This replaces the 'boot' script in the defaultenv-2 with a command
with the same behaviour. A command gives more flexibility for future
externsions
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This new memtest can test the whole unused memory. The new memtest
command try to request the whole unused sdram regions on all banks and
run the mem_test routine from common/memtest.c on it.
The memtest command has only two parameters;
-i Amount of iterations, default 1, iteration of 0 is endless.
-b Set this to skip integrity check.(Do only a fast test for bus lines)
If MMU support is enable, memtest try to run memtest twice. The first with
cache enabled, the second with cache disabled.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We often encounter the situation where slow devices should not be
probed during startup since probing is slow and maybe unnecessary
for unused devices. With MMC we have the 'probe' device parameter,
for ata we have the same, for USB we have the 'usb' command. Overall
this is not very consistent.
With MMC there is the additional problem that the probe parameter
is attached to the logical device when we often have the information
which physical device we want to probe.
This patch adds a 'detect' callback for devices and adds a command
to detect devices and to list the devices which are actually detecable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As of now we have no way to manipulate individual bits of registers on the
command line. This introduces a memory modify command which allows this. It
has the syntax:
mm [OPTIONS] <adr> <val> <mask>
With [OPTIONS] being the usual memory command options (-b, -w, -l, -d <file>).
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Normally in commands we have one file per command which is named like
the command itself. The memory commands are an exception to this. This
patch changes this by separating the memory commands. This also has the
effect that the memory commands can now be selected individually. Along
the way we add some Kconfig help text for the commmands.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The of_property command allows to modify/add/delete properties.
Parsing user input is based on U-Boot code with some fixes added
for catching invalid input.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This command works like the corresponding Unix shell command and
is used for adding, multiplying and much more.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Imported from mtd-utils and stripped down to needed functionality.
Based on an older version (1.4.5.) since the newer do use MEMWRITE
interfaces which we don't have in barebox (yet).
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As a new implementation of Y-Modem protocol is available,
switch from old implementation to the new one :
- remove old xyzModem* files
- remove old command loady2
- rename command loady2 to loady
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current Y-Modem implementation has some limitations:
- Y-Modem/G protocol is not supported
- Multiple files (aka. batch) transfers are not supported
- Transfer speed over fast lines (USB console) is slow
- Code is not trivial to maintain (personnal opinion)
This implementation tries to address all these points by
introducing loady2 command.
The effects are :
- transfer speed for Y-Modem over USB jumps from 2kBytes/s
to 180kBytes/s
- transfer speed for Y-Modem/G jumps to 200kBytes/s
- multiple file transfers are possible
This command was tested on a USB console and UART 9600bps
serial line :
- NAKs (and retransmissions) were tested for faulty
serial lines
- multiple file transfers were tested
- Y-Modem, Y-Modem/G and X-Modem transfers were tested
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for a filetype detection command. It can be
used to print a filename on the console or to set a variable
with the detection result for use in shell scripts.
The command also has an option to print the known filetypes
so that a user knows what to match for.
Based on an earlier version from Jean-Christophe.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This command is based on the 'mii-diag' and 'mii-tool'
Unix utilities, but it lacks routines to manipulate
MII state (e.g. reset MII, restart autonegotiation
or force MII mode).
This version of the 'miitool' command has no GbE support,
but we can upgrade it in the future. The GbE support
patch for generic 'mii-tool' is here
http://ftp.debian.org/debian/pool/main/n/net-tools/net-tools_1.60-24.2.diff.gz
EXAMPLE:
barebox:/ miitool -vv /dev/phy0
negotiated 100baseTx-FD, link ok
registers for MII PHY:
3100 782d 0013 78e2 01e1 45e1 0007 2001
0000 ffff ffff ffff ffff ffff ffff ffff
0084 4780 0000 0000 0422 0000 0000 0000
0000 0000 0080 0000 ffff 0000 0000 3660
product info: Level One LXT971A rev 2
basic mode: autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently in-system update means to write an arbitrary file to
an arbitrary device. There is no sanity check if the flashed image
is of the right type or will fit onto the device. Furthermore some
SoCs need a special preparation step for their images before
flashing them.
This adds a barebox in-system update infrastructure. Boards can
register update handlers which know how to make the board bootable.
The available handlers can be listed to be able to select one,
different force levels give the user the chance to know it better.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds some basic commands to manupulate clocks on the command
line. Right now we have:
- clk_set_parent
- clk_set_rate
- clk_enable
- clk_disable
- clk_dump
The commands work based on the clock name, otherwise they behave like
the Linux Kernel C functions. clk_dump will dump the clocktree to the
console.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Traditionally tftp is a command of its own. Since we can
mount tftp as a filesystem we have duplicated the tftp code, the old
code is used by the tftp command, the new by the filesystem support.
This adds a tftp command based on the filesystem support to preserve
backward compatibility. This allows us to remove the old tftp support
in the next step.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so be can add more format support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
enable is by default for simple and hush
we do not need to NO_SHELL
this allow to save 1KiB
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a command to sleep for n milliseconds.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch allows to present "/dev/zero" always in system and not
depending of mem-command. Standard files allow to test other memory
devices, not only "mem", such as NOR, NAND, MCI-devices e.t.c.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a simple wd command which can setup, trigger and stop a watchdog
on the platform.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This implements global shell variable support. This is done by registering
a new device named 'global', so global variables are just plain device
parameters.
Global variables are useful for storing the global state in the environment.
Currently we do this by sourcing scripts instead of executing them which is
quite limiting.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds an automount command which makes it possible
to execute a script when a certain directory is first accessed.
It's the commands responsibility to make this directory available
(bringing devices up and mounting it). This results in automount
support which makes sure that from the shell every file can
be accessed without having to care for device bringup. Bringing
up devices may be expensive (USB, dhcp). The automount support
makes it easy for the environment to bringup devices when they
are actually needed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add nandtest command to test nand devices
and display ecc stats at the end of test.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- add a usbserial command to enable/disable the serial gadget
- allow dfu and usbserial to cohexist in the same barebox
- add a timeout in u_serial so that we don't get locked if the user
enable usbserial from a UART console but doesn't consume the data
on the usbserial port created on the PC
- remove debug or verbose printf
- tested on i.MX25 & i.MX35 & usb-a926x
Signed-off-by: Eric Bénard <eric@eukrea.com>
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The uimage command superseeds the iminfo command. Unlike
the iminfo command the uimage command can also be used
to verify the data crc on demand and to extract uImages
to files.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to execute a program of the host from barebox
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Using the new uncompress function we can now implement a command which
can uncompress all known compression types. This supplements the unlzo
command.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>