this will allow to execute a program of the host from barebox
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have to check which sd card slot we use. The registered mmc_id is the
the correct parameter for this.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is needed for the ohci-at91 to work.
In u-boot this function was transmitting a cmdlen of 12, by the initial
commit. There are similar functions like usb_request_sense,
usb_read_capacity nearby which also transmit 12 byte per default on
u-boot, which probably also need a fix.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as example today if the timeout happened we can not probe the SD card again
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As USB can have its cable plugged out anytime, make the
serial gadget reliable in case of unplugging :
- unregister the gadget_serial provided console
- don't stay forever in the read loop if connection was cut
This behaviour relies on correct implementation of
usb_gadget_poll(), which should return an error if the USB
cable was removed.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The serial gadget can only work if the serial function is
properly connected on USB trigger (ie. on SET_CONFIGURATION
or SET_INTERFACE USB message triggering set_alt() in
composite.c).
Make this connection and handle also the disconnection in
f_serial.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use the generic gadget polling function instead of the
specific fsl function. This is a fix from a leftover in
gadget development.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adapt mainline kernel pxa27x_udc driver to barebox :
- remove function header comments as they are in mainline
- test it with serial gadget
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some console are transient, like the USB connected serial
console which should be removed when the USB connection is
severed.
Enable console removal for such devices.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dlmalloc seems to work more efficient with this chunk size.
Copying a bigger file (3MB) takes 271ms vs. 125ms on a i.MX27
board. Even bigger chunk sizes do not further improve performance.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If parameter -v without a crc is used, you got a notice but the crc is
calculated and exit status is 0.
With wrong parameters we should quite with COMMAND_ERROR_USAGE.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
cramfs does not compile since we updated zlib to the kernel
version. Fix this by using the kernel version of uncompress.c
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The core support was brought by Marc and Sascha.
The cache choice was fixed by Luotao Fu.
Some gpio and devices addons were provided by Robert.
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Barebox cannot boot the recent mainline Linux kernels for the
i.MX21ADS board anymore when using TFTP, because the heap is too
small.
This is solved by increasing the heapsize to 5Mbyte.
Signed-off-by: Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- use KERN_ERR for messages when NAND-ID detection fails
- report the IDs also if not found
- print the errno if nand_scan failed
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This simplifies the code somewhat. The user visible change here is
that we now ignore the compression specified in the uImage. Instead
we detect the compression type from the data which also means that
we now support lzo compressed uImages.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Using the new uncompress function we can now implement a command which
can uncompress all known compression types. This supplements the unlzo
command.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
uncompress() has the same prototype as the various kernel decompress
functions. It automatically detects the compression type and selects
the correct uncompress function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Several filetypes can be autodetected. Barebox could make use
of this in several ways:
- Add a command to detect filetypes
- detect arm zImages and uImages to unify the different boot commands
- maybe detect UBI or JFFS2 images to construct parts of the kernel
command line
- select correct uncompression function based on filetype
This patch adds basic support to detect filetypes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead, let the user select them manually so that bootm supports
all compression types compiled in.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Allow the user to manually select the uncompression support
he wants to have so that we have a single point where a user
can see which uncompression support will be compiled in.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>