* [PFCP] Fix trailing whitespace
* [PFCP] Fix wrong endianess enc of some URR values
u32 tlvs are already converted to big endian automatically. Manually
doing so ends up in double conversion and hence in wrong endianness
being sent over the wire.
Similar issue was also fixed recently in the PFCP decoding path.
Related: https://github.com/open5gs/open5gs/issues/1349
mouse07410/asn1c#89
Found when tried to encode NGAP_CauseRadioNetwork_release_due_to_pre_emption
mouse07410/asn1c#90
Found when tried to decode messages encoded with newer schema
* Fix conversion from IPFilterRule to packet filter
As per 3GPP TS 24.008, following Packet filter component type identifier
are not supported on the LTE pre release-11 UEs:
IPv4 local address type
IPv6 remote address/prefix length type
IPv6 local address/prefix length type
And,
IPv6 remote address/prefix length type and
IPv6 local address/prefix length type shall be used when both MS and
Network support Local Address in TFTs.
This commit add logic to omit adding local address in packet filters
for compatibility with pre-release LTE 11 devices. The following parameter
could be used to toggle omit/no to omit behavior.
parameter:
no_ipv4v6_local_addr_in_packet_filter: <true/false>
* Remove logic of supporting pre-release LTE 11 devices in PCRF
According to TS 29.060 they should be added.
section 7.6:
"if it is a request for which a response has been defined, shall be sent
with a Sequence Number"
section 8.2:
"""
Sequence number flag (S) shall be set to "1"
...
For GTP-C messages not having a defined response message for a request
message, i.e. for messages Version Not Supported, RAN Information Relay
and Supported Extension Headers Notification, the Sequence Number shall
be ignored by the receiver.
"
It seems to be actually mandatory in GGSN->SGN directon, though it is
ignored in Release99 upwards. Let's hardcode it to 0 for now, should be
fine in the majority of cases.
* [CORE] tlv: Store mode in ogs_tlv_t
This allows specifying the format of the IE for each individual IE,
hence allowing messages containing IEs formatted in different ways.
This is needed in order to support parsing GTPv1-C, since messages
contain IEs with different structure (TLV vs TV). Hence, this is a
preparation patch to add support for parsing TVs in ogs-tlv.c/.h.
* [CORE] tlv: Support parsing msg with both TLV and TV in it
IEs of type TV are sometimes used in GTPv1-C. Current tlv parser/builder
doesn't provide with ways to parse messages which contain TV formatted
IEs. This patch adds the relevant types and ways to encode/decode them.
Furthermore, the current parser/builder allows parsing/building messages
containing the exact same format in all its IEs. A new parser function
is added which allows parsing messages of different types (TV, TLV)
mixed in the same message. In order to be able to do so, it uses the
general msg_mode passed to it in order to know the general TLV format
(in essence, the length of the Tag field, and also the length of the
Length field if applicable each IE).
Looking up the instance in the TLV description is left undone and
hadcoded to 0, since the only user so far requiring this API is GTPv1-C,
which has no instances.
* [CORE] tlv: Support repeated tag+instance parsing TLV message
In GTPv2C, repeated IEs (same tag) are easily differentiated by the
Instance byte, which provides info to match different decoded
structures. In GTPv1C though, there's no Instance byte, and we still
encounter repeated IEs (like GSN Address in Create PDP Context Request).
Hence, the TLV decoder needs to be updated to track count of IEs found
(identified by tag+instance, where instance is always 0 in GTPv1C) and
get the proper description index + offset into the decoded structure.
* [GTP]: Move GTPv2-C specifics to its own libgtp subdir
This will allow adding GTPv1-C code by the side. Most GTPv2 code is left
in this patch as "gtp" instead of renaming it to "gtp2" in order to
avoid massive changes. It can be done at a later stage if wanted.
* [GTP] Support generating GTPv1-C messages
* [SMF] Add Gn interface support
This patch introduces GTPv1C support to open5gs-smfd. With it,
open5gs-becomes a GGSN too, where SGSN can connect to, hence supporting
GERAN and UTRAN networks.
* [GTP] xact: Fix trailing whitespace
* [GTP] xact: Avoid exporting internally used functions
This simplifies the API header hiding unneeded APIs from external
components, and lets the compiler further optimize by
marking the functions as static.
* [GTP] xact: Drop unused API ogs_gtp_xact_find
After making it static, it became clear to the compiler that this
function is not used anywhere, warning about it. Let's drop it.
* [SMF] Fix potential null pointer dereference
Pointer "sess" was first dereferenced and later on checked for nullness.
This is clearly wrong. Rearrange the code path to make sure the check is
done first, then dereferenced.
* gitignore: Add subprojects/libtins
* cosmetic: Fix whitespace
The network access mode of HSS has been changed to 0 (Packet and Circuit).
Versions of MME prior to v2.4.2 did not use this value. Open5GS set
the attach result of Attach Complete message as it is by looking
at the attach type of the Attach Request message.
Now, if the network access mode of HSS is set to 2 (Only Packet),
this value is affected by MME from v2.4.3. Regardless of the attach type
of the Attach Request, the MME will set EPS Only to the attach result
of Attach Complete.
3GPP TS 24.501 version 16.6.0 Release 16
4.4 NAS security
4.4.6 Protection of initial NAS signalling messages
1) the UE needs to send non-cleartext IEs in a REGISTRATION REQUEST
or SERVICE REQUEST message, the UE includes the entire REGISTRATION
REQUEST or SERVICE REQUEST message (i.e. containing both cleartext IEs
and non-cleartext IEs) in the NAS message container IE and shall cipher
the value part of the NAS message container IE. The UE shall then send
a REGISTRATION REQUEST or SERVICE REQUEST message containing
the cleartext IEs and the NAS message container IE;
As per RFC 4861 Router advertisement message
format, Source Address MUST be the link-local address
assigned to the interface from which this message is sent.
Since SMF was not sending it as per RFC, certain
phones were not completing the procedure of stateless
IPv6 address autoconfiguration mentioned in
3GPP TS 23.401 version 15.12.0 Release 15, section 5.3.1.2.2
When connecting to the UPF port for the PFCP protocol (8805) and sending
an association setup request followed by a session establishment request
with a PDI Network Instance set to ‘internet’, it causes a stack corruption
to occur.
So, ogs_fqdn_parse() fixed.
nas-common library includes libcrypt. However, SGW-C don't have to use
crypt library. As such, ogs_nas_plmn_id function was moved to
3gpp-core-types.[ch]
For more information,
$ ./install/bin/open5gs-sgwcd
./install/bin/open5gs-sgwcd: error while loading shared libraries: libogscrypt.so.2: cannot open shared object file: No such file or directory
$ ldd ./install/bin/open5gs-sgwcd
linux-vdso.so.1 (0x00007ffc749ad000)
libogsapp.so.2 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogsapp.so.2 (0x00007f1f92277000)
libogscore.so.2 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogscore.so.2 (0x00007f1f92240000)
libogsgtp.so.2 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogsgtp.so.2 (0x00007f1f921eb000)
libogsnas-common.so.2 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogsnas-common.so.2 (0x00007f1f921e5000)
libogspfcp.so.2 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogspfcp.so.2 (0x00007f1f92177000)
libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f1f92134000)
libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f1f91f42000)
libyaml-0.so.2 => /usr/lib/x86_64-linux-gnu/libyaml-0.so.2 (0x00007f1f91f20000)
libogscrypt.so.2 => not found
libogsipfw.so.2 => /home/acetcom/Documents/git/open5gs/install/lib/x86_64-linux-gnu/libogsipfw.so.2 (0x00007f1f91ef5000)
/lib64/ld-linux-x86-64.so.2 (0x00007f1f922b1000)
commit 183d8b8344122f25f77be79b1b698c71f48c1656
Author: Sukchan Lee <acetcom@gmail.com>
Date: Fri May 28 23:44:26 2021 +0900
[SMF] introduce new list API [#1019]
Sometimes we may need two lists for same node.
To do this, I created a new list API, and applied it this pull request.
All process will be forcely exited if it failed to encode the S1AP/NGAP/GTP/PFCP message. It is to make sure there was no problem with the encoding of open5gs.
Sukchan Lee
Pau Espin
Supreeth Herle
Julian Lemmerich
Mehmet Hakan Doğan
Balint Cristian
Umakant Kulkarni
Spencer Sevilla
Josh Bailey