warning: the ohci work only without MMU
enable:
- ehci
- usb strorage
- usb net asix
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Checking the status field of the qTD token in the current code
do not take into acount cases where endpoint stall (halted) bit
is set together with XactErr status bit. As a result clearing
stall on an endpoint won't be done if this status bit was also
set. Check for halted bit and report USB_ST_STALLED status
if the host controller also indicates endpoit stall condition.
From u-boot by Anatolij Gustschin <agust@denx.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the current mmu support is broken
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
LAN9221 is eth1, FEC is eth0, so fix power/reset control by
MC13892 GPOs.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch removes SDRAM memory size setting from board due
to auto detect last one by ESDCTL.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to boot from NAND/MMC and others.
This version of bootstrap is a non shell version of barebox compressed by the
pbl.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to have a generic code to create different bootstrap
As example
Barebox as TI Xloader
Barebox as AT91 Bootstrap
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of hardcode define use a struct that the board fill
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so in bootstrap we do not compile it
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
to detect if it's a barebox for the current running arch
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The pattern for i.MX boards starting in external NAND boot mode is always
the same:
- Check if we are running in NFC address space, if not call
board_init_lowlevel_return()
- copy binary to link address
- execute relocated binary
- call imx_nand_load_image()
Add a common function for this to make the board code easier.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
include/environment.h is no longer necessary to build scripts/bareboxenv,
so remove its inclusion.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
environment.h is for environment variables, not for the environment
storage (envfs), so move the prototypes to envfs.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently Kconfig dependencies are used to allow non-interactive builds.
This leads to problems in Kconfig getting the dependencies right.
This patch adds a barebox_main function pointer which is called at the
end of the startup process. This defaults to run_shell when a shell is
enabled.
With this the HAVE_NOSHELL Kconfig variable can be removed. Non interactive
builds can now be enabled for every board allowing to compile a binary
without further Kconfig dependencies. This also allows for more flexibility,
for example boards may decide to try non-interactive startup first and
call run_shell if that fails.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can use to check pbl
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The end of SDRAM is at 0x9fffffff, not at 0x8fffffff. This fixes starting
barebox when it is located in the second SDRAM bank.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On the MX27 based board phycard-i.MX27 the display won't properly
come up.
Before removing imx-regs.h and the code that sets the register
in the i.MX video driver, the PCCR registers were set _after_
the screen start (LSSAR) was set.
This restores that old behaviour and makes the display come up
properly again.
I did not have a chance to test this on any other i.MX27 or i.MX21
hardware though I assume that the "old" order is required there
too.
Signed-off-by: Daniel Mierswa <d.mierswa@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also put those names solely in the .c file as it's done with
the i.MX27 code.
Signed-off-by: Daniel Mierswa <d.mierswa@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Got this compile warning if MTD_WRITE support isn't set.
drivers/mtd/core.c: In function 'mtd_ioctl':
drivers/mtd/core.c:117:26: warning: unused variable 'ei' [-Wunused-variable]
Add a #ifdef to declaration of variable 'ei' to solve it.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>