Some USB ports only have one possiblitly for the phy_type and
the type is not specified in the devicetree in this case.
Rely on the reset default instead of failing.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.
The old output format (plus grouping) is now available with 'help -v'.
Example:
Information commands:
?, devinfo, help, iomem, meminfo, version
Boot commands:
boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
...
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
From 4ea2bd2e1ca18136d7cfd61643bc8d8187b1495f Mon Sep 17 00:00:00 2001
From: Owen Kirby <osk@exegin.com>
Date: Wed, 16 Apr 2014 17:45:18 -0700
Subject: [PATCH] Fix AT91 UDC driver on boards without vbus.
While porting Barebox to one of our boards, we found that the AT91 UDC driver
will fail to connect to USB hosts, and will spam the console with errors if
the VBUS pin isn't connected.
Signed-off-by: Owen Kirby <osk@exegin.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This most likely doesn't fix any real bugs, but it's the
right thing to do and reduces the noise level with static
checkers.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When no udc is registered it is clearly an error when usb_gadget_poll
is called. Let the upper layers know that.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
free() already checks the pointer to be non
NULL. No need to do it again.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On the pcm038 the ULPI phy is found correctly, but after
a power cycle the attached devices are not found. Adding
some delay fixes this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The ULPI code does not print a message when the operation times
out. Add one to the caller so that he gets an idea that something
is going wrong.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
imx_chipidea_port_init() will be called during startup from
the ehci driver. Calling it before setting up the PORTSC register
is only necessary in HSIC mode.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
i.MX5x OTG port is hardwired to the internal UTMI PHY, so having
this configurable makes no sense and helps using this port with DT.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since the mainline kernel now has its own dr_mode and phy_type DT-options
for setting modes of USB ports, do these kernel parameters compatible by
removing "barebox" prefix.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Host with inoperable ULPI able to bring the system into an
infinite loop. The patch adds error checking during initialization
to avoid this.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
None of the driver make the difference between STDOUT and STDERR.
So we just need to check if putc or getc are filled in the console_device
save 32 bytes on versatilepb
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The fsl gadget driver wants to configure the portsc register
with information from platform_data. When registered from the
chipidea driver there is no platform_data. Fix the resulting
crash by not derefencing platform_data when NULL. In this
case the PORTSC register is not touched, it will have been
configured by the chipidea driver in this case.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Probe ULPI phys during USB initialization and not during driver
probe. This lowers the pressure to have the necessary board specific
setup in place early.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to distinguish which USB port to fixup by pdev->id. This
is < 0 for devicetree probed devices all the time, so this won't
work anymore once we switch to devicetree. Do the fixup on every
port instead, it doesn't hurt.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently we can only (re)scan all USB hosts. Add a function to
scan individual hosts. This is useful for implementing the detect
callback in the next patch.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A command should not be interested in the internal USB core state, so
move the state handling into the core.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This renames the USB devices to reflect the bus structure.
The base name for a USB device is usb<devno>. For each child
device we add a -<parent-port-no>. This makes it more easy
to identify devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This imports of_parse_phandle_with_args and of_count_phandle_with_args
from Linux OF API. The slightly different of_parse_phandles_with_args
is removed and all users are converted to reflect the API change.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
To start synchronizing OF API of barebox with linux OF API, this adds
a length pointer to of_find_property. Also all current users of that
function are updated to reflect the API change.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This breaks HSIC and has no good justification why this would
be needed for ULPI.
This reverts commit 2e7d66f526.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some boards need some more tries to successfully detect a phy. This
happens for example on the pcm038. Try up to four times to detect a
phy.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>