sysmocom
/
openblt
11
0
Fork 0
Code Issues Pull Requests Releases Activity
openblt/Target/Source/ARMCM3_STM32F1/usb.c

574 lines
22 KiB
C
Raw Blame History

/************************************************************************************//**
* \file Source\ARMCM3_STM32F1\usb.c
* \brief Bootloader USB communication interface source file.
* \ingroup Target_ARMCM3_STM32F1
* \internal
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2011 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
/****************************************************************************************
* Include files
****************************************************************************************/
#include "boot.h" /* bootloader generic header */
#if (BOOT_COM_USB_ENABLE > 0)
#include "usb.h" /* USB driver module */
#include "usb_lib.h" /* USB library driver header */
#include "usb_desc.h" /* USB descriptor header */
#include "usb_pwr.h" /* USB power management header */
#include "usb_istr.h" /* USB interrupt routine header */
/****************************************************************************************
* Macro definitions
****************************************************************************************/
/** \brief Total number of fifo buffers. */
#define FIFO_MAX_BUFFERS (2)
/** \brief Invalid value for a fifo buffer handle. */
#define FIFO_ERR_INVALID_HANDLE (255)
/** \brief Number of bytes that fit in the fifo pipe. */
#define FIFO_PIPE_SIZE (64)
/****************************************************************************************
* Type definitions
****************************************************************************************/
/** \brief Structure type for fifo control. */
typedef struct t_fifo_ctrl
{
blt_int8u *startptr; /**< pointer to start of buffer */
blt_int8u *endptr; /**< pointer to end of buffer */
blt_int8u *readptr; /**< pointer to next read location */
blt_int8u *writeptr; /**< pointer to next free location */
blt_int8u length; /**< number of buffer elements */
blt_int8u entries; /**< # of full buffer elements */
blt_int8u handle; /**< handle of the buffer */
struct t_fifo_ctrl *fifoctrlptr; /**< pointer to free buffer control */
} tFifoCtrl;
/** \brief Structure type for a fifo pipe. */
typedef struct
{
blt_int8u handle; /**< fifo handle */
blt_int8u data[FIFO_PIPE_SIZE]; /**< fifo data buffer */
} tFifoPipe; /**< USB pipe fifo type */
/****************************************************************************************
* Function prototypes
****************************************************************************************/
static blt_bool UsbReceiveByte(blt_int8u *data);
static blt_bool UsbTransmitByte(blt_int8u data);
static void UsbFifoMgrInit(void);
static blt_int8u UsbFifoMgrCreate(blt_int8u *buffer, blt_int8u length);
static blt_bool UsbFifoMgrWrite(blt_int8u handle, blt_int8u data);
static blt_bool UsbFifoMgrRead(blt_int8u handle, blt_int8u *data);
static blt_int8u UsbFifoMgrScan(blt_int8u handle);
/****************************************************************************************
* Local data declarations
****************************************************************************************/
/** \brief Local variable that holds the fifo control structures. */
static tFifoCtrl fifoCtrl[FIFO_MAX_BUFFERS];
/** \brief Local pointer that points to the next free fifo control structure. */
static tFifoCtrl *fifoCtrlFree;
/** \brief Fifo pipe used for the bulk in endpoint. */
static tFifoPipe fifoPipeBulkIN;
/** \brief Fifo pipe used for the bulk out endpoint. */
static tFifoPipe fifoPipeBulkOUT;
/************************************************************************************//**
** \brief Initializes the USB communication interface.
** \return none.
**
****************************************************************************************/
void UsbInit(void)
{
/* initialize the FIFO manager */
UsbFifoMgrInit();
/* place 2 buffers under FIFO management */
fifoPipeBulkIN.handle = UsbFifoMgrCreate(fifoPipeBulkIN.data, FIFO_PIPE_SIZE);
fifoPipeBulkOUT.handle = UsbFifoMgrCreate(fifoPipeBulkOUT.data, FIFO_PIPE_SIZE);
/* validate fifo handles */
ASSERT_RT((fifoPipeBulkIN.handle != FIFO_ERR_INVALID_HANDLE) && \
(fifoPipeBulkOUT.handle != FIFO_ERR_INVALID_HANDLE));
/* initialize the low level USB driver */
USB_Init();
} /*** end of UsbInit ***/
/************************************************************************************//**
** \brief Releases the USB communication interface.
** \return none.
**
****************************************************************************************/
void UsbFree(void)
{
/* disconnect the USB device from the USB host */
UsbConnectHook(BLT_FALSE);
} /*** end of UsbFree ***/
/************************************************************************************//**
** \brief Transmits a packet formatted for the communication interface.
** \param data Pointer to byte array with data that it to be transmitted.
** \param len Number of bytes that are to be transmitted.
** \return none.
**
****************************************************************************************/
void UsbTransmitPacket(blt_int8u *data, blt_int8u len)
{
blt_int16u data_index;
blt_bool result;
/* verify validity of the len-paramenter */
ASSERT_RT(len <= BOOT_COM_USB_TX_MAX_DATA);
/* first transmit the length of the packet */
result = UsbTransmitByte(len);
ASSERT_RT(result == BLT_TRUE);
/* transmit all the packet bytes one-by-one */
for (data_index = 0; data_index < len; data_index++)
{
/* keep the watchdog happy */
CopService();
/* write byte */
result = UsbTransmitByte(data[data_index]);
ASSERT_RT(result == BLT_TRUE);
}
} /*** end of UsbTransmitPacket ***/
/************************************************************************************//**
** \brief Receives a communication interface packet if one is present.
** \param data Pointer to byte array where the data is to be stored.
** \param len Pointer where the length of the packet is to be stored.
** \return BLT_TRUE if a packet was received, BLT_FALSE otherwise.
**
****************************************************************************************/
blt_bool UsbReceivePacket(blt_int8u *data, blt_int8u *len)
{
static blt_int8u xcpCtoReqPacket[BOOT_COM_USB_RX_MAX_DATA+1]; /* one extra for length */
static blt_int8u xcpCtoRxLength;
static blt_bool xcpCtoRxInProgress = BLT_FALSE;
/* poll USB interrupt flags to process USB related events */
USB_Istr();
/* start of cto packet received? */
if (xcpCtoRxInProgress == BLT_FALSE)
{
/* store the message length when received */
if (UsbReceiveByte(&xcpCtoReqPacket[0]) == BLT_TRUE)
{
if ( (xcpCtoReqPacket[0] > 0) &&
(xcpCtoReqPacket[0] <= BOOT_COM_USB_RX_MAX_DATA) )
{
/* indicate that a cto packet is being received */
xcpCtoRxInProgress = BLT_TRUE;
/* reset packet data count */
xcpCtoRxLength = 0;
}
}
}
else
{
/* store the next packet byte */
if (UsbReceiveByte(&xcpCtoReqPacket[xcpCtoRxLength+1]) == BLT_TRUE)
{
/* increment the packet data count */
xcpCtoRxLength++;
/* check to see if the entire packet was received */
if (xcpCtoRxLength == xcpCtoReqPacket[0])
{
/* copy the packet data */
CpuMemCopy((blt_int32u)data, (blt_int32u)&xcpCtoReqPacket[1], xcpCtoRxLength);
/* done with cto packet reception */
xcpCtoRxInProgress = BLT_FALSE;
/* set the packet length */
*len = xcpCtoRxLength;
/* packet reception complete */
return BLT_TRUE;
}
}
}
/* packet reception not yet complete */
return BLT_FALSE;
} /*** end of UsbReceivePacket ***/
/************************************************************************************//**
** \brief Receives a communication interface byte if one is present.
** \param data Pointer to byte where the data is to be stored.
** \return BLT_TRUE if a byte was received, BLT_FALSE otherwise.
**
****************************************************************************************/
static blt_bool UsbReceiveByte(blt_int8u *data)
{
blt_bool result;
/* obtain data from the fifo */
result = UsbFifoMgrRead(fifoPipeBulkOUT.handle, data);
return result;
} /*** end of UsbReceiveByte ***/
/************************************************************************************//**
** \brief Transmits a communication interface byte.
** \param data Value of byte that is to be transmitted.
** \return BLT_TRUE if the byte was transmitted, BLT_FALSE otherwise.
**
****************************************************************************************/
static blt_bool UsbTransmitByte(blt_int8u data)
{
blt_bool result;
/* write data from to fifo */
result = UsbFifoMgrWrite(fifoPipeBulkIN.handle, data);
return result;
} /*** end of UsbTransmitByte ***/
/************************************************************************************//**
** \brief Power-off system clocks and power while entering suspend mode.
** \return none.
**
****************************************************************************************/
void UsbEnterLowPowerMode(void)
{
/* Set the device state to suspend */
bDeviceState = SUSPENDED;
/* power-off system clocks and power */
UsbEnterLowPowerModeHook();
} /*** end of UsbEnterLowPowerMode ***/
/************************************************************************************//**
** \brief Restores system clocks and power while exiting suspend mode.
** \return none.
**
****************************************************************************************/
void UsbLeaveLowPowerMode(void)
{
DEVICE_INFO *pInfo = &Device_Info;
/* restore power and system clocks */
UsbLeaveLowPowerModeHook();
/* Set the device state to the correct state */
if (pInfo->Current_Configuration != 0)
{
/* Device configured */
bDeviceState = CONFIGURED;
}
else
{
bDeviceState = ATTACHED;
}
} /*** end of UsbLeaveLowPowerMode ***/
/************************************************************************************//**
** \brief Checks if there is still data left to transmit and if so submits it
** for transmission with the USB endpoint.
** \return none.
**
****************************************************************************************/
void UsbTransmitPipeBulkIN(void)
{
/* USB_Tx_Buffer is static for run-time optimalization */
static uint8_t USB_Tx_Buffer[BULK_DATA_SIZE];
blt_int8u nr_of_bytes_for_tx_endpoint;
blt_int8u byte_counter;
blt_int8u byte_value;
blt_bool result;
/* read how many bytes should be transmitted */
nr_of_bytes_for_tx_endpoint = UsbFifoMgrScan(fifoPipeBulkIN.handle);
/* only continue if there is actually data left to transmit */
if (nr_of_bytes_for_tx_endpoint == 0)
{
return;
}
/* make sure to not transmit more than the USB endpoint can handle */
if (nr_of_bytes_for_tx_endpoint > BULK_DATA_SIZE)
{
nr_of_bytes_for_tx_endpoint = BULK_DATA_SIZE;
}
/* copy the transmit data to the transmit buffer */
for (byte_counter=0; byte_counter < nr_of_bytes_for_tx_endpoint; byte_counter++)
{
/* obtain data from the fifo */
result = UsbFifoMgrRead(fifoPipeBulkIN.handle, &byte_value);
ASSERT_RT(result == BLT_TRUE);
/* store it in the endpoint's RAM */
USB_Tx_Buffer[byte_counter] = byte_value;
}
/* store it in the endpoint's RAM */
UserToPMABufferCopy(&USB_Tx_Buffer[0], ENDP1_TXADDR, nr_of_bytes_for_tx_endpoint);
/* set the number of bytes that need to be transmitted from this endpoint */
SetEPTxCount(ENDP1, nr_of_bytes_for_tx_endpoint);
/* inform the endpoint that it can start its transmission because the data is valid */
SetEPTxValid(ENDP1);
} /*** end of UsbTransmitPipeBulkIN ***/
/************************************************************************************//**
** \brief Stores data that was received on the Bulk OUT pipe in the fifo.
** \return none.
**
****************************************************************************************/
void UsbReceivePipeBulkOUT(void)
{
/* USB_Rx_Buffer is static for run-time optimalization */
static uint8_t USB_Rx_Buffer[BULK_DATA_SIZE];
uint16_t USB_Rx_Cnt;
uint16_t byte_counter;
blt_bool result;
/* Get the received data buffer and update the counter */
USB_Rx_Cnt = USB_SIL_Read(EP1_OUT, USB_Rx_Buffer);
/* USB data will be immediately processed, this allow next USB traffic being
* NAKed till the end of the USART Xfer
*/
for (byte_counter=0; byte_counter<USB_Rx_Cnt; byte_counter++)
{
/* add the data to the fifo */
result = UsbFifoMgrWrite(fifoPipeBulkOUT.handle, USB_Rx_Buffer[byte_counter]);
/* verify that the fifo wasn't full */
ASSERT_RT(result == BLT_TRUE);
}
/* Enable the reception of data on EP1 */
SetEPRxValid(ENDP1);
} /*** end of UsbReceivePipeBulkOUT ***/
/************************************************************************************//**
** \brief Converts Hex 32Bits value into char.
** \param value The hexadecimal value to convert.
** \param pbuf Pointer to where the resulting string should be stored.
** \param len Number of characters to convert.
** \return none.
**
****************************************************************************************/
static void IntToUnicode(blt_int32u value , blt_int8u *pbuf , blt_int8u len)
{
blt_int8u idx = 0;
for (idx = 0 ; idx < len ; idx ++)
{
if (((value >> 28)) < 0xA)
{
pbuf[ 2* idx] = (value >> 28) + '0';
}
else
{
pbuf[2* idx] = (value >> 28) + 'A' - 10;
}
value = value << 4;
pbuf[ 2* idx + 1] = 0;
}
} /*** end of IntToUnicode ***/
/************************************************************************************//**
** \brief Creates the serial number string descriptor.
** \return none.
**
****************************************************************************************/
void UsbGetSerialNum(void)
{
blt_int32u Device_Serial0, Device_Serial1, Device_Serial2;
Device_Serial0 = *(volatile blt_int32u *)(0x1FFFF7E8);
Device_Serial1 = *(volatile blt_int32u *)(0x1FFFF7EC);
Device_Serial2 = *(volatile blt_int32u *)(0x1FFFF7F0);
Device_Serial0 += Device_Serial2;
if (Device_Serial0 != 0)
{
IntToUnicode(Device_Serial0, &Bulk_StringSerial[2] , 8);
IntToUnicode(Device_Serial1, &Bulk_StringSerial[18], 4);
}
} /*** end of UsbGetSerialNum ***/
/************************************************************************************//**
** \brief Initializes the fifo manager. Each controlled fifo is assigned a
** unique handle, which is the same as its index into fifoCtrl[]. Each
** controlled fifo holds a pointer to the next free fifo control.
** For the last fifo in fifoCtrl[] this one is set to a null-pointer as
** an out of fifo control indicator. Function should be called once
** before any of the other fifo management functions are called.
** \return none.
**
****************************************************************************************/
static void UsbFifoMgrInit(void)
{
blt_int8u i;
tFifoCtrl *pbc1, *pbc2;
pbc1 = &fifoCtrl[0];
pbc2 = &fifoCtrl[1];
/* assign fifo handles and pointer to next free fifo */
for (i = 0; i < (FIFO_MAX_BUFFERS - 1); i++)
{
pbc1->handle = i;
pbc1->fifoctrlptr = pbc2;
pbc1++;
pbc2++;
}
/* initialize handle for the last one and use null-pointer for the next free fifo */
pbc1->handle = i;
pbc1->fifoctrlptr = (tFifoCtrl *)0;
fifoCtrlFree = &fifoCtrl[0];
} /*** end of UsbFifoMgrInit ***/
/************************************************************************************//**
** \brief Places a data storage array under fifo management control. A handle
** for identifying the fifo in subsequent fifo management function
** calls is returned, if successful.
** \param buffer Pointer to the first element in the data storage fifo.
** \param length Maximum number of data elements that can be stored in the fifo.
** \return Fifo handle if successfull, or FIFO_ERR_INVALID_HANDLE.
**
****************************************************************************************/
static blt_int8u UsbFifoMgrCreate(blt_int8u *buffer, blt_int8u length)
{
tFifoCtrl *pbc;
/* first determine if these is still a free fifo control available */
if (fifoCtrlFree == (tFifoCtrl *)0)
{
return FIFO_ERR_INVALID_HANDLE;
}
/* store pointer to free fifo and update pointer to next free one */
pbc = fifoCtrlFree;
fifoCtrlFree = pbc->fifoctrlptr;
/* initialize the buffer control */
pbc->length = length;
pbc->readptr = buffer;
pbc->writeptr = buffer;
pbc->entries = 0;
pbc->startptr = buffer;
pbc->endptr = (blt_int8u *)(buffer + length - 1);
/* return the handle to the successfully created fifo control */
return pbc->handle;
} /*** end of UsbFifoMgrCreate ***/
/************************************************************************************//**
** \brief Stores data in the fifo.
** \param handle Identifies the fifo to write data to.
** \param data Pointer to the data that is to be written to the fifo.
** \return BLT_TRUE if the data was successfully stored in the fifo, BLT_FALSE
** otherwise.
**
****************************************************************************************/
static blt_bool UsbFifoMgrWrite(blt_int8u handle, blt_int8u data)
{
/* check the validity of the handle parameter */
ASSERT_RT(handle < FIFO_MAX_BUFFERS);
/* check if fifo is full */
if (fifoCtrl[handle].entries == fifoCtrl[handle].length)
{
return BLT_FALSE;
}
/* copy data to fifo */
*fifoCtrl[handle].writeptr = data;
/* data written so update number of entries */
fifoCtrl[handle].entries++;
/* update write pointer */
fifoCtrl[handle].writeptr++;
/* check end of fifo */
if (fifoCtrl[handle].writeptr > fifoCtrl[handle].endptr)
{
/* set write pointer to start of the cyclic fifo */
fifoCtrl[handle].writeptr = fifoCtrl[handle].startptr;
}
/* still here so all is okay */
return BLT_TRUE;
} /*** end of UsbFifoMgrWrite ***/
/************************************************************************************//**
** \brief Retrieves data from the fifo.
** \param handle Identifies the fifo to read data from.
** \param data Pointer to where the read data is to be stored.
** \return BLT_TRUE if the data was successfully read from the fifo, BLT_FALSE
** otherwise.
**
****************************************************************************************/
static blt_bool UsbFifoMgrRead(blt_int8u handle, blt_int8u *data)
{
/* check the validity of the handle parameter */
ASSERT_RT(handle < FIFO_MAX_BUFFERS);
/* check if fifo is empty */
if (fifoCtrl[handle].entries == 0)
{
return BLT_FALSE;
}
/* read the data */
*data = *fifoCtrl[handle].readptr;
/* data read so update number of entries */
fifoCtrl[handle].entries--;
/* update read pointer */
fifoCtrl[handle].readptr++;
/* check end of fifo */
if (fifoCtrl[handle].readptr > fifoCtrl[handle].endptr)
{
/* set read pointer to start of the cyclic fifo */
fifoCtrl[handle].readptr = fifoCtrl[handle].startptr;
}
/* still here so all is good */
return BLT_TRUE;
} /*** end of UsbFifoMgrRead ***/
/************************************************************************************//**
** \brief Returns the number of data entries currently present in the fifo.
** \param handle Identifies the fifo that is to be scanned.
** \return Number of data entries in the fifo if successful, otherwise 0.
**
****************************************************************************************/
static blt_int8u UsbFifoMgrScan(blt_int8u handle)
{
/* check the validity of the handle parameter */
ASSERT_RT(handle < FIFO_MAX_BUFFERS);
/* read and return the number of data entries */
return fifoCtrl[handle].entries;
} /*** end of UsbFifoMgrScan ***/
#endif /* BOOT_COM_USB_ENABLE > 0 */
/*********************************** end of usb.c **************************************/
Reference in New Issue View Git Blame Copy Permalink