Documentation: add mips boards files
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit is contained in:
parent
3332609187
commit
baebac06f3
|
@ -0,0 +1,9 @@
|
|||
MIPS
|
||||
====
|
||||
|
||||
.. toctree::
|
||||
:glob:
|
||||
:numbered:
|
||||
:maxdepth: 1
|
||||
|
||||
mips/*
|
|
@ -0,0 +1,44 @@
|
|||
D-Link DIR-320
|
||||
==============
|
||||
|
||||
The D-Link DIR-320 wireless router has
|
||||
|
||||
* BCM5354 SoC;
|
||||
* 32 MiB SDRAM;
|
||||
* 4 MiB NOR type Flash Memory;
|
||||
* RS232 serial interface (LV-TTL levels on board!);
|
||||
* 1xUSB interface;
|
||||
* 4 + 1 ethernet interfaces;
|
||||
* 802.11b/g (WiFi) interface;
|
||||
* JTAG interface;
|
||||
* 5 LEDs;
|
||||
* 2 buttons.
|
||||
|
||||
The router uses CFE as firmware.
|
||||
|
||||
Running barebox
|
||||
---------------
|
||||
|
||||
Barebox can be started from CFE using tftp.
|
||||
You must setup tftp-server on host 192.168.0.1.
|
||||
Put your barebox.bin to tftp-server directory
|
||||
(usual /tftpboot or /srv/tftp).
|
||||
Connect your DIR-320 to your tftp-server network via
|
||||
one of four <LAN> sockets.
|
||||
|
||||
Next, setup network on DIR-320 and run barebox.bin, e.g.::
|
||||
|
||||
CFE> ifconfig eth0 -addr=192.168.0.99
|
||||
CFE> boot -tftp -addr=a0800000 -raw 192.168.0.1:barebox.bin
|
||||
|
||||
|
||||
Links
|
||||
-----
|
||||
|
||||
* http://www.dlink.com.au/products/?pid=768
|
||||
* http://wiki.openwrt.org/toh/d-link/dir-320
|
||||
|
||||
CFE links:
|
||||
|
||||
* http://www.broadcom.com/support/communications_processors/downloads.php#cfe
|
||||
* http://www.linux-mips.org/wiki/CFE
|
|
@ -0,0 +1,56 @@
|
|||
Loongson LS1B
|
||||
=============
|
||||
|
||||
The LS1B is a development board made by Loongson Technology Corp. Ltd.
|
||||
|
||||
The board has
|
||||
|
||||
* Loongson LS1B SoC 250 MHz;
|
||||
* 64 MiB SDRAM;
|
||||
* 512 KiB SPI boot ROM;
|
||||
* 128M x 8 Bit NAND Flash Memory;
|
||||
* 2 x RS232 serial interfaces (DB9 connectors);
|
||||
* 2 x Ethernet interfaces;
|
||||
* 4 x USB interfaces;
|
||||
* microSD card slot;
|
||||
* LCD display (480x272);
|
||||
* audio controller;
|
||||
* beeper;
|
||||
* buttons;
|
||||
* EJTAG 10-pin connector.
|
||||
|
||||
The board uses PMON2000 as bootloader.
|
||||
|
||||
Running barebox
|
||||
---------------
|
||||
|
||||
1. Connect to the boards's UART2 (115200 8N1);
|
||||
|
||||
2. Turn board's power on;
|
||||
|
||||
3. Wait ``Press <Enter> to execute loading image`` prompt and press the space key.
|
||||
|
||||
4. Build barebox and upload ``zbarebox.bin`` via Ymodem to the board:
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
PMON> ymodem base=0xa0200000
|
||||
|
||||
..
|
||||
|
||||
5. Run barebox
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
PMON> g -e 0xa0200000
|
||||
|
||||
..
|
||||
|
||||
Links
|
||||
-----
|
||||
|
||||
* http://en.wikipedia.org/wiki/Loongson
|
||||
* http://www.linux-mips.org/wiki/Loongson
|
||||
* https://github.com/loongson-gz
|
||||
* http://www.linux-mips.org/wiki/PMON_2000
|
||||
* http://www.opsycon.se/PMON2000/Main
|
|
@ -0,0 +1,19 @@
|
|||
QEMU Malta
|
||||
==========
|
||||
|
||||
QEMU run string::
|
||||
|
||||
qemu-system-mips -nodefaults -M malta -m 256 \
|
||||
-nographic -serial stdio -monitor null \
|
||||
-bios barebox-flash-image
|
||||
|
||||
Also you can use GXemul::
|
||||
|
||||
gxemul -Q -x -e maltabe -M 256 0xbfc00000:barebox-flash-image
|
||||
|
||||
Links
|
||||
-----
|
||||
|
||||
* http://www.linux-mips.org/wiki/Mips_Malta
|
||||
* http://www.qemu.org/
|
||||
* http://gxemul.sourceforge.net/
|
|
@ -0,0 +1,62 @@
|
|||
Ritmix RZX-50
|
||||
=============
|
||||
|
||||
Ritmix RZX-50 is a portable game console for the Russian market.
|
||||
|
||||
The portable game console has
|
||||
|
||||
* Ingenic JZ4755 SoC;
|
||||
* 64 MiB SDRAM;
|
||||
* 4 GiB microSDHC card / 4 GiB NAND type Flash Memory (internal boot device);
|
||||
* RS232 serial interface (LV-TTL levels on the board!);
|
||||
* LCD display (480x272);
|
||||
* Video out interface;
|
||||
* 1xUSB interface;
|
||||
* buttons.
|
||||
|
||||
The game console uses U-Boot 1.1.6 as bootloader.
|
||||
|
||||
Running barebox
|
||||
---------------
|
||||
|
||||
1. Connect to the game console's UART
|
||||
(see. http://a320.emulate.su/2012/01/19/uart-na-ritmix-rzx-50/);
|
||||
|
||||
2. Unblock U-Boot console
|
||||
(see. http://a320.emulate.su/2012/01/25/rzx-50-dostup-k-konsoli-u-boot/);
|
||||
Please note that U-Boot's Zmodem support does not work;
|
||||
|
||||
3. Boot Ritmix linux and login;
|
||||
|
||||
4. Build barebox and upload ``barebox.bin`` via Zmodem to the board:
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
# cd /tmp
|
||||
# rz
|
||||
|
||||
..
|
||||
|
||||
5. Write barebox to onboard flash:
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
# dd if=barebox.bin of=/dev/mmcblk0 seek=1048576 bs=1 count=262144
|
||||
|
||||
..
|
||||
|
||||
6. Reboot RZX-50, next in U-Boot console start barebox:
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
CETUS # msc read 0xa0800000 0x100000 0x40000; g a0800000
|
||||
|
||||
..
|
||||
|
||||
|
||||
Links
|
||||
-----
|
||||
|
||||
* http://www.ritmixrussia.ru/products/252/entertainment/game/rzx-50
|
||||
* ftp://ftp.ingenic.cn/2soc/4755/JZ4755_ds.pdf
|
||||
* ftp://ftp.ingenic.cn/3sw/01linux/01loader/u-boot/u-boot-1.1.6-jz-20110719-r1728-add-jz4770.patch.bz2
|
|
@ -0,0 +1,67 @@
|
|||
TP-LINK MR3020
|
||||
==============
|
||||
|
||||
The TP-LINK MR3020 wireless router has
|
||||
|
||||
* Atheros ar9331 SoC;
|
||||
* 32 MiB SDRAM;
|
||||
* 4 MiB NOR type SPI Flash Memory;
|
||||
* RS232 serial interface (LV-TTL levels on board!);
|
||||
* 1 USB interface;
|
||||
* 1 Ethernet interfaces;
|
||||
* 802.11b/g/n (WiFi) interface;
|
||||
* LEDs & buttons.
|
||||
|
||||
The router uses U-Boot 1.1.4 as firmware.
|
||||
|
||||
Running barebox
|
||||
---------------
|
||||
|
||||
Barebox can be started from U-Boot using tftp.
|
||||
But you have to encode barebox image in a very special way.
|
||||
|
||||
First obtain ``lzma`` and ``mktplinkfw`` utilities.
|
||||
|
||||
The ``lzma`` utility can be obtained in Debian/Ubuntu
|
||||
distro by installing lzma package.
|
||||
|
||||
The ``mktplinkfw`` utility can be obtained from openwrt, e.g.::
|
||||
|
||||
$ OWRTPREF=https://raw.githubusercontent.com/mirrors/openwrt/master
|
||||
$ curl -OL $OWRTPREF/tools/firmware-utils/src/mktplinkfw.c \
|
||||
-OL $OWRTPREF/tools/firmware-utils/src/md5.c \
|
||||
-OL $OWRTPREF/tools/firmware-utils/src/md5.h
|
||||
$ cc -o mktplinkfw mktplinkfw.c md5.c
|
||||
|
||||
To convert your barebox.bin to U-Boot-loadable image (``6F01A8C0.img``)
|
||||
use this command sequence::
|
||||
|
||||
$ lzma -c -k barebox.bin > barebox.lzma
|
||||
$ ./FW/mktplinkfw -c -H 0x07200103 -W 1 -N TL-WR720N-v3 \
|
||||
-s -F 4Mlzma -k barebox.lzma -o 6F01A8C0.img
|
||||
|
||||
You must setup tftp-server on host 192.168.0.1.
|
||||
Put your ``6F01A8C0.img`` to tftp-server directory
|
||||
(usual ``/tftpboot`` or ``/srv/tftp``).
|
||||
|
||||
Connect your board to your tftp-server network via Ethernet.
|
||||
|
||||
Next, setup network on MR3020 and run ``6F01A8C0.img``, e.g.::
|
||||
|
||||
hornet> set ipaddr 192.168.0.2
|
||||
hornet> set serverip 192.168.0.1
|
||||
hornet> tftpboot 0x81000000 6F01A8C0.img
|
||||
hornet> bootm 0x81000000
|
||||
|
||||
|
||||
Links
|
||||
-----
|
||||
|
||||
* http://www.tp-link.com/en/products/details/?model=TL-MR3020
|
||||
* http://wiki.openwrt.org/toh/tp-link/tl-mr3020
|
||||
* https://wikidevi.com/wiki/TP-LINK_TL-MR3020
|
||||
|
||||
See also
|
||||
|
||||
* http://www.eeboard.com/wp-content/uploads/downloads/2013/08/AR9331.pdf
|
||||
* http://squonk42.github.io/TL-WR703N/
|
Loading…
Reference in New Issue