tegra: jetson-tk1: enable 1.05V_RUN

Needed for the PCIe PLL amongst other things.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arch/arm/boards/nvidia-jetson-tk1/Makefile

@@ -3,5 +3,5 @@ CFLAGS_pbl-entry.o := \
 	-fno-tree-switch-conversion -fno-jump-tables
 soc := tegra124
 lwl-y += entry.o
-#obj-y += board.o
+obj-y += board.o
 extra-y += jetson-tk1-2gb-emmc.bct

arch/arm/boards/nvidia-jetson-tk1/board.c

@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2014 Lucas Stach <l.stach@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <gpio.h>
+#include <i2c/i2c.h>
+#include <init.h>
+
+#define AS3722_SD_VOLTAGE(n)	(0x00 + (n))
+#define AS3722_GPIO_CONTROL(n)	(0x08 + (n))
+#define  AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDH (1 << 0)
+#define AS3722_GPIO_SIGNAL_OUT	0x20
+#define AS3722_SD_CONTROL	0x4d
+
+static int nvidia_jetson_tk1_devices_init(void)
+{
+	struct i2c_client client;
+	u8 data;
+
+	if (!of_machine_is_compatible("nvidia,jetson-tk1"))
+		return 0;
+
+	client.adapter = i2c_get_adapter(4);
+	client.addr = 0x40;
+
+	/* AS3722: enable SD4 and set voltage to 1.05v */
+	i2c_read_reg(&client, AS3722_SD_CONTROL, &data, 1);
+	data |= 1 << 4;
+	i2c_write_reg(&client, AS3722_SD_CONTROL, &data, 1);
+
+	data = 0x24;
+	i2c_write_reg(&client, AS3722_SD_VOLTAGE(4), &data, 1);
+
+	return 0;
+}
+fs_initcall(nvidia_jetson_tk1_devices_init);

arch/arm/mach-tegra/Kconfig

@@ -70,6 +70,8 @@ config MACH_NVIDIA_BEAVER
 config MACH_NVIDIA_JETSON
 	bool "NVIDIA Jetson TK1"
 	select ARCH_TEGRA_124_SOC
+	select I2C
+	select I2C_TEGRA
 
 endmenu