With CONFIG_PARTITION_NEED_MTD enabled we use mtd rather than devfs
directly to create partitions on mtd devices. Since:
| commit b32cd8df87
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date: Wed Apr 9 15:49:32 2014 +0200
|
| mtd: nand: bb: use mtd api directly
|
| The devfs layer just adds an addition indirection between mtd
| and the bb devices with no purpose. Drop it.
|
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bad block aware device creation doesn't work if this option
is disabled. With this we remove CONFIG_PARTITION_NEED_MTD and always
use mtd partitions on mtd devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If there's packet loss and the remote server needs to retransmit,
there is falsely no timeframe left because TIMEOUT (server wait time)
and TFTP_TIMEOUT (abort timer) are the same.
This patch increases TFTP_TIMEOUT.
See RFC2349 for more info: http://tools.ietf.org/html/rfc2349
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
__devfs_add_partition returns the newly created cdev, but in case
of mtd partitions it accidently returns 0. Fix this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
By default UBIFS is very verbose. Decrease the verbosity, turn
printf messages into ubifs_ messages and add device parameters
for the values which are not printed anymore.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Compared to devfs_add_partition which adds a single partition
devfs_create_partitions creates several partitions at once. One nice
benefit is that this simplifies appending partitions because the start
of the latter partition doesn't need to be specified explicitly.
Also dev_add_bb_dev() is called by the new helper if the bbname is
specified for a partition.
Note that adding partitions is also more flexible now (also via
devfs_add_partition) because negative values for offset and size now
have a proper meaning instead of creating broken partitions.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The value is only used to assign to a (*struct cdev)->flags which is an
unsigned int and it is passed as fourth parameter of mtd_add_partition which
is an unsigned long.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Copying files to tftp is broken since:
| commit d4f5bb1e01
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date: Sat Sep 28 13:12:50 2013 +0200
|
| copy_file: Add missing O_TRUNC
|
| Without it, when copying a smaller file over a larger file the
| resulting file still has the remaining space from the larger file.
|
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since this commit copy_file passes O_TRUNC to open(). This results in the
fs layer calling fsdrv->truncate. tftp returns -ENOSYS here and open returns
with an error. To fix this return 0 for the truncate callback in tftp. Also
enforce the O_TRUNC flag when opening a file for writing on tftp as the files
are always truncated on tftp anyway.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: andreas.willig@rafi.de
So far mtd partitions were mtd devices, but these were not registered.
This patch changes this. mtd partitions are now registered like real
mtd devices. This makes them part of the device hierarchy.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
At least NFS does not fulfill read requests > 1024 bytes at once.
Use read_full in read_file as read doesn't guarantee that the
whole request can be read at once.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Correct formatstring of size_t is %zu otherwise we get:
fs/bpkfs.c: In function ‘bpkfs_probe’:
fs/bpkfs.c:440:3: warning: format ‘%d’ expects argument of type ‘int’,
but argument 5 has type ‘size_t’ [-Wformat=]
dev_dbg(dev, "%d: offset = %d\n", i, d->offset);
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows to use unfs3 on the server side which doesn't integrate into
portmap/rpcbind which results in the port not being impossible to lookup
via rpc calls to the portmap program.
Use it like:
mount -t nfs -o port=2703,mountport=2703 192.168.77.157:/root /mnt/nfs
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Similar to mount(8) the barebox command mount now supports passing a string
to the file system driver via -o.
This is used in the next commit to let the user specify port numbers for
nfs mounts.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This was tested against nfs-kernel-server and unfs3.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
While at it also fix the type of flen holding a string length
(int -> size_t).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of letting rpc_lookup_req set mount_port and nfs_port, let it
return the port found and let the caller use that information.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a former transaction was aborted by hitting Ctrl-C the old reply might
still hang in the ethernet controller making all further transactions fail.
So just skip over old replies.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We're speaking rpc mount version 2 (i.e. the same version as the
implemented nfs protocol), so also specify that in the lookup.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Implement the readlink entry point for future use by the DA923RC.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ubiformat needs the subpagesize to work correctly. The kernel uses
sysfs to pass the subpagesize, but in barebox we have the possibility
to extend struct mtd_info_user. Add a corresponding field and use it
in ubiformat.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A chdir to a path registered as an automount path followed by a 'ls'
results in an endless loop. This happens because the command the
automounter executes results in another automount request.
Fix this by running the automounter from the chdir code before
the cwd is actually changed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The O_TRUNC flag has to be ignored when opening devices. Otherwise
cp /somefile /dev/somedev fails. This is broken since:
| commit d4f5bb1e01
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date: Sat Sep 28 13:12:50 2013 +0200
|
| copy_file: Add missing O_TRUNC
|
| Without it, when copying a smaller file over a larger file the
| resulting file still has the remaining space from the larger file.
|
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Simple update file format developed for Somfy, tools and library are
available under LGPLv2 (https://www.gitorious.org/libbpk).
This format in the v1.0 allow you to store 6 types a binary stream for
a unique hardware id:
- bootloader
- bootloader_version
- description.gz
- kernel
- rootfs
- firmware_version
and you can easly add more binary stream type.
The fs will display you in a directory per hw id
and if a binary stream type is unknown will be display
as unknown_%08x
# mount image.bpk /tmp
# ls -l /tmp/hw_id_0/
-rwxrwxrwx 10 firmware_version
-rwxrwxrwx 8 firmware_version.crc
-rwxrwxrwx 1845968 kernel
-rwxrwxrwx 8 kernel.crc
-rwxrwxrwx 5062656 rootfs
-rwxrwxrwx 8 rootfs.crc
-rwxrwxrwx 248 bootloader
-rwxrwxrwx 8 bootloader.crc
-rwxrwxrwx 248925 description.gz
-rwxrwxrwx 8 description.gz.crc
-rwxrwxrwx 4 bootloader_version
-rwxrwxrwx 8 bootloader_version.crc
-rwxrwxrwx 4 unknown_1234567g
-rwxrwxrwx 8 unknown_1234567g.crc
Why BPK and not CPIO or uImage
1) CPIO
cpio does not handle > 4GiB image and does not have any crc checksum
2) uImage
uImage only provide one crc32 for the all data part and only a list of binary
stream with no information about what is what (in multi-image format)
3) BPK
BPK provide a crc32 for the header part and one crc32 per binary stream
so if you does not care of some data you are not force to check them
And you known exactly the binary stream type and for which hw to
use it.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Fargier Sylvain <sylvain.fargier@somfy.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All filesystem drivers which need a backingstore device do the same
ignoring of '/dev/' in the backingstore followed by a cdev_open. Add a
helper function for it and let the core handle the cdev. As a side
effect this makes sure that fsdev->cdev is also set when a device is
mounted without the leading '/dev/' which was previously ignored
by the mount code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will provide the image data and information via file
# ls -l /tmp/
-rwxrwxrwx 3 arch
-rwxrwxrwx 12 compression
-rwxrwxrwx 16 name
-rwxrwxrwx 5 os
-rwxrwxrwx 24 time
-rwxrwxrwx 12 type
-rwxrwxrwx 10 load_addr
-rwxrwxrwx 10 entry_point
-rwxrwxrwx 2199875 data0
-rwxrwxrwx 2199875 data
-rwxrwxrwx 10 data.crc
if it's multi image
# ls -l /tmp-multi/
-rwxrwxrwx 3 arch
-rwxrwxrwx 12 compression
-rwxrwxrwx 16 name
-rwxrwxrwx 5 os
-rwxrwxrwx 24 time
-rwxrwxrwx 16 type
-rwxrwxrwx 10 load_addr
-rwxrwxrwx 10 entry_point
-rwxrwxrwx 1292 data0
-rwxrwxrwx 983 data1
-rwxrwxrwx 2287 data
-rwxrwxrwx 10 data.crc
you can get the image header via an ioctl on any file
UIMAGEFS_METADATA
if you want to check the crc do
# crc32 -f /tmp-multi/data -V /tmp-multi/data.crc
CRC32 for /tmp-multi/data 0x00000000 ... 0x000008ee ==> 0x88d5a0db
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds ubifs support from u-boot-2013.07. This is taken
mostly as-is, only the necessary adjustments to attach to the
barebox fs layer have been made.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
cdev_open() opens a cdev by name. This introduces cdev_do_open which
allows to open a cdev when the cdev is already found by other means.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
currently most partition cdevs have the name <devname>.<partname>
This makes it hard to find a partition by <partname>. This introduces
a partname field in struct cdev so that.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>