sysmocom
/
openblt
11
0
Fork 0
Code Issues Pull Requests Releases Activity
openblt/Target/Demo/ARMCM0_STM32G0_Nucleo_G071R.../Prog/lib/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h

773 lines
39 KiB
C
Raw Blame History

/**
******************************************************************************
* @file stm32g0xx_hal.h
* @author MCD Application Team
* @brief This file contains all the functions prototypes for the HAL
* module driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G0xx_HAL_H
#define STM32G0xx_HAL_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal_conf.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
/** @defgroup HAL HAL
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup HAL_Exported_Constants HAL Exported Constants
* @{
*/
/** @defgroup HAL_TICK_FREQ Tick Frequency
* @{
*/
#define HAL_TICK_FREQ_10HZ 100U
#define HAL_TICK_FREQ_100HZ 10U
#define HAL_TICK_FREQ_1KHZ 1U
#define HAL_TICK_FREQ_DEFAULT HAL_TICK_FREQ_1KHZ
/**
* @}
*/
/**
* @}
*/
/** @defgroup SYSCFG_Exported_Constants SYSCFG Exported Constants
* @{
*/
/** @defgroup SYSCFG_BootMode Boot Mode
* @{
*/
#define SYSCFG_BOOT_MAINFLASH 0x00000000U /*!< Main Flash memory mapped at 0x0000 0000 */
#define SYSCFG_BOOT_SYSTEMFLASH SYSCFG_CFGR1_MEM_MODE_0 /*!< System Flash memory mapped at 0x0000 0000 */
#define SYSCFG_BOOT_SRAM (SYSCFG_CFGR1_MEM_MODE_1 | SYSCFG_CFGR1_MEM_MODE_0) /*!< Embedded SRAM mapped at 0x0000 0000 */
/**
* @}
*/
/** @defgroup SYSCFG_Break Break
* @{
*/
#define SYSCFG_BREAK_SP SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM Parity error signal with Break Input of TIM1/15/16/17 */
#if defined(SYSCFG_CFGR2_PVDL)
#define SYSCFG_BREAK_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection with TIM1/15/16/17 Break Input and also the PVDE and PLS bits of the Power Control Interface */
#endif
#define SYSCFG_BREAK_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM0+ with Break Input of TIM1/15/16/17 */
#define SYSCFG_BREAK_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC of CortexM0+ with Break Input of TIM1/15/16/17 */
/**
* @}
*/
#if defined(STM32G041xx) || defined(STM32G031xx) || defined(STM32G030xx)
/** @defgroup SYSCFG_ClampingDiode Clamping Diode
* @{
*/
#define SYSCFG_CDEN_PA1 SYSCFG_CFGR2_PA1_CDEN /*!< Enables Clamping Diode on PA1 */
#define SYSCFG_CDEN_PA3 SYSCFG_CFGR2_PA3_CDEN /*!< Enables Clamping Diode on PA3 */
#define SYSCFG_CDEN_PA5 SYSCFG_CFGR2_PA5_CDEN /*!< Enables Clamping Diode on PA5 */
#define SYSCFG_CDEN_PA6 SYSCFG_CFGR2_PA6_CDEN /*!< Enables Clamping Diode on PA6 */
#define SYSCFG_CDEN_PA13 SYSCFG_CFGR2_PA13_CDEN /*!< Enables Clamping Diode on PA13 */
#define SYSCFG_CDEN_PB0 SYSCFG_CFGR2_PB0_CDEN /*!< Enables Clamping Diode on PB0 */
#define SYSCFG_CDEN_PB1 SYSCFG_CFGR2_PB1_CDEN /*!< Enables Clamping Diode on PB1 */
#define SYSCFG_CDEN_PB2 SYSCFG_CFGR2_PB2_CDEN /*!< Enables Clamping Diode on PB2 */
/**
* @}
*/
#endif
/** @defgroup HAL_Pin_remapping Pin remapping
* @{
*/
/* Only available on cut2.0 */
#define SYSCFG_REMAP_PA11 SYSCFG_CFGR1_PA11_RMP /*!< PA11 pad behaves digitally as PA9 GPIO pin */
#define SYSCFG_REMAP_PA12 SYSCFG_CFGR1_PA12_RMP /*!< PA12 pad behaves digitally as PA10 GPIO pin */
/**
* @}
*/
/** @defgroup HAL_IR_ENV_SEL IR Modulation Envelope signal selection
* @{
*/
#define HAL_SYSCFG_IRDA_ENV_SEL_TIM16 (SYSCFG_CFGR1_IR_MOD_0 & SYSCFG_CFGR1_IR_MOD_1) /*!< 00: Timer16 is selected as IR Modulation envelope source */
#define HAL_SYSCFG_IRDA_ENV_SEL_USART1 (SYSCFG_CFGR1_IR_MOD_0) /*!< 01: USART1 is selected as IR Modulation envelope source */
#if defined (STM32G081xx) || defined (STM32G071xx) || defined (STM32G070xx)
#define HAL_SYSCFG_IRDA_ENV_SEL_USART4 (SYSCFG_CFGR1_IR_MOD_1) /*!< 10: USART4 is selected as IR Modulation envelope source */
#elif defined (STM32G041xx) || defined (STM32G031xx) || defined (STM32G030xx)
#define HAL_SYSCFG_IRDA_ENV_SEL_USART2 (SYSCFG_CFGR1_IR_MOD_1) /*!< 10: USART2 is selected as IR Modulation envelope source */
#endif
/**
* @}
*/
/** @defgroup HAL_IR_POL_SEL IR output polarity selection
* @{
*/
#define HAL_SYSCFG_IRDA_POLARITY_NOT_INVERTED 0x00000000U /*!< 00: IR output polarity not inverted */
#define HAL_SYSCFG_IRDA_POLARITY_INVERTED SYSCFG_CFGR1_IR_POL /*!< 01: IR output polarity inverted */
/**
* @}
*/
#if defined(VREFBUF)
/** @defgroup SYSCFG_VREFBUF_VoltageScale VREFBUF Voltage Scale
* @{
*/
#define SYSCFG_VREFBUF_VOLTAGE_SCALE0 0x00000000U /*!< Voltage reference scale 0: VREF_OUT1 around 2.048 V.
This requires VDDA equal to or higher than 2.4 V. */
#define SYSCFG_VREFBUF_VOLTAGE_SCALE1 VREFBUF_CSR_VRS /*!< Voltage reference scale 1: VREF_OUT1 around 2.5 V.
This requires VDDA equal to or higher than 2.8 V. */
/**
* @}
*/
/** @defgroup SYSCFG_VREFBUF_HighImpedance VREFBUF High Impedance
* @{
*/
#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE 0x00000000U /*!< VREF_plus pin is internally connected to Voltage reference buffer output */
#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE VREFBUF_CSR_HIZ /*!< VREF_plus pin is high impedance */
/**
* @}
*/
#endif /* VREFBUF */
/** @defgroup SYSCFG_FastModePlus_GPIO Fast mode Plus on GPIO
* @{
*/
/** @brief Fast mode Plus driving capability on a specific GPIO
*/
#define SYSCFG_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast mode Plus on PB6 */
#define SYSCFG_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast mode Plus on PB7 */
#define SYSCFG_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast mode Plus on PB8 */
#define SYSCFG_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast mode Plus on PB9 */
#define SYSCFG_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_PA9_FMP /*!< Enable Fast mode Plus on PA9 */
#define SYSCFG_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_PA10_FMP /*!< Enable Fast mode Plus on PA10 */
/**
* @}
*/
/** @defgroup SYSCFG_FastModePlus_I2Cx Fast mode Plus driving capability activation for I2Cx
* @{
*/
/** @brief Fast mode Plus driving capability on a specific GPIO
*/
#define SYSCFG_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast mode Plus on I2C1 */
#define SYSCFG_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable Fast mode Plus on I2C2 */
/**
* @}
*/
#if defined (STM32G081xx) || defined (STM32G071xx) || defined (STM32G070xx)
/** @defgroup SYSCFG_UCPDx_STROBE SYSCFG Dead Battery feature configuration
* @{
*/
#define SYSCFG_UCPD1_STROBE SYSCFG_CFGR1_UCPD1_STROBE /*!< UCPD1 Dead battery sw configuration */
#define SYSCFG_UCPD2_STROBE SYSCFG_CFGR1_UCPD2_STROBE /*!< UCPD2 Dead battery sw configuration */
#endif
/**
* @}
*/
/** @defgroup HAL_ISR_Wrapper HAL ISR Wrapper
* @brief ISR Wrapper
* @{
*/
#define HAL_SYSCFG_ITLINE0 0x00000000U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE1 0x00000001U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE2 0x00000002U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE3 0x00000003U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE4 0x00000004U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE5 0x00000005U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE6 0x00000006U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE7 0x00000007U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE8 0x00000008U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE9 0x00000009U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE10 0x0000000AU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE11 0x0000000BU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE12 0x0000000CU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE13 0x0000000DU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE14 0x0000000EU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE15 0x0000000FU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE16 0x00000010U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE17 0x00000011U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE18 0x00000012U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE19 0x00000013U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE20 0x00000014U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE21 0x00000015U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE22 0x00000016U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE23 0x00000017U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE24 0x00000018U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE25 0x00000019U /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE26 0x0000001AU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE27 0x0000001BU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE28 0x0000001CU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE29 0x0000001DU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE30 0x0000001EU /*!< Internal define for macro handling */
#define HAL_SYSCFG_ITLINE31 0x0000001FU /*!< Internal define for macro handling */
#define HAL_ITLINE_WWDG ((HAL_SYSCFG_ITLINE0 << 0x18U) | SYSCFG_ITLINE0_SR_WWDG) /*!< WWDG has expired .... */
#if defined (SYSCFG_ITLINE1_SR_PVDOUT)
#define HAL_ITLINE_PVDOUT ((HAL_SYSCFG_ITLINE1 << 0x18U) | SYSCFG_ITLINE1_SR_PVDOUT) /*!< Power voltage detection Interrupt .... */
#endif
#define HAL_ITLINE_RTC ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_RTC) /*!< RTC -> exti[19] Interrupt */
#define HAL_ITLINE_TAMPER ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_TAMPER) /*!< TAMPER -> exti[21] interrupt .... */
#define HAL_ITLINE_FLASH_ECC ((HAL_SYSCFG_ITLINE3 << 0x18U) | SYSCFG_ITLINE3_SR_FLASH_ECC) /*!< Flash ECC Interrupt */
#define HAL_ITLINE_FLASH_ITF ((HAL_SYSCFG_ITLINE3 << 0x18U) | SYSCFG_ITLINE3_SR_FLASH_ITF) /*!< Flash ITF Interrupt */
#define HAL_ITLINE_CLK_CTRL ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CLK_CTRL) /*!< CLK Control Interrupt */
#define HAL_ITLINE_EXTI0 ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI0) /*!< External Interrupt 0 */
#define HAL_ITLINE_EXTI1 ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI1) /*!< External Interrupt 1 */
#define HAL_ITLINE_EXTI2 ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI2) /*!< External Interrupt 2 */
#define HAL_ITLINE_EXTI3 ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI3) /*!< External Interrupt 3 */
#define HAL_ITLINE_EXTI4 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI4) /*!< EXTI4 Interrupt */
#define HAL_ITLINE_EXTI5 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI5) /*!< EXTI5 Interrupt */
#define HAL_ITLINE_EXTI6 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI6) /*!< EXTI6 Interrupt */
#define HAL_ITLINE_EXTI7 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI7) /*!< EXTI7 Interrupt */
#define HAL_ITLINE_EXTI8 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI8) /*!< EXTI8 Interrupt */
#define HAL_ITLINE_EXTI9 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI9) /*!< EXTI9 Interrupt */
#define HAL_ITLINE_EXTI10 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI10) /*!< EXTI10 Interrupt */
#define HAL_ITLINE_EXTI11 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI11) /*!< EXTI11 Interrupt */
#define HAL_ITLINE_EXTI12 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI12) /*!< EXTI12 Interrupt */
#define HAL_ITLINE_EXTI13 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI13) /*!< EXTI13 Interrupt */
#define HAL_ITLINE_EXTI14 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI14) /*!< EXTI14 Interrupt */
#define HAL_ITLINE_EXTI15 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI15) /*!< EXTI15 Interrupt */
#if defined (UCPD1)
#define HAL_ITLINE_UCPD1 ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_UCPD1) /*!< UCPD1 Interrupt */
#endif
#if defined (UCPD2)
#define HAL_ITLINE_UCPD2 ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_UCPD2) /*!< UCPD2 Interrupt */
#endif
#define HAL_ITLINE_DMA1_CH1 ((HAL_SYSCFG_ITLINE9 << 0x18U) | SYSCFG_ITLINE9_SR_DMA1_CH1) /*!< DMA1 Channel 1 Interrupt */
#define HAL_ITLINE_DMA1_CH2 ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH2) /*!< DMA1 Channel 2 Interrupt */
#define HAL_ITLINE_DMA1_CH3 ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH3) /*!< DMA1 Channel 3 Interrupt */
#define HAL_ITLINE_DMAMUX ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMAMUX) /*!< DMAMUX Interrupt */
#define HAL_ITLINE_DMA1_CH4 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH4) /*!< DMA1 Channel 4 Interrupt */
#define HAL_ITLINE_DMA1_CH5 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH5) /*!< DMA1 Channel 5 Interrupt */
#if defined (STM32G081xx) || defined (STM32G071xx) || defined (STM32G070xx)
#define HAL_ITLINE_DMA1_CH6 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH6) /*!< DMA1 Channel 6 Interrupt */
#define HAL_ITLINE_DMA1_CH7 ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH7) /*!< DMA1 Channel 7 Interrupt */
#endif
#define HAL_ITLINE_ADC ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_ADC) /*!< ADC Interrupt */
#if defined (COMP1)
#define HAL_ITLINE_COMP1 ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP1) /*!< COMP1 Interrupt -> exti[17] */
#endif
#if defined (COMP2)
#define HAL_ITLINE_COMP2 ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP2) /*!< COMP2 Interrupt -> exti[18] */
#endif
#define HAL_ITLINE_TIM1_BRK ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_BRK) /*!< TIM1 BRK Interrupt */
#define HAL_ITLINE_TIM1_UPD ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_UPD) /*!< TIM1 UPD Interrupt */
#define HAL_ITLINE_TIM1_TRG ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_TRG) /*!< TIM1 TRG Interrupt */
#define HAL_ITLINE_TIM1_CCU ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_CCU) /*!< TIM1 CCU Interrupt */
#define HAL_ITLINE_TIM1_CC ((HAL_SYSCFG_ITLINE14 << 0x18U) | SYSCFG_ITLINE14_SR_TIM1_CC) /*!< TIM1 CC Interrupt */
#if defined (TIM2)
#define HAL_ITLINE_TIM2 ((HAL_SYSCFG_ITLINE15 << 0x18U) | SYSCFG_ITLINE15_SR_TIM2_GLB) /*!< TIM2 Interrupt */
#endif
#define HAL_ITLINE_TIM3 ((HAL_SYSCFG_ITLINE16 << 0x18U) | SYSCFG_ITLINE16_SR_TIM3_GLB) /*!< TIM3 Interrupt */
#if defined(TIM6)
#define HAL_ITLINE_TIM6 ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_TIM6_GLB) /*!< TIM6 Interrupt */
#endif
#if defined(DAC1)
#define HAL_ITLINE_DAC ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_DAC_GLB) /*!< DAC Interrupt */
#endif
#if defined(LPTIM1)
#define HAL_ITLINE_LPTIM1 ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_LPTIM1_GLB) /*!< LPTIM1 Interrupt -> exti[29] */
#endif
#if defined(TIM6)
#define HAL_ITLINE_TIM7 ((HAL_SYSCFG_ITLINE18 << 0x18U) | SYSCFG_ITLINE18_SR_TIM7_GLB) /*!< TIM7 Interrupt */
#endif
#if defined(LPTIM2)
#define HAL_ITLINE_LPTIM2 ((HAL_SYSCFG_ITLINE18 << 0x18U) | SYSCFG_ITLINE18_SR_LPTIM2_GLB) /*!< LPTIM2 Interrupt -> exti[30] */
#endif
#define HAL_ITLINE_TIM14 ((HAL_SYSCFG_ITLINE19 << 0x18U) | SYSCFG_ITLINE19_SR_TIM14_GLB) /*!< TIM14 Interrupt */
#if defined(TIM15)
#define HAL_ITLINE_TIM15 ((HAL_SYSCFG_ITLINE20 << 0x18U) | SYSCFG_ITLINE20_SR_TIM15_GLB) /*!< TIM15 Interrupt */
#endif
#define HAL_ITLINE_TIM16 ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_TIM16_GLB) /*!< TIM16 Interrupt */
#define HAL_ITLINE_TIM17 ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_TIM17_GLB) /*!< TIM17 Interrupt */
#define HAL_ITLINE_I2C1 ((HAL_SYSCFG_ITLINE23 << 0x18U) | SYSCFG_ITLINE23_SR_I2C1_GLB) /*!< I2C1 Interrupt -> exti[23] */
#define HAL_ITLINE_I2C2 ((HAL_SYSCFG_ITLINE24 << 0x18U) | SYSCFG_ITLINE24_SR_I2C2_GLB) /*!< I2C2 Interrupt */
#define HAL_ITLINE_SPI1 ((HAL_SYSCFG_ITLINE25 << 0x18U) | SYSCFG_ITLINE25_SR_SPI1) /*!< SPI1 Interrupt */
#define HAL_ITLINE_SPI2 ((HAL_SYSCFG_ITLINE26 << 0x18U) | SYSCFG_ITLINE26_SR_SPI2) /*!< SPI2 Interrupt */
#define HAL_ITLINE_USART1 ((HAL_SYSCFG_ITLINE27 << 0x18U) | SYSCFG_ITLINE27_SR_USART1_GLB) /*!< USART1 GLB Interrupt -> exti[25] */
#define HAL_ITLINE_USART2 ((HAL_SYSCFG_ITLINE28 << 0x18U) | SYSCFG_ITLINE28_SR_USART2_GLB) /*!< USART2 GLB Interrupt -> exti[26] */
#if defined(USART3)
#define HAL_ITLINE_USART3 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART3_GLB) /*!< USART3 Interrupt .... */
#endif
#if defined(USART4)
#define HAL_ITLINE_USART4 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART4_GLB) /*!< USART4 Interrupt .... */
#endif
#if defined (LPUART1)
#define HAL_ITLINE_LPUART1 ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_LPUART1_GLB) /*!< LPUART1 Interrupt -> exti[28]*/
#endif
#if defined (CEC)
#define HAL_ITLINE_CEC ((HAL_SYSCFG_ITLINE30 << 0x18U) | SYSCFG_ITLINE30_SR_CEC) /*!< CEC Interrupt -> exti[27] */
#endif
#if defined (RNG)
#define HAL_ITLINE_RNG ((HAL_SYSCFG_ITLINE31 << 0x18U) | SYSCFG_ITLINE31_SR_RNG) /*!< RNG Interrupt */
#endif
#if defined (AES)
#define HAL_ITLINE_AES ((HAL_SYSCFG_ITLINE31 << 0x18U) | SYSCFG_ITLINE31_SR_AES) /*!< AES Interrupt */
#endif
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup HAL_Exported_Macros HAL Exported Macros
* @{
*/
/** @defgroup DBG_Exported_Macros DBG Exported Macros
* @{
*/
/** @brief Freeze and Unfreeze Peripherals in Debug mode
*/
#if defined(DBG_APB_FZ1_DBG_TIM2_STOP)
#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM2_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM2_STOP)
#endif
#if defined(DBG_APB_FZ1_DBG_TIM3_STOP)
#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM3_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM3_STOP)
#endif
#if defined(DBG_APB_FZ1_DBG_TIM6_STOP)
#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM6_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM6_STOP)
#endif
#if defined(DBG_APB_FZ1_DBG_TIM7_STOP)
#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM7_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM7_STOP)
#endif
#if defined(DBG_APB_FZ1_DBG_RTC_STOP)
#define __HAL_DBGMCU_FREEZE_RTC() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_RTC_STOP)
#define __HAL_DBGMCU_UNFREEZE_RTC() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_RTC_STOP)
#endif
#if defined(DBG_APB_FZ1_DBG_WWDG_STOP)
#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_WWDG_STOP)
#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_WWDG_STOP)
#endif
#if defined(DBG_APB_FZ1_DBG_IWDG_STOP)
#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_IWDG_STOP)
#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_IWDG_STOP)
#endif
#if defined(DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP)
#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP)
#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP)
#endif
#if defined(DBG_APB_FZ1_DBG_LPTIM1_STOP)
#define __HAL_DBGMCU_FREEZE_LPTIM1() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM1_STOP)
#define __HAL_DBGMCU_UNFREEZE_LPTIM1() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM1_STOP)
#endif
#if defined(DBG_APB_FZ1_DBG_LPTIM2_STOP)
#define __HAL_DBGMCU_FREEZE_LPTIM2() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM2_STOP)
#define __HAL_DBGMCU_UNFREEZE_LPTIM2() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_LPTIM2_STOP)
#endif
#if defined(DBG_APB_FZ2_DBG_TIM1_STOP)
#define __HAL_DBGMCU_FREEZE_TIM1() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM1_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM1() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM1_STOP)
#endif
#if defined(DBG_APB_FZ2_DBG_TIM14_STOP)
#define __HAL_DBGMCU_FREEZE_TIM14() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM14_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM14() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM14_STOP)
#endif
#if defined(DBG_APB_FZ2_DBG_TIM15_STOP)
#define __HAL_DBGMCU_FREEZE_TIM15() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM15_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM15() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM15_STOP)
#endif
#if defined(DBG_APB_FZ2_DBG_TIM16_STOP)
#define __HAL_DBGMCU_FREEZE_TIM16() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM16_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM16() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM16_STOP)
#endif
#if defined(DBG_APB_FZ2_DBG_TIM17_STOP)
#define __HAL_DBGMCU_FREEZE_TIM17() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM17_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM17() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM17_STOP)
#endif
/**
* @}
*/
/** @defgroup SYSCFG_Exported_Macros SYSCFG Exported Macros
* @{
*/
/** @brief Main Flash memory mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_FLASH() CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE)
/** @brief System Flash memory mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, SYSCFG_CFGR1_MEM_MODE_0)
/** @brief Embedded SRAM mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_SRAM() MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, (SYSCFG_CFGR1_MEM_MODE_1|SYSCFG_CFGR1_MEM_MODE_0))
/**
* @brief Return the boot mode as configured by user.
* @retval The boot mode as configured by user. The returned value can be one
* of the following values @ref SYSCFG_BootMode
*/
#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE)
/** @brief SYSCFG Break ECC lock.
* Enable and lock the connection of Flash ECC error connection to TIM1 Break input.
* @note The selected configuration is locked and can be unlocked only by system reset.
*/
#define __HAL_SYSCFG_BREAK_ECC_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_ECCL)
/** @brief SYSCFG Break Cortex-M0+ Lockup lock.
* Enables and locks the connection of Cortex-M0+ LOCKUP (Hardfault) output to TIM1/15/16/17 Break input
* @note The selected configuration is locked and can be unlocked only by system reset.
*/
#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL)
#if defined(SYSCFG_CFGR2_PVDL)
/** @brief SYSCFG Break PVD lock.
* Enables and locks the PVD connection with Timer1/15/16/17 Break input, as well as the PVDE and PLS[2:0] in the PWR_CR register
* @note The selected configuration is locked and can be unlocked only by system reset
*/
#define __HAL_SYSCFG_BREAK_PVD_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_PVDL)
#endif
/** @brief SYSCFG Break SRAM PARITY lock
* Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1/15/16/17
* @note The selected configuration is locked and can only be unlocked by system reset
*/
#define __HAL_SYSCFG_BREAK_SRAMPARITY_LOCK() SET_BIT(SYSCFG->CFGR2,SYSCFG_CFGR2_SPL)
/** @brief Parity check on RAM disable macro
* @note Disabling the parity check on RAM locks the configuration bit.
* To re-enable the parity check on RAM perform a system reset.
*/
#define __HAL_SYSCFG_RAM_PARITYCHECK_DISABLE() (SYSCFG->CFGR2 |= SYSCFG_CFGR2_SPF)
/** @brief Set the PEF bit to clear the SRAM Parity Error Flag.
*/
#define __HAL_SYSCFG_CLEAR_FLAG() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPF)
/** @brief Fast-mode Plus driving capability enable/disable macros
* @param __FASTMODEPLUS__ This parameter can be a value of @ref SYSCFG_FastModePlus_GPIO
*/
#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\
SET_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\
}while(0U)
#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\
CLEAR_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\
}while(0U)
#if defined(STM32G041xx) || defined(STM32G031xx) || defined(STM32G030xx)
/** @brief Clamping Diode on specific pins enable/disable macros
* @param __PIN__ This parameter can be a combination of values @ref SYSCFG_ClampingDiode
*/
#define __HAL_SYSCFG_CLAMPINGDIODE_ENABLE(__PIN__) do {assert_param(IS_SYSCFG_CLAMPINGDIODE((__PIN__)));\
SET_BIT(SYSCFG->CFGR2, (__PIN__));\
}while(0U)
#define __HAL_SYSCFG_CLAMPINGDIODE_DISABLE(__PIN__) do {assert_param(IS_SYSCFG_CLAMPINGDIODE((__PIN__)));\
CLEAR_BIT(SYSCFG->CFGR2, (__PIN__));\
}while(0U)
#endif
/** @brief ISR wrapper check
* @note Allow to determine interrupt source per line.
*/
#define __HAL_SYSCFG_GET_PENDING_IT(__SOURCE__) (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18U)] & ((__SOURCE__) & 0x00FFFFFFU))
/** @brief selection of the modulation envelope signal macro, using bits [7:6] of SYSCFG_CFGR1 register
* @param __SOURCE__ This parameter can be a value of @ref HAL_IR_ENV_SEL
*/
#define __HAL_SYSCFG_IRDA_ENV_SELECTION(__SOURCE__) do {assert_param(IS_HAL_SYSCFG_IRDA_ENV_SEL((__SOURCE__)));\
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_MOD);\
SET_BIT(SYSCFG->CFGR1, (__SOURCE__));\
}while(0U)
#define __HAL_SYSCFG_GET_IRDA_ENV_SELECTION() ((SYSCFG->CFGR1) & 0x000000C0U)
/** @brief IROut Polarity Selection, using bit[5] of SYSCFG_CFGR1 register
* @param __SEL__ This parameter can be a value of @ref HAL_IR_POL_SEL
*/
#define __HAL_SYSCFG_IRDA_OUT_POLARITY_SELECTION(__SEL__) do { assert_param(IS_HAL_SYSCFG_IRDA_POL_SEL((__SEL__)));\
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL);\
SET_BIT(SYSCFG->CFGR1,(__SEL__));\
}while(0U)
/**
* @brief Return the IROut Polarity mode as configured by user.
* @retval The IROut polarity as configured by user. The returned value can be one
* of @ref HAL_IR_POL_SEL
*/
#define __HAL_SYSCFG_GET_POLARITY() READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL)
/** @brief Break input to TIM1/15/16/17 capability enable/disable macros
* @param __BREAK__ This parameter can be a value of @ref SYSCFG_Break
*/
#define __HAL_SYSCFG_BREAK_ENABLE(__BREAK__) do {assert_param(IS_SYSCFG_BREAK_CONFIG((__BREAK__)));\
SET_BIT(SYSCFG->CFGR2, (__BREAK__));\
}while(0U)
#define __HAL_SYSCFG_BREAK_DISABLE(__BREAK__) do {assert_param(IS_SYSCFG_BREAK_CONFIG((__BREAK__)));\
CLEAR_BIT(SYSCFG->CFGR2, (__BREAK__));\
}while(0U)
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup SYSCFG_Private_Macros SYSCFG Private Macros
* @{
*/
#if defined (PWR_PVD_SUPPORT)
#define IS_SYSCFG_BREAK_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_BREAK_SP) || \
((__CONFIG__) == SYSCFG_BREAK_PVD) || \
((__CONFIG__) == SYSCFG_BREAK_ECC) || \
((__CONFIG__) == SYSCFG_BREAK_LOCKUP))
#else
#define IS_SYSCFG_BREAK_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_BREAK_SP) || \
((__CONFIG__) == SYSCFG_BREAK_ECC) || \
((__CONFIG__) == SYSCFG_BREAK_LOCKUP))
#endif
#if defined(STM32G041xx) || defined(STM32G031xx) || defined(STM32G030xx)
#define IS_SYSCFG_CLAMPINGDIODE(__PIN__) ((((__PIN__) & SYSCFG_CDEN_PA1) == SYSCFG_CDEN_PA1) || \
(((__PIN__) & SYSCFG_CDEN_PA3) == SYSCFG_CDEN_PA3) || \
(((__PIN__) & SYSCFG_CDEN_PA5) == SYSCFG_CDEN_PA5) || \
(((__PIN__) & SYSCFG_CDEN_PA6) == SYSCFG_CDEN_PA6) || \
(((__PIN__) & SYSCFG_CDEN_PA13) == SYSCFG_CDEN_PA13) || \
(((__PIN__) & SYSCFG_CDEN_PB0) == SYSCFG_CDEN_PB0) || \
(((__PIN__) & SYSCFG_CDEN_PB1) == SYSCFG_CDEN_PB1) || \
(((__PIN__) & SYSCFG_CDEN_PB2) == SYSCFG_CDEN_PB2))
#endif
#if defined (STM32G081xx) || defined (STM32G071xx) || defined (STM32G070xx)
#define IS_HAL_SYSCFG_IRDA_ENV_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_TIM16) || \
((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART1) || \
((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART4))
#elif defined (STM32G041xx) || defined (STM32G031xx) || defined (STM32G030xx)
#define IS_HAL_SYSCFG_IRDA_ENV_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_TIM16) || \
((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART1) || \
((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART2))
#endif
#define IS_HAL_SYSCFG_IRDA_POL_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_POLARITY_NOT_INVERTED) || \
((SEL) == HAL_SYSCFG_IRDA_POLARITY_INVERTED))
#if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE)
#define IS_SYSCFG_DBATT_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_UCPD1_STROBE) || \
((__CONFIG__) == SYSCFG_UCPD2_STROBE) || \
((__CONFIG__) == (SYSCFG_UCPD1_STROBE | SYSCFG_UCPD2_STROBE)))
#endif
#if defined(VREFBUF)
#define IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(__SCALE__) (((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE0) || \
((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE1))
#define IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(__VALUE__) (((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE) || \
((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE))
#define IS_SYSCFG_VREFBUF_TRIMMING(__VALUE__) (((__VALUE__) > 0U) && ((__VALUE__) <= VREFBUF_CCR_TRIM))
#endif /* VREFBUF */
#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PA9) == SYSCFG_FASTMODEPLUS_PA9) || \
(((__PIN__) & SYSCFG_FASTMODEPLUS_PA10) == SYSCFG_FASTMODEPLUS_PA10) || \
(((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \
(((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \
(((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \
(((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9))
#define IS_HAL_REMAP_PIN(RMP) (((RMP) == SYSCFG_REMAP_PA11) || \
((RMP) == SYSCFG_REMAP_PA12) || \
((RMP) == (SYSCFG_REMAP_PA11 | SYSCFG_REMAP_PA12)))
/**
* @}
*/
/** @defgroup HAL_Private_Macros HAL Private Macros
* @{
*/
#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \
((FREQ) == HAL_TICK_FREQ_100HZ) || \
((FREQ) == HAL_TICK_FREQ_1KHZ))
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup HAL_Exported_Functions HAL Exported Functions
* @{
*/
/** @defgroup HAL_Exported_Functions_Group1 HAL Initialization and Configuration functions
* @{
*/
/* Initialization and Configuration functions ******************************/
HAL_StatusTypeDef HAL_Init(void);
HAL_StatusTypeDef HAL_DeInit(void);
void HAL_MspInit(void);
void HAL_MspDeInit(void);
HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority);
/**
* @}
*/
/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions
* @{
*/
/* Peripheral Control functions ************************************************/
void HAL_IncTick(void);
void HAL_Delay(uint32_t Delay);
uint32_t HAL_GetTick(void);
uint32_t HAL_GetTickPrio(void);
HAL_StatusTypeDef HAL_SetTickFreq(uint32_t Freq);
uint32_t HAL_GetTickFreq(void);
void HAL_SuspendTick(void);
void HAL_ResumeTick(void);
uint32_t HAL_GetHalVersion(void);
uint32_t HAL_GetREVID(void);
uint32_t HAL_GetDEVID(void);
uint32_t HAL_GetUIDw0(void);
uint32_t HAL_GetUIDw1(void);
uint32_t HAL_GetUIDw2(void);
/**
* @}
*/
/** @defgroup HAL_Exported_Functions_Group3 DBGMCU Control functions
* @{
*/
/* DBGMCU Peripheral Control functions *****************************************/
void HAL_DBGMCU_EnableDBGStopMode(void);
void HAL_DBGMCU_DisableDBGStopMode(void);
void HAL_DBGMCU_EnableDBGStandbyMode(void);
void HAL_DBGMCU_DisableDBGStandbyMode(void);
/**
* @}
*/
/* Exported variables ---------------------------------------------------------*/
/** @addtogroup HAL_Exported_Variables
* @{
*/
extern __IO uint32_t uwTick;
extern uint32_t uwTickPrio;
extern uint32_t uwTickFreq;
/**
* @}
*/
/** @defgroup HAL_Exported_Functions_Group4 SYSCFG configuration functions
* @{
*/
/* SYSCFG Control functions ****************************************************/
#if defined(VREFBUF)
void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling);
void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode);
void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue);
HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void);
void HAL_SYSCFG_DisableVREFBUF(void);
#endif /* VREFBUF */
void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void);
void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void);
void HAL_SYSCFG_EnableRemap(uint32_t PinRemap);
void HAL_SYSCFG_DisableRemap(uint32_t PinRemap);
#if defined(STM32G041xx) || defined(STM32G031xx) || defined(STM32G030xx)
void HAL_SYSCFG_EnableClampingDiode(uint32_t PinConfig);
void HAL_SYSCFG_DisableClampingDiode(uint32_t PinConfig);
#endif
#if defined (SYSCFG_CFGR1_UCPD1_STROBE) || defined (SYSCFG_CFGR1_UCPD2_STROBE)
void HAL_SYSCFG_StrobeDBattpinsConfig(uint32_t ConfigDeadBattery);
#endif
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32G0xx_HAL_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Reference in New Issue View Git Blame Copy Permalink