The majority of the stuff currently in include/boot.h is about bootm
code implemented common/bootm.c. To be more consistent move it to a
new file include/bootm.h.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes: b1374a6 usb: fastboot: drop CONFIG_COMMAND_SUPPORT dependency
The correct config option to depend on is CONFIG_COMMAND_SUPPORT,
not CONFIG_COMMAND.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This makes it possible to compile the fastboot gadget without
command support. While at it bail out when ubiformat is not
compiled in.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
fixes: 81737c1 mtd: Fix erasing of devices >4GiB
Several places erased a complete flash partition passing ~0 as count to
erase(). With the above commit count to erase was changed from an unsigned
type to a signed type, so the (count > f->size - offset) check in
erase() no longer triggers and the ~0 count is no longer adjusted to the whole
device size. Among other things this results in saveenv failures on NOR
flashes.
This patch fixes this by introducing an explicit macro for erasing the
whole device which is tested for in erase(). All other negative values
are rejected.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Giorgio <giorgio.nicole@arcor.de>
Our asprintf and vasprintf have different prototypes than the glibc
functions. This causes trouble when we want to share barebox code
with userspace code. Change the prototypes for (v)asprintf to match
the glibc prototypes. Since the current (v)asprintf are convenient
to use change the existing functions to b(v)asprintf.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will automatically call barebox_update for the transfered file if
it is an ARM Barebox image and the destination file is defined by some
update handler.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently all fastboot flash commands with UBI images are handled by a
final call to 'ubiformat'. This only makes sense for flash commands
where the target file is a mtd device. If we just want to transfer a UBI
image we would expect a simple copy to the correct location.
This patch checks if the destination file is a MTD device by opening it
and calling an ioctl MEMGETINFO. Only for MTD devices, ubiformat is
called.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This replaces the reset_cpu() function which every SoC or board must
provide with registered handlers. This makes it possible to have multiple
reset functions for boards which have multiple ways to reset the machine.
Also boards which have no way at all to reset the machine no longer
have to provide a dummy reset_cpu() function.
The problem this solves is that some machines have external PMICs or
similar to reset the system which have to be preferred over the
internal SoC reset, because the PMIC can reset not only the SoC but also
the external devices.
To pick the right way to reset a machine each handler has a priority. The
default priority is 100 and all currently existing restart handlers are
registered with this priority. of_get_restart_priority() allows to retrieve
the priority from the device tree which makes it possible for boards to
give certain restart handlers a higher priority in order to use this one
instead of the default one.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will disable the capability to boot an uploaded image directly,
but keeps other fastboot functionality. This seems like a valid config.
Fixes:
In function `do_bootm_on_complete': undefined reference to `bootm_boot'
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Android fastboot protocol Can be used to update firmware and to
issue other lowlevel commands to the bootloader. This adds a
fastboot implementation based on the U-Boot fatboot code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>