Alexander Couzens
68ce59ad6f
ar71xx/sysmocom: migrate led red:eth0 to red:system
...
Before the red:wlan led was used as system led while booting.
2015-07-21 10:58:10 +02:00
Alexander Couzens
ce76671a16
ar71xx/sysmocom: add admin port to sysmocom-sob-jb02v3
2015-07-20 15:04:06 +02:00
Alexander Couzens
4e8405857a
ag71xx_ar7240/export_netdevs: check if the phy is already checked early
...
Don't create a netdev for phy which are already attached to a netdev.
This replace kernel errors:
(null): PHY already attached
phy attach failed 4 with err -16
With:
Phy on addr 0x4 is already attached. Not creating a phy device for it.
2015-07-20 11:55:17 +02:00
Alexander Couzens
cb5ddd5168
Merge remote-tracking branch 'upstream_openwrt/master'
...
* openssl update
* hostapd: fix remote denial of service vulnerability in WMM action frame parsing
* kernel: remove the netfilter optimization that skips the filter table, it has caused too many issues
* ath9k: fix a beacon enable handling bug
* minor bugfixes and board backports
2015-07-19 19:59:25 +02:00
Alexander Couzens
641ec9db23
ar71xx/sysmocom: register boot counter for all board
...
the bootcounter was only registered for ap2
2015-07-19 19:45:43 +02:00
Alexander Couzens
54a53a37a0
ar71xx/sysmocom: drop cb2 postfix from sob-jb02 image name to match board_name
...
The sysmocom flasher require images which are named exact as the board_name variable
2015-07-07 16:42:24 +02:00
Alexander Couzens
1759bc10df
ar71xx/sysmocom: rename image filename to be consistant with board name
...
sed -i 's/,sysmo-sob-/,-sysmocom-sob-/g' target/linux/ar71xx/image/Makefile
2015-07-07 14:57:22 +02:00
Alexander Couzens
9e00cdf1ae
ar71xx/sysmocom: register boot counter as platform_device
2015-07-07 14:57:22 +02:00
Alexander Couzens
dca38a219e
ar71xx/sysmocom: remove skw postfix from jb02v3
2015-06-26 18:27:31 +02:00
Alexander Couzens
cfcf15fc58
ar71xx: fix mismatch between mips machine and give machine from cmdline for SYSMOSOBJB02V3
2015-06-26 13:56:30 +02:00
Alexander Couzens
3426d18da0
ar71xx/sysmocom: disable RTS CTS pins on all boards
2015-06-09 16:11:16 +02:00
Alexander Couzens
1e3af1cbdf
ar71xx/sysmocom: use correct gpio name for ar933x devices
...
Wrong gpio names were used in gpio_function_disable. But likely they had
the same value.
2015-06-09 16:09:01 +02:00
Alexander Couzens
2375915d9f
ar71xx/sysmocom: fix eeprom type - 24c02 is assembled
2015-06-09 16:06:27 +02:00
Alexander Couzens
820cfa16a7
linux: implement regdump of phys via debugfs
...
Allow a regdump of the phy register space via debugfs.
hexdump /sys/kernel/debug/mdio_bus/ag71xx_mdio/ag71xx-mdio.1:00/regdump
2015-05-26 18:53:07 +02:00
Alexander Couzens
fe3973c6b1
ar71xx/sysmocom: rename machine id support patch
2015-05-20 12:58:54 +02:00
Alexander Couzens
5f90cba27a
ar71xx: add size depend partition generation
...
Partitions are generated depending on the size of the flash chip.
The layout on which the partition based is hardcoded into the module.
Using this new partition layout it makes possible to have 8mb and 16mb within
the same board definition.
2015-05-20 12:58:53 +02:00
Alexander Couzens
acd543359d
ar71xx/sysmocom: set art table even for 8mb devices to the last sector of 16mb
...
This is possible because the memory will be wrapped around when using
the mapped spi memory space.
2015-05-18 22:32:28 +02:00
Alexander Couzens
f79215acdd
ar71xx/sysmocom: build image for jb02v3-skw when using sysmocom profile
2015-05-13 16:56:06 +02:00
Alexander Couzens
fb426b964f
ar71xx/sysmocom: add support for jb02v3
2015-05-12 17:46:02 +02:00
Alexander Couzens
063fd0f34e
ar71xx/sysmocom: rename jb02 image to jb02v2-cb2
2015-05-12 16:37:52 +02:00
Alexander Couzens
8175affc55
linux: move net phy backport patch into the correct directory
2015-05-09 11:51:55 +02:00
Alexander Couzens
21f5cd2f8a
RFC: ag71xx_ar7240 add new switch func export_netdevs
...
export_netdevs will export a net device for every port. These netdev represent a port
with out traffic.
When such a device is broght down via ifconfig the port is shutdown and
vice versa. Carrier sense is working too and ethtool can be used to
control advertise, autoneg, ...
2015-05-09 11:39:10 +02:00
Alexander Couzens
af54c0148b
linux: add net phy backports for phy port patch
2015-05-09 11:09:49 +02:00
Alexander Couzens
745887a828
linux: backport support for thermal sensor lm75b
...
It's included in generic lm75 driver.
2015-05-07 20:49:16 +02:00
Alexander Couzens
22bd48f95c
linux: backport support for light sensor APDS9300 using iio framework
2015-05-07 20:49:06 +02:00
Alexander Couzens
607bcc2386
ar71xx/sysmocom: register i2c bus + devices
2015-05-07 20:46:33 +02:00
Alexander Couzens
1755472d2e
ar71xx/sysmocom: switch mac address of eth0 + eth1
...
The lowest mac address should assigned to the switch
2015-04-06 20:09:06 +02:00
Alexander Couzens
df9021e78b
ar71xx/sysmocom: fix default state of wlan led
...
Because of using the wlan led as diag led this led will remain on even when the wifi is off
2015-04-04 20:18:16 +02:00
Alexander Couzens
78eabd2db9
ar71xx/sysmocom/ap2: set a static ip to the local port (wan/top)
2015-04-04 18:55:09 +02:00
Alexander Couzens
89ace1cf94
ar71xx/sysmocom: set wlan led as diag led for recovery
2015-04-04 17:08:10 +02:00
Alexander Couzens
eb57ede2dd
ar71xx/sysmocom: enable sysupgrade on all boards
2015-04-04 17:08:09 +02:00
Alexander Couzens
7cfcabc7ae
ar71xx/sysmocom/sob-jb02: fix led color - both leds are red
2015-04-04 17:08:09 +02:00
Alexander Couzens
7ddeeba72a
ar71xx: ap1 + jb02: fix mac address
2015-03-17 18:32:40 +01:00
nbd
64ae631f20
kernel: remove the netfilter optimization that skips the filter table, it has caused too many issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r44873
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@44874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-17 17:15:15 +00:00
Alexander Couzens
b240f36506
ar71xx/ap1 ap2: replace default network configuration with eth0.6 = mgmt
2015-03-17 14:07:05 +01:00
Alexander Couzens
2739f09d07
ar71xx/jb02: replace default network configuration with eth0.6 = mgmt
2015-03-17 12:48:27 +01:00
Alexander Couzens
64caabe995
ar71xx/sysmocom: move local admin port out of the switch
2015-03-10 17:05:56 +01:00
Alexander Couzens
79322fd883
ar71xx/sysmocom: fix ap2 calibration data location
...
ap2 has only 8 MB SPI flash
2015-03-10 15:27:30 +01:00
Alexander Couzens
aa67259629
ar71xx/sysmocom: fix ethernet support of sysmo-ap1 & sysmo-jb02
...
wrong ethernet mac was used
2015-03-10 15:25:44 +01:00
Alexander Couzens
e25ed2fede
ar71xx/sysmocom: fix MAC address offset usage.
...
ath79_init_mac(*dest, *src, offset): The offset was misused.
Offset is added to the MAC address value.
2015-03-10 15:25:44 +01:00
Alexander Couzens
ebeadd286c
ar71xx/sysmocom: move network configuration out of _common()
...
The sysmo boards differs to much - put it into board configuration
to improve readability.
2015-03-10 15:25:44 +01:00
blogic
12c281e5eb
ar71xx: Fix LED polarity for the TP-LINK TL-MR13U.
...
Please also backport to Barrier Breaker (this same patch applies there too).
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@44645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-10 13:26:19 +00:00
blogic
26093e7239
Backport: ar71xx: Fix board detection for the TP-LINK TL-MR13U.
...
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@44644 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-10 13:26:15 +00:00
Harald Welte
931bb20e63
sob-ap2: Enable GPIO26 + GPIO27 as GPIO, not MDIO
2015-02-21 19:58:58 +01:00
Harald Welte
e67d0c78a6
initial support of the new sysmocom SOB-AP2 (1xPD/3xPSE)
...
Port0 is uplink/PD port (IDC)
Port1-3 are downink/PSE ports (IDC)
Port4 is admin port (RJ45)
* we only have 8 MByte flash
* we use the hardware LEDs for switch ports 1-5
The image boots and is able to establish links on both eth0 and eth1.
However, the LED support is not yet working as expected.
2015-02-21 11:34:52 +01:00
Alexander Couzens
59f13eb186
ar71xx/sysmocom: fix JB02 mips machine
...
setup function name wasn't renamed when mach file split up for both boards
2015-02-18 03:15:47 +01:00
Alexander Couzens
fecdb0e772
ar71xx/sysmocom: fix build of sysmocom board
...
sysmocom boards wasn't build because they aren't included by a Makefile
2015-02-18 03:15:41 +01:00
Alexander Couzens
6547fca3bd
ar71xx/sysmocom: use config symbol ATH79_MACH_SYSMOCOM for all sysmocom boards
2015-02-18 03:14:42 +01:00
Alexander Couzens
7c5dcd7b26
ar71xx/sysmocom: fix sysmocom miswritten mach type in mach-sysmocom.c
2015-02-18 01:54:24 +01:00
blogic
4ae7fc39a5
BB:ramips:Kingston MLW221 cleanup
...
MLW221 dts use tabs NOT spaces.
Cleanup uci-defaults and diag.sh
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@44382 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-02-11 05:55:18 +00:00