The commit
commit be0404c21f
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed May 14 16:08:04 2014 +0200
net: Allow to use multiple network interfaces at once
changes the eth_send() function:
- return eth_current->send(eth_current, packet, length);
+ return edev->send(eth_current, packet, length);
But we have to change the both eth_current occurrences to edev here!
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some network related functions are also needed when networking
is disabled. Move these to a separate file which is always compiled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The separation of incoming packets handling makes it much easier
to run barebox dns client on top of picotcp network stack in the future.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
register_preset_mac_address only works when CONFIG_PARAMETER
is enabled because otherwise dev_set_param is a no-op. Add a
function to set the MAC address explicitly without the need
of CONFIG_PARAMETER and use it where appropriate.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dhcp/bootp was bound to the command functionality.
This patch splits the dhcp command.
We are now able to use bootp without a shell.
This patch adds also a check for environment variables and globalvar.
So only when ENVIRONMENT_VARIABLES and GLOBALVAR is set, all received
dhcp data will be stored.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ping command does not always returns 1 as exit code when connection to
host fails. In particular it returns the exit code of the previous run.
This patch fixes this issue.
Signed-off-by: Mirko Damiani <mirko@develer.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
it's done in the discover packet so let's do it also in the request packet.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
we are not supposed to fill ciaddr, yiaddr and siaddr in the request packet.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In the request packet, we are supposed to copy the IP that the DHCP server
provided in the offer packet so that dhcp_extended can fill the option 50.
There is actually an error in barebox as the pointer to the packet currently
built is used as the source instead of the pointer to the offer packet.
With this patch, barebox now sends a request packet which includes the right
requested IP in option 50.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can use dynamic number id with specific devname
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Activate the netconsole in the set_active callback. Add proper
checks there for port and ip address, print an error when the network
hasn't been configured and finally print when the netconsole has
been enabled successfully. This makes using of the netconsole easier.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
edev->recv has to be called with edev as argument, not eth_current.
This fixes networking when multiple network devices are used and the
current one is switched during runtime.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The help texts are parsed by sphinx which cannot handle macros, so
replace them with their values.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
"ifconfig" and "ip" from normal Linux userspace shows ethernet addresses
normally in lowercase. And the %pM format specifier in Linux does that,
too. Conform to this custom formatting.
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In barebox network packets always go out at the current ethernet
device and are expected to be received from the current interface.
This has some side effects. When for example an NFS is mounted when
one interface is active and the interface is changed afterwards the
NFS packets leave the new interface, but the NFS server won't be
reachable there.
Instead of changing the whole network traffic to the current ethernet
interface we now initialize a network connection with the current
network interface, but then the connection will continue to use that
interface even when the current interface is changed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When doing an ifup set the current interface to the one just
brought up so that it is actually used.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this places the command into the "Network commands"
section of Kconfig
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this compile option actually turns on a command, so name it
accordingly
* also move the Kconfig definition into commands/Kconfig, thus
placing getopt into the "Network commands" section
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this compile option actually turns on a command, so name it
accordingly
* also move the Kconfig definition into commands/Kconfig, thus
placing getopt into the "Network commands" section
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
... because NET_RESOLV can be used alone to turn on the functionality
of resolv().
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:
* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
is listed by character in this (short) option string (the long
description is in the long help text, as before)
* help texts have been reworked, to make them
- sometimes smaller
- sometimes describe the options better
- more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
compiled long help texts
* 'help -v' gives a list of commands with their short description, this
is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.
The old output format (plus grouping) is now available with 'help -v'.
Example:
Information commands:
?, devinfo, help, iomem, meminfo, version
Boot commands:
boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
...
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The command always sets the MAC address of the interface in the code path.
For the static network configuration case it sets it again, due to the
environment variable keyword ("ethaddr") is listed again in the table.
Remove this keyword from the table, because the MAC is already set.
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since commit a162dfe503 the ifup command is
implemented in C and runs up to two external scripts.
If one of these scripts return with an error code, the command terminates
silently. This can confuse a user because there is no hint about the reason
why it fails. Add error messages to avoid this case.
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a convenience function to register a MAC address device
parameter. The only current user is converted to use it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When no connection is opened we should not call into
the networking stack. Otherwise it can happen that we
delay further execution until the network stack detected
a link (or timed out bringing the link up).
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The defaultenv-2 has ifup support as a shell script. This patch
replaces it with a command which is more robust, can be called
from C and now can also bring up all configured interfaces.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise we loose memory on each device_unregister. The ethernet
code used to do this before calling unregister_device. This can
now be removed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
free() already checks the pointer to be non
NULL. No need to do it again.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>