4621 lines
226 KiB
C
4621 lines
226 KiB
C
//*****************************************************************************
|
|
//
|
|
// hw_usb.h - Macros for use in accessing the USB registers.
|
|
//
|
|
// Copyright (c) 2007-2011 Texas Instruments Incorporated. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Texas Instruments (TI) is supplying this software for use solely and
|
|
// exclusively on TI's microcontroller products. The software is owned by
|
|
// TI and/or its suppliers, and is protected under applicable copyright
|
|
// laws. You may not combine this software with "viral" open-source
|
|
// software in order to form a larger program.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
|
|
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
|
|
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
|
|
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
|
|
// DAMAGES, FOR ANY REASON WHATSOEVER.
|
|
//
|
|
// This is part of revision 6852 of the Stellaris Firmware Development Package.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#ifndef __HW_USB_H__
|
|
#define __HW_USB_H__
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the Univeral Serial Bus register offsets.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_O_FADDR 0x00000000 // USB Device Functional Address
|
|
#define USB_O_POWER 0x00000001 // USB Power
|
|
#define USB_O_TXIS 0x00000002 // USB Transmit Interrupt Status
|
|
#define USB_O_RXIS 0x00000004 // USB Receive Interrupt Status
|
|
#define USB_O_TXIE 0x00000006 // USB Transmit Interrupt Enable
|
|
#define USB_O_RXIE 0x00000008 // USB Receive Interrupt Enable
|
|
#define USB_O_IS 0x0000000A // USB General Interrupt Status
|
|
#define USB_O_IE 0x0000000B // USB Interrupt Enable
|
|
#define USB_O_FRAME 0x0000000C // USB Frame Value
|
|
#define USB_O_EPIDX 0x0000000E // USB Endpoint Index
|
|
#define USB_O_TEST 0x0000000F // USB Test Mode
|
|
#define USB_O_FIFO0 0x00000020 // USB FIFO Endpoint 0
|
|
#define USB_O_FIFO1 0x00000024 // USB FIFO Endpoint 1
|
|
#define USB_O_FIFO2 0x00000028 // USB FIFO Endpoint 2
|
|
#define USB_O_FIFO3 0x0000002C // USB FIFO Endpoint 3
|
|
#define USB_O_FIFO4 0x00000030 // USB FIFO Endpoint 4
|
|
#define USB_O_FIFO5 0x00000034 // USB FIFO Endpoint 5
|
|
#define USB_O_FIFO6 0x00000038 // USB FIFO Endpoint 6
|
|
#define USB_O_FIFO7 0x0000003C // USB FIFO Endpoint 7
|
|
#define USB_O_FIFO8 0x00000040 // USB FIFO Endpoint 8
|
|
#define USB_O_FIFO9 0x00000044 // USB FIFO Endpoint 9
|
|
#define USB_O_FIFO10 0x00000048 // USB FIFO Endpoint 10
|
|
#define USB_O_FIFO11 0x0000004C // USB FIFO Endpoint 11
|
|
#define USB_O_FIFO12 0x00000050 // USB FIFO Endpoint 12
|
|
#define USB_O_FIFO13 0x00000054 // USB FIFO Endpoint 13
|
|
#define USB_O_FIFO14 0x00000058 // USB FIFO Endpoint 14
|
|
#define USB_O_FIFO15 0x0000005C // USB FIFO Endpoint 15
|
|
#define USB_O_DEVCTL 0x00000060 // USB Device Control
|
|
#define USB_O_TXFIFOSZ 0x00000062 // USB Transmit Dynamic FIFO Sizing
|
|
#define USB_O_RXFIFOSZ 0x00000063 // USB Receive Dynamic FIFO Sizing
|
|
#define USB_O_TXFIFOADD 0x00000064 // USB Transmit FIFO Start Address
|
|
#define USB_O_RXFIFOADD 0x00000066 // USB Receive FIFO Start Address
|
|
#define USB_O_CONTIM 0x0000007A // USB Connect Timing
|
|
#define USB_O_VPLEN 0x0000007B // USB OTG VBUS Pulse Timing
|
|
#define USB_O_FSEOF 0x0000007D // USB Full-Speed Last Transaction
|
|
// to End of Frame Timing
|
|
#define USB_O_LSEOF 0x0000007E // USB Low-Speed Last Transaction
|
|
// to End of Frame Timing
|
|
#define USB_O_TXFUNCADDR0 0x00000080 // USB Transmit Functional Address
|
|
// Endpoint 0
|
|
#define USB_O_TXHUBADDR0 0x00000082 // USB Transmit Hub Address
|
|
// Endpoint 0
|
|
#define USB_O_TXHUBPORT0 0x00000083 // USB Transmit Hub Port Endpoint 0
|
|
#define USB_O_TXFUNCADDR1 0x00000088 // USB Transmit Functional Address
|
|
// Endpoint 1
|
|
#define USB_O_TXHUBADDR1 0x0000008A // USB Transmit Hub Address
|
|
// Endpoint 1
|
|
#define USB_O_TXHUBPORT1 0x0000008B // USB Transmit Hub Port Endpoint 1
|
|
#define USB_O_RXFUNCADDR1 0x0000008C // USB Receive Functional Address
|
|
// Endpoint 1
|
|
#define USB_O_RXHUBADDR1 0x0000008E // USB Receive Hub Address Endpoint
|
|
// 1
|
|
#define USB_O_RXHUBPORT1 0x0000008F // USB Receive Hub Port Endpoint 1
|
|
#define USB_O_TXFUNCADDR2 0x00000090 // USB Transmit Functional Address
|
|
// Endpoint 2
|
|
#define USB_O_TXHUBADDR2 0x00000092 // USB Transmit Hub Address
|
|
// Endpoint 2
|
|
#define USB_O_TXHUBPORT2 0x00000093 // USB Transmit Hub Port Endpoint 2
|
|
#define USB_O_RXFUNCADDR2 0x00000094 // USB Receive Functional Address
|
|
// Endpoint 2
|
|
#define USB_O_RXHUBADDR2 0x00000096 // USB Receive Hub Address Endpoint
|
|
// 2
|
|
#define USB_O_RXHUBPORT2 0x00000097 // USB Receive Hub Port Endpoint 2
|
|
#define USB_O_TXFUNCADDR3 0x00000098 // USB Transmit Functional Address
|
|
// Endpoint 3
|
|
#define USB_O_TXHUBADDR3 0x0000009A // USB Transmit Hub Address
|
|
// Endpoint 3
|
|
#define USB_O_TXHUBPORT3 0x0000009B // USB Transmit Hub Port Endpoint 3
|
|
#define USB_O_RXFUNCADDR3 0x0000009C // USB Receive Functional Address
|
|
// Endpoint 3
|
|
#define USB_O_RXHUBADDR3 0x0000009E // USB Receive Hub Address Endpoint
|
|
// 3
|
|
#define USB_O_RXHUBPORT3 0x0000009F // USB Receive Hub Port Endpoint 3
|
|
#define USB_O_TXFUNCADDR4 0x000000A0 // USB Transmit Functional Address
|
|
// Endpoint 4
|
|
#define USB_O_TXHUBADDR4 0x000000A2 // USB Transmit Hub Address
|
|
// Endpoint 4
|
|
#define USB_O_TXHUBPORT4 0x000000A3 // USB Transmit Hub Port Endpoint 4
|
|
#define USB_O_RXFUNCADDR4 0x000000A4 // USB Receive Functional Address
|
|
// Endpoint 4
|
|
#define USB_O_RXHUBADDR4 0x000000A6 // USB Receive Hub Address Endpoint
|
|
// 4
|
|
#define USB_O_RXHUBPORT4 0x000000A7 // USB Receive Hub Port Endpoint 4
|
|
#define USB_O_TXFUNCADDR5 0x000000A8 // USB Transmit Functional Address
|
|
// Endpoint 5
|
|
#define USB_O_TXHUBADDR5 0x000000AA // USB Transmit Hub Address
|
|
// Endpoint 5
|
|
#define USB_O_TXHUBPORT5 0x000000AB // USB Transmit Hub Port Endpoint 5
|
|
#define USB_O_RXFUNCADDR5 0x000000AC // USB Receive Functional Address
|
|
// Endpoint 5
|
|
#define USB_O_RXHUBADDR5 0x000000AE // USB Receive Hub Address Endpoint
|
|
// 5
|
|
#define USB_O_RXHUBPORT5 0x000000AF // USB Receive Hub Port Endpoint 5
|
|
#define USB_O_TXFUNCADDR6 0x000000B0 // USB Transmit Functional Address
|
|
// Endpoint 6
|
|
#define USB_O_TXHUBADDR6 0x000000B2 // USB Transmit Hub Address
|
|
// Endpoint 6
|
|
#define USB_O_TXHUBPORT6 0x000000B3 // USB Transmit Hub Port Endpoint 6
|
|
#define USB_O_RXFUNCADDR6 0x000000B4 // USB Receive Functional Address
|
|
// Endpoint 6
|
|
#define USB_O_RXHUBADDR6 0x000000B6 // USB Receive Hub Address Endpoint
|
|
// 6
|
|
#define USB_O_RXHUBPORT6 0x000000B7 // USB Receive Hub Port Endpoint 6
|
|
#define USB_O_TXFUNCADDR7 0x000000B8 // USB Transmit Functional Address
|
|
// Endpoint 7
|
|
#define USB_O_TXHUBADDR7 0x000000BA // USB Transmit Hub Address
|
|
// Endpoint 7
|
|
#define USB_O_TXHUBPORT7 0x000000BB // USB Transmit Hub Port Endpoint 7
|
|
#define USB_O_RXFUNCADDR7 0x000000BC // USB Receive Functional Address
|
|
// Endpoint 7
|
|
#define USB_O_RXHUBADDR7 0x000000BE // USB Receive Hub Address Endpoint
|
|
// 7
|
|
#define USB_O_RXHUBPORT7 0x000000BF // USB Receive Hub Port Endpoint 7
|
|
#define USB_O_TXFUNCADDR8 0x000000C0 // USB Transmit Functional Address
|
|
// Endpoint 8
|
|
#define USB_O_TXHUBADDR8 0x000000C2 // USB Transmit Hub Address
|
|
// Endpoint 8
|
|
#define USB_O_TXHUBPORT8 0x000000C3 // USB Transmit Hub Port Endpoint 8
|
|
#define USB_O_RXFUNCADDR8 0x000000C4 // USB Receive Functional Address
|
|
// Endpoint 8
|
|
#define USB_O_RXHUBADDR8 0x000000C6 // USB Receive Hub Address Endpoint
|
|
// 8
|
|
#define USB_O_RXHUBPORT8 0x000000C7 // USB Receive Hub Port Endpoint 8
|
|
#define USB_O_TXFUNCADDR9 0x000000C8 // USB Transmit Functional Address
|
|
// Endpoint 9
|
|
#define USB_O_TXHUBADDR9 0x000000CA // USB Transmit Hub Address
|
|
// Endpoint 9
|
|
#define USB_O_TXHUBPORT9 0x000000CB // USB Transmit Hub Port Endpoint 9
|
|
#define USB_O_RXFUNCADDR9 0x000000CC // USB Receive Functional Address
|
|
// Endpoint 9
|
|
#define USB_O_RXHUBADDR9 0x000000CE // USB Receive Hub Address Endpoint
|
|
// 9
|
|
#define USB_O_RXHUBPORT9 0x000000CF // USB Receive Hub Port Endpoint 9
|
|
#define USB_O_TXFUNCADDR10 0x000000D0 // USB Transmit Functional Address
|
|
// Endpoint 10
|
|
#define USB_O_TXHUBADDR10 0x000000D2 // USB Transmit Hub Address
|
|
// Endpoint 10
|
|
#define USB_O_TXHUBPORT10 0x000000D3 // USB Transmit Hub Port Endpoint
|
|
// 10
|
|
#define USB_O_RXFUNCADDR10 0x000000D4 // USB Receive Functional Address
|
|
// Endpoint 10
|
|
#define USB_O_RXHUBADDR10 0x000000D6 // USB Receive Hub Address Endpoint
|
|
// 10
|
|
#define USB_O_RXHUBPORT10 0x000000D7 // USB Receive Hub Port Endpoint 10
|
|
#define USB_O_TXFUNCADDR11 0x000000D8 // USB Transmit Functional Address
|
|
// Endpoint 11
|
|
#define USB_O_TXHUBADDR11 0x000000DA // USB Transmit Hub Address
|
|
// Endpoint 11
|
|
#define USB_O_TXHUBPORT11 0x000000DB // USB Transmit Hub Port Endpoint
|
|
// 11
|
|
#define USB_O_RXFUNCADDR11 0x000000DC // USB Receive Functional Address
|
|
// Endpoint 11
|
|
#define USB_O_RXHUBADDR11 0x000000DE // USB Receive Hub Address Endpoint
|
|
// 11
|
|
#define USB_O_RXHUBPORT11 0x000000DF // USB Receive Hub Port Endpoint 11
|
|
#define USB_O_TXFUNCADDR12 0x000000E0 // USB Transmit Functional Address
|
|
// Endpoint 12
|
|
#define USB_O_TXHUBADDR12 0x000000E2 // USB Transmit Hub Address
|
|
// Endpoint 12
|
|
#define USB_O_TXHUBPORT12 0x000000E3 // USB Transmit Hub Port Endpoint
|
|
// 12
|
|
#define USB_O_RXFUNCADDR12 0x000000E4 // USB Receive Functional Address
|
|
// Endpoint 12
|
|
#define USB_O_RXHUBADDR12 0x000000E6 // USB Receive Hub Address Endpoint
|
|
// 12
|
|
#define USB_O_RXHUBPORT12 0x000000E7 // USB Receive Hub Port Endpoint 12
|
|
#define USB_O_TXFUNCADDR13 0x000000E8 // USB Transmit Functional Address
|
|
// Endpoint 13
|
|
#define USB_O_TXHUBADDR13 0x000000EA // USB Transmit Hub Address
|
|
// Endpoint 13
|
|
#define USB_O_TXHUBPORT13 0x000000EB // USB Transmit Hub Port Endpoint
|
|
// 13
|
|
#define USB_O_RXFUNCADDR13 0x000000EC // USB Receive Functional Address
|
|
// Endpoint 13
|
|
#define USB_O_RXHUBADDR13 0x000000EE // USB Receive Hub Address Endpoint
|
|
// 13
|
|
#define USB_O_RXHUBPORT13 0x000000EF // USB Receive Hub Port Endpoint 13
|
|
#define USB_O_TXFUNCADDR14 0x000000F0 // USB Transmit Functional Address
|
|
// Endpoint 14
|
|
#define USB_O_TXHUBADDR14 0x000000F2 // USB Transmit Hub Address
|
|
// Endpoint 14
|
|
#define USB_O_TXHUBPORT14 0x000000F3 // USB Transmit Hub Port Endpoint
|
|
// 14
|
|
#define USB_O_RXFUNCADDR14 0x000000F4 // USB Receive Functional Address
|
|
// Endpoint 14
|
|
#define USB_O_RXHUBADDR14 0x000000F6 // USB Receive Hub Address Endpoint
|
|
// 14
|
|
#define USB_O_RXHUBPORT14 0x000000F7 // USB Receive Hub Port Endpoint 14
|
|
#define USB_O_TXFUNCADDR15 0x000000F8 // USB Transmit Functional Address
|
|
// Endpoint 15
|
|
#define USB_O_TXHUBADDR15 0x000000FA // USB Transmit Hub Address
|
|
// Endpoint 15
|
|
#define USB_O_TXHUBPORT15 0x000000FB // USB Transmit Hub Port Endpoint
|
|
// 15
|
|
#define USB_O_RXFUNCADDR15 0x000000FC // USB Receive Functional Address
|
|
// Endpoint 15
|
|
#define USB_O_RXHUBADDR15 0x000000FE // USB Receive Hub Address Endpoint
|
|
// 15
|
|
#define USB_O_RXHUBPORT15 0x000000FF // USB Receive Hub Port Endpoint 15
|
|
#define USB_O_CSRL0 0x00000102 // USB Control and Status Endpoint
|
|
// 0 Low
|
|
#define USB_O_CSRH0 0x00000103 // USB Control and Status Endpoint
|
|
// 0 High
|
|
#define USB_O_COUNT0 0x00000108 // USB Receive Byte Count Endpoint
|
|
// 0
|
|
#define USB_O_TYPE0 0x0000010A // USB Type Endpoint 0
|
|
#define USB_O_NAKLMT 0x0000010B // USB NAK Limit
|
|
#define USB_O_TXMAXP1 0x00000110 // USB Maximum Transmit Data
|
|
// Endpoint 1
|
|
#define USB_O_TXCSRL1 0x00000112 // USB Transmit Control and Status
|
|
// Endpoint 1 Low
|
|
#define USB_O_TXCSRH1 0x00000113 // USB Transmit Control and Status
|
|
// Endpoint 1 High
|
|
#define USB_O_RXMAXP1 0x00000114 // USB Maximum Receive Data
|
|
// Endpoint 1
|
|
#define USB_O_RXCSRL1 0x00000116 // USB Receive Control and Status
|
|
// Endpoint 1 Low
|
|
#define USB_O_RXCSRH1 0x00000117 // USB Receive Control and Status
|
|
// Endpoint 1 High
|
|
#define USB_O_RXCOUNT1 0x00000118 // USB Receive Byte Count Endpoint
|
|
// 1
|
|
#define USB_O_TXTYPE1 0x0000011A // USB Host Transmit Configure Type
|
|
// Endpoint 1
|
|
#define USB_O_TXINTERVAL1 0x0000011B // USB Host Transmit Interval
|
|
// Endpoint 1
|
|
#define USB_O_RXTYPE1 0x0000011C // USB Host Configure Receive Type
|
|
// Endpoint 1
|
|
#define USB_O_RXINTERVAL1 0x0000011D // USB Host Receive Polling
|
|
// Interval Endpoint 1
|
|
#define USB_O_TXMAXP2 0x00000120 // USB Maximum Transmit Data
|
|
// Endpoint 2
|
|
#define USB_O_TXCSRL2 0x00000122 // USB Transmit Control and Status
|
|
// Endpoint 2 Low
|
|
#define USB_O_TXCSRH2 0x00000123 // USB Transmit Control and Status
|
|
// Endpoint 2 High
|
|
#define USB_O_RXMAXP2 0x00000124 // USB Maximum Receive Data
|
|
// Endpoint 2
|
|
#define USB_O_RXCSRL2 0x00000126 // USB Receive Control and Status
|
|
// Endpoint 2 Low
|
|
#define USB_O_RXCSRH2 0x00000127 // USB Receive Control and Status
|
|
// Endpoint 2 High
|
|
#define USB_O_RXCOUNT2 0x00000128 // USB Receive Byte Count Endpoint
|
|
// 2
|
|
#define USB_O_TXTYPE2 0x0000012A // USB Host Transmit Configure Type
|
|
// Endpoint 2
|
|
#define USB_O_TXINTERVAL2 0x0000012B // USB Host Transmit Interval
|
|
// Endpoint 2
|
|
#define USB_O_RXTYPE2 0x0000012C // USB Host Configure Receive Type
|
|
// Endpoint 2
|
|
#define USB_O_RXINTERVAL2 0x0000012D // USB Host Receive Polling
|
|
// Interval Endpoint 2
|
|
#define USB_O_TXMAXP3 0x00000130 // USB Maximum Transmit Data
|
|
// Endpoint 3
|
|
#define USB_O_TXCSRL3 0x00000132 // USB Transmit Control and Status
|
|
// Endpoint 3 Low
|
|
#define USB_O_TXCSRH3 0x00000133 // USB Transmit Control and Status
|
|
// Endpoint 3 High
|
|
#define USB_O_RXMAXP3 0x00000134 // USB Maximum Receive Data
|
|
// Endpoint 3
|
|
#define USB_O_RXCSRL3 0x00000136 // USB Receive Control and Status
|
|
// Endpoint 3 Low
|
|
#define USB_O_RXCSRH3 0x00000137 // USB Receive Control and Status
|
|
// Endpoint 3 High
|
|
#define USB_O_RXCOUNT3 0x00000138 // USB Receive Byte Count Endpoint
|
|
// 3
|
|
#define USB_O_TXTYPE3 0x0000013A // USB Host Transmit Configure Type
|
|
// Endpoint 3
|
|
#define USB_O_TXINTERVAL3 0x0000013B // USB Host Transmit Interval
|
|
// Endpoint 3
|
|
#define USB_O_RXTYPE3 0x0000013C // USB Host Configure Receive Type
|
|
// Endpoint 3
|
|
#define USB_O_RXINTERVAL3 0x0000013D // USB Host Receive Polling
|
|
// Interval Endpoint 3
|
|
#define USB_O_TXMAXP4 0x00000140 // USB Maximum Transmit Data
|
|
// Endpoint 4
|
|
#define USB_O_TXCSRL4 0x00000142 // USB Transmit Control and Status
|
|
// Endpoint 4 Low
|
|
#define USB_O_TXCSRH4 0x00000143 // USB Transmit Control and Status
|
|
// Endpoint 4 High
|
|
#define USB_O_RXMAXP4 0x00000144 // USB Maximum Receive Data
|
|
// Endpoint 4
|
|
#define USB_O_RXCSRL4 0x00000146 // USB Receive Control and Status
|
|
// Endpoint 4 Low
|
|
#define USB_O_RXCSRH4 0x00000147 // USB Receive Control and Status
|
|
// Endpoint 4 High
|
|
#define USB_O_RXCOUNT4 0x00000148 // USB Receive Byte Count Endpoint
|
|
// 4
|
|
#define USB_O_TXTYPE4 0x0000014A // USB Host Transmit Configure Type
|
|
// Endpoint 4
|
|
#define USB_O_TXINTERVAL4 0x0000014B // USB Host Transmit Interval
|
|
// Endpoint 4
|
|
#define USB_O_RXTYPE4 0x0000014C // USB Host Configure Receive Type
|
|
// Endpoint 4
|
|
#define USB_O_RXINTERVAL4 0x0000014D // USB Host Receive Polling
|
|
// Interval Endpoint 4
|
|
#define USB_O_TXMAXP5 0x00000150 // USB Maximum Transmit Data
|
|
// Endpoint 5
|
|
#define USB_O_TXCSRL5 0x00000152 // USB Transmit Control and Status
|
|
// Endpoint 5 Low
|
|
#define USB_O_TXCSRH5 0x00000153 // USB Transmit Control and Status
|
|
// Endpoint 5 High
|
|
#define USB_O_RXMAXP5 0x00000154 // USB Maximum Receive Data
|
|
// Endpoint 5
|
|
#define USB_O_RXCSRL5 0x00000156 // USB Receive Control and Status
|
|
// Endpoint 5 Low
|
|
#define USB_O_RXCSRH5 0x00000157 // USB Receive Control and Status
|
|
// Endpoint 5 High
|
|
#define USB_O_RXCOUNT5 0x00000158 // USB Receive Byte Count Endpoint
|
|
// 5
|
|
#define USB_O_TXTYPE5 0x0000015A // USB Host Transmit Configure Type
|
|
// Endpoint 5
|
|
#define USB_O_TXINTERVAL5 0x0000015B // USB Host Transmit Interval
|
|
// Endpoint 5
|
|
#define USB_O_RXTYPE5 0x0000015C // USB Host Configure Receive Type
|
|
// Endpoint 5
|
|
#define USB_O_RXINTERVAL5 0x0000015D // USB Host Receive Polling
|
|
// Interval Endpoint 5
|
|
#define USB_O_TXMAXP6 0x00000160 // USB Maximum Transmit Data
|
|
// Endpoint 6
|
|
#define USB_O_TXCSRL6 0x00000162 // USB Transmit Control and Status
|
|
// Endpoint 6 Low
|
|
#define USB_O_TXCSRH6 0x00000163 // USB Transmit Control and Status
|
|
// Endpoint 6 High
|
|
#define USB_O_RXMAXP6 0x00000164 // USB Maximum Receive Data
|
|
// Endpoint 6
|
|
#define USB_O_RXCSRL6 0x00000166 // USB Receive Control and Status
|
|
// Endpoint 6 Low
|
|
#define USB_O_RXCSRH6 0x00000167 // USB Receive Control and Status
|
|
// Endpoint 6 High
|
|
#define USB_O_RXCOUNT6 0x00000168 // USB Receive Byte Count Endpoint
|
|
// 6
|
|
#define USB_O_TXTYPE6 0x0000016A // USB Host Transmit Configure Type
|
|
// Endpoint 6
|
|
#define USB_O_TXINTERVAL6 0x0000016B // USB Host Transmit Interval
|
|
// Endpoint 6
|
|
#define USB_O_RXTYPE6 0x0000016C // USB Host Configure Receive Type
|
|
// Endpoint 6
|
|
#define USB_O_RXINTERVAL6 0x0000016D // USB Host Receive Polling
|
|
// Interval Endpoint 6
|
|
#define USB_O_TXMAXP7 0x00000170 // USB Maximum Transmit Data
|
|
// Endpoint 7
|
|
#define USB_O_TXCSRL7 0x00000172 // USB Transmit Control and Status
|
|
// Endpoint 7 Low
|
|
#define USB_O_TXCSRH7 0x00000173 // USB Transmit Control and Status
|
|
// Endpoint 7 High
|
|
#define USB_O_RXMAXP7 0x00000174 // USB Maximum Receive Data
|
|
// Endpoint 7
|
|
#define USB_O_RXCSRL7 0x00000176 // USB Receive Control and Status
|
|
// Endpoint 7 Low
|
|
#define USB_O_RXCSRH7 0x00000177 // USB Receive Control and Status
|
|
// Endpoint 7 High
|
|
#define USB_O_RXCOUNT7 0x00000178 // USB Receive Byte Count Endpoint
|
|
// 7
|
|
#define USB_O_TXTYPE7 0x0000017A // USB Host Transmit Configure Type
|
|
// Endpoint 7
|
|
#define USB_O_TXINTERVAL7 0x0000017B // USB Host Transmit Interval
|
|
// Endpoint 7
|
|
#define USB_O_RXTYPE7 0x0000017C // USB Host Configure Receive Type
|
|
// Endpoint 7
|
|
#define USB_O_RXINTERVAL7 0x0000017D // USB Host Receive Polling
|
|
// Interval Endpoint 7
|
|
#define USB_O_TXMAXP8 0x00000180 // USB Maximum Transmit Data
|
|
// Endpoint 8
|
|
#define USB_O_TXCSRL8 0x00000182 // USB Transmit Control and Status
|
|
// Endpoint 8 Low
|
|
#define USB_O_TXCSRH8 0x00000183 // USB Transmit Control and Status
|
|
// Endpoint 8 High
|
|
#define USB_O_RXMAXP8 0x00000184 // USB Maximum Receive Data
|
|
// Endpoint 8
|
|
#define USB_O_RXCSRL8 0x00000186 // USB Receive Control and Status
|
|
// Endpoint 8 Low
|
|
#define USB_O_RXCSRH8 0x00000187 // USB Receive Control and Status
|
|
// Endpoint 8 High
|
|
#define USB_O_RXCOUNT8 0x00000188 // USB Receive Byte Count Endpoint
|
|
// 8
|
|
#define USB_O_TXTYPE8 0x0000018A // USB Host Transmit Configure Type
|
|
// Endpoint 8
|
|
#define USB_O_TXINTERVAL8 0x0000018B // USB Host Transmit Interval
|
|
// Endpoint 8
|
|
#define USB_O_RXTYPE8 0x0000018C // USB Host Configure Receive Type
|
|
// Endpoint 8
|
|
#define USB_O_RXINTERVAL8 0x0000018D // USB Host Receive Polling
|
|
// Interval Endpoint 8
|
|
#define USB_O_TXMAXP9 0x00000190 // USB Maximum Transmit Data
|
|
// Endpoint 9
|
|
#define USB_O_TXCSRL9 0x00000192 // USB Transmit Control and Status
|
|
// Endpoint 9 Low
|
|
#define USB_O_TXCSRH9 0x00000193 // USB Transmit Control and Status
|
|
// Endpoint 9 High
|
|
#define USB_O_RXMAXP9 0x00000194 // USB Maximum Receive Data
|
|
// Endpoint 9
|
|
#define USB_O_RXCSRL9 0x00000196 // USB Receive Control and Status
|
|
// Endpoint 9 Low
|
|
#define USB_O_RXCSRH9 0x00000197 // USB Receive Control and Status
|
|
// Endpoint 9 High
|
|
#define USB_O_RXCOUNT9 0x00000198 // USB Receive Byte Count Endpoint
|
|
// 9
|
|
#define USB_O_TXTYPE9 0x0000019A // USB Host Transmit Configure Type
|
|
// Endpoint 9
|
|
#define USB_O_TXINTERVAL9 0x0000019B // USB Host Transmit Interval
|
|
// Endpoint 9
|
|
#define USB_O_RXTYPE9 0x0000019C // USB Host Configure Receive Type
|
|
// Endpoint 9
|
|
#define USB_O_RXINTERVAL9 0x0000019D // USB Host Receive Polling
|
|
// Interval Endpoint 9
|
|
#define USB_O_TXMAXP10 0x000001A0 // USB Maximum Transmit Data
|
|
// Endpoint 10
|
|
#define USB_O_TXCSRL10 0x000001A2 // USB Transmit Control and Status
|
|
// Endpoint 10 Low
|
|
#define USB_O_TXCSRH10 0x000001A3 // USB Transmit Control and Status
|
|
// Endpoint 10 High
|
|
#define USB_O_RXMAXP10 0x000001A4 // USB Maximum Receive Data
|
|
// Endpoint 10
|
|
#define USB_O_RXCSRL10 0x000001A6 // USB Receive Control and Status
|
|
// Endpoint 10 Low
|
|
#define USB_O_RXCSRH10 0x000001A7 // USB Receive Control and Status
|
|
// Endpoint 10 High
|
|
#define USB_O_RXCOUNT10 0x000001A8 // USB Receive Byte Count Endpoint
|
|
// 10
|
|
#define USB_O_TXTYPE10 0x000001AA // USB Host Transmit Configure Type
|
|
// Endpoint 10
|
|
#define USB_O_TXINTERVAL10 0x000001AB // USB Host Transmit Interval
|
|
// Endpoint 10
|
|
#define USB_O_RXTYPE10 0x000001AC // USB Host Configure Receive Type
|
|
// Endpoint 10
|
|
#define USB_O_RXINTERVAL10 0x000001AD // USB Host Receive Polling
|
|
// Interval Endpoint 10
|
|
#define USB_O_TXMAXP11 0x000001B0 // USB Maximum Transmit Data
|
|
// Endpoint 11
|
|
#define USB_O_TXCSRL11 0x000001B2 // USB Transmit Control and Status
|
|
// Endpoint 11 Low
|
|
#define USB_O_TXCSRH11 0x000001B3 // USB Transmit Control and Status
|
|
// Endpoint 11 High
|
|
#define USB_O_RXMAXP11 0x000001B4 // USB Maximum Receive Data
|
|
// Endpoint 11
|
|
#define USB_O_RXCSRL11 0x000001B6 // USB Receive Control and Status
|
|
// Endpoint 11 Low
|
|
#define USB_O_RXCSRH11 0x000001B7 // USB Receive Control and Status
|
|
// Endpoint 11 High
|
|
#define USB_O_RXCOUNT11 0x000001B8 // USB Receive Byte Count Endpoint
|
|
// 11
|
|
#define USB_O_TXTYPE11 0x000001BA // USB Host Transmit Configure Type
|
|
// Endpoint 11
|
|
#define USB_O_TXINTERVAL11 0x000001BB // USB Host Transmit Interval
|
|
// Endpoint 11
|
|
#define USB_O_RXTYPE11 0x000001BC // USB Host Configure Receive Type
|
|
// Endpoint 11
|
|
#define USB_O_RXINTERVAL11 0x000001BD // USB Host Receive Polling
|
|
// Interval Endpoint 11
|
|
#define USB_O_TXMAXP12 0x000001C0 // USB Maximum Transmit Data
|
|
// Endpoint 12
|
|
#define USB_O_TXCSRL12 0x000001C2 // USB Transmit Control and Status
|
|
// Endpoint 12 Low
|
|
#define USB_O_TXCSRH12 0x000001C3 // USB Transmit Control and Status
|
|
// Endpoint 12 High
|
|
#define USB_O_RXMAXP12 0x000001C4 // USB Maximum Receive Data
|
|
// Endpoint 12
|
|
#define USB_O_RXCSRL12 0x000001C6 // USB Receive Control and Status
|
|
// Endpoint 12 Low
|
|
#define USB_O_RXCSRH12 0x000001C7 // USB Receive Control and Status
|
|
// Endpoint 12 High
|
|
#define USB_O_RXCOUNT12 0x000001C8 // USB Receive Byte Count Endpoint
|
|
// 12
|
|
#define USB_O_TXTYPE12 0x000001CA // USB Host Transmit Configure Type
|
|
// Endpoint 12
|
|
#define USB_O_TXINTERVAL12 0x000001CB // USB Host Transmit Interval
|
|
// Endpoint 12
|
|
#define USB_O_RXTYPE12 0x000001CC // USB Host Configure Receive Type
|
|
// Endpoint 12
|
|
#define USB_O_RXINTERVAL12 0x000001CD // USB Host Receive Polling
|
|
// Interval Endpoint 12
|
|
#define USB_O_TXMAXP13 0x000001D0 // USB Maximum Transmit Data
|
|
// Endpoint 13
|
|
#define USB_O_TXCSRL13 0x000001D2 // USB Transmit Control and Status
|
|
// Endpoint 13 Low
|
|
#define USB_O_TXCSRH13 0x000001D3 // USB Transmit Control and Status
|
|
// Endpoint 13 High
|
|
#define USB_O_RXMAXP13 0x000001D4 // USB Maximum Receive Data
|
|
// Endpoint 13
|
|
#define USB_O_RXCSRL13 0x000001D6 // USB Receive Control and Status
|
|
// Endpoint 13 Low
|
|
#define USB_O_RXCSRH13 0x000001D7 // USB Receive Control and Status
|
|
// Endpoint 13 High
|
|
#define USB_O_RXCOUNT13 0x000001D8 // USB Receive Byte Count Endpoint
|
|
// 13
|
|
#define USB_O_TXTYPE13 0x000001DA // USB Host Transmit Configure Type
|
|
// Endpoint 13
|
|
#define USB_O_TXINTERVAL13 0x000001DB // USB Host Transmit Interval
|
|
// Endpoint 13
|
|
#define USB_O_RXTYPE13 0x000001DC // USB Host Configure Receive Type
|
|
// Endpoint 13
|
|
#define USB_O_RXINTERVAL13 0x000001DD // USB Host Receive Polling
|
|
// Interval Endpoint 13
|
|
#define USB_O_TXMAXP14 0x000001E0 // USB Maximum Transmit Data
|
|
// Endpoint 14
|
|
#define USB_O_TXCSRL14 0x000001E2 // USB Transmit Control and Status
|
|
// Endpoint 14 Low
|
|
#define USB_O_TXCSRH14 0x000001E3 // USB Transmit Control and Status
|
|
// Endpoint 14 High
|
|
#define USB_O_RXMAXP14 0x000001E4 // USB Maximum Receive Data
|
|
// Endpoint 14
|
|
#define USB_O_RXCSRL14 0x000001E6 // USB Receive Control and Status
|
|
// Endpoint 14 Low
|
|
#define USB_O_RXCSRH14 0x000001E7 // USB Receive Control and Status
|
|
// Endpoint 14 High
|
|
#define USB_O_RXCOUNT14 0x000001E8 // USB Receive Byte Count Endpoint
|
|
// 14
|
|
#define USB_O_TXTYPE14 0x000001EA // USB Host Transmit Configure Type
|
|
// Endpoint 14
|
|
#define USB_O_TXINTERVAL14 0x000001EB // USB Host Transmit Interval
|
|
// Endpoint 14
|
|
#define USB_O_RXTYPE14 0x000001EC // USB Host Configure Receive Type
|
|
// Endpoint 14
|
|
#define USB_O_RXINTERVAL14 0x000001ED // USB Host Receive Polling
|
|
// Interval Endpoint 14
|
|
#define USB_O_TXMAXP15 0x000001F0 // USB Maximum Transmit Data
|
|
// Endpoint 15
|
|
#define USB_O_TXCSRL15 0x000001F2 // USB Transmit Control and Status
|
|
// Endpoint 15 Low
|
|
#define USB_O_TXCSRH15 0x000001F3 // USB Transmit Control and Status
|
|
// Endpoint 15 High
|
|
#define USB_O_RXMAXP15 0x000001F4 // USB Maximum Receive Data
|
|
// Endpoint 15
|
|
#define USB_O_RXCSRL15 0x000001F6 // USB Receive Control and Status
|
|
// Endpoint 15 Low
|
|
#define USB_O_RXCSRH15 0x000001F7 // USB Receive Control and Status
|
|
// Endpoint 15 High
|
|
#define USB_O_RXCOUNT15 0x000001F8 // USB Receive Byte Count Endpoint
|
|
// 15
|
|
#define USB_O_TXTYPE15 0x000001FA // USB Host Transmit Configure Type
|
|
// Endpoint 15
|
|
#define USB_O_TXINTERVAL15 0x000001FB // USB Host Transmit Interval
|
|
// Endpoint 15
|
|
#define USB_O_RXTYPE15 0x000001FC // USB Host Configure Receive Type
|
|
// Endpoint 15
|
|
#define USB_O_RXINTERVAL15 0x000001FD // USB Host Receive Polling
|
|
// Interval Endpoint 15
|
|
#define USB_O_RQPKTCOUNT1 0x00000304 // USB Request Packet Count in
|
|
// Block Transfer Endpoint 1
|
|
#define USB_O_RQPKTCOUNT2 0x00000308 // USB Request Packet Count in
|
|
// Block Transfer Endpoint 2
|
|
#define USB_O_RQPKTCOUNT3 0x0000030C // USB Request Packet Count in
|
|
// Block Transfer Endpoint 3
|
|
#define USB_O_RQPKTCOUNT4 0x00000310 // USB Request Packet Count in
|
|
// Block Transfer Endpoint 4
|
|
#define USB_O_RQPKTCOUNT5 0x00000314 // USB Request Packet Count in
|
|
// Block Transfer Endpoint 5
|
|
#define USB_O_RQPKTCOUNT6 0x00000318 // USB Request Packet Count in
|
|
// Block Transfer Endpoint 6
|
|
#define USB_O_RQPKTCOUNT7 0x0000031C // USB Request Packet Count in
|
|
// Block Transfer Endpoint 7
|
|
#define USB_O_RQPKTCOUNT8 0x00000320 // USB Request Packet Count in
|
|
// Block Transfer Endpoint 8
|
|
#define USB_O_RQPKTCOUNT9 0x00000324 // USB Request Packet Count in
|
|
// Block Transfer Endpoint 9
|
|
#define USB_O_RQPKTCOUNT10 0x00000328 // USB Request Packet Count in
|
|
// Block Transfer Endpoint 10
|
|
#define USB_O_RQPKTCOUNT11 0x0000032C // USB Request Packet Count in
|
|
// Block Transfer Endpoint 11
|
|
#define USB_O_RQPKTCOUNT12 0x00000330 // USB Request Packet Count in
|
|
// Block Transfer Endpoint 12
|
|
#define USB_O_RQPKTCOUNT13 0x00000334 // USB Request Packet Count in
|
|
// Block Transfer Endpoint 13
|
|
#define USB_O_RQPKTCOUNT14 0x00000338 // USB Request Packet Count in
|
|
// Block Transfer Endpoint 14
|
|
#define USB_O_RQPKTCOUNT15 0x0000033C // USB Request Packet Count in
|
|
// Block Transfer Endpoint 15
|
|
#define USB_O_RXDPKTBUFDIS 0x00000340 // USB Receive Double Packet Buffer
|
|
// Disable
|
|
#define USB_O_TXDPKTBUFDIS 0x00000342 // USB Transmit Double Packet
|
|
// Buffer Disable
|
|
#define USB_O_EPC 0x00000400 // USB External Power Control
|
|
#define USB_O_EPCRIS 0x00000404 // USB External Power Control Raw
|
|
// Interrupt Status
|
|
#define USB_O_EPCIM 0x00000408 // USB External Power Control
|
|
// Interrupt Mask
|
|
#define USB_O_EPCISC 0x0000040C // USB External Power Control
|
|
// Interrupt Status and Clear
|
|
#define USB_O_DRRIS 0x00000410 // USB Device RESUME Raw Interrupt
|
|
// Status
|
|
#define USB_O_DRIM 0x00000414 // USB Device RESUME Interrupt Mask
|
|
#define USB_O_DRISC 0x00000418 // USB Device RESUME Interrupt
|
|
// Status and Clear
|
|
#define USB_O_GPCS 0x0000041C // USB General-Purpose Control and
|
|
// Status
|
|
#define USB_O_VDC 0x00000430 // USB VBUS Droop Control
|
|
#define USB_O_VDCRIS 0x00000434 // USB VBUS Droop Control Raw
|
|
// Interrupt Status
|
|
#define USB_O_VDCIM 0x00000438 // USB VBUS Droop Control Interrupt
|
|
// Mask
|
|
#define USB_O_VDCISC 0x0000043C // USB VBUS Droop Control Interrupt
|
|
// Status and Clear
|
|
#define USB_O_IDVRIS 0x00000444 // USB ID Valid Detect Raw
|
|
// Interrupt Status
|
|
#define USB_O_IDVIM 0x00000448 // USB ID Valid Detect Interrupt
|
|
// Mask
|
|
#define USB_O_IDVISC 0x0000044C // USB ID Valid Detect Interrupt
|
|
// Status and Clear
|
|
#define USB_O_DMASEL 0x00000450 // USB DMA Select
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_FADDR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_FADDR_M 0x0000007F // Function Address
|
|
#define USB_FADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_POWER register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_POWER_ISOUP 0x00000080 // Isochronous Update
|
|
#define USB_POWER_SOFTCONN 0x00000040 // Soft Connect/Disconnect
|
|
#define USB_POWER_RESET 0x00000008 // RESET Signaling
|
|
#define USB_POWER_RESUME 0x00000004 // RESUME Signaling
|
|
#define USB_POWER_SUSPEND 0x00000002 // SUSPEND Mode
|
|
#define USB_POWER_PWRDNPHY 0x00000001 // Power Down PHY
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXIS_EP15 0x00008000 // TX Endpoint 15 Interrupt
|
|
#define USB_TXIS_EP14 0x00004000 // TX Endpoint 14 Interrupt
|
|
#define USB_TXIS_EP13 0x00002000 // TX Endpoint 13 Interrupt
|
|
#define USB_TXIS_EP12 0x00001000 // TX Endpoint 12 Interrupt
|
|
#define USB_TXIS_EP11 0x00000800 // TX Endpoint 11 Interrupt
|
|
#define USB_TXIS_EP10 0x00000400 // TX Endpoint 10 Interrupt
|
|
#define USB_TXIS_EP9 0x00000200 // TX Endpoint 9 Interrupt
|
|
#define USB_TXIS_EP8 0x00000100 // TX Endpoint 8 Interrupt
|
|
#define USB_TXIS_EP7 0x00000080 // TX Endpoint 7 Interrupt
|
|
#define USB_TXIS_EP6 0x00000040 // TX Endpoint 6 Interrupt
|
|
#define USB_TXIS_EP5 0x00000020 // TX Endpoint 5 Interrupt
|
|
#define USB_TXIS_EP4 0x00000010 // TX Endpoint 4 Interrupt
|
|
#define USB_TXIS_EP3 0x00000008 // TX Endpoint 3 Interrupt
|
|
#define USB_TXIS_EP2 0x00000004 // TX Endpoint 2 Interrupt
|
|
#define USB_TXIS_EP1 0x00000002 // TX Endpoint 1 Interrupt
|
|
#define USB_TXIS_EP0 0x00000001 // TX and RX Endpoint 0 Interrupt
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXIS_EP15 0x00008000 // RX Endpoint 15 Interrupt
|
|
#define USB_RXIS_EP14 0x00004000 // RX Endpoint 14 Interrupt
|
|
#define USB_RXIS_EP13 0x00002000 // RX Endpoint 13 Interrupt
|
|
#define USB_RXIS_EP12 0x00001000 // RX Endpoint 12 Interrupt
|
|
#define USB_RXIS_EP11 0x00000800 // RX Endpoint 11 Interrupt
|
|
#define USB_RXIS_EP10 0x00000400 // RX Endpoint 10 Interrupt
|
|
#define USB_RXIS_EP9 0x00000200 // RX Endpoint 9 Interrupt
|
|
#define USB_RXIS_EP8 0x00000100 // RX Endpoint 8 Interrupt
|
|
#define USB_RXIS_EP7 0x00000080 // RX Endpoint 7 Interrupt
|
|
#define USB_RXIS_EP6 0x00000040 // RX Endpoint 6 Interrupt
|
|
#define USB_RXIS_EP5 0x00000020 // RX Endpoint 5 Interrupt
|
|
#define USB_RXIS_EP4 0x00000010 // RX Endpoint 4 Interrupt
|
|
#define USB_RXIS_EP3 0x00000008 // RX Endpoint 3 Interrupt
|
|
#define USB_RXIS_EP2 0x00000004 // RX Endpoint 2 Interrupt
|
|
#define USB_RXIS_EP1 0x00000002 // RX Endpoint 1 Interrupt
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXIE register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXIE_EP15 0x00008000 // TX Endpoint 15 Interrupt Enable
|
|
#define USB_TXIE_EP14 0x00004000 // TX Endpoint 14 Interrupt Enable
|
|
#define USB_TXIE_EP13 0x00002000 // TX Endpoint 13 Interrupt Enable
|
|
#define USB_TXIE_EP12 0x00001000 // TX Endpoint 12 Interrupt Enable
|
|
#define USB_TXIE_EP11 0x00000800 // TX Endpoint 11 Interrupt Enable
|
|
#define USB_TXIE_EP10 0x00000400 // TX Endpoint 10 Interrupt Enable
|
|
#define USB_TXIE_EP9 0x00000200 // TX Endpoint 9 Interrupt Enable
|
|
#define USB_TXIE_EP8 0x00000100 // TX Endpoint 8 Interrupt Enable
|
|
#define USB_TXIE_EP7 0x00000080 // TX Endpoint 7 Interrupt Enable
|
|
#define USB_TXIE_EP6 0x00000040 // TX Endpoint 6 Interrupt Enable
|
|
#define USB_TXIE_EP5 0x00000020 // TX Endpoint 5 Interrupt Enable
|
|
#define USB_TXIE_EP4 0x00000010 // TX Endpoint 4 Interrupt Enable
|
|
#define USB_TXIE_EP3 0x00000008 // TX Endpoint 3 Interrupt Enable
|
|
#define USB_TXIE_EP2 0x00000004 // TX Endpoint 2 Interrupt Enable
|
|
#define USB_TXIE_EP1 0x00000002 // TX Endpoint 1 Interrupt Enable
|
|
#define USB_TXIE_EP0 0x00000001 // TX and RX Endpoint 0 Interrupt
|
|
// Enable
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXIE register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXIE_EP15 0x00008000 // RX Endpoint 15 Interrupt Enable
|
|
#define USB_RXIE_EP14 0x00004000 // RX Endpoint 14 Interrupt Enable
|
|
#define USB_RXIE_EP13 0x00002000 // RX Endpoint 13 Interrupt Enable
|
|
#define USB_RXIE_EP12 0x00001000 // RX Endpoint 12 Interrupt Enable
|
|
#define USB_RXIE_EP11 0x00000800 // RX Endpoint 11 Interrupt Enable
|
|
#define USB_RXIE_EP10 0x00000400 // RX Endpoint 10 Interrupt Enable
|
|
#define USB_RXIE_EP9 0x00000200 // RX Endpoint 9 Interrupt Enable
|
|
#define USB_RXIE_EP8 0x00000100 // RX Endpoint 8 Interrupt Enable
|
|
#define USB_RXIE_EP7 0x00000080 // RX Endpoint 7 Interrupt Enable
|
|
#define USB_RXIE_EP6 0x00000040 // RX Endpoint 6 Interrupt Enable
|
|
#define USB_RXIE_EP5 0x00000020 // RX Endpoint 5 Interrupt Enable
|
|
#define USB_RXIE_EP4 0x00000010 // RX Endpoint 4 Interrupt Enable
|
|
#define USB_RXIE_EP3 0x00000008 // RX Endpoint 3 Interrupt Enable
|
|
#define USB_RXIE_EP2 0x00000004 // RX Endpoint 2 Interrupt Enable
|
|
#define USB_RXIE_EP1 0x00000002 // RX Endpoint 1 Interrupt Enable
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_IS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_IS_VBUSERR 0x00000080 // VBUS Error
|
|
#define USB_IS_SESREQ 0x00000040 // SESSION REQUEST
|
|
#define USB_IS_DISCON 0x00000020 // Session Disconnect
|
|
#define USB_IS_CONN 0x00000010 // Session Connect
|
|
#define USB_IS_SOF 0x00000008 // Start of Frame
|
|
#define USB_IS_BABBLE 0x00000004 // Babble Detected
|
|
#define USB_IS_RESET 0x00000004 // RESET Signaling Detected
|
|
#define USB_IS_RESUME 0x00000002 // RESUME Signaling Detected
|
|
#define USB_IS_SUSPEND 0x00000001 // SUSPEND Signaling Detected
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_IE register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_IE_VBUSERR 0x00000080 // Enable VBUS Error Interrupt
|
|
#define USB_IE_SESREQ 0x00000040 // Enable Session Request
|
|
#define USB_IE_DISCON 0x00000020 // Enable Disconnect Interrupt
|
|
#define USB_IE_CONN 0x00000010 // Enable Connect Interrupt
|
|
#define USB_IE_SOF 0x00000008 // Enable Start-of-Frame Interrupt
|
|
#define USB_IE_BABBLE 0x00000004 // Enable Babble Interrupt
|
|
#define USB_IE_RESET 0x00000004 // Enable RESET Interrupt
|
|
#define USB_IE_RESUME 0x00000002 // Enable RESUME Interrupt
|
|
#define USB_IE_SUSPND 0x00000001 // Enable SUSPEND Interrupt
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_FRAME register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_FRAME_M 0x000007FF // Frame Number
|
|
#define USB_FRAME_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_EPIDX register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_EPIDX_EPIDX_M 0x0000000F // Endpoint Index
|
|
#define USB_EPIDX_EPIDX_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TEST register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TEST_FORCEH 0x00000080 // Force Host Mode
|
|
#define USB_TEST_FIFOACC 0x00000040 // FIFO Access
|
|
#define USB_TEST_FORCEFS 0x00000020 // Force Full-Speed Mode
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_FIFO0 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_FIFO0_EPDATA_M 0xFFFFFFFF // Endpoint Data
|
|
#define USB_FIFO0_EPDATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_FIFO1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_FIFO1_EPDATA_M 0xFFFFFFFF // Endpoint Data
|
|
#define USB_FIFO1_EPDATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_FIFO2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_FIFO2_EPDATA_M 0xFFFFFFFF // Endpoint Data
|
|
#define USB_FIFO2_EPDATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_FIFO3 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_FIFO3_EPDATA_M 0xFFFFFFFF // Endpoint Data
|
|
#define USB_FIFO3_EPDATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_FIFO4 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_FIFO4_EPDATA_M 0xFFFFFFFF // Endpoint Data
|
|
#define USB_FIFO4_EPDATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_FIFO5 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_FIFO5_EPDATA_M 0xFFFFFFFF // Endpoint Data
|
|
#define USB_FIFO5_EPDATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_FIFO6 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_FIFO6_EPDATA_M 0xFFFFFFFF // Endpoint Data
|
|
#define USB_FIFO6_EPDATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_FIFO7 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_FIFO7_EPDATA_M 0xFFFFFFFF // Endpoint Data
|
|
#define USB_FIFO7_EPDATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_FIFO8 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_FIFO8_EPDATA_M 0xFFFFFFFF // Endpoint Data
|
|
#define USB_FIFO8_EPDATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_FIFO9 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_FIFO9_EPDATA_M 0xFFFFFFFF // Endpoint Data
|
|
#define USB_FIFO9_EPDATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_FIFO10 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_FIFO10_EPDATA_M 0xFFFFFFFF // Endpoint Data
|
|
#define USB_FIFO10_EPDATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_FIFO11 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_FIFO11_EPDATA_M 0xFFFFFFFF // Endpoint Data
|
|
#define USB_FIFO11_EPDATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_FIFO12 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_FIFO12_EPDATA_M 0xFFFFFFFF // Endpoint Data
|
|
#define USB_FIFO12_EPDATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_FIFO13 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_FIFO13_EPDATA_M 0xFFFFFFFF // Endpoint Data
|
|
#define USB_FIFO13_EPDATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_FIFO14 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_FIFO14_EPDATA_M 0xFFFFFFFF // Endpoint Data
|
|
#define USB_FIFO14_EPDATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_FIFO15 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_FIFO15_EPDATA_M 0xFFFFFFFF // Endpoint Data
|
|
#define USB_FIFO15_EPDATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_DEVCTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_DEVCTL_DEV 0x00000080 // Device Mode
|
|
#define USB_DEVCTL_FSDEV 0x00000040 // Full-Speed Device Detected
|
|
#define USB_DEVCTL_LSDEV 0x00000020 // Low-Speed Device Detected
|
|
#define USB_DEVCTL_VBUS_M 0x00000018 // VBUS Level
|
|
#define USB_DEVCTL_VBUS_NONE 0x00000000 // Below SessionEnd
|
|
#define USB_DEVCTL_VBUS_SEND 0x00000008 // Above SessionEnd, below AValid
|
|
#define USB_DEVCTL_VBUS_AVALID 0x00000010 // Above AValid, below VBUSValid
|
|
#define USB_DEVCTL_VBUS_VALID 0x00000018 // Above VBUSValid
|
|
#define USB_DEVCTL_HOST 0x00000004 // Host Mode
|
|
#define USB_DEVCTL_HOSTREQ 0x00000002 // Host Request
|
|
#define USB_DEVCTL_SESSION 0x00000001 // Session Start/End
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXFIFOSZ register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXFIFOSZ_DPB 0x00000010 // Double Packet Buffer Support
|
|
#define USB_TXFIFOSZ_SIZE_M 0x0000000F // Max Packet Size
|
|
#define USB_TXFIFOSZ_SIZE_8 0x00000000 // 8
|
|
#define USB_TXFIFOSZ_SIZE_16 0x00000001 // 16
|
|
#define USB_TXFIFOSZ_SIZE_32 0x00000002 // 32
|
|
#define USB_TXFIFOSZ_SIZE_64 0x00000003 // 64
|
|
#define USB_TXFIFOSZ_SIZE_128 0x00000004 // 128
|
|
#define USB_TXFIFOSZ_SIZE_256 0x00000005 // 256
|
|
#define USB_TXFIFOSZ_SIZE_512 0x00000006 // 512
|
|
#define USB_TXFIFOSZ_SIZE_1024 0x00000007 // 1024
|
|
#define USB_TXFIFOSZ_SIZE_2048 0x00000008 // 2048
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXFIFOSZ register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXFIFOSZ_DPB 0x00000010 // Double Packet Buffer Support
|
|
#define USB_RXFIFOSZ_SIZE_M 0x0000000F // Max Packet Size
|
|
#define USB_RXFIFOSZ_SIZE_8 0x00000000 // 8
|
|
#define USB_RXFIFOSZ_SIZE_16 0x00000001 // 16
|
|
#define USB_RXFIFOSZ_SIZE_32 0x00000002 // 32
|
|
#define USB_RXFIFOSZ_SIZE_64 0x00000003 // 64
|
|
#define USB_RXFIFOSZ_SIZE_128 0x00000004 // 128
|
|
#define USB_RXFIFOSZ_SIZE_256 0x00000005 // 256
|
|
#define USB_RXFIFOSZ_SIZE_512 0x00000006 // 512
|
|
#define USB_RXFIFOSZ_SIZE_1024 0x00000007 // 1024
|
|
#define USB_RXFIFOSZ_SIZE_2048 0x00000008 // 2048
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXFIFOADD
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXFIFOADD_ADDR_M 0x000001FF // Transmit/Receive Start Address
|
|
#define USB_TXFIFOADD_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXFIFOADD
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXFIFOADD_ADDR_M 0x000001FF // Transmit/Receive Start Address
|
|
#define USB_RXFIFOADD_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_CONTIM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_CONTIM_WTCON_M 0x000000F0 // Connect Wait
|
|
#define USB_CONTIM_WTID_M 0x0000000F // Wait ID
|
|
#define USB_CONTIM_WTCON_S 4
|
|
#define USB_CONTIM_WTID_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_VPLEN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_VPLEN_VPLEN_M 0x000000FF // VBUS Pulse Length
|
|
#define USB_VPLEN_VPLEN_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_FSEOF register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_FSEOF_FSEOFG_M 0x000000FF // Full-Speed End-of-Frame Gap
|
|
#define USB_FSEOF_FSEOFG_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_LSEOF register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_LSEOF_LSEOFG_M 0x000000FF // Low-Speed End-of-Frame Gap
|
|
#define USB_LSEOF_LSEOFG_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXFUNCADDR0
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXFUNCADDR0_ADDR_M 0x0000007F // Device Address
|
|
#define USB_TXFUNCADDR0_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBADDR0
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBADDR0_MULTTRAN 0x00000080 // Multiple Translators
|
|
#define USB_TXHUBADDR0_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_TXHUBADDR0_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBPORT0
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBPORT0_PORT_M 0x0000007F // Hub Port
|
|
#define USB_TXHUBPORT0_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXFUNCADDR1
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXFUNCADDR1_ADDR_M 0x0000007F // Device Address
|
|
#define USB_TXFUNCADDR1_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBADDR1
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBADDR1_MULTTRAN 0x00000080 // Multiple Translators
|
|
#define USB_TXHUBADDR1_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_TXHUBADDR1_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBPORT1
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBPORT1_PORT_M 0x0000007F // Hub Port
|
|
#define USB_TXHUBPORT1_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXFUNCADDR1
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXFUNCADDR1_ADDR_M 0x0000007F // Device Address
|
|
#define USB_RXFUNCADDR1_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBADDR1
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBADDR1_MULTTRAN 0x00000080 // Multiple Translators
|
|
#define USB_RXHUBADDR1_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_RXHUBADDR1_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBPORT1
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBPORT1_PORT_M 0x0000007F // Hub Port
|
|
#define USB_RXHUBPORT1_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXFUNCADDR2
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXFUNCADDR2_ADDR_M 0x0000007F // Device Address
|
|
#define USB_TXFUNCADDR2_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBADDR2
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBADDR2_MULTTRAN 0x00000080 // Multiple Translators
|
|
#define USB_TXHUBADDR2_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_TXHUBADDR2_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBPORT2
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBPORT2_PORT_M 0x0000007F // Hub Port
|
|
#define USB_TXHUBPORT2_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXFUNCADDR2
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXFUNCADDR2_ADDR_M 0x0000007F // Device Address
|
|
#define USB_RXFUNCADDR2_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBADDR2
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBADDR2_MULTTRAN 0x00000080 // Multiple Translators
|
|
#define USB_RXHUBADDR2_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_RXHUBADDR2_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBPORT2
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBPORT2_PORT_M 0x0000007F // Hub Port
|
|
#define USB_RXHUBPORT2_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXFUNCADDR3
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXFUNCADDR3_ADDR_M 0x0000007F // Device Address
|
|
#define USB_TXFUNCADDR3_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBADDR3
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBADDR3_MULTTRAN 0x00000080 // Multiple Translators
|
|
#define USB_TXHUBADDR3_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_TXHUBADDR3_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBPORT3
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBPORT3_PORT_M 0x0000007F // Hub Port
|
|
#define USB_TXHUBPORT3_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXFUNCADDR3
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXFUNCADDR3_ADDR_M 0x0000007F // Device Address
|
|
#define USB_RXFUNCADDR3_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBADDR3
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBADDR3_MULTTRAN 0x00000080 // Multiple Translators
|
|
#define USB_RXHUBADDR3_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_RXHUBADDR3_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBPORT3
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBPORT3_PORT_M 0x0000007F // Hub Port
|
|
#define USB_RXHUBPORT3_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXFUNCADDR4
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXFUNCADDR4_ADDR_M 0x0000007F // Device Address
|
|
#define USB_TXFUNCADDR4_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBADDR4
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBADDR4_MULTTRAN 0x00000080 // Multiple Translators
|
|
#define USB_TXHUBADDR4_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_TXHUBADDR4_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBPORT4
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBPORT4_PORT_M 0x0000007F // Hub Port
|
|
#define USB_TXHUBPORT4_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXFUNCADDR4
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXFUNCADDR4_ADDR_M 0x0000007F // Device Address
|
|
#define USB_RXFUNCADDR4_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBADDR4
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBADDR4_MULTTRAN 0x00000080 // Multiple Translators
|
|
#define USB_RXHUBADDR4_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_RXHUBADDR4_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBPORT4
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBPORT4_PORT_M 0x0000007F // Hub Port
|
|
#define USB_RXHUBPORT4_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXFUNCADDR5
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXFUNCADDR5_ADDR_M 0x0000007F // Device Address
|
|
#define USB_TXFUNCADDR5_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBADDR5
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBADDR5_MULTTRAN 0x00000080 // Multiple Translators
|
|
#define USB_TXHUBADDR5_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_TXHUBADDR5_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBPORT5
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBPORT5_PORT_M 0x0000007F // Hub Port
|
|
#define USB_TXHUBPORT5_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXFUNCADDR5
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXFUNCADDR5_ADDR_M 0x0000007F // Device Address
|
|
#define USB_RXFUNCADDR5_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBADDR5
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBADDR5_MULTTRAN 0x00000080 // Multiple Translators
|
|
#define USB_RXHUBADDR5_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_RXHUBADDR5_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBPORT5
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBPORT5_PORT_M 0x0000007F // Hub Port
|
|
#define USB_RXHUBPORT5_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXFUNCADDR6
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXFUNCADDR6_ADDR_M 0x0000007F // Device Address
|
|
#define USB_TXFUNCADDR6_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBADDR6
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBADDR6_MULTTRAN 0x00000080 // Multiple Translators
|
|
#define USB_TXHUBADDR6_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_TXHUBADDR6_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBPORT6
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBPORT6_PORT_M 0x0000007F // Hub Port
|
|
#define USB_TXHUBPORT6_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXFUNCADDR6
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXFUNCADDR6_ADDR_M 0x0000007F // Device Address
|
|
#define USB_RXFUNCADDR6_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBADDR6
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBADDR6_MULTTRAN 0x00000080 // Multiple Translators
|
|
#define USB_RXHUBADDR6_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_RXHUBADDR6_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBPORT6
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBPORT6_PORT_M 0x0000007F // Hub Port
|
|
#define USB_RXHUBPORT6_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXFUNCADDR7
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXFUNCADDR7_ADDR_M 0x0000007F // Device Address
|
|
#define USB_TXFUNCADDR7_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBADDR7
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBADDR7_MULTTRAN 0x00000080 // Multiple Translators
|
|
#define USB_TXHUBADDR7_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_TXHUBADDR7_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBPORT7
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBPORT7_PORT_M 0x0000007F // Hub Port
|
|
#define USB_TXHUBPORT7_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXFUNCADDR7
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXFUNCADDR7_ADDR_M 0x0000007F // Device Address
|
|
#define USB_RXFUNCADDR7_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBADDR7
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBADDR7_MULTTRAN 0x00000080 // Multiple Translators
|
|
#define USB_RXHUBADDR7_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_RXHUBADDR7_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBPORT7
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBPORT7_PORT_M 0x0000007F // Hub Port
|
|
#define USB_RXHUBPORT7_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXFUNCADDR8
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXFUNCADDR8_ADDR_M 0x0000007F // Device Address
|
|
#define USB_TXFUNCADDR8_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBADDR8
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBADDR8_MULTTRAN 0x00000080 // Multiple Translators
|
|
#define USB_TXHUBADDR8_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_TXHUBADDR8_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBPORT8
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBPORT8_PORT_M 0x0000007F // Hub Port
|
|
#define USB_TXHUBPORT8_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXFUNCADDR8
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXFUNCADDR8_ADDR_M 0x0000007F // Device Address
|
|
#define USB_RXFUNCADDR8_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBADDR8
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBADDR8_MULTTRAN 0x00000080 // Multiple Translators
|
|
#define USB_RXHUBADDR8_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_RXHUBADDR8_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBPORT8
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBPORT8_PORT_M 0x0000007F // Hub Port
|
|
#define USB_RXHUBPORT8_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXFUNCADDR9
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXFUNCADDR9_ADDR_M 0x0000007F // Device Address
|
|
#define USB_TXFUNCADDR9_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBADDR9
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBADDR9_MULTTRAN 0x00000080 // Multiple Translators
|
|
#define USB_TXHUBADDR9_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_TXHUBADDR9_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBPORT9
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBPORT9_PORT_M 0x0000007F // Hub Port
|
|
#define USB_TXHUBPORT9_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXFUNCADDR9
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXFUNCADDR9_ADDR_M 0x0000007F // Device Address
|
|
#define USB_RXFUNCADDR9_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBADDR9
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBADDR9_MULTTRAN 0x00000080 // Multiple Translators
|
|
#define USB_RXHUBADDR9_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_RXHUBADDR9_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBPORT9
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBPORT9_PORT_M 0x0000007F // Hub Port
|
|
#define USB_RXHUBPORT9_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXFUNCADDR10
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXFUNCADDR10_ADDR_M 0x0000007F // Device Address
|
|
#define USB_TXFUNCADDR10_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBADDR10
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBADDR10_MULTTRAN \
|
|
0x00000080 // Multiple Translators
|
|
#define USB_TXHUBADDR10_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_TXHUBADDR10_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBPORT10
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBPORT10_PORT_M 0x0000007F // Hub Port
|
|
#define USB_TXHUBPORT10_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXFUNCADDR10
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXFUNCADDR10_ADDR_M 0x0000007F // Device Address
|
|
#define USB_RXFUNCADDR10_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBADDR10
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBADDR10_MULTTRAN \
|
|
0x00000080 // Multiple Translators
|
|
#define USB_RXHUBADDR10_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_RXHUBADDR10_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBPORT10
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBPORT10_PORT_M 0x0000007F // Hub Port
|
|
#define USB_RXHUBPORT10_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXFUNCADDR11
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXFUNCADDR11_ADDR_M 0x0000007F // Device Address
|
|
#define USB_TXFUNCADDR11_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBADDR11
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBADDR11_MULTTRAN \
|
|
0x00000080 // Multiple Translators
|
|
#define USB_TXHUBADDR11_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_TXHUBADDR11_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBPORT11
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBPORT11_PORT_M 0x0000007F // Hub Port
|
|
#define USB_TXHUBPORT11_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXFUNCADDR11
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXFUNCADDR11_ADDR_M 0x0000007F // Device Address
|
|
#define USB_RXFUNCADDR11_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBADDR11
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBADDR11_MULTTRAN \
|
|
0x00000080 // Multiple Translators
|
|
#define USB_RXHUBADDR11_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_RXHUBADDR11_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBPORT11
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBPORT11_PORT_M 0x0000007F // Hub Port
|
|
#define USB_RXHUBPORT11_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXFUNCADDR12
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXFUNCADDR12_ADDR_M 0x0000007F // Device Address
|
|
#define USB_TXFUNCADDR12_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBADDR12
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBADDR12_MULTTRAN \
|
|
0x00000080 // Multiple Translators
|
|
#define USB_TXHUBADDR12_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_TXHUBADDR12_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBPORT12
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBPORT12_PORT_M 0x0000007F // Hub Port
|
|
#define USB_TXHUBPORT12_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXFUNCADDR12
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXFUNCADDR12_ADDR_M 0x0000007F // Device Address
|
|
#define USB_RXFUNCADDR12_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBADDR12
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBADDR12_MULTTRAN \
|
|
0x00000080 // Multiple Translators
|
|
#define USB_RXHUBADDR12_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_RXHUBADDR12_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBPORT12
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBPORT12_PORT_M 0x0000007F // Hub Port
|
|
#define USB_RXHUBPORT12_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXFUNCADDR13
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXFUNCADDR13_ADDR_M 0x0000007F // Device Address
|
|
#define USB_TXFUNCADDR13_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBADDR13
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBADDR13_MULTTRAN \
|
|
0x00000080 // Multiple Translators
|
|
#define USB_TXHUBADDR13_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_TXHUBADDR13_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBPORT13
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBPORT13_PORT_M 0x0000007F // Hub Port
|
|
#define USB_TXHUBPORT13_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXFUNCADDR13
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXFUNCADDR13_ADDR_M 0x0000007F // Device Address
|
|
#define USB_RXFUNCADDR13_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBADDR13
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBADDR13_MULTTRAN \
|
|
0x00000080 // Multiple Translators
|
|
#define USB_RXHUBADDR13_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_RXHUBADDR13_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBPORT13
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBPORT13_PORT_M 0x0000007F // Hub Port
|
|
#define USB_RXHUBPORT13_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXFUNCADDR14
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXFUNCADDR14_ADDR_M 0x0000007F // Device Address
|
|
#define USB_TXFUNCADDR14_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBADDR14
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBADDR14_MULTTRAN \
|
|
0x00000080 // Multiple Translators
|
|
#define USB_TXHUBADDR14_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_TXHUBADDR14_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBPORT14
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBPORT14_PORT_M 0x0000007F // Hub Port
|
|
#define USB_TXHUBPORT14_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXFUNCADDR14
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXFUNCADDR14_ADDR_M 0x0000007F // Device Address
|
|
#define USB_RXFUNCADDR14_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBADDR14
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBADDR14_MULTTRAN \
|
|
0x00000080 // Multiple Translators
|
|
#define USB_RXHUBADDR14_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_RXHUBADDR14_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBPORT14
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBPORT14_PORT_M 0x0000007F // Hub Port
|
|
#define USB_RXHUBPORT14_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXFUNCADDR15
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXFUNCADDR15_ADDR_M 0x0000007F // Device Address
|
|
#define USB_TXFUNCADDR15_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBADDR15
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBADDR15_MULTTRAN \
|
|
0x00000080 // Multiple Translators
|
|
#define USB_TXHUBADDR15_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_TXHUBADDR15_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXHUBPORT15
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXHUBPORT15_PORT_M 0x0000007F // Hub Port
|
|
#define USB_TXHUBPORT15_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXFUNCADDR15
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXFUNCADDR15_ADDR_M 0x0000007F // Device Address
|
|
#define USB_RXFUNCADDR15_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBADDR15
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBADDR15_MULTTRAN \
|
|
0x00000080 // Multiple Translators
|
|
#define USB_RXHUBADDR15_ADDR_M 0x0000007F // Hub Address
|
|
#define USB_RXHUBADDR15_ADDR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXHUBPORT15
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXHUBPORT15_PORT_M 0x0000007F // Hub Port
|
|
#define USB_RXHUBPORT15_PORT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_CSRL0 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_CSRL0_NAKTO 0x00000080 // NAK Timeout
|
|
#define USB_CSRL0_SETENDC 0x00000080 // Setup End Clear
|
|
#define USB_CSRL0_STATUS 0x00000040 // STATUS Packet
|
|
#define USB_CSRL0_RXRDYC 0x00000040 // RXRDY Clear
|
|
#define USB_CSRL0_REQPKT 0x00000020 // Request Packet
|
|
#define USB_CSRL0_STALL 0x00000020 // Send Stall
|
|
#define USB_CSRL0_SETEND 0x00000010 // Setup End
|
|
#define USB_CSRL0_ERROR 0x00000010 // Error
|
|
#define USB_CSRL0_DATAEND 0x00000008 // Data End
|
|
#define USB_CSRL0_SETUP 0x00000008 // Setup Packet
|
|
#define USB_CSRL0_STALLED 0x00000004 // Endpoint Stalled
|
|
#define USB_CSRL0_TXRDY 0x00000002 // Transmit Packet Ready
|
|
#define USB_CSRL0_RXRDY 0x00000001 // Receive Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_CSRH0 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_CSRH0_DTWE 0x00000004 // Data Toggle Write Enable
|
|
#define USB_CSRH0_DT 0x00000002 // Data Toggle
|
|
#define USB_CSRH0_FLUSH 0x00000001 // Flush FIFO
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_COUNT0 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_COUNT0_COUNT_M 0x0000007F // FIFO Count
|
|
#define USB_COUNT0_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TYPE0 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TYPE0_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_TYPE0_SPEED_FULL 0x00000080 // Full
|
|
#define USB_TYPE0_SPEED_LOW 0x000000C0 // Low
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_NAKLMT register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_NAKLMT_NAKLMT_M 0x0000001F // EP0 NAK Limit
|
|
#define USB_NAKLMT_NAKLMT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXMAXP1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXMAXP1_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_TXMAXP1_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRL1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRL1_NAKTO 0x00000080 // NAK Timeout
|
|
#define USB_TXCSRL1_CLRDT 0x00000040 // Clear Data Toggle
|
|
#define USB_TXCSRL1_STALLED 0x00000020 // Endpoint Stalled
|
|
#define USB_TXCSRL1_STALL 0x00000010 // Send STALL
|
|
#define USB_TXCSRL1_SETUP 0x00000010 // Setup Packet
|
|
#define USB_TXCSRL1_FLUSH 0x00000008 // Flush FIFO
|
|
#define USB_TXCSRL1_ERROR 0x00000004 // Error
|
|
#define USB_TXCSRL1_UNDRN 0x00000004 // Underrun
|
|
#define USB_TXCSRL1_FIFONE 0x00000002 // FIFO Not Empty
|
|
#define USB_TXCSRL1_TXRDY 0x00000001 // Transmit Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRH1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRH1_AUTOSET 0x00000080 // Auto Set
|
|
#define USB_TXCSRH1_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_TXCSRH1_MODE 0x00000020 // Mode
|
|
#define USB_TXCSRH1_DMAEN 0x00000010 // DMA Request Enable
|
|
#define USB_TXCSRH1_FDT 0x00000008 // Force Data Toggle
|
|
#define USB_TXCSRH1_DMAMOD 0x00000004 // DMA Request Mode
|
|
#define USB_TXCSRH1_DTWE 0x00000002 // Data Toggle Write Enable
|
|
#define USB_TXCSRH1_DT 0x00000001 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXMAXP1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXMAXP1_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_RXMAXP1_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRL1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRL1_CLRDT 0x00000080 // Clear Data Toggle
|
|
#define USB_RXCSRL1_STALLED 0x00000040 // Endpoint Stalled
|
|
#define USB_RXCSRL1_STALL 0x00000020 // Send STALL
|
|
#define USB_RXCSRL1_REQPKT 0x00000020 // Request Packet
|
|
#define USB_RXCSRL1_FLUSH 0x00000010 // Flush FIFO
|
|
#define USB_RXCSRL1_DATAERR 0x00000008 // Data Error
|
|
#define USB_RXCSRL1_NAKTO 0x00000008 // NAK Timeout
|
|
#define USB_RXCSRL1_OVER 0x00000004 // Overrun
|
|
#define USB_RXCSRL1_ERROR 0x00000004 // Error
|
|
#define USB_RXCSRL1_FULL 0x00000002 // FIFO Full
|
|
#define USB_RXCSRL1_RXRDY 0x00000001 // Receive Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRH1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRH1_AUTOCL 0x00000080 // Auto Clear
|
|
#define USB_RXCSRH1_AUTORQ 0x00000040 // Auto Request
|
|
#define USB_RXCSRH1_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_RXCSRH1_DMAEN 0x00000020 // DMA Request Enable
|
|
#define USB_RXCSRH1_DISNYET 0x00000010 // Disable NYET
|
|
#define USB_RXCSRH1_PIDERR 0x00000010 // PID Error
|
|
#define USB_RXCSRH1_DMAMOD 0x00000008 // DMA Request Mode
|
|
#define USB_RXCSRH1_DTWE 0x00000004 // Data Toggle Write Enable
|
|
#define USB_RXCSRH1_DT 0x00000002 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCOUNT1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCOUNT1_COUNT_M 0x00001FFF // Receive Packet Count
|
|
#define USB_RXCOUNT1_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXTYPE1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXTYPE1_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_TXTYPE1_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_TXTYPE1_SPEED_FULL 0x00000080 // Full
|
|
#define USB_TXTYPE1_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_TXTYPE1_PROTO_M 0x00000030 // Protocol
|
|
#define USB_TXTYPE1_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_TXTYPE1_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_TXTYPE1_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_TXTYPE1_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_TXTYPE1_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_TXTYPE1_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXINTERVAL1
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXINTERVAL1_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_TXINTERVAL1_TXPOLL_M \
|
|
0x000000FF // TX Polling
|
|
#define USB_TXINTERVAL1_TXPOLL_S \
|
|
0
|
|
#define USB_TXINTERVAL1_NAKLMT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXTYPE1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXTYPE1_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_RXTYPE1_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_RXTYPE1_SPEED_FULL 0x00000080 // Full
|
|
#define USB_RXTYPE1_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_RXTYPE1_PROTO_M 0x00000030 // Protocol
|
|
#define USB_RXTYPE1_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_RXTYPE1_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_RXTYPE1_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_RXTYPE1_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_RXTYPE1_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_RXTYPE1_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXINTERVAL1
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXINTERVAL1_TXPOLL_M \
|
|
0x000000FF // RX Polling
|
|
#define USB_RXINTERVAL1_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_RXINTERVAL1_TXPOLL_S \
|
|
0
|
|
#define USB_RXINTERVAL1_NAKLMT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXMAXP2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXMAXP2_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_TXMAXP2_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRL2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRL2_NAKTO 0x00000080 // NAK Timeout
|
|
#define USB_TXCSRL2_CLRDT 0x00000040 // Clear Data Toggle
|
|
#define USB_TXCSRL2_STALLED 0x00000020 // Endpoint Stalled
|
|
#define USB_TXCSRL2_SETUP 0x00000010 // Setup Packet
|
|
#define USB_TXCSRL2_STALL 0x00000010 // Send STALL
|
|
#define USB_TXCSRL2_FLUSH 0x00000008 // Flush FIFO
|
|
#define USB_TXCSRL2_ERROR 0x00000004 // Error
|
|
#define USB_TXCSRL2_UNDRN 0x00000004 // Underrun
|
|
#define USB_TXCSRL2_FIFONE 0x00000002 // FIFO Not Empty
|
|
#define USB_TXCSRL2_TXRDY 0x00000001 // Transmit Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRH2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRH2_AUTOSET 0x00000080 // Auto Set
|
|
#define USB_TXCSRH2_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_TXCSRH2_MODE 0x00000020 // Mode
|
|
#define USB_TXCSRH2_DMAEN 0x00000010 // DMA Request Enable
|
|
#define USB_TXCSRH2_FDT 0x00000008 // Force Data Toggle
|
|
#define USB_TXCSRH2_DMAMOD 0x00000004 // DMA Request Mode
|
|
#define USB_TXCSRH2_DTWE 0x00000002 // Data Toggle Write Enable
|
|
#define USB_TXCSRH2_DT 0x00000001 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXMAXP2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXMAXP2_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_RXMAXP2_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRL2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRL2_CLRDT 0x00000080 // Clear Data Toggle
|
|
#define USB_RXCSRL2_STALLED 0x00000040 // Endpoint Stalled
|
|
#define USB_RXCSRL2_REQPKT 0x00000020 // Request Packet
|
|
#define USB_RXCSRL2_STALL 0x00000020 // Send STALL
|
|
#define USB_RXCSRL2_FLUSH 0x00000010 // Flush FIFO
|
|
#define USB_RXCSRL2_DATAERR 0x00000008 // Data Error
|
|
#define USB_RXCSRL2_NAKTO 0x00000008 // NAK Timeout
|
|
#define USB_RXCSRL2_ERROR 0x00000004 // Error
|
|
#define USB_RXCSRL2_OVER 0x00000004 // Overrun
|
|
#define USB_RXCSRL2_FULL 0x00000002 // FIFO Full
|
|
#define USB_RXCSRL2_RXRDY 0x00000001 // Receive Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRH2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRH2_AUTOCL 0x00000080 // Auto Clear
|
|
#define USB_RXCSRH2_AUTORQ 0x00000040 // Auto Request
|
|
#define USB_RXCSRH2_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_RXCSRH2_DMAEN 0x00000020 // DMA Request Enable
|
|
#define USB_RXCSRH2_DISNYET 0x00000010 // Disable NYET
|
|
#define USB_RXCSRH2_PIDERR 0x00000010 // PID Error
|
|
#define USB_RXCSRH2_DMAMOD 0x00000008 // DMA Request Mode
|
|
#define USB_RXCSRH2_DTWE 0x00000004 // Data Toggle Write Enable
|
|
#define USB_RXCSRH2_DT 0x00000002 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCOUNT2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCOUNT2_COUNT_M 0x00001FFF // Receive Packet Count
|
|
#define USB_RXCOUNT2_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXTYPE2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXTYPE2_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_TXTYPE2_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_TXTYPE2_SPEED_FULL 0x00000080 // Full
|
|
#define USB_TXTYPE2_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_TXTYPE2_PROTO_M 0x00000030 // Protocol
|
|
#define USB_TXTYPE2_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_TXTYPE2_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_TXTYPE2_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_TXTYPE2_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_TXTYPE2_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_TXTYPE2_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXINTERVAL2
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXINTERVAL2_TXPOLL_M \
|
|
0x000000FF // TX Polling
|
|
#define USB_TXINTERVAL2_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_TXINTERVAL2_NAKLMT_S \
|
|
0
|
|
#define USB_TXINTERVAL2_TXPOLL_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXTYPE2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXTYPE2_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_RXTYPE2_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_RXTYPE2_SPEED_FULL 0x00000080 // Full
|
|
#define USB_RXTYPE2_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_RXTYPE2_PROTO_M 0x00000030 // Protocol
|
|
#define USB_RXTYPE2_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_RXTYPE2_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_RXTYPE2_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_RXTYPE2_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_RXTYPE2_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_RXTYPE2_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXINTERVAL2
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXINTERVAL2_TXPOLL_M \
|
|
0x000000FF // RX Polling
|
|
#define USB_RXINTERVAL2_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_RXINTERVAL2_TXPOLL_S \
|
|
0
|
|
#define USB_RXINTERVAL2_NAKLMT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXMAXP3 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXMAXP3_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_TXMAXP3_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRL3 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRL3_NAKTO 0x00000080 // NAK Timeout
|
|
#define USB_TXCSRL3_CLRDT 0x00000040 // Clear Data Toggle
|
|
#define USB_TXCSRL3_STALLED 0x00000020 // Endpoint Stalled
|
|
#define USB_TXCSRL3_SETUP 0x00000010 // Setup Packet
|
|
#define USB_TXCSRL3_STALL 0x00000010 // Send STALL
|
|
#define USB_TXCSRL3_FLUSH 0x00000008 // Flush FIFO
|
|
#define USB_TXCSRL3_ERROR 0x00000004 // Error
|
|
#define USB_TXCSRL3_UNDRN 0x00000004 // Underrun
|
|
#define USB_TXCSRL3_FIFONE 0x00000002 // FIFO Not Empty
|
|
#define USB_TXCSRL3_TXRDY 0x00000001 // Transmit Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRH3 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRH3_AUTOSET 0x00000080 // Auto Set
|
|
#define USB_TXCSRH3_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_TXCSRH3_MODE 0x00000020 // Mode
|
|
#define USB_TXCSRH3_DMAEN 0x00000010 // DMA Request Enable
|
|
#define USB_TXCSRH3_FDT 0x00000008 // Force Data Toggle
|
|
#define USB_TXCSRH3_DMAMOD 0x00000004 // DMA Request Mode
|
|
#define USB_TXCSRH3_DTWE 0x00000002 // Data Toggle Write Enable
|
|
#define USB_TXCSRH3_DT 0x00000001 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXMAXP3 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXMAXP3_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_RXMAXP3_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRL3 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRL3_CLRDT 0x00000080 // Clear Data Toggle
|
|
#define USB_RXCSRL3_STALLED 0x00000040 // Endpoint Stalled
|
|
#define USB_RXCSRL3_STALL 0x00000020 // Send STALL
|
|
#define USB_RXCSRL3_REQPKT 0x00000020 // Request Packet
|
|
#define USB_RXCSRL3_FLUSH 0x00000010 // Flush FIFO
|
|
#define USB_RXCSRL3_DATAERR 0x00000008 // Data Error
|
|
#define USB_RXCSRL3_NAKTO 0x00000008 // NAK Timeout
|
|
#define USB_RXCSRL3_ERROR 0x00000004 // Error
|
|
#define USB_RXCSRL3_OVER 0x00000004 // Overrun
|
|
#define USB_RXCSRL3_FULL 0x00000002 // FIFO Full
|
|
#define USB_RXCSRL3_RXRDY 0x00000001 // Receive Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRH3 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRH3_AUTOCL 0x00000080 // Auto Clear
|
|
#define USB_RXCSRH3_AUTORQ 0x00000040 // Auto Request
|
|
#define USB_RXCSRH3_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_RXCSRH3_DMAEN 0x00000020 // DMA Request Enable
|
|
#define USB_RXCSRH3_DISNYET 0x00000010 // Disable NYET
|
|
#define USB_RXCSRH3_PIDERR 0x00000010 // PID Error
|
|
#define USB_RXCSRH3_DMAMOD 0x00000008 // DMA Request Mode
|
|
#define USB_RXCSRH3_DTWE 0x00000004 // Data Toggle Write Enable
|
|
#define USB_RXCSRH3_DT 0x00000002 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCOUNT3 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCOUNT3_COUNT_M 0x00001FFF // Receive Packet Count
|
|
#define USB_RXCOUNT3_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXTYPE3 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXTYPE3_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_TXTYPE3_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_TXTYPE3_SPEED_FULL 0x00000080 // Full
|
|
#define USB_TXTYPE3_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_TXTYPE3_PROTO_M 0x00000030 // Protocol
|
|
#define USB_TXTYPE3_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_TXTYPE3_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_TXTYPE3_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_TXTYPE3_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_TXTYPE3_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_TXTYPE3_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXINTERVAL3
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXINTERVAL3_TXPOLL_M \
|
|
0x000000FF // TX Polling
|
|
#define USB_TXINTERVAL3_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_TXINTERVAL3_TXPOLL_S \
|
|
0
|
|
#define USB_TXINTERVAL3_NAKLMT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXTYPE3 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXTYPE3_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_RXTYPE3_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_RXTYPE3_SPEED_FULL 0x00000080 // Full
|
|
#define USB_RXTYPE3_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_RXTYPE3_PROTO_M 0x00000030 // Protocol
|
|
#define USB_RXTYPE3_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_RXTYPE3_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_RXTYPE3_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_RXTYPE3_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_RXTYPE3_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_RXTYPE3_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXINTERVAL3
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXINTERVAL3_TXPOLL_M \
|
|
0x000000FF // RX Polling
|
|
#define USB_RXINTERVAL3_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_RXINTERVAL3_TXPOLL_S \
|
|
0
|
|
#define USB_RXINTERVAL3_NAKLMT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXMAXP4 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXMAXP4_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_TXMAXP4_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRL4 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRL4_NAKTO 0x00000080 // NAK Timeout
|
|
#define USB_TXCSRL4_CLRDT 0x00000040 // Clear Data Toggle
|
|
#define USB_TXCSRL4_STALLED 0x00000020 // Endpoint Stalled
|
|
#define USB_TXCSRL4_SETUP 0x00000010 // Setup Packet
|
|
#define USB_TXCSRL4_STALL 0x00000010 // Send STALL
|
|
#define USB_TXCSRL4_FLUSH 0x00000008 // Flush FIFO
|
|
#define USB_TXCSRL4_ERROR 0x00000004 // Error
|
|
#define USB_TXCSRL4_UNDRN 0x00000004 // Underrun
|
|
#define USB_TXCSRL4_FIFONE 0x00000002 // FIFO Not Empty
|
|
#define USB_TXCSRL4_TXRDY 0x00000001 // Transmit Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRH4 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRH4_AUTOSET 0x00000080 // Auto Set
|
|
#define USB_TXCSRH4_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_TXCSRH4_MODE 0x00000020 // Mode
|
|
#define USB_TXCSRH4_DMAEN 0x00000010 // DMA Request Enable
|
|
#define USB_TXCSRH4_FDT 0x00000008 // Force Data Toggle
|
|
#define USB_TXCSRH4_DMAMOD 0x00000004 // DMA Request Mode
|
|
#define USB_TXCSRH4_DTWE 0x00000002 // Data Toggle Write Enable
|
|
#define USB_TXCSRH4_DT 0x00000001 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXMAXP4 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXMAXP4_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_RXMAXP4_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRL4 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRL4_CLRDT 0x00000080 // Clear Data Toggle
|
|
#define USB_RXCSRL4_STALLED 0x00000040 // Endpoint Stalled
|
|
#define USB_RXCSRL4_STALL 0x00000020 // Send STALL
|
|
#define USB_RXCSRL4_REQPKT 0x00000020 // Request Packet
|
|
#define USB_RXCSRL4_FLUSH 0x00000010 // Flush FIFO
|
|
#define USB_RXCSRL4_NAKTO 0x00000008 // NAK Timeout
|
|
#define USB_RXCSRL4_DATAERR 0x00000008 // Data Error
|
|
#define USB_RXCSRL4_OVER 0x00000004 // Overrun
|
|
#define USB_RXCSRL4_ERROR 0x00000004 // Error
|
|
#define USB_RXCSRL4_FULL 0x00000002 // FIFO Full
|
|
#define USB_RXCSRL4_RXRDY 0x00000001 // Receive Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRH4 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRH4_AUTOCL 0x00000080 // Auto Clear
|
|
#define USB_RXCSRH4_AUTORQ 0x00000040 // Auto Request
|
|
#define USB_RXCSRH4_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_RXCSRH4_DMAEN 0x00000020 // DMA Request Enable
|
|
#define USB_RXCSRH4_DISNYET 0x00000010 // Disable NYET
|
|
#define USB_RXCSRH4_PIDERR 0x00000010 // PID Error
|
|
#define USB_RXCSRH4_DMAMOD 0x00000008 // DMA Request Mode
|
|
#define USB_RXCSRH4_DTWE 0x00000004 // Data Toggle Write Enable
|
|
#define USB_RXCSRH4_DT 0x00000002 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCOUNT4 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCOUNT4_COUNT_M 0x00001FFF // Receive Packet Count
|
|
#define USB_RXCOUNT4_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXTYPE4 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXTYPE4_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_TXTYPE4_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_TXTYPE4_SPEED_FULL 0x00000080 // Full
|
|
#define USB_TXTYPE4_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_TXTYPE4_PROTO_M 0x00000030 // Protocol
|
|
#define USB_TXTYPE4_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_TXTYPE4_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_TXTYPE4_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_TXTYPE4_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_TXTYPE4_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_TXTYPE4_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXINTERVAL4
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXINTERVAL4_TXPOLL_M \
|
|
0x000000FF // TX Polling
|
|
#define USB_TXINTERVAL4_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_TXINTERVAL4_NAKLMT_S \
|
|
0
|
|
#define USB_TXINTERVAL4_TXPOLL_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXTYPE4 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXTYPE4_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_RXTYPE4_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_RXTYPE4_SPEED_FULL 0x00000080 // Full
|
|
#define USB_RXTYPE4_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_RXTYPE4_PROTO_M 0x00000030 // Protocol
|
|
#define USB_RXTYPE4_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_RXTYPE4_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_RXTYPE4_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_RXTYPE4_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_RXTYPE4_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_RXTYPE4_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXINTERVAL4
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXINTERVAL4_TXPOLL_M \
|
|
0x000000FF // RX Polling
|
|
#define USB_RXINTERVAL4_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_RXINTERVAL4_NAKLMT_S \
|
|
0
|
|
#define USB_RXINTERVAL4_TXPOLL_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXMAXP5 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXMAXP5_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_TXMAXP5_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRL5 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRL5_NAKTO 0x00000080 // NAK Timeout
|
|
#define USB_TXCSRL5_CLRDT 0x00000040 // Clear Data Toggle
|
|
#define USB_TXCSRL5_STALLED 0x00000020 // Endpoint Stalled
|
|
#define USB_TXCSRL5_SETUP 0x00000010 // Setup Packet
|
|
#define USB_TXCSRL5_STALL 0x00000010 // Send STALL
|
|
#define USB_TXCSRL5_FLUSH 0x00000008 // Flush FIFO
|
|
#define USB_TXCSRL5_ERROR 0x00000004 // Error
|
|
#define USB_TXCSRL5_UNDRN 0x00000004 // Underrun
|
|
#define USB_TXCSRL5_FIFONE 0x00000002 // FIFO Not Empty
|
|
#define USB_TXCSRL5_TXRDY 0x00000001 // Transmit Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRH5 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRH5_AUTOSET 0x00000080 // Auto Set
|
|
#define USB_TXCSRH5_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_TXCSRH5_MODE 0x00000020 // Mode
|
|
#define USB_TXCSRH5_DMAEN 0x00000010 // DMA Request Enable
|
|
#define USB_TXCSRH5_FDT 0x00000008 // Force Data Toggle
|
|
#define USB_TXCSRH5_DMAMOD 0x00000004 // DMA Request Mode
|
|
#define USB_TXCSRH5_DTWE 0x00000002 // Data Toggle Write Enable
|
|
#define USB_TXCSRH5_DT 0x00000001 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXMAXP5 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXMAXP5_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_RXMAXP5_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRL5 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRL5_CLRDT 0x00000080 // Clear Data Toggle
|
|
#define USB_RXCSRL5_STALLED 0x00000040 // Endpoint Stalled
|
|
#define USB_RXCSRL5_STALL 0x00000020 // Send STALL
|
|
#define USB_RXCSRL5_REQPKT 0x00000020 // Request Packet
|
|
#define USB_RXCSRL5_FLUSH 0x00000010 // Flush FIFO
|
|
#define USB_RXCSRL5_NAKTO 0x00000008 // NAK Timeout
|
|
#define USB_RXCSRL5_DATAERR 0x00000008 // Data Error
|
|
#define USB_RXCSRL5_ERROR 0x00000004 // Error
|
|
#define USB_RXCSRL5_OVER 0x00000004 // Overrun
|
|
#define USB_RXCSRL5_FULL 0x00000002 // FIFO Full
|
|
#define USB_RXCSRL5_RXRDY 0x00000001 // Receive Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRH5 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRH5_AUTOCL 0x00000080 // Auto Clear
|
|
#define USB_RXCSRH5_AUTORQ 0x00000040 // Auto Request
|
|
#define USB_RXCSRH5_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_RXCSRH5_DMAEN 0x00000020 // DMA Request Enable
|
|
#define USB_RXCSRH5_DISNYET 0x00000010 // Disable NYET
|
|
#define USB_RXCSRH5_PIDERR 0x00000010 // PID Error
|
|
#define USB_RXCSRH5_DMAMOD 0x00000008 // DMA Request Mode
|
|
#define USB_RXCSRH5_DTWE 0x00000004 // Data Toggle Write Enable
|
|
#define USB_RXCSRH5_DT 0x00000002 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCOUNT5 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCOUNT5_COUNT_M 0x00001FFF // Receive Packet Count
|
|
#define USB_RXCOUNT5_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXTYPE5 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXTYPE5_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_TXTYPE5_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_TXTYPE5_SPEED_FULL 0x00000080 // Full
|
|
#define USB_TXTYPE5_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_TXTYPE5_PROTO_M 0x00000030 // Protocol
|
|
#define USB_TXTYPE5_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_TXTYPE5_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_TXTYPE5_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_TXTYPE5_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_TXTYPE5_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_TXTYPE5_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXINTERVAL5
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXINTERVAL5_TXPOLL_M \
|
|
0x000000FF // TX Polling
|
|
#define USB_TXINTERVAL5_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_TXINTERVAL5_NAKLMT_S \
|
|
0
|
|
#define USB_TXINTERVAL5_TXPOLL_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXTYPE5 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXTYPE5_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_RXTYPE5_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_RXTYPE5_SPEED_FULL 0x00000080 // Full
|
|
#define USB_RXTYPE5_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_RXTYPE5_PROTO_M 0x00000030 // Protocol
|
|
#define USB_RXTYPE5_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_RXTYPE5_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_RXTYPE5_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_RXTYPE5_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_RXTYPE5_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_RXTYPE5_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXINTERVAL5
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXINTERVAL5_TXPOLL_M \
|
|
0x000000FF // RX Polling
|
|
#define USB_RXINTERVAL5_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_RXINTERVAL5_TXPOLL_S \
|
|
0
|
|
#define USB_RXINTERVAL5_NAKLMT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXMAXP6 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXMAXP6_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_TXMAXP6_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRL6 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRL6_NAKTO 0x00000080 // NAK Timeout
|
|
#define USB_TXCSRL6_CLRDT 0x00000040 // Clear Data Toggle
|
|
#define USB_TXCSRL6_STALLED 0x00000020 // Endpoint Stalled
|
|
#define USB_TXCSRL6_STALL 0x00000010 // Send STALL
|
|
#define USB_TXCSRL6_SETUP 0x00000010 // Setup Packet
|
|
#define USB_TXCSRL6_FLUSH 0x00000008 // Flush FIFO
|
|
#define USB_TXCSRL6_ERROR 0x00000004 // Error
|
|
#define USB_TXCSRL6_UNDRN 0x00000004 // Underrun
|
|
#define USB_TXCSRL6_FIFONE 0x00000002 // FIFO Not Empty
|
|
#define USB_TXCSRL6_TXRDY 0x00000001 // Transmit Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRH6 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRH6_AUTOSET 0x00000080 // Auto Set
|
|
#define USB_TXCSRH6_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_TXCSRH6_MODE 0x00000020 // Mode
|
|
#define USB_TXCSRH6_DMAEN 0x00000010 // DMA Request Enable
|
|
#define USB_TXCSRH6_FDT 0x00000008 // Force Data Toggle
|
|
#define USB_TXCSRH6_DMAMOD 0x00000004 // DMA Request Mode
|
|
#define USB_TXCSRH6_DTWE 0x00000002 // Data Toggle Write Enable
|
|
#define USB_TXCSRH6_DT 0x00000001 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXMAXP6 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXMAXP6_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_RXMAXP6_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRL6 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRL6_CLRDT 0x00000080 // Clear Data Toggle
|
|
#define USB_RXCSRL6_STALLED 0x00000040 // Endpoint Stalled
|
|
#define USB_RXCSRL6_REQPKT 0x00000020 // Request Packet
|
|
#define USB_RXCSRL6_STALL 0x00000020 // Send STALL
|
|
#define USB_RXCSRL6_FLUSH 0x00000010 // Flush FIFO
|
|
#define USB_RXCSRL6_NAKTO 0x00000008 // NAK Timeout
|
|
#define USB_RXCSRL6_DATAERR 0x00000008 // Data Error
|
|
#define USB_RXCSRL6_ERROR 0x00000004 // Error
|
|
#define USB_RXCSRL6_OVER 0x00000004 // Overrun
|
|
#define USB_RXCSRL6_FULL 0x00000002 // FIFO Full
|
|
#define USB_RXCSRL6_RXRDY 0x00000001 // Receive Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRH6 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRH6_AUTOCL 0x00000080 // Auto Clear
|
|
#define USB_RXCSRH6_AUTORQ 0x00000040 // Auto Request
|
|
#define USB_RXCSRH6_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_RXCSRH6_DMAEN 0x00000020 // DMA Request Enable
|
|
#define USB_RXCSRH6_DISNYET 0x00000010 // Disable NYET
|
|
#define USB_RXCSRH6_PIDERR 0x00000010 // PID Error
|
|
#define USB_RXCSRH6_DMAMOD 0x00000008 // DMA Request Mode
|
|
#define USB_RXCSRH6_DTWE 0x00000004 // Data Toggle Write Enable
|
|
#define USB_RXCSRH6_DT 0x00000002 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCOUNT6 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCOUNT6_COUNT_M 0x00001FFF // Receive Packet Count
|
|
#define USB_RXCOUNT6_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXTYPE6 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXTYPE6_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_TXTYPE6_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_TXTYPE6_SPEED_FULL 0x00000080 // Full
|
|
#define USB_TXTYPE6_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_TXTYPE6_PROTO_M 0x00000030 // Protocol
|
|
#define USB_TXTYPE6_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_TXTYPE6_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_TXTYPE6_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_TXTYPE6_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_TXTYPE6_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_TXTYPE6_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXINTERVAL6
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXINTERVAL6_TXPOLL_M \
|
|
0x000000FF // TX Polling
|
|
#define USB_TXINTERVAL6_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_TXINTERVAL6_TXPOLL_S \
|
|
0
|
|
#define USB_TXINTERVAL6_NAKLMT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXTYPE6 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXTYPE6_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_RXTYPE6_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_RXTYPE6_SPEED_FULL 0x00000080 // Full
|
|
#define USB_RXTYPE6_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_RXTYPE6_PROTO_M 0x00000030 // Protocol
|
|
#define USB_RXTYPE6_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_RXTYPE6_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_RXTYPE6_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_RXTYPE6_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_RXTYPE6_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_RXTYPE6_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXINTERVAL6
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXINTERVAL6_TXPOLL_M \
|
|
0x000000FF // RX Polling
|
|
#define USB_RXINTERVAL6_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_RXINTERVAL6_NAKLMT_S \
|
|
0
|
|
#define USB_RXINTERVAL6_TXPOLL_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXMAXP7 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXMAXP7_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_TXMAXP7_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRL7 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRL7_NAKTO 0x00000080 // NAK Timeout
|
|
#define USB_TXCSRL7_CLRDT 0x00000040 // Clear Data Toggle
|
|
#define USB_TXCSRL7_STALLED 0x00000020 // Endpoint Stalled
|
|
#define USB_TXCSRL7_STALL 0x00000010 // Send STALL
|
|
#define USB_TXCSRL7_SETUP 0x00000010 // Setup Packet
|
|
#define USB_TXCSRL7_FLUSH 0x00000008 // Flush FIFO
|
|
#define USB_TXCSRL7_ERROR 0x00000004 // Error
|
|
#define USB_TXCSRL7_UNDRN 0x00000004 // Underrun
|
|
#define USB_TXCSRL7_FIFONE 0x00000002 // FIFO Not Empty
|
|
#define USB_TXCSRL7_TXRDY 0x00000001 // Transmit Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRH7 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRH7_AUTOSET 0x00000080 // Auto Set
|
|
#define USB_TXCSRH7_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_TXCSRH7_MODE 0x00000020 // Mode
|
|
#define USB_TXCSRH7_DMAEN 0x00000010 // DMA Request Enable
|
|
#define USB_TXCSRH7_FDT 0x00000008 // Force Data Toggle
|
|
#define USB_TXCSRH7_DMAMOD 0x00000004 // DMA Request Mode
|
|
#define USB_TXCSRH7_DTWE 0x00000002 // Data Toggle Write Enable
|
|
#define USB_TXCSRH7_DT 0x00000001 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXMAXP7 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXMAXP7_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_RXMAXP7_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRL7 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRL7_CLRDT 0x00000080 // Clear Data Toggle
|
|
#define USB_RXCSRL7_STALLED 0x00000040 // Endpoint Stalled
|
|
#define USB_RXCSRL7_REQPKT 0x00000020 // Request Packet
|
|
#define USB_RXCSRL7_STALL 0x00000020 // Send STALL
|
|
#define USB_RXCSRL7_FLUSH 0x00000010 // Flush FIFO
|
|
#define USB_RXCSRL7_DATAERR 0x00000008 // Data Error
|
|
#define USB_RXCSRL7_NAKTO 0x00000008 // NAK Timeout
|
|
#define USB_RXCSRL7_ERROR 0x00000004 // Error
|
|
#define USB_RXCSRL7_OVER 0x00000004 // Overrun
|
|
#define USB_RXCSRL7_FULL 0x00000002 // FIFO Full
|
|
#define USB_RXCSRL7_RXRDY 0x00000001 // Receive Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRH7 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRH7_AUTOCL 0x00000080 // Auto Clear
|
|
#define USB_RXCSRH7_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_RXCSRH7_AUTORQ 0x00000040 // Auto Request
|
|
#define USB_RXCSRH7_DMAEN 0x00000020 // DMA Request Enable
|
|
#define USB_RXCSRH7_PIDERR 0x00000010 // PID Error
|
|
#define USB_RXCSRH7_DISNYET 0x00000010 // Disable NYET
|
|
#define USB_RXCSRH7_DMAMOD 0x00000008 // DMA Request Mode
|
|
#define USB_RXCSRH7_DTWE 0x00000004 // Data Toggle Write Enable
|
|
#define USB_RXCSRH7_DT 0x00000002 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCOUNT7 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCOUNT7_COUNT_M 0x00001FFF // Receive Packet Count
|
|
#define USB_RXCOUNT7_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXTYPE7 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXTYPE7_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_TXTYPE7_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_TXTYPE7_SPEED_FULL 0x00000080 // Full
|
|
#define USB_TXTYPE7_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_TXTYPE7_PROTO_M 0x00000030 // Protocol
|
|
#define USB_TXTYPE7_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_TXTYPE7_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_TXTYPE7_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_TXTYPE7_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_TXTYPE7_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_TXTYPE7_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXINTERVAL7
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXINTERVAL7_TXPOLL_M \
|
|
0x000000FF // TX Polling
|
|
#define USB_TXINTERVAL7_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_TXINTERVAL7_NAKLMT_S \
|
|
0
|
|
#define USB_TXINTERVAL7_TXPOLL_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXTYPE7 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXTYPE7_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_RXTYPE7_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_RXTYPE7_SPEED_FULL 0x00000080 // Full
|
|
#define USB_RXTYPE7_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_RXTYPE7_PROTO_M 0x00000030 // Protocol
|
|
#define USB_RXTYPE7_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_RXTYPE7_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_RXTYPE7_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_RXTYPE7_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_RXTYPE7_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_RXTYPE7_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXINTERVAL7
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXINTERVAL7_TXPOLL_M \
|
|
0x000000FF // RX Polling
|
|
#define USB_RXINTERVAL7_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_RXINTERVAL7_NAKLMT_S \
|
|
0
|
|
#define USB_RXINTERVAL7_TXPOLL_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXMAXP8 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXMAXP8_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_TXMAXP8_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRL8 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRL8_NAKTO 0x00000080 // NAK Timeout
|
|
#define USB_TXCSRL8_CLRDT 0x00000040 // Clear Data Toggle
|
|
#define USB_TXCSRL8_STALLED 0x00000020 // Endpoint Stalled
|
|
#define USB_TXCSRL8_STALL 0x00000010 // Send STALL
|
|
#define USB_TXCSRL8_SETUP 0x00000010 // Setup Packet
|
|
#define USB_TXCSRL8_FLUSH 0x00000008 // Flush FIFO
|
|
#define USB_TXCSRL8_ERROR 0x00000004 // Error
|
|
#define USB_TXCSRL8_UNDRN 0x00000004 // Underrun
|
|
#define USB_TXCSRL8_FIFONE 0x00000002 // FIFO Not Empty
|
|
#define USB_TXCSRL8_TXRDY 0x00000001 // Transmit Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRH8 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRH8_AUTOSET 0x00000080 // Auto Set
|
|
#define USB_TXCSRH8_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_TXCSRH8_MODE 0x00000020 // Mode
|
|
#define USB_TXCSRH8_DMAEN 0x00000010 // DMA Request Enable
|
|
#define USB_TXCSRH8_FDT 0x00000008 // Force Data Toggle
|
|
#define USB_TXCSRH8_DMAMOD 0x00000004 // DMA Request Mode
|
|
#define USB_TXCSRH8_DTWE 0x00000002 // Data Toggle Write Enable
|
|
#define USB_TXCSRH8_DT 0x00000001 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXMAXP8 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXMAXP8_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_RXMAXP8_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRL8 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRL8_CLRDT 0x00000080 // Clear Data Toggle
|
|
#define USB_RXCSRL8_STALLED 0x00000040 // Endpoint Stalled
|
|
#define USB_RXCSRL8_STALL 0x00000020 // Send STALL
|
|
#define USB_RXCSRL8_REQPKT 0x00000020 // Request Packet
|
|
#define USB_RXCSRL8_FLUSH 0x00000010 // Flush FIFO
|
|
#define USB_RXCSRL8_NAKTO 0x00000008 // NAK Timeout
|
|
#define USB_RXCSRL8_DATAERR 0x00000008 // Data Error
|
|
#define USB_RXCSRL8_OVER 0x00000004 // Overrun
|
|
#define USB_RXCSRL8_ERROR 0x00000004 // Error
|
|
#define USB_RXCSRL8_FULL 0x00000002 // FIFO Full
|
|
#define USB_RXCSRL8_RXRDY 0x00000001 // Receive Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRH8 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRH8_AUTOCL 0x00000080 // Auto Clear
|
|
#define USB_RXCSRH8_AUTORQ 0x00000040 // Auto Request
|
|
#define USB_RXCSRH8_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_RXCSRH8_DMAEN 0x00000020 // DMA Request Enable
|
|
#define USB_RXCSRH8_DISNYET 0x00000010 // Disable NYET
|
|
#define USB_RXCSRH8_PIDERR 0x00000010 // PID Error
|
|
#define USB_RXCSRH8_DMAMOD 0x00000008 // DMA Request Mode
|
|
#define USB_RXCSRH8_DTWE 0x00000004 // Data Toggle Write Enable
|
|
#define USB_RXCSRH8_DT 0x00000002 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCOUNT8 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCOUNT8_COUNT_M 0x00001FFF // Receive Packet Count
|
|
#define USB_RXCOUNT8_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXTYPE8 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXTYPE8_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_TXTYPE8_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_TXTYPE8_SPEED_FULL 0x00000080 // Full
|
|
#define USB_TXTYPE8_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_TXTYPE8_PROTO_M 0x00000030 // Protocol
|
|
#define USB_TXTYPE8_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_TXTYPE8_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_TXTYPE8_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_TXTYPE8_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_TXTYPE8_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_TXTYPE8_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXINTERVAL8
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXINTERVAL8_TXPOLL_M \
|
|
0x000000FF // TX Polling
|
|
#define USB_TXINTERVAL8_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_TXINTERVAL8_NAKLMT_S \
|
|
0
|
|
#define USB_TXINTERVAL8_TXPOLL_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXTYPE8 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXTYPE8_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_RXTYPE8_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_RXTYPE8_SPEED_FULL 0x00000080 // Full
|
|
#define USB_RXTYPE8_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_RXTYPE8_PROTO_M 0x00000030 // Protocol
|
|
#define USB_RXTYPE8_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_RXTYPE8_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_RXTYPE8_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_RXTYPE8_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_RXTYPE8_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_RXTYPE8_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXINTERVAL8
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXINTERVAL8_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_RXINTERVAL8_TXPOLL_M \
|
|
0x000000FF // RX Polling
|
|
#define USB_RXINTERVAL8_NAKLMT_S \
|
|
0
|
|
#define USB_RXINTERVAL8_TXPOLL_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXMAXP9 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXMAXP9_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_TXMAXP9_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRL9 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRL9_NAKTO 0x00000080 // NAK Timeout
|
|
#define USB_TXCSRL9_CLRDT 0x00000040 // Clear Data Toggle
|
|
#define USB_TXCSRL9_STALLED 0x00000020 // Endpoint Stalled
|
|
#define USB_TXCSRL9_SETUP 0x00000010 // Setup Packet
|
|
#define USB_TXCSRL9_STALL 0x00000010 // Send STALL
|
|
#define USB_TXCSRL9_FLUSH 0x00000008 // Flush FIFO
|
|
#define USB_TXCSRL9_ERROR 0x00000004 // Error
|
|
#define USB_TXCSRL9_UNDRN 0x00000004 // Underrun
|
|
#define USB_TXCSRL9_FIFONE 0x00000002 // FIFO Not Empty
|
|
#define USB_TXCSRL9_TXRDY 0x00000001 // Transmit Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRH9 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRH9_AUTOSET 0x00000080 // Auto Set
|
|
#define USB_TXCSRH9_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_TXCSRH9_MODE 0x00000020 // Mode
|
|
#define USB_TXCSRH9_DMAEN 0x00000010 // DMA Request Enable
|
|
#define USB_TXCSRH9_FDT 0x00000008 // Force Data Toggle
|
|
#define USB_TXCSRH9_DMAMOD 0x00000004 // DMA Request Mode
|
|
#define USB_TXCSRH9_DTWE 0x00000002 // Data Toggle Write Enable
|
|
#define USB_TXCSRH9_DT 0x00000001 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXMAXP9 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXMAXP9_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_RXMAXP9_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRL9 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRL9_CLRDT 0x00000080 // Clear Data Toggle
|
|
#define USB_RXCSRL9_STALLED 0x00000040 // Endpoint Stalled
|
|
#define USB_RXCSRL9_STALL 0x00000020 // Send STALL
|
|
#define USB_RXCSRL9_REQPKT 0x00000020 // Request Packet
|
|
#define USB_RXCSRL9_FLUSH 0x00000010 // Flush FIFO
|
|
#define USB_RXCSRL9_DATAERR 0x00000008 // Data Error
|
|
#define USB_RXCSRL9_NAKTO 0x00000008 // NAK Timeout
|
|
#define USB_RXCSRL9_ERROR 0x00000004 // Error
|
|
#define USB_RXCSRL9_OVER 0x00000004 // Overrun
|
|
#define USB_RXCSRL9_FULL 0x00000002 // FIFO Full
|
|
#define USB_RXCSRL9_RXRDY 0x00000001 // Receive Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRH9 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRH9_AUTOCL 0x00000080 // Auto Clear
|
|
#define USB_RXCSRH9_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_RXCSRH9_AUTORQ 0x00000040 // Auto Request
|
|
#define USB_RXCSRH9_DMAEN 0x00000020 // DMA Request Enable
|
|
#define USB_RXCSRH9_PIDERR 0x00000010 // PID Error
|
|
#define USB_RXCSRH9_DISNYET 0x00000010 // Disable NYET
|
|
#define USB_RXCSRH9_DMAMOD 0x00000008 // DMA Request Mode
|
|
#define USB_RXCSRH9_DTWE 0x00000004 // Data Toggle Write Enable
|
|
#define USB_RXCSRH9_DT 0x00000002 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCOUNT9 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCOUNT9_COUNT_M 0x00001FFF // Receive Packet Count
|
|
#define USB_RXCOUNT9_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXTYPE9 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXTYPE9_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_TXTYPE9_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_TXTYPE9_SPEED_FULL 0x00000080 // Full
|
|
#define USB_TXTYPE9_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_TXTYPE9_PROTO_M 0x00000030 // Protocol
|
|
#define USB_TXTYPE9_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_TXTYPE9_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_TXTYPE9_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_TXTYPE9_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_TXTYPE9_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_TXTYPE9_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXINTERVAL9
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXINTERVAL9_TXPOLL_M \
|
|
0x000000FF // TX Polling
|
|
#define USB_TXINTERVAL9_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_TXINTERVAL9_TXPOLL_S \
|
|
0
|
|
#define USB_TXINTERVAL9_NAKLMT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXTYPE9 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXTYPE9_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_RXTYPE9_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_RXTYPE9_SPEED_FULL 0x00000080 // Full
|
|
#define USB_RXTYPE9_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_RXTYPE9_PROTO_M 0x00000030 // Protocol
|
|
#define USB_RXTYPE9_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_RXTYPE9_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_RXTYPE9_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_RXTYPE9_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_RXTYPE9_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_RXTYPE9_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXINTERVAL9
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXINTERVAL9_TXPOLL_M \
|
|
0x000000FF // RX Polling
|
|
#define USB_RXINTERVAL9_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_RXINTERVAL9_NAKLMT_S \
|
|
0
|
|
#define USB_RXINTERVAL9_TXPOLL_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXMAXP10 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXMAXP10_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_TXMAXP10_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRL10 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRL10_NAKTO 0x00000080 // NAK Timeout
|
|
#define USB_TXCSRL10_CLRDT 0x00000040 // Clear Data Toggle
|
|
#define USB_TXCSRL10_STALLED 0x00000020 // Endpoint Stalled
|
|
#define USB_TXCSRL10_SETUP 0x00000010 // Setup Packet
|
|
#define USB_TXCSRL10_STALL 0x00000010 // Send STALL
|
|
#define USB_TXCSRL10_FLUSH 0x00000008 // Flush FIFO
|
|
#define USB_TXCSRL10_UNDRN 0x00000004 // Underrun
|
|
#define USB_TXCSRL10_ERROR 0x00000004 // Error
|
|
#define USB_TXCSRL10_FIFONE 0x00000002 // FIFO Not Empty
|
|
#define USB_TXCSRL10_TXRDY 0x00000001 // Transmit Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRH10 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRH10_AUTOSET 0x00000080 // Auto Set
|
|
#define USB_TXCSRH10_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_TXCSRH10_MODE 0x00000020 // Mode
|
|
#define USB_TXCSRH10_DMAEN 0x00000010 // DMA Request Enable
|
|
#define USB_TXCSRH10_FDT 0x00000008 // Force Data Toggle
|
|
#define USB_TXCSRH10_DMAMOD 0x00000004 // DMA Request Mode
|
|
#define USB_TXCSRH10_DTWE 0x00000002 // Data Toggle Write Enable
|
|
#define USB_TXCSRH10_DT 0x00000001 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXMAXP10 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXMAXP10_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_RXMAXP10_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRL10 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRL10_CLRDT 0x00000080 // Clear Data Toggle
|
|
#define USB_RXCSRL10_STALLED 0x00000040 // Endpoint Stalled
|
|
#define USB_RXCSRL10_STALL 0x00000020 // Send STALL
|
|
#define USB_RXCSRL10_REQPKT 0x00000020 // Request Packet
|
|
#define USB_RXCSRL10_FLUSH 0x00000010 // Flush FIFO
|
|
#define USB_RXCSRL10_NAKTO 0x00000008 // NAK Timeout
|
|
#define USB_RXCSRL10_DATAERR 0x00000008 // Data Error
|
|
#define USB_RXCSRL10_OVER 0x00000004 // Overrun
|
|
#define USB_RXCSRL10_ERROR 0x00000004 // Error
|
|
#define USB_RXCSRL10_FULL 0x00000002 // FIFO Full
|
|
#define USB_RXCSRL10_RXRDY 0x00000001 // Receive Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRH10 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRH10_AUTOCL 0x00000080 // Auto Clear
|
|
#define USB_RXCSRH10_AUTORQ 0x00000040 // Auto Request
|
|
#define USB_RXCSRH10_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_RXCSRH10_DMAEN 0x00000020 // DMA Request Enable
|
|
#define USB_RXCSRH10_PIDERR 0x00000010 // PID Error
|
|
#define USB_RXCSRH10_DISNYET 0x00000010 // Disable NYET
|
|
#define USB_RXCSRH10_DMAMOD 0x00000008 // DMA Request Mode
|
|
#define USB_RXCSRH10_DTWE 0x00000004 // Data Toggle Write Enable
|
|
#define USB_RXCSRH10_DT 0x00000002 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCOUNT10
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCOUNT10_COUNT_M 0x00001FFF // Receive Packet Count
|
|
#define USB_RXCOUNT10_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXTYPE10 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXTYPE10_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_TXTYPE10_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_TXTYPE10_SPEED_FULL 0x00000080 // Full
|
|
#define USB_TXTYPE10_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_TXTYPE10_PROTO_M 0x00000030 // Protocol
|
|
#define USB_TXTYPE10_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_TXTYPE10_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_TXTYPE10_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_TXTYPE10_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_TXTYPE10_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_TXTYPE10_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXINTERVAL10
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXINTERVAL10_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_TXINTERVAL10_TXPOLL_M \
|
|
0x000000FF // TX Polling
|
|
#define USB_TXINTERVAL10_TXPOLL_S \
|
|
0
|
|
#define USB_TXINTERVAL10_NAKLMT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXTYPE10 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXTYPE10_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_RXTYPE10_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_RXTYPE10_SPEED_FULL 0x00000080 // Full
|
|
#define USB_RXTYPE10_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_RXTYPE10_PROTO_M 0x00000030 // Protocol
|
|
#define USB_RXTYPE10_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_RXTYPE10_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_RXTYPE10_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_RXTYPE10_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_RXTYPE10_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_RXTYPE10_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXINTERVAL10
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXINTERVAL10_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_RXINTERVAL10_TXPOLL_M \
|
|
0x000000FF // RX Polling
|
|
#define USB_RXINTERVAL10_TXPOLL_S \
|
|
0
|
|
#define USB_RXINTERVAL10_NAKLMT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXMAXP11 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXMAXP11_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_TXMAXP11_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRL11 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRL11_NAKTO 0x00000080 // NAK Timeout
|
|
#define USB_TXCSRL11_CLRDT 0x00000040 // Clear Data Toggle
|
|
#define USB_TXCSRL11_STALLED 0x00000020 // Endpoint Stalled
|
|
#define USB_TXCSRL11_STALL 0x00000010 // Send STALL
|
|
#define USB_TXCSRL11_SETUP 0x00000010 // Setup Packet
|
|
#define USB_TXCSRL11_FLUSH 0x00000008 // Flush FIFO
|
|
#define USB_TXCSRL11_ERROR 0x00000004 // Error
|
|
#define USB_TXCSRL11_UNDRN 0x00000004 // Underrun
|
|
#define USB_TXCSRL11_FIFONE 0x00000002 // FIFO Not Empty
|
|
#define USB_TXCSRL11_TXRDY 0x00000001 // Transmit Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRH11 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRH11_AUTOSET 0x00000080 // Auto Set
|
|
#define USB_TXCSRH11_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_TXCSRH11_MODE 0x00000020 // Mode
|
|
#define USB_TXCSRH11_DMAEN 0x00000010 // DMA Request Enable
|
|
#define USB_TXCSRH11_FDT 0x00000008 // Force Data Toggle
|
|
#define USB_TXCSRH11_DMAMOD 0x00000004 // DMA Request Mode
|
|
#define USB_TXCSRH11_DTWE 0x00000002 // Data Toggle Write Enable
|
|
#define USB_TXCSRH11_DT 0x00000001 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXMAXP11 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXMAXP11_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_RXMAXP11_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRL11 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRL11_CLRDT 0x00000080 // Clear Data Toggle
|
|
#define USB_RXCSRL11_STALLED 0x00000040 // Endpoint Stalled
|
|
#define USB_RXCSRL11_STALL 0x00000020 // Send STALL
|
|
#define USB_RXCSRL11_REQPKT 0x00000020 // Request Packet
|
|
#define USB_RXCSRL11_FLUSH 0x00000010 // Flush FIFO
|
|
#define USB_RXCSRL11_DATAERR 0x00000008 // Data Error
|
|
#define USB_RXCSRL11_NAKTO 0x00000008 // NAK Timeout
|
|
#define USB_RXCSRL11_OVER 0x00000004 // Overrun
|
|
#define USB_RXCSRL11_ERROR 0x00000004 // Error
|
|
#define USB_RXCSRL11_FULL 0x00000002 // FIFO Full
|
|
#define USB_RXCSRL11_RXRDY 0x00000001 // Receive Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRH11 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRH11_AUTOCL 0x00000080 // Auto Clear
|
|
#define USB_RXCSRH11_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_RXCSRH11_AUTORQ 0x00000040 // Auto Request
|
|
#define USB_RXCSRH11_DMAEN 0x00000020 // DMA Request Enable
|
|
#define USB_RXCSRH11_DISNYET 0x00000010 // Disable NYET
|
|
#define USB_RXCSRH11_PIDERR 0x00000010 // PID Error
|
|
#define USB_RXCSRH11_DMAMOD 0x00000008 // DMA Request Mode
|
|
#define USB_RXCSRH11_DTWE 0x00000004 // Data Toggle Write Enable
|
|
#define USB_RXCSRH11_DT 0x00000002 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCOUNT11
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCOUNT11_COUNT_M 0x00001FFF // Receive Packet Count
|
|
#define USB_RXCOUNT11_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXTYPE11 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXTYPE11_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_TXTYPE11_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_TXTYPE11_SPEED_FULL 0x00000080 // Full
|
|
#define USB_TXTYPE11_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_TXTYPE11_PROTO_M 0x00000030 // Protocol
|
|
#define USB_TXTYPE11_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_TXTYPE11_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_TXTYPE11_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_TXTYPE11_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_TXTYPE11_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_TXTYPE11_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXINTERVAL11
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXINTERVAL11_TXPOLL_M \
|
|
0x000000FF // TX Polling
|
|
#define USB_TXINTERVAL11_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_TXINTERVAL11_NAKLMT_S \
|
|
0
|
|
#define USB_TXINTERVAL11_TXPOLL_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXTYPE11 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXTYPE11_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_RXTYPE11_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_RXTYPE11_SPEED_FULL 0x00000080 // Full
|
|
#define USB_RXTYPE11_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_RXTYPE11_PROTO_M 0x00000030 // Protocol
|
|
#define USB_RXTYPE11_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_RXTYPE11_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_RXTYPE11_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_RXTYPE11_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_RXTYPE11_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_RXTYPE11_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXINTERVAL11
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXINTERVAL11_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_RXINTERVAL11_TXPOLL_M \
|
|
0x000000FF // RX Polling
|
|
#define USB_RXINTERVAL11_TXPOLL_S \
|
|
0
|
|
#define USB_RXINTERVAL11_NAKLMT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXMAXP12 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXMAXP12_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_TXMAXP12_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRL12 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRL12_NAKTO 0x00000080 // NAK Timeout
|
|
#define USB_TXCSRL12_CLRDT 0x00000040 // Clear Data Toggle
|
|
#define USB_TXCSRL12_STALLED 0x00000020 // Endpoint Stalled
|
|
#define USB_TXCSRL12_SETUP 0x00000010 // Setup Packet
|
|
#define USB_TXCSRL12_STALL 0x00000010 // Send STALL
|
|
#define USB_TXCSRL12_FLUSH 0x00000008 // Flush FIFO
|
|
#define USB_TXCSRL12_UNDRN 0x00000004 // Underrun
|
|
#define USB_TXCSRL12_ERROR 0x00000004 // Error
|
|
#define USB_TXCSRL12_FIFONE 0x00000002 // FIFO Not Empty
|
|
#define USB_TXCSRL12_TXRDY 0x00000001 // Transmit Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRH12 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRH12_AUTOSET 0x00000080 // Auto Set
|
|
#define USB_TXCSRH12_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_TXCSRH12_MODE 0x00000020 // Mode
|
|
#define USB_TXCSRH12_DMAEN 0x00000010 // DMA Request Enable
|
|
#define USB_TXCSRH12_FDT 0x00000008 // Force Data Toggle
|
|
#define USB_TXCSRH12_DMAMOD 0x00000004 // DMA Request Mode
|
|
#define USB_TXCSRH12_DTWE 0x00000002 // Data Toggle Write Enable
|
|
#define USB_TXCSRH12_DT 0x00000001 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXMAXP12 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXMAXP12_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_RXMAXP12_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRL12 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRL12_CLRDT 0x00000080 // Clear Data Toggle
|
|
#define USB_RXCSRL12_STALLED 0x00000040 // Endpoint Stalled
|
|
#define USB_RXCSRL12_STALL 0x00000020 // Send STALL
|
|
#define USB_RXCSRL12_REQPKT 0x00000020 // Request Packet
|
|
#define USB_RXCSRL12_FLUSH 0x00000010 // Flush FIFO
|
|
#define USB_RXCSRL12_NAKTO 0x00000008 // NAK Timeout
|
|
#define USB_RXCSRL12_DATAERR 0x00000008 // Data Error
|
|
#define USB_RXCSRL12_ERROR 0x00000004 // Error
|
|
#define USB_RXCSRL12_OVER 0x00000004 // Overrun
|
|
#define USB_RXCSRL12_FULL 0x00000002 // FIFO Full
|
|
#define USB_RXCSRL12_RXRDY 0x00000001 // Receive Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRH12 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRH12_AUTOCL 0x00000080 // Auto Clear
|
|
#define USB_RXCSRH12_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_RXCSRH12_AUTORQ 0x00000040 // Auto Request
|
|
#define USB_RXCSRH12_DMAEN 0x00000020 // DMA Request Enable
|
|
#define USB_RXCSRH12_PIDERR 0x00000010 // PID Error
|
|
#define USB_RXCSRH12_DISNYET 0x00000010 // Disable NYET
|
|
#define USB_RXCSRH12_DMAMOD 0x00000008 // DMA Request Mode
|
|
#define USB_RXCSRH12_DTWE 0x00000004 // Data Toggle Write Enable
|
|
#define USB_RXCSRH12_DT 0x00000002 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCOUNT12
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCOUNT12_COUNT_M 0x00001FFF // Receive Packet Count
|
|
#define USB_RXCOUNT12_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXTYPE12 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXTYPE12_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_TXTYPE12_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_TXTYPE12_SPEED_FULL 0x00000080 // Full
|
|
#define USB_TXTYPE12_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_TXTYPE12_PROTO_M 0x00000030 // Protocol
|
|
#define USB_TXTYPE12_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_TXTYPE12_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_TXTYPE12_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_TXTYPE12_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_TXTYPE12_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_TXTYPE12_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXINTERVAL12
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXINTERVAL12_TXPOLL_M \
|
|
0x000000FF // TX Polling
|
|
#define USB_TXINTERVAL12_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_TXINTERVAL12_TXPOLL_S \
|
|
0
|
|
#define USB_TXINTERVAL12_NAKLMT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXTYPE12 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXTYPE12_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_RXTYPE12_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_RXTYPE12_SPEED_FULL 0x00000080 // Full
|
|
#define USB_RXTYPE12_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_RXTYPE12_PROTO_M 0x00000030 // Protocol
|
|
#define USB_RXTYPE12_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_RXTYPE12_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_RXTYPE12_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_RXTYPE12_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_RXTYPE12_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_RXTYPE12_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXINTERVAL12
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXINTERVAL12_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_RXINTERVAL12_TXPOLL_M \
|
|
0x000000FF // RX Polling
|
|
#define USB_RXINTERVAL12_NAKLMT_S \
|
|
0
|
|
#define USB_RXINTERVAL12_TXPOLL_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXMAXP13 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXMAXP13_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_TXMAXP13_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRL13 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRL13_NAKTO 0x00000080 // NAK Timeout
|
|
#define USB_TXCSRL13_CLRDT 0x00000040 // Clear Data Toggle
|
|
#define USB_TXCSRL13_STALLED 0x00000020 // Endpoint Stalled
|
|
#define USB_TXCSRL13_SETUP 0x00000010 // Setup Packet
|
|
#define USB_TXCSRL13_STALL 0x00000010 // Send STALL
|
|
#define USB_TXCSRL13_FLUSH 0x00000008 // Flush FIFO
|
|
#define USB_TXCSRL13_UNDRN 0x00000004 // Underrun
|
|
#define USB_TXCSRL13_ERROR 0x00000004 // Error
|
|
#define USB_TXCSRL13_FIFONE 0x00000002 // FIFO Not Empty
|
|
#define USB_TXCSRL13_TXRDY 0x00000001 // Transmit Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRH13 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRH13_AUTOSET 0x00000080 // Auto Set
|
|
#define USB_TXCSRH13_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_TXCSRH13_MODE 0x00000020 // Mode
|
|
#define USB_TXCSRH13_DMAEN 0x00000010 // DMA Request Enable
|
|
#define USB_TXCSRH13_FDT 0x00000008 // Force Data Toggle
|
|
#define USB_TXCSRH13_DMAMOD 0x00000004 // DMA Request Mode
|
|
#define USB_TXCSRH13_DTWE 0x00000002 // Data Toggle Write Enable
|
|
#define USB_TXCSRH13_DT 0x00000001 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXMAXP13 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXMAXP13_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_RXMAXP13_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRL13 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRL13_CLRDT 0x00000080 // Clear Data Toggle
|
|
#define USB_RXCSRL13_STALLED 0x00000040 // Endpoint Stalled
|
|
#define USB_RXCSRL13_REQPKT 0x00000020 // Request Packet
|
|
#define USB_RXCSRL13_STALL 0x00000020 // Send STALL
|
|
#define USB_RXCSRL13_FLUSH 0x00000010 // Flush FIFO
|
|
#define USB_RXCSRL13_NAKTO 0x00000008 // NAK Timeout
|
|
#define USB_RXCSRL13_DATAERR 0x00000008 // Data Error
|
|
#define USB_RXCSRL13_OVER 0x00000004 // Overrun
|
|
#define USB_RXCSRL13_ERROR 0x00000004 // Error
|
|
#define USB_RXCSRL13_FULL 0x00000002 // FIFO Full
|
|
#define USB_RXCSRL13_RXRDY 0x00000001 // Receive Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRH13 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRH13_AUTOCL 0x00000080 // Auto Clear
|
|
#define USB_RXCSRH13_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_RXCSRH13_AUTORQ 0x00000040 // Auto Request
|
|
#define USB_RXCSRH13_DMAEN 0x00000020 // DMA Request Enable
|
|
#define USB_RXCSRH13_DISNYET 0x00000010 // Disable NYET
|
|
#define USB_RXCSRH13_PIDERR 0x00000010 // PID Error
|
|
#define USB_RXCSRH13_DMAMOD 0x00000008 // DMA Request Mode
|
|
#define USB_RXCSRH13_DTWE 0x00000004 // Data Toggle Write Enable
|
|
#define USB_RXCSRH13_DT 0x00000002 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCOUNT13
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCOUNT13_COUNT_M 0x00001FFF // Receive Packet Count
|
|
#define USB_RXCOUNT13_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXTYPE13 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXTYPE13_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_TXTYPE13_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_TXTYPE13_SPEED_FULL 0x00000080 // Full
|
|
#define USB_TXTYPE13_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_TXTYPE13_PROTO_M 0x00000030 // Protocol
|
|
#define USB_TXTYPE13_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_TXTYPE13_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_TXTYPE13_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_TXTYPE13_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_TXTYPE13_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_TXTYPE13_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXINTERVAL13
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXINTERVAL13_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_TXINTERVAL13_TXPOLL_M \
|
|
0x000000FF // TX Polling
|
|
#define USB_TXINTERVAL13_TXPOLL_S \
|
|
0
|
|
#define USB_TXINTERVAL13_NAKLMT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXTYPE13 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXTYPE13_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_RXTYPE13_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_RXTYPE13_SPEED_FULL 0x00000080 // Full
|
|
#define USB_RXTYPE13_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_RXTYPE13_PROTO_M 0x00000030 // Protocol
|
|
#define USB_RXTYPE13_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_RXTYPE13_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_RXTYPE13_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_RXTYPE13_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_RXTYPE13_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_RXTYPE13_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXINTERVAL13
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXINTERVAL13_TXPOLL_M \
|
|
0x000000FF // RX Polling
|
|
#define USB_RXINTERVAL13_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_RXINTERVAL13_TXPOLL_S \
|
|
0
|
|
#define USB_RXINTERVAL13_NAKLMT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXMAXP14 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXMAXP14_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_TXMAXP14_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRL14 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRL14_NAKTO 0x00000080 // NAK Timeout
|
|
#define USB_TXCSRL14_CLRDT 0x00000040 // Clear Data Toggle
|
|
#define USB_TXCSRL14_STALLED 0x00000020 // Endpoint Stalled
|
|
#define USB_TXCSRL14_STALL 0x00000010 // Send STALL
|
|
#define USB_TXCSRL14_SETUP 0x00000010 // Setup Packet
|
|
#define USB_TXCSRL14_FLUSH 0x00000008 // Flush FIFO
|
|
#define USB_TXCSRL14_ERROR 0x00000004 // Error
|
|
#define USB_TXCSRL14_UNDRN 0x00000004 // Underrun
|
|
#define USB_TXCSRL14_FIFONE 0x00000002 // FIFO Not Empty
|
|
#define USB_TXCSRL14_TXRDY 0x00000001 // Transmit Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRH14 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRH14_AUTOSET 0x00000080 // Auto Set
|
|
#define USB_TXCSRH14_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_TXCSRH14_MODE 0x00000020 // Mode
|
|
#define USB_TXCSRH14_DMAEN 0x00000010 // DMA Request Enable
|
|
#define USB_TXCSRH14_FDT 0x00000008 // Force Data Toggle
|
|
#define USB_TXCSRH14_DMAMOD 0x00000004 // DMA Request Mode
|
|
#define USB_TXCSRH14_DTWE 0x00000002 // Data Toggle Write Enable
|
|
#define USB_TXCSRH14_DT 0x00000001 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXMAXP14 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXMAXP14_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_RXMAXP14_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRL14 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRL14_CLRDT 0x00000080 // Clear Data Toggle
|
|
#define USB_RXCSRL14_STALLED 0x00000040 // Endpoint Stalled
|
|
#define USB_RXCSRL14_REQPKT 0x00000020 // Request Packet
|
|
#define USB_RXCSRL14_STALL 0x00000020 // Send STALL
|
|
#define USB_RXCSRL14_FLUSH 0x00000010 // Flush FIFO
|
|
#define USB_RXCSRL14_DATAERR 0x00000008 // Data Error
|
|
#define USB_RXCSRL14_NAKTO 0x00000008 // NAK Timeout
|
|
#define USB_RXCSRL14_OVER 0x00000004 // Overrun
|
|
#define USB_RXCSRL14_ERROR 0x00000004 // Error
|
|
#define USB_RXCSRL14_FULL 0x00000002 // FIFO Full
|
|
#define USB_RXCSRL14_RXRDY 0x00000001 // Receive Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRH14 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRH14_AUTOCL 0x00000080 // Auto Clear
|
|
#define USB_RXCSRH14_AUTORQ 0x00000040 // Auto Request
|
|
#define USB_RXCSRH14_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_RXCSRH14_DMAEN 0x00000020 // DMA Request Enable
|
|
#define USB_RXCSRH14_PIDERR 0x00000010 // PID Error
|
|
#define USB_RXCSRH14_DISNYET 0x00000010 // Disable NYET
|
|
#define USB_RXCSRH14_DMAMOD 0x00000008 // DMA Request Mode
|
|
#define USB_RXCSRH14_DTWE 0x00000004 // Data Toggle Write Enable
|
|
#define USB_RXCSRH14_DT 0x00000002 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCOUNT14
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCOUNT14_COUNT_M 0x00001FFF // Receive Packet Count
|
|
#define USB_RXCOUNT14_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXTYPE14 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXTYPE14_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_TXTYPE14_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_TXTYPE14_SPEED_FULL 0x00000080 // Full
|
|
#define USB_TXTYPE14_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_TXTYPE14_PROTO_M 0x00000030 // Protocol
|
|
#define USB_TXTYPE14_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_TXTYPE14_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_TXTYPE14_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_TXTYPE14_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_TXTYPE14_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_TXTYPE14_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXINTERVAL14
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXINTERVAL14_TXPOLL_M \
|
|
0x000000FF // TX Polling
|
|
#define USB_TXINTERVAL14_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_TXINTERVAL14_TXPOLL_S \
|
|
0
|
|
#define USB_TXINTERVAL14_NAKLMT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXTYPE14 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXTYPE14_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_RXTYPE14_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_RXTYPE14_SPEED_FULL 0x00000080 // Full
|
|
#define USB_RXTYPE14_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_RXTYPE14_PROTO_M 0x00000030 // Protocol
|
|
#define USB_RXTYPE14_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_RXTYPE14_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_RXTYPE14_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_RXTYPE14_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_RXTYPE14_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_RXTYPE14_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXINTERVAL14
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXINTERVAL14_TXPOLL_M \
|
|
0x000000FF // RX Polling
|
|
#define USB_RXINTERVAL14_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_RXINTERVAL14_TXPOLL_S \
|
|
0
|
|
#define USB_RXINTERVAL14_NAKLMT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXMAXP15 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXMAXP15_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_TXMAXP15_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRL15 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRL15_NAKTO 0x00000080 // NAK Timeout
|
|
#define USB_TXCSRL15_CLRDT 0x00000040 // Clear Data Toggle
|
|
#define USB_TXCSRL15_STALLED 0x00000020 // Endpoint Stalled
|
|
#define USB_TXCSRL15_SETUP 0x00000010 // Setup Packet
|
|
#define USB_TXCSRL15_STALL 0x00000010 // Send STALL
|
|
#define USB_TXCSRL15_FLUSH 0x00000008 // Flush FIFO
|
|
#define USB_TXCSRL15_UNDRN 0x00000004 // Underrun
|
|
#define USB_TXCSRL15_ERROR 0x00000004 // Error
|
|
#define USB_TXCSRL15_FIFONE 0x00000002 // FIFO Not Empty
|
|
#define USB_TXCSRL15_TXRDY 0x00000001 // Transmit Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXCSRH15 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXCSRH15_AUTOSET 0x00000080 // Auto Set
|
|
#define USB_TXCSRH15_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_TXCSRH15_MODE 0x00000020 // Mode
|
|
#define USB_TXCSRH15_DMAEN 0x00000010 // DMA Request Enable
|
|
#define USB_TXCSRH15_FDT 0x00000008 // Force Data Toggle
|
|
#define USB_TXCSRH15_DMAMOD 0x00000004 // DMA Request Mode
|
|
#define USB_TXCSRH15_DTWE 0x00000002 // Data Toggle Write Enable
|
|
#define USB_TXCSRH15_DT 0x00000001 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXMAXP15 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXMAXP15_MAXLOAD_M 0x000007FF // Maximum Payload
|
|
#define USB_RXMAXP15_MAXLOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRL15 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRL15_CLRDT 0x00000080 // Clear Data Toggle
|
|
#define USB_RXCSRL15_STALLED 0x00000040 // Endpoint Stalled
|
|
#define USB_RXCSRL15_STALL 0x00000020 // Send STALL
|
|
#define USB_RXCSRL15_REQPKT 0x00000020 // Request Packet
|
|
#define USB_RXCSRL15_FLUSH 0x00000010 // Flush FIFO
|
|
#define USB_RXCSRL15_DATAERR 0x00000008 // Data Error
|
|
#define USB_RXCSRL15_NAKTO 0x00000008 // NAK Timeout
|
|
#define USB_RXCSRL15_ERROR 0x00000004 // Error
|
|
#define USB_RXCSRL15_OVER 0x00000004 // Overrun
|
|
#define USB_RXCSRL15_FULL 0x00000002 // FIFO Full
|
|
#define USB_RXCSRL15_RXRDY 0x00000001 // Receive Packet Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCSRH15 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCSRH15_AUTOCL 0x00000080 // Auto Clear
|
|
#define USB_RXCSRH15_AUTORQ 0x00000040 // Auto Request
|
|
#define USB_RXCSRH15_ISO 0x00000040 // Isochronous Transfers
|
|
#define USB_RXCSRH15_DMAEN 0x00000020 // DMA Request Enable
|
|
#define USB_RXCSRH15_PIDERR 0x00000010 // PID Error
|
|
#define USB_RXCSRH15_DISNYET 0x00000010 // Disable NYET
|
|
#define USB_RXCSRH15_DMAMOD 0x00000008 // DMA Request Mode
|
|
#define USB_RXCSRH15_DTWE 0x00000004 // Data Toggle Write Enable
|
|
#define USB_RXCSRH15_DT 0x00000002 // Data Toggle
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXCOUNT15
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXCOUNT15_COUNT_M 0x00001FFF // Receive Packet Count
|
|
#define USB_RXCOUNT15_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXTYPE15 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXTYPE15_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_TXTYPE15_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_TXTYPE15_SPEED_FULL 0x00000080 // Full
|
|
#define USB_TXTYPE15_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_TXTYPE15_PROTO_M 0x00000030 // Protocol
|
|
#define USB_TXTYPE15_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_TXTYPE15_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_TXTYPE15_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_TXTYPE15_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_TXTYPE15_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_TXTYPE15_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXINTERVAL15
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXINTERVAL15_TXPOLL_M \
|
|
0x000000FF // TX Polling
|
|
#define USB_TXINTERVAL15_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_TXINTERVAL15_NAKLMT_S \
|
|
0
|
|
#define USB_TXINTERVAL15_TXPOLL_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXTYPE15 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXTYPE15_SPEED_M 0x000000C0 // Operating Speed
|
|
#define USB_RXTYPE15_SPEED_DFLT 0x00000000 // Default
|
|
#define USB_RXTYPE15_SPEED_FULL 0x00000080 // Full
|
|
#define USB_RXTYPE15_SPEED_LOW 0x000000C0 // Low
|
|
#define USB_RXTYPE15_PROTO_M 0x00000030 // Protocol
|
|
#define USB_RXTYPE15_PROTO_CTRL 0x00000000 // Control
|
|
#define USB_RXTYPE15_PROTO_ISOC 0x00000010 // Isochronous
|
|
#define USB_RXTYPE15_PROTO_BULK 0x00000020 // Bulk
|
|
#define USB_RXTYPE15_PROTO_INT 0x00000030 // Interrupt
|
|
#define USB_RXTYPE15_TEP_M 0x0000000F // Target Endpoint Number
|
|
#define USB_RXTYPE15_TEP_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXINTERVAL15
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXINTERVAL15_TXPOLL_M \
|
|
0x000000FF // RX Polling
|
|
#define USB_RXINTERVAL15_NAKLMT_M \
|
|
0x000000FF // NAK Limit
|
|
#define USB_RXINTERVAL15_TXPOLL_S \
|
|
0
|
|
#define USB_RXINTERVAL15_NAKLMT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT1
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RQPKTCOUNT1_M 0x0000FFFF // Block Transfer Packet Count
|
|
#define USB_RQPKTCOUNT1_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT2
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RQPKTCOUNT2_M 0x0000FFFF // Block Transfer Packet Count
|
|
#define USB_RQPKTCOUNT2_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT3
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RQPKTCOUNT3_M 0x0000FFFF // Block Transfer Packet Count
|
|
#define USB_RQPKTCOUNT3_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT4
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RQPKTCOUNT4_COUNT_M 0x0000FFFF // Block Transfer Packet Count
|
|
#define USB_RQPKTCOUNT4_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT5
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RQPKTCOUNT5_COUNT_M 0x0000FFFF // Block Transfer Packet Count
|
|
#define USB_RQPKTCOUNT5_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT6
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RQPKTCOUNT6_COUNT_M 0x0000FFFF // Block Transfer Packet Count
|
|
#define USB_RQPKTCOUNT6_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT7
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RQPKTCOUNT7_COUNT_M 0x0000FFFF // Block Transfer Packet Count
|
|
#define USB_RQPKTCOUNT7_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT8
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RQPKTCOUNT8_COUNT_M 0x0000FFFF // Block Transfer Packet Count
|
|
#define USB_RQPKTCOUNT8_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT9
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RQPKTCOUNT9_COUNT_M 0x0000FFFF // Block Transfer Packet Count
|
|
#define USB_RQPKTCOUNT9_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT10
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RQPKTCOUNT10_COUNT_M \
|
|
0x0000FFFF // Block Transfer Packet Count
|
|
#define USB_RQPKTCOUNT10_COUNT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT11
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RQPKTCOUNT11_COUNT_M \
|
|
0x0000FFFF // Block Transfer Packet Count
|
|
#define USB_RQPKTCOUNT11_COUNT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT12
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RQPKTCOUNT12_COUNT_M \
|
|
0x0000FFFF // Block Transfer Packet Count
|
|
#define USB_RQPKTCOUNT12_COUNT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT13
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RQPKTCOUNT13_COUNT_M \
|
|
0x0000FFFF // Block Transfer Packet Count
|
|
#define USB_RQPKTCOUNT13_COUNT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT14
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RQPKTCOUNT14_COUNT_M \
|
|
0x0000FFFF // Block Transfer Packet Count
|
|
#define USB_RQPKTCOUNT14_COUNT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT15
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RQPKTCOUNT15_COUNT_M \
|
|
0x0000FFFF // Block Transfer Packet Count
|
|
#define USB_RQPKTCOUNT15_COUNT_S \
|
|
0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_RXDPKTBUFDIS
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXDPKTBUFDIS_EP15 0x00008000 // EP15 RX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_RXDPKTBUFDIS_EP14 0x00004000 // EP14 RX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_RXDPKTBUFDIS_EP13 0x00002000 // EP13 RX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_RXDPKTBUFDIS_EP12 0x00001000 // EP12 RX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_RXDPKTBUFDIS_EP11 0x00000800 // EP11 RX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_RXDPKTBUFDIS_EP10 0x00000400 // EP10 RX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_RXDPKTBUFDIS_EP9 0x00000200 // EP9 RX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_RXDPKTBUFDIS_EP8 0x00000100 // EP8 RX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_RXDPKTBUFDIS_EP7 0x00000080 // EP7 RX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_RXDPKTBUFDIS_EP6 0x00000040 // EP6 RX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_RXDPKTBUFDIS_EP5 0x00000020 // EP5 RX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_RXDPKTBUFDIS_EP4 0x00000010 // EP4 RX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_RXDPKTBUFDIS_EP3 0x00000008 // EP3 RX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_RXDPKTBUFDIS_EP2 0x00000004 // EP2 RX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_RXDPKTBUFDIS_EP1 0x00000002 // EP1 RX Double-Packet Buffer
|
|
// Disable
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_TXDPKTBUFDIS
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXDPKTBUFDIS_EP15 0x00008000 // EP15 TX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_TXDPKTBUFDIS_EP14 0x00004000 // EP14 TX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_TXDPKTBUFDIS_EP13 0x00002000 // EP13 TX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_TXDPKTBUFDIS_EP12 0x00001000 // EP12 TX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_TXDPKTBUFDIS_EP11 0x00000800 // EP11 TX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_TXDPKTBUFDIS_EP10 0x00000400 // EP10 TX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_TXDPKTBUFDIS_EP9 0x00000200 // EP9 TX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_TXDPKTBUFDIS_EP8 0x00000100 // EP8 TX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_TXDPKTBUFDIS_EP7 0x00000080 // EP7 TX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_TXDPKTBUFDIS_EP6 0x00000040 // EP6 TX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_TXDPKTBUFDIS_EP5 0x00000020 // EP5 TX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_TXDPKTBUFDIS_EP4 0x00000010 // EP4 TX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_TXDPKTBUFDIS_EP3 0x00000008 // EP3 TX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_TXDPKTBUFDIS_EP2 0x00000004 // EP2 TX Double-Packet Buffer
|
|
// Disable
|
|
#define USB_TXDPKTBUFDIS_EP1 0x00000002 // EP1 TX Double-Packet Buffer
|
|
// Disable
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_EPC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_EPC_PFLTACT_M 0x00000300 // Power Fault Action
|
|
#define USB_EPC_PFLTACT_UNCHG 0x00000000 // Unchanged
|
|
#define USB_EPC_PFLTACT_TRIS 0x00000100 // Tristate
|
|
#define USB_EPC_PFLTACT_LOW 0x00000200 // Low
|
|
#define USB_EPC_PFLTACT_HIGH 0x00000300 // High
|
|
#define USB_EPC_PFLTAEN 0x00000040 // Power Fault Action Enable
|
|
#define USB_EPC_PFLTSEN_HIGH 0x00000020 // Power Fault Sense
|
|
#define USB_EPC_PFLTEN 0x00000010 // Power Fault Input Enable
|
|
#define USB_EPC_EPENDE 0x00000004 // EPEN Drive Enable
|
|
#define USB_EPC_EPEN_M 0x00000003 // External Power Supply Enable
|
|
// Configuration
|
|
#define USB_EPC_EPEN_LOW 0x00000000 // Power Enable Active Low
|
|
#define USB_EPC_EPEN_HIGH 0x00000001 // Power Enable Active High
|
|
#define USB_EPC_EPEN_VBLOW 0x00000002 // Power Enable High if VBUS Low
|
|
#define USB_EPC_EPEN_VBHIGH 0x00000003 // Power Enable High if VBUS High
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_EPCRIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_EPCRIS_PF 0x00000001 // USB Power Fault Interrupt Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_EPCIM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_EPCIM_PF 0x00000001 // USB Power Fault Interrupt Mask
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_EPCISC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_EPCISC_PF 0x00000001 // USB Power Fault Interrupt Status
|
|
// and Clear
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_DRRIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_DRRIS_RESUME 0x00000001 // RESUME Interrupt Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_DRIM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_DRIM_RESUME 0x00000001 // RESUME Interrupt Mask
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_DRISC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_DRISC_RESUME 0x00000001 // RESUME Interrupt Status and
|
|
// Clear
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_GPCS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_GPCS_DEVMODOTG 0x00000002 // Enable Device Mode
|
|
#define USB_GPCS_DEVMOD 0x00000001 // Device Mode
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_VDC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_VDC_VBDEN 0x00000001 // VBUS Droop Enable
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_VDCRIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_VDCRIS_VD 0x00000001 // VBUS Droop Raw Interrupt Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_VDCIM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_VDCIM_VD 0x00000001 // VBUS Droop Interrupt Mask
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_VDCISC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_VDCISC_VD 0x00000001 // VBUS Droop Interrupt Status and
|
|
// Clear
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_IDVRIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_IDVRIS_ID 0x00000001 // ID Valid Detect Raw Interrupt
|
|
// Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_IDVIM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_IDVIM_ID 0x00000001 // ID Valid Detect Interrupt Mask
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_IDVISC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_IDVISC_ID 0x00000001 // ID Valid Detect Interrupt Status
|
|
// and Clear
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the USB_O_DMASEL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_DMASEL_DMACTX_M 0x00F00000 // DMA C TX Select
|
|
#define USB_DMASEL_DMACRX_M 0x000F0000 // DMA C RX Select
|
|
#define USB_DMASEL_DMABTX_M 0x0000F000 // DMA B TX Select
|
|
#define USB_DMASEL_DMABRX_M 0x00000F00 // DMA B RX Select
|
|
#define USB_DMASEL_DMAATX_M 0x000000F0 // DMA A TX Select
|
|
#define USB_DMASEL_DMAARX_M 0x0000000F // DMA A RX Select
|
|
#define USB_DMASEL_DMABTX_S 12
|
|
#define USB_DMASEL_DMABRX_S 8
|
|
#define USB_DMASEL_DMAATX_S 4
|
|
#define USB_DMASEL_DMAARX_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following definitions are deprecated.
|
|
//
|
|
//*****************************************************************************
|
|
#ifndef DEPRECATED
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the
|
|
// USB_O_TXFIFOADD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_TXFIFOADD_ADDR_2048 0x00000009 // 2048
|
|
#define USB_TXFIFOADD_ADDR_1024 0x00000008 // 1024
|
|
#define USB_TXFIFOADD_ADDR_512 0x00000007 // 512
|
|
#define USB_TXFIFOADD_ADDR_256 0x00000006 // 256
|
|
#define USB_TXFIFOADD_ADDR_128 0x00000005 // 128
|
|
#define USB_TXFIFOADD_ADDR_64 0x00000004 // 64
|
|
#define USB_TXFIFOADD_ADDR_32 0x00000003 // 32
|
|
#define USB_TXFIFOADD_ADDR_16 0x00000002 // 16
|
|
#define USB_TXFIFOADD_ADDR_8 0x00000001 // 8
|
|
#define USB_TXFIFOADD_ADDR_0 0x00000000 // 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the
|
|
// USB_O_RXFIFOADD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define USB_RXFIFOADD_ADDR_2048 0x00000009 // 2048
|
|
#define USB_RXFIFOADD_ADDR_1024 0x00000008 // 1024
|
|
#define USB_RXFIFOADD_ADDR_512 0x00000007 // 512
|
|
#define USB_RXFIFOADD_ADDR_256 0x00000006 // 256
|
|
#define USB_RXFIFOADD_ADDR_128 0x00000005 // 128
|
|
#define USB_RXFIFOADD_ADDR_64 0x00000004 // 64
|
|
#define USB_RXFIFOADD_ADDR_32 0x00000003 // 32
|
|
#define USB_RXFIFOADD_ADDR_16 0x00000002 // 16
|
|
#define USB_RXFIFOADD_ADDR_8 0x00000001 // 8
|
|
#define USB_RXFIFOADD_ADDR_0 0x00000000 // 0
|
|
|
|
#endif
|
|
|
|
#endif // __HW_USB_H__
|