This is not yet a regulator driver, only the register map is
exported as /dev/pfuze* so the registers can be accessed for
debugging purposes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Our asprintf and vasprintf have different prototypes than the glibc
functions. This causes trouble when we want to share barebox code
with userspace code. Change the prototypes for (v)asprintf to match
the glibc prototypes. Since the current (v)asprintf are convenient
to use change the existing functions to b(v)asprintf.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
gpio has to be initialized with an invalid gpio number. 0 is a valid
number and it will be requested and used by the driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch changes the most part of mach-bcm2835 to mach-bcm283x. This
prepares to add RPi2 support which is a bcm2836. This patch changes the
Kconfig entry namens to BCM283X for drivers only. These drivers should
working the same in bcm2836.
While updating defconfig I added LED support/trigger option.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Internally we only have a struct regulator_internal, so factor
out regulator_enable_internal and regulator_disable_internal
functions which can be called from regulator internal code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to handle IP power automatically and not at board level
Mainline kernel need this as they do not have the regulator driver support
as some IP such as USB are not power on at boot
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will use the device name as regulator name
with the same Algo as clkdev for lookup
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Compiling the tree with allyesconfig is helpful because different
compilers (gcc, clang) or static checkers (e.g. clang's scan-build)
can then process and check more code.
This patch introduces two new configuration symbols that Kconfig files
can depend on. That way, code that is only working where a cache or DMA
implementation exists can be opted out.
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Support the "regulator-always-on" property for fixed regulators.
The regulator gets enabled on probe and subsequent disable calls are
ignored.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Provide minimal regulator support. Only supported operations are enabling
and disabling regulators. Association of devices with their regulators is
limited to devicetree only. If regulator support is disabled the API expands
to static inline stubs so consumers can still use the API.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Alexander Aring
Jean-Christophe PLAGNIOL-VILLARD
Holger Schurig
Steffen Trumtrar