openblt/Target/Demo/ARMCM3_STM32F1_Olimex_STM32.../Boot/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c

128 lines
4.1 KiB
C

/**
******************************************************************************
* @file stm32f1xx_hal_gpio_ex.c
* @author MCD Application Team
* @brief GPIO Extension HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the General Purpose Input/Output (GPIO) extension peripheral.
* + Extended features functions
*
@verbatim
==============================================================================
##### GPIO Peripheral extension features #####
==============================================================================
[..] GPIO module on STM32F1 family, manage also the AFIO register:
(+) Possibility to use the EVENTOUT Cortex feature
##### How to use this driver #####
==============================================================================
[..] This driver provides functions to use EVENTOUT Cortex feature
(#) Configure EVENTOUT Cortex feature using the function HAL_GPIOEx_ConfigEventout()
(#) Activate EVENTOUT Cortex feature using the HAL_GPIOEx_EnableEventout()
(#) Deactivate EVENTOUT Cortex feature using the HAL_GPIOEx_DisableEventout()
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @defgroup GPIOEx GPIOEx
* @brief GPIO HAL module driver
* @{
*/
#ifdef HAL_GPIO_MODULE_ENABLED
/** @defgroup GPIOEx_Exported_Functions GPIOEx Exported Functions
* @{
*/
/** @defgroup GPIOEx_Exported_Functions_Group1 Extended features functions
* @brief Extended features functions
*
@verbatim
==============================================================================
##### Extended features functions #####
==============================================================================
[..] This section provides functions allowing to:
(+) Configure EVENTOUT Cortex feature using the function HAL_GPIOEx_ConfigEventout()
(+) Activate EVENTOUT Cortex feature using the HAL_GPIOEx_EnableEventout()
(+) Deactivate EVENTOUT Cortex feature using the HAL_GPIOEx_DisableEventout()
@endverbatim
* @{
*/
/**
* @brief Configures the port and pin on which the EVENTOUT Cortex signal will be connected.
* @param GPIO_PortSource Select the port used to output the Cortex EVENTOUT signal.
* This parameter can be a value of @ref GPIOEx_EVENTOUT_PORT.
* @param GPIO_PinSource Select the pin used to output the Cortex EVENTOUT signal.
* This parameter can be a value of @ref GPIOEx_EVENTOUT_PIN.
* @retval None
*/
void HAL_GPIOEx_ConfigEventout(uint32_t GPIO_PortSource, uint32_t GPIO_PinSource)
{
/* Verify the parameters */
assert_param(IS_AFIO_EVENTOUT_PORT(GPIO_PortSource));
assert_param(IS_AFIO_EVENTOUT_PIN(GPIO_PinSource));
/* Apply the new configuration */
MODIFY_REG(AFIO->EVCR, (AFIO_EVCR_PORT) | (AFIO_EVCR_PIN), (GPIO_PortSource) | (GPIO_PinSource));
}
/**
* @brief Enables the Event Output.
* @retval None
*/
void HAL_GPIOEx_EnableEventout(void)
{
SET_BIT(AFIO->EVCR, AFIO_EVCR_EVOE);
}
/**
* @brief Disables the Event Output.
* @retval None
*/
void HAL_GPIOEx_DisableEventout(void)
{
CLEAR_BIT(AFIO->EVCR, AFIO_EVCR_EVOE);
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_GPIO_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/