Move int_sqrt() out of drivers/video/edid.c so that it is availible to
other parts of Barebox.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is required by UBIFS update.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The only user of libmtd was ubiformat which now uses the mtd-peb API,
so remove the now unused libmtd.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for Reliable Asynchronous Transfer Protocol (RATP)
as described in RFC916.
Communication over RS232 is often unreliable as characters are lost or
misinterpreted. This protocol allows for a reliable packet based communication
over serial lines.
The implementation simply follows the state machine described in the RFC
text with one exception. RFC916 uses a plain checksum for the
transferred data. We decided to use CRC16 for greater robustness. Since
this is the only RFC916 implementation we currently know of interoperability
with other implementations should not matter.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
reed solomon code is used by RAMOOPS to check and fix data stored in
volatile memory.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the new barebox logo to the tree. This is added as svg
image which is converted to different png images during build time. The logo
can be found under /logo/barebox-logo-<width>.png in the running barebox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Taken from the Kernel, put into the same place as in the kernel,
although the hexdump.c does not actually contain hexdum functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds simple console support to the PBL which makes it
possible to print more complex messages in the PBL than just
strings or hex numbers. For now puts_ll is used to print the
messages, so it depends on CONFIG_DEBUG_LL which makes it
more a debugging option. However, this could be extended later
to get regular output from the PBL if desired.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds xz decompression support from the kernel. Both compressing
the barebox binary with xz and decompressing xz files on the commandline
is supported.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have our file helper functions in several places. Move them
all to lib/libfile.c.
With this we no longer have file helpers in fs/fs.c which contains
the core fs functions and no functions in lib/libbb.c which are
not from busybox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
EFI uses 16 bit character strings. Add beginning support for this.
Since barebox uses 8 bit strings internally we need conversion functions
to convert between 16 bit and 8 bit strings.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MXS specific devices have some common infrastructure in the kernel
known as STMP devices. We have the same in barebox, but with a
mxs_ prefix instead of a stmp_ prefix. As some STMP devices are
also found on i.MX6 move the common infrastructure out of MXS
specific files and use the stmp_ prefix.
This is done in preparation for i.MX6 NAND support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for extracting LZ4-compressed kernel images,
as well as LZ4-compressed ramdisk images in the kernel boot process.
This depends on the patch below
decompressor: Add LZ4 decompressor module
Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to have a generic code to create different bootstrap
As example
Barebox as TI Xloader
Barebox as AT91 Bootstrap
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This command works like the corresponding Unix shell command and
is used for adding, multiplying and much more.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Based on mtd-utils and stripped down to needed functionality and
reworked to barebox interfaces.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Imported from mtd-utils and stripped down to needed functionality.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Imported from mtd-utils and stripped down to needed functionality.
Add prefix to functions so we have a clean namespace.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current Y-Modem implementation has some limitations:
- Y-Modem/G protocol is not supported
- Multiple files (aka. batch) transfers are not supported
- Transfer speed over fast lines (USB console) is slow
- Code is not trivial to maintain (personnal opinion)
This implementation tries to address all these points by
introducing loady2 command.
The effects are :
- transfer speed for Y-Modem over USB jumps from 2kBytes/s
to 180kBytes/s
- transfer speed for Y-Modem/G jumps to 200kBytes/s
- multiple file transfers are possible
This command was tested on a USB console and UART 9600bps
serial line :
- NAKs (and retransmissions) were tested for faulty
serial lines
- multiple file transfers were tested
- Y-Modem, Y-Modem/G and X-Modem transfers were tested
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is an alternative to LodePNG take from http://forge.voodooprojects.org/
which is base on picoPNG C++ wrote by Lode Vandevenne. The same author as
LodePNG.
PicoPNG only support RGBA PNG8
The source code of picopng.c was just adapted to be compliant with C89 and drop
the internal ZLIB support. Coding style untouched.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
use LodePNG version 20120729 from http://lodev.org/lodepng/
The original coding style is keeped to simplify update.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to support bmp and png
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So we can add other format support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add bit reversing utility, taken from the linux kernel.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As flash memories need BCH correcting codes, add the BCH
library, taken from the linux kernel.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Andrey Smirnov
Alexander Stein
Markus Pargmann
Antony Pavlov
Andrey Panov
Kyungsik Lee
Jean-Christophe PLAGNIOL-VILLARD
Jan Luebbe
Wolfram Sang
Robert Jarzmik