For splashscreen support on pcm049, this patch adds omap4 framebuffer
platform data and configures display pd050vl1, g104x1, pm070wl4, pd104slf,
edt_etm0350G0dh6, edt_etm0430G0dh6, edt_etmv570G2dhu and edt_etm0700G0dh6
Also add extra muxing and defconfig
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is necessary because the C name for the flash header matches
the filename. For multiple board support we have to make the name
unique to prevent linker errors.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is necessary because the C name for the flash header matches
the filename. For multiple board support we have to make the name
unique to prevent linker errors.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This converts the Freescale i.MX53 loco aka qsb board to
multi image. The image will be named:
barebox-freescale-imx53-loco.img
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This also converts the Phytec phyCORE i.MX27 aka pcm038 to use
image compression. The image will be named
barebox-phytec-phycore-imx27.img
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Marvell boards accidently add a .c instead of a .o file
to the targets. This has the side effect of breaking out of tree
compilation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
config.h is automatically generated if not existing, so remove
the empty files and files which only have unused defines.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some boards use function names locally which we introduce as
global functions in the next patch. Rename them to avoid
'static declaration follows non-static declaration' errors.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With of_get_child_by_name from Linux API, we can now convert and remove
of_find_child_by_name.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This patch converts users of of_tree_for_each_node to recently added
for_eacg_compatible_node helper. Also of_tree_for_each_node is removed
from public OF API.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Barebox of_find_node_by_path requires a node to be passed as start node
to start searching. Linux OF API does not pass this node and no current
user of it in barebox is passing anything else than the root node.
Therefore, we rename current function to of_find_node_by_path_from and
introduce a Linux OF API compatible of_find_node_by_path that always
passes the current root_node. Also, all current users of that function
are updated to reflect the API change.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some boards have board specific special clock setups. These are now
done in the SoC specific clock drivers.
It is assumed that most board specific clock setup is done based on
copy/paste from U-Boot. The generalized clock setup differs from
some boards:
- ioclk are adjusted to 480MHz
- ssp clocks are adjusted to 96MHz
- enet out clock is enabled
Some boards adjusted the ioclk to 320MHz and the ssp clock to 160MHz.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For OMAP4460 omap4_scale_vcores must set the voltage according to mpu freq.
OPP100 700MHz 1210mV
OPPTB 920MHz 1320mV
OPPNT 1200MHz 1380mV
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adjusting the PLLs when MMU/caching is already enabled seems to be
unstable on the Smartbook, so do it during early init.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Kernel does not have pinctrl driver for i.MX27 yet. When we using DT,
this cause to unable setup pins to desired function. This patch adds
a setup for MC13783 IRQ pin to avoid this issue.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This settings taken from original DIGI U-boot source code.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without this patch the chipidea driver reports 'No supported role'
during runtime.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Patch will help to develop user devices connected to module, so
user can operate GPIOs in barebox console.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>