The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We do not need to invalidate the cache in the poll loop anymore
since the corresponding bit is now in a dma coherent area. Instead,
flush cache before hardware operation and invalidate afterwards. Put
the corresponding code inline since it's shorter.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There's no point in syncing them manually. Instead, use
dma_alloc_coherent and skip the manual flushing/invalidating.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is based on the following U-Boot commit:
commit 5f4b4f2fed3ab8590c8c06b78642f8c1467acacf
Author: Vincent Palatin <vpalatin@chromium.org>
Date: Mon Dec 5 14:52:22 2011 -0800
ehci: speed up initialization
According to EHCI specification v1.0, the controller should stabilize
the power on a port at most 20 ms after the port power bit transition.
So, we put this setting in the virtual descriptor corresponding field,
(bPwrOn2PwrGood = 10 => 10 x 2ms = 20ms), this saves about 500ms at each
controller initialization/enumeration.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
for chache handling the ehci driver iterates over the hardware lists
of QHs/TDs. As we have a fixed number of maximum entries in this lists
we can allocate them as arrays and and clean/invalidate the arrays
instead which is much simpler. While at it, move the allocation to
ehci_probe so that we do not lose memory each time ehci_init is called.
Also, use memalign to allocate the QHs/TDs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
pass the hccr and hcor register base via resource
instroduce add_generic_usb_echi_device with hccr = base + 0x100 and
hcor = base + 0x140
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
move to linux usb driver organisation
as following
drivers/usb/core
drivers/usb/gadget
drivers/usb/host
drivers/usb/otg
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>