This patch updates the definitions of the __raw_read and __raw_write
functions so that "sparse" doesn't complain.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The tags for the command line parameters are not used, so let's remove them:
- CMDLINE_TAG
- SETUP_MEMORY_TAGS
- INITRD_TAG
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
EP93xx: The system controller register definition doesn't take into account a 4
byte gap between ChipId and SysCfg, in consequence all accesses to syscon registers
ahead of ChipId fail. Fix this by inserting a filler field
Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These cache functions have been extracted from
arch/arm/boot/compressed/head.S. The old code only worked
properly on ARMv4. Tested on ARMv4, ARMv5, ARMv6 hardware.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Using these macros simplify the configuration for special GPIO usage. But they
should use correct bit positions for usage in the IOMUX_PAD() macro.
Note: These are the bit positions of the i.MX35 CPU. Not checked for the other
i.MX3x CPUs.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Recent changes to the nand_imx driver broke it for i.MX21 systems;
the i.MX21 NAND controller is more akin to the one in i.MX27/i.MX31,
than to the one in i.MX25/i.MX35.
Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On at91 we talk directly to the reset controller to reset the cpu,
rather than use the watchdog, so update the comment to match.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Other architectures are supporting the uImage format used by barebox's 'bootm'
command. x86 does'nt. So, we need a special command to be able to boot the
x86 specific bzImage format.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a low level disk drive communication driver. It uses the real mode
BIOS found on most x86 platforms, to read and write sectors. Used by the
generic disk driver.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This code uses the always (hopefully) existing PIT device to get the time
reference for barebox.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This code adds a generic x86 platform, enabling barebox to act as a
bootloader like 'GRUB'. Very minimalistic, yet. Supports only a serial console
and is tested with QEMU only.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These functions are special: They are running in the 16 bit real mode world
to bring up barebox on an x86 box.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add some generic functions to make barebox work on x86.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add some generic required code to make barebox work on x86.
Note: Resetting the CPU is unfinished yet. I need some ideas how to reset
this kind of architecture gracefully.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add architecture header files. Some of these files are empty, they only must
exists to make the build system happy.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix incorrect path specs in the documentation for adding an ARM based
CPU (MACH) to the tree
Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
--
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Based on a suggestion from S. Hauer, we don't currently need any IDE
support, but we can always add it back later if we choose. There
don't appear to be any other IDE-related source files in the tree.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The correct config variable is CONFIG_MODULES, so tweak any references
to the incorrect CONFIG_MODULE.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
