openblt/Target/Demo/ARMCM0_STM32F0_Nucleo_F091R.../Boot/lib/SPL/inc/stm32f0xx_dac.h

313 lines
15 KiB
C

/**
******************************************************************************
* @file stm32f0xx_dac.h
* @author MCD Application Team
* @version V1.5.0
* @date 05-December-2014
* @brief This file contains all the functions prototypes for the DAC firmware
* library, applicable only for STM32F051 and STM32F072 devices.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0XX_DAC_H
#define __STM32F0XX_DAC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx.h"
/** @addtogroup STM32F0xx_StdPeriph_Driver
* @{
*/
/** @addtogroup DAC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief DAC Init structure definition
*/
typedef struct
{
uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel.
This parameter can be a value of @ref DAC_trigger_selection */
uint32_t DAC_WaveGeneration; /*!< Specifies whether DAC channel noise waves or triangle waves
are generated, or whether no wave is generated.
This parameter can be a value of @ref DAC_wave_generation
This parameter is only applicable for STM32F072 devices */
uint32_t DAC_LFSRUnmask_TriangleAmplitude; /*!< Specifies the LFSR mask for noise wave generation or
the maximum amplitude triangle generation for the DAC channel.
This parameter can be a value of @ref DAC_lfsrunmask_triangleamplitude
This parameter is only applicable for STM32F072 devices */
uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
This parameter can be a value of @ref DAC_output_buffer */
}DAC_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup DAC_Exported_Constants
* @{
*/
/** @defgroup DAC_Trigger
* @{
*/
#define DAC_Trigger_None ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
has been loaded, and not by external trigger */
#define DAC_Trigger_T6_TRGO ((uint32_t)0x00000004) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel1 */
#define DAC_Trigger_T3_TRGO ((uint32_t)0x0000000C) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel1 */
#define DAC_Trigger_T7_TRGO ((uint32_t)0x00000014) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel1,
applicable only for STM32F072 devices */
#define DAC_Trigger_T15_TRGO ((uint32_t)0x0000001C) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel1 */
#define DAC_Trigger_T2_TRGO ((uint32_t)0x00000024) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel1 */
#define DAC_Trigger_Ext_IT9 ((uint32_t)0x00000034) /*!< EXTI Line9 event selected as external conversion trigger for DAC channels */
#define DAC_Trigger_Software ((uint32_t)0x0000003C) /*!< Conversion started by software trigger for DAC channels */
#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_Trigger_None) || \
((TRIGGER) == DAC_Trigger_T6_TRGO) || \
((TRIGGER) == DAC_Trigger_T7_TRGO) || \
((TRIGGER) == DAC_Trigger_T3_TRGO) || \
((TRIGGER) == DAC_Trigger_T15_TRGO) || \
((TRIGGER) == DAC_Trigger_T2_TRGO) || \
((TRIGGER) == DAC_Trigger_Ext_IT9) || \
((TRIGGER) == DAC_Trigger_Software))
/**
* @}
*/
/** @defgroup DAC_wave_generation
* @brief This parameters are only applicable for STM32F072 devices.
* @{
*/
#define DAC_WaveGeneration_None ((uint32_t)0x00000000)
#define DAC_WaveGeneration_Noise ((uint32_t)0x00000040)
#define DAC_WaveGeneration_Triangle ((uint32_t)0x00000080)
#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WaveGeneration_None) || \
((WAVE) == DAC_WaveGeneration_Noise) || \
((WAVE) == DAC_WaveGeneration_Triangle))
/**
* @}
*/
/** @defgroup DAC_lfsrunmask_triangleamplitude
* @brief These parameters are only applicable for STM32F072 devices.
* @{
*/
#define DAC_LFSRUnmask_Bit0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
#define DAC_LFSRUnmask_Bits1_0 ((uint32_t)0x00000100) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits2_0 ((uint32_t)0x00000200) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits3_0 ((uint32_t)0x00000300) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits4_0 ((uint32_t)0x00000400) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits5_0 ((uint32_t)0x00000500) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits6_0 ((uint32_t)0x00000600) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits7_0 ((uint32_t)0x00000700) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits8_0 ((uint32_t)0x00000800) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits9_0 ((uint32_t)0x00000900) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits10_0 ((uint32_t)0x00000A00) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits11_0 ((uint32_t)0x00000B00) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
#define DAC_TriangleAmplitude_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */
#define DAC_TriangleAmplitude_3 ((uint32_t)0x00000100) /*!< Select max triangle amplitude of 3 */
#define DAC_TriangleAmplitude_7 ((uint32_t)0x00000200) /*!< Select max triangle amplitude of 7 */
#define DAC_TriangleAmplitude_15 ((uint32_t)0x00000300) /*!< Select max triangle amplitude of 15 */
#define DAC_TriangleAmplitude_31 ((uint32_t)0x00000400) /*!< Select max triangle amplitude of 31 */
#define DAC_TriangleAmplitude_63 ((uint32_t)0x00000500) /*!< Select max triangle amplitude of 63 */
#define DAC_TriangleAmplitude_127 ((uint32_t)0x00000600) /*!< Select max triangle amplitude of 127 */
#define DAC_TriangleAmplitude_255 ((uint32_t)0x00000700) /*!< Select max triangle amplitude of 255 */
#define DAC_TriangleAmplitude_511 ((uint32_t)0x00000800) /*!< Select max triangle amplitude of 511 */
#define DAC_TriangleAmplitude_1023 ((uint32_t)0x00000900) /*!< Select max triangle amplitude of 1023 */
#define DAC_TriangleAmplitude_2047 ((uint32_t)0x00000A00) /*!< Select max triangle amplitude of 2047 */
#define DAC_TriangleAmplitude_4095 ((uint32_t)0x00000B00) /*!< Select max triangle amplitude of 4095 */
#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUnmask_Bit0) || \
((VALUE) == DAC_LFSRUnmask_Bits1_0) || \
((VALUE) == DAC_LFSRUnmask_Bits2_0) || \
((VALUE) == DAC_LFSRUnmask_Bits3_0) || \
((VALUE) == DAC_LFSRUnmask_Bits4_0) || \
((VALUE) == DAC_LFSRUnmask_Bits5_0) || \
((VALUE) == DAC_LFSRUnmask_Bits6_0) || \
((VALUE) == DAC_LFSRUnmask_Bits7_0) || \
((VALUE) == DAC_LFSRUnmask_Bits8_0) || \
((VALUE) == DAC_LFSRUnmask_Bits9_0) || \
((VALUE) == DAC_LFSRUnmask_Bits10_0) || \
((VALUE) == DAC_LFSRUnmask_Bits11_0) || \
((VALUE) == DAC_TriangleAmplitude_1) || \
((VALUE) == DAC_TriangleAmplitude_3) || \
((VALUE) == DAC_TriangleAmplitude_7) || \
((VALUE) == DAC_TriangleAmplitude_15) || \
((VALUE) == DAC_TriangleAmplitude_31) || \
((VALUE) == DAC_TriangleAmplitude_63) || \
((VALUE) == DAC_TriangleAmplitude_127) || \
((VALUE) == DAC_TriangleAmplitude_255) || \
((VALUE) == DAC_TriangleAmplitude_511) || \
((VALUE) == DAC_TriangleAmplitude_1023) || \
((VALUE) == DAC_TriangleAmplitude_2047) || \
((VALUE) == DAC_TriangleAmplitude_4095))
/**
* @}
*/
/** @defgroup DAC_OutputBuffer
* @{
*/
#define DAC_OutputBuffer_Enable ((uint32_t)0x00000000)
#define DAC_OutputBuffer_Disable DAC_CR_BOFF1
#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OutputBuffer_Enable) || \
((STATE) == DAC_OutputBuffer_Disable))
/**
* @}
*/
/** @defgroup DAC_Channel_selection
* @{
*/
#define DAC_Channel_1 ((uint32_t)0x00000000)
#define DAC_Channel_2 ((uint32_t)0x00000010) /*!< Only applicable for STM32F072 devices */
#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_Channel_1) || \
((CHANNEL) == DAC_Channel_2))
/**
* @}
*/
/** @defgroup DAC_data_alignment
* @{
*/
#define DAC_Align_12b_R ((uint32_t)0x00000000)
#define DAC_Align_12b_L ((uint32_t)0x00000004)
#define DAC_Align_8b_R ((uint32_t)0x00000008)
#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_Align_12b_R) || \
((ALIGN) == DAC_Align_12b_L) || \
((ALIGN) == DAC_Align_8b_R))
/**
* @}
*/
/** @defgroup DAC_wave_generation
* @brief These parameters are only applicable for STM32F072 devices.
* @{
*/
#define DAC_Wave_Noise ((uint32_t)0x00000040)
#define DAC_Wave_Triangle ((uint32_t)0x00000080)
#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_Wave_Noise) || \
((WAVE) == DAC_Wave_Triangle))
/**
* @}
*/
/** @defgroup DAC_data
* @{
*/
#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0)
/**
* @}
*/
/** @defgroup DAC_interrupts_definition
* @{
*/
#define DAC_IT_DMAUDR DAC_SR_DMAUDR1
#define IS_DAC_IT(IT) (((IT) == DAC_IT_DMAUDR))
/**
* @}
*/
/** @defgroup DAC_flags_definition
* @{
*/
#define DAC_FLAG_DMAUDR DAC_SR_DMAUDR1
#define IS_DAC_FLAG(FLAG) (((FLAG) == DAC_FLAG_DMAUDR))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* Function used to set the DAC configuration to the default reset state *****/
void DAC_DeInit(void);
/* DAC channels configuration: trigger, output buffer, data format functions */
void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct);
void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct);
void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState);
void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState);
void DAC_DualSoftwareTriggerCmd(FunctionalState NewState); /*!< Only applicable for STM32F072 devices */
void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState); /*!< Only applicable for STM32F072 devices */
void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data);
void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data); /*!< Only applicable for STM32F072 devices */
void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1); /*!< Only applicable for STM32F072 devices */
uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel);
/* DMA management functions ***************************************************/
void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState);
/* Interrupts and flags management functions **********************************/
void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState);
FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG);
void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG);
ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT);
void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F0XX_DAC_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/