edev->recv has to be called with edev as argument, not eth_current.
This fixes networking when multiple network devices are used and the
current one is switched during runtime.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The help texts are parsed by sphinx which cannot handle macros, so
replace them with their values.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
"ifconfig" and "ip" from normal Linux userspace shows ethernet addresses
normally in lowercase. And the %pM format specifier in Linux does that,
too. Conform to this custom formatting.
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In barebox network packets always go out at the current ethernet
device and are expected to be received from the current interface.
This has some side effects. When for example an NFS is mounted when
one interface is active and the interface is changed afterwards the
NFS packets leave the new interface, but the NFS server won't be
reachable there.
Instead of changing the whole network traffic to the current ethernet
interface we now initialize a network connection with the current
network interface, but then the connection will continue to use that
interface even when the current interface is changed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When doing an ifup set the current interface to the one just
brought up so that it is actually used.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this places the command into the "Network commands"
section of Kconfig
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this compile option actually turns on a command, so name it
accordingly
* also move the Kconfig definition into commands/Kconfig, thus
placing getopt into the "Network commands" section
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this compile option actually turns on a command, so name it
accordingly
* also move the Kconfig definition into commands/Kconfig, thus
placing getopt into the "Network commands" section
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
... because NET_RESOLV can be used alone to turn on the functionality
of resolv().
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:
* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
is listed by character in this (short) option string (the long
description is in the long help text, as before)
* help texts have been reworked, to make them
- sometimes smaller
- sometimes describe the options better
- more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
compiled long help texts
* 'help -v' gives a list of commands with their short description, this
is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.
The old output format (plus grouping) is now available with 'help -v'.
Example:
Information commands:
?, devinfo, help, iomem, meminfo, version
Boot commands:
boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
...
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The command always sets the MAC address of the interface in the code path.
For the static network configuration case it sets it again, due to the
environment variable keyword ("ethaddr") is listed again in the table.
Remove this keyword from the table, because the MAC is already set.
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since commit a162dfe503 the ifup command is
implemented in C and runs up to two external scripts.
If one of these scripts return with an error code, the command terminates
silently. This can confuse a user because there is no hint about the reason
why it fails. Add error messages to avoid this case.
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a convenience function to register a MAC address device
parameter. The only current user is converted to use it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When no connection is opened we should not call into
the networking stack. Otherwise it can happen that we
delay further execution until the network stack detected
a link (or timed out bringing the link up).
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The defaultenv-2 has ifup support as a shell script. This patch
replaces it with a command which is more robust, can be called
from C and now can also bring up all configured interfaces.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise we loose memory on each device_unregister. The ethernet
code used to do this before calling unregister_device. This can
now be removed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
free() already checks the pointer to be non
NULL. No need to do it again.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If drivers want to fixup their specific instance they need some context
to know which instance they have to fixup.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
None of the driver make the difference between STDOUT and STDERR.
So we just need to check if putc or getc are filled in the console_device
save 32 bytes on versatilepb
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If a network device has not been registered from the devicetree, we may
still find it by its alias in the devicetree. This way also platform based
network devices can obtain a valid MAC address in the devicetree.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The boards often have a sane default for the hostname. Provide a C
function for setting/getting it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Calling globalvar_add_simple() and setting a value is more than common.
Add a parameter for the initial value.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Checksum calculation on data including its own checksum (as is the case with
IP headers) should give 0xffff before bit flipping. Current code works well
for the correct checksum case, but fails to identify errors.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
eth_of_fixup() is passed a devicetree, so use this one instead
of the internal devicetree. This makes sure it also works when
the tree to fixup is not the internal one.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Linux normally has no idea how to retrieve MAC Addresses, but instead
expects the MAC address in the devicetree. This patch adds the MAC
address to the devicetree for Linux if we find a valid one in barebox.
This mechanism is limited of course to devices barebox has a driver for
and which are probed themselves from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We already have a possibility to register a MAC address provider
based on a ethernet device id. This adds a similar functionality
for devices probed from devicetree. Code can register itself to
be a MAC address provider for a certain devicetree node.
This helps on i.MX to let the IIM unit provide a MAC address for
the FEC.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When the dhcp code discovered the tftp-server-name option it immediately
tries to resolve the name. This can't succeed since the we are somewhere
in the dhcp processing and the nameserver may not even be known.
Fix this by resolving the name when dhcp is completed. While at it, do
this in a way that net_set_serverip is only called when resolv() returns
something useful. Otherwise we may end up overwriting a previously
configured serverip which came from the bootp bp_siaddr field.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>