9
0
Fork 0

Commit Graph

  • a07b1b7503 login: Follow timeout guidelines when password returns in time v2015.05-sysmobts-separate-rescue Pau Espin 2018-02-15 17:23:50 +0100
  • d87c27d7ab build: update compiler*.h to newest versions v2015.06 Alexey Galakhov 2015-07-06 09:32:45 +0200
  • 79f12bc8b4 Revert "misc: Include compiler-gcc5.h from u-boot/linux" Holger Hans Peter Freyther 2017-08-08 14:39:32 +0800
  • 1d8bdd6f22 Fix linking with new ld, based on u-boot Andrey Panov 2017-04-19 22:25:17 +0300
  • 03c48b742d sysmobts: Add support for revg and later versions hfreyther/v2017.03-rebase Holger Hans Peter Freyther 2016-06-06 14:33:50 +0200
  • 6c5793a62d OWHW: Reset the switch only at power-up Harald Welte 2016-04-10 12:49:04 +0200
  • ad57125cc8 OWHW: Issue SWITCH_RESET during boot Harald Welte 2016-04-10 12:39:40 +0200
  • 5c237290e9 OWHW: move boot state to beginning of partition Harald Welte 2016-02-23 00:33:04 +0100
  • 452b7dd48f OWHW: Add device tree for hardware v2 Harald Welte 2016-02-17 20:03:27 +0100
  • 929332da16 sysmobts: enable DSP clock Jan Luebbe 2015-11-22 15:47:20 +0100
  • d85cee4420 sysmobts: configure AEMIF CS3 for the FPGA Jan Luebbe 2015-11-22 14:41:51 +0100
  • cf239b47f8 OWHW: only set global.initrd if the system0/1 partition contains one Harald Welte 2015-11-07 17:22:01 +0100
  • 53a92664d2 OWHW: Fix GPIO assignment for GPIO button (1_25 instead of 1_22) Harald Welte 2015-11-05 16:15:15 +0100
  • 66c14d49d1 OWHW: Support AT24CM02 EEPROM Harald Welte 2015-11-01 23:19:08 +0100
  • b666be6998 OWHW: Fix pinmux for I2C bus 1 (I2C_EXT) Harald Welte 2015-10-31 18:20:51 +0100
  • 84688931cf Initial GSMK OWHW v1 board support Harald Welte 2015-10-31 10:13:25 +0100
  • f97a686728 sysmobts: use slot layout for the rescue volume Jan Luebbe 2015-08-06 14:26:36 +0200
  • 28484c4c06 sysmocom-odu: use slot layout for the rescue volume Jan Luebbe 2015-08-06 14:26:10 +0200
  • 208d53ef9e sysmocom-odu: read mac addresses from EEPROM Jan Luebbe 2015-08-06 12:31:33 +0200
  • 1f07bf18ed sysmocom-odu: configure eeprom write-protect GPIO Jan Luebbe 2015-07-02 17:00:40 +0200
  • 7a93eadb10 sysmocom-odu: remove password configuration Jan Luebbe 2015-06-30 18:25:01 +0200
  • 86b097442e sysmocom: set the default load address to 0x81000000 Jan Luebbe 2015-06-15 14:13:33 +0200
  • 7fd1e0f4dc sysmocom: configure the watchdog for 60 seconds Jan Luebbe 2015-06-15 14:13:00 +0200
  • b6dbcd408a sysmobts: run lindent Jan Luebbe 2015-06-14 12:13:30 +0200
  • c5cd569198 sysmobts: disable NAND write protect where needed Jan Luebbe 2015-06-14 12:08:31 +0200
  • 8b61a7b135 sysmobts: detect the eeprom variant at runtime Jan Luebbe 2015-06-14 12:08:16 +0200
  • be17e14d38 sysmobts: fix board versio detection Jan Luebbe 2015-06-14 12:07:28 +0200
  • 121f852722 sysmobts: use uImages for now Jan Luebbe 2015-06-13 17:36:16 +0200
  • ff108b61cd sysmocom-odu: use uImages for now Jan Luebbe 2015-06-13 17:35:35 +0200
  • dc9a8b144c sysmobts: check for an oftree in the rescue image Jan Luebbe 2015-06-11 18:23:26 +0200
  • 5192ad9c61 sysmocom odu: add support Jan Luebbe 2015-06-11 18:22:26 +0200
  • 3eb17085c2 misc: Save it as defconfig and enable the "login"/"passwd" command Holger Hans Peter Freyther 2014-11-20 19:42:19 +0100
  • 7e5be886c8 misc: Rename config to show up during make help Holger Hans Peter Freyther 2014-11-20 19:39:17 +0100
  • c1ad249d19 pcm051: Add config files as used by the ODU device Holger Hans Peter Freyther 2014-07-11 17:55:55 +0200
  • de52393ab7 odu: Enable a login timeout and set a password Holger Hans Peter Freyther 2014-11-20 19:58:22 +0100
  • 1fce712aa7 phytec-phycore: partially move partition setup from dtsi to dts Jan Luebbe 2015-06-11 16:04:53 +0200
  • 5b7fa7b059 odu: Send a LLDP frame on boot Holger Hans Peter Freyther 2014-11-20 21:31:22 +0100
  • 1c738631f2 net: Initial frame to be able to send LLDP frames from barebox Holger Hans Peter Freyther 2014-11-20 20:39:17 +0100
  • d56b407d86 sysmobts: add support for the sysmobts v2 Jan Luebbe 2015-04-14 18:43:05 +0200
  • f437135e64 fixup! davinci_nand: add support for the NAND controller Jan Luebbe 2015-07-30 17:12:23 +0200
  • 05ae0684e0 arm: davinci: add dm644x clock and PSC support Jan Luebbe 2015-04-21 11:17:25 +0200
  • e8cc0cd34d davinci_emac: add support for version 1 Holger Hans Peter Freyther 2017-03-30 16:57:51 +0200
  • 24117c8891 davinci_nand: add support for the NAND controller Holger Hans Peter Freyther 2017-03-30 16:54:43 +0200
  • 4c3b7f285a partition: do not overwrite an existing DT node pointer Holger Hans Peter Freyther 2017-03-30 16:53:25 +0200
  • e918d9035f compiler: Make ubi/ubifs compile with its unused variables Holger Hans Peter Freyther 2017-03-30 00:00:35 +0200
  • 3104fae244 ubiformat: fix the subpage size hint on the error path Sascha Hauer 2015-12-09 08:35:45 +0100
  • 7b46b5e850 ARM: Omap3: Remove useless inline Sascha Hauer 2015-12-10 09:18:42 +0100
  • fbc48ec855 Copy and paste header for gcc6 as well.. Holger Hans Peter Freyther 2017-03-29 23:45:24 +0200
  • ca1b8e0ef2 Copy and paste header for gcc6 as well.. Holger Hans Peter Freyther 2017-03-29 23:45:24 +0200
  • 444ee36545 state: backend circular: Fix wrong comment Sascha Hauer 2017-03-27 11:47:29 +0200
  • f4ea4a134b usb_kbd: release all keys on error / disconnect Peter Mamonov 2017-03-23 00:38:03 +0300
  • 9df009de99 state: bucket_circular: -EUCLEAN means data could be read Sascha Hauer 2017-03-20 13:33:47 +0100
  • 1fde9ef265 state: bucket_cached: Fix reading pages which need cleanup Sascha Hauer 2017-03-20 13:30:33 +0100
  • 66d7674f8b mtd: fix reading data from page that needs cleanup Sascha Hauer 2017-03-20 13:26:09 +0100
  • 26a1aedb1b ARM: mvebu: only build kwbootimage support if BOOTM is enabled Lucas Stach 2017-03-20 14:07:08 +0100
  • f604cc62be ATA: mvebu: select DISK_ATA Lucas Stach 2017-03-20 14:07:07 +0100
  • ac0c067f2b ARM: add AFLAGS for secure monitor files Lucas Stach 2017-03-20 14:07:06 +0100
  • 82c065d276 ARM: dts: i.MX7 WaRP7: remove wdog1 pinctrl workaround Alexander Kurz 2017-03-19 18:02:10 +0100
  • d711adeec8 ARM: i.MX7: Kconfig: ARCH_IMX7 selects PINCTRL_IMX_IOMUX_V3 Alexander Kurz 2017-03-19 18:01:57 +0100
  • 249b40be7e efi: clocksoure: make sure the meassured frequency is valid Michael Olbrich 2017-03-14 10:37:29 +0100
  • 2846e53d2d arm: baltos: define baltos_sram_init() return type as void Yegor Yefremov 2017-03-10 10:15:25 +0100
  • 27f3f993b8 fix: console: expose consoles in devfs Jean-Christophe PLAGNIOL-VILLARD 2017-03-10 15:41:16 +0100
  • 97d2da3d98 Merge branch 'for-next/video' Sascha Hauer 2017-03-13 08:16:53 +0100
  • 6b926567c0 Merge branch 'for-next/usb' Sascha Hauer 2017-03-13 08:16:44 +0100
  • a2e3bad25f Merge branch 'for-next/rpi' Sascha Hauer 2017-03-13 08:16:44 +0100
  • 6134116686 Merge branch 'for-next/mvebu' Sascha Hauer 2017-03-13 08:16:44 +0100
  • e0093dcf23 Merge branch 'for-next/misc' Sascha Hauer 2017-03-13 08:16:44 +0100
  • 4e11672653 Merge branch 'for-next/imx' Sascha Hauer 2017-03-13 08:16:44 +0100
  • 93c55ce098 Merge branch 'for-next/efi' Sascha Hauer 2017-03-13 08:16:43 +0100
  • 12b6a916d6 Merge branch 'for-next/dts' Sascha Hauer 2017-03-13 08:16:39 +0100
  • 56d9a9815a Merge branch 'for-next/at91' Sascha Hauer 2017-03-13 08:16:38 +0100
  • 957bb6b6bc dts: update to v4.11-rc1 Sascha Hauer 2017-03-10 08:56:15 +0100
  • cc2392cf4f dts: update to v4.10-rc8 Sascha Hauer 2017-03-10 08:56:02 +0100
  • a614f64d72 Release v2017.03.0 Sascha Hauer 2017-03-10 08:50:24 +0100
  • 939d3a7684 fastboot: abort autoboot timeout when fastboot gadget is activated Marc Kleine-Budde 2017-03-10 07:05:23 +0100
  • e3dda8553e console_countdown: add possibility to abort countdown by external commands Marc Kleine-Budde 2017-03-10 07:05:22 +0100
  • 3d92ea4738 console_countdown: width to of countdown to 4 digits Marc Kleine-Budde 2017-03-10 07:05:21 +0100
  • dfcfb5b831 bbu: Search for cdev names aswell Sascha Hauer 2017-03-08 10:24:01 +0100
  • be0c9a3fad parameter: fix read only int support Jean-Christophe PLAGNIOL-VILLARD 2017-03-09 10:57:20 +0100
  • f210382b3f video: make enable/disable ops optional Jean-Christophe PLAGNIOL-VILLARD 2017-03-09 10:57:21 +0100
  • f8f3f26f8b video: call fb_[en|dis]able instead of fops directly Sascha Hauer 2017-03-10 08:07:23 +0100
  • a76714f7f9 clocksource: at91: Move to 'drivers/clocksource' Andrey Smirnov 2017-03-08 14:09:09 -0800
  • d6200fe415 spi: atmel_spi: Use VERSION register instead of CPU type Andrey Smirnov 2017-03-08 14:09:08 -0800
  • dd0f42879b spi: atmel_spi: Configure CS GPIO as output Andrey Smirnov 2017-03-08 14:09:07 -0800
  • d5f52220e6 usb: echi-atmel: Check result of ehci_register() Andrey Smirnov 2017-03-08 14:09:06 -0800
  • 05c34d220c usb: ehci-atmel: Zero ehci_data before using it Andrey Smirnov 2017-03-08 14:09:05 -0800
  • ef54fb4b1f usb: echi-atmel: Convert global variables to private data Andrey Smirnov 2017-03-08 14:09:04 -0800
  • b52eb5a9a2 usb: ehci-atmel: Check result of clk_enable() Andrey Smirnov 2017-03-08 14:09:03 -0800
  • bf09557360 usb: ohci-at91: Check result of clk_enable() Andrey Smirnov 2017-03-08 14:09:02 -0800
  • fb1ff1794a usb: ohci-at91: Convert global variables to private data Andrey Smirnov 2017-03-08 14:09:01 -0800
  • 56f3bd1cd3 usb: ohci-at91: Check result of clk_get() Andrey Smirnov 2017-03-08 14:09:00 -0800
  • 6dc7545135 serial: atmel: Check result of clk_get() Andrey Smirnov 2017-03-08 14:08:59 -0800
  • 3494084017 of: base: Use scoring in DT device matching Andrey Smirnov 2017-03-08 14:08:58 -0800
  • 2b9bcff79a usb: gadget: properly release f_multi_opts Sascha Hauer 2017-01-20 10:03:45 +0100
  • 25fd64ed22 usb: gadget: print a meaningful error message Sascha Hauer 2017-01-20 09:36:44 +0100
  • 400988a831 usb: imx: Fix setting of dev->priv Sascha Hauer 2017-03-09 09:30:46 +0100
  • d6ef702f4f usb: imx: role_registered contains role Sascha Hauer 2017-03-09 09:29:54 +0100
  • 0482159e9a drivers: clk: clk-imx6.c: Don't gate LDB and IPUs David Jander 2017-03-03 08:33:53 +0100
  • a8b41f2c72 clk: Make COMMON_CLK_OF_PROVIDER depend on OFTREE Andrey Smirnov 2017-03-08 14:08:56 -0800
  • b5ea2c6acc clk: Port two helper functions from Linux Andrey Smirnov 2017-03-08 14:08:55 -0800