Currently all devices have an id meaning that all devicenames
end with a number. This patch adds a DEVICE_ID_SINGLE to make
it ppossible to register a device without an id assigned to
it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for KS8851 16bit MLL chip from Micrel Inc.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Support for the old DM9000E device is now part of the new dm9k.c driver. So,
remove the old driver source and switch all users to the new driver.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For disk like devices attached to MCI, ATA or USB it depends on the order they
will be recognized. So an unique number for all disk like devices is required.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as now all the drivers and board have been switch to resource whe can drop
map_base and size from device_d
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
use generic read/write depending on the memory size
if no reg_read/write defined
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
pass the hccr and hcor register base via resource
instroduce add_generic_usb_echi_device with hccr = base + 0x100 and
hcor = base + 0x140
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Add a helper function for boards to register their memory
devices. This makes the board code smaller and also helps
getting rid of map_base and struct memory_platform_data.
And switch all of the memory to it
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
we keep struct memory_platform_data for now on we will switch off the memories
resources to struct resource
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
We might want to add real resource tracking later. Also
The first resource may not be a IORESOURCE_MEM at all.
For these reasons introduce a wrapper function for
driver so that they do not have to fiddle with resources
directly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
and add multi resource per device support
for now we keep the old map_base and size temporary but will switch all of
the used step by step to them resource way
and mirror the first resource to the map_base and size if available
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This makes it possible to compile without devfs. devfs_create/devfs_remove
is used by drivers and thus must still be present even without devfs support.
Also, this patch adds cdev_open/cdev_close/cdev_flush/cdev_ioctl calls to
work with devices without using the file api.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dev_name is supposed to return the name of the device plus the id
currently we use %s%d format where in the kernel the use %s.%d
we may think to switch to this format for the device name and keeping the %s%d
for the devfs
this will be usefull to not modify the clock device name as example
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Change device parameters so that the memory management is in generic
code. This also removes the need of storing statically initialized
parameters as they are stored in a struct list_head for each device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We accidently have two list implementations in the tree:
include/list.h and include/linux/list.h. This patch moves
the latter (newer one) to include/linux/list.h.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add an open counter for device files so that we cannot accidently
remove an opened device. This happened with bb devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some devices, especially the ones doing DMA should be disabled before
giving control to an OS. We take the simple approach here: Just shutdown
the devices in the reverse order they were activated.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Proven to be useful in linux kernel, U-Boot should have such a thing
aswell. We do not distinguish between the various print levels others
than debug and not debug.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add an own device id for partitions. This is necessary to allow
the partition layer to check if the given device is really a partition.
Also, check for readonly flag in erase.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Use device tree structure to implement partitions
- Let devinfo print a nice tree
- Introduce 'fixed' partitions which are not removable
- Fix mount: It was not possible to mount on a relative path.
With this function we can get a pointer to directly memory mapped
devices like nor flash or RAM. Useful for bootm where we save one
memcopy when the image is mappable