/** ****************************************************************************** * @file stm32f1xx_hal_pcd.c * @author MCD Application Team * @brief PCD HAL module driver. * This file provides firmware functions to manage the following * functionalities of the USB Peripheral Controller: * + Initialization and de-initialization functions * + IO operation functions * + Peripheral Control functions * + Peripheral State functions * @verbatim ============================================================================== ##### How to use this driver ##### ============================================================================== [..] The PCD HAL driver can be used as follows: (#) Declare a PCD_HandleTypeDef handle structure, for example: PCD_HandleTypeDef hpcd; (#) Fill parameters of Init structure in HCD handle (#) Call HAL_PCD_Init() API to initialize the PCD peripheral (Core, Device core, ...) (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API: (##) Enable the PCD/USB Low Level interface clock using (+++) __HAL_RCC_USB_CLK_ENABLE(); For USB Device only FS peripheral (##) Initialize the related GPIO clocks (##) Configure PCD pin-out (##) Configure PCD NVIC interrupt (#)Associate the Upper USB device stack to the HAL PCD Driver: (##) hpcd.pData = pdev; (#)Enable PCD transmission and reception: (##) HAL_PCD_Start(); @endverbatim ****************************************************************************** * @attention * *

© Copyright (c) 2016 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32f1xx_hal.h" /** @addtogroup STM32F1xx_HAL_Driver * @{ */ /** @defgroup PCD PCD * @brief PCD HAL module driver * @{ */ #ifdef HAL_PCD_MODULE_ENABLED #if defined (USB) || defined (USB_OTG_FS) /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /* Private macros ------------------------------------------------------------*/ /** @defgroup PCD_Private_Macros PCD Private Macros * @{ */ #define PCD_MIN(a, b) (((a) < (b)) ? (a) : (b)) #define PCD_MAX(a, b) (((a) > (b)) ? (a) : (b)) /** * @} */ /* Private functions prototypes ----------------------------------------------*/ /** @defgroup PCD_Private_Functions PCD Private Functions * @{ */ #if defined (USB_OTG_FS) static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum); static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint32_t epnum); static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint32_t epnum); #endif /* defined (USB_OTG_FS) */ #if defined (USB) static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd); static HAL_StatusTypeDef HAL_PCD_EP_DB_Transmit(PCD_HandleTypeDef *hpcd, PCD_EPTypeDef *ep, uint16_t wEPVal); static uint16_t HAL_PCD_EP_DB_Receive(PCD_HandleTypeDef *hpcd, PCD_EPTypeDef *ep, uint16_t wEPVal); #endif /* defined (USB) */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @defgroup PCD_Exported_Functions PCD Exported Functions * @{ */ /** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions * @brief Initialization and Configuration functions * @verbatim =============================================================================== ##### Initialization and de-initialization functions ##### =============================================================================== [..] This section provides functions allowing to: @endverbatim * @{ */ /** * @brief Initializes the PCD according to the specified * parameters in the PCD_InitTypeDef and initialize the associated handle. * @param hpcd PCD handle * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) { #if defined (USB_OTG_FS) USB_OTG_GlobalTypeDef *USBx; #endif /* defined (USB_OTG_FS) */ uint8_t i; /* Check the PCD handle allocation */ if (hpcd == NULL) { return HAL_ERROR; } /* Check the parameters */ assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance)); #if defined (USB_OTG_FS) USBx = hpcd->Instance; #endif /* defined (USB_OTG_FS) */ if (hpcd->State == HAL_PCD_STATE_RESET) { /* Allocate lock resource and initialize it */ hpcd->Lock = HAL_UNLOCKED; #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->SOFCallback = HAL_PCD_SOFCallback; hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; hpcd->ResetCallback = HAL_PCD_ResetCallback; hpcd->SuspendCallback = HAL_PCD_SuspendCallback; hpcd->ResumeCallback = HAL_PCD_ResumeCallback; hpcd->ConnectCallback = HAL_PCD_ConnectCallback; hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; if (hpcd->MspInitCallback == NULL) { hpcd->MspInitCallback = HAL_PCD_MspInit; } /* Init the low level hardware */ hpcd->MspInitCallback(hpcd); #else /* Init the low level hardware : GPIO, CLOCK, NVIC... */ HAL_PCD_MspInit(hpcd); #endif /* (USE_HAL_PCD_REGISTER_CALLBACKS) */ } hpcd->State = HAL_PCD_STATE_BUSY; #if defined (USB_OTG_FS) /* Disable DMA mode for FS instance */ if ((USBx->CID & (0x1U << 8)) == 0U) { hpcd->Init.dma_enable = 0U; } #endif /* defined (USB_OTG_FS) */ /* Disable the Interrupts */ __HAL_PCD_DISABLE(hpcd); /*Init the Core (common init.) */ if (USB_CoreInit(hpcd->Instance, hpcd->Init) != HAL_OK) { hpcd->State = HAL_PCD_STATE_ERROR; return HAL_ERROR; } /* Force Device Mode*/ (void)USB_SetCurrentMode(hpcd->Instance, USB_DEVICE_MODE); /* Init endpoints structures */ for (i = 0U; i < hpcd->Init.dev_endpoints; i++) { /* Init ep structure */ hpcd->IN_ep[i].is_in = 1U; hpcd->IN_ep[i].num = i; hpcd->IN_ep[i].tx_fifo_num = i; /* Control until ep is activated */ hpcd->IN_ep[i].type = EP_TYPE_CTRL; hpcd->IN_ep[i].maxpacket = 0U; hpcd->IN_ep[i].xfer_buff = 0U; hpcd->IN_ep[i].xfer_len = 0U; } for (i = 0U; i < hpcd->Init.dev_endpoints; i++) { hpcd->OUT_ep[i].is_in = 0U; hpcd->OUT_ep[i].num = i; /* Control until ep is activated */ hpcd->OUT_ep[i].type = EP_TYPE_CTRL; hpcd->OUT_ep[i].maxpacket = 0U; hpcd->OUT_ep[i].xfer_buff = 0U; hpcd->OUT_ep[i].xfer_len = 0U; } /* Init Device */ if (USB_DevInit(hpcd->Instance, hpcd->Init) != HAL_OK) { hpcd->State = HAL_PCD_STATE_ERROR; return HAL_ERROR; } hpcd->USB_Address = 0U; hpcd->State = HAL_PCD_STATE_READY; (void)USB_DevDisconnect(hpcd->Instance); return HAL_OK; } /** * @brief DeInitializes the PCD peripheral. * @param hpcd PCD handle * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd) { /* Check the PCD handle allocation */ if (hpcd == NULL) { return HAL_ERROR; } hpcd->State = HAL_PCD_STATE_BUSY; /* Stop Device */ if (USB_StopDevice(hpcd->Instance) != HAL_OK) { return HAL_ERROR; } #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) if (hpcd->MspDeInitCallback == NULL) { hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; /* Legacy weak MspDeInit */ } /* DeInit the low level hardware */ hpcd->MspDeInitCallback(hpcd); #else /* DeInit the low level hardware: CLOCK, NVIC.*/ HAL_PCD_MspDeInit(hpcd); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ hpcd->State = HAL_PCD_STATE_RESET; return HAL_OK; } /** * @brief Initializes the PCD MSP. * @param hpcd PCD handle * @retval None */ __weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd) { /* Prevent unused argument(s) compilation warning */ UNUSED(hpcd); /* NOTE : This function should not be modified, when the callback is needed, the HAL_PCD_MspInit could be implemented in the user file */ } /** * @brief DeInitializes PCD MSP. * @param hpcd PCD handle * @retval None */ __weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd) { /* Prevent unused argument(s) compilation warning */ UNUSED(hpcd); /* NOTE : This function should not be modified, when the callback is needed, the HAL_PCD_MspDeInit could be implemented in the user file */ } #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) /** * @brief Register a User USB PCD Callback * To be used instead of the weak predefined callback * @param hpcd USB PCD handle * @param CallbackID ID of the callback to be registered * This parameter can be one of the following values: * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID * @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID * @param pCallback pointer to the Callback function * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, pPCD_CallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; if (pCallback == NULL) { /* Update the error code */ hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; return HAL_ERROR; } /* Process locked */ __HAL_LOCK(hpcd); if (hpcd->State == HAL_PCD_STATE_READY) { switch (CallbackID) { case HAL_PCD_SOF_CB_ID : hpcd->SOFCallback = pCallback; break; case HAL_PCD_SETUPSTAGE_CB_ID : hpcd->SetupStageCallback = pCallback; break; case HAL_PCD_RESET_CB_ID : hpcd->ResetCallback = pCallback; break; case HAL_PCD_SUSPEND_CB_ID : hpcd->SuspendCallback = pCallback; break; case HAL_PCD_RESUME_CB_ID : hpcd->ResumeCallback = pCallback; break; case HAL_PCD_CONNECT_CB_ID : hpcd->ConnectCallback = pCallback; break; case HAL_PCD_DISCONNECT_CB_ID : hpcd->DisconnectCallback = pCallback; break; case HAL_PCD_MSPINIT_CB_ID : hpcd->MspInitCallback = pCallback; break; case HAL_PCD_MSPDEINIT_CB_ID : hpcd->MspDeInitCallback = pCallback; break; default : /* Update the error code */ hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; break; } } else if (hpcd->State == HAL_PCD_STATE_RESET) { switch (CallbackID) { case HAL_PCD_MSPINIT_CB_ID : hpcd->MspInitCallback = pCallback; break; case HAL_PCD_MSPDEINIT_CB_ID : hpcd->MspDeInitCallback = pCallback; break; default : /* Update the error code */ hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; break; } } else { /* Update the error code */ hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; } /* Release Lock */ __HAL_UNLOCK(hpcd); return status; } /** * @brief Unregister an USB PCD Callback * USB PCD callabck is redirected to the weak predefined callback * @param hpcd USB PCD handle * @param CallbackID ID of the callback to be unregistered * This parameter can be one of the following values: * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID * @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID) { HAL_StatusTypeDef status = HAL_OK; /* Process locked */ __HAL_LOCK(hpcd); /* Setup Legacy weak Callbacks */ if (hpcd->State == HAL_PCD_STATE_READY) { switch (CallbackID) { case HAL_PCD_SOF_CB_ID : hpcd->SOFCallback = HAL_PCD_SOFCallback; break; case HAL_PCD_SETUPSTAGE_CB_ID : hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; break; case HAL_PCD_RESET_CB_ID : hpcd->ResetCallback = HAL_PCD_ResetCallback; break; case HAL_PCD_SUSPEND_CB_ID : hpcd->SuspendCallback = HAL_PCD_SuspendCallback; break; case HAL_PCD_RESUME_CB_ID : hpcd->ResumeCallback = HAL_PCD_ResumeCallback; break; case HAL_PCD_CONNECT_CB_ID : hpcd->ConnectCallback = HAL_PCD_ConnectCallback; break; case HAL_PCD_DISCONNECT_CB_ID : hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; break; case HAL_PCD_MSPINIT_CB_ID : hpcd->MspInitCallback = HAL_PCD_MspInit; break; case HAL_PCD_MSPDEINIT_CB_ID : hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; break; default : /* Update the error code */ hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; break; } } else if (hpcd->State == HAL_PCD_STATE_RESET) { switch (CallbackID) { case HAL_PCD_MSPINIT_CB_ID : hpcd->MspInitCallback = HAL_PCD_MspInit; break; case HAL_PCD_MSPDEINIT_CB_ID : hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; break; default : /* Update the error code */ hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; break; } } else { /* Update the error code */ hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; } /* Release Lock */ __HAL_UNLOCK(hpcd); return status; } /** * @brief Register USB PCD Data OUT Stage Callback * To be used instead of the weak HAL_PCD_DataOutStageCallback() predefined callback * @param hpcd PCD handle * @param pCallback pointer to the USB PCD Data OUT Stage Callback function * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataOutStageCallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; if (pCallback == NULL) { /* Update the error code */ hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; return HAL_ERROR; } /* Process locked */ __HAL_LOCK(hpcd); if (hpcd->State == HAL_PCD_STATE_READY) { hpcd->DataOutStageCallback = pCallback; } else { /* Update the error code */ hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; } /* Release Lock */ __HAL_UNLOCK(hpcd); return status; } /** * @brief Unregister the USB PCD Data OUT Stage Callback * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataOutStageCallback() predefined callback * @param hpcd PCD handle * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd) { HAL_StatusTypeDef status = HAL_OK; /* Process locked */ __HAL_LOCK(hpcd); if (hpcd->State == HAL_PCD_STATE_READY) { hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; /* Legacy weak DataOutStageCallback */ } else { /* Update the error code */ hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; } /* Release Lock */ __HAL_UNLOCK(hpcd); return status; } /** * @brief Register USB PCD Data IN Stage Callback * To be used instead of the weak HAL_PCD_DataInStageCallback() predefined callback * @param hpcd PCD handle * @param pCallback pointer to the USB PCD Data IN Stage Callback function * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataInStageCallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; if (pCallback == NULL) { /* Update the error code */ hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; return HAL_ERROR; } /* Process locked */ __HAL_LOCK(hpcd); if (hpcd->State == HAL_PCD_STATE_READY) { hpcd->DataInStageCallback = pCallback; } else { /* Update the error code */ hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; } /* Release Lock */ __HAL_UNLOCK(hpcd); return status; } /** * @brief Unregister the USB PCD Data IN Stage Callback * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataInStageCallback() predefined callback * @param hpcd PCD handle * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd) { HAL_StatusTypeDef status = HAL_OK; /* Process locked */ __HAL_LOCK(hpcd); if (hpcd->State == HAL_PCD_STATE_READY) { hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; /* Legacy weak DataInStageCallback */ } else { /* Update the error code */ hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; } /* Release Lock */ __HAL_UNLOCK(hpcd); return status; } /** * @brief Register USB PCD Iso OUT incomplete Callback * To be used instead of the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback * @param hpcd PCD handle * @param pCallback pointer to the USB PCD Iso OUT incomplete Callback function * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoOutIncpltCallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; if (pCallback == NULL) { /* Update the error code */ hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; return HAL_ERROR; } /* Process locked */ __HAL_LOCK(hpcd); if (hpcd->State == HAL_PCD_STATE_READY) { hpcd->ISOOUTIncompleteCallback = pCallback; } else { /* Update the error code */ hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; } /* Release Lock */ __HAL_UNLOCK(hpcd); return status; } /** * @brief Unregister the USB PCD Iso OUT incomplete Callback * USB PCD Iso OUT incomplete Callback is redirected to the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback * @param hpcd PCD handle * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd) { HAL_StatusTypeDef status = HAL_OK; /* Process locked */ __HAL_LOCK(hpcd); if (hpcd->State == HAL_PCD_STATE_READY) { hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; /* Legacy weak ISOOUTIncompleteCallback */ } else { /* Update the error code */ hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; } /* Release Lock */ __HAL_UNLOCK(hpcd); return status; } /** * @brief Register USB PCD Iso IN incomplete Callback * To be used instead of the weak HAL_PCD_ISOINIncompleteCallback() predefined callback * @param hpcd PCD handle * @param pCallback pointer to the USB PCD Iso IN incomplete Callback function * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoInIncpltCallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; if (pCallback == NULL) { /* Update the error code */ hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; return HAL_ERROR; } /* Process locked */ __HAL_LOCK(hpcd); if (hpcd->State == HAL_PCD_STATE_READY) { hpcd->ISOINIncompleteCallback = pCallback; } else { /* Update the error code */ hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; } /* Release Lock */ __HAL_UNLOCK(hpcd); return status; } /** * @brief Unregister the USB PCD Iso IN incomplete Callback * USB PCD Iso IN incomplete Callback is redirected to the weak HAL_PCD_ISOINIncompleteCallback() predefined callback * @param hpcd PCD handle * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd) { HAL_StatusTypeDef status = HAL_OK; /* Process locked */ __HAL_LOCK(hpcd); if (hpcd->State == HAL_PCD_STATE_READY) { hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; /* Legacy weak ISOINIncompleteCallback */ } else { /* Update the error code */ hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; } /* Release Lock */ __HAL_UNLOCK(hpcd); return status; } #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ /** * @} */ /** @defgroup PCD_Exported_Functions_Group2 Input and Output operation functions * @brief Data transfers functions * @verbatim =============================================================================== ##### IO operation functions ##### =============================================================================== [..] This subsection provides a set of functions allowing to manage the PCD data transfers. @endverbatim * @{ */ /** * @brief Start the USB device * @param hpcd PCD handle * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd) { __HAL_LOCK(hpcd); __HAL_PCD_ENABLE(hpcd); #if defined (USB) HAL_PCDEx_SetConnectionState(hpcd, 1U); #endif /* defined (USB) */ (void)USB_DevConnect(hpcd->Instance); __HAL_UNLOCK(hpcd); return HAL_OK; } /** * @brief Stop the USB device. * @param hpcd PCD handle * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd) { __HAL_LOCK(hpcd); __HAL_PCD_DISABLE(hpcd); #if defined (USB) HAL_PCDEx_SetConnectionState(hpcd, 0U); #endif /* defined (USB) */ (void)USB_DevDisconnect(hpcd->Instance); #if defined (USB_OTG_FS) (void)USB_FlushTxFifo(hpcd->Instance, 0x10U); #endif /* defined (USB_OTG_FS) */ __HAL_UNLOCK(hpcd); return HAL_OK; } #if defined (USB_OTG_FS) /** * @brief Handles PCD interrupt request. * @param hpcd PCD handle * @retval HAL status */ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) { USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; uint32_t USBx_BASE = (uint32_t)USBx; uint32_t i, ep_intr, epint, epnum; uint32_t fifoemptymsk, temp; USB_OTG_EPTypeDef *ep; /* ensure that we are in device mode */ if (USB_GetMode(hpcd->Instance) == USB_OTG_MODE_DEVICE) { /* avoid spurious interrupt */ if (__HAL_PCD_IS_INVALID_INTERRUPT(hpcd)) { return; } if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_MMIS)) { /* incorrect mode, acknowledge the interrupt */ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_MMIS); } /* Handle RxQLevel Interrupt */ if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_RXFLVL)) { USB_MASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); temp = USBx->GRXSTSP; ep = &hpcd->OUT_ep[temp & USB_OTG_GRXSTSP_EPNUM]; if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_DATA_UPDT) { if ((temp & USB_OTG_GRXSTSP_BCNT) != 0U) { (void)USB_ReadPacket(USBx, ep->xfer_buff, (uint16_t)((temp & USB_OTG_GRXSTSP_BCNT) >> 4)); ep->xfer_buff += (temp & USB_OTG_GRXSTSP_BCNT) >> 4; ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4; } } else if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_SETUP_UPDT) { (void)USB_ReadPacket(USBx, (uint8_t *)hpcd->Setup, 8U); ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4; } else { /* ... */ } USB_UNMASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); } if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OEPINT)) { epnum = 0U; /* Read in the device interrupt bits */ ep_intr = USB_ReadDevAllOutEpInterrupt(hpcd->Instance); while (ep_intr != 0U) { if ((ep_intr & 0x1U) != 0U) { epint = USB_ReadDevOutEPInterrupt(hpcd->Instance, (uint8_t)epnum); if ((epint & USB_OTG_DOEPINT_XFRC) == USB_OTG_DOEPINT_XFRC) { CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_XFRC); (void)PCD_EP_OutXfrComplete_int(hpcd, epnum); } if ((epint & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP) { CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP); /* Class B setup phase done for previous decoded setup */ (void)PCD_EP_OutSetupPacket_int(hpcd, epnum); } if ((epint & USB_OTG_DOEPINT_OTEPDIS) == USB_OTG_DOEPINT_OTEPDIS) { CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPDIS); } /* Clear Status Phase Received interrupt */ if ((epint & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) { CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); } /* Clear OUT NAK interrupt */ if ((epint & USB_OTG_DOEPINT_NAK) == USB_OTG_DOEPINT_NAK) { CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_NAK); } } epnum++; ep_intr >>= 1U; } } if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IEPINT)) { /* Read in the device interrupt bits */ ep_intr = USB_ReadDevAllInEpInterrupt(hpcd->Instance); epnum = 0U; while (ep_intr != 0U) { if ((ep_intr & 0x1U) != 0U) /* In ITR */ { epint = USB_ReadDevInEPInterrupt(hpcd->Instance, (uint8_t)epnum); if ((epint & USB_OTG_DIEPINT_XFRC) == USB_OTG_DIEPINT_XFRC) { fifoemptymsk = (uint32_t)(0x1UL << (epnum & EP_ADDR_MSK)); USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk; CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_XFRC); #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->DataInStageCallback(hpcd, (uint8_t)epnum); #else HAL_PCD_DataInStageCallback(hpcd, (uint8_t)epnum); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ } if ((epint & USB_OTG_DIEPINT_TOC) == USB_OTG_DIEPINT_TOC) { CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_TOC); } if ((epint & USB_OTG_DIEPINT_ITTXFE) == USB_OTG_DIEPINT_ITTXFE) { CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_ITTXFE); } if ((epint & USB_OTG_DIEPINT_INEPNE) == USB_OTG_DIEPINT_INEPNE) { CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_INEPNE); } if ((epint & USB_OTG_DIEPINT_EPDISD) == USB_OTG_DIEPINT_EPDISD) { CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_EPDISD); } if ((epint & USB_OTG_DIEPINT_TXFE) == USB_OTG_DIEPINT_TXFE) { (void)PCD_WriteEmptyTxFifo(hpcd, epnum); } } epnum++; ep_intr >>= 1U; } } /* Handle Resume Interrupt */ if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT)) { /* Clear the Remote Wake-up Signaling */ USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->ResumeCallback(hpcd); #else HAL_PCD_ResumeCallback(hpcd); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT); } /* Handle Suspend Interrupt */ if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP)) { if ((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS) { #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->SuspendCallback(hpcd); #else HAL_PCD_SuspendCallback(hpcd); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ } __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP); } /* Handle Reset Interrupt */ if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBRST)) { USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; (void)USB_FlushTxFifo(hpcd->Instance, 0x10U); for (i = 0U; i < hpcd->Init.dev_endpoints; i++) { USBx_INEP(i)->DIEPINT = 0xFB7FU; USBx_INEP(i)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL; USBx_INEP(i)->DIEPCTL |= USB_OTG_DIEPCTL_SNAK; USBx_OUTEP(i)->DOEPINT = 0xFB7FU; USBx_OUTEP(i)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL; USBx_OUTEP(i)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK; } USBx_DEVICE->DAINTMSK |= 0x10001U; if (hpcd->Init.use_dedicated_ep1 != 0U) { USBx_DEVICE->DOUTEP1MSK |= USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM; USBx_DEVICE->DINEP1MSK |= USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM; } else { USBx_DEVICE->DOEPMSK |= USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM | USB_OTG_DOEPMSK_OTEPSPRM | USB_OTG_DOEPMSK_NAKM; USBx_DEVICE->DIEPMSK |= USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM; } /* Set Default Address to 0 */ USBx_DEVICE->DCFG &= ~USB_OTG_DCFG_DAD; /* setup EP0 to receive SETUP packets */ (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t *)hpcd->Setup); __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBRST); } /* Handle Enumeration done Interrupt */ if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE)) { (void)USB_ActivateSetup(hpcd->Instance); hpcd->Init.speed = USB_GetDevSpeed(hpcd->Instance); /* Set USB Turnaround time */ (void)USB_SetTurnaroundTime(hpcd->Instance, HAL_RCC_GetHCLKFreq(), (uint8_t)hpcd->Init.speed); #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->ResetCallback(hpcd); #else HAL_PCD_ResetCallback(hpcd); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE); } /* Handle SOF Interrupt */ if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SOF)) { #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->SOFCallback(hpcd); #else HAL_PCD_SOFCallback(hpcd); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SOF); } /* Handle Incomplete ISO IN Interrupt */ if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR)) { /* Keep application checking the corresponding Iso IN endpoint causing the incomplete Interrupt */ epnum = 0U; #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->ISOINIncompleteCallback(hpcd, (uint8_t)epnum); #else HAL_PCD_ISOINIncompleteCallback(hpcd, (uint8_t)epnum); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR); } /* Handle Incomplete ISO OUT Interrupt */ if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT)) { /* Keep application checking the corresponding Iso OUT endpoint causing the incomplete Interrupt */ epnum = 0U; #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->ISOOUTIncompleteCallback(hpcd, (uint8_t)epnum); #else HAL_PCD_ISOOUTIncompleteCallback(hpcd, (uint8_t)epnum); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT); } /* Handle Connection event Interrupt */ if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT)) { #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->ConnectCallback(hpcd); #else HAL_PCD_ConnectCallback(hpcd); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT); } /* Handle Disconnection event Interrupt */ if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OTGINT)) { temp = hpcd->Instance->GOTGINT; if ((temp & USB_OTG_GOTGINT_SEDET) == USB_OTG_GOTGINT_SEDET) { #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->DisconnectCallback(hpcd); #else HAL_PCD_DisconnectCallback(hpcd); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ } hpcd->Instance->GOTGINT |= temp; } } } /** * @brief Handles PCD Wakeup interrupt request. * @param hpcd PCD handle * @retval HAL status */ void HAL_PCD_WKUP_IRQHandler(PCD_HandleTypeDef *hpcd) { /* Clear EXTI pending Bit */ __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG(); } #endif /* defined (USB_OTG_FS) */ #if defined (USB) /** * @brief This function handles PCD interrupt request. * @param hpcd PCD handle * @retval HAL status */ void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) { uint16_t store_ep[8]; uint8_t i; if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_CTR)) { /* servicing of the endpoint correct transfer interrupt */ /* clear of the CTR flag into the sub */ (void)PCD_EP_ISR_Handler(hpcd); } if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_RESET)) { __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_RESET); #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->ResetCallback(hpcd); #else HAL_PCD_ResetCallback(hpcd); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ (void)HAL_PCD_SetAddress(hpcd, 0U); } if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_PMAOVR)) { __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_PMAOVR); } if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_ERR)) { __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ERR); } if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_WKUP)) { hpcd->Instance->CNTR &= (uint16_t) ~(USB_CNTR_LP_MODE); hpcd->Instance->CNTR &= (uint16_t) ~(USB_CNTR_FSUSP); #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->ResumeCallback(hpcd); #else HAL_PCD_ResumeCallback(hpcd); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_WKUP); } if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_SUSP)) { /* WA: To Clear Wakeup flag if raised with suspend signal */ /* Store Endpoint register */ for (i = 0U; i < 8U; i++) { store_ep[i] = PCD_GET_ENDPOINT(hpcd->Instance, i); } /* FORCE RESET */ hpcd->Instance->CNTR |= (uint16_t)(USB_CNTR_FRES); /* CLEAR RESET */ hpcd->Instance->CNTR &= (uint16_t)(~USB_CNTR_FRES); /* wait for reset flag in ISTR */ while ((hpcd->Instance->ISTR & USB_ISTR_RESET) == 0U) { } /* Clear Reset Flag */ __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_RESET); /* Restore Registre */ for (i = 0U; i < 8U; i++) { PCD_SET_ENDPOINT(hpcd->Instance, i, store_ep[i]); } /* Force low-power mode in the macrocell */ hpcd->Instance->CNTR |= (uint16_t)USB_CNTR_FSUSP; /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */ __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SUSP); hpcd->Instance->CNTR |= (uint16_t)USB_CNTR_LP_MODE; #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->SuspendCallback(hpcd); #else HAL_PCD_SuspendCallback(hpcd); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ } if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_SOF)) { __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SOF); #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->SOFCallback(hpcd); #else HAL_PCD_SOFCallback(hpcd); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ } if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_ESOF)) { /* clear ESOF flag in ISTR */ __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ESOF); } } /** * @brief Handles PCD Wakeup interrupt request. * @param hpcd PCD handle * @retval HAL status */ void HAL_PCD_WKUP_IRQHandler(PCD_HandleTypeDef *hpcd) { /* Clear EXTI pending Bit */ __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG(); } #endif /* defined (USB) */ /** * @brief Data OUT stage callback. * @param hpcd PCD handle * @param epnum endpoint number * @retval None */ __weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) { /* Prevent unused argument(s) compilation warning */ UNUSED(hpcd); UNUSED(epnum); /* NOTE : This function should not be modified, when the callback is needed, the HAL_PCD_DataOutStageCallback could be implemented in the user file */ } /** * @brief Data IN stage callback * @param hpcd PCD handle * @param epnum endpoint number * @retval None */ __weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) { /* Prevent unused argument(s) compilation warning */ UNUSED(hpcd); UNUSED(epnum); /* NOTE : This function should not be modified, when the callback is needed, the HAL_PCD_DataInStageCallback could be implemented in the user file */ } /** * @brief Setup stage callback * @param hpcd PCD handle * @retval None */ __weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) { /* Prevent unused argument(s) compilation warning */ UNUSED(hpcd); /* NOTE : This function should not be modified, when the callback is needed, the HAL_PCD_SetupStageCallback could be implemented in the user file */ } /** * @brief USB Start Of Frame callback. * @param hpcd PCD handle * @retval None */ __weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) { /* Prevent unused argument(s) compilation warning */ UNUSED(hpcd); /* NOTE : This function should not be modified, when the callback is needed, the HAL_PCD_SOFCallback could be implemented in the user file */ } /** * @brief USB Reset callback. * @param hpcd PCD handle * @retval None */ __weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) { /* Prevent unused argument(s) compilation warning */ UNUSED(hpcd); /* NOTE : This function should not be modified, when the callback is needed, the HAL_PCD_ResetCallback could be implemented in the user file */ } /** * @brief Suspend event callback. * @param hpcd PCD handle * @retval None */ __weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) { /* Prevent unused argument(s) compilation warning */ UNUSED(hpcd); /* NOTE : This function should not be modified, when the callback is needed, the HAL_PCD_SuspendCallback could be implemented in the user file */ } /** * @brief Resume event callback. * @param hpcd PCD handle * @retval None */ __weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) { /* Prevent unused argument(s) compilation warning */ UNUSED(hpcd); /* NOTE : This function should not be modified, when the callback is needed, the HAL_PCD_ResumeCallback could be implemented in the user file */ } /** * @brief Incomplete ISO OUT callback. * @param hpcd PCD handle * @param epnum endpoint number * @retval None */ __weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) { /* Prevent unused argument(s) compilation warning */ UNUSED(hpcd); UNUSED(epnum); /* NOTE : This function should not be modified, when the callback is needed, the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file */ } /** * @brief Incomplete ISO IN callback. * @param hpcd PCD handle * @param epnum endpoint number * @retval None */ __weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) { /* Prevent unused argument(s) compilation warning */ UNUSED(hpcd); UNUSED(epnum); /* NOTE : This function should not be modified, when the callback is needed, the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file */ } /** * @brief Connection event callback. * @param hpcd PCD handle * @retval None */ __weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) { /* Prevent unused argument(s) compilation warning */ UNUSED(hpcd); /* NOTE : This function should not be modified, when the callback is needed, the HAL_PCD_ConnectCallback could be implemented in the user file */ } /** * @brief Disconnection event callback. * @param hpcd PCD handle * @retval None */ __weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) { /* Prevent unused argument(s) compilation warning */ UNUSED(hpcd); /* NOTE : This function should not be modified, when the callback is needed, the HAL_PCD_DisconnectCallback could be implemented in the user file */ } /** * @} */ /** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions * @brief management functions * @verbatim =============================================================================== ##### Peripheral Control functions ##### =============================================================================== [..] This subsection provides a set of functions allowing to control the PCD data transfers. @endverbatim * @{ */ /** * @brief Connect the USB device * @param hpcd PCD handle * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd) { __HAL_LOCK(hpcd); #if defined (USB) HAL_PCDEx_SetConnectionState(hpcd, 1U); #endif /* defined (USB) */ (void)USB_DevConnect(hpcd->Instance); __HAL_UNLOCK(hpcd); return HAL_OK; } /** * @brief Disconnect the USB device. * @param hpcd PCD handle * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd) { __HAL_LOCK(hpcd); #if defined (USB) HAL_PCDEx_SetConnectionState(hpcd, 0U); #endif /* defined (USB) */ (void)USB_DevDisconnect(hpcd->Instance); __HAL_UNLOCK(hpcd); return HAL_OK; } /** * @brief Set the USB Device address. * @param hpcd PCD handle * @param address new device address * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address) { __HAL_LOCK(hpcd); hpcd->USB_Address = address; (void)USB_SetDevAddress(hpcd->Instance, address); __HAL_UNLOCK(hpcd); return HAL_OK; } /** * @brief Open and configure an endpoint. * @param hpcd PCD handle * @param ep_addr endpoint address * @param ep_mps endpoint max packet size * @param ep_type endpoint type * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type) { HAL_StatusTypeDef ret = HAL_OK; PCD_EPTypeDef *ep; if ((ep_addr & 0x80U) == 0x80U) { ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; ep->is_in = 1U; } else { ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; ep->is_in = 0U; } ep->num = ep_addr & EP_ADDR_MSK; ep->maxpacket = ep_mps; ep->type = ep_type; if (ep->is_in != 0U) { /* Assign a Tx FIFO */ ep->tx_fifo_num = ep->num; } /* Set initial data PID. */ if (ep_type == EP_TYPE_BULK) { ep->data_pid_start = 0U; } __HAL_LOCK(hpcd); (void)USB_ActivateEndpoint(hpcd->Instance, ep); __HAL_UNLOCK(hpcd); return ret; } /** * @brief Deactivate an endpoint. * @param hpcd PCD handle * @param ep_addr endpoint address * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) { PCD_EPTypeDef *ep; if ((ep_addr & 0x80U) == 0x80U) { ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; ep->is_in = 1U; } else { ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; ep->is_in = 0U; } ep->num = ep_addr & EP_ADDR_MSK; __HAL_LOCK(hpcd); (void)USB_DeactivateEndpoint(hpcd->Instance, ep); __HAL_UNLOCK(hpcd); return HAL_OK; } /** * @brief Receive an amount of data. * @param hpcd PCD handle * @param ep_addr endpoint address * @param pBuf pointer to the reception buffer * @param len amount of data to be received * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) { PCD_EPTypeDef *ep; ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; /*setup and start the Xfer */ ep->xfer_buff = pBuf; ep->xfer_len = len; ep->xfer_count = 0U; ep->is_in = 0U; ep->num = ep_addr & EP_ADDR_MSK; if ((ep_addr & EP_ADDR_MSK) == 0U) { (void)USB_EP0StartXfer(hpcd->Instance, ep); } else { (void)USB_EPStartXfer(hpcd->Instance, ep); } return HAL_OK; } /** * @brief Get Received Data Size * @param hpcd PCD handle * @param ep_addr endpoint address * @retval Data Size */ uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) { return hpcd->OUT_ep[ep_addr & EP_ADDR_MSK].xfer_count; } /** * @brief Send an amount of data * @param hpcd PCD handle * @param ep_addr endpoint address * @param pBuf pointer to the transmission buffer * @param len amount of data to be sent * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) { PCD_EPTypeDef *ep; ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; /*setup and start the Xfer */ ep->xfer_buff = pBuf; ep->xfer_len = len; #if defined (USB) ep->xfer_fill_db = 1U; ep->xfer_len_db = len; #endif /* defined (USB) */ ep->xfer_count = 0U; ep->is_in = 1U; ep->num = ep_addr & EP_ADDR_MSK; if ((ep_addr & EP_ADDR_MSK) == 0U) { (void)USB_EP0StartXfer(hpcd->Instance, ep); } else { (void)USB_EPStartXfer(hpcd->Instance, ep); } return HAL_OK; } /** * @brief Set a STALL condition over an endpoint * @param hpcd PCD handle * @param ep_addr endpoint address * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) { PCD_EPTypeDef *ep; if (((uint32_t)ep_addr & EP_ADDR_MSK) > hpcd->Init.dev_endpoints) { return HAL_ERROR; } if ((0x80U & ep_addr) == 0x80U) { ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; ep->is_in = 1U; } else { ep = &hpcd->OUT_ep[ep_addr]; ep->is_in = 0U; } ep->is_stall = 1U; ep->num = ep_addr & EP_ADDR_MSK; __HAL_LOCK(hpcd); (void)USB_EPSetStall(hpcd->Instance, ep); if ((ep_addr & EP_ADDR_MSK) == 0U) { (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t *)hpcd->Setup); } __HAL_UNLOCK(hpcd); return HAL_OK; } /** * @brief Clear a STALL condition over in an endpoint * @param hpcd PCD handle * @param ep_addr endpoint address * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) { PCD_EPTypeDef *ep; if (((uint32_t)ep_addr & 0x0FU) > hpcd->Init.dev_endpoints) { return HAL_ERROR; } if ((0x80U & ep_addr) == 0x80U) { ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; ep->is_in = 1U; } else { ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; ep->is_in = 0U; } ep->is_stall = 0U; ep->num = ep_addr & EP_ADDR_MSK; __HAL_LOCK(hpcd); (void)USB_EPClearStall(hpcd->Instance, ep); __HAL_UNLOCK(hpcd); return HAL_OK; } /** * @brief Flush an endpoint * @param hpcd PCD handle * @param ep_addr endpoint address * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) { __HAL_LOCK(hpcd); if ((ep_addr & 0x80U) == 0x80U) { (void)USB_FlushTxFifo(hpcd->Instance, (uint32_t)ep_addr & EP_ADDR_MSK); } else { (void)USB_FlushRxFifo(hpcd->Instance); } __HAL_UNLOCK(hpcd); return HAL_OK; } /** * @brief Activate remote wakeup signalling * @param hpcd PCD handle * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) { return (USB_ActivateRemoteWakeup(hpcd->Instance)); } /** * @brief De-activate remote wakeup signalling. * @param hpcd PCD handle * @retval HAL status */ HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) { return (USB_DeActivateRemoteWakeup(hpcd->Instance)); } /** * @} */ /** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions * @brief Peripheral State functions * @verbatim =============================================================================== ##### Peripheral State functions ##### =============================================================================== [..] This subsection permits to get in run-time the status of the peripheral and the data flow. @endverbatim * @{ */ /** * @brief Return the PCD handle state. * @param hpcd PCD handle * @retval HAL state */ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd) { return hpcd->State; } /** * @} */ /** * @} */ /* Private functions ---------------------------------------------------------*/ /** @addtogroup PCD_Private_Functions * @{ */ #if defined (USB_OTG_FS) /** * @brief Check FIFO for the next packet to be loaded. * @param hpcd PCD handle * @param epnum endpoint number * @retval HAL status */ static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum) { USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; uint32_t USBx_BASE = (uint32_t)USBx; USB_OTG_EPTypeDef *ep; uint32_t len; uint32_t len32b; uint32_t fifoemptymsk; ep = &hpcd->IN_ep[epnum]; if (ep->xfer_count > ep->xfer_len) { return HAL_ERROR; } len = ep->xfer_len - ep->xfer_count; if (len > ep->maxpacket) { len = ep->maxpacket; } len32b = (len + 3U) / 4U; while (((USBx_INEP(epnum)->DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV) >= len32b) && (ep->xfer_count < ep->xfer_len) && (ep->xfer_len != 0U)) { /* Write the FIFO */ len = ep->xfer_len - ep->xfer_count; if (len > ep->maxpacket) { len = ep->maxpacket; } len32b = (len + 3U) / 4U; (void)USB_WritePacket(USBx, ep->xfer_buff, (uint8_t)epnum, (uint16_t)len); ep->xfer_buff += len; ep->xfer_count += len; } if (ep->xfer_len <= ep->xfer_count) { fifoemptymsk = (uint32_t)(0x1UL << (epnum & EP_ADDR_MSK)); USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk; } return HAL_OK; } /** * @brief process EP OUT transfer complete interrupt. * @param hpcd PCD handle * @param epnum endpoint number * @retval HAL status */ static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint32_t epnum) { USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; uint32_t USBx_BASE = (uint32_t)USBx; uint32_t gSNPSiD = *(__IO uint32_t *)(&USBx->CID + 0x1U); uint32_t DoepintReg = USBx_OUTEP(epnum)->DOEPINT; if (gSNPSiD == USB_OTG_CORE_ID_310A) { /* StupPktRcvd = 1 this is a setup packet */ if ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX) { CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); } else { if ((DoepintReg & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) { CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); } #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); #else HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ } } else { #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); #else HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ } return HAL_OK; } /** * @brief process EP OUT setup packet received interrupt. * @param hpcd PCD handle * @param epnum endpoint number * @retval HAL status */ static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint32_t epnum) { USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; uint32_t USBx_BASE = (uint32_t)USBx; uint32_t gSNPSiD = *(__IO uint32_t *)(&USBx->CID + 0x1U); uint32_t DoepintReg = USBx_OUTEP(epnum)->DOEPINT; if ((gSNPSiD > USB_OTG_CORE_ID_300A) && ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) { CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); } /* Inform the upper layer that a setup packet is available */ #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->SetupStageCallback(hpcd); #else HAL_PCD_SetupStageCallback(hpcd); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ return HAL_OK; } #endif /* defined (USB_OTG_FS) */ #if defined (USB) /** * @brief This function handles PCD Endpoint interrupt request. * @param hpcd PCD handle * @retval HAL status */ static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) { PCD_EPTypeDef *ep; uint16_t count, wIstr, wEPVal, TxByteNbre; uint8_t epindex; /* stay in loop while pending interrupts */ while ((hpcd->Instance->ISTR & USB_ISTR_CTR) != 0U) { wIstr = hpcd->Instance->ISTR; /* extract highest priority endpoint number */ epindex = (uint8_t)(wIstr & USB_ISTR_EP_ID); if (epindex == 0U) { /* Decode and service control endpoint interrupt */ /* DIR bit = origin of the interrupt */ if ((wIstr & USB_ISTR_DIR) == 0U) { /* DIR = 0 */ /* DIR = 0 => IN int */ /* DIR = 0 implies that (EP_CTR_TX = 1) always */ PCD_CLEAR_TX_EP_CTR(hpcd->Instance, PCD_ENDP0); ep = &hpcd->IN_ep[0]; ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); ep->xfer_buff += ep->xfer_count; /* TX COMPLETE */ #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->DataInStageCallback(hpcd, 0U); #else HAL_PCD_DataInStageCallback(hpcd, 0U); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ if ((hpcd->USB_Address > 0U) && (ep->xfer_len == 0U)) { hpcd->Instance->DADDR = ((uint16_t)hpcd->USB_Address | USB_DADDR_EF); hpcd->USB_Address = 0U; } } else { /* DIR = 1 */ /* DIR = 1 & CTR_RX => SETUP or OUT int */ /* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */ ep = &hpcd->OUT_ep[0]; wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0); if ((wEPVal & USB_EP_SETUP) != 0U) { /* Get SETUP Packet */ ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); USB_ReadPMA(hpcd->Instance, (uint8_t *)hpcd->Setup, ep->pmaadress, (uint16_t)ep->xfer_count); /* SETUP bit kept frozen while CTR_RX = 1 */ PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); /* Process SETUP Packet*/ #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->SetupStageCallback(hpcd); #else HAL_PCD_SetupStageCallback(hpcd); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ } else if ((wEPVal & USB_EP_CTR_RX) != 0U) { PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); /* Get Control Data OUT Packet */ ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); if ((ep->xfer_count != 0U) && (ep->xfer_buff != 0U)) { USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, (uint16_t)ep->xfer_count); ep->xfer_buff += ep->xfer_count; /* Process Control Data OUT Packet */ #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->DataOutStageCallback(hpcd, 0U); #else HAL_PCD_DataOutStageCallback(hpcd, 0U); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ } PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket); PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID); } } } else { /* Decode and service non control endpoints interrupt */ /* process related endpoint register */ wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, epindex); if ((wEPVal & USB_EP_CTR_RX) != 0U) { /* clear int flag */ PCD_CLEAR_RX_EP_CTR(hpcd->Instance, epindex); ep = &hpcd->OUT_ep[epindex]; /* OUT Single Buffering */ if (ep->doublebuffer == 0U) { count = (uint16_t)PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); if (count != 0U) { USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, count); } } else { /* manage double buffer bulk out */ if (ep->type == EP_TYPE_BULK) { count = HAL_PCD_EP_DB_Receive(hpcd, ep, wEPVal); } else /* manage double buffer iso out */ { /* free EP OUT Buffer */ PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); if ((PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_RX) != 0U) { /* read from endpoint BUF0Addr buffer */ count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); if (count != 0U) { USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); } } else { /* read from endpoint BUF1Addr buffer */ count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); if (count != 0U) { USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); } } } } /* multi-packet on the NON control OUT endpoint */ ep->xfer_count += count; ep->xfer_buff += count; if ((ep->xfer_len == 0U) || (count < ep->maxpacket)) { /* RX COMPLETE */ #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->DataOutStageCallback(hpcd, ep->num); #else HAL_PCD_DataOutStageCallback(hpcd, ep->num); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ } else { (void) USB_EPStartXfer(hpcd->Instance, ep); } } if ((wEPVal & USB_EP_CTR_TX) != 0U) { ep = &hpcd->IN_ep[epindex]; /* clear int flag */ PCD_CLEAR_TX_EP_CTR(hpcd->Instance, epindex); /* Manage all non bulk transaction or Bulk Single Buffer Transaction */ if ((ep->type != EP_TYPE_BULK) || ((ep->type == EP_TYPE_BULK) && ((wEPVal & USB_EP_KIND) == 0U))) { /* multi-packet on the NON control IN endpoint */ TxByteNbre = (uint16_t)PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); if (ep->xfer_len > TxByteNbre) { ep->xfer_len -= TxByteNbre; } else { ep->xfer_len = 0U; } /* Zero Length Packet? */ if (ep->xfer_len == 0U) { /* TX COMPLETE */ #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->DataInStageCallback(hpcd, ep->num); #else HAL_PCD_DataInStageCallback(hpcd, ep->num); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ } else { /* Transfer is not yet Done */ ep->xfer_buff += TxByteNbre; ep->xfer_count += TxByteNbre; (void)USB_EPStartXfer(hpcd->Instance, ep); } } /* bulk in double buffer enable in case of transferLen> Ep_Mps */ else { (void)HAL_PCD_EP_DB_Transmit(hpcd, ep, wEPVal); } } } } return HAL_OK; } /** * @brief Manage double buffer bulk out transaction from ISR * @param hpcd PCD handle * @param ep current endpoint handle * @param wEPVal Last snapshot of EPRx register value taken in ISR * @retval HAL status */ static uint16_t HAL_PCD_EP_DB_Receive(PCD_HandleTypeDef *hpcd, PCD_EPTypeDef *ep, uint16_t wEPVal) { uint16_t count; /* Manage Buffer0 OUT */ if ((wEPVal & USB_EP_DTOG_RX) != 0U) { /* Get count of received Data on buffer0 */ count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); if (ep->xfer_len >= count) { ep->xfer_len -= count; } else { ep->xfer_len = 0U; } if (ep->xfer_len == 0U) { /* set NAK to OUT endpoint since double buffer is enabled */ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_NAK); } /* Check if Buffer1 is in blocked sate which requires to toggle */ if ((wEPVal & USB_EP_DTOG_TX) != 0U) { PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); } if (count != 0U) { USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); } } /* Manage Buffer 1 DTOG_RX=0 */ else { /* Get count of received data */ count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); if (ep->xfer_len >= count) { ep->xfer_len -= count; } else { ep->xfer_len = 0U; } if (ep->xfer_len == 0U) { /* set NAK on the current endpoint */ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_NAK); } /*Need to FreeUser Buffer*/ if ((wEPVal & USB_EP_DTOG_TX) == 0U) { PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); } if (count != 0U) { USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); } } return count; } /** * @brief Manage double buffer bulk IN transaction from ISR * @param hpcd PCD handle * @param ep current endpoint handle * @param wEPVal Last snapshot of EPRx register value taken in ISR * @retval HAL status */ static HAL_StatusTypeDef HAL_PCD_EP_DB_Transmit(PCD_HandleTypeDef *hpcd, PCD_EPTypeDef *ep, uint16_t wEPVal) { uint32_t len; uint16_t TxByteNbre; /* Data Buffer0 ACK received */ if ((wEPVal & USB_EP_DTOG_TX) != 0U) { /* multi-packet on the NON control IN endpoint */ TxByteNbre = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); if (ep->xfer_len > TxByteNbre) { ep->xfer_len -= TxByteNbre; } else { ep->xfer_len = 0U; } /* Transfer is completed */ if (ep->xfer_len == 0U) { /* TX COMPLETE */ #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->DataInStageCallback(hpcd, ep->num); #else HAL_PCD_DataInStageCallback(hpcd, ep->num); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ if ((wEPVal & USB_EP_DTOG_RX) != 0U) { PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); } } else /* Transfer is not yet Done */ { /* need to Free USB Buff */ if ((wEPVal & USB_EP_DTOG_RX) != 0U) { PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); } /* Still there is data to Fill in the next Buffer */ if (ep->xfer_fill_db == 1U) { ep->xfer_buff += TxByteNbre; ep->xfer_count += TxByteNbre; /* Calculate the len of the new buffer to fill */ if (ep->xfer_len_db >= ep->maxpacket) { len = ep->maxpacket; ep->xfer_len_db -= len; } else if (ep->xfer_len_db == 0U) { len = TxByteNbre; ep->xfer_fill_db = 0U; } else { ep->xfer_fill_db = 0U; len = ep->xfer_len_db; ep->xfer_len_db = 0U; } /* Write remaining Data to Buffer */ /* Set the Double buffer counter for pma buffer1 */ PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, len); /* Copy user buffer to USB PMA */ USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, (uint16_t)len); } } } else /* Data Buffer1 ACK received */ { /* multi-packet on the NON control IN endpoint */ TxByteNbre = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); if (ep->xfer_len >= TxByteNbre) { ep->xfer_len -= TxByteNbre; } else { ep->xfer_len = 0U; } /* Transfer is completed */ if (ep->xfer_len == 0U) { /* TX COMPLETE */ #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) hpcd->DataInStageCallback(hpcd, ep->num); #else HAL_PCD_DataInStageCallback(hpcd, ep->num); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ /*need to Free USB Buff*/ if ((wEPVal & USB_EP_DTOG_RX) == 0U) { PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); } } else /* Transfer is not yet Done */ { /* need to Free USB Buff */ if ((wEPVal & USB_EP_DTOG_RX) == 0U) { PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); } /* Still there is data to Fill in the next Buffer */ if (ep->xfer_fill_db == 1U) { ep->xfer_buff += TxByteNbre; ep->xfer_count += TxByteNbre; /* Calculate the len of the new buffer to fill */ if (ep->xfer_len_db >= ep->maxpacket) { len = ep->maxpacket; ep->xfer_len_db -= len; } else if (ep->xfer_len_db == 0U) { len = TxByteNbre; ep->xfer_fill_db = 0U; } else { len = ep->xfer_len_db; ep->xfer_len_db = 0U; ep->xfer_fill_db = 0; } /* Set the Double buffer counter for pmabuffer1 */ PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, len); /* Copy the user buffer to USB PMA */ USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, (uint16_t)len); } } } /*enable endpoint IN*/ PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_VALID); return HAL_OK; } #endif /* defined (USB) */ /** * @} */ #endif /* defined (USB) || defined (USB_OTG_FS) */ #endif /* HAL_PCD_MODULE_ENABLED */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/