This fixes a compile error introduced with:
| commit 37f47a2a8c
| Author: Robert P. J. Day <rpjday@crashcourse.ca>
| Date: Mon Jul 7 05:36:33 2014 -0400
|
| crc32: Proper name of command is "crc32".
|
| Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The help texts are parsed by sphinx which cannot handle macros, so
replace them with their values.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Correct options listings for a couple device tree-related commands.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix option explanation, and a couple grammar fixes.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Always collect directory entries in a string_list and evaluate it
later. This makes sure that the files are printed alphabetically
even when -l is given.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Suppose you have two network controllers.
The first one is ENC28J60 (it is in low power mode
after start) the second one is always-enabled eth1.
As ENC28J60 is in low power mode before enc28j60_eth_open()
is called. ENC28J60's mii traceiver is in low power mode too
so the mii traceiver's register are inaccessable.
Here is a sample log just after barebox start:
barebox:/ miitool
miibus0: registered phy as /dev/phy0
No MII transceiver present!.
miibus1: registered phy as /dev/phy1
phy1: eth1: negotiated 100baseTx-FD, link ok
barebox:/ miitool
No MII transceiver present!.
phy1: eth1: negotiated 100baseTx-FD, link ok
The 'No MII transceiver present!.' message is confusing here.
This patch fixes the problem so the miitool output
looks like this:
barebox:/ miitool
phy0: spieth0: No MII transceiver present!.
phy1: eth1: negotiated 100baseTx-FD, link ok
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When compiled for ARCH=sandbox, we get a compiler warning
if we don't include the needed header file as well.
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This saves one second of user time on every interactive boot.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
bmcr2 contains the gigabit advertise bits and lpa2 contains the gigabit
link partner ability bits, not the other way round.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
media_list tests for gigabit phys like this:
if (mask & BMCR_SPEED1000)
mask does not contain the value of the BMCR register though, so the
test is completely bogus. Test for mask2 instead which is only
nonzero when the phy has gigabit capabilities.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
media_list writes into a static string. Worst case length of this string
is 125 bytes, but the function only allocates 100 bytes. Use 256 bytes which
is long enough for some extensions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed; The FSF site says that
address is
Free Software Foundation
51 Franklin Street, Fifth Floor
Boston, MA 02110-1301
USA
(see http://www.fsf.org/about/contact/)
Instead of updating it each time the address changes,
just drop it completely treewide.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch reduces the indentation of "devinfo", to reduce the amount of
overly long lines.
And while we're at it, also remove the fixed-size of the human-readable
area. As entries didn't align anyway (because of indentation), this was
just eating more space without giving much more readability.
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* fix indentation of options in 'help bootm'
* add missing help for -m
* put some output into debug/verbose mode
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* some output sections started with "foo: bar", some with "foo = bar". Unify this.
* there was a fixed size to the "foo =" parameters, which wasn't fitting, this
was especially visible at "devinfo global"
* don't output "resources:", "driver:" and "bus:" lines if there are none
resources, drivers or busses involved.
* remove some empty lines
* harmonize differentiation between headlines (e.g. "resources:") and values
by indenting values slightly
* uppercase some texts
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The command 'devinfo' was first spitting out all devices, and then
also all drivers. This patch separates them into two commands,
'devinfo' as before, and also the new command 'drvinfo'
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When loading or saving a devicetree it seems logical to add the
filename to the option specifying the command. This is also slightly
easier to parse.
While at it add missing documentation for the -s option.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
I assume I am the only person knowing that barebox is able to
merge devicetrees. This feature seems broken for a while now since
trying to merge devicetress results in:
unflatten: too many end nodes
Remove this feature to save the complexity.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The oftree command is overloaded. This adds a dedicated command
which only dumps devicetrees to the console so that the corresponding
functionality in the oftree command can be removed in the next step.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It's not always easy to know what is the size of a parition.
This patch adds the size of a memory range in human readable
format. We now have for example:
`---- cfi_flash0
`---- nor0
`---- 0x00000000-0x00ffffff ( 16 MiB): /dev/nor0
`---- 0x00000000-0x0001ffff ( 128 KiB): /dev/env0
`---- 0x00020000-0x0011ffff ( 1 MiB): /dev/fpga0
`---- 0x00120000-0x0019ffff ( 512 KiB): /dev/self0
`---- 0x001a0000-0x00d9ffff ( 12 MiB): /dev/linux
`---- 0x00da0000-0x00ffffff ( 2.4 MiB): /dev/elf
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The of_* commands take devicetree nodes as parameters. Add a
devicetree completion function to ease passing nodes to these
commands.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also uppercased the abbreviation GPIO in printf.
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this places the command into the "Network commands"
section of Kconfig
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this compile option actually turns on a command, so name it
accordingly
* also move the Kconfig definition into commands/Kconfig, thus
placing getopt into the "Network commands" section
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this compile option actually turns on a command, so name it
accordingly
* also move the Kconfig definition into commands/Kconfig, thus
placing getopt into the "Network commands" section
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
... because NET_RESOLV can be used alone to turn on the functionality
of resolv().
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this compile option actually turns on a command, so name it
accordingly
* also move the Kconfig definition into commands/Kconfig, thus
placing getopt into the "Shell scripting commands" section
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this places the command into the "Information commands"
section of Kconfig
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Robert P. J. Day
Antony Pavlov
Rolf Evers-Fischer
Holger Schurig
Jan Luebbe
Alexander Shiyan
Franck Jullien