9
0
Fork 0
Commit Graph

8 Commits

Author SHA1 Message Date
Alexey Galakhov 2d88cc4c91 Add support for Samsung S3C24x0 framebuffer.
Heavily based on original Juergen Beisert's code.

Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19 20:37:45 +02:00
Juergen Beisert e0965c4d56 S3C24xx/NFC: Consider correct NAND page size for boot.
When booting from NAND, its important to know the correct page size. When
the NAND is used as the boot source, four dedicated pins are used to configure
the correct page size and address cycles. These pins can be read back in one
of the NFC registers to parametrize the load function.

This patch also extends the read routine to support more than four address
cycles on demand.

BTW: At least some mini2440s are misconfigured to use five address cycles for
a NAND device that is known to need only four address cycles. In this case the
vendor is at our side: This NAND simply ignores any additional address cycles
than required.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-14 12:11:19 +01:00
Juergen Beisert 073f39c95e MACH-S3C24XX: Add support for flash based BBT
The default configuration of the current 2.6.37 kernel uses a flash based BBT.
So, barebox must also use one, to be in sync with the kernel about bad blocks
in the flash.

Due to the used OOB layout, the generic BBT description coming with the
framework can be used.

Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-03 16:15:52 +01:00
Juergen Beisert d86f8a26f9 MACH-S3C24XX: Fix typo in UART2_SIZE macro
Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-03 16:15:52 +01:00
Juergen Beisert 138ae146fb Add GPIO support and GPIO setup features to the S3C processors
This patch adds genetic GPIO support to all S3C2440 processor based systems.
Also it adds definitions to setup the pin multiplexer in a way the other
architectures do.

Note: Tested on a S3C2440 based system only. But should work on an S3C2410, too.

Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-22 19:25:05 +02:00
Juergen Beisert 3bf1bd9b33 Add S3C2440 MCI card support
Adding MCI card support for S3C2440 CPUs. This is for reference only, as there
is currently no user in the barebox tree. Maybe one with access to the A9M2440
development kit can check it on his/her system.
Checked here with my own S3C2440 based system which is not in the barebox tree.

Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11 13:08:27 +02:00
Sascha Hauer 40a5f3de4e Merge branch 'for-sascha' of git://uboot.jcrosoft.org/u-boot-v2 into from-jean
Conflicts:
	board/a9m2440/a9m2440.c
	board/pcm043/pcm043.c
	drivers/nand/nand_imx.c

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-10-28 10:10:56 +01:00
Jean-Christophe PLAGNIOL-VILLARD f6a579da9c [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-10-22 14:21:25 +02:00