openwrt/target/linux/ramips/dts/DAP-1350.dts

120 lines
1.8 KiB
Plaintext

/dts-v1/;
/include/ "rt3050.dtsi"
/ {
compatible = "DAP-1350", "ralink,rt3052-soc";
model = "D-Link DAP-1350";
chosen {
bootargs = "console=ttyS0,115200";
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
ralink,function = "gpio";
};
};
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
devdata: partition@30000 {
label = "devdata";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "devconf";
reg = <0x40000 0x30000>;
read-only;
};
partition@70000 {
label = "devlang";
reg = <0x70000 0x40000>;
read-only;
};
partition@b0000 {
label = "firmware";
reg = <0xb0000 0x750000>;
};
};
ethernet@10100000 {
mtd-mac-address = <&devdata 0x2e>;
};
esw@10110000 {
ralink,portmap = <0x2f>;
};
wmac@10180000 {
ralink,mtd-eeprom = <&devdata 0>;
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "d-link:blue:power";
gpios = <&gpio0 8 1>;
};
power2 {
label = "d-link:red:power";
gpios = <&gpio0 9 1>;
};
wps {
label = "d-link:blue:wps";
gpios = <&gpio0 14 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
rt {
label = "rt";
gpios = <&gpio0 11 1>;
linux,code = <0x100>;
};
ap {
label = "ap";
gpios = <&gpio0 7 1>;
linux,code = <0x101>;
};
};
otg@101c0000 {
status = "okay";
};
};