/** ****************************************************************************** * @file stm32f1xx_hal_pwr.h * @author MCD Application Team * @brief Header file of PWR HAL module. ****************************************************************************** * @attention * *

© Copyright (c) 2016 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F1xx_HAL_PWR_H #define __STM32F1xx_HAL_PWR_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f1xx_hal_def.h" /** @addtogroup STM32F1xx_HAL_Driver * @{ */ /** @addtogroup PWR * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup PWR_Exported_Types PWR Exported Types * @{ */ /** * @brief PWR PVD configuration structure definition */ typedef struct { uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. This parameter can be a value of @ref PWR_PVD_detection_level */ uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. This parameter can be a value of @ref PWR_PVD_Mode */ }PWR_PVDTypeDef; /** * @} */ /* Internal constants --------------------------------------------------------*/ /** @addtogroup PWR_Private_Constants * @{ */ #define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup PWR_Exported_Constants PWR Exported Constants * @{ */ /** @defgroup PWR_PVD_detection_level PWR PVD detection level * @{ */ #define PWR_PVDLEVEL_0 PWR_CR_PLS_2V2 #define PWR_PVDLEVEL_1 PWR_CR_PLS_2V3 #define PWR_PVDLEVEL_2 PWR_CR_PLS_2V4 #define PWR_PVDLEVEL_3 PWR_CR_PLS_2V5 #define PWR_PVDLEVEL_4 PWR_CR_PLS_2V6 #define PWR_PVDLEVEL_5 PWR_CR_PLS_2V7 #define PWR_PVDLEVEL_6 PWR_CR_PLS_2V8 #define PWR_PVDLEVEL_7 PWR_CR_PLS_2V9 /** * @} */ /** @defgroup PWR_PVD_Mode PWR PVD Mode * @{ */ #define PWR_PVD_MODE_NORMAL 0x00000000U /*!< basic mode is used */ #define PWR_PVD_MODE_IT_RISING 0x00010001U /*!< External Interrupt Mode with Rising edge trigger detection */ #define PWR_PVD_MODE_IT_FALLING 0x00010002U /*!< External Interrupt Mode with Falling edge trigger detection */ #define PWR_PVD_MODE_IT_RISING_FALLING 0x00010003U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ #define PWR_PVD_MODE_EVENT_RISING 0x00020001U /*!< Event Mode with Rising edge trigger detection */ #define PWR_PVD_MODE_EVENT_FALLING 0x00020002U /*!< Event Mode with Falling edge trigger detection */ #define PWR_PVD_MODE_EVENT_RISING_FALLING 0x00020003U /*!< Event Mode with Rising/Falling edge trigger detection */ /** * @} */ /** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins * @{ */ #define PWR_WAKEUP_PIN1 PWR_CSR_EWUP /** * @} */ /** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR Regulator state in SLEEP/STOP mode * @{ */ #define PWR_MAINREGULATOR_ON 0x00000000U #define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS /** * @} */ /** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry * @{ */ #define PWR_SLEEPENTRY_WFI ((uint8_t)0x01) #define PWR_SLEEPENTRY_WFE ((uint8_t)0x02) /** * @} */ /** @defgroup PWR_STOP_mode_entry PWR STOP mode entry * @{ */ #define PWR_STOPENTRY_WFI ((uint8_t)0x01) #define PWR_STOPENTRY_WFE ((uint8_t)0x02) /** * @} */ /** @defgroup PWR_Flag PWR Flag * @{ */ #define PWR_FLAG_WU PWR_CSR_WUF #define PWR_FLAG_SB PWR_CSR_SBF #define PWR_FLAG_PVDO PWR_CSR_PVDO /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup PWR_Exported_Macros PWR Exported Macros * @{ */ /** @brief Check PWR flag is set or not. * @param __FLAG__: specifies the flag to check. * This parameter can be one of the following values: * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event * was received from the WKUP pin or from the RTC alarm * An additional wakeup event is detected if the WKUP pin is enabled * (by setting the EWUP bit) when the WKUP pin level is already high. * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was * resumed from StandBy mode. * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode * For this reason, this bit is equal to 0 after Standby or reset * until the PVDE bit is set. * @retval The new state of __FLAG__ (TRUE or FALSE). */ #define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__)) /** @brief Clear the PWR's pending flags. * @param __FLAG__: specifies the flag to clear. * This parameter can be one of the following values: * @arg PWR_FLAG_WU: Wake Up flag * @arg PWR_FLAG_SB: StandBy flag */ #define __HAL_PWR_CLEAR_FLAG(__FLAG__) SET_BIT(PWR->CR, ((__FLAG__) << 2)) /** * @brief Enable interrupt on PVD Exti Line 16. * @retval None. */ #define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD) /** * @brief Disable interrupt on PVD Exti Line 16. * @retval None. */ #define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD) /** * @brief Enable event on PVD Exti Line 16. * @retval None. */ #define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD) /** * @brief Disable event on PVD Exti Line 16. * @retval None. */ #define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD) /** * @brief PVD EXTI line configuration: set falling edge trigger. * @retval None. */ #define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) /** * @brief Disable the PVD Extended Interrupt Falling Trigger. * @retval None. */ #define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) /** * @brief PVD EXTI line configuration: set rising edge trigger. * @retval None. */ #define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) /** * @brief Disable the PVD Extended Interrupt Rising Trigger. * This parameter can be: * @retval None. */ #define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) /** * @brief PVD EXTI line configuration: set rising & falling edge trigger. * @retval None. */ #define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); /** * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. * This parameter can be: * @retval None. */ #define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); /** * @brief Check whether the specified PVD EXTI interrupt flag is set or not. * @retval EXTI PVD Line Status. */ #define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD)) /** * @brief Clear the PVD EXTI flag. * @retval None. */ #define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD)) /** * @brief Generate a Software interrupt on selected EXTI line. * @retval None. */ #define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, PWR_EXTI_LINE_PVD) /** * @} */ /* Private macro -------------------------------------------------------------*/ /** @defgroup PWR_Private_Macros PWR Private Macros * @{ */ #define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) #define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \ ((MODE) == PWR_PVD_MODE_NORMAL)) #define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1)) #define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) #define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) #define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE)) /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup PWR_Exported_Functions PWR Exported Functions * @{ */ /** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions * @{ */ /* Initialization and de-initialization functions *******************************/ void HAL_PWR_DeInit(void); void HAL_PWR_EnableBkUpAccess(void); void HAL_PWR_DisableBkUpAccess(void); /** * @} */ /** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions * @{ */ /* Peripheral Control functions ************************************************/ void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); /* #define HAL_PWR_ConfigPVD 12*/ void HAL_PWR_EnablePVD(void); void HAL_PWR_DisablePVD(void); /* WakeUp pins configuration functions ****************************************/ void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx); void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); /* Low Power modes configuration functions ************************************/ void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); void HAL_PWR_EnterSTANDBYMode(void); void HAL_PWR_EnableSleepOnExit(void); void HAL_PWR_DisableSleepOnExit(void); void HAL_PWR_EnableSEVOnPend(void); void HAL_PWR_DisableSEVOnPend(void); void HAL_PWR_PVD_IRQHandler(void); void HAL_PWR_PVDCallback(void); /** * @} */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F1xx_HAL_PWR_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/