Introduce getenv_ip_dns to be able to do not do the resolv when using it in
resolv for the nameserver (Do not loop).
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
For net boot setups it is useful to submit boot params like server or
bootfile over dhcp. To distinguish diffrent type of OS running on the same hardware,
a custom vendor id can be sent in dhcp discover/request messages.
E.g. the ISC dhcp server can be configured with
| option client-uuid code 97 = { unsigned integer 8, string };
| class "at91sam9x5ek" {
| match if substring (option vendor-class-identifier,0,20) = "barebox-at91sam9x5ek";
|
| filename "/tftpboot/atmel/at91sam9x5/sam9x5ek/zImage";
| if substring (option dhcp-client-identifier,0,7) = "ser2net" {
| filename "/tftpboot/atmel/at91sam9x5/sam9x5ek/zImage-ser2net";
| }
| if substring (option client-uuid,0,7) = "test" {
| filename "/tftpboot/atmel/at91sam9x5/sam9x5ek/zImage-ser2net";
| }
| if substring (option user-class,0,4) = "toto" {
| filename "/tftpboot/atmel/at91sam9x5/sam9x5ek/zImage-toto";
| }
| option tftp-server-name "192.168.200.98";
| option option-150 192.168.200.98;
| next-server 192.168.200.98;
| option root-path "192.168.200.98:/opt/work/buildroot/build/sam9x5/target";
| }
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
For net boot setups it is useful to submit boot params like server or
bootfile over dhcp. To distinguish diffrent type of OS running on the same hardware,
a custom client uuid can be sent in dhcp discover/request messages.
E.g. the ISC dhcp server can be configured with
| option client-uuid code 97 = { unsigned integer 8, string };
| class "at91sam9x5ek" {
| match if substring (option vendor-class-identifier,0,20) = "barebox-at91sam9x5ek";
|
| filename "/tftpboot/atmel/at91sam9x5/sam9x5ek/zImage";
| if substring (option dhcp-client-identifier,0,7) = "ser2net" {
| filename "/tftpboot/atmel/at91sam9x5/sam9x5ek/zImage-ser2net";
| }
| if substring (option client-uuid,0,7) = "test" {
| filename "/tftpboot/atmel/at91sam9x5/sam9x5ek/zImage-ser2net";
| }
| option tftp-server-name "192.168.200.98";
| option option-150 192.168.200.98;
| next-server 192.168.200.98;
| option root-path "192.168.200.98:/opt/work/buildroot/build/sam9x5/target";
| }
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
For net boot setups it is useful to submit boot params like server or
bootfile over dhcp. To distinguish diffrent type of OS running on the same hardware,
a custom client id can be sent in dhcp discover/request messages.
E.g. the ISC dhcp server can be configured with
| class "at91sam9x5ek" {
| match if substring (option vendor-class-identifier,0,20) = "barebox-at91sam9x5ek";
|
| filename "/tftpboot/atmel/at91sam9x5/sam9x5ek/zImage";
| if substring (option dhcp-client-identifier,0,7) = "ser2net" {
| filename "/tftpboot/atmel/at91sam9x5/sam9x5ek/zImage-ser2net";
| }
| option tftp-server-name "192.168.200.98";
| option option-150 192.168.200.98;
| next-server 192.168.200.98;
| option root-path "192.168.200.98:/opt/work/buildroot/build/sam9x5/target";
| }
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
if the DNS is enable resolve it. The server ip will be set if no server ip it
is set in the bootp.
Export it via env dhcp_tftp_server_name.
E.g. the ISC dhcp server can be configured with
| class "at91sam9x5ek" {
| match if substring (option vendor-class-identifier,0,20) = "barebox-at91sam9x
|
| filename "/tftpboot/atmel/at91sam9x5/sam9x5ek/zImage";
| option tftp-server-name "192.168.200.98";
| option root-path "192.168.200.98:/opt/work/buildroot/build/sam9x5/target";
| }
| }
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Instead of using a static switch case the handle the received option
use an array of supported option.
This will allow to unset the env var without duplicating the code.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
For net boot setups it is useful to submit boot params like server or
bootfile over dhcp. To distinguish barebox from e.g. pxe machines,
a custom vendor id can be sent in dhcp discover/request messages.
E.g. the ISC dhcp server can be configured with
| if substring(option vendor-class-identifier,0,8) = "barebox:" {
| next-server 192.168.3.24;
| server-name "192.168.3.24";
| option tftp-server-name "192.168.3.24";
| option root-path = concat("/srv/sysroots/by-mac/",
| binary-to-ascii (16, 8, "-", substring (hardware, 1, 6)));
| }
to sent boot params which are valid for barebox hosts only.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Jean-Christophe PLAGNIOL-VILLARD:
- update the use dhcp command option
- support to set the vendor via env dhcp_vendor_id
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We register a device in eth_register, thus we have to unregister it in
eth_unregister. Also, if the device we unregister is the current device,
we have to set the current eth_device to NULL so that it isn't used anymore.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On my laptop with avahi enabled (linux mdns implementation), the unmount
take quite long, because the avahi daemon tries to resolve the client's
host name. This leads to a delay of about 8 seconds of the unmount reply
messages, so that barebox runs into a timeout. This patch increases the
NFS timeout to 15 to work around the problem.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MAC addresses are sometimes stored at unusual places. This
patch makes it possible to give a MAC address to a ethernet
device id. This is independent of the device actually being
present.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is not yet used, but with this the different network
commands can get rid of their global data.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The idea is to panic() when there is no memory available for normal
operation. Exception: code which can consume arbitrary amount of RAM
(example: files allocated in ramfs) must report error instead of panic().
This patch also fixes code which didn't check for NULL from malloc() etc.
Usage: malloc(), memalign() return NULL when out of RAM.
xmalloc(), xmemalign() always return non-NULL or panic().
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When retrieving the MAC address from EEPROM, we must notify the networking core
at eth registration time. Otherwise we get the 'No MAC address set' warning on
the first network access, and the MAC address is set to a random value instead
of the real one.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this rework is done in order to add a phylib and allow to have phy driver support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Wolfram Sang
Jean-Christophe PLAGNIOL-VILLARD
Enrico Scholz
Sascha Hauer
Marc Kleine-Budde
Krzysztof Halasa
Baruch Siach
Robert Schwebel