Patch to BusyBox Makefile to fix linker errors when PAM support is enabled by
CONFIG_BUSYBOX_CONFIG_PAM=y. Typical errors include:
login.c:(.text.login_main+0x122): undefined reference to `pam_start'
Signed-off-by: Stephen Parry <sgparry@mainscreen.com>
Backport of r42195
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42368 3c298f89-4303-0410-b956-a3cf2f4a3e73
This sets the MAC address of the WLAN interface to the "official" primary MAC
address (the one on the label under the devices, and the one used with the stock
firmware). The MAC address used so far (primary-1) isn't even used at all with
the stock firmware, which sets (primary) on LAN and WLAN and (primary+1) on the
WAN interface (like OpenWrt does with this patch).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Backport of r42193
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42367 3c298f89-4303-0410-b956-a3cf2f4a3e73
The OpenMesh MR600(v1) can only enable the 2.4G WiFi PHY LED through the
mini-PCIe device. Not configuring the LED pin inside the platform data
makes it impossible to configure it through any standard OpenWrt tool.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
Backport of r42184
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42363 3c298f89-4303-0410-b956-a3cf2f4a3e73
- use full board name
- rename uboot-env partition
- add dsl_fw partition
- remove unneeded pinmux groups
- move gigabit ethernet to LAN
- load mac address from mtd
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Backport of r42180
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42359 3c298f89-4303-0410-b956-a3cf2f4a3e73
Due to TCP connections not working when VLAN is disabled, this is
needed to get failsafe functional.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Backport of r42179
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42358 3c298f89-4303-0410-b956-a3cf2f4a3e73
According to the pcb tracing results[1] by anton.rad[2] MPR-A1s expose
6 unused GPIOs, only one of them working as configured in the current
DTS. This patch enables GPIO22-26.
Tested on hardware.
[1] http://i.imgur.com/kHVW2Ox.jpg
[2] https://forum.openwrt.org/viewtopic.php?pid=222698#p222698
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Backport of r42178
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42357 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Steven Barth <steven@midlink.org>
Backport of r42158
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42355 3c298f89-4303-0410-b956-a3cf2f4a3e73
Utilize the new selective conntrack flushing facility to clear
out active conntrack entries referring to old IP addresses after
a firewall reload.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r42114
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42353 3c298f89-4303-0410-b956-a3cf2f4a3e73
Enable the separate feed repositories by default to align custom builds with the repositories
available on the snapshot download server.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r42112
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42352 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Luka Perkov <luka@openwrt.org>
Backport of r42111
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42351 3c298f89-4303-0410-b956-a3cf2f4a3e73
This adds default tx and rx antennas, so that LuCI shows automatic as the default radio option for the antennas.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Backport of r42085
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42350 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42345
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42347 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42344
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42346 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42339
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42340 3c298f89-4303-0410-b956-a3cf2f4a3e73
Backport of r42337.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42338 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42329
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42330 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42322
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42323 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42309
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42311 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42308
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42310 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42302
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42303 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42300
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42301 3c298f89-4303-0410-b956-a3cf2f4a3e73
A quite frequent problem after sysupgrading from an older, SSL enabled build
is that ustream-ssl is not installed so uhttpd fails to come up again due to
https listening directives in the preserved configuration.
Skip key/cert and ssl listen options when libustream-ssl.so is not present.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r42284
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42286 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42257
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42258 3c298f89-4303-0410-b956-a3cf2f4a3e73
Disable MIPS16 to prevent it negatively affecting performance.
Observed was a increase of connection delay from ~6 to ~11 seconds
and a reduction of scp speed from 1.1MB/s to 710kB/s on brcm63xx.
Fixes#15209.
Backport of r42250.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42255 3c298f89-4303-0410-b956-a3cf2f4a3e73
we should check for ssb here.
backport of r42164.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42166 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is a bug revealed in r41830.
First, the static variable `char nif[IFNAMSIZ]` of nl80211_phy2ifname()
would be zeroed out if the argument is "wlan0" or the like. This will
happen in the following call stack.
nl80211_get_scanlist("radio0", buf, len);
nl80211_phy2ifname("radio0") // return static var nif with content "wlan0"
nl80211_get_scanlist(nif, buf, len); // tail call
nl80211_get_mode(nif);
nl80211_phy2ifname(nif); // zero out nif
Later we try nl80211_ifadd("") which was supposed to create interface
"tmp.", but that won't happen because nl80211_msg() will put an invalid
ifidx 0 to the nlmsg.
Then iwinfo_ifup() and iwinfo_ifdown() would fail and happily
nl80211_get_scanlist() returned 0 and left *len undefined.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Backport of r42151
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42152 3c298f89-4303-0410-b956-a3cf2f4a3e73
When looking for the first ipaddr also consider the current prefix just
like network_get_ipaddrs6 does. If ipv6-address was empty the function
did not return the first ipaddr even if the list was non-empty.
fixes commit 83e9122f88a002871d5cdf421cf6aa6052b7e006
Signed-off-by: Henning Schild <henning@hennsch.de>
Backport of r42139
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42140 3c298f89-4303-0410-b956-a3cf2f4a3e73