As pxafb can rely on a PWM to control backlight, and because
driver dependencies are hard to deal with, remove automatic
enable of PXAFB on probe.
The user should in its environment do a :
- fb0.enable=1
This way, the PWM has been probed and is ready to work, and
the pxafb backlight control works.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adding overlay support for i.MX3 sdc.
Foreground channel only works when background is also enabled.
The foreground video mode is always the same as the background.
Also added alpha command to set the alpha value of the foreground.
Tested on a phyCORE-i.MX35.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The offset for the IPU Clock in the CGR1 register is 18 not 22.
See MCIMX35RM table 14-17.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Make support of multiple video modes possible for i.MX3 boards.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without num_modes the imx fb driver won't work. Specify this
in the boards and also bail out in the driver when num_modes
is unspecified.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
While we are here: do not follow the change of the file name, because there is
no GPIO dependency in this driver.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There are major differences in the clock tree of the S3C24xx family and the
more recent CPUs of the S3C family. Keep the S3C24XX clock routines separate to
avoid an ifdef hell. But also use generic function names to be able to
share drivers among the S3C family.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This LCD driver is for the LCD controller in the S3C2410/S3C2440 CPUs only.
Change its name to reflect its usage and free the way to add LCD controller
drivers for more recent Samsung CPUs.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Start with renaming files to share them in the S3C CPU family,
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add all available video modes to the framebuffer. devinfo fb0
shows the available modes. We can select a mode now.
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Heavily based on original Juergen Beisert's code.
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Video controller of STM allow to control the reset bit of an external
LCD controller. When reset_lcd is set, CTRL1_RESET bit is used to
enable and disable LCD.
Handle USE_LCD_RESET as a flag in imx_fb_platformdata.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When describing an new video interface, it is now possible to select
the bit per pixel. If nothing is chosen 16bpp is selected by default.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We never supported the sigmatel stm chips and probably
never will. So do the first step and rename the architecture
to mxs just like in the kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also, set size to 0 when setting up the framebuffer failed so that
the user cannot write to uninitialized framebuffer memory.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Calling fb_activate_var potentially changes the framebuffer address,
so we have to update the fb0 cdev afterwards.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch add the possibility to change the video mode at barebox's runtime
if the graphics driver in use supports it.
Signed-off-by: <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To setup the default 'enable' setting the "dev_set_param(dev, "enable", "0");"
does not work as expected. After the call the parameter is still "<NULL>".
This is due to any change of the setting is rejected, if the same setting
is already active.
This patch also let the default setting be successfull, but only calls the
graphics backend if a change happens.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bitfield information was only added to fb_info when the
framebuffer actually was enabled. That made it impossible to
call 'bmp' before enabling the display.
So, move all fb_info init to a single place and make it a function
to better allow for multiple displays later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The board code or startup script should enable it when
it actually wants to.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change device parameters so that the memory management is in generic
code. This also removes the need of storing statically initialized
parameters as they are stored in a struct list_head for each device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch allows using the i.MX (LCDC) framebuffer driver on boards
using an i.MX21 SoC.
Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If the DEBUG macro is defined the compiler complains about a missing
'ipu_base' variable.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Uwe Hermann
Robert Jarzmik
Teresa Gámez
Sascha Hauer
Juergen Beisert
Christian Hemp
Jean-Christophe PLAGNIOL-VILLARD
Alexey Galakhov
Gregory CLEMENT
Eric Bénard
Ivo Clarysse
Marc Kleine-Budde