2010-10-11 08:58:47 +00:00
|
|
|
/*
|
|
|
|
* (C) Copyright 2010 Juergen Beisert - Pengutronix
|
|
|
|
*
|
|
|
|
* This code was inspired by some patches made for u-boot covered by:
|
|
|
|
* (c) 2007 Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
* (C) Copyright 2009 Freescale Semiconductor, Inc.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Note: This is the driver for the debug UART. There is
|
|
|
|
* only one of these UARTs on the Freescale/SigmaTel parts
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <common.h>
|
|
|
|
#include <init.h>
|
|
|
|
#include <notifier.h>
|
|
|
|
#include <gpio.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <mach/imx-regs.h>
|
|
|
|
#include <mach/clock.h>
|
|
|
|
|
|
|
|
#define UARTDBGDR 0x00
|
|
|
|
#define UARTDBGFR 0x18
|
|
|
|
# define TXFF (1 << 5)
|
|
|
|
# define RXFE (1 << 4)
|
|
|
|
#define UARTDBGIBRD 0x24
|
|
|
|
#define UARTDBGFBRD 0x28
|
|
|
|
#define UARTDBGLCR_H 0x2c
|
|
|
|
# define WLEN8 (3 << 5)
|
|
|
|
# define WLEN7 (2 << 5)
|
|
|
|
# define WLEN6 (1 << 5)
|
|
|
|
# define WLEN5 (0 << 5)
|
|
|
|
# define FEN (1 << 4)
|
|
|
|
#define UARTDBGCR 0x30
|
|
|
|
# define UARTEN (1 << 0)
|
|
|
|
# define TXE (1 << 8)
|
|
|
|
# define RXE (1 << 9)
|
|
|
|
#define UARTDBGIMSC 0x38
|
|
|
|
|
|
|
|
struct stm_serial_local {
|
|
|
|
struct console_device cdev;
|
|
|
|
int baudrate;
|
|
|
|
struct notifier_block notify;
|
|
|
|
};
|
|
|
|
|
|
|
|
static void stm_serial_putc(struct console_device *cdev, char c)
|
|
|
|
{
|
|
|
|
struct device_d *dev = cdev->dev;
|
|
|
|
|
|
|
|
/* Wait for room in TX FIFO */
|
|
|
|
while (readl(dev->map_base + UARTDBGFR) & TXFF)
|
|
|
|
;
|
|
|
|
|
|
|
|
writel(c, dev->map_base + UARTDBGDR);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int stm_serial_tstc(struct console_device *cdev)
|
|
|
|
{
|
|
|
|
struct device_d *dev = cdev->dev;
|
|
|
|
|
|
|
|
/* Check if RX FIFO is not empty */
|
|
|
|
return !(readl(dev->map_base + UARTDBGFR) & RXFE);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int stm_serial_getc(struct console_device *cdev)
|
|
|
|
{
|
|
|
|
struct device_d *dev = cdev->dev;
|
|
|
|
|
|
|
|
/* Wait while TX FIFO is empty */
|
|
|
|
while (readl(dev->map_base + UARTDBGFR) & RXFE)
|
|
|
|
;
|
|
|
|
|
|
|
|
return readl(dev->map_base + UARTDBGDR) & 0xff;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void stm_serial_flush(struct console_device *cdev)
|
|
|
|
{
|
|
|
|
struct device_d *dev = cdev->dev;
|
|
|
|
|
|
|
|
/* Wait for TX FIFO empty */
|
|
|
|
while (readl(dev->map_base + UARTDBGFR) & TXFF)
|
|
|
|
;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int stm_serial_setbaudrate(struct console_device *cdev, int new_baudrate)
|
|
|
|
{
|
|
|
|
struct device_d *dev = cdev->dev;
|
|
|
|
struct stm_serial_local *local = container_of(cdev, struct stm_serial_local, cdev);
|
|
|
|
uint32_t cr, lcr_h, quot;
|
|
|
|
|
|
|
|
/* Disable everything */
|
|
|
|
cr = readl(dev->map_base + UARTDBGCR);
|
|
|
|
writel(0, dev->map_base + UARTDBGCR);
|
|
|
|
|
|
|
|
/* Calculate and set baudrate */
|
2010-12-13 10:53:26 +00:00
|
|
|
quot = (imx_get_xclk() * 4) / new_baudrate;
|
2010-10-11 08:58:47 +00:00
|
|
|
writel(quot & 0x3f, dev->map_base + UARTDBGFBRD);
|
|
|
|
writel(quot >> 6, dev->map_base + UARTDBGIBRD);
|
|
|
|
|
|
|
|
/* Set 8n1 mode, enable FIFOs */
|
|
|
|
lcr_h = WLEN8 | FEN;
|
|
|
|
writel(lcr_h, dev->map_base + UARTDBGLCR_H);
|
|
|
|
|
|
|
|
/* Re-enable debug UART */
|
|
|
|
writel(cr, dev->map_base + UARTDBGCR);
|
|
|
|
|
|
|
|
local->baudrate = new_baudrate;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int stm_clocksource_clock_change(struct notifier_block *nb, unsigned long event, void *data)
|
|
|
|
{
|
|
|
|
struct stm_serial_local *local = container_of(nb, struct stm_serial_local, notify);
|
|
|
|
|
|
|
|
return stm_serial_setbaudrate(&local->cdev, local->baudrate);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int stm_serial_init_port(struct console_device *cdev)
|
|
|
|
{
|
|
|
|
struct device_d *dev = cdev->dev;
|
|
|
|
|
|
|
|
/* Disable UART */
|
|
|
|
writel(0, dev->map_base + UARTDBGCR);
|
|
|
|
|
|
|
|
/* Mask interrupts */
|
|
|
|
writel(0, dev->map_base + UARTDBGIMSC);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct stm_serial_local stm_device = {
|
|
|
|
.cdev = {
|
|
|
|
.f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR,
|
|
|
|
.tstc = stm_serial_tstc,
|
|
|
|
.putc = stm_serial_putc,
|
|
|
|
.getc = stm_serial_getc,
|
|
|
|
.flush = stm_serial_flush,
|
|
|
|
.setbrg = stm_serial_setbaudrate,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static int stm_serial_probe(struct device_d *dev)
|
|
|
|
{
|
|
|
|
stm_device.cdev.dev = dev;
|
|
|
|
dev->type_data = &stm_device.cdev;
|
|
|
|
|
|
|
|
stm_serial_init_port(&stm_device.cdev);
|
|
|
|
stm_serial_setbaudrate(&stm_device.cdev, CONFIG_BAUDRATE);
|
|
|
|
|
|
|
|
/* Enable UART */
|
|
|
|
writel(TXE | RXE | UARTEN, dev->map_base + UARTDBGCR);
|
|
|
|
|
|
|
|
console_register(&stm_device.cdev);
|
|
|
|
stm_device.notify.notifier_call = stm_clocksource_clock_change;
|
|
|
|
clock_register_client(&stm_device.notify);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void stm_serial_remove(struct device_d *dev)
|
|
|
|
{
|
|
|
|
struct console_device *cdev = dev->type_data;
|
|
|
|
|
|
|
|
stm_serial_flush(cdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct driver_d stm_serial_driver = {
|
|
|
|
.name = "stm_serial",
|
|
|
|
.probe = stm_serial_probe,
|
|
|
|
.remove = stm_serial_remove,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int stm_serial_init(void)
|
|
|
|
{
|
|
|
|
register_driver(&stm_serial_driver);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
console_initcall(stm_serial_init);
|