We need to retrieve the device id in device tree/non device tree case.
Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Other functions use pin_to_controller to retrieve a at91_gpio_chip structure,
so fix pin_to_controller to return the correct value.
Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds the driver data for the gpio-at91 driver.
Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit 3843bfd0ab
"serial: imx: Determine device name from device tree"
broke this driver for non-devicetree boards, since
of_alias_get may not be called with a NULL pointer
as first argument.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This driver is based on mach-at91/gpio.c and linux pinctrl driver.
The driver contains the gpio and pinctrl parts (like in linux) because the two parts
share some structures and logics.
Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
By retrieving the ecc_mode from pdata we can use the same code for device tree and
non device tree probing. Which was not possible before, because ecc_mode was arbitrarily set to
NAND_ECC_SOFT.
Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
By adding this structure member, we can retrieve the pmecc config, through the device tree.
Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch modifies the Rockchip pinctrl driver to comply with the new
DT bindings, which use two syscon nodes to specify the address of
memory resources.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch defines a OF compatible property for the syscon driver to
allow it to be probed from device tree.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds NAND support for the controller present in Kirkwood SoCs.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have our file helper functions in several places. Move them
all to lib/libfile.c.
With this we no longer have file helpers in fs/fs.c which contains
the core fs functions and no functions in lib/libbb.c which are
not from busybox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current fixup code is slightly wrong, and only works when the
root address cell number is one.
However, Armada XP has a root address cell number of two. In this case
we are currently applying the fixup on the child high base address,
while it should be applied on the child low base address.
Fix it and add some detailed explanation to avoid having to figure this
out each time.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for the RTC unit on Ingenic JZ4740, JZ475x and JZ477x SoCs.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Current ds1307 rtc driver supports only ds1307 and ds1338 chips;
it has no nvram support at the moment.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We interpret the ECC option "bch8" as OMAP_ECC_BCH8_CODE_HW, but the
Kernel uses OMAP_ECC_BCH8_CODE_HW_ROMCODE in this case instead. To make
the interpretation of the ti,nand-ecc-opt property compatible to the
Kernel we have to use OMAP_ECC_BCH8_CODE_HW_ROMCODE for "bch8"
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Check for the return value of devfs_add_partition with IS_ERR.
Otherwise we dereference a NULL pointer when devfs_add_partition
fails.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also move reset_cpu() for jz4755 SoC from platform code
into the new driver code.
At the moment mach-xburst lacks clk support so jz4740 watchdog
driver looks like a template. We can improve jz4740 watchdog
driver later after adding clk support.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Here is compiler's message:
drivers/led/led-triggers.c:148:5: warning: no previous prototype for 'trigger_init' [-Wmissing-prototypes]
int trigger_init(void)
^
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Here is a sample crash log on Ritmix RZX-50:
barebox:/ trigger
0: panic
1: heartbeat
2: net rx
3: net tx
4: net
5: default on (led 0)
barebox:/ trigger -d 5
...
Ooops, TLB miss on store!
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This driver is also used for Allwinner SoCs I2C controllers.
Ported from linux-3.15.
The most notable barebox driver version changes:
* drop platform device stuff;
* drop "allwinner,sun*" stuff;
* drop message offloading support;
* add reg-io-width devicetree parameter to use driver
with byte-oriented controller versions.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
On Armada XP:
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
