @arg I2C_IT_OVR: Overrun/Underrun flag (Slave mode)
+ * @arg I2C_IT_AF: Acknowledge failure flag
+ * @arg I2C_IT_ARLO: Arbitration lost flag (Master mode)
+ * @arg I2C_IT_BERR: Bus error flag
+ * @arg I2C_IT_TXE: Data register empty flag (Transmitter)
+ * @arg I2C_IT_RXNE: Data register not empty (Receiver) flag
+ * @arg I2C_IT_STOPF: Stop detection flag (Slave mode)
+ * @arg I2C_IT_ADD10: 10-bit header sent flag (Master mode)
+ * @arg I2C_IT_BTF: Byte transfer finished flag
+ * @arg I2C_IT_ADDR: Address sent flag (Master mode) "ADSL"
+ * Address matched flag (Slave mode)"ENDAD"
+ * @arg I2C_IT_SB: Start bit flag (Master mode)
+ * @retval The new state of I2C_IT (SET or RESET).
+ */
+ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t enablestatus = 0;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_GET_IT(I2C_IT));
+
+ /* Check if the interrupt source is enabled or not */
+ enablestatus = (uint32_t)(((I2C_IT & ITEN_Mask) >> 16) & (I2Cx->CR2)) ;
+
+ /* Get bit[23:0] of the flag */
+ I2C_IT &= FLAG_Mask;
+
+ /* Check the status of the specified I2C flag */
+ if (((I2Cx->SR1 & I2C_IT) != (uint32_t)RESET) && enablestatus)
+ {
+ /* I2C_IT is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* I2C_IT is reset */
+ bitstatus = RESET;
+ }
+ /* Return the I2C_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the I2Cx’s interrupt pending bits.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_IT: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg I2C_IT_SMBALERT: SMBus Alert interrupt
+ * @arg I2C_IT_TIMEOUT: Timeout or Tlow error interrupt
+ * @arg I2C_IT_PECERR: PEC error in reception interrupt
+ * @arg I2C_IT_OVR: Overrun/Underrun interrupt (Slave mode)
+ * @arg I2C_IT_AF: Acknowledge failure interrupt
+ * @arg I2C_IT_ARLO: Arbitration lost interrupt (Master mode)
+ * @arg I2C_IT_BERR: Bus error interrupt
+ *
+ * @note
+ * - STOPF (STOP detection) is cleared by software sequence: a read operation
+ * to I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to
+ * I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral).
+ * - ADD10 (10-bit header sent) is cleared by software sequence: a read
+ * operation to I2C_SR1 (I2C_GetITStatus()) followed by writing the second
+ * byte of the address in I2C_DR register.
+ * - BTF (Byte Transfer Finished) is cleared by software sequence: a read
+ * operation to I2C_SR1 register (I2C_GetITStatus()) followed by a
+ * read/write to I2C_DR register (I2C_SendData()).
+ * - ADDR (Address sent) is cleared by software sequence: a read operation to
+ * I2C_SR1 register (I2C_GetITStatus()) followed by a read operation to
+ * I2C_SR2 register ((void)(I2Cx->SR2)).
+ * - SB (Start Bit) is cleared by software sequence: a read operation to
+ * I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to
+ * I2C_DR register (I2C_SendData()).
+ * @retval None
+ */
+void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT)
+{
+ uint32_t flagpos = 0;
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_CLEAR_IT(I2C_IT));
+ /* Get the I2C flag position */
+ flagpos = I2C_IT & FLAG_Mask;
+ /* Clear the selected I2C flag */
+ I2Cx->SR1 = (uint16_t)~flagpos;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_iwdg.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_iwdg.c
new file mode 100644
index 00000000..9d3b0e85
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_iwdg.c
@@ -0,0 +1,190 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_iwdg.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the IWDG firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_iwdg.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup IWDG
+ * @brief IWDG driver modules
+ * @{
+ */
+
+/** @defgroup IWDG_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Private_Defines
+ * @{
+ */
+
+/* ---------------------- IWDG registers bit mask ----------------------------*/
+
+/* KR register bit mask */
+#define KR_KEY_Reload ((uint16_t)0xAAAA)
+#define KR_KEY_Enable ((uint16_t)0xCCCC)
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Enables or disables write access to IWDG_PR and IWDG_RLR registers.
+ * @param IWDG_WriteAccess: new state of write access to IWDG_PR and IWDG_RLR registers.
+ * This parameter can be one of the following values:
+ * @arg IWDG_WriteAccess_Enable: Enable write access to IWDG_PR and IWDG_RLR registers
+ * @arg IWDG_WriteAccess_Disable: Disable write access to IWDG_PR and IWDG_RLR registers
+ * @retval None
+ */
+void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess)
+{
+ /* Check the parameters */
+ assert_param(IS_IWDG_WRITE_ACCESS(IWDG_WriteAccess));
+ IWDG->KR = IWDG_WriteAccess;
+}
+
+/**
+ * @brief Sets IWDG Prescaler value.
+ * @param IWDG_Prescaler: specifies the IWDG Prescaler value.
+ * This parameter can be one of the following values:
+ * @arg IWDG_Prescaler_4: IWDG prescaler set to 4
+ * @arg IWDG_Prescaler_8: IWDG prescaler set to 8
+ * @arg IWDG_Prescaler_16: IWDG prescaler set to 16
+ * @arg IWDG_Prescaler_32: IWDG prescaler set to 32
+ * @arg IWDG_Prescaler_64: IWDG prescaler set to 64
+ * @arg IWDG_Prescaler_128: IWDG prescaler set to 128
+ * @arg IWDG_Prescaler_256: IWDG prescaler set to 256
+ * @retval None
+ */
+void IWDG_SetPrescaler(uint8_t IWDG_Prescaler)
+{
+ /* Check the parameters */
+ assert_param(IS_IWDG_PRESCALER(IWDG_Prescaler));
+ IWDG->PR = IWDG_Prescaler;
+}
+
+/**
+ * @brief Sets IWDG Reload value.
+ * @param Reload: specifies the IWDG Reload value.
+ * This parameter must be a number between 0 and 0x0FFF.
+ * @retval None
+ */
+void IWDG_SetReload(uint16_t Reload)
+{
+ /* Check the parameters */
+ assert_param(IS_IWDG_RELOAD(Reload));
+ IWDG->RLR = Reload;
+}
+
+/**
+ * @brief Reloads IWDG counter with value defined in the reload register
+ * (write access to IWDG_PR and IWDG_RLR registers disabled).
+ * @param None
+ * @retval None
+ */
+void IWDG_ReloadCounter(void)
+{
+ IWDG->KR = KR_KEY_Reload;
+}
+
+/**
+ * @brief Enables IWDG (write access to IWDG_PR and IWDG_RLR registers disabled).
+ * @param None
+ * @retval None
+ */
+void IWDG_Enable(void)
+{
+ IWDG->KR = KR_KEY_Enable;
+}
+
+/**
+ * @brief Checks whether the specified IWDG flag is set or not.
+ * @param IWDG_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IWDG_FLAG_PVU: Prescaler Value Update on going
+ * @arg IWDG_FLAG_RVU: Reload Value Update on going
+ * @retval The new state of IWDG_FLAG (SET or RESET).
+ */
+FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_IWDG_FLAG(IWDG_FLAG));
+ if ((IWDG->SR & IWDG_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ /* Return the flag status */
+ return bitstatus;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_pwr.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_pwr.c
new file mode 100644
index 00000000..147bf0f8
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_pwr.c
@@ -0,0 +1,307 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_pwr.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the PWR firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_pwr.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup PWR
+ * @brief PWR driver modules
+ * @{
+ */
+
+/** @defgroup PWR_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Private_Defines
+ * @{
+ */
+
+/* --------- PWR registers bit address in the alias region ---------- */
+#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
+
+/* --- CR Register ---*/
+
+/* Alias word address of DBP bit */
+#define CR_OFFSET (PWR_OFFSET + 0x00)
+#define DBP_BitNumber 0x08
+#define CR_DBP_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4))
+
+/* Alias word address of PVDE bit */
+#define PVDE_BitNumber 0x04
+#define CR_PVDE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4))
+
+/* --- CSR Register ---*/
+
+/* Alias word address of EWUP bit */
+#define CSR_OFFSET (PWR_OFFSET + 0x04)
+#define EWUP_BitNumber 0x08
+#define CSR_EWUP_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4))
+
+/* ------------------ PWR registers bit mask ------------------------ */
+
+/* CR register bit mask */
+#define CR_DS_MASK ((uint32_t)0xFFFFFFFC)
+#define CR_PLS_MASK ((uint32_t)0xFFFFFF1F)
+
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the PWR peripheral registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void PWR_DeInit(void)
+{
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE);
+}
+
+/**
+ * @brief Enables or disables access to the RTC and backup registers.
+ * @param NewState: new state of the access to the RTC and backup registers.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void PWR_BackupAccessCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_DBP_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enables or disables the Power Voltage Detector(PVD).
+ * @param NewState: new state of the PVD.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void PWR_PVDCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
+ * @param PWR_PVDLevel: specifies the PVD detection level
+ * This parameter can be one of the following values:
+ * @arg PWR_PVDLevel_2V2: PVD detection level set to 2.2V
+ * @arg PWR_PVDLevel_2V3: PVD detection level set to 2.3V
+ * @arg PWR_PVDLevel_2V4: PVD detection level set to 2.4V
+ * @arg PWR_PVDLevel_2V5: PVD detection level set to 2.5V
+ * @arg PWR_PVDLevel_2V6: PVD detection level set to 2.6V
+ * @arg PWR_PVDLevel_2V7: PVD detection level set to 2.7V
+ * @arg PWR_PVDLevel_2V8: PVD detection level set to 2.8V
+ * @arg PWR_PVDLevel_2V9: PVD detection level set to 2.9V
+ * @retval None
+ */
+void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_PWR_PVD_LEVEL(PWR_PVDLevel));
+ tmpreg = PWR->CR;
+ /* Clear PLS[7:5] bits */
+ tmpreg &= CR_PLS_MASK;
+ /* Set PLS[7:5] bits according to PWR_PVDLevel value */
+ tmpreg |= PWR_PVDLevel;
+ /* Store the new value */
+ PWR->CR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the WakeUp Pin functionality.
+ * @param NewState: new state of the WakeUp Pin functionality.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void PWR_WakeUpPinCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CSR_EWUP_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enters STOP mode.
+ * @param PWR_Regulator: specifies the regulator state in STOP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_Regulator_ON: STOP mode with regulator ON
+ * @arg PWR_Regulator_LowPower: STOP mode with regulator in low power mode
+ * @param PWR_STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_STOPEntry_WFI: enter STOP mode with WFI instruction
+ * @arg PWR_STOPEntry_WFE: enter STOP mode with WFE instruction
+ * @retval None
+ */
+void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR(PWR_Regulator));
+ assert_param(IS_PWR_STOP_ENTRY(PWR_STOPEntry));
+
+ /* Select the regulator state in STOP mode ---------------------------------*/
+ tmpreg = PWR->CR;
+ /* Clear PDDS and LPDS bits */
+ tmpreg &= CR_DS_MASK;
+ /* Set LPDS bit according to PWR_Regulator value */
+ tmpreg |= PWR_Regulator;
+ /* Store the new value */
+ PWR->CR = tmpreg;
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP;
+
+ /* Select STOP mode entry --------------------------------------------------*/
+ if(PWR_STOPEntry == PWR_STOPEntry_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __WFE();
+ }
+
+ /* Reset SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP);
+}
+
+/**
+ * @brief Enters STANDBY mode.
+ * @param None
+ * @retval None
+ */
+void PWR_EnterSTANDBYMode(void)
+{
+ /* Clear Wake-up flag */
+ PWR->CR |= PWR_CR_CWUF;
+ /* Select STANDBY mode */
+ PWR->CR |= PWR_CR_PDDS;
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP;
+/* This option is used to ensure that store operations are completed */
+#if defined ( __CC_ARM )
+ __force_stores();
+#endif
+ /* Request Wait For Interrupt */
+ __WFI();
+}
+
+/**
+ * @brief Checks whether the specified PWR flag is set or not.
+ * @param PWR_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag
+ * @arg PWR_FLAG_SB: StandBy flag
+ * @arg PWR_FLAG_PVDO: PVD Output
+ * @retval The new state of PWR_FLAG (SET or RESET).
+ */
+FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_PWR_GET_FLAG(PWR_FLAG));
+
+ if ((PWR->CSR & PWR_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ /* Return the flag status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the PWR's pending flags.
+ * @param PWR_FLAG: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag
+ * @arg PWR_FLAG_SB: StandBy flag
+ * @retval None
+ */
+void PWR_ClearFlag(uint32_t PWR_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_CLEAR_FLAG(PWR_FLAG));
+
+ PWR->CR |= PWR_FLAG << 2;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_rcc.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_rcc.c
new file mode 100644
index 00000000..4b2ec1f1
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_rcc.c
@@ -0,0 +1,1470 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_rcc.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the RCC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup RCC
+ * @brief RCC driver modules
+ * @{
+ */
+
+/** @defgroup RCC_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Private_Defines
+ * @{
+ */
+
+/* ------------ RCC registers bit address in the alias region ----------- */
+#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
+
+/* --- CR Register ---*/
+
+/* Alias word address of HSION bit */
+#define CR_OFFSET (RCC_OFFSET + 0x00)
+#define HSION_BitNumber 0x00
+#define CR_HSION_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (HSION_BitNumber * 4))
+
+/* Alias word address of PLLON bit */
+#define PLLON_BitNumber 0x18
+#define CR_PLLON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLON_BitNumber * 4))
+
+#ifdef STM32F10X_CL
+ /* Alias word address of PLL2ON bit */
+ #define PLL2ON_BitNumber 0x1A
+ #define CR_PLL2ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL2ON_BitNumber * 4))
+
+ /* Alias word address of PLL3ON bit */
+ #define PLL3ON_BitNumber 0x1C
+ #define CR_PLL3ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL3ON_BitNumber * 4))
+#endif /* STM32F10X_CL */
+
+/* Alias word address of CSSON bit */
+#define CSSON_BitNumber 0x13
+#define CR_CSSON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (CSSON_BitNumber * 4))
+
+/* --- CFGR Register ---*/
+
+/* Alias word address of USBPRE bit */
+#define CFGR_OFFSET (RCC_OFFSET + 0x04)
+
+#ifndef STM32F10X_CL
+ #define USBPRE_BitNumber 0x16
+ #define CFGR_USBPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (USBPRE_BitNumber * 4))
+#else
+ #define OTGFSPRE_BitNumber 0x16
+ #define CFGR_OTGFSPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (OTGFSPRE_BitNumber * 4))
+#endif /* STM32F10X_CL */
+
+/* --- BDCR Register ---*/
+
+/* Alias word address of RTCEN bit */
+#define BDCR_OFFSET (RCC_OFFSET + 0x20)
+#define RTCEN_BitNumber 0x0F
+#define BDCR_RTCEN_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4))
+
+/* Alias word address of BDRST bit */
+#define BDRST_BitNumber 0x10
+#define BDCR_BDRST_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (BDRST_BitNumber * 4))
+
+/* --- CSR Register ---*/
+
+/* Alias word address of LSION bit */
+#define CSR_OFFSET (RCC_OFFSET + 0x24)
+#define LSION_BitNumber 0x00
+#define CSR_LSION_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (LSION_BitNumber * 4))
+
+#ifdef STM32F10X_CL
+/* --- CFGR2 Register ---*/
+
+ /* Alias word address of I2S2SRC bit */
+ #define CFGR2_OFFSET (RCC_OFFSET + 0x2C)
+ #define I2S2SRC_BitNumber 0x11
+ #define CFGR2_I2S2SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S2SRC_BitNumber * 4))
+
+ /* Alias word address of I2S3SRC bit */
+ #define I2S3SRC_BitNumber 0x12
+ #define CFGR2_I2S3SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S3SRC_BitNumber * 4))
+#endif /* STM32F10X_CL */
+
+/* ---------------------- RCC registers bit mask ------------------------ */
+
+/* CR register bit mask */
+#define CR_HSEBYP_Reset ((uint32_t)0xFFFBFFFF)
+#define CR_HSEBYP_Set ((uint32_t)0x00040000)
+#define CR_HSEON_Reset ((uint32_t)0xFFFEFFFF)
+#define CR_HSEON_Set ((uint32_t)0x00010000)
+#define CR_HSITRIM_Mask ((uint32_t)0xFFFFFF07)
+
+/* CFGR register bit mask */
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+ #define CFGR_PLL_Mask ((uint32_t)0xFFC2FFFF)
+#else
+ #define CFGR_PLL_Mask ((uint32_t)0xFFC0FFFF)
+#endif /* STM32F10X_CL */
+
+#define CFGR_PLLMull_Mask ((uint32_t)0x003C0000)
+#define CFGR_PLLSRC_Mask ((uint32_t)0x00010000)
+#define CFGR_PLLXTPRE_Mask ((uint32_t)0x00020000)
+#define CFGR_SWS_Mask ((uint32_t)0x0000000C)
+#define CFGR_SW_Mask ((uint32_t)0xFFFFFFFC)
+#define CFGR_HPRE_Reset_Mask ((uint32_t)0xFFFFFF0F)
+#define CFGR_HPRE_Set_Mask ((uint32_t)0x000000F0)
+#define CFGR_PPRE1_Reset_Mask ((uint32_t)0xFFFFF8FF)
+#define CFGR_PPRE1_Set_Mask ((uint32_t)0x00000700)
+#define CFGR_PPRE2_Reset_Mask ((uint32_t)0xFFFFC7FF)
+#define CFGR_PPRE2_Set_Mask ((uint32_t)0x00003800)
+#define CFGR_ADCPRE_Reset_Mask ((uint32_t)0xFFFF3FFF)
+#define CFGR_ADCPRE_Set_Mask ((uint32_t)0x0000C000)
+
+/* CSR register bit mask */
+#define CSR_RMVF_Set ((uint32_t)0x01000000)
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+/* CFGR2 register bit mask */
+ #define CFGR2_PREDIV1SRC ((uint32_t)0x00010000)
+ #define CFGR2_PREDIV1 ((uint32_t)0x0000000F)
+#endif
+#ifdef STM32F10X_CL
+ #define CFGR2_PREDIV2 ((uint32_t)0x000000F0)
+ #define CFGR2_PLL2MUL ((uint32_t)0x00000F00)
+ #define CFGR2_PLL3MUL ((uint32_t)0x0000F000)
+#endif /* STM32F10X_CL */
+
+/* RCC Flag Mask */
+#define FLAG_Mask ((uint8_t)0x1F)
+
+/* CIR register byte 2 (Bits[15:8]) base address */
+#define CIR_BYTE2_ADDRESS ((uint32_t)0x40021009)
+
+/* CIR register byte 3 (Bits[23:16]) base address */
+#define CIR_BYTE3_ADDRESS ((uint32_t)0x4002100A)
+
+/* CFGR register byte 4 (Bits[31:24]) base address */
+#define CFGR_BYTE4_ADDRESS ((uint32_t)0x40021007)
+
+/* BDCR register base address */
+#define BDCR_ADDRESS (PERIPH_BASE + BDCR_OFFSET)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Private_Variables
+ * @{
+ */
+
+static __I uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9};
+static __I uint8_t ADCPrescTable[4] = {2, 4, 6, 8};
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Resets the RCC clock configuration to the default reset state.
+ * @param None
+ * @retval None
+ */
+void RCC_DeInit(void)
+{
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001;
+
+ /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
+#ifndef STM32F10X_CL
+ RCC->CFGR &= (uint32_t)0xF8FF0000;
+#else
+ RCC->CFGR &= (uint32_t)0xF0FF0000;
+#endif /* STM32F10X_CL */
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
+ RCC->CFGR &= (uint32_t)0xFF80FFFF;
+
+#ifdef STM32F10X_CL
+ /* Reset PLL2ON and PLL3ON bits */
+ RCC->CR &= (uint32_t)0xEBFFFFFF;
+
+ /* Disable all interrupts and clear pending bits */
+ RCC->CIR = 0x00FF0000;
+
+ /* Reset CFGR2 register */
+ RCC->CFGR2 = 0x00000000;
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+ /* Disable all interrupts and clear pending bits */
+ RCC->CIR = 0x009F0000;
+
+ /* Reset CFGR2 register */
+ RCC->CFGR2 = 0x00000000;
+#else
+ /* Disable all interrupts and clear pending bits */
+ RCC->CIR = 0x009F0000;
+#endif /* STM32F10X_CL */
+
+}
+
+/**
+ * @brief Configures the External High Speed oscillator (HSE).
+ * @note HSE can not be stopped if it is used directly or through the PLL as system clock.
+ * @param RCC_HSE: specifies the new state of the HSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_HSE_OFF: HSE oscillator OFF
+ * @arg RCC_HSE_ON: HSE oscillator ON
+ * @arg RCC_HSE_Bypass: HSE oscillator bypassed with external clock
+ * @retval None
+ */
+void RCC_HSEConfig(uint32_t RCC_HSE)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_HSE(RCC_HSE));
+ /* Reset HSEON and HSEBYP bits before configuring the HSE ------------------*/
+ /* Reset HSEON bit */
+ RCC->CR &= CR_HSEON_Reset;
+ /* Reset HSEBYP bit */
+ RCC->CR &= CR_HSEBYP_Reset;
+ /* Configure HSE (RCC_HSE_OFF is already covered by the code section above) */
+ switch(RCC_HSE)
+ {
+ case RCC_HSE_ON:
+ /* Set HSEON bit */
+ RCC->CR |= CR_HSEON_Set;
+ break;
+
+ case RCC_HSE_Bypass:
+ /* Set HSEBYP and HSEON bits */
+ RCC->CR |= CR_HSEBYP_Set | CR_HSEON_Set;
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief Waits for HSE start-up.
+ * @param None
+ * @retval An ErrorStatus enumuration value:
+ * - SUCCESS: HSE oscillator is stable and ready to use
+ * - ERROR: HSE oscillator not yet ready
+ */
+ErrorStatus RCC_WaitForHSEStartUp(void)
+{
+ __IO uint32_t StartUpCounter = 0;
+ ErrorStatus status = ERROR;
+ FlagStatus HSEStatus = RESET;
+
+ /* Wait till HSE is ready and if Time out is reached exit */
+ do
+ {
+ HSEStatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY);
+ StartUpCounter++;
+ } while((StartUpCounter != HSE_STARTUP_TIMEOUT) && (HSEStatus == RESET));
+
+ if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET)
+ {
+ status = SUCCESS;
+ }
+ else
+ {
+ status = ERROR;
+ }
+ return (status);
+}
+
+/**
+ * @brief Adjusts the Internal High Speed oscillator (HSI) calibration value.
+ * @param HSICalibrationValue: specifies the calibration trimming value.
+ * This parameter must be a number between 0 and 0x1F.
+ * @retval None
+ */
+void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_RCC_CALIBRATION_VALUE(HSICalibrationValue));
+ tmpreg = RCC->CR;
+ /* Clear HSITRIM[4:0] bits */
+ tmpreg &= CR_HSITRIM_Mask;
+ /* Set the HSITRIM[4:0] bits according to HSICalibrationValue value */
+ tmpreg |= (uint32_t)HSICalibrationValue << 3;
+ /* Store the new value */
+ RCC->CR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the Internal High Speed oscillator (HSI).
+ * @note HSI can not be stopped if it is used directly or through the PLL as system clock.
+ * @param NewState: new state of the HSI. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_HSICmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_HSION_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Configures the PLL clock source and multiplication factor.
+ * @note This function must be used only when the PLL is disabled.
+ * @param RCC_PLLSource: specifies the PLL entry clock source.
+ * For @b STM32_Connectivity_line_devices or @b STM32_Value_line_devices,
+ * this parameter can be one of the following values:
+ * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry
+ * @arg RCC_PLLSource_PREDIV1: PREDIV1 clock selected as PLL clock entry
+ * For @b other_STM32_devices, this parameter can be one of the following values:
+ * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry
+ * @arg RCC_PLLSource_HSE_Div1: HSE oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSource_HSE_Div2: HSE oscillator clock divided by 2 selected as PLL clock entry
+ * @param RCC_PLLMul: specifies the PLL multiplication factor.
+ * For @b STM32_Connectivity_line_devices, this parameter can be RCC_PLLMul_x where x:{[4,9], 6_5}
+ * For @b other_STM32_devices, this parameter can be RCC_PLLMul_x where x:[2,16]
+ * @retval None
+ */
+void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource));
+ assert_param(IS_RCC_PLL_MUL(RCC_PLLMul));
+
+ tmpreg = RCC->CFGR;
+ /* Clear PLLSRC, PLLXTPRE and PLLMUL[3:0] bits */
+ tmpreg &= CFGR_PLL_Mask;
+ /* Set the PLL configuration bits */
+ tmpreg |= RCC_PLLSource | RCC_PLLMul;
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the PLL.
+ * @note The PLL can not be disabled if it is used as system clock.
+ * @param NewState: new state of the PLL. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_PLLCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CR_PLLON_BB = (uint32_t)NewState;
+}
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+/**
+ * @brief Configures the PREDIV1 division factor.
+ * @note
+ * - This function must be used only when the PLL is disabled.
+ * - This function applies only to STM32 Connectivity line and Value line
+ * devices.
+ * @param RCC_PREDIV1_Source: specifies the PREDIV1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PREDIV1_Source_HSE: HSE selected as PREDIV1 clock
+ * @arg RCC_PREDIV1_Source_PLL2: PLL2 selected as PREDIV1 clock
+ * @note
+ * For @b STM32_Value_line_devices this parameter is always RCC_PREDIV1_Source_HSE
+ * @param RCC_PREDIV1_Div: specifies the PREDIV1 clock division factor.
+ * This parameter can be RCC_PREDIV1_Divx where x:[1,16]
+ * @retval None
+ */
+void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PREDIV1_SOURCE(RCC_PREDIV1_Source));
+ assert_param(IS_RCC_PREDIV1(RCC_PREDIV1_Div));
+
+ tmpreg = RCC->CFGR2;
+ /* Clear PREDIV1[3:0] and PREDIV1SRC bits */
+ tmpreg &= ~(CFGR2_PREDIV1 | CFGR2_PREDIV1SRC);
+ /* Set the PREDIV1 clock source and division factor */
+ tmpreg |= RCC_PREDIV1_Source | RCC_PREDIV1_Div ;
+ /* Store the new value */
+ RCC->CFGR2 = tmpreg;
+}
+#endif
+
+#ifdef STM32F10X_CL
+/**
+ * @brief Configures the PREDIV2 division factor.
+ * @note
+ * - This function must be used only when both PLL2 and PLL3 are disabled.
+ * - This function applies only to STM32 Connectivity line devices.
+ * @param RCC_PREDIV2_Div: specifies the PREDIV2 clock division factor.
+ * This parameter can be RCC_PREDIV2_Divx where x:[1,16]
+ * @retval None
+ */
+void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PREDIV2(RCC_PREDIV2_Div));
+
+ tmpreg = RCC->CFGR2;
+ /* Clear PREDIV2[3:0] bits */
+ tmpreg &= ~CFGR2_PREDIV2;
+ /* Set the PREDIV2 division factor */
+ tmpreg |= RCC_PREDIV2_Div;
+ /* Store the new value */
+ RCC->CFGR2 = tmpreg;
+}
+
+/**
+ * @brief Configures the PLL2 multiplication factor.
+ * @note
+ * - This function must be used only when the PLL2 is disabled.
+ * - This function applies only to STM32 Connectivity line devices.
+ * @param RCC_PLL2Mul: specifies the PLL2 multiplication factor.
+ * This parameter can be RCC_PLL2Mul_x where x:{[8,14], 16, 20}
+ * @retval None
+ */
+void RCC_PLL2Config(uint32_t RCC_PLL2Mul)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL2_MUL(RCC_PLL2Mul));
+
+ tmpreg = RCC->CFGR2;
+ /* Clear PLL2Mul[3:0] bits */
+ tmpreg &= ~CFGR2_PLL2MUL;
+ /* Set the PLL2 configuration bits */
+ tmpreg |= RCC_PLL2Mul;
+ /* Store the new value */
+ RCC->CFGR2 = tmpreg;
+}
+
+
+/**
+ * @brief Enables or disables the PLL2.
+ * @note
+ * - The PLL2 can not be disabled if it is used indirectly as system clock
+ * (i.e. it is used as PLL clock entry that is used as System clock).
+ * - This function applies only to STM32 Connectivity line devices.
+ * @param NewState: new state of the PLL2. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_PLL2Cmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CR_PLL2ON_BB = (uint32_t)NewState;
+}
+
+
+/**
+ * @brief Configures the PLL3 multiplication factor.
+ * @note
+ * - This function must be used only when the PLL3 is disabled.
+ * - This function applies only to STM32 Connectivity line devices.
+ * @param RCC_PLL3Mul: specifies the PLL3 multiplication factor.
+ * This parameter can be RCC_PLL3Mul_x where x:{[8,14], 16, 20}
+ * @retval None
+ */
+void RCC_PLL3Config(uint32_t RCC_PLL3Mul)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL3_MUL(RCC_PLL3Mul));
+
+ tmpreg = RCC->CFGR2;
+ /* Clear PLL3Mul[3:0] bits */
+ tmpreg &= ~CFGR2_PLL3MUL;
+ /* Set the PLL3 configuration bits */
+ tmpreg |= RCC_PLL3Mul;
+ /* Store the new value */
+ RCC->CFGR2 = tmpreg;
+}
+
+
+/**
+ * @brief Enables or disables the PLL3.
+ * @note This function applies only to STM32 Connectivity line devices.
+ * @param NewState: new state of the PLL3. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_PLL3Cmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_PLL3ON_BB = (uint32_t)NewState;
+}
+#endif /* STM32F10X_CL */
+
+/**
+ * @brief Configures the system clock (SYSCLK).
+ * @param RCC_SYSCLKSource: specifies the clock source used as system clock.
+ * This parameter can be one of the following values:
+ * @arg RCC_SYSCLKSource_HSI: HSI selected as system clock
+ * @arg RCC_SYSCLKSource_HSE: HSE selected as system clock
+ * @arg RCC_SYSCLKSource_PLLCLK: PLL selected as system clock
+ * @retval None
+ */
+void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_RCC_SYSCLK_SOURCE(RCC_SYSCLKSource));
+ tmpreg = RCC->CFGR;
+ /* Clear SW[1:0] bits */
+ tmpreg &= CFGR_SW_Mask;
+ /* Set SW[1:0] bits according to RCC_SYSCLKSource value */
+ tmpreg |= RCC_SYSCLKSource;
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @brief Returns the clock source used as system clock.
+ * @param None
+ * @retval The clock source used as system clock. The returned value can
+ * be one of the following:
+ * - 0x00: HSI used as system clock
+ * - 0x04: HSE used as system clock
+ * - 0x08: PLL used as system clock
+ */
+uint8_t RCC_GetSYSCLKSource(void)
+{
+ return ((uint8_t)(RCC->CFGR & CFGR_SWS_Mask));
+}
+
+/**
+ * @brief Configures the AHB clock (HCLK).
+ * @param RCC_SYSCLK: defines the AHB clock divider. This clock is derived from
+ * the system clock (SYSCLK).
+ * This parameter can be one of the following values:
+ * @arg RCC_SYSCLK_Div1: AHB clock = SYSCLK
+ * @arg RCC_SYSCLK_Div2: AHB clock = SYSCLK/2
+ * @arg RCC_SYSCLK_Div4: AHB clock = SYSCLK/4
+ * @arg RCC_SYSCLK_Div8: AHB clock = SYSCLK/8
+ * @arg RCC_SYSCLK_Div16: AHB clock = SYSCLK/16
+ * @arg RCC_SYSCLK_Div64: AHB clock = SYSCLK/64
+ * @arg RCC_SYSCLK_Div128: AHB clock = SYSCLK/128
+ * @arg RCC_SYSCLK_Div256: AHB clock = SYSCLK/256
+ * @arg RCC_SYSCLK_Div512: AHB clock = SYSCLK/512
+ * @retval None
+ */
+void RCC_HCLKConfig(uint32_t RCC_SYSCLK)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_RCC_HCLK(RCC_SYSCLK));
+ tmpreg = RCC->CFGR;
+ /* Clear HPRE[3:0] bits */
+ tmpreg &= CFGR_HPRE_Reset_Mask;
+ /* Set HPRE[3:0] bits according to RCC_SYSCLK value */
+ tmpreg |= RCC_SYSCLK;
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @brief Configures the Low Speed APB clock (PCLK1).
+ * @param RCC_HCLK: defines the APB1 clock divider. This clock is derived from
+ * the AHB clock (HCLK).
+ * This parameter can be one of the following values:
+ * @arg RCC_HCLK_Div1: APB1 clock = HCLK
+ * @arg RCC_HCLK_Div2: APB1 clock = HCLK/2
+ * @arg RCC_HCLK_Div4: APB1 clock = HCLK/4
+ * @arg RCC_HCLK_Div8: APB1 clock = HCLK/8
+ * @arg RCC_HCLK_Div16: APB1 clock = HCLK/16
+ * @retval None
+ */
+void RCC_PCLK1Config(uint32_t RCC_HCLK)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_RCC_PCLK(RCC_HCLK));
+ tmpreg = RCC->CFGR;
+ /* Clear PPRE1[2:0] bits */
+ tmpreg &= CFGR_PPRE1_Reset_Mask;
+ /* Set PPRE1[2:0] bits according to RCC_HCLK value */
+ tmpreg |= RCC_HCLK;
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @brief Configures the High Speed APB clock (PCLK2).
+ * @param RCC_HCLK: defines the APB2 clock divider. This clock is derived from
+ * the AHB clock (HCLK).
+ * This parameter can be one of the following values:
+ * @arg RCC_HCLK_Div1: APB2 clock = HCLK
+ * @arg RCC_HCLK_Div2: APB2 clock = HCLK/2
+ * @arg RCC_HCLK_Div4: APB2 clock = HCLK/4
+ * @arg RCC_HCLK_Div8: APB2 clock = HCLK/8
+ * @arg RCC_HCLK_Div16: APB2 clock = HCLK/16
+ * @retval None
+ */
+void RCC_PCLK2Config(uint32_t RCC_HCLK)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_RCC_PCLK(RCC_HCLK));
+ tmpreg = RCC->CFGR;
+ /* Clear PPRE2[2:0] bits */
+ tmpreg &= CFGR_PPRE2_Reset_Mask;
+ /* Set PPRE2[2:0] bits according to RCC_HCLK value */
+ tmpreg |= RCC_HCLK << 3;
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the specified RCC interrupts.
+ * @param RCC_IT: specifies the RCC interrupt sources to be enabled or disabled.
+ *
+ * For @b STM32_Connectivity_line_devices, this parameter can be any combination
+ * of the following values
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt
+ * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt
+ * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt
+ *
+ * For @b other_STM32_devices, this parameter can be any combination of the
+ * following values
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt
+ *
+ * @param NewState: new state of the specified RCC interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_IT(RCC_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Perform Byte access to RCC_CIR bits to enable the selected interrupts */
+ *(__IO uint8_t *) CIR_BYTE2_ADDRESS |= RCC_IT;
+ }
+ else
+ {
+ /* Perform Byte access to RCC_CIR bits to disable the selected interrupts */
+ *(__IO uint8_t *) CIR_BYTE2_ADDRESS &= (uint8_t)~RCC_IT;
+ }
+}
+
+#ifndef STM32F10X_CL
+/**
+ * @brief Configures the USB clock (USBCLK).
+ * @param RCC_USBCLKSource: specifies the USB clock source. This clock is
+ * derived from the PLL output.
+ * This parameter can be one of the following values:
+ * @arg RCC_USBCLKSource_PLLCLK_1Div5: PLL clock divided by 1,5 selected as USB
+ * clock source
+ * @arg RCC_USBCLKSource_PLLCLK_Div1: PLL clock selected as USB clock source
+ * @retval None
+ */
+void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_USBCLK_SOURCE(RCC_USBCLKSource));
+
+ *(__IO uint32_t *) CFGR_USBPRE_BB = RCC_USBCLKSource;
+}
+#else
+/**
+ * @brief Configures the USB OTG FS clock (OTGFSCLK).
+ * This function applies only to STM32 Connectivity line devices.
+ * @param RCC_OTGFSCLKSource: specifies the USB OTG FS clock source.
+ * This clock is derived from the PLL output.
+ * This parameter can be one of the following values:
+ * @arg RCC_OTGFSCLKSource_PLLVCO_Div3: PLL VCO clock divided by 2 selected as USB OTG FS clock source
+ * @arg RCC_OTGFSCLKSource_PLLVCO_Div2: PLL VCO clock divided by 2 selected as USB OTG FS clock source
+ * @retval None
+ */
+void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_OTGFSCLK_SOURCE(RCC_OTGFSCLKSource));
+
+ *(__IO uint32_t *) CFGR_OTGFSPRE_BB = RCC_OTGFSCLKSource;
+}
+#endif /* STM32F10X_CL */
+
+/**
+ * @brief Configures the ADC clock (ADCCLK).
+ * @param RCC_PCLK2: defines the ADC clock divider. This clock is derived from
+ * the APB2 clock (PCLK2).
+ * This parameter can be one of the following values:
+ * @arg RCC_PCLK2_Div2: ADC clock = PCLK2/2
+ * @arg RCC_PCLK2_Div4: ADC clock = PCLK2/4
+ * @arg RCC_PCLK2_Div6: ADC clock = PCLK2/6
+ * @arg RCC_PCLK2_Div8: ADC clock = PCLK2/8
+ * @retval None
+ */
+void RCC_ADCCLKConfig(uint32_t RCC_PCLK2)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_RCC_ADCCLK(RCC_PCLK2));
+ tmpreg = RCC->CFGR;
+ /* Clear ADCPRE[1:0] bits */
+ tmpreg &= CFGR_ADCPRE_Reset_Mask;
+ /* Set ADCPRE[1:0] bits according to RCC_PCLK2 value */
+ tmpreg |= RCC_PCLK2;
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+#ifdef STM32F10X_CL
+/**
+ * @brief Configures the I2S2 clock source(I2S2CLK).
+ * @note
+ * - This function must be called before enabling I2S2 APB clock.
+ * - This function applies only to STM32 Connectivity line devices.
+ * @param RCC_I2S2CLKSource: specifies the I2S2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2S2CLKSource_SYSCLK: system clock selected as I2S2 clock entry
+ * @arg RCC_I2S2CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S2 clock entry
+ * @retval None
+ */
+void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_I2S2CLK_SOURCE(RCC_I2S2CLKSource));
+
+ *(__IO uint32_t *) CFGR2_I2S2SRC_BB = RCC_I2S2CLKSource;
+}
+
+/**
+ * @brief Configures the I2S3 clock source(I2S2CLK).
+ * @note
+ * - This function must be called before enabling I2S3 APB clock.
+ * - This function applies only to STM32 Connectivity line devices.
+ * @param RCC_I2S3CLKSource: specifies the I2S3 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2S3CLKSource_SYSCLK: system clock selected as I2S3 clock entry
+ * @arg RCC_I2S3CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S3 clock entry
+ * @retval None
+ */
+void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_I2S3CLK_SOURCE(RCC_I2S3CLKSource));
+
+ *(__IO uint32_t *) CFGR2_I2S3SRC_BB = RCC_I2S3CLKSource;
+}
+#endif /* STM32F10X_CL */
+
+/**
+ * @brief Configures the External Low Speed oscillator (LSE).
+ * @param RCC_LSE: specifies the new state of the LSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_LSE_OFF: LSE oscillator OFF
+ * @arg RCC_LSE_ON: LSE oscillator ON
+ * @arg RCC_LSE_Bypass: LSE oscillator bypassed with external clock
+ * @retval None
+ */
+void RCC_LSEConfig(uint8_t RCC_LSE)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_LSE(RCC_LSE));
+ /* Reset LSEON and LSEBYP bits before configuring the LSE ------------------*/
+ /* Reset LSEON bit */
+ *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF;
+ /* Reset LSEBYP bit */
+ *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF;
+ /* Configure LSE (RCC_LSE_OFF is already covered by the code section above) */
+ switch(RCC_LSE)
+ {
+ case RCC_LSE_ON:
+ /* Set LSEON bit */
+ *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_ON;
+ break;
+
+ case RCC_LSE_Bypass:
+ /* Set LSEBYP and LSEON bits */
+ *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_Bypass | RCC_LSE_ON;
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief Enables or disables the Internal Low Speed oscillator (LSI).
+ * @note LSI can not be disabled if the IWDG is running.
+ * @param NewState: new state of the LSI. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_LSICmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CSR_LSION_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Configures the RTC clock (RTCCLK).
+ * @note Once the RTC clock is selected it can't be changed unless the Backup domain is reset.
+ * @param RCC_RTCCLKSource: specifies the RTC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_RTCCLKSource_LSE: LSE selected as RTC clock
+ * @arg RCC_RTCCLKSource_LSI: LSI selected as RTC clock
+ * @arg RCC_RTCCLKSource_HSE_Div128: HSE clock divided by 128 selected as RTC clock
+ * @retval None
+ */
+void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_RTCCLK_SOURCE(RCC_RTCCLKSource));
+ /* Select the RTC clock source */
+ RCC->BDCR |= RCC_RTCCLKSource;
+}
+
+/**
+ * @brief Enables or disables the RTC clock.
+ * @note This function must be used only after the RTC clock was selected using the RCC_RTCCLKConfig function.
+ * @param NewState: new state of the RTC clock. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_RTCCLKCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) BDCR_RTCEN_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Returns the frequencies of different on chip clocks.
+ * @param RCC_Clocks: pointer to a RCC_ClocksTypeDef structure which will hold
+ * the clocks frequencies.
+ * @note The result of this function could be not correct when using
+ * fractional value for HSE crystal.
+ * @retval None
+ */
+void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks)
+{
+ uint32_t tmp = 0, pllmull = 0, pllsource = 0, presc = 0;
+
+#ifdef STM32F10X_CL
+ uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
+#endif /* STM32F10X_CL */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+ uint32_t prediv1factor = 0;
+#endif
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & CFGR_SWS_Mask;
+
+ switch (tmp)
+ {
+ case 0x00: /* HSI used as system clock */
+ RCC_Clocks->SYSCLK_Frequency = HSI_VALUE;
+ break;
+ case 0x04: /* HSE used as system clock */
+ RCC_Clocks->SYSCLK_Frequency = HSE_VALUE;
+ break;
+ case 0x08: /* PLL used as system clock */
+
+ /* Get PLL clock source and multiplication factor ----------------------*/
+ pllmull = RCC->CFGR & CFGR_PLLMull_Mask;
+ pllsource = RCC->CFGR & CFGR_PLLSRC_Mask;
+
+#ifndef STM32F10X_CL
+ pllmull = ( pllmull >> 18) + 2;
+
+ if (pllsource == 0x00)
+ {/* HSI oscillator clock divided by 2 selected as PLL clock entry */
+ RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull;
+ }
+ else
+ {
+ #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+ prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1;
+ /* HSE oscillator clock selected as PREDIV1 clock entry */
+ RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull;
+ #else
+ /* HSE selected as PLL clock entry */
+ if ((RCC->CFGR & CFGR_PLLXTPRE_Mask) != (uint32_t)RESET)
+ {/* HSE oscillator clock divided by 2 */
+ RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE >> 1) * pllmull;
+ }
+ else
+ {
+ RCC_Clocks->SYSCLK_Frequency = HSE_VALUE * pllmull;
+ }
+ #endif
+ }
+#else
+ pllmull = pllmull >> 18;
+
+ if (pllmull != 0x0D)
+ {
+ pllmull += 2;
+ }
+ else
+ { /* PLL multiplication factor = PLL input clock * 6.5 */
+ pllmull = 13 / 2;
+ }
+
+ if (pllsource == 0x00)
+ {/* HSI oscillator clock divided by 2 selected as PLL clock entry */
+ RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull;
+ }
+ else
+ {/* PREDIV1 selected as PLL clock entry */
+
+ /* Get PREDIV1 clock source and division factor */
+ prediv1source = RCC->CFGR2 & CFGR2_PREDIV1SRC;
+ prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1;
+
+ if (prediv1source == 0)
+ { /* HSE oscillator clock selected as PREDIV1 clock entry */
+ RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull;
+ }
+ else
+ {/* PLL2 clock selected as PREDIV1 clock entry */
+
+ /* Get PREDIV2 division factor and PLL2 multiplication factor */
+ prediv2factor = ((RCC->CFGR2 & CFGR2_PREDIV2) >> 4) + 1;
+ pll2mull = ((RCC->CFGR2 & CFGR2_PLL2MUL) >> 8 ) + 2;
+ RCC_Clocks->SYSCLK_Frequency = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;
+ }
+ }
+#endif /* STM32F10X_CL */
+ break;
+
+ default:
+ RCC_Clocks->SYSCLK_Frequency = HSI_VALUE;
+ break;
+ }
+
+ /* Compute HCLK, PCLK1, PCLK2 and ADCCLK clocks frequencies ----------------*/
+ /* Get HCLK prescaler */
+ tmp = RCC->CFGR & CFGR_HPRE_Set_Mask;
+ tmp = tmp >> 4;
+ presc = APBAHBPrescTable[tmp];
+ /* HCLK clock frequency */
+ RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc;
+ /* Get PCLK1 prescaler */
+ tmp = RCC->CFGR & CFGR_PPRE1_Set_Mask;
+ tmp = tmp >> 8;
+ presc = APBAHBPrescTable[tmp];
+ /* PCLK1 clock frequency */
+ RCC_Clocks->PCLK1_Frequency = RCC_Clocks->HCLK_Frequency >> presc;
+ /* Get PCLK2 prescaler */
+ tmp = RCC->CFGR & CFGR_PPRE2_Set_Mask;
+ tmp = tmp >> 11;
+ presc = APBAHBPrescTable[tmp];
+ /* PCLK2 clock frequency */
+ RCC_Clocks->PCLK2_Frequency = RCC_Clocks->HCLK_Frequency >> presc;
+ /* Get ADCCLK prescaler */
+ tmp = RCC->CFGR & CFGR_ADCPRE_Set_Mask;
+ tmp = tmp >> 14;
+ presc = ADCPrescTable[tmp];
+ /* ADCCLK clock frequency */
+ RCC_Clocks->ADCCLK_Frequency = RCC_Clocks->PCLK2_Frequency / presc;
+}
+
+/**
+ * @brief Enables or disables the AHB peripheral clock.
+ * @param RCC_AHBPeriph: specifies the AHB peripheral to gates its clock.
+ *
+ * For @b STM32_Connectivity_line_devices, this parameter can be any combination
+ * of the following values:
+ * @arg RCC_AHBPeriph_DMA1
+ * @arg RCC_AHBPeriph_DMA2
+ * @arg RCC_AHBPeriph_SRAM
+ * @arg RCC_AHBPeriph_FLITF
+ * @arg RCC_AHBPeriph_CRC
+ * @arg RCC_AHBPeriph_OTG_FS
+ * @arg RCC_AHBPeriph_ETH_MAC
+ * @arg RCC_AHBPeriph_ETH_MAC_Tx
+ * @arg RCC_AHBPeriph_ETH_MAC_Rx
+ *
+ * For @b other_STM32_devices, this parameter can be any combination of the
+ * following values:
+ * @arg RCC_AHBPeriph_DMA1
+ * @arg RCC_AHBPeriph_DMA2
+ * @arg RCC_AHBPeriph_SRAM
+ * @arg RCC_AHBPeriph_FLITF
+ * @arg RCC_AHBPeriph_CRC
+ * @arg RCC_AHBPeriph_FSMC
+ * @arg RCC_AHBPeriph_SDIO
+ *
+ * @note SRAM and FLITF clock can be disabled only during sleep mode.
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_AHB_PERIPH(RCC_AHBPeriph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ RCC->AHBENR |= RCC_AHBPeriph;
+ }
+ else
+ {
+ RCC->AHBENR &= ~RCC_AHBPeriph;
+ }
+}
+
+/**
+ * @brief Enables or disables the High Speed APB (APB2) peripheral clock.
+ * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB,
+ * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE,
+ * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1,
+ * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1,
+ * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3,
+ * RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17,
+ * RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->APB2ENR |= RCC_APB2Periph;
+ }
+ else
+ {
+ RCC->APB2ENR &= ~RCC_APB2Periph;
+ }
+}
+
+/**
+ * @brief Enables or disables the Low Speed APB (APB1) peripheral clock.
+ * @param RCC_APB1Periph: specifies the APB1 peripheral to gates its clock.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4,
+ * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7,
+ * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3,
+ * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4,
+ * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2,
+ * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP,
+ * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC,
+ * RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->APB1ENR |= RCC_APB1Periph;
+ }
+ else
+ {
+ RCC->APB1ENR &= ~RCC_APB1Periph;
+ }
+}
+
+#ifdef STM32F10X_CL
+/**
+ * @brief Forces or releases AHB peripheral reset.
+ * @note This function applies only to STM32 Connectivity line devices.
+ * @param RCC_AHBPeriph: specifies the AHB peripheral to reset.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_AHBPeriph_OTG_FS
+ * @arg RCC_AHBPeriph_ETH_MAC
+ * @param NewState: new state of the specified peripheral reset.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_AHB_PERIPH_RESET(RCC_AHBPeriph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ RCC->AHBRSTR |= RCC_AHBPeriph;
+ }
+ else
+ {
+ RCC->AHBRSTR &= ~RCC_AHBPeriph;
+ }
+}
+#endif /* STM32F10X_CL */
+
+/**
+ * @brief Forces or releases High Speed APB (APB2) peripheral reset.
+ * @param RCC_APB2Periph: specifies the APB2 peripheral to reset.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB,
+ * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE,
+ * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1,
+ * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1,
+ * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3,
+ * RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17,
+ * RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11
+ * @param NewState: new state of the specified peripheral reset.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->APB2RSTR |= RCC_APB2Periph;
+ }
+ else
+ {
+ RCC->APB2RSTR &= ~RCC_APB2Periph;
+ }
+}
+
+/**
+ * @brief Forces or releases Low Speed APB (APB1) peripheral reset.
+ * @param RCC_APB1Periph: specifies the APB1 peripheral to reset.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4,
+ * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7,
+ * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3,
+ * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4,
+ * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2,
+ * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP,
+ * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC,
+ * RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->APB1RSTR |= RCC_APB1Periph;
+ }
+ else
+ {
+ RCC->APB1RSTR &= ~RCC_APB1Periph;
+ }
+}
+
+/**
+ * @brief Forces or releases the Backup domain reset.
+ * @param NewState: new state of the Backup domain reset.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_BackupResetCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) BDCR_BDRST_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enables or disables the Clock Security System.
+ * @param NewState: new state of the Clock Security System..
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_ClockSecuritySystemCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_CSSON_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Selects the clock source to output on MCO pin.
+ * @param RCC_MCO: specifies the clock source to output.
+ *
+ * For @b STM32_Connectivity_line_devices, this parameter can be one of the
+ * following values:
+ * @arg RCC_MCO_NoClock: No clock selected
+ * @arg RCC_MCO_SYSCLK: System clock selected
+ * @arg RCC_MCO_HSI: HSI oscillator clock selected
+ * @arg RCC_MCO_HSE: HSE oscillator clock selected
+ * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected
+ * @arg RCC_MCO_PLL2CLK: PLL2 clock selected
+ * @arg RCC_MCO_PLL3CLK_Div2: PLL3 clock divided by 2 selected
+ * @arg RCC_MCO_XT1: External 3-25 MHz oscillator clock selected
+ * @arg RCC_MCO_PLL3CLK: PLL3 clock selected
+ *
+ * For @b other_STM32_devices, this parameter can be one of the following values:
+ * @arg RCC_MCO_NoClock: No clock selected
+ * @arg RCC_MCO_SYSCLK: System clock selected
+ * @arg RCC_MCO_HSI: HSI oscillator clock selected
+ * @arg RCC_MCO_HSE: HSE oscillator clock selected
+ * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected
+ *
+ * @retval None
+ */
+void RCC_MCOConfig(uint8_t RCC_MCO)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_MCO(RCC_MCO));
+
+ /* Perform Byte access to MCO bits to select the MCO source */
+ *(__IO uint8_t *) CFGR_BYTE4_ADDRESS = RCC_MCO;
+}
+
+/**
+ * @brief Checks whether the specified RCC flag is set or not.
+ * @param RCC_FLAG: specifies the flag to check.
+ *
+ * For @b STM32_Connectivity_line_devices, this parameter can be one of the
+ * following values:
+ * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready
+ * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready
+ * @arg RCC_FLAG_PLLRDY: PLL clock ready
+ * @arg RCC_FLAG_PLL2RDY: PLL2 clock ready
+ * @arg RCC_FLAG_PLL3RDY: PLL3 clock ready
+ * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready
+ * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready
+ * @arg RCC_FLAG_PINRST: Pin reset
+ * @arg RCC_FLAG_PORRST: POR/PDR reset
+ * @arg RCC_FLAG_SFTRST: Software reset
+ * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset
+ * @arg RCC_FLAG_WWDGRST: Window Watchdog reset
+ * @arg RCC_FLAG_LPWRRST: Low Power reset
+ *
+ * For @b other_STM32_devices, this parameter can be one of the following values:
+ * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready
+ * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready
+ * @arg RCC_FLAG_PLLRDY: PLL clock ready
+ * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready
+ * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready
+ * @arg RCC_FLAG_PINRST: Pin reset
+ * @arg RCC_FLAG_PORRST: POR/PDR reset
+ * @arg RCC_FLAG_SFTRST: Software reset
+ * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset
+ * @arg RCC_FLAG_WWDGRST: Window Watchdog reset
+ * @arg RCC_FLAG_LPWRRST: Low Power reset
+ *
+ * @retval The new state of RCC_FLAG (SET or RESET).
+ */
+FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG)
+{
+ uint32_t tmp = 0;
+ uint32_t statusreg = 0;
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_RCC_FLAG(RCC_FLAG));
+
+ /* Get the RCC register index */
+ tmp = RCC_FLAG >> 5;
+ if (tmp == 1) /* The flag to check is in CR register */
+ {
+ statusreg = RCC->CR;
+ }
+ else if (tmp == 2) /* The flag to check is in BDCR register */
+ {
+ statusreg = RCC->BDCR;
+ }
+ else /* The flag to check is in CSR register */
+ {
+ statusreg = RCC->CSR;
+ }
+
+ /* Get the flag position */
+ tmp = RCC_FLAG & FLAG_Mask;
+ if ((statusreg & ((uint32_t)1 << tmp)) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+
+ /* Return the flag status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the RCC reset flags.
+ * @note The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST,
+ * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST
+ * @param None
+ * @retval None
+ */
+void RCC_ClearFlag(void)
+{
+ /* Set RMVF bit to clear the reset flags */
+ RCC->CSR |= CSR_RMVF_Set;
+}
+
+/**
+ * @brief Checks whether the specified RCC interrupt has occurred or not.
+ * @param RCC_IT: specifies the RCC interrupt source to check.
+ *
+ * For @b STM32_Connectivity_line_devices, this parameter can be one of the
+ * following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt
+ * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt
+ * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ *
+ * For @b other_STM32_devices, this parameter can be one of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ *
+ * @retval The new state of RCC_IT (SET or RESET).
+ */
+ITStatus RCC_GetITStatus(uint8_t RCC_IT)
+{
+ ITStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_RCC_GET_IT(RCC_IT));
+
+ /* Check the status of the specified RCC interrupt */
+ if ((RCC->CIR & RCC_IT) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+
+ /* Return the RCC_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the RCC's interrupt pending bits.
+ * @param RCC_IT: specifies the interrupt pending bit to clear.
+ *
+ * For @b STM32_Connectivity_line_devices, this parameter can be any combination
+ * of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt
+ * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt
+ * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ *
+ * For @b other_STM32_devices, this parameter can be any combination of the
+ * following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt
+ *
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ * @retval None
+ */
+void RCC_ClearITPendingBit(uint8_t RCC_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_CLEAR_IT(RCC_IT));
+
+ /* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt
+ pending bits */
+ *(__IO uint8_t *) CIR_BYTE3_ADDRESS = RCC_IT;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_rtc.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_rtc.c
new file mode 100644
index 00000000..f798d2bd
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_rtc.c
@@ -0,0 +1,339 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_rtc.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the RTC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_rtc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup RTC
+ * @brief RTC driver modules
+ * @{
+ */
+
+/** @defgroup RTC_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Private_Defines
+ * @{
+ */
+#define RTC_LSB_MASK ((uint32_t)0x0000FFFF) /*!< RTC LSB Mask */
+#define PRLH_MSB_MASK ((uint32_t)0x000F0000) /*!< RTC Prescaler MSB Mask */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Enables or disables the specified RTC interrupts.
+ * @param RTC_IT: specifies the RTC interrupts sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_OW: Overflow interrupt
+ * @arg RTC_IT_ALR: Alarm interrupt
+ * @arg RTC_IT_SEC: Second interrupt
+ * @param NewState: new state of the specified RTC interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RTC_IT(RTC_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ RTC->CRH |= RTC_IT;
+ }
+ else
+ {
+ RTC->CRH &= (uint16_t)~RTC_IT;
+ }
+}
+
+/**
+ * @brief Enters the RTC configuration mode.
+ * @param None
+ * @retval None
+ */
+void RTC_EnterConfigMode(void)
+{
+ /* Set the CNF flag to enter in the Configuration Mode */
+ RTC->CRL |= RTC_CRL_CNF;
+}
+
+/**
+ * @brief Exits from the RTC configuration mode.
+ * @param None
+ * @retval None
+ */
+void RTC_ExitConfigMode(void)
+{
+ /* Reset the CNF flag to exit from the Configuration Mode */
+ RTC->CRL &= (uint16_t)~((uint16_t)RTC_CRL_CNF);
+}
+
+/**
+ * @brief Gets the RTC counter value.
+ * @param None
+ * @retval RTC counter value.
+ */
+uint32_t RTC_GetCounter(void)
+{
+ uint16_t tmp = 0;
+ tmp = RTC->CNTL;
+ return (((uint32_t)RTC->CNTH << 16 ) | tmp) ;
+}
+
+/**
+ * @brief Sets the RTC counter value.
+ * @param CounterValue: RTC counter new value.
+ * @retval None
+ */
+void RTC_SetCounter(uint32_t CounterValue)
+{
+ RTC_EnterConfigMode();
+ /* Set RTC COUNTER MSB word */
+ RTC->CNTH = CounterValue >> 16;
+ /* Set RTC COUNTER LSB word */
+ RTC->CNTL = (CounterValue & RTC_LSB_MASK);
+ RTC_ExitConfigMode();
+}
+
+/**
+ * @brief Sets the RTC prescaler value.
+ * @param PrescalerValue: RTC prescaler new value.
+ * @retval None
+ */
+void RTC_SetPrescaler(uint32_t PrescalerValue)
+{
+ /* Check the parameters */
+ assert_param(IS_RTC_PRESCALER(PrescalerValue));
+
+ RTC_EnterConfigMode();
+ /* Set RTC PRESCALER MSB word */
+ RTC->PRLH = (PrescalerValue & PRLH_MSB_MASK) >> 16;
+ /* Set RTC PRESCALER LSB word */
+ RTC->PRLL = (PrescalerValue & RTC_LSB_MASK);
+ RTC_ExitConfigMode();
+}
+
+/**
+ * @brief Sets the RTC alarm value.
+ * @param AlarmValue: RTC alarm new value.
+ * @retval None
+ */
+void RTC_SetAlarm(uint32_t AlarmValue)
+{
+ RTC_EnterConfigMode();
+ /* Set the ALARM MSB word */
+ RTC->ALRH = AlarmValue >> 16;
+ /* Set the ALARM LSB word */
+ RTC->ALRL = (AlarmValue & RTC_LSB_MASK);
+ RTC_ExitConfigMode();
+}
+
+/**
+ * @brief Gets the RTC divider value.
+ * @param None
+ * @retval RTC Divider value.
+ */
+uint32_t RTC_GetDivider(void)
+{
+ uint32_t tmp = 0x00;
+ tmp = ((uint32_t)RTC->DIVH & (uint32_t)0x000F) << 16;
+ tmp |= RTC->DIVL;
+ return tmp;
+}
+
+/**
+ * @brief Waits until last write operation on RTC registers has finished.
+ * @note This function must be called before any write to RTC registers.
+ * @param None
+ * @retval None
+ */
+void RTC_WaitForLastTask(void)
+{
+ /* Loop until RTOFF flag is set */
+ while ((RTC->CRL & RTC_FLAG_RTOFF) == (uint16_t)RESET)
+ {
+ }
+}
+
+/**
+ * @brief Waits until the RTC registers (RTC_CNT, RTC_ALR and RTC_PRL)
+ * are synchronized with RTC APB clock.
+ * @note This function must be called before any read operation after an APB reset
+ * or an APB clock stop.
+ * @param None
+ * @retval None
+ */
+void RTC_WaitForSynchro(void)
+{
+ /* Clear RSF flag */
+ RTC->CRL &= (uint16_t)~RTC_FLAG_RSF;
+ /* Loop until RSF flag is set */
+ while ((RTC->CRL & RTC_FLAG_RSF) == (uint16_t)RESET)
+ {
+ }
+}
+
+/**
+ * @brief Checks whether the specified RTC flag is set or not.
+ * @param RTC_FLAG: specifies the flag to check.
+ * This parameter can be one the following values:
+ * @arg RTC_FLAG_RTOFF: RTC Operation OFF flag
+ * @arg RTC_FLAG_RSF: Registers Synchronized flag
+ * @arg RTC_FLAG_OW: Overflow flag
+ * @arg RTC_FLAG_ALR: Alarm flag
+ * @arg RTC_FLAG_SEC: Second flag
+ * @retval The new state of RTC_FLAG (SET or RESET).
+ */
+FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_GET_FLAG(RTC_FLAG));
+
+ if ((RTC->CRL & RTC_FLAG) != (uint16_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the RTC's pending flags.
+ * @param RTC_FLAG: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_FLAG_RSF: Registers Synchronized flag. This flag is cleared only after
+ * an APB reset or an APB Clock stop.
+ * @arg RTC_FLAG_OW: Overflow flag
+ * @arg RTC_FLAG_ALR: Alarm flag
+ * @arg RTC_FLAG_SEC: Second flag
+ * @retval None
+ */
+void RTC_ClearFlag(uint16_t RTC_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_RTC_CLEAR_FLAG(RTC_FLAG));
+
+ /* Clear the corresponding RTC flag */
+ RTC->CRL &= (uint16_t)~RTC_FLAG;
+}
+
+/**
+ * @brief Checks whether the specified RTC interrupt has occurred or not.
+ * @param RTC_IT: specifies the RTC interrupts sources to check.
+ * This parameter can be one of the following values:
+ * @arg RTC_IT_OW: Overflow interrupt
+ * @arg RTC_IT_ALR: Alarm interrupt
+ * @arg RTC_IT_SEC: Second interrupt
+ * @retval The new state of the RTC_IT (SET or RESET).
+ */
+ITStatus RTC_GetITStatus(uint16_t RTC_IT)
+{
+ ITStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_RTC_GET_IT(RTC_IT));
+
+ bitstatus = (ITStatus)(RTC->CRL & RTC_IT);
+ if (((RTC->CRH & RTC_IT) != (uint16_t)RESET) && (bitstatus != (uint16_t)RESET))
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the RTC's interrupt pending bits.
+ * @param RTC_IT: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_OW: Overflow interrupt
+ * @arg RTC_IT_ALR: Alarm interrupt
+ * @arg RTC_IT_SEC: Second interrupt
+ * @retval None
+ */
+void RTC_ClearITPendingBit(uint16_t RTC_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_RTC_IT(RTC_IT));
+
+ /* Clear the corresponding RTC pending bit */
+ RTC->CRL &= (uint16_t)~RTC_IT;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_sdio.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_sdio.c
new file mode 100644
index 00000000..d1870cef
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_sdio.c
@@ -0,0 +1,799 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_sdio.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the SDIO firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_sdio.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup SDIO
+ * @brief SDIO driver modules
+ * @{
+ */
+
+/** @defgroup SDIO_Private_TypesDefinitions
+ * @{
+ */
+
+/* ------------ SDIO registers bit address in the alias region ----------- */
+#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE)
+
+/* --- CLKCR Register ---*/
+
+/* Alias word address of CLKEN bit */
+#define CLKCR_OFFSET (SDIO_OFFSET + 0x04)
+#define CLKEN_BitNumber 0x08
+#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BitNumber * 4))
+
+/* --- CMD Register ---*/
+
+/* Alias word address of SDIOSUSPEND bit */
+#define CMD_OFFSET (SDIO_OFFSET + 0x0C)
+#define SDIOSUSPEND_BitNumber 0x0B
+#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BitNumber * 4))
+
+/* Alias word address of ENCMDCOMPL bit */
+#define ENCMDCOMPL_BitNumber 0x0C
+#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BitNumber * 4))
+
+/* Alias word address of NIEN bit */
+#define NIEN_BitNumber 0x0D
+#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BitNumber * 4))
+
+/* Alias word address of ATACMD bit */
+#define ATACMD_BitNumber 0x0E
+#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BitNumber * 4))
+
+/* --- DCTRL Register ---*/
+
+/* Alias word address of DMAEN bit */
+#define DCTRL_OFFSET (SDIO_OFFSET + 0x2C)
+#define DMAEN_BitNumber 0x03
+#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BitNumber * 4))
+
+/* Alias word address of RWSTART bit */
+#define RWSTART_BitNumber 0x08
+#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BitNumber * 4))
+
+/* Alias word address of RWSTOP bit */
+#define RWSTOP_BitNumber 0x09
+#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BitNumber * 4))
+
+/* Alias word address of RWMOD bit */
+#define RWMOD_BitNumber 0x0A
+#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BitNumber * 4))
+
+/* Alias word address of SDIOEN bit */
+#define SDIOEN_BitNumber 0x0B
+#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BitNumber * 4))
+
+/* ---------------------- SDIO registers bit mask ------------------------ */
+
+/* --- CLKCR Register ---*/
+
+/* CLKCR register clear mask */
+#define CLKCR_CLEAR_MASK ((uint32_t)0xFFFF8100)
+
+/* --- PWRCTRL Register ---*/
+
+/* SDIO PWRCTRL Mask */
+#define PWR_PWRCTRL_MASK ((uint32_t)0xFFFFFFFC)
+
+/* --- DCTRL Register ---*/
+
+/* SDIO DCTRL Clear Mask */
+#define DCTRL_CLEAR_MASK ((uint32_t)0xFFFFFF08)
+
+/* --- CMD Register ---*/
+
+/* CMD Register clear mask */
+#define CMD_CLEAR_MASK ((uint32_t)0xFFFFF800)
+
+/* SDIO RESP Registers Address */
+#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14))
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the SDIO peripheral registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void SDIO_DeInit(void)
+{
+ SDIO->POWER = 0x00000000;
+ SDIO->CLKCR = 0x00000000;
+ SDIO->ARG = 0x00000000;
+ SDIO->CMD = 0x00000000;
+ SDIO->DTIMER = 0x00000000;
+ SDIO->DLEN = 0x00000000;
+ SDIO->DCTRL = 0x00000000;
+ SDIO->ICR = 0x00C007FF;
+ SDIO->MASK = 0x00000000;
+}
+
+/**
+ * @brief Initializes the SDIO peripheral according to the specified
+ * parameters in the SDIO_InitStruct.
+ * @param SDIO_InitStruct : pointer to a SDIO_InitTypeDef structure
+ * that contains the configuration information for the SDIO peripheral.
+ * @retval None
+ */
+void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_CLOCK_EDGE(SDIO_InitStruct->SDIO_ClockEdge));
+ assert_param(IS_SDIO_CLOCK_BYPASS(SDIO_InitStruct->SDIO_ClockBypass));
+ assert_param(IS_SDIO_CLOCK_POWER_SAVE(SDIO_InitStruct->SDIO_ClockPowerSave));
+ assert_param(IS_SDIO_BUS_WIDE(SDIO_InitStruct->SDIO_BusWide));
+ assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(SDIO_InitStruct->SDIO_HardwareFlowControl));
+
+/*---------------------------- SDIO CLKCR Configuration ------------------------*/
+ /* Get the SDIO CLKCR value */
+ tmpreg = SDIO->CLKCR;
+
+ /* Clear CLKDIV, PWRSAV, BYPASS, WIDBUS, NEGEDGE, HWFC_EN bits */
+ tmpreg &= CLKCR_CLEAR_MASK;
+
+ /* Set CLKDIV bits according to SDIO_ClockDiv value */
+ /* Set PWRSAV bit according to SDIO_ClockPowerSave value */
+ /* Set BYPASS bit according to SDIO_ClockBypass value */
+ /* Set WIDBUS bits according to SDIO_BusWide value */
+ /* Set NEGEDGE bits according to SDIO_ClockEdge value */
+ /* Set HWFC_EN bits according to SDIO_HardwareFlowControl value */
+ tmpreg |= (SDIO_InitStruct->SDIO_ClockDiv | SDIO_InitStruct->SDIO_ClockPowerSave |
+ SDIO_InitStruct->SDIO_ClockBypass | SDIO_InitStruct->SDIO_BusWide |
+ SDIO_InitStruct->SDIO_ClockEdge | SDIO_InitStruct->SDIO_HardwareFlowControl);
+
+ /* Write to SDIO CLKCR */
+ SDIO->CLKCR = tmpreg;
+}
+
+/**
+ * @brief Fills each SDIO_InitStruct member with its default value.
+ * @param SDIO_InitStruct: pointer to an SDIO_InitTypeDef structure which
+ * will be initialized.
+ * @retval None
+ */
+void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct)
+{
+ /* SDIO_InitStruct members default value */
+ SDIO_InitStruct->SDIO_ClockDiv = 0x00;
+ SDIO_InitStruct->SDIO_ClockEdge = SDIO_ClockEdge_Rising;
+ SDIO_InitStruct->SDIO_ClockBypass = SDIO_ClockBypass_Disable;
+ SDIO_InitStruct->SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable;
+ SDIO_InitStruct->SDIO_BusWide = SDIO_BusWide_1b;
+ SDIO_InitStruct->SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable;
+}
+
+/**
+ * @brief Enables or disables the SDIO Clock.
+ * @param NewState: new state of the SDIO Clock. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_ClockCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CLKCR_CLKEN_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Sets the power status of the controller.
+ * @param SDIO_PowerState: new state of the Power state.
+ * This parameter can be one of the following values:
+ * @arg SDIO_PowerState_OFF
+ * @arg SDIO_PowerState_ON
+ * @retval None
+ */
+void SDIO_SetPowerState(uint32_t SDIO_PowerState)
+{
+ /* Check the parameters */
+ assert_param(IS_SDIO_POWER_STATE(SDIO_PowerState));
+
+ SDIO->POWER &= PWR_PWRCTRL_MASK;
+ SDIO->POWER |= SDIO_PowerState;
+}
+
+/**
+ * @brief Gets the power status of the controller.
+ * @param None
+ * @retval Power status of the controller. The returned value can
+ * be one of the following:
+ * - 0x00: Power OFF
+ * - 0x02: Power UP
+ * - 0x03: Power ON
+ */
+uint32_t SDIO_GetPowerState(void)
+{
+ return (SDIO->POWER & (~PWR_PWRCTRL_MASK));
+}
+
+/**
+ * @brief Enables or disables the SDIO interrupts.
+ * @param SDIO_IT: specifies the SDIO interrupt sources to be enabled or disabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @param NewState: new state of the specified SDIO interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_SDIO_IT(SDIO_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the SDIO interrupts */
+ SDIO->MASK |= SDIO_IT;
+ }
+ else
+ {
+ /* Disable the SDIO interrupts */
+ SDIO->MASK &= ~SDIO_IT;
+ }
+}
+
+/**
+ * @brief Enables or disables the SDIO DMA request.
+ * @param NewState: new state of the selected SDIO DMA request.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_DMACmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) DCTRL_DMAEN_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Initializes the SDIO Command according to the specified
+ * parameters in the SDIO_CmdInitStruct and send the command.
+ * @param SDIO_CmdInitStruct : pointer to a SDIO_CmdInitTypeDef
+ * structure that contains the configuration information for the SDIO command.
+ * @retval None
+ */
+void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->SDIO_CmdIndex));
+ assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->SDIO_Response));
+ assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->SDIO_Wait));
+ assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->SDIO_CPSM));
+
+/*---------------------------- SDIO ARG Configuration ------------------------*/
+ /* Set the SDIO Argument value */
+ SDIO->ARG = SDIO_CmdInitStruct->SDIO_Argument;
+
+/*---------------------------- SDIO CMD Configuration ------------------------*/
+ /* Get the SDIO CMD value */
+ tmpreg = SDIO->CMD;
+ /* Clear CMDINDEX, WAITRESP, WAITINT, WAITPEND, CPSMEN bits */
+ tmpreg &= CMD_CLEAR_MASK;
+ /* Set CMDINDEX bits according to SDIO_CmdIndex value */
+ /* Set WAITRESP bits according to SDIO_Response value */
+ /* Set WAITINT and WAITPEND bits according to SDIO_Wait value */
+ /* Set CPSMEN bits according to SDIO_CPSM value */
+ tmpreg |= (uint32_t)SDIO_CmdInitStruct->SDIO_CmdIndex | SDIO_CmdInitStruct->SDIO_Response
+ | SDIO_CmdInitStruct->SDIO_Wait | SDIO_CmdInitStruct->SDIO_CPSM;
+
+ /* Write to SDIO CMD */
+ SDIO->CMD = tmpreg;
+}
+
+/**
+ * @brief Fills each SDIO_CmdInitStruct member with its default value.
+ * @param SDIO_CmdInitStruct: pointer to an SDIO_CmdInitTypeDef
+ * structure which will be initialized.
+ * @retval None
+ */
+void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct)
+{
+ /* SDIO_CmdInitStruct members default value */
+ SDIO_CmdInitStruct->SDIO_Argument = 0x00;
+ SDIO_CmdInitStruct->SDIO_CmdIndex = 0x00;
+ SDIO_CmdInitStruct->SDIO_Response = SDIO_Response_No;
+ SDIO_CmdInitStruct->SDIO_Wait = SDIO_Wait_No;
+ SDIO_CmdInitStruct->SDIO_CPSM = SDIO_CPSM_Disable;
+}
+
+/**
+ * @brief Returns command index of last command for which response received.
+ * @param None
+ * @retval Returns the command index of the last command response received.
+ */
+uint8_t SDIO_GetCommandResponse(void)
+{
+ return (uint8_t)(SDIO->RESPCMD);
+}
+
+/**
+ * @brief Returns response received from the card for the last command.
+ * @param SDIO_RESP: Specifies the SDIO response register.
+ * This parameter can be one of the following values:
+ * @arg SDIO_RESP1: Response Register 1
+ * @arg SDIO_RESP2: Response Register 2
+ * @arg SDIO_RESP3: Response Register 3
+ * @arg SDIO_RESP4: Response Register 4
+ * @retval The Corresponding response register value.
+ */
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_RESP(SDIO_RESP));
+
+ tmp = SDIO_RESP_ADDR + SDIO_RESP;
+
+ return (*(__IO uint32_t *) tmp);
+}
+
+/**
+ * @brief Initializes the SDIO data path according to the specified
+ * parameters in the SDIO_DataInitStruct.
+ * @param SDIO_DataInitStruct : pointer to a SDIO_DataInitTypeDef structure that
+ * contains the configuration information for the SDIO command.
+ * @retval None
+ */
+void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_DATA_LENGTH(SDIO_DataInitStruct->SDIO_DataLength));
+ assert_param(IS_SDIO_BLOCK_SIZE(SDIO_DataInitStruct->SDIO_DataBlockSize));
+ assert_param(IS_SDIO_TRANSFER_DIR(SDIO_DataInitStruct->SDIO_TransferDir));
+ assert_param(IS_SDIO_TRANSFER_MODE(SDIO_DataInitStruct->SDIO_TransferMode));
+ assert_param(IS_SDIO_DPSM(SDIO_DataInitStruct->SDIO_DPSM));
+
+/*---------------------------- SDIO DTIMER Configuration ---------------------*/
+ /* Set the SDIO Data TimeOut value */
+ SDIO->DTIMER = SDIO_DataInitStruct->SDIO_DataTimeOut;
+
+/*---------------------------- SDIO DLEN Configuration -----------------------*/
+ /* Set the SDIO DataLength value */
+ SDIO->DLEN = SDIO_DataInitStruct->SDIO_DataLength;
+
+/*---------------------------- SDIO DCTRL Configuration ----------------------*/
+ /* Get the SDIO DCTRL value */
+ tmpreg = SDIO->DCTRL;
+ /* Clear DEN, DTMODE, DTDIR and DBCKSIZE bits */
+ tmpreg &= DCTRL_CLEAR_MASK;
+ /* Set DEN bit according to SDIO_DPSM value */
+ /* Set DTMODE bit according to SDIO_TransferMode value */
+ /* Set DTDIR bit according to SDIO_TransferDir value */
+ /* Set DBCKSIZE bits according to SDIO_DataBlockSize value */
+ tmpreg |= (uint32_t)SDIO_DataInitStruct->SDIO_DataBlockSize | SDIO_DataInitStruct->SDIO_TransferDir
+ | SDIO_DataInitStruct->SDIO_TransferMode | SDIO_DataInitStruct->SDIO_DPSM;
+
+ /* Write to SDIO DCTRL */
+ SDIO->DCTRL = tmpreg;
+}
+
+/**
+ * @brief Fills each SDIO_DataInitStruct member with its default value.
+ * @param SDIO_DataInitStruct: pointer to an SDIO_DataInitTypeDef structure which
+ * will be initialized.
+ * @retval None
+ */
+void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct)
+{
+ /* SDIO_DataInitStruct members default value */
+ SDIO_DataInitStruct->SDIO_DataTimeOut = 0xFFFFFFFF;
+ SDIO_DataInitStruct->SDIO_DataLength = 0x00;
+ SDIO_DataInitStruct->SDIO_DataBlockSize = SDIO_DataBlockSize_1b;
+ SDIO_DataInitStruct->SDIO_TransferDir = SDIO_TransferDir_ToCard;
+ SDIO_DataInitStruct->SDIO_TransferMode = SDIO_TransferMode_Block;
+ SDIO_DataInitStruct->SDIO_DPSM = SDIO_DPSM_Disable;
+}
+
+/**
+ * @brief Returns number of remaining data bytes to be transferred.
+ * @param None
+ * @retval Number of remaining data bytes to be transferred
+ */
+uint32_t SDIO_GetDataCounter(void)
+{
+ return SDIO->DCOUNT;
+}
+
+/**
+ * @brief Read one data word from Rx FIFO.
+ * @param None
+ * @retval Data received
+ */
+uint32_t SDIO_ReadData(void)
+{
+ return SDIO->FIFO;
+}
+
+/**
+ * @brief Write one data word to Tx FIFO.
+ * @param Data: 32-bit data word to write.
+ * @retval None
+ */
+void SDIO_WriteData(uint32_t Data)
+{
+ SDIO->FIFO = Data;
+}
+
+/**
+ * @brief Returns the number of words left to be written to or read from FIFO.
+ * @param None
+ * @retval Remaining number of words.
+ */
+uint32_t SDIO_GetFIFOCount(void)
+{
+ return SDIO->FIFOCNT;
+}
+
+/**
+ * @brief Starts the SD I/O Read Wait operation.
+ * @param NewState: new state of the Start SDIO Read Wait operation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_StartSDIOReadWait(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) DCTRL_RWSTART_BB = (uint32_t) NewState;
+}
+
+/**
+ * @brief Stops the SD I/O Read Wait operation.
+ * @param NewState: new state of the Stop SDIO Read Wait operation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_StopSDIOReadWait(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) DCTRL_RWSTOP_BB = (uint32_t) NewState;
+}
+
+/**
+ * @brief Sets one of the two options of inserting read wait interval.
+ * @param SDIO_ReadWaitMode: SD I/O Read Wait operation mode.
+ * This parameter can be:
+ * @arg SDIO_ReadWaitMode_CLK: Read Wait control by stopping SDIOCLK
+ * @arg SDIO_ReadWaitMode_DATA2: Read Wait control using SDIO_DATA2
+ * @retval None
+ */
+void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode)
+{
+ /* Check the parameters */
+ assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode));
+
+ *(__IO uint32_t *) DCTRL_RWMOD_BB = SDIO_ReadWaitMode;
+}
+
+/**
+ * @brief Enables or disables the SD I/O Mode Operation.
+ * @param NewState: new state of SDIO specific operation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_SetSDIOOperation(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) DCTRL_SDIOEN_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enables or disables the SD I/O Mode suspend command sending.
+ * @param NewState: new state of the SD I/O Mode suspend command.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_SendSDIOSuspendCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CMD_SDIOSUSPEND_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enables or disables the command completion signal.
+ * @param NewState: new state of command completion signal.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_CommandCompletionCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CMD_ENCMDCOMPL_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enables or disables the CE-ATA interrupt.
+ * @param NewState: new state of CE-ATA interrupt. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_CEATAITCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)((~((uint32_t)NewState)) & ((uint32_t)0x1));
+}
+
+/**
+ * @brief Sends CE-ATA command (CMD61).
+ * @param NewState: new state of CE-ATA command. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_SendCEATACmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CMD_ATACMD_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Checks whether the specified SDIO flag is set or not.
+ * @param SDIO_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode.
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_CMDACT: Command transfer in progress
+ * @arg SDIO_FLAG_TXACT: Data transmit in progress
+ * @arg SDIO_FLAG_RXACT: Data receive in progress
+ * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+ * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
+ * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
+ * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
+ * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
+ * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
+ * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
+ * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval The new state of SDIO_FLAG (SET or RESET).
+ */
+FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_FLAG(SDIO_FLAG));
+
+ if ((SDIO->STA & SDIO_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the SDIO's pending flags.
+ * @param SDIO_FLAG: specifies the flag to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+void SDIO_ClearFlag(uint32_t SDIO_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_SDIO_CLEAR_FLAG(SDIO_FLAG));
+
+ SDIO->ICR = SDIO_FLAG;
+}
+
+/**
+ * @brief Checks whether the specified SDIO interrupt has occurred or not.
+ * @param SDIO_IT: specifies the SDIO interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval The new state of SDIO_IT (SET or RESET).
+ */
+ITStatus SDIO_GetITStatus(uint32_t SDIO_IT)
+{
+ ITStatus bitstatus = RESET;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_GET_IT(SDIO_IT));
+ if ((SDIO->STA & SDIO_IT) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the SDIO's interrupt pending bits.
+ * @param SDIO_IT: specifies the interrupt pending bit to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+void SDIO_ClearITPendingBit(uint32_t SDIO_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_SDIO_CLEAR_IT(SDIO_IT));
+
+ SDIO->ICR = SDIO_IT;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_spi.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_spi.c
new file mode 100644
index 00000000..51a9cce7
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_spi.c
@@ -0,0 +1,908 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_spi.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the SPI firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_spi.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup SPI
+ * @brief SPI driver modules
+ * @{
+ */
+
+/** @defgroup SPI_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup SPI_Private_Defines
+ * @{
+ */
+
+/* SPI SPE mask */
+#define CR1_SPE_Set ((uint16_t)0x0040)
+#define CR1_SPE_Reset ((uint16_t)0xFFBF)
+
+/* I2S I2SE mask */
+#define I2SCFGR_I2SE_Set ((uint16_t)0x0400)
+#define I2SCFGR_I2SE_Reset ((uint16_t)0xFBFF)
+
+/* SPI CRCNext mask */
+#define CR1_CRCNext_Set ((uint16_t)0x1000)
+
+/* SPI CRCEN mask */
+#define CR1_CRCEN_Set ((uint16_t)0x2000)
+#define CR1_CRCEN_Reset ((uint16_t)0xDFFF)
+
+/* SPI SSOE mask */
+#define CR2_SSOE_Set ((uint16_t)0x0004)
+#define CR2_SSOE_Reset ((uint16_t)0xFFFB)
+
+/* SPI registers Masks */
+#define CR1_CLEAR_Mask ((uint16_t)0x3040)
+#define I2SCFGR_CLEAR_Mask ((uint16_t)0xF040)
+
+/* SPI or I2S mode selection masks */
+#define SPI_Mode_Select ((uint16_t)0xF7FF)
+#define I2S_Mode_Select ((uint16_t)0x0800)
+
+/* I2S clock source selection masks */
+#define I2S2_CLOCK_SRC ((uint32_t)(0x00020000))
+#define I2S3_CLOCK_SRC ((uint32_t)(0x00040000))
+#define I2S_MUL_MASK ((uint32_t)(0x0000F000))
+#define I2S_DIV_MASK ((uint32_t)(0x000000F0))
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the SPIx peripheral registers to their default
+ * reset values (Affects also the I2Ss).
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @retval None
+ */
+void SPI_I2S_DeInit(SPI_TypeDef* SPIx)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+
+ if (SPIx == SPI1)
+ {
+ /* Enable SPI1 reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, ENABLE);
+ /* Release SPI1 from reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, DISABLE);
+ }
+ else if (SPIx == SPI2)
+ {
+ /* Enable SPI2 reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, ENABLE);
+ /* Release SPI2 from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, DISABLE);
+ }
+ else
+ {
+ if (SPIx == SPI3)
+ {
+ /* Enable SPI3 reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE);
+ /* Release SPI3 from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, DISABLE);
+ }
+ }
+}
+
+/**
+ * @brief Initializes the SPIx peripheral according to the specified
+ * parameters in the SPI_InitStruct.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param SPI_InitStruct: pointer to a SPI_InitTypeDef structure that
+ * contains the configuration information for the specified SPI peripheral.
+ * @retval None
+ */
+void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct)
+{
+ uint16_t tmpreg = 0;
+
+ /* check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+
+ /* Check the SPI parameters */
+ assert_param(IS_SPI_DIRECTION_MODE(SPI_InitStruct->SPI_Direction));
+ assert_param(IS_SPI_MODE(SPI_InitStruct->SPI_Mode));
+ assert_param(IS_SPI_DATASIZE(SPI_InitStruct->SPI_DataSize));
+ assert_param(IS_SPI_CPOL(SPI_InitStruct->SPI_CPOL));
+ assert_param(IS_SPI_CPHA(SPI_InitStruct->SPI_CPHA));
+ assert_param(IS_SPI_NSS(SPI_InitStruct->SPI_NSS));
+ assert_param(IS_SPI_BAUDRATE_PRESCALER(SPI_InitStruct->SPI_BaudRatePrescaler));
+ assert_param(IS_SPI_FIRST_BIT(SPI_InitStruct->SPI_FirstBit));
+ assert_param(IS_SPI_CRC_POLYNOMIAL(SPI_InitStruct->SPI_CRCPolynomial));
+
+/*---------------------------- SPIx CR1 Configuration ------------------------*/
+ /* Get the SPIx CR1 value */
+ tmpreg = SPIx->CR1;
+ /* Clear BIDIMode, BIDIOE, RxONLY, SSM, SSI, LSBFirst, BR, MSTR, CPOL and CPHA bits */
+ tmpreg &= CR1_CLEAR_Mask;
+ /* Configure SPIx: direction, NSS management, first transmitted bit, BaudRate prescaler
+ master/salve mode, CPOL and CPHA */
+ /* Set BIDImode, BIDIOE and RxONLY bits according to SPI_Direction value */
+ /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */
+ /* Set LSBFirst bit according to SPI_FirstBit value */
+ /* Set BR bits according to SPI_BaudRatePrescaler value */
+ /* Set CPOL bit according to SPI_CPOL value */
+ /* Set CPHA bit according to SPI_CPHA value */
+ tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode |
+ SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL |
+ SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS |
+ SPI_InitStruct->SPI_BaudRatePrescaler | SPI_InitStruct->SPI_FirstBit);
+ /* Write to SPIx CR1 */
+ SPIx->CR1 = tmpreg;
+
+ /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */
+ SPIx->I2SCFGR &= SPI_Mode_Select;
+
+/*---------------------------- SPIx CRCPOLY Configuration --------------------*/
+ /* Write to SPIx CRCPOLY */
+ SPIx->CRCPR = SPI_InitStruct->SPI_CRCPolynomial;
+}
+
+/**
+ * @brief Initializes the SPIx peripheral according to the specified
+ * parameters in the I2S_InitStruct.
+ * @param SPIx: where x can be 2 or 3 to select the SPI peripheral
+ * (configured in I2S mode).
+ * @param I2S_InitStruct: pointer to an I2S_InitTypeDef structure that
+ * contains the configuration information for the specified SPI peripheral
+ * configured in I2S mode.
+ * @note
+ * The function calculates the optimal prescaler needed to obtain the most
+ * accurate audio frequency (depending on the I2S clock source, the PLL values
+ * and the product configuration). But in case the prescaler value is greater
+ * than 511, the default value (0x02) will be configured instead. *
+ * @retval None
+ */
+void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct)
+{
+ uint16_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1;
+ uint32_t tmp = 0;
+ RCC_ClocksTypeDef RCC_Clocks;
+ uint32_t sourceclock = 0;
+
+ /* Check the I2S parameters */
+ assert_param(IS_SPI_23_PERIPH(SPIx));
+ assert_param(IS_I2S_MODE(I2S_InitStruct->I2S_Mode));
+ assert_param(IS_I2S_STANDARD(I2S_InitStruct->I2S_Standard));
+ assert_param(IS_I2S_DATA_FORMAT(I2S_InitStruct->I2S_DataFormat));
+ assert_param(IS_I2S_MCLK_OUTPUT(I2S_InitStruct->I2S_MCLKOutput));
+ assert_param(IS_I2S_AUDIO_FREQ(I2S_InitStruct->I2S_AudioFreq));
+ assert_param(IS_I2S_CPOL(I2S_InitStruct->I2S_CPOL));
+
+/*----------------------- SPIx I2SCFGR & I2SPR Configuration -----------------*/
+ /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
+ SPIx->I2SCFGR &= I2SCFGR_CLEAR_Mask;
+ SPIx->I2SPR = 0x0002;
+
+ /* Get the I2SCFGR register value */
+ tmpreg = SPIx->I2SCFGR;
+
+ /* If the default value has to be written, reinitialize i2sdiv and i2sodd*/
+ if(I2S_InitStruct->I2S_AudioFreq == I2S_AudioFreq_Default)
+ {
+ i2sodd = (uint16_t)0;
+ i2sdiv = (uint16_t)2;
+ }
+ /* If the requested audio frequency is not the default, compute the prescaler */
+ else
+ {
+ /* Check the frame length (For the Prescaler computing) */
+ if(I2S_InitStruct->I2S_DataFormat == I2S_DataFormat_16b)
+ {
+ /* Packet length is 16 bits */
+ packetlength = 1;
+ }
+ else
+ {
+ /* Packet length is 32 bits */
+ packetlength = 2;
+ }
+
+ /* Get the I2S clock source mask depending on the peripheral number */
+ if(((uint32_t)SPIx) == SPI2_BASE)
+ {
+ /* The mask is relative to I2S2 */
+ tmp = I2S2_CLOCK_SRC;
+ }
+ else
+ {
+ /* The mask is relative to I2S3 */
+ tmp = I2S3_CLOCK_SRC;
+ }
+
+ /* Check the I2S clock source configuration depending on the Device:
+ Only Connectivity line devices have the PLL3 VCO clock */
+#ifdef STM32F10X_CL
+ if((RCC->CFGR2 & tmp) != 0)
+ {
+ /* Get the configuration bits of RCC PLL3 multiplier */
+ tmp = (uint32_t)((RCC->CFGR2 & I2S_MUL_MASK) >> 12);
+
+ /* Get the value of the PLL3 multiplier */
+ if((tmp > 5) && (tmp < 15))
+ {
+ /* Multiplier is between 8 and 14 (value 15 is forbidden) */
+ tmp += 2;
+ }
+ else
+ {
+ if (tmp == 15)
+ {
+ /* Multiplier is 20 */
+ tmp = 20;
+ }
+ }
+ /* Get the PREDIV2 value */
+ sourceclock = (uint32_t)(((RCC->CFGR2 & I2S_DIV_MASK) >> 4) + 1);
+
+ /* Calculate the Source Clock frequency based on PLL3 and PREDIV2 values */
+ sourceclock = (uint32_t) ((HSE_Value / sourceclock) * tmp * 2);
+ }
+ else
+ {
+ /* I2S Clock source is System clock: Get System Clock frequency */
+ RCC_GetClocksFreq(&RCC_Clocks);
+
+ /* Get the source clock value: based on System Clock value */
+ sourceclock = RCC_Clocks.SYSCLK_Frequency;
+ }
+#else /* STM32F10X_HD */
+ /* I2S Clock source is System clock: Get System Clock frequency */
+ RCC_GetClocksFreq(&RCC_Clocks);
+
+ /* Get the source clock value: based on System Clock value */
+ sourceclock = RCC_Clocks.SYSCLK_Frequency;
+#endif /* STM32F10X_CL */
+
+ /* Compute the Real divider depending on the MCLK output state with a floating point */
+ if(I2S_InitStruct->I2S_MCLKOutput == I2S_MCLKOutput_Enable)
+ {
+ /* MCLK output is enabled */
+ tmp = (uint16_t)(((((sourceclock / 256) * 10) / I2S_InitStruct->I2S_AudioFreq)) + 5);
+ }
+ else
+ {
+ /* MCLK output is disabled */
+ tmp = (uint16_t)(((((sourceclock / (32 * packetlength)) *10 ) / I2S_InitStruct->I2S_AudioFreq)) + 5);
+ }
+
+ /* Remove the floating point */
+ tmp = tmp / 10;
+
+ /* Check the parity of the divider */
+ i2sodd = (uint16_t)(tmp & (uint16_t)0x0001);
+
+ /* Compute the i2sdiv prescaler */
+ i2sdiv = (uint16_t)((tmp - i2sodd) / 2);
+
+ /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */
+ i2sodd = (uint16_t) (i2sodd << 8);
+ }
+
+ /* Test if the divider is 1 or 0 or greater than 0xFF */
+ if ((i2sdiv < 2) || (i2sdiv > 0xFF))
+ {
+ /* Set the default values */
+ i2sdiv = 2;
+ i2sodd = 0;
+ }
+
+ /* Write to SPIx I2SPR register the computed value */
+ SPIx->I2SPR = (uint16_t)(i2sdiv | (uint16_t)(i2sodd | (uint16_t)I2S_InitStruct->I2S_MCLKOutput));
+
+ /* Configure the I2S with the SPI_InitStruct values */
+ tmpreg |= (uint16_t)(I2S_Mode_Select | (uint16_t)(I2S_InitStruct->I2S_Mode | \
+ (uint16_t)(I2S_InitStruct->I2S_Standard | (uint16_t)(I2S_InitStruct->I2S_DataFormat | \
+ (uint16_t)I2S_InitStruct->I2S_CPOL))));
+
+ /* Write to SPIx I2SCFGR */
+ SPIx->I2SCFGR = tmpreg;
+}
+
+/**
+ * @brief Fills each SPI_InitStruct member with its default value.
+ * @param SPI_InitStruct : pointer to a SPI_InitTypeDef structure which will be initialized.
+ * @retval None
+ */
+void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct)
+{
+/*--------------- Reset SPI init structure parameters values -----------------*/
+ /* Initialize the SPI_Direction member */
+ SPI_InitStruct->SPI_Direction = SPI_Direction_2Lines_FullDuplex;
+ /* initialize the SPI_Mode member */
+ SPI_InitStruct->SPI_Mode = SPI_Mode_Slave;
+ /* initialize the SPI_DataSize member */
+ SPI_InitStruct->SPI_DataSize = SPI_DataSize_8b;
+ /* Initialize the SPI_CPOL member */
+ SPI_InitStruct->SPI_CPOL = SPI_CPOL_Low;
+ /* Initialize the SPI_CPHA member */
+ SPI_InitStruct->SPI_CPHA = SPI_CPHA_1Edge;
+ /* Initialize the SPI_NSS member */
+ SPI_InitStruct->SPI_NSS = SPI_NSS_Hard;
+ /* Initialize the SPI_BaudRatePrescaler member */
+ SPI_InitStruct->SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2;
+ /* Initialize the SPI_FirstBit member */
+ SPI_InitStruct->SPI_FirstBit = SPI_FirstBit_MSB;
+ /* Initialize the SPI_CRCPolynomial member */
+ SPI_InitStruct->SPI_CRCPolynomial = 7;
+}
+
+/**
+ * @brief Fills each I2S_InitStruct member with its default value.
+ * @param I2S_InitStruct : pointer to a I2S_InitTypeDef structure which will be initialized.
+ * @retval None
+ */
+void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct)
+{
+/*--------------- Reset I2S init structure parameters values -----------------*/
+ /* Initialize the I2S_Mode member */
+ I2S_InitStruct->I2S_Mode = I2S_Mode_SlaveTx;
+
+ /* Initialize the I2S_Standard member */
+ I2S_InitStruct->I2S_Standard = I2S_Standard_Phillips;
+
+ /* Initialize the I2S_DataFormat member */
+ I2S_InitStruct->I2S_DataFormat = I2S_DataFormat_16b;
+
+ /* Initialize the I2S_MCLKOutput member */
+ I2S_InitStruct->I2S_MCLKOutput = I2S_MCLKOutput_Disable;
+
+ /* Initialize the I2S_AudioFreq member */
+ I2S_InitStruct->I2S_AudioFreq = I2S_AudioFreq_Default;
+
+ /* Initialize the I2S_CPOL member */
+ I2S_InitStruct->I2S_CPOL = I2S_CPOL_Low;
+}
+
+/**
+ * @brief Enables or disables the specified SPI peripheral.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param NewState: new state of the SPIx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected SPI peripheral */
+ SPIx->CR1 |= CR1_SPE_Set;
+ }
+ else
+ {
+ /* Disable the selected SPI peripheral */
+ SPIx->CR1 &= CR1_SPE_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified SPI peripheral (in I2S mode).
+ * @param SPIx: where x can be 2 or 3 to select the SPI peripheral.
+ * @param NewState: new state of the SPIx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_23_PERIPH(SPIx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected SPI peripheral (in I2S mode) */
+ SPIx->I2SCFGR |= I2SCFGR_I2SE_Set;
+ }
+ else
+ {
+ /* Disable the selected SPI peripheral (in I2S mode) */
+ SPIx->I2SCFGR &= I2SCFGR_I2SE_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified SPI/I2S interrupts.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * - 2 or 3 in I2S mode
+ * @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg SPI_I2S_IT_TXE: Tx buffer empty interrupt mask
+ * @arg SPI_I2S_IT_RXNE: Rx buffer not empty interrupt mask
+ * @arg SPI_I2S_IT_ERR: Error interrupt mask
+ * @param NewState: new state of the specified SPI/I2S interrupt.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState)
+{
+ uint16_t itpos = 0, itmask = 0 ;
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ assert_param(IS_SPI_I2S_CONFIG_IT(SPI_I2S_IT));
+
+ /* Get the SPI/I2S IT index */
+ itpos = SPI_I2S_IT >> 4;
+
+ /* Set the IT mask */
+ itmask = (uint16_t)1 << (uint16_t)itpos;
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected SPI/I2S interrupt */
+ SPIx->CR2 |= itmask;
+ }
+ else
+ {
+ /* Disable the selected SPI/I2S interrupt */
+ SPIx->CR2 &= (uint16_t)~itmask;
+ }
+}
+
+/**
+ * @brief Enables or disables the SPIx/I2Sx DMA interface.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * - 2 or 3 in I2S mode
+ * @param SPI_I2S_DMAReq: specifies the SPI/I2S DMA transfer request to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg SPI_I2S_DMAReq_Tx: Tx buffer DMA transfer request
+ * @arg SPI_I2S_DMAReq_Rx: Rx buffer DMA transfer request
+ * @param NewState: new state of the selected SPI/I2S DMA transfer request.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ assert_param(IS_SPI_I2S_DMAREQ(SPI_I2S_DMAReq));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected SPI/I2S DMA requests */
+ SPIx->CR2 |= SPI_I2S_DMAReq;
+ }
+ else
+ {
+ /* Disable the selected SPI/I2S DMA requests */
+ SPIx->CR2 &= (uint16_t)~SPI_I2S_DMAReq;
+ }
+}
+
+/**
+ * @brief Transmits a Data through the SPIx/I2Sx peripheral.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * - 2 or 3 in I2S mode
+ * @param Data : Data to be transmitted.
+ * @retval None
+ */
+void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+
+ /* Write in the DR register the data to be sent */
+ SPIx->DR = Data;
+}
+
+/**
+ * @brief Returns the most recent received data by the SPIx/I2Sx peripheral.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * - 2 or 3 in I2S mode
+ * @retval The value of the received data.
+ */
+uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+
+ /* Return the data in the DR register */
+ return SPIx->DR;
+}
+
+/**
+ * @brief Configures internally by software the NSS pin for the selected SPI.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param SPI_NSSInternalSoft: specifies the SPI NSS internal state.
+ * This parameter can be one of the following values:
+ * @arg SPI_NSSInternalSoft_Set: Set NSS pin internally
+ * @arg SPI_NSSInternalSoft_Reset: Reset NSS pin internally
+ * @retval None
+ */
+void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_NSS_INTERNAL(SPI_NSSInternalSoft));
+ if (SPI_NSSInternalSoft != SPI_NSSInternalSoft_Reset)
+ {
+ /* Set NSS pin internally by software */
+ SPIx->CR1 |= SPI_NSSInternalSoft_Set;
+ }
+ else
+ {
+ /* Reset NSS pin internally by software */
+ SPIx->CR1 &= SPI_NSSInternalSoft_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the SS output for the selected SPI.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param NewState: new state of the SPIx SS output.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected SPI SS output */
+ SPIx->CR2 |= CR2_SSOE_Set;
+ }
+ else
+ {
+ /* Disable the selected SPI SS output */
+ SPIx->CR2 &= CR2_SSOE_Reset;
+ }
+}
+
+/**
+ * @brief Configures the data size for the selected SPI.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param SPI_DataSize: specifies the SPI data size.
+ * This parameter can be one of the following values:
+ * @arg SPI_DataSize_16b: Set data frame format to 16bit
+ * @arg SPI_DataSize_8b: Set data frame format to 8bit
+ * @retval None
+ */
+void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_DATASIZE(SPI_DataSize));
+ /* Clear DFF bit */
+ SPIx->CR1 &= (uint16_t)~SPI_DataSize_16b;
+ /* Set new DFF bit value */
+ SPIx->CR1 |= SPI_DataSize;
+}
+
+/**
+ * @brief Transmit the SPIx CRC value.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @retval None
+ */
+void SPI_TransmitCRC(SPI_TypeDef* SPIx)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+
+ /* Enable the selected SPI CRC transmission */
+ SPIx->CR1 |= CR1_CRCNext_Set;
+}
+
+/**
+ * @brief Enables or disables the CRC value calculation of the transferred bytes.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param NewState: new state of the SPIx CRC value calculation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected SPI CRC calculation */
+ SPIx->CR1 |= CR1_CRCEN_Set;
+ }
+ else
+ {
+ /* Disable the selected SPI CRC calculation */
+ SPIx->CR1 &= CR1_CRCEN_Reset;
+ }
+}
+
+/**
+ * @brief Returns the transmit or the receive CRC register value for the specified SPI.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param SPI_CRC: specifies the CRC register to be read.
+ * This parameter can be one of the following values:
+ * @arg SPI_CRC_Tx: Selects Tx CRC register
+ * @arg SPI_CRC_Rx: Selects Rx CRC register
+ * @retval The selected CRC register value..
+ */
+uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC)
+{
+ uint16_t crcreg = 0;
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_CRC(SPI_CRC));
+ if (SPI_CRC != SPI_CRC_Rx)
+ {
+ /* Get the Tx CRC register */
+ crcreg = SPIx->TXCRCR;
+ }
+ else
+ {
+ /* Get the Rx CRC register */
+ crcreg = SPIx->RXCRCR;
+ }
+ /* Return the selected CRC register */
+ return crcreg;
+}
+
+/**
+ * @brief Returns the CRC Polynomial register value for the specified SPI.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @retval The CRC Polynomial register value.
+ */
+uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+
+ /* Return the CRC polynomial register */
+ return SPIx->CRCPR;
+}
+
+/**
+ * @brief Selects the data transfer direction in bi-directional mode for the specified SPI.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param SPI_Direction: specifies the data transfer direction in bi-directional mode.
+ * This parameter can be one of the following values:
+ * @arg SPI_Direction_Tx: Selects Tx transmission direction
+ * @arg SPI_Direction_Rx: Selects Rx receive direction
+ * @retval None
+ */
+void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_DIRECTION(SPI_Direction));
+ if (SPI_Direction == SPI_Direction_Tx)
+ {
+ /* Set the Tx only mode */
+ SPIx->CR1 |= SPI_Direction_Tx;
+ }
+ else
+ {
+ /* Set the Rx only mode */
+ SPIx->CR1 &= SPI_Direction_Rx;
+ }
+}
+
+/**
+ * @brief Checks whether the specified SPI/I2S flag is set or not.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * - 2 or 3 in I2S mode
+ * @param SPI_I2S_FLAG: specifies the SPI/I2S flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_I2S_FLAG_TXE: Transmit buffer empty flag.
+ * @arg SPI_I2S_FLAG_RXNE: Receive buffer not empty flag.
+ * @arg SPI_I2S_FLAG_BSY: Busy flag.
+ * @arg SPI_I2S_FLAG_OVR: Overrun flag.
+ * @arg SPI_FLAG_MODF: Mode Fault flag.
+ * @arg SPI_FLAG_CRCERR: CRC Error flag.
+ * @arg I2S_FLAG_UDR: Underrun Error flag.
+ * @arg I2S_FLAG_CHSIDE: Channel Side flag.
+ * @retval The new state of SPI_I2S_FLAG (SET or RESET).
+ */
+FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_I2S_GET_FLAG(SPI_I2S_FLAG));
+ /* Check the status of the specified SPI/I2S flag */
+ if ((SPIx->SR & SPI_I2S_FLAG) != (uint16_t)RESET)
+ {
+ /* SPI_I2S_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* SPI_I2S_FLAG is reset */
+ bitstatus = RESET;
+ }
+ /* Return the SPI_I2S_FLAG status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the SPIx CRC Error (CRCERR) flag.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * @param SPI_I2S_FLAG: specifies the SPI flag to clear.
+ * This function clears only CRCERR flag.
+ * @note
+ * - OVR (OverRun error) flag is cleared by software sequence: a read
+ * operation to SPI_DR register (SPI_I2S_ReceiveData()) followed by a read
+ * operation to SPI_SR register (SPI_I2S_GetFlagStatus()).
+ * - UDR (UnderRun error) flag is cleared by a read operation to
+ * SPI_SR register (SPI_I2S_GetFlagStatus()).
+ * - MODF (Mode Fault) flag is cleared by software sequence: a read/write
+ * operation to SPI_SR register (SPI_I2S_GetFlagStatus()) followed by a
+ * write operation to SPI_CR1 register (SPI_Cmd() to enable the SPI).
+ * @retval None
+ */
+void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_I2S_CLEAR_FLAG(SPI_I2S_FLAG));
+
+ /* Clear the selected SPI CRC Error (CRCERR) flag */
+ SPIx->SR = (uint16_t)~SPI_I2S_FLAG;
+}
+
+/**
+ * @brief Checks whether the specified SPI/I2S interrupt has occurred or not.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * - 2 or 3 in I2S mode
+ * @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_I2S_IT_TXE: Transmit buffer empty interrupt.
+ * @arg SPI_I2S_IT_RXNE: Receive buffer not empty interrupt.
+ * @arg SPI_I2S_IT_OVR: Overrun interrupt.
+ * @arg SPI_IT_MODF: Mode Fault interrupt.
+ * @arg SPI_IT_CRCERR: CRC Error interrupt.
+ * @arg I2S_IT_UDR: Underrun Error interrupt.
+ * @retval The new state of SPI_I2S_IT (SET or RESET).
+ */
+ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint16_t itpos = 0, itmask = 0, enablestatus = 0;
+
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_I2S_GET_IT(SPI_I2S_IT));
+
+ /* Get the SPI/I2S IT index */
+ itpos = 0x01 << (SPI_I2S_IT & 0x0F);
+
+ /* Get the SPI/I2S IT mask */
+ itmask = SPI_I2S_IT >> 4;
+
+ /* Set the IT mask */
+ itmask = 0x01 << itmask;
+
+ /* Get the SPI_I2S_IT enable bit status */
+ enablestatus = (SPIx->CR2 & itmask) ;
+
+ /* Check the status of the specified SPI/I2S interrupt */
+ if (((SPIx->SR & itpos) != (uint16_t)RESET) && enablestatus)
+ {
+ /* SPI_I2S_IT is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* SPI_I2S_IT is reset */
+ bitstatus = RESET;
+ }
+ /* Return the SPI_I2S_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the SPIx CRC Error (CRCERR) interrupt pending bit.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * @param SPI_I2S_IT: specifies the SPI interrupt pending bit to clear.
+ * This function clears only CRCERR interrupt pending bit.
+ * @note
+ * - OVR (OverRun Error) interrupt pending bit is cleared by software
+ * sequence: a read operation to SPI_DR register (SPI_I2S_ReceiveData())
+ * followed by a read operation to SPI_SR register (SPI_I2S_GetITStatus()).
+ * - UDR (UnderRun Error) interrupt pending bit is cleared by a read
+ * operation to SPI_SR register (SPI_I2S_GetITStatus()).
+ * - MODF (Mode Fault) interrupt pending bit is cleared by software sequence:
+ * a read/write operation to SPI_SR register (SPI_I2S_GetITStatus())
+ * followed by a write operation to SPI_CR1 register (SPI_Cmd() to enable
+ * the SPI).
+ * @retval None
+ */
+void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT)
+{
+ uint16_t itpos = 0;
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_I2S_CLEAR_IT(SPI_I2S_IT));
+
+ /* Get the SPI IT index */
+ itpos = 0x01 << (SPI_I2S_IT & 0x0F);
+
+ /* Clear the selected SPI CRC Error (CRCERR) interrupt pending bit */
+ SPIx->SR = (uint16_t)~itpos;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_tim.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_tim.c
new file mode 100644
index 00000000..81c8484e
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_tim.c
@@ -0,0 +1,2890 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_tim.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the TIM firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_tim.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup TIM
+ * @brief TIM driver modules
+ * @{
+ */
+
+/** @defgroup TIM_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_Defines
+ * @{
+ */
+
+/* ---------------------- TIM registers bit mask ------------------------ */
+#define SMCR_ETR_Mask ((uint16_t)0x00FF)
+#define CCMR_Offset ((uint16_t)0x0018)
+#define CCER_CCE_Set ((uint16_t)0x0001)
+#define CCER_CCNE_Set ((uint16_t)0x0004)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_FunctionPrototypes
+ * @{
+ */
+
+static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter);
+static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter);
+static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter);
+static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter);
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the TIMx peripheral registers to their default reset values.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @retval None
+ */
+void TIM_DeInit(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+
+ if (TIMx == TIM1)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE);
+ }
+ else if (TIMx == TIM2)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE);
+ }
+ else if (TIMx == TIM3)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE);
+ }
+ else if (TIMx == TIM4)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE);
+ }
+ else if (TIMx == TIM5)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE);
+ }
+ else if (TIMx == TIM6)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE);
+ }
+ else if (TIMx == TIM7)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE);
+ }
+ else if (TIMx == TIM8)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE);
+ }
+ else if (TIMx == TIM9)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, DISABLE);
+ }
+ else if (TIMx == TIM10)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, DISABLE);
+ }
+ else if (TIMx == TIM11)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, DISABLE);
+ }
+ else if (TIMx == TIM12)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, DISABLE);
+ }
+ else if (TIMx == TIM13)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, DISABLE);
+ }
+ else if (TIMx == TIM14)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, DISABLE);
+ }
+ else if (TIMx == TIM15)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, DISABLE);
+ }
+ else if (TIMx == TIM16)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, DISABLE);
+ }
+ else
+ {
+ if (TIMx == TIM17)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, DISABLE);
+ }
+ }
+}
+
+/**
+ * @brief Initializes the TIMx Time Base Unit peripheral according to
+ * the specified parameters in the TIM_TimeBaseInitStruct.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef
+ * structure that contains the configuration information for the
+ * specified TIM peripheral.
+ * @retval None
+ */
+void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct)
+{
+ uint16_t tmpcr1 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode));
+ assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision));
+
+ tmpcr1 = TIMx->CR1;
+
+ if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM2) || (TIMx == TIM3)||
+ (TIMx == TIM4) || (TIMx == TIM5))
+ {
+ /* Select the Counter Mode */
+ tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS)));
+ tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode;
+ }
+
+ if((TIMx != TIM6) && (TIMx != TIM7))
+ {
+ /* Set the clock division */
+ tmpcr1 &= (uint16_t)(~((uint16_t)TIM_CR1_CKD));
+ tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision;
+ }
+
+ TIMx->CR1 = tmpcr1;
+
+ /* Set the Autoreload value */
+ TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ;
+
+ /* Set the Prescaler value */
+ TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler;
+
+ if ((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)|| (TIMx == TIM16) || (TIMx == TIM17))
+ {
+ /* Set the Repetition Counter value */
+ TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter;
+ }
+
+ /* Generate an update event to reload the Prescaler and the Repetition counter
+ values immediately */
+ TIMx->EGR = TIM_PSCReloadMode_Immediate;
+}
+
+/**
+ * @brief Initializes the TIMx Channel1 according to the specified
+ * parameters in the TIM_OCInitStruct.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
+ * that contains the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+ assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= (uint16_t)(~(uint16_t)TIM_CCER_CC1E);
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_OC1M));
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_CC1S));
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= TIM_OCInitStruct->TIM_OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1P));
+ /* Set the Output Compare Polarity */
+ tmpccer |= TIM_OCInitStruct->TIM_OCPolarity;
+
+ /* Set the Output State */
+ tmpccer |= TIM_OCInitStruct->TIM_OutputState;
+
+ if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)||
+ (TIMx == TIM16)|| (TIMx == TIM17))
+ {
+ assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity));
+ assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1NP));
+ /* Set the Output N Polarity */
+ tmpccer |= TIM_OCInitStruct->TIM_OCNPolarity;
+
+ /* Reset the Output N State */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1NE));
+ /* Set the Output N State */
+ tmpccer |= TIM_OCInitStruct->TIM_OutputNState;
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1));
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1N));
+
+ /* Set the Output Idle state */
+ tmpcr2 |= TIM_OCInitStruct->TIM_OCIdleState;
+ /* Set the Output N Idle state */
+ tmpcr2 |= TIM_OCInitStruct->TIM_OCNIdleState;
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR1 = TIM_OCInitStruct->TIM_Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Initializes the TIMx Channel2 according to the specified
+ * parameters in the TIM_OCInitStruct.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select
+ * the TIM peripheral.
+ * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
+ * that contains the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+ assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC2E));
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_OC2M));
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_CC2S));
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2P));
+ /* Set the Output Compare Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 4);
+
+ /* Set the Output State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 4);
+
+ if((TIMx == TIM1) || (TIMx == TIM8))
+ {
+ assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity));
+ assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2NP));
+ /* Set the Output N Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 4);
+
+ /* Reset the Output N State */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2NE));
+ /* Set the Output N State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 4);
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2));
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2N));
+
+ /* Set the Output Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 2);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 2);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR2 = TIM_OCInitStruct->TIM_Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Initializes the TIMx Channel3 according to the specified
+ * parameters in the TIM_OCInitStruct.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
+ * that contains the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+ assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC3E));
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_OC3M));
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_CC3S));
+ /* Select the Output Compare Mode */
+ tmpccmrx |= TIM_OCInitStruct->TIM_OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3P));
+ /* Set the Output Compare Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 8);
+
+ /* Set the Output State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 8);
+
+ if((TIMx == TIM1) || (TIMx == TIM8))
+ {
+ assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity));
+ assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3NP));
+ /* Set the Output N Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 8);
+ /* Reset the Output N State */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3NE));
+
+ /* Set the Output N State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 8);
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3));
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3N));
+ /* Set the Output Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 4);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 4);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR3 = TIM_OCInitStruct->TIM_Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Initializes the TIMx Channel4 according to the specified
+ * parameters in the TIM_OCInitStruct.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
+ * that contains the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+ assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));
+ /* Disable the Channel 2: Reset the CC4E Bit */
+ TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC4E));
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_OC4M));
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_CC4S));
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC4P));
+ /* Set the Output Compare Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 12);
+
+ /* Set the Output State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 12);
+
+ if((TIMx == TIM1) || (TIMx == TIM8))
+ {
+ assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS4));
+ /* Set the Output Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 6);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR4 = TIM_OCInitStruct->TIM_Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Initializes the TIM peripheral according to the specified
+ * parameters in the TIM_ICInitStruct.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure
+ * that contains the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNEL(TIM_ICInitStruct->TIM_Channel));
+ assert_param(IS_TIM_IC_SELECTION(TIM_ICInitStruct->TIM_ICSelection));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICInitStruct->TIM_ICPrescaler));
+ assert_param(IS_TIM_IC_FILTER(TIM_ICInitStruct->TIM_ICFilter));
+
+ if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+ (TIMx == TIM4) ||(TIMx == TIM5))
+ {
+ assert_param(IS_TIM_IC_POLARITY(TIM_ICInitStruct->TIM_ICPolarity));
+ }
+ else
+ {
+ assert_param(IS_TIM_IC_POLARITY_LITE(TIM_ICInitStruct->TIM_ICPolarity));
+ }
+ if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1)
+ {
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ /* TI1 Configuration */
+ TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
+ TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+ else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_2)
+ {
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ /* TI2 Configuration */
+ TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
+ TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+ else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_3)
+ {
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ /* TI3 Configuration */
+ TI3_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
+ TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC3Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+ else
+ {
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ /* TI4 Configuration */
+ TI4_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
+ TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC4Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+}
+
+/**
+ * @brief Configures the TIM peripheral according to the specified
+ * parameters in the TIM_ICInitStruct to measure an external PWM signal.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure
+ * that contains the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct)
+{
+ uint16_t icoppositepolarity = TIM_ICPolarity_Rising;
+ uint16_t icoppositeselection = TIM_ICSelection_DirectTI;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ /* Select the Opposite Input Polarity */
+ if (TIM_ICInitStruct->TIM_ICPolarity == TIM_ICPolarity_Rising)
+ {
+ icoppositepolarity = TIM_ICPolarity_Falling;
+ }
+ else
+ {
+ icoppositepolarity = TIM_ICPolarity_Rising;
+ }
+ /* Select the Opposite Input */
+ if (TIM_ICInitStruct->TIM_ICSelection == TIM_ICSelection_DirectTI)
+ {
+ icoppositeselection = TIM_ICSelection_IndirectTI;
+ }
+ else
+ {
+ icoppositeselection = TIM_ICSelection_DirectTI;
+ }
+ if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1)
+ {
+ /* TI1 Configuration */
+ TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ /* TI2 Configuration */
+ TI2_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+ else
+ {
+ /* TI2 Configuration */
+ TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ /* TI1 Configuration */
+ TI1_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+}
+
+/**
+ * @brief Configures the: Break feature, dead time, Lock level, the OSSI,
+ * the OSSR State and the AOE(automatic output enable).
+ * @param TIMx: where x can be 1 or 8 to select the TIM
+ * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure that
+ * contains the BDTR Register configuration information for the TIM peripheral.
+ * @retval None
+ */
+void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_OSSR_STATE(TIM_BDTRInitStruct->TIM_OSSRState));
+ assert_param(IS_TIM_OSSI_STATE(TIM_BDTRInitStruct->TIM_OSSIState));
+ assert_param(IS_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->TIM_LOCKLevel));
+ assert_param(IS_TIM_BREAK_STATE(TIM_BDTRInitStruct->TIM_Break));
+ assert_param(IS_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->TIM_BreakPolarity));
+ assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->TIM_AutomaticOutput));
+ /* Set the Lock level, the Break enable Bit and the Ploarity, the OSSR State,
+ the OSSI State, the dead time value and the Automatic Output Enable Bit */
+ TIMx->BDTR = (uint32_t)TIM_BDTRInitStruct->TIM_OSSRState | TIM_BDTRInitStruct->TIM_OSSIState |
+ TIM_BDTRInitStruct->TIM_LOCKLevel | TIM_BDTRInitStruct->TIM_DeadTime |
+ TIM_BDTRInitStruct->TIM_Break | TIM_BDTRInitStruct->TIM_BreakPolarity |
+ TIM_BDTRInitStruct->TIM_AutomaticOutput;
+}
+
+/**
+ * @brief Fills each TIM_TimeBaseInitStruct member with its default value.
+ * @param TIM_TimeBaseInitStruct : pointer to a TIM_TimeBaseInitTypeDef
+ * structure which will be initialized.
+ * @retval None
+ */
+void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct)
+{
+ /* Set the default configuration */
+ TIM_TimeBaseInitStruct->TIM_Period = 0xFFFF;
+ TIM_TimeBaseInitStruct->TIM_Prescaler = 0x0000;
+ TIM_TimeBaseInitStruct->TIM_ClockDivision = TIM_CKD_DIV1;
+ TIM_TimeBaseInitStruct->TIM_CounterMode = TIM_CounterMode_Up;
+ TIM_TimeBaseInitStruct->TIM_RepetitionCounter = 0x0000;
+}
+
+/**
+ * @brief Fills each TIM_OCInitStruct member with its default value.
+ * @param TIM_OCInitStruct : pointer to a TIM_OCInitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ /* Set the default configuration */
+ TIM_OCInitStruct->TIM_OCMode = TIM_OCMode_Timing;
+ TIM_OCInitStruct->TIM_OutputState = TIM_OutputState_Disable;
+ TIM_OCInitStruct->TIM_OutputNState = TIM_OutputNState_Disable;
+ TIM_OCInitStruct->TIM_Pulse = 0x0000;
+ TIM_OCInitStruct->TIM_OCPolarity = TIM_OCPolarity_High;
+ TIM_OCInitStruct->TIM_OCNPolarity = TIM_OCPolarity_High;
+ TIM_OCInitStruct->TIM_OCIdleState = TIM_OCIdleState_Reset;
+ TIM_OCInitStruct->TIM_OCNIdleState = TIM_OCNIdleState_Reset;
+}
+
+/**
+ * @brief Fills each TIM_ICInitStruct member with its default value.
+ * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct)
+{
+ /* Set the default configuration */
+ TIM_ICInitStruct->TIM_Channel = TIM_Channel_1;
+ TIM_ICInitStruct->TIM_ICPolarity = TIM_ICPolarity_Rising;
+ TIM_ICInitStruct->TIM_ICSelection = TIM_ICSelection_DirectTI;
+ TIM_ICInitStruct->TIM_ICPrescaler = TIM_ICPSC_DIV1;
+ TIM_ICInitStruct->TIM_ICFilter = 0x00;
+}
+
+/**
+ * @brief Fills each TIM_BDTRInitStruct member with its default value.
+ * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure which
+ * will be initialized.
+ * @retval None
+ */
+void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct)
+{
+ /* Set the default configuration */
+ TIM_BDTRInitStruct->TIM_OSSRState = TIM_OSSRState_Disable;
+ TIM_BDTRInitStruct->TIM_OSSIState = TIM_OSSIState_Disable;
+ TIM_BDTRInitStruct->TIM_LOCKLevel = TIM_LOCKLevel_OFF;
+ TIM_BDTRInitStruct->TIM_DeadTime = 0x00;
+ TIM_BDTRInitStruct->TIM_Break = TIM_Break_Disable;
+ TIM_BDTRInitStruct->TIM_BreakPolarity = TIM_BreakPolarity_Low;
+ TIM_BDTRInitStruct->TIM_AutomaticOutput = TIM_AutomaticOutput_Disable;
+}
+
+/**
+ * @brief Enables or disables the specified TIM peripheral.
+ * @param TIMx: where x can be 1 to 17 to select the TIMx peripheral.
+ * @param NewState: new state of the TIMx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the TIM Counter */
+ TIMx->CR1 |= TIM_CR1_CEN;
+ }
+ else
+ {
+ /* Disable the TIM Counter */
+ TIMx->CR1 &= (uint16_t)(~((uint16_t)TIM_CR1_CEN));
+ }
+}
+
+/**
+ * @brief Enables or disables the TIM peripheral Main Outputs.
+ * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIMx peripheral.
+ * @param NewState: new state of the TIM peripheral Main Outputs.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the TIM Main Output */
+ TIMx->BDTR |= TIM_BDTR_MOE;
+ }
+ else
+ {
+ /* Disable the TIM Main Output */
+ TIMx->BDTR &= (uint16_t)(~((uint16_t)TIM_BDTR_MOE));
+ }
+}
+
+/**
+ * @brief Enables or disables the specified TIM interrupts.
+ * @param TIMx: where x can be 1 to 17 to select the TIMx peripheral.
+ * @param TIM_IT: specifies the TIM interrupts sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg TIM_IT_Update: TIM update Interrupt source
+ * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
+ * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
+ * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
+ * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
+ * @arg TIM_IT_COM: TIM Commutation Interrupt source
+ * @arg TIM_IT_Trigger: TIM Trigger Interrupt source
+ * @arg TIM_IT_Break: TIM Break Interrupt source
+ * @note
+ * - TIM6 and TIM7 can only generate an update interrupt.
+ * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1,
+ * TIM_IT_CC2 or TIM_IT_Trigger.
+ * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1.
+ * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15.
+ * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
+ * @param NewState: new state of the TIM interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_IT(TIM_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the Interrupt sources */
+ TIMx->DIER |= TIM_IT;
+ }
+ else
+ {
+ /* Disable the Interrupt sources */
+ TIMx->DIER &= (uint16_t)~TIM_IT;
+ }
+}
+
+/**
+ * @brief Configures the TIMx event to be generate by software.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_EventSource: specifies the event source.
+ * This parameter can be one or more of the following values:
+ * @arg TIM_EventSource_Update: Timer update Event source
+ * @arg TIM_EventSource_CC1: Timer Capture Compare 1 Event source
+ * @arg TIM_EventSource_CC2: Timer Capture Compare 2 Event source
+ * @arg TIM_EventSource_CC3: Timer Capture Compare 3 Event source
+ * @arg TIM_EventSource_CC4: Timer Capture Compare 4 Event source
+ * @arg TIM_EventSource_COM: Timer COM event source
+ * @arg TIM_EventSource_Trigger: Timer Trigger Event source
+ * @arg TIM_EventSource_Break: Timer Break event source
+ * @note
+ * - TIM6 and TIM7 can only generate an update event.
+ * - TIM_EventSource_COM and TIM_EventSource_Break are used only with TIM1 and TIM8.
+ * @retval None
+ */
+void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_EVENT_SOURCE(TIM_EventSource));
+
+ /* Set the event sources */
+ TIMx->EGR = TIM_EventSource;
+}
+
+/**
+ * @brief Configures the TIMx's DMA interface.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 15, 16 or 17 to select
+ * the TIM peripheral.
+ * @param TIM_DMABase: DMA Base address.
+ * This parameter can be one of the following values:
+ * @arg TIM_DMABase_CR, TIM_DMABase_CR2, TIM_DMABase_SMCR,
+ * TIM_DMABase_DIER, TIM1_DMABase_SR, TIM_DMABase_EGR,
+ * TIM_DMABase_CCMR1, TIM_DMABase_CCMR2, TIM_DMABase_CCER,
+ * TIM_DMABase_CNT, TIM_DMABase_PSC, TIM_DMABase_ARR,
+ * TIM_DMABase_RCR, TIM_DMABase_CCR1, TIM_DMABase_CCR2,
+ * TIM_DMABase_CCR3, TIM_DMABase_CCR4, TIM_DMABase_BDTR,
+ * TIM_DMABase_DCR.
+ * @param TIM_DMABurstLength: DMA Burst length.
+ * This parameter can be one value between:
+ * TIM_DMABurstLength_1Transfer and TIM_DMABurstLength_18Transfers.
+ * @retval None
+ */
+void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST4_PERIPH(TIMx));
+ assert_param(IS_TIM_DMA_BASE(TIM_DMABase));
+ assert_param(IS_TIM_DMA_LENGTH(TIM_DMABurstLength));
+ /* Set the DMA Base and the DMA Burst Length */
+ TIMx->DCR = TIM_DMABase | TIM_DMABurstLength;
+}
+
+/**
+ * @brief Enables or disables the TIMx's DMA Requests.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7, 8, 15, 16 or 17
+ * to select the TIM peripheral.
+ * @param TIM_DMASource: specifies the DMA Request sources.
+ * This parameter can be any combination of the following values:
+ * @arg TIM_DMA_Update: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_Trigger: TIM Trigger DMA source
+ * @param NewState: new state of the DMA Request sources.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST9_PERIPH(TIMx));
+ assert_param(IS_TIM_DMA_SOURCE(TIM_DMASource));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the DMA sources */
+ TIMx->DIER |= TIM_DMASource;
+ }
+ else
+ {
+ /* Disable the DMA sources */
+ TIMx->DIER &= (uint16_t)~TIM_DMASource;
+ }
+}
+
+/**
+ * @brief Configures the TIMx internal Clock
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15
+ * to select the TIM peripheral.
+ * @retval None
+ */
+void TIM_InternalClockConfig(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ /* Disable slave mode to clock the prescaler directly with the internal clock */
+ TIMx->SMCR &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS));
+}
+
+/**
+ * @brief Configures the TIMx Internal Trigger as External Clock
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_ITRSource: Trigger source.
+ * This parameter can be one of the following values:
+ * @param TIM_TS_ITR0: Internal Trigger 0
+ * @param TIM_TS_ITR1: Internal Trigger 1
+ * @param TIM_TS_ITR2: Internal Trigger 2
+ * @param TIM_TS_ITR3: Internal Trigger 3
+ * @retval None
+ */
+void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_INTERNAL_TRIGGER_SELECTION(TIM_InputTriggerSource));
+ /* Select the Internal Trigger */
+ TIM_SelectInputTrigger(TIMx, TIM_InputTriggerSource);
+ /* Select the External clock mode1 */
+ TIMx->SMCR |= TIM_SlaveMode_External1;
+}
+
+/**
+ * @brief Configures the TIMx Trigger as External Clock
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_TIxExternalCLKSource: Trigger source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TIxExternalCLK1Source_TI1ED: TI1 Edge Detector
+ * @arg TIM_TIxExternalCLK1Source_TI1: Filtered Timer Input 1
+ * @arg TIM_TIxExternalCLK1Source_TI2: Filtered Timer Input 2
+ * @param TIM_ICPolarity: specifies the TIx Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @param ICFilter : specifies the filter value.
+ * This parameter must be a value between 0x0 and 0xF.
+ * @retval None
+ */
+void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource,
+ uint16_t TIM_ICPolarity, uint16_t ICFilter)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_TIXCLK_SOURCE(TIM_TIxExternalCLKSource));
+ assert_param(IS_TIM_IC_POLARITY(TIM_ICPolarity));
+ assert_param(IS_TIM_IC_FILTER(ICFilter));
+ /* Configure the Timer Input Clock Source */
+ if (TIM_TIxExternalCLKSource == TIM_TIxExternalCLK1Source_TI2)
+ {
+ TI2_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter);
+ }
+ else
+ {
+ TI1_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter);
+ }
+ /* Select the Trigger source */
+ TIM_SelectInputTrigger(TIMx, TIM_TIxExternalCLKSource);
+ /* Select the External clock mode1 */
+ TIMx->SMCR |= TIM_SlaveMode_External1;
+}
+
+/**
+ * @brief Configures the External clock Mode1
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF.
+ * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
+ * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
+ * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity: The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
+ * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
+ * @param ExtTRGFilter: External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
+ uint16_t ExtTRGFilter)
+{
+ uint16_t tmpsmcr = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler));
+ assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity));
+ assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter));
+ /* Configure the ETR Clock source */
+ TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter);
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+ /* Reset the SMS Bits */
+ tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS));
+ /* Select the External clock mode1 */
+ tmpsmcr |= TIM_SlaveMode_External1;
+ /* Select the Trigger selection : ETRF */
+ tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_TS));
+ tmpsmcr |= TIM_TS_ETRF;
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Configures the External clock Mode2
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF.
+ * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
+ * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
+ * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity: The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
+ * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
+ * @param ExtTRGFilter: External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler,
+ uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler));
+ assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity));
+ assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter));
+ /* Configure the ETR Clock source */
+ TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter);
+ /* Enable the External clock mode2 */
+ TIMx->SMCR |= TIM_SMCR_ECE;
+}
+
+/**
+ * @brief Configures the TIMx External Trigger (ETR).
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF.
+ * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
+ * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
+ * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity: The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
+ * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
+ * @param ExtTRGFilter: External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
+ uint16_t ExtTRGFilter)
+{
+ uint16_t tmpsmcr = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler));
+ assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity));
+ assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter));
+ tmpsmcr = TIMx->SMCR;
+ /* Reset the ETR Bits */
+ tmpsmcr &= SMCR_ETR_Mask;
+ /* Set the Prescaler, the Filter value and the Polarity */
+ tmpsmcr |= (uint16_t)(TIM_ExtTRGPrescaler | (uint16_t)(TIM_ExtTRGPolarity | (uint16_t)(ExtTRGFilter << (uint16_t)8)));
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Configures the TIMx Prescaler.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param Prescaler: specifies the Prescaler Register value
+ * @param TIM_PSCReloadMode: specifies the TIM Prescaler Reload mode
+ * This parameter can be one of the following values:
+ * @arg TIM_PSCReloadMode_Update: The Prescaler is loaded at the update event.
+ * @arg TIM_PSCReloadMode_Immediate: The Prescaler is loaded immediately.
+ * @retval None
+ */
+void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_PRESCALER_RELOAD(TIM_PSCReloadMode));
+ /* Set the Prescaler value */
+ TIMx->PSC = Prescaler;
+ /* Set or reset the UG Bit */
+ TIMx->EGR = TIM_PSCReloadMode;
+}
+
+/**
+ * @brief Specifies the TIMx Counter Mode to be used.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_CounterMode: specifies the Counter Mode to be used
+ * This parameter can be one of the following values:
+ * @arg TIM_CounterMode_Up: TIM Up Counting Mode
+ * @arg TIM_CounterMode_Down: TIM Down Counting Mode
+ * @arg TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1
+ * @arg TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2
+ * @arg TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3
+ * @retval None
+ */
+void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode)
+{
+ uint16_t tmpcr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_COUNTER_MODE(TIM_CounterMode));
+ tmpcr1 = TIMx->CR1;
+ /* Reset the CMS and DIR Bits */
+ tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS)));
+ /* Set the Counter Mode */
+ tmpcr1 |= TIM_CounterMode;
+ /* Write to TIMx CR1 register */
+ TIMx->CR1 = tmpcr1;
+}
+
+/**
+ * @brief Selects the Input Trigger source
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_InputTriggerSource: The Input Trigger source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal Trigger 0
+ * @arg TIM_TS_ITR1: Internal Trigger 1
+ * @arg TIM_TS_ITR2: Internal Trigger 2
+ * @arg TIM_TS_ITR3: Internal Trigger 3
+ * @arg TIM_TS_TI1F_ED: TI1 Edge Detector
+ * @arg TIM_TS_TI1FP1: Filtered Timer Input 1
+ * @arg TIM_TS_TI2FP2: Filtered Timer Input 2
+ * @arg TIM_TS_ETRF: External Trigger input
+ * @retval None
+ */
+void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource)
+{
+ uint16_t tmpsmcr = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_TRIGGER_SELECTION(TIM_InputTriggerSource));
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+ /* Reset the TS Bits */
+ tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_TS));
+ /* Set the Input Trigger source */
+ tmpsmcr |= TIM_InputTriggerSource;
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Configures the TIMx Encoder Interface.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_EncoderMode: specifies the TIMx Encoder Mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge depending on TI2FP2 level.
+ * @arg TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge depending on TI1FP1 level.
+ * @arg TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and TI2FP2 edges depending
+ * on the level of the other input.
+ * @param TIM_IC1Polarity: specifies the IC1 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Falling: IC Falling edge.
+ * @arg TIM_ICPolarity_Rising: IC Rising edge.
+ * @param TIM_IC2Polarity: specifies the IC2 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Falling: IC Falling edge.
+ * @arg TIM_ICPolarity_Rising: IC Rising edge.
+ * @retval None
+ */
+void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode,
+ uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity)
+{
+ uint16_t tmpsmcr = 0;
+ uint16_t tmpccmr1 = 0;
+ uint16_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST5_PERIPH(TIMx));
+ assert_param(IS_TIM_ENCODER_MODE(TIM_EncoderMode));
+ assert_param(IS_TIM_IC_POLARITY(TIM_IC1Polarity));
+ assert_param(IS_TIM_IC_POLARITY(TIM_IC2Polarity));
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+
+ /* Set the encoder Mode */
+ tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS));
+ tmpsmcr |= TIM_EncoderMode;
+
+ /* Select the Capture Compare 1 and the Capture Compare 2 as input */
+ tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC1S)) & (uint16_t)(~((uint16_t)TIM_CCMR1_CC2S)));
+ tmpccmr1 |= TIM_CCMR1_CC1S_0 | TIM_CCMR1_CC2S_0;
+
+ /* Set the TI1 and the TI2 Polarities */
+ tmpccer &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCER_CC1P)) & ((uint16_t)~((uint16_t)TIM_CCER_CC2P)));
+ tmpccer |= (uint16_t)(TIM_IC1Polarity | (uint16_t)(TIM_IC2Polarity << (uint16_t)4));
+
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmr1;
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Forces the TIMx output 1 waveform to active or inactive level.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+ * This parameter can be one of the following values:
+ * @arg TIM_ForcedAction_Active: Force active level on OC1REF
+ * @arg TIM_ForcedAction_InActive: Force inactive level on OC1REF.
+ * @retval None
+ */
+void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC1M Bits */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1M);
+ /* Configure The Forced output Mode */
+ tmpccmr1 |= TIM_ForcedAction;
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Forces the TIMx output 2 waveform to active or inactive level.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+ * This parameter can be one of the following values:
+ * @arg TIM_ForcedAction_Active: Force active level on OC2REF
+ * @arg TIM_ForcedAction_InActive: Force inactive level on OC2REF.
+ * @retval None
+ */
+void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC2M Bits */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2M);
+ /* Configure The Forced output Mode */
+ tmpccmr1 |= (uint16_t)(TIM_ForcedAction << 8);
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Forces the TIMx output 3 waveform to active or inactive level.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+ * This parameter can be one of the following values:
+ * @arg TIM_ForcedAction_Active: Force active level on OC3REF
+ * @arg TIM_ForcedAction_InActive: Force inactive level on OC3REF.
+ * @retval None
+ */
+void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC1M Bits */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3M);
+ /* Configure The Forced output Mode */
+ tmpccmr2 |= TIM_ForcedAction;
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Forces the TIMx output 4 waveform to active or inactive level.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+ * This parameter can be one of the following values:
+ * @arg TIM_ForcedAction_Active: Force active level on OC4REF
+ * @arg TIM_ForcedAction_InActive: Force inactive level on OC4REF.
+ * @retval None
+ */
+void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC2M Bits */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4M);
+ /* Configure The Forced output Mode */
+ tmpccmr2 |= (uint16_t)(TIM_ForcedAction << 8);
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Enables or disables TIMx peripheral Preload register on ARR.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param NewState: new state of the TIMx peripheral Preload register
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the ARR Preload Bit */
+ TIMx->CR1 |= TIM_CR1_ARPE;
+ }
+ else
+ {
+ /* Reset the ARR Preload Bit */
+ TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_ARPE);
+ }
+}
+
+/**
+ * @brief Selects the TIM peripheral Commutation event.
+ * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIMx peripheral
+ * @param NewState: new state of the Commutation event.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the COM Bit */
+ TIMx->CR2 |= TIM_CR2_CCUS;
+ }
+ else
+ {
+ /* Reset the COM Bit */
+ TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCUS);
+ }
+}
+
+/**
+ * @brief Selects the TIMx peripheral Capture Compare DMA source.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 15, 16 or 17 to select
+ * the TIM peripheral.
+ * @param NewState: new state of the Capture Compare DMA source
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST4_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the CCDS Bit */
+ TIMx->CR2 |= TIM_CR2_CCDS;
+ }
+ else
+ {
+ /* Reset the CCDS Bit */
+ TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCDS);
+ }
+}
+
+/**
+ * @brief Sets or Resets the TIM peripheral Capture Compare Preload Control bit.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8 or 15
+ * to select the TIMx peripheral
+ * @param NewState: new state of the Capture Compare Preload Control bit
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST5_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the CCPC Bit */
+ TIMx->CR2 |= TIM_CR2_CCPC;
+ }
+ else
+ {
+ /* Reset the CCPC Bit */
+ TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCPC);
+ }
+}
+
+/**
+ * @brief Enables or disables the TIMx peripheral Preload register on CCR1.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_OCPreload: new state of the TIMx peripheral Preload register
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPreload_Enable
+ * @arg TIM_OCPreload_Disable
+ * @retval None
+ */
+void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC1PE Bit */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1PE);
+ /* Enable or Disable the Output Compare Preload feature */
+ tmpccmr1 |= TIM_OCPreload;
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Enables or disables the TIMx peripheral Preload register on CCR2.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select
+ * the TIM peripheral.
+ * @param TIM_OCPreload: new state of the TIMx peripheral Preload register
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPreload_Enable
+ * @arg TIM_OCPreload_Disable
+ * @retval None
+ */
+void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC2PE Bit */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2PE);
+ /* Enable or Disable the Output Compare Preload feature */
+ tmpccmr1 |= (uint16_t)(TIM_OCPreload << 8);
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Enables or disables the TIMx peripheral Preload register on CCR3.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCPreload: new state of the TIMx peripheral Preload register
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPreload_Enable
+ * @arg TIM_OCPreload_Disable
+ * @retval None
+ */
+void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC3PE Bit */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3PE);
+ /* Enable or Disable the Output Compare Preload feature */
+ tmpccmr2 |= TIM_OCPreload;
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Enables or disables the TIMx peripheral Preload register on CCR4.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCPreload: new state of the TIMx peripheral Preload register
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPreload_Enable
+ * @arg TIM_OCPreload_Disable
+ * @retval None
+ */
+void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC4PE Bit */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4PE);
+ /* Enable or Disable the Output Compare Preload feature */
+ tmpccmr2 |= (uint16_t)(TIM_OCPreload << 8);
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Configures the TIMx Output Compare 1 Fast feature.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCFast_Enable: TIM output compare fast enable
+ * @arg TIM_OCFast_Disable: TIM output compare fast disable
+ * @retval None
+ */
+void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC1FE Bit */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1FE);
+ /* Enable or Disable the Output Compare Fast Bit */
+ tmpccmr1 |= TIM_OCFast;
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Configures the TIMx Output Compare 2 Fast feature.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select
+ * the TIM peripheral.
+ * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCFast_Enable: TIM output compare fast enable
+ * @arg TIM_OCFast_Disable: TIM output compare fast disable
+ * @retval None
+ */
+void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC2FE Bit */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2FE);
+ /* Enable or Disable the Output Compare Fast Bit */
+ tmpccmr1 |= (uint16_t)(TIM_OCFast << 8);
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Configures the TIMx Output Compare 3 Fast feature.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCFast_Enable: TIM output compare fast enable
+ * @arg TIM_OCFast_Disable: TIM output compare fast disable
+ * @retval None
+ */
+void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+ /* Get the TIMx CCMR2 register value */
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC3FE Bit */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3FE);
+ /* Enable or Disable the Output Compare Fast Bit */
+ tmpccmr2 |= TIM_OCFast;
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Configures the TIMx Output Compare 4 Fast feature.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCFast_Enable: TIM output compare fast enable
+ * @arg TIM_OCFast_Disable: TIM output compare fast disable
+ * @retval None
+ */
+void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+ /* Get the TIMx CCMR2 register value */
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC4FE Bit */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4FE);
+ /* Enable or Disable the Output Compare Fast Bit */
+ tmpccmr2 |= (uint16_t)(TIM_OCFast << 8);
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Clears or safeguards the OCREF1 signal on an external event
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCClear_Enable: TIM Output clear enable
+ * @arg TIM_OCClear_Disable: TIM Output clear disable
+ * @retval None
+ */
+void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Reset the OC1CE Bit */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1CE);
+ /* Enable or Disable the Output Compare Clear Bit */
+ tmpccmr1 |= TIM_OCClear;
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Clears or safeguards the OCREF2 signal on an external event
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCClear_Enable: TIM Output clear enable
+ * @arg TIM_OCClear_Disable: TIM Output clear disable
+ * @retval None
+ */
+void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC2CE Bit */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2CE);
+ /* Enable or Disable the Output Compare Clear Bit */
+ tmpccmr1 |= (uint16_t)(TIM_OCClear << 8);
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Clears or safeguards the OCREF3 signal on an external event
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCClear_Enable: TIM Output clear enable
+ * @arg TIM_OCClear_Disable: TIM Output clear disable
+ * @retval None
+ */
+void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC3CE Bit */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3CE);
+ /* Enable or Disable the Output Compare Clear Bit */
+ tmpccmr2 |= TIM_OCClear;
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Clears or safeguards the OCREF4 signal on an external event
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCClear_Enable: TIM Output clear enable
+ * @arg TIM_OCClear_Disable: TIM Output clear disable
+ * @retval None
+ */
+void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC4CE Bit */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4CE);
+ /* Enable or Disable the Output Compare Clear Bit */
+ tmpccmr2 |= (uint16_t)(TIM_OCClear << 8);
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Configures the TIMx channel 1 polarity.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_OCPolarity: specifies the OC1 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPolarity_High: Output Compare active high
+ * @arg TIM_OCPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+ uint16_t tmpccer = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC1P Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC1P);
+ tmpccer |= TIM_OCPolarity;
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx Channel 1N polarity.
+ * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral.
+ * @param TIM_OCNPolarity: specifies the OC1N Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCNPolarity_High: Output Compare active high
+ * @arg TIM_OCNPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity)
+{
+ uint16_t tmpccer = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity));
+
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC1NP Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC1NP);
+ tmpccer |= TIM_OCNPolarity;
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx channel 2 polarity.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_OCPolarity: specifies the OC2 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPolarity_High: Output Compare active high
+ * @arg TIM_OCPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+ uint16_t tmpccer = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC2P Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC2P);
+ tmpccer |= (uint16_t)(TIM_OCPolarity << 4);
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx Channel 2N polarity.
+ * @param TIMx: where x can be 1 or 8 to select the TIM peripheral.
+ * @param TIM_OCNPolarity: specifies the OC2N Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCNPolarity_High: Output Compare active high
+ * @arg TIM_OCNPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity)
+{
+ uint16_t tmpccer = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity));
+
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC2NP Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC2NP);
+ tmpccer |= (uint16_t)(TIM_OCNPolarity << 4);
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx channel 3 polarity.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCPolarity: specifies the OC3 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPolarity_High: Output Compare active high
+ * @arg TIM_OCPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+ uint16_t tmpccer = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC3P Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC3P);
+ tmpccer |= (uint16_t)(TIM_OCPolarity << 8);
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx Channel 3N polarity.
+ * @param TIMx: where x can be 1 or 8 to select the TIM peripheral.
+ * @param TIM_OCNPolarity: specifies the OC3N Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCNPolarity_High: Output Compare active high
+ * @arg TIM_OCNPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity)
+{
+ uint16_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity));
+
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC3NP Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC3NP);
+ tmpccer |= (uint16_t)(TIM_OCNPolarity << 8);
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx channel 4 polarity.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCPolarity: specifies the OC4 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPolarity_High: Output Compare active high
+ * @arg TIM_OCPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+ uint16_t tmpccer = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC4P Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC4P);
+ tmpccer |= (uint16_t)(TIM_OCPolarity << 12);
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel x.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_Channel: specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @arg TIM_Channel_4: TIM Channel 4
+ * @param TIM_CCx: specifies the TIM Channel CCxE bit new state.
+ * This parameter can be: TIM_CCx_Enable or TIM_CCx_Disable.
+ * @retval None
+ */
+void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx)
+{
+ uint16_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_CHANNEL(TIM_Channel));
+ assert_param(IS_TIM_CCX(TIM_CCx));
+
+ tmp = CCER_CCE_Set << TIM_Channel;
+
+ /* Reset the CCxE Bit */
+ TIMx->CCER &= (uint16_t)~ tmp;
+
+ /* Set or reset the CCxE Bit */
+ TIMx->CCER |= (uint16_t)(TIM_CCx << TIM_Channel);
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel xN.
+ * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral.
+ * @param TIM_Channel: specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @param TIM_CCxN: specifies the TIM Channel CCxNE bit new state.
+ * This parameter can be: TIM_CCxN_Enable or TIM_CCxN_Disable.
+ * @retval None
+ */
+void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN)
+{
+ uint16_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_COMPLEMENTARY_CHANNEL(TIM_Channel));
+ assert_param(IS_TIM_CCXN(TIM_CCxN));
+
+ tmp = CCER_CCNE_Set << TIM_Channel;
+
+ /* Reset the CCxNE Bit */
+ TIMx->CCER &= (uint16_t) ~tmp;
+
+ /* Set or reset the CCxNE Bit */
+ TIMx->CCER |= (uint16_t)(TIM_CCxN << TIM_Channel);
+}
+
+/**
+ * @brief Selects the TIM Output Compare Mode.
+ * @note This function disables the selected channel before changing the Output
+ * Compare Mode.
+ * User has to enable this channel using TIM_CCxCmd and TIM_CCxNCmd functions.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_Channel: specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @arg TIM_Channel_4: TIM Channel 4
+ * @param TIM_OCMode: specifies the TIM Output Compare Mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCMode_Timing
+ * @arg TIM_OCMode_Active
+ * @arg TIM_OCMode_Toggle
+ * @arg TIM_OCMode_PWM1
+ * @arg TIM_OCMode_PWM2
+ * @arg TIM_ForcedAction_Active
+ * @arg TIM_ForcedAction_InActive
+ * @retval None
+ */
+void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode)
+{
+ uint32_t tmp = 0;
+ uint16_t tmp1 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_CHANNEL(TIM_Channel));
+ assert_param(IS_TIM_OCM(TIM_OCMode));
+
+ tmp = (uint32_t) TIMx;
+ tmp += CCMR_Offset;
+
+ tmp1 = CCER_CCE_Set << (uint16_t)TIM_Channel;
+
+ /* Disable the Channel: Reset the CCxE Bit */
+ TIMx->CCER &= (uint16_t) ~tmp1;
+
+ if((TIM_Channel == TIM_Channel_1) ||(TIM_Channel == TIM_Channel_3))
+ {
+ tmp += (TIM_Channel>>1);
+
+ /* Reset the OCxM bits in the CCMRx register */
+ *(__IO uint32_t *) tmp &= (uint32_t)~((uint32_t)TIM_CCMR1_OC1M);
+
+ /* Configure the OCxM bits in the CCMRx register */
+ *(__IO uint32_t *) tmp |= TIM_OCMode;
+ }
+ else
+ {
+ tmp += (uint16_t)(TIM_Channel - (uint16_t)4)>> (uint16_t)1;
+
+ /* Reset the OCxM bits in the CCMRx register */
+ *(__IO uint32_t *) tmp &= (uint32_t)~((uint32_t)TIM_CCMR1_OC2M);
+
+ /* Configure the OCxM bits in the CCMRx register */
+ *(__IO uint32_t *) tmp |= (uint16_t)(TIM_OCMode << 8);
+ }
+}
+
+/**
+ * @brief Enables or Disables the TIMx Update event.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param NewState: new state of the TIMx UDIS bit
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the Update Disable Bit */
+ TIMx->CR1 |= TIM_CR1_UDIS;
+ }
+ else
+ {
+ /* Reset the Update Disable Bit */
+ TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_UDIS);
+ }
+}
+
+/**
+ * @brief Configures the TIMx Update Request Interrupt source.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_UpdateSource: specifies the Update source.
+ * This parameter can be one of the following values:
+ * @arg TIM_UpdateSource_Regular: Source of update is the counter overflow/underflow
+ or the setting of UG bit, or an update generation
+ through the slave mode controller.
+ * @arg TIM_UpdateSource_Global: Source of update is counter overflow/underflow.
+ * @retval None
+ */
+void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_UPDATE_SOURCE(TIM_UpdateSource));
+ if (TIM_UpdateSource != TIM_UpdateSource_Global)
+ {
+ /* Set the URS Bit */
+ TIMx->CR1 |= TIM_CR1_URS;
+ }
+ else
+ {
+ /* Reset the URS Bit */
+ TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_URS);
+ }
+}
+
+/**
+ * @brief Enables or disables the TIMx's Hall sensor interface.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param NewState: new state of the TIMx Hall sensor interface.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the TI1S Bit */
+ TIMx->CR2 |= TIM_CR2_TI1S;
+ }
+ else
+ {
+ /* Reset the TI1S Bit */
+ TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_TI1S);
+ }
+}
+
+/**
+ * @brief Selects the TIMx's One Pulse Mode.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_OPMode: specifies the OPM Mode to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_OPMode_Single
+ * @arg TIM_OPMode_Repetitive
+ * @retval None
+ */
+void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_OPM_MODE(TIM_OPMode));
+ /* Reset the OPM Bit */
+ TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_OPM);
+ /* Configure the OPM Mode */
+ TIMx->CR1 |= TIM_OPMode;
+}
+
+/**
+ * @brief Selects the TIMx Trigger Output Mode.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_TRGOSource: specifies the Trigger Output source.
+ * This paramter can be one of the following values:
+ *
+ * - For all TIMx
+ * @arg TIM_TRGOSource_Reset: The UG bit in the TIM_EGR register is used as the trigger output (TRGO).
+ * @arg TIM_TRGOSource_Enable: The Counter Enable CEN is used as the trigger output (TRGO).
+ * @arg TIM_TRGOSource_Update: The update event is selected as the trigger output (TRGO).
+ *
+ * - For all TIMx except TIM6 and TIM7
+ * @arg TIM_TRGOSource_OC1: The trigger output sends a positive pulse when the CC1IF flag
+ * is to be set, as soon as a capture or compare match occurs (TRGO).
+ * @arg TIM_TRGOSource_OC1Ref: OC1REF signal is used as the trigger output (TRGO).
+ * @arg TIM_TRGOSource_OC2Ref: OC2REF signal is used as the trigger output (TRGO).
+ * @arg TIM_TRGOSource_OC3Ref: OC3REF signal is used as the trigger output (TRGO).
+ * @arg TIM_TRGOSource_OC4Ref: OC4REF signal is used as the trigger output (TRGO).
+ *
+ * @retval None
+ */
+void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST7_PERIPH(TIMx));
+ assert_param(IS_TIM_TRGO_SOURCE(TIM_TRGOSource));
+ /* Reset the MMS Bits */
+ TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_MMS);
+ /* Select the TRGO source */
+ TIMx->CR2 |= TIM_TRGOSource;
+}
+
+/**
+ * @brief Selects the TIMx Slave Mode.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_SlaveMode: specifies the Timer Slave Mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_SlaveMode_Reset: Rising edge of the selected trigger signal (TRGI) re-initializes
+ * the counter and triggers an update of the registers.
+ * @arg TIM_SlaveMode_Gated: The counter clock is enabled when the trigger signal (TRGI) is high.
+ * @arg TIM_SlaveMode_Trigger: The counter starts at a rising edge of the trigger TRGI.
+ * @arg TIM_SlaveMode_External1: Rising edges of the selected trigger (TRGI) clock the counter.
+ * @retval None
+ */
+void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_SLAVE_MODE(TIM_SlaveMode));
+ /* Reset the SMS Bits */
+ TIMx->SMCR &= (uint16_t)~((uint16_t)TIM_SMCR_SMS);
+ /* Select the Slave Mode */
+ TIMx->SMCR |= TIM_SlaveMode;
+}
+
+/**
+ * @brief Sets or Resets the TIMx Master/Slave Mode.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_MasterSlaveMode: specifies the Timer Master Slave Mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_MasterSlaveMode_Enable: synchronization between the current timer
+ * and its slaves (through TRGO).
+ * @arg TIM_MasterSlaveMode_Disable: No action
+ * @retval None
+ */
+void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_MSM_STATE(TIM_MasterSlaveMode));
+ /* Reset the MSM Bit */
+ TIMx->SMCR &= (uint16_t)~((uint16_t)TIM_SMCR_MSM);
+
+ /* Set or Reset the MSM Bit */
+ TIMx->SMCR |= TIM_MasterSlaveMode;
+}
+
+/**
+ * @brief Sets the TIMx Counter Register value
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param Counter: specifies the Counter register new value.
+ * @retval None
+ */
+void TIM_SetCounter(TIM_TypeDef* TIMx, uint16_t Counter)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ /* Set the Counter Register value */
+ TIMx->CNT = Counter;
+}
+
+/**
+ * @brief Sets the TIMx Autoreload Register value
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param Autoreload: specifies the Autoreload register new value.
+ * @retval None
+ */
+void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint16_t Autoreload)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ /* Set the Autoreload Register value */
+ TIMx->ARR = Autoreload;
+}
+
+/**
+ * @brief Sets the TIMx Capture Compare1 Register value
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param Compare1: specifies the Capture Compare1 register new value.
+ * @retval None
+ */
+void TIM_SetCompare1(TIM_TypeDef* TIMx, uint16_t Compare1)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ /* Set the Capture Compare1 Register value */
+ TIMx->CCR1 = Compare1;
+}
+
+/**
+ * @brief Sets the TIMx Capture Compare2 Register value
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param Compare2: specifies the Capture Compare2 register new value.
+ * @retval None
+ */
+void TIM_SetCompare2(TIM_TypeDef* TIMx, uint16_t Compare2)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ /* Set the Capture Compare2 Register value */
+ TIMx->CCR2 = Compare2;
+}
+
+/**
+ * @brief Sets the TIMx Capture Compare3 Register value
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param Compare3: specifies the Capture Compare3 register new value.
+ * @retval None
+ */
+void TIM_SetCompare3(TIM_TypeDef* TIMx, uint16_t Compare3)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ /* Set the Capture Compare3 Register value */
+ TIMx->CCR3 = Compare3;
+}
+
+/**
+ * @brief Sets the TIMx Capture Compare4 Register value
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param Compare4: specifies the Capture Compare4 register new value.
+ * @retval None
+ */
+void TIM_SetCompare4(TIM_TypeDef* TIMx, uint16_t Compare4)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ /* Set the Capture Compare4 Register value */
+ TIMx->CCR4 = Compare4;
+}
+
+/**
+ * @brief Sets the TIMx Input Capture 1 prescaler.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_ICPSC: specifies the Input Capture1 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+ /* Reset the IC1PSC Bits */
+ TIMx->CCMR1 &= (uint16_t)~((uint16_t)TIM_CCMR1_IC1PSC);
+ /* Set the IC1PSC value */
+ TIMx->CCMR1 |= TIM_ICPSC;
+}
+
+/**
+ * @brief Sets the TIMx Input Capture 2 prescaler.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_ICPSC: specifies the Input Capture2 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+ /* Reset the IC2PSC Bits */
+ TIMx->CCMR1 &= (uint16_t)~((uint16_t)TIM_CCMR1_IC2PSC);
+ /* Set the IC2PSC value */
+ TIMx->CCMR1 |= (uint16_t)(TIM_ICPSC << 8);
+}
+
+/**
+ * @brief Sets the TIMx Input Capture 3 prescaler.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ICPSC: specifies the Input Capture3 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+ /* Reset the IC3PSC Bits */
+ TIMx->CCMR2 &= (uint16_t)~((uint16_t)TIM_CCMR2_IC3PSC);
+ /* Set the IC3PSC value */
+ TIMx->CCMR2 |= TIM_ICPSC;
+}
+
+/**
+ * @brief Sets the TIMx Input Capture 4 prescaler.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ICPSC: specifies the Input Capture4 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+ /* Reset the IC4PSC Bits */
+ TIMx->CCMR2 &= (uint16_t)~((uint16_t)TIM_CCMR2_IC4PSC);
+ /* Set the IC4PSC value */
+ TIMx->CCMR2 |= (uint16_t)(TIM_ICPSC << 8);
+}
+
+/**
+ * @brief Sets the TIMx Clock Division value.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select
+ * the TIM peripheral.
+ * @param TIM_CKD: specifies the clock division value.
+ * This parameter can be one of the following value:
+ * @arg TIM_CKD_DIV1: TDTS = Tck_tim
+ * @arg TIM_CKD_DIV2: TDTS = 2*Tck_tim
+ * @arg TIM_CKD_DIV4: TDTS = 4*Tck_tim
+ * @retval None
+ */
+void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_CKD_DIV(TIM_CKD));
+ /* Reset the CKD Bits */
+ TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_CKD);
+ /* Set the CKD value */
+ TIMx->CR1 |= TIM_CKD;
+}
+
+/**
+ * @brief Gets the TIMx Input Capture 1 value.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @retval Capture Compare 1 Register value.
+ */
+uint16_t TIM_GetCapture1(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ /* Get the Capture 1 Register value */
+ return TIMx->CCR1;
+}
+
+/**
+ * @brief Gets the TIMx Input Capture 2 value.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @retval Capture Compare 2 Register value.
+ */
+uint16_t TIM_GetCapture2(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ /* Get the Capture 2 Register value */
+ return TIMx->CCR2;
+}
+
+/**
+ * @brief Gets the TIMx Input Capture 3 value.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @retval Capture Compare 3 Register value.
+ */
+uint16_t TIM_GetCapture3(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ /* Get the Capture 3 Register value */
+ return TIMx->CCR3;
+}
+
+/**
+ * @brief Gets the TIMx Input Capture 4 value.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @retval Capture Compare 4 Register value.
+ */
+uint16_t TIM_GetCapture4(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ /* Get the Capture 4 Register value */
+ return TIMx->CCR4;
+}
+
+/**
+ * @brief Gets the TIMx Counter value.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @retval Counter Register value.
+ */
+uint16_t TIM_GetCounter(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ /* Get the Counter Register value */
+ return TIMx->CNT;
+}
+
+/**
+ * @brief Gets the TIMx Prescaler value.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @retval Prescaler Register value.
+ */
+uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ /* Get the Prescaler Register value */
+ return TIMx->PSC;
+}
+
+/**
+ * @brief Checks whether the specified TIM flag is set or not.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg TIM_FLAG_Update: TIM update Flag
+ * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag
+ * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag
+ * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag
+ * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag
+ * @arg TIM_FLAG_COM: TIM Commutation Flag
+ * @arg TIM_FLAG_Trigger: TIM Trigger Flag
+ * @arg TIM_FLAG_Break: TIM Break Flag
+ * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag
+ * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag
+ * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag
+ * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag
+ * @note
+ * - TIM6 and TIM7 can have only one update flag.
+ * - TIM9, TIM12 and TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1,
+ * TIM_FLAG_CC2 or TIM_FLAG_Trigger.
+ * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1.
+ * - TIM_FLAG_Break is used only with TIM1, TIM8 and TIM15.
+ * - TIM_FLAG_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
+ * @retval The new state of TIM_FLAG (SET or RESET).
+ */
+FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG)
+{
+ ITStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_GET_FLAG(TIM_FLAG));
+
+ if ((TIMx->SR & TIM_FLAG) != (uint16_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the TIMx's pending flags.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_FLAG: specifies the flag bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg TIM_FLAG_Update: TIM update Flag
+ * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag
+ * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag
+ * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag
+ * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag
+ * @arg TIM_FLAG_COM: TIM Commutation Flag
+ * @arg TIM_FLAG_Trigger: TIM Trigger Flag
+ * @arg TIM_FLAG_Break: TIM Break Flag
+ * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag
+ * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag
+ * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag
+ * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag
+ * @note
+ * - TIM6 and TIM7 can have only one update flag.
+ * - TIM9, TIM12 and TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1,
+ * TIM_FLAG_CC2 or TIM_FLAG_Trigger.
+ * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1.
+ * - TIM_FLAG_Break is used only with TIM1, TIM8 and TIM15.
+ * - TIM_FLAG_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
+ * @retval None
+ */
+void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_CLEAR_FLAG(TIM_FLAG));
+
+ /* Clear the flags */
+ TIMx->SR = (uint16_t)~TIM_FLAG;
+}
+
+/**
+ * @brief Checks whether the TIM interrupt has occurred or not.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_IT: specifies the TIM interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_Update: TIM update Interrupt source
+ * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
+ * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
+ * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
+ * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
+ * @arg TIM_IT_COM: TIM Commutation Interrupt source
+ * @arg TIM_IT_Trigger: TIM Trigger Interrupt source
+ * @arg TIM_IT_Break: TIM Break Interrupt source
+ * @note
+ * - TIM6 and TIM7 can generate only an update interrupt.
+ * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1,
+ * TIM_IT_CC2 or TIM_IT_Trigger.
+ * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1.
+ * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15.
+ * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
+ * @retval The new state of the TIM_IT(SET or RESET).
+ */
+ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint16_t itstatus = 0x0, itenable = 0x0;
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_GET_IT(TIM_IT));
+
+ itstatus = TIMx->SR & TIM_IT;
+
+ itenable = TIMx->DIER & TIM_IT;
+ if ((itstatus != (uint16_t)RESET) && (itenable != (uint16_t)RESET))
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the TIMx's interrupt pending bits.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_IT: specifies the pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg TIM_IT_Update: TIM1 update Interrupt source
+ * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
+ * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
+ * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
+ * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
+ * @arg TIM_IT_COM: TIM Commutation Interrupt source
+ * @arg TIM_IT_Trigger: TIM Trigger Interrupt source
+ * @arg TIM_IT_Break: TIM Break Interrupt source
+ * @note
+ * - TIM6 and TIM7 can generate only an update interrupt.
+ * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1,
+ * TIM_IT_CC2 or TIM_IT_Trigger.
+ * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1.
+ * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15.
+ * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
+ * @retval None
+ */
+void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_IT(TIM_IT));
+ /* Clear the IT pending Bit */
+ TIMx->SR = (uint16_t)~TIM_IT;
+}
+
+/**
+ * @brief Configure the TI1 as Input.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2.
+ * @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter)
+{
+ uint16_t tmpccmr1 = 0, tmpccer = 0;
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC1E);
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+ /* Select the Input and set the filter */
+ tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC1S)) & ((uint16_t)~((uint16_t)TIM_CCMR1_IC1F)));
+ tmpccmr1 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4));
+
+ if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+ (TIMx == TIM4) ||(TIMx == TIM5))
+ {
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC1P));
+ tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E);
+ }
+ else
+ {
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC1P | TIM_CCER_CC1NP));
+ tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E);
+ }
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI2 as Input.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1.
+ * @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter)
+{
+ uint16_t tmpccmr1 = 0, tmpccer = 0, tmp = 0;
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC2E);
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+ tmp = (uint16_t)(TIM_ICPolarity << 4);
+ /* Select the Input and set the filter */
+ tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC2S)) & ((uint16_t)~((uint16_t)TIM_CCMR1_IC2F)));
+ tmpccmr1 |= (uint16_t)(TIM_ICFilter << 12);
+ tmpccmr1 |= (uint16_t)(TIM_ICSelection << 8);
+
+ if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+ (TIMx == TIM4) ||(TIMx == TIM5))
+ {
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC2P));
+ tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC2E);
+ }
+ else
+ {
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC2P | TIM_CCER_CC2NP));
+ tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC2E);
+ }
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI3 as Input.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4.
+ * @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter)
+{
+ uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0;
+ /* Disable the Channel 3: Reset the CC3E Bit */
+ TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC3E);
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+ tmp = (uint16_t)(TIM_ICPolarity << 8);
+ /* Select the Input and set the filter */
+ tmpccmr2 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR2_CC3S)) & ((uint16_t)~((uint16_t)TIM_CCMR2_IC3F)));
+ tmpccmr2 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4));
+
+ if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+ (TIMx == TIM4) ||(TIMx == TIM5))
+ {
+ /* Select the Polarity and set the CC3E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P));
+ tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC3E);
+ }
+ else
+ {
+ /* Select the Polarity and set the CC3E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P | TIM_CCER_CC3NP));
+ tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC3E);
+ }
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI4 as Input.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3.
+ * @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter)
+{
+ uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC4E);
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+ tmp = (uint16_t)(TIM_ICPolarity << 12);
+ /* Select the Input and set the filter */
+ tmpccmr2 &= (uint16_t)((uint16_t)(~(uint16_t)TIM_CCMR2_CC4S) & ((uint16_t)~((uint16_t)TIM_CCMR2_IC4F)));
+ tmpccmr2 |= (uint16_t)(TIM_ICSelection << 8);
+ tmpccmr2 |= (uint16_t)(TIM_ICFilter << 12);
+
+ if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+ (TIMx == TIM4) ||(TIMx == TIM5))
+ {
+ /* Select the Polarity and set the CC4E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC4P));
+ tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC4E);
+ }
+ else
+ {
+ /* Select the Polarity and set the CC4E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P | TIM_CCER_CC4NP));
+ tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC4E);
+ }
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_usart.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_usart.c
new file mode 100644
index 00000000..a3f16f15
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_usart.c
@@ -0,0 +1,1058 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_usart.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the USART firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_usart.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup USART
+ * @brief USART driver modules
+ * @{
+ */
+
+/** @defgroup USART_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Private_Defines
+ * @{
+ */
+
+#define CR1_UE_Set ((uint16_t)0x2000) /*!< USART Enable Mask */
+#define CR1_UE_Reset ((uint16_t)0xDFFF) /*!< USART Disable Mask */
+
+#define CR1_WAKE_Mask ((uint16_t)0xF7FF) /*!< USART WakeUp Method Mask */
+
+#define CR1_RWU_Set ((uint16_t)0x0002) /*!< USART mute mode Enable Mask */
+#define CR1_RWU_Reset ((uint16_t)0xFFFD) /*!< USART mute mode Enable Mask */
+#define CR1_SBK_Set ((uint16_t)0x0001) /*!< USART Break Character send Mask */
+#define CR1_CLEAR_Mask ((uint16_t)0xE9F3) /*!< USART CR1 Mask */
+#define CR2_Address_Mask ((uint16_t)0xFFF0) /*!< USART address Mask */
+
+#define CR2_LINEN_Set ((uint16_t)0x4000) /*!< USART LIN Enable Mask */
+#define CR2_LINEN_Reset ((uint16_t)0xBFFF) /*!< USART LIN Disable Mask */
+
+#define CR2_LBDL_Mask ((uint16_t)0xFFDF) /*!< USART LIN Break detection Mask */
+#define CR2_STOP_CLEAR_Mask ((uint16_t)0xCFFF) /*!< USART CR2 STOP Bits Mask */
+#define CR2_CLOCK_CLEAR_Mask ((uint16_t)0xF0FF) /*!< USART CR2 Clock Mask */
+
+#define CR3_SCEN_Set ((uint16_t)0x0020) /*!< USART SC Enable Mask */
+#define CR3_SCEN_Reset ((uint16_t)0xFFDF) /*!< USART SC Disable Mask */
+
+#define CR3_NACK_Set ((uint16_t)0x0010) /*!< USART SC NACK Enable Mask */
+#define CR3_NACK_Reset ((uint16_t)0xFFEF) /*!< USART SC NACK Disable Mask */
+
+#define CR3_HDSEL_Set ((uint16_t)0x0008) /*!< USART Half-Duplex Enable Mask */
+#define CR3_HDSEL_Reset ((uint16_t)0xFFF7) /*!< USART Half-Duplex Disable Mask */
+
+#define CR3_IRLP_Mask ((uint16_t)0xFFFB) /*!< USART IrDA LowPower mode Mask */
+#define CR3_CLEAR_Mask ((uint16_t)0xFCFF) /*!< USART CR3 Mask */
+
+#define CR3_IREN_Set ((uint16_t)0x0002) /*!< USART IrDA Enable Mask */
+#define CR3_IREN_Reset ((uint16_t)0xFFFD) /*!< USART IrDA Disable Mask */
+#define GTPR_LSB_Mask ((uint16_t)0x00FF) /*!< Guard Time Register LSB Mask */
+#define GTPR_MSB_Mask ((uint16_t)0xFF00) /*!< Guard Time Register MSB Mask */
+#define IT_Mask ((uint16_t)0x001F) /*!< USART Interrupt Mask */
+
+/* USART OverSampling-8 Mask */
+#define CR1_OVER8_Set ((u16)0x8000) /* USART OVER8 mode Enable Mask */
+#define CR1_OVER8_Reset ((u16)0x7FFF) /* USART OVER8 mode Disable Mask */
+
+/* USART One Bit Sampling Mask */
+#define CR3_ONEBITE_Set ((u16)0x0800) /* USART ONEBITE mode Enable Mask */
+#define CR3_ONEBITE_Reset ((u16)0xF7FF) /* USART ONEBITE mode Disable Mask */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the USARTx peripheral registers to their default reset values.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @retval None
+ */
+void USART_DeInit(USART_TypeDef* USARTx)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+
+ if (USARTx == USART1)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE);
+ }
+ else if (USARTx == USART2)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE);
+ }
+ else if (USARTx == USART3)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE);
+ }
+ else if (USARTx == UART4)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE);
+ }
+ else
+ {
+ if (USARTx == UART5)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, DISABLE);
+ }
+ }
+}
+
+/**
+ * @brief Initializes the USARTx peripheral according to the specified
+ * parameters in the USART_InitStruct .
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_InitStruct: pointer to a USART_InitTypeDef structure
+ * that contains the configuration information for the specified USART
+ * peripheral.
+ * @retval None
+ */
+void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct)
+{
+ uint32_t tmpreg = 0x00, apbclock = 0x00;
+ uint32_t integerdivider = 0x00;
+ uint32_t fractionaldivider = 0x00;
+ uint32_t usartxbase = 0;
+ RCC_ClocksTypeDef RCC_ClocksStatus;
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate));
+ assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength));
+ assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits));
+ assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity));
+ assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode));
+ assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl));
+ /* The hardware flow control is available only for USART1, USART2 and USART3 */
+ if (USART_InitStruct->USART_HardwareFlowControl != USART_HardwareFlowControl_None)
+ {
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ }
+
+ usartxbase = (uint32_t)USARTx;
+
+/*---------------------------- USART CR2 Configuration -----------------------*/
+ tmpreg = USARTx->CR2;
+ /* Clear STOP[13:12] bits */
+ tmpreg &= CR2_STOP_CLEAR_Mask;
+ /* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit ------------*/
+ /* Set STOP[13:12] bits according to USART_StopBits value */
+ tmpreg |= (uint32_t)USART_InitStruct->USART_StopBits;
+
+ /* Write to USART CR2 */
+ USARTx->CR2 = (uint16_t)tmpreg;
+
+/*---------------------------- USART CR1 Configuration -----------------------*/
+ tmpreg = USARTx->CR1;
+ /* Clear M, PCE, PS, TE and RE bits */
+ tmpreg &= CR1_CLEAR_Mask;
+ /* Configure the USART Word Length, Parity and mode ----------------------- */
+ /* Set the M bits according to USART_WordLength value */
+ /* Set PCE and PS bits according to USART_Parity value */
+ /* Set TE and RE bits according to USART_Mode value */
+ tmpreg |= (uint32_t)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity |
+ USART_InitStruct->USART_Mode;
+ /* Write to USART CR1 */
+ USARTx->CR1 = (uint16_t)tmpreg;
+
+/*---------------------------- USART CR3 Configuration -----------------------*/
+ tmpreg = USARTx->CR3;
+ /* Clear CTSE and RTSE bits */
+ tmpreg &= CR3_CLEAR_Mask;
+ /* Configure the USART HFC -------------------------------------------------*/
+ /* Set CTSE and RTSE bits according to USART_HardwareFlowControl value */
+ tmpreg |= USART_InitStruct->USART_HardwareFlowControl;
+ /* Write to USART CR3 */
+ USARTx->CR3 = (uint16_t)tmpreg;
+
+/*---------------------------- USART BRR Configuration -----------------------*/
+ /* Configure the USART Baud Rate -------------------------------------------*/
+ RCC_GetClocksFreq(&RCC_ClocksStatus);
+ if (usartxbase == USART1_BASE)
+ {
+ apbclock = RCC_ClocksStatus.PCLK2_Frequency;
+ }
+ else
+ {
+ apbclock = RCC_ClocksStatus.PCLK1_Frequency;
+ }
+
+ /* Determine the integer part */
+ if ((USARTx->CR1 & CR1_OVER8_Set) != 0)
+ {
+ /* Integer part computing in case Oversampling mode is 8 Samples */
+ integerdivider = ((25 * apbclock) / (2 * (USART_InitStruct->USART_BaudRate)));
+ }
+ else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */
+ {
+ /* Integer part computing in case Oversampling mode is 16 Samples */
+ integerdivider = ((25 * apbclock) / (4 * (USART_InitStruct->USART_BaudRate)));
+ }
+ tmpreg = (integerdivider / 100) << 4;
+
+ /* Determine the fractional part */
+ fractionaldivider = integerdivider - (100 * (tmpreg >> 4));
+
+ /* Implement the fractional part in the register */
+ if ((USARTx->CR1 & CR1_OVER8_Set) != 0)
+ {
+ tmpreg |= ((((fractionaldivider * 8) + 50) / 100)) & ((uint8_t)0x07);
+ }
+ else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */
+ {
+ tmpreg |= ((((fractionaldivider * 16) + 50) / 100)) & ((uint8_t)0x0F);
+ }
+
+ /* Write to USART BRR */
+ USARTx->BRR = (uint16_t)tmpreg;
+}
+
+/**
+ * @brief Fills each USART_InitStruct member with its default value.
+ * @param USART_InitStruct: pointer to a USART_InitTypeDef structure
+ * which will be initialized.
+ * @retval None
+ */
+void USART_StructInit(USART_InitTypeDef* USART_InitStruct)
+{
+ /* USART_InitStruct members default value */
+ USART_InitStruct->USART_BaudRate = 9600;
+ USART_InitStruct->USART_WordLength = USART_WordLength_8b;
+ USART_InitStruct->USART_StopBits = USART_StopBits_1;
+ USART_InitStruct->USART_Parity = USART_Parity_No ;
+ USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
+ USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+}
+
+/**
+ * @brief Initializes the USARTx peripheral Clock according to the
+ * specified parameters in the USART_ClockInitStruct .
+ * @param USARTx: where x can be 1, 2, 3 to select the USART peripheral.
+ * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef
+ * structure that contains the configuration information for the specified
+ * USART peripheral.
+ * @note The Smart Card and Synchronous modes are not available for UART4 and UART5.
+ * @retval None
+ */
+void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct)
+{
+ uint32_t tmpreg = 0x00;
+ /* Check the parameters */
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock));
+ assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL));
+ assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA));
+ assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit));
+
+/*---------------------------- USART CR2 Configuration -----------------------*/
+ tmpreg = USARTx->CR2;
+ /* Clear CLKEN, CPOL, CPHA and LBCL bits */
+ tmpreg &= CR2_CLOCK_CLEAR_Mask;
+ /* Configure the USART Clock, CPOL, CPHA and LastBit ------------*/
+ /* Set CLKEN bit according to USART_Clock value */
+ /* Set CPOL bit according to USART_CPOL value */
+ /* Set CPHA bit according to USART_CPHA value */
+ /* Set LBCL bit according to USART_LastBit value */
+ tmpreg |= (uint32_t)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL |
+ USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit;
+ /* Write to USART CR2 */
+ USARTx->CR2 = (uint16_t)tmpreg;
+}
+
+/**
+ * @brief Fills each USART_ClockInitStruct member with its default value.
+ * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef
+ * structure which will be initialized.
+ * @retval None
+ */
+void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct)
+{
+ /* USART_ClockInitStruct members default value */
+ USART_ClockInitStruct->USART_Clock = USART_Clock_Disable;
+ USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low;
+ USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge;
+ USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable;
+}
+
+/**
+ * @brief Enables or disables the specified USART peripheral.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the USARTx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected USART by setting the UE bit in the CR1 register */
+ USARTx->CR1 |= CR1_UE_Set;
+ }
+ else
+ {
+ /* Disable the selected USART by clearing the UE bit in the CR1 register */
+ USARTx->CR1 &= CR1_UE_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified USART interrupts.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_IT: specifies the USART interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg USART_IT_LBD: LIN Break detection interrupt
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @param NewState: new state of the specified USARTx interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState)
+{
+ uint32_t usartreg = 0x00, itpos = 0x00, itmask = 0x00;
+ uint32_t usartxbase = 0x00;
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_CONFIG_IT(USART_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ /* The CTS interrupt is not available for UART4 and UART5 */
+ if (USART_IT == USART_IT_CTS)
+ {
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ }
+
+ usartxbase = (uint32_t)USARTx;
+
+ /* Get the USART register index */
+ usartreg = (((uint8_t)USART_IT) >> 0x05);
+
+ /* Get the interrupt position */
+ itpos = USART_IT & IT_Mask;
+ itmask = (((uint32_t)0x01) << itpos);
+
+ if (usartreg == 0x01) /* The IT is in CR1 register */
+ {
+ usartxbase += 0x0C;
+ }
+ else if (usartreg == 0x02) /* The IT is in CR2 register */
+ {
+ usartxbase += 0x10;
+ }
+ else /* The IT is in CR3 register */
+ {
+ usartxbase += 0x14;
+ }
+ if (NewState != DISABLE)
+ {
+ *(__IO uint32_t*)usartxbase |= itmask;
+ }
+ else
+ {
+ *(__IO uint32_t*)usartxbase &= ~itmask;
+ }
+}
+
+/**
+ * @brief Enables or disables the USART’s DMA interface.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_DMAReq: specifies the DMA request.
+ * This parameter can be any combination of the following values:
+ * @arg USART_DMAReq_Tx: USART DMA transmit request
+ * @arg USART_DMAReq_Rx: USART DMA receive request
+ * @param NewState: new state of the DMA Request sources.
+ * This parameter can be: ENABLE or DISABLE.
+ * @note The DMA mode is not available for UART5 except in the STM32
+ * High density value line devices(STM32F10X_HD_VL).
+ * @retval None
+ */
+void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_DMAREQ(USART_DMAReq));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the DMA transfer for selected requests by setting the DMAT and/or
+ DMAR bits in the USART CR3 register */
+ USARTx->CR3 |= USART_DMAReq;
+ }
+ else
+ {
+ /* Disable the DMA transfer for selected requests by clearing the DMAT and/or
+ DMAR bits in the USART CR3 register */
+ USARTx->CR3 &= (uint16_t)~USART_DMAReq;
+ }
+}
+
+/**
+ * @brief Sets the address of the USART node.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_Address: Indicates the address of the USART node.
+ * @retval None
+ */
+void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_ADDRESS(USART_Address));
+
+ /* Clear the USART address */
+ USARTx->CR2 &= CR2_Address_Mask;
+ /* Set the USART address node */
+ USARTx->CR2 |= USART_Address;
+}
+
+/**
+ * @brief Selects the USART WakeUp method.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_WakeUp: specifies the USART wakeup method.
+ * This parameter can be one of the following values:
+ * @arg USART_WakeUp_IdleLine: WakeUp by an idle line detection
+ * @arg USART_WakeUp_AddressMark: WakeUp by an address mark
+ * @retval None
+ */
+void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_WAKEUP(USART_WakeUp));
+
+ USARTx->CR1 &= CR1_WAKE_Mask;
+ USARTx->CR1 |= USART_WakeUp;
+}
+
+/**
+ * @brief Determines if the USART is in mute mode or not.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the USART mute mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the USART mute mode by setting the RWU bit in the CR1 register */
+ USARTx->CR1 |= CR1_RWU_Set;
+ }
+ else
+ {
+ /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */
+ USARTx->CR1 &= CR1_RWU_Reset;
+ }
+}
+
+/**
+ * @brief Sets the USART LIN Break detection length.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_LINBreakDetectLength: specifies the LIN break detection length.
+ * This parameter can be one of the following values:
+ * @arg USART_LINBreakDetectLength_10b: 10-bit break detection
+ * @arg USART_LINBreakDetectLength_11b: 11-bit break detection
+ * @retval None
+ */
+void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_LIN_BREAK_DETECT_LENGTH(USART_LINBreakDetectLength));
+
+ USARTx->CR2 &= CR2_LBDL_Mask;
+ USARTx->CR2 |= USART_LINBreakDetectLength;
+}
+
+/**
+ * @brief Enables or disables the USART’s LIN mode.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the USART LIN mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the LIN mode by setting the LINEN bit in the CR2 register */
+ USARTx->CR2 |= CR2_LINEN_Set;
+ }
+ else
+ {
+ /* Disable the LIN mode by clearing the LINEN bit in the CR2 register */
+ USARTx->CR2 &= CR2_LINEN_Reset;
+ }
+}
+
+/**
+ * @brief Transmits single data through the USARTx peripheral.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param Data: the data to transmit.
+ * @retval None
+ */
+void USART_SendData(USART_TypeDef* USARTx, uint16_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_DATA(Data));
+
+ /* Transmit Data */
+ USARTx->DR = (Data & (uint16_t)0x01FF);
+}
+
+/**
+ * @brief Returns the most recent received data by the USARTx peripheral.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @retval The received data.
+ */
+uint16_t USART_ReceiveData(USART_TypeDef* USARTx)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+
+ /* Receive Data */
+ return (uint16_t)(USARTx->DR & (uint16_t)0x01FF);
+}
+
+/**
+ * @brief Transmits break characters.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @retval None
+ */
+void USART_SendBreak(USART_TypeDef* USARTx)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+
+ /* Send break characters */
+ USARTx->CR1 |= CR1_SBK_Set;
+}
+
+/**
+ * @brief Sets the specified USART guard time.
+ * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral.
+ * @param USART_GuardTime: specifies the guard time.
+ * @note The guard time bits are not available for UART4 and UART5.
+ * @retval None
+ */
+void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_123_PERIPH(USARTx));
+
+ /* Clear the USART Guard time */
+ USARTx->GTPR &= GTPR_LSB_Mask;
+ /* Set the USART guard time */
+ USARTx->GTPR |= (uint16_t)((uint16_t)USART_GuardTime << 0x08);
+}
+
+/**
+ * @brief Sets the system clock prescaler.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_Prescaler: specifies the prescaler clock.
+ * @note The function is used for IrDA mode with UART4 and UART5.
+ * @retval None
+ */
+void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+
+ /* Clear the USART prescaler */
+ USARTx->GTPR &= GTPR_MSB_Mask;
+ /* Set the USART prescaler */
+ USARTx->GTPR |= USART_Prescaler;
+}
+
+/**
+ * @brief Enables or disables the USART’s Smart Card mode.
+ * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral.
+ * @param NewState: new state of the Smart Card mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @note The Smart Card mode is not available for UART4 and UART5.
+ * @retval None
+ */
+void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the SC mode by setting the SCEN bit in the CR3 register */
+ USARTx->CR3 |= CR3_SCEN_Set;
+ }
+ else
+ {
+ /* Disable the SC mode by clearing the SCEN bit in the CR3 register */
+ USARTx->CR3 &= CR3_SCEN_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables NACK transmission.
+ * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral.
+ * @param NewState: new state of the NACK transmission.
+ * This parameter can be: ENABLE or DISABLE.
+ * @note The Smart Card mode is not available for UART4 and UART5.
+ * @retval None
+ */
+void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the NACK transmission by setting the NACK bit in the CR3 register */
+ USARTx->CR3 |= CR3_NACK_Set;
+ }
+ else
+ {
+ /* Disable the NACK transmission by clearing the NACK bit in the CR3 register */
+ USARTx->CR3 &= CR3_NACK_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the USART’s Half Duplex communication.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the USART Communication.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */
+ USARTx->CR3 |= CR3_HDSEL_Set;
+ }
+ else
+ {
+ /* Disable the Half-Duplex mode by clearing the HDSEL bit in the CR3 register */
+ USARTx->CR3 &= CR3_HDSEL_Reset;
+ }
+}
+
+
+/**
+ * @brief Enables or disables the USART's 8x oversampling mode.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the USART one bit sampling method.
+ * This parameter can be: ENABLE or DISABLE.
+ * @note
+ * This function has to be called before calling USART_Init()
+ * function in order to have correct baudrate Divider value.
+ * @retval None
+ */
+void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the 8x Oversampling mode by setting the OVER8 bit in the CR1 register */
+ USARTx->CR1 |= CR1_OVER8_Set;
+ }
+ else
+ {
+ /* Disable the 8x Oversampling mode by clearing the OVER8 bit in the CR1 register */
+ USARTx->CR1 &= CR1_OVER8_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the USART's one bit sampling method.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the USART one bit sampling method.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the one bit method by setting the ONEBITE bit in the CR3 register */
+ USARTx->CR3 |= CR3_ONEBITE_Set;
+ }
+ else
+ {
+ /* Disable tthe one bit method by clearing the ONEBITE bit in the CR3 register */
+ USARTx->CR3 &= CR3_ONEBITE_Reset;
+ }
+}
+
+/**
+ * @brief Configures the USART's IrDA interface.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_IrDAMode: specifies the IrDA mode.
+ * This parameter can be one of the following values:
+ * @arg USART_IrDAMode_LowPower
+ * @arg USART_IrDAMode_Normal
+ * @retval None
+ */
+void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_IRDA_MODE(USART_IrDAMode));
+
+ USARTx->CR3 &= CR3_IRLP_Mask;
+ USARTx->CR3 |= USART_IrDAMode;
+}
+
+/**
+ * @brief Enables or disables the USART's IrDA interface.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the IrDA mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the IrDA mode by setting the IREN bit in the CR3 register */
+ USARTx->CR3 |= CR3_IREN_Set;
+ }
+ else
+ {
+ /* Disable the IrDA mode by clearing the IREN bit in the CR3 register */
+ USARTx->CR3 &= CR3_IREN_Reset;
+ }
+}
+
+/**
+ * @brief Checks whether the specified USART flag is set or not.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
+ * @arg USART_FLAG_LBD: LIN Break detection flag
+ * @arg USART_FLAG_TXE: Transmit data register empty flag
+ * @arg USART_FLAG_TC: Transmission Complete flag
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag
+ * @arg USART_FLAG_IDLE: Idle Line detection flag
+ * @arg USART_FLAG_ORE: OverRun Error flag
+ * @arg USART_FLAG_NE: Noise Error flag
+ * @arg USART_FLAG_FE: Framing Error flag
+ * @arg USART_FLAG_PE: Parity Error flag
+ * @retval The new state of USART_FLAG (SET or RESET).
+ */
+FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_FLAG(USART_FLAG));
+ /* The CTS flag is not available for UART4 and UART5 */
+ if (USART_FLAG == USART_FLAG_CTS)
+ {
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ }
+
+ if ((USARTx->SR & USART_FLAG) != (uint16_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the USARTx's pending flags.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_FLAG: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5).
+ * @arg USART_FLAG_LBD: LIN Break detection flag.
+ * @arg USART_FLAG_TC: Transmission Complete flag.
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note
+ * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register (USART_GetFlagStatus())
+ * followed by a read operation to USART_DR register (USART_ReceiveData()).
+ * - RXNE flag can be also cleared by a read to the USART_DR register
+ * (USART_ReceiveData()).
+ * - TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register (USART_GetFlagStatus()) followed by a write operation
+ * to USART_DR register (USART_SendData()).
+ * - TXE flag is cleared only by a write to the USART_DR register
+ * (USART_SendData()).
+ * @retval None
+ */
+void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_CLEAR_FLAG(USART_FLAG));
+ /* The CTS flag is not available for UART4 and UART5 */
+ if ((USART_FLAG & USART_FLAG_CTS) == USART_FLAG_CTS)
+ {
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ }
+
+ USARTx->SR = (uint16_t)~USART_FLAG;
+}
+
+/**
+ * @brief Checks whether the specified USART interrupt has occurred or not.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_IT: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg USART_IT_LBD: LIN Break detection interrupt
+ * @arg USART_IT_TXE: Tansmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ORE: OverRun Error interrupt
+ * @arg USART_IT_NE: Noise Error interrupt
+ * @arg USART_IT_FE: Framing Error interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @retval The new state of USART_IT (SET or RESET).
+ */
+ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT)
+{
+ uint32_t bitpos = 0x00, itmask = 0x00, usartreg = 0x00;
+ ITStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_GET_IT(USART_IT));
+ /* The CTS interrupt is not available for UART4 and UART5 */
+ if (USART_IT == USART_IT_CTS)
+ {
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ }
+
+ /* Get the USART register index */
+ usartreg = (((uint8_t)USART_IT) >> 0x05);
+ /* Get the interrupt position */
+ itmask = USART_IT & IT_Mask;
+ itmask = (uint32_t)0x01 << itmask;
+
+ if (usartreg == 0x01) /* The IT is in CR1 register */
+ {
+ itmask &= USARTx->CR1;
+ }
+ else if (usartreg == 0x02) /* The IT is in CR2 register */
+ {
+ itmask &= USARTx->CR2;
+ }
+ else /* The IT is in CR3 register */
+ {
+ itmask &= USARTx->CR3;
+ }
+
+ bitpos = USART_IT >> 0x08;
+ bitpos = (uint32_t)0x01 << bitpos;
+ bitpos &= USARTx->SR;
+ if ((itmask != (uint16_t)RESET)&&(bitpos != (uint16_t)RESET))
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the USARTx's interrupt pending bits.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_IT: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg USART_IT_LBD: LIN Break detection interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt.
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt.
+ *
+ * @note
+ * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
+ * error) and IDLE (Idle line detected) pending bits are cleared by
+ * software sequence: a read operation to USART_SR register
+ * (USART_GetITStatus()) followed by a read operation to USART_DR register
+ * (USART_ReceiveData()).
+ * - RXNE pending bit can be also cleared by a read to the USART_DR register
+ * (USART_ReceiveData()).
+ * - TC pending bit can be also cleared by software sequence: a read
+ * operation to USART_SR register (USART_GetITStatus()) followed by a write
+ * operation to USART_DR register (USART_SendData()).
+ * - TXE pending bit is cleared only by a write to the USART_DR register
+ * (USART_SendData()).
+ * @retval None
+ */
+void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT)
+{
+ uint16_t bitpos = 0x00, itmask = 0x00;
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_CLEAR_IT(USART_IT));
+ /* The CTS interrupt is not available for UART4 and UART5 */
+ if (USART_IT == USART_IT_CTS)
+ {
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ }
+
+ bitpos = USART_IT >> 0x08;
+ itmask = ((uint16_t)0x01 << (uint16_t)bitpos);
+ USARTx->SR = (uint16_t)~itmask;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_wwdg.c b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_wwdg.c
new file mode 100644
index 00000000..77a7ce51
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/SPL/src/stm32f10x_wwdg.c
@@ -0,0 +1,224 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_wwdg.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the WWDG firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * © COPYRIGHT 2011 STMicroelectronics
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_wwdg.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup WWDG
+ * @brief WWDG driver modules
+ * @{
+ */
+
+/** @defgroup WWDG_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Private_Defines
+ * @{
+ */
+
+/* ----------- WWDG registers bit address in the alias region ----------- */
+#define WWDG_OFFSET (WWDG_BASE - PERIPH_BASE)
+
+/* Alias word address of EWI bit */
+#define CFR_OFFSET (WWDG_OFFSET + 0x04)
+#define EWI_BitNumber 0x09
+#define CFR_EWI_BB (PERIPH_BB_BASE + (CFR_OFFSET * 32) + (EWI_BitNumber * 4))
+
+/* --------------------- WWDG registers bit mask ------------------------ */
+
+/* CR register bit mask */
+#define CR_WDGA_Set ((uint32_t)0x00000080)
+
+/* CFR register bit mask */
+#define CFR_WDGTB_Mask ((uint32_t)0xFFFFFE7F)
+#define CFR_W_Mask ((uint32_t)0xFFFFFF80)
+#define BIT_Mask ((uint8_t)0x7F)
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the WWDG peripheral registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void WWDG_DeInit(void)
+{
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, DISABLE);
+}
+
+/**
+ * @brief Sets the WWDG Prescaler.
+ * @param WWDG_Prescaler: specifies the WWDG Prescaler.
+ * This parameter can be one of the following values:
+ * @arg WWDG_Prescaler_1: WWDG counter clock = (PCLK1/4096)/1
+ * @arg WWDG_Prescaler_2: WWDG counter clock = (PCLK1/4096)/2
+ * @arg WWDG_Prescaler_4: WWDG counter clock = (PCLK1/4096)/4
+ * @arg WWDG_Prescaler_8: WWDG counter clock = (PCLK1/4096)/8
+ * @retval None
+ */
+void WWDG_SetPrescaler(uint32_t WWDG_Prescaler)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_WWDG_PRESCALER(WWDG_Prescaler));
+ /* Clear WDGTB[1:0] bits */
+ tmpreg = WWDG->CFR & CFR_WDGTB_Mask;
+ /* Set WDGTB[1:0] bits according to WWDG_Prescaler value */
+ tmpreg |= WWDG_Prescaler;
+ /* Store the new value */
+ WWDG->CFR = tmpreg;
+}
+
+/**
+ * @brief Sets the WWDG window value.
+ * @param WindowValue: specifies the window value to be compared to the downcounter.
+ * This parameter value must be lower than 0x80.
+ * @retval None
+ */
+void WWDG_SetWindowValue(uint8_t WindowValue)
+{
+ __IO uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_WWDG_WINDOW_VALUE(WindowValue));
+ /* Clear W[6:0] bits */
+
+ tmpreg = WWDG->CFR & CFR_W_Mask;
+
+ /* Set W[6:0] bits according to WindowValue value */
+ tmpreg |= WindowValue & (uint32_t) BIT_Mask;
+
+ /* Store the new value */
+ WWDG->CFR = tmpreg;
+}
+
+/**
+ * @brief Enables the WWDG Early Wakeup interrupt(EWI).
+ * @param None
+ * @retval None
+ */
+void WWDG_EnableIT(void)
+{
+ *(__IO uint32_t *) CFR_EWI_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Sets the WWDG counter value.
+ * @param Counter: specifies the watchdog counter value.
+ * This parameter must be a number between 0x40 and 0x7F.
+ * @retval None
+ */
+void WWDG_SetCounter(uint8_t Counter)
+{
+ /* Check the parameters */
+ assert_param(IS_WWDG_COUNTER(Counter));
+ /* Write to T[6:0] bits to configure the counter value, no need to do
+ a read-modify-write; writing a 0 to WDGA bit does nothing */
+ WWDG->CR = Counter & BIT_Mask;
+}
+
+/**
+ * @brief Enables WWDG and load the counter value.
+ * @param Counter: specifies the watchdog counter value.
+ * This parameter must be a number between 0x40 and 0x7F.
+ * @retval None
+ */
+void WWDG_Enable(uint8_t Counter)
+{
+ /* Check the parameters */
+ assert_param(IS_WWDG_COUNTER(Counter));
+ WWDG->CR = CR_WDGA_Set | Counter;
+}
+
+/**
+ * @brief Checks whether the Early Wakeup interrupt flag is set or not.
+ * @param None
+ * @retval The new state of the Early Wakeup interrupt flag (SET or RESET)
+ */
+FlagStatus WWDG_GetFlagStatus(void)
+{
+ return (FlagStatus)(WWDG->SR);
+}
+
+/**
+ * @brief Clears Early Wakeup interrupt flag.
+ * @param None
+ * @retval None
+ */
+void WWDG_ClearFlag(void)
+{
+ WWDG->SR = (uint32_t)RESET;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/cmsis/core_cm3.h b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/cmsis/core_cm3.h
new file mode 100644
index 00000000..efac390f
--- /dev/null
+++ b/Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Prog/lib/cmsis/core_cm3.h
@@ -0,0 +1,1550 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V3.00
+ * @date 03. February 2012
+ *
+ * @note
+ * Copyright (C) 2009-2012 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** \ingroup Cortex_M3 + @{ + */ + +/* CMSIS CM3 definitions */ +#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \ + __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x03) /*!< Cortex-M Core */ + + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ + #define __STATIC_INLINE static inline + +#elif defined ( __TMS470__ ) + #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + #define __STATIC_INLINE static inline + +#endif + +/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all +*/ +#define __FPU_USED 0 + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TMS470__ ) + #if defined __TI__VFP_SUPPORT____ + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + /* add preprocessor checks */ +#endif + +#include