The state framework grew organically over the time. Unfortunately the
architecture and abstractions disappeared during this period.
This patch refactors the framework to recreate the abstractions. The
main focus was the backend with its storage. The main use-case was to
offer better NAND support with less erase cycles and interchangeable
data formats (dtb,raw).
The general architecture now has a backend which consists of a data
format and storage. The storage consists of multiple storage buckets
each holding exactly one copy of the state data. A data format describes
a data serialization for the state framework. This can be either dtb or
raw. A storage bucket is a storage location which is used to store any
data. There is a (new) circular type which writes changes behind the
last written data and therefore reduces the number of erases. The other
type is a direct bucket which writes directly to a storage offset for
all non-erase storage.
Furthermore this patch splits up all classes into different files in a
subdirectory.
This is currently all in one patch as I can't see a good way to split
the changes up without having a non-working state framework in between.
The following diagram shows the new architecture roughly:
.----------.
| state |
'----------'
|
|
v
.----------------------------.
| state_backend |
|----------------------------|
| + state_load(*state); |
| + state_save(*state); |
| + state_backend_init(...); |
| |
| |
'----------------------------'
| | The format describes
| | how the state data
| '-------------> is serialized
| .--------------------------------------------.
| | state_backend_format <INTERFACE> |
| |--------------------------------------------|
| | + verify(*format, magic, *buf, len); |
| | + pack(*format, *state, **buf, len); |
| | + unpack(*format, *state, *buf, len); |
| | + get_packed_len(*format, *state); |
| | + free(*format); |
| '--------------------------------------------'
| ^ ^
| * *
| * *
| .--------------------. .--------------------.
| | backend_format_dtb | | backend_format_raw |
| '--------------------' '--------------------'
|
|
|
v
.----------------------------------------------------------.
| state_backend_storage |
|----------------------------------------------------------|
| + init(...); |
| + free(*storage); |
| + read(*storage, *format, magic, **buf, *len, len_hint); |
| + write(*storage, *buf, len); |
| + restore_consistency(*storage, *buf, len); |
'----------------------------------------------------------'
|
The backend storage is responsible to manage multiple
data copies and distribute them onto several buckets.
Read data is verified against the given format to
ensure that the read data is correct.
|
|
|
|
|
v
.------------------------------------------.
| state_backend_storage_bucket <INTERFACE> |
|------------------------------------------|
| + init(*bucket); |
| + write(*bucket, *buf, len); |
| + read(*bucket, **buf, len_hint); |
| + free(*bucket); |
'------------------------------------------'
^ ^ ^
* * *
* * *
A storage bucket represents*exactly one data copy at one
data location. A circular b*cket writes any new data to
the end of the bucket (for *educed erases on NAND). A
direct bucket directly writ*s at one location.
* * *
* * *
* * *
.-----------------------. * .-------------------------.
| backend_bucket_direct | * | backend_bucket_circular |
'-----------------------' * '-------------------------'
^ * ^
| * |
| * |
| * |
| .-----------------------. |
'--| backend_bucket_cached |---'
'-----------------------'
A backend_bucket_cached is a transparent
bucket that directly uses another bucket
as backend device and caches all accesses.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
bit_to_flip might be negative if any uncorrectable bitflips
occured. Use int instead of unsigned type in order to properly
propagate the error.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The raw state backend uses crc32 unconditionally, so make
sure it's present.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now that GLOBALVAR and NVVAR are user visible options they need
to be selected when selecting the global and nv command support
which uses them.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The 'baudrate' parameter has the wrong value initially, it has to
be set to CONFIG_BAUDRATE. Otherwise a devinfo shows a baudrate of 0
until actively changed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The commit
commit 5e335773e0
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue Mar 29 10:06:46 2016 +0200
imd: use struct imd_header * as argument
introduces additional imd type checks like this
if (!imd_is_string(imd->type))
return NULL;
These checks work incorrectly on any big-endian machine
because the imd->type field needs addition conversion
to little-endian byteorder before use.
Here is the imd command output on big-endian qemu-malta:
barebox:/ imd /dev/nor0.barebox
release: <NULL>
build: <NULL>
This patch fixes the problem by adding necessary conversion
via imd_read_type().
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In commit 4a7534bf07 ("reset-source: Allow different priorities") the
function name changed from reset_source_set to reset_source_set_priority.
Do that change in EXPORT_SYMBOL() accordingly.
reset_source_set still exists but is a static inline now.
Fixes: 4a7534bf07 ("reset-source: Allow different priorities")
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When the bootm code is not called directly by the bootm command it is
useful to control the verbosity with a globalvar. This introduces
global.bootm.verbose for this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now that the bootm code can be used without the command, we have to
move the magicvar descriptions from the command code to the common
bootm code aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The verify "available" mode checks whatever is available in the
booted image, so when an image has a signature, it is checked and
must be correct and when an image is hashed, it is also checked
for correctness.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When CONFIG_BOOTM_FORCE_SIGNED_IMAGES is enabled bootm_verify_mode
shall be forced to "signature", so set bootm_verify_mode to this
value during startup. Otherwise it shows up as "<NULL>" in devinfo.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
when fit is configured to force signed images then print an error
message when an unsigned image is opened to give the user a clue
what went wrong.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When fit is configured to check hashes print an error when an image
does not contain hashes instead of failing silently.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The code already tests for this option, but it does not
yet exist. Add the option to force using signed images.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
bootm has a C API, so the bootm options have to depend on the
option providing the bootm code (CONFIG_BOOTM), not on the
option providing the command (CONFIG_CMD_BOOTM). Fixing the
dependencies makes it possible to fully use bootm from C without
enabling the bootm command support.
This also removes the CMD_ prefix from the options which means
we have to update the defconfigs aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit bc31d85c6e ("cdev: Add partuuid string to struct cdev") added
partuuid strings for dos partitions but only for the (up to) four
primary partitions. Do the same for the logical partitions. Their
numbers start at 5 independently of the number of available primary
partitions.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bootm code now can handle the adding of the root= option itself,
so drop the code and let bootm do it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It becomes a common case that the Kernel is loaded from the filesystem
which later becomes the rootfs. This adds a possibility to let bootm
automatically append the root= option to the kernel command line. This
is done when global.bootm.appendroot is true.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
nvvar support not only needs globalvar, but also persistent
environment storage. Add a separate default-y option which
depends on ENV_HANDLING for this case. Make the option visible
to let the user decide whether he wants to have this option
and add a help text to make this decision easier.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ENV_HANDLING is usable even without explicit loadenv/saveenv command
support. Instead of selecting this option from loadenv/saveenv, make
this option visible. loadenv/saveenv can then depend on ENV_HANDLING
rather than selecting it. This reduces Kconfig dependencies hassles.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently global environment variables are only enabled when the
"global" command is enabled. In fact, they could be used even with
the "global" command disabled, so make the GLOBALVAR option visible.
While at it, add a help text for this option.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
State support does not need OF_BAREBOX_DRIVERS and never did, so drop
the dependency there. It's the state driver which needs of_find_path(),
since this symbol now is always enabled when OF is enabled, we don't
have to add the dependency to the state driver, but instead can depend
on OFDEVICE. We could depend on OF instead, but compiling the state
driver without OFDEVICE makes no sense.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is the final step to separate the ubiformat code from the
command. With this the ubiformat code gains a C API.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
FLEXIBLE_BOOTARGS also works without command support being enabled.
Move this option from commands/Kconfig to common/Kconfig so that
it doesn't depend on COMMAND_SUPPORT.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When an ARM kernel is built with CONFIG_EFI enabled, then the
kernel image also looks like a EXE file. Move ARM zImage detection
before EXE detection so that the kernel is still detected as zImage.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
fixes: 81737c1 mtd: Fix erasing of devices >4GiB
Several places erased a complete flash partition passing ~0 as count to
erase(). With the above commit count to erase was changed from an unsigned
type to a signed type, so the (count > f->size - offset) check in
erase() no longer triggers and the ~0 count is no longer adjusted to the whole
device size. Among other things this results in saveenv failures on NOR
flashes.
This patch fixes this by introducing an explicit macro for erasing the
whole device which is tested for in erase(). All other negative values
are rejected.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Giorgio <giorgio.nicole@arcor.de>
add vi like key support:
j: down
k: up
<Space>: select
Signed-off-by: Du Huanpeng <u74147@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have defined stdin, stdout and stderr as integer file descriptors,
but normally they should be FILE *. Also fprintf, fputc and fputs take
file descriptors instead of FILE *. As FILE * are inconvenient in the
barebox environment replace the f* functions with the corresponding d*
functions. dprintf is POSIX conform whereas dputc and dputs are barebox
specific, but do not conflict with any stdc function. fgetc is unused
and can be removed without replacing it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have a shortcut for fprintf(stderr, so use it. This is done to
be able to remove fprintf in the next step.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The function we have implemented as getc has the semantics of the
standard function getchar, so rename it accorgingly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Our asprintf and vasprintf have different prototypes than the glibc
functions. This causes trouble when we want to share barebox code
with userspace code. Change the prototypes for (v)asprintf to match
the glibc prototypes. Since the current (v)asprintf are convenient
to use change the existing functions to b(v)asprintf.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>