Disable the watchdog powerdown counter at start. Otherwise this may
trigger a reset or poweroff over the WDOG_B line to a PMIC. This counter
is set to 16 seconds after poweron.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Replace the set_timeout function in the device platform data by an ops
struct which stores a set_timeout and init function.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a watchdog timeout is set in the linux kernel, the FORCE_UPDATE bit is set.
Use this to recognize a system reset that was triggered by the watchdog.
Since only the wdt part of the kernel driver sets this bit, this is a safe
distinguishing feature.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also move reset_cpu() for jz4755 SoC from platform code
into the new driver code.
At the moment mach-xburst lacks clk support so jz4740 watchdog
driver looks like a template. We can improve jz4740 watchdog
driver later after adding clk support.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit 17176c2e2b adds a test of a new RTC
register flag to distinguish a system reset and a wake up event. Shame on me,
I have forgotten to define the newly used flag yet.
While already here, I also try to document the other flags the RTC provides.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When the built-in RTC in the i.MX28 is programmed to wake-up the SoC, the RTC
reports two events: RST and WAKE. RST is okay in this case, because the PMIC
was really powered down. But the real event is the WAKE from the RTC and
should have precedence over the RST event. So, report the WAKE event for this
special case.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- for i.MX1 the register is in the System Control unit, so move
the code to arch/arm/mach-imx/imx1.c
- for the other i.MX the register is in the watchdog unit, so move
the code to drivers/watchdog/imxwd.c
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a simple wd command which can setup, trigger and stop a watchdog
on the platform.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Jan Luebbe
Markus Pargmann
Steffen Trumtrar
Sascha Hauer
Antony Pavlov
Juergen Beisert
Alexander Shiyan
Jean-Christophe PLAGNIOL-VILLARD