sysmo-bts
/
barebox
9
0
Fork 0
Code Releases Activity

Merge with /home/wd/git/u-boot/master

This commit is contained in:
Wolfgang Denk 2005-08-13 18:37:31 +02:00
parent 55d150d95d 0e1fb5eebf
commit 46044b4817
4 changed files with 163 additions and 155 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Makefile
View File

@ -1737,7 +1737,7 @@ clean:
rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
rm -f tools/env/fw_printenv tools/env/fw_setenv
rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
rm -f board/trab/trab_fkt
rm -f board/trab/trab_fkt board/voiceblue/eeprom
clobber: clean
find . -type f \( -name .depend \

312
common/miiphybb.c
View File

@ -38,72 +38,79 @@
* Utility to send the preamble, address, and register (common to read
* and write).
*/
static void miiphy_pre(char read,
unsigned char addr,
unsigned char reg)
static void miiphy_pre (char read, unsigned char addr, unsigned char reg)
{
int j; /* counter */
volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, MDIO_PORT);
int j; /* counter */
#ifndef CONFIG_EP8248
volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
#endif
/*
* Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
* The IEEE spec says this is a PHY optional requirement. The AMD
* 79C874 requires one after power up and one after a MII communications
* error. This means that we are doing more preambles than we need,
* but it is safer and will be much more robust.
*/
/*
* Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
* The IEEE spec says this is a PHY optional requirement. The AMD
* 79C874 requires one after power up and one after a MII communications
* error. This means that we are doing more preambles than we need,
* but it is safer and will be much more robust.
*/
MDIO_ACTIVE;
MDIO(1);
for(j = 0; j < 32; j++)
{
MDC(0);
MIIDELAY;
MDC(1);
MIIDELAY;
}
MDIO_ACTIVE;
MDIO (1);
for (j = 0; j < 32; j++) {
MDC (0);
MIIDELAY;
MDC (1);
MIIDELAY;
}
/* send the start bit (01) and the read opcode (10) or write (10) */
MDC(0); MDIO(0); MIIDELAY; MDC(1); MIIDELAY;
MDC(0); MDIO(1); MIIDELAY; MDC(1); MIIDELAY;
MDC(0); MDIO(read); MIIDELAY; MDC(1); MIIDELAY;
MDC(0); MDIO(!read); MIIDELAY; MDC(1); MIIDELAY;
/* send the start bit (01) and the read opcode (10) or write (10) */
MDC (0);
MDIO (0);
MIIDELAY;
MDC (1);
MIIDELAY;
MDC (0);
MDIO (1);
MIIDELAY;
MDC (1);
MIIDELAY;
MDC (0);
MDIO (read);
MIIDELAY;
MDC (1);
MIIDELAY;
MDC (0);
MDIO (!read);
MIIDELAY;
MDC (1);
MIIDELAY;
/* send the PHY address */
for(j = 0; j < 5; j++)
{
MDC(0);
if((addr & 0x10) == 0)
{
MDIO(0);
}
else
{
MDIO(1);
}
MIIDELAY;
MDC(1);
MIIDELAY;
addr <<= 1;
}
/* send the PHY address */
for (j = 0; j < 5; j++) {
MDC (0);
if ((addr & 0x10) == 0) {
MDIO (0);
} else {
MDIO (1);
}
MIIDELAY;
MDC (1);
MIIDELAY;
addr <<= 1;
}
/* send the register address */
for(j = 0; j < 5; j++)
{
MDC(0);
if((reg & 0x10) == 0)
{
MDIO(0);
}
else
{
MDIO(1);
}
MIIDELAY;
MDC(1);
MIIDELAY;
reg <<= 1;
}
/* send the register address */
for (j = 0; j < 5; j++) {
MDC (0);
if ((reg & 0x10) == 0) {
MDIO (0);
} else {
MDIO (1);
}
MIIDELAY;
MDC (1);
MIIDELAY;
reg <<= 1;
}
}
@ -114,66 +121,63 @@ static void miiphy_pre(char read,
* Returns:
* 0 on success
*/
int miiphy_read(unsigned char addr,
unsigned char reg,
unsigned short *value)
int miiphy_read (unsigned char addr, unsigned char reg, unsigned short *value)
{
short rdreg; /* register working value */
int j; /* counter */
volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, MDIO_PORT);
miiphy_pre(1, addr, reg);
/* tri-state our MDIO I/O pin so we can read */
MDC(0);
MDIO_TRISTATE;
MIIDELAY;
MDC(1);
MIIDELAY;
/* check the turnaround bit: the PHY should be driving it to zero */
if(MDIO_READ != 0)
{
/* puts ("PHY didn't drive TA low\n"); */
for(j = 0; j < 32; j++)
{
MDC(0);
MIIDELAY;
MDC(1);
MIIDELAY;
}
return(-1);
}
MDC(0);
MIIDELAY;
/* read 16 bits of register data, MSB first */
rdreg = 0;
for(j = 0; j < 16; j++)
{
MDC(1);
MIIDELAY;
rdreg <<= 1;
rdreg |= MDIO_READ;
MDC(0);
MIIDELAY;
}
MDC(1);
MIIDELAY;
MDC(0);
MIIDELAY;
MDC(1);
MIIDELAY;
*value = rdreg;
#ifdef DEBUG
printf ("miiphy_read(0x%x) @ 0x%x = 0x%04x\n", reg, addr, *value);
short rdreg; /* register working value */
int j; /* counter */
#ifndef CONFIG_EP8248
volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
#endif
return 0;
miiphy_pre (1, addr, reg);
/* tri-state our MDIO I/O pin so we can read */
MDC (0);
MDIO_TRISTATE;
MIIDELAY;
MDC (1);
MIIDELAY;
/* check the turnaround bit: the PHY should be driving it to zero */
if (MDIO_READ != 0) {
/* puts ("PHY didn't drive TA low\n"); */
for (j = 0; j < 32; j++) {
MDC (0);
MIIDELAY;
MDC (1);
MIIDELAY;
}
return (-1);
}
MDC (0);
MIIDELAY;
/* read 16 bits of register data, MSB first */
rdreg = 0;
for (j = 0; j < 16; j++) {
MDC (1);
MIIDELAY;
rdreg <<= 1;
rdreg |= MDIO_READ;
MDC (0);
MIIDELAY;
}
MDC (1);
MIIDELAY;
MDC (0);
MIIDELAY;
MDC (1);
MIIDELAY;
*value = rdreg;
#ifdef DEBUG
printf ("miiphy_read(0x%x) @ 0x%x = 0x%04x\n", reg, addr, *value);
#endif
return 0;
}
@ -184,47 +188,51 @@ int miiphy_read(unsigned char addr,
* Returns:
* 0 on success
*/
int miiphy_write(unsigned char addr,
unsigned char reg,
unsigned short value)
int miiphy_write (unsigned char addr, unsigned char reg, unsigned short value)
{
int j; /* counter */
volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, MDIO_PORT);
int j; /* counter */
#ifndef CONFIG_EP8248
volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
#endif
miiphy_pre(0, addr, reg);
miiphy_pre (0, addr, reg);
/* send the turnaround (10) */
MDC(0); MDIO(1); MIIDELAY; MDC(1); MIIDELAY;
MDC(0); MDIO(0); MIIDELAY; MDC(1); MIIDELAY;
/* send the turnaround (10) */
MDC (0);
MDIO (1);
MIIDELAY;
MDC (1);
MIIDELAY;
MDC (0);
MDIO (0);
MIIDELAY;
MDC (1);
MIIDELAY;
/* write 16 bits of register data, MSB first */
for(j = 0; j < 16; j++)
{
MDC(0);
if((value & 0x00008000) == 0)
{
MDIO(0);
}
else
{
MDIO(1);
}
MIIDELAY;
MDC(1);
MIIDELAY;
value <<= 1;
}
/* write 16 bits of register data, MSB first */
for (j = 0; j < 16; j++) {
MDC (0);
if ((value & 0x00008000) == 0) {
MDIO (0);
} else {
MDIO (1);
}
MIIDELAY;
MDC (1);
MIIDELAY;
value <<= 1;
}
/*
* Tri-state the MDIO line.
*/
MDIO_TRISTATE;
MDC(0);
MIIDELAY;
MDC(1);
MIIDELAY;
/*
* Tri-state the MDIO line.
*/
MDIO_TRISTATE;
MDC (0);
MIIDELAY;
MDC (1);
MIIDELAY;
return 0;
return 0;
}
#endif /* CONFIG_BITBANGMII */

2
include/configs/MIP405.h
View File

@ -128,7 +128,7 @@
#define CONFIG_BAUDRATE 9600 /* STD Baudrate */
#define CONFIG_BOOTDELAY 5
/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
#define CONFIG_BOOT_RETRY_TIME -10 /* feature is avaiable but not enabled */
/* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */
#define CONFIG_BOOTCOMMAND "diskboot 400000 0:1; bootm" /* autoboot command */

2
include/configs/PIP405.h
View File

@ -112,7 +112,7 @@
#define CONFIG_BOOTDELAY 5
/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
#define CONFIG_BOOT_RETRY_TIME -10 /* feature is avaiable but not enabled */
/* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */