/**
 * @file xmc_can.h
 * @date 2016-06-07
 *
 * @cond
 *********************************************************************************************************************
 * XMClib v2.1.12 - XMC Peripheral Driver Library 
 *
 * Copyright (c) 2015-2017, Infineon Technologies AG
 * All rights reserved.                        
 *                                             
 * Redistribution and use in source and binary forms, with or without modification,are permitted provided that the 
 * following conditions are met:   
 *                                                                              
 * Redistributions of source code must retain the above copyright notice, this list of conditions and the following 
 * disclaimer.                        
 * 
 * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following 
 * disclaimer in the documentation and/or other materials provided with the distribution.                       
 * 
 * Neither the name of the copyright holders nor the names of its contributors may be used to endorse or promote 
 * products derived from this software without specific prior written permission.                                           
 *                                                                              
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE  
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE  FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR  
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 
 * WHETHER IN CONTRACT, STRICT LIABILITY,OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                                                  
 *                                                                              
 * To improve the quality of the software, users are encouraged to share modifications, enhancements or bug fixes with 
 * Infineon Technologies AG dave@infineon.com).                                                          
 *********************************************************************************************************************
 *
 * Change History
 * --------------
 *
 * 2015-02-20:
 *     - Initial <br>
 *     - Documentation improved <br>
 *
 * 2015-05-20:
 *     - New elements have added in XMC_CAN_MO_t data structure <br>
 *     - XMC_CAN_MO_Config() signature has changed <br>
 *     - XMC_CAN_STATUS_t enum structure has updated. <br>
 *
 * 2015-06-20:
 *     - New APIs added: XMC_CAN_NODE_ClearStatus(),XMC_CAN_MO_ReceiveData(), XMC_CAN_GATEWAY_InitDesObject(). <br>
 *     - Removed version macros and declaration of GetDriverVersion API
 *      
 * 2015-07-09:
 *     - New API added: XMC_CAN_NODE_Enable. <br>
 *
 * 2015-09-01:
 *     - Removed fCANB clock support <br>
 *
 * 2015-09-15:
 *     - Added "xmc_can_map.h" include <br>
 *
 * 2016-06-07:
 *     - Added XMC_CAN_IsPanelControlReady()
 *
 * <b>Details of use for node configuration related APIs</b><br>
 * Please use the XMC_CAN_NODE_SetInitBit() and XMC_CAN_NODE_EnableConfigurationChange() before calling node configuration
 * related APIs.
 * XMC_CAN_NODE_DisableConfigurationChange() and  XMC_CAN_NODE_ResetInitBit() can be called for disable the configuration
 * change and enable the node for communication afterwards.
 * Do not use this when configuring the nominal bit time with XMC_CAN_NODE_NominalBitTimeConfigure(). In this case the
 * Enable/Disable node configuration change is taken in account.
 *
 * <b>Example Usage:</b>
 * @code
 * //disabling the Node
 * XMC_CAN_NODE_SetInitBit(CAN_NODE0)
 * //allowing the configuration change
 * XMC_CAN_NODE_EnableConfigurationChange(CAN_NODE0)
 * //Node configuration
 * XMC_CAN_NODE_FrameCounterConfigure(CAN_NODE0,&can_node_frame_counter);
 * XMC_CAN_NODE_EnableLoopBack(CAN_NODE0)
 * //disable configuration
 * XMC_CAN_NODE_DisableConfigurationChange(CAN_NODE0)
 * //Enabling node for communication
 * XMC_CAN_NODE_ResetInitBit(CAN_NODE0)
 * @endcode
 *
 * 2016-06-20:
 *     - Fixed bug in XMC_CAN_MO_Config() <br>  
 * @endcond
 *
 */

#ifndef XMC_CAN_H
#define XMC_CAN_H

/*********************************************************************************************************************
 * HEADER FILES
 ********************************************************************************************************************/
#include "xmc_common.h"

#if defined(CAN)

#include "xmc_scu.h"
#include "xmc_can_map.h"
#include <string.h>

/**
 * @addtogroup XMClib XMC Peripheral Library
 * @{
 */

/**
 * @addtogroup CAN
 * @brief Controller Area Network Controller (CAN) driver for the XMC microcontroller family.
 *
 * CAN driver provides transfer of CAN frames in accordance with CAN specificetion V2.0 B (active). Each CAN node 
 * can receive and transmit standard frames with 11-bit identifiers as well as extended frames with 29-bit identifiers.
 * All CAN nodes share a common set of message objects. Each message object can be individually allocated to one of the
 * CAN nodes. 
 * Besides serving as a storage container for incoming and outgoing frames, message objects can be combined to build
 * gateways between 
 * the CAN nodes or to setup a FIFO buffer. The CAN module provides Analyzer mode,Loop-back mode and bit timming for
 * node analysis.
 * 
 * The driver is divided into five sections:
 * \par CAN Global features:
 * -# Allows to configure module frequency using function XMC_CAN_Init().
 * -# Allows to configure Module interrupt using configuration structure XMC_CAN_NODE_INTERRUPT_TRIGGER_t and function
 *    XMC_CAN_EventTrigger().
 * 
 * \par CAN_NODE features:
 * -# Allows to set baud rate by configuration structure XMC_CAN_NODE_NOMINAL_BIT_TIME_CONFIG_t and Baudrate Configuration
 *    function XMC_CAN_NODE_NominalBitTimeConfigure().
 * -# Allows to configure loop-back mode using fuction XMC_CAN_NODE_EnableLoopBack().
 * -# Allows to configure CAN Node analyzer using function XMC_CAN_NODE_SetAnalyzerMode().
 * -# Allows CAN node events enable/ disable by enum structure XMC_CAN_NODE_EVENT_t and functions XMC_CAN_NODE_EnableEvent()
 *    and XMC_CAN_NODE_DisableEvent().
 * -# Provides bit timming analysis, configuration structure XMC_CAN_NODE_FRAME_COUNTER_t and function
 *    XMC_CAN_NODE_FrameCounterConfigure(). 
 *
 * \par CAN_MO features:
 * -# Allows message object initialization by configuration structure XMC_CAN_MO_t and function XMC_CAN_MO_Config().
 * -# Allows transfer of message objects using functions XMC_CAN_MO_Transmit() and XMC_CAN_MO_Receive().
 * -# Allows to configure Single Data Transfer and Single Transmit Trial using functions 
 * XMC_CAN_MO_EnableSingleTransmitTrial() and XMC_CAN_MO_EnableSingleTransmitTrial().
 * -# Allows to configure MO events using function XMC_CAN_MO_EnableEvent(). 
 *
 * \par CAN_FIFO features:
 * -# Allows message object FIFO structure by configuration structure XMC_CAN_FIFO_CONFIG_t and functions 
 * XMC_CAN_TXFIFO_ConfigMOBaseObject() , XMC_CAN_RXFIFO_ConfigMOBaseObject() and XMC_CAN_TXFIFO_Transmit().  
 *
 * \par CAN_GATEWAY features:
 * -# Provides Gateway mode, configuration structure XMC_CAN_GATEWAY_CONFIG_t and function XMC_CAN_GATEWAY_InitSourceObject(). 
 *
 * @{
 */

/*********************************************************************************************************************
 * MACROS
 ********************************************************************************************************************/
#define XMC_CAN_MO_MOAR_STDID_Pos (18U)		/**< Standard Identifier bitposition */

#define XMC_CAN_MO_MOAR_STDID_Msk ((0x000007FFUL) << XMC_CAN_MO_MOAR_STDID_Pos) /**< Standard Identifier bitMask */

#define CAN_NODE_NIPR_Msk         (0x7UL)	/**< Node event mask */

#define CAN_MO_MOIPR_Msk          (0x7U)	/**< Message Object event mask */

/*********************************************************************************************************************
 * ENUMS
 ********************************************************************************************************************/
/**
 *  Defines the status of CAN, to verify the CAN related API calls. Use type \a XMC_CAN_STATUS_t for this enum.
*/
typedef enum XMC_CAN_STATUS
{
  XMC_CAN_STATUS_SUCCESS,           /**< Driver accepted application request*/
  XMC_CAN_STATUS_ERROR,             /**< Returned when unknown error occurred */
  XMC_CAN_STATUS_BUSY,              /**< Driver is busy and can not handle request*/
  XMC_CAN_STATUS_MO_NOT_ACCEPTABLE, /**< Message object type not allowed*/
  XMC_CAN_STATUS_MO_DISABLED       /**< Returned if Message object is disabled */
} XMC_CAN_STATUS_t;

/**
* Defines CAN module Panel Commands . Use type \a XMC_CAN_PANCMD_t for this enum.
*/
typedef enum XMC_CAN_PANCMD
{
  XMC_CAN_PANCMD_INIT_LIST = 1U,              /**< Command to initialize a list */
  XMC_CAN_PANCMD_STATIC_ALLOCATE = 2U,        /**< Command to activate static allocation */
  XMC_CAN_PANCMD_DYNAMIC_ALLOCATE = 3U,       /**< Command to activate dynamic allocation */

  XMC_CAN_PANCMD_STATIC_INSERT_BEFORE = 4U,	  /**< Remove a message object from the list and insert it before a given object.*/
  XMC_CAN_PANCMD_DYNAMIC_INSERT_BEFORE = 5U,  /**< Command to activate dynamic allocation */
  XMC_CAN_PANCMD_STATIC_INSERT_BEHIND = 6U,   /**< Command to activate dynamic allocation */
  XMC_CAN_PANCMD_DYNAMIC_INSERT_BEHIND = 7U   /**< Command to activate dynamic allocation */
} XMC_CAN_PANCMD_t;

/**
* Defines loop Back Mode, to enable/disable an in-system test of the MultiCAN module .
* Use type \a XMC_CAN_LOOKBACKMODE_t for this enum.
*/
typedef enum XMC_CAN_LOOKBACKMODE
{
  XMC_CAN_LOOKBACKMODE_ENABLED,   /**< Each CAN node can be connected to the internal CAN bus  */
  XMC_CAN_LOOKBACKMODE_DISABLED   /**< Each CAN node can be connected to the external CAN bus */
} XMC_CAN_LOOKBACKMODE_t;

/**
 * Defines Message Object direction. Use type \a XMC_CAN_MO_TYPE_t for this enum.
 */
typedef enum XMC_CAN_MO_TYPE
{
  XMC_CAN_MO_TYPE_RECMSGOBJ,   /**< Receive Message Object selected */
  XMC_CAN_MO_TYPE_TRANSMSGOBJ  /**< Transmit Message Object selected */
} XMC_CAN_MO_TYPE_t;

/**
 * Defines Data frame types. Use type \a XMC_CAN_FRAME_TYPE_t for this enum.
 */
typedef enum XMC_CAN_FRAME_TYPE
{
  XMC_CAN_FRAME_TYPE_STANDARD_11BITS, /**< Standard type identifier*/
  XMC_CAN_FRAME_TYPE_EXTENDED_29BITS  /**< Extended type identifier*/
} XMC_CAN_FRAME_TYPE_t;


/**
 * Defines arbitration mode for transmit acceptance filtering. Use type \a XMC_CAN_ARBITRATION_MODE_t for this enum.
 */
typedef enum XMC_CAN_ARBITRATION_MODE
{
  XMC_CAN_ARBITRATION_MODE_ORDER_BASED_PRIO_1 = 1U,   /**< Transmit acceptance based in the order(prio) */
  XMC_CAN_ARBITRATION_MODE_IDE_DIR_BASED_PRIO_2 = 2U, /**< Transmit acceptance filtering is based on the CAN identifier */
  XMC_CAN_ARBITRATION_MODE_ORDER_BASED_PRIO_3 = 3U    /**< Transmit acceptance based in the order */
} XMC_CAN_ARBITRATION_MODE_t;

/**
 * Defines the operation mode of the frame counter. Use type \a XMC_CAN_FRAME_COUNT_MODE_t for this enum.
 */
typedef enum XMC_CAN_FRAME_COUNT_MODE
{
  XMC_CAN_FRAME_COUNT_MODE = 0U, 			 /**< Frame Count Mode */
  XMC_CAN_FRAME_COUNT_MODE_TIME_STAMP = 1U,  /**< The frame counter is incremented with the beginning of a new bit time*/
  XMC_CAN_FRAME_COUNT_MODE_BIT_TIMING = 2U   /**< Used for baud rate detection and analysis of the bit timing */
} XMC_CAN_FRAME_COUNT_MODE_t;

/**
 * Defines the Divider Modes. Use type \a XMC_CAN_DM_t for this enum.
 */
typedef enum XMC_CAN_DM
{
  XMC_CAN_DM_NORMAL = 1U,      /**< Normal divider mode */
  XMC_CAN_DM_FRACTIONAL = 2U,  /**< Fractional divider mode */
  XMC_CAN_DM_OFF = 3U          /**< Divider Mode in off-state*/
} XMC_CAN_DM_t;

/**
 * Defines mask value for CAN Message Object set status. Use type \a XMC_CAN_MO_SET_STATUS_t for this enum.
 */
typedef enum XMC_CAN_MO_SET_STATUS
{
  XMC_CAN_MO_SET_STATUS_RX_PENDING = CAN_MO_MOCTR_SETRXPND_Msk,     /**< Set receive pending */
  XMC_CAN_MO_SET_STATUS_TX_PENDING = CAN_MO_MOCTR_SETTXPND_Msk,     /**< Set transmit pending */
  XMC_CAN_MO_SET_STATUS_RX_UPDATING = CAN_MO_MOCTR_SETRXUPD_Msk,    /**< Set receive updating */
  XMC_CAN_MO_SET_STATUS_NEW_DATA = CAN_MO_MOCTR_SETNEWDAT_Msk,      /**< Set new data */
  XMC_CAN_MO_SET_STATUS_MESSAGE_LOST = CAN_MO_MOCTR_SETMSGLST_Msk,  /**< Set message lost */
  XMC_CAN_MO_SET_STATUS_MESSAGE_VALID = CAN_MO_MOCTR_SETMSGVAL_Msk, /**< Set message valid */
  XMC_CAN_MO_SET_STATUS_RX_TX_SELECTED = CAN_MO_MOCTR_SETRTSEL_Msk, /**< Set transmit/receive selected */
  XMC_CAN_MO_SET_STATUS_RX_ENABLE = CAN_MO_MOCTR_SETRXEN_Msk,       /**< Set receive enable */
  XMC_CAN_MO_SET_STATUS_TX_REQUEST = CAN_MO_MOCTR_SETTXRQ_Msk,      /**< Set transmit request */
  XMC_CAN_MO_SET_STATUS_TX_ENABLE0 = CAN_MO_MOCTR_SETTXEN0_Msk,     /**< Set transmit enable 0 */
  XMC_CAN_MO_SET_STATUS_TX_ENABLE1 = CAN_MO_MOCTR_SETTXEN1_Msk,     /**< Set transmit enable 1 */
  XMC_CAN_MO_SET_STATUS_MESSAGE_DIRECTION = CAN_MO_MOCTR_SETDIR_Msk /**< Set message direction */
} XMC_CAN_MO_SET_STATUS_t;

/**
 * Defines mask value for CAN Message Object reset status. Use type \a XMC_CAN_MO_RESET_STATUS_t for this enum.
 */
typedef enum XMC_CAN_MO_RESET_STATUS
{
  XMC_CAN_MO_RESET_STATUS_RX_PENDING = CAN_MO_MOCTR_RESRXPND_Msk,     /**< Reset receive pending */
  XMC_CAN_MO_RESET_STATUS_TX_PENDING = CAN_MO_MOCTR_RESTXPND_Msk,     /**< Reset transmit pending */
  XMC_CAN_MO_RESET_STATUS_RX_UPDATING = CAN_MO_MOCTR_RESRXUPD_Msk,    /**< Reset receive updating */
  XMC_CAN_MO_RESET_STATUS_NEW_DATA = CAN_MO_MOCTR_RESNEWDAT_Msk,      /**< Reset new data */
  XMC_CAN_MO_RESET_STATUS_MESSAGE_LOST = CAN_MO_MOCTR_RESMSGLST_Msk,  /**< Reset message lost */
  XMC_CAN_MO_RESET_STATUS_MESSAGE_VALID = CAN_MO_MOCTR_RESMSGVAL_Msk, /**< Reset message valid */
  XMC_CAN_MO_RESET_STATUS_RX_TX_SELECTED = CAN_MO_MOCTR_RESRTSEL_Msk, /**< Reset transmit/receive selected */
  XMC_CAN_MO_RESET_STATUS_RX_ENABLE = CAN_MO_MOCTR_RESRXEN_Msk,       /**< Reset receive enable */
  XMC_CAN_MO_RESET_STATUS_TX_REQUEST = CAN_MO_MOCTR_RESTXRQ_Msk,      /**< Reset transmit request */
  XMC_CAN_MO_RESET_STATUS_TX_ENABLE0 = CAN_MO_MOCTR_RESTXEN0_Msk,     /**< Reset transmit enable 0 */
  XMC_CAN_MO_RESET_STATUS_TX_ENABLE1 = CAN_MO_MOCTR_RESTXEN1_Msk,     /**< Reset transmit enable 1 */
  XMC_CAN_MO_RESET_STATUS_MESSAGE_DIRECTION = CAN_MO_MOCTR_RESDIR_Msk /**< Reset message direction */
} XMC_CAN_MO_RESET_STATUS_t;

/**
 * Defines mask value for CAN Message Object status. Use type \a XMC_CAN_MO_STATUS_t for this enum.
 */
typedef enum XMC_CAN_MO_STATUS
{
  XMC_CAN_MO_STATUS_RX_PENDING = CAN_MO_MOSTAT_RXPND_Msk,                   /**< Defines message has been successfully received or not received */
  XMC_CAN_MO_STATUS_TX_PENDING = CAN_MO_MOSTAT_TXPND_Msk,                   /**< Defines message has been successfully transmitted or not transmitted */
  XMC_CAN_MO_STATUS_RX_UPDATING = CAN_MO_MOSTAT_RXUPD_Msk,                  /**< Defines Message identifier, DLC, and data of the message object are currently updated or not updated */
  XMC_CAN_MO_STATUS_NEW_DATA = CAN_MO_MOSTAT_NEWDAT_Msk,                    /**< Defines no update of the message object since last flag reset or Message object has been updated */
  XMC_CAN_MO_STATUS_MESSAGE_LOST = CAN_MO_MOSTAT_MSGLST_Msk,                /**< CAN message is lost because NEWDAT has become set again when it has already been set or No CAN message is lost */
  XMC_CAN_MO_STATUS_MESSAGE_VALID = CAN_MO_MOSTAT_MSGVAL_Msk,               /**< Message valid */
  XMC_CAN_MO_STATUS_RX_TX_SELECTED = CAN_MO_MOSTAT_RTSEL_Msk,               /**< Transmit/Receive selected */
  XMC_CAN_MO_STATUS_RX_ENABLE = CAN_MO_MOSTAT_RXEN_Msk,                     /**< Receive enable */
  XMC_CAN_MO_STATUS_TX_REQUEST = CAN_MO_MOSTAT_TXRQ_Msk,                    /**< Transmit request */
  XMC_CAN_MO_STATUS_TX_ENABLE0 = CAN_MO_MOSTAT_TXEN0_Msk,                   /**< Transmit enable 0 */
  XMC_CAN_MO_STATUS_TX_ENABLE1 = CAN_MO_MOSTAT_TXEN1_Msk,                   /**< Transmit enable 1 */
  XMC_CAN_MO_STATUS_MESSAGE_DIRECTION = CAN_MO_MOSTAT_DIR_Msk,              /**< Message direction */
  XMC_CAN_MO_STATUS_LIST = CAN_MO_MOSTAT_LIST_Msk,                          /**< List allocation */
  XMC_CAN_MO_STATUS_POINTER_TO_PREVIOUS_MO = CAN_MO_MOSTAT_PPREV_Msk,    	/**< Pointer to previous Message Object */
  XMC_CAN_MO_STATUS_POINTER_TO_NEXT_MO = (int32_t)CAN_MO_MOSTAT_PNEXT_Msk   /**< Pointer to next Message Object */
} XMC_CAN_MO_STATUS_t;

/**
 * Defines mask value for CAN Node status. Use type \a XMC_CAN_NODE_STATUS_t for this enum.
 */
typedef enum XMC_CAN_NODE_STATUS
{
  XMC_CAN_NODE_STATUS_LAST_ERROR_CODE = CAN_NODE_NSR_LEC_Msk,       /**< Last Error Code */
  XMC_CAN_NODE_STATUS_TX_OK = CAN_NODE_NSR_TXOK_Msk,                /**< Message transmitted successfully */
  XMC_CAN_NODE_STATUS_RX_OK = CAN_NODE_NSR_RXOK_Msk,                /**< Message received successfully */
  XMC_CAN_NODE_STATUS_ALERT_WARNING = CAN_NODE_NSR_ALERT_Msk,       /**< Alert warning */
  XMC_CAN_NODE_STATUS_ERROR_WARNING_STATUS = CAN_NODE_NSR_EWRN_Msk, /**< Error warning status */
  XMC_CAN_NODE_STATUS_BUS_OFF= CAN_NODE_NSR_BOFF_Msk,				/**< Bus-off status */
  XMC_CAN_NODE_STATUS_LIST_LENGTH_ERROR = CAN_NODE_NSR_LLE_Msk,     /**< List length error */
  XMC_CAN_NODE_STATUS_LIST_OBJECT_ERROR = CAN_NODE_NSR_LOE_Msk,     /**< List object error */
#if !defined(MULTICAN_PLUS)
  XMC_CAN_NODE_STATUS_SUSPENDED_ACK = CAN_NODE_NSR_SUSACK_Msk       /**< Suspend Acknowledge */
#endif
} XMC_CAN_NODE_STATUS_t;

/**
 * Defines mask value for CAN Node control like initialization, node disable and analyzer mode .
 * Use type \a XMC_CAN_NODE_CONTROL_t for this enum.
 */
typedef enum XMC_CAN_NODE_CONTROL
{
  XMC_CAN_NODE_CONTROL_NODE_INIT = CAN_NODE_NCR_INIT_Msk,            /**< Node initialization */
  XMC_CAN_NODE_CONTROL_TX_INT_ENABLE = CAN_NODE_NCR_TRIE_Msk,        /**< Transfer event enable */
  XMC_CAN_NODE_CONTROL_LEC_INT_ENABLE = CAN_NODE_NCR_LECIE_Msk,      /**< LEC Indicated Error Event Enable */
  XMC_CAN_NODE_CONTROL_ALERT_INT_ENABLE = CAN_NODE_NCR_ALIE_Msk,     /**< Alert Event Enable */
  XMC_CAN_NODE_CONTROL_CAN_DISABLE = CAN_NODE_NCR_CANDIS_Msk,        /**< CAN disable */
  XMC_CAN_NODE_CONTROL_CONF_CHANGE_ENABLE= CAN_NODE_NCR_CCE_Msk,     /**< Configuration change enable */
  XMC_CAN_NODE_CONTROL_CAN_ANALYZER_NODEDE = CAN_NODE_NCR_CALM_Msk,  /**< CAN Analyzer mode */
#if !defined(MULTICAN_PLUS)
  XMC_CAN_NODE_CONTROL_SUSPENDED_ENABLE = CAN_NODE_NCR_SUSEN_Msk     /**< Suspend Enable */
#endif
} XMC_CAN_NODE_CONTROL_t;

/**
 * Defines mask value for CAN Node events. Use type \a XMC_CAN_NODE_EVENT_t for this enum.
 */
typedef enum XMC_CAN_NODE_EVENT
{
  XMC_CAN_NODE_EVENT_TX_INT = CAN_NODE_NCR_TRIE_Msk,   /**< Node Transfer OK Event */
  XMC_CAN_NODE_EVENT_ALERT = CAN_NODE_NCR_ALIE_Msk,    /**< Node Alert Event */
  XMC_CAN_NODE_EVENT_LEC = CAN_NODE_NCR_LECIE_Msk,     /**< Last Error code Event */
  XMC_CAN_NODE_EVENT_CFCIE = CAN_NODE_NFCR_CFCIE_Msk   /**< CAN Frame Count Event  */
} XMC_CAN_NODE_EVENT_t;

/**
 * Defines mask value for CAN node pointer events position. Use type \a XMC_CAN_NODE_POINTER_EVENT_t for this enum.
 */
typedef enum XMC_CAN_NODE_POINTER_EVENT
{
  XMC_CAN_NODE_POINTER_EVENT_ALERT = CAN_NODE_NIPR_ALINP_Pos,           /**< Node Alert Event node pointer */
  XMC_CAN_NODE_POINTER_EVENT_LEC = CAN_NODE_NIPR_LECINP_Pos,            /**< Last Error code Event node pointer */
  XMC_CAN_NODE_POINTER_EVENT_TRANSFER_OK = CAN_NODE_NIPR_TRINP_Pos,     /**< Transmit Event node pointer */
  XMC_CAN_NODE_POINTER_EVENT_FRAME_COUNTER = CAN_NODE_NIPR_CFCINP_Pos   /**< CAN Frame Count Event node pointer */
} XMC_CAN_NODE_POINTER_EVENT_t;

/**
 * Defines CAN Message Object event node pointer position. Use type \a XMC_CAN_MO_POINTER_EVENT_t for this enum.
 */
typedef enum XMC_CAN_MO_POINTER_EVENT
{
  XMC_CAN_MO_POINTER_EVENT_TRANSMIT = CAN_MO_MOIPR_TXINP_Pos,     /**< Transmit Event node pointer */
  XMC_CAN_MO_POINTER_EVENT_RECEIVE = CAN_MO_MOIPR_RXINP_Pos       /**< Receive Event node pointer */
} XMC_CAN_MO_POINTER_EVENT_t;

/**
 * Defines mask value for CAN Message Object event type. Use type \a XMC_CAN_MO_EVENT_t for this enum.
 */
typedef enum XMC_CAN_MO_EVENT
{
  XMC_CAN_MO_EVENT_TRANSMIT = CAN_MO_MOFCR_TXIE_Msk,  /**< Message Object transmit event */
  XMC_CAN_MO_EVENT_RECEIVE = CAN_MO_MOFCR_RXIE_Msk,   /**< Message Object receive event */
  XMC_CAN_MO_EVENT_OVERFLOW = CAN_MO_MOFCR_OVIE_Msk,  /**< Message Object overflow event */
} XMC_CAN_MO_EVENT_t;

/**
 * Defines the possible receive inputs. Use type \a XMC_CAN_NODE_RECEIVE_INPUT_t for this enum.
 */
typedef enum XMC_CAN_NODE_RECEIVE_INPUT
{
  XMC_CAN_NODE_RECEIVE_INPUT_RXDCA, 	/**< CAN Receive Input A */
  XMC_CAN_NODE_RECEIVE_INPUT_RXDCB,		/**< CAN Receive Input B */
  XMC_CAN_NODE_RECEIVE_INPUT_RXDCC,		/**< CAN Receive Input C */
  XMC_CAN_NODE_RECEIVE_INPUT_RXDCD,		/**< CAN Receive Input D */
  XMC_CAN_NODE_RECEIVE_INPUT_RXDCE,		/**< CAN Receive Input E */
  XMC_CAN_NODE_RECEIVE_INPUT_RXDCF,		/**< CAN Receive Input F */
  XMC_CAN_NODE_RECEIVE_INPUT_RXDCG,		/**< CAN Receive Input G */
  XMC_CAN_NODE_RECEIVE_INPUT_RXDCH		/**< CAN Receive Input H */
} XMC_CAN_NODE_RECEIVE_INPUT_t;

/**
 * Defines last error transfer direction. Use type \a XMC_CAN_NODE_LAST_ERROR_DIR_t for this enum.
 */
typedef enum XMC_CAN_NODE_LAST_ERROR_DIR
{
  XMC_CAN_NODE_LAST_ERROR_DIR_WHILE_NODE_RECEPCION,    /**< The last error occurred while the CAN node x was receiver */
  XMC_CAN_NODE_LAST_ERROR_DIR_WHILE_NODE_TRANSMISSION  /**< The last error occurred while the CAN node x was transmitter */
} XMC_CAN_NODE_LAST_ERROR_DIR_t;


/**
 * Defines last error increment. Use type \a XMC_CAN_NODE_LAST_ERROR_INC_t for this enum.
 */
typedef enum XMC_CAN_NODE_LAST_ERROR_INC
{
  XMC_CAN_NODE_LAST_ERROR_INC_1, /**< The last error led to an error counter increment of 1. */
  XMC_CAN_NODE_LAST_ERROR_INC_8  /**< The last error led to an error counter increment of 8. */
} XMC_CAN_NODE_LAST_ERROR_INC_t;

/**
 * Defines interrupt request on interrupt output line INT_O[n]. Use type \a XMC_CAN_NODE_INTERRUPT_TRIGGER_t for this enum.
 */
typedef enum XMC_CAN_NODE_INTERRUPT_TRIGGER
{
  XMC_CAN_NODE_INTR_TRIGGER_0 = 0x1U,
  XMC_CAN_NODE_INTR_TRIGGER_1 = 0x2U,
  XMC_CAN_NODE_INTR_TRIGGER_2 = 0x4U,
  XMC_CAN_NODE_INTR_TRIGGER_3 = 0x8U,
  XMC_CAN_NODE_INTR_TRIGGER_4 = 0x16U,
  XMC_CAN_NODE_INTR_TRIGGER_5 = 0x32U,
  XMC_CAN_NODE_INTR_TRIGGER_6 = 0x64U,
  XMC_CAN_NODE_INTR_TRIGGER_7 = 0x128U,
} XMC_CAN_NODE_INTERRUPT_TRIGGER_t;

#if defined(MULTICAN_PLUS) || defined(DOXYGEN)
/**
 * Defines the Clock source used for the MCAN peripheral. @note Only available for XMC1400, XMC4800 and XMC4700 series
 */
typedef enum XMC_CAN_CANCLKSRC
{
#if UC_FAMILY == XMC4
  XMC_CAN_CANCLKSRC_FPERI = 0x1U,
  XMC_CAN_CANCLKSRC_FOHP = 0x2U,
#else
  XMC_CAN_CANCLKSRC_MCLK = 0x1U,
  XMC_CAN_CANCLKSRC_FOHP = 0x2U
#endif
} XMC_CAN_CANCLKSRC_t;
#endif

/*********************************************************************************************************************
 * DATA STRUCTURES
 ********************************************************************************************************************/
/**
 * Defines CAN node Nominal Bit Time. Use type \a XMC_CAN_NODE_NOMINAL_BIT_TIME_CONFIG_t for this structure.
*/
typedef struct XMC_CAN_NODE_NOMINAL_BIT_TIME_CONFIG
{
  uint32_t can_frequency;       /**< Frequency of the CAN module(fCAN). \a can_frequency shall be range of 5MHz to 120MHz */
  uint32_t baudrate;        	/**< Specifies the node baud rate. Unit: baud \a baudrate shall be range of 100Kbps to 1000Kbps*/
  uint16_t sample_point;    	/**< Sample point is used to compensate mismatch between transmitter and receiver clock phases detected in
									 the synchronization segment. Sample point. Range = [0, 10000] with respect [0%, 100%] of the total bit time.*/
  uint16_t sjw;             	/**< (Re) Synchronization Jump Width. Range:0-3 */
} XMC_CAN_NODE_NOMINAL_BIT_TIME_CONFIG_t;

/**
 * Defines base, top and bottom of CAN Message Object FIFO Structure. Use type \a XMC_CAN_FIFO_CONFIG_t for this structure.
 * A FIFO consists of one base object and n slave objects.
 */
typedef struct XMC_CAN_FIFO_CONFIG
{
  uint8_t fifo_bottom;		/**< points to the first element(slave object) in a FIFO structure.Range :0-63*/
  uint8_t fifo_top;			/**< points to the last element(slave object) in a FIFO structure. Range :0-63*/
  uint8_t fifo_base;		/**< points to the actual target object(Base object) within a FIFO/Gateway structure. Range :0-63*/
} XMC_CAN_FIFO_CONFIG_t;

/**
 * Defines CAN Gateway FIFO structure and provides additional options for gateway destination object.
 * Use type \a XMC_CAN_GATEWAY_CONFIG_t for this structure.
 */
typedef struct XMC_CAN_GATEWAY_CONFIG
{
  uint8_t gateway_bottom; 			/**< points to the first element(gateway destination object) in a FIFO structure. Range :0-63*/
  uint8_t gateway_top;				/**< points to the last element(gateway destination object) in a FIFO structure.  Range :0-63*/
  uint8_t gateway_base;				/**< points to the actual target object within a FIFO/Gateway structure. Range :0-63*/
  bool gateway_data_frame_send;		/**< TXRQ updated in the gateway destination object after the internal transfer from the gateway source
  	  	  	  	  	  	  	  	  	  	 to the gateway destination object */
  bool gateway_identifier_copy;		/**< The identifier of the gateway source object (after storing the received frame in the source) is copied
  	  	  	  	  	  	  	  	  	  	 to the gateway destination object. */

  bool gateway_data_length_code_copy; /**< Data length code of the gateway source object (after storing the received frame in the source) is copied to the
  	  	  	  	  	  	  	  	  	  	   gateway destination object */
  bool gateway_data_copy;  /**< Data fields in registers MODATALn and MODATAHn of the gateway source object (after storing the received frame in the source)
  	  	  	  	  	  	  	  	are copied to the gateway destination.*/

} XMC_CAN_GATEWAY_CONFIG_t;

/**
* Defines CAN Global Initialization structure
*/
typedef CAN_GLOBAL_TypeDef XMC_CAN_t;

/*Anonymous structure/union guard start*/
#if defined(__CC_ARM)
  #pragma push
  #pragma anon_unions
#elif defined(__TASKING__)
  #pragma warning 586
#endif

/**
 * Defines frame counter configuration. Use type \a XMC_CAN_NODE_FRAME_COUNTER_t for this structure.
 * It provides configuration of frame counter that counts transmitted/received CAN frames or obtains information about the time
 * when a frame has been started to transmit or be received by the CAN node.
*/
typedef struct XMC_CAN_NODE_FRAME_COUNTER
{

  union{
	  struct{
		  uint32_t : 16;
		  uint32_t can_frame_count_selection:3;		/**<   Defines function of the frame counter  */
		  uint32_t can_frame_count_mode:2;			/**<   Determines the operation mode of the frame counter */
		  uint32_t : 11;
	  };
	  uint32_t nfcr;

  };
} XMC_CAN_NODE_FRAME_COUNTER_t;

/**
 *Defines Node Runtime structure.
*/
typedef CAN_NODE_TypeDef  XMC_CAN_NODE_t;            /**<  pointer to the Node CAN register */

/**
 * Defines CAN Message Object runtime elements. Use type \a XMC_CAN_MO_t for this structure.
 */
typedef struct XMC_CAN_MO
{
	CAN_MO_TypeDef *can_mo_ptr;                     /**< Pointer to the Message Object CAN register */
	union{
		struct{
			uint32_t can_identifier:29;            /**< standard (11 bit)/Extended (29 bit) message identifier */
			uint32_t can_id_mode:1;                /**< Standard/Extended identifier support */
			uint32_t can_priority:2;               /**< Arbitration Mode/Priority */
		};
		uint32_t mo_ar;
	};
	union{
		struct{
			uint32_t can_id_mask:29;              /**< CAN Identifier of Message Object */
			uint32_t can_ide_mask:1;              /**< Identifier Extension Bit of Message Object */
		};
		uint32_t mo_amr;
	};
  uint8_t can_data_length;                        /**< Message data length, Range:0-8 */

  union{

  		uint8_t can_data_byte[8];                 /**< Each position of the array represents a data byte*/
  		uint16_t can_data_word[4];                /**< Each position of the array represents a 16 bits data word*/
  		uint32_t can_data[2];                     /**< can_data[0] lower 4 bytes of the data. can_data[1], higher 4 bytes
  		 	 	 	 	 	 	 	 	 	 	    of the data */
  		uint64_t can_data_long;                   /** Data of the Message Object*/
  	  };

  XMC_CAN_MO_TYPE_t can_mo_type;                  /**<  Message Type */

} XMC_CAN_MO_t;
/*Anonymous structure/union guard end*/
#if defined(__CC_ARM)
  #pragma pop
#elif defined(__TASKING__)
  #pragma warning restore
#endif
/*********************************************************************************************************************
 * API Prototypes
 ********************************************************************************************************************/
#ifdef __cplusplus
extern "C" {
#endif

/**
 *
 * @param obj	Pointer pointing to XMC_CAN Global Initialization structure. Defines CAN global registers,refer CAN_NODE_TypeDef
 * 				for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Disables CAN module. In disabled state, no registers of CAN module can be read or written except the CAN_CLC register.
 *
 * \par<b>Related APIs:</b><BR>
 * XMC_CAN_Enable()\n\n\n
 *
 */

void XMC_CAN_Disable(XMC_CAN_t *const obj);

/**
 *
 * @param obj Pointer pointing to XMC_CAN Global Initialization structure. Defines CAN global registers,refer CAN_NODE_TypeDef
 * 			   for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Enables CAN module and initializes all CAN registers to reset values. It is required to re-configure desired CAN nodes,
 *  before any data transfer. It configures CAN_CLC.DISR bit.
 *
 * \par<b>Related APIs:</b><BR>
 *  XMC_CAN_Disable()\n\n\n
 *
 */

void XMC_CAN_Enable(XMC_CAN_t *const obj);

/**
 *
 * @param obj Pointer pointing to XMC_CAN Global Initialization structure. Defines CAN global registers,refer CAN_NODE_TypeDef
 * 		   for details.
 *
 * @param node_num	CAN node number,Range : 0-2
 * @param mo_num 	CAN Message Object number,Range : 0-63
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Allocates Message Object from free list to node list. Each \a node_num is linked to one unique list of message objects.
 *  A CAN node performs message transfer only with the \a mo_num message objects that are allocated to the list of the CAN node.
 *  It configures PANCTR register.
 *
 * \par<b>Related APIs:</b><BR>
 *  None
 *
 */

void XMC_CAN_AllocateMOtoNodeList(XMC_CAN_t *const obj, const uint8_t node_num, const uint8_t mo_num);

/**
 *
 * @param obj Pointer pointing to XMC_CAN Global Initialization structure. Defines CAN global registers,refer CAN_NODE_TypeDef
 *       for details.
 *
 * @return Ready status of list controller
 *
 * \par<b>Description:</b><br>
 *  Returns ready status of the list controller
 *
 * \par<b>Related APIs:</b><BR>
 *  XMC_CAN_PanelControl()
 *
 */
__STATIC_INLINE bool XMC_CAN_IsPanelControlReady(XMC_CAN_t *const obj)
{
  return (bool)((obj->PANCTR & (CAN_PANCTR_BUSY_Msk | CAN_PANCTR_RBUSY_Msk)) == 0);
}

/**
 *
 * @param obj Pointer pointing to XMC_CAN Global Initialization structure. Defines CAN global registers,refer CAN_NODE_TypeDef
 * 			  for details.
 *
 * @param pancmd panal command selection. Refer @ref XMC_CAN_PANCMD_t for valid values.
 * @param arg1	 Panel Argument 1,Range : 0-2
 * @param arg2 	 Panel Argument 2, Range : 0-63
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Configures the panel command and panel arguments. A panel operation consists of a command code (PANCMD) and up to two
 *  panel arguments (PANAR1, PANAR2). Commands that have a return value deliver it to the PANAR1 bit field. Commands that
 *  return an error flag deliver it to bit 31 of the Panel Control Register, this means bit 7 of PANAR2. \a arg1 represents
 *  panel argument PANAR1,\a arg2 represents panel argument PANAR2 and \a pancmd represents command code. It configures PANCTR
 *  register.
 *
 * \par<b>Related APIs:</b><BR>
 *  None
 *
 */

__STATIC_INLINE void XMC_CAN_PanelControl(XMC_CAN_t *const obj,
                                          const XMC_CAN_PANCMD_t pancmd,
		                                  const uint8_t arg1,
		                                  const uint8_t arg2)
{
  obj->PANCTR = (((uint32_t)pancmd << CAN_PANCTR_PANCMD_Pos) & (uint32_t)CAN_PANCTR_PANCMD_Msk) |
		        (((uint32_t)arg1 << CAN_PANCTR_PANAR1_Pos) & (uint32_t)CAN_PANCTR_PANAR1_Msk) |
		        (((uint32_t)arg2 << CAN_PANCTR_PANAR2_Pos) & (uint32_t)CAN_PANCTR_PANAR2_Msk);
}


/**
 *
 * @param obj Pointer pointing to XMC_CAN Global Initialization structure. Defines CAN global registers,refer CAN_NODE_TypeDef
 * 			  for details.
 *
 * @param service_requestr	Interrupt trigger number selection. Refer @ref XMC_CAN_NODE_INTERRUPT_TRIGGER_t for valid values.
 * 							 Multiple interrupt trigger events can be ORed.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Configures multiple interrupt requests with a single write operation. \a service_requestr represents single interrupt
 *  request or multiple.It configures MITR register.
 *
 * \par<b>Related APIs:</b><BR>
 *  None
 *
 */

__STATIC_INLINE void XMC_CAN_EventTrigger(XMC_CAN_t *const obj,const XMC_CAN_NODE_INTERRUPT_TRIGGER_t service_requestr)
{
  obj->MITR = ((uint32_t)service_requestr << CAN_MITR_IT_Pos) & (uint32_t)CAN_MITR_IT_Msk;
}



								/*INIT APIs*/

/**
 *
 * @param obj Pointer pointing to XMC_CAN Global Initialization structure. Defines CAN global registers,refer CAN_NODE_TypeDef
 * 			  for details.
 *
 * @param can_frequency	CAN module frequency(fCAN). Range : 5MHz to 120MHz
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Configures clock rate of the module timer clock fCAN. Altering CAN module \a can_frequency shall affects baud rate,
 * call XMC_CAN_NODE_NominalBitTimeConfigure() to configure baud rate for current CAN frequency.It configures FDR register.
 *
 * \par<b>Related APIs:</b><BR>
 * XMC_CAN_NODE_NominalBitTimeConfigure()\n\n\n
 *
 */


#if defined(MULTICAN_PLUS)
void XMC_CAN_Init(XMC_CAN_t *const obj, XMC_CAN_CANCLKSRC_t clksrc, uint32_t can_frequency);
/**
 *
 */
XMC_CAN_CANCLKSRC_t XMC_CAN_GetBaudrateClockSource(XMC_CAN_t *const obj);
/**
 *
 */
void XMC_CAN_SetBaudrateClockSource(XMC_CAN_t *const obj,const XMC_CAN_CANCLKSRC_t source);
/**
 *
 */
uint32_t XMC_CAN_GetBaudrateClockFrequency(XMC_CAN_t *const obj);
#else
void XMC_CAN_Init(XMC_CAN_t *const obj, uint32_t can_frequency);
#endif

/**
 *
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Initializes CAN message object. Initialization includes configuring Message Object identifier type, Message Object
 * identifier value, Message Object type, and transfer requests. It configures FDR register.
 *
 * \par<b>Related APIs:</b><BR>
 * None
 *
 */

void XMC_CAN_MO_Config(const XMC_CAN_MO_t *const can_mo);


	  /*NODE APIs*/


/**
 *
 * @param can_node  	  Pointer pointing to CAN_NODE Structure. Defines CAN_NODE registers.
 * @param ptr_event		  CAN_NODE interrupt pointer position. Refer @ref XMC_CAN_NODE_POINTER_EVENT_t structure for valid values.
 * @param service_request Interrupt service request number. Range : 0-7
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Configures node interrupt pointer \a service_request for CAN Node events \a ptr_event. It configures NIPR register.
 *
 * \par<b>Related APIs:</b><BR>
 * None
 *
 */

__STATIC_INLINE void XMC_CAN_NODE_SetEventNodePointer(XMC_CAN_NODE_t *const can_node,
		                                      const XMC_CAN_NODE_POINTER_EVENT_t ptr_event,
		                                      const uint32_t service_request)
{
  can_node->NIPR = (uint32_t)((can_node->NIPR) & ~(uint32_t)(CAN_NODE_NIPR_Msk << (uint32_t)ptr_event)) | (service_request << (uint32_t)ptr_event);
}


/**
 *
 * @param can_node		Pointer pointing to CAN_NODE Structure. Defines CAN_NODE registers. Range :CAN_NODE0-CAN_NODE2
 * @param can_bit_time	Nominal bit time configuration data structure. Refer @ref XMC_CAN_NODE_NOMINAL_BIT_TIME_CONFIG_t for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Configures CAN node Baudrate. \a can_bit_time specifies required baudrate for a specified \a can_node.
 * It configures NBTR register.
 *
 * \par<b>Related APIs:</b><BR>
 * None
 *
 */
void XMC_CAN_NODE_NominalBitTimeConfigure (XMC_CAN_NODE_t *const can_node,
                                           const XMC_CAN_NODE_NOMINAL_BIT_TIME_CONFIG_t *const can_bit_time);

/**
 * @param can_node Pointer pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 * @param input    CAN receive input selection. Refer @ref XMC_CAN_NODE_RECEIVE_INPUT_t for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * \a input specifies CAN input receive pin. This API Configures NPCRx register,it is required to call
 * XMC_CAN_NODE_EnableConfigurationChange(), before configuring NPCRx register, call XMC_CAN_NODE_DisableConfigurationChange()
 * API after configuring NPCRx register. CAN input receive pins which falls under analog port pins should call
 * XMC_GPIO_EnableDigitalInput(),to enable digital pad.
 *
 *\par<b>Related APIs:</b><BR>
 * None
 *
 * \par<b>Note:</b><br>
 * NPCRx can be written only if bit NCRx.CCE is set.
 *
 */

__STATIC_INLINE void XMC_CAN_NODE_SetReceiveInput(XMC_CAN_NODE_t *const can_node,
		                                          const XMC_CAN_NODE_RECEIVE_INPUT_t input)
{
  can_node->NPCR = ((can_node->NPCR) & ~(uint32_t)(CAN_NODE_NPCR_RXSEL_Msk)) |
                   (((uint32_t)input << CAN_NODE_NPCR_RXSEL_Pos) & (uint32_t)CAN_NODE_NPCR_RXSEL_Msk);
}


/**
 * @param can_node	Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Enable Node \a can_node in Loop-Back Mode. A Node is connected to an internal (virtual) loop-back CAN bus. All CAN
 * nodes which are in Loop- Back Mode are connected to this virtual CAN bus so that they can communicate with each
 * other internally. The external transmit line is forced recessive in Loop-Back Mode. This API Configures NPCRx register.
 * call XMC_CAN_NODE_EnableConfigurationChange() API before NPCRx configuration, same way XMC_CAN_NODE_DisableConfigurationChange()
 * API after NPCRx configuration configuration.
 *
 * \par<b>Related APIs:</b><BR>]
 *  XMC_CAN_NODE_DisableLoopBack().
 *
 *  \par<b>Note:</b><br>
 *  NPCRx can be written only if bit NCRx.CCE is set.
 *
 */

__STATIC_INLINE void XMC_CAN_NODE_EnableLoopBack(XMC_CAN_NODE_t *const can_node)
{
  can_node->NPCR |= (uint32_t)CAN_NODE_NPCR_LBM_Msk;
}


/**
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Disable Node Loop-Back Mode, disables internal (virtual) loop-back CAN bus. This API Configures NPCRx register.
 * Call XMC_CAN_NODE_EnableConfigurationChange() API before NPCRx configuration, same way XMC_CAN_NODE_DisableConfigurationChange()
 * API after NPCRx configuration.
 *
 * \par<b>Related APIs:</b><BR>]
 * XMC_CAN_NODE_EnableLoopBack()
 *
 *
 * \par<b>Note:</b><br>
 * NPCRx can be written only if bit NCRx.CCE is set.
 *
 */

__STATIC_INLINE void XMC_CAN_NODE_DisableLoopBack(XMC_CAN_NODE_t *const can_node)
{
  can_node->NPCR &= ~(uint32_t)CAN_NODE_NPCR_LBM_Msk;
}


/**
 *
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 * @param event	   CAN node event mask value. Refer @ref XMC_CAN_NODE_EVENT_t structure for valid values.
 * 				   multiple events can be ORed.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Enable CAN Node events. It configures NFCR register.
 *
 * \par<b>Related APIs:</b><BR>
 * XMC_CAN_NODE_DisableEvent()
 *
 */

void XMC_CAN_NODE_EnableEvent(XMC_CAN_NODE_t *const can_node, const XMC_CAN_NODE_EVENT_t event);


/**
 *
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 * @param event	   CAN node event mask value. Refer @ref XMC_CAN_NODE_EVENT_t structure for valid values.
 * 				   multiple events can be ORed.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Disable CAN Node events. It configures NFCR register.
 *
 * \par<b>Related APIs:</b><BR>
 * XMC_CAN_NODE_EnableEvent()
 *
 */

void XMC_CAN_NODE_DisableEvent(XMC_CAN_NODE_t *const can_node, const XMC_CAN_NODE_EVENT_t event);


/**
 *
 * @param node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 *
 * @return XMC_CAN_NODE_LAST_ERROR_DIR_t Last error transfer direction. Refer @ref XMC_CAN_NODE_LAST_ERROR_DIR_t.
 *
 * \par<b>Description:</b><br>
 * Returns NODE Last Error occurred during Transmit/receive direction. It returns value of NFCR register.
 *
 * \par<b>Related APIs:</b><BR>
 * XMC_CAN_NODE_GetLastErrTransferInc()\n\n\n
 *
 */

__STATIC_INLINE XMC_CAN_NODE_LAST_ERROR_DIR_t XMC_CAN_NODE_GetLastErrTransferDir(XMC_CAN_NODE_t *const node)
{
  return (XMC_CAN_NODE_LAST_ERROR_DIR_t)(((node->NECNT) & CAN_NODE_NECNT_LETD_Msk) >> CAN_NODE_NECNT_LETD_Pos);
}


/**
 *
 * @param node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 *
 * @return XMC_CAN_NODE_LAST_ERROR_INC_t Last error transfer increment. Refer @ref XMC_CAN_NODE_LAST_ERROR_INC_t.
 *
 * \par<b>Description:</b><br>
 *  Returns NODE Last Error Transfer Increment. It returns value of NFCR register.
 *
 * \par<b>Related APIs:</b><BR>
 * XMC_CAN_NODE_GetLastErrTransferDir()\n\n\n
 *
 */

__STATIC_INLINE XMC_CAN_NODE_LAST_ERROR_INC_t XMC_CAN_NODE_GetLastErrTransferInc(XMC_CAN_NODE_t *const node)
{
  return (XMC_CAN_NODE_LAST_ERROR_INC_t)(((node->NECNT) & CAN_NODE_NECNT_LEINC_Msk)>> CAN_NODE_NECNT_LEINC_Pos);
}


/**
 *
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 * @param  error_warning_level	Error Warning level value. Range :0-255.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Configures error warning level in order to set the corresponding error warning bit EWRN. It configures \a error_warning_level
 * into NECNT register. Before this configuration call XMC_CAN_NODE_EnableConfigurationChange() API.
 *
 * \par<b>Related APIs:</b><BR>
 * XMC_CAN_NODE_GetErrorWarningLevel()\n\n\n
 *
 * \par<b>Note:</b><br>
 *  NECNTx can be written only if bit NCRx.CCE is set.
 *
 */

__STATIC_INLINE void XMC_CAN_NODE_SetErrorWarningLevel(XMC_CAN_NODE_t *const can_node, uint8_t error_warning_level)
{
  can_node->NECNT = ((can_node->NECNT) & ~(uint32_t)(CAN_NODE_NECNT_EWRNLVL_Msk)) |
                    (((uint32_t)error_warning_level << CAN_NODE_NECNT_EWRNLVL_Pos) & (uint32_t)CAN_NODE_NECNT_EWRNLVL_Msk);
}


/**
 *
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 * @param can_tec  transmit error counter value. Range :0-255
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Configures Transmit error counter. It configures \a can_tec into NECNT register. Before this configuration call
 *  XMC_CAN_NODE_EnableConfigurationChange() API.
 *
 * \par<b>Related APIs:</b><BR>
 * XMC_CAN_NODE_GetTransmitErrorCounter()\n\n\n
 *
 *  \par<b>Note:</b><br>
 *  NECNTx can be written only if bit NCRx.CCE is set.
 *
 */


__STATIC_INLINE void XMC_CAN_NODE_SetTransmitErrorCounter(XMC_CAN_NODE_t *const can_node, uint8_t can_tec)
{
  can_node->NECNT = ((can_node->NECNT) & ~(uint32_t)(CAN_NODE_NECNT_TEC_Msk)) |
                    (((uint32_t)can_tec << CAN_NODE_NECNT_TEC_Pos) & (uint32_t)CAN_NODE_NECNT_TEC_Msk);
}


/**
 *
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 * @param can_rec  receive error counter value. Range :0-255
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Configures Receive Error Counter. It configures \a can_rec into NECNT register. Before this configuration call
 * XMC_CAN_NODE_EnableConfigurationChange() API.
 *
 * \par<b>Related APIs:</b><BR>
 * XMC_CAN_NODE_GetReceiveErrorCounter()\n\n\n
 *
 * \par<b>Note:</b><br>
 *  NECNTx can be written only if bit NCRx.CCE is set.
 *
 */

__STATIC_INLINE void XMC_CAN_NODE_SetReceiveErrorCounter(XMC_CAN_NODE_t *const can_node, uint8_t can_rec)
{
 can_node->NECNT = ((can_node->NECNT) & ~(uint32_t)(CAN_NODE_NECNT_REC_Msk)) |
                   (((uint32_t)can_rec << CAN_NODE_NECNT_REC_Pos) & (uint32_t)CAN_NODE_NECNT_REC_Msk);
}


/**
 *
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 *
 * @return uint8_t Error Warning Level. Range :0 - 255
 *
 * \par<b>Description:</b><br>
 *	Returns error warning level. This determines the threshold value (warning level, default 96) to be reached in order
 *	to set the corresponding error warning bit EWRN. It reads NECNT register.
 *
 * \par<b>Related APIs:</b><BR>
 * XMC_CAN_NODE_SetErrorWarningLevel()\n\n\n
 *
 */


__STATIC_INLINE uint8_t XMC_CAN_NODE_GetErrorWarningLevel(XMC_CAN_NODE_t *const can_node)
{
 return (uint8_t)((uint32_t)((can_node->NECNT)  & CAN_NODE_NECNT_EWRNLVL_Msk) >> CAN_NODE_NECNT_EWRNLVL_Pos);
}


/**
 *
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 *
 * @return uint8_t transmit error counter value. Range :0 - 255
 *
 * \par<b>Description:</b><br>
 *	Returns Transmit Error Counter value. If the Bitstream Processor detects an error while a transmit operation is
 *	running, the Transmit Error Counter is incremented by 8. An increment of 1 is used when the error condition was
 *	reported by an external CAN node via an Error Frame generation. It reads NECNT register.
 *
 * \par<b>Related APIs:</b><BR>
 * XMC_CAN_NODE_SetTransmitErrorCounter()
 *
 * \par<b>Note:</b><br>
 *  NECNTx can be written only if bit NCRx.CCE is set.
 *
 */

__STATIC_INLINE uint8_t XMC_CAN_NODE_GetTransmitErrorCounter(XMC_CAN_NODE_t *const can_node)
{
  return (uint8_t)((uint32_t)((can_node->NECNT)  & CAN_NODE_NECNT_TEC_Msk) >> CAN_NODE_NECNT_TEC_Pos);
}


/**
 *
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 *
 * @return uint8_t	receive error counter value.
 *
 * \par<b>Description:</b><br>
 *	Returns Receive Error Counter value. It reads NECNT register.
 *
 * \par<b>Related APIs:</b><BR>
 * XMC_CAN_NODE_SetReceiveErrorCounter()
 *
 */

__STATIC_INLINE uint8_t XMC_CAN_NODE_GetReceiveErrorCounter(XMC_CAN_NODE_t *const can_node)
{
  return (uint8_t)((uint32_t)((can_node->NECNT)  & CAN_NODE_NECNT_REC_Msk) >> CAN_NODE_NECNT_REC_Pos);
}


/**
 *
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 *
 * @return uint32_t Current status of the node.
 *
 * \par<b>Description:</b><br>
 * Returns errors status as well as successfully transferred CAN frames status.
 *
 * \par<b>Related APIs:</b><BR>
 *  XMC_CAN_NODE_ClearStatus()
 *
 */

__STATIC_INLINE uint32_t XMC_CAN_NODE_GetStatus(XMC_CAN_NODE_t *const can_node)
{
  return ((can_node->NSR));
}

/**
 *
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 * @param can_node_status Status to clear.Refer @ref XMC_CAN_NODE_STATUS_t for valid values.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Clear errors status as well as successfully transferred CAN frames status.
 *
 * \par<b>Related APIs:</b><BR>
 * XMC_CAN_NODE_GetStatus()
 *
 */

__STATIC_INLINE void XMC_CAN_NODE_ClearStatus(XMC_CAN_NODE_t *const can_node,XMC_CAN_NODE_STATUS_t can_node_status)
{
   can_node->NSR &= ~(uint32_t)can_node_status;
}


/**
 *
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Allow to change the configuration of the CAN node, like bit timing, CAN bus transmit/receive ports and error
 * counters read. It configures NCRx.CCE bit.
 *
 * \par<b>Related APIs:</b><BR>
 * XMC_CAN_NODE_DisableConfigurationChange()
 *
 */

__STATIC_INLINE void XMC_CAN_NODE_EnableConfigurationChange(XMC_CAN_NODE_t *const can_node)
{
  can_node->NCR |= (uint32_t)CAN_NODE_NCR_CCE_Msk;
}


/**
 *
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *	Forbid to change the configuration of the CAN node. It configures NCRx.CCE bit.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_NODE_EnableConfigurationChange()
 *
 */

__STATIC_INLINE void XMC_CAN_NODE_DisableConfigurationChange(XMC_CAN_NODE_t *const can_node)
{
  can_node->NCR &= ~(uint32_t)CAN_NODE_NCR_CCE_Msk;
}



/**
 *
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Disable CAN node participation in CAN traffic. Bit INIT is automatically set when the CAN node enters the bus-off
 * state. It configures NCR.INIT bit.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_NODE_ResetInitBit()
 *
 */

__STATIC_INLINE void XMC_CAN_NODE_SetInitBit(XMC_CAN_NODE_t *const can_node)
{
  can_node->NCR |= (uint32_t)CAN_NODE_NCR_INIT_Msk;
}

/**
 *
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Enable CAN node participation in CAN traffic. Bit INIT is automatically set when the CAN node enters the bus-off
 * state. It configures NCR.INIT bit.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_NODE_SetInitBit()
 *
 */
__STATIC_INLINE void XMC_CAN_NODE_ResetInitBit(XMC_CAN_NODE_t *const can_node)
{
  can_node->NCR &= ~(uint32_t)CAN_NODE_NCR_INIT_Msk;
}

/**
 *
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Enable the CAN node, starts the participation in CAN traffic. It configures NCR.CANDIS and the NCR.INIT bits.
 *
 * \par<b>Related API's:</b><br>
 * None
 *
 */
__STATIC_INLINE void XMC_CAN_NODE_Enable(XMC_CAN_NODE_t *const can_node)
{
  can_node->NCR &= ~(uint32_t)CAN_NODE_NCR_CANDIS_Msk;
  XMC_CAN_NODE_ResetInitBit(can_node);
}

/**
 *
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Disable the CAN node, terminates participation in CAN traffic. It configures NCR.CANDIS bit.
 *
 * \par<b>Related API's:</b><br>
 * None
 *
 */
__STATIC_INLINE void XMC_CAN_NODE_Disable(XMC_CAN_NODE_t *const can_node)
{
  can_node->NCR |= (uint32_t)CAN_NODE_NCR_CANDIS_Msk;
}

/**
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Configure CAN node in Analyzer Mode. This means that messages may be received, but not transmitted. No acknowledge
 * is sent on the CAN bus upon frame reception. Active-error flags are sent recessive instead of dominant.
 * The transmit line is continuously held at recessive (1) level. XMC_CAN_NODE_SetInitBit() should be called before
 * set / reset AnalyzerMode. It configures NCR.CALM bit.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_NODE_ReSetAnalyzerMode()
 *
 */


__STATIC_INLINE void XMC_CAN_NODE_SetAnalyzerMode(XMC_CAN_NODE_t *const can_node)
{
  can_node->NCR |= (uint32_t)CAN_NODE_NCR_CALM_Msk;
}


/**
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Reset the Analyzer mode. CAN node is no more in Analyzer Mode. Please refer XMC_CAN_NODE_SetAnalyzerMode().
 * It configures NCR.CALM bit. XMC_CAN_NODE_SetInitBit() should be called before set / reset AnalyzerMode.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_NODE_SetAnalyzerMode()
 *
 */

__STATIC_INLINE void XMC_CAN_NODE_ReSetAnalyzerMode(XMC_CAN_NODE_t *const can_node)
{
  can_node->NCR &= ~(uint32_t)CAN_NODE_NCR_CALM_Msk;
}

#if !defined(MULTICAN_PLUS)
/**
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Trigger the suspension of the CAN node. An OCDS(on chip debug support) suspend trigger disables the CAN node: As
 * soon as the CAN node becomes bus-idle or bus-off, bit INIT is internally forced to 1 to disable the CAN node.
 * The actual value of bit INIT remains unchanged. It configures NCR.SUSEN bit
 *
 * \par<b>Related API's:</b><br>
 * None
 *
 *\par<b>Note:</b><br>
 * Bit SUSEN is reset via OCDS(on chip debug support) Reset.
 *
 */

__STATIC_INLINE void XMC_CAN_NODE_EnableSuspend(XMC_CAN_NODE_t *const can_node)
{
  can_node->NCR |= (uint32_t)CAN_NODE_NCR_SUSEN_Msk;
}
#else
/**
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Disables the transmission on CAN node x as soon as bus-idle is reached.
 *
 * \par<b>Related API's:</b><br>
 * None
 *
 * @note Only available for XMC1400,XMC4800 and XMC4700 series
 */

__STATIC_INLINE void XMC_CAN_NODE_DisableTransmit(XMC_CAN_NODE_t *const can_node)
{
  can_node->NCR |= (uint32_t)CAN_NODE_NCR_TXDIS_Msk;
}
#endif


/**
 *
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 * @param can_node_init	frame counter mode selection. Refer @ref XMC_CAN_NODE_FRAME_COUNTER_t for valid values.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Configures frame counter functions. Each CAN \a can_node is equipped with a frame counter that counts transmitted/received
 * CAN frames or obtains information about the time when a frame has been started to transmit or be received by the CAN
 * node. It configures NFCR register.
 *
 * \par<b>Related API's:</b><br>
 * None
 *
 */

__STATIC_INLINE void XMC_CAN_NODE_FrameCounterConfigure(XMC_CAN_NODE_t *const can_node,
                                        const XMC_CAN_NODE_FRAME_COUNTER_t *const can_node_init)
{
  can_node->NFCR = (can_node->NFCR & ~(uint32_t)(CAN_NODE_NFCR_CFMOD_Msk |
                                       CAN_NODE_NFCR_CFSEL_Msk)) |
                    can_node_init->nfcr;
}


/**
 *
 * @param can_node Pointer Pointing to CAN_NODE Structure. Defines CAN_NODE registers, Range :CAN_NODE0-CAN_NODE2.
 *
 * @return uint16_t	current value of the CAN frame counter. Range :0-65535
 *
 * \par<b>Description:</b><br>
 *  Returns the frame counter value \a can_node of the CAN node. In Frame Count Mode (CFMOD = 00B), this API returns the frame
 *  count value. In Time Stamp Mode (CFMOD = 01B), this API returns the captured bit time count value, captured with
 *  the start of a new frame. In all Bit Timing Analysis Modes (CFMOD = 10B), this API always returns the number of
 *  fCLC clock cycles (measurement result) minus 1.
 *
 * \par<b>Related API's:</b><br>
 * None
 *
 */

__STATIC_INLINE uint16_t XMC_CAN_NODE_GetCANFrameCounter(XMC_CAN_NODE_t *const can_node)
{
  return (uint16_t)(((uint32_t)(can_node->NFCR & CAN_NODE_NFCR_CFC_Msk) >> CAN_NODE_NFCR_CFC_Pos));
}

                                     /*MO APIs*/

/**
 *
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return XMC_CAN_STATUS_t	CAN Node status. Refer @ref XMC_CAN_STATUS_t structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Configures Data to be transmitted and data length code.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_MO_Config()\n\n\n
 *
 */


XMC_CAN_STATUS_t XMC_CAN_MO_UpdateData(const XMC_CAN_MO_t *const can_mo);

/**
 *
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return XMC_CAN_STATUS_t	CAN Node status. Refer @ref XMC_CAN_STATUS_t structure for details.
 *
 * \par<b>Description:</b><br>
 *  Configures transmit request for sending data frame. It configures MOCTR register. Data shall be updated
 *  using XMC_CAN_MO_UpdateData() before calling this API.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_MO_UpdateData()\n\n\n
 *
 */

XMC_CAN_STATUS_t XMC_CAN_MO_Transmit(const XMC_CAN_MO_t *const can_mo);


/**
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return XMC_CAN_STATUS_t	CAN Node status. Refer @ref XMC_CAN_STATUS_t structure for details.
 *
 * \par<b>Description:</b><br>
 *  Reads the Message Object data bytes, into message pointer passed as input parameter \a can_mo.
 *  can_data[0] of can_mo holds lower 4 bytes, can_data[1] of can_mo holds higher 4 bytes.
 *
 * \par<b>Related API's:</b><br>
 * None
 *
 */

XMC_CAN_STATUS_t XMC_CAN_MO_Receive(XMC_CAN_MO_t *can_mo);


/**
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return XMC_CAN_STATUS_t	CAN Node status. Refer @ref XMC_CAN_STATUS_t structure for details.
 *
 * \par<b>Description:</b><br>
 *  Reads the Message Object data bytes, into message pointer passed as input parameter \a can_mo.
 *  can_data[0] of can_mo holds lower 4 bytes, can_data[1] of can_mo holds higher 4 bytes.
 *
 * \par<b>Related API's:</b><br>
 * None
 *
 */
XMC_CAN_STATUS_t XMC_CAN_MO_ReceiveData (XMC_CAN_MO_t *can_mo);
/**
 * @param can_mo 		 	 Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 * @param can_mo_ptr_int 	 Message Object event node pointer selection. Refer @ref XMC_CAN_MO_POINTER_EVENT_t structure
 * 					 	    for valid values.
 * @param service_request	interrupt output line of multiCAN module.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Configures Message Object event node pointer with \a service_request number. It configures MOIPR register.
 *
 * \par<b>Related API's:</b><br>
 * None
 *
 */

__STATIC_INLINE void XMC_CAN_MO_SetEventNodePointer(const XMC_CAN_MO_t *const can_mo,
		                                            const XMC_CAN_MO_POINTER_EVENT_t can_mo_ptr_int,
		                                            const uint32_t service_request)
{
  can_mo->can_mo_ptr->MOIPR = ((can_mo->can_mo_ptr->MOIPR ) & ~(uint32_t)((uint32_t)CAN_MO_MOIPR_Msk << (uint32_t)can_mo_ptr_int)) |
		                      (service_request << (uint32_t)can_mo_ptr_int);
}

/**
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return uint32_t	Current Message Object status.
 *
 * \par<b>Description:</b><br>
 *  Returns Message Object status, that indicates message object transfer status and message object list status
 *  information such as the number of the current message object predecessor and successor message object, as well as
 *  the list number to which the message object is assigned.
 *
 * \par<b>Related API's:</b><br>
 * None
 *
 */

__STATIC_INLINE uint32_t XMC_CAN_MO_GetStatus(const XMC_CAN_MO_t *const can_mo)
{
  return ((can_mo->can_mo_ptr->MOSTAT));
}

/**
 *
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 * @param mask   Message Object set status selection. Refer @ref XMC_CAN_MO_SET_STATUS_t for details.
 * 				 Multiple enums can be ORed.
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Configures Message Object set Status. It configures MOCTR register.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_MO_ResetStatus()\n\n\n
 *
 */

__STATIC_INLINE void XMC_CAN_MO_SetStatus(const XMC_CAN_MO_t *const can_mo, const uint32_t mask)
{
  can_mo->can_mo_ptr->MOCTR = mask;
}

/**
 *
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 * @param mask   Message Object set status selection. Refer @ref XMC_CAN_MO_RESET_STATUS_t for details.
 * 						 Multiple enums can be ORed.
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Clears Message Object interrupt events. It configures MOCTR register.
 *
 * \par<b>Related API's:</b><br>
 * None
 *
 */

__STATIC_INLINE void XMC_CAN_MO_ResetStatus(const XMC_CAN_MO_t *const can_mo,const uint32_t mask)
{
  can_mo->can_mo_ptr->MOCTR = mask;
}



/**
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 * @param event	 CAN node Message Object event selection. Refer @ref XMC_CAN_MO_EVENT_t for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Enable CAN Message Object events. \a event can be ORed multiple Message Object events. It configures MOFCR register.
 *
 * \par<b>Related API's:</b><br>
 *  XMC_CAN_MO_DisableEvent()
 *
 */

__STATIC_INLINE void XMC_CAN_MO_EnableEvent(const XMC_CAN_MO_t *const can_mo,
		                                    const uint32_t event)
{
  can_mo->can_mo_ptr->MOFCR |= event;
}


/**
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 * @param event  CAN node Message Object event selection. Refer @ref XMC_CAN_MO_EVENT_t for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Disable CAN Message Object events. \a event can be ORed multiple Message Object events. It configures MOFCR register.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_MO_EnableEvent()
 *
 *
 */

__STATIC_INLINE void XMC_CAN_MO_DisableEvent(const XMC_CAN_MO_t *const can_mo,
		                                     const uint32_t event)
{
  can_mo->can_mo_ptr->MOFCR &= ~event;
}

/**
 *
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Enable the single transmit trial(STT). In STT,TXRQ is cleared on transmission start of message object n. Thus,
 *  no transmission retry is performed in case of transmission failure. It configures MOFCR.STT bit.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_MO_DisableSingleTransmitTrial()
 *
 */

__STATIC_INLINE void XMC_CAN_MO_EnableSingleTransmitTrial(const XMC_CAN_MO_t *const can_mo)
{
  can_mo->can_mo_ptr->MOFCR |= (uint32_t) CAN_MO_MOFCR_STT_Msk;
}


/**
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Disable the single transmit trial(STT). In STT,TXRQ is cleared on transmission start of message object n. Thus,
 *  no transmission retry is performed in case of transmission failure. It configures MOFCR.STT bit.
 *
 * \par<b>Related API's:</b><br>
 *  XMC_CAN_MO_EnableSingleTransmitTrial()
 *
 */

__STATIC_INLINE void XMC_CAN_MO_DisableSingleTransmitTrial(const XMC_CAN_MO_t *const can_mo)
{
  can_mo->can_mo_ptr->MOFCR &= ~(uint32_t)CAN_MO_MOFCR_STT_Msk;
}

/**
 *
 * @param can_mo            Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 * @param data_length_code	transfer data length. Range:0-8
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Configures CAN Message Object Data Length Code. It configures MOFCR register.
 *
 * \par<b>Related API's:</b><br>
 * None
 *
 */

__STATIC_INLINE void XMC_CAN_MO_DataLengthCode(const XMC_CAN_MO_t *const can_mo,const uint8_t data_length_code)
{
  can_mo->can_mo_ptr->MOFCR = ((can_mo->can_mo_ptr->MOFCR ) & ~(uint32_t)(CAN_MO_MOFCR_DLC_Msk)) |
                              (((uint32_t)data_length_code << CAN_MO_MOFCR_DLC_Pos) & (uint32_t)CAN_MO_MOFCR_DLC_Msk);
}

/**
 *
 * @param can_mo            Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 * @param data_length_code	transfer data length. Range:0-8
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Configures CAN Message Object Data Length Code. It configures MOFCR register.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_MO_GetDataLengthCode()
 *
 */

__STATIC_INLINE void XMC_CAN_MO_SetDataLengthCode(XMC_CAN_MO_t *const can_mo,const uint8_t data_length_code)
{
  can_mo->can_data_length = data_length_code;
  can_mo->can_mo_ptr->MOFCR = ((can_mo->can_mo_ptr->MOFCR ) & ~(uint32_t)(CAN_MO_MOFCR_DLC_Msk)) |
                              (((uint32_t)data_length_code << CAN_MO_MOFCR_DLC_Pos) & (uint32_t)CAN_MO_MOFCR_DLC_Msk);
}

/**
 *
 * @param can_mo           Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return Data length code
 *
 * \par<b>Description:</b><br>
 *   Gets the Data Length Code.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_MO_SetDataLengthCode()
 *
 */

__STATIC_INLINE uint8_t XMC_CAN_MO_GetDataLengthCode(const XMC_CAN_MO_t *const can_mo)
{
  return (((can_mo->can_mo_ptr->MOFCR) & (uint32_t)(CAN_MO_MOFCR_DLC_Msk)) >> CAN_MO_MOFCR_DLC_Pos);
}

/**
 *
 * @param can_mo            Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 * @param can_identifier	Identifier.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Configures CAN Message Object Identifier. It configures MOAR register.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_MO_GetIdentifier()
 *
 */

void XMC_CAN_MO_SetIdentifier(XMC_CAN_MO_t *const can_mo, const uint32_t can_identifier);

/**
 *
 * @param can_mo            Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return CAN MO identifier
 *
 * \par<b>Description:</b><br>
 *  Gets the Identifier of the MO
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_MO_SetIdentifier()
 *
 */

uint32_t XMC_CAN_MO_GetIdentifier(const XMC_CAN_MO_t *const can_mo);

/**
 *
 * @param can_mo            Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return Acceptance mask
 *
 * \par<b>Description:</b><br>
 *  Gets the acceptance mask for the CAN MO.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_MO_SetAcceptanceMask()
 *
 */

uint32_t XMC_CAN_MO_GetAcceptanceMask(const XMC_CAN_MO_t *const can_mo);

/**
 *
 * @param can_mo            Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 * @param can_id_mask	    CAN MO acceptance mask.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Sets the acceptance mask of the MO
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_MO_GetAcceptanceMask()
 *
 */

void XMC_CAN_MO_SetAcceptanceMask(XMC_CAN_MO_t *const can_mo,const uint32_t can_id_mask);

/**
 *
 * @param can_mo            Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Message object receives frames only with matching IDE bit.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_MO_AcceptStandardAndExtendedID()
 *
 */

__STATIC_INLINE void XMC_CAN_MO_AcceptOnlyMatchingIDE(XMC_CAN_MO_t *const can_mo)
{
  can_mo->can_ide_mask = 1U;
  can_mo->can_mo_ptr->MOAMR |=(uint32_t)(CAN_MO_MOAMR_MIDE_Msk);
}

/**
 *
 * @param can_mo            Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Message object accepts the reception of both, standard and extended frames.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_MO_AcceptOnlyMatchingIDE()
 *
 */

__STATIC_INLINE void XMC_CAN_MO_AcceptStandardAndExtendedID(XMC_CAN_MO_t *const can_mo)
{
  can_mo->can_ide_mask = 0U;
  can_mo->can_mo_ptr->MOAMR &= ~(uint32_t)(CAN_MO_MOAMR_MIDE_Msk);
}

/**
 *
 * @param can_mo            Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Message object handles standard frames with 11-bit identifier.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_MO_SetExtendedID()
 *
 * \par<b>Note:</b><br>
 * After setting the identifier type user has to set the identifier value by using @ref XMC_CAN_MO_SetIdentifier() API.
 */

__STATIC_INLINE void XMC_CAN_MO_SetStandardID(XMC_CAN_MO_t *const can_mo)
{
  can_mo->can_id_mode = (uint32_t)XMC_CAN_FRAME_TYPE_STANDARD_11BITS;
  can_mo->can_mo_ptr->MOAR &= ~(uint32_t)(CAN_MO_MOAR_IDE_Msk);
}

/**
 *
 * @param can_mo            Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Message object handles extended frames with 29-bit identifier.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_MO_SetStandardID()
 *
 * \par<b>Note:</b><br>
 * After setting the identifier type user has to set the identifier value by using @ref XMC_CAN_MO_SetIdentifier() API.
 *
 */
 
__STATIC_INLINE void XMC_CAN_MO_SetExtendedID(XMC_CAN_MO_t *const can_mo)
{
  can_mo->can_id_mode = (uint32_t)XMC_CAN_FRAME_TYPE_EXTENDED_29BITS;
  can_mo->can_mo_ptr->MOAR |= (uint32_t)CAN_MO_MOAR_IDE_Msk;
}

/**
 *
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Configuration allows to enable the FIFO Foreign Remote Request. This Specifies TXRQ of the message object referenced
 *  by the pointer CUR is set on reception of a matching Remote Frame. It configures MOFCR.FRREN register.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_FIFO_DisableForeingRemoteRequest()\n\n\n
 *
 */

__STATIC_INLINE void XMC_CAN_FIFO_EnableForeignRemoteRequest(const XMC_CAN_MO_t *const can_mo)
{
  can_mo->can_mo_ptr->MOFCR |= (uint32_t)CAN_MO_MOFCR_FRREN_Msk;
}

/**
 *
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Configuration allows to disable the FIFO Foreign Remote Request. TXRQ of message object n is set on reception
 * of a matching Remote Frame. It configures MOFCR.FRREN register.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_FIFO_EnableForeignRemoteRequest()\n\n\n
 *
 */

__STATIC_INLINE void XMC_CAN_FIFO_DisableForeingRemoteRequest(const XMC_CAN_MO_t *const can_mo)
{
  can_mo->can_mo_ptr->MOFCR &= ~(uint32_t)CAN_MO_MOFCR_FRREN_Msk;
}


/**
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Configuration allows to enable the FIFO Remote Monitoring. This Specifies identifier, IDE(Identifier Extension) bit,
 * and DLC of a matching Remote Frame are copied to transmit object n in order to monitor incoming Remote Frames.
 * It configures MOFCR.RMM bit.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_FIFO_DisableRemoteMonitoring()\n\n\n
 *
 * \par<b>Note:</b><br>
 *	Remote monitoring(RMM) applies only to transmit objects and has no effect on receive objects.
 *
 */
__STATIC_INLINE void XMC_CAN_FIFO_EnableRemoteMonitoring(const XMC_CAN_MO_t *const can_mo)
{
  can_mo->can_mo_ptr->MOFCR |= (uint32_t)CAN_MO_MOFCR_RMM_Msk;
}


/**
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Configuration allows to disable the FIFO Remote Monitoring. This Specifies Identifier, Identifier Extension bit,
 * and DLC of message object n remain unchanged upon the reception of a matching Remote Frame.
 * It configures MOFCR.RMM bit.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_FIFO_EnableRemoteMonitoring()\n\n\n
 *
 * \par<b>Note:</b><br>
 *	Remote monitoring(RMM) applies only to transmit objects and has no effect on receive objects.
 *
 */

__STATIC_INLINE void XMC_CAN_FIFO_DisableRemoteMonitoring(const XMC_CAN_MO_t *const can_mo)
{
  can_mo->can_mo_ptr->MOFCR &= ~(uint32_t)CAN_MO_MOFCR_RMM_Msk;
}


/**
 * @param can_mo 		 Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 * @param select_pointer Selected Message Object number. Range:0-63
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Set Object Select Pointer. If the current pointer CUR of FIFO base object becomes equal \a select_pointer,
 * a FIFO overflow interrupt request is generated. Used for FIFO monitoring purpose.
 *
 * \par<b>Related API's:</b><br>
 * None
 *
 */

__STATIC_INLINE void XMC_CAN_FIFO_SetSELMO(const XMC_CAN_MO_t *const can_mo,const uint8_t select_pointer)
{
  can_mo->can_mo_ptr->MOFGPR = ((can_mo->can_mo_ptr->MOFGPR ) & ~(uint32_t)(CAN_MO_MOFGPR_SEL_Msk)) |
                               (((uint32_t)select_pointer << CAN_MO_MOFGPR_SEL_Pos) & (uint32_t)CAN_MO_MOFGPR_SEL_Msk);
}


/**
 *
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return uint8_t	Current Message Object Number. Range:0-63
 *
 * \par<b>Description:</b><br>
 * Returns the current FIFO Message Object,points to the actual target object within a FIFO/Gateway structure.
 *
 * \par<b>Related API's:</b><br>
 * None
 *
 */

__STATIC_INLINE uint8_t XMC_CAN_FIFO_GetCurrentMO(const XMC_CAN_MO_t *const can_mo)
{
  return (uint8_t)((uint32_t)(can_mo->can_mo_ptr->MOFGPR & CAN_MO_MOFGPR_CUR_Msk) >> CAN_MO_MOFGPR_CUR_Pos);
}


/**
 *
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Configuration allows to enable the Single Data Transfer of the FIFO Message Object. If SDT = 1 and message object n
 * is not a FIFO base object, then MSGVAL is reset when this object has taken part in a successful data transfer
 * (receive or transmit). If SDT = 1 and message object n is a FIFO base object, then MSGVAL is reset when the pointer
 * to the current object CUR reaches the value of SEL in the FIFO/Gateway Pointer Register. It configures MOFCR.SDT bit.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_FIFO_DisableSingleDataTransfer()
 *
 */

__STATIC_INLINE void XMC_CAN_FIFO_EnableSingleDataTransfer(const XMC_CAN_MO_t *const can_mo)
{
  can_mo->can_mo_ptr->MOFCR |= (uint32_t)CAN_MO_MOFCR_SDT_Msk;
}


/**
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Configuration allows to disable the Single Data Transfer of the FIFO Message Object, with this configuration bit
 *  MSGVAL is not affected. It configures MOFCR.SDT bit.
 *
 * \par<b>Related API's:</b><br>
 * XMC_CAN_FIFO_EnableSingleDataTransfer()
 *
 */

__STATIC_INLINE void XMC_CAN_FIFO_DisableSingleDataTransfer(const XMC_CAN_MO_t *const can_mo)
{
  can_mo->can_mo_ptr->MOFCR &= ~(uint32_t)CAN_MO_MOFCR_SDT_Msk;
}


/**
 *
 * @param can_mo   Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 * @param can_fifo CAN FIFO configuration data structure. Refer @ref XMC_CAN_FIFO_CONFIG_t data structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Configures the transmit FIFO. A FIFO consists of one base object and n slave objects. Please refer
 *  reference manual \b Transmit FIFO for more info.
 *
 * \par<b>Related API's:</b><br>
 * None.
 *
 */

void XMC_CAN_TXFIFO_ConfigMOBaseObject(const XMC_CAN_MO_t *const can_mo,const XMC_CAN_FIFO_CONFIG_t can_fifo);


/**
 *
 * @param can_mo   Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 * @param can_fifo CAN FIFO configuration data structure. Refer @ref XMC_CAN_FIFO_CONFIG_t data structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Configures the base object of receive FIFO.
 *
 * \par<b>Related API's:</b><br>
 *  None
 */

void XMC_CAN_RXFIFO_ConfigMOBaseObject(const XMC_CAN_MO_t *const can_mo,const XMC_CAN_FIFO_CONFIG_t can_fifo);


/**
 *
 * @param can_mo 	Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 * @param can_fifo	CAN FIFO configuration data structure. Refer @ref XMC_CAN_FIFO_CONFIG_t data structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 * Configures the slave object of transmit FIFO.
 *
 * \par<b>Related API's:</b><br>
 * None
 *
 */
void XMC_CAN_TXFIFO_ConfigMOSlaveObject(const XMC_CAN_MO_t *const can_mo,const XMC_CAN_FIFO_CONFIG_t can_fifo);


/**
 *
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Configures the slave Object of receive FIFO. It configures MOCTR.RESRXEN bit.
 *
 * \par<b>Related API's:</b><br>
 * None
 *
 */

__STATIC_INLINE void XMC_CAN_RXFIFO_ConfigMOSlaveObject(const XMC_CAN_MO_t *const can_mo)
{
  can_mo->can_mo_ptr->MOCTR = (uint32_t)CAN_MO_MOCTR_RESRXEN_Msk;
}


/**
 *
 * @param can_mo 	  Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 * @param can_gateway CAN  gateway configuration data structure. Refer XMC_CAN_GATEWAY_CONFIG_t data structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Configures the Gateway source object. The Gateway Mode \a can_gateway makes it possible to establish an automatic
 *  information transfer between two independent CAN buses without CPU interaction. Please refer reference manual
 *  \b GatewayMode for more info.
 *
 * \par<b>Related API's:</b><br>
 * None
 *
 */

void XMC_CAN_GATEWAY_InitSourceObject(const XMC_CAN_MO_t *const can_mo,const XMC_CAN_GATEWAY_CONFIG_t can_gateway);


/**
 *
 * @param can_mo 	  Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return None
 *
 * \par<b>Description:</b><br>
 *  Configures the Gateway destination object. The Gateway Mode \a can_gateway makes it possible to establish an automatic
 *  information transfer between two independent CAN buses without CPU interaction. Please refer reference manual
 *  \b GatewayMode for more info.
 *
 * \par<b>Related API's:</b><br>
 * None
 *
 */

__STATIC_INLINE void XMC_CAN_GATEWAY_InitDesObject(const XMC_CAN_MO_t *const can_mo)
{
  can_mo->can_mo_ptr->MOCTR  = CAN_MO_MOCTR_RESRXEN_Msk |
		                       CAN_MO_MOCTR_RESNEWDAT_Msk;
}

/**
 *
 * @param can_mo Pointer to Message Object structure. Refer @ref XMC_CAN_MO_t data structure for details.
 *
 * @return XMC_CAN_STATUS_t CAN Node status. Refer @ref XMC_CAN_STATUS_t structure for details.
 *
 * \par<b>Description:</b><br>
 *  To transmit Message Object from the FIFO. Prior to this CAN node Message Object FIFO structure shall be made using
 *  XMC_CAN_TXFIFO_ConfigMOBaseObject(), XMC_CAN_TXFIFO_ConfigMOSlaveObject(),XMC_CAN_RXFIFO_ConfigMOBaseObject() API's.
 *  Please refer reference manual \b MessageObject \b FIFOStructure for more info.
 *
 *
 */
XMC_CAN_STATUS_t XMC_CAN_TXFIFO_Transmit(const XMC_CAN_MO_t *const can_mo);

#ifdef __cplusplus
}
#endif

/**
  * @}
  */

/**
  * @}
  */

#endif /* defined(CAN) */

#endif /* XMC_CAN_H */