/************************************************************************************//** * \file Source/ARM7_LPC2000/GCC/flash.c * \brief Bootloader flash driver source file. * \ingroup Target_ARM7_LPC2000 * \internal *---------------------------------------------------------------------------------------- * C O P Y R I G H T *---------------------------------------------------------------------------------------- * Copyright (c) 2011 by Feaser http://www.feaser.com All rights reserved * *---------------------------------------------------------------------------------------- * L I C E N S E *---------------------------------------------------------------------------------------- * This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published by the Free * Software Foundation, either version 3 of the License, or (at your option) any later * version. * * OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; * without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR * PURPOSE. See the GNU General Public License for more details. * * You have received a copy of the GNU General Public License along with OpenBLT. It * should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy. * * \endinternal ****************************************************************************************/ /**************************************************************************************** * Include files ****************************************************************************************/ #include "boot.h" /* bootloader generic header */ /**************************************************************************************** * Macro definitions ****************************************************************************************/ /** \brief Value for an invalid flash sector. */ #define FLASH_INVALID_SECTOR (0xff) /** \brief Value for an invalid flash address. */ #define FLASH_INVALID_ADDRESS (0xffffffff) /** \brief Standard size of a flash block for writing. */ #define FLASH_WRITE_BLOCK_SIZE (512) /** \brief Total numbers of sectors in array flashLayout[]. */ #define FLASH_TOTAL_SECTORS (sizeof(flashLayout)/sizeof(flashLayout[0])) /** \brief End address of the bootloader programmable flash. */ #define FLASH_END_ADDRESS (flashLayout[FLASH_TOTAL_SECTORS-1].sector_start + \ flashLayout[FLASH_TOTAL_SECTORS-1].sector_size - 1) /** \brief Entry address for the IAP algorithms, enabling a switch to thumb mode. */ #define IAP_ENTRY_ADDRESS (0x7ffffff1) /** \brief IAP prepare sectos command code. */ #define IAP_CMD_PREPARE_SECTORS (50) /** \brief IAP copy ram to flash command code. */ #define IAP_CMD_COPY_RAM_TO_FLASH (51) /** \brief IAP erase sectors command code. */ #define IAP_CMD_ERASE_SECTORS (52) /** \brief IAP black check sectors command code. */ #define IAP_CMD_BLANK_CHECK_SECTORS (53) /** \brief IAP compare command code. */ #define IAP_CMD_COMPARE (56) /** \brief IAP result code for success. */ #define IAP_CMD_SUCCESS (0) /**************************************************************************************** * Plausibility checks ****************************************************************************************/ #ifndef BOOT_FLASH_CUSTOM_LAYOUT_ENABLE #define BOOT_FLASH_CUSTOM_LAYOUT_ENABLE (0u) #endif /**************************************************************************************** * Type definitions ****************************************************************************************/ /** \brief Function pointer type that is needed to call IAP functions of the * NXP LPC2xxx. */ typedef void (*pIapHandler)(blt_int32u command[], blt_int32u result[]); /** \brief Flash sector descriptor type. */ typedef struct { blt_addr sector_start; /**< sector start address */ blt_int32u sector_size; /**< sector size in bytes */ blt_int8u sector_num; /**< sector number */ } tFlashSector; /** \brief Structure type for grouping flash block information. * \details Programming is done per block of max FLASH_WRITE_BLOCK_SIZE. for this a * flash block manager is implemented in this driver. this flash block manager * depends on this flash block info structure. It holds the base address of * the flash block and the data that should be programmed into the flash * block. Note that the .data member must be 32-bit aligned by the linker. * the .base_addr must be a multiple of FLASH_WRITE_BLOCK_SIZE. */ typedef struct { blt_addr base_addr; /**< Base address for the flash operation.*/ blt_int8u data[FLASH_WRITE_BLOCK_SIZE] __attribute__((aligned(4))); /**< Data array. */ } tFlashBlockInfo; /**************************************************************************************** * Hook functions ****************************************************************************************/ #if (BOOT_FLASH_CRYPTO_HOOKS_ENABLE > 0) extern blt_bool FlashCryptoDecryptDataHook(blt_int8u * data, blt_int32u size); #endif /**************************************************************************************** * Function prototypes ****************************************************************************************/ static blt_bool FlashInitBlock(tFlashBlockInfo *block, blt_addr address); static tFlashBlockInfo *FlashSwitchBlock(tFlashBlockInfo *block, blt_addr base_addr); static blt_bool FlashAddToBlock(tFlashBlockInfo *block, blt_addr address, blt_int8u *data, blt_int32u len); static blt_bool FlashWriteBlock(tFlashBlockInfo *block); static blt_bool FlashEraseSectors(blt_int8u first_sector, blt_int8u last_sector); static blt_int8u FlashGetSector(blt_addr address); /**************************************************************************************** * Local constant declarations ****************************************************************************************/ /** \brief If desired, it is possible to set BOOT_FLASH_CUSTOM_LAYOUT_ENABLE to > 0 * in blt_conf.h and then implement your own version of the flashLayout[] table * in a source-file with the name flash_layout.c. This way you customize the * flash memory size reserved for the bootloader, without having to modify * the flashLayout[] table in this file directly. This file will then include * flash_layout.c so there is no need to compile it additionally with your * project. */ #if (BOOT_FLASH_CUSTOM_LAYOUT_ENABLE == 0) /** \brief Array wit the layout of the flash memory. * \details Also controls what part of the flash memory is reserved for the bootloader. * If the bootloader size changes, the reserved sectors for the bootloader * might need adjustment to make sure the bootloader doesn't get overwritten. * The current flash layout supports the NXP LPC21xx and LPC22xx targets. * LPC23xx has a slightly different layout. To support the LPC23xx, simply * update this flash layout. */ static const tFlashSector flashLayout[] = { #if (BOOT_NVM_SIZE_KB == 64) /* { 0x00000000, 0x02000, 0}, flash sector 0 - reserved for bootloader */ { 0x00002000, 0x02000, 1}, /* flash sector 1 */ { 0x00004000, 0x02000, 2}, /* flash sector 2 */ { 0x00006000, 0x02000, 3}, /* flash sector 3 */ { 0x00008000, 0x02000, 4}, /* flash sector 4 */ { 0x0000A000, 0x02000, 5}, /* flash sector 5 */ { 0x0000C000, 0x02000, 6}, /* flash sector 6 */ /* { 0x0000E000, 0x02000, 7}, flash sector 7 - used by NXP bootcode */ #endif #if (BOOT_NVM_SIZE_KB == 128) /* { 0x00000000, 0x02000, 0}, flash sector 0 - reserved for bootloader */ { 0x00002000, 0x02000, 1}, /* flash sector 1 */ { 0x00004000, 0x02000, 2}, /* flash sector 2 */ { 0x00006000, 0x02000, 3}, /* flash sector 3 */ { 0x00008000, 0x02000, 4}, /* flash sector 4 */ { 0x0000A000, 0x02000, 5}, /* flash sector 5 */ { 0x0000C000, 0x02000, 6}, /* flash sector 6 */ { 0x0000E000, 0x02000, 7}, /* flash sector 7 */ { 0x00010000, 0x02000, 8}, /* flash sector 8 */ { 0x00012000, 0x02000, 9}, /* flash sector 9 */ { 0x00014000, 0x02000, 10}, /* flash sector 10 */ { 0x00016000, 0x02000, 11}, /* flash sector 11 */ { 0x00018000, 0x02000, 12}, /* flash sector 12 */ { 0x0001A000, 0x02000, 13}, /* flash sector 13 */ { 0x0001C000, 0x02000, 14}, /* flash sector 14 */ /* { 0x0001E000, 0x02000, 15}, flash sector 15 - used by NXP bootcode */ #endif #if (BOOT_NVM_SIZE_KB == 256) /* { 0x00000000, 0x02000, 0}, flash sector 0 - reserved for bootloader */ { 0x00002000, 0x02000, 1}, /* flash sector 1 */ { 0x00004000, 0x02000, 2}, /* flash sector 2 */ { 0x00006000, 0x02000, 3}, /* flash sector 3 */ { 0x00008000, 0x02000, 4}, /* flash sector 4 */ { 0x0000A000, 0x02000, 5}, /* flash sector 5 */ { 0x0000C000, 0x02000, 6}, /* flash sector 6 */ { 0x0000E000, 0x02000, 7}, /* flash sector 7 */ { 0x00010000, 0x10000, 8}, /* flash sector 8 */ { 0x00020000, 0x10000, 9}, /* flash sector 9 */ { 0x00030000, 0x02000, 10}, /* flash sector 10 */ { 0x00032000, 0x02000, 11}, /* flash sector 11 */ { 0x00034000, 0x02000, 12}, /* flash sector 12 */ { 0x00036000, 0x02000, 13}, /* flash sector 13 */ { 0x00038000, 0x02000, 14}, /* flash sector 14 */ { 0x0003A000, 0x02000, 15}, /* flash sector 15 */ { 0x0003C000, 0x02000, 16}, /* flash sector 16 */ /* { 0x0003E000, 0x02000, 17}, flash sector 17 - used by NXP bootcode */ #endif }; #else #include "flash_layout.c" #endif /* BOOT_FLASH_CUSTOM_LAYOUT_ENABLE == 0 */ /**************************************************************************************** * Local data declarations ****************************************************************************************/ /** \brief Local variable with information about the flash block that is currently * being operated on. * \details The smallest amount of flash that can be programmed is * FLASH_WRITE_BLOCK_SIZE. A flash block manager is implemented in this driver * and stores info in this variable. Whenever new data should be flashed, it * is first added to a RAM buffer, which is part of this variable. Whenever * the RAM buffer, which has the size of a flash block, is full or data needs * to be written to a different block, the contents of the RAM buffer are * programmed to flash. The flash block manager requires some software * overhead, yet results is faster flash programming because data is first * harvested, ideally until there is enough to program an entire flash block, * before the flash device is actually operated on. */ static tFlashBlockInfo blockInfo; /** \brief Local variable with information about the flash boot block. * \details The first block of the user program holds the vector table, which on the * LPC2000 is also the where the checksum is written to. Is it likely that the * vector table is first flashed and then, at the end of the programming * sequence, the checksum. This means that this flash block need to be written * to twice. Normally this is not a problem with flash memory, as long as you * write the same values to those bytes that are not supposed to be changed and * the locations where you do write to are still in the erased 0xFF state. * Unfortunately, writing twice to flash this way, does not work reliably on * the LPC2000. This is why we need to have an extra block, the bootblock, * placed under the management of the block manager. This way is it possible * to implement functionality so that the bootblock is only written to once at * the end of the programming sequence. */ static tFlashBlockInfo bootBlockInfo; /************************************************************************************//** ** \brief Initializes the flash driver. ** \return none. ** ****************************************************************************************/ void FlashInit(void) { /* check the flash block data buffer alignments */ if ((((blt_addr)blockInfo.data % 4) != 0) || (((blt_addr)bootBlockInfo.data % 4) != 0)) { /* incorrect alignment */ ASSERT_RT(BLT_FALSE); } /* init the flash block info structs by setting the address to an invalid address */ blockInfo.base_addr = FLASH_INVALID_ADDRESS; bootBlockInfo.base_addr = FLASH_INVALID_ADDRESS; } /*** end of FlashInit ***/ /************************************************************************************//** ** \brief Reinitializes the flash driver. ** \return none. ** ****************************************************************************************/ void FlashReinit(void) { /* init the flash block info structs by setting the address to an invalid address */ blockInfo.base_addr = FLASH_INVALID_ADDRESS; bootBlockInfo.base_addr = FLASH_INVALID_ADDRESS; } /*** end of FlashReinit ***/ /************************************************************************************//** ** \brief Writes the data to flash through a flash block manager. Note that this ** function also checks that no data is programmed outside the flash ** memory region, so the bootloader can never be overwritten. ** \param addr Start address. ** \param len Length in bytes. ** \param data Pointer to the data buffer. ** \return BLT_TRUE if successful, BLT_FALSE otherwise. ** ****************************************************************************************/ blt_bool FlashWrite(blt_addr addr, blt_int32u len, blt_int8u *data) { blt_addr base_addr; /* validate the len parameter */ if ((len - 1) > (FLASH_END_ADDRESS - addr)) { return BLT_FALSE; } /* make sure the addresses are within the flash device */ if ((FlashGetSector(addr) == FLASH_INVALID_SECTOR) || \ (FlashGetSector(addr+len-1) == FLASH_INVALID_SECTOR)) { return BLT_FALSE; } /* if this is the bootblock, then let the boot block manager handle it */ base_addr = (addr/FLASH_WRITE_BLOCK_SIZE)*FLASH_WRITE_BLOCK_SIZE; if (base_addr == flashLayout[0].sector_start) { /* let the boot block manager handle it */ return FlashAddToBlock(&bootBlockInfo, addr, data, len); } /* let the block manager handle it */ return FlashAddToBlock(&blockInfo, addr, data, len); } /*** end of FlashWrite ***/ /************************************************************************************//** ** \brief Erases the flash memory. Note that this function also checks that no ** data is erased outside the flash memory region, so the bootloader can ** never be erased. ** \param addr Start address. ** \param len Length in bytes. ** \return BLT_TRUE if successful, BLT_FALSE otherwise. ** ****************************************************************************************/ blt_bool FlashErase(blt_addr addr, blt_int32u len) { blt_int8u first_sector; blt_int8u last_sector; /* validate the len parameter */ if ((len - 1) > (FLASH_END_ADDRESS - addr)) { return BLT_FALSE; } /* obtain the first and last sector number */ first_sector = FlashGetSector(addr); last_sector = FlashGetSector(addr+len-1); /* check them */ if ((first_sector == FLASH_INVALID_SECTOR) || (last_sector == FLASH_INVALID_SECTOR)) { return BLT_FALSE; } /* erase the sectors */ return FlashEraseSectors(first_sector, last_sector); } /*** end of FlashErase ***/ /************************************************************************************//** ** \brief Writes a checksum of the user program to non-volatile memory. This is ** performed once the entire user program has been programmed. Through ** the checksum, the bootloader can check if the programming session ** was completed, which indicates that a valid user programming is ** present and can be started. ** \return BLT_TRUE if successful, BLT_FALSE otherwise. ** ****************************************************************************************/ blt_bool FlashWriteChecksum(void) { blt_int32u signature_checksum = 0; /* The ARM7 core already has a spot reserved for a checksum that the bootloader can * store at the end of a programming session. * * Layout of the vector table (* = don't care) * 0x******00 Reset Exception * 0x******04 Undefined Instruction Exception * 0x******08 Software Interrupt Exception * 0x******0C Prefetch Exception * 0x******10 Abort Exception * 0x******14 [reserved for signature checksum] * 0x******18 IRQ Exception * 0x******1C FIQ Exception * * signature_checksum = Two's complement of (SUM(exception address values)) */ /* first check that the bootblock contains valid data. if not, this means the * bootblock is not part of the reprogramming this time and therefore no * new checksum needs to be written */ if (bootBlockInfo.base_addr == FLASH_INVALID_ADDRESS) { return BLT_TRUE; } #if (BOOT_FLASH_CRYPTO_HOOKS_ENABLE > 0) /* perform decryption of the bootblock, before calculating the checksum and writing it * to flash memory. */ if (FlashCryptoDecryptDataHook(bootBlockInfo.data, FLASH_WRITE_BLOCK_SIZE) == BLT_FALSE) { return BLT_FALSE; } #endif /* compute the checksum. note that the user program's vectors are not yet written * to flash but are present in the bootblock data structure at this point. */ signature_checksum += *((blt_int32u *)(&bootBlockInfo.data[0+0x00])); signature_checksum += *((blt_int32u *)(&bootBlockInfo.data[0+0x04])); signature_checksum += *((blt_int32u *)(&bootBlockInfo.data[0+0x08])); signature_checksum += *((blt_int32u *)(&bootBlockInfo.data[0+0x0C])); signature_checksum += *((blt_int32u *)(&bootBlockInfo.data[0+0x10])); signature_checksum += *((blt_int32u *)(&bootBlockInfo.data[0+0x18])); signature_checksum += *((blt_int32u *)(&bootBlockInfo.data[0+0x1C])); signature_checksum = ~signature_checksum; /* one's complement */ signature_checksum += 1; /* two's complement */ /* write the checksum */ return FlashWrite(flashLayout[0].sector_start+0x14, sizeof(blt_addr), (blt_int8u *)&signature_checksum); } /*** end of FlashWriteChecksum ***/ /************************************************************************************//** ** \brief Verifies the checksum, which indicates that a valid user program is ** present and can be started. ** \return BLT_TRUE if successful, BLT_FALSE otherwise. ** ****************************************************************************************/ blt_bool FlashVerifyChecksum(void) { blt_int32u signature_checksum = 0; /* verify the checksum based on how it was written by CpuWriteChecksum() */ signature_checksum += *((blt_int32u *)(flashLayout[0].sector_start)); signature_checksum += *((blt_int32u *)(flashLayout[0].sector_start+0x04)); signature_checksum += *((blt_int32u *)(flashLayout[0].sector_start+0x08)); signature_checksum += *((blt_int32u *)(flashLayout[0].sector_start+0x0C)); signature_checksum += *((blt_int32u *)(flashLayout[0].sector_start+0x10)); signature_checksum += *((blt_int32u *)(flashLayout[0].sector_start+0x14)); signature_checksum += *((blt_int32u *)(flashLayout[0].sector_start+0x18)); signature_checksum += *((blt_int32u *)(flashLayout[0].sector_start+0x1C)); /* sum should add up to an unsigned 32-bit value of 0 */ if (signature_checksum == 0) { /* checksum okay */ return BLT_TRUE; } /* checksum incorrect */ return BLT_FALSE; } /*** end of FlashVerifyChecksum ***/ /************************************************************************************//** ** \brief Finalizes the flash driver operations. There could still be data in ** the currently active block that needs to be flashed. ** \return BLT_TRUE if successful, BLT_FALSE otherwise. ** ****************************************************************************************/ blt_bool FlashDone(void) { /* check if there is still data waiting to be programmed in the boot block */ if (bootBlockInfo.base_addr != FLASH_INVALID_ADDRESS) { if (FlashWriteBlock(&bootBlockInfo) == BLT_FALSE) { return BLT_FALSE; } } /* check if there is still data waiting to be programmed */ if (blockInfo.base_addr != FLASH_INVALID_ADDRESS) { if (FlashWriteBlock(&blockInfo) == BLT_FALSE) { return BLT_FALSE; } } /* still here so all is okay */ return BLT_TRUE; } /*** end of FlashDone ***/ /************************************************************************************//** ** \brief Obtains the base address of the flash memory available to the user program. ** This is basically the first address in the flashLayout table. ** \return Base address. ** ****************************************************************************************/ blt_addr FlashGetUserProgBaseAddress(void) { return flashLayout[0].sector_start; } /*** end of FlashGetUserProgBaseAddress ***/ /************************************************************************************//** ** \brief Copies data currently in flash to the block->data and sets the ** base address. ** \param block Pointer to flash block info structure to operate on. ** \param address Base address of the block data. ** \return BLT_TRUE if successful, BLT_FALSE otherwise. ** ****************************************************************************************/ static blt_bool FlashInitBlock(tFlashBlockInfo *block, blt_addr address) { /* check address alignment */ if ((address % FLASH_WRITE_BLOCK_SIZE) != 0) { return BLT_FALSE; } /* make sure that we are initializing a new block and not the same one */ if (block->base_addr == address) { /* block already initialized, so nothing to do */ return BLT_TRUE; } /* set the base address and copies the current data from flash */ block->base_addr = address; CpuMemCopy((blt_addr)block->data, address, FLASH_WRITE_BLOCK_SIZE); return BLT_TRUE; } /*** end of FlashInitBlock ***/ /************************************************************************************//** ** \brief Switches blocks by programming the current one and initializing the ** next. ** \param block Pointer to flash block info structure to operate on. ** \param base_addr Base address of the next block. ** \return The pointer of the block info struct that is no being used, or a NULL ** pointer in case of error. ** ****************************************************************************************/ static tFlashBlockInfo *FlashSwitchBlock(tFlashBlockInfo *block, blt_addr base_addr) { /* check if a switch needs to be made away from the boot block. in this case the boot * block shouldn't be written yet, because this is done at the end of the programming * session by FlashDone(), this is right after the checksum was written. */ if (block == &bootBlockInfo) { /* switch from the boot block to the generic block info structure */ block = &blockInfo; } /* check if a switch back into the bootblock is needed. in this case the generic block * doesn't need to be written here yet. */ else if (base_addr == flashLayout[0].sector_start) { /* switch from the generic block to the boot block info structure */ block = &bootBlockInfo; base_addr = flashLayout[0].sector_start; } else { /* need to switch to a new block, so program the current one and init the next */ if (FlashWriteBlock(block) == BLT_FALSE) { return BLT_NULL; } } /* initialize tne new block when necessary */ if (FlashInitBlock(block, base_addr) == BLT_FALSE) { return BLT_NULL; } /* still here to all is okay */ return block; } /*** end of FlashSwitchBlock ***/ /************************************************************************************//** ** \brief Programming is done per block. This function adds data to the block ** that is currently collecting data to be written to flash. If the ** address is outside of the current block, the current block is written ** to flash an a new block is initialized. ** \param block Pointer to flash block info structure to operate on. ** \param address Flash destination address. ** \param data Pointer to the byte array with data. ** \param len Number of bytes to add to the block. ** \return BLT_TRUE if successful, BLT_FALSE otherwise. ** ****************************************************************************************/ static blt_bool FlashAddToBlock(tFlashBlockInfo *block, blt_addr address, blt_int8u *data, blt_int32u len) { blt_addr current_base_addr; blt_int8u *dst; blt_int8u *src; /* determine the current base address */ current_base_addr = (address/FLASH_WRITE_BLOCK_SIZE)*FLASH_WRITE_BLOCK_SIZE; /* make sure the blockInfo is not uninitialized */ if (block->base_addr == FLASH_INVALID_ADDRESS) { /* initialize the blockInfo struct for the current block */ if (FlashInitBlock(block, current_base_addr) == BLT_FALSE) { return BLT_FALSE; } } /* check if the new data fits in the current block */ if (block->base_addr != current_base_addr) { /* need to switch to a new block, so program the current one and init the next */ block = FlashSwitchBlock(block, current_base_addr); if (block == BLT_NULL) { return BLT_FALSE; } } /* add the data to the current block, but check for block overflow */ dst = &(block->data[address - block->base_addr]); src = data; do { /* keep the watchdog happy */ CopService(); /* buffer overflow? */ if ((blt_addr)(dst-&(block->data[0])) >= FLASH_WRITE_BLOCK_SIZE) { /* need to switch to a new block, so program the current one and init the next */ block = FlashSwitchBlock(block, current_base_addr+FLASH_WRITE_BLOCK_SIZE); if (block == BLT_NULL) { return BLT_FALSE; } /* reset destination pointer */ dst = &(block->data[0]); } /* write the data to the buffer */ *dst = *src; /* update pointers */ dst++; src++; /* decrement byte counter */ len--; } while (len > 0); /* still here so all is good */ return BLT_TRUE; } /*** end of FlashAddToBlock ***/ /************************************************************************************//** ** \brief Programs FLASH_WRITE_BLOCK_SIZE bytes to flash from the block->data ** array. ** \param block Pointer to flash block info structure to operate on. ** \return BLT_TRUE if successful, BLT_FALSE otherwise. ** ****************************************************************************************/ static blt_bool FlashWriteBlock(tFlashBlockInfo *block) { blt_int32u iap_command[5]; blt_int32u iap_result[3]; blt_int8u sector_num; pIapHandler iapHandler = (void *)IAP_ENTRY_ADDRESS; /* check that address is actually within flash */ sector_num = FlashGetSector(block->base_addr); if (sector_num == FLASH_INVALID_SECTOR) { return BLT_FALSE; } #if (BOOT_FLASH_CRYPTO_HOOKS_ENABLE > 0) #if (BOOT_NVM_CHECKSUM_HOOKS_ENABLE == 0) /* note that the bootblock is already decrypted in FlashWriteChecksum(), if the * internal checksum mechanism is used. Therefore don't decrypt it again. */ if (block != &bootBlockInfo) #endif { /* perform decryption of the program data before writing it to flash memory. */ if (FlashCryptoDecryptDataHook(block->data, FLASH_WRITE_BLOCK_SIZE) == BLT_FALSE) { return BLT_FALSE; } } #endif /* send the prepare sector command for just this one sector */ iap_command[0] = IAP_CMD_PREPARE_SECTORS; iap_command[1] = sector_num; iap_command[2] = sector_num; iap_result[0] = !IAP_CMD_SUCCESS; /* service the watchdog before calling the IAP handler */ CopService(); iapHandler(iap_command, iap_result); if (iap_result[0] != IAP_CMD_SUCCESS) { return BLT_FALSE; } /* send the erase sector command */ iap_command[0] = IAP_CMD_COPY_RAM_TO_FLASH; iap_command[1] = (blt_int32u)block->base_addr; iap_command[2] = (blt_int32u)block->data; iap_command[3] = FLASH_WRITE_BLOCK_SIZE; iap_command[4] = BOOT_CPU_SYSTEM_SPEED_KHZ; iap_result[0] = !IAP_CMD_SUCCESS; /* service the watchdog before calling the IAP handler */ CopService(); iapHandler(iap_command, iap_result); if (iap_result[0] != IAP_CMD_SUCCESS) { return BLT_FALSE; } /* perform a comparison for verification purposes */ iap_command[0] = IAP_CMD_COMPARE; iap_command[1] = (blt_int32u)block->base_addr; iap_command[2] = (blt_int32u)block->data; iap_command[3] = FLASH_WRITE_BLOCK_SIZE; iap_result[0] = !IAP_CMD_SUCCESS; /* service the watchdog before calling the IAP handler */ CopService(); iapHandler(iap_command, iap_result); if (iap_result[0] != IAP_CMD_SUCCESS) { return BLT_FALSE; } /* still here so all is okay */ return BLT_TRUE; } /*** end of FlashWriteBlock ***/ /************************************************************************************//** ** \brief Erases the flash sectors from first_sector up until last_sector. ** \param first_sector First flash sector number. ** \param last_sector Last flash sector number. ** \return BLT_TRUE if successful, BLT_FALSE otherwise. ** ****************************************************************************************/ static blt_bool FlashEraseSectors(blt_int8u first_sector, blt_int8u last_sector) { blt_int32u iap_command[5]; blt_int32u iap_result[3]; pIapHandler iapHandler = (void *)IAP_ENTRY_ADDRESS; /* validate the sector numbers */ if (first_sector > last_sector) { return BLT_FALSE; } if ((first_sector < flashLayout[0].sector_num) || \ (last_sector > flashLayout[FLASH_TOTAL_SECTORS-1].sector_num)) { return BLT_FALSE; } /* send the prepare sector command for just this one sector */ iap_command[0] = IAP_CMD_PREPARE_SECTORS; iap_command[1] = first_sector; iap_command[2] = last_sector; iap_result[0] = !IAP_CMD_SUCCESS; /* service the watchdog before calling the IAP handler */ CopService(); iapHandler(iap_command, iap_result); if (iap_result[0] != IAP_CMD_SUCCESS) { return BLT_FALSE; } /* send the erase sector command */ iap_command[0] = IAP_CMD_ERASE_SECTORS; iap_command[1] = first_sector; iap_command[2] = last_sector; iap_command[3] = BOOT_CPU_SYSTEM_SPEED_KHZ; iap_result[0] = !IAP_CMD_SUCCESS; /* service the watchdog before calling the IAP handler */ CopService(); iapHandler(iap_command, iap_result); if (iap_result[0] != IAP_CMD_SUCCESS) { return BLT_FALSE; } /* perform a blank check for verification purposes */ iap_command[0] = IAP_CMD_BLANK_CHECK_SECTORS ; iap_command[1] = first_sector; iap_command[2] = last_sector; iap_result[0] = !IAP_CMD_SUCCESS; /* service the watchdog before calling the IAP handler */ CopService(); iapHandler(iap_command, iap_result); if (iap_result[0] != IAP_CMD_SUCCESS) { return BLT_FALSE; } /* still here so all went okay */ return BLT_TRUE; } /*** end of FlashEraseSectors ***/ /************************************************************************************//** ** \brief Determines the flash sector the address is in. ** \param address Address in the flash sector. ** \return Flash sector number or FLASH_INVALID_SECTOR. ** ****************************************************************************************/ static blt_int8u FlashGetSector(blt_addr address) { blt_int8u sectorIdx; /* search through the sectors to find the right one */ for (sectorIdx = 0; sectorIdx < FLASH_TOTAL_SECTORS; sectorIdx++) { /* keep the watchdog happy */ CopService(); /* is the address in this sector? */ if ((address >= flashLayout[sectorIdx].sector_start) && \ (address < (flashLayout[sectorIdx].sector_start + \ flashLayout[sectorIdx].sector_size))) { /* return the sector number */ return flashLayout[sectorIdx].sector_num; } } /* still here so no valid sector found */ return FLASH_INVALID_SECTOR; } /*** end of FlashGetSector ***/ /*********************************** end of flash.c ************************************/