We already have MIPS_CONF_M macro in <asm/mipsregs.h> so
we have no need in homebrew CONFIG_M macro.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The power button is not part of the CPU module and can be triggered
wrongly on other baseboards. Disable it since we do not need it
currently.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The TX6 boards come with 3 different PMIC variants from which we
currently only support the ltc3673. Detect the other two by i2c
address and set them up correctly. The code is based on the karo
U-Boot port.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The argument passed to dbbt_data_create() contains the number of blocks,
not the last block. This means we can exit the loop with '<' instead of
'<='
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Based on Kernel commit 240181fd0ffa6 from Brian Norris:
The MTD API reports -EUCLEAN only if the maximum number of bitflips
found in any ECC block exceeds a certain threshold. This is done to
avoid excessive -EUCLEAN reports to MTD users, which may induce
additional scrubbing of data, even when the ECC algorithm in use is
perfectly capable of handling the bitflips.
This threshold can be controlled by user-space (via sysfs), to allow
users to determine what they are willing to tolerate in their
application. But it still helps to have sane defaults.
In recent discussion [1], it was pointed out that our default threshold
is equal to the correction strength. That means that we won't actually
report any -EUCLEAN (i.e., "bitflips were corrected") errors until there
are almost too many to handle. It was determined that 3/4 of the
correction strength is probably a better default.
[1] http://lists.infradead.org/pipermail/linux-mtd/2015-January/057259.html
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
mtd_[read|write|erase] are input functions to the mtd subsystem, so
check for valid input data here rather than relying on the drivers doing
this. The checks are copied from the Kernel as of 4.5-rc5
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a re-application of fix 17644b55.
arm_cpu_lowlevel_init() will set the processor mode to 0x13 (supervisor).
When this function is entered via a different processor mode, register
banking will happen to lr (r14), resulting in an invalid return address.
This fix will preserve the return address manually.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
volume will only be initialized when efi_loaded_image is
set.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The driver was imported from Linux 4.4.
Current implementation supports only XZ decompressor.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The device tree for the 801x variant only contains displays. The
displays are not part of the SoM, but instead of the baseboard,
so they should be described in a baseboard dts. With this patch
we rather include the common tx6x dtsi file and drop 801x from
the barebox device tree names.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX6q variant is basically the same as the i.MX6dl variant, just
with another SoC and the usual i.MX6q/i.MX6dl adjustments.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The TX6 board come with either NAND flash or eMMC as primary
storage medium. This adds support for the eMMC variants.
We can detect if we have NAND or eMMC by looking at the
bootsource which will be configured accordingly. This
way we can modify the device tree during runtime and do
not have to create a new image.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The stuff we currently have in the i.MX6q dts file can be reused for
the i.MX6dl variants, so factor out a common dtsi file.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Remove the fixed malloc area size from the defconfig and allow
barebox to calculate the size dynamically.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Upstream has dropped those from the base dtsi, as long as we can't
fully switch to the upstream board DT add the correct alias to the
barebox copy.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
v7: eof whitespace fixes
A Patch for supporting the Terasic DE0 NANO-SoC with barebox.
The pretty similar Socrates Board was taken as a starting point with pulling
in the memory timings/pinmux from
http://rocketboards.org/foswiki/view/Documentation/AtlasSoCCompileHardwareDesign
Signed-off-by: Tim Sander <tim@krieglstein.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_fixup_status enables or disables the status property of a
given node with a device tree fixup.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added a function to register a fixup to enable or disable
device tree nodes.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since 253fb33 (input: gpio-keys: convert to input framework) the
gpio-buttons are registered with the input framework which has the
side effect that they are activated during boot and no longer have
to be activated manually by activating the input device console.
This reveals that the gpio-button polarities are wrong: The autoboot
is no longer running through since a gpio button press is wrongly
detected.
Fix the polarities in the barebox dts for now to get back a working
board. A proper fix has been sent upstream to the kernel. Once this
has landed and propagated back to barebox this patch can be reverted.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
