sysmo-bts
/
barebox
9
0
Fork 0
Code Releases Activity
barebox/arch/arm/configs/highbank_defconfig

63 lines
1.4 KiB
Plaintext
Raw Normal View History

arm: add highbank support currently only tested under qemu qemu-system-arm -M highbank -nographic -m 4089 -kernel build/highbank/arch/arm/pbl/zbarebox -tftp "." -drive id=disk,if=ide,file=disk.img -device ide-drive,drive=disk,bus=ide.0 with: - timer (AMBA SP804) - uart (AMBA PL011) - gpio (AMBA PL061) - ahci - net (XGMAC) Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-13 10:06:42 +00:00
CONFIG_ARCH_HIGHBANK=y
CONFIG_AEABI=y
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
CONFIG_PBL_IMAGE=y
CONFIG_MMU=y
CONFIG_MALLOC_SIZE=0xa00000
CONFIG_MALLOC_TLSF=y
CONFIG_PROMPT="vexpress: "
CONFIG_LONGHELP=y
CONFIG_GLOB=y
CONFIG_HUSH_FANCY_PROMPT=y
CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
CONFIG_MENU=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/highbank/env"
CONFIG_CMD_EDIT=y
CONFIG_CMD_SLEEP=y
CONFIG_CMD_SAVEENV=y
CONFIG_CMD_EXPORT=y
CONFIG_CMD_PRINTENV=y
CONFIG_CMD_READLINE=y
CONFIG_CMD_MENU=y
CONFIG_CMD_MENU_MANAGEMENT=y
CONFIG_CMD_PASSWD=y
CONFIG_CMD_TFTP=y
CONFIG_CMD_ECHO_E=y
CONFIG_CMD_LOADB=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_BOOTM_SHOW_TYPE=y
CONFIG_CMD_BOOTM_VERBOSE=y
CONFIG_CMD_BOOTM_INITRD=y
CONFIG_CMD_BOOTM_OFTREE=y
CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
CONFIG_CMD_UIMAGE=y
# CONFIG_CMD_BOOTU is not set
CONFIG_CMD_RESET=y
highbank: add power off support Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-16 21:07:59 +00:00
CONFIG_CMD_POWEROFF=y
arm: add highbank support currently only tested under qemu qemu-system-arm -M highbank -nographic -m 4089 -kernel build/highbank/arch/arm/pbl/zbarebox -tftp "." -drive id=disk,if=ide,file=disk.img -device ide-drive,drive=disk,bus=ide.0 with: - timer (AMBA SP804) - uart (AMBA PL011) - gpio (AMBA PL061) - ahci - net (XGMAC) Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-13 10:06:42 +00:00
CONFIG_CMD_GO=y
CONFIG_CMD_OFTREE=y
highbank: use the provided dtb by the firmware to probe barebox device and mem size the dtb is at 0x1000 if no dtb present use C code device keep in C the timer/gpio/uart have a nice tree barebox 2013.02.0-00294-g6802ddf #124 Wed Feb 13 02:31:01 CST 2013 Board: Calxeda Highbank memory: ram0: 0xff900000@0x0 highbank: dtb probed memory size registered netconsole as cs1 malloc space: 0x03500000 -> 0x03efffff (size 10 MiB) Open /dev/env0 No such file or directory no valid environment found on /dev/env0. Using default environment running /env/bin/init... ahci ffe08000.sata: port 0: SATA link ok ahci ffe08000.sata: port 0: Spinning up device... ahci ffe08000.sata: port 0: ok. ahci ffe08000.sata: registered /dev/ata0 eth0: got preset MAC address: 52:54:00:12:34:56 eth1: got preset MAC address: 52:54:00:12:34:57 Hit any key to stop autoboot: 3 [barebox@Calxeda Highbank]:/ # devinfo devices: `---- platform `---- mem0 `---- 0x00000000-0x3fffffff: /dev/ram0 `---- 0x00001000-0x00010fff: /dev/dtb `---- mem1 `---- 0x00000000-0x000051af: /dev/defaultenv `---- mem2 `---- 0x00000000-0xfffffffe: /dev/mem `---- cs1 `---- fff10600.timer `---- fff10620.watchdog `---- fff11000.interrupt-controller `---- l2-cache `---- ffe08000.sata `---- 0x00000000-0x3fffffff: /dev/ata0 `---- 0x00100000-0x014fffff: /dev/ata0.0 `---- 0x01500000-0x3fffffff: /dev/ata0.1 `---- ffe0e000.sdhci `---- fff00000.memory-controller `---- mem3 `---- fff3c000.sregs `---- fff3c200.sregs `---- fff50000.ethernet `---- eth0 `---- fff51000.ethernet `---- eth1 `---- amba `---- sp804 `---- uart-pl011 `---- cs0 `---- fff30000.gpio `---- fff31000.gpio `---- fff32000.gpio `---- fff33000.gpio `---- fff35000.rtc `---- fs `---- ramfs0 `---- devfs0 `---- net `---- global drivers: uart-pl011 sp804 pl061_gpio ramfs devfs tftp hb-xgmac ahci mem [barebox@Calxeda Highbank]:/ # Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-13 10:06:44 +00:00
CONFIG_CMD_OFTREE_PROBE=y
arm: add highbank support currently only tested under qemu qemu-system-arm -M highbank -nographic -m 4089 -kernel build/highbank/arch/arm/pbl/zbarebox -tftp "." -drive id=disk,if=ide,file=disk.img -device ide-drive,drive=disk,bus=ide.0 with: - timer (AMBA SP804) - uart (AMBA PL011) - gpio (AMBA PL061) - ahci - net (XGMAC) Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-13 10:06:42 +00:00
CONFIG_CMD_MTEST=y
CONFIG_CMD_MTEST_ALTERNATIVE=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_UNCOMPRESS=y
CONFIG_CMD_CLK=y
CONFIG_NET=y
commands: NET_DHCP -> CMD_DHCP * this compile option actually turns on a command, so name it accordingly * also move the Kconfig definition into commands/Kconfig, thus placing getopt into the "Network commands" section * while at it, improve Kconfig documention Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2014-05-13 08:28:57 +00:00
CONFIG_CMD_DHCP=y
arm: add highbank support currently only tested under qemu qemu-system-arm -M highbank -nographic -m 4089 -kernel build/highbank/arch/arm/pbl/zbarebox -tftp "." -drive id=disk,if=ide,file=disk.img -device ide-drive,drive=disk,bus=ide.0 with: - timer (AMBA SP804) - uart (AMBA PL011) - gpio (AMBA PL061) - ahci - net (XGMAC) Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-13 10:06:42 +00:00
CONFIG_NET_NFS=y
commands: NET_PING -> CMD_PING * this compile option actually turns on a command, so name it accordingly * also move the Kconfig definition into commands/Kconfig, thus placing getopt into the "Network commands" section * while at it, improve Kconfig documention Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2014-05-13 08:28:56 +00:00
CONFIG_CMD_PING=y
arm: add highbank support currently only tested under qemu qemu-system-arm -M highbank -nographic -m 4089 -kernel build/highbank/arch/arm/pbl/zbarebox -tftp "." -drive id=disk,if=ide,file=disk.img -device ide-drive,drive=disk,bus=ide.0 with: - timer (AMBA SP804) - uart (AMBA PL011) - gpio (AMBA PL061) - ahci - net (XGMAC) Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-13 10:06:42 +00:00
CONFIG_NET_NETCONSOLE=y
CONFIG_NET_RESOLV=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_DRIVER_NET_CALXEDA_XGMAC=y
# CONFIG_SPI is not set
CONFIG_DISK=y
CONFIG_DISK_AHCI=y
CONFIG_GPIO_PL061=y
CONFIG_FS_TFTP=y
CONFIG_SHA1=y
CONFIG_SHA256=y