since the switch to common clock, ethernet driver doesn't works and
and access to the network leads to :
eth0: Read MDIO failed...
unable to handle NULL pointer dereference at address 0x000000c7
The problem is that bit 31 (SLEEP) of register HW_CLKCTRL_ENET is kept
to its default value (1) which means : "put Ethernet block in sleep mode.
CLK_H_MAC0(1), CLK_H_MAC0(1)_S, and CLK_ENET0(1)_TX are gated off.
Ethernet can be wakeup remotely in sleep mode"
In that case the FEC don't get its clock.
This patch fix the problem by toggling this bit when FEC's clock is
enabled.
Tested on i.MX28EVK.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the check is wrong as when the clock rate is correctly set
the function will return 0.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
when the bootmode is different than NAND (USB for example), the
GPMI clock is not enabled thus we can't probe a NAND flash.
Tested on an i.MX28
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
since the switch to common clock, SPI driver reports :
MXS: Timeout resetting block via register 0x80014000
mxs_spi mxs_spi2: MXS SPI: Timeout waiting for start
The reason is that the clock is not enabled anywhere in
the driver.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this fix :
drivers/serial/serial_auart.c:49:22: fatal error: mach/mxs.h: No such file or directory
and
drivers/serial/serial_auart.c: In function 'auart_serial_init_port':
drivers/serial/serial_auart.c:174:2: warning: implicit declaration of function 'stmp_reset_block' [-Wimplicit-function-declaration]
only compile tested ATM
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this fix :
drivers/spi/mxs_spi.c:29:22: fatal error: mach/mxs.h: No such file or directory
and
drivers/spi/mxs_spi.c: In function 'mxs_spi_setup':
drivers/spi/mxs_spi.c:102:2: error: too few arguments to function 'stmp_reset_block'
include/stmp-device.h:21:12: note: declared here
only compile tested ATM
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Import of_find_node_by_type from Linux drivers/of/base.c -
commit id d8dfad3.
This function retrieves a node pointer based on the "device_type"
property of the node.
This is used by device tree update functions in PPC support.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
commit f64ed12b accidentally swap fclk_rate from am33xx and omap3.
Revert this change.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add function for indirect access of the mmd registers, based on linux.
phy_read_mmd_indirect
phy_write_mmd_indirect
Also clean some private mmd functions
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The driver is already capable of 8 bit buswidth support, so advertise
it to actually make use of it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
According to the SD Host Controller Specification Version 3.00, the ADMA error
status bit is on the wrong bit. Fix this.
While at it, add the missing standard error status bits.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds of_clk_providers for core clocks and clock gates found on
Marvell MVEBU SoCs (Armada 370, Armada XP, Dove, and Kirkwood).
It is based on Linux clock providers with clock flags removed, as they
are not used on Barebox.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of calling of_get_model() in barebox_get_model() add a
barebox_set_model() and use it to set the boardinfo once it's
available from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise only the internal DT is modified, not necessarily the one passed
to the kernel.
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_get_tree_max_phandle - get the maximum phandle of a tree. Needed for
creating new phandles without conflicts.
of_node_create_phandle - create a phandle for a node which doesn't have one.
of_find_node_by_alias - find a node by alias name
of_find_node_by_path_or_alias - find a node by full path or alias name
of_find_root_node - find the root node for a given device node
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In merge mode a property may be overwritte with new values. When
this happens the length has to be adjusted.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is no reason to print used region each time.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format.
No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
print_hex_dump is a standard kernel function, so move it outside
the ubi header files to make it usable for other code derived from
the kernel aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We do not have ubi_do_get_volume_info and ubi_do_get_device_info
and do not need them yet, so remove calls to these functions to fix
compilation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Our devicetree printing is close to correct dts syntax, so fix
some remaining differences:
- Use an equal sign instead of a colon to separate a poperty name and
a value
- Add a semicolon at the end of properties
- Make sure we do not print a separator for empty properties
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Eric Bénard
Sascha Hauer
Renaud Barbier
Jan Weitzel
Steffen Trumtrar
Sebastian Hesselbarth
David Jander
Alexander Shiyan