We could only point to partitions in the device tree by using
&norflash, "partname:barebox-environment". Allow to point to the
partition directly without having to parse the partition labels.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some SPI NOR flashes support 4K erase blocks. 4K erase blocks do not
work with UBIFS which needs a minimum erase block size of 15360 bytes.
Also bigger sectors are faster to erase. This patch adds a device tree
option to use the bigger blocks instead of the default 4K blocks.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This adds the new barebox logo to the tree. This is added as svg
image which is converted to different png images during build time. The logo
can be found under /logo/barebox-logo-<width>.png in the running barebox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch realizes framebuffer console support for barebox. It
supports colors and enough escape sequences to show the barebox
console and editor properly.
fbconsole mini-HOWTO
====================
1. compile sandbox barebox with
CONFIG_VIDEO=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_DRIVER_VIDEO_SDL=y
2. run barebox
3. test fbconsole
fbconsole0.active=oe
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This enabled multi image support for the Garz&Fricke Vincell board. Also
it adds the Vincell-LT as a second image with a separate device tree.
Previously we used the same image on both the Vincell and the Vincell-LT
image since the differences are not that significant for barebox. Still
this was good for quite some confusion internally, so let's properly
introduce a second image.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The previous patches changed the UBI naming and made automounting
UBIFS easier. Update the documentation accordingly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch makes it possible to automatically add a suitable root= option
for booting Linux from the same filesystem on which the bootspec entry
has been found. This adds an additional 'linux-appendroot' option to
bootspec which if set to 'true' will cause barebox to automatically
add a root= option. This currently works for NFS, UBIFS and regular
block devices like ATA, SD/MMC using the root=PARTUUID= mechanism.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add the root= parameter for NFS filesystems. We currently hardcode
v3 and tcp which probably needs to become configurable at some point.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It's "uint32" not "u32" and we use integers for the "enum32" defaults.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This change enables Sphinx to resolve the reference.
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit add a very basic code to allow Barebox to be booted from
IRAM. Given that the amount of IRAM on most i.MX variants is
insufficient to contain a copy of Barebox with any reasonable degree
of functionality this code uses IRAM only as a temporary location and
eventually bootstraps from DRAM. But the presense of the intermediate
IRAM-only stage allows to add provisions to test the area of DRAM that
Barebox would be using to facilitate various testing scenarious.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes:
Documentation/boards/am335x.rst:51: WARNING: Title underline too short.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It's not nice to land on a 404 page and having to
search for the right location manually.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All variables starting with global.linux.bootargs. are concatemated
to bootargs, not global.bootargs. .
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a framework to describe, access, store and restore a set of
variables. A state variable set can be fully described in a devicetree node.
This node could be part of the regular devicetree blob or it could be an extra
devicetree solely for the state. The state variable set contains variables of
different types and a place to store the variable set.
For more information see:
Documentation/devicetree/bindings/barebox/barebox,state.rst
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>