The driver currently erases blocks in 4kb chunks if 4kb support is
available. This patch uses bigger blocks for suitable areas to speed
up erasing areas.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The erase command normally makes sure that the selected area is erased,
therefore align the parameters to eraseblock boundaries.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Tiny6410 and its base board is a pure development platform.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
After adding the base support, the SoC can now be enabled in the build system.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The S3C64XX SoC has a real 32 bit counter, but almost the same style of
registers. It's enough to change the parameters, to get the routines work on
this SoC.
sha: s5p timer works like s3c64xx, so use #else to cover this.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can use decompress in the decompressor
this will simplify multi decompress support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support in defaultenv-2 for booting from disk (SD-Card, USB-Stick).
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use %u instead of %d for an u32 variable
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
enable is by default for simple and hush
we do not need to NO_SHELL
this allow to save 1KiB
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of taking the value from somewhere, use the selected architecture to
select one. This ensures the selected clock source corresponds to the values
setup in the clocks-*.c from the mach directory.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This should work on S3C24XX and S3C64XX SoCs.
Tested at runtime on a Mini2440 and Mini6410.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
More or less just cosmetic (removing ifdefs!).
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The '__maybe_unused' attribute prevents the compiler from warning about an
unused variable and the 'static' will remove it entirely if it's not used.
This patch is only cosmetic.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This bit magic is just setting and reading the UART's selected clock source.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
More or less just cosmetic. Easier to read, and lets the compiler remove unused
code.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The other SoCs differs in many ways from the currently supported S3C2410 and
S3C2440, so remove them.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Although the driver could work on this hardware, i.MX1 support
currently lacks the necessary clocks resulting in linker errors.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Although the spi chipselects should really be const, there is no
good way to fix the compiler warning, so remove the const.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some drivers use gpio_request/gpio_free. Currently no architecture
has code behind these functions. Provide static inline functions
for these and remvoe the at91 specific inline functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Marc Reilly
Juergen Beisert
Jean-Christophe PLAGNIOL-VILLARD
Antony Pavlov
Teresa Gámez
Uwe Kleine-König
Marc Kleine-Budde