Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42553
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42554 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42457
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42475 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42460
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42461 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42456
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42458 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42453
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42454 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42443
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42444 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r42437
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42438 3c298f89-4303-0410-b956-a3cf2f4a3e73
While the AR9331 has a gigabit MAC towards the internal switch, the
integrated PHYs however are only 100-base-tx capable. The existing code
however advertieses gigabit capability in the link status word. If you
attach such a PHY to a gigabit capable switch on the remote end, with
some probability it attempts to negotiate gigabit and fails, falling
baco to the AR9331 assuming a 10mbit half-duplex link. This has been
observed quite frequently with the Carambola2 and gigabit capable
switches.
In ath79_register_eth(), "pdata->has_gbit = 1;" is set unconditionally
for both AR9331 ethernet ports. This is most likely wrong. Despite the
two MAC IP cores being gigabit MACs, the MAC for eth1 is connected to a
100base-T PHY via MII. The has_gbit attribute is used in the ethernet
driver to determine the supported link modes.
So either pdata->has_gbit is not set to 1 anymore, or the ethernet
driver needs to be modified to determine the advertised link code word
on another criteria than pdata->has_gbit. This patch implements the
former solution.
Signed-off-by: Harald Welte <laforge@gnumonks.org>
Backport of r42432
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42434 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42419
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42420 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42405
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42406 3c298f89-4303-0410-b956-a3cf2f4a3e73
On brcm47xx (Huawei E970), I noticed that sysupgrade now tries to flash trx images which don't fit into the flash, resulting in non-booting system.
I found that mtd does trx size checking only when flashing to a partition called "linux". This patch changes this to be "firmware".
This matches the following patch which changed partition name in bcm47xxpart.c driver to "firmware":
commit 86b4d5ef68ca77ff6724ebb9bddd6b93239c87fc
Author: hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Sun Dec 1 16:32:32 2013 +0000
brcm47xx: use "firmware" partition name
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r38973
Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
Backport of r42403
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42404 3c298f89-4303-0410-b956-a3cf2f4a3e73
The cns3xxx uses irq61 for pcie0_intr which in the case of a PCIe-to-PCI
bridge ends up combining INTA/B/C/D on a single ARM CPU interrupt. This is
not optimal when you have multiple cores. To overcome this limitation an
enhancement was made on newer Laguna PCB's that support miniPCI cards
to route the INTA/B/C/D signals to unique external ARM CPU interrupts which
can help balance CPU core utilization and in some cases increase overall
system performance or responsiveness.
For more details see:
http://trac.gateworks.com/wiki/multicoreprocessing#PCIInterruptsteering
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Backport of r42400
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42402 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42397
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42398 3c298f89-4303-0410-b956-a3cf2f4a3e73
Switch in Edimax 3G-6200n also require full switch reset, not only vlan definitions. Tested on Edimax 3G-6200n.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Backport of r42194
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42395 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Backport of r42130
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42393 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r42321
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42391 3c298f89-4303-0410-b956-a3cf2f4a3e73
Use an if/else statement to cover the two different syntaxes. Add
comments explaining what the end results should look like.
This patch should not change the script's output.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Backport of r42320
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42390 3c298f89-4303-0410-b956-a3cf2f4a3e73
An entry like this in /etc/config/dhcp:
config 'host'
option 'name' 'pc2'
option 'ip' '192.168.100.56'
option 'dns' '1'
results in a /tmp/hosts/dhcp entry that looks like this:
192.168.100.56 .lan
Obviously it should say "pc2.lan".
This happens because $name is set to "" in order to support the MAC-less
syntax: "--dhcp-host=lap,192.168.0.199". Fix this by reordering the
operations. Also, refuse to add a DNS entry if the hostname or IP is
missing.
Fixes#17683
Reported-by: Kostas Papadopoulos <kpapad75@travelguide.gr>
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Backport of r42319
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42389 3c298f89-4303-0410-b956-a3cf2f4a3e73
LuCI creates "domain" UCI config sections, which the dnsmasq init file
then, currently, translates into "address" config lines. This is not
the correct usage of "address" (see r36943), and also causes rDNS
records to not be created. This patches dnsmasq.init to utilize the
additional hosts file introduced in r40799 for such domain names,
resolving both issues.
Signed-off-by: Tyler Fenby <tylerf@securecominc.com>
Backport of r42318
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42388 3c298f89-4303-0410-b956-a3cf2f4a3e73
The bb-rc3 image for the BTHOMEHUBV2B is too big for its
mtd partition. This patch corrects the partition sizes in
the device tree. This patch should really go in before
bb-final, otherwise the BTHOMEHUBV2B images won't be useable.
I do apologise for not spotting this straight away.
Many thanks,
Ben
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
Backport of r42316
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42386 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r42293
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42385 3c298f89-4303-0410-b956-a3cf2f4a3e73
the ohci phy was not reset properly
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r42290
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42384 3c298f89-4303-0410-b956-a3cf2f4a3e73
fix the default package selection
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r42289
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42383 3c298f89-4303-0410-b956-a3cf2f4a3e73
somebody started to set a function returncode in the validation
stuff and everybody copies it, e.g.
myfunction()
{
fire_command
return $?
}
a function automatically returns with the last returncode,
so we can safely remove the command 'return $?'. reference:
http://tldp.org/LDP/abs/html/exit-status.html
"The last command executed in the function or script determines the exit status."
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
Backport of r42278
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42379 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch enables the second SPI as spidev and also fixes some typos.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Backport of r42277
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42378 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch adds support for setting SPI_CS1 as Chip Select, Watchdog reset output and GPIO#27.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Backport of r41938
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42377 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is based and tested on VoCore Alpha, but other stuff like status/eth LEDs are present on the final board revision + VoDock.
All GPIOs are exported, except spi/i2c.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Backport of r41939
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42376 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is based on Jon Smirl's patch with the following changes:
- Set CS polarity as low by default.
- Add support for changing CS polarity.
- Add support for changing LSB/MSB.
- Add support for changing SPI mode.
- Fix indentations.
I tested it on a VoCore. Works fine connected to a second flash, but fails to detect MMC/SD cards due to SPI clock speed.
Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Backport of r42276
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42375 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r42230
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42373 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Nicolas Thill <nico@openwrt.org>
Backport of r42229
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42372 3c298f89-4303-0410-b956-a3cf2f4a3e73
There is a group of devices that lzma-loader doesn't work with. They
simply hang at "Starting program at 0x80001000" which is really hard to
debug and we didn't find any solution for this for years.
Broadcom doesn't use lzma-loader on these devices anyway. They decided
to drop lzma-loader and use less optimal LZMA compression that can be
handled by CFE itself (it doesn't use dictionary).
So support these devices we will need kernel compressed with different
parameters and trx without a loader.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r42205
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42371 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch adds support for the Omnima MiniPlug RT5350 based board, 8MB SPI flash
Signed-off-by: Ivan Ignjatic<ivan@omnima.co.uk>
Backport of r42200
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42370 3c298f89-4303-0410-b956-a3cf2f4a3e73
Currently, any package that uses host compile and depends on
libgmp.so will fail. This is because gmp is not compile for
host machine. So, staging_dir/host has only static lib for gmp
$ ls staging_dir/host/lib/libgmp* -1
staging_dir/host/lib/libgmp.a
staging_dir/host/lib/libgmp.la
staging_dir/host/lib/libgmpxx.a
staging_dir/host/lib/libgmpxx.la
Addind host compile in gmp, the dependent package can use:
PKG_BUILD_DEPENDS:=gmp/host
That will compile gmp to staging_dir/host with *.so files
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Backport of r42196
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42369 3c298f89-4303-0410-b956-a3cf2f4a3e73
Patch to BusyBox Makefile to fix linker errors when PAM support is enabled by
CONFIG_BUSYBOX_CONFIG_PAM=y. Typical errors include:
login.c:(.text.login_main+0x122): undefined reference to `pam_start'
Signed-off-by: Stephen Parry <sgparry@mainscreen.com>
Backport of r42195
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42368 3c298f89-4303-0410-b956-a3cf2f4a3e73
This sets the MAC address of the WLAN interface to the "official" primary MAC
address (the one on the label under the devices, and the one used with the stock
firmware). The MAC address used so far (primary-1) isn't even used at all with
the stock firmware, which sets (primary) on LAN and WLAN and (primary+1) on the
WAN interface (like OpenWrt does with this patch).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Backport of r42193
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42367 3c298f89-4303-0410-b956-a3cf2f4a3e73
nbd
blogic
cyrus