openblt/Target/Demo/ARMCM4_TM4C_DK_TM4C123G_IAR/Boot/lib/inc/hw_gpio.h

126 lines
6.3 KiB
C

//*****************************************************************************
//
// hw_gpio.h - Defines and Macros for GPIO hardware.
//
// Copyright (c) 2005-2013 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// This is part of revision 1.1 of the Tiva Firmware Development Package.
//
//*****************************************************************************
#ifndef __HW_GPIO_H__
#define __HW_GPIO_H__
//*****************************************************************************
//
// The following are defines for the GPIO register offsets.
//
//*****************************************************************************
#define GPIO_O_DATA 0x00000000 // GPIO Data
#define GPIO_O_DIR 0x00000400 // GPIO Direction
#define GPIO_O_IS 0x00000404 // GPIO Interrupt Sense
#define GPIO_O_IBE 0x00000408 // GPIO Interrupt Both Edges
#define GPIO_O_IEV 0x0000040C // GPIO Interrupt Event
#define GPIO_O_IM 0x00000410 // GPIO Interrupt Mask
#define GPIO_O_RIS 0x00000414 // GPIO Raw Interrupt Status
#define GPIO_O_MIS 0x00000418 // GPIO Masked Interrupt Status
#define GPIO_O_ICR 0x0000041C // GPIO Interrupt Clear
#define GPIO_O_AFSEL 0x00000420 // GPIO Alternate Function Select
#define GPIO_O_DR2R 0x00000500 // GPIO 2-mA Drive Select
#define GPIO_O_DR4R 0x00000504 // GPIO 4-mA Drive Select
#define GPIO_O_DR8R 0x00000508 // GPIO 8-mA Drive Select
#define GPIO_O_ODR 0x0000050C // GPIO Open Drain Select
#define GPIO_O_PUR 0x00000510 // GPIO Pull-Up Select
#define GPIO_O_PDR 0x00000514 // GPIO Pull-Down Select
#define GPIO_O_SLR 0x00000518 // GPIO Slew Rate Control Select
#define GPIO_O_DEN 0x0000051C // GPIO Digital Enable
#define GPIO_O_LOCK 0x00000520 // GPIO Lock
#define GPIO_O_CR 0x00000524 // GPIO Commit
#define GPIO_O_AMSEL 0x00000528 // GPIO Analog Mode Select
#define GPIO_O_PCTL 0x0000052C // GPIO Port Control
#define GPIO_O_ADCCTL 0x00000530 // GPIO ADC Control
#define GPIO_O_DMACTL 0x00000534 // GPIO DMA Control
#define GPIO_O_SI 0x00000538 // GPIO Select Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_IM register.
//
//*****************************************************************************
#define GPIO_IM_GPIO_M 0x000000FF // GPIO Interrupt Mask Enable
#define GPIO_IM_GPIO_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_RIS register.
//
//*****************************************************************************
#define GPIO_RIS_GPIO_M 0x000000FF // GPIO Interrupt Raw Status
#define GPIO_RIS_GPIO_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_MIS register.
//
//*****************************************************************************
#define GPIO_MIS_GPIO_M 0x000000FF // GPIO Masked Interrupt Status
#define GPIO_MIS_GPIO_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_ICR register.
//
//*****************************************************************************
#define GPIO_ICR_GPIO_M 0x000000FF // GPIO Interrupt Clear
#define GPIO_ICR_GPIO_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_LOCK register.
//
//*****************************************************************************
#define GPIO_LOCK_M 0xFFFFFFFF // GPIO Lock
#define GPIO_LOCK_UNLOCKED 0x00000000 // The GPIOCR register is unlocked
// and may be modified
#define GPIO_LOCK_LOCKED 0x00000001 // The GPIOCR register is locked
// and may not be modified
#define GPIO_LOCK_KEY 0x4C4F434B // Unlocks the GPIO_CR register
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_SI register.
//
//*****************************************************************************
#define GPIO_SI_SUM 0x00000001 // Summary Interrupt
#endif // __HW_GPIO_H__