openwrt/target/linux/ramips/dts/WHR-1166D.dts

143 lines
2.3 KiB
Plaintext
Raw Normal View History

/dts-v1/;
/include/ "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
model = "Buffalo WHR-1166D";
palmbus@10000000 {
gpio2: gpio@660 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "en25q64";
reg = <0 0>;
linux,modalias = "m25p80", "mx25l6405d";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xeb0000>;
};
partition@e00000 {
label = "usercfg";
reg = <0xe00000 0x100000>;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
ralink,port-map = "llllw";
};
gsw@10110000 {
ralink,port4 = "ephy";
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
pcie@10140000 {
status = "okay";
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "buffalo:red:power";
gpios = <&gpio0 7 1>;
};
status {
label = "buffalo:green:status";
gpios = <&gpio0 8 1>;
};
power2 {
label = "buffalo:green:power";
gpios = <&gpio0 9 1>;
};
status2 {
label = "buffalo:orange:status";
gpios = <&gpio0 10 1>;
};
internet {
label = "buffalo:green:internet";
gpios = <&gpio2 17 1>;
};
router {
label = "buffalo:green:router";
gpios = <&gpio2 18 1>;
};
router2 {
label = "buffalo:orange:router";
gpios = <&gpio2 19 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
s1 {
label = "reset";
gpios = <&gpio2 12 1>;
linux,code = <0x100>;
};
s2 {
label = "aoss";
gpios = <&gpio2 13 1>;
linux,code = <0x101>;
};
s3 {
label = "ap";
gpios = <&gpio2 14 1>;
linux,code = <0x102>;
};
s4 {
label = "bridge";
gpios = <&gpio2 15 1>;
linux,code = <0x103>;
};
};
};